View Bid Results For Aliphatic Solvents Tenders

We found 14 Bid Results related to aliphatic solvents tenders. You can find Contractor details who won aliphatic solvents tenders along with contract details in Bid awards announcements section.

Filters

Active filters:

Showing 1–1 of 14 tenders matching your filters

Defence #9874901 AOC

Contract Date: Jan 30, 2026 Contract Value : ₹ 54.75 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 6

Assam View Result →

Defence #9577934 AOC

Contract Date: Feb 14, 2026 Contract Value : ₹ 35.47 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 11

Maharashtra View Result →

Educational and Research Institute #9414665 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 5

Punjab View Result →

Public Administrative Department #9365571 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Local Bodies No of Bidders 3

Maharashtra View Result →

Housing Urban and Rular Development #9352823 Technical Bid

Contract Date: Ref. Documents Contract Value : ₹ Ref. Document

Government Departments No of Bidders 3

Maharashtra View Result →

Power #8649695 AOC

Contract Date: Jan 23, 2026 Contract Value : ₹ 3.33 Crore

Boards / Undertakings / PSU No of Bidders 2

Rajasthan View Result →

Petroleum and Natural Gas #8561165 AOC

Contract Date: Ref. Documents Contract Value : ₹ 40.99 Lakh

Boards / Undertakings / PSU No of Bidders 3

Gujarat View Result →

Petroleum and Natural Gas #8350513 AOC

Bids Are invited for Pl Man Scrap B-Brsh_Heavy Scrapping And Surface Preparation - Pl Man Scrap B-Brsh ( Heavy Scrapping And Surface Preparation) As Per Painting Manual , Blast Cleaning - Blast Cleaning To Sa 2.5 , Primer Inside Pontoon Surface Tolerant Epoxy Primer - Primer Inside Pontoon_Surface Tolerant Epoxy Primermin Dft 100 Microns. , External Primer One Coat Of Inorganic Zinc Silicate Prime - External Primer_ One Coat Of Inorganic Zinc Silicate Primer With Min 85 Percent Zinc Dustconforming To Astm D520 Type Ii _Min Dft 65Microns , Primer Epoxy Zinc Phosphate Primer - Primer_Epoxy Zinc Phosphate Primer _Min Dft 40 Microns. , Intermediate Coat Two Coats Of Epoxy Micaceous Iron Oxide Mio - Intermediate Coat_Two Coats Of Epoxy Micaceous Iron Oxide Mio Of Total Min Dft 150(30+120) Microns To Be Applied With Mist Coat_Full Coat Technique. , Intermediate Coat Two Coats Of Glass Flake Epoxy With Phenalkamine - Intermediate Coat_Two Coats Of Glass Flake Epoxy With Phenalkamine Hardener- Min Dft 200 Microns Per Coat (Total Min Dft 400 Microns). , Two Coat Of Aliphatic Acrylic Polyurethane_Min Vol Solids 55 Percentage_ With Rutile Tio2 In Glossy Finish - Two Coat Of Aliphatic Acrylic Polyurethane (Min Vol Solids 55 Percent) With Rutile Tio2 In Glossy Finish _Min Dft 65 Microns. , One Coat Of Solvent Free Epoxy Phenolic Novolac - One Coat Of Solvent Free Epoxy Phenolic Novolac - Min Dft 200 Microns Per Coat. , Two Coats Of Solvent Free Epoxy Phenolic Novolac - Two Coats Of Solvent Free Epoxy Phenolic Novolac - Min Dft 200 Microns Per Coat (Total Min Dft 400 Microns) , Double Scaffolding , Letter Writing Work , Tank Logo As Per Painting Manual , Tank Colour Band Total Quantity : 50600

Contract Date: Ref. Documents Contract Value : ₹ 49.81 Lakh

Boards / Undertakings / PSU No of Bidders 6

Bihar View Result →

Public Administrative Department #8272243 AOC

Civil Work For Transfer Station And Mrf Center At Chh.Sambhajinagar- 1 clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 3 filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. 4 providing selected hard murum filling including laying in layers of 15 to 20cmwi the watering and compacting etc. complete 5 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 7 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishingand rougheningthem if special finish is to be provided and curingcomplete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 ProvidingandlayinginsitucementconcreteM30withtremixtreatmentfor200mm thicknessforflooringwithgroovecuttingof4mmwideand20mmdeepwithnecessary refilling with bitumenetc. complete. 13 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete 14 Providing and erecting structural steel for sakav with all bracing gusset plates etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/welded connection and oil painting with 2 coats of approved quality and shade etc. complete. 15 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). 16 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coaltarring the upper surface of plank etc. complete. (excluding painting to underside of plank). 17 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete 18 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 20 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 21 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. 22 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 23 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 24 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 25 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 26 Providing and fixing frame with / without ventilator of size as specified with Country cutteak wood for doors and windows including chamfering, rounding, rebating, ironholdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 27 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 28 Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing 29 Providing & fixing factory-made steel door of Single leaf Internal Plain Wood finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates , fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3 mm thick hinge r-einforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hingesof Dorset make, 30 Providing soak pit of size 120cm x 120cm x 120cm including excavating andfilling with brick-bats 31 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) 32 Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x45cm size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs andbrass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trapup to the outside face of the wall. 33 Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer isnecessary before use) 34 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 35 RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depthpercolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side fillingaround outside of RCC rings (annular space) with 40mm size boulders including filling ofpercolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravelsfollowed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washedriver fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)including netlon mesh between each gravel/fine aggregate (natural sand/crushed sandVSI grade finely washed etc.) media layer including covering with RCC slab,manhole frame & cover, PVC rungs etc. including arrangement for inlet & outletpipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive ofall labour, material, wastage, scaffolding, transportation, taxes, including all leads,lifts at all levels. All material should be of approved make. All works complete asper the drawing, technical specification and direction of the Engineer in charge 36 Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitablemethod prescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running chargesof all equipments, tools, plants & machinery required for the job, all complete as perdirection of Engineer in charge, upto 90m depth below ground level. 37 Supplying,assembling,loweringandfixinginverticalpositioninborewell,unplasticized PVCmedium well-casingpipe of150mm dia,conforming toIS:12818,includingrequired hireandlabourcharges,fittings&accessoriesetc.allcomplete,foralldepths,asperthe direction of Engineer in charge. 38 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401-- Plant Mix Method and Grading - III Material 39 Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. 40 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-incharge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 41 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. 42 Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated withanticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C andwherever directed including handling, straightening, necessary cutting supported byTMT FE 500, chairs with proper alignment by using properly designed assembly ofBulkheads lubricating half length with bituminous paint as directed etc. complete. 43 Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc 44 Turbo ventilator 24 45 20 ton Weiht Bridge 46 Standard Consistancy,Fineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness. 47 Water Absorption, Specific Gravity,Impact Value, Crushing Value. 48 Sieve Analysis. 49 Abrasion Value. 50 Flakiness Index & Elongation Index. 51 Stripping Value. (for Bituminous Work) 52 Soundness. 53 GSB Mix Design./Cement Treated Sub Base ( CTSB) 54 Wet Mix MacadamMix Design. 55 Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 56 Chloride& Sulphate Content. 57 Silt Factor. 58 Compressive Strength OF C.C. Cube (Set of 3 cubes). 59 Concrete Mix Design (With all Tests onbasic materials) 60 Flexural strength of Beam. 61 Resistance to applied Voltage. ( 1 Hr. Test ) (Set of 2 Bars) 62 Resistance to applied Voltage.( 30 Days Test )( Set of 2 Bars ) 63 Thickness of Coating. (Set of 2 Bars) 64 Chemical Resistance Test.( Set of 8 Bars ) 65 Hardness of Coating Test . 66 Salt Spray Test ( 4 Cycles ) ( Set of 2 Bars ) 67 Upto 16 mm(Set of 3 Bars) 68 Above 16 mm (Set of 3 Bars) 69 Nitrol Solution Test. (Set of 3 Bars)

Contract Date: Nov 17, 2025 Contract Value : ₹ 16.24 Crore

Local Bodies No of Bidders 2

Maharashtra View Result →

10.

Public Administrative Department #8174541 AOC

Contract Date: Oct 30, 2025 Contract Value : ₹ 2.57 Crore

Local Bodies No of Bidders 3

Maharashtra View Result →

11.

Defence #7213255 AOC

Contract Date: Apr 04, 2025 Contract Value : ₹ 1.03 Crore

Statutory Bodies & Commissions/Committees No of Bidders 5

West Bengal View Result →

12.

New and Renewable Energy #5269802 AOC

Bids Are Invited For Pure Aliphatic Solvent Based Concrete Coating River Blue Shade In 20 Ltr Pack , Monsoon Blue Shade In 20 Ltr , Jasmine Shade In 20 Ltr Pack , Compatible Thinner Total Quantity : 11540

Contract Date: Ref. Documents Contract Value : ₹ 35.21 Lakh

Government Departments No of Bidders 2

Maharashtra View Result →

13.

Defence #4489290 AOC

Bids Are Invited For Boq Items Epoxy Based Low Viscocity Primer Tech 24 Concrete Reapair Material Suitable For Application On Concrete Surfaces Make Jemkon Oblique Bostik Oblique Stp , Epoxy Based High Strength Screed Tech 60 Self Smoothing Screed Based On Epoxy Resin Levelling Layer Under Epoxy Polyurethane Floor Coating Oblique Screeds Make Jemkon Oblique Bostik Oblique Stp , Screed Mix Fq Sand 90 Make Jemkon Oblique Bostik Oblique Stp , Aquathane 500 Aliphatic Uv Stable Clear Or Pigmented Water Based Polyurethane Coating Make Jemkon Oblique Bostik Oblique Stp , Solvent Free 3 Component Epoxy Resin Mortar Screed Suitable For Repairs To Concrete Pavement In 15 Oblique 30 Kgs Bag Make Bostik Oblique Stp , Epoxy Resin Primer Suitable For Application On Concrete Surfaces To Receive Epoxy Resin Mortar, Make Bostik Oblique Stp , Instant Road Restoration Material Of 25 Kg Bag Instant Pathhole Repairing Material Make Patchmate No More Pothholes Checkmate Chemitals Pvt Ltd Oblique Bostik Total Quantity : 3215

Contract Date: Ref. Documents Contract Value : ₹ 16.23 Lakh

Statutory Bodies & Commissions/Committees No of Bidders 4

Uttar Pradesh View Result →

14.

Railways #2512682 AOC

Supply Of 2023-24 ( Ami No. 26Dl 022 ) Instrument Lubricant Spray Containing Highly Purified Medicinal Liquid Paraffin & Emulsifier, Containing Less Than 5% Non Ionic Surfactants, 30% Aliphatic Hydrocarbons, Solvents And Cfc%U2019s Free Propellant Gas, Non Toxic, Fda, Ce Marked, Equivalent To Neodisher Ip, Pack Of 400Ml. Nr Central Hospital , Nr Delhi 300.00 Numbers Nr Divisional Hospital Firozpu , Nr Punjab 12.00 Numbers => Limited

Contract Date: Oct 18, 2023 Contract Value : ₹ 5.47 Lakh

Government Departments No of Bidders 1

Uttar Pradesh View Result →

TenderDetail

Loading tenders