View Bid Results For Alloy Steel Round Bar Tenders

We found 2275 Bid Results related to alloy steel round bar tenders. You can find Contractor details who won alloy steel round bar tenders along with contract details in Bid awards announcements section.

Filters
Stage
1635
351
289
Tender Publishing Platform
348
1927
State / UT
36
495
310
209
163
123
108
94
85
80
71
63
56
53
52
37
30
29
27
19
19
18
17
17
17
16
13
12
11
9
7
4
4
4
1
1
1
Contract Value
844
383
818
211
Publish Date
7
2
0
0
0
Sector
30
945
318
155
150
140
134
106
95
46
34
19
17
14
13
12
12
8
8
7
7
7
6
4
4
4
3
2
2
2
1
Ownership
7
984
732
429
118
7
3
2
Within keyword
Active filters:
Showing 1–46 of 2275 tenders matching your filters
1.
Defence #11478095 Technical Bid
Tender For Provision Of Certain Revenue And Minor Work At Age B/R Ii Under Ge(N) Patiala=- 1 Dismantling, Floor, Hearth Or Wall Tiling Including Cm (Bedding (But Not Backing), Removing Serviceable Tiles To Store & Rubbish Off The Premises Complete All As Specified And Directed 2 M&L For Single Charge, Vitrified, Stain & Scratch Resistant, Premium Quality Coloured Tiles Area Of Each Tiles Exceeding 0.42 Sqm But Not Exceeding 1.00 Sqm, In Floors Etc Mm And 8-10 Mm Thick, In Any Pattern Of Light & Dark Tiles As Approved, Laid Over 15 Mm Thick Screed In Cm (1:6) Epoxy Cartridge Tile Grout Using Filling The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour,Complete All As Specified And Directed. 3 All As Per Item No 2 Above But As In Skirting Over 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And Directed. 4 M&L For Ceramic Glossy Finish, Joint Free Premium Quality Coloured Tiles 600 X 300 Mm And 8-9 Mm Thick, In Any Pattern Of Light & Dark/Highlighters Tiles Etc As Approved, On Vertical Surfaces Such As In Skirting/Dado Etc, Set And Including 10 Mm Thick Rendering In Cement Mortar (1:4) And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 5 M & L For 15 Mm Thick Artificial Granite (Of Any Type) Work Steps, Jambs, Pillars, Window- Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite. Including Screed Bed Or Bedding Layer Of Mortar 20 Mm Thick For Laying Floor Finishes Complete All As Specified. 6 Providing And Laying Premium (1St) Quality Straight Edge, Ceramic Tiles Exterior Grade Scratch Resistance Of Size 300X300X7 To 8 Mm Thick In Floors Etc. In Any Shade And Design/Pattern Of Light & Dark Tiles Etc Set And Including 15 Mm Thick Rendering In Cement Mortar (1:6) And Pointed In White Cement With Pigment To Match Complete All As Specified. 7 Taking Up Or Down Existing Steel Tubing And Connections, 15Mm Bore Complete All As Specified. 8 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 15Mm Bore Incl Fittings Complete All As Specified And Directed. 9 Taking Up Or Down Existing Steel Tubing And Connections, 20Mm Bore Complete All As Specified. 10 S&F For Cpvc Pipe Fixed On Wall/Ceiling Or Laying In Floor Of 20Mm Bore Incl Fittings Complete All As Specified And Directed. 11 S&F In Repair Angle Stop Cock With Wall Flange 15Mm Cast Copper Alloy, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No-Fon-40053Pm Or Equivalent In /Hindware/Kohlar. 12 S&F In Repair 15 Mm Bore Bib Cock With Wall Flange, Cast Copper Alloy, Chromium Plated, Fancy Type With Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Long Body.Make: Jaquar Cat Part No Opp-15037Pm Or Equivalent In/Hindware/Kohlar. 13 S&Fin Repair Brass Chromium Plated Basin Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar Cat Part No Orp-10011Bpm Or Equivalent In /Hindware/Kohlar 14 S&F In Repair 15Mm Cp Connection 600Mm Long Including Washer And Brass Nuts All As Specified. 15 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 16 S&F In Repair Counter Top Wash Basin Of Size 600 X465Mm With Wash Basin Cabinet Size 600X455X600Mm Including Bottle Trap , Brass Waste Fitting Complete All As Specified. Make:-Cera/Hindware/Jaguar 17 S&F In Repair Toilet Roll Holder Stainless Steel Flap All As Specified. Make- Jaquar Cat Part No Can-1153S Or Equivalent In /Hindware/Kohlar 18 S&F In Repair Towelrack 600Mm Long With Lower Hanger (Stainless Steel) All As Specified.(Make: Jaquar Cat Part No Acn -1181S Or Equivalent In /Hindware/Kohlar 19 S&F In Repair Soap Dispenser With Glass Bottle (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1135N As Equivalent /Hindware/Kohlar 20 S&F In Repair Soap Dish Holder With Glass (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Akp -35731P Or Equivalent In /Hindware/Kohlar 21 S&Fin Repair Towel Ring Square With Round Flange (Stainless Steel) All As Specified. Make- Jaquar Cat Part No Acn -1121N Or Equivalent In /Hindware/Kohlar 22 S&F In Repair Healthfaucet With 1Mtr Long Easy Flex Tube In Chrome Finish And Wall Hook Of 15 Mm Bore With Cp Pipe Complete Set Of Make -Jaquar Cat Part No Ald - 565 Or Equivalent In Parryware/Prayag 23 S&F In Repair Looking Mirror 5Mm Thick Size 3.5X3.5 Feet Incl Stud And Fastners Complete All As Specified And Directed. 24 S&F In Double Arm Wall Mounted Reversible Plain/Magnifying (X3) Pivotal Mirror All As Specified. Jaquar Cat Part No Acn -1193N Or Equivalent In /Hindware/Kohlar 25 S&F In Repair Glass Shelf Corner With Bracket Of Size 225Mm X 225Mm Thickness Of Glass 6Mm) With Cp Brass Railing And Brass Screws.Make- Jaquar Cat Part No Acn -1173 Or Equivalent In /Hindware/Kohlar 26 S&F Grating Doom 125Mm Of Ptmt. 27 S & F In Repair Vitreous China Urinal Half Stall Type White (Excluding Flushing Cistern ) Including Waste Fitting, Waste Pipe Complete All As Specified.Make-Jaquar/Hindware/Kohlar 28 S&F Ms Work In Tubular/Pipe/Angle Sections For Frame Work For Roof, Vertical Poles, Rafters And Purlins Including Washer Etc Complete All As Directed. 29 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. ( Design Of Sheet As Mangalore Tiles Pattern In Red Colour ). 30 S & F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall,Fixed With Self Tapping Screws As Specified. 31 M & L Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Incl Preparation Of New Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. 32 M&L 25Mm Thick Factory Made Coloured Interlocking Designer Polished Floor Tiles (Ultra Pattern) Of Grade M-35 Of Shape And Size As Directed,And 100Mm X 100Mm Size Tiles Piece On Every Joint Of Tiles Flooring Laid Over & Including 20Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And Directed . Note: Sample Shall Be Got Approved From Ge Before Commencement Of Work 33 S&F In Repair Stainless Steel Drapery Rod Of 20 Mm Inner Dia (In Lengths As Directed) Of & Including Decorative Finial At Both Ends And Pair Of S S Steel Brackets Fixed At Both Ends With Pvc Rawl Plug & Steel Screws On Walls/Beam, (Victorian Design)All As Specified & As Directed. Make -Sample Can Be Seen In The Office Of Engg-In-Charge For Checking And Quoting The Same 34 Demolition Of Cement Concrete Un -Reinforced In Ground Floors And Pavings N.Exc 15Cm Thickness Complete All As Specified. 35 M& L For 25Mm Thick Pcc 1:2:4 Type Bo Using 12.5 Mm Graded Stone Aggregate As In Floor Complete As Specified And Directed. 36 S & F 75 Mm Dia Pvc ( Swr ) Floor Trap, Plain With Grating Including Jointing With Solvent Cement Complete All As Specified. 37 S & F Floor Door Stopper Of Aluminium Alloy And Tongue, Anodised With Hard Drawn Steel Overall Length Of Cover Plate 140Mm.As In Repairs Complete All As Specified. 38 Dismantling Of Wall And Ceiling Board(Fiblre, Pulp, Insulation Etc) Any Thickness Including Cover Fillets Complete All As Specified And As Directed. 39 S & F Powder Coated Aluminum Alloy Interlocking Snap Grid Frame Work For False Ceiling Size 600Mm X 600Mm Consists Of Main Tee Runners Of Size 38Mm X 38Mm X 1.5Mm And Cross Tee Of Size 38Mm X 38Mm X 1.5Mm, Spaced Between The Main Tee At 600Mm Centre To Centre To Form A Grid Of 600Mm X 600Mm Complete All As Specified And As Directed And As Per Manufacturer. Instruction. 40 M & L For 4Mm Thick Non Asbestos Fibre Cement Building Boards Of Make E Board Classic Designer Board (Cascade Or Occenic) Of M/S Everest Industries Ltd Or Equivalent As Approved, By Ge Fixed Or Laid/ Inserted To Timber/Gi/Aluminium Framework With Complete All As Specified And As Directed. 41 Taking Down Cement Mortar Plastering On Brick Or Stone Walls, Etc. Including Raking Out Joints,Hacking For Key,Scrubbing Down With Water, Etc Complete All As Specified And As Directed. 42 M&L For Rendering 15Mm (In Two Layers 10Mm+5Mm) Thick Plaster In Cm (1:4) On Faces Of Brick Work Or Concrete Surfaces, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 43 M&L For Rendering 5Mm Thick Plaster In Cm (1:3) On Faces Of Brick Work Or Concrete On Surfaces Of Ceiling, Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed. 44 Complete Removal Of Existing Treatment Including Washing Rubbing Down And Stopping Of Painted Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 45 M&L For New Plaster Surfaces And Applying 1-2 Mm Thick Metallic Texture Painting (Top Quality) On Walls In Any Colour/Shade/Pattern/Design Including Preperatory Work For Base By Applying Primer/Putty Coat By Any Authorised Applicator Complete All As Specified And Directed 46 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 47 M & L For Cement Concrete As Pcc 1:5:10 Type E-2 Using (40Mm Graded Stone Aggregate) As Foundations,Filling And Mass Concrete Complete All As Specified. 48 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 49 Demolition Of Brick Work Or Stone/Boulder Masonary, Laid In Cement Mortar Or Cement Lime Mortar Complete All As Specified. 50 M&L Brick Work, Straight Or Curved On Plan N.Exc 6M Mean Radius In Cm 1:6 Using Old Size Brick Complete All As Specified. 51 Taking Down Chowkat Or Frame With Shutters (With Out Taking Off Shutter From The Frame ) Not Exceeding 1.5 Sqm Each As Directed By Engineer-In-Charge. 52 S&F For Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door Frames/Chowkhat Comprising Of 100 Mm X 65 Mm Size, Applying Pvc Solvent Cement And Screwed With Full Body Threaded, Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With Mild Steel Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete All As Specified And As Directed By Engr-In-Charge. 53 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Solid Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 54 S&F Stainless Steel (304 Grade) Finished Butt Hinges 125Mm Complete All As Specified And Directed 55 S & F Extruded Brass Handles, Fabricated Type Polished 150 Mm Complete All As Specified. 56 S & F Brass , Barrel Tower Bolts, With Cast Or Sheet Barrel And Rolled Or Cast Bolts And Fixed 200 Mm Complete All As Specified. 57 M&L For 250Mm Long Brass, Sliding Door Bolt Withsand Or Die-Cast Brass Hasp, Staple (Bolt Type) And Fixing Bolt With Rolled Or Drawn Brass Bolts And Fixed Complete All As Specified And As Directed. 58 Dismantling Pvc Pipes With Fittings Upto 75Mm To 110Mm Dia Complete All As Specified And Directed By Engr-In Charge.. 59 S&F For Pvc (Swr) Pipe 110 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 60 S&F For Pvc (Swr) Pipe 75 Mm Dia Single Socketed In Any Length With Rubber Ring Jointed Level Fixed To Walls Complete All As Specified And As Directed. 61 S&F For Pvc (Swr) Bends With Access Door 110 Mm Dia Complete All As Specified And As Directed. 62 All As Per Item No 61 Above But 75 Mm Dia. 63 S&F Pvc (Swr) Plain Bend 110 Mm Dia Complete All As Specified And As Directed. 64 S&F Pvc (Swr) Plain Bend 75 Mm Dia Complete All As Specified And As Directed. 65 S&F Pvc (Swr) Branch Piece Single Or Double T Equal Or Unequal With Access Door 110 Mm Dia Complete All As Specified And As Directed. 66 All As Per Item No 65 But 75 Mm Dia. 67 S&F Pvc (Swr) Vent Cowl 110 Mm Dia Complete All As Specified And As Directed. 68 Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cum, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25Cm, Watering, And Removing Surplus Soil To A Distance N Exc 50 M And Making Good Surface 69 M&L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc. And Making Good, Cutting Not Exc 10 Cm Girth All As Specified. 70 Taking Down Carefully Existing Points Wiring On Surface Conduit/Concealed Conduit Including Conduit From Surface And Expect Conduit In Concealed Wiring For Light/Fan/Socket/Power/Bell From Wall & Roof Along With Fitting And Fixtures Such As Switches, Sockets, Ceiling Roses, Batten Holders, Unserviceable Light Fittings, Pieces Of Wires, Gutties, Conduit, Wooden Boards Etc Removing Materials To Store For Keeping In Safe Custody Of Contractor For Which The Credit Has Been Considered Under Schedule Of Credit And Making Good The Disturbed Portion Of All Floor, Ceiling Etc All As Specified And Directed. 71 M & L For Point Wiring With 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor For One Light/Fan/Bell Point In And Including New Pvc Rigid Non Metallic Concealed Conduit 19/20 Mm Dia, Medium Duty, Isi Marked To Be Terminated In Pressed Steel Terminal Boxes With Pvc Modular Top Cover Plates Of Suitable Size For Mounting Of Modular Type Switches/Sockets/Regulators Including 1.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Earth Continuity Conductor Controlled By One Switch And/Or One Regulator Complete Including Cutting Chases And Making Good The Surfaces In Cm 1:3 And Finishing The Surface As Per Existing Treatment All As Specified And Directed By Engr-In-Charge.Notes: (I) Cost Of Pressed Steel Terminal Boxes And Modular Top Cover Plate Shall Be Included In Point Wiring. (Ii) Wiring Shall Be Done As Per Colour Code In Is For Phase, Neutral And Earth.(Iii) -Cost Of Eye/Bottle Thimbles Used For Connection In Switches/Sockets & Mcbs In Dbs Shall Deemed To Be Included In The Unit Rate Quoted For This Item. 72 All As Per Sl Item No 71.00 Above Herein Before But One Socket Out Let 5 Pins 5 Amp On The Same Board With Other Switches Complete All As Specified And Directed. 73 All As Per Sl Item No 71.00 Above Herein Before But For One Socket Out Let 5 Pins 5 Amp On Independent Board Complete All As Specified And Directed. 74 All As Per Item No71.00 Herein Before But 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Single Core Multistranded Copper Conductor Incl 2.5 Sqmm Pvc Insulated And Unsheathed Frlsh Copper Earth Wire For Switch Socket Combination 3 Pin 15 Amps On Independent Board. 75 S & F In Replacement Of Modular Switch 1 Way, 6 Amps, 1 Module, 230 Volts Complete All As Specified. 76 S & F In Replacement Of Modular Switch 1 Way, 16 Amps, 1 Module, 230 Volts Complete All As Specified. 77 S & F In Replacement Of Modular Socket 5 Pin 6 Amps, 2 Module 230 Volts Complete All As Specified. 78 S & F In Replacement Of Modular Socket 5 Pin 6 &16 Amps, Combination Type 2 Module Complete All As Specified. 79 S & F In Replacement Of Modular Fan Regulator Step Type, 120 Watts, 2 Module Complete Fixed As In Repair All As Specified. 80 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 81 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Green Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 82 Supply And Fix Incl Taking Down Deco Mini Energy Efficient 0.5 Watt B22 Base Led Bulb Red Colour With Colour Temperature 6500 Kelvin, Controller Type Push Button , Globe Shape For Indoor/ Outdoor Usage All As Specified And Directed By Engr In Charge. 83 Supply And Fix Surface/Recess Mounted Led Luminaire 36 Watt Cool White 4000-5000K Suitable For Gridd Celling Cutout Dimensions: 2X2 Ft. Incl Connecting With Twin Core Copper Wire From Ceiling Rose To Fitting, Fixture Size: (Lxwxh) In (595X595X65) Mm Incl Lamp And Driver All As Specified & Directed. 84 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 18/20W 6500K Of Capacity ,20 Watt,4 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 85 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 86 Supply And Fix Mirror Light With Linear & Compact 12 W Mirror Light With Decorative Grey End Caps, Polycarbonate Body And Ribbed Opal Diffuser Of Capacity 9 Watt Complete All As Specified And Directed By Engr-In-Charge. 87 M & L For Sub Main Wiring With Two Single Core 4.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 4 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2 Runs Of 4.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 4.00 Sqm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note2 : Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Bends, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces, Cutting Not Exc. 10 Cm Girth . (Iii) Taking Out/Down Existing Unserviceable Sub Main Wiring. 88 Taking Down And Refixing Of Ceiling Fan After Supply And Replacement Of Rubber Reel, Round Cover Plate Of Size 6 Inch Of Ceiling Fan Complete With Ms Split Clamp Two Nos, Nuts And Bolts Complete All As Specified And Directed By Engr-In-Charge. 89 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 250 Mm Sweep 900 Rpm Engineering Thermoplastic Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Louver Complete All As Specified And Directed By Engineer-In-Charge. 90 Material And Labour For Making Hole Of Suitable Size For Exhaust Fan 250 Mm/ 300Mm Sweep In Wall For Grouting And Making Good The Surface Complete All As Specified And Directed By Engr-In-Charge. 91 Supply And Fixing Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With Mcb Spn 32 Amps, Complete All As Specified And As Directed By Engineer-In-Charge. 92 S&F Poly Coated Gi Frame Work As In Grid For False Ceiling Comprising Of Protected Gi Perimeter Channel 0.55 Mm Thick With Two Unequal Flanges Of 20 And 30Mm And Web Of 27Mm Fixed To Surrounding Wall Using Nylon Sleves And Screws At 450Mm Centre To Centre/Intermediate Chaqnnel 0.9Mm Thick Having To Equal Flanges Of 15Mm Each And Web Of 45 Mm Suspended From Soffit And Approx 900Mm Centre To Centre With Gi Cleat And Steel Expansion Fasterners With And Including Ceiling Section (Not Exc 1.2 Metre Length) Of 0.55Mm Thickness Having Kurled Web Of 50Mm And Flange Of 26Mm Each With Lips Of 10.5Mm Fixed To The Intermediate Channel With Connecting Clips Acorss The Intermediate Channel At 457Mm Centre To Centre And Hangers 6Mm Dia Gi (Upto 1200 Mm Length Adjusting Level Fixed To Roof Slabs By Means Of Ceiling Cleats Made Out Of Gi Flat 40 X3Mm Size 60Mm Long Complete With And Including 7Mm Thick Pvc Laminated Gypsum Tiles Of Size 595X595Mm Complete All As Specified & Directed 93 M&L For Complete Removal Of Existing Surfaces Of Walls Including Cornices, Pillasters Etc, And Applying Two Coats Of Obd Over And Incl A Coat Of Interior Wall Primer Over Wall Care Putty Complete All As Specified And Directed. 94 M&L For Complete Removal Of Existing Treatment On Walls And Applying 02 Coats Of Exterior Weather Emulsion Paint To External Walls/Rcc Surfaces/Soffits Of Chajjas/Roof Projections/Cantilevers/Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer And Over Wall Care Putty Complete All As Specified. 95 S&F Stainless Steel Tubing Of 25 Mm Dia Chromium Plated Min. 1.0 Mm Wall Thickness As In Curtain Rod Complete Incl S&F 02 Nos Stainless Steel Brackets/Finials Fency Type, Stops Fixed With Ss Screws Etc All As Specified & Directed.Note : For The Purpose Of Mesurement And Payment Running Length Of Curtain Rod Only Shall Be Considered. 96 Taking Down Chowkhats Or Frames Of Any Description Exc 1.5 Sqm And N. Exc. 4 Sqm Each (Without Taking Off Shutters From The Frame) Including Cutting Hole To Size For Receive Fresh Pcc Of Hold Fast And Making Good The Disturbed Surface Same Complete All As Specified And Directed. 97 S&F Factory Made Pressed Steel Frames Made Of Ms Sheet Of 1.20 Mm Thickness For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc., Complete As Specified,Size 125X60Mm 98 M&L Pcc 1:3:6 Type C-0 In 12.5 Mm Graded Stone Aggregates Hold Fast Fillinng Inside Frame & Hold Fasts Etc Complete All As Specified 99 S&F Factory Made Flush Shutters 35Mm Thick Ply Construction, Bwp Confirming To Is 2202, Solid Core Construction, With Block Board Core And Plywood Face Panels Commercial Type On Both Sides With 6Mm Thick Lipping Frame To Match Including Supply And Fixing Following Items :(A) Mild Steel Butt Hinges 125Mm - 3 Nos. Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos. Per Leaf(D) Stainless Steel (804 Grade) Finished Sliding Bolt 250 Mm - 1 No. Per Leaf(E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 100 S&F 35Mm Thick Glazed And Skelton Shutters Of 2Nd Class Hard Wood (Factory Made) Open Rebated And Divided To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shutter As Specified In Ssr-91 Pt-1 Section 8 Clause 8.20(A), Kiln Seasoned And Chemically Pressure Treated All As Specified Including Stainless Steel 304 Grade Wire Cloth (0.36Mm Nominal Dia Of Wire And Average Width Of Aperture 1.40Mm) All As Specified And Including Supply And Fixing Following Items :(A) Stainless Steel (304 Grade) Finished Butt Hinges 125Mm - 3 Nos Per Leaf(B) Stainless Steel (304 Grade) Finished Tower Bolt 200Mm Long - 2 Nos Per Leaf(C) Stainless Steel (304 Grade) Finished Handles 150 Mm - 2 Nos Per Leaf(D) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16X250Mm - 1 No Per Leaf (E) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos. Per Leaf. 101 M&L For Two Coat Of Synthetic Enamel Paint (Finishing Coat) Over One Coat Of Pink Primer To New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Incl Prepration Of Surfaces Complete All As Specified And Directed. 102 S&F 300Mm, Ordinary Rat Tail Rod Pattern Springs Including Roller And Roller Plate Complete All As Specified And Directed. 103 S & F In Replacement Of Ceiling Rose Surface Bakelite Surface 65 X 50Mm 3 Terminals All As Specified & Directed 104 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X35 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 105 S & F In Replacement Of Surface Mounted Led Bulk Head Luminaire Of Capacity 10 Watt With Abs Body & Polycarbonate Diffuser, Ip54 Inc Connection With ,With Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 106 Supply And Fix Lamp Holder Including Led Bulb 9 W Including Flexible Wire 0.5 Sqmm Copper Cable All As Specified & Directed By Engr-In-Charge. 107 M & L For Sub Main Wiring With Two Single Core 6.0 Sqmm Pvc Insulated And Unsheathed Frlsh ,Stranded Copper Conductor Cable Drawn Through Pvc Concealed Conduit 25 Mm Dia Including 6.0 Sqmm Pvc Insulated Unsheathed Frlsh Stranded Copper Conductor Cable As Earth Wire All As Specified And Directed By Engineer-In-Charge. Note 1:- 2(Two) Runs Of 6.00 Sqmm Copper Conductor Cable, 1 Run Of Pvc Conduit & 1 Run Of 6.00 Sqmm Copper Conductor Earth Wire Shall Be Measured As One Unit) Note 2 :(I) Rate Quoted For This Items Shall Be Inclusive Of The Cost Of (I) Rigid Non-Metallic Pvc Conduit Of 25 Mm Dia With Tees, Elbows, Reducers, Bell Mouth Tube Ends And Fixing Accessories Such As Couplers, Lock Nuts, Saddles, Pipe Hooks Etc. (Ii) Cutting Chases, Pinning In Making Good To Facing Where Required And Pointing In Cement Mortar 1:3 To Match The Existing Surfaces And Cutting Not Exc. 10 Cm Girth . (Iii) Including Taking Out/Down Existing Unserviceable Sub Main Wiring. 108 S & F In Replacement Of Sheet Metal Enclosure Db Tpn 4 Ways Double Door 415 Volts With 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables Complete With Ip-43 Protection Complete All As Specified And Directed By Engr-In-Charge 109 S & F In Replacement Of Mcb, Triple Pole & Neutral (Tpn) 10 Ka 240 Volts 40 To 63 Amp Capacity Fixing In Db’S Complete All As Specified And Directed. (Note: Mcb Should Be B Or C Curve As Directed By Engineer In Charge) 110 Supply And Fix In Replacement Of Sheet Metal Enclosure 8 Ways Double Door For Dbs When Mcbs Are To Be Used 240,Volts Including 200 Amps Standard Bus Bar Of Suitable Size And Common Neutral Link All Flush Mounting Type, Drilling Holes For Incoming And Out Going Cables With Ip43 Protection Complete All As Specified & Directed By Engr-In-Charge. 111 S & F In Replacement Of Mcb, Single Pole 240 Volts 6 To 32 Amp Capacity For Fixing In Db’S Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 112 Supply And Fix In Replacement Of Mcb , Spn, 240 Volts ,40-63 Amp For Fixing In Dbs Of Including Proper Thimble Connections Complete All As Specified And Directed By Engineer-In-Charge. 113 M & L In Replacement Of Unsv Earthing Complete With Galvanized Iron Earth Plate Electrode Of Size 600X600X6.0Mm , Buried Directly In Ground (Earth Pit Not Less Than 2.25 Mtrs Below Normal Ground Level) With Top Edge Of Earth Plate Not Less Than 1.5 Mtr Below Normal Ground Level, Connected To Galvanized Earth Lead Wire 4.0 Mm Dia By Means Of Bolts , Nuts , Check Nuts And Galvanized Iron Or Steel Including Earth Work In Any Type Of Soil, Charcoal Salt 15 Cm Around The Earth Plate 20 Mm Dia Watering Pipe Medium Grade 1.70 Mtr Long With A Plug At Top, Gi Protection Pipe Light Grade 15 Mm Dia From Earth Pit To Main Board Including Pcc Pit In Cement Concrete 1:2:4 Along With Ci Frame And Cover 10Mm Thick Duly Hinged To Ci Frame As Shown In The Electrical Plate No3 Of Ssr 2009 Part 1 Specification At Page 497. 114 Xlpe Insulated ,Screened, Pvc Bedded, Galvanized Steel Wire Armoured, Electric Power Cables (Heavy Duty) 1100 Volts Grade With Stranded Aluminium Conductor Of Size 25 Sq Mm 4 Core Supplied & Laid In Replacement Complete All As Specified& Directed By Engineer-In-Charge. 115 Excavation In Trenches Not Exceeding 1.5 Mtr Wide And Not Exceeding 1.5 Mtr In Depth For Laying Of Cables Including Getting Out In Any Kind Of Soil Complete All As Specified And Directed. 116 Returning Filling In Including Spreading, Levelling, And Well Ramming, In Layers Not Exceeding 25 Cm Each Layer Of Any Kind Of Soil. 117 Removing Surplus Excavated Material From Site Not Exceeding 50 Mtrs From Starting Point And Depositing Where Directed At Level Not Exceeding 1.5 Mtr Above The Starting Point. 118 Material And Labour For Sand Cushioning For Cables 8 Cm Below The Cable And 15 Cm Above With Dry River Sand In Trenches For Cushioning Of Underground Cable Line Including Spreading, Leveling, Well Ramming Completed All As Specified And Directed. 119 Cutting Of Hardstanding Floor/Wall For Laying Of Cable Including Matching With Suface By Using Cement Concrete All As Specified And Directed. 120 Supplying & Laying Factory Made Unreinforced Precast Concrete Cable Covers Class Lv Type 1, Flat, Size 250X150X40Mm Laid In Trenches As Protection To Cables Complete All As Directed By Engr-In-Charge 121 Material And Labour For Replacement Of Gi Tubing Light Grade 40 Mm Bore For Passing Through Cables Under The Floor ,Along The Wall Or Along The Pole Complete All As Specified And Directed. 122 Dismantling Of Stone Slab And Tiles Laid Bedded And Pointed In Any Mortar Description Or Thickness In Floors, Apron Etc Complete All As Specified. 123 M & L For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Complete All As Specified. 124 M&L For Virified Ceramic Light Shade Tiles 8 - 10 Mm Thick (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc,Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Epoxy Cartridge Tile Grout Using Fill The Joint Of Tiles Complete All As Specified.Note- Epoxy Black,Golden Colour. 125 All As Per Item No 124 But As A Skirting Incl. 10Mm Thick Rendering As In Back Coat Complete All As Specified. 126 M&L For 7 To 8 Mm Ant-Skid Ceramic Joint Free Premium Quality Coloured Tiles Area Of Each Tile Esc 0.06 Spm But Next 0.11Sqm, As In Floors Etc. In Any Pattern Ghe & Dark Tiles As Approved, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match, In Floors Etc. Over & Including 15 Mm Thick Screed In Cement Mortar (1:4) Over And Pointed In White Cement With Pigment To Match The Colour Of Tiles Complete All As Specified. 127 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Laid Over Cement Screed Base 15Mm Thick In Cm 1:6 And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 128 Rounding To Edges Of Stone Slabs One Edge, Such As In Steps, Cooking Platform, And Other Similar Situations All As Specified. 129 Dismantling Water Tanks And Removing To Store Of Capacity Exc 500 & Not Exc 1000 Ltrs Complete All As Specified. 130 Supply And And Fixing, Hoisting Pvc Tank Of 1000 Ltr Capacity Including Supplied And Fixed 20Mm Dia Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe And Fixed.(Minimum Weight 15Mm-142 Gms/20Mm-210Gms/25Mm-455 Gms/40Mm-690 Gms Float Valve Assembly Complete All As Specified And Directed. 131 S&F In Repair Wall Mixture Mixing Valves Incl. Three Joints To Steel Pipes Or Unions 15 Mm Bore Fancy Type Best Quality As Per Sample Approved By Ge Make-Jaquar Cat Part No Qqp-7217Pm Or Equivalent In Hindware/Kohlar. 132 S&F Pvc Cabinet 600X450Mm Overall Size With Looking Mirror Of Selected Qality Glass Mountedover Pvc Framing As Per Sample Complete Fixed In Repair Complete All As Specified. 133 S&F Stainless Steel Plate Rack Of Size Not Less Than 90Cmx75Cm(Wt N. Less Than 4 Kg) Fixed With Stainless Steel Screw Including Taking Out Old Unserviceable Wooden Plate Rack As Approved By Ge Complete All As Specified. 134 S&F In Repairs Chromium Plated Shower Roses With Swivel Joints 125 Mm Dia Size Incl Fixing To Gi Pipe/Union Fixed Make-Jaquar /Hindware/Kohlar. 135 M & L For Rendering 15 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:6 Finished Even And Smooth ( Without Using Extra Cement ) With Sagol Finish On Plastered Surface Complete All As Specified And As Directed. 136 M&L For Preparation Of New Decorated Plastered Or Unplastered Surfaces Of Walls And Applying Two Coats Of Exterior Emulsion Over One Coat Of Primer And Over 2Mm Thick Putty For Levelling And Smoothening, Complete All As Specified And Directed. 137 M&L Preparation Of New Plastered Surface Of Walls And Applying Two Coats Of Oil Bound Distemper Over 1.5Mm Thick Wall Care Putty Complete All As Specified And Directed. 138 M&L For Preparing New Plastered Or Unplastered Surfaces Of Ceiling, And Applying Three Coats Of White Wash Complete All As Specified And Directed. 139 S&F Sinks With Drainage Board Made Of Stainless Steel Lmm Thickkitchen Or Laboratory With Plugs,Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X 460Mm Bowl Size 410Mm X 330Mm X 160Mm Complete All As Specified And Directed. 140 S&F In Repair Brass Chromium Plated Sink Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe Of 15Mm Bore All As Specified And As Directed. Make: Jaquar /Hindware/Kohlar 141 S&F Powder Coated Anodised Aluminium Frame For Doors, Windows Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Complete All As Specified And Directed. 142 S&F Frosted Glass 4.00Mm Thick Ordinary Quality And Glazing With Oil Putty In Square N.Exc 0.50Sqm In Each Panes Complete All As Specified And Directed. 143 S&F 28-30 Mm Thick Moulded Wpc Factory Made 100% Sketon/Glased Door (Conforming As Per Is-4020) Made From 100% Lead Free Single Extruded With 2, 4 Or 6 Raised Panel Design On The Front Side With 10 Mm Deep Mould On Single Side With Wood Grain Texture And Back Side Palin With Density Not Less Than 600 Kg/Cum. Manufactured By An Iso : 9001-2015 Certified Company. The Door Should Be Water Proof, Termite Proof, Fire Etardant And Having Screw Holding Capacity Complete All As Specified 144 S&F Factory Made Wpc Extruded Board Cnc Machine Cut Jali Fixed To Skelton Door As Per Approved Design Complete All As Specified And Directed 145 S&F Kitchen Cabinets Including All Fittings And Fixtures Incl The Follwing. (A) 19Mm Thick Plywood Of Commercial Block Board,Make: Kitply/Century Ply/ Green Ply(B) 1Mm Thick Commerical Lamination On Both Side Fixed To Black Board(Colour And Design As Approved)(C) Ss Pullout Basket Ss Finish Of Plain 15 X 20 X 6 (D) D Type Handle 100Mm Ss Finish(E) Pullout Basket Ss Finish Cutlery Wire Of Size 15X20X4 (F) 2Nd Class Hard As In Frame Work(G)Ss Channels For Pullout Basket As Required. (Note:- The Measurement Shall Be Taken From Front Elevation And Not Girthwise. 146 S&F Factory Made Upvc Brown Colour Door Shutter Made Of Extruded Profile With Wall Thickness Of 2.3Mm(+-0.2Mm) Door Profile With Hollow Section With Multy Chamber. Frame (60X62Mm),Sash(42Mmx67Mm).Sliding Interlock(One Verticle Length In Each Shutter)(45.5Mmx28Mm).Glazing Bead(24.5Mmx16Mm)Will Be Mittred Cut And Fusion Welded At All Corner.Including Drilling Holes For Fixing Hardware And Drainge Of Water Etc Am,.Making Arrangement For Fixing Of Hardware.Epdm Gasket,1.2+0.2 Mm Thick Galvanised Steel Frame(30Mmx21.5Mm).Sash (30Mmx18Mm)Profile To Be Inserted In Required Profile.Frame Will Be Finshed To The Wall With 8Mmx100Mm Long Fasteners.Hardware Touch Lockof Zinc Alloyed(Brown Powder Coated)Steel Roller System Including 5Mm Thick Glazing With Selected Quality Glass ,Aluminium Track And Bottom Rail For Two Track Sliding Fram,Wool Pine For Sliding Sash And Interlock. Note.The Unit Rate Coated By Contractor Includes Cost Of Glass And All Other Conncted Accessories,Net Opening Will Be Measured For Purpose.Make:H2O Window,Fenesta,Anuplast As Approved By Ge. 147 M&L For Rcc 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate In Any Situation Except Foundation Complete All As Specified And Directed. 148 S&F 10Mm Dia And Above Tmt Bars Cut To Length, Bend To Shape As Required Including Cranking, Hooking Ends & Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Complete All As Specified And Directd. 149 All As Item No 77 Here In Before But 5Mm Dia And Over Upto & Including 10Mm Dia In Stirrups, Spaces & Binder Complete All As Specified And Directd. 150 S & F Powder Coated Aluminium Window/Ventilator Shutters, Side Hung Type With Sash Bars, Including Necessay Joinery Cleats, Glazing Clips, Rubber Packing, Chowkats Aluminium Snap Beading, Screws, Suitable Handle Etc With And Including Sheet Glass Or Ordinary Glazing Quality Of 4Mm Thick And Incl Gi Wire Mesh 0.56 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.18 Mm , Size Of Side Rails , Top Rails , Bottom Rail 85X44.5Mm And Size Of Chowkat Frame 101.6X44.45Mm And Thickness Of Aluminium Member Shall Be 1.40Mm Thick Complete All As Specified. 151 S&F For Prelaminated Particle Board 18/19 Mm Interior Grade Prelaminated On One Side With Decorative Choice Lamination And Other Side Balancing White Lamination Fixed With Screw Timber Frame Work Including Dismantling Board All As Specified. 152 S&F In Repair Continuous (Paino) Hinges, Mild Steel, Bright Finish Or Electrogalvanised Width Of Flap (When Open) In 40Mm All As Specified. 153 S&F In Repair 40Mm Dia, Cupboard Knobs Fixed With Nut, Screw And Washer Of Mild Steel Bright Finished All As Specified. 154 S&F Ball Catches With 8Mm Dia Steel Ball And Brass Body And Striking Plate Including Letting In And Fixing Complete All As Specified. 155 Supply & Fix In Replacement Of Modular Bell Push Switch 1 Way, 6 Amps, 1 Module Complete All As Specified. 156 Supply & Fix In Replacement Of Call Bell Ding Dong Ac 230 Volt Single Pole Complete All As Specified. 157 Supply And Fix Exhaust Fan Ac Single Phase 230/240 V Of Size 300 Mm Sweep 900 Rpm Metal Body, High Efficiency Motor, Dynamically Balanced Blade For Better Performance And Corrosion-Resistant Powder Coated Metallic Finish Including Hole Making Louver Complete All As Specified And Directed By Engineer-In-Charge. 158 S & F Modern Energy Efficient Bedroom Muziris Wall Decorative Light Of Capacity 20 Watt Single Headed 240 Volt, Ip20 Rating, Controller Type (Push Button), Product Weight 1.04 Kg, Body Material (Metal), Power Source (Corded Electric),Lamp Base E27, Colour(Bronze) Incl Electrically Connection , Including Removing Of Unserviceable Decorative Light Fittings Of Any Description Complete All As Specified And Directed By Engr-In-Charge. Make: Philips Model No 31425 Or As Equivalent. 159 Excavating In Trenches N Exc 1.50M In Width And N Exc 1.50M In Depth For Foundation, Manholes Etc As Well As N Exc 10 Sqm On Plan Area And Getting Out In Soft/Loose Soil All As Specified And Directed. 160 M&L For Pcc 1:5:10 Type E-2, Using 40Mm Graded Crushed Stone Aggregate In Foundation, Filling And Mass Concrete All As Specified And Directed. 161 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 162 S&F Mild Steel Deformed Bars, 6Mm To 8Mm Dia Cut To Length, Bent To Shape Required Including Cranking And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0-.90Mm Dia Complete. 163 M&L For Form Work To Soffits Of Suspended Slabs Such As Roof Slabs Etc For Rough Finished Concrete Surface Complete All As Specified And Directed. 164 M&L For Form Work To Sides For Slabs And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exc 10 Cm But N Exc 20 Cm Wide For Fair Finished Concrete Surface Complete All As Specified And Directed. 165 Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams And Similar Work, Vertical Or To Batter For Rough Finished Flat Surfaces Of Concrete. 166 Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions, Square, Rectangular Or Polygonal For Rough Finished Flat Surfaces Of Concrete. 167 M&L For Rendering In Cement Mortar (1:6) 10 Mm Thick Finished Even Smooth Complete All As Specified On Brick Or Concrete Surface Of Fair Faces. 168 M&L 15Mm Thick Cement Plaster In Two Layer First Coat In Cm 1:6,10Cm Thick & Second Layer 5Mm Thick In Cm 1:4 Mixed With Wpc 3% By Weight Of Cement Including Finishing Fair & Even On Brick Or Concrete Surfaces Of Othern Than Fair Faces. 169 M&L For 5Mm Thick Cement Plastering To Rcc Surfaces In Cm :1:3) Finished Even And Smooth W/O Using Extra Cement On Ceiling Surfaces. 170 S&F Stainless Steel Butt Hinges Medium Weight Cold Rolled Isi Marked Of Size 100 Mm Complete All As Specified And Directed. 171 M&L For Ms Framed Guard Bars Conforming To Fe-410-0 Or Fe-310-0 Welded To Steel Windows/Ventilations Complete All As Specified And Directed. 172 S&F Vitrous China Squatting Pan Of Orissa Patterns Long Pan Size 580Mx440Mm White With P Or S Trap Front Of Back Inlet And Foot Rest Including Long Band Any Pattern (Excluding Flushing Cistern And Flush Pipe) Including Provision For Lime Concrete Bedding. 173 S&F Pvc Flushing Cistern Low Level 10 Ltr Cap With Inlet Ball Valve Float And Handle Syphonic Action Type Incl Brackets And Flush Pipe Of Polythene Of Low Or High Density Isi Marked. 174 S & F In Repairs Vitreous China Oval Shape Wash Basin, White, Flat Back, Size 580 X 450 Mm Excluding Taps, Waste, Chain And Plug And Porcelain Stopper But Including Brackets With 32 Mm Dia Waste Fittings, Brass, Chromium Plated With Waste Pipe Complete All As Specified. 175 S&F Looking Mirror Of Selected Quality Mounted On 6 Mm Thick Ply And Fixed To Wall With Wooden Plugs Chromium Plated Brass Screws And Washers. 176 S&F For Ci Floor Trap With Incl Jointing With Waste Pipe In Cement Mortar Of Size 100Mm. 177 S&F Gully Trap Stone Ware Square Of Round Mounted Type P Of Size 150X150Mm. 178 S&F 20Mm Dia Stop Valve Of Copper Alloy Screwed Down High Pressure With Crutch Or Butter Fly Handle Screwed On Both Ends For Iron Pipe Or For Union Fixed. 179 S&F Pvc Connection 15Mm Dia 600Mm Long Of Heavy Grade Screwed One End To Inlet Of Whb/Pillar Tap/Cistern Etc Complete Incl Brass Union Coupling On Both Ends Connfirming To Is-3076 Complete With Connector For Connection Old Water. 180 S& F For Ci Pipe 75Mm Dia Laid In Floor In Any Length With Or Without Cars With Cement Joint (Waste & Vent Pipe). 181 All As Per Item No 38 Here In Before But 100Mm Dia. 182 S&F For Ci Bend Any Radius Disminshing Pieces Or Tyes Of 100Mm Bore With Ducks For Or Head Rest. 183 S&F For Ci Branch Pieces Single Equal Or Unequal Ordinary Or Inverted Or With Paralled Brnach 100 Mm Bore. 184 S&F Cast Iron Sand Cast Pipe 100 Mm Dia With Or Without Cars With Cement Joint Fixed To Walls. 185 S&F Cast Iron 100 Mm Cowl. 186 M&L For Pcc 1:4:8 Type D-2 Using 40Mm Graded Stone Aggregate)75Mm Thick On In Sub Base Of Fllor .. 187 M&L For 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directd. 188 M&L For Coloured Glazed Ceramic Tiles On Vertical Surface (300Mmx600Mx7M) Thick Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 189 M&L For Coloured Non Skid Ceramic(300X300Mm) Tiles 7 To 8Mm Thick As In Floor Set And Jointed In Neat Cement Slurry And Pointed With White Cement To Match Complete All As Specified And Directd. 190 S&F Steel Ventilation With Top Hung Shutter Including Hinges, Steel Peg Stay Complete. 191 S&F 4Mm Thick Sheet Glass Of Figured,Pin Headed And Glazing With Oil Putty In Square N Exc 0.50 Sqm In Each. 192 M&L For Preparation Of Newly Steel Surfaces And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Over 10 Cm Width Or Girth Complete All As Specified And Directd. 193 M&L For Preparation Of Newly Plastered Surfaces And Applying Two Coats Of Cement Base Paint Over A Coat Of Chalk Whiting Complete All As Specified And Directd. 194 M&L For Three Coats Of White Wash On Wall Of Newly Plastered Surface. 195 S&F For Preparation Of Newly Plastered Surfaces And Applying Three Coats Of White Wash On Ceiling. 196 M & L For Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With M.S Square Tube, Supplying & Fixing In Opening As Per Specification & Drawing Complete All As Specified And As Directed. 197 S&F Factory Made Solid Pvc Moulded Door Shutter, With Particle Board Core, 28 To 30Mm Thick (Stiles), With 2, 4, Or 6 Raised Panel Design With 2Mm Thick Moulded Pvc Sheet On The Front Face & 2Mm Plain Colour Pvc Sheet On Back Face & 5Mm Thick Plain Colour Pvc Sheet On Back Face, Supplying & Fixing In Frame At Site As Per Specification & Drawing All As Specified. 198 S&F Aluminium Tower Bolt 150Mm Long Stove Enamelled Black With Bright Bolt & Fixed. 199 S&F Aluminium Sliding Door Bolt With Hasp And Staples Type Bolt Type , 300Mm Long Stove Enamelled And Fixing Clips Of Sheet Cast Or Extruded Section Or Cast Aluminium Alloy And Fixed All As Specified. 200 S&F Aluminium Alloy Handle Of 100M Size Oval Type Stove Enamelled & Fixed All As Specified. 201 M&L For Rendering 10Mm Thick Cm (1:4) On Roof Slab Top, Mixed With Water Proofing Liquid Finished Even And Fair Without Using Extra Cement Complete All As Specified. Note: Water Proofing Liquid Shall Be Measured And Paid Separately. 202 M & L For Cleaning The Newly Plastered Surfaces Of Concrete ( Roof Etc) With Wire Brushes And Applying Water Proofing Treatment As Under :-I) Apply One Coat Of Oil Bound Bituminous Primer @ 0.25 Kg/Sq.M Ii) Providing And Laying 3 Mm Thick App Modified Water Proofing Membrane Weighing Not Less Than 3.5 Kg / Sqm Reinforced With Non Woven Polyester Mat Weighing Not Less Than 160 Gm/Sqm All As Specified Procured From Any One Of The Approved ManufacturerS Iii) Apply One Coat Of Solar Reflective Bituminous Aluminium Paint @ 0.15 Kg/Sqm Over Membrane Over Non Assesble Roof Surfaces Complete All As Per ManufacturerS Instructions And As Directed . 203 M/L Brick Work In Cm1:4, In Half Brick Thick Wall. 204 S&F In Repair Europen Wc China Ware Coloured Cascade With Cistern And Complete Fitting.Make: Jaquar/Hindware/Kohlar 205 S/F Vitreous China Toilet Paper Holder Fixed To Walls With Chromium Plated Cp) Brass Screws 206 S/F Vitreous China Soap Dish Of Appx Size 160*160*90Mm Any Type Fixed To Plugs With Chromium Plated Brass Screws 207 S/F Sheet Glass Shelf Assembly Consistig Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Brackets Guard And Railing 60Cm Long 208 S & F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D Type, 60 Cm Long Between Flanges Complete All As Specified. 209 M & L For Granite 20 Mm Thick Machine Cut, Bedded And Jointed With Grey Cement Slurry And Pointed With White Cement With Admixture Of Pigment To Match The Shade Of Granite Stone Including Griding And Polishing Types All As Specified. 210 M & L For Machine Cut Cudappa Stone Slab 20 - 25 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete All As Specified. 211 M&L For 75 Mm Thick Pcc 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Plinth Protection/Floors Complete All As Specified And Directed. 212 S&F Health Faucet Including Ms/Anodised Hanging Device Fixed Complete All As Specified And As Directed. 213 Surface Excavation Not Exceeding 30Cm Deep And Averaging 15Cm Deep And Getting Out In Loose / Soft Soil All As Specified And Directed. 214 M&L For Broken Stone Hard Core Of Gauge N. Exc 63Mm, Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface All As Specified And Directed. 215 M & L 100Mm Thick Pcc 1: 4: 8 Type D2 (Using 40Mm Graded Stone Aggregate) As In Sub Base Complete All As Specified And Directed. 216 M&L For Machine Pressed Precast Concrete Interlocking Paver Block Rubber Moulded Any Shape And Size Confirming To Is 15658-2006 Of 60Mm Thickness, M-35 Grade With Grey And Pigment As In Floor/Pavement Complete All As Specified And As Directed. 217 M&L For Providing Precast Concrete Type C-1, 1:2:4(Using 20Mm Graded Stone Aggregate) As In Kerb Blocks With Plain Fiar Faces, Including Chamferes, Weathering, Throating Etc And Setting In Mortar 1:4 Complete With Joints To Match. 218 M&L For Cement Concrete Type 1:4:8 Type D-2 (Using 40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete Complete All As Specified And As Directed. 219 M & L For Sand Filling Under Floors Or In Foundation Including Watering And Consolidation 220 S & F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light 1X25 Watts Made Up Of Pressure Die Cast Alluminium Housing With High Power Led As Light Source And Lense Embedded Pc Cover Having Top Opening Separate Driver Compartment With Ip65 Protection And Impact Resistance Of Ik07, With All Accessories Including Suitable Bracket With 32Mm Bore Light Grade Gi Pipe Bemd To Shape, Including Ms Clamp Of Size Of Required Size And Pvc Cable 1.5 Sqmm Twincore From Ceiling Rose To Light Fittings Complete All As Specified And Directed By Engineer-In-Charge. 221 S & F In Replacement Tube Light Fitting Self Ballasted Led Batten. Extruded Thermoplastic Body With Pc Diffuser In Square Led Batten 9/10W 6500K Of Capacity ,10 Watt,2 Ft Long Incl 3 Core Flexible Wire 0.5 Sqmm Copper Cable All As Specified And Directed By Engr-In-Charge. 222 M&L For Boring Of Holes Under Road, Pavement, Hard Standing By Trench-Less Technology Using Ultrasound Technique And Necessary Machine Suitable To Pass Through 40 To 80 Mm Bore Gi Tubing And Cable Etc Complete All As Specified And Directed.Note: Gi Pipe Shall Be Measured And Paid Seperately Under Relevant Item.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
2.
Educational and Research Institute #11474153 AOC
Bids Are invited for Fitter Hand Tools Caliper Harmafrodaite - Jenny Caliper Odd Leg Hermaphrodite Caliper 6 Inch 150Mm Adjustable Steel Marking And Scribing Tool For Woodworking And Metalworking 150Mm , Chisel Cold Flat - Drop Forged Chisel 19X25x200mm Heavy Duty Carbon Steel Tool For Woodworking Metal Cutting Masonry Construction And Industrial Applications 20X150mm , Hexa Frame Fixed Type - Heavy Duty Hand Saw, 12 Inch Hacksaw Frame 300Mm , Safety Goggles - Safety Goggles With Clear Lens Lightweight, Scratch And Impact Resistant Safety Glasses For Multipurpose Use For Pollution, Dust, Riding And Construction Work Normal Size , Straight Ede - Straight Edge With Bevel 300Mm , Stud Extrecter - Bolt Screw Extractor Remover Set Easy Out Drill Bits Set Of 8 , Verneir Caliper - Vernier Caliper 150Mm, 6 Inches, Magnetic Steel Made With Pinch Fine Measure Function 150Mm , Marking Table - Surface Finish Hand Scraped Types Hole Type & T-Slot Type Materialcast Iron Size 900X900x900mmpower Consumptioncustomized , Portable Hand Drill Machine Electric Type - Drill 13Mm, 650W, 2800Rpm With Auto Chuck In Bmc Box , Drill Twist Taper Shank - High Speed Steel Taper Shank Twist Drills 8-20Mm , File Round Second Cut - File Round Second Cut 200Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , File Trungular Second Cut - File Trungular Second Cut 200Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , File Flate Second Cut T Safe Edge - File Flate Second Cut T Safe Edge 300Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , File Half Round Second Basterd - File Half Round Second Basterd 250Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , File Round Secont Bastard - File Round Secont Bastard 250Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , File Carad Wire Brush - File Carad Wire Brush 3X5 Inch , Wooden Handal Soldring Iron Copper Bit - Wooden Handle Forged Soldering Iron Copper Bit 250Grm , Blow L - Brass Blow L Pump Blow Torch Blow Gun Kerosene L 0.5L , Inter Chegeable Ratchet Socket Set - Combinational Ratchet Socket Wrench Spannar Tool Goti Set With Carry Box For Automobiles/Bike/Car Repair Tool Kit 32Pc Socket Set (32Pc In Blue Box) 12Mm , Double Ended Tublare Box Spanner Set With Tomm Bar - Tubular Spanner Set, 9Pcs Dual-Ended Wrench Socket Plumber Back Nut Tap Spark Plug Spanner Set Extended Spark Plug Wrench 6-25Mm , Cl Toolmaker - Toolmaker Parallel Cl S- Vice Craft Diy Machine Tools(U) 5-7.5Mm , Hand Reamer Set Taper Pin Straught Fiute - Hand Reamer Set (Tapar Pin Straight Flute) 6-16Mm , Machine Remerr Prallel Helical Fiute - Machine Remerr Prallel Helical Fiute 12-16Mm , Chisel Cold Crosscut And Diamond Point - Diamond Point Cut & Flat Cut Chisel Combo 9X150mm , Adjustable Pipe Die Set Bsp - Pipe Die Set 1X2inch, 3X4inch,1Inch Bsp Die Handle , Wheel Dresser Star Dresser With Holder - Grinding Wheel Dresser, Star Bench Grinding Restorer Device, Grinder Hand Tool Accessories For Wheel Surface Correction, Maintenance, Sharpening, Polishing 150Mm , Machine Vice Swivel Base - Precision Milling Machine Vice, 100 Mm Width, Swivel Base, Heavy Duty 100Mm , Locker With 8 Drawer - Industrial Locker Cabinet With Key Locking Feature 8 Drawer , Metal Rack - Adjustable Set Of 4-Shelf Metal Storage Shelving Unit 1820X1820x450mm , Machine Vice - Precision Milling Machine Vice, 100 Mm Width, Heavy Duty100mm , Wing Compass - Wing Compass Heavy Duty Metal Layout Tool For Machinists Woodworking Metalworking Scribing And Marking Circles 254-300Mm , Hand Hammar With Handle - Steel Club Hammer With Handle 1000Gm , Torque Wrench Standard Ratchet - Heavy Duty Drive Torque Wrench 14-68 Nm Adjustable With Reinforced Gear, Forward/Reverse Ratchet And Ball Lock Design Automotive Torque Wrench For Car Wheels, Bike And Workshop Use , Power Tools For Fastninig - Corded Rotary Hammer 18Mm Electric Drill Machine , Different Profile Gauge Plate Type - Different Profile Gauges Plate Type For Demonstration Mitric Standad , Indexable Boribar With Inserts - Alloy Steel Reduced Shank Indexable Boring Bars, Size 1Inch , Tempreature Gauge - Thermometer Temprature Gauge 0-150Degree C Dial & Bimetal 0-150 C , Dowel Pin Starigut - Dowel Pin Ms (Mild Steel) Standard 1Inch , Standard Tap Screw - Standard Tap Screw 3-16Mm , Lapping Plate - Aluminum Lapping Plate Master Lap 6Inch , Meduam Carboon Heat Trated Alloy Steel Metric Stand - Meduam Carboon Heat Trated Alloy Steel Metric Stand 6-16 Mm , Capsscrew - Capsscrew Mild Steel 6-12Mm , Drill Gauge - Drill Gage 12.5-30Mm , Cast Iron Valve Flanged Type - Cast Iron Pn 1.6 Flanged Sluice Valve, 150Nb Size 150 Mm Body Materialcast Iron , C.I. Sluice Gate Valve Flanged Type - C.I. Sluice Gate Valve Flanged Type 150Nb Materialcast Iron Valves Or Ductile Iron Valveshand Wheel With Wheel Media Water Media Type Water Design Is Standardsurface Finishing Zinc Epoxy Product Typevalves Usage/Application Waterline , Stop Cock - Stopcock Brass Compression Valve - Durable With Bs1010 And Bs En1213 Standards, Stop Tap Isolation Valve For Water Mains 25Nb , Slip On Forge Steel Flange - Slip On Forge Steel Flange Carbon Steel 150Nb , Bolt Nut With Washer - Bolts With Nuts And Washers Full Threaded Hex Socket Cap Screws 20X2.5X90 , Pully For Flat Belt - Motor Pulley Jaw Pully Cone Pully, Multi-Groove 50Mm , Steel Keys - Stainless Steel Key Stock Assortment Set 8Mm 10Mm 12Mm 16Mm 20Mm 25Mm 30Mm Round Ended Parallel Drive Shaft Key Parallel Keys Pulley Feather Key For Fastening Fiting , Packing Gasket - Rubber Packing Gasket, For Industrial Normal Size , Washer Cluth Key Jib Cotter And Cirlip - Washer Cluth Key Jib Cotter And Cirlip 25Mm , Drill Drift - High Speed Steel Ejecting Drill Drifts 200Mm , Bearing Different Type - Bearing Different Type Deep Groove Ball Bearing 25Mm , Lifting Sling - Lift-Up Heavy Duty Steel Wire Rope Sling Eye And Eye Single Body 5Mm Dia 250 Kg Capacity Galvanised Finish Durable Lifting And Rigging Sling 8Mm , Bearing Extactor - Bearing Puller Three Legs 2-3Joy , Pully Extractor - Pulley Extractor, 4 Inch 100Mm Stable And 2 Jaw Gear Puller For Machinery Repair , Flat Headed Hammer With Handel - Soft Face Hammer With Handle Hand Tools For Professionals 250 Gm , Planishshing Hammer - Soft Face Hammer With Handle Hand Tools For Professionals 250 Gm , Snip Bent Left Cut - High Speed Steel Aviation Tin Snip 250Mm , Gauge Snape Go And Not Go - Gauge Type Go No Go Snap Go No Go Type Single Ended Tolerance Class Inspectionhandle Type Plain 25-50Mm , Gauge Pluge - Stainless Steel Bore Depth Checking Plug Gauges 5-55Mm , Gauge Telescopic Set - Telescopic Gauge Bore Gauge, 6 Pack Hole Gauge Set, Premium Steel T-Bore Hole Gauges Set, Measurement Tool, Telescoping Full Round Bore Gauge 8-15Mm , Dial Vernier Cliper Universal - Display Type Analog Material Stainless Steel Packaging Type Box Size 300Mm Dimension300 Mm (Length) Features Shockproof Dial Indicator , Depth Micrometer - Depth Gauge Micrometer Typeanalog Range 0-25Mm Accuracy 0.004Mm Material Stainless Steel Resolution 0.01Mm , Digital Micrometer Outside - Digital Micrometer Outside Electronic Precision Measuring Instrument For Metal And Engineering Use 0-25 , Comparator Gauge Dial Indiate With Stand And Vracket - Comparators Gauge Dial Indication With Stand And Bracket. 0.01Mm , Enggineering Try Squar - Engineer Steel Try Square - 150 Mm 6 Inch Perfect 90 Degree High Grade , Surface Roughnes Comerission Plate - Surface Roughness Comparison Chart, Sa31 N1-N12 Grade , Pipe Bender Machine - Manual Pipe Bending Machine 25 Mm Heavy Duty Round Pipe Bender , Pedastel Type Grinding Machine - Pedastel Type Grinding Machine Motor 2Hp 1.5Kw Power 3Phase 440 Volts 50Hz Rpm 2800 Wheel Size 300Dia Shaft Dia 25Mm , Hexa Frame Wing Nut - Hexa Frame Wing Nut 12Inch Best Tools You Can Depend Upon Made On Cnc Machine As Per Specification Right Choice For Everyone Bolt And Nut Used For Multiple Hacksaw Frames , File Square Secound Cut - File Square Secound Cut 250 Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , File Flat Bastard - File Flat Bastard 300Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel , Stake Grooving - Stake Grooving 100X100x300 Mm For Plastic Laminate Edge Finishing Grade High Carbon Hardened Steel Total Quantity : 274
Contract Date: Ref. Documents Contract Value : 8.80 Lakh
Boards / Undertakings / PSU No of Bidders 6
Madhya Pradesh View Result →
3.
Defence #11465339 Price Bid
Tender for Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each And Removing From Site Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm Eachand N Exc 4 Sqm And Removing From Site Complete All As Specified And Directed.. , Demolition Of Brick Work Built In Cement Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Complete All As Specified And Ditrected. , Dismantling Of Stone Slabs And Tiles Laid Bedded And Pointed In Any Mortar Of Any Description Or Thickness In Floors, Aprons Etc. Complete All As Specified And Directed. , Demolition Of Cement Concrete (Reinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Reinforcement Cut As Required To Facilitate Demoltion Complete All As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Wall Etc Including Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc To Receive New Plaster Etc.Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. , S & F For 35 Mm Thick Factory Made, 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebeated And Prepared To Received Glass, Gauzed, With Out Sash Bar Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Member Of Shutter As Per Specified In Ssr Part-I Section 8, Clause 8.24 (A) And For Door And Fixed With Chowkats, Chemically Pressure Treated Complete All As Specified And As Directed. , S&F For 35Mm Thick 2Nd Class Hard Wood Plain, Framed Pannelled Shutters (Two Panel) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board Wiyh Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per (Is : 1003 Part-I , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. , S&F Powder Coated Aluminium Frame Work (Min Thickness Of Powder Coating 50 Micron) For Doors, Windows, Ventiltors And Partition, (Sliding/Openable/Fix Doors, Windows, Ventilator), Etc With One, Two Or More Rebates (Reqd As Per Site), Section Weighing Not Less Than 0.55 Kg/M, Including Joining Cleat For Fixing With Dash Fasteners Of Required Dia And Size, Incl Filling Up Gaps At Junctions, Ie Top, Bottoms And Sides Etc Complete All As Sspecified And Directed.. , S&Fpowder Coated Aluminium Window And Ventilator Shutters, Sliding/Openable/Fixed (As Per Required At Site) Type Without Sash Bar, Alu Section Weighing 0.55 Kg/M, Including Necessary Locking Arrangement, Guide Wheels, Joining Cleats, Glazing Clips Rubber Packing Anodised Alu Snap Beading Screws Etc Complete All As Specified And Directed. , S&F For Sheet Glass Palin/Coloured (As Per Directed By Engr-In-Charge) 3Mm / 5 Mm Thick Best Quality And Glazing With Rubber Packing, Screws Or Glass Putty In Squares Exc 0.5 Sqm Each Pane Complete All As Specified And Directed. , S & F For Stainless Steel Wire Cloth Of 0.36Mm Dia Wire And Average Width Of Aperture 1.40Mm & Fixed With Tacks Or Screws, Wire Staples, Etc Complete All As Specified And Directed. , S&F Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Plain Colour Pvc Sheet Reinforced With Ms Square Tube With Wooden Grain Printed Pvc Sheet Used Inserted Of Plain Colour Pvc Sheet & Edges Will Be Painted To Match With Printed Sheet Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Plain Colour Pvc ‘C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail. Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Complete All As Specified And Directed. , S&F 100 Mm Long Mild Steel Butt Hinges, Cold Rolled, Medium Weight Complete All As Specified And Directed. , S&F For 125Mm Long Anodised Aluminium Barrel Tower Bolt Of Extruded Section Complete All As Specified And Directed. , S&F 150Mm Long Anodised Aluminium Handles, Cast Type Complete All As Specified And Directed. , S&F300mm Long Aluminium Alloy, Anodized Sliding Door Bolt With Hasp Stapple ( Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed. , S&F For 20 To 25 Mm Dia Stainless Steel Drapery Curtain Rod With Brass /Nickel Chrom Polish / Designer Lattos And Brackets Complete All As Specified And Approved By Engr-In-Charge Including Taking Out Old Pelmet With Curtain Rods Complete All As Specified And Directed. , S&F 300 Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed. , S& F Floor Door Stopper Of Aluminium Alloy Body And Tongue ,Anodised ,With Hard Drawn Steel Spring ,Fixed In Floor Overall Length Of Cover Plate 140Mm Complete All As Specified And Directed. , S & F For Pvc And Cupboard Shelf/ Partition/ Frame / Shutter Of 18Mm Thick Side Of Panel Externally Impact Perfact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick (4Mmx2)X12mm Wide Pvc Sheet Is Used As Gap Insert For Top & Bottom Rail, 18Mm X 1Mm Pvc Edge Lipping Is Done On Top & Bottom Side Using Pvc Solvent Cement Adhesive, Incl Hasp And Stable For Locking Purpose, Etc Complete As Per Direction Of Engr-In-Charge, Manufactures Specification And Drawing Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc. 6M Mean Radius Built In Cement Mortor 1:6., Etc Complete All As Specified And Directed. , M & L For Brick Work With Sub Class B Modular Bricks, Straight Or Curved On Plan To Any Radius Built In Cm 1:4 In Half Brick Thick Walls Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick In Cm 1:4 On Other Than Fair Faces Of Brick Or Concrete Surface With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.(Note:- Liquid Water Proofing Compound To Be Measured Paid Separately) , M&L For Rendering 5Mm Thick In Ceiling Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , Supply Only Integral Water Proofing Compound Complete All As Specified And Directed. , M & L For Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type D2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M & L 25Mm Thick Cement Concrete Type B-0, 1:2:4 (Using 12.5 Mm Graded Aggregate) For Levelling Course In Floors Complete All As Specified And Directed. , M&L For Scratch Free Vitrified Light Shade Floor Tiles 10Mm Thick (Square Or Rectangular) Area Of Each Tile Not Exceeding 0.36 Sqm ,In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With And Including 15Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And Directed. , All As Per Item No 35 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And Directed. , M & L For Non Skid Joint Free Coloured Ceramic Floor Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exc 0.11 Sqm But N Exc 0.18 Sqm,In Floor Etc Set & Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With 15Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Wall Tiles (Textured And Design As Required) In Vertical Surface 450X300x7mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In 1:4 Cm Complete All As Specified And Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Cement Primer And Over A Coat Of 2 To 3Mm Thick Wall Care Putty Complete All As Specified And Directed. , M & L For Preparation Of Newly Plastered Surfaces Of Walls And Applying Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gms/Litre, Of Approved Manufacturer, Of Required Shade And Colour Complete, As Per Manufacturers Specification. Two Or More Coats On New Work Over A Coat Of Wall Care Putty 3Mm Thick Complete All As Specified And Directed. , Material And Labour For Apply Two Coats Of Anti Fungal Weather Coat Acrylic Emulsion Paint Over A Coat Of Primer On New Surfaces Including 2 -3 Mm Thick Wall Putty, Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surface On Ceiling And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Applying Two Coat Of Oil Bound Distemper On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Decorated Plastered Or Unplastered Surface Including Complete Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) On Walls Over 2Mm Thick Plaster Of Paris Putty As Specified And Directed By Engr-In-Charge. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Claim On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M&L For Three Coat Of White Wash On Old Surface On Ceiling Including Preparation Of Surface Complete All As Specified And Directed. , M & L For Machine Cut Kota Stone Slab Flooring 20 To 25Mm Thick (Size Not Less Than 550Mm X 550Mm) Laid & Jointed With Grey Cement Mixed With Pigment To Match The Shade Of Slab Including Rubbing And Mirror Polishing Finished Laid Over And Including 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , M & L For Machine Cut Kota Stone Slab Flooring 18 To 20Mm Thick As In Riser Of Step, Dado And Skirting Over And Including 10Mm Thick 1:4 Cm Backing Coat On Vertical Surface Of Wall With Rubbing And Mirror Polishing Finished Complete All As Specified And As Directed. , M&L Plain Cement Concrete 1:3:6, Type B1( Using 20Mm Graded Stone Aggregate) 75Mm Thick As In Plinth Protection Complete All As Specified And Directed . , Demolition Of Cement Or Lime Concret In Any Despription Along With Tarfelt Treatment In Sunken Portion / Roof And Cement Mortar Bedding From Roof Removal Rubbish Out Side Md Land Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Crushed Stone Aggregate As In Sunken Portion, Subbase, Etc Complete All As Specified And As Directed. , M&L For Rendering 10Mm Thick In Cm 1:4 On Roof Suraces With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Water Proofing Treatment To Sunken Portition / Roof Etc. In Following Sequence:- (I) Properly Cleaning And Drying The Surface (Ii) Applying A Coat Of Bitumen Primer @ 1.2Kg/Sqm And Primer Shall Be Allowed To Dry Over Night. (Iii) Laying App Based Modified Water Proofing Membrane Of Weight Not Less Than 3Kg Per Sqm And Thickness Not Less Than 3 Mm, With 100Mm Overlaps, Sealed And Bonded To The Surface By Torchon Method (Iv) Applying Two Coat Of Bituminous Based Aluminum Painting @ 0.15 Kg/Sqm Each Coat On Water Proofing Treatment With Preparation Of Surfaces Complete All As Specified And Directed. , S&F Vitreous China Wash Down Water Closet Pan Semi Pedestal Pattern(Anglo Indian Type), White (Excluding Fixing Bolts, Flushing Cistern And Flush Pipe(Excluding Flushing Cistern And Flush Pipes) Including Connection To Trap And To Flush Pipe Etc And Lime Concrete Bedding Including P Or S Trap Complete All As Specified And Directed. , M&L In Repairs Pvc Valve Less,Syphonic Action Type Flushing Cistern,Low Level ,White With Inlet Ball Valve,Float And Handle Including Brackets And Connection To Pipe And Fixing Of Chain And Pull Or Lever If Any Complete All As Specified And Directed. , S&F In Repair Vitreous China Wash Hand Basin White Flat Back, Size 550X400 Mm Including Bracket, Taps ,Waste Pipes , Chain And Plug Etc Complete All As Specified And Directed. , S & F In Repairs Pvc (Swr) Nani Trap / Floor Trap Plain Or Multi With Stainless Steel Grating Incl Joining To Waste Pipe With Solvent Cement Joint Dia Of Outlet 75Mm Bore Complete All As Specified And As Directed. , S&F In Repair 110Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S&F In Repair 75Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S & F In Repair 110 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repair 75 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repairs 110Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , S & F In Repairs 75Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , M & L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Not Exc 10Cm Girth Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Dia Old Serviceable / Unserviceable Steel Tubing Any Grade And Connections Cleaning For Re-Fixing Or Removal To Store Complete All As Specified And Directed . , All As Per Item No 65 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F Steel Tubing Medium Grade ,Galvanized With All Fitting Such As Bend ,Elbow, Socket,Tees,And Fixed Complete To Wall Or In Ceiling Or In Floors Including Cutting Threading And Making Forged Bends On Pipes Ms Hooks Etc ,For 15Mm Bore Pipes Complete All As Specified And As Directed. , All As Per Item No 67 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F In Repair For 15Mm Bore Bib Taps Chromium Plated With Crutch Or Butterfly Handle ,Screwed Down , Screwed For Iron Pipes Or Brass Ferrule Complete All As Specified And Directed. , S&F In Repair Cp Angle Stop Cock Of 15Mm Bore Screwed Down For High Pressure With Crutch Or Butter Fly Handle ,Screwed Both End For Iron Pipes Complete All As Specified And Directed.. , S&F In Repair Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe 15Mm Bore Complete All As Specified And As Directed. , S&Fixed In Repair 125 Mm Size Chromium Plated Shower Rose With Siwel Joint Suitable For 15 Mm Bore Gi Pipes Complete All As Specified And Directed. , S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450 Mm Long Complete All As Specified And As Directed. , S& F In Repair Rotational Moulded Polyethylene Water Storage Tank 1000 Liters Capacity (Cylidrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Incl Brass Float Valve 20Mm Dia And Dismantling Water Tank Complete All As Specified And Directed. , S & F In Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300 Grams) Complete All As Specified And Directed. , S&F In Repair Stop Valves Fancy Type Chromium Plated With Long Shanks Fixed With 15 Mm Dia Bore Pipes Complete All As Specified And As Directed. , M & L High Strength Steel Deformed Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping Columns,Hookings Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips, Etc Complete All As Specified And Directed. , M & L For Formwork Fair And Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete M-25 Using 20 Mm Graded Stone Aggr As In Beams, Bands, Cantilvers, Bressummers, Linters, Chajjas, Etc Over 1.5M Span Etc Complete All As Specified And Directed , Demolition And Breaking Up 150Mm Dia Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete ) And Set In Cement Mortar Complete All As Specified And Directed. , M&L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of 150 Mm Bore Pipes In Cement Concrete 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate) After They Are Laid And Tested Complete All As Specified And Directed. , M&L For 150 Mm Bore Salt Glazed Stone Were (Sgsw) Drain Pipe Grade A Laid To Slope In Tranches And Jointed In Cement Mortar (1:1) Including Necessary Testing For Ensuring Teak Proofing Complete All As Specified And Directed. , M & L For Cutting Into Existing Manhole For Connecting New Drains And Making Good To Pipes And Rendering Cutting Out Existing Benching For And Forming Branching For And Forming Branch Channel (1/2 Round Or ¼ Section ) In Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate Smooth Finished And Reforming Benching As Specified And Directed For 150Mm Dia Of Pipe Complete All As Specified And Directed. , M&L Plain Cement Concrete 1:4:8, Type B2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor Complete All As Specified And Directed . , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block (Glossy Finish) Of M-35 Gde Of Approved Shape, Size And Colour Conferming To Is 15658-2006 And Laid Over And Including 25Mm Thick Grid Cushion Complete All As Specified And Directed. , S & F For Precast Cement Concrete Type B-1 (1:2:4) (20Mm Graded Stone Aggregate) As In Kerb And Edging To Road And Footpath Etc, Including Chamfered, Weathering, Throating Etc And Setting In Cm (1:4) Complete All As Specified And Directed. , S & F In Repairs Ms Framed Work As In Doors Or Gates Of Angle Iron, Door Frame Or Other Section With Gusset Plate, Rails, Braces And Stair Case Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering Etc, To Prepared For Hanging Or Sliding With Including Either Hooks And Hinges Also Fastening Grills, Grating, Hold Fast Of Doors And Windows Chowkat Etc, With Ends Of Bars Shouldered And Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework Of Water Tanksand Fixing And Similar Work Confirming To Fe 290 Gde E-165 Complete All As Specified And As Directed. , M&L For Preparation Of New Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , Excavation In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth For Foundation Or Etc, For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc N.Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Soft/Loose Soil, Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:4:8 Type D2, Using 40Mm Graded Stone Aggregate, As In Foundation Filing, And Mass Concrete , Etc Complete All As Specified And Directed , Removing Excavated Material (Soil) To A Distance Not. Exc. 50 Mtr And Depositing Where Directed At A Level Nexc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , M & L Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate) As In Coping, Bearing Course, Manhole/ Drain Channels Etc In Including Necessary Formwork Complete All As Specified And Directed. , M&L For Cement Concrete 1:3:6 Type C-1 Using 20 Mm Graded Stone Aggregatre As In Surface Channels And Drains Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel Exc 30 Cm Inner Girth In Cement Concrete, Using Extra Cement, Including Forms Moulds, Mitred/Stopped Ends Etc Complete All As Specified And Directed. , M & L For Preparing New Plastered Surface On Walls And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M & L 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite With Providing 15Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And As Directed.. , S&F In Repairs Standard Size Ewc White Colour With P/S Trap White Coloured With And Including Pvc White Coloured Seat Cover Including All And Connecting To Flushing Cistern Complete All As Specified And Directed. , Supply And Fixing Health Faucet Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete All As Specified And Directed. , S & F In Repair Soap Dish With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats ( Minimum Weight 105Gm). Complete All As Specified And Directed. , S & F In Repair Tubular Towel Rail 20Mm Dia 600Mm Long Of Brass Chromium Plated Fixed With Including Chromium Plated Brass Screws And Wooden/Plastic Cleats Complete All As Specified And Directed. , Dismantling Of Asbestos Cement (Corrugated, Semicorrugated, Etc.) Sheets In Roof Covering Incl Ridges Etc Complete All As Specified And Directed. , S&F 0.50Mm Thick (Total Coated Thickness) Pre-Colour, Pre-Profiled Galvalume Sheets Of Required Colour And Design Having Tensile Strength Of 550 Mpa As In Roof, Wall Cladding, North Light Curves, Fixed With Zinc Coated Self Drilling Fastener Including Epdm Washer Complete Laid With One Corrugation Side Laps And Min 150Mm End Lap Laid To Slope All As Per Manufacturer/Profile Maker Instruction Complete All As Specified And Directed. , S & F Pre - Painted Galvalume Aluminium Zinc Coating Plain Sheeting 0.50 Mm Thick Of Required Colour And Shape Having Tensile Strength Of 550 Mpa As In Ridge Valley,Gutters,Barge Board,Roof Covering / Cladding To Wall, Fixed With Self Tapping Screwes Complete All As Specified And Directed. , S & F 600Mm X 450Mm Size Beveled Edge Mirror Of 6Mm Thick Selected Quality Mounted On 6Mm Thick Plywood With Chromium Plated Screws With Washer Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M )Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
Jammu And Kashmir View Result →
4.
Health and Family Welfare #11459387 Technical Bid
procurement of dental materials to h. p. government dental college and hospital, shimla-171001 , alginate - per gram , adhesive plaster- per meter , articulating paper - per pkt. , activator tube for facebow , air rotor bur: assorted- per bur , applicator tips -per pkt , addition silicon putty i)regular ii)medium body iii)light body- per pkt , acrylic stone trimmer - assorted , acrylic stone- metal trimmer , amelogenin for periodontal regeneration , arch bar different type- per pkt , assorted brackets 022 mbt premolar to premolar upper lower-per kit , base plate - per pkt , broaches-per pec. , bonding agent 7th generation bond- per ml , bone grafting material: synthetic containing either hydroxyatelie and beta tri calcium phosphate crystals , bp blade size=11,12,15,22,23 nos.- per pec. , bp blade with handle (disposable)-size=11,12,15 nos.- per pec. , bleaching kit agent 37.5% h2o2 - per ml/mg , bleaching kit agent 10% carbemide peroxide- per ml/mg , bio dentine- per gm , bulk fill composite universal restoration , bite registration material , bonding agent for core buildup material , band material premolar- per feet , baccishield solution-ltr. , bupiva caine , cold cure: pink (liquid & powder), clear (liquid & powder) & liquid- per ml/gm , compound benzoin tincture , cold mould seal -per ml , campher phenol , clove oil - per ml , calcium hydroxide powder , crown cutting bur kit , ca(oh)2 iodoform paste syringe/ tubes- per tube , ca(oh)2 based root canal sealer- , ca(oh)2 tubes- per tube , core buildup composite/material with bonding system(conditioner+adhesive-a,b)- per ml/mg , cord poker , composite preparation and finishing kit , composite polishing kit , composite polishing discs assorted with mentstill , composite polishing strips assorted , calcium hydroxide point (15-40) , carbide bur: assorted- per bur , cotton roll , cotton roll- preformed , ceramic finishing kit , cotton bandage 2 , cotton bandage 6 , collagen memberan made of pure type-i collegen 25x25x.2mm- per pkt , collogen periodontal chip -sterile collegen periodontal chip impregnated with 2.5mg chlorhexidine gluconate and thickness 1-2mm , collagen plug type-i , cancellous bone block- rigid with proper fixation size 10x10x20mm , chin cap with vertical pull head gear- per pec. , caries detection dye , denture adhesive powder- per gm , dental varnish- per ml , dental floss , devitaliser arsenic free- per gm , diamond bur: egg shaped, wheel round and wheel burs , disinfectant sleeves for all types of hand pieces etc. - per sleeves , disinfectant for cleaning of burs - per ml , disinfectant and sterilizing solution for surgical instruments - per ml , dental implant sprial- bioline (per implant) , dental implant conical- bioline (per implant) , die stone -per kg , dental stone/stone plaster- per kg , drip set bt/iv set , distilled water for autoclave liter , dextrocose injection 5% , disposable syringes -2ml , disposable syringes -5ml , disposable syringes -10ml , disposable syringes -20ml , disposable sterilized gloves (6,6.5,7 & 7.5 no.) , disposable three layer face mask , disposable nitrile gloves (6.5 & 7 no.) , disposable surgical caps -per pec. , disposable surgical gowns- per pec. , disposable surgical drape set- per pec. , disposable patients drape sheet- per pec. , disposable rvg sleeves- per sleeves , disposable shoes cover-per cover , disposable glasses- per pec. , disposable tisses- per pec. , disposable plasitc impression trays-upper & lower- per pec. , elastic adhesive bandage10cmx4/6m , etchant- per ml/gm , endo rotary file protaper- per pec. , edta gel , ethylene /vinyl acetated co-polymer fiber diameter 0.5 mm containing tetracycline (1 pkt x4 fiber carton) , endo access burs-per bur , elastomeric modules – per pec. , esthetic preformed 10 teeth s.s crowns: anterior / posterior ki t(d4,d5,e4,e5) , elastomeric chain: short, closed & open- per pkt , elastics pkt. extra oral 8 oz, intra oral 1/4, 5/16 & 3/16- per pkt , finger plugger -per pec. , finger spreader- per pec. , flucal gel , flowable composite with etchant - per ml/gm , flowable composite without etchant , flux - per ml , facebow standard short or long- per pec. , fiber reinforced splinting (3 units 8.5cmx2mmx0.2mm)- per strip , file for negotiating calcified canals pkt , formalin 10% -per ml , formalin tablet- per tab , glycerin bottle -per ml , green stick - per pec. , glass ionomer cement lutting - per mg/ml , glass ionomer cement –type-ii -per mg/ml , glass ionomer cement re-inforced restorative-per mg/ml , glass ionomer cement light cure-per mg/ml , gingival cutting burs-per bur , gingival barrier , glucometer strips- pkt , gp point 2%- all type- per pec. , gp points (pkt )=4% & 6% (all type- per pec. , gp sticks , gum paint (ml) , gate glidden drills: size #1, #2, #3- per pec. , gutta purcha solvent- per ml , gc plus tooth mouse- per gram , gauze than- per meter , heat cure pink veined- per mg/ml , heat cure light pink- per mg/ml , h-files different type- per pec. , hand sanitizer -per ml , h² o² solution ml , hand piece oil - per ml , hyrex screw (11 & 13mm)- per pec. , hand niti files -per pec. , isoflurance , impression compound , interim restorative material eugenol free- per gm , inlay wax- per gm , investment material gypsum bounded , investment material phosphate bonded - per gm , intra oral tips for light body- per pec. , k-files different type- per pec. , kit for micro abrasion for teeth , kedo s gold assorted {d1,e1,u1-4%&6% each} , lysol -bottle , lignocaine with adrenaline , lignocaine plain-2% , lignocaine spray , lignocaine jelly-2% , light cure syringes of all kinds of shades , light cure syringes various shades, nano hybrid composite with dual shade , light cure bonding agent for orthodontic bracket(transbond)- per mg/ml , light cure cavity liner- per gm/ml , light cure denture base resin sheets-pkt , ligature wire (.001)- per spool , ligature wire 26 gaze- per spool , light cure opaquer composite syringes (assorted set of shades) , lentulo spiral- per pec. , lingual button (bondable) - per pec. , lingual button (weldable) - per pec. , lip bumper without loops- per pec. , lingual sheath - per pec. , leukoplas adhesive tape- per tap , lazer(8w) perio surgical tips , mackintosh - per meter , molar band material { 0.005x0.180 and 0.006x0.180)- per roll , molar tubes (bondable) upper/lower- single, double & triple- per pec. , molar tubes (weldable) upper/lower- single, double & triple- per pec. , molar tubes 2nd (bondable) - per pec. , molar tubes bondable upper/lower-single - per pec. , mercury - per gram , matrix/mylar strip- per pec. , mouth wash chlorhexidine-per ml , mouth wash betadine - per ltr. , molding wax , membranes for guided bone regeneration resirable bilover collagen memberances- per pec. , mineral trioxide aggregate- per gm , microporus hypoallergenic pressure sensitive adhesive tape for medicaldiffrent type- per meter , micropore surgical tape , medical examination gloves pkt , matrix band (1 & 8 nos.)- per pec. , mini implants screws( 1.5x8, & 1.5x10) , mummifying agent (formacresol)- per ml , metrogyl solution , micro motor burs: tf- fine, round= coarse & straight fissure= coarse , n-95 face mask , ni-ti files- per pec. , niti open coil spring (012”x030) , niti closed coil spring (9mm,11mm) , nylon 4.0 cutting needle pkt , ni ti upper & lower (pkt) , orthodontics bone screws (2x12 & 2x14) , orthodontics mini implant kit , plaster of paris (pop)- per kg/gm , povidine- iodine solution 10% , povidine- iodine solution 5% , povidine- iodine scrub 7.5% , partial teeth u/l anterior assorted (set) 23,24,25,26,27- per set , partial teeth u/l posterior- per set , polishing buff- per pec. , paper point- per pec. , peeso reamer - per pec. , pit & fissure sealant - per ml/mg , plaque disclosing solution two tone disclosing solution to distinguish between old and new plaque 10ml , periodontal pack non eugenol- per gm , pre fabricated posts- per pec. , protraction face mask(petit) , pumice powder- per gram , preformed bands molar permanent ( first permanent molar) - per feet , preformed silicon tip sectional matrix and reinforced rings of two sizes , pattern resins for post and core , polishing strips proxa- per pec. , posterior composite universal (syringes) , ringer lactate-rl , reamer-all type per pec. , retraction cord - per gm/coil , rubber dam sheet size 5x5- per pec. , rubber polishing cups- per pec. , reproximation diamond strip both ended - per pec. , resin reinforce zinc oxide eugenol cement- per ml/gm , resin cement (self etching self adhsive)- per gm. , root canal biocremic sealer -pkt , root canal irrigation solution containing tween-80 , silver amalgam alloy - per gm , suction tip - per pec. , suction catheter: , sponge stone/gelatin sponges , ss crown prefabricated for deciduous molar 3 & 4 nos. , strip crown deciduous ant. , strip crown permanent ant. (box) , spirit -per ltr. , soap (liquid) , soap-per cake , stainless steel wire (pkt) , stainless steel upper & lower (pre-formed) , stainless steel upper & lower wire (straight length) , stainless steel wires (straight length) , surgical burs assorted size pkt , soft reliner permanent (elastomeric) , separators pkt , silver solder pkt , standard expansion screws , seddle matrix system 0.035mm , sodium hypochloride 3% solution , sodium hypo chloride 5% solution , sodium chloride (ns) 0.9% injection , suture silk 4-0, 16mm 3/8 reverse cutting pkt- per pec. , silk suture 3-0, 26mm 3/8 reverse cutting pkt- per pec. , silk suture 5-0, 26mm pkt- per pec. , silk suture with cutting needle 3-0, 26mm pkt- per pec. , silk suture with cutting needle 2-0, 26mm pkt- per pec. , silver diamine fluoride , side vented needle 30 gaze , sectional matrix system-kit , teeth set full : 23,,24,25,26,27- per set , temporization material all shades cool temp. (each shade)- per gm , temporization material , tooth vitality cold test spray , tapered fissure bur flat ended , trans metal burs: tapered fissure, assorted size , tma (straight length)-per pec. , tma -arch wires (pkt)-per pec. , universal dispensing gun for addition silicon- per pec. , ultrasonic activator irrigation tips , vaseline , veinflon , vicryl suture 3.0 reverse cutting body 16mm with 112 circular cutting needle - per pec. , vicryl suture 3.0 reverse cutting body 16mm with 112 circular cutting needle absorbable- per pec. , vicryl suture 4.0 with reverse cutting needle 25 mm- per pec. , vicryl suture 5.0 13 mm 3/8 with reverse cutting needle , wedges - wooden- per pec. , x-ray film iopa - 31 x 41mm -per pkt , x-ray film iopa- peado-per pkt , x-ray film for dry view laser printer :8 x 10 -per pkt , x-ray film for dry view lasar printer:10 x 12 -per pkt , x-ray film occlusal 2.25”x 3”-per pkt , x-ray film developer to develop -per ltr , x-ray film fixture to fixture -per ltr. , dicom x-ray film for cbct-per pkt , a4 glossy sheet-pkt , zoe+idoform (alvogyl)- per gram , zoe impression paste , zinc phosphate cement , zinc oxide powder with eygenol liquid , zirconomer restoration material , 2% chlorhexidine gel- per ml , 2% chlorhexidine solution - per ml , 3d expansion screw with 2 or 3 activation
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 6
Himachal Pradesh View Result →
5.
Public Administrative Department #11441629 Price Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Suri-I Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 5
West Bengal View Result →
6.
Science and Technology #11440503 Technical Bid
Tender for Earth Work , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M.All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lif. , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Cement Concrete (Cast In Situ) , Providing And Laying In Position Excluding Cement Concrete Of Level: Specified Grade The Cost Of Centering And Shuttering - All Work Up To Plinth 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Ill) Derived From Natural Sources: 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying Cement Concrete In Retaining Walls, Return Walls, Walls (Any Thickness) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Sunken Floor Etc., Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering And Finishing: 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Ill) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level.Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Upto Plinth Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement.All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Stone Work , Coursed Rubble Masonry (Second Sort) With Hard Stone In Foundation & Plinth With :Cement Mortar 1:6(1 Cement : 6 Coarse Sand) , Cladding Work , Providing Edge Moulding To 18Mm Thick Marble Stone Counters, Vanities Etc., Including Machine Polishing To Edge To Give Gloss Finish Etc. Complete As Per Design Approved By Engineer-In-Charge,Granite Work , Wood And P. V. C. Work , Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).Sal Wood , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws , Providing 40X5 Mm Flat Iron Hold Fast 400 Mm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 300X100x150 Mm 1:3:6 Mix (1 Cement: 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock With 6 Levers And A Pair Of Lever Handles Of Approved Quality With Necessary Screws Etc. Complete. , Providing And Fixing Aluminium Extruded Section Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is : 3564, Embossed On The Body, Door Weight Upto 36 Kg To 80 Kg And Door Width From 701 Mm To 1000 Mm), With Double Speed Adjustment With Necessary Accessories And Screws Etc. Complete. , Providing And Fixing Aluminium Hanging Floor Door Stopper, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade, With Necessary Screws Etc. Complete.Twin Rubber Stopper , Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/ Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Lnline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For (I) Sites With Basic Wind Speed 45 M/Sec As Per Is 875 - Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speedscasement Window Double Panels With Fixed Mullion With S.S. 304 Friction Hinges As Per Size And Weight Of Sash, Multi-Point Locking System, Zinc Alloy (Zamak) Powder Coated Handles.Using R2 Series With Frame (39 Mm & Above) X (39 Mm & Above) & Sash (39 Mm & Above) X (60 Mm & Above) & Mullion (39 Mm & Above) X (60 Mm & Above). (Height Upto 1.2 Metre). , Steel Work , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Welded Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required.In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Flooring , Providing And Laying Vitrified Tiles In Floor In Diferent Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) Jointing With Grey Cement Slurry @3.3 Kg/Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc. The Tiles Must Be Cut With The Zero Chipping Diamond Cutter Only . Laying Of Tiles Will Be Done With The Notch Trowel, Plier, Wedge, Clips Of Required Thickness, Leveling System And Rubber Mallet For Placing The Tiles Gently And Easily.Double Charge Vitrified Tile Polished Finish Of Size Of Tile 600 X 600 Mm , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge :Flamed Finish Granite Stone Slab Jet Black, Cherry Red, Elite Brown, Cat Eye Or Equivalent. , Finishing , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix:1:4(1 Cement: 4 Coarse Sand) , 6 Mm Cement Plaster 1:3 (1 Cement: 3 Fine Sand) Finished With A Floating Coat Of Neat Cement And Thick Coat Of Lime Wash On Top Of Walls When Dry For Bearing Of Reinforced Cement Concrete Slabs And Beams. , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , 12 Mm Thick Plain Cement Mortar Bands In Cement Mortar 1:4 (1 Cement: 4 Fine Sand):Moulded Band , Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work (Two Or More Coats Applied @ 1.43 Itr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Or More Coats On New Work , French Spirit Polishing :Two Or More Coats On New Works Including A Coat Of Wood Filler , Wall Painting With Acrylic Emulsion Paint, Having Voc (Volatile Organic Compound ) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour.Two Coats , Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content.With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre , Dismantling And Demolishing , Demolishing Cement Concrete Manually/ By Mechanical Means Including Disposal Of Material Within 50 Metres Lead As Per Direction Of Engineer - In - Charge.Nominal Concrete 1:3:6 Or Richer Mix (Including Equivalent Design Mix) , Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. , Aluminium Work , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item):With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Filling The Gap In Between Aluminium Frame & Adjacent Rcc/ Brick/ Stone Work By Providing Weather Silicon Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete.Upto 5 Mm Depth And 5 Mm Width , Market Rate Items , Provinding Precast Cement Concrete Solid Block Masonry Including Hoisting And Setting In Position With Cement Mortar 1:6 (Cement :6 Coarse Sand) Completed As Per The Direction Of Engineer In Charge As Per Site Condition , Providing And Fixing 5 Mm Thick Clear Transparent Acrylic Sheet Of Approved Brand And Manufacture For Fixed Curved Portions In Openings, Including Epdm Rubber/Neoprene Gasket And All Necessary Accessories, Complete In All Respects As Per The Directions Of The Engineer-In-Charge. , Electrical Work , Laying And Fixing Of One No Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Upto 35 Sq.Mm (Clamped With 1Mm Thick Saddle) Size On Wall Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For 4 X 16 Sq. Mm (25Mm) Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. , Supplying And Fixing Of 4 Way (4 + 12), Double Door Surface/ Recess Mounting, Vertical Type, 415 V, Tpn Mcb Distribution Board Of Sheet Steel, Dust Protected, Duly Powder Painted, Inclusive Of 200 A Tinned Copper Bus Bar, Common Neutral Link, Earth Bar, Din Bar For Mounting Mcbs As Required . , Supplying And Fixing 6 Way, Double Door, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator. , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole And Neutral , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole , Supplying & Fixing 5A To 32 A Rating, 240/415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load For Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Triple Pole And Neutral , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.4 X 6 Sq. Mm + 2 X 6 Sq. Mm Earth Wire , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 2 Module (75Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 3 Module (100Mmx75mm) , Supplying And Fixing Following Size/ Modules, Gi Box Along With Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required 6 Module (200Mmx125mm) , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 5/6 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 15/16 A Switch , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 6 Pin 15/16 A Socket Outlet , Supplying And Fixing Following Modular Switch / Socket /Regulator On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Bell Push , 2M Stepped Type Electronic Fan Regulator , Wiring For Light Point/Fan Point/Exhaust Fan Point/Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Group Controlled (Looped) Light Point/ Fanpoint/ Exhaust Fan Point/ Call Bell Point (Without Independent Switch Etc.) With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Pvc Conduit,And Earthing The Point With 1.5 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. (Group-C) , Providing And Fixing 6 Swg Dia G.I Wire On Surface Or In Recess For Loop Earthing As Required. , Supplying, Installation, Testing & Commissioning Of Photo Electronic Smoke Detector With Builtin Led And Mounting Base Plate Suitable With Ms Junction Box For Operation On 12V / 24V Complete With All Connections Etc. As Required. , Supplying, Installation, Testing & Commissioning Of Manual Call Box Of Abs Type In Surface/Recess With Stainless Steel Chain & Hammer Assembly Complete With Glass And Push Button Etc. As Required. , Supplying & Laying Of 2 X 1.5 Sqmm Fire Alarm Armoured Cable, 600/1000V Rated With Annealed Copper Conductor Having Xlpe Insulation, Steel Wire Armouring & Frls Outer Sheath Complete As Required. , Supplying And Fixing Dp Sheet Steel Enclosure On Surface / Recess Along With Upto 32A, 240 V, C Curve Dp Mcb Complete With Connections, Testing And Commissioning Etc. As Required. , Supplying And Fixing 30 A, 415 V, Tpn Industrial Type Socket Outlet, With 4 Pole And Earth, Metal Enclosed Plug Top Alongwith 32 A C Curve, Tpmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A C Curve, Spmcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required , Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep,Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Speed Control Compitable For Electronic Type Regulator And All Remaining Accessories Including Safety Pin,Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Including Fixing Fan Hook In Ceiling Complete As Required. , Supplying, Installation, Testing & Commissioning Of Panel Light 2X2 Ft.,40W Of Powder Coated Die Cast / Extruded Aluminium Body (Thickness ≥ 1.20 Mm) Body Material And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency 85%, Operating Voltage Ac 140 270 Volt, Freq 50/60 Hz, Operating Temp Range -15 Deg To 40 Deg Centigrade, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection, Thd 10% , P. F.≥0.95, Ip20, Cri 80, Ugr (Unified Glare Rating) 19, Flicker Free, (Flicker Should Be Below 5 %), Life Time (Led,Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With, 70% Of Initial Lumen Maintained Till Life Ends As Per Lm80 Extrapolation Ies Tm-21-11Report, Cct 5700°K (As Per Ansi Bin), Sdcm(Standard Deviation Color Matching) 3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Of Relevant Bis Standard And Trade Mark Certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing. Complete In All Respect I/C Connections With 1.5 Sq Mm Frls, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. System Lumen Efficacy ≥105 Lm/Watt Output . Lm79 & Lm80 Test Report From Nabl Lab For All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. , Supplying And Fixing Of 25Mm Size Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. , Supplying And Drawing 1 Run Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays With Perforation Not More Than 17.5%, In Convenient Sections, Joined With Connectors, Suspended/Surface Mount From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Installing 150 Mm Width X 50 Mm Depth X 1.6 Mm Thickness Size Of Perforated Painted With Powder Coating M.S. Cable Trays Bends With Perforation Not More Than 17.5%,, Joined With Connectors, Suspended From The Ceiling With M.S. Suspenders Including Bolts & Nuts, Painting Suspenders Etc As Required. , Supplying And Fixing Call Bell/ Buzzer Suitable For Single Phase, 230 V, Complete As Required. , Supplying And Fixing Fp Mcb Sheet Steel Enclosure With Din Rail On Surface / Recess Etc. As Required. , Supplying & Fixing Of 4Pole, 63 A Rating, 415V, 10Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 16Sq.Mm, Aluminium , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,4C X 6Sq.Mm, Copper , Supply Of Following Core, Size And Conductor 1.1Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Ug Cable In One Length As Per Is : 7098 (Pt-1) 1988,3C X 4 Sq.Mm, Copper , Supply And Laying Of Un Armoured Copper Single Core 10 Sq.Mm Flexible Cable With Annealed Copper Conductor In Suitable Size Hdpe Pipe In Ground/ On Surface As Required. , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.4 X 6 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Copper Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Copper Conductor Cable Of 1.1 Kv Grade As Required.3 X 4 Sq.Mm , Supply ,Installation, Testing And Commissioning Of 2 Tr/24000Btu Per Hour And Bee-5 Star Rated Wall Mounted Inverter Type Hi Wall Split Cooling Air Conditioner Having Wireless Remote Controller, Hermetically Sealed/Scroll/Rotary Compressor And Eco Friendly Refrigerant,Initial Charge Of Refrigerant,Condensor And Evaporator Coils Of Copper Material, Air Filter With Auto Swing & Auto Restart Features, Suitable For Operation On 230V, Single Phase, 50Hz, Ac Power Supply. The Indoor Unit Shall Be Fixed Rigidly On Wall Using Necessary Frame, The Outdoor Unit Shall Be Mounted On Wall Or Floor Using Suitable Powder Coated Ms Angle Frame As Required. Including Clamps, Bolts, Nuts,Vibrating Dampers, Laying Of 3 Meter Standard Length Of Copper Refrigerant Piping With 3 Meter Pvc Covering Pipe, 3 Meter Drain Piping, Wrapping Tape And Necessary Insulation ,Electrical Flexible Cable Connectivity Between Indoor And Outdoor Unit. Necessary Drilling Of Hole And Finishing The Same To Match For The Surrounding As Required. , Supplying And Fixing Of Frp Box 200Mmx140mmx95mm Size (Nominal Size) On Surface With Hinged Door With Suitable Grounding Copper Bar Link With Holes Fitted Inside The Box Etc. As Required. , Supplying And Fixing Of Dual Rj 45 / Io Outlet On Existing Modular Switch Plate. , Supply,Installation,Testing And Commissioning Of Maintenace Free Earth Pit Of Single Pipe Technology Copper Pipe Of 2000Mm Long (Min), Outer Dia 50 Mm, Wall Thickness 1.2Mm(Min), Filled With Highly Conducting Metallic Compounds With The Permanent Sealing At Both The Ends And Lead Terminal Of 50 X 10 Mm Size At The Top The Length Of The Electrode Shall Be 2000 Mm Excluding The Lead Terminal And The Length Of The Lead Terminal At The Top Shall Be Minimum 50Mm. To Ensure The Moisture Content And Electrical Conductivity, Resistance Lowering Grounding Minerals Shall Be Filled Around The Electrode Of (Min25 Kg) .Heavy Duty Weather Proof Plastic Earth Pit Chamber With Cover Of Dimension 300 Mm Dia (Top), 260 Mm Dia(Bottom) And 300 Mm (Height) Shall Be Used, Numbering Of Pit And Measured Value Written With Weather Proof Painting Or Stickering. As Required.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
7.
Public Administrative Department #11437950 Technical Bid
Tender for Fixation Of Local Market Rate For Implementation Of Different Scheme Under Mgnrega Under Rajnagar Development Block. , Hire Charges Of Concrete Mixer With Fuel 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller With Fuel- 8 To 10 Tonne , Vibrator With Fuel (Needle Type 40 Mm) , Surface Vibrator With Fuel , Water Tanker 5000 Ltr. Capacity , Coolie , Fitter(Grade1) , Technician , Helper (Technician) , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Coal Tar , Portland Cement , White Cement , Coal (Steam) , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Moorum , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Galvanised Steel Plain Sheets , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , G.I. Plain Washer For Seam Bolts , Water Proofing Materials , Welding By Electric Plant , Wire Mesh (Rabbit) , Diesel Oil , C.I. Grating 100X100 Mm , Mirror Of Superior Make Glass 60X45 Cm , Vitreous China Pedestal For Wash Basin , Gi Pipes 15 Mm Dia , Gi Pipes 20 Mm Dia , Gi Pipes 25 Mm Dia , Gi Pipes 32 Mm Dia , Gi Pipes 40Mm Dia , Gi Pipes 50 Mm Dia , Gi Pipes 65 Mm Dia , Gi Pipes 80 Mm Dia , Slotted Cowl 75 Mm , Slotted Cowl 110 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Reinforced Cement Concrete Pipes Np2 Class 300 Mm Dia , Reinforced Cement Concrete Pipes Np2 Class 450 Mm Dia , White Plastic Seat (Solid) With Lid C.P. Brass Hinges And Rubber Buffers , Shower Rose C.P Brass For 15 To 20 Mm Inner 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Inner 150 Mm Dia , Vitreous China Squatting Plate , Ball Valve 15 Mm Dia , Ball Valve 20 Mm Dia , Ball Valve 25 Mm Dia , Brass Full Way Valve With C.I. Wheel (Screwed End) 20 Mm Dia , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Angle Back Wash Basin 400X400 Mm , Vitreous China Foot Rest 275Mmx125mmx25mm , Carriage Of Steam Coal , Carriage Of Stone Aggregate Below 40 Mm Nominal Size , Carriage Of Steel , Carriage Of Stone Aggregate 40 Mm Nominal Size And Above , Carriage Of Tar Bitumen , Carriage Of Soling Stone & Masonry Stone , Carriage Of Carriage Of Moorum , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , Anodised Aluminium Hanging Type Door Stopper , Carriage Of Cost Of Neelgiri/Maxican Grass Truf Sqm , Galvanised Steel Corrugated Sheets , Vitreous China Flat Back Wash Basin 550X400 Mm , Stainless Steel Bolts /Square Bar And Plates , Mild Steel Tubes Hot Finished Seamless Type , Red Oxide Zinc Chromate Primer , Vitreous China Flat Back Wash Basin 450X300 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay (Straight Peg Type) 300 Mm Not Less Than 0.33 Kg , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) P Trap , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Supply Of Upvc Pipe 110 Mm Dia , Supply Of Upvc Plain Tee 75 Mm Dia , Supply Of Upvc Plain Tee 110 Mm Dia , Supply Of Upvc Door Tee 75 Mm Dia , Supply Of Upvc Door Tee 110 Mm Dia , Supply Of Upvc 87.5* Bend 75 Mm Dia , Supply Of Upvc 87.5* Bend 110 Mm Dia , Upvc Pipe Clip 75 Mm , Upvc Pipe Clip 110 Mm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , Chromium Plated Concealed Stop Cock , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , White Vitreous China Clay Half Stall Urinal Flat Back 580X380x350 Mm Or Angle Back 450X375x350 Mm With Waste Fittings As Per Is: 2556 , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Coloured Inter Locking cement concrete Paver Block , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Adhesive Solvent Cement , Geotextile 120 Gram Per Sqm Membrane , Acrylic Exterior Paint , Vitrified Floor Tile 60X60 Cm , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , G I Wire , Paddy Straw , Nylon Net , 1St Class Picked Jhama Bricks(Traditional) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Laterite Boulder , Fine Sand , Medium Sand , Coarse Sand , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Monkey Set , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , 1St Class Traditional Bricks (Kiln Burnt) , River Bed Material 40 Mm Down , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Loading, Unloading And Stacking By Manual Means Of Steel , Sal Silliguri , Sal Malaysia , Neem Wood , Other Local Wood , Ordinary Teak Wood , Sisu/Gamar Wood , Local Sal Wood , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Coal Tarring , Fan Hook , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , 32 Mm Dia Polythene Flush Pipe , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Thermocol 12.5 Mm Thick. , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Supplying, Fitting And Fixing Pillar Cock Of Approved Make.Cp Pillar Cock - 15 Mm. (Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand). , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , Fly Ash Bricks(Traditional) , Iron Hasp Bolt 250Mm Long , Iron Door Ring 50Mm Dia , Iron Catch Hook 6Mm Dia 225Mm Long , M.S Clamps 40Mm X 6Mm, 125Mm Length , Anodised Aluminium Barrel / Tower / Socket Bolt 150Mm Long X 10Mm Dia. Bolt. , Anodised Aluminium Barrel / Tower / Socket Bolt 300Mm Long X 10Mm Dia. Bolt. , Anodised Aliminium D-Type Handle Continuous Plate Base (Hexagonal/ Round Rod) 150 Mm Grip X 10 Mm Dia Rod , Towel Rail (Cp Over Brass )- 600 Mm , Collapsible Gate , Steel Railing , Ms Integrated Grill For Steel Window And Ventillator , 1.5 Mm Thick Ms Sheet , Ci Manhole Cover 450 Mm Dia , C.P. Over Brass Waste Fittings 32 Mm , Malayasia Sal Cleat , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , C.P. Over Brass Waste Fittings 32 Mm , Empty Gunny Bag , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps900 Mm Long , Waste Pipe With Pvc Coupling 750 Mm Long , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , False Ceiling (With 6Mm Thick Fibre Cement Designer Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging 1.6 Mm Thick Shhet , Fitting & Fixing Circular Corrugated Aluminium Sheet , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Supplying Solid Flush Type Doors Of Commercial Quality , Supplying Fitting And Fixing Of Bitumen Drum Sheet Including Nails For Pilling Or Other Works. , Bitumen Vg-30 , Modular Fly Ash Bricks , Modular Fly Ash Bricks Traditional , Bitumen Emulsion , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Grade 1 Stone Metal 63 Mm To 45 Mm , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Polythene Sheet (150 Gm Per Sqm) , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Reducing Socket 20Mm X 15Mm , Reducing Socket 25Mm X 20Mm , Reducing Socket 25Mm X 15Mm , Reducing Elbow 20 Mm X 15 Mm , Reducing Elbow 25 Mm X 20 Mm , Silver Sand , Ibs Display Board , Community Display Board
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
8.
Housing Urban and Rular Development #11432178 Price Bid
Tender for Excavation In Foundation For Retaining, Breast Walls Etc, In All Types Of Soils And Rocks Including All Lead, Lift And Disposal Of Surplus Material As Per Direction Of Engineer - In - Charge, As Per Drawing And Technical Specifications Clause 305.1 Of Mord Specifiction , Removal Of Unsuitable Soil With Disposal Upto 1000 M Removal Of Unsuitable Soil Including Excavation, Loading And Disposal Upto 1000 M Lead But Excluding Compaction Ground Supporting Embankment Subgrade Replacement By Suitable Soil, Which Shall Be Paid Separately As Per Clause 303.5.2 As Per Technical Specification Clause 302.3.11 , Concrete With Cement, Coarse Sand And 40 Mm Gauge Stone Ballast In Proportion 1:4:8 In Foundations And Floors Including Supply Of All Material, Labour And T&P Etc. Required Forproper Completion Of The Work. As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 , Random Rubble Stone Masonry Laid In 1:6 Cement And Sand Mortar, In Breast Walls, Retaining Walls, Parapets, Scuppers, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , Random Rubble Stone Masonry Laid Dry, In Breast Walls, Retaining Walls, Etc. Including Supply Of All Material, Labour, T&P And Royaltiies Etc. Complete As Per Drawing And Technical Specifications Clauses 702, 704, 1202 & 1203 Of Mord Specifiction , Hand Packed Stone Filling In Back Of Wallls Including Cost Of All Materials, Royality, T&P Etc. Complete As Per Direction Of Engineer-In- Charge. (As Per Pwd Uttarakhand Specifications) , Providing Weepholes In Brick Masonry/Stone Masonry, Lain / Reinforced Concrete Abutment, Wing Wall, Return Wall With 100 Mm Dia Ac Pipe Extending Through The Full Width Of The Structures With Slope Of 1(V):20(H) Towards Drawing Face Complete As Per Drawing And Technical Specification Clauses 614, 709, 1204.3.7 , Excavation In Hilly Areas In Ordinary Rock By Mechanical Means Not Requiring Blasting (With Out Dozer) Excavation In Hilly Area In Ordinary Rock Not Requiring Blasting By Mechanical Means Without Using Dozer Including Cutting And Trimming Of Slopes And Disposal Of Cut Material With A Lift Upto 1.5 M And Lead Upto 20 M As Per Clause 1603.2. , Providing And Laying Of Stone Set Pavement Over 2.5 Cm Thick Bedding Layer Of Plain Cement Concrete 1:2:4 Which Shall Further Be Placed Over 10 Cm Thick Dry Stone Kharanja Or Crushed Stones Base Over A Prepared Subgrade As Per Drawings And Technical Specifications. The Size Of Stones Shall Not Be Less Than 20Cm X 20Cm And Thickness Of Stones Shall Vary From 10Cm To 15 Cm. The Work Includes Filling Of Joints With Plain Cement Concrete 1:2:4 As Per The Standard Drawings And Instructions Of The Engineer-In-Charge. , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, For All Lift, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : - 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 6.4.1 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:6 (1 Cement: 6 Fine Sand) - Outer Plaster , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : 13.41.1 New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete.Hot Finished Seamless Type Tubes , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggreentrance Gate 20 Mm Nominal Size Derived From Natural Sources) , Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggreentrance Gate 20 Mm Nominal Size) Upto Plinth Level With : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggreentrance Gate 20 Mm Nominal Size Derived From Natural Sources) , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Columns, Pillars, Piers, Abutments, Posts And Struts , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Centering And Shuttering Including Strutting, Propping Etc. Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers With Water Proof Ply 12 Mm Thick , Random Rubble Masonry With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like. Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Pointing On Stone Work With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) : Raised And Cut Pointing , Providing And Fixing 2Nd Class Teak Wood Plain Lining Tongued And Grooved, Including Wooden Plugs Complete With Necessary Screws And Priming Coat On Unexposed Surface. 12 Mm Thick , French Spirit Polishing : Two Or More Coats On New Works Including A Coat Of Wood Filler , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Flashings/ Aprons.( Upto 600 Mm) , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories Of Total Coated Thickness 0.50Mm (Base Metal Of Minimum 0.45Mm Thickness With Total Coating Thickness Of 0.05Mm) With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Gutter (600 Mm Over All Girth) , Manufacturing, Supplying And Fixing Retro Reflective Sign Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity Encapsulated Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iv Of Astm-D 4956-01 In Blue And Silver White Or Other Colour Combination Including Subject Matter, Message (Bi-Lingual), Symbols And Borders Etc. As Per Irc ; 67:2001, Pasted On Substrate By An Adhesive Backing Which Shall Be Activated By Applying Heat And Pressure Conforming To Class -2 Of Astm-D-4956-01 And Fixing The Same With Suitable Sized Aluminium Alloy Rivets @ 20 Cm C/C To Back Support Frame Of M.S. Angle Iron Of Size 25X25x3 Mm Along With Theft Resistant Measures, Mounted And Fixed With 2 Nos. M.S. Angles Of Size 35X35x5 Mm To A Vertical Post Made Up To M.S. Tee Section Ismt 50X50x6 Mm Welded With Base Plate Of Size 100X100x5 Mm At The Bottom End And Including Making Holes In Pipes, Angles Flats, Providing & Fixing M.S. Message Plate Of Required Size, Steel Work To Be Painted With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade And Of Approved Brand & Manufacture Over Priming Coat Of Zinc Chromate Yellow Primer (Vertical Ms-Tee Support To Be Painted In Black And White Colours).Backside Of Aluminium Sheet To Be Painted With Two Or More Coats Of Epoxy Paint Over And Including Appropriate Priming Coat Including All Leads And Lifts Etc. Complete As Per Drawing, Specification And Direction Of Engineer-In-Charge. 16.59.1 Mandatory/ Regulatory Sign Boards Of 900 Mm Diametre With Support Length Of 3750 Mm , Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. 2.6.1 All Kinds Of Soil , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum , Surface Dressing Of The Ground Including Removing Vegetation And In-Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M , Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone - Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth , Providing And Fixing Plain Lining With Necessary Screws/Nuts & Bolts/ Nails, Including A Coat Of Approved Primer On One Face, And Fixed On Wooden /Steel Frame Work, Complete As Per Direction Of Engineer-In- Charge (Frame Work Shall Be Paid For Separately). 12 Mm Thick Commercial Ply Conforming To Is : 1328 Bwr Type , Providing Fixing Thermal Insulation Of Ceiling (Under Deck Insulation) With Resin Bonded Fibre Glass Wool Conforming To Is : 8183, Density 24Kg / M3, 50Mm Thick, Wrapped In 200 G Virgin Polythene Bags, Fixed To Ceiling With Metallic Cleats (50X50x3 Mm) @ 60 Cm And Wire Mesh Of 12.5 Mm X 24 Gauge Wire Mesh, For Top Most Ceiling Of Building. , Providing And Fixing Of External Wall System On Light Gauge Steel Frame Work With Outer Face Cement Boards As Per Standard Sizes Fixed With Self-Drilling / Taping Screws / Fasteners @ 60 Cm C/C Of Approved Make. A Groove Of 2 Mm To 3 Mm Shall Be Maintained And Grooves Shall Be Sealed With Silicon Based Sealant. The Board Shall Be Fixed In A Staggered Pattern. Screws Shall Be Of Counter Sunk Rib Head Of 1.60 Mm To 4 Mm Thick Or 8 To 10 Gauge Of Length Varying From 25 To 45 Mm And. Internal Face 12.5 Mm Thick Gypsum Plaster Board Fixed On Cement Board As Per Standard Sizes Fixed With Self- Drilling / Taping Screws / Fasteners @ 60Cm C/C Of Approved Make, Proper Taping And Jointing To Be Done Using Fiber Mesh Tape And Epoxy And Acrylic Based Jointing Compound For Seamless Finish.(Cost Of Frame Work To Be Paid For Separately) Outer Face- Outer Face Having 6 Mm Thick Fiber Cement Board Type A, Category-Iv As Per Is:14862:2000 Fixed On 9 Mm Thick Fiber Cement Board, Type A, Category-Iv As Per Is:14862:2000 (High Pressure Steam Cured) Inner Face- 12.5 Mm Thick Gypsum Plaster Board Conforming To Is 2095:2011 Fixed On 8 Mm Thick Fibre Cement Board Of Type B, Category-Iii As Per Is:14862:2000 (High Pressure Steam Cured) , Providing And Fixing Internal Wall Panels On Light Gauge Steel Frame Work With 12.5 Mm Thick Gypsum Plaster Board Conforming Is 2095:2011 Fixed On Cement Board As Per Standard Sizes Fixed With Self-Drilling / Taping Screws / Fasteners @ 60 Cm C/C Of Approved Make, Screws Shall Be Of Counter Sunk Rib Head Of 1.60 Mm To 4 Mm Thick Or 8 To 10 Gauge Of Length Varying From 25 To 45 Mm. Proper Taping And Jointing To Be Done Using Fiber Mesh Tape And Epoxy And Acrylic Based Jointing Compound For Seamless Finish.(Cost Of Frame Work To Be Paid For Separately Cement Fiber Board 8 Mm Thick Of Type B, Category Iii As Per Is 14862:2000 (High Pressure Steam Cured) , Providing And Fixing In All Exterior Face Panels Breathable Vapour Barrier Underneath The Cement Fiber Board As Per National Building Code 2009 Complete As Per Direction Of Engineer-In-Charge. , Providing And Fixing M.S. Tubular Frames For Doors, Windows, Ventilators And Cupboard With Rectangular/ L-Type Sections, Made Of 1.60 Mm Thick M.S. Sheet, Joints Mitred, Welded And Grinded Finish, With Profiles Of Required Size, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 10.15.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size , Providing And Fixing Pressed Steel Door Frames Conforming To Is: 4351, Manufactured From Commercial Mild Steel Sheet Of 1.60 Mm Thickness, Including Hinges, Jamb, Lock Jamb, Bead And If Required Angle Threshold Of Mild Steel Angle Of Section 50X25 Mm, Or Base Ties Of 1.60 Mm, Pressed Mild Steel Welded Or Rigidly Fixed Together By Mechanical Means, Including M.S. Pressed Butt Hinges 2.5 Mm Thick With Mortar Guards, Lock Strikeplate And Shock Absorbers As Specified And Applying A Coat Of Approved Steel Primer After Pre-Treatment Of The Surface As Directed By Engineer In-Charge: Profile B Fixing With Carbon Steel Galvanised Dash Fastener Of Required Dia And Size (To Be Paid For Separately) , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding , Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete. With 12 Mm Mild Steel U Beading (Mosquito Jali). , Providing & Fixing Glass Panes With Putty And Glazing Clips In Steel Doors, Windows, Clerestory Windows, All Complete With : 10.30.1 4.0 Mm Thick Glass Panes , Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 125 Mm , Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 250X10 Mm , Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete (Copper Oxidised As Per Is 1378) - 300X16 Mm , Providing And Fixing Isi Marked 85X42 Mm Oxidised M.S. Pull Bolt Lock Conforming To Is : 7534 With Necessary Screws Bolts, Nut And Washers Etc. Complete (Copper Oxidised As Per Is 1378). , Providing And Fixing Aluminium Hanging Floor Door Stopper Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour And Shade With Necessary Screws Etc. Complete. Single Rubber Stopper , Providing And Fixing Ptmt Door Catcher Of Length 72 Mm And Dia. Of 42 Mm With Suitable Washers Weighing Not Less Than 33 Gms , Providing And Laying Vitrified Tiles In Floor With Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand & Manufacturer, In All Colours And Shade, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer), With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Brand & Manufacturer, In All Colours And Shade, In Skirting, Riser Of Steps, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is: 15477, In Average 6 Mm Thickness, Including Grouting Of Joints (Payment For Grouting Of Joints To Be Made Separately). Size Of Tile 600X600 Mm , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Excavating, Supplying, Stacking And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Foundation Trenches, Plinth, Sides Of Foundation Etc. Complete For All Lift. , Supplying And Filling Of Earth By Mechanical Transport Including Loading, Unloading & Stacking Beyond 5Km Upto 10Km & Beyond 10Km Upto 20Km (Including All) , Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete. Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. All Works Above Plinth Level Upto Floor V Level. Concrete Of M30 Grade With Minimum Cement Content Of 350 Kg /Cum , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For :Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Extra For Providing And Placing In Position 2 Nos 6Mm Dia. M.S. Bars At Every Third Course Of Half Brick Masonry , 12 Mm Cement Plaster Of Mix: 1:6 (1 Cement: 6 Fine Sand) - Inner Plaster , Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screw , Providing And Fixing Factory Made Isi Marked Steel Glazed Doors, Windows And Ventilators, Side /Top /Centre Hung, With Beading And All Members Such As F7d,F4b, K11 B And K12 B Etc. Complete Of Standard Rolled Steel Sections, Joints Mitred And Flash Butt Welded And Sash Bars Tenoned And Riveted, Including Providing And Fixing Of Hinges, Pivots, Including Riming Coat Of Approved Steel Primer, But Excluding The Cost Of Other Fittings, Complete All As Per Approved Design, (Sectional Weight Of Only Steel Members Shall Be Measured For Payment). 10.11.1 Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10x10 Cm Of cement concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size , Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 (Thickness To Be Specified By The Manufacturer), Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete , Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In All Colours, Shades, Except White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sq.M Including Pointing The Joints With White Cement And Matching Pigments Etc., Complete. , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sq M Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sq M) , Providing And Laying Water Proofing Treatment In Sunken Portion Of Wcs, Bathroom Etc., By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying : (A) First Layer Of Slurry Of Cement @ 0.488 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.253 Kg/ Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours. (B) Second Layer Of Slurry Of Cement @ 0.242 Kg/Sqm Mixed With Water Proofing Cement Compound @ 0.126 Kg/Sqm. This Layer Will Be Allowed To Air Cure For 4 Hours Followed With Water Curing For 48 Hours. The Rate Includes Preparation Of Surface, Treatment And Sealing Of All Joints, Corners, Junctions Of Pipes And Masonry With Polymer Mixed Slurry. , Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To Reinforced Cement Concrete Projections.
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 3
Uttarakhand View Result →
9.
Health and Family Welfare #11427982 Technical Bid
Tender for E-Tender For Purchase Of Mediciens, Dental Materials, Consumables, Lab Items, Ortho Implants & Other Items For Districit Health Facilities, District Charkhi Dadri. , 5-Fluorouracil Injection 500Mg, 50Mg/Ml Ampule , Acebrophylline 200 Mg Tablet , Aceclofenac Tablet 100 Mg , Acetazolamide Tablet 250 Mg , Acetylcysteine 600Mg Tablet , Acetylcysteine20% W/V, 2Ml Injection , Acetylsalicylic Acid Tablet 150 Mg , Acetylsalicylic Acid Tablet 75 Mg Gastroresistant Entric Coated , Actinomycin Injection 0.5 Mg , Acyclovir Eye Oint 5%,5 Gm , Acyclovir Ointment 3% W/W, 4.5Gm , Acyclovir Tablet 200 Mg , Acyclovir Tablet 400 Mg , Acyclovir Tablet 800 Mg , Adapalene Gel, 0.1%, 15Gm , Adenosine Injection 3 Mg/ Ml, 1Ml annual periodical maintenance , Adrenaline Injection 1 Mg/Ml, 1:1000, 1 Ml annual periodical maintenance , Agomelatine Tab 25 Mg , Albendazole Chewable Tablet 400 Mg , Albendazole Oral Suspension 200 Mg/5 Ml,10 Ml Bottle , Alfacalcidol Soft Gelatin Capsule 0.25 Mcg , Alkalizer Mb6 500Ml (Potassium Citrate Magnisum Citrate Syrup & Vit B6) , Allopurinol Tablet 100 Mg , Alprazolam Tablet 0.25 Mg , Alprazolam Tablet 0.5 Mg , Aluminium Hydroxide + Magnesium Hydroxide + Simethicone Oral Solution 250 Mg+ 250 Mg+ 50 Mg/ 5 Ml, 180 Ml Bottle , Aluminium Hydroxide + Magnesium Hydroxide + Simethicone+ Magnesium Carbonate Chewable Tablet 240 Mg+100 Mg+ 25 Mg + 60 Mg , Amidarone 150 Mg/3 Ml Injection , Amikacin Injection 100Mg, 2 Ml , Amikacin Injection 250Mg, 2 Ml , Amikacin Injection 50 Mg, 2 Ml , Amikacin Injection 500Mg, 2Ml , Amino Acids/Alamin 200 Ml Infusion Iv Minimum 10 Essential Amino Acids , Aminophylline Injection 25 Mg/ Ml, 10 Ml Ampoule , Amiodarone 100 Mg Tablet , Amiodarone 200 Mg Tablet , Amisulpride 100 Mg Tablet , Amisulpride 200 Mg Tablet , Amisulpride 50 Mg Tablet , Amitriptyline Tablet 10 Mg , Amitriptyline Tablet 25 Mg , Amlodipine Tablet 10 Mg , Amlodipine Tablet 5 Mg , Amoxicillin + Clavulanic Acid Injection 1.2 Gm , 10 Ml Vial With Diluents , Amoxicillin + Clavulanic Acid Injection 250 Mg +50 Mg, Vial With Diluents , Amoxicillin + Clavulanic Acid Suspension 200 Mg +28.5 Mg/ 5 Ml, 60 Ml Bottle , Amoxicillin + Pottasium Clavulanate Dispersible Tablet 200 Mg +28.5 Mg , Amoxicillin + Pottasium Clavulanate Tablet 500 Mg + 125 Mg , Amoxicillin Capsule 250 Mg , Amoxicillin Oral Suspension 125 Mg/5 Ml, 60 Ml Bottle , Amphotericin B Powder For Injection 50 Mg And Vial Has Sodium Deoxychlolate Or Liposomal Complex, 10 Ml , Ampicillin Sodium Injection 500Mg/2 Ml Vial With Diluent , Anti Hemophillic Factor Ix Vial Injection Size 500 Iu , Anti Hemophillic Factor Vii Injection 1Mg,Vial/Ampoule , Anti Hemophillic Factor Vii Injection 2Mg,Vial/Ampole , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 1000 Iu,Vial/Ampoule , Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 500 Iu,Vial/Ampoule , Anti Rabies Immunoglobulin Injection (Human) 150 Iu/Ml, 2Ml Vial , Anti Rabies Immunoglobulin Injection 300Iu/Ml , Anti Rabies Vaccine Human (Cell Culture) Purified Vero Cell Rabies Vaccine 1 Ml Vial, (For Intradermal Use) , Anti Rabies Vaccine Injection 2.5 Iu, Singledose , Anti-Haemorrhoidal Containing: Beclomethasone Dipropionate 0.025% W/W, Phenylephrine Hyderochloride 0.10% W/W, Lignocaine Hydrochloride 2.5% W/W In Soft Paraffin Base 20 Gm Tube , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 150 Mcg/Vial , Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 300Mcg/Vial , Antisnake Venom ( Dry Powder For Polyvalent Solution) Injection Vial With 10 Ml Diluent , Antisnake Venom (Polyvalent Solution) Injection 10 Ml , Aprepitant 80Mg (Kit Contains 3 Caps) , Aripipralzole Tablet 10 Mg , Aripiprazole Tablet 20 Mg , Aripiprazole Tablet 5 Mg , Arkamin 0.1 Mg Tablet , Artemether (40Mg) + Lumefantrine (240Mg) Tablet , Artemether (80Mg) + Lumefantrine (480Mg) Tablet , Artesunate 100 Mg+Pyrimethamine 37.5 Mg+Sulphadoxin 750 Mg Tab. , Artesunate 50 Mg+Pyrimethamine 25 Mg+Sulphadoxin 500 Mg Tab. , Artesunate 200 Mg+Pyrimethamine 25 Mg+Sulphadoxin 500 Mg Tab. , Artesunate Injection 60 Mg/Ml , Ascorbic Acid Tablet 500 Mg (Vitamin - C) , Ascorbic Acid Tablet 500 Mg + Zinc Sulphate 20Mg , Atenolol Tablet 50 Mg , Ateplase Inj. 20 Mg , Ateplase Inj. 50Mg , Atomoxetine Capsule 10 Mg , Atorvastatin Tablet 10 Mg , Atorvastatin Tablet 20 Mg , Atracurium Besylate Injection 10 Mg/ Ml, 2.5 Ml , Atropine Eye Drops 1% W/V, 5 Ml , Atropine Eye Ointment 1%, 3.5 Gm , Atropine Injection 0.6 Mg/Ml, 1 Ml Ampoule , Azathioprine 25 Mg Tablet , Azithromycin 1Gm Inj. , Azithromycin 500 Mg Inj. , Azithromycin Oral Solution 200 Mg/5 Ml, 15 Ml , Azithromycin Tablet 250 Mg , Azithromycin Tablet 500 Mg , Azitronam 250Mg , B-Complex Tablet , Beclofen Tablet 20 Mg , Benzathine Penicillin Injection (Powder )12 Lacs Iu Vial, 5 Ml , Benzoyl Per Oxide Gel 2.5%, 20 Gm , Benzyl Nicotinate(2 Mg) + Heparin(50 Iu) 20Gm Ointment (Tharomophob Cream) , Betahistine Tablet 8 Mg , Betamethasone Dipropionate Cream 0.1 %, 5 Gm , Betamethasone Injection 4Mg/Ml , Bethanecholchloride Tablet 25 Mg , Bicalutamide Tablet 50 Mg , Biotin Tablet 10 Mg , Biphasic Isophane Insulin (30/70) 40 I.U/Ml, 10 Ml , Bisacodyl Tablet 5 Mg , Bisprolol 5Mg Tablet , Bleomycin Injection 15 Mg, 15 Mg/Ml Vial , Blonanserin Tablet 4 Mg , Bone Marrow Needle For Neonates 18 G , Bortezomib Injection 2 Mg , Breviteracetam Tablet 50 Mg , Bromocriptine Tablet 2.5 Mg , Budesonide (A)+ Formoterol (B) Inhalation (Mdi/Dpi) 200 Mcg (A)+ 6 Mcg (B), 120 Mdi , Budesonide Inhalation (Mdi/Dpi) 200 Mcg/Dose, 200 Mdi , Budesonide Nasal Spray 100 Mcg/Dose, 7.5 Ml , Budesonide Respirator Solution For Use In Nebulizer 1 Mg/ Ml, 2Ml , Budesonide Respules 3%, 4Ml , Bupivacaine Heavy 5 Mg With Dextrose Monohydrate 80 Mg/Ml Injection 4 Ml Ampoule , Bupivacaine Injection 0.5%, 5Ml Amp. , Buprenorphine Tablet 0.4 Mg , Buprenorphine Tablet 2 Mg , Buprenorphine Transdermal Patch 10 Mcg/Hour , Buprenorphine Transdermal Patch 20 Mcg/Hour , Buprinorphine Patch 10 Mg , Buprinorphine Patch 15 Mg , Buprinorphine Patch 5 Mg , Bupropion Tablet 150 Mg , Buspirone 5 Mg Tablet , Butorphanol Tartrate 1Mg/Ml, 1 Ml Injection , Cabergolin 0.25 Mg Tab , Cabergolin 0.50 Mg Tab , Caffeine Citrate 20Mg/Ml Oral Solution , Caffeine Citrate Injection 20 Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml), 3Ml , Calamine Lotion, 100 Ml , Calcium Gluconate Injection 100 Mg/Ml, 10 Ml annual periodical maintenance , Calcium Phosphate Syrup, 200Ml , Calcium Salts 500 Mg+ Vitamin D3 250 Iu Tablet , Calcium Syrup Each 5 Ml Contains Calcium 250Mg, Vitamin D3 125 Iu , Capecitabine Tablet 1000 Mg , Capecitabine Tablet 500 Mg , Carbamazepine Oral Solution 100Mg/5Ml, 30 Ml Bottle , Carbamazepine Tablet 200 Mg , Carbamazepine Tablet 400 Mg , Carbimazole Tablet 5 Mg , Carbimiazole 10 Mg Tablet , Carboplatin Injection 150 Mg, 10 Mg/Ml Vial , Carboplatin Injection 450 Mg, 10Mg/Ml Vial , Carboprost Injection 25 Mg/Ml , 250 Mcg, 1Ml , Carfilzomib Injection 60 Mg , Cariprazine Tablet 1.5 Mg , Carpinol Inj. 0.5% , Carvedilol 3.125 Mg Tablet , Cefadroxil Oral Solution 125 Mg/ 5 Ml, 30 Ml , Cefepime 2 Gm + Tazobactom 250Mg Inj. , Cefixime 100 Mg Tablet , Cefixime Syrup 50 Mg/ 5 Ml, 30 Ml , Cefixime Tablet 200 Mg , Cefoperazone + Sulbactam (1G+1G) Injection , Cefotaxime Injection 1 Gm , Cefotaxime Injection 250 Mg , Cefotaxime Injection 500 Mg , Ceftazidime 1 Gm Injection , Ceftazidime 250Mg , Ceftriaxone + Salbuctam Injection (1Gm + 0.5Gm) , Ceftriaxone Injection 1 G Vial , Ceftriaxone Injection 250 Mg , Cetrimide Solution 20% concrete For Dilution 500Ml , Cetrizine Hydrochloride 10 Mg Tablet , Cetrizine Syrup 5 Mg/5Ml, 60 Ml , Chlordiazepoxide 10 Mg Tablet , Chlordiazepoxide 25 Mg Tablet , Chlorhexidine Mouth Wash Solution 100 Ml, 0.2% W/V , Chlorhexidine Solution 5% concrete For Dilution 5 Ltr , Chlorhexidine Solution 5% concrete For Dilution 500Ml , Chloroquine Phosphate Injection 40 Mg/Ml , Chloroquine Phosphate Oral Solution 50 Mg/ 5 Ml, 50Ml Bottle , Chloroquine Phosphate Tablet 250 Mg Equivalent To 155Mg Chloroquine Base , Chlorpheniramine Tablet 4 Mg , Chlorpromazine (Hydrochloride) Tablet 100 Mg , Chlorthlidone 12.5 Mg Tablet , Chlorthlidone 6.25Mg Tablet , Chymotrypsin+ Trypsin (1:6 ) Tablet 100K Au , Cilnidipine 10Mg Tablet , Cinnarizine Tablet 25 Mg , Ciprofloxacin (0.3% W/V) + Dexamethasone (0.1% W/V) Ear Drops, 10 Ml , Ciprofloxacin Eye Drop 0.3%, 10Ml , Ciprofloxacin Eye Ointment 0.3%, 5 Gm , Ciprofloxacin Injection Iv 2Mg/ Ml, 100 Ml , Ciprofloxacin Tablet 250 Mg , Ciprofloxacin Tablet 500 Mg , Cisplatin Injection 10 Mg , Cisplatin Injection 50 Mg, 1 Mg/Ml Vial , Citicoline Tablet 500 Mg , Clarithromycin 500 Mg Tablet , Clindamycin Gel 1% W/W, 10 Gm , Clinidipine Tablet 10 Mg , Clobazam Capsule 10 Mg , Clobetasol + Gentamycin Ointment 0.05% + 0.1 %, 15 Gm , Clobetasol + Salicylic Acid Cream 20 Gm , Clobetasol Cream 10Gm (0.05%) , Clobetasol+Saliyltic Acid Cream 10Gm , Clobetasone Butyrate + Miconazole Cream , Clofazimine 100 Mg Tablet , Clofazimine 50 Mg Tablet , Clomifene Citrate Tablet 50 Mg , Clonazepam 0.25 Mg Tablet , Clonazepam Tablet 0.5 Mg , Clonazepam Tablet 1 Mg , Clonidine 0.1 Mg Tablet , Clonidine 100Mcg Tab. , Clopidogrel Tablet 75 Mg , Clotrimazole +Beclomethasone 10Gm Cream , Clotrimazole 1% W/V + Lignocaine Hydrochloride 2% W/V Ear Drops, 5Ml , Clotrimazole Cream 2 %, 15Gm , Clotrimazole Ear Drops 1% W/V, 5Ml , Clotrimazole Mouth Paint 1% W/V, 15 Ml , Clotrimazole Pessaries 200 Mg , Clotrimazole200mg + Clindamycin 100 Mg Pessaries , Clotrimazole Powder 75 Gm , Cloxacillin Capsule 500 Mg , Clozapine 100 Mg Tablet , Clozapine 25 Mg Tablet , Clozapine 50 Mg Tablet , Coal Tar Solution 5%, 100Ml , Coconut Oil 100Ml , Codeine Phosphate 10Mg +C.P.M. 4Mg Per 5Ml,100Ml , Colistin Lyophilized Powder 4.5 Million I U Per Vial Injection , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , Colostrum 500Mg Cap. , Combination Of Clinidine Bromide 2.5 Mg +Chlordiazepoxide 5.0 Mg+Dicyclomine 10.0 Mg (Normaxin Equivalent) Tablet , Conjugated Estrogen Tablet 0.625Mg , Cotrimazole 1 % + Betamethasone 0.0025% Lotion 15 Ml , Cotrimoxazole (Sulfamethoxazole + Trimethoprim) Tablet 800 Mg + 160 Mg , Co-Trimoxazole [Sulphamethoxazole (A) + Trimethoprim (B)] Oral Liquid 200 Mg (A) + 40 Mg (B)/5 Ml , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg, 100 Ml , Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg, 60 Ml , Cough Syrup Ambroxol-15 Mg + Terbutaline Sulphate-1.5 Mg + Guaiphenesin-50 Mg/ 5 Ml 100 Ml , Cough Syrup Diphehydramine 14 Mg + Ammonium Chloride 135 Mg + Sodium Citrate 57 Mg + Menthol 0.9 Mg/5 Ml 100 Ml Bottle , Crotamiton Cream 20Gm , Cycloserine 250 Mg. Tablet , Cycloserine 500 Mg. Tablet , Cyclopentolate Hcl Eye Drops 1% W/V , 5Ml , Cyclophosphamide Injection 1000Mg, 1.33Mg/Ml Vial , Cyclophosphamide Injection 500Mg, 10Mg/Ml Vial , Cyclophosphamide Tablet 50 Mg , Cyproheptadine Tablet 4 Mg , Dacarbazine Injection 200 Mg, 10Mg/Ml Vial , Dacarbazine Injection 500 Mg , Daclatasvir 30 Mg Tablet , Daclatasvir 60 Mg Tablet , Darifenacin Tablet 7.5 Mg , Deferasirox Tablet 500 Mg , Deferasirox Tablet 250 Mg , Deferiprone Tablet 500 Mg , Deferoxamine Mesylate 2 Grams Per Injection , Degaralix Injection 240 Mg , Desferrioxamine Injection 500 Mg , Desvenlafaxine Tablet 50 Mg , Dexamethasone 6 Mg Tablet(Covid) 6 Mg , Dexamethasone Injection 4Mg/Ml, 2 Ml Ampoule , Dexamethasone Tablet 0.5 Mg , Dexamethasone Tablet 4 Mg , Dexamethasone Tablet 8 Mg , Diacerein 50 Mg + Glucosamine Sulphate 500 Mg Tablet , Diazepam Injection 5 Mg/Ml, 2 Ml Ampoule , Diclofenac (Sodium) Injection 25 Mg/Ml ,3Ml Amp. , Diclofenac + Paracetamol Tablet 50Mg+325Mg , Diclofenac 50Mg + Chlorzoxazone500mg + Paracetamol 250 Mg Tablet , Diclofenac Gel 1%, 30 Gm Tube , Diclofenac Injection 75 Mg/Ml ,1Ml Amp. (Intravenous) , Diclofenac Sodium Gastro-Resistant Tablet 50 Mg , Diclofenac Supositories 50 Mg , Diclofenac Spray 30Ml , Diclofenac Spray 100Ml , Dicyclomine 10 Mg+Mefenamic Acid 250 Mg Tablet , Dicyclomine 20 Mg+Mefenamic Acid 500 Mg Tablet , Dicyclomine Injection 2 Ml Ampule , Dicyclomine Oral Solution 10Mg/5Ml , Dicyclomine Tablet 10 Mg , Dienogest Tablet 2 Mg , Digestive Enzymes Capsule , Digoxin Tablet 0.25 Mg , Diltiazem Injection 5 Mg/Ml, 5Ml , Diltiazem Tablet 30 Mg , Dinoprostone Gel 0.5 Mg, 3 Gm , Disodium Hydrogen Citrate Oral Solution 1.38 Gm/ 5 Ml, 100 Ml , Distilled Water/Sterile Water 10Ml. , Distilled Water/Sterile Water 5Ml , Disulfiram Tablet 250 Mg , Disulfiram Tablet 500 Mg , Divalproex Sodium Tablet 500 Mg , Dns ( Sodium Chloride And Dextrose, Each 100 Ml Contains Dextrose 5 Gm, Nacl 0.9 G) 500Ml (Ffs Techonology) , Dobutamine Injection 250 Mg/5 Ml , Docitaxel Injection 120 Mg, 20Mg/ 0.5 Ml Vial , Dolutegravir Tablet 50 Mg , Domperidone Oral Solution 1 Mg/ Ml, 30Ml , Domperidone Tablet 10 Mg , Donepezil Injection 10 Mg , Donepezil Tablet 10 Mg , Donepezil Tablet 5 Mg , Dopamine Injection 40 Mg/ Ml In 5Ml Ampoule , Dothiepin Tablet 25 Mg , Dothiepin Tablet 75 Mg , Doxophylline 400 Mg Tablet , Doxorubicin Injection 10 Mg, 10Mg/Ml Vial , Doxorubicin Injection 50 Mg, 10Mg/Ml Vial , Doxycycline Capsules 100 Mg , Doxylamine Tablet 10 Mg , Drotaverine 40 Mg Tablet , Drotaverine 80 Mg + Mefenimic Acid 500 Mg Tablet , Drotaverine Injection 40 Mg/ 2 Ml , Drotaverine Tablet 80 Mg , Duloxetine Capsule 20 Mg , Duloxetine Tablet 30 Mg , Ecg Jelly 200 Ml Bottle , Elemental Iron 60 Mg +Folic Acid 500 Mcg, Sugar Coated And Red Color Tablet , Empagliflozin Tablet 10 Mg , Enema , Enoxaparin 40 Mg Inj. , Enoxaparin 60 Mg Inj. , Entacavir 0.5 Mg Tablet , Entecavir 1 Mg Tablet , Epirubicin Injection 10 Mg, 2Mg/Ml Vial , Epirubicin Injection 50 Mg, 2Mg/Ml Vial , Erlotinib Tablet 100 Mg , Erythromycin Syrup 125 Mg/5 Ml, 60 Ml , Erythromycin Tablet 250 Mg , Erythropoietin Injection 40000 Units/Ml, Single Dose 1 Ml Vial , Escitalopram Tablet 10 Mg , Estrogens Cream 0.625 Mg , Ethambutol Tablet 100 Mg , Ethambutol Tablet 400 Mg , Ethambutol Tablet 800 Mg , Ethamsylate Injection 250 Mg/2 Ml , Ethamsylate Tablet 250 Mg , Ethamsylate Tablet 500 Mg , Ethionamide 250 Mg Tablet , Ethionamide 500 Mg Tablet , Ethinyestradiol Tablet 5 Mcg , Etizolam Tablet 0.50 Mg , Etophylline + Theophylline Injection 169.4 Mg + 56.6 Mg/2 Ml , Etophylline + Theophylline Tablet 231 Mg + 69 Mg (Sr) , Etoposide Capsule 50 Mg , Etoposide Injection 100Mg, 20Mg/Ml Vial , Etoricoxib Tablet 90 Mg , Exemestene Tablet 1 Mg , Favipiravir(Covid) 400 Mg , Febuxostat 40 Mg Tablet , Fentanyl Injection 50 Mcg/Ml, 2Ml Ampoule , Ferrous (Iron Sucrose) Injection 20 Mg/Ml, 5 Ml Amp. , Ferrous Salt + Folic Acid(Ifa Wifs) Tablet(Enteric Coated) Equivalent To 100 Mg Iron + 500 Mcg Folic Acid (Blue) , Ferrous Sulpahte + Folic Acid Syrup 100 Mg + 0.5 Mg/ 5 Ml, 50 Ml Bottle, Ropp Cap Bottle With Inert Liner & Bottle To Be Provided With A Dispenser To Dispense To 1 Ml Each Time And Packed In A Mono Carton , Fevipiravir 200Mg Tablet , Fexofenadine 120 Mg Tablet , Fexofenadine 180 Mg Tablet , Filgrastim Injection 300Mcg, 300Mcg/0.5 Ml Prefilled Syringe , 3 Fdc Tablet (Each Film Cated Tablet Contains Rifampicin 150 Mg+ Isoniazid 75 Mg+ Ethambutol 275 Mg) Fixed Dose Combination For Tb , 4 Fdc Tablet (Each Film Cated Tablet Contains Rifampicin 150 Mg+ Isoniazid 75 Mg+ Ethambutol 275 Mg + Pyrazinamide 400Mg) Fixed Dose Combination For Tb , Flouromethalone 0.1% W/V Eye Drops 5Ml , Fluconazole Capsule/Tablet 150 Mg , Fluconazole Capsule/Tablet 200 Mg , Fluconazole Injection 200 Mg/ 100 Ml , Flunarazine Tablet 10 Mg , Fluoxetine Capsule 20 Mg , Fluphenazine Injection 25 Mg, 1 Ml Ampoule , Flurbiprofen Sod. Eye Drops 0.03%W/V ,10Ml , Fluticasone Cream 0.01%, 10Gm , Fluticasone Furoate Nasal Spray , Fluvoxamine 150 Mg Tablet , Folic Acid Tablet 5Mg , Formaldehyde Solution 400Ml , Formalin Tablet , Formocresol Formalin, Cresol Glycerin ,Formocresol Formalin Bp 20% V/V , Cresol Ip 32% V/V , Glycerin Ip Qs, 20Ml , Framycetin Cream 1%, 30 Gm Tube , Furosemide Injection 10 Mg/Ml, 2Ml Ampoule , Furosemide Tablet 40 Mg , Fusidic Acid Cream 2 %, 10 Gm , Gabapentin + Nortriptyline (400/10Mg) Tablet , Geftinib Tablet 250 Mg , Gemcitabine Injection 200Mg, 100Mg/Ml Vial , Gentamycin Injection 40 Mg/ Ml, 2 Ml Vial , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 50 Ml Dark Bottle , Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 15 Ml Dark Bottle , Glimipride Tablet 1 Mg , Glimipride Tablet 2 Mg , Glucose With Sodium Chloride/Saline Injection 5% Glucose + 0.9% Sodium Chloride, 500Ml (Ffs Technology) , Glucose/Dextrose Injection 10% Isotonic 500 Ml(Ffs Technology) , Glucose/Dextrose Injection 25%, 100 Ml(Ffs Technology) , Glucose/Dextrose Injection 5% Isotonic 500 Ml(Ffs Technology) , Glycerine Trinitrate Injection (Nitro Glycerine) 5 Mg/ Ml , Glyceryl Trinitrate ( Niroglycerine) Injection 5 Mg/Ml, 5 Ml Ampule , Glyceryl Trinitrate (Sublingual) Tablet 500 Micrograms , Glycopyrolate Injection 0.2 Mg/Ml, 1 Ml Ampoule , Glycopyrronium +Formoterol Fumarate Rota Caps , Goserline Injection 10.8 Mg , Granisetron Injection 1 Mg , Granisetron Injection 3 Mg , Griseofulvin Tablet 250 Mg , Haloperidol Injection 5 Mg/ Ml , Haloperidol Injection Long Acting 50 Mg , Haloperidol Tablet 5 Mg , Halothane Inhalation 250 Ml Bottle , Hcg (2000 Iu) Inj. , Hcg (5000 Iu) Inj. , Heparin Injection (5000 Iu/Ml) 5Ml, 1% , Hepatitis B Immunoglobulin Injection 100 Iu/ 1Ml. , Hepatitis B Vaccine (R Dna) I.P. 0.5Ml Inj, 10Mcg/0.5Ml , Hepatitis B Vaccine (R Dna) I.P. 0.5Ml Inj, 5Mcg/0.5Ml , Homatropine Eye Drops 1%, 5Ml , Homatropine Eye Drops 2%, 5Ml , Human Albumin 20% Sol. Ip, 100Ml For I/V Use , Hyaluronidase Injection 1500 Iu/Ml , Hyaluronidase Injection 1500 Iu/Ml (Appasamy) , Hydrochlorothizide 12.5 Mg Tablet , Hydrocortisone ( Sodium Sucinate Powder) Injection 100 Mg Vial, With 2 Ml Distilled Water For Reconstitution , Hydrogen Peroxide Solution 6%, 400 Ml Bottle , Hydroprogesterone 250 Mg Inj. , Hydroprogesterone 500 Mg Inj. , Hydroquinone 2%/4% + Tretinoin 0.025 % +Fluocinolone Skin Cream, 15 Gm Tube , Hydroquinone 2.0% W/W + Tretinoin 0.025% W/W + Mometasone Furoate 0.1% W/W In A Cream Base Q.S, 15 Gm Tube , Hydroquinone 20Gm Cream , Hydroxy Urea Cap 500Mg , Hydroxychloroquine 200 Mg Tablet , Hydroxychloroquine 400 Mg Tablet , Hydroxycobalamin Injection 1 Mg/ Ml , Hydroxypropyl Mehtylcellulose Injection 2 %, 5Ml , Hydroxypropyl Mehtylcellulose Injection 2 %, 5Ml (Appasamy) , Hydroxyzine Tablet 10 Mg , Hynidase / Omnidase Inj., 1500 Iu, Dry Vial Of Powder Not For Iv Use , Hyoscine Butyl Bromide Injection 20 Mg/ Ml , Hyoscine Butyl Bromide Tablet 10 Mg , Ibuprofen Oral Solution 100 Mg/5 Ml. 60 Ml Bottle , Ibuprofen Tablet 200Mg , Ibuprofen Tablet 400 Mg , Ibuprofen Tablet 400 Mg +Paracetamol 325 Mg Tablet , Ichthammol Glycerine Solution 10 Ml Vial , Imatinib Tablet 400 Mg , Imipenem And Cilastatin Injection (500 Mg+500 Mg) , Imipenem Injection 500Mg , Imipramine 75 Mg Tablet , Imipramine Tablet 25 Mg , Indomethacin 25 Mg Tab , Insulin (Soluble) Injection 40 Iu/Ml In 10 Ml Vial , Intracameral Lignocaine 1% 2Ml Inj , Intracameral Moxifloxacin Inj. (Opthalmic Sol.) , Intracameral Phenylephrine 0.5Ml Solution For Pupil Cataract Surgery , Intravenous Immunoglobulin(Ivig) 10 Gm,100 Ml Bottle , Iohexol Injection 300 Mg , Ipratropium Respirator Solution For Use In Nebulizer 250Mcg/ 1Ml, 2Ml , Iron And Folic Acid Tablet ( Wifs Junior ) Containing Dried Ferrous Sulphate Ip Equivalent To Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet. Tablet Are Sugar Coated And Pink Coloured Tablets With Only Edible Colours Used Tablet Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet , Iron Sucrose 100 Mg/Ferric Carboxymaltose Ml , 10 Ml Inj. , Isoflurane Inhalation 100 Ml Vial , Isoniazid Tablet 100Mg , Isoniazid Tablet 300Mg , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Isophosphamide Injection 200Mg, 100Mg/Ml Vial , Isosorbide Dinitrate Tablet (Sublingual) 5 Mg , Isosorbide Mononitrate Tablet 20 Mg (Xr) , Isosorbide Mononitrate Tablet 30 Mg (Sr) , Isotretinoin Capsule 20 Mg , Isoxsuprine Injection 5 Mg/ Ml, 2Ml , Isoxsuprine Tablet 10 Mg , Ispaghula Granules/ Husk/ Powder Sachet 3.5 Gm , Ispaghula Granules/ Husk/ Powder 100Gm. Gm , Itraconazole 100 Mg Tablet , Itraconazole 200 Mg Tablet , Ivermectin Tablet 12 Mg , Ivermectin Tablet 6 Mg , Ketaconazole Lotion 2% W/V, 50 Ml , Ketamine (As Hydrochloride) Injection 50 Mg /Ml,10 Ml Vial , Ketoconazole 200 Mg Tablet , Ketoconazole Sampoo 100Ml , Kojic Acid Cream 2 %, 15Gm , Labetalol Injection 20 Mg, 5Mg/Ml, 4 Ml Amopule , Labetalol Tablet 100 Mg , Lacosamide Tablet 100 Mg , Lactulose Solution 10 Mg/15 Ml, 60Ml , Lantus Insulin (Insulin Glargine 100 Units/Ml) , Latanoprost Ear Drops 0.005 % W/V, 5 Ml , Lenalidomide Tablet 10 Mg , Letrozole Tablet 2.5 Mg , Leucovorin Injection 50 Mg/5Ml , Levamasole Tablet 150 Mg , Levamasole Tablet 50 Mg , Levetiracetam Tablet 500 Mg , Levitiracetam Oral Solution 500Mg/5Ml, 100Ml , Levitracetam 500Mg/5Ml Inj., 5Ml Inj , Levocetrizine 5Mg + Montekulast 10 Mg Tablet , Levocetrizine Tablet 5 Mg , Levodopa + Carbidopa Tablet 100 Mg + 10 Mg , Levodopa Tablet 100Mg , Levofloxacin Eye Drop 5Ml , Levofloxacin Tablet 250Mg , Levofloxacin Tablet 500 Mg , Levosalbutamol (0.63Mg) Respules 2.5Ml , Levosalbutamol 1.25Mg + Ipratropium, 500Mcg, Respules , Levosulpride (Sr) 75 Mg + Rabeprazole (Ec) 20 Mg Capsule , Levothyroxine 100 Mcg Tablet , Lidocaine (2% W/V) + Clotrimazole 1% W/V + Beclomethasone 0.025% W/V + Ofloxacin (0.3% W/V) 5Ml Ear Drops , Lidocaine 10% Spray, 50Ml , Lidocaine 30Ml Inj. , Lidocaine Topical Spray (15% W/W), 100 Ml , Lignocaine 1% Ointment, 30Gm , Lignocaine 4% Spray Topical Solution 30Ml , Lignocaine Hydrochloride And Adrenaline Bitartarate Injection 20Mg/Ml And 0.01Mg/Ml Adrenaline, 30 Ml Vial , Lignocaine Injection 2%, 30 Ml Vial , Lignocaine Jelly 2% W/V ( With Seprate Nosal), 30Gm Tube , Linezolid Inj. 600Mg , Linezolid Tablet 600 Mg , Lithium Carbonate Tablet 300 Mg , Lithium Tablet special repair 400 Mg , Lmw Heparin Injection 60Mg/0.6Ml For Sc Use Prefilled Syringe , Loperamide 2Mg Tab. , Lorazepam Injection 4Mg, 2Ml , Lorazepam Tablet 1 Mg , Lorazepam Tablet 2 Mg , Losartan + Hydrochlorothiazide Tablet (50 Mg + 12.5 Mg) , Luliconazole Cream 1 % W/W, 30 Gm , Luperolide Acetate Injection 22.5 Mg , Magnesium Sulphate + Sullfacetamide (Sumag ) 75Gm Ointment , Magnesium Sulphate 58%, Urea 1%, Sulphacetamide Sodium 2.5%, Proflavine 0.1% (In Glycerine Base) Ointment 75Gm , Magnesium Sulphate Injection 1 Gm /2Ml (50%W/V), 2 Ml Ampoule , Magnesium Sulphate Injection 2.5 Gm /5Ml(50%W/V), 5 Ml Ampoule , Magnesium Sulphate Injection 500Mg/Ml,1 Ml Ampoule , Malathion 50% Ec, 1 Ltr , Malathion Technical 95%, 25 Kg , Mannitol Injectable Solution 20 %,100 Ml (Ffs Technology) , Mdi-Formoterol+Budesonide Inhaler , Medroxyprogesterone Acetate Injection Ip (Dmpa ) 25 X 1X 1Ml (Contraceptive Injection For Im Use Only) , Medroxyprogesterone Tablet 10 Mg , Melatonin Tablet 3 Mg , Memantine Tablet 5 Mg , Mephentermine Injection 30 Mg/Ml, 10 Ml Amp. , Meropenum Injection 125 Mg , Meropenum Injection 250 Mg , Meropenum Injection 500 Mg , Mesalamine 800 Mg Tablet , Mesna Injection 400 Mg , Metformin special repair 1 Gm Tablet , Metformin special repair 500 Mg Tablet , Metformin Tablet 1 Gm , Metformin Tablet 500 Mg , Methotrexate Injection 50 Mg, 2Ml Inj , Methotrexate Tablet 2.5 Mg , Methotrexate Tablet 50 Mg , Methoxsalen Tablet 10 Mg , Methyl Cobalamine 1500 Mcg Inj. , Methyl Cobalamine 500 Mcg Inj. , Methyl Ergometrine Injection 200 Mcg In 1 Ml Ampoule , Methyl Ergometrine Tablet 125 Mcg , Methyl Prednisolone Injection 1Gm, 1 Gm Vial With Diluent , Methyl Prednisolone Injection 80Mg , Methylcobalamin Tablet 1500 Mcg , Methylcobalamin Tablet 750 Mcg , Methylcobalamine + Pregabaline (1500+75) Tablet , Methyldopa Tablet 250 Mg , Methyldopa Tablet 500 Mg , Methylene Blue 25 Gm , Methylphenidate Tablet 5 Mg , Methylrosanilinium Chloride (Gentian Violet) Topial Preparation 0.25 % To 2% , Metoclopramide Injection 5 Mg/Ml, 2 Ml Ampoule , Metoclopramide Tablet 10 Mg , Metoprolol 5 Ml Injection , Metoprolol Tablet (Sr) 50 Mg , Metoprolol Xl 25 Mg Tablet , Metronidazole Injection 500 Mg/ 100Ml (Ffs Technology) , Metronidazole Oral Solution 200 Mg/5 Ml, 60Ml , Metronidazole Tablet 200 Mg , Metronidazole Tablet 400 Mg , Micronized Progesterone Tablet 200 Mg , Midazolam Injection 1 Mg/Ml, 5 Ml Vial , Mifepristone Tablet 200 Mg , Mifepristone Tablet 25 Mg , Minoxidil Solution 5% , Mirabegron Tablet 50 Mg , Mirtazapine Tablet 15 Mg , Mirtazepine 7.5 Mg Tablet , Misoprostol Tablet 200 Mcg , Misoprostol Tablet 25Mg , Mitomycin Injection 40 Mg , Mometasone + Terbinafine (0.1% W/W + 1.0 % W/W) 15 Gm Cream , Mometasone Furoate Cream 0.1 % W/W, 30Gm , Monteleukast Tablet 5 Mg , Montelucast 10Mg + Fexofenadine 120Mg Tablet , Morphine Injection 10 Mg/Ml, 1 Ml Ampoule , Morphine Tablet 10 Mg , Morphine Tablet 20 Mg , Morphine Tablet 30 Mg special repair , Mouth Ulcer Gel (Choline Salicylate Sodium 9% W/V, Benzalkonium Chloride 0.01% W/W) , Moxifloxacin 400 Mg. Tablet , Moxifloxacin 0.5% Eye Drop ,5Ml , Moxifloxacin 0.5% W/V+ Ketorolac 0.5% W/V Eye Drop ,5Ml , Moxifloxacin 0.5% W/V+ Prednisolone 1% W/V Eye Drop ,5Ml , Moxinidine 0.2 Mg Tablet , Multi Electrolyte Injection (Isolyte -P) 500Ml , Multi Vitamin Injection 10 Ml , Multi Vitamin Injection 2 Ml , Multi Vitamin Syrup With Trace Elements, 200Ml (Ffs Technology) , Multivitamin Drops, 15 Ml , Mupirocin Cream 5Gm, 2% W/W , Mupirocin Ointment 2% W/W, 5 Gm Tube , N-Acetylcysteine 600 Mg Tablet , Naloxone Injection 400 Mcg/Ml, 1Ml Ampoule , Naltrexone Tablet 50 Mg , Nandrolone Decanoate 50Mg Inj. , Naocl 5.25% Solution Isi/ Iso/Ce/Marked. , Naproxen 500Mg + Domperidone 10Mg Cap./Tab , Natamycin Eye Drops 2%, 5 Ml , Nebivalol Tablet 5 Mg , Neostigmine Injection 500 Mcg/ Ml , Netilmicin Injection 25Mg/Ml , Nicorandil 10 Mg Tablet , Nicorandil 5 Mg Tablet , Nicotin Chewgum 2 Mg , Nicotin Chewgum 4 Mg , Nicotine Pastilles 2 Mg , Nicotine Pastilles 4 Mg , Nicotine Patches , Nifedipine 0.3% W/W + Lidocaine 1.5% W/W Ointment, 30 Gm , Nifedipine Capsule(Sublingual) 5 Mg , Nifedipine Tablet Ip Sr/Er 10 Mg , Nikethamide Inj. 250Mg/1Ml , Nitrofurantoin Tablet 100 Mg , Nitroglycerin 2.6 Mg Tablet , Nitroglycerin 6.4 Mg Tablet , Nitroglycerin Inj. 25Mg/5Ml , Nitrous Oxide Inhalation , Nor Adernaline Injection 4Mg/2Ml , Norethisterone Tablet 5 Mg , Norfloxacin 400Mg Tab , Normal Saline (Sodium Chloride) Injection 0.9% Isotonic, 500 Ml (Ffs Technology) , Normal Saline (Sodium Chloride) Injection Solution 0.9% Isotonic, 100Ml(Ffs Technology) , Normal Saline 3% Injection 100Ml , Octreotide Injection 100 Mcg/Ml, Single Dose 1 Ml Vial , Ofloxacin + Dexamethasone Eye Drops 10 Ml , Ofloxacin 200Mg + Ornidazole 500Mg Inj.,100 Ml , Ofloxacin Tablet 200 Mg , Olanzapine 5 Mg Tablet , Olanzapine Injection 10Mg/Vial , Olanzapine Injection 210 Mg Long Acting , Olanzapine Injection 300 Mg Long Acting , Olanzapine Injection 405 Mg , Olanzapine Tablet 10 Mg , Olanzapine Tablet 20 Mg , Olmesartan 20 Mg + Amlodipine 5 Mg + Hydrochlorothiazide 12.5 Tablet , Olmesartan 20 Mg Tablet , Olpatadine 0.1%W/V Eye Drop 5 Ml , Omeprazole Capsule 20 Mg , Ondansetron Injection 2Mg/Ml ,2Ml Ampoule , Ondansetron Oral Liquid 2 Mg/ 5 Ml , Ondansetron Tablet 8 Mg , Oral Caffiene Citrate Sol. 20Mg/Ml, 3Ml , Oral Glucose 75 Gm , Oral Rehydration Salts Powder For 1000 Ml Solution , Oral Rehydration Salts Powder For 200 Ml Solution , Oseltamivir Syrup (Each 1 Ml Reconstituted Suspension Contain 12 Mg Oseltamivir, 75 Ml Bottle) Syrup , Oseltamivir Tablet 30 Mg , Oseltamivir Tablet 45 Mg , Oseltamivir Tablet 75 Mg , Oxaliplatin Injection 100Mg, 5Mg/Ml Vial , Oxaliplatin Injection 50Mg, 5Mg/Ml Vial , Oxygen (Medicinal Gas) Inhalation Per Kg , Oxytocin Injection 5 Iu In 1 Ml Ampoule , Paclitaxel Injection 260Mg, 10Mg/1.67 Ml Vial , Pantoprazole + Domperidone special repair (40Mg+30Mg) Capsule , Pantoprazole Injection 40 Mg , Paracetamol Drops 150Mg/Ml, 10 Ml Vial With Marked Dropper , Paracetamol Infusion 100 Mg/ 5 Ml, 100Ml , Paracetamol Injection 150 Mg/Ml, 2 Ml Amp. , Paracetamol Peadiatric Syrup 125Mg/ 5Ml, 60 Ml Bottle , Paracetamol Tablet 500 Mg , Paracetamol Tablet 650 Mg , Paroxetine (Cr) Tablet 25 Mg , Paroxetine Tablet (Cr) 12.5 Mg , Pazopanib Tablet 200 Mg , Peg Filgrastim Injection 6 Mg , Pemetrexed Injection 500Mg, 25Mg/Ml Vial , Pentazocine Injection 30 Mg/ Ml, 1 Ml Ampoule , Perampenel 2 Mg , Permethrin Cream 5% 30 Gm , Permethrin Lotion 5% 50 Ml , Pethidine Injection 50 Mg/Ml, 1Ml Ampoule , Pheniramine Maleate Injection 22.75 Mg/Ml, 2 Ml , Phenobarbitone Injection 200 Mg/ Ml , Phenobarbitone Oral Solution 20 Mg/ 5 Ml,60 Ml Bottle , Phenobarbitone Tablet 30 Mg , Phenobarbitone Tablet 60 Mg , Phenylephrine 10Mg + Pcm 325Mg +Cetrizine 5Mg Tablet (Anticold Tablet) , Phenytoin (Sodium) Injection 100Mg, 2Ml Amp. , Phenytoin Oral Solution 25 Mg/Ml, 100 Ml Glass Bottle , Phenytoin Tablet 100 Mg , Phenytoin Tablet 300 Mg , Phytomenadion Injection 1 Mg/0.5 Ml Water Based Single Dose (Vitamin-K1) , Pilocarpine Hcl 2% ,5Ml Eye Drops , Pilocarpine 1Ml Injection , Pioglitazone 30Mg Tab. , Pioglitazone 50 Mg Tablet , Piperacillin 1 Gm + Tazobactum 0.12Gm Injection , Pipracillin + Tazobactoam 4.5 Gm I/V Injection , Piracetam 400Mg Tab. , Piracetam 800Mg Tab. , Plasma Volume Expender Injection 500 Ml , Podophylline Resin Topical Solution 25% , 10 Ml Bottle , Posaconazole 100 Mg Tablet , Potassium Chloride (Solution) Injectable 15% (150Mg/Ml) , Potassium Chloride Oral Liquid 500 Mg/5 Ml, 100Ml , Potassium Permanganate Crystal 100 Gm(Kmno4) , Potassium Permanganate Crystal 20 Gm(Kmno4) , Povidine Iodine 10% ,500 Ml Solution , Povidine Iodine 5% Eye Drops, 5Ml , Povidine Iodine Ointment 5%,15 Gm , Povidine Iodine Scrub 7.5%, 500 Ml , Povidine Iodine Solution 5% ,500 Ml , Pralidoxime (Pam) Injection 500 Mg, 20 Ml , Prazosin 5 Mg Tablet , Prednisolone Sod. Phosphate Eye Drop 1%, 5Ml , Prednisolone Tablet 10 Mg , Prednisolone Tablet 20 Mg , Pregabalin 75 Mg+ Methylcobalamin 750 Mcg Tablet , Pregabalin 75Mg Cap. , Pregablin 75Mg +Methylcobalmin 1500Mg +Nortriptylline 10Mg , Primaquine Tablet 15 Mg , Primaquine Tablet 2.5 Mg , Primaquine Tablet 7.5 Mg , Probiotic Capsule , Prochlorperazine Mouth Dissolving Tablet Flavored Base 5Mg , Promethazine Elixir Or Syrup 5 Mg/ 5 Ml,60Ml , Promethazine Injection 25 Mg/Ml, 2 Ml annual periodical maintenance , Propofol Injection 1% Vial(10Mg/Ml,10 Ml Vial) , Propranolol Tablet (Sr) 40 Mg , Propranolol Tablet 20 Mg , Prostadin 2 Ml annual periodical maintenance Injection , Protamine Sulphate (Heparin Antagonist) Injection 10 Mg/Ml, 5-Ml Ampoule , Purified Freeze - Dried Human Coagulation Factor Viii, Virus Inactivated Injection 250 Iu , Purified Freeze Dried Human Coagulation Factor Ix, Virus Inactivated / Anti Hemophillic Factor Ix Injection 500Iu , Pyrazinamide 500 Mg Tablet , Pyrazinamide 750 Mg Tablet , Pyrazinamide 1000 Mg Tablet , Pyridium Tablet 200 Mg , Pyridoxine Tablet 50 Mg , Pyridoxine Tablet 100 Mg , Quetiapine Tablet 50 Mg , Quetiapine Tablet special repair 100 Mg , Quinine Sulphate Injection 300 Mg/ Ml, 2Ml Ampoule , Quinine Sulphate Tablet 300 Mg , Rabeprazole +Domparidone Cap. Dsr , Ramipril Tablet 5 Mg , Ranitidine Injection 25 Mg/Ml, 2 Ml annual periodical maintenance , Ranitidine Syrup 75 Mg/5 Ml, 100Ml Bottle , Ranitidine Tablet 150 Mg , Ranolazine 500 Mg Tablet , Raybiotic-Ac Ear Drop (Beclomethasone +Chloramphenical+Clotimazole+Lignocaine) 5Ml Ear Drop , Recombinant Tissue Plasminogen Activator Injection Kit (18.1 Mg, 2 Single Use Diluent Vials For Reconstitution (10 Ml Sterile Water For Injection, 2 Sterile 10 Ml Syringes, 2 Sterile Dispensing Pins, 4 Sterile Needles, 2 Alcohol Swabs , Remdesivir Injection 100Mg , Respule Levosalbutamol 1.2Mg + Ipratropium 500Mcg Respule , Ribavirin 200 Mg Cap. , Rifampicin 150 Mg Capsule , Rifampicin 300 Mg Capsule , Rifampicin 450 Mg Capsule , Rifampicin 600 Mg Capsule , Rifapentine Tablet 300 Mg , Rifaximin 550 Mg Tablet , Ringer Lactate 500 Ml (Ffs Technology) , Ringer Lactate Injection 500Ml (Glass Bottle) , Risperidone Tablet 2 Mg , Risperidone Tablet 4 Mg , Rituximab Injection 500 Mg , Rosuvasatatin 10 Mg Tablet , Rosuvasatatin 20 Mg Tablet , Rosuvastatin 10 Mg+ Fenofibrates 160 Mg Tablet , Saccharomyces Boulardii 5 Cfu Sachets , Salbutamol Inhalation Mdi- 100 Microgram/ Dose , Salbutamol Nebulizer /Respirator Sol. 2.5Mg/2.5Ml , Salbutamol Oral Solution 2 Mg/5 Ml, 100Ml , Salbutamol Tablet 4 Mg , Salicylic Acid Ointment 6%, 15 Gm , Saline Nasal Drops 0.65%, 10Ml , Savlon Antisepic Solution / Liquid 100 Ml Bottle , Seasonal Influenza Quadrivalent/ Tetravalent Vaccine Single Dose , Sensorcaine Injection 0.5% 20 Ml , Serratiopeptidase 10Mg Tab. , Sertaconazole Cream 2% W/W, 15 Gm , Sertraline Tablet (Sr) 50 Mg , Sertraline Tablet 100 Mg , Sevelamer 800Mg Tablet , Sevoflurane Inhalation 250 Ml , Silodosin Tablet 8.0 Mg , Silver Sulfadiazine 250 Gm , Silver Sulfadiazine Cream 1%,30Gm , Simethicone+ Dill Oil + Fennel Oil Syrup, 15Ml , Sodium Bicarbonate Injection 7.5 % , 10 Ml Ampoule , Sodium Carboxymethyl Celloluse Eye Drop 0.5%W/V , 10Ml , Sodium Carboxymethyl Cellulose Eye Drops 0.5%W/V, 5Ml , Sodium Chloride Topical Eye Drop 6%W/V , 5Ml , Sodium Fusidate Skin 2% W/V Ointment 15Gm , Sodium Hylanuranate 1.8 % In 1 Ml Pfs ( (Isi/Iso/Ce Certified)) , Sodium Valproate Injection 100 Mg/Ml, 5Ml , Sodium Valproate Suspension 200 Mg/5 Ml, 100 Ml , Sodium Valproate/Valproic Acid (Sodium)Controlled Released Tablet 300 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 200 Mg , Sodium Valproate/Valproic Acid Enteric Coated Tablet 500 Mg , Sofosbuvir 400 Mg Tablet , Sofosbuvir 400 Mg Tablet + Ledipasvir 90 Mg Tablet , Sofosbuvir 400Mg+ Velpatasvir 100 Mg Tablet , Sorafenib Tablet 200 Mg , Sorbitrate (Iso-Sorbidnitrate Sublingual) 5 Mg Tablet , Spironolactone Tablet 25 Mg , Streptokinase Injection Powder 1500000 Iu , Succinyl Choline Injection 50 Mg/Ml, 10Ml , Sucralfate 1Gm With Oxetacain 10Mg/10Ml Suspension, 100 Ml Bottle , Sulfadoxine + Pyrimethamine Tablet 500 Mg + 25 Mg , Sulfasalazine Tablet 500 Mg , Sunitinib Tablet 50 Mg , Sunscreen Lotion Spf 26, 100 Ml , Surfactant- Survanta(Synthetic)(25 Mg/1Ml), Exosurf (Bovine) , Tacrolimus Ointment 0.03% W/W, 10 Gm , Tadalafil 10 Mg , Tamoxifen Citrate Tablet 10 Mg , Tamoxifen Citrate Tablet 20 Mg , Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg Tablet , Tamsulosin Tablet 0.4 Mg , Telmisartan Tablet 40 Mg , Telmisartan Tablet 80 Mg , Temozolamide Tablet 100 Mg , Temozolamide Tablet 250 Mg , Temphos 50% Ec 5 Liter Pack , Tenecteplase Injection 20 Mg , Teneligliptin Film Coated Tablet 20 Mg , Tenofovir 300 Mg Od Tablet , Tenofovir 300 Mg+ Lamivudine 300 Mg Tablet , Terbinafine Tablet 250 Mg , Terlipressin 1 Mg Inj. , Tetanus Toxoid Injection 0.5 Ml Ampoule , Tetanus Toxoid Injection 5 Ml Vial , Thalidomide Tablet 100 Mg , Thiamine Injection 100 Mg/Ml, 2 Ml , Thiamine Tablet 100 Mg , Thiocolchicoside Capsule 4 Mg , Thiopentone Injection Powder 0.5 G , Thyroxine Tablet 100 Mcg , Thyroxine Tablet 125 Mcg , Thyroxine Tablet 150 Mcg , Thyroxine Tablet 25 Mcg , Thyroxine Tablet 50 Mcg , Thyroxine Tablet 75 Mcg , Timolol Eye Drops 0.5% ,5Ml , Tinidazole Tablet 500 Mg , Tizanidine Tablet 4Mg , Tobramycin Eye Drops 0.3% W/V, 5Ml , Tocilizumab Injection 400 Mg/20 Ml , Toperamate Tablet 50 Mg , Torasemide Tablet 10 Mg , Torasemide Tablet 20 Mg , Torsemide + Spironolactone 10/50 Mg Tablet , Tramadol Capsule 50 Mg , Tramadol Hydrochloride Capsule 100 Mg , Tramadol Injection 50 Mg/Ml, 2 Ml Ampoule , Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet , Tranexamic Acid Injection 500 Mg/5 Ml , Tranexamic Acid Tablet 500 Mg , Tranylcypromine Tablet 5 Mg , Trastuzumab Injection 150 Mg , Trastuzumab Injection 450 Mg , Tretinon Gel (0.05%) 20Gm , Triamcinolone Injection 40 Mg/Ml , Triancinolone Oral Paste/Gel (0.1%) , Tricholine Citrate 275Mg + Cyproheptadine Hcl 2Mg/5Ml Syrup, 200Ml , Trihexyphenidyl Tablet 2 Mg , Trihexyphenidyl Tablet 5 Mg , Trimetazidine 35 Mg Tablet , Tropciamide Eye Drops 5Ml , Tropicamide + Phenylepherine Eye Drops 0.8% + 5%, 5Ml , Tropicamide Eye Drops 1% Eye Drop 5Ml , Tropicamide+Phenylepherine(0.8%+5%) Eye Drop 5Ml , Tryptan Blue Dye 0.06% W/V, 1 Ml Vial , Ursodeoxycholic Acid Tablet 300 Mg , Valethamate Injection 8 Mg/Ml , Vancomycin Injection 500 Mg , Vareniciline 0.5Mg Tablet , Vareniciline 1 Mg Tablet , Vecuronium Injection 10Mg Vial , Venalafaxine Tablet 37.5 Mg , Venalafaxine Tablet 75 Mg , Verapamil Tablet 40 Mg , Vidagliptin 50Mg , Vinblastine Injection 10 Mg, 1Mg/Ml Vial , Vincristine Suphate Injection 1 Mg, 1Mg/Ml Vial , Vitamin A Oral Solution 100000 Iu/Ml, 100Ml Bottle , Vitamin D Tablet (Chewable) 60000Iu , Vitamin D3 Drops 400 Iu/Ml, 30 Ml , Vitamin-D3 60000 Iu Cap. , Voglibose 0.3 Mg + Metformin 500Mg+ Glimipride 1 Mg Tablet , Voglibose 0.3 Mg Tablet , Vortioxetine Tablet 10 Mg , Warfarin (Sodium) Inj Single Dose Vial , Warfarin (Sodium) Tablet 2 Mg , Wax Dissolving Ear Drops Paradichlorbenzene + Benzocain + Chlorbutol + Turpentine Oil 2 % + 2.7 % + 5 % + 15 %, 15 Ml Bottle , Weekly Iron Folic Acid Tablet Each Tablet Containing 60 Mg Elemental Iron+500 Mcg Folic Acid, Sugar Coated ,Blue Colour , Xylometazoline Nasal Drops 0.05 %, 10Ml , Xylometazoline Nasal Drops 0.1 %, 10Ml , Zinc (Sulphate) Dispersible Tablet 20 Mg , Zinc Oral Drops, 30Ml , Zinc Syrup 20 Mg/5Ml, 100Ml , Zolidronic Acid Injection 4 Mg , 4% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 25 , 6% Taper Gutta Percha Size 30 , 6% Taper Gutta Percha Size 35 , 6% Taper Gutta Percha Size 40 , Absorbent Point No.15-40, Isi/Iso/Ce Marked Packet Of 200 , Absorbent Point No.45-80, Isi/Iso/Ce Marked Packet Of 200 , Acrylic Teeth Cross Linked Anterior Set Of 12 Teeth Isi/Iso/Ce Marked , Acrylic Teeth Cross Linked Posterior Set Of 16 Teeth Isi/Iso/Ce Marked , Acrylic Teeth Cross Linked Teeth Set Of 28 Teeth Isi/Iso/Ce Marked , Acrylic Trimming Stone (Various Grit) Isi/Iso/Ce Marked , Acrylic Trimming Stone Isi/Iso/Ce Marked , Agar Isi/Iso/Ce Marked , Air Rotor Cartridges (Nsk) Standard Head Isi/Iso/Ce Marked , Air Rotor Cartridges (Nsk) Supertorque Isi/Iso/Ce Marked , Air Rotor Spray Isi/Iso/Ce Marked Bottle , Alginate Impression Material Isi/Iso/Ce Marked , Alu Wax Isi/Iso/Ce Marked , Amalgam Finishing Kit , Arch Bar Length 1 Feet Isi/Iso/Ce Marked , Articulating Paper Isi/Iso/Ce Marked (40-100 Microns) , B.P. Blade Size 11 Isi/Iso/Ce Marked , B.P. Blade Size 15 Isi/Iso/Ce Marked , B.P. Blade Size 23 Isi/Iso/Ce Marked , Beading Wax Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 2 Mm Thickness Isi/Iso/Ce Marked , Bioplast Sheets Proprietary Item 3 Mm Thickness Isi/Iso/Ce Marked , Blue Elastic Separators ( Leone/ American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 1St Molars .022€ Mbt With Upper Triple And Lower Double Slot (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bondable Buccal Tubes Upper And Lower Right And Left 2Nd Molars .022€ Mbt (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Bonding Agent For Composite 2 Bottle Self Etch System Isi/Iso/Ce Marked 4-6 Gm Or Equivalent In Ml , Bonding Agent For Composite One Bottle Total Etch System (Bottle With Primer +Adhesive) 4-6 Gm Or Equivalent In Ml. Isi/Iso/Ce Marked , Bone Graft Material For Dental Purpose Isi/Iso/Ce/Marked , Boxing Wax Isi/Iso/Ce Marked , Calcium Hydroxide Paste In Syringe Isi/Iso/Ce Marked , Calcium Hydroxide Two Paste System Isi/Iso/Ce Marked , Carborundum Disc (Assorted Size)Isi/Iso/Ce Marked , Cavity Varnish Isi/Iso/Ce Marked , Ceramic Finishing Kit , Chrome Cobalt Alloy Isi/Iso/Ce Marked , Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked , Colourless O Rings (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Composite Finishing Kit - Disc Type With 180 To 240 Dics Of Different Grits ,Mandrel , Composite Finishing Kit With 12 To 24 Finishing Points Of Different Shapes , Composite Nanohybrid , Crimpable Hooks Isi/Iso/Ce Marked , Cu Niti Wires Rectangular Isi/Iso/Ce Marked , Cu Niti Wires Round Isi/Iso/Ce Marked , Dental Stone Isi/Iso/Ce Marked , Denture Polishing Cake Isi/Iso/Ce Marked , Diamond Disc For Lab Micro-Motor (Assorted Size)Isi/Iso/Ce Marked , Die Stone Isi/Iso/Ce Marked , Digital Films Size 11€X14” Compatible With Kodak Dry View 5800 Digital Imager Isi/Iso/Ce Marked , Digital Films Size 8€X10” Compatible With Kodak Dry View 5800 Digital Imager Isi/Iso/Ce Marked , Disclosing Agent Isi/Iso/Ce Marked , Disposable Patient Drape Sheets Size 1X1 Mtrs. , Dual Cure Resin Cement 9-11 Gm , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Continous Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Long Types Isi/Iso/Ce Marked , Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Short Types Isi/Iso/Ce Marked , Electro- Polishing Solutionisi/Iso/Ce Marked , Endo Ice , Esthetic Fiber Post System , Etchant 37% Phosphate Acid In Gel Form 2-4 Gm, Isi/Iso/Ce Marked , Eugenol 110 Ml/Gm Isi/Iso/Ce Marked , Expansion Screw 3 Pin (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Fiber-Reinforced Splinting Material- Bondable Reinforced Ribbon Fiber-Approx. 2Mm Width Isi/Iso/Ce Marked , Finishing Stones (Assorted Size) Isi/Iso/Ce Marked , Fixer & Developer Solution Set ( Autoprocessor ) To Make 1.25 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Fixer & Developer Solution Set (Manual) To Make 13.5 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked , Flowable Composite , Forsus Fatigue Resistant Device( 3 M Unitek ), Proprietary Itemisi/Iso/Ce Marked , Friction Grip Carbide Burs For Cutting (Different Shapes) Isi/Iso/Ce Marked , Friction Grip Carbide Burs For Finishing (Different Shapes) Isi/Iso/Ce Marked , Friction Grip Diamond Burs (Different Shapes) Isi/Iso/Ce Marked , Gates Glidden Drill No.1 , Gates Glidden Drill No.2 , Gates Glidden Drill No.3 , Glass Lonomer Luting Cement Isi/Iso/Ce Marked , Glass Lonomer Restorative Cement Isi/Iso/Ce Marked , Glass Lonomer Silver Reinforced Isi/Iso/Ce Marked , Gluteraldehyde 2.45% W/V Disinfection Solution Isi/Iso/Ce Marked , Green Stick Impression Compound Isi/Iso/Ce Marked , Gutta Percha Point No. 15-40, Isi/Iso/Ce Marked , Gutta Percha Point No. 20, Isi/Iso/Ce Marked , Gutta Percha Point No. 25, Isi/Iso/Ce Marked , Gutta Percha Point No. 30, Isi/Iso/Ce Marked , Gutta Percha Point No. 45-80, Isi/Iso/Ce Marked , Heat Cure Acrylic Liquid Isi/Iso/Ce Marked , Heat Cure Acrylic Powder Isi/Iso/Ce Marked Pink , Hybrid Composite Resin For Anteriors 3-4 Gram Isi/Iso/Ce Marked , Impression Compound Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Blue Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Green Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Red Isi/Iso/Ce Marked , Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Yellow Isi/Iso/Ce Marked , Investent Material And Liquid (Phosphate Bonded) Isi/Iso/Ce Marked (For Chrom Cobalt) , Investent Material And Liquid (Phosphate Bonded) Isi/Iso/Ce Marked (For Porcelain) , Investment Material (Gypsum Bonded) Isi/Iso/Ce Marked , Investment Material (Silicate Bonded) Isi/Iso/Ce Marked , Iopa Film Size 30/31 Mm X 40/41 Mm (Packet Of 150 Films ) Isi/Iso/Ce Marked , Iowa Wax Isi/Iso/Ce Marked , Korecta Wax No. 4 Isi/Iso/Ce Marked , Lentulo Spiral Filler , Ligature Wire Spool 0.009€(T Porthodontics/American Orthodontics / Libral) Isi/Iso/Ce Marked , Ligature Wire Spool 0.010€(T Porthodontics/American Orthodontics / Libral) Isi/Iso/Ce Marked , Light Cure Bonding Material (Dentsply / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek )Isi/Iso/Ce Marked , Light Cure Composite Resin-Packable Isi/Iso/Ce Marked 2-4 Gm Syringe , Local Anesthetic Liganocaine 2% With Adr 1 In 80000 For Dental Use , Loose Preadjusted Edgewise Mbt Bracket 022 Slot Isi/Iso/Ce Marked Per Bracket , Matrix Band (No. 1 Toflemire)-1Si/Iso/Ce Marked , Matrix Band (No. 8 Toflemire)-1Si/Iso/Ce Marked , Maxillofacial Silicone And Stain Isi/Iso/Ce Marked , Medical X-Ray Film (1X50) 8 X10 , Mercury Pure Triple Distilled 225Gm Vial Isi/Iso/Ce Marked , Metal Polishing Cakeisi/Iso/Ce Marked , Mineral Trioxide Aggregate Isi/Iso/Ce Marked , Mock Up/Diagnostic Waxisi/Iso/Ce Marked , Modeling Wax Isi/Iso/Ce Marked , Naoci 5.25% Solution Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -016X022 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -017X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Rectangular -019X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 014 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 016 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 018 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Ni Ti Preformed Orthodontic Wire Round - 020 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Nickel Chromium Alloy Isi/Iso/Ce Marked Pack Of 1 Kg , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 12Mm Isi/Iso/Ce Marked , Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 9Mm Isi/Iso/Ce Marked , Ni-Ti Open Coil Spring0 10€X 030 (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marke , Occlusal X-Ray Films (57X76 Mm) Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 10 Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 6Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 7Mm Isi/Iso/Ce Marked , Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 8Mm Isi/Iso/Ce Marked , Pit & Fissure Sealant Light Cure , Low Viscosity, Fluoride Releasing Isi/Iso/Ce Marked , Plaster Of Paris For Dental Use Isi/Iso/Ce Marked , Polyether Impression Material Base & Catalyst Base 300Ml, With 60 Ml Catalyst , One Dispenser With 3 Year Replacement Warranty Free With 50 Packs , Powerscope 2 (American Orthodontics Proprietary Item)Isi/Iso/Ce Marked , Pre Fabricate Metallic Post (Threaded) , Pre Fabricated Metallic Post ( Cemented) , Preadjusted Edgewise Stainless Steel Brackets Kit Containing Upper & Lower 2Nd Premolar To 2Nd Premolar Bondable Brackets With Upper Triple And Lower Double Weldable Buccaltubes,With Roth And Mbt Prescription And 0.022€And 0.018€ Slot (Leone/American Orth , Preformed Molar Bands Without Buccal Tubesisi/Iso/Ce Marked , Protemp 4 (Bisgma Temporary Crown Material) Iso/Isi/ Ce , Pumice Isi/Iso/Ce Marked , Resin Bonded Zinc Oxide-Eugenol Cement Isi/Iso/Ce Marked , Resin Cement Isi/Iso/Ce Marked , Retraction Cord (Assorted Size Isi/Iso/Ce Marked , Revo S Rotary Files Size As30 , Revo S Rotary Files Size As35 , Revo S Rotary Files Size As40 , Revo S Rotary Files Size Sc1 , Revo S Rotary Files Size Sc2 , Revo S Rotary Files Size Su , Ring Liner (Asbestos)Isi/Iso/Ce Marked , Root Canal File K 15-40, 21 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal File K 15-40, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal File K 45-80, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 15, 21 Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files H- 15-40 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files H 15-40, 25 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 20 (21 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- 45-80 (25 Mm) Pkt. Of Six Isi/Iso/Ce Marked Ce Marked Pkt. Of 200 , Root Canal Files H- 45-80, 21 Mm Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files H- No. 15 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files H- No. 20 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- 15, 21 Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- 20 (21 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Files K- 45-80, 21Mm Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 10 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 10, 25 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 15 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- No. 20 (25 Mm) Isi/Iso/Ce Marked , Root Canal Files K- No. 6 (21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No. 6, ( 25 Mm) Pkt. Of Six 197.00 Isi/Iso/Ce Marked , Root Canal Files K- No. 8,(21 Mm) Pkt. Of Six Isi/Iso/Ce Marked , Root Canal Files K- No.8, 25 Mm) Pkt. Of Six Isi/Iso/ Ce Marked , Root Canal Spreader 15-40, 21 Mm Isi/Iso/Ce Marked , Root Canal Spreader 15-40, 25 Mm Isi/Iso/Ce Marked , Rotary Niti Files With 4% Taper Size #15/17.#20,#30.##40,21 Mm And 25 Mm Pack Of 4-6, Isi/Iso/Ce Certified/Usfda , Rotary Niti Files With 6% Taper Size #15/17.#20,#30.##40,21 Mm And 25 Mm Pack Of 4-6, Isi/Iso/Ce Certified/Usfda , Rpd Pattern Wax: Clasp Patternisi/Iso/Ce Marked , Rpd Pattern Wax: Major Connector Pattern Isi/Iso/Ce Marked , Rpd Pattern Wax: Minor Connector Pattern Isi/Iso/Ce Marked , Rubber Base Impression Material Addition Silicone Putty Isi/Iso/Ce Marked , Rubber Base Impression Material Addition Silicone Putty With Compatible Light Body 600-900Ml Putty With 50 Ml Light Per 300Ml Of Putty Isi/Iso/Ce Marked , Rubber Dam Sheet Isi/Iso/Ce Marked , Sand (For Sand Blaster)(250Micron) , Sand Paper Mandrel Isi/Iso/Ce Marked , Sand Paper No 100 Isi/Iso/Ce Marked , Sand Paper No 1000 Isi/Iso/Ce Marked , Sand Paper No 120 Isi/Iso/Ce Marked , Sand Paper No 400 Isi/Iso/Ce Marked , Sand Paper No 80 Isi/Iso/Ce Marked , Self Cure Bonding Material Isi/Iso/Ce Marked , Self Polymerizing Acrylic Liquid Isi/Iso/Ce Marked , Self Polymerizing Acrylic Powder Isi/Iso/Ce Marked Pink , Shellac Base Plate Isi/Iso/Ce Marked , Silicone Adhesive Isi/Iso/Ce Marked , Silicone Interocclusal Record Material Isi/Iso/Ce Marked , Silk Suture Material (3-0) , Silver Alloy Non Gamma-2 Lathe Cut Alloy 30 Gm Vial Isi/Iso/Ce Marked , Small Cotton Rolls For Isolation Isi/Iso/Ce Marked A Pack Of 1000 Pieces , Soft Denture Liner Isi/Iso/Ce Marked , Sprue Wax (Assorted Sizes)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 016X022 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 017X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Rectangular 019X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 014 Inch (Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 016 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 018 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Preformed Orthodontic Wire Round 020 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked , Stainless Steel Wire 19 G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 21G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 26G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire 30G. Soft Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 19 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 20 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 21 Gauge Isi/Iso/Ce Marked , Stainless Steel Wire Spool ( Leone / Konark/Ss White) 23 Gauge Isi/Iso/Ce Marked , Sterilization Rolls For Packing Instrument 10Cm X 200 Mtrs. , Sterilization Rolls For Packing Instrument 15Cm X 200Mtrs , Sticky Wax Isi/Iso/Ce Marked , Suction Tips Isi/Iso/Ce Marked , Surgical Bur Straight Fissure Carbide 1 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 1.5 Mm Isi/Iso/Ce/Marked , Surgical Bur Straight Fissure Carbide 2 Mm Isi/Iso/Ce/Marked , Tma Wire Lengths Rectangular - 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wire Lengths Rectangular - 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tma Wires Preformed Rectangular- 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked , Tooth Colored Self Cure Acrylic Resin (Self Cure) Isi/Iso/Ce Marked , Tooth Preparation Kit Set Of Minimum 14 Burs Isi/Iso/ Ce Marked , Topical Fluoride Apf Gel 1.25% Isi/Iso/Ce Marked , Tray Adhesive For Addition Siliconeisi/Iso/Ce Marked , Waxes For Fpd (Assorted Consistency) Isi/Iso/Ce Marked (Block Out, Margin Wax, Carving Wax, Dipping Wax, Blue Wax, Spacer Wax Etc.) , Zinc Oxide Eugenol Impression Paste Isi/Iso/Ce Marked Pkt. Of (100-125)+ (60-90) Gm , Zinc Oxide Non Eugenol Impression Paste Isi/Iso/Ce Marked (Catalyst + Base Past) , Zinc Oxide Non -Eugenol Luting Cement Isi/Iso/Ce Marked , Zinc Oxide Powder 110 Gram Isi/Iso/Ce Marked , Zinc Phosphate Cement 30-100 Gm With Corresponding Liquid Isi/Iso/Ce Marked , Abdominal Drain 28 No (Isi/Iso/Ce Certified) , Abdominal Drain 30 No (Isi/Iso/Ce Certified) , Abdominal Drain 32 No (Isi/Iso/Ce Certified) , Absorable Gelatin Sponge, Single Unit(Abgel) , Adhesive Plaster(Medigrip) 3 Inches , Adhesive Plaster(Medigrip) 04 Inches , Agfa Complete X Ray Cassette With I.P Size 10X12 ( (Isi/Iso/Ce Certified)) , Agfa Complete X Ray Cassette With I.P Size 14X17 ( (Isi/Iso/Ce Certified)) , Agfa Complete X Ray Cassette With I.P Size 8X10 ( (Isi/Iso/Ce Certified)) , Agfa Cr Film (Dt2b)(1X100) 10X12 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 11X14 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 14X17 (Isi/Iso/Ce Certified) , Agfa Cr Film (Dt2b)(1X100) 8X10 (Isi/Iso/Ce Certified) , Agfa X-Ray Cassette Without I.P 10X12 (Isi/Iso/Ce Certified) , Agfa X-Ray Cassette Without I.P Size 14X17 (Isi/Iso/Ce Certified) , Airway Set Size 2, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 3, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 4, ( Single Unit) (Isi/Iso/Ce Certified) , Airway Set Size 5, ( Single Unit) (Isi/Iso/Ce Certified) , Alcohol Swabs A Pack Of 1X100 Saturated With 70% Isopropyl Alcohol Celloluse Swab , Ambu Bag Adult, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 7 K Pa ( 70 Cm H2o Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 1300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Neonates, It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Ambu Bag Ped, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 4 K Pa ( 40 Cm H2o Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) , Anterior Chamber Kellmann Multi Flex 4 Point Fixation Type Optical Diameter 6Mm,Overall Length 12.5 Mm, Dioptric Range 10D To 30 D (Isi/Iso/Ce Certified) , Anterior Chamber Pmma Iol Optical Diameter 5.25Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range 10 D To 30 D ( Appaswamy) , Anterior Chamber Pmma Iol Optical Diameter 6 Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range 10 D To 30 D ( Appaswamy) , Aprons (Lab Coats ) (Small) Full Sleeves , Aprons (Lab Coats ) (Small) Half Sleeves , Aprons (Lab Coats) (Large) Full Sleeves , Aprons (Lab Coats) (Large) Half Sleeves , Aprons (Lab Coats) (Medium) Full Sleeves , Aprons (Lab Coats) (Medium) Half Sleeves , B.P. Blade 23 No. (Isi/Iso/Ce Certified) , Bain Circuit Adult (Isi/Iso/Ce Certified) , Bain Circuit Pediatric (Isi/Iso/Ce Certified) , Band Aid (Regular) (Isi/Iso/Ce Certified) , Band Aid (Regular) (Jhonson & Jhonson) , Bakri Ballon Tamponade , Bakri Ballon Catheter , Bb Splint (Bohler- Braun) (Isi/Iso/Ce Certified) , Bed Sheet Size-150 X 240 Cm, All Colours , Bed Sheet Size-150 X 240 Cm, Color:Blue , Bed Sheet Size-150 X 240 Cm, Color:Green , Bed Sheet Size-150 X 240 Cm, Color:Indigo , Bed Sheet Size-150 X 240 Cm, Color:Orange , Bed Sheet Size-150 X 240 Cm, Color:Peach , Bed Sheet Size-150 X 240 Cm, Color:Violet , Bed Sheet Size-150 X 240 Cm, Color:White , Bed Sheet Size-150 X 240 Cm, Color:Yellow , Blades For Eye Surgery 2.2 Mm (Crescent) ( Appasamy)) , Blades For Eye Surgery 2.8 Mm (Keratome) ( Appasamy) , Blades For Eye Surgery 3.0 Mm ( Appasamy) , Blades For Eye Surgery 3.2 Mm ( Appasamy)) , Blades For Eye Surgery 2.6 Crescent ( Appasamy)) , Blades For Eye Surgery Implant 5.2 Mm ( Appasamy)) , Blades For Eye Surgery Side Port 15° ( Appasamy)) , Blankets,Red Standared Wt. And Size (Isi/Iso/Ce Certified) , Blood Bag Paed. 100Ml ( Romsons) , Blood Bag Paed. 100Ml (Isi/Iso/Ce Certified) , Blood Collecting Safety Syringe ( (Isi/Iso/Ce Certified)) , Blood Filter Set With Air Vent(Double Chamber) (Isi/Iso/Ce Certified) , Blood Filter Set With Air Vent(Double Chamber) (Romsons) , Cancellous Full Thread 6.5 ( (Isi/Iso/Ce Certified)) , Cassette Holding Tray (20-25 Cassette Holding Capacity) ( (Isi/Iso/Ce Certified)) , Catgut Suture (Chromic Catgut)Usp 1, 76 Cm X 63 Mm, 3/8 Circle ( (Isi/Iso/Ce Certified)) , Cautery Pad , Chest Drain (Adults) ( (Isi/Iso/Ce Certified)) , Chest Drain Bag ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 12 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 14 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 28 ( (Isi/Iso/Ce Certified)) , Chest Drain Catheter No. 32 ( (Isi/Iso/Ce Certified)) , Chest Tube Drainage With Trocar And Cannula ( (Isi/Iso/Ce Certified)) , Chest Tube With Underseal Bag 32 ( (Isi/Iso/Ce Certified)) , Cord Clamp ( (Isi/Iso/Ce Certified)) , Corugated Drain Sheet ( (Isi/Iso/Ce Certified)) , Cotton Bandages 10 Cm X 4 Mtrs(Isi Standard , Iso9001 &Gmp Certified) Rate Per Single Bandage , Cotton Bandages 15 Cm X 5 Mtrs(Isi Standard ,Iso9001& Gmp Certified)Rate Per Single Bandage , Cotton Bandages 5 Cm X 4 Mtrs(Isi Standard ,Iso 9001 & Gmp Certified)Rate Per Single Bandage , Cotton Gauze Cloth 90 Cm X 18 Mtrs(Isi Standard , Iso9001 &Gmp Certified)Rate Per Single Bandage , Cotton Pad 4 Packed Isi Marked ,Iso9001& Gmp Certified , Cotton Pad 6 Packed Isi Marked ,Iso9001& Gmp Certified , Cotton Wool Ip 100 Gm(Fine Absorbable Quality Sterlize) Nett Weight Iso9001& Gmp Certified , Cotton Wool Ip 500 Gm(Fine Absorbable Quality Sterlize) Nett Weight Iso9001&Gmp Certified , Courtery Lead ( Single Unit) ( (Isi/Iso/Ce Certified)) , Coutery Pad (Single Unit) ( (Isi/Iso/Ce Certified)) , Cpd Bag Double With Sagm 450 Ml ( (Isi/Iso/Ce Certified)) , Cpd Bag Double With Sagm 450 Ml ( Romsons) , Cpda Bag/ Blood Begs 350Ml ( (Isi/Iso/Ce Certified)) , Cpda Bag/ Blood Begs 350Ml ( Romsons) , Craner Wire Splint ( (Isi/Iso/Ce Certified)) , Crape Bandages Bp 10 Cm X 4.5 Mtrs ( (Isi/Iso/Ce Certified)) Rate Per Single Bandage , Crape Bandages Bp 15 Cm X 4.5 Mtrs(Isi Standard, Iso 9001&Gmp Certified )Rate Per Single Bandage , Dark Glasses , Dead Body Cover Size - 06 Feet Full Size , Developer For X-Ray To Make 13.5 Ltr. Solution ( (Isi/Iso/Ce Certified)) , Diaper Paediatric , Diaper Neonate , Didecyidimethyl Amonium Chloride And Benzyl C12c16 Alkyl Methyl Chloride Solution Presaturated Wipes ( (Isi/Iso/Ce Certified)) , Dispo Face Shield ( (Isi/Iso/Ce Certified)) , Disposable Adhesive Cannula Fixator (Iso 9001&Gmp Certified) , Disposable Bed Sheet , Disposable Cap With Elastic ( (Isi/Iso/Ce Certified)) , Disposable Eye Patch ( (Isi/Iso/Ce Certified)) , Disposable Eye Sticking Pad (Attached Multilayered) ( (Isi/Iso/Ce Certified)) , Disposable Eye Sticking Pad (Attached Multilayered) ( Appaswamy) , Disposable Insulin Syringe (31G) ( (Isi/Iso/Ce Certified)) , Disposable Mask With Strings ( (Isi/Iso/Ce Certified)) , Disposable Needle No. 16 ((Isi/Iso/Ce Certified) ) , Disposable Needle No. 21 No. ( (Isi/Iso/Ce Certified) , Disposable Needle No. 23(Isi/Iso/Ce Certified) , Disposable Needle No. 24 (Isi/Iso/Ce Certified) , Disposable Needle No. 26 (Isi/Iso/Ce Certified) , Disposable Nitrile Gloves 6.5 No. ( (Isi/Iso/Ce Certified)) , Disposable Nitrile Gloves 7 No. ( (Isi/Iso/Ce Certified)) , Disposable Nitrile Gloves 7.5 No ( (Isi/Iso/Ce Certified)) , Disposable Patient Drape Sheets ( (Isi/Iso/Ce Certified)) , Disposable Patient Drape Sheets ( Romsons) , Disposable Plastic Bed Pan ( (Isi/Iso/Ce Certified)) , Disposable Plastic Dropper (Capacity 3Ml)( (Isi/Iso/Ce Certified)) , Disposable Plastic Urine Pot ( (Isi/Iso/Ce Certified)) , Disposable Shoe Cover ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 6.5 ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 7 ( (Isi/Iso/Ce Certified)) , Disposable Sterile Powder Free Gloves For Eye Surgeries Size 7.5 ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6.5 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 6.5 No ( Surgicare) , Disposable Surgical Gloves 7 No ( (Isi/Iso/Ce Certified)) , Disposable Surgical Gloves 7 No ( Surgicare) , Disposable Surgical Gloves 7.5 No ( (Isi/Iso/Ce Certified)) , Disposable Syringe 20 Ml With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringe 50 cement concrete With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 1 Ml (23G) ( (Isi/Iso/Ce Certified)) Ribbon Pack , Disposable Syringes 1 Ml With 26 No. Needle ( (Isi/Iso/Ce Certified))Ribbon Pack , Disposable Syringes 50 Ml. With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 10 Ml. With Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 23 No. Needle ( Romsons) , Disposable Syringes 2 Ml With 24 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 2 Ml With 24 No. Needle ( Romsons) , Disposable Syringes 3 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 3 Ml With 24 No. Needle (( Romsons) , Disposable Syringes 5 Ml With 23 No. Needle ( (Isi/Iso/Ce Certified)) , Disposable Syringes 5 Ml With 23 No. Needle ( Romsons) , Double Blood Bags 350 Ml , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color ( (Isi/Iso/Ce Certified)) , Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color ( Romsons) , Drapes With Drainage Bag 100X80 Cm Double Layered Pre Cut ( (Isi/Iso/Ce Certified)) , Draw Sheet/ Ot Sheet, 2 Mtr , Dyna Plast Adhesive Tape ( 10 Cm Width, 5 Cm Length) Isi Marked &Gmp Certified , Ecg Electrodes (Neonate) ( (Isi/Iso/Ce Certified)) , Ecg Electrodes Adult (Disposable Kit Pack Of 6) ( (Isi/Iso/Ce Certified)) , Ecg Electrodes Pediatric (Disposable Kit Pack Of 6) ( (Isi/Iso/Ce Certified)) , Ecg Paper 50 Mm*20 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 50 Mm*30 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 60 Mm* 15 Mtr, Roll ( (Isi/Iso/Ce Certified)) , Ecg Paper 80Mm*15,20,30Mtr Roll ( (Isi/Iso/Ce Certified)) , Ecg Roll Big ( (Isi/Iso/Ce Certified)) , Ecg Roll Small ( (Isi/Iso/Ce Certified)) , Ecg Paper 215 Mm*20 Mtr, Roll (Bionet Cardiocare-2000 Model) , Ecg Paper A4 Size (Edan Machine) , Ecg Paper Recording Paper 210 Mm*20 Mtr, Roll (Bpl Cardiart-9108 Model) , Ecg Paper Recording Paper 210 Mm*300Mm*200 Sheet ( Bpl Machine Model -Cardiart 9108) , Endotrocheal Tube 2 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 2.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 3 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 6.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7 Cuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube 7.5 Cuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 3.5 Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 4 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 5 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 5.5 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 6 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube No. 8 (Isi, Iso9001,Ce Marked&Gmp Certified) , Endotrocheal Tube( All Sizes) Cuffed (Iso9001, Ce Marked& Gmp Certified) , Endotrocheal Tube( All Sizes) Uncuffed (Isi, Iso9001,Ce Marked&Gmp Certified) , Epidural Set , Eustachian Tube Cathetor ( (Isi/Iso/Ce Certified)) , Eustachian Tube Cathetor ( (Isi/Iso/Ce Certified)) , Examination Gloves All Sizes (Wt Min. 4.5 Gm Per Piece) ( (Isi/Iso/Ce Certified)) , Eye Drapes (Sheet) 80X70 Cm Pre Cut (Romsons) , Eye Drapes (Sheet) 80X70 Cm Pre Cut (Appasamy) , Eye Drapes (Sheet)100X80 Cm Pre- Cut (Romsons) , Eye Drapes (Sheet)100X80 Cm Pre- Cut (Appasamy) , Eye Wipes (Sterilized) ( (Isi/Iso/Ce Certified)) , Fixer For X-Ray To Make 13.5 Ltr. Solution ( (Isi/Iso/Ce Certified)) , Fluorescein Strips For Eye ( Appaswamy) , Foleys Catheter 10 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 12 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 14 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 16 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 18 ( (Isi/Iso/Ce Certified)) , Foleys Catheter 8 ( (Isi/Iso/Ce Certified)) , Fuji X-Ray Films 10X12 Dry ( (Isi/Iso/Ce Certified)) A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 11X14 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 14X17 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Fuji X-Ray Films 8X10 Dry ( (Isi/Iso/Ce Certified))A Pack Of 100 Rate Per Pack , Green Blade 45 Degree ( Appaswamy) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 15.5 Cm X 8.5Cm (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 25 Cm X 10 Cm , (Pack Of 100) , Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Eliptical Pores Mesh 6.5 Cm X 5 Cm (Pack Of 100) , Guide Wire Teflon Coated V Straight Tip ( (Isi/Iso/Ce Certified)) , Gulde Wire For Interlocking/Dhs ( (Isi/Iso/Ce Certified)) , Hard Cervical Collar (Universal) Size (Isi/Iso/Ce Certified) , Hydro Dissection Cannula 26 No ( (Isi/Iso/Ce Certified)) , Hydro Dissection Cannula 27 No ( (Isi/Iso/Ce Certified)) , Hydrodisection Cannula ( (Isi/Iso/Ce Certified)) , Hydrophobic Acrylic Foldable Iols ( Aciol)In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +1.0 Ds To +30 Ds ( Appasamy) , I.V. Cannula 16 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 18 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 20 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 22 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 24 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 26 ( (Isi/Iso/Ce Certified)) , I.V. Cannula 28 ( (Isi/Iso/Ce Certified)) , I.V. Flow Regulator Extension Sets ( (Isi/Iso/Ce Certified)) , I.V.Sets Disposable With Air Vent ( (Isi/Iso/Ce Certified)) , I.V.Sets Disposable With Air Vent ( Romsons) , Infant Feeding Tube 4 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 5 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 6 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 7 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 8 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube 9 ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube All Sizes ( (Isi/Iso/Ce Certified)) , Infant Feeding Tube All Sizes (Iso9001, Ce Approved& Gmp Certified)) , K-90 Catheter ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula All Sizes, Single Unit (Iso 9001,Ce Approved& Gmp Certified) , Karman/ Mtp Cannula No. 6, Single Unit ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula No. 7, Single Unit ( (Isi/Iso/Ce Certified)) , Karman/ Mtp Cannula No. 8, Single Unit ( (Isi/Iso/Ce Certified)) , Kellys Pad (Isi/Iso/Ce Certified) , Kurta, Petticoat Sets Large Size , Green Strip , Lacrymal Cannula ( (Isi/Iso/Ce Certified)) , Lacrymal Cannula ( Romsons) , Lead Goggle ( (Isi/Iso/Ce Certified)) , Leuco Reduction Blood Filter Set For Blood Bank Use , Legaclip Size Lt 300 ( (Isi/Iso/Ce Certified)) , Legaclip Size Lt 400 ( (Isi/Iso/Ce Certified)) , Legging Each Leg Poplin 40 X 40 Cms. Green Color Bottom Closed , Lense Cleaner Paper ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 16G X 1.5 (1.6 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 18G X 1.5 (1.25 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Long G Sterile Single Use NeedleS 21G X 1.5 (0.8 X 38 Mm) ( (Isi/Iso/Ce Certified)) , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 15 Cm X 15 Cm (3 Foils In Each Box) ( (Isi/Iso/Ce Certified)) , Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 6 Cm X 11 Cm (3 Foils In Each Box) ( (Isi/Iso/Ce Certified)) , Malicoat Catheter 4 Wings ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 10X12 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 12X15 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 14X14 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 14X17 ( (Isi/Iso/Ce Certified)) , Medical X-Ray Films(1X50) 8X10 ( (Isi/Iso/Ce Certified)) , Mekentosh Rubber Per Meter (Iso9001& Isi Standard) , Merocel Nasal Dressing 10 cement concrete ( (Isi/Iso/Ce Certified)) , Merocel Nasal Dressing 8 cement concrete ( (Isi/Iso/Ce Certified)) , Micro Drip Set(Iso9001,Ce&Gmp Approved) , Micropore 1/2 ( (Isi/Iso/Ce Certified)) , Micropore/Surgical Paper Tape 25Mm X 9.1Mtr.(Iso,Ce& Gmp Certified) , Micropore/Surgical Paper Tape 50Mm X 9.1 Mtr.(Iso9001,Ce& Gmp Certified) , Micropore/Surgical Paper Tape 75Mm X 9.1 Mtr.(Isi/Iso/ Ce Marked) , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 5X 6 Cm ( (Isi/Iso/Ce Certified)) , Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 7X 9 Cm ( (Isi/Iso/Ce Certified)) , Mr Cannula All Sizes ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 5 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 6 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 7 ( (Isi/Iso/Ce Certified)) , Mr Cannula No. 8 ( (Isi/Iso/Ce Certified)) , Mucous Suction Trap ( (Isi/Iso/Ce Certified)) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 10Cm X 15 Cm Oval (1 Foil In Each Box) For Lap Of Hernia ( (Isi/Iso/Ce Certified)) , Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 15Cm X 15 Cm Square (1 Foil In Each Box) For Lap Of Hernia ( (Isi/Iso/Ce Certified)) , N-95 Masks ( (Isi/Iso/Ce Certified)) , Nasal Prongs (Paeditric) ( (Isi/Iso/Ce Certified)) , Nasal Prongs (Neonantal) ( (Isi/Iso/Ce Certified)) , Nasal Prongs Term & Preterm Single Patient Use With Twin Bore Nasal Pronges Sets, Extra Soft Medical Grade Nasal Tips ( (Isi/Iso/Ce Certified)) , Nebulisation Set (Mask With Tubing With Chamber (Adult ) ( (Isi/Iso/Ce Certified)) , Nebulisation Set (Mask With Tubing With Chamber (Paediatric ) ( (Isi/Iso/Ce Certified)) , Negative Suction Catheter ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No. 16 ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No.14 ( (Isi/Iso/Ce Certified)) , Negative Suction Drain No.18 ( (Isi/Iso/Ce Certified)) , Niv Mask (Vented With Full Face Mask) , Nrm Mask With Reservior Bag( (Isi/Iso/Ce Certified)) , Nsv Set ( (Isi/Iso/Ce Certified)) , Opsite Eye Drape Sheet 70 Cm X 70 Cm ( (Isi/Iso/Ce Certified)) , Opsite Eye Drape Sheet 70 Cm X 70 Cm ( Appasamy) , Ortho Cotton Roll 15Cmx3mm ( (Isi/Iso/Ce Certified)) , Ot Gown Poplin Length 130 X 135 Cms ArmS Length 58 X 60 Back Open Type With Provision Of Tying With String At Back Arm Should Have Elasting Cuff Or Cord For Tying At Cuff End. The Inside Of Gown Should Be Inter Lock So That There Are No Loose Threads ( (Isi/Iso/Ce Certified)) , Ot Linen Cotton White 88X88 Cm. With Hole Size 9 X 10 Cm. In Centre And Should Be Folded And Stitched So There Are No Loose Ends. ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 130 X 180 (With Circular Hole Of Size 10 Diameters In Centers Green Color) ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 140 X 210 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 140 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 140 (With Circular Hole Of Size 10 Diameters In Centers Green Color) ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 90 ( (Isi/Iso/Ce Certified)) , Ot Linen Poplin- Green Color, Size : 90 X 90 (With Oval) ( (Isi/Iso/Ce Certified)) , Ot Sponges With Radio-Opaque Thread (With 8 Layers 30 Cm X 30 Cm ) ( (Isi/Iso/Ce Certified)) , Oxygen Connector Both Side Tube ( (Isi/Iso/Ce Certified)) , Oxygen Mask Adult ( (Isi/Iso/Ce Certified)) , Oxygen Mask Medium ( (Isi/Iso/Ce Certified)) , Oxygen Mask Ped. ( (Isi/Iso/Ce Certified)) , Oxygen Tubing, Suction Tubing (Different Colours) ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Adult ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Medium ( (Isi/Iso/Ce Certified)) , Oxygen Venti-Mask (Pvc/Disposable)Paed. ( (Isi/Iso/Ce Certified)) , Paraffin Gauze , Patient Identification Band Adult Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Patient Identification Band Mother & Child Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Patient Identification Band Paediatric Size (Different Colours) ( (Isi/Iso/Ce Certified)) , Pciol- Non-Foldable (All Powers As Per Requirement) (Appasamy) , Pedeatrics Iv Drip Set With Air Vent ( (Isi/Iso/Ce Certified)) , Pedia Set ( (Isi/Iso/Ce Certified)) , Picc Line 24 G, 28 G ( (Isi/Iso/Ce Certified)) , Pillow Cover Cotton Size:48 X 70 Cm, Color - Blue , Pillow Cover Cotton Size:48 X 70 Cm, Color - Green , Pillow Cover Cotton Size:48 X 70 Cm, Color - Indigo , Pillow Cover Cotton Size:48 X 70 Cm, Color - Orange , Pillow Cover Cotton Size:48 X 70 Cm, Color - Peach , Pillow Cover Cotton Size:48 X 70 Cm, Color - Violet , Pillow Cover Cotton Size:48 X 70 Cm, Color - White , Pillow Cover Cotton Size:48 X 70 Cm, Color - Yellow , Plaster Of Paris Bandages 10 Cm X 2.7 Mtrs ( (Isi/Iso/Ce Certified)) High Strength , Plaster Of Paris Bandages 15 Cm X 2.7 Mtrs ( (Isi/Iso/Ce Certified)) High Strength , Plaster Spatula ( (Isi/Iso/Ce Certified)) , Pmo Line ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglactin (Plain) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body ( (Isi/Iso/Ce Certified)) , Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle ( (Isi/Iso/Ce Certified)) , Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting ( (Isi/Iso/Ce Certified)) , Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied ( (Isi/Iso/Ce Certified)) , Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied ( (Isi/Iso/Ce Certified)) , Posterior Chamber Pmma Iol Optical Diameter 5.25Mm , Overall Length 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +1.0 Ds To +30 Ds ( Appasamy)) , Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +1.0 D To +30 D ( Appasamy) , Ppe Kits ( (Isi/Iso/Ce Certified)) , Prolene Mesh 3X6 ( (Isi/Iso/Ce Certified)) , Prolene Mesh 4X6 ( (Isi/Iso/Ce Certified)) , Prolene Mesh 6X6 ( (Isi/Iso/Ce Certified)) , Quadruple Blood Bags 450 Ml ( (Isi/Iso/Ce Certified)) , Reverse Pervention Syringe 10 Ml 3 Pc. ( (Isi/Iso/Ce Certified)) , Reverse Pervention Syringe 5 Ml 3 Pc. ( (Isi/Iso/Ce Certified)) , Ryles Tube 10 ( (Isi/Iso/Ce Certified)) , Ryles Tube 12 ( (Isi/Iso/Ce Certified)) , Ryles Tube 14 ( (Isi/Iso/Ce Certified)) , Ryles Tube 16 ( (Isi/Iso/Ce Certified)) , Ryles Tube 8 ( (Isi/Iso/Ce Certified)) , Ryles Tube All Sizes ( (Isi/Iso/Ce Certified)) , Sanitary Napkin ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 22 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 23 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 24 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. 26 ( (Isi/Iso/Ce Certified)) , Scalp Vein Set No. All Sizes ( (Isi/Iso/Ce Certified)) , Short G Sterile Single Use NeedleS 21G X 1.0 (0.8 X 25 Mm) ( (Isi/Iso/Ce Certified)) , Side Port 15 Degree (Antiglare) Green Blade (Appasamy) , Side Port 45 Degree (Antiglare) Green Blade (Appasamy) , Silk Sutupak (Non Absorable Black Braided Silk Suture) Usp 1, 2* 75 Mm , 1/2 Circle R B Needle ( (Isi/Iso/Ce Certified)) , Silk Sutupak Usp 1, 75 Cm ( (Isi/Iso/Ce Certified)) , Silk Suture Usp 0, 76Cm X 45 Mm , 3/8 Circle Type Of Needle- Reverse Cutting ( (Isi/Iso/Ce Certified)) , Silk Suture Usp 3-0, 90 Cm X 16 Mm , 3/8 Circle Type Of Needle- Cutting ( (Isi/Iso/Ce Certified)) , Silk Usp 4-0, With Cutting Needle ( (Isi/Iso/Ce Certified)) , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) ( (Isi/Iso/Ce Certified)) , Single Blood Bags 350 Ml ( (Isi/Iso/Ce Certified)) , Skin Stapler Standard ( Single Unit) ( (Isi/Iso/Ce Certified)) , Skin Traction Set Small Size ( (Isi/Iso/Ce Certified)) , Small Cotton Rolls For Isolation Isi/ Iso/Ce/Marked(Length-37Mm, Dia-8-10Mm) , Soft Roll Dressing (Cast Padding) 4 ( (Isi/Iso/Ce Certified)) , Soft Roll Dressing (Cast Padding) 6 ( (Isi/Iso/Ce Certified)) , Spc Set (Suprapubic Catheter Set) ( (Isi/Iso/Ce Certified)) , Spinal Needle 23 ( (Isi/Iso/Ce Certified)) , Spinal Needle 25 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 18 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 22 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 24 ( (Isi/Iso/Ce Certified)) , Spinal Needle No. 26 ( (Isi/Iso/Ce Certified)) , Sterile Cotton Pad Packed ( (Isi/Iso/Ce Certified)) , Sterile Gauze Piece Packed ( (Isi/Iso/Ce Certified)) , Sterile Single Use NeedleS 23G X 1 (0.6 X 25 Mm) ( (Isi/Iso/Ce Certified)) , Suction Catheter No. 10 , Single Unit ( (Isi/Iso/Ce Certified)) , Suction Catheter No. 16 , Single Unit ( (Isi/Iso/Ce Certified)) , Suction Cathetor No. 12 ( (Isi/Iso/Ce Certified)) , Suction Cathetor No. 14 ( (Isi/Iso/Ce Certified)) , Suction Plain Catheter No. , 8 Disposable Pyrogen Free ( (Isi/Iso/Ce Certified)) , Suction Plain Catheter No. 6, Disposable Pyrogen Free ( (Isi/Iso/Ce Certified)) , Suction Set ( (Isi/Iso/Ce Certified)) , Suction Tips (Different Sizes No: 2, 3, 4) ( (Isi/Iso/Ce Certified)) , Surgical Blades 21 ( (Isi/Iso/Ce Certified)) , Surgical Blades 24 ( (Isi/Iso/Ce Certified)) , Surgical Blades11 ( (Isi/Iso/Ce Certified)) , Surgical Blades15 ( (Isi/Iso/Ce Certified)) , Surgical Blades20 ( (Isi/Iso/Ce Certified)) , Surgical Blades23 ( (Isi/Iso/Ce Certified)) , Surgical Stiching Needle All Sizes (Doctor) ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Monofilament) 70 Cm X 31 Mm, Size -2-0, ½ Circle Round Bodied Needle ( (Isi/Iso/Ce Certified)) , Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle ( (Isi/Iso/Ce Certified)) , Suture Catgut 2 No Round Body Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Coated Polyester No. 5 ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 26 Mm, Size -3-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 30 Mm, Size -2-0, 1/2 Circle Round Body Needle ,3 Metre ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -1-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 90 Cm X 30 Mm, Size -0, 1/2 Circle , Heavy Taper Cut Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) , Size -3-0, 1/2 Circle R B Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) ,1.5 Metre , 76 Cm X 16 Mm, Size -4-0, 3/8 Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) ,2 Metre , 90 Cm X 26 Mm, Size -3-0, 3/8 Circle Reverse Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 2Metre , 90 Cm X 16 Mm, Size -3-0, 3/8 Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Nylon, Usp 1-0 , Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Suture Nylon, Usp 2-0 , Circle Cutting Needle ( (Isi/Iso/Ce Certified)) , Tegaderm 2, 3/8 Inch*2.3/4 Inch 6*7 Cm Tegaderm Tm Films Iv Transparent Film Iv Transparent Film Dressing Style(Latex Free) ( (Isi/Iso/Ce Certified)) , Tegaderm Water Proof Dressing ( (Isi/Iso/Ce Certified)) , Temephos 50% Larvicide As Per Standard Of Latest Govt. Guidelines ( (Isi/Iso/Ce Certified)) , Thera Bands (All Colour) ( (Isi/Iso/Ce Certified)) , Three Way Canula , Towel 56 X 115 Cms. White Color, Soft , Full Size, Sperior Quality , Tracheostomy Tubes, Size 28 (Mettalic) ( (Isi/Iso/Ce Certified)) , Tracheostomy Tubes, Size 30 (Mettalic) ( (Isi/Iso/Ce Certified)) , Tracheostomy Tubes, Size 32 (Mettalic) ( (Isi/Iso/Ce Certified)) , Triple Blood Bags 450 Ml( (Isi/Iso/Ce Certified)) , Triple Blood Bags With Sagm 450 Ml ( (Isi/Iso/Ce Certified)) , Triple Layer Mask ( (Isi/Iso/Ce Certified)) , Triple Layer Single Piece Disposable Mask ( (Isi/Iso/Ce Certified)) , Triway (Three Way Stop Clock) Lipid Resistant Pyrogen Free, Sterile, Latex Free ( (Isi/Iso/Ce Certified)) , Ultrasound Jelly 200 Ml Bottle ( (Isi/Iso/Ce Certified)) , Umbilical Catheter No. 5, (5 Fr Length 37 Cm, -31Ml/Min Pvc ( (Isi/Iso/Ce Certified)) , Umbilical Catheter No. 6 (6 Fr Length 37 Cm, -31Ml/Min Pvc ( (Isi/Iso/Ce Certified)) , Umbilical Cord Cutting Scissor ( (Isi/Iso/Ce Certified)) , Uretheral Catheter ( R-90) , Under Pad/ Molinea Sheet , Urine Bag 2000Ml ( (Isi/Iso/Ce Certified)) Rate Of Single Piece , Uro Bag (Neonates)- 100 Ml ( (Isi/Iso/Ce Certified)) , Uro Bag (Paed.) ( (Isi/Iso/Ce Certified)) , Ventuary Mask ( (Isi/Iso/Ce Certified)) , Yankur Suction Set , Zigzag Ortho Cotton Soft Roll 4 Inches 100 Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 4 Inches 100 Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 6 Inches 100Gm.( (Isi/Iso/Ce Certified)) , Zigzag Ortho Cotton Soft Roll 6 Inches 300Gm.( (Isi/Iso/Ce Certified)) , Absolute Alcohol 70% 500Ml (Isi/Iso/Ce Certified)Rate Of One Bottle , Absolute Ethanol 99.9% Pure (Testing Solution) 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Acetone 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Albumin Kit 5X50ml (Isi/Iso/Ce Certified)Rate Of One Pack , Alkaline Phosphatase Kit Liquix-M 6X6 Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Amylase Kit 4*10Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Amylase Kit 6*6Ml (Isi/Iso/Ce Certified)Rate Of One Pack , Anti A+B+D Igg/Igm+ Ab 4 X 12 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Reagents Anti-Ab Serum 1X5 Ml ( (Isi/Iso/Ce Certified)) , Anti Ab 1 X 10Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti Abd Kit 10 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti-A, Anti-B. Anti- D Sera A Pack Of 1X10 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti D Igg/Igm 1 X 10Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti D Anti Sera (Monocolonal) 1 X 5Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Anti-A1 (Lectin) Serum 1X5 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Antihuman Globulin Serum1x5 Ml ( (Isi/Iso/Ce Certified))Rate Of One Pack , Antibiotic Zone Scale , Aso Test 1X100 Test ( (Isi/Iso/Ce Certified))Rate Per Pack Of 100 , Aso Test Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Bacillocid (Dimethanol And Glutaraldehyde Conc.) Sterilization Slountion, 500Ml , Balance Salt Solution (Bss Solution For Eye) Clearsol 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Bilirubin Kit 4X60ml ( (Isi/Iso/Ce Certified))Rate Per Kit , Bio Medical Waste Dustbin Trolley With Frame 16 Litre (3 Bin Set) Ss Heavy Duty Frame (Isi/Iso/Ce Certified) , Bio Medical Waste Dustbin Trolley With Frame 16 Litre (4 Bin Set) Ss Heavy Duty Frame (Isi/Iso/Ce Certified) , Bio Medical Waste Dust Bin 10 Ltr Plastic (First) Body (Blue Black Yellow Red) ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 10 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 20 Ltr Plastic (First) Body (Blue Black Yellow Red) , Bio Medical Waste Dust Bin 20 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 32 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Medical Waste Dust Bin 50 Ltr Plastic (First) Body (Blue Black Yellow Red) Foot Operated ( (Isi/Iso/Ce Certified)) , Bio Waste Poly Bag Hd/Ldpe Bag As Per Bmw Rules 2016 Thickness More Than 50 Micron/200 Gz, Non-Chlorinated,Ist Quality/Fresh Material With Printing Bio Hazard Logo,Hospital Use And Haryana Govt Supply Not For Sale (Yellow, Red, Black, Blue) Size-14X17/19X26/25X38/24X24 All Sizes (Per Kg) , Bio Hazard Sticker 4.5X4 Cm. Rate Per Sticker , Bleaching Powder 1 Kg Packing Grade 1 (Isi/Iso/Ce Certified) Rate Of 1 Kg.,Shelf Life More Than 6 Months , Bleaching Powder 25 Kg Packing Grade 1 Hdpe Bag Powder Form Minimum Chlorine Availability 34% (Isi/Iso/Ce Certified) Rate Of 25 Kg. Bag ,Shelf Life More Than 6 Months , Bloating Paper For Lab Use ( (Isi/Iso/Ce Certified) Rate Per Bloating Paper , Blood Agar100gm( (Isi/Iso/Ce Certified) Rate Of 100 Gm Pack , Blood Culture Bottle 50 Ml (Isi/Iso/Ce Certified))Rate Of One Bottle , Blood Glucose Kit 2X200ml ( (Isi/Iso/Ce Certified) Rate Per Pack 2*200Ml , Blood Grouping Rapid Card ( (Isi/Iso/Ce Certified) Rate Per Card , Blood Lancet 1 X 50 ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 50 Lancets , Blood Lancet 1 X 100 ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Lancets , Blood Urea Kit 20Mlx5 ( (Isi/Iso/Ce Certified))Rate Per Kit , Borosil Reagent Bottle ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Bovine Albumin 22% Sol. A Pack Of 1X10 Ml( (Isi/Iso/Ce Certified))Rate Of One Pack , Brain-Heart Infusion Agar 100Gm ( (Isi/Iso/Ce Certified)) Rate Of 100 Gm. Pack , Brain-Heart Infusion Broth 100Gm ( (Isi/Iso/Ce Certified) Rate Of 100 Gm. Pack , Capillery Tubes For Bt/Ct A Pack Of 1X100 Rate Per Pack Of 100 Capillary Tubes , Carbol Fuschin Stain (Ziehl-Neelsen) Hi-Media , Carbol Fuchsin Powder 25 Gm (Isi/Iso/Ce Certified)) , Carbolic Acid 400Gm.(Isi/Iso/Ce Certified)) , Cedar Wood Oil 125 G ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Cefoxitin For Swab Culture Rate Per Unit , Cello Tape (White) Size- 2 Inch Rate Of Single Cello Tape , Cello Tape (Brown) Size- 4 Inch Rate Of Single Cello Tape , Chlorhexidine Gluconate 4% Spray 60Ml ( (Isi/Iso/Ce Certified) Rate Per 60Ml Pack , Chlorhexidine Gluconate+ Cetrimide Antiseptic Liquid 250 Ml Bottle ( (Isi/Iso/Ce Certified) Rate Of One Bottle , Chlorine 0.5 Gm Pellets (Drinkwell) Packing 1000 Fda/ Iso/Gmp Certified , Rate Of 1000 Pellets, Shelf Life At Least One Year , Chocolate Agar 100Gm ( (Isi/Iso/Ce Certified) Rate Per Pack , Cholestrol Kit 5 X 20Ml ( (Isi/Iso/Ce Certified) Rate Per Pack , Citrate Medium 100Gm (Isi/Iso/Ce Certified) Rate Per Pack , Cleaning Solution Kit For Easylyte Na/K/Ck Rate Per Pack , Cled Medium 100Gm ( (Isi/Iso/Ce Certified) Rate Of 100Gm. , Coplin Jar Rate Of Single Jar , Copper Sulphate 500Gm ( (Isi/Iso/Ce Certified) Rate Of 500 Gm. Pack , Cover Slips Square A Pack Of 20X10 Gm Blue Star Rate Of Single Pack , Coverslip (English Glass) Size: 22 X 50Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Coverslip (English Glass) Size: 24 X 50Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Coverslip (English Glass) Size: 24 X 60Mm ( (Isi/Iso/Ce Certified))Rate Per Slip , Cpkmb Kit 2*8 /2*2 Ml( (Isi/Iso/Ce Certified)) Rate Per Pack , Creatinine Kit 4X60ml ( (Isi/Iso/Ce Certified))Rate Per Pack , Crom Agar 100Gm( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Kit 1X10 Ml ( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Kit Slide Method Qualitative ( (Isi/Iso/Ce Certified))Rate Per Pack , Crp Rapid Card ( (Isi/Iso/Ce Certified)) Rate Per Card , Crystal Violet 100 Gm. , Culture Tube With Swab Stick Rate Per Culture Tube With Swab Stick , Cyphenothrin 5% Ecs (Insecticide/Adulticide For Fogging) As Per Govt Guidelines 1 Litre (Bayer) , Decalcifying Reagent ( (Isi/Iso/Ce Certified)) , Deltamethrin 2.5%, Wp 25 Kg , Dengue Elisa Kit 48 Test ( Isi/Iso/Ce Certified))Rate Per Pack , Dengue Elisa Kit 48 Test J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Dengue Elisa Kit 48 Test ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) Rate Per Pack , Dengue Elisa Kit 96 Test ( (Isi/Iso/Ce Certified)) , Dengue Elisa Kit 96 Test ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Per Pack , Dengue Elisa Kit 96 Test J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Dengue Rapid Test Card Ns1 (Single Test) ( (Isi/Iso/Ce Certified)) Rate Per Card , Diamond Pencil Marker Standard Quality Rate Per Piece , D - Dimer Vial (Isi/Iso/Ce Certified) , Distilled Water (Dionised) 1 Litre ( (Isi/Iso/Ce Certified))Rate Per Pack , Distilled Water (Zero Tds) 5 Litre ( (Isi/Iso/Ce Certified))Rate Per Pack , Dpx Mounting Media 250Ml Each , Dropping Bottle 100Ml ( (Isi/Iso/Ce Certified)) , Dropping Bottle 250Ml ( (Isi/Iso/Ce Certified)) , Dodecylbispropylene Triamine 9.2Gm, Didecyldimethyl Ammonium Chloride 13.0 Gm For Fogging (Isi/Iso/Ce Certified) , Durhams Tube A Pack Of 1X100 Rate Per Pack , Drumsticks (Isi/Iso/Ce Certified) , Edta 17% Paste Form ( (Isi/Iso/Ce Certified)) , Eeg Paste , Elisa Covid -19 Kit A Pack Of 96 Tests (As Per Icmr/ Niv) (Isi/Iso/Ce Certified)) Rate Per Pack , Elisa Covid -19 Kit A Pack Of 48 Tests (As Per Icmr/ Niv) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Elisa Hbv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hbv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hbv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hbv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hcv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hcv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hcv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hcv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hiv Kit 96Test 3Rd Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hiv Kit 96Test 3Rd Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Elisa Hiv Kit 96Test 4Th Generation ( (Isi/Iso/Ce Certified))Rate Per Pack , Elisa Hiv Kit 96Test 4Th Generation J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor Rate Per Pack , Eosin Powder 1X25 Gm. Rate Per Pack (Isi/Iso/Ce Certified) , Esr Pipette Rate Per Pipette (Isi/Iso/Ce Certified) , Ethanol Spray 70% , Fields Stain ( (Isi/Iso/Ce Certified)) , Filter Paper (Whatman)(A Pack 1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Filter Paper (Whatman)(A Pack 1X50) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Filter Paper No. 1 (A Pack 1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Fluorescein Stain ( (Isi/Iso/Ce Certified)) , Fobt Card ( (Isi/Iso/Ce Certified) Rate Per Card , Formalin Solution 37-40% Buffered 500Ml ( (Isi/Iso/Ce Certified)) Rate Of One Bottle , Formalin Solution 37-40% Buffered 5 Litre ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Funnel 3 Inch ( (Isi/Iso/Ce Certified))Rate Of One Funnel , GeimsaS Stain Solution Bottle ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Giemsa Stain ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glacial Acetic Acid 3.5% Solution 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glass Beaker 50 Ml (Borosil) Rate Of Single Beaker , Glass Beaker 100 Ml (Borosil) Rate Of Single Beaker , Glass Beaker2 50 Ml (Borosil) Rate Of Single Beaker , Glass Beaker 500 Ml (Borosil) Rate Of Single Beaker , Glass Funnel (Borosil) Rate Of Single Funnel , Glass Cleaner 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Glass Slide Cabinet (1000 Slide Storage Capacity) ( (Isi/Iso/Ce Certified)) , Glass Slides , A Pack Of 50 Slides ( (Isi/Iso/Ce Certified)) Rate Of 50 Slides Pack , Glutraldehyde Solution 2 % - 2.5 %, 1 Ltr (Isi/Iso/Ce Certified) , Glucometer (Dr.Morpen ,Model-Bg03) , Glucometer Strips (Dr.Morpen ,Model- Bg03) ( Rate Per Strip) , Glucometer Cell (Dr.Morpen ,Model-Bg03) , Glucometer (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) , Gluco Strips (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) ( Rate Per Strip) , Glucometer Cell (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor) , Glucometer (Accu Chek) , Gluco Strips (Accu Chek) A Pack Of 2X50 Strips ( Rate For Pack Of 2X50 Strips) , Glucometer Cell (Accu Chek) , Glycerol 100Ml (Isi/Iso/Ce Certified) , Graduated Glass Measuring Cylinder ( 1000Ml) ( (Isi/Iso/Ce Certified)) , Graduated Glass Measuring Cylinder (500Ml ) ( (Isi/Iso/Ce Certified)) , Gram Stain 100Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Gram Stain Kit ( (Isi/Iso/Ce Certified) Rate Of One Kit , Gram Stain Kit ( Hi-Media))Rate Of One Kit , Hand Sanitizer 400 Ml (Isi/Iso/Ce Certified) , H& E Stain (Harris) Powder Hi-Media Rate Of One Pack , Haemoglobin Meter (Round) Manual ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter (Sqaure) Manual ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter Glass Tube (Round) ( (Isi/Iso/Ce Certified)) , Haemoglobin Meter Glass Tube (Sqaure) ( (Isi/Iso/Ce Certified)) , Haemostatic Tournique (Isi/Iso/Ce Certified) , Hav Card ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hb Meter Digital Portable With One Year Replacement Warranty ( Sensa Core) , Hb Meter Strips (Sensa Core Hb Digital Portable Meter ) Rate Per Strip , Hb Meter Digital Portable With One Year Replacement Warranty (Mission) , Hb Meter Strips ( Mission) Rate Per Strip , Hb Pipette ( (Isi/Iso/Ce Certified))Rate Of One Pipette , Hba1c Turbosmart ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag + Hiv + Hcv Rapid Card (Combo) ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag 96 Test Elisa ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Hbsag 96 Test Elisa ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor )) Rate Of One Kit , Hbsag Card ( (Isi/Iso/Ce Certified)) Rate Of One Card , Hbsag Card ( Aspen) Rate Of One Card , Hbsag Tridot Rapid Card ( J.Mitra)) Rate Of One Card , Hbsag Card Extra Sensitive ( (Isi/Iso/Ce Certified)) , Hcl N/10 500Ml ( (Isi/Iso/Ce Certified)) Rate Of One Bottle , Hcl Concentrated 500 Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Hcv & Hiv Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Rapid Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Rapid (Single Test Card) ( Aspen))Rate Of One Card , Hcv Tridot ( (Isi/Iso/Ce Certified))Rate Of One Card , Hcv Tridot ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Of One Card , Hcv, Hiv, Hbsag, Syphilis Card 4 In 1 ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv 1/2 Card ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Card Retroquic Flow Through Method ( (Isi/Iso/Ce Certified)) , Hiv Rapid (Single Test Card) ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Rapid (Single Test Card) ( Aspen))Rate Of One Card , Hiv Tridot ( (Isi/Iso/Ce Certified))Rate Of One Card , Hiv Tridot ( J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Of One Card , Hiv Complete Safe Kit ( (Isi/Iso/Ce Certified))Rate Of One Safe Kit , Hiv+Syphillis Combo ( (Isi/Iso/Ce Certified)) , Holder Lancet (Single Use/Single Packing)) ( (Isi/Iso/Ce Certified))Rate Of One Holder Lancet , Ice Gel Pack 100Gram Rate Of Single Ice Gel Pack , I.O Dye (Rhex Id Dye) Each (Indigo Blue Dye)Rate Of Single Dye , Immersion Oil For Microscopy, 100X Lens (Heavy Grade) A Pack Of 30Ml(( (Isi/Iso/Ce Certified))Rate Of One Pack , Immersion Oil For Microscopy, 100X Lens A Pack Of 30Ml (Hi-Media))Rate Of One Pack , Isopropyl Alcohol 500 Ml For Lab Use ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Isopropyl Alcohol Based Handwash Solution 5 Ltr. , Isopropyl Alcohol Based Handwash Solution 500 Ml , Jsb Stain I 250Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Kimberlay Clark Tissue Paper Rate Of One Packet , Lead Pencil / Cautery Pencil (Isi/Iso/Ce Certified) , Leishman Stain ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Liquid Hand Wash Soap 5 Litre (Safe For Skin)Isi/Iso/Gmp Certified , Macconkey Brouth 500Gm (Purple) Rate Of Pack 500Gm. , Macconky Agar 100Gm ( (Isi/Iso/Ce Certified))Rate Of Pack 100Gm. , Malicot Tube 28 No. Rate Of One Tube (Isi/Iso/Ce Certified) , Malaria Antigen Card (Isi/Iso/Ce Certified))Rate Of One Card , Malaria Antigen Card J.Mitra ( (Isi/Iso/Ce Certified))Rate Of One Card , Malaria Parasite Kit ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Malaria Pcr Kit Himedia( (Isi/Iso/Ce Certified)) Rate Of One Kit , Malaria Pan Elisa 96 Test ( (Isi/Iso/Ce Certified)) Rate Of One Kit Of 96 Tests , Malathion 50% Ec, 1 Ltr (Isi/Iso/Ce Certified) , Malathion Technical 95%, 25 Kg (Isi/Iso/Ce Certified) , May Grunwald Stain Solution Bottle 125Ml( (Isi/Iso/Ce Certified))Rate Of One Bottle , Mct Rack ( (Isi/Iso/Ce Certified)) , Methanol 500Ml ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Methylene Blue Alkaline ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Mgg Stain ( (Isi/Iso/Ce Certified)) , Micro Centrifuge Tube 2Ml Sterile A Pack Of 1X500 (Tarson ) Rate Per Pack Of 500 , Microcuvettes (Model- Haemocue Hb 301, Hb Meter), ( Rate Per Single Microcuvettes) , Micro Pipette 0- 50 Microlitre ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipette 10 Ul To 100 Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipette 2 Ul To 20 Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Pipettes 20Ul To 200Ul ( (Isi/Iso/Ce Certified)) Rate Of One Pipette , Micro Slides ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Microscope Optical Lens Cleaning Solution ( (Isi/Iso/Ce Certified)) Rate Of One Pack , Microtips (2 Ul-200 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Of One Pack Of 1000 , Microtips 0 - 200 Microliters (Small) A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips 20 - 1000 Microliters (Large)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips 200 Ul To 1000 Ul A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Microtips Box (2 Ul-200 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Of Per Pack Of 1000 , Microtips Box (200 Ul-1000 Ul)A Pack Of 1X1000 Microtips( (Isi/Iso/Ce Certified))Rate Per Pack Of 1000 , Mi-Fog(Disinfectant Liquid For Fogging Machine) Benzalkonium Chloride 13.6%W/V,Didecyl Dimethyl Ammonium Chloride 13%W/V,Poly Hexa Methlene Biguanide Hcl 5.0%W/V, 5Th Generation Qac For Ot,Icu,Nicu& Other Critical Areas , 1 Litre , Mineral Trioxide Aggregate Isi/ Iso/Ce/Marked. Rate Of One Pack , Mini-Shaker For Immunology ( (Isi/Iso/Ce Certified))Rate Of One Pack , Mx Vial (Montux Vial) Rate Per Vial , Muller Hilton Agar 100Gm ( (Isi/Iso/Ce Certified))Rate Of One Pack , Muller Hilton Agar Plate ( (Isi/Iso/Ce Certified))Rate Of One Plate , Multi Drug Test Kit (Panel Of 6) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (8 Channal) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (8 Channal Variable Value 2-20Ul) Thermo Fischer ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (12 Channal) ( (Isi/Iso/Ce Certified)) , Multichannel Pipette (12 Channal) Thermo Fischer ( (Isi/Iso/Ce Certified)) , Multidrug Test Kit Of 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Of One Kit , Multidrug Test Card 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Of One Card , Multi-Sample Vacutainer Luer-Lok Access Adapters ( (Isi/Iso/Ce Certified)) , Multi-Sample Vacutainer Routine Blood Collection Sterile Single Use Needles (21G X 1Inch)(0.8 X 25/32Mm) ( (Isi/Iso/Ce Certified)) , Multi-Sample Vacutainer Routine Blood Collection Sterile Single Use Needles (22G X 1Inch)(0.7 X 25/32Mm) ( (Isi/Iso/Ce Certified)) , Nutrient Agar Media 100 Gm ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 100X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 10X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , Objective ( Oil Immersions 40X) ( (Isi/Iso/Ce Certified))Rate Of One Pack , O- Toludine Reagent (Isi/Iso/Ce Certified) A Pack Of 500Ml Rate Per Bottle , Pap Stain Kit (Isi/Iso/Ce Certified) Rate Per Kit , Pap Stain Kit J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor (Isi/Iso/Ce Certified) Rate Per Kit , Paraffin Wax Small Cubes ( (Isi/Iso/Ce Certified))Rate Of One Pack , Parafilm Width2 Inch & Length 250 Feet ( (Isi/Iso/Ce Certified))Rate Of One Pack , Paraldehyde Solution For Sterlization ( (Isi/Iso/Ce Certified))Rate Of One Pack , Pasteur Pipette(Transfer Pipette) Capacity 1Ml ( (Isi/Iso/Ce Certified)) , Peptone Water 100Gm ( (Isi/Iso/Ce Certified))Rate Of One Bottle , Permanent Marker 10 Pieces Per Pack Black/Blue Colour Rate Per Pack , Petridish Diameter 90Mm* Height 15 Mm Sterile ( (Isi/Iso/Ce Certified)) Rate Of Single Unit , Ph Meter Digital ( (Isi/Iso/Ce Certified)) Rate Per Meter , Ph Paper (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 , Ph Testing Strips For Water Seven Quality Test (1X50) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 50 , Ph Testing Strips For Water Quality Test (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 , Phenol 2% A Pack Of 500 Ml (Isi/Iso/Ce Certified)) Rate Per Pack , Phenol 40% A Pack Of 5 Litre (Isi/Iso/Ce Certified)) Rate Per Pack , Phenol Crystal A Pack Of 500Gram (Isi/Iso/Ce Certified)) Rate Per Pack , Phenyl Surface Disinfectant,Floor Cleaner Liquid 5 Litre , White Colour ( (Isi/Iso/Ce Certified)) , Phenyl Surface Disinfectant,Floor Cleaner Liquid 5 Litre( Black Colour) ( (Isi/Iso/Ce Certified)) , Pipette Shaker ( (Isi/Iso/Ce Certified)) , Plaintube Glass 18*150 Mm, 27 Ml ( (Isi/Iso/Ce Certified)) Rate Of One Glass Tube , Plaintube Plastic 18*150Mm ,27 Ml( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plaintube Plastic ( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plastic Tube For Dengue Testing( (Isi/Iso/Ce Certified)) Rate Of One Plastic Tube , Plastic Container For Storing Buffered Formalin 5Litres ( (Isi/Iso/Ce Certified)) , Plastic Spatula ( (Isi/Iso/Ce Certified)) , Plastic Cane 5 Litre White Rate Per Cane , Plastic Cane 5 Litre Black Rate Per Cane , Plastic Bottle 1 Litre For Tb Programme Rate Per Bottle , Plastic/ Glass Jars For Storage Of Specimens With Fixative (50Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (100Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (200Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (500Ml Capacity) ( (Isi/Iso/Ce Certified)) , Plastic/Glass Jars For Storage Of Specimens With Fixative (1000Ml Capacity) ( (Isi/Iso/Ce Certified)) , Platelet Diluting Fluid ( (Isi/Iso/Ce Certified)) , Potash Alum 1X500gm. Rate Per Pack , Podophylline Resin Solution 10% To 25% ( (Isi/Iso/Ce Certified)) , Pot. Dichromate ( (Isi/Iso/Ce Certified)) , Prefilled Automated Extraction Kits (For Thermo Scientifix For Kingfisher Flex Automated Extraction System ,96 Well) Rt-Pcr Lab , Pregnancy Test Kit ( (Isi/Iso/Ce Certified)) Rate Of Single Kit , Pregnancy Test Card ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Pregnancy Strips ( (Isi/Iso/Ce Certified)) Rate Of Single Strip , Pyrethrum Extract 2% (Isi/Iso/Ce Certified) , Q-Way 6 Inches ,Sterlized Using Ethylene Oxide ( (Isi/Iso/Ce Certified)) , R A Factor Rapid Card ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Ra Factor Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid Afb Stain Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid Antigen Test Card (Covid) ( (Isi/Iso/Ce Certified)) Rate Of Single Card , Rapid Cytochrome/Modified Rapid Leishman Stain ( (Isi/Iso/Ce Certified)) , Rapid Geimsa Stain Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rapid H & E Stain Kit ( (Isi/Iso/Ce Certified)) , Rbc Diluting Fluid ( (Isi/Iso/Ce Certified)) , Ria Vials Glass 1X100(Isi/Iso/Ce Certified)) Rate Of 100 Vials Packing , Ria Vials Plastic 12X40mm 1X500(Isi/Iso/Ce Certified)) Rate Of 500 Vials Packing , Rpr/Vdrl Kit (50 Test Each) ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Rpr/Vdrl Kit (100 Test Each) ( S D Biosensor)Rate Of Single Kit , Rubber Teats Rate Per Piece , Rubber Gloves For Lab Use Rate Per Pair , Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) (Isi/Iso/Ce Certified) , S. Calcium Kit A Pack Of 2X50 Ml( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Cholesterol Kit A Pack Of 5X30ml ( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Phosphorus Kit A Pack Of 2X50ml( (Isi/Iso/Ce Certified))Rate Of Single Kit , S. Protein Kit 5X50 ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Salt Testing Kit ( (Isi/Iso/Ce Certified)) Rate Per Kit , Sample Cups With Lid & Sticker 30Ml ( (Isi/Iso/Ce Certified)) , Saturated Picric Acid Solution ( (Isi/Iso/Ce Certified)) , Sda Agar 100Gm ( (Isi/Iso/Ce Certified)) , Self Polymerizing Acrylic Liquid (Isi/Iso/Ce Certified) , Self Polymerizing Acrylic Powder (Isi/Iso/Ce Certified) Pink , Semen Diluting Fluid ( (Isi/Iso/Ce Certified)) , Serum Pti Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Serum Seperate Tube A Pack Of 1X100 Rate Per Pack , Sgot Kit 20Mlx05 ( (Isi/Iso/Ce Certified)) , Sgpt Kit 20Mlx05 ( (Isi/Iso/Ce Certified)) , Sharp Container 1.5 Litre, White ( (Isi/Iso/Ce Certified)) , Sharp Container 6 Litre, White ( (Isi/Iso/Ce Certified)) , Sharp Container 10 Litre, White ( (Isi/Iso/Ce Certified)) , Slide Mountant Dpx ( (Isi/Iso/Ce Certified)) , Slide Carrying Tray (20 Slide Capacity) ( (Isi/Iso/Ce Certified)) , Slide Labelling Stickers/Tape Roll ( (Isi/Iso/Ce Certified)) , Slide Staining Racks Aluminium( (Isi/Iso/Ce Certified)) , Slide Storage Box (100 Slide Capacity) ( (Isi/Iso/Ce Certified)) , Slide Tissue Adhesive(Hydophillic Slides) (Egg Albumin) ( (Isi/Iso/Ce Certified)) , Sodium Citrate 3.8% A Pack Of 500 Ml Rate Per Pack , Sodium Hypochloride 5% Solution 5 Ltr ( (Isi/Iso/Ce Certified)) , Sod. Hypochloride 400 Ml (Idc) , Sodium Hypochlorite Solution 10% 5 Ltr ( (Isi/Iso/Ce Certified)) , Sodium Phosphate Dibasic (Na2hpo4) Buffer ( (Isi/Iso/Ce Certified)) , Sodium Phosphate Monobasic (Nah2po4) Buffer ( (Isi/Iso/Ce Certified)) , Sodalime Crystal (Isi/Iso/Ce Certified) , Solution Pack For Easylyte Na/K/Cl , Spirit Lamp , Sulphuric Acid Con. 500 Ml ( (Isi/Iso/Ce Certified))Rate Per Bottle , Sulphuric Acid Solution 20% V/V (( (Isi/Iso/Ce Certified)) , Sulphur Powder 1X500gm. Rate Per Pack (Isi/Iso/Ce Certified) , Sputum Cup With Lid & Sticker 30Ml ( (Isi/Iso/Ce Certified)) , Sputum Cup With Lid 50Ml & Sticker ( (Isi/Iso/Ce Certified)) , Sputum Cup Carrier Box( (Isi/Iso/Ce Certified)) , Adhesive Label For Sputum Cup A Pack Of 1X100 Pieces , Surgical Spirit Bp 500Ml ( (Isi/Iso/Ce Certified)) Rate Per Bottle , Surgical Spirit Bp 5Ltr ( (Isi/Iso/Ce Certified))Rate Per Bottle , Sugar Sucrose A Pack Of 500Gm. (Isi/Iso/Ce Certified) , Sugar Maltose A Pack Of 500Gm.(Isi/Iso/Ce Certified) , Swab Sticks 100 Pcs. Rate Of 100 Sticks , Tcbs Agar100gm ( (Isi/Iso/Ce Certified)) , Tds Meter Digital , Rate Per Tds Meter , Test Tube Glass (150 X 16) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Glass (150 X 20) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Glass (80Mmx10mm) A Pack Of 1X12 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Plastic Pack Of 1X48 Tubes ( (Isi/Iso/Ce Certified)) Rate Per Pack , Test Tube Rack 18 Hole (Plastic)(Isi/Iso/Ce Certified) , Test Tube Rack 18 Hole (Ss)(Isi/Iso/Ce Certified) , Test Tube Rack 96 Test Plastic(Isi/Iso/Ce Certified) , Test Tube Rack 96 Test Ss(Isi/Iso/Ce Certified) , Test Tubes Brush (Isi/Iso/Ce Certified) , Thermal Printing Roll For Urine Analyzer And Cbc 57/58Mm Size , Thermol Roll 57Mm ,50Mm Rate Per Roll(Isi/Iso/Ce Certified) , Thermocol Box Size 18.5X12.5X13 Cm. , Thphoid (Igg + Igm) Card ( (Isi/Iso/Ce Certified)) Rate Per Card , Thphoid (Igm) Card ( (Isi/Iso/Ce Certified))Rate Per Card , Tissue Paper Roll Double Ply Length 30 Metres Width 30 10 Cm. Rate Of Single Roll , Tourniquet Superior Quality ( (Isi/Iso/Ce Certified)) Rate Per Piece , Triglyceride Kit 2X50ml Erba Rate Of Single Kit , Triple Sugar Iron Test (Tsi) 100Gm , Trop I Kit A Pack Of ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Troponin Kit ( (Isi/Iso/Ce Certified))Rate Of Single Kit , Tryptan Blue Dye ( (Isi/Iso/Ce Certified)) , Tubes Dispoables 12X100 Mm. A Pack Of 100 Tubes Rate Per Pack , Tube Racks (10 Ml Vials)(Isi/Iso/Ce Certified) , Tube Racks (5Ml Vials)(Isi/Iso/Ce Certified) , Tuberack 18*150 Mm (Isi/Iso/Ce Certified) , Turp Loop ( (Isi/Iso/Ce Certified))(Isi/Iso/Ce Certified) , Twin Bucket 10 Litre Grade One Plastic Body(Isi/Iso/Ce Certified) , Twin Bucket 20 Litre Grade One Plastic Body(Isi/Iso/Ce Certified) , Urease Medium 100Gm ( (Isi/Iso/Ce Certified)) , Uric Acid Kit 5X50ml ( (Isi/Iso/Ce Certified))Rate Of Pack , Urine Containers With Lid & Sticker (50Ml Capacity) ( (Isi/Iso/Ce Certified)) , Urine Containers With Lid & Sticker (50Ml Capacity) A Pack Of 1X100 Non-Sterile ( (Isi/Iso/Ce Certified)) Rate Of Pack , Urine Containers With Lid & Sticker 30Ml Non Sterile ( (Isi/Iso/Ce Certified) , Urine Containers With Lid & Sticker 30Ml Sterile ( (Isi/Iso/Ce Certified) , Urine Droppers 5 Ml ( A Pack Of 1X100) Rate Of Pack , Multisticks Urine Analysis Reagent Strips 2 Parameter(Albumin & Sugar) (1X100) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Multisticks Urine Analysis Reagent Strips 10 Parameter ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Multisticks Urine Analysis Reagent Strips 10 Parameter Bayer ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 100 Strips , Vaccuame Needle ( (Isi/Iso/Ce Certified)) , Vaccutainers Sodium Citrate 3.2% (2.7 Ml) (Non - Vaccum)A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Gel Yellow Cap,A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Lithium Heparin (Green Top) Tube (Non-Vaccum) 6 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Lithium Heparin (Green Top) Tube (Vaccum) 3 Mla Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Needle ( (Isi/Iso/Ce Certified)) , Vacutainer Needle Holder ( (Isi/Iso/Ce Certified)) , Vacutainer Safety-Lok Pediatric Blood Collection Set With Pre-Attached Holder ( (Isi/Iso/Ce Certified)) , Vacutainer Sodium Heparin (Green Top) Tube (Non-Vaccum) 3 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Sodium Heparin (Green Top) Tube (Non-Vaccum) 6 Ml A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Stretch Torniquet ( (Isi/Iso/Ce Certified)) , Vacutainer Tubes Purple/Lavender Topped (K2 Edta) 2 Ml Capacity (Size Of Tube:13 X 75Mm), Vaccum Based Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 0.5 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microtainer/Microcapillary/Mini Blood Collection Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 1 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microcapillary/Mini Blood Collection Tubea Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainer Tubes Violet/Purple/Lavender Topped (K2 Edta) 1.3 Ml Capacity (Size Of Tube:12 X 55/56 Mm), Screw Cap Pediatric Microcapillary/Mini Blood Collection Tube A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Edta (Non -Vaccum) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Edta (Vaccum Tubes) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Florides (Vaccum Tubes) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Plain /Clot Activator A Pack Of 1X100 (Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers (For Pus Collection) Rate Per Vacutainer(Isi/Iso/Ce Certified) , Vacutainers Plain /Clot Activator A Pack Of 1X100 ( Non-Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate (Vaccum Tubes, ) (For Esr 1.6 Ml)( Black Top) A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.2% (2.7 Ml) (Vaccum Tubes) A Pack Of 1X100 (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.8% (Black Top)Vaccum Tube A Pack Of 1X100 ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vacutainers Sodium Citrate 3.8% (Black Top) Tube A Pack Of 1X100 ( Non-Vaccum Tubes) ( (Isi/Iso/Ce Certified)) Rate Per Pack , Vdrl (Syphilis Kit Elisa 96 Test) ( (Isi/Iso/Ce Certified)) Rate Per Kit , Vdrl (Syphilis Kit Elisa 96 Test) (J. Mitra/ Erba/Abbot/ Cal Biotech/ Other Branded/ Sd Bio Sensor)Rate Per Kit , Vdrl Strips A Pack Of 100 Strips (Isi/Iso/Ce Certified)) Rate Per Strip , Vdrl Rapid Card( (Isi/Iso/Ce Certified)) Rate Per Card , Vtm Kit With Oral And Nasal Swab Pair (As Per Icmr Guidelines) Rate Per Vtm Kit , Vtm Media Rate Per Single Piece , Vtm Vial Rack , Wash Bottles Glass 500Ml Rate Per Bottle , Wash Bottles Plastic 500Ml Rate Per Bottle , Water Sample Bottles Glass 250Ml Rate Per Bottle , Water Sample Bottles Glass (Borosil) 250Ml Rate Per Bottle , Water Sample Bottles Glass 500Ml Rate Per Bottle , Water Sample Bottles Glass (Borosil)500Ml Rate Per Bottle , Wbc Diluting Fluid 100 Ml ( (Isi/Iso/Ce Certified)) , White Petroleium Jelly 100 %20 Gm Jar( (Isi/Iso/Ce Certified)) , White Petroleium Jelly 100 % 500 Gm Jar( (Isi/Iso/Ce Certified)) , Widal Kit 5X4 Ml ( (Isi/Iso/Ce Certified))Rate Per Kit , Wooden Tips 6 A Pack Of 1X100 Rate Per Pack , Xylene 1X500ml ( (Isi/Iso/Ce Certified)) Rate Per Pack , Auto Analyser Thermal Paper Role (57 Mmx30m) (Erba) , Automated Extraction Kits (For Thermo Scientifix For Kingfisher Flex Automated Extraction System ,96 Well) Rt-Pcr Lab , Autoclave Biohazard Bag (12X24) ( (Isi/Iso/Ce Certified)) Rate Per Pack Of 1X100 , Autoclave Biohazard Bag (14X19) ( (Isi/Iso/Ce Certified) Rate Per Pack Of 1X100 , Autoclave Biohazard Bag (24X30) ( (Isi/Iso/Ce Certified) Rate Per Pack Of 1X100 , Cryo Vails 1.8 Ml A Pack Of 1X1000 (Tarson) Rate Per Pack Of 1X1000 , Cryo Marker ( (Isi/Iso/Ce Certified)) , Cryo Tags A Pack Of 1X1000 (Tarson) Rate Per Pack Of 1000 , Film Applicator , Genemag Viral Dns/Rna Purification Kit (400 Plate 96 Preps) Rate Per Box , Mct Rack (Tarson) Rate Per Rack , Microseal B Adhesive Seal (Pcr Seal) Biorad ( Rate Of Single Piece) , Pcr Cap Strips A Pack Of 1X120 (Bio-Rad)( Rate Per Pack Of 1X120 ) , Pcr Plates A Pack Of 1X50 (Bio-Rad , Plastic Case Mounted ) ( Rate Of Pack Of 1X50) , Pcr Seals A Pack Of 1X100 (Bio-Rad ) ( Rate Per Pack Of 1X100 )) , Pcr Tube Strips (Bio-Rad) A Pack Of 1X120( Rate Of Pack 1X120) , Qpcr Adhesive Seal ( Thermo / Brand /Biolinkk /Ils) ( Rate Of Single Piece) , Qpcr Plates 96 Well ( Thermo /Brand/ Biolinkk /Ils) , Racked Sterile Filtered Microtips(Low Retention) 1000Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 100Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 10Ul/20Ul Tarson Rate Per Box Of 1X960 , Racked Sterile Filtered Microtips(Low Retention) 200Ul Tarson Rate Per Box Of 1X960 , Rt-Pcr Kits 96 Well Plate (Bio Rad) Rate Per Box , Thermal Printing Roll For Urine Analyzer And Cbc 57/58Mm Size Rate Per Roll , Thermol Roll 57Mm ,50Mm Rate Per Roll , Plastic Pallet ,Hdpe, Size(1200*1000*60 Mm) ( (Isi/Iso/Ce Certified)) , Pm Kit For Di Plant 7-10 Liter Per Hr (Model: 165935) , Am Kit For Di Plant (Model: 165935) , Pm Kit For Em200 , Elite 580 Calibrator 1X3 Ml , 4 Channel Ise Cleaning Solution - 5421 (6X12ml) (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Reagent Pack @35 Spd Cal A-520 Ml/ Cal B-190 Ml (Total 710 Ml)(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada1 X 20 Ml/1 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada Cali1 X 1 M L (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ada Control1 X 1 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Albumin 5 X 22 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Alkaline Phosphatase5 X 22 Ml/5X 6.8 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Amylase 5X11 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Direct 5 X 22 Ml/5X 6.8 Ml(Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Direct Plus 6 X 44 Ml/6 X 12.3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Total 5 X 22 Ml/5X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Bilirubin Total Plus 6 X 44 Ml/6 X 12.3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Calcium (A) 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Chloride 10 X 12 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Cholesterol 5 X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ck Mb 2 X 12 Ml/2X 3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ck Nac 2 X 12 Ml/2X3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Control H (Aso/Rf/Crp) 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Control L (Aso/Rf/Crp) 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Creatinine-Enzymatic 5 X 30 Ml /5 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Creatinine-Jaffe 5 X 44 Ml/5X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Autowash - System Pack 10 X 100 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Norm 4 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Erba Path 4 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Fe 125 R1-4 X 25 Ml, R2-2 X 12.5 Ml Calibrator: 2 X 2 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin 2 X 14.5/2 X 7.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Calibrator 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Control High 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ferritin Control Low 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Gamma Gt 2 X 22 Ml / 2 X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Glucose (God-Pod) 10 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Glucose Hexokinase - Uv 5 X 44 Ml/5X 12.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hba1c Cali Set 5 X 0.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hba1c Con H 1X 0.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Hdl Cholesterol With Calibrator 4 X 30 Ml/4 X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ldh P 2 X 44 Ml/2X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Ldl Cholesterol With Calibrator 2 X 30 Ml/2X 10 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Lipase Xl 1 X 44 Ml/1X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Magnesium 2 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Micro Albumin Control 1 X 1 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Micro Albumin With Cal 1 X 5 Ml/2X 25 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Microprotein With Cal 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Phosphorus 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgot El Mini 2X 22 Ml/2X 6.9 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgot-Hl Small System Pack 5 X 22 Ml/5X 11.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgpt-El Mini 2 X 22 Ml/2X 6.9 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Sgpt Hl Small System Pack 5 X 22 Ml/5X 11.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein 10 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein (Two Reagents) 4 X 34 Ml/4 X 17 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Total Protein Small System Pack 5 X 6 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Triglycerides - 5X 11 Ml/5X4 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Uibc 125R 1-4 X 25 Ml, R 2-2 X 12.5 Ml,Calibrator: 2X 2 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Urea 5 X 44 Ml/5X 11 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Uric Acid 5 X 22 Ml/5X 6.8 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl Aso Turbilatex Withcalibrator (Ita) 1 X 22 Ml/1X 5.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Autowash Ac/Al Kit5 X 44 Ml/5 X 44 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Multical4 X 3 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Rf Turbilatex Withcalibrator (Ita) 1 X 22 Ml/1X 5.5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl-Crp-Turbilatex Withcalibrator (Ita) 2 X 22 Ml/2X 6.7 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Xl Hba1c With Cali Set2 X 15 Ml/2 X 5 Ml (Biochemistry Reagent For Transasia / Erba Machine Model :- Em200 ) , Blood Diluent 20 Litre (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fbh Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fdti Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Fdoi Lyse 500Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Cbiquant- 5 Detergent 4X100ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Control Level-1 , 2.5Ml (For Fully Automated Five Part Heaematology Analyser Meril Diagnostics Machine Model- Merilyzer Celquant 5 Plus , Cbc Detergent Fluid (Urit-2900) , Cbc Diluent 20 Ltr (Urit-2900) , Cbc Lytic Fluid (Urit-2900) , Cbc Proclennor (Urit-2900) , Cleaner For Cell Counter Erba H-360, 50Ml. , Elisa Washer (Erba) , Elite H Clean, 50 Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control H (3Ml) ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control L (3Ml) ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H5 Control N (3Ml)( Transasia Erba Machine Model - Elite 580 , Proprietry)) , Elite H580 Diluent, 20Litres ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H580 Lyse 1, 500Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Elite H580 Lyse 2, 500Ml ( Transasia Erba Machine Model - Elite 580 , Proprietry)) , Elite H580 Lyse 3, 1Litres ( Transasia Erba Machine Model - Elite 580 , Proprietry) , Embedded O Rings 20Pieces (Erba) , Erba Calcium Chloride For Ecl 105 , Erba D-Dimer Calibrator Kit For Ecl 105 , Erba D-Dimer Kit For Ecl 105 , Erba Norm Kit , Erba Path Kit , Erba Protime Ls For Ecl 105 , Erba Single Reaction Cuvettes For Ecl 105 , Lyse For Cell Counter Erba H-360, 500Ml , Urinorm Controls (High, Low, Normal) For Erba Laura Urine Analyzer , Procleaner For C,B,C (Erba) , Quality Control Norm (For Semi Automatic Auto Analyser Erba) , Quality Control Path (For Semi Automatic Auto Analyser Erba) , Tissue Paper Lint Free Rate Per Roll , Hub Cutter Non Electrical Stainless Steel , Hub Cutter With Sharp Container Of 1 Lt Capacity Cutting Life Of Blade Is 5000 Minimum Ats. Blade Is Made Of Stainless Steel (156911 Of 1992) Thickness Of Blade Should Be 0.5 Mm {Astha} , O2 Flow Meter With Bottle (Isi/Iso/Ce Certified) , Nebulizers : A 120V, 60Hz Mono- Phase Electrical Source With Line Connection Plug Nema 5-15 Type. Protections Against Over-Voltage And Over-Current Line Conditions. {Bpl/Omron/Beurer} , Oxygen Flow Meter With Humidifier Bottle :Chromium Plated Brass Body, Metering Tube And Cover Made Of Polycarbonate Body, Flow Adjustment By Needle Valve Equipped With Inlet Filter-100 Um, Flow Rate 0-15 Liters Per Minute, Flush Flow 60 Litres Per Minute, Flow Read By The Centre Of The Ball, Inlet Pressure 60Psi; Humidifier Bottle: Lid Made Of Abs Plastic, Jar Made Of Unbreakable Poly Carbonate, Valve Pressure Brass Chromium Plated, It Should Be Steam Autoclaved/Gas Sterilized , Regular Stethoscope (Microtone) : Stethoscope Of Standard Size,Chromium Plated Metal Binaural, V Rubber Tube In One Piece. Rotating Piper Fitting For Both Flip Functions. , Stethoscope Daimond , Stethoscope Neonatal (Microtone) , Stethoscope Pediatric (Microtone) , Vtm Vial Rack (Tarson) Rate Per Rack , Waste Bag Sealing Ties , Weighing Machine Adult Manual Krups/ Suvrna , Weighing Machine Adult Digital {Bpl/Omron , B P Appartus Digital ( Omron ) , B P Appartus Digital ( Bpl) , B P Instrument( Conventinal, Led, Mercury Free) ( (Isi/Iso/Ce Certified)) , B P Instrument( Deluxe, Dial Type With Cuff ) ( Diamond) , B P Instrument( Clock Type Dial Size 6X6 Inch , Model -Bpdl237 ) ( Diamond Only) , Clinical Thermometer ,Oval ( (Isi/Iso/Ce Certified)) , Clinical Thermometer ,Digital ( Accusure) , Rectal Thermometer ,Prismatic ( (Isi/Iso/Ce Certified)) , Emergency First Aid Resucitation Kit) ( Adult) ( (Isi/Iso/Ce Certified)) , Emergency First Aid Resucitation Kit) ( Paediatric) ( (Isi/Iso/Ce Certified)) , First Aid Medicine Storage Box/Emergency Medical Box ,Plastic,Emergency Cabinet Oragniser ,Detachable Tray Medical Box& Partition Tray For Segregation, Item Package Quantity 6,White&Red Combination With Plus Sign Medicine Organiser,Handle With Lock (23.6Cm*15.3Cm*14Cm) ( (Isi/Iso/Ce Certified)) , First Aid Medico Box ,Plastic,Multiutility Storage Box With Handle, White, Closure Type Lock (235Cm*16Cm*14Cm) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Floor Model Without Weighing Scale) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Floor Model With Digital Weighing Scale) , Height Measuring Scale(Floor Model With Mechanical Weighing Scale) ( (Isi/Iso/Ce Certified)) , Height Measuring Scale(Wall Mounted) ( (Isi/Iso/Ce Certified)) , Home Isolation Kit Bag ( (Isi/Iso/Ce Certified)) , Infant Resuscitation Kit (Autoclavable ,Resuable,Infant Resuscitator&250Ml Silicone Bellow With Non Rebreathing Valve&Mask Size 00,01&360 Degree Swiveling Patient Connector With Standard 15 Mm/22Mm Diameter&Corrugated Pvc Oxygen Reservoir& 1.5 Metres Pvc Oxygen Tubing ( (Isi/Iso/Ce Certified)) , Infantometer(Height Measuring Scale Infant) ( (Isi/Iso/Ce Certified)) , Dcp Small Plate: 3.5Mm: All Holes Ss , Dcp Narrow Plate: 4.5Mm: All Holes Ss , Dcp Broad Plate: 4.5Mm: All Holes Ss , Dcp Small Reconstruction Plate: 3.5Mm: All Holes Ss , Dcp Reconstruction Plate: 4.5Mm: All Holes Ss , Dcp Small Reconstruction Plate-Curved: 3.5Mm: All Holes Ss , Lc-Dcp Small Plate:3.5Mm: All Holes Ss , Lc-Dcp Narrow Plate:4.5Mm: All Holes Ss , 5/8 Ring-100,120,140, 160Mm, Ss , 5/8 Ring-180,200,220,240,260Mm, Ss , annual periodical maintenance (Austinmooresprosthesis) Non-Sterile, [37Mmto55mm], Ss , annual periodical maintenance (Austinmooresprosthesis) Sterile, [37Mmto55mm], Ss , Bipolar Prosthesis [Non-Fenestrated]Sterile,[37Mmto55mm], Ss , Bipolar Prosthesis[Fenestrated]Sterile,[37Mmto55mm], Ss , Blade -50,60,70,80,90,100Mm, Degree-90º,100º,110º,120º,130º:, Ss , Boxes Panner, Ss , Bushing-20Mm, Ss , C.C.Screw 4.0Mmxf.Th.-,10Mmto60mm Ss , C.C.Screw 4.0Mmxp.Th.-,10Mmto60mm Ss , C.C.Screw 6.5Mm/7.0Mmx16th.-,40Mmto120mm Ss , C.C.Screw6.5Mm/7.0Mmxf.Th.-,40Mmto120mm Ss , Cancellous Schanz Pin6.5Mmx16th./32Th.-225Mm, Ss , Cancellous Screw 3.5Mm-,10Mmto50mm Ss , Cancellous Screw 4.0Mmxf.Th.-,10Mmto60mm Ss , Cancellous Screw 4.0Mmxp.Th.-,10Mmto60mm Ss , Cannulated Dril Lbit 125Mm-2.7,3.2Mm, Ss , Cannulated Drill Bit 225Mm-4.0,4.5Mm, Ss , Carbon Fiber Ring 100-240 Ss , Circlage Wire With Loop[16,18,20Gauge]-300Mm, Ss , Connecting Clamp, Ss , Connection Bolt-20Mm, Ss , Connection Plate With Threaded End All Holes, Ss , Cortical Screw 2.7Mm-,10Mmto30mm (Selftapping) Ss , Cortical Screw 4.5Mm-,All Sizes (Selftapping) Ss , Cortical Screw3.5Mm-,All Sizes (Selftapping) Ss , Curved Plate- All Sizes, Ss , Danham Pin(Centrallythreaded)4.5/5.0-225Mm, Ss , Dc T Plate: 4.5Mm:,All Sizes Ss , Dcp Angled Blade Plate For Intertrochantric Osteotomies:, Ss , Dcp Angled Blade Plate130ºblade:50,60,70,80,90,100Mm:,All Holes Ss , Dcp Calcaneal Plate: 3.5Mm: All Sizes Ss , Dcp Condylar Buttress Plate: 4.5Mm:(L/R): All Holes Ss , Dcp Condylar Plate9 5ºblade:50/60/70/80Mm: All Sizes Ss , Dcp Narrow Plate: 4.5Mm: All Sizes, Ss , Dcp Lateral Tibia Head Buttress Plate (L/R):4.5Mm: All Sizes Ss , Dcp Semi Tubular Plate: 4.5Mm: All Sizes Ss , Dcp Small Hook Plate:3.5Mm: All Sizes Ss , Dcp Small Plate: 3.5Mm:, All Sizes Ss , Dcp Small Reconstruction Plate: 3.5Mm: All Sizes Ss , Dcp Small Reconstruction Plate-Curved: All Sizes Ss , Dcp Small Tplate Oblique Angled: 3.5Mm:,All Sizes Ss , Dcp Small Tplate R/A: 3.5Mm: All Sizes Ss , Dcp1/3Rd Tubular Plate: 3.5Mm:,All Sizes Ss , Dcpl Buttress Plate: 4.5Mm:(L/R):,All Sizes Ss , Dcpt Plate: 4.5Mm: All Sizes Ss , Dcpy Reconstruction Plate: 3.5Mm:, All Sizes Ss , Dcs Barrel Plate95º:4.5Mm: All Holes Ss , Dhs Barrel Plate 130º/135º:L/B&S/B:4.5Mm: All Sizes Ss , Dhss Crew With Compression Screw, All Sizes Ss , Distractor 6.0Mm [150Mm,200,250Mm], All Sizes Ss , Double Pin Clamp (Deluxe), Ss , Drill Bit Plain All Sizes Ss , Drill Bit Quickcoupling All Sizes Ss , Drummond Wire All Sizes Ss , Dynametric Wire Tensioner, Ss , Elastic Nail All Sizes Ss , Enders Nail All Sizes Ss , Endobutton With Loop-Sterile All Sizes Ss , Endobutton, All Sizes Ss , Enders Nail All Sizes Ss , Helical Blade (Pfna-Ii):, All Sizes Ss , Herbert Screw Cannulated All Sizes Ss , Guide Wire- All Sizes Ss , Half Ring- All Sizes Ss , Hinge-Male,Female&90º, All Sizes Ss , Ilizarow K Wire Bayonet Point, All Sizes Ss , Instruments Set For Acl/Pcl Reconstruction, All Sizes Ss , Instruments Setwith Boxfor Herbert Screw, All Sizes Ss , Interference Screw-Cannulated All Sizes Ss , Interlocking Exper Tibia Nail, All Sizes Ss , Interlocking Humerus Nail: All Sizes Ss , Interlocking Sirus Femur Nail, All Sizes Ss , Interlocking Bolt All Sizes Ss , Interlocking Expert Humerus Nail:,[Cannulated] All Sizes Ss , Interlocking Expert Tibia Nail, All Sizes Ss , Interlocking Femur Nail,[Cannulated] All Sizes Ss , Interlocking Femur Nail, All Sizes Ss , Interlocking Guide Wire, All Sizes Ss , Interlocking Long Proximal Femur Nail135º[Left]/[Right], All Sizes Ss , Interlocking Short Proximal Femur Nail (Pfn) 130º/135º, All Sizes Ss , Interlocking Supra Condylar Nail Angled, All Sizes Ss , Interlocking Tibial Nail, All Sizes Ss , Interlocking Trochantric Proximal Femurnail (Tfn)135º, All Sizes Ss , Italian annual rate contract All Sizes Ss , K. Nail (Straight)- All Sizes Ss , K. Nail(Bent)- All Sizes Ss , K. Wire Double Ended Non Sterile All Sizes Ss , Lc-Dc Broad Plate: All Sizes Ss , Lc-Dcp Narrow Plate: All Sizes Ss , Lc-Dcp Small Plate:3.5Mm:, All Sizes Ss , Locking 1/3Rd Tubular Plate:3.5Mm:, All Sizes Ss , Locking Anterolateral Distal Tibial Plate:(L/R):, All Sizes Ss , Locking Broad Plate: 4.5/5.0Mm:, All Sizes Ss , Locking Calcaneal Plate: D Type:(L/R):, All Sizes Ss , Locking Calcaneal Plate: P Type:(L/R):, All Sizes Ss , Locking Calcaneal Plate:(L/R):, All Sizes Ss , Locking Cancellous Screw 3.5Mmxf.Th.-, All Sizes Ss , Locking Cancellous Screw 5.0Mmxf.Th.-, All Sizes Ss , Locking Clavicle Hook Plate: 3.5Mm:(L/R): All Sizes Ss , Locking Curved Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Ss , Locking Curved Reconstruction Plate: 3.5Mm:, All Sizes Ss , Locking Dhs Barrel Plate All Sizes Ss , Locking Distal Femu Rplate:(L/R):, All Sizes Ss , Locking Distal Fibula Plate: 3.5Mm:, All Sizes Ss , Locking Distal Humerus Plate Dorsolatera With Support: 2.7/3.5Mm:(L/R), All Sizes Ss , Locking Distal Humerus Plate Dorsolateral:2.7/3.5Mm:(L/R):, All Sizes Ss , Locking Distal Humerus Plate Medial:2.7/3.5Mm:(L/R):, All Sizes Ss , Locking Distal Radius (Head4/5Hole)Volarplate:2.7Mm/3.5Mm:(L/R): All Sizes Ss , Locking Distal Radius Volar Plate:3.5Mm:(L/R):, All Sizes Ss , Locking Extra-Articular Distal Humerus Plate:3.5Mm:(L/R):, All Sizes Ss , Locking Lateral Distal Fibula Plate:(L/R):, All Sizes Ss , Locking Lateral Tibial Plate:(L/R):, All Sizes Ss , Locking L-Buttress Plate: 4.5/5.0Mm: All Sizes Ss , Locking Medial Distal Tibial Plate With Tab:(L/R):, All Sizes Ss , Locking Medial Distal Tibial Plate:(L/R):, All Sizes Ss , Locking Medial Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Ss , Locking Medial Proximal Tibial Plate5.0Mm:(L/R): All Sizes Ss , Locking Narrow Plate: 4.5/5.0Mm:, All Sizes Ss , Locking Olecranon Plate: 3.5Mm:(L/R): All Sizes Ss , Locking Pelvic Curved Plate: 3.5Mm: All Sizes Ss , Locking Pelvic Plate: 3.5Mm: All Sizes Ss , Locking Philos Plate: 3.5Mm: All Sizes Ss , Locking Postero Medial Proximal Tibial Plate: All Sizes Ss , Locking Posterolateral Distal Fibula Plate:(L/R): All Sizes Ss , Locking Proximal Femur Plate:4.5/5.0Mm:(L/R): All Sizes Ss , Locking Proximal Humerus Plate:3.5Mm:, All Sizes Ss , Locking Proximal Tibia Plate 3.5Mm(Ztype):(L/R): All Sizes Ss , Locking Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Ss , Locking Proximal Tibia Plate 5.0Mm:(L/R): All Sizes Ss , Locking S-Clavicle Plate With Lateral Extension: 2.7/3.5Mm:(L/R):, All Sizes Ss , Locking S-Clavicle Plate: 3.5Mm:(L/R):, All Sizes Ss , Locking Screw 2.7Mm(S.T.)-, All Sizes Ss , Locking Screw 3.5Mm(S.T.)-, All Sizes Ss , Locking Screw 5.0Mm(S.T.)-, All Sizes Ss , Locking Small Plate: 3.5Mm:, All Sizes Ss , Locking Small Tplate Obliqueangeled:3.5Mm:(L/R): All Sizes Ss , Locking Small Tplate Rightangeled:3.5Mm:, All Sizes Ss , Locking Straight Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Ss , Locking Straight Reconstruction Plate:3.5Mm:, All Sizes Ss , Locking T-Buttress Plate: 4.5/5.0Mm: All Sizes Ss , Locking Tomo Fix Medial High Medial Plate (Osteotomy):3.5Mm:, All Sizes Ss , Malleolar Screw3.5Mm-, All Sizes Ss , Malleolar Screw4.5Mm-, All Sizes Ss , Mechanical Wire Tensioner, All Sizes Ss , Modular Bipolar Cup [Collar+3,0,-3], [Ball - All Sizes Ss , Modular Bipolar Stem [Small,Medium,Large], All Sizes Ss , Multipin Clamp, All Sizes Ss , Nut, All Sizes Ss , Nylonnut, All Sizes Ss , Olive Wire 400Mm, All Sizes Ss , Open Single Pin Clamp, All Sizes Ss , Paediatric Dhs Barrel Plate: 3.5Mm:, All Sizes Ss , Paediatric Dhss Crew With Compression Screw, All Sizes Ss , Pfn Bolt6.5Mm-, All Sizes Ss , Pfnbolt8.0Mm-, All Sizes Ss , Post Male/Female- All Sizes Ss , Proxima Femur Nail Antirotation (Pfna -Ii):Short:, All Sizes Ss , Proximal Femur Nail Antirotation (Pfna-Ii):Long:(L/R):, All Sizes Ss , Rush Nai All Sizes Ss , S.S. Wire-16,18,20,22,24Gauge, All Sizes Ss , Scahnz Pin All Sizes Ss , Schanz Pin Bolt, All Sizes Ss , Schanz Pin Introducer, All Sizes Ss , Single Pin Clamp (Deluxe), All Sizes Ss , Single Pin Clamp (Ordinary), All Sizes Ss , Sirus Nail Bolt All Sizes Ss , Small Spanner, All Sizes Ss , Spacing Washer, All Sizes Ss , Spiked Ligament Staple [Small&Large], All Sizes Ss , Spiked Ligament Washer, All Sizes Ss , Square Nail [Radius/Ulna] All Sizes Ss , Steinman Pin All Sizes Ss , Straight Plate All Sizes Ss , Suture Dis Cwasher, All Sizes Ss , Suture Discwith -Regular, All Sizes Ss , Suture Discwith -Conical, All Sizes Ss , Telescopic Rod All Sizes Ss , Thompsons Prosthesis Non-Sterile, All Sizes Ss , Thompsons Prosthesis Sterile, All Sizes Ss , Threaded Guide Wire- All Sizes Ss , Threaded K. Wire Double Ended - All Sizes Ss , Threaded Rod- All Sizes Ss , Threaded Rod-Slotted- All Sizes Ss , Threaded Socket- All Sizes Ss , Tibial Post Fixation Screw All Sizes Ss , Transverse Clamp, All Sizes Ss , Triple Trocarset, All Sizes Ss , Tubeto Tube Clamp, All Sizes Ss , Tubular Rod(Perinchrate), All Sizes Ss , Twin Adjustable Clamp-Curved, All Sizes Ss , Twin Adjustable Clamp-Straight, All Sizes Ss , Twisted Plate- All Sizes Ss , Washer (Slotted), All Sizes Ss , Wire Fixation Bolt-Slotted & Cannulated, All Sizes Ss , Wrenchoqube All Sizes Ss , K Wire Sterile Double All Sizes Ss , Dcp Small Plate: 3.5Mm: All Holes Titanium , Dcp Narrow Plate: 4.5Mm: All Holes Titanium , Dcp Broad Plate: 4.5Mm: All Holes Titanium , Dcp Small Reconstruction Plate: 3.5Mm: All Holes Titanium , Dcp Reconstruction Plate: 4.5Mm: All Holes Titanium , Dcp Small Reconstruction Plate-Curved: 3.5Mm: All Holes Titanium , Lc-Dcp Small Plate:3.5Mm: All Holes Titanium , Lc-Dcp Narrow Plate:4.5Mm: All Holes Titanium , 5/8 Ring-100,120,140, 160Mm, Titanium , 5/8 Ring-180,200,220,240,260Mm, Titanium , annual periodical maintenance (Austinmooresprosthesis) Non-Sterile, [37Mmto55mm], Titanium , annual periodical maintenance (Austinmooresprosthesis) Sterile, [37Mmto55mm], Titanium , Bipolar Prosthesis [Non-Fenestrated]Sterile,[37Mmto55mm], Titanium , Bipolar Prosthesis[Fenestrated]Sterile,[37Mmto55mm], Titanium , Blade -50,60,70,80,90,100Mm, Degree-90º,100º,110º,120º,130º:, Titanium , Boxes Panner, Titanium , Bushing-20Mm, Titanium , C.C.Screw 4.0Mmxf.Th.-,10Mmto60mm Titanium , C.C.Screw 4.0Mmxp.Th.-,10Mmto60mm Titanium , C.C.Screw 6.5Mm/7.0Mmx16th.-,40Mmto120mm Titanium , C.C.Screw6.5Mm/7.0Mmxf.Th.-,40Mmto120mm Titanium , Cancellous Schanz Pin6.5Mmx16th./32Th.-225Mm, Titanium , Cancellous Screw 3.5Mm-,10Mmto50mm Titanium , Cancellous Screw 4.0Mmxf.Th.-,10Mmto60mm Titanium , Cancellous Screw 4.0Mmxp.Th.-,10Mmto60mm Titanium , Cannulated Dril Lbit 125Mm-2.7,3.2Mm, Titanium , Cannulated Drill Bit 225Mm-4.0,4.5Mm, Titanium , Carbon Fiber Ring 100-240 Titanium , Circlage Wire With Loop[16,18,20Gauge]-300Mm, Titanium , Connecting Clamp, Titanium , Connection Bolt-20Mm, Titanium , Connection Plate With Threaded End All Holes, Titanium , Cortical Screw 2.7Mm-,10Mmto30mm (Selftapping) Titanium , Cortical Screw 4.5Mm-,All Sizes (Selftapping) Titanium , Cortical Screw3.5Mm-,All Sizes (Selftapping) Titanium , Curved Plate- All Sizes, Titanium , Danham Pin(Centrallythreaded)4.5/5.0-225Mm, Titanium , Dc T Plate: 4.5Mm:,All Sizes Titanium , Dcp Angled Blade Plate For Intertrochantric Osteotomies:, Titanium , Dcp Angled Blade Plate130ºblade:50,60,70,80,90,100Mm:,All Holes Titanium , Dcp Calcaneal Plate: 3.5Mm: All Sizes Titanium , Dcp Condylar Buttress Plate: 4.5Mm:(L/R): All Holes Titanium , Dcp Condylar Plate9 5ºblade:50/60/70/80Mm: All Sizes Titanium , Dcp Narrow Plate: 4.5Mm: All Sizes, Titanium , Dcp Lateral Tibia Head Buttress Plate (L/R):4.5Mm: All Sizes Titanium , Dcp Semi Tubular Plate: 4.5Mm: All Sizes Titanium , Dcp Small Hook Plate:3.5Mm: All Sizes Titanium , Dcp Small Plate: 3.5Mm:, All Sizes Titanium , Dcp Small Reconstruction Plate: 3.5Mm: All Sizes Titanium , Dcp Small Reconstruction Plate-Curved: All Sizes Titanium , Dcp Small Tplate Oblique Angled: 3.5Mm:,All Sizes Titanium , Dcp Small Tplate R/A: 3.5Mm: All Sizes Titanium , Dcp1/3Rd Tubular Plate: 3.5Mm:,All Sizes Titanium , Dcpl Buttress Plate: 4.5Mm:(L/R):,All Sizes Titanium , Dcpt Plate: 4.5Mm: All Sizes Titanium , Dcpy Reconstruction Plate: 3.5Mm:, All Sizes Titanium , Dcs Barrel Plate95º:4.5Mm: All Holes Titanium , Dhs Barrel Plate 130º/135º:L/B&S/B:4.5Mm: All Sizes Titanium , Dhss Crew With Compression Screw, All Sizes Titanium , Distractor 6.0Mm [150Mm,200,250Mm], All Sizes Titanium , Double Pin Clamp (Deluxe), Titanium , Drill Bit Plain All Sizes Titanium , Drill Bit Quickcoupling All Sizes Titanium , Drummond Wire All Sizes Titanium , Dynametric Wire Tensioner, Titanium , Elastic Nail All Sizes Titanium , Enders Nail All Sizes Titanium , Endobutton With Loop-Sterile All Sizes Titanium , Endobutton, All Sizes Titanium , Enders Nail All Sizes Titanium , Helical Blade (Pfna-Ii):, All Sizes Titanium , Herbert Screw Cannulated All Sizes Titanium , Guide Wire- All Sizes Titanium , Half Ring- All Sizes Titanium , Hinge-Male,Female&90º, All Sizes Titanium , Ilizarow K Wire Bayonet Point, All Sizes Titanium , Instruments Set For Acl/Pcl Reconstruction, All Sizes Titanium , Instruments Setwith Boxfor Herbert Screw, All Sizes Titanium , Interference Screw-Cannulated All Sizes Titanium , Interlocking Exper Tibia Nail, All Sizes Titanium , Interlocking Humerus Nail: All Sizes Titanium , Interlocking Sirus Femur Nail, All Sizes Titanium , Interlocking Bolt All Sizes Titanium , Interlocking Expert Humerus Nail:,[Cannulated] All Sizes Titanium , Interlocking Expert Tibia Nail, All Sizes Titanium , Interlocking Femur Nail,[Cannulated] All Sizes Titanium , Interlocking Femur Nail, All Sizes Titanium , Interlocking Guide Wire, All Sizes Titanium , Interlocking Long Proximal Femur Nail135º[Left]/[Right], All Sizes Titanium , Interlocking Short Proximal Femur Nail (Pfn) 130º/135º, All Sizes Titanium , Interlocking Supra Condylar Nail Angled, All Sizes Titanium , Interlocking Tibial Nail, All Sizes Titanium , Interlocking Trochantric Proximal Femurnail (Tfn)135º, All Sizes Titanium , Italian annual rate contract All Sizes Titanium , K. Nail (Straight)- All Sizes Titanium , K. Nail(Bent)- All Sizes Titanium , K. Wire Double Ended Non Sterile All Sizes Titanium , Lc-Dc Broad Plate: All Sizes Titanium , Lc-Dcp Narrow Plate: All Sizes Titanium , Lc-Dcp Small Plate:3.5Mm:, All Sizes Titanium , Locking 1/3Rd Tubular Plate:3.5Mm:, All Sizes Titanium , Locking Anterolateral Distal Tibial Plate:(L/R):, All Sizes Titanium , Locking Broad Plate: 4.5/5.0Mm:, All Sizes Titanium , Locking Calcaneal Plate: D Type:(L/R):, All Sizes Titanium , Locking Calcaneal Plate: P Type:(L/R):, All Sizes Titanium , Locking Calcaneal Plate:(L/R):, All Sizes Titanium , Locking Cancellous Screw 3.5Mmxf.Th.-, All Sizes Titanium , Locking Cancellous Screw 5.0Mmxf.Th.-, All Sizes Titanium , Locking Clavicle Hook Plate: 3.5Mm:(L/R): All Sizes Titanium , Locking Curved Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Titanium , Locking Curved Reconstruction Plate: 3.5Mm:, All Sizes Titanium , Locking Dhs Barrel Plate All Sizes Titanium , Locking Distal Femu Rplate:(L/R):, All Sizes Titanium , Locking Distal Fibula Plate: 3.5Mm:, All Sizes Titanium , Locking Distal Humerus Plate Dorsolatera With Support: 2.7/3.5Mm:(L/R), All Sizes Titanium , Locking Distal Humerus Plate Dorsolateral:2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking Distal Humerus Plate Medial:2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking Distal Radius (Head4/5Hole)Volarplate:2.7Mm/3.5Mm:(L/R): All Sizes Titanium , Locking Distal Radius Volar Plate:3.5Mm:(L/R):, All Sizes Titanium , Locking Extra-Articular Distal Humerus Plate:3.5Mm:(L/R):, All Sizes Titanium , Locking Lateral Distal Fibula Plate:(L/R):, All Sizes Titanium , Locking Lateral Tibial Plate:(L/R):, All Sizes Titanium , Locking L-Buttress Plate: 4.5/5.0Mm: All Sizes Titanium , Locking Medial Distal Tibial Plate With Tab:(L/R):, All Sizes Titanium , Locking Medial Distal Tibial Plate:(L/R):, All Sizes Titanium , Locking Medial Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Titanium , Locking Medial Proximal Tibial Plate5.0Mm:(L/R): All Sizes Titanium , Locking Narrow Plate: 4.5/5.0Mm:, All Sizes Titanium , Locking Olecranon Plate: 3.5Mm:(L/R): All Sizes Titanium , Locking Pelvic Curved Plate: 3.5Mm: All Sizes Titanium , Locking Pelvic Plate: 3.5Mm: All Sizes Titanium , Locking Philos Plate: 3.5Mm: All Sizes Titanium , Locking Postero Medial Proximal Tibial Plate: All Sizes Titanium , Locking Posterolateral Distal Fibula Plate:(L/R): All Sizes Titanium , Locking Proximal Femur Plate:4.5/5.0Mm:(L/R): All Sizes Titanium , Locking Proximal Humerus Plate:3.5Mm:, All Sizes Titanium , Locking Proximal Tibia Plate 3.5Mm(Ztype):(L/R): All Sizes Titanium , Locking Proximal Tibia Plate 3.5Mm:(L/R): All Sizes Titanium , Locking Proximal Tibia Plate 5.0Mm:(L/R): All Sizes Titanium , Locking S-Clavicle Plate With Lateral Extension: 2.7/3.5Mm:(L/R):, All Sizes Titanium , Locking S-Clavicle Plate: 3.5Mm:(L/R):, All Sizes Titanium , Locking Screw 2.7Mm(S.T.)-, All Sizes Titanium , Locking Screw 3.5Mm(S.T.)-, All Sizes Titanium , Locking Screw 5.0Mm(S.T.)-, All Sizes Titanium , Locking Small Plate: 3.5Mm:, All Sizes Titanium , Locking Small Tplate Obliqueangeled:3.5Mm:(L/R): All Sizes Titanium , Locking Small Tplate Rightangeled:3.5Mm:, All Sizes Titanium , Locking Straight Reconstruction Plate (Roundhole):3.5Mm:, All Sizes Titanium , Locking Straight Reconstruction Plate:3.5Mm:, All Sizes Titanium , Locking T-Buttress Plate: 4.5/5.0Mm: All Sizes Titanium , Locking Tomo Fix Medial High Medial Plate (Osteotomy):3.5Mm:, All Sizes Titanium , Malleolar Screw3.5Mm-, All Sizes Titanium , Malleolar Screw4.5Mm-, All Sizes Titanium , Mechanical Wire Tensioner, All Sizes Titanium , Modular Bipolar Cup [Collar+3,0,-3], [Ball - All Sizes Titanium , Modular Bipolar Stem [Small,Medium,Large], All Sizes Titanium , Multipin Clamp, All Sizes Titanium , Nut, All Sizes Titanium , Nylonnut, All Sizes Titanium , Olive Wire 400Mm, All Sizes Titanium , Open Single Pin Clamp, All Sizes Titanium , Paediatric Dhs Barrel Plate: 3.5Mm:, All Sizes Titanium , Paediatric Dhss Crew With Compression Screw, All Sizes Titanium , Pfn Bolt6.5Mm-, All Sizes Titanium , Pfnbolt8.0Mm-, All Sizes Titanium , Post Male/Female- All Sizes Titanium , Proxima Femur Nail Antirotation (Pfna -Ii):Short:, All Sizes Titanium , Proximal Femur Nail Antirotation (Pfna-Ii):Long:(L/R):, All Sizes Titanium , Rush Nai All Sizes Titanium , S.S. Wire-16,18,20,22,24Gauge, All Sizes Titanium , Scahnz Pin All Sizes Titanium , Schanz Pin Bolt, All Sizes Titanium , Schanz Pin Introducer, All Sizes Titanium , Single Pin Clamp (Deluxe), All Sizes Titanium , Single Pin Clamp (Ordinary), All Sizes Titanium , Sirus Nail Bolt All Sizes Titanium , Small Spanner, All Sizes Titanium , Spacing Washer, All Sizes Titanium , Spiked Ligament Staple [Small&Large], All Sizes Titanium , Spiked Ligament Washer, All Sizes Titanium , Square Nail [Radius/Ulna] All Sizes Titanium , Steinman Pin All Sizes Titanium , Straight Plate All Sizes Titanium , Suture Dis Cwasher, All Sizes Titanium , Suture Discwith -Regular, All Sizes Titanium , Suture Discwith -Conical, All Sizes Titanium , Telescopic Rod All Sizes Titanium , Thompsons Prosthesis Non-Sterile, All Sizes Titanium , Thompsons Prosthesis Sterile, All Sizes Titanium , Threaded Guide Wire- All Sizes Titanium , Threaded K. Wire Double Ended - All Sizes Titanium , Threaded Rod- All Sizes Titanium , Threaded Rod-Slotted- All Sizes Titanium , Threaded Socket- All Sizes Titanium , Tibial Post Fixation Screw All Sizes Titanium , Transverse Clamp, All Sizes Titanium , Triple Trocarset, All Sizes Titanium , Tubeto Tube Clamp, All Sizes Titanium , Tubular Rod(Perinchrate), All Sizes Titanium , Twin Adjustable Clamp-Curved, All Sizes Titanium , Twin Adjustable Clamp-Straight, All Sizes Titanium , Twisted Plate- All Sizes Titanium , Washer (Slotted), All Sizes Titanium , Wire Fixation Bolt-Slotted & Cannulated, All Sizes Titanium , Wrenchoqube All Sizes Titanium , K Wire Sterile Double All Sizes Titanium , 10X14 Medium Tray , Autoclave Drum , Bipolar Cautery , Boiler , Draping Sheet , Duragibre , Ethlon 1-0Rc , Green Draping Sheet , Half Anoscope , Indloop , Isocyanne Acryl Glue , Isoflurane Injection , Laparoscopic Babcock , Laparoscopic Grasper , Laparoscopic Sheath , Lt Clump 300 , Lt Clump 400 , Macroporous Hermial Mush , Monocryl 4-0 Rc , Neostigmine + Glycopyalate (Reversal) Injection , Open Chele Clip Applicator Huom , Ot Gown , Plastic Laparoscopic Port 10 Mm , Plastic Laparoscopic Port 5 Mm , Proctoscope , Prolene 1-0 Rb , Prolene 2-0 Rb , Prolene 3-0 Rb , Pulse Oximeter , Reservoir Bag Below Jar , Skin Marker , Tissue Adhesive Glue , Tracheastong Tray (T.T) , Tridos Vicryl 2-Rb , Vacuronium Injection , 45 Degree Kelmen 0.9Mm Phaco Sleeve (Alcon) , 45 Degree Kelmen 0.9Mm Phaco Tip (Alcon) , Angled Vannas Scissors , Anterior Chamber Iol (Power Range + 1.0 Ds To + 25.0 Ds ) , Artery Forceps (Medium) , B Class Autoclave , Barraquer Needle Holder , Barraquer Wire Speculum , Bimanual I & A Handpiece ( For Phaco 1 Set) , Blades For Eye Surgey Crecent 2.6 , Blades For Eye Surgey Implant 5.2Mm (Keratone) , Blades For Eye Surgey Keratones 2.8Mm Keratone , Blades For Eye Surgey Keratones 3.2Mm Keratone , Bome Plier , Bowmanns Probes , Capsulaorhexis Lit Rate Foeceps With Kirby Round Handle 103Mm Length , Capsulorhexis Forceps 23G With Micro Grasping Tip , Cassette For Laureate Phaco ( Alcon) , Castrovejo Vernier Calliper ( Stainless Steel) , Castroviejo Corneal Scissor , Chalazion Clamp , Chalazion Curette , Conjunctival Scissor , Corneal Universal Curved Scissor , Dastoor Superior Rectus Forceps , Direct Opthalmoscope Bulb With Charger Handle (Heine) , Epilation Forceps , Eye Aspiration Canula 20 No & 22 No. , Eye Bowling , Eye Cannula , Eye Speculum With Adustable Spread (Screw Type) , Eye Vectus , Formalin Chamber , Halogen Bubl 15V.24V (150W) 24V (250W) With Reflection , Hydrophillic Acrylie Foldabale Iols In Preloaded Delivery System Optical Diameter 6Mm , Overall Length 12.5Mm To 13 Mm Optic Design Biconvex 360Degrees Squre Edge And Aspheric Optics Dioptric Range + 1.0 Ds To 30 Ds , Hydroxypropyl Methyleellulose Inj. 2%, 2Ml Pfs (Glass Syring) , Hydroxypropyl Methyleellulose Inj. 2%, 5Ml Pfs (Glass Syring) , Hydrrodissection Cannula , I&A Cannula 18G, 20G, 22G , Instrument Tray , Instrument Tray ( Set Of 15 Instrument) , Iol Dialer , Iris Repositor , Irrigation & Aspiration Cannula 21G (Simco) , Irrigation & Aspiration Cannula 22G (Simco) , Irrigation & Aspiration Cannula 23G (Simco) , Irrigation Wire Vectis 22G , Kidney Tray Large , Kidney Tray Small , Kratz Barraquer Wire Speculum Adult (Size) , Large Bowls , Laureate (Alcon) Phaco Canulla , Laureate (Alcone) Phaco Tips Cleves , Lens Holding Forceps T Type (110Mm) , Lensometer , Lims 1*2 Teeth Extrafine Forceps , Lims Forceps , Mc Pherson Forceps , Mcpherson Angled 12Mm Castroviejo Forceps (109Mm Size) , Medelec Corneal Forceps Staight Micro 1*2 Length , Medium Needle Holder , Mephesson Forceps Angled , Micro Capsulorhexis Forceps , Micro Vanna Scissor , Mosquito Artery , Mosquito Artery Curved , Mosquito Forceps , Mvr Blad 20No. Angled Blade , Needle Holder Barraquer Curved W/O Locl &Lock , Opthalamoscope Bulb , Phaco Chopper , Phaco Spatula Cum Rotator Doublr Ended , Pierse Corneal Forceps (Hoskin) , Pinky Ball (Eye) , Plain Scissor (Small) , Presbiopics Spectacles + 0.50 Ds To + 3.0 Ds , Proparacian Eye Drop , Punctum Dilator , Retinoscope With Charger Handle &Charger , Self Retaining Eye Speculum (Liberman) , Simco Irrigation And Aspiration , Simcoes 18A Cannula 23G,22G , Sinsky Hook , Slik/Nylon 10-0 , Small Bowls , Sponge Holding Forceps , Superior Rectus Forceps 1*2 Teeth , Suture Tying Forceps Curved , Suture Tying Forceps Straight , Tenotomy Scissor , Tonometer , Torch , Trabeudectomy Punch , Travoprost 40 Ug/Ml 2.5Ml Vial Eye Drops 40 Ug/Ml 2.5Ml , Trial Lense Set , Utrata Capsulorhexis Forceps , VannaS Scissor ( Angled) , Vernier Calliper Stainless Steel , Vertical Phaco Chopper , Vicryl Suture 6-0 , Vicryl Suture 8-0 , Vision Box For Eye , Wescott Tenotomy Scissor , Wire Speculum , Wire Vectis (Irrigating) , Wrench For Alcon Phaco Tip (Metal) , Antrum Curette , Antrum Grasping Forceps , Antrum Nasal Scissor Straight , Tonsil Snare , Waugh Dissecting Forceps Plain , Adenoid Curette With Cage Small & Large , Adenoid Curette Without Cage Small & Large , Adson Forceps Plain , Adson Forceps Tooth , All Ent Opd Instrument , Antrume Ball Double Ended , Antrume Punch Backward Cutting Up , Antrume Punch Through Cutting , Antrume Sickle Knife , Antrume Suction Cannula , Ash Septum Forceps , Aur Frichet Nasal Retractor , Backhouse Towel Forceps , Ballenger Swivel Knife , Beals Respatary , Birkett Tonsil Artery Forceps Straight & Curved , Blakeley Nasal Forceps 90 Degree Upward , Blakesley Nasal Forceps 45 Degree Upward , Blakesley Nasal Forceps Straight , Bone Cutting Forceps. , Boyle Davis Mouth Gag Set Of 5 Blades Adult & Child. , Chiset , Circular Knife , Cottle Alar Retractor , Curved Suction 1,2,3,4 1Set , Denis Brown Tonsil Holding Forceps , Draffine Bipod Stand With Plates. , Drill Burr - Cutting- 5,4,3,2 Diamond- 5,4,3,2 , Drill Machionl (Marathan) , Ear Speculum Set Of 4 Black Finish , Endoscope 0 , 45, 70 Degree With Complete Unit. , Ent Examination Unit , Ent Otoscope , Farabeuf Elevator , Freer Elevator Double Ended , Frogior Suction Cannula , Gauge , Hand Piece Nsk Straight , Hartman Aurat Forceps , Hause Diper Nipper , Headlight 10W , Heyman Turbinectomy Scissors , House Curret Double Ended , Iris Scissors 6 , Irrigation And Aspiration Cannula , Joseph Nasal Rasp Fine & Coarse , Joseph Nasal Scissor , Karrisian Punch , Killian Nasal Speculum Small, Medium, Large , Kilner Retractor , Lucs Nasal Forceps Small, Large , Mallet , Massing Elevator Double Ended , Mastoid Retractor 2X2 Pronges , Mastoid Retractor 3X3 Pronges , Mastoid Suction Tube Set Of 4 , Mastoid Suction Tube Set Of 4 , Micro Crocodile Cup Forceps Set , Micro Crocodile Forceps Serrated Set -2 , Micro Ear Suction Tips Set Adapter , Microscopezeiss F Recording , Needle 45 Hook , Needle 90 Hook , Needle Curved , Needle Straight , Negus Pusher Forceps , Negus Tonsil Artery Forceps Long Curved & V- Shaped , Oesteotome , Peritonsillar Sillar Forceps , Plaster Knife , Pta (Pure Tone Audiometers) With Oae , Sickle Knife , Sterilizing Box + Double Silicon Matt , Sterilizing Box With Double Silicon Matt , Suction Elevator With Stillet , Suction Elevator With Stillet. , Suction Machine Portable And For Ot ( 1 Horse Power) , Super Punch Through Letting Up Turned , Superior Punch Through Cutting St. , Thudicum Nasal Speculum Set Of 3 , Tilley Nasal Packing Forcep , Tonsil Dissector , Tonsil Needle Holder , Tonsil Piller Retractor And Dissector , Tonsil Scissor Straight & Curved , Tonsillar Knife , Walsham Septum Forceps , Walter Scissors , Waugh Dissecting Forceps 1X2 Teeth , Yunkour Suction Tube , Black Hit , Candle Round( Big Size) , Detergent Liquid 1 Litre ( (Isi/Iso/Ce Certified)) , Detergent Powder 1Kg ( (Isi/Iso/Ce Certified)) , Disposable Trimmer Plus Skin Prep Razor ( (Isi/Iso/Ce Certified)) , Floor Duster 1X1mt Superior Quality , Hand Duster 22 X 22Cm Superior Quality , Harpic Bathroom Cleaner 500 Ml (Red) ( (Isi/Iso/Ce Certified)) , Harpic Toilet Cleaner 500 Ml (Blue) ( (Isi/Iso/Ce Certified)) , Heat Cure Acrylic Powder (Isi/Iso/Ce Certified) Pink , Hydrogen Peroxide 3%, 100 Ml ( (Isi/Iso/Ce Certified)) , Hydrogen Peroxide Solution 6%, 400 Ml , Lead & Colour Pencil For Tissue Labeling ( (Isi/Iso/Ce Certified)) , Liquid Hand Wash Soap 5 Litre ( (Isi/Iso/Ce Certified)) , Liquid Hand Wash Soap 5 Litre (Safe For Skin)Isi/Iso/Gmp Certified , Loader (Iron Trolley Stainless Steel With Wide& Large Wheels) Weight Bearing Capacity 300 Kg. (For Goods Transporation Inside Hospital) , Mattress Hospital With Rexin Cover 72*36*4 Inch 40 Density 3 Year Warranty ( (Isi/Iso/Ce Certified)) , Micro Crocodile Forcep Curved ( (Isi/Iso/Ce Certified)) , Mopping Trolley With 2 Bucket On Four Wheels ( (Isi/Iso/Ce Certified)) , Mosquito Repellent Liquid Complete Set (Machine With Reffil) Unit Rate ( (Isi/Iso/Ce Certified)) , Mosquito Repellent Liquid ( Reffil Only) Unit Rate , Naphthalene Balls (Repellent Against Insects & Moths) Pack Of 200 Gm. ( (Isi/Iso/Ce Certified)) , Naphthalene Balls (Repellent Against Insects & Moths) Pack Of 200 Gm. ( (Isi/Iso/Ce Certified)) , Needle Destroyer 1.5 Litre Stainless Steel ( (Isi/Iso/Ce Certified)) , Phool Jharu (Baans) Standard Quality Per Kg. , Phool Jharu Standard Quality Per Kg. , Thermocol Box Size 18.5X12.5X13 Cm. , Toilet Cleaner Brush Superior Quality , Tongue Depressor Ss ( (Isi/Iso/Ce Certified)) , Tongue Depressor Ss ,L-Shape ( (Isi/Iso/Ce Certified)) , Wiper For Cleaning Floor(Long Stainless Steel Handle) Good Quality , Wiper For Cleaning Floor(Long Stainless Steel Handle) Good Quality (Scotch Brite) , Squeeze Bottle 100Ml , Falcon Tube 50Ml , Falcon Tube Stand , Ortho-Tolidine Solution/Reagent 500Ml , Ortho-Tolidine Test Kit (5 Ppm Level) , Dengue Elisa Igm Kit , Elisa Reader Paper Roll , Bmw Poly Bags (Red, Black, Yellow, Blue) Per Kag , Bio Waste Dustbin 15-20 Litter
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 12
Contract Date: Ref. Documents Contract Value : 53.82 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
West Bengal View Result →
11.
Defence #11392800 Technical Bid
Tender for Demolition Of Brick Work /Stone Masonry/Pcc Block Masonry Built In Cement Mortar Of Any Description Complete All As Specified And As Directed , Taking Down Cement Plaster Of Any Description Hacking For Key Or Raking Out Joint On Old Brick Work/ Stone /Concrete Surface Etc Complete All As Specified And As Directed , Demolition Of Stone Slab And Tiles Incl Backing Coat Of Any Description Or Thickness In Floors, Aprons Etc (Laid Dry Or Laid Dry And Pointed) Etc Complete All As Specified And As Directed , Demolition Of Cement Concrete And Paving Not Exc 15 Cm Thick (Below Or Above Ground Level) Complete All As Specified And As Directed. , Demolition Of Reinforced Cement Concrete (Reinforcement Cut As Required To Facilitate Demolition) Of Any Description & In Any Position Not Specifically Provided For Complete All As Specified And As Directed , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For Etc Complete All As Specified And As Directed , Dismantling Plain Or Corrugated Steel Sheeting Any Gauge Thickness Including Nanital Or Similar Pattern Roof Covering Complete All As Specified And As Directed , Demolition And Breaking Up Drain Pipes Up To 100 Mm Dia Bofe (Salt Glazed Ware, Ac Or Reinforced Concrete) Set In Cement Mortar Etc Complete All As Specified And As Directed , Material And Labour For Sand Filling Under Floors Or In Foundations Including Watering And Consolidation Under Bedding For Interlocking Tiles Etc Complete All As Specified And As Directed , Material And Labour For Plain Cement Concrete Type D-2 1:4:8 (With Using 40 Mm Graded Stone Aggregates) As In Foundations And Mass Concrete Etc Complete All As Specified And As Directed , Material And Labour For Cement Concrete Type 1:2:4 B-0, (Using 12.50 Mm Graded Stone Aggregate) As In Surface Channels And Drains Etc Complete All As Specified And Directed. , Material And Labour For Providing Cement Concrete Type 1:2:4 B 0 (12.50Mm Graded Stone Aggregate) In Copings, Leveling Concrete, Kerbs, Water Troughs And The Like Including Weathering, Slightly Rounded Or Chamfered Angles And Throating As Directed , Material And Labour For Precast Cement Concrete Type B1, 1:2:4 (Using 20 Mm Graded Stone Aggregate) As In Landings, Cover Slab (For Manholes Etc) And Similar Work Including Necessary Form Work And Set In Cm 1:6 Etc Complete All As Specified And Directed. , Material And Labour For Reinforced Cement Concrete (Nominal Mix) Type B-1 (1:2:4) With Using 20 Mm Graded Stone Aggregates As Columns, Pillars, Piers, Posts, Ftg, Etc Struts Etc Complete All As Specified And As Directed , Material And Labour For Providing 25Mm Thick Precast Cement Concrete Louvres Type B-0 , 1:2:4 (With Using 12.5 Mm Graded Stone Aggregaes) Set In Cm 1:6 As And Jallies, 25Mm Thick (Measured Solid), Including All Mouldings But Excluding Frame (Pre -Cast Frame Shall Be Measured Separately And Paid For Under Item) Etc Complete All As Specified And As Directed , Supply Only Water Proofing Compound. , Material And Labour For Brickwork (Old Size Brick) With Sub Class ‘B Bricks, Straight Or Curved On Plan Exc 6M Mean Radius Built In Cement Mortar 1:4 Etc Complete All As Specified And As Directed , Material And Labour For Brick Work With Sub Class B Bricks, Straight Or Curved On Plan Exc To Any Radius In Half Brick Thick Walls Built In Built In Cm 1:4 Complete All As Specifed And Directed , Material And Labour For 18 To 20Mm Thick Granite Granite Stone Slab (Of Any Type) Work (Table Rubbed And Polished) Granite (Of Any Type) Work For Wall Lining (Veneering To Wall) 12Mm Thick In Cement Mortar (1:3) And Pointing With White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite Slab Including Grinding The Edges Half Round Etc Complete All As Specified And As Directed , Material And Labour For Formwork With Square / Rectangular Pillars, Posts, Struts, Piers, Columns And, Ftg Etc, Stanchions With Rough Finished Surface Of Concrete Etc Complete All As Specified And As Directed , Material And Labour Tmt Bar 10Mm Dia And Over Cut To Length Bent To Shape Required Including Cranking, Bending Spirally For Hoping For Columns Hooking Ends And Binding With & Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And As Directed , All As Per Item No 21 Above But 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders Etc Complete All As Specified And As Directed , Material And Labour For Structural Steel Work With Rolled Mild Steel Sections As In Main And Cross Beams, Hip And Jack Rafters, Trusses, Purlins Where Connected To Common Rafters And Running Rails And Guides For Sliding Doors; Fixed With Angle Cleats Or Other Connecting Plates Conforming To Fe-290 (Gde E-165) Quality A Complete All As Specified And Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Complete All As Specified And As Directed. , Supply And Fix Pre-Painted Hot Dip Aluminium Zinc Alloy Metalic Coated Trapezoidal Profile Steel Sheet 0.50Mm Thick (Total Coated Thickness), Any Patteren Corresponding To Is 15965: 2012 Of Durability Class 3, Four (4) Coat Atmospheric Classification Category 3, Coating Class Az 150 Of An Approved Colour Havingb Yield Strength Of 550Mpa As In Roof Covering/Wall Cladding, Fixed With Self Tapping Screws As Specified And As Directed Note: To Be Executed For Provison Of Ridges And Hips, Valley Etc Complete All As Specifed And As Directed , Material And Labour For Machine Presssd Pre-Cast Concrete Interlocking Coloured Paving Block Of Glass Fibre Reinfoced Glossy Finished Vibro Compacted Any Shape And Size Confirming To Is-15658-2006 Of 60 Mm Thick, M-35 Grade To Match With Grey Cement And Pigment Etc Complete All As Specified And As Directed , Supply And Fix Exterior Grade, Coloured Glossy Finish Rubber Pressed, Cement Concrete Designer Chequered Tiles Of Size 30Cm X 30Cm X 25Mm Thick Set, Jointed And Pointed In Neat Cement Slurry With Grey Cement And Pigment To Match The Shade / Colour / Matrix Of Tiles Over Etc Complete All As Specified And Directed. , Material And Labour For Heavy Duty Parking Tiles Size 300Mm X 300 Mm X 10 Mm Thick White Cement And Pigments Of Approved Maked Jointed With Cement Slurry And Pointed With White Cement Mixed With Pigment To Match With The Tiles Complete All As Specified And Directed. , Material And Labour For Machine Cut Kota Stone Slab Flooring 20-25Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Mirror Polishing Incl Cutting Edges Etc Etc Complete All As Specified And As Directed Complete All As Specified And As Directed , Material And Labour For Machine Cut Kota Stone Slab 18-20 Mm Thick In Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointed With Including 10Mm Thick Rendering In Cm 1:4 Etc Set And Jointed In Neat Cement Slurry Complete All As Specified And Directed. , Material And Labour For Screed Bed Or Bedding Layer Of Mortar 15 Mm Thick In Cm 1:6 For Laying Floor Finishes Etc Complete All As Specified And As Directed , Material And Labour For 100Mm Thick Cement Concrete 1:2:4 Type B-2 (Using 40Mm Graded Stone Aggregate ) As In Flooring, Hardstanding Complete All As Specified And Directed. , Material And Labour For 100 Mm Thick Plain Cement Concrete 1:4:8 Type D2 (Using 40Mm Graded Stone Aggregate) In Foundation, Floor Etc Complete All As Specified And Directed. , Material And Labour For 25 Mm Thick Plain Cement Concrete (1:2:4) Type B0 (Using 12.5 Mm Graded Crushed Stone Aggregate) As In Floor Finished Rough To Receive Tiles Complete All As Specified And As Directed. , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Etc Complete All As Specified And As Directed , Material And Labour For Rendering For Ceiling 5 Mm Thick In Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surface Finished Even And Smooth Without Using Extra Cement Etc Complete All As Specified And As Directed , Material And Labour For Rendering 15 Mm Thick In Cm (1:4) On Fair Faces Of Brick Work Or Concrete Surface Finsihed Even And Smooth (Without Using Extra Cement) Mixed With Water Proofing Compound As Per Manufacture Instruction Etc Complete All As Specified And As Directed Notes : Wpc Shall Be Measured And Paid Seperately , Material And Labour For Preparing New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Ove A Coat Of Cement Primer Etc Complete All As Specified And As Directed , Material And Labour For Preparation New Plastered Surface Of Wall And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance (Apex Ultima), Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Newly Plastered Surface Of Ceiling And Applying Three Coats Of White Wash Including Preparation Complete All As Specified And As Directed. , Complete Removal Exising Treatment By Means Of Wire Brushing, Sand Paper, Manually Or Mechanically Up To Visible Of Plastered Surface Incl Rubbing And Washing Etc Complete All As Specified And As Directed , Material And Labour For Preparation Of Old Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Etc Complete All As Specified And As Directed , Material And Labour For Preparation Old Plastered Surface Of Wall And Applying Two Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance (Apex Ultima), Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Over New Surfaces. Etc Complete All As Specified And As Directed , Material And Labour For Preparation New Of Previously Un Treated Steel And Iron Surface Of Any Description, Over 10 Cm In Width Or Girth , Not Otherwise Described And Painting With Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Etc Complete All As Specified And As Directed , Supply And Fix 110 Mm Pvc, Swr Pipes, Single Socketed In Any Length With Rubber Ring Joint Fixed To Walls/Floor Etc Etc Complete All As Specified And Directed , Supply And Fix 75 Mm Pvc, Swr Pipes, Single Socketed In Any Length With Rubber Ring Joint Fixed To Walls /Floor Etc Complete All As Specified And Directed , Supply And Fix Pvc Bends (Any Radius) Of 110Mm Dia With Access Door Etc Complete All As Specified And As Directed , Supply And Fix Pvc Bends (Any Radius) Of 75Mm Dia With Access Door Etc Complete All As Specified And As Directed , Material And Labour For Spraying Antiweed / Non Toxic Solution / Chemicals Containing Glyphosate As Per Manufacture Instructions And Removing The Weed Including The Roots After Ensuring Complete De-Germification Of Palnt/Weed And Cutting Down The Plant/Trees Off From Roof/Top Sides Of External Walls Of Bldgs, In Chajjas, Wall Junctions, Junctions Of Gi/Ci/Ac/Pvc Pipes And Taking Out Roots Entered In Wall/Slabs, Including Making Good The Surface Using Plain Cement Concrete 1:2:4 Type B1 Or Cement Mortar (1:2) Or Brick Work In Cm(1:4) Plastered With Cm(1:4) To Match With Existing Surface And Repairing The Pipes And Joints Which Was Affected By Cutting Down/Taking Out Process All As Specified And As Directed For Plants / Trees Located In The Buildings At Any Height Of Bldgs, Complete All As Specified And Directed. , Maintenance/Cleaning Of Masonry Of Concrete Drains ( Cross Sectional Area Not Exceeding 1.20 Sqm) By Desilting Of All Deposited Soil/Silts And Other Materials Including Removing All Vegetation From Side And Bottom Of Drains To A Distance Exceeding 250M And Not Exceeding 500M And Depositing In Layers Not Exceeding 25Cm Thick Complete To The Original Shape Of Drains And Free Flow Of Water And Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 3
12.
Health and Family Welfare #11375574 AOC
Repairs To Central Medicine Store Building At Nizamabad In Nizamabad District-33.97 Dismantling, Clearing Away And Carefully Stacking Useful Materials For Re-Use And Disposal Of Unserviceable Materials With 100M Lead As Directed By Executive Engineer Duly Taking Actual Premeasurements Before Dismantling Including All Labour Charges , Etc., Complete. Unreinforced Cement Concrete Up To 15Cm Thickness 120.00 Kadapa Slabs Or Shahabad Stone Slabs On Sand Bed 9.00 Earth Work Excavation For Foundations ( Mechanical Means ) For Buildings In Ordinary Soils And Depositing On Bank For All Lifts And With An Initial Lead Of 10M And Up To 3M Depth Including All Operational, Incidental, Labour Charges Such As Shoring, Sheeting, Planking, Strutting Etc., Complete For Finished Item Of Work Excluding Dewatering Charges Etc., As Per Ss 20 B ( Apss 308 ) . 21.12 Plain Cement Concrete ( 1:5:10 ) ( Cement: Fine Aggregate: Coarse Aggregate ) For Foundations And Under Flooring Bed Using Coarse Aggregate 40Mm Size Hard , Machine Crushed Granite From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Sand, Coarse Aggregate, Water Etc. To Site, Sales & Other Taxes On All Materials And Including All Charges For Machine Mixing, Laying Concrete In Foundations And Under Flooring Bed, Ramming In 15 Cm Layers Finishing Top Surface To The Required Level Curing Etc., Complete For Finished Item Of Work. ( Apss No. 402 ) . 1.35 Supply And Placing Of The Design Mix Concrete M 25 Grade Corresponding To Is 456 With Minimum Cement Content Of 380 Kgs Per 1 Cum Of Concrete Using Concrete Batching Plant With 20Mm Size Graded Machine Crushed Hard Granite Metal ( Coarse Aggregate - As Per Is 383 - 1970 And Is 2386 Part 1 To Part 8 ) From Approved Quarry Including Cost And Conveyance Of All Materials Like Cement, Fine Aggregate ( Sand ) Coarse Aggregate, Water Etc., To Site And Sales & Other Taxes On All Materials, Centering Using Steel Scaffolding Pipes, Jack Props, Wallers, Foot Plates, Brackets, Steel Centering Plates Etc., Including All Operational, Incidental And Labour Charges Such As Weigh Batching, Machine Mixing, Laying Concrete, Curing Etc., Complete But Excluding Cost Of Steel And Its Fabrication Charges For Finished Item Of Work ( Apss No. 402 ) . Gate Footings 0.43 Pedstals 1.82 Gate Columns 2.93 Masonry Work In Cm ( 1:6 ) Prop ( Cement : Screened Sand ) In Superstructure With Fly Ash Cement / Lime Solid Blocks Of Size 290Mm X 225Mm X 140Mm From Approved Source Having Minimum Crushing Strength Of 50 Kg / Sqcm. Including Cost And Conveyance Of All Materials Like Cement, Sand, Bricks, Water Etc., To Site, Including Sales & Other Taxes On All Materials And Such As Labour Charges, Like Mixing Cement Mortar, Scaffolding Charges, Constructing Masonry, Lift Charges, Curing, Etc., Complete For Finished Item Of Work. ( Apss No. 501 & 504 ) . 0.50 Providing Thermo Mechanically Treated ( Tmt ) ( Fe -500 / 500D / 550D From Primary Producer Tata, Sail, Vsp, Jsw &Shyam Steel Etc As Per Is 1786-2008 ) Of Different Diameters For Rcc Works , Including Labour Charges For Straightening, Cutting, Bending To Required Sizes And Shapes, Placing In Position With Cover Blocks Of Approved Materials And Size And Tying And Lap-Splicing With Binding Wire Of 18 Swg, Forming Grills For Reinforcement Work As Per Approved Designs And Drawings, Including Cost And Conveyance Of Steel Bars, Including All Wastages Such As Overlaps, Couplings, Chairs, Spacer Bars Including Cost And Conveyance Of Binding Wire, Cover Blocks And All Incidental, Operational, Labour Charges Such As Cutting, Bending, Placing In Position, Tying Including Sales And Other Taxes On All Materials Etc. , Complete For Finished Item Of Work. ( Apss No.126 ) . 339.53 Flooring With 16 To 18Mm Thick High Polished Granite Stone Slabs Other Than Black And Regular Colours ( I.E. Of Shades Like Paradiso / Bala Flower / Copper Silk / Laka Red / Lavender Blue ) With Borders And Design As Per The Pattern Approved By The Engineer-In-Charge Of Length Not Less Than 2.43 Mts Set Over Base Coat Of Cement Mortar ( 1:8 ) , 20Mm Thick Using Screened Sand Over Cc Bed Already Laid Or Rcc Roof Slab Including Neat Grey Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kg Per Sqm And Jointed Neatly With White Cement Paste Mixed With Pigment Of Matching Shade To Full Depth Including Cost And Conveyance Of All Materials Like Cement , Sand , Water , Granite Slabs Etc., To Work Site And All Operational, Incidental Labour & Lift Charges, Polishing Charges And All Other Taxes On All Materials, Cost Of Base Coat Complete For Finished Item Of Work ( S.S.701 & Special ) Ground Floor 120.00 Supply Of Precast Concrete Blocks For Paving Of M-35Grade And Thickness Not Less Than 60 Mm For Very Heavy Traffic Areas Conforming To Is 15658:2006 In All Shapes And Designs Of Any Shade As Approved By Engineer-In-Charge Set Over Base Coat Of Cement Mortar ( 1:6 ) , 12 Mm Thick Using Screened Sand Over Cc Bed Alredy Laid Or Rcc Roof Slab Including Neat Cement Slurry Of Honey Like Consistency Spread @ 3.3 Kgs Per Sqm And Jointed With Neat White Cement To Full Depth Mixed With Pigment Of Matching Shade Including Cost And Conveyance Of All Materials Like Cement, Sand, Water And Tiles Etc., Complete For Finished Item Of Work. Ground Floor 33.75 Supply And Fixing Ornamental Ms Main Gate Of Size 9Mts X 3.75 Mts ( Average Height ) I.E., Varying From 3Mts To 4.50 Mts At Centre As Per The Approved Drawing Using Ms Angle Of 75Mm X 75Mm X 6Mm Alround For Frame And 63Mm X 6Mm Ms Flats In 6 Rows Horizontally, 25Mm Ms Square Bars At 125Mm C / C And Ci Spikes 9 Long On Top And 6 Long Ci Spikes In The Middle In Two Rows Including 6 Nos Of Pin Clamps Fixed In Rcc Columns, 2 Nos Of Ms Aldrops 450 Mm Long ( Special ) Welded At The The Centre On Each Side, 2 Nos Of Ms Tower Bolts 450Mm Long ( Special ) And Providing Brass Emblem On Emboseed Cover In The Centre Of The Two Leaves And Fixing 2 Nos. Of Rollers Per Each Leaf Including Cost And Conveyance Of All Materials, Fabrication Charges , Welding Charges, Incidental Charges And All Labour Charges, Etc., Complete For Finsihed Item Of Work. 30.00 Supply And Laying Of Isi 25Mm Outer Dia Medium Grade, With Is:9537 Part 3 Rigid Pvc Concealed In Wall With All Required Pvc / Metallic Junction Boxes Including Masonary Work And Labour Charges Etc., Makes:- Sudhakar / Finolex / Modi / Vip / Precision / Universal / Million Plast / Gold / Polycab / Dec. 5.00 Wiring With Run Of 2 Of 1.5 Sqmm Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specification For Copper Cable. In Existing Pvc Conduit Pipe Including Supply And Fixing Of Jumbo Ceiling Rose And 6A / 10A Isi Mark 1Way Modular Switch With Required Modular Box And Cover Frame In Existing Surface Or Concealed Pipe Wiring Including Cost And Conveyance Of All Material And All Labour Charges Etc., Complete For Light, Fan, Exhaust Fan And Bell Points In N.R.B. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) . / Dec ( Hffr ) . Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 10A 3 / 2 Pin 2 Module Modular Socket With Shutter With 6 / 10A 1 Way 1 Module Modular Switch, 3 Module Box With Cover Frame In Common Switch Board Including Cost And Conveyance Of All Materials And All Labour Charges Etc., Complete In N.R.B. / R.B. Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 6 / 10A 1 Way 1 Module Modular Switches - 2 Nos And 10A 3 / 2 Pin 2 Module Modular Socket With Shutter - 2 Nos Modular Type With Cover Plate And Gi Switch Box Fixing On Separate Board Including All Labour Charges Etc., Complete. Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 2.00 Supply And Fixing Of 16A / 6A 2 Module Combi Socket Modular Socket With Shutter With 16A / 20A 1 Way 1 Module Modular Switch Fixed On Suitable Size Modular Box With Required Cover Frame Including With Connections, Cost And Conveyance Of All Material And All Labour Charges Etc., Complete Makes Of Switches : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T- Englaze. 50.00 Supply And Run Of 3 Of 2.5 Sq.Mm ( Phase, Neutral And Earth ) Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specifications For Copper Cable Of In Existing Pipe. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) / Dec ( Hffr ) . 50.00 Supply And Run Of 3 Of 4.0 Sq Mm ( Phase Neutral And Earth ) Frlsh / Hffr Pvc Insulated 1100V Grade As Per Is:694 / 1990, Is 17048 Specifications For Copper Cable Of In Existing Pipe For Power Points And Ac Sockets Inlcuding All Labour Charges Etc., Complete. Makes Of Wires : Finolex / Rr Kabel / Havells / Polycab / Finecab Gold ( Hffr ) / Gm ( Hffr ) / Gold Medal ( Hffr ) / Million ( Hffr ) / Kei ( Hffr ) / V-Guard ( Hffr ) / Dec ( Hffr ) . 10.00 Supply, Transportation And Fixing Of 22W + / 10% , > / 2300 Lumens, 1200Mm Length Led Light Housing Made With Alluminium Anodised Body, Wide Operating Voltage With Pf≥0.9, Surge Protection: > 2Kv, Thd<10%, With Inbuilt Driver And Frosted Cover Cct: 3000K - 6500K As Desired By The Department As Per Is, Minimum Cri≥80 Etc., Complete With 5 Years Warranty With Bis Certification With Bis Certification Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 2.00 Supply, Transportation And Fixing 32-36W ( >=3240 Lumens ) Edge Lit, 2 X2 ( 600Mm X 600Mm ) Slim Panel Recessed / Surface Led Luminaire Square Housing Made Of Aluminum Alloy With Corrosion Resistant Powder Coat, With High Efficiency Acrylic Wide Diffuser, With Wide Operating Voltage Range, Power Factor > 0.9, Surge Protection >2Kv, System Efficacy Of >90 Lumens / Watt, Cct: 3000K - 6500K As Desired By The Department, Cri >80, And Thd Is Less Than 15% With Non Integrated Driver Etc., Complete With 2 Years Warranty With Bis Certification. Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 5 Supply, Transportation And Fixing Of 18 W + / -10% ( >= 1800 Lumens ) Back Lit Led Down Light Recessed / Surface Mounting Round / Square With Housing Made Of Powder Coated Pressure Die Cast Aluminium Housing With Extended Heat Sink, With Protruded High Efficiency Diffuser, Ip20, With Wide Operating Voltage Range, Power Factor > 0.9, Surge Protection: > 2Kv, System Efficacy Of >100 Lumens / Watt, Cct: 3000K - 6500K As Desired By The Department And As Per Is, Cri >80, And Thd Is Less Than 15% Etc., Complete With 5 Years Warranty With Bis Certification. Luminaire Make: Phillips / Osram / Ge Venture / Wipro / Crompton / Bajaj / Havells / Jaquar / Panasonic / Halonix / Hpl. Led Make : Philips Lumileds / Cree / Nichia / Osram / Samsung / Lg Leds. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 171 Supply, Transportation And Fixing Isi Mark Batten Holder / Slanting Holder Makes : Anchor / Gold Medal Olive / Million Zoom In Lieu Of Ceiling Rose Of Light Point Complete With All Connections And All Labour Charges With 5W Led Lamp. Led Lamp Makes: Phillips / Osram / Crompton / Eveready / Bajaj / Havells / Halonix / Jaquar / C&S / Gm / Gold Medal / Million / Syska. Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 3 Supply, Transportation Of Energy Efficient Decorative Fan, 1200 Mm Sweep, Aluminium Body, Consuming 28 W, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current ( Bldc ) Motor, Class Of Insulation: B, 3 Nos Blades, 30 Cm Long Down Rod, 2 Nos Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Greater Than 0.90, Service Value ( Cmm / W ) Greater Than 8.5, Air Delivery Minimum 235 Cmm, 350 Rpm ( Tolerance As Per Is:374-2019 ) , Thd Less Than 10%, Remote Or Compatible To Electronic Step Type Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise = 75 Degree C ( Max ) , Insulation Resistance More Than 2 Mega Ohm, Suitable For 230V, 50 Hz, Single Phase Ac Supply, Earthing Etc., Complete. Makes : Atomberg ( Efficio + ) / Havells / Orient / Rr / Halonix Make & Model Will Be Approved By The Head Office / Engineer-In-Charge. 3 Supply And Fixing Of Modular Type Stepped Electronic Regulator For Sweep Ac Ceiling Fans Of 1200Mm / 1400Mm Complete With Connections. Makes : Legrand Arteor / Schneider Zen Celo / Honeywell Blenge Plus / Crabtree Amare / Logus Platina / Gold Medal Gifa / Gm-Zenova / L&T Englaze. 3 Labour Charges For Fixing Of Ceiling Fan Including Giving Connections With Twin Core Wire Etc., Complete. 2 Supply, Transportation Of 12 ( 300Mm ) Isi, 900 Rpm Heavy Duty Exhaust Fan With Metallic Blades Wiremesh With All Accessories Etc Complete. Makes : Crompton / Almounard / Havells Turbo Force. 3 Supply, Transportation And Installation Of Split Ac Unit With High Wall Mounted 100% Copper Indoor Unit And Outdoor Condencing Unit Hermetically Sealed Compressor Suitable For Operation On 230V, 50Hz, 1Phase Ac Supply Capable Of Performing Cooling Dehumidifying Air Circulating And Filtering With Cooling And Condensing Units With 3.0 Mts Of Copper Piping, Insulation Kit And 4 Mts Of 3 Core Copper Flexible Chord ( Voltage Range 160- 264 Volts ) And Cordless Remote Control With 5 Years Warranty Compressor And Comprehensive Maintenance For 2 Years. 1.5 Tr 3 Star Capable Of Delivering 18000 Btu / Hr Makes: Carrier / Daikin / Blue Star / Hitachi. 3 Supply And Erecting Fully Automatic Line Voltage Stabilizer For Operation On Input Voltage 200 To 250V. Rated For 4 Kva Maximum Load And Time Delay Model With Volt Meter, Selector Switch, 6A / 16A Flush Type, 5 Pin Socket For Out Put And With 3 Core Flexible Chord And 3 Pin 6 / 16A Plug Top Suitable For Refrigerator For Continuous Operation Including Cost And Conveyance Of All Mateials And All Labour Charges Etc., Complete. Makes : V-Guard / Real Guard / Uni Stab / Itl.
Contract Date: Ref. Documents Contract Value : 19.36 Lakh
Government Departments No of Bidders 1
13.
Defence #11344413 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Hard/Dense Soil, Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Excavating In Post Holes Each N Exc 0.5 Cum Getting Out, Returning Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceedings 25Cm Watering And Removing Surplus Soil To Distance N Exc 50 M And Making Good Surface In Hard/Dense Soils Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point, Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Timber Scantling 40 Sqcm And Over In Section In Any Position Framed Work, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Unframed Work In Fillets, Rails, Posts, Rafters, Purlins Etc Under 40Sqcm In Section, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Boarding Any Description, Fixed With Any Position With Nails, Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness Including Nanital Pattern Or Similar Pattern Roof Covering, Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63 Mm Of Broken Stone Or Boulders, Deposited, Spread And Levelled In Layers N Exc. 15 Cm Thick, Watered And Rammed To A True Surface, Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Plain Cement Concrete Type C2, 1:3:6 (40Mm Graded Aggregate) (M-10) As In Foundation , Filling And Mass Concrete And Similar Work , All As Specified And Directed. , M&L Foer Plain Cement Concrete Type B2, 1:2:4 (40Mm Graded Stone Aggregate) As In Foundations, Filling And Mass Concrete, Complete All As Specified And Directed. , M&L For Type C1, 1:3:6 (20Mm Graded Aggregate) Pre-Cast Cement Concrete Block Masonry With Solid Blocks, Exc. 10 Cm In Width And Setting In Mortar, Complete Complete All As Specified And Directed. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangula Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Chowkhats With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4.00 Sqm Each, Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Wall/Ceiling Panelling And Similar Work Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cemtn And Fixing At Sit Eon Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thnick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Work As Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed By Engr-In-Charge. , S&F Bands, Straps, Supports Or Stays For Rainwater, Ventilating Pipes, Including Bolts, If Required Hooks (Stay), Heavy, For Large Gates; Hook And Pintle Hinges: Large Hasps And Staples; Chains; Hand Made Sliding Bolts; Clamps; Hold Fasts; Wall Ties; Hooks For Hanging Fans; Plain Angle Cleats For Securing Purlins To Wood Trusses Or Rafters; Knee Piece Inserts; Two Way And Three Way Straps, Plate Washers And Similar Small Articles Conforming To Fe-290 Gde-E-165, Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Plate Girder Or Single Stanchions Built Up Of One Beam Or Channel Section With Flange Plates, Caps, Bases, Splices, Angle Brackets, Cleats And Other Connections Conforming To Fe-290Complete All As Specified And Directed. , S&F For S&F Steel Work In Tubular Trusses Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161 1979 Grade St.-240, Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised, Corrugated Mild Steel Sheeting With Two Corrugations Side Lap,Fixed With Coach Screws And Washers In Roof, Walls Etc With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F 0.80Mm Thick Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings (Length And Girth As Fixed) With Grade Of Zinc Coating 275, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/ Cladding To Wall Fixed With Self Tapping Screws As Specified, Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 6Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Nails To Timber Frame Work (05 No Of Ply), Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Sub Base Or Flooring Complete All As Specified And Directed By Engr-In-Charge. , M&L For 100Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Stone Aggregate) As In Floors Or Sub Base, Complete All As Specified And Directed. , M&L For 25Mm Thick Plain Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For 40Mm Thick Plain Cement Concrete Type B-0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors, Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Tiles In Vertical Surface 350X 250X 7Mm/ 450X 350X 7Mm Thick Set And Jointed In Neat Cement Slurry And Pointed In White Or Colour Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.06 Sqm But Not Exceeding 0.11 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Non - Skid Ceramic Coloured Tiles 7 To 8 Mm Thick(Square/Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , M&L For Virified Ceramic Tiles 10 Mm Thick, Light Shade (Square/ Rectangular) Polished, Area Of Each Tiles Not Exceeding 0.36 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Complete All As Specified And Directed By Engr-In-Charge. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Premises, Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 As Backing Coat Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete Complete All As Specified And Directed. , M&L For Screed Bed Or Bedding Layer Of Mortar 15Mm Thick For Laying Floor Finishes In Cm 1:6, Complete All As Specified And Directed. , Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc.Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Alkali Resistance Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of Old Wooden Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of Old Steel Surfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Steel Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide, Zinc Crome Complete All As Specified And Directed By Engr-In-Charge. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , M/L For Point Wiring In Casing Caping With 1.5Sq Mm Frls Pvc Insulated Unsheathed Single Core Multithreaded Copper Conductor Cable 1100 Volts Grade Incl 1.5 Sq Mm Pvc Insulated Unsheathed Copper Conductor Cable As Earth Continuity Conductor Drown Through In And Incl Casing Caping With Its Accessories Pressed Steel Terminal Box Incl 3Mm Thick Isi Marked Laminated Sheet Cover For Fixing Switches/Socket/Regulators Etc For The Following: - One Light/Fan Point Controlled By One No Piano Type Switch 5 Amps Single Pole One Way , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On The Same Board. , One Socket Outlet 5/3 Pin 6 Amps Controlled By One Switch On Independent Board. , All As Per Item No 1 Above But One 3 Pin Socket Out Let 15/16 Amps With Three Nos Single Core Unsheathed Pvc Insulated Cable Multistranded Copper Conductor Of Size 2.5 Sq Mm For Phase, Neutral & Earth Continuity Conductor. , S&F Switch Piano Flush Button Single Pole One Way 5/6 Amp. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal , S&F Switch Socket Combination 2 In 1, 6A Flush Type , S&F Ceiling Rose Surface Bakelite 65Mmx50mm 10 Watt Three Terminal. , S&F Sheet Metal Enclosure Double Door For Mcb Db Single Pole And Neutral 8 Way With 200 Amps Rated Bus Bar 240 Volts Double Door (Metallic) Type Including Taking Down Old Unserviceable Mcb Db With Mcbs. , S&F Mcb Spn 32 Amps 240 Volts C Series, 10 Ka, 50 Hz. Make:- As Approved Make Of Db , S&F Mcb Sp 5 To 32 Amps 240 Volts C Series, 10 Ka, 50 Hz Including Connection In The Db And Testing/Commissioning. Make:- As Approved Make Of Db , Supply And Fixing Led Lights Fitting 1X 18W, 4 Feet, 220V,Ac Decorative Box Type With Driver, Holder Including Led Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete. , Supply And Fixing Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. , Supply And Fixing Led Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Complete. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 16 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , Supply And Laying Or Fixing Or Passing Through Pipexlpe Insulated, Armoured Heavy Duty Electric Cable With Aluminium Conductor, 1100 Volts Grade Of Size 4 Sqmm 2 Core Complete Including Taking Out Old Unserviceable Cable All As Specified And Directed By Engineer In Charge. , S&F Dwc Pipe 63/50Mm Size All As Specified And Directed By Engr-In-Charge. , Material And Labour For Earthing Complete With Galvanized Steel Earth Plate Electrode 600 X 600 X 6 Mm Thick Buried Directly In Ground( Earth Pit Not Less Than 2.25 Meter Deep Below Ground Level) With Top Edge Of Plate Not Less Than 1.5 Meter Below Normal Ground Level, Connected To Galvanised Earth Lead Wire 4.0Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanized Iron Or Steel, All As Shown In Electrical Plate No 3 Of Ssr Pt I Including Necessary Excavation And Earth Work Plain Cement Concrete (1:3:6) Type C-1 With 50 Mm Thick Pre Cast Reinforced Cement Concrete ( 1:2:4) Type B-1 Cover Slab Framed With 50X30x4 Mm Ms Angle (Reinforced With 6 Mm Dia Deformed Bar @ 15 Cm C/C Both Ways And Suitable Handle Of 10 Mm Dia Round Bar) Including Providing Charcoal Or Coke And Magnesium Sulphate In Alternate Layers Of 15 Cm Compacted Thickness All Around The Earth Electrode, With Funnel And 20 Mm Bore Galvanized Iron Watering Pipe (Medium Grade) Wire Mesh, Copper Lugs, Complete In All Respect., Gi Earth Wire Protected By 40 Mm Bore (Light Grade) Galvanized Iron Pipe And Other End Connected To The Earth Bar (Test Point) Made Of Ms Flat (400X32x6 Mm) Bend In ‘D Shape And Fixed To Wall By Means Of Fast Nut Or Bolt Grouted In To Wall At 1 Mtr From Plinth Height. 4Sqmm Pvc Insulated (Colour Green) Copper Conductor Single Run As Earth Continuity Conductor Along With 15 Mm Pvc Conduit Grouted In Wall Or Fixed On Wall Surface To Be Continued Up To Main Switch Board And Fix With Common Earth Dolly As Directed By Eic . Disposal Of Soil To A Distance Not Exceeding 50 Mtr And Necessary Testing On Completion Complete Including Taking Out Old Unserviceable Earthing Materials All As Specified And As Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
14.
Power #11334917 AOC
Tit-bit civil work along with Repair and Maintenance of Chakdha (west) CCC Building. (Estimate as per P.W.D. S.O.R.Vol I &II for the area of Kalyani Sub-Division in the district of Nadia w.e.f. 01.11.17 and all other corrigenda uptodate ) - 1 Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m .a) In ground floor including roof 2 b) In first floor 3 Dismantling all types of masonry excepting cementconcrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directedwithin a lead of 75 m.a) In ground floor including roof 4 b) In first floor 5 Dismantling all types of plain cement concreteworks, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75m.In ground floor including roof.(a) upto 150 mm. thick 6 b) In first floor 7 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof 8 b) In first floor 9 Earth work in excavation of foundation trenches ordrains, in all sorts of soil (including mixed soil butexcluding laterite or sandstone) including removing,spreading or stacking the spoils within a lead of 75 m.as directed. The item includes necess-ary trimming thesides of trenches, levelling, dress-ing and ramming thebottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm 10 Earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layer complete. (Payment to be made on the basis ofmeasurement of finished quantity of work)(a) With earth obtained from excavation of foundation 11 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 12 Cutting holes and subsequent mending good damages. (a) Diameter upto 150 mm. (i) In brick work [Cement-4.0 Kg/Mtr] 13 Cutting chase upto 125 x 150 mm. and subsequentmending of damages.(a) in brick wall [Cement-3.6 Kg/Mtr] 14 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineerin charge. 15 Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. 16 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any as per relevant IS codes. a) Pakur Varietya) In ground floor 17 b) In first floor 18 Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominalsize) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codesPakur variety 19 1st floor 20 Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Varietya) In ground floor 21 Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.a) For works in foundation, basement and upto roof of ground floor / upto 4m.(iii) other manufacturers not specified. 22 Brick work with 1st class bricks in cement mortar (1:6)a)in foundation & plinth 23 In Super structure, ground floor 24 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.a) In ground floor 25 b) In first floor 26 Supplying, fitting & fixing 1st quality Ceramic tiles in wallsand floors to match with the existing work & 4 nos. of keystones (10mm) fixed with araldite at the back of each tile &finishing the joints with white cement mixed with colouringoxide if required to match the colour of tiles includingroughening of concrete surface, if necessary or by syntheticadhesive & grout materials etc.(B) Wall-------------------------With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m-----------ii) Other than Coloured decorative including white----------i) Gr.floor 27 A) FloorWith Sand Cement Mortar (1:4) 20 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m& joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m----- Other than Coloured decorative including white-------i) Gr.floor 28 Supplying and laying true to line and level vitrified tiles ofapproved brand (size not less than 600 mm X 600 mm X 10mm thick) in floor, skirting etc. set in 20 mm sand cementmortar (1:4) and 2 mm thick cement slurry back side of tilesusing cement @ 2.91Kg./sqM or using polymerised adhesive(6 mm thick layer applied directly over finished artificial stonefloor/Mosaic etc without any backing course) laid afterapplication slurry using 1.75 Kg of cement per sqM belowmortar only, joints grouted with admixture of white cementand colouring pigment to match with colour of tiles / epoxygrout materials of approved make as directed and removal ofwax coating of top surface of tiles with warm water andpolishing the tiles using soft and dry cloth upto mirror finishcomplete including the cost of materials, labour and all otherincidental charges complete true to themanufacturer sspecification and direction of Engineer-in-Charge. (Whitecement, synthetic adhesive and grout material to be suppliedby the contrr]e)I(I) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back sideof tiles, 0.2 kg/ Sq.m white cement for joint filling withpigment.(A) Light colour(Gr.floor) 29 (ii) First floor 30 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick)----------(i) Ground floor 31 In 1sl floor 32 Labour for taking out door and window frame including shutter for repair orreplacement of different parts of the frame & refixing the same including mendinggood all damaes complete. (Concrete and brick work for mending damage will bepaid separately)(a) Upto area 2.5 Sq.m 33 M.S. or W.I. ornamental grill of approved design joints continuously welded with M.S. W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.i) Grill weighing above 16 Kg./sqm------------a) In ground floor 34 b) In first floor 35 Removing old scales, blisters etc. of interior surface of walls,ceiling by scraping etc. and preparing smooth and even surface with rendering or cement mortar (1:2) (as necessary), to make the surface suitable for receiving distemper. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 36 1st floor 37 M.S. structural works in columns, beams etc. with simple rolledstructural members (e.g. joists, angle, channel sections conformingto IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineer-in charge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make andbrand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section,consumables such as electrodes, gas and hire charge of all tools andplants and labour required for the work including all incidentalchages such as electricity charges, labour insurance charges etc 38 Supplying, fitting and fixing windows and ventilators with or withoutintegrated grills conforming to IS 1038-1975 and manufacture from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket,handle plate etc, including hoisting in position,straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing fixed with neceessary clamps and nuts and bolts and erected complete.(ii) below 50mm.Fixed type steel windows as per IS sizes with horizontal glazing bars 39 (b) Openable steel windows as per IS sizes with side hung shuttersand horizotal glazing bars. [The extra rate admissible for theopenable portion only] 40 steel peg stay 300 mm long including fitting and fixing. 41 Two point nose steel handle including fitting and fixing. 42 Taking out M.S. or W.I. Grills from wooden frame including cuttinglugs from masonry wall and refitting the same and mending gooddamages after repairs. (Excluding the cost of necessary repair ofdamages) or doing any other necessary works 43 Easing, oiling and adjusting the steel shutters including scraping allmembers and fitting so as to make the shutters easily operable (noextra payment will be made for taking out and fixing glass, ifnecessary). 44 Renewing M.S. members of steel shutters by welding including takingout the old, mending good damages complete, including taking outand refixing the glass panes. 45 Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals).(c) Sal : Locala) In ground floor 46 Panel shutters of door and window, as per design (each panel consisting of singleplank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.In ground floor.(In case of non-supply of single plank, penal rate of reduction of 20% will be made)iii) 35mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak. 47 Brass floor door stopper. 48 Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed. a) With continuous plate base (Hexagonal / Round rod), (i)75 mm grip x 10 mm dia rod. 49 Iron butt hinges of approved quality fitted and fixed with steel screws, with ISImark.vi) 100mm. X 75mm. X 3.5 mm 50 Anodised aluminium barrel / tower / socket bolt (full covered) of approvedmanufactured from extruded section conforming to I.S. 204/74 fitted and fixedwith cadmium plated screws:ix) 300mm long x 10mm dia. bolt. 51 Anodised aluminium Aldrop / Sliding bolts of approved quality manufacturedfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixed complete.----------300mm x 16mm dia. Bolt 52 Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. 53 PVC Door Shutter-37 mm thick-Supplying fitting and fixing P.V.C. door shutter of approved quality & shade in position, the style & rail of the P.V.C. door shutter will be made of rigid P.V.C. multicavity hollow chamber of suitable size and section with 2.0 mm (+/-0.2 mm) wall thickness, the section will have 2nos. built in beads, horizontal & vertical section shall be fixed to each other by self tapping screws and 2 nos. of solid plastic or M.S. tubular galvanised brackets of length 200mmx80mm and other100mmx100mm both 1.20 mm in each corner of the shutter frame for placing hinges. Polymer based multicavity hollow section of 105 mm x37mm with 2.0 mm (+/- 0.2 mm) wall thickness will be fitted in the middle as lock rail reinforced by solid polymer bar of 200 mm long at both ends abd screws from both sides. The section frame will then be fitted in by PVC panels of size 100 mmx20 mm with wall thickness of 1.2 mm (+/- 0.2 mm) and 2 nos. of 6 mm dia and screws from both sides 6mm dia bright rod will be inserted horizontally with both side check and nut system and stretches where fixing of hinges / hasp bolt / tower bolt / door ring are required to be strong enough to with stand wear and tear. The rate is inclusive of cost of all materials, labour, and hire of tools and plants and appliencies. Carriage of all materials taxes and all other incidental charges complete.The rate is exclusive of cost of hinges, hasp bolt, tower bolt,door ring etc. In ground floor. 54 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).In 10-12 Micron thickness Annodizing film. i)natural White k) Movable door shutter .Door frame (top & sides) 55 ii) Shutter :Top rail 56 Bottom rail 57 Door Vertical 58 Lock rail 59 Glazing cleap 60 Labour charge for fabrication and installation of composite door,window, partitions made from annodized extruded alloy aluminium sections for the following units:- (B) Partly glazed partly panelled or fully glazed single leaf alunminiumswing door made of extruded and annodized alloy aluminium sections, fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages,with top pin assembly of approve make and brand, fitted with in built locking arrangement, flush bolt, glazing clips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry setneoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge. 61 Supplying bubble free float glass of approved make and brandconforming to IS: 2835-1987. i) 4mm thick clear glass. 62 5mm thick clear glass 63 Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filledwith foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP) . (b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) 64 Supplying profiles of required section made of Aluminium AlloyExtrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - InCharge. (Payment will be made on finished length of the work).(A) In 10-12 Micron thickness Annodizing film. i)natural White j)Fixed partitions.(Unsupported length of vertical member upto 1.5 mtr. Height of both endsof vertical member restrained but panels within 0.9 sq.m.)Top,bottom & side member 65 Intermediate member. 66 Glazing clip. 67 Supplying heavy duty hydraulic double action floor spring along with toppin/set of pivots conforming to IS: 6315 or any approved make as perdirection of Engineer in charge. 68 Supplying heavy duty top pin/set of pivots of local make and approved by the Engineer-in-charge. (This item to be provided where floor spring not 69 Supplying concealed type heavy duty PVC headed aluminium tower boltfor double leaf doors as per approved make and brand as per direction ofEngineer-in-Charge.250 long 70 Supplying EPDM gusket of approved make and brand as per direction of Engineer in charge.(weatger gasket/woolpile) 71 Filling the gap in between aluminium frame & adjacent RCC / Brick/ Stone work by providing weather silicon sealant over 6mm dia backer rod of approved quality as per architectural drawings and direction of Engineer-in-Charge complete. Upto 5 mm depth and 5 mm width 72 Extra for each additional floor. 73 Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including, rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface including threading nosing and drip course where necessary.i) With 1:6 cement mortar.a) 20 mm thick plaster.in ground floor 74 a.2) In first floor 75 15 mm th.b.1) In ground floor. 76 b.2) In first floor 77 ii) With 1:4 cement mortar.c) 10 mm thick plaster.c.1) In ground floor 78 Neat cement punning about 1.5mm. thick in wall, dado, window sills, floor, drain etc. 79 Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc.(Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) 80 Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats)i) Standard Quality 81 Applying Exterior grade Acrylic Primer of approved quality and brand on plastered or concretesurface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior Immersion paint including scrapping and preparing the surface thoroughly, complete as per manufacturers specification and as per direction of E.I.C(i)One coat in ground floor 82 2) In first floor 83 Protective and decorative Acrylic exterior emulsion paint of approved quality, as per manufacturers specification and as per direction of EIC to be applied over acrylic primer as required.The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.b) NORMAL Acrylic Emulsionin ground floor(two coat) 84 2) In first floor(Two coat) 85 Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of paint. 86 a ) Priming one coat on timber or plastered or surface with synthetic oil bound primer of approved quality including smooth ening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 87 b ) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.) 88 (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary.(a) On timber or plastered surface : With super gloss (hi-gloss) - (iv) Two coats (with any shade except white) 89 (b) On steel or other metal surface :--------With super gloss (hi-gloss) ------(iv) Two coats (with any shade except white) 90 (iii) One coat (with any shade except white) 91 Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) 92 (ii) 4 mm thick 93 Renewing worn out putty of glass panes :(a) Panes not exceeding 0.2 Sq.m 94 Supply fitting approved type ventilator in position after cutting holes in walls setting in cement mortar, mending damages to wall and plaster and two costs of point of approved brand and shade.(b) R.C.C ventilator of 20 mm. thicki) Upto 0.10 Sqm. Area 95 Artificial stone in floor, dado, staircase etc with cement concrete(1:2:4) with stone chips, laid in panels as directed with toppingmade with ordinary or white cement In ground floor. (as necessary) and marble3 mm. thick topping (High polishing grinding on this item is notpermitted with ordinary cement).(ii) 25 mm th.(i) Ground floor 96 Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wallafter unscrewing bolts, nuts, screws etc.andstacking the material at site as directed. 97 Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:-b) With 0.60 mm thick sheet 98 (ii) In wall:-a) With 0.60 mm thick sheet 99 Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. 100 (f) 25 mm to 30 mm shuttering without staging in foundation 101 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming toIS:13592-1992 with all necessary clamps nails, including making holes inwalls, floor etc. cutting trenches in any soil through masonry concretestructures etc if necessary and mending good damages including joining withjointing materails (SpunYarn,Valamoi/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 102 B) UPVC Fittings:a) Plain Tee(ii) 110 mm. Dia 103 b) Plain Y(ii) 110 mm. Dia 104 c) Bend 87.5 degree (ii) 110 mm. Dia 105 d) Shoe c(ii) 110 mm. Dia. 106 Uprooting and removing plants from the surface of wallsparapet etc and making good damages. (Repairing ofdamages to be paid separately) 107 Renewing throating,nosing or drip course moulding with 15 mm.thick cement plaster (1:4) complete. (Cement 0.7Kg/Mtr.)In ground floor. 108 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in- Charge prior to execution will be necessary).(Payment to be made on area cleared) 109 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union cross, elbow nipple, long screw reducting socket reducing tee, short piece etc. fitted withholder bats clamps, including cutting pipes, making threads, fitting fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground (payment will be made on the center line measurements of total pipe line including all specials. No separate payment will be made for accessories, specials) FOR EXPOSED WORK15MM DIA MEDIUM QUALITY 110 ii) 20 mm dia medium quality 111 ii) 25 mm dia medium quality 112 Chromium plated round shower with revolving joint (Equivalent toCode No. 541(N) & Model - Tropical / Sumthing Special of ESSCO orsimilar brand). 113 Supplying, fitting and fixingpillar cock ofapproved make---CP pillar cock-15mm(Equivalent to Code No. 507 & Model -Tropical / Sumthing Special of ESSCO or similar brand) 114 Supplying, fitting, fixing G.M wheel valve of approved brand and made tested to 21 Kg. Per sq. cm. (for water lines only.) --- i)20mm. 115 ii)25mm 116 11)40mm 117 Supplying fitting fixing bib cock Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand). 118 b)i.Chromium plated Stop cock [Equivalent to Code No.513(A) & 513(B) & Model - Tropical/Sumthing of ESSCO or similar brand] 119 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver redas per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450 mm X 300 mm 120 Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. b) With S trap (with vent) 121 Supplying, fitting and fixing towel rail with two brackets.a) C.P. over brass.b) I) 25 mm dia and 450 mm long 122 Supplying, fitting and fixing 18 mm. thick marble partition slab with chawk doongri marble square cut, both sides polished with two front corners rounded and edges polished. 123 Supplying, fitting and fixing white vitreous china best quality approvedmake wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks,C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillarcock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approvedquality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approvedquality P.V.C. connection pipe with heavy brass C.P. nut includingmending good all damages and painting the brackets with two coats ofapproved paint.(i) 450 mm X 300 mm size 124 Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position complete excluding P orS trap (excluding cost of concrete for fixing).(i) 580 mm X 440 mm each 125 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. Specification withP.V.C fitting complete, C.I. brackets including two coats of painting to bracket etc. 126 Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make withnecessary fixing materials and clamps complete.i) Polythene Flush Pipe 127 Flat back urinal (half-stallin urinal)in white vitreous china ware of approved make (CERA/HINDWARE)supplied,fitted and fixed in position with brass screw on75mmx75mmx75mm wooden block complete. (i) 635 mm X 395 mm X 420 mm each 128 Supplying ,fitting and fixing approved brand p.v.c. connector white flexible ,with both ends coupling with heavy brass C.P.nut 15mm dia.(i) 300 mm long 129 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps.900 mm long 130 Approved patent vent cowl I.C.I. conforming to I.S.S.a) 75 mm dia. 131 Supplying PVC water storage tank approved quality with closed top with lid (block). Multilayer. a) 1500 Litre capacity. 132 Labour for dismantling (i) 15 mm 133 (ii) 20 mm 134 100 mm 135 Refixing GI pipe with fittings with cleaning wher necessary(i) 15 mm 136 (ii) 20 mm 137 Removing chokage in G.I pipe including cleaning pipe(i) 15 mm 138 (ii) 20 mm 139 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to match with and curing.15mm 140 (ii) 20 mm 141 Dismantling wash basin with brackets with or without waste fittings. 142 Dismantling E.P. or Anglo-Indian W.C. 143 Dismantling urinal. 144 Dismantling pillar cock of wash basin. 145 Cleaning glazed tiles with acid 146 Mazdoor 147 Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 and threaded to match withGI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings asrequired,jointing materials and two coats of painting with approved paintin any position above ground. (Payment will be made on the centre linemeasurements of total pipe line including all specials. No separatepayment will be made for accesories, specials. Payment for painting willbe made seperately)(a) For Exposed Work PVC Pipes 15mm 148 20 mm metredia 149 25 mm metredia 150 40 mm metredia 151 Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm 152 Supplying, fitting and fixing 15 mm swan neck tap with left & right handoperating nob with aerator (Equivalent to Code No. 510, 510(A) andModel - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand 153 Iron door ring of approved quality fitted and fixed with nut and washer complete. (i) 50mm dia. 154 Rendering the Surface of walls and ceiling with White Cement baseWATER PROOF wall putty of approved make & brand.(1.5 mm thick) 155 ii) Godrej Hydraulic door closer fitted and fixed complete.(c) Light type 156 Filling in foundation or plinth by fine sand inlayers not exceeding 150 mm as directed andconsolidating the same by thorough saturation withwater, ramming complete including the cost of supplyof sand. (payment to be made on measurement offinished quantity) 157 Removing sludge from septic tank, soak well etc. by methor labour including disposal of the same outside the compound as directed.(a) Upto 20 users:-(ii) Beyond a lead of 150 metre and outside the Municipal limit 158 Cleaning rubbish, sludge, weeds scum, liquid earth, mud etc.etc.from road side masonary drain/ hume pipe drain/ culvert etc. by mathor labour after removing concrete.Slab/manhole cover etc.without damaging the same and refixing the same properly after cleaning as necessary and removing the sludge etc.etc.by using iron pans,buckets including all labour, tools & plants including removing the spoils in dry condition and disposing the same by truck beyond the road side in conformity with municipal/corporation rules for such disposal including loading into truck and cleaning the road side in all respects as per direction of the Engineerin-Charge. 159 Renewing profile of rolling shutter including fitting fixing complete as per existing size and shape 160 Labour for taking out rolling shutter (only shutter portion) dismantling by parts for repair or (replacement of damaged parts only), rehanging and refitting the same in position after necessary repairs (excluding the cost of supply of new parts 161 Easing and oiling, cleaning collapsible gate and repairing to locking arrangements. 162 Easing and oiling, cleaning rolling shutters excluding repair to inside locks 163 Easing and oiling W.I. Gate or G.I. Gate. 164 Labour for hoisting plastic water storage tank.(i) Upto 1500 litre capacity.(a) Upto 1st story from G.L. 165 Extra for each additional story 166 Labour for lowering plastic water storage tank and stacking in places asdirected.(i) Upto 1500 litre capacity 167 (b) Extra for each additional story 168 Labour for punching hole in plastic water storage tank upto 50 mm dia 169 Labour for taking out (from fencing) line of wire (galvanised,strand or barbed) by drawing the same out through holes in thebody of the post or through holes formed by fixed staples.(Payment to be made on the length of the wire taken out.) 170 ) Supplying, fitting galvanised 3 ply 12 gauge / 4 points line ofbarbed wire in fencing (holes already made in the body of the post)or fixed by staples tightening and fixing the wires in taut conditionwith straining bolts including the cost of cutting and of lappingjoints in the wire as necessary but excluding the cost of galvanisedstaples,straining bolt and binding wire where necessary. 171 Supplying galvanised straining bolts (with eye at one end with double nuts and washers) fitted and fixed complete. (i) 10 mm. dia. (a) 150 mm 172 Supplying galvanised staples fitted and fixed complete. (a) 19 mm. to 25 mm. size
Contract Date: Jun 23, 2026 Contract Value : 5.85 Lakh
Government Departments No of Bidders 3
West Bengal View Result →
15.
Tourism #11320518 Technical Bid
Tender For Tourism Development Work Of Shri Ramjanaki Temple, Kotawari In Shahjahanpur District.-1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. All Kinds Of Soil Dsr-2.6.1 170.25 Cum 133.12 127.80 21757.52 In All Kind Of Soil Upto 1.5M To 3.0M. Depth 2.6.1+2.26.1 18.74 Cum 228.22 219.09 4106.24 In All Kind Of Soil Upto 3.0M To 4.5M. Depth 2.6.1+(2.26.1* 2) 6.37 Cum 323.31 310.38 1977.88 2 Excavation Of Foundation In Ordinary Soil (Loam Clay Or Sand) Including Lift Upto 1.50 Meter And Lead Upto 30 Meter And Including Filling, Watering And Ramming Of Excavated Earth Into The Trenches Or Into The Space Between The Building And Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Sur-Plus Earth As Directed By The Engineer Incharge Up To A Distance Of 30 Meters From The Foundation Trenches. Dsr-2.1.1 35.61 Cum 97.38 93.49 3329.14 3 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 And For All Lift. Dsr-2.25 8.70 Cum 147.00 141.12 1227.84 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete Dsr-2.25(A) 55.60 Cum 525.36 504.34 28041.40 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources) Dsr-4.1.8 70.78 Cum 5108.83 4904.47 347162.56 6 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr-2.27 26.31 Cum 1592.76 1529.05 40229.27 7 Diluting And Injecting Chemical Emulsion For Postonstructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration Dsr-2.35.3.1 194.47 Sqm 232.53 223.23 43411.24 8 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). Dsr-5.3 82.66 Cum 8628.83 8283.68 684729.10 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) Footing Dsr-5.1.2 21.98 Cum 6784.08 6512.72 143149.60 10 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Dsr-5.2.2 22.97 Cum 8139.44 7813.86 179484.39 Abstract Of Cost Delhi Schedule Of Rate Effective From 12/07/2023 X (0.735X106/107X1.03) Has Been Followed. Proposed Tourism Development Of Ramjanki Temple At Kotawari, Tilhar, Sahjahanpur, U.P. 11 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr-5.9.5 257.49 Sqm 552.28 530.19 136518.66 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr-5.9.3 407.10 Sqm 695.41 667.60 271778.96 13 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete Dsr-5.9.1 63.96 Sqm 294.10 282.34 18058.37 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Columns, Pillars, Piers, Abutments, Posts And Struts Dsr-5.9.6 208.86 Sqm 720.95 692.11 144554.66 15 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr-6.1.1 16.84 Cum 5527.80 5306.69 89341.45 16 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.1.2 51.30 Cum 5349.01 5135.05 263427.92 17 Providing And Laying Damp-Proof Course 50Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20Mm Nominal Size Derived From Natural Sources). Dsr-4.11 2.14 Sqm 371.80 356.93 763.83 18 Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Of Vg-10 Of Approved Quality Using 1.7Kg Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With A Piece Of Cloth Lightly Soaked In Kerosene Oil. Dsr-4.13 44.55 Sqm 109.61 105.22 4687.75 19 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Dsr-6.4.2 80.04 Cum 6829.23 6556.06 524747.32 20 Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Dsr-6.13.2 60.18 Sqm 842.82 809.11 48692.17 21 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More Dsr-5.22A.6 186.64 Qtl 8088.48 7764.94 1449250.34 22 15 Mm Cement Plaster On Plinth Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Coarse Sand) Dsr-13.5.1 65.74 Sqm 308.80 296.45 19488.62 23 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.5.2 252.10 Sqm 296.50 284.64 71758.35 24 12 Mm Cement Plaster Of Mix : 1:6 (1 Cement: 6 Coarse Sand) Dsr-13.4.2 609.85 Sqm 257.73 247.42 150888.63 25 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. Dsr-5.30 315.01 Rm 58.80 56.45 17781.09 26 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr-11.3.1 29.40 Sqm 460.63 442.21 13000.95 27 Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement.18 Mm Thick Dsr-11.6.1 3.35 Sqm 496.52 476.66 1596.81 26 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr-11.41.2 137.75 Sqm 1165.05 1118.45 154065.99 27 Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To |.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm Dsr-11.46.2 10.17 Sqm 1217.25 1168.56 11884.22 28 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr-11.37A 148.53 Sqm 812.00 779.52 115781.77 29 Providing And Laying Rectified Glazed Ceramic Floor Tiles Of Size 300X300 Mm Or More (Thickness To Be Specified By The Manufacturer), Of 1St Quality Conforming To Is : 15622, Of Approved Make, In Colours White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement: 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Dsr-11.39 4.40 Sqm 997.47 957.57 4213.30 30 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Ordinary Cement Without Any Pigment 11.20.4 6.12 Sqm 792.24 760.55 4654.54 31 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 35 Mm Thick Dsr-9.5.1.1 6.30 Sqm 3083.86 2960.50 18651.18 32 Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors,Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note: Butt Hinges And Necessary Screws Shall Be Paid Separately) 30 Mm Thick Dsr-9.5.1.2 83.22 Sqm 2810.38 2697.97 224524.67 33 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 (Part I) Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters: 35 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws Dsr-9.21.1 15.33 Sqm 1794.43 1722.65 26408.23 34 Providing 40X5 Mm Flat Iron Hold Fast 40 Cm Long Including Fixing To Frame With 10 Mm Diameter Bolts, Nuts And Wooden Plugs And Embedding In Cement Concrete Block 30X10X15Cm 1:3:6 Mix (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). Dsr-9.53 128.00 Nos 171.63 164.77 21090.11 35 Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding Dsr-9.48.1 937.05 Kg 164.32 157.75 147816.54 36 Providing And Fixing T-Iron Frames For Doors, Windows And Ventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. Fixing With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Block 15X10X10 Cm Of C.C. 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size). Dsr-10.13.1 100.80 Kg 106.27 102.02 10283.67 37 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35X5 Mm, Joints Mitred And Welded By Angle Iron 35X35X5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-In-Charge. Dsr-10.31 125.00 Kg 97.87 93.96 11744.60 38 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-Incharge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). Dsr 10.28 133.33 Kg 579.28 556.11 74146.05 39 Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately).(Sal Wood) Dsr-9.1.2 1.61 Cum 87387.28 83891.79 135065.79 40 Fixing Of Door, Windows/Ventilators Chaukhats In Position. (A) Door Chaukhats Above 1.5 Sqm To 5.0Sqm Mr 19.00 Nos 150.00 144.00 2736.00 (B) Window Chaukhats Above 1.5 Sqm 12.00 Nos 100.00 96.00 1152.00 (C) Ventilator Chaukhats 7.00 Nos 50.00 48.00 336.00 41 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade: New Work (Two Or More Coats Applied @ 1.43 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg/10 Sqm) Dsr-13.47.1 407.00 Sqm 128.32 123.19 50137.46 42 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr-13.41.1 434.15 Sqm 139.23 133.66 58030.01 43 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Dsr-13.80 841.15 Sqm 117.03 112.35 94505.07 44 Providing And Fixing Isi Marked Oxidised M.S. Sliding Door Bolts With Nuts And Screws Etc. Complete :250X16 Mm Dsr-9.62.2 11.00 Nos 145.27 139.46 1534.05 45 Providing And Fixing Isi Marked Oxidised M.S. Tower Bolt Black Finish, (Barrel Type) With Necessary Screws Etc. Complete : 250X10 Mm Dsr-9.63.1 21.00 Nos 62.92 60.41 1268.53 200X10 Mm Dsr-9.63.2 65.00 Nos 52.05 49.97 3247.81 46 Providing And Fixing Isi Marked Oxidised M.S. Handles Conforming To Is:4992 With Necessary Screws Etc. Complete :100 Mm Dsr-9.66.2 54.00 Nos 24.41 23.44 1265.50 47 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete Dsr-9.82 1.00 Nos 91.23 87.59 87.59 48 Providing And Laying Integral Cement Based Water Proofing Treatment Including Preparation Of Surface As Required For Treatment Of Roofs, Balconies, Terraces Etc Consisting Of Following Operations: (A) Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is. 2645 And Approved By Engineer-In-Charge Over The Rcc Slab Including Adjoining Walls Upto 300 Mm Height Including Cleaning The Surface Before Treatment. (B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineerin- Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Of Junctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge. (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix 1:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Is : 2645 And Approved By Engineer-In-Charge Including Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finishing The Surface With Trowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep. (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.“All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge : With Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65 Mm Dsr-22.7.1 198.55 Sqm 1263.41 1212.87 240815.58 49 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture Dsr-13.48.3 144.65 Sqm 128.02 122.90 17777.47 50 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture Dsr-13.48.2 209.70 Sqm 132.18 126.90 26610.03 51 Providing & Fixing Panes Of Glass With Equal Or Equivalent I.S.I Marked Quality Putty. Brads And Springs And Including Supply Of All Materials And Labour Etc Complete . 3.8 To 4.7 Mm Thick Dsr-10.30.1 44.76 Sqm 805.96 773.72 34631.80 52 Supply And Fixing Of Drop Down Rail / Grab Bars Mr 4.00 Nos. 4400.00 4224.00 16896.00 53 Providing, Driving With Hydraulic Piling Rigs With Power Units And Installing Driven Cast-In-Situ Reinforced Cement Concrete Piles Of Grade M-25 Of Specified Diameter And Length Below The Pile Cap, To Carry Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Shoe And The Length Of Pile To Be Embedded In The Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured From Top Of Shoe To The Bottom Of Pile Cap) : 400 Mm Dia Piles Dsr-20.1.1 48.00 Rm 2075.18 1992.17 95624.30 54 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 30 Mm Thick Dsr-8.14.1.5 50.74 Sqm 3971.79 3812.92 193478.98 55 Stone Work In Plain Ashlar In Super Structure Upto Floor Five Level In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) Including Pointing With Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade Both Face Dressed Red Sand Stone Dsr-7.12.1.1 3.56 Cum 51218.78 49170.03 175241.97 56 Extra For Stone Work Ashlar Sunk Or Moulded Or Sunk And Moulded Or Carved In : Triangular Or Square Or Rectangular Pillars Dsr-7.21.1 3.56 Cum 2834.15 2720.79 9696.89 57 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr-8.15 99.58 Kg. 535.78 514.35 51219.04 58 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) :Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing. 50Mm Dsr 8.14.1.3 37.80 Sqm. 4342.28 4168.59 157572.62 59 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 30.00 Nos. 32.92 31.61 948.21 60 Providing And Fixing Stone Jali 40 Mm Thick Throughout In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc. Red Sand Stone Dsr 7.33.1 4.50 Sqm. 11198.29 10750.35 48376.59 61 Stone Work, Plain In Copings, Cornices, String Courses And Plinth Courses, Upto 75 Mm Thick In Cement Mortar 1:6 (1 Cement : 6 Coarse Sand), Including Pointing With White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade.: Red Sand Stone Dsr 7.32.1 0.47 Cum. 70303.46 67491.32 31720.92 62 Carving & Engraving Work On Red Sand Stone (Labour Only) M.R. 9.73 Sqm. 15615.00 14990.40 145856.59 63 Manufacturing, Supplying And Fixing Retro Reflective Overhead Signage Boards Made Up Of 2 Mm Thick Aluminium Sheet, Face To Be Fully Covered With High Intensity And Encapsulated Lens Type Heat Activated Retro Reflective Sheeting Conforming To Type - Iii Of Astm-D-4956-01 As Approved By Engineer-In-Charge, Letters, Borders Etc. As Per Irc : 67-2001 In Silver White With Blue Colour Back Ground And With High Intensity Grade, Pasted On Substrate By Pressure Sensitive Adhesive Backing Which Shall Be Activated By Applying Pressure Conforming To Class Ii Of Astm-D-4956-01 And Fixing The Same To The Plate Of Structural Frame Work By Means Of Suitable Sized Aluminium Alloys, Rivets Or Bolts & Nuts @ 300 Mm Centre To Centre All Along The Periphery As Well As In Two Vertical Rows Along With Theft Resistant Measures, Including The Cost Of Painting With Two Or More Coats Of Epoxy Paint In Grey Colour On The Back Side Of Aluminium Sheet Including Appropriate Priming Coat. The Rate Includes The Cost Of Rounding Off The Corners, Lowering Down The Structural Frame Work From The Gantry, Fixing And Erecting The Same In Position All Complete As Per Drawings, Specification And Direction Of The Engineerincharge.( Structural Frame Work Including M.S. Plate To Be Provided Separately. Rectangular Area Of The Sheet Only Shall Be Measured For Payment). Overhead Informatory Road Signage Dsr 16.60.1 8.64 Sqm. 4409.78 4233.39 36576.45 64 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Dsr 8.2.2.2 34.45 Sqm 3852.10 3698.01 127396.50 65 Making Plinth Protection 50 Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75 Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. Dsr-4.17 6.00 Sqm 561.96 539.48 3236.87 66 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50 Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge.80 Mm Thick C.C. Paver Block Of M-35 Grade With Approved Colour Design And Pattern Dsr-16.91.2 207.07 Sqm 818.60 785.85 162723.31 1 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fitting And Fixtures Completed Including Cutting And Making Good The Walls And Floors Wherever Required.White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests 17.1.1 2.00 Nos. 5075.38 4872.36 9744.73 2 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Isi Marked White Solid Plastic Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete Including Cutting And Making Good The Walls And Floors Wherever Required. W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 17.2.1 3.00 Nos. 4886.50 4691.04 14073.11 3 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require A) White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap. 17.7.4 4.00 Nos. 1409.35 1352.98 5411.91 4 Providing And Fixing White Vitreous China Flat Back Or Wall Corner Type Lipped Front Urinal Basin Of 430X260X350 Mm And 340X410X265 Mm Sizes Respectively With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.I Clamps Complete, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required A) One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern 17.4.1 3.00 Nos. 4918.90 4722.14 14166.42 5 Providing And Fixing Flexible P.V.C. Waste Pipe For Sink Or Wash Basin Including Pvc Waste Fittings Complete. Flexible Pipe 17.28.2 A) 32Mm Dia 17.28.2.1 4.00 Nos. 89.66 86.07 344.29 B) 40Mm Dia 17.28.2.2 2.00 Nos. 89.66 86.07 172.15 6 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 17.31 4.00 No. 1205.92 1157.69 4630.74 7 Providing And Fixing Cp Brass Single Lever Lelephonic Wall Mixture Of Quality & Make And As Per Thedirection Of Enginer-Incharge. A) 15Mm Dia Nominal Dia. 17.22B 2.00 Each 5205.39 4997.17 9994.34 8 Providing And Fixing 8 Mm Dia C.P./S.S. Jet With Flexible Tube Upto 1 Meter Long With S.S. Triangular Plate For Eureopean Type W.C. Of Quality And Make As Approved By Engineer-In-Charge. 15Mm Nominal Bore 17.16A 2.00 Each 261.85 251.38 502.76 Sanitary Fixtures & Accessories : I 9 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms. Dsr-17.73.2 1.00 Each 531.69 510.43 510.43 10 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm, Height Of 75Mm With Concealed Fitting Arrangements, Weighing Not Less Than 106 Gms. Dsr-18.65 1.00 Each 83.58 80.24 80.24 11 Providing And Fixing C.P. Brass Ablution Health Faucet Assembly With 1.0 M Long Braided Pvc Hose With Mounting Bracket Fixed On Wall Complete.[For Ewc]-Make-Jaquar Ald565 Mr 2.00 Each 1705.00 1636.80 3273.60 12 Providing And Fixing C.P. Brass Two-Way Angle Valve For Ewc Points & For Fixing Ablution Health Faucet Of Approved Quality Conforming To Is:8931. 15 Mm Nominal Bore-Essco Sqt 526A Mr 2.00 Each 1335.00 1281.60 2563.20 1 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A Including Jointing With Seal Ring Conforming To Is : 5382 Leaving 10 Mm Gap For Thermal Expansion . (I) Single Socketed Pipes. A) 110Mm Diameter 12.41.2 31.30 Mtr 283.04 271.72 8504.80 2 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over Pvc Sheet 1M X 1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement,Punning,Rounding The Edges And Making And Finishing The Outlet Complete. A) 110Mm 12.22 7.00 Nos. 223.68 214.73 1503.13 3 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised - Pvc Rain Water Pipes By Means Of 50X50X50Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. A) 110Mm 12.43.2 20.00 Nos. 278.47 267.33 5346.54 4 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I)Single Socketed Pipes. 110 Mm Diameter 12.41.2 Rm. 283.04 271.72 5 Providing And Fixing To The Inlet Mouth Of Rain Water Pipe Cast Iron Grating 15 Cm Diameter And Weighing Not Less Than 440 Grams. Dsr-12.44 8.00 Nos. 41.02 39.38 315.06 6 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Nsr 20.00 Rm. 485.00 465.60 9312.00 B) 90Mm Dia P.V.C. Pipe Nsr 25.00 Rm. 390.00 374.40 9360.00 6 Providing & Fixing Upvc Floor Trap Of Self Cleansing Design With Cp Jali Complete In All Respects. (Make : Supreme / Finolex / Prince) P-Trap Type Floor Trap 110 X 90 Mm Nsr 12.00 No. 195.00 187.20 2246.40 7 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings/Accessories For Unplasticised Rigid Pvc Pipes Including Jointing With Seal Ring Leaving 10 Mm Gap For Thermal Expansion.. (Make : Supreme / Finolex / Prince) Door Tee 110X110X110 Mm Nsr 2.00 No. 280.00 268.80 537.60 110X110X90 Mm Nsr 2.00 No. 200.00 192.00 384.00 Bend 110 Mm Nsr 2.00 No. 170.00 163.20 326.40 Soil Waste & Vent Pipes And Fittings - Ii 90 Mm Nsr 2.00 No. 160.00 153.60 307.20 1 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge.Lls Etc. (Internal Work) I) Exposed On Wall A) 32Mm Nominal Dia Pipe 18.9.4 30.00 Rm. 328.94 315.78 9473.44 3 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings Including Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Outer Dia Pipes 18.7.3 20.00 Rm. 301.15 289.11 5782.13 4 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testiang Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work Including Cutting Chases And Making Good The Walls Etc. A) 15Mm Dia Nominal Outer Dia Pipes 18.8.1 70.00 Rm. 373.34 358.40 25088.28 B) 20Mm Dia Nominal Outer Dia Pipes 18.8.2 20.00 Rm. 403.19 387.06 7741.18 C) 25Mm Dia Nominal Outer Dia Pipes 18.8.3 Rm. 470.42 451.60 5 Providing & Fixing G.I. Pipes Complete With G.I. Fittings & Clamps Including Cutting & Making Good The Walls Etc. (Internal Work) I) Exposed On Wall A) 25Mm Dia Nominal Bore (Medium Duty) Dsr-18.10.3 20.00 Rm. 413.76 397.21 7944.21 Ii) Concealed Pipe Including Painting With Anticorrosive Bitumatic Paint, Cutting Chases And Making Good The Wall. A) 15Mm Dia Nominal Bore Dsr-18.11.1 15.00 Rm. 435.32 417.91 6268.65 2 Painting G.I. Pipes And Fittings With Synthetic Enamel White Paint Over A Ready Mixed Priming Coat, Both Of Approved Quality For New Work. A) 15Mm Dia Nominal Bore. Dsr-18.38.1 15.00 Rm. 14.55 13.97 209.51 B) 25Mm Dia Nominal Bore. Dsr-18.38.3 10.00 Rm. 22.69 21.78 217.79 2 Providing And Fixing 45 Cm Long Unplasticised Pvc Connection Pipe With Brass Unions. A) 15Mm Nominal Bore Dsr18.21.2.1 4.00 Nos. 73.31 70.38 281.51 5 Providing & Fixing Cp Brass Bib Cock Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.49.1 7.00 Nos. 380.09 364.88 2554.19 6 Providing & Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. A) 15Mm Nominal Bore 18.51.1 7.00 Nos. 599.19 575.22 4026.57 7 Providing & Fixing C.P. Brass Angle Valve For Basin Mixer And Gyser Points Of Approved Quality Conforming To Is 8931 A) 15Mm Nominal Bore 18.53.1 14.00 Nos. 430.71 413.48 5788.75 8 Providing And Fixing Gun Metal Gate Valve With Wheel Of Approved Quality. A) 25Mm Dia Nominal Bore 18.17.1 2.00 Each 466.78 448.11 896.23 B) 32Mm Dia Nominal Bore 18.17.2 1.00 Each 517.18 496.50 496.50 C) 50Mm Dia Nominal Bore 18.17.4 Each 769.96 739.16 Water Supply Pipes And Fittings - Iii 9 Providing And Fixing Ball Valve (Brass) Of Approved Quality, High Or Low Pressure, With Plastic Floats Complete 20Mm Dia Nominal Bore 18.18.2 1.00 Each 346.86 332.99 332.99 A) 25 Mm Nominal Bore 18.18.3 2.00 Nos. 348.03 334.10 668.21 10 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. 18.48 A) Circular Tank 18.48 2500.00 Ltrs 8.25 7.92 19799.33 11 Providing And Fixing Stone Slab Table Rubbed, Edges Rounded And Polished Of Size 75X50Cm Deep And 1.8Cm Thick Fixed In Urinal Partitions By Cutting A Chase Of Appropriate Width With Chase Cutter And Embedding The Stone In The Chase With Epoxy Grout Or With Cement Concrete 1:2:4 (1Cement: 2Coarse Sand: 4Graded Stone Aggregate 6Mm Nominal Size) As Per Direction Of Engineerin-Charge And Finished Smooth. 8.10 Granite Stone Of Approved Shade Dsr-8.10.2 1.08 Sqm. 3038.79 2917.23 3150.61 1 Providing & Fixing Soil, Waste And Vent Pipes. A) 100Mm Dia Centrifugally Cast Iron S & S Pipe. Dsr17.35.1.2 6.00 Rm. 885.53 850.11 5100.67 2 Providing Lead Caulked Joints To Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes & Fitting Of Diameters. A) 100Mm Dsr-17.58.1 2.00 Each 466.86 448.18 896.37 3 Providing & Fixing M.S. Holder Bat Clamps Of Approved Design To Sand Cast Iron/Centrifugally Cast (Spun) Iron S & S Pipe Embeded In & Including Cement Concrete Blocks 10X10X10Cm. Of 1:2:4 Mix (1 Cement : 2 Coarse : 4 Graded Stone Aggregate 20Mm Nominal Size). Including Cost Of Cutting Holes & Making Good The Walls Etc. A) For 100Mm Dia Pipe. Dsr-17.37.1 2.00 Each 272.13 261.24 522.49 4 Providing & Fixing Cast Iron Trap Of Self Cleansing Design With Or Without Ventarm Complete, Including Cost Of Cutting & Making Good The Walls & Floors. A) 100Mm Inlet & 75Mm Outlet. Dsr17.60.2.1 1.00 No. 1481.31 1422.06 1422.06 5 Providing & Fixing Cast Iron Coller. A) 100Mm Dia. Dsr17.57.1.2 2.00 No. 384.85 369.46 738.91 6 Providing And Fixing Plain Cast Iron S & S Sanitary Bend. A) 100Mm Dsr17.39.1.2 2.00 Nos. 427.52 410.42 820.84 1 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. A) 110Mm Dia P.V.C. Pipe Mr 7.50 M 485.00 465.60 3492.00 2 Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber With F.P.S. Bricks Of Class Designation 75 And Water Tight C.I. Cover With Frame Of 300 X 300Mm. Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design. A) 150 X 100 Mm. Size P Type With Sewer Bricks Conforming To Is : 4885 Dsr-19.4.2.1 1.00 Nos 2050.58 1968.56 1968.56 Soil Waste & Vent Pipes And Fittings - Ii Schedule Of Quantities For Internal Sewerage System - Iv 3 Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) Rcc Top Slab With 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement :4 Coarse Sand :8 Graded Stone Aggregate 40Mm Nominal Size) Inside Plastering 12Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With Floating Coat Fo Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20Mm Nminal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design 19.7 Inside Size 90X80Cms And 45Cms Deep Including Ci Cover With Frame (Light Duty) 455X610Mm Internal Diamensions Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15Kg). 19.7.1 With Fps Bricks Of Class Designation 150 Dsr-19.7.1.1 1.00 Each 9577.59 9194.49 9194.49 External Sewerage Works 1 Excavating Trenches In All Kind Of Soil Of Required Width For Pipes. Including Excavation For Sockets And Dressing Of Sides, Ramming Of Bottoms, Including Getting Out The Excavated Soil & Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth Including Consolidating Each Deposited Layer By Ramming, Watering, Etc & Disposing Of Surplus Excavated Soil As Directed Within A Lead Of 50M. Up To 1.50 M Depth Pipes 80 Mm To 300 Mm Diameter 2.10.1.2 20.00 Rm 264.10 253.54 5070.79 2 Providing And Fixing In Floor And Wall Face Ringfit Upvc Astral Ultradrain Conventional System For Soil And Waste Water Pipes Conforming To (Hsn Code: 3917) Type B Including Jointing With Seal Ring. (I) Double Socketed Pipes. 160Mm Dia Under Floor (For External Sewer) Nsr 20.00 Metre 1190.00 1142.40 22848.00 3 Constructing Brick Masonry Manhole With F.P.S. Bricks In Cement Mortar 1 : 4 (1 Cement : 4 Coarse Sand) Rcc Top Slab With 1 : 2 : 4 Mix (1 Cement : 2 Coarse Sand : 4 Grade Stone Aggregate 20Mm Nominal Size); Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1Cement 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1Cement : 2 Coarse Sand: 4 Graded Stone Aggregate 20 Mm Nominal Size) Finishd With A Floating Coat Of Neat Cement Complete As Per Standard Design Inside Size 90 X 80 Cm & 45 Cm Deep Including Ci Cover With Frame (Light Duty) 455 X 610 Mm Internal Dimension Total Wt. Of Cover & Frame To Be Not Less Than 38 Kg (Wt. Of Cover 23 Kg And Wt. Of Frame 15 Kg) 19.7.1.1 3.00 Nos 9577.59 9194.49 27583.46 4 Extra For Depth For Manhole With F.P.S. Bricks Size 90 X 80 Cm 19.8.1.1 0.30 Rm 6618.83 6354.07 1906.22 5 Providing M.S. Foot Rests Including Fixing In Manholes With 20*20*10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design : With 20 X 20 Mm Square Bar 19.15.1 3.00 Nos 408.51 392.17 1176.51 6 Providing And Fixing Square Mouth S.W. Gully Trap Grade `A Complete With C.I. Grating Brick Masonry Chamber With F.P.S Bricks And Water Tight Ci Cover With Frame Of 300 X 300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design 180 X 150 Mm. Size P Type 19.4.3.1 2.00 Nos 2101.54 2017.48 4034.96 7 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 19.32.1 1.00 Nos 20145.75 19339.92 19339.92 8 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr-19.15.1 8.00 Nos. 408.51 392.17 3137.37 9 Providing And Fixing S.C.I. Tee 150 Mm At The Inlet And Outlet Of Septic Tank. Dsr-7087 2.00 Nos. 621.00 596.16 1192.32 10 Providing And Fixing Soil, Waste And Vent Pipes:75 Mm Diameter Sand Cast Iron S&S Pipe As Per Is: 1729 Dsr17.35.2.1 3.00 Rmt. 783.54 752.19 2256.58 11 Providing & Fixing Of 75Mm Dia Sand Cast Iron S&S As Per Is - 1729 Terminal Guard. Dsr17.56.2.1 2.00 Nos. 255.52 245.30 490.59 12 Providing & Fixing 75Mm Plane Sand Cast Iron S&S Bend Of Required Drgtee. Dsr17.39.2.1 2.00 Nos. 282.18 270.89 541.78 13 Providing Lead Caulked Joints To Sand Cast Iron/ Cetrifugally Cast (Squn) Irons Pipes & Fitting Of 50 Mm Dia Dsr-17.58.2 2.00 Nos. 394.67 378.89 757.77 14 Providing And Fixing In Position Precast Rcc Manhole Cover And Frame Of Required Shape And Approved Quality.M.D. -10- Circular Shape 500Mm Internal Diameter Dsr19.19.2.2 2.00 Nos. 879.42 844.24 1688.49 1 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.10.3 51.00 Each 1115.37 1070.76 54608.68 2 Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls/Hffr Pvc Insulated Copper Conductor Single Core Cable Etc. As Required Dsr 1.11 4.00 Each 1187.60 1140.10 4560.39 3 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. Dsr 1.21.1 17.00 Metre 97.32 93.43 1588.26 4 Wiring For Circuit/ Submain Wiring Along With Earth Wire With The Following Sizes Of Frls/Hffr Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required.2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire Dsr 1.14.1 650.00 Metre 177.15 170.07 110542.86 5 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire Dsr 1.14.2 188.00 Metre 285.12 273.71 51457.72 6 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 4 Sq. Mm + 1 X 4 Sq. Mm Earth Wire Dsr 1.14.3 202.00 Metre 253.94 243.79 49244.67 7 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Dsr 1.14.4 105.00 Metre 333.78 320.42 33644.59 8 Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 5/6 & 15/16 A Modular Socket Outlet And 15/16 A Modular Switch, Connections Etc. As Required Dsr 1.32 22.00 Each 445.54 427.72 9409.83 9 Supplying And Fixing Brass Batten/ Angle Holder Including Connection Etc. As Required Dsr 1.34 15.00 Each 99.60 95.62 1434.25 Electrical Works 10 Installation ,Testing, Commissioning Of Wall Bracket /Ceiling Fittings Of All Sizes And Shapes Containing Upto Two Ls/Cfl/Led Lamps Per Fitting, Complete With All Accessories Including Connections Etc. As Required. Dsr 1.35 1.00 Each 90.48 86.86 86.86 11 Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Lighter (Round/ Square/ Rectangular) Smd Type Of Following Body Material With Pmma And Prismatic Diffuser And Construction As Per Is : 10322 With Driver As Per The Requirement With Driver Efficiency >85%, Operating Voltage Ac 140-270 Volt, Frequency 50/60 Hz, Operating Temp Range -50C To 400C, Internal Surge Protection Of 2.5 Kv With Short & Open Circuit Protection ,Thd < 10% , P. F.≥0.95, Ip20, Cri >80, Ugr (Unified Glare Rating) < 19, Flicker Free (Flicker Should Be Below 5%), Life Time (Led, Driver & Electrical Circuitry), Of Minimum 50000 Burning Hours With 70% Of Initial Lumen Maintained Till Life Ends, Cct 3000°K /4000°K / 5700°K / 6500°K (As Per Ansi Bin), Sdcm (Standard Deviation Colour Matching) <3, Maximum Power Consumption Should Not More Than The Specified Rating And Fixture Shall Be Confirming To Relevant Bis Standards. Manufactures Word Mark/ Name Engraved/ Embossing/ Screen Printing On Housing Complete In All Respect I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required With Minimum 5 Year Oem Warranty. System Lumen Efficacy ≥105 And <120 Lm/Watt Output . Lm79 & Lm80 Test Report And All Testing Required For Led Fixtures As Per Bis Shall Be Submitted. Shape Size And Cct Shall Be As Approved By Engineer-In-Charge As Per Requirement. (Thermal Management: Heat Sink Of Aluminium Housing Such That Led Junction Temperature Shall Not Rise Above 90°C) Powder Coated Die Cast /Extruded Aluminium Body Including Trim 18 Watt Mr 19.00 Each 700.00 672.00 12768.00 12 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required Dsr-5.4 3.00 Each 5681.03 5453.79 16361.37 13 Supplying And Laying 25 Mm X 5 Mm G.I Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 55.00 Metre 109.48 105.11 5780.78 14 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. A) Single Pole Dsr-2.10.1 9.00 Each 194.64 186.85 1681.68 15 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 6 Way (4 + 12), Double Door Dsr-2.3.1 2.00 Each 1677.24 1610.15 3220.30 16 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) A) 4 Way (4 + 12), Double Door Dsr-2.4.1 1.00 Each 3110.42 2986.01 2986.01 17 Supplying And Fixing 5 A To 32 A Rating, 240/415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Dsr-2.10.3 2.00 Each 498.76 478.81 957.62 16 Installation, Testing And Commissioning Of Ceiling Fan, Including Wiring The Down Rods Of Standard Length (Upto 30 Cm) With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required Dsr 1.45 10.00 Each 257.74 247.43 2474.35 17 Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 10.00 Each 280.55 269.33 2693.32 18 Installation Of Exhaust Fan In The Existing Opening, Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. Upto 450 Mm Sweep Dsr-1.50.1 7.00 Each 342.14 328.45 2299.17 19 Extra For Fixing The Louvers/ Shutters Complete With Frame For A Exhaust Fan Of All Sizes Dsr-1.51 7.00 Each 157.38 151.09 1057.62 20 Supply, Installation, Testing And Commissioning Of Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Metal( Aluminium Alloy) Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Steel/Al Body Power Factor Not Less Than 0.9, Service Value (Cm/M/W) Minimum As Below, 350 Rpm (Tolerance As Per Is : 374-2019), Thd (Total Harmonic Distortion) Less Than 10%, Suitable For Operation With Regulator For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 0C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Ceiling Fan Compliant To Is 374:2019 Fan I/C External Connections With 1.5 Sq.Mm Frls/Hffr, Pvc Insulated Copper Conductor Single Core Cable And Earthing Etc. As Required. 9.2.3 10.00 Each 2075.64 1992.62 19926.18 21 Supplying And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cable 1100 Volts Grade At The Depth Of 750 Mm Bellow Ground Level Over A Cushion Of 75 Mm Thick Sand All Around And Protected With Burnt Bricks On Side And On Top .On Surface The Cable Run Shall Be Fixed On Ms Clamps Etc.Of Suitable Size Or As Directed By The Engineer-Incharge ,Complete In All Respect.The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. Following Size 10 Sqmm X 2 Core Mr 164.00 Rm 410.34 393.93 64603.77 22 Supply & Fixing Of 225/230Mm Sweep Ventilating (Light Duty) Exhaust Fan Complete With Metallic Blade (Steel Bird Guard Protector /Copper Motor For High Air Suction Performance /Capacitor Etc.), Noise Level : (45 - 50) Db, Power Consumption : 45 W, Rated Voltage : 230 V, Rated Frequency : 50 Hz, Motor Type : Normal Speed. Complete In All Respect. Mr 7.00 Each 1665.00 1598.40 11188.80 23 Cost For Murals Work 32.40 Sqm 5850.00 5616.00 181958.40 24 Cost For Solar Street Light With 7M Pole Complete 15.00 Nos 22600.00 21696.00 325440.00 25 Cost For C.C. Bench 12.00 Nos 10000.00 9600.00 115200.00 26 Cost For Dustbin 6.00 Nos 4500.00 4320.00 25920.00 1. Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Levelling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or / And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure).. (Horti) 2.1 159.24 Cum 74.51 71.53 11389.98 2 Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 5 Km Lead Complete (Earth Measured In Stacks Will Be Reduced By 20% For Payment). (Horti) 2.2 79.62 Cum 491.88 472.21 37597.13 Horticulture 3 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Upto 5 Km Lead Complete (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 20 Mm (Horti) 2.4.1 106.16 Cum 242.46 232.76 24709.88 4 Spreading Of Sludge, Dump Manure And / Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And / Or Good Earth To Be Paid Separately). (Horti) 2.8 159.24 Cum 49.94 47.94 7634.64 5 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge (Horti) 2.9 159.24 Cum 34.87 33.47 5330.39 6 Grassing With Selection No.1 Grass Including Watering And Maintenance Of The Lawn For 30 Days Or More Till The Grass Forms A Thick Lawn, Free From Weeds And Fit For Mowing Including Supplying Good Earth, If Needed (The Good Earth Shall Be Paid For Separately). In Rows 5 Cm Apart In Both Directions. (Horti) 2.10.1 530.80 Sqm 16.89 16.21 8604.46 7 Providing And Displaying Of Aglaonema Silver Queen Having 30 Cm To 45 Cm. Ht. With 12 To 15 Leaves, Multi Suckers, Fresh And Healthy Leaves, Well Developed In 25 Cm Dia Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.8 60.00 Each 154.50 148.32 8899.22 (Horti) Dsr 3.8 8 Providing And Displaying Of Aglaonema Dove Variety Having Ht. 30 Cm To 45 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.4 75.00 Each 77.42 74.32 5574.03 (Horti) Dsr 3.4 9 Providing And Displaying Of Aglaonema Marentifolium Variety Having Ht. 23 Cm To 30 Cm With 8 To 10 Leaves, Well Developed, Fresh And Healthy With Colorful Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.10 50.00 Each 64.54 61.96 3097.83 (Horti) Dsr 3.10 10 Providing And Displaying Of Chamaedorea Elegans Palm Having Ht. 60 Cm To 75 Cm, Well Developed With Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.26 50.00 Each 102.70 98.59 4929.51 (Horti) Dsr 3.26 11 Providing And Displaying Of Croton Baby Golden Variety Having Ht.30 Cm And Above, Well Developed With Full Of Fresh And Healthy Leaves In 20 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.28 150.00 Each 39.11 37.55 5632.42 (Horti) Dsr 3.28 12 Providing And Displaying Of Croton Golden (Broad Leaves) Having Ht. 60 Cm To 75 Cm With 3 To 4 Branches, Well Developed, Fresh And Healthy Leaves In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.32 150.00 Each 53.81 51.65 7748.01 (Horti) Dsr 3.32 13 Providing And Displaying Of Dieffenbachia Tropic-Snow Having Ht. 60 Cm & Above With 8 - 10 Leaves, Well Developed, Fresh & Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot & As Per Direction Of The Officer-In-Charge. (Horti) 3.40 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.40 14 Providing And Displaying Of Dieffenbachia Mosaic Having Ht. 30Cm To 45 Cm With 10-12 Leaves, Well Developed, Fresh And Healthy In 25 Cm Size Of Earthen Pot/Plastic Pot. & As Per Direction Of The Officer-In-Charge. (Horti) 3.41 50.00 Each 75.32 72.31 3615.28 (Horti) Dsr 3.41 15 Providing And Displaying Dianthus In Different Colour Well Developed With Fresh & Healthy Foliage 30 Cm Ht., In Full Bloom With Stacking In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.29 50.00 Each 51.79 49.72 2486.05 (Horti) Dsr 4.29 16 Providing And Displaying Gazania Hybrid In Different Colour Well Developed With Fresh & Healthy Foliage With Full Bloom In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-Incharge. (Horti) 4.31 150.00 Each 61.63 59.16 8874.49 (Horti) Dsr 4.31 17 Providing And Displaying Gaillardia Double Hybrid Variety Well Developed 30 To 45 Cm Ht 20 To 30 Fresh & Healthy Flower With Green Painted Bamboo Stick In 25 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.75 120.00 Each 51.85 49.78 5973.11 (Horti) Dsr 4.75 18 Providing And Stacking Of Plant Mogra Of Height 25 To 30 Cm., 2 To 3 Branch In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.88 100.00 Each 44.03 42.27 4226.60 (Horti) Dsr 4.88 19 Providing And Stacking Of Plant Canna Dwarf Of Height 25 To 30 Cm., 2 To 3 Suckers In Earthen Pots Of Size 20 Cm Earthen Pot/Plastic Pot And As Per Direction Of The Officer-In-Charge. (Horti) 4.89 100.00 Each 34.25 32.88 3287.87 (Horti) Dsr 4.89 20 Bush Rose In Different Colour 2 To 3 Healthy Branch 30 Cm And Above Ht. Well Developed With 8 Or More Flowers / Flower Buds In 20 Cm Earthen Pot /Plastic Pot As Per Direction Of The Officer-Incharge. (Horti) 4.90 100.00 Each 24.47 23.49 2349.13 (Horti) Dsr 4.90 21 Providing And Displaying Budded Rose (H.T. Variety) 3 To 4 Healthy Branch 30 Cm And Above Ht. Well Developed With One And Above Flower Plant In 20 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.91 100.00 Each 31.29 30.04 3003.96 (Horti) Dsr 4.91 22 Providing And Displaying Standard Rose (H.T. Variety) 3 To 4 Healthy Branch 90 Cm And Above Ht. Well Developed With One And Above Flowers In 25 Cm Earthen Pot, As Per Direction Of The Officer-In-Charge. (Horti) 4.93 75.00 Each 143.77 138.02 10351.28 (Horti) Dsr 4.93 23 Providing And Stacking Of Plumeria Rubra Of Height 120-150 Cm. With 3-4 Branches And Thick Stem In Big Size Hdpe Bags As Per Direction Of The Officer-In-Charge. (Horti) 7.72 75.00 Each 381.60 366.34 27475.20 (Horti) Dsr 7.72 24 Providing And Stacking Of Polyalthia Longifolia (Ashok) Of Height 180-195 Cm. In Gunny Bag Of Size 30 Cm As Per Direction Of The Officer-Incharge. (Horti) 7.75 75.00 Each 95.40 91.58 6868.80 (Horti) Dsr 7.75 25 Providing And Stacking Of Saraca Indica (Sita Ashok) Of Height 105-120 Cm. In Big Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge. (Horti) 7.80 75.00 Each 76.32 73.27 5495.04 (Horti) Dsr 7.80 26 Providing And Stacking Of Terminalia Arjuna Of Height 150-165 Cm. In Big Polybags Of Size 25 Cm As Per Direction Of The Officerin-Charge. (Horti) 7.88 75.00 Each 57.24 54.95 4121.28 (Horti) Dsr 7.88 27 Providing And Stacking Of Calliandra, Emarginata Of Height 45-60 Cm. In Earthen Pot Of Size 20 Cm As Per Direction Of The Officer-Incharge. (Horti) 8.5 150.00 Each 33.39 32.05 4808.16 (Horti) Dsr 8.5 28 Providing And Stacking Of Nerium Oleander (Kaner) Of Height 60- 75 Cm. With 5-6 Branches In Poly Bags Of Size 25 Cm As Per Direction Of The Officer-In-Charge.
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
Contract Date: Ref. Documents Contract Value : 1.77 Crore
Statutory Bodies & Commissions/Committees No of Bidders 7
West Bengal View Result →
17.
Public Administrative Department #11311364 Technical Bid
Tender for Rate For Construction Items/Materials Of Labpur Development Blocks Jurisdiction Of Fy-2026-27 (Including All Taxes). , Laying And Jointing Pvc Pipe. Heading , Welding By Electric Plant , Hire Charges For 5 Hp With Operator,Fuel And Shifting Etc All Charges Complete , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) With Prop Including All Fittings , Hire Charges Of Shuttering Plank (25Mm-30Mm Thick) Without Prop Including All Fittings , Hire Charges Of Shuttering Plank (Above 30Mm-37Mm Thick) With Prop Including All Fittings , Hire Charges Of 5 Kva Generator , Hire Charges Of 3 Kva Generator , Hire Charges Of Concrete Mixer 0.25 To 0.40 Cum With Hopper , Hire Charges Of Diesel Road Roller- 8 To 10 Tonne , Vibrator (Needle Type 40 Mm) , Surface Vibrator , Water Tanker 5000 Ltr. Capacity , 1St Class Picked Jhama Bricks(Traditional) , 1St Class Traditional Bricks (Kiln Burnt) , Modular Fly Ash Bricks , Fly Ash Bricks(Traditional) , Coloured Inter Locking cement concrete Paver Block , Moorum , Fine Sand , Medium Sand , Coarse Sand , Coarse Sand , Portland Cement , White Cement , Water Proofing Materials , Brick Aggregate (Single Size):50 Mm Nominal Size , Brick Aggregate (Single Size):40 Mm Nominal Size , Stone Aggregate(Single Size):63 Mm Nominal Size , Stone Aggregate(Single Size): 40 Mm Nominal Size , Stone Aggregate(Single Size):20 Mm Nominal Size , Stone Aggregate(Single Size): 10 Mm Nominal Size , Stone Aggregate(Single Size): 06 Mm Nominal Size , Stone Screening Type A (13.2 Mm) , Stone Screening Type B (11.2Mm) , Stone Boulder( 225 Mm Above ) , Stone Boulder ( 225Mm-150Mm ) , Grade 1 Stone Metal 63 Mm To 45 Mm , Polythene Sheet (150 Gm Per Sqm) , Thermocol 12.5 Mm Thick. , Udaypur Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Floor, Lobby Etc) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Udaypur Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , Chawk Dungri Marble Slab ( For Wall/Dado) 18 Mm Thick Of Size 0.3 Sq M To 0.6 Sq M , 18 Mm Thick Marble Partition Slab For Urinals Including Fitting Fixing (With Chawk Doongri Marble) , Ceramic Glazed Tiles Ist Quality 300 X 300 Mm In All Shades And Designs Of White, Ivory, Grey, Fume Red Brown Etc. , Rectified - Ceramic Glazed Tiles Ist Quality 300 X 300 Mm Or More In All Shades Designs White, Ivory, Grey, Fume Red Brown Etc , Vitrified Floor Tile 60X60 Cm , Precast Chequered Cement Tiles 22 Mm Thick Dark Shade Using Ordinary Cement , Bitumen Vg-30 , Bitumen Emulsion , Coal Tar , Diesel Oil , Sal Silliguri -In/C Labour Cost , Sal Malaysia-In/C Labour Cost , Neem Wood -In/C Labour Cost , Other Local Wood -In/C Labour Cost , Ordinary Teak Wood -In/C Labour Cost , Sisu/Gamar Wood -In/C Labour Cost , Local Sal Wood -In/C Labour Cost , Bamboo (8Cm-10Cm Dia) Including Fixing , Eucalyptus Bullah (7.5Cm -10Cm Dia) , Eucalyptus Bullah (12.5Cm -15Cm Dia) , Eucalyptus Bullah (17.5Cm -20Cm Dia) , Sal Bullah (7.5Cm -10Cm Dia) , Sal Bullah (12.5Cm -15Cm Dia) , Sal Bullah (17.5Cm -20Cm Dia) , Malayasia Sal Cleat , Wood Dust , Frp Composite Door Frame 66Mm X 70Mm , Frp Composite Door Frame 66Mm X 90Mm , Supplying Solid Flush Type Doors Of Commercial Quality , 30 Mm Thick Factory Made Glass Fiber Reinforced Plastic Panel Door Shutter I/C Carriage , Supplying,Fitting & Fixing Of 2-Track / 3-Track Aluminium Sliding Window , Supplying, Fitting & Fixing Of Partly Glazed Partly Paneled Or Fully Glazed Single Leaf Aluminium Swing Door , Supplying, Fitting & Fixing Of Aluminium Fixed Partition Wall Of All Aluminium Sections , Anodised Aluminium Hanging Type Door Stopper , Brass 150 Mm Floor Door Stopper (0.357 Kg) , Chromium Plated Brass Mortice Latch And Lock 100X65 Mm With 6 Levers And A Pair Of Brass Lever Handles , Ms Integrated Grill For Steel Window And Ventillator , Two Point Nose Steel Handle , Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars. , Top Hung Side Hung Ventillator , Fixed Type Ventilators As Per I.S. Sizes With Horizontal Glazing Bars Height Being Limited To 580 Mm , Hydraulic Door Closer Tubular Type Aluminium Section Body , Oxidised M.S. Casement Stay(Straight Peg Type)300Mm Not Less Than 0.33 Kg , Mirror Of Superior Make Glass 60X45 Cm , Float Glass Sheet Of Nominal Thickness 4 Mm (Weight Not Less Than 10 Kg/Sqm) , Float Glass Sheet Of Nominla Thickness 5.5 Mm (Weight Not Less Than 13.50 Kg/ Sqm) , Float Glass Sheet Of Nominal Thickness 8 Mm (Weight Not Less Than 20.00 Kg/Sqm) , False Ceiling (With 4Mm Thick Pearl Designer Fibre Cement Board) , Supplying, Fitting & Fixing Asbestos Corrugated Sheet(6 Mm Thick) , Supplying, Fitting & Fixing Asbestos Ridging , Supplying, Fitting & Fixing Zn-Al Alloy Steel Sheet Work In Roof , Supplying, Fitting & Fixing Aluminium Sheet Ridging , Fitting And Fixing Glass Reinforced Polyester Translucent Fiber Glass Sheet , Fitting And Fixing Glass Reinforced Polyester Translucent Ridging , Fitting & Fixing Circular Corrugated Aluminium Sheet , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Upto 0.10 Sq.M. Area , Reinforced Cement Concrete Ventilator Of 20 Mm. Thick Above 0.10 Sq.M. Area , G I Wire , Seam Bolts And Nuts 6 Mm Dia And 25 Mm Long , Galvanised Steel Bolts & Nuts 6 Mm Dia And 25 Mm Long Round Head With Slots , Galvanised Steel J Or L Hooks 8 Mm Dia , G.I Limpet Washer , Bitumen Washer , Bright Finished Or Black Enamelled Mild Steel Screws 40 Mm , Bright Finished Or Black Enamelled Mild Steel Screws 20 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 50X37x 1.50 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 75X47x 1.70 Mm , Bright Finished Or Black Enameled Mild Steel Butt Hinges 100X58x 1.90 Mm , Fan Hook , Reinforced Cement Concrete Pipe 600 Mm Dia Np- 3 Spigot , Reinforced Cement Concrete Pipe 900 Mm Dia Np - 3 Spigot , Reinforced Cement Concrete Pipe 1000 Mm Dia Np -3 Spigot , Reinforced Cement Concrete Pipe 1200 Mm Dia Np - 3 Spigot , G.I. Pipes 15 Mm Dia , G.I. Pipes 20 Mm Dia , G.I. Pipes 25 Mm Dia , G.I. Pipes 32 Mm Dia , G.I. Pipes 40 Mm Dia , G.I Pipes 50 Mm Dia , G.I. Pipes 65 Mm Dia , G.I. Pipes 80 Mm Dia , Gi Pipe 32 Mm Dia Medium Quality For Underground Works , Gi Pipe 40 Mm Dia Medium Quality For Underground Works , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 15 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 20 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 25 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 32 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 40 Mm Outer Dia , Chlorinated Polyvinyl - Chloride (Cpvc) Pipe 50 Mm Outer Dia , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (15 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (20 Mm Dia) [For Concealed Work] , Cpvc (Chlorinated Polyvinyl Chloride) Pipes (25 Mm Dia) [For Concealed Work] , Upvc Pipes (Working Pressure 4 Kg /Cm2 ) Single Socketed Pipe 75 Mm Dia , Upvc Pipes (Working Pressure 4 Kg / Cm2 ) Single Socketed Pipe 110 Mm Dia , P.V.C. Connector 15 Mm Dia 600 Mm Long , Polythene Waste Fittings Complete 32Mm , Waste Pipe, With Pvc Coupling At One End Fitted With Necessary Clamps 900 Mm Long , 32 Mm Dia Polythene Flush Pipe , H.P. Or L.P. Ball Valve With Polythene Floats: 15 Mm Dia , H.P. Or L.P. Ball Valve With Polythene Floats: 20 Mm Dia , H.P. Or L.P. Ball Valve With Polythene Floats: 25 Mm Dia , 20 Mm Dia Gunmetal Gate Valve With Wheel , Check Valve 32Mm , Check Valve 40Mm , Check Valve 50Mm , Slotted Cowl (Terminal Guard) 75 Mm Dia , Slotted Cowl (Terminal Guard) 100 Mm Dia , Upvc Plain Y 75 Mm Dia , Upvc Plain Y 110 Mm Dia , Upvc Single Equal Tee (Without Door) 75X75x75 Mm , Upvc Single Equal Tee (Without Door) 110X110x110 Mm , Upvc Bend 87.50, 75 Mm Bend , Upvcbend 87.50, 110 Mm Bend , Upvc Pipe Clip 75 Mm Bend , Upvc Pipe Clip 110 Mm Bend , C.P.Brass Bibcock 15 Mm , C.P. Brass Long Body Bibcock 15 Mm , C.P. Brass Stop Cock (Concealed) 15 Mm , 15 Mm Ptmt Bib Cock , Ptmt Pillar Cock , Ptmt Push Cock 15 Mm Dia , Supplying, Fitting And Fixing Pillar Cock Of Approved Make Cp Pillar Cock - 15 Mm Equivalent To Code No. 507 & Model Tropical / Sumthing Special Of Essco Or Similar Brand. , 15 Mm Swan Neck Tap With Left & Right Hand Operating Nob With Aerator (Equivalent To Code No. 510, 510(A) And Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Stop Cock (Equivalent To Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special Of Essco Or Similar Brand). , Chromium Plated Angular Stop Cock With Wall Flange (Equivalent To Code No. 5053 & Model - Florentine Of Jaquar Or Similar Brand). , Polythene Bib Cock / Stop Cock (Hd) With Metal/Plastic Inlet (Emco / Atlas Or Equivalent) , C.P. Over Brass Waste Fittings 32 Mm , Sink 630 Mm X 550 Mm X 180 Mm With Waste Fittings And Two Coats Of Painting Of C.I. Brackets , Ptmt - Liquid Soap Container Of 400 Ml Capacity , Ptmt - Soap Dish/Holder 138X102x75 Mm , Towel Rail (Cp Over Brass )- 600 Mm , Shower Rose C.P Brass For 15 To 20 Mm Intel 100 Mm Dia , Shower Rose C.P.Brass For 15 To 20 Mm Intel 150 Mm Dia , Shower Jet , Corner Urinal , Ci P Trap , Ci S Trap , Porcelain P Trap , Porcelain S Trap , Coloured Pedestal Type W.C. Pan 580X440 Mm (European Type) S Trap , Coloured Orissa Pattern W.C. Pan 580X440 Mm , Vitreous China Flat Back Wash Basin 630X450 Mm , Vitreous China Foot Rests 250X125x25 Mm , Vitreous China Pedestal For Wash Basin , Flushing Cistern P.V.C. 10 Lts Capacity (Low Level) (White) (With Fittings, Accessories And Flush Pipe) , Circular Shape 450 Mm Dia Precast Reinforced Cement Concrete Manhole Cover With Frame L.D. -25 , Ci Manhole Cover 450 Mm Dia , C.I. Grating 100X100 Mm , Polyethylene Water Storage Tank With Cover And Suitable Locking Arrangemnet , Adhesive Solvent Cement , Unslaked Lime , Synthetic Enamel Paint, Having Voc ( Volatile Organic Compound Content Less Than 150 Gm/Liitre , Ready Mixed Pink Or Grey Primer On Wood Work(Hard And Softwood) Having Voc Content Less Than 50 Gms/Litre , Water Thinnable Cement Primer For Interior Wall Surface, Having Voc Content Less Than 50 Gms/Litre , Black Japan , Synthetic Enamel Paint In Black Or Chocolate Shade , Superior Copal Varnish , Green Or Blue Medium Shade Pigment , Acrylic Exterior Paint , Coal Tarring , Loading Unloading & Stacking Sand/ Stone Aggregate (Less Than 40Mm Nominal Size) , Loading Unloading & Stacking Stone Aggregate (Above 40Mm Nominal Size) , Loading Unloading & Stacking Lime, Moorum, Building Rubish And Similar Miscellaneous Material , Loading, Unloading And Stacking By Manual Means Of Steel , Loading, Unloading & Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced Cement Pipes) 600, 700, 750 & 800 Mm Dia , Loading, Unloading & Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced Cement Pipes) 900 Mm Dia , Loading, Unloading And Stacking By Manual Means (R.C.C. Pipes , C.I. Pipes And Unreinforced) Cement Pipes 1000, 1100 & 1200 Mm Dia , Tor Steel Rods/Hysd Bars/Tmt Bars (Sail/Tata/Rinl) (Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars(Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Tor Steel Rods/Hysd Bars/Tmt Bars (Other Than Sail/Tata/Rinl/Jsw/Jspl/Shyam/Srmb/Bmasl/Elecrosteel/Ssl)(Fe415/Fe500/Fe500d Conforms To Is: 1786) , Wire Mesh (Rabbit) , Sausage Wire Net , 1.5 Mm Thick Ms Sheet , Galvanised Steel Plain Sheets , Galvanised Steel Corrugated Sheets , Stainless Steel Bolts /Square Bar And Plates , Grill Weighing Above 10 Kg./Sq.Mtr And Up To 16 Kg./Sq. Mtr. , Structural Members Of Specified Sections Weighing Less Than -22.5 Kg./M (E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp (6)- 1964) , Structural Works In Roof Trusses Etc. Using Joists, Channels And Angles Of Specified Section (Conforming To Is: 226, Is: 808 & Sp (6)- 1964) Weighing Less Than 22.5 Kg/ M , M.S. Structural Works In Roof Trusses With Tubular Sections Conforming To Is: 806-1968 & Is: 1161- 1998 (Trusses Spanning Up To 12.00 M) , M.S. Structural With Hollow Sections (Square Or Rectangular Shape) Conforming To Is: 806-1968 & Is:1161-1998) Span Up To 12 Mtr , Collapsible Gate , Rolling Shutter Made Of 80X1.25 Mm Machine Rolled Laths , Precast Cement Concrete Blocks (Nominal Mix. 1:1.5:3 With 20 Mm Down Coarse Aggregate Including Supplying At Site, Laying And Finishing The Top Surface With 1:3 Cement Mortar) , Fencing Post 215 Cm 150 Mm X 150 Mm Section At Bottom, 100 Mm X 100 Mm Section At Top With T-Base 300 Mm X 150 Mm X 100 Mm, Having 4 Nos 6 Mm Dia Vertical M.S. Reinforcement And 6 Mm Dia Binders @ 200 Mm Centres, Finished Smooth , Cowdung , Empty Gunny Bag , Open Weave Jute Geo-Textile (Jgt) Having Overall Weight Of 500 Gm Per Sq. M Thickness 5 Mm, Width 1220 Mm, Tensile Strength 10 Kn/M X 7.50 Kn/M Including Lapping, Staples Or Nails, Testing , Woven Jute Geo-Textile (Jgt) 724 Gm/Sqm Possessing Tensile Strength Of 25 Kn/M Including Lapping, Staples Or Nails, Testing , Geotextile 120 Gram Per Sqm Membrane
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 4
West Bengal View Result →
18.
Public Administrative Department #11306281 AOC
Tender For Various development Works At Swami Ramdev Maharaj Sports Complex.-ITEM NO: 1 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR Item No: 46.19) (PMC Bhavan) Unique No (16026) Rate List Year (2024-2025) ITEM NO: 2 Removing lime or lean cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. (SSR Item No: 46.12) (PMC Bhavan) Unique No (16019) Rate List Year (2024-2025) ITEM NO: 3 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No. 21.02) (PMC Bhavan) Unique No (15202) Rate List Year (2024-2025) ITEM NO:4 Transportation of material obtained from excavation including soil, Cu.M rubble, bricks, RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. As directed by Engineer In charge (SSR Item No: 78.36) (PMC Bhavan) Unique No (17223) Rate List Year (2024-2025) ITEM NO: 5 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (SSR Item No: 21.38) (PMC Bhavan) Unique No (15233) Rate List Year (2024-2025) ITEM NO: 6 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR Item No: 21.37) (PMC Bhavan) Unique No (15232) Rate List Year (2024-2025) ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.10) (PMC Bhavan) Unique No (15312) Rate List Year (2024-2025) ITEM NO: 8 Supply of Titanium FIFA Certified Soccer Turf EB-50 MM Series Grass:- Material /Dtex: PE12000 Structure Monofilament Yarn Pile Height (mm): 50 10cm): 15 Stitch rate (Per 10 cm):15 Guage (inch): 5/8 Stitches/m2:9450 Roll (Mtr) Width x Length: 4 or 2 x 30,5 Breaking: Triple Layers High wear resistance & perfect ball roll properties Economical System & UV Resistance Creative Technology & Quick Construction Natural & Beautiful appearance Good performance Reinforced Playability 3 years Turf Warranty 1 year Glue Warranty SBR Black Rubber Granuels in size of 8mm to 2.4mm 10kg/m2 Silica Sand 18kg/m2 Silica Sand 18kg/m2 Tape & European PU glue with hardner (Ration 2:1) According to Layout Colour-Green Plan Installation Installation of Turf with inhouse trained installation team Infill of Silica Sand & Granules Brushing & Line Marking. Including Transportation (SSR Item No: 72.4) (PMC Bhavan) Unique No (17099) Rate List Year (2024-2025) ITEM NO: 9 Cricket Pitch Turf Providing & Fixing Full Pitch Synthetic Turf 15 mm thk. of size 30 M X 2.75 M. over Tremix surface (Excluding Tremix) with suitable arrangement/adhesive as per manufacturers specification rolling with hand roller for removing air gaps as directed by Engineer In charge etc. complete. (SSR Item No: 72.1) (PMC Bhavan) Unique No (17096) Rate List Year (2024-2025) ITEM NO: 10 Providing & Fixing nylon net 35mmx35mmx1.75mm including top and side. (SSR Item No. 72.2) (PMC Bhavan) Unique No (17097) Rate List Year (2024-2025) ITEM NO: 11 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. (SSR Item No: 42.52) (PMC Bhavan) Unique No (15904) Rate List Year (2024-2025) ITEM NO: 12 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted/welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No: 23.01) (PMC Bhavan) Unique No (15297) Rate List Year (2024-2025) ITEM NO: 13 Providing structural steel work in hollow section of various thickness and sizes in square, rectanular and round shape from 25mm to 450mm section as per IS 4923 YST 310 Grade produced from iron ore and blast furnace route etc. as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/bolted/ welded connections and painting complete. (SSR Item No: 23.12) (PMC Bhavan) Unique No (15307) Rate List Year (2024-2025) ITEM NO: 14 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters (SSR Item No: 42.53) (PMC Bhavan) Unique No (15905) Rate List Year (2024-2025) ITEM NO 15 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coal on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fiuting in the five pan at nominal 180-250 mm center to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND (R) steel quality super durable polyester paint (SSR Item No: 38.34) (PMC Bhavan) Unique No (15655) Rate List Year (2024-2025) ITEM NO: 16 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints. raking out joints, watering and scaffolding etc. Complete (SSR Item No. 27.13) (PMC Bhavan) Unique No (15381) Rate List Year (2024-2025) ITEM NO: 17 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (15444) Rate List Year (2024-2025) ITEM NO: 18 Providing and fixing mild steel grill gate with angle iron frame 65mm x 65mm x 10mm with iron bars at 150mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt. (SSR Item No: 44.10) (PMC Bhavan) Unique No (15994) Rate List Year (2024-2025)
Contract Date: Jun 19, 2026 Contract Value : 33.26 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
19.
Public Administrative Department #11306280 AOC
To carry out various remaining development works at Vitthal Tupe Sports Complex Hadapsar=-ITEM NO : 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means ( SSR Item No : 21.02 ) (PMC Bhavan ) Unique No (15202) Rate List Year (2024-2025) ITEM NO : 2 Transportation of material obtained from excavation including soil, rubble,bricks,RCC concrete, kerb stones, steel railing, iron pipes, channels etc. Obtained from excavation, dismantling, loading in a Truck of minimum 5 Cu M capacity or designed capacity and transporting within the municipal limits or any designated place, unloading, stacking or spreading of material etc. complete. ( SSR Item No : 2.39 ) (PMC ROAD ) Unique No (114) Rate List Year (2023-2024) ITEM NO : 3 Supplying hard murum/ kankar at the road site, including conveying and stacking complete. ( SSR Item No : 2.29a ) (PMC ROAD ) Unique No (103) Rate List Year (2023-2024) ITEM NO : 4 Spreading hard murum/ soft murrum/ gravel or kankar for side width complete ( SSR Item No : 2.30 ) (PMC ROAD ) Unique No (105) Rate List Year (2023-2024) ITEM NO : 5 Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. ( SSR Item No : 2.31 ) (PMC ROAD ) Unique No (106) Rate List Year (2023-2024) ITEM NO : 6 Providing and constructing Brick Masonry Inspection Chamber 90cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W.pipes, Brick Masonry, plastering from inside and C.I. lid cover of 75Kilogramwith lid and frame fixed in cement concrete. ( SSR Item No : 42.11 ) (PMC Bhavan ) Unique No (15863) Rate List Year (2024-2025) ITEM NO : 7 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with R.C.C. Cover medium duty 140Kilogramwith frame etc complete. ( SSR Item No : 42.12 ) (PMC Bhavan ) Unique No (15864) Rate List Year (2024-2025) ITEM NO : 8 Providing ISI standard R.C.C. pipes in standard lengths of following class and diameter suitable for either collar joints or rubber ring joints, excluding GST lev-ied by GOI & GOM in all respect including inspec- tion charges, transport to departmental stores, unloading and stacking etc. complete as per IS-458/1988. N o t e : O n l y 8 5% r a t e i s p a y a b l e t i l l satisfactory hydraulic testing is given. The Bidder shall procure RCC pipes and chamber covers from following suppliers 1) M/S Sneh Precast 2) M/S Kalokhe pipes and precast industries 3) M/S Poona Concrete Company If bidder wish to supply RCC pipes and chamber covers other than above suppliers, then it is mandatory to take approval of supplier from concern department. Third party inspection of RCC pipes and chamber covers is mandatory and should be witnessed by EIL/IR CLASS/SGS. The cost of third party inspection should be borne by contractor. Class ‘NP-II 300 mm ( SSR Item No : 50.a vii ) (PMC Drainage ) Unique No (19058) Rate List Year (2024-2025) ITEM NO : 9 Providing and constructing on sewer line, B. B. masonry circular m a n h o l e w i t h c o n c e n t r i c cone 1.2 M dia. at bottom and 0.5 M dia. at top and upto a depth of 1.50 M with 23 cm. thick and 35cm thick brickwork for balanced depth in 230 X 100 X 75 mm brick masonry in CM 1:5 proportion plastering both inside and outside in CM 1:3 with cement finish, half round RCC pipe of required dia excluding excavation including PCC1:3:6 in bed 100 mm thick , haunches and channels in 1:2:4 proportion concrete, finishing channels in smooth rendering, providing 100 mm thick 1:2:4 coping on the top of the masonry & below frame including providing and fixing approved make and quality S.F.R.C. frame and cover of 56 cm dia. heavy duty 275 kg. etc. complete as directed by Engineerincharge. Note : The rate of this item isinclusive of hydraulic testing of chamber. Providing and constructing on sewer, B. B. masonry circular manhole with concentric cone (as per attached drawing no.1) ( SSR Item No : 56 ) (PMC Drainage ) Unique No (19206) Rate List Year (2024-2025) ITEM NO : 10 Providing & Applying External Textured Paint + Applying Waterproofing Coat as per below steps 1) Cleaning + crack filling 2) 1coat of Waterproofing Chemical 3) 1 Coat Apex Duracast CrossTex (2mm Thk) 4) 2 Coat of Professional Premium Exterior Emulsion Apex including claning and preparing the existing surface and scaffolding if necessary ( SSR Item No : 63.13 ) (PMC Bhavan ) Unique No (16702) Rate List Year (2024-2025) ITEM NO : 11 Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. ( SSR Item No : 32.34 ) (PMC Bhavan ) Unique No (15466) Rate List Year (2024-2025) ITEM NO : 12 Water bound distemper : Providing and applying water bound distemper along with primer coats including scaffolding if necessary, cleaning and preparing the surface etc. complete Recommended companies: Asian, neroleck, Dulex ( SSR Item No : 63.1 ) (PMC Bhavan ) Unique No (16691) Rate List Year (2024-2025) ITEM NO : 13 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. ( SSR Item No : 46.42 ) (PMC Bhavan ) Unique No (1547) Rate List Year (2023-2024) ITEM NO : 14 House keeping : Cleaning Of Passage by wet and dry method including swipping, water, phenol, room freshener, acid and chemical cleaning, scrubber machine, Colin for glass cleaning, material and labour, etc. complete. ( including all windows, doors, tables etc. present in passage for one time cleaning) ( SSR Item No : 78.19 ) (PMC Bhavan ) Unique No (17191) Rate List Year (2024-2025) ITEM NO : 15 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plaster surface including scaffolding, preparing the surface, applying the acrylic wall putti etc. complete. ( SSR Item No : 35.23 ) (PMC Bhavan ) Unique No (15573) Rate List Year (2024-2025) ITEM NO : 16 Building (Bd-V : Water supply and sanitory fittings)Upvc sanitary pipes all 20 mm dia ( SSR Item No : 49.V-346 ) (PMC Bhavan ) Unique No (2314) Rate List Year (2023-2024) ITEM NO : 17 Flat back urinal-providing and fixing flat back urinal without flushing tank but including bracket for fixing urinals,inlet pipe,32mm dia pvc flush pipe and stop tap ,filling the gaps with white cement etc complete ( SSR Item No : 61.04 ) (PMC Bhavan ) Unique No (16484) Rate List Year (2024-2025) ITEM NO : 18 Building (Bd-V : Water supply and sanitory fittings)Gun Metal stop tap with crutch wheel 20mm ( SSR Item No : 49.V-31 ) (PMC Bhavan ) Unique No (17702) Rate List Year (2024-2025) ITEM NO : 19 Building (Bd-V : Water supply and sanitory fittings)Shower rose chromium plated brass 10cm ( SSR Item No : 49.V-177 ) (PMC Bhavan ) Unique No (17848) Rate List Year (2024-2025) ITEM NO : 20 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. ( SSR Item No : 23.01 ) (PMC Bhavan ) Unique No (15297) Rate List Year (2024-2025) ITEM NO : 21 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center tocenter. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND ( R ) steel quality super durable polyester paint ( SSR Item No : 38.34 ) (PMC Bhavan ) Unique No (1155) Rate List Year (2023-2024) ITEM NO : 22 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant with scada as per approved mix design, admixtures, transporting to site, spreading, laying with skid vibrator,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. ( SSR Item No : 5.03 ) (PMC ROAD ) Item Spec : (MORTH 602) Unique No (175) Rate List Year (2023-2024) ITEM NO : 23 Providing and fixing 40mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating ,fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete ( SSR Item No : 40.6 ) (PMC Bhavan ) Unique No (15777) Rate List Year (2024-2025) ITEM NO : 24 Providing and fixing self supporting steel roofing system for a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, arch length 17.75 meter. The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of millimeter thick polycarbonate sheet of size 2’ x 7’ and turbo ventilator of 24’’diameter to be installed at every 30 feet along the length of roof including finishing, testing and cleaning etc. complete. ( SSR Item No : 38.41 ) (PMC Bhavan ) Unique No (15662) Rate List Year (2024-2025) ITEM NO : 25 Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish ( SSR Item No : 33.36 ) (PMC Bhavan ) Unique No (15504) Rate List Year (2024-2025) ITEM NO : 26 Providing and fixing steel window of various sizes as per detailed drawing without hot dip zinc coating, without ventilators, including fabricating / glazing with plain / obscured glass panels of approved type and quality, iron oxidised fixtures and fastenings, finishing with oil painting two coats complete (with guard bars 12 mm square at 10 cm c/c.) ( SSR Item No : 39.20 ) (PMC Bhavan ) Unique No (15694) Rate List Year (2024-2025) ITEM NO : 27 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track sect ion 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. ( SSR Item No : 39.37 ) (PMC Bhavan ) Unique No (15711) Rate List Year (2024-2025) ITEM NO : 28 Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade complete. Spec. Number : As directed by Engineer-in-charge. ( SSR Item No : 23.11 ) (PMC Bhavan ) Unique No (15306) Rate List Year (2024-2025) ITEM NO : 29 BITUMINOUS CONCRETE WITH SCADA:- Providing and laying bituminous concrete using crushed aggregates of grading II, premixed with bituminous binder @ 6% per cent by weight of total mix and filler, transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction for 50 mm compacted thickness with specified grade of Bitumen,Excluding prime / tack coat. For Bitumen of specified grade -- USING Batch mix type hot mix plant with SCADA, Sensor Paver with scada, vibratory roller with scada.with Stone Dust filler with Stone Dust filler. (VG-30 bulk bitumen rates are considered ) ( SSR Item No : 3.48 ) (PMC ROAD ) Unique No (627) Rate List Year (2024-2025) ITEM NO : 30 Stamped Concrete :- Thin overlay approximately 1/32 to 5/16 (thicker application may be nessecery in some situations) of stamped concrete overlays over M-20 concrete of 100 mm thicksurface, interior, applied smooth,textured or stamped in various patterns and designs using stamps and seamless texture skins, then antiqued, chemically stained or integrally colored and sealed with the appropriate coating. Systems sealers or protective top coats according to the job conditions and specifications. (including the cost of M-20 concrete of 100 mm thickness) ( SSR Item No : 1.10 ) (PMC ROAD ) Unique No (204) Rate List Year (2023-2024) ITEM NO : 31 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete ( SSR Item No : 27.13 ) (PMC Bhavan ) Unique No (15381) Rate List Year (2024-2025) ITEM NO : 32 Providing rough cast cement plaster externally in two coats with coloured cement finish to concrete/ brick/ stone masonry surfaces in all positions with base coat 12 to 15 mm. thick in C.M. 1:4 using gray cement and rough cast treatment 12 mm thick in proportion of 1:1 1/2:3 using colour pigment including scaffolding and fourteen days curing etc. complete. ( SSR Item No : 32.13 ) (PMC Bhavan ) Unique No (15446) Rate List Year (2024-2025)
Contract Date: Jun 22, 2026 Contract Value : 49.64 Lakh
Local Bodies No of Bidders 3
Maharashtra View Result →
20.
Power #11296610 AOC
Bids Are invited for Tools And Consumables Allen Key 8 Mm - Unbroko Or Kennedy Lenghth Of The Long Arm 100 Mm Lenghth Of The Short Arm 36 Mm Moc Chrome Vanedium Steel Black Finsh , Allen Key 10 Mm - Unbroko Or Kennedy Lenghth Of The Long Arm 112 Mm Lenghth Of The Short Arm 40 Mm Moc Chrome Vanedium Steel Black Finsh , Allen Key 22 Mm - Unbroko Or Kennedy Lenghth Of The Long Arm 200 Mm Lenghth Of The Short Arm 80 Mm Moc Chrome Vanedium Steel Black Finsh , Slugging Wrench - Mekaster Size 1 Inch Part No Ss-081 Moc Chrome Vanedium Steel Heavy Duty Black Industrial Finish Rust Resistant , Slugging Spanner - Mekaster Size 3/4 Inch Moc Chrome Vanedium Steel Heavy Duty Black Industrial Finish Rust Resistant , Reversible Ratchet Handle Half Inch - Griphold Part No 89_819 Head Dia 64 Mm Head Depth 29 Mm Gear Action 32 Mm Oal 605 Mm , Reversible Ratchet Handle Three Fourth Inch - Griphold Part No Grr 3/4 Inch Head Dia 64 Mm Head Depth 29 Mm Gear Action 32 Mm Oal 605 Mm , Torque Wrench - Mekaster Size 1/2 Inch Square Drive 7_35 Kg Part No Mtw_25R Widtht 50 Mm Height 29 Mm Length 805 Mm Weght 3.9 Kg , Torque Wrench - Mekaster Size 1/2 Inch Square Drive 25_135 Nm Part No Mtw_100R , Torque Wrench - Mekaster Size 1/2 Inch Square Drive 50_220 Nm Part No Mtw_160R , Torque Wrench - Mekaster Size 3/4 Inch Square Drive 135_675 Nm Part No Mtw_500R , Outside Micrometer - Mitutoyo Or Knnedy Or Oxford Range 200_225 Mm Graduation 0.01Mm Material Of The Frame Stainless Steel Material Of The Spindle And Anvil Hardened Stainless Steel , Soft Face Hammer 40 Mm With Steel Handle - Taparia Or Netco 40 Mm Dia , Center Punch - Taparia Length 125 Mm Diameter Of Tip 5 Mm Diameter Of Centre Punch Body 12 Mm Material High Grade Alloy Steel Conformity To Indian Standard Is 7177 1974 Or Equivalent With Latest Amdmnt , Straight Air Drill Machine - Chicago Pneumatic Or Kobe Air Inlet Thread 1/4 Inch Npt Spindle Thread 3/8_24, Minimum Air Hose Size 10 Mm Or 3/8Inch Chuck Capacity Air Pressure 6.5 Kg/Scm Overall Length 227 Mm Speed 2500 Rpm , Air Grinder - Chicago Pneumatic Or Kobe Cut Off Disc 100X2.5X16mm Air Inlet Thread 1/4 Inch Npt Spindle Thread 3/8Inch_24 Hose Size 10 Mm Or 3/8 Inch Air Pressure 6.5 Kg/Scm Overall Length 230 Mm Speed 15000 Rpm , Measuring Tape - Stanley Blade Length 3 Mtrs Blade Width 16 Mm , Tungsten Rotary Cutter 6X5mm - Miranda Size 6X5mm Ball Shape Shank Dia 6Mm , Tungsten Rotary Cutter 6X13mm - Miranda Size 6X13mm Cylindrical Radius End Shank Dia 6Mm , Tungsten Rotary Cutter 6X10mm - Miranda Size 6X10mm Oval Shape Shank Dia 6Mm , Tungsten Rotary Cutter 6X13mm - Miranda Size 6X13mm Cylindrical Shape Shank Dia 6Mm , Flat File - Jk Size 100 Mm Grade Of Cut Second , Half Round File Single Cut Grades Of Cut Second - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grades Of Cut Second , Half Round File Single Cut Grades Of Cut Bastard - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grades Of Cut Bastard , Half Round File Double Cut Grades Of Cut Second - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grade Of Cuts Second , Half Round File Double Cut Grades Of Cut Bastard - Jk Length 300 Mm Width 29Mm Thickness 8.5 Mm Length Of Tang 80 Mm Grade Of Cuts Bastard , Needle File - Kennedy 6 Piece Set Flat Hand Half Round Round Square Three Square , Cutting Wheel - Mico Bosch Or Grind Well Or Makita Or Black Decker Or Carborandum Size 1.0 Mmx16 Mmx100 Mm , Grinding Wheel Or Dc Wheel - Mico Bosch Or Grind Well Or Makita Or Black Decker Or Carborandum Size 4Mmx16mmx100mm , Gas Cutting Torch - Essab India Ltd. Model Cutogen 5 With One Nozzle Fuel Gas Type Oxy_Acetylene Material Brass , Welding Rod Ms 7018 36 H - Essab India Ltd Ms 7018 36 H Size 2.5X350mm Each Packet Containing 130 Pcs , Welding Rod Ss 308 - Essab India Ltd Ss 308 Size 2.5Mmx350mm Each Packet Containing 80 Pcs , Welding Rod Ss 309 - Esab India Ltd Ss 309 Size 2.5Mm X350mm Each Packet Containing 80 Pcs , Emery Paper Grade 120 - Grindwell Or Norton Or Carborundum Size 280X230 Mm As Per Indian Standards Is 3178_1996 Or Latest Al2o3 Percentage Min 55 % , Emery Tape Fine Grade - Carborundum Size W 50 Mmxl 50 Mtrs As Per Indian Standards Is 3178_1996 Or Latest Al2o3 Percentage Min 55 % , Cleaner - Checkmate Can Capacity 330 Ml Can , Developer - Checkmate Can Capacity 330 Ml Can , Penetrant - Checkmate Can Capacity 330 Ml Can , Rustolene Rust Disintegrator - 5 Ltr Can Non Corrosive Flash Point Min 45 Degree Celsius Colour Reddish Shelf Life 12 Months , Wire Brush - Material Of Bristle Steel Wire Materia Of Body Wooden Overall Width Of Brush 40 Mm Length Of Bristle 30 Mm , Tefflon Tape - Ch Ion Brand Thickness 2.5_3 Mils Length 10 Meter Width 1/2 Inch , Tig Electrode - Kennedy Size 2.4 X150 Mm , Air Hose Pipe Wire Embadded - High Pressure Rubber Hoose 3/8 Inch Dia Wire Mesh Type , Masking Tape 50 Mm - Avon Width 50 Mm Length 50 Meter , Ss Wire 1.6Mm - Ss Wire 1.6_304 Grade Soft , Ss Wire 2.4Mm - Ss Wire 2.4Mm_304 Grade Soft , Masking Tape 75 Mm - Avon Width 75 Mm Length 50 Meter , Half Inch Impact Hexagon Bit Socket 6 Mm Drive - Kennedy Or Stanley_Chrome Molybdenum Hexagonal Bit Size 6 Mm Overall Length75 Mm 1/2 Inch Square Drive Part No 89_188_1 , Half Inch Impact Hexagon Bit Socket 8 Mm Drive - Kennedy Or Stanley_Chrome Molybdenum Hexagonal Bit Size 8 Mm Overall Length 75 Mm 1/2 Inch Square Drive Part No_89_189_1 , Half Inch Impact Hexagon Bit Socket 14 Mm Drive - Kennedy Or Stanley_Chrome Molybdenum Hexagonal Bit Size 14 Mm Overall Length 75 Mm 1/2 Inch Square Drive Part No 89_192_1 , Half Inch Impact Hexagon Bit Socket 17 Mm Drive - Kennedy Or Stanley _Chrome Molybdenum Hexagonal Bit Size 17 Mm Overall Length 75 Mm 1/2 Inch Square Drive Part No 89_193_1 , Size 19Mm Three Fourth Inch Drive Socket 12 Point - Kennedy Or Stanley_Chrome Molybdenum Size 19 Mm Overall Length 95 Mm 3/4 Inch Square Drive Part No 89_619_1 , Jack Up Bolt M10 X 150Mm - Full Threaded Hexagonal Head High Tension Jack Up Bolt Metric Standard , Jack Up Bolt M12 X 150Mm - Full Threaded Hexagonal Head High Tension Jack Up Bolt Metric Standard , Jack Up Bolt M16 X 150Mm - Full Threaded Hexagonal Head High Tension Jack Up Bolt Metric Standard , Buff Flap Wheel - 6 Mm Shank Grit P60 Moc Aluminum Oxide , 11Mm Deep Socket 6 Point - 11Mm Drive 3/8 Inch Length 62Mm Code Ken_582_5730K , Combination Plier - Pro_Toque Combination Pliers With Side Cutters Length 180Mm Code Ken_558_4800K , Circlip Plier Set - Bent Nose Pliers Reversible For Both Internal And External Circlip Insertion And Removal Made From High Grade Carbon Steel With Comfortable Insulater Handles Ken_558_5930K , Hydraulic Hand Pump - Model Gp_392 Maximum Pressure 700 Bar , Hydraulic Jack Button Type - Capacity 50 T Stroke 16 Mm Close Height 72 Mm Extended Height 88 Mm , Hydraulic Jack With Hand Pump - Capacity 50 T Stroke 50 Mm Close Height 186 Mm Oil Capacity 354 Cm3 Part No Grac_502 , Air Micro Grinder 120 Degree Angle Grinders 3 Collet - Code No 109 Model Mag_121N 1/8 Part Number 5003109 With Accessories , Air Micro Grinder 90 Degree Angle Grinders 3 Collet - Mag-091N Part Number 50031400 With Accessories , Curbide Rotary Burrs 5X10 Mm - York Abbrasive Size 5X10mm Cylindrical Shape Shank Dia 3Mm , Curbide Rotary Burrs 3X15 Mm - York Abbrasive Size 3X15 Mm Taper Shape Shank Dia 3Mm , Oil Stone Size 150Mmx50mmx25mm Fine Grade - Oil Stone Size 150Mmx50mmx25mm Fine Grade) , Klinger Gasket 1.5Mm, Non Metallic - 1.5M X 2M Klinger 3Xa Caf Jointing Sheets Colour Graphite Black Max Tempreture 550 Deg Centigrade Max Pressure 200 Bar , Tinsnips - 14 Inch Cutting Capacity Cold Rolled Steel 1.20Mm Stainless Steel 0.75Mm, Part No 14_166 Stanely , Cylindrical Grinding Stone 10X20 Mm - Shank Dia 3Mm Part No Ken_250_1770K , Taper Grinding Stone 10X20 Mm - Shank Dia 3Mm Part No Ken_250_0520K , Taper Grinding Stone 21X50 Mm - Shank Dia 6Mm Part No Ken_250_0110K , Cylindrical Grinding Stone 20X50 Mm - Shank Dia 6Mm Part No Ken_250_2080K , Chain Hoist - Capacity 1Ton Standard Lift 3M , Triple Boiled Linseed Oil Sealing Compound - Gas Turbine Casing Joints Sealing Having High Pressure And Temperature Resistance , Premium Polyester Rope - Thickness 1 Inch Length 50 M , Dowsil Rtv Sealant 736 - 100% Silicon Rubber , Pneumatic Connector With Coupling - Size 3/8 Inch Total Quantity : 1100
Contract Date: Ref. Documents Contract Value : 7.76 Lakh
Boards / Undertakings / PSU No of Bidders 4
21.
Defence #11292278 Technical Bid
Tender for Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out In Soft/Loose Soil Complete All As Specified And Directed By Engr-In-Charge. , Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Any Type Of Soil Complete All As Specified And Directed. , Excavating In Trenches, N Exc 1.5 M Wide And N Exc 1.5 M In Depth; For Foundation, Etc. Or For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc. N Exc 10 Sq M On Plan And N Exc 1.5 M In Depth And Getting Out In Hard/Dense Soil Complete All As Specified And Directed. , Returning, Filling In, Including Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm Complete All As Specified And Directed. , Removing Excavated Material N Exc. 50M And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And Directed By Engr-In-Charge. , M&L For Hardcore Of Gauge N Exc. 63Mm (Of Broken Stone Or Boulders), Deposited, Spread And Levelled In Layers N Exc 15Cm Thick, Watered And Rammed To A True Surface Complete All As Specified And Directed By Engr-In-Charge. , M&L For Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) As In Foundation And Filling Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Cement Concrete Type C2, 1:3:6 (40Mm Stone Aggregate) As In Walls Or Retaining Walls, Any Thickness, Size Or Shape Including Pilasters, Buttresses Columns, Pillars, Boundary Pillars And Posts (Including Caps And Bases) Complete All As Specified And Directed. , Providing Cement Concrete Type B1 1:2:4 (20Mm Graded Aggregate) As In Roof Kerbs Or Mud Stops, Rounded Or Chamfered On Edges Complete All As Specified And Directed By Engr-In-Charge. , M&L For Type B1, 1:2:4 (20Mm Graded Aggregate) Pre-Cast Cement Concrete With Hollow Block Masonry, Exc. 10 Cm In Width And Setting In Cm 1:6, Complete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Beams, Cantilevers, Bressummers, Lintels Over 1.5M Span Complete All As Specified And Directed By Engr-In-Charge. , M&L For Reinforced Cement Concrete (Nominal Mix) Type B1, 1:2:4 (20Mm Graded Aggregate) As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Flat Formwork To Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Sup- Ports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. Complete All As Specified And Directed By Engr-In-Charge. , Use And Waste Square, Rectangular Or Polygonal Formwork To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And Directed By Engr-In-Charge. , M&L For Second Class Hard Wood In Scantling, Clean Sawn, Timber Framed And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 2Nd Class Hardwood Plain, Solid, Straight Chowkats And Frames, Wrought Framed Rebated On The Solid, Rounded Or Chamfered Put Together With Glue Pinned At Joints, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Glazed And Skelton Shutters, Open Rebated And Prepared To Receive Glass, Gauze Etc (Without Sash Bars) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass Etc Size Of Members Of Shuters As Specified In Ssr Part-I, Section 8, Clause 8.24(A), Fittted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F 30Mm Thick 2Nd Class Hardwood, Plain Framed, Framed, Panelled Shutter (Any Number Of Panels) With Panels Of Timber Flat On Both Sides (Feather Edged) Or Of Veneered Particle Board Medium Density, Wood Particle Board With Commercial Face Veneers Fitted To Chowkats, Complete All As Specified And Directed By Engr-In-Charge. , S&F Pvc Wall Lining Consisting Of 5Mm Thick Plain Colour Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specifications And Drawing, Complete All As Specified And Directed By Engr-In-Charge. , S&F 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Panelling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 200Mm Aluminium Anodised, Barrel Tower Bolts Of Extruded Section And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 250Mm Aluminium Alloy, Anodised, Sliding Door Bolt With Hasp, Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed, Complete All As Specified And Directed By Engr-In-Charge. , S&F 125Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 75Mm Butt Hinges, Mediam Weight, Cold Rolled Mild Steel And Fixed Complete All As Specified And Directed By Engr-In-Charge. , S&F 100Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S&F 150Mm Aluminium Handles, Cast Type, Anodised Complete All As Specified And Directed By Engr-In-Charge. , S &F Hand Rails, Half Round Or Other Steel Section Or Core For Wooden Hand-Rail Straight Portion, Drilled And Countersunk For Balusters Running Bars, For Doors, Balusters, Nosing To Steps Including Embeding In Concrete And Screwing Etc. Wind Ties For Roof Including Securing Bolts; Posts And Struts In Fencing Including Cutting Tops To Shape As Directed, Drilling Holes, Notching For Wire, Etc.; Flat Iron Fillets (For Securing Wire Mesh Etc.) Including All Necessary Drilling, Bolting Or Riveting, Etc., And Similar Work Conforming To Fe-290 Gde E-165 Complete All As Specified And Directed. , S&F Framed Work Such As Grills, Gratings, Etc. With Ends Of Bars Shouldered And/Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanks And Similar Work Conforming To Fe.290.Gde-E-165 Complete All As Specified And Directed By Engr-In-Charge. , S & F Ms Screw Bolt(Machine Made) With Hexagonal Or Squre Heads At One End And Screwed The Other Or Screwed Both Ends And Dia Of Bolt 11 To 15 Mm And Length Exc 10Cm N Exc 15 Cm Long Complete All As Specified And Directed. , S&F Mild Steel Round Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping Forcolumns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips For Chain Link Fencing Complete All As Specified And Directed. , Taking Down Of Electrical Switch Board Of Any Size/Tube Light/Ceiling Rose/Holder And Refixing After And Over Wall Panelling Complete All As Specified And Directed. , S&F Mild Steel Tmt Bars 10Mm Dia And Over, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Mild Steel Tmt Bars 5Mm Dia And Over Upto And Including 10Mm Dia In Stirrups, Spacers And Binders, Cut To Length, Bent To Shape Required, Including Cranking, Bending Spirally For Hooping For Columns, Hooking Ends And Binding With And Including Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Or Securing With Clips Complete All As Specified And Directed By Engr-In-Charge. , S&F Rolled Mild Steel Work As In Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed. , Fixing Only Chain Link Fencing Including Line Wires, Any Mesh, Size And Type To Any Type Of Standards, Rails, Straining Bolts, Etc. Including Provission Of Binding Wire, Complete All As Specified And Directed. , S & F Galvanised. 2 Strand, Steel Barbed Wire 2.24Mm Dia Barbed With 2Mm Dia Barbs At 75Mm Spacings And Straining And Fixing To Any Type Of Standard Rails Straining Bolts, Including, Securing Or Tying At Crossings With And Provision Of Galvanised Mild Steel Wire, Staples Or Steel Pins, Etc. As Directed (Each Line Wire To Be Measured) Complete All As Specified. , Supply Only Chain Link Fencing Mesh Size Of 100 X 100 Mm Of 4Mm Dia Galvanised Wire Complete All As Specified And Directed. , S&F Pre- Painted Galvalume Aluminum Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering /Cladding To Wall, Fixed With Self Tapping Screws As Specified Complete All As Specified And Directed. , S&F Pre-Painted Galvalume Aluminum Zinc Coating Gi Based Plain Steel Sheet 0.50Mm Thick Of Any Colour Having Tensile Strength Of 550 Mpa As In Roof Covering/Cladding To Wall, Fixed With Self Tapping Screws As Specified Complete All As Specified And Directed. , M&L For 3Mm Thick Cover Fillet Of Standard Hard Board, 40Mm Wide And Fixing With Screws Complete All As Specified And Directed By Engr-In-Charge. , M&L For 4Mm Thick Plywood, Grade Bwr, Type Bb, Fixed With Screws To Timber Frame Work In Ceiling, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Plain Cement Concrete 1:3:6 Type C2 (40Mm Graded Aggregate) As In Plinth Protection Complete All As Specified And Directed. , M&L For 100Mm Thick Cement Concrete 1:4:8 Type D2 (40 Mm Graged Aggregate) In Sub Base Or Floors, Complete All As Specified And Directed By Engr-In-Charge. , M&L For 75Mm Thick Cement Concrete Type D2, 1:4:8 (40Mm Graded Aggregate) As In Sub Base Or In Floors Complete All As Specified And Directed By Engr-In-Charge. , M&L For 25Mm Thick Cement Concrete Type B0, 1:2:4 (12.5Mm Graded Aggregate) As In Floors Complete All As Specified And Directed By Engr-In-Charge. , M&L For Chequered Cement Concrete Tiles 20Cm X 20Cm X 25Mm Thick, Set, Jointed And Pointed In Neat Cement Slurry In Floors With Grey Cement And Pigment Complete All As Specified And Directed By Engr-In-Charge. , M&L For Rendering 15Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cm 1:4 Complete All As Specified And Directed. , M&L For 20Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 For Laying Floor Finishes Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Obd Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , M&L For Preparation Of New Plastered Surface Of Wall And Applying Two Coat Of Cement Base Paint Over A Coat Of Priming Plastered And Other Surfaces With Alkali Resistant Priming Paint Complete All As Specified And Directed. , S&F 4Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square N Exc 0.5 Sq. M In Each Pane Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description, Not Otherwise Described Over 10Cm Width Or Girth, And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed By Engr-In-Charge. , M&L For Preparation Of New Steel Urfaces Of Any Description, Over 10Cm In Width Or Girth,Not Otherwise Described And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Crome Complete All As Specified And Directed. , Preparation Of New Steel Surfaces Of Any Description, N.Exc10cm In Width Or Girth When Unconnected With Other Painting Or When Painted In Adifferent Tint And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Zinc Crome Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
22.
Public Administrative Department #11290947 Technical Bid
Tender for Cartage Of Malva, Silt, Sludge Kankar And Other Disposable Organic Material Etc. All Complete With Labour T&P Including Cartage Of 8 Km. (Chapter No.3 Si.No.8) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (1 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (2 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Cartage Of Earth/Malva Up To 90 Meters By Head Load (3 Chain Only) Including Loading & Unloading Etc. All Complete. (3-Chapter Sr..No.234) , Earth Work In Filling In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 8Km. Form The Foundation Trenches Including Royalty@ 9.00 Per Cum. (Chapter No.4 Pwd.Sch.-253(A)+ Cptr No. 3 1 To 8 Km.) , Earth Work In Excavation In Foundation In Ordinary Soil (Loam, Clay Or Sand) Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Earth Work In Excavation In Foundation In Ordinary Soil Mixed With Moorum Shingle Kankar Requiring The Use Of Special Tools And Plants Such A Pick Axes Subbals Etc. Including, Lift Up To 1.50 M And Lead Up To 30M And Including Filling Watering And Ramming Of Excavated The Building And The Sides Of Foundation Trenches Or Into The Plinth And Removal And Disposal Of Surplus Earth As Directed By The Engineer-In-Charge Up To A Distance Of 30 M Form The Foundation Trenches. (Rate Including Royalty Of Earth Also) (4-Chapter Si.No.1) , Extra For Earth Work In Embankment Mechanically Compacted To 98% Proctor Density Ln Ordinary Soil, Excavation To Be Done Form Of Regular Pits Not Exceeding 0.5Mtr In Depth And Work In Embankment To Be In 20Cm Layer Including Ramming And Dressing Pulverization Surfacing Including Supply Of Labour, T&P, Roller And Water Sprinkle , Back Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20 Cm In Depth: Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50M And Lift Upto 1.5 M Incl. Cost Of All Labor Complete As Per Specifications , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 1.50M To 3M. , Supply & Fixing 3.5Kg And Or As Specified By The Manufacture, Harderner In Trexim Concrete Per Sqm. , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 3.00M To 4.50M. , Cleaning Jungles Including Uprooting Of Trunk Vegetation Grass, Bushes, Wood Trees And Sapling Of Girth Upto 30Cm Measured At A Height Of 1 Meter Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 Meters Out Side The Periphery Of Area Cleared. , Removal Of Silt For Nala/Nali In Liquid Mud Or Faul Position With Special T&P Including Lead 30M And Lift Up To 3.00M Etc. All Complete. (As Per Attached Sanctioned Rate Analysis) , Earth Work In Excavation In Ordinary Soil With Manually/Hydrolic Excavater In Foundation/Trench Or Drains. (A) Lift Up 4.50M To 6.00M. , Earth Work In Cutting Or In Embankment In Ordinary Soil Excavation To Be In The Form Of A Regular Pits Not Exceeding 0.50M In Depth And Earth Work In Embankment To Be In 20Cm Layers Including Ramming And Dressing The Surface To Required Lavels And Slops And Also Including 1.5 M Lift And 30 M Lead. The Earth In Form Of Cutting (B) To Be Used As Spoil Banks Within 50M Distance As Directed By The Engineer-In-Charge Etc. All Complete. (4-Chapter Si.No.3) , Sand Filling In Plinth Including Supply Of Necessary Quality Of Local Sand From A Distance Not Exceeding 8 Kms From The Site Of Work And Including Watering Dressing Etc.Required For Proper Completion Of Work (Chapter No.4 Si.No.6 ) , Providing And Laying Cement Concrete In 1:5:10 (1 Cement :5 Fine Sand 10 Stone Ballast 40 Mm Gauges) And Curing Complete, Including Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.1) , Providing And Laying Cement Concrete In 1:4:8 (1 Cement:4 Coarse Sand :8 Graded Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors (5-Chapter Sr.No.2) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand :6 Gladed Stone Aggregate 40 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work In Foundation And Floors. (5-Chapter Sr.No.3) , Providing And Laying Cement Concrete In 1:3:6 (1 Cement: 3 Coarse Sand:6 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. In Foundation And Floors. (5-Chapter Sr.No.5) , Providing And Laying Cement Concrete In 1:2:4 (1 Cement: 2 Coarse Sand :4 Graded Stone Aggregate 40 Mm Noffrinal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors..(5-Chapter Sr.No.6 Si.No..4.1.3) , Providing And Laying Cement Concrete In 1:1.5:3 (1Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) And Curing Complete, Lncluding Cost Of Form Work. Ln Foundation And Floors. (5-Chapter Sr.No.7) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement -All Work Up To Plinth Level: 1:2:4 (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete , Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Up To Plinth Leuel:1:2:4 In Raft Foundation (1Cement: 2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Including The Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement - All Work Trp To Plinth Level : 1:1.5:3 (1 Cement:1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size) Ch-S Si No- 5,1.2 , Reinforced Cement Concrete Work Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete,Slab Including The Cost Of Centering, Shutterang, Finishing And Excluding Reinforcement - Above Plinth Level Upto Fifth Floor Lable : 1:1.5:3 (1 Cement : 1.5 Coarse Sand : 3 Graded Stone , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Upto Plinth Level , Reinforced Cement Concrete Work In Walls/Columns (Any Thickness), Including Attachedpilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abulments, Posts And Struts Etc. Including Cost Of Centering, Shuttering, Finishing And Excluding Reinforcement:1:1.5:3 (1 Cement: 1.5 Coarse Sand ;3 Graded Stone Aggregate 20 Mm Nominal Size) Above Plinth Level Upto Fifth (V) Floor Lable , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Balconies, Shelves, Chajjas, Bands, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Including The Cost Of Centering, Shuttering, Finishing Exlcuding Reinforcement, With 1:1.5:3 In Heavier Beam (1 Cement: 1.5 Coarse Sand(Zone-Lll) : 3 Graded Stone). , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Work Up To Plinth Level (5-Chapter S.I. No.-16) , Providing And Laying In Position Machine Batched And Machine Mixed Design Mix M-25 Grade Cement Concrete For Reinforced Cement Concrete Work, Using Cement Content As Per Approved Design Mix, Including Pumping Of Concrete To Site Of Laying And Including The Cost Of Centering, Shuttering, Finishing But Excluding Reinforcement, Including Admixtures In Recommended Proporlions As Per Ls: 9103 To Accelerate, Retard Setting Of Concrete, Improve Workability Without Impairing Strength And Durability As Per Direction Of Engineer-Incharge.(Note :- Cement Content Considered In This Item Is @ 330 Kg/Cum. Excess/ Less Cement Used As Per Design Mix Is Payable / Recoverable Separately).All Works Above Plinth Level Upto Floor V Level (5-Chapter S.I. No.-16) , Class-150 (Non Modular) Brick Work In 1:6 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work.. ( Chapter No. 06 Sr.No. 1) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Foundation And Plinth Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapter No. 06 Sr.No. 2) , Class-150 (Non Modular) Brick Work In 1 :4 Cement And Fine Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Only 80Mm Thick Wall). (Chapter No. 06 Sr.No.3) , Class-150 (Non Modula0 Brick Work In L:3 Cement And Coarse Sand Mortar In Foundation And Plinth Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work (Chapter No. 06 Sr.No.4) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. ( Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand, Mortar In Super Structrure Including Supply Of All Materials, Labor And Tools And Plants, Etc. Required For Proper Completion Of The Work. (Chapte No. 06 S.I. No. 2+5) , Class-150 Brick Work In 1:4 Cement And Coarse Sand Mortor In Super Structure Above Plinth Level Upto Floor Five Level For Wall Thickness More Than 12Cm. Including Supply Of All Material, Labour And Tools And Plants Etc. All Complete. {Chapter No.6 Si.No.2+6} , Add Extra To Ltem No. 1 To 4 Above For Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 12Cm And Less. (Chapte No. 06 S.I. No. 2+4) , Add Extra To Ltem No. 1 To 4 Above But In Super Structure Above Plinth Level Upto Floor Five Level Including Necessary Cutting And Moulding Of Brick Work As Required And Also Including Honey Combed Brick Work In Thickness Of Wall 8Cm And Below. (Chapte No. 06 S.I. No. 2+4) , Providing And Laying Damp-Proof Course 40 Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.1} , Providing And Laying Damp-Proof Course 25 Mm Thick With Cement Concrete 1:2.4 (1 Cement : 2 Coarse Sand :4 Graded Stone Aggregate 12.5 Mm Nominal Size). {Chapter No.07 Si.No.2} , Providing & Applying A Coat Of Residual Petroleum Bitumen Of Grade Vg-10 Of Approved Quality Using 1.7K9 Per Square Metre On Damp Proof Course After Cleaning The Surface With Brushes And Finally With Piece Of Cloth Lightly Soaked In Kerosene Oil.. {Chapter No.07 Si.No.3} , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (A) 35Mm Thick. (Chapter No.9 Si.No.1-9.21.1) , Providing And Fixing Lsl Marked Flush Door Shutters Conforming Lo Ls : 2202 (Part L) Decorative Type, Core Of Block Board Construction With Frame Of 1 St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.Including Lsl Marked Stainless Steel Butt Hinges With Necessary Screws. (Excluding Cost Of Flttings). (2) 30Mm Thick. (Chapter No.9 Si.No.1-9.21.2) , Providing & Fixing 1.00 Mm Thick Decorative High Pressure Laminated Sheet Of Plain/Wood Grain In Gloss/Matt/Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Uality Conforming To Is : 2046 Type S, Including Cost Of Aadhesive Of Approved Quality. , Providing And Fixing Factory Made Panel Pvc Door Shutter Consisting Of Frame Made Out Of M.S. Tubes Of 19 Gauge Thickness And Size Of 19 Mm X 19 Mm For Styless And 15X15 Mm For Top & Bottom Rails. M.S. Frame Shall Have A Coat Of Steel Primers Of Approved Make And Manufacture. M.S. Frame Covered With 5 Mm Thick Heat Moulded Pvc C Channel Of Size 30 Mm Thickness, 70 Mm Width Out Of Which 50 Mm Shal Be Flat And 20 Mm Shalll Be Tapered In 45 Degree Angle On Both Sides Forming Styless And 5 Mm Thick, 95 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered In 45 Degree On The Inner Side To Form Top And Bottom Rail And 115 Mm Wide Pvc Sheet Out Of Which 75 Mm Shall Be Flat And 20 Mm Shall Be Tapered On Both Sides To Form Lock Rail And Lock Rails Shall Be Top, Bottom And Lock Rails Shall Be Provided Both Sides Of The Panel. 10 Mm (5 Mm X 2) Thick, 20 Mm Wide Cross Pvc Sheet Be Provided As Gap Insert For Top Rail & Bottom Rail. Paneling Of 5 Mm Thick Both Side Pvc Sheet To Be Fitted In The M.S. Frame Welded/Sealed To The Styles & Rails With 7 Mm (5 Mm + 2 Mm) Thick X 15 Mm Wide Pvc Sheet Beading On Inner Side, And Joined Together With Solvent Cement Adhesive. An Additional 5 Mm Thick Pvc Strip Of 20 Mm Width Is To Be Stuck On The Interrior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Complete As Per Direction Of Engineer-In-Charge, Manufacturers Specification & Drawing.30 Mm Thick Pre Laminated Pvc Door Shutters , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Ls: 1868, Minimum Anodic Coating Of Grade Ac 15) , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Ls: 733 And Ls: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdiv] Rubbe, Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Requlred Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) :For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately). Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item): With Float Glass Panes Of 4.0 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 5.5 Mm Thickness , Provdmg And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per (Cost Of Aluminium Snap Bead:Ng Shall Be Paid In Basic Item):With Float Glass Panes Of 8.0 Mm Thickness , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315 , Having Brand Logo Embossed On The Body/ Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors Including Cost Of Cutting Floors ,Embeding In Floors As Required And Making Good The Same Matching To The Existing Floor . Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Entineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25 Mm Thickness. , Providing And Tixing Factory Made Upvc White Colour Casement/ Casement Cum Frxed Glazed Door Comprising Of Upvc Multi-L Chambered Frame. Sash And Mullion (Where Ever Required) Extrlcled Profiles Dl,Ly Reinforced With 1.60 T 0 2 Mm Thick I Galvalized Mild Steel Section Made From Roll Forming Process Of Iequrred Length {Shape & Size According To Upvc Profile), I Ldvc Extruded Glazing Beads Of Appropriate Dimension. Epdi\/L Gasket. Znc Alloy (White Powder Coated) 3D Hrnges And One Handle On Each Side Of Panels Along With Zinc Plated Mild Steel Rnulti Point Locking Having Transmission Gear, Cylinder With Keeps And One Sicle Key, G.L Fasteners 100 X I Mm Size For Fixing Frame To Finished Wall And Necessary Stainless Steel Screws Etc. Profile Of Frame & Sash Shall Be Mitred Cut And Fusion Welded At All Corners, Mullion (If Required) Shall Be Also Fusion Weldecl Including Drilling Of Holes For Fixing Hardwares And Drainage Of Water Etc. Afier Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealent Over Backer Rod Of Required Size And Of Approvecl Quality, All Complete As Per Approved Drawing & Cllrection Of Engineer-In-Charge. (Single I Double Glass Panes And Sllicon Sealent Shall Be Paid Separately) Note: For Upvc Frame, Sash And Mullion Extruded Profiles Minus 5% Tolerance In Dlrnension I.E. In Depth & Width Of Profile Shall Be Acceptable Variation In Profile Dimension In Higher Side Shall Be Accepted But No Extra Payment On This Account Shall Be Made. Casement Door With 3D Hinges Made Of (Big Series) Frame 67 X 64 Rm & Sasn 67 X 1 10 Mm Both Having Wall Thickness Of 2.3 I 0.2 ^Rr Ancl Single Glazing Bead / Double Glazing Bead Of Lappopiate D.Mersion. (Area Of Door Upto L2 00 Sqm). , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Providng And Fixing Fictory Made Solid Foam Upvc Profile For Kitchen Cabinet Fram E (45 X 20 Mm) Of Approved Shade, Quality Ancl Make. The Profile Shall Be Laminated On Both Sides, Made From Rigid Foam Sheets (Single Extruded) Having Density 600 Kg/Cum And The Exposed Edges Sealed With Pvc Edge Beading Of Same Shade And Colour. The Frame Shall Be Fire Retardent With Necessary Screw Holding Capacity. Frame Shall Be Fixed To Wall Using Expendable Fastner With Necesary Stainless Steel Screws, All Complete As Per Direction Of Engineer-In- Charge , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Structural Steel Work In Single Section, Fixed With Or Withoul Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting,Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required Heavy Size Such As Trusses Built , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Apptying A Priming Coat Of Approved Steel Primer.(Chapter No.10 Si.No.4-10.3) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pjpe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\4.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover (Upto 10.00 Sqm).(Chapter No.10 Si.No.4-10.5) , Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Ls: 4454 - Part 1 And L\Il.S. Top Cover Of Required Thickness For Rolling Shutters.. 80X,1.25 Mm M.S. Laths With 1 .25 Mm Thick Top Cover Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 10.00 Sqm And Upto 16.80 Sqm/Above In The Area , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc, Complete. Hot Finished Welded Type Tubes , Supply And Fixing Stainless Steel (Grade 304) Ralling Made Of Hollow Tubes, Channels, Plates Etc. Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Steel Nuts And Bolts Complete. I/C Fixing The Ralling With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer In-Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts Fasteners Etc.). (Chapter No.10 Si. No. 14 New) , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Galvanised M.S. Wire Gauze With 0.63 Mm Dia Wire And 1 .4 Mm Aperture On Both Sides , Providing & Fixing Fly Proof Wire Gauze To Windows, Clerestory Windows & Doors With M.S. Flat 15X3 Mm And Nuts & Bolts Complete Stainless Steel (Grade 304) Wire Gauze Of 0.5 Mm Dia Wire And 1.4 Mm Aperture On Both Sides , Painting Top Of Roofs With Bitumen Of Approved Quality @ 17Kg Per 10 Sqm Impregasted With A Cost Of Coarse Sand At 60 Codm Per 10 Sgm, Including Cleaning The Slab Surface With Keroseme Oil Complete : With Residual Type Petroleum Bitmen Of Grade Vg-10 , Providing And Laying Integral Cement Based Water Proofing Itreatment Including Preparation Of Surface As Required For Itreatment Of Roofs, Balconies, Terraces Etc Consisting Of Lfollowing Operations: (A) Applying A Slurry Coat Of Neat Cement Lusing 2.75 Kg/Sqm Of Cement Admixed With Water Proofing Lcompound Conforming To Ls. 2645 And Approved By I E Ng Ineer-In-Charge Over The Reinforced Cement Concrete Slab Including Adjoining Walls Lupto 300 Mm Height Including Cleaning The Surface Before Llreatment. B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 125 Mm To 115 Mm Size With 50% Of Cement Mortar 1:5 (1 L Cement : 5 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Over 20 Mm Thick Layer Of Cement Mortar Of Mix 1:5 (1 Cement :5 Coarse Sand ) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge To Required Slope And Treating Similarly The Adjoining Walls Upto 300 Mm Height Including Rounding Ofjunctions Of Walls And Slabs. (C) After Two Days Of Proper Curing Applying A Second Coat Of Cement Slurry Using 2.75 Kg/ Sqm Of Cement Admixed With Water Proofing Compound Conforming To Lb : 2645 And Approved By Engineer-In-Charge (D) Finishing The Surface With 20 Mm Thick Jointless Cement Mortar Of Mix L:4 (1 Cement :4 Coarse Sand) Admixed With Water Proofing Compound Conforming To Ls:2645 And Approved By Engineer-In-Charge Includlng Laying Glass Fibre Cloth Of Approved Quality In Top Layer Of Plaster And Finally Finjshing The Surface With Lrowel With Neat Cement Slurry And Making Pattern Of 300X300 Mm Square 3 Mm Deep (E) The Whole Terrace So Finished Shall Be Flooded With Water For A Minimum Period Of Two Weeks For Curing And For Final Test.All Above Operations To Be Done In Order And As Directed And Specified By The Engineer-In-Charge :Wth Average Thickness Of 120 Mm And Minimum Thickness At Khurra As 65Mm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 1.00 Mm Thick With Zinc Coating Not Less Than 275 Gm/Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 80 Mm Thick With Zinc Coating Not Less Than 275 Gm/ Sqm , Providing Corrugated G.S. Sheet Roofing Including Vertical /Curved Surface Fixed Wit Polymer Coated J Or L Hooks, Bolts And Nuts B Mm Diameter With Bitumen And G.L. Limpet Washers Or With G.L. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete (Up To Any Pitch In Horizontal/Vertical Or Curved Surfaces), Excluding The Cost Of Purlins,Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 0.63 Mm Thick With Zinc Coating Not Less Than 275 Gm/ M , Providing And Laying Six Courses Water Proofing Teatment With Bitumen Felt Over, Roofs Consisting Of First, Third And Llfth Course Of Blown Bitumen 85/25 Or 9O/15 Conforming To Ls : 702 Applied Hot @ 1.45, L.2O And 1.45 Kg Per Square Metre Of Area Respitively, Second And Fourth Courses Of Roofing Felt Lype 3 Grade I Conforming To Ls : 1322 (Hessian Based Self Flnished ;Itumen Felt) , Sixth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Sqm Iniluding Preparation Of Surface But Excluding Grading, Complete. , 10 Cm Thick (Average) Mud Phaska Of Damped Brick Earth On Roofs Laid To Slope Consolidated And Plastered With 25 Mm Thick Mud Mortar Mixed With Bhusa @ 35 Kg Per Cum Of Earth And Gobri Leaping With Mix 1:1 (1 Clay: 1 Cow Dung) And Covered With Flat Tile Bricks, Grouted With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Mixed With 2% Of Integral Water Proofing Compound By Weight Of Cement And Finished Neat: With Common Burnt Clay F.P.S.(Non Modular) Brick Tile Of Class Designation 10 , Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineerin-Charge) 0 50 Mm (+ 0.05 %) Total Coated Hickness With Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Icrons Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer-In-Charge, The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roollng Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Ls: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete :Ridges Plain (500 - 600Mm) , Providing And Fixing 12 Mm Thick Prelaminated Particle Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Ls: 12823 Grade Ltype Ll, In Anelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge.Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing 12 Mm Thick Panelling Or Panelling And Glazing In Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows (Area Of Opening For Panel Inserts Excluding Portion Inside Grooves Or Rebates To Be Measured). Panelling For Panelled Or Panelled And Glazed Shutters 25 Mm To 40 Mm Thick. I\4Arine Plywood Conforming To Ls: 710 , Providing And Fixing Tiled False Ceiling Of Specilled Materials Of Size 595X595 Mm In Lrue Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanlzed @ 120 Grams/ Sqtn, Both Side Inclusive) Consisting Of Main T Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick (Minimum) Sheet, Spaced At 1200 Mm Center To Center And Cross T Of Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet, 1200 Mm Long Spaced Between Main T At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross T Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick (Minimum) Sheet To Be Interlocked At Middle Of The 1200X600 Mm Panel Lo Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting/Making, Opening For Services Like Diffusers, Grills, Iight Fittings, Fixtures, Smoke Detectors Etc. Main T Runners To Be Suspended From Ceiling Using Gl Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4 Mm Gl Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottom Exposed Width Of 24 Mm Of All T- Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And As Directed By Engineer-In-Charge. Gl Metal Ceiling Lay In Plain Tegular Edge Global White Color Tiles Of Size 595X595 Mm, And 0.5 Mm Thick With 8 Mm Drop; Made Of G Lsheet Having Galvanizing Of 100 Gms/Sqm (Both Sides Inclusive) And Electro Statically Polyester Powder Coated Of Thickness 60 Microns (Minimum), Including Factory Painted After Bending , Providing And Fixing False Ceiling At All Heights With Integral Densified Calcium Silicate Reinforced With Fibre And Natural Filler False Ceiling Tiles Of Size 595X595mm Of Approved Texture, Design And Patterns Having Nrc (Noise Reduction Coefficient) Of 0.50 (Minimum) As Per Ls 8225:1987, Light Reflectance Of 85%(Minimum). Non Combustible As Per Bs:476 (Part-4), Fire Performance As Per Bsi476 (Part 6 &7), Humidity Resistance Of 100%, Thermal Conductivity 0.043 W/M K As Per Astm 518:1991,In True Horizontal Level Suspended On Inter- Locking Metal T-Grid Of Hot Dipped Galvanised Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 24X38 Mm Of Length 3000 Mm, Cross - T Of Size 24X32 Mm Of Length 1200 Mm And Secondary Intermediate Cross-T Of Size 24X32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600 Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E. 50 Mm Long, I Mm Outer Diameter M-6 Dash Fasteners, 6 Mm Dia Fully Threaded Hanger Rod Upto1000 Mm Length And L-Shape Level Adjuster Of Size 85X25x25x2 Mm. Galvanised Iron Perimeter Wall Angle Of Size 24X24x0.40 Mm Ol Length 3000 Mm To Be Fixed On Periphery Wall / Partition With The Help Of Plastic Rawl Plugs At 460 Mm Center To Center And 40 Mm Long Dry Wall S.S Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-Incharge. With 15 Mm Thick Tegular Edged Light Weight Calcium Silicate False Ceiling Tiles. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of L:6 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Flool Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceedlng 80Mm. Ln Girth And Finished Even And Smooth. , 12Mm Cement Plaster With Cement Mortar In Proportion Of 1:4 Cement & Fine Sand (Not Less Than In 1.25 Fm) Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:3 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 15Mm Cement Plaster With Cemeni Mortar In Proportion Of 1:4 Cement &.Coarse Sand Of Single Coat For Exterior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding 80Mm. Ln Girth And Finished Even And Smooth. , 20 Mm Cement Plaster 1:3 (L Cement:3 Coarse Sand) Linished With A Floating Coat Of Neat Cement. , 20Mm Cement Plaster With Cement Mortar In Proportion Of L:4 Cement & Coarse Sand Of Single Coat For Interior Plastering Upto Floor Two Level Including Internal Rounded Angles Chamfers, And Rounded Angles Not Exceeding Bomm. Ln Girth And Finished Even And Smooth , 6Mm Thick Celling Plaster 1:3 (1 Cement :3 Fine Sand) Cement & Fine Sand In F.M Not Less Than 1.25, 1:3 Including Chipping Of Reinforced Cement Concrete Surface Before Celing Plaster. The Cost Of Including At Material, Labor T&P And Scafolding Etc Complete. (Chapter No.13 Si.No.13) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Morlar1:4 (1 Cement: 4 Coarse Sand) , Supply/Fixing Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard, Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles, Including Rubbing And Cleaning Etc. Complete, On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement: 4 Coarse Sand). Including 50Mm Thick Base With Concrete 1:4Rb Complete As Per E/L , Marble Tiles Stone Slabs 18 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With : Marble White Dhungriquality , Marble Stone Flooring With 20 Mm Thick Marble Stone, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Coment Mattar 1:4 (1 Cement: 4 Coarse Sand) Lald And Jointed Wlth Grey Cement Slurry, Including Rubbing And Polishing Complete With: White Alebeta White Stone , Kota Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab, Including Rubbing And Polishing Complete With Base Of Cement Mortar 1: 4 (1 Cement: 4 Coarse Sand) : 25 Mm Thick , Kota Stone Slabs 20 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm (Average) Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete , 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Moftar 1:5 (L Cement: 5 Coarse Sand)With Joints Finished Flush.Red Sand Stone , Prividing & Laying Ceramic Non Skid Floor Tiles Of Size 300X300 Mm (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming Tq Ls : 15622 Of Approved Make In Colours Such As White, Lvory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/Sqm Including Pointing The Ioints With White Cement And Matching Pigment Etc., Complete. , Providing & Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Ls : 15622 (Thickness To Be Specified By The Manufacturer )Of Approved Make In Atl Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-Incharge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Morta|L:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 33Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Laying Vitrified Tiles 500X500mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providing And Laying Vitrified Tiles 600X600mm Size (Thickness 10Mm), With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Brand Manufacture, In Desired Colours And Shades, Laid With Cement Based High Polymer Modified Quick Set Tile Adhesive (Water Based) Conforming To Is : 15477, Including Grouting Of Joints. Including 75Mm Thick Base With Concrte 1:4:8 Complete As Per E/I Etc. All Complete. (Chapter No.14 Sr.No.20) , Providlng And Laying Polished Granite Jet Black Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge.{Chapter No.14 Si.No.27} , Stone Work (Machine Cut Edges) For Wall Llning Etc. (Veneer Work) Upto10 Metre Height, Backing Filled With A Grout Of Avercge 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Polnting In White Cement Mortar 1:2 (1 White Cement R 2 Stone Dust) Wlth An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Plns Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Flne Dressed With Rough Backing. 30 Mm Thick , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. Including Curing The Cost Of All Material, Labour, T&P Etc. Complete. (Chapter No.15 Si.No.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Ofwork. , Finishing Walls With Water Proofing Cement Paint Of Required Shade : New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) Supply Of All Labour Material And T&P Requlred For Proper Completion Of Work. , Finishing Walls With Textured Exterior Paint Of Required Shade New Work (Two Or More Coats Applied @ 328 Ll Lo Sqm) Over And Including Priming Coat Of Exterior Primer Applied @ 2.20K9/10 Sqm Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade ; New Work (Two Or More Coat Applied @ 1.67 Llth) Sqm Over And Including Priming Coat Ofexterior Primer Applied @ 2 20 Kg/10 Sqm) Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/L0 Sqm Over An Under Coat Of Primer Applled @ O.B0 Ltr/10 Sqm Of Approved Brand And Manufacture. Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacturb Supply Of All Labour Material And T&P Required For Proper Completion Of Work , Paint Of The Two Coat Over Primer Coat Wood Surface And Etc. All Complete.(15-Chapter Si.No.8+10+11) , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Upto 10 Cm In Width , Applying Priming Coat: With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood) Including Cost Of All Materials, Labour T&P Etc Required For Proper Completion Of Work , Wall Painting With Acrylic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade : Two Or More Coats On New Work Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade Two Or More Coats On New Work Includlng Cost Of All Materials, Labour T&P Etc. Required For Proper Completion Of Work Wood And Steel , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade : Two Or More Coats On New Work Over An Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. Supply Of All Labour Material And T&P Required For Proper Completion Of Work. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..One Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Distempering With 1St Quality Acrylic Distemper, Having Voc (Volatile Organic Compound) Content Less Than 50 Grams/ Litre, Of Approved Brand And Manufacture, Including Applying Additional Coats Wherever Required, To Achieve Even Shade And Colour..Two Coat Including The Cost Of All Material, Labour, T&P Etc Complete. , Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Sudace Smooth Including Necessary Repairs To Scratches Etc. Complete. , Distempering With Lst Quality Acrylic Distember (Ready Mix) Having Voc Content Less Than 50 Grams/ Litre Of Approved Brand And Manufacture To Give An Even Shade:Old Work (One Or More Coats) , White Washing Wth Lime On Undecorated Wall Surface (One Coat) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , White Washing Wth Lime On Undecorated Wall Surface (Three Or More Coats) To Give An Even Shade Including Thoroughly Brooming The Surface To Remove All Dirt, Dust Mortar Drop And Loose Scales Of Lime Wash And Other Foreign Matter. , Colour Washing Such As Green, Blue And Other Coloures Or Buff To Give An Even Shade New Work Colour Washing (Two Coats) With A Base Coat Of White Washing With Limes Including Cost Of All T&P Other Complete Work. , Removing White Or Colour Wash By Scrapping And Sand Papering And Pteparing The Surface Smooth Including Necessary Repairs To Scratches Etc Complete , Demolishing Cement Concrete Manually Including Disposal Of Materialwithin 50 Metres Lead , Dismantling Reinforced Cement Concrete Or Reinforced Brick Work Including Stacking Of Materials As Directed By E/Ic With In A Distance Of 60 Meters (200 Feet). (17-Chapter Pwd. No.694) , Demolishing R.B. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-Incharqe. , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge In Cement Mortar. (17-Chapter Si.No.6) , Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Eng;Neer-In-Charge : Ln Lime Mortar , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead Of Area 3 Sq. Metres And Below , Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: R.S. Joists , Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. (17-Chapter Si.No.16) , Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Wlthin 50 Metres Lead. , Dismantling Of Old Interlocking Tiles Pavement Including Staking Of Serviceable Material And Disposal Of Unserviceable Material Within Lead Of 50M As Per Direction Of Engineer In Charge. (Ns) , Random Rubble Masonry 1:6 (1 Cement: 6 Coarse Sand), With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 (1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size).Upto Plinth Level With , Random Rubble Masonry 1:6 (1 Cement : 6 Coarse Sand), With Hard Stone In Superstructure Above Plinth Level And Upto Floor Five Level, Including Leveling Up With Cement Concrete 1:6:12 (L Cement:6 Coarse Sand:12 Graded Stone Aggregaie 20 Mm Nominal Size) At Window Sills, Ceiling Level And The Like , 30 Mm Red Sand Stone Sun-Shade (Chisel-Dressed) Supported On Red Sand Stone Brackets, Fixed In Walls With Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Including Finishing Complete. , Providing And Fixing Red Sand Stone Jali 40 Mm Thick Throughout In Cement Mortar 1R3 (1 Cement : 3 Coarse Sand), Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment, Matching The Stone Shade, Jali Slab Without Any Chamfers Etc , Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement: 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade: (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick (Chapter No.18 Si.No.7) , Supply And Fixing 500 Liter Pvc. Sintex Water Tank Etc. All Complete. (19-Chapter Sr.No.2(C)) , Laying Brick Soling Layer On Prepared Sub-Grade With Brick On End Edging According To Lines, Graded And Cross-Section Shown On The Drawing Filling Joints With Sand And Earth, Spreading 25 Mm Thick Layer Of Earth Over Brick Soling, Watering And Rolliing The Same With Three Wheel Road Roller 80-100 Kn As Per Technical Specification Clause 412 , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Providing And Iaying Np-3 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Slngle Row Including Fixing Socket With Cement Mortar L:2 But Excluding Excavation, Protection Works Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 350Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 600Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 900Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1000Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1200Mm Dia , Laying Np-4 Pipe Reinforced Cement Concrete Concrete Pipe For Culvert On First Class In Single Row Includ Ng Flxing Socket With Cement Mortar 1:2 But Excluding Excavation, Protection Works, Backfilling, Concrete And Masonry Works In Head Walls And Parapets Clause 2900. 1400Mm Dia , Constuction Of Un-Reinforced, Plain Cement Concrete Avement Thickness As Per Disign, Over A Prepared Sub Base With 43 Grade Cement Or Any Other Type As Per Clause 1501.2.2 M-30 (Grade), Coarse And Fine Aggregate Conforming To Is 383, Maximum Size Of Coarse Aggregate Not Exeeding 25Mm, Mixed In A Concrete Mixer Of Not Less Than 0.2 Cum Acapacity And Apporopriate Weigh Batcher Using Approved Mix Design, Laid In Approved Fixed Side Formwork (Steel Channel, Laying And Fixing Of 125 Micron Thick Polythene Film Wedges, Steel Plates Including Levelling The Formwork As Per Drawing), Spreading The Concrete With Shovels, Rakes, Compacted Using Needle, Screed And Plate Vibrators And Finished In Continous Aperation Including Provision Of Contraction, Expansion, Construction And Constructionl Joints, Applying Debonding Strips, Primer, Sealant, Dowel Bars, Near Approaches To Bridge/Culvert And Construction Joints, Admixtures As Approved, Curing Of Concrete Slabs For 14 Days, Curing Comound (Where Apecified) And Water Finishing To Lines And Grade As Per Drawing And Technical And Technical Sepcification Clause 1501. (For Agra). (Chapter No.20 Si.No.12) , Construction Of Un-Reinforced, Plain Cement Concrete Pavement Over A Prepared Sub Base With Approve Grade Cement @ 400 Kg Per Cum, Coarse And Fine Aggregate Conforming To Ls 383, Maximum Size Of Coarse Aggregate Not Exceeding 25 Mm, Mixed In A Batching And Mixing Plant As Per Approved Mix Design, Transported To Site, Laid With A Fixed Form Or Slip Form Paver, Spread, Compacted And Finished In A Continuous Operation Including Provision Of Contraction, Expansion, Construction And Longitudinal Joints, Joint Filler, Separation Membrane, Sealant Prim Er, Joint Sealant, Debonding Strip, Admixtures As Approved, Curing Compound, Finishing To Lines And Grades As Per Drawing For Agra , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 60 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 80 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work.80 Mm (Rubber Molded Coloured) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Ordinary Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Grey) , Supply & Laying Of I Shaped (Zigzag) Precast Lnterlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50K9) Lncluding 0.30Mm Thick Local Sand Base Levelling And Dressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Complete Work. 100 Mm (Rubber Molded Coloured) , Re-Laying Of I Shaped Precast Interlocking Tiles Of Thickness 60 To 100Mm (Compressive Strength Not Less Then 30Mpa And Weight 4.50Kg) Including 25Mm Thick Loacal Sand Base Levelling And Ressing Of Surface To Required Level And Slope, Filling Joints With Local Sand All Comlete Work. Including Vat (Chapter No.20 Si.No.19 New Item) , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe. (Lnternal Work - Exposed On Wall) 32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 40Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.(Lnternal Work - Exposed On Wall) 50Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.15Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.20Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.25Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fiftings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fiitings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Enoineer In Charqe.Concealed Work, Including Cutting Chases And Making Good The Wall Etc.32Mm Nominal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 15 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 20 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 25 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 32 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 40 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 62.50 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 75 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 100 Mm Nonrinal Dia Pipes , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineerin-Charge. External Work 150 Mm Nonrinal Dia Pipes , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 15 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 20 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 25 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 32 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 40 Mm Dia Nominal Bore , Providing And Fixing G.L. Pipes Complete With G.L. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc.Lnternal Work Exposed On Wall. 50 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 15 Mm Dia Nominal Bore , Providing & Fixing Gl Pipes Complete With Gl Fittings And Clamps Including Making Good The Walls Etc. Concealed Pipe Including Painting With Anti Corrosive Bitumastic Paint, Cutting Chases And Making Good The Wall: 20 Mm Dia Nominal Bore , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 60X60x75 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 90X90x100 Cm Lnside , Constructing Masonry Chamber Brick Work With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 150 In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.L. Surface Box 100Mm Top Diameter, 100 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Reinforced Cement Concrete Top Slab 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ), I/C Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement: 5 Fine Sand: 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Nrortar:3 (1 Cement: 3 Coarse Sand) 12 Mm Thick, Inished With A Floating Coat Of Neat Cement Complete As Per Standard Design 120X120x100 Cm Lnside , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Ls : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: W.C. Pan With Lsl Marked White Solid Plastic Seat And Lid , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required One Urinal Basin With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Two Urinal Basins With 5 Litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Three Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitreous China Flat Back Or Wal Corner Type Lipped Front Urinal Basin Of 30X260x350 Mm And 340X410x265 Mm Sizes Respectrvely With Automatic Flushing Cistern With Standard Flush Pipe And C.P. Brass Spreaders With Brass Unions And G.L Clamps Complete, Lncluding Painting Of Fittings And Brackets, Cutting And Making Good The Walls And Floors Wherever Required Range Of Four Urinal Basins With L0litre White P.V.C. Automatic Flushing Cistern , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require: (White Vitreous China Wash Basin Size 630X450 Mm With A Pair Of 15 Mm C. P. Brass Pillar Taps) {Chapter No.24 Si.No.5A} , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 630X450 Mm With A Single 15 Mm C.P. Brass Pillar Tap , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Wash Basin Size 550X400 Mm With A Pajr Of 15 Mm C.P. Brass Pillar Taps , Providing And Fixing Wash Basin With C.L. Brackets, 15 Mm C.P. Brass Pillar Taps,32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets,Cutting And Making Good The Walls Wherever Require:White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm C.P. Brass Pillartap , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.6A) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350 Mm With White Pvc Automatic Flushing Cistern, With Fittings, Standard Size C.P. Brass Flush Pi Pe, Spreaders With Unions And Clamps (All In C.P. Brass) With Waste Fitting As Per Ls:2556, C.L. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fittlngs And Cutting And Making Good The Walls And Floors Wherever Requlred:Range Of Two Half Stall Urinals With 5 Litre Pvc. Automatic Flushing Cistern , Constructing Brick Masonary Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 455X610mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (A) Inside Dimensions 455X610mm And 45Cm Deep For Single Pipe Line : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.6A) , Constructing Brick Massonry Chamber For Underground C.I. Inspection Chamber And Bends With Bricks In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) C.I. Cover With Frame (Light Duty) 600X850mm Internal Dimensions, Total Weight Of Cover With Frame To Be Not Less Than 38Kg (Weight Of Cover 23Kg And Weight Of Frame 15Kg), Reinforced Cement Concrete Top Slat With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size), Foundation Concrete 1 :5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40Mm Nominal Size), Inside Plastering 12Mm Thick With Cement Mortal 1:3 (1 Cement : 3 Coarse Sand), Finished Smooth With A Floating Coat Of Neat Cement On Walls And Bed Concrete Etc. Complete As Per Standard Desing: (C) Inside Dimensions 600X850mm And 45Cm Deep For Pipe Line With Three Or More Inlets : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation M-150). {Chapter No.25 Si.No.8C) , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) Hindi Letters , Reinforced Cement Concrete M15 Grade Kilometre Stone Of Standard Design As Per Irc:8, Fixing In Position Including Painting And Printing Etc Sl No-804 As Per Direction Of Enginee-In-Charges Morth Standard Data Book. 5Th Kilometre Stone (Precast) (10 Cm Height Each) English Letters , Reinforced Cement Concrete M15 Grade Boundary Pillars/ Wheel Guard Of Standard Design As Per Irc:25-1967, Fixed In Position Including Finishing And Lettering But Excluding Painting , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.2 Metre High , Providing And Fixing L2 Metres High Gl Barbed Wire Fencing With 1.8 M Angle Iron Posts 40 Mm X 40 Mm X 6 Mm Placed Every 3 Metres Center To Center Founded In M15 Grade Cement Concrete, 0.6 Metre Below Ground Level, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post On One Side Only And Provided With T Horizontal Lines And 2 Diagonals Intemoven With Horizontal Wires, Fixed With Gi Staples, Turn Buckles Etc. Complete As Per Clause 817 As Per Direction Of Enginee-Incharges Morth Standard Data Book. G.L Barbed Wire Fencing 1.8 Metre High , Deduction Of Cost Brick/Bats. (Chapter No.1 Sr.No.2(C)) , Deduction Cost Of Material Old Workable Bricks Etc. All Complete. , Road Delinator Delinealor Supply & Fixing Of M S Delineator Made Of L\Lild Steel With Pllre Polyester Powder Coating With The Minimum Thickness Of Powder Coating Of Not Less Than 40 Micron For Prolectlon Against Corlosion The Surface Should Be Concealed So That There Sholrld Not Be Any Exposed Surface Wilhout Powder Coating. Alternatively, These Metal Guide Poles Can Be Concealed With Thermoplastic Body. The Posts Shall Have Lan Ellipsoidal Or Circular Design Wilh The Height Of The Pole Shall Be 800 To 900 Mm Above The Ground With About 200 To 300 Mm Base Which Can Be Anchored Onto The Ground Mild Steel Guide Poles Shall Conform To Type Xl Sheeting Specifications As Per Lrc67 And Ast Ii D4956 Which Would Ensure To Obtainl Clear Visibility Of The Road Alignment During Nighl Time. The Relro Reflective Sheeting Shall Be Tested For Acertificale Of Having The Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Iiner Removal, Adhesion,Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdooa Weathering And Ils Having Passed These Tests Shall Be Obta Ned From Lnlernational/Government Laboratory / Lnslitute By The Manufacturer Of The Sheeinq And In Case The Cerliflcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condillon Within 3 Years Of Launching Of Product By The Manufaclure In Abroad. Alternatively, A Certillcate Conforming To Astlvl Specification (D4956 09) On Adficial Accelerated Weatherlng Requirements From A Reputed Laboratory In Lndia Can Be Accepted providing Sionally. Ln Such A Siluation, The Employer / Clienl, If So Desires, Collld Seek For A Performance Guarantee Which Would Be Released Alter Receipt Of Certiflcate Meeting The Requ Rement Of Three Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Report Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour. T&P, Transportation, Installation And Incidentals All Complete As Per D Recllon Of The Engineerincharge , Road Marking With Hot Applied Thermoplastic Compound With Reflectrosing Glass Beads On Bituminous Surface. Providing & Laying Of Hot Applied Thermoplastic Compound 2.5Mm Thick Including Reflecto Rising Glass Beads @ 250Gm/Sqm. Area, Thickness Of 2.5Mm Is Exclusive Of Surface Applied Glass, Beads As Per I.R.C. 35. The Finish Surface To Be Level Uniform And Free Form Steaks And Holes Composition Of Thermoplastic Material Shall Be As Per Table 800-3 Of Clause 803 Of Morth Including Cost Of Work As Per Direction E/Ic. (Chapter-28 Si.No.2) , Road Marking With Hot Appliod Ths.Moplastic Compound With Roflsctorlsing Glass Boads On Bituminous Surface. (Ropoated / Tranvers Bar) Providing And Laying Of Hot Applied Thermoplastic Compound 5 Mm Thick Lncludlng Reflectorising Glass Beads 0) 5Oo Gms Per Sqm Area, Thickness Of 5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35-2015 The Llnished Surface To Be Level, Uniform And Free From Streaks And Holes , 6M Span Over Head Cantilever Structure With 300 Dia M S One Vertical Post Supply, Fxing & Erection Of Built Up Canllever Structure 6 M Span Comprising Of One Verllcal Posts Of 6.00 I!4 Helght Made Up Of 300 Mm Nb Heavy Class Ms Pipe As Verllcal Member Welded With 10 Mm I\,4S Plate At Top & 12 Mm M S Plate At Bottom. The Horizontal Truss Shall Comprise Of 50 Mm Dia Heavy Class M.S. Pipe And 40 Mm Dia Heavy M S Pipe As Bracing & 10 Mm Ms Plate At Bottom For Llxing To Vertical Post As Per Structure Design & Drawing Wilh One Of Steel Primer And Two Coats Of Synthetic Enamel Planl. The Work Includes Constrlrction Of Reinforced Cement Concrete Foundation Of Size 0.90X0.90X1 50 M Of Required Depth As Per Site Conditlon For Built Up Structure Including Earlh Work In Excavation 100 Mm Thick Lean Concrete In 113:6 Cement Coarse Sand And 40 Mm Gauge Stone Ballast And Reinforced Cement Concrete M25 Grade Concrete Including Supply And Fixing Of 25 Mm Dia Foundalion Bolts 600 Mm Long As Per Provision Of Structure Design Includlng Cost Of Reinforcemenl & Shuttering. The Lateral Vertical Clearances And Complete. Nstallaton Work Shall Be As Per Relevanl Clauses Of Mort&H Speciflcation Section 8Oo And Irc 67 2012 Complete In All Respect The Raies Shall Include Cost Of Deslgn Fabricalion, Supply, Kansportalion, Local Shifting Erection Of Signage Skucture Using Crane, Inclusive Of All Taxes Etc. All T&P Machine, Malerial And Labour Requiled For Proper Completion Of Work As Per Direclion Of Engineer-Ln-Charge. , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilhout Shank) , Reflective Raised Pavement Markers (Cat Eye/ Road Stud) Supply And Flxing Of Raised Pavement Marker With Made Of Plastic Body Of Rpimi Road Stud Shall Be Moulded From Asa (Acrylic Styrene Acrylonitrile) Or Hips (High-Lmoact Polystyrene) Or Acryloniilrile Butadien Styrene (Abs) Or Any Oiher Suitable Malerial Approved By The Engineer. The Marker Shall Support A Load Of 13,635 Kg Tested In Accordance With Astm D4280.The Reflective Panels Shall Consist Of Number Of Lenses Containing Single Or Dual Prismatic Cubes Capable Of Providing Total Internal Reflection Of The Lighl Entring The Lens Face. Lenses Shall Be Mouled Of Methyl Melhecrylate Conforming Io Astm D78b Of Equivalent The Slop Or Retro-Reflecting Surface Shall Preferably Be 35+1-5 Degree To Base And The Area Of Each Relro _Reflecling Sllrface Shall Not Be Less Than 13.00 Sq.Cm The Marker Height Shall Not Be Less Lhan 10 Mm And Shall Nol Exceed 20 Mm & Width Shall Not Exceed 130 Mm. The Base Of The Marker Shall Be Flal Within 1.3 Mm All Road Studs Shall Be Legibly Marked Wilh The Name , Lrade Or Other Means Of Identification Of The Manufacture. Epoxy Lnslallations, Excess Adhesive Around The Edge Of The Malker, Excess Adheslve On The Pavemenl And Adhesive On The Exposed Surfaces Of The Markers Shall Be Immedialely Removed. The Contractor Shall Submit A Two Year Warranty For Sal Sfactory Lleld Peformance Including Stipulated Retro-Refleclance Of The Reflecting Panel , To The Engineer . Ln Addition A Two Year Warranty For Salisfactory Infield Perfonnance Of The Finished Road Marker Shall Also Be Given By Lhe Conlractor Who Carries Out The Work Of Fixing Of Reflective Road Ma*Ers. Ln Case The Markers Are Displaced , Damaged . Gel Worn Out Or Lose Their Reflectivity Compared Lo Stipulated Standards , The Contractor Would Be Reqlllred To Replace Allsuch Markers Within 15 Days Ofthe Inlimation From The Engineer. At His Own Cost The Rate Shall Include All Materlals, Labour, T&P, Transportalion, Insiallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. Rpm (Wilh Shank) , Flexible Median Marksr As Per Irc 79:2019: Flexible Lmedian N4arker (Flv4nl) Should Be Used For Improving Medlan Visib Lity Dlrring Dark Hours. , Use Of L/Edian ]Varker Provides Safely Againsl Colision Happening Wilh Med Ans During N Ght Lime , Or Sevete Weather Flexib E L\.4Edian Markers Shall Be Provided With Fluorescenl Yellow Colour Retro-Refleci Ve Sheeting Type Xl As Per Irc:87. Flexible Lt4edian Lmarker Shall Be Ol Lough, High Impact Resistant, Lnieclion Molded, Lhermoplastic Body With Propery Of Flexibility Io Provide High Durabilityand U Shape Structure Having Rebound / Bollnce Back Properly. The Sheeting Shall Be Of Type Xl Conforming To Lrcl67 And Ii Should Be On Both The Faces Whereby Providing Maximum Refleclivity At L,Anger Distances With Adequate Durabllity. The Logo Of The Manufacturer Shall Be Embossed On Either Side Of The Body During The Lnjection Molding Process. Fi\4M Shall Be Fixed By A Combination Bf Epoxy Adhesive And Grouting/ Drilling On Concrete Medians Or Property Conslructed Solid Medians Heighl: The Marker Height Shall Be A Minimum Of 180 Mm Width 120 Mm & Body Thickness: 6.5 Mm. The Shanks Shall Not Be Less Lhan 20 Mm And Depth Shall Not Be Less Than 30 Mm Reflective Area: Shall Not Be Less Than G0 Cm Square . Proof Of Lhe Same Report Shall Be Uploaded Which Quollng Lender. The Body Of Fn,4[,4 Shall Bounce Back To Ils Origlnal Position Of Afier 750 Number Of Hits Using Pendulum Of 1.8 Kg Conforming 40 Astm D256 Adhesion Between The Body And Outer Casing Body Of Fmi\4 Shall With Stand 50 Kg I Tensile Loads Conforming To Astm D63b Method. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer-Ln-Charge. , Painting Lines, Dashes, Arrows, Etc. On Roads Ln Two Coats On New Work Painting Lines, Dashes, Arows, Etc On Roads In Two Coats On New Work Wilh Ready Mixed Road Marking Paint Cinforming To Ls:164 On Bituminolls Surface, Including Cleaning The Sullace Of At Dirt, Dusi And Other Fore Gn Matte., Demarcation At Site And Trafllc Control . Over 10 Cm. In Width , Linear Dstinoator Systsm (Lds) Supply & Fixing Of Linear Delineator System (Lds) Panels Made Of Micro Prismatic Retro Reflective Sheeting Type Xl Duly Laminated On Thin Aluminium Foil To A Unique Corrugated Shape To Provide Retro Reflection Across Wide Range Of Observaiions And External Angles. Eatch Lds Panel Should Be Of Nominal Lenglh Of 33 Inch And Each Ridge Shall Be Approximately 0.34 Inch High Each Lds Panel Is To Be Firmly Fixed On Existing Concrete/Brick Work With 16 Nos Fastner/ Screw , Retro-Roflectivesheeting Type-Lv With 4 Mm Thick Acm Single Side Providing & Flxing Of Reflective Signs With A Corrosion Resistant 4 Mm Thick Wlth 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Lace To Be Iully Covered With Hlgh Lntenslty Prlsmatic Sheetlng Type Lv As Per Irc-6712012 Relro Refleclive Sheeling With Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Elc Shollld Be As Per Morth Speciflcation No Bo1.3.7 .The Sheelng Shall Have A Pressure - Sensltive Adhesive Of The Aggressive - Tack Type Requiring No Heat , Solvent Other Preparation For Adhesion 10 A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acim (Aluminium Composite Materials) Shall Be Flxed On The Back Frame Nis Angle Wiih Riveting. Micro Prismalic Type Lv Retro Rellective Sheeting Conilrming 1O Astm 04956-09 Shall Be Pressure Lixed. The Retro Reflective Sheeting Shall Be Tested For A Cerlillcate Of Having The Sheeting Tesled For Coetllcient Of Retro Refleclion, Dayume Colour And Luminance, Shrinkage, Flexibilily, Liner Iemoval, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed Lhese Lesls Shall Be Obtained From Lnlemational/Government Laboratory/ Lnstitute By The Manufacture. Of The Sheetng And In Case The Certiflcate Is Oblalned From International Condilion, T Should Also Be Obtained From Lndian Condilion Within 3 Years Of Launching Of Producl By The Manufactllre In Abroad. Alternalively, A Cerliilcate Conforming To Astm Specification (D 4956-09) On Artiilcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, Lhe Employer/Client, If So Desires, Could Seek For A Petlotrnance Guarantee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirement Of Lhree Years Outdoor Wealhering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo.T Shall Be Uploaded Whlch Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Lransportation, Installation And Lncidentals All Complete As Per Direction Of The Eng Neer-In-Charge. , Retro-Reflectivesheeting Type Iv With 4 Mm Thjck Acm Double Side: Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Lhlck With 0.4 To 0.5 Mm Both Side Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Tntensity Prismaiic Sheeling Type Lv As Per Irc-67:2012 Retro Reflective Sheeting With Back Frame Ms Angle Of 35X35x5 Mm Legends Letters , Numerals And Borders Elc Should Be As Per Morth Specification No801.3.7 The Sheeting Shall Have A Pressure - Sensitive Adhesive Of The Aggressive - Tack Type Requiring No Heai, Solvent Olher Preparation For Adhesion To A Smooth Clean Surface, Ln A Manner Recommended By The Sheeling Manufacturer. The Acn,4 (Aluminium Cornposite L\,4Aterials) Shall Be Ilxed On The Back Frame Ms Angle With Nveling. Micro Prismatic Type Lv Retro Refleclive Sheeting Conflrming Io Astm D4956-09 Shall Be Pressure Llxed. The Reko Reflective Sheeling Shall Be Tesled For A Cedificate Of Having The Sheeting Tested For Coemcient Oi Reko Reflection, Daytime Colour And Luminance, Shrinkage Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resislance, 3 Years Outdoor Weatherlng And Its Having Passed These Tests Shall Be Obtained From Lnternallonal/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeting And In Case The Certificale Is Oblained From International Condition It Should Also Be Obta Ned From Lndian Condilion Wilhin 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certilicate Conforming 10 Astm Speciflcatlon (0 4958-09) On Aatiflclal Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepled Provisionally. Ln Sllch A Situation, The Employer/Client If So Desires, Could Seek For A Performance Guarantee Which Would Be Released Afler Receipl Of Cerlillcate Meeting The Requirement Of Lhree Years Outdoor Weathering Of The Sheeling As Per Irc 67I2012 & Proof Of The Same Repofl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installalion And Incidentals All Cornplete As Per Dlreclion Of The Engineer-In-Charge , Retro-Refle.Ctivesheeting Type-Xl With 4 Mm Thick Acm Single Side Providing & Fixing Of Reflective Signs Wilh A Corrosion Resistant 4 Mm Thick With 0.4 To 0.5 Mm Both Slde Aluminium Skin Alumlnium Composite Panel Face To Be Fully Covered With High Lntensity Prismatlc Sheeting Type Lv As Pet Irc-67:2012 Reko Reflective Sheeling With Back Frame L\,4S Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per L\Lorth Specification No_ 801.3.7 The Sheeting Shal Have A Pressure - Sensitive Adhesive Of The Aggressive Tack Type Requiring No Heal Solvent Other Preparation For Adhesion To A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer. The Acm (Alllminium Composite L\,4Aterlals) Shall Be Fixed On The Back Frame Ms Angle With Riveting. Micro Prismatic Type Lv Retro Reflective Sheeung Conflrming To Astlvl D4956-09 Shall Be Pressure Fixed. The Relro Reflective Sheeting Shall Be Tested For A Cefiilicate Of Having The Sheeting Tested For Coeificient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Iungus Resistance. 3 Years Outdoor Weathering And Lts Having Passed These Tests Shall Be Obtained From Lnlernational/Government Laboraiory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cefiificate Ls Obtained From Lnternational Condition. It Should Also Be Oblalned From Lndian Condition Wilhin 3 Years Of Launching Of Producl By The Manufacture In Abroad. Alternatively, A Certificate Conforming To Astii Speciflcation (D 4S5b-09) On Adiflcial Accelerated Weathering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Prcvisionally. Ln Such A Siluation, The Employer/Client, If So Desires, Could Seek For A Performance Guaranlee Which Would Be Released After Receipt Of Certiflcate Meeting The Requirernent Of Three Years Outdoor Weathering Of Lhe Sheeting As Per Irc 67:2012 & Prooi Of The Same Reporl Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpoftalion, Installation And Incldentals All Complete As Per Direction Oi The Engineer-Ln-Charge , Retro-Reflectlveshoeting Type-Xl With 4 Mm Thick Acm Double Side Providing & Rlxing Of Reflective Signs With A Colrosion Resistanl 4 Mm Thick With 0.4 To 0.5 Mm Both Side Aluminium Skin Aluminium Composite Panel Face Lo Be Iully Covered With High Lntensity Prismatic Sheeling Type Lv As Per Irc-67:2012 Relro Retlective Sheeting Wlth Back Frame Ms Angle Of 35X35x5 Mm. Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specification No_ Bo1.3.7 .The Sheeting Shall Have A Pressure - Sensilive Adhesive Of The Aggressive - Tack Type Requiring No Heat, Solvent Other Preparation For Adhesion Lo A Smooth Clean Surface, In A Manner Recommended By The Sheeting Manufacturer, The Acn,4 (Aluminlum Composite Materlals) Shall Be Fixed On The Back Fiame Ms Angle With Riveting. Micro Prismalic Type Lv Retro Reflective Sheeting Conflrming To Astm D4956 09 Shall Be Pressure Fixed. The Relro Refleclive Sheeting Shall Be Tested For A Ce(Iilcate Of Having The Sheeting Tested For Coefllcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Funqus Resistance. 3 Years Outdoor Weathering And Its Having Passed These Tests Shal Be Oblained From Lnternationa /Governmenl Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case Lhe Certillcate Ls Obtained From Internalional Condition, It Should Also Be Obtained From Lndian Condition Within 3 Years Of Launching Of Product By The Manufacture In Abroad Alternalively, A Ce(Iilcate Conforming To Astm Specification (D 4956-09) On Artiflcial Accelerated Wealhering Requirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Sltuation, The Employer/Cllent, If So Deslres Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cedillcate Meeling The Requirement Of Lhree Years Outdoor Weathering Of The Sheeting As Per Irc 67:2012 & Proof Of The Same Repo( Shall Be Uploaded Which Quoting Tender. The Rate Shall Include All Materials, Labour, T&P, Transpo.Tation, Installation And Incidentals All Complete As Per Direction Of The Engineer-In-Charge , Bollard (Single Sido) Supply & Fixing Of Bollard Made(Single Side) Out Of2mm Thick Aluminium Sheet Face Lo Be Covered With High Intensity Prismatic Grade Type Lv Sheeting , Legends , Letters , Numerals And Borders Etc Should Be As Per Morth Specillcation No-801.3.7 . Welded Poly Shaped To Make It Monolithic Pillar Size 12Oo Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Is Fully Cover (Size Of Foundation 0.45X0.45X0.60M) , Bollard (Doublo Side) Supply 8, Fixing Of Bollad Made (Double Side) Out Of 2Mm Thick Aluminium Sheet Face To Be Covered With High Intensity Prismatic Grade Iype Lv Sheeting Legends , Letters , Numerals And Borders Etc Should Be As Per Morih Specification No-801.3.7. Welded Poly Shaped To Make It Monolithic Pillar Size 1200 Mm High Bollard Is Having A Frame 900X600 Mm And 600 Mm Dia For Fixation Made Out Of 35 X 35 X 5 Mm Angle Iron And From Side Ls Fully Cover. (Size Of Foundalion 0.45X0.45X0.60M) , Solar Power Road Marker (Solar Studs) The Solar Studs Shalt Be Made Of Aluminium Alloy And Poly Carbonate Material Which Shall Be Absolutely Weather Resistant And Strong Enough To Support A Load Of 13,635 Kg Tested In Accordance With Ast[4 D4280. Lts Co]Our May Be While . Red , Yellow , Green Or Blue Or Combination As Directed By The Engineer . Its Water Resislance Shall Meet Lhe Requiremenls Of Lp 65 In Accordance Wilh 15:12063:1987 Category 2 For Protection Againsl Water Ingress The Dimensions Of Solar Sluds Shall Not Be Less Than 100 Mm X 100 Mm X 10 Mm Ltshall Have Super Bright Leds So As To Provide Long Visibillty From A Distance Of More Than B0o M. Lts Flashing Rate Shall Not Be Less Than1 Hz Lts Should Be Able To Glve The Prescribed Performance In The Temperrature Range Of - 40C To +55C Lts Life Shall Be Not Less Than 3 Years. The Rate Shall Include All Materials, Labour, Equipments, Fabrication, Transportation, Erecuon, Installation And Incidentals All Complete As Per Direclion Of The Englneer-In-Charge , Cast-Ln-Situ Cement Concreto M 20 Kerb Construction Of Cement Concrete Kerb With Top And Bottom Width 115 And 165 Mm Respectively, 250 Mm High In M 20 Grade Plain Cement Concrete On M-10 Grade Foundation 150 Mm Thick, Foundation Having 50 Mm Projection Beyond Kerb Stone, Kerb Stone Laid With Kerb Laying Machine, Foundation Concrete Tad Manually, Alt Complete As Per Clause 408. , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 90 Cm Equllateral Tringle With Dif,Lnitation Plate Size (20Cm X 60Cm , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Eqlrilateral Trinqle With Difflnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm Circular With Difflnltation Plale (20Cm X 60Cm) . , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government B0 Mm X 60 Mm Reclangu annual repair With Difllnitation Plate (20Cm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Mm X 45 Mm Rectangular With Difllnitation Plale (2Ocm X 60Cm) , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 60 Cm X 60 Cm Square With Difflnitation Plate (20Cm X 60Crn) , Direction And Place Identification Signs Up To 0.90 Sqm Size Board Providing And Erecting Directlon And Place Identification Retro Reflectorised S Gn As Per Irc-67 Made Of High Intensily G.Ade Sheeting The Relro Reflective Sheelng Shall Be Tested For A Certiicate Of Having The Sheeling Tested For Coefficient Of Reko Reflection. Daytime Colour And Luminance, Shrinkage, Flexibllity. Liner Removal Adhesion, Impacl Resislance, Specula. Gloss And Iungus Resistance, 3 Years Ouldoor Weathering And Its Having Passed These Tesls Shall Be Obtalned From Lnternational/Govemment Laboraiory/ Lnslitule By The Manufacturer Of The Sheeting And In Case The Certillcate Is Obtained From International Condition, It Should Also Be Obtained From Lndian Condltion Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternatively, A Certiflcate Confonning To Ast[4 Specification (D4956 09) On Art Ficial Ccelerated Wealhering Requirements Faom A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer I Client, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Lhree Years Olrtdoor Weathering Of Lhe Sheeting As Per Irc 67 2012. Legends , Letters , Nurrerals And Borders Etc Should Be As Per Imorth Speciilcation No-801.3.7 Sheet Fixed Over Aluminium Sheetinq .2 Mm Thick Wilh Area Not Exceeding 0.9 Sqm.Supported On A Mild Steel Single Angle Iron Post 75X75x6 Mm Flrmly Fixed Lo The Ground By Rneans Of Property Designed Foundalion With N,4-15 Grade Cement Concrete 45X45x60 Cm.,Below Ground Lcvcl As Pcr Approvcd D.Awing. Complete. , Tree Plats Supply & Fixing Of Retro Reflective Tree Plate Having Size 15Cm X15cm, Conjisiing Type Xl Retro Reflective Sheeting Lixed Over 1.50 Mm Thick Aluminiu; Sh;Et Including Labour, Material T&P Etc For Proper Completion Of The Work. The Rate Shall Include All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Of The Engineer-Incharge. , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 1000 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 750 Mm Helght , Traffic Cone Traffice Cone: Supply Of Red Fluorescent Wilh With Refleclive Sleeve Trafflc Cone A Squre Base Of 300 To 500 Mm & Thickness 35 Mm And A Heiht Of 1000 Mm To 500 Mm. Thay Shall Be Brilliant Red / Orange / Yellow And Shall Be Made Of Ldpe Material Ihat Can Be Struck Without Causing Damage Lo Lmpacting Vehicles. Retro-Reflect Orization Of Cone Shall Be Provided By A 150 Mm Wide While Band Located 75 Lo 100 Mm Irom The Top Of The Cone And Additional 100 Mm Wide White Band Located Approximately 50 Mm Below The 150 Mm Band The Rate Shallinclude All Materials, Labour, T&P, Transportation, Lnstallation And Incidentals All Complete As Per Direction Ofthe Engineer-In-Charge. 500 Mm Helght , Aluminum-Backed Flexible Prismatic Sheeting Shall Be Made Of Yellow Colored Flexible Prismallc Sheeting With Non-Rnetallic Prismatc Lens Formed In A Lransparent, Synthelic Resin As Retro Leflective Elements. This Llexible Prlsmatic Sheeting Shall Have Black And Yellow Stripes With Aluminum Backed Flexible Prismatic Type Vl Sheeting Conforming To Astm: D4956 . Specifications And Standards Of Coefllcient Of Relro Refleclivity, Flexibility And Lmpact Resislance Applicable For Reboundable Devices This Flexible Prismatic Sheeting Shall Have Screen Printed Arrow/Slant Line Pattern In Black Colour In A Continuous Roll Format. Wldlh Of Object Marker Shall Be 300 Mm. The Rate Shall Include All Materials, Labour, T&P, Transportation, Installation And Incidentals All Complete As Per Direclion Of The Engineer In-Charge , 2.40 M Span Over Head Cantilever Structure With 150 Die Ms One Vertical Post (Double Side Retro Reflective Sign Boards) Supply, Fixing & Eraction Of Built Up Cantilever Structure 240 M Span O.PiiIng Oi One Ve.Tical Posts Of 7 30 N4 Heighl Made Up Of 150 Mm Nb Medium Class T\4S Pipe As Vertical Memberwelded With 10 Mm Ms Plate At Top & Lo Mm Lvls Plate At Boltom. Flxing To Vertical Post As Per Structllre Design & Drawing Wiih One Of Steel Primer And Two Coats Of Synthetic Enamel Plant And The R;Tro Reflective Sheetinq Shall Be Tesled For A Certifcale Of Having The Sheeting Tested Fo. Coemcient Of Retro Reflection, Daylime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Resistance, 3 Years Olltdoor Wealhering And Ils Having Passed These Lests Shall Be Obtained From Lnternational/Government Laboraiory/ Lnstitute By The Manufactllrer Of The Sheeting And In Case The Certificate Is Obtained From Internatlonal Condilion, It Should Also Be Obtained From Lndian Condition Wilhin 3 Years Of Launchlng Of Product By The Manufacture In Abroad. Alternatively, A Cedificate Confonning Io Astm Speciflcation (0 4956 09) On Artificial Accelerated Weathering Reqllirements From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. N Such A Sltuation, The Employer / Client, If So Desiaes. Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerllllcate Meeting The Requirement Of Three Years Outdoor Weathering Ol Lne Sheeling As Pel Irc 67 2012 . Legenos . ,Etters . Numerdls And Borders Elc Sholllo Be Asperl\,4Orlh Specif,Calion No_801 37 The Work Includes Construction Of Reinforced Cement Concrete Foundation Of Size 0.60X0.60X1.20 M Of Required Depth As Per Site Condilion For Built Up Struclure Lncluding Earth Work In Excavation 100 Mm Thick Lean Concrete Ln 1:3:6 Cemenl Coarse Sand And 40 Mm Gauge Stone Ballast. Reinforced Cement Concrete Lm25 Includlng Supply And Fixing Of 25 Mm Dla Foundalion Bolts 600 Mm Long As Per Provision Of Slructure Design Including Cost Ot Reinforcement & Shuttering. The Lateral Vertical Clearances And Complete. Lnstallation Work Shall Be As Per Relevant Clauses Of Mort&H Specitlcation Seclion 800 And Irc 67 2012 Complete In A I Respect The Rates Shall Inclucle Cosl Ol Design Fabrication, Supply, Lransporlalion, Local Shifling Erection Of Signage Slructure Using Crane, Incluslve Of All Taxes Etc All T&P Machine, Material And Labout Required For Proper Completion Of Work As Per Direction Of Engineer-In-Charge , Retro-Reflectorised Traffic Sign As Per Irc-87-2012 Providing And Flxing Of Retro-Reflectorised Caulionary, Mandalory And Informalory Sign As Per Irc 167-2012 Made Of High Intensily Grade Sheeting Type Lv Vide Clause 801.3, Fixed Over Aluminium Sheeting 15 Mm Thick Supported On A Mild Steel Angle Iron Post 75 Mm X 75 Mm X 6 Mm Ilrmly Fixed To The Ground By Means Of Properly Designed Foundation With M 15 Grade Cement Concrete 45 Cm X 45 Cm X 60 Cm. 60 Cm Below Ground Level As Per Approved Drawing. The Retro Reflective Sheeting Shall Be Lested For A Cerliilcate Of Having The Sheeling Tested For Coetflcient Of Retro Reflection, Daytime Colour And Luminance, Shrinkage, Flexibility, Liner Removal, Adhesion, Impact Resistance, Specular Gloss And Flrngus Resistance 3 Years Outdoor Weatherrng Anci Ils Having Passed Lhese Lesls Shall Be Obtained From Lnternational/ Government Laboratory/ Lnstitute By The Manufacturer Of The Sheeting And In Case The Cerlillcate Is Obtained From Lnternatlonal Condition, It Should Also Be Obtained From Lndian Condiuon Within 3 Years Of Launching Of Product By The Manufacture In Abroad. Alternalively, A Certiflcate Conforming To Asti\,4 Specillcation (0 4956-09) On Artiflcial Accelerated Weathering Requirements From A Reputed Labo.Atory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Client, If So Deskes, Could Seek For A Peformance Guarantee Which Would Be Released After Receipt Of Cerlificate Meeting The Requirement Of Three Years Olrtdoor Weathering Of The Sheeting As Per Irc 67.2012. Legends,Lellers, Numerals And Borde.S Etc Should Be As Per Aiorth Speciflcation No-801.3.7 . Proof Of The Same In Form Of Government 30X90 Cm (Lefrright) Object Hazard , Retro Rellectorisod Signs (Stajnless Steel Frame And Post With One Side Sings) Supply & Fixing Of Reflective Sign Board (Single Side) Of Size 1.50X1.20 M Retro Refleclive Sheeling Of Hip Grade Type-Lv, Lhe Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick, Acm Sheel Of Standard Make As Per Morth Specificaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Cm Cement Conclete Foundauon. The Stainless Steeljoint Welding Of Ss Pipe Work Shall Be Band And Grinder Property Including Bufflng So An To Give Uniiorm Shining At Weded Joinls. The Retro Reflective Sheellng Shall Be Lested For A Certiflcate Of Having Ihe Sheeting Tested For Coefficienl Of Retro Reflection, Daytime Cololrr And Luminance, Shrinkage, Flexibility, Linet Removal, Adheslon, Impact Resistance, Specular Qloss And Fungus Resistance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Governmenl Laboratory/ Institute By Lhe Manufacturer Of The Sheeting And Ln Case The Cedillcate Is Obtained From Inlernational Condition, It Should Also Be Oblained From Lndian Condition Within 3 Years Of Launching Of Procluct By The Manufacture In Abroad Allernatively. A Certiflcate Confolrnlng To Astm Specilicalion (D 4956-09) On Artiflcial Acceleraled Weathenng Requirements From A Reputed Laboratory Ln Lndia Can Be Accepled Provislonally. Ln Slrch A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificale Meeting The Requirement Of Three Years Ouldoor Weathering Of The Sheeting As Per Irc 67I2012. Legends , Letters , Numerals And Borders Elc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Governmenl Repod Shall Be Uploaded While Quoting Tender. , Retro Reflectorised Signs (Stainless Steel Frame And Post With Both Side Sings) Slrpply & Fixing Of Reflecllve Sign Board (Sing E Side) Of Size 1.50X1.20 M Retro Reflective Sheeting Of Hip Grade Type-Lv, The Board Shall Be Fixed On 50Mm Ss 304 Grade Pipe And Refleclive Sheet On 4 Mm Thick Acni Sheet Of Standard Make As Per Morth Speciilcaton. The Board Shall Be Fixed Using 2 Man Post 45X45x60 Crn Cement Concrele Foundation The Stainless Steelioint Welding Of Ss Pipe Work Shallbe Band And Grinder Propefiy Including Butting So An To Give Uniform Shining At Weded Joints. The Relro Reflective Sheeting Sha I Be Tested For A Certificale Of Having The Sheeling Tested For Coefficient Of Retro Reflection Daytime Colour And Luminance, Shrinkage. Flexibiity, Llner Removal, Adhesion, Impact Resistance, Specular Gloss And Fungus Reslstance, 3 Years Outdoor Weathering And Its Having Passed These Tests Shall Be Obtained From Lnternational/Government Laboratory/ Lnstitute By Lhe Manufacturer Of Lhe Sheeling And Ln Case The Certiflcate Is Obtained Lrom Lnternational Condition, It Should Also Be Obtained From Lndian Condition Wlthin 3 Years Of Launching Of Product By The Manufacture In Abroad. Allernatively, A Cerlificate Conforming To Astm Specificalion (0 4956.09) On Artificial Accelerated Weathering Requlremenls From A Reputed Laboratory In Lndia Can Be Accepted Provisionally. Ln Such A Situation, The Employer / Clienl, If So Desires, Could Seek For A Performance Guarantee Which Would Be Released After Receipt Of Certificate Meeting The Requirement Of Three Years Outdoor Weather Ng Of The Sheeting As Per Irc 67I2012. Legends. Letters, Numerals And Borders Etc Should Be As Per Morth Specification No-801.3.7 . Proof Of The Same In Form Of Government Report Shall Be Uploaded Whlle Quoting Lender. , Type - A, W : Metal Beam Crash Barrier Providing And Erecting A W Metal Beam Crash Barrler Comprlsing Of 3 Mm Lhick Coffugated Sheet Melal Beam Ral 70 Cm Above Road/Ground Level Flxed On Ismc Series Channel Vertical Posl, 150 X 75 X 5 Mm Spaced 2 M Centre To Centre, 1.8 M High. 1.1 M Below Grolnd/Road Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fltlings To Conform To Lsi1367 And 15:1364. Metal Beam Rail To Be Fixed On The Vedical Post With A Spacer Of Channel Section 150 X 75 X 5 Mm, 330 Mm Long Complete As Per Clause 810 , Type - B, Thrie : Metal Beam Crash Barrier Providing And Erecting A Thrie Metal Beam Crash Barrier Comprising Of 3 Mm Thick Corrugated Sheet Melal Beam Rail,85 Cm Above Road/Ground Level, Fixed On Isi\Ic Series Channel Vertical Post, 150 X 75 X 5 Mm Spaced 2 M Cenlre To Cenke, 2 M High With 1.15 M Below Ground Level, All Steel Parts And Fltments To Be Galvanised By Hot Dip Process, All Fittings To Conform Lo Lsl1367 And Ls:1364 Metal Beam Rail 10 Be Fixed On The Verlical Post With A Space Of Channel Seclion 150 X 75 X 5 Mm, 546 Mm Long Complete As Per Clause 810 , Anti-Termite Treatment The Soil Along With External Perimeter Of Building At The Rate Of 2.5 Litres Of Emulsion Per Square Metre Of The Perimeter Wall {Chapter No.08 Si.No.5} , Anti-Termite Treatment Of The Bottom And Sides Of Excavation At The Rate Of 5Litres Of Emulsion Per Square Metre Of Surface Area {Chapter No.08 Si.No.1} , Anti-Termite Treatment Of The Top Surface Of Filled Earth At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface{Chapter No.08 Si.No.3} , Anti-Termite Treatment Of The Soil Under Plinth Protection At The Rate Of 5 Litres Of Emulsion Per Square Metre Of Surface {Chapter No.08 Si.No.4} , Anti-Termite Treatment Of The Backfill In Contact With Foundation At The Rate Of 7.5 Litres Of Emulsion Per Square Metre Of Vertical Surface (Area Of The Sub Structure In Contact With Backfill To Be Measured) {Chapter No.08 Si.No.2} , Treatment Of Existing Masonry Using Chemical Emulsion @ One Litre Per Hole At 300 Mm Interval Including Drilling Holes At 45 Degree And Plugging Them With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To The Full Depth Of The Hole : With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration {Chapter No.08 Si.No.6-2.35.4.1} , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration {Chapter No.08 Si.No.6-2.35.3.1} , Providing And Stacking 22.40-53Mm Guage Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Etc All Complete.(Ns) , Supply And Laying Stone Dust Etc All Complete. , Consolidation/Compaction Of Stone Ballast 10Cm Thick (Loose) Coat Including Repairing Of Patches Picking Up To Old Surface Spreading, Ballast Making Medhies To Retain Water And Carriage Of Metal Upto 30M Carriage Of Water Upto 200M Maintenance Of Barriers And All Labour T&P Including Road Roller Charges Etc. Required For Proper Completion Of Work The Stone Ballast Is To Be Supplied To The Contractor Free Of Cost At Site. , Scarifying The Existing Bituminous Road Surface To A Depth Of 150 Mm And Disposal Of Scarified Material With A Lift Upto 3 M And Lead Upto 1000 M As Per Technical Specification Clause 301.4 {Chapter No.20 Si No.16} , Providing And Applying Primer Coat With Ss1 Grade Bitumen Emulsion On Prepared Surface Of Granular Base Including Clearing Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means. (As Per Attached Analysis) , Providing And Laying Dense Graded Bituminous Macadam With Higher Capacity Batch Type Hmp Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder @ 4.5 Per Cent By Weight Of Total Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification Clause No. 505 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , Providing & Applying Tack Coat With Bitumen Vg-10 Using Bitumen Pressure Distributor At The Rate Of 0.30Kg/Sqm. On The Prepared Primed Granular/Old Painted Surface. Cleaned With Air Compressor. Including All Taxes, Material, Labour, T&P Etc Required For Proper Completion Of The Work. (For Bituminous Surface). (Chapter No.20 Si No.9) , Providing And Laying Bituminous Concrete (Grading-Ii) With 100-120 Tph Hot Mix Plant Producing An Average Output Of 75 Tonnes Per Hour Using Crushed Aggregates Of Specified Grading, Premixed With Bituminous Binder Vg-30 As Per Approved Job Mix Formula Which Ever Is Higher Of Mix And Filler, Transporting The Hot Mix To Work Site, Laying With A Hydrostatic Paver Finisher With Sensor Control To The Required Grade, Level And Alignment, Rolling With Smooth Wheeled, Vibratory And Tandem Rollers To Achieve The Desired Compaction As Per Morth Specification 5Th Revision Clause No. 509 Complete In All Respects Including Cost Of All Materials, T&P, Labour, Cartage For Proper Completion Of Work As Per Direction Of Enginee-In-Charges. (20-Chapter Analysis Rate) , S/L/J Of 20Mm Dia Pvc Cunduct Pipe Etc. All Complete. , Making Of Nala Bandha With Sand Bags. With Local Sand Including Etc. All Complete. (Atached Per Annalysis Rate). , Providing Of Nala Bandha For Diversion Of Nala Etc All Complete.(Ns) , Scraping Of Max Phalt Road Including Disposal Of All Scraped Material To A Distance Of 30Mtrs (100 Ft) As Directed By Engineer-In-Charge C.P. & T&P.Etc. All Complete. {Chapter No.20 Si No. 772(A)} , Dismentling Existing Damage Plaster Including Disposal Of Refuse As Directed By E/Ic With In A Distance Of 60 Meters Etc. All Complete. {Chapter No. 17 S.I. No.16 (706)} , Supply And Fixing Of Light Fitting Switch Board. (None Sheduled) , Fixing Of Gate, Grill And Jali Etc. All Complete. (None Scheduled) , Supply & Fixing Of Wiring Sub Main. , Supply & Fixing Of Plug Point 15Mm. , Supply And Fixing Oxided Iron Fitting Etc. All Complete (None Scheduled) , Supply/Fixing Of 16 Mm Pvc Pipe Adopter Suitable For Item No. , Supply/Fixing Of 20 Mm Cvc Pipe Adopter Suitable For Item No. , Supply & Fixing Of 27Watt. Cfl Etc. All Complete. , Supply And Fixing Cat Eye Including Supply Of All Material, Loabour, T&P Etc. All Complete. (Chapter No.28 Si.No.5B) , Supply And Fixing Wiring Of Light Point. (None Sheduled) , Making Connection Of Drain Of Sewer Line With Existing Man Hole Including Breaking Into And Making Good The Walls, Floors With Cement Concrete 1:2:4 Cement Plastered On Both Side With Cement Mortar 1:3 Finished With A Floating Coat Of Neat Cement And Making Necessary Channels With Cement Concrete 1:2:4 For The Drain Etc. All Complete. (Chapter No.25 Si.No.9) , Cement Concrete Flooring 1:2:4 ( 1 Cement : 2 Course Sand : 4 Graded Stone Of Size 20 Mm Nominal Size) Laid In One Layer Finished With A Floating Coat Of Neat Cement (40 Mm Thick Floor). (Si No. 665), Nbo 14.71) , Providing And Fixing Of Foot Steps Etc All Complete. (Ns) On Market Rate , Providlng And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Ls:8931.15 Mm Nominal Bore , Supply & Fixing Of C.P. Brass Stop Cock (Conceled) Of Standerd Design Of Approve Quality Etc. All Complete. (Chapter No.21 Si.No.44) , Providing And Fixing Close Timbering In Trenches On Both Side & All Complete. (A) 0.00 To 3.00 M. (None Scheduled) , Providing And Fixing C.P. Brass Stop Cock (Concealed) Of Standard Design And Of Approved Make Conforming To Ls:8931..15 Mm Nominal Bore , Fixing Window Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Ls Standards And Weighing Not Less Than 690 Qms.15 Mm Nominal Bore , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 75Mm Diameter. (Chapter No.23 Si.No. 32(Ii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 110Mm Diameter. (Chapter No.23 Si.No. 32(Iii)) , Providing And Fixing Pvc Pipe Conforming To Isi Make Working Pressure 6 Kg/Cm Including Testing Labour T&P Etc. All Complete. 140Mm Diameter. (Chapter No.23 Si.No. 32(Iv)) , Rectangular Shape 1500X450 Mm Mirror With Plastic Moulded Frame. (Chapter No.22 Si.No.77) , Making Ornamental 2D Painting With Special Design Make By Specialist Painter Laying Of Two Coat Birla White Putty And Design By Asian Paint Including All Material Etc. All Complete. (Nn Approved) , Providing Of 8Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Fixing Door Chowkhats In Existing Opening Including Embedding Chowkhats In Floors Or Walls Cutting Masonry For Holdfasts, Embedding Hold Fasts In Cement Concrete Blocks Of Size 15X10x10 Cm With Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 20 Mm Nominal Size), Painting Two Coats Of Approved Wood Preservative To Sides Of Chowkhats And Making Good The Damages To Walls And Floors As Required Complete, Including Disposal Of Rubbish To The Dumping Ground, All Complete As Per Direction Of Engineer-In- Charge. (Chapter No.9 Si.No.7A-14.2.1) , Supply And Fixing 6Mm (1/4) Thick Chine White Glazed Tiles In Flooring Or Dado Laid With 1:3 Cement And Approved Coarse Sand Mortar And Approved Coarse Sand Mortar Finished With White Cement Jointed And Polishing Complete Including Supply Of All Materials, Labor For Porper Completion Of The Work. (Chapter No.14 S.I. No. 628) , Supply & Fixing Of Pre-Cast M-30 Cement Concrete Grass Paver (Rubber Molded Coloured) Over 40Mm Thick Local Sand Bed, With 3Mm Thick Joints Filled With Local Sand Including Leveling, Tempering And Sweeping Etc., Interlocking Bricks Will Be As Description Given In Direction Issued By The Ircsc-03-2004 And Should Be Isi Marked All Complete. 80Mm Thick, Strength Should Not Less Than M-30. (Tiles I Shape Decided By Engineer-In-Charge With Isi Mark) {Chapter No.20 Si.No.17F) , Repairing Of Leakage And Damege Pipe Line Etc All Complete.(Ns) , Lettering & Painting Of Wall Etc. All Complete. , Red Sand Stone Work For Wall Lining Etc. (Veneer Work) 30Mm Thick In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Camping Jointing In White Cemnet Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching Complete. (Chapter No.18 Si.No.1 New) , Providing And Fixing White Vitreous China Wash Basin Size 630X450mm With Pair Of 15Mm C.P. Brass Pillar Taps Including Etc. All Complete. (Chapter No.24 S.I. No. 3(A)) , Cleaning Of The Site For Workable Etc. All Complete. (Non Scheduled) , Providing Of 32Hp Desel Pump Set For Dewatering Including Hire And Fuel Charge With Operator Etc. All Complete. (None Scheduled) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 1200X600x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 600X450x150mm Etc All Complete. (As Per Market Rate) , Supply Of Pre-Cast Reinforced Cement Concrete Slab Size 900X450x100mm Etc All Complete. (As Per Market Rate) , Fixing Of Reinforced Cement Concrete Slab Etc All Complete. (Ns) , Raising & Re-Fixing Of Manhole Including All Material Labor T&P Etc. All Complete. (Non Scheduled) , Supply & Fixing Reinforced Cement Concrete Menhole Cover Heavy Duty Size Etc. All Complete. (Non Scheduled) , Providing Laying Spreeding And Compacting 45-90Mm Stone Agreegate For W.M.M. Specification Etc. All Complete. (None Scheduled) , Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100Mm Sand Cast Iron P Or S Trap, 10 Liter Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, Manually Controlled Device (Handle Lever) Conforming To Is: 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Wall And Floors Wherever Required : White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With With Integral Type Foot Rests. (Chapter No.24 Si. No.1) , Providing Of 3D Ornamental Wall Art Painting By Architect & Special Painter Including Scrapping Of Wall And Two Coat White Putting White Putty One Coat Primer All Labour Scaffolding Work & Labour T&P Etc. Painting By Asian Special Paint Etc. All Complete. (Rate Mr As Smart City, Agra) , Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam (22.40-53Mm) Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With 3 Wheeled Steel/ Vibratory Roller In Stages To Proper Grade And Camber, Applying And Brooming Requisite Type Of Screening/ Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density. , Providing & Laying 5Cm. Thick B.M. Laying By Paver Finisher Bitumen Of The @3.4%Kg By Weight And Stone Grit Etc. All Complete. (20-Chapter Analysis Rate) , Providing & Laying 2.5Cm. Thick S.D.B.C. Laying By Paver Finisher Bitumen Of The 5% By Weight Etc. All Complete. (20-Chapter Analysis Rate) , Supply & Fixing M/S Iron Work Display Board Including Painting, Lettering Etc. All Complete. (None Schedule) , Providing And Fixing White Vitreous China Flat Back Half Stall Urinal Of Size 580X380x350mm With White Pvc Automatic Flushing Cistern, With Fittings, Standared Size C.P. Brass Flush Pipe, Spreaders With Union And Clamps (All In C.P. Brass) With Waste Fitting As Per Is: 2556, C.I. Trap With Outlet Grating And Other Couplings In C.P. Brass, Including Painting Of Fitting And Cutting And Making Good Thg Walls And Floors Whereever Required: Single Half Stall Urinal With 5 Litre Pvc. Automatic Flushing Cistern. (Chapter No.24 Si.No.4A) , Supply And Fixing Of Precast Reinforced Reinforced Cement Concrete Benches (Pfrc) Ornamental Benches With 02 Year Warranty Etc All Complete. (None Scheduled) , S/L/F Supply Of 1000Mm Dia Np-3 Reinforced Cement Concrete Hume Pipe In Proper Position As Directed By E/I Including Catage Of Pipes Collars Upto 30M Distance Etc All Complete. (Chapter No.1 Si.No.31(E) ) , Reinforced Cement Concrete Work With Cement Approved Coarse Sand And 2Cm (3/4) Gauge Approved Stone Ballast In The Proportion 1:2:4 In Reinforced Cement Concrete Slab Excluding Supply Of Reinforcement And Its Bending But Including Its Fixing And Binding The Same With 24 Bwgi Binding Wire And Including Necessary Centring And Shuttering Etc. And Also Including Supply Of All Materials Labor And Tools And Plants Etc. Required For Proper Completion Of The Work. Strength Of The Concrete Shall Not Be Less Than M-150. (5-Chapter S.I. No.-284) , Supply & Fixing Granite Stone Work Display Board (Size 2.50Ft X 4.00Ft) Including Painting, Lettering Etc. All Complete. (None Schedule) , Installation Of 1.50 H.P. Isi Marked Sumbercible Pump Etc All Complete. (Attache As Per Santion Annalysis) , Cost Of Septik Tank Attache As Per Estimate & Details. , Plain Glass Best Quality, Cut To Size 5Mm Thick , Providing And Fixing Designer Dustbin (Market As Per Catlog Code No. Db-03). , Supply Of Planting Of Trees Amaltas, Jaarul, Arjun Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 110Mm Is:4984:2016 (As Per Market Rate) , Hdpe Pipes Pe100 Pn 06 Sdr 21 Dn 160Mm Is:4984:2016 (As Per Market Rate) , Supply & Fixing Of Pre-Cast Reinforced Cement Concrete Drain Cover Different Size Etc All Complete. , Supply And Sowing Of Grass In Park Including One Year Mantinance Etc. All Complete. (None Scheduled) , Supplying And Stacking Of Good Earth At Site Including Royalty And Carriage Upto 8 Km Lead Complete (Earth Measure Dinstacks Will Be Reduced By 20% For Payment) .(Dar 2020 Hort-Basic Rates 2.2) Based , Supply And Fixing Of Light, Fitting Switch Board. (None Sheduled) , Supply And Fixing Of Chest Press Double. , Supply And Fixing Of Leg Press Double. , Supply And Fixing Of Triple Twister. , Supply And Fixing Of Shoulder Builder Double. , Supply And Fixing Of Air Walker. , Supply And Fixing Of Doublebar. , Supply And Fixing Of Rower. , Supply And Fixing Of Horse Rider. , Supply And Fixing Of Plastic Side With Iron Ladder 12 Feet Length. , Supply And Fixing Of See Saw Double Board Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Sliding With Swing Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Slide Ground Level Mgr Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Snack Climber Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Slide Jhoola Etc All Complete. (None Scheduled) , Supply And Fixing Of Nursery Combo Set Revolving Jhoola Etc All Complete. (None Scheduled) , Providing And Fixing Of Stainless Steel Water Cooler 4 Tap Etc. All Complete. (None Schedule) , Supply And Fixing Bansi Paharpur (Red/White) Bharra Sand Stone Fully Moulded, Engraved, Carved With Polishing And Dressing Including Clamp And Fashners Of Pillar Set With All Complete Work Etc. (None Schedule) , Supply & Fixing Of Rubber Moulded Cement Concrete Kerb Stone (Double Tapper) M-20 With Labour T&P Etc All Complete. , Supply And Installation And Jointing Of 500Mmx500mm Epdm Rubber Mat Flooring Of Thickness 24Mm Puling All Labour Material T&P Etc. All Complete (Rate As Per Jhs Jscl Mr). , Providing And Laying Autoclaved Aerated Cement Blocks Masonry With 150Mm/230Mm/300Mm Thick Aac Blocks In Super Structure Above Plinth Level Up T Floor Five Level With Reinforced Cement Concrete Band At Sill Level And Lintel Level With Approved Block Laying Polymer Modified Adhesive Mortar All Complete As Per Direction Of Engineer-In-Charge (The Payment Of Reinforced Cement Concrete Band And Reinforcement Shall Be Made For Separately). , Providing And Fixing Of Barricading Of 100Mm Average Ballies With In A Distance Of 1.50 Meter For 3 Rows Of 3Q. 3 Nosof Cross Ballies, Two Supporting Ballies Of 3 Meter Ballies And 2 Nos Perpendicular Ballies Tie With Moonj Rope Including Supply Of All Material Such As Ballies Rope T&P Required For Proper Completion Of Work And Also Including Labour Component (Material Will Be Property Of Contractor After Dismantling). , Providing & Fixing Of Green/White Shade Multipurpose Net/Cotton Cloth Proper Completion Of Work Etc All Complete. (Ns) , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Supply And Fixing Of Ward Up Big As Per Attach Photograph & Analysis. , Supply And Fixing Of Ward Up Small As Per Attach Photograph & Analysis. , Supply And Fixing And Installation Of See Saw Double Board Jhoola Isi Marked As Per Direction Of Engineer-In-Charge Etc. All Complete As Per Attach Photograph & Analysis. , Supply And Fixing Of Cast Iron Banches As Per Attach Photograph And Analysis And Direction Of Engineer-Incharge Etc. All Complete. , Complete De-Silting And Cleaning Of All Types Of Sewer Lines By Using Super Suction Machine And Taking Out Of Cebris/Silt Etc Including Safe Disposal Of Silt As Directed By The Deptt. Including Cost Of All Consumble Likes Disel Oil, Water Ret Provision Of Diversion Of Line If Required With The Help Of Sewage Pumps, Poser Backup From Gene Sets For Running Of Pumps. Night Lighting Etc Barricades Display Of Entire Operation Along With Sadequate Safely Equipments Must Be Used By Sewer Workers Size Fo Sewer Line To Be Desilted As Detail Above 1000Mm Dia. , providing and laying Gsb With Graded Stone Ballast With Stone Grit Size Stone Ballast With Hand Ramming Watering Including All Material Labor T&P Etc.All Complete (Ns) , Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Foundation And Plinth In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Providing & Laying Of Polythene Etc. All Complete. , Supply & Fixing Of Factory Wired Intergal Led Flood Light Luminaries With Die Cast Aluminum Housing Built With Driver Set Suitable For 140W. To 150W. Confirming To Ip 65 Protection Complete In All Respect. Cat Aaa ( S.I No. 1454 Pwd Schedule 2018) , Providing, Laying, Spreading And Compacting Stone Aggregates 45-63Mm Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Ro Ling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screen Ing/Bindin G Materials To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. (Labour , A Pre-Laminated Sheet, Often Referred To As A Prelam Sheet, Is An Engineered Myka Wood Work Product Where A Decorative Layer, Like Laminate Or Veneer, Is Pre-Attached To A Core Material Like Particleboard Or Mdf. These Sheets Offer A Durable And Aesthetically Pleasing Surface For Furniture, Interior Design, And Construction.(None Scheduled) , Same Is Ltme No-1 & Extra For Providing Lipping With 2Nd Class Teak Wood Battens 25 Mm Minimum Depth On All Edges Of Flush Door Shutters (Over All Area Of Door Shutter To Be Measured) , Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 2Oo/O With 1% Concentration (Chapter No.8 Sr.No.6.1) , Supply And Fixing Of Advertisement Sign Board Size 4X3 As Per Direction Of Engineer-In-Charge Etc. All Complete , Supply Of Planting Of Trees Washington Palm, Amaltas, Cycus Revoluta, Ficus Benjamina Or Any Other As Per Architect Of Road Side 600X600 Dia Hole Meter Daging Road With One Years Maintenance. , Providing Of Rain Water Harvesting Drawing And Analysis Etc. All Complete (Details Attached). , Supply, Fixing And Installation Of Acrelic Led Letter In Hindi As Per Direction Of Engineer-In-Charge Etc. All Complete. , Drilling Of 200Mm Dia T/W Bore Suitable For 110Mm Dia Pipe All Complete With Labour T/P As Per Direction Of Engineer-In-Charge. , Suppply And Lowering Of 110Mm Dia 6 Kg/Cm2 Pvc Pipe (Phenolex Or Apb By E/I) All Complete. (Isi Marked Only) , Supply And Pouring Of Pea Gravel Suitable For T/W Bore All Complete. As Per Direction Of E/I (If Required) , S/L Of 1.50 H.P. Submersible Pump Set 65 Mt Head. (Pluga, Crompton, Ksb Etc.) I.S.I. Marked Etc All Complte. (Water Filled Only) , Supply & Fixing Of 100Mm Pvc Pipe Adopter Suitable For Item No.2 , S/L Of 1.50 H.P. Submersible Motor Controlled Starter Pannel All Complete. Crompton Make. (I.S.I. Marked Only) , Supply/Fixing Of 25Mm Gate Valve All Complete. Approved Make. , Supply/Fixing 4Sq.Mm 3 Core Copper Cable All Complete. , S/L Of 40Mm Dia Red Screen Ashirbad Pvc Pipe All Complete. , Supply/Fixing Of M.S. Clamp Made With 65X6mm X600mm Long M.S. Streep Suitable For 110Mm Dia Pvc Pipe For Holding All Complete. , Supply/Fixing Of 40Mm Dia G.I. Pipe B-Class Complete With Labour Charge. (Including All G.I. Fitting) , Supply & Fixing Of 25Mm Cpvc Etc. All Complete. , Development Of Bore Till The Discharge Is Free From Turbidity Of Compression Including Labour, Required For Proper Completion Of Work. , Supply And Fixing Of Precast Readymade Boundry Wall Hieght 8 Feet Etc All Complete. (As Market Rate) , Useable Brick (A) Class M-L50 , Useable Brick (B) Class M-100 , Useable Brick(C ) Straiqht Over Brunt , (D) Tiles, Bull Nose Drip Course Brick , Brick Ballast (A) Brick Ballast 40Mm Qauge , Brick Ballast (B) Class-150 Brick Ballast 25Mm Gauge , Brick Ballast (C ) Brick - Bats Of O.B.B./150 Bb , Fiy Ash Brick (Specification/Strength Should Not Be Less Than Bricks - M-{50) 230Mmx1 10Mmx75mm , Aac Block Autoclaved Aerated Concrete Block (Aac Block) Conforming To Ls : 2185 - 2005 (Part-3) Including Loading, Cartage Upto Site, Unloading, Stacking And Including All Levies And Royalties If Any But Excludinq G.S.T , Stone Ballast (Khera Thakur Quarry Bharatpur Rajsthan) 45-90 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 45-63 Mm Guage Stone Ballast. , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 22.4-53 Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 20Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) 19Mm Guage Stone Ballast , Crushed Stone Ballast/Grit (Ghatri Quarry Bharatpur Rajsthan) Crushed Stone Dust 2.36Mm & Below , Stone Dust , 13.20Mm Guage , 11.20Mm Guage , 6.7Mm Guage And Below , Stone Boulder (From Khera Thakur Quarry) (A) 25-40 Kq , Stone Boulder (From Khera Thakur Quarry) (B) 40-60 Kq , Stone Boulder (From Khera Thakur Quarry) (C) Stone Bricks Dressed , Grit {District Gwalior(Mp) Quarry}(Berja,Chandrapura, Turak Pura,Parsen,Sumerpada Padampur Kheria, Bhileti & Bilara) District Bhind (M.P.)(Pali, Dirman & Piparsana) , (A) 45-63 Mm Guage Stone Ballast. , (B) 22.4-53 Mm Guage Stone Ballast. , (C) 20-40 Mm Guage Stone Ballast. , (D) 20 Mm Guage Stone Ballast. , (E) 19 Mm Guage Stone Ballast. , (F) 16 Mm Guage Stone Ballast. , (G) 13.20 Mm Guage Stone Ballast. , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 60Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 80Mm Coloured Rubber Moulded , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Rubber Moulded Grey , I Shaped Precast Interlocking Tiles (Strength Of 30Mpa) At Site 100Mm Coloured Rubber Moulded , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 , Rubber Moulded Gement Concrete Kerb Stone M-20 12X12 X6 (Plain) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 16 X6 (Designer) , Rubber Moulded Gement Concrete Kerb Stone M-20 12X 18 X6 , Coarse Sand (Excluding Actual Bulkaqe) , Fine Sand (Excludinq Actual Bulkaqe) , (L) Local Sand , Cement (L) Portland Cement (J.P., A.C.C., Birla, J.K.) O.P.C , Cement (Ll) Cement (P.P.C.) , Cement (Lll) White Cement (J.K. Or Birla Brand) , Green Net(Chapter- 1 Sl.No 44) , Tractor Trolley With Driver Including P.O.L. (Chapter-2 Sl.No 25)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 142
Uttar Pradesh View Result →
23.
Public Administrative Department #11278159 Technical Bid
Tender for Site Clearance: , Surface Dressing Of The Ground Including Removing Vegetation And In Equalities Not Exceeding 15 Cm Deep And Disposal Of Rubbish, Lead Up To 50 M And Lift Up To 1.5 M. All Kinds Of Soil . , Earth Work: , Earth Work In Excavation By Mechanical Means (Hydraulic Wxcavator) Manual ,Eans In Foundation Trenches Ordrains Including Dressing Of Sides And Ramming Ofbottoms, Lift Uoto 1.5M Including Getting Out The Exavated Soil Anddisposal Of Surplus Excavated Soil As Directed Within A Lead Of 50M. , Antitermite Treatment: , Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos/Lindane Emulsifiable Concentrate Of 20%. , Back Filling Of Earth: , Filling Available Excavated Earth In Trenches Plinth Sides Of Foundation Etc.In Layer Not Exceeding 20 Cm In Depth Consolidating Each Deposited Layer By Ramming And Watering Lead Upto 50M And Lift Upto 1.5M. , Filling With Available Fly Ash And Earth In Trenches Bor Embankment In Layer With Intermediate Layer Of Compacted Earth After Every Four Layers Of Compacted Depth Of Fly Ash Sides & Top Layer Of Filling Shall Be Dine With Earth Having Total Minimum Compacted Thickness 30 Cm Or As Decided By Engineer -In- Charge Including Compacting Each Layer By Rolling Ramming And Watering All Complete As Per Drawing And Direction Of Enginner-In-Charge. , Supply & Filling In Plinth With Sand Under Floors Including Watering Ramming Consolidating And Dressing Complete. , Plain Cement Concrete , Providing And Laying In Position Cement Concrete 1:4:8 Aggregated Excluding The Cost Of Centering And Shuttering-All Work Upto Plinth Level. , Reinforced Cement Concrete Work , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring Shuttering Finishing And Reinforced-All Work Upto Plinth Level 1:1.5:3 All Works Upto Plinth Level. . , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete Excluding The Cost Of Centring Shuttering Finishing And Reinforced-All Work Upto Plinth Level 1:1.5:3 All Works Above Plinth Level Upto Floor V Level. , Plinth Protection , Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling & Dressing & Finishing The Top Smooth. , Shuttering & Centering , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Foundations ,Footing ,Bases Of Column Etc. For Mass Concrete. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Columns ,Pillars,Piers, Abutments, Posts And Struts. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Suspended Floors ,Roofs,Landings, Balconies And Access Platform. , Centering Shuttering Including Strutting Propping Etc. And Removal Of From Work Lintels, Beams ,Plinth Beams,Girders, Bressumers And Cantilevers. , Reinforcement Of Steel , Reinforcement For Reinforced Cement Concrete Work Including Straighting Cutting,Bending,Placing In Position And Bending All Complete Themro-Mechanically Treated Bars. , Brick Work , 230Th Brick Work With Comman Burnt Clay F.P.S (Non Modular) Brick Of Class Designation 75 In Foundation & Plinth In Cement Mortar 1:6 , Brick Work With F.P.S Bricks Of Class 75 In Super Structure Above Plinth Level Up To Floor Five Level In All Shapes And Sizes In Cement Mortar 1:6 , Half Brick Masonry With F.P.S Bricks Of Class Designation 75 In Super Structure Above Plinth Level Up To Floor Five Level In Cement Mortar 1:4 , Door, Window, Ventilator , Providing And Fixing Two And Half Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. Using R2 Series With Frame (65 Mm & Above) X (40 Mm & Above) & Glazed Sash (25 Mm & Above) X (50 Mm & Above) & Fly Screen Sash (18 Mm & Above)X (40 Mm & Above) With Zinc Alloy (Zamak) Powder Coated Touch Locks With Hook (Height Upto 1.2 Metre). , Providing And Fixing Two Track Two Panels Sliding Door With Aluminium Channel For Roller Track, Wool Pile, Zinc Alloy (Zamak) Powder Coated Handle On Every Panel Along With Multi-Point Locking System, Adjustable Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (55 Mm & Above) X (40 Mm & Above) & Sash (30 Mm & Above) X (7 4 Mm & Above). (Height Upto 2.5 Metre). , Providing And Fixing Fixed Window I Ventilator With Mullion I Transom. Using R1 Series With Frame (33 Mm & Above ) X (35 Mm & Above) & Mullion (33 Mm & Above) X (50 Mm & Above). (Height Upto 0.90 Metre) , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Extruded Printed And Laminated Section Having Overall Dimension 115 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm) With Inbuilt Beading On One Side, The Styles And Rails Mitred Cut And Joint At Corners By Inserting 2 Nos Pvc Profile Reinforcement Of Size 75 Mm X 200 Mm Long With Cross Section Size Of 28 Mm X 30 Mm Having Wall Thickness 2 Mm (± 0.2 Mm). Styles, Rails And Reinforcements To Be Fusion Welded Together. Only Hinge Side Vertical Style To Be Reinforced With Pvc Profile Reinforcement In Full Length , Railing Work , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Stee Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Spiral Staircase (M.S) , Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works , Providing And Fixing Hand Rail Of Approved Size By Welding Etc. To Stee Ladder Railing, Balcony Railing, Staircase Railing And Similar Works, Including Applying Priming Coat Of Approved Steel Primer. M.S. Tube , Plaster & Finishing Work , 12Mm Thick Plaster On The Plain In Side Of Mix 1:6 Mortar. , 15Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix. , 6Mm Thick Cement Plaster Of Ceiling Of Mix 1:6 Mortar. (Dsr 2023 -13.16.1) , Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade: New Work Over And Including Water Thinnable Priming Coat With Cement Prime. , Providing And Applying White Cement Based Putty Of Average Thickness 1Mm Of Approved Brand And Manufacturer,Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade New Work , Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture Of Required Colour To Give An Even Shade: Two Or Nore Coats On New Work Over An Under Coat Of Suitable Shade With Oridinary Paint Of Approved Brand And Manufacture. , Flooring Work , Providing And Laying Verified Floor Tiles In Different Sizes With Water Absorption Less Than 0.08% And Conforming To Is:15622, Of Approved Make In All Colours And Shades Laid On 20Mm Thick Cement Mortar 1:4 ,Jointing With Grey Cement Slurry @3.3Kg/Sq.M Including Groutibg The Joints With White Cement And Matching Pigments Etc. Complete Size Of Tile 600 X 600 Mm. , Providing And Fixing 1St Qaulity Ceramic Glazes Floor Tiles Conforming To Is:15622 Of Approved Make In All Colours Shades Except Burgundy Bottle Green Black Of Any Size As Approved By Engineer-In-Charge In Skirting,Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry @3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Providing And Fixing 1St Qaulity Ceramic Glazes Wall Tiles Conforming To Is:15622 Of Approved Make In All Colours Shades Except Burgundy Bottle Green Black Of Any Size As Approved By Engineer-In-Charge In Skirting,Risers Of Steps And Dados Over 12Mm Thick Bed Of Cement Mortar 1:3 And Jointing With Grey Cement Slurry @3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. , Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade (0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg), Including Filling I Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. . , Providing And Laying Tactile Tile (For Vision Impaired Persons As Per Standards) Of Size 300X300x9.8 Mm Having With Water Absorption Less Than 0.5% And Conforming To Is:15622 Of Approved Make In All Colours And Shades In For Outdoor Floors Such As Footpath, Court Yard, Multi Modals Location Etc., Laid On 20 Mm Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) In All Shapes & Patterns Including Grouting The Joints With White Cement Mixed With Matching Pigments Etc. Complete As Per Direction Of Engineer-In-Charge. , False Ceiling , Providing And Fixing False Ceiling At All Heights Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Nclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50 Mm Long With 6 Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X1 Ox0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre. , Water & Damp Proofing , Providing And Laying Water Proofing Treatment On Roofs Of Slabs By Applying Cement Slurry Mixed With Water Proofing Cement Compound Consisting Of Applying. ( , Drainage & Water Supply Works , Providing , Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 Including Testing Of Joints Etc. 150 Mm Diameter , Providing And Fixing Square-Mouth S.W Gully Trap Class Sp-1 Complete With C.I Grating Brick Masonry Chamber With Wter Tight C.I Cover With Frame Of 300X300mm Size The Weight Of Cover To Be Not Less Than 4.50Kg And Frame To Be Not Less Than 2.70Kg. As Per Standard Design. , Providing And Laying Cement Concrete 1:5:10 All Round S.W Pips Including Bed Concrete As Per Standard Design. 15Mm Dia S.W Pipe. , Constructing Brick Masonry Chamber For Underground C.I Inspection Chamber And Bends With Bricks In Cement Mortar 1:4. 455X610 Mm Iternal Dimensions Total Weight Of Cover With Frame To Be Not Less Than 38Kg Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix , Providing And Fixing G.I Pipes Complete With G.I Fittings And Clsmps Including Cutting And Making Good The Walss Etc. Internal Work Exposed On Wall. , 15Mm Dia Nominal Bore , 25Mm Dia. Nominal Bore , 50Mm Dia. Nominal Bore , Providing And Fixing Ball Valve Of Approved Quality Complete High Or Low Pressure With Plastic Floats 25Mm Dia. Nominal Bore , Providing And Fixing Gun Metal Non-Return Valve Of Approved Quality :25Mm Nominal Bore. , Providing And Fixing Gun Metal Non-Return Valve Of Approved Quality :50Mm Nominal Bore. , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions 15Mm Nominal Bore. , Providing And Placing On Terrace Polyethylene Water Storage Tank Isi:12701 Marked With Cover And Suitble Locking Arrangement And Amking Necessary Holkes For Intel Outlet And Overflow Pipes But Without Fittings And The Base Vsupport For Tank. , Providing And Fixing Soil,Waste And Vent Pipes:Sand Cast Iron S&S Pipe As Per Is:1729 100Mm , Providing And Fixing Soil,Waste And Vent Pipes:Sand Cast Iron S&S Pipe As Per Is:1729 75Mm , Providing And Fixing Plain Bend Of Required Degree.100Mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Single Equalplain Invert Branch Of Required Degree.100X100x100mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Single Equalplain Invert Branch Of Required Degree.75X75x75mm Sand Cast Iron S &S As Per Is:1729 , Providing And Fixing Mirror Of Superior Glass And Of Required Shape And Size With Plastic Moulded Frame Of Approved Make And Shade With 6Mm Thick Hard Board Backing :Rectangular Shape 453X357mm. , Providing And Fixing Terminal Guard: Sand Cast Iron S&S Pipe As Peris-1729 , Providing And Fixing M.S Stays And Clamps For Sand Iron/Centrifugally Cast Iron Pipes Of Diameter:10Mm Dia. , Providing And Fixing C.P Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms.15Mm Nominal Bore. , Providing And Fixing C.P Brass Stop Cock Of Standard Design And Of Approved Make Conforming To Is:8931. 15Mm Nominal Bore. , Providing And Fixing C.P Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931. 15Mm Nominal Bore. , Providing And Fixing 450 Mm Long Towel Rail With Total Length Of 495 Mm, 78 Mm Wide And Effective Height Of 88 Mm, Weighing Not Less Than 170 Gms , Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 15 Mm Nominal Bore , Providing And Fixing C.P. Brass Long Body Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 690 Gms. 15 Mm Nominal Bore , Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 75 Mm Diameter , Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138Mm, Breadth 102Mm Height Of 75Mm With Concealed Fitting Arrangments Weighing Not Less Than 106 Gms. , Sanitary Works , Providing And Fixing One Piece Construction White Vitreous China Squatting Plate With An Integral Longitudinal Flushing Pipe, White P.V.C. Automatic Flushing Cistern, With Fittings, Standard Size G.I. / Pvc Flush Pipe For Back And Front Flush With Standard Spreader Pipes With Fittings, G.I Clamps And C.P. Brass Coupling Complete, Including Painting Of Fittings And Cutting And Making Good The Walls And Floors Etc. Wherever Required :Range Of Two Squatting Plates With 5 Litre P.V.C. Automatic Flushing Cistern , Providing And Fixing White Vitrepous China Flat Back Or Wall Corner Type Lipped From Urinal Basin Of 430X260xx350mm And 340X410x265mm Size Respectively With Automatic Flushing Cistern With Standard Flush Pipe Abd C.P Brass Spreaders With Brass Unions And G.I Clamps Complete,Including Painting Of Fitting And Brackets Cutting And Making Good The Walls And Floors Wherver Required :One Urinal Basin With 5 Ltr. White P.V.C Automatic Flushing Cistern , Providing And Fixing Soil ,Waste And Vent Pipes Sand Cast Iron S&S Pipe As Per Is:1729 , 100Mm Dia. , 75Mm Dia. , Providing And Fixing Trap Of Self Cleaning Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete,Including Cost Of Cutting And Making Good The Walls And Floors: Sand Cast Iron S&S As Per Is-17 , Providing And Fixing Wash Basin With C.I Brackets, 15Mm C.P Brass Pillar Taps,32Mm C.P Brass Waste Of Standard Pattern,Including Painting Of Fitting And Brackets,Cutting And Making Good White Viterous China Wash Basin Size 630X450mm With Single 15Mm C.P Brass Pillar Tap , Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mminlet: 100Mm Diameter. , Electrical Work , Wiring For Light Point/Fan Point ,Exhaust Fan Point With 1.5Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface Steel Conduit With Modular Switch,Modular Plate Suitable G.I Box For Earhting The Point With 1.5 Sqmm Frls Pvc Insulated Copper Conductor Single Core Cable Isi Marked 1100 Volts Grade As Required For Group C Point Including Ceiling Rose And Lamps Holder As Required , Supplying And Fixing 5/6 Amps.Modular Type Switch On The Existing Modular Plate & Switch Box Including Cconnections But Excluding Modular Plate,Ac Etc. As Required. , Supply/Fixing 1 Or 2 Module Gi Box Of Size 75X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 3 Module Gi Box Of Size 100X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 6 Module Gi Box Of Size 200X75 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 8 Module Gi Box Of Size 125X125 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supply/Fixing 12 Module Gi Box Of Size 200X150 Mm Along With Modular Base And Cover Plate For Modular Switches In Recess Etc As Required. , Supplying And Fixing Following Piano Type 3Pin 5/6A Socket Outlet. , Supplying And Fixing 3 Pin 5 Amps Ceiling Rose On The Existing Junction Box/Wooden Block Including Connections Etc As Required. , Supplying And Fixing Suitable Size G.I Box With Modular Plate And Cover In Front On Surface Including providing and Fixing 3 Pin 5\6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch Connections Etc. As Required. , Supplying And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate And Switch Box Excluding Modular Plate As Required. , Supplying And Fixing Suitable Size G.I Box With Modular Plate And Cover In Front On Surface Including providing and Fixing 6 Pin 15/16 Amps And 5/6 Amps Modular Socket Outlet And 15/16 Amps Modular Switch Connections Etc As Required. , Supplying And Fixing 6 Way Double Door Surface Mounting Vertical Type 240 Volts Tpn Mcb Distribution Board Of Sheet Steel Dust Protected Duly Powder Painted,Including Of 63 Amps Tinned Copper Bus Bars,Common Neutral Link,Earth Bar,Din Bar For Mounting Mcbs Of Havells Make Model Load Line Or Its Equivalent Of Legrand/Abb/L&T/Scienmense Make Inclduing Painting Earhting Etc. As Required. , Supplying And Fixing Single Pole 5Amps-32 Amps Rating 240/415 Volts C Series Miniature Circuit Breaker Suitable For Including Loand Of Following Pole In The Existing Mcb Db Complete With Connections,Testing And Commisioning Etc As Required. , Supplying And Fixing Of 200Mm Sweep Double Ball Bearing Type Exhaust Fan Of Make Usha/Crompton/Phllips/Or Its Equivalent In All Respect As Required And Directed By Enginner-In-Charge. , Led Down Lighter (Smd Type) (System Lumen Efficacy ≥ 105 120 Lm/Watt ) Supplying, Installation, Testing & Commissioning Of Led Recessed/ Surface Down Light. , 30 Watt , 12 -15 Watt , Led Batten Light (System Lumen Efficacy ≥105 120 Lm/Watt) Supplying, Installation, Testing & Commissioning Of Led Surface Mounted Batten Light Of Following Body Material And Construction As Per Is : 10322 , 18- 22 Watt , Providing And Fixing 32 Amps Single Pole Mcb In Existing Cubical Panel Board Including Drilling Holes In Cubical Panel Making Connection Etc. Includingtesting And Commissioning Etc As Required. , Wiring For Circuit/Sub-Main Wiring Along With Earthwire The Following Size Of Frls Pvc Insulated Copper Conductor Single Core Cable I.S.I Marked 1100 Volts Grade In Surface/Recessed Steel Conduitas Required. , 2 X1.5 Sqmm+1X1.5 Sqmm Earth Wire , 2 X2.5 Sqmm+1X2.5 Sqmm Earth Wire , 2 X 4 Sqmm+1X4 Sqmm Earth Wire , 2 X 6 Sqmm+1X6sqmm Earth Wire , Supply , Installation,Testing And Commissiong Of 1200 Mm Sweep, Bee 5 Star Rated,Ceiling Fan. , Water Cooler , Ceiling Fan , Wall Hanging Fan , Interior Work , Furniture Work , Mid Back Mesh Revolving Chair Black , High Back Revolving Chair Black/Blue , Workstation 8 Seater (8 Seater Table) Size: 96X36X30 , Bookcase Steel (4 Shelf Glass) Size: 72X30X18 , Workstation 8 Seater (8 Seater Table) Size: 12X2x2 , Directior Table Size: 72X36X30 , 5 Seater Sofa With Table , Air Conditioner , 2 Ton 5 Star Voltas , 1 Ton 5 Star , A/C Installing Charge , Wall Stand , Computer , Hp A/O Desktop 27-Cr0902in I3-13T 8Gb/512Gb/Win/Mso , Hp A/O Desktop 24-Cr0902in I3-13T 8Gb/512Gb/Win/Ms , Hp Printer Smart Tank 580Aio P/S/C/W , Cctv Camera , Dvr Cp Plus 8Ch , Smps 10A , Bullet Camera 2.4Mp (Guard+Mic) , Dome Camera 2.4Mp (Guard+Mic) , Hdd 2Tb , Pvc Box , Bnc Connector Set , Rack 2U , Installation Charge , 3+1 Cable , 1.5 Mtr. Hdmi Cable , 32 Inch Led Smart Tv
Contract Date: Ref. Documents Contract Value : Ref. Document
Local Bodies No of Bidders 8
Uttarakhand View Result →
24.
Defence #11271178 Technical Bid
Tender for Taking Down Carefully Aluminium Point Wiring (Light, Fan, Socket Or Power) Complete And Making Good Disturbed Surfaces Of Walls, Floors, Etc. All As Directed.Including Taking Down Fittings Such As Switches, Ceiling Roses, Regulators, Sockets,Lamp Holders Etc. , M&L For Point Wiring With Two Runs Of Frlsh Pvc Insulated Unsheathed, 1100 V Grade Cable Multi Stranded Copper Conductor Of Size 1.5 Sqmm Drawing Through In And Including Pvc Casing Capping Of Size Not Less Than 20Mm On Surface Of Wall Including Provn Of Pvc Box/Modular Metal Flush Box Of Suitable Size For Mounting Switch, Socket And Regulator Along With Earth Wire Of Pvc Insulated, Unseathed, 1100 V Grade Cable Multi Stranded Copper Conductor Of Size 1.5 Sqmm All As Specified And Directed.One Light/Fan/Call Bell Point Controlled By One Switch One Way 5 Amps. , All As Per Sl Item No.2 But With One 2/3 Pin Socket Outlet 5Amps On Independent Board. , All As Per Sl Item No.2 But With One 3 Pin Socket Outlet 5 Amps On The Same Board With Other Switches , All As Per Item No 2 Above But One Switch Socket Combination 15 Amps On Independent Board With Cable 2.5 Sq Mm Size And Earth Wire 2.5 Sqmm . , S&F Switch Piano Flush Type Single Pole One Way Switch 5 Amps. , S&F Switch Socket Combination 2 In 1, 5 Amps Flush Type. , S&F Switch Socket Combination 2 In 1, 3 Pin, 6 And 16 annual periodical maintenance Flush Type Universal All As Specified And Directed. , S&F Ceiling Rose Surface Bakelite 3 Terminals 65X50mm All As Directed. , Supply And Fixing Led Lights Fitting 1X 18W, 220V, Ac Decorative Box Type With Driver, Holder Including Led Tube Light Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceilingrose Complete. , Supply And Fixing Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete. , Supply And Fix In Repair Modular Switch 1Way 6A,1Module , Supply And Fix In Repair Modular Switch 1Way 16A,1Module , Supply And Fix In Repair Modular Socket, 6A-2/3 Pin Combined 2 Module , Supply And Fix In Repair Modular Socket, 6A/16A-2/3 Pin Combined 2 Module , S&F In Repair Lamp Holder Angle Type Made Of Pvc/Polycarbonate With Back Plate. , Supply And Fixing Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, 220 V Ac Surface / Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete. , Supply And Fixing Round/Square Shape 12 Watt 220 Volts Ac Surface/Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Drivers, Holders, Led Lamp Suitable For Roof Ceiling Including Connecting Up With Three Core Flexible Copperconductor Cable Of Suitable Size Complete. , Supply And Fixing Round/Square Shape 15 Watt 220 Volts Ac Surface/Recessed Type With High Efficiency Pmma Diffuser Soft Glare Free Light Complete With Drivers, Holders, Led Lamp Suitable For Roof Ceiling Including Connecting Up With Three Core Flexible Copperconductor Cable Of Suitable Size Complete. , Supply And Fixing In Replacement Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminum Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Including Thermal Management In Multiple Optics Complete With Ip 65/66 Protection Including Taking Down Old Unserviceable Light Fitting Complte. , S & F Led Light Fitting 1X9w/1X10wbulkhead Luminaires Including Led Light Driver Holder Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size. , S&F In Replacement Of Mccb 125 Amps 4 Pole 16 Ka 415 Volt Complete Including Taking Down All As Specified & Directed. , S&F In Replacement Of Mccb 100 Amps 16 Ka 4 Pole Complete All As Specified & Directed. , S&F In Replacement Of Mccb 63 Amps 10Ka Complete All As Specified & Directed. , S&F In Replacement, Sheet Metal Enclosure Distribution Box Suitable For Mcbs 4 Way Tpn 415 Volts With 200 Amps Rated Bus Bar Double Door Complete Including Connecting Up All As Specified And Making Good Distrubed Surface , All As Per Item No. 27 Above But 8 Way Spn With 200 Amps Rated Bus Bar , 240 Volts , All As Per Item No 27 Above But 4 Way Spn With 200 Amps Rated Bus Bar , 240 Volts , S&F In Replacement Mcb Single Pole, 240 Volts 5 To 32 Amps 10 Ka Rupturing Capacity, C Series , S&F In Replacement Mcb Single Pole, 240 Volts 40 Amps 10 Ka Rupturing Capacity, C Series , S&F In Replacement Mcb Single Pole & Neutral 240Volts 20 To 32 Amps, 10Ka Rupturing Capacity, C Series , S&F In Replacement Mcb Triple Pole 415 Volts 25 To 63 Amps 10Ka Rupturing Capacity, C Series. , Taking Down Sub Main Wiring Of Any Size Complete All As Specified And Directed. , M&L For Sub Main Wiring With Two Single Core Stranded Copper Conductor Unsheathed Pvc Insulated Cable 1100V Grade, 4 Sq Mm Drawn Through Suitable Size Of Non-Metallic Pvc Rigid Conduit With 4 Sqmm Copper Conductor Cable As Earth Conductor Of 4.0 Sq Mm And Conduit Accessories Fixed Up In Surface Including Connecting Up Complete All As Specified And Directed. , M&L For Sub Main Wiring With Two Single Core Stranded Copper Conductor Unsheathed Pvc Insulated Cable 1100V Grade, 6 Sq Mm Frlsh Drawn Through Suitable Size Of Non-Metallic Pvc Rigid Conduit With 6 Sqmm Copper Conductor Cable As Earth Conductor Of 6.0 Sq Mm Frlsh And Conduit Accessories Fixed Up In Surface Including Connecting Up Complete All As Specified And Directed. , M&L For Replacement Of Submain Wiring Alongwith Earth Wire With 4X10.0 Sq. Mm +1X10.0 Sq. Mm Earth Wire Sq Mm Sizes Of Frls For Is Pvc Insulated Copper Conductor, Single Core Cable In Existing /Surface/Recessed As Required In Pvc Conduit. , Taking Down Exhaust Fan Of Any Size Type And Make After Disconnecting The Electrical Connections ,Cleaning, Servicing , Greasing Removing And Replacing All The Unserviceable Spare ,Painting With Two Coats Of Synthetic Enamel Paint By Means Of Suitable Spray Gun After Cleaning And Prepairing The Suface Including Writing The Mes No. ,Fixing The Same Back To The Original Location All As Directed. Note For Item No. 40, 41 & 42 : (I) All The Replaced Spare For Unserviceable Spares Will Be Measured And Paid Separately (Ii) The Rate Quoted Shall Be Deemed To Include The Cost Of Painting And Minor Spares Such As Split Pin , Screws Washers Etc. , Supply Only Ball Bearing Suitable For Exhaust Fans 300/450Mm Dia Sweep. , Supply Only Capacitor 4 Mfd For Exhaust Fans. , Supply Only Gun Metal Bush Suitable For Exhaust Fans Of 300/450 Mm Sweep. , Supply Only Twin Core Flexible Wire 1 Sqmm For Connecting Up Ceiling Fans, Exhaust Fans/Wall Mounting Fan Etc. , Taking Down Old Burnt Out Copper Winding Wire From Exhaust Fan Of Any Sweep And Rewinding By Using The Same Gauge Of Copper Wire Super Enameled Including Heating And Varnishing,Cleaning, Servicing,Greasing ,Refixing At Siteand Testing For Smooth Functioning Complete All As Specified & Directed. , Supply Only Modular White Cover Plate With Frame, 2 Module Isi Marked Complete All As Specified And As Directed. , Supply Only White Cover Plate With Frame, 4 Module Isi Marked Complete All As Specified And As Directed. , Supply And Fix White Cover Plate With Frame, 6 Module Isi Marked Complete All As Specified And As Directed. , Supply Only White Cover Plate With Frame, 8 Module Isi Marked Complete All As Specified And As Directed. , Earthing Complete With Gi Earth Electrode Of Size 60Cmx60cmx6mm Buried Directly In Ground Vertically At A Depth Not Less Than 2.25 Metre Below Normal Ground Level With Top Edge Of Earth Plate At A Depth Not Less Than 1.5 Metre Below Normal Ground Surrounded From All Sides By 15Cm Thick And Packed Layer Of Charcoal Dust And Conmmon Salt Filling In Alternate Layers Connected To And Including Gi Earth Wire 4.0 Mm Dia Upto 7.5 Mtr By Means Of Bolts, Nuts, Check Nuts And Washers, And Protected By Light Grade 20 Mm Dia And Connected To Main Control Board And Gi Pipe Medium Grade 20Mm Bore For Watering And Including Funnel Wire Mesh, Reinforced Cement Concrete Pit Cover 50Mm Thick With 10Mm Dia Reinforcement 100Mm C/C And Plain Cement Concrete Chamber Pit With P C C 1:2:4 Type C2 (Including Excavation And Earth Work, Disposal Of Surplus Soil To A Distance Not Exceeding 50 Metre And Testing After Completion Including Dismantling Of Old Unserviceable Earthing All As Specified And Shown On Plate No 3 Of Ssr Part-I 2009 , S&F In Replacement Earth Continuity Conductor Or Main Earthing Lead Fixed To Wall On Batten Or Recess Or Chases Or Buried Inground Or Drawn In Conduit/Pipe Or Fixed To Poles Or Any Other Indicated Situation For Loop Earthing Etc. As Required 4Mm Dia Galvanised Iron Or Steel Wire , S&F In Replacement For 20 Mm Bore Galvanised Steel Water Tubing Medium Grade With All Fitting Laid In Trenches Including Taking Out Old Unserviceable Pipe Complete All As Specified. , Repair / Servicing Including Trouble Shooting /Repair Of Geyser 25 To 50Ltrs Capacity Checking Of Serviceability Of Individual Parts Such As Thermostat, Heating Element, Pressure Release Valve, Inlet/Outlet Connections Etc, Replacing Worn-Out Fasteners And Defective Components And Testing Including Taking Down The Geysers And Refixing The Same After Repairs. Note : Spare Parts Including Replacement Will Be Measured And Paid Separately Under Relevant Item. Rate Quoted Shall Include Replacement Of Worn-Out Fasteners. , Supply Only Heater Coil Of Geyser All 1.5 Kw As Per Existing Make / Model / Size Conforming To Relevant Is.(As Required At Site) , All As Per Item No 53 Above But 2.0 Kw (As Required At Site) , Supply Only Thermostat For Any Type /Make/Capacity Of Geyser .(As Required At Site) , Supply Only Pressure Release Valve 15Mm Dia With New One For Any Type /Make/Capacity Of Geyser . , Supply Only Pvc Flexible Connection Of 15 Mm Dia 600 Mm Long With Check With New One Suitable For Cold/Hot Water Connection Of Geysers , Supply And Fix In Replacement 20 Mm Non Return Valves, Cast Copper Alloy, For Gi Pipes Pipe All As Directed , Taking The Copper Or Steel Container Carefully From The Geyser, Descaling, Rectifying Leakage By Braising, Resetting The Insulating (Glass Wool), Testing For The Required Pressure Replacing Rubber Gaskets, Worn-Out Fasteners Etc,. With New Ones Complete All As Directed By Engineer In Charge. , Supply And Fix Base Plate Of Water Heater Of 25 / 50 Ltrs Capacity All As Directed , S&F In Replacement Of Single Pole And Neutral Sheet Metal Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb Sp 20 Amps, 240 Volts, Ac,50 Hz, Completete All As Directed And Specified, Including Taking Down Old Unserviceable Plug Socket And Offering For Credit.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
26.
Educational and Research Institute #11269588 Technical Bid
Tender For Civil Work At Mgsss, Sahawa Block Taranagar- 1 Part A Civil Work 2 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator )/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sum On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Taking Out The Excavated Soil And Depositing And Refilling Of Jhiri With Watering & Ramming And Disposal Of Surplus Excavated Soil As Directed With In A Lead Of 50 Meter.All Kinds Of Soils 3 P.C.C. In Foundation Providing And Laying In Position Cement Concrete Including Curing Compaction Etc. Complete In Spcified Grade Excluding The Cost Of Centering And Shuttering All Work Upto Plinth Level 1:4:8(1 Cement:4 Coarse Sand :8 Gradeed Stone Aggregate 40 Mm Nominal Size). 4 Brick Masonry With F.P.S. Bricks Of Class Designation 75 In Foundation And Plinth With Bricks Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 5 Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation, Footings, Strap Beam, Raft, Bases Of Columns Etc. 6 Providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement M20 Grade Nominal Mix / Design Mix 7 Brick Work With Clay Flyash F.P.S. Brick (Is 13757- 1993 ) Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor Five Level In : Cement Mortar 1 : 6 (1 Cement : 6 Coarse Sand) 8 Half Brick Work With Mechanised Autoclaved Flyash Lime Bricks Conforming To Is: 12894 :2002 Of Class Designation 100 In Superstructure Above Plinth Level Upto Floor V Level In. C.M.1:4 9 Supplying And Fixing Stone Lintels/Bed Plates Of Approvedquarry Rough Dressed In Cement Mortar 1:4 Upto 15 Cm. Thick: 10 Centering & Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways With Steel Props And Removal Of Formwork For Upto Floor Five Level For :Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc 11 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding (Including Cost Of Binding Wire) All Complete Up To Floor Five Level. 12 Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 (1 Cement: 3 Coarse Sand) And Making Good The Joints And Cost Of Plastizers( If Required) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc.M20 Grade Nominal Mix / Design Mix 13 Stone Kharanja: Random Rubble Dry Stone Kharanja Under Floor 14 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M10 Grade Nominal Mix1: 3: 6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size). 15 Providing & Fixing Ist Quality Standard White, Gray, Ivory,Fume Red Brown, Light Green, Light Blue And Other Light Shades Glazed Tiles Confirming To Is : 13753 And Is: 15622 Of Size 300Mm X 200Mm In Walls, Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of Tile Complete (Excluding The Cost Of Cement Plaster On Walls And Piller) 16 Providing And Fixing 1St Quality Mat Finished Ceremic Tile Size 300X300Mm Confirming To Is : 13755 And Is : 15622 Colour Such As White, Grey, Ivory, Fume Red Brown, Light Green, Light Blue And Other Light Shades In Floors, Steps, Pillars Etc. Laid On A Bed Of Neat Cement Slurry Finished With Flush Pointing In The White Cement Mixed With Pigment To Match The Shade Of The Tile Complete (Including The Cost Of Cement Mortar Bed 1:4). 17 Door Frames : P & F T- Iron Frames For Doors , Windows And Ventilators Of Mild Steel , Tee Section Joints Mitred And Welded With 15X3 Mm Lugs 10 Cm Long Embedded In Cement Concrete Blocks 15X10X10 Cm Of 1:3:6 (1 Cement:3 Fine Sand6 Graded Stone Aggregate 20 Mm Nominal Size:) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Required Including Fixing Of Necessary Butt Hinged And Screws And Applying A Priming Coat Of Approved Steel Primer 18 Providing And Fixing M.S. Sheet 1Mm Thick Single Leaf Door Shutter Windows In Angle Iron Frame 35X35X5 Mm Suitabilly Diagonally Braced With 25X3Mm Flat Iron Above And Below Lock Rail Of Size 50X5Mm Beading Extra Including All Fittings, As Per Direction Of Engg. Incharge But Excluding Cost Of Chowkhats: Including Two Coats Of Anit-Corrosive Red Oxide Primer Paint 19 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 (1Cement : 3 - Fine Sand) 20 Internal Plaster :Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished : 12Mm Thick 21 External Plaster : Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finished 20 Mm Thick 22 Grading Roof For Water Proofing Treatment Cement Concrete 1: 2: 4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate 20 Mm Nominal Size) 23 Providing And Fixing Steel Glazed Doors Windows Andventilator Shutters Of Standard Rolled Steel Section (Is 1038-1983) Joints Mitred And Welded With Steel Lugs 13X3Mm, 10Cm.Long Embedded In Cement Concrete Block 15X10X10Cm. Of1:3:6 (1Cement : 3 Coarse Sand : 6 Graded Stone Aggregate20Mm Nominal Size) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws With Fixing Clips Or With Bolts And Nuts Asrequired Including Providing And Fixing Of Plain Glass Panes 4Mm Thick With Cooper Glazing Clips And Special Metal Sashputty Of Approved Make Or Metal Beading With Screwscomplete Including Priming Coat Of Approval Steel Primer,Excluding The Cost Of Metal Beading And Other Fitting Exceptnecessary Hinges Of Pivots Steel Handles Peg Stay Etc. Asrequired Partly Fixed And Partly Openable [ Fixed Area Not To Exceed33%] 24 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gaugeto The Metal Frame Of Rolled Section By Metal Beading 20X3Mmwith Suitable Screw At Not Exceeding 150Mm Distance 25 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc.12Mm Dia 26 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete 27 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding:New Work (Two Or More Coats) Over And Including Scrapping And Priming Coat With Cement Primer 28 Finishing Walls With Acrylic Smooth Exterior Paint Of Requiredshade Including All Scaffolding.New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Overand Including Base Coat Of Water Proofing Cement Paint Applied@ 2.20 Kg/ 10 Sqm ). 29 Panting On Doors & Windows :- Painting With Syntheitic Enamel Paint Of Approved Brand And Manufacture In All Shade To Give An Even Shade New Steel Work (2 Or More Coat On New Work). 30 Copping: Cement Concrete Flooring 1:2:4 (1 Cement: 2 Course Sand: 4 Greded Stone Aggregate) Finishing With A Floating Coat Of Neat Cement Including Cement Slurry, Making Of Lines Or Groove Etc. Complete But Excluding The Cost Of Nosing Of Steps Etc. Complete : 40Mm Thick With 20Mm Thick Nominal Size Aggregate. 31 Chequerred Precast Cement Concrete Tiles 22 Mm Thick In Footpath & Courtyard Jointed With Neat Cement Slurry Mixed With Pigment To Match The Shade Of Tiles Including Rubbing And Cleaning Etc. Complete On 20 Mm Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Light Shade Using Shade Cement.P 32 Part B Sanetary Work 33 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. (Concealed Work Including Cutting Chases And Making Good The Walls Etc.,)20Mm Nominal Outer Dia Pipes 34 25 Mm Nominal Outer Dia Pipes 35 P & F Indian Type White Glazed Vitreous China 1St Quality W.C. Orissa Pan (Is :2556 Mark) With 100 Mm Vitreous China P Or S Trap Including Cutting And Making Good The Wall And Floor: Size 530*410Mm 36 Providing & Fixing Premium Qulaity Wvc Urinal With Pvc Waste Pipe, Dome Couplings, Concealed Iron Brackets Or Screws Etc. Complete Mini Stall Size 455*385*350 Mm. 37 P & F W.V.C. (Is: 2556 Mark) Squatting Urinal Of Standard Make Complete. Including Cutting & Making Good The Floor:. Size 450X350Mm 38 P & F Wvc Wash Basin (1St Quality, I.S. : 2556 Mark) Of Approved Make With C.I. Brackets Duly Painted, 1 No. 15 Mm C.P. Pillar Cock (Is : 8934 Mark) & 32 Mm C.P. Brass Waste Coupling Of Approved Make,25 Mm G.I. Waste Pipe Complete Including Cutting & Making Good The Wall.: 450 X 300 Mm 39 P & F Bib Cock (Is : 8931 Mark) Superior Quality Of Approved Make.C.P. Brass 400 Gm, 15 Mm Nominal Bore. 40 P & F Inlet Connection (Angle Valves) Superior Quality Of Approved Make C.P. Intel Connection 15 Mm Brass (Is : 8931) 41 P&F Rigid Pvc Pipe (Is:4985 Mark) Class Ii/ (4 Kg. /Cm2.) Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant. 110 Mm Dia 42 P & F Low Level Flushing Cistern Of 10 Litres Capacity (Is : 2556Mark). Of Approved Make With Complete Fittings C.I. Brackets Duly Painted, Brass Ball Cock With Ball, (Is: 1703 Mark) Complete Including Cutting And Making Good The Wall:Pvc With Pvc Bend And Superior Internal Fittings As Per Is :7231 43 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant: Bend 87.5 110Mm Dia 44 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant Plain Floor Trap 110 Mm Dia 45 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant P-Trap 110 Mm Dia 46 P&F Rigid Pvc Pipe Fittings (Is: 4985 Mark) Of Approved Quality /Make Including Joining The Pipe With Solvent Cement Rubber Ring And Lubricant Vent Cowel 110 Mm Dia 47 S/F Rcc Main Hole Covers With Frame Of Approved Make (Light Duty) Size 450X450 Mm 48 P/F Grating Of Approved Quality Stainiese Steet Sheet Size 125 Mm Dia 49 Construction Of Soakage Well In All Types Of Soil Of Approved Drawing , Top 90 Cm Portion In 450 Mm Thick With Cement Mortar 1:6 80 Mm Stone Slab Covering Jointing Of Slab In Cm 1 : 3, Ralthal, Kharanja, 40 Mm Thick M-15 Grade C.C. Flooring Earthwork Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inner Dia 90 Cm & 10 To 12 M Deep 50 Construction Of Chamber In All Types Of Soil With 300 Mm Thick Masnory In Cm. 1 : 6, 100 Mm Thick C.C. 1 : 5 : 10 In Foundation , 20 Mm Thick Inside Plaster In Cm 1 : 6, Finished With Floating Neat Cement 50 Mm Thick M-15 Grade C.C. Flooring Earthwork Etc. Complete As Per Design Including Disposal Of Surplus Earth Within A Lead Of 50 Mtr.Inside Size 450 X 450 Mm Depth Upto 0.5 M & 5 Kg Ci Cover With Frame. 51 P & F Ball Cock (Is : 1703 Mark) With Rod & P.V.C. Ball Complete.Brass Wt. 300 Gm, 15 Mm 52 P & F 15 Mm Dia Connection Pipe Of Approved Quality Make Pvc Pipes With Nuts 450 Mm. 53 P & F Stop Cock (Is:8931 Mark),Superior Quality And Of Approved Mark: Brass 400 Gm. 15 Mm Nominal Bore 54 P & F Pvc Storage Tank Isi Marked ( Is : 12701) Indicating The Bis License No. Of Approved Make With Cover , 25Mm Dia 1 M Long G.I. Overflow Pipe & 25 Cm Long Wash Out Pipe With Plug & Socket Including Making Connection Etc. Complete Of Approved Design 500 Litres Capacity 55 Construction Of Septic Tank In All Types Of Soil With 40 Cm .Thick Masonry In Cm 1:6, 15 Cm Thick C.C Bed Of 1:5:10, M- 15 Grade C.C Floor & Rcc Slab Covering With M15 Grade C.C. Floor, 50 Mm Thick Stone Slab Partition Walls, 20 Mm Thickplaster In Cm 1:6 Finished With Neat Floating Cement, 4 Nos Foot Rests Of Approved Design ,Two No. 450 Mm Dia Eachferro Cement Cover With Frame, Earth Work Etc. Complete As Per Approved Drawing Including Disposal Of Surplus Earthwithin A Lead Of 50 Mtr:-Size 200X100X130 Cm.(For 10 Users) With 115 Mm Thick Rcc(M-20) Slab With Tor Steel Reinforcement 8Mm Φ @15 Cm C/Cbothways Including Shuttering Complete In All Respe 56 Part C Electrical Work 57 Wiring Of Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (Is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories( J.B. , Bends Etc.) , Round Tiles,18 Swg Hot Dipped Galvanized Modular Box With Earth Terminal, 6 A Modular Switch, Modular Face Plate With Grid Plate, 3 Pin Ceiling Rose / Lamp Holder/ 3 Pin Connector , Screws Etc, Making Connections,All As Per Pre Approved By Engineer In Charge, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07 . For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 58 Short Point (Up To 3 Mtr.) 59 Medium Point (Up To 6 Mtr) 60 Long Point (Up To 10 Mtr) 61 Wiring Of 3/5 Pin 6 Amp. Light Plug Point As Per Pwd Specification For Electrical Works With Isi Marked 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Conductor 1.1 Kv Grade (Is:694) And 1.5 Sq. Mm Nominal Size Fr Pvc Insulated Unsheathed Flexible Copper Earth Conductor 1.1 Kv Grade (Is:694) In Recessed Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit & ItS All Accessories( J.B. , Bends Etc.) , Round Tiles,18 Swg G.I. Box With Earth Terminal Of Required Size, 6 A Switch, 3/5 Pin 6 A Socket, 3.0 Mm Thick Isi Marked Phenolic Laminated Sheet (Is : 2036 - 1995), Al. Alloy/ Cadmium Plated Iron Screws 20 Mm Cup Washers Etc. All As Per Pre Approved By Engineer In Charge, Making Connections, Testing Etc. Complete As Required. For Specification Of Copper Conductor, Phenolic Laminated SheetS & Electrical/ Wiring Accessories Refer Chapter E - 04, E - 05 & E - 07. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 62 On Board 63 S&F Following Sizes (Dia.) Of Isi Marked Mms ( Is:9537 P - Iii ) Vergin Material Pvc Conduit As Per Pwd Specification For Electrical Works Along With Its Accessories (Is: 3419 ) As Required In Recess Including Cutting The Wall, Covering Conduit And Making Good The Same As Required. All Relative And Latest Acceptance Tests Reports By Any Nabl Accredited Lab For The Conduit Shall Be Submitted Before Execution & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 64 25 Mm Dia 65 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.99% Purity Copper, Class 5 Stranding In Acc. To Iec 60228 For Lower Watt Loss , Oxygen Free ( 66 2 X 1.5 Sq. Mm 67 2 X 2.5 Sq. Mm
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 3
27.
Tourism #11266721 Price Bid
Tender for Civil Works , Clearing Grass And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sq.M On Plan) Including Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5M Disposed Earth To Be Leveled And Neatly Dressed Including Providing Barricading, Danger Lighting Guarding As Directed In : All Kinds Of Soil , Earthwork In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Pipeline Trenches Drain (Not Exceeding 1.5 M In Width Or 10 Sq.M. On Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed Within A Lead Of 50 M. B) All Types Of Ordinary Rock Including All Types Of Laterite Rock, Blasting Prohibited , Refilling The Pipeline/Foundation Trenches Plinth Sides, Foundation Etc. With Available Excavated Earth In Layers Not Exceeding 20 Cm Depth Consolidating Each Layer Ramming And Watering Lead Upto 50 M And All Lifts And Disposal Of Surplus Earth As Directed By Engineer . , Brick Work Using Common Burnt Building Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) With Bricks Of Class Designation 40 Kg / Cm2 (Wire Cut Bricks) In Superstructure Upto Floor Five Level. , Rubble Packing With Hard Laterite Stone Under Floors Including Watering Ramming And Consolidating Etc. In Pipeline Trenches And Other Foundations Complete. , Laterite Masonry In Neatly Dressed Stones For 23 Cms Thick Masonry Walls In C.M. 1 : 4 (1 Cement : 4 Coarse Sand In Foundation Upto Plinth Level , Extra For Laterite Masonry In All Sizes In Superstructure From Floor I Level Upto Floor V Level. , Half Brick Masonry Usign Fly Ash Bricks In Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) With Bricks Of Class Designation 40 Kgs / Cm2. Above Plinth Upto Floor V Level 200 X 95 X 95 , Providing & Laying Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm. Nominal Size) Excluding Cost Of Centering, Shuttering And Finishing In: A) All Work Up To Plinth Level , Providing And Laying In Position Ready Mixed Concrete (Rmc) With Usage Of Ordinary Portland Cement Manufactured In Fully Automatic Batching Plant And Transported To Site Of Work In Transit Mixer For A Lead Upto 10Kms Having Continuous Agitated Mixer, Manufactured As Per Mix Design Of Specified Grade For Reinforced Cement Concrete Work Including Pumping Of R.M.C., From The Transit Mixer To The Site Of Laying, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement Including The Cost Of Admixtures In Recommended Porportions As Per Is : 9103 To Accelerate/Retard Setting Of Concrete, Improve Workability Without Imparing Strength And Durability As Per The Directions Of The Engineerin-Charge. All Works Upto Floor V Level M-30Grade Of Concrete , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. String Courses, Copings, Bedplates, Anchor Blocks, Plain Window Sills And The Like. , Providing And Laying Upto Floor Five Level Cement Concrete 1:2:4 (1 Cement: 2 Coarse Sand: 4 Graded Granitic Or Basaltic Stone Aggregate 20 Mm Nominal Size) Including Smooth Finishing To Exposed Surfaces, With Cement Mortar 1:3 (1 Cement: 3 Fine Sand) Including Centering And Shuttering Etc. Moulding As In Cornices, Window Sills Etc. Exceeding 15 Cm In Girth. , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Foundation, Footings, Bases Of Columns , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Vertical Surfaces Such As Retaing Walls, Return Walls, Partitions, Walls (Any Thickness) Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets And The Like , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Columns, Piers, Pillars, Aburments, Posts And Struts (Square Rectangle Polygon In Plan) , Centering And Shuttering Including Strutting, Propping, & Removal Of Form For Sides And Soffits Of Beams, Beam Haunchings, Cantilever, Girders, Bressumers And Lintels Plinth Beams Not Exceeding 1M In Depth , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For : Suspended Floors, Roofs Landings, Shelves & Their Supports , Centering & Shuttering Including Strutting, Propping & Removal Of Forms For Sloping Or Battering Surface (Slabs, Beams, Louvers, Etc) Including Folded Plates Columns, Pillars, Posts & Struts (Circular Or Curved In Plan) , Providing Tmt Steel Reinforcement Bars Of (Sail, Tata. Vizag, Jsw Steel Ltd.) ) (Confirming To Is 1786 Of 1986) For Reinforced Cement Concrete Work (Conforming To I.S. 1786 Of 1986) Including Bending, Binding & Placing In Position In All The Floors Along With The Factory Made Precast Concrete Cover Blocks Of Specified Sizes Whose Compressive Strength Is Not Less Than That Of Surrounding Concrete In The Structural Member. , Steel Work Welded (Sail, Tata. Vizag & Using Electrodes Of Ador Or Es4b Or Deh Secheron Make Only)In Built Up Sections Trusses And Framed Work Including Cutting, Hoisting, Fixing In Position And Applying Priming Coat Of Red Lead Paint. B) In Tees, Angles, Flats And Channels , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) (Square Hollow Section (Shs) Is4923 /Rectangular Hollow Section (Rhs) Is4923/ Circular Hollow Section (Chs) Is1161 Closed Structural Steel Of Approved Make (Min Yeild Stress 310 Mpa)) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. , Providing And Fixing Stainless Steel (Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc.With Hairline Finish, Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners, Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). , Providing & Fixing Upvc Door Frame Yashashri Make Or Equivalent Made Out Of Upvc Extruded Multi Cavity Frame Of 60 Mm X 60Mm X 2Mm Wall Thickness. Frame Is Reinforced With G.I. Channel & Welded In Corners With Average Weight 0.80 Kg Per Running Mtr. These Frames Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing & Fixing 20 Mm Door Shutter Yashashri Make Or Equivalent, Made By Using 20Mm X 155Mm X 1.2Mm Upvc Multi-Cavity Section And Boarder Of 30Mm X 40Mm X 2.5Mm Upvc Multi Cavity Section. The Corners Are Joined By Inserting Polymetric Corners & Hardware Used For Fixing The Door Shutter Is Stainless Steel Hinges & S. S. Handle & S.S. Tower Bolt. The Average Weight Of 20Mm Door Shutter Is 4.60Kg Per Sq Mtr. These Upvc Sections Are Tested By Using Bs 2782 & Din 53459 Test Methods. , Providing And Fixing Bright Finished Brass Door Latch With Necessary Screws Etc Complete 250 X 16 X 5 Mm , Providing & Fixing Bright Finished Stainless Steel Ss 304 Grade Aldrops With Screws Etc. Complete. 250 X 150Mm. All Works Complete As Per The Drawing, Specification And Direction Of The Engineer-In-Charge-In-Charge , Providing And Fixing Stainless Steel D Type Handles With Necessary Screws Etc Complete A) L 300Mm/325Mm X 22 To 25Mm Dia , Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Screws Etc. Complete 125 X 70 X 4.0Mm (Ordinary Type) , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 200 X 10 Mm , Providing And Fixing Bright Finished Brass Tower Bolts (Barrel Type) With Screws Etc. Complete 150 X 10 Mm , Providing Frp Door Shutters 35Mm Thick With Frame Size In Clear Opening Of 0.75X2.10M Hinges And Screws Complete., , Providing And Fixing Anodized Aluminum Ventilators (Including Frame And Shutter ) With Three Partitions With 5 Mm Thick Approved Clear Float Glass In One Partition, Exhaust Opening In One Partition & 6 Mm Thk Glass Louvers In One Partition With Using Weight And Size Of Section Not Less Then As Specified Or As Shown In Drawing ,Locking Arrangement,Silicon Sealant ,Epdm Gaskets, Including All Aluminum Fixture And Fittings Etc. Complete . All Gaps Between Civil Work And Aluminium Frames Shall Be Sealed And Made Watertight By Applying Silicone Sealant.Rectangular Tube @0.478Kg/M , Providing And Fixing Of Aluminium Windows With Three Tracks And Three Shutters Sliding Windows With Tubular Frame Sections Powder Coated With Pure Polyster Powder Of Thickness 15-80 Microns With Approved Standard Acessories Such As Ball Bearing Rollers Concealed Lock, 6Mm Plain Clear Glass With Epdm Beading Etc. , Providing And And Laying Antiskid Floor Tiles 12 X 12 Upto 16 X 16 In Of Johnson, Somany, Kajaria (Thickness To Be Specified By The Manufacturer) Of 1St Quality Conforming To Is:15622 Of Approved Make In Shades As Specified Laid On 20 Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete A) Dark Shades , Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles (Johnson, Somany, Kajaria )Conforming To Is:15622 (Thickness To Be Specified By The Manufacture Of Approved Make In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand ) And Jointing With Grey Cement Slurry @3.3Kg Per Sq.M Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Wall Ceramic Glazed Tiles : 300 X 600 , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. C) 80 Mm Thick In All Colours Except Grey (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm.D) 80 Mm Thick In Grey Colour (M40 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In All Colours Except Grey (M35 Grade) , Providing And Laying Factory Made Shot Blasted Cement Concrete Interlocking Paver Block Of Minimum M35/M40 Grade Made By Heavy Duty Block Making Machine With Strong Vibratory Compaction And Of Aprpoved Size And Design / Shape Laid In 50 Mm Thick Compacted Bed Of Coarse Sand, Filling The Joints With Coarse Sand, Etc. All Complete As Per The Direction Of Engineer.- In I, Wave, Rectangular, Square Etc. Shapes. The Products Should Comply To Is 15658:2006 And Manfucatured By Iso9001: 2008 Certified Plant. The Shot Blasting Should Be Done Using 0.4-0.5Mm Dia Steel Shots With A Speed Of 3200 Rpm. 60 Mm Thick In Grey Colour (M35 Grade) , Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Of Any Colour And Shade, Area Of Slab Over 0.50 Sqm A) Jet Black , Providing 25 Mm Thick Cuddapah Slabs Machine Cut And Polished On Either Side In Partitions Including Making Necessary Grooves In The Wall And Fixing With Cement Mortar, Complete As Directed By The Engineer-In-Charge , Extra For Providing Opening Of Required Size & Shape For Wash Basin/ Kitchen Sink In Kitchen Platform, Vanity Counter And Similar Location In Marble/Granite/Cuddapah Stone Work, Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. , Kotah Stone Slab Flooring Over 20 Mm (Average) Thick Base Laid Over & Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing & Complete With Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 20 Mm Thick. , Providing And Laying Flamed Finish Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer : Flamed Finish Granite Stone Slab. Jet Black , Marble Stone Flooring With 18 Mm Thick Marble Stone (Sample Of Marble Shall Be Approved By Engineer-In-Charge) Over 20Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement:4 Coarse ) Using : , Providing & Fixing 18 Mm Thk Flame Finish Granite Tread Tiles In Single Piece In Approved Make And Colour With Rounded Off Nosing, Antiskid Groove Laid On 20 Mm (Average) Thick Bed Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) With Neat Cement Slurry Including Pointing With Pigmented Cement Slurry To Match The Shade Of Slab, Cleaning Etc. Complete. , Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Marble Tiles In Risers Of Steps, Skirtings, Dado, Walls And Pillars Laid On 12 Mm (Average) Thick Base Of Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) And Jointed With Grey Cement Slurry Including Rubbing And Polishing Complete With Kotah Stone Slab Flooring Over 20 Mm (Average Thick Base Of Lime Mortar 1:1:1 (1 Lime Putty : 1 Surkhi : 1 Coarse Sand) Laid Plain White Makrana Marble Slab 25 Mm Thick , Providing And Fixing Waterproofing Treatment To Sanitary Blocks Consisting Of Layers Of Laterite Stone Coba Of 75 Mm Thick In Cement Mortar 1:2 Sand Witched Between Two Layers Of Cement Mortar 1:4 (20 Mm Thick ) Mixed With Water Proofing Compound, Top Finishing Coat Of Cement Slurry 6 To 12 Mm Thick With Water Proofing Compound Etc. Complete With 32 Mm Dia Pvc Pressure Relief Pipe Of Adequate Length Including Waterproofing Treatment To 750 Mm Height (Maximum) Of Side Wall, And Bottom Surface In Cement Mortar 1:4 With Waterproofing Compound And Covering 10 Years Guarantee On Court Fee Stamp Of Rs. 100 With Ponding Test Including All Lead, Lift Etc. Complete As Directed By Engineer. , Providing & Fixing In Position Double Skin Roof With Zincalume/ Galvalume Colour Coated & Bare Profile Sheet With Subtle Square Fluting Factory Cut At All Heights For Roof, Side & Gable Cladding Complete In All Respect. Top Sheet-The End Rib Shall Be Designed For Anti-Capillary Action. The Feed Material Should Be Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 43.5% Zinc &1.5% Si) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides) With Quality Paint Coat As Per As/Nzs 2728 Type 3-4. The Paint Shall Have A Total Coating Thickness Of Nominal 35 Μm, Comprising Of Nominal 20 Μm Exterior Smp Coat On Top Surface And Nominal 5 Μm Reverse Backer Coat On Back Surface Over Nominal 5 Μm Primer Coat On Both Surfaces Of Approved Colour Shade. Total Coated Thickness (Tct) Should Be 0.50Mm. Total Painted Thickness (Tpt) Should Be In Addition To 0.50Mm. The Steel Sheet Shall Be Fastened With Nominal 40 Μm Zinc Coated Or Nominal 25 Μm Zinc-Tin Alloy Coated, Hex Head, Self-Drilling Screw As Per As 3566-2002 Class 3 Fasteners Of Approved Make With Epdm Washer As Per The Requirement Considering The Profile Shape And Design Load. The Fastener Size Shall Be Calculated As Per The Design Or Manufacturers Recommendations. The Profile Sheet, Fastener Size Etc. Shall Be Approved By The Engineer. The Sheeting Should Be With Minimum 200Mm Lap & Waterproof With Silicon Sealant Non-Hardening Neutral Cure Type Shall Be Applied At All End Laps, Complete As Directed Z-Sub Girt - Roll Formed Section 50X50x50x1.50 Tct, 120Gsm Galvanised, High Strength (345 Mpa), Approximate Wt. 1.85 Kg/R.M. Fixed With Self Tapping Screws Glass Wool Insulation With Fsk Facing 50Mm With 24 Kg/M3 Density In Between 2 Sheets. Liner Sheet-Bare Galvalume/Zincalume Roofing Sheet Of Same Profile As Top Sheet. The Feed Material Is Of Manufactured Out Of Nominal 0.45 Mm Base Metal Thickness (Bmt) (0.47 Mm Tct), Hi-Strength Steel With Min. 550 Mpa Yield Strength, Metallic Hot Dip Coated With Aluminium-Zinc Alloy (55% Aluminium, 45% Zinc) As Per As 1397 - Zincalume Az150 (Min. 150 Gms/Sq.Mt Total On Both Sides), Passivated & Resin Coated. The Feed Material Should Have Coil ManufacturerS Product Details Marked At Regular Interval For Confirming Genuinity Of The Material. Complete As Per The Directions Of The Engineer. The Steel Manufacturers Test Certificate For The Chemical & Mechanical Properties Of Steel Must Be Submitted For Approval Prior To Installation. , Add For Providing & Fixing Flashings -[Corners, Ridges, Valleys, Gable End & Trims] (Girth Upto 610Mm) Including All The Accessories Complete As Per The Directions Of The Engineer In Charge. , Providing And Fixing Prince Or Equivalent Make Pvc Swr Half Round Eaves Gutter With Bolts, Nuts And Flat Iron Brackets 40 X 3 Mm Size Complete. 140 Mm Nominal Size , Extra For Providing Flat Iron Bracket 50 X 3 Mm Size Instead Of 40 X 3 Mm Size With Necessary Bolts Nuts, Washers Etc. For Fixing A.C. Gutters To Purlins. , Extra For Providing And Fixing Prince Or Equivalent Make Pvc Swr Short Stop Ends For Socketed Half Round Eaves Gutters. 140 Mm Nominal Size , Providing Water Proofing Treatment Over The New Reinforced Cement Concrete Roofs Terrace Toilet By Spreading Cement Slurry Over The Reinforced Cement Concrete Slab And Laying Of 10Cms. Average Laterite Stone Ballast Coba With The Necessary Gradient For Easy Flow Of Rain Water And The Coba In Covered With Damp Proof Of Hindustan Water Proofing Co. Or Equivalent Jointless Water Proofing Plaster Of Mix 1:3 ( 1 Cement : 3 Find Sand), Finished Smooth With Wooden Trowel With False Marking Of 30 Cms Square. The Vertical Surface Of The Adjoining Walls Are To Be Treated Upto A Height Of 30Cms Including Rounding Of Junction (The Rate Includes For Complete Items Including Labour And Materials And Including Cost Of Initial Treatment Of Roof Slab As Follows. The Injunction Of Damp Proof Or Equivalent Compound With Cement Solution Will Be Given As And When Found Necessary For Filling Honey Comb, Cracks Etc. In The Reinforced Cement Concrete Slabs). Note: Cement Consumption 25 Kg/Sq.M. , 12Mm Cement Plaster 1:4 (1 Cement : 4 Fine Sand) , 6Mm Cement Plaster To Ceiling 1: 3 (1 Cement : 3 Fine Sand) , 18Mm Cement Plaster In Two Coats Under Layer 12Mm Thick Cement Plaster 1:5 ( 1 Cement : 5 Coarse Sand) And Top Layer 6Mm Thick With Cement Plaster 1: 3 (1 Cement : 3 Coarse Sand) Finished With Sponge. , Extra For Providing And Mixing Water Proofing Material Proportion Recommended By The Manufacturers. (A)12Mm Cement Plaster 1: 3 (1 Cement : 3 Sand) , Forming & Finishing The 20 Mm Groove In Plastered Surface & Repair The Edges As Per Specifications And Directions Of The Engineer In Charge. , Painting Three Or More Coats With Acryllic Exterior Paint Of Approved Brand And Manufacture (Such As Weather Shield,Apex) Including Applying One Coat Of Cement Primer And One Coat Of Surface Treatment Etc. Complete. , Wall Painting (Two Or More Coats) With Plastic Emulsion Paint Of Approved Brand And Manufacture On New Work To Give An Even Shade. , Painting (Two Or More Coats) With Synthetic Enamel Paint Of Approved Brand And Manufacture In All Shade Or New Work Over And Under Coat Of Suitable Shade With Ordinary Paint Of Approved Brand And Manufacture To Give An Even Shade , Providing And Applying White Cement Based Putty Of Average Thickness 1.00Mm Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Demolishing Reinforced Cement Concrete Work Including Stacking Of Steel Bars & Disposal Of Unserviceable Within 50 Mts. Lead. , Demolishing Laterite Stone Masonry In Cement Mortar Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Dismantling Steelwork In Built Up Sections In Angles, Tees, Flats And Channels Including All Gusset Plates Bolts, Nuts, Cutting Dismembering And Staking Within 50 Mts. Lead , Dismantling G.I. Sheets Roofing Including Ridges, Hips Valleys And Gutters Etc. And Stacking The Material Within 50 Meters Lead. , Dismantling Asbestos Sheet Roofing Including Ridges, Hips Valley And Gutters And Stacking The Material Within 50 Meters Lead. , Dismantling Tiled Roofing (Mangalore Or Pot Or Country Tiles) With Battens Etc. Complete Including Stacking Of Serviceable Material & Disposal Of Unserviceable Material Within 50 Mts. Lead. , Taking Out Existing cement concrete Interlocking Paver Blocks From Footpath/ Central Verge, Including Removal Of Rubbish Etc., Disposal Of Unserviceable Material To The Dumping Ground, For Which Payment Shall Be Made Separately And Stacking Of Serviceable Material Within 50 Metre Lead As Per Direction Of Engineer-In-Charge. , Carting Away Unwanted Excavated Material Such As Soil, Lime, Moorum, Building Rubbish, Laterite Stone, Excavated Earth, Ordinary Rock Etc. From Site Lead Of 5 Km Including All Loading & Unloading Charges ( A ) ( By Mechnaical Automative Transport ) Contractor Should Arrange Land For Dispose Up These Material At His Own Cost Lead Upto 5 Km. , Supplying And Fixing Pre-Cast Cement Concrete Kerb-Stones(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) Of M-20 With 20 Mm Nominal Size Granitic/Basaltic Aggregate Properly Consolidated By Mechanical Plat-Form And Vibrators With Smooth Finish Including Fixing At Site Complete As Per Specification. , Supply, Fabrication And Installing In Position Ms Gates Of Required Width And Height Of Including Wicket Gate And Rolling Gate(If Necessary) Of Approved Size Made Of Channels Joists, Angles, Plates, Pipes And Ms Sheets Including Stiffeners, Bracing, Fabricated Hinges, Ms Aldrops Locking Arrangement, Tempered Steel Pivots, Guide Track Of Ms Tee, Ball Bearing Arrangement, Casters Wheels Etc. All Complete As Per Drawing, Specification And As Directed By Engineering In Charge All Complete. The Main Entrance Gate Shall Be Fabricated Out Of Mild Steel Sections Completed With Applying A Priming Coat Of Approved Steel Primer And Two Coats Of Synthetic Enamel Painting. The Structural Steel Works For Gates Shall Include Supply, Fabrication, Transportation, Erection Of Structural Steel Gates Complete With Placing In Position Embedded Parts In Concrete / Brickwork And In Road Surface Including Cutting, Grinding, Drilling Of Holes, Welding And Painting Etc Complete , Constructing Soak Pit 1.20M X 1.20M X1.20M Filled With Laterite Stone Aggregate 125 To 180 Mm Including S.W. Drain Pipe 100 Mm Diameter And 1.2M. Long Complete As Per Standard Design. : , Providing And Fixing Weepholes With Rigid Pvc Make Laid In Position With A Required Slope And Level While Layingpipes Of Approved The Concrete Of Retaining Wall,Wing Wall And Earth Retainig Structure Complete As Directed By The Engineer In Charge A) 110 Mm Dia , Supplying And Fixing Of Precast Reinforced Cement Concrete Slabs(Factory Made,The Factory Should Be Iso Certified And Registered Under Dirctorate Of Industries, Govt. Of India) At Site In Concrete Grade Of M-25 With 20 Mm Nominal Size Granitic Or Basaltic Aggregate, Consolidated By Means Of Mechanical Platform, Vibration Etc. With Lifting Hooks Of M.S. 10Mm Bars And Pvc Cups Including Cost Of Reincforcement, Certificate From Manufacturer Shall Be Produced Indicating Grade Of Concret And Minimum Content Of Steel In The Product Along With 5 Year Free Replacement Warranty In Case Of Breakage Complete And As Directed By Engineer -In -Charge. Size 900 X 400 X 100 Mm With Steel Reinforcement Not Less Than 5.0 Kgs Per Unit -12 T Capacity , Providing & Fixing Of Reinforced Cement Concrete Gril Of Size 1.00 M X 0.6 M Ht Placed And Fixed On Coping Band For Compound Wall As Per Detailed Drawing Etc Complete , Construction Of Deepstambh Of Reinforced Cement Concrete Pillar With Exposed Laterite Masonary Of Octagonal Shape (1500Mm Length Of Each Side And Total Height Of 5500Mm) With Openings For Placing Diya Lamps And Foundation Platform Of Size (1800Mm Length Of Each Side And Height Of 1500Mm) Including Molding,Etc. As Per The Detail Drawings And As Directed By Engineer In Charge. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Paduka, Padma And Kumuda For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Piller At The Corner (Ht 4.50 Mt), Using 1:4 Mortar Mixture With Brick Chips, Featuring A 150Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Providing And Applying Decorative Plastering For Temple At Base Sorrounding(Adhopadma For Plinth), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 450 Mm Height And Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete. , Providing And Applying Decorative Plastering For Temple (Cornice Above Adhopadma ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Maximum 900Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2100Mm Height, 750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Mantap ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1500Mm Height ,750Mm Width, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Karnakuta ), Using 1:4 Morter Mixture With Bricks Chips, Featuring A 60Mm Height, 750Mm Width Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Yalli ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 300Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Small Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 750Mm Height, ( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple (Big Statue ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 1200Mm Height,( Maximum 4 Hands & 4 Ayaudhas ) Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Temple Small Stupi ( Bagil Paik ), Using 1:4 Morter Mixture With Bricks Chips,Featuring A Max 2400Mm X 2400Mm X 1800Mm Height, Including Custom Moulding Work As Details In Approved Drawings And Direction By Engineer Etc Complete (Including Labours, Materials And Scaffolding Etc) , Providing And Applying Decorative Plastering For Flowers At The Ceiling With Dia. 1.20Mt, Using 1:4 Mortar Mixture With Brick Chips, Featuring A 60Mm Offset, And Including Custom Moulding Work As Details In Approved Drawings And Direction By The Engineer. (The Job Involves Applying A Decorative Finish Over The Underlying Structure, Incorporating Special Decorative Features Etc Complete. , Plumbing Works , Proving And Fixing White Vitreous China Wall Hung Type (European Type) Water Closet With Seat And Lid With C.I. Brass Hinges And Rubber Fittings With Flush Valve Nelson/ Similar Fully Chromium Plated With Stop Cock, Wall Flanges, Flush Pipe Or Elbow And Vaccum Breaker Coupling Etc. Including Chair Bracket/Rag Bolts, Cutting & Making Good The Walls And Floors Where Required And Concealed Seat Support - W.C. Pan With White Plastic Seat And Lid , Providing And Fixing Hand Shower (Health Faucet) With 8Mm Dia, Abs/Brass Body With Double Lock 1.00M Long Flexible Tube (Brass Plated Stainless Steel Flexible Hose) And Wall Hook Of Approved Quality Confirming To Is Standards. (All Ewc Including Handicap Toilets) , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Two Way Bib Cock With Single Knob And Wall Flange Conforming To Is 8931:1993 15Mm Nominal Bore , Proving And Fixing White Vitreous China Water Closet Squatting Pan (Indian Type W.C. Pan) Size 580 Mm With 100 Mm Sand Cast Iron P. Or S Trap 10 Litres High Level P.V.C. Flushing Cister (Of Approved Make) With Fittings, Rack Bolts 32 Mm Diameter P.V.C Telescopic Flush Pipe With Fit Tings And Clamps 25Mm P.V.C. Over Flow Pipe With Specials & Mosquito Proof Coupling Of Approved Municipal Design And Nylon Pull Complete Cutting And Making Good The Walls And Floors Where Required Long Pan Pattern W. C. Pan , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Long Body Bib Cock With Wall Flange Jaquar Make Or Equivalent. Confirming To Is 8931;1993 For Orissa Pan. 15Mm Nominal Bore , Providing And Fixing White Vitreous China Flat Back Large Lipped Front Urinal Basin Of 590X375x390mm Size With Urinal Valve Auto Closing System With Built In Control Cock & Wall Flange With Fittings, Spreader, R.S. Or C.I. Brackets, Standard Size C.P. Brassl Flush Pipe And Spreaders With C. P. Brass Unions & C. P. Brass Clamps With Waste Fitting As Per Is 2556, Pvc Trap With Outlet Grating And Other Couplings In Cp Brass Complete, Including Painting, Fittings, Cutting And Making Good The Walls And Floors Where Required. - Range Of One Urinal Basin , Providing And Fixing Vitreous China Wash Basin With Rs Or C.I. Brackets Painted White, 15 Mm C.P. Brass Pillar Taps C.P. Brass Chain With Rubber Plug 32 Mm C.P. Brass Waste Of Pattern, 32 Mm Diameter M.I. Or C.P. Brass Trap And Union Complete, Flat Back Wash Basin Size 550 X 400Mm With A Single 15 Mm C.P. Brass Pillar Taps. , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Bottle Trap Economy Type 32Mm Jaquar Make Or Equivalent. Confirming To Is 8931;1993 , Providing & Fixing Liquid Soap Container With C. P. Brass Lid And Brackets Fixed To Wooden Cleats With C. P. Brass Screws Plastic Container , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 110Mm , Providing And Fixing Nahani Trap Of Rigid Pvc (Approved Make) For S.W.R. Pipes Including Lubricating Etc. Complete, Without Door : 75Mm , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 110Mm Dia , Providing And Fixing Rigid Pvc S.W. R. (Soil, Waste And Rain Water Drainage Pipes Of Approved Make Including Lubricant Etc. Complete (Single/Double) Socket-Ed : 75Mm Dia , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 110Mm , Providing And Fixing Rigid Pvc Bend Of Required Degree (Of Approved Make) For S.W.R. Drainage Pipes Of Approved Including Lubricating. 75Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 110Mm , Providing And Fixing Rigid Pvc Bend (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete Bend With Door : 75 Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 110Mm , Providing And Fixing Single Tee Of Rigid Pvc (Approved Make ) For S.W.R. Pipes Including Lubricating Etc Complete, With Door : 75 Mm , Providing And Fixing R.P.V.C. Vent Cowl: 110Mm , Constructing Brick Masonry Manhole Or Inspection Chamber With Second Class Bricks In Cement Mortar 1:5 (1 Cement :5 Fine Sand) Reinforced Cement Concrete Top Slab With 1:2:4 Mix (1 Cement: 2 Coarse Sand ;4 Graded Stone Aggregate 20Mm Nominal Size Foundation Concrete 1:2:4 Mix (1 Cement ;2 Coarse Sand :4 Graded Stone Agrregate 40Mm Nominal Size) Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement :3 Coarse Sand) Finished With A Floating Coat Of Neat Cemetn And Making Channels In Cement Concrete 1:2:4 Mix (1 Cement :2 Coarse Sand :4 Graded Stone Aggregate 20 Mm Nominal Size) Neatly Finished Complete As Per Standard Design. Inside Size 90 X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455 X610mm Internal Dimensions Total Weight Of Cover Ad Frame To Be Not Less Than 38 Kg. (Weight Of Cover 23 Kg. ) , Providing And Fixing Square Mouth S.W. Gully Trap Grade A Complete With C.I. Grating Brick Masonry Chamber And Water Tight C.I. Cover With Frame Of 300 X 300 Mm Size (Inside The Weight Of The Cover To Be Not Less Than 4.53 Kg.) And Frame To Be Not Less Than 2.72 Kg As Per Standard Design:. 150 X 100 Mm Size P Or S Type , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 32Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer. Internal Work - Exposed On Wall. Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 25Mm Outer Dia. , Providing And Fixing Astm Upvc Pipe, Conforming To Astm 2467 With Iso 14001, Including All Upvc Plain & Brass Threaded Fittings, Including Jointing Of Pipes & Fittings With One Step Upvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer. External Work.Sch-40(Blue)/(White) 50Mm Outer Dia , Providing And Fixing Non-Return Valve Of Approved Quality : 40 Mm Nominal Bore , Providing And Fixing Ball Valve ( Brass ) Of Approved Quality Low Pressure With Copper Floats 25 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 20 Mm Nominal Bore , Providing And Fixing Brass Full Way Valve (Heavy) Duty With Wheel Of Approved Quality : 25Mm Outer Dia. , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 15 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc 20 Mm , Providing And Fixing Chlorinated Ployvinyl Chloride (Cpvc) Pipes Confirming To Is:15778, Having Thermal Stability For Hot And Cold Water Supply Including All Cpvc Plain And Brass Threaded Fittings Including Fixing The Pipes With Clamps At 1 Mt. Spacing. This Includes Jointing Of Pipes And Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of The Engineer-In-Charge. Concealed Work (Medium Duty Sdr 13.5 Pipe) Including Cutting Chases And Making Good The Walls Etc25 Mm , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete 150 Mm , Conveying Carefully From Stack At Site, 250M From Both Sides Rolling And Lowering Into Trenches, Laying And Jointing True To Line And Level, Reinforced Cement Concrete Spun Pressure And Non Pressure Pipes Of Various Classes, Specials Including Collar And Perfect Linking Of Joint With Jack To Correct Position Including Cost Of Jointing Material In Cement Mortar 1:2, Necessary Hydraulic Testing, Curing Of Cement Mortar Etc. Complete. 150 Mm , Providing And Fixing Angular Stop Cock With Wall Flangue - Jaquar Make. Florentine (Flr-5053N) 15Mm Of Approved Quality. , Providing And Placing On Terrace Roof Of Floor Two (1St Flor Roof Single Piece Rotational Moulded Polythene Water Storage Tank Having I S I Mark And Conforming To I S 12701; 1996 1000 Lit. Capacity , Supply Of Inferential, Dry Dial, Type Domestic Water Meter,Suitable For Horizontal Installation, Duly, Sealed Against Tampering With Couplings At Both Ends Having Pulse Output Facility Compatable For Automatic Reading System ,Conforming To Is:779-1974 And Iso 4064-2005 Standards And Bearing Eec/Mid/Oiml Mark, (With Latest Amendments)Along With Test Certificate From Fcri/Nabl As Desired By The Department.25 Mm , Fixing Water Meter & Stop Cock In G. I. Pipe Line Including Cutting & Treading The Pipe And Making Long Screw Etc. Complete (Cost Of Water Meter And Stop Cock To Be Paid Separately) , Providing And Fixing Brass Bib Cock (Heavy) Of Approved Quality : 15 Mm Nominal Bore , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is 13983 Including Cutting Of Stone And Making Good The Walls Wherever Required. Kitchen Sink Without Drain Board. With Coupling & All Accessories Complete With Choke Stop Strainer, Plain Type Having Flat Borders For Correct Sandwithing Between The Plaform Top And Bottom Slabs Complete. Overall Size 610Mmx510mm (24X20) Bowl Size 545Mmx445mmx200mm (211/2X 17 1/2X 8) Depth 200 Mm. Glossy. 1.0Mm Thk, , Providing And Fixing Nickel Chrome Plated Copper Alloy Fancy Pillar Cock With Extended Lever Handle And Wall Flange Confirming To Is 8931; 1993 15Mm Nominal Bore , Electrical Works , Supply ,Installation,Testing & Commisioning Of 3 M High Galvanised Decorative Conical Step Pole With Decorative Light Single Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6 To 1M. In Length Along With Pole Cap Of 300Mm / Suitable Length And 80 Mm /Suitable Dia.(Suitable To Pole Top) Duly Welded With Provided Leads, And With Foundation Bolts Having Bottom Dia. From 105 To 141 Mm, Top Dia. From 65 To 77 Mm Complete With All Required Accessories Like Junction Box With 15A Input Output Connectors , 0.5 - 6 A C Curve Sp Mcb For Suitable For Each Light Fittings 3 Core 2.5 Sq. Mm Cu Flex. Cable For Light Fitting From Junction Box To Light Fittings And Its Termination Of Cables Should Be Made Using With Proper Lugs ,Pole Will Be Painted With P U Paint As Per Gtdc Color Choice .Etc.Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 40W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:40W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 4800Lm, Cri(Ra):80, Led Colour Temperature: 3000 To 5700K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of Architectural Pole Of 6Mtr Height Single Arm Made Of Galvanised Iron Sections Of 140Mm & 76Mm Dia. Wind Speed Considered In Design 50M/S, Is 875: Part - 3 :1987 .Material For Tubes Steel Of Grade Yst 210. Material For Base Plate Steel Of Grade E250 To Is 2062 ; 2011. The Bracket Will Be Provided With Reducer/Expander For Holding The Suspended Type Fixture On To The Main Pole With All Arrangements Having Position Perpendicular To The Ground. The Bracket Shall Be Single Arm On 6Mtr With A Span Of 1000Mm. The Bracket Top Shall Be Covered With Frp Cap To Enclose The Pipe. The Pole Will Be Placed With A Aluminium Embellishments On The Bottom & Middle Section For Aesthetic & Decorative Purpose. The Pole Will Be Provided With An Inbuilt Ip 65/66 Junction Box To Fix 32Amp Connectors & 6Amp Mcb Inside The Cut Window Of The Bottom Pipe The In Built Box Should Have A Flush Door Of Suitable Size. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 250 X 250Mm Having 12Mm Thickness. The Mounting Steel Plate Along With Hot Dip Galvanised Foundation Bolts Of Size M16 X 600Mm To Be Used For Ensuring Firm Grouting In The Specially Designed /Provided Reinforced Cement Concrete Foundation. The Galvanised Pole Should Be Painted In 3 Layer Coating (Coating Thickness Should Be More Than 50 Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint Of Matt Black On Pole And Golden On Aluminium Embellishment Or As Per Gtdc .Make-Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply,Installation,Testing,Commisioning Of 70W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of A Deep Drawn Chemically Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 70W Led. Fitting Should Be Suspended Mounting Type Fixture. System Wattage:70W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply. Led Lumens: @120Lm/W 8400Lm, Cri(Ra):80, Led Colour Temperature: 3000K, Life Span:59,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver With Efficiency 0.9 And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv. Ip65 And Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of Architectural Designed Pole Of 3Mtr Height Post Top Pole Made Of Galvanised Iron Sections Of 114Mm & 60Mm Dia. This Architecturally Designed Pole Is Structurally Sound. Windspeed Considered Should Be As Per Is875:Part 3:1987 ,Material For Tubes Steel Of Grade Yst210.,Material For Base Plate Steel Of Grade E250 To Is2062; 2011. The Pole Will Be Provided With An Inbuilt Junction Box To Fix 16-32Amp Connectors & 6-16Amp Mcb Inside The Cut Window Of The Bottom Pipe The Inbuilt Box Should Have A Flush Door Of Suitable Size With Allenkey Locking On Bothside. The Decorative Pole Will Be Mounted On A Square Base Plate Of Size 200X200mm Having 10Mm Thickness. The Base Plate Shall Have 4 Hole Suitable For M16/450 Foundation Bolts . The Galvanized Zinc Coat Should Not Be Less Than 65+/ 10Microns. The Galvanised Pole Should Be Painted In 3Layer Coating (Coating Thickness Should Not Be Than 80Microns Minimum) In Which 1St Layer With Etch Primer, 2Nd Layer With Epoxy Zinc Primer & 3Rd Final Layer With Pu Paint With Overall 100 +/- 10 Microns. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supply ,Installation,Testing & Commisioning Of 45-50W Decorative Luminaire Made Of Spun Aluminium Body With Pressure Die-Cast Heat Management (Pdchm) And The Ip65 Optical Compartment With High Power Led/S Is Comprised Of Polished And Co-Extruded, Thermoformed Polycarbonate Protector Stabilized Agent Uv Rays Suitable For 40-45W Led. Fitting Shall Be Post Top Mounting Type Fixture. System Wattage: 40-45W Led, Protection Class:Ip65, Driver Integral: Constant Current, Input Voltage: 230-240 Vac, Frequency: 50-60Hz, Operating Voltage:120- 277Vac, Operating Temperature: 0Deg To +50Deg C, Single Phase Ac Supply, Led Lumens:6000Lm, Cri(Ra):80, Led Colour Temperature: 4000K, Life Span:60,000 Hours,, Physical Body: Die Cast Aluminium Base, Body Spun Aluminium, Diffuser: Convex Type Translucent / V Translucent Polycarbonate Glass, Mounting: Suitable For 48Mm Od Pipe, Finish: Powder Coated Black, Driver Power Factor:0.95, Thd:7.8%,Surge Protection: 4Kv, Efficiency:87%. Fitting Should Have Inbuilt Driver And Having Surge Protection Device Of 4Kv And External Surge Protection Device Of 10Kv . Lm79-2019 Report To Be Provided. Make: Havells, Reytek, Suncity, La Luminie As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Of Concealed Type Step Light With 6W Led Lamp Die-Cast Aluminium Housing Having System Lumens Output Of Min. 500 Lumens, Min. Efficacy Of 100 Lumen/W, Cri80, Cct Upto 5000K, Beam Angle Of 110 Deg., Thd10%, Sdcm5, P.F. 0.95, Operating Range Of 230-270V, Surge Protection Of 2.5 Kv, Life Class Of 25,000 Hrs. At L70b50, Including Driver By Making Necessary Arrangement/Recess In Wall To Make It Flush With Surface ,Ip Rating : Ip 67 ,Ik10 Rated , Connecting Wire, Including Gear Box And Junction Box For Cable Connection Complete And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supply ,Installation Of Tree Uplighter With Spike,9W Led Lamp Complete With Ip66, 24Vdc, Suitable Watts Driver / Power Supply (If Any), Connecting Wire,.Complete With All Accessories And Coated With Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint .Make:- Havells,Reytek,Philips,Crompton,Leksa, La Luminaire, Wipro, Atilite, Nice. As Required As Directed By The Engineer In-Charge. , Supplying And Erecting Bulk Head Led Fitting Max. 10-12W With High Transitivity Diffuser With System Lumens Output Of Min. 1100 Lumens, Min. Efficacy Of 110 Lumen/W, Cri80, Cct Upto 6500K, Beam Angle Of 120 Deg., Thd0.95, Operating Range Of 140-260V, In Built Surge Protection Of 2.5 Kv, Life Class Of 50,000 Hrs At L70b50, Ip66, Ik09 Rated Including Driver Ip66, Ik09 Rated On Provided Pvc Block / Wooden Board With Accessories Complete. , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 2.5 Sq.Mm , Supply Of 3 Core Unarmoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 4 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Copper Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 4 Sq.Mm , Supply Of 3 1/2 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 1/2 Core 35 Sq.Mm , Supply Of 3 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 3 Core 16 Sq.Mm , Supply Of 4 Core Armoured Pvc/Xlpe Insulated, Pvc Sheathed Aluminium Conductor Cable Of 1.1 Kv Grade With Isi Mark Conforming To Is:1554(Part I) ,Is:7098(Part I) With Latest Amendments Of Following Size. 4 Core 16 Sq.Mm , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm In The Existing Rcc/Hume/Stoneware Metal Pipe, Etc. Complete As Required , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Exceeding 25 Sq.Mm But Not Exceeding 120 Sq.Mm Direct In Ground Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. (A) In Soily Strata , Laying Of One Number Additional Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm Direct In Ground In The Same Trench In One Tier Horizontal Formation Including Excavation In The Form Of A Trench As Per Cable Trench Drawing Provided By The Engineer-Incharge,Sand Cushioning With Screened Sand Bed Of 20Mm Thick , Protective Covering With Bricks Placed Breadth-Wise On Top Of Cable All Over The Run( The Brick Protection Shall Cover The Cable And Project Atleast 5 Cms Over The Sides Of The Cable) And Backfilling The Excavated Earth Without Stones Or Hard Material And Making The Surface Proper With 15 Cm Crown On The Top Complete As Required. A) In Soily Strata , Laying Of One Number Pvc Insulated And Pvc Sheathed/Xlpe Power Cable Of 1.1 Kv Grade Of Size Not Exceeding 25 Sq.Mm On Surface, Etc. Complete As Required , Construction Of Manhole Rectangular In Shape Including Cement Concrete 1:3:6 (1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20Mm Nominal Size) Foundation Thickness Of Concrete 20Cms And Offset 10Cms On Both Sides And First Class Brick Work With Bricks Class Designation 100Kg/Sq.Cm (Wire Cut Bricks) Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 23Cms Thick Including Providing & Fixing Ci Footrests Confirming To Is 5445/69 Or Revised And Whose Weight Shall Not Be Less Than 5.30Kgs Including Fixing In Man-Hole At 30Cm C / C In 20X 20X10cm Cement Concrete Block 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20Mm Nominal Size) And 12Mm Thick Plaster Inside And Outside With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Adding Waterproofing Compound Of Approved Brand In Cement Mortar With A Floating Coat Of Neat Cement And Making Channel In Cement Concrete 1:2:4 (1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20M Nominal Size) Neatly Finished Complete As Per Standard Design. Iii) Inside Size 0.60X0.60M And 0.60M Deep (With Medium Duty Di Manhole Cover & Frame Of Size 0.60X 0.60M Weighing 90Kgs ) Including Fixing With Cement Concrete 1:2:4 ( 1 Cement :2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size And Applying The Frame & Cover With Coal Tar.(Refer Quantity In Drawings) , Providing At Store Or Site Work Non-Pressure Reinforced Cement Concrete Pipes Of With Collar Joints Conforming To Is:458-2003 Revised As Per Amendment No.11 , Including Freight, Carting, Loading, Unloading, Stacking Etc. Complete. C) 150 Mm Dia.Np2 Class , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 1.5/2.5 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Copper Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 4 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 1/2 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 1/2 X 35 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 3 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 3 X 16 Sq. Mm. , Supplying And Making Cable End Terminations With Brass Compression Gland And Aluminium Lugs For Folowing Sizes Of 4 Core Pvc Insulated Pvc Sheathed/Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade, Complete As Required. 4 X 16 Sq. Mm. , Supply Installation, Testing And Commissioning Of Following All Outdoor Feeder Pillar-1/Panels Comprising Below Points. 1)-Panels Shall Be Fabricated Out Of 16/14 Swg Crca Sheet Steel, With Necessory Structural Supports In Form Of Structural Steel Sections. 2)-Floor Mounted (Include Stand), Ip-55 Degree Protection, Bottom Or Top Bus Duct Or Cable Entry As Per The Case & Bottom Cable Exit Steel, 2Mm Frame, 1.6 Mm Compartments & Tank Process Treated & 2- Times Epoxy Painted. 3)-Proper Gland Size Holes To Be Provided By The Manufacturer With Proper Sticker And Danger Sign On All Sides Of Panel. 4)-Current Density- 1.2 Ampere/1 Sq.Mm (Is-8623 For Factory Built Assembly). 5)- Earthing Terminal At Both End. 6)-Paint-- Exterior Enclosure Tank Process Treated & 1 Coat Of Epoxy Painted And 2 Coat Of Siemens Grey As Per Shade Ral7032 With Pu Paint For Exterior And Black For Base Frame , Everywhere Maintaining Micron Upto 75. 7)All Starters Are According To Type-Ii Cordination .8)Any Other Related Details As Per Engineer Incharge. Refer Single Line Diagram. Note : Excluding Stabiliser & Energy Meter Cost.Main Incomer - 25 To 100 A Tpn Mccb,Thermal Magnetic ,25Ka -2 Nos.4 Pole Power Contactor 16A To 25 A ,415V -2 Nos.Programmable Digital Almanac Astro Timer Switch With 10 Hrs Battery Backup -2 Nos. Outgoing - 6 A To 32 A, C Series Sp Mcb , 10 Ka-18 Nos. 6 A To 32 A, C Series Tp Mcb , 10 Ka -6 Nos.And Miscellaneous Items, Wire,Selector Switch , Cable Terminal Blocks Etc. Space Provision Only For 3 Phase Meter(300 X 400 ,Lxh) And Stabiliser . , Supply, Installation, Testing And Commissioning Of Electronic Type Three Phase Energy Meter (Kwh), 4 Wire, Isi Marked, In Polycarbonate Or Sgheet Steel Body ( Base Mounting Type) With Counter Display/Lcd Display, With Elt, In Class 1.0, 50 Hz, 240 V. Ac Duly Tested By Mrt Along With Test Certificates, Complete As Required Of Following Capacity Of Make L & T Only. (C) 50 To 100 A , Supply Of 3 Kva 3 Nos. Voltage Stabilizer ,Input Voltage Range (V ) =90-300 V ,Output Voltage (V ) =240 V ,Output Voltage Regulation = 1% Of Nominal Output Voltage,Automatics High & Low Voltage Cut Off Input And Out Put Voltage Circuit Protections, Single Phasing Preventer/Phase Reversal Protection,Over Load & Short Circuit Protection(Use Mcb),Independent Phase Control,Lcd /Led Display For Regulations Mode ,Bypass Mode & Fault Conditions,Automatic Bypass: A Fault Conditions,Protection Class : Ip 20 ,Ambient Temperature : 0 To 45 Degree Celsius ,Wave Form Distortion: Pure Sine Wave. , Supplying And Fixing Following Way Spn Sheet Steel Mcb Distribution Board Consumer Unit 240 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Hinged Front Acrylic Cover For The Mcb Knobs Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator) (B) 2 + 8 Way Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. A) Sp, Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required. B) Dp, Cat A , Supplying And Fixing Following Rating Double Pole (Single Pole And Neutral) 240 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Following Way Tpn Sheet Steel, Double Door, Horizontal Type Mcb Distribution Board 415 V On Surface/ Recess Complete With Tinned Copper Busbar Neutral Busbar Earth Bar Dinnbar Detachable Gland Plate Interconnections Phosphotized And Powder Painted Including Earthing Etc. As Required ( But Without Mcb/Rccb/Isolator)(C) 6 Way (8+18), Double Door, Horizontal Type Cat A , Supplying And Fixing 6 A To 32 A, C Series Mcb Suitable For Lighting And Other Loads Of Following Poles In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required.(E) Tpn, Cat A , Supplying And Fixing Following Rating Four Pole (Triple Pole And Neutral) 415 V Rccb Having A Sensitivity Current Upto 300Ma In The Existing Mcb Db Complete With Connections Testing And Commissioning Etc As Required (A) 25 A, Cat A , Supplying And Fixing Sp Blanking Plate In The Existing Mcb Db Complete As Required. , Supply , Installation , Testing And Commissioning Of Cable Junction Boxes Ip 66/67 Weather Proof(Size -155 X 210 X 92 (Lxbxh)Mm + Cable Termination Upto 16 Sqmm Size.), For Outdoor Installation(With Knockouts For Cable Entry) With All Accessories. Make: Hensel ,Neptune As Required As Directed By The Engineer In-Charge , Isolator 2 Pole 40A, Cat A , Earthing With Gi Earth Pipe 2 Mts Long 40 Mm Dia Medium Class With Isi Mark, Of Approved Brands Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking /Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) And Disposal Of Excavated Soil. B) Class B Gi Pipe, 40Mm Diameter As Per Specifications. C) Charcoal/Salt As Per Specs ( Paid Seperately). D) Refilling The Pit Of Size Not Less Than 1.0X1.0X 2.0 Mtrs(Min) With Soft Black Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe . G)Watering Arrangement(Plumbing Will Be Paid Seperately). (B) In Rocky Strata , Earthing With Gi Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories And Providing Masonry Enclosure With Ci/Rcc Cover Having Locking/Lifting Arrangement And Watering Pipe Etc. (But Without Charcoal Or Coke And Salt) As Required As Per The Earthing Drawing Provided By The Engineer-Incharge.The Scope Of Work Includes The Following: A) Excavation Of Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) And Disposal Of Excavated Soil. C)Watering Gi Pipe, 20Mm, Class B, With Funnel As Per Specs. D) Charcoal/Salt As Per Specs ( Paid Seperately). E) Refilling The Pit Of Size 1.0X1.0X 3.0 Mtrs(Min) With Soft Black Agriculture Soil Of Minimum Resistivity I/C Transportation. E)Masonary Chamber With Proper Foundation, Cover Plate And Locking Arrangement. F) Testing Of Earth Value With Earth Megger And Certifications Of Its Value. Aluminium Tag With Embossed Earthing Value To Be Attached To The Pipe.G)Watering Arrangement(Plumbing Will Be Paid Seperately). B)In Rocky Strata , Extra For Using Salt And Charcoal For Pipe Earth Electrode As Required( 65 Kgs Of Charcoal And 5 Kgs Of Salt). , Extra For Using Salt And Charcoal For Gi Or Copper Plate Earth Electrode As Required( 96 Kgs Of Charcoal And 5 Kgs Of Salt) , Supplying And Laying 25 Mm X 6 Mm Gi Strip At 0.5 M Below Ground As Strip Earth Electrode Including Soldering Etc. As Required , Providing And Fixing 25 Mm X 5 Mm Gi Strip On Surface Or In Recess For Coneections Etc. As Required , Supplying And Laying 6 Swg Gi Wire At 0.5 M Below Ground Level For Conductor Earth Electrode Including Soldering Etc. As Required , Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Recessed Pvc Conduit(Heavy) With Modular Switch, Modular Plates, Suitable Size Modular Gi Box Of Specified Category And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. A) Group B -- With Cat A Modular Accessories , Wiring For Group Controlled Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable (With)In Recessed Pvc Conduit(Heavy) And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. B) 2 X 2.5 Sq.Mm + 1 X 2.5 Sq.Mm Earthwire (20Mm Conduit) , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor Single Core Cable In The (With) Independent Recessed Pvc Conduit(Heavy) Of Appropriate Size As Required. (C) 2 X 4 Sq.Mm + 1 X 4 Sq.Mm Earthwire (20Mm Conduit) , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. B) 25 Mm , Supplying And Fixing Of Following Sizes Of Rigid Pvc Conduit Alongwith Accessories In Surface(Medium)/Recess(Heavy) Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. (C) 32 Mm , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) 5/6 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required (D) 3 Pin 5/6 A Socket Outlet Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required B) 15/16 A Switch Cat A , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate And Switch Box Including Connections But Excluding Modular Plate Etc. As Required D) 6 Pin 15/16 A Socket Outlet Cat A , Supplying And Fixing Modular Blanking Plate On The Existing Modular Plate Switch Box Excluding Modular Plate Etc. As Required A) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (A) 1 Or 2 Module ( 75 Mm X 75 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required B) 4 Module ( 125 Mm X 7 Mm) Cat A , Supplying And Fixing Following Size Modular Gi Box Alongwith Modular Base And Cover Plate For Modulator Switches In Recess Etc. As Required (C) 6 Module (200Mm X 75 Mm) Cat A , Supplying & Erecting Of Led 9 To 10W Tube Light Fitting (2 Feet) With Pc Housing, Heat Sink, Integrated Hf Electronic Driver Complete. Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 20 Led 40W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying & Erecting Of Ip 66 Led 20W Tube Light Fitting (4 Feet) With Aluminium Housing, Heat Sink, Integrated Hf Electronic Driver Complete.(Includes Suspension Accessories). Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supplying And Erecting Outdoor Type/Ip65 12W Ceiling-Mounted Led Downlight Having Extruded And Die Cast Aluminium Housing With High Corrosion Resistance Surface Finish With Integral Control Gear And Beam Angles - Narrow, Medium, Wide ,Complete With All Required Accessories .Make: Philips, Reytek, Leska, Crompton, Wipro, Havells As Required As Directed By The Engineer In-Charge , Supply And Erecting Of 12 Inch (300 Mm Sweep) Exhaust Fan With Double Ball Bearings, 1400 Rpm, Complete With All Accessories. (A) Cat A , Supply And Erecting Of 48 Inch ( 1200Mm Sweep) Ceiling Fan, Double Ball Bearing Type, , Complete With All Accessories. (B) Cat B , Supply And Erecting Fan Hook Box ( 100 Mm Diameter Or Equivalent Square Size, 75Mm Deep) Fabricated Out Of 16 Swg Sheet Steel With 10 M Round Bar Hook Bounded To Reinforced Cement Concrete Steel Upto 50 Mm Length Protruding On Each Side Of The Box, Including Painting With 2 Coats Of Red Oxide, Complete As Required. , Supplying And Fixing Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required (A) Cat A , Gi Pipe Medium Class 25 Mm (Civil Gsr 1034 (F)(Iii)) , Supply Of 2Kva ,1Ph In - 1Ph Out True Online Ups System In Standalone Configuration With Advance Dsp Based Technology Double Conversion Igbt Rectifier And Igbt Based Inverter Ups System With Cabinet And Smf Battery Backup For 60 Mins. Using 12V Batteries Including Battery Protection M.S Rack Suitable Dimension, Standard Rating Cable For Interlinks Cable And D.C Cable Up To Standard Length In Mtrs From Ups To Batteries Including Labour Charges For Installation Testing And Commission And Carrying Charges.(With Out Isolation Transformer)
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
28.
Defence #11261485 AOC
Bids Are Invited For Absorbent Cotton Roll Pkt Of 500 , Gas For Blow Torch Bottle Of 500 Ml , Smith Stainless Steel Arch Wire 24 Gauge 0 Point 4 Mm Soft , Smith Stainless Steel Arch Wire 26 Gauge 0 Point 4 Mm Soft , Nickel Titanium Erich Arch Bar , Micro Motor Straight Surgical Carbide Bur Hp 703 , Micro Motor Round Surgical Carbide Bur Hp 06 , Matrix Band Strips Tofflemire Wide 6 X 85Mm Pkt Of 12 Pieces , Matrix Band Strips Ivory Pattern Pkt Contains 12 Pieces , Barbed Broaches 0 To 6 Assorted Length 21 Mm , Bur Diamond Round Br 40 For Airotor Hand Piece , Bur Diamond Inverted Cone Si 47 For Airotor Hand Piece , Bur Diamond Straight Fissure Sf 31 For Airotor Hand Piece , Bur Diamond Flame Shape Fo 25 For Airotor Handpiece , Bur Diamond Flame Shape Fo 32 For Airotor Handpiece , Edta Gel With 10 Percentage Carbamide Peroxide Edta Gel For Root Canals Syringe Of 2G With Applicator Tips , Gum Paint Contains Tannic Acid Glycerine 27 Percentage W W Potassium Iodide Ip , Etchant Gel With 37 Percentage Orthophosphoric Acid In Syringe Of 1X5 Gm , Antiseptic Solution For Hand Hygiene Bott Contains Chlorhexidine Gluconate Ip 0 Point 5 Percentage W V Ethyl Alcohol Ip 70 Percentage , Desensitizing Mouthwash Contains Potassium Nitrate Bp 3 Percentage And Sodium Fluoride Ip 0 Point 2 Percentage Bott Of 100Ml , Polishing Paste For Dental Use Mint Flavor Pkt Of 75Gm , Chlorhexidine Mouthwash Bp Contain Chlorhexidine Gluconate 0 Point 2 Percentage W V Bott Contains 80Ml , Metapex Calcium Hydroxide With Iodoform Root Canal Filling Material , Nsk Turbo X Spray Plus Lubrication Spray Bott Contains 500Ml , Betadine Povidine Iodine Solution Ip 5 Percentage W V 500Ml , Mucopain Gel Contains Benzocaine Ip 20 Percentage W W In Water Miscible Base Tube Of 15 G , Mouthwash Contains Benzydamine Hydrochloride Bp 0 Point 15 Percentage Wv With Brilliant Blue And Tartarzine Yellow Color In Aqueous Base Bott Of 100Ml , Triamcinolone Acetonide Buccal Paste 0 Point 1 Percentage W W Kenacort Tube Of 7 Point 5Gm , Disposable Surgical Bouffant Head Caps Pkt Of 100 , Disposable Surgical Gown Pack Of 01 Gown , Inter Dental Brush Narrow Space Pkt Of 05 , Formalin Tablet For Vapour Sterilization Of Equipments Box Contains 100 Tablets , Denture Box , Denture Adhesive Powder Contains Cellulose Gum Zeofree Parabens Favours Bott Of 15Gm , Neo Endo Endodontic Niti Rotary Flex Files Length 21 Mm Taper 4 Percentage And 6 Percentage Set Of 6 , Neo Endo Endodontic Niti Rotary Flex Files Length 25 Mm Taper 4 Percentage And 6 Percentage Set Of 6 , Absorbent Cotton Ribbon Gauze Size 2 Point 5 Cm X 100 Mtr , Disposable Syringe 2Ml Pkt Of 100 , Disposable Syringe 5Ml Pkt Of 100 , Disposable Syringe 10Ml Pkt Of 50 , Disposable Syringe 20Ml Pkt Of 25 , Dental Floss With Grip Handle 50 Pcs In Box , H Files Size 15 Length 21Mm Set Of 06 , H Files Size 20 Length 21Mm Set Of 06 , H Files Size 25 Length 21Mm Set Of 06 , H Files Size 30 Length 21Mm Set Of 06 , Ketac Molar Restorative Glass Ionomer Cement With High Flexural Strength Pkt Contains 15G Powder 7 Point 8 Ml Liquid 01 Mixing Pad And 01 Plastic Scoop , H Files Size 15 Length 25Mm Set Of 06 , H Files Size 20 Length 25Mm Set Of 06 , H Files Size 25 Length 25Mm Set Of 06 , H Files Size 30 Length 25Mm Set Of 06 , Surgicare Disposable Sugical Rubber Gloves Size 7 , Surgicare Disposable Sugical Rubber Gloves Size 7 Point 5 , H Files Size 08 Length 21Mm Set Of 06 , H Files Size 10 Length 21Mm Set Of 06 , H Files Size 08 Length 25Mm Set Of 06 , H Files Size 10 Length 25Mm Set Of 06 , Miracle Mix Glass Ionomer Restorative Radiopaque Silver Alloy Glass Ionomer Cement Restorative Pkt Contains Powder 15G Liquid 10G Alloy 17G , All Purpose Calcium Hydroxide Paste Calcigel Pkt Of 04 Tubes , Temporary Filling Material Contains Eugenol Based Pkt Of 40Gm , Desensitizing Tooth Paste Tube Of 50G With Potassium Nitrate 5 Percentage W W Sodium Monofluorophosphate Usp 0 Point 7 Percentage , Gdc Mouth Mirror Tops Pkt Of 12 Pieces , Inj Lignocaine Hcl Without Adrenaline Contains Lignocaine Hydrochloride Ip 20 Mg Methylparaben Ip 0 Point 1 Percentage , Regular Glucose Energy Drink Powder Pkt Of 500G , Candid Mouth Paint Bott Of 25 Ml , Patient Drape Vinyl Reusable , Endodontic Niti K Files Length 21Mm Size 15 Set Of 06 , Endodontic Niti K Files Length 21Mm Size 20 Set Of 06 , Endodontic Niti K Files Length 21Mm Size 25 Set Of 06 , Absorbable Surgical Suture Usp Synthetic Vicryl 3-0 22Mm Half Circle Cutting Pkt Contains 12 Packs , Absorbable Surgical Suture Usp Synthetic Vicryl 3-0 20Mm Half Circle Round Bodied Pkt Contains 12 Packs , Absorbable Surgical Suture Usp Synthetic Vicryl 4-0 16Mm Circle Cutting Pkt Contains , Non Absorbable Surgical Suture Usp Mersilk 3-0 26Mm 3 By 8 Circle Reverse Cutting , Non Absorbable Surgical Suture Usp Mersilk 0-0 30Mm Half Bodied Pkt Contains 12 Packs , Non Absorbable Surgical Suture Usp Prolene 3-0 Monofilament Polypropylene Blue 22Mm Circle Convetional Cutting , Non Absorbable Surgical Suture Usp Prolene 4 Zero Monofilament Polypropylene Blue 17Mm Total Quantity : 2344
Contract Date: Ref. Documents Contract Value : 3.13 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 3
Uttar Pradesh View Result →
29.
Health and Family Welfare #11254887 AOC
Bids Are Invited For Condenser Blade - Material In Plastic Suitable For Split Ac 2 Ton Size 17Point5 , 4 Mfd Capacitor - Capacity Type 4 Mfd Material Type Copper Shape Type Round Connection Type Wired , Samsung Timer - Body Material In Plastic Voltage 120V In Refrigerator Samsung Timing Approx 9 Hours 40 Min Comp 12 Min Heater Product Capacity Above 250 Litres Of Double Door Refrigerator , White Wrapping Tape - Adhesive - Rubber Base Material - Pvc Type - Non Adhesive Suitable For Copper Clubbing Each Nos 15 Meters , Teflon Tapes - Material Poly Tetra Fluoro Ethylene Features Heat Resistance Each Nos 10 Meters , Cello Tape 2 Black - Colour Black Material Biaxially Oriented Polypropylene Uses Wrapping Of Ac Copper Pipes And Packing Purpose , Cotton Waste - Colour White , Danfoss Relay Set 20 Deep Freezer - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , 80 By 100 Mfd Capacitor - Capacity 80 By 100 Mfd Voltage 275 Vac 50 Hz , Minus 20 Deep Freezer Square Type - Fan Type Square Voltage 220 V, 50 Hz Wattage 65 Watts Heat Sink Material Copper , Pin Remover Charging - Item Is Valve Core Remover Installer Material Type Copper Service Ports Is 1 By 4Inch And 5 By 16 Inch Sae Female Bypass Ports Is 1 By 4 Inch Sae Male , Thermostat Minus20 - Model Wpf 20 250 V 4 Of 6A 50 Or 60 Hz Suitable For Minus20 Deep Freezer Vertical , Relay Danfoss - 103N0021 25Ohm 463 220V 240V , Capacitor 4 Mfd - Capacity 4Mfd 280 V Ac 10000H Ki 8 50 Or 60 Hz Material Shape Round Type , Condenser Fan Blade For 2 Ton Llyod Ac - Material Plastic Suitable For Split Ac 2 Ton Size 17 Point 5 , Pinch Pliers - Color Multicolor Primary Material Ss , T Handle 10Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Handle 12Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Sand Paper - Color Brown 80 Grit , 1 By 4Inch Ratchet - 3 By 16 Inch And 1By4 Inch Square X 1By2 Inch And 9By16 Inch Hex Ratcheting Refrigeration Wrench , Refrigerant Recovery Plier - 1By4 Sae Interface Material Ss , Allen Key Set In Inches - Item 10 Pack Of Allen Key Material High Grade Alloy , Cold Room Evaporator Fans - Make Hi Cool Model 4E 450S 230 V 50 Hz 1Point15a 155 Or 250W 1350 R By Min Axial Fan Motor Warranty 1 Year , 8 Mfd Capacitor - Body Material Metal, Connection Type Wired Voltage 440 Vac 50 Hz , Nose Pliers - Make Taparia Material Carbon Steel Handle Material Plastic Rubber Steel , Wire Cutter - Harden 7Inch Professional Electric Wire Cutter Stripper Made Of Zinc Alloy And Supports Wire Diameter Range 4 Mm Features Cut And Stripping Line Two-In-One Product Combined With Cut Line And Stripping Two-In-One Powerful And Durable Ergonomic Designed Handle Multipurpose Wire Stripper Under The Tangent Mouth Design Tangent Convenient Sharp And Durable Save Labor Force Spring Design Mached With A Length Of 47Mm Gun Mouth Convenient And Quick Efficient Adjustable Knob Wire Stripping Force Can Be Adjusted By The Knob Size To Avoid Excessive Damage To The Wire And Cable Ergonomic Handle According To The Human Body Design Feel Comfortable And Durable , Charging Line R32 - Make Value Material Brass 3Pc Charging Hose Suitable For R32 Gas Charging , Two Way Manifold Gauge With Box And Hose - Make Value Model No Vmg2 R410a 02 Pressure Range 30 500Psi Low 0 800Psi High Hose Red And Blue And Yellow 1By4inch 1By4inch 3X1pc , 46 Pcs Set - Make Stanly 46Pcs 1By4 Inch Drive Box End Socket Set Metric Ratchet Wrench Set With 4 To 14Mm Cr V Sockets S2 Bits Extension Bars Material Ss , Cylinder Key - Material Ss , Tourch For Butane Gas Cylinder - Make Clix Nozel Single , Swaging Tools - Swage For 1By4inch 5By16inch 3By8inch 1Byinch 5By8inch 3By4inch 7By8inch , Rough File With Handle - Make J K Thickness 3 Mm Material High Carbon Steel Width 12 Mm Length 100 Mm , Double End Spanner Set 6X32 Mm - Make Taparia Size 6Mm To 32 Mm Type End Type , T Set 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , T Set 14Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber , Drain Line Spring - Length 30 Meters Material Steel Color Silver Packaging Size 30 Meters , Single Gauge High Side - Make Value Model Vmg 1S H Pressure 0To800 Psig Material Brass , Measuring Tape 5 Meters - Make Stanly Coating Tylon Blade Lengh 5 Meters Body Material Rugged Rubber , Expansion Valve For Cold Room - Make Model Erse 4C Body Machined Brass Bar Seat Brass Port Machined In Body Pin Stainless Steel Pushrod Stainless Steel Type Of Joints Knife Edge To Metal Connections Odf Copper Fittings Silver Soldered To Body Inlet Strainer No Strainer Suitable For R 22 Refrigerant , Condenser Motor - Make Llyod Model Ydk68 6Bl Kw68b Rpm 900 Rotation Ccw , Condenser Blade - Material Plastic Suitable For Split Ac 1Point5 Ton Size 16Inch , Capacitor 3 Mfd - Body Material Plastick Connection Type Wired Voltage 440 Vac 50 Hz Capacity 3Mfd Shape Round , Digital Temp Meter - Make Hitcahi Model No Hd 306 Humidity Range 0 To 100 Rh Temperature Range Minus20c To Plus200c) Warranty 1 Year , Samsung Heater - Uses Refrigerator Heater Size 14 , Timer - Model Td20 Csa Power 220V 50 Hz Number Of Terminals 4 , Condenser Fan Blade - Material Plastic Suitable For Split Ac 2 Ton Size 17Point5inch , Valve 3By8inch Hand Shut Off - One Side 1By4inch Male Flare Other Side 3By8inch Male Flare Material Fully Brass With Handle , Cylinder Valves - Model Cga 320 Type Handle Material Brass Outlet 1/4Inch , Condenser Motor - Ge Motor Cpn 2Az0 10To 090Coma 920 Rpm Cwse 1By5 Hp , Fan Blade - Material Aluminum Suitable For The Ge Motor Cpnto2az0 To10to090 Size 19Inch , Hand Cutter Blade Iron - Size 4Inch 107X1point0x16 Mm 4Inchx3by64inchx5by8inch 15300 Rpm Double Net Max Speed 80 Ms Metal Cutting Wheels , Adjustable Wrench 6Inch - Make Taparia With Rubber Grip Size 6Inch , Adjustable Wrench 8Inch - Make Taparia With Rubber Grip Size 8Inch , Adjustable Wrench 12Inch - Make Taparia With Rubber Grip Size 12Inch , Allenkey Set Mm - Item 10 Pack Of Allen Key Set Material High Grade Alloy , Flaring Tools Set With Box - 1 X Flaring Tool 1 X Inch Pipe Clamp 1 Xmetric Pipe Clamp 1 X Pipe Cutter 1 X Pipe Deburring Tool Material Ss , Smooth File With Handle - Make J K Size 10Inch Width 25 Mm Thickness 5Point8 Mm , R22 Charging Line - Make Value Material Brass 3Pc Charging Hose Suitable For R22 Gas Charging , T Handle Only 1By4inch - Handle Length 12Inch Material Ss , Multitec Screw Driver - Ph1 And S5 Ph0 And S3 In Reversible Configuration Chrome Plated Finish , T Handle 8Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 8Inch , T Handle 11Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 11Inch , T Handle 13Inch - Type T Socket Spanner Length 300 Mm Socket Type Hexagon Material Steel Grip Rubber Size 13Inch , Tube Cutter - Make Value Model Vtc-42 Tube Diameter 1By4inch 1 5By8inch 6 To42 Mm , Flare Nut 3By4inch - Material Brass Size 3By4inch , Square Type Condenser Fan Motor - Power 230 V Watts 36W Rpm 1500 Rpm With Stand And Blade , Tong Tester With Probes And Leather Cover - Make Fluke Model 302 Type Digital Ac Clamp Meter Jaw Opening Size 30 Mm Voltage Range Dc 0To600v Current Range Ac 0To400 A Voltage Range Ac 0To600 V Power 2 Aa Batteries 1Point5v Resistance Range 4000 Ohm Warranty 1 Year , Screw Driver Long - Make Taparia Model 931 Type Long Handle Tip Type Phillips Usage Household Product Type Screwdriver , Hammer With Wooden Handle - Make Taparia Made From High Grade Chrome Vanadium Steel Is 841 1983 Weight 500 G Type Ball Pein , Cutting Plier - Maketaparia Model 1621To8or1621to8n Combination Pliers , Tube Cutter Small - Cutter Size 1By8inch To 5By8inch Material Ss , Hexa Frame With Blade - Make Stanly , Evaporator Fan Motor For Lg Refrigerator - Make Lg Electronics Model Rda082e03 Rohs Pno Eau41681402 Ac230v Or 50 Hz 0 Point 20 By 1300T Refrigerator Model No Gl 365Yvqg5 Dsuzebn , Condenser Copper Coil Make Llyod - Copper Condenser Coil For The Llyod 1Point5 Ton Ac Size 20X30 Inch , Filter - Material Copper Type 2 Way , Single Pressure Gauge High Side500psi - Make Wikai Pressure Range 0To800 Psig Material Brass , Gauge Value - Make Value Model Vmg1slr32 Pressure 0To350 Psig Material Brass , Danfos 20 Relay Olp Set - Connector Type Through Hole Contact Type Normally Open Mounting Type Din Rail Mount Operation Mode Automatic , Try Square Set - Size 6Coma8coma10 Inch Material Carbon Steel Blade 90 Degree Heavy Duty Right Angle Ruler , Valve Core Removal Tool - Item Valve Core Remover Installer Material Copper Service Ports 1By4 Inch And 5By16inch Sae Female Bypass Ports 1By4inch Sae Male , Digital Vernier Callipers With Batteries - Material Stainless Steel Measurement Accuracy Plus Or Minus 1Percent , Siron Soldering Iron Set - Make Siron Model Dss60 Voltage 24V Power 60W Temperature Range 150 To 480 Degree Centigrade , Soldering Wire - Package Spool Type Wire Solder Wire Gauge 24 And 25 Awg Process Leaded Weight 500G , Compressor Cable Kit - Cable Feature Heat Resistance Features Both Side Clips Each Wire 2Point 5 Sq Mm Copper Cable , Handset Valve 1By4inch - One End 1By4inch Sae Female Flare The Other End 1By2 Acme Male , Cuppler - Size 1By4inch And 3By16inch Material Ss , 24 Socket Wrench Set Ratchet - Make Stanley Piece 1By2 Inch Drive Sliding Tee 1 Piece 1By2 Inch Drive Universal Joint 18 Pieces 1By2 Inch Drive 6 Point Sockets 10 Mm 11 Mm 12 Mm 13 Mm 14 Mm 15 Mm 16 Mm 17 Mm 18 Mm 19 Mm 20 Mm 21 Mm 22 Mm 23 Mm 24 Mm 27 Mm 30 Mm 32 Mm Box Included 1 Piece 1By2 Inch P9 Ratchet 2 Pieces 1By2 Inch Drive Extensions 130 Mm And 250 Mm 1 Piece 12 Inch Drive Spark Plug Socket 21 Mm , Pin Valve - Valve Type Pin Valve Exterior Finish Copper Outlet Connection Flange Material Copper 1 Packet 10 Nos , Charging Line Handle - Air Conditioner Refrigerant Angled Ball Valve 1By4inch Sae For R410a R134a R12 R22 Ac Hvac With R410a Adapter R134a Refrigerant Adapter Valve Core Thimble Remover For Mini Split System Material Brass Inlet Connection Size 0Point25 Inches Inlet Connection Type Npt Outlet Connection Type Sae Number Of Ports 3 Outlet Connection Size 0Point25 Inches Valve Type Ball Valve , Capacitor 50 Mfd - Capacity 50 Mfd Material Non Pcb Shape Round Mounting Type Internal , 3 Way 30 Amps Connector - Current Ratings 30 Amps Connector Type Screw Material Bakelite High Current Capacity , Ss Tank Nipple 1By2inch - Material Brass Thread Size 15 Mm Item Dimension Lxwxh 15 X10 X 5 Cm , Pvc Connection Pipe 1 By 2 Inch - 24 Long Brasstail Nut Connection Pipe With White Pvc 15Mm 1By2 Inch Hosepipe 60Cm , Ro Water Purifier T Type Tap - Colour Blue For The Ro Water And Material In Plastick , Ro Water Purifier Tap Tank Kent Type - Color Blue Material Plastick , Charging Line Rubber - High Quality Grade Rubber 1 Packet Equalto 50 Nos , Pipe Wrench 16Inch - Make Taparia Model 1273To12 , Bearings - 6201Z , Oil Seal - 25 47 7 A 1 Oil Seal Rajson Enterprises , Ss Breazing Roads - World Class Welding Electrodes Super Stainless Steel 308L Size 3Point15 X 350 Mm , Bluestar Indoor Blower For 1Point5 Ton Sac - Length 25Point3 Inch , Line Tester - Make Taparia Model 813 , Screwdriver Small - Make Multitec Model R6100i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 150Mm , Screwdriver Large - Make Multitec Model R6250i Type Insulated Shank Size Hexagon 6 Mm Length Of Bit 300Mm , Handle T - Make Taparia Model Takm9 , Jet Pump Handle Small - Hoselength 8M And Waterflow Rateof 8 Lperh Portable Maxium Pressure 300Bar , Araldite 500Gms - Weight For 180G The Each , Double Ended Ring Spanner Set - Make For The Taparia Size 6Mm To 32 Mm Type Ring Type , Single Guage Low Pressure For Vaccume - Make Value Model Vmg 1 S L Pressure 0To350 Psig Material Brass Suitable For R22 Refrigerant , T Type Handle Spanner Set - This Set Includes Seven Metric Sizes 8 10 12 13 14 17 And 19 Mm T Handles , Continuity Tester Compressor Check - Power Source Battery Style Digital Sound Yes Beep , Servicing Covers - Material Polyvinyl Chloride Color Blue Or Black Water Resistant Yes , Compressor For 345 Liters Refrigerator - Make Samsung Or Equivalent Model Number Mk172k S1u Refrigerant R134a Phase Single Type Rotary Warranty 1 Year , Electrical Relay - Relay With 5 Mfd Capacitor , Compressor For Minus20 Deep Freezer 320 Liters - Make Voltas Or Equivalent Model Number F60nl Refrigerant R290 Phase Single Warranty 1 Year , Compressor For 165 Liters Bpl Make Refrigerator - Makebpl Or Equivalent Model Number Sl19j-5 Refrigerant R12r134a Phase Single Warranty 1 Year , Compressor For Minus20 Deep Freezer 350 Liters - Make Danfoss Or Equi Model Nl9f And Refrigerant R134a Phasesingle And Warranty 1 Year , Filter Drier Pencil Type - Material Copper Type 2 Way For 134A Refrigerant For Minus20 Deep Freezer , Compressor For -20 Deep Freezer 500 Liters - Make Danfos Or Equivalent Model Numbersc12g Refrigerant R134a Phase Single Warranty 1 Year , Compressor For 1Point5 Tr Split Ac Rotary Type - Make Sci Or Equivalent Model Number- Rh313vamt Refrigerant R22 Phase Single Type Rotary Warranty 1 Year , Side Dummy Nuts 5By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 5By8inch , Side Dummy Nuts 1By2inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By2inch , Side Dummy Nuts 1By4inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 1By4inch , Side Dummy Nuts 3By8inch - Material Brass Suitable For Outdoor Unit Service Valve Color Yellow Brass Size 3By8inch , Dummy Nuts 1By4inch - Hexagonal Brass Forged 1By4inch Flare Dead Nut , Ductable Split Ac Indoor Blower - Size 226X155 Suitable For 5Point5 Tr Duct Able Ac , Rubber Bushes - Type Star , Minus20 Deep Freezer Compressor - Make Embraco Or Equivalent Model Nek2150gk Warranty 1 Year , Drier Cum Filter - Make Danfoss Model 023Z5004 Size 1By4inch Brazing Type , Refrigerant R 600A - Make Godrej Of Skf Specific Name R600a Gas Type Hydrocarbon Packaging Size 200G , Hand Shut Valve For R600a Portable Cylinder - Material Brass R600a Gas Can Tap Valve With Handle Uses For Portable Gas Cylinder , Water Pipe Pvc - Flexible Water Pipe Pvc Durable Flexible Ant Kink , Acetylene Cylinder Regulator - P1 Equalto 30 Bar P2 Equalto 4 Bar Q1 Equalto 1Point9 M Per H Two Stage Gas Regulator Pressure , Oxygen Cylinder Regulator - P1 Equalto 100 Bar P2 Equalto12 Bar Q1 Equalto 30 M Per H Two Stage Gas Regulator Pressure , Hose Pipe For Acetylene - Color Red Material Rubber Brass Iso Standards , Hose Pipe For Oxygen - Color Red Material Rubber Brass Iso Standards , Torch For Oxygen Acetylene Cylinder - Uses Brazing Of R And Abyc Equipments With Iso Standards , Clamps For Hose Pipes - Size 1By2 Inchs Material Brass Uses For Hose Pipe Clamping , Hand Hacksaw Bladed - 14Inchx1inch 0 Point 050 , Axial Fan Motor For Hitachi 16Point5 Ton Ac - Make Hicool Model 4D 630S Size 25Inch 630Mm Voltage 415 Vac Power 815 Watt Current 1Point6 Amps Speed 1320 Rpm Air Direction Suction Warranty 1 Year , Compressor For Ice Machine 120 Kg Per Hr Production - Make Cubigel Or Equivalent Model No Gp14tb Refrigerant R134a Power 3By8 Hp , Filter Cum Drier - Type Brazing Size 1 By 4Inch , Compressor For Bluestar Split Ac 1Point5 Ton - Make Mistubishi Ics Or Equivalent Model Rh313vadt Refrigerant R22 Capacity 1Point5 Ton , Capacitor 45 Mfd - Capacity 45 Mfd Material Non Pcb Shape Round Mounting Type Internal , Capillary Tube Gauge - Make Refco For Measuring Capillary Inside Diameters , Soldering Liquid Flux - Uses For Stainless Steel & Multi Metals Soldering Packaging Size 100Gm , Blower For Lloyd Make Split Ac 1Point5 Ton - Size 34 1By4inch Or 87 1By2inch Cm Suitable For 1Point5 Ton Lloyd Split Abyc , Pvc Pipe 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Bends 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Pipe 1Inch - Size 1 Inch Material Pvc Conduit Color Grey , Pvc Bend 1Inch - Size 1Inch Material Pvc Conduit Color Grey , Clamps 3By4inch - Material Upvc Size 3Byinch 1 Packet 100 Nos , Clamps 1Inch - Material Upvc Size 3By4inch 1 Packet Equalto 100 Nos , Pvc T Joint 3By4inch - Size 3By4inch Material Pvc Conduit Color Grey , Pvc Solvent - Hp 901 Pvc 50 Ml Packaging Size 50 Ml , Cutting Machine Blade - 105 Mm 105X1x16 , Vc T Joint 1Inch - Psize 1 Inch Material Pvc Conduit Color Grey Total Quantity : 655
Contract Date: Ref. Documents Contract Value : 10.10 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 1
Contract Date: Ref. Documents Contract Value : 83.98 Lakh
Boards / Undertakings / PSU No of Bidders 5
Uttar Pradesh View Result →
31.
Rural Development #11250007 AOC
Tender for Providing, Erecting And Supplying Various Different Electric Material For 1 Year @Gr Anchayat Kadamwakwasti , Electric Material This Rate Please Mentioned Include Gst Invoice Shall Be Prepared With Gst Tax Whatever Applicable On Material Rate Are Mentione With Gst , Supplying And Erecting Modulartype Switch6a / 10A Isimark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete. , Supplying & Erecting Ms Pole Bracket For Guarding/Lt Oh Line, Fabricated From Angle Iron 50X50x6 Mm And 550 Mm Long For Necessary Nos. Of Provided Insulators And Erecting On Pole With 50X6mm Clamp Complete As Per Specification No. Oh -Pl/Bkt , Making Cement Concrete Foundation Including Excavation (60 X 60 X 150) Cm Deep In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, (45 X 45 X 45) Cm /45 Cm Dia. X 45 Cm Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. (Above 6 M To 9 M Poles) , Supplying And Erecting Steel Tubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness (4.5 + 1.75 + 1.75M) Length Respectively And Total 6 M Long With Pole Cap, Base Plate In Provided Foundation.(Weight 101 Kg.) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 139.7 X 114.3 X 88.9 Mm. Dia With 4.5X3.65X3.25 Mm Thickness (4.5 + 1.75 + 1.75M) Length Respectively And Total 8 M Long With Pole Cap, Base Plate In Provided Foundation.(Weight 101 Kg.) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm. Dia With 4.5 X 4.5 X 3.65 Mm Thickness ( 5 + 2 + 2M ) Length Respectively And Total 9 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 147 Kg) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm Dia With 4.5 X 4.5 X 3.65 Mm. Thickness (5 + 2.5 + 2.5 M) Length Respectively And Total 10 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 160 Kg) As Per Specification No. Oh-Pl/Stp , Supplying And Erecting Steel Tubular Swaged Pole 165.1 X 139.7 X 114.3 Mm Dia. With 4.5 X4.5 X3.65 Mm Thickness (5.60 + 2.7 + 2.7 M) Length Total 11 M Long With Pole Cap, Base Plate In Provided Foundation (Weight 175 Kg.) As Per Specification No. . Oh-Pl/Stp , Supplying And Erecting Street Light Bracket For Erection Of Single Fitting On Tubular Welded Pole With 40 Mm. Dia 1.0 M Long B Grade G.I. Pipe Along With Pole Cap Of 125Mm Dia 600 Mm Long Duly Welded As Per Specification No. Fg-Bkt/Bpc , Supplying, Erecting & Marking Dpmcb 40A To 63A, B- Series (For Lighting) In Provided Distribution Board As Per Specification No. Swswr/Mcb , Supplying And Erecting Insulated D.P. Switch Surface Type/Flush Type 32A 240Vwith Indicator Lamp & Fuse , Supplying And Erecting Programmable Digital Almanactimer Microcontroller Based With Real Time Clock To Operate On Derived Switching On & Switching Off Street Light As Per Daily Sunset And Sunrise Respectively , Supplying Pvc Insulated Pvc Round Sheathed 1.5 Sq.Mm (30 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv , Supplying And Erecting Pvc Insulated Pvc Round Sheathed 2.5 Sq.Mm (50 No. X 0.25 Mm Dia.) 3 Core Flexible Multi Stranded Copper Industrial Cable For Voltage Grade Up To 1.1 Kv , Supplying And Erectingled Street Light Fitting Suitable For 26W To 36W Led Street Light, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Bajaj , Supplying And Erecting Led Street Light Fitting Suitable For Above 40W To 48W Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification No Bajaj. Fgodf/Fls2. , Supplying And Erecting Led Street Light Fitting Suitable For 60W Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete As Per Specification Bajaj No Fg Odf/Fls-2. , Supplying And Erecting Led Street Light Fitting Suitable For Above 70W- 75 Lamp, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls2 , Supplying And Erectingled Street Light Fitting Suitable For 90 W Led Street Light, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Bajaj , Supplying And Erecting Led Street Light Fitting 100W, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2. , Supplying And Erecting Led Street Light Fitting 120 W, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2. , Supplying And Erecting Led Street Light Fitting 150 W, Including Lamp, With providing fixing 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2 , Supplying And Erecting Led Flood Light Fitting Of 120W, Including Lamp, With providing fixing 0.95,Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg Odf/Fls-2 , 2-5-17 Supplying And Erecting Led Flood Light Fitting Of 150W, Including Lamp, With providing fixing 0.95,Class Ip 65 And Above Housing Of Pressure Die Cast Aluminium Alloy And Heat Sink Extruded Aluminium Complete Per Specification Bajaj No Fg-Odf/Fls-2 , Supplying And Erecting Street Light Bracket Made From 40 Mm. Dia ‘B Class G.I. Pipe, 0.6M. In Length Along With Pole Cap Of 300 Mm Length And 80 Mm Dia Duly Welded With Provided Leads As Per Specification Jno. Fg-Bkt/Bpc(2-9-2) , Supplying And Erecting Street Light Wall Bracket Made From 25 Mm. Dia ‘B Class G.I. Pipe 1.2 M In Total Length Complete As Per Specification No. Fg-Bkt/Wb(2-9-3) , Supplying & Laying Pvc Armoured Cable 4Core 6Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 10 Sq Mm 7-1-15 , Supplying & Laying Pvc Armoured Cable 2Core 10 Sq Mm , Supplying & Laying Pvc Armoured Cable 2Core 6 Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 16 Sq Mm , Supplying & Laying Pvc Armoured Cable 4Core 25 Sq Mm , Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 70 Sq. Mm. Aluminium Conductor , Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 95 Sq. Mm. Aluminium Conductor , Supplying, Erecting & Terminating Xlpe Armoured Cable 3½ Core 120 Sq. Mm. Aluminium Conductor With Continuous , Supplying, Erecting & Marking Spmcb 6A To 32A, B- Series (For Lighting) , Supplying, Erecting & Marking Dpmcb 6 A To 32 A Bseries (For Lighting) , Supplying, Erecting & Marking Fpmcb 40A To 63A In Provided Distribution Board , Supplying & Erecting Crimping Type Aluminium Lugs For Cable Upto 16 Sq Mm Complete , Supplying & Erecting Crimping Type Coper Lugs For Cable Upto 1.5 To 6Sq Mm Complete... , Supplying And Erecting Two Pole Power Contactor 250V 32A For Time Switch Complete Erected On Wooden Block/Provided Box, With Necessary Materials. , Supplying & Erecting Mains With2x1.5 Sq.Mm F.R Copperpvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole , Supplying & Erecting Mains With 2X4 Sq.Mm F.R Copper Pvc Insulated Wire Laid In Provided Conduit/Trunking/Inside Pole/Bus Bars Or Any Other Places. As Per Specification No: Gma/Bw , Supplying And Erecting Mains With Isi Mark Wp2 X 6 Sq. Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire No. 8 Swg 1-4-3 , Supplying And Erecting Mains With Isi Mark Wp2 X 2.5 Sq Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire , Supplying And Erecting Mains With Isi Mark Wp2 X 10.00 Sq Mm. 1100 V. Grade Aluminium Pvc Insulated Pvc Sheathed Wires On G.I. Bearer Wire , 25 Amp, 32 annual periodical maintenance Three Phase L/T Contactor , Insulation Tape , Water Proof Tape , Cable Joint Kit Upto 25 Sq. Mm Cable , Cable Joint Kit Upto 35Sq. Mm To 95 Sq Mm Cable , Cable Joint Kit Upto 120Sq. Mm To 185 Sq Mm Cable , Cement Street Light Pole Clamp With Nut Bolt , M.S. Street Light Pole Clamp With Nut Bolt , Servicing And Primary Maintenance Of Street Light Pole 1 Visit Per Month Pole Included And Also Call Basis. Checking All Wire Connections, Nut Bolt Tighting, Lugs Connection. Old Light Changing & Service Wire Conection Labour Works Etc. , Supplying And Laying (Including Excavation Of Suitable Width & Depth Up To 90 Cm) 50 Mm Outside Dia. Double Wall Corrugated Pipes(Dwc) Of Hdpe For Enclosing Cable Below Ground/Road Surface, To Required Depth Complete. , Servicing And Primary Maintenance For Street Light Pole. , Light Poles Painting In Silver Colour , 26W Led Light To 100W Led Light Repairing , Old Pole Shifting, Rework And Foundation Work Per Pole Etc. , Supply &Fixing Of Shakle Hardware With Nut Bolt , Supply And Installation Of Mini Feeder Pillar With Stand , Reinforced Cement Concrete Road Cheasling Charges With Tractor Breaker (1 Hours) , Tree Triming For Overhead Line , Supplying & Erecting Street Light Control Panel Outdoor Type, For Single Phase 2 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 2 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete. , Supplying & Erecting Street Light Control Panel Outdoor Type, For Three Phase 4 Wire System Having In Built Astronomical Adjustable Programmable Timer With Minimum 5 Years Battery Backup, 4 Pole Contactor Upto 60 A, With Maintenance Mode To Switch On Street Lights During Time Of Repairs With Energy Consumption Data Recording For Analysis And Lcd Display For Energy Monitoring With Numeric Key Pad In Provided Box Complete , Servicing And Primary Maintenance Of Solar Light Pole 1 Visit In Month Included And Also Call Basis. Checking All Wire Connections, Nut Bolt Tighting, Lugs Connection, Timer Working Condition And Panel Cleaning , Supplying, Installing, Testing And Commissioning Solar Street Light Pole Comprising Of 9 W Led Fitting, 12V 18Ah Maintenance Free Lithium Battery, Min. 40 Wp Spv Module, Ms Powder Coated Battery Box Weather Proof, Mounted On 75/80 Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete. Specification No. Esd-Sol-Stl ( With 5 Years Warrantee ) , 4-3-13 Supplying, Installing, Testing And Commissioning Solar Street Light Pole Comprising Of 12W X 2 Nos. Led Fittings, 12V Min. 100Ah Maintenance Free Lithium Battery, Min. 120Wp Spv Module, Ms Powder Coated Battery Box Weather Proof, Mounted On 75/80 Mm Dia. B-Grade Gi Pole Of 6 M. Height Along With Brackets, Foundation, Earthling And Necessary Accessories Complete. Specification No. Esdsol-Stl , Providing Rental Basis Hydraulic Bucket Vehicle Of Highth 13 Mtr. And Weight Capacity 200 Kg With Driver, Oprator And Disel Etc. For Per Day Basis.. , Providing & Erecting 7 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 130 Mm A/F, Top 70 Mm A/F On Provided Foundation As Per Specification Bajaj No.Oh-Pl/Opl. , Providing & Erecting 9 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 155 Mm A/F, Top 70 Mm A/F On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Opl , Providing & Erecting 10 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 175 Mm A/F, Top 70 Mm A/F On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Opl , Providing & Erecting 11 M High (Clear Height) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 210 Mm A/F, Top 90 Mm A/F On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Opl , Supplying And Erecting Outdoor Stand Mounted Feeder Pillar For Highmast Of The Same Manufacturer With 63A Tpn Mcb Incomer, Single Dial Timer Switch, 45A Tp Contactor For Automatic Switching Of Luminaries, 2 Nos 9A Contactors And Raise/Lower Push Button, And Provision For Termination Of Adequate Size Of Incoming And Outgoing Cables Erected In Min. 14 Swg Crca Sheet Box Powder Coated With Supporting Angles, Self-Lock, Gasket And Slanting Top Erected With cement concrete Foundation Complete , Supplying And Erecting 12.5 M (Clear Height) High Mast (Top 150Mm, Bottom- 360Mm) With Lowering And Raising Motorized Unit, Lantern Carriage Assembly Suitable For Max. 6 Nos. Luminaries And Its Control Gear Box, Lightning Finial Arrangement For Fixing Aviation Light And Foundation Bolts On Provided Foundation As Per Specification Bajaj No. Oh-Pl/Hm (Excluding Luminaries ). , Making Cement Concrete Foundation Including Excavation (60 X 60) Cm X Deep 1/6 Of Pole Length In 1:3:6 Cement Concrete 20 X 25 Mm Stone Metal, 45 Cm X 45 Cm X 45 Cm /45 Cm Dia. X 45 Cm. Height Plinth Duly Plastered, With Necessary Curing And Finishing Complete. (For Above 9 M Poles) , Supplying And Erecting Mini Feeder Pillar Triple Pole With 200A Fpmccb As Incomer And 2 Outgoing Circuits With Hrc Fuse Base And Cartridge Of 100A Consists Of Aluminium Bus Bar 500 V 200 A Complete Erected In 14 Gauge Crca Sheet Box With Supporting Angles, Self-Locks, Gasket And Slanting Top To Be Erected On Provided Foundation As Per Specification No. Sw-Swr/Mfp , Supplying & Erecting Street Light Control Panel In Powder Coated Crca 14/16 Swg Sheet, Outdoor Type, Single Phase, 240 V Consisted Of Suitable Rating Contactor, 24 Hrs Digital / Astronomical Time Switch With Minimum 5 Years Battery Backup, Spn Mcb 63 A Auto/Manual Selector Switch,On/Off Push Buttons, Indicator Lamps, Control Wiring, Metering Device, Etc For Automatic Operation & Overcurrent, Short Circuit, Earth Fault Protection Of Street Lights Upto The Max Load Of 12 Kw On Provided Iron Frame / cement concrete Foundation Complete. , Providing Earthing With Galvanized Iron Earth Plate Size 60 X 60 X 0.6 Cm Complete With All Materials, Testing & Recording The Results As Per Specification No. Ea-Ep , Providing Pipe Type Earthing With 40Mm. Dia. G.L. Pipe Or 20 Mm Dia. G.L. Rod Complete With All Materials As Per Specification No. Ea-Ep , Supplying And Erecting Regular/ Standard Model Ceiling Fan Of 600Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn/Cf , Supplying And Erecting Regular/ Standard Model Ceiling Fan Of 900 /1050 Mm. Sweep Complete Erected In Position As Per Specification No. Fg-Fn/Cf , Supplying & Fixing Anchor Type Fastener Fan Hook, With 2 Nos. Of 10 Mm Dia X 75 Mm Long With Necessary Materials For Ceiling Fan. , 36 Watt Pcb , 36 Watt Driver , 50-60 Watt Pcb , 50-60 Watt Driver , 70 Watt Pcb , 70 Watt Driver , Highmast Repairing 100-150 Watt , Service Wire 4 Sq.Mm Isi Mark 2 Core , Service Wire 6 Sq.Mm Isi Mark 2 Core , Service Wire 10 Sq.Mm Isi Mark 2 Core , Frp Box Of Size 300 X200 X125 Mm 2.7Mm Thickness , 12W Led Bulb , 14W Led Bulb , 18W Led Bulb , 100 W Bulb , 200 W Bulb , 35 annual periodical maintenance Kitkat Fuse , 63 annual periodical maintenance Kitkat Fuse , Servie Reel Pvc , Retrofit T8 Led 18/20 Tube Light , Lamp Holder China Clay , Lamp Holder (Pendent) , 5Am Shocket Armor , 5Am Sawich Armor , Miter Box Singal Phase Pvc 300X150x420 , Miter Box 3Phase Pvc 540X600x200 , Miter Box Coted , 8M Sarfes Box & Pleat , Rsj Pole 9 Mtr , V Cross Arm 22 Kv , Cut Pont Set 22 Kv , Pin Insulater22 Kv , Disc Insulater 22 Kv , Nut Bolt , Conductor 55 Sq Mm Aac , Ht Stay Set , Lt Stay Set , Stay Wire , Gi Wire 8 Swg , Pole Errection , Conductor Errection , V Cros Fixing , Cutpoint Fixing , Mcb Box Metal 3Way , Supply Of Tiranga Pole As Per Sepcifucation 139.7Mm Od Pipe - 3Mtr 114.3Mm Od Pipe 1Mtr - 03 Nos 88.9Mm- Od Pipe - 2 Mtr Total 8 Mtr Pole , Day &Night Motin Sensor Auto On/Off Light Electronics(With Drayvar) , 9 Mtr. Pole Solar High Mast System: A) Solar Led Luminaries / Flood Light Wattage Should Be Of 50 Watt -- 6 Nos. B) Led Should Be Of/Powered By Philips/ Osaram Or Equivalent Reputed Brand. C) Battery Should Be Of Lithium Ion / Li Sepo4 (Lithium Ferro Phosphate) D) Battery Capacity Should Be Atleast 100 Ah --- 6 Nos. E) Solar Panel Should Be Of 330 Watt --- 6 Nos. F) Pole Should Be Polygonal. The Mast Should Be Hot Dip Galvanized 20 , 6 Mtr. Pole Solar High Mast System: A) Solar Led Luminaries / Flood Light Wattage Should Be Of 50 Watt -- 4 Nos. B) Led Should Be Of/Powered By Philips/ Osaram Or Equivalent Reputed Brand. C) Battery Should Be Of Lithium Ion / Li Sepo4 (Lithium Ferro Phosphate) D) Battery Capacity Should Be Atleast 100 Ah --- 4 Nos. E) Solar Panel Should Be Of 330 Watt --- 4 Nos. F) Pole Should Be Polygonal. The Mast Should Be Hot Dip Galvanized 20 , Gst Charges
Contract Date: Jun 08, 2026 Contract Value : 14.78 Lakh
Government Departments No of Bidders 3
Maharashtra View Result →
Contract Date: Ref. Documents Contract Value : 49.64 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 5
Jammu And Kashmir View Result →
34.
Housing Urban and Rular Development #11229363 AOC
Misc. Repairs And Other Civil Works Of Tiles, Doors, Windows,Wooden Flooring, Shed And Internal And External Painting In C.M. Bunglow Civil Line Nagpur.(Only For Society).-= 1 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial Sand 2 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 3 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. 4 Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 1190 to 1202 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete. a) Flooring 5 Providing and laying Vitrified MATT finishhaving decorative type of size 1000 millimeter x 1000 millimeter of 8 to 10 millimeter thickness (on a existing flooring) with bonding chemical andconfirmingtoIS15622-2006(GroupBla)ofapprovedmakeshadeandpatternfor flooringinrequiredpositionlaidonabedofbondingchemicalfillingjointscuringand cleaning etc .complete. 6 Providing and laying ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 7 Providing and laying ceramic tiles ofhaving size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 8 Providing and fixingTable top white wash basin of size 120x635x405mm rubber plugs and brass chain, withpillar cock, C.P.Angular stop cock long thread, continentalincluding S.S. bottle trap of approved make havingnecessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. 9 ProvidingandapplyingTextureplasterwithfinishingwithtexturematerial ofapproved makein 3 to 4 millimeterthickness on previously plastered surface, including Plaster Groove 6mmthicknessorTapeGrooves35to45mmthicknessorasrequired,inallposition including preparing the surface, scaffolding etc. complete. 10 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating with box 11 Providing and laying cement concrete flooring 40 mm thick with M15 cement concrete laid to proper level and slope in alternate bays including compaction, filling joints, marking lines to give the appearance of tiles of 30 cm x 30 cm or other size laid diagonally/ square etc finishing smooth (with extra cement) in any colour as directed and curing etc. complete. With Crushed Sand. 12 Providing and fixing M40 grade thick vibrated pull cast or similar type concrete frame with chamfer conforming to I.S. 65241983 having 6 mm dia bars 3 Nos. And strips @250 mm c/c and fixing in wall with 6 Nos. of hold fast of 12 mm dia bars 500 mm long including primer and oil painting etc, complete) frame size 60 mm x 125 mm 13 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 14 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etccomplete 15 Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges, cleaning complete.b) Granite 16 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 17 Removing G.I. or A.C. sheet roofing including purlins, principal rafters etc. including sorting serviceable and unserviceable materials, stacking the same as and where directed in the compound including scaffolding etc. complete. 18 Providing, fabricating and erecting at site of work the tubular steel structure (shed) as per standard design and specifications having various spans in between trusses and in multiples of standard length of bays as specified as per standard specifications, inclusive of cost of steel tubular trusses, tubular columns purlins, tie runners, foundation bolts, base plates, nuts and bolts, welding wherever required etc.as per detailed drawing inclusive of one coat of anticorrosive paint and two coats of oil painting of approved quality and shade etc. complete.Spec. No. : As directed by Engineer-in-charge. 19 Providing and fixing acrylic plastic sheet panels of approved quality in required thickness plain clear or any colour or obscured linings in lieu of glass pans to doors/windows including providing and fixing clips, putty etc. complete. (a) 2.00 mm thick. 20 Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32mm size of approved make including soil pipe, vent pipe up to outside face of wall ,100mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete. 21 Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete. 22 Removing W.C. Pan including disconnecting the sanitary and water supply connections, removing and breaking flooring and bed con-crete around pan removing the same carefully and stacking the service-able materials as and where directed includingthrowing the unserviceable materials out side etc. complete. 23 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete. 24 Providing and fixing 10 cm PVC nahani trap with grating etc. complete. 25 Providing and fixing 1st class white glazed earthenware Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:1 0) cement concrete bedding 15 mm thick, 10 liter P.V.C. flushing cistern with all necessary pipe connection etc. complete. 26 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 27 Providing and fixing on walls/ceiling/floor 20 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 28 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 29 Providing and fixing on walls/ ceiling/ floor 32 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 30 Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete. 31 Providing and fixing C.P. BIB cock with wall flange jaquar or equivalent make continental (CAT.NO. CON-047) including necessary sockets/ union nut etc. complete. 32 Providing and fixing C.P. Angular stop clock with wall flange Jaquar make or equivalentcontinental (CAT.NO. CON-059) including necessary sockets/union nut etc. complete. 33 Providing and fixing C.P. pillar cock long neck with aerator jaquar or equivalent make continental (CAT.NO. CON -021) including necessary sockets/union nut etc. complete. 34 Providing and fixing screw down 15 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete 35 Providing and fixing screw down for 25 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete. 36 Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete. 37 Providing and fixing 15 mm. dia Ball cock medium type with PVC float including sockets & necessary fittings and tested as per municipal requirement etc. complete. 38 Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres 39 Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 40 Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover. 41 Providing & constructing Brick Masonry Inspection Chamber 60cm x 45cm With R.C.C. raft in B.C. soil area including cost of reinforcement, 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight 75 mm thick R.C.C. cover etc. complete. 42 Providing and fixing C.P. wall mixer with provision for overhead shower with 115mm long bend pipe and wall flange jaquar or equivalent ?make continental (CAT.NO. CON-273 UPR) including necessary sockets/union nut etc. complete. 43 Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete 44 Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. 45 Providing and fixing crimped with G.I. mesh and size 20 mm x 20mm 10 guage to iron angle frame including welding crimp mesh to angle frame and steel flat, fixing the frame in its original position and oil painting etc.complete ( excluding cost of structural steel) 46 Transportation of material obtained from debris of various sorts including necessary excavation/ loosing including loading, unloading and conveying and disposing as directed. 5 km leadloading unloading 47 Providing , laying and fixing ,jointingEco- drain 160 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings such a bends, tees , coupler, etc, jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated materialetc. complete. 48 Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Medium duty (140 kg) 49 Providing and fixing reinforced cement concrete cover of size 60 cm x 45 cm with frame over inspection chamber etc. complete.Medium duty (100 kg) 50 Providing and fixing heavy duty inter locking concrete RUBBER MOULD GLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) 51 Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards,screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws.The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate should include necessary additional ceiling sections and intermediate channels.Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete. 52 Providing and fixing Shutter to wall Cupboard consisting of Teak Wood styles and Rails 25 mm thick and 75 mm wide with panel insert of 12 mm thick particle Board with one approved coloured Laminated Face on one side 1.5 mm thick, bonded with Phenol Formaldehyde Synthetic Resin including Lipping Beading. Iron oxidised fixtures and fastening and oil primer coat etc. complete. (Excluding cupboard frame). 53 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 90 cm wide with teak wood planking 20 mm thick including two coats of coal-tarring the upper surface of plank etc. complete.(excluding painting to underside of plank). 54 Providing and fixing C.P. 2 Way BIB cock with wall flange of approvedmake including necessary sockets/ union nut etc. complete as directed by Engineer in charge. 55 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 kg/sqm) 56 Providing and fixing Country cut teak wood double or single leaf panelled shutters, 35 mm thick style top and freze rail 95 x 35 thick with lock and bottam rail 195 x 25 mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3 coats complete 57 Cleaning elevated water storage Reservoir within a given period, by using bleaching powder at the rate of 14 gm/sq.m .washing thrice potassium permanganate at the rate of 2.50 gm/sq.m. finally, cleaning washing by using nylon brush, coir string and duster, bailing out water etc. complete. i)Tank capacity up to 2,000 litre. 58 Trimming of grass, shurbs and weeds from the shoulders/berms and disposing off the same to suitable locations etc. complete 59 Replacement of damaged Mortise Lock of approved quality and make to door shutter including Removing and Refixing with Necessaryscrew, making proper adjustment for smoothoperation etc. complete as per sample approved by Engineer in-chareg. 60 ProvidingHydrulic door closer .... 61 ProvidingSuper Jet Spry with flange 2 in 1 faucet 1.50 mtr long. 62 Providing Skilled plumber with tools as per direction of Engineer Incharge. 63 Providing skilled carpentor with tools as per direction of Engineer Incharge 64 Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surfaces in two coats including scaffolding, preparing the surface and including scraping etc. complete. 65 Providing and applying two coats of synthetic enamel paint of approved colour to new /old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. 66 Providing and applying single coats ofexterior acraylic emulsion paint confirming to corresponding I.S. of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface, applying primer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 67 Providing and fixing sheet glass of 24 oz. for all size including putty etc. complete 68 Providing and fixing high level 10 liter capacity with fittings inlet PVC pipe with stop tap ,brackets for fixing the cistern,32 mm dia. PVC flush pipe with fitting and clamps 20 mm dia. PVC overflow pipe with mosquito proof couplings, galvanised iron chain and pulley painting if ordered to cistern pipe etc. and cutting and making good the damaged wall and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use) 69 Manualy clearing the chockes from under ground drainage line including Inspection chambers with the help of required tools for propre functioning line chamber to chamber etc. complete. 70 Providing and fixing Glass self 125 mm wide and 600 mm long with necessary chromium plated brackets providingT.W.gutties etc. complete 71 Providing curtain rod dropping with channel MAC brand of superiar quaility including all required material labour etc complete. as directed by engineer incharge......... 72 Replacement of damaged alluminium Butt Hinges of 125 mm of approved quality and maketo door shutter including removing existing the same inoriginal position making prope radjustment for smooth operation etc. complete as per sample approved by Engineer incharge. 73 Replacement of damaged Aldrop 300 mm Chromium plated of approved quality and maketo door shutter including removing existing the same in original position making proper adjustment for smooth operation etc. complete as per sample approved by Engineer in-charge. 74 Replacement of damaged Tower Bolt 300 mm Chromium plated of approved quality and maketo door/window shutter including removing existing the same inoriginal position making proper adjustment for smooth operationetc.complete as per sample approved by Engineer in-charge. 75 ProvidingHandle 150 mm Chromium plated (Rounded shape). 76 Providing cement based water proofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M.1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M.1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1Kilogramper bag including finishing the surface smooth with cement slurry admixedwithapprovedwaterproofingcompound.Markingfinishedsurfacewithfalse squares of 300mm x 300 mm. making the junctions at the parapet rounded and tapered top for requiredheight,withdripmouldatthejunctionofplasterandparapetandcuringand covering10yearsGuaranteeagainstleakproofnessonCourtfeestamppaperofRs.500/- including ponding test etc. complete. 77 Providing and injecting epoxy grout including structuring of crack in the body of slab girder by sand blasting, fixing inlet tube arrangement including cost of materials, machinery required for the work and labour charges etc. complete. 78 Providing & fixing Decorative wall paper superior quality including adhesive to fix at wall etc complete. as directed by engineer incharge......... 79 Providing and fixing European type white glazed earthenware water closet pan with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 mm dia. UPVC flush pipe with fittings and clamps ,20 mm dia.UPVC overflow pipe ,mosquito proof couplings G.I. chain and pulley,with water Jet and fitting including cutting and making good to the walls and floors testing etc. complete.(prior approval of sample and brand by Ex. Engineer is necessary before use) 80 Providing & fixing Mica laminate as per ISI 0.1 mm thick etc complete...... 81 Providing & fixing 19 mm plywood 710 bwp full red core with report etc complete...... 82 Providing & fixing 12 mm plywood 710 bwp full red core with report etc complete...... 83 Providing & fixing teak wood batterns 50x25 mm etc complete...... 84 Providing & fixing plain glass 6 mmetc complete...... 85 Providing & fixing teak wood batterns 70x45 mm etc complete...... 86 Providing & fixing door stopper etc complete...... 87 Manualy clearing by removeing the chockes from Nahni Trap, Gully Trap, Wash basin unit, Sink and WC with the help of required tools for proper functioning the same etc. complete. 88 Providing andapplying Twocoats ofwall care Putty onplastered surface andCeiling and Walls to prepare surface even and smooth of approved make, etc complete. 89 Providing and Laying wearing laminate wooden or eqiuvalent flooring 8 mm thick in attractive strips for conference hall. 90 Providing, laying andfixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 kg/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm ,skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. 91 Providing and fixing stainless steel sink of size 600 x 510 x 200 mm incluidng coupling, outlet pipe, elbow and other necessary fitting, finishing etc. complete. 92 Providing and Fixing Vertical Blinds of approved Make and shade of 100mm regular fabric with powder coated aluminium channel with telting PVC chain & bottom weight plate with allnecessaryfixturesandfittingetc.complete.(SampletobefinalbyEngineerIn-charge prior execution of work) 93 Providing and applying French polish for required finish on previously polished wood including knotting, preparing the surfaces, scaffolding etc. complete as directed 94 Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete. Note:The work to be executed on prior approval of Superintending Engineer will be necessary. 95 Providing, laying and fixing P.V.C. pipe of 40mm dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 96 Providing and fixing C.P. sink cock with raised J shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete. 97 Providing and fixing 100 mm dia. chromium plated brass showers rose to 15mm dia. supply pipe including necessary bend and socket complete. 98 Providingandlayingtelephoneblack/AmbaWhite/Cadburybrown/Rubyred/Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing,etc. complete. 99 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Rubyred / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 100 BASIC TEST OF CEMENT :-Standerd Consistancy Fineness, Specific Graviti, Setting Time (Initial & final, Compressive Strength, Soundness. 101 BASIC TEST OF BRICK :-Water Absorption, (Set of 5 Brick), Comoressive Strength (Set of 5 Blocks), Efflorescence (Set of 5 Bricks) 102 CERAMIC TILES/ VITRIFIED TILES :- Water Absorption, Modules of Rapture (Set of 6 Tiles) 103 BASIC TEST OF C. C. TILES. :-Flexural test(Set of 6 tiles) Water Absorption,(Set of 6 tiles) Resistance to wear(Set of 6 tiles). 104 BASIC TEST OF Fine Aggregate Fineness Modulus (Sieve Analysis) silt and cley content..... 105 BASIC TEST OF Concrete Paving Block :- Compressive strength, Water Absorption, (Set of 8 Blocks ) 106 BASIC TEST OF STONE / RUBBLE/ Crushing Value/Compressive strengh, Water 107 Providing royalty charges against royalty paid by the contractor to the Revenue department for supply of different construction materials for whichroyalty is necessary.(Royalty charges will be paid to contractor after sumbitting valid documents of revenue authority)Royalty for naturalSand (Royalty + Surcharges 2% & Distt. mineral foundation cess 10%)
Contract Date: Jun 04, 2026 Contract Value : 15.18 Lakh
Government Departments No of Bidders 2
Maharashtra View Result →
37.
Defence #11219952 AOC
Tender For (Schedule-A Part-I B/R Works) Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Not Exc 1.50 Sqm Each And Removing From Site Complete All As Specified And Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Exc 1.50 Sqm Eachand N Exc 4 Sqm And Removing From Site Complete All As Specified And Directed. , Taking Down Shutter Of Any Description Area Exc. 1 Sqm And N.Exc. 2 Sqm And Removing From Site Complete All As Specified And Directed. , Demolition Of Brick Work Built In Cement Mortar Including All Quions, Arches, Pillars Etc But Excluding Ashlar Facings Dressed Stone Work And Precast Concrete Articles Complete All As Specified And Directed. , Demolition Of Cement Concrete (Unreinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Complete All As Specified And Directed. , Demolition Of Cement Concrete (Reinforced) Of Any Description And Any Position Not Other Wise Specifically Provided Reinforcement Cut As Required To Facilitate Demoltion Complete All As Specified And Directed. , Taking Down Cement Plaster On Brick Or Stone Wall Etc Including Racking Out Joints, Hacking For Key Scrubbing Down With Water Etc To Receive New Plaster Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 125 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc. Complete All As Specified And Directed. , S&F Pressed Steel Frames Of Size 105 Mm X 60 Mm For Doors With One Or More Rebates Including Necessary Fixing Lugs, Hinges, Lock Strike Plate, Etc Complete All As Specified And Directed. , S & F For 35 Mm Thick Factory Made, 2Nd Class Hard Wood Glazed And Skeleton Shutters Open Rebeated And Prepared To Received Glass, Gauzed, With Out Sash Bar Edges Of Framing Plain, Chamfered Or Rounded, Fitted With Cut And Mitered Beads For Securing Glass Etc, Size Of Member Of Shutter As Per Specified In Ssr Part-I Section 8, Clause 8.24 (A) And For Door And Fixed With Chowkats, Chemically Pressure Treated Complete All As Specified And As Directed. , S&F For 35Mm Thick 2Nd Class Hard Wood Plain, Framed Pannelled Shutters (Two Panel) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board Wiyh Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per (Is : 1003 Part-I , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And As Directed. , S&F Box Type Steel Window Side Hung Double Shutters With Provision For Desert Cooler/Ac(Inside For Wire Mesh & Out Side For Glass), Including Guard Bar,Hinges, Steel Handle, Tower Bolt And Steel Peg Stay Complete With Glazing Bar Dovetailed Or Welded And Fixed, Steel Window Shall Be Conforming To Relevant Is Complete All As Shown On Drawing No Ceuz/Td/1302/09, Sh 1/3 To 3/3 And Directed. Complete All As Specified And Directed. Note:- Wire Mesh And Sheet Glass Shall Be Measured And Paid Separately , S&F Steel Ventilators Top Hung Double Shutters (Inside For Wire Mesh & Out Side For Glass), Including Hinges, Steel Handle, Tower Bolt And Steel Peg Stay Complete With Glazing Bar Dovetailed Or Welded Including A Coat Of Red Oxide After Preparation Of Surface Before Fixing.Steel Window Shall Be Conforming To Relevant Is All As Specified. Note:- Wire Mesh And Sheet Glass Shall Be Measured And Paid Separately , S&F For Sheet Glass Palin/Coloured (As Per Directed By Engr-In-Charge) 3Mm / 5 Mm Thick Best Quality And Glazing With Rubber Packing, Screws Or Glass Putty In Squares Exc 0.5 Sqm Each Pane Complete All As Specified And Directed. , S & F For Stainless Steel Wire Cloth Of 0.36Mm Dia Wire And Average Width Of Aperture 1.40Mm & Fixed With Tacks Or Screws, Wire Staples, Etc Complete All As Specified And Directed. , S&F Factory Made Solid Pvc Door Frame Of Size 50 Mm X 47 Mm Made Out Of 5 Mm Wooden Grain Printed Pvc Sheet & Edges Will Be Painted To Match With Printed Sheet Reinforced With M.S. Square Tube, Suppling & Fixing In Opening As Per Specification & Drawingreinforced Complete All As Specified And Directed. , S&F Factory Made Solid Panel Pvc Door Shutter 30 Mm Thick (Style) Consisting Of Frame Made Out Of Ms Tubes For Top & Bottom Rails. Ms Frame Shall Be Covered With Heat Moulded Wood Grain Printed Pvc Sheet 5Mm Thick X15Mm Wide Pvc Sheet Beading Used Inside Stiles And Rails And Decorative Pvc Beading Of 10Mm X 10Mm (900 ) Used Instead Of Exposed Portion Of Pvc Sheet Beading Pvc ‘C Channel Having A Pvc Sheet Strip Of 20 Mm Width Stuck Inside With Solvent Cement For Stiles And Plain Colour Pvc Sheets For Top Rail, Lock Rail & Bottom Rail On Either Side & As Gap Insert For Top Rail & Bottom Rail. Panelling Of Plain Colour Pvc Sheet To Be Fitted In The Ms Frame Welded/Sealed To The Stiles & Rails With Suitable Pvc Sheet Beading, And Joined Together With Solvent Cement, Complete All As Specified And Directed. , S&F 100 Mm Long Mild Steel Butt Hinges, Cold Rolled, Medium Weight Complete All As Specified And Directed. , S&F For 125Mm Long Anodised Aluminium Barrel Tower Bolt Of Extruded Section Complete All As Specified And Directed. , S&F 150Mm Long Anodised Aluminium Handles, Cast Type Complete All As Specified And Directed. , S & F In 300Mm Long Aluminium Alloy, Anodized Sliding Door Bolt With Hasp Stapple ( Bolt Type) And Fixing Clips Of Sheet Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast Aluminium Alloy And Fixed Complete All As Specified And Directed. , S&F For 20 To 25 Mm Dia Stainless Steel Drapery Curtain Rod With Brass /Nickel Chrom Polish / Designer Lattos And Brackets Complete All As Specified And Approved By Engr-In-Charge Including Taking Out Old Pelmet With Curtain Rods Complete All As Specified And Directed. , S&F 300 Mm Long Mild Steel Ordinary Rat Tail Rod Pattern Spring Including Roller And Roller Plate Complete All As Specified And Directed. , S& F Floor Door Stopper Of Aluminium Alloy Body And Tongue ,Anodised ,With Hard Drawn Steel Spring ,Fixed In Floor Overall Length Of Cover Plate 140Mm Complete All As Specified And Directed. , S & F 2 Nd Class Hardwood For Plain, Solid, Straight Chowkats And Frames, Wrought, Framed Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints, Complete All As Specified And As Directed. , S & F For Pvc And Cupboard Shelf/ Partition/ Frame / Shutter Of 18Mm Thick Side Of Panel Externally Impact Perfact Finish To The Shutter And Joined Together With Solvent Cement Adhesive 8Mm Thick (4Mmx2)X12Mm Wide Pvc Sheet Is Used As Gap Insert For Top & Bottom Rail, 18Mm X 1Mm Pvc Edge Lipping Is Done On Top & Bottom Side Using Pvc Solvent Cement Adhesive, Incl Hasp And Stable For Locking Purpose, Etc Complete As Per Direction Of Engr-In-Charge, Manufactures Specification And Drawing. , M&L For Block Boards 18/19 Mm Thick, Grade 2 Quality, I N T E R I O R Grade, Decorative Type With Decorative Face Veneer On One Face, Fixed With Screws To Timber Frame-Work For Partision Of Cupboard Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Straight Or Curved On Plan Exc. 6M Mean Radius Built In Cement Mortor 1:6., Etc Complete All As Specified And Directed. , M&L For Rendering 10Mm Thick In Cm 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , M&L For Rendering 15Mm Thick In Cm 1:4 On Other Than Fair Faces Of Brick Or Concrete Surface With Liquid Water Proofing Compound @ 200 Ml Per Bag Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed.(Note:- Liquid Water Proofing Compound To Be Measured Paid Separately) , M&L For Rendering 5Mm Thick In Ceiling Cm 1:3 On Fair Faces Of Brick Work Or Concrete Surfaces Finished Even And Smooth Without Using Extra Cement Complete All As Specified And Directed. , Supply Only Liquid Water Proofing Compound Complete All As Spesified And Directed. , M&L Plain Cement Concrete 1:4:8, Type D2( Using 40Mm Graded Stone Aggregate) 75Mm Thick As In Sub Base Of Floor/ Interlocking Paver Block Complete All As Specified And Directed . , M & L 25Mm Thick Cement Concrete Type B-0, 1:2:4 (Using 12.5 Mm Graded Aggregate) For Levelling Course In Floors Complete All As Specified And Directed. , M & L For Non Skid Joint Free Coloured Ceramic Floor Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exc 0.11 Sqm But N Exc 0.18 Sqm,In Floor Etc Set & Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Surface With 15Mm Thick Screed Bed Or Bedding Layer In Cm (1:6) Complete All As Specified And Directed. , All As Per Item No 35 Above But As In Skirting/ Dado Etc With And Including 10Mm Thik Backing Coat In Cement Mortar 1:4 An Wall Complete All As Specified And Directed. , M&L For Glazed Ceramic Coloured Wall Tiles (Textured And Design As Required) In Vertical Surface 450X300X7Mm Thick, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over And Including 10 Mm Thick Rendering In 1:4 Cm Complete All As Specified And Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On New Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Applying Two Coat Of Synthetic Enamel Paint On Old Wooden Surfaces Of Any Description Over 10 Cm Width Or Girth Complete All As Specified And As Directed. , M & L For Preparing New Plastered Surfaces Of Wall And Applying Two Coats Of Distemper Oil Emulsion Over A Coat Of Alkali Resistant Cement Primer And Over A Coat Of Putty Complete All As Specified And Directed. , Material And Labour For Apply Two Coats Of 100% Premium Anti Fungal Weather Coat Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistence As Per Is 15489;2004, Alkali & Fungal Resistence, Dirt Resistence Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.9 Litre / 10 Sqm Over New Surfaces Complete All As Specified And Directed. . Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Clain On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M & L For Preparing New Plastered Surface On Ceiling And Applying Three Coat Of White Wash Complete All As Specified And Directed. , M&L For Complete Removal Of Exsting Treatment On Plastered Or Unplastered Surface Including Removal By Brooming Down With Steel Wire Brushing, Scraping Down Smoke Soot, Moulded, Moss, Efflorscent Salt, Trading Oil And Greasy Spots And Applying Two Coat Of Oil Bound Distemper On Walls Over A Coat Of Putty Complete All As Specified And Directed. , Material And Labour For Complete Removal Of Existing Treatment And Apply Two Coats Of 100% Premium Anti Fungal Weather Coat Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistence As Per Is 15489;2004, Alkali & Fungal Resistence, Dirt Resistence Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.9 Litre / 10 Sqm On Old Surfaces Complete All As Specified And Directed. Note:- (A) Each Stage I.E. Preparation Of Surfaces, Application Of Primer, Application Of First Coat, Application Of Second Coat Will Be Got Passed From Engr-In -Charge.The Acrylic Emulsion Paint Work Shall Be Carried Out By Using Smart Painting Tools And Techniques As Specified In Particular Specifications And Contractor Will Have To Produce Necessary Documents For Purchase Of Smart Painting Tools Or Rent Receipt Of These Tools Along With Bill/Rar.The Bidders Are Requested Take This Aspect In Consideration Before Quoting Their Rate And No Clain On Account Of Misunderstanding Or Otherwise Shall Be Admissible On This Account. , M&L For Three Coat Of White Wash On Old Surface On Wall Including Preparation Of Old Surface Complete All As Specified And Directed. , M&L For Three Coat Of White Wash On Old Surface On Ceiling Including Preparation Of Surface Complete All As Specified And Directed. , Dismantling Of Kota Stone Slabs And Tiles Of Any Description Or Thickness In Laid Bedded And Pointed Floors, Aprons Etc Incl Screed Bed Complete All As Specified And Directed.. , M&L For Machine Cut Kota Stone Slab Flooring 18-20 Mm Thick Over Cement Screed Base Laid And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completeand Including 20 Mm Thick Screed Bed Or Bedding Layer In Cm 1:6 Complete All As Specified And As Directed. , M&L For Kota Stone Slab 18-20 Mm Thickin Riser Of Steps, Skirting, Dado And Pillar Laid Over Cement Screed And Jointedwith Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Completeand Including 10 Mm Thick Rendering In Cm 1:4 Complete All As Specified And As Directed. , M&L For Rubbing And Washing Of Kota Stone Floor And Mirror Polishing On Kota Stone/ Stone Work Where Ever Required To Give High Gloss Finish Complete All As Specified And Directed. , M & L 20Mm Thick Granite (Of Any Type) Work (Table Rubbed And Polished) In Steps, Jambs, Pillars, Window-Cills, Cooking Platforms And Like In Cement Mortar (1:4) Including Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Shade Of Granite With Providing 15Mm Thick Screed Bed In Cement Mortar 1:4 Complete All As Specified And As Directed.. , M&L Plain Cement Concrete 1:3:6, Type B1( Using 20Mm Graded Stone Aggregate) 75Mm Thick As In Plinth Protection Complete All As Specified And Directed . , Demolition Of Cement Or Lime Concrete In Any Despription Along With Tarfelt Treatment In Sunken Portion / Roof And Cement Mortar Bedding From Roof Removal Rubbish Out Side Md Land Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:2:4 Type B-0 Using 12.5Mm Graded Crushed Stone Aggregate As In Sunken Portion, Subbase, Etc Complete All As Specified And As Directed. , M&L For Water Proofing Treatment To Sunken Portition / Roof Etc. In Following Sequence:- (I) Properly Cleaning And Drying The Surface (Ii) Applying A Coat Of Bitumen Primer @ 1.2Kg/Sqm And Primer Shall Be Allowed To Dry Over Night. (Iii) Laying App Based Modified Water Proofing Membrane Of Weight Not Less Than 3Kg Per Sqm And Thickness Not Less Than 3 Mm, With 100Mm Overlaps, Sealed And Bonded To The Surface By Torchon Method (Iv) Applying Two Coat Of Bituminous Based Aluminum Painting @ 0.15 Kg/Sqm Each Coat On Water Proofing Treatment With Preparation Of Surfaces Complete All As Specified And Directed At Site. , S&F Vitreous China Squatting Pan Orissa Pattern Of Size 580X440Mm White With Integral Foot Rest (Excluding Flushing Cistern And Flush Pipes) Including Connection To Trap And To Flush Pipe Etc And Lime Concrete Bedding Including P Or S Trap Complete All As Specified And Directed. , M & L For Complete Removal Of Existing Sunken Treatment And Clean The Surface Of Sunken Slab , Appling Plain Cement Concrete B1 1:2:4 (20 Mm Aggregate Of ) With Wpc Of Thickness 100 Mm Finished Even And Fair With 1:20 Sloped Towards Corner Of Outer Wall & Pvc Pipe Of Require Dia Be Inserted At Corner Projecting Outside 20 Cm From Wall And 15 Mm Plaster Cm 1:3 With Wpc Is Also Applied Over Plain Cement Concrete And Returning Filling The Sunken Slab Complete All As Specified And Directed , M&L In Repairs Pvc Valve Less,Syphonic Action Type Flushing Cistern,Low Level ,White With Inlet Ball Valve,Float And Handle Including Brackets And Connection To Pipe And Fixing Of Chain And Pull Or Lever If Any Complete All As Specified And Directed. , Supply And Fixing Of Soap-Dish Chromium Plated Complete All As Specified And As Directed. , S&F In Repairs Of Brass Cp Tubular Towel Rail 20 Mm Dia 60Cm Long Between Flange With Brackets Etc As In Repair Complete All As Specified And Directed. , S&F Vitreous China Wash And Basin, White, Flat Back, Size 550 Mm X 400 Mm Incl Fixed On New Ms Bracket, Fixing Of Tap, Waste Coupling,Fitting,Waste Pipe And Union Incl 15 Mm Bore Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed Complete All As Specified And Directed. , S & F Pvc (Swr) Nani Trap / Floor Trap Plain Or Multi With Stainless Steel Grating Incl Joining To Waste Pipe With Solvent Cement Joint Dia Of Outlet 75Mm Bore Complete All As Specified And As Directed. , S&F In Repair 110Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S&F In Repair 75Mm Bore Pvc (Swr) Bends Any Radius Complete All As Specified And As Directed. , S & F In Repair 110 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repair 75 Mm Bore Pvc (Swr), Junction Single, (Single T) Equal Or Unequal Complete All As Specified And Directed. , S & F In Repairs 110Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Tren1Ches Complete All As Specified And As Directed. , S & F In Repairs 75Mm Bore Pvc (Swr) Pipes Singles Socket In Any Length With Rubber Ring Joints Fixed To Walls / Floor Or In Trenches Complete All As Specified And As Directed. , M & L For Cutting Chases, Pinning In, Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Not Exc 10Cm Girth Complete All As Specified And Directed. , Taking Up Or Down 15 Mm Dia Old Serviceable / Unserviceable Steel Tubing Any Grade And Connections Cleaning For Re-Fixing Or Removal To Store Complete All As Specified And Directed . , All As Per Item No 70 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F Steel Tubing Medium Grade ,Galvanized With All Fitting Such As Bend ,Elbow, Socket,Tees,And Fixed Complete To Wall Or In Ceiling Or In Floors Including Cutting Threading And Making Forged Bends On Pipes Ms Hooks Etc ,For 15Mm Bore Pipes Complete All As Specified And As Directed. , All As Per Item No 72 Above But 20Mm Bore Complete All As Specified And As Directed. , S&F In Repair For 15Mm Bore Bib Taps Chromium Plated With Crutch Or Butterfly Handle ,Screwed Down , Screwed For Iron Pipes Or Brass Ferrule Complete All As Specified And Directed. , S&F In Repair Cp Angle Stop Cock Of 15Mm Bore Screwed Down For High Pressure With Crutch Or Butter Fly Handle ,Screwed Both End For Iron Pipes Complete All As Specified And Directed.. , S&F In Repair Cp Wall Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe 15Mm Bore Complete All As Specified And As Directed. , S&Fixed In Repair 125 Mm Size Chromium Plated Shower Rose With Siwel Joint Suitable For 15 Mm Bore Gi Pipes Complete All As Specified And As Directed. , S&F In Repairs Pvc Connection 15Mm Size With Ptmt Nuts Of Length 450 Mm Long Complete All As Specified And As Directed. , S& F In Repair Rotational Moulded Polyethylene Water Storage Tank 500 Liters Capacity (Cylidrical Vertical With Closed Top) Hoisted And Fixed In Position All As Specified In Ssr Part I Incl Brass Float Valve 20Mm Dia And Dismantling Water Tank. , S & F In Shelf Of Ptmt Fixed With And Including Chromium Plated Brass Screws And Wooden/Plastic Cleats (Minimum Weight 300 Grams) Complete All As Specified And As Directed. , S&F In Trepair Kitchen Sink With Drainage Board Made Of Stainless Steel 1.0 Mm Thick In Kitchen With Plug , Washer And Waste Including Bedding Layer In Cm (1:6) In Wall Or Including Fixing Cantilever Bracket And Connecting Union To Pipes Over All Size 915X460 Mm Bowl Size 410X330X160 Mm Including Taking Out Unserviceable Kitchen Sink Complete All As Specified And As Directed. , M&L For Stain Less Steel Plate Rack For Kitchen 1 Mm Thick Of Best Quality With Suitable Hanging Arrangement And Fixed To Wall Complete All As Specified And Directed .Note:- Size Of Plate Rack Should Not Be Less Than 900X1200 Mm And Weight Of Rack Shall Not Be Less Than 8.5 Kg Each Complete All As Specified And As Directed. , S&F In Repair Gun-Metal, Globe Or Gate Valves, 20 Mm Dia Bore Pipes With Iron Wheel Head, Screwed Both Ends For Iron Pipe And Fixed Complete All As Specified And As Directed. , M & L High Strength Steel Deformed Tmt Bars 10 Mm Dia And Over, Cut To Length, Bent To Shape Required Including Cranking, Bending Spirally For Hooping Columns,Hookings Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.90 Mm Dia Or Securing With Clips, Etc Complete All As Specified And Directed. , M & L For Formwork Fair And Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete B1 1:2:4 Using 20 Mm Graded Stone Aggr As Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Etc Complete All As Specified And Directed , M & L For Formwork Flat Fair Finished Surfaces To Sides And Soffits Of Floor Or Roof Beam, Beam Hauchings, Bands, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc Complete All As Specified And Directed , M&L Reinforced Cement Concrete M-25 Using 20 Mm Graded Stone Aggr As In Beams, Bands, Cantilvers, Bressummers, Linters, Chajjas, Etc Over 1.5M Span Etc Complete All As Specified And Directed , M&L For Mild Steel Bars (Tmt Bars) 5Mm Dia And Over Upto And Including 10Mm Dia In Strriups,Spacers And Binders Complete All As Specified And Directed. , M & L For Precast Cement Concrete 1:2:4 Type B-1 (Using 20Mm Graded Crushed Stone Aggregate) As In Manhole/Drain Slab Cover All As Specified And Set In Cm 1:4 Complete All As Specified And Directed. , Excavation In Trenches N.Exc 1.5M Wide And N.Exc 1.5M In Depth For Foundation Or Etc, For Shafts, Wells, Cesspits, Manholes, Pier Holes, Etc N.Exc 10 Sqm On Plan And N.Exc 1.5M In Depth And Getting Out In Hard Dence Soil, Complete All As Specified And Directed. , Returing, Filling In Trenches, Incl Spreading, Levelling, Watering And Well Ramming In Layers Not Exc 25 Cm In Hard/Dense Soil Complete All As Specified And Directed. , Removing Excavated Material (Soil) To A Distance Not. Exc. 50 Mtr And Depositing Where Directed At A Level Nexc 1.5 Mtr Above The Starting Point Complete All As Specified And Directed. , Demolition And Breaking Up 150Mm Dia Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete ) And Set In Cement Mortar Complete All As Specified And Directed. , M&L For Concrete Bed To Drain Pipes Including Packing Under, And Haunching Against The Sides Of 150 Mm Bore Pipes In Cement Concrete 1:3:6 Type C-2 ( Using 40 Mm Graded Stone Aggregate) After They Are Laid And Tested Complete All As Specified And Directed. , M&L For 150 Mm Bore Salt Glazed Stone Were (Sgsw) Drain Pipe Grade A Laid To Slope In Tranches And Jointed In Cement Mortar (1:1) Including Necessary Testing For Ensuring Teak Proofing Complete All As Specified And Directed. , M & L For Cutting Into Existing Manhole For Connecting New Drains And Making Good To Pipes And Rendering Cutting Out Existing Benching For And Forming Branching For And Forming Branch Channel (1/2 Round Or ¼ Section ) In Plain Cement Concrete 1:2:4 Type B-1 Using 20Mm Graded Crushed Stone Aggregate Smooth Finished And Reforming Benching As Specified And Directed For 150Mm Dia Of Pipe Complete All As Specified. , M&L For 60Mm Thick Machine Pressed Precast Concrete Interlocking Paver Block (Glossy Finish) Of M-35 Gde Of Approved Shape, Size And Colour Conferming To Is 15658-2006 And Laid Over And Including 25Mm Thick Grid/Sand Cushion Complete All As Specified And Directed. , S & F For Precast Cement Concrete Type B-1 (1:2:4) (20 Mm Graded Stone Aggregate) As In Kerb And Edging To Road And Footpath Etc, Including Chamfered, Weathering, Throating, Etc Setting In Cm(1:4) Complete All As Specified And Directed. , S & F In Repairs Ms Framed Work As In Doors Or Gates Of Angle Iron, Door Frame Or Other Section With Gusset Plate, Rails, Braces And Stair Case Etc Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering Etc, To Prepared For Hanging Or Sliding With Including Either Hooks And Hinges Also Fastening Grills, Grating, Hold Fast Of Doors And Windows Chowkat Etc, With Ends Of Bars Shouldered And Or Riveted, Or Forget Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework Of Water Tanksand Fixing And Similar Work Confirming To Fe 290 Gde E-165 Complete All As Specified And As Directed. , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing), And Rubbish Off The Premises Complete All As Specified And Directed. , M&L For Cement Concrete B1 1:2:4 (20Mm Aggregate) In Foundations, Filling And Mass Concrete Complete All As Specified And Directed. , M & L Cement Concrete Type B1 1:2:4 ( 20 Mm Graded Aggregate) As In Coping, Bearing Course, Manhole/ Drain Channels Etc In Including Necessary Formwork Complete All As Specified And Directed. , M&L For Preparation Of New Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , S&F 600Mmx450Mm Bevelled Edge Mirror Of Selected Quality Glass, Mounted On 6Mm Thick Ac Building Board Or Commercial Plywood And Fixed To Wooden Plugs With Chromium Plated Brass Screws And Cup Washers, Complete All As Specified And Directed. , M&L For Preparation Of Old Steel Surfaces Exc 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer, Complete All As Specified And Directed. , (Schedule-A Part-Ii E/M Works) Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And As Directed. , (Schedule-A Part-Ii E/M Works) Taking Down Carefully Unserviceable Aluminium Point Wiring Complete (Light, Fan Socket, Bell Or Power) With Fitting Such As Switches, Ceiling Rose Lamp Holder, Regulators, Sockets, Light Fittings Etc. And Keeping In Safe Custedy For Taking Credit Complete All As Specified And As Directed.
Contract Date: Jun 15, 2026 Contract Value : 31.73 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Jammu and Kashmir View Result →
38.
Defence #11213485 AOC
Tender For Additional / Alternator To P-266 Of 5 Afdc And Provision Of Misc E/M And B/R Services In Various Buildings And Certain Minor Works At Afs Pune Under Ge Af Lohegaon.; 1 Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roof covering all as specified and directed. 2 Dismantling timber in fillets rails, posts, rafters, purlins etc over 40 Sqcm in section in unframed work 3 S&F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. 4 S&F pre painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall/Eaves boards, fixed with self tapping screws as specified 5 S & F Rolled Mild Steelroof trusses(framed),trussed ,purlins ,rails and fastenings etc.,confirming to Fe 410 - S including distance pieces, cleats, etc., complete. 6 S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering.doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening andfixing complete (Eaves board fixing ) 7 S & F 6mm thick asbestos cement plain building boards fixed to steel frameowrk with screws all as specified and directed ( For Eaves Board). 8 S &F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410-w (Gde E-250 quality A) all as specified and directed. 9 M & L for Preparation of newsteel/iron surfaces of any description having width/girth exceeding 10cm and applying two coat of synthetic enamel paintover red oxide primer for material and labour complete all as specified. 10 M & LPCC B1 1:2:4 (12.5mm graded aggregate) for in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed. (Note :- Bed boxes and Coping on wall to fill up the gap) 11 Demolition of Brickwork or stone/boulder masonry/PCC bloack masanory,built in cement motar all as specified and directed. 12 S & F brick work with fly ash bricks,straight or cuved on plan exc 6m mean radius built in CM 1:4all as specified and directed. (Note : 1. For filling the Gap between sheet and wall 2. Clsoing of ventilaots ) 13 Dismantling of Wall and ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-charge 14 Material and labour for suspended false ceiling usinganodized aluminum snap grid frame work.Including Hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G I flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete. Perforated particle board/tiles for insulation and acoustic purposes, 60 x 60 cm size, fixed on snap grid 12mm thick confirming to IS 2095, 2995 Part I fixed with 25mm dry wall screws @ 230 mm C/C with screw driver to match surface attachment. Finally board have to be joined and finished to have a flush look using jointing compound/tape as per manufacturer instruction. With Designing as per direction in two steps complete all as specified and directed by Engineer in Charge. 15 M & L rendering 20mm thick on surface of stone masonary surface in CM 1:4and is to be finished even and smooth with out using extra cement complete all asspecified directed 16 M & L rendering 20mm thick on surface of stone masonary surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed 17 M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than than 50gm/litre and UV resistance as per IS 15489:2004 Alkali and fungal resistance, dirt resistance exterior paint or required shade with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @0.9 litre/10 sqm over new surfaces/old surfaces of wall all as specified and directed. 18 Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cmdeep and getting out hard dense soil 19 Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting poin 20 Hard coare of broken stone aggregate, of gauge n.exc 60 mm 21 M&L for cement concrete Type D -2 1:4:8 (40 mm graded agg) in foundation fillig/path and mass concrete 22 Formwork to sides of flat concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter 23 M&L Forming Contraction (Dummy) joints 30 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade A in plinth protection 24 Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) 25 S &F 605 x 605 mm Anodised aluminium snap grid frame work for false ceiling all as specified 26 Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm long complete all as specified 27 Dismantling boarding, any description, fixed in any position with nail 28 Taking down cement plaster on brick/stone/concrete surface including wall tiling and hacking out joints hacking for key scrubbing down with water etc complete 29 M&L rendering 15mm thick on surface of concrete surface in CM 1:6and is to be finished even and smooth with out using extra cement complete all asspecified directed 30 Demolition of stone / block masonry built in CM 1:4 31 M&L for precast solid cement concrete block masonry exc 10cm in width built with solid blocks Grade C1 (1:3:6 mix) and set in CM (1:6). 32 Preparing new wall surface, providing and applyingplaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth and applying two coats of oil emulsion 33 Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners withholdfasts and brackets, complete 34 S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 35 S&F Sheet glass 5.5 mm thick ordinary quality and glazing fixedin aluminium doors squareexc 0.5 sq. m in each pane 36 S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers 37 Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, 38 S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats 39 Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc 15cm thickness (below or above ground level) 40 M & L for 100mm thick PCC type B-2 (1:2:4) using 40mm graded aggbnas in flooring finshed even and smooth w/o using extra cement. 41 M & L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded agg finished even and smooth w/o using extr cement. 42 M & L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectamgular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors (Superior/ Premium quality), set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15mm thick screed bed in CM (1:6) complete all specified and directed. 43 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer in Charge. 44 M & L fire resistant paint on steel surface over a coat of primer complete alll as specified (Note: The primer is of same material of 1:1 dilution application) 45 S & F of mineral fibre reinforced false ceiling tiles (all height)of size 595X595 mm of approved texture, design and pattern. The tiles should have humidity risistance RH of 99%, Light resistance greater than 85% , thermal conductivity K=0.052-0.057 W/mK, Fire performnce As per (BS476 Pt-6&7) in true horizontallevel suspended on interlocking T-grid of hot dipped all around ganvanisedIron Section of 0.33mm thick (galvanised @ 120GSM)bcomprising of main T runner of 15 X32 mm of length 3000mm, cross T of size 15X32 mm of length 600mm to form grid module of size 600X600 mm suspended from ceiling using galvanised Mild steel item ( galvanised @ 80GSM) 50mm long 8mm outer dia M-6 Dash Fastner, 6mm diameter fully threaded hanger rod upto 1000mm length and L-shped level adjuster of size 85X25X2mm, spaced at 1200 mm center to center along main T, the system should rest on perpfery walls/ partition with the help of GI perimeter wall angle of size 24X24X300mm made of 0.40mm thick sheet, to be fixed to the wall with the help of the plastic rawl plug at 450mm center to center & 40mm long drywall S.S screws. The exposed bottom portion of all y- Sectionused in false ceiling support system shall be prepainted with polyster baked paints, for sll heigth. the work shall be carried outas per specification drawing adn as per the direction of the Engr-in-charge with 16mm thick Bevelled traingular Mineral Fibre faalse ceiling (NRC 0.5 to 0.6)) 46 Taking down and of chowkats or frames exc 1.5 sqm n exc 4 sqm each 47 S & F Anodised aluminium frame powder coated to (minimun thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. 48 S & F Anodised aluminium powder coated door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips,ruber neoprene packing, handk=les 2 Nos in each door, hinges, anodises aluminium snap beading screws etc. complete all as specified. 49 Cuting holes exc 150 sqcm but not exc 400 Sqcm into or through brick walls built in cement mortar of any description and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required 50 m&L two coats or Oil Bound distemper on Cement concrete surface over a coat of primer as per the shed directed by the engineer-ncharge, complete all as specified. 51 M&L for treating small articles such as ends of posts, holdfasts etc with tar or coal tar black paint; area exc 0.1 Sqm but n exc 0.5 Sqm each 52 S&F sheet in repairs glass 4.8 mm thick exc 0.5 sqm area ordinary quality and glazing with oil putty/rubber gasket fittings all as specified and directed. 53 M & L in repairs for 12mm Prelaminated particle board, interior grade, prilaminated both side with decorative choice lamination fixed with screws to timber/Aluminium frame work complete all as specified and directed. 54 S&F Rotational moulded polyethlene water storage tanks (cylindrical vergical with closed top) 1000 Ltr capacity hoisted and fixed in position including removal of existing damaged water tanks all as specified in SSR Part I 55 S & F in repairs 20 mmBrass valves ,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed 56 S&Fbib tap cast copper alloy chromium plated butterfly handle screwed down screwed for iron pipe completed (15mm dia tap). 57 S&F GI tubingof 15 mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 58 S&F GI tubingof 20mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 59 S&F GI tubingof 25mm dia medium grade with all fittings & fixed complete to walls and ceiling or laid in floors completeall as specified and as directed by the Engr-in-C. 60 S&F25 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 61 S&F20 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe 62 Dismantling wrought iron or mild steel work of any description not otherwise provided for. 63 S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 graded St 240 all as specified and directed.(Eaves Baords) 64 M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. 65 Demolition of Brick/precast concrete block/Stone/boulder masonary walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed 66 M&L TMT bars 10 mm and over cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified 67 M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) fair finished surfaces of concrete flat all as specified 68 M&L for reinforced cement concrete M 20 using 20mm crushed stone aggregate as in roof slabs supported on walls surfaces of concrete flat all as specified. 69 M&L for rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 and rendering is to be finish even and smooth with out using extra cement. 70 M&L for preperation of new concrete /plastered surface of any description, two coat of plastic emulsion paint over a coat of primer complete all as specified and as directed complete all as specified and as directed. 71 M&L for Powder Coated (Minimum thickness of powdercoating 50 micron)Anodised aluminium frame of standerd section for doors, windows, ventilators and partitions withdoublerebates including joining cleat for fixing etc. complete all as specified 72 S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge (For sliding window ) 73 M&L sheet glass 4.0mm thick figured glass, pin head type and glazing with aluminium beeds in square exc 0.50 sqm in each pane complete all as specified and as directed 74 M&L for vetrified ceramic tiles 10mm thick full body(Dark shade/Ultra Charged/Double charged ) (square/rectangular) polished, area of each tilesexc 1.00 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. 75 M&L for vetrified ceramic tiles 10mm thick full body(lightshade ) (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors over 15mm thick screed bed in CM 1:6 on floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade as specified and as directed. 76 S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediatechannel at 457 mm centre to centre and including Hangers 6 mm dia. G.I. (upto1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified 77 S&F for 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish(Frame work for ceiling shall be measured and paid separately) 78 Removal of existing Rifle racks including all fixing stell bolts and cement work all as specified work 79 M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:4 all as Specified 80 M&L for Providing precast cement concrete (20mm graded stone aggregate) 1:3:6 type C-1 as in solid building blocks 10cm thick setting in cement mortar,1:4 complete, in walls all as specified. 81 M & L for 25mm thick PCC 1:2:4,type B-0, (using 12.50 mm graded stone aggregate) as in under layer of tile flooring & finishing the surfacesrough to receive screed bed complete as specified and directed. 82 M&L for machine cut mirror polish kota stone slab flooring 20-25mm thick over 15mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. 83 M&L for machine cut mirror polish kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over 10mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners ,rubbing and mirror polishing complete as specified and as directed. 84 Fixing and grouting of new steel Rifle racks on the floor including necessary fixing bolts and necessary arrangements of grouting and grouting material all as specified. 85 M&L Hand rails, grills ,Gates ,half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof ,Brackets for Valley gutters ,including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 86 S&F for Mild steel ,plain black sheet of minimum 0.8mm thickness for Hoods cover for Rolling shutters;cladding to door shutters/Hangar doors ; water tank platforms etc with plain 40mm lap joints or welded/riveted seams including ,bending, turning up, mitred angles , stopped ends,outlets,etc. as required all as sprcified and directed by Engr-in Charge. 87 M&L for Cutting holes in brick/stone walls in mud/cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4Type B-1 as required all as specified and directed by Engineer-in-Charge. 88 Taking down the existing surface batten type point wiring of aluminium for Light, fan, Sockets, power sockets, stair case light pointcomplete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. including sorting out serviceable and unserviceable light fitting and keep serviceable fitting in safe guard for reuse as required on site. 89 Taking down the sub main wiring of any dia / sq mmon teak wood batten /PVC conduit GI earth wire all as directed. 90 Taking down cearfully byunscrewingthe unserviceable DB Boxes, MCB distribution boards SP & TPN with porcelain cutouts etc all as directed. 91 Material and labour for providing point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and capingwith all fittings/fixture etc andsurface typePVC box, cover plate all as specified and directed by Engr-In-Charge.(a) Onelight point controlled by one switch. 92 (b) One 3 pin socket 5 A on independent board. 93 (c) One 3 pin socket 5 A on same board. 94 Material and labour for providing point wiring with two runs of 2.5 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,with all fittings/fixture etc andsurface typeModular , PVC box cover plate, frame all as specified and ndirected by Engr-In-Charge. 95 S & F Sub Main Wiringwith FRLS PVC Insulatedmultistranded copper conductorwires ofsize2x6.0 sq. mm + 1x6.0 sq. mm earth wire in casing caping complete as directed.Note : for Item No 95 One run of phase wire one run of Neutral wire and one run of Earth wireand one run of casing and capping shall be meassured and as one length. 96 S&F sheet metal enclosure with socket plug top , single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP of capacity 20 Amps.including fixing concealed in wall and making good the disturbed surfacecomplete all as directed 97 Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 98 Supply and fixEnergy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 5700/6500K colour temperature with current electronic connections as directed 99 S&F MCB SP 240 volt 6 to 32 A C series complete 100 S &F for MCB SPN 40-63 Amps C curve and electric connections with copper thimbles complete all as specified and directed by Engr-in-Charge. 101 Supply and fix Modular switch 1 way 6A, 1 module 102 Supply and fixmodular Socket, 6A - 2/3 pin combined 2 moduler 103 Supply and fixModular switch 1 way 16A, 1 module 104 Supply and fixmodolar Socket 6A/16A - 2/3 pin combined2 module, 105 Supply and fix ceiling rose surface type bakelite/PVC three terminal 65x50mm 106 S & F Modular white cover plate with frame 2 Module 107 S & F Modular white cover plate with frame 3 Module 108 S & F Modular white cover plate with frame4 Module 109 S & F Modular white cover plate with frame 6 Module 110 S & F Modular white cover plate with frame 8 Module 111 Supply, Fixing , Testing and Commissioning of Single phase isolation transformer to be installed at input power supply of L-2 switch,via 16 Amps MCB and with power earthing point specification as follows 1Ph, Capacity 1KVA, Input 230V AC ±10%,Output 230V±10%,50 Hz,cooper wire,work efficiency more than 95%,potential between earth to neutral less than 1 Volt with all standard fitting as per direction of Engineer in charge 112 Supply, Fixing , Testing and Commissioning ofIsolation transformer of capacity 5 KVA, single phase ,50 Hz , Copper wound , Air cooled , class of insulation A ,metallic body duly powder coated designed for input Voltage range 240+-5% and output voltage range 240+-5% ,Ratio 1:1 , indoor , efficiency more than 95 % , Potential difference between neutral to earth less than one volt with all standard fittingsas per direction of Engineer in charge 113 Supply, Fixing , Testing and Commissioningof Three Phase Surge Protector Device to be installed at input power supply of L-2 switch all as specified and directed by Engr-In-Charge 114 S&F wall mounted Industrial grade metal enclosure box made from 3mm thick CRCA sheet consist of following Items:-(a) Panel mounting Industrial grade socket/plug outlet 16 A,IP44(b) SPD ,1.5kv,320A,20kA - 1 Nos(c ) MCB SP 16 A- 1 Nos 115 S&F Vertical double door Distribution board TPN 4 way 125 A rated busbarconsisting ofMCCB. 63 A 18KA - 1 Noincluding fixing on wallsurface and making good the disturbed surfacemaking all nacessary incomming and out going connections using proper size copper thimblescompleteall as required on site all as directed 116 Supply and fixing in replacement sheet metal enclosure with DBs ( grouted in walls) double door type for MCBs 12 ways with 200 Amps 240 volts rated bus bar incl taking down old DB all as specified. 117 Material and labour for taking down serviceable Fire Alarm panel from one location and re-install the same at same /another location including fixing brackets/nut bolts incl testing and commessioning of the same all as specified and directed 118 Material and labour for taking down serviceable Smoke / Heat / Fire detector from one location and re-install the same at same /another location including necessery cable upto Fire alarm panelincl testing and commessioning of the same all as specified and directed 119 Supply and fix adressable smoke Detectors Complying with and type certified to EN-45 type multisensor detector with heat and smoke combination Photoelectric / Optical with base with self built intelligence as per IS: 11360 all as specified. 120 Supply, install, testing and comissioning of adessable break glass manual call pointincluding sunken boxes, with built in monitor module will all acessories and signal indicator complete as per tech specification and shall be UL listed complete. 121 Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1.5 sq mm ,4 core, 1100 Volts grade. 122 Material and labour for taking down serviceable split AC of capaicty upto 2.0 TR from one location and re-install the same at same /another another location including fixing brackets, gas charging, brazing and additional required copper piping incl testing and commessioning of the same all as specified and directed 123 Supply, Install testing and commessioning Single pole and neutral enclosure 240 Volts with a two pin and earth plug and socket complete with one single pole MCB 20 Amp all as specified and directed 124 Material and labour for providing point wiring with two runs of 4 Sqmmmulti stranded copper conductor FRLS PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core copper stranded FRLS PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping,ISI Marked complet for housing one 15 to 20 A Switch / socketscomplete 125 Supply, Install , Testing and Commissioning of wall mounted enclosure box made from 3mm thick CRCA sheet enclosure consist of following items for 3 Phase 2 AC timer & Controller of Auto switching timer unit suitable for operate 8.75 TR package type AC:-(a) Timer - 1 No(b) Contactor 32 amps - 2 No(c ) Indication lamp - 1 No
Contract Date: Jan 09, 2026 Contract Value : 44.46 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 2
Maharashtra View Result →
39.
Power #11206303 Price Bid
Tender for Contract For Supply Of Key Materials Required For Maintenance Of 33/11Kv Receiving Stations Along With Their Lines Under The Jurisdiction Of Std Bijbehara During The Year 2026-27 , Electrical Store/Workshop Items/: As Per Is Standards , 11 Kv Vcb Panel Board 12 Kv, 1250A, 25 Ka, Outdoor (Incommer) As Per Technical Specifications Of Rec Std , 11 Kv Vcb Panel Board 12 Kv, 1250A, 25 Ka, Outdoor (Outgoing) As Per Technical Specifications Of Rec Std , 33 Kv Vcb (36 Kv, 1250A, 26.2 Ka, Outdoor Type) As Per Technical Specifications Of Rec Std , 33 Kv C&R Panel With Nemurical Relays With Differential Relay ( Iec 61850), Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps, Dlms Compliant As Per Technical Specifications Of Rec Std , 33 Kv C&R Panel With Nemurical Relays With Out Differential Relay ( Iec 61850), Voltmeter, Ammeter, Annunciation Windows With Annunciation Relays, 3-Phase Tri-Vector Meter -5 Amps, Dlms Compliant As Per Technical Specifications Of Rec Std , 33 Kv Isolator With Earthing Blade (36Kv,1250A, Outdoor, 3 Poles, 25 Ka) , 33 Kv Isolator Without Earthing Blade (36Kv,1250A, Outdoor, 3 Poles, 25 Ka) , 33 Kv Outdoor, Oil Cooled, Live Tank, Single Phase , 3 Core Ct Set As Per Isi Specification With Accuracy Class Sp 10 For Protection,0.5 For Metering & Ps For Differential With Ratio 800-400/5-5-5A ,600-300/5-5-5A , 500-250/5-5-5A, 400-200/5-5-5A (Per Set Of 3 Pieces) , 33 Kv Outdoor, Oil Cooled, Copper Wound , Single Phase , Pt Set With Rated Primary Voltage 33000/√3 & Rated Secondary Voltage 110/√3 As Per Isi Specification With Accuracy Class 0.5 (Per Set Of 3 Pieces). , 33 Kv Lightening Arrestors (30 Kv, 10Ka, Station Class, Zno, Porcelain/Polymer) Gap Less(Per Set Of 3 Pieces). , 33 Kv Post Insulator (Polymer/Porcelain 36Kv, 170Kv Impulse) , Galvanised Steel Structures(6 G I Pipe With Top,Base & Grouting Bolts) As Per Rec , 11Kv (E) Grade Armoured ,Almunium,400 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 11Kv (E) Grade Armoured ,Almunium, 300 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 11Kv (E) Grade Armoured ,Almunium,240 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 11Kv (E) Grade Armoured ,Almunium, 185 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 11Kv (E) Grade Armoured ,Almunium, 120 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 2.5 Sqmm 2 Core Control Cable Armored , Copper Conductor Sheathed Pvc Insulated Multi Colour Voltage Grade 1.1 Kv (Std Make) , 2.5 Sqmm 4 Core Control Cable Armored , Copper Conductor Sheathed Pvc Insulated Multi Colour Voltage Grade 1.1 Kv (Std Make) , 2.5 Sqmm 6 Core Control Cable Armored , Copper Conductor Sheathed Pvc Insulated Multi Colour Voltage Grade 1.1 Kv (Std Make) , 2.5 Sqmm 8 Core Control Cable Armored , Copper Conductor Sheathed Pvc Insulated Multi Colour Voltage Grade 1.1 Kv (Std Make) , L T Cable 3 1/2 16 Sq.Mm Core Armored , Al Conductor Sheathed Pvc Insulated (Std Make) , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Or Raychem Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Indoor 400Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Indoor 300Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Indoor 240Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Indoor 185Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Indoor 120Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Outdoor 400Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Outdoor 300Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Outdoor 240Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Outdoor 185Sqmm , 11Kv 3 Core Cable End Termination Kits Of Sizes,Heat Shrinkable Of 3M Std Make Required For 3 Core Xlpe Cables, Including Required Size Of Lugs/Thimbles, As Per Isi Specification Outdoor 120Qmm , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 630 Sqmm; Outdoor , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 400 Sqmm; Outdoor , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 300 Sqmm; Outdoor , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 240 Sqmm; Outdoor , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 400 Sqmm; Indoor , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 300 Sqmm; Indoor , 33 Kv 3 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 240 Sqmm; Indoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 630 Sqmm; Outdoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 400 Sqmm; Outdoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 300 Sqmm; Outdoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 240 Sqmm; Outdoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 400 Sqmm; Indoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 300 Sqmm; Indoor , 33 Kv 1 Core Cable End Termination Kit Of Sizes , Outdoor 3M Std Make , Heat Shrinkable Including Required Size Of Lugs/Thimbles ,As Per Isi Specification 240 Sqmm; Indoor , 11 Kv Vaccum Interruptor Confirming To Iec62271-100, Gb 1984-2003 Standard Having Current Carrying Capacity 1250Amps Suitable For Bhel,Crompton Greeves,Alsthom,Abb, Electric Field, Sudhir Or The Like , 11 Kv Indoor Type,Dry,Resin Cast, Single Phase , 2 Core Ct Set As Per Isi Specification With Accuracy Class Sp 10 For Protection & 0.5 For Metering Preferably Of Bhel/Crompton Greaves/Alsthom/Allind /Er Make Electric Field/ Sudhir Make Having) With Ratio 800-400/5/5,600-300/5-5,400-200/5-5 (Per Set Of 3 Pieces). , 11 Kv Indoor ,Dry, Copper Wound , Three Phase , Pt Set In Ms Enclosure With Rated Primary Voltage 11000/√3 & Rated Secondary Voltage 110/√3 As Per Isi Specification With Accuracy Class 0.5 , 11 Kv Lightening Arrestor Set( Station Type),Outdoor, Metal Oxide Gapless As Per Isi Specifications.(Per Set Of 3 Pieces). , Digital Protection Relay Non-Communicable Model Type 141A (Ashida/Er Make) 3 O/C +1 E/F For 11Kv Vcb Switch Gear Like Bhel/Crompton Greaves/Alsthom/Allind /Er Make Electric Field/ Sudhir Make . Auxillary Voltage 30V Ac/Dc Confirming To Iso 9001:2008 Standards. , Master Trip Relay 24-50V For 11Kv Vcb Switch Gear Like Bhel/Crompton Greaves/Alsthom/Allind /Er Make Electric Field/ Sudhir Make. , 36V , 200Ah Battery Bank (Comprising Of 3 No Batteries Of 12 V Each) Conforming To Iec60896-21/22, Lead Acid Type Of Exide Make , 36 V,200 Ah , Float-Cum-Boost Battery Charger,Copper Wound,Air Cooled, With Full Wave Rectification With Heat Sink & 40A Diodes, Ae Make Measuring Instruments, 16Swg Steel Body Sheet, For 15A,220 V, 1Phase, 50 Hz Ac Input Supply Along With Ac/Dc Terminal & Earthing Slot, Correction Time 10Sec, Std Make , 5Kva Servo Motor Control Voltage Stablizer With Input 100V & Output 220V,Air Cooled,50 Hz,16Swg Steel Body, Copper Wound , Correction Time 10 Sec, Std Make , Auxillary Switch Suitable For 11Kv Vcb Panels Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field Or The Like , Panel Bush For 11Kv Vcb Panels Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field Or The Like , Breaker Bush(Bus Bar Spout) For 11Kv Vcb Panels Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field Or The Like , Interruptor Housing For 11Kv Vcb Panels Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field Or The Like , Limit Switch For 11Kv Vcb Panels Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field Or The Like , Breaker Contact/Female Contact For 11Kv Vcb Switch Gear Like Bhel/Crompton Greaves/Alsthom/Allind /Er Make Electric Field/ Sudhir Make , 36V Tripping Coil For 11Kv Vcb Breaker Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field, Sudhir Or The Like , 36V Closing Coil For 11Kv Vcb Breaker Like Easun Reyroll, Allind, Alsthom, Crompton Greeves, Electric Field Sudhir Or The Like , Digital Ammeter/Voltmeter (Programmable)For 11Kv Vcb Panels , Panel Indicators , Ammeter Selector Switch Of 11Kv Vcb , Tnc Switch Of 11Kv Vcb , Spring Charging Motor Of 11Kv Vcb Breaker , Spring Charging Motor Of 33Kv Vcb Breaker , Gears For 11Kv Vcb Of Different Make(Big) , Gears For 11Kv Vcb Of Different Make(Small) , Dc Delco Motor For 33 Kv Vcb , Dc Delco Motor For 11 Kv Vcb , Transormer Oil As Per Is For Power Transformers,Cts,Pts Etc , Distilled Water For Battery Bank , Almunium Alloy Clamps Of Sizes Like Ct,Pt,Pad,Isolator,La,T Etc For 100/200Mmsq Acsr , 33 Kv Vaccum Interruptor Confirming To Iec62271-100, Gb 1984-2003 Standard Having Current Carrying Capacity 1250 Amps Suitable For Bhel,Crompton Greeves,Alsthom,Abb,Megawin,Sudhir Or The Like , 33K Vcb Bushe Complete Assembly Confirming To Is:2099 Standard , 33Kv /11 Kv Bushes Of Power Transformers Complete Assembly Confirming To Is:2099 Standards , 11Kv/ Lv Bushes Along With Bush Rods Of Auxillary Transformers Complete Confirming To Is: 2099 Standards , 33Kv P.T Bushes With Complete Assembly Confirming To Is:2099 Standards , 33Kv C.T Bushes With Complete Assembly Confirming To Is:2099 Standards , 33Kv C.T Bush Rod , 33Kv Isolator Grovees(Knife/Tubular Type) Complete , Almunium Tubular Bus Bar As Per Rec , 11Kv G.O Set 400 Amps , 11Kv Isolator, Double Break,3-Pole, 600Amp, Horizental Mounting Type, With Earth Switch. , 11Kv Link Set,Copper Knife(50X6x450)Mm,400 Ampers, Complete With Clamps , 33Kv Link Set,Copper Knife (50X8x600)Mm,800 Ampers, Complete With Clamps Heavy Duty , 33Kv Do / Fuse Set , Distribution Panel (30V, Dc) With 1 No.10Amp. Mccb. Double Pole For Battery Incoming Supply With Dp Mcbs & Indicating Lamps Etc. , Distribution Panel (415 V, Ac) Complete With Ckt. Breakers, Indicating Lamps Etc. , Led Lamps Of Control Room Building ( 9-15 Watts) , Led Lights For Yard( 50 Watts) , Almunium Paint , Red Oxide Paint , Almunium Thimbles Of Sizes(120-600 Sqmm) , 11 Mtr Long S.T Poles (410Sp- 56) Complete With Base And Cap As Per Rec Standard And Specifications , 9 Mtr Long S.T Poles (410Sp- 33) Complete With Base And Cap As Per Rec Standard And Specifications , 13 Mtr Long S.T Poles (410Sp- 69) Complete With Base And Cap As Per Rec Standard And Specifications , 0.2 Acsr (Panther) Conductor , 0.15 Acsr (Wolf) Conductor , 0.1 Acsr (Dog) Conductor , 0.05 Acsr (Rabbit) Conductor , Fabricated Galvanised V -Type Channel Iron X-Arm,6-10 Long Ch Iron,Channel Iron Top,Angle Iron Belts, Clamps & Flat Braces Etc As Per Rec Standard For 33/11Kv Lines. , 33Kv Polymeric Composite Pin Insulator 36Kv,10Kn,Lighting Impulse 170Kv Positive & 180 Kv Negative,Creepage Distance 900Mm , 33 Kv Polymeric Composite Disc Insulator 36Kv,Min Failing Load 70Kn,Lighting Impulse 170Kv Positive & 180 Kv Negative,Creepage Distance 900Mm Suitable For 0.1 Acsr Conductor , P G Clamps For 200/150/100Mm Sq Acsr , 33 Kv Danger Plates With Clamps , Anticlimbing Devices With Clamps , Gal Nuts & Bolts With Washers , Earthing Complete By G I Pipe 40Mm Or G I Rod 20Mm 2.5 Mtr Long Through G I Strip As Per Rec Standard , Galvanised Stay Set With 50X8mm Stay Clamps,Guy Insulator,Anchor Plat(300X300x8)Mm,Nuts/Bolts ,Turn Buckle,1.8 Mt Long 20Mm Dia Sold Gs Stay Rod & 7/4.0Mm Dia Gi Std Wire Complete , Guard Netting As Per Rec Standard , Galvanised Spiral Earthing Of Swg No. 8, G.I Wire Of 115 Turns Confirming To Rec-J1 Construction Standard , Porceline 70 Kn Disc Insulator , Porceline 45 Kn Disc Insulator , Porceline 33Kv Insulators (10 Kn) , 33Kv G.I Pins With All Accessories Weighing 2700 Gms , 33Kv Rubber Gloves For Protection Of Electric Shockproof Insulated Hand Rubber , 11Kv Rubber Gloves For Protection Of Electric Shockproof Insulated Hand Rubber , Electrical Insulating Rubber Mat 6Mm Thickness(1Mrx2mtr). , 63 Kva ,11/0.433Kv, 3-Phase Distribution Transformers With Bimetallic Terminal Connectors Energy Level-2, (Aluminium Wound Upto 200Kva, Copper Wound For 250Kva Or Higher Kva Ratings) , And With Lv Cable Box Having Detachable Aluminium Gland Plate , 100 Kva ,11/0.433Kv, 3-Phase Distribution Transformers With Bimetallic Terminal Connectors Energy Level-2, (Aluminium Wound Upto 200Kva, Copper Wound For 250Kva Or Higher Kva Ratings) , And With Lv Cable Box Having Detachable Aluminium Gland Plate , Digital Three Phase Voltmeter , Porceline 11Kv Insulators , 11 Kv G.I Pins With All Accessories , Coper Bus Bar , Drill Bilts Of Sizes 3/4 And 1 , Hexa Blade , Round Hexa Blade , Welding Rods , Bush Rods For 10Mva, 6.3 Mva , Monoplastic Tape Rolls , 11Kv Pannel Hrc Fuses , Ac/Dc Mccb Of Different Ratings , Oil Temperature Indicator Of Reputed Make For 33/11-6.6Kv Power Transformers , Winding Temperature Indicator Of Reputed Makefor 33/11-6.6Kv Power Transformers , Standard Quality Silica Gel For Various Capacity 33/11Kv Power Transformers , Breaker Mechanism Of Reputed Make , 33Kv Polymeric Composite Pin Insulator 36Kv,10Kn,Lighting Impulse 170Kv Positive & 180 Kv Negative,Creepage Distance 900Mm Sauitable For 0.15/0.2Acsr , 2.5 Sqmm 12 Core Control Cable Armored , Copper Conductor Sheathed Pvc Insulated Multi Colour Voltage Grade 1.1 Kv (Std Make) , 33Kv Grade, 1 Core Heat Shrinkable Jointing Kit, Including Required Size Of Lugs/Thimbles, As Per Relevent Is Specification 7098 (Part-Ii) 3M/ Raychem Suitable For 630/400/300Sqmm , Buchholz Relay For 33/11-6.6Kv Transformer Protection , Twin Bimettalic Clamps Aaac Equivalent 8 Bolt Type With Four Outputs As Per Relevant Is Standard Suitable For 01/0.2Acsr , Ht Tape Roll As Per Is Standard With Latest Ammendments , Indication Lamps Suitable For 33/11Kv Panel Board Ike Bhel/Crompton Greaves/Alsthom/Allind /Er Make Electric Field/ Sudhir / Pascal/Hartek Make , Monoplast Tape As Per Is Standard With Latest Ammendments , Lt Insulation Tape As Per Is Standard With Latest Ammendments , Old Sarees , Earthing Electrodes As Per Is Standard With Latest Ammendments , 11Kv Auxillary Relays. , Al Alloy Tension Fittings Suitable For 50/100/150/200 Sqmm Acsr As Per Rec , Almunium Folded Ladder , Bus Bar Type Clamp For Connecting Ic Cable Outdoor , Water/Snow Resistant Shoes (Tsf Make Or Any Equivalent Brand) , Rain Coat Long Size Over Coat Type (Size 4Xl) , Umberlla Big Size , Safety/ Industrial Helmet With Straps Isi Mark, With Head Lamp Bracket And Detachable And Interchangeable Led Headlamp Alongwith Charger/Charging Facility(Color:- White , Blue And Yellow ) , Chainsaw Cutter Heavy Duty 1800-2500 W , Chainsaw Cutter Heavy Duty (Portable) 1000-1500W , Searchlight Heavyduty (Eveready, Panasonic/Philips Or Equivalent) , Heat/Flame Gun Metallic For Cable Kit Shrinking With Portable Butane Gas Can 225G Of 01No. , Butane Gas Cartridges/Canisters, Refill Fuel For Welding Torch, 225G , Electric Heat Gun For Cable Kit Shrinking 1000-200 Watt , Heavy Duty Tool Kit (Flat/Round Spanner Set, Plier, Screw Driver Set, Wire/Cutter/Striper, File With Torque Spanners Set Etc Complete Set) , Al. Ladder Foldable 2X20 Ft. Telescopic Portable Ladder , Digital Megger 5 Kv , Digital Megger 2.5 Kv , Cork Sheet 4Mm , 2V Battery 100Ah Vrla Type Of Standard Make , 2V Battery 200Ah Vrla Type Of Standard Make , 12V Battery 200Ah Lead Acid Type Of Standard Make , 33 Kv Current Transformer Outgoing/Incomer (33 Kv, 1Φ, Multi Ratio Multi Core 600-300/1A, Indoor Type) (1 No. Per Φ) For Gis Compatible 33/11Kv Station Panel Mounted At Pahalgam , 11 Kv Current Transformer Outgoing (11 Kv, 1Φ, Multi Ratio Multi Core 200-400/1A, Indoor) (1 No. Per Φ) For Gis Compatible 33/11Kv Station Panel Mounted (Pahalgam) , 11 Kv Current Transformer Incommer (11 Kv, 1Φ, Multi Ratio Multi Core 900-600/1A, Indoor) (1 No. Per Φ) For Gis Compatible 33/11Kv Station (Pahalgam) , 33 Kv Single Core Indoor Cable Kit ( Plug In Tremination Type And Screened Seperable Connectors ) For 400 Mmsq Cable For Gis Compatible Substaion (Brand:- Euromold, Nexans, Raychem Etc) , Plug-In Termination Kit (C Bushing Elbow Connector) To Suit 33Kv 1Corex400nmsq,Nndia:39.0-48.5Mm Model:-M484tb/G, Complete Set Of 3 No.S With All Accessories Including-(3Boot+3 Mechincalconnectors) Of Standard Make For Gis Compatible Substation , Plug-In Termination Kit (C Bushing Elbow Connector) To Suit 11Kv 1Corex 400Mmsq,Ins Dia:39.0-48.5Mm Model:-M484tb/G, Complete Set Of 3 No.S With All Accessories Including-(3Boot+3 Mechincalconnectors) Of Standard Make For Gis Compatible Substation , Inner Core Plug In Termination Kit To Suit Size-3-Lcx630mmsq 12/20(24Kv) installation Dia: 34.0-45.06 Complete Set With All Accessories Per Set Of 3Nos Of Standard Make Gis Compatible Substation , 33Kv (E) Grade Armoured ,Almunium,400 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium, 300 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium,240 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium, 185 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium, 120 Sq Mm,3-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium,630 Sq Mm,1-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium,400 Sq Mm,1-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium, 300 Sq Mm,1-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium,240 Sq Mm,1-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium, 185 Sq Mm,1-Core,Xlpe Power Cable, (Std Make) , 33Kv (E) Grade Armoured ,Almunium, 120 Sq Mm,1-Core,Xlpe Power Cable, (Std Make) , 11Kv 3 Core Cable Jointing Kit Of Sizes 185/240/300/400 Sqmm , 11Kv 1 Core Cable Jointing Kit Of Sizes 185/240/300/400/630 Sqmm , ⁠630 Mmsq Hydrolyic Crimping Tool , ⁠Electric Grinder 700 To 1000 W Of Standard Make , Electric Digital Welding Machines (Portable Of 100 - 250 Amps , 11Kv Cable Jointing Kit , Oil Pump Manual Of Standard Make For Transformers , Foam Spray Sealant Tins Of 450Ml , Vaseline/Grease , 11Kv Cts Of Different Ratios And Make Like Electricfield, Pasxcal, Sudhir, Stelmac Etc.) , T Clamps For Acsr 200Mmsq , Retaining Pins, Lock Nuts Of Sizes, External Retaining Rings(Rotor Clips, E Clips, C Clipso/S, Split Pins/Cotter Pins O/S , Single Phase 1 Hp Water Motor Of Standard Make
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 4
Jammu And Kashmir View Result →
41.
Defence #11200251 Technical Bid
Tender For Provision Of Certain Sanctioned Works Under Ge South Bathinda At Bathinda Mil Stn.- 1 Surface Excavation N.Exc (Not Exceeding) 30 Cm Deep And Averaging 15Cm Deep And Getting Out And Getting Out In Soft / Loose Soil Complete All As Specified & Directed. 2 Removing Excavated Material Exc 1.50 Km N Exc. 5 Km And Depositing Where Directed At A Level N Exc. 1.5 M Above The Starting Point Complete All As Specified And As Directed. 3 Excavation In Trenches Not Exceeding 1.5 Meter Wide And Not Exceeding 1.5 Meter Depth For Foundation Etc Or For Shafts , Wells, Cesspits, Manholes , Septic Tank, For Laying Of Cables , Laying Of Pipes Not Exceeding 10 Sqm On Plan And Not Exc 1.5 Meter Depth And Getting Out In Soft/Loose Soil Etc Complete All As Specified And As Directed By Engineer-In- Charge. 4 Material And Labour For Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 5 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Foundations, Including Rafts, Footings, Foundation Beams; Plinth Beams; Bases For Columns, Etc.; Basement Slabs, Under-Reamed Piles And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 6 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Columns, Pillars, Piers, Posts And Struts Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 7 Material And Labour For Rcc M-25 (Design Mix) Using 20 Mm Graded Stone Aggregates As In Beams, Cantilevers, Bressummers, Lintels Over 1.5 M Span And The Like Etc Complete All As Specified And As Directed By Engineer-In-Charge. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 8 Material And Labour For Rcc M-25 (Design Mix) Using 20Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors,Roofs, Landings, Balconies,Canopies, Deck Slabs And In Shelves And The Like Complete All As Specified And As Directed By Engineer-In-Charge.Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 9 Material And Labour For Formwork Of Sides Of Concrete Foundations, Footings, Bases Of Columns, Raft And Raft Beams, Sides And Soffits (If Any) Of Foundation And Plinth Beams; And Similar Work; Vertical Or To Batter On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 10 Material And Labour For Formwork In Square,Reactangular Or Polygonal On Rough Finished Surface Of Concrete To Sides Of Pillars, Posts, Struts, Piers, Columns And Stanchions Complete All As Specified And As Directed By Engineer-In-Charge. 11 Material And Labour For Formwork To Sides And Soffits Of Floor Or Roof Beams, Beam Haunchings, Girders, Bressummers, Lintels, Cantilevers, Shelves Including Supports, Overhangs, Etc. Also Splays Between Floors And Beams, Etc. On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 12 Material And Labour For Formwork To Soffits Of Suspended Slabs Such As Roof Slab, Floor Slabs, Landings And Similar Work Not Exceeding 200 Mm Thick (Horizontal Or Sloping) On Rough Finished Flat Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 13 Material And Labour For Formwork To Edges Of Concrete Flats, Treads, Breaks In Floors,Window Cills, Concrete Rail Ings, Openings In Concrete Walls, Floor And Roofs Not Exceeding 20Cm Wide And Sides Of Rcc/Pcc Bands In Walls, Horizontal Or Sloping And Similar Work Exceeding 10 Cm But Not Exceeding 20Cm Wide On Rough Finished Surfaces Of Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 14 Material And Labour For Mild Steel Tmt Bars 10Mm Dia And Over Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 15 Material And Labour For Mild Steel Tmt Bars 6Mm To 8Mm Dia Cut To Length Bent To Shape, Required Including Cranking, Bending Spirally For Hoping For Columns, Hooking Ends And Binding With Mild Steel Wire (Annealed) Not Less Than 0.9Mm Dia Including Making Of Rungs, Handles Etc Complete All As Specified And As Directed By Engineer-In-Charge. (Note : Weight Of Binding Wire Shall Not Be Considered For Measurement And Payment Purpose.) 16 Demolition Of Brick Work Or Stone / Boulder Masonry, Built In Cement Mortar Or Cement Lime Mortar Including All Quoins, Arches, Pillars, Etc, In Any Description Complete All As Specified And As Directed By Engineer-In-Charge. 17 Material And Labour For Brick Work With Sub Class ‘B’ Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 18 Material And Labour For Brick Work With Fly Ash Bricks Straight Or Curved On Plan Exceeding 6.0M Mean Radius Built In Cement Mortar 1:6 Complete All As Specified And As Directed By Engineer-In-Charge. 19 Material And Labour Brick Work With Sub Class ‘B’ Old Size Burnt Clay Bricks Straight Or Curved On Plan Exceeding 6 Metre Mean Radius Built In Cement Mortar 1:6, Complete All As Specified And As Directed By Engineer-In-Charge . 20 Material And Labour For Brick Work With Fly Ash Old Size Bricks, Straight Or Curved On Plan To Any Radius In Half Brick Walls Built In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In-Charge. 21 Demolition Of Cement Concrete (Unreinforced) In Ground Floor And Paving Not Exceeding 15Cm Thickness Below Or Above Ground Level Of Any Description And In Any Position Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge 22 Material & Labour For Cement Concrete 1:3:6 Type C-2 Using 40 Mm Graded Stone Aggregate For Foundations, Fillings & Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 23 Material And Labour For Cement Concrete (1:5:10), Type E-2 Using 40 Mm Graded Stone Aggregate As In Filling Of Sunken Floors Complete All As Specified And As Directed By Engineer-In-Charge. 24 Demolition Of Concrete Of Any Description And In Any Position Not Otherwise Specifically Provided Complete All As Specified And Directed. 25 Material And Labour For Waterproofing Treatment To Sunken Floor Using Acrylic Based Multipurpose Polymer. The Treatment Shall Be Carried Out As Per Manufactures Specification. The Treatment Shall Be Include Of The Following Elements Also: 1. Surface Preparation Of Substrate By Removing All Traces Of Contaminates, Loose And Friable Particles, Cement Laitance Oils And Grease, Water Repellent Coatings Etc2. Injection Grouting Using Cementitious Grout If Required. The Payment For Injection Grouting Shall Be Made Separately Etc3. Repair To The Substrate, Filling Of Blow Holes/Voids And Surface Leveling Using Appropriate Products Specified By The Manufacture.4. All Intersections Of Horizontal And Vertical Surface Should Be Profiled With A Mortar Fillet Of Minimum 25Mm X 25Mm.5. The Moisture Content Of The Substrate Shall Be Checked Before Application Of First Coat At Water Proof Coating At The Rate Of 200 G/M2 Followed Brush Topping At 450G/M2 Per Mm. The Second Coat Shall Be Reinforced With Glass Fabric Between The First And Second Coat.6. The Treatment Shall Be Protected By Application Of Polymer Modified Cement Mortar Of Thickness 10Mm Applied At The Rate Of 50G Per Mm.7. Tech Specification : Tensile Adhesion Strength 0.5N/Sqmm (As Bonding Slurry). 26 Material And Labour For Aerated Autoclaved Concrete (Aac) Blocks Work According To Indian Standard Specification Is:2185(Part-3)-1984 And Latest Revision Built In Cement And Sand Mortar 1:6 With Aerated Autoclaved Concrete (Aac) Blocks Straight Or Curver On Plan Exceeding 6Mtr Mean Radius As In Sunken Floor Complete All As Specified And And As Directed By Engineer-In-Charge. 27 Supply Only Integral Water Proofing Compound. 28 Removing Excavated Material As In All Kind Of Soils Not Exceeding 50M And Depositing Where Directed At A Level Not Exceeding 1.5M Above The Starting Point Complete All As Specified And As Directed By Engineer-In- Charge. 29 Returning Filling In Any Type Of Soil, Including Spreading, Levelling,Watering And Well Ramming In Layer Not Exceeding 25 Cm In Each Layer, Complete All As Specified And As Directed By Engineer-In- Charge. 30 Material And Labour For Sand Filling Under Floor Or In Foundation Including Spreading Levelling, Watering And Well Ramming In Layers Not Exc 25 Cmetc Complete All As Specified And As Directed By Engineer-In- Charge. Note: Sand Shall Be Approved By Ge. 31 Material And Labour For Hard Core Using Broken Stone Aggregate Of Gauge Not Exc. 63Mm, Deposited Spread And Leveled In Layers Not Exc. 150 Mm Thick, Watered And Rammed To A True Surface Complete All As Specified And As Directed By Engineer-In- Charge. 32 Material And Labour For 75 Mm Thick Cement Concrete 1:4:8 , Type D-2 Using 40 Mm Graded Stone Aggregate As In Sub Base Of Floor. Finished Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 33 Material And Labour For Rendering 10 Mm Thick In Cement Mortar 1:6 On Fair Faces Of Brick Work Or Concrete Surfaces Of Walls And Finishing The Surface Even & Fair Faces Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 34 Material And Labour For Rendering 5 Mm Thick In Cement Mortar In (1:3) On Ceiling And Finishing The Surface Even & Smooth Without Using Extra Cement Complete All As Specified And Directed. 35 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 36 Material And Labour For 15Mm Thick Rendering In Cement Mortar 1:4 On Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Fair & Even Mixed With Liquid Water Proofing Compound As Per ManufacturerS Instructions But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. Note :- Liquid Water Proofing Compound Shall Be Measured And Paid Separately. 37 Supply And Fixing Chicken Wire Mesh ( Murga Jali ) In Cement Plaster Or Over Joints Of R.C.C And Brickwork Or As Per Site Requirement Of 24 Gauge & 12 Mm Mesh And 300 Mm Width For Construction Joints And Chasing In Brick Work For Electrical Conduits Or Water Supply Pipes And Pegs/Nails With Nailing Machine As Required Before Rendering / Plastering Etc. Complete As Per Site Requirement Complete All As Specified And As Directed By Engineer-In- Charge.Note: Rendering / Plastering Shall Be Measured And Paid Seperately Under Serial Item No. 5.00 Of ScheduleA Boq Here-In- Before. Nothing Shall Be Paid Extra On Account Of Rendering / Plastering In This Item. 38 Material And Labour For Applying Acrylic Wall Care Putty On Internal Surfaces And External Surfaces Of Walls/Ceilings/Soffits (Thickness Vary From 1.5 To 2.5 Mm As Required For Desired Smoothness And Leveling Of Surfaces In Two Or More Layers) By Using Ready Made Acrylic Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc Complete All As Specified And Directed By Engineer-In- Charge.Make Of Acrylic Wall Care Putty : As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After.Notes : (I) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. (Ii)The Make Of Acrylic Wall Care Putty Shall Be As Per The Recommendation Of Manufacturer Of Paint. 39 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 40 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying 01 Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Existing Shade @ 10 Sqm/Litre/1 Coat By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits ( Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc, Over Including A Coat Of Exterior Wall Primer @ 10 Sqm/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Including Removing The Vegetation Of Any Type And Description The Making The Surface Good Complete All As Specified And Directed. 41 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Interior Acrylic Emulsion Paint (Light Shade As Approved By Ge ) @ 10.00 Sq.M/ Litre / 2.00 Coats By Using Roller/Brush To Wall Surfaces Over With And Including One Coat Of Interior Acrylic Emulsion Primer @ 10.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Interior Acrylic Emulsion By Using The Brands Of Interior Acrylic Emulsion Paint And Interior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 42 M&L For Preparing Existing Treated Surfaces Of Ceiling Including Cornices And Applying Two Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And As Directed By Engineer-In-Charge. 43 Material And Labour For Preparation Of New Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 44 Material & Labour For Applying Two Or More Coats Of 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Interior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives @ 1.43 Litre/ 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/ 10 Sqm Including A Coat Of Exterior Wall Primer @ 11 Sq.M/Litre/1 Coat As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed. 45 Material And Labour For Preparation Of Old Surfaces And Applying 02 Coats Of Exterior Acrylic Emulsion Paint ( Shade As Approved By Ge) With Highlighter Of Any Approved Shade, @ 5.00 Sq.M / Litre / 2.00 Coats By Using Roller To External Walls / Rcc Surfaces / Soffits Of Chajjas / Roof Projections / Cantilevers / Balcony Etc. Surfaces Over With And Including One Coat Of Exterior Acrylic Emulsion Primer @ 11.00 Sq.M / Litre / 1.00 Coat As Recommended For Under Coat By Manufacturer Of Exterior Acrylic Emulsion By Using The Brands Of Exterior Acrylic Emulsion Paint And Exterior Acrylic Emulsion Primer As Descriped In List Of Makes/Manufacturers Under Appendix B Here-In-After Complete All As Specified And Directed By Engineer-In- Charge. 46 Material And Labour For Complete Removal Of Existing Treatment Of Any Type / Description From Wall / Rcc Surfaces / Ceiling / Chajjas / Roof Projections Etc With Mechanical Means / Grinder And Applying One Coat Of Exterior Emulsion Paint (Light Shade) With Highlighter Of Any Approved Shade @ 5 Sqm/Litre/2 Coats By Using Roller To External Walls / Rcc Surfaces/Soffits Of Chajjas / Roof Projections /Cantilevers/ Balcony Etc Surfaces Over & Including A Coat Of Exterior Wall Primer @ 11 Sqm/Litre/1 Coat Over Acrylic Thick Wall Care Putty On External Surfaces Of Walls / Ceiling / Soffits (Thickness Vary From 1.5 To 2.5Mm As Required For Desired Smoothness And Levelling Of Surfaces In Two Or More Layers) By Using Ready Made Wall Care Putty Including Sand Papering After Filling The Putty To Make Surface Smooth And Ready For Receiving Painting Etc As Recommended For Under Coat By Manufacturer Of Exterior Emulsion By Using Following Brands Of Emulsion And Primer Complete All As Specified And Directed.Note For Item No 5 To 8 :- (A) The Prepared Surface After Wall Putty, The Contractor Will Inform To The Ge As Well As To The Engineer-In-Charge For Site Inspection Before Applying Further Finishes. Please Note That The Further Finishes Work Will Start Only After Approval Of The Prepared Surface From The Ge As Well As To The Engineer-In-Charge Through Site Order. 47 Material And Labour For For Preparing New Plastered Surfaces Of Ceilings And Applying Three Coats Of White Wash By Making The Lime Slaked At Site And Shall Be Mixed And Stirred With About Five Liters Of Water For 1 Kg Of Unslaked Lime To Make A Thin Cream. This Shall Be Allowed To Stand For A Period Of 24 Hours And Shall Then Be Screened Through Clean Coarse Cloth. 1 Kg Of Gum Dissolved In Hot Water Shall Be Added To Every One Cubic Meter Of Lime Cream. About 1.3 Kg Of Sodium Chloride Dissolved In Hot Water Shall Also Be Added For Every 10 Kg Of Lime For Making The Coating Hard And Rub-Resistant. Small Quantity Of Ultramarine Blue (Upto 3 Gm Per Kg Of Lime) Shall Also Be Added To The Last Two Coats Of White Wash Solution And The Whole Solution Shall Be Stirred Thoroughly Before Use Complete All As Specified And Directed By Engineer-In- Charge. 48 Material And Labour For Applying Three Coats Of White Wash On Newly Plastered Or Unplastered Ceiling Surfaces Including Preparation Of Surfaces, Complete All As Specified And Directed 49 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frames) Area Not Exc 1.5 Sqm Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 50 Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Exc 1.5 Sqm But Not Exc 4 Sqm Each Each As Doors, Windows And Ventilators And Removal From Site Complete All As Specified And Directed. 51 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat Of Size 45Mm X 70 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 52 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Door Frame / Chowkhat With Double Rebate Of Size 65Mm X 125 Mm Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvant Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg /Cum And Screw Withdrawl Strength Of 2200 N (Face ) & 1100 N (Edge) Minimum Compressive Strength Of 58 N /Sqmm Modulus Of Elasticity 900 N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retaident And Fixed In Position With And Including Ms Hold Fast Lugs / Ss Dash Fastner Of Required Dia And Length With And Including Supply And Fixing (03 Nos Per Frame ) 100 Mm Long Ss Butt Hinges Complete All As Specified And As Directed By Engineer-In- Charge. 53 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Plain Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 54 Supply & Fixing Factory Made Single Extruded Wpc ( Wood Polymer Composite ) Solid Decorative Flush Door Shutter Of 30 Mm Thick , Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade ), Calcium Carbonate And Nautral Fibers ( Wood Powder / Rice Husk / Wheat Husk ) And Non Toxic Additives (Maximum Toxcity Index Of 12 For 100 Gms ) Having Minimum Density Of 650 Kg /Cum And Screw Withdrawl Strength Of 1800 N (Face ) & 900 N (Edge) Minimum Compressive Strength Of 50 N /Sqmm Modulus Of Elasticity 850N/Sqmm And Resisitence To Spread Of Flame Of Class A Category With Property Of Being Termite / Borer Proof , Water Moisture Proof And Fire Retardant And With And Including Supply & Fixing Of 02 Nos (Per Leaf) Ss 150Mm Long Tower Bolt, Supply & Fixing Of 02 Nos (Per Door) Ss 300Mm Long Sliding Bolt With And Including Supply & Fixing Of 02 Nos (Per Leaf) Stainless Steel 150Mm Long Handle Complete All Specified And Directed By Engineer -In-Charge. 55 Supply & Fixing Factory Made 30Mm Thick Solid Wpc ( Wood Polymer Composite ) Wiremesh Door Shutter Of Required Size Comprising Of Virgin Pvc Resin Of K Value 57-60 ( Suspension Rade ), Calcium Carbonate And Natural Fibers ( Wood Powders/ Rice Husk/ Wheat Husk ) And Non Toxic Additives, Made From Extrusion Process Wpc Foam Sheet Single Extruded ( Inner ) With Having Minimum Density Not Less Than 650 Kg/Cum , Having Good Screw Holding Capacity ( Screw Withdrawal Strength Of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Of 50 N/Mm2, Modulus Of Elasticity 850N/Mm2 And Resistance Of Spread Of Flame Of Class A Category With Property Of Being Termite/ Borer Free.Water/ Moisture Proof And Fire Retardant. Pvc Foil Of Minimum 14 Microns Thick Of Approved Design Pasted On Both Faces Of Shutter For Fixing Mosquito Mesh And Xtn Aluminium Mesh Together On Panel Area Of Door Except Stiles And Rails To Be Panelled With And Including Mesh With Self Tapping Round Headed Scresws At Required Distance, Screws And Edges Covered With Feathered Pvc Edge Beading All Around Of Mesh And Fixing Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws With And Including 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01 No. Of Helical Door Spring Of 300 Mm Length Complete All As Specified And As Directed By Engineer-In-Charge. Note: 1. Material Test Certificate Of All The Items And Authentication Should Be Compulsory Provided By The Manufacturing Company 2. The Rate Of 03 Nos Door Stainless Steel Butt Hings 100Mm Long With Stainlessd Steel Screws For Each , 02 Nos Stainless Steel Barrel Tower Bolts Of Extrude Section, 150Mm Long (Isi Marked), 2 Nos Stainles Steel Handles, 125 Mm Long, (Isi Marked) , 01No. Of Helical Door Spring Of 300 Mm Length Is Inclusive In This Item And Nothing Shall Be Paid Extra On This Item..3. The Rate Of Mosquito Mesh And Xtn Aluminium Mesh Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 56 Supply And Fixing Factory Made Upvc White Colour Casement (Openable) Window (Area Exceeding 1.00 Sqm But Not Exceeding 2.00 Sqm Each) Made Of Extruded Profiles With Wall Thickness Of 2.3Mm ( + – 0.2Mm). Window Profile With Hollow Section With Multi Chamber, Frame (60Mm X 58Mm), Sash (60Mm X 73Mm), T Profile (One Vertical Length In Between Two Shutters) (60Mm X 74Mm), Glazing Bead (35Mm X 20Mm) Will Be Mitered Cut And Fusion Welded At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc., Making Arrangement For Fixing Of Hardware. Epdm Gasket 1.2 +– 0.2Mm Thick, Galvanized Steel Frame (28Mm X 21.5Mm), Sash (31Mm X 27.5Mm). T Profile (27Mm X 17Mm) To Be Inserted In Required Profile, Frame Will Be Fixed To The Wall With 8 Mm X 100Mm Long Fasteners. Hardware: [Casement Handle Made Of Zinc Alloyed (White Powder Coated), But Hinges OfZinc Alloyed (White Powder Coated), Transmission Gear Made Of Mild Steel With Multi Point Locking System] And 5Mm Thick Glazing With Selected Quality Glass.(Note: The Unit Rate Quoted By Contractor Excludes Cost Of Glass And Includes All Other Connected Accessories. Net Opening Will Be Measured For Payment Purpose.) 57 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-1 Using 20 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 58 Material And Labour For 75 Mm Thick Pcc 1:3:6 , Type C-2 Using 40 Mm Graded Stone Aggregate As In Plinth Protection, Finishing The Surface Even And Smooth Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In- Charge. 59 Demolition And Breaking Up Drain Pipes (Salt Glazed Ware, Ac Or Reinforced Concrete)Of Any Dia Set In Cement Laid In Trenches Incl All Fittings & Accessorises Complete All As Specified And As Directed By Engineer-In- Charge. 60 Supply & Fixing For 4 Mm Thick, Sheet Glass Ordinary Quality And Glazing With Oil Putty In Square Not Exceeding 0.5 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 61 Supply & Fixing 4.0 Mm Thick Figured Glass Pin Head Type And Glazing With Oil Putty In Square N.Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed 62 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Not Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 63 Supply & Fixing 5.5 Mm Thick, Sheet Glass Ordinary Quality Exceeding 0.50 Sqm In Each Pane Complete All As Specified And As Directed By Engineer-In- Charge. 64 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles, Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accourdingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles , Aluminium Butt Hinges, Aluminium Handles , Aluminium Tower Bolts , Aluminium Peg Stays & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (V)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill . 65 Supply & Fixing Stainless Steel Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Stainless Steel Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 66 Supply & Fixing Galvanised Ms Wire Cloth 0.36 Mm Nominal Dia Of Wire And Average Width Of Aperture 1.4Mm And Fixed With Tinned Tacks To Galvanised Ms Wire Staple Complete All As Specified And As Directed By Engineer-In-Charge. 67 Material And Labour For Providing And Laying Premium (1St Quality) Straight Edge,Stain Free, Glooss Finish, Square Marbonite Double Charged Vitrified Tiles Size In 600Mm X 600Mm X 9Mm To 10Mm Thick As In Floors Etc. Shade As Approved By Ge , Set And Jointed With Using Spacer And Approved High Polymer Modified, Grey Cement-Based Tile Adhesive Suitable For Fixing Medium Format Tile/Stone In Walls/Floor Conforms To Is 15477 : 2019 Type 2T “Adhesives For Use With Ceramic, Mosaic And Stone Tiles” Conforms To En 12004: 2017 And Is A Normal Cementitious Adhesives (C1) With Slip Resistance (T) Of Class C1 And Necessary Grouting As Per Manufacturer’S Instruction, Completed All As Specified And Directed By Engineer-In-Charge. 68 Supply And Fixing Anodised Aluminium Snap Grid Frame Work For False Ceiling 605Mm X 605 Mm Etc Complete All As Specified And As Directed By Engineer-In-Charge. 69 Supply And Fixing False Ceiling At All Heights With Grg (Glass Fibre With Reinforced Gypsum) False Ceiling Tiles Of Size 595 X 595 Mm Of Approved Tecture Design And Patterns Having Moisture Content Less Than 2% Humidity Resistance Of 99%, Nrc 0.50 To 0.75 As Per Is 8225:1987, Noncombustible As Per Bs 476 (Part 4)- 1970 And Light Reflectance Of 85%D (Minimum) To Be Laid In True Horizontal Level Suspended On Inter Locking Metal T-Grid Of Hot Dipped Galvanisezed Iron Section Of 0.33Mm Thick (Galvanized @ 120 Grams Per Sqm Including Both Sides) Comprising Of Main T Runners Of Size 15 X 32 Mm Of Length 3000 Mm, Cross-T Of Size 15 X 32Mm Of Length 1200Mm And Secondary Intermediate Cross T Of Size 15 X 32 Mm Of Length 600Mm To Form Grid Module Of Size 600 X 600Mm, Suspended From Ceiling Using Galvanised Mild Steel Items (Galvanizing @ 80 Grams Per Sqm) I.E 50 Mm Long, 8 Mm Outer Diameter M-6 Dash Fasteners, 6Mm Dia Fully Threaded Hanger Rod Upto 1000 Mm Length And L Shape Level Adjuster Of Size 85 X 25 X 2Mm. Galvanized Iron Perimeter Wall Angle Of Size 24 X 24 X 0.40Mm Of Length 3000 Mm To Be Fixed On Periphery Wall I Partition With Help Of Plastic Rawl Plugs At 450 Tiles Fully Center To Center And 40Mm Long Dry Wall Wodd Screws. The Work Shall Be Carried Out As Per Specifications, Drawing And As Per Directions Of The Engineer-In-Charge. 70 Material And Labour Anodised Aluminium Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc. Omplete All As Specified And As Directed By Engineer-In-Charge. 71 Material And Labour For Providing And Fixing Aluminium Work With Polyester Powder Coated Aluminium ( Minimum Thickness Of Polyester Powder Coating 50 Micron For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/Appropriate Z Sections And Other Sections Of Approved Make Conformikng To Is:733 And Is :1285, Fixing With Dash Fasteners Of Required Dia And Size,Including Necessary Filling Up The Gaps At Junctions I.E At Top , Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth , Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Aluminium Cleat Angle, Aluminium Snap Beading For Glazing/ Paneling , C.P. Brass/ Stainless Steel Screws, All Complete All As Specified And Directed By Engineer-In-Charge .Note :- (I) Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Physically Ascertained Through A Board Of Officers Convened By Ge And Payment Shall Be Made Only After Ascertaining The Actual Weight Of Aluminium At Site.(Ii) The Rate Of Material And Labour For Providing The Epdm Rubber, Neoprene Gasket , C.P. Brass / Stainless Steel Screws Are Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) During Considering The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading , The Weight Of Epdm Rubber, Neoprene Gasket , C.P. Brass/ Stainless Steel Screws Shall Not Be Considered For Measurments And Payments. Only The Weight Of The Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading Shall Be Considered And Measurment And Payment Shall Be Made Accordingly.(Iv) During The Weight Of Aluminium Sections , Aluminium Cleat Angles & Aluminium Snap Beading ,The Weight Of Polyester Powder Coating 50 Micron Shall Not Be Considered For Weight But The Rate Of Material And Labour For Providing Polyester Powder Coating 50 Micron Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (V) Powder Coated Butt Hinges, Aluminium Handles, Aluminium Tower Bolts & Aluminium Peg Stays Shall Be Measured And Paid Seperately Under Respective Itmes Of ScheduleA Boq.(V) Glazing /Paneling And Wire Mesh Shall Be Measured And Paid Seperately. (Vi)The Board Shall Be Duly Countersigned By Ge Shall Enclosed With Final Bill 72 Material And Labour Anodised Aluminium Grill (Anodised Transparent Of Dyed To Required Shade According To Is: 1868 With Minimum Anodic Coating Of Grade Ac 15) Of Approved Design/Pattern, With Approved Standard Section And Fixed To The Existing Window Frame With C.P. Brass/Stainless Steel Screws @ 200 Mm Centre To Centre, Including Cutting The Grill To Proper Opening Size For Fixing And Operation Of Handles And Fixing Approved Anodised Aluminium Standard Section Around The Opening, All Complete As Per Requirement And Direction Of Engineer-In-Charge. 73 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 15Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 74 Taking Up Or Down Galvanised Steel Water Tubing (Gi Pipe) 20Mm Bore Including Fitting/Connection From Wall/Ceiling/Floor/Concealed Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 75 Supply And Fixing 16 Mm Bore Cpvc Pipe Sdr 11 With And Including Cpvc Sdr 11 Fittings And Fixed To Walls & Ceilings Or Laid In Floors, Complete Complete All As Specified And As Directed By Engineer-In-Charge 76 Supply And Fixing 20 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 77 Supply And Fixing 25 Mm Bore Cpvc Pipe Sdr 11And Plain Cpvc Sdr 11 Fitting With All Fitting And Fixed To Walls & Ceilings Or Laid In Floors, Including Taking Down Unservicable Existing Gi Tubing Of 20Mm Bore And Fittings Complete Complete All As Specified And As Directed By Engineer-In-Charge. 78 Material And Labour For Cutting Chases In Brick Wall , Pinning In. Making Good To Facings Where Required And Pointing In Cement Mortar 1:3 Or Pcc 1:2:4 To Ends Or Edges Of Landings, Steps, Cills, Sunshades, Shelves, Lintels, Etc.; And Cutting Chases For Concealed Water Tubing Or Concealed Conduit Wiring, Etc., And Making Good, Cutting Exc 10 Cm But Not Exc 20 Cm Girth Complete All As Specified And As Directed By Engineer-In- Charge.. 79 Supply And Fixing In Repair Brass Chromium Plated Wall Mixer For Mixing Hot & Cold Water Screwed Down, Screwed For 15Mm Bore Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 80 Supply And Fixing In Repair Bib Taps Cost Copper Alloy With Crutch Or Butterfly Handle , Screwed Down , Chromium Plated Screwed For Iron Pipe Or Brass Ferrul For 15Mm Bore Dia Pipe Complete All As Specified And Director. 81 Supply And Fixing In Reapir 15Mm Bore Bib Tap, Long Body, Fancy Type, Chromium Plated, Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule Complete All As Specified And As Directed By Engineer-In-Charge. 82 Supply And Fixing In Repair 15Mm Bore Stop Valves, Fancy Type, Chromium Plated With Long Shank And Cup (Concealed Type) Cast Copper Alloy, Screwed Down, High Pressure, With Crutch Or Butterfly Handle, Screwed Both Ends For Iron Pipe Or For Unions And Fixed For Iron Pipe Or For Brass Ferrule Complete All As Specified & Directed By Engineer-In-Charge. 83 Supply And Fixing In Repair Angular Stop Cock With Wall Flange, Fency Type Chromium Plated Cast Copper Alloy Screwed Down, High Pressure, Screwed One Ends For 15Mm Bore Of Iron Pipe Or For Union And Fixed In Position Complete All As Specified & Directed By Engineer-In-Charge. 84 Supply And Fixing In Repair Vitreous China Wash Hand Basin, White, Flat Back, Size 450Mm X 300 Mm Including Cast Iron Cantilever Bracket With And Including 32 Mm Dia Brass Waste Coupling And With And Including Fixing Of Waste Fitting And Union Complete All As Specified And As Directed By Engineer-In-Charge. 85 Supply And Fixing In Repair Ptmt Mirror Cabinet Of Size 380Mm X 450Mm Best Quality Confirming Ot Sample Kept In GeS Office Complete All As Specified And Directed By Engineer-In-Charge. 86 Supply And Fixing In Replacement Sink With Drainage Board Made Of Stainless Steel 1 Mm Thick Kitchen Or Laboratory With Plugs, Washers And Wastes; Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cantilever Brackets And Connecting Union To Pipe Overall Size 915Mm X460Mm Bowl Size 410Mm X330Mm X160Mm Complete All As Specified And As Directed By Engineer-In-Charge. 87 Supply & Fixing In Replacement Brass Cp Mixer For Mixing Hot & Cold Water Screwed Down For Iron Pipe And Fixed For Iron Pipe 15Mm Bore Complete All As Specified And As Directed By Engineer-In-Charge. 88 Supply And Fixing In Repair Stainless Steel Plate Rack Of Size 900Mm X 600Mm X 250Mm And Thickness Of Stainless Steel Strip Of 1Mm Fixed On Wall Etc. Complete All As Specified And Directed . 89 Material And Labour For Cutting Holes In Brick Walls Built In Cement Mortar (Not Exceeding Half Brick) For Inserting Hold Fast And Making Good Dismantled Portion In Cm 1:3 Or Cement Concrete 1 : 2 : 4 , Type B1 As Required , Depth Of Embedded Portion Exceeding Half Brick Walls And Not Exceeding One Brick Of Hold Fast Or Lugs Measured From The Face Of The Jamb Into Walls Complete All As Specified And As Directed By Engineer-In- Charge. 90 Material And Labour For In Repair Vitreous China Wash Down Water Closet Pan Wall Hanging Single Piece (With And Including Flushing Cistern Ewc) P Trap, With And Including White Coloured Closed Pattern Plastic Seat Cover, Hand Faucet , With And Including Mild Steel Chromium Plated Or Aluminised Hinging Device Complete All As Specified And As Directed By Engineer-In- Charge. 91 S & F In Repairs Cp Stainless Steel Grating (With Or Without Waste Hole), 125Mm Size, Fixed On Floor/Nahani Gully Trap Traps Etc Complete All As Specified And Directed. 92 S&F In Repair 25Mm Dia And 1Mm Thick Stainless Steel Drapery Rod Including With Bracket / Wall And Other Side Fancy Knobs At Both Ends As Approved By Engineer-In-Charge/Ge Including Taking Down Old Existing Rod/Pelmet With Accessories Complete All As Specified. 93 Supply And Fixing Cp Brass Fancy Type Corner Glass Shelf (25Cm/30Cm ) With Cp Brass Bracket & Railing Etc. Complete All As Specified And As Directed By Engineer-In- Charge. 94 Supply And Fixing In Repair Stainless Steel, Chromium Plated, Decorative Type, Soap Dish Holder Of Approximate Size 160Mm X 160Mm X 90 Mm Fixed To Wall With Rubber Plugs Complete All As Specified And As Directed By Engineer-In-Charge. 95 Supply & Fixing In Replacement Brass Chromium Plated Tubular Towel Rail 20Mm Dia D Type, 600Mm Long Between Flanges Fixed To Plug , Bracket With Chromium Plated Brass Screws Complete All As Specified And Directed By Engineer-In-Charge. 96 Supply And Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Pipes Single Socket 6 Kg/Sq Cm In Any Length With Stack Clamps Made Out Of 50Mm By 5 Mm Flat Iron And 16Mm Dia Round Iron Stays, Including Bolts And Nuts And Securing Ends Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge. Including Taking Down Old Ac Eaves Gutters And Rainwater Pipes ( Of Any Size And Pattern), Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 97 Supply & Fixing 110 Mm Bore Of Pipe Pvc (Swr) Type B Ring Fit Pipes Single Socket In Any Length With Stack Clamps As Shown In Btd Drg No. 916 Sheet 1/4 To 4/4 And Btd-917 Sheet Sheet 1/1 Of Stays To Wall At A Distance Of 100-120Mm Away From Walls Complete All As Specified And As Directed By Engineer-In- Charge Including Taking Down Old Ac Eaves Gutters And Rain Water Pipes ( Of Any Size And Pattern) Including All Fittings, Compete All As Specified And As Directed By Engineer - In-Charge. 98 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 100 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 99 Dismantling And Disconnecting Of Existing Ci Soil Vent Pipe 75 Mm Bore Fixed To Wall,Laid In Trenches Incl All Fittings & Accessories Complete All As Specified And Directed. 100 Supply And Fixing 110 Mm Bore, Pvc (Swr) Fittings Type -B Such As Bends, Tee, Shoe Etc; Fixed To Pvc Pipes, Compete All As Specified And As Directed By Engineer - In-Charge. 101 Supply & Fixing 110Mm Bore Pvc (Swr) Pipes Single Socketed In Any Length With Rubber Ring Joints Laid In Trenches Or In Floors Complete All As Specified And As Directed By Engineer-In- Charge. 102 S&F 110 Mm Bore Of Pvc (Swr) Bends And Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 103 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Single Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 104 S&F 75 Mm Bore Of Pipe Pvc (Swr) Pipes Type - B Double Socket In Any Length With Rubber Ring Joint Fixed To Walls With Ms Clamps Of F1 25X2Mm Complete All As Specified And Directe 105 S&F 75 Mm Bore Of Pvc (Swr) Bends & Tee, Type - B Of Any Radius / Shoe With Access Door Fixed To Pvc Pipes Complete All As Specified And Directed. 106 S&F In Repairs Pvc (Swr) Gully Trap Of Size 150 X 150 Mm, Square Or Round Mouthed, Type P Setting And Jointing With Solvent Cement Complete All As Specified And Directed. 107 Supply And Fixing In Repair Pvc (Swr) Type -B Floor Trap Any Type (Q, S, P), 110/75Mm Dia With Grating Including Jointing To Waste Pipe Fixed In Cement Concrete (1:2:4) Type B-1 Using 20Mm Graded Stone Aggregate Complete All As Specified And Directed By Engineer-In- Charge. 108 Supply And Fixing In Replacement 10 Litres Capacity Pvc Valveless Syphonic Action Type Low Level Flushing Cistern White With Inlet, Ball Valve, Float, Handle Including Brackets And 32Mm Dia Pvc Flush Pipe Complete All As Specified And Directed By Engineer-In-Charge. 109 S&F In Repair Vitreous China Wash Basin, White, Oval Type , Size 450 Mm X 300 Mm Fixed On And Including Cast Iron Cantilever Bracket, 32 Mm Dia Brass Waste Coupling And Including Fixing Of Tap, Waste Fitting And Union Complete All As Specified And Directed. 110 Supply & Fixing In Repair Chromium Plated Square Shower Rose 200Mm X 200Mm Size, With Or Without Swivel Joints, Any Size, Including Fixing To Steel Pipe Or Union For 15Mm Bore Of Pipe Complete All As Specified And As Directed By Engineer-In-Charge. 111 Supply & Fixing In Repair Pvc Connections 15Mm Size With Brass Nuts Of Length 450Mm Complete All As Specified And As Directed By Engineer-In-Charge. 112 Supply & Fixing In Repair Pvc Waste Pipe With Socket Suitable For Connection To Waste Fittings Of 32/40Mm Dia, And Of Length Minimum 75 Cm Complete All As Specified And As Directed By Engineer-In-Charge. 113 Supply And Fixing In Replacement Three Layers 500 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 114 Supply And Fixing In Replacement Three Layers 1000 Litre Hdpe Water Storage Tanks Polyproof. White In Colour Rotational Moulded Polyethylene (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Position Including Supply And Fixing Of Suitable Size Inlet/Outlet Arrangement & Other Accessories Complete All As Specified And As Directed By Engineer-In-Charge. 115 Supply And Fixing In Repair Ball Valve High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Of Size 20 Mm Bore (Minimum Weight 20Mm-210 Gram) Complete All As Specified And As Directed By Engineer-In- Charge. 116 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 20Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 117 Supply & Fixing In Repair Gun Metal, Globe Or Gate Valve (Isi Marked), Brass Cast Copper Alloy, With Iron Wheel Head, Screwed Both Ends Suitable For 25Mm Bore Iron Pipes Complete All As Specified And As Directed By Engineer-In-Charge. 118 Supply And Fixing In Replacement Bevelled Edge Mirror Selected Quality 5Mm Thick Glass Mounted And Fixed To With Chromium Plated Brass Screws And Cup Washers, With And Including Pvc Frame Around Made Of Pvc Channel, Complete All As Specified And Directed By Engineer-In-Charge. 119 Supply And Fixing In Repairs Sheet Glass Shelf Assembly Consisting Of 5.5Mm Thick Sheet Glass Shelf 12Cm Wide With Chromium Plated Bracket Guard And Railing 60Cm Long Complete All As Specified And As Directed By Engineer-In- Charge. 120 Roughening Surfaces Of Old Concrete Floor By Picking, Sweeping Clean And Washing Down With Water To Remove Dust, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 121 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing), Removing Serviceable Tiles To Store And Rubbish Off The Permises Etc. Complete All As Specified And Directed By Engineer-In-Charge. 122 M&L For Pcc (1:2:4) Type B-1, Using 20 Mm Graded Stone Aggregate As In Floor Surface Finished Fair 30 Mm Thick Below Tiles Complete All As Specified And Directed. . 123 M & L Non-Skid Coloured Ceramic Tiles 7 To 8 Mm Thick (Square/ Rectangular) Area Of Each Tile Exceeding 0.11 Sqm But Not Exceeding 0.18 Sqm, In Floors Etc. Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match Over & Including 15Mm Thick Screed In Cm 1:6 Complete All As Specified And Directed. 124 Material And Labour 25Mm Thick Cement Concrete Type B-1, 1:2:4 (12.5 Mm Graded Stone Aggregate) As Floors, Sub-Floors Etc And Finishing Surfaces Of Concrete Topping As Even & Fair Or Even & Rough To Receive The Topping Layer Complete All As Specified And Directed By Engineer-In-Charge. 125 Material And Labour For Double Charge Vitrified Ceramic Tiles ,Stain Free, Having Size Not Less Than 600X300Mm And 8 Mm Thick, Premium (1St Quality) Straight Edge, Colour As Approved By Ge , As In Vertical Surfaces Such As Skirting , Set And Jointed In Neat Cement Slurry And Laid Over And Including 10 Mm Thick Rendering In Cement Mortar 1:4 Complete All As Specified And As Directed By Engineer-In- Charge. 126 Material And Labour Granite (Of Any Type) Work (Table Rubbed And Polished) As In Steps, Pillars,Win Dow-Cills, Cooking Platforms And Like In Laid Over And Including 15 Mm Thick Screed In Cement Mortar (1:4) And Pointing In White Cement (1:2) Using Marble Dust With Admixture Of Pigment To Match With Marble Shade And Roundening To The Edge Of Stone Slabs On Edges Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 127 Dismantling Stone Slabs And Tiles Of Any Description Or Thickness In Floors, Aprons Etc Laid Dry Or Bedded And Pointed In Any Mortar Complete All As Specified And As Directed By Engineer-In-Charge. 128 Demolition Of Cement Concrete Reinforced Of Any Discription And In Any Position, Including Reinforcement Cut As Required To Facilitate And Including Removing Rubbish Material From Building And Thrown In Low Lying Empty Area (As Per Direcction Of Age/Je) At Any Distance Upto 500 Metres From The Site Complete All As Specified And As Directed By Engineer-In-Charge. Note:The Weight Of Scrap Iron For Schedule Of Credit Shall Be Ascertain By Boo As Ordered By Ge.The Copy Of Boo Duly Countersinged By Ge Shall Be Enclosed With Final Bill. 129 Material And Labour For Reinforced Cement Concrete, Nominal Mix,1:2:4, Type-B1, Using 20 Mm Graded Stone Aggregate As In Slabs Supported On Walls, Beams And Columns In Floors, Roofs, Landings, Balconies, Canopies, Deck Slabs And In Shelves And The Like Including Proper Compaction By Using Mechanical Viberator Complete All As Specified And Directed. Note : Reinforcement And Form Work Shall Be Measured And Paid For Separately Under Appropriate Item Of This Schedule. 130 Supply And Fixing Pvc (Hdpe) Swr, 110 Mm Bore, Single Socketed In Any Length With Rubber Ring Joints Using Solvent As Per Manufacture Instruction, Fixed To Walls Complete All As Specified Including Fixing Of Pipe To Wall With Flat Irons Clamps Of Size 25 X 3 Mm, Bolts, Washers, Nuts, Nails Etc, After Taking Down Existing Damaged Rain Water Pipe Complete All As Specified And Directed 131 Material & Labour For In Repair 75 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 132 Material & Labour For 100 Mm Dia Pvc (Swr) Floor Trap Type B , Plain With Grating Including Jointing With Solvent Complete All As Specified And Directed By Engineer-In-Charge. 133 Material And Labour For Water Proofing Tratment To Roof / Terrace (Material Of Water Proof Treatment As Approved By Ge) Single Component, Acrylic Based, Flexible, Micro Fibre Reinforced Waterproofing And Heat Reflective Coating System. The Treatment Shall Be Carried Out As Per The Manufacturers Instructions And Shall Include The Followings:(A) Preparation Of Substrate And Cleaning It Off All Loose And Triable By Mechanical Means(B) Open The Cracks Lines To Form , V Grooves With Cutter/Hammer/Chisel Up To 5-10Mm And Filling With Crack Filler And Pu Sealant.(C) Application Of Primer Coat @ 0.2 To 0.3 Kg/ Sqm Followed By The First Coat @ 0.75Kg/ Sqm.(D) The Second Coat Shall Be Applied @ 0.75 Kg / Sqm And Reinforced With Fabric Re-Inforcement Between The First And Second Coat.(E) The Top Coat Of Primer Shall Be Applied After The Second Coat Dries Off @ 0.05-0.08 Kg Per Sqm.(F) The Material Shall Adhere To Following Specification. Technical Specification Of Materialtensile Strength 1.5 Mpa Astm D412Elongation At Break > 200% Astm D412Adhesion In Peel > 1.5 Mpa (On Concrete Substrate) En 1542Crack Bridging Ability Passes Upto 3.2Mm Width Astm C1305Permeability To Water Vapour Passes Is 2645Water Vapour Transimission ~ 23 G/M²/24Hr Astm E96Water Absorption 134 Material And Labour For 40Mm Average Thick Pcc Padding In 1:2:4 Type B-1 (Using 20Mm Graded Stone Aggregates) As In Roof Slab Finishing The Surface Even And Fair Using Liquid Water Proofing Compound Complete All As Specified And Directed. Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 135 Material And Labour For Making Benching With Pcc 1:2:4 Type- B0, Using 12.5Mm Graded Stone Aggregates Using With Liquid Water Proof Compound As Per ManufacturerS Instruction Along Side Wall Adjoining To Roof In Concave Shape Complete All As Specified And Directed. Note : Liquid Water Proofing Compound Shall Be Measured And Paid Separetly As Supply Only Under Appropriate Item Of Schedule A Boq. 136 Material And Labour For Cement Concrete 1:2:4 , Type B-2 Using 40 Mm Graded Stone Aggregate As In Foundation Filling And Mass Concrete Complete All As Specified And As Directed By Engineer-In-Charge. 137 Material And Labour For Water Proofing Compound Complete All As Specified And Directed. 138 Supply And Laying Dwcpe (Sn 8) Drain Pipes 150 Mm Nominal Dia As Per Is-16098 (Part-Ii), Laid In Trenches On Bed Including All Accessories/ Fittings/ Jointed Ring, Jointing And Testing Complete All As Specified And As Directed By Engineer-In- Charge.Note:- Excavation , Earth Work, Bedding And Pedestal / Anchorage If Required Shall Be Measured And Paid Separately Under Appropriate Item Of Boq/ Sch A 139 Material And Labour For Pcc (1:3:6) Type C-2 Using 40 Mm Graded Stone Aggregates As In Concrete Bed Of Sgsw Drain Pipes Of 150 Mm Bore, Laid To Required Slope Including Packing Under And Haunching Against The Sides Of Pipes After They Are Laid And Tested Complete All As Specified And As Directed By Engineer-In-Charge. Note :- (I) Thickness Of Concrete Bed Below The Barrel Of Pipe Shall Be 10 Cm. (Ii) Width Of Concrete Bed Shall Be Outer Diameter Of Drain Pipes (Not Of Sockets / Collar) Plus 30Cm. 140 Material & Labour For Antitermite Treatment Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc. In Apron/Plinth Etc., Complete All As Specified And As Directed By The Engineer-In-Charge. 141 Material And Labour For Att At Points Of Contact Of Wood Work By Chemical Emulsion (In Oil Or Kerosene Based Solution) @ 0.5 Litre/Hole By Drilling 6Mm Dia Holes At A Downward Angle Of 45 Degree At 150Mm Centre To Centre And Sealing The Same Complete All Sepecified And Directed By Engineer-In-Charge. 142 Material And Labour For Att Of Soil Under Existing Floors Using Emulsion @ One Liter Per Hole, 300Mm Apart Including Drilling And Plugging 12Mm Dia Holes With Cement Mortar 1:2 (1 Cement :2 Coarse Sand) To Match The Existing Floors Complete All Sepecified And Directed By Engineer-In-Charge. 143 Material And Labour For Writing Letters Or Figures (Block,Roman, Italic Ot Indian) Of Any Description, Not Exceeding 30Cm High With Paint Complete All Sepecified And Directed By Engineer-In-Charge. 144 Material And Labour For Cutting Into Existing Manholes For Connecting New Drains, Making Good To Pipe And Rendering, Cutting Out Existing Benching For And Forming Branch Channel (1/2 Round Or 3/4 Section) In Cement Concrete 1:2:4 Type B-L Smooth Finished, And Reforming Benching As Required For Internal Dia Of Pipe In 150 Mm Complete All As Specified And As Directed By Engineer-In-Charge. 145 Taking Down Cement Or Cement Lime Plaster On Brick Or Stone Walls, Etc. Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water, Etc. Complete All As Specified And As Directed By Engineer-In-Charge. 146 Material And Labour For 15Mm Thick Rendering In Cm (1:6) (Internal Surface) On Other Than Fair Faces Of Brick Work Or Concrete Surfaces And Finishing Even & Smooth But Without Using Extra Cement Complete All As Specified And As Directed By Engineer-In-Charge. 147 Material And Labour For Factory Made,Machine Pressed Precast Interlocking Paver Block 60 Mm Thick With Grey Cement And No Pigment, Any Shape And Size, Conforming To Is 15658-2006, Made Out Of M-35 Grade Concrete Laid Over Sand Cushioning Complete All As Specified And As Directed By Engineer-In- Charge. Note: The R Sand Cushioning Shall Be Measured And Paid Seperately Under Appropriate Item Of Schedule A Boq. 148 Dismantling Of Brick Tiles Or Terracing Tiles Single Layer On Roof & Disposal Of Retrieved Material Upto A Distance N.Exc 100M Where Directed, Complete All As Specified And Directed By Engineer-In- Charge. 149 Demolition Of Mud In Roofs, Any Thickness, Including Plastering And Leeping (Whether Full Thickness Removed Or Only A Part Thereof Disposal Off Rubbish Upto A Distance Not Exceedomg 500.00Mtr Where Directed ) Complete All As Specified And Directed By Engineer-In- Charge. 150 Material And Labour For 15Mm Thick Screed Bed Or Bedding Layear In Cement Mortar 1:4 On Roof Surfaces, Parapet Or Vertical Beam Surface (Horizontal Or Vertical) Finishing The Surfaces Even And Fair Complete All As Specified And Directed By Engineer-In-Charge. 151 Supply And Fixing Anodised Aluminium Handle, Fabricated Type 150Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 152 Supply And Fixing Aluminium Anodised Barrel Tower Bolt Of Extruded Section, 200Mm Long Complete All As Specified & Directed By Engineer-In-Charge. 153 Supply & Fixing Aluminium Anodised Sliding Door Bolts 300Mm Long, With Hasp And Staple (Bolt Type) And Fixing Clips Of Sheet, Cast Or Extruded Sections And Fixing Bolts And Sliding Bolts Of Extruded Sections Or Cast-Aluminium Alloy And Fixed Complete All As Specified & Directed By Engineer-In- Charge. 154 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer Without Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 155 Supply & Fixing Factory Made Steel Window Confirming To Is 1038 With Side Hung Shutters Including Projecting Type Hinges, With Steel Handle, Steel Peg Stay, Complete, Dovetailed Welded, With And Including One Shop Coat Of Zinc Chromate Primer With Glazing Bars Including Making Good As Per Existing Surfaces Complete All As Specified & As Directed By Engineer-In- Charge.Note: The Rate Of One Shop Coat Of Zinc Chromate Primer Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 156 Supply Only 3.00 Mm Thick Sheet Glass Ordinary Quality ,Fixing With Oil Putty To Wooden Or Steel Surface N.Exc 0.5 Sqm Each Complete All As Specified And Directed 157 Material & Labour For Excavating In Post Holes (Or Similar Holes) Each N Exc 0.5 Cu. M, Getting Out, Returning, Filling In And Ramming Earth Or Broken Rubble Mixed With Earth Around, In Layers Not Exceeding 25 Cm, In Soft / Loose Soil Complete All As Specified And Directed By Engineer-In- Charge. Complete All As Specified And Directed By Engr-In-Charge. 158 Supply And Fixing For Mild Steel Screw Bolts 5Mm To 10Mm Dia Of Neck (Machine Made) With Hexagonal Or Square Heads At One End And Screwed The Other, Or Screwed Both Ends, Each Screwed End To Be Fitted With Washers And One Hexagonal Or Square Nut, Length Of Bolt Exc 5Cm But N Exc 10Cm Long Complete All As Specified And Directed By Engr-In-Charge. 159 Supply And Fixing For Pre -Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50Mm Thickness Of Any Colour Having Atensile Strength Of 550 Mpa As In Roof Covering Fixed With L Type Or J Type Or Cranked Hook Bolts All As Specified And Directed By Engineer-In-Charge. 160 Material And Labour For Roof Trusses (Framed), Trussed, Purlins, Crane Gantries, Rails And Fastenings And Heavy Bracket Framing (Beam, Tee, Angle, Channel Or Flat Sections) Including Distance Pieces, Cleats Etc Complete All As Specified And Directed By Engr-In-Charge. 161 Material And Labour For Steel Work In Tubular Post 100Mm Dia Including Special Shaped Washer Etc. Complete Using Erw Or Induction Butt Welded Tubes Conforming To I. S.1161- 1979 Grade St.-240 Including Rolled Mild Steel Joist, Channel, Angle, Or Tee Sections, Fixed Independently, Without Connecting Plates, Etc. (Cut To Ordinary Lengths I.E. Within 20Mm Of The Length Indicated Of Gde Fe 410 -S, Complete All As Specified And Directed By Engr-In-Charge. 162 Supply And Fixing In Repairs Magic Eye For Flush/Panelled Door Shutter Etc Complete All As Specified And As Directed By Engineer-In-Charge. 163 Supply And Fixing Framed Work As In Doors Or Gates Of Angle Or Other Section With Gusset Plates, Rails, Braces, Etc., Complete, Drilled For Fixing Of Steel Sheeting Or Other Covering. Doors, Etc. To Be Prepared For Hanging Or Sliding With And Including Either Hooks And Hinges Or Steel Hanging Door Fittings (Exclusive Of Steel Sheeting Or Other Covering, Running Rails And Guides) Andhanging; Also Fastening And Fixing Complete Complete All As Specified And Directed By Engineer-In -Charge. 164 Material And Labour For Preparation Of New Steel Surfaces Of Any Description Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over With And Including One Coat Of Red Oxide Zinc Chrome Primer Complete All As Specified And As Directed By Engineer-In-Charge. 165 Material And Labour For Preparing Old Steel Surfaces Of Any Description Over 10 Cm Width Or Girth And Applying One Coat Of Synthetic Enamel Paint Complete All As Specified And As Directed By Engineer-In- Charge. 166 Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And As Directed By Engineer-In- Charge. 167 Supply & Fixing 18Mm Thick Hdhmr Board Uv Coating, Exterior Grade As Approved By Ge, With And Including Acrylic High Gloss Sheet Of Min 1Mm Thick Over Hdhmr Board, Anti Fungal, Moisture Resistance, Anti Borer, As Per Is 14587 For Frame And Shutter For Kitchen Cabinets / Cupboards (Such As Side Wall, Shutter, Partition Back Side Of Etc. Of Cupboard And Cabinets). Complete All As Specified And Directed By Engg-In-Charge. 168 Supply & Fixing In Repairs Of Stainless Steel Cabinet / Drawers Handle Having A Length Of 250Mm And Shape Complete All As Specified And Directed. 169 Supply & Fixing In Repairs Of Partial Overlay / Fully Overlay Hydraulic Self Closing Concealed Hinges Having Size 103Mm X 64Mm Finish Of Nickel/Silver As Approved By Ge Complete All As Specified And Directed By Engg-In-Charge. 170 M&L For 40Mm Gi Pipe Medium Grade Made To Shape As In Spout Pipe As In Sunken /Verandah/ Balconey Complete All As Specified And As Directed. 171 Supply And Laying Or Fixing Or Laid In Trenches/ Ducts/ Through Pipes/ In Floors / Under Roads/ Hard Standing /Along Poles And Testing Lt Cable Xlpe, Pvc Insulated Screened, Bedded, Galvanised Steel Strip Or Wire Armourd Cable (Heavy Duty) 1100 Volt Grade With Aluminium Conductor Having Cross Sectional Area 70 Sqmm X 3.50 Core Conforming To Is-7098 (Part-I -1988) Complete All As Specified And As Directed By Engineer-In-Charge. (Excavation And Earth Work, Sand Cushioning & Gi Pipe Shall Be Measured And Paid For Separately) 172 Taking Down Carefully Copper /Aluminium Point Wiring (Light, Fan, Socket Or Power Point ) Complete Including Fitting Such As Hylem , Sheet Switches, Ceiling Rose, Pendent Holder , Sockets, Fan Regulator , Bell Push, Electronic Bell , Sunken Box Except Concealed Conduit Etc. Complete All As Specified And Directed By Engineer-In-Charge. Notes:(I) The Weight Of Aluminium Scrap , Copper Scrap And Iron Scrap Shall Be Ascertained By Boo As Ordered By Ge And Same Duly Countersinged By Ge Shall Be Enclosed With Final Bill. (Ii) The Rate Of Cutting Chases (As Required) And Making Good Surfaces To Match With Adjoining Surface Shall Be Measured And Paid Seperately Under Serial Item No. 173.00, 174.00, 175.00, 176.00, 177.00, 178.00, 179.00, 180.00, 181.00, 182.00, 183.00, & 184.00 Of Boq. 173 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps One Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 174 Material And Labour Point Wiring For One Light / Fan Point Controlled By 6 Amps Two Way Modular Switch Switch With 2.5 Sqmm Pvc Insulated, Unsheathed Multi Strand Copper Conductor Cable Fr-Lsh In And Including Concealed Pvc Conduit 20 Mm Dia Heavy Duty Isi Marked, Steel Terminal Sunken Boxes And 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point, Controlled By One Switch On The Same Board With Other Switch Or Independent Including Cutting, Chasing The Surface And Then Making Good The Same In Cm (1:3) Complete All As Specified And Directed By Engineer-In-Charge. (Note:- Switches, Sockets Etc Shall Be Measured And Paid For Separately Under Items Of Schedule). 175 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Same Board Complete All As Specified And As Directed By Engineer-In- Charge. 176 All As Per Item No 17400 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 6 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 177 All As Per Item No 174.00 Here- In -Before But For One 3/5 Pin, Modular Socket Outlet 5/15 Amp, On Independent Board Complete All As Specified And As Directed By Engineer-In- Charge. 178 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Bell/Buzzer Point Controlled By One Push Button On Independent Board But Not Below The Switch Board, Complete All As Specified And Directed By Engineer-In-Charge. 179 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For Modular Socket Outlet 3 Pin 6 Amp On Independent Board Complete All As Specified And Directed By Engineer-In-Charge. 180 All As Per Serial Item No 174.00 Of Boq Here-In-Before But For 15/16 Amp Socket Out Let By Using 2.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 181 Material And Labour For Point Wiring For One Light / Fan Point Controlled By One Switch With 1.5 Sqmm (Nominal Area) Pvc Insulated Unshealthed Multi Stranded Copper Conductor Cable Fr-Lsh In Existing Conduit And Provision Sunken Boxes But Inclyding 3 Mm Thick Phenolic Laminated Sheet Top Cover For Sunken Boxes Flush To Surface For One Light Point/Fan Point Controlled By One Switch And Fan Regulator Including Pvc Insulated Unshealthed 1.5 Sqmm Copper Conductor Cable Fr-Lsh Connected To Common Earth Dolly Complete All As Specified And Directed 182 All As Per Srl Item No 181.00 (Here-In-Before) But Socket 3 Pin 5 Amp 230 Volt Flush Type On Same Board 183 All As Per Srl Item No 181.00 (Here-In-Before) But For One Socket Point Outlet 3 Pin 5 Amp In Incdependent Board 184 All As Per Serial Item No 181.00 Of Boq Here-In-Before But For 15 Amp Socket Out Let By Using 1.5 Sqmm Pvc Insulated Unsheathed Copper Conductor Cable Fr-Lsh Multi Strand On Independent Board Including Provn 2.5 Sqmm Unsheathed, Multi Stranded Copper Conductor Cable Fr-Lsh Continues As Earth Wire Connected To Earth Dolly Etc Complete In Existing Conduit Complete All As Specified And As Directed By Engineer-In-Charge. 185 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 5 Amp Complete All As Specified 186 Supply And Fixing Switch Piano, Flush Type Single Pole, One Way 15 Amp Complete All As Specified 187 Supply And Fixing Socket Outlet 3 Pin, 5 Amp Flush Type All As Specified 188 Supply And Fixing 2 In 1, 3 Pin, 5 And 15 Amp Flush Type Complete All As Specified 189 Supply And Fixing Modular Switch One Way , 6Amp/10Amp ,1 Module, Single Pole, 250 Volts ,Ac Supply, Isi Marked , Complete All As Specified And Directed By Engineer-In-Charge 190 Supply And Fixing Modular Socket Outlet , 6 Amp-2/3 Pin Combined 2 Module , 230 Volts , Multipurpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 191 Supply And Fixing Modular Switch One Way 16 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 192 Supply And Fixing Modular Switch Two Way 6 Amp, Single Pole, 1 Module 230 Volts , Ac Supply , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 193 Supply And Fixing Modular Bell Push Switch 6A 1 Module , Isi Marked Complete All As Specified And Directed By Engineer-In-Charge.Note: (I) Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 194 Supply And Fixing Modular Socket Outlet 6Amp/16Amp-2/3 Pin Combined,2 Module ,230 Volts ,Multi Purpose, Ac Supply, Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 195 Supply And Fixing Fan Regulator, Modular Type, 5 Step, High Speed, Two Module Complete All As Specified And Directed By Engineer-In-Charge. 196 Supply And Fixing Ceiling Rose 3 Terminal Flush Type 6 Amp 250V ,Isi Marked ,Ac Supply, Topline Series With Polycarbonate 20Mm X 50 Mm Two To Three Terminal, Complete All As Specified And Directed By Engineer-In-Charge. 197 Supply And Fixing Electric / Electronic Bell, Ding Dong Type 230 Volt Ac Supply,Isi Marked Complete All As Specified And Directed By Engineer-In-Charge. 198 Supply And Fixing Wall Mounted Extruded Aluminium/Polycarbonate Led Batten Fixture T8(G13 Holder) 1.2 M Including One Led Retrofit Tube 20(±10) Watt. 1.2 M T8 6500 Efficacy Not Less Than 90 Lumen/Watt Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete Including Making Connection Complete All As Specified And Directed 199 Supply And Fixing Lamp Holder ,Isi Marked Of Pvc/Polycarbonate Type With Back Plate Suitable For Batten Fitting With And Including 9Watt Led Retrofit Lamp (Base B-22) Complete All As Specified And Directed By Engineer-In-Charge. 200 Supply And Fixing Lamp Holder Pvc/ Polycarbonate Type With Back Plate Suitable For Batten Fitting With Led Bulb 5 Watt Lamp Base- B-22 Complete All As Specified And As Directed By Engineer-In- Charge.Note: Labour Element For Taking Down Old Unservicable Material Is Included In Serial Item No.172.00 Of Boq Here-In -Before And Nothing Shall Be Extra Paid On This Account. 201 Supply Only Led Bulb 9 W (Suitable For B22 Base), 250V Ac, Green/Red/ Clear Day Light ( Cdl) In Colour Complete All As Specified And Directed By Engineer-In-Charge.As Per Direction Of Engineer-In-Charge Colour Of Led Luminiure Cdl/Warm White Shall Be Provided By The Contractor As Per Site Requirment And Nothing Shall Be Paid Extra On This Account.Notes:(A) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Led Bulb Complete Including Lamp/ Strip From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led Bulb . (B) All Led Bulbs Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (C) Scope Of Work Shall Include To Fix Led Bulb Walls/Ceiling Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account.(D) Old Unservicable Retrieved Material Shall Be Deposited In The Store Yard Of Age E/M Ge (North) Bathinda By The Contractor His Own Arrangements And Nothing Shall Be Paid Extra On This Account. (E) The Rate Of Electric Connection Connecting With Using Flexible Copper Wire Twin Core Upto Ceiling Rose/Connector Is Included In This Item And Nothing Shall Be Paid Extra On This Account. 202 Supply And Fixing In Replacement Led Panel Light Fitting Recessed Mounted,Square Shaped Of Size 600Mm X 600Mm , 36 (±10%) Watt, Efficacy Not Less Than 100 Lumen/Watt , Extruded Aluminium/Polycarbonate, Pc Diffusor And Inbuilt Driver Complete As Per ManufacturerS Instructions With And Including Connection With Flexible Twin Core Copper Cable Of Size 23/.00076 From Ceiling Rose To Fitting Complete All As Specified And As Directed By Engineer-In- Charge. 203 Material And Labour In Replacement Sub Main Wiring Complete With Two Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh With And Including Single Core 6 Sqmm,1100 Volts Grade, Pvc Insulated, Multi Stranded Copper Conductor Cable Frlsh For Earth Wire In Existing Pvc Concealed Conduit (Colour Code Phase-Red, Neutral-Black And Earth As Green) Complete All As Specified And Directed By Engineer-In-Charge. Notes:-(A) Three Single Core 6 Sqmm Frlsh Pvc Insulated Unsheathed With Multistranded Copper Conductor Cable 1100 Volts Grade Shall Be Measured As One Length. 204 Supply And Fixing In Replacement Mcb 40Amp -63 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 205 Supply And Fixing In Replacement Mcb 6Amp -32 Amp Sp ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 206 Supply And Fixing In Replacement Mcb 32 Amp Spn ,240Volt , Rupturing Capacity 10 Ka , Curve ‘C’ Isi Marked, Complete All As Specified And Directed By Engineer-In-Charge. 207 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 8 Way 240 Volt, Ip -54, 200 Amps Rated Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 208 Supply And Fixing Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Double Door, Powder Coated Db Spn 12 Way 240 Volt, 200 Amps Rated Copper Bus Bar, Dust And Vermin Proof Suitable For Incorporation Of McbS And Isolators Etc Complete Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 209 Supply And Fixing In Replacement Sheet Metal Enclousers Made Out Of Crca Mild Steel Sheet Not Less Than 1.2Mm Thick,, Ip-54 Protection, Flush Mounted For Metal Door, Powder Coated Db Tpn 4 Way, 415 V Ac With 63 Amps Rated Bus Bar, Double Door, Dust And Vermin Proof Suitable For Incorporation Of Incoming Mccb And Outgoing Mcb Sp/Tp And Earth & Neutral Bus Bar Etc Complete All As Specified And As Directed By Engineer-In- Charge.Note: Mcb/ Isolators Shall Be Measured And Paid Seperately Under Appropriate Item Of Boq. 210 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 20 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 211 Supply And Fixing Wall Mounted Extrdued Aluminium Housing Led Betten Fixture With Tube 1.2 M, 25 Watt Inverter Type, 1.2 M 3000/6500K, Efficacy Not Less Than 90 Lumen/Watt, Extruded Aluminium/Polycarbonate, Pc Diffusor And Integrated Inbuilt Driver Complete Including Making Connection Complete All As Specified And As Directed By Engineer-In- Charge. 212 Supply And Fixing Led Batten Fitting 1X10 Watt, 6500K, 2 Ft Complete With Decorative Ultra Slim Square Profile Led Lighting Fixture With Extruded Polycarbonate Environment Friendly, Energy Efficient Complete With All Light Connection All As Specified And Directed 213 Supply And Fixing In Repair Led Street Light Fitting 35 Watt 230 V Ac Outdoor Type With High Pressure Die Cast Aluminium Hosing And Heat Resistant Complete With Driver, Lamp Bracket With Impact And Corrosion Resistant Complete With Ip 65/66 Protection Including Fixing With Gi/Ms Bracket Made Out Of Suitable Size Of Light Grade Tube Upto 1.2 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Iron With Suitable Bolt And Nuts Complete With Making Connection Complete All As Specified And Directed 214 Supply & Fixing Building Security Led Light Of 35 Watt , Ip 66 , Luminaire With High Power With Toughened Glass Complete As Per ManufacturerS Instructions With And Including Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt ,Nuts And Washers Complete And Fixing To Wall / Column With And Including Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size And Testing Complete All As Specified And Directed By Engineer-In-Charge. Notes:(A) The Rate Of Bracket Made Out With 40Mm Bore Galvanised Iron Light Grade Pipe 1.20 Mtr Length Bent To Shape With 02 Sets Of Ms Clamps Made Out Of Minimum 3 Mm Ms Flat Iron With Suitable Bolt And Nuts And Electrical Connection With 1.5 Mtr Long Twin Core Round Copper Conductor Cable Of Suitable Size Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (B) Contractor Has To Furnish A Replacement Warranty Of 02 Years For Security Led Light Fittings Complete Including Lamps From The Certifiy Date Of Completion Of Ca. The Product Will Be Replaced Free Of Cost In The Following Case :-(I) Manufacturing Defects.(Ii) Failure Due To Mechanical And Electrical Impact. (Iii) Drop In Lumen (Or Lux At 1 M) Below 90% Of Clamied Values Of Lumen(Or Lux At 1 M) Of The Led /Luminaries. (C) All Security Led Light Must Meet The Provision Laid Down In Is - 16101, 16102 Part -I/Ii,16103 Part -I, 16104,16105,16106, 16108/2012 And 15885 Part -Ii / Section 13. (D) Scope Of Work Shall Include To Fix Security Led Light Fittings Walls/Building Which Includes Needful T & P And Required Accessories Etc If Any, Complete Including Making Connection, Testing Etc Complete. No Extra Payment Is Admissible On These Account. 215 Supply And Fixing Jointing Of Double Walled Corrugated Pipe (Dwc) As Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 216 Supply And Fixing Jointing Of Snap Fit Coupler For Double Walled Corrugated Pipe (Dwc) Of Ug Cable Protection Complete Of Size 63 Mm, Complete All As Specified And Directed By Engineer-In-Charge 217 Supply And Fixing Mccb With Adjustable Type, 4 Pole, 63 Amps, 415 Volts, 50 Hz, 25 Ka And Including Sheet Metal Enclosure Out Door Type Made Out Of 3.15 Mm Thick Crca Sheet Mounted On Angle Iron Padesta Including Grouting Complete All As Specified And Directed By Engineer-In-Charge. 218 Material And Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600Mm X 600Mm X 6 Mm Thick Burried Directly In Ground To Depth Of Pit Not Less Than 2.25 M Below Normal Ground Level With Top Edge Of The Plate Not Less Than 1.5 M Below Normal Ground Level Surrounded From All Sides By 15 Cm Thick Packed Layer Of Charcoal / Coal Dust And Common Salt Filling In Alternate Layers And Connected To Galvanised Earth Lead Wire 4 Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Gi Or Steel Including Gi Protection Pipe 15Mm Dia Light Grade Upto The Extent Of 7.5 Metre And Connecting To Earthing Test Point, Main Switch Board Including Gi Pipe 20 Mm Dia Light Grade For Watering, Ms Funnel And Bringing Out The Watering Pipe Upto 30 Cm Above The Normal Ground Level Plugged At Top Including All Fitting Including Pcc Earth Pit With Pcc 1:2:4 Type B-1 Using 20Mm Graded Stone Aggregate And Rcc Pit Cover Including Necessary Earthwork And Excavation In Any Type Of Soil Complete All As Specified As Shown In Electrical Plate No 3 Of Ssr Part-I And Testing On Completion. Note:- (I) Earth Continuity Of Gi Wire 4 Mm Including Protection Pipe Up To 7.5 Mtrs From Earth Electrode Will Be Included In Unit Rate, Complete All As Specified And Directed. (Ii) The Rate Of Earth Work In Soft/Loose Soil I.E. Excavation, Returing Filling And Removal, Form Work Is Included In This Item And Nothing Shall Be Paid Extra On This Account. (Iii) Pcc Chamber Shall Be Constructed At Least 1.5 Metre Away From The Earth Electrode And Pipe For Watering Shall Be Provided In Slanting Manner. (Iv) The Earth Testing Arrangement Should Be Done By The Contractor As Per Direction Of Engineer-In-Charge. 219 Supply And Fixing 1100 Volts Grade Heavy Duty Cable Pvc Insulated Aluminium Strandred Conductor 6Sqmm, Served With Inner Sheathing Of Pvc Tape And Overall Pvc Sheathed In Service Connections Suspended By Insulating Hangers Not More Than 1 Mtr Apart Including 4Mm Suspenstion Wire, One Twin Core Cable Flat All As Specified And Directed 220 Supply And Fixing In Replacement Exhaust Fan 300Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 221 Supply And Fixing Exhaust Fan 250Mm Sweep (Heavy Duty) Steel Body, Bee, 5 Star Rated ,Ac Supply, Single Phase ,230 Volts, 50Hz,1200Rpm With And Including Frame Including New Mosquito Stainless Steel Wire Mesh Of Guage 0.36Mm With Suitable Wooden Frame Protection Against Birds Etc. Mounted In Suitable Opening Arrangmement In Wall And Electric Connection With And Including Three Core Pvc Insulated Pvc Sheathed Copper Conductor Flexible Cable 24/0.2Mm Drawn In Flexible Pvc Conduit And Hanging On Wall With 04 Nos. Steel Fastners 10Mm Dia 100Mm Long With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 222 Taking Down Unserviceable Complete Ceiling Fan Along With Blades And Deposited To Age E/M Store Yard Of Ge (South Bathinda) Complete All As Specified And Directed By Engr-In- Charge. 223 Supply & Fixing Ceiling Fan Of 1200Mm Sweep Complete With Blades, Down Rods, With And Including Remote Control, Single Phase, 50 Hz, Min Air Delivery 210 Cfm With Service Value 6.00 Bee. Five Star Rated With Brushless Direct Current (Bldc) Motor Connecting Up Complete With And Including Three Core Flexible Pvc Insulated Multi Stranded Copper Conductor Cable Of Suitable Size From Ceiling Rose / Connector, Including Extra Gi / Ms Pipe Down Rod, As Per Site Requirement , With And Including Serial Number Of Fan As Issued By Engineer-In-Charge And Ge Office Name With Red Colour Permaent Marker Complete All As Specified And Directed By Engineer-In-Charge. 224 Dismantling And Taking Down Of Existing Energy Meter And Refixing The Same Complete All As Specified And Directed By Engineer-In- Charge, 225 Dismantling And Taking Down Existing Geyser And Deposit In The Safe Custody / Store Yard Of Age E/M Of Ge (S) Bathinda And Refixing The Same After Carring Out Repair Work/ Rewiring Accn )Complete All As Specified And Directed By Engineer-In- Charge,
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 4
42.
Defence #11198549 AOC
Tender For Spl Repair To Certain Md Accn In Kandhar Line Under Ge Central Delhi Cantt-10; 1 Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc including remove alldebris at 2 KM away from site complete all as specified and directed. 2 M&L for 15 mm thick rendering in cement mortaron fair faces of brick work or concrete surfaces, applied in two layers i.e. 1st layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd (top) layer of 5 mm thick rendering in cement mortar (1:4 )mixed with WPCfinished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately) 3 M&L for rendering 10 mm thickin CM 1:6 on fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 4 M&L for rendering 5 mm thick in CM 1:3 on ceiling concrete surfaces finished even and fair without using extra cement complete all as specified and directed. 5 M&L for preparation of new plaster surfaces of wall and applying water proof wall putty 1-2 mm thickness over plastered surfaces to prepare the surfaces even and smooth and finishing walls with Two coats @ 1.67 ltr/10 Sqm each acrylic smooth exterior paint of required shadeover and including priming coat of exterior primer @ 2.20 Kg/10Sqm complete all as specified and directed. 6 M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified and directed. 7 M&L for Preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper complete all as specified and directed. 8 M&L for complete removal of existing treatment of old decorated plastered or unplastered surfaces of wall by rubbing , brooming down, washing with water etc and applying two coats of oil bond distemper complete all a specified and directed. 9 M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing tretament, by rubbing brooming down, washing with water etc and providing and applying 1-2 mm thickness wall putty over plastered surfaces to prepare the surface even and smooth and finishing wall surfaces by applying Two coats @ 1.67 ltr/10 Sqm each with acrylic smooth exterior paint of required shade over and including priming coat of exterior primer @ 2.20 Kg /10Sqm complete all as specified and directed. 10 M&L for dismantling water tanks of capacity exc 250 litres & n. exc 500 litres complete all as specified and directed. 11 M&L for rotational moulded polyethylene water storage tanks (ISI Marked) white colour 500 litres capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene ball complete all as specified and directed. 12 S&F 15 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 13 S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed 14 Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer) complete all as specified and directed. 15 Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) complete all as specified and directed. 16 Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting pointcomplete all as specified and directed. 17 M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone crushed aggregates) on roof padding, surface finished even and smooth without using extra cement complete all as specified and directed. 18 M&L for providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer or equivalent (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalentcomplete all as specified and as per manufacturers instructions. 19 M&L for providing and applying Smartcare Dampproof or equivalent, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per manufacturers instructions and all as specified & directed. 20 Supply only integral water proofing compound (ISI marked) complete all as specified and directed 21 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified and directed 22 M & L for brick work with Cement Mortar 1:6 using sub class B bricks, old size, straight or curved on plan exceeding 6 m mean radius complete all as specified and directed. 23 All As per item no 22 before but except bricks etc complete all as specified & directed 24 Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed. 25 Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 26 Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame) complete all as specified & directed 27 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified & directed. (M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately). Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 28 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified & directed. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 29 S&F Factory Made single extruded WPC (Wood Polymer Composite) Solid door/window/Ceosetory windows & other frames/ chowkat of size 65 x 125 mm comprising of virgin PVC polymer of K value 50-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non-toxic additives (max toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face & 1100 N Edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS Holdfast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engr incharge. Note: For WPC solid door/windows frames,minus 5mm tolerance in dimension i.e depth and width of profile dimension on plus side shall be acceptable but no extra payment on this account shall be made. 30 S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 31 S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately).Note: MTC and Screw Out Test shall be provided by Contractor 32 Supply and fixing 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of density 650 kg/cbm manufactured by an ISO-9001-2015 certified company. Door to be panelled with SS mosquito and XTN aluminium mesh for additional strength and safety purpose (confirming as per IS 4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. SS butt hinges size 100mmx25mmx2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19x6mm size steel screws, etc. complete all as specified& directed.”Note: MTC and Screw Out Test shall be provided by Contractor 33 S&F Aluminium windowfor outer frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter(02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm ss 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. 34 S&F Aluminium windowOuter frame 40mmx114mm with 1.3mm thickness ,corner 45 degree cut & aluminum welded center mullion size 40mmx65mm also welded, shutter (02) size 40mmx60mm 1.3 thickness 45degree cut mechanically joint with 6mm alen key bolt clamp , 12mm SS 202 grade round bar at 100mm cc distance in middle 150mm cc distance for safety grill welded at both ends with 6mm SS 202 grade round bar, 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock , aluminum kobra hinges 2 nos per shutter , 40x18mm 45 degree cut & welded mosquito net shutter(02) with 0.45mm nominal dia of SS wire mesh,SS 75mm long hinges & pvc magnet,full system powder coating with pure polyster coat of any shade as approved by GE and installing with SS screw roll plug and filled with silcone complete all as specified and directed. NOTE:- For installation of windows AC/desert cooler the provn of window glass shutter with wire mesh,grill and necessary fittings and locking arrangement for subject portion will be modified as per ground requirementt during execution as direction of Engg-in-Charge. 35 S&F ventilator outer frame 40mmx40mm with 1.3mm thickness, corner 45 degre cut & aluminum welded center mullion size 40mmx65mm also welded , fixed 5mm frosted glass EPDM rubber gasket with provision for fresh air fan, full system powder coating with pure polister coat of any shade install with SS screw rol plug pvc & silicone complete all as specified & directed 36 Dismantling of wall and ceiling/cupboard board fibre pulp AC boards etc any thickness including cover fillets removing the wiring complete all as specified & directed 37 S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmhaving good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2and esistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixinng stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws complete all as specified & directed. Material test certificate and authentication should be compulsory provided by the contractor. (For WC/Bathroom/Toilet/Kitchen and Cabinets) 38 S&F stainless steel continuous (Piano) hinges, bright finish, width of flap when open 30mm, complete all as specified & directed. 39 S&F of stainless steel handles 100 mm sizefor kitchen cabinet shutters and bed room cub boards complete all as per specified and directed. 40 S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed. 41 S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws complete all as specified & directed 42 S&F SS butt hinges medium weight 100mm size fixed with SS screws (ISI Marked) complete all as specified & directed 43 S&F SS barrel tower bolt extruded section 150mm long and fixed with SS Screws (ISI Marked) complete all as specified & directed 44 S&F 150mm extruded SS handle fabricated type and fixed with SS Screws(ISI Marked) complete all as specified & directed 45 S&F 300mm extruded section SS sliding door bolt with hasp and staple and fixing bolt and nut (ISI Marked) complete all as specified & directed 46 S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar complete all as specified & directed. 47 M&L for preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed 48 M&L for preparation of Old or previously treated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified & directed. 49 S&F for stainless steel plate rack of size 90x80x25 cm depth size made out of 1mm thick sheet complerte all as specified and directed. 50 S&F in repair stainless steel sink with drainage board made out of 1mm thick sheet for kitchen with plug, washers, waste pipe, waste coupling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complete all as specified and directed. 51 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm etc complete all as specified & directed 52 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 20mm etc complete all as specified & directed 53 Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 40mm etc complete all as specified & directed 54 Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as specified and directed 55 All as per item No. 54here in beforebut 20 mm dia complete all as specified and directed. 56 All as per item No. 54 here in beforebut 40 mm dia complete all as specified and directed. 57 S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified & directed 58 Cutting chases, pinning in, for brick walls built in cement mortar, making good to facings where required and pointing in cement mortar 1:3 or PCC 1:2:4 type B-O(using 12.5 mm graded aggregate) as required for concealed water tubing etc cutting exceeding 10cm girth but not exc. 20 cm complete all as specified & directed. 59 Supply and fix in repairvitreous China wash hand basin (including pedestal)white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures complete all as specified & directed 60 Supply and fix in repairs vitreous china squatting pan Orissa pattern long pan size 580x440mm white with integral foot rests ‘standard Grade P’ or ‘S’ trap front or back inlet (excluding flushing cistern and flush pipe) complete all as specified and directed, 61 S&F in repair vitreous china wash down water closet EWC white/ ivory/off white (closedpattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flushpipe) complete in all respect complete all as specified & directed 62 Supply only PVC low level white flushing cistern valveless symphonic action type 5/10 lts capacity IS marked with inlet, ball valve, float and handle including PVC flush pipe 32 mm dia with bend and a pair of mild steel angle iron brackets of suitable size including making necessary connections to water supply pipe line and WC,(ISI Marked) complete all as specified & directed 63 S&F in repairs 15 mm dia 600mm long PVC connectionswith brass check nut complete all as specified & directed 64 S&F in repairs Glass Corner Shelf 6mm thick including CP railing radius 250mm complete all as specified and directed by Engineer-in-Charge. 65 S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railingcomplete all as specified and directed by Engineer-in-Charge. 66 S&F in repairsHealth faucet, CP brass with 1.50m long flexible pipe complete all as specified and directed by Engineer-in-Charge. 67 S&F fancy type brass chromium plated toilet paper holder, complete all as specified & directed 68 S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified & directed 69 S&Fin repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 70 S&F in repairs 2-in-1 angle valve, fancy type, chromium plated brass, 15mm, complete all as specified & directed 71 S&Ffor 15 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 72 S&Ffor 20 mm bore gate valve, gun metal, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed 73 S & F in repairs Chromium plated brass overhead shower with arm complete all as specified and directed. 74 S&F in repairs looking mirror of size 600mmx450mmx5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 75 S&F in repairs Brass chromium plated mode 2 in 1 WHB mixture model Quarter half turn (SOLO) omplete all as specified & directed. 76 S&F in repairs brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO) complete all as specified & directed 77 S&F in repairs Brass chromium plated mode 2 in 1 sink mixturemodel Quarterhalf turn (SOLO) ofas complete all as specified & directed. 78 S&F in repairs chromium plated soap dish fancy type complete all as specified & directed 79 S & F in repairtowel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embedded in cement mortar 1:3 with MS screws etc complete all as specified and directed. 80 Dismantling of floor of size not exceeding 4.00 Sqm each for EWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) The area of Each WC portion is n.exc 4.00Sqm each.(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 81 Dismantling of floor of size not exc 1.50 Sqm for IWC and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (a) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.(d) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.(f) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised manufacturers/applicator. 82 Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed. 83 M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqmbut not exceeding 0.11 sqmas in floors over and including 15mm thick screed bedin cement mortar 1:4 set and jointedin neat cement slurry and pointed in coloured cement. complete all as specified and directed 84 S&F for glazed Ceramic tiles 9 to 10 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:4 complete all as specified and directed.. 85 All as per item no. 84 here in before but on vertical surfaces as in skirting etc over and including 10mm thick screed bed in CM 1:3, set and jointed in white cement with pigment to match all as specified and directed. 86 M&L glazed ceramic coloured tiles in vertical surface600x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 10mm thick in CM (1:3) complete allas specified & directed. 87 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc incl brushing neat cement slurry with 3.0kg of cement per sqmtr complete all as specified and directed. 88 M&L for Granite (of any type) work, 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms with necessary hole for gas pipe where ever required and likes over and including cement mortar bedding of 20 mm thick in CM 1:4 including pointing in white cement using marble dust with admixture of pigment to match including rounded edges with shade of granite complete all as specified and directed. 89 M&L for machine cut kota stone slab flooring, and (one Pieces) as in tread, riser, landing, 20-25 mm thick over and including cement screed bed 20mm thick in CM 1:4laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. 90 M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part ofsand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete all as specified and directed Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer).(c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. 91 M&L for removal of plant growth by injection with chemical glyphosphate solution (4 % concentration) @ 20 ml or till refuse by cutting or injection in stem of plants or roots at 30 mm. The area shall then be sprayed with solution 25 ml glyphosphate (4% conc) diluted with 1 ltr of water.All roots of plants shall be removed completely and making good the disturbed surface and painted with cement base or acrylic paint complete all as specified and directed. 92 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 93 M&L for 75 mm thick cement concrete 1:3:6type C2(using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete all as specified and directed 94 M&L for 40 mm thick cement concrete 1:2:4type B0(using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fairusing extra cement, complete all as specified and directed 95 Demolition of reinforced cement concrete in any position complete all as specified and directed 96 M&L for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone crushed graded aggregate) as in louvers and jallies 25mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown complete all as specified and directed 97 M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone crushed aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed. 98 Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed. 99 S&F TMTmild steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed. 100 Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter including bends complete all as specified and directed . 101 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete all as specified and directed . 102 S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete all as specified and directed 103 S&F for PVC (SWR) bends & tee any radius, 110 mm bore complete all as specified and directed. 104 S&F for PVC (SWR) bends & tee any radius, 75 mm bore complete all as specified and directed. 105 S&F for PVC (SWR) door plates , Yjunction 110 mm bore complete all as specified and directed. 106 S&F for PVC (SWR) door plates ,T junction 110 mm bore complete all as specified and directed. 107 S&F for 100 PVC (SWR) bends with door plate& teecomplete all as specified anddirected. 108 S&F for 75 mm PVC (SWR) bends with door plate & tee complete all as specified anddirected. 109 S&F for 75 mm bore PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in solvent cement concrete complete all as specified anddirected. 110 S&F in repair 20 mm nominal dia and minimum thickness 1.2mm of SS-304 Grade of Stainless Steel tubefor curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed. 111 Dismantling wrought iron or mild steel work of any description not otherwise provided for parapet railing, balconies, tank staging, metre rooms shaft areaany descriptioncompleteas specified and directed. 112 Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm including welding complete all as specified and directed. 113 S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed 114 Dismentling asbestos cement corrugated orsemi corrugated sheets in roof fixed with L hook or cranked bolt complete all as specified and directed 115 S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge 116 S&F in repairs two legged aluminium floor door stopper with rubber shoe 140mm long complerte all as specified and directed by Engineer-in-Charge. 117 ROAD, PATH AND CULVERT 118 Demolition of cement concrete (un-reinforced) in any floor n.exc 15cm thickness ( below or above ground level ) not otherwise specially providedincluding removal of rubbish out side complex (MOD land), complete all as specified and directed 119 M&Lfor 75 mm thick PCCtype D-2 1:4:8 (40mm graded aggreate) as sub-base complete all as specified and directed 120 S&F Endura colour paving tiles 30cm X 30cm x 15-20mm double charged digital printed with gloss, polished matt finished jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. 121 M&L for Providing PCC in coping type B-1, 1:2:4 using 12.5mm graded stone aggregate complete all as specified including necessary form work and finishing the exposed surface even and smoth with using extra cement complete all as specified and directed 122 M&L for broken stone boulders of hard core of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surfaces complete all as specified and directed 123 SEWAGE DISPOSAL 124 Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified and directed 125 Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed 126 Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed complete all as specified and directed 127 M&L for PCC 1 : 4 : 8 type D2 using 40mm graded stone crushed aggregates as in foundation of manholes, posts etc completeall as specified and directed. 128 M&L for PCC 1 : 2 : 4 type B1 using 20mm graded stone crushed aggregates as in surfaces channels and drains complete all as specified and directed. 129 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stoped ends etc complete all as specified and directed. 130 S&F DWCPE(SN8) 150mm dia (Internal Dia)pipes, snap fit coupler and rubber ring including testing and laid and properly jointed laid in trenches to a level on concrete bed complete all as specified and directed. 131 Demolition of brick work built in cement orcement lime mortar of any description including quoins,arches,pillars,etc., complete all as specified & directed 132 M&L for Brick work with sub class ‘B’ bricks straight or curved on plan, built in cement mortar 1:4 using old size bricks complete all as specified and directed. 133 All as per item no 130 here-in-above but except bricks 134 M&L for PCC 1:2:4 type B1 using 20 mm graded crushed stone aggregates in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Itemwater troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed. 135 M&L for precast factory made manhole cover, area of each cover n.exc 0.60 Sqm, 100mm thick with SFRCconcretingincluding grove and hook arrangement for lifting and placing in position and sides covered by MS sheet complete all as specified and directed. 136 Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 100mm internal dia pipe, complete all as specified. 137 M&L for rendering 15mm thick on top of roof concrete in cement mortar 1:4 with water proofing compound @ 3% by weight of cement to have a smooth surface for laying of water proofing membrane. Note: Water proofing compound will be measured and paid seprately. 138 Demolition and breaking up drain pipes (glazed stone ware, AC or reinforced concrete),150 mm diapipe of any description and in any position set and jointed in cement mortar complete all as specified and directed by Engr-in-Charge 139 INTERNAL ELECTRIFICATION 140 Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc 141 Taking down old MCCB , TPN DBs , SPN DBs (incl MCB SPN & SP) & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed. 142 Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed. 143 Disconnecting elect connection and taking down of ceiling fan/ Exhaust fanof any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge. 144 M&L for point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit of 20 mm nominal diaand conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and including provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel concealed in walls, with modular sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, complete all as specified and directed for the following:- 145 One light /Ceiling fan/exhaust fan point controlled by one switch. 146 One light point controlled by two, two way switch ( switch to be measured and paid separtely) 147 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board. 148 One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board 149 One bell point controlled by one bell push. 150 All as per item Ser No 142 here-in-before but point wiring with 2.5 sqmm single core FRLS 1100 Volts in New PVC concealed conduitmedium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 2.5 sqmm single core FRLS 1100 Volts copper conductor cableas earth continuityconnected to common earthfor one 15 A switch socket power point, complete all as specified and directed 151 M&L for submain wiring 4 Sqmm nominal cross sectional area,two single core, 1100 Volts grade, multi-stranded, PVC insulated unsheathed, FRLSHcopper conductor cable with and including continuous earth wire of size 4 Sqmm nominal cross sectional area, single core, 1100 volts grade, multi-stranded, PVC insulated, unsheathed, FRLSH copper conductor cable drawing into and including rigid non-metallic PVC concealed conduit of suitable dia, medium grade with all conduit accessories and connected to common earth dolly to suitable copper lugs including all cutting/chases etc in walls and making good to the disturbed surfaces to match the existingsurfaces.Note:- Three run of single core wire andone run of conduit shall be measured and paid as one unit complete all as specified and directed 152 All as per item ser No 144 here-in-before but for 02 x 6 Sqmm for phase & neutral and 01 x 6 Sqmm for continuousearth wire concealed/surface 153 M&L for switch Modular type 6 Amp one wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 573400 / Schnider Cat No X1001WH / Wipro Cat No RF 110 154 M&L for switch Modular type 6 Amptwo wayISI marked complete all as specified and directed. Make : Legrand Cat Part No 2573402/ Schnider Cat No X1002WH/Wipro Cat No RF 210 155 M&L for switch Modular type type 16 Ampone way,ISI marked complete all as specified and directedMake : Legrand Cat Part No 573410/ Schnider Cat No X11001WH/Wipro Cat No RF 130 156 M&L for Modular type socket outlet 2 in 1, 5 pin 6 Amp ,ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573424/ /Schnider Cat No X2005WHNS/Wipro Cat No R 1212 157 M&L for Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified and directed. Make : Legrand Cat Part No 573471/ Schnider Cat No X2106WH/ Wipro Cat No R 1332P 158 M&L for ceiling rose 3 phase PVCpolycorbonate,isolated body, complete all as specified and directed 159 M&L for bell push,modular type, 6 Amp, 1 moduleISI marked complete all as specified and directed.Make : Legrand Cat Part No 573413/ Schnider Cat No X1005WH/ equivalent in Wipro 160 M&L for bell ding dong AC, 230 volts, single pole complete all as specified and directed. 161 M&L for angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete all as specified anddirected. 162 S&F LED bulb 12 watts, 1200 lumens output, 6500K suitable for B-22 base complete all as specified and directed. 163 M&L for earthing complete with GIelectrode 600x 600 x 6mm, thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below normal ground level (with top edge of earthplate not less than 1.50 mtr below normal ground level connected to GI wire 4.0 mm as earthing lead by means of bolt nuts, check nuts, and washers of brass connected including gun metal or phosphorus bronze drilled and screwed all as specified including excavation and earth work and disposal of surplus soil incl 15 mm GI tubing light grade and necessary fitting for protection of GI wire incl laying of alternate layer of charcoal dust and common salt PPC (1:2:3) type C-1 (using 20mm graded stone aggregate) for earth pit with 40 x 40 x 6mm MSangle iron frame for cover 40 mm thick (1:2:4) type B20 using 12.5 mm graded stone aggregate reinforced with 8 mm dia round bar @ 75mm C/C both way with MS handle 20mm dia plastering 15mm thick CM (1:6) internally and upto 150mm below ground level externally PGL funnel with ground wire mesh 20mm dia GI pipe Medium grade for watering complete all as shown on electrical plate No 3 of SSR Part-1 2009 and connected in earth test incl testing completed all as specified and directed. Note:- Galvanised wire and protection light grade GI pipe upto 7.5 mtr, excavation, etc shall be deemed to be in the quoted rates. 164 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 08 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 165 S&F sheet metal enclosure distribution board confirmingto IEC - 61439-3, single pole and neutral, AC 240 volts, 12 way witn 100 Amps rated copper bus bar and metal double door with IP-43 & IK 09protection along with cable end box for above DB and flush to wall including all cutting etc in wall and making good to the disturbed surfaces to match the existing complete ( Note - MCB & DB shall be of same make) 166 S&FMCB confirming to ISI/IEC -60898-1 (2002), SPN, AC, 240 volts, of 40Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 167 S&FMCB confirming to ISI/IEC -60898-1 (2002), SP, AC, 240 volts, of 6-32Amps capacityB curve, 10 kA breaking capacity & making connection by using using suitable copper lugs complete all as specified and directed. 168 Supply and fix in replacement LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.90, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1,Short circuit and over circuit protection, voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 120 Lumens/watt andincluding connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed completeallas specified and directed. 169 S&F in replacement of LED batten luminaire surface mounted 2 feet system wattage of 10 watts and not less than 1000 lm with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.90, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, voltage range - 140 to 270 volts AC, temperature range 0 to 50 Degree C, system efficiancy at luminarie level ≥120 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. 170 M&L for in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate,Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 Including 12 W retrofit LED BULB (B-22 base). NOTE- one piece of LED bulb 12 watts included with city -1 fitting complete all as specified and directed. 171 Supply and fix in replacement 10 watts bulkhead fitting, IK 09 with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover,including connecting up with necessary PVC sheathed 3 core 1.5Sqmmcopper conductor flexible wire fixed completeallas specified and directed. 172 Taking down existing electric meter & refixing the same after completion of job with electric connection by 8 way DB in good way by cleaning and qtr No. marking complete all as specified and directed.. 173 Supply and fixingexhaust fansmetal body AC single phase 230/240 V of size300 mm sweep, Air flow rate > 900cum/min, Bird screen forprotectionagainst birds, double ball bearing, metal body with louvre also with louvre for fixing of exhaust fan complete all as specified and directed. 174 Supply and fixing new BLDC fan against old ceiling fans BLDC conversionthree blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5star rating for energy saving, rated Air delivery >220 cum/min,AC single phase 230/240 V of size 1200 mm sweep including fan regulators,down rod, canopy & all accessories including making connection with three core flexible, copper winding in fan,copper cable pvc insulated of suitable length, complete all as specified and directed. NoteBLDC Fan should work onelectronic fan regulator & also with remote controled. 175 S&F modular type sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall complete all as specified and directed. 176 S&F of water heater storage type Geyser vertical type with suitable size of fastner and, inner tank material of superior glass line tank and outer body material of ABS with high pressure with standing enabling (up to 8 bar pressure) capacity including provision and connecting up of SS braidedpipe with adopter for inlet and outlet wwater connection having edjustable knob for temperature control and inner tank should be glass line coated, capacity25 Ltrs, having heating element 1.5 KW and not less than 5 star rating,suitable for ,230 volt,50 Hz electric supply complete all as specified and directed . 177 S&F fresh air fan PVC body air delivery > 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed. 178 S&F in replacement pressure die cast aluminium housing LED street light luminaires with IP-66 deg. of protection suitable for 35 watt LED fitting, Power Factor > 0.90 voltage range - 140 to 270 Volts AC, temperature range 0 to 50 Degree C, system efficency at luminaire level > 110 duly fixed on 25 mm dia GI pipe light grade including 40 X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : Quoted rates shall be inclusive of all accessories like suitable GI pipe, 40x6 mm thick MS flat, fastner, nut & bolts, suitable length of flexiable wire etc. 179 S&F in repair factory made epoxy powder coated Distribution Board VTPN-4 ways (IP-43 protection), mechanical impactstrength IK - 09, with cement spill protector double doorfabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one MCCB 125/160 Amp as incomer and12 Nos of SP MCB 10 to 63 Amps outgoing and conforming to HSN code : 8537 complete all as specified and directed. Note :- MCCB & MCB will be measured & paid separately. 180 S&F in replacement MCCB 125 Amps, thermal magnetic release,4 pole 16 kA ICS=ICU Complete all as specified and directed.
Contract Date: May 30, 2026 Contract Value : 3.02 Crore
Statutory Bodies & Commissions/Committees No of Bidders 11
43.
Defence #11191790 Price Bid
Tender for Dismantling Plain Or Corrugated Steel Sheeting Any Guage, Thickness, Including Nainital Pattern Or Similar Pattern Roof Covering Complete All As Specified And Directed. , S&F 0.63Mm Thick Galvanised Corrugated Ms Sheeting (Cgi Sheet Roofing) With Two Corrugation Side Laps, With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusive Fixed With Coach Screws And Washers As In Roofs Etc All As Specified , S&F 0.63Mm Thick Plain Galvanised Ms Sheeting Using Grade-O Sheets With 120Gm Zinc (Spelter) Coating Per Sqm Both Sides Inclusives, As In Roof, Ridges, Hips, Valley Gutters, Drip And Straight Flashing Complete All As Specified And Directed. , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Corrugated Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa (Az 150) As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , S&F Pre Painted Galvalume Aluminium Zinc Coating Gi Based Plain Steel Sheet 0.50 Mm Thick Of An Colour Having Tensile Strength Of 550 Mpa As In Roof Covering / Cladding To Wall , Fixed With Self Tapping Screw As Specified And Directed , Demolition Of Brick Work Or Stone Masonry Precast Plain Cement Concrete Block Walling Built In Cement Mortar Complete All As Specified And Directed. , M&L For Brick Work With Sub Class B Bricks Using Old Size Bricks Straight Or Curved On Plan Exc 6 Mtr Mean Radius, Built In Cm 1:6 All As Specified And Directed. , M&L For Precast Cement Concrete Block Masonery With Solid Block Of Cement Concrete 1:3:6 Type C-1 ( Using 20 Mm Graded Stone Aggregate) Exc 10 Cm In Width And Setting In Cm 1:6Complete All As Specified And Directed By Engg-In- Charge , Taking Down Cement Or Cement Lime Plaster Of Any Description On Brick Or Plain Cement Concrete Blocks Or Stone Wall Or Concrete Surface Etc Including Racking Out Joints, Hacking For Keys, Scrubbing Down With Water Etc All As Specified And Directed. , M&L For Rendering 15 Mm Thick Readymade Plaster On Inner/Outer Walls By Adding 17-19% Of Potable Water By Weight Of Material For Thickness Above 15Mm It Is Recommended To Be Applied In Multiple Layers. Ready Mix Plaster Shall Complies With Is 1661-1972, Is 2250-1965, Is 2402-1963 And Confirms The Compressive Strength @ 28 Days 10-12 Mpa/Bulk Density 1500-1600 Kg/M3. (Note : The Rate Quoted By Contractor Shall Include Cleaning Of Surface, Application As Per Instruction And Scaffolding Upto 20 Mtr Ht All As Specified And Directed) , M&L For Applying Two Coats Of Cement Base Paint Over A Coat Of Primer On Newly Plastered Surfaces Of Walls Including Preparation Of Surfaces Complete. , (M&L For Preparation Of New Plastered Surfaces & Applying A Layer Of Birla Putty 3Mm Thickness On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Distemper Complete All As Specified And Directed. , (M&L Three Coats Of White Wash On Walls Including All Preparation Complete , M&L Preparation Of Old Surfaces Including Cornices Etc And One Coat Of Oil Bound Distemper Complete All As Specified And Directed. , M&L For Preparation Of Old Plastered Surfaces & Applying A Layer Of Birla Putty On Wall Surfaces Including Cornics Etc For Proper Levelling Of Plaster And Two Coat Of Oil Emulision Paint Complete All As Specified And Directed. , Dismantling Of Ceiling Board (Flbre Pulp, Insulation Etc) Or Insulation Boards/Slabs/Blankets Any Thickness, Including Cover Fillets Complete All As Specified And Directed. , S&F Of Powder Coated Grid Frame Work For False Celling Comprising Of The Following Sections For Making Partitions Of 600X600 Mm Size Fixed To Walls With Rawl Plugs & Screws And Hanged To Roof With And Including 4Mm Dia Gi Wire Suspender Of Suitable Length And Butterfly Clips, Size Of Main Tee Shall Be 28Mmx24mmx0.3Mm Thick , Cross Tee Shall Be 28Mmx24mmx0.3Mm Thick And Wall Angle Shall Be 24Mmx24mmx0.3 Mm Thick Incl 4 Mm Thick E-Board Classic (Make-Everest) For Insulation And Accoustic Purpose, 595 X 595 Mm Size Fixed With Staples On Snap Grid As In Ceiling With And Including Dusting Of Surface Complete All As Specified And Directed.Complete All As Specified And Directed , S&F Solid Pvc Wall Lining Dual Colour Consisting Of 5 Mm Thick Wood Grain Printed Pvc Sheet Inclusive Of Solvent Cement And Fixing At Site On Pvc Frame As Per Specification And Drawing Complete Fixing Arrangement Icluding Taking Down Old Existing Wooden Panelling Complete. , S & F For 5Mm Thick Pvc Sheet Fillet Of Width 35Mm For Wall Paneling Inclusive Of Fixing On To Wall To Make Pvc Frame As Per Specification And Drawing. , Demolition Of Cement Concrete (Unreinforced) In Ground Floors And Pavings Not Exc 15Cm Thickness (Below Or Above Ground Level) Complete All As Specified And Directed. , M&L For Cement Concrete 1:4:8 Type D-2 (Using 20Mm Graded Stone Agg) As In Foundation , Filling And Mass Concrete Complete All As Specified And Directed. , M&L 40 Mm Thick Plain Cement Concrete Type B-1 (1:2:4) Using 20 Mm Graded Stone Aggregate As In Flooring Finishing Cement Concrete Even And Smooth With Using Extra Cement Complete All As Spd , Surface Channel In Concrete 1:3:6 (40 Mm Graded Aggregate) For Drain Complete All As Specified And Directed. , Extra For Forming Fair Finished Drain Or Channel 30 Cm Inner Girth In Cement Complete All As Pecified And Directed. Concrete, Using Ex- Tra Cement, Including Forms, Moulds, Mi- Tred/Stopped Ends Etc.All As Specified And Directed. , M&L For 75Mm Thick Cement Concrete 1:3:6 Type C-2 (Using 40Mm Graded Stone Agg) As In Plinth Protection Laid To Slope In Bays And Finishing The Surfaces Of Concrete Topping Fair And Even And Exposed Edges Fair Or Rounding Or Chamfering Laid In Panels Wit , M&L Chequred Tiles 300 X 300 X 25 Mm Coloured Glossy Finish Rubber Pressed Moulded Of Approved Pattern & Shade Make As Approved By Ge As In Floor Over 15 Mm Thick Screed Bed Or Bedding Layer In Cm(1:4) And Jointed Complete All As Specified And Directed. , M&L Interlocking Tiles 75-80 Mm Coloured Rubber Pressed Glossy Finish Thick Of Approved Pattern & Shade Isi Marked Or Approved By Ge Set Jointed Over 40 Mm Th Fine Sand Cushion Including Sides Are Tappered 75 Mm In Width By Plain Cement Concrete 1:3:6 Type C1 (Using 20Mm Graded Crushed Stone Agg.) Complete All As Specified And Directed. , Dismantling Boarding, Any Description, Fixed In Any Position With Nails Complete All As Specified And Directed. , Dismantling Of Timber Scantling 40 Sqcm And Over In Section In Any Position As In Framed Work Complete All As Specified And Directed , M&L For 2Nd Class Hard Wood Clean Sawn In As In Scantling Framed And Over 40Sqcm Fixed With Screws Etc All As Specified And Directed. , S&F 18Mm Thick Mdf Board Both Side Finished As In Wardrobe/ Cup Board Shutter All As Specified And As Directed By Engineer-In-Charge. , Dismantling Of Stone Slabs And Tiles Of Any Description Or Thickness In Floors Laid Bedded And Pointed In Any Mortar, Aprons Etc. , M&L Plain Cement Concrete 1:5:10 Type E2 Using 40Mm Graded Aggregate As In Sub Base Complete All As Spd , Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding (But Not Backing) Removing Serviceable Tiles To Store And Rubbish Off The Premises Complete All As Specified And Directed. , M&L 300X450x7mm Thick Glazed Ceramic Digital Tiles Coloured Incl , Design And Pattern As Approved Fixed As In Vertical Surface Etc, Set And Jointed In Neat Cement Slurry And Pointed With White Cement With Colour Pigment To Match Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed. , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.11 Sqm But N.Exc. 0.18 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigment Incl 15Mm Thick Screed Bed In Cm 1:6 Complete All As Spd , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.18 Sqm But N. Exc. 0.38 Sqm In Floors Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigments Incl 15Mm Thick Screed Bed In Cm 1:6Complete All As Spd , M&L Colour Non Skid Ceramic Tiles 7 To 8 Mm Thick ( Square/ Rectangular) Area Of Each Tiles Exc. 0.18 Sqm But N. Exc. 0.38 Sqm In Skirting /Dado Etc Set And Jointed In Neat Cement Slurry And Pointed In White Cement With Colour Pigments Incl Rendering 10 Mm Thick On Fair Faces Of Brick Work Or Concrete Surfaces In Cement Mortar 1:4 Complete All As Specified And Directed.Complete All As Spd , M&L 18 To 20 Mm Thick Granite Stone On Steps Including Rubbing And Polishing And Making Hole For Gas Pipe And Front Portion Rounded And Chamfered Complete Including Screed Bedding 15 Mm Thick In Cm 1:4 Complete All As Spd , S&F In Repairs Parquet Flooring 8.3 Mm Thick Hard Board Plank Both Side Laminated With Decorative Surface And Approved By Ge Laid Above The Thermoplastic Sheet Complete All As Spd , Taking Up Or Down 15Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , Taking Up Or Down 20Mm Dia Steel Tubing And Connections By Disconnecting Fittings/Tubing From Existing Tubing Were Required Including Cleaning For Refixing Or Removal From Site Complete All As Specified And Directed. , M&L For 15Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , M&L For 20 Mm Bore Gi Tubing, Medium Grade, Galvanised With And Including All Gi Fittings And Fixed Complete To Walls And Ceiling Or Laid In Floors Complete All As Specified And Directed. , S&F In Repair 15Mm Dia Bib Tap Long Body Cp, Screwed For Iron Pipes Complete All As Specified And Directed , S&F Angle Cock 15 Mm Bore Brass Chromium Plated, Screwed Both Ends For Pipes Or For Unions Fixed In Repairs Including Making Good To Match With Existing Surface , S&F In Repair Pillar Taps 15 Mm Bore, Brass Chromium Plated , Screwed Down High Pressure With Or Without Letter Hot Or Cold With Long Screwed Shanks And Fly Nut Complete All As Specified, Fixed In Repairs. , S&F Bib Tap Standard Of Ptmt (Polytetra Methylene Terephthalate Engineering Thermoplastic Bath Fitting), Any Colour, Screwed Foriron Pipe 15 Mm Bore Pipe (Minimum Weight 90 Gm) All As Specified, Fixed In Repairs (Make : Prayag Or Equivelent As Approved) , S&F In Repair Polymer White (Polypropeylene Delrin And Abs) Low Level Flushing Cistern 10 Ltrs Capacity, Valveless, Syphonic Action Type Complete With Inlet, Ball Valve Float Valve, Bends Brackets, Rawl Plug, Brass Screws Handle Etc Complete, Complete All As Specified And Directed. , S&F In Repairs, 550X400mm Vitreous China, Wash Hand Basin , Flat Back With Pedestal Excluding Trap And Waste Chain And Plug And Porcelain Stopper Including Sutaible Size Brackets Waste Pipe And Waste Coupling Complete All As Specified And Directed. , S&F Vitreous China Squatting Pan Orrissa Pattern Size 580 X 440 Mm White With Intregal Foot Rests, With & Including P Or S Trap (Excluding Material & Labour Of Flushing Cistern And Flush Pipe) Including Conection To Trap And To Flush Pipe Etc Complete Including Making Good To Floor Complete All As Specified And Directed Fixed In Repairs. , Dismantling Water Tanks 500 Ltrs Capacity Complete All As Specified And Directed. , Dismantling Water Tanks Of Any Description, Capacity Exceeding 500 Litres But Not Exceeding1000 Liters Complete , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 500 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Make - Prayag Complete All As Specified And Directed. , S&F Rotational Moulded Polythene Water Storage Tanks (Cylindrical Vertical With Closed Top) Hoisted And Fixed In Postion 1000 Ltrs Capacity And Including 20Mm Dia Ball Valves, High Pressure Of Ptmt With Epoxy Coated Aluminium Rod And High Density Plastic Ball Screwed For Iron Pipe Minimum Weight 210 Gram Of Make - Prayag Complete All As Specified And Directed. , S&F 20 Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Road & High Density Plastic Ball Screwed For Iron Pipe And Fixed In Repairs (Min Weight 210 Gm). , S&F 15 Mm Dia Ball Valves High Pressure Of Ptmt With Epoxy Coated Aluminium Road & High Density Plastic Ball Screwed For Iron Pipe And Fixed In Repairs (Min Weight 210 Gm). , S&F Pvc Circular Top Cover Suitable To Rotational Moulded Polyethylene Water Storage Tanks Of 500 /1000 Litres Capacity Tanks Of Standard Mares, With 6 Mm Dia Nut And Bolts On Two Ends Of Cover To Act As Hinge As Will As Locking Arrangement For Side Opening , S&F In Repairs Sinks With Drainage Board Made Of Stainless Steel 1Mm Thick Kitchen Or Laboratory With Plugs,Washers And Wastes,Including Bedding In Cement Mortar To Dwarf Wall Or Including Fixing Cautilever Brack Etc And Connecting Union To Pipe Over All Size 915Mmx460mm Bowl Size 405Mm X 354Mm X 178Mm As Approved By Gecomplete All As Specified And Directed. , S&F Pvc Whb Waste Pipe 32/40 Mm Dia Compolete All As Spd , S & F In Repairs 15 Mm Bore Fancy Type Chromium Plated Wall Mixer With Provision For Overhead Shower With 115Mm Long Bend Pipe On Upper Side, Connecting Legs And Wall Flanges, Screwed Down High Pressure With Or Without Lettered Hot And Cold Screwed For Iron Pipe Complete All As Specified And Directed. , S&F, 5.50 Mm Thick Looking Mirror Of Selected Quality Glass, Size 60 Cm X 45 Cm, Mounted On 6Mm Thick Commercial Plywood And Fixed To Wooden Plug With C.P. Brass Screws And Cup Washers With & Including Plastic Fancy Frame Alround All As Directed. , Taking Down Chowkats Or Frames With Shutters (Without Taking Off Shutters From The Frame) Not Exc 1.5 Sqm Each.& Removing To Or From Store All As Specifed & Directed. , Taking Down Chowkats Or Frames Exc 1.5 Sqm But Not Exc 4 Sqm Each With Shutters (Without Taking Off Shutters From The Frame) Complete All As Specified And Directed. , M&L For Second Class Hard Wood Plain, Solid, Straight Chowkats And Frames, Wrought, Frame Rebated On The Solid, Rounded Or Chamfered, Put Together With Glue Pinned At Joints Complete All As Specified And Directed. , S&F Factory Made 35Mm Thick Plain Framed, Panelled Shutter (Two Panel) With Lock Rail And Panel Of 9 Mm B.W.P. Commercial Ply Or 12 Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 (Part I), Kiln Seasoned And Chemically Pressure Treated All As Specified , S & F 35 Mm Thick Second Class Hard Wood Glazed And Skeleton Shutters, Open Rebated And Prepared To Receive Glass, Gauze, Etc., Rs, Edges Of Framing Plain, Chamfered Complete All As Specified And Directed. , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/ Window/ Ceosetory Window & Other Frames/ Chowkhat Of Size 45 X 70 Mm Comprising Of Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wwod Powder/ Rick Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms ) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Stat Headed Ss Screws Having Minimum Frame Density Of 750 Kg/ Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modules Of Elasticity 900 N / Mm 2 And Resistance To Spread Of Flame Of Class A Catogory With Property Of Being Termite/ Borer Proof, Water / Moisture Proof And Fire Retardant And Fixed In Position With Ms Hold Fast/Lugs / Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In-Charge (M.S. Hold Fast/ Lugs Or Ss Dash Fasteners Shall Be Paid For Separately). , Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of 35 Mm Thick Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/ Cum And Screw Withdrwal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N Mm2 Modulus Of Elasticity 850 N / Mm2 And Resistance To Spread Of Flame Of Class A Catogary With Property Of Being Termite/ Borer Proof, Water/ Moisture Proof And Fire Retardanat And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk Ss Screws, All As Per Direction Of Engineer-In-Charge (Note:- Stainless Steel Butt Hinges And Necessary Ss Screws Shall Be Paid Separately. , S&F Aluminium Powder Coated Door With Shutter And Frame Of Aluminium Section Sliding Type As Per Following Specifications With And Including Round Type Aluminium Handle, Tower Bolts, Hinges, Panes Etc And As Directed At Site. Make Jindal Or Its Equivalent Approved Make:- (A) Door Frame : 100 X 44 X1.6 Mm Section For Complete Frame. (B) Door Shutter : Top & Bottom Rail Of 100X44x1.6 Mm, Middle Rail Of 83 X 44 X 1.6Mm, Both Styles Of 83 X 44 X 1.6 Mm Size Shall Be Used. (C) Glass Pane : 5Mm Thick Sun Broken Glass Fixed With Gasket With Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc. (D) Jointing Cleats, Glazing Clips, Rubber Packing, Anodized Aluminium Snap Beading, Screws, Anodized Aluminium Fittings Such As 100Mm Long 03 Nos. Hinges, Aluminium Handles , Aluminium Tower Bolts ,And Mortice Lock 6 Levers Etc Complete All As Specified And Directed , M&L For Taking Down Existing Aluminium Door Shutter Carefully Without Damage Of Glass Panesincluding Replacing Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc As Reqd At Site And Refixing The Same After Complete Repairs All As Specified And Directed ( Note- Any Replacement Of Aluminium Rails Or Stiles If Reqd To Be Replaced Will Be Measured Seperately ) , S&F In Repairs Double Action Floor Spring Hydraulicaly Regulated Made Up Of Minimum 1.25Mm Thick Aluminium Alloy Sheet Foundation Box Main Body With Stainless Steel Cover Governing Pivot Made Brass Other Parts Made Of Mild Steel Heavy Duty And Fixed Complete All Specified , S&F Aluminium Partition Powder Coated Of Frame Of Aluminium Section 44.45 X 44.45 X 1.6Mm Etc And 5 Mm Thick Sun Broken Glass Fixed With Gasket With Aluminium Clip , Jointing Clips, Glazing Clips, Rubber Packing, Screws Etc.And As Directed At Site. Make Jindal Or Its Equivalent Approved Make Including Taking Down Old Userviceable Wooden Partition Completeall As Spd , S&F 100Mm Size Ms Butt Hinges, Medium Weight, Cold Rolled And Fixed Complete All As Specified And Directed. , S&F 150Mm Long Aluminium Tower Bolt And Fixed Complete All As Specified And Directed. , S&F 125 Mm Size Aluminium Handle Plate Type Anodised Complete All As Specified And Directed. , S&F In Repairs Hydraulic Door Closer Aluminium ( Die Cast) Regulated Designation No-3 Universal Type For Door Shutter Complete All As Spd , Hacking Out Old Broken Glass (Any Thickness, Size, Quality Or Description) From Wooden/Metal Frames, Glazed With Putty Or Fixed With Beads Including Punching Or Drilling Out Old Glazing Pins/Spring Clips And Providing And Fixing New Ones All As Specified , S&F 3 Mm Thick Sheet Glass, Ordinary Quality And Glazing With Oil Putty In Square Not Exc 0.50 Sqm In Each Pane Complete All As Specified And Directed. , S&F In Repairs Of Galvanised Mild Steel Wire Cloth 0.45 Mm Nominal Dia Of Wire And Average Width Of Aperature 1.18Mm And Fixed With Tinned Tacks Or Galvanised Wire Staples Complete All As Specified And Directed. , M&L For Preparation Of New Or Previously Untreated Wooden Surfaces Of Any Description,Not Otherwise Described Over 10Cm Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed. , M&L For Plain Cement Concrete 1:3:6 Type C-1 (Using 20Mm Graded Stone Aggregate) As In Fixing Of Hold Fast, Bed Blocks Etc Including Necessary Form Work As Required Complete All As Specified And Directed. , Demolition And Breaking Up Drains Pipes(150Mm Size) Salt Glazed Ware, Ac Or Reinforced Concrete Set In Cement Mortar Complete All As Specified And Directed. , S&F 110Mm Bore Pvc (Swr) Pipes Single Socketed, In Any Length With Rubber Ring Joints, Fixed To Wall And In Floors Complete All As Specified And Directed , S&F Of 75 Mm Bore Pvc (Swr) Pipe Single Socketed In As Length With Rubber Ring As In Vent Pipe Complete All As Specified And Directed , S&F In Repairs Of 110 Mm Dia Pvc (Swr) Bend Complete All As Specified And Directed. , S&F In Repairs Of 75 Mm Dia Pvc (Swr) Bend Complete All As Specified And Directed. , S&F Brass Chromium Plated Tubular Towel Rail, 20 Mm Dia, D; Type, 60 Cm Long Between Flanges Complete All As Specified And Directed. , S&F Chromium Plated Soap Disk Fixed To Plug With Chormium Plated Brass Screws All As Specified And Directed , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified. , S&F Mild Steel Work As Hold Fasts, Bands, Straps, Supports Or Stays For Pipes Eaves Gutter Including Bolts If Required, Hooks (Stay), Clamps And Similar Small Articles, Conforming Tofe 310-0 Or Fe 410-0 Complete All As Specified And Directed. , Dismantling Wrought Iron Or Mild Steel Work Of Any Description Not Otherwise Provided For. , S&F Mild Steel Framed Work Such As Purlin , Truss, Square Tube , Ms Pole , Grating Etc With End Of Bars Shouldered And/ Or Riveted Or Forged Into Spikes, Framed Guard Bars, Barred Iron Doors, Ladders, Framed Balusters, Walk Ways, Railings, Welded Wire Mesh And Similar Work Confirming To Fe-290 Gde E-165 Complete All As Specified And Directed. , M&L For Preparation Of Old Or Previously Treated Wooden Surfaces Of Any Description,Not Otherwise Descri- Bed Over 10Cm Width Or Girth And Applying One Coats Of Synthetic Enamel Paint Complete All As Specified And Directed.. The Contractor Shall Make Necessary Arrangement Of Scaffolding And Ensure Safety Of Labours. , S& F In Repair Vitreous China Premium/ 1St Quality Wash Down Water Closet Wall Hung Ewc White/ Ivory/Off White (Closed Pattern Incl All Necessary Accessories Like Rag Bolts/ Gel Gasket Etc. (Excluding Flushing Cistern & Flush Pipe) Complete In All Respect All As Specified. , Health Faucet (Abs Body) Mild Steel Chromium Plated Suitable For 15 Mm Dia Pipe With 1.25 Metre Long Flexible Tube And Abs Wall Hook Including Making Connections And Fixed In Position Complete In All Respect As Specified , S & F 20Mm Dia Aluminium Alloy Anodised Curtain Rod Decorative Fency Type With Brackets Complete All As Specified.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 2
Uttarakhand View Result →
44.
Educational and Research Institute #11191269 AOC
Tender For Supply And Installation Of Furniture At Library And Computer Building. , Furniture , Library Chair -01 -Seat Size: 50.0Cm. (W) X 48.0 Cm. (D) -Back Size: 53.0 Cm. (W) X 39.0Cm. (H) -Injection Moulded Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ & Hardness 16 Kgf. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -M.S. Powder Coated Frames (Dft 50 Microns) For 4 Leg Chairs -M. S Pipe Dia 25Mm (Vendor To Submit Powder Coating Laboratory Test Certificate) -Glass Filled Polypropylene Armrest With The Tubular Frame. -Vendor Should Submit Detail Shop Drawings With All Dimensions. , Office Chair Seat Size- 53.5 Cm. (W) X 51.0 Cm. (D), Of 1.5 Cm Thickness Plywood Preferably Hot-Pressed, Furnished With Fabric Covers -Mesh Back Size- 51.0 Cm. (W) X 70.0 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Glass Filled Nylon Armrest With The Tubular Frame Of 6 Cm Hight(Adjustable) -Center Tilt Synchro Mechanism With Seat Slide & Multi Lock, Revolving 360° -Head Rest Sub-Assembly With Hight Adjustment Up To 4 Cm. -Pneumatic Height Adjustment Of 9.5Cm, Pedestal Assembly Of Polished Aluminium With Twin Wheel Injection Moulded Soft Castors Of Nylon With Pu Lining, Having Up To 6 Cm Wheel Diameter. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation Chair Seat Size- 53.5 Cm. (W) X 51.0 Cm. (D), Of Thickness 1.5 Cm Plywood Preferably Hot-Pressed, Furnished With Fabric Covers. -Mesh Back Size- 51.0 Cm. (W) X 70.0 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Glass Filled Nylon Armrest With The Tubular Frame Of 6 Cm Hight(Adjustable) -Center Tilt Synchro Mechanism With Seat Slide & Multi Lock, Revolving 360° Anti-Shock Mechanism. -Pneumatic Height Adjustment Of 9.5Cm, Pedestal Assembly Of Polished Aluminium With Twin Wheel Injection Moulded Soft Castors Of Nylon With Pu Lining, Having 6 Cm Wheel Diameter. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Chair Seat Size: 49.0 Cm. (W) X 51.4 Cm. (D) Of Thickness 1.2 Cm Plywood Preferably Hot-Pressed, Furnished With Synthetic Leather Over Moulded High Resilience Polyurethane Foam. -Mid Back Size: 51.6 Cm. (W) X 65.7 Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 55 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Chrome Plated Up-Down Adjustment Armrest Of 8 Steps. -360° Revolving Type Front Pivot Synchro Mechanism, 4-Position Locking With Anti-Shock Feature, Tilting Ratio Of 1:2, Single Point Control. -Back Height Adjustability, Adjusted In 5 Positions. -Pneumatic Height Adjustment Of 10Cm, Pedestal Assembly (Pedestal- 65 Cm, Pitch-Center Dia. 75Cm) Of Polished Aluminium With Twin Wheel Injection Moulded Castors. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Study Chair With Writing Pad Seat Size : 50.0Cm. (W) X 48.0 Cm. (D) Furnished With Fabric Covers And Moulded Polyurethane Foam -Back Size : 53.0 Cm. (W) X 39.0Cm. (H) -Seat With High Resilience Polyurethane Seat Foam With Density 45 Kg/M³ And Hardness 16 Kgf (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -M.S. Powder Coated Frames Dia 25Mm (Dft 50 Microns) For 4 Leg Chairs With Glass Filled Polypropylene Shoe (Vendor To Submit Powder Coating Laboratory Test Certificate) -The Full Desklet Made Of 1.3 Cm. Thick, Compact Laminate Board. Having Front And Back Adjustment Of 4 Cm -Outer Dimension 59.5±0.1Cm. (W) X 29.0±0.1Cm -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Table With Seating Capacity Of 18Seats 2 Str Main - 1350 X 600 X 740 - 2 Nos. -2 Str Shared - 1350 X 600 X 740 - 2 Nos. -2350W - 2350 X 850 X 740 - 2 Nos. -Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board With A High-Quality Wood Matching 2 Mm Thick Pvc Lipping; Plastic Access Flap Is Provided For Easy Access To Wires And Cables -Under Structure Consists Of 18Mm Thick Pre-Laminated Twin Board Wood Matching 2 Mm Thick Pvc Lipping -Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of Wood Matching 2 Mm Thick Pvc Lipping -Powder Coated Accent Metal Strip Provided Below Work Surface Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent Steel, Epoxy Polyester Powder Coated (Dft 40-60 Microns). (Vendor To Submit Powder Coating Laboratory Test Certificate) -Wire Management- An Array Of Panels Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables. Provision To Mount 6 Module Electric Switch Plate Is Provided Below Worktop. Cut-Out On Top With Two-Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Conference Table With Seating Capacity Of 30 Seats 2 Str Main - 1350 X 600 X 740 - 2 Nos. -2 Str Shared - 1350 X 600 X 740 - 8 Nos. - 2Str -2350 X 850 X 740 - 2 Nos. -Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board With Wood Matching 2 Mm Thick Pvc Lipping; Plastic Access Flap Is Provided For Easy Access To Wires And Cables -Under Structure Consists Of 18Mm Thick Pre-Laminated Twin Board Of High-Quality Wood Matching 2 Mm Thick Pvc Lipping -Modesty Panel-Made Of 18Mm Thick Pre-Laminated Twin Board Of High-Quality Wood Matching 2 Mm Thick Pvc Lipping -Powder Coated Accent Metal Strip Provided Below Work Surface Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent Steel, Epoxy Polyester Powder Coated (Dft 40-60 Microns). (Vendor To Submit Powder Coating Laboratory Test Certificate) -Wire Management- An Array Of Panels Made Of 0.8Mm Crca Or Equivalent Grade Steel Or Equivalent, Epoxy Polyester Powder Coated (Dft 40-60 Microns) Is Used For Flow Of Wires And Cables. Provision To Mount 6 Module Electric Switch Plate Is Provided Below Worktop. Cut-Out On Top With Two-Piece Injection Moulded Plastic Part Polymer Component Is Fitted To Pull Out Audio, Video Cables Onto Worktop And Connect Devices Charger To Power Socket Below Worktop. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Two-Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette.(Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Leg Assembly Is A Welded Assembly Made In Stainless Steel Tube & Plate With Plastic Endcap Of 146 X 90 X 85.5 Cm With Seat Height Of 45 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Three-Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layer Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) O Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 206 X 90 X 85 Cm Seat Height 45Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , One Seater Sofa Seat Is Made Up Of Pu Foam In Density 28 Kg/Cu.Mtr With An Additional Top Layer Of Super Soft Pu Foam Furnished With Fabric Or Leatherette. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Back Is Made Up Of Pu Foam In Density 28 Kg/Cu. Mtr With Two Additional Top Layers Of Super Soft Foam Furnished With Fabric Or Leatherette. -Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) Or Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 86 X 90 X 85 Cm Seat Height 45Cm. -Vendor Should Submit Detail Shop Drawing With All Dimensions. Under Structure Is Made Up Of 1.2 Cm. Thick Hot-Pressed Plywood With Moisture Resistance & Termite Proof. -6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Under Structure For Cushioning Purpose. -Stainless Steel (Grade Ss 202) O Equivalent Grade Tube Welded Leg Assembly With Plastic Endcap Of 86 X 90 X 85 Cm Seat Height 45Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Mobile Compactor Storage Unit-01 3 Bay Drive Type Compactors With 3 Bay Sd - 1 No, 3 Bay Td - 1 No, 3 Bay Sl - 1 No. 3 -Size Of Compactor 2361H Mm X 915 W Mm X 457D Mm, 3 Bay Channel 2400 Mm - 3 No, 3 Bay Channel 800 Mm - 3 No. -Main Body: Rigid Knock Down Construction Made Of 0.8 Mm Thick. Crca Or Equivalent Grade Steel Having 5 Loading Levels Formed By 4 Adjustable Shelves For 1980 Mm Height Body And 6 Loading Levels With 5 Adjustable Shelves For 2361Mm Height Body. -Main Body Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction: Rigid Knock Down Construction Made Of 0.8 Thick Crca Or Equivalent Grade Steel. Each Body Block Consists Of 1 Main Unit & Then Add-On Units. -Front Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Panel Made Of 0.6 Thick Crca Or Equivalent Grade Steel Fixed Together Using Machine Screws To Prevent Access To Inside Files From The Outside. -Door Frame Made Of 0.8 Thick Crca Or Equivalent Grade Steel Of 2 Vertical Door Stiffeners Providing Rigidity To The Entire Body. -Shelf Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction 12-Bend Panel Made Of 0.7 Thick Crca Or Equivalent Grade Steel Having Max Load Bearing Capacity Is 100 Kg Uniformly Distributed Per Shelf, Height Of 351Mm Between Two Shelves. The Last Loading Level For Shelf Is 1721Mm From Ground Level For 1980H Body And 2107Mm From Ground For 2361H Body. Shelves Are Mounted On Support Brackets & Shelf Level Can Be Adjusted At Approx. 25.4 Pitches. There Are 4 Adjustable Shelves Per Body For 1980H And 5 Adjustable Shelves Per Body For 2361H, Giving 5 And 6 Loading Levels For 1980H And 2361H Body Respectively. -Storage Capacity Made Of 0.8Thick Crca Or Equivalent Grade Steel Having Hinged Door Have Recessed Die Cast Handle Cum Lock With 3 Way Locking Through A Lever & Shooting Bolt And Can Hold Up To 10 Nos. Of Box Files -Under Structure Construction Welded Frame Suitably Fabricated To Bear The Loads Based On Configuration Consists Of The Main Channel, Body-Fixing Channel, U-Channel, And Z-Channel Made Of Hr Sheet 3 Mm Thick. -Under Structure Construction Finish Epoxy Polyester Powder Coat Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Movements Of The System Is Drive Type Configuration Achieved By Rotating A Pu Hand Wheel Connected To The Rollers Through A ‘Sprocket-Chain Arrangement Mounted On The Side Of The Body Covered By A 1 Mm Thick Crca Or Equivalent Grade Steel Sheet Drive Unit Cover With Dimensions 1202Mm X 398Mm X 87Mm -Rail Channels- A ‘C Section 3 Mm Thick Hr Sheet On Which Rail Ms Bright Bar Of Sq 25.4Mm Is Firmly Fixed From Bottom Using Counter Sunk Screws. The Rail Channels Are Of 3 Lengths I.E., 800Mm, 1600Mm And 2400Mm. Label Holder Is An Aluminium Extrusion Of Length 453Mm For Ld/Sd And 910Mm For Td, Fitted On To Front Cover Of Body. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Mobile Compactor Storage Unit -02 3 Bay Drive Type Compactors With 3 Bay Sd - 1 No, 3 Bay Td - 2 No, 3 Bay Sl - 1 No. -Size Of Compactor 2361H Mm X 915 W Mm X 457D Mm, 3 Bay Channel 2400 Mm - 1 No, 3 Bay Channel 800 Mm - 1 No. -Main Body : Rigid Knock Down Construction Made Of 0.8 Thick. Crca Or Equivalent Grade Steel Having 5 Loading Levels Formed By 4 Adjustable Shelves For 1980 Mm Height Body And 6 Loading Levels With 5 Adjustable Shelves For 2361Mm Height Body. -Main Body Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction: Rigid Knock Down Construction Made Of 0.8 Thick Crca Or Equivalent Grade Steel. Each Body Block Consists Of 1 Main Unit & Then Add-On Units. -Front Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose -Back Cover Made Of 0.8 Thick Crca Or Equivalent Grade Steel Which The Handles Drive Unit Having Holes On The Front Surface For Ventilation Purpose. -Back Panel Made Of 0.6 Thick Crca Or Equivalent Grade Steel Fixed Together Using Machine Screws To Prevent Access To Inside Files From The Outside -Door Frame Made Of 0.8 Thick Crca Or Equivalent Grade Steel Of 2 Vertical Door Stiffeners Providing Rigidity To The Entire Body -Shelf Finish: Antirust Surface Treatment Coated With Epoxy Polyester Powder Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Shelf Construction 12-Bend Panel Made Of 0.7 Thick Crca Or Equivalent Grade Steel Having Max Load Bearing Capacity Is 100 Kg Uniformly Distributed Per Shelf, Height Of 351Mm Between Two Shelves. The Last Loading Level For Shelf Is 1721Mm From Ground Level For 1980H Body And 2107Mm From Ground For 2361H Body. Shelves Are Mounted On Support Brackets & Shelf Level Can Be Adjusted At Approx. 25.4 Pitches. There Are 4 Adjustable Shelves Per Body For 1980H And 5 Adjustable Shelves Per Body For 2361H, Giving 5 And 6 Loading Levels For 1980H And 2361H Body Respectively. -Storage Capacity Made Of 0.8Thick Crca Or Equivalent Grade Steel Having Hinged Door Have Recessed Die Cast Handle Cum Lock With 3 Way Locking Through A Lever & Shooting Bolt And Can Hold Up To 10 Nos. Of Box Files -Under Structure Construction Welded Frame Suitably Fabricated To Bear The Loads Based On Configuration Consists Of The Main Channel, Body-Fixing Channel, U-Channel, And Z-Channel Made Of Hr Sheet 3 Mm Thick. -Under Structure Construction Finish Epoxy Polyester Powder Coat Of Approved Colour & Shade With A Dry Film Thickness Of Minimum 40 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Movements Of The System Is Drive Type Configuration Achieved By Rotating A Pu Hand Wheel Connected To The Rollers Through A ‘Sprocket-Chain Arrangement Mounted On The Side Of The Body Covered By A 1 Mm Thick Crca Or Equivalent Grade Steel Sheet Drive Unit Cover With Dimensions 1202Mm X 398Mm X 87Mm -Rail Channels- A ‘C Section 3 Mm Thick Hr Sheet On Which Rail Ms Bright Bar Of Sq 25.4Mm Is Firmly Fixed From Bottom Using Counter Sunk Screws. The Rail Channels Are Of 3 Lengths I.E., 800Mm, 1600Mm And 2400Mm. Label Holder Is An Aluminium Extrusion Of Length 453Mm For Ld/Sd And 910Mm For Td, Fitted On To Front Cover Of Body. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Magazine Stand Overall Dimensions 900Mm(W)X450Mm(D)X1830Mm(H). -Steel Periodical Display Rack Providing, Placing And Supplying Of Display Rack. -Rigid Knockdown Construction, Panels Shall Be Made From Crca Or Equivalent Grade Steel 0.6 Mm Thick -Front Frame Shall Be Made From Crca Or Equivalent Grade Steel 0.8 Mm Thick. Crca Or Equivalent Grade Steel D Grade. -There Shall Be 5 Level Racks, Suitable For Full Cape Size Magazines, Periodicals, Aesthetically Appealing Metal Tray At An Angle For Easy Viewing. -Receding Facility To Access The Storage Behind. -Uniformly Distributed Load Capacity Per Each Shelf Is 40 Kg. -Shall Be Epoxy Polyester Powder Coated To The Thickness Of 50 Microns. (Vendor To Submit Powder Coating Laboratory Test Certificate) Vendor Should Submit Detail Shop Drawing With All Dimensions. , Storage Cabinet 1 Body Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edge Band. The Shelves Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Back Panel Is 9Mm White Plt Assembled With Suitable Fittings. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. -Doors Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Centre Of The Door Having Suitable Hinges And Hdu Is Fitted With Height Adjustment And Has A Three-Point Lock. -All The Storages Are Fitted With A 6 Mm Leveller At Bottom For Levelling As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Storage Cabinet -02 Body Made From 18Mm Plb With All The Edges Sealed With 0.8 Mm Thick Pvc Edge Band. The Shelves Is Made From 18 Mm White Plt And Edges Are Sealed With 0.8 Mm Edge Band. The Back Panel Is 9Mm White Plt Assembled With Suitable Fittings. The Bottom Shelf Is Fixed And Other Shelves Have One Step Adjustment For Optimizing The Space. -Doors Made From 18 Mm Plb With 2 Mm Edge Band On All Edges Ad A Flush Plastic Handle Is Fitted Vertically At The Centre Of The Door Having Suitable Hinges And Hdu Is Fitted With Height Adjustment And Has A Three-Point Lock. -All The Storages Are Fitted With A 6 Mm Leveller At Bottom For Levelling As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Library Table 1 1650 X 600 Desk Based Modular Workstation With System Ht-750 Mm. -Partial Screens: Fabric T- Mould, 19Mm Thick Screen Of 450Mm Ht., Mounted On Studs. -Legs: Providing Metal Powder Coated Cube Leg Vertical (40X40Mm)& Rigid Support (50X30Mm). Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Understructure Comprising Of Metal Powder Coated Cross, Made Up Of Metal Powder Coated Finish -Wire Management: Electric Switch Plate Of 8+3 Module For Power And Data Points. -Worksurface - 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 1650 Mm W X 600 Mm D. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Library Table -2 2400 X 1200 Providing And Placing Modular Workstation Desk Based Modular Workstation With System Ht - 750 Mm. -Legs: Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Understructure Comprising Of Metal Powder Coated Cross, Made Up Of Metal Powder Coated Finish -Wire Management: Electric Switch Plate Of 8+3 Module For Power And Data Points. -Worksurface - 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 2400 Mm W X 1200 Mm D. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Reception Table Work Surface Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade Confirming To Edge Banded With Matching 2 Mm Thick Pvc Lipping. -Wire Managementu-Access Flap Along With A Grommet Is Provided On Work Surface For Wire Management. Power Box Made With 0.8 Mm Thick Crca Or Equivalent Grade Steel, With Electric Switch Plate Of 8+3 Module Which Is Fixed With Worktop Along The Width Ataccess Flap Position. Wire Riser Made Of 0.8Mm Crca Or Equivalent Grade Steel Is Provided For Proper Wire Management. -Modesty Panel & Side Skirting - Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping. -Under Structure And Top Shelf - Made Of 18 Mm Thick Pre-Laminated Twin Board Of High-Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping - Hinge Door + Drawer Unit - Made Of 18Mm Thick Pre-Laminated Twin Board Of High Quality Wood And Approved Shade, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Bottom Is Made Of 5.5Thick Mdf Whiteboard Handle Is Provided For Ease Of Opening. Hdu And Drawer Are Provided With Cam Lock For Security. -Organizer Plate Made Of 1.2Mm Crca Or Equivalent Grade Steel Is Provided For Magnetic Sticky Notes. -Bag Hanger Hook Made Of 1.2Mm Crca Or Equivalent Grade Steel Is Provided For Bag Hanging 2400 X 1770 X 870 Mm , Side Table Providing, Supplying And Placing Of Side Table. -Side Table Glass Is 10 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade Or Equivalent For Facing With Under Structure. -Under Structure Is A Welded Assembly Made In Ss202 Or Equivalent Grade -Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions , Central Table Providing, Supplying And Placing Of Coffee Table. -Center Table Glass Is 10 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Or Equivalent Grade For Facing With Under Structure. -Under Structure Is A Welded Assembly Made In Ss202 Grade Or Equivalent -Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. Vendor Should Submit Detail Shop Drawing With All Dimensions , Round Table Circular 900Mm Providing And Placing Meeting Tables With Worktop Height - 750 Mm. Cube Legs Vertical (40X40Mm).Rigid Support-(50X30Mm) Are Available For Work Top Level 750 Mm From Base. -Worktop Is 25Mm Thick Prelaminated Particle Board With Pvc Lipping As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Table A- 750X1500 Providing And Placing Desk Based Modular Workstation With System Height - 750 Mm. -Legs Providing Metal Powder Coated Cube Leg Vertical (40X40Mm) Rigid Support (50X30Mm). Legs Are For Standard Workstation Height Of 750Mm. All Legs Have Levelling Screws For Adjustment In Case Of Uneven Floor. -Under Structure Made Up Of Metal Powder Coated Finish And The Entire Assembly Are Fixed To The Worktop. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. . (Vendor To Submit Powder Coating Laboratory Test Certificate) -Metal Modesty And Wooden Modesty Are Mounted On The Worktop Perforated With The Help Of The Modesty Mounting Brackets At 400 Mm From Ground. -Worksurface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500X 750 Mm For Main Table As Per Order. Vendor Should Submit Detail Shop Drawing With All Dimensions , Meeting Table Eight-Seater 2350 X 1150 Mm Work Top Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood; Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. -Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of High-Quality Wood; Edge Banded With Matching 2 Mm Thick Pvc Lipping. Access Panels Provided With Soft Closing Hinges. Aluminium Alloy 63400 Or Equivalent - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. Beside Each Cut-Out, An Additional Cut-Out With Plate Is Provided For Mounting Audio-Visual Cables (E.G. Hdmi, Vga-A, Etc.) Vendor Should Submit Detail Shop Drawing With All Dimensions , Table B Supplying And Placing In Position Main Table, Of Dimension 1800X2100X750 Mm. -Primary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc. -Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc. -Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of High Quality Wood, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood, Edge Banded With Matching 2 Mm Thick Pvc Lipping.  Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board With 0.4Mm Pvc Membrane Pressed On To Top. Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Modular, Space-Optimizing Desk With Bench N (Three-Seater Curved) Providing, Supplying And Placing Of Desk Cum Bench N Seater Product Which Provides An Elegant, Modular Solution With 360-Degree Swivel Seat For Easy Entry/Exit And Height-Adjustable -Legs Are Made Of Ms Erw Or Equivalent Tube Section Of Size 75X25X2 Mm Thick Oval Tube With 5 Mm Thick Hr Bracket Sand 2Mm Thick Crca Or Equivalent Grade Steel Brackets On To The Tubes. -Assembly Is Powder Coated With Epoxy Polyester. Leg Height Varies From 705 To 1005 In Pitch Of 50 As Per Layout. Sturdy Anchoring By Anchor Bolts On To Base Of 8Mm Thick Plate For Proper Resting Of Leg. Shoe Made Of Nylon Are Provided At The Bottom For Covering The Base Plate. -Two Side Clads Made Of E18 Mm Thick Plate With 0.8Mm Thick Pvc Lapping And On The Outside Covered With Welded Metal Structure Made Of 2 Mm Thick Crca Or Equivalent Grade Steel Powder Coated With Epoxy Polyester. -Worktop Are Made Of 25 Mm Thick Pre-Laminated Board Of High-Quality Wood; All The Edge Of Work Surface Should Provide With Machine Pressed 2 Mm Thick Pvc Edge Band Glued With Hot Melt Glue. -Seat Has Self-Closing Mechanism. Seat Under Structure Is Made From Combination Of Welded Fabricated Structure Of 5Mm Thick Hr And 8Mm Thick Ply With Moulded Pu Foam Of Density 55 Kg/Cu.Mtr. With Stitched Fabric Made Of Leatherette Or Foam Back Fabric. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Seat Back Is Made From Combination Of 8Mm Thick Ply With Moulded Foam On Top Which In Turn Is Covered With Stitched Upholstery Made Leatherite As Per Or Foam Back Fabric. (Vendor To Submit Foam Density And Hardness Laboratory Test Certificate) -Seat Support Frame Is Made From Combination Of Ms Erw Or Equivalent Grade Tube Section Of Size 80X40X2.5 Mm Thick Rectangular Tube And Ms Erw Tube Section Of Size 48X19.1X2 Mm Thick Oval Tube Welded Together. Assembly Is Powder Coated With Epoxy Polyester. -Modesty Is Made Of 25Mm Thick Pre-Laminated Twin Board Of High-Quality Wood, All The Edge Of Modesty Are Provided With Machine Pressed 2 Mm Thick Pvc Edge Band Glue With Hot Melt Glue. Vendor Should Submit Detail Shop Drawing With All Dimensions . , Table C 1650X600X770Mm Providing, Supplying And Placing Of Conference Table With Product Size 1650 X 600 X 770Mm -Worktop Should Be Made Of 25Mm Thick High-Quality Wood, Edges Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. -All Tables Are Provided With Heavy Duty Table Connector Made With Metal Integrated Engineering Plastic. -Modesty Should Be Made Of 15Mm High Quality Wood, Edges Shall Be Provided With Machine Pressed 2 Mm Thick Pvc Lipping Glued With Hot Melt Eva Glue. -Recta Table Modesty Is Provided With A Latch Made Of 2Mm Thick Crca Or Equivalent Grade Steel And Is Powder Coated With Min 45-Micron Thickness Of Epoxy Polyester Coating. Latch Is Fixed With Knurled Bush Made Of 20Mm Dia Ms Rod In A Black Finish. Latch Can Be Used To Align Modesty If Two Or More Recta Tables Are Connected Side By Side. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Modesty Is Provided With Rubber Stopper Made Of Tpe Rubber To Reduce Banging While Folding Table. -Legs Should Be Made By Welding The Combination Of Ms Erw Or Equivalent Grade Round Tube Ø63.5 X 2Mm Thick, Flanges Made Crca Or Equivalent Grade Steel Sheet Of 1.6Mm Thick And 1.2Mm Thick Inside Plates Made Of Hr 5Mm Thick Sheet. Assembly Is Epoxy Polyester Powder Coated (Min 45 Micron). -Legs Are Provided With Casters Of Ø65 Mm Lockable Type For Ease Of Movement And Can Be Locked When Required At Any Position. Each Castor Is Also Provided With 2 Knurled Disk Of 50Mm Dia And 5 Mm Thick Made Of Ms Bar With Zn Black Finish For Levelling Adjustment Of 10Mm.. -Table Top Connected With Spring Loaded Mechanism With Pull Handle Made Of Ms Erw Ø16X1.2Mm Thick With An Insert Tube Of Ø12.7X1.6Mm Thick Tube. Coated With Epoxy Polyester Powder Coated (Min 45 Micron) To Operate Table Top. (Vendor To Submit Powder Coating Laboratory Test Certificate) -Table Top With Modesty Folds Upside At Offset Centre Pivot Provided On Support Bracket Which Is Aluminium Alloy Pressure Die Cast Part Coated With Epoxy Polyester Powder Coat (Min 45 Micron). Modesty Is Connected To Worktop With 90 Deg Rotating Hinge Made Of Engineering Plastic. -All Type Of Tables Are Provided With Power Box Which Has Two Universal Power Socket Of 2 Annual Periodical Maintenance Each, One Switch Of16 Annual Periodical Maintenance And 1 Fuse Of 4 Annual Periodical Maintenance With 1000Mm Cable With Male And Female Gst Connector. -All Tables Are Provided With Wire Channel And Wire Clip Made Of 1.2Mm Thick Spring Steel And Is Powder Coated With Min 45 Micron Thickness Of Epoxy Polyester Coating (Vendor To Submit Powder Coating Laboratory Test Certificate) Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation L Type Providing And Placing Desk Based Modular Workstation With System Height - 1200 Mm. -Partial Screens: Fabric T- Mould, 19Mm Thick Screen Of 450Mm Ht., Mounted On Studs. -Legs Providing Metal Powder Coated Cube Leg. Legs Are For Standard Workstation Height Of 750Mm. -Under Structure Made Up Of Metal Powder Coated Finish And The Entire Assembly Is Fixed To The Worktop. -Wire Management Will Be Provided With Electric Switch Plate Of 8+3 Module, Considered For Power And Data Points. -Worksurface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 1500X1500X600 Mm. -Metal And Wooden Modesty Are Mounted On The Worktop With The Help Of The Modesty Mounting Brackets. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390W X 435D X 646Ht, 1Dr = 1 Box + 1 File, Central Locking. Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation 2 -900X600Mm Providing And Placing High-Functionality, Modular Office Workstation System & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thick And Ht - 1200 Including Powder Coated Aluminium Trims. -Fin Are 22.5 Mm Thick Panel Which Are 18 Mm Thick Ply Boards Wrapped With Fabric At Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. -Wire Management: Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Up To The Panels Through Concealed Conduits Inside The Blocks. -Half Screen With Frame At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Finish. -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor -Work Surface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 900 Mm W1 X600 Mm D As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Workstation 3- 900X600Mm Providing And Placing High-Functionality, Modular Office Workstation System & Tile Based Modular Workstation, With Partition Thickness As 52.4 Mm Thick And Ht - 1050Mm Including Powder Coated Aluminium Trims. -Fin Are 22.5 Mm Thick Panel Which Are 18 Mm Thick Ply Boards Wrapped With Fabric At Intermediate Level. Bottom Block Is Finished In Metal Finish. -Wire Management: Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Up To The Panels Through Concealed Conduits Inside The Blocks. -Half Screen With Frame At Intermediate Position Between 2 People And At The End Above Worktop In Fabric Finish. -Metal Powder Coated Legs At The End And Shared Condition. System Shall Also Have 120 Mm High Powder Coated Standalone Panel Legs To Give The System An Elevated Look. All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor -Work Surface Of 25 Mm Thick Prelaminated Particle Board With Flat Pvc Lapping Edge Banding Of Size 900 Mm W1 X600 Mm D As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions. , Main Table 1650 X 750, Eru- 1200W X 450D With Pedestal Modular Desk-Based System Of Height 750 Mm. -Cube Legs Are Fabricated By Argo Shield & Have A Square Section. Cube Legs(40X40Mm) And Rigid Support (50X30Mm) Are Available For Work Top Level 750 Mm From Base. -Wire Management: Single Power Box With Raiser For Manager Modules, Single Tables (8+3 Anchor Roma). Soft Closing Access Flap With Brush. -Metal Modesty Is Made From 0.8 Mm Thick Crca Or Equivalent Grade Steel. Metal Modesty Is Mounted On The Worktop With The Help Of The Modesty Mounting Brackets. -Worktop Of 25Mm Thick Prelaminated Particle Board With Pvc Lapping. -Nova Free Standing Pedestal With Flat Metal Front Of Size 390X435X646 Mm, 1Dr = 1 Box + 1 File, Central Locking. Vendor Should Submit Detail Shop Drawing With All Dimensions , Modular, Space-Optimizing Desk Legs Are Made Of Ms Erw Or Equivalent Grade Tube Section Of Size 75X25X2 Mm Thick Oval Tube With 5 Mm Thick Hr Brackets And 2Mm Thick Crca Or Equivalent Grade Steel Brackets Welded On To The Tubes. Assembly Is Powder Coated With Epoxy Polyester. Leg Height Varies From 705 To 1005 In Pitch Of 50 As Per Layout. Sturdy Anchoring By Anchor Bolts On To Base Of 8Mm Thick Plate For Proper Resting Of Leg. -Shoe Made Of Nylon Are Provided At The Bottom For Covering The Base Plate. -Two Side Clads Made Of 18 Mm Thick Plate With 0.8Mm Thick Pvc Lapping And On The Outside Covered With Welded Metal Structure Made Of 2 Mm Thick Crca Or Equivalent Grade Steel Powder Coated With Epoxy Polyester. -Worktop Are Made Of 25 Mm Thick Pre-Laminated Board Of El-P2 Grade And Approved Shade. All The Edge Of Work Surface Are Provided With Machine Pressed 2Mm Thick Pvc Edge Band Glued With Hot Melt Glue. -Modesty Is Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade. All The Edge Of Modesty Are Provided With Machine Pressed 2 Mm Thick Pvc Edge Band Glue With Hot Melt Glue As Per Order. -Vendor Should Submit Detail Shop Drawing With All Dimensions.
Contract Date: Jun 06, 2026 Contract Value : 6.64 Crore
Government Departments No of Bidders 8
Maharashtra View Result →
45.
Health and Family Welfare #11180771 Price Bid
Tender For Supply Of Drugs And Medicines- 1 Drugs And Consumables 2 Oxygen (Medicinal Gas) Inhalation 3 Oxygen(Medicinal Gas) Inhalation Should Be Certified For Medical Use Contains Not Less Than 99% V/V Of Oxygen, Contains Not More Than 5Ppm V/V Of Carbanmonooxide, Contains Not More Then 30Ppm V/V Of Carban Dioxide Should Be Free Of Halogens, Oxidising Substances & Water. 4 Halothane Inhalation 250 Ml Bottle 5 Ketamine (As Hydrochloride) Injection 50 Mg /Ml,10 Ml Vial 6 Nitrous Oxide Inhalation 7 Thiopentone Injection Powder 0.5 G 8 Propofol Injection 1% Vial (10 Mg/Ml , 10 Ml Vial) 9 Isoflurane Inhalation 100 Ml Vial 10 Sevoflurane Inhalation 250 Ml 11 Bupivacaine Injection 0.5%, 5Ml Amp. 12 Bupivaccine Heavy 5 Mg With Dextrose Monohydrate 80 Mg/Ml Injection 4 Ml Ampoule 13 Lignocaine Injection 2%, 30 Ml Vial 14 Lignocaine Jelly 2% W/V ( With Seprate Nosal), 30Gm Tube 15 Lignocaine Hydrochloride And Adrenaline Bitartarate Injection 20Mg/Ml And 0.01Mg/Ml Adrenaline, 30 Ml Vial 16 Atropine Injection 0.6 Mg/Ml, 1 Ml Ampoule 17 Glycopyrolate Injection 0.2 Mg/Ml, 1 Ml Ampoule 18 Diazepam Injection 5 Mg/Ml, 2 Ml Ampoule 19 Diazepam Tablet 5 Mg 20 Midazolam Injection 1 Mg/Ml, 5 Ml Vial 21 Midazolam Nasal Spray 1.25 Mg/Spray 22 Diclofenac Supositories 50 Mg 23 Diclofenac Sodium Gastro-Resistant Tablet 50 Mg 24 Diclofenac (Sodium) Injection 25 Mg/Ml ,3Ml Amp. 25 Diclofenac Gel 1%, 30 Gm Tube 26 Diclofenac + Paracetamol Tablet 50Mg+325Mg 27 Ibuprofen Tablet 200Mg 28 Ibuprofen Tablet 400 Mg 29 Ibuprofen Suspension 100 Mg/5 Ml. 60 Ml Bottle 30 Paracetamol Tablet 500 Mg 31 Paracetamol Injection 150 Mg/Ml, 2 Ml Amp. 32 Paracetamol Peaditric 125Mg/5Ml 60 Ml Bottle 33 Paracetamol Paediatric Oral Suspension 150Mg/Ml, 10 Ml Vial With Marked Dropper 34 Paracetamol Infusion 100 Mg/10 Ml, 100 Ml Bottle Ffs Technology - 35 Aceclofenac Tablet 100 Mg 36 Etoricoxilb Tablet 90 Mg 37 Morphine Injection 10 Mg/Ml, 1 Ml Ampoule 38 Morphine Tablet 20 Mg 39 Tramadol Capsule 50 Mg 40 Tramadol Injection 50 Mg/Ml, 2 Ml Ampoule 41 Tramadol Hydrochloride Capsule 100 Mg 42 Pentazocine Injection 30 Mg/ Ml, 1 Ml Ampoule 43 Fentanyl Injection 50 Mcg/Ml, 2Ml Ampoule 44 Pethidine Injection 50 Mg/Ml, 1Ml Ampoule 45 Thiocolchicoside Capsule 4 Mg 46 Midazolam Nasal Spray 1.25 Mg/Spray 47 Beclofen Tablet 10 Mg Tablet 48 Allopurinol Tablet 100 Mg 49 Sulfasalazine Tablet 500 Mg 50 Methotrexate Tablet 2.5 Mg 51 Methotrexate Tablet 5 Mg 52 Naxproxen (500Mg)+ Domperidone (10Mg) Tablet 53 Diacerein 50 Mg + Glucosamine Sulphate 750 Mg Tablet - 54 Cetrizine Syrup 5 Mg/5Ml, 60 Ml 55 Chlorpheniramine Tablet 4 Mg 56 Pheniramine Maleate Injection 22.75 Mg/Ml, 2 Ml 57 Hydroxyzine Tablet 10 Mg 58 Dexamethasone Tablet 0.5 Mg 59 Dexamethasone Injection 4Mg/Ml, 2 Ml Ampoule 60 Hydrocortisone ( Sodium Sucinate Powder) Injection 100 Mg Vial, With 2 Ml Distilled Water For Reconstitution 61 Prednisolone Tablet 10 Mg 62 Prednisolone Tablet 20 Mg 63 Methyl Prednisolone Injection 1Gm, 1 Gm Vial With Diluent 64 Adrenaline Injection 1 Mg/Ml, 1:1000, 1 Ml Amp 65 Levocetrizine Tablet 5 Mg 66 Nor Adernaline Injection 4Mg/Ml 67 Cyproheptadine Tablet 4 Mg 68 Monteleukast Tablet 5 Mg 69 Methyl Prednisolone Tablet 8 Mg 70 Antisnake Venom ( Dry Powder For Polyvalent Solution) Injection Vial With 10 Ml Diluent 71 Calcium Gluconate Injection 100 Mg/Ml, 10 Ml Amp 72 Naloxone Injection 400 Mcg/Ml, 1Ml Ampoule 73 Pralidoxime (Pam) Injection 1 Gm Vial 74 Activated Charcoal Tablet 500 Mg 75 Carbamazepine Tablet 200 Mg 76 Carbamazepine Tablet 400 Mg 77 Carbamazepine Oral Solution 100Mg/5Ml, 30 Ml Bottle 78 Lorazepam Tablet 1 Mg 79 Lorazepam Tablet 2 Mg 80 Lorazepam Injection 4Mg, 2Ml 81 Magnesium Sulphate Injection 1 Gm /2Ml (50%W/V), 2 Ml Ampoule 82 Magnesium Sulphate Injection 2.5 Gm /5Ml(50%W/V), 5 Ml Ampoule 83 Phenobarbitone Tablet 30 Mg 84 Phenobarbitone Tablet 60 Mg 85 Phenobarbitone Injection 200 Mg/ Ml 86 Phenobarbitone Oral Solution 20 Mg/ 5 Ml,60 Ml Bottle 87 Phenytoin Tablet 100 Mg 88 Phenytoin Tablet 300 Mg 89 Phenytoin Oral Solution 25 Mg/Ml, 100 Ml Glass Bottle 90 Phenytoin (Sodium) Injection 100Mg, 2Ml Amp. 91 Sodium Valproate/Valproic Acid Enteric Coated Tablet 200 Mg 92 Sodium Valproate/Valproic Acid Enteric Coated Tablet 500 Mg 93 Sodium Valproate/Valproic Acid (Sodium)Controlled Released Tablet 300 Mg 94 Sodium Valproate Injection 100 Mg/Ml 95 Sodium Valproate Suspension 200 Mg/5 Ml, 100 Ml 96 Clobazam Capsule 10 Mg 97 Divalproex Sodium Tablet 500 Mg 98 Levetiracetam Tablet 500 Mg 99 Toperamate Tablet 50 Mg 100 Injection Levetricatum 100 Mg, 3 Ml - 101 Levitiracetam Oral Solution 102 Levitiracetam Oral Solution, 100Mg/Ml, 100Ml Bottle 103 Albendazole Chewable Tablet 400 Mg 104 Albendazole Oral Suspension 200 Mg/5 Ml,10 Ml Bottle 105 Levamasole Tablet 50 Mg 106 Levamasole Tablet 150 Mg 107 Amoxicillin Capsule 250 Mg 108 Amoxicillin Capsule 500 Mg 109 Amoxicillin Oral Suspension 125 Mg/5 Ml, 60 Ml Bottle 110 Amoxicillin + Pottasium Clavulanate Tablet 500 Mg + 125 Mg 111 Amoxicillin + Pottasium Clavulanate Dispersible Tablet 200 Mg +28.5 Mg 112 Amoxicillin + Clavulanic Acid Injection 1.2 Gm , 10 Ml Vial With Diluents 113 Amoxicillin + Clavulanic Acid Injection 250 Mg +50 Mg, Vial With Diluents 114 Ampicillin Sodium Injection 500Mg 2 Ml Vial With Diluent 115 Cefixime Tablet 200 Mg 116 Cefixime Oral Suspension 50 Mg/ 5 Ml, 30 Ml Bottle 117 Cefadroxil Oral Suspension 125 Mg/ 5Ml, 30 Ml Bottle 118 Cefotaxime Injection 250 Mg 119 Cefotaxime Injection 500 Mg 5 Ml Vial With Diluent 120 Cefotaxime Sodium Injection 1 Gm 10 Ml Vial With Diluent 121 Ceftriaxone Injection 250 Mg 2 Ml Vial With Diluent 122 Ceftriaxone Injection 1 G, 10 Ml Vial With Diluents 123 Benzathine Penicillin Injection Powder 12 Lacs Iu , Vial With Diluent 124 Cefoperazone + Sulbactam (1G+1G) Injection 125 Immipenum Injection 500 Mg 126 Imipenem And Cilastatin Injection (500 Mg+500 Mg) 127 Cefazolin Injection 1 Gm 128 Amikacin Injection 250Mg/ Ml, 2 Ml Vial 129 Amikacin Injection 50 Mg/ Ml, 2 Ml Vial 130 Gentamycin Injection 40 Mg/ Ml, 2 Ml Ampoule 131 Azithromycin Tablet 250 Mg 132 Azithromycin Tablet 500 Mg 133 Azithromycin Oral Suspension 40 Mg/Ml , 15 Ml Bottle 134 Levofloxacin Tablet 500 Mg 135 Ofloxacin Tablet 200 Mg 136 Ciprofloxacin Tablet 250 Mg 137 Ciprofloxacin Tablet 500 Mg 138 Ciprofloxacin Injection 2Mg/Ml, 100 Ml Bottle For Infusion Ffs Technology 139 Doxycycline Capsules 100 Mg 140 Cotrimoxazole (Sulfamethoxazole + Trimethoprim) Tablet 800 Mg + 160 Mg 141 Co-Trimoxazole [Sulphamethoxazole (A) + Trimethoprim (B)] Oral Liquid 200 Mg (A) + 40 Mg (B)/5 Ml 142 Metronidazole Tablet 200 Mg 143 Metronidazole Tablet 400 Mg 144 Metronidazole I.V Infusion 5 Mg/Ml, 100 Ml Bottle For Infusion (Ffs Technology) 145 Metronidazole Suspension 200Mg/5Ml , 60 Ml Bottle 146 Cloxacillin Capsule 500 Mg 147 Nitrofurantoin Capsule 100 Mg 148 Vancomycin Injection 500 Mg 149 Linezolid Tablet 600 Mg 150 Norfloxacin Tablet 400 Mg 151 Fluconazole Tablet 150Mg 10*10 152 Fluconazole Tablet 200 Mg 10*10 153 Griseofulvin Tablet 250 Mg 154 Itraconazole Capsules 200 Mg 155 Amphotericin B Powder For Injection 50 Mg And Vial Has Sodium Deoxychlolate Or Liposomal Complex 156 Terbinafine Tablet 250 Mg 157 Acyclovir Tablet 200 Mg 158 Acyclovir Tablet 400 Mg 159 Acyclovir Tablet 800 Mg 160 Tinidazole Tablet 500 Mg 161 Ivermectin Tablet 6 Mg 162 Diethyl Carbamazine Tablet 100Mg 163 Flunarazine Tablet 10 Mg 164 Propranolol Tablet (Sr) 40 Mg 165 Propranol Tablet 20 Mg 166 Levodopa + Carbidopa Tablet 100 Mg + 10 Mg 167 Trihexyphenidyl Tablet 2 Mg 168 Bromocriptine Tablet 2.5 Mg 169 Ferrous Sulpahte + Folic Acid Syrup 100 Mg + 0.5 Mg/ 5 Ml In A Flavoured Base/Vehicle 50 Ml Bottle, Ropp Cap Bottle With Inert Liner & Bottle To Be Provided With A Dispenser To Dispense To 1 Ml, 1.5Ml And 2 Ml Each Time And Packed In A Mono Carton Note:- For Detailed Specifications Kindly See Below Attached Copy. 170 Elemental Iron 60 Mg +Folic Acid 500 Mcg, Sugar Coated And Red Color Tablet 171 Ferrous (Iron Sucrose) Injection 20 Mg/Ml 172 Folic Acid Tablet 5Mg 173 Hydroxycobalamin Injection 1 Mg/ Ml 174 Warfarin (Sodium) Tablet 2 Mg 175 Heparin Injection 1% 176 Enoxaprin Sodium Injection 60 Mg In Pfs 177 Phytomenadion Injection 1 Mg/0.5 Ml Water Based Single Dose Ampoule 178 Plasma Volume Expander Injection ( Each 100 Ml Contains Polygeline, Polypeptides Of Degaraded Gelatin, Cross Linked Via Urea Bridges 3.5 G ( Equivalent To 0.63 G Of Nitrogen) Nacl Ip 0.85 G, Kcl Ip 0.038 G Cacl2 Ip 0.070G Water For Injection Ip Q.S Electrolytes In M.Mol/Litre, 500 Ml Ffs 179 Glyceryl Trinitrate (Sublingual) Tablet 500 Micrograms 180 Glyceryl Trinitrate ( Niroglycerine) Injection 5 Mg/Ml, 5 Ml Ampule 181 Isosorbide Mononitrate Tablet 30 Mg (Sr) 182 Isosorbide Dinitrate Tablet (Sublingual) 5 Mg 183 Metoprolol Tablet 25 Mg 184 Metoprolol Tablet (Sr) 50 Mg 185 Carvediolol Tablet 3.125 Mg 186 Adenosine Injection 3 Mg/ Ml, 1 Ml Ampoule 187 Diltiazem Injection 5 Mg/Ml 188 Diltizem Hydrochloride Tablet 30 Mg (Modified Release), 10*10 189 Amiodarone Tablet 100 Mg 190 Verapamil Tablet 40 Mg 191 Amiodarone Injection 150 Mg/ 3 Ml 192 Atenolol Tablet 50 Mg 193 Amlodipine Tablet 5 Mg 194 Amlodipine Tablet 10 Mg 195 Methyldopa Tablet 250 Mg 196 Methyldopa Tablet 500 Mg 197 Nifedipine Capsule(Sublingual) 5 Mg 198 Nifedipine Tablet Ip Sr/Er 10 Mg 199 Ramipril Tablet 5 Mg 200 Labetalol Tablet 100 Mg 201 Labetolol Injection 5Mg/Ml, 4Ml Amp. 202 Telmisartan Tablet 40 Mg 203 Telmisartan Tablet 80 Mg 204 Losartan + Hydrochlorothiazide Tablet (50 Mg + 12.5 Mg) 205 Olmesartan 20 Mg + Amlodipine 5 Mg + Hydrochlorothiazide 12.5 Tablet 206 Clinidipine Tablet 20 Mg 207 Hydrochlorthiazide Tablet 12.5 Mg 208 Chlorthalidone Tablet 6.25 Mg 209 Nebivalol Tablet 5 Mg 210 Enalapril Tablet 5 Mg 211 Dobutamine Injection 250Mg/5Ml 212 Dopamine Injection 40 Mg/ Ml In 5Ml Ampoule 213 Digoxin Tablet 0.25 Mg 214 Acetylsalicylic Acid Tablet 150 Mg 215 Acetylsalicylic Acid Tablet 75 Mg Gastro-Resistant (Enteric Coated/ Delayed Release) 216 Clopidogrel Tablet 75 Mg 217 Streptokinase Injection Powder 1500000 Iu 218 Atorvastatin Tablet 10 Mg 219 Atorvastatin Tablet 20 Mg 220 Rosuvastatin 10 Mg+ Fenofibrates 160 Mg Tablet 221 Tranexamic Acid Tablet 500 Mg 222 Tranexamic Acid Injection In Water For Injection 100 Mg/Ml, 5 Ml Ampoule 223 Mephentermine Injection 30 Mg/Ml, 1 Ml Amp. 224 Tranexamic Acid 500 Mg + Mefenamic Acid 250 Mg Tablet 225 Citicoline Tablet 500 Mg 226 Clotrimazole Pessaries 200 Mg 227 Clotrimazole Cream 2% W/W, 15 Gm 228 Clotrimazole Mouth Paint 1% W/V In Propylene Glycone Glycerian Base 15 Ml 229 Sertaconazole Cream 2% W/W, 15 Gm 230 Ketaconazole Lotion 2% W/V, 50 Ml 231 Acyclovir Eye Ointment 3% , 4.5 Gm Tube 232 Clindamycin Gel 1% W/W, 10Gm Tube 233 Clobetasol 0.05% + Gentamycin 0.1% Ointment 15 Gm Tube 234 Silver Sulfadiazine Cream 1%, 30 Gm Tube 235 Framycetin Cream 1%, 30 Gm Tube 236 Gentian Violet (Methylrosanilinium Chloride Paint Preparation Aqueous Solution 0.5%W/V), 50 Ml Dark Bottle 237 Benzoyl Per Oxide Gel 2.5%, 20 Gm Tube 238 Permethrin Lotion 5%, 50 Ml 239 Permethrin Cream 5%, 30 Gm 240 Betamethasone Dipropionate Cream 0.1% W/W , 5 Gm 241 Fluticasone Cream 0.01 % 10Gm 242 Calamine Lotion Ip-Calamine Ip-15% W/V, Zinc Oxide Ip-5%W/V,Glycerin Ip-5% W/V ,65Ml Bottle 243 Benzyl Benzoate 25% Lotion 100 Ml 244 Podophylline Resin Topical Solution 25% , 10 Ml Bottle 245 Fusidic Acid Cream 2%, 10Gm Tube 246 Coal Tar Solution 5% W/V, 100 Ml Bottle 247 Salicylic Acid Ointment 6%, 15 Gm Tube 248 White Petrolatum Jelly 100 %, 50 Gm Jar 249 Clotriamazole 1%+ Beclomethasone Dipropionate 0.025% Lotion 15 Ml 250 Mometasone Furoate Cream 0.1 % W/W 251 Mometasone Furoate Cream 0.1 % W/W, 10Gm Tube 252 Hydroquinone 2.0% W/W + Tretinoin 0.025% W/W + Mometasone Furoate 0.1% W/W In A Cream Base Q.S 253 Kojic Acid Cream 2 % 254 Hydroquinone 2%/4% + Tretinoin 0.025 % +Fluocinolone Skin Cream 255 Hydroquinone 4%+ Tretinoin 0.05% +Fluocinolone 0.01 % Skin Cream, 15Gm 256 Tacrolimus Ointment 0.03% W/W, 10 Gm 257 Tacrolimus Ointment 0.1% 10Gm Tube 258 Choline Salicylate Solution Bp Equivalent To Choline Salicylate 8.7 % W/W, Benzalkonium Chloride Solution Ip 0.01 % W/W, Lignocaine Hydrochloride Ip 2.0 % W/W Gel Base Q.S., 10 Ml Packing 259 Sunscreen Lotion Spf 26 ,100Ml Bottle 260 Clobetasone Butyrate(0.05 W/W + Miconazole(2.0 W/W) ,15 Gm Cream - 261 Halobetasol Propionate(0.5% W/W + Salicylic Acid (3% W/W) , 10Gm Ointment 262 Minoxidil Solution 5%, 60Ml Bottle 263 Gamma Benzene Hexachloride 1% Lotion,100 Ml 264 Sertaconazole Nitrate 2 % W/W+ Beclomethasone Dipropionate 0.025% W/W, 15Gm Tube 265 Cotrimazole 1%+ Beclomethasone Dipropionate 0.0025% Lotion 15 Ml Lotion 1%, 0.0025%, 15Ml 266 Mupirocin Cream 2% W/W,5Gm Tube 267 Isotretinoin Capsule 20 Mg 268 Methoxsalen Tablet 10 Mg 269 Triamcinolone Injection 20 Mg/ Ml 270 Triamcinolone Injection 40 Mg/Ml 271 Povidone Iodine Solution 5% ,500 Ml 272 Povidone Iodine Ointment 5%,15 Gm 273 Povidone Iodine Scrub (Povidone Iodine Cleansing Solution 7.5 %, W/V With Foaming Agent) 500 Ml 274 Povidine Iodine Scrub 7.5% W/V, 500Ml 275 Hydrogen Peroxide Solution 6%, 400 Ml Bottle 276 Cetrimide Solution 20% Conc. For Dilution, 500 Ml Plastic Bottle 277 Chlorhexidine Solution 5% Conc. For Dilution, 500 Ml 278 Bleaching Powder Containg Not Less Then 30% W/W Of Avialble Chlorine, 1Kg/25 Kg 279 Feracrylum 1% W/W Sterile Solution 100Ml Bottle 280 Feracrylum 3% W/W Gel , 15Gm Tube 281 Tritium Vulgare Extract And Phenoxyethanol Cream,32Gm Tube 282 Glutraldehyde Solution 2% - 2.5%, 1 Litre Pack 283 Potassium Permanganate Crystal For Solution 100 Gm 284 Bleaching Powder Containg Not Less Then 30% W/W Of Available Chlorine Powder - 285 Furosemide Tablet 40 Mg 286 Furosemide Injection 10 Mg/Ml, 2Ml Ampoule 287 Mannitol Intravenous Infusion 20% W/V, 100Ml Ffs Technology 288 Spironolactone Tablet 25 Mg 289 Torasemide Tablet 10 Mg 290 Tamsulosin 0.4 Mg + Dutasteride 0.5 Mg Tablet 291 Disodium Hydrogen Citrate Oral Solution/Syrup 1.38 -1.45 Gm/ 5 Ml, 100 Ml Bottle 292 Sodium Bicarbonate Infusion 7.5% W/V, 10 Ml Ampoule 293 Alkalizer Mb6 500Ml (Potassium Citrate Magnisum Citrate Syrup & Vit B6) 294 Bethanecholchloride Tablet 25 Mg 295 Darifenacin Tablet 7.5 Mg 296 Silodosin Tablet/Capsule 8.0 Mg 297 Mirabegron Tablet 50 Mg 298 Pyridium Tablet 200 Mg 299 Aluminium Hydroxide 240 Mg + Magnesium Hydroxide 100Mg+ Simethicone 25 Mg + Magnesium Carbonate 60 Mg Chewable Tablet 300 Dried Aluminium Hydroxide Gel + Magnesium Hydroxide + Simethicone Oral Suspension 250 Mg+ 250 Mg+ 50 Mg/ 5 Ml, 170 Ml Bottle 301 Ranitidine Injection 25 Mg/Ml, 2 Ml Amp 302 Ranitidine Syrup 150 Mg/10 Ml 303 Ranitidine Tablet 150 Mg, Film Coated 304 Omeprazole Capsule 20 Mg 305 Pantoprazole Injection 40 Mg, Vial With 10 Ml Diluent 306 Pantoprazole + Domperidone Sr (40Mg+30Mg) Capsule 307 Sucralfate 1Gm With Oxetacain 10Mg/10Ml Suspension 308 Simethicone Syrup 40Mg,60 Ml Bottle 309 Domperidone Tablet 10 Mg 310 Domperidone Suspension 1 Mg/Ml, 30 Ml Bottle 311 Cinnarizine Tablet 25 Mg 312 Metoclopramide Tablet 10 Mg 313 Metoclopramide Injection 5 Mg/Ml, 2 Ml Ampoule 314 Ondansetron Tablet 8 Mg 315 Ondansetron Injection 2Mg/Ml ,2Ml Ampoule 316 Ondansetron Oral Liquid 2 Mg/ 5 Ml 317 Ondansetron Oral Liquid 2Mg/5 Ml , 30 Ml Bottle 318 Promethazine Injection 25 Mg/Ml, 2 Ml Amp 319 Promethazine (Hydrochloride) Elixir Or Syrup 5 Mg/5 Ml, 60 Ml Bottle 320 Doxylamine Tablet 10 Mg 321 Prochlorperazine Mouth Dissolving Tablet Flavored Base 5Mg 322 Anti-Haemorrhoidal Containing: Beclomethasone Dipropionate 0.025% W/W, Phenylephrine Hyderochloride 0.10% W/W, Lignocaine Hydrochloride 2.5% W/W In Soft Paraffin Base 20 Gm Tube 323 Dicyclomine Tablet 10 Mg 324 Dicyclomine Oral Solution 10Mg/5Ml 325 Mephenamic Acid + Dicyclomine Tablet 500 Mg +20 Mg 326 Drotaverine Tablet 80 Mg 327 Drotaverine Injection 40 Mg/ 2 Ml 328 Hyoscine Butyl Bromide Tablet 10 Mg 329 Hyoscine Butyl Bromide Injection 20 Mg/ Ml, 1 Ml Amp. 330 Bisacodyl Gastro-Resistant (Enteric Coated/Delayed Release) Tablet 5 Mg 331 Lactulose Solution 10 Gm/ 15 Ml, 60 Ml Bottle 332 Ispaghula Granules/ Husk/ Powder 100 Gm 333 Enema 334 Dioctyl Sulfosuccinate Sodium Liquid,100 Ml 335 Magnesium Hydroxide Liquid 100 Ml 336 Oral Rehydration Salts Powder For 1000 Ml Solution 337 Oral Rehydration Salts Powder For 200 Ml Solution 338 Zinc (Sulphate) Dispersible Tablet 20 Mg 339 Octreotide Injection 100 Mcg/Ml, Single Dose 1 Ml Vial 340 Levosulpride (Sr) 75 Mg + Rabeprazole (Ec) 20 Mg Capsule 341 Saccharomyces Boulardii 5 Cfu Sachets 342 Probiotic Capsule/Syurp (Vizylac/Sporolac) 343 Probiotic Syrup (Streptococus Faecalis 30 Million, Clostridium Butirium 2 Million,Bacillius Mesentiricus 1 Million,Lactic Acid Bacillus 50 Million) Suspension In 5Ml 344 Probiotic Capsule (Lactobacillius Blends) 345 Chymotrypsin+ Trypsin (1:6 ) Tablet 100K Au 346 Cyproheptadine Hcl Ip-2Mg, Tricholine Citrate-275 Mg, Sorbitol Solution (70%)(Non Crystallising) Ip-2 Gm, 200 Ml Bottle 347 Erythropoietin Injection 4000 Units/Ml, Single Dose 1 Ml Vial 348 Insulin (Soluble) Injection 40 Iu/Ml In 10 Ml Vial 349 Intermediate-Acting Insulin (Nph) Injection 40 Iu/Ml In 10 Ml Vial 350 Biphasic Isophane Injection 40 I.U/Ml, (30/70), 10 Ml Vial 351 Lantus Insulin (Insulin Glargine 100 Units/Ml) 352 Metformin Tablet 500 Mg 353 Metformin Tablet 1 Gm 354 Metformin Tablet Sr 500Mg 355 Metformin Tablet Sr 1 Gm 356 Glimipride Tablet 1 Mg 357 Glimipride Tablet 2 Mg 358 Teneligliptin Film Coated Tablet 20 Mg 359 Voglibose 0.3 Mg + Metformin 500Mg+ Glimipride 1 Mg Tablet 360 Vildagliptin Tablet 50 Mg 361 Empagliflozin Tablet 10 Mg 362 Glibenclamide Tablet 5 Mg 363 Clomifene Citrate Tablet 50 Mg 364 Medroxyprogesterone Tablet 10 Mg 365 Norethisterone Tablet 5 Mg 366 Micronized Progesterone Tablet 200 Mg 367 Mifepristone Tablet 200 Mg 368 Mifepristone Tablet 25 Mg 369 Cabergoline Tablet 0.5 Mg 370 Dienogest Tablet 2 Mg 371 α -Hydroxyprogesterone Injection 500 Mg 372 Hcg 5000 Iu(Human Chorionic Gonadotropin) Injection 373 Conjugated Estrogen Tablet 0.625 Mg 374 Ethamsylate Tablet 500 Mg Tablet - 375 Latrazole Tablet 2.5 Mg 376 Thyroxine Tablet 50 Mcg 377 Carbimazole Tablet 5 Mg 378 Ethinyestradiol Tablet 5 Mcg 379 Estrogens Cream 0.625 Mg 380 Ethinylestradiol Tablet (0.03 Mg+ Levonorgestrel (0.15) Tablet 0.03Mg, 0.15 381 Copper Bearing Intra-Uterine Device Iucd 380 A & Iucd 375 - 382 Male Condom - 383 Non Harmonal Ormeloxifene 30Mg Tablet 384 Emergency Contraceptive Pill Levonorgestrel Tablet 1.5 Mg 385 Pregency Testing Kit - 386 Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 150 Mcg/Vial 387 Anti-Rho-D Immunoglobulin(Human) Injection (Polyclonal) Injection 300Mcg/Vial 388 Injection Recombinant Anti-D Immunoglobulin 300Mcg Vial/Pfs 389 Anti Rabies Immunoglobulin Injection (Human) 150 Iu/Ml, 2Ml Vial 390 Hepatitis B Immunoglobulin Injection 1Ml. 391 Hepatitis B Immunoglobulin Injection 100 Iu, 1 Ml Vial - 392 Tetanus Toxoid Injection 0.5 Ml Ampoule 393 Rabies Vaccine Single Dose Rabies Vaccine 2.5 Iu Injection For Human Use Prepared In Chick Embryo/ Vero Cell/ Human Diploid Culture Single Dose With Diluent And Disposable Syringe With Needle 394 Decaravimab+ Miromavimab Injection (600 Iu) 3 Ml 395 Atracurium Besylate Injection 10 Mg/ Ml, 2.5 Ml Amp. 396 Succinyl Choline Injection 50Mg/Ml, 10Ml Vial 397 Neostigmine Injection 500 Mcg/ Ml, 5 Ml Ampoule 398 Vecuronium Injection 10 Mg Vial 399 Ciprofloxacin Eye Drops 0.3%, 10 Ml Plastic Bottle 400 Ciprofloxacin Opthalmic Ointment 0.3 % 5 Gm Tube 401 Tobramycin Opthalmic Solution 0.3% W/V, 5Ml 402 Natamycin Eye Drops 2%, 5 Ml 403 Acylovir Eye Oint 5%,5 Gm 404 Povidone Iodine 5% Eye Drops 405 Prednisolone Sodium Phosphate Eye Drops 1%, 5 Ml 406 Flurbiprofen Eye Drops 0.03%, 10 Ml Vial 407 Flouromethalone Eye Drops 0.1 % W/V,5 Ml Vial 408 Olopatadine 0.1% Eye Drops 5 Ml 409 Acetazolamide Tablet 250 Mg 410 Timolol Eye Drops 0.5%, 5Ml 411 Atropine Drops 1% 412 Homatropine Eye Drops 1% 413 Tropicamide + Phenylepherine Eye Drops 0.8% + 5%, 5 Ml Vial 414 Cyclopentolate Eye Drops 1% W/V 415 Sodium Carboxymethyl Cellulose Eye Drops 0.5% W/V, 10 Ml 416 Hydroxypropyl Methylcellulose Injection 2% , 3 Ml Pfs (Glass Syringe) 417 Hyaluronidase Injection 1500 Iu/Ml 418 Tryptan Blue Dye 0.06% W/V, 1 Ml Vial 419 Moxifloxacin Eye Drops 0.5% W/V ,5Ml 420 Ranibizumab Injection 10Mg/Ml 421 Travoprost 40 Mg/Ml 2.5Ml Vial Eye Drop 422 Xylometazoline Nasal Drops 0.05 %, 10 Ml 423 Xylometazoline Nasal Drops 0.1 %, 10 Ml 424 Saline Nasal Drops 0.65%, 10 Ml 425 Wax Dissolving Ear Drops (Paradichlorbenzene 2% W/V, Benzocain 2.7 % W/V, Chlorbutol 5% W/V, Turpentine Oil 15% Ear Drops ), 10 Ml 426 Clotrimazole 1% W/V + Lignocaine Hydrochloride 2% W/V Ear Drops, 5Ml Bottle 427 Clotrimazole Ear Drops 5 Ml Vial 428 Ichthoimol Glycerine Solution 10 Ml Vial 429 Ciprofloxacin(0.3%)+Dexametasone(0.1%) Ear Drops ,5Ml 430 Antibacterial & Anti Fungal Ear Drop (Beclomethasone 0.025% W/V +Chloramphenicol 5% W/V +Clotrimazole 1% W/V ,Glycerine Base), 10 Ml Ear Drops 431 Fluticasone Furoate Nasal Spray 432 Fluticasone Furoate Nasal Spray 27.5Mcg, 10Ml 433 Boro-Spirit Ear Drops,3% W/V Ear Drops 10 Ml 434 Methyl Ergometrine Tablet 125 Mcg 435 Methyl Ergometrine Injection 200 Mcg In 1 Ml Ampoule 436 Oxytocin Injection 5 Iu In 1 Ml Ampoule 437 Carboprost Injection 250 Mcg In 1 Ml Amp./ Vial 438 Misoprostol Tablet 200 Mcg 439 Misoprostol Tablet 25 Mg 440 Dinoprostone Gel 0.5 Mg, 3 Gm 441 Isoxsuprine Tablet 10 Mg 442 Isoxsuprine Injection 5 Mg/ Ml,2Ml Ampoule 443 Valethamate Injection 8 Mg/Ml 444 Betamethasone Injection 4Mg/Ml 445 Chlorpromazine (Hydrochloride) Tablet 100 Mg 446 Fluphenazine Injection 25 Mg, 1 Ml Ampoule 447 Haloperidol Tablet 5 Mg 448 Haloperidol Injection 5Mg/1 Ml, 1 Ml Amp 449 Haloperidol Injection Long Acting 50 Mg 450 Risperidone Tablet 2 Mg 451 Risperidone Tablet 4 Mg 452 Risperidone Injection Long Acting 25 Mg 453 Quetiapine Tablet 50 Mg 454 Quetiapine Tablet Sr 100 Mg 455 Aripipralzole Tablet 10 Mg 456 Aripiprazole Tablet 15 Mg 457 Aripiprazole Tablet 5 Mg 458 Olanzapine Tablet 20 Mg 459 Olanzapine Tablet 10 Mg 460 Olanzapine Injection 405 Mg 461 Olanzapine Injection 10 Mg 462 Olanzapine Injection 210 Mg Long Acting 463 Olanzapine Injection 300 Mg Long Acting 464 Clozapine Tablet 100 Mg 465 Clozapine Tablet 50 Mg 466 Amitriptyline Tablet 10 Mg 467 Amitriptyline Tablet 25 Mg 468 Fluoxetine Capsule 20 Mg 469 Imipramine Tablet 25 Mg 470 Sertraline Tablet (Sr) 50 Mg 471 Sertraline Tablet 100 Mg 472 Escitalopram Tablet 10 Mg 473 Paroxetine (Cr) Tablet 25 Mg 474 Paroxetine Tablet (Cr) 12.5 Mg 475 Capsule Venalafaxine Extended Release 37.5 Mg 476 Capsule Venalafaxine Extended Release 75 Mg 477 Gabapentin + Nortriptyline (400/10Mg) Tablet 478 Mirtazapine Tablet 15 Mg 479 Dothiepin Tablet 25 Mg 480 Lithium Carbonate Tablet 300 Mg 481 Lithium Tablet 400 Mg Sr 482 Alprazolam Tablet 0.25 Mg 483 Alprazolam Tablet 0.5 Mg 484 Donepezil Tablet 5 Mg 485 Donepezil Tablet 10 Mg 486 Clonazepam Tablet 0.5 Mg 487 Clonazepam Tablet 1 Mg 488 Donepezil Injection 10 Mg 489 Etizolam Tablet 0.50 Mg 490 Duloxetine Tablet 30 Mg 491 Bupropion Tablet 150 Mg 492 Buprinorphine Tablet 2 Mg 493 Buprinorphine Tablet 0.4 Mg 494 Disulfiram Tablet 250 Mg 495 Disulfiram Tablet 500 Mg 496 Nicotin Chewgum 2 Mg 497 Nicotin Chewgum 4 Mg 498 Naltrexone Tablet 50 Mg 499 Amisulpride Tablet 50 Mg 500 Pregablin 75Mg +Methylcobalmin 1500Mg +Nortriptylline 10Mg 501 Methylphenidate Tablet 5 Mg 502 Memantine Tablet 5 Mg 503 Tranylcypromine Tablet 5 Mg 504 Desvenlafaxine Tablet 50 Mg 505 Buprenorphine Transdermal Patch 10 Mcg/Hour 506 Buprenorphine Transdermal Patch 20 Mcg/Hour 507 Lacosamide Tablet 100 Mg 508 Blonanserin Tablet 4 Mg 509 Breviteracetam Tablet 50 Mg 510 Eeg Paste 511 Agomelatine Tablet 25 Mg 512 Vortioxetine Tablet 10 Mg 513 Melatonin Tablet 3 Mg 514 Tadalafil 10 Mg 515 Perampenel 2 Mg 516 Fluvoxamine 150 Mg 517 Ursodeoxycholic Acid Tablet 300 Mg 518 Cariprazine Tablet 1.5 Mg 519 Atomoxitine Capsule 10 Mg 520 Betahistine Tablet 8 Mg 521 Lamotrigine Tablet 25 Mg 522 Salbutamol Tablet 4 Mg 523 Salbutamol Syrup 2 Mg/5 Ml, 100 Ml Bottle 524 Salbutamol Inhaler Areosol 100 Microgram/ Dose, Mdi, Single Packing 525 Salbutamol Nebulizer /Respirator Sol. 2.5Mg, 2.5Ml Respule 526 Etophylline + Theophylline Tablet 231 Mg + 69 Mg (Sr) 527 Etophylline + Theophylline Injection 169.4 Mg + 50.6 Mg/2 Ml Ampoule 528 Budesonide Inhalation 200 Mcg/Dose, 200 Mdi/Dpi 529 Budesonide Nasal Spray 100 Mcg/Dose, Single Unit 530 Budesonide Respirator Solution For Use In Nebulizer 1 Mg, 2Ml Respule 531 Ipratropium Respirator Solution For Use In Nebulizer 250Mcg/ 1Ml, 2 Ml Respule 532 Cough Expectorent (Salbutamol+Bromhexine ) Syrup 2 Mg +4 Mg 533 Aminophylline Injection 25 Mg/ Ml, 10 Ml Ampoule 534 Budesonide + Formoterol Inhalation (200 Mcg + 6 Mcg), 120 Mdi 535 Cough Syrup Diphehydramine 14.08 Mg + Ammonium Chloride 138 Mg + Sodium Citrate 57.03Mg + Menthol Ip 1.14 Mg/5 Ml, 100 Ml Bottle 110 Ml Bottle 536 Cough Syrup Diphehydramine 14.08 Mg + Ammonium Chloride 138 Mg + Sodium Citrate 57.03Mg + Menthol Ip 1.14 Mg/5 Ml, 100 Ml Bottle - 537 Cough Syrup Ambroxol 15 Mg+ Terbutaline Sulphate 1.25 Mg+ Guaiphenesin 50 Mg+ Menthol 2.5 Mg, 100 Ml Bottle 538 Doxofylline Tablet 400 Mg 539 Dextromethorphan (15Mg/5Ml)+Chlorpheniramine Maleate (2Mg/5Ml) +Phenylephrine Hcl (5Mg/Ml) Oral Syrup, 100 Ml Bottle 540 Caffeine Citrate Injection 20 Mg/Ml (Equivalent To 10 Mg Caffeine Base/Ml) 541 Caffeine Citrate Oral Solution 20 Mg/Ml,3Ml 542 Clarithromycin Tablet 500 Mg 543 N- Acetylcysteine Tablet 600 Mg 544 Glycopyrronium 25 Mcg + Formoterol Fumarate 12 Mcg Rota Caps 545 Oral Glucose 75 Gm 546 Dextrose Intravenous Infusion Ip 5 % W/V , 500 Ml Ffs Bottle 547 Dextrose Intravenus Infusion Ip 10% W/V, 500 Ml Ffs Bottle 548 Dextrose Intravenous Infusion Ip 25% W/V, 100 Ml Ffs Bottle 549 Dextrose 5 % W/V With Sodium Chloride 0.9% W/V For Intravenous Infusion 500 Ml Ffs Bottle 550 Multi Electrolyte Injection (Isolyte P Multiple Electrolyte & Dextrose Injection Type 1 ), 500 Ml Ffs Bottle 551 Potassium Chloride Oral Solution 10%, 100 Ml Bottle 552 Potassium Chloride (Solution) Injectable 15% (150Mg/Ml) , 10 Ml Amp. 553 Ringer Lactate (Solution ) For Injection ( Compound Sodium Lactate) 500 Ml Ffs Bottle 554 Normal Saline (Sodium Chloride) Injection Solution 0.9% Isotonic, 100Ml 555 Normal Saline Injection 3% 556 Normal Saline (Sodium Chloride) Injection 0.9% W/V, 500 Ml Bottle ( Ffs Technology) 557 Water For Injection 5Ml Ampoule 558 Injection Human Albumin 5% Infusion Solution 5% 559 Injection Human Albumin 20% Infusion Solution 20 560 Ascorbic Acid Tablet 500 Mg 561 Pyridoxine Tablet 10 Mg 562 Pyridoxine Tablet 100 Mg 563 Vitamin A Oral Solution 100000 Iu/Ml, 100 Ml 564 B-Complex Tablet 565 Vitamin D3 Drops 400 Iu/Ml 566 Vitamin D3 Tablet (Chewable) 60000Iu 567 Calcium Salts 500 Mg+ Vitamin D3 250 Iu Tablet 568 Thiamine Injection 100 Mg/Ml, 2 Ml Vial 569 Calcium Phosphate Suspension/Syrup:- Each 5Ml Contains: Vit D3 (Cholecatciferol) Ip-200Iu Vitamin B12 (Cyanocobalamin) Ip 2.5Mcg, Calcium- 82Mg (As A Mixture Of Calcium Phosphats Calculated As 0.12G Ca3 (Po4) 2 Suspension/Flavoured Syrupy Base- Q.S. 200Ml Bottle. 570 \Hematinic With Amino Acids Vitamin And Zinc Syrup 200 Ml Bottle, Each 10 Ml Contains: Ferrous Glycine Sulphate-216.50Mg, L-Histidine Hcl-25.0 Mg, Pyridoxine Hydrochloride Ip-1.5 Mg, Nicotinamide Ip-25.0 Mg, Folic Acid Ip-0.5 Mg, Cyanocobalamin Ip-2.5 Mcg, Zinc Ascorbate 50 Mg, Approved Colors Used\ 571 Multi Vitamin Infusion 10 Ml: Each Ml Contains Vitamin A (As Vitamin A Concentrate Oily Form) Lp 1100 Lu, Cholecalciferol Lp 100 Lu, Tocopheryl Acetate Lp 0.5Mg, Nicotinamide Lp 10Mg, Riboflavin Sodium Phosphate Lp 1.4Mg, Pyridoxine Hydrochloride Lp 1.65Mg, Thiamine Hydrochloride Lp 5.0Mg, Ascorbic Acid Ip 50.0Mg, L-Cysteine Hydrochloride Usp 0.2Mg, Benzyl Alcohol (As Preservative) Lp 1.0% V/V, Water For Injections Lp Q.S 572 Methylcobalamin Tablet 1500 Mcg 573 Pregabalin 75 Mg+ Methylcobalamin 1500 Mcg Tablet 574 Alfacalcidol Soft Gelatin Capsule 0.25 Mcg 575 Biotin Tablet 10 Mg 576 Thiamine Tablet 100 Mg 577 10 Essential Amino Acid With Vitamins And Minerals Capsules (10X10) 578 Amino Acid Iv Infusion Minimum 10 Essential Amino Acids, 250Ml Bottle - 579 Artesunate Injection 60 Mg/Ml 580 Chloroquine Phosphate Injection 40 Mg/Ml 581 Chloroquine Phosphate Tablet 250 Mg, Equivalent To 155 Mg Chloroquine Base 582 Chloroquine Phosphate Oral Solution 50 Mg/ 5 Ml, 50 Ml Bottle 583 Primaquine Tablet 2.5 Mg 584 Primaquine Tablet 7.5 Mg 585 Primaquine Tablet 15 Mg 586 Quinine Sulphate Tablet 300 Mg 587 Quinine Dihydrochloride Injection 300 Mg/Ml, 2 Ml Ampoule 588 Sulfadoxine + Pyrimethamine Tablet 500 Mg + 25 Mg 589 Temphos 50% Ec 5 Liter Pack 590 Malathion Technical 95%, 250 Kg 591 Deltamethrin 2.5% Wp, 25 Kg 592 Cyphenothrin 5% Ecs (Insecticide/Adulticide For Fogging) 593 Bivalent Antigen Based Rapid Diagnostic Kit For Malaria 594 Pyrethrum Extract 2% 595 Dengue Ns1 Antigen Elisa Based Test Kit,96 Test/Kit - 596 Mac Elisa Igm Dengue Kit 597 Sofosbuvir 400 Mg Tablet + Ledipasvir 90 Mg Tablet 598 Sofosbuvir 400 Mg Tablet 599 Daclatasvir 60 Mg Tablet 600 Daclatasvir 30 Mg Tablet 601 Entecavir 1 Mg Tablet 602 Entecavir 0 .5 Mg Tablet 603 Ribavirin Capsules 200 Mg 604 Tenofovir Tablet 300 Mg 605 Sofosbuvir 400Mg+ Velpatasvir 100 Mg Tablet 606 Rtpcr Kits For Quantitative Viral Load Test For Hepatitis B Virus 607 Rtpcr Kits For Quantitative Viral Load Test For Hepatitis C Virus 608 Storage Vial 5 Ml 609 Racked Filter Pipette Micro-Tips(Sterile) 10 Ul 610 Racked Filter Pipette Micro-Tips(Sterile) 20 Ul 611 Racked Filter Pipette Micro-Tips(Sterile) 1000 Ul 612 Racked Filter Pipette Micro-Tips(Sterile) 200 Ul 613 Filter Pipette Micro-Tips (Sterile) 10 Ul 614 Filter Pipette Micro-Tips (Sterile) 20 Ul 615 Filter Pipette Tips (Sterile) 100 Ul 616 Filter Pipette Tips (Sterile) 200 Ul 617 Filter Pipette Tips (Sterile) 1000 Ul 618 Ethanol Imported (20 Bottles Per Bottle) 5 Liter Pack 619 Molecular Biology Grade Water As Per Requirement 620 Screw Capped Storage Vial 2Ml (500 Vials) Per Pack 2 Ml 621 100 Well Micro Tube Storage Box 622 Para Film 623 Blue Nitrile Gloves 624 Single Channel Variable Volume Micropipette 0.5-10 Ul 625 Single Channel Variable Volume Micropipette 02-20 Ul 626 Single Channel Variable Volume Micropipette 05-50 Ul 627 Single Channel Variable Volume Micropipette 10-100 Ul 628 Single Channel Variable Volume Micropipette 20-200 Ul 629 Single Channel Variable Volume Micropipette 100-1000 Ul 630 96 Well Qper Plates With Adhesive Optical Scaling Membrane 631 Individual Pcr Tubes 8-Tube Strips(Clear) 632 Optical Flat 8-Cap Strips 0.2Ml Tube Strips 633 8 Channel Variable Value Micropipette 2-20 Ul 634 Micro Centrifuge Tubes Mctival (Sterile) 2 Ml 635 96 Well Reversible Rack F 0.5 To 2.0Ml Vials 636 Rnase And Dnase Degradation Solution 637 Rnase And Dnase Degradation Solution Wipes 638 Dna Blood Extraction Kit 639 Viral Rna Extraction Kit 640 Purified Freeze €“ Dried Human Coagulation Factor Viii, Virus Inactivated Injection 250 Iu 641 Anti Hemophillic Factor Ix Vial Injection Size 500 Iu 642 Anti Hemophillic Factor Vii Injection 1Mg,Vial/Ampoule 643 Anti Hemophillic Factor Vii Injection 2Mg,Vial/Ampole 644 Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 500 Iu,Vial/Ampoule 645 Anti Hemophillic Factor Viii Inhibitor Bypassing Agent Injection 1000 Iu,Vial/Ampoule 646 Recombinant Anti Haemophilic Factor Viii (Rf Viii)Standard Half Life Injection 250 Iu 647 Recombinant Anti Haemophilic Factor Viii (Rf Viii)Extended Half Life Injection 500 Iu 648 Recombinant Anti Haemophilic Factor Ix(Rf Ix )Standard Half Life Injection 250 Iu 649 Recombinant Anti Haemophilic Factor Ix (Rf Ix)Extended Half Life 500 Iu 650 Emicizumab-Kxwh Injection 30 Mg/Ml 651 Emicizumab-Kxwh Injection 60 Mg/0.4 Ml 652 Anti Haemophilic Factor Ix Vial Injection 600Iu 653 Leuco Reduction Filter Bed Side For Packed Red Blood Cells - 654 Sanitary Napkin 655 Weekly Iron Folic Acid Tablet Each Tablet Containing 60 Mg Elemental Iron+500 Mcg Folic Acid, Sugar Coated ,Blue Colour 656 Iron And Folic Acid Tablet ( Wifs Junior ) Containing Dried Ferrous Sulphate Ip Equivalent To Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet. Tablet Are Sugar Coated And Pink Coloured Tablets With Only Edible Colours Used Tablet Ferrous Iron 45Mgm And Folic Acid Ip 0.4Mg Per Tablet 657 Salt Testing Kit 658 Oseltamivir Tablet 75 Mg 659 Oseltamivir Tablet 45 Mg 660 Oseltamivir Tablet 30 Mg 661 Oseltamivir Syrup (Each 1 Ml Reconstituted Suspension Contain 12 Mg Oseltamivir, 75 Ml Bottle) Syrup 662 Seasonal Influenza Quadrivalent/ Tetravalent Vaccine 663 Deferiprone Tablet 500 Mg 664 Deferasirox Tablet 500 Mg 665 Desferrioxamine Injection 500 Mg 666 Medroxyprogesterone Acetate Injection Ip (Dmpa ) 25 X 1X 1Ml (Contraceptive Injection For Im Use Only) 667 Single Blood Bags 350 Ml 668 Double Blood Bags 350 Ml 669 Triple Blood Bags 450 Ml 670 Quadruple Blood Bags 450 Ml 671 Double Blood Bag 450 Ml 672 Triple Blood Bags 350 Ml 673 Triple Blood Bag With Sagm 350 Ml 674 Triple Blood Bag With Sagm 450 Ml 675 Quadruple Blood Bag With Sagm 350 Ml 676 Quadruple Blood Bag With Sagm 450 Ml 677 Hiv Elisa (96 Test Each) 678 Hbsag Elisa (96 Test Each) 679 Hcv Elisa (96 Test Each) 680 Hiv Rapid (30 Test Each) 681 Hbsag Rapid (30 Test Each) 682 Hcv Rapid (30 Test Each) 683 Rpr/Vdrl (50 Test Each) 684 Reagents Anti-A, Anti-B, Anti-D Sera 685 Reagents Anti-Ab Serum 686 Reagents Antihuman Globulin Serum 687 Reagents Anti-A1 (Lectin) Serum 688 Reagents Bovine Albumin 22% 689 Aprepitant 80Mg (Kit Contains 3 Caps) 690 Aprepitant Kit 120 Mg 691 Bleomycin Injection 15 Mg, 15 Mg/Ml Vial 692 Capecitabine Tablet 500 Mg 693 Capecitabine Tablet 1000 Mg 694 Carboplatin Injection 150 Mg, 10 Mg/Ml Vial 695 Carboplatin Injection 450 Mg, 10Mg/Ml Vial 696 Cisplatin Injection 50 Mg, 1 Mg/Ml Vial 697 Cisplatin Injection 10 Mg 698 Cyclophosphamide Injection 1000Mg, 1.33Mg/Ml Vial 699 Cyclophosphamide Injection 500Mg, 10Mg/Ml Vial 700 Cyclophosphamide Tablet 50 Mg 701 Dacarbazine Injection 200 Mg, 10Mg/Ml Vial 702 Dacarbazine Injection 500 Mg 703 Docitaxel Injection 120 Mg, 20Mg/ 0.5 Ml Vial 704 Doxorubicin (Hydrochloride Powder) Aqueous Solution 10Mg/2Ml 705 Doxorubicin (Hydrochloride Powder) Aqueous Solution 50 Mg/ 2 Ml Vial 706 Epirubicin Injection 50 Mg, 2Mg/Ml Vial 707 Epirubicin Injection 10 Mg, 2Mg/Ml Vial 708 Etoposide Injection 100Mg, 20Mg/Ml Vial 709 Etoposide Capsule 50 Mg 710 5-Fluorouracil Injection 500Mg, 50Mg/Ml Ampules 711 Fluorouracil Injection 1 Mg 712 Filgrastim Injection 300Mcg, 300Mcg/0.5 Ml Prefilled Syringe 713 Peg Filgrastim Injection 6 Mg 714 Geftinib Tablet 250 Mg 715 Gemcitabine Injection 200Mg, 100Mg/Ml Vial 716 Gemcitabine Injection 1000Mg, 10Mg/Ml Vial 717 Imatinib Tablet 400 Mg 718 Isophosphamide Injection 200Mg, 100Mg/Ml Vial 719 Lenalidomide Tablet 10 Mg 720 Letrozole Tablet 2.5 Mg 721 Oxaliplatin Injection 50Mg, 5Mg/Ml Vial 722 Oxaliplatin Injection 100Mg, 5Mg/Ml Vial 723 Paclitaxel Injection 260Mg, 10Mg/1.67 Ml Vial 724 Pemetrexate Injection 500Mg, 25Mg/Ml Vial 725 Tamoxifen Citrate Tablet 20 Mg 726 Tamoxifen Citrate Tablet 10 Mg 727 Vinblastine Injection 10 Mg, 1Mg/Ml Vial 728 Vincristine Injection 1 Mg, 1Mg/Ml Vial 729 Ateplase Injection 20 Mg 730 Ateplase Injection 50 Mg 731 Tenecteplase Injection 20 Mg 732 Rituximab Injection 500 Mg 733 Methotrexate Injection 50 Mg 734 Methotrexate Tablet 50 Mg 735 Zolidronic Acid Injection 4 Mg 736 Actinomycin Injection 0.5 Mg 737 Goserline Injection 10.8 Mg 738 Luperolide Injection 22.5 Mg 739 Degaralix Injection 240 Mg 740 Thalidomide Tablet 100 Mg 741 Exemestene Tablet 1 Mg 742 Sunitinib Tablet 50 Mg 743 Pazopanib Tablet 200 Mg 744 Dexamethasone Tablet 4 Mg 745 Dexamethasone Tablet 8 Mg 746 Erlotinib Tablet 100 Mg 747 Morphine Tablet 10 Mg 748 Morphine Tablet 30 Mg Sr 749 Buprinorphine Patch 5 Mg 750 Buprinorphine Patch 10 Mg 751 Buprinorphine Patch 15 Mg 752 Iohexol Injection 300 Mg 753 Zoledronic Acid Injection 4 Mg 754 Trastuzumab Injection 150 Mg 755 Trastuzumab Injection 450 756 Onco Bcg Injection 757 Onco Bcg 80Mg Injection 758 Mitomycin Injection 40 Mg 759 Granisetron Injection 1 Mg 760 Leucovorin Injection 50 Mg 761 Bortezomib Injection 2 Mg 762 Ifosfamide Injection 1 Gm 763 Mesna Injection 400 Mg 764 Carfilzomib Injection 60 Mg 765 Bicalutamide Tablet 50 Mg 766 Sorafenib Tablet 200 Mg 767 Temozolamide Tablet 100 Mg 768 Temozolamide Tablet 250 Mg 769 Clindipine Tablet 10 Mg 770 Codon Set 771 Codon I/V Set Woth Air Vent & 0.2 Micron Filter 772 Granisetron Injection 3 Mg 773 Reteplase Injection 10.4 U(18.1 Mg) Kit 774 Meropenum Injection 125 Mg 775 Meropenum Injection 500 Mg 776 Piperacillin 1 Gm + Tazobactum 0.12Gm Injection 777 Piperacillin 4 Gm + Tazobactum 0.5Gm Injection,Vial Injection 4 Gm+ 0.5 Gm 778 Netilmycin Injection 25Mg/Ml 779 Ethamsylate Injection 250 Mg/2 Ml 780 Dns ( Sodium Chloride And Dextrose, Each 100 Ml Contains Dextrose 5 Gm, Nacl 0.9 G) 781 Calcium Syrup Each 5 Ml Contains Calcium 250Mg, Vitamin D3 125 Iu 782 Simyl Mct Oil (Medium Chain Triglycerides And Permitted Antioxidants (Tocopherol Accetate) 783 Ecg Electrodes (Neonate) 784 Umbilical Catheter No. 5, (5 Fr Length 37 Cm, -31Ml/Min Pvc 785 Umbilical Catheter No. 6 (6 Fr Length 37 Cm, -31Ml/Min Pvc 786 Oxygen Tubing, Suction Tubing (Different Colours) 787 Triway (Three Way Stop Clock) Lipid Resistant Pyrogen Free, Sterile, Latex Free 788 Bone Narrow Needle For Neonates 18 G 789 Blood Lancets For Glucometer 790 Grip Lock 791 Picc Line 24 G, 28 G 792 Suction Plain Catheter No. 6, Disposable Pyrogen Free 793 Suction Plain Catheter No. , 8 Disposable Pyrogen Free 794 Oxygen Hood For Neonates 795 T- Connector 796 Y- Connector For 8-10 Mm 797 Nasal Prongs Term & Preterm Single Patient Use With Twin Bore Nasal Pronges Sets, Extra Soft Medical Grade Nasal Tips 798 Nasal Prongs Preterm (Pead) 3.0 & 3.7 Mm - 799 Octopus Bi Connector (Length 1-10 Cm 1.5*2.5, 2-10 Cm 1.5*2.8)Pur Vol- 0.57 Ml 800 Q-Way 6 Inches ,Sterlized Using Ethylene Oxide 801 Tegaderm 2, 3/8 Inch*2.3/4 Inch 6*7 Cm Tegaderm Tm Films Iv Transparent Film Iv Transparent Film Dressing Style(Latex Free) 802 Uro Bag (Neonates)- 100 Ml 803 Dyna Plast Adhesive Tape ( 10 Cm Width, 5 Cm Length) 804 Surfactant- Survanta(Synthetic)(25 Mg/1Ml), Exosurf (Bovine) 805 Micro Drip Set 806 Transpore 2\ 807 Transpore 4\ 808 Chest Drain (Adults) 809 Disposable Needle 24 810 Anti Diptheria Serum 811 Td Vaccine 812 Erythromycin Tablet 250 Mg 813 Erythromycin Syrup 125 Mg/5 Ml, 60 Ml 814 Hepatitis B Vaccine (R Dna) I.P. 815 Urine Screening Through Dry Chemistry Rapid Testing Kit/Strips For Multiple Drug Uses:- 1. Morphine/ Opiates 2. Buprenorphine 3. Tramadol 4. D. Propoxyphene 5. Benzodiazepines Test Kit Kit 816 Nicotine Patches 817 1.Nicotine Patches 7Mg 2. Nicotine Patches 14Mg 818 Nicotine Pastilles 2 Mg 819 Nicotine Pastilles 4 Mg 820 Tablet Vareniciline 0.5Mg 821 Tablet Vareniciline 1 Mg 822 Tablet Buspirone 5 Mg 823 Anti Rabies Vaccine Through Id Route, 1 Ml Vials Vaccine 1Ml. 824 Tenofovir 300 Mg+ Lamivudine 300 Mg Tablet 825 Dolutegravir Tablet 50 Mg 826 Dual Kits For Hiv And Syphilis - 827 Levofloxacin Tablet 250 Mg 828 Pyridoxine Tablet 50 Mg 829 Moxifloxacin Tablet 400 Mg 830 Cbnaat Tb Cartridges - 831 Cbnaat-Xdr Cartriges 832 Ethambutol Tablet 100 Mg 833 Ethambutol Tablet 400 Mg 834 Ethambutol Tablet 800 Mg 835 Clofazimine Tablet 100 Mg 836 Clofazimine Tablet 50 Mg 837 Cycloserine Capsule 250Mg 838 Delamanid Tablet 50 Mg 839 Bedaquiline (Bpq) - L Tablet 840 Ethinamide Tablet 250 Mg 841 Isoniazid Tablet 100 Mg 842 Isoniazid Tablet 300 Mg 843 3 Hp Isoniazid Plus Rifapentine Fdc (300Mg/300Mg) Tablet 844 Rifapentine Tablet 150 Mg 845 Rifapentine Tablet 300 Mg 846 Rifampicin Tablet 150 Mg 847 Truenat Mtb Chips Test Kit 848 Truenat (Rip Chips) Test Kit - 849 Bbl Mgit Tubes For Use In Bactec Mgit 960 (7Ml) - 100 Tubes/Pkg Catalouge No 245122 850 Bactec Mgit 960 Supplement Kit (100 Tests, Panta And Oadc Combined) Catalogue No: 245124 Kit - 851 Bactec Mgit 960 Sire Kit. One Kit Is Sufficient For 40 Test Catalogue No: 245123 852 Genotype Mtbdr Si V2.0 96 Test 31796Am. Test Kits Composed Of 31796 A Genotype Mtbdr Si V2.0 - 853 Genotype Mtbdr Plus V2.0 30496 Am. Test Kits Composed Of 30496A Genotype Mtbdr Plus Version 2.0 And 51610 Genolyse - 854 Gt Blot 48 Reagent Kits 855 Genolyse 96 Test 51610 856 2Fdc (P) (H50 & R75) 857 3Fdc Cp (A) (H75, R150 & E275) 858 3Fdc (P) (H50, R75, Z150) 859 4Fdc (A) (H75, R150, Z400 & E275) 860 Tablet Ethambutol 100 Mg 100 Mg 861 Rifampicin Tablet 300 Mg 862 Genolyse 96 Test 51610 - 863 Early Childhood Development (Ecd) Kit For Ashas - 864 Absorbant Cotton Gauze, 90 Cm X 18 Mtrs, Is No: 758:2023, Specification Mentioned Under Mdr-2017 As Amended From Time To Time ( 1X 5 Than) 865 Cotton Bandage Cloth, 15 Cm X 5 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) 866 Cotton Bandage Cloth, 10 Cm X 4 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) 867 Cotton Bandage Cloth, 5 Cm X 4 Mtrs, Is No. 863:1988, Specification Mentioned Under Mdr-2017 As Amended Time To Time, (1 X12 Rolls) 868 Crape Bandages Bp(1 X 10 Rolls) 10 Cm X 4.5 Mtrs 869 Crape Bandages Bp(1 X 10 Rolls) 15 Cm X 4.5 Mtrs 870 Plaster Of Paris Bandages B.P. (1 X 10 Rolls) 10 Cm X 2.7 Mtrs, (High Strength) 871 Plaster Of Paris Bandages B.P (1 X 10 Rolls) 15 Cm X 2.7 Mtrs, (High Strength) 872 Cotton Wool Ip 100 Gm 873 Cotton Wool Ip 500 Gm 874 Orthopadding Cast/Zigzag Cotton Roll 4\ 875 Orthopadding Cast/Zigzag Cotton Roll 6\ 876 Disposable Syringes 2 Ml, (24G), Ribbon Pack 877 Disposable Syringes 5 Ml, (23G), Ribbon Pack, Reuse Preventable 878 Disposable Syringes 10 Ml. With Needle, Ribbon Pack 879 Disposable Syringes 2 Ml, (23G), Ribbon Pack 880 Disposable Syringes 1 Ml (23G), Ribbon Pack 881 Disposable Insulin Syringe (31G), Ribbon Pack 882 Disposable Syringe 20 Ml With Needle, Ribbon Pack 883 Disposable Syringe 50 Cc With Needle, Ribbon Pack 884 Disposable Syringes 2 Ml, (24G) Reuse Preventable 885 I.V. Canulas 24 With Luer Lock 886 I.V. Canulas 22 With Luer Lock 887 I.V. Canulas 20 With Luer Lock 888 I.V. Canulas 18 With Luer Lock 889 I.V. Canulas 16 With Luer Lock 890 I.V. Canulas 26 With Luer Lock 891 I.V.Sets Disposable With Air Vent 892 Blood Administration Set/Blood Transfusion Set. Transparent Cylindrical Drip Chamber With 200 Micron Filter. 150 Cm Long Smooth Kink Resistant Tubing. 893 Pedeatrics Iv Drip Set With Air Vent 894 Sterile Disposable Spinal Needle For Single Use 23G X 3 1/2 Inch 895 Sterile Disposable Spinal Needle For Single Use 25G X 3 1/2 Inch Clear/ Transparent Hub 896 Sterile Disposable Spinal Needle For Single Use 22 G X 3 1/2 Inch Clear/ Transparent Hub 897 Sterile Disposable Spinal Needle For Single Use 24 G X 3 1/2 Inch Clear/ Transparent Hub 898 Sterile Disposable Spinal Needle For Single Use 26 G X 3 1/2 Inch Clear/ Transparent Hub 899 Sterile Disposable Spinal Needle For Single Use 18 G X 3 1/2 Inch Clear/ Transparent Hub 900 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +17D 901 Endotracheal Tube, Cuffed No. 5.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.0Mm - 902 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +18D 903 Endotracheal Tube, Cuffed No. 6.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 6.0Mm - 904 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +19D 905 Endotracheal Tube, Cuffed No.6.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 6.5Mm - 906 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +20D 907 Endotracheal Tube, Cuffed No. 7.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 7.0Mm - 908 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +21D 909 Endotracheal Tube, Cuffed No. 7.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 7.5Mm - 910 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +22D 911 Endotracheal Tube, Uncuffed No. 4.5 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 4.5Mm - 912 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +23D 913 Endotracheal Tube, Uncuffed No. 2.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 2.5Mm - 914 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +24D 915 Endotracheal Tube, Uncuffed No. 3.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 3.0Mm - 916 Hydrophobic Acrylic Foldable Iols In Preloaded Delivery System Optical Diameter 6Mm, Overall Length 12.5 Mm To 13.0 Mm, Optic Design Biconvex, 360 Degrees Square Edge And Aspheric Optics, Dioptric Range +25D 917 Endotracheal Tube, Uncuffed No. 3.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 3.5Mm - 918 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +17D 919 Endotracheal Tube, Uncuffed No.4.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 4.0Mm - 920 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +18D 921 Endotracheal Tube, Uncuffed No. 5.0 Specification: Sterile, Single Use,Medical Grade Pvc, Transparent,Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.0 Mm - 922 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +19D 923 Endotracheal Tube, Cuffed No. 5.5 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 5.5Mm - 924 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +20D 925 Endotracheal Tube, Cuffed No. 8.0 Specification: Sterile, Single Use, Medical Grade Pvc, Transparent, High Volume Low Pressure Cuff Towards The Distal End, Kink Resistant Inflation Tube, Murphy Eye At Distal End With Polished Smoothness, Radio-Opaque Line Throughout The Length, Standard 15 Mm Connector At Proximal End. Curved Blister Pack Suiting The Magill Curve. Internal Diameter: 8.0Mm - 926 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +21D 927 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +22D 928 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +23D 929 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +24D 930 Posterior Chamber Pmma Iol Optical Diameter 5.25Mm, Overall Length 12 Mm To 12.5 Mm, Optic Design Biconvex, 360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +25D 931 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +17D 932 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +18D 933 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +19D 934 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +20D 935 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +21D 936 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +22D 937 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +23D 938 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +24D 939 Posterior Chamber Pmma Iol Optical Diameter 6Mm, Overall Length 12.5 Mm, Optic Design Biconvex,360 Degrees Posterior Square Edge And Uv Protection Should Be There, Dioptric Range +25D 940 Infant Feeding Tube 4 941 Infant Feeding Tube 5 942 Infant Feeding Tube 7 943 Infant Feeding Tube 9 944 Infant Feeding Tube, Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile, Size: 6Fg 945 Infant Feeding Tube, Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile, Size: 8Fg 946 Infant Feeding Tube:Two Lateral Eyes At Distal End, Soft, Kink Resistant Non-Toxic Pvc Tubing, Non Irritant To Delicate Mucosa, With Female Flexible Mount With In-Built Closure, Radio Opaque Line, Sterile 10 Fg 947 Ryles Tube 8 948 Ryles Tube 10 949 Ryles Tube 12 950 Ryles Tube 14 951 RyleS Tube/ Nasogastric Tube (P.V.C) With Radio Opaque Lining. Size:16, Soft , Kink Resistant Pvc Tubing For Atraumatic Intubation, Closed Distal End Should Be Coned With Radio Opaque Material For Accurate Intubation, Four Lateral Eyes For Greater Efficiency, Radio Opaque Line, Marking At 50, 60, 70 Cm From Tip, Colour Coded Funnel, With Luer Connector/Closure, Length 105 Cm 952 Mucous Suction Trap 953 Foleys Catheter 8 954 Foleys Catheter 10 955 Foleys Catheter 12 956 Foleys Catheter 18 957 Foleys Ballon Catheter 2 Way ( Silicon Elastomer ) Non- Toxic Pyrogen Free Sterile For Single Use Only , Size 14, Single Sterile Packing 958 Foleys Ballon Catheter 2 Way ( Silicon Elastomer ) Non- Toxic Pyrogen Free Sterile For Single Use Only , Size 16, Single Sterile Packing 959 Urine Bag 2000 Ml, Single Unit Packing 960 Disposable Surgical Gloves No. 6.5, Isi Mark 961 Disposable Surgical Gloves No. 7, Isi Mark 962 Disposable Surgical Gloves No. 7.5, Isi Mark 963 Disposable Surgical Gloves No.6 , Isi Mark 964 Examination Gloves (Medium Size), Isi Mark 965 Micropore/Surgical Paper Tape 25Mm X 9.1Mtr. 966 Micropore/Surgical Paper Tape 50Mm X 9.1 Mtr. 967 Micropore/Surgical Paper Tape 75Mm X 9.1 Mtr. 968 Disposable Shoe Cover 969 Disposable Mask 970 Disposable Cap 971 Sterile Cord Clamp Non Toxic, Pyrogen Free Sterile For Single Use Only Single Unit Packing 972 Ecg Electrodes (Disposable Kit) Pack Of 6 973 Ot Sponges With Radio-Opaque Thread (With 8 Layers 30 Cm X 30 Cm ) 974 Carbolic Acid 400 Ml 975 Opsite Eye Drape Sheet With Drain Pouch 70 Cm X 70 Cm 976 Blades For Eye Surgery Crescent 977 Blades For Eye Surgery Side Port 15° 978 Blades For Eye Surgery Keratones 2.8 Mm 979 Blades For Eye Surgery Implant 5.2 Mm 980 Karman/ Mtp Cannula No. 6, Single Unit 981 Karman/ Mtp Cannula No. 7, Single Unit 982 Karman/ Mtp Cannula No. 8, Single Unit 983 Mr Cannula No. 5 984 Mr Cannula No. 6 985 Mr Cannula No. 7 986 Mr Cannula No. 8 987 Disposable Sterile ,Powder Free Gloves For Eye Surgeries Surgical Gloves 6.5 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 6.5 988 Disposable Sterile, Powder Free Gloves For Eye Surgeries Surgical Gloves 7 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 7 989 Disposable Sterile, Powder Free Gloves For Eye Surgeries Surgical Gloves 7.5 No, Latex, Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) Size 7.5 990 Ecg Paper 215 Mm*20 Mtr, Roll 991 Ecg Paper 50 Mm*20 Mtr, Roll 992 Ecg Paper 50 Mm*30 Mtr, Roll 993 Ecg Paper 60 Mm* 15 Mtr, Roll 994 Ecg Roll Big 995 Ecg Roll Small 996 Ecg Jelly 200 Ml Bottle 997 Ultrasound Jelly 200 Ml Bottle 998 Absorbable Gelatin Sponge, 80 X 50X 10 Mm, Single Unit 999 Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 6 Cm X 11 Cm (3 To 6 Units Of Mesh In One Box). 1000 Macroporus Partially Absorbable Mesh With Polypropylene And Polyglecaprone 15 Cm X 15 Cm (3 To 6 Units Of Mesh In Each Box) 1001 Multilayer Tissue Seprating Polyglecaprone Mesh (Polydioxanone And Macroporous Polypropylene) 10Cm X 15 Cm Oval (1 Foil In Each Box) For Lap Of Hernia (Should Be Antibacterial) 1002 Multilayer Tissue Separating Mesh With Polypropylene/Polyster And Polydioxanone /Collegen. 15Cm X 15 Cm Square /Circular 1003 Surgical Spirit Bp 500 Ml 1004 Sodium Hypochlorite Solution 10% 1005 Acetone 400 Ml 1006 Dodecylbispropylene Triamine 9.2Gm, Didecyldimethyl Ammonium Chloride 13.0 Gm For Fogging 1007 Ortho-Phthaldehyde 0.55% W/W Solution For Sterlization, 5 Liter 1008 Potassium Peroxomonosulphate 50% W/W Containig Aldehyde Free Disinfectant , 5 Kg 1009 Dark Eye Glasses 1010 Disposable Eye Patch 1011 I.O Dye (Rhex Id Dye) Each (Indigo Blue Dye) 1012 Surgical Blades11 (Pack Of 100) 1013 Surgical Blades15 (Pack Of 100) 1014 Surgical Blades20 (Pack Of 100) 1015 Surgical Blades23 (Pack Of 100) 1016 Surgical Blades 24 (Pack Of 100) 1017 Oxygen Venti-Mask (Pvc/Disposable)Adult 1018 Oxygen Venti-Mask (Pvc/Disposable)Medium 1019 Oxygen Venti-Mask (Pvc/Disposable)Paed. 1020 Nebulisation Set (Mask With Tubing With Chamber (Adult ) 1021 Nebulisation Set (Mask With Tubing With Chamber (Paediatric ) 1022 Diaper Paediatric (Extra Small Size For Neonates) 1023 Disposable Adhesive Cannula Fixator 1024 Patient Identification Band Mother & Child Size (Different Colours) 1025 Patient Identification Band Adult Size (Different Colours) 1026 Patient Identification Band Paediatric Size (Different Colours) 1027 Suction Catheter No. 10 , Single Unit 1028 Suction Catheter No. 16 , Single Unit 1029 Negative Suction Drain/Closed Round Drain 12 1030 Negative Suction Drain No.14 1031 Negative Suction Drain No. 16 1032 Disposable Plastic Urine Pan 1033 Disposable Plastic Bed Pan 1034 Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 5X 6 Cm 1035 Moisture Responsive With High Mvtr Grid Pattern Acrylic Adhesive Film With Non Woven Port Size 7X 9 Cm 1036 Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 6.5 Cm X 5 Cm (Pack Of 100) 1037 Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 15.5 Cm X 8.5Cm (Pack Of 100) 1038 Grid Pattern Acrylic Adhesive Film With Low Adherent Pad Having Mesh 25 Cm X 10 Cm , (Pack Of 100) 1039 Skin Stapler Standard ( Single Unit) 1040 Airway Set Size 2, ( Single Unit) 1041 Airway Set Size 3, ( Single Unit) 1042 Airway Set Size 4, ( Single Unit) 1043 Airway Set Size 5, ( Single Unit) 1044 Ambu Bag Adult, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 7 K Pa ( 70 Cm H2O Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 1300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) 1045 Ambu Bag Ped, It Should Be Double Layered Resuscitator Within Built Pressure Limiting System That Prevents Airways Pressure From Exceeding 4 K Pa ( 40 Cm H2O Without Loss Of Valume. It Should Be Supplied With Reusable Transparent Breathing Face Mask , It Should Have Tidal Volume Max 300 Ml It Should Be Usfda And Iso/Ce Certified. (Single Unit) 1046 Courtery Lead ( Single Unit) 1047 Coutery Pad (Single Unit) 1048 Lega Clip Size Lt 300 (Titanium Ligating Clips Medium Size Having Lateral And Transverse Grooves On The Inner Clips), (Single Unit) 1049 Lega Clip Size Lt 400 (Titanium Ligating Clips Large Size Having Lateral And Transverse Grooves On The Inner Clips), (Single Unit) 1050 Shoulder Immobilizer Standard 1051 Pouch Arm Sling Standard 1052 Centre Line 1053 Cervical Collar Small Size (Soft) 1054 Cervical Collar Medium Size (Soft) 1055 Cervical Collar Large Size (Soft) 1056 Hard Cervical Collar (Universal) Size 1057 Chest Drain Catheter No.12 1058 Chest Drain Catheter No.14 1059 Chest Drain Catheter No.28 1060 Chest Drain Catheter No.32 1061 Chest Tube Drainage With Water Seal Bag No.28 1062 Chest Tube With Water Seal No.32 1063 Dj Stunt 1064 Dj Stunt No.5.5 1065 Dj Stunt No. 6 French End Closed 1066 Dj Stunt No 5/26 Both End Open 1067 Dj Stunt No 6/26 Both End Open 1068 Epidural Set 1069 Guide Wire Teflon Coated J Tip 1070 Guide Wire Teflon Coated V Straight Tip 1071 Spc Set (Suprapubic Catheter Set) 1072 Turp Loop 1073 Skin Traction Set Standard Size 1074 I.V. Flow Regulator Extension Sets 1075 Blades For Eye Surgery Keratones 3.2 Mm 1076 Balance Salt Solution (Bss For Eye Surgery) 500 Ml 1077 Craner Wire Splint 1078 Air Mattress 1079 Bb Splint (Bohler- Braun) 1080 Bed Side Pulley 1081 Skeletal Traction 1082 Disposable Needle 16 1083 Disposable Needle 23 1084 Disposable Needle 26 1085 Pmo Line 1086 Troponin T, Sensitivity:-Not Less Than 95.8%, Direct Whole Blood Test Kit 1087 3D Mesh For Lap Ingunal Hernia A)Right Side B)Left Side - 1088 Partial Absorble (10X6 Cm)Vicryl Mesh For Ipom 1089 Tackers For Mesh Fixation (Non Absorable) 1090 Measured Volume Fluid Infusion Set With 110Ml/150Ml Chamber - 1091 Medical X-Ray Films(1X50) 8\X10\ 1092 Medical X-Ray Films(1X50) 10\X12\ 1093 Medical X-Ray Films(1X50) 12\X15\ 1094 Medical X-Ray Films(1X50) 14\X14\ 1095 Medical X-Ray Films(1X50) 14\X17\ 1096 Agfa Cr Film (Dt2B)(1X100) 8\X10\ 1097 Agfa Cr Film (Dt2B)(1X100) 10\X12\ 1098 Agfa Cr Film (Dt2B)(1X100) 11\X14\ 1099 Agfa Cr Film (Dt2B)(1X100) 14\X17\ 1100 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle 1101 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle 1102 Catgut Suture (Chromic Catgut)Usp 1, 76 Cm X 63 Mm, 3/8 Circle (12 Foils In Each Box) Round Body Needle - 1103 Chromic Catgut Absorbable Suture Usp 1,76Cm Length 1/2 Circle 40Mm, Round Body Needle (12 Foils In Each Box) 1104 Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle 1105 Silk Sutupak Usp 1, 75 Cm (12 Foils In Each Box) 1106 Silk Suture Usp 0, 76Cm X 45 Mm , 3/8 Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) 1107 Silk Suture Usp 3-0, 90 Cm X 16 Mm , 3/8 Circle Type Of Needle- Cutting (12 Foils In Each Box) 1108 Polyglactin (Violet) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box)Should Be Antibacterial 1109 Polyglactin (Violet) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) Should Be Antibacterial 1110 Polyglactin (Violet) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box)Should Be Antibacterial 1111 Polyglactin (Plain) Vicryl Usp-1, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle Reverse Cutting - 1112 Polyglactin Synthetic Braided Absorbable Suture, Usp-1, 90Cm Length, Violet 1/2 Circle 40Mm Round Body Needle (12 Foils In Each Box) 1113 Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1114 Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied (12 Foils In Each Box) 1115 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle (12 Foils In Each Box) 1116 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body (12 Foils In Each Box) 1117 Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1118 Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) 1119 Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle.Should Be Antibacterial. 1120 Knotless Control Device Polygecaprone 3/8 Circle Reverse Cutting Needle 24 Mm Spril Unidireectional 30Cm With Antibactreal Triclosan Coated 3/0 - 1121 Knotless Control Device Polygecaprone 1/2 Circle , 40 Mm ,Taper Point,Ct,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 1/0 - 1122 Knotless Control Device Polygecaprone 1/2 Circle , 36 Mm ,Taper Point,Ct,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 1 1123 Knotless Control Device Polygecaprone 1/2 Circle , 26 Mm ,Taper Point,Sh,Unidirectional With Fixation Tab 30Cm With Antibactreal Triclosan Coated 2/0 1124 Silver Alloy Non-Gamma-2 Lathe Cut Alloy 1125 Mercury Pure Triple Distilled 1126 Cavity Varnish 5% Sodium Fluoride 1127 Calcium Hydroxide, Powder 1128 Topical Fluoride Apf Gel 1.25% 1129 Gum Paint 1130 Edta 17 % Paste Form. 1131 Pulp Devitalizer 1132 Rubber Dam Kit 1133 Air- Rotor Diamond Burs No. 1 (Inverted Bur) 1134 Air- Rotor Diamond Burs No. 1 (Straight End Taper) 1135 Air- Rotor Diamond Burs No. 1 (Round) 1136 Air- Rotor Diamond Burs No. 1 (Straight) 1137 Air- Rotor Diamond Burs No. 1 (Flame) 1138 Air- Rotor Diamond Burs No. 2 (Inverted Bur) 1139 Air- Rotor Diamond Burs No. 2 ( Straight End Taper) 1140 Air- Rotor Diamond Burs No. 2 (Round) 1141 Air- Rotor Diamond Burs No. 2 (Straight) 1142 Air- Rotor Diamond Burs No. 2 (Flame) 1143 Air- Rotor Diamond Burs No. 3 (Inverted Bur) 1144 Air- Rotor Diamond Burs No. 3 ( Straight End Taper) 1145 Air- Rotor Diamond Burs No. 3 (Round) 1146 Air- Rotor Diamond Burs No. 3 (Straight) 1147 Air- Rotor Diamond Burs No. 3 (Flame) 1148 K-Files - Size- 15-40 , Length:-21 Mm , Should Have Rubber Stopper 1149 K-Files - Size- 15-40 , Length:-25 Mm , Should Have Rubber Stopper 1150 K- Files Size- 45-80, Length:-25 Mm, Should Have Rubber Stopper 1151 K-Files Size- 6, Length :- 21 Mm , Should Have Rubber Stopper. 1152 K-Files Size- 6, Length :- 25 Mm , Should Have Rubber Stopper. 1153 K-Files Size- 8, Length :- 21 Mm , Should Have Rubber Stopper. 1154 K-Files Size- 8, Length :- 25 Mm , Should Have Rubber Stopper. 1155 K-Files Size- 10, Length :- 21 Mm , Should Have Rubber Stopper. 1156 K-Files Size- 10, Length :- 25 Mm , Should Have Rubber Stopper. 1157 Niti Hand Files (21 Mm) Size- 15-40, For Curved Canals 1158 H-Files , Size-15-40 , Length :-21 Mm, Should Have Rubber Stopper 1159 H-Files , Size-45-80, Length :-25 Mm Should Have Rubber Stopper 1160 Matrix Strips,Made From A Thin, Strong, Flexible, Transparent Material Such As Mylar 1161 Barbed Broaches , Made Of Stainless Steel, Can Be Sterilized Length ‰¥ 21 1162 Articulating Paper Strip, Red Colored With Sufficient Thickness Double Side 1163 Articulating Paper Strip, Blue Colored With Sufficient Thickness Double Side 1164 Matrix Band Retainer , No. 1 1165 Matrix Band Retainer , No.8 1166 Matrix Band , No. 1, Toflemire 1167 Matrix Band , No. 8, Toflemire 1168 Paper Point 25 1169 Paper Point 30 1170 Paper Point 35 1171 Mini Plates Isi/ Iso/Ce/Marked. 1172 Arch Bar Length 1Feet Isi/ Iso/Ce/Marked. 1173 Air Rotor Cartridges (Nsk) Supertorque, Standard Head Isi/ Iso/Ce/Marked. 1174 Composite Finishing Kit- Disc Type 1175 Composite Finishing Kit With 12 To 24 Finishing Point Of Different Shapes. The Durable Abbresive Points Are Autoclavabal And Cost Effective, Comprehensive Selection Of Plain For Finishing And Polishing In One Kit, For Fast And Efficient Finishing The Use Of Conjunction With The Composite Polishing Kit, Average Speed 5000 To 12000 Rpm Kit - 1176 Iopa Film Size 30 Mm X 40 Mm 1177 Iopa Film Size 31 Mm X 41Mm 1178 Formocresol Formalin, Cresol Glycerin ,Formocresol Formalin Bp 20% V/V , Cresol Ip 32% V/V , Glycerin Ip Qs 1179 Dental Chair Covering Sterilized Cling Foil Rolls Isi/ Iso/Ce/Marked. 1180 Small Cotton Rolls For Isolation Isi/ Iso/Ce/Marked(Length-37Mm, Dia-8-10Mm) 1181 Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Pale Yellow Powder & Liquid 15Gm Powder & 10 To 13 Liquid 1182 Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Yellow Brown Powder & Liquid 15Gm Powder & 10 To 13 Liquid 1183 Restroative Cement Type - Ii - (15 Gm Powder & 10 To 13 Gm Liquid), Strontium Based, Radiopaque Glass Ionomer With High Fluoride Release, Resistant To Demineralization,Hydrophylic Properties, Flouride Releasing, High Compressive Stregth, Low Solubility, Low Flexure Strength, Bonds To Both Dentin And Enamel. Shade :- Dark Grey Powder & Liquid 15Gm Powder & 10 To 13 Liquid 1184 Pit & Fissure Sealant ( 6 Ml Bottle) Solution With High Flouride Releasing, Low Viscocity, High Retention, Rapid Cure & Low Solubility Liquid 6 Ml 1185 Calcium Hydroxide , Paste System Based And Catalyst -Radiopaque, 4 Gm Paste 4 Gm 1186 Zinc Phosphate Cement , 20 Gm Powder And 10 Ml Liquid Powder & Liquid 20 Gm Powder And 10 Ml Liquid 1187 Glass Ionomer Cement- Type-Ix, High Strenth For Posterior Teeth, Chemical Setting Without Shrinkage, Strontium Based, High Flouride Releasing, 12 To 15 Gm Powder And 5 To 10 Gm Liquid Powder & Liquid 12 To 15 Gm Powder & 5 To 10 Ml Liquid 1188 Hybrid Composite Resin For Anteriors (All Shades), High Strength, Long Lasting Wear Resitance, Great Handling Without Stick, 4 Gm Isi/ Iso/Ce/Marked. 4 Gm 1189 Mineral Trioxide Aggregate, 0.5 Gm Isi/ Iso/Ce/Marked. 0.5 G 1190 Flowable Composite 2 Mg Syringe, Flowable Consistancy Thicsotrophic, Low Shrinkage, Radiopaque, Easily Polishability, Should Be Hybrid, Wear Resistance, Syringe Design To Eleminate Bubbles 2 Mg 1191 Niti Rotory Files 4%, 21 Mm (Pkt Of 6) Refill Pack Of(#15,#20,#25,#30,#35,#40) 21 Mm 1192 Niti Rotory Files 4%, 25 Mm (Pkt Of 6) Refill Pack Of (#15,#20,#25,#30,#35,#40) 25 Mm 1193 Niti Rotory Files 6%, 21 Mm (Pkt Of 6) Refill Pack Of( #15,#20,#25,#30,#35,#40) 21 Mm 1194 Niti Rotory Files 6%, 25 Mm (Pkt Of 6) Refill Pack Of( #15,#20,#25,#30,#35,#40) 25 Mm 1195 Crown Cutting Kit, Set Of 14 Burs - 1196 Adhesive Resin Cement (Dual Lock Composite Resin Cement), 4.5 Gm Isi/Iso/Ce Marked Cement 4.5 Gm 1197 Etchant 37% Phosphoric Acid ( 9 Ml Syringe) Solution 1198 Root Canal Spreader 15-40, 21 Mm Isi/Iso/Ce Marked 1199 Root Canal Spreader 15-40, 25 Mm Isi/Iso/Ce Marked 1200 Gutta Percha Point No. 20, Isi/Iso/Ce Marked 1201 Gutta Percha Point No. 25, Isi/Iso/Ce Marked 1202 Gutta Percha Point No. 30, Isi/Iso/Ce Marked 1203 Gutta Percha Point No. 15-40, Isi/Iso/Ce Marked 1204 Gutta Percha Point No. 45-80, Isi/Iso/Ce Marked 1205 Absorbent Point No.15-40, Isi/Iso/Ce Marked Packet Of 200 1206 Absorbent Point No.45-80, Isi/Iso/Ce Marked Packet Of 200 1207 Stainless Steel Wire 26G. Soft Isi/Iso/Ce Marked 1208 Gates Glidden Drill No.1 1209 Gates Glidden Drill No.2 1210 Gates Glidden Drill No.3 1211 Pillow Cover Cotton Size:48 X 70 Cm, Color - Violet 1212 Pillow Cover Cotton Size:48 X 70 Cm, Color - Indigo 1213 Pillow Cover Cotton Size:48 X 70 Cm, Color - Blue 1214 Pillow Cover Cotton Size:48 X 70 Cm, Color - Green 1215 Pillow Cover Cotton Size:48 X 70 Cm, Color - Yellow 1216 Pillow Cover Cotton Size:48 X 70 Cm, Color - Orange 1217 Pillow Cover Cotton Size:48 X 70 Cm, Color - Peach 1218 Bed Sheet Size-150 X 240 Cm, Color:Violet 1219 Bed Sheet Size-150 X 240 Cm, Color:Indigo 1220 Bed Sheet Size-150 X 240 Cm, Color:Blue 1221 Bed Sheet Size-150 X 240 Cm, Color:Green 1222 Bed Sheet Size-150 X 240 Cm, Color:Yellow 1223 Bed Sheet Size-150 X 240 Cm, Color:Orange 1224 Bed Sheet Size-150 X 240 Cm, Color:Peach 1225 Ot Linen Poplin- Green Color, Size : 90 X 90 1226 Ot Linen Poplin- Green Color, Size : 90 X 140 1227 Ot Linen Poplin- Green Color, Size : 140 X 210 1228 Ot Linen Poplin- Green Color, Size : 90 X 90 (With Oval) 1229 Ot Linen Poplin- Green Color, Size : 90 X 140 (With Circular Hole Of Size 10€ Diameters In Centers Green Color) 1230 Ot Linen Poplin- Green Color, Size : 130 X 180 (With Circular Hole Of Size 10€ Diameters In Centers Green Color) 1231 Ot Linen Cotton White 88X88 Cm. With Hole Size 9 X 10 Cm. In Centre And Should Be Folded And Stitched So There Are No Loose Ends. 1232 Ot Gown Poplin Length 130 X 135 Cms Arm’S Length 58 X 60 Back Open Type With Provision Of Tying With String At Back Arm Should Have Elasting Cuff Or Cord For Tying At Cuff End. The Inside Of Gown Should Be Inter Lock So That There Are No Loose Threads 1233 Patient Dress Kurta Payjama (Striped Blue) Small. Kurta Length 70 X 80 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1234 Patient Dress Kurta Payjama (Striped Blue) Medium. Kurta Length 80 X 90 Cms Arm Length 22X 24 Cms.V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1235 Patient Dress Kurta Payjama (Striped Blue) Large. Kurta Length 100 X 105 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1236 Doctor Dress Kurta Payjama (Blue) Small. Kurta Length 70 X 80 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1237 Doctor Dress Kurta Payjama (Blue) Medium. Kurta Length 80 X 90 Cms Arm Length 22X 24 Cms.V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1238 Doctor Dress Kurta Payjama (Blue) Large. Kurta Length 100 X 105 Cms Arm Length 22X 24 Cms. V Shaped Neck Front With Buttons. Pajama Length 100 X 105 Cms (Poplin) 1239 Towel 56 X 115 Cms. White Color 1240 Dental Sheet Green Cotton 45 X 45 Cms. 1241 Aprons (Lab Coats ) (Small) Full Size, Full Sleeves 1242 Aprons (Lab Coats) (Medium) Full Size, Full Sleeves 1243 Aprons (Lab Coats) (Large) Full Size, Full Sleeves 1244 Legging Each Leg Poplin 40 X 40 Cms. Green Color Bottom Closed 1245 Drape Sheet For Cssd 2 X2 Mtr. Cotton Cloth Grey Color 1246 Kurta, Petticoat Sets Large Size , Green Strip 1247 Glass Lonomer Silver Reinforced Isi/Iso/Ce Marked 1248 Glass Lonomer Luting Cement Isi/Iso/Ce Marked 1249 Rubber Dam Sheet Isi/Iso/Ce Marked 1250 Sterilization Rolls For Packing Instrument 15Cm X 200Mtrs 1251 Collagen Membrane-Sterile Bioresorbable Gtr Collagen Membrane Isi/Iso/Ce Marked 1252 6% Taper Gutta Percha Size 25 1253 6% Taper Gutta Percha Size 30 1254 6% Taper Gutta Percha Size 35 1255 6% Taper Gutta Percha Size 40 1256 4% Taper Gutta Percha Size 25 1257 Esthetic Fiber Post System 1258 Pre Fabricated Metallic Post ( Cemented) 1259 Pre Fabricate Metallic Post (Threaded) 1260 Rubber Base Impression Material Addition Silicone Putty With Compatible Light Body 600-900Ml Putty With 50 Ml Light Per 300Ml Of Putty Isi/Iso/Ce Marked 1261 Retraction Cord (Assorted Size Isi/Iso/Ce Marked 1262 Bone Graft Material For Dental Purpose Isi/Iso/Ce/Marked 1263 Surgical Bur Straight Fissure Carbide 1 Mm Isi/Iso/Ce/Marked 1264 Surgical Bur Straight Fissure Carbide 1.5 Mm Isi/Iso/Ce/Marked 1265 Surgical Bur Straight Fissure Carbide 2 Mm Isi/Iso/Ce/Marked 1266 Resin Cement Isi/Iso/Ce Marked 1267 Preadjusted Edgewise Stainless Steel Brackets Kit Containing Upper & Lower 2Nd Premolar To 2Nd Premolar Bondable Brackets With Upper Triple And Lower Double Weldable Buccaltubes,With Roth And Mbt Prescription And 0.022€And 0.018€ Slot (Leone/American Orth 1268 Ni Ti Preformed Orthodontic Wire Round - 014 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1269 Ni Ti Preformed Orthodontic Wire Round - 016 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1270 Ni Ti Preformed Orthodontic Wire Round - 018 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1271 Ni Ti Preformed Orthodontic Wire Round - 020 Inch Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1272 Ni Ti Preformed Orthodontic Wire Rectangular -016X022 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1273 Ni Ti Preformed Orthodontic Wire Rectangular -017X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1274 Ni Ti Preformed Orthodontic Wire Rectangular -019X025 Dimension (Leone/American Orthodontics/Tp Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1275 Stainless Steel Preformed Orthodontic Wire Round 014 Inch (Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1276 Stainless Steel Preformed Orthodontic Wire Round 016 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1277 Stainless Steel Preformed Orthodontic Wire Round 018 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1278 Stainless Steel Preformed Orthodontic Wire Round 020 Inch(Leone/American Orthodontics /Tp Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1279 Stainless Steel Preformed Orthodontic Wire Rectangular 016X022 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1280 Stainless Steel Preformed Orthodontic Wire Rectangular 017X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1281 Stainless Steel Preformed Orthodontic Wire Rectangular 019X025 (Leone/American Orthodontics/T.P Orthodontics/Ormco/3M Unitek)Isi/Iso/Ce Marked 1282 Blue Elastic Separators ( Leone/ American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1283 Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Short Types Isi/Iso/Ce Marked 1284 Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Long Types Isi/Iso/Ce Marked 1285 Elastic E Chains (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Continous Types Isi/Iso/Ce Marked 1286 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Yellow Isi/Iso/Ce Marked 1287 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Blue Isi/Iso/Ce Marked 1288 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Green Isi/Iso/Ce Marked 1289 Intra Oral Elastics (Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Red Isi/Iso/Ce Marked 1290 Colourless O Rings (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1291 Expansion Screw 3 Pin (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1292 Preformed Molar Bands Without Buccal Tubesisi/Iso/Ce Marked 1293 Bioplast Sheets Proprietary Item 2 Mm Thickness Isi/Iso/Ce Marked 1294 Bioplast Sheets Proprietary Item 3 Mm Thickness Isi/Iso/Ce Marked 1295 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 19 Gauge Isi/Iso/Ce Marked 1296 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 20 Gauge Isi/Iso/Ce Marked 1297 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 21 Gauge Isi/Iso/Ce Marked 1298 Stainless Steel Wire Spool ( Leone / Konark/Ss White) 23 Gauge Isi/Iso/Ce Marked 1299 Tma Wire Lengths Rectangular - 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1300 Tma Wire Lengths Rectangular - 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1301 Tma Wires Preformed Rectangular- 017 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1302 Tma Wires Preformed Rectangular- 019 X 025 Dimension (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marked 1303 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 6Mm Isi/Iso/Ce Marked 1304 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 7Mm Isi/Iso/Ce Marked 1305 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 8Mm Isi/Iso/Ce Marked 1306 Orthodontic Micro Implants ( Leone /Dentos/T.P Orthodontics/Ormco/3M Unitek } 10 Mm Isi/Iso/Ce Marked 1307 Forsus Fatigue Resistant Device( 3 M Unitek ), Proprietary Itemisi/Iso/Ce Marked 1308 Powerscope 2 (American Orthodontics Proprietary Item)Isi/Iso/Ce Marked 1309 Etchant 37% Phosphate Acid In Gel Form 2-4 Gm, Isi/Iso/Ce Marked 1310 Loose Preadjusted Edgewise Mbt Bracket 022 Slot Isi/Iso/Ce Marked Per Bracket 1311 Bondable Buccal Tubes Upper And Lower Right And Left 1St Molars .022€ Mbt With Upper Triple And Lower Double Slot (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1312 Bondable Buccal Tubes Upper And Lower Right And Left 2Nd Molars .022€ Mbt (Desires/ Leone / American Orthodontics/T.P Orthodontics/Ormco/3M Unitek) Isi/Iso/Ce Marked 1313 Ni-Ti Open Coil Spring0 10€X 030 (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek)Isi/Iso/Ce Marke 1314 Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 9Mm Isi/Iso/Ce Marked 1315 Niti Closed Coil Springs With Hooklets (Leone / American Orthodontics/T.P Orthodontics/Ormco /3M Unitek 12Mm Isi/Iso/Ce Marked 1316 Eugenol 110 Ml Isi/Iso/Ce Marked 1317 Zinc Oxide Powder 110 Gram Isi/Iso/Ce Marked 1318 Naoci 5.25% Solution Isi/Iso/Ce Marked 1319 Fiber-Reinforced Splinting Material- Bondable Reinforced Ribbon Fiber-Approx. 2Mm Width Isi/Iso/Ce Marked 1320 Fixer & Developer Solution Set (Manual) To Make 13.5 Lt Solution Each Of Fixer And Developer Isi/Iso/Ce Marked 1321 Air Rotor Spray Isi/Iso/Ce Marked Bottle 1322 Disposable Patient Drape Sheets Size 1X1 Mtrs. 1323 Single Use Syringes 10 Ml With Needle 23 G. X 1€ Length Sterile Isi/Iso/Ce Marked 1324 Single Use Syringes 5 Ml With Needle 23 G. Sterile 1€ Length Isi/Iso/Ce Marked 1325 Single Use Syringes 2 Ml With Needle 23 G. Sterile 1€ Length Isi/Iso/Ce Marked 1326 Single Use Insulin Syringes With Needle Sterile Isi/Iso/Ce Marked 1327 B.P. Blade Size 11 Isi/Iso/Ce Marked 1328 B.P. Blade Size 15 Isi/Iso/Ce Marked 1329 B.P. Blade Size 23 Isi/Iso/Ce Marked 1330 Silk Suture Material (3-0) 1331 N-95 Respirator Mask(Covid) 1332 Ppe Kit(Covid) 1333 Vtm Media(Covid) 1334 Triple Layer Mask(Covid) 1335 Hydroxy Chloroquine Tablet 200 Mg(Covid) 1336 Lysol(5L)(Covid) 1337 Sodium Hypochlorite(5L)(Covid) 1338 Oxygen Cylinder(Covid) 1339 Real Time Pcr Kit(Covid) 1340 Covid19 Igm/Igm Rapid Test (Wondfo Sars-Cov-2 Antibody Test)(Covid) 1341 Dead Body Cover(Covid) 1342 Rapid Screening Kits For Covid-19 Test(Covid) 1343 Denture Spirit-Surgical Spirit With Methyl Salicylate, Diethyl Phthalate And Caster Oil Dentured Alchol, 500 Ml Bottle(Covid) 1344 Disposable Bed Sheet(Covid) 1345 Thermal Scanner(Covid) 1346 Tab Levocetrizine 5 Mg(Covid) 1347 Spun Bond Non-Woven 3 Ply Face Covers(Covid) 1348 Magna Pure 24 Total Na Isolation Kit, Pack Size-96(Covid) 1349 Magna Pure 24 Processing Cartridge, Pack Size-48(Covid) 1350 Magna Pure 24 Tip Ptark (Comes With Pierecing Tools)Pack Size-48(Covid) 1351 Magna Pure Tip 1000 Ul, Pack Size-3840(Covid) 1352 Framestrips With Flat Caps High Profile, Pack Size-120(Covid) 1353 Magna Pure Sealing Foil,Pack Size-100(Covid) 1354 Mplct Na Isolation Kit- Lysis/ Binding Buffer Refill, Pack Size-100Ml(Covid) 1355 Handsanitizer (500 Ml)(Covid) 1356 Framestrip With Flat Caps-Low Profile(Covid) 1357 Magna Pure 96 External Lysis Buffer(Covid) 1358 Light Cycler -480 Multiwell 11 Plate 96(Covid) 1359 Light Cycler 8-Tube Strip Adapter Plate(Covid) 1360 Manual Rna Extraction Kit-50 Test(Covid) 1361 Oseltamivir 75 Mg 1362 Covid Kavachâ„¢ Anti- Sars Cov-2 Igg Antibody Detection Elisa (96 Micro Well Coated Plate 1363 Tocilizumab Injection 400 Mg/20 Ml(Covid) 1364 Standard Q Covid19,Ag Test(Rapid Antigon Test) 1365 Lc Prep Lysi/Bind Buff Dna,Mbp 1366 Ramdesivir Injection 100Mg 1367 Hydroxychlorine Tablet 400 Mg(Covid) 400 Mg 1368 Dexamethasone 6 Mg Tablet(Covid) 6 Mg 1369 Enoxaparin 40 Mg Injection(Covid) 40 Mg 1370 Favipiravir(Covid) 400 Mg 1371 Coronil Kit Coronil Kit Each Contains(80Tab+80Tab+20Ml) 1372 Ayush Kwath Powder 1373 Amphotericin B Powder For Injection 50 Mg Liposomal Complex,Vial Injection Powder 50Mg/Ml, 10Ml Vial 1374 Tocilizumab 80 Mg 1375 Oxygen Regulator With Humidifier Bottle,Rotameter And Key For B And D Type Cylinders 1376 Disposable Ad Syringes 0.5Ml. 1377 Nitrile Gloves(Large Size),Purple,Powder Free,Box Of 100 Pcs 1378 Nitrile Gloves(Medium Size),Purple,Powder Free,Box Of 100 Pcs 1379 Nitrile Gloves(Small Size),Purple,Powder Free,Box Of 100 Pcs 1380 Tablet Posaconazole 100 Mg 1381 Intravenous Immunoglobulin(Ivig) 10 Gm,100 Ml Bottle 1382 Sars-Cov-2 Sequencing Kits Test Kit Kit 1383 Corbevax Vaccine,10 Ml Vial 1384 Zinc Oxide Cream 10% 10 Gm 1385 Zinc Oxide Powder 100 Gm 1386 Zinc Phosphate Cement , Powder And Liquid 1387 Zinc Sulphate Dispersible Tablet 20 Mg 1388 Zinc Sulphate Syrup 60 Ml 1389 Zoledronic Acid Injection 4 Mg 1390 Balloon Tamponade (Standard Size) 1391 Miracle Mix(Standard Size) 1392 Bonding Agent 1393 Endo Files(Standard Size) 1394 Orafill(Standard Size) 1395 Pain Off(Standard Size) 1396 Composite Syringes A1(Standard Size) 1397 Composite Syringes B1(Standard Size) 1398 Lignocaine Spray 1399 Dycal(Standard Size) 1400 Metapex(Standard Size) 1401 Restoration Bonding Agent 1402 Mixing Pad(Standard Size) 1403 Coe-Pack(Standard Size) 1404 Temephos 50% 1 Ltr 1405 Pyrazinamide 500 Mg Tablet 1406 Pyrazinamide 750Mg Tablet 1407 Rifampicin 150 Mg Capsule 1408 Rifampicin 300 Mg Capsule 1409 Rifampicin 450 Mg Capsule 1410 Isoniazid 300 Mg Tab. 1411 Isoniazid 100 Mg Tab. 1412 Ethanbutol 800 Mg Tab. 1413 Ethanbutonl 400 Mg. Tab. 1414 Ethanbutol 100 Mg Tab. 1415 4 Fdc (A) 1416 3 Fdc (A) 1417 Inj. Streptomycetin 0.75 Gm 1418 3 Fdc Ped. (P) 1419 2 Fdc Ped. (P) 1420 Pas Poder 1421 Iec Jel Pack 1422 Tharmocal Box 1423 Falcon Tube 50 Ml 1424 Tab. Pyridoxin 50 Mg 1425 Inj. Kanamicine 18 M 1426 Tab. Cyclocerin 500 Mg 1427 Tab. Cyclocerin 250 Mg 1428 Tab. Ethonamlde 250 Mg 1429 Tab. Uvezolld 1430 Tab. Clofazimine 100 Mg 1431 Tab. Coprpcomycine 1 Mg 1432 Tab. Delamanid 50 Mg 1433 Tab. Moxifloxacin 400 Mg 1434 Multi Drug Urine Screen Kits 1435 Cotton Bandages(1 X 12 Rolls) 10 Cm X 4 Mtrs 1436 Cotton Bandages(1 X 12 Rolls) 15 Cm X 5 Mtrs 1437 Cotton Bandages(1 X 12 Rolls) 5 Cm X 4 Mtrs 1438 Cotton Gauze Cloth(1 X 5 Than) 90 Cm X 18 Mtrs 1439 Cotton Wool Ip 100 Gm 1440 Cotton Wool Ip 500 Gm (Net) 1441 Cotton Wool Ip 500 Gm 1442 Disposable Cap 1443 Disposable Surgical Gloves No. 6.5, Isi Mark 1444 Disposable Surgical Gloves No. 7, Isi Mark 1445 Disposable Surgical Gloves No. 7.5, Isi Mark 1446 Disposable Surgical Gloves No.6 , Isi Mark 1447 Disposable Syringe 20 Ml With Needle, Ribbon Pack 1448 Disposable Syringe 50 Cc With Needle, Ribbon Pack 1449 Disposable Syringes 1 Ml (23G), Ribbon Pack 1450 Disposable Syringes 10 Ml. With Needle, Ribbon Pack 1451 Disposable Syringes 2 Ml, (23G), Ribbon Pack 1452 Disposable Syringes 2 Ml, (24G), Ribbon Pack 1453 Disposable Syringes 5 Ml, (23G), Ribbon Pack, Reuse Preventable 1454 Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 6.5 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) 1455 Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 7 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) 1456 Disposable Sterile Powder Free Gloves For Eye Surgeries Surgical Gloves 7.5 No Latex Powder Free, Polyurethane Coated, Brown Colored, Gamma Irradiated Surgical Gloves. Absence Of Common Allergens, Puncture Resistant, Antislip, Smooth Finish, Anatomical Fit, Beaded Cuff, Endotoxin Concentration As Per Fda Guidelines And Ce Certified. (Single Unit) 1457 Disposable Shoe Cover 1458 Disposable Insulin Syringe (31G), Ribbon Pack 1459 Disposable Mask 1460 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size 2-0, ½ Circle R.B. Needle 1461 Suture Absorbable Surgical Suture Usp (Catgut-Chromic) 76 Cm X 30 Mm, Size1-0, ½ Circle R.B. Needle 1462 Suture Absorbable Surgical Suture Usp (Synthetic) Polyglactin 90 Cm X 30 Mm, Size -2-0, ½ Circle Round Bodied Needle 1463 Suture Catgut 3-0No. R.B. Needle 1464 Suture Non-Absorbable Surgical Suture Usp (Braided Silk Black) 76 Cm X 45 Mm, Size -2-0, 3/8 Circle Reverse Cutting Needle 1465 Suture Silk 2-0No. R.B. Needle 1466 Polyglactin (Plain) Vicryl Usp-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1467 Polyglactin (Plain) Vicryl Usp-1, 90 Cm X 40 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1468 Polyglactin (Plain) Vicryl Usp-3-0, 70 Cm X 20 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1469 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 26 Mm 1/2 Circle, Type Of Needle- Oval Round Body (12 Foils In Each Box) 1470 Polyglecapron Antibacterial Suture: Usp 2-0, 70 Cm X 31 Mm 1/2 Circle, Type Of Needle- Round Body Medium Half Circle (12 Foils In Each Box) 1471 Polymide Suture Usp 0, 1.5 M X 40 Mm Half Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1472 Polymide Suture Usp 3-0, 70 Cm X 26 Mm, 3/8Circle Type Of Needle- Reverse Cutting (12 Foils In Each Box) 1473 Polypropylene Suture Usp -1, 70 Cm X 40 Mm, 1/2 Circle Type Of Needle- Heavy Round Bodied (12 Foils In Each Box) 1474 Polypropylene Suture Usp -2-0, 90 Cm X 30 Mm, 1/2 Circle Type Of Needle- Round Bodied (12 Foils In Each Box) 1475 Stadiometer 1476 Wooden Stick (Oral Examination) 1477 Bp Appratus 1478 Weighing Machine (Digital) 1479 Acetic Acid 100% 1480 Swab Sticks For Vig Examanation 1481 Torch 1482 Mouth Mirror 1483 Disttled Water 1484 Wooden Tongue Depressor 1485 Mantoux Test 1486 Albumin (5X50Ml) 1487 Alkline Phosphtase 4X24 + 4X6Ml) 1488 Bilirubin Kit 4X60Ml) 1489 Cholestrol Kit 5X30Ml) 1490 Creatinine Kit (4X60M)L 1491 Ggt (5X6.5Ml) 1492 Glucose Kit (5X60Ml) 1493 Hdl Kit (4X30Ml + 4X10Ml) 1494 High Control For Semi Auto (1X5Ml) 1495 Normal Control For Semi Auto (1X5Ml) 1496 Sgot Kit (4X24Ml + 4X6Ml) 1497 Sgpt Kit (4X24Ml + 4X6Ml) 1498 Total Protein (5X50Ml) 1499 Triglycerides Kit (4X24Ml + 4X6Ml) 1500 Urea Kit (4X24Ml + 4X6Ml) 1501 Uric Acid Kit (4X24Ml + 4X6Ml) 1502 Wash Kit (4X50Ml) 1503 Reagent For Fully Automatic Bio-Chemistry Analyser Bs400 Which Must Be In Liquid State Stable Form 1504 Alkaline Phosphate 8X50 / 8X12.5Ml 1505 Amylase 4 X 20 Ml/ 2 X 10 Ml 1506 Bilirubin Total 8X50 / 8X12.5Ml 1507 Bilirubin Direct 8X50 / 8X12.5Ml 1508 Cholestrol 8X50Ml 1509 Crp Fs 1X20 / 1X10Ml 1510 Ck - Nack 4 X 20 Ml/ 2 X 10 Ml 1511 Cpk - Mb 4 X 20 Ml/ 2 X 10 Ml 1512 Creatinine 8X50 / 8X12.5Ml 1513 D-Dimer 2X12Ml + 1X8Ml 1514 Ferritin 2X20 / 1X10Ml 1515 Glucose 8X50/8X12.5Ml 1516 Hdl 4X20 / 2X10Ml 1517 Hba1C 2X15 / 1X10 / 1X5Ml 1518 Hba1C 3X20/ 2X10 / 1X10Ml 1519 Hemolyzing Solution 500 Ml 1520 Iron Tibc 4X20 / 2X10 1521 Ldh 8X50Ml + 8X12.5Ml 1522 Ldl 4X20 / 2X10Ml 1523 Lipase 4X20 / 2X10Ml 1524 Ra Factor 2X20 / 1X8Ml 1525 Acetec Acid 5% 1526 Tablet Chlorine 1527 Capillary Tubes 1528 Card For Haemo Spot 1529 Centrifuge Tube Stand 15 Ml(10*2) 1530 Centrifuge Tube Stand 50 Ml(15*2) 1531 Conical Flask 500 Ml 1532 Coplin Jars 1533 Covid Elisa Antigen Kit (Icmr Approved) 1534 Crp 50 Test Kit (Qualitative) 1535 Cryo Box With Lid 1536 Cryo Vials 2 Ml 1537 Cup For Bs400 Chemistry Analyzer 1538 Diamond Marking Pencils 1539 Disposable 3 Ply Mask 1540 Disposable Alcohol Swab 1541 Disposable Cap 1542 Disposable Esr Pipette 1543 Disposable Esr Tube (Westergen Method) 1544 Disposable Gown 1545 Disposable Shoe Cover 1546 Distilled Double Dionized Water 5 Ltr 1547 Distilled Triple Dionized Water 5 Ltr 1548 Distilled Dionized Water 5 Ltr 1549 Drums Tube 1550 Ecg Jelly/Usg Jelly 1551 Edta Vial (Non Vacuum) 1552 Edta Vial (Vacuum) 1553 Eppen Drop Vial ( Mct ) 1554 Esr Black Vial (Non Vacuum) 1555 Esr Black Vial (Vacuum) 1556 Esr Stand 1557 Face Shield 1558 Falcon Tube Rack 1559 Falcon Tube (All Size) 1560 Filter Paper 1561 Filter Tip 100 Micro Litre (1*960) 1562 Filter Tip 20 Micro Litre (1*960) 1563 Filter Tip 10 Micro Litre (1*960) 1564 Filter Tip 200 Micro Litre (1*960) 1565 Filter Tip 5 Micro Litre (1*960) 1566 Floride Vial (Non Vacuum) 1567 Floride Vial (Vacuum) 1568 Gel Iec Pack 1569 Glass Bottel Round 1570 Glass Cover Slip 22 Mm 1571 Glass Pipette 10Ml 1572 Glass Pipette 2Ml 1573 Glass Pipette 5Ml 1574 Glass Slide 1575 Glucostix 50 Sticks 1576 Hand Sanitizer 5 Ltr (Ip Base) 1577 Hb Pipette 1578 Hb Tube 1579 Hbsag Card 1580 Hcv Rapid Card 1581 Hiv Rapid Card 1582 Insulated Sample Transportation Box 1583 Lancet (Auto Destroyable/Safety Lancet) 1584 Lancet (Twisted Round) 1585 Leucoreduction Filter 1586 Malaria Antigen Card 1587 Mct Vials 1.5Ml 1588 Mct Vials 2.0Ml 1589 Measuring Cylender 20Ml 1590 Measuring Cylender 100Ml 1591 Measuring Cylender 500Ml 1592 Measuring Cylender 1000Ml 1593 Microscope Cover Glass 22 X 40 Mm 1594 Multistix 1595 N/10 Hcl 500Ml 1596 Parafilm Tape 1597 Pastuer Pipette 1598 Ph Paper 5.0 To 7.5 1599 Plain Vial (Non Vacuum) 1600 Plain Vial (Vacuum) 1601 Ppe Kit (Citra & Drda Approved) 1602 Pregnancy Cards 1603 Ra Factor 50 Test Kits 1604 Reversible Rack Mct 1605 Rubber Teat For Pipette 1606 Slide Storage Rack 1607 Slide Storage Tray Pvc 1608 Sodium Citrate Vials Non Vaccum 1609 Sodium Citrate Vials Vaccum 1610 Sodium Hypochloride 5 % 5 Ltr 1611 Sst Vials Non Vaccum 1612 Sst Vials Vaccum 1613 Steel Rack For Test Tube 48 Hole 1614 Sterile Swab Stick 1615 Sterlum 500Ml 1616 Stickers For Slide (Per Piece) 1617 Test Tube Glass 12*100 1618 Test Tube Glass 12*75 1619 Test Tube Glass 15*150 1620 Test Tube Glass 25*150 1621 Test Tube Stand 1X 10 Slots 1622 Test Tube 1X 30 Slots 1623 Thermocol Box 1624 Thermal Paper Roll 1625 Tissue Paper Roll 20 Meter 1626 Tourniquate 1627 Sample Cup With Label (3 Screw, Sterile)/ Sputum Cup 1628 Uristix 100 Strips 1629 Vaccutainer 1630 Vaccutainer Needle 1631 Vtm Swab Stick (Standard Size) 1632 Washing Brush . For Test Tube (Standard Size) 1633 Widal Kit (Slide Method) 1634 Wipes 1*280 Pc Lab Grade 1635 Yellow Tips 1X1000 Nos 1636 Zip Lock Pouch For 1 Ltr 1637 Anti-D Igg 10 Ml 1638 Anti-D Igm 10 Ml 1639 Copper Sulphate Powder 500Gm 1640 Dpx Mount 1641 Ethanol Absolute 1642 Fouchet Reagent 1643 Giemsa Stain 125 Ml 1644 Glacial Acetic Acid 1645 H & E Stain (Haematoxillin Stain) 1646 J.S.B 1 Stain 1647 J.S.B 2 Stain 1648 Lieshmen Powder 25 Gm 1649 Lugal Iodine 125 Ml 1650 Manual Rna Extraction Kit 50 Test (Icmr Approved) 1651 Mathenol 2.5 Ltrs 1652 Naoh Sodium Hydroxide 1653 Oil Immersion 25Ml 1654 Rapid Pap Stain Kit 1655 Rapid Test Kit Igg, Igm, Ns1 For Dengue 1656 Rtpcr Kits 96 Test For Covid-19 (Icmr Approved) 1657 Siprit 1658 Sodium Chloride 1659 Sodium Dehydrogen Orthophosphate 1660 Sodium Hydrogen Orthophosphate 1661 Sodium Hypochloride 10% 1662 Sulphar Powder 500 Gm 1663 T3 Elisa (96 Test) 1664 T4 Elisa (96 Test) 1665 Tsh Elisa (96 Test) 1666 Xylene 1667 Anti Ab 1668 Anti D ( Igg+ Igm) 1669 Anti Human Sera/ Coombs Sera 1670 Blood Grouping Plate 1671 Bovine Albumin 1672 Single Blood Bag 350 Ml 1673 Triple Blood Bag 450 Ml 1674 Double Blood Bag 350 Ml(Sagm) 1675 Double Blood Bag 350 Ml 1676 H.I.V Elisa 4Th Generation (96 Test) 1677 Hb Strips 1678 Hbsag Elisa 4Th Generation (96 Test) 1679 Hcv Elisa 4Th Generation (96 Test) 1680 Quadraple Blood Bags 450Ml 1681 Single Blood Bag 350Ml 1682 Vdrl Card 1683 Absolute Alcohol 95% (500 Ml) 1684 Acetone (500Ml) 1685 Hiv Tridot Rapid Cards 1686 Biological Indicator 1687 Bunsen Burner 1688 C.L.E.D Agar 500Gm 1689 Carbol Fuchsin Powder (25 Gm) 1690 Carbol Fuchsin (125 Ml) 1691 Carbolic Acid 500Ml 1692 Chemical Indicator 1693 Concave Slide 1694 Conical Flask 500Ml 1695 Crystal Violet (125 Ml) 1696 Cyto Brush With Spatula (100 Piece) 1697 Glucose Broath 1698 Gram Iodine Solution (125 Ml) 1699 Haematoxylene Stain 1700 Hydrogen Peroxide 3% (500Ml) 1701 Indicator Tape For Steam Autoclave Process Verification 1702 KovacS Indole Reagent (100 Ml) 1703 Lactose Monohydrate (500 Gm) 1704 Leucoreduction Filter 1705 Liquid Broath 1706 Mac Conkey Agar 500Gm 1707 Mac Conkey Broth Double Strength 500Gm 1708 Methylene Blue 25 Gram (Powder) 1709 Motility Test Medium 1710 Mr Vp Medium 500Gm 1711 Muller Hinton Agar 500Gm 1712 Ph Strips 1713 Sulphuric Acid 98.9% (500 Ml) 1714 Xld Agar 500 Gm) 1715 Xylose Lysine (100 Gm) 1716 Young Broath Culture 1717 Alp Kit 1718 Aso Kit 1719 Capillary Tubes For Ct(Pkts) 1720 Cover Slip(Pkt.) Large(Pkts.) 1721 Cover Slip Small (Pkts.) 1722 Crp Kit 1723 Diamond Pencil 1724 Edta Vacutainer 1725 Esr Tube 1726 Filter Paper For Bt(Pkts) 1727 Formalin (Ltrs.) 1728 Glass Slide 1729 Glucostrips 1730 GramS Stain 1731 Hemoglobin Strips/Hemoque 1732 Ketac-Molar 1733 LeishmanS Stain 1734 Lens Cleaner 1735 Levolin Respules 1736 LugolS Iodine 1737 Mgg Giemsa Stain 1738 Pap Smear Spectulla & Cyto Brush 1739 Ph Strips(Pkts.) 1740 Plain Vacutainer 1741 Plastic Container For Urine 1742 Pm Kits 1743 Ra Kit 1744 Rapid Pep Stain Kit 1745 S.Albumin Kit 1746 S.Calcium Kit 1747 S.Protein 1748 Semen Diluting Fluid (Bottles) 1749 Sugar Kit 1750 Suture (10.0) F 3719 Nylon 1751 Toluidene Blue(500Ml.) 1752 Torniquet 1753 Tsh Card 1754 Widal Kit 1755 Zn Stain Kit 1756 Micro Tips Large 1757 Orthotoluedine Solution 1758 Uristic 1759 Lq080 10 Ml Cooked M Medium (10 Ml X 25) 1760 Sterile Individual Packed Cotton Swabs 1761 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-10Ul 1762 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-20Ul 1763 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 0-200Ul 1764 Sterile Aerosol Barrier Pipette Tips Racked 1 Box (1X 96) 100-1000Ul 1765 Skirted Pcr Plate (96 Wells) 1766 Sterile Transparent Sealant For Pcr Plate (96 Well) 1767 Pcr Kits For Covid 19 Testing Compatible With Biorad Pcr 1768 Mac Conkey Both Purple Single Strength W/ Bcp Media M 083 1769 Mac Conkey Both Purple Double Strength W/ Bcp Media M/96 1770 Elisa Ns1 Dengue Kit (96 Test) 1771 Auromine - O (Per Gm) Powder 1772 Broom Stick Stirrer(Pkt 100) 1773 Heparin Lithimum Tube 1774 Pernament Marker Pen Black 1775 Methanol 5Ltr 1776 Zip Lock Bag 20X25 Cm 1777 Hydrochloric Acid (Mw36.46 ) 1778 Slide Box (100 Slide Per Box) 1779 Biohazard Symbol (Red) 1780 Phenol Cristal 1781 Cello Tape (5 Cm) 1782 Potossium Permagnent (Kmno4) Cristal 50 Gm 1783 Spirit Lamp 1784 Spirit Alochloic 1785 Squize Bottle (Small) 1786 Squize Bottle (Big) 1787 Ruber Band 1788 Temp. Humidity Meter 1789 Weighinj Scale Degital 1790 Perafilm 1791 Brosile Zar 5 Ltr 1792 Brosile Zar 3 Ltr 1793 Brosile Zar 500 Ml 1794 Mac Conkey Broth Purple Single Strength W/ Bcp (Hi Media M083 1(500Gm.) 1795 Mac Conkey Broth Purple Double Strength W/Bcp (Hi Media M 796 1(500 Gm.) 1796 Ria- Tubes 1797 Plastic Tube With Cap 2 Ml 1798 Plastic Tube For Calcium Test 1799 Bp Apparatus Digital 1800 Bp Apparatus Marcury 1801 Weighinj Scale For Blood Unit 1802 Stethoscope 1803 Dengue Ns1 Rapid Test Card 1804 Dengue Igm+Igg Combo Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 8
46.
Housing Urban and Rular Development #11175999 Technical Bid
Tender For Additional Work In Adj No 2 Court Distt. Baran- 1 S&F Following Sizes Of Isi Marked ( Is:14927 P - Ii ) Virgin Material Upvc Trunking Along With Accessories Like Coupler, Inner, Outer, Elbow, Square Box, Tee, End Cap Etc. On Surface With Screws, Expansion Fasteners As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 2 25 Mm X 12 Mm 3 Supplying And Drawing Fr Pvc Insulated & Unsheathed Flexible Copper Conductor As Per Pwd Specification For Electrical Works With Isi Marked (Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Class 5 Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping Making Connections With Copper Lugs Of Suitable Size, Ferrules,Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Wires. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 4 2 X 2.5 Sq. Mm. + 1X1.5Sqmm 5 2 X 4.0 Sq. Mm. + 1 X 2.5 Sq. Mm. 6 Providing & Fixing Of Modular Type Lockable Feature Socket Duly Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 7 25 Amp. 2 Module Socket 8 Providing & Fixing Of Modular Type 120 W Step Fan Regulator Duly Isi Marked (Is 11037:1984 ) With Cm/L No. Printed Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 9 5 Step Fan Regulator 2 Module 360 Dgree Rotating 10 Providing & Fixing Of Following Modular Accessories As Per Pwd Specification For Electrical Works, Made Out Of Unbreakable And Fire Retardant Vergin Poly Carbonate With Brass Terminals And Captive Screws & Silver Alloy Contact Tip With Ip-20 Rating , Including All As Per Pre Approved By Engineer In Charge,Making Connections, Testing Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 11 Led Skirting /Foot Light 2 Module 12 Modular Mcb 6 A To 32 A Sp 13 Providing & Fixing Of 1200 Mm Sweep Bldc Technology Power Saving Ceiling Fan Which Can Withstand On Votage Fluctuations From 140 Volts To 240 Volts ,Power Factor Not Less Then 0.9 , Service Value (Cmm/W) Minimun 6.85 , Air Delivery Minimun 220 Cmm, Speed Minimum 330 Rpm ( Tolerance As Per Is:374 2019 ) Thd Less Then 10% And Complete With Down Rod Of 15 Mm Dia . Erw (Electrical Resistance Welded ) Of 1.6Mm Nominal Thick Medium Duty Steel Pipe Up To 80 Cm , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 14 Without Remote 15 Providing & Fixing Of Bee Star Rated Copper Wounded Double Ball Bearing Capacitor Start, Aluminium Body & Metallic Blade Ceiling Fan Conforming To All The Performance Requirements Laid Down In Is 374:2019 Including All Amendments, As Applicable ; & Carry Bis Licensing (I.E. Isi Marking) With Down Rod Up To 80 Cm With Secondary Support Safety Cable ( Steel Rope) , Cotter Pin With 3 X 1.5 Sq.Mm Pvc Insulated Flexible Copper Conductor Making Connection Testing Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 16 1200 Mm Sweep Bee 1 Star Rated (Service Value >=4.0 To 17 Rewinding Of Single Phase Motor Of 1400 Rpm Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enamelled Wire E Class Insulation Material And Testing Etc. As Required. Replacement Of Material Or Components Shall Be Use As Per Guidelines Of Oem Of Original Product. All The Scrap Material Should Be Retained By The Contractor. 18 0.25 H.P. To 0.50 H.P. 19 Rewinding Of Single Phase/3Phase Submersible Motor Including All Necessary Material And Of The Same Characteristics As Original With Required Size Of Super Enamelled Wire E Class Insulation Material And Testing Etc. As Required. Replacement Of Material Or Components Shall Be Use As Per Guidelines Of Oem Of Original Product. All The Scrap Material Should Be Retained By The Contractor. 20 0.5 H.P. To 1.0 H.P. 21 Sitc Of Contactor Oem Fabricated Dol/Star-Delta Starter Panel With Switchgear Selection As Per Type-2 Cordinatiom Chart And Made Out From 1.6 Mm Thick Powder Coated Crca Sheet, Enclosure Comprising Of Over Load Protection Relay, Short Circuit & Single Phasing Protection, Illuminated On / Off Push Buttons, Ammeter, Voltmeter, Indicating Lamps Etc. Suitable For Following Rating Motors Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 22 For Single Phase Submersible / Monoblock Pump 23 0.5 Hp To 1.5 Hp (Dol Starter) 24 For Three Phase Submersible / Mono Block Pump 25 Upto 3.0 Hp ( Dol Starter ) 26 P/Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To(Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, Existing Pipe / Open Trench / Cable Tray / On Surface Including Making Connection Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 27 2.5 Sq.Mm 3 Core Flat / Round 28 Providing & Laying P.V.C. / Xlpe Insulated & P.V.C. Sheathed Arrmoured Aluminium Cable Confirming To Is:1554 P-I / Is :7098 P - I Of 1.1 Kv With H4- Grade Electrolytic Aluminium Conductor Confirming To Is 8130 Of Purity >99.6 %, Round / Flat Strip Armouring Of Cables, Inner / Outer Sheath Confirming To Is:5831 In Existing Rcc / Hume / Stoneware / Pvc Pipe/ Open Duct/Cable Trench / Cable Tray(With Cable Tie) Including Testing Etc. As Required Of Following Size. Oem Must Have ItS Own In House Nabl Accrediated Laboratory For Testing Procedure As Per Is:10810.For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 29 6.0 Sq. Mm 30 4 Core 31 50.0 Sq. Mm 32 3.5 Core 33 Add Extra For Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Direct In Ground Including Excavation Of Trench Of Size 75 Cm (Depth) X 35 Cm(Width) , With Procedure As Per Following Points:- (A) Make A River Sand Bed Of Height 125 Mm Along The Trench, (B) Lay The Cable In The Middle Of The Trench, (C) Provide River Sand Bed Of Height 125 Mm On Top Of The Cable, (D) Lay The Protective Common Burnt Clay F.P.S. Bricks Of Class Designation 75 / Sand Stone Slabs Of 50 Mm Thickness And 225 Mm Wide Just Above The Sand Bed Vertically Across The Cable ( Approx. 9 No. Bricks Per Mtr.), (E) Backfill The Excavated Soil Leaving 300 Mm From The Ground Level, (F)Lay The Cable Warning Tape And Again Back-Fill The Remaining Portion Of The Trench Upto The Ground Level And Compacting The Earth 34 P / L Of Double Wall Corrugated Hdpe Pipe Confirming To Is : 16205 P-24, Stiffness Class 750 N, Externally Corrugated And Having Smooth Surface Inside With Hdpe Coupler, Elbow, Tee At Required Depth Below The Ground For Laying Cable Of Following Nominal Outer Dia. Mfr Test Report From Nabl Accrediated Is To Be Submitted.(Excavation Of Earth & Back Filling With Compaction Is To Be Paid Extra)All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 35 50 Mm 36 90 Mm 37 Providing & Fixing Of 240/415 V Ac Mcb With Positive Isolation Of 10 Ka Breaking Capacity (B/ C/D Tripping Characteristic As Per Type Of Load And Site Requirement) 4 Kv Impulse Withstand Voltage, Isi Marked Is 8828(1996) / Conforming To Iec 60898-1 2002, Iec 60947-2, Low Watt Losses, Trip Free Mechanisum , Energy Limiting Of Class 3 As Per Iec, Minimum Phase Termination Capacity Of 35Sq.Mm. , Conductor Line Load Reversibility , Ip 20 Contact Protection And Fitted In Existing Distribution Board/Sheets, Minimum Electrical Operation 20,000 Upto 20 A Rating And 10,000 Upto 63 A, 5000 For 80 A & Above Rating Including Making Connections, Testing Etc. As Required. Oem Shall Have Submit Nabl / Cpri / Erda Accrediated Lab Type Test Reports & All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 38 Single Pole Mcb (With B/C Curve Tripping Characteristics) 39 6 A To 32 A Rating 40 Four Pole Mcb (With B/C Curve Tripping Characteristics) 41 40 A Rating 42 Supply , Installation, Testing And Comissioning Of Inverter Type Air Cooled Hi Wall Split Type Air Conditioners With Latest Star Rating System As Per Bee Amended Upto Date Complete With Indoor Unit(Idu), Out Door Unit (Odu), Surface / Concealed Copper Refrigerant Piping With Insulation (Closed Cell Elastomeric Nitrile Rubber Tubular Pipe Section) Upto 3 Mtr (Idu To Odu), Copper Power Cable Upto 3.5 Mtr (Idu To Odu), R-32/R-410 Green Refrigerant, Wireless Remote Control, Suitable For Working Between 230V +/- 10% With Low & High Voltage Cutoff And 50 Hz , Single Phase Ac Supply Capable Of Performing Cooling, Dehumidification, Air Circulation Of Following Capacity With Scroll / Rotary Compressor. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 43 1.5 Tr Iseer Not Less Then 3.8 44 Supplying And Drawing Flexible / Stranded Bare Copper Conductor, Pvc / Xlpe Insulated, Overall Aluminium Mylar Tape Shielded Atc Drain Wire And Outer Pvc Sheathed Industrial Instrumentation (Shielded)Cables Voltage Grade 300/500 V As Per Bs /En 50288-7 In Existing Surface Or Recessed Pvc/ Ms Conduit/Casing Capping / Cable Tray / Open Duct Making Connections, Testing Etc. As Required. Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Cables. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 45 Un Armoured 46 4 Core X 2.5 Sq.Mm 47 Supply, Installation, Testing And Comissioning Of Interconnecting Copper Refrigerant Piping Of Dhe Grade C12200- Astm B68, B75, Chemical Composition Of Copper %- 99.0 Min And Phosphorus %- 0.015 To 0.040 . For Annealed Copper Tube :- Tensile Strength = 210 Mpa Wih Elongation % = 40 Min . Ink Mark Brand Printing On Hard Tubes Should Be Present. Duly Insulated With Tubular Elastomeric Nitrile Rubber Fm/Ul Approved With High Water Vapor Diffusion Resistance And Low Thermal Conductivity Should Be Certified Class O In Fire Propagation As Per Bs 476 Part 6 Including Chase Cutting Andfilling With Mortar, Slotted Channel Supports Mounted On 10 Mm Threaded Rod At Suitable Spacing The Exposed Piping Shall Be Wrapped With Glass Woven Cloth And Lag Coating For Vapour Barrier And Weather Protection. Joints Shall Be Covered With Nitrile Rubber Tape Of 3 Mm Thick Complete As Required Of Following Sizes. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 48 12.7 Mm O.D., Wall Thinkness ≥ 0.8Mm (Insulation – 13 Mm Thick) 49 6.4 Mm O.D., Wall Thinkness ≥ 0.8Mm (Insulation – 13 Mm Thick) 50 Providing & Fixing Of Is : 4985 - 2000 Class -4 (10 Kgf / Sqcm) Upvc Drain Water Piping With Fittings (Is:7834 & 10Kgf/Sqcm) Like Elbow, Socket, Tee, Solvent Cement Jointing, Support With Ms Hanger On Ceiling Or Recessed In Wall With Chasing & Plastering With 6 Mm Thick Closed Cell Elastomeric Nitrile Rubber Insulation Including Leakage Testing Etc. As Required Of Following Nominal Sizes. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 51 20 Mm 52 Making Hole In Stone Masonary/ Rcc Wall/ Rcc Slab With Core Cutter For Accomodating Refrigerant Pipe/ Drain Pipe/ Ms Pipe/ Cables Etc Of Following Dia 53 100 Mm Dia Per Running Inch Length 54 Supply & Fixing Ms Powder Coated Stand Suitable For 1.0/1.5/ 2.0 Tr Outdoor Type Of Split Ac. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 55 Supply, Fixing And Testing Of Following Capacity Iso Certified Company Made Wall Mounted Stabilizer Having Output Voltage Variation From 200 V To 250 V(+/-5%) With Input Voltage Variation From 170 V To 260 V, Time Delay Facility From 2 To 4 Minute And High Cutoff At 270 V With Providing Of 16 Amp /20 Amp Industrial Plug Top Making Connection Etc Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 56 3 Kva 57 Providing And Fixing Of Ip 65 Protected Polycarbonate / Polysterene Fuse Box Moulded With Inside Knock Outs Of Following Size With Hinged Cover, Transparent Window, Pu Gasket, Locking Arrangement, Duly Holded With 2 Nos. Pole Clamps Of 20 Mm X 3 Mm Flat With Nut And Bolts, The Box Shall Be Provided With Din Rail, 4 / 8 Way 10.0 / 16.0 Sq.Mm Heavy Duty Connector, Earth Terminal, Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 58 125 Mm X 200 Mm X 122 Mm 59 Supply, Drawing And Testing Of 4 Pair, 23 Awg Solid Bare Copper Wire Insulated With Pvc, Utp (Unshielded Twisted Pair), Category 6, Class E, 100 Ohm Impedance, Indoor Cable As Per Latest Ammendments Of Ansi/Tia/Eia-568 , The Copper Conductors Should Be Balanced Twisted In Pairs, Seperated By A Cross-Member Fluted Pair Divider & Protected By Pvc Jacket. Certified Performance In A 4-Connector Configuration Upto 100 Mtrs Channel Requirements & Transmission Frequencies Up To 250 Mhz. In Existing Ms/Pvc Conduits/Casing Capping Including Making Connections To Information Outlets And Patch Panels With Jack & Ferruling At Both Ends For Identification With Necessary Tools For Punching, Stripping, Crimping And Testing Etc As Required Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 60 Supply And Installation Of Unsheilded/360 Degree Sheilded Information Outlets Made Of High Impact Plastic Body With Abs, Fr Grade Halogen Free Material With Provision For Protection Against Dust In Jack, Suitable For Cat 6/6A Application Complying To Latest Ammendments, According. To Cat. 6/6A Channel, It Should Support Channel As Well As Components Requirements Of Cat.6/6A Standards At Frequencies Of Up To 250 To 500 Mhz. Cat 6/6A Unshielded/Shielded Jack Should Be Suitable To Terminate 4 Pair, 23/24 Awg Solid/Stranded Wire Diameters, Using 100 Ohm Unshielded/Shielded Balance Twisted Pair Cable, The Jack Should Have Tooless/Impact Termination On Reliable Copper Tin Plated Insulation Displacement Contact, With Easy Lock Mechanism, It Supports Iec 60603-7-4 And Complied With Ansi/Tia/Eia 568 C.2 Standard. Jack Should Be Rj11,Rj12 & Rj45 Compatible. Should Support Ethernet 1.2 Gb/S Atm,Digital Video And Broadband/Baseband Analog Video, Voice Over Internet Protocal (Voip) Specifications In Existing Modular/Ms Boxes Along With Necessory Connections As Required.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 61 Cat 6, Un-Sheilded Information Outlet 62 Supply & Fixing Of Square Faceplate For Flush / Surface Mount Information Outlets Single/Dual Or Quad Aperture , Material Should Be Pc+Abs Body, Suitable For Rj45 Unshielded/Shielded Connection Modules. Should Match With I. O. Oem. Dimensions Should Be 86Mm X 86Mm As Required Complete In All Respect. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 63 Single Aperture 64 Supply , Installation And Testing Of 4 Pair, 100 Ohm Impedance, Cat 6/6A /Class E/Ea Patch Cords Should Be Constructed Of Minimum 23/24 Awg, Stranded Bare Copper Cable With Frpvc/Lszh Jacket, With An Enhanced Performance By Factory Moulded Rj45 Connectors With Strain Relief Boots As Per Ansi/Tia/Eia 568-C.2 Suitable For Cat 6/6A Application Complying To Latest Ammendments Category 6/6A Standards, According. To Tia568C.2, Iso/Iec 11801, En 50173, Iec 60603-7-51, En 60603-7, Ieee 802.3An Minimum Requirement For 1G Base-T To 10G Base-T Performance. Patch Cords Shall Be Straight Thru Cable Compatible With Both T568-A And T568-B Wiring Schemes, Should Support Ieee 802.3Af / Ieee 802.3At For Poe Applications, Minimum 750 To 1000 Mating Cycles In Plug Contacts For Long Durability, Should Support Ethernet 10Gbase-T, 1.2 Gb/S Atm, Token Ring 4/16, Digital Video And Broadband/Baseband Analog Video, Voice Over Internet Protocal (Voip).All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 65 Cat 6, U/Utp (Unscreened/Un-Sheilded Twisted Pair) Patch Cord 66 0.50 Mtr 67 Plate Earthing As Per Is:3043 With Hot Dipped G.I. Earth Plate Of Size 600Mm X 600Mm X 6.0Mm By Embodying 3 To 4 Mtr. Below The Ground Level With 20 Mm Dia. G.I. B Class Watering Pipe ,Including All Accessories Like Nut, Bolts, Reducer, Nipple, Wire Meshed Funnel, And Heavy Duty Weather Proof Poly-Propylene Earth Pit Chamber With Lockable Jam Free Lid Suitable For Safe Working Load 5000 Kg Or More Of Size Top Dia. 225 To 260 Mm, Bottom Dia 300 To 350 Mm. And Height 250 To 300 Mm. And Embodying The Pipe Complete With Alternate Layers Salt And Coke/ Charcoal, Testing Of Earth Resistance For Value Of 5 Ohms Or Less As Required & Must Record By Engineer In Charge During Site Visit And Ensure To Enter In Measurment Book.All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 68 Supply & Laying Following Size Earth Wire In Horizontal Or Vertical Run In Ground/Surface/Recess Including Riveting, Soldering, Saddles, Making Connection With Gi/Cu Purity Purity >95% Thimble Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 69 8 Swg G.I. ( Hot Dipped ) Wire 70 Sitc Of Ip-42 And General Construction Confirming To Is:8623 : 1993, Wall/ Free Standing Floor Mounted Dust And Vermin Proof Compartmentalised Cubical Panel As Specifications And Other Parameters Required As Per Point (A) ,(B), (C),(D), (E), (F), (G), (H) As Below:- 71 (A)Thickness Of Crca Sheet Shall Be 2.0 Mm, Cable Alley Compartments Having Concealed Hinged Type Doors With Key Type Lock With / Without Detachable Extension Type Structure. Removable 3 Mm. Thick Sheet Steel Gland Plates With Appropriate Size Of Knockouts For Cables Shall Be Provided 72 (B)Complete Panel Shall Undergo A Process Of Degreasing, Water Rinsing, Activation, Derusting, Pickling In Acid Bath, Phosphatising & Shall Be Subjected To Nine Tank Process And Then Powder Coated With Approved Shade Of Minimum 70 Microns On Both Side Of Panel. The Panel Having Pe Foam/ Neoprene Rubber Gasket Of Not Less Than 3Mm Thickness ,Required Hardware , Concealed Hinged Door With Key Type Locking Arrangement For Equipment/Switchgear Earthed With 2.5 Sq.Mm Braided Copper Wire. 73 [C) Interconnection Between Bus Bar And Switchgears /Cable Shall Be Rigidly Supported And Made Out By Flexible Copper Wires (Up To 63 Amp ) And By Solid Bus Bar (>63 Amp ) . Control Wiring Will Be Carried Out With 1.5 Sq.Mm, Earth Wire With 2.5 Sq.Mm And Ct With 2.5 Sq.Mm Flexible Copper Wire Only. All Joints / Interconnections Of Copper Bus Bar Shall Be Dully Tinned . Clearance Between Main Bus Bar And Risers / Metal Parts Shall Be At Least 10 Mm Additional To Width Of Bus Bar Bus Bar Is Insulated By Heat Shrinkable Sleeves . Earth And Neutral Bus Bar Shall Be Half Of The Size Of Phase Bus Bar. ( Cost Of Bus Bar / Flexible Wire For Interconnection Between Main Busbar And Switchgear Is To Be Paid Extra ) 74 (D)Wiring Between Components Within Switchgear And Incoming / Outgoing Cable Shall Be Done Through The Terminal Block Only. Direct Connection Shall Not Be Permitted. Each Terminal Block Shall Be One Piece Moulded, Barrier Type, 650 Volt Grade, Complete With Washers, Heads, Studs With Two Nuts And Identification Strips And Shall Have Adequate Continuous Current Rating. For Tap-Offs, Adjacent Terminals With Shorting Strips Shall Be Used. 10% Spare Terminal Blocks Shall Be Provided. Wire Identification On Marking Strip Shall Correspond To The Designation Of The Wiring Diagrams. All Wire Terminals On The Equipment Shall Also Be Marked With Designation Corresponding To Those Of The Wiring Diagram. 75 (E)All Wiring Shall Be Enclosed In Plastic Channels And Neatly Bunched And Closed In Metering Chamber, Wiring Between Terminals Of Various Devices Shall Be ‘Point To Point’ (No Wire Splitting Or Tee Connections) With Wires Neatly Trucked Along The Back Of The Panels, Adequately Supported To Prevent Sagging. 76 (F)Floor Mounted Panel Shall Be Mounted On Base Frame Of Ismc Channel Size 100 X 50 X 5 Mm ( To Be Paid Extra ) 77 (G) Tests: The Insulation Resistance (With 1000 V Megger) And High Voltage Power Frequency Test (By Applying A Voltage Of 2.5Kv For One Minute) Shall Be Measured Between Phases, Between Phase And Neutral And Between Phase And Earth. Both Before And After High Voltage Power Frequency Test. The Insulation Resistance Shall Not Be Less Than Three Megaohm. Ct Secondary Current Injection Test Shall Also Be Carried Out. 78 (H) Only Outer Surface Area On All Sides Shall Be Measured & Panel To Be Fabricated Only From Cpri Approved Fabricator Only (Cpri Test Certificates To Be Submitted)All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 79 Providing & Fixing Of 110/220 V, Unibody Led Indicating Lamp Iec 60947 With Integral Circuit, Ip 65 Above Panel & Ip 20 Terminal Block, Approx. Body Dia For Panel Not Less Then 20 Mm, Length Min. 50Mm, Front Led Cover Dia Min. 29 Mm, Contact Material Phospher Bronze For Led, Pcb Contacts Shall Be Of Brass (Tin Plated), Impulse Dielectric Tested For 2.5 Kv, Rated Insulation Resistance Shall Be 100 M Ohm At 500Vdc Including Connection Etc. As Required. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 80 Red/Yellow/Green Colour 81 Blue / White Colour 82 Providing & Fixing Of Ik08, Ip 66 Protected Led Street Light Luminaire On Existing Bracket/Pole. Fixture Made Of Powder Coated Single Piece Pressure Die Cast Aluminum Material With Heat Dissipation Fins On Housing With Uv Stabilized Pc (Uv Stablization Report Submitted For Uv Cover ) /Toughened Glass Cover And Secondary Lens On Each Led & Should Be Smd Type Of 3 To 5 Watt Each . The System Efficacy >=125 Lm/ Wt And Potted Driver & Has A Unique Bis R Number With Input Voltage Ac 120 To 270 V Ac With High Voltage Cutoff @>=300 V Ac And Auto Resetting Safety , Power Factor >0.95 Driver Efficiency >85% ,Thd(I) 70 And Cct 5700K +355K. Surge Protection Shall Be Min ≥ 4 Kv Internal And Min 10 Kv External Inside Driver Compartment. Driver Should Be Phase To Phase Protection Of 440 V For 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing On Die Cast Housing To Allow Traceability/Authenticity. Fixture Shall Be As Per Is 10322 Complianced.Oem Must Have Its Own In House Nabl Lab Setup For All Testing Facilities For Led Fixtures. (Lm79/Lm80) Certificate/ Report With Liable Warranty Of Product/Accessories From Oem Shall Be Submitted. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/ Work , Refer Annexure \A\ Attached With This Bsr . 83 Led Street Light Fixture With Minimum Lumen Output 8700 Lm 84 P/Laying Isi Marked P.V.C. Insulated Submersible Cable Confirming To(Is:694) And As Per Is 8130 : 2013 Of 1.1 Kv Grade . Wire Should Be Made From 99.90 % Purity Copper, Stranding In Acc. To Is:8130/Iec 60228 For Lower Watt Loss , Oxygen Free For Less Chances Of Oxidization, Insulation Pvc Type A/C/D , Flame Retardant As Per Is 10810-53, Better Amperage Rating As Per Is:3961 Part 5, Existing Pipe / Open Trench / Cable Tray / On Surface Including Making Connection Etc. As Required. For Additional Technical Parameters Of Product / Work Refer Annexure A Attached With This Bsr 85 1.5 Sq.Mm 3 Core Flat / Round 86 Supply, Installation, Testing And Commissioning Of Bis Compliance Professional Series Diagonal Screen Size 43\ Led With Resolution 3,840 X 2,160 (4K Uhd) Along With Static (Panel) Contrast Ratio (1300:1) Or Better With Viewing Angle Of 178/178 Degree With Response Time Of 8Ms Along With Hdmi In 2.0 - 2 Nos., Usb 2.0 - 2 Nos., Rs 232- 1 Nos., Rj 45- 1 Nos. With Built In Speaker(10W + 10W), With High Speed Processor And Android Or Other Reputed Operating System Along With 4 Gb Ram Along With All Audio And Video Decoder, Stand-By / Sleep / Off Mode Power 0.5 Watt. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/Work, Refer Annexure \A\ Attached With This Bsr. 87 Supply, Installation, Testing & Commissioning Of 1 Kva 1 Phase Input, With Igbt Based Rectifier True Online Double Conversion Robust Design Wide Input Voltage Range: 160-300Vac @ 100% Load (Linearly Derating To 50% Load @ 100Vac Input). Generator Compatible With Wide Input Voltage Window Double Conversion Efficiency >91% & Eco Mode Efficiency Up To 98% 100% Load @ 0~40C Operating Temp. Active Input Power Factor Correction 0.99 O/P Power Factor 0.9 Inbuilt Ovcd (Over Voltage Cut-Off Device) Fully Conform Coated Pcba Adaptable To Harsh Environment Offer Terminal Blocker On 2K/3K Rating To Connect To Big Capacity Equipment Digital Charger Technology Provide 02-10 A Charging Current Easy Understanding Lcd For Convenient Installation Setup With Minimum 60 Minute Battery Back Up (26Ah X 3 Nos Of Smf Batteries Branded And Recommended By Ups Oem, Battery Stand And Interlink Fr Pvc Copper Cable Of Appropriate Size And Lugs), With Required Cabling For Incoming & Outgoing Connection. Ups Should Be Nabl Certified With Ce, Rohs & Bis Compliance. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/Work, Refer Annexure \A\ Attached With This Bsr. 88 Supply, Installation, Testing & Commissioning Of 2 Kva 1 Phase Input, With Igbt Based Rectifier True Online Double Conversion Robust Design Wide Input Voltage Range: 160-300Vac @ 100% Load (Linearly Derating To 50% Load @ 100Vac Input). Generator Compatible With Wide Input Voltage Window Double Conversion Efficiency >91% & Eco Mode Efficiency Up To 98% 100% Load @ 0~40C Operating Temp. Active Input Power Factor Correction 0.99 O/P Power Factor 0.9 Inbuilt Ovcd (Over Voltage Cut-Off Device) Fully Conform Coated Pcba Adaptable To Harsh Environment Offer Terminal Blocker On 2K/3K Rating To Connect To Big Capacity Equipment Digital Charger Technology Provide 02-10 A Charging Current Easy Understanding Lcd For Convenient Installation Setup With Minimum 60 Minute Battery Back Up (26Ah X 6 Nos Of Smf Batteries Branded And Recommended By Ups Oem, Battery Stand And Interlink Fr Pvc Copper Cable Of Appropriate Size And Lugs), With Required Cabling For Incoming & Outgoing Connection. Ups Should Be Nabl Certified With Ce, Rohs & Bis Compliance. All As Per Pre Approved By Engineer In Charge. For Additional Technical Parameters Of Products/Work, Refer Annexure \A\ Attached With This Bsr. Please Enable Macros To View Boq Information
Contract Date: Ref. Documents Contract Value : Ref. Document
Government Departments No of Bidders 2
47.
Defence #11162655 Technical Bid
Tender for Material & Labour For In Replacement Of Light/Fan Point Wiring With 1.5 Sq Mm (Nominal Area), Pvc Insulated Unsheathed (Frlsh), 1100 Volts Grade, Multi-Stranded Copper Conductor, In And Including Pvc Casing Capping Of Adequate Size With All Fittings And Accessories Including Pvc Boxes For Housing The Switches ( Make Of Box Prestoplast,Prestoteak), Including Pvc Insulated And Unsheathed (Frlsh)Single Core Multi-Stranded Copper Conductor Cable Of Size 1.5 Sq Mm Green In Colour As Earth Continuity Conductor Connected To Common Earth Dolly Upto Ceiling Rose/Light Point Complete All As Specified And Directed. , All As Per Item No 1 Here In One Bell/Buzzer Point Controlled By One Bell Push Complete All As Specified And As Directed . , All As Per Item No. 1 Here In Before One 3 Pin Socket Outlet, 6 Amps On The Same Board With Other Switches, With Cables 1.5Sq. Mm Size Complete All As Specified And Directed. , All As Per Item No. 1 Here In Before But For One 3 Pin Socket Outlet 6 Amps Three Pin Controlled By One Switch On Independent Board Complete All As Specified Directed. , All As Per Item No. 1 Here In Before But For One 5 Pin Socket Outlet 16 annual periodical maintenance And 6 annual periodical maintenance Multipurpose Independent Using 2.5 Sqmm Copper Conductor Cable (Multi-Strand) Pvc Insulated And Unsheathed Cable And 2.5 Sqmm Copper (Multistrand) Pvc Insulated And Unsheathed Earth Wire With Pvc Boxes Complete All As Specified. , M&L For Point Wiring For One Socket Outlet 16 annual periodical maintenance On Independent Board With 4 Sq Mm (Nominal Area), Pvc Insulated Unsheathed (Frlsh), 1100 Volts Grade, Multi-Stranded Copper Conductor, In And Including Pvc Casing Capping Of Adequate Size With All Fittings And Accessories Including Pvc Boxes For Housing The Switches ( Make Of Box Prestoplast,Prestoteak), Including Pvc Insulated And Unsheathed (Frlsh)Single Core Multi-Stranded Copper Conductor Cable Of Size 4 Sq Mm Green In Colour As Earth Continuity Conductor Connected To Common Earth Dolly Complete All As Specified And Directed. , S&F Socket Outlet 2 In 1, 5 Pin, 5 annual periodical maintenance Flush Type , S&F Socket Outlet 2 In 1, 5 Pin, 5 And 15 annual periodical maintenance Flush Type , Supply & Fixing Switch Piano Flush Type (Isi Marked), Single Pole, One Way 15 Amp, 240 Volts Complete All As Specified & Directed. , Supply And Fixing In Replacement Of Ceiling Rose, Surface Bakelite, 65Mm X 50Mm , Two To Three Terminals Complete All As Specified & Directed. , Supply & Fixing Switch Piano Flush Type (Isi Marked), Single Pole, One Way 5 Amp, 240 Volts Complete All As Specified & Directed. , S&F Bell/Buzzer Push 5/6 Amp,Flush Type Complete All As Specified & As Directed. , S&F Call Bell Ding Dong Electric Ac, 240 Volt, 50 Hz, Surface Type Complete All As Specified & As Directed. , Supply And Fixing Lamp Holder, Insulated Body With Pack Plate Suitable Batten Fitting On Wall Duly Grouted/Fixed In Solid Block Wall Or On Wooden Board Complete All As Specified And Directed. , Supply & Fixing Modular Switch 1 Way 6A,1 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Switch 1 Way 16A,1 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Socket, 6A - 5 Pin Combined 2 Module, 240 Volts Complete All As Specified & Directed. , Supply & Fixing Modular Socket 6A/16A - 5 Pin Combined 2 Module, 240 Volts Complete All As Specified & Directed. , S&F Modular White Cover Plate With Frame 03 Module , S&F Modular White Cover Plate With Frame 04 Module , S&F Modular White Cover Plate With Frame 06 Module , S&F Modular Surface Mounted Plastic Flush Box 3 Module , S&F Modular Surface Mounted Plastic Flush Box 4 Module , S&F Modular Surface Mounted Plastic Flush Box 6 Module , Supply And Fixing Led Light Fitting Mirror Type With High Out Put Diffuser 2 Feet, 10 Watt 220 V Ac Decorative Type With Driver Holder And Led Lamp Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed. , Supply And Fixing Led Light Fitting With High Out Put Diffuser 4 Feet, 20 Watt 220 V Ac Decorative Type With Driver Holder Including Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Led Tube Rod With High Out Put Diffuser 4 Feet,20 Watt 220 V Ac Decorative One Side Connection Type With Driver Holder Complete All Asspecified & Directed. , Supply And Fixing Led Batten, 220V, Ac Decorative Box Type With Holder Suitable For Fixing Led Tube Light 20/22 Watt Connecting Up With Three Core Flexible Copper Conductor Cable Of Suitable Size From Ceiling Rose Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Warm White) 220 V Ac With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Sitecomplete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Of Led Luminaire 600 Mm X 600 Mm, 35/36 Watt, (Cool Day Light) 220 V Ac With High Efficiency Pmma Diffuser Soft Glare Free Light Of Colour White/Warm White As Per Requirement At Sitecomplete With Driver, Holders & Led Lamp Suitable For Roof Ceiling Including Connecting Up With Driver Three Core Flexible Copper Conductor Cases Of Suitable Size Complete All As Specified And Directed. , S&F In Replacement Downlighter Round 18 W (White/Warm White) Type & Driver Incl Integrated Electronic Driver Including Taking Down Old Unsv One Complete All As Specified And Directed , S&F In Replacement Downlighter Surface Mounted Square 1X1 Type 18 W (White/Warm White) Type & Driver Incl Integrated Electronic Driver Including Taking Down Old Unsv One Complete All As Specified And Directed , S&F In Replacement Of New Generation Energy Saving And Environmental Friendly Long Life Led Building Security Light Made Up Of Innovative Die Cast Aluminium Housing High Power Led As Lighting Source With Ip - 66 Power Consumption 35 Watt Complete Input Voltage Of 150-240 Volt (Nominal Rated Voltage 240 Volt) Complete Including Twisted 3 Core Copper Cable Of Size 1.5 Sqmm Dia For Connecting Phase, Neutral And Earth From Ceiling Rose To Light Length As Required At Site,Gi Bracket 25 Mm Dia Pipe And 02 Numbersclmaps, All Fixing Arrangements Such As Fastners, Bilts, Nuts Washers Etc All As Specified And Directed. , S&F In Replacement Led Bulkhead Fitting 10 Watt (Endura Ruby) With All Accessories And Including Connenting Up With Twin Core Twisted With Flexible Copper Conductor Cable With Suitable Size Of 230 Volts , 50 Hz Complete All As Spicified And Directed. , S&F Led Rechargeable Lamp 12 Watt, Cdl, B-22 Cap, (Pin Type), 230W, providing fixing Not Less Tha 0.85 (Min) Complete All As Specified And Directed. , S&F Wire For Circuit/Sub Main Wiring With 1100 Volts Grade Double Core Pvc Insulated And Unsheathed Cable With Multistranded Copper Conductor 4 Sqmm, On Surface Or Recessed Or Drawn In Pvc Casing Capping/Pvc Pipe Along With 4 Sqmm Single Core Copper Conductor Multi Stranded Cable As Earth Continuity Conductor Complete All As Specified And As Directed.(Note: One Rm Pvc Casing Capping/Pvc Conduit ,One Run Of 4 Sqmm Earth Wire And 2 Run Of 4 Sqmm Cable Shall Be Measured As One Run.) , S&F Wire For Circuit/Sub Main Wiring With 1100 Volts Grade Double Core Pvc Insulated And Unsheathed Cable With Multistranded Copper Conductor 6 Sqmm, On Surface Or Recessed Or Drawn In Pvc Casing Capping/Pvc Pipe Along With 6 Sqmm Single Core Copper Conductor Multi Stranded Cable As Earth Continuity Conductor Complete All As Specified And As Directed.(Note: One Rm Pvc Casing Capping/Pvc Conduit ,One Run Of 6 Sqmm Earth Wire And 2 Run Of 6 Sqmm Cable Shall Be Measured As One Run.) , Material & Labour For Earthing Complete With Galvanised Steel Earth Plate Electrode 600X600x6 Mm Thick Buried Directly In Ground (Earth Pit Not Less Than 2.25M Deep Below The Ground Level) With Top Edge Of The Plate Not Less Than 1.5Mtr Below The Normal Ground Level Connected To Galvanised Wire 4Mm Dia By Means Of Bolts, Nuts, Check Nuts And Washers Of Galvanised Iron.Earth Wire Protected By Gi Pipe 15 Mm Bore(Medium Grade) And Connected To Main Switch Board Or Main Control Board As Directed And As Specified And Shown In Electrical Plate No. 3 Of Ssr Part I (2009) Including Necessary Concrete Pit In Plain Cement Concrete (1:3:6) Type C1, Pre-Cast Reinforced Cement Concrete (1:2:4) Type B1 Cover Slab 40 Cm X 40Cm X 5Cm Reinforced With 8Mm Dia Tmt Bars @ 15Cm C/C With One Handle For Lifting Made Out Of 8Mm Dia Bar, Funnel, Wire Mesh, 20Mm Dia Gi Pipe Medium Grade For Watering, Charcoal Or Coke And Salt In Alternate Layers Including Necessary Excavation And Earth Work In Any Type Of Soil And Testing Complete All As Directed By Engineer-In-Charge. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 8 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed To Wall On Pvc Board Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 4 Way 200 annual periodical maintenance Rated Busbar Single Pole And Neutral Fixed To Wall On Pvc Board Complete All As Specified And Directed. , Supply And Fix Sheet Metal Enclosures For Dbs Double Door When Mcbs To Be Used 230 Volts 4 Way 200 annual periodical maintenance Rated Busbar Triple Pole And Neutral Fixed To Wall On Pvc Board Complete All As Specified And Directed. , S&F Mcb Tpn Having Braking Capacity 10Ka, 63 Amps, 240 V Complete All As Specified And Directed. , S&F Mcb Spn Having Braking Capacity 10Ka, 32 Amps, 240 V Complete All As Specified And Directed. , S&F Mcb Sp Having Braking Capacity 10Ka, 6 To 32 Amps, 240 V Complete All As Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 63/100 Amps With Ultimate Breaking Capacity 16 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S & F In Replacement Of Mccb, 04 Pole, Capacity 125 Amps With Ultimate Breaking Capacity 16 Ka At 415 Volts With Fixed Thermalsettings Conforming To Iec 60947 Part-I/Is-13947 Part-I , (Ics=Icu=100%) In The Existing Panel With Suitable Connecting Copper Terminals At Site Complete All Specified And Directed. , S&F In Replacement Of Distribution Board Vertical Type Tpn 415 Volt For Fixing 4 Pole Mccb, Double Door Ip 43 Protection, 4 Way With Copper Bus Bars, Neutral Links , Earth Link, Earthing Studs, Blanking Plates, Interconnection Between Incomer Mccb And Bus Bar Duly Prewired Fixed Flush To Wall / Other Surface Complete All As Specified And As Directed. , S&F Single Pole And Neutral Enclosure With A Two Pin And Earth Plug And Socket Complete With One Single Pole Mcb Of Capacity 20A Complete All As Specified And Directed , Taking Down Of Defective Geyser Of Any Capacity From Different Locations For Repair Including Removing Of Electric Connection, Pipe Fitting Without Any Damage And Refixing The Same After Repair In Same/Desired Location Complete All As Specified & Directed. Note :- The Parts Required For Repair Shall Be Measured Separately Under Relevent Item , S&F Copper/Ss Body Inner Shell Suitable For Water Storage Heater (Geyser) Of 50 Ltr Capacity As Per Sample Including Taking Down Old Unsv Steel/Copper Tank Complete All As Specified And As Directed , S&F Outer Body Of Water Storage Heater (Geyser)Of 50 Ltr Capacity As Per Sample Including Taking Down Old Unsv Outer Body Complete All As Specified And As Directed , S&F Copper/Ss Body Inner Shell Suitable For Water Storage Heater (Geyser) Of 25 Ltr Capacity As Per Sample Including Taking Down Old Unsv Steel/Copper Tank Complete All As Specified And As Directed , S&F Outer Body Of Water Storage Heater (Geyser)Of 25 Ltr Capacity As Per Sample Including Taking Down Old Unsv Outer Body Complete All As Specified And As Directed , M&L For Glass Wool Packing Required For Cover The 25/50 Ltrs Copper Inner Shell To Avoid The Heat Conduction Including Taking Out Old Packing All As Specified & Directed. , S&F Heating Coil 1500 Watt In Existing Storage Water Heater(Geyser) Suitable For 25 Ltrs Capacity All As Specified & Directed. , S&F Heating Coil 2000 Watt In Existing Storage Water Heater(Geyser) Suitable For 25/50 Ltrs Capacity All As Specified & Directed. , S&F Thermostat Range Of 30-80 Degree, As Per Site Requirement, Size As Per Sample All As Specified & Directed. , S&F Non Return Valve Brass Suitable Of 15 Mm Dia Including Taking Down All As Specified & Directed. , S&F Indicator Lamp Red/Green Colour Suitable For Storage Water Heater Any Capacity All As Specified & Directed. , S&F Steel Pipe Connection 45 Cm Long Both End Brass Suitable For Hot Water Supply And Screw Down 15 Mm Gi Pipe Complete All As Specified & Directed. , S&F Steel Pipe Connection 60 Cm Long Both End Brass Suitable For Hot Water Supply And Screw Down 15 Mm Gi Pipe Complete All As Specified & Directed. , M&L For Replacement Of 12 X 100 Mm Bolts Grouting In Bricks Masonary Wall With 1:4 Cm For Mounting Geyser All As Specified & Directed. , S&F Geyser Base Plate Front & Rear Suitable For Existing Geyser Of Capacity 25/50 Ltrs Complete All As Specified & Directed. , S & F Incl Leakage Testing Galvanised Steel Water Tubing Medium Grade 15 Mm Dia Bore With All Fittings Such As Bends, Elbow, Socket, Reducer Etc, Laid Under Floor / Trenches All As Specified & Directed. , S&F 15Mm Bib Tap Cast Copper Alloy With Crutch Or Butterfly Handle, Screwed Down, Screwed For Iron Pipe Or For Brass Ferrule And Fixed All As Specified & As Directed By Engr-In-Charge. , Taking Down Of Defective Exhaust Fan Any Capacity/Make/Model/Size From Its Original Locations For Repair Including Sealing Of Cable End , Dismantling Blades, Clamps With Bush, Louvers & Motors, Refixing The Same After Repair & Assembling Complete Set In Same Location Etc Including Testing Complete All As Specified & Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Suitable For Exhaust Fan 200 Mm Sweep Plastic Body. , S&F In Repair/Replacement Of Fan Blade Suitable For Exhaust Fan 200 Mm Sweep Plastic Body. , S&F In Repair/ Replacement Of Old Unservisable Of Frame Made With Engineering Plastic Complete Suitable For 200 Mm Exhaust Fan Plastic Body White Colour All As Directed , Supply Only Louvers Suitable For Exhaust Fans 225/230 Mm Sweep. , Supply Only Louvers Suitable For Exhaust Fans 300Mm Sweep. , Supply Only Louvers Suitable For Exhaust Fans 450Mm Sweep. , S&F In Repair/Replacement Of Exhaust Fan Motor Metal Body Suitable For Exhaust Fans 300 Mm Sweep. , S&F In Replacement Of Old Unservisable Of Frame With Three/Four Legs Suitable For 300 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , S&F In Replacement Of Old Unservisable Of Fan Blade With Split Pin Suitable For 300 Mm Exhaust Fan Of Smoke Grey Colour All As Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Metal Body Suitable For Exhaust Fans 450 Mm Sweep. , S&F In Replacement Of Old Unservisable Of Frame With Three/Four Legs Suitable For 450 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , S&F In Replacement Of Old Unservisable Of Fan Blade With Split Pin Suitable For 450 Mm Exhaust Fan Of Smoke Grey Colour All As Directed , S&F In Repair/Replacement Of Exhaust Fan Motor Metal Body Suitable For Exhaust Fans 225/230 Mm Sweep , S&F In Replacement Of Old Unservisable Of Frame With Three Legs Suitable For 225/230 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , S&F In Replacement Of Old Unservisable Of Fan Blade With Split Pin Suitable For 225/230 Mm Exhaust Fan Metal Body Of Smoke Grey Colour All As Directed , Supplying, Laying, Jointing & Testing Cable Xlpe Insulated Screened Pvc Bedded, Galvanized Steel Strip Or Wire Armoured, Electric Power Cables (Heavy Duty) With Stranded Aluminum Conductor, 1100 Volts Grade, Of Size 16 Sqmm 4 Core As Per Is 7098 Pt-Ii Laid In Trenches / Ducts / Encased In Gi Pipe / Fixed To Pole Complete All As Directed And Specified. , Description All As Per Item No 82 Above But Of Size 16 Sqmm 2 Core , Taking Down Point Wiring Carefully Copper/ Aluminum (Light,Fan, Socket Or Power) Complete (Fittings Such As Switches Ceiling Rose, Pendents, Regulators, Sockets Etc) , Taking Down Main Switches, Dbs Alongwith Existing Board And Removing The Same From The Site And Making Good The Disturb Surfaces / Portion Of The Wall Etc All Specified And Directed By Eic. , Excavation In Trenches In Any Type Of Soil Not Exc 1.5 Mtrs Wide And Not Exc 1.5 Mtr In Depth For Laying Of Pipe/ Cables/ Poles Etc And Getting Out Any Type Of Soil Complete All As Specified And As Directed. , Returning Fitting In Any Type Of Soil Including Spreading Leveling Watering And Well Ramming In Layers N.Exc 25 Cm Complete All As Specified And As Directed. , Removing Excavated Soils To A Distance N.Exc. 50 Mtr And Depositing Where Directed At A Level Not Exc 1.5 M Above The Starting Point Complete All As Specified And As Directed. , M & L For Laying Of Fine, Clean Sand (River Sand) Free From Sharp Materials And Stone Particals In Trenches For Cushioning Of Cable 8 Cm Thick Under Cable And 15 Cm Thick Over The Cable Including Gently Punning Complete All As Specified And Directed. Note:- The Total Thickness Of Sand Shall Be Measured 18 Cm After Punning. , Supply And Laying Un-Reinforced Precast.Concrete Cable Protection Cover Of Class Lv, Type-1, Flat Size 250Mm X 150Mm X 40 Mm, Local Made Super Quality Complete All As Specified And Directed. , Supply And Laying Galvanised Tube Light Grade Isi Marked Of Size 40 Mm Dia Incl All Fittings In Trenches/Fixed On Pole/Wall/Floor Or Laid In Position Including Repairing Of Demolished Cemented Portion Complete All As Specified And Directed. , S&F Led Driver Suitable For 18W Led Light Complete All As Specified And Directed. , S&F Led Driver Suitable For 36W Led Light Complete All As Specified And Directed.
Contract Date: Ref. Documents Contract Value : Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 8
Arunachal Pradesh View Result →
48.
Housing Urban and Rular Development #11144599 Technical Bid
Tender For Tourism Development And Beautification Of Paataleshwar Mandir At Gram Sabha Kalpi Dist- Jalaun- 1 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-In-Charge. Dsr 2.6.1 Dsr 2.6.1 2 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size) Dsr 4.1.8 3 Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: Dsr 2.35.3.1 4 Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. Dsr 2.25(A) 5 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. Dsr 2.27 6 Boring With Hydraulic Piling Rigs With Power Units, Providing And Installing Cast In Situ Single Under Reamed Piles Of Specified Diameter And Length Below Pile Cap In M-25 Cement Concrete, To Carry A Safe Working Load Not Less Than Specified, Excluding The Cost Of Steel Reinforcement But Including The Cost Of Boring With Bentonite Solution And The Length Of The Pile To Be Embedded In Pile Cap Etc. All Complete. (Length Of Pile For Payment Shall Be Measured Upto To The Bottom Of Pile Cap) : 300 Mm Dia Piles Dsr 20.3.1 7 Vertical Load Testing Of Piles In Accordance With Is 2911 (Part Iv) Including Installation Of Loading Platform By Kentledge Method And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification & The Direction Of Engineer In-Charge. 1.Initial Test Dsr 20.6.1 8 Vertical Load Testing Of Piles In Accordance With Is 2911 (Part Iv) Including Installation Of Loading Platform By Kentledge Method And Preparation Of Pile Head Or Construction Of Test Cap And Dismantling Of Test Cap After Test Etc. Complete As Per Specification & The Direction Of Engineer In-Charge. 2.Routine Test Dsr 20.6.1.2 9 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 5.1.2 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii): 3 Graded Stone Aggregate 20 Mm Nominal Size) Dsr 5.1.2 10 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. Dsr 5.9.1 11 Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 5.2.2 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size) Dsr 5.2.2 12 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete. Dsr 5.9.6 13 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size). Dsr 5.3 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers Dsr 5.9.5 15 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Suspended Floors, Roofs, Landings, Balconies And Access Platform Dsr 5.9.3 16 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. Dsr 5.22.6 17 Brick Work With Bricks Of Class Designation 15 (Class-150) In Foundation And Plinth In: Cement Mortar 1:6 (1 Cement : 6 Coarse Sand (Fm 1.50 To 2.00)) Dsr Ar 18 Brick Work With Bricks Of Class Designation 15 (Class-150) In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:6 (1 Cement : 6 Coarse Sand (Fm 1.50 To 2.00)) Dsr Ar 19 Half Brick Masonry With Bricks Of Class Designation 15 (Class-150) In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement : 4 Coarse Sand (Fm 1.50 To 2.00)) Dsr Ar 20 12 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6(1 Cement: 6 Coarse Sand) Dsr 13.4.2 21 15 Mm Cement Plaster On Rough Side Of Single Or Half Brick Wall Of Mix: 1:6(1 Cement: 6 Coarse Sand) Dsr 13.5.2 22 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding Tor.C.C. Projections. Dsr 5.30 23 Providing And Fixing 1St Quality Ceramic Glazed Floor Tiles Conforming To Is : 15622 (Thickness To Be Specified By The Manufacturer ) Of Approved Make In All Colors, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer-In-Charge In Skirting, Risers Of Steps And Dados Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. Dsr 11.37A 24 Providing And Fixing Ist Quality Ceramic Glazed Wall Tiles Conforming Tois: 15622 (Thickness To Be Specified By The Manufacturer), Of Approvedmake, In All Colours, Shades Except Burgundy, Bottle Green, Black Ofany Size As Approved By Engineer-In-Charge, In Skirting, Risers Of Stepsand Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement : 3Coarse Sand) And Jointing With Grey Cement Slurry @ 3.3Kg Per Sqm,Including Pointing In White Cement Mixed With Pigment Of Matching Shadecomplete. Dsr 8.31 25 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Bespecified By The Manufacturer) With Water Absorption Less Than 0.08%And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades,Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting Thejoints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm Dsr 11.41A.3.1 26 Providing And Laying Polished Granite Stone Flooring In Required Designand Patterns, In Linear As Well As Curvilinear Portions Of The Building Allcomplete As Per The Architectural Drawings With 18 Mm Thick Stone Slabover 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With Whitecement Slurry Admixed With Pigment Of Matching Shade Includingrubbing, Curing And Polishing Etc. All Complete As Specified And Asdirected By The Engineer-In-Charge. Polished Granite Stone Slab Of Colour Black, Cherry/Rubyred Or Equivalent Dsr 11.56.1 27 Providing And Fixing Factory Made Upvc Glazed/Wire Mesh Windows/Doors Comprising Of Lead Free Upvc Multi-Chambered Frame, Sash And Mullion/Coupler (Where Ever Required) Extruded Profiles Having Minimum Wall Thickness Of 1.70 Mm For Series R1 And R2 Profiles And 2.10 Mm For Series R3 And R4 Profiles Conforming To En: 12608 In Any Shape, Colour And Design Duly Reinforced With Galvanized Mild Steel Section Made Of Required Shape & Size As Per Cpwd Specification, Upvc Extruded Glazing Beads, Interlocks And Inline Sash Adaptor (Where Ever Required) Of Appropriate Dimension, Epdm Gasket, Hardware, Ss 304 Grade Fasteners Of Minimum 8 Mm Dia With Countersunk Head, Comprising Of Matching Polyamide Pa6 Grade Sleeve For Fixing Frame To Finished Wall As Per Is 1367 : Part 1 To 14, Plastic Packers, Plastic Caps And Necessary Stainless Steel Screws Etc. Profile Of Frame, Sash & Mullion (If Required) Shall Be Mitred Cut And Fusion Welded/Mechanically Jointed Duly Sealed At All Corners, Including Drilling Of Holes For Fixing Hardware And Drainage Of Water Etc. After Fixing Frame The Gap Between Frame And Adjacent Finished Wall Shall Be Filled With Weather Proof Silicon Sealant Over Backer Rod Of Approved Size And Quality, All Complete As Per Approved Drawing Conforming To Cpwd Specification & Direction Of Engineer-In-Charge. Section Of Steel Reinforcement And Cross Sections Of Upvc Profiles To Be As Per Design Approved By Engineer-In-Charge. Wire Mesh / Glazing Of Plain/ Toughened/ Laminated/ Double Glass Unit With / Without High Performance Coatings As Per Design Requirements And Conforming To Is: 3548 & Is: 16231 Shall Be Paid Separately. Note:- Structural Design Proof Checked From A Government Engineering Institute, To Be Provided By The Manufacturer For : (I) Sites With Basic Wind Speed > 45 M/Sec As Per Is 875 – Part 3 (Ii) Sites With Structure Height More Than 20M For All Wind Speeds. Three Track Three Panels Sliding Window With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (98Mm & Above) X (40Mm & Above) & Both Glazed And Fly Screen Sash (30Mm & Above) X (55Mm & Above) With Zinc Alloy (Zamak) Powder Coated Handle On Every Glazed Panel Along With Multi-Point Locking System. (Height Upto 1.2M). Dsr 9.147.A4.1 28 Three Track Three Panels Sliding Door With Two Glazed & One Wire Mesh Panels With Aluminium Channel For Roller Track, Wool Pile, Zinc Alloy (Zamak) Powder Coated Handle On Two Panels Along With Multi-Point Locking System, Adjustable Nylon Rollers With Ss 304 Body. Using R3 Series With Frame (98 Mm & Above) X (40 Mm & Above) & Both Glazed And Fly Screen Sash (30 Mm & Above) X (74 Mm & Above). (Height Upto 2.5 Metre). Dsr 9.147.B3.1 29 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) Dsr 21.3.2 30 Filling The Gap In Between Aluminium/ Stone/ Wood Frame And Adjacent Rcc/Brick/ Stone/ Wood/ Ceramic/ Gypsum Work By Providing Weather/Structural Non Sag Elastomeric Pu Sealant Over Backer Rod Of Approved Quality As Per Architectural Drawings And Direction Of Engineer-In-Charge Complete, Complying To Astm C920, Din 18540- F & Iso 11600. Upto 5Mm Depth And 5 Mm Width Dsr 21.19.1 31 Providing And Fixing Fly Proof Galvanized M.S. Wire Gauge To Windows And Clerestory Windows Using Wire Gauge With Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm All Complete. With 12 Mm Mild Steel U Beading Dsr 9.51.2 32 Distempering With Oil Bound Washable Distemper Of Approved Brandand Manufacture To Give An Even Shade : New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Dsr 13.41.1 33 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqmover And Including Priming Coat Of Exterior Primer Applied@ 2.20 Kg/10 Sqm) Dsr 13.46.1 34 Providing And Applying White Cement Based Putty Of Average Thickness1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wallsurface To Prepare The Surface Even And Smooth Complete. Dsr 13.80 35 Providing And Laying Integral Cement Based Water Proofing Treatmentincluding Preparation Of Surface As Required For Treatment Of Roofs,Balconies, Terraces Etc Consisting Of Following Operations: Applying A Slurry Coat Of Neat Cement Using 2.75 Kg/Sqm Ofcement Admixed With Water Proofing Compound Conformingto Is. 2645 And Approved By Engineer-In-Charge Over The Rccslab Including Adjoining Walls Upto 300 Mm Height Includingcleaning The Surface Before Treatment.(B) Laying Brick Bats With Mortar Using Broken Bricks/Brick Bats 25 Mm To 115 Mm. With Average Thickness Of 120Mm & Minium Thickness At Khurra As 65 Mm Dsr 22.7.1 36 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1 M X1 M X 400Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarsesand) And A Coat Of Neat Cement, Rounding The Edges And Makingand Finishing The Outlet Complete.M Dsr 12.22 37 Providing Gola 75X75 Mm In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Stone Aggregate 10 Mm And Down Gauge), Including Finishing With Cement Mortar 1:3 (1 Cement : 3 Fine Sand) As Per Standard Design : In 75X75 Mm Deep Chase. Dar 12.21.1 38 Supplying, Fabricating, Transporting, Hoistingand Fixing In Position Good Quality Of 70 Mm Redsandstone In Various Elements For All Levels.Stone Shall Be Free From Cracks, Lines Stains Andeven In Shade For Each Element. The Stone Shall|Be Fine Grained And Reddish Or Buff-Colored(Locally Available). The Work Shall Be Carried Outas Per Attached Drawings With Different Process|Of I.E Carving (Manual/ By Machine), Ornamentalwork, Traditional Work, Figure Work (Any Type,Any Size), Cnc Cutting, Moulding. The Carvingand Molding Work Shall Be Of Very Good Quality.|The Stones To Be Fixed In Line, Level And Plumb Inall Respect With The Use Of Brass Clamps, Pins, (To|Be Paid Separetely) Dowels, Cement Slurry With|Matching Pigment And Epoxy Of Akemigermany, Ardex Endura, Myk Laticrete Orjapproved Make As Required And As Approved Bythe Architects. Dsr Ar 39 Providing And Fixing Water Closet Squatting Pan (Indian Type W.C. Pan) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required. White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rests Dsr 17.1.1 40 Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : 17.2.1 W.C. Pan With Isi Marked White Solid Plastic Seat And Lid Dsr 17.2.1 41 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require White Vitreous China Flat Back Wash Basin Size 550X 400 Mm With Single 15 Mm C.P. Brass Pillar Tap Dsr 17.7.4 42 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete 32 Mm Dia C Dsr-17.28.1.1 43 Providing And Fixing Ptmt Soap Dish Holder Having Length Of 138 Mm, Breadth 102 Mm, Height Of 75 Mm With Concealed Fitting Arrangements. Weighing Not Less Than 106 Gms. Dsr 18.65 44 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. Dsr 17.31 45 Providing And Fixing 8 Mm Dia C.P. / S.S. Jet With Flexible Tube Upto 1 Metre Long With S.S. Triangular Plate To Eureopean Type W.C. Of Quality And Make As Approved By Engineer - In -Charge. Dsr 17.16A 46 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. External Work. 100 Mm Nominal Inner Dia Pipes Dsr 18.9.9 47 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. External Work. 80 Mm Nominal Inner Dia Pipes Dsr 18.9.8 48 Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron/Cast Iron (Spun) Pipe Embedded In And Including Cement Concrete Blocks 10X10X10 Cm Of 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), Including Cost Of Cutting Holes And Making Good The Walls Etc. For . 100 Mm Dia Pipes Dsr 17.37.1 49 Providing And Fixing M.S. Holder-Bat Clamps Of Approved Design To Sand Cast Iron/Cast Iron (Spun) Pipe Embedded In And Including Cement Concrete Blocks 10X10X10 Cm Of 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), Including Cost Of Cutting Holes And Making Good The Walls Etc. For . 75 Mm Dia Pipes Dsr 17.37.2 50 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Rain Water Pipes Conforming To Is : 13592 Type A, Including Jointing With Seal Ring Conforming To Is : 5382, Leaving 10 Mm Gap For Thermal Expansion, (I) Single Socketed Pipes. 110 Mm Dia Pipes Dsr 12.41.2 51 Making Khurras 45X45 Cm With Average Minimum Thickness Of 5 Cm Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate Of 20 Mm Nominal Size) Over P.V.C. Sheet 1 M X1 M X 400 Micron, Finished With 12 Mm Cement Plaster 1:3 (1 Cement : 3 Coarse Sand) And A Coat Of Neat Cement, Rounding The Edges And Making And Finishing The Outlet Complete. Dsr 12.22 52 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To Unplasticised Pvc Rain Water Pipes By Means Of 50X50X50 Mm Hard Wood Plugs, Screwed With M.S. Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) And Making Good The Wall Etc. Complete. 110 Mm Dsr 12.43.2 53 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 25 Mm Nominal Outer Dia Pipes Dsr 18.7.3 54 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 32 Mm Nominal Outer Dia Pipes Dsr 18.7.4 55 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, Including Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Direction Of Engineer In Charge. Internal Work - Exposed On Wall 40 Mm Nominal Outer Dia Pipes Dsr 18.7.5 56 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 18.8.1 15 Mm Nominal Outer Dia Pipes Dsr 18.8.1 57 Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I/C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge. Concealed Work, Including Cutting Chases And Making Good The Walls Etc. 20 Mm Nominal Outer Dia Pipes Dsr 18.8.2 58 Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions 15 Mm Nominal Bore Dsr 18.21.2.1 59 Providing And Fixing C.P. Brass Bib Cock Of Approved Quality Conforming To Is:8931 : 18.49.1 15 Mm Nominal Bore Dsr 18.49.1 60 Providing And Fixing C.P. Brass Long Nose Bib Cock Of Approved Quality Conforming To Is Standards And Weighing Not Less Than 810 Gms. 15 Mm Nominal Bore Dsr 18.50.1 61 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 18.53.1 15Mm Nominal Bore Dsr 18.53.1 62 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) : 25 Mm Nominal Bore Dsr 18.17.1 63 Providing And Fixing Brass Stop Cock Of Approved Quality : 15 Mm Nominal Bore Dsr 18.16.1 64 Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank Of Approved Brand And Manufacture With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank. Dsr 18.48 65 Excavating Trenches By Mechinical / Manual Means Of Required Width For Pipes, Cables, Etc Including Excavation For Sockets, And Dressing Of Sides, Ramming Of Bottoms, For All Depth, Including Getting Out The Excavated Soil, And Then Returning The Soil As Required, In Layers Not Exceeding 20 Cm In Depth, Including Consolidating Each Deposited Layer By Ramming, Watering, Etc. And Disposing Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M : All Kinds Of Soil,Pipes, Cables Etc. Exceeding 80 Mm Dia. But Not Exceeding 300 Mm Dia Dsr 2.10.1.2 66 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 (1 Cement : 1 Fine Sand) Including Testing Of Joints Etc. Complete : 19.1.1 100 Mm Diameter Dsr 19.1.1 67 Providing, Laying And Jointing Glazed Stoneware Pipes Class Sp-1 With Stiff Mixture Of Cement Mortar In The Proportion Of 1:1 (1 Cement : 1 Fine Sand) Including Testing Of Joints Etc. Complete 150 Mm Diameter Dsr 19.1.2 68 Providing And Laying Cement Concrete 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design : 19.2.1 100 Mm Diameter S.W. Pipe Dsr 19.2.1 69 Providing And Laying Cement Concrete 1:5:10 (1 Cement : 5 Coarse Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) All-Round S.W. Pipes Including Bed Concrete As Per Standard Design :150 Mm Diameter S.W. Pipe Dsr 19.2.2 70 Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 Dsr 19.4.2.1 71 Constructing Brick Masonry Manhole In Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) With R.C.C. Top Slab With 1:2:4 Mix (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 Dsr 19.7.1.1 72 Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Mdular Type Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. Group A Dsr 1.10.3 73 Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Alongwith 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. Dsr 1.12 74 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required. 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire. Dsr 1.14.1 75 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required. 2 X 2.5 Sq. Mm + 1X 2.5 Sq. Mm Earth Wire. Dsr 1.14.2 76 Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required. 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire. Dsr 1.14.4 77 Supplying And Fixing Metal Box Of 150 Mm X 75 Mm X 60 Mm Deep (Nominal Size) On Surface Or In Recess With Suitable Size Of Phenolic Laminated Sheet Cover In Front Including Providing And Fixing 3 Pin 5/6 A Socket Outlet And 5/6 A Piano Type Switch, Connections, Painting Etc. As Required. Dsr 1.29 78 Supplying And Fixing 20 Amps, 240 Volts, Spn, Industrial Type Socket Outlet, With 2 Poles And Earth Metal Enclosed Plug Top Along With 20 Amps. \C\ Curve, Sp Mcb In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Outlet, And Complete With Connections, Testing And Commissioning Etc. As Required. Dsr 2.18 79 Supply And Fixing Two Module Stepped Type Electronic Fan Regulator On The Existing Modular Plate Switch Box Including Connections But Excluding Modular Plate Etc. As Required. Dsr 1.25 80 Supply And Fixing Modular Blanking Plate On The Existing Modular Plate & Switch Box Excluding Modular Plate As Required. Dsr 1.26 81 Supply And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required : 20 Mm. Dsr 1.21.1 82 Supply And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required : 25 Mm. Dsr 1.21.2 83 Supply And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required : 32 Mm. Dsr 1.21.3 84 Supplying And Fixing 5 Amps. To 32 Amps. Rating, 240 Volts `C Series, Miniature Circuit Breaker (Mcb)Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. Single Pole Dsr 2.10.1 85 Supplying & Fixing Single Pole, Blanking Plate In The Existing Mcb Db Complete Etc. As Required. Dsr 2.11 86 Supplying And Fixing Following Rating, Double Pole, 240 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. 40 Amps Dsr 2.12.1 87 Supplying And Fixing Following Way, Sp&N, Sheet Steel, Mcb Distribution Board, 240 V On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb / Rccb / Isolator). 6 Way, Double Door Dsr 2.3.1 88 Supplying And Fixing Following Way, Horizontal Type Tp&N, Sheet Steel Mcb Distribution Board, 415 V On Surface /Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required (But Without Mcb / Rccb / Isolators). 4 Way (4 + 12), Double Door Dsr 2.4.1 89 Earthing With Gi Earth Plate 600Mm X 600 Mm X 6Mm Thick Including Accessories And Providing Masonary Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc, With Charcoal/ Coke And Salt As Required. Dsr 5.4 90 Supplying And Laying 25 Mm X 5 Mm. G.I. Strip At 0.50 Metre Below Ground As Strip Earth Electrode, Including Connection/ Terminating With G.I. Nut, Bolt, Spring, Washer Etc. As Required. (Jointing Shall Be Done By Overlapping And With 2 Sets Of G.I. Nut Bolt & Spring Washer Spaced At 50Mm) Dsr 5.9 91 Providing And Fixing 25 Mm X 5 Mm G.I. Strip In 40 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Nut, Bolt, Spring, Washer Excavation And Re-Filling Etc. As Required. Dsr 5.11 92 Providing And Fixing 25Mm X 5 Mm G.I Strip On Surface Or In Recess For Connections Etc. As Required. Dsr 5.15 93 Providing And Fixing M.V. Danger Notice Plate Of 200Mmx150Mm Made Of Mild Steel, Atleast 2Mm Thick And Vitreous Enamelled White On Both Sides And With Inscription Single Red Colour On Frlsont Side As Required. Dsr 2.21 94 Providing And Fixing Circular/ Hexagonal Cast Iron Or M.S. Sheet Box For Ceiling Fan Clamp, Of Internal Dia 140 Mm, 73 Mm Height, Top Lid Of 1.5 Mm Thick M.S. Sheet With Its Top Surface Hacked For Proper Bonding, Top Lid Shall Be Screwed Into The Cast Iron/ M.S. Sheet Box By Means Of 3.3 Mm Dia Round Headed Screws, One Lock At The Corners. Clamp Shall Be Made Of 12 Mm Dia M.S. Bar Bent To Shape As Per Standard Drawing. Dsr Civil 10.18 95 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections Butexcluding Modular Plate Etc. As Required. 5/6 A Switch Dsr 1.24.1 96 Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections Butexcluding Modular Plate Etc. As Required. 3 Pin 5/6 A Socket Outlet Dsr 1.24.4 97 Supplying And Fixing Following Size/ Modules, Gi Box Alongwith Modular Base & Cover Plate For Modular Switches In Recess Etc. As Required. 1 Or 2 Module (75Mmx75Mm) Dsr 1.27.1 98 Installation, Testing And Commissioning Of Pre-Wired, Flourescent Fitting / Compact Fluorescent Fitting Of All Types, Complete With All Accessories And Tubes Etc. Directly On Ceiling / Wall, Including Connection With 1.5 Sq. Mm. Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. Dsr 1.41 99 Installation, Testing And Commissioning Of Ceiling Fan Including Wiring The Down Rod Of Standard Length (Upto 30 Cm.) With 1.5 Sq. Mm. Frls Pvc Insulated, Copper Conductor, Single Core Cable, Including Providing And Fixing Phenolic Laminated Sheet Cover On The Fan Box Etc. As Required. Dsr 1.45 100 Supply, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee 5 Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc) Motor, Class Of Insulation: B, 3 Nos. Blades, 30 Cm Long Down Rod, 2 Nos. Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85, Air Delivery Minimum 215 Cmm, 350 Rpm (Tolerance As Per Is : 374-2019), Thd Less Than 10%, Remote Or Electronic Regulator Unit For Speed Control And All Remaining Accessories Including Safety Pin, Nut Bolts, Washers, Temperature Rise=75 Degree C (Max.), Insulation Resistance More Than 2 Mega Ohm, Suitable For 230 V, 50 Hz, Single Phase Ac Supply, Earthing Etc. Complete As Required. Dsr 19.1 101 Supply Of Led Tube Light With Metal Heavy Duty Box Type Batten Light Fitting 2X22 Watt Suitable For Upto 2X22 Watt Led Polycarbonate Tube Light Complete Including Tube Suitable For Both Surface & Suspended Complete In All Respect. Mr 102 Supply Of Recess/Surface Mounting Round 10 W To 15 W Led Cut Out Min 125 Mm, Height Min. 40Mm, Led Down Lighiter Having Powder Coated Die Cast Aluminium Housing With Heat Shink,Diffuser/Reflector And Driver Set. Suitable For 24Hr Continuous Operation, Complete In All Respect. Mr 103 Supply And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. 16 Sq. Mm 4 Core Mr 104 Supply And Laying Of Aluminium Conductor Pvc Insulated Armoured Served Sheathed Cables 1100 Volts Grade At A Depth Of 750 Mm Below Ground Level Over A Cushion Of 75 Mm. Thick Sand All Around And Protected With Burnt Bricks On Sides And On Top. On Surface The Cable Run Shall Be Fixed On M.S. Clamps Etc. Of Suitable Size Or As Directed By The Engineer-Incharge, Complete In All Respect. The Armouring Of The Cable Shall Be Properly Connected With The Earth Conductor By Clamps Etc. 35 Sq. Mm 3-1/2 Core Mr 105 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 16 Sq. Mm 4 Core Dsr 9.1.33 106 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 3½ X 35 Sq. Mm (35Mm) Dsr 9.1.21 107 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class-150 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Dsr 6.1.1 108 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Slab Dsr 5.9.20 109 Cement Plaster 1:3 (1 Cement: 3 Coarse Sand) Finished With A Floating Coat Of Neat Cement. 20Mm Thick Dsr 13.9.2 110 Cement Concrete Flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Dsr 11.3.1 111 Providing M.S. Foot Rests Including Fixing In Tank With 20X20X10 Cm Cement Concrete Blocks 1:3:6 (1 Cement:3 Coarse Sand :6Graded Stone Aggregate 20 Mm Nominal Size) As Per Standard Design With 20X20 Mm Square Bar Dsr 19.15.1 112 500 Mm Diameter C.I. Cover (Medium Duty) The Cover To Be Not Less Than 58 Kg Dsr 19.18.2 113 C.I. Plain Bend (Dsr 17.39.1.2) Dsr 17.39.1.2 114 Making Soak Pit 2.5 M Diameter 3.0 Metre Deep With 45 X 45 Cm Dry Brick Honey Comb Shaft With Bricks And S.W. Drain Pipe 100 Mm Diameter, 1.8 M Long Complete As Per Standard Design. With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 (Dsr 19.32.1) Dsr 19.32.1 115 Providing And Fixing Precast Rcc Garden Benches With Hand Rest, Each Bench Consists Of 2Nos. L-Shape Base Support In Grey Cement Colour Of Size 80Mm X 450Mm X 890 Mm And Base Width 690Mm, 1 No. Rcc Plank In Red Colour Of Size 1500Mm X 400Mm X 50Mm, And 1 No. Rcc Plank In Red Colour Of Size 1500Mm X 425Mm X 50Mm. Seating Length Of The Bench Is 1500Mm, Seating Height Of The Bench Is 450Mm And Total Height Of The Bench Is 1000Mm As Per Drawing Attached, Finishing Etc Complete And As Per The Direction Of Engineer-In-Charge. Mr 116 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvc Medium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hire And Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. (I) 110 Mm Nominal Size Dia (Dsr 23.3.1) 117 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well Unplasticized Pvc Medium Well Screen (Rms) Pipes With Ribs, Conforming To Is: 12818, Including Hire & Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Of Engineer-In-Charge. (I) 110 Mm Nominal Size Dia. (Dsr 23.4.1) 118 Supplying, Filling, Spreading & Leveling Coarse Sand Of Size Range 1.5 Mm To 2 Mm In Recharge Pit, In Required Thickness Over Gravel Layer, For All Leads & Lifts, All Complete As Per Direction Of Engineer -Incharge. (Dsr 23.7) 119 Providing And Fixing Suitable Size Threaded Mild Steel Cap Or Spot Welded Plate To The Top Of Bore Well Housing/ Casing Pipe, Removable As Per Requirement, All Complete For Borewell Of: 100 Mm Dia (Dsr 23.13.1) 120 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. 32 Mm Dia Nominal Bore (Dsr 18.12.4) 121 Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing/ Housing Pipe Of Tubewell As Per Is: 2800 (Part I), Including Necessary Bolts & Nuts Of Required Size Complete. 100 Mm Clamp (Dsr 23.14.1) 122 Providing And Fixing Bail Plug/ Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tubewell As Per Is:2800 (Part I). 100 Mm Clamp (Dsr 23.15.1) 123 S/F 1.5 H.P. Submersible Pump With Control Pannel, Cable, Columnpipe And All Accessories Complete. Mr 124 S/F Of Finolex Of Copper Cable Isi Marked Submersible Cable Size 4Sqm 4Core. Mr 125 Excavation Work By Mechanical Means (Hydraulic Excavator)/ Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soils As Directed, Within A Lead Of 50 M. Dsr 2.9.1 126 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigment Matching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : Red Sand Stone - Exposed Face Fine Dressed With Rough Backing. 30 Mm Thick Dsr 8.14.1.5 127 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required. Dsr 8.15 128 Providing And Fixing Copper Pins 7.5 Cm Long 6 Mm Diameter For Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 (1 Cement : 2 Coarse Sand), Including Making The Necessary Chases. Dsr 8.16 129 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished,Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanitycounters, Window Sills , Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cementmortar 1:4 (1 Cement : 4 Coarse Sand), Joints Treated With White Cement,Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing,Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels.Area Of Slab Over 0.50 Sqm (Granite Of Any Shade) Dsr 8.2.2.2 130 Cost Of Stone Writing. Mr 131 S/F Of Decorative 8To 16 Watt Led Bollard Luminaire With Driver Set Confirming To Ip 65 Protection Complete In All Respect. Mr 132 S/F Of Factory Wired Led Flood Light Luminaries With Die Cast Aluminium Housing Built With Driver Set Suitable For 40To50Watt Confirming T Ip 65/66 Protection Complete In All Respect. Mr 133 Preparation And Consolidation Of Sub Grade With Power Road Roller Of 8 To 12 Tonne Capacity After Excavating Earth To An Average Of 22.5 Cm Depth, Dressing To Camber And Consolidating With Road Roller Including Making Good The Undulations Etc. And Re-Rolling The Sub Grade And Disposal Of Surplus Earthwith Lead Upto 50 Metres. Dsr 16.1 134 Providing And Laying Factory Made Chamfered Edge Cement Concrete Paver Blocks In Footpath, Parks, Lawns, Drive Ways Or Light Traffic Parking Etc, Of Required Strength, Thickness & Size/ Shape, Made By Table Vibratory Method Using Pu Mould, Laid In Required Colour & Pattern Over 50Mm Thick Compacted Bed Of Sand, Compacting And Proper Embedding/Laying Of Inter Locking Paver Blocks Into The Sand Bedding Layer Through Vibratory Compaction By Using Plate Vibrator, Filling The Joints With Sand And Cutting Of Paver Blocks As Per Required Size And Pattern, Finishing And Sweeping Extra Sand. Complete All As Per Direction Of Engineer-In-Charge. 80 Mm Thick C.C. Paver Block Of M-30 Grade With Approved Color Design And Pattern. Dsr 16.91.2 135 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement Concrete In Position To The Required Line, Level And Curvature, Jointed With Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Including Making Joints With Or Without Grooves (Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5 Mm), Including Making Drainage Opening Wherever Required Complete Etc. As Per Direction Of Engineerin- Charge (Length Of Finished Kerb Edging Shall Be Measured To Calculate Volume For Payment). (Precast C.C. Kerb Stone Shall Be Approved By Engineer-In-Charge). Dsr 16.69 136 Trenching In Ordinary Soil Up To A Depth Of 60 Cm Including Removal And Stacking Of Serviceable Materials And Then Disposing Of Surplus Soil, By Spreading And Neatly Leveling Within A Lead Of 50 M And Making Up The Trenched Area To Proper Levels By Filling With Earth Or Earth Mixed With Sludge Or/And Manure Before And After Flooding Trench With Water (Excluding Cost Of Imported Earth, Sludge Or Manure). Dsr-2020 (H &L) 137 Supplying And Stacking Of Good Earth At Site Including Royalty But Including Carriage 1Km (Earth Measusred In Stacks Will Be Reduced By 20% For Payment). Dsr-2020 (H &L) 138 Supplying And Stacking At Site Dump Manure From Approved Source, Including Carriage Up To 1 Km (Manure Measured In Stacks Will Be Reduced By 8% For Payment) : Screened Through Sieve Of I.S. Designation 16 Mm Dsr-2020 (H &L) 139 Mixing Earth And Sludge Or Manure In The Required Proportion Specified Or Directed By The Officer-In-Charge.. Dsr-2020 (H &L) 140 Spreading Of Sludge, Dump Manure And/Or Good Earth In Required Thickness As Per Direction Of Officer-In-Charge (Cost Of Sludge, Dump Manure And/ Or Good Earth To Be Paid Separately). Dsr-2020 (H &L) 141 Rough Dressing The Trenched Ground Including Breaking The Clods. Dsr-2020 (H &L) 142 Fine Dressing The Ground Dsr-2020(H &L) 143 Digging Holes In Ordinary Soil And Refilling The Same With The Excavated Earth Mixed With Manure Or Sludge In The Ratio Of 2:1 By Volume (2 Parts Of Stacked Volume Of Earth After Reduction By 20% : 1 Part Of Stacked Volume Of Manure After Reduction By 8%) Flooding With Water, Dressing Including Removal Of Rubbish And Surplus Earth, If Any, With All Leads And Lifts (Cost Of Manure, Sludge Or Extra Good Earth If Needed To Be Paid For Separately) :Holes 90 Cm Dia, And 90 Cm Deep Dsr-2020 (H &L) 144 Preparation Of Beds For Hedging And Shrubbery By Excavating 60 Cmdeep And Trenching The Excavated Base To A Further Depth Of 30 Cm, Refilling The Excavated Earth After Breaking Clods And Mixing With Sludge Or Manure In The Ratio Of 8:1 (8 Parts Of Stacked Volume Of Earth After Reduction By 20% : One Part Of Stacked Volume Of Sludge Or Manure After Reduction By 8%), Flooding With Water, Filling With Earth If Necessary, Watering And Finally Fine Dressing, Leveling Etc. Including Stacking And Disposal Of Materials Declared Unserviceable And Surplus Earth By Spreading And Leveling As Directed, Within A Lead Of 50 M, Lift Up To 1.5 M Complete (Cost Of Sludge, Manure Or Extra Earth To Be Paid For Separately). Dsr-2020 (H &L) 145 Providing And Stacking Of Hamelia (10X10X600Mm) As Per Direction Of The Officer-In-Charge. Mr 146 Providing And Stacking Of Casurina Topiary (300X300X1800Mm) As Per Direction Of The Officer-In-Charge. Mr 147 Providing And Stacking Of Plumeria Alba Bushy (300X300X2400Mm ) As Per Direction Of The Officer-In-Charge. Mr 148 Providing And Stacking Of Ground Cover Grass As Per Direction Of The Officer-In-Charge. Mr
Contract Date: Ref. Documents Contract Value : Ref. Document
Boards / Undertakings / PSU No of Bidders 2
Uttar Pradesh View Result →
49.
Public Administrative Department #11142241 AOC
Construction And Carry Out Ancillary Works For Urban Ayushman Health Temples (Uhwc) In Porta Cabins At 14 Places In The Jurisdiction Of Thane Municipal Corporation.-1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. :Means Bd.A.1 Page No.259 2 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means 3 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. 4 Transportation of excavated material including loading and unloading etc. complete. (c) lead up to 5 km) 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 6 Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer incharge. 7 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 9 Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use).Spec. No As director by engineer incharge. Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Spec. No As director by engineer incharge. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. 14 Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 15 Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. 16 Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and airtight C. cover of 75 Kilogram with lid and frame fixed in cement concrete.. Spec. No. 17 Providing and laying in trenches 25 mm dai. UPVC pipe including necessary excavation, fittings. Refilling trenches etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 18 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) 19 Providing and making ISI Mark ferrule connection of 25mm dia.to water main including ferrule coupling cast iron bell mouth cover, built in non return valve and fixing including excavation and reinstatement complete. 20 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 21 Supplying, erecting, testing and commissioning of minimum three and above star rated centrifugal water pump (monoblock),230 V,single phase,50 Hz,AC.supply of 0.375kw/0.5 HP with discharge 36/9 lpm for head of 6/21 m & 25 mm suction /25 mm delivery pipe on provided CC foundation as per specification no.WP.CGP. 22 Supplying, installing and testing earthing with copper earth plate 30 x 30 x 0.315 cm complete with all accessories of copper materials and recording the results as per specification no.Ea-EP Supplying, & erecting Carbon Dioxide (CO2) fire extinguisher of 4.5 Kg.capacity cartridge type conform to IS 2878/15683 complete erected with necessary clamp made from 50 x 6 mm M.S. flat with nut & bolts rounded in wall complete. Supplying, & erecting Hand dryer machine having speed jet of warm air with low noise blower to quick dry wet hands,power 1800 W,voltage 230V,50 Hz.Automatic cut off after 5-10 second. Providing,Supplying and fixing electrical meter with all necessary accessories,required cable for connection from main supply including required permission from MSEDCL,TORRENT and Local authorities.(The contractor shall submit the original receipts of payments made to MSEDCL, Torrent Power co.The payments will be made as per the actual expenses made by contractor for each permission and purchasing of electric meter.) Supplying, erecting & terminating FR XLPE insulated, galvanised steel wire armoured (round) cable, 1100 V 3 core 10 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL Supplying and laying (including excavation) 50 mm outside dia double wall corrugated pipe (DWC) of HDPE for enclosing cable below ground/road surface to required depth completed Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht. Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. Providing, Supplying and installation of Porta Cabin Fabricated at Factory Scope of work per cabin shall includes as follows 1. Specification mentioned as below 2. Internal and external arrangement of cabin as per drawings as attached 3. Works of Plumbing, sanitary, electrification, CCTV 4. Furniture as below a. Executive Chairs (as per sr.no.3) - 3 nos, b. Visitor chair (as per sr.no.4) - 6 no c. Two seater chair (as per sr.no.5) – 2 Nos d. Three seater chair (as per sr.no.6) – 5 Nos e. Patient Examination Couch/Table (as per sr.no.8) – 2 Nos f. Storage Cabinet (as per sr.no.9) – 1 Nos g. Table (as per sr.no.10) – 4 Nos h. Table (as per sr.no.11) – 1 Nos i. Medical Store Racks in pharmacy room (as per sr.no.12) – as per drawing j. Trash Bin (as per sr.no.13) – 6 Nos k. Seating tools (as per sr.no.7) – 6 Nos Detailed Description and Specification: Unit Size – L x B x Ht = 30 ft x 20 ft x 9 ft (Clear internal Height) Cabin should be structurally stable and suitable to meet severity of climatic conditions. Sustainable in wind condition of 55m/s- in Seismic zone IV and ambient temperature range (-) 40 degree C to (+) 50 degree C. Bottom Frame 80 x 40 x 2mm GI Rectangular Hollow Pipe (Apollo Make) Stiffener Bottom 50 x 50 x 2mm GI Rectangular Hollow Pipe (Apollo Make) for Shorter Span and 80 x 40 x 2mm for longer Span making the grid of 2ft x 2ft. Please note Base frame shall be quoted with special type of anticorrosive paint to avoid rusting and for better life (i.e. Black Coal Tar Epoxy Paint) Top Frame 80 x 40 x 2 mm GI Rectangular Hollow Pipe (Apollo Make) Stiffener (Top Frame) 50 x 50 x 2mm GI Rectangular Hollow Pipe (Apollo Make) for Shorter Span and 80 x 40 x 2mm for longer Span making the grid of 2ft x 2ft. Please note Base frame shall be quoted with special type of anticorrosive paint to avoid rusting and for better life (i.e. Black Coal Tar Epoxy Paint) Paneling Outside Outside Wall of the cabin shall be made from 16 guage GI sheet with solid color of approved shade, fitted on inside GI pipe framing making the grid of 2ft x 2ft. Paneling Inside Inside wall of the cabin shall be made from 3 MM Thk ACP sheet with aluminum foil thickness of 0.25 mm with solid color of approved shade fitted on inside Gl pipe framing making the grid of 2ft x 2ft. All the ACP joints shall be filled with Black silicon. Wall Panels shall be completely insulated with Glass wool of 48 kg/m3 Density and slab thickness 50mm. Corners Pole 72 x 72 x 3.2mm GI Rectangular Hollow Pipe (Apollo Make) with black coal tar epoxy coating Plumbing Arrangement UPVC concealed internal plumbing system shall be provided with all necessary inlet and outlet points as per the Drawing. External water connection shall be Provided by TMC. Drinking Arrangement Providing and Fixing branded water purifier of make like Aquaguard, Kent, LG or equivalent with all necessary connections, fittings accessories with storage arrangement etc. complete Sanitary Fittings All plumbing and sanitary fittings such as Ceramic Western Commode with seat cover, Ceramic Indian Commode, Ceramic urinal with push pillar cock, Ceramic Wash Basin, Wash basin Push Pillar Cock shall be of brand like Kajaria, Hindware, Paryware or equivalent. All western Toilets must be equipped with jet Spray, 2 in 1 Taps and Flush Tank. Accessories for PWD persons shall be provided in all toilets. (Excluding External Sewerage Connection). Roof Outside Roof Slope 1:2 one way 126 Roof shall be made from 1.2 mm 120 GSM GI sheets of Jindal make, which shall be fully welded and sloped to avoid leakage. All the roof joints shall be covered with 75mm Butyl Vinyl Tape. Roof shall be covered with Heat Resistant paint to maintain low temperature inside the cabin. Roof Gutter Specially designed gutter section shall be provided to drain water at the single side of the cabin. This shall be made from 1.2 mm 120 GSM GI sheet Jindal make including fitting arrangement. False Ceiling False Ceiling shall be made from 3 mm Thk ACP sheet with Aluminium foil thickness of 0.25 mm with solid colour of approved shade fitted on inside GI pipe framing making the grid of 2ft x 2ft. All the ACP joints shall be filled with Black silicon. Flooring Flooring shall be made from 18 mm High Strength Bison board/ Cement fibre sheet, which is covered with 2 mm PVC vinyl flooring for cabin. For toilet Cement sheet shall be covered by 10 mm thick 1 X 2 ceramic tiles which shall be fixed by using tile adhesive and cement mixture of at least 50mm Thk. Doors & Door frame Main Door Flush door 32 mm thick waterproof material with 4mm Glass as per approved design and drawing and door frame shall be made from aluminium Section. Locking arrangement along with D Handles in SS 304, door closer, door stopper etc. Door Size: 5’x 6’ Internal doors shall be sliding doors/ flush door of size as per drawing and as per the specifications decided by engineer-in charge Toilet Door and door frame shall be made from aluminium frame with 4mm Glass and ACP including locking arrangement, Handles in SS 304, Door Size: 2’-6’’ x6’ Windows Powder coated aluminium Two Track sliding windows with 4 mm tinted Glass. Size of windows as per drawings. M.S. Grill of weight @ 20 kg per sqm shall be provided to all windows/louvered window from outside. Curtains of good quality and curtain rod/track with fixtures shall be provided from inside of windows. Insulation False Ceiling and Wall Panels shall be completely insulated with Glass wool of 48 31 Providing, Supplying and installation of Porta Cabin Fabricated at Site Scope of work per cabin shall includes as follows 32 Providing, laying and fixing exterior grade fibrilling fibre reinforcement heavy duty designer cement concrete tiles for Flooring of approved colour and design 22 +/ -2 mm thick bayer colour pigmented as per IS ..1237 - 1980 having compressive strength more than 500 Kilogram/sq.cm reaffirmed in 2006 ,having wert transvrse strenghth of 3.5 / mm 2, water absorption less than 10 % abrasion / wear resistance less than 2 mm, skid resistance more than 25.0 (ASTM:E303) and no fading as per DIN - 51094 of size 300 x 300 in plan / designed pattern on a bed of 1:4 cement mortar including cement float ,filling joints with neat cement slurry ,curing, polishing and cleaning etc. complete. For flooring. 33 Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete. 34 Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 35 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 36 Testing :- Compressive test of C.C.Cube 37 Provide and supplying Executive Chairs A generously cushioned, molded PU seat combined with breathable mesh fabric, Crafted from strong and durable Polyamide (Nylon) featuring a reinforced mesh back, chair equipped with BIFMA Certified Class-4 Hydraulic Gas Spring and BIFMA Certified 60mm Wheel Castors. Chair having 3 years warranty (Executive chairs) / or equivalent / as Directed by Engineer Incharge. Key Features Colour : GREY / Black Material : Metal Dimensions : 64D x 61W x 119H Centimeters Size : Standard Back Style : Mesh Back Special Feature : Adjustable Lumbar, Adjustable Height, Adjustable Arm Rest, Adjustable Head Support Seat Material Type : Breathable Microfiber Cloth Covered in PU Foam 38 Providing and supplying visitor chair having size Depth- 62cm, width-55cm, height- 80cm & seat height 45 cm. (+/- 2cm ), having seat & back, shall be made up of 1.2 cm hot pressed plywood, approved tapestry upto Rs.300/m and mould polyurethane foam with P.V.C. lipping all around etc. complete. The chair shall be provided with two one piece armrest made of polypropylene. The chair shall be supported by cantilever type powder coated tubular frame dia 2.54cm x 14 B G M.S.E.R.W. tube. All aluminium steel component shall have Epoxy Polyster Powder Coated. The chair shall be Ergonimc Dry film thickness shall be more than 45 Micron. And as directed by Architect in charge. The over all appearance of the product shall be as per photograph. All metal work shall be Epoxy Polyster Powder Coated and as directed by Architect in 39 Public Seating Chair. - 2 Seater Providing and Fixing 2 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish with 1 year warranty etc complete as directed by engineer in charge.. 40 Public Seating Chair. - 3 Seater Providing and Fixing 3 seater Public seating chair made of complete metal with Legs in Crome finish and seates in silver powder coating finish. 41 Seating tool for Lab and Class-IV Providing and fixing 4 legged Lab stool, Legs made of 16 Guage 45 MM Outer dimension MS Pipe, Duly painted, With a 304 Grade Stainless steel 12 inch wide seat with a 1 inch collar, Height adjustment via a screw. as per design and drawing and instructions of Engineer in charge. 42 Providing and supplying examination couch. This examination couch features an adjustable backrest that can be easily operated using a gas spring system. The twosection foam-padded top provides added comfort for patients during examinations. It is equipped with three drawers and three cabinets, offering ample storage space for medical equipment and supplies, keeping everything organized and easily accessible. A tray for the B.P. apparatus is conveniently placed near the headrest, ensuring easy access for medical professionals. The couch is finished with pre-treated epoxy powder coating, making it durable and easy to clean, while also ensuring resistance to corrosion Designed with a carrying capacity of 150-180 kg. etc complete. as directed by engineer in charge. Key Features Adjustable Backrest: The backrest is adjustable using a gas spring system, providing flexibility for various examination positions. Foam Padded, Upholstered Top: Offers comfort and support during patient examinations. Ample Storage: Equipped with three drawers and three cabinets to store medical supplies and equipment. BP Tray: A tray near the headrest for easy access to BP apparatus. 43 Providing, supplying and installing the cabinet, dimensions of 1200mm (W) x 1660mm (H) x 450mm (D) and is constructed from prime quality 0.8mm thick CRCA steel for the body panels and shelves. The shelves are adjustable in height and have a uniformly distributed load capacity of 50kg per shelf. The vertical sides feature continuous slots for mounting shelves at variable heights. The entire carcass is finished with a 50 ±10 microns epoxy polyester powder coating. The facia of the cabinet consists of metal shutters with metal borders, incorporating toughened glass panels. The handles are Dshaped in an aesthetically pleasing design with a stainless steel (SS) finish. The locking mechanism uses a metal cam lock for security. Additionally, the cabinet is equipped with adjustable levelers featuring plastic bases, allowing height adjustments of up to 15mm.This furniture is built according to the specifications and samples approved by the client. It meets the required certifications including ISO 9001:2015, ISO 14001:2015, ISO 45001:2018, BIS standards, and is a BIFMA Gold certified member. The product comes with a 5-year warranty. Installation and other details are as directed by the engineer in charge. 44 Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. The above furniture should be as per specification with 3 years warranty etc. sample approved by client. TABLE SIZE :- W1060mm x D600mm x H750 mm -1 No W900mm x D300mm x H750 mm – 1 No W600mm x D450mm x H750 mm – 2 No As Directed by Engineer Incharge 45 Providing & Fixing of HNI Make table of Size. The Worktop shall be made of 25mm Prelam particle Board of Grade II , Type-II as per IS:12823 and backing laminate of 0.6mm All the exposed edges are finished with 2mm thick PVC lipping machine pressed. Legs are made of powdered coated steel 50mmx 50mm Section. Cross Member are in CRCA steel and the Beam is made of MS of 1.5mm thickness in powder coated finish of 50 microns thickness. The above furniture should be as per specification with 3 years warranty etc. sample approved by client. TABLE SIZE :- W1200xD700xH740mm As Directed by Engineer Incharge 46 Providing and supplying adjustable MS storage rack having size 1200 mm to 1800mm x 300 mm x 1600 mm including all transportation upto site etc complete as directed by engineer in charge. Key features 1. Material  Frame : Mild steel (MS) powder coated  Shelves: Cold-rolled steel (CRCA) or galvanized  iron (GI) 2. Angle Specifications  Size 40 x 40 x 2.50 mm  Length : Standard lengths of 6 feet, 8 feet, or 10 47 Providing and supplying trash bins with a maximum height of 450mm 35 - 40 liter, made of high-quality molded plastic for durability and ease of maintenance. The bins shall be equipped with a functional lid mechanism and shall be provided as per the approved selection and design. The work shall be carried out as directed by the Engineer-In-Charge etc complete . 48 Cutting transverse contraction joints 3 to 4 mm wide and depth 60mm. in concrete slab using concrete cutting machine with diamond studded saw within 48 hours of casting of bay / slab etc. complete including subsequent widening of the groove 8 to 10 mm. wide at top having depth of 15 mm. as directed by Engineer incharge. 49 Providing and Laying M60 grade cement concrete of approved mix design with avg. Flextural strength of 4.4 MPa in 3 days from R.M.C. plant incld. use of micro silica/alcofine, approved make super plastiser and retarder, fibriliated 100 % virgin polypropylene fibres, fly ash and transported by transit mixer and placing at work site. Compacting, finishing, initial curing by approved curing compound/contractors water and tarring the sides of slab with hot bitumen as specified and as directed (w/c ratio 0.28 max.). (vatta for curing will be paid separately) for Ultra thin White Topping (UTWT) pavement. etc completed. Providing second class Burnt Brick masonry with conventional/I.S .type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete Providing structural steel work in single stanchions composed of R.S.J. Channel etc. with caps, bases, mild steel plated, angle brackets, cleats, gusset plates, anchor bolts etc. as per detailed designs and drawings or as directed including cutting, fabrication, hoisting, erecting fixing in position, making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it two. coats of oil painting approved quality and shade etc. complete. Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 One Square Meter made out of 4 mm aluminum sheet bonded with white retro reflective sheeting of Class C ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity microprismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorized distributor/convertor issued for field performance including the screen printed areas and cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% aluminum 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre) Providing and fixing reinforced cement concrete cover of size 90 cm x 45 cm with frame over inspection chamber etc. complete. Heavy duty (225 Kilogram) Providing Excavator (JCB JS 80 or equivalent) of 0.9 Cum etc complete Providing and fixing mild steel grill gate as per the detailed drawing including hinges, locking arrangements and painting in three coats of oil paint of approved colour and shade etc. complete.(weight 18 Kilogram. to 20 Kilogram. Per Sq.m.) Spec. One Number: As directed by Engineer- in-charge. Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete. Providing and laying Cast in situ/Ready Mix cement concrete M-15 trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete. Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Spec.No. : Means Bd.A.1 Page No.259 Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m) By Mechanical Means Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. Transportation of excavated material including loading and unloading etc. complete. ( (c) lead up to 5 km) Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Providing soling using 80 mm size trap metal in 15 cm. Layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. Spec. No As director by engineer in charge. Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) Providing and laying in-situ M30 Grade unreinforced plain cement concrete pavement over prepared sub base with 43 grade cement , coarse and fine aggregate( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineerin- charge. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. Providing and fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing, fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex. Engineer is necessary before use).Spec. No As director by engineer in charge. Providing and applying priming coat on concrete/ masonary / asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.Spec. No As director by engineer incharge. Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram/15 l). plaster crack should be filled by Acrylic base Crack seal/Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. Painting letters upto 20 centimetre height including cost of brushes, coir brushes dusting, cleaning etcetera complete. Spec. No. As Directed By Engineer In Charge. Only For Road Side Furniture. Spec .No. MORTH 801 Providing and laying concrete pipes of I. S. NP. class of 300 mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Spec. No. Bd.V.41 Page No.573. etc
Contract Date: May 21, 2026 Contract Value : 4.09 Crore
Local Bodies No of Bidders 2
Maharashtra View Result →
TenderDetail
Loading tenders