View Bid Results For Air Crossing Tenders

We found 752 Bid Results related to air crossing tenders. You can find Contractor details who won air crossing tenders along with contract details in Bid awards announcements section.

Indian Tenders
87
Live Opportunities India
Analytics
Click Here
Tender Intelligence
Potential Bidders
0+
Verified Vendors
Global Tenders
0
Live Opportunities Worldwide
Filters
Stage
614
73
65
Tender Publishing Platform
23
729
State / UT
34
178
107
67
57
38
35
27
25
22
19
18
18
16
14
13
13
10
9
9
9
8
7
6
4
4
4
3
3
2
2
2
1
1
1
Contract Value
226
95
336
91
Publish Date
3
0
0
0
0
Sector
22
211
155
147
51
48
29
24
21
15
12
9
7
6
5
3
2
2
1
1
1
1
1
Ownership
4
263
227
191
71
Within keyword
Active filters:
Showing 1–16 of 752 tenders matching your filters
1.
Power #11405689 Technical Bid
Tender for Carriage Of Following Material From Store Center Or From Any Other Place To The Respective Site Of Work Distence Up To 75 Km Through The Kachha Pacca Road Including The Work Of Its Loading & Unloading At The Respective Ends Also Including The Work Of Its Dragging Etc. And Also Including The Cost Of Labour, T & P And Carrier Etc. Required For Proper Completion Of Work. , Plain Cement Concrete 11 Mtr Long , Plain Cement Concrete 9 Mtr Long , Acsr Dog Conductor , Stp 13 Mtr Long , Stp 11 Mtr Long , Ms Angle Iron 65*65*6*4300Mm Bracing With Clamp , Top Channel 33 Kv , Earthing Complete , Stay Set Complete , Guarding Angle , Guarding Angle Clamp , Gi Wire 6 Swg , Gi Wire 8 Swg , 33 Kv 3*120Sqmm Xlpe Cable , 33 Kv Cross Arm Holding Clamp , F Clamp 33 Kv For Stp , 33 Kv V Type Cross Arm , Supply & Erection Of Following Material As Per Uppcl/Dvvnl/Respo Norms And Standard/Related Is , Stone Pad , Loop Insulator , Number Palte With Clamp Nut Bolt , Danger Board With Clamp Nut Bolt , 33 Kv Disc Insulaotor , 33 Kv Disc Fiting , 33 Kv Pin Insultor , 33 Kv Pin With Nut & Bolt , Aluminium Paint , Red Oxide Paint , Nut & Bolt All Size , Earth Wire Clamp With Nut & Bolt , All Winding Wire 6Swg , Pg Clamp , Hdpe Pipe 120Mm , 33 Kv 3*120Sqmm Xlpe Cable Box Outdoor , Erection Of Following Material Including The Work Of Complete H.T. Fittings As Per Respo Manual And As Per Direction Of Engineer Incharge Including The Cost Of Labour, T & P And Carrier Etc. Required For Proper Completion Of Work. (With Proper Earthing.) , Erection Of Plain Cement Concrete Pole 9/11 Mtr Long Including The Work Of Complete H.T. Fittings As Per Respo Manual And As Per Direction Of Engineer Incharge Including The Cost Of Labour, T & P And Carrier Etc. Required For Proper Completion Of Work. , Grouting Of Plain Cement Concrete Pole 9/11 Mtr Long As Per Respo Norms ( Cement, Sand , Blast Stone With The Ration 1:4:8 Will Be Provided By Contractor ) , Erection Of S.T.P Pole 11/13 Mtr Long Including The Work Of Complete H.T. Fittings As Per Respo Manual And As Per Direction Of Engineer Incharge Including The Cost Of Labour, T & P And Carrier Etc. Required For Proper Completion Of Work. , Grouting Of Stp Pole 11/13 Mtr Long As Per Respo Norms ( Cement, Sand , Blast Stone With The Ration 1:4:8 Will Be Provided By Contractor ) , Fixing Of Stay Rod And Its Erection. Stay Wire Should Be Properly Binded And Tightened As Per Standard Specification. , Grouting Of Stay Set As Per Respo Manual And Also Including The Cost Of All Grouting Material, Labour, T & P Etc. Required For Proper Completion Of Work. , Laying, Sagging, Stringing, Binding And Jumpering Etc. Of Acsr Dog Conductor On The Newly Erected Pole/ Old Pole As Per Respo Manual And As Per Direction Of Supervising Engineer. It Includes The Cost Of Labour, T & P, Carries Etc. Required For Proper Completion Of Work. , Laying, Digging, Sagging, Stringing, Binding And Jumpering Etc. Of 33 Kv 3*300 Xlpe Cable On The Air/Underground And Road Crossing As Per Respo Manual And As Per Direction Of Supervising Engineer. It Includes The Cost Of Labour, T & P, Carries Etc. Required For Proper Completion Of Work. , Ms Angle Iron 65*65*6*4300Mm Bracing With Clamp , Top Channel 33 Kv , Earthing Complete , Guarding Angle , Guarding Angle Clamp , Gi Wire 6 Swg , Gi Wire 8 Swg , 33 Kv Cross Arm Holding Clamp , F Clamp 33 Kv For Stp , 33 Kv V Type Cross Arm , Dismantling Of Existing 33 Kv Line And Removal Of All Accessories & Fittings From Poles, Re-Rolling Of Conductor And Proper Stacking And Cartage Of Dismantled Conductor & Accessories From Site Of Work To Dvvnl, Store.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
2.
Coal and Mines #11348910 AOC
Outsourcing For Chipping And Construction Of Various Masonary Works In Underground Such As Ventilation Walls, Air Crossings, Cross Overs And Dams Etc., At Kasipet -2 Incline Of Mandamarri Area.
Contract Date: Ref. Documents Contract Value : ₹ 51.02 Lakh
Government Departments No of Bidders 1
Telangana View Result →
3.
Water Resources and Irrigation #11342284 AOC
Tender For Jal Jeevan Mission (Jjm)-Clear Water Pumping Main To Trippakadu 8Ll,Valiyavila 6.1Ll,Paramugal 6Ll-Clear Water Pumping Main To Trippakadu( 300Mm Di And 250Mm Di)-Pipeline Work - Supplying,Laying,Testing and Commissioning of Clear Water Pumping Main /Gravity Main- Woking Charges 2 100.59.1:Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 200mm along the sides of proposed alignment of the pipe to be laid without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffic diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means and carrying out the excavation. 3 15.59:Dismantling of flexible pavement ( bituminous courses ) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per direction of Engineer-in-charge. 4 100.1.1:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. 5 100.1.2:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth exceeding 1.5m but not exceeding 3m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in all kinds of soil. 6 2.20.2:Open timbering in trenches including strutting and shoring complete ( measurements to be taken of the face area timbered ):Depth exceeding 1.5 m but not exceeding 3 m 7 100.1.5:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50 m, in Ordinary Rock. 8 100.1.13:Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20cm in depth, including consolidating each deposited layer by ramming, watering, etc., and disposing of surplus excavated soil as directed, within a lead of 50m, in Hard Rock where Blasting is Prohibited. 9 100.8.1:Fencing one side of trenches, 1.50m height with two rows of 10cm plastic caution tape in vertical casuarina pole (girth 15cm to 24cm) fixed at 2m intervals. 10 100.14.5:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 300mm diameter Ductile Iron Class K-9 Pipes. 11 100.14.4:Conveying and laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes conforming to IS: 8329 excluding cost of pipes and specials: 250mm diameter Ductile Iron Class K-9 Pipes. 12 18.83.6:Labour for cutting C.I. pipe with steel saw.250 mm diameter C.I. pipe 13 18.83.7:Labour for cutting C.I. pipe with steel saw.300 mm diameter C.I. pipe 14 18.70.4:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:250 mm dia pipes 15 18.70.5:Providing push - on-joints to Centrifugally (Spun) Cast Iron Pipes or Ductile Iron Pipes including testing of joints and including the cost of rubber gasket:300 mm dia pipe 16 100.35.5:Testing 300mm DI/CI pipeline with potable water to the required test pressure. 300 mm dia Observed Data derived from item no.1023 of PHED DATA 17 100.35.4:Testing 250mm DI/CI pipeline with potable water to the required test pressure . 250 mm dia Observed Data derived from item no.1022 of PHED DATA 18 100.31.1.6:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 250mm diameter, Class I. 19 100.31.1.7:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 300mm diameter, Class I. 20 100.32.4:Conveying and fixing C. I. Double Acting Air Valve of approved quality with bolts, nuts, rubber insertions etc., complete, but excluding the cost of air valve (tail pieces, if required, will be paid separately): 80mm Double Acting Air Valve. 21 Construction of Valve Chamber,Anchor Blocks,Stream Crossing and Miscellaneous works 22 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil 23 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 24 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 25 5.9.2:Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. 26 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete 27 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more 28 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 29 Cost of Pipes and Specials 30 100.98.487:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Hand Wheel PN 1.6, Size 300mm. 31 100.98.462:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 250mm. 32 100.98.436:Supply of CI Air Valve, Conforming to IS 14848 - 2000, Kinetic Air Valve Type DK, Size 80mm. 33 100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I. 34 100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm. 35 18.68.1:Providing and laying D.I specials of class K - 12 suitable for push - on jointing as per IS : 9523 :Upt 600 mm dia 36 18.69.1:Providing and laying D.I Specials of Class K - 12 suitable for mechanical jointing as per IS : 9523 :Upto 600 mm dia 37 OD80665/2024-2025:Supplying and fixing C.I with cover and frame for manholes:
560 mm diameter ( heavy duty) the weight to be not less than 208 kg 38 100.98.118:Supply of DI K9 Pipe Conforming to IS 8329/2000, 250mm Dia. 39 100.98.119:Supply of DI K9 Pipe Conforming to IS 8329/2000, 300mm Dia. 40 Restoration work 41 3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m 42 4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method 43 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 44 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. 45 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 46 5.3.2.a:Providing and laying bituminous macadam with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with a bituminous binder (VG 30), transported to the site, laid over a previously prepared surface with paver finisher to the required grade, level, and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction For Grading II - (19 mm nominal size) 47 5.6.2.a:Providing and laying bituminous concrete with 80-100 TPH hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with a bituminous binder( NRMB) @ 5.4 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level, and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects For Grading - II (13.2 mm Nominal Size) 48 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. 49 12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical SpecificationsRCC Grade M20 - Using Concrete Mixer - (Without formwork) 50 8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.
Contract Date: Jun 23, 2026 Contract Value : ₹ 3.22 Crore
Local Bodies No of Bidders 2
Kerala View Result →
4.
Public Administrative Department #11333610 Technical Bid
Tender for Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) / Manual Means In Foundation Trenches Or Drains (Not Exceeding 1:5 M In Width Or 10 Sqm Or Plan) Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soils. .(Dsr No. 2.8) , All Kinds Of Soil. Dsr No. 2.8.1) , Providing And Laying S&S Centrifugally Cast (Spun) / Ductile Iron Pipes Conforming To Is : 8329 : (Dsr No. 18.72) , 100 Mm Dia Ductile Iron Class K-7 Pipes (Dsr No. 18.72.1) , 150 Mm Dia Ductile Iron Class K-7 Pipes (Dsr No. 18.72.2) , Providing Push-On-Joints To Centrifugally (Spun) Cast Iron Pipes Or Ductile Iron Pipes Including Testing Of Joints And The Cost Of Rubber Gasket : (Dsr No. 18.70) , 100 Mm Dia Pipes (Dsr No. 18.70.1) , 150 Mm Dia Pipes (Dsr No. 18.70.2) , Labour For Cutting C.I. Pipe With Steel Saw (Dsr No. 18.83) , 100 Mm Diameter C.I. Pipe (Dsr No. 18.83.1) , 150 Mm Diameter C.I. Pipe (Dsr No. 18.83.2) , Providing And Fixing Of Ci/Di Specials Isi Marked Including Cost Of Nut Bolt, Rubber Gasket, Pig Lead, Hemp Yarn, Solvent Solution Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Of Di Sluice Valve (With Resilient Seated) Including Cost Of Bolts, Nuts, Rubber Insertions Etc., Loading And Unloading Complete In All Respects To The Entire Satisfaction Of Eic. Make: Avk/ Ivc/ Kirloskar/ Sigmaflow/ Talis (Nsi) , 100 Mm Diameter (Nsi) , 150 Mm Diameter (Nsi) , Construction Of Brick Masonary Chamber For Sluice Valve Including Excavation, 1St Class Brick Work In Cement Sand Mortar 1:4 Alongwith Inside And Top Surface Plaster, Plain Cement Concrete For Floor Etc. Complete In All Respects Of Size: 3X3x4 To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Reinforced Cement Concrete Cover 1:2:4 Of 3 Thickness Including Cost Of Steel Winding Wire Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth, Sides Of Foundations Etc. In Layer Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 And For All Lift. (Dsr No. 2.25) , Carriage Of Material By Mechanical Transport Including Loading, Unloading And Stacking Earth Up To 3 Km (Dsr No. 1.1.2) , Supplying And Filling Sand (Recycled Sand From C&D Plant) Under Road Crossing Including Carriage Etc., Complete In All Respects To The Entire Satisfaction Of The Eic. (Nsi Based Dsr No. 2.27) , Labour For Disconnection Of Gi Pipe & Gi Specials Including Cost Of Excavation, Extra For Concrete Cut, Cutting Of Gi Pipe, Plugging Of Gi 1 Pipe With Gi Plug, Gi Socket, Labour, Plumber Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Making Connection Of Newly Laid Cpvc Pipe With Existing Gi Pipe Including Cost Of Threading Gi Pipe Including Cost Of Threading Of Existing Pipe With The Help Of Labour And Plumber Etc. Complete In All Respects To The Entire Satisfaction Of Eic.(Nsi) , Providing And Fixing Of Polyethelene - Aluminium -Polyethelene Pe-Al Pe 2025X ½ Female Thread Adopter (Fta) Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Of Gm Ferrule (½ I/D) Heavy Duty Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Polyethelene-Aluminium- Polyethelene Pe-Al-Pe Composite Pressure Pipes Conforming To Is - 15450, U.V. Stabilized With Carbon Black Having Thermal Stability For Hot & Cold Water Supply, Capable To Withstand Temperature Up To 80°C, Including All Special Fittings Of Composite Material (Engineering Plastic Blend And Brass Inserts Wherever Required) E.G. Elbows, Tees, Reducers, Couplers & Connectors Etc., With Trenching, Refilling And Testing Of Joints Complete As Per Direction Of The Engineer In Charge. (Dsr No. 18.3) , External Work: 1620 (20 Mm Od ) Pipe (Dsr No. 18.3.2) , Extra Cutting Through Metalled Road And Their Foundation Including Sorting Screening And Stacking At The Site Complete In All Respects. (Nsi) , Labour For Making Arrangement For Connection With Existing Line Including Cost Of Cutting, Excavation, Jointing, Alignment, Dewatering, Placing Caution Boards Etc, Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , 6 I/D To 4 I/D (Nsi) , 6 I/D To Proposed 6 I/D (Nsi) , Making Scour Arrangement Including Cost Of C.I. Tee 4X 4X 4(A/F)-Ino, C.I. Collar 4 I/D -1No., D.I Sluice Valve =1No. (Vag/Avk/Ivc), C.I. Tail Piece 4 I/D (S/F-Ino. Pig Lead, Hemp Yarn, Rubber Sheet, Nut Bolt, Excavation, Dewatering Cutting Of Existing Pipe, Jointing, Testing Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Providing And Fixing Of 4 I/D (100 Mm) Air Valve 100Mm D.I. Air Valve With Body And Disc Of Ductile Iron And Plug Made Out Of Brass Including Cost Of 1 No.= 4 D.I Sluice Valve 4, With 2 Nos. = 4 D.I Tail Piece, 4 × 4 × 4 = Tee, & 2M Pipe Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Repair Of Damaged Sewer Connection Including Cost Of Cutting, Jointing And Haunching Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi) , Repair And Rectification Of Underground Water Supply Connection Due To Damage During The Laying Of New Di Water Supply Pipeline Including Cost Of Pig Lead, Hemp Yarn, Rubber Sheet, Nut Bolt, Specials Pipe Of Same Size Etc. Complete In All Respects To The Entire Satisfaction Of Eic. (Nsi)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 2
Chandigarh View Result →
5.
Coal and Mines #11333148 Technical Bid
Tender for Construction Of Air Crossing /Foot Bridge At - 3E/L12 Junction In M.S. Seam Haulage Line Of Lakhimata Colliery.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 3
Jharkhand View Result →
Rajasthan View Result →
Rajasthan View Result →
8.
Housing Urban and Rular Development #11319892 AOC
Quotation for NON CSR Electrical Item for the work supply installation testing and commissioning of Electrification at the Mahalaxmi Temple, Kolhapur,Dist.Kolhapur- 1 Making cement concrete foundation including excavation (60 x 60 x 150) cm deep in 1:3:6 cement concrete 20 x 25 mm stone metal, (45 x 45 x 45) cm /45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (4 m poles) 2 Making cement concrete foundation in 1:2:4 cement concrete with foundation bolts and nuts complete. (cost of wooden box is included) (for DG Set). 3 SITC of ESE type Lightning Arrestor Air Terminal as per standard NFC 17-102, Level IV with protection radius 51 mtr @ mounting height 5 meter.LA should be have CPRI test cerficate and should have test cerficate as per NFC 17-102 of suitable europian authority. 4 SITC of 3 meter height Mounting structure MAST (FRP/G.I.), along with supporting guy rope, base plate, mounting structure, required nut bolts etc. 5 SITC of Strike Recorder with weather proof Enclousure. It should be standalone type with no external power source requirement. 6 SITC of Test Link 7 SITC of Pipe in Pipe type GI maintanance free earthing - 80/38 (3.0 Mtr.s) with all other loose acessories and earthing pit chamber and cover. 8 SITC of single core 35 Sq. MM. Insulated Alm. Armoured Cable along with all installation accessories like clamp etc. (Optional) from LA to Earth Pit. Manufacturer to specify Copper/Aluminium). 9 Supplying, fixing and commissioning of MLTP including: Incoming - 200A MCCB 25 KA-2 nos, 200A ATS 4P - 1 Nos, Bus 250A Aluminium Outgoing : 63A 4P MCB - 5 Nos, 40A 4P MCB- 10 Nos, 125A 4P MCCB - 1 Nos, 160A SP MCCB - 1 Nos with floor mount stand 10 Supplying, fixing and commissioning of LTFP with 200 AMPS MCCB Incomer 8 Nos. Outgoing with 40 AMPS FPMCB 11 Providing & erecting 4 Pole MCCB, 415 V, 125A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 12 Providing & erecting 4 Pole MCCB, 415 V, 160A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 13 Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 200 mm width & 50 mm height complete with necessary coupler plates & hardware. 14 Providing & erecting hot dipped galvanised Raceway with cover manufactured from 16 SWG (1.6 mm thick) GI sheet of 100 mm width & 50 mm height complete with necessary coupler plates & hardware. 15 Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 200 mm x 200 mm complete with necessary cover plates & hardware. 16 Providing & erecting hot dipped galvanised junction box manufactured from 18 SWG (1.2 mm thick) GI sheet of 300 mm x 300 mm complete with necessary cover plates & hardware. 17 Supply and Installation of 5MP PoE IP Bullet Camera with automatic varifocal lens from 3.3 to 10 mm lens and 30 meter inbuilt IR, Dual Streams with configurable bit rate, GOP and frame rate, Edge based Video Analytics- object classification (Human/Vehicle), object in field, line crossing, enter field, leave field, loitering, follow route, objects stopping or starting to move, counting, occupancy, condition change, similarity search, 16 number of analytics/rules can be configured simulaneously. The video analytics software can detect up to 64 objects per frame in real time. support memory card up to 2TB capacity with health monitoring for early service indication. The recording in local storage should also be AES encrypted, support ONVIF S,G,T,M with MQTT event forwarding, onboard data security by using TPM (Trusted Platform Module) and PKI, supports TLS 1.3, Secure boot, Signed Firmware, software sealing to notify of device configuration changes, Embedded Login Firewall to minimize DDOS Attack, X.509 v3 digital certificates with SHA516 signature hash, audit logs, Unsecure ports like HTTP and RTSP are disabled by default, uses RTSPS/SRTP for video streaming, UL 2900-2-3 Level 2 cybersecurity certified, Camera should have UL, EN, CE, FCC, NDAA, with IP 66 and IK10 impact protection 18 Supply and Installation of 5MP Outdoor Dome camera with 1/2.9‑inch CMOS, Effective pixels 3072 (H) x 1944 (V), 30fps, Sensitivity – (3100K, reflectivity 89%, 1/25, F1.3, 30IRE)Color 0.24 lx Mono 0.03 lx With IR 0.0 lx, 120 dB Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, Privacy Mask,Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Audio detection (if microphone used), 3 to 10 mm Automatic Varifocal (AVF) lens, MicroSD card slot for edge recording, Motion, tamper and audio detection(if microphone used), FTP, IR range upto 30mtrs Dropbox and e-mail applications, 3 axis adjustment, ONVIF Profile S & G & T, PoE, IP66 and NEMA 4X, IK10, CE, FCC , UL certified. SD card support up to 2TB. 19 Supply and Installation of 5MP Indoor Dome camera with 1/2.9‑inch CMOS, Effective pixels 3072 (H) x 1944 (V), 30fps, Sensitivity – (3100K, reflectivity 89%, 1/25, F1.3, 30IRE) Color 0.24 lx Mono 0.03 lx With IR 0.0 lx, 120 dB Dynamic range, Electronic Day/Night, Automatic Electronic Shutter (AES), H.265, H.264 MP (Main Profile); M-JPEG Video compression, White balance, Backlight Compensation, Privacy Mask,Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Audio detection (if microphone used), 3 to 10 mm Automatic Varifocal (AVF) lens, MicroSD card slot for edge recording, Motion, tamper and audio detection(if microphone used), FTP, IR range upto 30mtrs Dropbox and e-mail applications, 3 axis adjustment, ONVIF Profile S & G & T, PoE, CE, FCC , UL certified. SD card support up to 2TB. 20 Supply and Installation of 12MP IR Panoramic camera with 1/2.3‑inch CMOS, 360° lens, Effective Pixels 3008 x 3008 (9 MP), 1 to 25 [30] fps, Sensitivity @30IRE: 0.15lux(color), 0.048lux(mono); 0 lux with IR; 20m IR; 120 dB WDR, Video compression H.264 (MP)/ H.265 (MP); M- JPEG, Electronic Day/Night, White Balance, Automatic Electronic Shutter, Backlight compensation, Intelligent Dynamic Noise Reduction (iDNR), Privacy Masking, Rule based alarms and tracking, Line crossing, Enter /leave field, Follow route, Loitering, Idle / removed object, People counting, Crowd density estimation, 3D tracking based on Duration, Size, Aspect ratio v/h, Speed, Direction, Color, Object classes (Upright persons, Bikes, Cars, Trucks), Camera Trainer (machine learning to train user specified objects), Built-in microphone(Integrated array with 3 digital MEMS audio sensors), Signal-to-Noise Ratio, Full-duplex / half duplex Audio Streaming, Memory card slot, 10/100 Base-T, ONVIF Profile S,G, M & T, clientside/cameraedge dewarping,IP66, NEMA 4X, IK10, PoE, CE,UL, FCC. 21 Supply and Installation of all-in-one recording, viewing and management solution for network surveillance systems for up to 256 channels, Pre-installed, pre-configured IP storage solution, with RAID-5/RAID-6 protected, Dedicated storage operating system delivers robust , secure operation, Hot-swappable hard drives, Advanced user and alarm management,Intel® Core™ i7-12700E (25 MB Intel® Smart Cache 2.10 GHz) Processor,16 GB DDR5,ECC UDIMM memory installed, 2U rack mount, 12 Trays: 3.5- inch SATA 3; max 18TB per HDD slot maximum supported, 12Gb/s SAS RAID Card, 4 USB ports; Intel onboard graphics (Intel® UHD Graphics 770),Microsoft Windows Server IoT 2022 for storage standard,UL, CE Certified. 2 x RJ45 Gigabit Ethernet LAN ports (teamed); 1 IPMI BMC port. Operating temperature (°C) 0°-40°C; Operating relative humidity, noncondensing (%) 8 - 90%. Video Managment software In-built (Server-client architecture) with Live viewing of multiple cameras, Local recording and snapshots, PTZ control and digital zoom, Playback and export from storage, Motion and forensic search, Multi-screen grid selection , Sequencing selection, favorite view design.Dual authorization login,e Map support,ONVIF profile S,T complied,User management,Alarm management,SQL based database,LDAP support.Support of camera edge based analytics/server based analytics alarm triggering. Certifications UL,CB,CE,FCC,NDAA,BIS 22 Supplying & erecting 55 professional LED display with 1920 *1080 ( Full HD) Display, suitable for 32/64 channel NVR and following features Brightness: minimum 500 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC,USB, Audio In,Built-in speakers maximum 10 W, Suitable to operate on 100-240 V 50 Hz AC supply and 24/7 Duty Cycle duly erected on wall or table top with standard accessories like wall mount stand and wiring connections etc. complete as per specifications no. CCTV-MON 23 Supply and Installation of Client Workstation with 21 Inch Monitor 24 RE-2AS Supply of EN 54-16 certified and EN 60849 standards, public address and voice alarm system that ensures a fast, safe and controlled emergency evacuation. It should have 2 class D 500W amplifiers, one shall be for the feild output with two configurations for 100V/70V lines and another one is as standby backup, 6 zones, 3 audio inputs, 6x6 audio matrix,Digital Signal Processing Based Voice Alarm Controller and LCD display 2 rows x 16 characters with 3 inputs. It should have the provition for battery installation with proper rigit & safe mounting option. It shall be suitable for both Wall or Rack mounting provision and have following features:- 1. Support Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable 2. Digital Amplifier (inbuilt) 2X500 watts and 6 zones,Backup amplifier included . 3. 4 pre-amp outputs for external PAamplifiers connection. 4. 10 minutes storage for pre-recorded messag. 5. USB connectivity. 6. Password protection, 7. Overriding Facility for Emergency Condition. 8. Have In-Built or attached MIC. 9. Work on 100 - 240V~ 50/60Hz and standby battery 1x 12VDC. 10.FireAlarm Control Panel integration. 11. Interface MODBUS RTU RS 485 Half duplex Supply of EN 54-16 certified and EN 60849 standards, public address and voice alarm system that ensures a fast, safe and controlled emergency evacuation. It should have 2 class D 500W amplifiers, one shall be for the feild output with two configurations for 100V/70V lines and another one is as standby backup, 6 zones, 3 audio inputs, 6x6 audio matrix,Digital Signal Processing Based Voice Alarm Controller and LCD display 2 rows x 16 characters with 3 inputs. It should have the provition for battery installation with proper rigit & safe mounting option. It shall be suitable for both Wall or Rack mounting provision and have following features:- 1. Support Up to 8 MPS-8Z multizone micropohones or VAP-1 panels connected with CAT5 UTP cable 2. Digital Amplifier (inbuilt) 2X500 watts and 6 zones,Backup amplifier included . 3. 4 pre-amp outputs for external PAamplifiers connection. 4. 10 minutes storage for pre-recorded messag. 5. USB connectivity. 6. Password protection, 7. Overriding Facility for Emergency Condition. 8. Have In-Built or attached MIC. 9. Work on 100 - 240V~ 50/60Hz and standby battery 1x 12VDC. 10.FireAlarm Control Panel integration. 11. Interface MODBUS RTU RS 485 Half duplex 25 RE-2AS BC Supply of the Battery update and activation card EN54-4 certified for RE-2AS. Once activated, the card becomes a key for the charger to work permanently.Package dimensions (W x H x D) : 190 x 20 x 140 mm . Supply of the Battery update and activation card EN54-4 certified for RE-2AS. Once activated, the card becomes a key for the charger to work permanently.Package dimensions (W x Hx D) : 190 x 20 x 140 mm 26 RE-2AS PTT Supply RE-2AS PTT dynamic microphone adds more versatility to your RE-2AS unit. This new device allows you to have a public announcement input right there at your fingertips. This Push To Talk microphone can be directly connected to the priority audio input to bypass the background music. As it is directly powered from the USB port inside the unit, you do not need to add an external power supply. Supply RE-2AS PTT dynamic microphone adds more versatility to your RE-2AS unit. This new device allows you to have a public announcement input right there at your fingertips. This Push To Talk microphone can be directly connected to the priority audio input to bypass the background music. As it is directly powered from the USB port inside the unit, you do not need to add an external power supply. 27 RE-2AS MPE Expansion unit model RE-2AS MPE for the paging microphone RE-2AS MP8Z. It has 8 software programmable buttons for paging up to 8 public address zones. It has an iron chassis to provide stability and protection against damages. All buttons are designed for an intensive use. Expansion unit model RE-2AS MPE for the paging microphone RE-2AS MP8Z. It has 8 software programmable buttons for paging up to 8 public address zones. It has an iron chassis to provide stability and protection against damages. All buttons are designed for an intensive use. 28 RE-2AS WMK Supply of the Wall mounting kit allows to install a PAVA unit on wall. It should be made of 1.5 mm galvanized sheet Supply of the Wall mounting kit allows to install a PAVA unit on wall. It should be made of 1.5 mm galvanized sheet 29 RE-2AS 4L Supply, installation, Testing, & commissioning of Network module to connect multiple PAVA systems., cable length Up to 200m per node and up to 4 units and 24 zones, 4 PAVA systems shall be network with length of max 800m,dimmensions (H x W x D)120 x 100 x 80 mm. Supply, installation, Testing, & commissioning of Network module to connect multiple PAVA systems., cable length Up to 200m per node and up to 4 units and 24 zones, 4 PAVA systems shall be network with length of max 800m,dimmensions (H x W x D)120 x 100 x 80 mm. 30 Supply, fabrication & Installation of thermal insulation on GI ducts complete with Closed Cell foam anti microbial insulation (Nitrile Rubber) with minimum density of 40 Kg/m3 with minimum R Value 4.1/inch & thermal conductivity -0.035 w/mok confirming to Class O & the inner side stuck to the outer facia of the GI ducts with recommended / Proprietory adhesive bonding inline with LEED requirements & installed as per manufacturers recommendation. The insulation joints shall be sealed with 3 wide Black Tape. Thermal Insulation - 9mm thick 31 Supply, fabrication and installation of acoustic lining of supply and return air ducts as specified and shown on the drawing complete with 10 mm thick acoustic insulation with Open Cell Foam Insulation - ArmasoundMicroban antimicrobial product protection withThermal conductivity 0.045 W/m deg.K / density 140~180 kg/m3, with manufacturer recommended adhesive inline with LEED requirement.Acoustic Insulation - 13mm thick 32 Electrical panel with outgoing for 2nos. Of VRV ODU and IDU 33 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 24W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Bodymade of Die cast Aluminium.Effective delivered lumens 2000-2200,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 34 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 36W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 9300 Candella . Bodymade of Die cast Aluminium.Effective delivered lumens 3000-3200, ,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 35 Supplying, fixing and commissioning of Ground recessed Uplight for column, IP 67 RatedBody to be of High Grade Die Cast Aluminium with SS trim. Fixture to have 10w Led with Cool Touch Feature, Narrow 10 deg beam ,Color tempreture to be 3000k ,800-850 lumens, 90 Cri 3 Step Mac Adam with Remore Dali Driver, glare rating UGR<16. Lifespan ≥ 50000 hrs, Ambient temperature 25°-40° C, L&B Ratio L70/B20 with Lumen Maintenance LM80, Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 36 Supplying, fixing and commissioning of Surface Mounted Spotlight IP 65 with RAL finish LED 15W, 3000K CCT,Body Made of Die Cast Aluminium30 deg Medium beam . Effective delivered lumens 1350-1400, MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 37 Supplying, fixing and commissioning of Under Water Step Light IP 68 with RALfinish LED 5-8W, 3000K CCT, Medium beam.Effective delivered lumens 400- 600,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. 38 Supplying, fixing and commissioning of Surface Mounted downlight IP 65 with RAL finish LED 20W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Effective delivered lumens 2000-2200,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. 39 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 24W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 6180 candella . Bodymade of Die cast Aluminium.Effective delivered lumens 2000-2200,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 40 Supplying, fixing and commissioning of Customized Deep mala Light IP65 with RAL finish LED 2-3W, 2400-2700K CCT, Diffused Beam° , MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 80 including DALI driver.. Standard Warranty 5 Years. 41 Supplying, fixing and commissioning of Adjustable Surface Mounted Spotlight IP 65 with RAL finish LED 15W, 3000K CCT, Medium 30 deg beam Having Minimum CBCP value of 3000 candella . Bodymade of Die castAluminium. Effective delivered lumens 1200-1400,MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 42 Supplying, fixing and commissioning of Ground recessed Uplight for column, IP 67 RatedBody to be of High Grade Die Cast Aluminium with SS trim. Fixture to have 10w Led with Cool Touch Feature, Narrow 10 deg beam ,Color tempreture to be 3000k ,800-850 lumens, 90 Cri 3 Step Mac Adam with Remore Dali Driver, glare rating UGR<16. Lifespan ≥ 50000 hrs, Ambient temperature 25°-40° C, L&B Ratio L70/B20 with Lumen Maintenance LM80, Standard Warranty 5 Years. Additional mounting accessories : Honeycomb louvre 43 Supplying, fixing and commissioning of Surface Mounted Adjustable Spotlight , Auminium Die Cast Body, IP 65 Ratedwith RAL finish LED 15W, 3000K CCT, Medium beam . Effective delivered lumens 1200-1300, MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Standard Warranty 5 Years. 44 Supplying, fixing and commissioning of Adjustable Mini Surface Mounted Spotlight IP65 Body to be made of Die Cast Aluminium with RAL finish LED 3W, 3000K CCT, Narrow 15 degbeam . Effective delivered lumens 40-50 , MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Additional mounting accessories : Honeycomb louvre. Standard Warranty 5 Years. 45 Supplying, fixing and commissioning of Adjustable Mini Surface Mounted Spotlight IP65 Body to be made of Die Cast Aluminium with RAL finish LED 5W, 3000K CCT, Narrow 15 degbeam . Effective delivered lumens 150-200 , MacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, , L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90 including DALI driver. Additional mounting accessories : Honeycomb louvre. Standard Warranty 5 Years. 46 Supplying, fixing and commissioning of Recessed Linear Grazer Die Cast Aluminium Body with SS Trim,LEDwattage to be 10-14W/m RGBW CCT Grazer 10x24 deg Optic,Remote Dali Dimmable, Delivered lumens: 500-600Real lm/m,glare rating UGR<19L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90.. Standard Warranty 5 Years. 47 Supplying, fixing and commissioning of Surface MountedLinear Grazer IP 67 ratedDie Cast Aluminium Body with adjustable Brackets, LED wattage to be 15W/m 3000K CCT Garzer 10x24 deg Optic,Remote Dali Dimmable, Delivered lumens:Real 1200lm/m,glare rating UGR<19L&B Ratio L70/B10 with Lumen Maintenance LM80, CRI 90.. Standard Warranty 5 Years. 48 Supply, Installation, Testing and Commissioning ofAdjustable Gobo Projector Light , Body to be Made of Die cast Aluminium, Wattage of 180w Beam, 5200 lumens, 4 Gobo Modules , IK 08 CCT 7000k , Degree 15-45 deg Motorized Zoom, IP 66 rated. CRI >70. Driver Inbuilt DMX RDM Controlled. Life time of Led L70B20 @ 35000 hrs. Gobo design to be decide by Architect/Lighting Designer. 49 Supplying, fixing and commissioning of Post Top LuminaireIP65 & IK10 with RAL finish, LED 40W, 2200K CCT, Symmetrical beam optics. Effective delivered lumens 2000-2200 lumensMacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, Ambient temperature < 40° C, L&B Ratio L80/B20 with Lumen Maintenance LM80, CRI 80+. Standard Warranty 5 Years 50 Supply, Installation, Testing and Commissioning ofPole Mounted Adjustable Gobo Projector Light having Wattage of 40W and Delivered Lumens of 2500. Beam Degree 17-30., IP 65 rated with Pole mounting Bracket. CRI >70. Driver to be non dimmable and Integrated. Life time of Led L70B20 @ 35000 hrs. Gobo design to be decide by Architect/Lighting Designer.Including 4mtr. pole (procurred locally) 51 Supply, fabrication, and installation of a custom-made heritage chandelier of diameter 2000 mm and height 2000 mm, made from heavy-duty metal frame with antique brass / bronze / gold leaf finish as approved by the architect. The chandelier shall include precision-cut K9 / lead crystal elements in pendants, prisms, and beads, arranged in multi-layer form to create a grand decorative effect. Fixture shall be suitable for E14 / E27 LED lamps or integrated LED modules, providing warm white light (2700K–3000K) with CRI ≥ 90 and dimmable control.Suspension shall be with heavy-duty chain/rod system and canopy plate designed to safely carry the total load with 3× safety factor. All wiring shall be flame-retardant copper with proper earthing. The chandelier shall comply with IEC / IS standards and be supplied with shop drawings, finish samples, and load details for approval. Minimum warranty: 5 years. 52 Supply, Installation, Testing and Commissioning of Decorative Wall Light. Housing: IP65 & IK10 with RAL finish, LED 40W, 2200K CCT, Symmetrical beam optics. Effective delivered lumens 2000-2200 lumensMacAdam Step 3, glare rating UGR<19, Lifespan ≥ 50000 hrs, Ambient temperature < 40° C, L&B Ratio L80/B20 with Lumen Maintenance LM80, CRI 80+. Standard Warranty 5 Years 53 Supply, Installation, Testing & Commissioning of International seeTouch QS Wallstation Insert 5 Button with Raise/Lower QSWE-5BRL 54 Supply, Installation, Testing & Commissioning of DALI Dimming controller; Controls 2 independent DALI links with up to 64 DALI ballasts per link. Can take care of Color Tunable fixtures. 4 groups of sensors inputs: Occ sensor, daylight sensor and IR sensor. Requires mains/line voltage feed Similar to Lutron QSN-2UNVDAL- D 55 Supply, Installation, Testing & Commissioning of Switching module with 4channels, each channel with minium 5 amp rating with provisions of sensors inputs: Occ sensor, daylight sensor and IR sensor. Requires mains/line voltage feed Similar to Lutron QSNE-4S 5230D module 56 The QSE-CI-DMX control interface allows zones on a to control DMX512-controlled devices Any zone can be mapped to either a single DMX512 channel or to three separate DMX512 channels, for RGB/CMY color-control The DMX channels (maximum of 32) are mapped to zones, and can be programmed as 1- channel lighting, 1-channel integration, or 3-channel RGB/CMY 57 Supply, Installation, Testing & Commissioning of central processor assembled processor with one/two configurable links and inbuilt BACnet for occupancy status. Each processor link can be configured to be a dimmer link, shade link, or dimmer power panel link. Processor accpets 220-240V, 1 phase, 2 wire, 10A feed, (throiugh power supply) Similar to Lutron Athena 58 Supply, Installation, Testing & Commissioning of Power Supply Unit for supply PDUs to Antenna devices Similar to Lutron QSPS-DH -1 -75Approved Makes :Lutron, Crestron, Pharos,Enlighten 59 Supply, Installation, Testing & Commissioning of Lighting control and monitor software, captures floor wise consumption, each event, Energy Reporting & monitoring per processor, 60 Supply, Installation, Testing & Commissioning of Lighting control BACnet softwares for BMS integration. This license for BACnet software enables a third-party building management system to control, monitor,and manage lights and shades in various areas on a processor. This license can also be used to share information between the control system and other control systems such as area occupancy, power usage, lighting state, etc. License required 1 per processor. 61 Supply of QS cable for power and data simialr to Lutron QS-CBL-LSZH Cable Adheres to CE standards for Low Smoke Generation (EN 60332-1-2), Halogen Gas Emission (EN 61034-2), and Flame Retardation (EN 60754- 1&2). • Five Conductors: Common – 0.75 mm2 (18 AWG) Power – 0.75 mm2 (18 AWG) MUX Data – 0.25 mm2 (22 AWG) _ Data – 0.25 mm2 (22 AWG) Drain Wire – 0.2 mm2 (24 AWG) Laying in suitable conduits to be done by Electrical contractor. 62 The scope of work includes the supply, installation, testing, and commissioning of asuitable Distribution Board (DB) box for mounting dimming and switching modules,complete with all necessary accessories such as enclosures, busbars, terminalblocks, MCBs, internal wiring, and supports, as per approved drawings andspecifications; the DB box shall be of robust construction, properly ventilated, factoryfinished, and designed to facilitate easy integration with the Lighting ManagementSystem, ensuring safe, reliable, and efficient operation after successful testing andcommissioning. 63 Programming of complete systemThe scope of work includes the complete programming, testing, and commissioningof the Lighting Management System (LMS), covering configuration of lighting zones,dimming levels, sensors, and schedules as per the approved control philosophy,integration with BMS/third-party systems if required, point-to-point and functionaltesting of all devices, fine-tuning and calibration, preparation of test reports and asbuilt documentation, and providing necessary training to client/end-user staff toensure the LMS is fully functional, compliant, and ready for handover. 64 Supplying, erecting, testing and commissioning of diesel generating set with alternator of 160 kVA confirming to CPCB IV Plus emmision compliant with output continuous rating. 3 Phase. 415 V, 50c/s 0.8 p. f. A.C supply, a totally enclosed (liquid cooled multi-in line cylinder diesel engine developing suitable BHP at 1500 rpm with 10% overload for 1 hour in 12 hours, along with standard accessories, self-excited, self regulated, screen protected alternator with static excitation system running at 1500 RPM as per IS 4722-2001 with voltage regulation +/-5%, with performance class G2. Both the engine and alternator direct coupled on a common fabricated steel base frame and mounted on anti-vibrating pads with standard control panel comprising meters, switchgears,indicators connected with suitable zires/cables, the complete set enclosed in composite Acoustic enclosure as fully assembled integral unit made of 16 SWG CRCA Sheet, sound absorbing material to restrict sound level up to 75 dB at 1.0 m. with suitable capacity DEF tank provided with first Filling of oil, diesel tank capacity not less than 385 Ltr etc. on provided M20 Grade CC Foundation and obtaning necessary aproval from electrical inspector if necessary. This DG Set is fiited in sound prof and whether proof Acoustic Enclosure asper CPCB IV plus emisison complaint as per specification no. GEN-DG
Contract Date: Jun 19, 2026 Contract Value : ₹ 1.28 Crore
Government Departments No of Bidders 3
Maharashtra View Result →
Uttar Pradesh View Result →
10.
Public Administrative Department #11300148 AOC
Tender For Construction Of Inspection Banglow, Guest House, Boundary Wall & Garage Near Suklai Head Works Under Extension, Renovation And Modernization Of (Erm), Sukla Irrigation Project Under Pmksy-Aibp For The Year 2021-22. , Construction Of Inspection Banglow, Guest House (Ground Floor). Earth Work : Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. , Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size De Rived From Natural Sources) , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Providing And Laying Damp-Proof Course 40Mm Thick With Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand (Zone-Iii) Derived From Natural Sources : 4 Graded Stone Aggregate 12.5Mm Nominal Size Derived From Natural Sources) , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete , Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Pre Construction Anti - Termite Treatment : Diluting And Injecting Chemical Emulsion For Post-Constructional Anti-Termite Treatment (Excluding The Cost Of Chemical Emulsion) : Treatment Of Soil Under Existing Floors Using Chemical Emulsion @ One Litre Per Hole, 300 Mm Apart Including Drilling 12 Mm Diameter Holes And Plugging With Cement Mortar 1 :2 (1 Cement : 2 Coarse Sand) To Match The Existing Floor: With Chlorpyriphos/Lindane E.C. 20% With 1% Concentration , Brick Work : Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In: Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing In Position Collapsible Steel Shutters With Vertical Channels 20X10x2 Mm And Braced With Flat Iron Diagonals 20X5 Mm Size, With Top And Bottom Rail Of T-Iron 40X40x6 Mm, With 40 Mm Dia Steel Pulleys, Complete With Bolts, Nuts, Locking Arrangement, Stoppers, Handles, Including Applying A Priming Coat Of Approved Steel Primer. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Plinth Protection : Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation Leveling And Dressing And Finishing The Top Smooth. , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow Cum Guest House (First Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Second Floor). Steel Work : Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More , Cement Concrete Work : Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Shuttering & Formwork : Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers , Columns, Pillars, Piers, Abutments, Posts And Struts , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Stairs, (Excluding Landings) Except Spiral-Staircases , Brick Work : Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. Cement Mortar 1:4 (1 Cement :4 Coarse Sand) , Wood Work : Providing Wood Work In Frames Of Doors, Windows, Clerestory Windows And Other Frames, Wrought Framed And Fixed In Position With Hold Fast Lugs Or With Dash Fasteners Of Required Dia & Length (Hold Fast Lugs Or Dash Fastener Shall Be Paid For Separately). Sal Wood , Providing And Fixing Panelled Or Panelled And Glazed Shutters For Doors, Windows And Clerestory Windows, Fixing With Butt Hinges Of Required Size With Necessary Screws, Excluding Panelling Which Will Be Paid For Separately, All Complete As Per Direction Of Engineer-In-Charge. (Note:- Butt Hinges And Necessary Screws Shall Be Paid Separately) Second Class Teak Wood 35 Mm Thick Shutters , Pvc Door Frame : Providing And Fixing Factory Made Pvc Door Frame Made Of Pvc Extruded Sections Of Size 75 Mm X 53 Mm, Having Wall Thickness 2.0 Mm (± 0.2 Mm). Both Verticalssides Of The Frame Reinforced With Pvc Profile Of Cross Section Size 28 Mm X 30 Mm X 2 Mm Thickness (± 0.2 Mm) And 75 Mm X 200 Mm Long, Including Reinforcing Both Ends Of The Top Frame With Pvc Profile. Pvc Door Frame And Pvc Reinforcement Profile To Be Mitred Cut, Jointed And Fusion Welded Together, Including Providing And Fixing 3 Nos Of 125 Mm Long Stainless Steel Hinges To Frame, Fixing The Frame With Jamb With Required Nos & Sizes Of Anchor Dash Fastener, All Complete As Per Manufacturers Specification And Direction Of Engineerin-Charge. , Providing And Fixing 37 Mm Thick Factory Made Pvc Door Shutter, Styles And Rails Made Of Pvc Hollow Section Of Size 100 Mm X 37 Mm With Wall Thickness 2 Mm (± 0.2 Mm), With Inbuilt Bead On One Side, Styles And Rails Mitered Cut And Joint At The Corners By Means Of 2 Nos Of Plastic Brackets Of Size 75 Mm X 220 Mm At Each Corner And Stainless Steel Screws, Reinforcing The Hinge Side Of Tyle By Inserting Pvc Profile Of Size 28 Mm X 30 Mm, With Wall Thickness 2 Mm ( ± 0.2 Mm). Lockrail Of Size 100 Mm X 37 Mm, Wall Thickness 2 Mm (+ 0.2 Mm) Will Be Fixed To The Vertical Styles. Providing With Pvc Snapfit Beads And Panel Of Size 100 Mm X 20 Mm, And Inserting 2 Nos Tie Bar Of 6 Mm Dia And Fastening With Nuts And Washers Complete, All As Per Manufacturers Specification And Direction Of Engineer-In-Charge. , Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) : For Fixed Portion Less Than 12.50 Kg/Sqm) Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) , For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) Powder Coated Aluminium (Minimum Thickness Of Powder Coating 50 Micron) , Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge . (Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Tiles Works : Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete. Size Of Tile 600X600 Mm , Providing And Laying Vitrified Tiles In Different Sizes (Thickness To Be Specified By Manufacturer), With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, In Skirting, Riser Of Steps, Over 12 Mm Thick Bed Of Cement Mortar 1:3 (1 Cement: 3 Coarse Sand), Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm , Providing And Fixing M.S. Grills Of Required Pattern In Frames Of Windows Etc. With M.S. Flats, Square Or Round Bars Etc. Including Priming Coat With Approved Steel Primer All Complete. Fixed To Steel Windows By Welding. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Plastering Works : 12 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) , 20 Mm Cement Plaster Of Mix : 1:4 (1 Cement: 4 Fine Sand) , Steel Work In Built Up Tubular (Round, Square Or Rectangular Hollow Tubes Etc.) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes , Roofing : Providing And Fixing Precoated Galvanised Iron Profile Sheets (Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge) 0.50 Mm (+ 0.05 %) Total Coated Thickness With Zinc Coating 120 B49grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineer In-Charge. The Sheet Shall Be Fixed Using Self Drilling /Self Tapping Screws Of Size (5.5X 55 Mm) With Epdm Seal, Complete Upto Any Pitch In Horizontal/ Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. , Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm (+0.05 %) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester To Coat 15-18 Microns Using Self Drilling/ Self Tapping Screws Complete : Using Self Drilling/ Self Tapping Screws Complete : Ridges Plain (500 - 600Mm) , Sound Proof : Providing And Fixing Thermal Insulation With Resin Bonded Fibre Glass Wool Conforming To Is: 8183 Having Density 24 Kg/M3, 50 Mm Thick, Wrapped In 200G Virgin Polythene Bags Fixed To Wall With Screw, Rawel Plug & Washers And Held In Position By Criss Crossing Gi Wire Etc. Complete As Per Directions Of Engineer-In-Charge. , 8 Mm Thick Fully Perforated Calcium Silicate Board Made With Calcareous & Siliceous Materials Reinforced With Cellulose Fiber Manufactured Through Autoclaving Processto Give Stable Crystalline Structure With Minimumcompressive Strength 225 Kg/ Sq. Cm, Bending Strength100 Kg/Sq. Cm , Of Size 595X595 Mm, Having Perforationof Dia. 10 Mm With Minimum Perforated Area 18 % Withnon Woven Tissue On The Back Side, Having An Nrc( Noise Reduction Coefficient) Of 0.85, With 50 Mm Thickrockwool Of 48 Kg /Cum Backing , Providing And Fixing False Ceiling At All Height Including Providing And Fixing Of Frame Work Made Of Special Sections, Power Pressed From M.S. Sheets And Galvanized With Zinc Coating Of 120 Gms/Sqm (Both Side Inclusive) As Per Is : 277 And Consisting Of Angle Cleats Of Size 25 Mm Wide X 1.6 Mm Thick With Flanges Of 27 Mm And 37Mm, At 1200 Mm Centre To Centre, One Flange Fixed To The Ceiling With Dash Fastener 12.5 Mm Dia X 50Mm Long With 6Mm Dia Bolts, Other Flange Of Cleat Fixed To The Angle Hangers Of 25X10x0.50 Mm Of Required Length With Nuts & Bolts Of Required Size And Other End Of Angle Hanger Fixed With Intermediate G.I. Channels 45X15x0.9 Mm Running At The Spacing Of 1200 Mm Centre To Centre, To Which The Ceiling Section 0.5 Mm Thick Bottom Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Wedge Of 80 Mm With Tapered Flanges Of 26 Mm Each Having Lips Of 10.5 Mm, At 450 Mm Centre To Centre, Shall Be Fixed In A Direction Perpendicular To G.I. Intermediate Channel With Connecting Clips Made Out Of 2.64 Mm Dia X 230 Mm Long G.I. Wire At Every Junction, Including Fixing Perimeter Channels 0.5 Mm Thick 27 Mm High Having Flanges Of 20 Mm And 30 Mm Long, The Perimeter Of Ceiling Fixed To Wall/Partition With The Help Of Rawl Plugs At 450 Mm Centre, With 25Mm Long Dry Wall Screws @ 230 Mm Interval, Including Fixing Of Gypsum Board To Ceiling Section And Perimeter Channel With The Help Of Dry Wall Screws Of Size 3.5 X 25 Mm At 230 Mm C/C, Including Jointing And Finishing To A Flush Finish Of Tapered And Square Edges Of The Board With Recommended Jointing Compound , Jointing Tapes , Finishing With Jointing Compound In 3 Layers Covering Upto 150 Mm On Both Sides Of Joint And Two Coats Of Primer Suitable For Board, All As Per Manufacturers Specification And Also Including The Cost Of Making Openings For Light Fittings, Grills, Diffusers, Cutouts Made With Frame Of Perimeter Channels Suitably Fixed, All Complete As Per Drawings, Specification And Direction Of The Engineer In Charge But Excluding The Cost Of Painting With : Fully Perforated Gypsum Plaster Board Of Size 1200 X 2400X12.5 Mm Having Approx. 15 % Perforated Area With Perforation Size And Pattern As Approved By The Engineerin-Charge And As Per Manufacturers Specification, With All 4 Side Tapered And Backed By Acoustical Tissue With Nrc Value Not Less Than 0.60 , Painting : With Ready Mixed Pink Or Grey Primer Of Approved Brand And Manufacture On Wood Work (Hard And Soft Wood , Painting Wood Work With Deluxe Multi Surface Paint Of Required Shade. Two Or More Coat Applied @ 0.90 Ltr/10 Sqm Over An Under Coat Of Primer Applied @0.75 Ltr/10 Sqm Of Approved Brand And Manufacture , With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works , Painting Steel Work With Deluxe Multi Surface Paint To Give An Even Shade. Two Or More Coat Applied @ 0.90 Ltr/ 10 Sqm Over An Under Coat Of Primer Applied @ 0.80 Ltr/ 10 Sqm Of Approved Brand And Manufacture , Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. New Work (Two Or More Coats Applied @ 1.43 Litre/ 10 Sqm. Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm. , Door Window Fittings : Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868), Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete : 300Mm X 16Mm , Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 300Mm X 10Mm , Providing And Fixing Aluminium Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete : 125Mm , Providing And Fixing Ptmt Butt Hinges With Necessary Screws Etc. Complete. 75X60x10 Mm Fitted With 5.5 Mm Dia M.S. Bright Bar Rod Weighing Not Less Than 34 Gms , Construction Of Inspection Banglow, Guest House (Inetrnal Electrification) Sub Head -I (Wiring) Wiring For Light Point/ Fan Point/ Exhaust Fan Point/ Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. A) Group A , Wiring For Twin Control Light Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, 2 Way Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm. Frls Pvc Insulated Copper Conductor Single Core Cable Etc As Required. , Wiring For Light/ Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit Along With 1 No 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. , Wiring For Circuit/ Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface/ Recessed Medium Class Pvc Conduit As Required 2 X 1.5 Sq. Mm + 1 X 1.5 Sq. Mm Earth Wire , 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire , Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/ Recessed Steel/ Pvc Conduit As Required. 3 X 1.5 Sq. Mm , 6 X 1.5 Sq. Mm , 6 X 4 Sq. Mm , Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along With Accessories In Surface/Recess Including Cutting The Wall And Making Good The Same In Case Of Recessed Conduit As Required. 20 Mm , 25 Mm , Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 3 Pin 5/6 Amps Modular Socket Outlet And 5/6 Amps Modular Switch, Connection Etc. As Required. (For Light Plugs To Be Used In Non Residential Buildings). , Supplying And Fixing Following Modular Switch/ Socket On The Existing Modular Plate & Switch Box Including Connections But Excluding Modular Plate Etc. As Required. 3Pin 5/6 Socket Outlet , Sub Head - Ii (Mcb & Dbs ) Supplying And Fixin G Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator)8 Way, Double Door , Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 215 Volts, On Surface/ Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. (But Without Mcb/Rccb/Isolator) 4 Way (4 + 12), Double Door , Supplying And Fixing 5 Amps To 32 Amps Rating, 240/415 Volts, C Curve, Miniature Circuit Bre Aker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required.Single Pole , Supplying And Fixing Following Rating, Double Pole, 240 Volts, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40 Amps , Supplying And Fixing Following Rating, 415 V, 10 Ka, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 40/63 A Tp , Sub Head-Iii (Fan,Fittings And Fixtures) Supplying, Installation, Testing And Commissioning Of 1200 Mm Sweep, Bee Five Star Rated, Ceiling Fan With Brush Less Direct Current (Bldc Motor) Not Less Than 32 W, Class Of Insulation B, 3 Nos Blade, 30 Cm Long Down Road, 2 Nos Of Canopies, Shackle Kit, Safety Rope, Copper Winding, Power Factor Not Less Than 0.9, Service Value (Cmm/W) Minimum 6.85 Air Delivery Minimum 215Cmm , 350 Rpm (Tolerance As Per Is:374-2019), Thd Less Than 10% Remote Or Electronic Regulator For Speed Control And All Remaining Accessories I/C Safety Pin, Nut Bolts , Washer, Temperature Rise=75 Degree C(Max. ), Insulation Resistance More Than 2Mega Ohm, Suitable For 230V, 50 Hz Ac Supply, Earthing Etc. Complete As Required. , Supplying, Installation Of Exhaust Fan Sweep Not Less Than 300 Mm In The Existing Opening, And Made Of Aluminium Die-Cast Motor Body, Front Protection Guard, Low Noise Operation, Robust Metal Body,Double Ball Bearing,Anti Dust,High Speed(Minimum 1350 Rpm) & High Air Delivery(Minimum 1000 Cmh) Including Making Good The Damage, Connection, Testing, Commissioning Etc. As Required. , Supplying,Installation, Testing And Commissioning Of Surface Mounted Square/Round Shape Led Downlighter Having Suitable Housing Lumen Efficacy = 100Lm/Watt, System Lumen Output = 1200 Lm, Cri = 80, Power Factor = 0.9 Having Suitable Diffuser And Cct In Between 4000K To 6500 K (I/C Both Limits) Complete With All Accessories Etc. Directly On Ceiling/Wall Including Connection With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable And Earthing Etc. As Required. , Sub Head-Iv (Service Connection) Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc/ Hume/ Metal Pipe As Required. Upto 35 Sq. Mm , Above 35 Sq. Mm And Upto 95 Sq. Mm , Supplying Of One Number Xlpe Insulated And Pvc Sheathed Aluminium Conductor Armoured Power Cable Of 1.1 Kv Grade With Isi Marked (Is 7098 (Part - I) / 1988 With Amendment Up To Date) Following Sizes. A) 3 ½ X 35 Sq.Mm , B) 3 ½ X 95 Sq.Mm , Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. A) 3.5 X 35 Sqmm ( 32 Mm ) , B) 3½ X 95 Sq. Mm (45Mm) , Supplying And Fixing Of Light Class G.I. Pipe Of 80 Mm Dia. (Nominal) 3 Metres Length Along The Pole For Protection Of Under Ground Cable As Required. , Sub-Head -V( Lighting Conductor And Earthing ) Providing And Fixing Of Lightning Conductor Finial, Made Of 25 Mm Dia 300 Mm Long, G.I. Tube, Having Single Prong At Top, With 85 Mm Dia 6 Mm Thick G.I. Base Plate Including Holes Etc. Complete As Required. , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Horizontal Run) , Providing And Fixing G.I. Tape 20 Mm X 3 Mm Thick On Parapet Or Surface Of Wall For Lightning Conductor Complete As Required. (For Vertical Run) , Providing And Fixing Testing Joint, Made Of 20 Mm X 3 Mm Thick G.I. Strip, 125 Mm Long, With 4 Nos. Of G.I. Bolts, Nuts, Chuck Nuts And Spring Washers Etc. Complete As Required , Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. With Charcoal/ Coke And Salt As Required. , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required , Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface/ Recessed Conduit/ Submain Wiring/ Cable As Required. , Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required , Providing And Laying G.I. Tape 32 Mm X 6 Mm From Earth Electrode Directly In Ground As Required. , Sub Head-Vii (Air Condition) Supplying, Installation, Testing And Commissioning Of Suitable Tr Capacity 5 Star Rating With Eer Not Less Than 4.3 , Split Type Inverter Air Conditioning Units Suitable For Indoor Unit To Be Fixed On The Wall Having Minimum Cooling Capacity 5400 Kcal/Hr Suitable For Single Phase Ac Supply Complete With Outdoor Unit Having Copper Condenser Coil,Suitable Clamp/Bracket For Fixing Outdoor Unit, Inter Connection With Suitable Copper Pipe Etc. Complete As Required. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supplying , Installation, Testing And Commissioning Of Automatic Voltage Stabilizer Of Capacity 5 Kva For Air Conditioner With 130-240 Volts Range For Operation Of Air Conditioner Complete With Testing Trail Run Etc Complete As Reqd. , Supply, Installation Testing & Commissioning Of Rigid Upvc Piping Complete With Fittings, Supports As Per Specifications And Duly Insulated With 6 Mm Thick Closed Cell Nitrile Rubber Insulation. A) 25 Mm Dia ( With 6 Mm Nitrile Rubber Insulation) , Construction Of Inspection Banglow, Guest House (For Sanitary & Water Supply) Providing And Fixing White Vitreous China Pedestal Type Water Closet (European Type W.C. Pan) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device (Handle Lever), Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : W.C. Pan With Isi Marked Black Solid Plastic Seat And Lid , Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm C.P. Brass Pillar Taps, 32 Mm C.P. Brass Waste Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Require: White Vitreous China Surgeon Type Wash Basin Of Size 660X460 Mm With A Pair Of 15 Mm C.P. Brass Pillar Taps With Elbow Including Operated Levers , Providing And Fixing Stainless Steel A Isi 304 (18/8) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : Kitchen Sink With Drain Board 510X1040 Mm Bowl Depth 250 Mm , Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Semi Rigid Pipe 40 Mm Dia , Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass (Of Approved Quality) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. , Providing And Fixing Toilet Paper Holder : Vitreous China , Providing And Fixing Soil, Waste And Vent Pipes : 100 Mm Dia Sand Cast Iron S&S Pipe As Per Is: 1729 , Providing And Fixing Trap Of Self Cleansing Design With Screwed Down Or Hinged Grating With Or Without Vent Arm Complete, Including Cost Of Cutting And Making Good The Walls And Floors : 100 Mm Inlet And 100 Mm Outlet Sand Cast Iron S&S As Per Is: 3989 , Cutting Chases In Brick Masonry Walls For Following Diameter Sand Cast Iron/Centrifugally Cast (Spun) Iron Pipes And Making Good The Same With Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand :6 Graded Stone Aggregate 12.5 Mm Nominal Size), Including Necessary Plaster And Pointing In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) : 100 Mm Dia , Providing And Fixing Ptmt Liquid Soap Container 109 Mm Wide, 125 Mm High And 112 Mm Distance From Wall Of Standard Shape With Bracket Of The Same Materials With Snap Fittings Of Approved Quality And Colour, Weighing Not Less Than 105 Gms. , Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face With Concealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 Gms. , Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 Gms , Providing And Fixing Brass Bib Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Brass Stop Cock Of Approved Quality : 20 Mm Nominal Bor , Providing And Fixing Chlorinated Polyvinyl Chloride (Cpvc) Pipes, Having Thermal Stability For Hot & Cold Water Supply Including All Cpvc Plain & Brass Threaded Fittings This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement, Trenching, Refilling & Testing Of Joints Complete As Per Direction Of Engineer In Charge. 15 Mm Dia Nominal Outer Dia Pipes , 20 Mm Dia Nominal Outer Dia Pipes , 25 Mm Dia Nominal Outer Dia Pipes , 32 Mm Dia Nominal Outer Dia Pipes , 40 Mm Dia Nominal Outer Dia Pipes , Providing And Fixing G.I. Pipes Complete With G.I. Fittings And Clamps, I/C Cutting And Making Good The Walls Etc Internal Work - Exposed On Wall 15 Mm Dia Nominal Bore , Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. Internal Work - Exposed On Wall 20 Mm Dia Nominal Bore , 32 Mm Dia Nominal Bore Metre , 40 Mm Dia Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 20 To 40 Mm Nominal Bore , Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) 20 Mm Nominal Bore , 32 Mm Nominal Bore , 40 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 15 Mm Nominal Bore , 20 Mm Nominal Bore , 25 Mm Nominal Bore , Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 40 Mm Nominal Bore Horizontal , Vertical , Providing And Fixing Uplasticised Pvc Connection Pipe With Brass Unions : 30 Cm Length 15 Mm Nominal Bore , 20 Mm Nominal Bore , Providing And Placing On Terrace (At All Floor Levels) Polyethylene Water Storage Tank, Is : 12701 Marked, With Cover And Suitable Locking Arrangement And Making Necessary Holes For Inlet, Outlet And Overflow Pipes But Without Fittings And The Base Support For Tank , Tube Well Boring With 100 Mm Diameter Casing Pipe For Hand Pump / Tubewell, In All Soils Except Ordinary Hard Rocks Requiring Blasting, Including Removing The Casing Pipe After The Hand Pump / Tube Well Is Lowered And Tested : Up To 6 Metres Depth , Beyond 6 M And Up To 12 M Depth , Beyond 12 M And Up To Required Depth , Providing And Placing In Position Filters Of 40 Mm Diameter G.I. Pipe With Brass Strainer Of Approved Quality. , Providing And Placing In Position Hand Pump Of Approved Quality For 40 Mm Diameter G.I. Pipe Complete With All Accessories. , Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete (New Work) : 50 Mm Nominal Bore , Providing And Fixing Square-Mouth S.W. Gully Trap Class Sp-1 Complete With C.I. Grating Brick Masonry Chamber With Water Tight C.I. Cover With Frame Of 300 X300 Mm Size (Inside) The Weight Of Cover To Be Not Less Than 4.50 Kg And Frame To Be Not Less Than 2.70 Kg As Per Standard Design: 150 X 100 Mm Size P Type With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Constructing Brick Masonry Manhole In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand ) With Reinforced Cement Concrete Top Slab With 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand (Zone-Iii) : 3 Graded Stone Aggregate 20 Mm Nominal Size), Foundation Concrete 1:4:8 Mix (1 Cement : 4 Coarse Sand (Zone-Iii) : 8 Graded Stone Aggregate 40 Mm Nominal Size), Inside Plastering 12 Mm Thick With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Finished With Floating Coat Of Neat Cement And Making Channels In Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : Inside Size 90X80 Cm And 45 Cm Deep Including C.I. Cover With Frame (Light Duty) 455X610 Mm Internal Dimensions, Total Weight Of Cover And Frame To Be Not Less Than 38 Kg (Weight Of Cover 23 Kg And Weight Of Frame 15 Kg) : With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 , Reducing Socket, Bend, Tee, Etc. , Construction Of Septic Tank. (50 Users) Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Suspended Floors, Roofs, Landings, Balconies And Access Platform , Vertical And Horizontal Fins Individually Or Forming Box Louvers Band, Facias And Eaves Boards , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , Cement Plaster Skirting Up To 30 Cm Height, With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand), Finished With A Floating Coat Of Neat Cement. , Retaining Wall Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 (1 Cement : 1.5 Coarse Sand(Zone-Iii) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources). , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Half Brick Masonry With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level. , Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In Charge, (For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.) , Dismentling Existing A-Type Building Demolishing Reinforced Cement Concrete Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. , Dismantling Doors, Windows And Clerestory Windows (Steel Or Wood) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking Within 50 Metres Lead : Of Area Beyond 3 Sq. Metres , Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 50 Metres Lead. For Thickness Of Tiles Above 25 Mm And Up To 40 Mm , Demolishing Brick Work Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer-In-Charge. In Cement Mortar , Dismantling Wood Work In Frames, Trusses, Purlins And Rafters Up To 10 Metres Span And 5 Metres Height Including Stacking The Material Within 50 Metres Lead : Of Sectional Area 40 Square Centimetres And Above , Dismantling Roofing Including Ridges, Hips, Valleys And Gutters Etc., And Stacking The Material Within 50 Metres Lead Of G.S. Sheet , Dismantling Aluminium/ Gypsum Partitions, Doors, Windows, Fixed Glazing And False Ceiling Including Disposal Of Unserviceable Material And Stacking Of Serviceable Material With In 50 Meters Lead As Directed By Engineer-In-Charge. , Boundary Wall With Fencing). Earth Work In Excavation By Mechanical Means (Hydraulic Excavator) /Manual Means In Foundation Trenches Or Drains (Not Exceeding 1.5 M In Width Or 10 Sqm On Plan), Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. , Dry Brick Pitching Half Brick Thick In Drains Including Supply Of Bricks And Preparing The Surface Complete : , Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : , Steel Reinforcement For Reinforced Cement Concrete Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level. , Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : , Reinforced Cement Concrete Work In Walls (Any Thickness), Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : , Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For , Lintels, Beams, Plinth Beams, Girders, Bressumers And , Columns, Pillars, Piers, Abutments, Posts And Struts , Brick Work With Common Burnt Clay Modular Bricks Of Class Designation 7.5 In Foundation And Plinth In : , 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : , 20 Mm Cement Plaster Of Mix : , Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. , Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface : Water Thinnable Cement Primer , Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm/Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade (Company Depot Tinted) With Silicon Additives. , Fencing With Reinforced Cement Concrete Post Placed At Required Distance, Embedded In Cement Concrete Blocks, Every 15Th Post, Last But One End Post And Corner Post Shall Be Strutted On Both Sides And End Post One Side Only, Provided With Horizontal Lines And Two Diagonals Of Barbed Wire Weighing 9.38 Kg Per 100 Metres (Minimum), Between The Two Posts Fitted And Fixed With G.I. Staples On Wooden Plugs Or G.I. Binding Wire Tied To 6 Mm Bar Nibs Fixed While Casting The Post (Cost Of Reinforced Cement Concrete Posts, Struts, Earth Work And Concrete To Be Paid For Separately) :- Payment To Be Made Per Metre Cost Of Total Length Of Barbed Wire Used. , Land Development Excavating, Supplying And Filling Of Local Earth (Including Royalty) By Mechanical Transport Upto A Lead Of 5Km Also Including Ramming And Watering Of The Earth In Layers Not Exceeding 20 Cm In Trenches, Plinth, Sides Of Foundation Etc. Complete. , O.H. Tank Not Found!!! , Solar Street Light Godox S60 Led Focusing Light, Outdoor & Indoor , Gate Pillarlight For Home Outdoor Garden Post Decorative Lamp , Dg Set , Audio Visual Systems Projector (Sony) , Motorised Screen And Accessories (6Ft / 8 Ft) , Digital Podium All-In-One System , Chairman Unit , Delegate Unit , Amplifier 80 Watt , Microphones , Ceiling Mount Speaker ( 6 Watt) , Wire & Lane Cabling For Speaker , Projector & Amplifier Hdmi Wire Connector Wiring Set , Installation, Testing And Commissioning Charges And Configuration Of The System , M.I. 64 -T.V. 4 Nos. @ Rs. 75000/- Per Nos. , Cctv With Motion Sensor And Sound Recorder Including Supplying & Fitting Fixing (Philips Hsp 3800) , Furniture & Fixture Sofa Set A/ Waiting Hall , B/ Executive Guest Room , C/ Suite Room , Executive Table A/ Executive Guest Room , B/ Suite Room , Executive Chair , Bed A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Matress A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Chair A/ Guest Room , B/ Staff Room , C/ Suite Room I)Type-I , Ii)Type-Ii , D/ Security Room , Bed Sheet A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Pillow A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Blanket A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Mosquito Net A/ Guest Room , B/ Staff Room , C/ Suite Room , D/ Security Room , Bath Towel , Hand Towel , Kitchen Utensil A/ Gas Stove , B/ Pressure Cooker , B/ Cookware Set , C/ Dinner Set , D/ Cup Plate Set , E/ Cutlery Set , F/ Mixture Grinder , G/ Electric Kattle , H/ Microwave Oven , I/ Container , Conference Table , Conference Chair (Elentra-112 Steel Frame Fixed Chair)
Contract Date: Jun 16, 2026 Contract Value : ₹ 4.10 Crore
Government Departments No of Bidders 2
Assam View Result →
11.
Coal and Mines #11284520 AOC
Tender for Construction Of 02 Nos. Air Crossing At 35R/-92L For Depillaring Panel No. 4J-9 Of 4A Seam At Jhiria Ug Mine.
Contract Date: Jul 01, 2026 Contract Value : ₹ 23.64 Lakh
Boards / Undertakings / PSU No of Bidders 3
Chhattisgarh View Result →
12.
Defence #11206901 AOC
Tender For Provision Of Work Services For Sdr Facility In Abr Lab At 9Brd Afs Pune Under Ge Af Lohegaon - Taking down the existing surface batten type point wiring of aluminium/Copper for Light, fan, Sockets, power sockets, stair case light pointcomplete with switch socket regulator , bracket fitting etc and making good disturbed surfaces for wall, floors etc as directed by Engr- in charge. 2 Taking down the sub main wiring of any dia / sq mmon teak wood batten /PVC conduit GI earth wire all as directed. 3 Material and labour for providing point wiring with two runs of 1.5 Sqmmmulti stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 1.5 Sqmm single core multi stranded copper conductor FRLSH PVC insulated 1100 Volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings/fixture etc and open recessed type Plastic Enclosure( Plastic Switch Board )ISI Marked (IS:14772) for housing switches / sockets all a specified and directed 4 (a) One Fan point/ light point controlled by one switch. 5 (b) One 3 pin socket 5 A on same board. 6 (c) One 3 pin socket 5 A on independent board. 7 Material and labour for providing point wiring with two runs of 2.5 Sqmmmulti stranded copper conductor FRLSH PVC insulated single core 1100 volts grade & with one run of 2.5 Sqmm single core copper stranded FRLSH PVCinsulated 1100 volts grade wire for continuous earthing complete in and including PVC casing and caping with all fittings / fixture etc and open recessed type Plastic Enclosure (Plastic Switch Board)ISI marked (IS 14782) for housingone 15 A Switch / socketsall a specified and directed 8 M/L for sub main wiring with two runs of single core 4.0 Sq mmFRLSH PVC insulated unsheathed multi stranded copper conductor1100 V grade with colour code and one run of 4 Sq mmsingle core FRLSH PVC insulated unsheathed multi stranded copper conductor green colour cablefor continuous earthing complete in & including PVC casing & caping with all fttiing & fixtures all as directed and specified.(Note:- Two runs of 4 Sqmm copper cable & one run of 4 sqmm copper cable including PVC casing & caping shall be mesured and paid as one length) 9 M/L for sub main wiring with two runs of single core 6.0Sq mmFRLSH PVC insulated unsheathed multi stranded copper conductor 1100 V grade with colour code and one run of 6.0 Sq mmsingle core FRLSH PVC insulated unsheathed multi stranded copper conductor green colour cable as earth continuity conductor drawn in& including casing & caping all as directed and specified . ( Note:- Two runs of 6 Sqmm copper cable & one run of 6 sqmm copper cable including PVC casing & caping shall be measured & paid as one length ) 10 Supply and fix switch piano flush type 5 Amp one way, ISI Marked 11 Supply and fix Socket out let 2in 1, 5 pin 5 Amp ISI Marked 12 Supply and fix switch socket combination 5 / 16 A, 5 in 1, flush type,ISI Marked 13 S/F Fan Regulator electronic step type 100 W,ISI Marked complete as directed 14 Supply and fix ceiling rose surface type bakelite / PVCthree terminal 65 x 50mm. ISI Marked 15 Taking down existing VTPN DB grouted in wall and S&F Vertical double door Distribution board TPN 8 way with busbarand consisting ofMCCB 4pole 160A 16KA - 1 NO complete including connecting LT cable and outgoing submain wiring etc and testing complete all as specified and directed by Engr-In-charge. (Note : Cost of MCCB 160A, 4pole, 16KA -01 Nos is included in quoted rates) 16 Supply and fix sheet metal enclosure MCB DB double door SPN 12 way 230 V with neutral link and connecting to wiring complete all as specified and directed by Engr-In-charge. 17 Supply and fix MCB SPN B Curve 240 V, 32 Amps. complete all as directed at site. 18 Supply and fix MCB SP B Curve 240 V ,6 to 32 Amps complete all as directed at site. 19 M/L for providing earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.00mm dia by means of bolts, nuts, checknuts & washers of GI or steel and connecting to earth dolly all as shown in electrical plateNo. 3 of SSR Part I of 1991 & testing complete including 15mm dialight grade GI pipe upto 7.5mtr long, excavation in any type of strata, PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm with frame, test box , funnel, wire mesh with GIwatering pipe etc. 20 Supply and fixing in replacement of double pole and neutral sheet metal enclosure with a two pin and earth plug and socket, one single pole 20 Amps, 240V MCB complete all as specified and directed 21 S&F of CEE Panel mounted receptacles 16 A, 3 pole straight, IP 44 Protection,including Eclosure made of high quality plastic or AMELAN in aggressive atmosphere with high resistant to chemicals as well as high heat resistant contact carrier and nickel plated contacts complete all as specified and directed. 22 S&F of CEE Panel mounted receptacles 16 A, 5 pole straight, IP 44 Protection,including Eclosure made of high quality plastic or AMELAN in aggressive atmosphere with high resistant to chemicals as well as high heat resistant contact carrier and nickel plated contacts complete all as specified and directed. 23 S&F of CEE plug 16 A, 3 pole straight, IP 44 Protection,Eclosure made of high quality plastic or AMELAN in aggressive atmosphere with high resistant to chemicals as well as high heat resistant contact carrier and nickel plated contacts, strain relief and protection against kinking, enclosure with thread lock and safety slide complete all as specified and directed. 24 S&F of CEE plug 16 A, 5 pole straight, IP 44 Protection,Eclosure made of high quality plastic or AMELAN in aggressive atmosphere with high resistant to chemicals as well as high heat resistant contact carrier and nickel plated contacts, strain relief and protection against kinking, enclosure with thread lock and safety slide complete all as specified and directed. 25 S&F of Sub main wiringwith 4 X 6 sqmm single core cable FRLSH PVCinsulated unsheathed of copper multi strandard conductorcable , 1100 votls grade drawnin PVC casing caping and including PVC casing caping and insulated 1X 6 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dollycomplete all as specified and directed by Engineer-in-charge. (Note:- 4 lengths of 6 Sqmm & 1 length of 6 sqmm cable and PVC casing caping will be measured as one length). 26 S&F of Sub main wiringwith 4 X 10 sqmm single core cable PVCinsulated unsheathed of copper FRLSH multi strandard conductorcable , 1100 votls grade drawnin PVC casing caping and including PVC casing caping and insulated 1X 10 sqmm unsheathed multistranded FR-LSH copper conductor cable for earth continuity and connected to common earth dollycomplete all as specified and directed by Engineer-in-charge. (Note:- 4 lengths of 10 Sqmm & 1 length of 10 sqmm cable and PVC casing caping will be measured as one length). 27 Taking down carefuly copper strip of Size upto 32x6mm including pocelain/epoxy insulator, storing in safe custody for reuse and refixing the taken down copper strip as directed at site including supply and Fix of new epoxy insulator at a gap of 1 meter and brazing of copper strip with double nut and bolt with overlap of 3 cm complete all as directed by Engr-In-Charge. 28 Supply and fixEnergy efficient recess mounted LED panel fitting 36 Watt suitable for 2x2 grid in white colour with high quality diffuser for uniform light & high Efficiency. Made from CRCA sheet, Pre-coated white color. Separate replaceable electronic driver, lumen constant of 6000K colour temperature with current electronic connections as directed. 29 Supply and fix MCB TPN 415 V, 32 Amps 10 KA C Curve in DB complete all as directed at site. 30 Supply and fix MCB TPN 415 V, 40 to 100 Amps 10 KA C Curve in DB complete all as directed at site. 31 M&L for making hole in Brick masonary / Stone masonary wall of any thickness and height of round shape and suitable for exhaust fan of 380mm dia and making good disturbed wall and painting distubed area as original complete all as directed. 32 Supply and fix exhaust fan, steel body heavy duty AC single Phase. 230V of size 380 mm sweep with, blades, and frame and louver complete all as specified and directed. 33 1. Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 2TR having dual rotor inverter compressor, 100% copper IDU and ODU, installation kit with extra copper piping, connection electric cord, drain water pipe as per site requirement and incl MS Stand for outdoor unit fixng and core cutting in stone masonary wall if required for passing of refrigerant piping and cables etc and making good disturbed surfaces matching to existingcomplete all as specified and directed by Engr-In-Charge 34 Supply and fixing of voltage stabilizer for automatic operationsingle phase naturally air cooled indoor typefor input variationbetween 170V to 280V with outputVoltage 230v with accuracy +/-2.5% and of capacity 5 KVA completeall as directed. 35 Supply and laying HDPE DWC pipe 135 mm inner dia SN8 incl coupler on wall/ along ground/ along channel/ in trench/under roof/ along pillar or as directed complete. 36 Supplying ,Laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE(cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor of size 300 sqmm 3.5 core, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete all as specified. 37 S&F Vertical double door Distribution board TPN 8 way with busbarand consisting ofMCCB 4pole 160A 16KA - 1 NO complete including connecting LT cable and outgoing submain wiring etc and testing complete all as specified and directed by Engr-In-charge. (Note : Cost of MCCB 160A, 4pole, 16KA -01 Nos is included in quoted rates) 38 Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty)1100 Volts grade with stranded copper conductor of size 35 Sqmm 3.5 Core laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix on wall etc all as specified and directed. 39 Supply install, test and commissioning of Powder coated LTpanel cubical Indoor type floor standing type compartmentalized in construction fabricated from CPRI approved manufacturer specified in particular specification and made out of 3 mm thick CRCA sheet & suitable size to accomodate all accessories / fittings, to accommodate incoming MCCB/ACB and TPN Copper bus bars , incomerand outgoing feeders .The TPN bus bars shall be insulated with colour coded heat shrinkable sleeve and shall be mounted on DMC/epoxy insulator. Thecubicle shallhave bottom frame & dimension as required for panel & stand shall be made out of equal angle iron of size 50mm x 50mm x 6mm height 600mm. A detachable predrilled gland plate of thickness not less than 3 mm thickpowder coated should be used at thebottom for entry of armoured cableof adequate size with glands.The above panel shall be front & back openable lockable /openable by key from both side. Copper extension link shall be provided at incomer & outgoing end of MCCB of rating 63 Amps & above. The panel shall be powder coated with 7 tank process of approved thickness complete including CTs, control wiring by 1.5Sqmm Wire, including provision of heat shrink sleeve on each cable core within panel, lugs, nut bolts, washers etc complete all as specified and 40 a) Copper bus bar 500 Amps for 4 pole-01 SETb) MCCB FP 320 Amps415 Volt 50 KA,Ics =100% Icu WITH thermal and magnetic setting type - 1 Nosc) MCCB FP 100 Amps - 415 Volt 16 KA,Ics =100% Icu- 5 Nos f) RYB Indicators - 1 Set and g)Digital 3 Phase Amp Meter and Voltmeter with selector switch - 1 SetNote - (i) The lay out drawing of the panel shall be got approved by the contractor before panel fabrication. 41 Supplying ,Laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE(cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor of size 25 sqmm 3.5 core, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete all as specified. 42 Supply and fix Voltage stablizer for automatic operation, three phase , naturally oil cooled, inddoor type anddesigned for input variation between 300V to 480 V with accuracy + 2.5 % , IP55 Protection, 50 Hz, Unbalance type, copper wounded, matallic body duly powder coated, liftinghooks, digital display, relay controlled for smooth and silent operation with first filling of transformer oil upto specified level , with zero distortion waveform, sesitivity +/- 1%, overall Efficiency more than 95 % digital multifunction meterand speed of correction 8 volts per second and of capacity 30 KVA complete all as specified and directedNote: (a) Stablizer shall be free from hunting during automatic operation and No load losses shall not be more than 5% of rated output current.(b) Protection: (i) Overload short circuit protection at input end by MCCB 4 pole of suitable size as per recommendation of OEM - 01 Nos (ii) High / low voltage cutoff(iii) By pass arrangement - providing 01 No 4 pole on load changeover switch of suitable rating (iv) single phase sequence change protection.(c) Acceptance Test :- Testing of servo voltage stabilizer should be carried out as per BIS 9815 (Part-I) in OEM factory in the presence of rep of Accepting Officer and contractor/his rep. Contractor shall give 45 days in advance intimation with respect of date of testing. The following testing shall be carried out:(i) Physical Examination (ii) Insulation resistance (iii) High voltage test (iv) Leakage current test (v) Output voltage (vi) No load current (vii) Measurement of No load loss induced voltage testNote : Before make and specification approval type test report of OEM as per BIS 9815 Part - I should be produced by contractor for the specified capacity / next higher capacity of any voltage range from Govt Lab / NABL accredited lab. 43 Supply, installation,Boring, erection, testing and commissioningof Copper bonded(150 micron) MS solid rod electrode of dia 17.2 mm and 6 mtr long with high purity electrically conductive granular material having ultra low resistive value of 0.001 Ohm-m. Earthing Electrode shall bemade by embedding copper bonded MS Rod electrode in 100mm dia macronite conductive concrete made by mixing high purity conductive granularmixed with cement in the ratio2:1 (2 part of high purity electriclly conductive granular and 1 part cement and one litre of water per kg of mix ). The earthing electrode shall be augured inbore hole of dia not less than 100mm and6 Mtr depth. The conductive material shall confirm to BIS: 3043-2018. The rod shall be embedded in conductive concrete at factory with concrete having resistivity 0.040 Ohm-m. The top edge of the electrode shall comprise of plate provided with 04 holes for connections of the earthing strip,including brass nut bolts for connections of the strip the copper strip shall be duly brazed/welded with connection terminal of earthing rod, including FRP square chamber cover 300mm x 300mm x 250mm with top cover complete all as specified.All the material such as copperbonded MS rod and concrete mix shall be Ph nuetral, chemicaly inert and non corrosive complete all as specified and directed by Engr-In-Charge.i) The contractor shall submit type test report issued by the CPRI for high purity, electrically conductive earthings , confirms to rated short time withstand current20 KA per sec. ii) The factory made electrode shall be tested at factory and test report shall be submitted.iii) Factory testing of individual earthing shall be carried out in presence of rep of accepting officer and report shall be submitted.iv) The contractor shall obtain make approval for high purity electrically conductive granular duly by submitting certificates conforming to resistivity is 0.001 ohms by granular manufacturer.v) On installation of earthings at site, 04 to 05 Nos earthings shall be connected in grid to achieve less then 1 ohm resistance of grid, If desired resistance is not achived the contractor shall redo the same without any extra cost. vi) The contractor shall submit certificate issued by OEM of earthing electrode starting that The desired maintenance free earthing resistance less than 1 ohm. The year will be maintained for not less than 25 years. 44 M&L for providing earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 32x6 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point, providing charcoal and common salt all as shown in electrical plateNo. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including exaction/earth work in any type of strata PCC (1:3:6) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete (1:2:4) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg/sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs, including galvanised iron strip 32x6 mm with GI protection pipe of 40 mm medium grade 7.5 meter long, etc complete all as specified.Note:-(i) Venders are bound to get earthing result upto 5 Ohm for single earthings and 3 Ohm with the grid of two earthing.Any additional work and material required to achive the required result is included in the cost quoted by the tenderer.(ii) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled.(iii) Refill the pit with M&L for black cotton soil 1 cum. 45 M/L for providing earthing complete with Copper earth plate electrode 600 mm x 600 mm x 3.15 mm thick buried directly in ground earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to copper earth strip 20 x 3 mmby means of bolts, nuts, checknuts & washers of copper and connecting to test point, providing charcoal and common salt ,all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab 50 mm thick in cement concrete ( 1: 2 : 4 ) type B1 (reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade and lugs,including copper earth strip 20 x 3 mmwith GI protection pipe of 25 mm medium grade 7.5 meter long, etc complete all as specified.Note-- (i) Vendors are bound to get earthing result upto1 Ohm with grid of three earthings and 2 Ohm with grid of two earthing, 3ohm with single earthing, Any additional work and material required to achive the required result is included in the cost. (ii) Excavated material to be removed from the site and deposit at the distance not exceeding 50m distance and levelled.(iii) Refill the pit with M&L for black cotton soil 1 cum. 46 S&F in repair of test point made out of gun metal or phosphorous bronze of size 75x50x5mm duly mounted on epoxy insulator 02 Nos.Drilling of upper & lower portion of test point for incoming & outgoing connections with brass nut bolt to be fitted in and including terminal block cover box made out of M.S sheet 2mm thick as per the sample duly painted with two coat of enamel paint over a coat of red oxide primer. 47 S & F copper earth continuity conductor or main earthing lead of size 32x6 mm fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for earthing etc.and connecting with earthing test point oras required complete all as directed. Note: Earth work required shall be deemed to be included in quoted rate, nothing extra shall be paid on this account. 48 Excavation in trenches not exc 1.5 m wide andnot exc 1.5 m in depth and getting it out for laying of cable / pole etc. 49 Soft/loose soil 50 Hard/dense soil 51 Soft/disintegrated rock 52 Returning/ Refilling of excavated soil including spreading levelling and well ramming in layers for any type of soil. 53 Removing the surplus soil to a distance not exceeding 50 mtrs from the starting point and depositing at a height not exceeding 1.5 m above ground level. 54 M&L for Cutting the existing road precisely for laying of cable crossing pipe and making good the distubed surface of road as per original after laying of pipe and removal of debries complete all as directed.Note: The cost of making good is deemed to beincluded in quoted rate. 55 Supply and fixof MCCB FP 63 AmpsFixed type with breaking capacity16 KA with Sheet metal enclosure of 2 mm thick CRCA sheet single door with provision opening for incomming and outgoing cable/ submain including connections and testing for proper functioningincl taking out unserviceablecomplete all as specified and directed.
Contract Date: Feb 04, 2026 Contract Value : ₹ 35.23 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Maharashtra View Result →
13.
Defence #11192596 AOC
Tender For Provn Of Central Mi Room At Nimu; 1 Lump sum price worked out by the contractor for BUILDING WORKSas listed in Schedule ‘A’ Part-I representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 43 2 Lump sum price worked out by the contractor for (SITE CLEARANCE, EXCAVATION & EARTH WORK)as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 44 3 Lump sum price worked out by the contractor for (INTERNAL ELECTRIFICATION)as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 50 4 Lump sum price worked out by the contractor for (INTERNAL WATER SUPPLY)as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 52 5 Lump sum price worked out by the contractor for (ROAD, PATH & HARDSTANDING)as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 54 6 Lump sum price worked out by the contractor for (SEWAGE DISPOSAL)as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 55 7 Lump sum price worked out by the contractor for (AREA DRAINAGE)as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 56 8 Lump sum price worked out by the contractor for (SHED FOR DG SET)as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 58 9 Lump sum price worked out by the contractor for (HOT WATER SUPPLY)as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 59 10 Lump sum price worked out by the contractor for (EXTERNAL ELECTRIFICATION)as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 65 11 Lump sum price worked out by the contractor for (EXTERNAL WATER SUPPLY)as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/belowthe lump sum price prepriced by the MES B/F from Sl page No. 66 12 SCH A PART - XII (MISC B/R & E/M ITEMS) (REFER BOQ)Note: This schedule is not pre-priced by MES and the rate indicated as Rs 0.00 under Col 5 signifies this fact only 13 INTERNAL ELECTRIFICATIONS&F Double door three phase prewired distribution board vertical DB VTPN 8 way with acrylic door made out of CRCA sheets 1.6 mm thick,phosphatised powder coated with copper Bus Bar 200 Amps, 415 V,IP 43/IK09, Earth Stud, Din Rail, Polymide terminal blocks for incoming and outgoing circuits, inbuilt loose wire box ,ground terminal blocks ,duly prewired with thimbled flame retardant copper conductors and poly layer for protection in and includingMCCB4 pole 63 Amp rating repturing capacity 16 KA.(Note:- Single Phase MCBs are to be measured and paid for seperately) 14 S&F LED building security light, pressure die cast aluminum housing, 20/25 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 5 mtr from groundwith MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge.NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate. 15 S&F new wall mounted fan of approved make and type complete all as specified and as directed. 16 S&F TV Co-axial socket 1 module, complete all as specified and as directed. 17 S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amps 18 INTERNAL WATER SUPPLYS&F single piece Vitreous china wash down water closet pan Pedestal Pattern white, with seat white closed pattern with flat bottom and cover mild steel chromium plated or aluminized hinging deviced including flushing system , pipe and joint etc and connection to drain, flushing, pipe, anti-syphonage pipe, and fixing arrangements with fixing bolts etc including making good the disturbed portion of floor in cement concrete 1:2:4 type B-0, as in repairs complete all as spd & directed complete all as specified and directed by Engr-in charge.. 19 S&F CP Grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) dia of outlet is 100 mm complete all as specified and directed by Engr-in charge. 20 S&F hand shower (health faucet ) with 8mm dia and 1 meter long CP flexible tube and wall hookcomplete all as specified Make: Cera, Jaquar , Marc & Hindware as per Sample and directed by Engr -in Charge 21 S&F Soap dish (S/S), any type, fixed to plugs with chromium plated brass screws, all as specified and directed by Engr-in charge. 22 ROAD, PATH & HARD STANDINGM&L for wet mix macadam (WMM) for 150mm thick (compacted thickness) laid in two layers of 75mm each grading as per table 400-13 of MoRTH (Ministry of Road Transport & Highways) specification of Road and Bridge works 2013. Manufactured in WMM plant, material comprising of clean, crushed, graded aggregate and granular material premixed with water to a dense mass, spreading with sensor paver and rolling with vibratory roller of capacity 80-100 KN static weight and conslidating required gradient and camber. The finished surface tolerance to be as per table 900-1 of MoRTH specification for road and bridge works 2013 complete all as specified and directed by Engr-in-Charge. 23 M&L for applying thermoplastic paint marking 2.5mm thick centerline ,stop line,dashes,arrows etc and n exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint ofapproved colour confirming to BS 3262-1989 with special applicater machine all as per manufacturers instructionof any colour on road surfaceincluding cleaning with gunny bags removing all loose dirt/dust complete all as specified and directed. 24 M&L for RCC Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and Roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc, complete with effective depth of 1.5 meter and overall depth of 3 meter for 100 users. 25 M&L for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3M Dia and 3 M Depth. 26 EXTERNAL ELECTRIC SUPPLYS&F Polycarbonate junction boxes IP 65 protection of size 0.200 x 0.250 x 0.155 m complete with 1 Nos MCB SP 2.5 Amp & 4 way industrial connector including clamp made out of MS flat 30x5mm connection from junction box to street light fitting with three single core PVC insulated, PVC sheathed wire 2.5 Sqmm copper & PVC conduit 20 mm dia complete all as specified and directed by Engr-in-charge. 27 Excavation in trenches by cutting of road crossing/PCC hard standing, under boundary wallfor laying of pipe/cable including making good the existing surface with same finish to match the original finish complete all as specified and directed by Engr-in-charge. 28 S&FHT/LT MS cable route indicator 4 dia fixed with two Nos of nut, bolt and washers and provision of PCC 1 : 4 : 8 type D-2 using 40 mm grade stone aggregate of not less than 0.018 cum in each at base buried under the groundincl necessary earth work complete all as specified and directed by Engr-in-charge. 29 Supply, installation, testing and commissinoning LT panel board suitable for working on 3 phase ,4 wire ,415 volts, AC ,50Hz indoortype, cubicle, floor mounted, free standing, dust and vermin proof, air ventilation factory fabricated made out of 2 mm thick CRCA sheetduly powder coated and shall be CPRI Approved and as approved by GE. The Panel shall have front and rear opening, locking arrangement, cable alleys, bus bar chamber and switch gear compartment, hinged door with rubber gasket, bottom cable entry holes for incoming and out going cables, earthing terminals, affix danger notice plate, glands, AI bus bar duly covered with heat shrink sleeves colour coaded duly fixed onDMC/SMC insulators, housed in a separate bus bar chamber and control wiring with copper conductor cables of adequate size and length, incoming and outgoing MCCBs shall have extended bus bar links and mounted on 50x50x5mm sizeMS angle iron frame duly painted including PCC 1:2:4 Type B1 (using 20 mm graded stone aggregate ) in foundation design subject to approved of AGE (I) Nimu to sent the site requirementcomplete all as specified and directed including comprising of following :- 30 (a) MCCB 400 Amps, FP, 36 KA, 415 volts, 50Hz - 01 No (I/C)(b) MCCB 200 Amps, FP, 25 KA, 415 volts, 50Hz - 02 No ( CHS)(c) MCCB 125 Amps, FP, 16 KA, 415 volts, 50Hz - 04 Nos (APFC, TPN DB -02, Spare )(d) MCB SPN 40 Amps, 10 KA, 220 volts, 50Hz - 03 Nos (Garage,Street light, Spare-1)(e) On load Chengeover 400 Amps 4 pole -01 No (f)Digital voltmeter, with VSS - 01set(g) Digital Ammeter, with CTs & ASS - 01 set(h) LED phase indication lamps RYB - 01 set(j)Single phase Rotary Automatic Light controller Nature switch with voltage range 120-440V,AC,20 Amps,IP-65,50HZ-01 Nos(k) Copper bus bar TPN 600 Amps rating - 01 set 31 Labour for boring underground upto 100 mm bore for road crossing 3 mtr to 10 mtr not exceeding 1.5 mtr in depth for laying of electric cable and GI tubing in soft/loose soil complete all as specified. 32 EXTERNAL WATER SUPPLYM&Lfor cutting existing GI pipes and insertion of new Tee branches of suitable size to take branch connection of 50mm dia PP-R.Note : Suitable size of Tee branch is deemed to be included in the quoted rate. 33 Construction of stone masonary valve pit chamber of size 90cm x 90 cm x 90 cm (internal dimension) including all necessary excavation and earthwork in hard / dense soil and disposal of surplus soil to a distance not exceeding 50 meters & deposting the same as directed includingPCC in foundation of the mixture (1:4:8) D-2 stone masonary in cement motor 1:4 rendering 15mm thick in cement mortar 1:4 internally finished even and fair and pointing flush externally as the work proceeds in the same mortar as of stone masonary including mild steelframe (made out ofangle in 40x40x6mm) MS steel cover 3.15 mm thick with handle and locking arrangement with ginges angle iron flat as requiredat site including painting of all posed MS work with two coat of synthetic enamel paint over a coat of red oxide primer and painting all the steel surfaces embedded in PCC with two coats of black bituminuos paint andall other relevant work complete . 34 M&L for providing tracer/anti freezing cable of capacity 20W/m required to keep the pipe warm upto avoiding freezing all as specified including electrical wiring cable for connection of suitable size 35 (CENTRAL HEATING SYSTEM)Electric Hot Water Generator : Supply, installation, testing and commissioning ofpackage type electric Hot Water generator constructed out of MS sheet having top open-able cover for easy access and removal of heaters. The HWG shall be suitable for indoor mounting. The generator shall be provided with 50mm thick fibre glass insulation 32 kg density finished with 0.8mm / 22G aluminium cladding sheet. The generator shall have electrical capacity of 50 kW. The heater shall be electrical resistance type, copper tube with chromium plating. The generator shall be complete with float valve, pressure gauge with ball valve, master and bank thermostats, etc. The generator shall be suitable for 3 phase, 415+ 10% Volts, 50 Hz. AC supply. The generator shall complete with self-contained incoming isolation, ammeter, voltmeter, contactors for heater banks in three steps complete with manual/auto rotary switches. 36 Notes:- (i) Allneccassary accessories required for the proper fucntioning of Hot Water Genearator are included in price.(ii) The prices should include lifting, shifting and positioning of units at Site.(iii) Hot Water Genearator installation to done as per Manufacturer recommendation with all installation requirements i.e Foundation, Vibration Isolator,Insulationetc as recommended by Manufacturer for the Ambient Temperature of Site. ODU installation is included in ODU price which includes the Civil Struture, Mechanical Structureetc as recommended byManufacturer.(iv) The Contractor/OEM will shall submit the Hot Water Generator capacity/Burner Capacity conforming to relevant IS Code(v) OEM should submit the Installation and Maintenance Schedule/ Manual for the Boiler. 37 GLYCOL CIRCULATION CENTRIFUGAL PUMPS: Supply, Installation, Testing & Commissioning of PN16 ratedAxial Split Coupled Vertical Inline water pump set with CI casing, Bronze Impeller, SS Shaft and externally flushed outside type balanced mechanical seal and non overloading motor, as per specifications and drawings. with Suitable HP, TEFC squirrel cage induction motor with IE3 type class F insulation, Motor shall be rating of IP 55, operating on 415 ±10% volts, 3 phase, 50Hz AC Supply. The external flush line must be used for the purpose of heat dissipation from the mechanical seal.Pumps with performance characteristics as given below:The internal components of pumps including mechanical seal shall be suitable to sustain a fluid temperature of -25 Degree Celcius to 120 Degree Celcius. Vendor shall be provide antivibration arrangement for pumps . 38 The scope also shall include following below mentioned:(i) Electrical by pass starter for pump setas recommended by OEM. (ii) 25 mm thick polyviny nitrile rubber insulation duly cladded between aluminium sheets of 0.5mm thickness and properly clamped to pump.(iii) Pressure gauges 150 mm dia -03 Nos (iv) Mounting frame with antivibration pads (In case pumps are inline, anti vibration system shall be as per Manufacturers recommendation) (v) RCC/Cement concrete foundation for the pump unit. (In case pumps are inline, foundation shall be as per Manufacturers recommendation).Pump capacity are as under:Capacityand pump headnot less than flow 25 USGPM , Head 20 mtr (Refernce Model No. : Armstrong : Series 4300 - 40-150 - 2p - 1.5 kW) each including the Triple duty valve and End Suction guide. 39 EXPANSION TANK and Pressurisation Unit:Supply, Installation, Testing and commissioning of INSULATED PRESSURISED CLOSED WATER EXPANSION TANK suitable for total volume ofGlycol - Water Solution, circuit along with necessary accessories such as along with necessary accessories such as 2 Nos pumps (1working +1standby) with Pressure Transmitter andinterconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc.with Pressure Transmitter andinterconnecting Pipe & Isolating Valve complete with piping connections, safety relief valve, drain valve, pressure gauge, automatic air purging arrangement, etc. The tank shall be pre-charged. Expansion tank Shall be with replaceable heavy duty butyl rubber bladder. The tankconnections should be as per OEM recommendationsand 20 mm drain and charging valve connection to facilitate the on site charging of nitrogen in the tank.The tank shall be fitted with lifting rings and a floor mounting skirt for vertical installation. The tank must be constructed in accordance with IS-STANDARD 2825-1969 (withlates Revision)and Rated at PN 16 . The complete system shall be sourced from single manufacturer and supplied and installed with all accessories and safety fixtures required for proper functioning of the complete hydronic system.The tank shall be duly painted in approved colour shall be complete with pressure switches and power distribution and control panelIP55 Control Panel, Pressure Transmitter, interconnecting piping & wiring. (Tank capacity 500 Ltrs). Hot Glycol - Water closed vessel pressurized expansion tank as described above shall be duly Insulated with 50 mm thick PUF/Nitrile Rubber insulating material or Equivalent U valueInsulating Material and cladded with aluminium Sheet (20G). Electrical by pass starter for pump setas recommended by OEM. 40 Expansion Tank of 500 Lts capacity 41 PRESSURIZATION UNIT: for Pump Set -03 Nos with Control Panel and accessories. 42 Make Up TANK: Supply, installation, testing and commissioning of factory made Make up Water Tank, Rectangular/Circular shape, of 4 mm thick MS sheet (IS 2062), of capacity of 550 litres complete with inlet, outlet, overflow, drain pipe of MS and vent with flame arrestor. Tank will be provided with supports made out of minimum 50mm angle iron duly painted, to keep tank base at minimum (1000mm) above FFL. Service platform shall be provided as per recommendations of OEM. The tank shall be provided with remote indication of levels provided level switches for on-off operation of tranfer pump. Extra high level and extra low level alarm shall be provided. Tank and structure shall be painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.Make up Water tank as describedabove should beduly Insulated with 50 mm thick PUF/Nitrile Rubber insulating material and cladded with aluminium Sheet (20G). 43 Supply, Installation, Testing and Commissioning ofSteel plate Radiator( Wall Mounted) confirming EN- 442 , working pressurerange from 10-13 bar having workinh temparture of 110°C, complete with top grill side cover as standard along with inlet ,outlet valve, Air purge valve andwith threaded plug, flow regulator as per OEM.The below desired capacity should be calculated at Altitude of 3600 mts above sea level. Capacity calculation sheet to be provided to Engineer in Charge. The below mentioned capacity is at INLET TEMP: 75 Degree Celcius , OUTLET TEMP: 65 Degree Celcius. Referemcwe Model Series. 44 1.5 kW, Type: 33- DKEK, Length is 1000 mm and Height is 600 mm of Radiator. 45 2.5 kW, Type: 33- DKEK, Length is 1000 mm and Height is 600 mm of Radiator. 46 3.5 kW,Type: 33- DKEK, Length is 1600 mm and Height is 600 mm of Radiator. 47 5 kW,Type: 33- DKEK, Length is 1600 mm and Height is 900 mm of Radiator. 48 5 kW,Type: 33- DKEK, Length is 2000 mm and Height is 600 mm of Radiator 49 M & L for Pre-insulated MS pipe,Class C havingminimum thicknes of PUF insulation as mentioned below and of density 36 Kg/Cum and 26 gauge AL cladding complete suitable for above ground as per sizes shown.The pipes should be insulated with closed cell puf of density 36±2 Kg/Cum of below mentioned thickness. The Pipe should be workable in the temp. range of-50 Degree Celciusto120 Degreec Celcius. Note:-The Pipes size 150mm & below shall be M.S. ‘C’ class as per IS : 1239 50 80 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 51 65 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 52 50 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 53 40 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 54 20 mm with 36 mm PUF thicknes and 26 Gauge Al Cladding. 55 Buried under ground/Exposed to Ambient:80 mm with 50 mm PUF thicknes and HDPE Cladding, 26 Gauge Al Cladding. 56 Cabel Tray :-Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling/Ground/wall with M.S. suspenders as per IS code including bolts & nuts, painting suspenders etc. as required of size 150 mm width X 50 mm depth X 1.6 mm thickness 57 Supplying, fixing, testing and commissioning of following diameter valves (PN-16 Rating) (Complete with Flanges integral or welded, fittings, Nuts, Bolts & Gaskets (PN-16 Rating), strainers (Complete with flanges integral or welded, fittings, Nuts, Bolts & Gaskets (PN-16 Rating), gauges etc for condenser water circulation as per specifications. Insulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as specified. Butterfly Valve ( Insulated Valves) with CI body SS disc nitrile sheet & O ring, Complete with fittings, Nuts, Bolts & Gaskets.Butterfly Valve ( Insulated Valves) with CI body SS disc nitrile sheet & O ring, Complete with fittings, Nuts, Bolts & Gaskets. 58 80 mm dia Butterfly Valve 59 65 mm dia Butterfly Valve 60 50 mm dia Butterfly Valve 61 Supplying, fixing, testing and commissioning of Y-STRAINER (Insulated Valves) of Ductile CI Body flanged ends with stainless steel strainer forhot water circulation including Insulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as specified of size 50 mm dia Y strainer. 62 Supplying, fixing, testing and commissioning of NON - RETURN VALVE (Insulated Valves) with duel plate of CI body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating forhot water circulation includingInsulation thickness ofvalves should be equal to the Insulation of PUF and GI Cladding of Pipe Section as sepcified of size 50 mm dia NRV. 63 Supplying, fixing, testing and commissioning of Automatic Air Purge Valves forhot water circulation headeras specified of size Automtic Air Purge Valve 20 mm dia. 64 Supplying, fixing, testing and commissioning of Air Separator compleate allas specified of size 50 mm dia. 65 Supplying, fixing, testing and commissioning of water pressure gauge (100 mm dia) bourdon type with brass ball valve of 3/8 dia and SS tubing, socket.Range (0-50) / (0-100) as required by Engineer In Charge. 66 Supplying, fixing, testing and commissioning of Mercury in glass industrial thermometer in SS-304 casing with 0.5 C least count, range 0-50 C. Brass oil filled thermowell of 1/2 size as required by Engineer In Charge. 67 Electrical distribution Panel Supply, installation, commissioning and testing of factory made, CHS Plant, indoor type made out of CRCA sheet 2 mm thick, frame factory fabricated with front and back openable double door with locking arrangement, with MS angle section 50x50x6 mm support, duly powder coated painting having thickness not less than 100 microns provided suitable gasket to make it dust and vermin proof, suitable for 3 Phase4 wire, 415 Volts, 50 Hz, AC supply system, floor mounted and grounting the legs of panel in PCC foundation 1:4:8 complete as all directed suitable for and including the following :- 68 INCOMERS(i) Bus Bar TPN Al extensible type main bus bars of minimum of 600 A capacity (As per capacity of corresponding incoming / Bus couplers) , and auxilliary bus bars ofsuitable capacity with heat shrunk coloured sleeves and i/c SMC bus bars supports at required intervals complete for cross section, size supports & their spacing etc. for withstanding fault level of50kA .(ii)MCCB 400 Amps, 415 Volt, 36 KA, 4 Pole,Microprocessor release- 01 No for incoming (Extended Rotary Operating Handle, Phase Spreader links and Phase barriers ) Make: Legrand/Schenider/SimensOUTGOINGS(i) 3Nos- 125A ,25 KA TPNMCCB/ACBwith Microprocessor release (3# Hot Water Generator)(ii) MCB 10 Amp,TPN,10KA, C curve - 06, 3 Nos for Pumps , 2 Nos for Pumps ,01 Nos for glycol transfer pump(iii) LED Phase indication lamps (01 Set) with 2Amp back up MCB,Breaker ON/OFF indicating light with 2A MCB, test terminal block set, circuits as per standard practice, auxiliary contacts for positive interlocking of the breakers as required. - 2 Set (iv) Digital Ammeter with in built ASS,metering C.T.sCAST RESIN type, 15VA, and accuracy class-1of 800/5A for measuring current in each phase - 01 Set.(v) All accessories prewired with appropriate size copper strip or wire and thimbles etc. all as required including foundations as per Manufacturers recommendations all as directed by Engnr-in-Charge.Note : Contractor will submit the drawing for approval of panel to GE before execution. 69 LT CABLES : Supply & Laying/ fixing of following size XLPE insulated and PVC sheathed AI conductor armoured cable/unarmoured as required of 1.1 KV grade complete as require (ISI Marked) (in ground/in pipe/in duct/on surface/on cable tray)Note for 49.01 to 49.04 :- Cable shal withstand temperature variation (-) 35 °C to (+) 35 °C at appx 3500 mtr above sea level. 70 3.5 Core x 70 sq.mm. (Electric Hot Water Generator) 71 4.0 Core x 10 sq.mm. (Pump) and (Pressurization Unit) 72 2 Core x 10 sq.mm. (Pump) 73 2 Core x 6 sq.mm (Pressurization Unit) 74 Earthing complete with Copperearth plate electrode of size 60cm X 60cm X 6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides by 15 cm thick and packed layer of charcoal dust and common salt filling in alternate layers etc and connected to and including Copper strip of size 32x6 mm up to 7.5 mtr by means of bolts, nuts, check nuts and washers made of brass and protected by light grade 40mm dia upto 7.5 mtr long GI pipe connected to main controlboard and GI pipe light grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover 50mm thick and PCC chamber pit with PCC 1:2:4 type C2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing making test point and testing after completion all as specified and shown on plate No 3 of SSR Part-I 2009 complete all as specified & directed by Engr-in-charge 75 S&F rubber matting conforming to IS-15652-2006 complete as required. of size2m x 1m x 25 mm 76 Glycol - Water SolutionSupplying of Ethylene glycol concentrate along with the necessary additives and inhibitor in cognition in sealed barrels complete all as directed.NOTE;- (i) The glycol concentrate shall be mixed with potable water supplied by contractor and filled in central heating system pipe line after proper leak test of entire circuit. The glycol water mixture ratio shall be 45 : 55 and freezing temperature shall be - 45 Degree Celcius (ii) First charge of glycol is included in the quoted rate. First Charge Include Charge in CHS pipe lineStorage Tank. (Glycol 45 % ,Water 55 %) 77 For CHS 78 Supply of Gycol for running of Plant for 12 months 79 GLYCOL CIRCULATING PUMP: Supply, Erection, Testing and Commissioning ofTransfer pumps for the capacity of 5 LPM 5 meter head for Glycol Fluidtransfer with base frame foundation, bolts coupling coupling guard,TEFC, (OEM design HP for the required Flowand Head ) andother accessories for proper function of the pump. 80 OXYGEN GAS MANIFOLD : Supply , installation , testing and commission 4+4 oxygen manifold with middle frame, tail pipe, NRV and ESSAB make 10x14 regulator complete all as specified and directed by Engr in charge . 81 Supply, installation , testing and commission 3 cylinder emergency inlet for oxygen complete all as specified and directed by Engr in charge . 82 Supply , installation , testing and commission automatic control panel with Analog Display 02 for oxygen complete all as specified and directed by Engr in charge. 83 S&F of copper tubing of size 15 mm OD, EN -13348 Grade , 0.9 mm wall thickness including proper saddling , clamping and insertion of branches connections including all fitting for medical use, complete all as specified and directed by Engr in charge. 84 S&F of copper tubing of size 12 mm OD, EN -13348 Grade , 0.9 mm wall thickness including proper saddling , clamping and insertion of branches connections including all fitting for medical use, complete all as specified and directed by Engr in charge. 85 S&F BS type gas outle with probe for oxygen for medical compleate all as specified and directed by Engr in charge 86 S&F 1/2 Brass ball valve with end fittings including all fittings for medical usecomplete all as specified and directed by Engr in charge. 87 S&F BPC flow meter (0-15 LPM) including humidfire bottle complete all as specified and directed by Engr in charge . 88 S&F 3/8 Brass ball valveincluding all fittings for complete all as specified and directed by Engr in charge. 89 STAND BY DG SET : Supply,install, test and commissioning of silent Diesel Engine Generating set 415 volts, 3 phase, 4 wireengine as per IS08528 conforming to CPCB Norms IV, and alternator as per IS08528 of capacity 400 KVA at NTP with control panel having meters, sound proof canopy etc with foundation (As per OEM design) including all accessories as per manufactures standard and as per the details given below and independent relay panel for automatic on mains failure:- AC Generator should be suitable for ambient conditions at nimu Leh area. 90 (A) Alternator : Standard design alternator rated at 400 KVA (320KW)net output at power factor 0.8, AC, 3 phase 4 wire, 415 V, 50 Cycles/Second, 1500 RPM self excited, self regulated, screen protected, drip proof IP 23 enclosure, brush less design, voltage regulation ± 2.5 % rated voltage from no load to full load and frequency regulation within ± 1.5 % tolerence. (B)DIESEL ENGINE : Vertical diesel engine of suitable capacity, closed circuit as per BS-649 or IS-1002 direct injection type, Electric starting system having rated speed 1500 RPM. The DG set Shall be capable for running with 10% over loading for 01 hour in every 12 hours as perBS-5514/BS-649. Engine shall be multi cylinder, multi stroke, direct injection andequipped with all standard fitting as per manufactures recommendations and mounted on common base frame with following Specifications.(a) Fly wheel with housing (i) Common base frame of sturdy design suitable for anti vibration mounting and permanent concrete foundation for mounting engine and alternator as per manufacturers instructions (b) Cooling system (i) Radiator with fan & belts & guard, rubber hoses and thermostat. (ii) Cooling water pump centrifugal type . 91 (c) GOVERNER : Electronic Governer (d) ELECTRIC STARTING SYSTEM : Electric Self starter , 24 volts DC(12 volt, 150 AH battery 2 Nos)charging alternatoraspermanufacturers design,copper leads with lugs of adequate size complete with initial charging of maintenance free battery 2X12 volt 150 AH capacity. (e) GENERATOR MONITORING PANEL : Comprising of following :- (i) Microprocessor based genset controller for metering, monitoring, governing and protection. (ii) Engine protection for low lub oil pressure, high coolant temperature (alarm & shutdown) (iii) Alternator protection parameters like under voltage, over current, under frequency, over frequency (alarm & shut down) (f) ACCESSORIES:AVM Pads built or separately mounted to manufacturer base frames. (g) COUPLING ARRANGEMENTS: Fixed coupling, flywheel to suit fixed coupling and fly wheel housing.(h) EXHAUST SYSTEM : should have equipped with emission control device as per latest Govt norms. Silencer complete with exhaust pipe of suitable size upto and out side the building all covered with asbestos rope of suitable size all as specified and as directed.(j) FUEL TANK: Daily service fuel tank of capacity suitable for 8 hours continuous operation made out of 3 mm thick (heat retardant) sheet with indicating gauge, built inside the acoustic enclosures or as per manufacturers design 92 (C)ACOUSTIC ENCLOSURE : All as per CPCB norms IV and OEM of DG Sets design.(D)AMF Panel : Supply, install, testing and commissioning of AMF Panel outdoor type, cubical body,dust and vermin proofmade up of CRCA sheet painted with two coats of synthetic enamelled paint over a coat of red oxide primer confirming to IP 45 with front and rear opening with louvers andmounted on floor with PCC pedestal pillars with a clearance of atleast 0.3 m above ground level with glands sockets etc with provision of cable entry from bottom all pre wired and connected complete with following accessories:-(i) Microprocessor based Panel -01 No(ii) Power Contactor heavy duty suitable for generator and mains (iii) Over load relay for genset (iv) Suitable rating isolating switch MCCB for both DG & main supply.(v) Multi functioning meter to indicate voltage, current, frequency, P F, KW & KWH etc (vi) Emergency stop push button.(vii)Set of indicaters : - (a)Low lube oil pressure (b) DG Set over load(viii) Push button to start, stop (ix) Mode selector switch i.e Auto/Manual/Test/ OFF.(x) Set of Instrument fuse (xi)Set of aluminium bus bar of 600 Amps capacity 3 ph, 4 Wire system (xii) Automatic battery charging unit with DC voltmeter, Ammeter and selector switch for trickle/ Boost charging.(xiii) By Pass arrangement of main supply when AMF circuit fail due to any fault with provision of suitable rating change overs and switches. 93 The following items are deemed to be included in the rate quoted for all DG sets:- (i) DHPP for testing purpose shall be supplied by the contractor without any extra cost to Department. (ii)The contractor shall arrange for artificial load (water load/Electrical load) for testing for final testing of DG Set at site and the cost is deemed to be including in above offer. (iii) Testing of sound level should carried out at the site in presence of Engineer-in-Charge(iv) One set of latest Spare part catalogue with price, exploded view of parts and users manual are deemed to be included in the quoted rate.(v) All civil works including foundation for DGSet as per manufacturers drawing/ specification, foundation for AMF panel shall deemed to be included in the quoted rate.(vi) The rate quoted is deemed to be included for initial filling of radiator coolant and lubricating oil upto level.
Contract Date: May 29, 2026 Contract Value : ₹ 5.74 Crore
Statutory Bodies & Commissions/Committees No of Bidders 3
Ladakh View Result →
14.
Housing Urban and Rular Development #11175653 Technical Bid
development of landscaping work of tower of justice in district gurugram (installation of automatic pop up irrigation system) , hsr item 26.71.1-supply and installation of pop up sprinklers 1. pop up impact rotors 3/4 inlet and radius ranging from 7- 12 m with interchangeable nozzles with check valve and all accessories complete as per bis standard specifications and setting flow rate as directed. , hsr item 26.71.3-supply and installation of pop up sprinklers 3. pop up spray heads 1/2 inlet and radius ranging from 3-5 m with interchangeable nozzles and all accessories complete as per bis standards and setting flow rate as directed with pop up having moulded wiper seal moulded into cap , hsr item 26.69.8-supply and installation of inline drip irrigation 8. ldpe emitting pipe 16 mm; class 2 (0.3 m x 1 to 4 lph), complete with all accessories as per bis standard specifications , hsr item 26.70.1-supply and installation of drip irrigation lines with external emitters/ micro-sprinklers/bubblers 1. ldpe lateral pipe 16 mm; class 2 2.5 kg/cm2, complete with all accessories as per bis standard specifications , hsr item 26.70.2-supply and installation of drip irrigation lines with external emitters/ micro-sprinklers/bubblers 2. installation of pressure compensating drip emitters complete with all accessories as per bis standard specifications , hsr item 26.73.1-supply and installation of filters/ pressure relief valve for drip/ sprinkler system 1. sand/media filter 25 cum/hr, with back wash and by pass assembly made in mild steel body as per b is standard. , hsr item 26.73.9-supply and installation of filters/ pressure relief valve for drip/ sprinkler system 9. hydro cyclone/ sand separator 20-40 cum/hr, with flush valve, ss clamp, bsp thread cone, oring, with ss lock pin and collector tank as per b is standard. , hsr item 26.73.6-supply and installation of filters/ pressure relief valve for drip/ sprinkler system 6. disc filter 50 cum/hr, with flush valve size 38mm inlet with disc clean element strong precision engineered and radially grooved disc to provide three dimensional filter as per b is standard , hsr item 26.73.10-supply and installation of filters/ pressure relief valve for drip/ sprinkler system 10. supply and installation of 50mm i/d hydraulic pressure relief valve of polemeride with accessories for pressure regulation of irrigation system as per b is standard. 0.00 0.00 , hsr item 22.182-providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to isi : 12701, colour of opaque white or as approved by engineer-in-charge. the rate includes making necessary holes for inlet, outlet and over flow pipes. the base support i/c fittings and fixtures for tank shall be paid separately. , hsr item 4.19.1.1-excavating trenches of required width for pipes, cables, etc, including excavation for sockets, depth up to 1.5 m, including getting out the excavated materials, returning the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layers by ramming, watering etc., stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50 m : 1.1. ordinary rock : pipes, cables etc. not exceeding 80 mm dia , hsr item 5.23.2-demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 2. nominal concrete 1:2:4 or leaner mix (i/c equivalent design mix) , hsr item 4.8.1-earth work in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and topmost layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead up to 50 m and lift up to 1.5 m : 1. all kinds of soil , hsr item 7.22.2-brick work with common burnt clay nonmodular bricks of class designation 10.5 in superstructure above plinth level up to floor iv level in all shapes and sizes in : 2. cement mortar 1:6 (1 cement : 6 coarse sand , hsr item 6.1.4-providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work below plinth level and up to floor iv level: 4. 1:3:6 (1 cement : 3 coarse sand (zone-iii) : 6 graded stone aggregate 20 mm nominal size) , hsr item 11.10.1-20 mm cement plaster of mix : 1. 1:4 (1 cement: 4 coarse sand) , ns item -supply,fixing and commissioning of astm upvc pipe 2` sch-40 make ashirvad /astral/vectus , ns item -supply,fixing and commissioning of astm upvc pipe 1.5` sch-40 make ashirvad /astral/vectus , ns item -supply,fixing and commissioning of astm upvc pipe 1` sch-40 make ashirvad /astral/vectus. , ns item -supply,fixing and commissioning of astm upvc pipe 3/4` sch-40 make ashirvad /astral/vectus , ns item -supply,fixing and commissioning of quick coupling keys complete with g.i elbow complete make automat , ns item -supply,fixing and commissioning of hdpe valve boxes 160mm with screw down type covers, of following sizes and shape, including excavation and filling of pea gravel in 100 mm deep layer at bottoms, all as per standared detail ( for qrcv, valves etc.) make: rain bird / dwc / cepex , ns item -supply,fixing and commissioning of pvc ball valves 1` - make astore/gf/jain/harit. , ns item -supply,fixing and commissioning of pvc ball valves 1.5` - make astore/gf/jain/harit , ns item -supply,fixing and commissioning of pvc ball valves 2` - make astore/gf/jain/harit. , ns item -supply,fixing and commissioning of air release valve kinetic type 1` - make: bermad/ari/rain bird. , ns item -supply,fixing and commissioning of raingun 1.25` make - automat/ harit . , ns item -supply,fixing and commissioning of 10` round valve box with cover make: rain bird / dwc /jain cepex , ns item -supply,fixing and commissioning of ms with powder coated filter support for filter make arya steel. , ns item -supply,fixing and commissioning of (monoblock/openwell submersible) pumpset of having discharge 5 lps@ 40 mtr head etc. item complete. make kilosker/lubi , ns item -supply,fixing and commissioning of c- section base farme for pump with cover powder coated make arya steel. , ns item -providing, laying, jointing, testing, and commissioning of 4 sq mm 4 core copper cable. isi mask, make - finolex , ns item -supply,fixing and commissioning of panel suitable for pumpset having outdoor type panel box and fixed alongwith following accessories starter ,start / stop push buttons , ammeter, voltmeter , indicating lamps, mcb , with cable, auto manual relay etc. item complete. make bch/landt. , ns item -supply,fixing and commissioning of 150 pga solenoid globe valves with fabric reinforced diaphram and rugged pvc construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4bar and,max water temp. upto 42degree centigrade, with 24ac solenoid,current rating 0.41a @60hz,coil resistance 30ohm with provision to attach prs-dial make: rain bird / bermad / toro. , ns item -supply,fixing and commissioning of 100 pga solenoid globe valves with fabric reinforced diaphram and rugged pvc construction ,compatible and slow closing to prevent water hammer,pressure rating upto 10.4bar and max water temp. upto 42degree centigrade, with 24ac solenoid,current rating 0.41a @60hz,coil resistance 30ohm with provision to attach prs-dial make: rain bird / bermad / toro.. , ns item -supply,fixing and commissioning of esp me3 22 station modular controller uv resistant basic 8 station and expandable upto 48stations,wall mount case,with lcd display ,non volatile memory for 100years,10kv surge protectionwith removable front panel and programmable under battery in office,and flow watch options to shutdown system if any damage or excess flow or dry run shutdown,cycle plus soak,raindelay,station delay ,alarm light ,electronic diagnostic circuit breaker ,program summary and review,wiring test,,4programm and 8start time per program with adjustable delay between stations,slow closing valve, removable battery,and sensor terminals make: rain bird / bermad / galcon /hunter.. , ns item -supply,fixing and commissioning of direct burial connector for cable joint make: paige / 3m / rain bird. , ns item -supply,fixing and commissioning of 18 awg cable with high molecular weight polyethelene and applications upto 600volts , temperature upto -55 to plus 60 deg centigrade ,soft drawn bare copper meeting astm b3, tensile strenth 1400psi for two way communication betwee nsolenoid valvel and controller make: rain bird / paige.. , ns item -supply,fixing and commissioning of voltage stabilizer make: rain bird / v guard.. , ns item -supply,fixing and commissioning of powder coated encloser box for automation controller make arya steel.. , ns item -supply,fixing and commissioning of condiut pipe for cable ducting 25mm make polypack or equivalent.. , `ns item -supply,fixing and commissioning of 12` rectangular valve box with cover make: rain bird /jain/dwc / cepex.. , ns item -supply,fixing and commissioning of hdpe pipe isi 40mm odpe 80 pn 6 , ns item -supply,fixing and commissioning of 3/4` dia inlet quick release coupling valve of almunium , complete with lid, preassembled triple swing joint in pvc, gi support rod with ss hose clamps all complete as per standard detail including making connections with main supply line. make automat , ns item -supply,fixing and commissioning of pp clamp saddles with metal protection ring 63mm x 1` makeelitech/astore / gf , ns item -supply,fixing and commissioning of hdpe dwc pipe isi sn 8 110mm od-for road crossing. , ns item -supply,fixing and commissioning of hdpe pipe isi 63mm od pe 100 pn 6 , ns item -supply,fixing and commissioning of hdpe pipe isi 50mm od- pe 100 pn 6
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Haryana View Result →
15.
Communications and Information Technology  #11124557 AOC
Bids Are invited for Supply of 1.5TR copper coil evaporator and copper coil condenser Inverter Split AC units - Supplying of BEE approved 1.5 Ton BIS certified wall mounting type Inverter -Variable speed- Split Air Conditioning unit confirming to IS 1391 Part-2 having rated cooling Capacity greater than or equal to 5200 watts Rated Indian Seasonal Energy Efficient Ratio -ISEER- Wh by Wh greater than or equal to 5.20 with copper Evaporator and copper Condenser coil Rotary compressor suitable for operation on single phase 230 V plus or minus 10 percentage 50 Hz AC supply as per IS 1391 part-2 latest and ISO 14000 duly filled with ecofriendly refrigerant gas R32 or Equivalent with remote handset standard lengths of copper refrigerant pipes and foam insulation and drain pipe and interconnection cable and remote hand set with batteries etc. and reusable type synthetic fiber air filter for indoor unit including all features as per the detailed specifications. The OEM Warranty of AC Machine should be 1 Year on machine and 4 years additional warranty on PCBs and 9 Years additional warranty on Compressor. , Installation Testing and Commissioning of 1.5 TR Inverter Split Air conditioning units - Installation and testing and commissioning of 1.5 Ton or 2.0 Ton Inverter Split A.C. Unit and mounting or fixing of indoor and outdoor unit and fixing of refrigerant piping with expanded polythene foam insulation suitable size PVC pipe in wall crossings and laying of cable for interconnections and laying drain pipe of standard length which is supply along with AC unit minor civil work including making holes on wall for laying refrigerant pipe lines and control cable and drain pipes and closing the extra openings and making good the damages etc. as reqd. , Providing and fixing of suitable size L- shaped powder coated MS bracket - Providing and fixing of suitable size L- shaped powder coated MS bracket -2 nos. per set- on wall with suitable size anchor bolts for fixing of the outdoor unit of the split AC units including drilling holes etc. complete as reqd. , Providing and laying of additional refrigerant copper pipes for suction and discharge lines of Split AC units - Providing and laying of additional refrigerant copper pipe for suction and discharge lines -size not less than one by four inches and half inches dia or as recommended by the manufacturer along with expanded polythene foam insulation including cutting and brazing and making joint etc as reqd. The measurement shall be taken on linear basis for one circuit which includes suction and discharge line and foam insulation. , Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable - Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable for inter connection of indoor and outdoor units of ACs etc as reqd. , Providing and laying of additional drain pipe of size 20mm dia - Providing and laying of additional drain pipe of size 20mm dia PVC braided or solid medium class ISI marked along with all accessories and fixing on surface of wall with PVC saddles if required suitable for drainage of condensate water etc. as reqd. , Providing of additional R32 refrigerant gas - Providing of additional R32 refrigerant gas if required and charging into the Inverter Split AC unit etc. as reqd. , Supply and Fixing of MCB protected 3 pin socket outlet boxes - Supply and Fixing of MCB protected 3 pin socket outlet boxes with metal board consisting of 1 no 20 Amps 3 pin socket outlet with 20 Amps plug top and 1 no 20 or25 amps SP MCB of C series suitable for 220-230 volts single phase 50 Hz AC supply as required. , Dismantling the existing old and life expired and faulty WAC units along with Accessories - Dismantling the existing old and life expired and faulty WAC units along with Accessories and other unwanted electrical boxes conduits angle iron frames as required. , Closing the wall openings for Window AC units - Closing the wall openings for Window AC units after removing the wooden or aluminium frame if any with 10 inches or 15 inches thick brick wall matching with original thickness by cement bricks inccluding plastering etc. complete as required. Total Quantity : 129
Contract Date: Ref. Documents Contract Value : ₹ 3.58 Lakh
Government Departments No of Bidders 3
Odisha View Result →
16.
Communications and Information Technology  #11124552 AOC
Bids Are invited for Supply of 1.5TR copper coil evaporator and copper coil condenser Inverter Split AC units - Supplying of BEE approved 1.5 Ton BIS certified wall mounting type Inverter -Variable speed- Split Air Conditioning unit confirming to IS 1391 Part-2 having rated cooling Capacity greater than or equal to 5200 watts Rated Indian Seasonal Energy Efficient Ratio -ISEER- Wh by Wh greater than or equal to 5.20 with copper Evaporator and copper Condenser coil Rotary compressor suitable for operation on single phase 230 V plus or minus 10 percentage 50 Hz AC supply as per IS 1391 part-2 latest and ISO 14000 duly filled with ecofriendly refrigerant gas R32 or Equivalent with remote handset standard lengths of copper refrigerant pipes and foam insulation and drain pipe and interconnection cable and remote hand set with batteries etc. and reusable type synthetic fiber air filter for indoor unit including all features as per the detailed specifications. The OEM Warranty of AC Machine should be 1 Year on machine and 4 years additional warranty on PCBs and 9 Years additional warranty on Compressor. , Installation Testing and Commissioning of 1.5 TR Inverter Split Air conditioning units - Installation and testing and commissioning of 1.5 Ton or 2.0 Ton Inverter Split A.C. Unit and mounting or fixing of indoor and outdoor unit and fixing of refrigerant piping with expanded polythene foam insulation suitable size PVC pipe in wall crossings and laying of cable for interconnections and laying drain pipe of standard length which is supply along with AC unit minor civil work including making holes on wall for laying refrigerant pipe lines and control cable and drain pipes and closing the extra openings and making good the damages etc. as reqd. , Providing and fixing of suitable size L- shaped powder coated MS bracket - Providing and fixing of suitable size L- shaped powder coated MS bracket -2 nos. per set- on wall with suitable size anchor bolts for fixing of the outdoor unit of the split AC units including drilling holes etc. complete as reqd. , Providing and laying of additional refrigerant copper pipes for suction and discharge lines of Split AC units - Providing and laying of additional refrigerant copper pipe for suction and discharge lines -size not less than one by four inches and half inches dia or as recommended by the manufacturer along with expanded polythene foam insulation including cutting and brazing and making joint etc as reqd. The measurement shall be taken on linear basis for one circuit which includes suction and discharge line and foam insulation. , Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable - Supplying and laying of 4 core 2.5sqmm size PVC insulated and PVC sheathed copper conductor cable for inter connection of indoor and outdoor units of ACs etc as reqd. , Providing and laying of additional drain pipe of size 20mm dia - Providing and laying of additional drain pipe of size 20mm dia PVC braided or solid medium class ISI marked along with all accessories and fixing on surface of wall with PVC saddles if required suitable for drainage of condensate water etc. as reqd. , Providing of additional R32 refrigerant gas - Providing of additional R32 refrigerant gas if required and charging into the Inverter Split AC unit etc. as reqd. , Supply and Fixing of MCB protected 3 pin socket outlet boxes - Supply and Fixing of MCB protected 3 pin socket outlet boxes with metal board consisting of 1 no 20 Amps 3 pin socket outlet with 20 Amps plug top and 1 no 20 or25 amps SP MCB of C series suitable for 220-230 volts single phase 50 Hz AC supply as required. Total Quantity : 69
Contract Date: Ref. Documents Contract Value : ₹ 5.14 Lakh
Government Departments No of Bidders 2
Odisha View Result →
17.
Drinking Water Supply and Sanitation #11117952 Price Bid
Tender for Excavation By Mechanical Means(Jcb Or Hydraulic Excavator) In Trenches For Pipe Lines With Straight Or Open Cutting In Streets Or Open Area Including And Dressing Sides Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling Consolidation, Including The Cost Of , Diversion For Traffic, Crossing Over Trenches For Access To The Houses, Watching, Fencing, Etc. And Removal Of Surplus Soil Out Side/Inside The Town Involving Lead Upto 15 Meter Complete In All Respect. , Earth Work In Excavation In Foundations Trenches Etc. In All Kinds Of Soil Where Pick-Jumper Work Is Not Involved And Not Exceeding 2.0 Metres Depth Including Dressing Of Bottom And Sides Of Trenches, Stacking The Excavated Soil Clear From The Edge Of Excavation And Subsequent Filling Around Masonry In 15 Cm, Layers With Compaction Including Disposal Of All Surplus Soil As Directed Within Lead Of 30 Metres. , Providing And Filling Sand Grading As Per Specifications Or Fine Grade Around The Various Sizes Of G.I. Pipes In External Work. , First Class Burnt Brick Work Laid In Cement Sand Mortar 1:6 In Foundation And Plinth , 10 Mm Thick Cement Plaster With Cement Mortar 1:4 On Side Walls , 10 Mm Thick Cement Plaster With Cement Mortar 1:4 On Floors (Bed & Top Of Side Walls) , Providing Orange Colour Safety Footrest Of Minimum 6Mm Thick Plastic Encapsulated As Per Is:10910 On 12Mm Dia Steel Bar Confirming To Is: 1786 Having Minimun Cross Section As 23Mm X 25Mm And Over All Minimum Length 263Mm And Width As 165Mm With Minimum 112Mm Space Between Protruted Legs Having 2Mm Tread On Top Surface By Ribbing Or Chequering Besides Necessary And Adequate Anchoring Projections On Tail Length On 138 Mm As Per Standard Drawing And Suitable To With Stand The Bend Test And Chemical Resistance Test As Per Specification And Having Manufacturers Permanent Identification Mark To Be Visible Even After Fixing, Including Fixing In Manholes With 230X150x75cm Cement Concrete Block 1:2:4 (1 Cement: 2 Sand: 4 Stone Aggragate) Complete As Per Design. , Providing & Fixing Single Air Valve Isi Marked As Per Is-14845 Including Jointing All Carriages Complete (D) C.I Single Air Valve Screwed(Size 50Mm) , Providing And Laying, Jointing, Fixing, Testing Isi Marked G.I. Pipe (As Per Is 1239) Bclass, Including Cost Of Specials Such As Tees, Bends, Sockets Elbow Etc., Cutting, Threading And Testing In Trenches In The Ground Complete. (F) 50Mm Internal Diameter. , Construction Of Masonary Sluice Valve Chamber Excluding Sluice Valve Cover As Per Standard Design & Drawings Of Public Health Department. Size 0.6 M. X 0.6 M. Complete In All Respect. , Construction Of Masonary Sluice Valve Chamber Excluding Sluice Valve Cover As Per Standard Design & Drawings Of Public Health Department. Size 0.9 M. X 0.9 M. Complete In All Respect. , Cold Twisted Detormed (Ribbed/ Tor Steel) Bars (Fe 550 Grade As Per Is 1786-2008) , For Reinforced Cement Concrete Works, Where Not Including In The Complete Rate Of Reinforced Cement Concrete Including Binding, Bending And Placing In Position Complete , Shuttering For Faces Of Concrete Foundations And Foundation Beam & Plinth Beam (Vertical Or Battering) , Cement Conc.1:4:8 With Brick Balast 40Mm Gauge Mixing By Manual Means , Cement Conc.1:2:4 With Stone Ballast Or Shingle Mixing By Manual Means , Reinforced Cement Concrete Work Hand Mixed 1:2:4 For Slab Excluding Steel Reinforcement Up To 80 Kg Per Cum , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 300Mm I/D Pipe (For Pucca Road Crossing) , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 350Mm I/D Pipe (For Pucca Road Crossing) , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 400Mm I/D Pipe (For Pucca Road Crossing) , Providing, Lowering In Trenches To Correct Gradient And Alignment, Jointing With Tyton Rubber Joint And Cutting Of Reinforced Cement Concrete Spigot And Socketed Pipes And Specials With Rubber Ring Isi Marekd As Per Is Code Is 458-2003 Into Trenches For All Depths And Laying Out The Same To Correct Alignment, Gradients, Levels Etc. Cutting Of Concrete Beds And Joints Holes, Supporting The Pipes And Specials In Correct Position In A Suitable Rigid Manner While The Same Are Being Jointed And Until The Surrounding Benchings, Haunches And Envelopes Are Completed. The Pipes Shall Rest On The Beds At All Joints Through Their Lengths And Fixing Of Rubber Ring, Facing, Testing The Pipes For Leakage And Making Good The Same Leakage And All Defects To The Entire Satisfaction Of The Engineer-In-Charge Including All Cartage Etc. Reinforced Cement Concrete Pipe Np -2 450Mm I/D Pipe (For Pucca Road Crossing) , Providing And Fixing Of Alfa Valve Of 140 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 150 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 160 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 180 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 200 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 225 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 250 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 300 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 350 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 400 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Providing And Fixing Of Alfa Valve Of 450 Mm Dia Complete With Antitheft Mechanism Including All Tax And Charges. , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 140 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 160 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 180 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 200 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 225 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Laying , Fixing, Jointing And Testing Of P.V.C. Pipes As Per Isi-4985 (Isi Marked With The Prior Approval Of Engineer-In-Charge) Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointing And Testing Complete As Per Specifications 250 Mm O/D Pvc Pipe Of 2.5 Kgf. / Sqcm , Providing & Fixing 140 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Equal Tee (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Short Or Long Bend (90 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Short Or Long Bend (45 Degree)(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Dia. Socket (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 X 50 Mm Dia. Ms Service Saddle (6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 140 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 160 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 180 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 225 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 Mm Tail End Point 6Kg With M.S./C.I. Flange(6 Kg/Cm2 Pressure) Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 250 X 225 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 200 X 180 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 150 X 160 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing 150 X 140 Mm Dia. Reducer (6 Kg/Cm2 Pressure) For Sluice Valve Conforming To Is Codes With Latest Amendments If Any At Site Of Work Including Loading, Unloading And Rehandling If Any Complete In All Respects As Per Design And P.W.D. Specifications And Instructions Of Engineer In Charge. , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 150 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 200 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 250 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 300 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 350 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 400 Mm I/D Sluice Valves Flanged , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer Incharge)(A) Class Pn-1 As Per Isi (C) 450 Mm I/D Sluice Valves Flanged , Provision For Restoration Of Branches/Sub-Branches Of Watercourses. , Wrought Iron And Mild Steel Ladders, Framed Grills, Grating Etc. Complete Fixed In Position In D-Tank. , Supply Of M.S Isa,Ismc,Ismb, Plate Etc , Welding By Gas Or By Electric Plant, Including Carriage To And From Workshop , Providing And Laying,Jointing,Fixing,Testing Isi Marked Gi Pipe B-Class, Including Cost Of Specials Such As Tees,Bends,Sockets,Elbow Etc, Cutting Threading And Testing In Trenches In The Ground Complete. (B) 20Mm Dia , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 150 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 200 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 250 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 300 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 350 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 400 Mm I/D Pipe. , Lowering Precast Concrete Np-2 Plain End Pipes And Collar With Reinforcement. In Trenches To Correct Gradient And Alignment,Cutting Of Reinforcement Cement Concrete Plain End Pipes,Stringing In Trenches,Jointing Ends And Fixing Collar With Cement Mortar 1:2 As Per Is 458:2003 Into Trenches For All Depths And Laying Out Same To Correct Alignment,Gradients,Levels Etc Complete In All Respect Reinforced Cement Concrete Np-2 450 Mm I/D Pipe. , Earthwork Undressed Involving An Avg. Horizontal Throw Upto 2 Mtr. And An Avg. Vertical Lift Upto 0.5 Mtr. Including Breaking Of Clods , Earthwork Undressed With Combined Lead Upto 15 Mtr. Including Breaking Of Clods. , Dressing Of Earthwork New Work Or Remodelling Of Earthwork , Excavation Of Soil Using Hyraulic Excavator And Hydraulic Tractor Trolly I/C Cutting And Loading In Trolly And Transporting To The Embankment Locations With All Lifts And Leads Excluding Royalty. , Re-Handling Of Earthwork Recently Executed , Earth Filling With Ordinary Soil In 15 Cm Layers Including, Ramming, Watering And Consolidating Lead Upto 30M , Dag-Belling With Single Kassi Stroke Minimum 7.5 Cm Depth. , Dressing Of Bed And Preparation Of Sub-Grade For Lining , Supplying And Fixing Of Reinforced Cement Concrete Shutter And Frames For Nakka And Branch Offtakes , Supplying & Laying Dry Brick Bats , Any Other Item
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Punjab View Result →
18.
Health and Family Welfare #11109582 AOC
Tender For supply of Cath Lab Consumables , Coronary Stents/ Scaffolds , Des, Everolimus,Fda Approved Platinum Chromium Platform , Des, Everolimus,Fda Approved Platinum Chromium Platform Poly-Vinylidene Fluoride-Hexafluoropropylene ( Pvdf-Hfp)Polymer , Des, Everolimus, Fda Approved Platinum Chromium Platform, Bioabsorbable Polymer Plga , Des, Everolimus, Fda Approved Cobalt Chromium Platform Stent Length Up 12 Mmto 38Mm , Des, Everolimus Hypotube Balloon Technology, Fda Approved Cobalt Chromium Platform Stent Length Up To 48Mm , Des, Everolimus, Fda Approved Cto Stent Cobalt Chromium Platform, Fluoropolymer ,2.25Mm-4.25Mm Diameter , Des, Everolimus, Only Dcgi Cobalt Chromium Platform, 50 Micron Strut Thickness , Des, Everolimus, Only Ce Approved Cobalt Chromium Platform With 55 To 70 Micron Strut , Des, Everolimus, Only Dcgi Cobalt Chromium Platform With 55 To 70 Micron Strut , Des, Everolimus, Only Dcgi Cobalt Chromium Platform , Des, Everolimus, Ce/Dcgi Approved With Length 8Mm To 52 Mm & Diameter Of 2.00 Mm To 4.50 Mm.Crest :6 Valley To Valley Connectors:2. Material : L605 Alloy (Cobalt Chromium). Design : Open Cell Strut Thickness : 60 Mm ± 10 ?M/ Strut Width : Struts: 65 ± 10 ?M Proximal Shaft Markers: 90 Cm & 100 Cm Nbp: 9 Atm / (Rbp): 16 Atm/ Rbp 14Atm (Se-Mkr)0.5Mm (At Both Sides, Proximal & Distal). , Des, Everolimus, Ce/Fda/Dcgi Approved Cobalt Chromiumbiodegradable Polymer, 60 Micron Strut With Dual Long Z Link Technology And Tetrinium Design With Cumilative Drug Release Technology:Length: 8,12,16,20,24,28,32,36,40,44,48, Sizes:2,2.25,2.5,2.75,3,3.5,4,4.5 , Des, Sirolimus, Ce/Fda/Dcgi Approved Cobalt Chromiumbiodegradable Polymer, 60 Micron Strut With Dual Long Z Link Technology And Tetrinium Design With Cumilative Drug Release Technology:Length: 8,12,16,20,24,28,32,36,40,44,48, Sizes:2,2.25,2.5,2.75,3,3.5,4,4.5 , Dcgi Approved Biodegradable Polymer Based Everolimus Eluting Coronary Stent System With Differencial Stent Architecture Of 6 Crown Design For 2 - 2.75 Mm , 8 Crown For 3-3.5 & 10 Crown Design For 4-4.5 Mm Length : 8 Mm ,13 Mm.16,19,24,29,32,37,40,44,48. Diameter : 2,2.25,2.5,2.75,3,3.5,4,4.5 , Dcgi Approved Des, Everolimus Stent Systum With Cobalt Chromium 65 Micron Strut Thickness Size: 2.25,2.5,2.75,3,3.5,4,4.5 Length: 8 To 48 Mm , Des , Evorolimus L 605 Cobalt Chromium, Biodegradable Polymer, Dcgi Approved, 60 Micron Struts With Open & Closed Design,3?M Coating Thickness Size 2.25 -5 Mm ,Length -8-48 Mm , Des, Everolimus, Only Dcgi Cobalt Chromium Platform, 63 Micron Strut Thickness , Des, Biolimus, Fda Approvedcobalt Chromium Platform , Des, Biolimus, Ce Approvedcobalt Chromium Platform , Des, Biolimus, Only Dcgi Approved Cobalt Chromium Platform,60 Micron Strut , Des, Zotarolimus, Fda Approved Cobalt Chromium Platform ,Polymer Type -Biolinx , Des, Zotarolimus, Ce Approved Cobalt Chromium Platform Polymer Type -Phosphorylcholine , Des, Zotarolimus, Only Dcgi Cobalt Chromium Platform Hydrophilic Polymer , Des, Zotarolimus Eluting Coronary Stent System With Core Wire And Continuous Sinsoid Technology, Cobalt Alloy, Platinum Iridium Core, , Des, Sirolimus, Fda Approved Cobalt Chromium Platform , Des,Serolimuseluting Ce Approved, Cobalt Chromium Stent , Des, Sirolimus, Only Dcgi Approved Cobalt Chromium Platform , Des, Sirolimus, Fda Approved Stainless Steel Platform , Des, Sirolimus, Ce Approved Stainless Steel Platform , Des, Sirolimus, Only Dcgi Approved Stainless Steel Platform , Des,Sirolimus , 65 Micron Strut , Hybrid Design With Proximal Main Branch Segment And Distal Tapered Side Branch Segment , Des,Sirolimus,Cobalt Chromium (Any Diameter / Any Length) , Ce Approved Biodegradable Polymer Based Sirolimus Eluting Coronary Stent System With Differencial Stent Architecture Of 6 Crown Design For 2 - 2.75 Mm , 8 Crown For 3-3.5 & 10 Crown Design For 4-4.5 Mm Length : 8 Mm ,13 Mm.16,19,24,29,32,37,40,44,48. Diameter : 2,2.25,2.5,2.75,3,3.5,4,4.5 , Tapered Des, Sirolimus Coronary Stent With Biodegradable Polymer , Stainless Steel Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer With Temperature Controlled Packing And Temperature Monitoring Device--Ce Approved , Polymer Free Dual Drug Sirolimus And Probucol Eluting Stent Technology With Microporous Surface Abluminal Coating And Shellac Resin With Diameters 2Mm-4Mm And Length 8Mm-48Mm- Dcgi Approve , Cobalt Chromium Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer -Ce Approved , Stainless Steel Abluminally Coated Sirolimus Eluting Coronary Stent With Microporous Surface & Low Biodegradable Polymer --Ce Approved , Abluminal Coated Everolimus Eluting Coronary Stent : Design : Open Cell , Strut Design : Open Cell With Valley To Valley S Connectots(V2vs) , Strut Width: Wavflo Struts : 65,, L605 Stent Material: Cobalt Chromium , Diameter : 2Mm-4.5 Mm , Length Available : 8Mm - 52 Mm , Des, Sirolimus, Ce Approved Stainless Steel Platform, Pbma / Peva Double Layer Polymer Coating For Optimal Drug Release Control,90 Days Drug Releasing. Flexible Stent Design ,.Large Opencells For Side Branch Access , Des, Sirolimus Ce/ Fda/ Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer,Strut 56-60Microns,:Length:8,12,16,20,24,28,32,36,40,44,48, Size: 2,2.25,2.5,2.75,3,3.5,4,4.5 , With Laser Cut Technology Seamless Tubing In A Serpentine Patern , Des, Sirolimus With Cumilative Drug Realese Technology, Ce/ Fda/ Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer Strut Thickness 56-60Microns Length:8,12,16,20,24,28,32,36,40,44,48,Sizes : 2,2.25,2.5,2.75,3,3.5,4,4.5 ,With Laser Cut Technology Seamless Tubing In A Serpentine Patern , Des Sirolimus,Cobalt Chromium L 605 Alloy,Biodergradable Polymer,Ce Approved,Varying Strut Width 85,70 &50 Microns,Size 2.25-4.5Mm Length 8-47Mm , Des, Sirolimus Ce/ Fda/ Dcgi Approved Cobalt Chromium Platform, Biodegradable Polymer, S-Link Strut 56-60Microns,Size:8,12,16,20,24,28,32,36,40,44,48, Size: 2,2.25,2.5,2.75,3,3.5,4,4.5 ,,With Laser Cut Technology Seamless Tubing In A Serpentine Patern , Dual Drug Sirolimus Coated Stent Unique Fusion Coating Both Stent & Balloon Is Drug Coated. Edge Coating : 0.5Mm Of Proximal And Distal Ends Of Balloon Is Also Coated Sizes : 2.25-4Mm Length: 8-40Mm , Des-Sirolimus Eluting Stentwith Biodegradable And Biocompatible Polymer Stent Diameter 2.25(Mm) Stent Length 8 To 48 (Mm) , L605 Cocr Stent Material, 70 Microns Strut Thickness, Sirolimus Eluting Stent With Biodegardable Polymer A Combination Of Plla And Pgla . 6 Cell Design For 2.50/3.00 Mm Stents And 8 Cell Design For 3.25/4.00 Mm Stents. Entry Profile Of 0.017. , Des Rapamycin Eluting Cobalt Chromium Stent With Albumin In-Groove Design Bioabsorbable Polymer Ce Approved , Des Serolimus Eluting Cobalt Chromium Stent Systemdiameter 5 Mm , Des Serolimus Eluting Cobalt Chromium Stent System Diameter 2 Mm , Des,Sirolimus,Cobalt Chromium Short Stent, Length 8Mm , Des,Sirolimus,Cobalt Chromium Intermediate Length, Upto 48 Mm , Des,Sirolimus,Cobalt Chromium Long Stent With Length More Than 48 Mm , Des, Sirolimus 3.9Nano Gram/Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Strent Thickness With Open Cell Structur For Side Branch Re Crossing , Des, Sirolimus 3.9Nano Gram/Stent Length, Cobalt Chromiuml605 Stent With 80 Micron Strent Thickness With Open Cell Structur For Side Branch Re Crossing ,Coating Albuminal And Gradient ,Hydro Philic Distal Shaft Coating , Des, Sirolimus L 605 Cobalt Chromium, Biodegradabe Polymer Dcgi Approved, 65 Micron Struts With Open & Closed Disign Size 2.25 -4 Mm ,Length -10 ,13,15,18,20,24,28,32,36,40Mm , Des,Sirolimus Cobalt Chromium ,Ce/Dcgi, 70Micron Strut ,Size 2.5,2.75,3,3.25,3.5,4 Length:8,13,18,,23,28,33,38, With Plla-Pgla Based Polymer , Everolimus Eluting Coronary Stent System ,Ce Approved With Outerradius Of 0.1725Mm. The Cell Angle Is Between 42 Degree To 57 Degree With Respect To Different Diameter. The Cells Are Connected With A Radius Of 0.2700Mm. Drug Concentration: 1.2 Microgram/Mm2 Of Stent Surface Area. , Des Ce Approved Sirolimus 1.3?M/Mm2 ,Cobalt Chromium 59?M Hybrid Ultra Low Thickness Strut For All Diameters,2?M Of Plla & Plga Polymers And Drug Coating, Crossing Profile 0.88Mm. Diameter 2.25 To 4Mm And Lengths From 8 To 48Mm In All Diameters. , L605 Cocr, 8 Crown Design With An Entry Profile Of 0.017. Sirolimus-Eluting, Features Lmsc Technique For Coating And Stepless Technology For Crimping Diameter: 2Mm-4.5Mm . Length: 8Mm-48Mm, Dcgi Approved , Des, Dual Drug Eluting Polymer Free Stent , Bms, Fda Approved Cobalt Chromium Platform , Bms, Ce Approved Cobalt Chromium Platform , Bms, Only Dcgi Approved Cobalt Chromium Platform , Bifurcation Stent Self Expanding, Nitinol , Bifurcation Stent Balloon Expandable, Platinum Chromium , Bifurcation Stent Sirolimus Eluting, Cobalt Chromium , Bifurcation Stent Paclitaxel Eluting, Cobalt Chromium , Coronary Self Apposing Stent , Multilink Cobalt Chromium , Meshed Stent , Ptfe Covered Stent Stainless Steel, Rapid Exchange Type, Sizes 2.8, 3.5, 4, 4.5, 4.8Mm, Usable Length 143Cm, Crimped Stent Profile 0.068Inch , Biodegradable Vascular Scaffold (Bvs) Everolimus Eluting , Biodegradable Vascular Scaffold (Bvs) Sirolimus Eluting , Peripheral Stents , Renal Stent Diameters-5-7Mm, Lengths-12-18Mm , Covered Peripheral Stent- Self Expanding Self Expanding , Covered Peripheral Stent- Balloon Expandable Balloon Expandable , Covered Stent Diameter:6Mm-14Mm/Length:30Mm-70Mm , Carotid Self-Expandable Stent , Fda Approved Carotid Stent( Open Cell) Nitinol Mesh Straight & Tapered , Fda Approved Carotid Stent (Closed Cell) Nitinol Mesh Straight & Tapered , Coarctation Stent (Covered) Platinum/Iridium, 0.035 Compatible, Diameter - 12-24Mm, Lengths - 16, 22, 28, 34, 39, 45,50,55,60Mm, Delivery System Length - 110Cm , Coarctation Stent (Uncovered) Platinum/Iridium, 0.035 Compatible, Diameter - 12-24Mm, Lengths -, 16, 22, 28, 34, 39, 45,50,55,60 Mm, Delivery System Length - 110Cm , Aortic Stent Graft , Carotid Balloon Expandable Stent , Peripheral Self-Expanding Stents Nitinol/ Eptfe, Guidewire - 0.035, Diameters-6, 7, 8, 9, 10, 12, 13.5Mm, Lengths - 40, 60, 80, 100, 120Mm, Delivery System Lengths -80, 117Cm , Balloon Expandable Peripheral Stents (Bms) , Fda Approved Balloon Expandable Iliac Stents (Co Cr) Cobalt Chromium, Compatible Guidewire - 0.014, Diameters- 6-10Mm, Lengths - 12, 16, 19, 29, 39, 59Cms, Delivery System Lengths- 80, 135Cm , Balloon Expandable Biliary/Iliac Stents (Stainless Steel), 0.035 Compatible Stainless Steel, Compatible Guidewire - 0.035, Diameters- 6-10Mm, Lengths - 17, 25, 27, 37, 57Mm, Delivery System Lengths - 75, 135 , Balloon Expandable Iliac Stents (Stainless Steel) Stainless Steel, Compatible Guidewire - 0.035, Diameters- 11,12Mm, Length - 30Mm , Balloon Expandable Renal Stent (Co Cr) Cobalt Chromium, Compatible Guidewire - 0.035, Diameters- 4, 4.5, 5, 5.5, 6, 6.5, 7Mm, Lengths - 12, 15, 18Cms, Delivery System Lengths- 80, 135Cm , Balloon Expandable Biliary/Renal Stent (Stainless Steel) Stainless Steel, Compatible Guidewire - 0.014& 0.018, Diameters- 3-8Mm, Lengths - 12, 16, 20, 24, 30Cms, Delivery System Lengths- 80, 135Cm , Fda Approved Interwoven Nitinol Stent For Sfa/ Popliteal .Lowest Kink Resistant ,Diameters-4.5-6.5Mm, Lengths - 20,30,40,60, 80, 100, 120, 150Cm, Delivery System Length - 120Cm , Stent Across Hip/Knee Joint,Diameters- 6,7,8Mm, Length - 120Cm , Fda Approved Self Expanding Nitinol Stent System For Iliac Arteries 0.035 Compatible ,Diameters-6,7,8,9,10Mm, Guidewire - 0.035,Length 20,30,40,60,80,100, Delivery System Length - 80,135Cm , Nitinol Stent System For Iliac Arteries 0.035 Compatible Diameters- 12Mm, Guidewire - 0.035, Lengths - 20, 30, 40, 50, 60, 70,80, 100, 120Cm, Delivery System Length - 75, 120Cm , Nitinol Stent System For Iliac Arteries 0.018 Compatible,Diameters- 6, 7, 8, 9, 10Mm, Guidewire - 0.018, Lengths - 20, 30, 40, 60, 80Cm, Delivery System Length - 125Cm , Nitinol Stent System For Sfa Diameters- 5, 6, 7, 8, Lengths - 20, 40, 60, 80, 100, 120, 150, 200Mm, Delivery System Length - 75, 130 , Elgiloy Endoprosthesis System For Iliac A,Diameters- 6, 7, 8,9,10Mm Lengths - 18, 20, 23, 24, 34, 35, 36, 38, 39, 46, 47, 49, 52, 55, 59, 61, 66, 67, 69Mm, Delivery System Length - 75, 135 , Self Expandable Peripheral Stent System,Diameter :3.8Mm-4.5Mm/Length:16Mm-76Mm , Self Expandable Peripheral Stent System, Diameter :9Mm-14Mm/Length:8Cm-120Cm , Fda Approved Sfa Self Expanding Peripheral Stent ,Length From 120- 150Mm On 135 Cm Catheter , Self Expandable Peripheral Stent System,Straight Type-Diameter:6Mm-10Mm/Length:135Cm Tapered Type-Diameter:(8/6)Mm-(10/7)Mm/Length:135Cm , Balloon Expandable Peripheral Stentdiameter:5Mm-10Mm/Length:12Mm-57Mm , Balloon Expandable Peripheral Stent,Diameter:5Mm-7Mm/Length:14Mm-21Mm , Platinum - Iridium Stents For Large Vessels - Covered And Uncovered - For Use In Large Vessels , Coronary Balloons , Semicompliant Balloon Balloon Size: 1.2Mm- 5 Mm / Length: 6 Mm -42 Mm,(Fda Approved) , Noncompliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm -30Mm,(Fda Approved) , 1.25-2.5Mm Semicompliant Otw Balloon For Cart Technique Balloon Length: 10-20 Mm / Shaft Length: 135,148Cm, Entry Profile - 0.43 Mm (Fda Approved) , Rapid Exchange Noncompliant Balloon Balloon Size: 1.2Mm- 5 Mm / Length: 6 Mm -42 Mm (Fda Approved) , Rapid Exchange Semicompliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm -42 Mm (Fda Approved) , Otw Noncompliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm -30 Mm (Fda Approved) , Otw Semicompliant Balloon Balloon Size: 1.2Mm - 5 Mm / Length: 6 Mm -30 Mm (Fda Approved) , 1.25-2.5Mm Semicompliant Cto Balloon Balloon Length: 10-20 Mm / Shaft Length: 148Cm,(Fda Approved) , Pmda Japan Approved Semi Compliancecto Balloon. Normal Pressure @ 6Atm, Rated Burst Pressure 14Atm. Proxiamal Shaft Diameter 1.9Fr, M Ii Hydrophilic Coating , Lesion Entry Profile 0.40Mm, Complete Of Balloon Length 5Mm-20Mm And Size 1Mm , Ce Approved Rapid Exchange Balloon For Chronic Total Occlusion. 0.016Mm Lesion Entry Profile &Tapered Balloon Shape For Preventing Buckling ,Crossing Profile Of 0.019,With Hydrophilic Coating With Proximal Single Marker,Shaft Length 140Cm, , Us Fda Approved Rapid Exchange 1.2-2 Mm Semicompliant Cto Balloon ,Balloon Length:6-30Mm / Shaft Length: 145Cm, , Rapid Exchange Compliant/ Noncompliant Balloon, Balloon Diameters-4-6Mm, Lengths-15,20Mm, Catheter Length-150Cm, Nominal Pressure-6Atm (Fda Approved) , Rapid Exchange Compliant/ Noncompliant Balloon, Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-142Cm, Nominal Pressure-6-14Atm(Fda Approved) , Monorail Compliant/ Noncompliant Balloon,Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-140/135Cm, Nominal Pressure-6Atm (Fda Approved) , Monorail Compliant/Noncompliant Balloon,Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 143Cm, Nominal Pressure-12Atm(Fda Approved) , Nc Balloon Twin Layered For Very High Pressure Dilatation,Balloon Diameters-2- 6Mm, Lengths- 6- 30Mm, Catheter Length- 142Cm(Fda Approved) , Semicompliant/ Noncompliant Balloon With Tip Entry Profile 0.019,Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014 Compatible(Fda Approved) , Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter ,Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014 Compatible (Fda Approved) , Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter ,Avrage Burst Pressur Of 18 Atmosphere And 143Cm Length (Fda Approved) , Us-Fda Approved For Cto Indication, Semi & Non Compliant Balloon Dilatation Catheter ,Size:1.5,2,2.5Mm, Length:6,8,12,15(Fda Approved) , Fda Approved Semi-Compliance Balloon With Flexible Tungsten Markers Balloon Diameter-1.20Mm,1.5Mm,2Mm,2.25Mm,2.5Mm,2.75Mm,3Mm,,3.25Mm,3.5Mm,3.75Mm,4Mm,4.5Mm &5Mm. Balloon Length-6Mm,8Mm,12Mm,15Mm,20Mm,25Mm,&30Mm. , Fda Approved Non-Compliance Balloon,With Flexible Tungsten Markers Balloon Diameter-1.5Mm,2Mm,,2.25Mm,2.5Mm,2.75Mm,3Mm,3.25Mm,3.5Mm,3.75Mm,4Mm,4.5Mm &5Mm Balloon Length-6Mm,8Mm,12Mm,15Mm,20Mm,25Mm. , Rapid Exchange Semicompliant Nylon Semi-Compliant Balloon With 0.017 Tip Entry Profile, 135 Mm Effective Length | Balloon Size: 1.5Mm - 4 Mm / Length: 9 Mm -30 Mm (Fda Approved) , Rapid Exchange Pebax Noncompliant Balloon Balloon With Patented Hydrophilic Coating On Distal Shaft With 0.017 Tip Entry Profile ,Balloon Diameters 2.25 - 4.0 Mm , Lengths 6.0 - 30 Mm, Effective Catheter Length-142Cm, Nominal Pressure-6Atm (Fda Approved) , Ptca Balloon Less Than 0.016 Tip Profile Low Profile Rapid Exchange Semi-Compliant Balloon With With Rbp Of At Least 14 Atm With 2.3 F Shaft. Dia 1.00Mm, 1.25Mm, 1.50Mm, 1.75Mm, 2.00Mm, 2.25Mm, 2.50Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.50Mm & 4.00 Mm And Lengths From 5Mm, 10Mm, 15Mm, 20Mm & 30Mm. (Fda Approved) , Non-Compliant Rapid Exchange Ptca Balloon, With Enhanced Push Ability, Trackability And Kink Resistance, Rbp 22 Atm, Average Burst Pressure Of 30 Atm; Tip Entry Profile = 0.016. Diameters 2.00Mm, 2.25Mm, 2.5Mm, 2.75Mm, 3.0Mm, 3.25Mm, 3.5Mm, 3.75Mm, 4.0Mm, 4.5Mm & 5.0Mm-5.0 Mm, Lengths From 8Mm, 10Mm, 12Mm, 15Mm & 18Mm .(Fda Approved) , Semi Compliant Xd Shaft ,Hydro X Coating Z Tip From 1Mm To 4Mm Size :1,1.25,1.5,2,2.25,2.5,2.75,3,3.25,3.5,4, Length:8,10,12,15,20 (Fda Approved) , Non Compliant Ptca Balloon Catheter With Crossing Profile Of 0.0360.Np Is 12,Rbp 20 Atm Hydro X(Distal Tip To Guide Wire Exit Port) Invio Coating (Guide Wire Lumen) Size:1.75,2,2.25,2.5,2.75,3,3.25,3.5,3.75,4,4.5,5 ,Length: 8,10,12,15,18 (Fda Approved) , Ultra Low Profile Cto Balloon With 0.016 Tip Entry Profile,Flexible Tip. Tri Wrapped Balloon Provides Enhancing Crossability.Thin Proximal Shaft Of 1.9 F Nominal Of 6 Atm And Rbp Of 14 Atm. 1.25 To 3Mm Diameter Ballon(Fda Approved) , Fda Approved ,Non Compiant Ptca Balloon Catheter With Hydrophilic Coating Shaft Length Is 145Cm,Shaft Diameter :2F (0.67) Proximal ,Distal:2.5F (0.83),Distal For 2.25Mm To 3Mm2.6 Fr (0.87Mm) Distal For 3.25Mm To 5 Mm With Double Ballon Marker ,Rbp;20 Atm For 2.25Mm To 4Mm,18Atm For 4.5 To 5Mm With Entry Profile 0.43Mm , (Fda Approved)Non Compliant Hydrophilic Coated Balloon With Flexible Thin Markers,Tri Layer Balloons With Soft Inner And Outer Elastomer Layers That For Resistance From High Pressures And Stronger Polymide Layer In The Middle For Aditional And Safer High Pressur Ressistance., Shaft Diameter Of 1.9F Proximal And 2.5F In The Mid Segment 145 Cm Length With Nominal Pressure Of 12 Atm And Rbp 22 Atm ,Lesion Entry Profile 0.017 , Sirolimus Eluting Balloon Nanolute Propritory Nano Carrier Drug Eluting Tecnology Drug:1.27?/Mm2of Sirolimus Drun Release Within 60 Secs.14 To 28 Days Drug Bio Availability In Target Tissue ,Size: 2Mm -4Mm Length:40Mm To 100Mm (Fda Approved) , Fda Approved Specialised Proximal Optimisation Balloon Dilatation Catheter With Ultra Short Balloon Shoulder Of 0.6Mm And An Rbp Of 22 Atm With Sizes Ranging From A Length Of 6-15 Mm And Diameters Ranging From 2.25-5 Mm. Hydrophilic External Surface Coating From Tip To Adjacent Guidewire Port And Silicone Coating Inside Guidewire Lumen. , (Ce Approved) Non Compliant Ptca Balloon Catheter With Selective Hydrophilic Coating At Distal Shaft Including Balloon Tip, Length (Mm): 6,8,10,12,15,20,25,30 ? Diameter(Mm): 2,2.25,2.50,2.75,3.00,3.25,3.5,3.75,4.00,4.5 & 5.0, Tip Entry Profile = 0.016 (0.41 Mm) Ultra Low Tip Entry Profile ? Shaft Diameter: Proximal = 1.95 F & Distal = 2.67 F , Fda Approved 0.75 Mm Cto Balloon With A Tip Entry Profile Of 0.015 And Ultra Low Crossing Profile Of 0.020 With A Proprietary Distal Welding Technology, 2.2F Distal Shaft, Rated Burst Pressure Of 20 Atm And Average Burst Pressure Of = 28 Atm. Diameters From 0.75Mm, 1.0Mm, 1.25Mm, 1.50Mm, 1.75Mm & 2.0Mm And Lengths From 5Mm, 8Mm, 10Mm, 15Mm, 20Mm, 25Mm & 30Mm. , Ce Approved Semi-Complaint Low Entry Profile Balloon Entry Profile 0.0157 Inch , Dia- 1.00,1.50,2.00,2.25,2.50,2.75,3.00 Length - 06,10,12,15,20 - Shaft 2.3Fr - Effective Length 1460Mm , Ce Approved Non-Complaint Balloon Shaft Outer Diameter (Proximal) : 2.1Fr/0.70Mm , Dia - 1.50,1.75,2.00,2.25,2.50,2.75,3.00,3.25,3.50,4.00,4.25,4.50 Length - 08,10,13,15,20 - Effective Length 1460Mm , Ce Approved Non Complaint Balloon Catheter Balloon Size : 2.25Mm - 5Mm/Length : 6Mm-20Mm Rapid Exchange Proximal Shaft 2.3 F And Distal Shaft - 2.7 F,Tip Entry Profile 0.017 With Nominal Inflation Pressure 12 Atm & Rbp-20 Atm,And Having Two Plantium Iridum Markers. , Ce Approved Semi Complaint Balloon Catheter, Inner Shaft With Patented 2 Layer Design Using Specialized Material. Balloon Size : 1.00 Mm - 4.00Mm/Length : 6Mm-20Mm Rapid Exchange,Proximal Shaft-2.2 F And Distal Shaft-2.1 F,Crossing Profile 0.021 - 0.027 With Nominal Inflation Pressure-6 Atm & Rbp-16 Atm. , Cto/Semi-Complaint Low Entry Profile Balloon(Tr2 Coating) , Entry Profile 0.0157 Inch , Dia- 1.00-4.00Length - 06-30 - Shaft 2.3Fr - Effective Length 1460Mm, Ce Approved , Rapid Exchange Compliant/ Noncompliant Balloon,Balloon Diameters-4-6Mm, Lengths-15,20Mm, Catheter Length-150Cm, Nominal Pressure-6Atm (Ce Approved) , Rapid Exchange Compliant/ Noncompliant Balloon,Balloon Diameters-1.5- 4Mm, Lengths- 9- 30Mm, Catheter Length-142Cm, Nominal Pressure-6-14Atm(Ce Approved) , Semicompliant/ Noncompliant Balloon With Tip Entry Profile 0.019,Balloon Lengths-8-38Mm, Balloon Diameters-2-4.5Mm, 0.014 Compatible(Ce Approved) , Non Compliant Ptca Balloon Catheter With Hydrophilic Coating ,0.16 Lesion Entry Profile And 24 Bar Rbp(Ce Approved) , Semi Complaint Ptca Balloon ,Catheter With Hydrophilic Coating On Balloon And Distal Shaft Including Sleeve And Transition Tube With Comparable Lesion Entry Profile(Ce Approved) , Twin Layered Super High Pressure Balloon Dilated Catheter For Highly Calcified Lesion,35 Bar Rbp,45 Bar Abp-Ce Marked(Ce Approved) , Semicompliant Balloon,Balloon Size: 1.5Mm- 2.5 Mm / Length: 8 Mm -20 Mm Rapid Exchange Proimal Shaft 0.72Mm And Distal Shaft -0.90Mm, Tip Profile -0.018 With Nomial Inflation Pressure 12 Atm &Rbp -22 Atm , And Having Two Plantinum Iridum Markers (Ce Approved) , Ptca-Rapid Exchange Semi Compliant Pre-Dilation Catherer,Entry Profile0.017,Crossing Profile 0.026,Shaft Length 2.2Fr Skived Over Extruded Hypotube Distal 2.4 Fr, Size:1.5,2,Lengt: 10,15,20,30(Ce Approved) , Semi Compliant Pre-Dilation Catherer, Balloon Material Nylon 12,Entry Profile0.017,Crossing Profile 0.026,Shaft Length 2.2Fr Skived Over Extruded Hypotube Distal 2.4 Fr, Size:2.52.75,3,3.25,3.5,3.75,4Lengt: 10,15,20,3032(Ce Approved) , Ptca-Rapid Exchange Non Compliant Post-Dilation Catherer,Entry Profile0.017,Crossing Profile 0.032, Proximal Shaft 2.2Fr, Over Spv Hypotube Distal 2.6 Fr, Size:1.5,2,2.5,2.75,3,3.25,3.5,3.75,4Mmlengt: 10,15,20,30Mm(Ce Approved) , Peripheral Drug Eluting Balloons For Pta , Peripheral Drug Eluting Balloon-0.035 Guide Wire Compatible-,Balloon Size: 4 Mm --7Mm / Length: 40Mm ---150 Mm , Peripheral Drug Eluting Balloon -0.018 Guide Wire Compatible--Balloon Size: 4 Mm --7Mm / Length: 40Mm ---120 Mm , Sirolimus Eluting Pheripheral Balloon Nanolute Nano Carrier Drug Eluting Tecnology.Low Crossing Profile ,Size:5Mm-9Mm Length:40Mm-100Mm , Peripheral Balloons For Pta , Peripheral Otw Balloons -0.035 Guide Wire Compatible,Balloon Size: 3Mm- 12 Mm / Length: 20Mm -300 Mm , Peri. Otw Balloon--0.035 Guide Wire Compatible-,Balloon Size: 4 Mm --12Mm / Length:20Mm -20Mm-100Mm , Peri. Otw Balloon- 0.018 Guide Wire Compatible- ,Balloon Size: 2 Mm --7Mm / Length: 20Mm ---150 Mm , Peri. Otw Balloon-0.018 Guide Wire Compatible- ,Balloon Size: 4Mm --7Mm / Length: 20Mm ---300 Mm , Peripheral Otw Balloon 0.014 Guidewire Compatible,Balloon Size: 1.5Mm--6Mm / Length: 20Mm ---210 Mm , Pta Rapid Exchange Balloon Catheter,Balloon Size: 2Mm--4Mm / Length: 20Mm ---210Mm , Fda Approved Low Profile High Presseure Balloon - Below The Knee, Diameter :4Mm To14mm Length 20 ,40,60,80 Shaft 90 To 150 Mm , Fda Approved Low Profiel High Pressure Balloon - Sfa, 6F Compatible Upto 7Mm Dia , Fda Approved High Pressure Balloon - Carotid, Renal, With 6F Compatible Upto 7Mm Dia , Peripheral Pta - Special Devices , Peripheral Cto Device,Flexible/Standard-0.014Guidewire Compatibility , Peripheral Cto Device,Balloon Size 3.75Mmx1.5Mmx20mm/2.75Mmx1mmx20mm , ,Cto Guidewire,Flexible/Standard/Stiff-0.014Diameter,300Cm Length , Peripheral Balloon,Balloon Diameter=1.5Mm-26Mm Length = 20Mm- 300Mm , Peripheral Guide Wire System,Floppy Type/Intermediate Type/Standard Type , Peripheral Wire Hydrophilic,Lengths- 145, 180, 260Cm, Diameter - 0.035-0.038, Angled Or Straight , Directional Atherectomy System For Peripheral,Tip Length:6.6Cm-9.6Cm , Peripheral Plaque Excision System,Crossing Profile:2.2Cm-2.7Cm , Peripheral Support Catheter, , Specialty Balloons , Coronary Sinus Balloon Occlusion Catheter.Balloon Diameter - 10Mm, 15Mm,Balloon Lengths-10Cm,20Cm, Catheter Lengths - 80Mm, 100Mm, 200Mm, Guidewire Compatibility- 0.025, 0.035 , Drug Eluting Balloon(Sirolimus).Balloon Size: 1.5Mm - 6 Mm / Length: 10 Mm -250Mm , Drug Eluting Balloon.Balloon(Paclitaxel) Size: 1.5Mm - 6 Mm / Length: 10 Mm -250Mm , Ce Approved Drug Coated Balloon Catheter,Bthc Excipient With Secure Technology, Paclitaxel Releasing Balloon Catheter With A Biocompatible Excipient. Diameter:2.0,2.5,3.0,3.5,4.0 Length: 10,15,20,25,30 , Cutting Balloon.Balloon Size: 2Mm - 4 Mm / Length: 6 Mm, 10Mm, 15Mm , Coronary Cutting Balloon Unique Knob Design 4 Lines Of Knobs Rbp Of 22 Atmoptimal Plaque Crushing For Superior Post Dilation Size: 2.50, 3.00, 3.50, 4.00 X 8,12,16 , Ce Approved Ptca Nc Scoring Balloon Catheter With Songle Wire Helical Shape Tapered Tip Available In Sizes From 2.0Mm, 2.5Mm, 3.0Mm, 3.5Mm Diameters And In Lengths From 6Mm, 10Mm & 15Mm. , Fda Approved Ptca Scoring Balloon Catheter With Tapered Tip And Three Nitinol, Helical Shaped, Electropolished Scoring Elements With Rectangular Edges, Mounted On A Balloon With A Larger Working Range Of 2 Atm - 20 Atm And Available In Sizes From 2.0Mm, 2.5Mm, 3.0Mm, 3.5Mm Diameters And In Lengths From 6Mm, 10Mm & 15Mm. , Usfda Scoring Balloon With Tifo Folding And X-Flex Tip.Balloon Size: 2Mm - 4 Mm / Length: 6 Mm, 10Mm, 15Mm , Scoring Balloon.Balloon With Three Helical Nitinol Size: 2Mm - 4 Mm / Length: 6 Mm, 10Mm, 15Mm , Diagnostic Catheter , Dcgi Approved Tig Catheter.5F-6F / 100 Cm, , Ce / Fda Approved Tig Catheter.5F-6F / 100 Cm, , Pdma Approved Tiger Curve Diagnostic Catheter For Radial Angiogram-Size:5F-6F / 100 Cm, Soft Catheter With 1:1 Torque Control Internationally Accepted Terumo Quality And Equal Performance Needed For Patient Safety & To Avoid Spasm Of Radial Artery,5F-6F / 100 Cm, , Pigtail,5F & 6F / Lengths 100, 110 & 125Cm, Side Holes 6 & 12 , Angled Pigtail Catheter,5F & 6F, Curves145& 155, Lengths 100,110 &125Cm, Side Holes 6 & 12 , Glidecath Hydrophilic Catheter, 5F-6F / 100 Cm,125Cm , Multipurpose(Mpa1,A2,B1,B2) Diagnostic Catheter ,5F-6F / 100 - 125 Cm , Cerebral Diagnostic Catheter,5F-6F / 100 Cm, , Amplatz Catheter Left/Right-Ar/Al1,2 Diagnostic Catheter,5F-6F / 100 Cm-125 Cm , Judkins Right / Left Diagnostic Catheter (Jr/Jl),4F-7F / 100 Cm,-125 Cm , Mother And Child Catheter Size - 6F/Extension Length 15Cm , Ntr( No Torque Right) Catheter,Useful For Engaging Anteriorly Angulated Bypass Graft(Including Lima From The Left Radial Approch& Rima From The Femoral Approach) , Unique Hydrodynamic Surface For Low Resistance- 5F &6F -Large Inner Lumen - Superior Kink Resistance- 1-To1 Torque Catheter With Double Wire Stainless Steel Braiding In 6F Atraumatic Soft Tip , Pediatric Diagnostic Catheters : All Lengths, All Curves, 4F And 5F Compatible , Coronary Guiding Catheters , Fda Approved Guiding Catheter For Ptca,6F-8F / 47-110 Cm, With Steel Braided, All Sizes , Fda Approved Guiding Catheter For Ptca,6F-8F / 47-110 Cm, With Encapsulated Flat Braided Wire, Vest Tech Nylon Outer Jacket, All Sizes , Ptca Guiding Catheter, 100 Cm Long: It Should Be Large Lumen (Minimum Of 0.070 Inner Lumen In 6F And =0.080 In 7F), Stainless Steel Braided, Inner Layer Coated With Ptfe. It Should Have Traumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3, 3.5, 4,5 Cm), Size 5F/6F/7F/8F. B)Judkins Right Without Side Holes (Curves 3, 3.5,4, 5 Cm), Size 5F/6F/7F/8F. C)Judkins Right With Side Holes (Curves 3, 3.5, 4, 5Cm), Size 5F/6F/7F/8F. D) Ima Guiding Catheter, Size 5F/6F/F. E) Multipurpose (Ai, All), Size 5F/6F/7F/8F. F) Multipurpose (Bi, Bii), 5F/6F/7F/8F. G) Amplatz Left (Curves Alo.75, Al1, Al1.5, Al2,Al3). 5F/6F/7F/8F. H) Amplatz Right (Curves Ar1, Ar2), 5F/6F/7F/8F. I) Voda Left, 5F/6F/7F/8F. J) Left Coronary Bypass Guide Catheter, 6F/7F. K) Right Coronary Bypass Guide Catheter, 6F/7F. I) Extra Back-Up (Ebu) Left, 5F/6F/7F/8F. M) Extra Back-Up (Ebu) Right, 5F/6F/7F/8F. N) 3D Right Guiding Catheter, 6F/7F. 0) Hockey Stick Guiding Catheter, 6F/7F. P) Shepherd Crook Right Type Guiding (Curves 3.5,4,5), 6F/7F. Q) Head Hunter Guiding Catheter, 6F/7F. , Ce Approved Guiding Catheter All Sizes , Pmda Japan Approved Guiding Catheter All Sizes , Judkins Right Guiding Catheter ( Paediatric),4F, 5F , 3 Dimensional Right Guiding Catheter (3Drc) For Ptca,6-8F /47 -110 Cm , Extra Backup Left Guiding Catheter (Xbu) For Ptca,6F /47 -110 Cm , Contralateral Left Support (Cls) Guiding Catheter For Ptca,6-Ff /47 -110 Cm , Femoral Right Guiding Catheter For Ptca (Fr),5-8F /47 -110 Cm , Femoral Left Guiding Catheter For Ptca (Fl),5-8F /47 -110 Cm , Fda Approved Mother And Child Catheter , Pmda Japan Approved Mother And Child Catheter , Guiding Catheter With Hyper Shaft,Reinforced 2Nd Curve,3Rd Curve,Henka-Braid,All Round Processed Tip,Ptfe Liner. 100Cm Length; 6Fr (Id- 1.80 Mm, Od - 2.09 Mm), 7 Fr (Id - 2.05 Mm, Od- 2.40 Mm), 8 Fr (Id- 2.28 Mm, Od- 2.70 Mm) , Large Lumen Guiding Catheter, Uniquehydrophilic Coating (68 In Middle,7Cm Distal And 25 Cm Proximal Is Uncoated.) Balancing Flexibility And Support. All Curves 5F-8F Are Available. , Aspiration Catheters , 135 Cm Thrombus Aspiration Catheter,Outer Diameter: 3.9-5.4F , 140 Cm Thrombus Aspiration Catheter,Outer Diameter: 3.9F , 145 Cm Thrombus Aspiration Catheter,Outer Diameter: 3.5 F , Fda Approved Thrombus Aspiration Catheter , Fda Approved Aspiration Catheter Of 6F And 7F Guiding Catheter Compatibility; 140 Cm Working Length Catheter With 140 Cm Stylet Length; 90 Cm And 100 Cm Depth Markers; Provide 60Ml Aspiration Syringe For High Suction Efficiency; Large Size Collecting Filter. , Ce Approved Thrombus Aspiration Catheter , Ce Approved Thrombus Aspiration Catheter With Stylet , Fda Approved, Kink Resistant Pedax Distal End, With Out Stilet, Crossing Profile 4.5F , Pmda Approved Thrombus Aspiration Catheter , Thrombus Aspiration Catheter With Braided Technology,Catheter Length 145Cm, Maximum Tip Diameter - 1.73, 1.98, Guide Catheter - 6, 7F , Low Profile Thrombus Aspiration Catheter,Maximum Tip Diameter - 1.40, Length 145 Cm , Thrombus Aspiration Catheter With Tapered Silva Tip With Sloped Extraction Lumen,0.014, Length-140Cm, Rapid Exchange Length-20Cm , Hemostatic Agents, Devices And Vascular Closure Devices , Thrombin And Collagen Based Flowable Hemostat For Pacemaker Pocket Hemostasis.Thrombin Vial , Collagen Syringe With Attached Mixing Luer, Diluent Vial, Mixing Accessories, Applicator Tips , Monofilament Suture Type Vascular Closure Device,Puncture Size - 8F-21F , Braided Suture Type Vascular Closure Device,Puncture Size - 5F- 8F , Mechanical Seal Type Vascular Closure Device,Puncture Size- 5/6, 7/8 , Balloon Type Radial Artery Compression Device,Transparent Dual Compression Balloons, With Velcro Straps, Sizes 24-29Cm , Dial Type Radial Artery Compression Device, , Brachial/Radial Artery Compression Device With Plastic Strap,Adjustable Plastic Strap, Sizes 21-37Cm , Pressure-Assisted Radial Artery Compression Device, Inflatable Bulb Type , Pressure-Assisted Femoral Artery Compression Device,Inflatable Bulb Type, Sizes 12,24Cm , Embolization Particles /Coils/ Ivc Filters , Embolization Particles- For Intracranial Embolization,Sizes: 90-180, 180-300, 300-500, 500-710, 710-1,000, 1,000-1,400, 1,400-2,000, 2,000-2,800. , Pva Particles- For Peripheral Av Malformations,Sizes- 45-150, 150-250, 250-355, 355-500, 500-710, 710-1,000, 1,000-1,180, Color Coded Vials, Irregularly Shaped Flakes , Cerebral Coils,All Available Diameters, All Available Lengths , Ivc Filter,30 Cm Filter Diameter,7 F Size , Embolization Coils - Platinum Type,Material-Platinum, All Available Diameters, All Available Lengths , Embolization Coils- Inconel Type,Material -Inconel, All Available Diameters, All Available Lengths , Cyanoacrylate Glue For Embolisation, , Poppyseed Oil,Injection As A Radio-Opaque Contrast Agent That Is Used To Outline Structures In Radiological Investigations , Peripheral Guiding Catheters , Guiding Catheter For Renal,Size - 7-9/ Length - 55,96 , Peripheral Guiding Catheter,Size - 6-8/ Length - 55,90 , Peripheral Guiding Catheter,6F-10F , 50 Cm Length , Paediatric Diagnostic Catheters,Catheter Make With Sixteen Stainless Steel Wire Braids To Impart 1:1 Torque Control To Catheter Tip And Maximize Pushability, Made Of Nylon Material Which Resists Softening During Prolonged Catheter Manipulation. Short, Flexible Atraumatic Catheter Tip To Maintain Stability During Injection. Catheter Tip Shapes - Jl1 -4; Jr 1-4; Pigtail, Pulmonary Curve Catheters, Multipurpose Catheters (A, B, Nih, Vert), Cobra (C1-C3), Ar(1,2), Al(1,2), Head Hunter (H1-H3), Sim(1-3), 4 Fr To 7Fr. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Balloon Floatation Right Heart Catheter : Balloon Tipped Catheters For Right Heart Study, For Pressure Measurement - Single / Double Lumen. . Internationally Accepted Quality And Equal Performance Needed For Patient Safety , Balloon Floatation Right Heart Catheter: Balloon Tipped Catheters For Right Heart Angiography - With Multiple Holes. . Internationally Accepted Quality And Equal Performance Needed For Patient Safety , Carotid Guiding Catheter (Guide Catheter For Neuro),Size: 7-9 /55,96 , Sheathless Guiding Catheter For Carotid ,6.5 To 7.5 F, 89 Cm Length , Support Catheter For Flush Total Occlusions And Angulated Lesions - Straight,7Fsize, 7-110 Cm Length , Special Catheters , Guide Extension Catheter,120 Cm Proximal Hypotube Shaft, 0.057 (1.45 Mm) Innerdiameter, Hydrophilic Coating, Atraumatic Tip, Extended Length 25Cm, 2 Radio-Opaque Markers , Gude Extension Catheter With A Tapered Shaft(5.3Fr To 4.5Fr) With A Non Matalic Tip , Fda Approved Guide Extension Catheter Available In Variable Diameters Of 4.7F And 5.0F For Accessing Distal Anatomy And Delivering High Profile Devices; Guide Extension Catheter With A Tapered Distal Shaft For Accessing Distal And Challenging Coronary Anatomy; Guide Extension Catheter With A Resinous Atraumatic Tip; Guide Extension Catheter With A Large Entry Port Design For Easy Device Insertion , Guidewire Reentry Catheter With Guidewire,Catheter: Self Orienting Flat Balloon Length 10Mm, 180O Opposed Proximal And Distal Ports With Markers, Working Length-135Cm , Guidewire Reentry Catheter With Guidewire,Catheter: With A Ratcheting Torque Device, Working Length-135Cm , Double Lumen Otw Catheter For Bifurcation Lesions,0.014 Guide Wire Compatible, Length - 140Cm , Reinforced 18 Endhole-Infusion, Diameter:2.8Mm-2.3Mm/Length:135Cm-Cm-158Cm , Reinforced 27Microcatheter,Diameter:2.8Mm-2.8Mm/Length:135Cm-Cm-150Cm , Wire Control Catheter - Cs Catheter,Length-70Cm, Inner Diameter-0.018 , Wire Control Catheter - Otw/ Rx,Length-140, 145Cm, Inner Diameter-0.018 , Micro Porous Ptfe Balloon Catheter,0.014 Guide Wire Compatible , Focal-Force Pta Balloon Catheter, 0.035 Compatible,Balloon Diameters-5Mm-12Mm, Balloon Length- 4Cm, Catheter Lengths- 50,80,135Cm , Flow-Directed Balloon Catheter,Size-5.3F, Catheter Length -80Cm, Diameter - 10Mm, Volume-1Ml , Dual Balloon Ostial Angioplasty Catheter,Balloon Diameter- Distal: 3, 3.5, 4, 4.5Mm; Proximal: 11Mm Maximum, Catheter Length- 135Cm, Balloon Lengths- Distal: 8; Proximal: 10Cm, Inflation Volume 0.4-Ml (Proximal , Dual Balloon Ostial Angioplasty Catheter,Balloon Diameter- Distal: 3, 3.5, 4, 4.5Mm; Proximal: 11Mm Maximum, Catheter Length- 135Cm, Balloon Lengths- Distal: 8; Proximal: 10Cm, Inflation Volume 0.4-Ml (Proximal) , Dual Balloon Ostial Angioplasty Catheter ,-Otw,6.6F, Balloon Diameters- Distal: 6, 7Mm Proximal: 14Mm Maximum, Balloon Lengths- Distal: 12, 17Cm; Proximal: 14, 15Cm , Cryoplasty Catheter System For Peripheral Bperalloon Angioplasty,8F, Balloon Diameters-2, 2.5, 3, 3.5, 4, 5, 6, 7, 8Mm, Balloon Lengths- 40, 100, 150Cm , Targeted Drug Delivery System,7F, Adjustable Dual Occlusion Balloons With Diameters- 2.5-10Mm, Balloon Length-1Cm , Conformable Occlusion Balloon System For Asymmetric Vessels,Balloon Lengths-7Mm-15Mm, Balloon Diameters-3, 4, 7Mm , Occlusion Balloon System For Distal Vessels,Balloon Lengths-10Mm-30Mm, Balloon Diameters-3,4,5Mm , Microcatheters , 2.8 F Proximal Size Microcatheter For Retrograde Approach,Stainless Coil Shaft With 10 Braided Wire, Distal Size: 1.26 F / 150 Cm Length , 2.1F Proximal Size Specialty Micro Catheter,Long Taper With Platinum Tip And Stainless Steel Rope,Distal Size: 1.8F / 135 Cm Length , 2.6 Fr Proximal Size Specially Micro Catheter,Ong Taper With Platinum Tip And Stainless Steel Rope, Distal Size: 2.1 Fr/ 135 Cm Length. , 2.9 Fr Proximal Size Ordinary Micro Catheter,Distal Size: 2.2 - 2.4 Fr / 150 Cm Length. , 130 & 150 Cm Stainless Steel Braide , Hydrophilic Coating , Tapered Inner Shaft With Floppy Distal 13 Cm Segment, Proximal Size 2.6 F , Distal Size 1.8 F , Radio Opaque Tip , Micro Catheter:Tip 1.4 Fr Hydrophilic Coated Shaft Length 135Cm,Shaft Outer Diameter :Distal-1.9Fr,Proximal:2.6Fr.Shaft Inner Diameter -Distal:0.017Fr,Proximal:0.022Frwith Unique Braiding For Flexibility And Kink Resistance , 2.7 F Proximal Size Micro Cathetre With 021 Hydrophilic Coating Wire, Tungsten Coil Pitch, Distal 2.9 F,Length 130 Cm , Entry Profile 1.6 Fr,Tapered And Robust Tip Material ,Braided Shaft Hight Pushability With Hard Proximal Shaft .Shaft Length 135Cm, With Hydrophilic Coating 43Cm , 2.8Fr And 2.5 Fr Micro Cathetre For Used In Small Vessel Or Super Selective Anatomy .For Pheripheral And Coronary Use ,Inner Diameter 0.21&0.25 ,Length 100,135,150Cm , Microcatheter For Delivery Of Micro Coils,Vortec Fiber Braided Microcatheter, Length 130 And 150 Cm, Proximal Size 3Fr, Distal Size 2.5 Fr, End Hole Diameter 0.021 Inch, With Radio Opal Tip And Hydrophilic Coating , Microcatheter For Delivery Of Micro Coils, Capable Of Injection , Vortec Fiber And Platinum Braided Microcatheter, Length 105 To 150 Cm, Proximal Size 3Fr, Distal Size 2.8 Fr, End Hole Diameter 0.027 Inch, With Radio Opal Tip And Hydrophilic Coating , Ptca Wires , 185 Cm Long Floppy Work Horse Wire For Ptca-Straight / J Tip -Core Material Stainless Stee , 185 Cm Long Intermediate Work Horse Wire For Ptca-Straight / J Tip -Core Material Stainless Steel , 185 Cm Long Extrasupport Work Horse Wire For Ptca-Straight / J Tip -Core Material Stainless Steel , 182 Cm ,300 Cm , Spring Coil , Core To Tip Design, 0.014 With 0.8 Tip Load , Ptca Work Horse Wire-Straight / J Tip , 190 Cm ,0.014 , Hydrophilic Distal 30 Cm & Ptfe Proximal Shaftlong Ptca Work Horse Wire-Straight / J Tip -Core Material Stainless Steel , 180 Cm Long, 0.8 Tip Load , 30 Mm Silicone Coating From Tip, Straight / J Tip -Core Material Stainless Steel , 190 Cm Long, 0.8 Tip Load , 12 Cm Spring Coil Length , Stainless Steel High Tension Core -Straight / J Tip , 180 Cm Long, 0.5 Tip Load Ptca Work Horse Wire -Straight / J Tip , 180 Cm Long, Core To Tip Design , 0.014, 0.7 Tip Load, Hydrophobic , Extra Support Wire,Straight / J Tip , Us Fda Approved 190 , 300 Cm Length, Nitinol Core, Ptca Work Horse Wirewith Polymer Sleeve With Soft Tip Load Of 1Gm & Shaping Ribbon Design .7G Tip Load Straight / J Tip , Us Fda Approved 190 , 300 Cm Length, Nitinol Core, Ptca Work Horse Wirewith Polymer Sleeve ,With Soft Tip Load Of 1Gm & Shaping Ribbon Design .7G Tip Load Straight / J Tip , Us Fda Approved190 , 300 Cm Length, Hydrophobic Coating Type Nitinol Core, Ptca Work Horse Wire ,With Polymer Sleeve ,With Soft Tip Load Of 1Gm & Shaping Ribbon Design .7G Tip Load Straight / J Tip , Us Fda Approved 190 Cm Long, Tip Load-0.8Floppy Work Horse Wire For Ptca ,Straight / J Tip, Core Material Stainless Steel , Polymer Tip , Core To Tip Design , 0.014 With 0.8 Tip Load , With Hydrophilic Tip And Light Support , Us Fda Approved 190 Cm Long, Tip Load- 1 Intermediate Work Horse Wire For Ptca ,Straight / J Tip, Core Material Stainless Steel , Polymer Tip , Core To Tip Design , 0.014 With 0.8 Tip Load , With Hydrophilic Tip And Light Support , Us Fda Approved 190 Cm Long, Tip Load- 1.2 Extra Support Work Horse Wire For Ptca,Straight / J Tip, Core Material Stainless Core Material Stainless Steel , Polymer Tip , Core To Tip Design , 0.014 , With Hydrophilic Tip And Light Support, , 195Cm-Length, Hydrophilic Coating-33Mm, 0.014Diameter, (Floppy, Intermediate, Standard ) Work Horse Wire For Ptca,Straight Tip/ J Tip , Hydrophilic Coating-33Mm, 300Cm-Length, 0.014Diameter, (Floppy, Intermediate, Standard ) Work Horse Wire For Ptca,Straight Tip/ J Tip , 190 Cm Long, Tapered Tip ,0.014 Tapering To 0.009, 0.8 Tip Load Cto Wire For Ptca,Tapered Tip , 190 Cm Long, 0.014 Tpering To 0.010 ,Hydrophylic, 1 Gm Tip Load Cto Wire For Ptca,Tapered Tip , 300 Cm Length,0.014 Diameter, Straight Tip Shape, 0.8 Tip Load Double Length Cto Wire For Ptca,Straight Tip , 300 Cm Long, Tapered Tip , 0.6 Tip Load Cto Wire For Ptca,Tapered Tip , 180 Cm Length,0.014 Diameter, Straight Tip Shape, 0.8 Tip Load Double Length Cto Wire For Ptca,Straight Tip , 180 Cm Length,( Straight Tip Shape ,3-4.5 Tip Load Cto Wire For Ptca, Silicone Coating Over Spring Coil , Straight Tip , 180 Cm Length,( Straight Tip Shape,)6-12 Tip Load Cto Wire For Ptca,Straight Tip , 180Cm Length, 9- 12 Tip Load Cto Wire For Ptca( Tip Shape Straight,),Tapered & Straight Tip , 180Cm Length, 20 Tip Load Cto Wire For Ptca( Tip Shape Straight ),Tapered & Straight Tip , 180Cm Length, 1 Tip Load Cto Wire For Ptca( Tip Shape Straight) ,Hybrid Wire That Fuses Nitinol & Stainless Steel, , 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8Cm Of The Distal Tip , Silicone Tip On The Distal 2Mm , Nitinol Floppy Tip, Straight Tip , 180Cm Length, 3.6 Tip Load Cto Wire For Ptca( Tip Shape Straight) , Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8Cm Of The Distal Tip , Silicone Tip On The Distal 2Mm , Nitinol Floppy Tip,Straight Tip , 180Cm Length, 3.6 Tip Load Cto Wire For Ptca( Tip Shape Straight) , Hybrid Wire That Fuses Nitinol & Stainless Steel, 180 Cm & 300 Hydrophilic Coating Over The Distal 24.8Cm Of The Distal Tip , Silicone Tip On The Distal 2Mm , Nitinol Floppy Tip,Straight Tip ,1:1 Torque , Fda Approved190cm Length, 1.7, Tip Load Cto Wire For Ptca( Tip Shape Straight) ,Stainless Steel Core , Core To Tip Design , 0.014 Wire With 0.010 Tip & Hydrophilic Coating, Straight Tip , Fda Approved 190Cm Length, 4.7 Tip Load Cto Wire For Ptca, Steel Core , Spring Coli Tip , Core To Tip Design , 0.010 Tip ,Hydrophilic Tip Coating, Tip Shape Straight ,Straight Tip , Us Fda Approved 190Cm , 300 Length, 1.5 Tip Steel Core , Polymer Tip , Core To Tip Design , 0.014 Wire With Tip Load Of 1.5 Gm , Hydrophilic Coating , Cto Wire For Ptca,J Tip , Us Fda Approved190cm , 300 Length, 2.7 Tip ,Steel Core , Polymer Tip , Core To Tip Design , 0.014 Wire With Tip Load Of 2.7 Gm , Hydrophilic Coating Load Cto Wire For Ptca,J Tip , 190Cm ,300 Length, 4.1 Tip Load Steel Core , Polymer Tip , Core To Tip Design , 0.014 Wire With Tip Load Of 4.1 Gm , Hydrophilic Coating Load Cto Wire For Ptca,J Tip , 330Cm Length, 3 Tip Load Cto Wire For Ptca, Tip Shape Straight , For Guidewire Externalisation For Retrograde Procedures , Us Fda Approved 190Cm Length, 4.8- 9.7 Tip Load Cto Wire For Ptca,Spring Coil Tip , Core To Tip Design , 0.012 Diameter ,Straight Tip , Us Fda Approved 190Cm Length, 12.5- 13.3 Tip Load Steel Core ,Coil Tip , Core To Tip Design , 0.010 To 0.009 Tapered Tip ,Cto Wire For Ptca( Tip Shape Straight , Hydrophilic Coating Straight Tip , 190Cm ,300 Cm Length, 0.014 Tapering To 0.010, 1.7 Tip Load Cto Wire For Ptca ,Tapered Tip, 1 Mm Preshaped Tip, Microcone Tip , 190Cm ,300 Cm Length, 0.014 Tapering To 0.011, 3.5 Tip Load Cto Wire For Ptca Tip Shape Tapered , Tapered Tip1 Mm Preshaped Tip, Microcone Tip , 190Cm ,300 Cm Length, 0.014 Tapering To 0.012, 4.5 Tip Load Cto Wire For Ptca( Tip Shape Tapered , Tapered Tip,1 Mm Preshaped Tip, Microcone Tip , 0.018 Diameter Peripheral Floppy Wire ( Tip Shape Straight / Length 80,180,300Cm, Straight Tip , 0.025Diameter Peripheral Floppy Wire ( Tip Shape Straight / Length 80,260,300Cm,Straight Tip , 0.035 Diameter Peripheral Wire ( Tip Shape Straight / Length 180,260Cm, Straight Tip , 0.018 Diameter Peripheral Intermediate Wire ( Tip Shape Straight / Length 80,180,300Cm, Straight Tip , 0.018 Diameter Peripheral Standard Wire ( Tip Shape Straight / Length 80,180,300Cm, Straight Tip , 0.025 Diameter, Peripheral Intermediate Wire ( Tip Shape Straight / Length 260,180,300Cm, Straight Tip , 0.025Diameter, Peripheral Standard Wire ( Tip Shape Straight / Length 260,180,300Cm) ,Straight Tip , 195Cm-Length, Hydrophilic Coating-35Mm, 0.014Diameter, (Tipload-12G ),Straight Tip/ J Tip , Hydrophilic Coating-35Mm, 300Cm-Length, 0.014Diameter, (Tip Load 12G),Straight Tip/ J Tip , 195Cm-Length, Hydrophilic Coating-33Mm, 0.014Diameter, Stainless Steel Coil Length-26Mm, Floppy & Standard, J Tip , Hydrophilic Coating-33Mm, 300Cm-Length, 0.014Diameter, Stainless Steel Coil Length-26Mm, Floppy & Standard,J Tip , 195Cm-Length, Hydrophilic Coating-27Mm, 0.014Diameter, With Polymer Cover, Floppy, Intermediate, Standard,Straight Tip/ J Tip , Hydrophilic Coating-27Mm, 300Cm-Length, 0.014Diameter, With Polymer Cover, Floppy, Intermediate, Standard,Straight Tip/ J Tip , 185Cm-Length, Hydrophilic Coating-40Mm, 0.014Diameter, Stainless Steel Coil Length-2Cm, Floppy, Intermediate, Standard,Straight Tip/ J Tip , Hydrophilic Coating-40Mm, 300Cm-Length, 0.014Diameter, Stainless Steel Coil Length-2Cm, Floppy, Intermediate, Standard,Straight Tip/ J Tip , Fda Approved Nitinol Wire With Soft & A Traumatic Tip With Hydrophilic Coating At The Distal End & Hydrophobic At The Proximal End Core To Tip Design, 0.8 G Tip Load,Straight Tip/ J Tip , Extra Support Wire Guide For Neonatal Interventions: Nitinol Core, Pte Coating , Flexible Platinum Tip. 1:1 Torque Control. 014 And 018 Inch, 180,270 And 300 Cm Lenth. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Ptfe Guidewire :018, 021,025 Inch, Regular And Exchange Length , Fda Approved Nitinol Wire With Soft & A Traumatic Tip For Excellent Torque And Tip Control With .9G Tip Load, Stainless Steel, Straight Tip/J Tip , Fda Approved Peripheral Guide Wire For Cto, Stainless Steel With Microglide Coating , 4.8 To 13 Gm Tip Load ,190,300Cm Length , Doc Extension 0.14-0.018 X 145 Cm , Can Be Detached After Use, Designed To Provide The Necessary Length To Allow The Exchange Of One Cathether For Another While Maintaining The Position Of The Guide Wire In The Artery , Embolic Protection Devices , Heparin Coated , Braided Nitinol Filter With Gold -Tungsten Loop, 3-6Mm Lumen Size Distal Embolic Protection Device For Svg Interventions, 0.014,Wire Length: Otw/Rx: 190/320 Heparin Coated Filter Size: 3-6Mm , 0.018 Wire, Braided Nitinol Heparin Coated Filter With Gold -Tungsten Loop, 3-7Mm Lumen Size Distal Embolic Protection Device For Carotid Interventionscompatible Vessel Diameter-2-7Mm, Heparin Coated Filter , Braided Nitinol Heparin Coated Filter With Gold -Tungsten Loop, 0.018 Wire, 3-7Mm Lumen Size Distal Embolic Protection Device For Lower Limb Interventions,Compatible Vessel Diameter-2-7Mm, Heparin Coated Filter , Polyurethane Filter Pore Size-110 Micron With Nose Cone, 2.25-3.5F Lumen Size Distal Embolic Protection Device For Carotid Interventions,Wire Length: Otw/Rx: 190/300 Filter Size: 3-7F , 3.5-5.5F Lumen Size, Polyurethane Filter Pore Size-110 Micron With Nose Cone, Distal Embolic Protection Device For Carotid Interventions,Wire Length: Otw/Rx: 190/300 Filter Size: 3-7F , Guidewire With 90 0 Rotated Filter Basket With Obturator, Pore Size 150?M Distal Embolic Protection System,Compatible Vessel Diameter-3.25-7Mm , Self Centering Umbrella Design Filter With 8 Nitinol Struts, Emboli Capture Guide Wire System For Carotid Interventions,Compatible Vessel Diameter - 3-7.5Mm , Barewire Filter Delivery Wire Type Distal Protection Device For Coronary Interventions, Unconstrained Filter Diameter - 5.0Mm,Compatible Vessel Diameter - 2.5-4.8 Mm,With 120Um Pore Size , Barewire Filter Delivery Wire Type Distal Protection Device For Peripheral Interventions, Unconstrained Filter Diameter -7.2Mm, Compatible Vessel Diameter - 4.0-7.0 Mm , Polethylene Terephthalate Type Filter Distal Embolic Protection Device,Compatible Vessel Diameter-3.5 -7Mm , Ptfe Type Distal Protection Device, Filter With 100 Micron Poresand Hydrophilic Heparin Coating With Diamond Frame,Distal Protection Device -Filter , Proximal Cerebral Protection Device,Reference Common Carotid Artery Diameter - 5-13 Mm , Inflation Devices , Squeeze Handle With Prime Lock Inflation Device,Pressure Range: 0-30 / Barrel Volume: 20 Ml , Ordinary Handle Latch Type Inflation Device,-Pressure: 0-30, , Inflation Device, Piston Handle Type Intra-Cam Locking Mechanism,Barrel Volume-20Ml, Pressure Range: 0-30 , High Pressure Inflation Device Piston Handle With Finger Latch Mechanism,Barrel Volume- 20Ml, 0-30 , Fda Approved Inflation Device With 20 To 30 Atmosphere , Ce Approved Inflation Device , Special Inflation Device For High Pressure(55 Atm). Swiss Made, High Resolution , Inflation Device Maximum Pressure Of 30 Atm, 20Ml Clear Syringe Barrel With Smooth Moving Plunger,Self Locking Mechanism For Easy Locking As Well As Gradual And Rapid Pressure Release Ergonomic Handle And Precision Manometer. , Y- Connectors , Silicon Valve Material Type Y Connector,Bonded Extension Tube Length 20Cm, Push-Pull Type Hemostatic Valve , Ordinary Y Connector,Bonded Extension Tube 25Cm, Push-Pull Type Hemostatic Valve , Rotating Y Connector With 2 Way Adjustable Valve,Rotating Y-Connector/2-Way Adjustable Valve , Rotating Double Y Connector With 3 Way Adjustable Valve,Rotating Double Y-Connector/3-Way Adjustable Valve , High Pressure Resistance Y Connector ,Pressure Resistance Of Atleast 8 Atm, Push Pull Type, Inner Lumen Diameter-0.025, Guidewire Compatibility - 0.010 - 0.014 , Fda Approved Y Connector , Fda Approved Effectively Minimizes Blood Loss Alomost Nil And Provides A Smooth Channel For Interventional Device Delivery. Comes With One Fixed Valve And One Hemostatis Valve, Only Y Connector Wqith 10 F Bore Size, For Usage With A Variety Of Devices. Along With Intoducer Needle And Torque. From Japan. , Two In One Click And Screw Type Hemostatic Valve, 10Fr Inner Lumen , Ptca Y Connector 400 Kpa Leak-Proof Seal From Proprietary Designed Valve,Open And Close By Twisting,7F-9F Compatible Lumen Allowing Delivery Of Wide Range Of Devices And Torque And Introducer Fit 0.014-0.021 Guide Wire. , Vascular Access Devices , Hemostasis Valve :Hemostasis Assembly To Prevent Bleeding From Ends Of Catheters, With Facility Of Side Arm For Flushing And Injection. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , Puncture Needle(Radial) - Cook Model, , Puncture Needle(16G, 18G, 7Cm, 20Cm) , Puncture Needle(20G, 21G, 4Cm) , Micro Puncture Needle , Radial Sheath Without Nitinol Guide Wire, 4F- 6F/ Length 5-7Cm - Wire Length 45Cm, Wire Dimension0.025 , Radial Sheath 11 Cm Long,Size-4-6F, Length - 11Cm, Guidewire-0.021-0.025, , Radial Sheath 5& 7.5Cm Long,Size-4-6F, Length - 5 & 7.5Cm, Guidewire-0.021 , Fda Approved Radial Sheath 7 Cm Long Size Ranging From 4Fr To 7Fr, Length 7- 11Cm, Guidewire-0.021, , Ce Approved Radial Sheath 7 Cm Long Size Ranging From 4Fr To 7Fr, Length 7- 11Cm, Guidewire-0.021, , Pmda Approved Radial Sheath With Nitinol Guide Wire - Sheath Size Ranging From 6F,Length Ranging From 7Cm - Wire Length 45Cm, Wire Dimension0.025,Cross-Cut Haemostasis Valve Effectively Avoids Blood Reflux And Air Aspiration , Radial Sheeth 10Cm Long, Guide Wire 0.025(Plastic) With Unique Thin Wall Structure For Perform Procedure With Out Upsizing To A Large Sheath With International Terumo Quality. , Ts Femoral Sheath: 11 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire,6F , Ts Femoral Sheath: 23 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire,6F , Femoral Sheath-Adult 0.035 Inch Guide Wire,4-9 F Size , 25Cm Long, Size Femoral Sheath Size Ranging From 6F ,With Guide Wire , 25 Cm Long Femoral Sheath Without Guide Without Wire But Compatible With 0.038 Wire,10-14 F , 13-80 Cm Long, Large Valve Femoral Sheath,9-18 F , 5-23 Cm Long, Radial Sheath With 0.018 Inch Guide Wire,4-6 F , 5-45 Cm Long, Small Valve Femoral Sheath,4-8 F , 90 Cm Long, Brite Tip Interventional Sheath ,4-11 F , 23 Cm Long Input Ts Femoral Sheath With 0.038 Inch Guide Wire,5-11 F , Pediatric Long Sheaths : Long Guiding Sheaths With Hemostasis Valve , Hydrophilic Coating And Radio Opaque Band, All Available French Sizes Including 4 And 5 Fr , All Curves . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety , 28 Cm Long, Sentrant Introducer Sheath With Hydrophilic Coated Guide Wire,12-26 F , Prelude Act Sheathintroducer,4.5-8.5F , Prelude Ease Hydrophilic Femoralsheath,4-7F , 16Cm-45Cm Long Adelante Peelaway Femoralsheath ,6-12.5F , 4Cm-6Cm Long Femoral Sheath With 0.021 Inch Guide Wire,10-25F , 5Cm-35Cm Long Ultimum Femoral Sheath,4F-22F , 5.5Cm Long Femoral Sheath,4F-11F Size , 10Cm Long Femoral Sheath -Pediatric, 4F-11F Size , 11Cm Long Femoral Sheath,4F-8F Size , 23Cm Long Femoral Sheath,4F-8F Size , 23Cm Long, Femoral Sheath,9F-11F Size , Femoral Sheath 11 Cm Long Size Ranging From 6F, Length - 11Cm, Guidewire-038, Kink-Resistant Cannula Design Integrating A Soft, Flexible Inner Layer With A Stiffer Outer Layer Designed To Increase Bendability And Support, And Decrease Kinking. , Femoral Sheeth 11 Cm Long Size Ranging From 7F, Length - 11Cm, Guidewire-038, Kink-Resistant Cannula Design Integrating A Soft, Flexible Inner Layer With A Stiffer Outer Layer Designed To Increase Bendability And Support, And Decrease Kinking. , Long Metalic Sheeth Flexible And Kink Resistant Length :45Cm & 7F , Long Guiding Sheath With Coil - Reinforced Construction For Kink Resistance, With Ptfe Coated Large Lumen With Hydrophilic Coating And Radio - Opaque Band At The Tip, 4 To 12 Fr Sizes, All Available Tip Curves(Straight , Mp, Rdc, Cobra), Lengths 45, 55, 70, 110 Cms. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety,Long Sheath For Paediatric Procedures , Long Guiding Sheaths With Hemostasis Valve , Hydrophilic Coating And Radio Opaque Band, All Available French Sizes Including 4 And 5 Fr , Mullins Curve And Childrens Hospital Of Boston Curve. . Internationally Accepted Cook Quality And Equal Performance Needed For Patient Safety,Long Sheath - Small Diameter For Neonatal And Paediatric Procedures , Straight Hub , Fep Polymer , Radio Opaque , 16-20 G , Puncture Needle , Diagnostic Guidewires , Hydrophilic Guide Wire, Black,(0.018 - 0.038 X 80 Cm - 180Cm), Angled / Straight Tip Type , Hydrophilic Guide Wire, Black,(0.018 - 0.038 X 260 Cm), Angled / Straight Tip Type , Pdma Approved Hydrophilic Guide Wire,(0.018 - 0.038 X 80 Cm - 180Cm), Angled / Straight Tip Type , Pdma Approved Hydrophilic Guide Wire,(0.018 - 0.038 X 260 Cm), Angled / Straight Tip Type , 150Cm Hydrophilic Guide Wire, Blue,(0.018 - 0.038 X 80 Cm - 180Cm), Angled / Straight Tip Type , Exchange Length Hydrophilic Guide Wire, Blue,(0.018 - 0.038 X 260 Cm), Angled / Straight Tip Type , Diagnostic Guide Wire Single Length ,(0.018 - 0.038 X 80 Cm - 180Cm), Angled / Straight Tip Type , Diagnostic Guide Wire,(0.018 - 0.038 X 260 Cm), Angled / Straight Tip Type , Ptfe Coated Guidewire,(0.018 - 0.038 X 80 Cm - 180Cm), Angled / Straight Tip Type , Ptfe Coated Guidewire,(0.018 - 0.038 X 260 Cm), Angled / Straight Tip Type , Amplatz Wire,Lengths- 260, 300Cm, Tip - Straight/Shapable, 0.035 , Amplatz Wire,Lengths- 150Cm, Tip - Straight/Shapable, 0.035 , Amplatz Wire,Super Stiff,Lengths- 260, 300Cm, Tip - Straight/Shapable, 0.035 , Amplatz Wire,Super Stiff,Lengths- 150Cm, Tip - Straight/Shapable, 0.035 , Amplatz Wire,Extra Stiff,Lengths- 260, 300Cm, Tip - Straight/Shapable, 0.035 , Amplatz Wire,Extra Stiff,Lengths- 150Cmcm, Tip - Straight/Shapable, 0.035 , Snares , 2.3 - 3F Size Coronary Microsnare,Length 150 , 175Cm , 3.2F Size Coronary Snare,Length-150 Cm , 4,6F Size Coronary Snare,Length- 102 Cm , 6-7 F Size Coronary Snare,Length- 100 Cm , Catheter Outside Diameter:4F-6F,Catheter Length:48Cm-102Cm , 3 Loop Snare All Size , Peripheral Snare,Size: 9-11 F / Length: 63,58Cm. , Interventions For Congenital/Structural Heart Disease , Balkin Sheath,5.5F-7F,Length -40, 45Cm , Mullins Sheath (Pediatric),6F-9F , Mullins Sheath ,10F- 14F , Nih Catheter,4F - 7F , Goodale - Lubin Catheter,4F - 7F , Pig Tail Catheter,4F - 6F , Berman Angiographic Catheter,5F - 7F , Swan-Ganz Wedge Pressure Catheter,5F - 7F , Sapien Xt Trans Catheter Heart Valve With Ascendra Delivery System,Transapical Delivery System (Tavi)-24-26 F , Sapien Xt Trans Catheter Heart Valve With Ascendra Delivery System,Transfemoral Access (Tavi)-16,18,20 F , Sapien Xt Trans Catheter Heart Valve With Ascendra Delivery System,Transfemoral Access (Tavi)-14,16F , Corevalve Transcather- Aortic Valve Replacement System,18 F Self Expanding ( Tavi) , Melody Transcather Pulmonary Valve ,22 F Balloon Expandable( Tavi) , Transcatheter Aortic Valve Replacement System : Navigator Balloondual Stopper System Expandablevalve Materialbovine Pericardium Tri-Leaflet On A Nickel-Cobalt Alloy Framevalve ,Hybrid Honeycomb Cell Designdelivery System. 0.035 Guidewire Compatible And Catheter Length Of 120 Cm, Diameters: 20 Mm, 21.5 Mm, 23 Mm, 24.5 Mm,26 Mm, 27.5 Mm, 29 Mm , General Items , Iabp Pressure Cable And Ecg Cable Set :Iabp Pressure Cable And Ecg Cable Set Suitable For Arrow Machine , Iabp Balloon All Size Compatible With Arrow Autocat 2 , Helium Cylinder For Iabp, Arrow Compatible , Ffr Wire , Ffr Connecting Cable , Ffr Wire - 0.014With Medium Weight Support , Hydrophilic Coating ,Flat Corewire Design ,High -Fidelity Sensor Technology ,Radio Opaque Tip,Frequency Range -2.4000-2.4835Ghz (Ism Band ),Pressure Range -30To +300Mmhg , Ffr Wire Compatible With Ilumien Optis , Ffr Wire Compatible With Volcano , Ivus Catheter For Volcano , 3 D Oct Catheter, , Dragon Fly Optis /Duo Oct Imaging Catheter :Compatible With Ilumein Optis, ,Provide Continuous Calibration Throughout Pullback ,,Pull Back Lengh -54 (High Resolution ) 75 (Survey )Mm ,Imaging Up 180Frames Per Sec ,3 Radio Opaque Markeres At The Distal Tip ,Imaging Lens 50Mm Proximal ,2.7F Crossing Profile ,Compatible With 0.014&6F Guide Catheter , Rotablation Set, , Rotablation Burr, , Rota Wire, , Ivl Catheter , Dual Lumen Catheter, , Embolization Coil For Iliac Artery , Detachable Coil System, , Coil Detacher/Bioptome Cable, , Micro Catheter For Neuro Intervention, , Neuro Wires, , Neuro Balloons, , Cable Set, , Electrophysiology , Fda/Ce Approved Single Chamber Rate Responsive Promri Pacemaker (Vvir Mri) 3 Tesla Mri (Full-Body),10 Years Flat Warranty,Small Size - 10 Cement Concrete Volume, Light Weight - 20.8G Weight, Short Length - 48 Mm Length , Fda/Ce Approved Single Chamber Rate Responsive Promri Pacemaker (Vvir Mri) 3 Tesla Mri (Full-Body),Mri Autodetect (Unique),Rf Telemetry,Life Time Warranty, Small Size - 10 Cement Concrete Volume,Light Weight - 20.8G Weight,Short Length - 48 Mm Length , Single Chamber Non Rate Responsive Mri Compatible Pacemaker With 10 Years Replacement Warranty (A.)Multi-Programmable Single Chamber Mri Compatible Pacemaker. (B.) Option Of Active And Passive Fixation Is-1 Lead With All Accessories. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) Pacemaker Should Have International Replacement Warranty. (F.) Product Should Be Approved By Us Fda/Ce Or Dcgi , Mri (Full Body 1.5 And 3T Mri ); Vvi; Limited Warranty ; Capture Management ; , Single Chamber Rate Responsive Mri Compatible Pacemaker With 7 Years Replacement Warranty (A.)Multi-Programmable Rate Responsive Single Chamber Mri Compatible Pacemaker. (B.) Option Of Active And Passive Fixation Is-1 Lead With All Accessories. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) Pacemaker Should Have International Replacement Warranty. (F.) Product Should Be Approved By Us Fda/Ce Or Dcgi , Mri (Full Body 1.5 And 3T Mri ); Vvir; Limited Warranty ; Capture Management ;Mri Surescan Timeout , Mri (Full Body 1.5 And 3T Mri ); Vvir; Life Time Warranty ; Capture Management ; , Single Chamber Rate Responsive 3 T Mri Pacemaker With Rf Enable And Home Monitoring Feature With Life Time Warranty (A.)Multi-Programmable Rate Responsive Single Chamber 3 T Mri Compatible Pacemaker. (B.) Option Of Active And Passive Fixation Is-1 Lead With All Accessories. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) Intra Thoracic Impedance Based Heart Failure Monitoring. (F.) With Life Time Replacement Policy. (G.) Pacemaker Should Have Wireless Radio Frequency Enbabled Telemetery For Programmer And Home Transmeter. (H) Product Should Be Approved By Us Fda/Ce Or Dcgi , Single Chamber Rate Responsive Promri Pacemaker (Vvir Mri), A) 1.5 Tesla Mri (Full-Body), B) 10 Years Flat Warranty, C) Small Size 10Cc , Single Chamber Rate Responsive Promri Pacemaker (Vvir Mri) , A) 3 Tesla Mri ( Full-Body), B) Mri Autodetect (Unique), C) Rf Telemetry, D) Small Size 10Cc,F) Life Time Warranty, G) Fda Approved , Single Chamber Rate Responsive Promri Pacemaker (Vvir Mri), A) 3 Tesla Mri ( Full-Body),B) Mri Autodetect (Unique),C) Rf Telemetry,H) Home Monitoring,I) Fda Approved , Single Chamber Rate Responsive Promri Pacemaker (Vvir Mri),A) 3 Tesla Mri ( Full-Body),B) Mri Guard 24*7 (Unique),C) Rf Telemetry,D) Physiological Sensor - Cls (Unique) , Mri (Full Body 1.5 And 3T Mri ); Vvir; Limited Warranty ; Capture Management ; , Dual Chamber Non Rate Responsive Full Body Mri Pacemaker (A.)Multi-Programmable Non Rate Responsive Full Body Mri Compatible Dual Chamber Pacemaker. (B.) Option Of Active And Passive Fixation Is-1 Lead With All Accessories. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) With 10 Years Warranty Replacement Policy. (F.) Product Should Be Approved By Us Fda/Ce , Dual Chamber Rate Responsive Full Body Mri Pacemaker With 7 Year Warranty (A.)Multi-Programmable Rate Responsive Full Body Mri Compatible Dual Chamber Pacemaker. (B.) Atrial And Ventricular Endocardial Leads Both Active And Passive Fixation Is- 1 Bipolar And Unipolar As Per Clinical Need. (C.) With At Least 10 Year Replacement Warranty. (D.) Product Should Be Approved By Us Fda/Ce , Dual Chamber Rate Responsive Full Body 3 T Mri Pacemaker With 10 Year Warranty (A.)Multi-Programmable Non Rate Responsive Full Body Mri Compatible Dual Chamber Pacemaker. (B.) Atrial And Ventricular Endocardial Leads Both Active And Passive Fixation Is-1 Bipolar And Unipolar As Per Clinical Need. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) With 10 Years Warranty Replacement Policy. (F.) Product Should Be Approved By Us Fda/Ce , Dual Chamber Rate Responsive Full Body 3 T Mri Pacemaker With Life Time Warranty (A.)Multi-Programmable Non Rate Responsive Full Body 3 T Mri Compatible Dual Chamber Pacemaker. (B.) Atrial And Ventricular Endocardial Leads Both Active And Passive Fixation Is-1 Bipolar And Unipolar As Per Clinical Need. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) With Life Time Warranty Replacement Policy. (F.) Product Should Be Approved By Us Fda/Ce , Dual Chamber Rate Responsive Full Body 3 T Mri Pacemaker With Life Time Warranty And Rf Enable And Home Monitoring Feature With Lfe Time Warranty (A.)Multi-Programmable Rate Responsive Dual Chamber 3 T Mri Compatible Pacemaker. (B.) Atrial And Ventricular Endocardial Leads Both Active And Passive Fixation Is-1 Bipolar And Unipolar As Per Clinical Need. (C.) Auto Capture Output Management Software For Battery Optimization. (D.) Lead Polarity Switch (E.) Intra Thoracic Impedance Based Heart Failure Monitoring. (F.) With Life Time Replacement Policy. (G.) Pacemaker Should Have Wireless Radio Frequency Enbabled Telemetery For Programmer And Home Transmeter. (H.) Product Should Be Approved By Us Fda/Ce , Dual Chamber Rate Responsive Promri Pacemakers(Ddd Mri), A) 1.5 Tesla Mri (Full -Body), B) 8 Years Flat Warranty, C) Fda Approved, D) Small Size 11Cc, E) Weight 23.2G , Dual Chamber Rate Responsive Promri Pacemakers(Dddr Mri), A) 1.5 Tesla Mri (Full -Body),B) 8 Years Flat Warranty,C) Fda Approved,D) Small Size 11Cc,E) Weight 23.2G , Dual Chamber Rate Responsive Promri Pacemakers(Dddr Mri),A) 3 Tesla Mri (Full-Body),B) Mri Autodetect (Unique),C) Rf Telemetry,D) Life Time Warranty,E) Small Size 11Cc,F) Weight 23.2G , Dual Chamber Rate Responsive Promri Pacemakers(Dddr Mri), A) 3 Tesla Mri (Full-Body), B) Mri Autodetect (Unique),C) Rf Telemetry,D) Life Time Warranty,G) Home Monitoring,H) Fda Approved , Dual Chamber Rate Responsive Promri Pacemakers(Dddr Mri), A) 3 Tesla Mri (Full-Body), B) Mri Autodetect (Unique),C) Rf Telemetry,D) Life Time Warranty,G) Home Monitoring,H) Fda Approved,I) Physiological Sensor-Cls (Unique) , Dual Chamber Rate Responsive Promri Pacemakers(Dddr Mri), A) 3 Tesla Mri (Full-Body), B) Mri Autodetect24*7 (Unique),C) Rf Telemetry,D) Life Time Warranty,G) Home Monitoring,H) Fda Approved,I) Physiological Sensor-Cls (Unique) , Dual Chamber Rate Responsive Promri Pacemakers(Dddr Mri), A) 3 Tesla Mri (Full-Body), B) Mri Autodetect24*7 (Unique),C) Rf Telemetry,D) Life Time Warranty,G) Home Monitoring,H) Fda Approved,I) Physiological Sensor-Cls (Unique), I) Lbba Pacing, J) Atrial Anti-Tachycardia Pacing , Mri (Full Body 1.5 And 3T Mri ); Ddd ; Limited Warranty ;Capture Management ;; Reduced Vp+ ; App , Mri (Full Body 1.5 And 3T Mri ); Dddr ; Limited Warranty ;Capture Management ; ; Reduced Vp+; App , Mri (Full Body 1.5 And 3T Mri ); Dddr; Life Time Warranty ; Mvp; Rdr ; App , Mri (Full Body 1.5 And 3T Mri ); Ddd ; Limited Warranty ;Capture Management , Mri (Full Body 1.5 And 3T Mri ); Dddr Limited Warranty ; Reactive Atp ; Bluesync™ Technology; Rdr; Mvp ; App ; , Permanent Pacemaker - Ddd/Dddr: Physiological Pacing Leads(4.1Fr)Body & Accessories ,Multiprogrammable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturermanagement With Remote Monitoring Capabilities For Cardio Neurogenic Patients.1.5/3T Full Bodymri Compatible Pacemaker: With Limited Warranty (1 Pg+2 Lead+2 Sheath+1 His Catheter) , Permanent Pacemaker - Ddd/Dddr: Physiological Pacing Leads(4.1Fr) Body & Accessories ,Multiprogrammable Rate Responsive Dddr Pacemaker With Rate Drop Response, Ra And Rv Capturermanagement With Remote Monitoring Capabilities For Cardio Neurogenic Patients.1.5/3Tfull Body Mri Compatible Pacemaker: With Life Time Warranty (1 Pg+2 Lead+2 Sheath+1 His Catheter) , Mri (Full Body 1.5 And 3T Mri ); Dddr; Life Time Warranty ; Reactive Atp ; Bluesync™ Technology; Rdr ; Mvp ; App; , Icd: Single Chamber Non Mri, Single Chamber Icd In Df1/Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert, T Wave Oversensing With Three Zone Tachy Arrythmia Programmability And Monitor Zone.5 Year Full Warranty +3 Year Conditional Warrenty , Icd: Dual Chamber Non Mri,Dual Chamber Icd In Df1/Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert, T Wave Oversensing With Three Zone Tachy Arrythmia Programmability And Monitor Zone, With Algorithm To Reduce Unnecessary Rv Apical Pacing.Smart Shock Technology. 4 Year Full Warranty +3 Year Conditional Warrenty , Fda/Ce Approved Dual Chamber Icd Promri,1.5 Tesla Mri (Full-Body), Smart Detection,Morphmatch,Rf Telemetry,5 Years Flat Warranty , Icd: Dual Chamber 1.5/3 T-Full Body Mri,Smart Shock Technology,Dual Chamber Icd In Df1/Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics, Lead Integrity Alert.With Three Zone Tachy Arrythmia Programmability And Monitor Zone.Physiocurve Design.4 Year Full Warranty +3 Year Conditional Warrenty , Icd :Single Chamber 1.5/3 T1.5/3 T-Full Body Mri,Smart Shock Technology,Physiocurve Design,Withtruaf™ Detection Algorithm.Single Chamber Icd In Df1/Df4 Connection With Shock Reduction Technology, Atp During And Before Charging, Hf Diagnostics And Alert, Af Diagnostic,With Three Zone Tachy Arrythmia Programmability And Monitor Zone With Physiological Shape For Low Skin Pressure.5 Year Full Warranty +3 Year Conditional Warrenty , Single Chamber Icd Promri, A) 1.5 Tesla Mri (Full Body),B) Rf Telemetry C) Morphmatch D) 5 Years Flat Warranty E) Home Monitoring F) Fda Approved , Single Chamber Icd Promri A) 3 Tesla Mri (Full Body),B) Rf Telemetry,C) Morphmatch, D) Ultrathin (10Mm),E) Home Monitoring,G) 10 Years Flat Warranty,H) Fda Approved , Single Chamber Icd Promri A) 3 Tesla Mri (Full Body),B) Rf Telemetry,C) Morphmatch, D) Mri Autodetect (Unique) (10Mm),E) Home Monitoring,G) 10 Years Flat Warranty,H) Fda Approved , Single Chamber Icd Promri A) 3 Tesla Mri (Full Body),B) Rf Telemetry,C) Morphmatch, D) Mri Autodetect (Unique) (10Mm),E) Home Monitoring,G) 10 Years Flat Warranty,H) Fda Approved, Ultrathin (10Mm) , Single Chamber Icd Vdd With Atrial Dipole Promri A) 3 Tesla Mri (Full-Body) B) Mri Autodetect (Unique) C) Atrial Sensing D) Smart Detection E) Morphmatch F) Rf Telemetry G) 13.5 Years Longevity H) 10 Years Flat Warranty I) Home Monitoring J) Fda Approved , Single Chamber Icd Vdd With Atrial Dipole Promri A) 3 Tesla Mri (Full-Body) B) Mri Autodetect (Unique) C) Atrial Sensing D) Smart Detection E) Morphmatch F) Rf Telemetry G) 13.5 Years Longevity H) 10 Years Flat Warranty I) Home Monitoring J) Fda Approved,Ultrathin , Single Chamber Icd Vdd With Atrial Dipole Promri A) 3 Tesla Mri (Full-Body) B) Mri Autodetect (Unique) C) Atrial Sensing D) Smart Detection E) Morphmatch F) Rf Telemetry G) 13.5 Years Longevity H) 10 Years Flat Warranty I) Home Monitoring J) Fda Approved, Csp , Dual Chamber Icd Promria) 1.5 Tesla Mri (Full-Body)B) Smart Detectionc) Morphmatchd) Rf Telemetrye) Home Monitoringf) Fda Approved , Dual Chamber Icd Promri A) 3 Tesla Mri (Full-Body) B) Smart Detection C) Morphmatch D) Rf Telemetry E) Ultrathin F) 12 Years Longevity G) 8 Years Flat Warranty H) Home Monitoring I) Fda Approved , Dual Chamber Icd Promri A) 3 Tesla Mri (Full-Body) B) Smart Detection C) Morphmatch D) Rf Telemetry E) Ultrathin F) 12 Years Longevity G) 8 Years Flat Warranty H) Home Monitoring I) Fda Approved Mri Autodetect (Unique) , Dual Chamber Icd Promri A) 3 Tesla Mri (Full-Body) B) Smart Detection C) Morphmatch D) Rf Telemetry E) Ultrathin F) 12 Years Longevity G) 8 Years Flat Warranty H) Home Monitoring I) Fda Approved, Mri Autodetect (Unique), Ultrathin , Dual Chamber Icd Promri A) 3 Tesla Mri (Full-Body) B) Smart Detection C) Morphmatch D) Rf Telemetry E) Ultrathin F) 12 Years Longevity G) 8 Years Flat Warranty H) Home Monitoring I) Fda Approved, Mri Autodetect (Unique), Csp , Mri (Full Body 1.5 And 3T Mri ) ; Carelink Connectivity ; Lead Integrity Alert (Lia);3 Detection Zones ;Svt Discriminators Wavelet, Stability, Onset-Icd S , Mri (Full Body 1.5 And 3T Mri ) ; Carelink Connectivity ; Lead Integrity Alert (Lia);3 Detection Zones ;Svt Discriminators Wavelet, Stability, Onset,Pr Logic-Icd D , Mri (Full Body 1.5 And 3T Mri ) ; Carelink Connectivity ; Lead Integrity Alert (Lia);3 Detection Zones ;Svt Discriminators Wavelet, Stability, Onset,Pr Logic; Atrial Atp With Reactive Atp ; Bluesync™ Technology ;Maximum Delivered Energy 40 J-Icd S , Mri (Full Body 1.5 And 3T Mri ) ; Carelink Connectivity ; Lead Integrity Alert (Lia);3 Detection Zones ;Svt Discriminators Wavelet, Stability, Onset; Bluesync™ Technology ;Maximum Delivered Energy 40 J-Icd S , Mri (Full Body 1.5 And 3T Mri ) ; Carelink Connectivity ; Lead Integrity Alert (Lia);3 Detection Zones ;Svt Discriminators Wavelet, Stability, Onset,Pr Logic; Atrial Atp With Reactive Atp ; Bluesync™ Technology ;Maximum Delivered Energy 40 J-Icd D , Mri (Full Body 1.5 And 3T Mri ) ; Carelink Connectivity ; Lead Integrity Alert (Lia);3 Detection Zones ;Svt Discriminators Wavelet, Stability, Onset; (Af) Burden With Lorentz Plot-Icd S , Biventricular Pacemaker With Bipolar Lv Lead And Delivery System. (A.) Multi- Programmable Crtp. (B.) Artrial Ventricular Endocardial Leads Both Active And Passive Fixation Is-1 Bipolar And Unipolar As Per Clinical Need (C.) Bipolar Lv Lead With Full Delivery System (Cs Delivery Catheters) (D.) International Warranty. (E.) Product Should Be Approved By Usfda/Ce , Full Body Mri Compatible Biventricular Pacemaker With Quadripolar Lv Lead And Delivery System. (A.) Multi- Programmable Full Body Mri Compatible Crtp. (B.) Artrial Ventricular Endocardial Leads Both Active And Passive Fixation Is-1 Bipolar And Unipolar As Per Clinical Need (C.) Quadripolar Lv Lead With Full Delivery System (Cs Delivery Catheters) (D.) International Warranty. (E.) Product Should Be Approved By Usfda/Ce , Cardiac Resynchroization Therapy With Defibrillator With Bipolar Lv Lead And Df1 Difib Lead (A.) Multi Programmable Cardiac Resynchonization Therapy With Defibrillator (Crtd) With Bipolar Lv Lead And Df1 Difib Lead. (B.) Must Have At Least Morpholog Match Algorithmm Working Along With Onset Stability Algorithmm To Detect Ventricular Tachycardia. (C.) Bipolar Lv Lead With Cs Catherter All Size And Shapes. (D.) Active And Passive Fixation Cardioverter-Defibrillator Endocardial Df1 Leads As Per Clinical Need. (E.) Active And Passive Fixation Atrial Lead As Per Clinical Need (F.) Device Should Have 6 Year Warranty (Prorata Basis) (G.) Device Should Have Us Fda/Ce Or Dcgi Approval , Cardiac Resynchroization Therapy With Defibrillator With Bipolar Lv Lead And Df4 Difib Lead (A.) Multi Programmable Cardiac Resynchonization Therapy With Defibrillator (Crtd) With Bipolar Lv Lead And Df4 Difib Lead. (B.) Must Have At Least Morpholog Match Algorithm Working Along With Onset Stability Algorithm To Detect Ventricular Tachycardia. (C.) Quadripolar Lv Lead With Cs Catherter All Size And Shapes. (D.) Active And Passive Fixation Cardioverter-Defibrillator Endocardial Df4 Leads As Per Clinical Need. (E.) Active And Passive Fixation Atrial Lead As Per Clinical Need (F.) Device Should Have 6 Year Warranty (Prorata Basis) (G.) Device Should Have Us Fda/Ce Or Dcgi Approval , Caridac Resynchroniation Therapy With Defibrillator Full Body Mri Compatible With Df4 Difib Lead (A.) Multi Programmable Full Body Mri Campatible Cardiac Resynchronization Therapy With Defibrillator (Crtd) With Quadripolar Lv Lead And Df4 Difib Lead (B.) Must Have At Least Morphology Match Algorithm Working Along With Onset Stability Algorithm To Detect Ventricular Tachycardia. (C.) Quadripolar Lv Lead With Cs Catherter All Size And Shapes. (D.) Active And Passive Fixation Defib Endocardial Df4 Lead. (E.) Active And Passive Fixation Atrial Lead As Per Clinical Need (F.) Device Should Have 6 Year Warranty (Prorata Basis). (G.) Device Should Have Us Fda Or Dcgi Approval , Full Body Mri Caridac Resynchroniation Therapy Device (Crtd) With Quadripolar Lv Lead And Defibrillator Df4 Difib Lead With Option Of Pacing In Left Ventricule Simultaeously At Two Sites - Lv Multipoint Pacing (A.) Multi Programmable Full Body Mri Compatible Cardiac Resynchronization Therapy With Defibrillator (Crtd) With Quadripolar Lv Lead And Df4 Difib Lead (B.) Must Have At Least Morphology Match Algorithm Working Along With Onset Stability Algorithm To Detect Ventricular Tachycardia. (C.) Quadripolar Lv Lead With Cs Catherter All Size And Shapes. (D.) Active And Passive Fixation Defib Endocardial Df4 Lead. (E.) Active And Passive Fixation Atrial Lead As Per Clinical Need. (F.) Crtd Should Have Option Of Pacing Left Ventricule Simultaneously At Two Sites. (G.) Device Should Have 6 Year Warranty (Prorata Basis) (H.) Device Should Have Us Fda Or Dcgi Approval. , Non Mri ; Cardiosync Optimization Test ; Carelink Connectivity -Crtd Bipolar , Non Mri ;Cardiosync Optimization Test ; Carelink Connectivity ;Vectorexpress Lv Automated Test ; 16 Lv Pacing Vectors With Quadripolar Lv Screw Lead-Crtd Quard , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ;Vectorexpress Lv Automated Test ; 16 Lv Pacing Vectors With Quadripolar Screw Lv Lead ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Lead Integrity Alert (Lia)-Crtd Quard , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Lead Integrity Alert (Lia)-Crtd Bipolar , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ;Vectorexpress Lv Automated Test ; 16 Lv Pacing Vectors With Quadripolar Lv Screw Lead ; Atrial Atp With Reactive Atp ; Lead Integrity Alert (Lia); Adaptivcrt; Bluesync™ Technology ; Maximum Delivered Energy 40 J-Crtd Quard , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ; Atrial Atp With Reactive Atp ; Lead Integrity Alert (Lia); Adaptivcrt; Bluesync™ Technology ; Maximum Delivered Energy 40 J-Crtd Bipolar , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ;Vectorexpress Lv Automated Test ; 16 Lv Pacing Vectors With Quadripolar Lv Screw Lead ; Atrial Atp With Reactive Atp ; Lead Integrity Alert (Lia); Bluesync™ Technology;Maximum Delivered Energy 40 J-Crtd Quard , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ; Atrial Atp With Reactive Atp; Lead Integrity Alert (Lia); Bluesync™ Technology ;Maximum Delivered Energy 40 J-Crtd Bipolar , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Lead Integrity Alert (Lia) ; Adaptivcrt ;Bluetooth Wireless Telemetry-Crtd Bipolar , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ;Vectorexpress Lv Automated Test ; 16 Lv Pacing Vectors With Quadripolar Lv Screw Lead ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Bluetooth Wireless Telemetry-Crtp Quard , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Bluetooth Wireless Telemetry-Crtp Bipolar , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ;Vectorexpress Lv Automated Test ; 21 Lv Pacing Vectors With Quadripolar Lvscrew Lead ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Multiple Point Pacing ; Adaptivcrt ;Bluetooth Wireless Telemetry , Mri (Full Body 1.5 And 3T Mri ) ;Cardiosync Optimization Test ; Carelink Connectivity ; Atrial Atp With Reactive Atp ; Optivol 2.0 ; Lead Integrity Alert (Lia) ; Adaptivcrt ;Bluetooth Wireless Telemetry-Crtp Bipolar , Crt-P Bipolar Promri, A) 3 Tesla Mri (Full-Body),B Mri Autodetect (Unique) , C) Physiological Sensor -Cls (Unique),D) Rf Telemetry ,E) 6 Pacing Vectors ,F)13 Years Longevity ,H) Home Monitoring , I) Fda Approved, G) 5 Years Flat Warranty, , Crt-P Bipolar Promri, A) 3 Tesla Mri (Full-Body),B Mri Autodetect (Unique) , C) Physiological Sensor -Cls (Unique),D) Rf Telemetry ,E) 6 Pacing Vectors ,F)13 Years Longevity ,H) Home Monitoring , I) Fda Approved, G) 5 Years Flat Warranty,I) Lbba Pacing (Unique), J) Atrial Anti-Tachycardia Pacing (Aatp), K)Crt Autoadapt , Crt-P Quadripolar Promri, A) 3 Tesla Mri (Full-Body),B Mri Autodetect (Unique) , C) Physiological Sensor -Cls (Unique),D) Rf Telemetry ,E) 12 Pacing Vectors ,F)13 Years Longevity , I) Fda Approved, G) 5 Years Flat Warranty , Crt-P Quadripolar Promri, A) 3 Tesla Mri (Full-Body),B Mri Autodetect (Unique) , C) Physiological Sensor -Cls (Unique),D) Rf Telemetry ,E) 12 Pacing Vectors ,F)13 Years Longevity ,H) Home Monitoring , I) Fda Approved, G) 5 Years Flat Warranty, I) Lbba Pacing (Unique), J) Atrial Anti-Tachycardia Pacing (Aatp), K)Crt , Crtd Arc-Biannual Rate Contract Polar Promri, A) 1.5 Tesla Mri (Full-Body),B Mri Autodetect (Unique) , C) Rf Telemetry, D) 6 Pacing Vectors , E) 5 Years Flat Warranty, F) Fda Approved , Crtd Arc-Biannual Rate Contract Polar Promri, A) A) 3 Tesla Mri (Full-Body), B B) Smart Detection , C) Rf Telemetry, D) 6 Pacing Vectors ,E) Ultrathin F) 9.3 Years Longevity G) 6 Years Flat Warranty, F) Fda Approved , Crtd Arc-Biannual Rate Contract Polar Promri, A) A) 3 Tesla Mri (Full-Body), B B) Smart Detection , C) Rf Telemetry, D) 6 Pacing Vectors ,E) Mri Autodetect (Unique) F) 9.3 Years Longevity G) 6 Years Flat Warranty, F) Fda Approved , Crtd Arc-Biannual Rate Contract Polar Promri, A) A) 3 Tesla Mri (Full-Body), B B) Smart Detection , C) Rf Telemetry, D) 6 Pacing Vectors ,E) Mri Autodetect (Unique) F) 9.3 Years Longevity G) 6 Years Flat Warranty, F) Fda Approved, H) Csp, , Crtd Arc-Biannual Rate Contract Polar Promri, A) 3 Tesla Mri (Full-Body) B) Mri Autodetect (Unique), C) Smart Detection D) Rf Telemetry E) 6 Pacing Vectors F) Ultrathin G) 9.3 Years Longevity H) 6 Years Flat Warranty, I) Fda Approved , Crtd Arc-Biannual Rate Contract Polar Promri, A) 3 Tesla Mri (Full-Body) B) Mri Autodetect (Unique), C) Smart Detection D) Rf Telemetry E) 6 Pacing Vectors F)Crt Autoadapt G) Physiological Sensor -Cls (Unique) H) 9.3 Years Longevity I) 6 Years Flat Warranty I) Fda Approved , Crtd Quadripolar Promri, A) 1.5 Tesla Mri (Full- Body), B) Smart Detection, C) Rf Telemetry,D) 12 Pacing Vectors ,E) 5 Years Flat Warranty , F) Fda Approved, , Crtd Quadripolar Promri, A) 3 Tesla Mri (Full- Body), B) Smart Detection,C) Rf Telemetry D) 20 Pacing Vectors E) Ultrathin F) 9.3 Years Longevity G) 6 Years Flat Warranty H) Fda Approved , Crtd Quadripolar Promri, A) 3 Tesla Mri (Full- Body), B) Smart Detection,C) Rf Telemetry D) 20 Pacing Vectors E) Ultrathin F) 9.3 Years Longevity G) 6 Years Flat Warranty H) Fda Approved, I) Csp , Icd -Single Chamber Df4, Mri Compatible-Pg Only , Icd -Single Chamber Df1, Mri Compatible Pg Only , Icd -Dual Chamber Df4, Mri Pg Only , Icd -Dual Chamber Df1, Non-Mri Pg Only , Icd -Dual Chamber Df4, Mri Pg Only , Crt-D Pg Only , Crt-D Pg Only(Bipolar ) , Crt-D Pg Only ( Quadripolar) , Absorbable Antibacterial Envelope With Cardiac Implantable Electronic Devices (Cieds) , Leadless Pacemaker - Mri (Full Body 1.5 And 3T Mri ); Vvir , Leadless Pacemaker - Mri (Full Body 1.5 And 3T Mri ); Vdd , Physiological Pacing Leads- The Steroid-Eluting, Bipolar ,Mri Lead (Lengths Of 59, 69 And 74 Cm) , Slitter For Lv Guide Catheters , Fixed Shape Guide Catheters For Selectsecure ® , Leadless Pacemaker- Introducer Catheter , Peelable Percutaneous Lead Introducers (Pli) For Use With Transvenous Leads ; 7-9Fr , Guide Catheters For Left Heart Delivery ; Surevalveintegrated Valve , Delivery Catheter System For Sub Selection In A Wide Variety Of Patient Anatomies, Curved Tip ; Surevalve Integrated Valve , His Bundle Mri (Full Body 1.5 And 3T Mri ); Active; Screw-In ;Straight ; Bipolar , Ddd Tined Lead/Screw In Lead Mri,International Warranty-Life Time , Ddd Tined Lead/Screw In Lead Mri,Internationalwarranty-Minimum 10 Year , Physiological Pacing Lead Set(Lead+Sheath+Slitter+Peal Away Sheath) , Lv Lead Set Withaccesories , Lv Active Fixation Lead With Accessories , Antibiotic Envelope For Cied , Disposable Sterile Skin Stapler , Io Drape Extra Large(Size-90X45cm, Adhesive Area:60X45 Cm) , 5 F, 6Fflow Directed Temporary Pacing Lead With Balloon,8 Mm Balloon, Length 110Cm , 5F, 6F Ordinary Temporary Pacing Lead110cmlong ,2Mm Bipolar Electrodes , 5F Ordinary Temporary Pacing Lead,Length-105Cm, 110Cm, Electrode Spacing-15Mm,25Mm , 5F,6F,7F, Temporary Pacing Lead,100, 125Cm, Bipolar , Contrast Media(100Ml) , Contrast Media- Iohexol ,100Ml (300- 350Mg Iodine/Ml) , Contrast Media Non Ionic(Iso Osmolar)- Iohexol ,100Ml (300-350Mg Iodine/Ml) , Contrast Media- Iopromide,100Ml (300-350Mg Iodine/Ml) , Contrast Media- Iomeprol,100Ml (300-350Mg Iodine/Ml) , Contrast Media- Iopamidol,100Ml (300-350Mg Iodine/Ml) , Contrast Media- Ioversol,100Ml (300-350Mg Iodine/Ml) , Contrast Media (Dimer)- Iodixanol,100Ml (300-350Mg Iodine/Ml) , Contrast Media Non Ionic(Iso Osmolar) (Dimer)- Iodixanol,100Ml (300-350Mg Iodine/Ml) , Contrast Media (Dimer)- Ioxaglate,100Ml (300-350Mg Iodine/Ml) , Contrast Media(50-90Ml) , Contrast Media- Iohexol ,50-90Ml(300Mg Iodine/Ml) , Contrast Media- Iopromide,50-90Ml(300Mg Iodine/Ml) , Contrast Media- Iomeprol,50-90Ml(300Mg Iodine/Ml) , Contrast Media- Iopamidol,50-90Ml(300Mg Iodine/Ml) , Contrast Media- Ioversol,50-90Ml(300Mg Iodine/Ml) , Contrast Media (Dimer)- Iodixanol,50-90Ml(300Mg Iodine/Ml) , Contrast Media (Dimer)- Ioxaglate,50-90Ml(300Mg Iodine/Ml) , Miscellaneous Cath Lab Consumables , Pressure Bag Meter Gauge( Reusable) , Pressure Bag Meter Gauge , Pressure Transducer Compatible With Philips Cathlab System , Pressure Transducer Cable Compatible With Philips Cathlab System , Torque Device , 3 Port Manifold,Right Port, Halfbody, With On/Off Handle , 3 Port Manifold,Right Port, Halfbody, With On/Off Handle,With At Least 16Cm Length , Pressure Connector,100-200Cm , Pressure Connector For Pressure Injector , Button Switch Pencil For Electrocautery,Disposable Blade Electrode, Cord Length-3Mtrs , Cord For Bipolar Cautery Forceps, , Cord For Unipolar Cautery Forceps , Electropad For Cautery , Eto Reel / Disposable Kit , Eto Sterilization Reel 100Mmx200m , Eto Sterilization Reel 200Mmx200m , Eto Sterilization Reel 300Mmx200m , Eto Sterilization Reel 400Mmx200m , Eto Cartridge 100Gms Compatible With Pci , Cdsco Class A 0R B Approved Disposable Procedure Kit Contents- 50Gsm Surgeons Gown-2Nos 80Gsm Hand Towel-2Nos Trolly Sheet 200X160,80-100Gsm-1 Mopping Pad 30X30 8Ply-1 Angio Drape Water Repellent Material 50Gsm With 80Grams Under Pad. 30Gsm Warp Sheet 100X80-1 Shild Protection Cover 90 Micron-1 , Angiogram Kit (Item: 50Gsm Surgeons Gown - 2Nos, 80Gsm Hand Towel - 2Nos, Angio Drape, Table Sheet & Wrap Sheet) , Disposable Shild Protection Cover 90 Micron , Disposable Surgeons Gown 50Gsm , Double Sided Covered Type Lead0.5/0.25Mm Pb Apron Medium Size , Lead Apron , Lead Apron Skirt & Vest 0.5/0.25Mm Pb Type Medium Size , Lead Apron Skirt & Vest Type 0.5/0.25Mm Pb Large Size , Lead Apron Surgical Apron Type 0.5Mm Pb Large Size , Lead Apron Surgical Apron Type 0.5Mm Pb Extra Large Size , Lead Head Shield 0.25Mm Pb , Lead Protective Eyewear Sporty , Lead Protective Eyewear Front & Side , Thyroid Sheilds
Contract Date: May 19, 2026 Contract Value : ₹ 3.76 Crore
Boards / Undertakings / PSU No of Bidders 27
Kerala View Result →
19.
Defence #11095455 AOC
Tender For Provision Of Stabilizer And Insolation Transformer On Hard (Rcc) Surface With Armored Cable At Tru At Af Stn Bkt; 1 Supply, Installation testing and commissioning of Isolation transformer, 3 Phase ,50HZ 125 KVA capacity ,copper wound, oil cooled, class A insulation, powder coated metallic body, designed for input voltage 415+ 5%,output voltage rate 415 + 5%,Ratio 1;1, DYN-11, Delta star indoor type, min IP 42 with first filling of transformer oil as per IS 335 upto level, efficiency more than 95%. separate neutral bush for neutral to earth less than IV, with all standard accessories including digital ammeter , voltmeter , short cicuit protection , unbalance voltage protection, MCCB/MCB of suitable rating in incoming with by pass arrangementdigital type temperatures meter, cooling radiator, lifting hook earthing terminals – 2 Nos with MCCB for overload / short circuit protection bushing complete all as specified and directed . The transformer shall be confirming to IS: 1180: 2014 and shall comprise of the following:- (a) Rating and diagram plate. (b) Two earthing terminals in two side. (c) Lifting lugs .(d) Off circuit link board. (e) Base channel with Bi- directional Rollers. (f) Danger board (g) 100 mm dial type thermometer. (h) Cable entry boxes etc complete as reqd. (i) Plinth of PCC (1:3:6) type C-1 using 20mm graded stone aggregate for placing and supporting of Isolation transformer complete all as specified and directed.Make:- Vinetec/ Servostar/ Volina/ Indian Transformer and Electrical (Note:- E-N voltage should not be more than 2 Volts). 2 Supply Installation testing and commissioning ofServo controlled voltage stabilizer of capacity 160 KVA Confirming to BIS 9815: Part1:1994 reaffirmed 2009) Three Phase, 50 Hz, Naturally Oil cooled, indoor, for unbalanced load, Copper wound, metallic body with lifting hooks, digital display type, relay free smooth and silent operation including 1st filling of transformer oil up to level having following specification:-(a) Input voltage 300V-480V, (b) Output voltage stabilized at any designed/ desired voltage 415(+/-)1%(c ) No distortion in wave form.(d) Respond time not to exceed 20 mili seconds (e) Sensitivity(+/-) 1% (f) 8 Volt/second correction . (g) Efficiency more than 98% (h) Type of load 3Phase, unbalanced type (i) Digital display Volt meter on incoming & outgoing to measure phase & line voltage with selector switch and Ammeter (j) Over load and short circuit protections , (k) High & Low voltage cut off(l) By pass arrangement in case of emergency and Single phase prevention complete all as specified and directed (m) MCCB of suitable rating at incoming and outgoing Make:- Vinetec/ Servostar/ Volina/ Indian/ Transformer and Electrical . 3 Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation of poles, stays or for taking out/laying of cables and getting out in soft/loose soil complete all as specified and directed. 4 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in soft/loose soil complete all as specified and directed . 5 Removing excavated materials (soil) not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed. 6 M & L for sand cushioning to underground cable with clean dry Ganga river sand complete all as specified and directed. Note:- Punned thickness only shall be measured & Paid. 7 M & L for precast cable cover class LV type 1 flat size 250mm x 150mm x40mm, laid flat, dry butt jointed, laid lengthwise perpendicular to the axis of cable complete all as specified & directed. 8 Supplying, laying, connecting & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098(Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable gland, cable lugs, jointing, supporting clamp complete etc of size 185 sqmm 3.5 core complete all as specified and directed. Make - Polycab/Plaza/Havells/Finolex/ RR Cable. 9 Supplying, laying, connecting & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098(Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable gland, cable lugs, jointing, supporting clamp complete etc of size 120 sqmm 3.5 core complete all as specified and directed .Make - Polycab/Plaza/Havells/Finolex/RR Cable. 10 Supplying, laying, connecting & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098(Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable gland, cable lugs, jointing, supporting clamp complete etc of size 95 sqmm 3.5 core complete all as specified and directed. Make - Polycab/Plaza/Havells/Finolex/ RR Cable. 11 Supplying, laying, connecting & testing LT underground cable 1100 volts grade, XLPE insulated, PVC sheathed heavy duty, armoured with multi stranded aluminium conductor all as per IS 7098(Part-I) 1998, laid in trenches, ducts, pipes or on poles etc including cable gland, cable lugs, jointing, supporting clamp complete etc of size 50 sqmm 3.5 core complete all as specified and directed. Make - Polycab/Plaza/Havells/Finolex/ RR Cable. 12 Supply installing testing and commissioning factory made and tested, CPRIapprovedLT main feeder pillar indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 Volts, 3 phase 4 wire 50Hz AC supply system, conforming to IS - 5039, IP-54 class protection and made of 2mmCRCA mild steel sheet with 50mm x 50mm x6mm angleiron frame, hinged doors, front & rear opeing and lockingarrangement ( including provision of 65mm Godrej ( freedom) lock with 2 Keys) with necessary bus bar arrangment with insulated Aluminium bus barhaving current carrying capacity 1.5 times the rated current ratingfor phase & neutral, 4 strips 1.5 times of incoming rating on epoxy insulators, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for ACB/MCCB with suitable capacity of Aluminium bus bar strips including heat shrinkable sleeves,and providing extended bus bars with chamber arrangement for outgoing cables, copper control wiringofrequired size forinstruments and comprising of the following including necessary PCC in (1:2:4) type B1 using 20mm graded stone aggregate for platform of suitable size Comple all as specified and directed.Make- Power system & Control , Prestige , Sparsh Engineering , REW INCOMING MCCB 250 Amp 36 KA 4 Pole, 50 HZ Thermal - Magnetic Release - 01 No 13 Supply installing testing and commissioning factory made and tested, CPRIapprovedLT main feeder pillar indoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 Volts, 3 phase 4 wire 50Hz AC supply system, conforming to IS - 5039, IP-54 class protection and made of 2mmCRCA mild steel sheet with 50mmx 50mmx6mm angleiron frame, hinged doors, front & rear opeing and lockingarrangement ( including provision of 65mm Godrej ( freedom) lock with 2 Keys) with necessary bus bar arrangment with insulated Aluminium bus barhaving current carrying capacity 1.5 times the rated current ratingfor phase & neutral, 4 strips 1.5 times of incoming rating on epoxy insulators, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for ACB/MCCB with suitable capacity of Aluminium bus bar strips including heat shrinkable sleeves,and providing extended bus bars with chamber arrangement for outgoing cables, copper control wiringofrequired size forinstruments and and comprising of the following including necessary PCC in 1:2:4 type B1 using 20mm graded stone aggregate for platform of suitable size Comple all as specified and directed.Make- Power system & Control , Prestige , Sparsh Engineering , REW INCOMING MCCB 250 Amp 25 KA 4 Pole, 50 HZ Thermal - Magnetic Release - 01 No OUT GOING(i) MCCB 200 Amp 25 KA 4 PoleThermal - Magnetic Release-01 No. (ii) MCCB 125 Amp 16 KA 4 Pole Thermal - Magnetic Release-01 No.(iii) Digital Ammeter 0-100 Amp with built in selector switch - 01 No.(iv) Digital Voltmeter 0-500 Volt with built in selector switch - 01 No.(v) CT - 250/5 - 1 Set of three.(vi) Indicating lamp (RYB)-03 nos 14 Supply installing testing and commissioning factory made and tested, CPRIapprovedLT main feeder pillar Outdoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 Volts, 3 phase 4 wire 50Hz AC supply system, conforming to IS - 5039, IP-54 class protection and made of 3.15 mmCRCA mild steel sheet with 50x 50x6mm angleiron frame, hinged doors, front & rear opeing and lockingarrangement ( including provision of 65mm Godrej ( freedom) lock with 2 Keys) with necessary bus bar arrangment with insulated Aluminium bus bar having current carrying capacity 1.5 times the rated current ratingrating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for ACB/MCCB with suitable capacity of Aluminium bus bar strips including heat shrinkable sleeves,and providing extended bus bars with chamber arrangement for outgoing cables, copper control wiringofrequired size forinstruments and and comprising of the following including necessary PCC in 1:2:4 type B1 using 20mm graded stone aggregate for platform of suitable size:- Make- Power system & Control , Prestige , Sparsh Engineering , REWINCOMING MCCB 200 Amp 25 KA 4 Pole, 50 HZ Thermal - Magnetic Release - 01 No OUT GOING(i) MCCB 200 Amp 25 KA 4 PoleThermal - Magnetic Release-02 No. (ii) MCCB 63 Amp 25 KA 4 Pole Thermal - Magnetic Release-01 No.(iii) Digital Ammeter 0-100 Amp with built in selector switch - 01 No.(iv) Digital Voltmeter 0-500 Volt with built in selector switch - 01 No.(v) CT - 200/5 - 1 Set of three.(vi) Indicating lamp (RYB)-03 nos 15 Supply installing testing and commissioning factory made and tested, CPRIapprovedLT main feeder pillar Outdoor type, weather, vermin proof, free standing floor mounting type mounted of floor/over the duct, with required mounting channel, cable alley for all the feeders, suitable for 440 Volts, 3 phase 4 wire 50Hz AC supply system, conforming to IS - 5039, IP-54 class protection and made of 3.15 mmCRCA mild steel sheet with 50x 50x6mm angleiron frame, hinged doors, front & rear opeing and lockingarrangement ( including provision of 65mm Godrej ( freedom) lock with 2 Keys) with necessary bus bar arrangment with insulated Aluminium bus bar having current carrying capacity 1.5 times the rated current ratingrating for phase & neutral, 4 strips, installed on epoxy insulators housed in separated bus chambers covered with heat shrinkable sleeves with necessary bus bar tapings for ACB/MCCB with suitable capacity of Aluminium bus bar strips including heat shrinkable sleeves,and providing extended bus bars with chamber arrangement for outgoing cables, copper control wiringofrequired size forinstruments and and comprising of the following including necessary PCC in 1:2:4 type B1 using 20mm graded stone aggregate for platform of suitable size Comple all as specified and directed. Make- Power system & Control , Prestige , Sparsh Engineering , REWINCOMING MCCB 200 Amp 25 KA 4 Pole, 50 HZ Thermal - Magnetic Release - 01 No OUT GOING(i) MCCB 125 Amp 25 KA 4 PoleThermal - Magnetic Release-01 No. (ii) MCCB 63 Amp 25 KA 4 Pole Thermal - Magnetic Release-01 No.(iii) Digital Ammeter 0-100 Amp with built in selector switch - 01 No.(iv) Digital Voltmeter 0-500 Volt with built in selector switch - 01 No.(v) CT - 200/5 - 1 Set of three.(vi) Indicating lamp (RYB)-03 nos(vii) Tempra plug 125 A 3P+E - 01 No.(viii) Tempra plug 63 A 3P+E - 01 No. 16 Supply and fix or laying in trenches GItubing light grade of road crossing for cable protection etc,of the 80mm dia sizes including necessaryrequired complete all as specified and directed by Engr-in-charge.Make - Jindal / Prince Pipe/ Prakash Surya. 17 M& L for Earthing complete with copper plate earth plate electrode 60mm x 60mm x 3.15 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to copper strip of size 20mm x 3 mm as earth leadby means of bolts, nuts, check nuts and washers of brass or steel all as shown in electrical plate No 3 of MES Schedule Part-Iincluding and connecting to earthing testpoint block made of gun metal or phosphorus bronze size 75mmx75mmx25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw and testing on completion with and including 25 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) PCC base 1:4:8 type using 40 mm agregrate of size 750x750x100 mm thick with precast RCCcover 40 mm thick in PCC (1:2:4) type B1 using 20 mm graded stone aggregrate with 8 mm dia TMT bars 3 nos both ways with 12 mm dia round handle , PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate no 3 of SSR Part no 1 of 2009 including Earthing pit marker/ identifier of Iron plate of size 300mm X 200mm X 3mm and alongwith 1 meter long medium grade GI pipe of size 15 mm dia welded with steel plate including painting with applying one coat of red oxide and two coat ofpainting with synthetic enameled paint of approved qualityincluding writting letters as specified including testing on completion complete all as specified and directed. 18 M& L for Earthing complete with galvanised steel earth plate electrode of size 600mm x 600mm x 6mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) withtop edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth strip 25mm x 4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel complete all as shown in electrical plate No 3 of MES Schedule Part-Iincluding and connecting to earthing testpoint block made of gun metal or phosphorus bronze size 75mm x 75mm x 25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw and testing on completion with and including 40 mm bore light grade G.I. protection pipe (upto 7.5 M beyond outer edge of earth pit) and (1:4:8) type D2 using 40 mm agregrate of size 750mm x 750mm x 100 mm thick with precast RCCcover 40 mm thick in PCC (1:2:4) type B1 using 20 mm graded stone aggregrate with 8 mm dia TMT bars 3 nos both ways with 12 mm dia round handle , PGI funnel with wire mesh, 20 mm dia GI pipe light grade for watering all as shown in electrical plate no 3 of SSR Part no 1 of 2009 including Earthing pit marker/ identifier of Iron plate of size 300mm X 200mm X 3mm and alongwith 1 meter long medium grade GI pipe of size 15 mm dia weilded with steel plate including painting with applying one coat of red oxide and two coat ofpainting with synthetic enameled paint of approved qualityincluding writing letters as specified including testing on completion complete all as specified and directed. 19 S&F Submain wiring with two single core PVCinsulated FRLS multistrand copper conductor cable of size 10Sq mmdrawn into and including non metallic heavy duty rigid concealedPVCconduit not less than 25mm size ISI marked ivory colour (Pressfit or similar brand ) with allfittings / accessories and 10Sq mm FRLS multistrand copper conductorcable as continuous earth wire complete all as specified and directed.Make- Polycab/Havells/RR kables/plaza (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesare deemed to be included in the unit rate quoted for this items.) 20 S&F Submain wiring with two single core PVCinsulated FRLS multistrand copper conductor cable of size 16Sq mmdrawn into and including non metallic heavy duty rigid concealedPVCconduit not less than 25mm size ISI marked ivory colour (Pressfit or similar brand ) with allfittings / accessories and 16Sqmm FRLS multistrand copper conductorcable as continuous earth wire complete all as specified and directed.Make- Polycab/Havells/RR kables/plaza (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesare deemed to be included in the unit rate quoted for this items). 21 S&F Sheet metal enclosure 4 way double door distribution board when MCB to be used TPN 4 way ,415 volt complete all as specified and directed.Make - Seimens/Havells/Legrand/ L&T/ C&S. 22 S&FMCB TPN 63-100Amps 415 volt rupturing cap 10 ka C series complete all as specified and directed.Make - Seimens/Havells/Legrand/ L&T/ C&S. 23 S&F MCBsingle pole, 6 to 32Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and directed. Make - Seimens/Havells/Legrand /L&T/C&S. 24 Supply , installation, testing and commissioning of wall mounted hi wall split inverter type air conditionerunits of capacity 2 TRindoor unit ,outdoor unit complete with cordless remote control unit and with filter for better indoor air quality with minimum 5 star rating for operation on 230V , 50 Hz , single phase AC supply , complete interconnecting copper refrigerant piping , electrical cabling , drain piping , wall sleeve, supporting brackets for outdoor unit , and all necessary fittings , supports , fasteners etc as required complete all as specified and directed. Make - Daikin / Hitachi / O General / LLoyd. 25 S&F electronic wall mounted digital display(Input & output) voltage stabilizerfor automatic voltage correctionsingle phase, naturally air cooled, indoor type, designed for input voltage between 140 Volt to 280 Volts and out put voltage 230Volt and High / low voltage cut off with facility of including instant start & time delay relay of 10 second of capacity4KVA complete all as specified and directed. Make-V guard/Volina/ Blue bird. 26 S&F Submain wiring with two single core PVCinsulated FRLS-H multistrand copper conductor cable of size 04 Sq mmdrawn into and including non metallic medium duty rigid concealedPVCconduit not less than 25mm size ISI markedwith allfittings / accessories and 04 Sq mm FRLS-H multistrand copper conductorcable as continuous earth wire complete all as specified and directed. Make- Polycab/Havells/RR kables/plaza (Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesare deemed to be included in the unit rate quoted for this items.) 27 S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single poleone module MCB of 20 amp including electrical connection all as specified and directed by Engineer-in-Charge. Make - Havells / ABB/ Goldmedal / Legrand/ L&T. 28 M&L forflame proof pointwiringwith two single core FRLS-H PVC insulated& PVC unsheathed multi stranded copper conductor cable of size 1.5Sqmm1100 voltsgradein and includingstove enamelled steel conduit of size20 to 25 mmwith all accessories and one single core PVC insulated & PVC sheathed multistranded FRLS-H copper cable of size 1.5 Sqmm 1100 Voltsgradeas earthcontinuityconductorconnectedto commonearth dolly, switch board complete incuding cutting chesses on wall/ floour/ ceiling etc. & making good the disturbed surface with (1:4) cement morter all as specified for one light / fan point controlled by one 5 Amps flameproofswitch one way complete all as specified and directed. 29 S&F switch flame proof rotory type with termination box in LM 6, 16 A,single phase 250 volts,complete all as specified and directed. 30 S&FLED Light Fitting 2x20 Watt flame proof ,CMRI certified recommended for gas/vapour group of IIA &III B ,zone 1 and 2 and IP 65 Protection with die cast alluminium housing with heat resistant toughned glass with LED tube light, fixtures, driver holders ,connectors etc complete with all accesories prewired and including connecting with three core flexible copper conductor cable with suitable sizecomplete all as specified and directed. 31 S&F flame proof metallic body exhaust fan single phase 230 Volt 50 Hz 300 mm 1440 RPM with louvers and shutter including civil work i.e making of holes and complete with all fixing accessories all as specified and directed. 32 M & L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt gradedwawn into and including non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front coverplate & back plate for mounting modular type switches /socket/fan/ regulator etcincluding provision of one single corePVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dollyswitch board complete all as specified and directed for following-Make of Cable -Polycab/Plaza/Finolex/Havells.One light/fan point controlled by one switch SP 5 Amps ,240 V 33 Ditto all as per item No 32 here-in-before One bell/buzzer point controlled by bell push complete all as specified and directed. 34 Ditto all as per item No 32 here-in-before One 3 pin 5 amps switch socket outlet point on independent board complete all as specified and directed. 35 Ditto all as per item No 32 here-in-before One 3 pin 5 amps socket point on same board complete all as specified and directed. 36 Ditto all as per the item no 32 herein before but with 2.5 sqmm conductor for5 pin 15 Amps switch socket outlet complete all as specified and directed. 37 S&F switch modular type 1 module single pole, one way 5 Amps complete all as specified and directed.Make:- Havells ( Crabtree )/Goldmedal/ABB/ L&T. 38 S&F switch modular type 1 module single pole, one way 15 Amps complete all as specified and directed.Make:- Havells ( Crabtree )/Goldmedal/ABB / L&T. 39 S&Fsocket outlet 2 in 1, 5 pin, 15Amps modular type 2 module complete all as specified and directed.Make:- Havells ( Crabtree )/Goldmedal/ABB /L&T. 40 S&F socket outlet 5Amps modular type 2 module complete all as specified and directed.Make:- Havells ( Crabtree )/Goldmedal/ABB / L&T. 41 S&F modular Bell push 5 Amps complete all as specified and directed.Make:- Havells ( Crabtree )/Goldmedal/ABB /L&T. 42 M&L for ceiling rose,PVC/polycarbonate, isolated body complete all as specified and directed. 43 S&F stepped type electronic fan regulator modular type 1 module complete all as specified and directed.Make:- Havells ( Crabtree )/Goldmedal/ABB or equivalent 44 S&F bell, ding dong type AC, 230 Volt, single pole. complete all as specified and directed. 45 S&F LED batten light fittings 18/20 watt ,220 volt AC, connecting up with 3 core flexible cable copper conductor of suitable size from ceiling rose complete all as specified and directed. .Make:- Havells/Phillips/Bajaj L&T 46 Horizontal boring in soft/loose soil/under roads of any width by manual arrangements for inserting GI pipe up to 100mm bore for passing cables complete all as specified and directed. Note : GI pipe shall be measured and paid separately under relevant items given here-in-after. 47 M&L for copper strip of size 20 mm x 3 mm complete with saddles , insulators and fixing screws for fitting the strip for earth continuty conductor up to test points and up to Electrical equipments complete all as specified and directed . 48 M&L for GI strip of size 25 mm x 4 mm complete with saddles , insulators and fixing screws for fitting the strip for earth continuty conductor up to test points and up to Electrical equipments complete all as specified and directed . 49 Supply and layinggalvanised iron tubing, 40 mm bore,light grade protection of earth strip pipe with all fittings forfixed to pole/wall/ in ground including all fixing accessories completeall as specified and as directed.Make- Jindal/TATA / Prakash Surya.
Contract Date: Jan 01, 2026 Contract Value : ₹ 23.91 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 4
Uttar Pradesh View Result →
20.
Defence #11082255 AOC
Bids Are Invited For 24 Core Ofc Unarmoured Cable Single Mode , Hdpe Pre Lubricated Pipe 40 Mm Dia With Rope , Manual Digging ,Splicing And Laying Of Ofc At The Depth 1.65 Mtr Inside Hdpe Pre Lubricated Pipe , Olt Optical Line Terminal 24 Port Gpon With Pon , Onu Optical Network Unit Without Wifi , 24 Port Fdf Lc-Lc Type With Lc Snap In Detachable Type , 08 Port Fdf Lc-Sc Type With Sc Snap , Ofc Route Marker 1X5 Concrete Of 3.5 Ft Height With Engrave Air Force Ofc , Sc Sc Ofc Patch Cords 5 Mtr , Casing And Capping 2 Inch , Joint Chamber Manhole 1 Mx 1M Rcc Ring Type , Road Cutting And Repair Work , Gi Pipe For Road Drainage Crossing , Ofc Enclosure 24 Port , Ofc Splitter 08 Port , Route Diagram In 5 Ft X 5Ft , Termination Of Ofc Fdf Per Core , Warranty Total Quantity : 12655
Contract Date: Ref. Documents Contract Value : ₹ 17.48 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 14
Meghalaya View Result →
Telangana View Result →
Telangana View Result →
23.
Health and Family Welfare #10973438 Technical Bid
Supply Of Cadiology Stent And Its Accessories Please Refer To Tender Documents , Stent 1. Usfda/Ce/Cdso/Icmed Approved Everolimus Eluting Cobalt Chromium Stent With Multi – Link 8 Peak To Valley 3-3-3 Non Liner Link With Skive Technology For Kink Resitance And Improved Maneuverability To Tortuous Anatomy + Coxial Positioning System (Cps) For Improved Pushability 2. Sirolimus Coated Cobalt Chromium Stent With 10 Crown And 2 Link Design Having Bioresorbable Abluminal Gradient With Size Matrix Of 9 To 50 Mm 3. Rapamycin Traget Eluting Stent With Biodegradable Polymer With Abluminal Groove Design Having Drug Dose Of 03Ug/Mm2 Having Size Matrix Of 13 To 38Mm. 4. Hybrid Cobalt Chromium Abluminal Biodegradable Polymer With Ba9 Alpha Deign Having Unique Pro Healing Coating With Size Matrix Of 9 To 36Mm 5. Everoluimus Eluting Cobalt Chromium Stent With Open Cell Deign Of 6Um And Wavflo Struct, It Is Valley To Velley Long S Connected Design With Size Matrix From 8 To 52Mm. 6. Sirolimus Eluting Stent With Abluminal Coating And Biodegradable Polymer With Edge Coating Hybrid Cell Design Stent Diameter From 2.25 To 4 Mm Stent Length 12Mm To 48Mm. 7. Coronary Covered Stent Covered Stent For Coronary Use All Sizes , Balloon Tipped Thermodilution Triple Lumen Catheter ( Swanganz Tye ) Balloon Tipped Thermodilution Triple Limen Catheter ( Swan Ganz Type ) , 6F,7F, Usfda/Ce/Cdso/Icmed Approved Certificate , Usfda/Ce/Cdso/Icmed Approved Certificate Ptca Pre-Dilatation Semi- Compliant Rapid Exchange Balloon With Short Balloon Taper , Low Entry Profile (<= 0.016” ) Diameter – 1.2/1.25, 1.5, 2.0, 2.5, 3.0 Mm Or More Length –Minimum 6-8Mm To 20Mm , Coronary Micro Catheter Usfda/Ce/Cdso/Icmed & Dg Approved Coronary Micro Catheter With Distal Diameter Of 1.8 Fr Or Less, Proximal Diameter 2.6F Coated Inner Layer , And Distal Hydrophilic Coating At The Outer Layer, Flexible Tip With Outer And Inner Taper With Marker At Distal Tip For Enhanced Distal Visibility To Cross Difficult Lesions. A) 130-135 Cm Long, B) 150-160Cm Long. , Guide Catheter Extension System 6F,7F Compatible , Rapid Exchange With 145-150 Cm Working Length, Tip Radiopaque Marker. , Paclitaxel Coated Coronary Drugs Eluting Balloon Usfda/Ce/Cdso/Icmed Approved /Certified Paclitaxel Coated Coronary Drug Eluting Balloon (All Sizes) , Sirolimus Coated Coronary Drug Eluting Balloon Usfda/Ce/Cdso/Icmed/ Dcgi Approved Sirolimus Coated Coronarydrug Eluting Balloon ( All Sizes ) , Temporary Pacing Electrode: Must Be Nbih™ Standard , Must Have Soft- Tip Bipolar Electrode , Sizes -6 French125cm , Usfda/Ce/Cdso/Icmed Approved / Certified Ptca Pre-Dilatation Semi- Complaint Balloon For Cto Usfda/Ce/Cdso/Icmed Certified Ptca Pre- Dilatation Semi-Complaint Balloon Or Difficult To Cross Lesions And Smallest <= 0.017”, Lowest Crossing Profilkes For Crossing Cto Difficult To Cross Lesions And Smallest Balloon Size Of 1.0/1.1M Diameter And Length Of 6- 8Mm With Single Marker At The Center Of The Balloon. Other Diameter And Length Of 6-8Mm With Single Marker At The Center Of The Balloon. Other Diameter Of 1.2/1.25Mm, 1.5Mm, 2Mm,2.5Mm, 3Mm. Other Lengths Of 10- 12Mm, 15-18Mm, 20-22Mm, 25Mm Or More. , Usfda/Ce/Cdso/Icmed Approved / Certified Cto Balloon Tapered Tip With Lower Entry Profile Of 0.016” And Specialized Of 1.00Mm, Kissing Balloon Technique With In 5F Guiding Catheter Having Pebaxraw Material . , Usfda/Ce/Cdso/Icmed Approved / Certified Ptcanon-Compliant Balloon With Tip Lower Entry Profile Of 0.017”, High Rbp Of 20Atm , Low Balloon Growth Rate <5% , Super Hydrophilic Coating , Usfda/Ce/Cdso/Icmed Approved / Certified Ptcasemi-Compliant Balloon With Tip Lower Entry Profile Of 0.017”, High Rbp Of 20Atm , Low Balloon Growth Rate <5% , Super Hydrophilic Coating , Usfda/Ce/Cdso/Icmed Approved / Certified Ptca Pre- Dilatation , Monorail Balloon (Semi Complaint ) Usfda/Ce/Cdso/Icmed Approved / Certified Ptca Pre-Dilation , Manorail Ballon (Semi Complaint) . Low Entry Profile (<=0.017”) And 5F Guide Catheter Compatibility. Diameters (Mm) : 0.5,1.0,1.2/1.25,1.5,2.0,3,3.5,4.0 Length : 6-8Mm To 20Mm Or More , Usfda/Ce/Cdso/Icmed Approved / Certified Ultra-Low Entry Profile Semi Compliant Balloon, Usfda/Ce/Cdso/Icmed Approved / Certified Ultra Low Entry Profile From 1.25* 10 To 2.25*10 Remains Same For Exceptional Cross Ability Even With Higher Diameter Balloon. , Radiation Protection Drape- Radpad For Complex Cases , Gp 11B/111 Aggramed , Manifold- 3Port R/On Smooth Operation , No Leakage, Half Body Available, Visible Handle Makes The Flow Control Easy And Accurate. Right On/Off Types Are Available, Port: 2 Port/3 Port, Pressure : 500 Psi, Valve Type: Right On/Off. , Inflation- Gun Type Pressure Gauge • 30 Atm Reliable In Any Procedures • Fluorescent Indicator Good Pressure Reading, Body And Button • 30 Cc Syringe Small To Big Balloons (Pta & Ptca) • Automatic Cam Locking System Easy Handling • Clear Material Easy Air Bubble Detection And Removal, Handle • 30Atm, 30Ml Hybrid/Gun Type/30Atm, 20Ml Screw. , Inflation Comfort Device • 30 Atm For Any Procedures • 3Way Stopcock • Ce Approved • Semi Gun Type • Clear Material Easy Air Bubble Detection And Removal, Handle , Angiography Wire Brilliant Lubricity, Kink Resistance, Better Radiopaque Performance, Excellent Flexibility Ptfe Coated Available Sizes-0.032 In 150 Cm & 260 Cm In J. Tip And Straight Tip , Angiography Wire Brilliant Lubricity, Kink Resistance, Better Radiopaque Performance, Excellent Flexibility Ptfe Coated Available Sizes- 0.035 In 150 Cm & 260 Cm In J. Tip And Straight Tip , Angiography Wire Brilliant Lubricity, Kink Resistance, Better Radiopaque Performance, Excellent Flexibility Ptfe Coated Available Sizes-0.38 In 150 Cm & 260 Cm In J. Tip And Straight Tip , Needle-18G- Pink Hub Sharp Back Cut/Bevel Cut Tip For Lower Penetration Force, Available In Pink And Clear Hubs, Clear Hubs For Visualizing Guide Wires. Sizes-18G, Back Cut (07Cm) Pink/18G, Back Cut (07Cm) White/Clear/20G, Black Cut (3.8Cm) Pink/20G, Back Cut (3.8Cm) White/Clear. , Plastic Luer Lock Syringe, 2Cc, Without Finger Grip. Sterile Plastic Contrast Injecting Luer Lock Controlled Syringe 2Cc, Without Finger Grip. , Plastic Luer Lock Syringe, 10Cc,, Without Finger Grip. Sterile Plastic Contrast Injecting Luer Lock Controlled Syringe 10Cc, Without Finger Grip. , Plastic Luer Lock Syringe, 12Cc, Without Finger Grip. Sterile Plastic Contrast Injecting Luer Lock Controlled Syringe 12Cc, Without Finger Grip. , Plastic Luer Lock Syringe, 20Cc, Without Finger Grip. Sterile Plastic Contrast Injecting Luer Lock Controlled Syringe , Y Connector-Push Pull Clear Body For Inspection, Minimize Blood Loss And Provide A Smooth Passage For Interventional Device Delivery, Push-Pull/Push Click/Screw Type Mechanism Allows To Operate With Single Hand, No Leakage Under 80Kpa Type-Push Pull/Push Click/Screw , Performer Hemostasis Y-Connector Kit • Push Pull Type With Fixed Side Arm & 3-Way Stopcock • Blunt Introducer 20G • Torquer , Tr Band Crank Specifically Designed To Assit Haemostasis Of The Trans Radical Invasive Coronary Procedures. This Product Is Equipped With Dual Compression Balloons Which Enables Precise Compression Of The Radical Artery. A Transparent View Guarantees Continuous And Clear Observation And Absolute Visual Control Of The Access Site. Available In 2 Band Sizes For Precise Fit, The Device Is Confortable, Safe And Effective In Obtaining Reduced Rates Radical Artery Occlusion After Invasive Coronary Procedures. 24Mm,20Ml , Tr Band Crank Specifically Designed To Assit Haemostasis Of The Trans Radical Invasive Coronary Procedures. This Product Is Equipped With Dual Compression Balloons Which Enables Precise Compression Of The Radical Artery. A Transparent View Guarantees Continuous And Clear Observation And Absolute Visual Control Of The Access Site. Available In 2 Band Sizes For Precise Fit, The Device Is Confortable, Safe And Effective In Obtaining Reduced Rates Radical Artery Occlusion After Invasive Coronary Procedures. 28Mm,20Ml , Diagnostic Jl Large Luman Diameter For Better Flow Rate Of Contrast Agent, Very Soft Tip Prevents From Initial Injury. Available In 5Fr And 6Fr In 100Cm (Jl,Jr,Pig And Tig Model) , Diagnostic Jr Large Luman Diameter For Better Flow Rate Of Contrast Agent, Very Soft Tip Prevents From Initial Injury. Available In 5Frin 100Cm (Jl,Jr,Pig And Tig Model) , Diagnostic Jr Large Luman Diameter For Better Flow Rate Of Contrast Agent, Very Soft Tip Prevents From Initial Injury. Available In6fr In 100Cm (Jl,Jr,Pig And Tig Model) , Tiger Large Luman Diameter For Better Flow Rate Of Contrast Agent, Very Soft Tip Prevents From Initial Injury. Available In 5Fr In 100Cm (Jl,Jr,Pig And Tig Model) , Tiger Large Luman Diameter For Better Flow Rate Of Contrast Agent, Very Soft Tip Prevents From Initial Injury. Available In6fr In 100Cm (Jl,Jr,Pig And Tig Model) , Femoral Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-4F In 11Cm. , Femoral Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-5F In 11Cm. , Femoral Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-6F In 11Cm. , Femoral Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-7F In 11Cm. , Radical Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-4F, In 11Cm/7Cm , Radical Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-5F In 11Cm/7Cm , Radical Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-6F In 11Cm/7Cm , Radical Sheath Better Flexibility, Kink-Resistant System, Smooth Tapered Tip Helps Easy Access To The Artery, Lessen Possibility Of Damaging Tissue During Advancement And Withdrawal. Dilator-To-Hub Interlock Avert Dilator Back Out During Insertion. Sizes-7F In 11Cm/7Cm , Pressure Monitoring Line Smart Line Is Made Up Of High Quality Medical Grade Clear And Nontoxic Pvc That Offers Kink Resistant Tubing Available As Latex Free And Sterile In Phylogenic Form, This Luer Taper Port Type Line Is Strategically Designed To Be Used In Fluid Management Of Invasive Pressure Monitoring Systems. Sizes-100Cm With 500Psi &1200Psi (Braided & Non Braided) , Pressure Monitoring Line Smart Line Is Made Up Of High Quality Medical Grade Clear And Nontoxic Pvc That Offers Kink Resistant Tubing Available As Latex Free And Sterile In Phylogenic Form, This Luer Taper Port Type Line Is Strategically Designed To Be Used In Fluid Management Of Invasive Pressure Monitoring Systems. Sizes-150Cm With 500Psi &1200Psi (Braided & Non Braided) , Pressure Monitoring Line Smart Line Is Made Up Of High Quality Medical Grade Clear And Nontoxic Pvc That Offers Kink Resistant Tubing Available As Latex Free And Sterile In Phylogenic Form, This Luer Taper Port Type Line Is Strategically Designed To Be Used In Fluid Management Of Invasive Pressure Monitoring Systems. Sizes-200Cm With 500Psi &1200Psi (Braided & Non Braided) , Guide Catheter A Guiding Catheter Is Intended For Use In Angioplasty And Angiography Procedures. Elizer Has A Large Lumen To Allow Contract Media To Be Injected At High Flow Rates And Is Designed To Exhibit Good Torque Control The Catheter Inserter On The Pigtail Catheter Can Be Used To Straighten The Catheter Tip For Easier Fixed Strain Relief Prevents The Catheter From Kinking At Its Proximal End. Available In Sfr And 6Fr In 100Cm (Jl, Jr, Pig And Tig Model) , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A)Judkins Left Without Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. B)Judkins Left With Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. C)Judkins Right With Short Tipholes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. D)Judkins Rightwithout Side Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. E)Judkins Rightwithside Holes (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. F)Judkins Right With Short Tip (Curves 3,3.5,4,5 Cm),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. G) Ima Guiding Catheter , 5F/ 6F/7F , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. H) Multipupose ( Ai , Aii),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. H) Multipupose ( B I , B Ii),Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. J) Aamplatz Left Without Side Hole ( Curvesal 0.75, Al 1, Al1.5 ,Al2 , Al3) ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. K) Aamplatz Left With Side Hole ( Curvesal 0.75, Al 1, Al1.5 ,Al2 , Al3) ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. K) Aamplatz Left With Side Hole ( Curvesal 0.75, Al 1, Al1.5 ,Al2 , Al3) ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. L)Amplatz Right Without Side Hole ( Curvesar 1, Ar 2) ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. M)Amplatz Right With Side Hole ( Curvesar 1, Ar 2) ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. N)Voda Left ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. O)Voda Right ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. P)Left Coronary Bypass Guide Catheter , 6F/7F , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. Q) Right Coronary Bypass Guide Catheter , 6F/7F , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. R) Contra Lateral Support (Cls) Left Without Side Holes ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. S) Contra Lateral Support (Cls) Left With Side Holes ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. T) Contra Lateral Support (Cls) Right Without Side Holes ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. U) Contra Lateral Support (Cls) Right With Side Holes ,Size 5F/6F/7F/8F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. V) 3D Right Guiding Catheter Without Side Hole ,/6F/7F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. W) 3D Right Guiding Catheter With Side Hole ,/6F/7F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. X) Hockey Sick Guiding Catheter ,/6F/7F. , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. Y) Shepherd Crook Right Type Guiding (Curves 3.5,4,5) , 6F/7F , Ptca Guiding Catheters Us Fda Approved/Certified Or Ce Approved/Certified, Ptca Guiding Catheter, => 100Cm Long. It Should Be Large Lumen Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. Y) Head Hunter Guiding Catheter , 6F/7F , ? Coronary Micro Catheter ?Distal Outer Diameter 1.8 Fr And Proximal Outer Diameter 2.6 Fr With Distal Hydrophilic Coating And Tapered Shaft Design. ?Catheter Length 130Cm For Antegrade Approach And 150 Cm For Retrograde Approach. , Radical Introducer Ii Sheath: ?Radical Introducer Sheath With Patent Unique Cross Cut Design Haemostatic Valve, 20Gx2” Entry Needle (Plastic Iv Catheter) And 0.025” Mini Plastic Guidewire. , Femoral Introducer Ii Sheath(Gf & 7F Only ) . Femoral Introducer Sheath With Patent Unique Cross Cut Design Haemostactic Valve , 10 Cm Cannula Length And 0.035’’ Mini Guidewire . Pmda Approved , 3 Flow ( Thrombus Aspiration Catheter) . 6F Compatible With Total Length Of 145Cm Having Balloon Diameter Of 1.8Mm With Peak Proximal Shaft Having Digital Marker Band Of Platinum Iridium 3Mm From Tip And Locking Syringe Of 60Ml , Heartrial: (Ptca Guide Catheter Ikari Shape ) . Ikari Shape Ptca Guide Catheter With Enchanced Kink- Resistance , Gentle Tip & Powerful Shaft Performance , Gss: (Glide Sheath Clyinder ) . Transadial Sheath With Unique Thin Wall Technology. 7 Fr Sheath Has An Outer Diameter Of 2.8Mm 6Fr Has Od Of 2.46Mm & Sfr Has An Od 2:13Mm, Hydrophillic M Coating With 20/21G Surflash Needle And Tif Tip Technology Which Provide Optimal Tapering Design For Smooth Penetration , Angioseal : (Vasular Closuredevice ) . Vascular Closuredevice With Bio Absorbable Pga Suture That Provid E A Secure Seal, , Bio Absorbable Collagen Designed To Conform To The Arteriotomyfor Confident Closure , And Low Profile Bio Absorbable Anchor ( 50:50 Blend Glycolideandlactidepolyer ) To Fit Closely Against Arterial Wall Leaving Blood Flow Undistributed While Maintaining Vessel Diameter , Iv Infusion Set Withflow Regulator With Standard Drip Chamber , .014” One Piece Core Workhorse Wire With Joint Less Spring Coil With Slip Coat Coating Over The Sprig Coil, Tip Load 8G, 180Cm Length Tip Radiopacity 3Cm , 014” One Piece Core Workhorse Wire With Jointless Spring Coil , With Sion Tech, Having Composite Core With Actone Inside , Length 28 Cm With , Tip Load 7G 180Cm Length Tip Radiopacity 3Cm , 014” One Piece Core Workhorse Wire With Jointless Spring Coil , With Sion Tech, Having Composite Core With Actone Inside , Length 20 Cm With , Tip Load 5G 180Cm Length Tip Radiopacity 3Cm , 0.014 “ One Piece Core Workhorse Wire With Jointless Spring Coll 22Cm Polymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve, Tip Load 0.8G, 180Cm Length Tip Radiopacity 3Cm , 0.014 “ One Piece Core Workhorse Wire With Jointless Spring Coll 22Cm Polymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve, Tip Load 18G, 180Cm Length Tip Radiopacity 3Cm , 0.014’’ One Piece Core Extra –Support Wire With Jointless Spring Coil, Ptfe Coating Over The Shaft , Tip Load 78.180Cm Length With Tip Radiopacity 4Cm , 0.014’’ One Piece Core Workhorse Wire With Jointless Spring Coll , With Polymer Jacket With Sion Tech, Having Composite Core With Actone Inside, Length 28Cm, With Tip Load 8G, 180Cm Length Tip , 0.014’’ Extra Support One Piece Core Extra –Support Wire With Jointless Spring Coil With Sion Tech, Having Composite Core With Actone Inside , Tip Load 5G, Length Tip Radiopacity 3Cm , 0.14’’ One Piece Core Specially Wire With Jointless Spring Coil Tapering To 009, 0.8G Of Tip Load :16 Cm Polymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve ,190Cm Length; Tip Radiopacity 16Cm , 0.014’’ One Piece Core Specially Wire With Jointless Spring Coil Tapering To 010, Igf Of Tip Load :16 Cm Polymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve ,190Cm Length; Tip Radiopacity 16Cm , 0.014’’ One Piece Core Specially Wire With Jointless Spring Coil Tapering To 010, 16 Cm Polymer Sleeve Length With Slip Coat Coating Over The Polymer Sleeve ,190Cm Length; Tip Radiopacity 16Cm , 0.014’’ One Piece Core Cto Wire With Jointless Spring Coil Ptfe Coating Over The Shaft , Tip Load 3G, 6G And 12G 180Cm Length With Tip Radiopacity 11Cm , 0.014’’ One Piece Core Wire With Jointless Spring Coil, Ptfe Coating Over The Shaft , Tip Load 3G, 180Cm Length With Tip Radiopacity 11Cm , Ht-Bmw Universal Ii Regular Work Horse Guidewire With Elastine Nitinol Core , Hyten Stainless Steel Tip Intermediate Polymer Sleeve With Smooth Glide Coating On Proximal And Turbocoat On Distal Tip Between Tip Load 0.5- 0.7Gm , Dedicated Guidewire For Externalization With Tip Load O3g Length 330Cm , One Piece Core Wire With Jointless Spring Coll With Slip Coat Over The Spring Coil Tapering To 009’’, Tip Load 9G, 180Cm Length Tip Radipacity 20Cm , One Piece Core Wire With Jointless Spring Coil With Slip Coat Over The Spring Coil Tapering To .009’’, Tip Load 12G, 180Cm Length Tip Radipacity 20Cm , 0.010’’ One Piece Core Wire With Joint Less Spring Coil Length 15Cm, Cone Tip With A Tip Load Of 1.7Gm.190Cm Length Tip Radiopacity 15Cm , 011’’ One Piece Core Wire With Jointless Spring Coll Length 15Cm,Con Tip With A Tip Load Of 3.5Gm 190Cm Length Tip Radiopacity 15Cm , 012’’ One Piece Core Wire With Joint Less Spring Coil Length 15Cm, Cone Tip With A Tip Load Of 4.5 Gm 190Cm Length Tip Radiopacity 15 Cm 0.014’’ , 0.014’’ Guidewire For Exchange Of Microcatheters And Other Over- The-Wire Devices ; Length 165Cm , 0.014’’ Extra Support One-Piece Core Wire With Jointless Spring Coil With Sion Tech , Having Composite Core With Actone Inside , Lowest Tip Load .3G Length Tip Radiopacity 3Cm , Pre-Shaped Tip, 52 Cm Hydrophilic Coating , Available In 190 And 300 Cm Lengths , Micro Channel Dilator Tapered Soft Tip Of 1.3 Fr With Tungsten Braiding And Hydrophilicplomer Shaft With Od Of 2.6 Fr Length 135Cm , Micro Channel Dilator Tapered Soft Tip Of 1.3 Fr With Tungsten Braiding And Hydrophilicplomer Shaft With Od Of 2.6 Fr Length 150Cm , Wire Braded Catheter Works With Rotation Movements For Cto Penetration Catheter Length 135Cm , Micro Catheter With Lowest Entry Profile 1.4F And Crossing Profile 1.8F With Actone Technology, Caravel 135, Ptca Asahi , Micro Catheter With Lowest Entry Profile 1.4F And Crossing Profile 1.8F With Actone Technology, Caravel 150, Ptca Asahi , Gladius Ex/Mg-Tip Load 3.0Gf, Ploymer Jacket Length 40Cm Slip Coat 50Cm Raiopaque Length 3 Cm , Gladius Mg 14- Gladius Ex/Mg-Tip Load 3.0Gf, Ploymer Jacket Length 40Cm Slip Coat 50Cm Raiopaque Length 3 Cm , Doc Extension Wire Compatible With 0.014 Inch Ptca Guidewire
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Statutory Bodies & Commissions/Committees No of Bidders 12
Himachal Pradesh View Result →
Uttar Pradesh View Result →
25.
Drinking Water Supply and Sanitation #10907833 AOC
Tender for (6.6) Earth Work In Excavation In Foundations Trenches Etc. In All Kinds Of Soil Where Pick-Jumper Work Is Not Involved And Not Exceeding 2.0 Metres Depth Including Dressing Of Bottom And Sides Of Trenches, Stacking The Excavated Soil Clear From The Edge Of Excavation And Subsequent Filling Around Masonry In 15 Cm, Layers With Compaction Including Disposal Of All Surplus Soil As Directed Within Lead Of 30 Metres. , First Class Burnt Brick Laid In Cement Sand Mortar 1:6 In Foundation And Plinth , 10Mm Thick Cement Plaster 1:4 , 10Mm Thick Cement Plaster 1 : 4 On Floors. , Reinforced Cement Concrete 1:2:4 Hand Mixed But Including Steel Reinforcement , Cement Concrete 1:4:8 (A) With Brick Balast 40Mm Gauge (I) Mixing By Manual Means , Cement Concrete 1:2:4 (A) With Stone Ballast Or Shingle (I) Mixing By Manual Means , Laying And Jointing Of Upvc Pipe315 Mm Dia Of 2.5 Kg/ Sq Cm Pressure Isi Marked Upvc Pipes As Per Isi- 4985 Along The Trenches And Laying The Same In Trenches To Correct Alignment And Gradients, Cutting, Jointingand Testing Complete As Per Specifications. , Wrought Iron & Mild Steel Ladders, Framed Grills,Gratings Etc. With Ends Of Bars Riveted Or Molded Forged Framed Window Guards, Barred Iron Doors Stair Case Iron Railing Etc. Including Cost Of Bolts And Nuts, Screws Welding Rod Complete Fixing In Position , Foot Rest For Manhole. (1) Providing Orange Colour Safety Footrest Of Minimum 6Mm Thick Plastic Encapsulated As Per Is:10910 On 12Mm Dia Steel Bar Confirming To Is:1786 Having Minimum Cross Section As 23Mm X 25Mm And Overall Minimum Length 263Mm And Width As 165Mm With Minimum 112Mm Space Between Protruted Legs Having 2Mm Tread On Top Surface By Ribbing Or Chequering Besides Necessary And Adequate Anchoring Projections On Tail Length On 138 Mm As Per Standard Drawing And Suitable To Withstand The Bend Test And Chemical Resistance Test As Per Specification And Having Manufacturers Permanent Identification Mark To Be Visible Even After Fixing, Including Fixing In Manholes With 230X150x75cm Cement Concrete Block 1:2:4 (1Cement: 2 Sand: 4 Stone Aggragate) Complete As Per Design. , Shuttering For Faces Of Concrete Foundations And Foundation Beam & Plinth Beam (Vertical Or Battering) , Providing And Fixing Of Alfa Alfa Valve 300 Mm Dia Fitted On Riser Pipe To Act As Nakka (D Regulators) , Providing & Fixing Of Steel Shutter Gate Assembly In Main Pipeline Complete In All Respect , Providing And Fixing Elbow/Bends Of 90 Degree 6Kg/Cm2 Pressure As Per Is 4985 I/C Testing Commisioning And Complete In All Respect To The Specification Of Engineer In Charge , Providing And Fixing Equal Tee Of 6Kg/Cm2 Pressure As Per Is 4985 I/C Testing Commisioning And Complete In All Respect To The Specification Of Engineer In Charge , Providing And Fixing Ms Service Saddle 315 X 50Mm As Per Is 4985 I/C Testing Commisioning And Complete In All Respect To The Specification Of Engineer In Charge , Providing And Fixing Tail End Piece 315 Mm Of 6 Kg/Cm2 Pressure As Per Is 4985 I/C Testing Commisioning Complete In All Respect To The Satisfaction Of Engineer In Charge , Providing & Fixing Single Air Valve Isi Marked As Per Is-14845 Including Jointing All Carriages Complete .C.I Single Air Valve (Size 50Mm) , Providing, Laying, Fixing, Testing And Commissioning Of C Class Heavy Duty Ms Pipe Conforming To Indian Standard Is : 1239/3589 Including Fittings Like Tees, Bends, Sockets, Elbows, Flanges, Tapers, Nuts Bolts, Gaskets Etc. Fixing The Pipe On The Wall / Ceiling With Suitable Clamps And Painting With Two Or More Coats Of Synthetic Enamel Paint Of Required Shade Complete In All Respects. (D) 50Mm Internal Diameter , Providing & Fixing C.I/D.I Flanged End, Stem Of Ss (Ais 1410) And Bronze(Gunmetal) Working Parts Sluice Valves Isi Marked 14846-2000, Including Jointing , Testing & Cost Of Nut ,Bolt & Insertion Sheet, All Carriage Complete (With The Approval Of Engineer In-Charge). (B) Class Pn-1.6 As Per Isi 300Mm I/D Sluice Valves Flanged , Excavation By Mechanical (Jcb Or Hydraulic Excavator) In Trenches For Pipelines With Straight Or Open Cutting In Streets Or Open Area Including And Dressing Sides Levelling Of Beds Of Trenches To Correct Grade, Cutting Joint Holes, Refilling Consolidation, Including The Cost Of Diversion For Traffic, Crossing Over Trenches For Access To The Houses, Watching Fencing Etc And Removal Of Surplus Soil Outside/Inside The Town Involving Lead Upto 15 Meter Complete In All Respect.
Contract Date: Apr 29, 2026 Contract Value : ₹ 19.73 Lakh
Government Departments No of Bidders 2
Punjab View Result →
26.
Defence #10898109 AOC
Tender For Repair Replacement And Servicing Ht Equipments Including Replacement Of Old Ht Cables And Its Connected Works At Aundh Military Station Under Ge Mh And Rh Khadki; 1 Disconnecting the HV(22KV) & LV(0.415kV) side electrical connections including neutral earth strip of existing step down transformer, drain out the complete oil of transformer and store carefully in clean container. Cleaning of all HV/LV windings terminals, cleaning of conservator tank, cooling fins/tubes, tank, etc. Thuroughly inspecting of core and winding complete, reinsert the core coil assembly into the transformer tank, replacing 5/3 mm thick rubberised corksheet gasket of top cover complete and refilled with filtered transformer oil upto the desired level marked in conservator tank and record the insulation resistance of the winding both HV/LV side between earth and HV/LV winding, reconnecting the HV/LV side electric cables complete of following capacity of stepdown transformer all as specified and directed.Note - Transformer oil filtration and top up shall be measured and paid seperately under the relevant item of schedule 2 Transformer capacity 100KVA to 250 KVA 3 Transformer capacity 300KVA to 500 KVA 4 M&L for dehydration of transformer oil with mobile stream line transformer oil filteration plant at site with all accessories connected to transformer and carrying out filterartion of oil to desired dielectric strenghtto achieve electric strength of 60 KV for 1 minute at 2.5 mm gap as per relevant IS fortransformer installed at various locations out door/in door type all as specified and directed by the Engineer in Charge Note : Test certificate shall be submitted for before and after filteration for dielectric strenght on the proper format. (ii) Transformer oil used for top up will be measured and paid seprately under relevant item. 5 Supply and topping up new transformer oil confirming to IS -335 of 1993 into the conservator tank/body tank of the transformer at various location all as specified and directed. Make : Power Oil or its equivalent. Note : The transformer oil for topping up shall be with di-electric strength of 40KV 6 Disconnecting all in coming and outdoor cables removing the transformer from the platform/two pole structure and floor and loading it in the vechicle carefully using the crane and transporting it to the workshop for repairs and transformer transport back to site, reinstall it, reconnecting all incoming and outgoing cable by properly crimping using lugs of suitable size taping the bushes/busbar, using insulation tape and testing of capacity 200 KVA to 500 KVA all as specified and directedNote :LT/HT side ceramic busing, brass spindle for HT/LT side, Rewinding, Dehydration of oil shall be measured and paid seprately in respective Items 7 M&L for rewinding of HT /LT windings oftransformer, winding the defective coils with approved quality copper wire as per IS of same gauge and existing size together with new insulation materials, bracings the terminals before placing into the tranformer and assembling the HT / LT coil with new insulation between core and LT coil all as required and fitting the coils in the chamber, testing and commisioning the transformer after providing necessary connections all as specified and directed 8 M&L for arrest the leakage of transformer oil from the LT/HT side bushings by replacing oil seals, Gaskets of, top cover, conservator tank and other parts of transformer afterdrain out the transformer at required level, tigtning the transformer nut bolts, replacing the gasket nuts, bolts, washer and refilling thestrored Transformer oilafter completion of oil arrest all as specifeid and directed.Note : (i) Spares requiredsuch as nut, bolts, washer, Gasket etc required to oil arrest shallbe deemed in quoted rate.(ii) Topping up of extra transforemer oil required to achieve desired level measured and paid seprately. (iii) HT/LT side complete bushing assemble with brass stud & oil seal shall be measured & paid under relevent items of schedule. 9 Supply only HT side bushing 22KV with oil sealfor 100 to 250 KVA 10 Supply only HT side bushing 22KV with oil seal for 300 to 500 KVA 11 Supply only LT side bushing 415Vwith oil sealfor 100 to 250KVA 12 Supply only LT side bushing 415V with oil sealfor 300 to 500 KVA 13 Replacement of breather assembly complete with silica jel in transparent container with metallic top and bottom cup with pipe entry of 15/20 mm dia, including oil bath tub all as specified and directed 14 Replacement of existing unserviceable silica gel with new crystal clear silica jel for breather of transformer all as specified and directed 15 Supply only brass spindle on LT side as per existing size, shape and specification for capacity range 100 KVA to 500 KVA all as specified and directed 16 Supply only brass spindle on HTside 22 KVas per existing size, shape and specification for capacity range 100 KVA to 500 KVA all as specified and directed 17 M&L for overhauling servicing of Tap changer and replacement of unserviceable parts as ordered with new and assembling with old serviceable parts for smooth functioning and operation all specified and directed. 18 M&L for transformerpainting with twocoat of synthetic enamel paint heat proof of same colour including preparation of old surfaces complete includuing writing the MES no in bold letter all as specified and directed. 19 M&L for painting to two pole structure with twocoats of aluminumpaintoverred oxide paint after preparation of old surfaces as per existing all as specified and directed. 20 M&L for painting to four pole structure with two coats of aluminum paint over red oxide paint after preparation of old surfaces as per existing all as specified and directed. 21 M&L for spray painting to exposed surface of steel tubular pole HT pole 11 metre long with two coats of synthetic enamel aluminium paint (as per existing colour) over a coat of red oxide primer including preparation of old painted surface by scrapping or complete removal of old paint, filling cavities with filler all as specified and directed 22 S&F in replacement of tubular aluminium alloy bus bar 12 mm thichness of 32 mm outer dia and 20 mm inner dia with colour code of Red, yellow & blue coupled with Al Clamps 120 mm Length 6 mm thickness mounted on polymer based 22 KV type insulators suitable for HT 22 KV two/four pole structures in horizontal layers duly coupled with strip jumbers, Lightning arrestors all as specified and directed 23 S&F in replacement of solid aluminium strip of 30 mm x 10 mm with colour code suitable for HT 22 KV two/four pole structures in verticle layers fixed in polyglass/epoxy & cycloaliphatic insulators duly coupled with horizantal bus bars, Lightning arrestors, drop out fuse assembly, Gang operated device all as specified and directed 24 S&F for Insulator Pin/ post type polymer based including one galvanishing MS spindle, nuts & washers for 22 KV grade and fixing to the structure all as specified and directed 25 S&F in repairs switch air break gang operated HT 22 KV Volt grade out door type, triple pole of capacity 200 amps rating mounted on Polymer based 9 insulator and fitted on steel frame horizontally mechanically operated mechanism from ground level consisting of operating rod of 25 mm bore Heavy grade GI pipe of suitable length worked from ground level and with locking arrangements including pad locks with key flat iron clamp 50 mm x 6 mm including taking down old unseviceable one all as specified and directed. Make: Pactil /Jaipuria Brothers / MEC Trivandrum 26 Supplying, installing, fixing, connecting and testing of polymer based Drop-out fuse set (set of 3 nos), mounted on insulators with steel frame 200 Amps capacity, siutable for 22KV, HT system, out door type, including Expulsion fuse carriers and fuse element Upto 25 Amp, including taking down old unserviceable one all as specified and directed 27 M&L in repais Lightning arrester high tension expulsion type complete with all fittings transmission class, discharge capacity 30 Kilo amps suitable for 22000 Volts supply including taking down old lightning arresters all as specified and directed 28 M&L for detect HT 22 KV cable faultfor various size of cable ofwith technician round the clock on Md Accn and OTM accn at Aundh Mil Stn areas detect the cable fault and necessary excavation of soil and refilling the soil, joint the faulty cable with new straight through joint kit, after jointing, testing, and charging of HT / LT cable all as specified and directed by Engr-in-Charge. Note: (i) Cable joint required size measured and paid separately (ii) Each job considered cable fault locator use in one day 29 M&L in repairs for errecting steel tubular swaged poles in true vertical position ( or to be fixed in an inclined positon as strut pole) steel tubular swaged poles complete with MS base plate of 6 mm thick of size 450x450 mm finial taper plug, pole cap, bolts, nuts and washer and screwd pole madeout of ERW MS tubing confirming to IS -2713 (part-II) 1980 type 410 SP-55 (11 meters long) pole including drilling of holes of required size and Nos for fixing of cross arms, painting with one coat of red oxide primer and two coats of aluminium paint for exposed surfaces and two coats of black bituminous paint for portion embeded in concrete.(For 2 pole Structure) all as specified and directed 30 Disconnecting ACSR conductor any type and supply and fixing ACSR conductor of any size/ type for OH line on poles insulator for jumpering connection including binding insulators with alluminium wire all as specified and directed 31 M&L for Cradles, hexagonal/rectangular, fabricated with galvanised steel wire 4 mm dia all as specified and directed. 32 M&L in repairs for cross arms, bracing, supports, clamps and back plates fabricated from structural steel section including nuts, bolts, washer, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat and one finishing coat of coat of paint all as specified and directed by Engr in charge 33 S&F in repairs Danger notice platefor HTof size 25 cm x 20 cm of 1.6mm thick mild steel sheet, veterious enamelled white with letter, fighers and conventional skull and bones with signal red colour and fixed with MS clamps, bolts and nuts all as specified and directed. 34 M&L PCC 1:4:8type D2 (using 40 mm graded crushed stone aggregate) for PCC pole/struts, stay assembly,foundation filling and mass concrete all as specified and directed. 35 M&L PCC 1:3:6type C1, (using 20 mm graded crushed stone aggregate) as in coping of pole all as specified and directed. 36 Excavation in trenches n.exc 1.50 m wide and not exc 1.5 m depth and getting out in soft / loose soil all as specified and directed. 37 Excavation in trenches n.exc 1.50 m wide and not exc 1.5 m depth and getting out in hard / dense soil all as specified and directed. 38 Excavation in trenches n.exc 1.50 m wide andexc 1.5 m depth and getting out in soft disintegratedsoil all as specified and directed. 39 Returing, filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm in soil all as specified and directed. 40 Removing excavated materials not exc 50m and depositing where directed at a level not exc 1.5m above the starting point all as specified and directed. 41 M&L for riddled earth for cushioning to under ground cable in trenchesincluding spreading, levelling handpunning and consolidateall as specified and directed. Note : For the purpose of payment only punned thickness will be measured. 42 Supplying and laying reinforcedpre cast concrete cable cover, class EHV, type-1, with peak size450mmx230mmx50mm laid in trench as protection to cable all as specified and directed 43 Taking down burnt bricks / PCC covers of any size and relaying the same after laying of cable all as directed and specified. 44 M&L for road cutting for laying GI pipe for protection of cable upto depth 90 cm including making goodthe disturbedroad and redressing the disturbed surfaces of road with filling concrete type D-2 PCC 1:4:8 (using 40 mm graded crushed stone aggregate) all as specified and directed. (For HT/LT cable) 45 S&F in repairs GI pipe size 100 mm bore, Light grade(ISI marked) laid in trenches/ path /road crossings/ fixed to poles/ceiling/ along walls/ path /drain/floors with and including all necessary clamps, nuts, bolts, washers etc and all fittings as required all as specified and directed. 46 Supply and laying HT underground cable 95 sqmm x 3 core XLPE insulated, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with sranded aluminium conductor 22000 volts grade including dismantling of old HT cables laid in trenches/passing through pipes or fixed on poles/wall/floor all as specified and directed. 47 All as per item No 40above but of Size 120 sqmm x 3 core 48 All as per item No 40above but of Size 185 sqmm x 3 core 49 All as per item No 40above but of Size 300 sqmm x 3 core 50 M&Lin repairs cable jointing kit of Size 95 sqmm x 3 core, 22 KV (Earthed) grade of cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable all as specified and directed by Engr-in-charge. 51 All as per item No 44above but ofSize 120 sqmm x 3 core to 185 Sqmm x 3 Core 52 All as per item No 44above but ofSize 240 Sqmm 3 Core to 300 sqmm x 3 core 53 M&L in repairs cable jointing kit Size 95 sqmm x 3 core for 22 KV(Earthed) grade cable for indoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable all as specified and directed. 54 All as per item No 47above but of Size 120 sqmm x 3 core to 185 Sqmm x 3 Core 55 All as per item No 47above but ofSize 240 Sqmm 3 Core to 300 sqmm x 3 core 56 M&L forheat shrinkable HT 22 KV (earthed) straight through joint Size 95 sqmm x 3 core cable kit suitable for aluminium conductor cable all as specified and directed 57 All as per item No 50above but ofSize 120 sqmm x 3 core to 185 Sqmm x 3 Core 58 All as per item No 50above but ofSize 240 Sqmm 3 Core to 300 sqmm x 3 core 59 M&L for triming of tree branches with in 2.0 mtr on either side of the electric line/ poles with suitable T & P and depositing the waste all as specified and directed. 60 M&L for cable route indicator made out of Cast ironof dia 100 mm embrosed with HT cablewith 25mm x 5 mm GI flat of lenth 1 metreincluding painting with two coats of synthetic enamel red colour paint over a coat of primer to exposed surfaces all as specified and directed by the Engineer-in-charge. 61 Maintenance, Serviceing and calibration of 22 KV HT POVCBcomprises of the following:-(a) Checking the 22 KV HT POVCB/(SF 6 type) of 1600 Amps ratingHT panel after switching off electric supply checking of mechanical system for proper functioning of upward/downward movement of HT POVCB including servicing the CR Panel& checking the mechanical system. Cleaning & servicing the fixed/moving contact & blowing out dust and applying the proper lubrication/greasing theincluding replacing the control cables as required for connection to CR panel (b) Taking out relay set ( 2 Nos over current & 01 No earth fault relay) of any make from HT 22 KV CR panel and cleaning the contact(NO+NC) by CTC solution and adjust the contact and calibrate the relay by relay testing kit & proper plug setting as per reqd load & time delay and fixing the relay set in HT panels complete all as specified and directed. Note for (a) & (b):- (i) Testing of above job to be carried out by engineers of authorised dealer/service centre of concerned OBC. (ii) Replacing new items shall be measured and paid separately as supply only. (iii) Contractor shall submit the connected document/graph for relay calibration duly authenticated by authorised dealer/service center. 62 S&F Over current /earth fault protection Relay suitable for HT CR Panel ofcapacity24 V to 240 V AC/DC, 22KV, 3 ph, 50 Hz all as specified and directed by Engineer in Charge. Make- ASHIDA/CROMPTON / L & T/ SPHNEIDER 63 S&FVacuum interrupter bottle suitable for HT POVCB ofCapacity 1250 AMP, 22KV, 3 ph, 50 Hz Panel, all as specified and directed.Make- CROMPTON /ABB and equivallent 64 S&F Spring ChargeMotor suitable for HT POVCB of240V AC, 22KV, 3 ph,50 Hzall as specified and directed Make- CROMPTON/ ABB and Equilent 65 S&F Triping /Closing coilfor POVCB of 24V DC, 22KV, 3PH, 50Hz all as specified and directed.Make- CROMPTON 66 S&F TNC Switch ON/OFF suitable for 22 KV CR panel suitable for HT POVCB ofcapacity 16AMP 4P, 22KV, 3 ph,50 Hz Panel all as specified and directed.Make- CROMPTON/ AREVA 67 M&L for Servicing 22 KV HT RMU (Ring Main Unit), type - RM6, of capacity 630A/800A, 22KV, 3 ph, 50 Hz Panel, comprising the following works. Make-C&S (a) check the auxilliry switch, shunt trip assembly, closing/Trip solenoid, limit switch and complete control wiring all as specified and directed 68 Over hauling and testing of secondary injection of over current and earth fault relay of HT RMU 22 KV panel on each multiple setting, readjustment and calibration the same complete, checking of control wiring including testing on completion all as specified and directed. 69 Supplyonly of the following material for VCBs/RMU all as specified and as directed. 70 Charging motor, single phase working on 240 volts Ac 71 Closing/tripping coil operated on 110 /30 volt system 72 Tripping coil operated on 110 /30 volt system 73 loading Spring 74 latch switch assly 75 Space heater 76 Thermostat for Space heater 77 Refilling onsite SF6 Gas, required for 22 KV VCBs/RMUs 78 M&L for cleaning of MES electric supply installations/campus by surface dressing or trimming of natural ground to remove small unequalities (including removing vegetation/ shrubs/brush wood/under growth) and carrying away the rubbish to a distance of not exc 50 mtr away for the various sub stations including spray of herbsite all as specified and directed. 79 M&L forhardcore of gauge n.exc 63mm, deposited, spread, and levelled in layers n.exc15 cm thickness (below or above ground level), water and rammed to a true shape with broken stone or boulders existing available on site and making good all as specified and directed.( Sub Station Yard) 80 M&L of Synthetic insulating mat confirming to IS 15652:2006 of size 2mx1m x3mm thick for voltage up to 22/33 kv all as specified and directed by Engr in charge.
Contract Date: Apr 28, 2026 Contract Value : ₹ 19.12 Lakh
Statutory Bodies & Commissions/Committees No of Bidders 8
Maharashtra View Result →
27.
Water Resources and Irrigation #10833438 Price Bid
Tender For Installation and energisation of Podagada-II RL LIP under Kaniha Block Civil Works (Part-A) , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Manually) , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Mechanical Means With Excavator Of Bucket Size 0.6M) , Filling Foundation And Plinth With Sand Watered And Rammed As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:4:8) With 4 Cm Size H.G Metal As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:2:4) With 12 Cm Size H.G Chips As Per Direction Of Engineer-In-Charge. , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Foundation Plinth Bend , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Column , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Lintel , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Roof Slab & Chajja , Reinforced Cement Concrete (1:2:4) With 12 Mm Size Hg Chips As Per Direction Of Engineer-In-Charge. , Supplying, Fitting And Placing Oncoated Hysd (Tiscon) Bar Reinforcement Complete As Per Drawing And Technical Specification Including Cutting, Binding, Bending And Cost Of Binding Wire. , Cost Of Ms Grill For Door, Choukath , Cost Of Iron Shutter, Windows , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Foundation And Plinth. , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Super Structure. , 2.5 Cm Thick A.S Flooring With Cement Concrete (1:2:4) Including Punning As Per Direction Of Engineer-In-Charge. , 12Mm Thick Cement Plaster (1:6 ) Over Brick Masonary As Per Direction Of Engineer-In-Charge. , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge (For Pipe Laying) , White Washing Three Coats With Shell Time As Per Direction Of Engineer-In-Charge. , Cement Punning Over Cement Plaster As Per Direction Of Engineer-In-Charge. , Painting 2 Coats With Approved Paint On New Work As Per Direction Of Engineer-In-Charge. , Distempering Two Coats To Walls With Distemper Of Approved Shade On New Work To Give An Even Shade After 1 Coat Of White Washing As Per Direction Of Engineer-In-Charge. , 20Mm Thick Cement Plaster 1:4 For Grading Plaster As Per Direction Of Engineer-In-Charge. , Supply, Fitting And Fixing Of Skylight As Per Direction Of Engineer-In-Charge. , Writing Charges Of Required Data On Display Board As Per Direction Of Engineer-In-Charge. , Cost Of Supplying Transportation And Fixing In Proper Place And Position Including Required Size Full Threaded Tvs Nut Bolt With Cement Concrete (1:2:4) As Per Site Condition , Cost Of Outlet , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , 12.5 Hp/9.375 Kw Energy Efficiency Monoblock Pump Set Of Total Head 20 Mtrs Having Discharge 1700 Lpm With Squirrel Cage Induction Motor Fitted With Bronze Impeller Tb-2 Of Is 318/1981, Companion Flanges & Class Finsulation Suitable For Operation 415 Volt +6%-15% 3 Phase, 50Hz Ac Poweer Supply Suction/Deliveery= 100Mmx100mm With Bee 3 Star Rated Energy Efficiency Pump & As Per Is-9079/2002 With Overall Efficiency 62 To 65% Of Reputed Brand Having Wide Dealership Net Work For Easy Availability Of Spares Confirming To Is Specification (A) Casing: Fc 200 As Per Is 210/1978 (B) Impeller: Bronze Grade Ltb-2 Of Is 318/1981 Including All Cost, Conveyance, Cess Etc Complete. , Control Pannel With Automatic Star Delta Starter, Sheet Steel Enclosure Suitable For Operation Of Squirrel Cage Induction Motor Up To 15 Hp With 20 Annual Periodical Maintenance (Ac -3) Duty Contractor At 415 Volt+6%-15%, 3 Phase, 50 Hz Ac Supply With Over Load Relay Range 8.9 To 13.5 Annual Periodical Maintenance & No Volt Coil With Electronic Timer Suitable For Operation At Voltage Range Of 300 To 440 V. The Starter Should Provide Dependable Protection Against Over Load And Single Phasing Fitted With Volt Meter, Ameter, Mcb In Complete Shape Including Indicator Lamp Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Empty Outdoor Irrigation Pannel Board Size (0.45Mtx0.25Mtx1.20M Of 18 Swg Cold Rolled M.S Sheet With 4 Legs Of 300 Size With One Coat Of Red Oxide Primer And Two Coats Of Smoke Grey /Navy Blue Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Mount 3Phase Starter, Main Switch And Capacitor Inside The Panel Board Vertically Over 18 Swg M.S.Sheet And The Danger Board Fixed On The Top Of The Panel Doorreputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , 63 Annual Periodical Maintenance Triple Pole Main Switch Confirming To Is No.4064(Part I & Ii) With Isi Marking Of Reputed Company Having Utilisation Capacity Cagegory Ac- 22 Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Motor Hood Size (0.45Mx0.45Mx0.60M) Made With 18 Swg (Cold Rolled M.S.Sheet With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Attachement With The Groves On Rear Side Of The Pannel Board Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge , Motor Base Plate Made With M.S Angle With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Hole For Fixing Nut & Bolt Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge. , 6 Kvar Power Shunt Capacitor With Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 3X16 Sqmm Pvc Insulated (Hd) Tropoder Armoured Electric Cable With Alluminum Conductor For Use In 3 Phase Power System Of Working Voltage Upto & Including 1100 Volts At 50Hz Confirming To Is 7098 (Pt-Ii) Of Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 4.0 Mm2 Pvc Single Core Copper Wire Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia Nominal Bore G.I.Pipe Having Wall Thickness 4.5Mm Electrical Resistance Welded Of Medium Class Confirming To Is- 1239(Part-1/2004) With Latest Ammendments, Screwed At Both Ends As Per Is-554 With Socketed At One End And The Other End Protected With Plastic Threaded Protector Including Its Transportation And Unloading At L.I.P. Site. The Socket Confirming To Isi 1239(Part Ii/1992) With Latest Ammendments In Random Length Of 4 To 7 Mtr.Each Pipe Should Bear Is Certification And Manufacturers Name/Trade Mark. (As Per Special Repair 2022) , 100Mm Dia G.I.Bend (Medium Duty) Conforming To Is No-1239 (Part Ii/1992) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I. Screw Boss Foot Valve Of Swing Type Friction Less With Single Disc Conforming To Is-4038/1979 Of Reputed Brand With Isi Mark Of Reputed Company Having Wide Dealership Network Including All Cost, Conveyance, Cess Etc Complete. (Kirloskar Make) , 100Mm Dia G.I.Flange (Medium Duty) Conforming To Is No-6392/1971 With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I.Sluice Valve Flanged Type Pn-1.0 As Per (Is-14846-2000 Standard) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. (As Per Special Repair 2022) , 100Mm Dia C.I.Double Flanged Non Return Valve Swing Type Pn-1.0 (Is-5312 (Part-I-2004) With Bypass Arrangement With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete (As Per Special Repair 2022) (Kirloskar Make) , Cost, Supplying Of 50Mm Dia Kirloskar Make C.I Double Air Release Valve Pn 1.6 With Saddle And Raiser Pipe Conforming To Is 14845 (Si) With Isi Mark Including All Cost, Conveyance, Cess Etc Complete. , Cost Of 200X200x160mm Dia Hdpe Tee. , Cost Of 160Mm Dia Hdpe End Cap. , Cost Of 200Mm Dia Hdpe End Cap. , Cost Of 100X100x25mm Dia G.I. Tee, Bend, Valve For Priming Set. , 200X100mm G.I. Reducer , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , Labour Charges For Motor, Starter Delivery And Fitting, Fixing Of Suction Including Fitting Of Priming Tee, Tee Set, Nr Valve, Sluice Valve, Air Release Valve And Minor Welding Transportation Of Materials To Site Etc. Including Nut, Bolt Rubber Insallation Etc Complete. , 160X160x160mm Hdpe Equal Tee. , 160X160x110mm G.I. Raisar Tee With Assoceries , Cost Of Butter Fly Valve , Cost Of Rubber Insertion. , Miscellaneous Expenditure If Any Such As Levelling, Cutting And Sloping Of River Bank, Cutting And Levelling Ridges/ Syphone Works Etc , Electrical Works (Part-B) , Construction And Erection Of 11 /0.4 Kv, 25 Kva Double Pole Mounted Substation With 5Mtrx3mtrx1.5Mtr Height G.I. Flat Fencing With Gate, Polymer Insulator, L.T Dist Box With Mccb, Aluminim Bus Bar Of Single Bay With Kitkat Fuse, Sand Filling And Metal Spreading With Ms Grill Gate, All Channel Matrials Should Be G.I, 7 Nos Earthing With Chamber With 3Mtr G.I Pipe Of 40Mm Dia With Connecting Of 50Mm X 6Mm G.I. Flat To All Earthing Including 25Kva Bis Level-Ii Star Rated Transformer Confirming To Re Rules 1956, Mounted On 2.44 Mtr. Long Structure, Supported In 330 Kg 10 Mtr Long Psc Pole, Transformer Hard Channel & Top Channel Made Of 3Mtr Long 100 X 50 X 6 Mm G.I. Channel, Transformer Belting On 3Mtr Long 50Mm X 50Mm X 6 Mm G.I. Angle, (All Rec Spn Std.F-3) With All Accessories Like 3 Pole 11 Kv Hg Fuse (F-5) & A.B. Switches (F-9) Both Mounted On 3Mtr Long 75Mm X 40Mm X 4.8 Mm G.I. Channel And Supported By 1.0 M Long 50 X 50 X 5 Mm G.I. Angle, With 3 No. 11 Kv Lightening Arrestors And Danger Board At Each Pole, Anti Climbing Devices & All Other Necessary Fittings I.E Required Size Nuts & Bolts, Brackets, Cable, Cable Sockets As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase 11 Kv Ht Line As Per Rec Standard Confirming To Ie Rules 1956 With 330 Kg 10 M Long Psc Pole With 55 Sqmm Aaac Xlpe Covered Conductor Average Span 50Mtr, 11 Kv V Cross Arm Required No. Of 11 Kv T & C Disc. Polymer Insulators In Tension Point & 11 Kv Pin Polymer Insulators, Couping & Padding Of Poles With All G.I.Channels. Danger Board At Each Pole, Anti Climbing Devices, Stay Set At Bending Point & Double Stay At End Point With 18 Mm G.I.H.T. Stay, Concreting Of Stay With Anchor Plate, Guarding At Road Crossings Etc If Required. Including Cost Of All Materials, Labour Transportation, Inspection & Commissioning Etc. Complete As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 90 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liasioning For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase L.T Line As Per Rec Standard Confirming To Re Rule 1956 With 300Kg 9 Mtr Long Psc Pole Support In 33 Mtr Span Length With 4X35mm² + 1X35 Mm ² Lt, Xlpe Ab Cable With Coil Earthing Device, Lt Dead End Clam, Suspension Clamp With G I Hook, Stay Accessories Such As Wire Insulator , Clamp Etc. Nut Bolts, Alongwith Concreting Copping & Padding Of Poles And Stayset As Per Direction Of Engineer In Charge As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour , Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Electrical Earthing With 40Mm Dia Medium Duty Gi Earthing Pipe Each 3 M Longwith Installation Including Cost Of All Materials Like Gi Flange Chorcoat, Salf Etc. As Required As Per I.E Rule , Other Electrical Materials Such As Pvc Tape.7/20Pvc Copper Wire 3/20 Pvc Copper Wire G.I Flxible Condite Pipe No 6 Gi Wire Copper Cable Socket Gi Socket And Petty Materials Required For Electrical Installation. All Materials Should Be As Per Is Including Fitting Charges , Cost Of Document Which Includes Pre And Post Photograph (2 Copies) Power Supply Agreement Of Pani Panchayat Office Bearers With Tpcodl Authorities, Handing Over Documents (Agreement) Of Pani Panchayat With Olic Authority Recording Of Latitude And Longitude Etc Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 11
Odisha View Result →
28.
Water Resources and Irrigation #10833437 Price Bid
Tender For Installation and energisation of Luhamunda, Mandab RL LIP under Kishorenagar Block , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Manually) , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Mechanical Means With Excavator Of Bucket Size 0.6M) , Filling Foundation And Plinth With Sand Watered And Rammed As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:4:8) With 4 Cm Size H.G Metal As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:2:4) With 12 Cm Size H.G Chips As Per Direction Of Engineer-In-Charge. , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Foundation Plinth Bend , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Column , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Lintel , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Roof Slab & Chajja , Reinforced Cement Concrete (1:2:4) With 12 Mm Size Hg Chips As Per Direction Of Engineer-In-Charge. , Supplying, Fitting And Placing Oncoated Hysd (Tiscon) Bar Reinforcement Complete As Per Drawing And Technical Specification Including Cutting, Binding, Bending And Cost Of Binding Wire. , Cost Of Ms Grill For Door, Choukath , Cost Of Iron Shutter, Windows , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Foundation And Plinth. , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Super Structure. , 2.5 Cm Thick A.S Flooring With Cement Concrete (1:2:4) Including Punning As Per Direction Of Engineer-In-Charge. , 12Mm Thick Cement Plaster (1:6 ) Over Brick Masonary As Per Direction Of Engineer-In-Charge. , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge (For Pipe Laying) , White Washing Three Coats With Shell Time As Per Direction Of Engineer-In-Charge. , Cement Punning Over Cement Plaster As Per Direction Of Engineer-In-Charge. , Painting 2 Coats With Approved Paint On New Work As Per Direction Of Engineer-In-Charge. , Distempering Two Coats To Walls With Distemper Of Approved Shade On New Work To Give An Even Shade After 1 Coat Of White Washing As Per Direction Of Engineer-In-Charge. , 20Mm Thick Cement Plaster 1:4 For Grading Plaster As Per Direction Of Engineer-In-Charge. , Supply, Fitting And Fixing Of Skylight As Per Direction Of Engineer-In-Charge. , Writing Charges Of Required Data On Display Board As Per Direction Of Engineer-In-Charge. , Cost Of Supplying Transportation And Fixing In Proper Place And Position Including Required Size Full Threaded Tvs Nut Bolt With Cement Concrete (1:2:4) As Per Site Condition , Cost Of Outlet , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , 12.5 Hp/9.375 Kw Energy Efficiency Monoblock Pump Set Of Total Head 20 Mtrs Having Discharge 1700 Lpm With Squirrel Cage Induction Motor Fitted With Bronze Impeller Tb-2 Of Is 318/1981, Companion Flanges & Class Finsulation Suitable For Operation 415 Volt +6%-15% 3 Phase, 50Hz Ac Poweer Supply Suction/Deliveery= 100Mmx100mm With Bee 3 Star Rated Energy Efficiency Pump & As Per Is-9079/2002 With Overall Efficiency 62 To 65% Of Reputed Brand Having Wide Dealership Net Work For Easy Availability Of Spares Confirming To Is Specification (A) Casing: Fc 200 As Per Is 210/1978 (B) Impeller: Bronze Grade Ltb-2 Of Is 318/1981 Including All Cost, Conveyance, Cess Etc Complete. , Control Pannel With Automatic Star Delta Starter, Sheet Steel Enclosure Suitable For Operation Of Squirrel Cage Induction Motor Up To 15 Hp With 20 Annual Periodical Maintenance (Ac -3) Duty Contractor At 415 Volt+6%-15%, 3 Phase, 50 Hz Ac Supply With Over Load Relay Range 8.9 To 13.5 Annual Periodical Maintenance & No Volt Coil With Electronic Timer Suitable For Operation At Voltage Range Of 300 To 440 V. The Starter Should Provide Dependable Protection Against Over Load And Single Phasing Fitted With Volt Meter, Ameter, Mcb In Complete Shape Including Indicator Lamp Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Empty Outdoor Irrigation Pannel Board Size (0.45Mtx0.25Mtx1.20M Of 18 Swg Cold Rolled M.S Sheet With 4 Legs Of 300 Size With One Coat Of Red Oxide Primer And Two Coats Of Smoke Grey /Navy Blue Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Mount 3Phase Starter, Main Switch And Capacitor Inside The Panel Board Vertically Over 18 Swg M.S.Sheet And The Danger Board Fixed On The Top Of The Panel Doorreputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , 63 Annual Periodical Maintenance Triple Pole Main Switch Confirming To Is No.4064(Part I & Ii) With Isi Marking Of Reputed Company Having Utilisation Capacity Cagegory Ac- 22 Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Motor Hood Size (0.45Mx0.45Mx0.60M) Made With 18 Swg (Cold Rolled M.S.Sheet With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Attachement With The Groves On Rear Side Of The Pannel Board Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge , Motor Base Plate Made With M.S Angle With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Hole For Fixing Nut & Bolt Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge. , 6 Kvar Power Shunt Capacitor With Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 3X16 Sqmm Pvc Insulated (Hd) Tropoder Armoured Electric Cable With Alluminum Conductor For Use In 3 Phase Power System Of Working Voltage Upto & Including 1100 Volts At 50Hz Confirming To Is 7098 (Pt-Ii) Of Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 4.0 Mm2 Pvc Single Core Copper Wire Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia Nominal Bore G.I.Pipe Having Wall Thickness 4.5Mm Electrical Resistance Welded Of Medium Class Confirming To Is- 1239(Part-1/2004) With Latest Ammendments, Screwed At Both Ends As Per Is-554 With Socketed At One End And The Other End Protected With Plastic Threaded Protector Including Its Transportation And Unloading At L.I.P. Site. The Socket Confirming To Isi 1239(Part Ii/1992) With Latest Ammendments In Random Length Of 4 To 7 Mtr.Each Pipe Should Bear Is Certification And Manufacturers Name/Trade Mark. (As Per Special Repair 2022) , 100Mm Dia G.I.Bend (Medium Duty) Conforming To Is No-1239 (Part Ii/1992) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I. Screw Boss Foot Valve Of Swing Type Friction Less With Single Disc Conforming To Is-4038/1979 Of Reputed Brand With Isi Mark Of Reputed Company Having Wide Dealership Network Including All Cost, Conveyance, Cess Etc Complete. (Kirloskar Make) , 100Mm Dia G.I.Flange (Medium Duty) Conforming To Is No-6392/1971 With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I.Sluice Valve Flanged Type Pn-1.0 As Per (Is-14846-2000 Standard) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. (As Per Special Repair 2022) , 100Mm Dia C.I.Double Flanged Non Return Valve Swing Type Pn-1.0 (Is-5312 (Part-I-2004) With Bypass Arrangement With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete (As Per Special Repair 2022) (Kirloskar Make) , Cost, Supplying Of 50Mm Dia Kirloskar Make C.I Double Air Release Valve Pn 1.6 With Saddle And Raiser Pipe Conforming To Is 14845 (Si) With Isi Mark Including All Cost, Conveyance, Cess Etc Complete. , Cost Of 200X200x160mm Dia Hdpe Tee. , Cost Of 160Mm Dia Hdpe End Cap. , Cost Of 200Mm Dia Hdpe End Cap. , Cost Of 100X100x25mm Dia G.I. Tee, Bend, Valve For Priming Set. , 200X100mm G.I. Reducer , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , Labour Charges For Motor, Starter Delivery And Fitting, Fixing Of Suction Including Fitting Of Priming Tee, Tee Set, Nr Valve, Sluice Valve, Air Release Valve And Minor Welding Transportation Of Materials To Site Etc. Including Nut, Bolt Rubber Insallation Etc Complete. , 160X160x160mm Hdpe Equal Tee. , 160X160x110mm G.I. Raisar Tee With Assoceries , Cost Of Butter Fly Valve , Cost Of Rubber Insertion. , Miscellaneous Expenditure If Any Such As Levelling, Cutting And Sloping Of River Bank, Cutting And Levelling Ridges/ Syphone Works Etc , Electrical Works (Part-B) , Construction And Erection Of 11 /0.4 Kv, 25 Kva Double Pole Mounted Substation With 5Mtrx3mtrx1.5Mtr Height G.I. Flat Fencing With Gate, Polymer Insulator, L.T Dist Box With Mccb, Aluminim Bus Bar Of Single Bay With Kitkat Fuse, Sand Filling And Metal Spreading With Ms Grill Gate, All Channel Matrials Should Be G.I, 7 Nos Earthing With Chamber With 3Mtr G.I Pipe Of 40Mm Dia With Connecting Of 50Mm X 6Mm G.I. Flat To All Earthing Including 25Kva Bis Level-Ii Star Rated Transformer Confirming To Re Rules 1956, Mounted On 2.44 Mtr. Long Structure, Supported In 330 Kg 10 Mtr Long Psc Pole, Transformer Hard Channel & Top Channel Made Of 3Mtr Long 100 X 50 X 6 Mm G.I. Channel, Transformer Belting On 3Mtr Long 50Mm X 50Mm X 6 Mm G.I. Angle, (All Rec Spn Std.F-3) With All Accessories Like 3 Pole 11 Kv Hg Fuse (F-5) & A.B. Switches (F-9) Both Mounted On 3Mtr Long 75Mm X 40Mm X 4.8 Mm G.I. Channel And Supported By 1.0 M Long 50 X 50 X 5 Mm G.I. Angle, With 3 No. 11 Kv Lightening Arrestors And Danger Board At Each Pole, Anti Climbing Devices & All Other Necessary Fittings I.E Required Size Nuts & Bolts, Brackets, Cable, Cable Sockets As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase 11 Kv Ht Line As Per Rec Standard Confirming To Ie Rules 1956 With 330 Kg 10 M Long Psc Pole With 55 Sqmm Aaac Xlpe Covered Conductor Average Span 50Mtr, 11 Kv V Cross Arm Required No. Of 11 Kv T & C Disc. Polymer Insulators In Tension Point & 11 Kv Pin Polymer Insulators, Couping & Padding Of Poles With All G.I.Channels. Danger Board At Each Pole, Anti Climbing Devices, Stay Set At Bending Point & Double Stay At End Point With 18 Mm G.I.H.T. Stay, Concreting Of Stay With Anchor Plate, Guarding At Road Crossings Etc If Required. Including Cost Of All Materials, Labour Transportation, Inspection & Commissioning Etc. Complete As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 90 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liasioning For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Electrical Earthing With 40Mm Dia Medium Duty Gi Earthing Pipe Each 3 M Longwith Installation Including Cost Of All Materials Like Gi Flange Chorcoat, Salf Etc. As Required As Per I.E Rule , Other Electrical Materials Such As Pvc Tape.7/20Pvc Copper Wire 3/20 Pvc Copper Wire G.I Flxible Condite Pipe No 6 Gi Wire Copper Cable Socket Gi Socket And Petty Materials Required For Electrical Installation. All Materials Should Be As Per Is Including Fitting Charges , Cost Of Document Which Includes Pre And Post Photograph (2 Copies) Power Supply Agreement Of Pani Panchayat Office Bearers With Tpcodl Authorities, Handing Over Documents (Agreement) Of Pani Panchayat With Olic Authority Recording Of Latitude And Longitude Etc Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 13
Odisha View Result →
29.
Water Resources and Irrigation #10833436 Price Bid
Tender For Installation and energisation of Mankadchua-II, Angapada-IV RL LIP under Kishorenagar Block , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Manually) , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Mechanical Means With Excavator Of Bucket Size 0.6M) , Filling Foundation And Plinth With Sand Watered And Rammed As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:4:8) With 4 Cm Size H.G Metal As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:2:4) With 12 Cm Size H.G Chips As Per Direction Of Engineer-In-Charge. , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Foundation Plinth Bend , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Column , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Lintel , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Roof Slab & Chajja , Reinforced Cement Concrete (1:2:4) With 12 Mm Size Hg Chips As Per Direction Of Engineer-In-Charge. , Supplying, Fitting And Placing Oncoated Hysd (Tiscon) Bar Reinforcement Complete As Per Drawing And Technical Specification Including Cutting, Binding, Bending And Cost Of Binding Wire. , Cost Of Ms Grill For Door, Choukath , Cost Of Iron Shutter, Windows , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Foundation And Plinth. , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Super Structure. , 2.5 Cm Thick A.S Flooring With Cement Concrete (1:2:4) Including Punning As Per Direction Of Engineer-In-Charge. , 12Mm Thick Cement Plaster (1:6 ) Over Brick Masonary As Per Direction Of Engineer-In-Charge. , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge (For Pipe Laying) , White Washing Three Coats With Shell Time As Per Direction Of Engineer-In-Charge. , Cement Punning Over Cement Plaster As Per Direction Of Engineer-In-Charge. , Painting 2 Coats With Approved Paint On New Work As Per Direction Of Engineer-In-Charge. , Distempering Two Coats To Walls With Distemper Of Approved Shade On New Work To Give An Even Shade After 1 Coat Of White Washing As Per Direction Of Engineer-In-Charge. , 20Mm Thick Cement Plaster 1:4 For Grading Plaster As Per Direction Of Engineer-In-Charge. , Supply, Fitting And Fixing Of Skylight As Per Direction Of Engineer-In-Charge. , Writing Charges Of Required Data On Display Board As Per Direction Of Engineer-In-Charge. , Cost Of Supplying Transportation And Fixing In Proper Place And Position Including Required Size Full Threaded Tvs Nut Bolt With Cement Concrete (1:2:4) As Per Site Condition , Cost Of Outlet , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , 12.5 Hp/9.375 Kw Energy Efficiency Monoblock Pump Set Of Total Head 20 Mtrs Having Discharge 1700 Lpm With Squirrel Cage Induction Motor Fitted With Bronze Impeller Tb-2 Of Is 318/1981, Companion Flanges & Class Finsulation Suitable For Operation 415 Volt +6%-15% 3 Phase, 50Hz Ac Poweer Supply Suction/Deliveery= 100Mmx100mm With Bee 3 Star Rated Energy Efficiency Pump & As Per Is-9079/2002 With Overall Efficiency 62 To 65% Of Reputed Brand Having Wide Dealership Net Work For Easy Availability Of Spares Confirming To Is Specification (A) Casing: Fc 200 As Per Is 210/1978 (B) Impeller: Bronze Grade Ltb-2 Of Is 318/1981 Including All Cost, Conveyance, Cess Etc Complete. , Control Pannel With Automatic Star Delta Starter, Sheet Steel Enclosure Suitable For Operation Of Squirrel Cage Induction Motor Up To 15 Hp With 20 Annual Periodical Maintenance (Ac -3) Duty Contractor At 415 Volt+6%-15%, 3 Phase, 50 Hz Ac Supply With Over Load Relay Range 8.9 To 13.5 Annual Periodical Maintenance & No Volt Coil With Electronic Timer Suitable For Operation At Voltage Range Of 300 To 440 V. The Starter Should Provide Dependable Protection Against Over Load And Single Phasing Fitted With Volt Meter, Ameter, Mcb In Complete Shape Including Indicator Lamp Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Empty Outdoor Irrigation Pannel Board Size (0.45Mtx0.25Mtx1.20M Of 18 Swg Cold Rolled M.S Sheet With 4 Legs Of 300 Size With One Coat Of Red Oxide Primer And Two Coats Of Smoke Grey /Navy Blue Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Mount 3Phase Starter, Main Switch And Capacitor Inside The Panel Board Vertically Over 18 Swg M.S.Sheet And The Danger Board Fixed On The Top Of The Panel Doorreputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , 63 Annual Periodical Maintenance Triple Pole Main Switch Confirming To Is No.4064(Part I & Ii) With Isi Marking Of Reputed Company Having Utilisation Capacity Cagegory Ac- 22 Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Motor Hood Size (0.45Mx0.45Mx0.60M) Made With 18 Swg (Cold Rolled M.S.Sheet With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Attachement With The Groves On Rear Side Of The Pannel Board Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge , Motor Base Plate Made With M.S Angle With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Hole For Fixing Nut & Bolt Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge. , 6 Kvar Power Shunt Capacitor With Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 3X16 Sqmm Pvc Insulated (Hd) Tropoder Armoured Electric Cable With Alluminum Conductor For Use In 3 Phase Power System Of Working Voltage Upto & Including 1100 Volts At 50Hz Confirming To Is 7098 (Pt-Ii) Of Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 4.0 Mm2 Pvc Single Core Copper Wire Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia Nominal Bore G.I.Pipe Having Wall Thickness 4.5Mm Electrical Resistance Welded Of Medium Class Confirming To Is- 1239(Part-1/2004) With Latest Ammendments, Screwed At Both Ends As Per Is-554 With Socketed At One End And The Other End Protected With Plastic Threaded Protector Including Its Transportation And Unloading At L.I.P. Site. The Socket Confirming To Isi 1239(Part Ii/1992) With Latest Ammendments In Random Length Of 4 To 7 Mtr.Each Pipe Should Bear Is Certification And Manufacturers Name/Trade Mark. (As Per Special Repair 2022) , 100Mm Dia G.I.Bend (Medium Duty) Conforming To Is No-1239 (Part Ii/1992) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I. Screw Boss Foot Valve Of Swing Type Friction Less With Single Disc Conforming To Is-4038/1979 Of Reputed Brand With Isi Mark Of Reputed Company Having Wide Dealership Network Including All Cost, Conveyance, Cess Etc Complete. (Kirloskar Make) , 100Mm Dia G.I.Flange (Medium Duty) Conforming To Is No-6392/1971 With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I.Sluice Valve Flanged Type Pn-1.0 As Per (Is-14846-2000 Standard) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. (As Per Special Repair 2022) , 100Mm Dia C.I.Double Flanged Non Return Valve Swing Type Pn-1.0 (Is-5312 (Part-I-2004) With Bypass Arrangement With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete (As Per Special Repair 2022) (Kirloskar Make) , Cost, Supplying Of 50Mm Dia Kirloskar Make C.I Double Air Release Valve Pn 1.6 With Saddle And Raiser Pipe Conforming To Is 14845 (Si) With Isi Mark Including All Cost, Conveyance, Cess Etc Complete. , Cost Of 200X200x160mm Dia Hdpe Tee. , Cost Of 160Mm Dia Hdpe End Cap. , Cost Of 200Mm Dia Hdpe End Cap. , Cost Of 100X100x25mm Dia G.I. Tee, Bend, Valve For Priming Set. , 200X100mm G.I. Reducer , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , Labour Charges For Motor, Starter Delivery And Fitting, Fixing Of Suction Including Fitting Of Priming Tee, Tee Set, Nr Valve, Sluice Valve, Air Release Valve And Minor Welding Transportation Of Materials To Site Etc. Including Nut, Bolt Rubber Insallation Etc Complete. , 160X160x160mm Hdpe Equal Tee. , 160X160x110mm G.I. Raisar Tee With Assoceries , Cost Of Butter Fly Valve , Cost Of Rubber Insertion. , Miscellaneous Expenditure If Any Such As Levelling, Cutting And Sloping Of River Bank, Cutting And Levelling Ridges/ Syphone Works Etc , Electrical Works (Part-B) , Construction And Erection Of 11 /0.4 Kv, 25 Kva Double Pole Mounted Substation With 5Mtrx3mtrx1.5Mtr Height G.I. Flat Fencing With Gate, Polymer Insulator, L.T Dist Box With Mccb, Aluminim Bus Bar Of Single Bay With Kitkat Fuse, Sand Filling And Metal Spreading With Ms Grill Gate, All Channel Matrials Should Be G.I, 7 Nos Earthing With Chamber With 3Mtr G.I Pipe Of 40Mm Dia With Connecting Of 50Mm X 6Mm G.I. Flat To All Earthing Including 25Kva Bis Level-Ii Star Rated Transformer Confirming To Re Rules 1956, Mounted On 2.44 Mtr. Long Structure, Supported In 330 Kg 10 Mtr Long Psc Pole, Transformer Hard Channel & Top Channel Made Of 3Mtr Long 100 X 50 X 6 Mm G.I. Channel, Transformer Belting On 3Mtr Long 50Mm X 50Mm X 6 Mm G.I. Angle, (All Rec Spn Std.F-3) With All Accessories Like 3 Pole 11 Kv Hg Fuse (F-5) & A.B. Switches (F-9) Both Mounted On 3Mtr Long 75Mm X 40Mm X 4.8 Mm G.I. Channel And Supported By 1.0 M Long 50 X 50 X 5 Mm G.I. Angle, With 3 No. 11 Kv Lightening Arrestors And Danger Board At Each Pole, Anti Climbing Devices & All Other Necessary Fittings I.E Required Size Nuts & Bolts, Brackets, Cable, Cable Sockets As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase 11 Kv Ht Line As Per Rec Standard Confirming To Ie Rules 1956 With 330 Kg 10 M Long Psc Pole With 55 Sqmm Aaac Xlpe Covered Conductor Average Span 50Mtr, 11 Kv V Cross Arm Required No. Of 11 Kv T & C Disc. Polymer Insulators In Tension Point & 11 Kv Pin Polymer Insulators, Couping & Padding Of Poles With All G.I.Channels. Danger Board At Each Pole, Anti Climbing Devices, Stay Set At Bending Point & Double Stay At End Point With 18 Mm G.I.H.T. Stay, Concreting Of Stay With Anchor Plate, Guarding At Road Crossings Etc If Required. Including Cost Of All Materials, Labour Transportation, Inspection & Commissioning Etc. Complete As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 90 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liasioning For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 180 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 330Kg 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Electrical Earthing With 40Mm Dia Medium Duty Gi Earthing Pipe Each 3 M Longwith Installation Including Cost Of All Materials Like Gi Flange Chorcoat, Salf Etc. As Required As Per I.E Rule , Other Electrical Materials Such As Pvc Tape.7/20Pvc Copper Wire 3/20 Pvc Copper Wire G.I Flxible Condite Pipe No 6 Gi Wire Copper Cable Socket Gi Socket And Petty Materials Required For Electrical Installation. All Materials Should Be As Per Is Including Fitting Charges , Cost Of Document Which Includes Pre And Post Photograph (2 Copies) Power Supply Agreement Of Pani Panchayat Office Bearers With Tpcodl Authorities, Handing Over Documents (Agreement) Of Pani Panchayat With Olic Authority Recording Of Latitude And Longitude Etc Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 13
Odisha View Result →
30.
Water Resources and Irrigation #10832351 Price Bid
Tender For Installation and energisation of Badasada-II, Narayanachandrapur, Nuthuripasi RL LIP under Pallahara Block , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Manually) , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Mechanical Means With Excavator Of Bucket Size 0.6M) , Filling Foundation And Plinth With Sand Watered And Rammed As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:4:8) With 4 Cm Size H.G Metal As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:2:4) With 12 Cm Size H.G Chips As Per Direction Of Engineer-In-Charge. , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Foundation Plinth Bend , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Column , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Lintel , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Roof Slab & Chajja , Reinforced Cement Concrete (1:2:4) With 12 Mm Size Hg Chips As Per Direction Of Engineer-In-Charge. , Supplying, Fitting And Placing Oncoated Hysd (Tiscon) Bar Reinforcement Complete As Per Drawing And Technical Specification Including Cutting, Binding, Bending And Cost Of Binding Wire. , Cost Of Ms Grill For Door, Choukath , Cost Of Iron Shutter, Windows , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Foundation And Plinth. , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Super Structure. , 2.5 Cm Thick A.S Flooring With Cement Concrete (1:2:4) Including Punning As Per Direction Of Engineer-In-Charge. , 12Mm Thick Cement Plaster (1:6 ) Over Brick Masonary As Per Direction Of Engineer-In-Charge. , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge (For Pipe Laying) , White Washing Three Coats With Shell Time As Per Direction Of Engineer-In-Charge. , Cement Punning Over Cement Plaster As Per Direction Of Engineer-In-Charge. , Painting 2 Coats With Approved Paint On New Work As Per Direction Of Engineer-In-Charge. , Distempering Two Coats To Walls With Distemper Of Approved Shade On New Work To Give An Even Shade After 1 Coat Of White Washing As Per Direction Of Engineer-In-Charge. , 20Mm Thick Cement Plaster 1:4 For Grading Plaster As Per Direction Of Engineer-In-Charge. , Supply, Fitting And Fixing Of Skylight As Per Direction Of Engineer-In-Charge. , Writing Charges Of Required Data On Display Board As Per Direction Of Engineer-In-Charge. , Cost Of Supplying Transportation And Fixing In Proper Place And Position Including Required Size Full Threaded Tvs Nut Bolt With Cement Concrete (1:2:4) As Per Site Condition , Cost Of Outlet , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , 12.5 Hp/9.375 Kw Energy Efficiency Monoblock Pump Set Of Total Head 20 Mtrs Having Discharge 1700 Lpm With Squirrel Cage Induction Motor Fitted With Bronze Impeller Tb-2 Of Is 318/1981, Companion Flanges & Class Finsulation Suitable For Operation 415 Volt +6%-15% 3 Phase, 50Hz Ac Poweer Supply Suction/Deliveery= 100Mmx100mm With Bee 3 Star Rated Energy Efficiency Pump & As Per Is-9079/2002 With Overall Efficiency 62 To 65% Of Reputed Brand Having Wide Dealership Net Work For Easy Availability Of Spares Confirming To Is Specification (A) Casing: Fc 200 As Per Is 210/1978 (B) Impeller: Bronze Grade Ltb-2 Of Is 318/1981 Including All Cost, Conveyance, Cess Etc Complete. , Control Pannel With Automatic Star Delta Starter, Sheet Steel Enclosure Suitable For Operation Of Squirrel Cage Induction Motor Up To 15 Hp With 20 Annual Periodical Maintenance (Ac -3) Duty Contractor At 415 Volt+6%-15%, 3 Phase, 50 Hz Ac Supply With Over Load Relay Range 8.9 To 13.5 Annual Periodical Maintenance & No Volt Coil With Electronic Timer Suitable For Operation At Voltage Range Of 300 To 440 V. The Starter Should Provide Dependable Protection Against Over Load And Single Phasing Fitted With Volt Meter, Ameter, Mcb In Complete Shape Including Indicator Lamp Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Empty Outdoor Irrigation Pannel Board Size (0.45Mtx0.25Mtx1.20M Of 18 Swg Cold Rolled M.S Sheet With 4 Legs Of 300 Size With One Coat Of Red Oxide Primer And Two Coats Of Smoke Grey /Navy Blue Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Mount 3Phase Starter, Main Switch And Capacitor Inside The Panel Board Vertically Over 18 Swg M.S.Sheet And The Danger Board Fixed On The Top Of The Panel Doorreputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , 63 Annual Periodical Maintenance Triple Pole Main Switch Confirming To Is No.4064(Part I & Ii) With Isi Marking Of Reputed Company Having Utilisation Capacity Cagegory Ac- 22 Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Motor Hood Size (0.45Mx0.45Mx0.60M) Made With 18 Swg (Cold Rolled M.S.Sheet With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Attachement With The Groves On Rear Side Of The Pannel Board Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge , Motor Base Plate Made With M.S Angle With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Hole For Fixing Nut & Bolt Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge. , 6 Kvar Power Shunt Capacitor With Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 3X16 Sqmm Pvc Insulated (Hd) Tropoder Armoured Electric Cable With Alluminum Conductor For Use In 3 Phase Power System Of Working Voltage Upto & Including 1100 Volts At 50Hz Confirming To Is 7098 (Pt-Ii) Of Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 4.0 Mm2 Pvc Single Core Copper Wire Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia Nominal Bore G.I.Pipe Having Wall Thickness 4.5Mm Electrical Resistance Welded Of Medium Class Confirming To Is- 1239(Part-1/2004) With Latest Ammendments, Screwed At Both Ends As Per Is-554 With Socketed At One End And The Other End Protected With Plastic Threaded Protector Including Its Transportation And Unloading At L.I.P. Site. The Socket Confirming To Isi 1239(Part Ii/1992) With Latest Ammendments In Random Length Of 4 To 7 Mtr.Each Pipe Should Bear Is Certification And Manufacturers Name/Trade Mark. (As Per Special Repair 2022) , 100Mm Dia G.I.Bend (Medium Duty) Conforming To Is No-1239 (Part Ii/1992) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I. Screw Boss Foot Valve Of Swing Type Friction Less With Single Disc Conforming To Is-4038/1979 Of Reputed Brand With Isi Mark Of Reputed Company Having Wide Dealership Network Including All Cost, Conveyance, Cess Etc Complete. (Kirloskar Make) , 100Mm Dia G.I.Flange (Medium Duty) Conforming To Is No-6392/1971 With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I.Sluice Valve Flanged Type Pn-1.0 As Per (Is-14846-2000 Standard) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. (As Per Special Repair 2022) , 100Mm Dia C.I.Double Flanged Non Return Valve Swing Type Pn-1.0 (Is-5312 (Part-I-2004) With Bypass Arrangement With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete (As Per Special Repair 2022) (Kirloskar Make) , Cost, Supplying Of 50Mm Dia Kirloskar Make C.I Double Air Release Valve Pn 1.6 With Saddle And Raiser Pipe Conforming To Is 14845 (Si) With Isi Mark Including All Cost, Conveyance, Cess Etc Complete. , Cost Of 200X200x160mm Dia Hdpe Tee. , Cost Of 160Mm Dia Hdpe End Cap. , Cost Of 200Mm Dia Hdpe End Cap. , Cost Of 100X100x25mm Dia G.I. Tee, Bend, Valve For Priming Set. , 200X100mm G.I. Reducer , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , Labour Charges For Motor, Starter Delivery And Fitting, Fixing Of Suction Including Fitting Of Priming Tee, Tee Set, Nr Valve, Sluice Valve, Air Release Valve And Minor Welding Transportation Of Materials To Site Etc. Including Nut, Bolt Rubber Insallation Etc Complete. , 160X160x160mm Hdpe Equal Tee. , 160X160x110mm G.I. Raisar Tee With Assoceries , Cost Of Butter Fly Valve , Cost Of Rubber Insertion. , Miscellaneous Expenditure If Any Such As Levelling, Cutting And Sloping Of River Bank, Cutting And Levelling Ridges/ Syphone Works Etc , Electrical Works (Part-B) , Construction And Erection Of 11 /0.4 Kv, 25 Kva Double Pole Mounted Substation With 5Mtrx3mtrx1.5Mtr Height G.I. Flat Fencing With Gate, Polymer Insulator, L.T Dist Box With Mccb, Aluminim Bus Bar Of Single Bay With Kitkat Fuse, Sand Filling And Metal Spreading With Ms Grill Gate, All Channel Matrials Should Be G.I, 7 Nos Earthing With Chamber With 3Mtr G.I Pipe Of 40Mm Dia With Connecting Of 50Mm X 6Mm G.I. Flat To All Earthing Including 25Kva Bis Level-Ii Star Rated Transformer Confirming To Re Rules 1956, Mounted On 2.44 Mtr. Long Structure, Supported In 330 Kg 10 Mtr Long Psc Pole, Transformer Hard Channel & Top Channel Made Of 3Mtr Long 100 X 50 X 6 Mm G.I. Channel, Transformer Belting On 3Mtr Long 50Mm X 50Mm X 6 Mm G.I. Angle, (All Rec Spn Std.F-3) With All Accessories Like 3 Pole 11 Kv Hg Fuse (F-5) & A.B. Switches (F-9) Both Mounted On 3Mtr Long 75Mm X 40Mm X 4.8 Mm G.I. Channel And Supported By 1.0 M Long 50 X 50 X 5 Mm G.I. Angle, With 3 No. 11 Kv Lightening Arrestors And Danger Board At Each Pole, Anti Climbing Devices & All Other Necessary Fittings I.E Required Size Nuts & Bolts, Brackets, Cable, Cable Sockets As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase 11 Kv Ht Line As Per Rec Standard Confirming To Ie Rules 1956 With 330 Kg 10 M Long Psc Pole With 55 Sqmm Aaac Xlpe Covered Conductor Average Span 50Mtr, 11 Kv V Cross Arm Required No. Of 11 Kv T & C Disc. Polymer Insulators In Tension Point & 11 Kv Pin Polymer Insulators, Couping & Padding Of Poles With All G.I.Channels. Danger Board At Each Pole, Anti Climbing Devices, Stay Set At Bending Point & Double Stay At End Point With 18 Mm G.I.H.T. Stay, Concreting Of Stay With Anchor Plate, Guarding At Road Crossings Etc If Required. Including Cost Of All Materials, Labour Transportation, Inspection & Commissioning Etc. Complete As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 90 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liasioning For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 180 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 330Kg 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase L.T Line As Per Rec Standard Confirming To Re Rule 1956 With 300Kg 9 Mtr Long Psc Pole Support In 33 Mtr Span Length With 4X35mm² + 1X35 Mm ² Lt, Xlpe Ab Cable With Coil Earthing Device, Lt Dead End Clam, Suspension Clamp With G I Hook, Stay Accessories Such As Wire Insulator , Clamp Etc. Nut Bolts, Alongwith Concreting Copping & Padding Of Poles And Stayset As Per Direction Of Engineer In Charge As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour , Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Electrical Earthing With 40Mm Dia Medium Duty Gi Earthing Pipe Each 3 M Longwith Installation Including Cost Of All Materials Like Gi Flange Chorcoat, Salf Etc. As Required As Per I.E Rule , Other Electrical Materials Such As Pvc Tape.7/20Pvc Copper Wire 3/20 Pvc Copper Wire G.I Flxible Condite Pipe No 6 Gi Wire Copper Cable Socket Gi Socket And Petty Materials Required For Electrical Installation. All Materials Should Be As Per Is Including Fitting Charges , Cost Of Document Which Includes Pre And Post Photograph (2 Copies) Power Supply Agreement Of Pani Panchayat Office Bearers With Tpcodl Authorities, Handing Over Documents (Agreement) Of Pani Panchayat With Olic Authority Recording Of Latitude And Longitude Etc Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 12
Odisha View Result →
31.
Water Resources and Irrigation #10832350 Price Bid
Tender For Installation and energisation of Rajamunda-II, Rajamunda-III, Kantala-III RL LIP under Pallahara Block , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Manually) , Earth Work Excavation In Foundation In Hard Soil With 50 Mtr Initial Lead 1.5 M Initial Lift Including Rough Dressing And Breaking Clods To 2 Cm To 7 Cm And Laying In Layers Not Exceeding 0.3 M In Depth As Per Direction Of Engineer-In-Charge. (Excavation By Mechanical Means With Excavator Of Bucket Size 0.6M) , Filling Foundation And Plinth With Sand Watered And Rammed As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:4:8) With 4 Cm Size H.G Metal As Per Direction Of Engineer-In-Charge. , Cement Concrete (1:2:4) With 12 Cm Size H.G Chips As Per Direction Of Engineer-In-Charge. , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Foundation Plinth Bend , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Column , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Lintel , Rigid And Smooth Centering And Shuttering For Reinforced Cement Concrete Work Including False Work And Dismentalling Them After Casting Including Cost Of Materials Complete. Roof Slab & Chajja , Reinforced Cement Concrete (1:2:4) With 12 Mm Size Hg Chips As Per Direction Of Engineer-In-Charge. , Supplying, Fitting And Placing Oncoated Hysd (Tiscon) Bar Reinforcement Complete As Per Drawing And Technical Specification Including Cutting, Binding, Bending And Cost Of Binding Wire. , Cost Of Ms Grill For Door, Choukath , Cost Of Iron Shutter, Windows , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Foundation And Plinth. , Fly Ash Brick (25Cmx12cm X8 Cm) Having Crushing Strength Not Less Than 35Kg/Cm With Dimensional Tolerance ± 5% In Cement Mortar (1:6) In Super Structure. , 2.5 Cm Thick A.S Flooring With Cement Concrete (1:2:4) Including Punning As Per Direction Of Engineer-In-Charge. , 12Mm Thick Cement Plaster (1:6 ) Over Brick Masonary As Per Direction Of Engineer-In-Charge. , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge , Filling F & P With Excavated Materials, Moorum Including Watering And Ramming As Directed By The Engineer-In-Charge (For Pipe Laying) , White Washing Three Coats With Shell Time As Per Direction Of Engineer-In-Charge. , Cement Punning Over Cement Plaster As Per Direction Of Engineer-In-Charge. , Painting 2 Coats With Approved Paint On New Work As Per Direction Of Engineer-In-Charge. , Distempering Two Coats To Walls With Distemper Of Approved Shade On New Work To Give An Even Shade After 1 Coat Of White Washing As Per Direction Of Engineer-In-Charge. , 20Mm Thick Cement Plaster 1:4 For Grading Plaster As Per Direction Of Engineer-In-Charge. , Supply, Fitting And Fixing Of Skylight As Per Direction Of Engineer-In-Charge. , Writing Charges Of Required Data On Display Board As Per Direction Of Engineer-In-Charge. , Cost Of Supplying Transportation And Fixing In Proper Place And Position Including Required Size Full Threaded Tvs Nut Bolt With Cement Concrete (1:2:4) As Per Site Condition , Cost Of Outlet , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Cost, Supplying Of Isi Marked High Density Polythelene (Hdpe) Pipes For Water Supply As Per Is 4984/2016 In The Following Nominal Diameter, Grades Of Materials, Pressure Rating As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , 12.5 Hp/9.375 Kw Energy Efficiency Monoblock Pump Set Of Total Head 20 Mtrs Having Discharge 1700 Lpm With Squirrel Cage Induction Motor Fitted With Bronze Impeller Tb-2 Of Is 318/1981, Companion Flanges & Class Finsulation Suitable For Operation 415 Volt +6%-15% 3 Phase, 50Hz Ac Poweer Supply Suction/Deliveery= 100Mmx100mm With Bee 3 Star Rated Energy Efficiency Pump & As Per Is-9079/2002 With Overall Efficiency 62 To 65% Of Reputed Brand Having Wide Dealership Net Work For Easy Availability Of Spares Confirming To Is Specification (A) Casing: Fc 200 As Per Is 210/1978 (B) Impeller: Bronze Grade Ltb-2 Of Is 318/1981 Including All Cost, Conveyance, Cess Etc Complete. , Control Pannel With Automatic Star Delta Starter, Sheet Steel Enclosure Suitable For Operation Of Squirrel Cage Induction Motor Up To 15 Hp With 20 Annual Periodical Maintenance (Ac -3) Duty Contractor At 415 Volt+6%-15%, 3 Phase, 50 Hz Ac Supply With Over Load Relay Range 8.9 To 13.5 Annual Periodical Maintenance & No Volt Coil With Electronic Timer Suitable For Operation At Voltage Range Of 300 To 440 V. The Starter Should Provide Dependable Protection Against Over Load And Single Phasing Fitted With Volt Meter, Ameter, Mcb In Complete Shape Including Indicator Lamp Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Empty Outdoor Irrigation Pannel Board Size (0.45Mtx0.25Mtx1.20M Of 18 Swg Cold Rolled M.S Sheet With 4 Legs Of 300 Size With One Coat Of Red Oxide Primer And Two Coats Of Smoke Grey /Navy Blue Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Mount 3Phase Starter, Main Switch And Capacitor Inside The Panel Board Vertically Over 18 Swg M.S.Sheet And The Danger Board Fixed On The Top Of The Panel Doorreputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , 63 Annual Periodical Maintenance Triple Pole Main Switch Confirming To Is No.4064(Part I & Ii) With Isi Marking Of Reputed Company Having Utilisation Capacity Cagegory Ac- 22 Reputed Brand Of Isi Specification Including All Cost, Conveyance, Cess Etc Complete. , Motor Hood Size (0.45Mx0.45Mx0.60M) Made With 18 Swg (Cold Rolled M.S.Sheet With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Of Approved Quality On Both Side (Inside & Outside) Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Attachement With The Groves On Rear Side Of The Pannel Board Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge , Motor Base Plate Made With M.S Angle With One Coat Of Red Axide Primer And Two Coats Of Powder Coated Paint Suitable To Cover Centrifugal Monoblock Pump Set From 10 Hp To 15 Hp And Having Provision For Hole For Fixing Nut & Bolt Of Approved Brand Including All Cost, Conveyance, Cess Etc Complete As Per The Direction Of The Engineer-In-Charge. , 6 Kvar Power Shunt Capacitor With Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 3X16 Sqmm Pvc Insulated (Hd) Tropoder Armoured Electric Cable With Alluminum Conductor For Use In 3 Phase Power System Of Working Voltage Upto & Including 1100 Volts At 50Hz Confirming To Is 7098 (Pt-Ii) Of Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 4.0 Mm2 Pvc Single Core Copper Wire Isi Mark Of Of Reputed Approved Brand Of Isi Marked Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia Nominal Bore G.I.Pipe Having Wall Thickness 4.5Mm Electrical Resistance Welded Of Medium Class Confirming To Is- 1239(Part-1/2004) With Latest Ammendments, Screwed At Both Ends As Per Is-554 With Socketed At One End And The Other End Protected With Plastic Threaded Protector Including Its Transportation And Unloading At L.I.P. Site. The Socket Confirming To Isi 1239(Part Ii/1992) With Latest Ammendments In Random Length Of 4 To 7 Mtr.Each Pipe Should Bear Is Certification And Manufacturers Name/Trade Mark. (As Per Special Repair 2022) , 100Mm Dia G.I.Bend (Medium Duty) Conforming To Is No-1239 (Part Ii/1992) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I. Screw Boss Foot Valve Of Swing Type Friction Less With Single Disc Conforming To Is-4038/1979 Of Reputed Brand With Isi Mark Of Reputed Company Having Wide Dealership Network Including All Cost, Conveyance, Cess Etc Complete. (Kirloskar Make) , 100Mm Dia G.I.Flange (Medium Duty) Conforming To Is No-6392/1971 With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. , 100Mm Dia C.I.Sluice Valve Flanged Type Pn-1.0 As Per (Is-14846-2000 Standard) With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete. (As Per Special Repair 2022) , 100Mm Dia C.I.Double Flanged Non Return Valve Swing Type Pn-1.0 (Is-5312 (Part-I-2004) With Bypass Arrangement With Isi Mark Of Reputed Brand Including All Cost, Conveyance, Cess Etc Complete (As Per Special Repair 2022) (Kirloskar Make) , Cost, Supplying Of 50Mm Dia Kirloskar Make C.I Double Air Release Valve Pn 1.6 With Saddle And Raiser Pipe Conforming To Is 14845 (Si) With Isi Mark Including All Cost, Conveyance, Cess Etc Complete. , Cost Of 200X200x160mm Dia Hdpe Tee. , Cost Of 160Mm Dia Hdpe End Cap. , Cost Of 200Mm Dia Hdpe End Cap. , Cost Of 100X100x25mm Dia G.I. Tee, Bend, Valve For Priming Set. , 200X100mm G.I. Reducer , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 200 Mm Hdpe Pe-80 Pn 4 , Labour Charge For Laying, Fitting, T&P For Jointing Of Hdpe Pipes Of Specified Materials Grade And Pressure Rating By Butt Fusion Welding Method As Per Specification And Lying In Tranches, Testing Including All Cost Etc Complete As Per Direction Of The Engineer-In-Charge. 160 Mm Hdpe Pe-80 Pn 4 , Labour Charges For Motor, Starter Delivery And Fitting, Fixing Of Suction Including Fitting Of Priming Tee, Tee Set, Nr Valve, Sluice Valve, Air Release Valve And Minor Welding Transportation Of Materials To Site Etc. Including Nut, Bolt Rubber Insallation Etc Complete. , 160X160x160mm Hdpe Equal Tee. , 160X160x110mm G.I. Raisar Tee With Assoceries , Cost Of Butter Fly Valve , Cost Of Rubber Insertion. , Miscellaneous Expenditure If Any Such As Levelling, Cutting And Sloping Of River Bank, Cutting And Levelling Ridges/ Syphone Works Etc , Electrical Works (Part-B) , Construction And Erection Of 11 /0.4 Kv, 25 Kva Double Pole Mounted Substation With 5Mtrx3mtrx1.5Mtr Height G.I. Flat Fencing With Gate, Polymer Insulator, L.T Dist Box With Mccb, Aluminim Bus Bar Of Single Bay With Kitkat Fuse, Sand Filling And Metal Spreading With Ms Grill Gate, All Channel Matrials Should Be G.I, 7 Nos Earthing With Chamber With 3Mtr G.I Pipe Of 40Mm Dia With Connecting Of 50Mm X 6Mm G.I. Flat To All Earthing Including 25Kva Bis Level-Ii Star Rated Transformer Confirming To Re Rules 1956, Mounted On 2.44 Mtr. Long Structure, Supported In 330 Kg 10 Mtr Long Psc Pole, Transformer Hard Channel & Top Channel Made Of 3Mtr Long 100 X 50 X 6 Mm G.I. Channel, Transformer Belting On 3Mtr Long 50Mm X 50Mm X 6 Mm G.I. Angle, (All Rec Spn Std.F-3) With All Accessories Like 3 Pole 11 Kv Hg Fuse (F-5) & A.B. Switches (F-9) Both Mounted On 3Mtr Long 75Mm X 40Mm X 4.8 Mm G.I. Channel And Supported By 1.0 M Long 50 X 50 X 5 Mm G.I. Angle, With 3 No. 11 Kv Lightening Arrestors And Danger Board At Each Pole, Anti Climbing Devices & All Other Necessary Fittings I.E Required Size Nuts & Bolts, Brackets, Cable, Cable Sockets As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Construction Of 3 Phase 11 Kv Ht Line As Per Rec Standard Confirming To Ie Rules 1956 With 330 Kg 10 M Long Psc Pole With 55 Sqmm Aaac Xlpe Covered Conductor Average Span 50Mtr, 11 Kv V Cross Arm Required No. Of 11 Kv T & C Disc. Polymer Insulators In Tension Point & 11 Kv Pin Polymer Insulators, Couping & Padding Of Poles With All G.I.Channels. Danger Board At Each Pole, Anti Climbing Devices, Stay Set At Bending Point & Double Stay At End Point With 18 Mm G.I.H.T. Stay, Concreting Of Stay With Anchor Plate, Guarding At Road Crossings Etc If Required. Including Cost Of All Materials, Labour Transportation, Inspection & Commissioning Etc. Complete As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liaising For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Erection Of 11 Kv Cut Point With 90 Degree Angle Of 3Phase 3 Wire 11 Kv Overheadline On 10 Mtr Long Psc Pole With All Materials Required For The Same As Per Tpcocl Specification Etc. Including Cost Of All Materials, Labour, Transportation Complete With Liasioning For Testing Inspection & Commissioning As Per Specification Of Tpcodl Etc Complete. , Electrical Earthing With 40Mm Dia Medium Duty Gi Earthing Pipe Each 3 M Longwith Installation Including Cost Of All Materials Like Gi Flange Chorcoat, Salf Etc. As Required As Per I.E Rule , Other Electrical Materials Such As Pvc Tape.7/20Pvc Copper Wire 3/20 Pvc Copper Wire G.I Flxible Condite Pipe No 6 Gi Wire Copper Cable Socket Gi Socket And Petty Materials Required For Electrical Installation. All Materials Should Be As Per Is Including Fitting Charges , Cost Of Document Which Includes Pre And Post Photograph (2 Copies) Power Supply Agreement Of Pani Panchayat Office Bearers With Tpcodl Authorities, Handing Over Documents (Agreement) Of Pani Panchayat With Olic Authority Recording Of Latitude And Longitude Etc Complete.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 15
Odisha View Result →
32.
Rural Development #10810858 Price Bid
Tender for Improvement Of Water Supply By Laying New Pipeline, Replacing Of Old Existing Pipeline (Primary, Secondary & All Relevant Distribution Lines), Providing Valves When & Where Requires And Repairing Of Distribution Pipeline Leakage Irrespective Of Dia Of Pipe( Higher Dia Pipe 400 Mm Dia, 600 Mm Dia, 700 Mm Dia, 750 Mm Dia, 900 Mm Dia, 1000 Mm Dia ,1200 Mm Dia, 1575 Mm Dia) , Installation And Repairing Of Air Valve Including Road Restorations Work From The Boundary Wall Of Padmapukur Water Treatment Plant Via Bangal Para 2Nd Bye Lane And Adjoining Areas All Along Drainage Cannel Road, East West Road Upto Crossing Of East West Road & Belilious Road Through Out The Year( Annualy) Under Hmc Area .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
33.
Drinking Water Supply and Sanitation #10788004 Price Bid
TENDER FOR Push Through In Rly Crossing In Rising Main And Gravity Main Providing And Fixing Air Valve Shaft And Ms Pipe Line On Nalla Gaps, Ballarpur 18 Villages Grid Water Supply Scheme Ta Ballarpur Dist Chandrapur=> Open Tender
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Maharashtra View Result →
34.
Housing Urban and Rular Development #10778154 Price Bid
Tender For Construction Of 33/11 Kv Sub-Station In Sector 146, Noida. - S/E of Terminal Gantry Structure of R.S. Joist - 175x85 mm. 19.5 Kg/Mtr. 6.1 Mtr. above the ground and 1:3:6 cement concrete foundation mounted on a stone pad of 300x300x75 mm. with 2 nos channel 175x85 mm suitable for Disc & Pin Insulator Including earth excavation back filling making plinth of required height and with required fabrication as per drawing. complete in all respects as per direction of E/I.(AOR) 2 S/E of 33 KV, 1250A double break Line Isolator with Structure made of 125x65 mm. 13.1 Kg/M Channel at a height of 2.5 Mtr. above ground and 1 Mtr. below ground on a cement concrete pad of 75 mm. thick with 1:3:6 cement concrete foundation including excavation back filling, making plinth of required height & with required fabrication for bracing of M.S. Flat 50x6 mm. 2.4 Kg/m. and top of M.S. Angle 75x75x8 mm., 8.9 Kg/M as per drawing (for structure) Complete in all respects . Make: Jaipuria/Rama/UPPCL approved. as per direction of the E/I. (AOR) 3 Supply, Errection, Testing & Commissioningof 33 KV Outdoor VCB with required str, 1250A, 1500MVA, 25KA, Motorized 750MVA/1250Amp/ with transformer control & relay pannel includingCT, PT with structure. complete in all respectsMake: Crompton/ABB/Schneider as per specification and direction of E/I. (AOR) 4 S/E of Busbar Gantry Structure of 105 Lbs/Yard Rail pole 6.50 M long 5.2 Mtr. above the ground level and 1.30 Mtr. Below in 1:3:6 cement concrete foundation mounted on a stone pad of 300x300x75 mm. With M.S. angle 100x100x8mm (12.1Kg/M) mm suitable for Disc insulator including earth excavation, back filling, making plinth of required height and with required fabrication as per drawing complete in all respects as per direction of E/I.(AOR) 5 S/E of 33 KV, 1250A Bus Isolator with Structure made of 125x65 mm. 13.1 Kg/M Channel at a height of 2.5 Mtr. above ground and 1 Mtr. below ground on a cement concrete pad of 75 mm. Thick with 1:3:6 cement concrete foundation including excavation back filling, making plinth of required height & with required fabrication for bracing of M.S. Flat 50x6 mm. 2.4 Kg/M and top of M.S. Angle 75x75x8 mm., 8.9 Kg/M as per drawing (for structure) Complete in all respects Make: Jaipuria/Rama as per direction of the E/I. (AOR) 6 S/F of 33 KV fuse set out door type of Relco/Rama make complete including structure as per drawing. Complete in all respects.(AOR) 7 S/E of 33 KV Lightning Arrestors with Structure made of M.S. Channel 125x65 mm. 13.1Kg/M top of M.S. Angle 50x50x6 mm. 4.5 Kg/M Lightning Arrestors/Post Insulator are to be mounted on M.S. Plate of 200x150x8 mm. Height of structure is to be 3.5 Mtr. above ground and 1 Mtr. below ground on a 75 mm. thick cement concrete pad with 1:4:8 cement concrete foundation, making plinth of required height including all fabrication as per drawing complete in all respectsMake: Elpro/Oblum/W/Sas per direction of E/I. (AOR) 8 Supply & fixing of 33 KV with 11KV 4 Nos SetB&S type strain Disc insulators 120KN E&M strength. as per drawing complete in all respects Make : Jaishree/BHEL/WS/RR as per direction of E/I.(AOR) 9 Supply & fixing of 33 KV tension fitting suitable for panther conductor and 120KN E&M 11KV disc insulator set of 4 complete in all respects as per direction of E/I. (AOR) 10 Construction of 33 KVtransformer plinth as per drawing. with all material, labour and T&P etc. required for proper completion of the work as per specifications of UPPCLas per direction of E/I.(AOR) 11 Providing and fixing of G.I Chain link fabric fencing of required width size 50x50mm including strenthening with 2mm dia wire or nuts,bolts and washers as required complete as per the direction of the Enginner-in- charge.made of G.I wire of dia 4mm PVC Coated to achive outer dia not less 5mm in required colour and shade.complete in all respect as per ditection of E/I(AOR). 12 Construction of boundary wall in brick work with cement mortar 1:6 (1 Cement : 6 Coarse Sand) for chain link including plaster in cement mortar 1:4 (1 Cement : 4 Coarse Sand) and finishing with water proofing cement paint complete as per attached drawing & complete in all respects as per direction of E/I.(AOR) 13 S/Fixing of 33 KV Post insulator 2x22KV of approved quality and make with all necessary material required for proper fixing including structure made of 125x65mm MS Channel (2.5Mtr above ground of 1 mtr below with ground with grouting 1:3:6 cement concrete including all labour, material, T&P etc. required for proper completion of the work. as per drawing. complete in all respectsMake: Jai shree / BHELas per direction of E/I (AOR) 14 1 nos1250A, VCB of (350MVA) 18.4 KA reputring capacity at 11 KV rated,totally enclosed, air insulated metal card housing floor mounting horizontal isolotion vermin proof fully interlock horizontal draqout type having isolation features and control devices complete with following. (AOR) 15 8 nos single phase double core current transformer 300/5.5/5 Amp epoxy cast resin isulated class of isulation E as per SLD. 16 core 1-15 VAburden class 1.0 for meeting 17 core 1-15 VAburden class 5P10 for protection 18 one no.numerical microprossor based three phase over current (IDMT element )with earth fault relay with instantaeous elements. 19 1 no Anti Pumping device 20 1 no circuit breaker control switch for electrical (T/N/C) 21 1 no limit switch for test & service 22 1 no Ammeter (0-3000Amp & 0-5-Amp) with selector switch (96mm Square. 23 1 no Electronic type digital energy analyser having 30 Days memory and parameters of KW-KWH,Power factor, frequency etcsuitablefor BMS compatible with all accessories. 24 1 no tri vector meter 25 1 set of following indicatinglamps 26 Red,Yellow,& Blue for Phase indication 27 Amber for trip indication 28 Redon Green off 29 Spring charge indication 30 Auto trip indication 31 1 No Hooter with hooter acceptance and reset push button 32 1 No master trip relay (Eletromechanical type) 33 1 set of fuses ferrules wiring etc as required 34 Note: All Spare contact of breakers or any other equipment inside the breaker shall bewired upto the outgoing terminal strip with appropriate terrules/coding . The terminal strip rating shall be suitable for coneccting two wires of 2.5 sqmm subjected to providing minimum size suitable for 4/6 sqmm. (Make- ABB, Crompton, Schnieder, Seimens) 35 11KV H.T Panel describe as above 36 Construction of control cable trench of required size 0.30x0.45 Mtr. bricks class designated-100 work including plastering etc. and covered with R.C.C. Slab (0.50x0.60 M) size complete with all material, labour and T&P etc. required for proper completion of work. complete in all respects. As per direction of E/I.(AOR) 37 S/Filling of 20 mm. stone grit in yard of size26x36mtr75 mm. thick complete in all respects. (AOR) 38 S/F of 6 dia G.I. pipe B class for cable duly duly clamped with support by 1 no. with clamps for 20x3mm MS flat, bolt, nuts and washer required for proper completion of work (UPERC P-47) 39 Supply & laying of earth mat in the switch yard of the Sub-Station for all Electrical Equipments and structure by laying of M.S. Round bar of 32 mm. dia. in 750 mm. deep trenches and earth electrode 3.0 M. long of M.S. round bar 32 mm. dia 0.5 M below ground level. The work include welding/bending/flooring of M.S. round bar and connection all steel structure in switch yard with earth mat by means of M.S. Strip of size 50x6 mm. including all labour, materials, T&P etc. required for proper completion of the work as per details specification of UPPCL Complete in all respects as per direction of E/I. (AOR) 40 Painting of (Complete sub-station) Terminal Gantry, Lighting arrestor, Busbar Gantry, Line Isolator & Bus Isolator Structures, Post insulator, Fencing, Poles and other structure complete with two coats of Al. paint over red oxide. (AOR) 41 S/F of out door type 11KV fuse set Relco/Rama/Rastriya make with insulator Jai shree/BHEL make complete in all respects as per direction of E/I.(AOR) 42 Supply and laying of Control Cable for metering as per direction of E/I. (Gloster/Grandley/Havells/ Polycab/ Diacab make) (AOR) 43 (a) 2.5 Sq. mm. 2 Core Copper 44 (b) 2.5 Sq. mm. 4 Core Copper 45 (c) 2.5 Sq. mm. 10 Core Copper 46 Supply of Top MS Channel 100x50x2240mm as per design complete in all respects UPERC P-48 47 S/E of 125x65 mm. MS Channel (13.10 Kg/M) 1.5 M long fixing in control room for OCB/VCB pannel complete in all respects as per direction of E/I.(AOR) 48 Supply/Fixing of MS ladder of size 5 mtr long and 0.4m width with MS angle 40x40x6mm incl painting etc . complete in all respect as per direction of E/I.(AOR) 49 Supply, Installation, Commissioning & Testing of Battery charger 24V 24V/40Amp float cum Boost battery charger with dropping diodes suitable for I/P 230V±10%, 1 Phase, 50Hz Type FCBC as per PVVNL Specification, maximum continuous output ratings (outpur voltage in float mode 25.80 Volts and in Boost mode upto 33.0 Volts), output current 40A, Plus trickle charging currentof battery floatmode 20A(Max), Boostmode 20A Load terminal, 20A, Battery terminal 20A, Starting rate 10A upto 2.35 V per cell, Finishing rate 10 Aupto 2.75 V Per cell, Output ripple 1% PP at full load and 25.8V DC, output regulation (floatmode) ±1%for ±10% supply voltage fluctuation and ±10% to 100% load variation, Automatic/manual mode of operation, Automatic and manual terminal charging, control configuration 1-phasefull wave controlled, thyristor bridge feed through 1-phase transformer and controlled by constant current/protential controller with load liminting feature and integrated non compartmentalized DCDB with 01 No 60A MCCB incomer, 5 Nos 16AMCB, sheet thickness 2mm, protection as per detail specification enclosed. 50 IS: 13947) IP-42/ maximum Permissible input volage ±10% of 230V AC, Electronic protection with auto reset against short circuit and overload ,DC over voltage short circuit at charger output terminals, thyristor by fuseing with protection against over charging, efficiency of rectified >65% at rated load, Power factor 0.7 lag at D.C. Current 230V Input with ANC cooling typeand Class F type insulation.For Battery : 240V/200AH Tubular type Battery Bank consisting 12 Cells of each 2V/200 AH dry & uncharged along with wooden stand & accessories (AOR) 51 S/Installation, testing & commissioning of out door type 10 MVA with on load tap changer Power Transformer as per ISI specificationincluding loading, unloading, local carriage & erection of the same on existing plinth & making all necessary connection etc. Complete in all respects Make: Crompton/ Alstom/BHEL/ABB/Schneider as per direction of E/I. (E-12) or approved GTP from UPPCL/PVVNL cable termination box with disconnecting facility for 33 KV XLPE cable at 33 KV side.cable termination box with disconnecting facility for 11 KV XLPE cable at 11 KV side.On load tap changer +/- 7.5@ 2.5% Bi directional roller, Conservator with drain valve, Earthing terminals, Double diaphragm explosion vent, Radiator with top & bottom shut off valve, First filling of oil including make up fill, Silica gel breather with oil seal, Rating and diagram plate, Air Release plug, Buchholz relay with shut off valve, Winding temperature indicator (WTI), Oil Temperature indicator (OTI), Megenatic oil level guage, Pressure relief device, Marshalling box .Aproved By CEO. (AOR) 52 S/Laying of Aluminium conductor PVC insulated armoured, served, sheathed cable 1100 V grade at a depth of 75 cm. below ground level over a cushion of 75mm. Below ground level over a cushion of 75mm. thick snad alround and protected with burnt bicks on sides and on top. on surface the cable run shall be fixed on MS clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respected. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. P.S. No. 501 (Gloster/Grandly/Polycab/ Havells/Diacab. make) 53 a) 50 Sq.mm. 3½ Core 54 b) 25 Sq.mm. 3½ Core 55 Supply and fixing of fire extinguisher, ABC Type 4.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work. P.S. No. 1131 56 Supply and fixing of Lugs(socket) forCable P.S. No. 504 57 i) 25 Sq.mm. 58 ii) 50 Sq.mm. 59 iii) 120 Sq.mm. 60 iv) 185 Sq.mm. 61 supply and burying earth electrode for lighting conductor of 600mmx600mmx6.0mm G.I. Plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. Pipe for watering funnel, 30cm square C.I frame with hinged cover masonry housing alternate layrs of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects.P.S. No. 706 62 S/F of brass nickle plated compression gland for PVC isulated & armoured served sheathed, underground cable incl. rubber ring etc. complete in all respects. The armouring of the cable shall be properly connected with the earth as per direction of E/I P.S. No 503 63 (a) Size 25 mmx 3.5 core 64 (b) Size 16 mmx4 core 65 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (A) 66 S/B of 40 mm dia x4.5 meters long GI pipe vertically of earthing having 12 mm dia. Holes spaced 75 mm apart drilled up to 2 meter from the bottom complete with earthing lead of no. 6 to 8 SWG GI wire in GI pipe up to appron) and from appron to switch board (The cost of GI wire and pipe will be extra) upto switch board, 30 cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layes of charcoal / coke and salt at least 150mm thick alround etc. as per directions of engineer-in-charge complete in all respects as per drawing as per PS No. 701 67 Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing ead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing. Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (B) 68 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PS No. 717 69 S/E of overhead line with ACSR(Painther/Dog) Conductor on pole/service bracket including binding etc. complete in all respects PS No 627 70 S/F of fire bucket, round bottom made of GI sheet 9-11 liters capacity duly painted as per fire brigade design, supported on hanging bracket, chained & locked initially filled with fine river sand, water as per direction of E/I. P.S. No. 1133 71 S/F of shock treatment chart (Prescribed under I.E. Rules) duly framed with glass & supported from back with hard board or soft board with supply of all material labour and T&P for proper completion of work. P.S. No. 1134 72 S/L of 1800x900x12 mm. thick chequered rubber matting of testing quality. P.S. No. 1136 73 Painting of the electric pole with 2 Coats of Al. paint over red oxide primer complete in all respects. P.S. No. 634 74 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :Make : Raychem/ Denson/ :DSR 2018 75 120 Sq.mm.I.No. 10.5.2 76 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 33 KV grade as required :Make : Raychem/ Denson. 77 120 Sq.mm. UPERC Pg-27 78 185 Sq.mm UPERC Pg-29 79 Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required.DSR-2018/Item No. 14.13.2 80 80mm dia 14.13.2 81 100mm dia 14.13.3 82 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre DSR Electrical 2018/I.No. 11.3.4 83 Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required. DSR-2018/I.No. 13.23 84 Supply and fixing Clamps, bolts, nuts etc.complete in all respects (DSR-2018/I.No. 2924) 85 Supply of following type high conductivity aluminum strand compacted circular conductor XLPE armoured 11 KV Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment at a depth of 900 mm. below ground level over a cushion of 100 mm. thick sand around and protect with brick on sides and top of cable shall be properly connecting with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. Complete in all respects Make: Gloster/ /Universal/ Polycab/ Havells/ Diacab .as per direction of E/I. 86 i) 185 Sq.mm. 3 Core UPREC 2019 P-41 87 ii) 120 Sq.mm. 3 CoreUPREC 2019 P-41 88 S/F of 11 KV pin 12 long with insulator of Jai Shree/HBHEL on cross arm fixed on HT pole including all T/P etc UPERC P-39 Annexure-16 89 S/F of 11 KV TPMO Relco/Rama make 9 nos insulator of Jai shree/BHEL make complete in all respects as per direction of E/I UPERC P-48 90 S/E Testing & Commissioning of 63 KVA Al. wound outdoor type Transformer as per ISS. Complete in all respects Make : P.M./Kanohar/LD Power/Paramix as per direction of E/I (UPERC 2019) P-51 91 Supply of steel tubular pole 11 mtrs long designated at 410-sp 56 in 1:3:6 cement concrete foundation including excavation back filling etc complete in all respects UPERC P-30 92 BOQ-BSupply of steel tubular pole 11 mtrs long designated at 410-sp 56 in 1:3:6 cement concrete foundation including excavation back filling etc complete in all respects UPERC P-30 93 Supply of Top MS Channel 100x50x2240mm as per design complete in all respects UPERC P-39 94 Supply of required clamp made of MS Nut and bolt etc. as per direction of E/I complete in all respects UPERC P-39 95 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre DSR Electrical 2018/I.No. 11.3.4 96 Supply of 300 sq. mm 3 core high conductivity aluminum strand compacted circular conductor XLPE armoured 33 KV(E) Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment complete in all respectsas per direction of E/I. Make: Gloster/ /Universal/ Polycab/ Havells/ Diacab . (UPERC P-47) 97 S/F of jointing of 300 sq. mm out door type type 33 KV jointing kit heat Shrinkable type for 33 KV Cable including cost of all material, labour, T&P etc. for proper completion Make : Raychem/ Denson. as per direction of E/I. (UPERC P-47) 98 S/F of 6 dia G.I. pipe B class for cable duly duly clamped with support by 1 no. with clamps for 20x3mm MS flat, bolt, nuts and washer required for proper completion of work (UPERC P-47) 99 S/Making of Straight through joint suitable for 300 sqmm x 3 core 33KV armoured cable as per ISS & Complete in all respects Make: Raychem, Denson. As per direction of E/I. (UPERC P-47) 100 S/E of over head line with ACSR Panther Conductor on pole/service braket including binding etc. Complete in all respects as per PS No. 627 101 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000 mm, Outer pipe 50mm, inner pipe 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive and conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I. strip will be extra.) ps 725(A) 102 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50mm, inner Dia 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity one earth lead of 25mm x 3mm G.I. Strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra.) along with 30 cm squrare C.I. frame with hinged cover masonry housing . ps 725 (B) 103 S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects as pe direction of E/I PS No. 504. i) 300 Sqmm 104 Painting of the electric pole with 2 coat of AI paint over red oxide primer complete in all respects As per PS No. 634 105 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules PS No. 1109 106 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PS No. 717 107 S/E of Stay set atleast 3.5 M away the pole Complete with galvan ished 19mmdiax 1.80m long stay rod, 30cmx30cmx6.3mm anchor plate thimble, Stay clamps, Stay insulator, 19mmx600mm stay double screw tightner 7/3.5mm of G.I. Wire etc. 1:3:6 (cement concrete) PS No. 631 108 Numbering of poles with combination of yellow and black colour paint etc complete in all recpects as per direction of E/I (AOR) 109 S/Laying of heavy density poly ethylene pipes ISI marked anti rediant grade OD 160mm dia PN-8 PE 100 (PE 400) grade as per IS code 4984 with excavation at a depth of 1.20 Mtr below ground level i/c the cost of cutting of pipes for making up to length and making joints complete all respects as per direction of E/I. (creator poly extrusion/duraline/rex/times/ naranderplast/pioneer make). (AOR) 110 Providing and laying of200mm dia 6mmthickness through trenchless method including jointing of pipe, excavation of thrust pit and receiving pit of required size with all T & P and the excavation & back filling with compaction complete as per specification for road crossing by H.D.D machine method pipoe will be installed at minumum depth 2M to 3 m below the ground surface or downward as per site condition in required slope.(AOR) 111 S/E of 33 KV, 1250A double break Line Isolator with Structure made of 125x65 mm. 13.1 Kg/M Channel at a height of 2.5 Mtr. above ground and 1 Mtr. below ground on a cement concrete pad of 75 mm. thick with 1:3:6 cement concrete foundation including excavation back filling, making plinth of required height & with required fabrication for bracing of M.S. Flat 50x6 mm. 2.4 Kg/m. and top of M.S. Angle 75x75x8 mm., 8.9 Kg/M as per drawing (for structure) Complete in all respects . Make: Jaipuria/Rama. as per direction of the E/I. (AOR) 112 Laying of One number XLPE power cable of 33KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.(DSR elect 2018 Item.N.8.7.2/P34) Above 120 Sqmm and upto 400 Sqmm 113 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required..(DSR elect 2018 Item.N.7.9/P30) 114 Supplying and erection of 33 KV pin insulator complete with large steel head G.I. pin, nuts, washers etc. as required..(DSR Electrical 2018/Item 13.23 Page 50) 115 Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) kilometre stone as per standard design, including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation,ainting and lettering etc. which shall be paid for separately. 35x111x25 cm size (AOR) 116 Finishing with epoxy paint(two coat or more coats) at all location prepared and applied as per manufacturers specifications incuding appropriate priming coat, preparation of surface etc. Complete on concrete work (AOR) 117 Lettering with black japan paint of approved brand and manufacturer (AOR) 118 Providing and laying in position cement concrete1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) in Foundation of Pump,DG Set etc. Including from work etc. as requriedDSR2018/14.7 P-48 119 Providing and laying in position cement concrete1:3:6 (1 cement : 3 coarse sand (zone-III) :6 graded stone aggregate 40 mm nominal size) in Foundation of Pump,DG Set etc. Including from work etc. as requriedDSR2018/14.9 P-48 120 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.(AOR) 121 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.bituminous portion..(AOR) 122 BOQ-CWiring points for light with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable inPVC conduit with 1.5 FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 14SWG Copper earth continuity wire,GP Box piano type switch and ceiling rose/angle/batten holder3mm thick phenolic laminated backelite sheet etc.Complete in all respects as per direction including mathcing colour wash.P.S. No. 138C 123 Wiring points for Fan/fresh air fan (light duty exhaust fan) with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable inPVC conduit with 1.5 FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 14SWG Copper earth continuity wire,GP Box piano type switch and ceiling rose3mm thick backelite sheet etc.Complete in all respects as per direction including mathcing colour wash.P.S. No. 140C 124 Wiring points for Plug with 1.5 sq. mm. FRLSH PVC insulated multistrand single core copper conductor cable inPVC conduit with 1.5 FRLSH PVC insulated multistrand copper conductor cable as earth wire drawn in side the conduit pipe partly concealed in the wall and partly laid in slab alongwith the reinforcement before concreting complete with 14SWG Copper earth continuity wire, piano type switch and socket etc.Complete in all respects as per direction including mathcing colour wash.P.S. No. 141C 125 Supply and fixing of recess/surface mounting round 24 Watt to 32 Watt LED Down Lighter having Powder coated die cast aluminium housing with extended heat sink, diffuser/ Reflector and driver set completed in all respects. P.S No. 1405 Cat AAA 126 S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve. PS No. 1002 Cat A 127 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000mm, outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified. PS No. 725 (A) 128 Supply and fixing of power plug with 15A / 250 V flush type switch and 5 pin 15 A / 250V flush type socket in suitable M.S. box of 175 mm x 100 mm x 50 mm size with Bakelite sheet cover 3 mm. thick fixed with brass machine screws and cup washer. P.S. No. 1139 129 Supply and wiring of submain with two number 6 sqmm FRLSH PVC insulated 1100V grade multistrand single core copper conductor cable in 25mm dia heavy duty (2mm thick) PVC Conduitl with one number 4 sqmm FRLSH PVC insulated multistrand copper conductor cable as earth continuity wire drawn in conduit. as per PS No. 217 (C) 130 Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 130mm and base plate 12mm thik) having 3mm thikness with single arm bracket (1 Mtr length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. PS No. 641(Make - Bajaj/ Transrail /Volmont/ NERI) 131 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect. P.S. No. 1421 Cat. AAA 132 Supplying and laying of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 Volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. Clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respects. the armouring of the cable shall be properly connected with the earth conductor by clamps etc. (Grandley/Gloster/Havells, Polycab, Diacab. make) P.S 501 133 a. 25 sq. mm 3.5 core 134 b. 35 sq. mm 3.5 core(PS No. 501(k) 135 S/F of sintex type junction box model no. IIGSJB 2817 of size 240x130x110mm with hinges and locking arrangment & MS clamp of 50x6mm flat, complete in all respects including 2 no. G.I pipe 1.5 dia having 1.0 meter length each and chuck nut for cable connection etc. as per direction of E/I. (AOR) 136 Supply and fixing following capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. PS. No. 807 e (ii) 25 A TPN 137 S/F surface/flush mounting 6 ways TPN distribution board without MCB complete in all respects and as directed at site. PS No.1027 Cat A 138 S/F of hexagonal Round GP fan box with hexagonal side of approx. 80mm in lenth fabricated from 16SWG MS Sheet incorporating 10mm dia M S round bar duly duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all materials, labour, T&P etc. for proper completion of work PS No. 1149 139 S/F of fan regulator dimmer 300/400W ISI mark on the existing switch board including making connection T&P etc. for proper completion of work to the satisfaction of Engineer of work. PS No. 1203 140 S/F of Palm or pin type tin plated copper cable socket (lug) to the cable leads, insulating with tap and making connection etc. complete in all respects as per direction of E/I. (PS No. 504 (e)25 sq.mm 141 f) 35 sq. mm 142 S&F of 63 Amp. 4 pole MCB(10 KA) C Curve as per PS No. 1020 (A) Cat-A 143 Supply and fixing of following size heavy duty industrial type Exhaust fan with louvered shuttersof approved make complete with wire guard mesh, mounting sings frame bracket etc. but without regulator suitable for use on 230/240V 50Hz single phase AC supply and conforming to IS: 2312-1967 with update amended (900 RPM) (Havells single phase Model-300mm)300mm dia (AOR) 144 Supply and Fixing of Ceiling fan 1200 mm dia ISI marked Make-Baja, Crompton, Havells or equivalent make.(AOR) 145 BOQ-DS/F of Steel Tubular Pole 11 M long designated 410-SP-56 in 1:3:6 Cement, Concrete graded stone aggregate of 40 mm. Nominal size & foundation including excavation back filling etc. complete in all respects as per direction of UPERC P-54 146 Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 metre and upto 12.00 metre DSR Electrical 2018/I.No. 11.3.4 147 Supply of Top MS Channel 100x50x2240mm as per design complete in all respects UPERC P-39 148 Supply of required clamp made of MS Nut and bolt etc. as per direction of E/I complete in all respects UPERC P-39 149 Supply of following type high conductivity aluminium strand compacted circular conductor XLPE armoured 11 KV Cable neutral earthed system confirming to IS 7098-Part-II (1985) with latest amendment at a depth of 900 mm. below ground level over a cushion of 100 mm. thick sand around and protect with brick on sides and top of cable shall be properly connecting with the earth conductor by clamps etc. with the cost of all material, labour, T&P etc. required for proper completion of the work. (Gloster/Universal/Havells, Polycab, Diacab.make)(UPERC 2019 Pg-28) 150 i) 185 Sq.mm. 3 Core E-48 151 Laying of One number PVC insulated and PVC sheathed/ XLPE power cable of 11KV grade of following size in the existing RCC/ HUME/ METAL/HDPE pipe as required.(DSR elect 2018 Item.N.8.3.2/P31) Above 120 Sqmm and upto 400 Sqmm 152 S/F of jointing of following sizes outdoor/indoor type 11 KV jointing kit heat Shrinkable type for 11 KV Cable including cost of all material, labour, T&P etc. for proper completion of the E/I. (Raychem/Denson Make) uperc Pg-29 153 185 Sq.mm. 154 S/Laying of heavy density poly ethylene pipes ISI marked anti rediant grade OD 160mm dia PN-8 PE-100 grade as per IS code 4984 with excavation at depth of 1.20 Mtr. Below ground level i/c the cost of cutting of pipes for making upto length and making joints complete all respects asper direction of E/I (Crator Poly extrusion/Duraline/Rex/time/narander plast/Poineer make) (AOR) 155 Providing and laying of MS Pipe of 200mm dia 6mmthickness as per IS 3589 grade FE 410 through trenchless method including jointing of pipe, excavation of thrust pit and receiving pit of required size with all T & P and the excavation & back filling with compaction complete as per specification for road crossing by H.D.D machine method pipoe will be installed at minumum depth 2M to 3 m below the ground surface or downward as per site condition in required slope.(AOR) 156 S/Making of Straight through joint suitable for 185 sq.mm x 3 core 11 KV armoured cable as per ISS& complete as per the direction and satisfaction ofE/I(Raychem, Denson.Make) UPERC 2019 Pg-29 157 S/F of 6 dia G.I. pipe B class for cable duly duly clamped with support by 1 no. with clamps for 20x3mm MS flat, bolt, nuts and washer required for proper completion of work (UPERC P-47) 158 Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for two 11 KV over head line conductors complete with 50 mm X 50 mm X 6 mm (angle iron bracket welded to the channel iron and complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required. DSR 2018 13.4 159 S/F of 11 KV pin 12 long with insulator of Jai Shree/BHEL on cross arm fixed on HT pole including all T/P etc UPERC Pg-39 160 S/F of palm or pin type copper tin plated cable socket (lugs) to the cable leads insulating with tape and making connections etc. complete in all respects as pe direction of E/I PS No. 504. i) 185 Sqmm 161 Painting of the electric pole with 2 Coats of Al. paint over red oxide primer complete in all respects. P.S. No. 634 162 Numbering of poles with combination of yellow and black colour paint etc. complete in all respects as per direction of E/I. (AOR) 163 Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules PS No. 1109 164 Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PS No. 717 165 Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required..(DSR elect 2018 Item.N.7.9/P30) 166 S/E of over head line with ACSR Dog Conductor on pole/service braket including binding etc. Complete in all respects as per PS No. 627 167 S/E of Stay set atleast 3.5 M away the pole Complete with galvan ished 19mmdiax 1.80m long stay rod, 30cmx30cmx6.3mm anchor plate thimble, Stay clamps, Stay insulator, 19mmx600mm stay double screw tightner 7/3.5mm of G.I. Wire etc. 1:3:6 (cement concrete) PS No. 631 168 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 2000 mm, Outer pipe 50mm, inner pipe 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive and conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25x3 G.I. strip will be extra.) ps 725(A) 169 Supply and burring of Safe Earthing Electrode T-19 (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50mm, inner Dia 25, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with food mixture of retaining capacity one earth lead of 25mm x 3mm G.I. Strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra.) along with 30 cm squrare C.I. frame with hinged cover masonry housing . ps 725 (B) 170 Providing and laying in position cement concrete1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) in Foundation of Pump,DG Set etc. Including from work etc. as requriedDSR2018/14.7 P-48 171 Providing and laying in position cement concrete1:3:6 (1 cement : 3 coarse sand (zone-III) :6 graded stone aggregate 40 mm nominal size) in Foundation of Pump,DG Set etc. Including from work etc. as requriedDSR2018/14.9 P-48 172 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.(AOR) 173 Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.bituminous portion..(AOR) 174 Finishing with epoxy paint(two coat or more coats) at all location prepared and applied as per manufacturers specifications incuding appropriate priming coat, preparation of surface etc. Complete on concrete work (AOR) 175 Lettering with black japan paint of approved brand and manufacturer (AOR) 176 Providing and fixing precast reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) kilometre stone as per standard design, including finishing smooth in 1:3 cement mortar (1 cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation,ainting and lettering etc. which shall be paid for separately. 35x111x25 cm size (AOR) 177 Operation of 33/11 KV Sub-Station round the clock in 3 shifts of 8 hours each by a team comprising of one electrician, skilled operator (having minimum qualification of ITI (Electrician grade) and one unskilled helper in each shift for operation of S/S equipments including maintenance of 11 KV incoming and outgoing Switchgear panels, 33 KV Switchgear pannels, battery and battery charger, 33/11 KV Transformer with control pannels, HT/LT Cable/Lines along with all associated equipments installed at 33/11 KV Sub-Station compus, (Contractor may deploy required man power, as and when required for attending breakdown within minimum time as detailed in Tech. Specification and distribution code) and maintain the required records as per U.P.P.C.L. (AOR) 178 SUBHEAD-I (Equipments H T Panels Transformers and Main L T Panel, capacitor Panel 11 KV RMU Panel (3 Way RMU) Design manufacture testing at works supply, installation testing & commissioning of 3 panel Board 11KV, Indoor tree standing, floor mounting totally enclosed mela clad VCB insulated comprising of 1 Nos 11KV isolater load break switch and 2 Nos Vaccum circuit breaker as outgoing enclosed in robotically laser weided non-extensible type stainless steel SF6 VCB enclosre with SelfPowered relay (IDMTL O/C +E/F) as HT switchgear including suitable transformer protection relays, metering, indicators push buttons, copper busbars, etc as per the requirement complete as required The fault with stand capacity shall beminimum 20KA for 1 second including four cable entries for two incoming cable and two outgoning cable glands and lugs suitable for 2x 240/185 sqmm XLPE armoure cable (Make- ABB, Crompton, Schnieder, Seimens) 179 Incomer shall be provided with Incomer shall be provided with integral Earthing Switch with making switch Live Cable Indicating LEDs energized thru Capacitive Voltage Deviders Transparent Viewing window for verification of Earthing Right Angle terminal protectors / Boots Electrical & mechanical indications as required Outgoing feeders: Two nos. Vaccum circuit breakers with the following SF-6 insulated 630A Circuit Breaker integral Earthing Switch with making switch Emergency Trip Push Button, Electrical & mechanical indications as required Shunt Trip coil for external trip signal Live Cable Indicating LEDs energized thru Capacitive Voltage Dididers Transparent Viewing window for verification of Earthing Right Angle terminal protectors /Boots IDMT relay for Circuit Breakers self powered, Merlin Gerin type VIP35 or equivalent with required protection CTs of suitable ratio Cable box for incoming and outgoing shall be suitable for icrminating, 11KV, XLPE insulated Aluminium conductor armoured cables One set inbuilt DC power packTransformer protection relays as required as per SLD
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 4
Uttar Pradesh View Result →
35.
Public Administrative Department #10728014 Price Bid
Tender for Improvement Of Footpath From Pragati Maidan To Bantala Crossing In Ward No.-66 To Reduce Road Dust And Improve Air Quality
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 3
West Bengal View Result →
36.
Public Administrative Department #10714170 Price Bid
Civil Work For Auditorium For Nagar Parishad, Dausa, Rajasthan Civil Work For Auditorium For Nagar Parishad, Dausa, Rajasthan EARTH WORKClearing Grass and Removal of Rubbish (Maximum 150mm) by manual means and disposal at a lead of 50 metres as per MoRT&H specification clause 201. 2 Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). In all type of soil. Upto 3.0 m depth. 3 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m. 4 Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.1.1 5 In ordinary rock. Depth upto 1.5 M. 6 Add extra for over all depth of excavation above 1.5 m and upto 3.0 m over item no 4.10.2.1 7 Carriage of Materials by mechanical transport including loading, unloading and stacking ::Upto 1 Km 8 Stone, boulders, gravelly materia 9 Earth filling with available surplus soil excavated from foundations and taken only from outside of building plinth in layers not exceeding 20cm in depth, consolidating each deposited layer including ramming and watering and consolidation with lead up to 50 m and lift upto 1.5 m. 10 Diluting and injection Chloropyrifos Emulsifiable concentrate 20% with 1% concentration for PRE-CONSTRUCTIONAL Anti termite treatment as per IS 6313 part III as amended from time to time and creating a continuous chemical barrier under and around the column pits, wall trenches, basement excavation, top surface of plinth filling, junction of wall and floor along the external perimeter of building expansion joints, over the top surface of consolidated earth of which approach is to be laid surrounding of pipes and conduits etc. complete as per specification (Plinth floor area only shall be measured for payment and excluding the cost of chemical emulsion). 11 Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRT&H specifications with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification including all material, labour, machinery as per clause 710.1.4 of IRC:78 and clause 2200 of MoRT&H specification. 12 CONCRETE WORK 13 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 14 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed by dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. 15 REINFORCED CEMENT CONCRETE 16 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix). 17 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement :1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size) (As per design mix) 18 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-30 Grade Concrete. 19 Reinforced cement concrete work in arches, arch ribs, domes, vaults, shells, folded plate and roofs having slope more than 15° upto two stories excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 20 Providing and laying upto two stories reinforced cement concrete in kerbs, steps and the like excluding the cost of centring, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 21 Add extra for laying reinforced cement concrete above two stories (or 7.50 mtr height above plinth level) for every one storey or 3.00 m height or part thereof. 22 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 23 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 24 Suspended floors, roofs, landings, balconies and access platform. 25 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 26 Columns, Pillars, Piers, Abutments, Posts and Struts.22.1.5 27 Stairs, (excluding landings) except spiral-staircases. 28 Extra for shuttering in circular work (20% of respective centring and shuttering items). 29 Edges of slabs and breaks in floors and walls. Under 20 cm wide. 30 Weather shade, Chajjas, corbels etc., including edges. 31 Add extra for doing centering and shutteriing work for every additional height of 1 metre or part thereof beyond initial 7.5 metre height from plinth level. 32 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. 33 BRICK / STONE MASONERY WORK 34 Brick work with FPS bricks of class designation 75 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand). 35 Brick work with FPS bricks of class designation 75 in superstructure above plinth level upto two stories in all shapes and sizes in Cement mortar 1:4 (1 cement : 4 coarse sand). 36 Half brick masonry with FPS bricks of class designation 75 in superstructure above plinth level upto two stories. Cement mortar 1:3 (1 cement :3 coarse sand). 37 Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry. 38 Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand). 39 Providing and fixing Granite stone slab mirror polished and machine edge cut in walls, pillars, steps, Shelves, Sills Counters, Floors etc. laid on 12mm (Av.) thick base of cement mortar 1:3 (1 cement : 3 coarse sand) jointing with white cement mortar 1:2 (1white cement : 2 marble dust) with pigment to match the shade of the marble slab including grinding, rubbing and polishing complete. Green / Black Above 3601 Cm2 Slabs. 40 Extra for providing edge moulding to 15-18mm thick marble/ Granite stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work. Moulding. 41 Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edges etc. complete 42 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 43 Extra for using Marble printed / Granite shade or dark shade tiles instead of white, grey, ivory, fume red brown, light green, light blue and other light shades in glazed tiles and MAT finished tiles 44 Providing and fixing Motive pieces all coloures for glazed tiles laid over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white mixed with pigment of matching shade complete. Size 200 x 300mm. 45 P & F 1st quality Vitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm. 46 Providing and fixing 1st quality MAT & GLOSSY finished ceramic tiles colour such as standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the the cost of cement mortar bed 1:4) Size 300mm x 450mm. 47 Providing and fixing 1st quality ceramic glazed vitrified tiles of colour standard white, grey, ivory, fume, red brown, light green, light blue, and other light shades with water absorbtion less than or equal to 0.08% confirming to IS : 13753 & IS : 15622 in floor, steps etc laid on bed on neat cement slury finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete. (excluding the the cost of cement plaster on wall and pillar). Size 600mm x 1200mm 48 38mm thick wood block flooring of first class teak wood laid over 25mm thick levelling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth, planed, levelled smooth and finished complete. 49 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 50 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) including pointing with cement mortar 1:2 (1 cement : 2 stone dust) with an admixture of pigment to match the shade of stone. Red sand stone. 51 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 52 ROOFING 53 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75mm deep chase. 54 Providing corrugated G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m². 55 Extra for circular cutting in C.G.S. sheet roofing for making opening of area exceeding 40 square decimetre 0.80 mm thick 56 Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80mm thick with zinc coating not less than 275gm/m² 57 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement : 4 fine/ coarse sand) 58 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 1:4 (1 cement : 4 fine/ coarse sand). 59 Cement plastering including T&P, scaffolding, material and complete labpour, including cost of water, curing, racking of joints etc. with 6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. 60 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 61 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) toplayer 6mm thick with cement mortar 1:4 (1 cement : 4 fine sand). Design on outer plaster. 62 Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. 63 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work. 64 Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). 65 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work. 66 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete 67 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8193, density 16kg/m3 , 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. 68 Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving screws, over expansion joints on vertical surfaces/ceilings with full threaded, cadmium plated steel screws 4mm dia. stem, 30mm long and aluminium washers 2mm thick, 15mm dia. at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete. Powder coated aluminium sheet 2.5mm thick (minimum thickness of powder coating 50 micron). 69 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width. 70 Providing and laying expansion joint complete as per drawing and technical specification and as per clause 2605 of MoRT&H Specification including all material, labour, machinary etc. 71 Fillar joint with 20m thick compressible fibre board. 72 Fillar joint with Joint sealing compound with coarse sand and 6 %bitumen by weight. 73 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: Hot finished seamless type tubes. 74 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded with 15x3 mm lugs 10cm long embedded in cement concrete blocks 15x10x10 cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or with dash fastener or rawl plugs and screws or with fixing clips or with bolts and nuts as require including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. 75 Providing and fixing pressed steel door frames confirming to IS: 4351 manufactured from commercial mild steel sheet of 1.25 mm thickness including hinges jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25mm, or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 76 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer. M.S. tube. 77 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm with 40mm dia, steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. 78 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides including approved ISI marked Stainless Steel butt hinges fittings with necessary screws complete as per annexure A : 30 mm thick Decorative teak veneer both side. 79 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (over all area of door shutter to be measured). Decorative teak veneer both side. 80 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured) Rectangular or square. 81 Extra for cutting rebate in flush door shutters for making double leaf shutter(Total area ofthe shutter to be measured). 82 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete. 50 mm long. 83 Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm dia. 84 Providing and fixing to existing door frames. 30mm thick factory made solid both side Pre-laminated panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded Pre-laminated PVC C channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side Pre-laminated PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the C Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification & drawing (for W.C. and bathroom door shutter). 85 ALUMINIUM WORK 86 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) : For fixed portion. Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). 87 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron). 88 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on unexposed surface, with necessary fixing arrangement and screws etc. complete : 25 mm thick 89 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-incharge . (Cost of aluminium snap beading shall be paid in basicitem) : With float glass panes of 5.50 mm thickness. 90 Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate. 91 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineerin-charge complete. 355 X 19 mm. 92 INTERIOR WORK 93 FALSE CEILING 94 Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 25x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting with 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part I, 95 Sanitary Items 96 Plumbing 97 Providing and fixing Unplasticised P.V.C. connection pipe with PTMT Nuts collar and bush of approved quality and colour. 98 15 mm nominal bore with 3 cm length. 99 15 mm nominal bore with 45 cm length. 100 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long. Weighing not less than 198 gms. 101 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 102 15 mm nominal bore 103 20 mm nominal bore 104 25 mm nominal bore 105 Providing and fixing gun metal non- return valve of approved quality (screwed end) : 106 25 mm nominal bore Horizontal 107 25 mm nominal bore Vertical 108 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 109 Sanitary 110 Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Upto 300 mm dia. 111 Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 112 100 mm dia. pipe 113 125 mm diameter pipe 114 Providing lead caulked joints to spun iron or C.I. pipes and specials including testing of joints but excluding the cost of pig lead : 115 100 mm diameter pipe 116 125 mm diameter pipe 117 Supplying pig lead at site of work. 118 Providing, laying and jointing glazed stoneware pipes grade ‘A’ with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 200 mm diameter 119 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design : 120 Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With bricks with class designation 75 121 Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (heavy duty) 560 mm internal diameter, total weight of cover and frame to be not less than 208 kg (weight of cover 108 kg and weight of frame 100 kg) : With bricks class designation 75 122 Providing and fixing square-mouth S.W. gully trap grade A’ complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design : 100x100 mm size P type With bricks class designation 75. 123 Constructing brick masonry road gully chamber 45x45x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand ) with precast R.C.C. vertical grating complete as per standard design With bricks. 124 Constructing brick masonry road gully chamber 110x50x77.5 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm precast R.C.C. horizontal grating with frame and vertical grating complete as per standard design With bricks 125 Fixtures 126 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. 127 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated levers. 128 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. 129 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 130 Rectangular shape 453x357mm 131 Rectangular shape 1500x450 mm 132 Providing and fixing 100 mm sand cast Iron grating for gully trap 133 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 134 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors 100 mm inlet and 100 mm outlet 135 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore 136 Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements. Weighing not less than 106 gms. 137 Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-incharge and finished smooth. Granite Stone of approved shade 138 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 139 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. 140 Internal work - Exposed on wall 15 mm dia. nominal bore 141 Internal work - Exposed on wall 20 mm dia. nominal bore 142 Internal work - Exposed on wall 25 mm dia. nominal bore 143 Internal work - Exposed on wall 32 mm dia. nominal bore 144 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 15 mm dia. nominal bore 145 Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall. 20 mm dia. nominal bore 146 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work : 147 15 mm dia. nominal bore 148 20 mm dia. nominal bore 149 25 mm dia. nominal bore 150 32 mm dia. nominal bore 151 Painting G.I. pipes and fittings with synthetic enamel white paint over a ready mixed priming coat, both of approved quality for new work : 152 15 mm dia. nominal bore 153 20 mm dia. nominal bore 154 25 mm dia. nominal bore 155 32 mm dia. nominal bore 156 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 157 15 mm dia. nominal bore 158 20 mm dia. nominal bore 159 25 mm dia. nominal bore 160 32 mm dia. nominal bore 161 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 162 15 mm nominal bore 163 20 mm nominal bore 164 25 mm nominal bore 165 WATER HARVESTING SYSTEM 166 Construction of Tube-well upto 100 Meter depth and above in all type of rocks by DTH system and over burden to accommodate casing pipe of following sizes in all types of soils and over burden including lowering of casing pipes but excluding cost of casing pipes as per IS : 2800 (Part I & II) 1979 specifications. The work would be completed after obtaining sand free water. The tube well should have a throughout bore as per nominal dia of casing pipe: 200 mm dia Nominal bore 167 Supply of strainer pipes made of ERW M.S. black pipe ISI mark of following sizes at the site of work including required size of slotting as per IS:8110-1985 of following nominal bore sizes at site of work. 200 mm dia 168 Supply and fixing of M.S. clamp set of 50 ×6mm flat iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. 169 Providing & lowering of G.I. flange pipe B Class including rubber washer and nuts of 8 mm dia complete in all respect. 50 mm dia 170 Development of tube well as per IS specification using suitable compressor to give sand free water for required yield of the gravel packed tube well. 171 ELECTRICAL G-SCHEDULE 172 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI markedMMS ( IS:9537 P - III ) PVC conduit & its accessories, round tiles,18 SWG M.S. box with earth terminal, 6 A switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 173 Short point (up to 3 mtr.) 174 Medium point (up to 6 mtr.) 175 Long point(up to 10 mtr..) 176 Wiring of twin control light / fan / call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked MMS ( IS:9537 P - III ) PVC conduit & its accessories, round tles,18 SWG M.S. box with earth terminal, 6 A two way switch, 3.0 mm thick ISI marked phenolic laminated sheet, zinc plated / brassscrews, cup washers, making connections, testing etc. as required. 177 Short point (up to 3 mtr.) 178 Medium point (up to 6 mtr.) 179 Long point(up to 10 mtr..) 180 Wiring of 3 pin 6 amp. Light plug point with 1.5 sq. mm FR PVC insulated unsheathed 1.1 kV grade flexible copper conductor and 1.5 sq.mm FR PVC insulated unsheathed 1.1 kV grade copper earth conductor (IS:694) of approved make double lock/ ISI marked single lock pvc casing capping & its accessories, 18 SWG M.S. box with earth terminal, screwless cage connectors for neutral looping in switch board & falce ceiling point, 6 A switch, 6 A socket, 3.0 mm thick phenolic laminated sheet, zinc plated / brass screws, cup washers, making connections, testing etc. as required. 181 On board 182 Short point (up to 3 mtr.) 183 Medium point (up to 6 mtr.) 184 Long point(up to 10 mtr..) 185 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required including cutting the wall and making good the same as required. 186 20 mm 187 25 mm 188 32 mm 189 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existing surface or recessed conduit/casing capping including making connections etc. as required. 190 3x 1.5 sq.mm 191 2 x 2.5 sq. mm. + 1x1.5sqmm 192 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 193 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 194 4 x 10.0 sq.mm 195 4 x 16.0 sq.mm 196 Supplying and drawing PVC jacketed with annealed bare copper inner conductor & tinned copper conductor shielding foam PE dielectric coaxial cable of approved make in existingsurface or recessed conduit/casing capping including making connections as required. 197 RG - 6 198 RG -11 199 Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned / annealed copper conductor taped &confirming to ITD specification S/WS-112C &113 C of approved make in existing surface or recessed conduit/casing capping. 200 Unarmoured 2 pair 201 Unarmoured 10 pair 202 Unarmoured 20 pair 203 Unarmoured 50 pair 204 Jelly filled armoured (PIJF) 5 pair 205 Jelly filled armoured (PIJF) 10 pair 206 Jelly filled armoured (PIJF) 20 pair 207 Jelly filled armoured (PIJF) 50 pair 208 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar masking sheet conforming to IS13032 & IS8623 including making internal DB terminations with copper lugs , testing etc. as required. Double door (Three phase) Per phase isolation 209 2+8 Way 210 2+12 Way 211 Providing & Laying XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size. 212 2.5 Sq. mm 4 core 213 4.0 Sq.mm 4 core 214 6.0 Sq.mm 4 core 215 10.0 Sq.mm 4 core 216 16.0 Sq.mm 4 core 217 25.0 Sq.mm 3.5 core 218 35.0 Sq.mm 3.5 core 219 50.0 Sq.mm 3.5 core 220 70.0 Sq,mm 3.5 core 221 95.0 Sq.mm 3.5 core 222 120.0 Sq.mm 3.5 core 223 150.0 Sq.mm 3.5 core 224 240.0 Sq.mm 3.5 core 225 300.0 Sq.mm 3.5 core 226 Supplying and making one end termination with heavy duty single compression brass gland SIBG type, heavy duty aluminium lugs duly crimped with crimping tool, PVC tape etc for following size of Armoured PVC insulated & PVC sheathed/ XLPE aluminium conductor cable of 1100 volt grade as required of size. 227 3.5 x 25.0 sq.mm 228 3.5 x 35.0 sq.mm 229 3.5 x 50.0 sq.mm 230 3.5 x 70.0 sq.mm 231 3.5 x 95.0 sq.mm 232 3.5 x 120.0 sq.mm 233 3.5 x 150.0 sq.mm 234 3.5 x 240.0 sq.mm 235 3.5 x 300.0 sq.mm 236 4 x 2.5 sq.mm 237 4 x 4.0 sq.mm 238 4 x 6.0 sq.mm 239 4 x 10.0 sq.mm 240 4 x 16.0 sq.mm 241 Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. Hot Dipped Galvanized. 242 150mm x 50mm x 1.6mm 243 300mm x 50mm x 1.6mm 244 450mm x 50mm x 2.0mm 245 600mm x 50mm x 2.0mm 246 Maintenance free gel earthing with pipe in pipe /Strip in Pipe technology filled with anti corrosive conductive compound (CPRI tested) below the ground in 150 -200 mm dia earth pit and surrounding filled with required mineral filling compound (MFC should have hygroscopic proper ty to retain the moisture for long time to create low resistance Zone) and C.C. finished chamber covered with hinge type with locking arrangement C.I cover. C.I. frame of size 300mm x300mm complete testing of earth resistance as required of following sizes With pipe in pipe technology (inner pipe dia / outer pipe dia) 80 -100 micron G.I. coating With pipe in pipe technology with 80-100 micron G.I. coating G.I. pipe 3000 mm long , 80/40 mm , terminal 14 mm G.I. strip 247 S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 248 8 SWG copper Wire 249 25mm x 3mm copper strip 250 50mm x 6mm copper strip 251 25mm x 3mm G.I. ( Hot Dipped) Strip 252 25mm x 6mm G.I. ( Hot Dipped) Strip 253 P & F of IP20 LED Recessed/ Surface Mounted Round/ sqaure Non Dimmable Downlight with die-cast aluminum housing & Heat sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. ( supplied together with luminaire) Power consumption of =< 7w/10w/8w/12w/15w/18W with 100/500/750/1100/1250 lumens, system lumen, efficeancy of 70 lm / Watt or 100 lm / Watt output suitable to replace 1x18W/ 2x18w/2x26w CFL downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE Compliance. 254 Recessed mounting LED Downlight 18/20W 255 Surface Mounting LED Downlight 18/20W 256 P & F of IP20 LED Ceiling/ Recessed/ suspended mounting light fixture made form CRCA sheet steel housing, high purity/ transmisivity diffuser for uniform light distrubution.High efficiency driver electronics having efficiency > 85% and in compliance to IEC standards.(integral driver). Power consumption of 40 W/50W/60W, 3000/3300/4200 lumens, system lumen efficiency of 70-80 lm / Watt output suitable for 2x36W FTL/ 2x36w CFL/3x36w CFL light fixtures, life time of 50000 burning Hours with 70% intial Lumens maintained. CCT 3000° K, 4000° K and 6000° K. Fixture shall be CE compliance. Surface Mounting 36W LED Light 2’x2’ with acrylic/ prismatic front cover 257 P & F energy efficient direct fit (Retrofit) LED tube system (with integral driver), on existing fixture. Power Consumption of18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K& 6000°K. 4 LED Tube shape fixture 18W. 258 P/ F IP-65/ IP-66 protected street light luminaries on existing bracket. Fixture made from powder coated single piece pressure die cast aluminum housing with heat dissipation fins on housing with high power LEDs . Diffuser / glass cover for ensuring IP-65 protection for lamp and control gear compartment, system lumen output of 100 lum/watt high power LED. Integrated driver shall be high efficiency having efficiency more than 85 % and in compliance to IEC standards. System life of 50000 burning hours with 70 % of initial lumens maintained. Fixture shall be in CE compliance. IP-65 protected LED street light luminaries LED street light fixture 150 watt 259 Supply and erection of Octagonal pole of following length and dimension as per table-3 with base plate on the cement concrete foundation of M-15 /M-20 grade (1:1.5:3) with the help of anchor bolts of grade 6.8 (IS 1367 P III ). The pole shall be made of S-355JO grade steel sheet , folded lengthwise to obtained Octagonal shape, having single longitudinal seam weld and hot dipped galvanised internally & externally in accordance with IS 2629. The pole shall have a weatherproof flush door and locking arrangements. The complete work shall be supervised and certified by the manufacturers for satisfactory supply, erection, testing and commissioning. 9 Mtr. 260 Supply, Installation, Testing and commissioning of copper wound Transformers 33/0.433 KV, Three Phase, 50 Hz, DYN 11, ONAN type , Standard accessories with off load tap changer (+5% to -10% in steps of 2.5%), winding / Top --- temperature rise of 45°C/40°C first fill oil, having permissible total loss values not exceeding 7.5% of the maximum total loss values for 11 KV as per energy efficiency level - 2 at basic Insulation level conferming to ISS 2026 (Part- I to Part - II), latest ammended and IS 1180 Part-I : 2014. Transformers described as above and as per the following continuous rating. 315KVA 261 Supply, Installation, Testing and Commissiong of indoor type floor mounted metal clad, 11 KV Incomer VCB panel up to 630 A equipped with following switchgears and accessories designed & tested as per latest standard i.e. IEC 62271-200, suitable for STC 25KA/3 and IAC A-FLR for 25kA/1sec. Make of HT Panel, Vaccum Interrupter and VCB should be of same make. 11 KV / 110 Volts PT Class 0.5 accuracy and 100 VA burden with 1No. Voltmeter (0-12 KV), analog type, selector switch for voltmeter and protection fuses/MCB for HT metering upto 12 KV on incomer, Ammeter, analog type, selector switches for ammeters, Microprocessor based numerical relay with O/L, E/F and S/C protection, Set of dual core dual ratio 3CTs of suitable ratio with sec 1 of 15 VA burden and accuracy Class – 0.5 for metering and class 5P10 for protection, Multifunction Meter. 262 SITC of DG Set complete with 1500 RPM Diesel Engine of suitable BHP & AC Brush less SPDP Alternator mounted on a common base Frame & coupled through a flexible coupling or close coupled.Alternator shall be self regulated with standard Alternator Protection( Over voltage, over speed & under voltage). Engine shall have residential silencer, up to 10 M exhaust piping , electronic / Mechanical governor, Manual & electric Start, Batteries, Fuel tank ( with Stand) & piping, control panel (16 G) with MCCB (4P; 25 KA), Ammeter, Voltmeter, Frequency Meter, Energy Meter & Hour Meter, Engine instruments panel, AVM and with Weatherproof, powder coated Accoustic enclosure for DG set for sound attenuation fabricated from 1.6 mm CRCA sheet steel (structure) with side wall fabricated from 1.6 mm CRCA sheet and filled with foam as per CPCB norms latest amendments & IS 8183 .The doors are fabricated from 1.6 mm CRCA sheet packed with accoustic material, floor of MS chequrred plate 5.0 mmthick, All doors/ opening are sealed with neoprene/ EPDN gaskets. The enclosure has built in fuel tank, residential silencer (isolated from main DG chamber) with protection and tripping of DG set against temperature of more than 50 °C. All controls for operation of DG set are from outside the enclosure with DG control panel having microprocessor based genset monitoring and control system mccb Ammeter, voltmeter, Pf meter, frequency meter, KWH meter, Ind. Lamps etc. mounted inside enclosure , visible and accessible from outside. The enclosure should be suitable for following capacity DG sets and alternator. Noise level is less than 75 db (A) at a distance of 1 Mtrs. duly certified by authorized agency. Complete in all respect of following capacity : Radiator cooled and turbo charged 250 KVA at 0.8 pf 415V 50Hz 3-?. 263 Supply, Installation, Testing & Commissioning of HT metering cubical panel as approved By DISCOMs fabricated out of 14 SWG CRCA sheet steel in two compartment & MS angle of size 60mmX6mm having provision for Following: (i) Provision for fixing Trivector Meter (To be supplied by DISCOMs) (ii) Provision for fixing of combined CT PT Set (To be supplied by DISCOMs) (iii)TT Block (iv) 6mm Bakelite sheet on all sides. 264 Supply, Installation, testing and commissioning of 11 KV Double Pole structure With Air Break SWITCH having following specifications : (a) DP : Double pole structure made of two nos. 9 meter long PCC poles (400 Kg) & 7 nos. MS Channel each of size 100 mmx50mmx2500mm complete with earthing of the structure as per REC standards in all respect with nuts, springs washers, clamps as required. (b) GO:Off load type gang operated 3-pole vertical flute type switch suitable for 11KV ; 400A ,3 phase, central post rotating double break isolator complete with MS hardware , copper moving & fixed contact ,assembly of 9 Nos pin insulator ,GI pipe of suitable length for operation.c) DO: 3 Nos. Horizontal/Vertical mounted 33KV Horn Gap fuse set / Drop Out fuse set, 33KV barrel fuses mounted on 6 Nos. Post insulators. (c) DO: 3nos Vertical / Horizontal mounted 11kv horn gap fuse set /drop out 11kv barrel fuses mounted on 6no pin insulators (d) LA:3 piece non linear resistor type. lighting arrestor of approved make suitable for 3 wire, 11kv oh linewith rated voltage of 9kv rms & nominal discharge current rating of 5 ka & complete with galvanized clamping arrangement GI bolts, nuts, washer etc as required. (e) JUMPERS: 3 no 11kv acsr conductors mounted on pin type insularors as required. GENERAL:The go shall be operated by hand operated liver properly earthed with provision for locking mounted at 3’ 265 FIRE ALARM G-SCHEDULE 266 SITC of microprocessor based 2 - wire loop (each loop accessing 90 addressable units ) Fire Alarm Control Panel. The Panel shall be able to give pin point location of addressable units via the address code for each unit. The Panel shall also be able to automatically switch off all control switches when-ever any Alarm is triggered. The Panel shall also be able to give voice announcement to individualized speakers. The Panel shall have built in sounder, Maintenance Free Batteries of minimum 15 Ah of 24 volts capable of minimum of 12 hours with battery charger, rectifier. Loop cards, LCD unit to indicate Fire / Fault Signal of individual unit, built in-built / external printer, to log all incoming data etc complete in all respect. 2-LOOP. 267 SITC Manual Call Point complete with , Glass, hammer and chain etc as required: Analogue addressable type 268 SITC Automatic commendable Control Switches for shutting downAC Plant, Power Supply, Gas Supply etc. Response Indicators. 269 SITC Fault Isolators for isolating shorted, dead wire and loose circuits between two successive Fault Isolators with automatic resetting arrangement. Analogue addressable type. 270 FIRE FIGHTING G-SCHEDULE 271 Sub Head - I - (Wet Riser System - Pumping Equipments)SITC of electric driven Sprinkler / Hydrant pump Suitable for automatic Operation consisting of the following-(A) Horizontal multi stage Centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary sluice value on the suction side ( all items to be matching the suction side of the pump) and pressure gauge sluice value and non return valve on the delivery side side ( all of the necessary dia) and including bypass arrangement for testing of pump.(B) Squirrel cage induction motor suitable for 415 V, 50 HZ, Ac supply of below mentioned HP for the above pump ,1450 RPM T.E.F.C confirming to IP:55 and flexible coupling and coupling guard with the pump. (C) Common bed plate fabricated from mild steel channel or cast iron type1620 LPM at 70 Mtr Head ( 50 HP Motor) 272 SITC of diesel engine drive Standby Pump suitable for automatic operation consisting of the following A, B, C. .The Diesel driven pump shall be suitable for following discharge:(A) Horizontal multi stage centrifugal suction type pump complete for delivery of below mentioned discharge complete with necessary flexible pipe, sluice value on the suction side (all items shall be matching the suction side of the pump) and pressure gauge, sluice valve and non return valve on the delivery side (all of the necessary dia) and including bypass arrangement for testing of pump.(B) Water cooled Diesel Engine developing suitable BHP for the below mentioned discharge at 1800 RPM, flexible coupling and coupling guard with the Pump, common bed plate for mounting of the Engine and Pump, d cushy foot, damping arrangement by cushy foot, Diesel Engine starting Panel for starting of the engine automatically with a unit of battery of 12/24v, 88 Ah, 13/21 plate, Exhaust Pipe of minimum 10 M length, with muffler, day oil tank of 300 1ts capacity with first charge and hand operated oil pumpingset, Supply, installation, testing, & commissioning of electric driven automatic pressurization pump setC) Horizontally mounted single stage centrifugal end delivery pump of below mentioned discharge with necessary sluice valve on the suction side (all items matching the suction side of the pump) and sluice valve, non return value, pressure gauge on the delivery side including by pass arrangement for testing of the working of the pumping set as required.1620 LPM at 70 Mtr Head ( 50 HP Engine) 273 SITC of Jockey pump having Squirrel cage induction motor suitable for 415 V, 50 Hz AC supply with synchronous speed of 2900 RPM T.E.F.C type confirming to IP:55 and flexible coupling and coupling guard with the pump ,Common bed plate of fabricated mild steel channel or cast iron type. 180 LPM at 70 Mtr (15 HP). 274 Supplying & Installing cylindrical type air vessel, 250 mm dia 1.5M high of thickness 6.0 mm M.S. complete with air release valve, safety valve, pressure gauge etc.along with two coats of Red Oxide and two coat of post office red enamel paint as required. 275 Providing & fixing 100mm dia pressure Gauge on Pump DeliveryLine complete with shut off cock. 276 SITC of pressure switches for Main, Jockey, and standby pumps,including necessary wiring UPTO control panel and stop valve. 277 Sub Head - II - (Hydrants System) 278 Providing and fixing single headed hydrant valves with flanged inletISI marked with 63 mm female instantaneous outlet of gun metalcomplete with blank cap and chain conforming to IS : 5290 279 Providing . 63 mm dia 15 M long reinforced rubber hose pipeconforming to IS : 636-1962, Part –A & ISI marked with Gun Metalmale & female coupling wire wound with the pipe. 280 Providing & fixing (1.0 M x .45 M x 0.6 M ) OUTDOOR HOSECABINET suitable for accommodating hydrants made of not lessthan 16 swg. M. S. sheet having central opening glazed doorincluding necessary locking arrangement, painting (one coat primer& two coats of paint ) and housing 2 Nos. RRL hose pipe, 1 Nobranch pipe. 281 Providing and fixing Swinging Drum type hose reel ISI marked 30M(L) x 20 mm (dia) rubber lined pipe with shut off nozzle of 6 mm diaincluding the cost of 25 mm dia pipe connection from riser to hosereel , all sockets, nipples, elbows and 25 mm globe valve. 282 Providing and fixing ISI marked Three Way fire Brigade Inlet to wetRiser with non return valve complete in all respects 283 Providing, fixing, jointing and testing of Heavy Gauge (C class ) MSPipe ISI marked with accessories like tees, elbows, flanged joints,reducers, compressed asbestos gaskets, nuts and bolts includingfixing the pipe with suitable flat iron strip clamps /bracket, paintingetc. Complete as required for delivery/ suction manifold relating tothe pump including painting of two coats of Red Oxide and two coatof post office red enamel paint including all civil breakages andmaking good the same : 284 200mm dia 285 150 mm dia 286 80 mm dia 287 Sub Head - III - (Piping, Valves and Accessories) 288 MS (Medium duty B class) pipe with cleaning,wrapping and coatingof the pipe as per IS; 10221 in all kind of soil at 1.0 M depthincluding excavation as required. 289 150 mm dia 290 100 mm dia 291 80 mm dia 292 Providing & fixing Butterfly valve with Cast Iron Body, Cast Iron Discand Seat of Nitrile Rubber Bonded on Bakelite with hard back to PN1.6 rating with following sizes complete with bolts, washers andcompressed asbestos gasket as required 293 150 mm dia 294 100 mm dia 295 80 mm dia 296 Providing and fixing non return valve complete with bolts nuts washers and compressed asbestos gasket etc as required : 297 200 mm dia 298 150 mm dia 299 80 mm dia 300 Carbon Dioxide type fire extinguisher with cylinder fully charge of 4.5kg capacity. 301 Providing, fixing, testing & commissioning of sprinkler heads of thefollowing type : Pendant type with quartziod bulb, operating temperature at 68 deg Cas per specifications. 302 Providing & fixing 10 SWG chrome plated brass 100 mm diadecorative flanges / escutcheon plates to be fixed at junction ofSprinkler piping with the false ceiling. 303 Sub Head - III - (Piping, Valves and Accessories) 304 Sub Head - IV (Fire Electrical Control Panel) 305 Supplying and making end termination with heavy copper lugs (pin/ring type) duty crimped with crimping tool, PVC tape etc of followingsize 306 1.5 Sq.mm 307 10.0 Sq.mm 308 35.0 Sq.mm 309 Supply, Fabricating & installing following sizes of perforated cable trays including horizontal and vertical bends, reducers tees,cross members and other accessories as required and duly suspended from the ceiling with suspenders and including painting as required. 100mm x 50mm x 1.6mm 310 BOUNDARY WALL G-SCHEDULE 311 Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. Depth upto 1.5 m 312 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. 313 Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). 314 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level : 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size). (As per design mix) 315 Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: M-30 Grade Concrete. 316 Centring and shuttering with plywood or steel sheet upto two stories or height upto 7.5 metre above plinth level including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete. 317 Lintels, beams, plinth beams, girders, bressumers and cantilevers. 318 Reinforcement for R.C.C. work at all levels including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars 319 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Raised and cut pointing. 320 Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. In cement mortar 1:4 (1 cement : 4 coarse sand) 321 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete: 322 EARTH WORK 323 Dressing of earth work in surface excavation including cutting and filling upto 30cm depth including disposal of excavated earth upto 50m and lift upto 1.5 m. 324 Earth work in excavation in open area, STP, WTP, Pumping station with mechanical means including dressing of sides and ramming of bottoms, including getting out the excavated material, disposal of excavated material lead upto 1000m at suitable site as per as per drawing and as per direction of Engineer. (Measurements for payment to be done as per standard drawings). In all type of soil Upto 3.0 m depth. 325 EXTERNAL DEVELOPMENT 326 Compacting original ground 327 Loosening upto a level of 500 mm below the subgrade level watered, graded and compacted in layers by vibratory roller 8-10 tonne to meet requirement of table 300-2 for subgrade construction as per MoRT&H specification clause 305.3.4. 328 Loosening and recompacting original ground below embankment including Loosening leveling and recompacting original ground supporting embankment to facilitate placement of of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling by vibratory roller 8-10 tonne so as to achieve minimum dry density as given in table 300-2 for embankment construction as per MoRT&H specification clause 305.3.4. 329 Providing, laying, spreading (with paver finisher only) and compacting wet mix macadam (WMM) base course comprising of graded stone aggregate and granular material conforming to MORT&H specifications (Table 400-II) in layers of equal compacted thickness each consolidated, including pre-mixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tippers to site, laying in uniform layers in base course on a well prepared sub-base/ base course and compacting with power vibratory-roller to achieve the desired density complete as per MoRT&H specification clause - 406 including all material, labour, machinery, lighting, guarding and maintenance of diversion. 330 CEMENT CONCRETE PAVEMENTS 331 Providing and laying lean cement concrete 1:4:8 in Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid manualy, compacting with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 332 Providing and laying un-reinforced, dowel jointed, plain cement concrete mix With Concrete Mixer & vibrator pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate conforming to IS: 383, maximum size of coarse aggregate not exceeding 25 mm, mixed as per approved mix design, laid, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, admixtures (if required) as approved, curing compound, finishing to lines and grades complete as per drawing and as per clause 602, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. PCC M-30. 333 Providing and laying cast-in-situ cement concrete M-20 grade kerb stone channel top and bottom width 115 and 165 mm respectively, 250mm high laid with kerb laying machine, on 150 mm thick PCC M10 grade foundation (laid manually) as per design, including fixing at site as per clause 408 of MoRT&H Specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. Using Concrete Mixer. 334 Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in approved reflective colour and design having minimun compressive strength of 300 kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-base as defined. Complete job is to be executed as per the instruction of Engineer incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. 335 Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. 336 Providing at site, lowering & laying in trenches, aligning & jointing of RCC pipes NP4 class (with s/s ends) IS: 458 - 2003 (amended up to date) marked and pipes from 300 mm and upto 1800 mm manufactured through vertical casting process at all depths with Rubber gaskets (EPDM/SBR) for sewer lines as per IS: 5382 (including cost of Rubber gaskets, lubricants) as per drawing, sectional hydro testing of the sewer pipe line (including cost and conveyance of water to site for testing) etc., complete as per specification and / or as directed by Engineer. Note : E/w to be measured and paid separately. 300 mm internal diameter. 337 Horticulture Work 338 Grassing with Doobs grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free from weeds and fit for moving including supplying good earth if needed. In rows 7.5 cm apart in either direction. 339 Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 900 mm min. height plants at site in 0.60 m dia holes, 1 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 340 Ficus panda 341 Tecoma capensis ( Ratanjot) 342 Clerodendron inermii ( Choti Aari) 343 Tabernaemontana variegated ( Chandni) 344 Hamelia patens ( Firebush, Thal Kamal) 345 Hibiscus variegated ( Guddal) 346 Supply and planting following in poly bags / earthen pots well branched, well established & free from disease of 300 mm min. height ground covers at site in 0.3 m dia holes, 0.3 m deep dug in the ground, mixing the soil with decayed farm yard/sludge manure, backfilling the hole watering etc as required. 347 Wedelia trilobata ( SunFlower Family) 348 Alternathera green (Parrot Leaf) 349 Iresine herbstii (Blood Leaf) 350 Ophiopogon Black ( Lily Turf, Mondograss) 351 Asparagus myerii (Fox Tail) 352 Lantana sellowiana 353 Rhoeo spathacea Compacta‘ ( Oyster, Boat Lily) 354 Golden duranta 355 Pennisetum setaceum (Fountain Grass)
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
Rajasthan View Result →
37.
Drinking Water Supply and Sanitation #10713558 Price Bid
Different Works Related To Water Supply Scheme At Duna & Its Adjoining Mouzas Water Supply Scheme Within Mayureswar-Ii Block Including Supply Of All Labour & Materials Underbirbhum Division, Phe Dte. ( Sl. No.11 ) - Sinking Of Tubewell- 3 Nos. ( Annexure I ) Site Preparation, Temporary Latrine, Placement & Levelling Of Rig Machine, Mast Hoisting And Casing Drilling ( Upto 6 Mtr. ) Placement Of Casing With All Allied Works Necessary To Commence Drilling Woks And Wind Up Of All Machineries After Completion Of Drilling. 2 Drilling By Direct Rotary Method Of Drilling Using9 7 / 8” Dia.Bit For Pilot Bore Follwed By Subsequently Reaming Using 12 1 / 4” Dia. , 15 Dia. And 17.5 Dia. Rock Roller Bits / Drag Bits In Consolidated, Semi Consolidated And Soft Formation Up To Required Depth Including Casing Boring And Casing Lowering As Required Includingcost Of Fuels And Lubricants Etc. As Required For Drilling.Note:1 ) Rate Only For Pilot Drilling Will Be @ 50%. Of Item Rate.2 ) Ratefor Reaming By 12 1 / 4 Dia. Bit Will Be @ 14% Of Item Rate.3 ) Ratefor Reaming By 15 Dia. Bit Will Be @ 16% Of Item Rate.4 ) Ratefor Reaming By 17.5 Dia. Bit Will Be @ 20% Of Item Rate. From 6 Mtr. To 60 Mtr. 3 From 60 Mtr. To 90 Mtr. 4 From 90 Mtr. To 120 Mtr. 5 From 120 Mtr. To 150 Mtr. 6 From 150 Mtr. To 180 Mtr. 7 Lowering The Tube Well Assembly ( Upvc Casing Pipe , Well Pipe, Strainer Along With Upvc Accessories ) Vertically In A Position With Proper Lowering Arrangement By Applying Necessary Jointing Compound Including Labour Cost For Subsequent Gravel Packing And Machine Operation Cost Etc. 8 Cost Of Consumables For Drilling Rigs And Machineries. 9 Development ( Min. 8 Hr. Continuous ) Of Tube Well By Using Suitable Air Compressor ( Min. Capacity: 600Cfm & Operating Pressure 14 Bar ) Followed By Yield Testing With Bht Pump ( Head :45 To 50Mtr., Discharge :1100 To 1000 Lpm And 25 Bhp Engine ) All Complete Includingto & Fro Transportation Cost And Cost Of Fuels, Lubricants & Labour Etc. 10 Water Sample Collection And Chemical Test Including Arsenic Test. 11 Transportation Cost Of Drilling Equipmentand Accessories Rig Machine Etc. Including Cost Of Fuel, Lubricant & Loading Unloadingthe Materials From Store / Stack Yard / Suppliers Godown And Unloading / Stacking The Same At Site. ( Upto 60.0 Km Distance ) 12 Supply And Delivery Of Upvc Pipe ( Cd ) Conforming To Is 12818:2010. ( Cipet Certified ) . ( 250 Mm Dia. ) 13 Supply And Delivery Of Upvc Pipe ( Cd ) Conforming To Is 12818:2010. ( Cipet Certified ) . ( 150 Mm Dia. ) 14 Supply And Delivery Of Upvcdeep Well Screen ( Rds ) Pipes With Ribs Conforming To Is 12818:2010 . ( Cipet Certified ) 150 Mm Dia. 15 Supply And Delivery Ofupvcreducer 250Mm X 150Mm Dia. 16 Supply And Delivery At Site Of Upvc End Cap. ( 250 Mm Dia. ) 17 Supply And Delivery At Site Of Upvc End Cap. ( 150 Mm Dia. ) 18 Supply And Delivery Of M.S. Housing Clamp 250 Mm Dia. 19 Supply And Delivery Of M.S .Centre Guide ( Special Type ) . 20 Supply And Delivery Of Washed Gravels Size Ranging From 1.80 Mm To 4.74 Mm. Conforming To Is 4097 : 1967. 21 Supply And Delivery Of Bentonite Powder Conforming To Is 6186 : 1986. 22 Electro-Logging Charge. 23 Trial Boring Of Tube-Welldrilling By Reverse Rotary Method Of Drilling Using9 7 / 8” Dia.Bit For Pilot Bore Follwed By Subsequently Reaming Using 12 1 / 4” Dia. , 15 Dia. And 17.5 Dia. Rock Roller Bits / Drag Bits In Consolidated, Semi Consolidated And Soft Formation Up To Required Depth Including Casing Boring And Casing Lowering As Required Includingcost Of Fuels And Lubricants Etc. As Required For Drilling.Note:1 ) Rate Only For Pilot Drilling Will Be @ 50%. Of Item Rate.2 ) Rate For Reaming By 12 1 / 4 Dia. Bit Will Be @ 14% Of Item Rate.3 ) Rate For Reaming By 15 Dia. Bit Will Be @ 16% Of Item Rate.4 ) Rate For Reaming By 17.5 Dia. Bit Will Be @ 20% Of Item Rate.From G.L. To 60 Mtr. 24 From 60 Mtr. To 90 Mtr. 25 From 90 Mtr. To 120 Mtr. 26 From 120 Mtr. To 150 Mtr. 27 From 150 Mtr. To 180 Mtr. 28 Cleaning Compound Premises Of Shrubs, Plants, Jungled Etc. As Per Direction Of E.I.C. 29 Soil Test For Ohr- 1 No. ( Annexure Ii ) Mobilisation Charges Of All Tools & Plants Along With Accessories, Material, Labour, Supervision Etc. At Site Of Work Required In Connection With Boring And Testing Work, Including Setting Up Boring Rigs And Shifting To Different Bore-Hole Points Etc. And Also Including Withdrawal Of Same From The Site After Completion Of Work, Complete As Per Direction Of Engineer-In-Charge. 30 Labour For Making Bore-Holes Of 150Mm To 250Mm Dia. By Any Standard Method To Any Depth Below Ground Level / Bed Level In All Kinds Of Soil Like Clay, Silt, Sand, Stiff Clay, Mixed Soils Etc. Except Rocks ( For The Purpose Of Collecting Disturbed & Un Disturbed Soil Samples, Conducting Standard Penetration Test At Suitable Intervals Etc. ) Including Preparation And Submission Of Bore-Log As Per Irc : 75 And 78 And Clause 2400 Of Specifications For Road & Bridge Works ( 5Th Revision ) , Published By Irc, And Also Including Hire Charges Of Tools And Plants Complete As Per The Direction Of Engineer-In-Charge.A ) When Casing Pipe Is Used To Prevent Collapse Of Bore Hole ( Casing Pipe To Be Finally Withdrawn ) I ) Depth 0 M To 10 M ( For 3 Nos Bore ) 31 Ii ) Depth Greater Than 10 M & Upto 20 M 32 Iii ) Depth Greater Than 20 M & Upto 30 M 33 Field Investigation :I ) Collection Of Undisturbed Soil Sample From The Bore Hole To Be Made By The Concerned Division / Party At Their Cost.A ) 0.00 - 10.0 M 34 B ) 10.00 - 20.0 M 35 C ) 20.00 - 30.0 M 36 Ii ) Collection Of Samples From The Bore Hole ( A ) Disturbed 37 Iii ) Standard Penetration Tests ( S.P.T. ) By Split Spoon Sampler In The Bore Hole As Per Is : 2131.A ) 0.00 - 10.0 M 38 B ) 10.00 - 20.0 M 39 C ) 20.00 - 30.0 M 40 Laboratory Investigation :I ) Liquid Limit As Per Is 2720 ( Part – V ) . 41 Ii ) Plastic Limit As Per Is 2720 ( Part – V ) 42 Iii ) Grain Size Analysis By Sieving As Per Is 2720 ( Part – Iv ) . 43 Iv ) Grain Size Analysis By Hydrometer Method As Per Is 2720 ( Part – Iv ) . 44 V ) Determination Of Water Content As Per Is 2720 ( Part – Ii ) . 45 Vi ) Determination Of Specific Gravity As Per Is 2720 ( Part – Iii ) . 46 Vii ) Direct Shear Test As Per Is 2720 ( Part – Xiii ) . 47 Viii ) Determination Of Unconfined Compressive Strength As Per Is 2720 ( Part-X ) ( I ) Undisturbed 48 Ix ) Determination Of Consolidation Properties As Per Is 2720 ( Part – Xiv ) . 49 X ) Tri-Axial Shear Test :A ) Determination Of Shear Strength Parameters Of A Specimen Tested Inunconsolidated Undrained Tri-Axial Compression Without Measurement Ofpore Water Pressure As Per Is 2720 ( Part –Xi ) . 50 Carriage Of All Disturbed & Undisturbed Samples From Site Of Work To The Divisional Office Or Elsewhere Including Loading And Unloading As Per Direction Of Engineer-In-Charge. Detailed Investigation. 51 Preparation And Submission Of Report In 6 ( Six ) Copies, Giving All Relevant Information Data Like Site Plan, Bore Log And Water Table, Test Results, Calculations, Discussions, Suggestions And Recommendations In Respect Of Suitable Foundation Etc. Including Determination Of Silt Factor Calculation Of Waterways And Complete Design Of Foundation Including Analysis Of Bearing Capacities And Settlements In Bound And Presentable Form Complete As Per Direction Of Engineer-In-Charge.Detailed Investigation. 52 Construction Of 300 Cum Ohr- 1 No. ( Annexure Iii ) Earth Work In Excavation Of Foundation Trenches Or Drains, In All Sorts Of Soil ( Including Mixed Soil But Excluding Laterite Or Sandstone ) Including Removing, Spreading Or Stacking The Spoils Within A Lead Of 75 M. As Directed. The Item Includes Necessary Trimming The Sides Of Trenches, Levelling, Dressing And Ramming The Bottom, Bailing Out Water As Required Complete. A ) Depth Of Excavation Not Exceeding 1500 Mm 53 B ) Depth Of Excavation For Additional Depth Beyond 1500Mm And Upto 3000Mm. ( But Not Requiring Shoring ) . 54 Bailing Out Water From Foundation Trench. This Item Should Be Executed On The Specific Direction Of The Engineer-In-Charges When He Is Satisfied In His Absolute Discretion, That This Has Not Been Necessitated Due To Any Fault On The Part Of The Contractor ) 55 Hire And Labour Charges For Shoring Work ( Including Necessary Close Plank Walling, Framing, Eucalyptus / Jhau Balla Pilling, Strutting Etc ) Complete As Per Directionof The Engineer-In-Charge For Foundation Excavation ( Vertical Surface Are In Contact With Supported Earth Is To Be Measured. ) ( This Item Should Be Executed On Specific Direction Of The Engineer-In-Charge ) .A ) Depth Upto 1.5M. 56 B ) For Additional Depth Beyond 1.5M And Upto 3.00M. 57 Earth Filling In Foundation Trenches Or Plinth With Good Earth In Lyres Not Exceeding 150Mm Including Watering & Ramming Etc Layer By Layer Complete.A ) With Earth Obtained From Excavation Of Foundation. 58 Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm As Directed And Consolidating The Same By Thorough Saturation With Water, Ramming Complete Including The Cost Of Supply Of Sand. ( Payment To Be Made On Measurement Of Finished Quantity ) Do - By Fine Sand 59 Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming And Dressing Bed To Proper Level, And Filling Joints With Powered Earth Or Local Sand. 60 Cement Concrete With Graded Stone Chips ( 20Mm Size ) Excluding Shuttering, In Ground Floor ) Considering 30 Km Distance From Suri Rly. Yard.A ) 1:2:4 Proportion. ( In Foundation And Under Tank At Finished Gl, Plinth Protection Etc. ) 61 Controlled Cement Concrete With Well Graded Stone Chips ( 20Mm Nominal Size ) Excluding Shuttering & Reinforcement With Complete Design Of Concrete As Per I.S.456 And Relevant Special Publications, Submission Of Jobs Mix Formula After Preliminary Mix Design After Testing Of Concrete Cubes As Per Direction Of Eic. Consumption Of Cement Concrete Will Not Be Less Than 300Kg Of Cement With Super Plasticizer Per Cubic Meter Of Controlled Concrete But Actual Consumption Will Be Determined On The Basis Of Preliminary Test And Job Mix Formula. ( Using Concrete Mixture ) .Considering 60 Km Distance From Suri Rly. Yardm- 25 Grade ( With Pakur Variety. ) A ) For Works In Foundation, Basement And Upto Roof Of Ground Floor / Upto 4M. 62 B ) 1St Floor I.E. From Top Of 1St Bracing To Top Of 2Nd Bracing 63 C ) 2Nd Floor I.E. From Top Of 2Nd Bracing To Top Of 3Rd Bracing 64 D ) 3Rd Floor I.E. From Top Of 3Rd Bracing To Top Of 4Th Bracing 65 E ) 4Th Floor I.E. From Top Of 4Th Bracing To Top Of 5Th Bracing 66 F ) 5Th Floor I.E. From Top Of 5Th Bracing To Bottom Of Heal Beam 67 Controlled Cement Concrete With Well Graded Stone Chips ( 20Mm Nominal Size ) Excluding Shuttering & Reinforcement With Complete Design Of Concrete As Per I.S.456 And Relevant Special Publications, Submission Of Jobs Mix Formula After Preliminary Mix Design After Testing Of Concrete Cubes As Per Direction Of Eic. Consumption Of Cement Concrete Will Not Be Less Than 300Kg Of Cement With Super Plasticizer Per Cubic Meter Of Controlled Concrete But Actual Consumption Will Be Determined On The Basis Of Preliminary Test And Job Mix Formula. ( Using Concrete Mixture ) . Considering 60 Km Distance From Suri Rly. Yardm- 30 Grade ( With Pakur Variety. ) A ) Heal Beam And Above ( Cell Wall, Floor, Top & Bottom Ring Beam, Heal Beam ) A ) 6Th Floor 68 B ) 7Th Floor 69 Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4M Using Approved Stout Props And Thick Hard Wood Planks Of Approved Thickness And Required Bracing For Concrete Slabs, Beams, Column Lintel Curved Or Straight Including Fitting, Fixing And Striking Out After Completion Of Woks ( Upto Roof Of Ground Floor ) .Steel Shuttering Or 9 To 12Mm Thick Approved Quality Ply Board Shuttering In Any Concrete Work.C ) For Foundation Upto G.L. 70 Hire And Labour Charges For Shuttering For Concrete Work In Overhead R.C. Reservoir On Separate R.C. Frame Including Fitting, Fixing And Striking Off After Completion Of Work Including Staging Upto 4M Using Ply Board Or Steel Shuttering. ( Not Applicable For Resting On Roof Top ) .A ) G.L. To Top Lantern Of Ohr. 71 Hire And Labour Charges For Staging Beyond 4M With Necessary Cross Bracing And Fixtures And Removing The Same After Completion Of The Work All Complete As Per Direction Of The E.I.C. [ Mode Of Measurement :Area Of Unsupported Horizontal Projection ( Where Staging Beyond 4M Is Practically Un-Avoidable ) X Mean Height Of Staging ] Above Initial 4M. ( Dia 10.50 M. Mean Height 16M. ) 72 Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc. , Initial Straightening And Removal Of Loose Rust ( If Necessary ) , Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Inter-Section, Complete As Per Drawing And Direction. I ) Tor Steel / Mild Steeli. Sail / Tata / Rinl A ) For Works In Foundation Basement Upto Roof Of Ground Floor / Upto 4 M . 73 B ) 1St Floor I.E. From Top Of 1St Bracing To Top Of 2Nd Bracing 74 C ) 2Nd Floor I.E. From Top Of 2Nd Bracing To Top Of 3Rd Bracing 75 D ) 3Rd Floor I.E. From Top Of 3Rd Bracing To Top Of 4Th Bracing 76 E ) 4Th Floor I.E. From Top Of 4Th Bracing To Top Of 5Th Bracing 77 F ) 5Th Floor I.E. From Top Of 5Th Bracing To Top Of Heal Beam 78 G ) 6Th Floor I.E. From Top Of Heal Beam To Top Ofshell Wall 79 H ) 7Th Floori.E. From Top Of Shell Wall To Rest 80 Applying 2 ( Two ) Coats Of Bonding Agent With Synthetic Multi Funtional Rubber Emulsion Having Adhesive And Water Proofing Properties By Making With Water In Proportion ( 1 Bonding Agent : 4 Water : 6 Cement ) As Per ManufacturerS Specification. 81 Extra Rate For Using Water Proofing And Plastering Admixture @ 0.2%By Weight Of Cement ( Or At ManufacturerS Specified Rate For Concrete Of Various Grades ) . 82 Supplying, Fitting, Fixing Fly / Mosquito Proof Nylon Net On Any Type Of Window, Doorshutter Frame With Necessary Fixing Arrangements Complete. 83 Supplying Fitting And Fixing Door Made With Irc Febric Mesh Of 75Mm X50mmx4.5Mmx2.7Mm On 50Mm X 50Mm X 6Mm Angle Iron Frames All Round And One 37.5Mm X 6Mm M.S. Flat Bar Over The Netting All Round Welded To Angle Iron Frame And Providing Locking Arrangements If Necessary And With Two Coats Of Synthetic Enamel Paint ( Other Than Hi-Gloss ) Fitted And Fixed With Clamps Or Haskal Doomney Etc. Complete At The Lantern Of R.C.C. Over Head Reservoir. 84 Artificial Stone In Floor, Dado, Staircase Etc. With Cement Concrete ( 1:2:4 ) With Stone Chips, Laid In Panels As Directed With Topping Made With Ordinary Or White Cement ( As Necessary ) And Marble Dust In Proportion ( 1:2 ) Including Smooth Finishing And Rouding Off Corners And Including Raking Out Joints Or Roughening Of Concrete Surface Andapplication Of Cement Slurry Before Flooring Works, Using Cement @ 1.75 Kg / Sq.M. All Complete Including All Materials And Labour.In Ground Floor 3 Mm Thick Topping ( High ) Polishing, Grinding On This Item Is Not Permitted With Ordinary Cement ) .25 Mm Thick.A ) In G.F For Plinth Protection And Under Tank Floor 85 B ) 6Th Floor 86 C ) 7Th Floor 87 M.S. Structural Works In Columns, Beams Etc. With Simple Rolled Structural Members ( E.G. Joists, Angle, Channel Sections Conforming To Is: 226, Is: 808 & Sp ( 6 ) - 1964 Connected To One Another With Bracket, Gussets, Cleats As Per Design, Direction Of Engineer-In Charge Complete Including Cutting To Requisite Shape And Length, Fabrication With Necessary Bolting, Metal Arc Welding Conforming To Is: 816- 1969 & Is: 1995 Using Electrodes Of Approved Make And Brand Conforming To Is:814- 2004, Haulage, Hoisting And Erection All Complete. The Rate Includes The Cost Of Rolled Steel Section, Consumables Such As Electrodes, Gas And Hire Charge Of All Tools And Plants And Labour Required For The Work Including All Incidental Chages Such As Electricity Charges, Labour Insurance Charges Etc. Payment To Be Made On The Basis Of Calculated Weight Of Structural Members Only In Finished Work As Per Is Specified Weight. Payment For Gusset, Bracket, Cleat, Rivets, Bolts And Nuts May Be Make By Adding The Actual Weight Of Such Items With The Weight Of Finished Structural Members Or 7% Of Weight For Finished Structural Members Weighing Not Less Than 22.5 Kg. / M. Or 15 % Of Weight For Finished Structal Members Weighing Less Than 22.5 Kg. / M. May Be Increased Allow For Bracket, Cleat, Rivet, Bolts And Nuts Etc. And No Seperate Payment Being Made For These Items, As Per Direction Of Engineer In Charge. The Rates Are Considered For A Height Of Erection 8M. / 2Nd Floor Level From The Ground. Add 1.5% Extra Over The Rate For Each Additional Floor Or 4M. Beyond Initiial 8M. Or Part Thereof.Iii ) For Built Up Sections / Srtuctural Members Of Specified Sections Weighing Not Less Than 22.5 Kg. / M 88 M.S. Gate Of Jail Type As Per Approved Design Made Of Strong M.S. Frame Work, Intermediate Stiffeners And Round / Square Bars Or Angles. M.S. Sheet ( Not Less Than 14 Gauge ) Gussets, Cleats Etc. Including Necessary Riveting, Bolting, Welding, Locking And Hanging Arrangements, Fitting And Fixing Complete As Per Direction Of The Engineer-In -Charge. 89 M.S. Or W.I. Ornamental Grill Of Approved Design, Joints Continuously Welded With M.S. Wi Flats And Bats For Winding, Drilling Etc.Fitted & Fixedwith Necessary Screw And Lugs In Ground Floor.A ) Grill Weighing Above 10 Kg / Sqm Upto 16 Kg / Sqm ( In Kg ) 90 Supplying, Fitting, Fixing900 Mm High G.I. Pipe Railing For R.C.C Stair Cat Ladder Walk Way Fabrication, Erection, Welding Of 40 Mm G.I ( Non Tata Medium ) Pipe Place At Top Of Railingand2 Nos 25 Mm Dia. G.I Pipe ( Non Tata Medium ) Placed Equally In Between Railingtop & Floor, Vertical Post Of Raillingare 40 Mm Dia. G.I Pipe ( Non Tata Medium ) Placed At 900 Mm C / C . The Each End Of The Vertical Post Is Join By The 62 Mm ( 25 Mm X 6 Mm X 0.062 M Long ) Ms Flat And 150 Mm Length ( Propes Pipes ) Are Grouted In Concrete Base Of Stair, Walk Way Etc. All Complete With Supplying Of All Materials Including Hoisting Up To The Any Height Complete With 2 Coats Of Painting With Super Gloss ( Hi Gloss ) In Any Shade Except White And Black Over A Coat Of Primer Complete As Per Direction Of E.I.C.Analysis Of Rate Enclosed In Seperate Sheets. ( Analysis Rate ) 91 Supplying At Site Hoisting, Fitting, Fixing Erecting And Building In Position Where Necessary 450Mm.Wide Ladder As Per Design Consisting Of 2Nos. M.S.Plate Of 8Mm.Thick With Necessary Base Plate 60Mm Wide; And 16Mm.Dia M.S.Round Or Square Bar As Steeps Placed @ 300 C / C Including Fabrication, Welding Drilling Etc. As Per Drawing And Direction And Finished With Two Coats Of Synthetic Enamel Painting Over A Coat Of Red Lead Primer Etc. All Complete As Per ;Direction Of The Eic 92 Supplying Fitting And Fixing In Position C.I Manhole / Pit Cover With Rim.A ) Square.I ) 600 X 600Mm ( 50Kg.Approx ) . 93 Brick Work With 1St Class Brick In Cement Morter. ( 1:6 ) In Superstructure Ground Floor ( 1:6 ) 94 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand Cement Mortar Including Rounding Off Or Chambering Corners As Directed And Raking Out Joints Including Throating Nosing And Drip Course Scafolding / Staging Where Necessary ( Ground Floor ) Excluding Cast At Shipping Over Concrete Surface. Ii ) With 1:4 Cement Mortar ( 10 Mm Thick Cement Plaster ) A ) G.L. To Top Of 1St Bracing 95 B ) 1St Floor I.E. From Top Of 1St Bracing To Top Of 2Nd Bracing 96 C ) 2Nd Floor I.E. From Top Of 2Nd Bracing To Top Of 3Rd Bracing 97 D ) 3Rd Floor I.E. From Top Of 3Rd Bracing To Top Of 4Th Bracing 98 E ) 4Th Floor I.E. From Top Of 4Th Bracing To Top Of 5Th Bracing 99 F ) 5Th Floor I.E. From Top Of 5Th Bracing To Bottom Of Heal Beam 100 G ) 6Th Floor I.E.From Bottom Of Heal Beam To Top Of Ring Beam 101 H ) 7Th Floori.E. From Ring Beam To Rest 102 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand Cement Mortar Including Rounding Off Or Chambering Corners As Directed And Raking Out Joints Including Throating Nosing And Drip Course Scafolding / Staging Where Necessary ( Ground Floor ) Excluding Cast At Shipping Over Concrete Surface. Ii ) With 1:3 Cement Mortar ( 10 Mm Thick Cement Plaster ) A ) 6Th Floor 103 B ) 7Th Floor 104 Supplying & Installation Of Lighting Solid Conductor Rod Of Phosphorous-Bronze Size 2M X 12Mm On The Top Dome Of The Rcc Overhead Reservoir, Laying Lightning Conductor Of 65Mm X 8Mm G.I. ( Hot Deep ) Ms Flatruns From The Roof Upto Gl Along The Shell Wall And Colume Fitted With Necessary Rust Proof Clamps, Lying65mm X 8Mm G.I. ( Hot Deep ) Ms Flat Conductorfrom Gl To Bottom Of The Earthing Main Pipe 80Mm Dia. Tata ( M ) Fitted And Fixedand Connecting With The Main Earthing Gi Pipe Of 80Mm.Dia Tata ( M ) Of 2.50M To Be Used As Earthing Electrode Driven Down To At Least 3.0M Below Gl And Filling Up With Charcoal, Construction Of Masonry Chamber Making As Per Direction Of Eic & Necessary Arrangement For Testing The Same As Per Iee Rule. ( All Work To Be Done As Specification Of Pwd ( Elec. ) Schedule. ) 105 Provision For Embossing The Name And Capacity Of The Reservoir With ( 2:1 ) Raised Sand Cement Plaster With Letter Size 30Cm. X 20Cm. On The Outside Of Shell Wall Of The Reservoir Painted Complete As Per Direction Of Eic. 106 Protective And Decorative Acrylic Exterior Emulsion Paint Of Approved Quality, As Per Manufacturer’S Specification And As Per Direction Of Eic To Be Applied Over Acrylic Primer As Required. The Rate Includes Cost Of Material, Labour, Scaffolding And All Incidental Charges But Excluding The Cost Of Primer. ( Two Coats. ) I ) Super Protective 100% Acrylic Emulsion.A ) G.L. To Top Of 1St Bracing 107 B ) From Top Of 1St Bracing To Top Of 2Nd Bracing 108 C ) From Top Of 2Nd Bracing To Top Of 3Rd Bracing 109 D ) From Top Of 3Rd Bracing To Top Of 4Th Bracing 110 E ) From Top Of 4Th Bracing To Top Of 5Th Bracing 111 F ) From Top Of 5Th Bracing To Top Of Heal Beam 112 G ) From Top Of Heal Beam To Top Of 1 / 3Rd Of Shell Wall 113 H ) From 1 / 3Rd Of Shell Wall To Rest 114 Applying Exterior Grade Acrylic Primer Of Approved Quality And Brand On Plastered Or Concrete Surface Old Or New Surface To Received Decorative Textured ( Matt Finish ) Or Smooth Finish Acrylic Exterior Emulsion Paint Including Scraping And Preparing The Surface Thoroughly, Complete As Per Manufacturer’S Specification And As Per Direction Of The Eic. ( Two Coats ) A ) G.L. To Top Of 1St Bracing 115 B ) From Top Of 1St Bracing To Top Of 2Nd Bracing 116 C ) From Top Of 2Nd Bracing To Top Of 3Rd Bracing 117 D ) From Top Of 3Rd Bracing To Top Of 4Th Bracing 118 E ) From Top Of 4Th Bracing To Top Of 5Th Bracing 119 F ) From Top Of 5Th Bracing To Top Of Heal Beam 120 G ) From Top Of Heal Beam To Top Of 1 / 3Rd Of Shell Wall 121 H ) From 1 / 3Rd Of Shell Wall To Rest 122 Neat Cement Punning About 1.5Mm Thick In Wall, Dado, Window, Ceiling, Floor, Drain Etc. 123 Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothing Surface By Sand Pepering Etc. 124 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc Including Using Of A Approved Putty Etc On The Surface If Necessaryon Steel Or Other Metal Surface ( With Other Than Hi Gloss Of Approved Quality ) . I ) 2 Coats ( With Any Shade Except White ) 125 Painting With Ready Mixed Black Japan Of Approved Make And Brand Including Smoothening Surface.Two Coats. 126 Making Arrangement For Showing The Water Tightness Test Of The Rcc Elevated Reservoir By Filling With Water Upto The Maximum Level Of The Tank To The Full Satisfaction Of Eic ( Arrangements Of Water, Its Carriage And Lifting To The Tank Including Necessary Pipes, Fitting, Pumping Machinery Etc. Are To Be Provided By The Contractor With His Own Cost. ( If Water Is Supplied By The Department Rate Shall Be Reduced As Per Prevailing Departmental Rate ) ) 127 Disinfection And Washing The Tank And Pipe Connections Including Cleaning The Inside Of The Etc. Complete. 128 Hoisting, Erection , Placing Connecting With Pipes And Specials Cidf Pipes, Specials ) Securing With Building Specials Providing Stays, Clamps As Required Including Cost Of Staging Platform For The Work Etc.All Complete In All Respects As Per Drawing And Direction Of Eic.A ) 250Mm.Dia . 129 B ) 150Mm.Dia . 130 C ) 100Mm.Dia . 131 Laying Of Cidf / D.I Pipes With Specials, Valves Etc. In Trenches Including Excavation In All Sorts Of Soil, Moorum, Soft Rock And Refilling The Trenches After Laying & Jointing Of Pipes Etc. All Complete As Per Specification And Direction Of Eic.A ) 250Mm.Dia . 132 B ) 150Mm.Dia . 133 C ) 100Mm.Dia . 134 Fitting, Fixing Duct-Foot Bend Including Construction Of Cement Concrete ( 4:2:1 ) Base With Stone Chips Ofapproved Grade & Quality & Including Excavation Of Earth Etc Complete In All Respect. ( Analysis Rate ) A ) 250Mm.Dia ( Base Size 450Mm X 450Mm X 600Mm Deep ) 135 B ) 150Mm.Dia ( Base Size 450Mm X 450Mm X 600Mm Deep ) 136 C ) 100Mm.Dia ( Base Size 450Mm X 450Mm X 600Mm Deep ) 137 Hoisting, Fitting, Fixing Of Ci Bell Mouth With Puddle Collar In Rcc Work As Per Drawing Specification Complete In All Respect.A ) 250Mm.Dia . 138 B ) 150Mm.Dia . 139 C ) 100Mm.Dia . 140 Construction Of Masonry Drain 300 Mm X 250 Mm Inner Section With 1St Class 250 Mm Th. Brick Work In Cement Mortar ( 1:4 ) Over A Layer Of Single Brick Flat Soling , Sand Filling 100Mm Th. And 100 Mm Th. Weak Cement Concrete ( 6:3:1 ) With Graded Stone Ballast Pakur Variety ( 40Mm Size ) Including Earth Work In Excavation, 15Mm Th. Cement Plaster ( 4:1 ) And Neat Cement Punning All Rounding The Drain Etc. All Complete As Per Approved Design , Drawing And Direction Of The Engineer In-Charge. ( Analysis Rate ) 141 Supply And Delivery Of Different Dia.Cidf Pipe ( Class - B ) I.S: 1538 - 1976 & Specials ( Class - B ) As Per Is: 1538 - 1993 With Latest Amendment Including Loading, Unloading & Stacking Properly For Connection Of Inlet, Outlet, Overflow And Washout Line Of Ohr As Per Departmental Drawing With Specified Dia. Inclusive Of All Incidental Charges If Any All Complete As Per Direction Of The E.I.C. ( Test Certificate From The Manufacturer And Guarantee Certificate Should Be Produced By The Agency ) 142 A ) Supply And Delivery Of Cidf Sluice Valve Pn-10 Of Different Dia Make With Cast Iron Double Flanged Non Rising Spindle Sluice Valve Generally Conforing To I:S 14846-2000 With Latest Amended If Any Having Body Door Dome / Bonnet And Cover Of Cast Iron Gr.- F.G. 200 ( Ref. Is-210 ) Spindle Of Is: 6603 Gr.- 12 / Cr. 13 Non-Magnetic, Nut And Seat Rings Are Gunmetal As Per Is: 1538 Part Iv & Vi Valves Are Suitable For Maximum Working Pressure Of 10Kg / Sq.Cm. ( Seat Test ) And Body Tested To 15Kg / Sq.Cm. ( Test Certificate From The Manufacturer As Well As Inspection Certificate From Third Party Inspection, Agency To Be Arranged By Their Own Cost And To Be Approved By E.I.C. ) N.B. The Above Item Should Be Procured From The Reputed Manufacturer Viz- Kalpana, Jupiter & Upadhaya Or Similar Approved Vender List. [ With Cap ] A ) 250Mm.Dia . 143 B ) 150Mm.Dia . 144 C ) 100Mm.Dia . 145 Construction Of R.C.C. Inlet & Overflow Chamber As Per Drawing Cast With Rcc Wallwithcement Concretenot Leaner Than 1:1.5:3 With Graded 20 Mm Down Pakur Variety Stone Chips And Reforcement Having Wall Thickness 125 Mm And Complete With Plastering 15Mm Th. ( 1:4 ) With Neat Cement Finishing And As Per Direction Of The E.I.C. ( Inner Size = 600 Mm X 600 Mm X 750 Mm ) ( Analysis Rate ) 146 Applyingwate Thinable Non-Toxic Acrylic Polymer Modified Paint Coating Or Equivalent Brand Of Approved Quality 2 ( Two ) Finished Coats Over 2 Coats Of Primer Of Same Brand To The Ceiling Of Roof Dome Including Supplying Supplying Requisite Coating Materials Cleaning Of The Substrant Properly To Make It Free From Dirt, Paint, Oil And Grease Sludge, Blisters, Fungus , Moss, And All Other Undesireble Particles Using Wire Brush , Sand Paper Etc. Including Mending Good All Damages All Complete As Per Direction Of The E.I.C. 147 Supplying Hoisting, Fitting Fixing Approved Type Water Level Indicator With Copper Float, Guide Pulley, Wire Boards Etc. As Per Standard Specification And Direction And Satisfaction Of Eic 148 Site Clearence By Removing All Unserviceablematerials, Debris Etc. All Complete As Per Direction Of E.I.C. 149 Construction Of 3 Nos Pump House And Boundary Wall With Land Development ( Annexure Iv ) Earth Work In Excavation Of Foundation Trenches Or Drains, In All Sorts Of Soil ( Including Mixed Soil But Excluding Laterite Or Sandstone ) Including Removing, Spreading Or Stacking The Spoils Within A Lead Of 75 M. As Directed. The Item Includes Necessary Trimming The Sides Of Trenches, Levelling, Dressing And Ramming The Bottom, Bailing Out Water As Required Complete.Depth Of Excavation Not Exceeding 1, 500 Mm. 150 Filling In Foundation Or Plinth By Silver Sand In Layers Not Exceeding 150 Mm. As Directed And Consolidating Same By Thorough Saturation With Water Ramming Complete, Including The Cost Of Supply Of Sand. 151 Single Brick Flat Soling Of Picked Jhama Bricks Including Ramming Anddressing Bed To Proper Level And Filling Joints With Local Sand. 152 Ordinary Cement Concrete ( 1:2:4 ) With Graded Stone Chips ( 20 Mm Size ) Nominal Size Excluding Shuttering And Reinforcement , If Any In Ground Floor As Per Relevant Is Code. ( A ) Pakur Variety 153 Ordinary Cement Concrete ( Mix 1:1.5:3 ) With Graded Stone Chips ( 20 Mm Nominal Size ) Excluding Shuttering And Reinforcement If Any, In Ground Floor As Per Relevant Is Codes. Pakur Variety 154 Earth Work In Filling In Foundation Trenches Or Plinth With Good Earth, In Layers Not Exceeding 150 Mm. Including Watering And Ramming Etc. Layer By Layer Complete. ( Payment To Be Made On The Basis Of Measurement Of Finished Quantity Of Work ) ( A ) With Earth Obtained From Excavation Of Foundation. 155 Reinforcement For Reinforced Concrete Work In All Sorts Of Structures Including Distribution Bars, Stirrups, Binders Etc. , Initial Straightening And Removal Of Loose Rust ( If Necessary ) , Cutting To Requisite Length, Hooking And Bending To Correct Shape, Placing In Proper Position And Binding With 16 Gauge Black Annealed Wire At Every Inter-Section, Complete As Per Drawing And Direction.A ) For Works In Foundation Basement Upto Roof Of Ground Floor / Upto 4 M . I ) Top Steel / Mild Steel [ I. Sail / Tata / Rinl=> Rs.-53241.00 / M; Ii. Other Than Sail / Tata / Rinl=> Rs.-51991.00 / Mt ] 156 Brick Work With 1St Class Brick In Cement Morter. ( 1:6 ) In Foundation And Plinth. 157 Brick Work With 1St Class Brick In Cement Morter. ( 1:6 ) In Superstructure Ground Floor ( 1:6 ) 158 125 Mm Thick Brickwork With 1St Class Bricks In Cement Mortar ( 1:4 ) In Ground Floor 159 Hire And Labour Charges For Shuttering With Centering And Necessary Staging Upto 4 Mtr Using Approved About Props And Thick Hard Wood Planks Of Approved Thickness With Required Bracing For Concrete Slabs , Beams, Columns, Lintels, Curved Or Straight Including Fitting, Fixing & Striking Out After Completion Of Works ( Upto Roof Of Ground Floor ) A ) 25 Mm To 30 Mm Thick Wooden Shuttering As Per Decision & Direction Of Engineer-In-Charge. 160 25 Mm Thick Damp Proof Course With Cement Concrete With Stone Chips ( 3:1.5:1 ) ) ( With Gradedstone Aggregates 10 Mm Normal Size ) And Paintingthe Top Surface With A Coat Of Bitumen Using 1.7 Kg Per Sq M Including Heating The Bitumen And Cost And Carriage Of All Materials Complete. 161 Plaster ( To Wall, Floor, Ceiling Etc ) With Sand & Cement Mortar Includgrounding Off Or Chamfering Corners As Directed A Ramming Out Joints Or Roughening Of Concretesurface By Chamfering Etc. Including Threading Noising And Drip Course Where Necessary. ( Ground Floor ) I ) With 1:6 Cement Mortar.20 Mm Thick Plaster 162 I ) With 1:6 Cement Mortar.15 Mm Thick Plaster 163 I ) With 1:4 Cement Mortar.10 Mm Thick Plaster 164 Supplying Fitting, Fixing- Openable Steel Windows As Per Is Sizes With Side Hung Shutters And Horizotal Glazing Bars With / Without Fixed Type Ventilators. [ The Extra Rate Admissible For The Openable Portion Only ] ( P-82, I-33 ) 165 Supplying 1.5Mm Thick M.S. Sheet Fitted And Fixed On One Or Both Faces Of M.S. / W.I. Gate Etc. With Point Welding At Not More Than150mm Apart Complete In All Respect As Per Design Including Cost Of All Labour And Materials 166 M.S. Or W.I. Ornamental Grill Of Approved Design, Joints Continuously Welded With M.S. Wi Flats And Bats For Winding, Drilling Etc.Fitted & Fixedwith Necessary Screw And Lugs In Ground Floor. ( I ) Grill Weighing Above 10 Kg. / Sq.Mtr And Up To 16 Kg. / Sq. Mtr.Rs.- 8247.00 / Qt, ( Ii ) Grill Weighing Above 16 Kg. / Sq.Mtr And Abovers.-8053.00 / Qt. 167 Applying Decorative Cement Based Paint Of Approved Quality After Preparing The Surface Including Scraping The Same Thoroughly ( Plastered Or Concrete Surface ) As Per ManufactureS Specification In Ground Floor. A ) Two Coats ( On New Cement Plaster Surface ) 168 White Washing Including Cleaning And Smoothening Surfacethoroughly.A ) 3 Coats. 169 B ) Priming One Coat On Steel Or Other Metal Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. 170 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc Including Using Of A Approved Putty Etc On The Surface If Necessaryb ) On Steel Or Other Metal Surface ( With Other Than Hi Gloss Of Approved Quality ) . I ) 2 Coats ( With Any Shade Except White ) ( Hi Gloss ) 171 Number Plaque Of Buildings ( Plaque Size Upto 225 Mm X 225Mm ) Made Of Cement Plaster ( 2:1 ) On Face Of Wall Or Plinth , With 50 Mm Size Letters P.H.E. And The Number Of The Structure Formed Thereon ( In Sunk Type ) Including Painting The Letters Complete As Per Direction. ( Cement = 1 Kg / No ) 172 Supplying, Fitting And Fixing PeetS Valve Fullway Gunmetal Standard Pattern Best Quality Of Approved Brandbearing I.S.I. Marking With Fittings . ( Tested To 21 Kg / Sq.Cm. ) ( For Water Lines Only ) .- 15 Mm. Dia. 173 Construction Of Septic Tank Of Different Capacities As Per Approved Drawing With 1St Class Brick Work In Cement Mortar ( 1:4 ) Including Two 560 Mm Dia. R.C.C. Manhole Cover ( Heavy Type ) Of Approved Make Supplied, Fitted And Fixed In The 100Mm Thick R.C.C ( 1:1.5:3 ) Top Slab With Necessary Fittings, 20Mm Thick Cement Plaster ( 4 : 1 ) With Neat Cement Finish To The Internal Surfaces And 15 Mm Thick Cement Plaster ( 4 : 1 ) To Outside Wall Upto 200 Mm Below G.L Floor Finished With 25 Mm Thick Grey Artificial Stone Over 100 Mm Thick R.C.C ( 1:1.5:3 ) Bottom Slab Including Supplying, Fitting And Fixing All Necessry Specials, Fittings, S.W. Tees, C.I. Foot Rest Etc. Including Excavation Earth In All Sorts Of Soil, Shoring, Bailing Out And Pumping Out Water As Necessary, Ramming, Dressing The Bed And Fefilling The Sides Of The Tanks With Earth, Removing Spoils, Filling Up The Chamber With Clear Water, Removing Foreign Materials From The Chamber And Including Constructing Attached Inspection Pit As Per Approved Drawing And Connecting All Necessary Pipes, Joints Etc. With Internal Plaster Work And Artificial Stone Flooring Is To Be Done With Admixture Of Water Proofing Compound @ 0.5% By Weight Of Cement With All Costs Of Labour And Materials. Note:- ( I ) Finished Level Of Septic Tank Should Be 400 Mm. From Ground Level. ( Ii ) Height Of 50 Mm. Ventilation Pipe &Mosquito Proof Mesh, Should Be Follwed As Per Is:2470, Part I.Payment Will Be Made Separetly On The Basis Of Actual Height Based On Relevant I.S.Code. ( I ) For 10 Usersa ) With Pakur Variety. ( Sail / Tata / Rinl ) 174 Supplying, Fitting & Fixing Orissa Pattern Water Closet In White Glazed Vitreous Chinaware Of Approved Make Supplied , Fitted Fixed In Positioncomplete Excluding P Or S Trap. ( Excluding Cost Of Concrete For Fitting ) I ) 530Mm X 410 Mm 175 Supplying Fitting And Fixing10 Litre Pvc Low-Down Cisternof Conforming To I.S. Specification With Pvc Fitting Complete C.I.Make With Either Side Or Bottom Brackets Including Two Coats Of Painting To Brackets. 176 Supplying Pvc Water Storage Tank Of Approved Quality With Closed Lid ( Black ) -Multilayer. A ) 500 Litre Capacity. 177 Construction Of Circular Soak Well 2.5 Metre Deep In All Types Of Sandy Soils With Dry Brick Work Upto 1.6 Metre From The Bottom Having 150 Mm Intermediate Cement Brick Work ( 1:4 ) Band All Round And Cement Brick Work ( 1:4 ) Upto 0.90 Metre From Top With 20Mm Thick Cement Plastering ( 1:4 ) To Inside Face Upto The Depth Of Cement Brick Work, 15Mm Thick Cement Plaster ( 1:4 ) On Outer Face From Top Of The Well Upto G.L. And 6 Mm Thick Cement Plaster ( 1:4 ) On Top Of The R.C.C. Cover Slab Including Filling Bottom 1.00 Metre Of Inside Of The Well With Brick Metal ( 50 Mm To 63 Mm Size ) Including R.C.C. Cover Slab Of 100 Mm Thick With Cement Conc ( 1:1.5:3 ) With Stone Chips With Necessary Reinforcement And Shuttering Including One 560 Mm Dia. R.C.C. Manhole Cover ( Heavy Type ) Of Approved Make Supplied, Fitted And Fixed In The Cover Slab With Necessary Fittings, Making Nacessary Arrangements For Pipe Connections, Excavation Of Well Including Shoring, Dewatering And Removing The Exess Earth From The Premises As Per Direction Complete In All Respect With All Costs Of Labour And Materials. With 250 Mm Thick Dry Brick Work And 250 Mm Thick Cement Brick Work ( 1:6 ) And 1.00M Inside Dia. ( Sail / Tata / Rinl ) 178 Supplying, Fitting & Fixing Upvc Pipes A-Type And Fittings Conforming To Is:13592-1992 With All Necessary Clamps Nails, Including Making Holes In Walls, Floor Etc. Cutting Trenches In Any Soil Through Masonry Concrete Structures Et. If Necessary And Mending Good Damages Including Joining With Jointing Materials ( Spun Yarn, Valamoid / Bitumen / M-Seal Etc ) Complete. ( A ) 75Mm. Dia. 179 Supplying, Fitting And Fixing Fan Hook For Ceiling With1 Metre Long16mm Dia Rod Complete Including Mending Damages .Payment For Damage And Repair To Be Made Separately. 180 Wash Basin White Vitreous China Of Approved Make ( Without Fittings ) Supplied , Fitted And Fixed In Position On 75Mm X 75Mm X 75Mm Wood Blocks And C.I. Brackets Including Two Coats Of Painting Of C.I. Brackets. ( A ) 450 Mm X 300 Mm Size. 181 Supplying, Fitting And Fixing Approved Brand P.V.C. Connector White Flexible, With Both Ends Coupling With Heavy Brass C.P. Nut, 15 Mm Dia. ( A ) 900 Mm Long. 182 Cutting Holes And Subsequent Mending Good Damages. 183 Supplying , Fitting And Fixing 30 Mm. Thick Both Side Prelaminated Factory Made Solid Panel Pvc Door Shutter Consisting Of Outer Frame Made Out Of Ms Tubes Of 19 Gauge Thickness And Size 19 Mm. X 19 Mm. For Styles, Top And Bottom Rails, Ms Frame Shalll Have Cost Of Steelprimers Of Approved Make And Manufacture, M.S Frame Cover With 5 Mm.Thick Head Moulded Pvc C Channel Of Size 30 Mm. Thick 70Mm. Width Out Of Which 50 Mm. Shall Beflat And 20Mm. Shall Be Tapered In 45 Degree Angle Of Either Side Forming Styles, And 5Mm Thick 95 Mm. Wide Pvc Sheet Out Of Which 75 Mm. Shall Be Flat And 20 Mm. Tapered In 45 Degree On The Inner Side Toform Top & Bottom Rail And 115Mm.Wide Pvc Sheet Out Of Which 75 Mm. Shall Be Flat And 20 Mm. Shall Be Tapered On Both Sides To Form Lock Rail. Top Bottom And Lock Rails Shall Be Provided Either Side Of The Panel With 10Mm. ( 5Mm. X 2 Mm. ) Thick , 20 Mm. Wide Cross Pvc Sheet As Gap Insert For Top Rail And Botttom Rail Sheet To Be Fitted In The M.S Frame Weled / Sealed Tothe Styles &Rails With 7 Mm. ( 5Mm. + 2 Mm. ) Thick X 15 Mm. Wide Pvc Sheet Beading On Inner Side And Joint Together With Solvent Cement Adhesive . An Additional 5 Mm. Thick Pvc Strip Of 20 Mm. Which Is To Be Stuck On The Interior Side Of The C Channel Using Pvc Solvent Adhesive Etc. Com Excluding All Necessary Hardwire As Per Direction Of The E.I.C In Ground Floor. 184 Supplying Fitting Approved Type Ventilator In Position After Cutting Holes In Walls, Setting In Cement Mortar, Mending Damages To Wall And Plaster And Two Coats Of Paint Of Approved Brand Sand Shade .Payment Of Mending Two Damages Of Wall & Plaster And Painting To Be Made Separately.R.C.C. Ventilator Of 20 Mm Thick - Upto 0.10 Sq.M. Area 185 Constructing Inspection Pit Of Inside Measurement 600 Mm X 600 Mm X Upto 600 Mm ( Depth ) With 250 Mm Thick 1St Classbrick Work In Cement Mortar ( 1:4 ) On All Sides , Bottom Of The Pit Consisting Of 100 Mm Thick Cement Concrete ( 1:3:6 ) With Stone Chips Over A Layer Of Jhama Brick Flat Soling, 15 Mm Thick ( 1:4 ) Cement Plaster To Inside Walls And Outside Walls Upto Gl And 20 Mm Thick ( 1:4 ) Plaster To Bottom Of The Pit, Providing Necessary Invert With Cement Concrete ( 1:3:6 ) With Stone Chips As Per Direction, Neat Cement Finishing To Entire Internal Surfaces, Top Of The Pit Covered With 100 Mm Thick Rcc Slab ( 1:1.5:3 ) With Stone Chips And Necessary Reinforcements Upto 1% And Shuttering Including 6 Mm Thick Cement Plaster ( 1:4 ) In All External Surfaces Of The Slab And One 560 Mm Dia Rcc Manhole Cover Of Approved Make Supplied, Fitted And Fixed In The Slab With Necessary Fittings, Necessary Earth Work In Excavation In All Sorts Of Soil, Filling Sides Of The Pit With Earth And Removing Spoils After Work Complete In All Respects With All Costs Of Labour And Materials. -With Pakur Variety. 186 Supplying , Fitting And Fixing Cast Iron P Or S Trap Conforming To I.S. 3989 / 1970 And 1729 / 1964 Including Lead Caulked Joints And Painting Two Coats To The Exposed Surface. ( Painting To Be Paid Seperately ) .- S Trap - 100 Mm. 187 Supplying, Fitting And Fixing Alloy Iron With Brass Spindle Bib Cock / Stop Cock Of Approved Brand And Make, Spray Painted And Tested To 21 Kg Per Sq.Cm. - 15 Mm. Dia. 188 Supplying, Fitting And Fixing Approved Patent Vent Cowl I.C.I. Conforming To I.S.S And Painting Two Coats To The Exposed Surface With Approved Paint Complete. ( Payment Of Painting Will However Be Paid Seperately ) .- 100 Mm Dia. 189 Supplying, Fitting And Fixing Pillar Cock Of Approved Make. A ) I ) Cp Pillar Cock-15 Mm ( Equivalent To Code No-507 & Model - Tropical / Sumthing Special Of Essco Or Similar Brand ) . 190 Earth Work In Filling In Foundation Trenches Or Plinth With Good Earth In Layers Not Exceeding 150 Mm. Including Watering And Ramming Etc. Layer By Layer Complete. A ) With Carried Earth Arranged By The Contractor Within A Radius Of 3 Km. Including Cost Of Carried Earth. 191 Laying For Rising Main & Distribuition System With Fhtc ( Annexure V ) Carrying Ci / Di Pipes With Specials And Valves And Lowering Placing In Position And Laying Carefully Inside The Trenches In Proper Alignment And Gradient Etc.Including Earth Work Inexcavation Of Adequate Width As Per Specification Having Min. Clear Cover From Top Of Pipe Is 1.10Mtr. Below Existing Ground Level In Any Kind Of Soil Including Mixed With Boulder, Road Sub-Grade And Its Flank, But Excluding Moorum And Laterite And Stone Etc.Without Damaging The Exisiting Telephone / Electric Cableetc. ( Incaseof Damaged If Any Type Of Cable Line During Excecution , Necessary Damaged Charges As Applicable By The Respective Authority Will Beborne By The Agency In His Own Cost ) Preparing The Bottom Surface For Continuous Bedding Of Pipe Line And Laying Pipes, Fitting, Fixing Specials And Valves With Bailing Out Water If Any Including Carriage Of Pipes, Specials And Valves From Local Deptt.Store Within 8Km And Back Filling The Trenches With Excavated Earth In Layers To Original Condition As Per Specification And Direction Of Eic. The Surplus Materials After Execution Of Work Are To Be Return To The Deptt. Store.N.B: I ) Any Deviation From Required Clear Cover Of 1.10Mtr., Due To Site Adverse Condition, Prior Permission Is To Be Obtained From The Eic In Exceptional Situation And Payment Will Be Made On Prorate Basis Over The Rate Of Entire Item Ii ) No Payment Will Be Made Without Hydraulic Test Of The Pipe Line Either Part Or Full Iii ) Thepipes, Specials And Valves , Rubber Gasket Will Be Supplied Deptt. Free Of Cost.A ) 150Mm Dia. 192 B ) 200Mm Dia. 193 C ) 250Mm Dia 194 Making Rubber Gasket Joint To Ci / Di Pipes Maintaining Proper Alignment Level Etc. By Mechanical Arrangement With Or Without Using Mobile Cranes Where Necessary And With Help Of All Other Equipments Tools And Tackles Etc. As Required Providing Lubricants Of Approved Quality And Direction Of Eic. ( Rubber Gasket Will Be Supplied Deptt. Free Of Cost ) B ) 150Mm Dia. 195 C ) 200Mm Dia. 196 D ) 250Mm Dia 197 Making Flange Joint To Di / Ci Pipes, Specials And Valves Where Necessary With Supply Of Required Rubber Insertion And Nut Bolts, Washers Etc. Of Approved Quality And Type All Complete As Per Specification And Direction Of Eic ( Nut And Bolts Shall Be Of Tata / Gkw Rate ) .A ) 250Mm Dia 198 B ) 200Mm Dia. 199 C ) 150Mm Dia. 200 E ) 100Mm.Dia . 201 Cutting Di Pipe ( All Class & Type ) To Required Length With Cutting Device Etc. And Grinding The Cutting Portion With File As Per Direction And Satisfaction Of Eic.B ) 150Mm.Dia.To 200Mm.Dia Pipe 202 C ) 250Mm.Dia.To 350 Mm.Dia Pipe 203 Chamfering The Spigot End Of All Type / Class Of Di Pipe For Proper Using Of Push Joint By Means Of Grinder Set At Site For Proper Joint Etc. All Complete As Per Direction Of Eic.B ) 150Mm Dia. 204 C ) 200Mm Dia. 205 D ) 250Mm Dia 206 Filling The Pipe Line With Water, Testing Hydraulically As Per I.S 3114-1965 ( Article-6 ) In Section Of A Length Not Exceeding 500Mtr. For Head Of Pressure As Per Specification Including Supplying Installing And Fixing All Equipments Such As Diesel Pump Set, Blank Flange, Pressure Gauge, Valve, Pressure Pump And All Other Tools And Plants Including Drilling Topping And Plugging Of Necessary Holes To Pipes, Blocking Ends Providing Temporary Thrust Block And Subsequent Blocking Of Holes And Other Jointing Materials And Dismantling And Removal Of The Same Including Disposal Of Water Etc. All Complete As Per Specification And Direction Of Eic. The Rate Is Inclusive Of Cost Of Requisite Water To Be Arranged By The Contractor ( Recovery Rate Of Water @ Rs.10.00 / M3, If Contractor Used Water From Deptt. Source ) .A ) For Ci / Di Pipe.A ) 150Mm Dia. 207 B ) 200Mm Dia. 208 C ) 250Mm Dia 209 B ) For Upvc / Hdpe Pipea ) 50Mm ( Od ) 210 B ) 63Mm ( Od ) 211 C ) 75Mm ( Od ) 212 D ) 90Mm ( Od ) 213 E ) 110Mm ( Od ) 214 F ) 125Mm ( Od ) 215 G ) 140Mm ( Od ) 216 H ) 160Mm ( Od ) 217 I ) 180Mm ( Od ) 218 J ) 200Mm ( Od ) 219 K ) 225Mm ( Od ) 220 Cleaning Thoroughly The Inner Surface Of Pipe Line Including Specials And Valves By Flushing With Water And Subsequently Disinfection Of The Same Pipe Line By Flushing Again With Water Containing Bleaching Powder Resulting In Residual Chlorine Not Less Than 15Mg / Ltrs. After 24Hrs. Of Such Filling Including Laboratory Testing Of Water Samples Obtain From The Disinfested Pipe Line And Disposal Of Water From The Pipe Line After Completion Of The Work. The Rates Including Of Cost Of Requisite Water To Be Arranged By The Contractor ) ( The Rate Of Water @Rs. 10 / M3 May Be Recovered, If The Contractor Used Water From Deptt. Source ) .A ) For Ci / Di Pipe.B ) 150Mm Dia. 221 C ) 200Mm Dia. 222 D ) 250Mm Dia. 223 B ) For Upvc / Hdpe Pipea ) 50Mm ( Od ) 224 B ) 63Mm ( Od ) 225 C ) 75Mm ( Od ) 226 D ) 90Mm ( Od ) 227 E ) 110Mm ( Od ) 228 F ) 125Mm ( Od ) 229 G ) 140Mm ( Od ) 230 H ) 160Mm ( Od ) 231 I ) 180Mm ( Od ) 232 J ) 200Mm ( Od ) 233 K ) 225Mm ( Od ) 234 Submission Of Complete Detailed Drawing Of Distribution System, Rising Main Etc. After Execution Of Work Showing Position Of Different Types Of Valves, Fittings / Specials Sluice Valve Chamber With Location, Node To Node Wise In The Sanctioned Drawing As Completion Drawing Of The Water Supply Scheme As Per Direction And Satisfaction Of Eic. The List Of Dia Wise Fitting / Specials, Different Pipes ;Of Valve Used In The Rising Main Should Be Shown In The Completion Drawing ( Not Separate ) With Verified By Sae & Ae In-Charge Of The Scheme. The Above Drawing Will Be Submitted In 5 Copies. 235 Bituminous Pucca Road ( Approx. 450Mm Depth ) Cutting By Using Gaiti, Chisel, Hammer Etc. And Picking Uip The Withdrawing Excavated Materials And Remove The Same Within Distance Of 30Mtr. At Least All Complete For Fixing / Crossing All Dia Of Pipe Line As Per Direction Of Eic 236 Dismantling All Type Of Plain Cement Concrete Works, Stacking Serviceable Materials Of Site And Removing Rubbish As Directed Within A Lead Of 75Mtr. For Laying All Dia Pipe Line In Ground Floor, Upto 150Mm Thick.A ) Upto 150Mm Thick 237 B ) Above 150Mm Thick 238 Construction Of Different Dia Sluice Valve / Air Valve / Washout Chamber In Different Sizes For Village Road Where Light Traffic Run And For Main Road Where Heavy Traffic Run As Deptt.Approved Drawing With 25Cm Thick Brick Work ( 1:6 ) Over Cement Concrete ( 4:2:1 ) Over A Single B / F Soling Over150mm.Thick Sand Filling In Foundation Including Earth Work In Excavation And Disposal Of Excess Earth From Work Site With Rcc ( 1:1.5:3 ) Cover Slab 100Mm / 150Mm Thick Slab On Top Of Chamber With 1% Reinforcement Inrcc Cover Slab With Necessary Opening For Operation Of Valve All Complete Including Cost Of Labour & Materials As Per Departmental Dwg. [ Reinforcement Type:- Other Manufactuerers Not Specified ] I ) 80 Mm To 150 Mm Dia Pipe 239 Ii ) 200 Mm Dia Pipe 240 Iii ) 250 Mm Dia To 350Mm Dia Pipe 241 Making Holes In Two Sides Of Wall Of Culvert / Drain Or Any Other Structuresin Any Places For Laying Any Dia Pipe Line Within Structures Intwo Sides Of Wall Of Culvert / Drain / Any Structure At Any Places And Mending Good Damages All Complete As Per Direction Of Eic. 242 A ) Construction Of Rcc Street Stand Post ( 700Mm Height ) Of Rcc ( 1:1.5:3 ) Footing Over 75Mm Thick 4:2:1 P.C.C Over A Single B / F Soling With 1% Reinforcement, Connected With Saddlepiece & 15Mm Dia Brass Ferrule With Supplying Fitting, Fixing 15Mm Dia G.I. Nipple, G.I.Socket, G.I. 200Mm X 150Mm Reducing Elbow And 20Mm Dia Gi ( M ) Tata Pipe Of ( Avg. ) 2.6Mtr. Long And One 15Mm Dia Alloy Iron With Brass Spindle Bib Cock With Socket And 20Mm G.I. Elbow 2Nos. With 15Mm Gi ( M ) Tata Pipe Of 0.225Mtr. For Connection Of Stand Post To Distribution Line As Per Deptt. Design And Drawing As Per Direction Of Eic Along With Construction Of Platform Of Size Cc Platform ( 1:2:4 ) Over A Single B / F Soling Below G.L Over 150Mm.Thick Sand Filling, Neat Cement Finish Over Platform And Inner Side Of Band And 15Mm Thick Cement Plaster ( 4:1 ) On Top Of Platform Band And Outside Upto G.L. As Per Deptt. Drawing And As Per Direction Of Eic 243 Supplying Hdpe ( Materials Grade Pe-80 ) Pipes Conforming To Is 4984-1995 With Latest Revision & Amendments If Any With Necessary Hdpe Specials ( Excluding Cost Of Cidf Valves ) Including Labour Charges For Earth Work In Excavation In Any Kind Of Soil Including Mixed Soil With Boulder, Road Sub-Grade And Aits Flank But Excluding Moorum Laterite Or Sand Stone / Hard Rock Cutting With Chisel Required Including Cutting Road Flank / Brick Pavement Etc. Without Damaging The Exisiting Telephone / Electrical Cable Line Etc. ( In Case Of Damage Of Any Type Of Cable Line By The Agency At The Time Of Execution Necessary Damage Charge As Applicable By The Respective Authority Will Have To Be Brone By The Agency At His Own Cost ) Upto The Depth ( Av. ) So As To Maintain 1.10M.Earth Cushion From Top Of The Pipe Upto G.L. Including Loading Unloading Carrying Lowering Laying Fitting Fixing Carefully Pipes, Valves And Specials With The All Types Of Jointing Materials In Trenches Maintaining Proper Levels And Alignment Jointing The Pipes And Specials By Butt Welding / Adopting Suitable Method ( But Weld Jointing With Help Ofhydraulic Tack And Trimming Machines, Hitter Etc. For Reaching At Necessary Melting Point Of Hdpe Pipe So That Joint Can Be Monolithic ) So As To Facilitate The Maintenance Of Pipe Line Locally As Per Conventional Method In Future. ( A ) Pressure Rating : Pn 6Ii ) Laying Of Pipe Line Including Cost Of Pipe & Fittings / Specials Butexcluding Cost Of Valvesa ) 50Mm ( Od ) 244 B ) 63Mm ( Od ) 245 C ) 75Mm ( Od ) 246 D ) 90Mm ( Od ) 247 E ) 110Mm ( Od ) 248 F ) 125Mm ( Od ) 249 G ) 140Mm ( Od ) 250 H ) 160Mm ( Od ) 251 I ) 180Mm ( Od ) 252 J ) 200Mm ( Od ) 253 K ) 225Mm ( Od ) 254 Providing Fhtc From The Existing Cl / Dl / Upvc / Hdpe / Gl / Ac Distribution Pipeline By Installing 10 Mm Nb Gun-Metal Ferrule Conforming To Is 2692:1989 With Latest Amendments On The Said Pipeline With Supply, Fitting & Fixing Of All Other Accessories Like Saddle Piece Of Required Size To Fit The Existing Distribution Pipeline, Specials, Nut & Bolts, Rubber Sheet, Washers Etc And Supply & Laying Of 15Mm Nb Pvc ( Schedule 80 ) / 20Mm Od Hdpe ( Peioo, Pn16 ) Pipe ( Average 15M Length ) With All Necessary Specials 1.0 Metre Below The Ground Connecting The Ferrule Including Cutting Trenches In All Sorts Of Soil And Filling Up Trenches As Per Direction Of The Engineer-In-Charge And Upto A Point Just Inside The Premises Of The Household Or As Directed By Eic. Supply And Installation Of A 15Mm Dia. Alloy Iron Bib Cock ( Tested To 21 Kg / Cm2 ) Above 1.0 Mtr. From Ground, An Alloy Stop Cock Of 15 Mm Dia. With Brass Spindle ( Tested To 21 Kg / Cm2 ) To Be Fitted In A Position As Directed By E.I.C. G.L Pipe Of Tata Make ( Medium Duly ) Of 2 Metre Length With All Necessary Specials To Continue From The End Of The Hdpe / Pvc Pipe And Upto 1.0 M Above Ground Within The Premises Of Household.Note : 1. Pvc Pipe Shall Of Schedule 80 ( Medium Duty ) Conforming To Astmd-1785 And Threaded To Match With Gi Pipe As Per Is: 1239 ( Part-I ) .2. Rate Is Exclusive Of Supply And Delivery Of 10Mm Nb Gun Metal Ferrule.3. Payment Of Supply And Laying Of 15Mm Dia Nb Pvc ( Schedule 80 ) Or 20Mm Od Hdpe ( Pe 100, Pn 16 ) Pipe With All Necessary Specials 1.0M Below The Ground Will Be Made On Actual Measurement Basis. The Rate Of This Item Is Rs. 117 / -Per Metre.A ) Upto 10M Length 255 B ) Above 10M Upto 20M Length 256 Colection Of Household Details As Per Prescribed Formatthrough Mobile App / Hard Copies Including Geo Referance As Diected By E.I.C And Submission Of The Same To The P.H.E Dte.In Soft Copies. 257 Ordinary Cement Concrete ( Mix 1:2:4 ) With Graded Stone Chips ( 20 Mm Nominal Size ) Excluding Shuttering And Reinforcement, If Any, In Ground Floor As Per Relevant Is Codes.A ) Pakur Variety 258 Cost For Boring Any Type Of Soil By Augor Boring ( Horizontal ) With Water Jet System Including Hire Charges Of Machine, Tools & Plants, All Complete With All Labour And Supply Of Water Etc. As Per Specification And Direction Of Eic.I ) 80Mm To 100Mm Dia. 259 Ii ) 125 Mm To 200 Mm Dia 260 Supplying, Fitting And Fixing In Position G.I. Pipes Of Tata Make For Underground Works With All Necessary Accessories, Specials Viz.Socket, Bend, Tee, Union, Cross, Elbow, Nipple, Short Piece Etc.Including Cost Of All Materials, Jointing Materials , Cutting Pipes, Making Threads, Cutting Trenches Upto 1.5 Metre Below Surface In All Sorts Of Soil And Refilling The Same As Directed With Two Coats Of Painting On G.I. Pipes And Specials With Bituminous Paint Complete In All Respect. ( Payment Will Be Made On The Centre Line Measurement Of The Total Pipe Line Including All Specials No Separate Payment Will Be Made For Accessories, Specials.Payment For Painting Will Be Made Seperately ) ( S & P Schedule, Page-2 ) H ) ( Ii ) 80 Mm Dia. Medium Quality. 261 Supplying, Spreading And Consolidating Stone Dust To A Depth Of 100 Mm And Above At Desired Density And C.B.R. As Per Specification With Power Roller To Proper Gradient And Camber Including Watering As Necessary, And Lighting, Guarding, Barricading And Making Adequate Earthen Bundh Where Necessary To Protect The Edges And Curing With Water For 2 To 3 Days, Mending Cracks And Depressions By Rolling Where Necessary Including All Incidental Charges Of Roller, Cost Of Fuel & Lubricants Complete As Per Specification. ( Ref ; Pwd Sor 17 , Page No 242 , Item No 4.06 ) 262 Carriage Of Different Type Of Departmental Pipes From Divisional / Sub-Divisional Store To The Work Site By Truck Including Loading, Unloading, Stacking Etc. Including Cost Of Fuel, Lubricant And Also Cost Of Driver, Helper Etc. And All Other Taxes And Charges As Applicable As Per Direction Of Eicf ) Above 40 Km Upto 50 Km 263 G ) Above 50 Km ( Extra Cost Per Km ) Extra 50 Km ( 4 Nos Truck X 50 Km Each = 200 Km )
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
West Bengal View Result →
38.
Defence #10694380 Price Bid
Tender For Construction Of 03 Nos Bore Well At Nsg Campus Manesar Gurgaon ( Haryana ) .; 1 Earth Work 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. 3 All Kinds Of Soil. 4 Cement Concrete ( Cast In Situ ) 5 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 6 1:5:10 ( 1 Cement : 5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 10 Graded Stone Aggregate 40 Mm Nominal Size Derived From Natural Sources ) 7 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : 8 Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Buttresses, Plinth And String Courses Fillets, Kerbs And Steps Etc. 9 Reinforced Cement Concrete 10 Reinforced Cement Concrete Work In Walls ( Any Thickness ) , Including Attached Pilasters, Buttresses, Plinth And String Courses, Fillets, Columns, Pillars, Piers, Abutments, Posts And Struts Etc. Above Plinth Level Up To Floor Five Level, Excluding Cost Of Centering, Shuttering, Finishing And Reinforcement : 11 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natu- Ral Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) 12 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement With 1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone-Iii ) Derived From Natural Sources : 3 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources ) . 13 Providing And Fixing Tie Bolt, Spring Coil And Plastic Cone In Wall Shuttering Complete As Per The Direction Of Engineer-In-Charge. 14 20 Mm Dia.& 225 Mm Length 15 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 16 Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 17 Flooring 18 52 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 40 Mm Thick Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) And Top Layer 12 Mm Thick Cement Hardener Consisting Of Mix 1:2 ( 1 Cement Hardener Mix : 2 Graded Stone Aggregate 6 Mm Nominal Size ) By Volume, Hardening Compound Mixed @ 2 Litre Per 50 Kg Of Cement Or As Per ManufacturerS Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 19 Finishing 20 6 Mm Cement Plaster Of Mix : 21 1:3 ( 1 Cement : 3 Fine Sand ) 22 Water Supply 23 Providing And Fixing G.I. Pipes Complete With G.I. Fittings Including Trenching And Refilling Etc. External Work 24 65 Mm Dia Nominal Bore 25 Providing And Fixing Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) : 26 25 Mm Nominal Bore 27 Painting G.I. Pipes And Fittings With Two Coats Of Anti-Corrosive Bitumastic Paint Of Approved Quality : 28 65 Mm Diameter Pipe 29 Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. Complete ( New Work ) : 30 65 Mm Nominal Bore 31 Providing Push-On-Joints To Centrifugally ( Spun ) Cast Iron Pipes Or Ductile Iron Pipes Including Testing Of Joints And The Cost Of Rubber Gasket : 32 100 Mm Dia Pipes 33 Drainage 34 Providing M.S. Foot Rests Including Fixing In Manholes With 20X20x10 Cm Cement Concrete Blocks 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) As Per Standard Design : 35 With 20X20 Mm Square Bar 36 Supplying And Fixing C.I. Cover Without Frame For Manholes : 37 455X610 Mm Rectangular C.I. Cover ( Light Duty ) The Weight Of The Cover To Be Not Less Than 23 Kg 38 Rain Water Harvesting & Tubewells 39 Boring / Drilling Bore Well Of Required Dia For Casing / Strainer Pipe, By Suitable Method Prescribed In Is: 2800 ( Part I ) , Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart / Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer-In-Charge, Upto 90 Metre Depth Below Ground Level. 40 All Types Of Soil 41 300 Mm Dia 42 Rocky Strata Including Boulders 43 300 Mm Dia 44 Boring / Drilling Bore Well Of Required Dia For Casing / Strainer Pipe, By Suitable Method Prescribed In Is: 2800 ( Part I ) , Including Collecting Samples From Different Strata, Preparing And Submitting Strata Chart / Bore Log, Including Hire & Running Charges Of All Equipments, Tools, Plants & Machineries Required For The Job, All Complete As Per Direction Of Engineer -In-Charge, Beyond 90 Metre & Upto 150 Metre Depth Below Ground Level. 45 Rocky Strata Including Boulders 46 300 Mm Dia 47 Gravel Packing In Tubewell Construction In Accordance With Is: 4097, Including Providing Gravel Fine / Medium / Coarse, In Required Grading & Sizes As Per Actual Requirement, All Complete As Per Direction Of Engineer-In-Charge. 48 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Erw ( Electric Resistance Welded ) Fe 410 Mild Steel Screwed And Socketed / Plain Ended Casing Pipes Of Required Dia, Conforming To Is: 4270, Of Reputed & Approved Make, Including Painted With Outside Surface With Two Coats Of Anticorrosive Paint Of Approved Brand And Manufacture, Including Required Hire & Labour Charges, Fittings & Accessories, All Complete, For All Depths, As Per Direction Of Engineer-In-Charge. 49 200 Mm Nominal Size Dia Having Minimum Wall Thickness 5.40 Mm 50 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Erw ( Electric Resistance Welded ) Fe 410 Plain Slotted ( Having Slot Of Size 1.6 / 3.2 Mm ) Mild Steel Threaded And Socketed / Plain Bevel Ended Pipe ( Type A ) Of Required Dia, Conforming To Is: 8110, Of Reputed And Approved Make, Having Wall Thickness Not Less Than 5.40 Mm, Including Painted With Outside Surface With Two Coats Of Anticorrosive Bitumestic Paint Of Approved Brand And Manufacture, Including Hire & Labour Charges, Fittings & Accessories, All Complete, For All Depths, As Per Direction Of Engineer -In-Charge. 51 150 Mm Nominal Size Dia 52 200 Mm Nominal Size Dia 53 Development Of Tube Well In Accordance With Is : 2800 ( Part I ) And Is: 11189, To Establish Maximum Rate Of Usable Water Yield Without Sand Content ( Beyond Permissible Limit ) , With Required Capacity Air Compressor, Running The Compressor For Required Time Till Well Is Fully Developed, Measuring Yield Of Well By V Notch Method Or Any Other Approved Method, Measuring Static Level & Draw Down Etc. By Step Draw Down Method, Collecting Water Samples & Getting Tested In Approved Laboratory, I / C Disinfection Of Tubewell, All Complete, Including Hire & Labour Charges Of Air Compressor, Tools & Accessories Etc., All As Per Requirement And Direction Of Engineer-In-Charge. 54 Providing And Fixing M.S. Clamp Of Required Dia To The Top Of Casing / Housing Pipe Of Tubewell As Per Is: 2800 ( Part I ) , Including Necessary Bolts & Nuts Of Required Size Complete. 55 200 Mm Clamp 56 Providing And Fixing Bail Plug / Bottom Plug Of Required Dia To The Bottom Of Pipe Assembly Of Tubewell As Per Is:2800 ( Part I ) . 57 150 Mm Dia 58 Mr Items 59 Charges For Conducting Geophysical Surface Resistivity Investigation For Tubewell Site Selection To Find Out Thickness Of Alluvial, Protential Zones, Water Quality Variation With Depth & Type Of Rig To Be Deployed. 60 Electrical 61 Supplying, Installation, Testing And Commissioning Of Multi Stage Submersible Pump Set, In Bore Well Complete Withcoupled Totally Enclosed Electric Motor Suitable For 415 Volt, 50 Hz, 3 Phase A. C. Supplyincluding Water Proof Jointing Of Cables. ( Excluding Lowering Charges, Lowering Charges Of Submersible Pumpset Included In The Item Lowering Of Column Pipe ) ( Horse Power Of The Motor , Stage , Lpm & Head Of The Submersible Pump Will Be Decided By Engg In Charge On Basis Of Yield Report Submitted By The Contractor ) 62 Providing And Loweringgi Pipes Class B Marked With Is: 1239 In 6 M Length, Including Threading And Welding With Flanges ( Heavy Duty ) On Both Sides, Jointing With Nuts And Bolts, Rubber Gaskets, Into Tube Wells And Testing Commissioing Etc. Complete In All Respects To The Satisfaction Of Engineer-In- Charge. ( Make :Isi Marked B Class Jindal Hisar / Tata / Prakash Surya / Swastik / Zenith Maked G.I. Pipe ) 63 50Mm Dia 64 65Mm Dia 65 Supplying And Laying Of One Numberflat Copper Conductor Submersible Cable Of Following Size Pvc Insulated And Pvc Sheathed Flat Copper Submersible Cable Of 1.1 Kv Grade Along Thelength Of Coloum / Delivery Pipe / In The Existing Masonry Open Duct / Along Wall Surface / Cable Tray / Loose For Connections / In Existing Pvc Casing / Capping Etc. As Required. ( Isi Marked Make Havells / Polycab / Finolex / Rr Kabel ) 66 3 X 4.0 Sqmm 67 Supplying & Fixing Nylon Rope 16Mm Dia Complete With Shackles For Fixing Of Pump Set During The Lowering Of Pumpset To Avoid Slippage Complete As Reqd . 68 Providing And Fixing Three Phasesubmersible Pump Controllers With Single Phase Preventer Submersible Motormodel Mug15fasd Make L&T Suitable Relay Rangeor Equivalent In Havells & Siemens In Existing Cubicle Panel Board Making Connections, Etc. As Required. ( Relay Range & Horse Power Of The Starterwill Be Decided By Engg In Charge On Basis Of Submersible Motor Capacity ) 69 Supply, Installation, Testing And Commissioning Of Outdoor Type Totally Enclosed, Dust And Vermin Proof, Pedestal Mounted Inspection Box / Junction Box Of A Suitable Size But Not Less Than 600 Mm Wide X 450 Mm Height X 450 Mm ( Deep ) Fabricated From 2 Mm Thick Crca Sheet Steel Having Front And Back Openable Doors With Locking Arrangement On Both Sides, Tapered Top ( Roof ) , Including Detachable Cable Gland Plate Made Of 3 Mm Thick Crca Sheet, Including Pre-Paint Treatment, Phosphating And Powder Coating By Approved Siemens Grey Paint, Earthing Stud, Danger Notice Plate Fixed, Complete As Required. The Feeder Pillar Should Be Complete With A Mounting Frame Made Of 50 Mm X 50 Mm X 6 Mm Angle Iron With 900 Mm Long Legs. The 4 Legs Of The Feeder Pillar Shall Be Erected On A Suitable Size 1:3:6 Cement Concrete ( 1:3:6 Cement; 3 Sand; 6 Graded Stones Of 20 Mm Size ) Pedestal Having 900Mm Of Depth ( 600Mm Below Ground & 300Mm Above Ground ) . 70 Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 71 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 72 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 73 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc., Complete As Required. 74 90 Mm Dia ( Od-90 Mm & Id-76 Mm Nominal ) 75 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Ii Complete With Fitting And Cutting, Jointing Etc.Direct In Ground ( 75 Cm Below Ground Level ) In The Existing Trench Complete As Required. 76 90 Mm Dia ( Od-90 Mm & Id-76 Mm Nominal ) 77 The Road Crossings Of Power Cablethrough Trenchless Boring.Trenchless Boring Using Manual / Machine Moling Techniqueat 0.75 Metre Below The Ground Level For Following Size Pipes, Including Survey Of Under Ground Utilities, Excavation Of Pits, Moling With The Hole Size Not Exceeding 20% Of The Pipe Dia, Backfilling, Compaction And Restoration Of The Pits To Original Condition Etc. As Required.The Rates For Moling, As Indicated Are Inclusive Of Excavation Of Pits, Backfilling, Compaction Andrestoration Of The Pits To Original Condition. Any Damages Occurred To Other Utilities During The Moling Operation Shall Be Immediately Notified And Rectified By The Contractor Without Any Cost Implication To The Department. The Length Of The Hole ( Excluding The Sizes Of The Pits On Both Ends ) Shall Be Considered For The Measurement Of Moling Length. However, Intermediate Pits Will Consider In The Moling Length.I ) Upto 150 Mm Dia Dwc Hdpe / G.I. / Pvc 78 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required. 79 3.5 X 35 Sq. Mm 80 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size Direct In Ground Including Excavation And Refilling The Trench Etc As Required, But Excluding Sand Cushioning And Protective Covering. 81 3.5 X 35 Sq. Mm 82 Supplying And Laying Of One Number Aluminium Conductor, Xlpe Insulated, Pvc Sheathed, Armoured Power Cable Of 1.1 Kv Grade , Confirming To Is : 7098 ( Part-1 ) 1988 Of Following Size In The Existing Masonry Open Duct / Along Pole / Loose For Connections Etc As Required. 83 3.5 X 35 Sq. Mm 84 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required 85 3.5 X 35 Sq. Mm 86 Supplying And Making Cable Route Marker With Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size ) Of Size 60 Cm X 60 Cm At The Bottom And 50 Cm X 50 Cm At The Top With A Thickness Of 10Cm Including Inscription Duly Engraved As Required. 87 Add 1.0633 Multiplying Factor For Gst On Dsr
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Haryana View Result →
39.
Power #10574490 Price Bid
Construction Of33 / .04 Kv S / S ( 2X1000 Kva ) Tilapur ( Dattaha ) Pump Cannaldistt- Ballia And 14.00 Km Long33 Kv Line Tilapur ( Dattaha ) Pump Cannal Line From 132 / 33 Kv S / S Husainabad ( Bansdeeh ) In Distt- Balliaunder Deposit Scheme 2022-23. 1 Supply Of Materials ( 33 / .04 Kv Substation ) 2 33Kv Vcbwith Structure 3 33Kvcontrol Pannel For Single T / F Control Panel 4 33Kvct 200 / 100 / 1A With Structure 5 33Kv Pt O / D 33 / 110V 6 33Kv L.A. ( 01 Set=3 Nos ) 7 33 Kv Post Insulator. 8 33 Kv Disc Insulator 70Kn 9 33 Kv Disc Fitting B&S 10 33 Kv Polymer Pin Insulator 11 33 / 0.4 Kv 1000 Kva T / F 12 Acsr Dog Conductor 13 Lt Pvc Cable I / C 3.5X400mm2 14 33 Kv Busbar Gantry With Two Nos Structure 15 33 Kv La Structure 16 33 Kv Isolator Structure 17 33 Kv Post Structure 18 33 Kv Fuse Set Structure 19 33 Kv Pt Structure ( 01 Setfor 3 Nos Pt ) 20 90 Lbs Rail 2.5 Mtr Long For Two Nos Plinth 21 33 Kv Fuse Set Complete 22 33 Kv Bus Isolator 23 33 Kv Line Isolator 24 Ms Angle 65X65x6mm 25 24 Volt Battery With Charger With Cabinet 26 Control Cable 2X2.5Mm2 27 Control Cable 4X2.5Mm2 28 Pg Clamp Of Dog Conductor 29 Al Lug 300 Sqmm For Lt Cable Long Size 30 Lt Incomming Pannel 31 Lt Outgoing Pannel 32 Lt Distribution Pannel 33 Rubber Mat 34 Fire Fighting Stand With Bucket 35 Hand Gloves 36 Furnitures 37 S / S Name Board And Arrow Board 38 33 Kv Vcb Connecter 39 33 Kv Ct Connecter 40 33 Kv La Connecter 41 33 Kv Top Channel For Cable Stand 42 Erectionwork 43 Erection & Grouting Of33kv Busbar Gantry With Two Nos Structure As Per Resspo Norms 44 Erection & Grouting Of33kv La Structure As Per Resspo Norms 45 Erection & Grouting Of33kv Isolator Structure As Per Resspo Norms 46 Erection & Grouting Of33kv Post Structure As Per Resspo Norms 47 Erection & Grouting Of33kv Fuse Set Structure As Per Resspo Norms 48 Erection & Grouting Of33kv Ct Structure As Per Resspo Norms 49 Erection & Grouting Of33 Kv Bus Isolator & Line Isolator Structure As Per Resspo Norms 50 Erection & Grouting Of33 Kv Pt Structure As Per Resspo Norms ( 1 Set=3 Nos Pt ) 51 90 Lbs Rail 2.5 Mtr Long For Two Nos Plinth As Per Resspo Norms 52 Erection & Grouting Of33kv Vcb With Structureas Per Resspo Norms 53 Erection & Grouting Of 33Kv Control Pannel For Single T / F As Per Resspo Norms 54 Erection & Grouting Of 33 Kv C.T. 200 / 100 / 1 Ampas Per Resspo Norms 55 Erection & Mounting Of33 Kv Pt O / D 33 / 110V As Per Resspo Norms 56 Erection & Mounting Of33 Kv L.A. As Per Resspo Norms 57 Erection & Mounting Of33kv Post Insulator As Per Resspo Norms 58 Erection & Mounting Of33kv Fuse Set Complete As Per Resspo Norms Providing Suitable Size Of 2 Set ( 12 No ) Copper Z Clamp With Nut Bolt ( 1 Set =6 No Copper Z Clamp ) 59 Erection & Mounting Of33kv Bus Isolator As Per Resspo Norms 60 Erection & Mounting Of33 Kv Line Isolator As Per Resspo Norms 61 33Kv Disc Insulator 70Kn As Per Resspo Norms 62 33Kv Disc Fitting B&S As Per Resspo Norms 63 33Kv Polymer Pin Insulatoras Per Resspo Norms 64 Installation Of 33 / 0.4Kv 1000 Kva T / F As Per Resspo Norms And Connections Of All Jumpers With Providing Suitable Size Of 2 Set ( 14 No ) Copper Z Clamp With Nut Bolt ( 1 Set =7 No Copper Z Clamp ) 65 Ms Angle 65X65x6mm For Neutral Stand As Per Resspo Norms 66 Acsr Dog Conductor 67 Earthing Of Switchyard Of O / D Structures And Equipments With Earthmat As Per Resspo Norms For 2 No Power T / F. 68 Earthing Of I / D Equipments As Per Resspo Norms 69 Plinth And Foundation Powert / F As Per Resspo Norms 70 Plinth And Foundation Of Vcb As Per Resspo Norms 71 Laying Of Lt Pvc Cable I / C 3.5X400mm2 From 1000 Kva T / F To Metering / Control Room & Load Point With Complete In All Respect As Per Resspo Norms After Providing Alluminium Lug Suitable Size. 72 Separate 2 No Body Earthing & 1 No Delta Earthing Of Neutral Of T / Fs With 40Mm Dia Gi Pipe 30 Feet Long As Per Resspo Norms Upto Water Label. 73 24 Volt Battery With Charger With Cabinet 74 Armoured Control Cable 2X2.5Mm2 As Per Resspo Norms 75 Armouredcontrol Cable 4X2.5Mm2 As Per Resspo Norms 76 Pg Clamp Of Dog Conductor 77 Al Lug 300 Sqmm Long Size For Lt Cable As Per Resspo Norms 78 Insttalation & Connction Of Lt Incomming Pannel As Per Norms With All Required Materials 79 Insttalation & Connction Of Lt Outgoing Pannel As Per Norms With All Required Materials 80 Insttalation & Connction Of Lt Distribution Pannel As Per Norms With All Required Materials 81 S / S Name Board And Arrow Board As Per Resspo Norms 82 Cost Of Pakka Trench For Laying Of Control Cables As Per Resspo Norms 83 Outdoor Switchyard Lighting ( With Supply, Erection & Painting Of7 No 9 Mtr St Poles, 250 Mtr 4 Core Alluminum Cable For Connection, 7 No 120 Watt Led Street Light With Clamp For St Poles Complete Work Upto Enerzigation After Providing All Materials. 84 Construction Of Approach Road Inside The Switchyard 1.5 Mtr Wide With 1St Class Bricks On Edge Soling & Tipping Complete Work Including Cost Of All Materials. 85 Painting Of All Structures & Equipments As Per Resspo Norms 86 Supply Of Materials ( 33 Kv Line ) 87 St Pole 11 Mtr 88 St Pole 13 Mtr 89 Acsr Dog Conducter 90 33 Kv V Type X-Arm 91 33 Kvdisc Fitting B& S 92 33 Kv Polymer Pin Insulater 93 33 Kv Xlpe Cable 3X300 Mm2 94 33 Kv Polymer Disc Insulater B& S 95 Gi Wire 6&10 Swg 96 33 Top Channel Clamp For St Pole 11 Mtr With Nut Bolt 97 33 Kv Garding Angle Clamp With Nut Bolt With Nut Bolt 98 33 Kv E-Clamp For Stp 11 Mtr With Nut Bolt 99 33 Kv Bracing Angle Clamp For Stp Top / Botttom Pole With Nut Bolt 100 Pg Clamp For Dog To Dog 101 33 Kv Cable Jointing Kit 3X300mm2 O / D 102 33 Kv Cable Jointing Kit 3X300mm2 S / T 103 Danger Board With Clamp With Nut & Bolt 104 Nut & Bolt Different Sizes 105 Gi Barbed Wire 106 Packing Piece For St Pole 107 33 Kv X-Arm Clamp For 11 Mtr St Polewith Nut Bolt 108 33 Kv F Bracket For St Pole 11 Mtr With Nut Bolt 109 33 Top Channel 110 Earthing Complete 111 33 Kv Stay Set Complete ( 20X1800 Mm ) 112 33 Kv Bracing Angle 113 33 Kv Garding Angle 114 Erectionwork 115 Erection Of Single Pole Structure On 11Mtr St. ( Sp-55 ) Pole Including All Works Of Evocation Of Pit, Pole Erection, Making Plinth For Poles 30 Cm Above , Grouting In The Ratio 1:4:8 ( Cement, Sand, 40Mm Brick Ballast ) , Back Filling Of Earth , Proper Ramming & Fitting Of All Accessories 116 Erection Of Single Pole Structure On 13 Mtr St. ( Sp-55 ) Pole Including All Works Of Evocation Of Pit, Pole Erection, Making Plinth For Poles 30 Cm Above , Grouting In The Ratio 1:4:8 ( Cement, Sand, 40Mm Brick Ballast ) , Back Filling Of Earth , Proper Ramming & Fitting Of All Accessories 117 Erection Of Double Pole Structure On 11 Mtr St Pole Including All Works Of Evocation Of Pit, Pole Erection, Making Plinth For Poles 30 Cm Above , Grouting In The Ratio 1:4:8 ( Cement, Sand, 40 Mm Brick Ballast ) , Back Filling Of Earth , Proper Ramming & Fitting Of All Accessories. 118 Erection Of Double Pole Structure On 13 Mtr St Pole Including All Works Of Evocation Of Pit, Pole Erection, Making Plinth For Poles 30 Cm Above , Grouting In The Ratio 1:4:8 ( Cement, Sand, 40 Mm Brick Ballast ) , Back Filling Of Earth , Proper Ramming & Fitting Of All Accessories. 119 Erection Of Four Pole Structure On 11 Mtr St Pole Including All Works Of Evocation Of Pit, Pole Erection, Making Plinth For Poles 30 Cm Above , Grouting In The Ratio 1:4:8 ( Cement, Sand, 40 Mm Brick Ballast ) , Back Filling Of Earth , Proper Ramming & Fitting Of All Accessories. 120 Laying, Spreading, Lifting And Final Sagging Of 3 Phases Of Acsr Dog Conductorin Accordance With Profile And Sag Chart Including Binding, Jumpering And Fixing Of P.G. Clamp As Per Requirement In 03 Nos. Conductor In Parallel. 121 Laying Of 33 Kv 3X300 Mm² ‘Xlpe’ Cable ( D / C ) By Digging Pit & Making Trench In Proper Size Below Ground Level By Fixing Bricks ( 4½? ) On Both Side Of Trench Wall And 9? Brick Work At The Centre Of The Trench Along The Cable.Fixing Brick Slab On Top After Filling Sand Around Both The Cable Including Cost Of Bricks. / Hdd Method As Per Size Required ( For 33 Kv Line And Metering Unit ) 122 Laying Of 33Kv ‘Xlpe’ Cable In Air After Providing 6” Dia. M.S Pipe 3.5 M Long Complete Work. 123 Special Gi Pipe Earthing Complete With Materials For 33 Kv ‘Xlpe’ C / J Kit. 124 Jointingcharges Of 33 Kv ‘Xlpe’ C / J Kit 3X300mm² Outdoor 125 Jointingcharges Of 33 Kv ‘Xlpe’ C / J Kit 3X300mm² Straight Through 126 Grouting Of Stay Rods ( 20 X 1800 ) Mm Including All Work Including Back Filling, Proper Ramming Etc. Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing. 127 Chopping Of Branches Of Trees Of Eucalyptus, Neem, Keekar And Other Kind Of Trees Along The Route Of The Line And Disposal Of The Same At Suitable Place. 128 Guarding Between Two Poles Like Single Poles, Double Poles, Four Poles, Etc. To Guard Lt, 11 Kv Line Telephone And River Crossing, Road Crossing Etc. With G.I. Wire No. 6 Swg And G.I. Wire No. 8 Swg, Cutting, Fabrication And Fixing Of Guarding Channel . 129 Earthing Of Poles 130 Painting Of Poles 131 Fixing Of Dangerboardwithclampfor33kv Line-1700000114 132 Fixing Of Barbedwire- 1400000219 133 Making Plinth For St Polespoles As Per Resspo- 1000001733 134 Shifting Of Existing Single Poles Of Ht / Lt Lines For Providing Passage For 33 Kv Line Tilapur Dataha By Safe Dismentling Of Existing Single Pole & Re-Erection Of Existing Poles With Complete Work Afterproviding Side -Arm With All Accessories . 135 Shifting Of Existing11 Kv Line / Lt Line On Acsr Weasal / Dog Conducter By Safe Dismentling Of Acsr Weasal / Dog Conducter & Re-Stringing Of Acsr Weasal / Dog Conducter On Shifted Poles With Complete Work After Providing All Required Materials For Shifting.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Uttar Pradesh View Result →
40.
Drinking Water Supply and Sanitation #10562597 Price Bid
Tender For Water Supply Scheme For Augmentation Of Uwss Kushalgarh District Banswara Including 05 Years Om After 01 Year Of Defect Liability Period Under Amrut 2, Water Supply Scheme for Augmentation of UWSS Kushalgarh, District Banswara including 05 years O&M after 01 year of Defect Liability Period under AMRUT 2.0 Sl. No. Item Description 1 Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work)Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item andshall not be paid separately. 2 100 mm 3 150 mm 4 200 mm 5 Providing, lowering, laying and jointing in trenches, standardlengths HDPE ISI marked Pipes as per IS-4984: 1995 (amended up to date) with necessary jointing material like mechanical connectors, i.e. thread/ insert joint/ quick release coupler joint/ compression fitting joint or flanged joint and specials jointing pipe by electro fusion welding method, including all taxes , transportation and freight charges, inspection charges, loading/ unloading charges, stacking of pipes, including cost of labour and material, specials (Tee, bend etc.), satisfactory hydraulic testing,disinfection, commissioning etc. complete as per technicalspecifications and direction of Engineer-in-charge of following classand diameter. (excluding earth work) .Note : Providing and fixing of all requisite specials as per drawing,design and layout are inclusive in RM measurement of the item andshall not be paid separately.Supply may be in coil or straight length in 6 M/12 M. 6 HDPE PE-100PN-6 7 90 mm 8 Fabrication, supply of flanged/ plain ended MS pipe made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete (excluding flanged jointing wherever required) including all material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer.Note : E/w to be measured and paid separately. 9 MS pipe specials upto 600mm dia (with minimum 5mm thickness sheet) 10 Providing Household Tap Connection as per technical specification andapproved drawing as per relevant IS code (amended up to date) fromHDPE/uPVC/DI/AC/MS/GI pipe line up to consumer meter/premisesby using PP mechanical Integrated saddle with inbuilt flow controlvalve made out of SS316 designed for 5 LPM discharge at 0.5 barpressure , not exceeding the flow of 7 LPM at 2 bar and acompression elbow, moulded in single piece/ fusion welded(Complete job) including digging out suitable size of pits and trench forlaying service line in all kinds of soil; depositing and refilling of pit &jhiri with watering & ramming /compacting in layers and disposal ofsurplus excavated soil as directed with in a lead of 100 meter ;providing & fixing of all fitting duly approved in accordance withspecification for potable water including GM Full-way Valve (IS:778Mark) or wheel valve and specials with 20 mm nominal dia MDPE pipePE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Threelayered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and aboveground level using PPR-C pipe with standard PPR fittings/ GI pipes inthe premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe linecomplete required for making of service connection complete in allrespect including labour charges . The service line should be laid atleast 45 cm below ground level.Note: Road cut and restoration is not part of this item and paidseparately. 11 For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr. 12 Road cutting for house hold service connection in minimum trench width wherever road crossing is required. Road cutting of cement concrete,WBM, Black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with Cement concrete with PCC M-10 and CCM-30 grade as per specification and direction of Engineer in charge.. 13 Add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm PE 80 PN 16 as per ISO 4427 MDPE pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. 14 Supply & Fixing of ISI marked three core PVC flat submersible cableas per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc. 15 3 core 16.0 Sq.mm 16 Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade withaluminium conductor Armoured of IS:7098-I/1554-1 approved make in groundas per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thickunder layer of sand, second Class bricks covering, refilling earth, compactionof earth, making necessary connection, testing etc. as required of size. 17 Armoured Cable16.0 Sq. mm 4 core 18 Plate Earthing as per IS:3043 with G.I. Earth plate of size 600mm x 600mm x6.0mm by embodying 3 to 4 mtr. below the ground level with 20 mm dia. G.I.B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and C.C. finished chamber covered with hinged type with locking arrangement C.I. Cover, C.I. Frame of size 300mm x 300mm complete with alternate layers of salt and coke/charcoal, testing of earth resistance asrequired. 19 Providing & Lowering in tube well ISI marked GI Pipe medium duty (“B class),Steel tube as per IS:1239 or amended up to date and zinc coating as per IS4736, threaded and double flanged (welded) on both ends and two number25x3mm MS flat welded on both ends between pipe & flange, rubber washer &nut bolts etc. complete in all respect. 20 65 mm dia 21 Construction and commissioning of RCC INTZE type Over Head Service Reservoir of following capacity and staging as per the Scope of work and Technical specifications, consisting of the following main activities: -a) Topographic survey, preparation of site contour plan, conducting SBC testand its approval from departmentbefore construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation, all RCC Work, Plinth protection all around the structure including all material, labour, shuttering, scaffolding etc.c) OHSR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the edge of outer most projection of OHSR.The plinth protection shall consist of 150mm thick PCC in M-15 grade concrete laid over 150mm thick layer of compacted soil.d) Providing and applying two coats of food grade epoxy paint on the inside surface on the top dome, edge beam and 600 mm height of the vertical wall.e)Conducting successfully hydro test and water tightness test as per I.S. code.f) Providing and applying three coats of anti-carbonation paint on the top surface of the Top Dome.g) Providing and applying three coats of cement-based paint on the external surface of the container, balcony, cone wall, columns & beams etc..h) Providing and fixing SS-304 ventilator, SS 304 manhole frame and cover and SS-304 ladder from top dome/Slab to bottom dome/Slab inside container. i) Providing and fixing of MS section ladder from the last landing to balcony having railing all around it and MS ladder with safety cage from balcony to top dome/slab.j) Providing and fixing water level indicator (float type).k) Providing and fixing of hand railing all around the balcony, top dome and staircase consisting of 25mm diameter Class-B GI pipe in two rows and 1000 mm high, 50X50X6mm angle iron vertical post at a maximum spacing of 1500mm centres.l) All MS parts to be painted with two coats of the enamel paint over the primer coat of red oxide.m) Providing and fixing of 150mm wide PVC water bar for the construction joints in the container (vertical wall & cone wall).n) Providing one Aluminium portable ladder of appropriate length to access first landing (3.5 to 4.5m above GL) from ground.o) Lighting arrestor consisting of providing and fixing of 2 Nos.of chemical earthing and connecting it to the conical cover of SS ventilator with two separate GI strips of 50mmX3mm.p) CI/DI puddle collar shall be fixed in the bottom dome/ slab for connecting inlet, outlet, overflow and washout pipe of the reservoir.q) Painting the name of the scheme and other details on the reservoir, and any other work related to structure as per the directions of Engineer-in- Charge, Technical Specification and Scope of Work.r) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 22 Rates for RCC OHSR,SBC 10 T/sqm, SEISMIC ZONE-II & STAGING 18 M 23 400 KL 24 Construction of RCC (Flat slab type) Clear Water Reservoir of following capacity as per the Scope of work and Technical specification, consisting of the following main activities: -a) Topographic survey, preparation of site contour plan, conducting SBC test and its approval from department before construction. Submission and approval of concrete mix design and water quality test report for water to be used in construction. b) Excavation in all types of soil, PCC below foundation & all RCC Work including all labour and material charges including providing and fixing of accessories such as SS ladder, SS manhole frame and covers, water level indicator (float type), SS ventilator with SS screen, float valve, puddle collars, G.I. pipe railing around walk way, Top Dome/Slab, Staircase. c) CWR shall be provided with adequate plinth protection all around the structure in a width starting from edge of structure at GL and extending at least up to 1.0m beyond the vertical wall of CWR. The plinth protection shall consist of 150mm thick PCC in M-15 concrete over 150mm thick compacted soll fill.d) Providing and applying two coats of food grade epoxy paint on the inside surface of the roof slab, and 600 mm height of the vertical wall.e) Successful hydro test and water tightness test as per 1.S. code.f) Providing and applying three coats of anti-carbonation paint on the roof Slab. g) Providing and applying three coats of cement-based paint on the remaining external surface area of the structure.h) Providing and fixing SS-304 ventilator, 55 304 manhole frame and cover and 55 304 ladder from roof slab to bottom Slab, inside container. Providing and fixing water level indicator (Float type).i) Providing and fixing MS ladder from ground to top slab.j) All MS parts to be painted with two coats of the enamelled paint over the primer coat of red oxide. k) Providing and fixing of 150mm wide water bar for the construction joints in the container.l) Providing and fixing CI/DI puddle collars the vertical wall for connecting inlet, outlet, overflow and washout pipes of the reservoir.m) Inlet, outlet, overflow, washout pipes and valves are not included in this work, provision for the same shall be taken separately. 25 Rates for RCC Partially Underground type clear water reservoir SBC 7 T/sqm, SEISMIC ZONE-2,3 & 4 26 150 KL 27 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required suchas duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope ofwork. 28 For OHSR 29 100 mm 30 200 mm 31 Providing and fixing double flanged ISI marked DI Class K-9 pipes as per IS:8329-2000 (amended up to date), as vertical pipes for RCC Reservoirs including specials required suchas duck foot bend, bend, tee etc. providing and fixing clamps at every 3 mtr, jointing materials such as nuts, bolt, rubber packing, hydraulic testing etc. complete in all respect up to and from valve chamber as per direction of EIC, Technical Specification and Scope ofwork. 32 For OHSR 33 200 mm 34 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipeline including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth includingconsolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 Mtr. including required all safety provisions etc.:All kinds of soil 35 In All Typeof Soil 36 Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in trenches of required width and gradient for laying and jointing of pipe line including excavation for sockets, and dressing of sides, ramming ofbottoms, depth up to 1.5 Mtr. including taking out the excavated soil, and then returning the soil as required in layers not exceeding 20cm in depth includingconsolidating each deposited layer by ramming, watering etc. and stacking serviceable material for measurements and disposal of unserviceable material as directed, with in a lead of 50 Mtr. including all safety provisions required . 37 Ordinary rock 38 Hard rock(blasting prohibited) 39 Dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by CCcutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000meters. Measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. 40 Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 50 metres as directed by Engineer. 41 Bituminous courses 42 Granular courses 43 Providing and laying in position cement concrete M10 grade nominal mix 1:3:6 (1 Cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting,guarding for road restoration work in trenches of pipe line and chamber work. Measurement for CC work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. 44 Providingand laying in position cementconcrete in specified gradeover prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line andchamberwork.MeasurementforCCworktobemade asperstandard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified,complete work as per technical specification and scope of work. 45 M20 grade Nominal Mix1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 46 Providing, installation, testing and commissioning of Centrifugal Monoblockpump set conforming to IS 9079 , 2 pole motor operating at synchronisedspeed of 3000 RPM with requisite MOC impeller, priming funnel, cock,suitable flanges at suction and delivery side. Pump shall have common shaftfor pump and motor. Motor shall be suitable for working on 415 V ± 10%, 3Ph, 50 Hz A.C. Supply. Motor shall be TEFC type and Pump set shall besuitable for working at various discharge and head requirements as perscope of work. Pump shall be erected on C.C. foundation / cross channels /RSJ frame block with suitable foundation bolts grouted in C.C. foundationblock etc. complete in all respect as per specification, scope of work anddirection of Engineer in Charge of following power rating, suitable forprescribed duty conditions mentioned in TD. 47 Centrifugal Monoblock Pump set (Single Stage) 48 11.0 KW (15 HP) 49 Providing, installation, testing and commissioning of submersible Monoblock pump set conforming to IS 8034 and 2 pole motor operating atsynchronised speed of speed 3000 RPM, with water proof winding. Pumpshall be suitable for various delivery head and discharge with stainless steelshaft. Motor suitable for working on 415 V ± 10%, 3 Ph, 50 Hz AC and withwater lubricated bearing to accept entire hydraulic thrust. Supply, with cableguard, thrust carbon/fibre bearing to withstand entire hydraulic thrust. Thepump set shall be suitable for direct coupling, with suitable suction strainer.Pump should have suitable discharge out let as per manufacturers design.Antithrust stream lined non return valve shall be provided with the pumpand minimum 6 m submersible copper conductor cable in single / doublerun and 2 pairs of suitable size erection clamp 10 mm thick shall be providedwith each pump etc. complete in all respect as per specification, scope ofwork and direction of Engineer in Charge of following posion : Less than 1.6mm Variation in thickness: Less than 3.2 mm) 50 submersibleMonoblock Pump set (Single Stage) 51 15.0 KW (20.0 HP) 52 Providing,lowering, aligning,fixingin positionin pipeline,CID/FSluicevalvesstraight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS, Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside,Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steelInsertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 53 Manually Operated CI Sluice valve of Class PN-1.0 54 100 mm HW 55 200 mm HW 56 Providing, lowering, aligning, fixing in position and Jointing in pipe line, CI Double Acting Kinetic Air Valve with isolating Sluice Valve of approved makes for following pressure rating & dia complete, confirming to IS: 14845-2000 (amendedup to date) and of following specifications: Body , Cover and Cowl - Grey Cast Iron as per IS:210- FG 200 ,Float - Stainless Steel AISI 304 / IS: 3444 , Float GuideHBT1.HP Orifice- HTB2/ SS,Body seat ring - Leaded tin bronze/ SS .Seal ring and face ring - EPDM/NBR ,Ends flanged according to IS 6418,Fastners - CS, Epoxy paint inside outside of food grade safe for drinking water ,Valves including all material,labour, testing and commissioning as per Technical Specifications and as per direction of Engineer in charge.Note: Rates are exclusive of connecting tee, pipe piece and earth work. 57 Class PN 1.0 58 40 mm 59 50 mm 60 Providing, lowering, aligning, fixing in position in pipe line at work site, DI D/F Resilient seated (soft seated) Sluice Valves (Gate Valves) , Vacuum tight(bubble tight), straight and pocket less body passage of approved make of following class & dia complete confirming to BS-EN-1171/ AWWA C-509 and of following specifications: Body & bonnet of Ductile cast iron of grade GGG40/GGG50 as per DIN 1693 or GR SG-400/12 as per IS 1865 or equivalent grade as per IS :3896-part2-1985 and subsequent revisions, Wedge of same material as body & shall vulcanisedrubber lined with EPDM (food grade quality) and seals of NBR Face to face dimensions as per BS 5163-89/ IS 14846/2000 (amended up to date) /Din 3202 F4, Stem/ spindle of SS AISI 316/410 Electrostatic epoxy powder(EP-P)/ Fusion bond epoxy ( Non-Toxic- suitable for drinking water) coated with minimum thickness of 250 microns inside and outside, Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367(Galvanised steel) Insertion rubber of black EPDM 6mm thick. Suitablesupport structure as per directions of EIC, Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. 61 Manually Operated Resilient Seated Sluice Valves of Class PN 1.6 62 100 mm 63 150 mm 64 200 mm 65 Providing, lowering, laying, aligning, fixing in position and jointing CI dismantling joint (Suitable for Sluice valves etc.) as per IS specificationscompleteofthefollowingsizesincludingall jointing material,costofalllabour,testingandcommissioning Technical Specifications and as per direction of Engineer. Class PN 1.0 66 100 mm dia. 67 150 mm dia. 68 200 mm dia. 69 SITCSTAR DELTA Starter type LT Panel of followingrating:all switchgears are of PHED approved makes, CRCA sheet of Panel enclosure is of TATA/ Essar 1.6mm/ 2.0mm thick duly Electrostatic Powder Coated withangleframeincludingotherancillaries(Insulators, AcrylicSheet , Backlight Sheet, Hardware, Wire, Name Plates, Lugs, Pvc Channel , Mcb Chanel , Lock, Hing , Bidding , Connectors, Neutral Links , Spiral , Saddle & Packing Material ) etc. and 100A/ 125A ,TPN, Aluminium Bus Bar with Colour coated heat shrinkage sleeves complete as per Technical Specifications and as per direction of Engineer-In-Charge. 70 STAR DELTA STARTER 11.0 KW (15.0 HP)- :For 2 motors (1 W+ 1S)I/C -MCB 63A ,FP, 10 KA, C Curve (1) , Analog Voltmeter 96*96mm ( 0- 500V ) (1), Volt Selector Switch (1) , Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 60/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue - 1 ) (1), Control MCB 6A SP 10 KA C Curve (3) andO/G-MCB 40A ,TP, 10 KA, C Curve (2), Power Cont 25A TP AC3 Duty(2),2NO+2NCAux.Block(2),ThermalOverloadRelay(9-13A)(2),Control MCB6ASP10KACCurve(2),SinglePhasePreventer(2),Indicating Lights (Red- 1, Green - 1, Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/D Timer(2) 71 STARDELTASTARTER 15.0KW (20.0HP) : For2motors(1W+ 1S)I/C- MCCB 100A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (1),Spreaders (2),Extended Rotary Handle (1) , Analog Voltmeter96*96mm(0-500V)(1),VoltSelectorSwitch(1),Analog Ammeter 96*96mm ( 0-60A ) (1), Amp. Selector Switch (1), C. T. 100/5A CL 1.0 5VA (3) , Indicating Lights ( Red-1, Yellow -1) (2), Indicating Lights ( Blue-1)(1),ControlMCB6ASP10KACCurve(3) andO/G-MCCB 63A TPN 25 KA With T/M Based Over Current & Short Circuit Protection (2), Power Cont 32A TP AC3 Duty(2), 2 NO+2 NC Aux. Block(2), Thermal Overload Relay (12-18A )(2), Control MCB 6A SP 10 KA C Curve (2),SinglePhasePreventer(2),IndicatingLights(Red-1,Green-1,Amber-1)(6), Push Button 22.5 ( Red - 1, Green - 1 )(4), Selector Switch 1 Pole, 2 Way (2), Capacitor 440VAC Heavy Duty MPP Type 7.5Kvar (2), S/DTimer(2) 72 Construction of boundary wall of Brick/ stone masonry as per enclosed GAdrawing, scope of work and technical specifications complete work in allrespect. Brief details of boundary wall parameter is as below:1. Depth of foundation- 900 mm.2. PCC in M-10, width -900 mm and thickness 100 mm,3. Stone masonry in CM: 1:6 section of foundation above PCC, 600mm (W )x 450 mm (D) and 450 mm (W) x 450 mm (D)4. Superstructure work: Stone masonry in CM: 1:6, W-300, height-1650mm,/ Brick work in CM: 1:6 W-230 mm, height- 1650 mm.5. Cement mortar pointing on Stone masonry and cement mortar plaster20 mm thick on brick masonry in CM 1:6.6. Expansion joint shall be on every 30 mtr.7. On top of wall there shall be CC Coping 75 mm thick (1:2:4) shall beprovided.8. Pillar for main gate 350x350 mm in size is part of boundary wall.9. Cement paint of approved colour in 3 coat shall be done. 73 Providing and fixing steel, gate, grating and grills made of angles, tees,square bars, flats or black pipe with hold fast and fitting complete as perdesign and drawing including cutting welding and fabrication with primingcoat of red oxide and two coat of enamel paints. 74 Construction of Pump house of RCC framed structure with pump pit in RCCwalls as per scope of work and technical specification complete work in allrespect including electrical works for indoor and outdoor lighting and fans,rain water drainage, sanitary, plumbing, monorail/ EOT crane etc. completeas per direction of Engineer-in-charge. The GA, structure, electrical,sanitary, P&ID, SLD to be prepared by the contractor and submitted todepartment for approval for earth quake zone II. 75 Pump House with Monorail arrangement 76 ConstructionofRCCSluicevalvechamberfordifferenttypeofvalves includingearthworkexcavation,100mmPCCM15 aslevellingcourse, RCC M25 grade for base slab, side wall & cover slab , including cost of steelreinforcement,formwork,Pre-castslabs,plasticencapsulated CI/MS Foot Rest, MS flats for the support of pre-cast, proper curing of concrete work complete in all respect as perspecifications and standard drawings and as per direction of Engineer-in-Charge. 77 For Class-A loading 78 Sluice valve chamber of size1.13m x0.85m x1.27mfor pipe size-upto100mm 79 Sluice valve chamber of size1.17m x0.95m x1.415mfor pipe size-from 125-to-150mm 80 Sluice valve chamber of size1.26m x1.185m x1.82mfor pipe size-from 200-to-300mm 81 Construction of RCC Air valve chamber for different type of valvesincluding earthwork excavation, 100mm PCC M15 as levelling course,RCC M25 grade for base slab, side wall & cover slab , including cost ofsteel reinforcement , form work, Pre-cast slabs, Plastic encapsulatedCI/MS Foot Rest, MS flats for the support of pre-cast, proper curing ofconcrete work complete in all respect as per specifications andstandard drawings and as per direction of Engineer-in-Charge. 82 Air valve chamber of size0.9m x1m x1.695mfor air valve size-from 50 mm-to-80mm 83 SITC of Bulk Flow Meter with removable mechanism class B confirming to ISO:4064:2005/ IS: 2373of approved make of following dia sized pipelines andspecificationscomplete: Media:Water(Clear),Temp.50deg.,Pr. rating:PN16,Protectiontype:IP-68, BodyMaterial:IS-210Gr.FG-200, AccuracyClass:ClassB(±2%@Nominalflowrate),MagneticDrive, Dry Dial, Epoxy powder coated, Pulse out put option, Anti-magnetic protection including all materials and making connection with existing pipeline required for Bulk Flow Meter including cutting the existing pipeline etc. complete in all respect as per technical specification and as per direction of Engineer In- Charge.Note: Rates are exclusive of tail piece / dismantling joints and earth work. 84 BFM 200 mm 85 Design, construction, commissioning & testing of Non Mechanical RapidGravity Filter Plant of capacity as under. This work includes constructionof RCC receiving chamber, baffle channel, flocculate, clarifier, collectingchannel, filter beds , operation gallery, clear water chamber, channel,chlorination chamber, Back wash tank, pipe system for carrying rawwater from Pump House to inlet of RGF, clear water from Plant to CWR,De-sludging system including providing pipe system from clarifier ,flocculate & back wash water chamber to existing storage tank, overhead back wash tank, back wash pumps (1W+1S) set with piping system,air blowers (1W+1S) as per design, interconnection of raw water, clearwater, sludge pipes etc. including allied works such for construction,commissioning of system as defined in scope of work, technicalspecifications and provisions of CPHEEO manual at various water supplyschemes 86 Up to 40 KLH capacity 87 Providing, laying, spreading and compacting of granular sub-base by providing close graded Material, mixing in a mechanical mix plant atOMC, carriage of mixed Material to work site, spreading in uniformlayers with motor grader on prepared surface and compacting withvibratory power roller to achieve the desired density, complete asper MoRT&H specification clause - 401 including all material, labour,machinery, lighting, guarding and maintenance of diversion.Grading - I Material 88 Providing, laying, spreading (with paver finisher only) andcompacting wet mix macadam (WMM) base course comprising ofgraded stone aggregate and granular material conforming toMORT&H specifications (Table 400-II) in layers of equal compactedthickness each consolidated, including pre-mixing the material withwater at OMC in mechanical mixer (Pug Mill), carriage of mixedmaterial by tippers to site, laying in uniform layers in base course ona well prepared sub-base/ base course and compacting with powervibratory-roller to achieve the desired density complete as perMoRT&H specification clause - 406 including all material, labour,machinery, lighting, guarding and maintenance of diversion. 89 Providing and applying primer coat over prepared surface of granular base with bitumen emulsion as per IS : 8887 and approved quality @ 0.6 kg/sqm with the help of spray set fitted on bitumen Container (boiler) after cleaning the surface including removing of binding material and other foreign matter with wire brushes and small picks, sweeping with brooms or soft brushes and finally dusting with old gunny bags and compressed air to receive bituminous treatment complete as per clause 502 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. 90 Extra for additional bitumen emulsion used in above item for every 1 kg per 10 sqm 91 Providing and laying open graded premix carpet 20mm thick (compacted), on prepared surface in a single course as wearing course, composed of specified graded crushed stone aggregate as per Table 500-23, premixed with bituminous binder @ 14.60 kg/ 10sqm (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required), including loading of material with F.E. loader, hot mixing of stone aggregate and bitumen in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting smooth wheeled roller 8-10 tonne capacity and finishing to required level to achieve the desired density as per clause 511 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding cost of tack coat/ seal coat. 92 With Bitumen VG-grade 30 93 Providing laying and consolidation Semi Dense Bituminous Concrete, as per Design Mix (approved by Engineer), on prepared surface with specified graded crushed aggregates as per table 500-15 for wearing coarse including loading of material with F.E. loader, hot mixing of stone aggregate, filler and bitumen (including Cost of anti-stripping compound Minimum 1% in Lime/Cement as per design wherever required) heating and mixing in in computerised hot mix plant, transporting the mixed material by tippers to paver and laying with paver finisher fitted with electronic sensor control to the required level and grade, compacting by power rollers and vibratory rollers or 150 to 250 KN pneumatic tyred roller with TP = 0.7 Mpa, to achieve the desired density (approximately 2.3 tonne/cum) complete as per clause 508 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion but excluding primer/tack coat. 94 25-30 mm compacted thickness (Grade-2) using Bitumen VG-grade 30 @ 5% (percent by weight of total mix) 95 Bored cast-in-situ R.C.C. pile with cutting / Drilling for anchoring of pile into rocks wherever firm rocky strata is available, shall be done upto desired depth (minimum 1.50 m) as per drawings, specifications and as directed by Engineer. Bore hole shall be cleaned properly before concreting. No, distinction shall be made for penetration through hard rock or rock socketing with design mix concrete (M-35) using batching plant, transit mixer and concrete pump excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. as per clause 1100, 1600 & 1700 of MoRT&H Specification including all material, labour and machinery. 96 450mm dia pile 97 Providing, installation, testing and commissioning of Diaphragm Type Pressure Gauges Dial size 150 mm glycerin filled shatterproof glass, Over range protection: 125% of maximum pressure, Material of sensor and other wetted parts: SS type 316, Housing material: Die cast aluminum 98 Filling available excavated earth (excluding rock) in trenches, plinth side of foundation etc. in layers not exceeding 20 cm. in depth, consolidating each deposited layer by ramming and watering including lead up to 50 meter and with all lift. 99 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. 100 M10 grade Nominal Mix 1: 3: 6 (1 cement : 3 coarse sand : 6 graded stoneaggregate 20mm nominal size). 101 Supporting block of size 2m, 1.2m 102 For height 10m 103 Providing and laying in position specified grade ofcement concrete forall RCC structural elements upto plinth level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement: 3 coarse sand) and making good the joints and cost of plastizers( if required) excluding the cost of centering, shuttering and reinforcement. M20 grade Nominal Mix / Design Mix 104 Providing M-30 grade concrete by usingcement as per codal provision instead ofM-20 grade design mix. 105 Centering and Shuttering with plywood or steel sheets including strutting, propping bracing both ways and removal of formwork for foundation , footings,strap beam, raft , bases of columns etc. 106 Suspended floors, roofs, landings, staircases, balconies, girders, cantilevers, bands, coping bed plates,anchorblocks,sills,chhajjas,lintel,beam, plinth beam etc. 107 Columns, pillars, posts and struts etc. 108 Structural steel work riveted,bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 109 Cost for Basic Service Charges, Administration and Management, Running of Operation, Maintenance and Repairs including Preventive Maintenance, Cost of material required for maintenance & repairs, Cost of Lubricants, Consumables, Spare Parts (if the spare parts supplied to PHED are used in emergency)as per Scope of Work & terms & conditions of contract for 05 year after defect laibility period of one year DLP (except power feeder, IEC & miscllenous provision) for Water Supply Project 110 1st year 111 2nd year 112 3rd year 113 4th year 114 5th year
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Rajasthan View Result →
41.
New and Renewable Energy #10553288 Price Bid
Rate Contract For Spares For Epiroc Make U/G Equipment , Rate Contract For Spares For Epirocmake U/G Equipment , Cable, 1-Core Part No.-0017206030 , Cable, 1-Core Part No.-0017206040 , Cable, 1-Core Part No.-0017206050 , Cable, 1-Core Part No.-0017206070 , Cable, 1-Core Part No.-0017207120 , Cable, 1-Core Part No.-0017210030 , Cable, 4-Core Part No.-0017230722 , Kabel, 4-Ledare Part No.-0019840529 , Prot Hose Part No.-0070402406 , Slang Part No.-0070402410 , Protection Hose Part No.-0070402412 , Protection Hose Part No.-0070402413 , Plastic Tube Part No.-0070600204 , Plastic Tube Part No.-0070600209 , Water Hose Part No.-0075400568 , Water Hose Part No.-0075400569 , Hydraulic Ho Part No.-0075500556 , Hydraulic Ho Part No.-0075500557 , Protection H Part No.-0075500563 , Warning Label Part No.-0088000775 , Mounting Rail Part No.-0090140002 , Rubbermoulding Part No.-0090700501 , Pin Part No.-0101136200 , Pin Part No.-0101136400 , Pin Part No.-0101146000 , Pin Part No.-0101195128 , Cylindric Pi Part No.-0101195163 , Parallell Pi Part No.-0101195170 , Pin Part No.-0101231600 , Pin Part No.-0101268000 , Pin Part No.-0101829100 , Pin Part No.-0102022200 , Pin Part No.-0102040500 , Pin Part No.-0102041000 , Cyl.Pin Part No.-0102041500 , Pin Part No.-0102045800 , Pin Part No.-0102046000 , Pin Part No.-0102046900 , Pin Part No.-0102047300 , Pin Part No.-0102047600 , Parallel Pin Part No.-0102048200 , Parallel Pin Part No.-0102062600 , Pin Part No.-0102095151 , Pin, Grooved Part No.-0106621700 , Spring Pin Part No.-0108110310 , Spring Pin Part No.-0108119300 , Spring Pin Part No.-0108119800 , Spring Pin Part No.-0108120000 , Spring Pin Part No.-0108124000 , Spring Pin Part No.-0108132200 , Spring Pin Part No.-0108133200 , Spring Pin Part No.-0108135300 , Spring Pin Part No.-0108136100 , Spring Pin Part No.-0108136200 , Spring Pin Part No.-0108136300 , Spring Pin Part No.-0108136600 , Spring Pin Part No.-0108137000 , Spring Pin Part No.-0108139000 , Spring Pin Part No.-0108139400 , Spring Pin Part No.-0108139500 , Spring Pin Part No.-0108139600 , Spring Pin Part No.-0108139700 , Spring Pin Part No.-0108139900 , Spring Pin Part No.-0108140000 , Spring Pin Part No.-0108140100 , Spring Pin Part No.-0108140200 , Spring Pin Part No.-0108141500 , Spring Pin Part No.-0108142300 , Spring Pin Part No.-0108142700 , Spring Pin Part No.-0108149400 , Spring Pin Part No.-0108152100 , Spring Pin Part No.-0108152400 , Spring Pin Part No.-0108169039 , Spring Pin Part No.-0108169064 , Spring Pin Part No.-0108169077 , Spring Pin Part No.-0108332200 , Spring Pin Part No.-0108333200 , Spring Pin Part No.-0108335300 , Spring Pin Part No.-0108335900 , Spring Pin Part No.-0108339200 , Spring Pin Part No.-0108340000 , Spring Pin Part No.-0108342300 , Saxpinne Part No.-0111122900 , Saxpinne Part No.-0111125300 , Split Pin Part No.-0111128100 , Split Pin Part No.-0111130700 , Split Pin Part No.-0111137700 , Split Pin Part No.-0111145300 , Locking Clip Part No.-0111168605 , Lassprint Part No.-0111168608 , Ring Pin Part No.-0111168611 , Ring Pin Part No.-0111168613 , Ring Pin Part No.-0111168614 , Pin Part No.-0111168615 , Bolt Part No.-0113223100 , Bolt Part No.-0113241300 , Pin Part No.-0113241500 , Blind Rivet Part No.-0129310300 , Blindnit Part No.-0129310400 , Blind Rivet Part No.-0129310800 , Blind Rivet Part No.-0129312500 , Blind Rivet Part No.-0129320700 , Blind Rivet Part No.-0129327044 , Screw, Hex Head Part No.-0144320303 , Screw, Hex Head Part No.-0144320503 , Hexagon Screw Part No.-0144320603 , Screw, Hex Head Part No.-0144320703 , Hex. Head Screw Part No.-0144320803 , Screw, Hex Head Part No.-0144320903 , Hexagon Screw Part No.-0144321103 , Screw, Hex Head Part No.-0144321203 , Screw, Hex Head Part No.-0144324116 , Screw, Hex Head Part No.-0144324118 , Screw, Hex Head Part No.-0144324290 , Screw, Hex Head Part No.-0144324294 , Hexagon Screw Part No.-0144324303 , Hexagon Screw Part No.-0144324305 , Screw, Hex Head Part No.-0144324503 , Screw, Hex Head Part No.-0144324603 , Screw, Hex Head Part No.-0144324703 , Screw, Hex Head Part No.-0144324803 , Screw, Hex Head Part No.-0144324903 , Screw, Hex Head Part No.-0144325103 , Hexagon Screw Part No.-0144325303 , Screw, Hex Head Part No.-0144328203 , Screw, Hex Head Part No.-0144328403 , Screw, Hex Head Part No.-0144328503 , Screw, Hex Head Part No.-0144328603 , Screw, Hex Head Part No.-0144328703 , Screw, Hex Head Part No.-0144328803 , Screw, Hex Head Part No.-0144329003 , Screw, Hex Head Part No.-0144329103 , Hexagon Screw Part No.-0144329203 , Screw, Hex Head Part No.-0144329703 , Hexagon Screw Part No.-0144330403 , Screw, Hex Head Part No.-0144332603 , Screw, Hex Head Part No.-0144336003 , Screw, Hex Head Part No.-0144336203 , Screw, Hex Head Part No.-0144336303 , Screw, Hex Head Part No.-0144336503 , Screw, Hex Head Part No.-0144336603 , Screw, Hex Head Part No.-0144336703 , Screw, Hex Head Part No.-0144336803 , Screw, Hex Head Part No.-0144337003 , Hexagon Screw Part No.-0144337203 , Screw, Hex Head Part No.-0144337703 , Capscrew Part No.-0144337903 , Screw, Hex Head Part No.-0144400032 , Capscrew,Hex Part No.-0144400084 , Hexagon Screw Part No.-0144400122 , Screw, Hex Head Part No.-0144400124 , Screw, Hex Head Part No.-0144400126 , Screw, Hex Head Part No.-0144400129 , Hexagon Screw Part No.-0144400135 , Capscrew,Hex Part No.-0144400175 , Hexagon Screw Part No.-0144400195 , Hexagon Screw Part No.-0144400199 , Hexagon Screw Part No.-0144400201 , Hex. Head Screw Part No.-0144400206 , Hex. Head Screw Part No.-0144400214 , Hex. Head Screw Part No.-0144400215 , Screw, Hex Head Part No.-0147120503 , Screw, Hex Head Part No.-0147120703 , Screw, Hex Head Part No.-0147120803 , Screw, Hex Head Part No.-0147121303 , Screw, Hex Head Part No.-0147124203 , Screw, Hex Head Part No.-0147124303 , Screw, Hex Head Part No.-0147124403 , Screw, Hex Head Part No.-0147124603 , Screw, Hex Head Part No.-0147124702 , Screw, Hex Head Part No.-0147124703 , Screw, Hex Head Part No.-0147124803 , Screw, Hex Head Part No.-0147124903 , Screw, Hex Head Part No.-0147125003 , Screw, Hex Head Part No.-0147125103 , Screw, Hex Head Part No.-0147125203 , Screw, Hex Head Part No.-0147125303 , Screw, Hex Head Part No.-0147125403 , Screw, Hex Head Part No.-0147125603 , Screw, Hex Head Part No.-0147125803 , Screw, Hex Head Part No.-0147125903 , Screw, Hex Head Part No.-0147126203 , Screw, Hex Head Part No.-0147131903 , Screw, Hex Head Part No.-0147132003 , Screw, Hex Head Part No.-0147132103 , Screw, Hex Head Part No.-0147132203 , Screw, Hex Head Part No.-0147132303 , Screw, Hex Head Part No.-0147132403 , Screw, Hex Head Part No.-0147132503 , Screw, Hex Head Part No.-0147132603 , Screw, Hex Head Part No.-0147132703 , Screw, Hex Head Part No.-0147132712 , Screw, Hex Head Part No.-0147132803 , Screw, Hex Head Part No.-0147132903 , Screw, Hex Head Part No.-0147133003 , Screw, Hex Head Part No.-0147133103 , Screw, Hex Head Part No.-0147133203 , Screw, Hex Head Part No.-0147133303 , Screw, Hex Head Part No.-0147133403 , Screw, Hex Head Part No.-0147133503 , Screw, Hex Head Part No.-0147133603 , Screw, Hex Head Part No.-0147134303 , Screw, Hex Head Part No.-0147135603 , Screw, Hex Head Part No.-0147135703 , Screw, Hex Head Part No.-0147135803 , Screw, Hex Head Part No.-0147135903 , Screw, Hex Head Part No.-0147136003 , Screw, Hex Head Part No.-0147136103 , Screw, Hex Head Part No.-0147136203 , Screw, Hex Head Part No.-0147136303 , Screw, Hex Head Part No.-0147136403 , Screw, Hex Head Part No.-0147136503 , Screw, Hex Head Part No.-0147136505 , Screw, Hex Head Part No.-0147136603 , Screw, Hex Head Part No.-0147136703 , Hex. Head Screw Part No.-0147136712 , Screw, Hex Head Part No.-0147136803 , Screw, Hex Head Part No.-0147136812 , Screw, Hex Head Part No.-0147136903 , Screw, Hex Head Part No.-0147137003 , Screw, Hex Head Part No.-0147137103 , Screw, Hex Head Part No.-0147137203 , Screw, Hex Head Part No.-0147137303 , Screw, Hex Head Part No.-0147137503 , Screw, Hex Head Part No.-0147137703 , Screw, Hex Head Part No.-0147137903 , Screw, Hex Head Part No.-0147137912 , Screw, Hex Head Part No.-0147138103 , Screw, Hex Head Part No.-0147138203 , Hex Head Cap Part No.-0147139703 , Screw, Hex Head Part No.-0147139803 , Hex Head Cap Part No.-0147139903 , Screw, Hex Head Part No.-0147140003 , Screw, Hex Head Part No.-0147140103 , Screw, Hex Head Part No.-0147140203 , Screw, Hex Head Part No.-0147140303 , Screw, Hex Head Part No.-0147140307 , Screw, Hex Head Part No.-0147140309 , Screw, Hex Head Part No.-0147140403 , Screw, Hex Head Part No.-0147140503 , Screw, Hex Head Part No.-0147140603 , Screw, Hex Head Part No.-0147140703 , Hex Head Cap Part No.-0147140803 , Screw, Hex Head Part No.-0147140903 , Screw, Hex Head Part No.-0147141003 , Screw, Hex Head Part No.-0147141103 , Screw, Hex Head Part No.-0147141112 , Screw, Hex Head Part No.-0147141303 , Screw, Hex Head Part No.-0147141503 , Screw, Hex Head Part No.-0147141512 , Screw, Hex Head Part No.-0147141703 , Skruv, Sexkant Part No.-0147141800 , Screw, Hex Head Part No.-0147141803 , Screw, Hex Head Part No.-0147141903 , Screw, Hex Head Part No.-0147142003 , Screw, Hex Head Part No.-0147143803 , Hex Head Cap Part No.-0147144003 , Screw, Hex Head Part No.-0147144103 , Screw, Hex Head Part No.-0147147303 , Hex Head Cap Part No.-0147147403 , Screw, Hex Head Part No.-0147147603 , Screw, Hex Head Part No.-0147147703 , Screw, Hex Head Part No.-0147147803 , Screw, Hex Head Part No.-0147147903 , Screw, Hex Head Part No.-0147148003 , Screw, Hex Head Part No.-0147148103 , Screw, Hex Head Part No.-0147148203 , Screw, Hex Head Part No.-0147148303 , Screw, Hex Head Part No.-0147148403 , Screw, Hex Head Part No.-0147148503 , Screw, Hex Head Part No.-0147148703 , Hex Head Cap Part No.-0147148803 , Hex Head Cap Part No.-0147148903 , Screw, Hex Head Part No.-0147149103 , Screw, Hex Head Part No.-0147149203 , Screw, Hex Head Part No.-0147149403 , Screw, Hex Head Part No.-0147149503 , Screw, Hex Head Part No.-0147149603 , Screw, Hex Head Part No.-0147149903 , Screw, Hex Head Part No.-0147150003 , Screw, Hex Head Part No.-0147150103 , Screw, Hex Head Part No.-0147154803 , Screw, Hex Head Part No.-0147155003 , Screw, Hex Head Part No.-0147155303 , Screw, Hex Head Part No.-0147155403 , Screw, Hex Head Part No.-0147155503 , Screw, Hex Head Part No.-0147155703 , Screw, Hex Head Part No.-0147155903 , Screw, Hex Head Part No.-0147156403 , Screw, Hex Head Part No.-0147157103 , Screw, Hex Head Part No.-0147157403 , Hex Head Cap Part No.-0147164303 , Screw, Hex Head Part No.-0147195776 , Screw, Hex Head Part No.-0147195796 , Hexagon Screw Part No.-0147195827 , Screw, Hex Head Part No.-0147195865 , Screw, Hex Head Part No.-0147195884 , Screw, Hex Head Part No.-0147195899 , Screw, Hex Head Part No.-0147196026 , Screw, Hex Head Part No.-0147196028 , Screw, Hex Head Part No.-0147196069 , Sexkantsskru Part No.-0147196119 , Screw, Hex Head Part No.-0147196136 , Screw, Hex Head Part No.-0147196180 , Screw, Hex Head Part No.-0147196181 , Screw, Hex Head Part No.-0147196228 , Screw Part No.-0147196264 , Hex Head Cap Part No.-0147196285 , Flange Screw Part No.-0147300017 , Standard Scr Part No.-0147300025 , Flange Screw Part No.-0147300033 , Flange Screw Part No.-0147300034 , Screw Part No.-0160099611 , Screw, Slotted Part No.-0160099613 , Screw, Slotted Part No.-0160124400 , Screw, Slotted Part No.-0160603600 , Screw, Slotted Part No.-0160603900 , Screw, Slotted Part No.-0160604100 , Screw, Slotted Part No.-0160604200 , Screw, Slotted Part No.-0160605900 , Screw, Slotted Part No.-0160606100 , Screw, Slotted Part No.-0160606200 , Screw, Slotted Part No.-0160606300 , Screw, Slotted Part No.-0160608400 , Screw-Slotte Part No.-0162156727 , Screw, Slotted Part No.-0162417400 , Screw, Slotted Part No.-0162420500 , Screw, Slotted Part No.-0162432200 , Screw, Slott Part No.-0162436000 , Set Screw Part No.-0190324101 , Set Screw Part No.-0192117000 , Set Screw Part No.-0192120400 , Set Screw Part No.-0194132000 , Set Screw Part No.-0196120300 , Set Screw Part No.-0196124200 , Set Screw Part No.-0196131800 , Set Screw Part No.-0196155210 , Set Screw Part No.-0196155224 , Hex Sock. Screw Part No.-0211110272 , Hex Sock. Screw Part No.-0211110501 , Screw Part No.-0211110603 , Screw Part No.-0211117003 , Screw Part No.-0211117300 , Screw Part No.-0211117303 , Screw Part No.-0211117403 , Screw Part No.-0211117600 , Screw Part No.-0211117703 , Hex Sock. Screw Part No.-0211117803 , Screw Part No.-0211120303 , Screw Part No.-0211120503 , Screw Part No.-0211120700 , Screw Part No.-0211120703 , Screw Part No.-0211120800 , Screw Part No.-0211120803 , Screw Part No.-0211121103 , Skruv Part No.-0211121200 , Screw Part No.-0211121400 , Screw Part No.-0211121500 , Screw Part No.-0211121503 , Screw Part No.-0211122300 , Skruv Part No.-0211124303 , Screw Part No.-0211124403 , Screw Part No.-0211124603 , Screw Part No.-0211124703 , Screw Part No.-0211124903 , Skruv Part No.-0211125000 , Skruv Part No.-0211125100 , Screw Part No.-0211125103 , Screw Part No.-0211125203 , Screw Part No.-0211125403 , Screw Part No.-0211132003 , Screw Part No.-0211132303 , Screw Part No.-0211132503 , Screw Part No.-0211132603 , Screw Part No.-0211132703 , Screw Part No.-0211136003 , Screw Part No.-0211136203 , Screw Part No.-0211136303 , Screw Part No.-0211136403 , Screw Part No.-0211136503 , Screw Part No.-0211136703 , Screw Part No.-0211136803 , Screw Part No.-0211136903 , Screw Part No.-0211140203 , Screw Part No.-0211140303 , Screw Part No.-0211143800 , Screw Part No.-0211143900 , Screw Part No.-0211144000 , Screw Part No.-0211147703 , Screw Part No.-0211149700 , Hex Sock. Screw Part No.-0211195733 , Screw Part No.-0211196044 , Screw Part No.-0211196078 , Screw Part No.-0211196081 , Screw Part No.-0211196082 , Screw Part No.-0211196083 , Screw Part No.-0211196084 , Screw Part No.-0211196085 , Screw Part No.-0211196086 , Screw Part No.-0211196272 , Screw Part No.-0211196278 , Screw Part No.-0211196280 , Screw Part No.-0211196281 , Screw Part No.-0211196285 , Screw Part No.-0211196288 , Screw Part No.-0211196289 , Screw Part No.-0211196291 , Screw Part No.-0211196292 , Screw Part No.-0211196294 , Screw Part No.-0211196295 , Screw Part No.-0211196298 , Screw Part No.-0211196302 , Screw Part No.-0211196303 , Screw Part No.-0211196305 , Screw Part No.-0211196307 , Screw Part No.-0211196309 , Screw Part No.-0211196314 , Screw Part No.-0211196323 , Screw Part No.-0211196328 , Screw Part No.-0211196329 , Screw Part No.-0211196333 , Screw Part No.-0211196334 , Screw Part No.-0211196336 , Screw Part No.-0211196337 , Screw Part No.-0211196340 , Screw Part No.-0211196341 , Screw Part No.-0211196345 , Screw Part No.-0211196347 , Screw Part No.-0211196348 , Screw Part No.-0211196351 , Screw Part No.-0211196354 , Screw Part No.-0211196383 , Screw Part No.-0211196388 , Screw Part No.-0211196391 , Hex Sock. Screw Part No.-0211196402 , Hex Sock. Screw Part No.-0211196435 , Skruv Part No.-0211196518 , Hex Sock. Screw Part No.-0211196558 , Screw Part No.-0211528800 , Screw Part No.-0211529300 , Screw Part No.-0211532800 , Schrew Part No.-0211533100 , Screw Part No.-0211536300 , Screw Part No.-0211536500 , Hex Sock. Screw Part No.-0211537900 , Hexagon Screw Part No.-0215000380 , Hex Sock. Screw Part No.-0216110008 , Hex Sock. Screw Part No.-0216110011 , Screw Part No.-0216124300 , Screw Part No.-0216124703 , Screw Part No.-0216124900 , Sexkanthalsk Part No.-0216195761 , Wing Screw Part No.-0223132202 , Shoulder Scr Part No.-0223400046 , Shoulder Scr Part No.-0223400051 , Tapping Screw Part No.-0226030600 , Tapping Screw Part No.-0226030700 , Tapping Scre Part No.-0226031000 , Gängande Skruv Part No.-0226032600 , Tapping Screw Part No.-0226035005 , Gängande Skruv Part No.-0226035101 , Gängande Skruv Part No.-0226035107 , Tapping Screw Part No.-0226330023 , Tapping Scre Part No.-0226332005 , Screw Part No.-0226991512 , Sq. Neck Bol Part No.-0226991519 , Welding Bolt Part No.-0228100010 , Screw, Drive Part No.-0244414300 , Screw Part No.-0244416400 , Screw, Drive Part No.-0244416600 , Stud Part No.-0246195490 , Pinnskruv Part No.-0246195648 , Stud Part No.-0246195652 , Stud Part No.-0246288811 , Threaded Rod Part No.-0248997918 , Thread.Rod Part No.-0248997927 , Threaded Rod Part No.-0248997954 , Thread.Rod Part No.-0248997986 , Threaded Rod Part No.-0248998009 , Threaded Rod Part No.-0248998035 , Gangad Stang Part No.-0248998068 , Thread Insert Part No.-0259001100 , Thread Insert Part No.-0259006800 , Thread Insert Part No.-0259008400 , Thread Insert Part No.-0259008600 , Thread Inser Part No.-0259015007 , Thread Insert Part No.-0259015010 , Thread Inser Part No.-0259031006 , Thread Inser Part No.-0259031009 , Thread Insert Part No.-0259031100 , Gänginsats Part No.-0259200900 , Threadinsert Part No.-0259201000 , Threadinsert Part No.-0259201300 , Threadinsert Part No.-0259201400 , Threadinsert Part No.-0259203900 , Threadinsert Part No.-0259204500 , Threadinsert Part No.-0259204600 , Gänginsats Part No.-0259205800 , Thread Insert Part No.-0259206100 , Gänginsats Part No.-0259206200 , Thread Insert Part No.-0259207303 , Threadinsert Part No.-0259208200 , Nut Part No.-0261109011 , Hexagon Nut Part No.-0261109012 , Nut Part No.-0261109028 , Mutter M20x1 Part No.-0261109911 , Nut Part No.-0261211000 , Nut Part No.-0261211100 , Nut Part No.-0261211200 , Nut Part No.-0261211400 , Nut Part No.-0261211600 , Mutter Part No.-0266111504 , Mutter Part No.-0266210700 , Nut Part No.-0266210800 , Mutter Part No.-0266211000 , Mutter Part No.-0266211100 , Nut Part No.-0266211200 , Mutter Part No.-0266211400 , Nut Part No.-0266211600 , Hexagon Nut Part No.-0268413805 , Cap Nut Part No.-0277112814 , Cap Nut Part No.-0277113004 , Cap Nut Part No.-0277131000 , Slotted Nut Part No.-0281136600 , Lock Nut Part No.-0291111000 , Lock Nut Part No.-0291111200 , Lock Nut Part No.-0291111400 , Lock Nut Part No.-0291112804 , Lock Nut Part No.-0291112807 , Lock Nut Part No.-0291112812 , Lock Nut Part No.-0291112813 , Låsmutter Part No.-0291112814 , Låsmutter Part No.-0291112815 , Lock Nut Part No.-0291112816 , Låsmutter Part No.-0291112818 , Lock Nut Part No.-0291112819 , Lock Nut Part No.-0291112820 , Lock Nut Part No.-0291112821 , Låsmutter Part No.-0291112822 , Låsmutter Part No.-0291112825 , Låsmutter Part No.-0291112826 , Lock Nut Part No.-0291112828 , Låsmutter Part No.-0291112830 , Lock Nut Part No.-0291112842 , Lock Nut Part No.-0291112843 , Lock Nut Part No.-0291112844 , Locknut Part No.-0291112845 , Lock Nut Part No.-0291112866 , Lock Nut Part No.-0291118001 , Lock Nut Part No.-0291118002 , Lock Nut Part No.-0291118549 , Låsmutter Part No.-0295310500 , Lock Nut Part No.-0295310600 , Lock Nut Part No.-0295311300 , Vingmutter Part No.-0296111000 , Wing Nut Part No.-0296111100 , Bl.Rivet Nut Part No.-0298100019 , Wheel Nut Part No.-0299100005 , Hjulmutter Part No.-0299100006 , Hjulmutter Part No.-0299100008 , Wheel Nut Part No.-0299100009 , Wheel Nut Part No.-0299100010 , Plain Washer Part No.-0300027406 , Plain Washer Part No.-0300027413 , Plain Washer Part No.-0300027416 , Plain Washer Part No.-0300027417 , Plain Washer Part No.-0300027434 , Plain Washer Part No.-0300027449 , Plain Washer Part No.-0300027464 , Bricka Part No.-0300027474 , Plain Washer Part No.-0300027483 , Plain Washer Part No.-0300027491 , Plain Washer Part No.-0300027493 , Plain Washer Part No.-0300027502 , Plain Washer Part No.-0300027507 , Plain Washer Part No.-0300027528 , Plain Washer Part No.-0300027605 , Plain Washer Part No.-0300027609 , Plain Washer Part No.-0300027626 , Rundbricka Part No.-0300027632 , Plain Washer Part No.-0300027678 , Plain Washer Part No.-0300800500 , Plain Washer Part No.-0300800600 , Plain Washer Part No.-0300801000 , Plain Washer Part No.-0300801100 , Plain Washer Part No.-0300801900 , Plain Washer Part No.-0300802200 , Plain Washer Part No.-0301212101 , Plain Washer Part No.-0301230900 , Plain Washer Part No.-0301231500 , Plain Washer Part No.-0301231800 , Plain Washer Part No.-0301232100 , Plain Washer Part No.-0301233500 , Plain Washer Part No.-0301234300 , Plain Washer Part No.-0301234400 , Washer Part No.-0301235800 , Plain Washer Part No.-0301236400 , Plain Washer Part No.-0301237100 , Plain Washer Part No.-0301237800 , Plain Washer Part No.-0301238600 , Plain Washer Part No.-0301239400 , Plain Washer Part No.-0301240500 , Plain Washer Part No.-0301240504 , Plain Washer Part No.-0303115900 , Plain Washer Part No.-0303127401 , Plain Washer Part No.-0303127404 , Sfärisk Bricka Part No.-0304101200 , Sfärisk Bricka Part No.-0304106200 , Square Washe Part No.-0306200009 , Spacer Sleeve Part No.-0324100030 , Spacer Sleeve Part No.-0324113000 , Spacer Sleeve Part No.-0324120102 , Sleeve Part No.-0324125300 , Spacer Sleeve Part No.-0324127300 , Spacer Sleeve Part No.-0324146300 , Adjust. Washer Part No.-0324155016 , Adjust. Wash Part No.-0324155040 , Adjust. Washer Part No.-0324155147 , Adjust. Washer Part No.-0324155148 , Spacer Ring Part No.-0324155156 , Support Ring Part No.-0324155161 , Backup Ring Part No.-0324155185 , Back- Up Rin Part No.-0324155187 , Back-Up Ring Part No.-0324155189 , Back-Up Ring Part No.-0324155190 , Spacing Scre Part No.-0324180012 , Spacing Nut Part No.-0324180044 , Spacing Screw Part No.-0324180047 , Speric Washer Part No.-0333050002 , Con.Washer Part No.-0333050003 , Conical Wash Part No.-0333050008 , Speric Washer Part No.-0333050024 , Spring Washer Part No.-0333213000 , Spring Washer Part No.-0333213600 , Spring Washer Part No.-0333217421 , Spring Washe Part No.-0333217429 , Spring Washer Part No.-0333217434 , Spring Washe Part No.-0333217457 , Spring Washer Part No.-0333223000 , Lock Washer Part No.-0333311401 , Låsbricka Part No.-0333312000 , Låsbricka Part No.-0333312700 , Låsbricka Part No.-0333313200 , Lock Washer Part No.-0333317415 , Lock Washer Part No.-0333520008 , Lock Washer Part No.-0333520009 , Lock Washer Part No.-0333520010 , Lock Washer Part No.-0333520013 , Lock Washer Part No.-0333520016 , Lock Washer Part No.-0333520017 , Låsbricka Part No.-0333610500 , Lock Washer Part No.-0333610600 , Lock Washer Part No.-0333610700 , Lock Washer Part No.-0333611300 , Lock Washer Part No.-0333612300 , Circlip Part No.-0335110425 , Circlip Part No.-0335110430 , Circlip Part No.-0335111800 , Circlip Part No.-0335111900 , Circlip Part No.-0335112700 , Circlip Part No.-0335113200 , Circlip Part No.-0335113300 , Circlip Part No.-0335114100 , Circlip Part No.-0335114300 , Circlip Part No.-0335114500 , Circlip Part No.-0335114600 , Circlip Part No.-0335114700 , Circlip Part No.-0335115100 , Circlip Part No.-0335115200 , Circlip Part No.-0335115600 , Circlip Part No.-0335115800 , Circlip Part No.-0335116000 , Circlip Part No.-0335116100 , Circlip Part No.-0335116200 , Circlip Part No.-0335116900 , Circlip Part No.-0335117800 , Circlip Part No.-0335118200 , Circlip Part No.-0335118400 , Circlip For Part No.-0335210502 , Circlip Part No.-0335212402 , Circlip Part No.-0335212700 , Circlip Part No.-0335213000 , Circlip Part No.-0335213200 , Circlip Part No.-0335213202 , Circlip Part No.-0335213600 , Circlip Part No.-0335213700 , Circlip Part No.-0335214000 , Circlip Part No.-0335214100 , Circlip Part No.-0335214200 , Circlip Part No.-0335214300 , Circlip Part No.-0335214600 , Circlip Part No.-0335214700 , Circlip Part No.-0335215100 , Circlip Part No.-0335215200 , Circlip Part No.-0335215400 , Circlip Part No.-0335215500 , Circlip Part No.-0335215800 , Circlip Part No.-0335216200 , Circlip Part No.-0335216500 , Circlip Part No.-0335216600 , Circlip Part No.-0335216900 , Circlip Part No.-0335217100 , Circlip Part No.-0335217300 , Circlip Part No.-0335217600 , Circlip Part No.-0335217800 , Circlip Part No.-0335218000 , Circlip Part No.-0335218200 , Circlip Part No.-0335218400 , Circlip Part No.-0335220400 , Circlip Part No.-0335221700 , Retaining Ring Part No.-0335310800 , Retaining Ri Part No.-0335311000 , Retaining Ri Part No.-0335311300 , Lock Ring Part No.-0335350010 , Lock Ring Part No.-0335350026 , Lock Ring Part No.-0335350132 , Circlip Part No.-0335357600 , Flat Key Part No.-0337000943 , Key Part No.-0337208300 , Key Part No.-0337530500 , Key Part No.-0337723700 , Key Part No.-0337752300 , Flat Key Part No.-0337810700 , Key Part No.-0337820600 , Key Part No.-0337826600 , Flat Key Part No.-0337829500 , Spring Part No.-0339100007 , Ring Spring Part No.-0339100008 , Ring Spring Part No.-0339100010 , Clamping Uni Part No.-0339100021 , Pipe Clamp Part No.-0346022100 , Clamp Part No.-0346100002 , Clamp Part No.-0346100003 , Pipe Clamp Part No.-0346100006 , Clamp Part No.-0346100007 , Pipe Clamp Part No.-0346100017 , Pipe Clamp Part No.-0346100019 , Pipe Clamb Part No.-0346100024 , Pipe Clamp Part No.-0346100029 , Pipe Clamp Part No.-0346100041 , Clamp Part No.-0346100201 , Pipe Clamp Part No.-0346100202 , Clamp Part No.-0346100203 , Clamp Part No.-0346100204 , Clamp Part No.-0346100205 , Pipe Clamp Part No.-0346100209 , Clamp Part No.-0346100241 , Clamp Part No.-0346100242 , Clamp Part No.-0346100243 , Pipe Clamp Part No.-0346100314 , Pipe Clamp Part No.-0346100519 , Pipe Clamp Part No.-0346210500 , Clamp Part No.-0346257100 , Pipe Clamp Part No.-0346290012 , Pipe Clamp Part No.-0346290013 , Pipe Clamp Part No.-0346300010 , Clamp Part No.-0346300055 , Pipe Clamp Part No.-0346300057 , Clamp Halves Part No.-0346300097 , Cover Plate Part No.-0346300217 , Cover Plate Part No.-0346300225 , Clamp Halves Part No.-0346300238 , Clamp Halves Part No.-0346300241 , Clamp Halves Part No.-0346300247 , Cover Plate Part No.-0346300248 , Slangklämma Part No.-0347405217 , Hose Clip Part No.-0347610020 , Hose Clip Part No.-0347610042 , Hose Clip Part No.-0347610052 , Hose Clip Part No.-0347610300 , Hose Clip Part No.-0347610500 , Hose Clip Part No.-0347610600 , Slangklämma Part No.-0347610900 , Slangklämma Part No.-0347611300 , Slangklämma Part No.-0347611400 , Slangklämma Part No.-0347612000 , Ball Joint Part No.-0357100001 , Ball Knob Part No.-0362110900 , Narrow V-Bel Part No.-0367010032 , Narrow V-Bel Part No.-0367010062 , Chain Part No.-0369100009 , Lifting Eye Part No.-0371110002 , Lifting Eye Part No.-0371110003 , Lifting Eye Part No.-0371110006 , Shackle Part No.-0372410010 , Cup Spring Part No.-0384300016 , Cup Spring Part No.-0384300019 , Spring Part No.-0384331200 , Spring Part No.-0384343300 , Disc Spring Part No.-0384350800 , Disk Spring Part No.-0384354600 , Compress.Spr Part No.-0384500027 , Tryckfjader Part No.-0384500029 , Compress.Spr Part No.-0384500045 , Vibr. Damper Part No.-0392110002 , Vibr. Damper Part No.-0392110004 , Vibr.Damper Part No.-0392110010 , Vibr.Damper Part No.-0392110034 , Vibration Da Part No.-0392110043 , Vibr. Damper Part No.-0392110045 , Dämpare Part No.-0392111002 , Vibr. Damper Part No.-0399999905 , Damper Part No.-0399999907 , Damper Part No.-0399999908 , Damper Part No.-0399999909 , Insert Tool Part No.-0462701034 , Flanged Bear Part No.-0500000009 , Glidlager Part No.-0500032400 , Glidlager Part No.-0500129600 , Plain Bearing Part No.-0500420400 , Flange Bearing Part No.-0500450003 , Flange Bearing Part No.-0500450007 , Bushing Part No.-0500450011 , Flange Bearing Part No.-0500450012 , Flange Bearing Part No.-0500450023 , Flange Beari Part No.-0500450033 , Flange Bushi Part No.-0500450060 , Plain Bearing Part No.-0500450082 , Plain Bearing Part No.-0500450091 , Flange Beari Part No.-0500450094 , Flanged Bear Part No.-0500450119 , Bearing Part No.-0500450122 , Flanged Bear Part No.-0500450130 , Flanged Bear Part No.-0500450131 , Bushing Part No.-0500452003 , Bushing Part No.-0500452006 , Bushing Part No.-0500452007 , Bushing Part No.-0500453620 , Bearing,Sp.P Part No.-0501000008 , Ledlager Part No.-0501000009 , Bearing,Sp.Pl. Part No.-0501000016 , Bearing,Sp.Pl. Part No.-0501000017 , Bearing Part No.-0501000028 , Bearing Sp.L Part No.-0501000039 , Bearing Part No.-0501000051 , Bearing Part No.-0501000055 , Bearing Part No.-0501000069 , Bearing,Sp.P Part No.-0501000072 , Bearing Part No.-0501000900 , Bearing Part No.-0501001200 , Bearing Part No.-0501001300 , Bearing,Sp.Pl. Part No.-0501001400 , Bearing Part No.-0501001500 , Bearing,Sp.Pl. Part No.-0501001600 , Bearing Part No.-0501001900 , Bearing Part No.-0501001901 , Bearing Part No.-0501002000 , Bearing Part No.-0501002100 , Bearing,Sp.P Part No.-0501002302 , Bearing Part No.-0501100009 , Rod End Part No.-0501100505 , Rod End Part No.-0501100509 , Ball Bearing Part No.-0502109060 , Ball Bearing Part No.-0502109070 , Ball Bearing Part No.-0502109088 , Ball Bearing Part No.-0502109194 , Ball Bearing Part No.-0502110900 , Ball Bearing Part No.-0502111000 , Kullager Part No.-0502111500 , Kullager Part No.-0502111700 , Ball Bearing Part No.-0502122600 , Ball Bearing Part No.-0502122601 , Ball Bearing Part No.-0502123600 , Ball Bearing Part No.-0502155003 , Ball Bearing Part No.-0502210500 , Roll.Bearing Part No.-0502310500 , Ball Bearing Part No.-0502310700 , Bearing Unit Part No.-0502801016 , Bearing Unit Part No.-0502801017 , Bearing Housing Part No.-0502801021 , Ball Bearing Part No.-0503210900 , Ball Bearing Part No.-0504020015 , Ball Bearing Part No.-0504060001 , Kullager Part No.-0504210400 , Ball Bearing Part No.-0504020013 , Roll.Bearing Part No.-0508110046 , Roller Beari Part No.-0508110103 , Roller Bearing Part No.-0508110139 , Roll.Bearing Part No.-0508230500 , Roll.Bearing Part No.-0508232301 , Roll.Bearing Part No.-0509012102 , Roll.Bearing Part No.-0509012103 , Roll.Bearing Part No.-0509012107 , Roll.Bearing Part No.-0509012111 , Roll.Bearing Part No.-0509012112 , Roller Beari Part No.-0509012129 , Rlr Bearing Part No.-0509012130 , Roller Beari Part No.-0509012131 , Roller Beari Part No.-0509012132 , Roll.Bearing Part No.-0509022100 , Roll.Bearing Part No.-0509022200 , Roll.Bearing Part No.-0509022300 , Roll.Bearing Part No.-0509022800 , Needle Carr. Part No.-0515010007 , Needle Carrier Part No.-0515010011 , Needle Carr. Part No.-0515144500 , Need.Bearing Part No.-0515310007 , Needle Beari Part No.-0515310044 , Need.Bearing Part No.-0516150400 , Need.Bearing Part No.-0516150401 , Need.Bearing Part No.-0516153800 , Need.Bearing Part No.-0516162300 , Needle Beari Part No.-0516400025 , Need.Bearing Part No.-0516404500 , Needle Beari Part No.-0516404700 , Need.Bearing Part No.-0516404900 , Inner Ring Part No.-0516410005 , Inner Ring Part No.-0516410025 , Inner Ring Part No.-0516410026 , Inner Ring Part No.-0516413501 , Inner Ring Part No.-0516413901 , Ball Part No.-0517142000 , Smörjnippel Part No.-0544210600 , Fettnippel Part No.-0544215300 , Grease Nipple Part No.-0544216200 , Smörjnippel Part No.-0544256200 , Threaded Pipe Part No.-0551000093 , Pipe Part No.-0560020018 , Pipe Part No.-0560100303 , Elbow Part No.-0560100603 , Elbow Part No.-0560100900 , Elbow Part No.-0560101003 , Elbow Part No.-0560130403 , Bend Part No.-0560130503 , Elbow Part No.-0560130903 , Pipe Fitting Part No.-0560440095 , Pipe Fitting Part No.-0560440101 , Bend Part No.-0562040012 , Pipe Part No.-0564000048 , Pipe Part No.-0564000058 , T-Pipe Part No.-0564000603 , T-Pipe Part No.-0564000703 , T-Pipe Part No.-0564001003 , T-Pipe Part No.-0564013703 , Sleeve Part No.-0570015101 , Sleeve Part No.-0570015104 , Sleeve Part No.-0570015107 , Sleeve Part No.-0570015112 , Sleeve Part No.-0570015113 , Sleeve Part No.-0570015114 , Sleeve Part No.-0570015115 , Sleeve Part No.-0570015116 , Sleeve Part No.-0570015117 , Pipe Socket Part No.-0570016001 , Pipe Socket Part No.-0570016003 , Sleeve Part No.-0570025007 , Sleeve Part No.-0570025008 , Sleeve Part No.-0570025009 , Sleeve Part No.-0570025010 , Sleeve Part No.-0570025011 , Sleeve Part No.-0570025025 , Sleeve Part No.-0570025026 , Sleeve Part No.-0570025027 , Sleeve Part No.-0570025029 , Sleeve Part No.-0570025030 , Sleeve Part No.-0570025032 , Sleeve Part No.-0570025035 , Sleeve Part No.-0570025036 , Sleeve Part No.-0570025038 , Hose Coupling Part No.-0570025042 , Sleeve Part No.-0570025050 , Sleeve Part No.-0570025051 , Sleeve Part No.-0570025052 , Nipple Part No.-0570500006 , Straight Nipple Part No.-0570500502 , Straight Nipple Part No.-0570500503 , Straight Nipple Part No.-0570500512 , Straight Nipple Part No.-0570500518 , Nipple Part No.-0570501001 , Nipple Part No.-0570501006 , Nipple Part No.-0570501007 , Nipple Part No.-0570501009 , Nipple Part No.-0570501010 , Nipple Part No.-0570501011 , Nipple Part No.-0570501012 , Nipple Part No.-0570501013 , Nipple Part No.-0570501014 , Nipple Part No.-0570501016 , Nipple Part No.-0570501017 , Nipple Part No.-0570501018 , Nipple Part No.-0570501019 , Nipple Part No.-0570501020 , Nipple Part No.-0570501021 , Nipple Part No.-0570501022 , Nipple Part No.-0570501024 , Nippel Part No.-0570501030 , Nippel Part No.-0570501031 , Nippel Part No.-0570501034 , Straight Nipple Part No.-0570501049 , Straight Nipple Part No.-0570501050 , Straight Nipple Part No.-0570501095 , Straight Nipple Part No.-0570501096 , Straight Nipple Part No.-0570501097 , Straight Coupl. Part No.-0570501105 , Straight Coupl. Part No.-0570501106 , Nipple Part No.-0570502007 , Nipple Part No.-0570502008 , Nipple Part No.-0570504002 , Nipple Part No.-0570504003 , Nipple Part No.-0570504004 , Nipple Part No.-0570504005 , Nipple Part No.-0570504006 , Nipple Part No.-0570504007 , Straight Nipple Part No.-0570504015 , Nipple Part No.-0570504105 , Nipple Part No.-0570504106 , Nipple Part No.-0570508005 , Nipple Part No.-0570509001 , Nipple Part No.-0570509002 , Nipple Part No.-0570509003 , Nipple Part No.-0570509004 , Nipple Part No.-0570509008 , Nipple Part No.-0570509012 , Nipple Part No.-0570509013 , Nipple Part No.-0570509014 , Nipple Part No.-0570509015 , Nipple Part No.-0570509016 , Nipple Part No.-0570509018 , Nipple Part No.-0570509019 , Nipple Part No.-0570509020 , Nipple Part No.-0570509021 , Nipple Part No.-0570509023 , Nipple Part No.-0570509025 , Nipple Part No.-0570509026 , Nipple Part No.-0570509027 , Nipple Part No.-0570509028 , Nipple Part No.-0570509030 , Nipple Part No.-0570509033 , Nipple Part No.-0570509034 , Nipple Part No.-0570509045 , Nipple Part No.-0570511001 , Nipple Part No.-0570511003 , Nipple Part No.-0570512001 , Nipple Part No.-0570512003 , Nipple Part No.-0570512004 , Nipple Part No.-0570512005 , Nipple Part No.-0570512010 , Nipple Part No.-0570516005 , Adapter Sleeve Part No.-0570519002 , Adapter Sleeve Part No.-0570519003 , Adapter Sleeve Part No.-0570519004 , Adapter Sleeve Part No.-0570519005 , Adapter Sleeve Part No.-0570519006 , Adapter Sleeve Part No.-0570519007 , Adapter Sleeve Part No.-0570519008 , Test Connect Part No.-0570519105 , Test Connection Part No.-0570519106 , Test Connection Part No.-0570519107 , Test Connection Part No.-0570519108 , Test Connect Part No.-0570519109 , Test Connect Part No.-0570519110 , Straight Nipple Part No.-0570700006 , Nipple Part No.-0570700007 , Cap Part No.-0570700008 , Cap Part No.-0570700009 , Cap Part No.-0570700010 , Cap Part No.-0570700011 , Cap Part No.-0570700019 , Cap Part No.-0570700033 , Joint Nipple Part No.-0570700104 , Nipple Part No.-0570700901 , Nipple Part No.-0570700905 , Elbow Nipple Part No.-0570700906 , Swivel Elbow Part No.-0570700908 , Swivel Elbow Part No.-0570700910 , Nipple Part No.-0570700913 , Swivel Elbow Part No.-0570700914 , Swivel Elbow Part No.-0570700915 , Nipple Part No.-0570700918 , Swivel Part No.-0570700919 , Swivel Part No.-0570700921 , Swivel Elbow Part No.-0570700922 , Nipple Part No.-0570700925 , Swivel Part No.-0570700926 , Nipple Part No.-0570700928 , Nipple Part No.-0570701715 , Rak Nippel Part No.-0570702503 , Nipple Part No.-0570702507 , Nipple Part No.-0570702508 , Nipple Part No.-0570702509 , Nipple Part No.-0570702510 , Nipple Part No.-0570702511 , Nipple Part No.-0570702516 , Nipple Part No.-0570702518 , Nipple Part No.-0570702519 , Nipple Part No.-0570702520 , Nipple Part No.-0570702521 , Nipple Part No.-0570702522 , Nipple Part No.-0570702523 , Nipple Part No.-0570702524 , Nipple Part No.-0570702525 , Nipple Part No.-0570702529 , Nipple Part No.-0570702531 , Nipple Part No.-0570702534 , Nipple Part No.-0570702535 , Straight Nipple Part No.-0570702540 , Nipple Part No.-0570702541 , Nipple Part No.-0570702544 , Straight Nipple Part No.-0570703309 , Nipple Part No.-0570704107 , Elbow Nipple Part No.-0570704113 , Elbow Nipple Part No.-0570704114 , Elbow Nipple Part No.-0570704115 , Elbow Nipple Part No.-0570704116 , Elbow Nipple Part No.-0570704117 , Elbow Nipple Part No.-0570704118 , Elbow Nipple Part No.-0570704119 , Elbow Nipple Part No.-0570704121 , Elbow Nipple Part No.-0570704124 , Nipple Part No.-0570704125 , Elbow Nipple Part No.-0570704126 , Elbow Nipple Part No.-0570704127 , Nipple Part No.-0570704129 , Nipple Part No.-0570704132 , Elbow Nipple Part No.-0570704135 , Elbow Nipple Part No.-0570704136 , Elbow Nipple Part No.-0570704137 , Elbow Nipple Part No.-0570704146 , T-Nipple Part No.-0570704902 , T-Nipple Part No.-0570704903 , T-Nipple Part No.-0570704908 , Reducing Bushin Part No.-0570705701 , Reducing Bus Part No.-0570705705 , Reducing Bus Part No.-0570705707 , Reducing Bushin Part No.-0570705710 , Reducing Bushin Part No.-0570705712 , Reducing Bus Part No.-0570705713 , Nut Part No.-0570706503 , Test Connection Part No.-0570706510 , Test Connection Part No.-0570706519 , Test Connection Part No.-0570706522 , Adapter Part No.-0570707307 , Coupling Part No.-0570710004 , Slangkopplin Part No.-0570710008 , Slangkopplin Part No.-0570710009 , Slangkopplin Part No.-0570710010 , Slangkopplin Part No.-0570710011 , Slangkopplin Part No.-0570710012 , Slangkopplin Part No.-0570710013 , Slangkopplin Part No.-0570710016 , Slangkopplin Part No.-0570710017 , Slangkopplin Part No.-0570710018 , Slangkopplin Part No.-0570710019 , Slangkopplin Part No.-0570710020 , Slangkopplin Part No.-0570710021 , Hose Nipple Part No.-0571002062 , Quick Coupli Part No.-0571017002 , Slangledning Part No.-0574000010 , Slangledning Part No.-0574000016 , Slangledning Part No.-0574000021 , Slangledning Part No.-0574000023 , Slangledning Part No.-0574000039 , Hydraulic Ho Part No.-0574000074 , Slangledning Part No.-0574000097 , Slangledning Part No.-0574006307 , Slangledning Part No.-0574006378 , Hyd. Hose Part No.-0574006389 , Slangledning Part No.-0574006406 , Slangledning Part No.-0574006450 , Slangledning Part No.-0574006454 , Slangledning Part No.-0574006463 , Hydraulic Ho Part No.-0574006468 , Slangledning Part No.-0574006471 , Hydr. Hose Part No.-0574006496 , Slangledning Part No.-0574006497 , Hydr. Hose Part No.-0574006513 , Hydraulic Ho Part No.-0574006517 , Hydr. Hose Part No.-0574006541 , Slangledning Part No.-0574006542 , Hydr. Hose Part No.-0574006544 , Hyd. Hose Part No.-0574006563 , Hydr. Hose Part No.-0574006566 , Hydr. Hose Part No.-0574006571 , Slangledning Part No.-0574006588 , Slangledning Part No.-0574006591 , Slangledning Part No.-0574006596 , Hydr. Hose Part No.-0574006621 , Hydr. Hose Part No.-0574006622 , Slangledning Part No.-0574006629 , Hydr. Hose Part No.-0574006707 , Hydr. Hose Part No.-0574006857 , Slangledning Part No.-0574025311 , Slangledning Part No.-0574025511 , Slangledning Part No.-0574025611 , Slangledning Part No.-0574026011 , Slangledning Part No.-0574027811 , Slangledning Part No.-0574031411 , Slangledning Part No.-0574031711 , Slangledning Part No.-0574032011 , Slangledning Part No.-0574032311 , Slangledning Part No.-0574032811 , Slangledning Part No.-0574125411 , Slangledning Part No.-0574126011 , Slangledning Part No.-0574126211 , Slangledning Part No.-0574127211 , Slangledning Part No.-0574127511 , Slangledning Part No.-0574127611 , Slangledning Part No.-0574127711 , Slangledning Part No.-0574128111 , Slangledning Part No.-0574128311 , Slangledning Part No.-0574128511 , Slangledning Part No.-0574128611 , Slangledning Part No.-0574129711 , Slangledning Part No.-0574131611 , Slangledning Part No.-0574132111 , Slangledning Part No.-0574156315 , Slangledning Part No.-0574204372 , Slangledning Part No.-0574204378 , Slangledning Part No.-0574225334 , Slangledning Part No.-0574225511 , Slangledning Part No.-0574225518 , Slangledning Part No.-0574226911 , Slangledning Part No.-0574227311 , Slangledning Part No.-0574227611 , Slangledning Part No.-0574228011 , Slangledning Part No.-0574228311 , Slangledning Part No.-0574228411 , Slangledning Part No.-0574228511 , Slangledning Part No.-0574228611 , Slangledning Part No.-0574228811 , Hydraulich Part No.-0574229411 , Slangledning Part No.-0574231411 , Slangledning Part No.-0574232611 , Slangledning Part No.-0574253711 , Hydraulic Ho Part No.-0574325711 , Slangledning Part No.-0574326111 , Slangledning Part No.-0574326311 , Slangledning Part No.-0574326411 , Hydraulic Ho Part No.-0574326811 , Slangledning Part No.-0574328311 , Slangledning Part No.-0574328511 , Slangledning Part No.-0574328611 , Slangledning Part No.-0574328711 , Slangledning Part No.-0574329511 , Slangledning Part No.-0574333111 , Slangledning Part No.-0574333211 , Slangledning Part No.-0574333411 , Slangledning Part No.-0574351511 , Slangledning Part No.-0574353411 , Hydraulic Ho Part No.-0574426311 , Slangledning Part No.-0574453611 , Hydraulic Ho Part No.-0574454011 , Slangledning Part No.-0574601311 , Slangledning Part No.-0574601911 , Slangledning Part No.-0574780272 , Pipe Coupl. Part No.-0580000200 , Pipe Coupl. Part No.-0580001311 , Pipe Couplin Part No.-0580001350 , Pipe Couplin Part No.-0580001490 , Pipe Couplin Part No.-0580020133 , Pipe Coupl. Part No.-0580040400 , Pipe Coupl. Part No.-0580140200 , Coupling Part No.-0580200200 , Coupling Part No.-0580201407 , Pipe Coupl. Part No.-0580220200 , Pipe Coupl. Part No.-0580223701 , Pipe Couplin Part No.-0580240200 , Pipe Couplin Part No.-0580250105 , Pipe Couplin Part No.-0580250144 , Pipe Couplin Part No.-0580250146 , Pipe Couplin Part No.-0580250147 , Pipe Couplin Part No.-0580250149 , Coupling Part No.-0580460200 , Coupling Part No.-0580840014 , Koppling Part No.-0580840017 , Pipe Couplin Part No.-0581000076 , Sleeve Part No.-0581202512 , Coupling Part No.-0582000700 , Cutting Ring Part No.-0584000400 , Cutting Ring Part No.-0584002400 , Cutting Ring Part No.-0584002500 , Cutting Ring Part No.-0584002700 , Cutting Ring Part No.-0584006200 , Cutting Ring Part No.-0584006600 , Cutting Ring Part No.-0584006700 , Cutting Ring Part No.-0584006800 , Cutting Ring Part No.-0584007100 , Nut Part No.-0584200400 , Nut Part No.-0584202200 , Nut Part No.-0584202400 , Nut Part No.-0584202500 , Nut Part No.-0584202600 , Nut Part No.-0584202700 , Nut Part No.-0584206200 , Nut Part No.-0584206500 , Nut Part No.-0584206600 , Nut Part No.-0584206700 , Nut Part No.-0584206800 , Nut Part No.-0584207400 , Hexagon Nipple Part No.-0603410803 , Sexkantsnipp Part No.-0603420029 , Hexagon Nipple Part No.-0603422500 , Hexagon Nipple Part No.-0603510600 , Hexagon Nipple Part No.-0603512500 , Bushing Part No.-0605830100 , Bushing Part No.-0605830403 , Bushing Part No.-0605850500 , Bushing Part No.-0605850900 , Bushing Part No.-0605851200 , Bushing Part No.-0605851403 , Bushing Part No.-0605852500 , Bushing Part No.-0605852703 , Bushing Part No.-0605853403 , Bushing Part No.-0605853603 , Bushing Part No.-0605870070 , Bushing Part No.-0605871100 , Bushing Part No.-0605880500 , Bushing Part No.-0605880906 , Bushing Part No.-0605881400 , Bushing Part No.-0605881406 , Bushing Part No.-0605881600 , Bushing Part No.-0605883205 , Bushing Part No.-0605883500 , Straight Ada Part No.-0606000001 , Rormuff Part No.-0607110080 , Socket Part No.-0607110503 , Pressure Screw Part No.-0627420006 , Press.Screw Part No.-0627420303 , Pressure Screw Part No.-0627420900 , Pressure Scr Part No.-0627420903 , Thrust Screw Part No.-0627421700 , Pressure Screw Part No.-0627422403 , Pressure Scr Part No.-0627510005 , Press.Screw Part No.-0627511000 , Banjo Connec Part No.-0627850061 , Flange Part No.-0633330700 , Flange Part No.-0633330900 , Flange Half Part No.-0638050002 , Flange Part No.-0638050033 , Flange Half Part No.-0638051500 , Flange Half Part No.-0638052100 , Flange Half Part No.-0638052700 , Flange Half Part No.-0638054500 , Flange Half Part No.-0638054700 , Flange Half Part No.-0638056500 , Flange Half Part No.-0638057100 , Gasket Part No.-0650010114 , Gasket Part No.-0650100118 , Gasket Part No.-0653050068 , Gasket Part No.-0653090506 , Gasket Part No.-0653090511 , Gasket Part No.-0653100300 , Gasket Part No.-0653102600 , Gasket Part No.-0653103300 , Gasket Part No.-0653104100 , Gasket Part No.-0653105500 , Gasket Part No.-0653105700 , Gasket Part No.-0653107000 , Gasket Part No.-0653107600 , Gasket Part No.-0653110000 , Gasket Part No.-0653110100 , Packning Part No.-0653111500 , Gasket Part No.-0653112400 , Gasket Part No.-0653112800 , Gasket Part No.-0653113100 , Gasket Part No.-0653116200 , Gasket Part No.-0653116300 , Gasket Part No.-0653117400 , Gasket Part No.-0653119500 , Gasket Part No.-0653903800 , Gasket Part No.-0657570300 , Seal Washer Part No.-0661100013 , Seal Washer Part No.-0661100500 , Seal Washer Part No.-0661101200 , Seal Washer Part No.-0661101400 , Seal Ring Part No.-0661101500 , Seal Washer Part No.-0661101600 , Sealring Part No.-0661100500 , Seal Washer Part No.-0661102000 , Bondedseal 3/8 Part No.-0661102600 , Seal Washer Part No.-0661103000 , Seal Washer Part No.-0661103300 , Seal Washer Part No.-0661103400 , Seal Washer Part No.-0661103800 , Seal Washer Part No.-0661104900 , Seal Washer Part No.-0661105400 , Seal Washer Part No.-0661105600 , Seal Washer Part No.-0661106200 , Seal Washer Part No.-0661107000 , Ring Part No.-0661150018 , Ring Part No.-0661150036 , Back-Up Ring Part No.-0661150037 , Back-Up Ring Part No.-0661150038 , Back-Up Ring Part No.-0661150044 , Back-Up Ring Part No.-0661150046 , Back-Up Ring Part No.-0661150047 , Back-Up Ring Part No.-0661150049 , Back-Up Ring Part No.-0661150050 , Back-Up Ring Part No.-0661150065 , Back-Up Ring Part No.-0661150066 , Back-Up Ring Part No.-0661150067 , Back-Up Ring Part No.-0661150068 , Back-Up Ring Part No.-0661150069 , Back-Up Ring Part No.-0661150076 , Back-Up Ring Part No.-0661150077 , Back-Up Ring Part No.-0661150095 , Back-Up Ring Part No.-0661150300 , Back-Up Ring Part No.-0661151000 , Back-Up Ring Part No.-0661151200 , Back-Up Ring Part No.-0661151400 , Back-Up Ring Part No.-0661152000 , Back-Up Ring Part No.-0661152600 , Back-Up Ring Part No.-0661152700 , Back-Up Ring Part No.-0661153000 , Back-Up Ring Part No.-0661153600 , Back-Up Ring Part No.-0661153900 , Back-Up Ring Part No.-0661154000 , Back-Up Ring Part No.-0661154700 , Back-Up Ring Part No.-0661156800 , Back-Up Ring Part No.-0661201400 , O-Ring Part No.-0663210026 , O.Ring Part No.-0663210030 , O-Ring Part No.-0663210053 , O-Ring Part No.-0663210054 , O-Ring Part No.-0663210055 , O-Ring Part No.-0663210058 , O-Ring Part No.-0663210061 , O-Ring Part No.-0663210062 , O-Ring Part No.-0663210063 , O-Ring Part No.-0663210075 , O-Ring Part No.-0663210081 , O-Ring Part No.-0663210086 , O-Ring Part No.-0663210109 , O-Ring Part No.-0663210115 , O-Ring Part No.-0663210150 , O-Ring Part No.-0663210158 , O-Ring Part No.-0663210166 , O-Ring Part No.-0663210167 , O-Ring Part No.-0663210168 , O-Ring Part No.-0663210171 , O-Ring Part No.-0663210178 , O-Ring Part No.-0663210180 , O-Ring Part No.-0663210186 , O-Ring Part No.-0663210209 , O-Ring Part No.-0663210215 , O-Ring Part No.-0663210217 , O-Ring Part No.-0663210266 , O-Ring Part No.-0663210306 , O-Ring Part No.-0663210332 , O-Ring Part No.-0663210356 , O-Ring Part No.-0663210358 , O-Ring Part No.-0663210360 , O-Ring Part No.-0663210363 , O-Ring Part No.-0663210364 , O-Ring Part No.-0663210367 , O-Ring Part No.-0663210372 , O-Ring Part No.-0663210390 , O-Ring Part No.-0663210392 , O-Ring Part No.-0663210430 , O-Ring Part No.-0663210431 , O-Ring Part No.-0663210464 , O-Ring Part No.-0663210494 , O-Ring Part No.-0663210531 , O-Ring Part No.-0663210543 , O-Ring Part No.-0663210558 , O-Ring Part No.-0663210559 , O-Ring Part No.-0663210560 , O-Ring Part No.-0663210576 , O-Ring Part No.-0663210577 , O-Ring Part No.-0663210596 , O-Ring D=179 Part No.-0663210600 , O-Ring Part No.-0663210633 , O-Ring Part No.-0663210661 , O-Ring Part No.-0663210662 , O-Ring Part No.-0663210665 , O-Ring Part No.-0663210666 , O-Ring Part No.-0663210750 , O-Ring Part No.-0663210799 , O-Ring Part No.-0663210846 , O-Ring Part No.-0663210877 , O-Ring Part No.-0663210897 , O-Ring Part No.-0663210914 , O-Ring Part No.-0663210917 , O-Ring Part No.-0663210936 , O-Ring Part No.-0663210937 , O-Ring Part No.-0663210971 , O-Ring Part No.-0663210979 , O-Ring Part No.-0663210989 , O-Ring Part No.-0663211000 , O-Ring Part No.-0663211064 , O-Ring Part No.-0663211121 , O-Ring Part No.-0663211131 , O-Ring Part No.-0663211190 , O-Ring Part No.-0663211223 , O-Ring Part No.-0663211262 , O-Ring Part No.-0663211344 , O-Ring Part No.-0663211345 , O-Ring Part No.-0663211346 , O-Ring Part No.-0663211367 , O-Ring Part No.-0663211368 , O-Ring Part No.-0663211400 , O-Ring Part No.-0663211493 , O-Ring Part No.-0663211500 , O-Ring Part No.-0663211600 , O-Ring Part No.-0663211801 , O-Ring Part No.-0663211900 , O-Ring Part No.-0663212000 , O-Ring Part No.-0663212101 , O-Ring Part No.-0663212200 , O-Ring Part No.-0663212700 , O-Ring Part No.-0663212800 , O-Ring Part No.-0663212901 , O-Ring Part No.-0663213100 , O-Ring Part No.-0663213300 , O-Ring Part No.-0663213301 , O-Ring Part No.-0663213400 , O-Ring Part No.-0663213500 , O-Ring Part No.-0663213501 , O-Ring Part No.-0663213800 , O-Ring Part No.-0663214000 , O-Ring Part No.-0663214200 , O-Ring Part No.-0663214300 , O-Ring Part No.-0663214400 , O-Ring Part No.-0663214501 , O-Ring Part No.-0663214600 , O-Ring Part No.-0663214700 , O-Ring Part No.-0663214701 , O-Ring Part No.-0663215000 , O-Ring Part No.-0663215200 , O-Ring Part No.-0663215400 , O-Ring Part No.-0663215500 , O-Ring Part No.-0663215800 , O-Ring Part No.-0663216300 , O-Ring Part No.-0663311700 , O-Ring Part No.-0663312000 , O-Ring Part No.-0663312700 , O-Ring Part No.-0663314000 , O-Ring Part No.-0663314300 , O-Ring Part No.-0663611500 , O-Ring Part No.-0663612100 , O-Ring Part No.-0663612300 , O-Ring Part No.-0663612400 , O-Ring Part No.-0663612700 , O-Ring Part No.-0663613400 , O-Ring Part No.-0663613401 , O-Ring Part No.-0663613500 , O-Ring Part No.-0663613501 , O-Ring Part No.-0663613600 , O-Ring Part No.-0663613800 , O-Ring Part No.-0663613900 , O-Ring Part No.-0663614001 , O-Ring Part No.-0663614100 , O-Ring Part No.-0663614200 , O-Ring Part No.-0663614300 , O-Ring Part No.-0663614400 , O-Ring Part No.-0663614600 , O-Ring Part No.-0663614701 , O-Ring Part No.-0663614900 , O-Ring Part No.-0663615100 , O-Ring Part No.-0663615300 , O-Ring Part No.-0663615500 , O-Ring Part No.-0663616000 , O-Ring Part No.-0663616200 , O-Ring Part No.-0663616600 , O-Ring Part No.-0663616700 , O-Ring Part No.-0663617100 , O-Ring Part No.-0663713400 , O-Ring Part No.-0663713700 , O-Ring Part No.-0663714200 , O-Ring Part No.-0663714500 , O-Ring Part No.-0663714800 , O-Ring Part No.-0663716200 , O-Ring Part No.-0663903201 , O-Ring Part No.-0663903900 , O-Ring Part No.-0663904500 , O-Ring Part No.-0663905001 , O-Ring Part No.-0663905101 , O-Ring Part No.-0663905501 , O-Ring Part No.-0663905600 , O-Ring Part No.-0663907601 , O-Ring Part No.-0663907800 , O-Ring Part No.-0663907801 , O-Ring Part No.-0663909600 , O-Ring Part No.-0663909900 , O-Ring Part No.-0663910400 , O-Ring Part No.-0663910401 , O-Ring Part No.-0663910700 , O-Ring Part No.-0663911200 , O-Ring Part No.-0663911400 , O-Ring Part No.-0663911801 , O-Ring Part No.-0663913200 , O-Ring Part No.-0663915001 , O-Ring Part No.-0663915800 , O-Ring Part No.-0663916900 , O-Ring Part No.-0663917500 , O-Ring Part No.-0663917600 , O-Ring Part No.-0663918201 , O-Ring Part No.-0663919001 , O-Ring Part No.-0663919101 , O-Ring Part No.-0663919500 , O-Ring Part No.-0663919600 , O-Ring Part No.-0663919701 , O-Ring Part No.-0663920200 , O-Ring Part No.-0663920300 , O-Ring Part No.-0663920500 , O-Ring Part No.-0663922500 , O-Ring Part No.-0663937501 , O-Ring Part No.-0663939301 , O-Ring Part No.-0663982200 , O-Ring Part No.-0663987400 , Seal Ring Part No.-0665001012 , Sealring Part No.-0665001016 , Kolvstångstätn. Part No.-0665001018 , Kolvstångstätn. Part No.-0665001023 , Piston Seal Part No.-0665002016 , Kolvtätning Part No.-0665002018 , Piston Seal Part No.-0665002022 , Kolvtätning Part No.-0665002030 , Kolvstångstätn. Part No.-0665003004 , Piston Seal Part No.-0665070025 , Seal Part No.-0665070026 , Sealing Part No.-0665070045 , Piston Rod Seal Part No.-0665070069 , Piston Seal Part No.-0665070140 , Piston Seal Part No.-0665080014 , Seal Part No.-0665080017 , Kolvtätning Part No.-0665080021 , Kolvtätning Part No.-0665080034 , Seal Ring Part No.-0665090014 , Seal Part No.-0665100012 , Seal Part No.-0665100016 , Seal Part No.-0665100017 , Seal Part No.-0665100040 , Seal Part No.-0665100046 , Sealing Part No.-0665100068 , Cup Seal Part No.-0665100072 , Gasket Part No.-0665700111 , Wiper Part No.-0665909913 , Wiper Part No.-0665909914 , Wiper Part No.-0665909929 , Wiper Part No.-0665909933 , Wiper Part No.-0665910013 , Wiper Part No.-0665910014 , Avstrykare Part No.-0665910016 , Avstrykare Part No.-0665910017 , Wiper Part No.-0665910086 , Wiper Part No.-0665910088 , Scal Ring Part No.-0665911000 , Avstrykare Part No.-0665911701 , Avstrykare Part No.-0665917000 , Avstrykare Part No.-0665917001 , Avstrykare Part No.-0665918100 , Avstrykare Part No.-0665921400 , Avstrykare Part No.-0665921800 , Wiper Part No.-0665922400 , Wiper Part No.-0665923200 , Wiper Part No.-0665923201 , Wiper Part No.-0665925801 , Wiper Part No.-0665926200 , Guide Ring Part No.-0665930034 , Guide Ring Part No.-0665930046 , Guide Ring Part No.-0665930064 , Guide Ring Part No.-0665930065 , Guide Ring Part No.-0665930066 , Guide Ring Part No.-0665930067 , Guide Ring Part No.-0665930086 , Seal Ring Part No.-0666200034 , Seal Ring Part No.-0666220700 , Radial Lip S Part No.-0666232900 , Seal Ring Part No.-0666262200 , Radial Lip Seal Part No.-0666425100 , Radialtätning Part No.-0666470400 , Rad.Lip Seal Part No.-0666600010 , Radialtätning Part No.-0666600019 , Rad.Lip Seal Part No.-0666600025 , Rad.Lip Seal Part No.-0666600030 , Radial Seal Part No.-0666600037 , Lip Seal Part No.-0666600039 , Radial Lip S Part No.-0666600048 , Radial Lip S Part No.-0666600056 , Radial Lip S Part No.-0666600059 , Radialtatnin Part No.-0666600063 , Seal Part No.-0666600064 , Radial Lip S Part No.-0666600066 , Radial Lip S Part No.-0666600067 , Radial Lip S Part No.-0666600071 , Radial Lip S Part No.-0666627100 , Rad.Lip Seal Part No.-0666630200 , Rad.Lip Seal Part No.-0666633700 , Seal Ring Part No.-0666643900 , Radial Lip Seal Part No.-0666651800 , Seal Part No.-0666664500 , Rad.Lip Seal Part No.-0666671800 , Rad.Lip Seal Part No.-0666715501 , Radial Lip Seal Part No.-0666718400 , Rad.Lip Seal Part No.-0666718801 , Rad.Lip Seal Part No.-0666719001 , Axial Seal Part No.-0666800010 , Axial Seal Part No.-0666800013 , V-Ring Part No.-0666800017 , Sealring Part No.-0666800023 , Axial Seal Part No.-0666800024 , Axial Seal Part No.-0666800025 , Axial Seal Part No.-0666800026 , Seal, Axial Part No.-0666800027 , Axial Seal Part No.-0666800034 , Axial Seal Part No.-0666800104 , Axial Seal Part No.-0666800704 , Seal Ring Part No.-0666803400 , Axial Seal Part No.-0666804901 , Axial Seal Part No.-0666809201 , Axial Seal Part No.-0666809602 , Axial Seal Part No.-0666809603 , Axial Seal Part No.-0666809702 , Axial Seal Part No.-0666810011 , Seal Part No.-0666810017 , Seal Part No.-0666810053 , Seal Ring Part No.-0666810055 , Seal Ring Part No.-0667114800 , Seal Part No.-0667120600 , Seal Part No.-0667127200 , Seal Ring Part No.-0667411100 , Pistonring Part No.-0680420500 , Piston Ring Part No.-0681521100 , Plug Part No.-0686310300 , Plug Part No.-0686311601 , Plug Part No.-0686370300 , Plug Part No.-0686370600 , Plug Part No.-0686370900 , Plug Part No.-0686371000 , Plug Part No.-0686371200 , Plug Part No.-0686371602 , Plug Part No.-0686371606 , Plug Part No.-0686371607 , Plug Part No.-0686371629 , Plug Part No.-0686371802 , Plug Part No.-0686371803 , Plug Part No.-0686420103 , Plug Part No.-0686420400 , Hexagon Plug Part No.-0686423019 , Hexagon Plug Part No.-0686425500 , Plug Part No.-0686610100 , Plug Part No.-0686644200 , Plug Part No.-0686644203 , Plug Part No.-0686644207 , Plug Part No.-0686644403 , Plug Part No.-0686644704 , Protecting Plug Part No.-0686901054 , Protection Plug Part No.-0686911000 , Plug Part No.-0686925004 , Cap Part No.-0686925022 , Plug Part No.-0686925026 , Plug Part No.-0686925027 , Cap Part No.-0686925028 , Cap Part No.-0686925029 , Cap Part No.-0686925060 , Cap Part No.-0686925061 , Cap Part No.-0686925062 , Cap Part No.-0686925063 , Protec.Cap Part No.-0686925064 , Protec.Cap Part No.-0686925065 , Protection Cap Part No.-0686925227 , Cap Part No.-0687310800 , Plate Part No.-0690111600 , Plate Part No.-0690318100 , Wire Marker Part No.-0694499000 , Cable Lug Part No.-0694511016 , Cable Lug Part No.-0694511017 , Cable Lug Part No.-0694511021 , Cable Lug Part No.-0694511022 , Cable Lug Part No.-0694511026 , Cable Lug Part No.-0694511027 , Cable Lug Part No.-0694511030 , Cable Lug Part No.-0694511031 , Flat Pin Sleeve Part No.-0694528501 , Cable Lug Part No.-0694550500 , Cable Lug Part No.-0694550800 , Cable Lug Part No.-0694551100 , Kabelsko Part No.-0694552000 , Cable Lug Part No.-0694553200 , Cable Lug Part No.-0694553500 , Kabelsko Part No.-0694553800 , Kabelsko Part No.-0694554000 , Kabelsko Part No.-0694554200 , Kabelsko Part No.-0694560001 , Reducer Part No.-0697974528 , Adapter Part No.-0697974531 , Adapter Part No.-0697974544 , Enlarger Part No.-0697974563 , Adapter Part No.-0697974566 , Reducer Part No.-0697974571 , Reducer Part No.-0697974572 , Reducer Part No.-0697974576 , Enlarger Part No.-0697974579 , Enlarger Part No.-0697974580 , Låsmutter Part No.-0697980913 , Låsmutter Part No.-0697980914 , Lock Nut Part No.-0697980915 , Låsmutter Part No.-0697980916 , Lock Nut Part No.-0697980917 , Lock Nut Part No.-0697980918 , Avslutn.Propp Part No.-0697981018 , Avslutn.Propp Part No.-0697981019 , End Plug Part No.-0697981020 , End Plug Part No.-0697981021 , End Plug Part No.-0697981022 , End Plug Part No.-0697981054 , Cable Gland Part No.-0698514006 , Kabelförskruvn. Part No.-0698514008 , Kabelförskruvn. Part No.-0698514014 , Cable Gland Part No.-0698514059 , Cable Gland Part No.-0698514060 , Cable Gland Part No.-0698514061 , Cable Gland Part No.-0698514062 , Cable Gland Part No.-0698514063 , Cable Gland Part No.-0698514064 , Cable Gland Part No.-0698514065 , Cable Gland Part No.-0698514066 , Cable Gland Part No.-0698514091 , Cable Gland Part No.-0698514092 , Cable Gland Part No.-0698514113 , Cable Gland Part No.-0698514140 , Cable Gland Part No.-0698514141 , Cable Gland Part No.-0698514162 , Cable Gland Part No.-0698514170 , Cable Gland Part No.-0698514171 , Cable Seal Part No.-0698514808 , Cable Str.-Way Part No.-0698514809 , Cable Str.-Way Part No.-0698514820 , Box Part No.-0698521100 , Adapter Part No.-0698612608 , Märkhylsa Part No.-0699100000 , Märkhylsa Part No.-0699100100 , Märkhylsa Part No.-0699100300 , Märkhylsa Part No.-0699100400 , Märkhylsa Part No.-0699100500 , Märkhylsa Part No.-0699100600 , Märkhylsa Part No.-0699100700 , Märkhylsa Part No.-0699100800 , Märkhylsa Part No.-0699100900 , Märkhylsa Part No.-0699121300 , Märkhylsa Part No.-0699123100 , Märkhylsa Part No.-0699123200 , Märkhylsa Part No.-0699123300 , Märkhylsa Part No.-0699123700 , Filter Plug Part No.-0803501204 , Hand Pump Part No.-0805000001 , Check Valve Part No.-0823005016 , Check Valve Part No.-0823005017 , Check Valve Part No.-0823005018 , Check Valve Part No.-0823005019 , Check Valve Part No.-0823005020 , Check Valve Part No.-0823005021 , Check Valve Part No.-0823005022 , Check Valve Part No.-0823005023 , Check Valve Part No.-0823005024 , Check Valve Part No.-0823009006 , Check Valve Part No.-0823009007 , Check Valve Part No.-0823009013 , Valve Part No.-0830100767 , Safety Valve Part No.-0830100768 , Safety Valve Part No.-0830100776 , Safety Valve Part No.-0830100844 , Safety Valve Part No.-0834119405 , Safty Valve Part No.-0834119406 , Manometer Part No.-0872100024 , Gauge Part No.-0872100041 , Pressure Gauge Part No.-0872100095 , Control Valve Part No.-1011351080 , El-Motor Part No.-1080234009 , Motor 5,5Kw Part No.-1080288590 , El.Motor Part No.-1080288591 , Circuit Brea Part No.-1081042055 , Kabelsko Part No.-1088000109 , Cable Lug Part No.-1088000124 , Flat Pin Sleeve Part No.-1088000301 , Cable Lug Part No.-1088000304 , Flat Pin Sleeve Part No.-1088000306 , Flatstiftshylsa Part No.-1088000307 , Flat Pin Sleeve Part No.-1088000409 , Kabelsko Part No.-1088018001 , Enlarger Part No.-1088025415 , Gasket Part No.-1088049805 , Assembly Strip Part No.-1088130101 , Bulb Part No.-1089028901 , Solenoid Part No.-1089035161 , Pressure Swi Part No.-1089038953 , Press.Switch Part No.-1089039742 , Soleniod Val Part No.-1089062117 , Fuse Part No.-1089903710 , Contact Block Part No.-1089962205 , Outlet Sect. Part No.-1261050044 , Pr.Red.Valve Part No.-1261100004 , Plug Part No.-1261100005 , End Piece Se Part No.-1261100006 , Spring Set Part No.-5731505487 , Connector Part No.-1261100010 , Sealing Set Part No.-1261100013 , Assy Set Part No.-1261100030 , Sealing Set Part No.-1261100031 , Seal Kit Part No.-1261100057 , Guard Part No.-1503007500 , Damper Part No.-1503020300 , Seal Part No.-1503023400 , Safety Valve Part No.-1503126702 , Silencer Part No.-1503217500 , Cover Part No.-1503246100 , Seal Cord Part No.-1503246700 , Inlet Silenc Part No.-1503285700 , Housing Part No.-1503286000 , Couling Fan Part No.-1503289200 , Valve Kit Part No.-1503580060 , Pr.Rel.Valve Part No.-1503617660 , Pressure Val Part No.-1513040081 , Valve Part No.-1604707982 , Gasket Part No.-1613133027 , Thermostate Part No.-1613688303 , Spring Part No.-1613900400 , Check Valve Part No.-1613900501 , Scavenge Lin Part No.-1613900610 , Gasket Part No.-1613901000 , Lever Gauge Part No.-1613902000 , Pulley Part No.-1613903103 , Lock Part No.-1616494600 , Termostat Part No.-1619733300 , Termostat Part No.-1622706402 , Air Receiver Part No.-2235159800 , Coupling Part No.-2235410313 , Clamp Part No.-2235550152 , Bearing Ring Part No.-2653232294 , Eccentric Lock Part No.-2653232369 , Drain Hose Part No.-2653232492 , Seal Part No.-2653232534 , Sealing Plug Part No.-2653232567 , Plug Part No.-2653232583 , Clip,Retainer Part No.-2658384249 , O-Ring Part No.-2801146430 , Seal Part No.-2807192355 , Seal Part No.-2807192405 , Oi Sep. Kit Part No.-2901000401 , Oil Separato Part No.-2901034301 , Separator Part No.-2901052300 , Oil Sep. Kit Part No.-2901077901 , Repair Kit Part No.-2910301900 , Service Pak Part No.-2912430605 , Serv.Pak 100 Part No.-2912430706 , Spherical Be Part No.-3030049400 , Seal Kit Part No.-3030064590 , Check Valve Part No.-3030067180 , Seal Kit Part No.-3030073390 , Boom/Swing C Part No.-3030076380 , Relief Valve Part No.-3030076780 , Restrictor N Part No.-3030082500 , Parallel Cyl Part No.-3030077700 , Parallel Cyl Part No.-3030077800 , Basket Cylin Part No.-3030077900 , Basket Bolt Part No.-3030078100 , Working Sect Part No.-3030078502 , M.Rel.Valve Part No.-3030078581 , Sep.S.Valve Part No.-3030078582 , Seal Kit Ret Part No.-3030078583 , Anti Load Ch Part No.-3030078586 , Seal Kit Spo Part No.-3217983446 , Seal Kit Part No.-3030078592 , Seal Kit Part No.-3030078594 , Spacer Part No.-3030080500 , Spacer Part No.-3030080600 , Glide Plate Part No.-3030084200 , Shim Plates Part No.-3030084400 , Glide Plate Part No.-3030084500 , Glide Plate Part No.-3030084600 , Shim Plates Part No.-3030085100 , Overc.Valve Part No.-3030091480 , Seal Kit Part No.-3030097590 , Instr. Plate Part No.-3030102700 , Distance Part No.-3030106200 , Valve Part No.-3030122400 , Bult Part No.-3030143500 , Seal Kit Part No.-3030143890 , Seal Kit Part No.-3030144290 , Swivel Part No.-3030146200 , Basket Servi Part No.-3030151400 , Styrplatta Part No.-3030154000 , Styrplatta Part No.-3030154100 , Glide Plate Part No.-3030157200 , Bearing Plat Part No.-3030157300 , Bearing Plat Part No.-3030157400 , Bearing Pla Part No.-3030157500 , Seal Kit Part No.-3030169190 , Basket Part No.-3030179200 , Direct.Valve Part No.-3035331295 , Aux. Contact Part No.-3035331373 , Overload Pro Part No.-3035331454 , Control Box Part No.-3035332351 , Relay Part No.-3035332387 , Extractor Part No.-3091045590 , Hydraulic Ho Part No.-3115000003 , Strap Part No.-3115021200 , Diaphragm Part No.-3115025900 , Valve Part No.-3115026200 , Stop Ring Part No.-3115026800 , Washer Part No.-3115027300 , Gear Wheel Part No.-3115027400 , Coupling Part No.-3115027700 , Side Bolt Part No.-3115028500 , Dome Nut Part No.-3115028600 , Piston Part No.-3115028800 , Shim Part No.-3115029701 , Shim Part No.-3115029702 , Shim Part No.-3115029703 , Shim Set 0,1 Part No.-3115029790 , Mandrel Part No.-3115031200 , Mandrel Part No.-3115031300 , Mandrel Part No.-3115031400 , Extender Part No.-3115031800 , Gasket Part No.-3115032700 , Key Adaptor Part No.-3115034300 , Key Adapter Part No.-3115034400 , Socket Part No.-3115064400 , Driver Part No.-3115071100 , Gear Wheel Part No.-3115080400 , Shaft Part No.-3115082100 , Shaft Compl. Part No.-3115082180 , Shaft Compl. Part No.-3115082181 , Washer Part No.-3115082300 , Sleeve Part No.-3115082400 , Drain Plug Part No.-3115083924 , Sealing Set Part No.-3115083990 , Seal Kit Part No.-3115083991 , Sealing Set Part No.-3115084400 , Sealing Set Part No.-3115084500 , Sleeve Part No.-3115096700 , Seal Kit Part No.-3115097000 , Bushing Part No.-3115097100 , Spring Ring Part No.-3115101074 , Mandrel Part No.-3115101900 , Seal Set Part No.-3115102600 , O-Ring Set Part No.-3115103291 , Cylinder Part No.-3115104700 , Bearing Part No.-3115104800 , Gear Housing Part No.-3115105080 , Bearing Part No.-3115105500 , Gear Wheel Part No.-3115105600 , Hydr.Motor Part No.-3115105884 , Sealing Set Part No.-3115105892 , Sealing Set Part No.-3115106500 , Gasket Part No.-3115107000 , Mandrel Part No.-3115109400 , Plate Part No.-3115109700 , Tool Part No.-3115110000 , Tool Part No.-3115110100 , Mandrel Part No.-3115111300 , Assembl.Tool Part No.-3115112600 , Assembly Tool Part No.-3115112700 , Seal Kit Part No.-3115115600 , Stud Part No.-3115116500 , Bushingcom Part No.-3115120690 , Lock Wire Part No.-3115120800 , Restriction Part No.-3115122600 , Flush.Tube Part No.-3115126700 , Front Head Part No.-3115131880 , Retainer Part No.-3115132000 , Ch.Bushing Part No.-3115132290 , Diaphragm Part No.-3115132400 , Bearing Part No.-3115134000 , Damp.Piston Part No.-3115135300 , Spring Part No.-3115135400 , Stop Ring Part No.-3115143400 , Kit Cop 1238 Part No.-3115143690 , Side Bolt Part No.-3115145700 , Connec.Piece Part No.-3115145800 , Nipple Part No.-3115145900 , Plug Part No.-3115146000 , Front Head Part No.-3115146280 , Retainer Part No.-3115146300 , Stop Ring Part No.-3115146600 , Press Ring Part No.-3115146800 , Rot Chuck Part No.-3115146900 , Driver Part No.-3115147000 , Seal Part No.-3115147600 , Sealing Set Part No.-3115147690 , Front Head Part No.-3115155580 , Driver Part No.-3115158200 , Mandrel Part No.-3115160300 , Nipple Set Part No.-3115160391 , Pulse Unit Part No.-3115160802 , Arm Part No.-3115161100 , Assembl.Tool Part No.-3115162700 , Valve Cover Part No.-3115163600 , Valve Plung Part No.-3115163800 , Cartridge Part No.-3115164800 , Coil Part No.-3115164801 , Seal Kit Part No.-3115164802 , Seal Kit Part No.-3115164803 , Coupling Part No.-3115165300 , Piston Guide Part No.-3115167101 , Piston Guide Part No.-3115167200 , Piston Guide Part No.-3115168001 , Coupling Part No.-3115168400 , Seal Kit Part No.-3115169090 , Overhaul Kit Part No.-3115169091 , Seal Kit Part No.-3115169093 , Overhaul Kit Part No.-3115169094 , Seal Washer Part No.-3115169500 , Seal Washer Part No.-3115169700 , Rot.Chuck Part No.-3115173281 , Nozzle Part No.-3115174606 , End Piece Part No.-3115175500 , Filler Part No.-3115182180 , Diaphragm Part No.-3115182201 , Valve Piston Part No.-3115182300 , Plug Part No.-3115182500 , Piston Guide Part No.-3115183300 , Side Bolt Part No.-3115183600 , Protection Plug Part No.-3115187000 , Assembl.Tool Part No.-3115187700 , Sealing Set Part No.-3115187890 , Seal Kit Part No.-3115187900 , Seal Kit Part No.-3115188000 , Seal Kit Part No.-3115188090 , Assemb.Plate Part No.-3115189700 , Assy.Plate Part No.-3115189800 , Mandrel Part No.-3115189900 , Mandrel Part No.-3115190300 , Diaphragm Part No.-3115192602 , Connect. Plate Part No.-3115515200 , Rotat.Chuck Part No.-3115201480 , Conn. Plate Part No.-3115201901 , Gear Wheel Part No.-3115202200 , Guide Part No.-3115202300 , Driver Part No.-3115203100 , Piston Guide Part No.-3115203500 , Ring Part No.-3115204101 , Stud Part No.-3115204500 , Bushing Part No.-3115204600 , Lock Ring Part No.-3115205100 , Seal Housing Part No.-3115205200 , Sealing Set Part No.-3115205300 , Sealing Set Part No.-3115205400 , Sealing Set Part No.-3115205500 , Driver Part No.-3115206500 , Sealing Set Part No.-3115207290 , Sealing Set Part No.-3115207490 , Valve Cover Part No.-3115207604 , Valve Cover Part No.-3115207605 , Valve Cover Part No.-3115207703 , Valve Cover Part No.-3115207704 , Valve Cover Part No.-3115207705 , Flush.Head Part No.-3115207900 , Spacer Ring Part No.-3115209100 , Valve Seat Part No.-3115209900 , Valve Cone Part No.-3115210000 , Side Bolt Part No.-3115211301 , Conn. Plate Part No.-3115211400 , Sealing Set Part No.-3115211600 , Guide Part No.-3115211800 , Repair Set Part No.-3115211890 , Guide Part No.-3115211900 , Repair Set Part No.-3115211990 , Flush. Head Part No.-3115212000 , Flush. Head Part No.-3115212100 , Stop Ring Part No.-3115212200 , Stop Ring Part No.-3115212380 , Piston Guide Part No.-3115212400 , Piston Part No.-3115212600 , Piston Part No.-3115212900 , Piston Kit Part No.-3115212990 , Spacer Ring Part No.-3115214700 , Stud Part No.-3115214800 , Stud Part No.-3115214900 , Sealing Set Part No.-3115215000 , Check Valve Part No.-3115215300 , Mandrel Part No.-3115216300 , Ass.Fixture Part No.-3115216880 , Check Valve Part No.-3115219681 , Stud Part No.-3115222100 , Side Bolt Part No.-3115222200 , Guide Part No.-3115222302 , Pressing Too Part No.-3115222880 , Drill Collar Part No.-3115223100 , Drill Collar Part No.-3115223200 , Drill Collar Part No.-3115223300 , Exten.Tool Part No.-3115224700 , Press Tool Part No.-3115225000 , Press Tool Part No.-3115225100 , Press Tool Part No.-3115225200 , Press Tool Part No.-3115225300 , Press Tool Part No.-3115225600 , Press Tool Part No.-3115225800 , Mandrel Part No.-3115226200 , Flush Head Part No.-3115227301 , Clamp Part No.-3115227500 , Holder Part No.-3115227580 , Drill Collar Part No.-3115227900 , Flush.Head Part No.-3115229600 , Flush. Head Part No.-3115229700 , Flush.Head Part No.-3115231500 , Gear Housing Part No.-3115234080 , Piston Guide Part No.-3115236200 , Drill Collar Part No.-3115236300 , Seal Part No.-3115237200 , Extr.Piston Part No.-3115237300 , Socket Part No.-3115237900 , Tube Cover Part No.-3115238000 , Valve Cone Part No.-3115238300 , Valve Seat Part No.-3115238400 , Cup Seal Part No.-3115238500 , Cup Seal Part No.-3115238600 , Mandrel Part No.-3115239300 , Plug Part No.-3115240100 , Press.Tool Part No.-3115241000 , Press.Tool Part No.-3115241100 , Guide Ring Part No.-3115242300 , Flush. Head Part No.-3115242700 , Stop Ring Part No.-3115242800 , Cover, Compl Part No.-3115242980 , Rot.Chuck Part No.-3115243100 , Piston Part No.-3115243300 , Seal Housing Part No.-3115243580 , O-Ring Part No.-3115245002 , Side Bolt Part No.-3115245500 , Side Bolt Part No.-3115245600 , Cup Seal Part No.-3115246200 , Guide Part No.-3115246300 , Valve Cover Part No.-3115246800 , Diaphragm Part No.-3115247200 , Tight. Tool Part No.-3115251900 , Shim 0,10 Part No.-3115254101 , Shim 0,15 Part No.-3115254102 , Shim 0,50 Part No.-3115254103 , Guide Part No.-3115254500 , Interm.Shaft Part No.-3115254700 , Shaft Part No.-3115254800 , Gear Wheel Part No.-3115255100 , Bushing Part No.-3115255200 , Sealing Set Part No.-3115255400 , Sealing Set Part No.-3115255900 , Intermed. Part Part No.-3115258345 , Interm. Compl. Part No.-3115258381 , Diaphr.Supp. Part No.-3115259500 , Seal Housing Part No.-3115259780 , Tube Part No.-3115261520 , Accumulator Part No.-3115261590 , Plug Part No.-3115261710 , Plug Part No.-3115261720 , End Piece Part No.-3115261800 , Guide Part No.-3115262000 , Piston Guide Part No.-3115262600 , Extend.Piece Part No.-3115264800 , Rot.Chuck Part No.-3115264980 , Driver Part No.-3115265000 , Side Bolt Part No.-3115265200 , Side Bolt Part No.-3115265300 , Cup Seal Part No.-3115269300 , Screw Part No.-3115270210 , Accumulator Part No.-3115270480 , Accumulator Part No.-3115270880 , Sealing Set Part No.-3115272100 , Disass.Tools Part No.-3115272480 , Mandrel Part No.-3115273700 , Mandrel Part No.-3115273900 , Guide Sleeve Part No.-3115274200 , Lock Ring Part No.-3115274500 , Cup Seal Part No.-3115274600 , Seal Housing Part No.-3115276080 , Seal Housecomp Part No.-3115276680 , Seal Housing Part No.-3115277180 , Seal Housecom Part No.-3115277280 , Seal Housing Part No.-3115277380 , Seal Kit Part No.-3115279000 , Seal Kit Part No.-3115281300 , Piston Part No.-3115282300 , Seal Housing Part No.-3115282780 , Damp.Piston Part No.-3115283100 , Regulat. Pin Part No.-3115283200 , Piston Part No.-3115283800 , Valve Piston Part No.-3115284800 , Assembl.Tool Part No.-3115285980 , Seal Set Part No.-3115286900 , Front Part C Part No.-3115287181 , Front Part C Part No.-3115287183 , Extr.Piston Part No.-3115287300 , Cover, Compl Part No.-3115287480 , Damp. Piston Part No.-3115288300 , Pipe Part No.-3115288600 , Connect. Plate Part No.-3115288780 , Pressure Screw Part No.-3115288800 , Pressure Scr Part No.-3115288900 , Overhaul Kit Part No.-3115290001 , Sealing Kit Part No.-3115290002 , Accumulator Part No.-3115290080 , Diaphr.Supp Part No.-3115290100 , Spring Part No.-3115290300 , Driver Part No.-3115291100 , Front Part Part No.-3115292700 , Seal Kit Part No.-3115293800 , Anvil Part No.-3115294002 , Ventilator Part No.-3115294500 , Drill Collar Part No.-3115294700 , Cover Compl. Part No.-3115294981 , Front Part Part No.-3115295000 , Front Head C Part No.-3115295080 , Front Head C Part No.-3115295081 , Front Head Part No.-3115295083 , Front Head Comp Part No.-3115295085 , Extr. Piston Part No.-3115296400 , Guide Part No.-3115296500 , Seal Kit Part No.-3115296600 , Gear Housing Part No.-3115296780 , Rot.Ch.Bushi Part No.-3115600488 , Seal Kit Part No.-3115296900 , Damp.Piston Part No.-3115297100 , Seal Housing Part No.-3115297280 , Piston Guide Part No.-3115297500 , Seal Housing Part No.-3115297680 , Sela Kit Part No.-3115297800 , Piston Part No.-3115298101 , Seal Ring Part No.-3115298800 , Stop Ring Part No.-3115299000 , Mandrel Part No.-3115300400 , Seal Ring Part No.-3115300500 , Tool Set Part No.-3115301597 , Front Head Part No.-3115301810 , Guide Part No.-3115301901 , Stop Ring Part No.-3115302001 , Distans/Spac Part No.-3115302101 , Flushing Hea Part No.-3115302201 , Side Bolt Part No.-3115302301 , Wiper Part No.-3115302400 , Front Part C Part No.-3115303280 , Cover Compl. Part No.-3115303380 , Cover Compl. Part No.-3115304080 , Cup Seal Part No.-3115304400 , Seal Retaine Part No.-3115304600 , Attachment Part No.-3115304700 , Seal Ring Part No.-3115304800 , Stud Part No.-3115304900 , Dome Nut Part No.-3115305000 , Stud Part No.-3115305200 , Valve Cover Part No.-3115305300 , Valve Cover Part No.-3115305400 , Stud Part No.-3115305500 , Stud Part No.-3115305600 , Dowel Part No.-3115306100 , Sleeve Part No.-3115306400 , Drill Collar Part No.-3115306500 , Sleeve Part No.-3115307200 , Stud Part No.-3115307300 , Stud Part No.-3115307400 , Stud Part No.-3115307500 , Spacer Part No.-3115307600 , Coupling Part No.-3115307700 , Seal Kit Part No.-3115308000 , Seal Retain Part No.-3115308100 , Bushing Part No.-3115308700 , Piston Part No.-3115309101 , Piston Guide Part No.-3115309300 , Piston Guide Part No.-3115309400 , Piston Part No.-3115309600 , Gear Wheel Part No.-3115310300 , Valve Piston Part No.-3115311100 , Damp.Piston Part No.-3115311500 , Nozzle D 1,7 Part No.-3115312200 , Seal Housec Part No.-3115314080 , Connection Part No.-3115314700 , Valve Piston Part No.-3115314800 , Connect. Pla Part No.-3115314900 , Stop Ring Part No.-3115315800 , Extr. Piston Part No.-3115316500 , Piston Part No.-3115317000 , Piston Part No.-3115317100 , Guide Sleeve Part No.-3115317800 , Mandrel Part No.-3115318200 , Fixture Part No.-3115318300 , Cup Seal Part No.-3115318400 , Wiper Part No.-3115318500 , Flushing Hea Part No.-3115319080 , Flush Head C Part No.-3115319081 , Cover Part No.-3115319100 , Spacer Part No.-3115319200 , Side Bolt Part No.-3115319300 , Stud Part No.-3115319400 , Guide Part No.-3115319600 , Guide Part No.-3115319603 , Guide Part No.-3115319700 , Guide Part No.-3115319703 , Wiper Part No.-3115319800 , Seal Retaine Part No.-3115319900 , Guide Plate Part No.-3115320200 , Pressing Too Part No.-3115320300 , Assembly Too Part No.-3115320400 , Connection P Part No.-3115320910 , Nut Part No.-3115321400 , Seal Ring Part No.-3115321900 , Reg. Plug Part No.-3115322300 , Seal Kit Part No.-3115322690 , Mutter Part No.-3115322700 , Grouting Uni Part No.-3115323000 , Sealing Kit Part No.-3115323090 , Attachment Part No.-3115323200 , Pin Part No.-3115323400 , Wiper Part No.-3115323600 , Cylinder Sle Part No.-3115323801 , Stoppring/St Part No.-3115323901 , Bushing Part No.-3115324300 , Piston Part No.-3115324400 , Seal Ring Part No.-3115324500 , Front Part Part No.-3115324600 , Front Part C Part No.-3115324680 , Front Part C Part No.-3115324682 , Front Part Comp Part No.-3115324682 , Cylinder Part No.-3115324800 , Guide Part No.-3115325100 , Seal Ring Ho Part No.-3115325200 , Stop Washer Part No.-3115325400 , Stop Ring Part No.-3115325500 , Flushing Ada Part No.-3115325600 , Bushing Part No.-3115325700 , Liner Part No.-3115325800 , Damping Piston Part No.-3115325901 , Back Up Ring Part No.-3115326100 , Rot.Chuck Part No.-3115326200 , Cover Part No.-3115326300 , Driver Part No.-3115326400 , Driver Part No.-3115326401 , Back Up Ring Part No.-3115326500 , Gear Wheel Part No.-3115326600 , Valve Seat Part No.-3115326900 , Liner Part No.-3115327000 , Seal Housing Part No.-3115327200 , Guide Housin Part No.-3115327300 , Piston Guide Part No.-3115327400 , Seal Housing Part No.-3115327500 , Piston Part No.-3115327601 , Valve Piston Part No.-3115327700 , Valve Cover Part No.-3115600275 , Valve Cover Part No.-3115600277 , Wear Plug Part No.-3115328000 , Side Bolt Part No.-3115328100 , Wiper Part No.-3115328201 , Wiper Part No.-3115328202 , Cup Seal Part No.-3115328301 , Seal Kit Part No.-3115328401 , Seal Kit Part No.-3115328402 , Seal Kit Part No.-3115328602 , Seal Kit Part No.-3115328605 , Wiper Part No.-3115328802 , Wiper Part No.-3115328805 , Seal Ring Part No.-3115328901 , Seal Ring Part No.-3115328902 , Seal Ring Part No.-3115328905 , Seal Ring Part No.-3115328906 , Seal Ring Part No.-3115328907 , Seal Ring Part No.-3115328909 , Seal Ring Part No.-3115328910 , Seal Ring Part No.-3115328911 , Seal Ring 324 13 Part No.-3115328913 , Seal Ring Part No.-3115328917 , Seal Ring 322 13 Part No.-3115328923 , Seal Ring Part No.-3115329002 , Seal Ring 342 13 Part No.-3115329018 , Guide Part No.-3115329400 , Flushing Hea Part No.-3115329580 , Guide Part No.-3115329700 , Guide Part No.-3115329800 , Set Of Seals Part No.-3115331300 , Set Of Seals Part No.-3115331400 , Dome Nut Part No.-3115331500 , Stud Part No.-3115331800 , Stud Part No.-3115331900 , Stud Part No.-3115332000 , Dome Nut Part No.-3115332200 , Rot.Chuck,Co Part No.-3115332480 , Flush Head C Part No.-3115332580 , Guide Part No.-3115332600 , Stop Ring Part No.-3115332701 , Driver Part No.-3115333000 , Piston Guide Part No.-3115336200 , Cup Seal Part No.-3115336300 , Cup Seal Part No.-3115336500 , Guide Part No.-3115336800 , Flushing Head Part No.-3115337001 , Stop Washer Part No.-3115337100 , Stop Ring Part No.-3115337200 , Cop Grease, Part No.-3115342300 , Bottle Conne Part No.-3115342502 , Charging Hose Part No.-3115342503 , Manometer Part No.-3115342504 , Manometer Part No.-3115342505 , Manometer Part No.-3115342506 , Regulator Part No.-3115342507 , Needle Valve Part No.-3115342508 , Connection Part No.-3115342510 , Piston Part No.-3115342600 , Piston Part No.-3115342700 , Driver Part No.-3115343100 , Rot.Chuck,Co Part No.-3115343280 , Gear Housing Part No.-3115343400 , Seal Retaine Part No.-3115343601 , Shaft Part No.-3115343900 , Damping Pist Part No.-3115344100 , Guide Part No.-3115344200 , Flushing Hea Part No.-3115344300 , Connection P Part No.-3115344410 , Flushing Hea Part No.-3115344800 , Flushing Ada Part No.-3115344900 , Cover Cpl Part No.-3115345080 , Conn.Plate Part No.-3115345500 , Holder Plate Part No.-3115345700 , Hydraulic Motor Part No.-3115347380 , Hydraulic Mo Part No.-3115347382 , Hydraulic Motor Part No.-3115347383 , Hydraulmotor Part No.-3115347384 , Hydraulic Motor Part No.-3115347385 , Hydraulic Mo Part No.-3115347386 , Seal Kit Part No.-3115347390 , Liner Part No.-3115347400 , Liner Part No.-3115348800 , Mandrel Part No.-3115349000 , Guide Ring Part No.-3115349300 , Mandrel Part No.-3115349400 , Damping Pist Part No.-3115349700 , Hydraulmotor Part No.-3115350482 , Seal Kit Part No.-3115350599 , Hydraulic Mo Part No.-3115350781 , Hydraulmotor Part No.-3115350782 , Hydraulmotor Part No.-3115350783 , Hydraulmotor Part No.-3115350784 , Seal Kit Part No.-3115350790 , Guide Part No.-3115350800 , Guide Part No.-3115351500 , Bushing Part No.-3115351700 , Guide Part No.-3115351800 , Flushing Hea Part No.-3115351900 , Retaining Ring Part No.-3115352000 , Wrench Adapt Part No.-3115352100 , Cover Compl. Part No.-3115352480 , Seal Retaine Part No.-3115352800 , Hydraulic Mo Part No.-3115352983 , Seal Kit Part No.-3115353700 , Hydraulmotor Part No.-3115354381 , Seal Kit Part No.-3115354390 , Kolv Part No.-3115354400 , Seal Kit Part No.-3115354500 , Mutter/Nut Part No.-3115354800 , Rotation Chu Part No.-3115355000 , Frontdel Part No.-3115355400 , Shims 0,50 Part No.-3115355903 , Diaphragm Part No.-3115357200 , Piston Guide Part No.-3115357400 , Seal Kit Part No.-3115359000 , Stop Ring Part No.-3115359200 , Diaphragm Part No.-3115359300 , Accumulat. Assy Part No.-3115359481 , Hydraulic Motor Part No.-3115566983 , Hydraulic Motor Part No.-3115566981 , Piston Part No.-3115360000 , Seal Housing Part No.-3115360180 , Seal Kit Part No.-3115360200 , Piston Guide Part No.-3115360301 , Flush Hose Part No.-3115360500 , Spacer Part No.-3115361000 , Side Bolt Part No.-3115361100 , Stud Part No.-3115361200 , Stud Part No.-3115361300 , Guide Piston Part No.-3115361900 , Piston Guide Part No.-3115362000 , Motor Bracke Part No.-3115362100 , Stop Ring Part No.-3115362200 , Rot.Chuck,Co Part No.-3115362380 , Flushing Tub Part No.-3115362500 , Piston Part No.-3115363504 , Gear Housing Part No.-3115371100 , Bushing Part No.-3115374400 , Valve Part No.-3115376800 , Extractor 45 65 Part No.-3115380400 , Seal Kit Part No.-3115500019 , Seal Kit Part No.-3115500020 , Piston Guide Part No.-3115500139 , Seal Kit Part No.-3115502300 , Gear Housingv Part No.-3115503581 , Cover Part No.-3115503610 , Cover Compl. L Part No.-3115503680 , Side Bolt Part No.-3115504000 , Front Part Part No.-3115504200 , Front Part Comp Part No.-3115504280 , Conversion Kit Part No.-3115504293 , Flushing Head Part No.-3115504405 , Flushing Head Part No.-3115504410 , Guide Part No.-3115504501 , Guide Part No.-3115504511 , Guide Part No.-3115504521 , Spacer 118 12 Part No.-3115505910 , Seal Ring Part No.-3115514601 , Pipe,Compl. Part No.-3115520580 , Front Part Part No.-3115520700 , Front Part Comp Part No.-3115520780 , Rotation Chu Part No.-3115522380 , Driver Part No.-3115522600 , Rot.Chuck Part No.-3115522700 , Assembly Tool Part No.-3115525180 , Disassemb.Tools Part No.-3115525500 , Interm. Comp Part No.-3115527480 , Seal Housec Part No.-3115527580 , Rot.Chuck, Part No.-3115531380 , Conversionk Part No.-3115531390 , Driver 260 13 Part No.-3115531400 , Stop Ring Part No.-3115534090 , Disk Spring 326 13 Part No.-3115536000 , Turning Device Part No.-3115545280 , Washer Part No.-3115555800 , Conversion Kit Part No.-3115561693 , Hydraulic Mo Part No.-3115566982 , Cup Seal Part No.-3115571800 , Screw 33 51 Part No.-3115581203 , Screw 33 53 Part No.-3115581204 , Screw 33 55 Part No.-3115581205 , Screw 33 57 Part No.-3115581207 , Seal Kit Part No.-3115901163 , Seal Kit Part No.-3115901164 , Rebuilding S Part No.-3115901165 , Seal Kit Part No.-3115901390 , O-Ring Set Part No.-3115915093 , Seal Kit1238 Part No.-3115915095 , Seal Kit Part No.-3115915096 , Seal Kit Part No.-3115915097 , Seal Kit Part No.-3115915099 , Seal Kit Part No.-3115915191 , Overhaul Kit Part No.-3115915192 , O-Ring Set Part No.-3115915390 , Seal Kit Part No.-3115915392 , Overhaul Kit Part No.-3115915393 , Seal Kit Part No.-3115915395 , Overhaul Kit Part No.-3115915399 , Seal Kit Part No.-3115915491 , Seal Kit Part No.-3115915492 , Overhaul Kit Part No.-3115915498 , O-Ring Set Part No.-3115915590 , Overhaul Kit Part No.-3115915592 , Seal Kit Part No.-3115915595 , O-Ring Set Part No.-3115915691 , Seal Kit Part No.-3115915693 , Seal Kit Part No.-3115915694 , Seal Kit Part No.-3115915791 , Overhaul Kit Part No.-3115915792 , Seal Kit Part No.-3115915890 , Overhaul Kit Part No.-3115915891 , Seal Kit Part No.-3115915893 , Overhaul Kit Part No.-3115915894 , Overhaul Kit Part No.-3115915991 , Overhaul Kit Part No.-3115915994 , Seal Kit Part No.-3115916091 , Seal Set Part No.-3115916190 , Seal Kit Part No.-3115916290 , Overhaul Kit Part No.-3115916292 , Seal Kit Part No.-3115916390 , Seal Kit Part No.-3115916490 , Overhaul Kit Part No.-3115916491 , Overhaul Kit Part No.-3115916493 , Seal Kit Part No.-3115916590 , Seal Kit Part No.-3115916790 , Overhaul Kit Part No.-3115916791 , Seal Kit Part No.-3115916890 , Overhaul Kit Part No.-3115916891 , Overhaul Kit Part No.-3115916893 , Seal Kit Part No.-3115916995 , Overhaul Kit Part No.-3115916996 , Overhaul Kit Part No.-3115916997 , O-Ring S Part No.-3115917090 , Seal Kit T Part No.-3115917091 , Overhaul Kit Part No.-3115923890 , Overhaul Kit Part No.-3115923891 , Repair Kit Part No.-3115923892 , Overhaul Kit Part No.-3115923893 , Overhaulkit R Part No.-3115923894 , Overhaul Kit Part No.-3115924090 , Seal Kit Part No.-3115926290 , Repair Kit Part No.-3115926291 , Repair Kit Part No.-3115926292 , Seal Kit Part No.-3115926390 , Repair Kit Part No.-3115926391 , Repair Kit Part No.-3115926392 , Seal Kit Part No.-3115926690 , Seal Kit Part No.-3115936090 , Sealkit Part No.-3115936092 , Seal Kit Part No.-3115946090 , Gummiring Part No.-3122030900 , Dowel Part No.-3125063400 , Yoke Part No.-3125063700 , Valve Coil Part No.-3125090600 , Valve Unit Part No.-3125090690 , Valve Unit Part No.-3125090691 , Valve Unit Part No.-3125090692 , Compress.Spring Part No.-3125090700 , Wire Rope Part No.-3125101003 , Exp.Shaft Part No.-3125197480 , Exp.Shaft Part No.-3125197980 , Exp.Axel Part No.-3125198180 , Exp.Shaft Part No.-3125198181 , Axel Part No.-3125198200 , Exp.Axel Part No.-3125198280 , Exp.Shaft Part No.-3125198380 , Tube Part No.-3125199600 , Pipe Part No.-3125199700 , Hose Protection Part No.-3125199780 , Distansring Part No.-3125200200 , Distansring Part No.-3125200500 , Connec.Block Part No.-3125204500 , Tube Part No.-3125204900 , Bushing Part No.-3125217700 , Bushing Part No.-3125217800 , Bushing Part No.-3125217900 , Spring Part No.-3125228900 , Bearing Housing Part No.-3125238800 , Collec.Block Part No.-3125252500 , Ring Part No.-3125268203 , Pr.Rel.Valve Part No.-3125279403 , Restriction Part No.-3125279702 , Seal Kit Part No.-3125298190 , W.Out P.Set Part No.-3125298290 , Attachment Part No.-3125304400 , Joint Nipple Part No.-3125305400 , Exp.Shaft Part No.-3125307180 , Exp.Shaft Part No.-3125307181 , Bushing Part No.-3125307200 , Spacer Part No.-3125307300 , Bushing Part No.-3125307500 , Exp.Shaft Part No.-3125307780 , Bushing Part No.-3125307800 , Bolt Part No.-3125307900 , Skyltsats Part No.-3125318890 , Bushing Part No.-3125484900 , Cover Part No.-3125485000 , Boom Support Part No.-3125485582 , Extension Tube Part No.-3125487301 , Bearing Hous Part No.-3125488903 , Bearing Hous Part No.-3125488983 , Key Part No.-3125492190 , Mellanlägg Part No.-3125492400 , Nippel Part No.-3125493200 , Bushing Part No.-3125493700 , Exp.Axel Part No.-3125493780 , Bushing Part No.-3125494000 , Cover Part No.-3125494100 , Bearing Hous Part No.-3125494403 , Bearing Hous Part No.-3125494486 , Exp.Shaft Part No.-3125494680 , Joint Nipple Part No.-3125495000 , Exp.Shaft Part No.-3125495280 , Bushing Part No.-3125495300 , Bricka Part No.-3125496300 , Bushing Part No.-3125496400 , Bushing Part No.-3125496500 , Exp.Axel Part No.-3125496880 , Bushing Part No.-3125496900 , Ring Part No.-3125497400 , Cradle Part No.-3125497601 , Housing Part No.-3125502800 , Ring Part No.-3125502900 , Spacer Part No.-3125503000 , Piston Part No.-3125503100 , Shaft Part No.-3125503700 , Restriction Part No.-3125535000 , Pr.Rel.Valve Part No.-3125566200 , Seal Kit Part No.-3125566280 , Seal Kit Part No.-3125566281 , Gasket Set Part No.-3125900390 , Check Valve Part No.-3125900400 , Check Valve Part No.-3125900401 , Check Valve Part No.-3125900403 , Direct.Valve Part No.-3125900502 , Bushing Part No.-3128000300 , Bushing Part No.-3128000900 , Dowel Part No.-3128001502 , Rubber Cloth Part No.-3128001717 , Cover Plate Part No.-3128001759 , Cover Plate Part No.-3128001762 , Attachment Part No.-3128001802 , Attachment Part No.-3128001815 , Front Plate Part No.-3128001860 , Flexible Pip Part No.-3128001891 , Bracket Part No.-3128001895 , Packning Part No.-3128001996 , Seal Set Part No.-6060015351 , Distance Pla Part No.-3128003009 , Protect. Cov Part No.-3128003019 , Guide Spindl Part No.-3128003076 , Dowel Part No.-3128003100 , Plunge Part No.-3128003101 , Shaft Part No.-3128003113 , Bearing Hous Part No.-3128003114 , Bearing Hous Part No.-3128003115 , Spacer Ring Part No.-3128003116 , Shaft Part No.-3128003117 , Cover Part No.-3128003118 , Skydd Part No.-3128003119 , Clamp Part No.-3128003136 , Expanding Sh Part No.-3128003155 , Segment Part No.-3128003239 , Segment Part No.-3128003243 , Segment Part No.-3128003255 , Slide Bar Part No.-3128003401 , Slide Bar Part No.-3128003405 , Slide Bar Part No.-3128003406 , Damper Part No.-3128003700 , Holder Part No.-3128008200 , Holder Part No.-3128008300 , Dowel Part No.-3128009000 , Rubber Cloth Part No.-3128009400 , Protect.Coil Part No.-3128022400 , Protect.Coil Part No.-3128022500 , Protect.Coil Part No.-3128022501 , Protect.Coil Part No.-3128022800 , Protect.Coil Part No.-3128022801 , Attachment Part No.-3128024400 , Attachment Part No.-3128025102 , Cyl.Protect. Part No.-3128025110 , Cyl.Protect. Part No.-3128026900 , Cyl.Protect. Part No.-3128027501 , Cyl.Protect. Part No.-3128027502 , Chain Part No.-3128028700 , Angle Plate Part No.-3128028901 , Chain Part No.-3128028902 , Ring Pin Part No.-3128028903 , Chain Part No.-3128028904 , Chain Part No.-3128028905 , Chain Part No.-3128028907 , Planet Carrier Part No.-3128038900 , Cradle Part No.-3128041007 , Cradle Part No.-3128041008 , Cradle Part No.-3128041038 , Tube Part No.-3128042700 , Guide Strip Part No.-3128042802 , Holder Part No.-3128042900 , Gliding Pce Part No.-3128043000 , Shim Part No.-3128043200 , Bushing Part No.-3128044600 , Slide Bar Part No.-3128045801 , Slide Bar Part No.-3128045802 , Slide Bar Part No.-3128045804 , Slide Bar Part No.-3128045807 , Slide Bar Part No.-3128045810 , Slide Bar Part No.-3128045815 , Slide Bar Part No.-3128045818 , Slide Bar Part No.-3128045824 , Slide Bar Part No.-3128045868 , Guide Ring Part No.-3128046300 , Gear Wheel Part No.-3128046400 , Protect.Coil Part No.-3128046800 , Flange Part No.-3128047200 , Bricka Part No.-3128047600 , Washer Part No.-3128047800 , Spacer Part No.-3128047900 , Pin Part No.-3128048000 , Bricka Part No.-3128048200 , Bearing Washer Part No.-3128048300 , Plåt Part No.-3128048500 , Pipe Part No.-3128048600 , Gear Ring Part No.-3128048800 , Seal Part No.-3128048806 , Spacer Part No.-3128049000 , Spacer Part No.-3128049100 , Spacer Part No.-3128049200 , Sleeve Part No.-3128049401 , Cover Part No.-3128049700 , Shaft Part No.-3128051800 , Cover Part No.-3128052500 , Shim Part No.-3128052600 , Return Rope Part No.-3128055101 , Guide Part No.-3128055301 , Wear Plate Part No.-3128055400 , Wear Plate Part No.-3128055401 , Wear Plate Part No.-3128055402 , Guide List Part No.-3128055500 , Guide List Part No.-3128055600 , Guide Part No.-3128055601 , Shim Part No.-3128055700 , Shim Part No.-3128055800 , Cap Part No.-3128060300 , Ring Part No.-3128061600 , Gasket Part No.-3128061801 , Gasket Part No.-3128061802 , Gasket Part No.-3128061805 , Gasket Part No.-3128061807 , Ring Part No.-3128063100 , Tightn. Unit Part No.-3128063900 , Key Part No.-3128064600 , Pull Rope Part No.-3128064701 , Adjust. Tool Part No.-3128067202 , Spacer Part No.-3128068200 , Spacer Part No.-3128068300 , Spring Part No.-3128068900 , Spring Part No.-3128069000 , Spacer Part No.-3128069100 , Bushing Half Part No.-3128069304 , Bushing Half Part No.-3128069305 , Bushing Half Part No.-3128069403 , Bushing Half Part No.-3128069404 , Bushing Part No.-3128070900 , Bracket Part No.-3128071000 , Limit Switch Part No.-3128071090 , Impulsgivarsats Part No.-3128071092 , Angle Part No.-3128071100 , Clamp Part No.-3128076800 , Wire Rope Part No.-3128078086 , Spacer Part No.-3128078196 , Nippel Part No.-3128078266 , Data Plate Part No.-3128078273 , Lower Part Part No.-3128078285 , Top Part Part No.-3128078287 , End Plate Part No.-3128078288 , Attachment Part No.-3128078360 , Attachment Part No.-3128078367 , Hose Guide Part No.-3128078370 , Slid.Block Part No.-3128078386 , Drill Steel Sup Part No.-3128078390 , Spacer Part No.-3128078406 , Spacer Part No.-3128078407 , Spacer Part No.-3128078408 , Spacer Part No.-3128078409 , Profile Part No.-3128078418 , Drill Steel Sup Part No.-3128078426 , Roll.Bearing Part No.-3128078427 , Spring Part No.-3128078434 , Cradle Plate Part No.-3128078437 , Hållare Part No.-3128078438 , Hållare Part No.-3128078439 , Cradle Part No.-3128078444 , Cradle Plate Part No.-3128078445 , End Piece Part No.-3128078447 , Back Head Part No.-3128078448 , Clamp Part No.-3128078459 , End Plate Part No.-3128078460 , Drill Supp. Part No.-3128078467 , Cyl.Attachm. Part No.-3128078484 , Stop Plate Part No.-3128078496 , Pulley Wheel Part No.-3128078534 , Sleeve Part No.-3128078535 , Bricka Part No.-3128078536 , Gable Plate Part No.-3128078542 , Attachment Part No.-3128078545 , Attach.Plate Part No.-3128078546 , Pipe Part No.-3128078551 , Lower Part Part No.-3128078552 , Top Part Part No.-3128078553 , Bracket Part No.-3128078569 , Spacer Part No.-3128078570 , Sleeve Part No.-3128078571 , Holder Part No.-3128078576 , Holder Part No.-3128078610 , Holder Part No.-3128078611 , Shim Part No.-3128078613 , Cradle Plate Part No.-3128078614 , Spacer Part No.-3128078615 , Protection Part No.-3128078629 , Plunger Part No.-3128082700 , Check Part No.-3222328551 , Hose Fender Part No.-3128087800 , Cradle Plate Part No.-3128089400 , Nipple Part No.-3128093400 , Hållare Part No.-3128094030 , Assembly Set Part No.-3128094032 , Holder Part No.-3128094037 , Shim Part No.-3128094038 , Assembly Set Part No.-3128094039 , Gable Plate Part No.-3128094050 , Gable Plate Part No.-3128094070 , Yoke Part No.-3128096800 , Attachment Part No.-3128096900 , Hose Holder Part No.-3128096980 , Protection Part No.-3128098100 , Stop Set Part No.-3128102026 , Stop Part No.-3128102027 , Spring Part No.-3128200100 , Sealing Set Part No.-3128200490 , Fork Part No.-3128200800 , Link Part No.-3128200900 , Shaft Part No.-3128201100 , End Plate Part No.-3128201200 , End Plate Part No.-3128201202 , End Plate Part No.-3128201203 , End Plate Part No.-3128201204 , Direct.Valve Part No.-3128201948 , Guide Plate Part No.-3128201949 , Slangnippel Part No.-3128201954 , Pr.Red.Valve Part No.-3128201985 , Press.Red.Va Part No.-3128202015 , Press.Red.Va Part No.-3128202018 , Regulator Part No.-3128202064 , Bushing Half Part No.-3128202101 , Bushing Half Part No.-3128202102 , Bushing Half Part No.-3128202103 , Bushing Half Part No.-3128202104 , Bushing Half Part No.-3128202105 , Bushing Half Part No.-3128202106 , Bushing Half Part No.-3128202107 , Bushing Half Part No.-3128202108 , Dr.St.Supp.H Part No.-3128202116 , Bushing Half Part No.-3128202118 , Bushing Half Part No.-3128202120 , Bushing Half Part No.-3128202122 , Bushing Half Part No.-3128202124 , Bushing Half Part No.-3128202129 , Bushing Half Part No.-3128202130 , Damper Part No.-3128206400 , Monteringssa Part No.-3128206729 , Strainer Part No.-3128208500 , Nozzle Part No.-3128208600 , Spray Nozzle Part No.-3128208800 , Dir. Valve Part No.-3128209004 , Cartridge Part No.-3128209011 , Valve Block Part No.-3128209013 , Dir.Valve Part No.-3128209020 , Piston Part No.-3128209034 , Press.Transd Part No.-3128209037 , Seal Kit Part No.-3128209042 , Direction Va Part No.-3128209050 , Direction Va Part No.-3128209051 , Pr.Contr.Val Part No.-3128209052 , Direction Va Part No.-3128209053 , Direction Va Part No.-3128209054 , Direction Va Part No.-3128209057 , Boom Hyd Kit Part No.-3128209059 , Direction Va Part No.-3128209061 , Pr.Contr.Valve Part No.-3128209062 , Rubber Hood Part No.-3128209068 , Direction Va Part No.-3128209069 , Direction Va Part No.-3128209070 , Direction Va Part No.-3128209072 , Direction Va Part No.-3128209073 , Direction Va Part No.-3128209074 , Plug Part No.-3128209076 , Direction Va Part No.-3128209077 , Direction Va Part No.-3128209079 , Direction Va Part No.-3128209091 , Assembly Set Part No.-3128209093 , Bushing Seg. Part No.-3128209100 , Inlet Section Part No.-3128209101 , Check Valve Part No.-3128209105 , Cap Kit Part No.-3128209106 , Cap Part No.-3128209107 , Pull Rod Set Part No.-3128209109 , Press.Rel.Va Part No.-3128209125 , Pull Rod Set Part No.-3128209126 , End Piece Set Part No.-3128209128 , Spring Part No.-3128209129 , Spool Valve Part No.-3128209138 , Seal Kit Part No.-3128209144 , Bearing Kit Part No.-3128209145 , Protect.Bellows Part No.-3128209149 , Kit Part No.-3128209162 , Kit Part No.-3128209163 , Spring Set Part No.-3128209168 , Lever Part No.-3128209169 , Spring Part No.-3128209184 , Cover Part No.-3128209201 , Scraper Part No.-3128209301 , Seal Part No.-3128209302 , Washer Part No.-3128209401 , Hylsa Part No.-3128209700 , Attachm. Plate Part No.-3128209800 , Attachm. Pla Part No.-3128209801 , Anti-Inducti Part No.-3128209922 , Flow Reg. Part No.-3128209933 , Backventil Part No.-3128209955 , Seal Kit Part No.-3128209965 , Hyd.Cylinder Part No.-3128209972 , Check Valve Part No.-3128209998 , Valve Block Part No.-3128209999 , Relief Valve Part No.-3128210034 , Exp.Shaft Part No.-3128211480 , Drill Supp. Part No.-3128212200 , Gasket Set Part No.-3128212490 , Bushing Part No.-3128215200 , Spacer Part No.-3128216100 , Cover Part No.-3128216500 , Seal Part No.-3128216600 , Bushing Seg. Part No.-3128216900 , Cylind.Bracket Part No.-3128217202 , Cylind.Bracket Part No.-3128217203 , Cover Part No.-3128217400 , Seal Kit Part No.-3128219148 , Bearing Part No.-0501000061 , Spacer Part No.-3128219200 , Piston Rod Part No.-3128220600 , Holder Part No.-3128222740 , Bushing Half Part No.-3128224104 , Bushing Half Part No.-3128224107 , Bushing Half Part No.-3128224108 , Piston Part No.-3128225001 , Spring Part No.-3128225100 , Cover Part No.-3128226200 , Lock Washer Part No.-3128227301 , Flödesregulator Part No.-3128228101 , Shelf Part No.-3128228702 , Shelf Part No.-3128228703 , Cradle Part No.-3128228713 , End Piece Part No.-3128228729 , Stop Part No.-3128228730 , Shim Part No.-3128228731 , Slid.Piece Part No.-3128228755 , Sliding Piece Part No.-3128228757 , Sliding Piece Part No.-3128228758 , Bushing Part No.-3128228763 , Guide Spindle Part No.-3128228774 , Piston Rod Part No.-3128228792 , Cover Part No.-3128228800 , Drill Supp. Part No.-3128230102 , Liner Part No.-3128231241 , Shaft Part No.-3128231289 , Hyd.Cylinder Part No.-3128231290 , Damping Elem Part No.-3128235300 , Spacer Part No.-3128237600 , Spacer Part No.-3128237617 , Repair Kit Part No.-3128239324 , Bushing Part No.-3128240000 , Jaw Part No.-3128240300 , Shaft Part No.-3128240400 , Shaft Part No.-3128240500 , Bushing Half Part No.-3128240701 , Screw Part No.-3128241500 , Hose Fender Part No.-3128241701 , Shaft Part No.-3128242700 , Attachment Part No.-3128242712 , Attachment Part No.-3128242714 , Gasket Part No.-3128242800 , Arm Part No.-3128243002 , Holder Set Part No.-3128243358 , Attachment Part No.-3128243400 , Gasket Part No.-3128243500 , Supp.Plate Part No.-3128245800 , Holder Part No.-3128245900 , Washer Part No.-3128247393 , Protection Part No.-3128250806 , Protection Part No.-3128252259 , Roller Chain Part No.-3128252589 , Protect.Coil Part No.-3128252625 , Shaft Part No.-3128253358 , Pump Element Part No.-3128253801 , Relief Valve Part No.-3128253802 , Valve Block Part No.-3128253803 , Extender Part No.-3128253806 , Bushing Part No.-3128253807 , Threaded Sleeve Part No.-3128253808 , Hose Adapter Part No.-3128253809 , High Power Pipe Part No.-3128253810 , Valve Part No.-3128253816 , Valve House Part No.-3128253817 , Valve House Part No.-3128253818 , Lubr.Valve Part No.-3128253820 , Lubric.Pump Part No.-3128253836 , Valve Housin Part No.-3128253837 , Valve House Part No.-3128253887 , Valve House Part No.-3128253888 , Lub Valve Part No.-3128253980 , Check Valve Part No.-3128253995 , Nipple Block Part No.-3128254114 , Support Part No.-3128255021 , Sleeve Part No.-3128255076 , Hydr.Motor Part No.-3128255305 , Sealing Set Part No.-3128255310 , Clamp Part No.-3128255903 , Back Head Part No.-3128256139 , Spacer Part No.-3128256158 , Shaft Part No.-3128256165 , Bushing Part No.-3128256166 , Pulley Wheel Part No.-3128256167 , Pulley Wheel Part No.-3128256169 , Spacer Part No.-3128256198 , Cradle Part No.-3128256199 , Sensor Flag Part No.-3128256848 , Bushing Part No.-3128257000 , Bushing Part No.-3128257001 , Bearing Bush Part No.-3128257003 , Yoke Part No.-3128257511 , Holder Part No.-3128257567 , Holder Part No.-3128257578 , Protection Part No.-3128257780 , Roller Part No.-3128257841 , Guide Part No.-3128257938 , Guide List Part No.-3128258215 , Attachment Part No.-3128258235 , Rubb.Protec. Part No.-3128258238 , Flat Bar Part No.-3128258239 , Flat Bar Part No.-3128258240 , Support Part No.-3128258261 , Clamp Part No.-3128258293 , Hyd.Cylinder Part No.-3128259200 , Piston Part No.-3128259216 , Washer Part No.-3128259217 , Seal Kit Part No.-3128259218 , Seal Kit Part No.-3128259219 , Hyd.Cylinder Part No.-3128259241 , Hyd.Cylinder Part No.-3128259242 , Hyd.Cylinder Part No.-3128259243 , Sealing Set Part No.-3128259244 , Sealing Set Part No.-3128259248 , Bricka Part No.-3128259249 , Sealing Set Part No.-3128259250 , Seal Kit Part No.-3128259254 , Kolv Part No.-3128259255 , Seal Kit Part No.-3128259258 , Bricka Part No.-3128259259 , Kolv Part No.-3128259261 , Seal Kit Part No.-3128259296 , Cylinder Part No.-3128259401 , Hyd.Cylinder Part No.-3128259402 , Hydr. Cylinder Part No.-3128259403 , Cylinder Part No.-3128259404 , Hyd.Cyl Part No.-3128259406 , Piston Rod Part No.-3128259407 , Seal Kit Part No.-3128259426 , Attachment Part No.-3128259750 , Hyd. Cylinde Part No.-3128259843 , Piston Part No.-3128259845 , Seal Kit Part No.-3128259846 , Hydr. Cylind Part No.-3128259848 , Thru.Bearing Part No.-3128280000 , Cylinder Lin Part No.-3128280003 , Thru.Bearing Part No.-3128280004 , Boom Link Part No.-3128280005 , Länk Part No.-3128280007 , Axiallager Part No.-3128280008 , Axiallager Part No.-3128280009 , Axiallager Part No.-3128280010 , Bomfäste Part No.-3128280027 , Bomfäste Part No.-3128280031 , Bomlänk Part No.-3128280036 , Boom Link Part No.-3128280043 , Cylinder Set Part No.-3128280128 , Cylinder Set Part No.-3128280182 , Cylinder Set Part No.-3128280183 , Ext.Cylinder Part No.-3128280770 , Telescope Set Part No.-3128280771 , Piston Rod Part No.-3128280778 , Cylind.Bracket Part No.-3128280780 , Trust Washer Part No.-3128280815 , Bushing Part No.-3128280816 , Trust Washer Part No.-3128280822 , Expanding Sh Part No.-3128280825 , Shaft Part No.-3128280865 , Hydr. Cylind Part No.-3128280881 , Brg. Hsg. As Part No.-3128280882 , Expanding Sh Part No.-3128280885 , Bushing Part No.-3128280886 , Bearing Plat Part No.-3128280890 , Seal Part No.-3128280893 , Setting Scre Part No.-3128280894 , Sensor Brack Part No.-3128280899 , Seal Holder Part No.-3128280900 , Bearing Plat Part No.-3128280902 , Cover Washer Part No.-3128280903 , Matarhallare Part No.-3128280913 , Hyd. Cylinde Part No.-3128280914 , Hyd. Cylinde Part No.-3128280915 , Expanding Sh Part No.-3128280924 , Expanding Sh Part No.-3128280947 , Belt Tension Part No.-3128280959 , Slide Suppor Part No.-3128280961 , Slide Suppor Part No.-3128280964 , Sliding Plan Part No.-3128280973 , Band Part No.-3128280975 , Stop Part No.-3128280978 , Gear Case Co Part No.-3128281045 , Pressure Scr Part No.-3128281049 , Sliding Bloc Part No.-3128281069 , Wire Attachm Part No.-3128281087 , Attachm.Comp Part No.-3128281100 , Attachm.Comp Part No.-3128281101 , Hyd. Cylinde Part No.-3128281102 , Hyd. Cylinde Part No.-3128281104 , Cylinder Bra Part No.-3128281121 , Cylinder Bra Part No.-3128281187 , Cover Part No.-3128290019 , Cover Part No.-3128290020 , Cover Part No.-3128290021 , Cover Part No.-3128290022 , Cover Part No.-3128290023 , Cover Part No.-3128290028 , Clamp Iron Part No.-3128290035 , Bearing Part No.-3128300021 , Roll.Bearing Part No.-3128300102 , Holder Part No.-3128300107 , Shaft Part No.-3128300108 , Roller Part No.-3128300112 , Spac. Sleeve Part No.-3128300155 , Clamp Part No.-3128300162 , Bearing Hous Part No.-3128300174 , Roller Part No.-3128300203 , Shaft Part No.-3128300216 , Cover Part No.-3128300217 , Spacer Ring Part No.-3128300220 , Spacer Ring Part No.-3128300221 , Back-Up Ring Part No.-3128300230 , Pist.Rod End Part No.-3128300268 , Pist.Rod End Part No.-3128300269 , Attachment Part No.-3128300270 , Plug Part No.-3128300407 , Sliding Bar Part No.-3128300481 , Tensioner Part No.-3128300525 , Plug Part No.-3128300537 , Cutting Ring Part No.-3128300538 , Connecting Link Part No.-3128300553 , Detail Set Part No.-3128300733 , Seal Set Part No.-3128300734 , Roller Part No.-3128300756 , Motor Casing Part No.-3128300811 , Protection Part No.-3128300975 , Stop Part No.-3128301043 , Pinch Bar H. Part No.-3128301078 , Pinch Bar H. Part No.-3128301079 , Attachment Part No.-3128301095 , Holder Part No.-3128301176 , Cover Plate Part No.-3128301190 , Key Part No.-3128301232 , Sleeve Part No.-3128301233 , Cover Part No.-3128301235 , Bearing Hous Part No.-3128301236 , Cover Part No.-3128301237 , Cover Part No.-3128301238 , Seal Part No.-3128301239 , Cover Part No.-3128301240 , End Plate Part No.-3128301273 , Bear.Housing Part No.-3128301290 , Protect.Arch Part No.-3128301360 , Protection Part No.-3128301366 , Pist.Rod End Part No.-3128301389 , Check Part No.-3128301390 , Check Part No.-3128301391 , Shaft Part No.-3128301457 , Chain Bracket Part No.-3128301460 , Attachment Part No.-3128301559 , Cover Plate Part No.-3128301617 , Attachment Part No.-3128301724 , Yoke Part No.-3128301725 , Hook Part No.-3128301894 , Shaft Part No.-3128301895 , Shaft Part No.-3128301896 , Pull Rod Set Part No.-3128301996 , Pin Part No.-3128302000 , Clamp Part No.-3128302006 , Gummiduk Part No.-3128302054 , Attachment Part No.-3128302055 , Flat Bar Part No.-3128302056 , Clamp Part No.-3128302094 , Check Part No.-3128302217 , Pin Part No.-3128302232 , Check Part No.-3128302270 , O-Ring Part No.-3128302310 , Check Part No.-3128302351 , Insats Part No.-3128302371 , Seal Kit Part No.-3128302372 , Stop R.Half Part No.-3128302389 , Check Part No.-3128302392 , Drill St.Sup Part No.-3128302411 , Ext. Set Part No.-3128302413 , Wrench Part No.-3128302415 , Check Valve Part No.-3128302428 , Repair Kit Part No.-3128302506 , Sealing Set Part No.-3128302508 , Bushing Part No.-3128302547 , Bushing Part No.-3128302549 , Bushing Part No.-3128302550 , Bushing Part No.-3128302551 , Bushing Part No.-3128302552 , Bushing Part No.-3128302555 , Bushing Part No.-3128302556 , Bushing Part No.-3128302557 , Bushing Part No.-3128302558 , Bushing Part No.-3128302559 , Bushing Part No.-3128302560 , Bushing Part No.-3128302561 , Bushing Part No.-3128302562 , Shaft Set Part No.-3128302588 , Check Part No.-3128302697 , Spacer Part No.-3128302760 , Plug Part No.-3128302788 , Bushing Part No.-3128302953 , Bushing Part No.-3128302954 , Exp.Shaft Part No.-3128302956 , Stop Part No.-3128303022 , Dr.St.Supp.Half Part No.-3128303131 , Bushing Part No.-3128303164 , Pinch B.Hous Part No.-3128303328 , Bearing Ring Part No.-3128303335 , Bearing Ring Part No.-3128303336 , Slide Washer Part No.-3128303338 , Bushing Part No.-3128303434 , Cover Part No.-3128303469 , Attachment Part No.-3128303558 , Stöd Part No.-3128303569 , Protection Part No.-3128303570 , Protection Part No.-3128303571 , Clamp Part No.-3128303590 , Seal Part No.-3128303651 , Dowel Part No.-3128303703 , Check Part No.-3128303885 , Bushing Part No.-3128303896 , Bushing Part No.-3128303897 , Interm.Plate Part No.-3128303921 , Guide Sleeve Part No.-3128304024 , Dir.Valve Part No.-3128304271 , Seal Part No.-3128304301 , O-Ring Part No.-3128304311 , Slid.Piece Part No.-3128304355 , Exp. Shalft Part No.-3128304412 , Pinchbar Hou Part No.-3128304443 , Holder Part No.-3128304519 , Cap Part No.-3128304550 , Check Part No.-3128304574 , Stop Ring Ha Part No.-3128304695 , Cutt.Guide Part No.-3128304781 , Check Part No.-3128304911 , Reservoir Part No.-3128304942 , Plug Part No.-3128304943 , Cradle Part No.-3128305147 , End Piece Part No.-3128305171 , Pipe Part No.-3128305175 , Back Head Part No.-3128305184 , Driver Part No.-3128305225 , Repair Kit Part No.-3128305422 , Bracket Part No.-3128305464 , Check Part No.-3128305496 , Clamp Part No.-3128305561 , Clamp Part No.-3128305562 , Clamp Part No.-3128305575 , Jaw Part No.-3128305577 , Interm.Supp. Part No.-3128305622 , Interm.Supp. Part No.-3128305623 , Gummiduk Part No.-3128305626 , Clamp Part No.-3128305729 , Clamp Part No.-3128305796 , Distanshylsa Part No.-3128305915 , Interm.Supp. Part No.-3128305929 , Interm.Supp. Part No.-3128305930 , Cradle Part No.-3128305977 , Bellow Coupl Part No.-3128305989 , Interm.Dr.Su Part No.-3128305993 , Hyd.Cylinder Part No.-3128306000 , Hyd.Cylinder Part No.-3128306004 , Hyd.Cylinder Part No.-3128306006 , Hyd.Cylinder Part No.-3128306015 , Hyd.Cylinder Part No.-3128306016 , Hyd.Cylinder Part No.-3128306019 , Hyd. Cylinde Part No.-3128306020 , Hyd.Cylinder Part No.-3128306021 , Hyd.Cylinder Part No.-3128306024 , Hyd.Cylinder Part No.-3128306028 , Hyd.Cylinder Part No.-3128306030 , Hydr. Cylind Part No.-3128306042 , Hyd.Cylinder Part No.-3128306043 , Attach. Lug Part No.-3128306102 , Key Part No.-3128306124 , Wiper Part No.-3128306147 , Holder Set Part No.-3128306163 , Holder Set Part No.-3128306164 , Borrmaskinsats Part No.-3128306175 , Hållare Part No.-3128306180 , Hållare Part No.-3128306181 , Gränsläg.Ventil Part No.-3128306183 , Seal Plug Part No.-3128306186 , Shim Set Part No.-3128306233 , Connector Part No.-3128306245 , Seal Part No.-3128306247 , Seal Part No.-3128306248 , Seal Part No.-3128306249 , Hose Holder Part No.-3128306256 , Yoke Part No.-3128306257 , Attachment Part No.-3128306261 , Clamp Part No.-3128306318 , Check Valve Part No.-3128306359 , Exp. Shaft Part No.-3128306383 , Cover Part No.-3128306425 , Shim Part No.-3128306426 , Hub Part No.-3128306489 , Attach.Plate Part No.-3128306542 , Sensor Prot. Part No.-3128306545 , Attachment Part No.-3128306556 , Attach.Plate Part No.-3128306585 , Coupling Part No.-3128306610 , Plate Part No.-3128306622 , Plate Part No.-3128306623 , Plate Part No.-3128306624 , Bushing Part No.-3128306765 , Lock Sheet Part No.-3128306822 , Shaft Part No.-3128306949 , Shaft Part No.-3128306950 , Axel Part No.-3128306951 , Bolt Part No.-3128306953 , Bolt Part No.-3128306954 , Bolt Part No.-3128306955 , Sensor Set Part No.-3128307011 , Sensor Set Part No.-3128307012 , Sensor Set Part No.-3128307013 , Sensor Set Part No.-3128307015 , Linear Senso Part No.-3128307018 , Cover Part No.-3128307020 , Wire Part No.-3128307030 , Boom Body Part No.-3128307033 , Holder Part No.-3128307040 , Gasket Part No.-3128307045 , Cover Part No.-3128307050 , Cable Tray Part No.-3128307069 , Attachment Part No.-3128307127 , Dr.Steel Sup Part No.-3128307184 , Cradle Plate Part No.-3128307192 , Tool Retaine Part No.-3128307240 , Hose Attachment Part No.-3128307304 , Segment Part No.-3128307466 , Segment Part No.-3128307468 , Protect.Coil Part No.-3128307483 , Segment Part No.-3128307494 , Segment Part No.-3128307495 , Segment Part No.-3128307496 , Cradle Plate Part No.-3128307653 , Valve Part No.-3128307664 , Valve Part No.-3128307666 , Seal Kit Part No.-3128307667 , Valve Part No.-3128307668 , Aim Plate Part No.-3128307693 , Aim Plate Part No.-3128307694 , Calibr. Set Part No.-3128307695 , Sight Part No.-3128307696 , Sight Part No.-3128307697 , Inclinometer Part No.-3128307712 , Hose Holder Part No.-3128307718 , Hose Holder Part No.-3128307719 , Sensor Prote Part No.-3128307721 , Sensor Prote Part No.-3128307724 , Parts Kit Part No.-3128307737 , Renoveringssats Part No.-3128307754 , Seal Kit Part No.-3128307760 , Plate Part No.-3128307772 , Plate Part No.-3128307773 , Attachment Part No.-3128307777 , Renoveringssats Part No.-3128307778 , Attachment Part No.-3128307788 , Plate Part No.-3128307789 , Red. Valve Part No.-3128307798 , Sensor Prot. Part No.-3128307816 , Holder Part No.-3128307858 , Sensor Set Part No.-3128307863 , Pulley Wheel Part No.-3128307888 , Linear Senso Part No.-9106152440 , Boom Support Part No.-3128307935 , Cover Part No.-3128307939 , Lock Nut Part No.-3128307946 , Attachment Part No.-3128307947 , Extension Tu Part No.-3128307972 , Guide Tube Part No.-3128307975 , Turning Devi Part No.-3128307978 , Bulkhead Conn. Part No.-3128307982 , Bulkhead Conn. Part No.-3128307983 , Inclinometer Part No.-3128307991 , Exp.Shaft Co Part No.-3128308004 , Key Part No.-3128308017 , Cover Part No.-3128308018 , Shaft Part No.-3128308035 , Bomfäste Part No.-3128308042 , Bom Part No.-3128308043 , Attachment Part No.-3128308047 , Attachment Part No.-3128308054 , Wire Attachm Part No.-3128308067 , Wire Attachm Part No.-3128308068 , Cover Part No.-3128308092 , Sensor Prote Part No.-3128308106 , Attachm.Plat Part No.-3128308114 , Bushing Part No.-3128308121 , Bushing Part No.-3128308122 , Hyd.Cylinder Part No.-3128308129 , Bushing Part No.-3128308130 , Space Sleeve Part No.-3128308131 , Shaft Part No.-3128308135 , Hyd.Cylinder Part No.-3128308143 , Shaft Part No.-3128308149 , Link Part No.-3128308150 , Boom Link Part No.-3128308152 , Screw Part No.-3128308154 , Cover Part No.-3128308190 , Bushing Part No.-3128308251 , Sensor Set Part No.-3128308274 , Sensor Set Part No.-3128308275 , Protection Part No.-3128308277 , Axel Part No.-3128308303 , Cover Part No.-3128308306 , Sensor Prote Part No.-3128308338 , Nipple Part No.-3128308346 , Hyd. Pipe Part No.-3128308347 , Attachment Part No.-3128308383 , Holder Part No.-3128308386 , Holder Part No.-3128308387 , Assembly Set Part No.-3128308388 , Overc.Valve Part No.-3128308391 , Holder Part No.-3128308641 , Exc.Washer Part No.-3128308717 , Attachment Part No.-3128308720 , Seal Kit Part No.-3128308726 , Valve Part No.-3128308727 , Coil Part No.-3128308729 , Seal Kit Part No.-3128308730 , Seal Kit Part No.-3128308731 , Seal Part No.-3128308819 , Washer Part No.-3128309040 , Roller Path Part No.-3128309042 , Guide Strip Part No.-3128309048 , Guide Strip Part No.-3128309049 , Catch Part No.-3128309061 , Stop Lug Part No.-3128309062 , Bracket Part No.-3128309077 , Potentiomete Part No.-3128309090 , Spring Part No.-3128309091 , Shaft Part No.-3128309115 , Shaft Lock Part No.-3128309116 , Bearing Part No.-3128309117 , Bracket Part No.-3128309122 , Arm Part No.-3128309127 , Arm Part No.-3128309137 , Tube Part No.-3128309142 , Shaft Part No.-3128309152 , Turning Devi Part No.-3128309172 , Plate Part No.-3128309173 , Arm Part No.-3128309175 , Bracket Part No.-3128309177 , Clamp Part No.-3128309183 , Attachment Part No.-3128309200 , Attachment Part No.-3128309204 , Shaft Part No.-3128309206 , Bracket Comp Part No.-3128309208 , Holder Part No.-3128309213 , Prot.Arch Part No.-3128309216 , Bearing Part No.-3128309217 , Disk Part No.-3128309219 , Tube Driver Part No.-3128309222 , Protection A Part No.-3128309225 , Holder Part No.-3128309228 , Dividing Disk Part No.-3128309232 , Holder Part No.-3128309233 , Protect. Frame Part No.-3128309238 , Tube Driver Part No.-3128309245 , Seal Kit Part No.-3128309251 , Hose Holder Part No.-3128309255 , Stopper Part No.-3128309261 , Bushing Part No.-3128309270 , Bushing Part No.-3128309271 , Bushing Part No.-3128309272 , Bushing Part No.-3128309273 , Roller Disc Part No.-3128309276 , Stopper Part No.-3128309279 , Turning Devi Part No.-3128309281 , Key Part No.-3128309291 , Attachment Part No.-3128309302 , Hyd.Cyl Part No.-3128309310 , Wire Attachm Part No.-3128309330 , Bearing Set Part No.-3128309345 , Bushing Part No.-3128309361 , Shim Part No.-3128309369 , Gear Part No.-3128309376 , Brake Part No.-3128309377 , Hyd.Motor Part No.-3128309378 , Gear Complet Part No.-3128309381 , Exp.Shaft Part No.-3128309396 , Attachment Part No.-3128309406 , Magazine Part No.-3128309408 , Drill Holder Part No.-3128309410 , Stop Part No.-3128309411 , Hub Part No.-3128309412 , Disc Part No.-3128309415 , Stay Part No.-3128309416 , Sliding List Part No.-3128309418 , Arm Part No.-3128309431 , Jaw Part No.-3128309433 , Shaft Part No.-3128309436 , Shaft Part No.-3128309437 , Shaft Part No.-3128309438 , Protection Part No.-3128309440 , Fitting Bolt Part No.-3128309441 , Attachment Part No.-3128309443 , Bearing Part No.-3128309456 , Bearing Part No.-3128309457 , Valve Block Part No.-3128309511 , Attachment Part No.-3128309524 , Cradle Part No.-3128309562 , Stop Lug Part No.-3128309582 , Washer Part No.-3128309732 , Arm Part No.-3128309734 , Clamp Part No.-3128309736 , Shim Part No.-3128309740 , Seal Kit Part No.-3128309756 , Operators To Part No.-3128309760 , End Plate Part No.-3128309788 , Sleeve Part No.-3128309791 , Interm. Plat Part No.-3128309793 , Sensor Brack Part No.-3128309799 , Clamp Part No.-3128309812 , Attachment Part No.-3128309813 , Attachment Part No.-3128309820 , Holder Part No.-3128309822 , Bearing Unit Part No.-3128309842 , Pin Part No.-3128309850 , Guide Part No.-3128309852 , Guide Part No.-3128309858 , Water Level Part No.-6060013895 , Pinion Part No.-3128309879 , Protection Part No.-3128309929 , Stud Part No.-3128309931 , Stud Part No.-3128309932 , Plate Part No.-3128309933 , Shaft Compl. Part No.-3128309970 , Sensor Flag Part No.-3128309971 , Sensor Set Part No.-3128310075 , Interm.Supp. Part No.-3128310106 , Attachment Part No.-3128310107 , Arm Part No.-3128310108 , Arm Part No.-3128310109 , Shaft Part No.-3128310111 , Shaft Part No.-3128310112 , Shaft Part No.-3128310113 , Carriage Part No.-3128310115 , Pr.Gauge Set Part No.-3128310123 , End Piece Part No.-3128310200 , Arm Part No.-3128310206 , Cover Part No.-3128310208 , Spacer Part No.-3128310212 , Spacer Part No.-3128310213 , Cover Part No.-3128310214 , Cover Part No.-3128310215 , Cover Part No.-3128310216 , Cover Part No.-3128310217 , Wear Plate Part No.-3128310249 , Shaft Part No.-3128310267 , Gable Plate Part No.-3128310271 , Gable Plate Part No.-3128310272 , Gable Plate Part No.-3128310273 , Gable Plate Part No.-3128310274 , Shaft Part No.-3128310275 , Rot.Ch.Bushi Part No.-3128310276 , Stay Part No.-3128310283 , Stay Part No.-3128310292 , Prot.Arch Part No.-3128310293 , Protechtion Part No.-3128310294 , Plunge Part No.-3128310350 , House Part No.-3128310351 , Piston Rod Part No.-3128310352 , Plunger Part No.-3128310353 , Steel Angle Part No.-3128310357 , Attachment Part No.-3128310364 , Guide Spind. Part No.-3128310372 , Guide Spind. Part No.-3128310373 , Jaw Part No.-3128310378 , Shaft Part No.-3128310390 , Shaft Part No.-3128310391 , Bearing Hous Part No.-3128310392 , Bearing Hous Part No.-3128310393 , Cover Part No.-3128310394 , Arm Part No.-3128310398 , Spacer Part No.-3128310400 , Link Part No.-3128310401 , Piston Rod Part No.-3128310402 , Fork Part No.-3128310406 , Bush.Half Part No.-3128310420 , Bush.Half Part No.-3128310421 , Bushing Half Part No.-3128310422 , Bush.Half Part No.-3128310423 , Bushing Half Part No.-3128310425 , Bush.Half Part No.-3128310426 , Bushing Half Part No.-3128310427 , Sensor Set Part No.-3128310428 , Bushing Part No.-3128310453 , Exp.Shaft Part No.-3128310472 , Cradle Part No.-3128310511 , Spacer Part No.-3128310512 , Spacer Part No.-3128310513 , Magnet Part No.-3128310518 , Spacer Part No.-3128310520 , Spacer Part No.-3128310522 , Collect.Bloc Part No.-3128310575 , Shaft Part No.-3128310596 , Exp.Shaft Part No.-3128310598 , Bushing Part No.-3128310601 , Cylinder Part No.-3128310612 , Bushing Part No.-3128310613 , Bearing Unit Part No.-3128310635 , Attachm. Pla Part No.-3128310678 , Holder Part No.-3128310679 , Pin Part No.-3128310702 , Bushing Part No.-3128310730 , Protection Part No.-3128310732 , Guard Part No.-3128310733 , Plate Part No.-3128310734 , Guard Part No.-3128310735 , Guard Part No.-3128310736 , Flat Bar Part No.-3128310737 , Holder Part No.-3128310747 , Cradle Plate Part No.-3128310841 , Bolt Cradle Part No.-3128310848 , Bulkhead Conn. Part No.-3128310852 , Bulkhead Conn. Part No.-3128310854 , Bulkhead Conn. Part No.-3128310856 , Bulkhead Conn. Part No.-3128310858 , Feeding Dev. Part No.-3128310878 , Attachment Part No.-3128310879 , Pipe Guide Part No.-3128310881 , Hyd.Cylinder Part No.-3128310883 , Nozzle Part No.-3128310884 , Cradle Part No.-3128310890 , Hose Guide Part No.-3128310891 , Clamp Part No.-3128310946 , Guard Part No.-3128310963 , Guard Part No.-3128310973 , Hose Guide Set Part No.-3128310983 , Hose Frame Part No.-3128311007 , Hose Frame Part No.-3128311009 , Seal Part No.-3128311013 , Steel Cable Part No.-3128311042 , Steel Cable Part No.-3128311043 , Steel Cable Part No.-3128311044 , Steel Cable Part No.-3128311045 , Steel Cable Part No.-3128311046 , Steel Cable Part No.-3128311047 , Clamp Part No.-3128311058 , Plate Part No.-3128311243 , Hyd.Cylinder Part No.-3128311254 , Washer Part No.-3128311278 , Drill Steel Part No.-3128311311 , Cylind.Brack Part No.-3128311349 , Hose Holder Part No.-3128311382 , Cover Part No.-3128311393 , Shaft Part No.-3128311394 , Direction Va Part No.-3128311451 , Press.Rel.Va Part No.-3128311469 , Exp.Shaft Co Part No.-3128311511 , Protection Part No.-3128311543 , Bushing Part No.-3128311574 , Expanding Sh Part No.-3128311575 , Shim Part No.-3128311578 , Shim Part No.-3128311579 , Attachment Part No.-3128311587 , Axel Part No.-3128311588 , Hydraulic Cy Part No.-3128311605 , Cover Part No.-3128311640 , Lock Ring Part No.-3128311641 , Protection R Part No.-3128311673 , Slid.Piece Part No.-3128311674 , Protection Part No.-3128311698 , Bushing Part No.-3128311701 , Protection Part No.-3128311714 , Attachment S Part No.-3128311723 , Protection R Part No.-3128311794 , Protection Part No.-3128311795 , Pulley Wheel Part No.-3128311802 , Cover Part No.-3128311804 , Attachment Part No.-3128311805 , Washer Part No.-3128311807 , Plate Part No.-3128311832 , Guide Strip Part No.-3128311833 , Attachment Part No.-3128311847 , Yoke Part No.-3128311879 , Drive Unit Part No.-3128311880 , Shaft Part No.-3128311881 , Stop Part No.-3128311882 , Shaft Coupli Part No.-3128311883 , Torque Arm Part No.-3128311884 , Protection Part No.-3128311966 , Seal Set Part No.-3128311987 , Repair Set Part No.-3128311988 , Hard Ware Ki Part No.-3128311989 , Motor Suppor Part No.-3128312002 , Attachment Part No.-3128312017 , Linear Senso Part No.-3128312019 , Shaft Part No.-3128312020 , Hydraulcylin Part No.-3128312230 , Hydraulcylin Part No.-3128312231 , Jaw Part No.-3128312274 , Bushing Half Part No.-3128312276 , Bushing Half Part No.-3128312277 , Attachment N Part No.-3128312286 , Spacer Part No.-3128312290 , Segment D89 Part No.-3128312295 , Holder Compl Part No.-3128312307 , Holder Compl Part No.-3128312308 , Cradle Part No.-3128312497 , Seal Kit Part No.-3128312533 , Piston Rod Part No.-3128312534 , Nozzle Part No.-3128312540 , Seal Kit Part No.-3128312566 , Bearing Set Part No.-3128312567 , Assemb. Deta Part No.-3128312568 , End Cap Part No.-3128312569 , Overcent.Valve Part No.-3128312570 , Seal Kit Part No.-3128312571 , Bearing Set Part No.-3128312572 , End Cap Part No.-3128312573 , Key Part No.-3128312577 , Extension Tu Part No.-3128312579 , Seal Kit Part No.-3128312582 , Bearing Set Part No.-3128312583 , Assemb.Det. Part No.-3128312584 , End Cap Part No.-3128312588 , Turning Devi Part No.-3128312607 , Kolvstång Part No.-3128312617 , Check Part No.-3128312635 , Protection Part No.-3128312639 , Turning Devi Part No.-3128312643 , Turning Device Part No.-3128312644 , Hyd.Cylinder Part No.-3128312650 , Stop Part No.-3128312680 , Chain Part No.-3128312686 , End Cap Part No.-3128312688 , Cover Part No.-3128312689 , Tube Kit Part No.-3128312690 , Kit Part No.-3128312707 , House Part No.-3128312708 , Shaft Part No.-3128312709 , Piston Part No.-3128312710 , Lock Nut Part No.-3128312711 , Valve Part No.-3128312712 , Tube Part No.-3128312713 , Shim Part No.-3128313311 , Bracket Part No.-3128313318 , Nozzle Set Part No.-3128313334 , Bushing Part No.-3128313352 , Protection Part No.-3128313358 , Sensor Part No.-3128313384 , Linear Senso Part No.-3128313385 , Square Bar Part No.-3128313393 , Stinger Part No.-3128313397 , Inner Tube Part No.-3128313398 , Hydr. Cylind Part No.-3128313401 , Hydr. Cylind Part No.-3128313402 , Hydr.Cylinde Part No.-3128313403 , Hydr.Cylinde Part No.-3128313404 , Bushing Part No.-3128313405 , Protection Part No.-3128313440 , Protection Part No.-3128313442 , Valve Part No.-3128313444 , Bearing Set Part No.-3128313446 , Protection Part No.-3128313455 , Hyd. Cylinde Part No.-3128313457 , Rope Attachm Part No.-3128313468 , Valve Sectio Part No.-3128313479 , Press.Regula Part No.-3128313525 , Press.Regula Part No.-3128313527 , Cradle Plate Part No.-3128313579 , Rope Tension Part No.-3128313591 , Bushing Part No.-3128313618 , Holder Part No.-3128313621 , Support Half Part No.-3128313623 , Lock Ring Part No.-3128313680 , Hyd.Cylinder Part No.-3128313751 , Hyd.Cylinder Part No.-3128313752 , Hyd.Cylinder Part No.-3128313753 , Stopp Part No.-3128313821 , Attachment Part No.-3128313830 , Wire Attachm Part No.-3128313834 , Stop Plate Part No.-3128313846 , Stop Pin Part No.-3128313855 , Sight Part No.-3128313862 , Protechtion Part No.-3128313983 , Spacer Part No.-3128314002 , Holder Set Part No.-3128314012 , Holder Set Part No.-3128314013 , Protection Part No.-3128314086 , Cradle Plate Part No.-3128314094 , Cradle Set Part No.-3128314095 , Holder Set Part No.-3128314096 , Holder Set Part No.-3128314097 , Cradle Part No.-3128314098 , Cradle Set Part No.-3128314099 , Spacer Part No.-3128314101 , Spacer Part No.-3128314102 , Vinkel Part No.-3128314103 , Pulley Wheel Part No.-3128314104 , Spacer Part No.-3128314105 , Cradle Plate Part No.-3128314107 , End Piece Se Part No.-3128314113 , Cover Part No.-3128314135 , Spare P. Se Part No.-3128314138 , Gable Plate Part No.-3128314166 , Bushing Part No.-3128314167 , Pipe Part No.-3128314179 , Washer Part No.-3128314231 , Adapter Plat Part No.-3128314232 , Hyd.Cylinder Part No.-3128314237 , Hyd.Cylinder Part No.-3128325723 , Hyd.Cylinder Part No.-3128325725 , Hydr. Cylind Part No.-3128325726 , Hyd.Cylinder Part No.-3128325727 , Seal Kit Part No.-3128314257 , Piston Part No.-3128314258 , Cover Part No.-3128314260 , Piston Rod Part No.-3128314263 , Attachment Part No.-3128314273 , Rubber Cloth Part No.-3128314277 , Arm Part No.-3128314278 , Bracket Part No.-3128314284 , Konsol Part No.-3128314285 , Hub Part No.-3128314289 , Protection Part No.-3128314291 , Shaft Part No.-3128314293 , Seal Kit Part No.-3128314316 , Shaft Part No.-3128314327 , Hardware Kit Part No.-3128314328 , Sliding Piec Part No.-3128314344 , Plate Part No.-3128314345 , Support Fram Part No.-3128314346 , Shaft Part No.-3128314355 , Bearing Kit Part No.-3128314445 , Seal Kit Part No.-3128314467 , Cradle Set Part No.-3128314535 , Hydraulic Pi Part No.-3128314624 , Overcenter V Part No.-3128314632 , Bearing Housing Part No.-3128314643 , Bearing Hous Part No.-3128314644 , Attachment Part No.-3128314645 , Valve Block Part No.-3128314651 , Bearing Hous Part No.-3128314659 , Cylinder Lin Part No.-3128314672 , Protection Part No.-3128314675 , Shaft Part No.-3128314695 , Hydr. Cylind Part No.-3128314696 , Connection Part No.-3128314701 , Spacer Tube Part No.-3128314702 , Cradle Part No.-3128314721 , Shim Part No.-3128314749 , Housing Part No.-3128314750 , Bushing Half Part No.-3128314768 , Bushing Half Part No.-3128314769 , Bushing Half Part No.-3128314770 , Sensor Set Part No.-3128314772 , Stop Set Part No.-3128314774 , End Piece Se Part No.-3128314785 , Holder Part No.-3128314800 , Bracket Part No.-3128314981 , Stinger Part No.-3128314982 , Cradle Part No.-3128315024 , Retur Rope Part No.-3128315026 , Stop Set Part No.-3128315028 , Back Head Part No.-3128315039 , Adjusting Plate Part No.-3128315071 , Tube Shaft 1 Part No.-3128315093 , Protect. Shi Part No.-3128315101 , Clamp Part No.-3128315102 , Tube Shaft Part No.-3128315104 , Tube Shaft 2 Part No.-3128315106 , Tube Shaft 2 Part No.-3128315109 , Tube Shaft 3 Part No.-3128315122 , Double Ch.Va Part No.-3128315144 , Bleeder Scre Part No.-3128315148 , Pressure Scr Part No.-3128315204 , Seal Washer Part No.-3128315205 , Seal Kit Part No.-3128315207 , Locking Spri Part No.-3128315253 , Drill Steel Part No.-3128315256 , Seal Kit Part No.-3128315263 , Bellow Part No.-3128315274 , Linear Senso Part No.-3128315283 , End Plate Part No.-3128315288 , Wear Plate Part No.-3128315294 , Wear Plate Part No.-3128315295 , Bracket Part No.-3128315365 , Sleeve Part No.-3128315372 , Sleeve Part No.-3128315374 , Sleeve Part No.-3128315375 , Sleeve Part No.-3128315376 , Sleeve Part No.-3128315377 , Sleeve Part No.-3128315378 , Sleeve Part No.-3128315379 , Hydraulcylin Part No.-3128315401 , Hydraulcylin Part No.-3128315402 , Shaft Part No.-3128315437 , Flange Part No.-3128315450 , Shaft Compl. Part No.-3128315451 , Shaft Part No.-3128315562 , Interm.Drill Part No.-3128315577 , Bushing Part No.-3128315578 , Support Plat Part No.-3128315585 , Rubber Prote Part No.-3128315599 , Planet Gear Part No.-3128315673 , Hydr. Cylind Part No.-3128315692 , Tube Shaft 1 Part No.-3128315800 , Bracket Part No.-3128315802 , Attachment Part No.-3128315830 , Hyd.Cylinder Part No.-3128315850 , Plate Part No.-3128315851 , Seal Part No.-3128315857 , Shaft Part No.-3128315868 , Hub Part No.-3128315903 , Driver Part No.-3128315947 , Stopper Part No.-3128315970 , Drill Steel Part No.-3128316002 , Fastplatta Part No.-3128316008 , Attachment Part No.-3128316023 , Rubber Washe Part No.-3128316024 , Rubber Washe Part No.-3128316026 , Bolt Rotator Part No.-3128316178 , Bearing Reta Part No.-3128316180 , Adapter Part No.-3128316181 , Dividing Dis Part No.-3128316315 , Dividing Dis Part No.-3128316316 , Protection Part No.-3128316343 , Guide Tube Part No.-3128316434 , Shaft Part No.-3128316437 , Roller Part No.-3128316438 , Dividing Dis Part No.-3128316559 , Dividing Dis Part No.-3128316560 , Attachment Part No.-3128316618 , Drive Wheel Part No.-3128316639 , Cover Part No.-3128316673 , Conversionk Part No.-3128316687 , Cylinder Bra Part No.-3128316697 , Drill Steel Part No.-3128316810 , Cradle Part No.-3128316847 , Hydr. Cylind Part No.-3128316882 , Rope Tension Part No.-3128316895 , Turning Cyli Part No.-3128316908 , Connectionbl Part No.-3128316964 , Seal-Kit Part No.-3128317003 , Circlip Part No.-3128317010 , Seal-Kit Part No.-3128317024 , Shaft Part No.-3128317047 , Roller Part No.-3128317048 , Pist.Rod Compl Part No.-3128317083 , Seal Kit Part No.-3128317103 , Piston Rod Part No.-3128317120 , Gripper Part No.-3128317260 , Pin Part No.-3128317263 , Piston Rod Part No.-3128317265 , Bushing Part No.-3128317268 , Wiper Part No.-3128317273 , Angle Sensor Part No.-3128317280 , Sensor Part No.-3128317285 , Protection Part No.-3128317303 , Hydraulcylin Part No.-3128317344 , Shaft Part No.-3128317418 , Attachment Part No.-3128317430 , Wiper Part No.-3128317431 , Hose Clamp Part No.-3128317499 , Pipe Part No.-3128317534 , Cover Part No.-3128317535 , Coupling Part No.-3128317552 , Seal Kit Part No.-3128317554 , Guide Part No.-3128317575 , Support Part No.-3128317576 , Top Part Part No.-3128317578 , Telescope Set Part No.-3128317604 , Extension Tu Part No.-3128317605 , Back Head Part No.-3128317616 , Key Part No.-3128317617 , Cylinder Part No.-3128317698 , Hydr. Cylind Part No.-3128317803 , Piston Rod Part No.-3128317805 , Sleeve Part No.-3128317838 , Hydraulic Bl Part No.-3128318091 , Shims Part No.-3128318093 , Hydraulic Bl Part No.-3128318094 , Support Half Part No.-3128318168 , Hose Attachment Part No.-3128318189 , Cradle Part No.-3128318215 , Cradle Plate Part No.-3128318229 , Holder Part No.-3128318238 , Drill Steel Part No.-3128318260 , Bushing Half Part No.-3128318304 , Cylind.Bracket Part No.-3128318312 , Cylinder Bra Part No.-3128318313 , Disk Part No.-3128318326 , Guide Strip Part No.-3128318343 , Protection A Part No.-3128318347 , Dr.St.Supp.S Part No.-3128318381 , Drill Steel Part No.-3128318382 , Shaft Part No.-3128318493 , Shaft Part No.-3128318494 , Shaft Part No.-3128318496 , End Piece Part No.-3128318512 , Hub Part No.-3128318518 , Cover Part No.-3128318531 , Pin Part No.-3128318532 , Rubber Cloth Part No.-3128318533 , Plate Part No.-3128318534 , Attachment Part No.-3128318535 , Hose Holder Part No.-3128318542 , Chain Part No.-3128318543 , Holder Part No.-3128318577 , Bearing Set Part No.-3128318636 , Mellanborrst Part No.-3128318665 , Interm.Suppo Part No.-3128318678 , Spacer Part No.-3128318696 , End Plate Part No.-3128318698 , Cradle Part No.-3128318700 , Rope Holder Part No.-3128318720 , Drill Carria Part No.-3128318723 , Expanding Sh Part No.-3128318768 , Attachment Part No.-3128318839 , Drill Holder Part No.-3128318848 , Arm Part No.-3128318849 , Hydr. Cylinder Part No.-3128325731 , Attachment Part No.-3128318873 , Passbult Part No.-3128318877 , Flex.Element Part No.-3128318878 , Hose Holder Part No.-3128318961 , Bulkhead Conn. Part No.-3128318973 , Protection R Part No.-3128318974 , Hose Fender Part No.-3128318977 , Hose Holder Part No.-3128318981 , Konsol Part No.-3128318988 , Hydr. Cylind Part No.-3128319021 , Hose Holder Part No.-3128319156 , Yoke Part No.-3128319159 , Bearing Housing Part No.-3128319213 , Feed Holder Part No.-3128319222 , Piston Part No.-3128319249 , Cover Part No.-3128319251 , House Part No.-3128319252 , Flex. Coupli Part No.-3128319268 , Attachment Part No.-3128319269 , Cover Part No.-3128319270 , Front Plate Part No.-3128319299 , Back Part No.-3128320377 , Seal Kit Part No.-3128320379 , Sensor Prote Part No.-3128320380 , Cylinder Gua Part No.-3128320403 , Attachment Part No.-3128320586 , Stop Ring Ha Part No.-3128320622 , Dowel Part No.-3128320724 , Hydr. Cylind Part No.-3128320725 , Tube Shaft 1 Part No.-3128320774 , Slide Part No.-3128320788 , Attachment Part No.-3128320789 , Cradle Part No.-3128320790 , Shaft Part No.-3128320791 , Hydr.Cylinde Part No.-3128320803 , Holder Part No.-3128320845 , Support Disc Part No.-3128320892 , Attachment Part No.-3128320895 , Cylinder Part No.-3128320896 , Guide Spindle Part No.-3128320900 , Pin Part No.-3128320901 , Angle Sensor Part No.-3128321013 , Hydraulcylin Part No.-3128321089 , Hose Fender Part No.-3128321095 , Hydr. Cylinder Part No.-3128321252 , Spur Pinion Part No.-3128321300 , Feed Set Part No.-3128321368 , Boom Set Part No.-3128321405 , Sprocket Whe Part No.-3128321418 , Bulkhead Conn. Part No.-3128321511 , Pulley Wheel Part No.-3128321645 , Bolt Adaptor Part No.-3128321661 , Feed Holder Part No.-3128321771 , Feed Holder Part No.-3128321772 , Hyd Cylinder Part No.-3128321900 , Washer Part No.-3128321959 , Piston Rod Part No.-3128321985 , Bushing Part No.-5750531784 , Valve Part No.-8231120686 , Piston Part No.-3128322028 , Hose Holder Part No.-3128322121 , Hose Holder Part No.-3128322123 , Cover Part No.-3128322213 , Piston Rod Eye Part No.-3128322245 , Feed Holder Part No.-3128322350 , Cradle Part No.-3128322433 , Basic Part Set Part No.-3128322870 , Cylinder Part No.-3128322871 , Blade Spring Part No.-3128323144 , Blade Spring Part No.-3128323145 , Spacer Part No.-3128323293 , Hydr. Cylind Part No.-3128325731 , Clamp Part No.-3128006339 , Extension Tu Part No.-3128998040 , Extension Tu Part No.-3128998041 , Fuel Gauge Part No.-3135600010 , V-Ring Part No.-3137000364 , Lock Needle Part No.-3137148405 , Diode Module Part No.-3137167100 , Adapter Cabl Part No.-3138102004 , Bulldog Grip Part No.-3138505123 , Hyd.Pump Part No.-3150000041 , Seal Kit Part No.-3150000336 , Sealing Set Part No.-3153106190 , Gasket Set Part No.-3153211490 , Scraper Part No.-3153549700 , Gasket Set Part No.-3153623290 , Bricka Part No.-3153865000 , Exp.Shaft Part No.-3155177280 , Cradle Part No.-3155218901 , Exp.Shaft Part No.-3155236780 , Bushing Part No.-3155236800 , Gear Wheel Part No.-3161103500 , Retain.Nut Part No.-3161103600 , Ring Part No.-3161104100 , Ring Part No.-3161109000 , Retain.Nut Part No.-3161109400 , Cover Part No.-3161122500 , Cover Part No.-3161122900 , Ring Part No.-3161123000 , Sleeve Part No.-3161123100 , Gear Wheel Part No.-3161123200 , Ring Part No.-3161123300 , Spindle Part No.-3161123600 , Shim Part No.-3161123700 , Gasket Part No.-3163042701 , Strainer Part No.-3163042780 , Protec.Cap Part No.-3163173000 , Schackel Part No.-3163185400 , Pressure Swi Part No.-3176000082 , Pressure Swi Part No.-3176000083 , Loudwhistle Part No.-3176000090 , Lightning Part No.-3176000101 , Position Lig Part No.-3176000102 , Flat Pin Sle Part No.-3176000103 , Diod Part No.-3176000114 , Light Emit. Dio Part No.-3176000116 , Light Diode Part No.-3176000117 , Relay Part No.-3176000120 , Flasher Part No.-3176000124 , Back Piece Part No.-3176000129 , Reverse Alar Part No.-3176000156 , Light Emit. Dio Part No.-3176000160 , Motstand Part No.-3176000267 , Fuse Con. Term. Part No.-3176000270 , End Plate Part No.-3176000271 , Contactor Part No.-3176000272 , Relay Part No.-3176000273 , Distance Piece Part No.-3176000384 , Connect. Cable Part No.-3176000385 , Rectifier Part No.-3176000386 , Cooling Flan Part No.-3176000387 , Coil Part No.-3176000391 , Aux. Contact Part No.-3176000392 , Can-Open Cable Part No.-3176000434 , Diode Plinth Part No.-3176000501 , Cable Str.-Way Part No.-3176000510 , Transformato Part No.-3176000524 , Diode Part No.-3176000526 , Circuit Brea Part No.-3176000535 , Min Circ Bre Part No.-3176000537 , Fuse Part No.-3176000539 , Light Emit D Part No.-3176000547 , Amperemeter Part No.-3176000554 , Plinth Part No.-3176000567 , Fuse Part No.-3176000568 , Marking Plat Part No.-3176000572 , Cable, 1-Core Part No.-3176000577 , Cable, 1-Core Part No.-3176000579 , Cable, 1-Core Part No.-3176000581 , Cable, 1-Core Part No.-3176000582 , Emerg. Stop Box Part No.-3176000600 , Control Box Part No.-3176000611 , Push-Button Part No.-3176000614 , Kabel Komple Part No.-3176000630 , Kabel Komple Part No.-3176000638 , Kabel Komple Part No.-3176000650 , Kabel Komple Part No.-3176000654 , Cable, 1-Core Part No.-3176000663 , Relay Socket Part No.-3176000664 , Junction Box Part No.-3176000668 , Connector Lo Part No.-3176000683 , Main Switch Part No.-3176000701 , Level Sensor Part No.-3222314335 , Shrinking Tub. Part No.-3176000708 , Seal Kit Part No.-3176000710 , Resistor Part No.-3176000717 , Fuse Part No.-3176000738 , Terminal Blo Part No.-3176000740 , Terminal Blo Part No.-3176000745 , Tidrela Part No.-3176000762 , Relay Module Part No.-3176000769 , Coil Part No.-3176000784 , Back Part Part No.-3176000794 , Back Part Part No.-3176000795 , Back Part Part No.-3176000799 , Signal Cable Part No.-3176000985 , Signal Cable Part No.-3176000991 , Signal Cable Part No.-3176000993 , Signal Cable Part No.-3176000994 , Signal Cable Part No.-3176000995 , Signal Cable Part No.-3176000996 , Signal Cable Part No.-3176000997 , Signal Cable Part No.-3176000998 , Signal Cable Part No.-3176000999 , Signal Cable Part No.-3176001001 , Signal Cable Part No.-3176001003 , Signal Cable Part No.-3176001004 , Signal Cable Part No.-3176001005 , Signal Cable Part No.-3176001006 , Signal Cable Part No.-3176001007 , Signal Cable Part No.-3176001009 , Signal Cable Part No.-3176001010 , Signal Cable Part No.-3176001011 , Signal Cable Part No.-3176001013 , Signal Cable Part No.-3176001014 , Signal Cable Part No.-3176001015 , Signal Cable Part No.-3176001016 , Signal Cable Part No.-3176001018 , Signal Cable Part No.-3176001027 , Signal Cable Part No.-3176001028 , Signal Cable Part No.-3176001030 , Signal Cable Part No.-3176001034 , Signal Cable Part No.-3176001046 , Signal Cable Part No.-3176001049 , Signal Cable Part No.-3176001063 , Signal Cable Part No.-3176001065 , Signal Cable Part No.-3176001067 , Signal Cable Part No.-3176001069 , Signal Cable Part No.-3176001071 , Signal Cable Part No.-3176001074 , Signal Cable Part No.-3176001075 , Signal Cable Part No.-3176001077 , Signal Cable Part No.-3176001078 , Signal Cable Part No.-3176001079 , Signal Cable Part No.-3176001080 , Signal Cable Part No.-3176001081 , Signal Cable Part No.-3176001083 , Signal Cable Part No.-3176001084 , Signal Cable Part No.-3176001085 , Signal Cable Part No.-3176001087 , Signal Cable Part No.-3176001088 , Signal Cable Part No.-3176001089 , Signal Cable Part No.-3176001091 , Signal Cable Part No.-3176001093 , Signal Cable Part No.-3176001094 , Signal Cable Part No.-3176001095 , Signal Cable Part No.-3176001110 , Signal Cable Part No.-3176001120 , Signal Cable Part No.-3176001127 , Signalkabel Part No.-3176001142 , Signal Cable Part No.-3176001143 , Signal Cable Part No.-3176001144 , Signal Cable Part No.-3176001149 , Signal Cable Part No.-3176001150 , Signal Cable Part No.-3176001152 , Signal Cable Part No.-3176001189 , Signal Cable Part No.-3176001190 , Signal Cable Part No.-3176001191 , Signal Cable Part No.-3176001193 , Connector Part No.-3176001208 , Light Emit. Part No.-3176003126 , Safetyrelay Part No.-3176001246 , Cable, 1-Core Part No.-3176001288 , Vacuum Switch Part No.-3176001299 , F136, Cable Part No.-3176001362 , Control Box Part No.-3176001463 , Emerg. Stop Box Part No.-3176001465 , Switch Part No.-3176001486 , Mount Part No.-3176001499 , Power Unit Part No.-3176001518 , Fuse Holder Part No.-3176001533 , Bridge Conn. Part No.-3176001597 , Plinth Module Part No.-3176001609 , Control Box Part No.-3176001622 , Control Box Part No.-3176001628 , Relay Part No.-3176001644 , Sleeve Part No.-3176001668 , Spotlight Part No.-3176001696 , Can-Open Cable Part No.-3176001733 , Signal Cable Part No.-3176001981 , Signal Cable Part No.-3176001985 , Signal Cable Part No.-3176001986 , Signal Cable Part No.-3176001987 , Signal Cable Part No.-3176001988 , Signal Cable Part No.-3176001989 , Signal Cable Part No.-3176001990 , Signal Cable Part No.-3176001991 , Signal Cable Part No.-3176001992 , Signal Cable Part No.-3176001996 , Main Cable Part No.-3176002073 , Main Cable Part No.-3176002074 , Power Supply Part No.-3176002076 , Main Cable Part No.-3176002077 , Main Cable Part No.-3176002099 , Holder Part No.-3176002111 , Min Circ Bre Part No.-3176002112 , Connector Part No.-3176002148 , Main Cable Part No.-3176002300 , Main Cable Part No.-3176002301 , Main Cable Part No.-3176002302 , Main Cable Part No.-3176002305 , Main Cable Part No.-3176002309 , Main Cable Part No.-3176002314 , Main Cable Part No.-3176002315 , Main Cable Part No.-3176002402 , Main Cable Part No.-3176002403 , Main Cable Part No.-3176002404 , Main Cable Part No.-3176002405 , Main Cable Part No.-3176002407 , Main Cable Part No.-3176002408 , Main Cable Part No.-3176002416 , Kabel Part No.-3176002513 , Signal Cable Part No.-3176002524 , Signalkabel Part No.-3176002575 , Hour Meter Part No.-3176002614 , Sensor Cable Part No.-3176002624 , Battery Switch Part No.-3176002697 , Drilled Box Part No.-3176002702 , Drilled Box Part No.-3176002704 , Main Switch Part No.-3176002830 , Circuit Breaker Part No.-3176002831 , Switch Part No.-3176002833 , Coil Part No.-3176002834 , Timing Relay Part No.-3176005973 , Pressure Switch Part No.-3176002910 , Plug Part No.-3176002932 , Protection Hose Part No.-3176002957 , Protection Hose Part No.-3176002958 , Protection Hose Part No.-3176002959 , Protection Hose Part No.-3176002961 , Protection Hose Part No.-3176002963 , Hose Coupling Part No.-3176002969 , Hose Coupling Part No.-3176002970 , Cable Complete Part No.-3176003017 , Temp.Sensor Part No.-3176003042 , Spotlight Part No.-3176003077 , Converter Part No.-3176003086 , Flasher Unit Part No.-3176003125 , Light Emit. Dio Part No.-3176003131 , Light Emit. Part No.-3176003132 , Light Emit. Dio Part No.-3176003133 , Timing Relay Part No.-3176003266 , Monitor Part No.-3176003460 , Holder Set Part No.-3176003462 , Timing Relay Part No.-3176003527 , Timing Relay Part No.-3176003528 , Attachment Part No.-3176003539 , Connector Part No.-3176003596 , Headlight Part No.-3176003688 , Headlight Part No.-3176003741 , Contact Sleeve Part No.-3176003747 , Safety Relay Part No.-3176004006 , Flash Light Part No.-3176004894 , Protection Hose Part No.-3176005031 , Protection Hose Part No.-3176005035 , Protection Hose Part No.-3176005038 , Adapter Part No.-3176005042 , Adapter Part No.-3176005043 , Adapter Part No.-3176005044 , Level Switch Part No.-3176006074 , Relay Part No.-3176005906 , Switch Part No.-3176005915 , Contact Block Part No.-3176005916 , Level Switch Part No.-3176005923 , Level Sensor Part No.-3176006074 , Camera Part No.-3176006092 , Cable, 1-Core Part No.-3176006125 , Nipple Part No.-3176006200 , Nipple Part No.-3176006300 , Signal Cable Part No.-3176006304 , Nipple Part No.-3176006400 , Nipple Part No.-3176006500 , Nipple Part No.-3176016600 , Nipple Part No.-3176016700 , Nipple Part No.-3176052900 , Contactor Part No.-3176100304 , Nipple Part No.-3176127100 , Nipple Part No.-3176130000 , Hexagon Nipple Part No.-3176130100 , Nippel Part No.-3176147200 , Nipple Part No.-3176150900 , Nipple Part No.-3176151000 , Nipple Part No.-3176152200 , Nipple Part No.-3176152300 , Nipple Part No.-3176152400 , Nipple Part No.-3176158600 , Nipple Part No.-3176167100 , Nipple Part No.-3176167200 , Pr.Regulator Part No.-3176185600 , Pr. Regulato Part No.-3176185601 , Air Hose Part No.-3176187801 , Nipple Part No.-3176190000 , Nipple Part No.-3176190100 , Nippel Part No.-3176194200 , Nipple Part No.-3176194300 , Nipple Part No.-3176194400 , Nipple Part No.-3176194500 , Nipple Part No.-3176194600 , Nipple Part No.-3176194700 , Nipple Part No.-3176194800 , Nipple Part No.-3176194900 , Coupling Part No.-3176205207 , Coupling Part No.-3176205211 , Sleeve Part No.-3176205225 , Connect. Plate Part No.-3176205300 , Nippel Part No.-3176213100 , Nippel Part No.-3176227900 , Nipple Part No.-3176264400 , Nipple Part No.-3176264500 , Bushing Part No.-3176270300 , Pr.Rel.Valve Part No.-3176271100 , Bushing Part No.-3176275700 , Nipple Part No.-3176278600 , Bushing Part No.-3176279600 , Nipple Part No.-3176280900 , Nipple Part No.-3176282100 , Nipple Part No.-3176290400 , Nipple Part No.-3176292900 , Cap Nut Part No.-3176293000 , Nipple Part No.-3176293200 , Return Block Part No.-3176293510 , O-Ring Part No.-3176299400 , Nipple Part No.-3176303100 , Nipple Part No.-3176303200 , Nipple Part No.-3176303500 , Nipple Part No.-3176303600 , Nipple Part No.-3176303700 , Nipple Part No.-3176304000 , Nipple Part No.-3176304200 , Pipe Coupling Part No.-3176304580 , Pipe Coupling Part No.-3176304880 , Pipe Coupling Part No.-3176304980 , Nipple Part No.-3176305000 , Nipple Part No.-3176305100 , Nipple Part No.-3176305200 , Nipple Part No.-3176305300 , Nippel Part No.-3176306000 , Ball Valve Part No.-3176313800 , Siltrumma Part No.-3176352300 , Sil Part No.-3176352380 , Nipple Part No.-3176355500 , Nippel Part No.-3176355600 , U-Bolt Part No.-3176360400 , Bagageband Part No.-3176368100 , Hydraulic Ho Part No.-3176373300 , Nipple Part No.-3176382800 , Nipple Part No.-3176382900 , Kopplingsplint Part No.-3176404900 , Ändplatta Part No.-3176404901 , Bridge Conn. Part No.-3176404902 , Terminal Blo Part No.-3176404903 , Terminal Blo Part No.-3176404904 , End Plate Part No.-3176404905 , Terminal Block Part No.-3176404906 , Terminal Blo Part No.-3176404907 , Termial Bloc Part No.-3176404908 , End Plate Part No.-3176404909 , Kopplingsplint Part No.-3176404911 , Ändplatta Part No.-3176404912 , Bridge Conn. Part No.-3176404913 , Terminal Blo Part No.-3176404915 , End Plate Part No.-3176404916 , Fuse Con. Te Part No.-3176404918 , Terminal Blo Part No.-3176404920 , End Plate Part No.-3176404921 , Bridge Conn Part No.-3176404925 , Terminal Blo Part No.-3176404926 , Terminal Block Part No.-3176404927 , End Plate Part No.-3176404928 , Kopplingsplint Part No.-3176404930 , Kopplingsplint Part No.-3176404932 , Bridge Conn. Part No.-3176404934 , Terminal Blo Part No.-3176404935 , Ändplatta Part No.-3176404938 , Terminal Blo Part No.-3176404940 , End Support Part No.-3176404950 , Ändstöd Part No.-3176404951 , End Support Part No.-3176404952 , Marking Plat Part No.-3176404961 , Marking Plat Part No.-3176404962 , Marking Plat Part No.-3176404963 , Marking Plat Part No.-3176404964 , Marking Plat Part No.-3176404965 , Marking Plat Part No.-3176404966 , Marking Plate Part No.-3176404967 , Marking Plat Part No.-3176404968 , Marking Plat Part No.-3176404975 , Marking Plate Part No.-3176404989 , Marking Plat Part No.-3176404990 , Marking Plat Part No.-3176404991 , Marking Plate Part No.-3176404996 , Diod Part No.-3176410800 , Relä Part No.-3176413000 , Fuse Part No.-3176415600 , Bulb Part No.-3176415800 , Glow Lamp Part No.-3176416410 , Cable Gland Part No.-3176422132 , Bulb Part No.-3176424501 , Automatsäkring Part No.-3176425801 , Relay Part No.-3176426006 , Relay Part No.-3176426007 , Relay Part No.-3176426008 , Relay Part No.-3176426009 , Relä Part No.-3176426101 , Relay Part No.-3176426102 , Reläsockel Part No.-3176426200 , Vibr.Damper Part No.-3176428100 , Socket Outle Part No.-3176428514 , Circ.Closer Part No.-3176428800 , Halogen Lamp Part No.-3176430301 , El-Motor Part No.-3176431104 , El-Motor Part No.-3176431108 , El-Motor Part No.-3176431207 , El. Motor Part No.-3176431211 , El-Motor Part No.-3176431302 , El-Motor Part No.-3176431310 , El-Motor Part No.-3176431314 , Mincircbreak Part No.-3176432204 , Circuit Brea Part No.-3176432252 , Reläsockel Part No.-3176432402 , Capacitor Part No.-3176432502 , Capacitor Part No.-3176432503 , Diode Unit Part No.-3176432601 , Likriktare Part No.-3176432903 , Likriktare Part No.-3176432905 , Cool.Flange Part No.-3176432930 , Bellows Part No.-3176434102 , Dipper Part No.-3176434106 , Contact Bloc Part No.-3176434107 , Controller Part No.-3176434120 , Sleeve Dev. Part No.-3176434302 , Cover Part No.-3176434303 , Pin Insert Part No.-3176434402 , Cover Part No.-3176434403 , Term.Block Part No.-3176436201 , Mounting Rail Part No.-3176436308 , Relay Socket Part No.-3176437002 , Diode Unit Part No.-3176437201 , Fuse Part No.-3176439400 , Socket Outlet Part No.-3176442207 , Mark.Plate Part No.-3176449101 , Mark.Plate Part No.-3176449103 , Marking Plate Part No.-3176449104 , Marking Plate Part No.-3176449105 , Mark.Plate Part No.-3176449106 , Terminal Blo Part No.-3176449150 , Automatsäkring Part No.-3176449201 , Automatsäkring Part No.-3176449202 , Automatsäkring Part No.-3176449203 , Automatsäkring Part No.-3176449204 , M.Circ Break Part No.-3176449206 , M.Circ.Break Part No.-3176449207 , Circuit Brea Part No.-3176449212 , Circuit Brea Part No.-3176449214 , Min Cirk. Br Part No.-3176449215 , M.Circ. Brea Part No.-3176449221 , Bulb Part No.-3176449400 , Transformer Part No.-3176450524 , Transformer Part No.-3176450525 , Transformer Part No.-3176450527 , Transformer Part No.-3176450538 , Transformer Part No.-3176450560 , Transformer Part No.-3176450561 , Earthfaultre Part No.-3176450603 , Earthfaultre Part No.-3176450605 , Ignit.Lock Part No.-3176451100 , Level Switch Part No.-3176453102 , Level Switch Part No.-3176453103 , Level Switch Part No.-3176453104 , Level Switch Part No.-3176453105 , Level Guard Part No.-3176453106 , Joy Stick Part No.-3176455602 , Socket Outle Part No.-3176456803 , Plate Part No.-3176457602 , Gasket Part No.-3176457603 , Press.Guard Part No.-3176458901 , Press.Guard Part No.-3176458904 , Press Switch Part No.-3176458905 , Pressure Swi Part No.-3176458906 , Limit Swich Part No.-3176462210 , Limit Switch Part No.-3176462230 , Branch Conta Part No.-3176464438 , Nipple Part No.-3176500000 , Nipple Part No.-3176501800 , U-Bolt Part No.-3176511100 , Slangledning Part No.-3176522000 , Slangledning Part No.-3176522100 , Valve Part No.-3176523300 , Strainer Part No.-3176530980 , Cap Part No.-3176531300 , Regulator Part No.-3176534300 , Strain.Drum Part No.-3176535100 , Strainer Part No.-3176535180 , Damper Part No.-3176540900 , Direct.Valve Part No.-3176541681 , Nippel Part No.-3176542700 , Nippel Part No.-3176542800 , Cap Part No.-3176542900 , Assembly Strip Part No.-3176547504 , Nippel Part No.-3176553500 , Direct.Valve Part No.-3176553880 , Direction Va Part No.-3176553882 , Direction Va Part No.-3176553883 , Plug Part No.-3176556300 , U-Bolt Part No.-3176558810 , Slangledning Part No.-3176567000 , Slangledning Part No.-3176567900 , Slangledning Part No.-3176568000 , Slangledning Part No.-3176568100 , Slangledning Part No.-3176568500 , Slangledning Part No.-3176568700 , O-Ring Part No.-3176593800 , Valve Part No.-3176595800 , Gauge Part No.-3176601900 , Press.Gauge Part No.-3176602000 , Gauge Part No.-3176602200 , Nipple Part No.-3176603600 , Nipple Part No.-3176603700 , Nippel Part No.-3176603900 , Plate Part No.-3176610000 , Plate Part No.-3176610100 , Plate Part No.-3176612600 , Nipple Part No.-3176630100 , Slangledning Part No.-3176633600 , Nippel Part No.-3176634400 , Nippel Part No.-3176634800 , Nipple Part No.-3176634900 , Nippel Part No.-3176635100 , Nipple Part No.-3176635200 , Nipple Part No.-3176635300 , Nipple Part No.-3176648300 , Slangledning Part No.-3176648600 , Nippel Part No.-3176649500 , Nipple Part No.-3176649600 , Nipple Part No.-3176649700 , Nipple Part No.-3176649800 , Nippel Part No.-3176649900 , Nipple Part No.-3176650000 , Nippel Part No.-3176650100 , Nippel Part No.-3176650200 , Nipple Part No.-3176650300 , Nippel Part No.-3176650400 , Nippel Part No.-3176650500 , Nipple Part No.-3176650600 , Nipple Part No.-3176650700 , Nipple Part No.-3176650800 , Nippel Part No.-3176650900 , Nipple Part No.-3176651000 , Nippel Part No.-3176651100 , Nipple Part No.-3176651200 , Nippel Part No.-3176651300 , Nipple Part No.-3176651400 , Nipple Part No.-3176651500 , Nipple Part No.-3176651600 , Nipple Part No.-3176651700 , Nipple Part No.-3176651800 , Nipple Part No.-3176651900 , Nipple Part No.-3176652000 , Nipple Part No.-3176652100 , Nipple Part No.-3176652200 , Nipple Part No.-3176652300 , Nipple Part No.-3176652400 , Nipple Part No.-3176652500 , Nipple Part No.-3176652600 , Nipple Part No.-3176652700 , Nipple Part No.-3176652800 , Nipple Part No.-3176652900 , Nipple Part No.-3176653000 , Nipple Part No.-3176653100 , Nipple Part No.-3176653200 , Nipple Part No.-3176653300 , Nipple Part No.-3176653400 , Nippel Part No.-3176653500 , Nipple Part No.-3176653600 , Nipple Part No.-3176653700 , Nipple Part No.-3176653900 , Nippel Part No.-3176654000 , Nipple Part No.-3176654200 , Nipple Part No.-3176654300 , Nipple Part No.-3176654400 , Nipple Part No.-3176654700 , Nipple Part No.-3176654800 , Nippel Part No.-3176654900 , Elbow Part No.-3176655000 , Elbow Part No.-3176655100 , Nippel Part No.-3176655200 , Nipple Part No.-3176655300 , Nipple Part No.-3176655400 , Nipple Part No.-3176655500 , Nipple Part No.-3176655600 , Nipple Part No.-3176655700 , Nipple Part No.-3176655800 , Nipple Part No.-3176655900 , Nippel Part No.-3176656000 , Nipple Part No.-3176656100 , Nipple Part No.-3176656200 , Nipple Part No.-3176656300 , Nippel Part No.-3176656400 , Nipple Part No.-3176656500 , Nippel Part No.-3176656600 , Nippel Part No.-3176656700 , Nipple Part No.-3176656800 , Nipple Part No.-3176656900 , Nipple Part No.-3176657000 , Elbow Part No.-3176657100 , Nipple Part No.-3176657200 , Nipple Part No.-3176657300 , Nipple Part No.-3176657400 , Nipple Part No.-3176657500 , Nippel Part No.-3176657600 , Nipple Part No.-3176657700 , Nipple Part No.-3176657800 , Nipple Part No.-3176657900 , Nipple Part No.-3176658000 , Nipple Part No.-3176658100 , Nipple Part No.-3176658200 , Nipple Part No.-3176658300 , Nipple Part No.-3176658400 , Nipple Part No.-3176658500 , Nipple Part No.-3176658600 , Nipple Part No.-3176658700 , Nipple Part No.-3176658800 , Nipple Part No.-3176658900 , Nippel Part No.-3176659000 , Nipple Part No.-3176659100 , Nipple Part No.-3176659200 , Nipple Part No.-3176659300 , Nipple Part No.-3176659400 , Nipple Part No.-3176659500 , Nipple Part No.-3176659600 , Nipple Part No.-3176659700 , Nipple Part No.-3176659800 , Nipple Part No.-3176659900 , Nipple Part No.-3176660000 , Nipple Part No.-3176660100 , Nipple Part No.-3176660200 , Nipple Part No.-3176660300 , Nipple Part No.-3176660400 , Nipple Part No.-3176660500 , Nipple Part No.-3176661200 , Cap Nut Part No.-3176661300 , Cap Nut Part No.-3176661400 , Cap Nut Part No.-3176661500 , Cap Nut Part No.-3176661600 , Cap Nut Part No.-3176661800 , Nipple Part No.-3176661900 , Nipple Part No.-3176662000 , Nipple Part No.-3176663300 , Nipple Part No.-3176663400 , Nipple Part No.-3176663500 , Nipple Part No.-3176663600 , Nipple Part No.-3176663700 , Nipple Part No.-3176663800 , Nipple Part No.-3176663900 , Nipple Part No.-3176664000 , Nipple Part No.-3176664100 , Nipple Part No.-3176664200 , Nipple Part No.-3176664300 , Nipple Part No.-3176664400 , Nipple Part No.-3176664500 , Nippel Part No.-3176664600 , Nipple Part No.-3176664700 , Nipple Part No.-3176664800 , Nipple Part No.-3176664900 , Nipple Part No.-3176665000 , Nipple Part No.-3176665100 , Nipple Part No.-3176665200 , Nipple Part No.-3176665300 , Nipple Part No.-3176665400 , Nipple Part No.-3176665500 , Nipple Part No.-3176665600 , Nipple Part No.-3176665700 , Nipple Part No.-3176665800 , Nipple Part No.-3176665900 , Nipple Part No.-3176666000 , Nipple Part No.-3176666100 , Nipple Part No.-3176666200 , Nipple Part No.-3176666300 , Nipple Part No.-3176666400 , Nipple Part No.-3176666500 , Nipple Part No.-3176666600 , Nipple Part No.-3176666800 , Nipple Part No.-3176666900 , Nipple Part No.-3176667000 , Nipple Part No.-3176667100 , Nipple Part No.-3176667200 , Nipple Part No.-3176667300 , Nipple Part No.-3176667400 , Nipple Part No.-3176667500 , Nipple Part No.-3176667600 , Nipple Part No.-3176667700 , Nipple Part No.-3176667800 , Nipple Part No.-3176667900 , Nipple Part No.-3176668000 , Nipple Part No.-3176668100 , Nipple Part No.-3176668200 , Nipple Part No.-3176668300 , Nipple Part No.-3176668400 , Nipple Part No.-3176668700 , Nipple Part No.-3176669000 , Nipple Part No.-3176669100 , Nipple Part No.-3176669200 , Nipple Part No.-3176669300 , Nipple Part No.-3176669400 , Nipple Part No.-3176669500 , Nipple Part No.-3176669600 , Nipple Part No.-3176669700 , Plug Part No.-3176669800 , Plug Part No.-3176669900 , Plug Part No.-3176670000 , Cap Part No.-3176670100 , Cap Part No.-3176670200 , Cap Part No.-3176670300 , Nipple Part No.-3176670800 , Flange Half Part No.-3176672300 , Cap Nut Part No.-3176678700 , Cap Nut Part No.-3176678800 , Strainer Part No.-3176679680 , Slangledning Part No.-3176685400 , Slangledning Part No.-3176685900 , Slangledning Part No.-3176686100 , Pr.Rel.Valve Part No.-3176696600 , Slangledning Part No.-3176697500 , Nipple Part No.-3176698100 , Nipple Part No.-3176698300 , Nipple Part No.-3176705800 , Nipple Part No.-3176707100 , Solen.Valve Part No.-3176710200 , Slangledning Part No.-3176713100 , Slangledning Part No.-3176718600 , Oil Cooler Part No.-3176718800 , Gasket Part No.-3176718803 , Gasket Part No.-3176718804 , Needle Valve Part No.-3176720800 , Nipple Part No.-3176730400 , Level Part No.-3176730900 , Nipple Part No.-3176731900 , Nippel Part No.-3176733600 , Nippel Part No.-3176733700 , Nipple Part No.-3176733800 , Nipple Part No.-3176733900 , Nipple Part No.-3176734000 , Nipple Part No.-3176734100 , Nipple Part No.-3176734200 , Bushing Part No.-3176735300 , Bushing Part No.-3176735500 , U-Bolt Part No.-3176735800 , U-Bolt Part No.-3176736800 , U-Bolt Part No.-3176738100 , Slangledning Part No.-3176744900 , Slangledning Part No.-3176745700 , Plate Part No.-3176757000 , Plate Part No.-3176757200 , Plate Part No.-3176757301 , Plate Part No.-3176757302 , Plate Part No.-3176757400 , Plate Part No.-3176757500 , Plastic Hose Part No.-3176760600 , Slangledning Part No.-3176764400 , Slangledning Part No.-3176766200 , Slangledning Part No.-3176766500 , Nipple Part No.-3176770300 , Nippel Part No.-3176770700 , Bushing Part No.-3176771400 , Nipple Part No.-3176775700 , Nipple Part No.-3176776700 , Nipple Part No.-3176785100 , Plug Part No.-3176786803 , Plug Part No.-3176786806 , Plug Part No.-3176786807 , Elbow Nipple Part No.-3176787200 , Nipple Part No.-3176787300 , Spring Part No.-3176787583 , Hydraulic Mo Part No.-3176788914 , Repair Kit Part No.-3176788915 , Bearing Set Part No.-3176788916 , Flange Half Part No.-3176792200 , Restriction Part No.-3176793700 , Nipple Part No.-3176796800 , Nipple Part No.-3176796900 , Nipple Part No.-3176797000 , Nipple Part No.-3176802600 , Nipple Part No.-3176802700 , Nipple Part No.-3176802800 , Cap Part No.-3176802900 , Nipple Part No.-3176804300 , Nipple Part No.-3176807600 , Nipple Part No.-3176807700 , Nipple Part No.-3176807800 , Nipple Part No.-3176812000 , Restrict.Set Part No.-3176814994 , Valve Cone Part No.-3176815300 , Nipple Part No.-3176825100 , F.Cont.Valve Part No.-3176826400 , Flow Cont.Valve Part No.-3176826401 , Flow Cont.Valve Part No.-3176826410 , Kabelstrumpa Part No.-3176826600 , Wire Me.Hose Part No.-3176826700 , Wire Me.Hose Part No.-3176826712 , Nipple Part No.-3176827000 , Nipple Part No.-3176827100 , Plug Part No.-3176828900 , Nipple Part No.-3176829200 , Shuttle Valve Part No.-3176837700 , Nipple Part No.-3176840200 , Nipple Part No.-3176842400 , Backventil Part No.-0823005018 , Nippel Part No.-3176848900 , Coupl.Half Part No.-3176850290 , Restriction Part No.-3176850500 , Plastic Hose Part No.-3176855500 , Seal Kit Part No.-3176864101 , Flow Guard Part No.-3176867000 , Micro Switch Part No.-3176867011 , Spare P.Set Part No.-3176867090 , Reduc.Valve Part No.-3176868100 , Press.Gauge Part No.-3176869500 , Gasket Part No.-3176871300 , Water Valve Part No.-3176879140 , Shut Off Valve Part No.-3176879150 , Nipple Part No.-3176887200 , Hydraulic Ho Part No.-3176888000 , Nipple Part No.-3176892700 , Nipple Part No.-3176897200 , Nipple Part No.-3176897300 , Backventil Part No.-0823005019 , Ampere Meter Part No.-3176913901 , Press.Guard Part No.-3176959602 , Spool Valve Part No.-3177000038 , Spool Valve Part No.-3177000040 , Seal Kit Part No.-3177000047 , Fan Part No.-6060007482 , Spring Set Part No.-3177000093 , Spring Set Part No.-3177000094 , Piston Set Part No.-3177000095 , Shaft Part No.-3177000096 , Sealing Set Part No.-3177000103 , Repair Kit Part No.-3177000158 , Spring Part No.-3177000167 , Disc Part No.-3177000168 , Disc Part No.-3177000169 , Bearing Part No.-3177000170 , Bend Part No.-3177000182 , Stud Part No.-3177000185 , Seal Part No.-3177000204 , O-Ring Part No.-3177000205 , Nut Part No.-3177000206 , Washer Part No.-3177000210 , O-Ring Part No.-3177000211 , Oil Plug Part No.-3177000217 , Gasket Part No.-3177000218 , Clamp Part No.-3177001100 , Disc Part No.-3177001301 , Roller Part No.-3177006001 , Guide Roller Part No.-3177006002 , Bearing Bushing Part No.-3177007400 , Bearing Bushing Part No.-3177007401 , Ecc. Latch Part No.-3177007403 , Crossing Nipple Part No.-3177007413 , Nipple Part No.-3177301200 , Coupling Part No.-3177301600 , Coupling Part No.-3177301601 , Bellow Part No.-3177302335 , Nipple Part No.-3177302500 , Press.Gauge Part No.-3177303200 , Pr.Red.Valve Part No.-3177303600 , Hydraulic Mo Part No.-3177303803 , Solenoid Part No.-3177303804 , Direct.Valve Part No.-3177304200 , Direct.Valve Part No.-3177304300 , Nipple Part No.-3177304500 , Nippel Part No.-3177304600 , Nipple Part No.-3177305400 , Valve Part No.-3177306000 , Nipple Part No.-3177306300 , Nipple Part No.-3177306400 , Nippel Part No.-3177306800 , Nipple Part No.-3177307000 , Hydr.Motor Part No.-3177307200 , Flange Part No.-3177307301 , Flange Part No.-3177307306 , Assembly Plate Part No.-3177307700 , Hydraulic Mo Part No.-3177307800 , Seal Kit Part No.-3177308002 , Hydraulmotor Part No.-3177308100 , Needle Valve Part No.-3177309010 , Direction Valve Part No.-3177309209 , Valve, Direc Part No.-3177309210 , Direct.Valve Part No.-3177309245 , Coil Part No.-6060002411 , Seal Kit Part No.-3177309253 , Nut Set Part No.-3177309254 , Coil Part No.-3177309255 , Valve, Direc Part No.-3177309260 , Seal Kit Part No.-3177309262 , Coil Part No.-3177309264 , Direction Va Part No.-3177309270 , Direction Va Part No.-3177309271 , Direction Va Part No.-3177309280 , Direction Va Part No.-3177309281 , Direction Va Part No.-3177309282 , Direction Va Part No.-3177309283 , Direction Va Part No.-3177309284 , Directional Valve Part No.-3177309288 , Direction Va Part No.-3177309289 , Nipple Part No.-3177309500 , Nipple Part No.-3177310700 , Blind Plate Part No.-3177311100 , F.Cont.Valve Part No.-3177312603 , Nipple Part No.-3177313200 , Nipple Part No.-3177313600 , Gauge Part No.-3177314700 , Direct.Valve Part No.-3177315605 , Direct.Valve Part No.-3177315607 , Direct.Valve Part No.-3177315608 , O-Ring Set Part No.-3177315790 , Direct.Valve Part No.-3177316510 , Seal Kit Part No.-3177316511 , Pr.Rel.Valve Part No.-3177317301 , Pr.Rel.Valve Part No.-3177317302 , Nipple Part No.-3177319000 , Nipple Part No.-3177319500 , Cap Part No.-3177319700 , Drain.Valve Part No.-3177501000 , Press.Gauge Part No.-3177502000 , Gauge Part No.-3177502100 , Gauge Part No.-3177502900 , Press.Gauge Part No.-3177503100 , Ball Cock Part No.-3177504800 , Press.Guard Part No.-3177700102 , Press.Guard Part No.-3177700105 , Manipulator Part No.-3177701700 , Connector Part No.-3177702313 , Sleeve Inser Part No.-3177702407 , Connector Part No.-3177702412 , Housing Part No.-3177702413 , Housing Part No.-3177702420 , Press.Guard Part No.-3186027901 , Mounting Rail Part No.-3214018100 , Pressure Switch Part No.-3214403300 , Flange Connect. Part No.-3214440100 , Switch Part No.-3214512700 , Double Ch.Valve Part No.-3214739100 , Flödesregulator Part No.-3214766981 , Seal Kit Part No.-3214767592 , Disk Part No.-3214779000 , Press.Red.Valve Part No.-3214871280 , Plug Part No.-3214871282 , Spring Part No.-3214871283 , Seal Kit Part No.-3214871287 , View Mirror Part No.-3214873401 , Arm Part No.-3214873402 , Direct.Valve Part No.-3214897280 , Direction Valve Part No.-3214897380 , Direction Va Part No.-3214897382 , Direction Valve Part No.-3214897480 , Plate Part No.-3214923400 , Sealing Set Part No.-3215234760 , Washer Part No.-3215511200 , Eye Ring Part No.-3215609400 , Drum Part No.-3215752100 , Bolt Part No.-3215752112 , Press.Red.Valve Part No.-3215959500 , Attachment Part No.-3215959510 , Fuse Part No.-3216153100 , Relay Part No.-3216178300 , Pr.Reg.Valve Part No.-3216346680 , Repair Kit Part No.-3216346690 , Clamp Part No.-3216355600 , Clamp Part No.-3216493600 , Saftey Cartr Part No.-3216523800 , Gasket Part No.-3216529500 , Stop Solenoi Part No.-3216853300 , Pr.Rel.Valve Part No.-3216917080 , Oljefilter Part No.-6060011415 , Protection Part No.-3216986500 , Push Button Part No.-3217000008 , Indicat. Lam Part No.-3217000009 , Ind. Lamp Part No.-3217000010 , Touch Guard Part No.-3217000032 , Push Button Part No.-3217000034 , Grate Part No.-3217000036 , Distance Pie Part No.-3217000040 , Cable Str.-Way Part No.-3217000146 , Cable Str.-Way Part No.-3217000147 , Cable Str.-Way Part No.-3217000148 , Cable Seal Part No.-3217000149 , Resistor Part No.-3217000306 , Cable, 1-Core Part No.-3217000339 , Fuse Part No.-3217000354 , Lamp Pushbut Part No.-3217000375 , Push Button Part No.-3217000377 , Push Button Part No.-3217000379 , Overload Rel Part No.-3217000407 , Alarm Pushbu Part No.-3217000411 , Therm. Prot Part No.-3217000420 , Trigger Part No.-3217000445 , Connection S Part No.-3217000451 , Main Switch Part No.-3217000460 , Circuit Brea Part No.-3217000461 , Circuit Brea Part No.-3217000467 , Switch Part No.-3217000508 , Palm Grip Part No.-3217000552 , Coil Part No.-3217000553 , Circuit Brea Part No.-3217000556 , Main Switch Part No.-3217000557 , Circuit Brea Part No.-3217000558 , Main Switch Part No.-3217000559 , Circuit Brea Part No.-3217000560 , Touch Guard Part No.-3217000567 , Plinth Module Part No.-3217000600 , Pressure Swi Part No.-3217000621 , Trigger Part No.-3217001002 , Trigger Part No.-3217001003 , Trigger Part No.-3217001004 , Trigger Part No.-3217001006 , Control Switch Part No.-3217001011 , Palm Grip Part No.-3217001012 , Palm Grip Part No.-3217001016 , Palm Grip Part No.-3217001020 , Palm Grip Part No.-3217001022 , Palm Grip Part No.-3217001023 , Palm Grip Part No.-3217001029 , Palm Grip Part No.-3217001030 , Palm Grip Part No.-3217001031 , Lamppushbutt Part No.-3217001041 , Lamppushbutt Part No.-3217001042 , Lamppushbutt Part No.-3217001043 , Lamp Calotte Part No.-3217001045 , Lamp Calotte Part No.-3217001047 , Key Switch Part No.-3217001049 , Lamp Insert Part No.-3217001057 , Lamp Insert Part No.-3217001058 , Lamp Insert Part No.-3217001059 , Lamp Insert Part No.-3217001061 , Lamp Insert Part No.-3217001063 , Intermed. Pa Part No.-3217001072 , Contact Bloc Part No.-3217001073 , Sealing Cove Part No.-3217001075 , Protection R Part No.-3217001076 , Mushroom But Part No.-3217001079 , Mush. Button Part No.-3217001081 , Mush. Button Part No.-3217001082 , Emerg. Stop Box Part No.-3217001085 , Mushroom Pus Part No.-3217001087 , Lamppushbutt Part No.-3217001090 , Sealing Cove Part No.-3217001106 , Mushr. Butto Part No.-3217001107 , Base Box Part No.-3217001111 , Contact Block Part No.-3217001113 , Push Buttom Part No.-3217001200 , Push Button Part No.-3217001201 , Switch Part No.-3217001203 , Switch Part No.-3217001204 , Indicationl Part No.-3217001205 , Push Button Part No.-3217001206 , Push Button Part No.-3217001207 , Lamppushbutt Part No.-3217001209 , Switch Part No.-3217001211 , Switch Part No.-3217001212 , Switch Part No.-3217001214 , Switch Part No.-3217001222 , Lamppushbutt Part No.-3217001227 , Mushroom Pus Part No.-3217001235 , Pushbutton Part No.-3217001238 , Switch Part No.-3217001239 , Switch Part No.-3217001240 , Palm Grip Part No.-3217001241 , Switch Part No.-3217001242 , Switch Part No.-3217001243 , Switch Part No.-3217001245 , Lampswitch Part No.-3217001247 , Lamp Switch Part No.-3217001250 , Switch Part No.-3217001257 , Push Button Part No.-3217001258 , Mushroom Pus Part No.-3217001259 , Lampvred Part No.-3217001261 , Lamp Push Bu Part No.-3217001262 , Mushroom Pus Part No.-3217001283 , Holder Part No.-3217034700 , Key Part No.-3217144600 , Bushing Part No.-3217301600 , Schackel Part No.-3217312400 , Hyd.Cylinder Part No.-3217327910 , Handle Part No.-3217383900 , Holder Part No.-3217384180 , Chain Part No.-3217385000 , Stödring Part No.-3217390908 , Kil Part No.-3217390909 , Snäckhjul Part No.-3217390910 , Skiva Part No.-3217390911 , Fjäder Part No.-3217390912 , Hållare Part No.-3217390913 , Mutter Part No.-3217390914 , Oil Plug Part No.-3217390919 , Bushing Part No.-3217390921 , Key Part No.-3217390922 , Seal Ring Part No.-3217390923 , Snäckhjulsaxel Part No.-3217390925 , Cover Part No.-3217390929 , Seal.Ring Part No.-3217390930 , Cover Part No.-3217390934 , Sealing Part No.-6060000247 , Gear Housing Part No.-3217390980 , Sealing Set Part No.-3217390982 , Friction Kit Part No.-3217390983 , Stand Frame Part No.-3217390984 , Bearing Kit Part No.-6060006027 , Seal Ring Part No.-3217391024 , Seal Ring Part No.-3217391035 , Insul Ring Part No.-3217391205 , Insulating Ring Part No.-3217391206 , Insul Ring Part No.-3217391214 , Bygel Part No.-3217391253 , Flange Part No.-3217391254 , Insu.Bracket Part No.-3217391255 , Hydr. Unit Part No.-3217391381 , Support Part No.-3217392101 , Back-Up Ring Part No.-3217929617 , Nut Part No.-3217392109 , Tube Part No.-3217392111 , Pipe Part No.-3217392113 , Swivel Part No.-3217392180 , Gear Housing Part No.-3217492600 , Cover Part No.-3217492601 , Seal Ring Part No.-3217492602 , Frict.Disc Part No.-3217492607 , Support Ring Part No.-3217492608 , Worm Wheel Part No.-3217492610 , Frict.Disc Part No.-3217492611 , Spring Part No.-3217492612 , Worm Shaft Part No.-3217492625 , Rear Cover Part No.-3217492634 , Seal Ring Part No.-3217492635 , Emerg.Valve Part No.-3217552780 , Protect. Shield Part No.-3217559704 , Wheel Part No.-3217559801 , Wheel Part No.-3217559802 , Wheel Part No.-3217559804 , Drum Part No.-3217559880 , Flange Part No.-3217559901 , Attachment Part No.-3217560207 , Brush Holder Part No.-3217560232 , Breaker Part No.-3217560237 , Gasket Part No.-3217560800 , U-Bolt Part No.-3217562000 , Gasket Part No.-3217564000 , Attachment Part No.-3217597700 , Vibr.Damper Part No.-3217604701 , Vibr.Damper Part No.-3217604702 , Nipple Part No.-3217614800 , Adapter Part No.-3217620500 , Nipple Part No.-3217621800 , Inner Tube Part No.-3217624647 , Lock Sheet Part No.-3217635900 , Angle Bracket Part No.-3217650801 , Restriction Part No.-3217651201 , Resctriction Part No.-3217651203 , Restriction Part No.-3217651301 , Restriction Part No.-3217651302 , Restriction Part No.-3217651303 , Control Box Part No.-3217651478 , Pipe Part No.-3217661300 , Axel Part No.-3217681400 , Screw Part No.-3217699300 , Oilreservoir Part No.-3217740300 , Cover Part No.-3217740301 , Compl Oilres Part No.-3217740380 , Slangnippel Part No.-3217747110 , Air Oil Cool Part No.-3217751103 , Air Oil Cool Part No.-3217751111 , Oil Cooler Part No.-3217751127 , A-W.Cooler Part No.-3217751143 , Air Oil Cool Part No.-3217751147 , Air Oil Cool Part No.-3217751152 , Air Oil Cool Part No.-3217751160 , Thermostat Part No.-3217751165 , Air Oil Cool Part No.-3217751176 , Fan Part No.-3217751179 , Fan Part No.-3217751181 , Slangnippel Part No.-3217759210 , Pin Part No.-3217763200 , Cover Part No.-3217763400 , Chuck Part No.-3217763480 , Nylon Pipe Part No.-3217781900 , Direction Va Part No.-3217786404 , Magnet Part No.-3217786454 , Tatningssats Part No.-3217786455 , Plate Part No.-3217786600 , Flange Part No.-3217791400 , Thermostat Part No.-3217799201 , Thermostat Part No.-3217799202 , Protect. Cap Part No.-3217799210 , Thermostat Part No.-3217799281 , Thermostat Part No.-3217799282 , Sequen.Valve Part No.-3217801401 , Sequen.Valve Part No.-3217801402 , Sequen.Valve Part No.-3217801403 , Nippel Part No.-3217804930 , Press.Rel.Ca Part No.-3217807652 , Flow Divider Part No.-3217815302 , Cartridge Part No.-3217815303 , Seal Kit Part No.-3217815304 , Conden. Unit Part No.-3217820226 , Pin Insert Part No.-3217826600 , Sleeve Ins. Part No.-3217826700 , Pin Insert Part No.-3217826800 , Socket Inser Part No.-3217826900 , Pin Part No.-3217827700 , Pin Part No.-3217827702 , Guide Sleeve Part No.-3217827710 , Guide Pin Part No.-3217827711 , Socket Part No.-3217827800 , Reducer Part No.-3217836200 , Pin Insert Part No.-3217839900 , Insert Part No.-3217840000 , Frame Part No.-3217840200 , Sleeve Part No.-3217840300 , Watermistset Part No.-3217847101 , Direct.Valve Part No.-3217848301 , Seal Kit Part No.-3217848303 , Cover Part No.-3217852404 , Hydraulic Pu Part No.-3217852500 , Shaft Coupl. Part No.-3217852501 , Interm. Ring Part No.-3217852502 , Shaft Coupli Part No.-3217852503 , Axelkoppling Part No.-3217852504 , Hydraulic Pu Part No.-3217852520 , Shaft Coupli Part No.-3217852522 , Pilot Valve Part No.-3217852524 , Seal Part No.-3217852526 , Circlip Part No.-3217852532 , Pipe Part No.-3217852900 , Thermostat Part No.-3217855800 , Pilot Valve Part No.-3217860092 , Gauge Hose Part No.-3217863800 , Gauge Hose Part No.-3217863801 , Gauge Hose Part No.-3217863802 , Adapter Part No.-3217863803 , Gauge Set Part No.-3217863852 , Check Valve Part No.-3217864301 , Valve Plate Part No.-3217866100 , Lubricat.Pump Part No.-3217866752 , Sil Part No.-3217867400 , Indicat.Lamp Part No.-3217869910 , Hydr.Pump Part No.-3217876200 , Splin.Sleeve Part No.-3217876201 , Shaft Coupl. Part No.-3217876203 , Shaft Coupli Part No.-3217876204 , Hydraulic Pump Part No.-3217876200 , Actuator Part No.-3217876242 , Heater Eleme Part No.-3217881600 , Seal Part No.-3217882221 , Hydraulic Pu Part No.-3217882236 , Hydraulic Pu Part No.-3217882237 , Hydr. Pump Part No.-3217882350 , Hydraulic Pump Part No.-3217955416 , Seal Part No.-3217882329 , Gear Pump Part No.-3217882350 , Seal Kit Part No.-3217882351 , Hydraulpump Part No.-3217882355 , Control Panel Part No.-3217883520 , Control Pane Part No.-3217883538 , Control Pane Part No.-3217883556 , Strypventil Part No.-3217884005 , Choke Screw Part No.-3217884008 , Distrb.Pipe Part No.-3217884051 , Needle Valve Part No.-3217884100 , Direct.Valve Part No.-3217886000 , Direct.Valve Part No.-3217886001 , Spare Part S Part No.-3218200866 , Connect. Pla Part No.-3217886011 , Check Valve Part No.-3217886100 , Dir. Valve Part No.-3217886211 , Coil Part No.-3217886212 , Solenoid Val Part No.-3217886213 , Attachment Part No.-3217886900 , Hatch Part No.-3217887037 , Panel Frame Part No.-3217887040 , Valve Block Part No.-3217887129 , Lever Part No.-3217887148 , Attachment Part No.-3217887150 , Valve Block Part No.-3217893701 , Valve Block Part No.-3217893701 , Seal Kit Part No.-3217893711 , Pr.Reg.Cartr Part No.-3217893713 , Valve Block Part No.-3217893720 , O-Ring Part No.-3217893721 , Restriction Part No.-3217893723 , Seqencse Val Part No.-3217893732 , Valve Part No.-3217893740 , Valve Block Part No.-3217893750 , Check Valve Part No.-3217894301 , Check Valve Part No.-3217894302 , Pr.Rel.Valve Part No.-3217894500 , Pr.Rel.Valve Part No.-3217894510 , Seal Kit Part No.-3217894512 , Seal Kit Part No.-3217894513 , Rattsats Part No.-3217894514 , Pilot Op.Checkv Part No.-3217894515 , Lever Part No.-3217894610 , Plate Part No.-3217895100 , Plate Part No.-3217895101 , Plate Part No.-3217895105 , Plate Part No.-3217895110 , Plate Part No.-3217895111 , Plate Part No.-3217895113 , Plate Part No.-3217895120 , Plate Part No.-3217895130 , Plate Part No.-3217895147 , Control Pane Part No.-3217895790 , Hydraulic Se Part No.-3217896407 , Pipe Part No.-3217896620 , Valve Block Part No.-3217896800 , Valve Block Part No.-3217896810 , Valve Block Part No.-3217896820 , Cut Hole Set Part No.-3217896940 , Press.Rel.Va Part No.-3217900209 , Level Meter Part No.-3217900800 , Sequence Val Part No.-3217901902 , Pr.Rel.Valve Part No.-3217902302 , Sealing Set Part No.-3217902692 , Box Part No.-3217903301 , Box Part No.-3217903302 , Gasket Part No.-3217903303 , Attachment Part No.-3217903304 , Bar Part No.-3217903305 , Pipe Part No.-3217903306 , Förbindning Part No.-3217903308 , Stöd Part No.-3217903309 , Rod Part No.-3217903310 , Flange Part No.-5112316209 , Insulator Part No.-3217903324 , Hydr.Motor Part No.-3217903420 , Safety Valve Part No.-3217903602 , Safety Valve Part No.-3217903603 , Safety Valve Part No.-3217903604 , Safety Valve Part No.-3217903605 , O-Ring Part No.-3217903809 , Connection P Part No.-3217906002 , Connection P Part No.-3217906003 , Connection P Part No.-3217906006 , Connect.Plat Part No.-3217906012 , Connect Plat Part No.-3217906014 , Connect. Plate Part No.-3217906019 , Seal Kit Part No.-3217907315 , Double Check Part No.-3217907500 , Pr.Rel.Valve Part No.-3217908205 , Press.Rel.Valve Part No.-3217908207 , Overcent.Val Part No.-3217908208 , Pr.Rel.Valve Part No.-3217908217 , Lock Plate Part No.-3217909600 , Water Pump S Part No.-3217916920 , Shaft Seal Part No.-3217917401 , Pump Unit Part No.-3217917406 , O-Ring Set Part No.-3217917407 , Pump Unit Part No.-3217917408 , Pump Unit Part No.-3217917409 , O-Ring Kit Part No.-3217917412 , Water Pump S Part No.-3217917510 , Water Pump S Part No.-3217917520 , Seal Kit Part No.-3217919105 , Water Pump Part No.-3217919106 , Axeltätning Part No.-3217919201 , Water Pump U Part No.-3217919250 , Regulator Part No.-3217919301 , Valve Part No.-3217919302 , Regulator Part No.-3217919303 , Regulator Part No.-3217919304 , Regulator Part No.-3217919307 , Water Pump U Part No.-3217919550 , Lighting Part No.-3217919600 , O-Ring Part No.-3217920039 , Pump Unit Part No.-3217920311 , Piston Part No.-3217920312 , Piston Guide Part No.-3217920313 , Piston Part No.-3217920314 , Shaft Part No.-3217920318 , Washer Part No.-3217920321 , Washer Part No.-3217920322 , Spring Part No.-3217920323 , Roll.Bearing Part No.-3217920325 , Roll.Bearing Part No.-3217920326 , Bearing Plate Part No.-3217920327 , Plug Part No.-3217920358 , Seal Kit Part No.-3217920382 , Control Plat Part No.-3217920394 , Roll.Bearing Part No.-3217920425 , Roll.Bearing Part No.-3217920426 , Seal Part No.-3217920444 , Pump Part No.-3217920604 , Pump Unit Part No.-3217920611 , Reg Piston Part No.-3217920612 , Piston Part No.-3217920614 , Pump Housing Part No.-3217920615 , Shaft Part No.-3217920618 , Washer Part No.-3217920622 , Spring Part No.-3217920623 , Bearing Part No.-3217920625 , Bearing Part No.-3217920626 , Bear.Plate Part No.-3217920627 , O-Ring Part No.-3217920630 , Cradle Part No.-3217920648 , Seal Part No.-3217920649 , Lock Ring Part No.-3217920650 , Distribut.Pl Part No.-2651789600 , Seal Kit Part No.-3217920682 , Water Pump S Part No.-3217925510 , Water Pump Part No.-3217925550 , O-Ring Set Part No.-3217925606 , Coupling Part No.-3217925950 , Coupling Part No.-3217925951 , Polyam.Hose Part No.-3217927300 , Socketoutlet Part No.-3217927411 , Voltmeter Part No.-3217927732 , Voltmeter Part No.-3217927739 , Ampere Meter Part No.-3217927825 , Hyd.Cylinder Part No.-3217928300 , Släpring Part No.-3217929401 , Släpring Part No.-3217929402 , Gasket Part No.-3217929404 , Limit Switch Part No.-3217929462 , Granslagesbr Part No.-3217929463 , Collector Part No.-3217929480 , Collector Part No.-3217929481 , Collector Part No.-3217929482 , Collector Kit Part No.-3217929483 , Collector Part No.-3217929484 , Collector Part No.-3217929486 , Commutator Part No.-3217929488 , Gasket Part No.-3217929503 , Slipring Part No.-3217929506 , Brush Hold. Part No.-3217929515 , Cable Terminal Part No.-3217929524 , Cover Plate Part No.-3217929525 , Cable Terminal Part No.-3217929526 , Pilot Ring Part No.-3217929528 , Brush/Insul. Part No.-3217929559 , Earth Ring Kit Part No.-3217929562 , Phase Rings Kit Part No.-3217929563 , Limit Switch Part No.-3217929565 , Belt Part No.-3217929566 , Commutator Part No.-3217929585 , Bushing Part No.-3217929617 , Outlet Part No.-3217929618 , O-Ring Part No.-3217929619 , Timing Relay Part No.-3176003528 , Time Relay Part No.-3217929908 , Motorprotect Part No.-3217931153 , Cirk.Breaker Part No.-3217931155 , Circ.Breaker Part No.-3217931158 , Circ.Breaker Part No.-3217931159 , Circ.Breaker Part No.-3217931160 , Circ.Breaker Part No.-3217931161 , Circ.Breaker Part No.-3217931162 , Circ.Breaker Part No.-3217931164 , Cir.Breaker Part No.-3217931165 , Motor Protec Part No.-3217931166 , Circuit Brea Part No.-3217931167 , Aux. Contacts Part No.-3217931170 , Circ.Breaker Part No.-3217931180 , Nozzle Part No.-3217931611 , Lock Washer Part No.-3217931614 , Trigger Part No.-3217931618 , Gas Cartridge Part No.-3217931619 , Check Valve Part No.-3217931624 , Seal Part No.-3218200830 , Attachment Part No.-3217931628 , Branch Block Part No.-3217931630 , Tank Part No.-3217931641 , Attachment Part No.-3217931642 , Attachment Part No.-3217931644 , Shaft Seal Part No.-3217933303 , Valve Part No.-3217933721 , Block Part No.-3217933722 , Valve Part No.-3217933900 , Coil Part No.-3217933901 , Pr.Red.Valve Part No.-3217934140 , Pr.Red.Valve Part No.-3217934160 , Munstycke Part No.-3217939001 , Sealing List Part No.-3217939800 , Welded Hinge Part No.-3217944020 , Electr.Motor Part No.-3217945805 , El-Motor Part No.-3217946709 , Retainer Part No.-3217946804 , Shaft Part No.-3217946811 , Fan Part No.-3217946812 , Bearing Part No.-3217946819 , Reservoir Part No.-3217946824 , Press.Guard Part No.-3217946825 , Transformator Part No.-3217951202 , Transformer Part No.-3217951210 , Transformator Part No.-3217951218 , Transformer Part No.-3217951235 , Gasket Part No.-3217953009 , Gasket Part No.-3217953011 , Hydr.Motor Part No.-3217953500 , Sealing Set Part No.-3217953501 , Flange Part No.-3217953502 , Rod Part No.-3217953602 , Ball Ring Part No.-3217953606 , Bushing Part No.-3217953607 , Gear Wheel Part No.-3217953609 , Driver Part No.-3217953610 , Driver Part No.-3217953614 , Gear Wheel Part No.-3217953615 , Micro Switch Part No.-3217953621 , Flange Part No.-3217953625 , Hydr.Pump Part No.-3217955335 , Hyd.Pump Part No.-3217955366 , Flange Part No.-3217955402 , Hydraulic Pu Part No.-3217955410 , Gear Pump Part No.-3217955411 , Gear Pump Part No.-3217955413 , Gear Pump Part No.-3217955415 , Gear Pump Part No.-3217955417 , Gear Pump Part No.-3217955418 , Seal Kit Part No.-3217955422 , El-Motor Part No.-3217956104 , El-Motor Part No.-3217956105 , Electric Motor Part No.-3217956106 , El. Motor Part No.-3217956405 , El. Motor Part No.-3217956406 , Slangledning Part No.-3217957810 , Slangledning Part No.-3217957811 , Hyd. Hose Part No.-3217957825 , Valve House Part No.-3217958001 , Seal Washer Part No.-3217958081 , Valve Block Part No.-3217958150 , Valve Part No.-3217958151 , Valve Part No.-3217958155 , Spare Part S Part No.-3217958162 , Spare Part S Part No.-3217958164 , Valve Part No.-3217958165 , Relä Part No.-3217958301 , Relay Part No.-3217958303 , Relay Part No.-3217958304 , Dir. Valve Part No.-3217958420 , Valve Block Part No.-3217958440 , Valve Block Part No.-3217958442 , Restriction Part No.-3217958443 , Restriction Part No.-3217958444 , Attachment Part No.-3217958812 , Control Arm Part No.-3217958813 , Bearing Bush Part No.-3217958814 , Control Arm Part No.-3217958823 , Retaining Ri Part No.-3217958828 , Terminal Part No.-3217959210 , Pump Part No.-3217962220 , Sealing Set Part No.-3217962221 , Repair Kit Part No.-3217962222 , Sealing Set Part No.-3217962224 , Piston Set Part No.-3217962226 , Volyme.Cir.R Part No.-3217962901 , Regulator Part No.-3217962902 , Transformer Part No.-3217965510 , Transformator Part No.-3217965521 , Transformer Part No.-3217965522 , Transformator Part No.-3217965605 , Transformer Part No.-3217965607 , Transformer Part No.-3217965615 , Transformer Part No.-3217965616 , Hour Meter Part No.-3217965801 , Hour Meter Part No.-3217965802 , Earthfaultre Part No.-3217966602 , Residual Cur Part No.-3217966606 , Earthfaultre Part No.-3217966613 , Thermostat Part No.-3217969302 , Heater Eleme Part No.-3217969307 , M.Circ Break Part No.-3217969709 , Press.Switch Part No.-3217970403 , Ph.Seq.Relay Part No.-3217970803 , Relay Part No.-3217970805 , Fasföljdsvakt Part No.-3217970806 , Flow Meter Part No.-3217971230 , Valve House Part No.-3217971250 , Coupling Part No.-3217971801 , Cardan Shaft Part No.-3217971901 , Wiper Motor Part No.-3217973102 , Wiper Motor Part No.-3217973106 , Crank Shaft Part No.-3217973107 , Link Screw Part No.-3217973113 , Link Screw Part No.-3217973114 , Link Screw Part No.-3217973115 , Link Rod Part No.-3217973116 , Connector Part No.-3217973121 , Connector Part No.-3217973123 , Flat Pin Part No.-3217973124 , Crank Shaft Part No.-3217973131 , Bearing Part No.-3217973132 , Bearing Part No.-3217973133 , Link Screw Part No.-3217973135 , Bearing Part No.-3217973146 , Bearing Part No.-3217973147 , Crank Shaft Part No.-3217973148 , Crank Shaft Part No.-3217973150 , Crank Shaft Part No.-3217973151 , Link Rod Part No.-3217973152 , Link Rod Part No.-3217973154 , Link Rod Part No.-3217973155 , Wiper Motor Part No.-3217973161 , Crank Shaft Part No.-3217973163 , Parallel Arm Part No.-3217973200 , Parallel Arm Part No.-3217973203 , Paralell Arm Part No.-3217973208 , Parallel Arm Part No.-3217973210 , Parallel Arm Part No.-3217973215 , Wiper Blade Part No.-3217973300 , Wiper Blade Part No.-3217973303 , Wiper Blade Part No.-3217973304 , Wiper Blade Part No.-3217973305 , Wiper Blade Part No.-3217973307 , Wiper Blade Part No.-3217973315 , Windscr.Wash Part No.-3217973500 , Check Valve Part No.-3217973502 , Windscr. Was Part No.-3217973505 , Clamp Part No.-3217973507 , Clipsnut Part No.-3217973566 , Cover Part No.-3217976603 , Bushing Part No.-3217976609 , Swivel Part No.-3217976610 , Lubric.Hose Part No.-3217976611 , Valve Part No.-3217976612 , Valve Part No.-3217976613 , Valve Part No.-3217976614 , Cover Part No.-3217976616 , Flow Cont.Valve Part No.-3217977300 , Seal Kit Part No.-3217977319 , Knob Part No.-3217977808 , Munstycke Part No.-3217977812 , Air Nozzle Part No.-3217977818 , Jalouise Part No.-3217977819 , Hose Reel Part No.-3217978302 , Regulator Part No.-3217978401 , Relä Part No.-3217978753 , Tidrelä Part No.-3217978851 , Transformator Part No.-3217978903 , Strålkastare Part No.-3217979861 , Glass Part No.-3217979865 , Bygel Part No.-3217979922 , Bygel Part No.-3217979923 , Check Valve Part No.-3217980120 , Check Valve Part No.-3217980122 , Display Part No.-3217980913 , Inner Light Part No.-3217982301 , Direct.Valve Part No.-3217983400 , Dragstångssats Part No.-3217983401 , Inlet Section Part No.-3217983405 , Seal Kit Part No.-3217983407 , Sealing Set Part No.-3217983409 , Control Set Part No.-3217983410 , Holder Part No.-3217983411 , Seal Kit Part No.-3217983412 , Cover Part No.-3217983413 , Backventil Part No.-3217983414 , Holder Part No.-3217983415 , Screw Part No.-3217983417 , Pinnbult Part No.-3217983418 , Centering Set Part No.-3217983420 , Barrier Part No.-3217983421 , Lever Set Part No.-3217983422 , Lever Holder Part No.-3217983423 , Pin Part No.-3217983424 , Circlip Part No.-3217983425 , Oring Part No.-3217983427 , O-Ring Part No.-3217983428 , Interm.Part Part No.-3217983430 , Lever Set Part No.-3217983433 , Lever Joint Part No.-3217983434 , Control Set Part No.-3217983435 , Lever Set Part No.-3217983436 , Pr.Rel.Valve Part No.-3217983438 , Centreringssats Part No.-3217983439 , Interm.Part Part No.-3217983440 , Control Set Part No.-3217983445 , Seal Kit Part No.-3217983446 , Catch Part No.-3217983447 , Pr.Rel.Valve Part No.-3217983448 , Pr.Rel.Valve Part No.-3217983449 , Direction Va Part No.-3217983460 , Valve Sectio Part No.-3217983468 , Valve Sectio Part No.-3217983469 , Valve Section Part No.-3217983478 , Pull Rod Set Part No.-3217983480 , Länk Part No.-3217983483 , Låsmutter Part No.-3217983484 , Screw Part No.-3217983486 , Dragstångssats Part No.-3217983490 , Control Set Part No.-3217983492 , Control Set Part No.-3217983493 , Control Set Part No.-3217983495 , Pilot Operat Part No.-3217983499 , Switch Part No.-3217983702 , Switch Part No.-3217983707 , Switch Part No.-3217983715 , Strömställare Part No.-3217984111 , Strömställare Part No.-3217984112 , Valve Part No.-3217984800 , Cont.Block Part No.-3217985800 , Fan Part No.-3217986510 , Fuseholder Part No.-3217986701 , Flash. Relay Part No.-3217987100 , Earthf.Relay Part No.-3217987302 , Flange Part No.-3217987615 , Box Casing Part No.-3217988001 , Box Casing Part No.-3217988002 , Gasket Part No.-3217988003 , Slip Ring Part No.-3217988004 , Brush Holder Part No.-3217988005 , Pipe Part No.-3217988006 , Slip Ring Part No.-3217988040 , Limit Switch Part No.-3217988050 , Limit Switch Part No.-3217988061 , Collector Part No.-3217988080 , Commutator Part No.-3217988081 , Collektor Part No.-3217988083 , Drain.Block Part No.-3217988100 , Branch Block Part No.-3217988110 , Valve Plug Part No.-3217988204 , Valve Plug Part No.-3217988205 , Valve Plug Part No.-3217988206 , Valveplug Part No.-3217988208 , Valve Plug Part No.-3217988209 , Valve Plug Part No.-3217988210 , Signal Cable Part No.-3217988211 , Cable Complete Part No.-3217988214 , Cable Complete Part No.-3217988216 , Cable Complete Part No.-3217988218 , Valve Plug Part No.-3217988222 , Valve Plug Part No.-3217988223 , Contact Part No.-3217988226 , Valve Plug Part No.-3217988245 , Valve Plug Part No.-3217988246 , Timing Relay Part No.-3217989304 , Transient Pr Part No.-3217989602 , Transient Pr Part No.-3217989603 , Diode Unit Part No.-3217989700 , Diode Unit Part No.-3217989701 , Aux. Contact Part No.-3217990337 , Overload Relay / Lrd365 48-65A Part No.-3217990495 , Overload Relay / Lrd365 48-65A Part No.-3217990496 , Overload Relay Part No.-3217990497 , Guide Light Part No.-3217995201 , Voltage Stab Part No.-3217995202 , Converter Part No.-3217995209 , Laser Part No.-3217995212 , Laser Unit Part No.-3217995213 , Junct. Box Part No.-3217995214 , Flow Guard Part No.-3217995500 , Flow Guard Part No.-3217995510 , Laser Unit Part No.-3217995523 , Laser Part No.-3217995524 , Flödesvakt Part No.-3217995530 , Flow Guard Part No.-3217995540 , Sensor Part No.-3217995550 , Pr.Red.Valve Part No.-3217996301 , Pr.Reg.Valve Part No.-3217996302 , Sealing Set Part No.-3217996304 , Press.Red.Valve Part No.-3217996321 , Press.Red.Valve Part No.-3217996322 , Steering Set Part No.-3217996323 , Pr.Reg.Valve Part No.-3217996341 , Valve Part No.-3217996342 , Pr.Rel.Valve Part No.-3217996421 , Pr.Rel.Valve Part No.-3217996431 , Press.Rel.Va Part No.-3217996432 , Overc.Valve Part No.-3217996461 , Overc.Valve Part No.-3217996486 , Flow Regul. Part No.-3217996501 , Elmotor Part No.-3217996911 , Electric Motor Part No.-3217996931 , Electric Mot Part No.-3217996940 , Protec.Cover Part No.-3217996991 , El-Motor Part No.-3217997011 , Electric Mot Part No.-3217997013 , Motor Part No.-3217997014 , El-Motor Part No.-3217997019 , Elect. Motor Part No.-3217997022 , Electric Mot Part No.-3217997023 , Electric Mot Part No.-3217997024 , Electric Mot Part No.-3217997040 , Electric Mot Part No.-3217997041 , Electric Mot Part No.-3217997047 , Electric Mot Part No.-3217997055 , Glass Part No.-3217997621 , Socketoutlet Part No.-3217997810 , Insulator Part No.-3217997813 , Sleeve Part No.-3217997814 , Cable Holder Part No.-3217997815 , Sleeve Part No.-3217997816 , Plug Connector Part No.-3217997820 , Insulator Part No.-3217997824 , Pin Part No.-3217997825 , Pin Part No.-3217997827 , Instrument Part No.-3217997838 , Connector Pl Part No.-3217997845 , Volt Meter Part No.-3217997847 , Socket Outle Part No.-3217997852 , Socketoutlet Part No.-3217997853 , Circuit Brea Part No.-3217997856 , Sleeve Part No.-3217997867 , Sleeve Part No.-3217997869 , Sleeve Part No.-3217997870 , Sleeve Part No.-3217997871 , Sleeve Part No.-3217997875 , Sleeve Part No.-3217997876 , Sleeve Part No.-3217997877 , Insulator Part No.-3217997890 , Insulator Part No.-3217997891 , Sleeve Part No.-3217997894 , Sleeve Part No.-3217997895 , Pin Part No.-3217997896 , Sleeve Part No.-3217997897 , Direct.Valve Part No.-3217998510 , Attachment Part No.-3217998700 , Switching Ge Part No.-3217998923 , Flange Part No.-3217998941 , Switch.Gear Part No.-3217999000 , Solenoid Val Part No.-3217999400 , Solenoid Val Part No.-3217999709 , Solenoid Valve Part No.-3217999720 , Coil Part No.-3217999721 , Spare Parts Part No.-3217999722 , Hydr.Pump Part No.-3217999900 , Bushing Part No.-3218200651 , Socket Part No.-3218200658 , Bellows Coup Part No.-3218200670 , Guide Part No.-3218200674 , Nut Part No.-3218200677 , Circlip Part No.-3218200685 , Seal Kit Part No.-3218200686 , Piston Part No.-3218200692 , Seal Kit Part No.-3218200693 , Piston Rod Part No.-3218200694 , Direction Va Part No.-3218200698 , Spring Pin Part No.-3218200712 , Lock Screw Part No.-3218200713 , Solenoid Part No.-3218200719 , Contact Part No.-3218200720 , Repair Kit Part No.-3218200726 , Cover Part No.-3218200746 , Cover Part No.-3218200749 , Swivel Kit Part No.-3218200753 , Screw Part No.-3218200760 , Shaftseal K Part No.-3218200762 , Mobile Spray Part No.-5590026447 , Seal Kit Part No.-3218200785 , Actuator Part No.-6060002167 , Seal Kit Part No.-3217920682 , Bearing Part No.-3217920625 , Bearing Part No.-3217920626 , Tank Part No.-3218200828 , Actuator Part No.-3218200829 , Seal Part No.-3218200831 , Heating Fan Part No.-3176006165 , Motorprotect Part No.-3218200946 , El.Ang.Grind Part No.-3219000319 , Flow Meter Part No.-3219000327 , Drill Mach. Part No.-3219000330 , Plate Part No.-3222003203 , Filt.Indicator Part No.-3222137500 , Induct. Sens Part No.-3222148809 , Rotor Part No.-3222182425 , Cam Part No.-3222182430 , Bearing Part No.-3222182453 , Bearing Part No.-3222182454 , Shaft Part No.-3222182470 , Hydraulic Motor Part No.-3222182480 , Seal Kit Part No.-3222182490 , Seal Kit Part No.-3222182491 , Main Cartridge Part No.-3222188161 , Filter Set Part No.-3222188162 , Cover Part No.-3222188163 , Safety Cartr. Part No.-3222188164 , Air Filter Part No.-3222188169 , Dust Guard Part No.-3222188199 , Sprocket Wheel Part No.-3222193800 , Lamp Holder Part No.-3222277800 , Lamp Calotte Part No.-3222277801 , Piston Part No.-3222290030 , Valve Cover Part No.-3222290134 , Disk Brake Part No.-3222290136 , Screw Part No.-3222290160 , Brake Housing Part No.-3222290163 , O-Ring Part No.-3222290165 , Circlip Part No.-3222290167 , Ball Part No.-3222290168 , Brake Disc Kit Part No.-3222290169 , Protection Hose Part No.-3222300977 , Relay Socket Part No.-3222301249 , Seal Kit Part No.-3222302648 , Washer Part No.-3222303434 , Shaft Part No.-3222303436 , O-Ring Part No.-3222303444 , Bearing Support Part No.-3222303446 , Shims Set Part No.-3222303448 , Ring Part No.-3222303449 , Ring Part No.-3222303450 , Support Part No.-3222303452 , Screw Part No.-3222303461 , Spring Part No.-3222303464 , Ground Braid Part No.-3222304820 , Ground Braid Part No.-3222304877 , Ground Braid Part No.-3222304880 , Seal Kit Part No.-3222304937 , Protection Hose Part No.-3222305615 , Seal Kit Part No.-3222305858 , Relief Cartr Part No.-3222306266 , Valve Block Part No.-3222307546 , Seal Kit Part No.-3222308135 , Eccenter Lat Part No.-3222308355 , Clamp Part No.-3222308485 , Bridge Conn. Part No.-3222308813 , Cradle Part No.-3222309643 , Rope Tension Part No.-3222309750 , Nipple Part No.-3222310440 , Solenoid Part No.-3222310610 , Piston Rod E Part No.-3222311363 , Hand Pump Part No.-3222311521 , Solenoid Cartr. Part No.-3222311765 , Angle Sensor Part No.-3222311967 , Angle Sensor Part No.-3222311970 , Cradle Part No.-3222312641 , Seal Kit Part No.-3222312935 , Air Nozzle Part No.-3222313213 , Spacer Part No.-3222313742 , Sealing Set Part No.-3222313971 , Voltage Convert Part No.-3222314120 , Solenoid Cartr. Part No.-3222314365 , Contact Housing Part No.-3222314501 , Sealing Plug Part No.-3222314504 , Contact Hous Part No.-3222314508 , Contact Hous Part No.-3222314522 , Contact Hous Part No.-3222314525 , Sensor Cable Part No.-3222314717 , Marking Sleeve Part No.-3222314778 , Joystick Part No.-3222314998 , Contact Housing Part No.-3222315832 , Blind Plug Part No.-3222315855 , Seal Kit Part No.-3222316810 , Piston Part No.-3222316812 , Skylt Part No.-3222316852 , Piston Rod Part No.-3222317340 , Pilot Piston Part No.-3222317628 , Radiator Uni Part No.-3222317890 , Flow Cont.Va Part No.-3222318276 , Seal Kit Part No.-3222318572 , Seal Kit Part No.-6060013534 , Hydraulic Pi Part No.-3222318598 , Piston Rod Part No.-3222318604 , Grommet Part No.-3222318636 , Wiper Blade Part No.-3222986201 , Piston Part No.-3222319241 , Hose Clip Part No.-3222320105 , Pulley Wheel Part No.-3222320802 , Plate Part No.-3222324160 , Valve Block Part No.-3222324184 , Welded Hinge Part No.-3222324291 , Hose Clip Part No.-3222324418 , Cradle Part No.-3222326081 , End Socket Part No.-3222326102 , Damper Part No.-3222326258 , Cover Part No.-3222326458 , Piston Part No.-3222326459 , Nut Part No.-3222326460 , Valve Part No.-3222326490 , Valve Part No.-3222326491 , Seal Kit Part No.-3222326495 , Tie Rod Kit Part No.-3222326496 , Nut Set Part No.-3222326497 , Lever Holder Part No.-3222326498 , Actuator Part No.-3222326499 , Spring Part No.-6060010283 , Seal Kit Part No.-3222326676 , Flow Regulator Part No.-3222326677 , Steering Wh.Set Part No.-3222326678 , Double Ch.Valve Part No.-3222326896 , Bearing Part No.-0501002000 , Seal Kit Part No.-3222327687 , Valve Part No.-3222327696 , Handle Part No.-3222328696 , Compensator Part No.-3222330265 , Seal Kit Part No.-3222330822 , Coil Part No.-3222331129 , Silencer Part No.-3222331266 , Oil Cooler Part No.-3222331398 , Oil Cooler Part No.-3222331402 , Lock Screw Part No.-3222332352 , Compensator Part No.-3222334137 , Connector Part No.-3222342199 , Term Lock Part No.-3222342201 , Flash Light Part No.-3222345582 , Cap Part No.-3310407600 , Regulator Part No.-3312292400 , Lock Washer Part No.-3315019502 , Lock Washer Part No.-3315019504 , Lock Washer Part No.-3315019508 , Låsbricka Part No.-3315019510 , Quick Coupli Part No.-3315167303 , Coupling Qui Part No.-3315167305 , Coupling Qui Part No.-3315167307 , Coupling Qui Part No.-3315167309 , Plug Part No.-3455040002 , Plug Part No.-3455040004 , Plug Part No.-3455040006 , Nipple Part No.-3455040201 , Nipple Part No.-3455040202 , Nipple Part No.-3455040204 , Nipple Part No.-3455040205 , Nipple Part No.-3455040206 , Nipple Part No.-3455040207 , Nipple Part No.-3455040208 , Nipple Part No.-3455040213 , Bushing Part No.-3455045705 , Bushing Part No.-3455045711 , Nipple Part No.-3455054301 , Nipple Part No.-3455054302 , Nipple Part No.-3455054303 , Nipple Part No.-3455054304 , Nipple Part No.-3455054306 , Nipple Part No.-3455054307 , Nipple Part No.-3455054308 , Hexagon Nipple Part No.-3455065103 , Nipple Part No.-3455076601 , Nipple Part No.-3455076602 , Nipple Part No.-3455076603 , Nipple Part No.-3455076605 , Nipple Part No.-3455076606 , Nipple Part No.-3455076607 , Nipple Part No.-3455076609 , Nippel Part No.-3715058100 , Elbow Nipple Part No.-3715058400 , Nippel Part No.-3715058500 , Nipple Part No.-3715058700 , Nipple Part No.-3715058800 , Elbow Part No.-3715058900 , Plug Part No.-3715059800 , Plug Part No.-3715059900 , Plug Part No.-3715060000 , Cap Part No.-3715081900 , Cap Part No.-3715082000 , Plug Part No.-3715082100 , Rubbsocket Part No.-3715088903 , Bolt Set Part No.-3715088990 , Adapter Sleeve Part No.-3715150500 , Adapt.Sleeve Part No.-3715302000 , Adapter Sleeve Part No.-3715302100 , Adapter Sleeve Part No.-3715303000 , Spool Part No.-3715313800 , Nippel Part No.-3715634400 , Seal Part No.-3715827200 , Cylinder Part No.-3716016800 , Relief Valve Part No.-3716018602 , Hyd.Cylinder Part No.-3980138780 , Pot.Holder Part No.-3980197900 , O-Ring Part No.-4090031300 , Hex Sock. Screw Part No.-4090063000 , Connector Part No.-4142404500 , Plast,Stållina Part No.-4310046400 , Press Sleeve Part No.-4330101600 , Planet Carr. Part No.-4350172200 , Bearing Washer Part No.-4350173500 , Bearing Washer Part No.-4350173600 , Gear Wheel Part No.-4350174100 , Shaft Part No.-4350176000 , Vane Kit Part No.-4350176890 , Gear Wheel Part No.-4350188100 , Spring Part No.-4350197100 , Gear Wheel Hous Part No.-4350203600 , Disc Kit Part No.-4350205690 , Sealing Set Part No.-4350205691 , Spring Set Part No.-4350205693 , Sealing Set Part No.-4350205694 , Hub Part No.-4350205900 , Interm.Part Part No.-4350216100 , Intermed. Part Part No.-4350216200 , Shaft Part No.-4350216300 , Bearing Washer Part No.-4350221100 , Ring Part No.-4350221900 , Rotor Part No.-4350250900 , Planet Gear Dr. Part No.-4350251100 , End Piece Part No.-4350253200 , Valve Part No.-4350254580 , Shaft Part No.-4350254900 , Seal Washer Part No.-4350255100 , Spindle Part No.-4350257094 , Gear Wheel Part No.-4350257500 , Intermed. Sh Part No.-4350258070 , Guard Part No.-4350258072 , Protection Part No.-4350258079 , Spindle Part No.-4350258094 , Seal Part No.-4350258217 , Seal Part No.-4350258218 , Adaptor Hous Part No.-4350258228 , Spare Parts Part No.-4350258401 , Spare Part S Part No.-4350258402 , Spare Parts Part No.-4350258403 , Spare Parts Part No.-4350258405 , Spare Parts Part No.-4350258406 , Spare Parts Part No.-4350258408 , Spare Parts Part No.-4350258430 , Spare Parts Part No.-4350258480 , Spare Parts Part No.-4350258481 , Spare Parts Part No.-4350261712 , Repair Kit Part No.-4350261714 , Spare Parts Part No.-4350261716 , Spare Parts Part No.-4350261717 , Cover Part No.-4350261720 , Floating Ada Part No.-4350261733 , Tool Part No.-4350261734 , House Part No.-4350265006 , Intermed. Sh Part No.-4350265007 , Cover Part No.-4350265009 , Back-Up Ring Part No.-4350265010 , Back-Up Ring Part No.-4350265011 , Guide Strip Part No.-4350265013 , Cover Part No.-4350265017 , Seal U-Ring Part No.-4350265024 , End Piece Part No.-4350261819 , Sealing Bush Part No.-4350265047 , Spacer Part No.-4350265083 , Spindle Part No.-4350265093 , Gear Wheel Part No.-4350265105 , Lifting Eye Part No.-4350265109 , Seal Holder Part No.-4350265118 , Shank Adapte Part No.-4350275021 , Spare Parts Part No.-4350276053 , Need.Bearing Part No.-5053010400 , Plastic Tubing Part No.-5054014000 , Buntband Part No.-5104088700 , Nippel Part No.-5107153400 , Slangledning Part No.-5107153600 , Appar. Panel Part No.-5112000030 , Loud Speaker Part No.-5112000139 , Gasket Part No.-5112000183 , Apparatus Pa Part No.-5112000288 , Drilled Box Part No.-5112000664 , El.Equipment Part No.-5112000686 , Relay Module Part No.-5112000740 , Safety Belt Part No.-5112000777 , Inner Handle Part No.-5112000778 , Inner Handle Part No.-5112000779 , Chair Compl. Part No.-5112000780 , Seal Kit Part No.-5112000788 , Push-Button- Part No.-5112000795 , Inner Light Part No.-5112000892 , Contactor Part No.-5112000897 , Socket Outle Part No.-5112001141 , Plug Connector Part No.-5112001142 , Gasket Part No.-5112001150 , Apparatus Pa Part No.-5112001220 , Panel A71 Part No.-5112001253 , Panel A74 Part No.-5112001260 , Panel A76 Part No.-5112001262 , Apparatus Pa Part No.-5112001287 , Control Box Part No.-5112001503 , Control Box Part No.-5112001513 , Junction Box Part No.-5112002041 , Drilled Box Part No.-5112002042 , Junction Box Part No.-5112002300 , Cable Complete Part No.-5112002648 , Cable Complete Part No.-5112002649 , Cable Complete Part No.-5112002652 , Cable Complete Part No.-5112002653 , Cable Complete Part No.-5112002654 , Cable Complete Part No.-5112002656 , Cable Complete Part No.-5112002657 , Cable Complete Part No.-5112002668 , Panel Part No.-5112002681 , Panel Part No.-5112002683 , Panel Plate Part No.-5112003731 , Display Kit Part No.-5112004800 , Spacer Part No.-5112010249 , Panel Plate Part No.-5112010273 , Cooling Hose Part No.-5112010323 , Cooling Hose Part No.-5112010324 , Cooling Hose Part No.-5112010325 , Cooling Hose Part No.-5112010326 , Chair Part No.-5112010351 , Junction Box Part No.-5112010401 , Switch Panel Part No.-5112010404 , Drivers Chai Part No.-5112010524 , Cable Complete Part No.-5112010541 , Junction Box Part No.-5112010548 , Junction Box Part No.-5112010550 , Cable Complete Part No.-5112010576 , Level Glass Part No.-5112010593 , Pawl Pin Part No.-5112010598 , Cable Complete Part No.-5112010686 , Cover Part No.-5112010709 , Floor Carpet Part No.-5112011325 , Support Bearing Part No.-5112011400 , Cable Complete Part No.-5112011488 , Cable Complete Part No.-5112011567 , Cable Part No.-5112012790 , Oil Seal Part No.-5112130140 , Pipe Part No.-5112142300 , Protect.Coil Part No.-5112157800 , Protect.Coil Part No.-5112157900 , Sleeve Insert Part No.-5112175800 , Bolt Set Part No.-5112188600 , Hyd.Cylinder Part No.-5112193380 , Gasket Part No.-5112200910 , Floor Rack Part No.-5112202100 , Ljuddämpare Part No.-5112205100 , Yoke Part No.-5112208402 , Hållare Part No.-5112208600 , Cable Complete Part No.-5112208800 , Ring Pin Part No.-5112209300 , Kabel Komplett Part No.-5112210500 , Tap.Collar Part No.-5112211806 , Rim Edge Part No.-5112211807 , Lock Ring Part No.-5112211808 , Dust Guard Part No.-5112213300 , Wire Part No.-5112213400 , Stop Control Part No.-5112213500 , Valve House Part No.-5112216300 , Lubr. Valve Part No.-5112216380 , H.Power Pipe Part No.-5112216400 , Cushion Part No.-5112218500 , Seal Part No.-5112221500 , Ground Braid Part No.-5112221600 , Earth Termin Part No.-5112221604 , Dämpare Part No.-5112232200 , Midjeaxel Part No.-5112232500 , Axel Part No.-5112232600 , Bushing Part No.-5112232800 , Fuel Tank Part No.-5112233180 , Fuel Tank Part No.-5112233181 , Fälghorn Part No.-5112233508 , Lock Ring Part No.-5112233509 , Fälg Kompl. Part No.-5112233580 , Clamp Part No.-5112233600 , Angle Bracke Part No.-5112233700 , Filler Pipe Part No.-5112233807 , Gasket Part No.-5112233900 , Cover Part No.-5112234000 , Gasket Part No.-5112234100 , Pilot Valve Part No.-5112234780 , Seal Kit Part No.-5112234792 , Valve Block Part No.-5112234880 , Assembly Set Part No.-5112234891 , Assembly Set Part No.-5112234893 , Rattstam Part No.-5112234980 , Steering Sha Part No.-5112235004 , Steering Whe Part No.-5112235010 , Steering Whe Part No.-5112235014 , Rattspinnare Part No.-5112235020 , Cover Washer Part No.-5112235021 , Cover Washer Part No.-5112235022 , Insulator Part No.-5112235478 , Attachment Part No.-5112235800 , Hyd.Cylinder Part No.-5112236080 , Axel Part No.-5112236300 , Cable Complete Part No.-5112236800 , Hook Part No.-5112237000 , Gasket Part No.-5112237200 , Attachment Part No.-5112237500 , Avgaskrök Part No.-5112237700 , Reducer Part No.-5112237800 , Bränsleslang Part No.-5112237900 , Bränsleslang Part No.-5112238003 , Bränsleslang Part No.-5112238005 , Safety Detail Part No.-5112238700 , Air Filter Part No.-5112239209 , Screw Part No.-5112239215 , Gasket Part No.-5112239216 , Filter Part No.-5112239217 , O-Ring Part No.-5112239219 , O-Ring Part No.-5112239222 , Pin Part No.-5112239229 , Plug Part No.-5112239234 , Magnetic Plug Part No.-5112239235 , Lock Washer Part No.-5112239240 , O-Ring Part No.-5112239248 , Bearing Part No.-5112239253 , Snap Ring Part No.-5112239257 , Lock Washer Part No.-5112239260 , Seal Part No.-5112239263 , Trunnion Block Part No.-5112239684 , Lubr.Oil Fil Part No.-5112240005 , Bränslefilter Part No.-5112240007 , Gasket Part No.-5112240008 , Service Kit Part No.-5112240022 , Service Kit Part No.-5112240031 , Fender Part No.-5112240300 , Damper Bit Part No.-5112240400 , Gummiskydd Part No.-5112240506 , Gummiskydd Part No.-5112240508 , Gas Wire Part No.-5112240700 , Stop Control Part No.-5112240800 , Nippel Part No.-5112240900 , Edge List Part No.-5112242500 , Clamp Part No.-5112243500 , Drive Plate Part No.-5112244804 , Pump Part No.-5112244815 , Avgasrenare Part No.-5112246300 , O-Ring Part No.-5112246512 , Lock Washer Part No.-5112246526 , Lock Ring Part No.-5112246569 , Bearing Part No.-5112246570 , Bearing Part No.-5112246571 , Bearing Part No.-5112246574 , Bearing Part No.-5112246611 , Bearing Part No.-5112246619 , Lock Ring Part No.-5112246623 , Piston Ring Part No.-5112246631 , Lock Washer Part No.-5112246639 , O-Ring Part No.-5112246641 , Seal Part No.-5112246666 , Washer Part No.-5112246671 , Nut Part No.-5112246672 , Seal Part No.-5112246674 , O-Ring Part No.-5112246701 , Nut Part No.-5112246719 , Screw Part No.-5112246722 , O-Ring Part No.-5112246729 , Solen.Valve Part No.-5112246745 , Plug Part No.-5112246748 , Plug Part No.-5112246751 , Plug Part No.-5112246759 , O-Ring Part No.-5112246760 , Avgasslang Part No.-5112247800 , Nippel Part No.-5112247900 , Plate Part No.-5112249300 , Cushion Part No.-5112252300 , Cover Part No.-5112252400 , Bushing Part No.-5112252500 , Bushing Part No.-5112252600 , Protection Part No.-5112253104 , Gasket Part No.-5112253200 , Shaft Part No.-5112253800 , Indicator Part No.-5112254101 , Relay Shelf Part No.-5112254700 , Clutch Contr Part No.-5112255200 , S.Wheel Post Part No.-5112255500 , Steering Sha Part No.-5112255501 , Control Unit Part No.-5112255680 , Silencer Part No.-5112255909 , O-Ring Part No.-5112256007 , O-Ring Part No.-5112256012 , Wheel Hut Part No.-5112256024 , Wheel Bolt Part No.-5112256076 , Seal Ring Part No.-5112256206 , Ring Part No.-5112256603 , Lock Ring Part No.-5112256604 , Rim Collar Part No.-5112256605 , Hyd.Cylinder Part No.-5112257080 , Inner Tube Part No.-5112257107 , Valve Part No.-5112257109 , Cardan Shaft Part No.-5112257280 , Cardan Shaft Part No.-5112257480 , Band Part No.-5112257900 , Load Valve Part No.-5112259180 , Brake Valve Part No.-5112287777 , Press.Guard Part No.-5112259500 , Bracket Part No.-5112259900 , Cable Complete Part No.-5112260000 , Cable Complete Part No.-5112260100 , Holder Part No.-5112260600 , Knob Part No.-5112260700 , Gummistropp Part No.-5112260800 , Attachment Part No.-5112260900 , Batterilock Part No.-5112261000 , Coupling Part No.-5112262200 , Kilrem Part No.-5112263506 , Kilrem Part No.-5112263507 , Givare Part No.-5112263508 , Vibr. Damper Part No.-5112264100 , Eng. Bracket Part No.-5112264200 , Flange Scr.Set Part No.-5112264300 , U-Bolt Part No.-5112264600 , Thrott.Wire Part No.-5112265100 , Exhaust Hose Part No.-5112265200 , Cable Complete Part No.-5112265800 , Cable Complete Part No.-5112265900 , Exhaust Bend Part No.-5112266000 , Accumulator Part No.-5112268032 , Attachm. Plate Part No.-5112271000 , Fender Part No.-5112271600 , Return Hose Part No.-5112272300 , Protection Part No.-5112273000 , Batterihylla Part No.-5112273124 , Strap Part No.-5112273137 , Washer Part No.-5112280302 , Screw Part No.-5112280318 , Screw Part No.-5112280339 , Lock Ring Part No.-5112280394 , Bearing Part No.-5112280399 , Cap Part No.-5112280409 , Ball Part No.-5112280513 , Spacer Ring Part No.-5112280514 , Shim Part No.-5112280531 , Shim Part No.-5112280532 , Shim Part No.-5112280533 , Shim Part No.-5112280534 , Bearing Cover Part No.-5112280535 , Ball Part No.-5533009100 , Spring Part No.-5112280560 , Seal Washer Part No.-5112280572 , Attachment Part No.-5112281200 , Blindfläns Part No.-5112282400 , Bracket Part No.-5112282600 , Steer. Unit Part No.-5112283780 , Guide Unit Part No.-5112283881 , Valve Plug Part No.-5112283883 , Guide Unit Part No.-5112283884 , Valve Part No.-5112283980 , Valve Part No.-5112283981 , Relähylla Part No.-5112286300 , Gear Control Part No.-5112286500 , Hydr.Pump Part No.-5112287734 , Hydr. Motor Part No.-5112287741 , Hydr.Motor Part No.-5112287742 , Shuttle Valv Part No.-5112287767 , Press.Switch Part No.-5112287771 , Pr.Red.Valve Part No.-5112287773 , Brake Valve Part No.-5112287777 , Hydraulic Pu Part No.-5112287789 , Direction Va Part No.-5112287790 , Hydraulic Pu Part No.-5112287797 , Hydraulic Pu Part No.-5112287801 , Hydraulic Pu Part No.-5112287802 , Gear Pump Part No.-5112287803 , Flow Regulat Part No.-5112287804 , Brake Valve Part No.-5112287805 , Brake Valve Part No.-5112287806 , Actuator Part No.-6060002166 , Valve Block Part No.-5112287815 , Brake Valve Part No.-5112287816 , Hydraulic Pu Part No.-5112287817 , Hydraulic Mo Part No.-5112287818 , Hydraulic Bl Part No.-5112287819 , Gear Pump Part No.-5112287825 , Gear Pump Part No.-5112287826 , Gear Pump Part No.-5112287827 , Check Valve Part No.-5112287832 , Guide Unit Part No.-5112287836 , Sealing Part No.-5112287843 , Locking Ring Part No.-5112287846 , Guide Unit Part No.-5112287850 , Gasket Part No.-5112287851 , Filter Part No.-5112287852 , Seal Kit Part No.-5112287855 , O-Ring Part No.-5112287857 , Filter Insert Part No.-6060006878 , Seal Kit Part No.-5112287860 , Seal Kit Part No.-5112287861 , O-Ring Part No.-5112287863 , O-Ring Part No.-5112287864 , Gasket Part No.-5112287865 , Seal Kit Part No.-5112287866 , Valve Part No.-5112287872 , Valve Part No.-5112287873 , Hydraulic Bl Part No.-5112287875 , Thermostat Part No.-5112287876 , Seal Kit Part No.-5112287884 , Hydraulic Pu Part No.-5112287894 , Valve Part No.-5112287901 , Valve Part No.-5112287902 , Valve Part No.-5112287903 , Seal Kit Part No.-5112287906 , Suction Filt Part No.-5112288890 , Suction Hose Part No.-5112288892 , Manometer Part No.-5112288895 , Brake Valve Part No.-5112288898 , Cover Part No.-5112290900 , Accumulator Part No.-5112291500 , Accumulator Part No.-5112291510 , Press.Guard Part No.-5112292100 , Press.Guard Part No.-5112292101 , Level-Temp.I Part No.-5112293100 , Pressure Screw Part No.-5112293101 , Termometer Part No.-5740184127 , Pressure Screw Part No.-5112293103 , Connection S Part No.-5112293190 , Foot Pedal Part No.-5112294300 , Gummibuffert Part No.-5112294601 , Press.Guard Part No.-5112294800 , Protect. Cover Part No.-5112294900 , Protect. Cov Part No.-5112294901 , Cardan Protect. Part No.-5112300038 , Bracket Part No.-5112300085 , Bracket Part No.-5112300086 , Bushing Part No.-5112300090 , Flange Scr.Set Part No.-5112300159 , Protection Part No.-5112300170 , Protection Part No.-5112300171 , Pedal Part No.-5112300251 , Clip Part No.-5112300268 , Lock Sheet Part No.-5112300307 , Frict.Washer Part No.-5112300310 , Pin Part No.-5112300315 , Nut Part No.-5112300323 , Ring Part No.-5112300331 , Shaft Part No.-5112300334 , Hjulbult Part No.-5112300335 , Plug Part No.-5112300337 , Pin Part No.-5112300338 , Hållare Part No.-5112300343 , Låsring Part No.-5112300344 , Gear Ring Part No.-5112300345 , Friktionsring Part No.-5112300350 , Bult Part No.-5112300351 , Plugg Part No.-5112300352 , Fjäder Part No.-5112300355 , Skruv Part No.-8440303687 , Air Screw Part No.-5112300357 , Plugg Part No.-5112300358 , Brake Disc Part No.-5112300359 , Brake Disc Part No.-5112300360 , Justerskruv Part No.-5112300361 , Gasket Part No.-5112300362 , O-Ring Part No.-5112300363 , Kolv Part No.-5112300364 , Bearing Part No.-5112300375 , Pin Part No.-5112300377 , Bearing Part No.-5112300378 , Bearing Part No.-5112300379 , Bearing Part No.-5112300380 , O-Ring Part No.-5112300383 , Bearing Part No.-5112318941 , Lock Part No.-5112300396 , Screw Part No.-5112300398 , Cardan Shaft Part No.-5112300407 , Suct.-Retu.Pipe Part No.-5112300410 , Cushion Part No.-5112300413 , Bushing Part No.-5112300414 , Bushing Part No.-5112300419 , U-Bolt Part No.-5112300424 , Gasket Part No.-5112300463 , Distrib.Gear Part No.-5112300477 , Gasket Part No.-5112300484 , Plugg Part No.-5112300485 , Låsplatta Part No.-5112300501 , Pinjong Part No.-5112300502 , O-Ring Part No.-5112300503 , Foot Part No.-5112300509 , Fuel Hose Part No.-5112300514 , Attachm. Plate Part No.-5112300542 , Pin Part No.-5112300550 , Pinnskruv Part No.-5112300551 , Attachm. Plate Part No.-5112300553 , Level Switch Part No.-5112300555 , Panel Plate Part No.-5112300575 , Rim Compl. Part No.-5112300579 , Bend Part No.-5112300581 , Catalyser Part No.-5112300590 , Oil Reservoir Part No.-5112300607 , Fan Belt Part No.-5112300709 , Generat.Belt Part No.-5112300710 , Throttle Wire Part No.-5112300726 , Catch Piston Part No.-5112300733 , Floor Rack Part No.-5112300740 , Pump Carrier Part No.-5112300746 , Bearing Part No.-5112300748 , Nut Part No.-5112300750 , Magnet.Plug Part No.-5112300751 , Attachment Part No.-5112300754 , Attachment Part No.-5112300755 , Oil Filter Part No.-5112300759 , Hand Lever Part No.-5112300788 , Arm Rest Part No.-5112300790 , Hydraulic Pump Part No.-5112287826 , Spacer Part No.-5112301018 , Suction Hose Part No.-5112301028 , Flange Part No.-5112301032 , Bushing Part No.-5112301033 , Mould Part No.-5112301053 , Plate Part No.-5112301068 , Bushing Part No.-5112301200 , Prot.Sheild Part No.-5112301202 , Chairsupport Part No.-5112301210 , Switch Kit Part No.-5112301324 , Suction Hose Part No.-5112301405 , Hatch Part No.-5112301556 , Suct.Retpipe Part No.-5112302029 , Pinnskruv Part No.-5112302043 , Bränsletank Part No.-5112302066 , Spännband Part No.-5112302087 , Hake Part No.-5112302091 , Cardan Shaft Part No.-5112302093 , Cardan Shaft Part No.-5112302094 , Cardan Shaft Part No.-5112302095 , Cover Part No.-5112302107 , Hydraulic Pump Part No.-5112302112 , Drivaxel Part No.-5112302115 , Protection Part No.-5112302133 , Silencer Part No.-5112302135 , Cardan Shaft Part No.-5112302141 , Cable Complete Part No.-5112302178 , Nippel Part No.-5112302181 , Drive Axle Part No.-5112302184 , Temperaturvakt Part No.-5112302186 , Press.Guard Part No.-5112302188 , Rev. Alarm Part No.-5112302199 , Horn Part No.-5112302200 , Slang Part No.-5112302218 , Air Filter Part No.-5112302264 , Pipe Part No.-5112302267 , Protec.Cap Part No.-5112302268 , Rubber Elbow Part No.-5112302272 , Filtercartridge Part No.-5112302277 , Domkraftrör Part No.-5112302287 , Press.Guard Part No.-5112302293 , Motor Bracke Part No.-5112302305 , Press.Guard Part No.-5112302343 , Press.Guard Part No.-5112302347 , Accum. Kit Part No.-5112302450 , Brake Disc Kit Part No.-5112302466 , Renoveringssats Part No.-5112302467 , Crown Wheel Kit Part No.-5112302468 , Planet Gear Kit Part No.-5112302471 , Attachment Part No.-5112302473 , Filter Part No.-5112302498 , Steering Kit Part No.-5112302514 , Hand Trottle Part No.-5112302870 , Cable Complete Part No.-5112303099 , Tank Cover Part No.-5112303163 , Safe Cartr. Part No.-5112303210 , O-Ring Part No.-5112303214 , Hydr. Cylinder Part No.-8232300140 , Holder Part No.-5112303273 , Throttl.Wire Part No.-5112303402 , Gasket Part No.-5112303428 , Exh.Gasket Part No.-5112303446 , Gasket Part No.-5112303454 , Exhaust Hose Part No.-5112303547 , Plate Part No.-5112303597 , Scuffing Plate Part No.-5112303609 , Plain Bearing Part No.-5112303638 , Waist Shaft Part No.-5112303639 , Waist Pin Part No.-5112303640 , Pipe Part No.-5112303652 , Rubber Cloth Part No.-5112303688 , Shaft Part No.-5112303700 , Lock Sheet Part No.-5112303701 , Fan Belt Part No.-5112303703 , Starter Part No.-5112303704 , Bracket Part No.-5112303727 , Bearing Part No.-5112303729 , Cardan Shaft Part No.-5112303731 , Screw Part No.-5112303813 , Palm Grip Part No.-5112303934 , T-Screw Part No.-5112303964 , Throttl.Wire Part No.-5112304069 , Attachment Part No.-5112304179 , Filler Set Part No.-5112304180 , Suction And Part No.-5112304280 , Fuse C.Term. Part No.-5112304310 , Mark.Plate Part No.-5112304312 , Bridge Conn. Part No.-5112304313 , Fuse Part No.-5112304314 , Fuse Part No.-5112304315 , Fuse Part No.-5112304316 , Fuse Part No.-5112304317 , Fuse Part No.-5112304318 , Fuse Part No.-5112304319 , Diode Unit Part No.-5112304333 , Strålkastare Part No.-5112304340 , Diode Unit Part No.-5112304356 , Shaft Part No.-5112304410 , Shaft Part No.-5112304427 , Nippel Part No.-5112304436 , Plate Part No.-5112304599 , Ignition Loc Part No.-5112304672 , Igniton Key Part No.-5112304673 , Flat Pin Sleeve Part No.-5112304691 , Ign. Lock Part No.-5112304692 , Block Part No.-5112304903 , Cap Part No.-5112304906 , Guide Disc Part No.-5112304908 , Attachment Part No.-5112304912 , Air Filter Set Part No.-5112305196 , Protection Part No.-5112305210 , Coupl.Compl. Part No.-5112305238 , Filter Set Part No.-5112305245 , Cardan Shaft Part No.-5112305269 , Damping Elem Part No.-5112305509 , Clamp Part No.-5112305767 , Exh. Gasket Part No.-5112305775 , Ljuddampare Part No.-5112305814 , Waist Pin Part No.-5112306083 , Stay Part No.-5112306086 , Clamp Part No.-5112306100 , Floor Carpet Part No.-5112306121 , Plastic Shee Part No.-5112306134 , Slangnippel Part No.-5112306139 , Washer Part No.-5112306187 , Tie Rod Part No.-5112306251 , Back-Up Ring Part No.-5112306296 , Pin Part No.-5112306364 , Mudguard Part No.-5112306412 , Nipple Block Part No.-5112306464 , Cardan Shaft Part No.-5112306540 , Control Arm Part No.-5112306628 , Silencer Part No.-5112306706 , Rubber Prot. Part No.-5112306756 , Door Stop Part No.-5112306818 , Door Stop Part No.-5112306819 , Gas Spring Part No.-5112306820 , Windshield W Part No.-5112306879 , Pane Part No.-5112306955 , Arm Part No.-5112306974 , Wiper Arm Part No.-5112306977 , Wiper Arm Part No.-5112306978 , Windsh.Wiper Part No.-5112306980 , Gas Spring Part No.-5112306985 , Air Receiver Part No.-5112307039 , Cardan Shaft Part No.-5112307040 , Air Reciever Part No.-5112307052 , Mudguard Part No.-5112307077 , Rubber Elbow Part No.-5112307153 , Cover W Seal Part No.-5112307161 , Exhaust Pipe Part No.-5112307164 , Rubber Prot. Part No.-5112307199 , Cardan Shaft Part No.-5112307200 , Shaft Part No.-5112307206 , Clamp Part No.-5112307213 , Silencer Part No.-5112307238 , Collect. Block Part No.-5112307252 , Attachment Part No.-5112307277 , Cover Plate Part No.-5112307281 , Pulley Part No.-5112307474 , Clamp Half Part No.-5112307476 , Rod Part No.-5112307487 , Cog Belt Part No.-5112307488 , Chair Suppor Part No.-5112307489 , Cover Comple Part No.-5112307569 , Bearing Part No.-5112307599 , Cover Plate Part No.-5112307600 , Attachment Part No.-5112307725 , Connection S Part No.-5112307735 , Clamp Part No.-5112307759 , Binder Box Part No.-5112307800 , Floor Carpet Part No.-5112307858 , Potentiomete Part No.-5112307887 , Floor Carpet Part No.-5112307899 , Support Leg Part No.-5112307913 , Support Leg Part No.-5112307920 , Support Leg Part No.-5112307921 , Support Leg Part No.-5112307929 , Support Leg Part No.-5112307930 , Kantlist Part No.-5112308127 , Filt. W.Fram Part No.-5112308136 , Motor Con.Va Part No.-5112308154 , Sealing List Part No.-5112308169 , Heating Part No.-5112308194 , T-Coupling Part No.-5112308197 , Contact Part No.-5112308198 , Attachment Part No.-5112308246 , Hub Part No.-5112308299 , Hub Part No.-5112308304 , Flange Part No.-5112308339 , Coupling Com Part No.-5112308345 , Expand. Bush Part No.-5112308376 , Pulley Part No.-5112308377 , Belt Protect Part No.-5112308379 , Fan W.Motor Part No.-5112308575 , Fan Part No.-5112308579 , Switch Part No.-5112308582 , Fan W. Motor Part No.-5112308584 , Fan W. Motor Part No.-5112308586 , Heating Part No.-5112308587 , Cover Plate Part No.-5112308660 , Gasket Part No.-5112310000 , Cover Set Part No.-5112310001 , Cable Inlet Part No.-5112310002 , Cable Gland Part No.-5112310004 , Gear Wheel Part No.-5112310005 , Key Part No.-5112310006 , Key Part No.-5112310008 , Pull Rod Set Part No.-5112310010 , Roller Part No.-5112310011 , Guide Pin Part No.-5112310012 , Gear Wheel Part No.-5112310013 , Roller Chain Part No.-5112310014 , Link Part No.-5112310015 , Coupling Part No.-5112310016 , Cable Steering Part No.-5112310018 , Wire Mesh Hose Part No.-5112310019 , Spacer Part No.-5112310021 , Centre Pipe Part No.-5112310022 , Centre Pipe Part No.-5112310023 , Pull Rod Part No.-5112310024 , Roller Part No.-5112310025 , Roller Part No.-5112310026 , Sliding Piece Part No.-5112310028 , Brake Disc Kit Part No.-5112310030 , Crown Wheel Kit Part No.-5112310032 , Diff.Kit Part No.-5112310033 , Planet Gear Kit Part No.-5112310035 , Repair Kit Part No.-5112310037 , Repair Kit Part No.-5112310038 , Wheel Bolt Part No.-5112310053 , Cover Part No.-5112310054 , Shaft Set Part No.-5112310055 , Seal Kit Part No.-5112310056 , Lubr.System Part No.-5112310062 , Repair Kit Part No.-5112310099 , Shaft Part No.-5112310100 , Block Part No.-5112310103 , Support Part No.-5112310108 , Frame Part No.-5112310110 , Gasket Part No.-5112310111 , Attachment Part No.-5112310113 , Guide Part No.-5112310114 , Protection Part No.-5112310116 , Seal Part No.-5112310135 , Fuel System Part No.-5112310139 , Gasket Part No.-5112310155 , Starter Part No.-5112310159 , Renoveringssats Part No.-5112310180 , Magnetspole Part No.-5112310181 , Wheel Bolt Part No.-5112310199 , Center.Ring Part No.-5112310201 , Startnyckel Part No.-5112310220 , Quad-Ring Part No.-5112310222 , Angle Indica Part No.-5112310243 , Avgaskrök Part No.-5112310248 , By Pass Valve Part No.-5112310260 , Trunn.Block Part No.-5112310269 , Smörjnippel Part No.-5112310278 , Knutkors Part No.-5112310282 , Clamp Part No.-5112310285 , Level Glass Part No.-5112310299 , Level Glass Part No.-5112310312 , Gear Housing Part No.-5112310474 , Glass P.Bead Part No.-5112310501 , Glassp.Bead Part No.-5112310502 , Filler Sect. Part No.-5112310507 , Glass Part No.-5112310517 , Sealing List Part No.-5112310534 , Evaporator Part No.-5112310561 , Exp. Valve Part No.-5112310562 , Pane Part No.-5112310775 , Glass Part No.-5112310776 , Glass Part No.-5112310777 , Seal Kit Part No.-5112310918 , Flange Fork Part No.-5112310919 , Trunnion Block Part No.-5112310920 , Seal Kit Part No.-5112310922 , Counter Flange Part No.-5112310923 , Washer Part No.-5112310924 , Nut Part No.-5112310925 , Shaft Seal Part No.-5112310948 , Solenoid Part No.-5112310949 , Valve Part No.-5112310959 , Direction Valve Part No.-5112310960 , Brake Lining Part No.-5112310975 , Seal Kit Part No.-5112311069 , Anslutning Part No.-5112311175 , Plan.Carrier Part No.-5112311277 , Shaft Part No.-5112311282 , Skruv Part No.-5112311285 , Seal Ring Part No.-5112311295 , O-Ring Part No.-5112311296 , O-Ring Part No.-5112311299 , Reaction Wheel Part No.-5112311451 , Seal Part No.-5112311728 , Panel Part No.-5112312008 , Shock Valve Part No.-5112312019 , Flange Part No.-5112312040 , O-Ring Part No.-5112312048 , O-Ring Part No.-5112312052 , Glass Part No.-5112312112 , Block Part No.-5112312199 , Tension Whee Part No.-5112312376 , Turntable Part No.-5112312458 , Brake Light Part No.-5112312473 , Jet Nozzle Part No.-5112312485 , Socket Inlet Part No.-5112312506 , Halogen Lamp Part No.-5112312527 , Socket Coupl Part No.-5112312533 , Bulb Part No.-5112312540 , Gasket Part No.-5112312590 , Fuel Tank Part No.-5112312607 , Rim Part No.-5112312636 , Spacer Tube Part No.-5112312666 , Spacer Tube Part No.-5112312667 , Rubber Plate Part No.-5112312678 , Attachment Part No.-5112312686 , Plate Part No.-5112312851 , Stage Part No.-5112313006 , Stage Part No.-5112313010 , Stairs Side Part No.-5112313015 , Plate Part No.-5112313068 , Sealing List Part No.-5112313257 , O-Ring Part No.-5112313308 , O-Ring Part No.-5112313317 , Seal Part No.-5112313323 , Hjulmutter Part No.-5112313325 , Cylinder Bolt Part No.-5112313328 , O-Ring Part No.-5112313333 , Mutter Part No.-5112313335 , O-Ring Part No.-5112313336 , O-Ring Part No.-5112313339 , Seal Part No.-5112313349 , Cable Part No.-5112313424 , Backalarm Part No.-5112313433 , Conector Part No.-5112313460 , Contact Hous Part No.-5112313474 , Wiring Part No.-5112313477 , Wiring Part No.-5112313478 , Protect. Cover Part No.-5112313577 , Protect. Cover Part No.-5112313582 , Platform Part No.-5112313609 , Suction Hose Part No.-5112313646 , Suction Hose Part No.-5112313647 , Yoke Part No.-5112313700 , Bränslemätare Part No.-5112313768 , Fuel Gauge Part No.-5112313774 , Attachment Part No.-5112313784 , Cover Part No.-5112313793 , Strömställare Part No.-5112313808 , Light Set Part No.-5112313833 , Flash Light Part No.-5112313902 , Shaft Coupl. Part No.-5112313968 , Protection Part No.-5112314007 , Gasket Part No.-5112314082 , Plate Part No.-5112314467 , Ignition Loc Part No.-5112314648 , Contactor Part No.-5112314728 , Push Bu.Box Part No.-5112314731 , Panel Part No.-5112314771 , Flash Light Part No.-5112314774 , Earth Bar Part No.-5112314858 , Support Beam Part No.-5112314868 , Shaft Part No.-5112314872 , Stop Pin Part No.-5112314954 , Ignition Key Part No.-5112314971 , Set Part No.-5112314972 , Hydr.Pump Part No.-5112315100 , Attachment Part No.-5112315260 , Relay Part No.-5112315262 , Relay Socket Part No.-5112315263 , Bricka Part No.-5112315290 , Proection Sh Part No.-5112315317 , Drive Shaft Part No.-5112315535 , El.Oil Filler Part No.-5112315606 , Cylinder Part No.-5112315616 , Shaft Part No.-5112315661 , Coupling Com Part No.-5112315690 , Pump Carrier Part No.-5112315732 , Inter. Shaft Part No.-5112315734 , Inter. Shaft Part No.-5112315735 , Cardan Shaft Part No.-5112315736 , Emerg.Stop Part No.-5112315844 , Min Circ Bre Part No.-5112315997 , Min Circ Bre Part No.-5112315998 , Min Circ Bre Part No.-5112315999 , Min Circ Bre Part No.-5112316000 , Shaft Part No.-5112316008 , Electric Set Part No.-5112316207 , Brush Holder Part No.-5112316208 , Attachm. Nut Part No.-5112316209 , Hose Holder Part No.-5112316285 , Control Atta Part No.-5112316377 , Control Arm Part No.-5112316378 , Voltage Conv Part No.-5112316653 , Cylinder Part No.-5112316663 , Rim Band Part No.-5112316697 , Slip Ring Part No.-5112316795 , Gasket Part No.-5112316890 , Junction Box Part No.-5112316914 , Wiring Part No.-5112316926 , Junction Box Part No.-5112316930 , Shaft Part No.-5112316944 , Glow Control Part No.-5112316951 , Relay Part No.-5112316952 , Generator Part No.-5112316953 , Starter Part No.-5112316954 , Pressure Swi Part No.-5112316955 , Thermostat Part No.-5112316956 , Seal Part No.-5112316961 , O-Ring Part No.-5112316964 , Compressor H Part No.-5112317108 , Trigger Part No.-5112317140 , Brake Disc Part No.-8440300562 , Flange Part No.-5112317170 , Hub Part No.-5112317173 , Fuse Holder Part No.-5112317224 , Plate Part No.-5112317229 , Connector Part No.-5112317254 , Fuse Box Part No.-5112317271 , Bridge Conne Part No.-5112317272 , Fuse Part No.-5112317273 , Fuse Part No.-5112317276 , Fuse Box Part No.-5112317703 , Hatch Part No.-5112317704 , Cover Part No.-5112317720 , Hatch Part No.-5112317724 , Hatch Part No.-5112317725 , Hinge Part No.-5112317742 , Spacer Part No.-5112317743 , Batterimodul Part No.-5112317828 , Gasket Part No.-5112317848 , Rubber Elbow Part No.-5112317973 , Exhaust Bend Part No.-5112317977 , Exhaust Hose Part No.-5112317983 , Valve Attm. Part No.-5112317988 , Kopplingshus Part No.-5112318017 , Stand Frame Part No.-5112318261 , Bearing Set Part No.-5112318262 , Gear Housing Part No.-5112318263 , Cylinder Part No.-5112318315 , Insulator Part No.-3217560234 , Brush Part No.-5112318324 , Pipe Part No.-5112318325 , Drilled Box Part No.-5112318326 , Shaft Set Part No.-5112318652 , Spare Part S Part No.-5112318654 , Spare Parts Part No.-5112318661 , Lock Part No.-5112318663 , Caliper Part No.-5112318680 , Brake Part No.-5112318687 , Crown Wheel Part No.-5112318690 , Thermostat Part No.-5112318692 , Diff.Kit Part No.-5112318701 , Cardan Shaft Part No.-5112318718 , Drive Shaft Part No.-5112318722 , Drive Shaft Part No.-5112318728 , Temp. Sensor Part No.-5112318750 , Temp. Gauge Part No.-5112318751 , Spring Part No.-5112318765 , O-Ring Part No.-5112318773 , Bolt Part No.-5112318775 , Shim Part No.-5112318778 , Shim Part No.-5112318779 , Shim Part No.-5112318780 , Shim Part No.-5112318782 , Shim Part No.-5112318783 , Shim Part No.-5112318784 , Shim Part No.-5112318785 , Shim Part No.-5112318786 , O-Ring Part No.-5112318787 , Diff. Kit Part No.-5112318793 , Spring Part No.-5112318794 , Shim Part No.-5112318796 , Shim Part No.-5112318797 , Shim Part No.-5112318798 , Disc Part No.-5112318799 , Disc Part No.-5112318800 , Disc Part No.-5112318801 , Different.Wheel Part No.-5112318803 , Shaft Part No.-5112318804 , Shaft Part No.-5112318809 , Shaft Set Part No.-5112318816 , Collector Part No.-5112318818 , Drum Part No.-5112318819 , Brake Disc K Part No.-5112318831 , Commutator Part No.-5112318838 , Gasket Part No.-5112318871 , Brake Disc K Part No.-5112318884 , Brake Disc K Part No.-5112318887 , Crown Wheel Part No.-5112318899 , Brake Light Part No.-5112318906 , Diff.Kit Part No.-5112318909 , Gear Part No.-5112318920 , Torque Unit Part No.-5112318921 , Swivel Kit Part No.-5112318922 , Front Tubes Part No.-5112318924 , Rear Tubes K Part No.-5112318925 , Support Part No.-5112318935 , Bearing Part No.-5112318941 , O-Ring Part No.-5112318945 , O-Ring Part No.-5112318946 , O-Ring Part No.-5112318983 , Bearing Part No.-5112318986 , Seal Ring Part No.-5112318988 , Planet Gear Part No.-5112318991 , Shaft Part No.-5112319000 , Bushing Part No.-5112319002 , Diff.Case Part No.-5112319017 , Diff.Kit Part No.-5112319018 , Crown Wheel Part No.-5112319023 , Piston Part No.-5112319083 , O-Ring Part No.-5112319102 , O-Ring Part No.-5112319108 , Control Box Part No.-5112319116 , Disk Part No.-5112319149 , Hydraulic Cy Part No.-5112319152 , Brake Disc Part No.-5112319158 , Plug Part No.-5112319161 , Plug Part No.-5112319162 , Screw Part No.-5112319163 , O-Ring Part No.-5112319173 , Solenoid Val Part No.-5112319229 , Seal Washer Part No.-5112319249 , Screw Part No.-5112319289 , Seal Part No.-5112319306 , Vane Kit Part No.-5112319311 , Diff.Kit Part No.-5112319320 , Planet Gear Part No.-5112319328 , Earth Ring K Part No.-5112319331 , Bushing Set Part No.-5112319333 , Pilotring Ki Part No.-5112319340 , Brush/Insul. Part No.-5112319350 , Phase Rings Part No.-5112319351 , Insulating S Part No.-5112319352 , Cover, Cpl. Part No.-5112319365 , Valve Cover Part No.-5112319366 , Hose Protection Part No.-5112319368 , Cover Plate Part No.-5112319384 , Plate Part No.-5112319404 , Plate Part No.-5112319405 , Wheel Part No.-5112319434 , Phase Rings Kit Part No.-5112319472 , Earth Ring K Part No.-5112319473 , Insulating S Part No.-5112319474 , Attachment S Part No.-5112319475 , Seal Washer Part No.-5112319540 , Shaft Part No.-5112319589 , Bushing Part No.-5112319592 , Spacer Part No.-5112319611 , Sleeve Part No.-5112319612 , Spacer Part No.-5112319614 , Lever Set Part No.-5112319633 , Inner Tube Part No.-5112319656 , Screw Part No.-5112319733 , Kit Part No.-5112319763 , Kit Part No.-5112319764 , Diff.Sats Part No.-5112319770 , Bromslamells Part No.-5112319771 , Kronhjulssat Part No.-5112319772 , Brake Lining Part No.-5112319823 , Pressure Swi Part No.-5112319864 , Hydraulic Cy Part No.-5112319876 , Seal Part No.-5112319925 , Rim Compl. Part No.-5112319955 , Rim Part No.-5112319956 , Ring Part No.-5112319957 , Rim Collar Part No.-5112319958 , Lock Ring Part No.-5112319959 , Valve Part No.-5112319962 , Inner Tube Part No.-5112319963 , Rim Band Part No.-5112319964 , Wheel Nut Part No.-5112319973 , Condenser Un Part No.-5112319976 , Condensor Part No.-5112319977 , Evaporator Part No.-5112319978 , Heater Eleme Part No.-5112319979 , O-Ring Part No.-5112319989 , Planet Gear Part No.-5112319996 , Diff.Kit Part No.-5112319999 , Pane Part No.-5112320023 , Pane Part No.-5112320035 , Pane Part No.-5112320036 , Window Slide Part No.-5112320048 , Pane Part No.-5112320069 , Pane Part No.-5112320070 , Pane Part No.-5112320071 , Gasket Part No.-5112320094 , Lock Lever Part No.-5112320099 , Filtercover Part No.-5112320159 , Wheel Bolt Part No.-5112320173 , Pin Part No.-5112320176 , Differential Part No.-5112320182 , Crown Wheel Part No.-5112320189 , Lamp Attachm Part No.-5112320190 , Crown Wheel Part No.-5112320197 , Clipsnut Part No.-5112320199 , Exhaust Seal Part No.-5112320225 , Exhaust Wldm Part No.-5112320226 , Exhaust Hose Part No.-5112320232 , Catalyzer+Si Part No.-5112320233 , Clamp Part No.-5112320238 , Catalyser Part No.-5112320239 , Silencer Part No.-5112320240 , Inlet Port Part No.-5112320245 , Shaft Part No.-5112320272 , Seal Part No.-5112320283 , Sleeve Coupling Part No.-5112320284 , Shaft Part No.-5112320287 , Planet Gear Part No.-5112320291 , Attachment Part No.-5112320467 , Parallel Arm Part No.-5112320470 , Parallel Arm Part No.-5112320473 , Attachment Part No.-5112320475 , Attachment Part No.-5112320476 , Washer Part No.-5112320477 , Spacer Tube Part No.-5112320478 , Pane Part No.-5112320491 , Motor Unit Part No.-5112320495 , Control Unit Part No.-5112320496 , Crown Wheel Part No.-5112320548 , Brake Disc K Part No.-5112320589 , Planet Gear Part No.-5112320595 , Crown Wheel Part No.-5112320632 , Pane Part No.-5112320707 , Pull Rod Part No.-5112320720 , Inner Handle Part No.-5112320722 , Inner Handle Part No.-5112320723 , Window Strip Part No.-5112320726 , Hatch Part No.-5112320754 , Filter Gauge Part No.-5112321213 , Roller Part No.-5112321290 , Roller Part No.-5112321291 , Drive Shaft Part No.-5112321427 , Fuse Part No.-5112321443 , Ball Bearing Part No.-0503210900 , Hydr.Transmi Part No.-5112321664 , Wiring Part No.-5112321713 , Solenoid Part No.-5112321729 , Coupling Com Part No.-5112321736 , Accel. Pedal Part No.-5112004656 , Control Attm. Part No.-5112321746 , Accelerator Part No.-5112321749 , Wiring Part No.-5112321754 , Relief Valve Part No.-5112321756 , Pane Laminat Part No.-5112321757 , Gasket Part No.-5112321779 , Junction Box Part No.-5112321781 , Gasket Part No.-5112321786 , Solenoid Part No.-5112321959 , Gasket Part No.-5112321964 , Support Bear Part No.-5112321965 , Gas Spring Part No.-5112321966 , Bearing Race Part No.-5112321977 , Brake Lining Part No.-5112322079 , Generator Part No.-5112322114 , Solenoid Val Part No.-5112322130 , Attach.Left Part No.-5112322196 , Silencer Part No.-5112322236 , Purifier Part No.-5112322237 , Clamp Part No.-5112322239 , Cable Complete Part No.-5112322266 , Cable Complete Part No.-5112322267 , Cable Complete Part No.-5112322268 , Cable Complete Part No.-5112322269 , Cable Complete Part No.-5112322270 , Cable Complete Part No.-5112322271 , Dropbox Part No.-5112322308 , O-Ring Part No.-5112322312 , Shaft Coupling Part No.-5112322418 , Flange Part No.-5112322468 , Hub Part No.-5112322469 , Block Part No.-5112322474 , Arm Rest Set Part No.-5112322558 , Flange Fork Part No.-5112322565 , Filter Part No.-5112322616 , Intake Hose Part No.-5112322622 , Rim Compl. Part No.-5112322658 , Throttle Con Part No.-5112322662 , Flash Light, Part No.-5112322663 , Bracket Comp Part No.-5112322785 , Chair Part No.-5112322831 , Gasket Part No.-5112322859 , Holder Part No.-5112322866 , Holder Part No.-5112322867 , Cable Holder Part No.-5112322868 , Filler Pipe Part No.-5112322904 , Spacer Part No.-5112322932 , Cardan Shaft Part No.-5112322933 , Cardan Shaft Part No.-5112322934 , Cardan Shaft Part No.-5112322935 , Cover Part No.-5112322946 , Cardan Shaft Part No.-5112322959 , Intake Hose Part No.-5112322996 , Gasket Part No.-5112323029 , Diesel Engine Part No.-5112323030 , Gasket Part No.-5112323073 , Exhaust System Part No.-5112323128 , Outlet Part No.-5112323132 , Inlet Part No.-5112323133 , Exhaust Hose Part No.-5112323135 , Screw, Hex Head Part No.-5112323136 , Lock Nut Part No.-5112323137 , Air Inlet Part No.-5112323150 , Air Inlet Part No.-5112323160 , Drainage Part No.-5112323171 , Cap Part No.-5112323182 , Fuel Hose Part No.-5112323186 , Fuel Hose Part No.-5112323187 , Inlet Port Part No.-5112323193 , Air Filter Set Part No.-5112323195 , Intake Hose Part No.-5112323196 , Restr. Washer Part No.-5112323248 , Exhaust Syst Part No.-5112323250 , Catalyser Part No.-5112323252 , Water Pump Part No.-5112323499 , Inlet Port Part No.-5112323528 , Ring Part No.-5112324048 , Compressor Part No.-5112330009 , Protection Part No.-5112330027 , Cooling Hose Part No.-5112330031 , Cooling Hose Part No.-5112330032 , Cooling Hose Part No.-5112330033 , Cooling Hose Part No.-5112330034 , Regulating U Part No.-5112330042 , Bowden Wire Part No.-5112330044 , Oil Pres.Sen Part No.-5112330110 , Lock Part No.-5112340055 , Lock Part No.-5112340056 , Fan W. Motor Part No.-5112340068 , Evaporator Part No.-5112340069 , Fan Part No.-5112340070 , Lock Part No.-5112361067 , Floor Carpet Part No.-5112370051 , Windshield W Part No.-5112370081 , Vibr. Damper Part No.-5112370093 , Cooling Hose Part No.-5112370094 , Cooling Hose Part No.-5112370095 , Cooling Hose Part No.-5112370096 , Cooling Hose Part No.-5112370097 , Coupling Hou Part No.-5112370101 , Compressor U Part No.-5112370108 , Door Part No.-5112370203 , Door Part No.-5112370204 , Guide Rail Part No.-5112380040 , Support Part No.-5112380055 , Wiper Blade Part No.-5112383067 , Wiper Arm Part No.-5112383077 , Wiper Arm Part No.-5112383078 , Parallell Ar Part No.-5112383080 , Wiper Blade Part No.-5112383082 , Level Switch Part No.-5112415989 , Gasket Part No.-5118018800 , Palm Grip Part No.-5118037806 , Relay Part No.-5118089900 , Grommet Part No.-5118090400 , Grommet Part No.-5118090500 , Länkstångshuvud Part No.-5118091000 , Coupl. List Part No.-5118092900 , Clamp Part No.-5118094500 , Plug Part No.-5118115900 , Wheel Assy Part No.-5500006200 , Coupler-Qd F Part No.-5500213000 , Coupler-Qd Part No.-5500213100 , Bushing Part No.-5500213300 , Connector (O Part No.-5500214300 , Tee Part No.-5500214800 , Nipple Part No.-5500215800 , Connector (O Part No.-5500215900 , Pipe Connection Part No.-5500216400 , Connector Part No.-5500216500 , Nipple Part No.-5500216700 , Tee Part No.-5500217100 , Nipple Part No.-5500217600 , Tee Part No.-5500218000 , Cap Part No.-5500218800 , Seal Washer Part No.-5500305700 , Washer Part No.-5500305800 , Filter Element Part No.-5500324500 , Gauge-Engine Part No.-5500324800 , Cleaner Part No.-5500345200 , Cleaner Part No.-5500345300 , Belt Set Part No.-5500365800 , Sender-Temp Part No.-5500370900 , Gasket Part No.-5500382000 , Bush/Reducer Part No.-5500405900 , Plug Part No.-5500409400 , Connector Part No.-5500440800 , Connector Part No.-5500440900 , Connector (M Part No.-5500441100 , Connector (P Part No.-5500460600 , Elbow-45 Part No.-5500462800 , Nipple Part No.-5500463800 , Nipple Part No.-5500463900 , Nipple Part No.-5500464600 , Nipple Part No.-5500464800 , Elbow-90 Part No.-5500465200 , Nipple Part No.-5500466100 , Nipple Part No.-5500468500 , Connector (O Part No.-5500472100 , Connector Part No.-5500472200 , Connector (O Part No.-5500472600 , Tee Part No.-5500475400 , Tee Part No.-5500476900 , Tee-Run (Jic/Jic/Jic) Blkhd Part No.-5500477600 , Tee Part No.-5500478000 , Tee Part No.-5500478100 , Bushing (P Part No.-5500481300 , Nipple Part No.-5500482400 , Nipple Part No.-5500484200 , Nipple Part No.-5500484400 , Elbow-90 (O-Ring/Jic) Part No.-5500485600 , Elbow-90 (O-Ring/Jic) Part No.-5500485700 , Nipple Part No.-5500485900 , Nipple Part No.-5500486100 , Nipple Part No.-5500486500 , Elbow-90 Part No.-5500486700 , Elbow-90 Part No.-5500487100 , Nipple Part No.-5500487400 , Nipple Part No.-5500487500 , Elbow-90 Part No.-5500487600 , Elbow-90 Part No.-5500488000 , Bushing Part No.-5500491100 , Bushing (P Part No.-5500491300 , Bushing Part No.-5500491500 , Bushing Part No.-5500491800 , Bushing (P Part No.-5500492400 , Plug Part No.-5500492700 , Connector Part No.-5500494000 , Connector (P Part No.-5500494600 , Nipple Part No.-5500495800 , Elbow-90 Part No.-5500496000 , Elbow-90 Part No.-5500496600 , Nipple Part No.-5500496800 , Nipple Part No.-5500497200 , Tee Part No.-5500497400 , Tee Part No.-5500497600 , Tee Part No.-5500498200 , Tee Part No.-5500498300 , Tee Part No.-5500498800 , Reducer Part No.-5500508300 , Bushing Part No.-5500508800 , Bushing (O Part No.-5500509000 , Bushing Part No.-5500509200 , Connector (P Part No.-5500510700 , Connector (P Part No.-5500510800 , Connector (P Part No.-5500510900 , Connector (P Part No.-5500511000 , Driveline Part No.-5500556600 , Press. Switch Part No.-5500560400 , Press. Switch Part No.-5500560500 , Press. Switch Part No.-5500560900 , Side Ring-Mo Part No.-5500561800 , Band Part No.-5500561900 , Driveline Part No.-5500603000 , Driveline Part No.-5500603100 , Driveline Part No.-5500607100 , Driveline Part No.-5500611000 , Driveline Part No.-5500611600 , Wear Ring Part No.-5500614200 , Slip Yoke Part No.-5500614800 , Bolt, Plate Part No.-5500652200 , Shim, Steel, Part No.-5500652300 , Shim, Steel, Part No.-5500652900 , Shim, Steel, Part No.-5500653000 , Shim, Steel, Part No.-5500653200 , Shim, Steel, Part No.-5500653300 , Shim (.040) Part No.-5500661600 , Shim (.010) Part No.-5500661800 , Shim (.005) Part No.-5500661900 , Shaft Part No.-5500668900 , Bushing, Part No.-5500679900 , Spacer Tube Part No.-5500681600 , Spacer Tube Part No.-5500681800 , Bushing-Bronze Part No.-5500682700 , Bushing Part No.-5500683100 , Bushing Part No.-5500683200 , Cylinder Part No.-5500685500 , Adapter Flange Part No.-5500687700 , Drive Plate Part No.-5112244804 , Plug Part No.-5500721200 , Plug Part No.-5500721600 , Nipple Part No.-5500728500 , Bushing Part No.-5500755900 , Bushing Part No.-5500756000 , Bushing (O Part No.-5500756100 , Seal Kit Part No.-5500756200 , Connector (O Part No.-5500756900 , Connector (O Part No.-5500757000 , Nipple Part No.-5500757300 , Connector (O Part No.-5500757400 , Nipple Part No.-5500757700 , Nipple Part No.-5500757800 , Nipple Part No.-5500758000 , Tee Part No.-5500758500 , Tee Part No.-5500758600 , Reducer (O Part No.-5500758800 , Reducer Part No.-5500759000 , Plug Part No.-5500769100 , Plug Part No.-5500788300 , Plug Part No.-5500788400 , Connector Part No.-5500925600 , Connector Part No.-5500925800 , Nipple Part No.-5500928800 , Bushing (O Part No.-5500930400 , Connector (O Part No.-5500930500 , Switch Modul Part No.-5500933600 , Purifier-Dz Part No.-5500937400 , Purifier-Dz Part No.-5500938000 , Purifier-Dz Part No.-5500938100 , Rod-Control Part No.-5500945200 , Insert Part No.-5500955200 , Insert Part No.-5500955700 , Plug Part No.-5500968800 , Couple Part No.-5501173900 , Bushing (O Part No.-5501174400 , Bushing (O Part No.-5501174500 , Bushing Part No.-5501174600 , Connector (O Part No.-5501174900 , Connector (O Part No.-5501175400 , Connector Part No.-5501175900 , Tee Part No.-5501177000 , Tee Part No.-5501177500 , Nipple Part No.-5501178000 , Nipple Part No.-5501178200 , Nipple Part No.-5501178300 , Connector Part No.-5501179600 , Connector (O Part No.-5501179800 , Connector Part No.-5501179900 , Nipple Part No.-5501181000 , Nipple Part No.-5501181100 , Nipple Part No.-5501181200 , Connector (O Part No.-5501181300 , Connector (O Part No.-5501181600 , Nipple Part No.-5501182400 , Nipple Part No.-5501183000 , Nipple Part No.-5501183100 , Nipple Part No.-5501183400 , Nipple Part No.-5501183600 , Nipple Part No.-5501183700 , Nipple Part No.-5501183900 , Nipple Part No.-5501184300 , Nipple Part No.-5501184600 , Nipple Part No.-5501184800 , Nipple Part No.-5501185800 , Nipple Part No.-5501185900 , Reducer (O Part No.-5501186400 , Plug Part No.-5501505300 , Connector Part No.-5501518200 , Tee Part No.-5501521500 , Bushing Part No.-5501523200 , Plug Part No.-5501533300 , Tee Part No.-5501536500 , Couple Part No.-5501536800 , Bushing (O Part No.-5501595000 , Plug Part No.-5501595800 , Connector (P Part No.-5501600400 , Connector (P Part No.-5501600500 , Connector (P Part No.-5501600700 , Connector (P Part No.-5501603200 , Brake Valve Part No.-5501688400 , Purifier Part No.-5501695400 , Purifier-Dz Part No.-5501695600 , Elbow-90 Part No.-5501709400 , Elbow-90 Part No.-5501709500 , Elbow-90 Part No.-5501709600 , Tube-Flex Part No.-5501849700 , Connector Part No.-5501850500 , Bronze Bushing Part No.-5502900200 , Bronze Bushing Part No.-5502900700 , Insert Part No.-5502991100 , Cover Part No.-5503164600 , Cover Part No.-5503164700 , Manifold Part No.-5503190700 , Gasket Part No.-5503232900 , Gasket Part No.-5503233200 , Cylinder Part No.-5503337600 , Connector Part No.-5503718600 , Plug Part No.-5503722500 , Plug Part No.-5503722600 , Pipe Connection Part No.-5503999700 , Connector (O Part No.-5504279800 , Connector (O Part No.-5504380200 , Bushing Part No.-5504383400 , Tip Part No.-5504484800 , Connector Part No.-5504770400 , Nipple Part No.-5504880000 , Bushing Part No.-5504909900 , Nipple Part No.-5505111200 , Elbow-45 (O-Ring/Jic) Part No.-5505347100 , Reducer Part No.-5505374300 , Nipple Part No.-5505500800 , Inst-Hose Part No.-5505628100 , Starter Part No.-5505709900 , Tee Part No.-5505748500 , Connector (O Part No.-5505751300 , Gasket Part No.-5505911500 , Nipple Part No.-5506279700 , Connector (O Part No.-5506284500 , Engine Shutd Part No.-5506338900 , Transducer A Part No.-5506656500 , Transducer A Part No.-5506761200 , Transducer A Part No.-5506761300 , Holder Part No.-5506809600 , Transducer A Part No.-5506837000 , Driveline Part No.-5506946200 , Nipple Part No.-5506953800 , Transducer A Part No.-5507021800 , Harness-Main Part No.-5507165200 , Kit-Gasket Part No.-5507254300 , Pedal-Brake Part No.-5507398800 , Trunnion Part No.-5572855100 , Connector (O Part No.-5507482200 , Battery Swit Part No.-5507496900 , Belt Kit Part No.-5507623800 , Banjo Fittin Part No.-5507656400 , Connector Part No.-5507719800 , Belt Part No.-5507751200 , Connector Part No.-5507791200 , Belt Set Part No.-5507810700 , Gasket Part No.-5507811900 , Coupler-Quic Part No.-5507824900 , Tryckstromst Part No.-5507961700 , Hose Compl. Part No.-5508184900 , Shims Part No.-5508204600 , Kit- Maint Part No.-5530005400 , Kit- Maint Part No.-5530005500 , Kit- Maint Part No.-5530005600 , Kit-Maint 25 Part No.-5530005700 , Service Kit Part No.-5530007400 , Kit-Maint 50 Part No.-5530007600 , Kit-Maint 10 Part No.-5530007700 , Pm-Consum 10 Part No.-5530007800 , Kit-Maint 50 Part No.-5530007900 , Kit-Maint 10 Part No.-5530008000 , Service Kit Part No.-5530008600 , Service Kit Part No.-5530008700 , Service Kit Part No.-5530009000 , Kit-Consum 2 Part No.-5530009100 , Kit-Consum 5 Part No.-5530009200 , Kit-Consum 1 Part No.-5530009300 , Kit-Maint 25 Part No.-5530011100 , Kit-Maint 50 Part No.-5530011200 , Kit-Maint 10 Part No.-5530011300 , Kit-Cylinder Part No.-5530023000 , Kit-Conv Rpr Part No.-5530023100 , Service Kit Part No.-5530032600 , Service Kit Part No.-5530032700 , Service Kit Part No.-5530032800 , Service Kit Part No.-5530032900 , Kit-Cylinder Part No.-5530042000 , Kit-Seal Part No.-5530048800 , Kit-Filter Part No.-5530052200 , Kit-Filter Part No.-5530052300 , Kit-Filter Part No.-5530052400 , Kit-Filter Part No.-5530053100 , Kit-Consum 1 Part No.-5530060600 , Kit-Maint 12 Part No.-5530066700 , Kit-Maint 20 Part No.-5530066800 , Kit-Maint 50 Part No.-5530067100 , Kit-Maint 10 Part No.-5530067200 , Kit-Repair Part No.-5530074200 , Kit-Maint Part No.-5530080900 , Kit-Maint Part No.-5530081000 , Kit-Maint Part No.-5530083500 , Kit-Maint 25 Part No.-5530084500 , Kit-Maint 50 Part No.-5530085500 , Capscrew Part No.-5530502100 , Capscrew Gr5 Part No.-5530502500 , Capscrew Part No.-5530504900 , Capscrew Part No.-5530505600 , Capscrew Part No.-5530509700 , Cotter Pin Part No.-5530510600 , Cotter Pin Part No.-5530511400 , Flap Cotter Part No.-5530511500 , Cotter Pin Part No.-5530512000 , Cotter Pin Part No.-5530512200 , Cotter Pin Part No.-5530513000 , Cotter Pin Part No.-5530514000 , Clevis Pin Part No.-5530516300 , Pin Part No.-5530516400 , Nipple Part No.-5530518300 , Capscrew Part No.-5530522900 , Capscrew Part No.-5530525700 , Setscrew Part No.-5530527100 , Setscr Part No.-5530528000 , Tee Part No.-5530563000 , Capscrew Part No.-5530600000 , Capscrew Part No.-5530600400 , Capscrew Part No.-5530604300 , Screw, Hex Head Part No.-5530604400 , Screw, Hex Head Part No.-5530604600 , Screw, Hex Head Part No.-5530604800 , Screw, Hex Head Part No.-5530605800 , Capscrew Part No.-5530608400 , Screw, Hex Head Part No.-5530609300 , Capscrew Part No.-5530612100 , Screw, Hex Head Part No.-5530612200 , Capscrew Part No.-5530613700 , Lock Nut Part No.-5530614900 , Hexagon Nut Part No.-5530615300 , Jam Nut Part No.-5530616300 , Jam Nut Part No.-5530617700 , Nut Part No.-5530701400 , Lock Washer Part No.-5530702700 , Lock Washer Part No.-5112246526 , Lock Washer Part No.-5530703200 , Lock Washer Part No.-5530703300 , Washer Part No.-5530705300 , Lock Nut Part No.-5530705500 , Lock Nut Part No.-5530705700 , Washer Part No.-5530706000 , Clevis Part No.-5530710300 , Locknut-Esna Part No.-5530711200 , Lock Nut Part No.-5530711600 , Clevis Part No.-5530712300 , Pin Part No.-5530712900 , Screw Part No.-5530713700 , Screw Part No.-5530714300 , Lock Nut Part No.-5530724100 , Lock Nut Part No.-5530735600 , Plug Part No.-5530736500 , Plug Part No.-5530740000 , Cotter Pin Part No.-5530740100 , Lock Washer Part No.-5530752200 , Capscrew Part No.-5530753100 , Screw, Hex Head Part No.-5530753600 , Screw Part No.-5530753900 , Capscrew Part No.-5530754900 , Lock Nut Part No.-5530755100 , Lock Nut Part No.-5530755200 , Lockwasher Part No.-5530755500 , Lock Washer Part No.-5530755600 , Screw Part No.-5530755800 , Screw Part No.-5530755900 , Plug Part No.-5530756600 , Capscrew Part No.-5530758200 , Screw Part No.-5530765200 , Capscrew Part No.-5530768600 , Lwasher-Int Part No.-5530771500 , Nut Part No.-5530772100 , Washer Part No.-5530772200 , Flatwasher Part No.-5530774200 , Lock Nut Part No.-5530776000 , Capscrew Part No.-5530777400 , Couple Part No.-5530782800 , Screw, Hex Head Part No.-5530787600 , Capscrew Part No.-5530788000 , Plug Part No.-5530789200 , Capscrew Part No.-5530807200 , Capscrew Part No.-5530814400 , Roll Pin Part No.-5530815000 , Screw Part No.-5530815100 , Washer Part No.-5530822200 , Screw Part No.-5530833200 , Capscrew Part No.-5530837500 , Screw, Hex Head Part No.-5530845800 , Capscrew Part No.-5530845900 , Screw, Hex Head Part No.-5530846500 , Capscrew Part No.-5530847200 , Screw Part No.-5530847400 , Bolt Part No.-0144328803 , Lock Nut Part No.-5530851000 , Lock Nut Part No.-5530851100 , Capscrew Part No.-5530851700 , Capscrew Part No.-5530851800 , Capscrew Part No.-5530851900 , Capscrew Part No.-5530852300 , Washer Part No.-5530854800 , Screw Part No.-5530855900 , Capscrew Part No.-5530858500 , Clevis Pin Part No.-5530860400 , Screw, Hex Head Part No.-5530864500 , Capscrew Part No.-5530864600 , Hexagon Nut Part No.-5530868800 , Capscrew Part No.-5530868900 , Screw, Hex Head Part No.-5530879900 , Capscrew Part No.-5530881700 , Lockwasher Part No.-5530889800 , Lock Washer Part No.-5530892300 , Washer Part No.-5530896400 , Capscrew Part No.-5530897100 , Nut Part No.-5530897300 , Screw, Hex Head Part No.-5530897700 , Stud-Weld Part No.-5530898500 , Hexagon Nut Part No.-5530899400 , Nut Part No.-5530901400 , Lock Washer Part No.-5530902100 , Lock Washer Part No.-5530903000 , Screw Part No.-5530905400 , Screw, Hex Head Part No.-5530907000 , Lock Nut Part No.-5530912400 , Nut Part No.-5530914300 , Nut Part No.-5530915000 , Screw, Hex Head Part No.-5530915300 , Pin-Clevis Part No.-5530918800 , Screw Part No.-5530920200 , Screw Part No.-5530921500 , Capscrew Part No.-5530921800 , Capscrew Part No.-5530923400 , Nut Part No.-5530924100 , Lock Nut Part No.-5530927300 , Screw, Hex Head Part No.-5530927700 , Capscrew-Hex Hd Part No.-5530933200 , Hexagon Nut Part No.-5530948500 , Hex Screw Part No.-5530952400 , Roll Pin Part No.-0108169144 , Lockwasher Part No.-5530959000 , Lock Washer Part No.-5530959100 , Lock Nut Part No.-5530964500 , Lock Nut Part No.-5530964800 , Lock Nut Part No.-5530966100 , Nipple Part No.-5530973200 , Capscrew Part No.-5530978200 , Screw, Hex Head Part No.-5530982100 , Screw, Hex Head Part No.-5530983600 , Screw Part No.-5530986800 , Capscrew Part No.-5530988000 , Coupling Part No.-5530989300 , Capscrew Part No.-5530992700 , Screw, Hex Head Part No.-5530999500 , Screw, Hex Head Part No.-5530999600 , Lock Nut Part No.-5531006000 , Screw, Hex Head Part No.-5531009700 , Lock Nut Part No.-5531012700 , Lock Nut Part No.-5531012800 , Lock Nut Part No.-5531013500 , Lock Nut Part No.-5531013600 , Capscrew Part No.-5531019900 , Screw, Hex Head Part No.-5531020300 , Screw, Hex Head Part No.-5531022800 , Capscrew Part No.-5531024800 , Screw, Hex Head Part No.-5531025500 , Capscrew Part No.-5531028000 , Capscrew Part No.-5531028100 , Screw Part No.-5531028400 , Screw, Hex Head Part No.-5531028500 , Screw, Hex Head Part No.-5531041700 , Screw, Hex Head Part No.-5531060300 , Flange Screw Part No.-5531066700 , Flange Nut Part No.-5531068600 , Clevis Pin Part No.-5531070700 , Clamp Part No.-5531075200 , Screw, Hex Head Part No.-5531076500 , Washer Part No.-5531077800 , Locknut Part No.-5531078300 , Lock Nut Part No.-5531080000 , Screw, Hex Head Part No.-5531084500 , Capscrew Part No.-5531085400 , Capscrew Part No.-5531088000 , Mtg Band Part No.-5532507900 , Quad Ring Part No.-5532520800 , Wiper-Bonded Part No.-5532521200 , Screw Part No.-5532526700 , Nut Part No.-5532527000 , Washer Part No.-5532528700 , O-Ring Part No.-5532532400 , Washer Part No.-5532534500 , Spring Part No.-5532536300 , Spring Part No.-5532536700 , Ring Part No.-5532539600 , Valve, Check Part No.-5532816800 , Valve Part No.-5532817900 , Aeration Nipple Part No.-5532823700 , Switch Part No.-5532850600 , Cap Part No.-5532853300 , Strainer Part No.-5532853400 , Seal Part No.-5532858900 , Coupler Part No.-5532868600 , Column Part No.-5532902500 , Rod End Part No.-5532920400 , Valve, Large Part No.-5532934700 , Seal Part No.-5532961400 , Flap Cotter Part No.-5532998400 , Ball Part No.-5533009100 , Ball Part No.-5533009300 , Ball Part No.-5533009700 , Spider Part No.-5533013600 , Washer Part No.-5533014900 , Deflector Part No.-5533016100 , Nut Part No.-5533018900 , Washer Part No.-5533029300 , Dowel Part No.-5533031100 , Washer Part No.-5533037000 , O-Ring Part No.-5533037900 , O-Ring Part No.-5533038300 , Flange Part No.-5533040600 , Roller Part No.-5533045000 , Washer Part No.-5533045900 , Washer Part No.-5533057400 , Washer Part No.-5533057800 , Spacer Part No.-5533058000 , Pipe Plug Part No.-5533073900 , Bolt Part No.-5533077300 , Spider Part No.-5533077700 , Retaining Nut Part No.-5533079300 , Seal Part No.-5533084700 , Washer Part No.-5533086500 , Bearing Cage Assembly Part No.-5533086900 , Seal Part No.-5533100200 , Spider & Brg Part No.-5533101500 , Spider & Brg Part No.-5533102300 , Brass Washer Part No.-5533111200 , Stud Part No.-5533119100 , Spacer Part No.-5533128500 , Lock Part No.-5533129000 , O Ring Part No.-5533129400 , Dowel Part No.-5533131200 , Stud Part No.-5533146300 , Stud Part No.-5533149500 , Breather Part No.-5533150500 , Valve Part No.-5533216800 , Plug Part No.-5533221000 , Bushing Part No.-5533245400 , O-Ring Part No.-5533272100 , O-Ring Part No.-5533272700 , O-Ring Part No.-5533272800 , O-Ring Part No.-5533273300 , O-Ring Part No.-5533273600 , O-Ring Part No.-5533274000 , O-Ring Part No.-5533275100 , Bushing Part No.-5533288300 , Cover Part No.-5533291000 , Gasket Part No.-5533291100 , Stud Part No.-5533296300 , Stud Part No.-5533298700 , Seal Part No.-5533300900 , Screw Part No.-5533310300 , Spring Part No.-5533323900 , Stud Part No.-5533324000 , Impeller Part No.-5533324500 , Hub-Impeller Part No.-5533324700 , Hub Part No.-5533324800 , Washer Part No.-5533325200 , Pump Drive Part No.-5533325400 , Support Assy Part No.-5533325500 , Shaft Part No.-5533325600 , Output Shaft Part No.-5533325900 , Valve Part No.-5533326400 , Seat Part No.-5533326600 , Gasket Part No.-5533326700 , Gear Part No.-5533326900 , Lock Ring Part No.-5533327000 , Ring Part No.-5533327100 , Ring Part No.-5533327200 , Bearing Part No.-5533327300 , Adapter Part No.-5533327700 , Flange Part No.-5533327800 , Bearing Part No.-5533327900 , Retainer Ring Part No.-5533331200 , Cover Part No.-5533334500 , Piston Ring Part No.-5533334700 , Ring Part No.-5533335000 , Support Assy Part No.-5533335100 , Piston Sleev Part No.-5533335400 , End Plate Part No.-5533335500 , Piston Part No.-5533335600 , Bearing Part Part No.-5533336400 , End Plate Part No.-5533336800 , Piston Part No.-5533337000 , Gear Part No.-5533338300 , Gear Part No.-5533338400 , Piston Ring Part No.-5533338500 , Ring Part No.-5533338700 , Flange Part No.-5533339500 , Flange Part No.-5533340000 , Cap Part No.-5533340100 , Bearing Cap Part No.-5533340200 , Gasket Part No.-5533340300 , Spacer Part No.-5533340400 , Spacer Part No.-5533340500 , Spacer Part No.-5533340600 , Baffle Ring Part No.-5533341100 , Oil Pan Part No.-5533342700 , Oil Baffle Part No.-5533344900 , Spring Part No.-5533345000 , Cover Part No.-5533345700 , Capseal Assy Part No.-5533346300 , Cover Plate Part No.-5533346600 , Spool Part No.-5533347100 , Spring Part No.-5533347200 , Spring Part No.-5533347500 , Spring Part No.-5533347600 , Valve Part No.-5533347700 , Spacer Part No.-5533347900 , Gasket Part No.-5533348000 , Washer Part No.-5533348200 , Cap Shim Part No.-5533348500 , Cap Shim Part No.-5533348600 , Cap Shim Part No.-5533348700 , Shim-Cap Part No.-5533348800 , Shim-Cap Part No.-5533348900 , Shim-Cap Part No.-5533349000 , Ring Part No.-5533349100 , Cover Clutch Part No.-5533350700 , Frame Gasket Part No.-5533353300 , Output Shaft Part No.-5533353600 , Lock Part No.-5533353700 , Disk Part No.-5533353900 , Backing Pl Part No.-5533354000 , Turbine Part No.-5533354200 , Baffle Part No.-5533354300 , Ring Part No.-5533354400 , Sleeve Part No.-5533354600 , Shaft Part No.-6060008772 , Output Shaft Part No.-5533354800 , Lube Tube Part No.-5533354900 , Spacer Part No.-5533355000 , Shim Part No.-5533355100 , Shim Part No.-5533355200 , Shim Part No.-5533355300 , Shim Part No.-5533355400 , Shim Part No.-5533355500 , Shim Part No.-5533355600 , O-Ring Part No.-5533356500 , O-Ring Part No.-5533356800 , Link Part No.-5533356900 , Spacer Part No.-5533357000 , Cap Part No.-5533357100 , Retainer Part No.-5533357300 , Bearing Cap Part No.-5533357700 , Stop Part No.-5533368900 , Dowel Pin Part No.-5533370800 , Turbine Part No.-5533372000 , Plate-Lock Part No.-5533372200 , Plate-Lock Part No.-5533372500 , Baffle Plate Part No.-5533372600 , Oil Tube Part No.-5533372800 , Washer Part No.-5533373100 , Control Valv Part No.-5533373200 , Sleeve Part No.-5533373300 , Washer Part No.-5533373900 , Flange Assy Part No.-5533374500 , Spring Part No.-5533375400 , Plunger Part No.-5533375500 , Turbine Part No.-5533377300 , Cover Part No.-5533378400 , Gasket Part No.-5533378500 , Snap Ring Part No.-5533382000 , Ring Part No.-5533382200 , Ring Part No.-5533382800 , Ring Part No.-5533382900 , Ring-Snap Part No.-5533383000 , Ring Part No.-5533383400 , Ring Part No.-5533383500 , Ring Part No.-5533383600 , Ring Part No.-5533384100 , Snap Ring Part No.-5533384500 , Ring Part No.-5533384600 , Ring-Snap Part No.-5533384800 , Ring Part No.-5533385300 , Ring Part No.-5533385700 , Spring Part No.-5533386200 , Piston Part No.-5533386300 , Ring Part No.-5533386600 , Disc-Clutch Part No.-5533386700 , End Plate Part No.-5533386800 , Bearing Assy Part No.-5533395700 , Bearing Part No.-5533398500 , Bearing Part No.-5533398700 , Bearing Part No.-5533400100 , Bearing Part No.-5533400200 , Bearing Part No.-5533400300 , Cover Part No.-5533404400 , Gasket Part No.-5533404700 , Spring Part No.-5533405100 , Plug Part No.-5533405200 , Plug Part No.-5533405300 , Plug Part No.-5533405400 , Disc-Inner Part No.-5533405500 , Plug Part No.-5533406100 , Valve Part No.-5533406200 , Valve Part No.-5533409000 , Valve Part No.-5533409100 , Valve Part No.-5533410900 , Spacer Part No.-5533415000 , Ring-Seal Part No.-5533417600 , Plug Part No.-5533459100 , Solenoid Part No.-5533464900 , O-Ring Part No.-5533494100 , Yoke Part No.-5533500100 , Governor Part No.-5533530000 , Valve Part No.-5533547100 , Valve Part No.-5533547800 , Bleeder Screw Part No.-5533549600 , Yoke Part No.-5533603600 , Cushion-Seat Part No.-5533604000 , Back-Seat Part No.-5533604100 , Lock Nut Part No.-5533608800 , Cup-Brg Part No.-5533612200 , Cone-Rlr Brg Part No.-5533613000 , Cup Part No.-5533614900 , Inflating Device Part No.-5533615200 , Plug Part No.-5533626900 , Stud Part No.-5533632700 , Seat Part No.-5533639200 , Poppet Part No.-5533639400 , Valve Part No.-5533643800 , Charging Pump Part No.-5541743200 , Cup Part No.-5533654300 , Gauge Part No.-5533661500 , Filler Part No.-5533680100 , Knob Part No.-5533684100 , Plunger Part No.-5533690700 , Yoke Part No.-5533734800 , Washer Part No.-5533745600 , Pin Part No.-5533753900 , Spring Part No.-5533756500 , Lock Pin Part No.-5533765800 , Pin Part No.-5533766100 , Bearing Cup Part No.-5533772900 , Drain Plug Part No.-5533790800 , Bearing Part No.-5533799100 , Ring-Snap Part No.-5533804500 , Kit-Spacer Part No.-5533814000 , Spacer-Ring Part No.-5533820600 , Strainer Part No.-5533832500 , Clamp Part No.-5533854300 , Pin Part No.-5533900600 , O-Ring Part No.-5533908900 , O-Ring Part No.-5533909600 , O-Ring Part No.-5533910000 , Valve Part No.-5533931700 , Housing Part No.-5533958800 , Dip Stick Part No.-5533958900 , Spring Part No.-5533959700 , Seal Part No.-5533960300 , Bearing Part No.-5533960400 , Bearing Part No.-5533960700 , Bearing Part No.-5533960800 , Ring-Snap Part No.-5533960900 , Spacer Part No.-5533961200 , Disc Part No.-5533961300 , Ring Part No.-5533962400 , Bearing Part No.-5533962500 , Valve Part No.-5533963000 , Gasket Part No.-5533963500 , Stud Part No.-5533963600 , Flange-6C Part No.-5533964600 , Spool Part No.-5533964800 , Spool Part No.-5533964900 , Plate Part No.-5533965000 , Spring Part No.-5533965200 , Gasket Part No.-5533965800 , Gasket Part No.-5533966100 , Screen Part No.-5533966300 , Ring Part No.-5533966400 , Bearing Assy Part No.-5533966500 , Bearing Part No.-5533966700 , Gasket Part No.-5533966900 , Nut Part No.-5533967100 , Oil Seal Part No.-5533967300 , Flange-7C Part No.-5533967500 , Gasket Part No.-5533967600 , Spacer Part No.-5533967800 , Spacer Part No.-5533967900 , Retainer Part No.-5533968100 , Retainer Part No.-5533968200 , Piston Ring Part No.-5533969000 , Disc Part No.-5533969200 , Disc Part No.-5533969700 , O-Ring Part No.-5533970400 , Bolt Part No.-5533971000 , Bearing Part No.-5533972900 , Pin Part No.-5533973100 , Pin Part No.-5533973200 , Seal Part No.-5533974000 , Kit-Seal Part No.-5533980700 , Capscrew Part No.-5533993700 , Lock Washer Part No.-5533996300 , Pin Part No.-5533997600 , Plug Part No.-5533997900 , Cap Part No.-5533999000 , Elbow Part No.-5533999200 , Adapter Part No.-5533999400 , Plug Part No.-5534000800 , O-Ring Part No.-5534001500 , O-Ring Part No.-5534001700 , O-Ring Part No.-5534012000 , O-Ring Part No.-5534012500 , O-Ring Part No.-5534013400 , O-Ring Part No.-5534014300 , O-Ring Part No.-5534014400 , O-Ring Part No.-5534014600 , O-Ring Part No.-5534014800 , O-Ring Part No.-5534015400 , Kit-Seal Part No.-5534026500 , Kit-Seal Part No.-5534027200 , Clamp Part No.-5534037400 , Gasket Part No.-5534039000 , Valve Part No.-5534039500 , Diaphragm Part No.-5534050000 , Bearing Part No.-5534069700 , Cup Part No.-5534083700 , Cone Part No.-5534083800 , Cone-Brg Part No.-5534087100 , Cone-Rlr Brg Part No.-5534087200 , Cup Part No.-5534087300 , Cone-Rlr Brg Part No.-5534087400 , Cup Part No.-5534088900 , Cone Part No.-5534089000 , Bearing Cup Part No.-5534089400 , Bearing Cone Part No.-5534089500 , Seal Part No.-5534115300 , Stud Part No.-5534119100 , Dowel Part No.-5534120300 , Stud Part No.-5534128200 , Diff Spider Part No.-5534128600 , Shim-0.007 Part No.-5534131800 , Shim-0.010 Part No.-5534131900 , Shim-0.020 Part No.-5534132000 , Spring Part No.-5534133400 , Seal Part No.-5534136100 , Ring Part No.-5534138800 , Ring Kit Part No.-5534140500 , Nut Part No.-5534143400 , Stud Part No.-5534144100 , Spacer Part No.-5534144300 , Gasket Part No.-5534145100 , Ring Part No.-5534145700 , Spring Part No.-5534147600 , Gasket Part No.-5534147800 , Spring Part No.-5534148100 , Cap Part No.-5534148900 , Bearing Cap Part No.-5534149000 , Plate Part No.-5534149100 , Plate Part No.-5534149200 , Hub Part No.-5534149300 , Adapter Part No.-5534149800 , Drain Cock Part No.-5534170600 , Mount Shock Part No.-5534193400 , Socket Part No.-5534198300 , Diode Part No.-5534198700 , Spider & Brg Part No.-5534200300 , Ring Part No.-5534221300 , Ring Part No.-5534221600 , Ring Part No.-5534221700 , Lock Ring Part No.-5534223100 , Valve-Check Part No.-5534241600 , Bearing Part No.-5534250300 , Bearing Part No.-5534251000 , Bearing Part No.-5534251800 , Seal Part No.-5534252600 , Spring Part No.-5534252900 , Valve Part No.-5534253100 , Housing Part No.-5534253900 , Gauge (Tool) Part No.-5534272700 , Pressure Gauge (5000 Psi) Part No.-5534273800 , Ring Part No.-5534273900 , Bearing Part No.-5534275100 , Element Part No.-5534279900 , Knob Part No.-5534285100 , Kit Part No.-5534301200 , Bearing Part No.-5534319500 , Bearing Part No.-5534321900 , Bearing Part No.-5534322000 , Pin Part No.-5534341300 , Valve-Reg Part No.-5534374100 , Breather Part No.-5534375900 , Cylinder Part No.-5534378600 , Tube Part No.-5534409200 , Valve Part No.-5541906600 , Spool Part No.-5534409900 , Spider & Brg Part No.-5534424800 , Cup Part No.-5534501000 , Baffle Part No.-5534501200 , Clamp Part No.-5534533000 , Stud Part No.-5534543900 , Rod End Part No.-5534552000 , Nut Lock Part No.-5534559300 , Seal Part No.-5534559900 , Bearing Part No.-5534560000 , Bearing Part No.-5534560600 , Kit-Snapring Part No.-5534561000 , O-Ring Part No.-5534563300 , Seal Part No.-5534563400 , Grip Part No.-5534570600 , Switch Part No.-5534574300 , Bearing Part No.-5534578700 , Ring Part No.-5534581300 , Ring Part No.-5534618900 , Ring Part No.-5534619000 , Gasket Part No.-5534636700 , Tube Part No.-5534644100 , Plate Part No.-5534645900 , Shaft Part No.-5534646600 , Lock Washer Part No.-5534665400 , Plug Part No.-5534671300 , Seal Part No.-5534673800 , Valve Part No.-5534718200 , Pin-Roll Part No.-5534719100 , Spacer Part No.-5534720500 , Dipstick Part No.-5534723000 , Pin Shaft Part No.-5534723800 , Flange Part No.-5534725600 , Housing Part No.-5534736000 , Term Ring Part No.-5534744600 , Stud Part No.-5534746400 , Cap Screw Part No.-5534747200 , Plate-Mount Part No.-5534788300 , Sealing Plug Part No.-5534825300 , Seal Part No.-5534825400 , Cable Lug Part No.-5534826000 , Cable Lug Part No.-5534826100 , Recep Connector Part No.-5534826200 , Cable Lug Part No.-5534826600 , Cable Lug Part No.-5534827300 , Plug Part No.-5534828500 , Stud Part No.-5534835600 , Receptacle Part No.-5534837700 , Plug Part No.-5534838300 , Gauge Part No.-5534843600 , Press Switch Part No.-5534843900 , Lock Washer Part No.-5534844200 , Receptacle Part No.-5534845200 , Cable Lug Part No.-5534868900 , Term Ring Part No.-5534869100 , Ext Valve Stem Part No.-5534877500 , Valve Part No.-5534877800 , Clamp Part No.-5534887800 , Spider & Brg Part No.-5534888400 , Cable Lug Part No.-5534898800 , Pressure Switch Part No.-5534903100 , Gauge Part No.-5534921400 , Cable Lug Part No.-5534941100 , Rod End Part No.-5534943500 , Bulb Part No.-5534961800 , Sender-Tempe Part No.-5535002900 , Term Ring Part No.-5535010200 , Kit-Cylinder Part No.-5535029700 , Clamp Part No.-5535033100 , Term Ring Part No.-5535033600 , Plug Part No.-5535047300 , Seal Part No.-5535052200 , Bearing Part No.-5535052800 , Housing Assy Part No.-5535068600 , Tube Part No.-5535068800 , Distr-Oil Part No.-5535068900 , Washer Part No.-5535069300 , Plug Part No.-5535069900 , Cap Part No.-5535086700 , Sender-Temp Part No.-5535100500 , Clamp Part No.-5535101600 , Valve Part No.-5535110400 , Kit-Seal Part No.-5535113900 , Gear Part No.-5535115000 , Bearing Part No.-5535115100 , Connector Part No.-5535117100 , Tool Part No.-5535141300 , Tool Part No.-5535141400 , Tool Part No.-5535141500 , Cable Lug Part No.-5535144800 , Gasket Part No.-5535145200 , Contact Housing Part No.-5535164600 , Cable Lug Part No.-5535165000 , Cap Part No.-5535165200 , Contact Housing Part No.-5535165400 , Term Ring Part No.-5535167800 , Kit-Cylinder Part No.-5535180900 , Sleeve Part No.-5535193900 , Term Ring Part No.-5535225100 , Spring Part No.-5535241100 , Fuse Part No.-5535243800 , Valve Part No.-5535265200 , Element Part No.-5535271600 , Relief Valve Part No.-5535277600 , Fitting Part No.-5535279000 , Restrictor Part No.-5535279500 , Pin-Q/R 1/4_ Part No.-5535280600 , Seal Part No.-5535284400 , Kit-Cylinder Part No.-5535297200 , Breaker Part No.-5535302000 , Stud Part No.-5535304300 , Oil Seal Part No.-5535316600 , Gasket Part No.-5535321300 , Gasket Part No.-5535321400 , O-Ring Part No.-5535336100 , Window Part No.-5535336200 , Kit Part No.-5535336300 , O-Ring Part No.-5535337800 , Plug Part No.-5535337900 , O-Ring Part No.-5535338000 , Seal Part No.-5535338300 , O-Ring Part No.-5535339000 , Rod End Part No.-5535344400 , Valve-Cushio Part No.-5535350200 , Block Part No.-5535378800 , Support Assy Part No.-5535392700 , Cup-Bearing Part No.-5535392800 , Cone-Bearing Part No.-5535392900 , Bearing Part No.-5535393100 , Bearing Part No.-5535393200 , Nut Part No.-5535402200 , Fuse Part No.-5535414500 , Connector-Y -Female Part No.-5535433800 , Spider/Brg Part No.-5535437300 , Kit-Seal Part No.-5535441500 , Bearing Part No.-5535450300 , Bearing Part No.-5535450400 , Kit-Packing Part No.-5535454200 , Filter Part No.-5535455700 , Head Part No.-5535482900 , Hydraulic Pump Part No.-5535491500 , Cable Part No.-5535491800 , Holder Part No.-5535497300 , Kit-Seal Part No.-5535497400 , O-Ring Part No.-5535508500 , Sleeve Part No.-5535509900 , Pump Drive Part No.-5535510100 , Kit O-Ring Part No.-5535511000 , Drum Assy Part No.-5535511400 , Bearing Part No.-5535511500 , Term Ring Part No.-5535515900 , Term Ring Part No.-5535516300 , Term Ring Part No.-5535516400 , O-Ring Part No.-5535518200 , Cartridge Part No.-5535518400 , O-Ring Part No.-5535518500 , O-Ring Part No.-5535519800 , Bearing Assy Part No.-5535530200 , Spider Brg Part No.-5535542400 , Yoke Part No.-5535550000 , Spider Bearing Part No.-5535552200 , Piston Ring Part No.-5535553100 , Spring Part No.-5535553200 , Plug Part No.-5535554200 , Yoke Part No.-5535561200 , Mount Part No.-5535562400 , Press Switch Part No.-5535562900 , Filter Part No.-5535570000 , Element Assembly Part No.-5535570100 , Seal Part No.-5535570300 , Seal Part No.-5535570400 , Clamp Part No.-5535574900 , Rod Part No.-5535576600 , Body-Valve Part No.-5535576800 , Clamp Part No.-5535577200 , Seal Part No.-5535583200 , Gasket Part No.-5535620700 , Belt Kit Part No.-5535625000 , Yoke-Slip Part No.-5535628300 , Bulb-24V Part No.-5535650900 , O-Ring Part No.-5535690800 , Bearing Part No.-5535692100 , Gauge Part No.-5535692800 , Spider Brg Part No.-5535720800 , Spider Brg Part No.-5535720900 , Cross Part No.-5535721000 , Valve-Check Part No.-5535721900 , Roller Brg Part No.-5535749900 , O-Ring Part No.-5535780200 , Housing Part No.-5535803900 , Clamp Part No.-5535842600 , Motor Part No.-5535858900 , Circuit Breaker Part No.-5535863300 , Valve Part No.-5535885900 , Column Part No.-5535886600 , Ring-Back Up Part No.-5535905800 , Flange Screw Part No.-5535915800 , Ring-Sealing Part No.-5535930100 , Plug Part No.-5535930800 , Ring Part No.-5535938300 , O-Ring Part No.-2650717743 , Snap Ring Part No.-5535956300 , Clamp Part No.-5535958100 , Seal Part No.-5535969800 , Valve Part No.-5535985500 , Baffle Plate Part No.-5536006400 , Sheave Part No.-5536057300 , Sleeve Part No.-5536079200 , Bearing Assy Part No.-5536088300 , Gasket Part No.-5536089500 , Ring Part No.-5536104300 , Filter Part No.-5536111800 , Element Part No.-5536132100 , Element Part No.-5536132200 , Nut Part No.-5536132300 , Clip Part No.-5536132400 , Check Part No.-5536140600 , Washer-Brg Part No.-5536154400 , Valve Part No.-5536162400 , Capscrew Part No.-5536163600 , Ring Part No.-5536168100 , Yoke Part No.-5536172500 , Flange Part No.-5536178900 , Cylinder Part No.-5536180400 , Rod End Part No.-5536182400 , Bearing Part No.-5536192700 , Flange Screw Part No.-5536193100 , Cylinder Part No.-5536209100 , Gauge Part No.-5536213600 , Grommet Part No.-5536240300 , Seal, Hub Part No.-5536250200 , Kit-Seal Part No.-5536261100 , Seal Part No.-5536272600 , Washer Part No.-5536272800 , Clamp Part No.-5536278500 , U Bolt Part No.-5536280900 , Stud Part No.-5536313300 , Cable Control Part No.-5536323600 , Sleeve Part No.-5536330500 , Light-24V Part No.-5536330900 , Term Sock Part No.-5536342600 , Hydraulic Pump Part No.-5536364700 , Cover Part No.-5536369000 , Relief Valve Part No.-5536369500 , Retainer Part No.-5536369700 , O-Ring Part No.-5536370000 , Spring Part No.-5536370900 , Ring-Seal Part No.-5536379900 , Spacer Part No.-5536380800 , Pressure Pl Part No.-5536382000 , Piston Brake Part No.-5536382100 , Clevis Part No.-5536384400 , Clamp Part No.-5536385800 , Sealing Ring Part No.-5536388700 , Valve-Pilot Part No.-5536402000 , O-Ring Part No.-5536409100 , O-Ring Part No.-5536409700 , Sleeve Part No.-5536426900 , Flange Brg Part No.-5536429500 , Gauge Part No.-5536435000 , Plug Part No.-5536442500 , Switch Part No.-5536445000 , Capscrew Part No.-5536452100 , Switch-Grn Part No.-5536457400 , Switch Part No.-5536457500 , Bearing Part No.-5536476500 , Seal Part No.-5536478900 , Plug Part No.-5536489200 , Pump/Valve Part No.-5536490900 , Separator Part No.-5536507800 , Stud Part No.-5536530200 , Spring Part No.-5536532900 , Spring Part No.-5536533000 , Disc Part No.-5536533200 , Plug Part No.-5536534900 , O-Ring Part No.-5536535200 , Valve-3 Way Part No.-5536538700 , Ring Seal Part No.-5536540900 , Bearing Part No.-5536544600 , Bulb Part No.-5536561300 , Locknut Part No.-5536576600 , Roller Part No.-5536578500 , Seal Part No.-5536610500 , Valve Part No.-5536628500 , Sleeve Part No.-5536630000 , Plate Part No.-5536634000 , Roller Part No.-5536634800 , Cone Part No.-5536636000 , Spring Part No.-5536660500 , Yoke Part No.-5536661300 , Retainer Part No.-5536679000 , Handle Part No.-5536679900 , Spring Part No.-5536691600 , Screw Part No.-5536710800 , Ring Part No.-5536710900 , Impeller Part No.-5536711000 , O-Ring Part No.-5536711100 , End Plate Part No.-5536713300 , Disc-Inner Part No.-5536713400 , Valve-Press Part No.-5536720000 , Cylinder Part No.-5536727500 , Valve-Relief Part No.-5536730800 , Motor Part No.-5536758600 , Sleeve Assy Part No.-5536758800 , Bearing Part No.-5536760200 , Flex Cplg Part No.-5536767700 , Service Kit Part No.-5536776100 , Bracket Part No.-5536782600 , Wiper Part No.-5536790900 , Pump Part No.-5536796700 , Impeller Part No.-5536803300 , Screen Part No.-5536803700 , Bearing Part No.-5536803800 , Pin Part No.-5536804400 , Kit-Seal Part No.-5536823400 , Kit-Repair Part No.-5536836300 , Sprocket Part No.-5536843000 , Manifold Block Part No.-5536843400 , Hydraulic Pump Assembly Part No.-5536847400 , Kit-O-Rings Part No.-5536860300 , Kit Part No.-5536864200 , Filter Part No.-5536866100 , Ball Bushing Part No.-5536904500 , Nut Part No.-5536913200 , Spring Part No.-5536920200 , Spool Part No.-5536920600 , Bearing Part No.-5536924400 , Seal Part No.-5536947200 , Bleeder Screw Part No.-5536953400 , Kit- O-Ring Part No.-5536954300 , Connection Part Part No.-5536974300 , Kt-Gskt/Seal Part No.-5536982500 , Kit Part No.-5536983000 , O-Ring Part No.-5536988100 , Seal Part No.-5536988800 , Kit-Sealing Part No.-5536990500 , Body Assembly Part No.-5536993200 , No Spin Assy Part No.-5536996600 , Gear Part No.-5536996900 , Flange Part No.-5536998300 , Bracket Part No.-5537001300 , Clamp Part No.-5537001800 , Clamp Part No.-5537001900 , Clamp Part No.-5537002000 , Control Cable Part No.-5537002300 , Cylinder Part No.-5537002800 , Clamp Part No.-5537011700 , Sprocket Part No.-5537012300 , Turbine Part No.-5537013800 , U-Ring Part No.-5537015300 , Valve Part No.-5537023900 , Pump, Tandem Part No.-5537039400 , Sleeve Assy Part No.-5537039600 , Gear Part No.-5537041400 , Retainer Part No.-5537042700 , Spool Part No.-5537043400 , Seal V Ring Part No.-5537050400 , Gear Part No.-5537051100 , Spring Part No.-5537052000 , Spring Part No.-5537052100 , Spring Part No.-5537052200 , Nut Part No.-5537053000 , Expand Tube Part No.-5537055800 , Ring Part No.-5537055900 , Ring-Piston Part No.-5537056000 , Ring Part No.-5537056100 , Valve Part No.-5537065700 , Valve Part No.-5537070100 , Spring Part No.-5537098600 , Spring Part No.-5537098700 , Pump-Hydraul Part No.-5537107700 , Driveline Part No.-5537107800 , Bearing Part No.-5537107900 , Clamp Part No.-5537113600 , Pin Part No.-5537118900 , Valve-Accum Part No.-5537132100 , Charging Harness Part No.-5537133500 , Ring Part No.-5537134600 , Reducer Part No.-5537135600 , Rod End Part No.-5537144300 , Seal Part No.-5537148100 , Selector Valve Part No.-5537148800 , Bearing Part No.-5537154000 , Shim Part No.-5537154500 , Shim Part No.-5537154600 , Shim Part No.-5537154700 , Gear Part No.-5537154800 , Cone Part No.-5537155000 , Baffle Part No.-5537155200 , Baffle Part No.-5537155300 , Cup Part No.-5537155400 , Cone Part No.-5537155500 , Shaft Part No.-5537155600 , Clutch Cover Part No.-5537155700 , Bearing Part No.-5537155800 , Gear Part No.-5537156000 , Pin Lock Part No.-5537156200 , Frame Part No.-5537156400 , Gear Part No.-5537156500 , Cone Part No.-5537158300 , Disc-Spring Part No.-5537158600 , Pin-Spring Part No.-5537158700 , Piston Part No.-5537158800 , Seal Part No.-5537158900 , Seal Part No.-5537159000 , Sleeve Part No.-5537159400 , Flange Part No.-5537159500 , Seal Hub Part No.-5537161000 , Pressure Switch Part No.-5537162400 , Press Switch Part No.-5537162500 , Lock Ring Part No.-5537168500 , Side Ring Part No.-5537168600 , Seat Part No.-5537168700 , Lockring Part No.-5537168800 , Lock Ring Part No.-5537169000 , Side Part No.-5537169100 , Flasher Part No.-5537169700 , Valve Part No.-5537170200 , Radiator Cap Part No.-5537170800 , Cylinder Part No.-5537175100 , Plate Part No.-5537177800 , Steel Ball Part No.-5537177900 , Bearing Part No.-5537178000 , Bearing Part No.-5537178200 , Retainer Part No.-5537178300 , Seal-Outer Part No.-5537178600 , Bearing Part No.-5537179400 , Spacer Part No.-5537179700 , Shaft Part No.-5537179800 , Cap Part No.-5537179900 , No Spin Assy Part No.-5537182200 , Nozzle Part No.-5537190600 , Bearing Part No.-5537192000 , Repair Kit Part No.-5537193100 , Seal Part No.-5537199600 , Seal-Grease Part No.-5537199700 , Pedal Attachm. Part No.-5537204700 , Spring Part No.-5537207000 , O-Ring Part No.-5537207100 , Seal-Piston Part No.-5537207300 , Seal-Piston Part No.-5537207400 , Seal Part No.-5537208700 , Eye Part No.-5537247300 , Push Rod Part No.-5537258800 , Sleeve Part No.-5537259200 , Valve Part No.-3115026200 , Protection Part No.-5537262200 , Roller Part No.-5537262600 , Pedal Part No.-5537262700 , Gear Part No.-5537271000 , Valve Part No.-5537273000 , Washer Part No.-5537274400 , Lamp-24V Part No.-5537275200 , Reducer Part No.-5537277300 , Pin Seal Part No.-5537288200 , Light Switch Part No.-5537288500 , Switch Part No.-5537289200 , Terminal Blc Part No.-5537289700 , Clevis Part No.-5537292600 , Pin Part No.-5537292800 , Bushing Part No.-5537292900 , Bushing Part No.-5537293000 , Spring Part No.-5537293100 , Spring Part No.-5537293200 , Pedal Part No.-5537294000 , Rod Part No.-5537294500 , Repair Kit Part No.-5537296100 , Valve-Press Part No.-5537297900 , Seal Part No.-5537301700 , Switch Part No.-5537302100 , Switch Part No.-5537302200 , Rubber Cap Part No.-5537302300 , Circuit Breaker Part No.-5537302900 , Valve-Press Part No.-5537307100 , Nipple Part No.-5537309200 , Nut Part No.-5537318200 , Kit-Seal Part No.-5537318400 , Ring Part No.-5537318800 , Relief Valve Part No.-5537321000 , Relief Part No.-5537321100 , Seal Part No.-5537327100 , Retainer Part No.-5537327200 , Sleeve Part No.-5537327600 , Gasket Part No.-5537327800 , Ring-Backup Part No.-5537335000 , Poppet Part No.-5537337600 , O-Ring Part No.-5537337800 , Cap Part No.-5537337900 , Nipple Part No.-5537341800 , Cap Part No.-5537341900 , Guide Part No.-5537343600 , Piston Part No.-5537343700 , Cap Stop Part No.-5537343800 , Spacer Part No.-5537343900 , Spring Part No.-5537344000 , Sleeve Part No.-5537344100 , Cover Part No.-5537344300 , Hexagon Nut Part No.-5537344800 , Pivot Part No.-5537345300 , Cover Part No.-5537345400 , Valve Part No.-5537353500 , Kit-Accum Part No.-5537360600 , Control Cove Part No.-5537361000 , Ring Part No.-5537361300 , Clip Part No.-5537373500 , Clip Part No.-5537373600 , Charging Valve Part No.-5537379400 , Gauge Part No.-5537381800 , Runner Part No.-5537386300 , Term Ring Part No.-5537386500 , Brass Plug Part No.-5537387900 , Isolator-Vib Part No.-5537392700 , Disc-Outer Part No.-5537393200 , Disc-Inner Part No.-5537393300 , Spacer Part No.-5537393800 , Spacer Part No.-5537394000 , Pocket Seal Strip Part No.-5537403700 , Cartridge Part No.-5537423100 , Kit-Seal Part No.-5537423300 , Kit-Seal Part No.-5537423400 , Manifold Part No.-5537423600 , Plug Part No.-5537428400 , Valve-Select Part No.-5537428800 , Tube Part No.-5537436100 , Valve Part No.-5537436200 , Adjusting Nut Part No.-5537443300 , Lock Part No.-5537443400 , Cup-Brg Part No.-5537443600 , Carrier Part No.-5537443700 , Cone-Bearing Part No.-5537444100 , Cup-Brg Part No.-5537444300 , Brake Assembly Part No.-5580010433 , Seal Part No.-5537445300 , V-Ring Seal Part No.-5537445500 , Carrier Part No.-5537445800 , Planet Gear Part No.-5537446200 , Snap Ring Part No.-5537454300 , Kit-Seal Part No.-5537454500 , Retainer Part No.-5537455600 , Kit-Seal Part No.-5537455800 , Relief Valve Part No.-5537455900 , Kit-Seal Part No.-5537456000 , Kit-Seal Part No.-5537456100 , Flatwasher Part No.-5537460500 , Screw Part No.-5537461700 , Back Part Part No.-5537461800 , Screw Part No.-5537461900 , Screw, Hex Head Part No.-5537462600 , Plug Part No.-5537463000 , Screw, Hex Head Part No.-5537463200 , Cup-Bearing Part No.-5537465200 , Bearing Part No.-5537465300 , Flange Part No.-5537473800 , Gasket Part No.-5537474200 , Cone Part No.-5537475000 , Stud Part No.-5537476600 , Snap Ring Part No.-5537492300 , Ring Part No.-5537492500 , Plate Part No.-5537492800 , Handle Part No.-5537499700 , Cap Part No.-5537501500 , Gasket Part No.-5537501600 , Packing Part No.-5537502400 , Packing Part No.-5537502800 , Ring Part No.-5537503000 , O-Ring Part No.-5537503700 , Lever Part No.-5537503800 , Capscrew-Hex Part No.-5537505200 , Kit Part No.-5537507700 , Kit-Seal Part No.-5537507800 , Switch-Press Part No.-5537510000 , Ring Part No.-5537519400 , Couple Part No.-5537519600 , Valve-Relay Part No.-5537534000 , Bolt/Gasket Part No.-5537538000 , Spring Part No.-5537538500 , Ring-Piston Part No.-5537538700 , Seal-Piston Part No.-5537538800 , Frct Disc Part No.-5537539100 , Reaction Pl Part No.-5537539200 , Seal-Piston Part No.-5537539300 , Piston-Brake Part No.-5537539400 , Pin Assy Part No.-5537539700 , Cover-Label Part No.-5537539900 , Kit-Seal Rin Part No.-5537540100 , Ring Part No.-5537542400 , O-Ring Part No.-5537544700 , Cartridge Part No.-5537545700 , Bushing Part No.-5537548000 , Timer Part No.-5537549300 , Suspension Part No.-5537550000 , Seal Kit Part No.-5537551300 , Adapter Part No.-5537554300 , Extension Part No.-5537558500 , Shaft Part No.-5537562100 , Plate Part No.-5537565400 , Valve-P.O.Di Part No.-5537567700 , Flange Part No.-5537569700 , Clamp Part No.-5537583500 , Bolt Part No.-5537587200 , E-Ring Part No.-5537593600 , Flash Light Part No.-5537594800 , Spider & Brg Part No.-5537597100 , Pump Adapter Part No.-5537606800 , Kit-Snapring Part No.-5537607500 , Washer Part No.-5537613700 , Bearing Part No.-5537634200 , Oil Shield Part No.-5537634400 , Bearing Cone Part No.-5537634700 , Shim-.004 Part No.-5537634800 , Piston Ring Part No.-5537635600 , Snap Ring Part No.-5537636800 , Snap Ring Part No.-5537636900 , Bearing Cone Part No.-5537637000 , Outer Race Part No.-5537637100 , Bearing Cup Part No.-5537637300 , Bearing Cone Part No.-5537637400 , Gasket Part No.-5537638000 , Spring Part No.-5537639300 , Piston Part No.-5537639500 , Snap Ring Part No.-5537639600 , Snap Ring Part No.-5537639700 , Sleeve Part No.-5537648700 , Kit-Seal Part No.-5537671400 , Gauge Part No.-5537672600 , Gauge-12V Part No.-5537672900 , Gauge Part No.-5537673100 , Spider Brg. Part No.-5537673500 , End Plate Part No.-5537677900 , Valve-Ctrl Part No.-5537678400 , Bearing Part No.-5537682700 , Plug Part No.-5537689300 , Ring Part No.-5537698500 , Snap Ring Part No.-5537698600 , Washer Part No.-5537698700 , Washer Part No.-5537698800 , Washer Part No.-5537698900 , Kit Part No.-5537700900 , Seal Kit Part No.-5537701100 , Plug Part No.-5537704700 , Plate Part No.-5537704800 , Planet Shaft Part No.-5537713100 , Cable Lug Part No.-5537713800 , Valve Part No.-5541906600 , Cap Part No.-5537718500 , Gasket Part No.-5537719600 , Kit-Spindle Part No.-5537727900 , Bearing Part No.-5537732900 , Hub Part No.-5537733300 , Thrust Washer Part No.-5537733500 , Hub Assembly Part No.-5537733700 , Seal Part No.-5537733900 , Spindle Part No.-5537734000 , Housing Part No.-5537734500 , O-Ring Part No.-5537734900 , Seal Part No.-5537741400 , Spacer Part No.-5537749700 , Bearing Part No.-5537752400 , Kit-Seal Part No.-5537754700 , Check Valve Part No.-5537754800 , Spring Part No.-5537759000 , Plug Part No.-5537777600 , Accumulator Charging Part No.-5537788800 , Speedometer Part No.-5537789000 , Brake Valve Part No.-5537789400 , Cap Part No.-5537791100 , Shaft-Axle Part No.-5537791200 , Valve Part No.-5537793000 , Bearing Cone Part No.-5537794300 , Cordgrip Part No.-5537795100 , Seal Part No.-5537795200 , Dust Shield Part No.-5537795300 , Cartridge Part No.-5537798700 , Valve-Relief Part No.-5537809300 , Valve Part No.-5537811500 , Stub Part No.-5537812600 , Air Breather Part No.-5537813200 , Plate Part No.-5580014103 , Details Part No.-5537813700 , Body Part No.-5112320239 , Alarm Part No.-5537815400 , Flange Part No.-5537826000 , Nut Part No.-5537826100 , Pinion Gear Part No.-5537826200 , Check Valve Part No.-5537828100 , Rubber Part No.-5537830000 , Plate-Brake Part No.-5537830900 , Coil-24V Part No.-5537831900 , Spring Part No.-5537834200 , Cover Part No.-5537837000 , Hub Part No.-5537838800 , Triple Tee Part No.-5537845500 , Air Chuck Part No.-5537845600 , Clutch--Pist Part No.-5537846900 , Recep Connector Part No.-5537857400 , Cable Lug Part No.-5537857500 , Term Seal Part No.-5537857600 , Plug Connector Part No.-5537857900 , Cable Lug Part No.-5537858000 , Cable Seal Part No.-5537858100 , Spring Part No.-5537862900 , Light-Blue S Part No.-5537873000 , Set Screw Part No.-5537873900 , Knock Pin Part No.-5537875000 , Dowell Pin Part No.-5537877900 , Washer -Thrust Part No.-5537879800 , Bolt Part No.-6060005252 , Diff.Kit Part No.-5537882100 , Valve Part No.-5537883300 , Pedal Part No.-5537883400 , Valve Part No.-5537883500 , Bearing Part No.-5580007703 , Spring Part No.-5537885200 , Terminal Blk Part No.-5537886500 , Spring Part No.-5537887200 , Capscrew Part No.-5537890000 , Spring Part No.-5537890100 , Valve-Lockup Part No.-5537891100 , Nut Part No.-5537892300 , Seal Part No.-5537893200 , Ring Part No.-5537894100 , Bolt Part No.-5537894200 , Roller Brg Part No.-5537894300 , Level Gauge Part No.-5537895500 , Seal Part No.-5540000800 , Seal Part No.-5540001600 , Bolt Part No.-5540001800 , Nut Part No.-5540001900 , Retainer Ring Part No.-5540002000 , Gear Ring Part No.-5540002200 , Gear Drive Part No.-5540002300 , Retaining Ring Part No.-5540002500 , Bearing Part No.-5540002600 , Bearing Part No.-5540002700 , Hub Part No.-5540003500 , Coil Part No.-5540022000 , Valve Part No.-5540025300 , Gear Part No.-5540034300 , Gear Part No.-5540034400 , Seal Kit Part No.-5540036000 , Precleaner Part No.-5540047200 , Motor Dome Part No.-5540047400 , Housing Part No.-5540051900 , Capscrew Part No.-5540054000 , Flat Washer Part No.-5540054100 , Pin Part No.-5540057200 , Bearing Part No.-5540057300 , Bearing Part No.-5540057400 , O-Ring Part No.-5540057700 , O-Ring Part No.-5540058100 , O-Ring Part No.-5540058600 , Spring Part No.-5540058700 , Bolt Part No.-5540058800 , Bolt Part No.-5540058900 , Piston Part No.-5540059100 , Friction Pl Part No.-5540059200 , Cover Part No.-5540059400 , Washer Part No.-5540059500 , Screw Part No.-5540059600 , Lock Plate Part No.-5540059700 , Lock-Ring Part No.-5540060400 , Separator Part No.-5540060500 , Nut Part No.-5540060600 , Washer Part No.-5540060700 , Cover Part No.-5540061000 , Bolt Part No.-5540061200 , Bolt Part No.-5540061300 , Not Del. Sep. Part No.-5540061500 , Dowel Pin Part No.-5540062800 , Spindle Part No.-5540063200 , Plate Part No.-5540063600 , Cable Lug Part No.-5540066700 , Valve Part No.-5540067100 , Valve Part No.-5540067200 , Magnet Part No.-5540067500 , O-Ring Part No.-5540069500 , Bearing Part No.-5540069600 , O-Ring Part No.-5540073500 , Retainer Part No.-5540074900 , Flange Part No.-5540076300 , Gasket Part No.-5540076400 , Lock Nut Part No.-5540077700 , Ring Part No.-5540079300 , Shaft Part No.-5540079800 , Sensor Plug Part No.-5540081000 , Drum-Clu Part No.-5540081500 , Bolt Part No.-5540082000 , Spring Part No.-5540082500 , Lock Up & Mo Part No.-5540082900 , Mounting Pla Part No.-5540083000 , Valve Part No.-5580101857 , Screen Part No.-5540083900 , Screw, Hex Head Part No.-5540084600 , Retainer Ring Part No.-5540087700 , Washer Part No.-5540087900 , Valve Part No.-5540088200 , Ring Part No.-5540088300 , Ring Part No.-5540088500 , Ring Part No.-5540088700 , Valve Part No.-5540090600 , Spacer Part No.-5540091700 , Driver Key Part No.-5540095500 , Kit-Pinion & Part No.-5540096500 , Clamp Part No.-5540099600 , Piston Part No.-5540099900 , Gear Wheel Part No.-5540100800 , Bearing Part No.-5540100900 , Washer Part No.-5540101000 , Set Screw Part No.-5540101300 , Bolt Part No.-5540101600 , Bolt Part No.-5540101700 , Bolt Part No.-5540101800 , Washer Part No.-5540113000 , Lock Ring Part No.-5540113700 , Gauge Part No.-5540118600 , Gauge Part No.-5540118700 , Connector Lock Part No.-5540119200 , Valve Part No.-5540121200 , Fibro-Mount Part No.-5540127700 , Clutch Hub Part No.-5540129200 , Screw, Hex Head Part No.-5540130700 , Gasket Part No.-5540130900 , Screw Part No.-5540131000 , Screw Part No.-5540131100 , Retainer Part No.-5540131400 , Lock Washer Part No.-5540131900 , Switch Part No.-5540132800 , Switch Part No.-5540133000 , Switch Part No.-5540133300 , Gasket Part No.-5540133500 , Pump Part No.-5590017593 , Valve Part No.-5540135600 , Circuit Breaker Part No.-5540137200 , Screw, Hex Head Part No.-5540163400 , Check Valve Part No.-5540164300 , Hexagon Nut Part No.-5540164900 , Spring Part No.-5540165700 , Gear Ring Part No.-5540166900 , Washer Part No.-5540167400 , Gasket Seal Part No.-5540168500 , Cartridge Part No.-5540169200 , Hinge Assembly Part No.-5540175400 , Valve Part No.-5540176400 , Valve Part No.-5540849900 , Screw, Hex Head Part No.-5540204700 , Screw, Hex Head Part No.-5540208300 , Clamp Part No.-5540210200 , Seal O-Ring Part No.-5540214600 , Glass Part No.-5540215400 , Ring Part No.-5540225900 , Gauge-Sight Part No.-5540228900 , Capscrew Part No.-5540243100 , Oil Seal Part No.-5540261800 , Bearing Part No.-5540266100 , Ring Gear Part No.-5540266200 , Shim Kit Part No.-5540266300 , Dust Cover Part No.-5540266400 , Collar Part No.-5540266600 , Planet Gear Part No.-5540267600 , Ring Gear Part No.-5540267900 , Drive Gear Part No.-6060004776 , Bearing Part No.-5540268100 , Bearing Part No.-5540268800 , Gear Part No.-5540279200 , Roller Brg Part No.-5540280700 , Brg Cone Part No.-5540284800 , Ring Part No.-5540291400 , Gauge Part No.-5540293100 , Check Valve Part No.-5540294400 , Cartridge Part No.-5540294600 , Seal Kit Part No.-5540294800 , Impeller Part No.-5540296100 , Ring Part No.-5540297300 , Yoke Part No.-5540297500 , Bearing Part No.-5540298300 , Bolt Part No.-5540309000 , Bolt Part No.-5540309200 , Lamp Part No.-5540380400 , Ret Ring Part No.-5540382100 , Diff Case Part No.-5540382700 , Lock Ring Part No.-5540383200 , Bearing Part No.-5540383300 , Collar Kit Part No.-5540383500 , Oil Seal Part No.-5540383600 , Light-Tail Part No.-5540385800 , Valve Part No.-5540386700 , Pressure Switch Part No.-5540387600 , Connector Part No.-5540387700 , Term Spad Part No.-5540387800 , Connector Part No.-5540387900 , Bearing Part No.-5540391200 , Bearing Part No.-5540391300 , Seal Part No.-5540391500 , Plug Part No.-5540391600 , Wiper Shaft Part No.-5540392600 , Wiper Blade Part No.-5540392700 , Pivot Guide Part No.-5540392800 , Eye-Reach Part No.-5540394300 , Bearing Part No.-5540396200 , Nozzle-Water Part No.-5540399400 , Wiper Arm Part No.-5540400700 , Wiper Blade Part No.-5540400800 , Seal Part No.-5540404300 , Light Hsg Part No.-5540406500 , Fan Part No.-5540406600 , Bearing Cup Part No.-5540413200 , Bearing Part No.-5540413300 , Cable Lug Part No.-5540417000 , Screw, Hex Head Part No.-5540419800 , Ignition Switch Part No.-5540426000 , Circuit Breaker Part No.-5540429900 , Screw, Hex Head Part No.-5540433500 , Gasket Part No.-5540434900 , Tube Part No.-5540435000 , Seal Part No.-5540435100 , Capscrew Part No.-5540435200 , Capscrew Part No.-5540435300 , Valve Part No.-3092631628 , Seal Kit Part No.-5540456600 , Gasket Part No.-5540457900 , Kit Part No.-5540459500 , Roller Part No.-5540459600 , Kit Part No.-5540459700 , Recep Connector Part No.-5540459800 , Cable Lug Part No.-5540459900 , Screw, Hex Head Part No.-5540462700 , Accumulator Part No.-5540463200 , Pulley Part No.-5540465900 , Connector Part No.-5540471100 , Connector Part No.-5540471200 , Cover Part No.-5540471300 , Mount Part No.-5540471400 , Cable Part No.-5540471900 , Alarm Part No.-5540472200 , Spring Part No.-5540475400 , Spacer Part No.-5540476000 , Ring Part No.-5540476100 , Support Part No.-5540476200 , Bearing Part No.-5540476400 , Clutch Assy. Part No.-5540476700 , Bearing Part No.-5540476800 , Hub Part No.-5540476900 , Ring Part No.-5540477000 , Ring Part No.-5540477100 , Washer Part No.-5540477200 , Washer Part No.-5540477300 , Washer Part No.-5540477400 , Shaft Gear Part No.-5540477600 , Screw, Hex Head Part No.-5540478000 , Screw, Hex Head Part No.-5540491600 , Recep Connector Part No.-5540492600 , Cavity Plug Part No.-5540492700 , Cap-Protect Part No.-5540492800 , Socket Part No.-5540493000 , Contact Housing Part No.-5540493200 , Connect. Cover Part No.-5540493600 , Connector Part No.-5540493700 , Fuse Part No.-5540502300 , Bearing Part No.-5540502400 , Receptacle Part No.-5540503000 , Plug Part No.-5540503100 , Brg Cup Part No.-5540503300 , Spring Part No.-5540503600 , Term Spad Part No.-5540503800 , Hub/Cup Part No.-5540511400 , Spindle Part No.-5540511600 , Gear Part No.-5540519100 , Gear Part No.-5540519200 , Spring Part No.-5540524800 , Seal Part No.-5540527100 , Valve-Needle Part No.-5540546900 , Locktite Part No.-5540547100 , Screw Part No.-5540547300 , Lock Nut Part No.-5540551000 , Screw Part No.-5540551100 , Link-Alt Part No.-5540552300 , Bearing Part No.-5540552500 , Housing Part No.-5540552700 , Washer Part No.-5540553500 , Valve Part No.-5540557500 , Spacer Part No.-5540559200 , Separator Part No.-5540560200 , Washer Part No.-5540560700 , Bearing-Pres Part No.-5540562900 , Bearing Asse Part No.-5540563000 , Bearing Part No.-5540563100 , Capscrew Part No.-5540564200 , Kit-Bearing Part No.-5540570600 , Capscrew Part No.-5540577200 , Capscrew Part No.-5540580700 , Breather Part No.-5537813200 , Holder-Rgear Part No.-5540590100 , Collar Part No.-5540590400 , Planet Carrier Part No.-5540592000 , Carrier Part No.-5540592100 , Shaft Part No.-5540592200 , Stud Part No.-5540592400 , Nut Part No.-5540592500 , Lock Part No.-5540598000 , Socket Part No.-5540599300 , Valve Part No.-5540609700 , Element Part No.-5540611700 , Kit-Seal Part No.-5540611800 , Valve Part No.-5540612500 , Valve Part No.-5540612600 , Plug Connector Part No.-5540614500 , Cable Seal Part No.-5540614600 , Connector Lock Part No.-5540614700 , Check Valve Part No.-5540616800 , Pressure Switch Part No.-5540626400 , Seal Kit Part No.-5540631500 , Valve Part No.-5540632200 , Gauge Part No.-5540633400 , Ring Part No.-5540636600 , Valve Part No.-5540637400 , Pipe Part No.-5540637500 , Gear Part No.-5540642000 , Screw, Hex Head Part No.-5540643900 , Plug Connector Part No.-5540645600 , Recep Connector Part No.-5540645700 , Cable Lug Part No.-5540645800 , Cable Lug Part No.-5540645900 , Cable Seal Part No.-5540646000 , Kit-Plug Part No.-5540647800 , Collector Part No.-5540647900 , Fuse Part No.-5540649100 , Valve-Brake, Part No.-5540649700 , Capscrew Part No.-5540652800 , Cable Lug Part No.-5540654800 , Term Ring Part No.-5540655100 , Splice Part No.-5540655500 , Cable Lug Part No.-5540657800 , Cable Lug Part No.-5540661700 , Spring Part No.-5540661900 , Ball Bushing Part No.-5540662000 , Starter Part No.-5540663100 , Ring Part No.-5540667900 , Relay Part No.-5540669200 , Relay Part No.-5540669300 , Capscrew Part No.-5540669500 , Lock Nut Part No.-5540669600 , Temp Valve Part No.-5540671000 , Oring Part No.-5540674400 , Pump Part No.-5540679100 , Cover Part No.-5540681400 , Spring Part No.-5540681500 , Back Part Part No.-5540690000 , Capscrew Part No.-5540690100 , Cover Part No.-5540690200 , Cable Lug Part No.-5540690700 , Valve Part No.-5540691600 , Bearing Reta Part No.-5540701900 , Gasket Part No.-5540710200 , Clamp Part No.-5540716000 , Repair Kit Part No.-5540718300 , Seal Kit Part No.-5540732300 , Check Valve Part No.-5540734800 , Flasher Part No.-5540735500 , Pin Part No.-5540740400 , Socket Part No.-5540740500 , Pin Part No.-5540740600 , Socket Part No.-5540740700 , Drive Plate Kit Part No.-5540743800 , Shaft Part No.-5540752300 , Shaft Part No.-5540752400 , Seal Kit Part No.-5540752600 , O-Ring Part No.-5540753100 , Seal Kit Part No.-5540753500 , Nut-Adj Part No.-5540755500 , Gear Set Part No.-5540758800 , Bearing Part No.-5540759100 , Adjusting Nut Part No.-5540759200 , Shim Kit Part No.-5540759300 , Retainer Part No.-5540759500 , Spacer Kit Part No.-5540759600 , Collar Kit Part No.-5540759700 , Collar Part No.-5540759800 , Flange Part No.-5540760800 , Washer Part No.-5540761400 , Brake Part No.-5540761500 , O-Ring Part No.-5540761600 , Oil Cooler Part No.-5540780400 , Gasket Part No.-5540784100 , Washer Part No.-5540784400 , Cap-Fuel Part No.-5540785700 , Knob Part No.-5540787600 , Valve-Check Part No.-5540787800 , Seal Kit Part No.-5540787900 , Valve Part No.-5540789400 , Block-Term Part No.-5540789500 , Cable Lug Part No.-5540793400 , Valve Part No.-5540794600 , Pump Part No.-5540804300 , Pressurizer Part No.-5540804700 , Connector Part No.-5540808700 , Bearing Part No.-5540809400 , Knob Part No.-5540809500 , Shaft-Input Part No.-5540810800 , Flange Part No.-5540811600 , Lock Ring Part No.-5540811700 , Yoke Part No.-5540812700 , Gear Control Part No.-5540813600 , Valve Part No.-5575701840 , Cable Lug Part No.-5540815500 , Capscrew Part No.-5540816600 , Recep Connector Part No.-5540819400 , Pump-Primer Part No.-5540820100 , Gauge Part No.-5540822700 , Accel. Pedal Part No.-5540829300 , Bolt Part No.-5530850600 , Adapter Ring Part No.-5540831000 , Bearing Part No.-5540831300 , Bearing Part No.-5533972900 , Retainer Part No.-5540831800 , Bearing Part No.-5540832200 , Retainer-Brg Part No.-5540834500 , Housing-Cove Part No.-5540835000 , Seal Kit Part No.-5540835300 , Valve-Check Part No.-5540836500 , Bearing Part No.-5540836900 , Connector Lock Part No.-5540837000 , Cable Seal Part No.-5540837100 , Collar Part No.-5540839700 , Carrier Part No.-5540840100 , Cover Part No.-5540844200 , Splice Kit Part No.-5540844900 , Seal Plug Part No.-5540846200 , Boot Part No.-5540848900 , Kit Part No.-5540849900 , Spring Part No.-5540850700 , Spring Part No.-5540851600 , Shim Part No.-5540852300 , Snap Ring Part No.-5540852500 , Spring Part No.-5540852600 , Cover Part No.-5540852700 , Shaft Part No.-5540852900 , Connector Part No.-5540859300 , Connector Lock Part No.-5540859400 , Cable Lug Part No.-5540859500 , Connector Part No.-5540859600 , Connector Lock Part No.-5540859700 , Cable Lug Part No.-5540859800 , Disc Part No.-5540863500 , Disc Part No.-5540863600 , Washer Part No.-5540865300 , Flange Part No.-5540876800 , Couple Part No.-5540878500 , Defroster Part No.-5540882000 , Ring-Back-Up Part No.-5540887300 , Seal-O Ring Part No.-5540887400 , Seal-O Ring Part No.-5540887500 , Seal Part No.-5540887700 , J Block Part No.-5540888100 , Seal Part No.-5540888700 , Hub & Cup As Part No.-5540890700 , Valve-Dump Part No.-5540891000 , Valve Part No.-5540891200 , Carrier/Cap Part No.-5540893200 , Filter Part No.-5540894500 , Filter Part No.-5540894700 , Mount-2 Pc Part No.-5540896400 , Bearing Part No.-5540898100 , Cover Part No.-5540901200 , Threaded Sleeve Part No.-5540902100 , Stator Part No.-6060006385 , Heat Shield Part No.-5540906800 , Filter Holder Part No.-5540907300 , Probe Part No.-5540907500 , Shield-Heat Part No.-5540908500 , Cable Lug Part No.-5540908600 , Cable Lug Part No.-5540908700 , Cable Lug Part No.-5540908800 , Cable Lug Part No.-5540908900 , Cable Lug Part No.-5540909000 , Spool Part No.-5540911300 , Valve Part No.-5540912700 , Seal Part No.-5540913200 , Collar Part No.-5540914300 , Cover Part No.-5540914500 , Lock Part No.-5540914700 , Cable Lug Part No.-5540915100 , Seal Part No.-5540915300 , Housing Part No.-5540915500 , Bearing-Roll Part No.-5540915600 , Retainer Part No.-5540915700 , Housing Part No.-5540916400 , Valve-Main C Part No.-5540916900 , Valve Assy Part No.-5540917300 , Control Part No.-5540922300 , Kit-Ring Gea Part No.-5540922800 , Washer Part No.-5540923600 , Plug Connector Part No.-5540924700 , Protect.Bellows Part No.-5540926600 , Housing- Part No.-5540928300 , Tool Part No.-5540928400 , Tachometer Part No.-5540935000 , Motor-Wiper Part No.-5540935100 , Grease Pump Part No.-5540937600 , Carrier Kit Part No.-5540938900 , Wheel Chocks Part No.-5540941700 , Ring Part No.-5540942900 , Fuse Part No.-5540944800 , Piston Ring Part No.-5540945400 , Cap Part No.-5540946600 , Yoke Part No.-5540948800 , Cable Lug Part No.-5540949200 , Cable Ties Part No.-5540951100 , Cover W/Thru Part No.-5540953600 , Ring Part No.-5540956600 , Repair Kit Part No.-5540957900 , Pump-Tandem Part No.-5540958400 , Washer Part No.-5540959800 , Seal Kit Part No.-5540960100 , Stud Part No.-5540960300 , Bearing Cone Part No.-5540961600 , Bearing Cone Part No.-5540961700 , Retainer/Cov Part No.-5540961900 , Washer Part No.-5540962000 , Plate-Thrust Part No.-5540962200 , Cup-Bearing Part No.-5540962900 , Cone-Bearing Part No.-5540963000 , Cone-Bearing Part No.-5540963100 , Cup-Bearing Part No.-5540963200 , Cone-Bearing Part No.-5540963400 , Yoke Group( Part No.-5540965400 , Gauge Part No.-5540966700 , Pedal & Base Part No.-5540967100 , Washer Part No.-0300013100 , Sleeve Part No.-5540977300 , Setscrew Part No.-5540978600 , Ring-Snap Part No.-5540978800 , Turbine Part No.-5540980300 , Yoke-8.5C Part No.-5540980800 , Gear Part No.-5540982800 , Gear Part No.-5540983000 , Shaft Part No.-5540983800 , Hanger Part No.-5540984300 , Exhaust Deflect Part No.-5540985000 , Retainer Part No.-5540987200 , Seal-V Ring Part No.-5540992300 , Indicator Part No.-5540993400 , Shock Absorb Part No.-5540993700 , Gasket Part No.-5540994500 , Gasket Part No.-5540994600 , Washer Part No.-5540994700 , Seal Washer Part No.-5540994800 , Kit Part No.-5540995600 , Breaker Circuit Part No.-5541005000 , Breaker Circuit Part No.-5541005100 , Steering Whl Part No.-5541005200 , Center Cap Part No.-5541005300 , Capscrew Part No.-5541006700 , Bearing Asse Part No.-5541006900 , Connector Part No.-5541007100 , Connector Part No.-5541007200 , Connector Part No.-5541007600 , Connector Part No.-5541008000 , Connector Part No.-5541008200 , Pump-Gear Part No.-5541008500 , Pedal-Brake Part No.-5541009300 , Valve-Steer Part No.-5541009700 , Connector Part No.-5541012600 , Connector Part No.-5541012800 , Connector Part No.-5541012900 , Lock Part No.-5541013200 , Lock Part No.-5541013300 , Lock Part No.-5541013400 , Switch Part No.-5541015400 , Seal-Rod Wip Part No.-5541016300 , Belt Kit Part No.-5541017900 , Grommet Part No.-5541018200 , Valve Part No.-5541018400 , Valve Part No.-5541018500 , Pump Part No.-5541018700 , Steer Wheel Part No.-5541019500 , Knob Part No.-5541019700 , Bearing-Spid Part No.-5541020900 , Bearing-Pill Part No.-5541023400 , Screw, Hex Head Part No.-5541024900 , Seal-Oil-C Part No.-5541026500 , Connector Lock Part No.-5541027500 , Connector Part No.-5541028600 , Connector Lock Part No.-5541028700 , Connector Lock Part No.-5541028800 , Oilseal-Cann Part No.-5541029800 , Screw, Hex Head Part No.-5541032200 , Purifier Part No.-5541032400 , Recep Connector Part No.-5541034200 , Connector Lock Part No.-5541034500 , Connector Part No.-5541034700 , Connector Part No.-5541035000 , Connector Lock Part No.-5541035400 , Bearing-Spid Part No.-5541035900 , Capscrew-Hex Part No.-5541036000 , Manifold Part No.-5541036500 , Boot Part No.-5541036700 , Boot Part No.-5541036900 , Boot Part No.-5541037000 , Boot Part No.-5541037100 , Boot Part No.-5541037200 , Boot Part No.-5541037300 , Oilseal Part No.-5541041500 , Seal-Oil Part No.-5541041700 , Plug Connector Part No.-5541042800 , Mount - Cent Part No.-5541042900 , Pump Part No.-5541044800 , Screw, Hex Head Part No.-5541045700 , Seal Part No.-5541048600 , Seal-Pin Part No.-5541048800 , Terminal Blo Part No.-5541048900 , Stop Part No.-5541049000 , Connection Part Part No.-5541049200 , Contact Housing Part No.-5541049500 , Contact Hous Part No.-5541049600 , Seal Part No.-5541052400 , Seal-Pin Part No.-5541052500 , Valve-Ctrl Part No.-5541052700 , Valve-Check Part No.-5541053000 , Busbar Part No.-5541056300 , Receptacle Part No.-5541056700 , Gasket Part No.-5541057400 , Flow Control Part No.-5541057600 , Busbar Part No.-5541059400 , Receptacle Part No.-5541059500 , Seal-Pin Part No.-5541060200 , Valve-Cntrl Part No.-5541062300 , Bleeder Part No.-5541064100 , Spring-Compr Part No.-5541070000 , Plate Part No.-5541070400 , Connector Part No.-5541070600 , Grommet-5/16 Part No.-5541072200 , Seal Part No.-5541073300 , Valve Part No.-5541076600 , Terminal Part No.-5541077600 , Capscrew Part No.-5541078200 , Valve-Needle Part No.-5541078600 , Switch Part No.-5541078700 , Attachment Nut Part No.-5541079100 , Capscrew Part No.-5541081000 , Capscrew Part No.-5541081400 , Capscrew Part No.-5541081500 , Capscrew Part No.-5541082400 , Spring Washer Part No.-5541083700 , Spring Washer Part No.-5541083800 , Linch Pin W/ Part No.-5541085200 , Plain Washer Part No.-5541085300 , Connector Part No.-5541086200 , Recr/Drier Part No.-5541087600 , Contact Housing Part No.-5541089000 , Connector Part No.-5541089600 , Connector Part No.-5541089700 , Adapter Part No.-5541089800 , Spring Part No.-5541090700 , Valve - Part No.-5541092200 , Belt Part No.-5541092400 , Contact Bloc Part No.-5541092600 , Switch-Temp Part No.-5541093000 , Solenoid Part No.-5541093600 , Weld Stud Part No.-5541100700 , Seal Washer Part No.-5541103300 , Baffle Plate Part No.-5541104100 , Baffle Plate Part No.-5541104200 , Seal Kit Part No.-5541111200 , Set Part No.-5541111900 , Brake Unit Part No.-5541113500 , Cover Part No.-5541113600 , Quad-Ring Part No.-5541116100 , Quad Ring Part No.-5541116200 , Quad-Ring Part No.-5541116300 , Quad-Ring Part No.-5541116400 , Quad-Ring Part No.-5541116500 , Section-Inle Part No.-5541119800 , Section Part No.-5541120300 , Valve-Relief Part No.-5541120600 , Kit-Seal Part No.-5541120900 , Seal Kit Part No.-5541121000 , Kit-Seal Part No.-5541121100 , Kit-Seal Part No.-6060015161 , Stud Assy Part No.-5541122400 , Seal-Hub Fac Part No.-5541123500 , Seal-V Ring Part No.-5541123900 , Dust Shield- Part No.-5541124000 , Shaft-Planet Part No.-5541124400 , Seal Part No.-5541127000 , Kit-Seal Part No.-5541128400 , Boot Part No.-5541129600 , Boot Part No.-5541129700 , Packing Part No.-5541130800 , Kit-Seal Part No.-5541132700 , Shim Set Part No.-5541133300 , Sensor-Speed Part No.-5541138100 , Mount Part No.-5541138700 , Valve-Relief Part No.-5541138900 , Gear Hub Part No.-5541139500 , Lock-Brg Part No.-5541139800 , Gear Part No.-5541139900 , Bolt-Plated Part No.-5541140900 , Retainer Part No.-5541141200 , Lock Nut Part No.-5541143300 , Capscrew Part No.-5541143800 , Washer Part No.-5541143900 , Cap Part No.-5541162200 , Bolt Part No.-5541162300 , Washer Part No.-5541162400 , Bolt Part No.-5541162500 , Screw Part No.-5541163500 , Cartridge Part No.-5541165700 , Valve-Check Part No.-5541165800 , Valve-Check Part No.-5541166000 , Spider & Brg Part No.-5541171300 , Carrier Brg Part No.-5541171400 , Valve-Check Part No.-5541172700 , Valve-Relief Part No.-5541172800 , Gasket Part No.-5541180200 , Roller Part No.-5541185700 , Seal Part No.-5541187500 , Breather Part No.-5541188000 , Gasket Part No.-5541190900 , Gasket Part No.-5541191000 , Pump Part No.-5541197500 , Gasket Part No.-5541198500 , Bearing Part No.-5541200200 , Strainer-Ass Part No.-5541200800 , Ring Part No.-5541202900 , Solenoid Part No.-5541203200 , Bearing Part No.-5541203400 , Bearing Part No.-5541203600 , Bearing Part No.-5541203700 , Bearing Part No.-5541205200 , Bearing Part No.-5541205300 , Shoulder Screw Part No.-5541210800 , Plate Part No.-5541214600 , Stud Part No.-5541215800 , Stud Part No.-5541216000 , Drive Plate Part No.-5541216200 , Cap-Filler Part No.-5541217100 , Drive Plate Part No.-5541218200 , Stud-Dbl End Part No.-5541222100 , Switch Part No.-5541226000 , Ring Part No.-5541227200 , Ring Part No.-5541227300 , Seal Part No.-5541227900 , Bearing Cup Part No.-5541229100 , Bearing Cone Part No.-5541229200 , Plate Part No.-5541232900 , Valve Part No.-5541233100 , Plate Part No.-5541233200 , Valve Part No.-5541233300 , Plate Part No.-5541233400 , Indicator Part No.-5541233600 , Valve Part No.-5541233700 , Valve Part No.-5541233800 , Capscrew Part No.-5541239800 , Lock Nut Part No.-5541240100 , Piston Part No.-5541240200 , Protection Part No.-5541244400 , Cap-Grease Part No.-5541244700 , Relief Assy Part No.-5541244800 , Housing-Pump Part No.-5541245400 , Kit Part No.-5541245700 , Kit Part No.-5541245800 , Kit Part No.-5541245900 , Kit Part No.-5541246000 , Motor Kit Part No.-5541246100 , Gasket Part No.-5541247900 , Adapter Part No.-5541248600 , Ring-Key Part No.-5541250700 , Receptacle Part No.-5541255400 , Bushing Part No.-5541263900 , Bushing Part No.-5541264000 , Kit-Repair-E Part No.-5541265400 , Kit-Repair Part No.-5541265500 , Housing Part No.-5541265700 , Dust Cap Part No.-5541269500 , Cap Part No.-5541269600 , Driveline As Part No.-5506946200 , Disc-Clutch Part No.-5541285800 , Dust Cap Part No.-5541289000 , Connector Part No.-5541297900 , Shaft-Axle Part No.-5541298000 , Valve Part No.-5541298100 , Cable Lug Part No.-5541304800 , Cable Lug Part No.-5541304900 , Cup-Brg Part No.-5541307500 , Seal Kit Part No.-5541310100 , Ring Part No.-5541311200 , Valve Part No.-5541316900 , Valve Part No.-5541317000 , Tie Rod Kit Part No.-5541317100 , Cover, Wiper Part No.-5541317200 , Relay Part No.-5541317300 , Cable Ties Part No.-5541317400 , Valve-Expans Part No.-5541321100 , Thermostat-A Part No.-5541321200 , Ring-Entry Part No.-5541321900 , Wheel-Blower Part No.-5541322000 , Switch-Press Part No.-5541322800 , Panel-Circui Part No.-5541323700 , Relay Part No.-5541323800 , Harness-Wiri Part No.-5541324100 , Motor-Hyd Part No.-5541324700 , Solenoid Part No.-5541325000 , Seal Part No.-5541328400 , Piston Ring Part No.-5541328700 , Piston Ring Part No.-5541328800 , Kit-Repair Part No.-5541334300 , Lock Nut Part No.-5541334400 , Lock Ring Part No.-5541335900 , O-Ring Part No.-5541336500 , Bushing Part No.-5541336700 , Kit-Repair Part No.-5541336900 , Contact Housing Part No.-5541337800 , Seal Kit Part No.-5541342700 , Flange Assy Part No.-5541347900 , Capscrew Part No.-5541348000 , Plate Part No.-5541348100 , Gasket Part No.-5541349500 , Cartridge-Va Part No.-5541349700 , Boot Part No.-5541349800 , Gasket Part No.-5541349900 , Receptacle Part No.-5541350600 , Contact Housing Part No.-5541351200 , Removal Tool Part No.-5541351600 , Bearing-Spid Part No.-5541352200 , Seal-Piston Part No.-5541353100 , Gear Part No.-5541353400 , Bearing Part No.-5541353500 , Ring-Snap Part No.-5541353700 , Gasket Part No.-5541354200 , Gasket Part No.-5541355600 , Light-Pilot Part No.-5541359700 , Spring Part No.-5541359800 , Pump Part No.-5541363900 , Nut Part No.-5541364100 , Carrier-Plnt Part No.-5541364400 , Kit-Seal Part No.-5541366200 , Ring-Quad Part No.-5541367300 , Ring-Quad Part No.-5541367400 , Ring-Quad Part No.-5541367500 , Gasket Part No.-5541369800 , Gasket Part No.-5541369900 , Gasket Part No.-5541372100 , Piston Part No.-5541374200 , Adapter Part No.-5541376900 , Cup Part No.-5541377900 , Quad-Ring Part No.-5541380300 , Capscrew Part No.-5541382300 , Yoke Part No.-5541383000 , Stem Part No.-5541384600 , Connector Part No.-5541391500 , Contact Housing Part No.-5541391600 , Plastic Rece Part No.-5541391800 , Plastic Recept Part No.-5541391900 , Receptacle Part No.-5541392000 , Plastic Recept Part No.-5541392100 , Contact Housing Part No.-5541392200 , Contact Housing Part No.-5541392300 , Plastic Recept Part No.-5541392400 , Contact Housing Part No.-5541392500 , Contact Housing Part No.-5541392900 , Plastic Plug Part No.-5541393000 , Wagner Part Part No.-5541393300 , Plastic Plug Part No.-5541393700 , Plastic Plug Part No.-5541393800 , Contact Housing Part No.-5541393900 , Plug Connector Part No.-5541394000 , Grip-Door Part No.-5541394600 , Lock Nut Part No.-5541396800 , Capscrew Part No.-0147136407 , O-Ring Part No.-5541398200 , Bearing Part No.-6060005719 , Bearing Part No.-5541865800 , Breather Part No.-2659677831 , Mounting Part No.-5541403700 , Cross Part No.-5541404500 , Circuit Breaker Part No.-5541414200 , Piston Part No.-5541415900 , Drive Plate Part No.-5541418200 , Seal-Oil Part No.-5541418800 , Valve Assy-R Part No.-5541419300 , Linkage Part No.-5541420300 , Light-Inter Part No.-5541421100 , Screw, Hex Head Part No.-5541429600 , Bearing Ball Part No.-5541429700 , Seal Part No.-5541430200 , Snap Ring Part No.-5541430700 , Bolt Part No.-5541436300 , Seal Kit Part No.-5541436700 , Coil Part No.-5541436800 , Seal V-Ring Part No.-5541443100 , Valve Part No.-5541448100 , Sensor Part No.-5541448500 , Kit-Diff Part No.-5541449100 , Guard Part No.-5541452700 , Ring Part No.-5541452800 , Breather Part No.-2659677831 , Gasket & Sea Part No.-5541456200 , Cartridge Part No.-5541459000 , Seal Kit Part No.-5541459800 , Seal Kit Part No.-5541460000 , Cap-Rain Part No.-5541466600 , Bearing Part No.-5541469600 , Bearing Part No.-5541469700 , Tube Part No.-5541470700 , Tube Part No.-5541470800 , Shaft-Axle Part No.-5541471900 , Cup-Bearing Part No.-5541473100 , Thrust Washer Part No.-5541473200 , Roller Part No.-5541474300 , Spider Part No.-5541474400 , Diff Case Part No.-5541474500 , Service Kit Part No.-5541485600 , Gauge Part No.-5541485700 , Gear-Idler Part No.-5541486500 , Oil Seal Part No.-5541488900 , Plate Part No.-5541489000 , Yoke Part No.-5541489900 , Seal Kit Part No.-5541495000 , Valve Part No.-5541495500 , Bearing Part No.-5541501600 , Sleeve Part No.-5541503500 , Sleeve Part No.-5541503600 , Sleeve Part No.-5541503700 , Gasket Part No.-5541504500 , Stud Part No.-5541506200 , Gasket Part No.-5541506300 , Screen/Plug Part No.-5541506600 , Gasket Part No.-5541506700 , Bushing Part No.-5541506800 , Bearing Part No.-5541508100 , Ring Part No.-5541508200 , Tube Part No.-5541508400 , Shaft Part No.-5541508900 , Snap Ring Part No.-5541509600 , Shaft, Drum, Part No.-5541510300 , Seal Part No.-5541510700 , Seal Part No.-5541510800 , Disc Part No.-5541511000 , Spring Part No.-5541511200 , Snap Ring Part No.-5541511300 , Spring Part No.-5541511400 , Retainer Part No.-5541511500 , Cone Part No.-5541511700 , Cup Part No.-5541511800 , Ring Part No.-5541511900 , Ring Part No.-5541512000 , Ring Part No.-5541512100 , Ring Part No.-5541512200 , Ring Part No.-5541512300 , Ring Part No.-5541512400 , Bearing Part No.-5541512500 , Ring Part No.-5541512700 , Bearing Part No.-5541513300 , Cap Part No.-5541513400 , Clutch Pisto Part No.-5541513800 , Seal Part No.-5541513900 , Plate Part No.-5541514000 , Bearing Part No.-5541514100 , Ring Part No.-5541514200 , Hub Part No.-5541514300 , Retainer Part No.-5541514400 , Ring Part No.-5541514500 , Clutch Assy Part No.-5541514600 , Bearing Part No.-5541515000 , Spacer Part No.-5541515100 , Cap Part No.-5541515200 , Cone Part No.-5541515800 , Cup Part No.-5541515900 , Bearing Assy Part No.-5541516000 , Bearing Part No.-5541516100 , Ring Part No.-5541516200 , Bearing Part No.-5541516900 , Ring Part No.-5541517000 , Bearing Part No.-5541517100 , Ring Part No.-5541517200 , Shaft Part No.-5541517500 , Cup Part No.-5541517600 , Cone Part No.-5541517700 , Stud Part No.-5541517800 , Cap Part No.-5541518300 , Cap Part No.-5541518400 , Valve & Pump Part No.-5541518500 , Tube Part No.-5541518600 , Gasket Part No.-5541518700 , Retainer Part No.-5541518800 , Valve -Press Part No.-5541520200 , Pump-Chargin Part No.-5541520300 , Gear & Shaft Part No.-5541521300 , Gear & Shaft Part No.-5541521400 , Bolt Part No.-5541521600 , Coupling Part No.-5541523500 , Bearing Part No.-5541528400 , Ring-Retaini Part No.-5541528500 , Shaft-Axle Part No.-5541528700 , Gear-Sun Part No.-5541528800 , Diff & Carri Part No.-5541529000 , Diff & Carri Part No.-5541529100 , Retainer-Sea Part No.-5541529300 , Seal-V-Ring Part No.-5541529500 , Shield Part No.-5541529600 , Retainer Part No.-5541529700 , Unit-No Spin Part No.-5541530400 , Hinge-Weld-O Part No.-5541530700 , Resistor Part No.-5541532300 , Washer -Thrust Part No.-5541534900 , Cap Seal T Part No.-5541537400 , Cap Part No.-5541537700 , Cap Part No.-5541537800 , Gear Part No.-5541538200 , Cover Part No.-5541538300 , Shaft Part No.-5541538500 , Cross Part No.-5541539300 , Solenoid Valve Part No.-5541540400 , Pump/Motor Part No.-5541541300 , Spring Assy Part No.-5541544400 , Screw, Hex Head Part No.-5541550300 , Lock Nut Part No.-5541550900 , Lock Nut Part No.-5541551000 , Lock Nut Part No.-5541558100 , Shaft Assy Part No.-5541559600 , Mount Part No.-5541562700 , Plug Part No.-5541564900 , Gauge Part No.-5541565000 , Piston-Brake Part No.-5541565700 , Pin Assy Part No.-5541565900 , Bearing- Part No.-0509012113 , Clutch Drive Part No.-5541570300 , Cover Plate- Part No.-5541572900 , Cover Plate Part No.-5541573000 , Inserts-Sing Part No.-5541574100 , Inserts Part No.-5541574300 , Inserts-Sing Part No.-5541574500 , Shaft Assy Part No.-5541575500 , Pump-Grease Part No.-5541580400 , Screw, Hex Head Part No.-5541583800 , Washer Part No.-5541589300 , Kit-Rebuild Part No.-5541592600 , Kit-Rebuild Part No.-5541592700 , Cartridge Part No.-5541593600 , Inserts-Sing Part No.-5541597300 , Cover Plate Part No.-5541598100 , Inserts Part No.-5541598200 , Sleeve Part No.-5541600200 , Bleeder-Air Part No.-5541600500 , Ring-Retaini Part No.-5541602300 , Washer Part No.-5541607500 , Washer Part No.-5541608500 , Silencer Part No.-5541609300 , Silencer-7Dm Part No.-5541609400 , Silencer Part No.-5541609800 , Mount Part No.-5541611600 , Contact Housing Part No.-5541611800 , Bolt Part No.-5541614100 , Pressure Switch Part No.-5541615200 , Pressure Switch Part No.-5541615300 , Board-Circui Part No.-5541640800 , Manifold Part No.-5541648700 , Valve-Needle Part No.-5541648800 , Valve-Check Part No.-5541648900 , Valve-Ball Part No.-5541652100 , Mount W/Reta Part No.-5541652700 , Valve/Manifo Part No.-5541654700 , Pin Part No.-5541659500 , Switch - Part No.-3176005923 , Bearing Part No.-5541661700 , Coil Part No.-5541663000 , Bearing Part No.-5541663500 , Contact Housing Part No.-5541663700 , Mount-2 Piec Part No.-5541664500 , Mount-2Pc Part No.-5541665700 , Mount- Part No.-5541665900 , Connector Part No.-5541668100 , Not Del. Sep. Part No.-5541672800 , Center Body- Part No.-5541677400 , Seal Kit Part No.-5541678300 , Valve Part No.-5541678400 , Motor-Elec Part No.-5541679200 , Cup-Bearing Part No.-5541705500 , Retainer Part No.-5541705800 , Flange Part No.-5541706000 , Gear/Pinion Part No.-5541706600 , Seal-Pin Part No.-5541707100 , Seal-Pin Part No.-5541707200 , Gear Set Part No.-5541710700 , Carrier Part No.-5541711900 , Seal Kit Part No.-5541713200 , Striker Bolt Part No.-5541721300 , Regulator Part No.-5541728200 , Seal-Pin Part No.-5541729100 , Bearing Assy Part No.-5541733100 , Kit-Bearing Part No.-5541733300 , Plate Part No.-5541733800 , Switch Part No.-6060007257 , Kit-Seal Part No.-5541737500 , Sleeve Assy Part No.-5541738600 , Valve Part No.-5541738700 , Bearing Assy Part No.-5541739500 , Pump Part No.-5541743200 , Spacer Kit Part No.-5541745400 , Cup Part No.-5541745600 , Piston/Seal Part No.-5541750200 , Column-Steer Part No.-5541752000 , Control-Hyd Part No.-5541753100 , Diff Case Part No.-5541753600 , Pump-Lube Part No.-5541754300 , Cooler-Hydra Part No.-5541757600 , Seal Kit Part No.-5541758200 , Seal Kit Part No.-5541758400 , Washer Part No.-5541759700 , Bolt,Stud Part No.-6060004880 , Cover Part No.-5541761400 , Carrier Part No.-5541762900 , Pump Part No.-5541763600 , Valve Part No.-5541763900 , Bearing Part No.-5541764400 , Cone Part No.-5541765500 , Plate Part No.-5541765600 , Pin-Hitch Part No.-5541765700 , Pin-Hitch Part No.-5541765800 , Seal Kit Part No.-5541766200 , Cap-Radiator Part No.-5541767300 , Sleeve Part No.-5541767400 , Spacer/Shim Part No.-5541771100 , Hub-Wheel Part No.-5541773100 , Sensor Part No.-5541823100 , Kit Part No.-5541830900 , Plug Part No.-5541836700 , Bearing Part No.-5112300379 , Washer Part No.-5541839900 , Stud Part No.-5541840000 , Flange Nut Part No.-5541845100 , Ring Part No.-5541857300 , Polyswitch Part No.-5541858600 , Receptacle Part No.-5541858900 , Bearing-Ball Part No.-5541865800 , Speedo-Prog Part No.-5541868100 , Led Light Part No.-5541868200 , Pressure Swi Part No.-5541868800 , Seal Ring Part No.-5541869500 , Cable #16-3 15 Male/Female Part No.-5541879600 , Plc Expansio Part No.-5541880800 , Plc Expansio Part No.-5541880900 , Plug Part No.-5541883400 , O-Ring Part No.-5541883700 , Plate-Space Part No.-5541885600 , Shift Lever Part No.-5541889800 , Gasket Part No.-5541893100 , Seal Kit Part No.-5541902000 , Blower Part No.-5541902100 , Kit-Seal Part No.-5541902400 , Kit-Rod Seal Part No.-5541902500 , Spring Part No.-5541903900 , Contact Housing Part No.-5541905000 , Wedge Lock Part No.-5541905100 , Housing Part No.-5541906500 , Valve Assy Part No.-5541906600 , Backshell 90 Part No.-5541909500 , Plug Part No.-5541911700 , Plug Part No.-5541911900 , Contact Housing Part No.-5541912900 , Contact Housing Part No.-5541913100 , Contact Housing Part No.-5541913500 , Contact Housing Part No.-5541913600 , Tube-Rad Part No.-5541915100 , Seal Kit Part No.-5541915300 , Nut Part No.-5541915800 , Seal Kit Part No.-5541917800 , Cable Lug Part No.-5541920900 , Drive Arm Part No.-5541921200 , Socket Part No.-5541921400 , Extraction T Part No.-5541921600 , Cable Lug Part No.-5541922500 , Contact Housing Part No.-5541923100 , Grommet Part No.-5541924100 , Cable Part No.-5541924200 , Front Cover Part No.-5541924400 , Washer Flat Part No.-5541924700 , Ring-Snap Part No.-5541925200 , Wear Sleeve Part No.-5541925600 , Pump Part No.-5541927400 , Gauge Part No.-5541928500 , Gear Part No.-5541935900 , Ring-Retaini Part No.-5541936400 , Yoke-End Part No.-5541936600 , Flange Screw Part No.-5541936900 , Seal-Oring Part No.-5541937700 , Hub To Seal Part No.-5541938100 , Cone-Bearing Part No.-5541938200 , Cup-Bearing Part No.-5541938300 , Cup-Bearing Part No.-5541938500 , Cone-Bearing Part No.-5541938600 , Ring-Snap Part No.-5541939100 , Sensor-Speed Part No.-5541945400 , Cap Part No.-5541949700 , Wagner Part Part No.-5541950800 , Gauge-Fuel Part No.-5541950900 , Bearing Part No.-5541954200 , Hitch Pin Part No.-5541955100 , O-Ring Part No.-5541956300 , Clutch Assy. Part No.-5541957000 , Spring Part No.-5541957400 , Spring Part No.-5541957500 , Retaining Ring Part No.-5541957600 , Gear Part No.-5541957700 , Brg Retainin Part No.-5541957900 , Cup Part No.-5541958000 , O-Ring Part No.-5541958300 , Low Speed Sh Part No.-5541958500 , Bearing Cap Part No.-5541958700 , Bearing Cap Part No.-5541958800 , Bearing Cap Part No.-5541958900 , Bearing Cap Part No.-5541959000 , Rear Bearing Part No.-5541959100 , O-Ring Part No.-5541959300 , O-Ring Part No.-5541959400 , Shaft-Axle Part No.-5541960400 , Hub/Cup Assy Part No.-5541960600 , Wear Sleeve Part No.-5541960800 , Receptacle Part No.-5541961800 , Sender Fuel Part No.-5541962300 , Harness 3 Wi Part No.-5541962400 , Couple Part No.-5541962700 , Pillow Block Part No.-5541963000 , Hub-Gear Part No.-5541963900 , Stud Part No.-5541964000 , Nut Lock Part No.-5541964100 , Snap Ring Part No.-5541964200 , Valve-Ball 3 Part No.-5541967200 , Gear Part No.-5541972900 , Trunion Part No.-5541973500 , Spacer Part No.-5541973700 , Hand Pump Part No.-5541974300 , Head Assembly Part No.-5541974900 , Washer Part No.-5541984700 , Spacer Part No.-5541985200 , Seal Part No.-5541985300 , Sealing Kit Part No.-5541986200 , Seal-Inner Part No.-5541987000 , Seal-Outer Part No.-5541987100 , Gear & Brg Part No.-5541987500 , Spring Part No.-5541993300 , Piston Ring Part No.-5541998000 , Motor-Wiper Part No.-5542001600 , Brake Valve Part No.-5542003200 , Plate-Clutch Part No.-5542004300 , Kit-Overhaul Part No.-5542007100 , Kit-Bearing Part No.-5542007200 , Kit-Seal Part No.-5542007300 , Gasket/Seal Part No.-5542007900 , Snap Ring Part No.-5542008100 , Seal Part No.-5542008500 , Ring Part No.-5542008600 , Disc Part No.-5542008700 , Seal Part No.-5542008900 , Seal Assy Part No.-5542009000 , Piston-Brake Part No.-5542009100 , Seal-Sq Cut Part No.-5542009300 , Cover Part No.-5542009500 , Piston-Clutc Part No.-5542010900 , Backup Plate Part No.-5542011000 , Spring Part No.-5542011100 , Snap Ring Part No.-5542011400 , Module Part No.-5542011900 , Lockring Part No.-5542012500 , Spacer Part No.-5542015600 , Cap/Sleeve A Part No.-5542015700 , Flange Part No.-5542016900 , Gear Part No.-5542017100 , Bearing Part No.-5541958100 , Retainer Part No.-5542018400 , Diff Kit Part No.-5542022400 , Bearing-Pill Part No.-5542022500 , Sun Gear Part No.-5542024600 , Cup-Diff Brg Part No.-5542025000 , Cone-Bearing Part No.-5542025100 , Bearing Part No.-5542025200 , Cone-Bearing Part No.-5542025300 , Cup-Bearing Part No.-5542025400 , Brg Cage/Cup Part No.-5542025500 , Snap Ring Part No.-5542025800 , Valve-Main C Part No.-5542028100 , Lever Part No.-5542032000 , Section-Valv Part No.-5542033100 , Screw, Hex Head Part No.-5542035100 , Switch-Binar Part No.-5542036700 , Knurled Knob Part No.-5542037700 , Cooler - Tra Part No.-5542064800 , Speed Indicator Part No.-5542065500 , Bearing Part No.-5542066200 , Washer Hose Part No.-5542070000 , Contact Housing Part No.-5542079400 , Contact Housing Part No.-5542079500 , Column Steer Part No.-5542082100 , Valve-Brake Part No.-5542085500 , Turbo Part No.-5542087100 , Switch Part No.-5542089400 , Switch Part No.-5542089500 , Contactblock Part No.-5542089600 , Check Vlv Assy Part No.-5542089800 , Screw Part No.-5542093000 , Valve Part No.-5542093100 , Tube Part No.-5542099700 , Tube Part No.-5542099800 , Wiper Motor Part No.-5542107300 , Mount Part No.-5542110700 , Sequence Val Part No.-5542111200 , Fan Cover Part No.-5542113000 , Sensor Speed Part No.-5542113800 , Check Valve Part No.-5542118800 , Radiator Part No.-5542121100 , Rod Part No.-5550285100 , Lockcollar Part No.-5551122500 , Tube-Mountin Part No.-5551131800 , Collar Part No.-5551369700 , Mount Part No.-5551766700 , Rod Part No.-5552448100 , Kit-Gauge As Part No.-5552491700 , Lockcollar Part No.-5552574700 , Cap Part No.-5553234300 , Rod Part No.-5553279200 , Bracket Part No.-5553305300 , Washer Part No.-5553526000 , Spacer Part No.-5553616000 , Mounting Pla Part No.-5553658300 , Nut Part No.-5553676200 , Guard Part No.-5553825200 , Spacer Part No.-5554090100 , Gasket Part No.-5554245900 , Lock Device Part No.-5554534800 , Washer Part No.-5554620400 , Gasket Part No.-5555133400 , Spacer Part No.-5555213400 , Chain Part No.-5555258100 , Castle Nut Part No.-5555279800 , Washer Part No.-5555600700 , Fitting Part No.-5555710600 , Hinge Part No.-5555765400 , Washer Part No.-5556038500 , Plate Part No.-5556270400 , Bushing Part No.-5556287300 , Cap Part No.-5556287400 , Washer Part No.-5556287500 , Pin-Steering Part No.-5556294600 , Pin Part No.-5556295000 , Lever Part No.-5556296500 , Link Part No.-5556296900 , Link Part No.-5556297000 , Lever Part No.-5556539000 , Shift Ctrl Part No.-5556539400 , Bellcrank Part No.-5556539500 , Rod Part No.-5556539600 , Housing Part No.-5556542200 , Linkage Part No.-5556554300 , Link Part No.-5556559200 , Cap Part No.-5556722400 , Cover-Hinge Part No.-5556883100 , Lock Plate-H Part No.-5556901800 , Washer Part No.-5556901900 , Tube Part No.-5556964300 , Cover Part No.-5556969900 , Wear Ring Part No.-5557237100 , Collar Part No.-5557817100 , Pin Part No.-5557818600 , Tube Part No.-5557853600 , Bushing Part No.-5557853700 , Shim Part No.-5557892500 , Bearing Part No.-5557915600 , Mount Part No.-5558095500 , Bracket Part No.-5558140300 , Bar Part No.-5558232300 , Cover Part No.-5558305100 , Rod Part No.-5558422600 , Spacer Part No.-5558454800 , Spacer Part No.-5558578600 , Clamping Plate Part No.-5558638100 , Driveline Part No.-5558699300 , Driveline Part No.-5558699600 , Insert Part No.-5558714600 , Insert Part No.-5558714700 , Washer Part No.-5558721600 , Spacer Part No.-5558723700 , Driveline Part No.-5558764300 , Brace Part No.-5558818500 , Shrink Sleev Part No.-5558841900 , Mount Part No.-5558896200 , Mount Part No.-5558896300 , Fuse Holder Part No.-5558984300 , Retainer Pin Part No.-5559060900 , Guard Part No.-5559207400 , Guard Part No.-5559214800 , Guard Part No.-5559214900 , Guard Part No.-5559215000 , Fuse Holder Part No.-5559225600 , Block-Fuse Part No.-5559225700 , Bracket Part No.-5559321500 , Mount Part No.-5559352600 , Mount Part No.-5559368400 , Support Part No.-5559513200 , Driveline Part No.-5559640900 , Hose Holder Part No.-5559641800 , Tube Assy Part No.-5559755100 , Tube Part No.-5559755200 , Tube Part No.-5559755300 , Dump Control Part No.-5559758600 , Pivot Assy Part No.-5559758700 , Gasket Part No.-5559858600 , Ring, Wear Part No.-5559904700 , Mount Part No.-5559905400 , Flatwasher Part No.-5559923000 , Flatwasher Part No.-5559923100 , Washer Part No.-5559923300 , Flatwasher Part No.-5559923400 , Flatwasher Part No.-5559923600 , Washer Part No.-5559923800 , Flatwasher Part No.-5559923900 , Washer Part No.-5559924000 , Washer Part No.-5559924100 , Driveline Part No.-5559998700 , Pin Part No.-5560189100 , Tighten-Belt Part No.-5560393800 , Bushing Part No.-5560411900 , Driveline Part No.-5560428800 , Tube-Flex Ss Part No.-5560524100 , Mount Part No.-5560564600 , Control-Engi Part No.-5560579600 , Driveline Part No.-5560646200 , Pulley Part No.-5728202348 , Driveline Part No.-5560952900 , Cover Part No.-5560987400 , Nut Part No.-5561079900 , Washer Part No.-5561152300 , Wearing Ring Part No.-5561152400 , Tie Plate Part No.-5561234400 , Handle Part No.-5561325700 , Bellcrank Part No.-5561326900 , Gauge Assy Part No.-5561373601 , Gauge Part No.-5561373701 , Voltmeter Part No.-5561374301 , Gauge Part No.-5561374501 , Flange Part No.-5561411000 , Gasket Part No.-5561471400 , Bearing Part No.-5561477200 , Roller Part No.-5561477700 , Roller Part No.-5561477800 , Rod Part No.-5561547700 , Hose Part No.-5561632800 , Link Part No.-5561644600 , Weldment Part No.-5561681500 , Tie Point Part No.-5561695501 , Tube Part No.-5561712800 , Dipstick Part No.-5561713700 , Float Part No.-5561761100 , Level Sensor Part No.-5561806000 , Kit-Pump Part No.-5561847200 , Tube Part No.-5561854600 , Mount Part No.-5561881900 , Tube Part No.-5561895200 , Kit-Pump Part No.-5561991100 , Bushing Part No.-5562022100 , Tube-Flex Part No.-5562085300 , Sprocket-Mod Part No.-5562124900 , Pin Part No.-5562142100 , Roller Part No.-5562170600 , Drive Part No.-5562253400 , Reverser Mod Part No.-5562254000 , Driveline Part No.-5562269100 , Tube Part No.-5562309200 , Dipstick Part No.-5562466200 , Spacer Part No.-5562485400 , Sleeve Part No.-5562512200 , Mount Part No.-5562518200 , Tube Part No.-5562557300 , Dip Stick Part No.-5562557500 , Bus Bar Part No.-5562627900 , Bushing Part No.-5562712600 , Cable Part No.-5562733300 , Suction Pipe Part No.-5562769600 , Spacer Part No.-5563029700 , Spacer Part No.-5563040300 , Spacer Part No.-5563040400 , Spacer Part No.-5563040500 , Hose Mod Part No.-5563201500 , Weldment Part No.-5563512200 , Rod Part No.-5563558000 , Plate Part No.-5563644900 , Insulator Part No.-5563723300 , Wheel Flange Part No.-5563834800 , Support Part No.-5563874700 , Support Part No.-5563874800 , Rod Part No.-5563875000 , Cushion Part No.-5563922800 , Arm Part No.-5563957700 , Bracket Part No.-5563973600 , Link Part No.-5563974000 , Mount Part No.-5564012000 , Pin Part No.-5564051600 , Exhaust Deflect Part No.-5564128200 , Insert Part No.-5564213400 , Lever Part No.-5564261200 , Brake Part No.-5564375100 , J Block Part No.-5564441800 , Spacer Part No.-5564519600 , Cross Beam Part No.-5564533300 , Washer Part No.-5564538800 , Support Part No.-5564592600 , Lever Part No.-5564592900 , Rod Part No.-5564594500 , Seat Part No.-5564613200 , Sprocket Mod Part No.-5564622200 , Washer Part No.-5564662400 , Bushing Part No.-5564679200 , Manifold Part No.-5564702800 , Driveline Part No.-5564763400 , Spacer Part No.-5564803800 , Tube Part No.-5564814200 , Mount Wldmt Part No.-5564831000 , Pin-Cylinder Part No.-5564832700 , Mount-Cyl Part No.-5564832800 , Tube Part No.-5564993800 , Tube Part No.-5564993900 , Pin Part No.-5565047900 , Dipstick Mod Part No.-5565066900 , Mount Part No.-5565078000 , Hinge Pin Part No.-5565107300 , Accumulator Part No.-5565170200 , Guard Part No.-5565224100 , Junction Block Part No.-5565284800 , Wear Ring Part No.-5565365200 , J-Block Part No.-5565420100 , Block Part No.-5565452000 , Lamp Attachment Part No.-5565597300 , Purifier Part No.-5565615000 , Mount. Bracket Part No.-5565672000 , Valve Mod Part No.-5565680600 , Tube Assy-D/ Part No.-5565690100 , Guard Part No.-5565717100 , Kit-Gasket Part No.-5565734400 , Sleeve Part No.-5565768700 , Insert Part No.-5565787400 , Guard Part No.-5565807300 , Driveline Part No.-5565818700 , Junction Block Part No.-5565825700 , Bushing Part No.-5570003600 , Pin Weldment Part No.-5570075000 , Stab Pin Part No.-5570323700 , Spacer Part No.-5570331700 , Fitting Part No.-5570526300 , Pin Part No.-5570683900 , Block-Juncti Part No.-5570747000 , Lock-Up Valv Part No.-5570824600 , Insert Part No.-5570824800 , Driveline Part No.-5570825500 , Cover Part No.-5570827400 , Air Inlet Part No.-5570838500 , Door Part No.-5570854000 , Manifold Blo Part No.-5570871800 , Wheel Part No.-5570993300 , Spacer-Hoist Part No.-5571011400 , Tube Part No.-5571025800 , Shim Part No.-5571060300 , Hose-Rad Part No.-5571079000 , Hinge Part No.-5571085400 , Insert Part No.-5571085500 , Brg Retainer Part No.-5571085600 , Spacer Part No.-5571085700 , Spacer Part No.-5571085800 , Retainer Part No.-5571085900 , Adapter Part No.-5571128700 , Tube Part No.-5571130800 , Pin Part No.-5571131300 , Hinge Part No.-5571163200 , Hinge Part No.-5571163300 , Roller Assy Part No.-5571176800 , Stud Part No.-5571221100 , Mount Part No.-5571225700 , Mount Part No.-5571245000 , Inst-Swivel Part No.-5571333800 , Swivel Inst- Part No.-5571338000 , Rim Assy Part No.-5571347000 , Insert Part No.-5571352500 , Retainer Part No.-5571352600 , Retainer-Pin Part No.-5571352800 , Pin Part No.-5571352900 , Retainer-Pin Part No.-5571353000 , Shim Part No.-5571353100 , Shim Part No.-5571353200 , Shim Part No.-5571353300 , Shim Part No.-5571353400 , Insert-Hinge Part No.-5571395000 , Retainer Part No.-5571395100 , Insert-Lower Part No.-5571395200 , Insert Part No.-5571395300 , Insert-Bogie Part No.-5571395400 , Pin Part No.-5571395500 , Pin Retainer Part No.-5571395600 , Shim Part No.-5571397300 , Washer Part No.-5571399000 , Shim Part No.-5571406100 , Shim Part No.-5571406200 , Shim Part No.-5571406300 , Shim Part No.-5571406400 , Shim Part No.-5571450000 , Bushing Part No.-5571461900 , Inst-Swivel Part No.-5571489100 , Pressure Swi Part No.-5571492100 , Retainer Part No.-5571494800 , Retainer Part No.-5571494900 , Insert Part No.-5571499000 , Washer Part No.-5571504300 , Mod. Kit Part No.-5571512000 , Hose-Radiato Part No.-5571524600 , Driveline Part No.-5571591400 , Mount Part No.-5571623400 , Rubbermoulding Part No.-5571666800 , Rubbermoulding Part No.-5571666900 , Rubbermoulding Part No.-5571667000 , Rubbermoulding Part No.-5571667100 , Washer Part No.-5571668400 , Wear Ring Part No.-5571676900 , Spacer Part No.-5571677300 , Mount Part No.-5571710400 , Spacer Part No.-5571725400 , Tube Part No.-5571741500 , Tube Part No.-5571741600 , Tube Part No.-5571844000 , Manifold Part No.-5571852800 , Spacer/Shim Part No.-5571854700 , Gasket Part No.-5571855200 , Washer Part No.-5571859100 , Rod Part No.-5571863000 , Tube Part No.-5571873900 , Swivel Part No.-5571877400 , Converter Part No.-5571877800 , Hydr.Transmiss. Part No.-5571882700 , Cap Part No.-5571887600 , Shim Part No.-5571887700 , Plate Part No.-5571888900 , Lock Part No.-5571890200 , Mount Part No.-5571891100 , Mount Part No.-5571891200 , Junction Block Part No.-5571900700 , Manifold Part No.-5571900800 , Driveline Part No.-5571900900 , Driveline Part No.-5571901000 , Driveline Part No.-5571901200 , Mount Part No.-5571902700 , Tube Part No.-5571903600 , Tube Part No.-5571903800 , Tube Part No.-5571903900 , Mount Part No.-5571904200 , Mount Part No.-5571904300 , Wheel Assy Part No.-5571909100 , Fender Plate Part No.-5571910700 , Retainer Part No.-5571910800 , Fender Plate Part No.-5571910900 , Retainer Part No.-5571911000 , Retainer Part No.-5571911100 , Retainer Part No.-5571911200 , Gusset Part No.-5571911300 , Mount Part No.-5571913300 , Bracket Part No.-5571914700 , Dipstick Part No.-5571918700 , Tube Part No.-5571922300 , Tube Part No.-5571922400 , Tube Part No.-5571929600 , Tube Part No.-5571929700 , Tube Part No.-5571929800 , Cooler Part No.-5571933800 , Rim Compl. Part No.-5571934300 , Tube Part No.-5571934500 , Tube Part No.-5571934600 , Tube Part No.-5571934700 , Tube Part No.-5571934800 , Tube Part No.-5571936400 , Tube Part No.-5571936500 , Tube Part No.-5571936600 , Tube Part No.-5571936700 , Tube Part No.-5571939900 , Tube Part No.-5571940000 , Tube Part No.-5571940200 , Tube Part No.-5571940700 , Tube Part No.-5571940800 , Tube Part No.-5571940900 , Mount Part No.-5571942000 , Tube Part No.-5571942500 , Spacer Part No.-5571946000 , Spacer Part No.-5571946500 , Tube Part No.-5571954000 , Tube Part No.-5571954100 , Tube Part No.-5571954200 , Tube Part No.-5571954300 , Solenoid Valve Part No.-5571956100 , Mount Part No.-5571958700 , Tube Part No.-5571958800 , Tube Part No.-5571962300 , Tube Part No.-5571962600 , Tube Part No.-5571962700 , Tube Part No.-5571966200 , Shim - .010 Part No.-5571988300 , Shim - .020 Part No.-5571988400 , Shim - .040 Part No.-5571988500 , Solenoid Valve Part No.-5571997600 , Control Rod End Part No.-5571998600 , Hose-Intake Part No.-5572000700 , Cavity Plug Part No.-5572002900 , Sealing List Part No.-5572012500 , Lockcollar Part No.-5572039700 , Lockcollar-4 Part No.-5572040200 , Bulkhead Conn. Part No.-5572042400 , Cover, Wiggi Part No.-5572063600 , Flange Part No.-5572067500 , Gasket Part No.-5572071300 , Driveline Part No.-5572075500 , Driveline Part No.-5572075600 , Guard Part No.-5572081600 , Cylinder Part No.-5572116000 , Mount Part No.-5572150600 , Shim Part No.-5572163900 , Fender Ext Part No.-5572211800 , Fender Ext Part No.-5572211900 , Fender Exten Part No.-5572212000 , Fender Ext Part No.-5572212100 , Purifier Part No.-5572223100 , Bushing Part No.-5572278000 , Insert Part No.-5572278100 , Loop Part No.-5572304400 , Protect. Plate Part No.-5572304700 , Protect. Plate Part No.-5572304800 , Guide Part No.-5572308500 , Control Part No.-5572313700 , Guard Part No.-5572314000 , Lock-Bar Part No.-5572332700 , Gauge-Press Part No.-5572400000 , Voltmeter Part No.-5572400200 , Gauge-Press Part No.-5572400500 , Gauge-Press Part No.-5572400800 , Wiring Part No.-5572400900 , Pin-Hinge Part No.-5572419400 , Retainer-Brg Part No.-5572419500 , Spacer-Inner Part No.-5572419600 , Spacer-Inner Part No.-5572419700 , Retainer Part No.-5572419800 , Rod Part No.-5572473400 , Spacer Part No.-5572474700 , Mount Part No.-5572528000 , Shaft-Axle Part No.-5572537300 , Mount Part No.-5572538500 , Mount Part No.-5572538700 , Seat Belt Part No.-5572551100 , Rail Part No.-5572561600 , Divider Bloc Part No.-5572564500 , Kit-Engine S Part No.-5572586400 , Rod Part No.-5572600600 , Inst-Control Part No.-5572619800 , Switch-Speed Part No.-5572641100 , Control Box Part No.-5572646900 , Cable Part No.-5572647400 , Cable Part No.-5572647500 , Installation Part No.-5572647900 , Spacer Part No.-5572655300 , Retainer Part No.-5572655500 , Hose-Rad Part No.-5572666300 , Shim Part No.-5572668100 , Stop-Axle Part No.-5572681300 , Tube Part No.-5572682900 , Cap Part No.-5572683000 , Shim Part No.-5572683100 , Tank-Surge Part No.-5572685200 , Tube-Dump/St Part No.-5572688400 , Tube-Brake S Part No.-5572689400 , Tube-Brake R Part No.-5572689500 , Tube Part No.-5572689900 , Tube Part No.-5572690300 , Tube-Dump Part No.-5572690400 , Tube-Steer Part No.-5572692100 , Tube-Steer Part No.-5572692200 , Tube Part No.-5572692900 , Tube Part No.-5572693000 , Tube-Brake C Part No.-5572693200 , Tube-Brake C Part No.-5572693400 , Tube-Brake C Part No.-5572693500 , Shim Part No.-5572717900 , Cover-Weld Part No.-5572742200 , Block Assy-F Part No.-5572814400 , Hose-Rad Part No.-5572824200 , Mount-Cyl Part No.-5572832900 , Rod Part No.-5572842500 , Tube Part No.-5572864300 , Dipstick Part No.-5572864600 , Driveline Part No.-5572903100 , Mount Part No.-5572920300 , Insert Part No.-5572935200 , Insert Part No.-5572935300 , Guard Part No.-5572954200 , Tube Assy Part No.-5572956100 , Tube Assy Part No.-5572956200 , Tube Assy Part No.-5572956300 , Tube Assy Part No.-5572956400 , Tube Assy Part No.-5572956500 , Gasket Part No.-5572971700 , Ramp Part No.-5572981600 , Mount Part No.-5573041300 , Shim Part No.-5573049600 , Mount Part No.-5573058400 , Block Part No.-5573068700 , Divider Bloc Part No.-5573071200 , Divider Bloc Part No.-5573071300 , Insulation Part No.-5573072300 , Pedal Part No.-5573078100 , Mount-Pedal Part No.-5573078500 , Mount Part No.-5573090800 , Mount Part No.-5573090900 , Tube Assy Part No.-5573093200 , Driveline Part No.-5573096100 , Driveline Part No.-5573096200 , Flap-Rubber Part No.-5573097200 , Cable Part No.-5573097500 , Pressure Switch Part No.-5573097700 , Stud Part No.-5573107400 , Tube Bend Part No.-5573114500 , Driveline Part No.-5573141100 , Tube Part No.-5573177200 , Block-Div Part No.-5573178400 , Hydraulic Block Part No.-5573178500 , Block-Port Part No.-5573202800 , Proximity Sw Part No.-5573207500 , Switch - Part No.-5573219800 , Tie Plate Part No.-5573223300 , Sleeve Part No.-5573226500 , Spacer Part No.-5573226600 , Tube Part No.-5573229200 , Plate Part No.-5573234500 , Guard Part No.-5573240700 , Pin-Tailgate Part No.-5573245000 , Switch Part No.-5573246800 , Press Switch Part No.-5573246900 , Guard Part No.-5573289300 , Lamp Part No.-5573297500 , Seat Back Part No.-5573331200 , Mount Part No.-5573338100 , Shift Contro Part No.-5573342500 , Dipstick Part No.-5573348900 , Visual Alarm Part No.-5573354500 , Harness Part No.-5573355000 , Harness- Part No.-5573355100 , Dipstick Part No.-5573359100 , Wheel Assy-2 Part No.-5573371500 , Hanger Wldmt Part No.-5573379000 , Spacer Part No.-5573380000 , Spacer Part No.-5573380200 , Dipstick Part No.-5573394000 , Tube-Wldmt Part No.-5573394200 , Spacer Part No.-5573414800 , Slide Part No.-5573425300 , Harness-Diag Part No.-5573454200 , Busbar Part No.-5573471300 , Washer Mod Part No.-5573471400 , Cable Part No.-5573476600 , Accel. Pedal Part No.-5573476700 , Harness Part No.-5573532000 , Harness-Tran Part No.-5573533400 , Harness Part No.-5573533500 , Harness-Tran Part No.-5573534400 , Bush-Dry Part No.-5573546500 , Transducer A Part No.-5573550700 , Battery Isol Part No.-5573556100 , Driveline Part No.-5573607500 , Drive Line Part No.-5573607600 , Driveline As Part No.-5573615200 , Driveline Part No.-5573615500 , Driveline As Part No.-5573615600 , Light-Overhd Part No.-5573625900 , Harness-Alt Part No.-5573631200 , Rod-Ctrl Part No.-5573631600 , Face Plate-I Part No.-5573656100 , Gasket-F Part No.-5573656200 , Plate-Face Part No.-5573656300 , Gasket- Part No.-5573656400 , Harness-Eng Part No.-5573657300 , Fender Ext-R Part No.-5573670400 , Drive Line Part No.-5573673200 , Driveline Part No.-5573673500 , Spacer-Brg Part No.-5573674300 , Shim Part No.-5573685400 , Inst-Shim Part No.-5573686500 , Mount Part No.-5573696700 , Wear Plate Part No.-5573712400 , Pin Assy Part No.-5573735000 , Inst-Pin Part No.-5573736600 , Junction Block Part No.-5573768400 , Shaft-Fan Part No.-5573770100 , Carrier-Brg Part No.-5573770200 , Spacer/Nut Part No.-5573775800 , Shim Part No.-5573776000 , Shim Part No.-5573776200 , Insert Part No.-5573794300 , Cable Part No.-5573795700 , Brake Part No.-5573823800 , Foot Brake Part No.-5573824100 , Spacer Part No.-5573824500 , Pin Part No.-5573824600 , Pin Part No.-5573824700 , Instrument Panel Part No.-5573828300 , Tube Weldmen Part No.-5573837000 , Block Part No.-5573978000 , Tube Part No.-5573988000 , Driveline Part No.-5574038200 , Boss Part No.-5574041300 , Cover Assy Part No.-5574044600 , Mount-Drivel Part No.-5574044800 , Boss Part No.-5574045600 , Driveline Part No.-5574055700 , Mount Part No.-5574077100 , Cap Part No.-5574096700 , Mount-Alt Part No.-5574107300 , Bracket Part No.-5574123900 , Pin-Chrome Part No.-5574160000 , Pin, 114.3X3 Part No.-5574172200 , Tube Part No.-5574185100 , Support Part No.-5574185300 , Intake Mount Part No.-5574185400 , Rod Part No.-5574236600 , Tube Part No.-5574241800 , Tube Part No.-5574241900 , Switch Mod-T Part No.-5574245000 , Valve Part No.-5574246000 , Plate-Lift Part No.-5574246400 , Valve-Aux Part No.-5574246900 , Hump Hose Part No.-5574256400 , Retainer Part No.-5574256700 , Cover Part No.-5574257100 , Pin-70Mm Dia Part No.-5574257900 , Spacer Part No.-5574258000 , Spacer Part No.-5574264100 , Mount Part No.-5574265100 , Adapter Part No.-5574287500 , Kit-Horn Part No.-5574287600 , Horn Part No.-5574287700 , Brake Pedal Part No.-5507398800 , Wheel Assy Part No.-5574310000 , Block Part No.-5574324500 , Block Part No.-5574324600 , Mount Part No.-5574325400 , Cylinder Part No.-5574326000 , Rod-Adjustng Part No.-5574335500 , Strobe Mod Part No.-5574338900 , Reverse Alarm Part No.-5574339000 , Mount Part No.-5574362700 , Wheel Assy Part No.-5574364500 , Harness-A/V Part No.-5574467600 , Tube Part No.-5574475400 , Tube Part No.-5574475500 , Tube Part No.-5574475600 , Tube Part No.-5574475700 , Tube Mount Part No.-5574475800 , Osc Axle Wel Part No.-5574476600 , Tube Wlmt Part No.-5574476800 , Exhaust Wrap Part No.-5574477800 , Tube Assy - Part No.-5574480000 , Harness Part No.-5574489000 , Dip Stick Part No.-5574510500 , Dip Stick Part No.-5574512800 , Protection Roof Part No.-5574522100 , Hinge Part No.-5574525900 , Hinge Part No.-5574526000 , Washer Part No.-5574535300 , Seat Part No.-5574535600 , Iso Switch Part No.-5574539100 , Kit-Dipstick Part No.-5574543600 , Cap Part No.-5574549700 , Cap Part No.-5574579400 , Valve Part No.-5574602700 , Guard Part No.-5574618100 , Guard Part No.-5574618500 , Rod Part No.-5574638600 , Spacer Part No.-5574652100 , Harness-Hyd Part No.-5574662200 , Tube Assy-Ho Part No.-5574668600 , Tube Assy-Ho Part No.-5574668700 , Stab Guard W Part No.-5574675300 , Spacer Part No.-5574676200 , Spacer Part No.-5574676300 , Swiwel Part No.-5574677400 , Driveline Part No.-5574677800 , Driveline Part No.-5574677900 , Driveline Part No.-5574678000 , Driveline Part No.-5574678100 , Driveline Part No.-5574678200 , Baffle-Rubbe Part No.-5574679400 , Dogbone Part No.-5574680600 , Tube-Rad Low Part No.-5574681700 , Pin-Hinge Part No.-5574682800 , Bearing Reta Part No.-5574682900 , Spacer Part No.-5574683000 , Tube/Shell C Part No.-5574683300 , Upbox Mod-Su Part No.-5574689400 , Tube Part No.-5574704800 , Plate Part No.-5574705500 , Hose-Rad Part No.-5574712900 , Clip Part No.-5574715200 , Tube-Suction Part No.-5574716100 , Tube Part No.-5574735300 , Tube Part No.-5574735400 , Tube Part No.-5574735500 , Step Part No.-5574745100 , Tube - Part No.-5574745600 , Mount Part No.-5574749000 , Driveline-9C Part No.-5574749900 , Step Part No.-5574750000 , Harness Part No.-5574761000 , Weldment Part No.-5574768900 , Weldment Part No.-5574769000 , Cover Part No.-5574775500 , Pad Part No.-5574788000 , Hose-Rad Part No.-5574791800 , Tube Assy-Di Part No.-5574802900 , Harness-Back Part No.-5574815700 , Driveline As Part No.-5574826800 , Tube Wldmt Part No.-5574841900 , Tube-Dipstic Part No.-5574842100 , Switch Assy Part No.-5574843700 , Breather Hos Part No.-5574847200 , Mount Part No.-5574847900 , Cap Part No.-5574859100 , D&H Valve As Part No.-5574869900 , Plate Part No.-5574874200 , Stud- Part No.-5574879600 , Tube Wldmt Part No.-5574883100 , Gasket-Instr Part No.-5574906200 , Harness Part No.-5574910600 , Harness Part No.-5574911600 , Harness-Ecm Part No.-5574911900 , Harness Part No.-5574912800 , Harness Part No.-5574913100 , Harness Part No.-5574913800 , Switch Box A Part No.-5574928300 , Dipstick Mod Part No.-5574935000 , Dipstick Part No.-5574935100 , Dipstick Part No.-5574935200 , Dipstick Part No.-5574935300 , Tube Wldmt Part No.-5574935400 , Valve-Div Part No.-5574941500 , Block Div Part No.-5574968400 , Dip Stick Part No.-5574975700 , Switch Box A Part No.-5574977800 , Pin-Bucket Part No.-5575000900 , Rest Pad Part No.-5575016200 , Restpad Cage Part No.-5575016300 , Plate Part No.-5575016400 , Fender Ext-R Part No.-5575026800 , Light Assy Part No.-5575031100 , Switch Part No.-5575045000 , Pin-Dogbone Part No.-5575045900 , Harness Part No.-5575050400 , Mount Part No.-5575052800 , Trans Trunni Part No.-5575063100 , Tube Assy Part No.-5575065200 , Rh Mirror Mo Part No.-5575068500 , Mount Part No.-5575070000 , Kit-Relay Part No.-5575089300 , Hinge Wdmt Part No.-5575094500 , Gauge Mod-Fu Part No.-5575096000 , Driveline Part No.-5575096600 , Spacer Part No.-5575099600 , Mount-Rad Bo Part No.-5575111700 , Converter Part No.-5575113973 , Converter Part No.-5575114800 , Pulley-Fan Part No.-5575130600 , Converter Part No.-5575153400 , Harness-#3 W Part No.-5575160200 , Plc Assy Part No.-5575162400 , Hood Weldmen Part No.-5575168100 , Pressurizer Part No.-5575175900 , Gasket Part No.-5575176000 , Gasket Part No.-5575176100 , Washer Plate Part No.-5575176500 , Plc Assy Part No.-5575185800 , Mount-Oil Co Part No.-5575189100 , Prop Bar-Hoo Part No.-5575194500 , Switch Mod Part No.-5575209400 , Strip Part No.-5575211500 , Strip-Bulb & Part No.-5575211600 , Tube Part No.-5575212000 , Tube Part No.-5575212200 , Tube Part No.-5575212300 , Strip-Bulb & Part No.-5575212600 , Component Bo Part No.-5575216000 , Harness-Alli Part No.-5575216100 , Harness Part No.-5575216200 , Harness Part No.-5575216500 , Switch Assy- Part No.-5575217900 , Tube-Dipstic Part No.-5575229600 , Block Part No.-5575230300 , Strip-Bulb & Part No.-5575230700 , Plate-Spacer Part No.-5575231600 , Guide Wldmt- Part No.-5575232300 , Harness Part No.-5575233400 , Harness-Rear Part No.-5575233500 , Harness Part No.-5575233600 , Harness Part No.-5575233900 , Harness Part No.-5575234000 , Harness Part No.-5575234100 , Fuse Block A Part No.-5575240100 , Pin Assy Part No.-5575249900 , Converter Part No.-5575265800 , Block Part No.-5575277400 , Block Part No.-5575277500 , Mount Part No.-5575277700 , Support Part No.-5575279400 , Plc System Part No.-5575281800 , Mod. Kit Part No.-5575282600 , Mount Part No.-5575285600 , Switch Part No.-5575286500 , Pin Assy-Swi Part No.-5575298600 , Tube Part No.-5575311400 , Tube Part No.-5575311500 , Swivel Inst Part No.-5575313200 , Harness Part No.-5575313800 , Harness-Alli Part No.-5575314300 , Mount-Booms Part No.-5575316500 , Wldmt-Boom S Part No.-5575317100 , Tube Assy Part No.-5575320700 , Tube Part No.-5575327300 , Spped Indica Part No.-5575327700 , Tube Part No.-5575328800 , Tube Part No.-5575328900 , Driveline Part No.-5575329600 , Fender Part No.-5575330300 , Fender Part No.-5575331100 , Tube Part No.-5575338200 , Swivel Lock Part No.-5575339700 , Mount Part No.-5575345200 , Tube Wldmt E Part No.-5575345500 , Tube Assy - Part No.-5575345600 , Mount-Fill P Part No.-5575346800 , Tube-Spacer Part No.-5575360700 , Valve-Auxili Part No.-5575369000 , Mount Plate Part No.-5575391600 , Drive Line Part No.-5575391700 , Driveline Part No.-5575391800 , Drive Line Part No.-5575391900 , Couple Part No.-5575398300 , Rrc System Part No.-5575398400 , Wiper Part No.-5575401000 , Elbow-Rubber Part No.-5575409100 , Harness Part No.-5575410300 , Harness Part No.-5575411200 , Harness Part No.-5575411300 , Mount Part No.-5575413400 , Rubbermouldi Part No.-5575415800 , Suction Pipe Part No.-5575415900 , Cover Plate Part No.-5575420200 , Support Part No.-5575421100 , Steel Fender Part No.-5575422900 , Mount Bar Part No.-5575462100 , Tube-1.25 In Part No.-5575471900 , Tube-1.25 In Part No.-5575472000 , Switch Box Part No.-5575473200 , Harness Part No.-5575476900 , Harness Door Part No.-5575477300 , Kit-Gauge Part No.-5575477400 , Gasket Part No.-5575479300 , Mount-Bulb & Part No.-5575482500 , Mounting Pla Part No.-5575488100 , Plc Part No.-5575492100 , Harness A7 Part No.-5575502300 , Baffle Plate Part No.-5575506100 , Column Steer Part No.-5575506900 , Valve Part No.-5575511100 , Control-Gear Part No.-5575522200 , Pressure Swi Part No.-5575524400 , Cover Set Part No.-5575525300 , Plc System Part No.-5575528100 , Harness Part No.-5575528800 , Strap Part No.-5575548400 , Grill Part No.-5575549000 , Plate Part No.-5575549100 , Grill Part No.-5575549500 , Hood Part No.-5575549605 , Hood Part No.-5575549661 , Protection Hood Part No.-5575549700 , Protection Hood Part No.-5575549900 , Radiator Unit Part No.-5575551500 , Wiper Part No.-5575551800 , Wiper Part No.-5575551900 , Accumulat.Block Part No.-5575564300 , Accumulat.Block Part No.-5575564400 , Dipstick Part No.-5575564500 , Gasket Part No.-5575577400 , Exhaust Prot Part No.-5575581700 , Gasket Part No.-5575583100 , Mount Part No.-5575585000 , Converter 24 Part No.-5575590900 , Tube Part No.-5575592400 , Tube Part No.-5575592600 , Wear Bar Part No.-5575597100 , Wear Bar Part No.-5575597500 , Mount Part No.-5575599400 , Dipstick Part No.-5575614300 , Tube-Cac Part No.-5575620300 , Guard Part No.-5575627300 , Mount Part No.-5575629200 , Rubbermouldi Part No.-5575631900 , Vaxelstr.Gen Part No.-5575632000 , Driveline Gu Part No.-5575635800 , Cooler-Fuel Part No.-5575639000 , Tube-Cac Part No.-5575639500 , Junction Block Part No.-5575640000 , Purifier Part No.-5575700040 , Harness Part No.-5575700053 , Manipulator Part No.-5575700121 , Plc System Part No.-5575700122 , Light Set Part No.-5575700259 , Wheel Compl. Part No.-5575700270 , Insert Part No.-5575700275 , Fender Part No.-5575700314 , Harness Part No.-5575700327 , Yoke Part No.-5575700369 , Spacer Part No.-5575700373 , Kit Hourmet Part No.-5575700376 , Driveline Part No.-5575700377 , Driveline Part No.-5575700378 , Attachment Part No.-5575700381 , Tube Part No.-5575700386 , Attachment Part No.-5575700398 , Mount Part No.-5575700408 , Washer Part No.-5575700409 , Tube Part No.-5575700490 , Holder Part No.-5575700575 , Dip Stick Part No.-5575700577 , Contact Bloc Part No.-5575700579 , Switch Part No.-5575700580 , Harness Part No.-5575700611 , Harness Part No.-5575700612 , Valve Part No.-5575700645 , Spacer Part No.-5575700657 , Speed Switch Part No.-5575700701 , Stud Part No.-5575700719 , Mount Part No.-5575700732 , Fender Part No.-5575700861 , Guard Part No.-5575700864 , Dipstick Tub Part No.-5575700873 , Dipstick Part No.-5575700874 , Spacer Part No.-5575700902 , Insert Part No.-5575700910 , Insert Part No.-5575700922 , Strip-Bulb & Part No.-5575700946 , Press Sensor Part No.-5575700947 , Press.Sens Kit Part No.-5575700948 , Harness-Gaug Part No.-5575700986 , Gear Ring Part No.-5575700998 , Kit Part No.-5575701044 , Fender Assy- Part No.-5575701073 , Harness Part No.-5575701096 , Harness Part No.-5575701099 , Insulation E Part No.-5575701173 , Drain Hose Part No.-5575701276 , Valve Part No.-5575701302 , Valve Part No.-5575701311 , Frame Part No.-5575701316 , Front Harnes Part No.-5575701325 , Jordkabel Part No.-5575701338 , Solenoid Val Part No.-5575701420 , Silencer Cov Part No.-5575701450 , Exhaust Cove Part No.-5575701452 , Exhaust Cove Part No.-5575701493 , Insert-Beari Part No.-5575701753 , Pipe Part No.-5575701830 , Valve Part No.-5575701840 , Wearing Ring Part No.-5575701847 , Link-Stabilizer Part No.-5575701916 , Pipe Part No.-5575701991 , Pipe Part No.-5575702002 , Mount Part No.-5575702052 , Hydr.Hose Part No.-5580000025 , Cable Part No.-5580000038 , Cable Part No.-5580000043 , Cable Part No.-5580000044 , Cable Part No.-5580000045 , Cable Part No.-5580000047 , Cable Part No.-5580000048 , Cable Part No.-5580000086 , Cable Part No.-5580000087 , Cable Part No.-5580000090 , Cable Part No.-5580000091 , Cable Part No.-5580000848 , Cable Part No.-5580000849 , Cable Part No.-5580000851 , Cable Part No.-5580000853 , Cable Part No.-5580000861 , Wire Part No.-3176000662 , Cable Part No.-5580000927 , Hose Part No.-5580000992 , Hose Part No.-5580000995 , Shrinking Tub. Part No.-5580001029 , Spiral Hose Part No.-5580001100 , Spiral Wrap Part No.-5580001101 , Shrinking Tub. Part No.-5580001153 , Pyro-Tape Part No.-5580001176 , Seal Part No.-5580001182 , Cable Part No.-5580001185 , Seal-Window Part No.-5580001191 , Heat Shrink.Bo. Part No.-5580001221 , Cable Part No.-5580001319 , Cylinder Part No.-5728202220 , Rubber Profi Part No.-5580002111 , Rubber Profi Part No.-5580002112 , Disc Part No.-5580002122 , Disc Part No.-5580002186 , Harness Part No.-5580002194 , Mudguard Part No.-5580002249 , Seal Kit Part No.-5580002334 , Shaft-Axle Part No.-5580002371 , Solenoid Part No.-5580002387 , Valve-Counte Part No.-5580002472 , Protection C Part No.-5580002475 , Protection C Part No.-5580002476 , Key Ring Part No.-5580002478 , Seal Part No.-5580002480 , Valve Part No.-5580002481 , Washer Part No.-5580002483 , Wiper Arm Part No.-5580002486 , Wiper Arm Part No.-5580002487 , Nozzle Set Part No.-5580002495 , Wiper Blade Part No.-5580002496 , Protection Part No.-5580002502 , Hinge Part No.-5580002503 , Spring Part No.-5580002511 , Spring Part No.-5580002512 , Iso Mount Part No.-5580002514 , Harness Part No.-5580002516 , Attachment Part No.-5580002517 , Cap Part No.-5580002536 , Hinge Part No.-5580002538 , Shaft Part No.-5580002541 , Shaft Part No.-5580002542 , Protect. Shi Part No.-5580002554 , Wiper Motor Part No.-5580002577 , Wiper Part No.-5580002600 , Wiper Part No.-5580002601 , Wiper Part No.-5580002602 , Wiper Part No.-5580002603 , Valve Part No.-5580002660 , Valve Set Part No.-5580002675 , Wiper Part No.-5580002678 , Wiper Part No.-5580002679 , Wiper Part No.-5580002683 , Valve Block Part No.-5580002685 , Cable Part No.-5580002693 , Cable Part No.-5580002700 , Wiperblade Part No.-5580002754 , Pane Part No.-5580002757 , Pane Part No.-5580002758 , Piston Part No.-5580002771 , Piston Rod Part No.-5580002772 , Cover Part No.-5580002773 , Seal Kit Part No.-6060011087 , Piston Rod Part No.-5580002785 , Valve Part No.-5580002795 , Hydraulic Pu Part No.-5580002811 , Harness Part No.-5580002812 , Harness Part No.-5580002813 , Harness Part No.-5580002814 , Harness Part No.-5580002815 , Harness Part No.-5580002848 , Harness Part No.-5580002849 , Pane Part No.-5580002989 , Pane Part No.-5580002991 , Pane - Left Part No.-5580002994 , Shim Part No.-5580003037 , Mount Bracke Part No.-5580003057 , Switch Panel Part No.-5580003120 , Geared Pump Part No.-5580003156 , Valve Set Part No.-5580003220 , Valve Block Part No.-5580003285 , Hudraulic Pu Part No.-5580003299 , Hydraulic Pu Part No.-5580003305 , Element Part No.-5580003404 , Driveline Part No.-5580003411 , Driveline Part No.-5580003412 , Driveline Part No.-5580003413 , Cap Holder Part No.-5580003414 , Coupling Part No.-5580003422 , Cap Part No.-5580003423 , Plug Part No.-5580003426 , Plug Part No.-5580003427 , Plug Part No.-5580003428 , Plug Part No.-5580003430 , Plug Part No.-5580003431 , Counter Bala Part No.-5580003433 , Cartridge Part No.-5580003437 , Plug Part No.-5580003438 , Plug Part No.-5580003440 , Link Part No.-5580003471 , Pressure Swi Part No.-5580003476 , Pane Part No.-5580003527 , Stab Sensor Part No.-5580003628 , Hose Part No.-5580003664 , Tube Part No.-5580003690 , Cooler Assy Part No.-5580003693 , Steer Pin Part No.-5580003726 , Steer Pin Part No.-5580003727 , Adapter Flange Part No.-5580003737 , Hook Compl. Part No.-5580003750 , Brake Valve Part No.-5580003754 , Clutch Part No.-5580003776 , Couple Part No.-5580003812 , Cable Part No.-5580003857 , Cable Part No.-5580003860 , Cable Part No.-5580003861 , Cable Part No.-5580003863 , Cable Part No.-5580003864 , Cable Part No.-5580003865 , Exhaust Tube Part No.-5580003870 , Trunnion Cap Part No.-5580003875 , Trunnion Cap Part No.-5580003880 , Mount.Retain Part No.-5580003886 , Mount Part No.-5580003897 , Lubr. Valve Part No.-5580003915 , Valve Part No.-5580003916 , Lubr. Valve Part No.-5580003938 , Pump Part No.-5580003952 , Exhaust Pipe Part No.-5580003967 , Brake Valve Part No.-5580003986 , Disc Clutch Part No.-5580004025 , Piston Ring Part No.-5580004026 , Spring Part No.-5580004027 , Bearing Part No.-5580004029 , Damper Part No.-5580004040 , Check Valve Part No.-5580004046 , Shaft Compl. Part No.-5580004049 , Ring-Retaini Part No.-5580004054 , Snap Ring Part No.-5580004056 , Retainer Rin Part No.-5580004058 , Spacer Part No.-5580004059 , Spacer Part No.-5580004062 , Assy - Disc Part No.-5580004063 , Clutch Speed Part No.-5580004072 , Control Valv Part No.-5580004083 , Spring Part No.-5580004084 , Gasket Part No.-5580004092 , Spring Part No.-5580004093 , Fuel Filter Part No.-5580004128 , Ventil Part No.-5580004133 , Pump Part No.-5580004147 , Wiper Engine Part No.-5580004278 , Wiper Arm Part No.-5580004280 , Wiper Motor Part No.-5580004281 , Wiper Blade Part No.-5580004282 , Wiper Arm Part No.-5580004283 , Water Pump S Part No.-5580004284 , Breather Fil Part No.-5580004291 , Spacer Ring Part No.-5580004359 , Pin Latch Le Part No.-5580004383 , Valve Assy Part No.-5580004560 , Gasket Part No.-5580004580 , Spring Set Part No.-5580004589 , Insert Part No.-5580004594 , Strip Part No.-5580004606 , Terminal-Spa Part No.-5580004622 , Insert Part No.-5580004693 , Plate Part No.-5580004719 , Solenoid Part No.-5580004725 , Cover Part No.-5580004740 , Disk Set Part No.-5580004741 , Washer Part No.-5580004746 , Diff Pinion Part No.-5580004748 , Oil Seal Ret Part No.-5580004750 , Diff Kit Part No.-5580004751 , Thrust Washe Part No.-5580004814 , Exhaust Part Part No.-5580004864 , Exhaust Bend Part No.-5580004866 , Klamma Part No.-5580004869 , Flexible Hos Part No.-5580004870 , Radiator Mou Part No.-5580004879 , Cradle Part No.-5580004898 , Mount Part No.-5580004902 , Pump Part No.-5580004904 , Keypad Compl Part No.-5580004961 , Knob Part No.-5580004977 , Switch Part No.-5580004979 , Wiper Compl. Part No.-5580004987 , Attacment Part No.-5580005114 , Trunnion Cap Part No.-5580005143 , Trunnion Cap Part No.-5580005146 , Trunnion Cap Part No.-5580005148 , Trunnion Cap Part No.-5580005150 , Fuse Holder Part No.-5580005180 , Cable Part No.-5580005181 , Harness Part No.-5580005191 , Rubber Mat Part No.-5580005199 , Mount Part No.-5580005203 , Attachment Part No.-5580005249 , Spacer Part No.-5580005253 , Spacer, Star Part No.-5580005260 , Wiper Arm Part No.-5580005284 , Blower Part No.-5580005290 , Drive Arm -8 Part No.-5580005351 , Dipstick Tub Part No.-5580005357 , Dipstick Part No.-5580005358 , Kontakt Part No.-5580005362 , Stift Part No.-5580005363 , Drop Box -16 Part No.-5580005450 , Upbox Part No.-5580005452 , Housing Part No.-5580005480 , Lub Nipple Part No.-5580005498 , Drive Line-C Part No.-5580005503 , Seal Kit Part No.-5580005516 , Seal Kit Part No.-5580005517 , Ring Gear Bo Part No.-5580005524 , Seal Kit Part No.-5580005540 , Wiper Blade Part No.-5580005556 , Back-Up Ring Part No.-0661150049 , Retaining Ri Part No.-0335212200 , Cable Part No.-5580005617 , Flange Part No.-5580005619 , Sealing Part No.-5580005660 , Tube Radiato Part No.-5580005678 , Radiator St2 Part No.-5580005682 , Press.Transduc. Part No.-5580005686 , Cable Part No.-5580005688 , Switch Box Part No.-5580005691 , Pane Part No.-5580005695 , Press.Transduc. Part No.-5580005761 , Diff.Kit Part No.-5580005772 , Shim Part No.-5580005803 , Shim Part No.-5580005804 , Ventil D/H/S Part No.-5580005837 , Valve Kit Part No.-5580005863 , Stretch Scre Part No.-5580005868 , Cover Part No.-5580005873 , Sensor Part No.-5580005874 , Tubes, V-Fin Part No.-5580005876 , Tubes, V-Fin Part No.-5580005877 , Support Bar Part No.-5580005878 , Mount Part No.-5580005896 , Seal Kit Part No.-5580005926 , Givarhuvud Part No.-5580005951 , Friction Dis Part No.-5580006011 , Cooler Part No.-5580006043 , Seal Kit Part No.-5580006067 , Cartridge Part No.-5580006080 , Seal Kit Part No.-5580006089 , Piston Pump Part No.-5580006108 , Rim Part No.-5580006118 , Bracket Part No.-5580006122 , Valve Block Part No.-5580006153 , Gear/Pinion Part No.-5580006192 , Seal Kit Part No.-5580006197 , Seal Part No.-5580006198 , Seal Part No.-5580006199 , Seal Part No.-5580006200 , Valve Part No.-5580006201 , Valve Part No.-5580006202 , Valve Part No.-5580006203 , Valve Part No.-5580006204 , Body Part No.-5580006235 , Tube Part No.-5580006265 , Switch Panel Part No.-5580006379 , Panel Plate Part No.-5580006382 , Tube-Transm Part No.-5580006412 , Attachm. Pla Part No.-5580006437 , Control Valv Part No.-5580006442 , Rorvinkel Part No.-5580006447 , Valve Part No.-5580006483 , Spacer Part No.-5580006504 , Support Part No.-5580006511 , Support Part No.-5580006512 , Harness Part No.-5580006541 , Relief Valve Part No.-5580006552 , Relief Valve Part No.-5580006553 , Relief Valve Part No.-5580006554 , Harness Part No.-5580006559 , Frame Part No.-5580006569 , Pipe Part No.-5580006580 , Sensor Part No.-5580006581 , Gummislang Part No.-5580006589 , Silicone Con Part No.-5580006591 , Thermostat Part No.-5580006614 , Pump Part No.-5580006616 , Gasket Part No.-5580006618 , Gasket Part No.-5580006619 , Sensor Part No.-5580006633 , Sensor Part No.-5580006636 , Sensor Part No.-5580006637 , Sensor Part No.-5580006643 , Trunnion Cap Part No.-5580006769 , Switch Part No.-5580006802 , Temp.Regulat Part No.-5580006808 , Link Part No.-5580006848 , Tube Part No.-5580006853 , Tube Part No.-5580006854 , Tube Part No.-5580006857 , Bearing Reta Part No.-5580006868 , Brake Pedal Part No.-5580006876 , Overfall Part No.-5580006883 , Shaft Part No.-5580006961 , Shaft Part No.-5580006966 , Bolt Part No.-5580006967 , O-Ring Part No.-5580006968 , Return Filte Part No.-5580006996 , Driveline 6C Part No.-5580007007 , Washer Part No.-5580007018 , Pinion Part No.-5580007020 , Screen Part No.-5580007046 , Distans St7 Part No.-5580007053 , Shims Part No.-5580007117 , Shims Part No.-5580007118 , Shims Part No.-5580007119 , Shims Part No.-5580007120 , Spacer Ring Part No.-5580007135 , Lock Pin Part No.-5580007140 , Valve Block Part No.-5580007152 , Valve Block Part No.-5580007154 , Mount Part No.-5580007218 , Impact Socke Part No.-5580007284 , Block Part No.-5580007300 , Gearpump Part No.-5580007327 , O-Ring Part No.-5580007334 , Cushion Part No.-5580007339 , Cushion Part No.-5580007340 , Gear Part No.-5580007343 , Bellow Part No.-5580007344 , Swing Arm Part No.-5580007348 , Arm Rest Part No.-5580007351 , Arm Rest Part No.-5580007352 , Insats Part No.-5580007355 , Gear Motor Part No.-5580007375 , Cap Holder Part No.-5580007417 , Switch Part No.-5580007447 , Lamp Part No.-5580007448 , Pump Set Part No.-5580007469 , Attachment Part No.-5580007470 , Coil Part No.-5580007484 , Reverse Alarm Part No.-5580007514 , Reverse Alar Part No.-5580007516 , Kugghjulspum Part No.-5580007524 , Attachment Part No.-5580007611 , Rubber Packi Part No.-5580007669 , Rubber Packi Part No.-5580007670 , Rubber Prote Part No.-5580007683 , Collar Part No.-5580007693 , Cap Part No.-5580007694 , Cover Part No.-5580007695 , O-Ring Set Part No.-5580007696 , Seal Part No.-5580007698 , Solenoid Part No.-5580007701 , Pump Part No.-5580007702 , Bearing Part No.-5580007703 , Bom Stands Part No.-5580007715 , Ehaust Elbow Part No.-5580007807 , Steer Pin Part No.-5580007828 , Fuel Filter Part No.-6060008044 , Filter Compl. Part No.-5580007866 , Expanding Sh Part No.-5580007875 , Expanding Sh Part No.-5580007876 , Lamp Part No.-5580007890 , Dipstick, Tr Part No.-5580008064 , Dipstick Tub Part No.-5580008066 , Valve Part No.-5580008078 , Sealkit Part No.-5580008080 , Sealkit Part No.-5580008081 , Exhaust Bend Part No.-5580008155 , Check Valve Part No.-5580008212 , Drivlina (7C Part No.-5580008228 , Dropbox Rplc Part No.-5580008250 , Protection Part No.-5580008307 , Timing Relay Part No.-5580008376 , Mount Part No.-5580008399 , Plate Part No.-5580008501 , Overcentre C Part No.-5580008505 , Cover Plate Part No.-5580008588 , Gasket Part No.-5580008672 , Key Board Part No.-5580008692 , Kylare Part No.-5580008703 , Pane - Right Part No.-5580008775 , Nipple Part No.-5580008916 , Upbox Part No.-5580008919 , Flange Conne Part No.-5580008964 , Pulley Part No.-5580009002 , Temp.Givare Part No.-5580009012 , Rem Part No.-5580009040 , Attachment Part No.-5580009087 , Shaft Part No.-5580009088 , Harness A20d Part No.-5580009250 , Harness Part No.-5580009264 , Tube Part No.-5580009276 , Dip Stick Part No.-5580009277 , Ror Part No.-5580009290 , Ror Part No.-5580009291 , Harness Part No.-5580009317 , Seal Kit Part No.-5580009391 , Seal Kit Part No.-5580009392 , Return Pipe Part No.-5580009436 , Check Valve Part No.-5580009695 , Link Arm Part No.-5580009719 , Radiator Part No.-5580009727 , Tube Part No.-5580009732 , Grease Pump Part No.-5580009759 , Actuator Part No.-5580010006 , Shim Part No.-5580010036 , Bearing Part No.-5580010037 , Seal Part No.-5580010039 , O-Ring Part No.-5580010040 , Lock Ring Part No.-5580010041 , Shims Part No.-5580010107 , Radiator Ass Part No.-5580010128 , Kylarror Part No.-5580010129 , Oil Cooler Part No.-5580010130 , Kylarror Part No.-5580010131 , Kylarror Part No.-5580010132 , Washer Part No.-5580010135 , Riktningsven Part No.-5580010168 , Bearing Kit Part No.-5580010176 , Regulator Part No.-5580010183 , Nozzle Part No.-5580010249 , Cover Panel Part No.-5580010252 , Relay Mount Part No.-5580010253 , Relay Mount Part No.-5580010254 , Holder Part No.-5580010260 , Motor Bracke Part No.-5580010281 , Cover Plate Part No.-5580010284 , Platskydd Part No.-5580010287 , Plc With Pro Part No.-5580010290 , Turbo Part No.-5580010292 , Hinge Part No.-5580010300 , Hinge Part No.-5580010301 , Platskydd Part No.-5580010309 , Platta Part No.-5580010312 , Repair Kit Part No.-5580010313 , Drive Belt Part No.-5580010333 , Plastic Pane Part No.-5580010347 , Extension Part No.-5580010397 , Link Part No.-5580010424 , Link Part No.-5580010425 , Brake Part No.-5580010433 , Dipstick Part No.-5580010441 , Plate Part No.-5580010469 , Mutter Part No.-5580010490 , Screw Part No.-5580010491 , Check Cartri Part No.-5580010496 , Seal Kit Part No.-5580010498 , Cable Complete Part No.-5580010503 , Check Valve Part No.-5580010578 , Solenoid Car Part No.-5580010579 , Coil Part No.-5580010580 , Spring Part No.-5580010652 , Tube Part No.-5580010661 , Tube Part No.-5580010662 , Lagerhallare Part No.-5580010697 , Tube Part No.-5580010720 , Gear Pump Part No.-5580010730 , Charge Valve Part No.-5580010750 , Cover Part No.-5580010759 , Cover, Stab Part No.-5580010771 , Tube Part No.-5580010772 , Attachment Part No.-5580010777 , Attachment Part No.-5580010781 , Inside Door Part No.-5580010830 , Hinge Mount Part No.-5580010831 , Cover Part No.-5580010863 , Kit Part No.-5580010883 , Seal Kit Part No.-5580010886 , Kit Part No.-5580010887 , Dip Stick Part No.-5580010918 , Siliconslang Part No.-5580011030 , Sensor Part No.-5580011074 , Friction Was Part No.-5580011080 , Sensor Part No.-5580011187 , Sensor Part No.-5580011189 , Sensor Part No.-5580011208 , Sensor Part No.-5580011210 , Bearing Part No.-5580011327 , Ring Part No.-5580011388 , Spacer Part No.-5580011394 , Seal Kit Part No.-5580011536 , Wiper Part No.-5580011541 , Wiper Part No.-5580011549 , Valve Set Part No.-5580011585 , Valve Set Part No.-5580011615 , Valve Set Part No.-5580011616 , Valve Set Part No.-5580011628 , Valve Set Part No.-5580011636 , Pump Part No.-5580011689 , Flash Light Part No.-5580011755 , Kit Part No.-5580011777 , Shaft Part No.-5580011786 , Distribution Part No.-5580011838 , Oil Line Part No.-5580011989 , Bearing Part No.-5580012090 , Screw Part No.-5580012121 , Cover Part No.-5580012122 , O-Ring Part No.-5580012127 , Cover Part No.-5580012210 , Grate Part No.-5580012220 , Seal Kit Part No.-5580012228 , Seal Kit Part No.-5580012231 , Driveline Part No.-5580012256 , Driveline Part No.-5580012257 , Tank Cover Part No.-5580012264 , Tank Cover Part No.-5580012265 , Plain Bearin Part No.-5580012283 , Set Screw Part No.-5580012294 , Seal Kit Part No.-5580012297 , Tube Bend Part No.-5580012374 , Sprocket Whe Part No.-5580012401 , Sprocket Whe Part No.-5580012408 , Sprocket Whe Part No.-5580012413 , Gear Hub Part No.-5580012470 , Grate Part No.-5580012499 , Tensioner Part No.-5580012546 , Sensor Part No.-5580012550 , Water Pump Part No.-6060010698 , Sensor Part No.-5580012554 , Vibr.Damper Part No.-5580012567 , Mount Part No.-5580012572 , Lock Ring Part No.-5580012654 , Lock Part No.-5580012656 , Switch-Selec Part No.-5580012662 , Collar Part No.-5580012739 , Seal Kit Part No.-5580012757 , Tube Inlet Part No.-5580012765 , Mount Accum Part No.-5580012812 , Seal Kit Part No.-5580012893 , Restriction Part No.-5580012894 , Valve Part No.-5580012895 , Thermostat Part No.-5580012911 , Turbo Part No.-5580012915 , Gasket Part No.-5580012916 , Pump Part No.-5580012924 , Cover Part No.-5580012943 , Driveline Part No.-5580012960 , Auxiliary Va Part No.-5580012961 , Retainer Part No.-5580012980 , Dip Stick Part No.-5580012982 , O-Ring Part No.-5580012995 , Sight Glass Part No.-5580013005 , Seal Kit Part No.-5580013024 , Seal Kit Part No.-5580013025 , Seal Kit Part No.-5580013026 , Valve Part No.-5580013027 , Bearing Pivo Part No.-5580013036 , Spacer Part No.-5580013047 , Filler Cap Part No.-5580013049 , Relay Box Part No.-5580013091 , Relay Box Part No.-5580013092 , Cable Complete Part No.-5580013156 , Cable Complete Part No.-5580013166 , Converter Part No.-5580013189 , Valve Part No.-5580013200 , Sealkit Part No.-5580013337 , Converter Part No.-5580013391 , Starter Part No.-5580013422 , Washer Part No.-5580013430 , Tube-Oil Fil Part No.-5580013480 , Cover Part No.-5580013493 , Sleeve Part No.-5580013500 , Dip Stick Part No.-5580013518 , Tube Part No.-5580013519 , Gasket Part No.-5580013520 , Step Assy. Part No.-5580013602 , Pressure Swi Part No.-5580013623 , Snap Ring Part No.-5580013643 , Tryckvakt Part No.-5580013722 , Tryckvakt Part No.-5580013723 , Gasket Part No.-5580013764 , Seal Part No.-5580013766 , Turbo Part No.-5580013773 , Water Pump Part No.-5580013774 , Oil Cooler Part No.-5580013778 , Gasket Part No.-5580013779 , O-Ring Part No.-5580013780 , Seal Part No.-5580013785 , Thermostat Part No.-5580013786 , Repair Kit S Part No.-5580013825 , Repair Kit P Part No.-5580013826 , Seal Kit Part No.-5580013859 , Seal Kit Part No.-5580013869 , Uppgradingk Part No.-5580013886 , Oil Cooler Part No.-5580013937 , General Shop Part No.-5580014021 , Plier Set Part No.-5580014051 , Set Of Hex & Part No.-5580014065 , Ratchet Hand Part No.-5580014069 , Sats Part No.-5580014071 , Pull Rod Set Part No.-5580014122 , Seal Kit Part No.-5580014125 , Seal Kit Part No.-5580014127 , Seal Kit Part No.-5580014133 , Main Relief Part No.-5580014134 , Pressure Val Part No.-5580014139 , Thermostat Part No.-5580014141 , Trunn. Block Part No.-5580014149 , Pin Part No.-5580014212 , Cover Plate Part No.-5580014214 , Pump Part No.-5580014238 , Seal Kit Part No.-5580014260 , Bucket Stop Part No.-5580014306 , Collar Part No.-5580014316 , Blade Part No.-5580014324 , Clutch Assy Part No.-5580014328 , Pull Rod Part No.-5580014514 , Washer Part No.-5580014528 , Cap-Kit Part No.-5580014539 , Wear Bar Part No.-5580014577 , Wear Bar Part No.-5580014578 , Sensor House Part No.-5580014608 , Kit-Maint 50 Part No.-5580014643 , Kit-Maint 10 Part No.-5580014644 , Spring Set Part No.-5580014773 , Seal Kit Part No.-5580014774 , Gas Valve Part No.-5580014818 , Cap Part No.-5580014819 , Remote Valve Part No.-5580014931 , Impact Socke Part No.-5580014936 , Spool Part No.-5580015042 , Bearing Part No.-5580015047 , Spring Set Part No.-5580015191 , Driveline Part No.-5580015261 , Seal Kit Part No.-5580015556 , Tube Part No.-5580015577 , Tube Part No.-5580015578 , Piston Rod Part No.-5580015644 , Cover Part No.-5580015645 , Piston Part No.-5580015646 , Turbo Part No.-5580015711 , Dip Stick Part No.-5580015714 , Pump Part No.-5580015727 , Screw Part No.-5580015728 , Cover Part No.-5580015729 , O-Ring Part No.-5580015730 , O-Ring Part No.-5580015731 , Valve Block Part No.-5580015839 , Valve Set Part No.-5580015896 , Check Valve Part No.-5580016137 , Spring Part No.-5580016263 , Spring Set Part No.-5580016300 , Seal Kit Part No.-5580016306 , Shock Absorb Part No.-5580016311 , Valve Part No.-5580016312 , Seal Kit Part No.-5580016313 , Bolt Set Part No.-5580016314 , Bearing Part No.-5580016365 , Seal Kit Part No.-5580016367 , Bearing Ball Part No.-5580016390 , Trunnion Cap Part No.-5580016528 , Guide Housin Part No.-5580016547 , Gasket Part No.-5580016640 , Tension Whee Part No.-5580016642 , Plug Part No.-5580016643 , Washer Part No.-5580016644 , Plug Part No.-5580016645 , Sensor Part No.-5580016647 , Sensor Part No.-5580016648 , Sensor Part No.-5580016649 , Sensor Part No.-5580016650 , Roller Part No.-5580016677 , Lock Ring Part No.-5580016678 , Seal Kit Part No.-5580016680 , Overhaul Kit Part No.-5580016681 , Output Shaft Part No.-5580016686 , Flange Part No.-5580016689 , Washer Part No.-5580016693 , Spacer Ring Part No.-5580016695 , Spacer Part No.-5580016718 , Seal Kit Part No.-5580016740 , Overhaul Kit Part No.-5580016741 , Yoke Part No.-5580016748 , Tube Part No.-5580016769 , Cotter Pin Part No.-5580016789 , Impeller Part No.-5580016792 , Bearing Part No.-5580016988 , Seal Kit Part No.-5580017023 , Seal Kit Part No.-5580017025 , Seal Kit Part No.-5580017088 , Shuttle Valv Part No.-5580017089 , Hose Part No.-5580017099 , Valve Comple Part No.-5580017418 , O-Ring Part No.-5580018510 , O-Ring Part No.-5580018511 , O-Ring Part No.-5580018512 , O-Ring Part No.-5580018513 , O-Ring Part No.-5580018514 , Spring Part No.-5580018515 , Seal Part No.-5580018522 , Seal Part No.-5580018526 , O-Ring Part No.-5580018528 , O-Ring Part No.-5580018529 , Electric Motor Part No.-5580018691 , Seal Kit Part No.-5580019354 , Shuttle Valve Part No.-5580019388 , Cylinder Part No.-5580020566 , Cable Part No.-5580020944 , Wiper Part No.-0665921400 , Seal Kit Part No.-5580021507 , Bushing Part No.-5580022820 , Nipple Part No.-5580023016 , Rim Compl. Part No.-5580023110 , Rim Complete Part No.-5580023112 , Washer Part No.-5580023147 , Bearing-Dli Part No.-5580023278 , Safety Devic Part No.-5580023534 , Fan Wheel Part No.-5580025311 , Field Kit Part No.-5580025535 , Pin Part No.-5580026831 , Seal Kit Part No.-5580026899 , Mount Part No.-5580027096 , Mount Part No.-5580027097 , Level Sensor Part No.-5580081812 , Shaft Part No.-5580101028 , Rim Compl. Part No.-5580101114 , Get Locking Part No.-5580101290 , Shroud Part No.-5580101318 , Shroud Part No.-5580101319 , Shroud Part No.-5580101320 , Shroud Part No.-5580101321 , Washer Part No.-5580102315 , Safety Devic Part No.-5580103031 , Gauge Cluster Part No.-5580103288 , Filter Part No.-5580108551 , Element Part No.-5580109441 , Valve Part No.-5580110382 , Expanding Sh Part No.-5589999200 , Expanding Sh Part No.-5589999201 , Expanding Sh Part No.-5589999202 , Expanding Sh Part No.-5589999203 , Expanding Sh Part No.-5589999204 , Expanding Bu Part No.-5589999700 , Expanding Bu Part No.-5589999701 , Expanding Bu Part No.-5589999702 , Rubber Washe Part No.-5590000054 , Shaft-Axle Part No.-5590000070 , Shaft-Axle Part No.-5590000071 , Knob Part No.-5590000093 , Switch Part No.-5590000094 , Motor Part No.-5590000099 , Housing Part No.-5590000115 , Wheel Part No.-5590000116 , Evaporator Part No.-5590000117 , Valve Part No.-5590000119 , Cover Part No.-5590000120 , Seal Part No.-5590000183 , Seal Part No.-5590000184 , Nut Part No.-5590000193 , Panel Inst Part No.-5590000206 , Drivers Chai Part No.-5590000288 , Ljuddampare Part No.-5590000331 , Exhaust Pipe Part No.-5590000332 , Hood Weldmen Part No.-5590000334 , Fender Part No.-5590000335 , Hinge Assemb Part No.-5590000339 , Driveline Part No.-5590000437 , Driveline Part No.-5590000438 , Drivlina Part No.-5590000439 , Silencer Mod Part No.-5590016228 , Rubbermouldi Part No.-5590000501 , Rubbermouldi Part No.-5590000502 , Rubbermouldi Part No.-5590000508 , Spacer Part No.-5590000509 , Mount Fan Pu Part No.-5590000512 , Mount Tensio Part No.-5590000517 , Lock Device Part No.-5590000583 , Fuel Gauge Part No.-5590000620 , Fan Part No.-5590000648 , Hose Engine Part No.-5590000659 , Hose Engine Part No.-5590000660 , Remskiva Part No.-5590000668 , Axel Part No.-5590000669 , Block Part No.-5590000677 , Block Part No.-5590000678 , Control Pane Part No.-5590000686 , Generator Part No.-5590000737 , Pto Part No.-5590000772 , Gasket Part No.-5590000792 , Mount Part No.-5590000797 , Ground Cable Part No.-5590000833 , Harness Part No.-5590000854 , Dump Cylinde Part No.-5590000870 , Cable Part No.-5590000900 , Attachment Part No.-5590000915 , Rim Part No.-5590000951 , Cone Part No.-5590000954 , Stopp Part No.-5590000987 , Gasket, Shim Part No.-5590001029 , Driveline Part No.-5590001073 , Converter Part No.-5590001087 , Belt Drive Part No.-5590001136 , Bearing Bush Part No.-5590001153 , Roller Beari Part No.-5590001156 , Oil Cooler Part No.-5590001163 , Oil Cooler Part No.-5590001164 , Roller Beari Part No.-5590001165 , Roller Beari Part No.-5590001169 , Sealring Part No.-5590001177 , Gasket Part No.-5590001181 , Gasket Part No.-5590001182 , Seal Part No.-5590001189 , Bleeder Valv Part No.-5590001194 , Spring Part No.-5590001195 , Spring Part No.-5590001196 , Guide Ring Part No.-5590001197 , Roller Beari Part No.-5590001209 , Ring Part No.-5590001210 , Nut Part No.-5590001211 , Sun Gear Part No.-5590001215 , Thrust Ring Part No.-5590001219 , Thrust Ring Part No.-5590001220 , Gear Part No.-5590001221 , Thrust Washe Part No.-5590001223 , Breather Part No.-5590001235 , Outer Disc Part No.-5590001242 , Housing Part No.-5590001247 , Housing Part No.-5590001248 , Gearring Part No.-5590001251 , Retainer Part No.-5590001253 , Pinion Part No.-5590001259 , Cover Part No.-5590001262 , Driveline Part No.-5590001285 , Brake Pedal Part No.-5590001438 , Cable Complete Part No.-5590001691 , Cable Complete Part No.-5590001692 , Cable Complete Part No.-5590001693 , Trunion Cap Part No.-5590001739 , Switch Part No.-5590001751 , Control Arm Part No.-5590001762 , Protection Hose Part No.-5590001808 , Protection Hose Part No.-5590001810 , Seal Fitting Part No.-5590001814 , Gland Part No.-5590001816 , Nut(Back Nut) Part No.-5590001817 , Manifold Part No.-5590001818 , Plate Part No.-5590001964 , Attachm. Cam Part No.-5590001967 , Disc Part No.-5590001971 , Wiper Motor Part No.-5590001992 , Tippcylinder Part No.-5590016694 , Lock Set Part No.-5590002093 , Hydraulic Mo Part No.-5590002097 , Hydraulic Pu Part No.-5590002109 , Brake Pedal Part No.-5590002111 , Rubber Hose Part No.-5590002113 , Spareparts S Part No.-5590002134 , Switch Panel Part No.-5590002142 , Fonsterlist Part No.-5590002147 , Grease Pump Part No.-5590002214 , Safety Valve Part No.-5590002358 , Mount Dropbo Part No.-5590002359 , Surge Tank Part No.-5590002364 , Shaft Part No.-5590002547 , Washer Part No.-5590002549 , Distance Part No.-5590002550 , Cover Part No.-5590002632 , Box Part No.-5590002636 , Cover Part No.-5590002638 , Shaft Mt42 Part No.-5590002787 , Silencer Part No.-5590002987 , Damper Assy Part No.-5590003145 , Washer Part No.-5590003213 , Tube Part No.-5590003288 , Defroster Part No.-5590003330 , Distance Pla Part No.-5590003358 , Attachment Part No.-5590003538 , Direction In Part No.-5590003586 , Shaft Part No.-5590003591 , Shaft Part No.-5590003592 , Wheel Stud Part No.-5590003594 , Piston Part No.-5590003621 , Gasket Part No.-5590003622 , Gasket Part No.-5590003623 , Brake Carrie Part No.-5590003624 , Oljesticka Part No.-5590003625 , Suction Pipe Part No.-5590003634 , Level Sensor Part No.-5590003638 , Face Seal Part No.-6060006499 , Housing Part No.-5590003750 , Piston Guide Part No.-5590003751 , Planetary Ca Part No.-5590003753 , Sun Gear Part No.-5590003754 , Sun Gear Part No.-5590003755 , Planet Gear Part No.-5590003757 , Planet Gear Part No.-5590003758 , Shaft Part No.-5590003765 , Gear Wheel Part No.-5590003766 , Roller Beari Part No.-5590003767 , Cover Part No.-5590003768 , Ring Gear Part No.-5590003772 , Oil Pump Part No.-5590003773 , Flange Part No.-5590003774 , Gear Wheel Part No.-5590003776 , Shaft Part No.-5590003777 , Shaft Part No.-5590003780 , Flange Part No.-5590003785 , Ring Gear Ca Part No.-5590003790 , Differential Part No.-5590003795 , Differential Part No.-5590003796 , Differential Part No.-5590003797 , Differential Part No.-5590003798 , Disk Part No.-5590003799 , Instrumentpa Part No.-5590003857 , Bearing Bush Part No.-5590003870 , Tapered Roll Part No.-5590003871 , Tapered Roll Part No.-5590003872 , Tapered Roll Part No.-5590003877 , Tapered Roll Part No.-5590003879 , Drive Flange Part No.-5590003880 , Extension Part No.-5590003884 , Gear Wheel Part No.-5590003886 , Flange Part No.-5590003896 , Gear Wheel Part No.-5590003897 , Shaft Part No.-5590003898 , Gear Wheel Part No.-5590003927 , Shaft Part No.-5590003928 , Shaft Part No.-5590003929 , Cover Part No.-5590003931 , Pol Wheel Part No.-5590003932 , Retainer Part No.-5590003936 , Oil Lever Ga Part No.-5590003938 , Exhaust Cove Part No.-5590003979 , Ring Part No.-5590004005 , Ring Part No.-5590004006 , Nut Part No.-5590004007 , Planetary Ca Part No.-5590004009 , Sun Gear Part No.-5590004010 , Planetary Ge Part No.-5590004011 , Thrust Washe Part No.-5590004012 , Planetary Pi Part No.-5590004015 , Planetary Pi Part No.-5590004016 , Ring Gear Ca Part No.-5590004017 , Mount Part No.-5590004079 , Bearing Reta Part No.-5590004149 , Dip Stick Part No.-5590004233 , Suction Pipe Part No.-5590004352 , Yoke Set Part No.-5590004365 , Turbo Part No.-5590004721 , Sensor Part No.-5590004723 , Oil Filter Part No.-6060008046 , Capscrew Part No.-5590004788 , Roller Beari Part No.-5590004795 , Snap Ring Part No.-5590004797 , Ring Part No.-5590004801 , Retaining Ri Part No.-5590004802 , Piston Ring Part No.-5590004803 , Piston Ring Part No.-5590004804 , Lock Washer Part No.-5590004805 , Gasket Part No.-5590004820 , Shaft,Expand Part No.-5590005001 , Expanding Bu Part No.-5590005002 , Washer, Expa Part No.-5590005003 , Spacer Part No.-5590005005 , Control Pane Part No.-5590005034 , Washer, Expa Part No.-5590005455 , Check Valve Part No.-5590005458 , Control Modu Part No.-5590005493 , Relief Valve Part No.-5590005522 , Valve-Cartri Part No.-5590005639 , Tie Plate Part No.-5590005662 , Distance Pla Part No.-5590005665 , Pilot Valve Part No.-5590005768 , Distance Pla Part No.-5590005872 , Stop Part No.-5590005889 , Mount Part No.-5590005910 , Bearing Part No.-5590005919 , Tube Part No.-5590006050 , Valve (By-Pa Part No.-5590006102 , Mount Part No.-5590006105 , Stop Part No.-5590006165 , Side Mirror Part No.-5590006292 , Attachment Part No.-5590006293 , Switch Box Part No.-5590006322 , Extension Pi Part No.-5590006378 , Insulator Part No.-5590006464 , Washer Part No.-5590006465 , Rain Protect Part No.-5590006566 , Tube Part No.-5590006601 , Temp. Gauge Part No.-5590006667 , Retaining Ri Part No.-5590006691 , Hub Part No.-5590006705 , Thermostat Part No.-5590006762 , Seal Kit Part No.-5590006763 , Harness Part No.-5590006792 , Harness Part No.-5590006793 , Retainer Part No.-5590006799 , Valve Block Part No.-5590006815 , Attachment Part No.-5590006856 , Pilot Valve Part No.-5590006863 , Breather Part No.-5590006881 , Attachment Part No.-5590006929 , Attachment Part No.-5590006944 , Hasness Part No.-5590006986 , Plc System Part No.-5590006987 , Spare Parts Part No.-5590006998 , Tube Shaft Part No.-5590007089 , Gasket Part No.-5590007207 , Protection Part No.-5590007285 , Valve Assy Part No.-5590007408 , Valve Assy Part No.-5590007409 , Valve Assy Part No.-5590007412 , Valve Assy Part No.-5590007416 , Valve Assy Part No.-5590007420 , Valve Assy Part No.-5590007421 , Valve Assy Part No.-5590007424 , Valve Assy Part No.-5590007425 , Valve Assy Part No.-5590007426 , Valve Assy Part No.-5590007427 , Gasket Part No.-5590007451 , Hub Part No.-5590007461 , Press.Rel.Va Part No.-5590007475 , Trunnion Cap Part No.-5590007509 , Wheel Hub Part No.-5590007521 , Outer Disk Part No.-5590007522 , Seal Part No.-5590007546 , Seal Part No.-5590007547 , Gear Pump Part No.-5590007550 , Dump Cylinde Part No.-5590007585 , Sealing Part No.-5590007607 , Mount Part No.-5590007632 , Cover Plate Part No.-5590007682 , Sealing Part No.-5590007695 , Ground Cable Part No.-5590007747 , Trunnion Blo Part No.-5590007792 , Hydraulic Pu Part No.-5590007959 , Lamp Attachment Part No.-5590007971 , Control Modu Part No.-5590007974 , Control Unit Part No.-5590007975 , Attachment Part No.-5590007981 , Raiser Filte Part No.-5590008093 , Panel Part No.-5590008103 , Guard Part No.-5590008119 , Protection Hose Part No.-5590008137 , Gauge-Fuel Part No.-5590008232 , Water Filter Part No.-5590008243 , Gasket Part No.-5590008244 , Tensioner Part No.-5590008248 , Sensor Part No.-5590008255 , Elect.Control Part No.-5590008256 , Sensor Part No.-5590008258 , Sensor Part No.-5590008259 , Cushion Part No.-5590008348 , Cushion Part No.-5590008349 , Hand Rail Part No.-5590008404 , Dip Stick Part No.-5590008443 , Dipstick Tub Part No.-5590008444 , Driveline Guard Part No.-5590008462 , Driveline Guard Part No.-5590008463 , Clamp Part No.-5590008464 , Angle Console Part No.-5590008469 , Wiper Blade Part No.-5590008483 , Plate Part No.-5590008503 , Heat Shield Part No.-5590008518 , Bulkhead Part No.-5590008607 , Roller Beari Part No.-5590008722 , Bearing Ball Part No.-5590008723 , Gasket Part No.-5590008743 , Seal Kit Part No.-5590008861 , Axle Spindle Part No.-5590008865 , Washer Part No.-5590008866 , Seal Kit Part No.-5590008915 , Radiator Part No.-5590008935 , Oil Cooler Part No.-5590008936 , Tube Part No.-5590008971 , Tube Part No.-5590008975 , Tube Part No.-5590008976 , Tube Part No.-5590008982 , Washer Part No.-5590008991 , Control Unit Part No.-5590009152 , Thermostat Part No.-5590009157 , Sensor Part No.-5590009191 , O-Ring Part No.-5590009192 , Attachment Part No.-5590009346 , Pin Part No.-5590009371 , Safety Device Part No.-5590009503 , Safety Device Part No.-5590009509 , Seal Kit Part No.-5590009510 , Rod Part No.-5590009528 , Solenoid Part No.-5590009754 , Valve Part No.-5590009755 , Plug Part No.-5590009756 , Plug Part No.-5590009758 , Valve Part No.-5590009759 , Lens Part No.-5590009815 , Holder Part No.-5590009817 , Lens Part No.-5590009818 , Block Part No.-5590009855 , O-Ring Part No.-5590009960 , O-Ring Part No.-5590009962 , O-Ring Part No.-5590009965 , Protection Hose Part No.-5590010026 , Fan Part No.-5590010155 , Spacer Part No.-5590010353 , Step Part No.-5590010441 , Elbow Part No.-5590010531 , Pipe Part No.-5590010533 , Cover Part No.-5590010564 , Step Part No.-5590010568 , Tube Part No.-5590010590 , Holder Part No.-5590010592 , Tube Part No.-5590010595 , Holder Part No.-5590010699 , Handle Assy Part No.-5590010702 , Mount Part No.-5590010848 , Mount Part No.-5590010851 , Mount Part No.-5590010921 , Hose Set Part No.-5590011012 , Stop Block Part No.-5590011021 , Pipe Part No.-5590011053 , Pipe Part No.-5590011062 , Pipe Part No.-5590011064 , Switch Panel Part No.-5590011070 , Switch Panel Part No.-5590011072 , Control Box Part No.-5590011161 , Converter Part No.-5590011167 , Axle Mount Part No.-5590011279 , Breather Filter Part No.-5590011330 , Filter Element Part No.-5590011541 , Breather Part No.-5590011556 , Gear Control Part No.-5590011885 , Pipe Clamp Part No.-5590011977 , Manometerholder Part No.-5590011990 , Tube Part No.-5590012130 , Surge Tank Part No.-5590012205 , Injector Part No.-5590012237 , Turbo Part No.-5590012239 , Fuel Pump Part No.-5590012240 , Radiator Part No.-5590012241 , After Cooler Part No.-5590012242 , Fan Guard Part No.-5590012243 , Fan Grid Part No.-5590012244 , Cover Part No.-5590012245 , Capscrew Part No.-5590012246 , Support Beam Part No.-5590012248 , Support Beam Part No.-5590012249 , Baffle Plate Part No.-5590012250 , Cooler Pipe Part No.-5590012251 , Cooler Pipe Part No.-5590012252 , Support Beam Part No.-5590012254 , Support Beam Part No.-5590012255 , Baffle Plate Part No.-5590012256 , Baffle Plate Part No.-5590012257 , Cooler Pipe Part No.-5590012258 , Pressure Switch Part No.-5590012294 , Piston Ring Part No.-5590012393 , Bushing Part No.-5590012785 , Service Kit Part No.-5590012881 , Stay Assy Part No.-5590013209 , Cable Complete Part No.-5590013364 , Silencer Part No.-5590013403 , Hydr.Oil Tank Part No.-5590013449 , Pump Part No.-5590013779 , Cylinder Part No.-5590014210 , Cylinder Kom Part No.-5590014226 , Cylinder Kom Part No.-5590014227 , Handle Rod Part No.-5590014470 , Plate Part No.-5590014474 , Sd-Supp. Device Part No.-5590014486 , Cover Part No.-5590014498 , Handle Part No.-5590015119 , Mount Part No.-5590015244 , Weldment Part No.-5590015699 , Block Part No.-5590015992 , Accumulat.Block Part No.-5590016286 , Manifold Part No.-5590016646 , El. Box Set Part No.-5590016653 , Light Inst Part No.-5590016659 , Hatch Part No.-5590016660 , Bracket Part No.-5590016678 , Junction Block Part No.-5590016720 , Junction Block Part No.-5590017106 , Driveline Part No.-5590017160 , Driveline Part No.-5590017161 , Driveline Part No.-5590017162 , Driveline Part No.-5590017163 , Driveline Part No.-5590017164 , Transm. Cool Part No.-5590017697 , Inlet Port Part No.-5590017953 , Washer Part No.-5590018177 , Solenoid Valve Part No.-5590018827 , Dip Stick Part No.-5590018911 , Shuttle Valve Part No.-5590019110 , Cable Set Part No.-5590020107 , Brake Light Part No.-5590024998 , Detector Wire Part No.-5590026041 , Checkfire Part No.-5590026043 , Axle Assy. Part No.-5599999956 , Valve Block Part No.-5724000699 , Rim Compl. Part No.-5728201653 , Screw, Hex Head Part No.-5730015192 , Valve, Relie Part No.-5750000487 , Aux. Contact Part No.-5750001581 , Aux. Contact Part No.-5750001582 , Belt,Flat Part No.-5750532708 , Screw,Countersunk Part No.-5750534623 , Planet Gear Part No.-6060001039 , Solenoid Valve Part No.-6060001266 , U-Joint Part No.-6060001268 , Shaft Seal Part No.-6060001269 , Seal Part No.-6060001328 , Carrier Part No.-6060001345 , Solenoid Val Part No.-6060001392 , Suspension Part No.-6060001665 , Piston Part No.-6060001938 , Seal Kit Part No.-6060002025 , Lever Set Part No.-6060002049 , Diff Assy Part No.-6060002091 , Pilot Valve Part No.-6060002167 , Guide Unit Part No.-6060002173 , Check Valve Part No.-6060002238 , Sensor Part No.-6060002342 , Seal Kit Part No.-6060002364 , Relief Valve Part No.-6060003002 , Switch Part No.-6060003136 , Heater Part No.-6060003137 , Shaft Part No.-6060003378 , Driver Part No.-6060003390 , Washer Part No.-6060003391 , Lock Nut Part No.-6060003393 , Support Bearing Part No.-6060003394 , Tension Wheel Part No.-6060003521 , O-Ring Part No.-6060003710 , O-Ring Part No.-6060003711 , Seal Kit Part No.-6060004082 , Pump Part No.-6060004090 , Oil Filter Part No.-6060004214 , Seal Ring Part No.-6060004258 , Switch Part No.-6060004262 , Cylinder Assy Part No.-6060004442 , Valve Part No.-6060004555 , Wheel Bolt Part No.-6060004880 , Stud Part No.-6060005252 , Different.Gear Part No.-6060005348 , Diff.Case Part No.-6060005349 , Flange Part No.-6060005352 , Seal Part No.-6060005600 , Sleeve Coupling Part No.-6060005606 , Disk Part No.-6060005726 , Seal Kit Part No.-6060006026 , Brake Disc Part No.-6060006386 , Friction Ring Part No.-6060006387 , Gear/Pinion Part No.-6060006491 , Diff.Kit Part No.-6060006575 , Filter Part No.-6060007784 , Filter Element Part No.-6060008040 , Filter Element Part No.-6060008044 , Kit Part No.-6060008772 , Disk Part No.-6060009346 , Friction Pla Part No.-6060009349 , Seal Kit Part No.-6060010898 , Seal Kit Part No.-6060010899 , Filt.Indicator Part No.-6060018550 , Coil Part No.-6060011658 , Lock Nut Part No.-6060013547 , Cover Part No.-6060013653 , Cover Part No.-6060013654 , Set,Seal Part No.-6060015161 , Valve,Contr,Direction,Pn Part No.-6060018793 , Set,Maintenance Part No.-6060140547 , Set,Maintenance Part No.-6060140548 , Cylinder Part No.-8113031112 , Press.Rel.Va Part No.-8113031144 , Compressor Part No.-8115430640 , Compressorbl Part No.-8115460019 , Compressor Part No.-8115470042 , Compressor Part No.-8115470596 , Compressor Part No.-8115901756 , Compressor Part No.-8115901806 , Ball Valve Part No.-8202030105 , Ball Valve Part No.-8202030204 , Ball Valve Part No.-8202030402 , Ball Valve Part No.-8202031103 , Ball Valve Part No.-8202031129 , Ball Valve Part No.-8202031137 , Ball Valve Part No.-8202031145 , Lubr.Valve Part No.-8202511401 , Valve Part No.-8204021078 , Valve Part No.-8204022225 , Solenoid Val Part No.-8204049897 , Shuttl.Valve Part No.-8204093010 , Check Valve Part No.-8204094034 , O-Ring Part No.-8231085345 , O-Ring Part No.-8231085346 , Breat.Filter Part No.-8231085419 , Manometer Part No.-8231085484 , Cover Compl. Part No.-8231085823 , Suct.Filter Part No.-8231108252 , Press. Switch Part No.-8231108575 , Protec.Cover Part No.-8231108609 , Pressure Fil Part No.-5580108475 , O-Ring Part No.-8231109094 , Cover Part No.-8231109095 , Solenoid Part No.-8231112751 , Valve Part No.-8231112787 , Pr.Rel.Valve Part No.-8231120035 , Check Valve Part No.-8231120286 , Piston Part No.-8231120291 , Overc.Valve Part No.-8231120307 , Valve Part No.-8231120363 , Seal Kit Part No.-8231120653 , Sealing Set Part No.-8231120679 , Sealing Set Part No.-8231120698 , Overc.Valve Part No.-8231120686 , Seal Kit Part No.-8231120689 , Seal Kit Part No.-8231120698 , Sealing Set Part No.-8231130590 , Overc.Valve Part No.-8231600386 , Overc.Valve Part No.-8231600387 , Hyd.Cylinder Part No.-8232110067 , Hydr. Cylinder Part No.-8232300135 , Hyd. Cylinde Part No.-8232300140 , G.Pr.Valve Part No.-8234020037 , Pr.Contr.Valve Part No.-8234020080 , Sequen.Valve Part No.-8234890588 , Pressure Switch Part No.-8440261053 , Conn.Plate Part No.-8440304138 , Plate Part No.-8915002014 , Prohibition Lab Part No.-8915002021 , Warnings Decal Part No.-8915002091 , Info Sign Part No.-8915002092 , Information Lab Part No.-8915002093 , Mandatory Actio Part No.-8915002141 , Information Lab Part No.-8915002152 , Mandatory Actio Part No.-8915002164 , Information Lab Part No.-8915002172 , Information Lab Part No.-8915002192 , Information Lab Part No.-8915002202 , Information Lab Part No.-8915002222 , Information Lab Part No.-8915002232 , Information Lab Part No.-8915002242 , Information Lab Part No.-8915002272 , Mandatory Actio Part No.-8915002303 , Prohibition Lab Part No.-8915002371 , Instructionsign Part No.-8915002413 , Mandatory Actio Part No.-8915002503 , Information Lab Part No.-8915002522 , Information Lab Part No.-8915002552 , Information Lab Part No.-8915002573 , Information Lab Part No.-8915002612 , Info Sign Part No.-8915002682 , Info Sign Part No.-8915002692 , Info Sign Part No.-8915002702 , Instructionsign Part No.-8915002713 , Instructionsign Part No.-8915002723 , Info Sign Part No.-8915002792 , Info Sign Part No.-8915002842 , Slangnippel Part No.-9000024600 , Claw Coupling Part No.-9000030200 , Slangnippel Part No.-9000032600 , Luftslang Part No.-9030010000 , Air Hose Part No.-9030030000 , Air Hose Part No.-9030040000 , Air Hose Part No.-9030050000 , Air Hose Part No.-9030060000 , Air Hose Part No.-9030070000 , Press.Gauge Part No.-9090023900 , Silencer Part No.-9090050700 , Silencer Part No.-9090050800 , Pressure Gauge Part No.-9090117200 , Connection Part No.-9090142300 , Manometer Part No.-9090165700 , Manometer Part No.-9090205200 , Assembly Set Part No.-9093007621 , Stay Part No.-9106000209 , Flange Part No.-9106001054 , Gasket Part No.-9106001057 , Hoods Complet Part No.-9106001084 , Roof Part No.-9106001090 , Roof Part No.-9106001094 , Rubber Cloth Part No.-9106001099 , Drivers Chair Part No.-9106001106 , Screw Part No.-9106001285 , Protection Roof Part No.-9106001320 , Washer Part No.-9106001411 , Shaft Part No.-9106001412 , Pin Part No.-9106001448 , Cover Part No.-9106001489 , Shaft Part No.-9106001541 , Stay Part No.-9106001549 , Exhaust Pipe Part No.-9106001552 , Exhaust Attm. Part No.-9106001553 , Outlet Part No.-9106001555 , Inlet Part No.-9106001556 , Door Part No.-9106001574 , Door Part No.-9106001575 , Rubber Cloth Part No.-9106001576 , Clamp Part No.-9106001749 , Lock Sheet Part No.-9106002052 , Rubber Cloth Part No.-9106002053 , Mudguard Part No.-9106002101 , Mudguard Part No.-9106002102 , Fuel Tank Part No.-9106002111 , Suct.-Return P. Part No.-9106002127 , Swing Arm Part No.-9106002130 , Fuel Hose Part No.-9106002139 , Fuel Hose Part No.-9106002140 , Fuel Hose Part No.-9106002141 , Grate Part No.-9106002143 , Rubber Cloth Part No.-9106002144 , Mudguard Part No.-9106002195 , Mudguard Part No.-9106002196 , Frame Compl. Part No.-9106002225 , Roller Part No.-9106002229 , Shaft Part No.-9106002230 , Plate Part No.-9106002233 , Plate Part No.-9106002234 , Plate Part No.-9106002244 , Rubber Cloth Part No.-9106002282 , Rubber Cloth Part No.-9106002285 , Rubber Cloth Part No.-9106002289 , Hatch Part No.-9106002291 , Hatch Part No.-9106002292 , Lock Part No.-9106002296 , Cover Part No.-9106002298 , Cylinder Part No.-9106003016 , Shaft Part No.-9106003040 , Valve Part No.-9106007556 , Floor Carpet Part No.-9106011127 , Compressor U Part No.-9106011172 , Floor Carpet Part No.-9106011184 , Cover Part No.-9106011251 , Cover Part No.-9106011252 , Cover Part No.-9106011255 , Cover Part No.-9106011256 , Cover Part No.-9106011257 , Gasket Part No.-9106011365 , Gasket Part No.-9106011366 , Gasket Part No.-9106011367 , Gasket Part No.-9106011368 , Swing Arm Co Part No.-9106011370 , Panel Plate Part No.-9106011397 , Waist Pin Part No.-9106011412 , Lamp Attachment Part No.-9106011471 , Battery Box Part No.-9106011523 , Clamp Part No.-9106011529 , Exhaust Hose Part No.-9106011557 , Glidbricka Part No.-9106011958 , Cover Part No.-9106011959 , Guard Holder Part No.-9106012071 , Valve Block Part No.-3217896820 , Double Ch.Valve Part No.-9106063010 , Check Valve Part No.-9106063011 , Overcent.Val Part No.-9106063012 , Over Cent.Va Part No.-9106063013 , Solenoid Valve Part No.-9106063014 , Cartridge Part No.-9106063123 , Seal Kit Part No.-9106063124 , Protect. Cap Part No.-9106064955 , Pr.Rel.Valve Part No.-9106065200 , Pr.Rel.Valve Part No.-9106065201 , Sealing Set Part No.-9106065203 , Suct.Connec. Part No.-9106065873 , Overcent. Va Part No.-9106066600 , Overcent.Val Part No.-9106066601 , Power Supply Part No.-9106071301 , Power Unit Part No.-9106071302 , Power Unit Part No.-9106071304 , Battery Charger Part No.-9106071305 , Suction Hose Part No.-9106077090 , Limit Switch Part No.-9106077102 , Hyd.Cylinder Part No.-9106077228 , L.Switch Kit Part No.-9106077417 , Lock Sheet Part No.-9106077424 , Attachment Part No.-9106077425 , Oil Cooler Part No.-9106077491 , Oil Cooler Part No.-9106077580 , Oil Cooler Part No.-9106077581 , Backventil Part No.-9106083301 , Check Valve Part No.-9106083301 , Hyd.Cylinder Part No.-9106087568 , Check Valve Part No.-9106090706 , Nozzle Part No.-9106090707 , Signal Cable Part No.-9106095302 , Signal Cable Part No.-9106095303 , Signal Cable Part No.-9106095701 , Funnel Part No.-9106101410 , Shaft Part No.-9106101411 , Gasket Part No.-9106101412 , Flap Part No.-9106101413 , House Part No.-9106101414 , Sleeve Part No.-9106101415 , Cap Nut Part No.-9106101416 , Pipe Connection Part No.-9106101419 , Hose Connection Part No.-9106101420 , Torque Key Part No.-9106101540 , Torque Key Part No.-9106101541 , Ir Thermomet Part No.-9106101542 , Protection Roof Part No.-9106106939 , Läs Instr.Bok Part No.-9106107100 , Läs Instr.Bok Part No.-9106107101 , No Admittance Part No.-9106107102 , No Admittance Part No.-9106107103 , Dekal Part No.-9106107106 , Vattenintag Part No.-9106107107 , Water Inlet Part No.-9106107108 , Svetsinstrukt. Part No.-9106107111 , Batterifr.Skilj Part No.-9106107112 , Dekal Part No.-9106107113 , Plc Cabinet Part No.-9106107114 , Bränsle Part No.-9106107115 , Engine Oil Part No.-9106107126 , Lubricating Oil Part No.-9106107127 , Engine Stop Part No.-9106107130 , Plate Part No.-9106107131 , Plate Part No.-9106107132 , Lubr. Oil Tank Part No.-9106107146 , Plate Part No.-9106107193 , Laser Radiation Part No.-9106107220 , Laser Radiation Part No.-9106107221 , Electric. Shock Part No.-9106107300 , Electric. Shock Part No.-9106107301 , Electric. Shock Part No.-9106107302 , Risk Of Crush. Part No.-9106107304 , Risk Of Crush. Part No.-9106107305 , High Sound Lev. Part No.-9106107306 , Tipping Haz. Tr Part No.-9106107309 , Tipping Haz. Dr Part No.-9106107311 , Falling Boom Part No.-9106107313 , Moving Parts Part No.-9106107314 , Moving Parts Part No.-9106107315 , Klämrisk Part No.-9106107316 , Fallande Bom Part No.-9106107317 , Tipp. Haz. Down Part No.-9106107321 , Tipping Haz. Dr Part No.-9106107326 , Laser Radiation Part No.-9106107426 , Laser Radiation Part No.-9106107427 , Insert Part No.-9106107771 , Collect. Block Part No.-9106107776 , Dir. Valve Part No.-9106107791 , Direktion Va Part No.-9106107795 , Samlingsbloc Part No.-9106107799 , Relief Cartr Part No.-9106107822 , Seal Kit Part No.-9106107831 , Valve Block Part No.-9106107832 , Valve Block Part No.-9106107840 , Seal Kit Part No.-9106107841 , Valve Part No.-9106107843 , Seal Kit Part No.-9106107844 , Housing Part No.-9106107908 , Motor Part No.-9106108005 , Pump Part No.-9106108006 , Repair Set Part No.-9106108007 , Repair Set Part No.-9106108012 , Electric Motor Part No.-9106108901 , El.Motor Part No.-9106108903 , El.Motor Part No.-9106109010 , El. Motor Part No.-9106109012 , El.Motor Part No.-9106109030 , Spir.Hose Co Part No.-9106110453 , Handle Part No.-9106112050 , Huvudbrytare Part No.-9106112500 , Brytare Part No.-9106112510 , Overload Relay Part No.-9106112511 , Protection Part No.-9106112512 , Block Part No.-9106112513 , Coil Part No.-9106112515 , Palm Grip Part No.-9106112516 , Contact Breaker Part No.-9106112520 , Trigger Part No.-9106112521 , Main Switch Part No.-9106112550 , Termiska Reläer Part No.-9106112942 , Contactor Part No.-9106115702 , Contactor Part No.-9106115705 , Contactor Part No.-9106115761 , Contactor Part No.-9106115762 , Assembly Set Part No.-9106116010 , Electr.Cabinet Part No.-9106116202 , Hasp Part No.-9106116500 , Hasp Part No.-9106116501 , Attachment Part No.-9106116502 , Shaft Part No.-9106116503 , Arm Part No.-9106116504 , Attachment Part No.-9106116505 , Attachment Part No.-9106116506 , Gasket Part No.-9106118977 , Gasket Part No.-9106118978 , Transformer Part No.-9106119452 , Frame Set Part No.-9106119466 , Strap Part No.-9106120861 , Shim Part No.-9106121509 , Spacer Part No.-9106121513 , Stop Lug Part No.-9106121514 , Sleeve Part No.-9106121515 , Electric Set Part No.-9106122362 , Connecting Pipe Part No.-9106126409 , Lamp Protection Part No.-9106127234 , Shaft Coupl. Part No.-9106127319 , Interm.Ring Part No.-9106127598 , Shaft Part No.-9106127959 , Compress.Spr Part No.-9106127964 , Control Part No.-9106127968 , Shaft Part No.-9106128511 , El. Cabinet Part No.-9106128631 , Cabinet Part No.-9106128640 , Door Part No.-9106128641 , Door Part No.-9106128642 , Beröringsskydd Part No.-9106128644 , List Part No.-9106128647 , Monteringsplåt Part No.-9106128663 , Monteringsplåt Part No.-9106128664 , Electr.Cabinet Part No.-9106128761 , Busbar Module Part No.-9106128840 , Electr.Cabinet Part No.-9106128961 , Protection R Part No.-9106129211 , Valve Block Part No.-9106129811 , Seal Kit Part No.-9106130507 , Solenoid Part No.-9106130509 , Cabinet Part No.-9106130901 , Cabinet Part No.-9106130902 , Cabinet Door Part No.-9106130903 , Cabinet Door Part No.-9106130904 , Cabinet Door Part No.-9106130905 , Electr.Cabinet Part No.-9106130912 , Reservdelssats Part No.-9106131200 , Main Relief Part No.-9106131301 , Seal Kit Part No.-9106131700 , Restr.Washer Part No.-9106131800 , Seal Kit Part No.-9106131900 , Address Plug Part No.-9106132430 , Termination Part No.-9106132438 , Main Cable Part No.-9106132446 , Signal Cable Part No.-9106132464 , Signal Cable Part No.-9106132465 , Signal Cable Part No.-9106132467 , Signal Cable Part No.-9106132486 , Address Plug Part No.-9106132490 , Hyd.Cyl Part No.-9106132502 , Shaft Part No.-9106132510 , Sealing Set Part No.-9106133100 , Repair Kit Part No.-9106133101 , Relief Valve Part No.-9106134102 , Collector Part No.-9106135106 , Key-Board Part No.-9106135463 , Key-Board Part No.-9106135466 , Plate Part No.-9106135468 , Cabel Lug Set Part No.-9106137115 , Wire Mesh Hose Part No.-9106137195 , Cover Part No.-9106141851 , Cover Part No.-9106141852 , Lever Part No.-9106142645 , Signal Cable Part No.-9106142671 , Plate Part No.-9106142741 , Dir.Valve Part No.-9106143720 , Water Pump S Part No.-9106143791 , Sprocket Whe Part No.-9106143803 , Attachment Part No.-9106143826 , Kit Part No.-9106143880 , Fan Set Part No.-9106144402 , Transformer Part No.-9106144448 , Cu-Rail Part No.-9106144666 , Signal Cable Part No.-9106144711 , Signal Cable Part No.-9106144721 , Cover Part No.-9106144740 , Pc-Card Empt Part No.-9106145203 , Can-Cable Part No.-9106147507 , Signal Cable Part No.-9106147516 , Signal Cable Part No.-9106147518 , Signal Cable Part No.-9106147547 , Signal Cable Part No.-9106147548 , Signal Cable Part No.-9106147563 , Sensor Cable Part No.-9106147583 , Sequence Val Part No.-9106149202 , Seal Kit Part No.-9106149204 , Seal Kit Part No.-9106149205 , Spare Part K Part No.-9106149323 , Bushing Part No.-9106149390 , Slide Bar Part No.-9106149394 , Clamp Part No.-9106149541 , Gangad Stang Part No.-9106149549 , Sensor Part No.-9106152428 , Sensor Part No.-9106152436 , Level Sensor Part No.-9106152446 , Seal Ring Part No.-9106153700 , Hose Reel Part No.-9106154090 , Sp.Parts Set Part No.-9106154831 , Sp.Parts Set Part No.-9106154832 , Service Kit Part No.-9106154833 , Termostat Part No.-9106157029 , Fish Joint Part No.-9106157987 , Signal Cable Part No.-9106159321 , Signal Cable Part No.-9106159323 , Signal Cable Part No.-9106159324 , Signal Cable Part No.-9106159390 , Signal Cable Part No.-9106159391 , Signal Cable Part No.-9106159661 , Valve Block Part No.-9106160722 , Check Valve Part No.-9106160727 , Sequence Val Part No.-9106160728 , Restriction Part No.-9106160729 , Valve Block Part No.-9106160730 , Overcentre C Part No.-9106160738 , Needle Valve Part No.-9106160739 , Double Check Part No.-9106160740 , Sequence Val Part No.-9106160741 , Seal Kit Part No.-9106160742 , Seal Kit Part No.-9106160743 , Seal Kit Part No.-9106160744 , Overcentre C Part No.-9106160778 , Valve Part No.-9106160787 , Solenoid Val Part No.-9106160798 , Valve Part No.-9106160799 , Press.Rel.Va Part No.-9106160898 , Seal Kit Part No.-9106161159 , Coupl. Housi Part No.-9106161217 , Flange Part No.-9106161218 , Riktningsven Part No.-9106161285 , Hydraulic Mo Part No.-9106161319 , Housing Part No.-9106161600 , Housing Part No.-9106161606 , Oil Cooler Part No.-9106161861 , Oil Cooler Part No.-9106161862 , Fuse Box Part No.-9106163616 , Signal Cable Part No.-9106163876 , Valve Block Part No.-9106165201 , Hydraulic Mo Part No.-9106165202 , Hydraulcylin Part No.-9106167474 , Main Cable Part No.-9106167794 , Sensor Cable Part No.-9106167795 , Signal Cable Part No.-9106250423 , Valve Block Part No.-9106168903 , Level Glass Part No.-9106169048 , Resolver Part No.-9106169609 , Rocker Part No.-9106169679 , Shaft Part No.-9106169993 , Shaft Part No.-9106170401 , Timing Belt Part No.-9106170403 , Cartridge Pi Part No.-9106170414 , Hyd.Motor Part No.-9106170418 , Cartridge Pi Part No.-9106170420 , Wheel Part No.-9106170424 , Wheel Part No.-9106170433 , Pulley Wheel Part No.-9106170440 , Sleeve Part No.-9106170521 , Switch Part No.-9106170538 , Signal Cable Part No.-9106170754 , Filler Pipe Part No.-9106171538 , Holder Part No.-9106171549 , Direction Va Part No.-9106172100 , Signal Cable Part No.-9106172501 , Signal Cable Part No.-9106172502 , Signal Cable Part No.-9106172504 , Signal Cable Part No.-9106172576 , Signal Cable Part No.-9106172591 , Valve Part No.-9106174300 , Overcent.Val Part No.-9106174638 , Load Holding Part No.-9106174656 , Valve Insert Part No.-9106174660 , Overcent.Val Part No.-9106174662 , Valve Block Part No.-9106174800 , Flange Part No.-9106175202 , Flange Part No.-9106175207 , Flange Part No.-9106175231 , Shaft Coupli Part No.-9106175534 , Flange Beari Part No.-9106175535 , Seal Retaine Part No.-9106175536 , Vibrator Part No.-9106175541 , Gasket Part No.-9106175549 , Roller Part No.-9106175574 , Valve Sectio Part No.-9106175700 , Valve Sectio Part No.-9106175701 , Shaft Part No.-9106176416 , Hyd.Cylinder Part No.-9106176424 , Hydr. Cylind Part No.-9106176435 , Hydr. Cylind Part No.-9106176437 , Hydr. Cylind Part No.-9106176438 , Hydr. Cylind Part No.-9106176439 , Shaft Part No.-9106176651 , Sensor Part No.-9106177511 , Temperature Part No.-9106177518 , Direction Va Part No.-9106178200 , Coupling Part No.-9106178408 , Damping Bush Part No.-9106178411 , Plate Part No.-9106178415 , Plate Part No.-9106178416 , Plate Part No.-9106178417 , Plate Part No.-9106178418 , Spacer Part No.-9106178419 , Spacer Part No.-9106178420 , Spacer Part No.-9106178423 , Spacer Part No.-9106178424 , Protection S Part No.-9106178427 , Damping Bush Part No.-9106178433 , Gripklo Part No.-9106178443 , Spacer Part No.-9106178446 , Turn.Device Part No.-9106178447 , Cylinder Part No.-9106178454 , Press.Releas Part No.-9106178716 , Holder Part No.-9106179220 , Expanding Sh Part No.-9106179409 , Expanding Sh Part No.-9106179446 , Expanding Sh Part No.-9106179465 , Bolt Part No.-9106179467 , Expanding Sh Part No.-9106179468 , Plain Bearin Part No.-9106179470 , Bolt Part No.-9106179471 , Expanding Sh Part No.-9106179472 , Link Arm Part No.-9106179481 , Link Arm Part No.-9106179482 , Expanding Sh Part No.-9106179484 , Exp.Shaft Part No.-9106179485 , Washer Part No.-9106179487 , Plain Bearin Part No.-9106179493 , Seal Kit Part No.-9106179541 , Bearing Kit Part No.-9106179569 , Valve Part No.-9106179582 , Bushing Part No.-9106179613 , Wedge Lock Part No.-9106179622 , Set Complete Part No.-9106180214 , Flange Part No.-9106180396 , Cover Plug Part No.-9106180477 , Cover Plug Part No.-9106180480 , Hydr. Cylind Part No.-9106180643 , Hydr. Cylind Part No.-9106180644 , Shaft Part No.-9106180646 , Shaft Part No.-9106180651 , Shaft Part No.-9106180652 , Locking Clip Part No.-9106180679 , Boom Panel Part No.-9106181103 , Overcent.Val Part No.-9106181322 , Bearing Part No.-9106181370 , Bearing Ring Part No.-9106181371 , Bearing Part No.-9106181372 , Pin Part No.-9106181374 , Washer Part No.-9106181375 , Pin Part No.-9106181377 , Bearing Bush Part No.-9106181381 , Bearing Bush Part No.-9106181390 , Bearing Bush Part No.-9106181395 , Pin Part No.-9106181397 , Pin Part No.-9106181398 , Pin Part No.-9106181399 , Slide Plate Part No.-9106181511 , Slide Plate Part No.-9106181512 , Pin Part No.-9106181514 , Pin Part No.-9106181516 , Bearing Bush Part No.-9106181517 , Lever Part No.-9106181518 , Distance Was Part No.-9106181519 , Stop Part No.-9106181522 , Stop Part No.-9106181523 , Stop Part No.-9106181530 , Glidplatta Part No.-9106181536 , Slideplate Part No.-9106181539 , Slide Plate Part No.-9106181542 , Stod Part No.-9106181544 , Washer Part No.-9106181545 , Cylinder Part No.-9106181547 , Guide Part No.-9106181548 , Support Part No.-9106181549 , Spring Part No.-9106181550 , Slide Plate Part No.-9106181552 , Slide Plate Part No.-9106181555 , Nut Part No.-9106181556 , Seal Kit Part No.-9106181560 , Cylinder Part No.-9106181563 , Bearing Bush Part No.-9106181578 , Rack Part No.-9106181582 , Piston Part No.-9106181584 , Piston Rod S Part No.-9106181585 , Washer Part No.-9106181590 , Tube Part No.-9106181592 , Glidplatta Part No.-9106181595 , Attachment Part No.-9106181629 , Locking Devi Part No.-9106181639 , Cover Female Part No.-9106181904 , Roller Part No.-9106182224 , Roller Part No.-9106182226 , Shaft Part No.-9106182235 , Guide Part No.-9106182237 , Flange Part No.-9106182242 , Hub Part No.-9106182243 , Flange Part No.-9106182295 , Hub Part No.-9106182297 , Attachment Part No.-9106182303 , Protection G Part No.-9106182312 , Rubber Prote Part No.-9106182388 , Piston Seal Part No.-9106182548 , Control Box Part No.-9106182564 , Termination Part No.-9106182834 , Power Supply Part No.-9106183709 , Signal Cable Part No.-9106183723 , Flow Meter Part No.-9106972172 , Signal Cable Part No.-9106183798 , Shaft Part No.-9106183936 , Sleeve Part No.-9106183996 , Hose Holder Part No.-9106184450 , Protect. Shi Part No.-9106184506 , Konsol Part No.-9106184585 , Fender Part No.-9106184655 , Valve Part No.-9106184716 , Shuttle Valv Part No.-9106184722 , Valve Part No.-9106184728 , Attachment Part No.-9106185051 , Spacer Sleev Part No.-9106185069 , Sleeve Part No.-9106185078 , Ladder Part No.-9106185130 , Sleeve Part No.-9106185219 , Spacer Sleev Part No.-9106185228 , Drive Unit Part No.-9106185254 , Bearing Plat Part No.-9106185283 , Bearing Plat Part No.-9106185284 , Bearing Plat Part No.-9106185285 , Spigot Part No.-9106185304 , Spacer Sleev Part No.-9106185315 , Sealing List Part No.-9106185343 , Bushing Part No.-9106185348 , Attachment Part No.-9106185412 , Axel Part No.-9106185414 , Cylinder Com Part No.-9106185442 , Scraper Part No.-9106185443 , Sleeve Part No.-9106185445 , Scraper Part No.-9106185449 , Drive Wheel Part No.-9106185466 , Driver Part No.-9106185474 , Spigot Part No.-9106185479 , Suction Hous Part No.-9106185482 , Hydraulic Cy Part No.-9106185484 , Hydraul Cyli Part No.-9106185486 , Shaft Part No.-9106185491 , Shaft Part No.-9106185492 , Hydraulic Mo Part No.-9106185561 , Swiwel Part No.-9106185564 , Temp. Sensor Part No.-9106185602 , Sensor Part No.-9106971859 , Flow Meter Part No.-9106185604 , Press.Transd Part No.-9106185606 , Rotation Uni Part No.-9106185616 , Scraper Blad Part No.-9106185619 , Sleeve Part No.-9106185634 , Seal Part No.-9106185640 , Valve Part No.-9106185645 , Scraper Blad Part No.-9106185647 , Plate Profil Part No.-9106185648 , Plate Profil Part No.-9106185649 , Seal Kit Part No.-9106185670 , Gear Wheel Part No.-9106185801 , Sleeve Part No.-9106185813 , Floor Carpet Part No.-9106186081 , Seal Kit Part No.-9106186449 , Bearing Set Part No.-9106186450 , Rcs3 Service Part No.-9106186701 , Protect. Shi Part No.-9106186938 , Protect. Shi Part No.-9106186939 , Support Part No.-9106186947 , Tube Part No.-9106186999 , Guide Strip Part No.-9106187504 , Piston Seal Part No.-9106187506 , Back Up Ring Part No.-9106187508 , Styrning Part No.-9106187512 , Kolv Part No.-9106187514 , Ring Part No.-9106187515 , Gavel Part No.-9106187516 , Sleeve Part No.-9106187523 , Seal Part No.-9106187525 , Shaft Part No.-9106187526 , Hydraulic Cy Part No.-9106187541 , Seal Kit Part No.-9106187547 , Wear Slide Part No.-9106187568 , Seal Part No.-9106187574 , Piston Part No.-9106187579 , Holder Part No.-9106187580 , House Part No.-9106187581 , House Part No.-9106187582 , Holder Part No.-9106187583 , Ring Part No.-9106187585 , Lock Ring Part No.-9106187586 , Intermed. Pa Part No.-9106187588 , Cylinder Part No.-9106187590 , Stopp Part No.-9106187593 , Ring Part No.-9106187596 , Switch Part No.-9106187614 , Sealing Part No.-9106187615 , Cylinder Part No.-9106187616 , Signal Cable Part No.-9106187916 , Signal Cable Part No.-9106187934 , Signal Cable Part No.-9106187937 , Signal Cable Part No.-9106187960 , Flow Meter Part No.-9106187961 , Piston Rod Part No.-9106188001 , Sealing Set Part No.-9106188008 , Compressor Part No.-9106188708 , Damping Elem Part No.-9106188709 , Gasket Part No.-9106188773 , Level Switch Part No.-9106188781 , Plate Part No.-9106188788 , Decoder Part No.-9106189016 , Decoder Part No.-9106189080 , Can-Open Cable Part No.-9106189824 , Signal Cable Part No.-9106189830 , Harness Part No.-9106189915 , Battery Charger Part No.-9106974874 , Sensor Part No.-9106190236 , Shaft Part No.-9106190656 , Hydr.Cylinde Part No.-9106190739 , Shaft Part No.-9106190744 , Shaft Part No.-9106190751 , Protection G Part No.-9106190780 , Spray Nozzle Part No.-9106190908 , Hydr. Cylind Part No.-9106190927 , Hydr. Cylind Part No.-9106190928 , Expanding Sh Part No.-9106190938 , Washer Part No.-9106190940 , Washer Part No.-9106190950 , Seal Kit Part No.-9106190953 , Rulle Part No.-9106191106 , Hose Feeder Part No.-9106191130 , Shaft Part No.-9106191135 , Tension Scre Part No.-9106191170 , Drive Roller Part No.-9106191173 , Stromfors.Sa Part No.-9106191866 , Display Patr Part No.-9106191922 , Lock Sheet Part No.-9106192174 , Sliding Piec Part No.-9106192211 , Sliding Piec Part No.-9106192212 , Seal Kit Part No.-9106192401 , Flange Beari Part No.-9106192459 , Attachment Part No.-9106192475 , Battery Support Part No.-9106193330 , I/O-Modul Part No.-9106193350 , Potentiomete Part No.-9106193365 , Shrinking Tub. Part No.-9106193455 , Dowel Part No.-9106193720 , Shaft Part No.-9106193831 , Pedal Part No.-9106194505 , Nipple Part No.-9106196000 , Hose Guide Part No.-9106202106 , Protection Part No.-9106202152 , Flange Part No.-9106202154 , Cylinder Part No.-9106202224 , Cylinder Part No.-9106202229 , Cylinder Part No.-9106202230 , Cylinder Part No.-9106202231 , Sequence Val Part No.-9106202234 , Motor Part No.-9106202255 , Seal Kit Part No.-9106202263 , Friction Pla Part No.-9106202270 , Friction Pla Part No.-9106202273 , Friction Pla Part No.-9106202274 , Seal Kit Part No.-9106202295 , Hydr. Cylind Part No.-9106202314 , Resolvermodu Part No.-9106972370 , Display Part No.-9106206556 , Fuse Box Part No.-9106206575 , Load Cell Part No.-9106206645 , Terminaton Part No.-9106206678 , Linear Senso Part No.-9106206698 , Plastic Shee Part No.-9106213642 , Silencer Part No.-9106215931 , Attachment Part No.-9106215947 , Exhaust Hose Part No.-9106215950 , Battery Charger Part No.-9106217350 , Cover Part No.-9106219007 , Guide Rail Part No.-9106219008 , Shaft Part No.-9106219011 , Pin Part No.-9106219016 , Roller Part No.-9106219017 , Attachment Part No.-9106219018 , Attachment Part No.-9106219019 , Hydr. Cylind Part No.-9106219022 , Attachment Part No.-9106219084 , Glare Shield Part No.-9106219086 , Remote Contr Part No.-9106219089 , Press. Switc Part No.-9106219201 , Press. Switc Part No.-9106219202 , Sensor Part No.-9106219215 , Sensor / Lin Part No.-9106219216 , Linear Senso Part No.-9106219217 , Kretskort Part No.-9106219602 , Kretskort Part No.-9106219603 , Level Sensor Part No.-9106219985 , Hoods Complet Part No.-9106220224 , Hoods Complet Part No.-9106220230 , Hatch Part No.-9106220276 , Rubber Cloth Part No.-9106220282 , Hatch Part No.-9106220283 , Kontaktdon Part No.-9106220634 , Cable Complete Part No.-9106220778 , Key Ring Part No.-9106220823 , Spring Set Part No.-9106221001 , Plate Part No.-9106221002 , Plate Part No.-9106221003 , Roller Set Part No.-9106221007 , Hose Guide Part No.-9106221008 , Clip Part No.-9106221009 , Plate Part No.-9106221011 , Washer Part No.-9106221013 , Plate Part No.-9106221016 , Plate Part No.-9106221017 , Motor Bracket Part No.-9106221020 , Drive Wheel Part No.-9106221022 , Link Screw Part No.-9106221034 , Attachment Part No.-9106221038 , Hose Coupling Part No.-9106221064 , Sleeve Part No.-9106221098 , Yoke Part No.-9106221100 , Guide Part No.-9106221106 , Guide Part No.-9106221107 , Cylinder Part No.-9106221108 , Guide Part No.-9106221113 , Piston Rod Part No.-9106221118 , Shaft Part No.-9106221122 , Drill Holder Part No.-9106221124 , Axle Assy. Part No.-9106221159 , Pin Part No.-9106221163 , Attachm. Plate Part No.-9106221205 , Hose Guide Part No.-9106221249 , Hydraulic Motor Part No.-9106221250 , Drive Wheel Part No.-9106221269 , Protection Part No.-9106221283 , Plate Part No.-9106221286 , Attachment Part No.-9106221288 , Attachment Part No.-9106221289 , Hose Guide Part No.-9106221290 , Modul Part No.-9106221436 , Signal Cable Part No.-9106221910 , Signal Cable Part No.-9106221911 , Signal Cable Part No.-9106221932 , Signal Cable Part No.-9106221962 , Cable Ladder Part No.-9106222807 , Cable Ladder Part No.-9106222809 , Rubber Gaske Part No.-9106222848 , Segment Part No.-9106223601 , Verktyg Part No.-9106224117 , Rcs4 Service Part No.-9106224180 , Handle Part No.-9106224270 , Flange Part No.-9106224489 , Cable Ladder Part No.-9106225108 , Level Sensor Part No.-9106229231 , Flat Bar Part No.-9106229700 , Plate Part No.-9106230758 , Level Sensor Part No.-9106152444 , Remote Contr Part No.-9106232452 , Shaft Comple Part No.-9106232500 , Bushing Part No.-9106232502 , Bushing Part No.-9106232503 , Nut Part No.-9106232504 , Washer Part No.-9106232506 , Attachment Part No.-9106233623 , Protection Part No.-9106234010 , Guide Tube Part No.-9106234803 , Hose Feeder Part No.-9106234852 , Stop Part No.-9106236100 , Damper Part No.-9106237556 , Control Box Part No.-9106240460 , Sequence Val Part No.-9106240601 , Protection B Part No.-9106241834 , Sensor Part No.-9106241901 , Level Sensor Part No.-9106241996 , Attachment Part No.-9106242036 , Lock Cover Part No.-9106242037 , Hydr. Cylind Part No.-9106242089 , Friction Pla Part No.-9106244270 , Hydr. Cylind Part No.-9106244275 , Bearing Set Part No.-9106246441 , Motor Bracket Part No.-9106320743 , Spacer Part No.-9106887045 , Cable Complete Part No.-9106970428 , Sensor Part No.-9106971864 , Decoder Modu Part No.-9106979770 , Electronic Unit Part No.-9106976288 , Attachment Part No.-9110350012 , Cover Part No.-9110350020 , Plate Part No.-9110350021 , Support Part No.-9110350030 , Attachment Part No.-9110350031 , Gas Spring Part No.-9110350039 , Protection Part No.-9110350041 , Shaft Lock Part No.-9110475600 , Attachment Part No.-9110673100 , Protection R Part No.-9110673501 , Shaft Part No.-9110675300 , Steering Part No.-9110743780 , Sealing Set Part No.-9110766505 , Filler Pump Part No.-9110766580 , Shaft Part No.-9110776200 , Bricka Part No.-9110806004 , Nippel Part No.-9110832400 , Nipple Part No.-9110832401 , Step Part No.-9110833600 , Shaft Part No.-9110854904 , Jack Part No.-9110855100 , End Piece Part No.-9110859502 , Attachment Part No.-9110861500 , Gauge Set Part No.-9110861510 , Gauge Set Part No.-9110861520 , Gauge Set Part No.-9110861530 , Floor Part No.-9110863003 , Hatch Part No.-9110877200 , Stringer Part No.-9110881801 , Rubber Protec Part No.-9110889230 , Gasket Part No.-9110892412 , Suct.Connect Part No.-9110892430 , Axelkoppling Part No.-9110894000 , Axelkoppling Part No.-9110894002 , Shaft Coupli Part No.-9110894004 , Lock Ring Part No.-9110895700 , Clutch Case Part No.-9110896900 , Clutch Case Part No.-9110896905 , Coupl.Set Part No.-9110896912 , Bricka Part No.-9110899900 , Ring Part No.-9110908029 , Filler Set Part No.-9110909602 , Sealing Flange Part No.-9110919806 , Thermostat Part No.-9110919980 , Stair Side Part No.-9110930817 , Pin Part No.-9110931600 , Spacer Ring Part No.-9110939000 , House Part No.-9110939100 , Spacer Tube Part No.-9110947166 , Coupl.Half Part No.-9110948401 , Valve Cone Part No.-9110948925 , Valve Seat Part No.-9110948927 , Cover Part No.-9110948956 , Holder Part No.-9110948974 , Attachment S Part No.-9110948999 , Spring Part No.-9110952410 , Spring Part No.-9110952417 , Piano Wire Part No.-9110952439 , Gasket Part No.-9110952443 , Rocker Part No.-9110952448 , Spacer Dia 2 Part No.-9110952449 , Hydralic Blo Part No.-9110953707 , Double Ch.Va Part No.-9110953712 , Press Red.Va Part No.-9110953716 , Press.Red Va Part No.-9110953717 , Dir. Valve Part No.-9110953719 , Seal Kit Part No.-9110953720 , Seal Kit Part No.-9110953721 , Seal Kit Part No.-9110953722 , Seal Kit Part No.-9110953724 , Locking Part No.-9110955500 , Catch Part No.-9110955502 , Compr Spring Part No.-9110955512 , Cable Steering Part No.-9110956000 , Clutch Case Part No.-9110967200 , Coupl. Housi Part No.-9110967202 , Hose Holder Part No.-9110974875 , Binder Box Part No.-9110976023 , Mellanlägg Part No.-9110984902 , Mellanlägg Part No.-9110984903 , Direction Va Part No.-9110989507 , Signal Cable Part No.-9110996868 , Main Cable Part No.-9110996875 , Can-Cable Part No.-9110998421 , Signal Cable Part No.-9110998442 , Attachment Part No.-9110998650 , Flashing Beacon Part No.-9110999464 , Valve Part No.-9110999624 , Valve Part No.-9110999643 , Check Valve Part No.-9110999664 , Seal Set Part No.-9110999684 , Seal Set Part No.-9110999685 , Seal Set Part No.-9110999688 , Seal Set Part No.-9110999690 , Cartridge Part No.-9110999693 , Coil Part No.-9110999694 , Cable Gear Part No.-9111002030 , Kabeldon Part No.-9111002033 , Shaft Lock Part No.-9111078300 , Shaft Part No.-9111192200 , Shaft Part No.-9111192300 , Support Part No.-9111250200 , Cover Part No.-9111250701 , Water Pump Part No.-9111269900 , Sealing Set Part No.-9111269901 , Sealing Set Part No.-9111269902 , Sealing Set Part No.-9111269903 , Sleeve Part No.-9111269923 , Slide Part No.-9111269938 , Extender Part No.-9111282610 , Spacer Tube Part No.-9111308357 , Shaft Part No.-9111323107 , Hydr.Kit Part No.-9111346900 , Attachment Part No.-9111353014 , Hose Holder Part No.-9111362245 , Interm.Plate Part No.-9111367431 , Control Pane Part No.-9111370308 , Plate Part No.-9111370348 , Poten.Meter Part No.-9111370350 , Housing Part No.-9111370720 , Cover Part No.-9111370730 , Cover Part No.-9111370732 , Bushing Part No.-9111370750 , Attachment Part No.-9111371435 , Relä Part No.-9111373410 , Relay Part No.-9111373411 , Tran.Protec. Part No.-9111373430 , Transient Prot. Part No.-9111373431 , Trans.Prot Part No.-9111373432 , Transient Prot. Part No.-9111373435 , Shaft Part No.-9111374407 , Cart Complet Part No.-9111374800 , Wheel,Compl. Part No.-9111374830 , Check Valve Part No.-9111375100 , Check Valve Part No.-9111375101 , Potent.Meter Part No.-9111375600 , Gasket Part No.-9111376021 , End Support Part No.-9111376702 , End Plate Part No.-9111376703 , Earth Thermi Part No.-9111376709 , Plinth Part No.-9111376744 , Flow Regul. Part No.-9111377001 , Pr.Rel.Valve Part No.-9111377002 , Check Valve Part No.-9111377003 , Pr.Regulator Part No.-9111377004 , Sealing Set Part No.-9111377011 , Check Valve Part No.-9111382103 , Direct.Valve Part No.-9111384700 , Swivel Part No.-9111385400 , Cable,12-Core Part No.-9111389109 , Cable, 5-Core Part No.-9111389110 , Cable, 7-Core Part No.-9111389113 , Cable,25-Core Part No.-9111389119 , Cable, 3-Core Part No.-9111389143 , Cable, 2-Core Part No.-9111389159 , Cable, 1-Core Part No.-9111389180 , Cable, 1-Core Part No.-9111389187 , Cable, 2-Core Part No.-9111389199 , Cable, 5-Core Part No.-9111389264 , Repair Set Part No.-9111393100 , Shaft Coupli Part No.-9111394000 , Shaft Coupli Part No.-9111394008 , Kuggkrans Part No.-9111394011 , Hose Fender Part No.-9111394740 , Water Pump Part No.-9111394920 , Roller Path Part No.-9111399820 , Shaft Part No.-9111400913 , Shaft Part No.-9111401034 , Flat Iron Part No.-9111401720 , Plate Part No.-9111401740 , Attachment Part No.-9111401793 , Turning Device Part No.-9111401802 , Hydr.Cylinde Part No.-9111401960 , Cylinder Part No.-9111401961 , Shaft Part No.-9111401967 , Shaft Part No.-9111401968 , Shaft Part No.-9111401970 , Shaft Part No.-9111401971 , Shaft Part No.-9111401972 , Shaft Part No.-9111401973 , Spacer Part No.-9111401974 , Shaft Part No.-9111401984 , Attachment Part No.-9111402002 , Seal Part No.-9111402003 , Attachment Part No.-9111402004 , Hyd. Cylinde Part No.-9111402044 , Protection Part No.-9111402080 , Protection Part No.-9111402081 , Cart Complet Part No.-9111403250 , Attachment Part No.-9111404122 , Hydr. Cylind Part No.-9111404192 , Hydr. Cylind Part No.-9111404198 , Shaft Part No.-9111404826 , Shaft Part No.-9111404827 , Gasket Part No.-9111404852 , Gasket Part No.-9111404853 , Attachment Part No.-9111404926 , Control Arm Part No.-9111404929 , Control Devi Part No.-9111404930 , Bushing Part No.-9111404937 , Drain Unit Part No.-9111404991 , Seal Kit Part No.-9111404992 , Spacer Part No.-9111405802 , Hydr. Cylind Part No.-9111406131 , Hydr. Cylind Part No.-9111406133 , Strainer Part No.-9111406174 , Strainer Part No.-9111406178 , Strainer Part No.-9111406179 , Spare Parts Set Part No.-9111406193 , Spare Parts Set Part No.-9111406194 , Protection Part No.-9111406229 , Protection P Part No.-9111406359 , Protection Part No.-9111406801 , Valve Set Part No.-9111406830 , Valve Set Part No.-9111406831 , Spare Parts Part No.-9111406832 , Check Valve Part No.-9111408530 , Cover Part No.-9111408810 , Sealing List Part No.-9111408830 , Link Arm Part No.-9111408850 , Pipe Couplin Part No.-9111409516 , Shaft Part No.-9111409517 , Front Part No.-9111410420 , Guide Part No.-9111410422 , Seal Kit Part No.-9111410500 , Oil Filter S Part No.-9111410956 , End Piece Part No.-9111411528 , Protection Part No.-9111412812 , Protecter Part No.-9111413100 , Cap Part No.-9111413101 , Seal Part No.-9111413109 , Hydraulic Pi Part No.-9111414433 , Hydraulic Pi Part No.-9111414435 , Hydraulic Pi Part No.-9111414437 , Hydraulic Pi Part No.-9111414439 , Hydraulic Pi Part No.-9111414441 , Hydraulic Pi Part No.-9111414443 , Hydraulic Pi Part No.-9111414447 , Hydraulic Pi Part No.-9111414449 , Hydraulic Pi Part No.-9111414451 , Hydraulic Pi Part No.-9111414453 , Hydraulic Pi Part No.-9111414455 , Hydraulic Pi Part No.-9111414457 , Hydraulic Pi Part No.-9111414459 , Hydraulic Pi Part No.-9111414461 , Hydraulic Pi Part No.-9111414463 , Hydraulic Pi Part No.-9111414465 , Hydraulic Pi Part No.-9111414467 , Hydraulic Pi Part No.-9111414469 , Shut Off Vav Part No.-9111414509 , Plastic Sheet Part No.-9111416971 , Stinger Part No.-9111432612 , Swivel Part No.-9111500165 , Press.Rel.Va Part No.-9120029202 , Press.Rel.Va Part No.-9120029203 , Press.Rel.Va Part No.-9120029206 , Press.Rel.Va Part No.-9120029260 , Pr.Rel.Valve Part No.-9120029263 , Relief Cartr Part No.-9120029908 , Valve Part No.-9120029917 , Lever Set Part No.-9120059052 , Control Lever Part No.-9120059053 , Setting Screw Part No.-9120069051 , Seal Kit Part No.-9120079007 , Plunger P.Set Part No.-9120079008 , Lever Joint Part No.-9120079013 , Dragstångssats Part No.-9120079021 , Pr.Rel.Valve Part No.-9120079065 , Lever Joint Part No.-9120089302 , Tie Rod Kit Part No.-9120089304 , Lever Guide Part No.-9120089307 , Mounting Plate Part No.-9120089308 , Plug Set Part No.-9120089328 , Lever Set Part No.-9120089363 , Lever Set Part No.-9120089367 , Bolt Set Part No.-9120089391 , Bolt Set Part No.-9120089392 , Lever Part No.-9120089513 , Pawl Set Part No.-9120089614 , Spare Parts Part No.-9120089667 , Repair Set Part No.-9120092001 , Spring Set Part No.-9120092015 , Cover Part No.-9120092016 , Cover Part No.-9120092018 , Valve Part No.-9120092030 , Sealing Set Part No.-9120092036 , Sealing Set Part No.-9120092038 , Valve Sect. Part No.-9120092041 , Seal Kit Part No.-9120092315 , Valve Part No.-9120092353 , Seal Kit Part No.-9120092355 , Tie Rod Kit Part No.-9120092562 , Sealing Set Part No.-9120099005 , Sealing Set Part No.-9120099006 , Sealing Set Part No.-9120099007 , Seal Kit Part No.-9120099008 , Packningssats Part No.-9120099009 , Seal Kit Part No.-9120099010 , Sealing Set Part No.-9120099011 , Sealing Set Part No.-9120099012 , Packningssats Part No.-9120099014 , Sealing Set Part No.-9120099018 , Repair Kit Part No.-9120099020 , Sealing Set Part No.-9120099301 , Seal Kit Part No.-9120099302 , Seal Kit Part No.-9120099303 , Seal Kit Part No.-9120099304 , Sealing Set Part No.-9120099305 , Seal Kit Part No.-9120099306 , Sealing Set Part No.-9120099308 , Seal Kit Part No.-9120099309 , Sealing Set Part No.-9120099310 , Sealing Set Part No.-9120099312 , Sealing Set Part No.-9120099313 , Seal Kit Part No.-9120099314 , Seal Kit Part No.-9120099316 , Seal Kit Part No.-9120099401 , Sealing Set Part No.-9120099612 , Pr.Rel.Valve Part No.-9120099964 , Anslutn.Nippel Part No.-9121550008 , Sealing Set Part No.-9121571950 , Hyd.Cylinder Part No.-9121591301 , Hyd.Cylinder Part No.-9121591302 , Hydr. Cylind Part No.-9121591305 , Hydr. Cylind Part No.-9121591306 , Hyd.Cylinder Part No.-9121598701 , Hyd.Cylinder Part No.-9121598702 , Sealing Set Part No.-9121598750 , Hyd.Cylinder Part No.-3128259843 , Hydr. Cylinder Part No.-3128321900 , Packningssats Part No.-9121667550 , Sealing Set Part No.-9121667650 , Sealing Set Part No.-9121667750 , Seal Kit Part No.-9121669650 , Sealing Set Part No.-9121685550 , Sealing Set Part No.-9121686050 , Hyd.Cylinder Part No.-9121687201 , Seal Kit Part No.-9121687250 , Hyd.Cylinder Part No.-9121701702 , Seal Kit Part No.-9121701750 , Hyd.Cylinder Part No.-9121701800 , Hyd.Cylinder Part No.-9121703200 , Hyd.Cylinder Part No.-9121703203 , Seal Kit Part No.-9121703204 , Accumulator Part No.-9121703207 , Sealing Part No.-9121703208 , Bushing Part No.-9121703210 , Hyd.Cylinder Part No.-9121704502 , Seal Kit Part No.-9121704550 , Hyd.Cylinder Part No.-9121709302 , Hydr. Cylind Part No.-9121709304 , Hyd.Cylinder Part No.-9121722101 , Sealing Set Part No.-9121730050 , Hand Lever Part No.-9122178015 , Cover Part No.-9122307300 , Sealing Set Part No.-9122351750 , Pist.Rod Eye Part No.-9122363800 , End Cover Part No.-9122365300 , Piston Rod Part No.-9122375000 , Sealing Set Part No.-9122376450 , Cover Part No.-9122383800 , Sealing Set Part No.-9122387750 , Cover Compl. Part No.-9122433250 , Valve Part No.-9122435200 , Hyd.Cylinder Part No.-3128325774 , Sealing Set Part No.-9122438650 , Cover Part No.-9122488000 , Hyd.Cylinder Part No.-9122503800 , Sealing Set Part No.-9122503850 , Sealing Set Part No.-9122551950 , Cover Part No.-9123355200 , Cylinder Cover Part No.-9123355300 , Cover Part No.-9123355400 , Cover Part No.-9123355600 , Cover Part No.-9123355800 , Cover Compl. Part No.-9123650705 , Cover Part No.-9123650711 , Cylinder Cover Part No.-9123650713 , Kolvstång Part No.-9123662400 , Cover Part No.-9123760300 , Rubber Hood Part No.-9123914900 , Knob Part No.-9124254501 , Plate Part No.-9124808100 , Bushing Part No.-9124880800 , Bushing Part No.-9124881000 , Piston Part No.-9124945600 , Bushing Part No.-9124950700 , Piston Part No.-9124956400 , Kolv Part No.-9124956500 , Piston Part No.-9124956600 , Kolv Part No.-9124956700 , Kolv Part No.-9124956800 , Bälg Part No.-9124974600 , O-Ring Part No.-9125605900 , O-Ring Part No.-9125618500 , O-Ring Part No.-9125618600 , O-Ring Part No.-9125619100 , Seal Part No.-9125630000 , Seal Washer Part No.-9125630300 , Seal Washer Part No.-9125664800 , Piston Seal Part No.-9125673900 , O-Ring Part No.-9125687100 , Set Screw Part No.-9125689600 , Set Screw Part No.-9125728900 , Set Screw Part No.-9125729500 , Ball Knob Part No.-0362111000 , Ball Joint Part No.-0501001600 , Lock Ring Part No.-9125960100 , Cable Part No.-9125995700 , Hyd.Cylinder Part No.-9126158000 , Kolvstångsöra Part No.-9126176600 , Pisto Rod Part No.-9126181203 , Fjädersats Part No.-9126181619 , Cover Part No.-9126195600 , Piston Part No.-9126195900 , Kolvstång Part No.-9126201001 , Cover Part No.-9126201100 , Kolv Part No.-9126201200 , Hyd.Cylinder Part No.-9126232200 , Piston Rod Part No.-9126249601 , Cover, Compl Part No.-9126277050 , Piston Rod Part No.-9126277101 , Piston Rod Part No.-9126332602 , Piston Part No.-9126332700 , Kolvstång Part No.-9126333000 , Piston Rod Part No.-9126384000 , Cover Part No.-9126394300 , Cover Part No.-9126394400 , Piston Part No.-9126394800 , Cover Part No.-9126395100 , Cover Part No.-9126395900 , Cover Part No.-9126396000 , Cover Part No.-9126396500 , Cover Part No.-9126424400 , Piston Part No.-9126429300 , Piston Part No.-9126429500 , Piston Rod Part No.-9126430003 , Cover Part No.-9126430200 , Cover Part No.-9126430300 , Pipe Part No.-9126449202 , Cone Part No.-9126457701 , Cone Part No.-9126457702 , Cone Part No.-9126457703 , Cone Part No.-9126457704 , Pipe Part No.-9126461002 , Pipe Part No.-9126461008 , Pipe Part No.-9126461009 , Back-Up Ring Part No.-9126602000 , Cable Clamp Part No.-9126706200 , Sealing Set Part No.-9126900691 , Ring Part No.-9127187200 , Fjäder Part No.-9127215400 , Pipe Part No.-9127229801 , Pipe Part No.-9127229901 , Hålskruv Part No.-9127230000 , Plainbearing Part No.-9127252300 , Plug Part No.-9127319933 , Washer Part No.-9127354770 , Piston Part No.-9128612500 , Press. Plate Part No.-9128696200 , Slid Part No.-9128699800 , Kolv Part No.-9128707600 , Bushing Part No.-9128734200 , Bushing Part No.-9128734300 , Bushing Part No.-9128734400 , Bearing Bushing Part No.-9128734600 , Cone Part No.-9128814900 , Spring Part No.-9128945200 , End Socket Part No.-9139600221 , End Socket Part No.-9139600223 , Flat Pin Sleeve Part No.-9139600456 , Coll.Block Part No.-9236010336 , Solen.Valve Part No.-9236050981 , Hyd.Cylinder Part No.-9236200262 , Shim Part No.-9236200269 , Spacer Part No.-9236200313 , Lock Nut Part No.-9236200315 , Shaft Part No.-9236200320 , Washer Part No.-9236200324 , Supp.Washer Part No.-9236200325 , Bushing Part No.-9236200327 , Sealing Set Part No.-9236200386 , Spacer Ring Part No.-9236200398 , Pist.Rod End Part No.-9236200933 , Pist.Rod End Part No.-9236200934 , Piston Part No.-9236201029 , Cover Part No.-9236201221 , Spindel/Spin Part No.-9236201243 , Sealing Bush Part No.-9236201248 , Valve Part No.-9236201257 , Sealing Set Part No.-9236201628 , Washer Part No.-9236201762 , Sealing Set Part No.-9236201764 , Spacer Part No.-9236202238 , Brake Part No.-9236202242 , Cradle Part No.-9236202732 , Support Plat Part No.-9236202742 , Guide Part No.-9236204528 , Bushing Part No.-9236204736 , Attachment Part No.-9236207528 , Turning Devi Part No.-9495591680 , Mandrel Part No.-9495591700 , Mandrel Part No.-9495591800 , Mandrel Part No.-9495591900 , Mandrel Part No.-9495592000 , Mandrel Part No.-9495592100
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 1
Jharkhand View Result →
42.
Health and Family Welfare #10552298 Price Bid
For The Procurement Of Consumable Items For Cardiology Department ( Part-I ) , Drapes , Femoral Drape Sterile, Disposable Catheterization Drape For Covering Patients During Angiography / Catheterization Procedures. Size 100-120×180-200 Cm, With Two 10-12 Cm Adhesive Fenestrations At The Site Of Femoral Artery Puncture ( In The Junction Of Upper 1 / 3Rd And Lower 2 / 3Rd ) , Having Absorbent As Well As Laminated Reinforcement. , Radial Drape Sterile, Disposable Catheterization Drape For Covering Patients During Radial Angiography. Size 120-140×180-200 Cm, With Single 10-12 Cm Adhesive Fenestration At The Site Of Right Radial Artery Puncture ( In The Right Upper Corner, One Foot Away From The Right And The Upper Border Of The Drape ) , Having Absorbent As Well As Laminated Reinforcement. , Antimicrobial Adhesive Sterile Adhesive Transparent Antimicrobial Incision Drape Completely Impervious To Fluids, Size 30-60 Cm X30-45 Cm , Sheaths , Adult Femoral Introducer Sheath Adult Femoral Introducer Sheath 10-12 Cm Long Withhydrophilic Coating Over The Sheath, Hemostatic Valve To Prevent Back Bleeding And Aspiration Of Air, Integrated Side Arm With Attached 3-Way Stopcock; With Suture Eye For Securing Sheath, Kink Resistant, With Dilator Hub Lock Mechanism To Prevent Its Back-Out During Insertionand, In A Kit Containing 18 G, 6-7.5 Cm Puncture Needle And 0.035” Or 0.038” Guide Wire. Size: 5 / 6 / 7 / 8 / 9 F. , Adult Femoral Introducer Long Sheath Adult Femoral Introducer Sheath 20 – 50 Cm Long Withhydrophilic Coating Over The Sheath; 0.035” Or 0.038” Guide Wire Compatible; Hemostatic Valve To Prevent Back Bleeding And Aspiration Of Air, Integrated Side Arm With Attached 3-Way Stopcock; With Suture Eye For Securing Sheath; Kink Resistant; With Dilator Hub Lock Mechanism To Prevent Its Back-Out During Insertion With Smooth And Resistance Free Insertion. Size: 5 / 6 / 7 / 8 / 9 F. , Adult Femoral Introducer Extra Long Sheath Adult Femoral Introducer Sheath >50 Cm Long Withhydrophilic Coating Over The Sheath; 0.035” Or 0.038” Guide Wire Compatible; Hemostatic Valve To Prevent Back Bleeding And Aspiration Of Air, Integrated Side Arm With Attached 3-Way Stopcock; With Suture Eye For Securing Sheath; Kink Resistant; With Dilator Hub Lock Mechanism To Prevent Its Back-Out During Insertion With Smooth And Resistance Free Insertion. Size: 5 / 6 / 7 / 8 / 9 / 10 / 11F And =12F , Adult Femoral Introducer Sheath – Large Bore Adult Femoral Introducer Sheath 10-12 Cm Long With Hydrophilic Coating Over The Sheath, 0.035” Or 0.038” Guide Wire Compatible, Hemostatic Valve To Prevent Back Bleeding And Aspiration Of Air, Integrated Side Arm With Attached 3-Way Stopcock; With Suture Eye For Securing Sheath, Kink Resistant, With Dilator Hub Lock Mechanism To Prevent Its Back-Out During Insertion With Smooth And Resistance Free Insertion. Size: 9 To =12F. , Adult Femoral Introducer Sheath – Long Large Bore Adult Femoral Introducer Sheath 20- 50 Cm Long With Hydrophilic Coating Over The Sheath, 0.035” Or 0.038” Guide Wire Compatible, Hemostatic Valve To Prevent Back Bleeding And Aspiration Of Air, Integrated Side Arm With Attached 3-Way Stopcock; With Suture Eye For Securing Sheath, Kink Resistant, With Dilator Hub Lock Mechanism To Prevent Its Back-Out During Insertion With Smooth And Resistance Free Insertion. Size: 9 To =12F , Pediatric Femoral Introducer Sheath Pediatric Femoral Introducer Sheath With Hemostatic Valve In A Kit Containing Puncture Needle And 0.018-0.021” J Tip / Straight Tip Guide Wire. Size: 3F / 4F / 5F / 6F. , Radial / Brachial Introducer Sheath Radial / Brachial Introducer Sheath With Hemostatic Valve To Prevent Back Bleeding And Aspiration Of Air, Integrated Side Arm With Attached 3-Way Stopcock In A Kit Containing 3-5 Cm Puncture Needle 21 G And 0.021” 40-50 Cm Length Mini Guide Wire ( J Tip / Straight Tip ) , 7-11 Cm Long Sheath. Size: 4F / 5F / 6F / 7F. , Long Radial Introducer Cannulation Kit Radial Artery Cannulation Kit Comprising Of Arterial Sheath With Hemostatic Valve, Puncture Needle 21 G, Straight Tip 0.021”-0.025” 70-80 Cm Length Mini Guide Wire, 16-25 Cm Long Sheath. Size: 4F / 5F / 6F / 7F. , Special Transradial Artery Cannulation Kit Radial Artery Cannulation Kit Comprising Of Hydrophilic Coated Arterial Sheath With Hemostatic Valve, Puncture Needle 20-22 G, Non-Metallic Hydrophilic Straight Tip Mini Guide Wire Of 0.021”-0.025”, Sheath Length Between 10-25 Cm. Size: 4F / 5F / 6F / 7F. , Transradial Sheathless Access System Transradial Sheathless Access System. It Should Include Single Or Dual Long Dilators 135 Cm Each; Hydrophilic Coating; 0.021”-0.035” Wire Compatible; Should Contain Hydrophilic Nitinol / Non Hydrophilic Mini Guidewire ( 45 Cm ) . Dilators Should Be Compatible With Other Brands Guiding Catheter. Size: 5F, 6F, 6.5F, 7F, 7.5 F , Manifold , Manifold – Two Port Manifold –Two Ports With Knobs To Turn “Right” When Open. , Manifold – Three Port Manifold –Three Ports With Knobs To Turn “Right” When Open. , Ptca Kit , Ptca Kit Ptca Kit Containing – ( I ) Three Port Manifold With Knobs To Turn “Right” When Open ( Ii ) One Pressure Line ( Iii ) Saline Connecting Line ( Iv ) Contrast Connectingline ( V ) One Three Way Stop Cock ( Vi ) Short Tube Of 12 To 15 Inches To Connect To Touhy Borst, ( Vii ) One Y-Connector Hemostatic Valve With Spring Type Push And Release Lock Mechanism ( Viii ) One Inflation Device With Manometer Upto 30 Atmosphere ( Easy To Operate With Luminescent Dial ) , ( Ix ) One Luer Lock Controlled Syringe Of 10 Ml With Three Finger Ring, ( X ) Introducer Needle, ( Xi ) Torque Device. , Y-Connector Hemostatic Valve Tuohy Borst Adapter With Dual Valve, Spring Type Push And Release As Well As Rotatory Mechanism. It Should Have Bleed Back Control Valve And Without Formation Of Micro / Macro Air Bubbles Inside It During The Procedure. , Y-Connector Hemostatic Valve Tuohy Borst Adapter With Dual Valve, Spring Type Push And Release.It Should Have Bleed Back Control Valve And Without Formation Of Micro / Macro Air Bubbles Inside It During The Procedure. , Y-Connector Hemostatic Valve Tuohy Borst Adapter With Dual Valve, Rotatory Mechanism.It Should Have Bleed Back Control Valve And Without Formation Of Micro / Macro Air Bubbles Inside It During The Procedure. , Ptca Needle Ptca Insertion Needle Accepting 0.014”, 0.018” And 0.035” Guide Wires. , Inflation Device Inflation Device With Manometer Of 0 To =30 Atmosphere, 30 Cc Capacity And Luminescent Dial Face.Easy To Operate With Ergonomic Design. High Strength Syringe To Maintain High Pressure Setting Without Pressure Loss And Immediate Pressure Release. , Contrast Luerlock Syringe Contrast / Saline Injecting Syringe For Angiography ( For Multiple Hand Contrast Injection In A Single Patient, Non-Breakable ) . A ) 2 Cc, With Luer Lock, No Finger Grip. B ) 5 Cc, With Luer Lock, No Finger Grip. C ) 10 Cc, With Luer Lock, No Finger Grip. , Puncture Needle 21G Sterile Puncture Needle Of 21 Gauge, About 5 Cm Long, Permitting Insertion Of 0.021” Guide Wire, With Plastic Jacket Covering The Needle Part. , Puncture Needle 18G Sterile Puncture Needle Of 18 Gauge, 7 Cm Long, Permitting Insertion Of 0.035” / 0.038” Guide Wire, With Plastic Jacket Covering The Needle Part. , Torque Device Torque Device Accepting Wires ( 0.014”, 0.018”, 0.035”, 0.038” ) , Micropuncture Introducer Set For Vascular Access In Adults Micropuncture Introducer Set For Vascular Access In Adults ( Needle, Guidewire And Co-Axial Introducer Sheath With Dilator And Side Arm ) . It Should Include 20-22 G 6- 7.5 Cm Long Puncture Needle With Protective Plastic Tube Covering; 0.018 Inch, 40-50 Cm Long Guidewire; 4-5 F 10-11 Cm Long Coaxial Introducer Sheath. , Micropuncture Introducer Set For Vascular Access In Paediatrics Micropuncture Introducer Set For Vascular Access In Paediatrics ( Needle, Guidewire And Co-Axial Introducer Sheath ) . It Should Include 20-22 G 3- 5 Cm Long Puncture Needle With Protective Plastic Tube Covering; 0.018 Inchguidewire; 4-5 F Long Coaxial Introducer Sheath. , Three Way Stop Cock , Three Way Stop Cock With One Male And Two Female Ports And Freely Rotating Adapter For Coronary Angiography. , Pressure And Injector Lines , Pressure Line Pressure Line: 120-150 Cm, 4-6 Mm, Compatible With Manifold And Three Way Ports. , Pressure Line Short Connecting Pressure Line Of 20-30 Cm With Male Port In One Side And Female Port In The Other Side. , Injector Line High Pressure Injector Line To Withstand Pressure Up To 1200Psi, 75-100 Cm Length With Luer Lock Male Port And Rotator. , Injector Syringe Injector Syringe Compatible With Medred , Connecting Line Dual Male Connecting Line , Coronary Angiogram Diagnostic Catheters , Femoral Coronary Angiography Diagnostic Catheters Coronary Angiography Diagnostic Catheters =100 Cm For Femoral Approach And Various Curves ( Wherever Applicable ) Of 3.0, 3.5, 4.0, 5.0 F As Required From Time To Time. A ) Judkins Left 4F / 5F / 6F B ) Judkins Right 4F / 5F / 6F C ) Amplatz Left ( Ali / Alii / Aliii ) 4F / 5F / 6F D ) Amplatz Right ( Ari / Arii ) 4F / 5F / 6F E ) L.I.M.A. Catheter 4F / 5F / 6F F ) R.I.M.A Catheter 4F / 5F / 6F G ) Multipurpose Ai, Ii 4F / 5F / 6F H ) Multipurpose Bi, Ii 4F / 5F / 6F I ) 3Drc ( Williams Catheter, 5.2 F ) , Femoral Coronary Angiography Diagnostic Catheters Coronary Angiography Diagnostic Catheters =125 Cm Long For Femoral Approach And Various Curves ( Wherever Applicable ) Of 3.0, 3.5, 4.0, 5.0 As Required From Time To Time. A ) Judkins Left 4F / 5F / 6F B ) Judkins Right 4F / 5F / 6F C ) Amplatz Left ( Ali / Alii / Aliii ) 4F / 5F / 6F D ) Amplatz Right ( Ari / Arii ) 4F / 5F / 6F E ) Multipurpose ( Ai, Ii ) 4F / 5F / 6F , Radial Diagnostic Angiography Catheter Radial Diagnostic Angiography Catheter, Single Catheter For Both Left And Right Coronary Angiography, Tiger Like Curve, Having A-Traumatic Tip With End And Side Hole, Large Lumen. 100-110 Cm Long, 5F. , Radial Diagnostic Angiography Catheter Radial Diagnostic Angiography Catheter, Single Catheter For Both Left And Right Coronary Angiography, Multipurpose A Like Curve With Primary Curve Of 130±5 Degrees, Having A-Traumatic Tip, Large Lumen. 100-110 Cm Long, 5F. , Radial Diagnostic Angiography Catheter Radial Diagnostic Coronary Angiography Catheters, Single Catheter For Cannulation Of Both The Coronary Arteries. With And Without Side Hole, Available In 4, 5, And 6 F, 100 Cm Long And Available In Different Curve Length Of 3.5 To 4.5 Cm. , Radial Diagnostic Angiography Catheter Radial Diagnostic Coronary Angiography Catheters, Single Catheter For Cannulation Of Both The Right And Left Coronary Arteries, Trapease Like, Ultracurve Like Or Similar Shapes, With And Without Side Hole. 5F, And 6F, 100-110 Cm Long. , Ptca Guiding Catheters , Ptca Guiding Catheter, 100 Cm Long: It Should Be Large Lumen ( Minimum Of 0.070” Inner Lumen In 6F And =0.080” In 7F ) , Stainless Steel Braided. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A ) Judkins Left Without Side Holes ( Curves 3, 3.5, 4, 5 Cm ) , Size 5F / 6F / 7F / 8F. B ) Judkins Right Without Side Holes ( Curves 3, 3.5, 4, 5 Cm ) , Size 5F / 6F / 7F / 8F. C ) Judkins Right With Side Holes ( Curves 3, 3.5, 4, 5 Cm ) , Size 5F / 6F / 7F / 8F. D ) Ima Guiding Catheter, Size 5F / 6F / 7F. E ) Multipurpose ( Ai, Aii ) , Size 5F / 6F / 7F / 8F. F ) Multipurpose ( Bi, Bii ) , 5F / 6F / 7F / 8F. G ) Amplatz Left ( Curves Al0.75, Al1, Al1.5, Al2, Al3 ) , 5F / 6F / 7F / 8F. H ) Amplatz Right ( Curves Ar1, Ar2 ) , 5F / 6F / 7F / 8F. I ) Voda Left, 5F / 6F / 7F / 8F. J ) Left Coronary Bypass Guide Catheter, 6F / 7F. K ) Right Coronary Bypass Guide Catheter, 6F / 7F. L ) Extra Back-Up ( Ebu ) Left, 5F / 6F / 7F / 8F. M ) Extra Back-Up ( Ebu ) Right, 5F / 6F / 7F / 8F. N ) 3D Right Guiding Catheter, 6F / 7F. O ) Hockey Stick Guiding Catheter, 6F / 7F. P ) Shepherd Crook Right Type Guiding ( Curves 3.5, 4, 5 ) , 6F / 7F. Q ) Head Hunter Guiding Catheter, 6F / 7F. , Ptca Guiding Catheter, 110 Cm Long: It Should Be Large Lumen ( Minimum Of 0.070” Inner Lumen In 6F And =0.080” In 7F ) , Stainless Steel Braided, Inner Layer Coated With Ptfe. It Should Have Atraumatic Soft Tip With Radio Opaque Marker Band At The Tip. A ) Judkins Left Without Side Holes ( Curves 3, 3.5, 4, 5 Cm ) , Size 5F / 6F / 7F / 8F. B ) Judkins Right Without Side Holes ( Curves 3, 3.5, 4, 5 Cm ) , Size 5F / 6F / 7F / 8F. C ) Judkins Right With Side Holes ( Curves 3, 3.5, 4, 5 Cm ) , Size 5F / 6F / 7F / 8F. D ) Ima Guiding Catheter, 5F / 6F / 7F. E ) Multipurpose ( Ai, Aii ) , 5F / 6F / 7F / 8F. F ) Multipurpose ( Bi, Bii ) , 5F / 6F / 7F / 8F. G ) Amplatz Left ( Curves Al0.75, Al1, Al1.5, Al2, Al3 ) , 5F / 6F / 7F / 8F. H ) Amplatz Right ( Curves Ar1, Ar2 ) , 5F / 6F / 7F / 8F. I ) Voda Left, 5F / 6F / 7F / 8F. J ) Left Coronary Bypass Guide Catheter, 6F / 7F. K ) Right Coronary Bypass Guide Catheter, 6F / 7F. L ) Extra Back-Up ( Ebu ) Left, 5F / 6F / 7F / 8F. M ) Extra Back-Up ( Ebu ) Right, 5F / 6F / 7F / 8F. N ) 3D Right Guiding Catheter, 6F / 7F. O ) Hockey Stick Guiding Catheter, 6F / 7F. , Radial Coronary Angioplasty Guiding Catheters, Single Catheter For Cannulation Of Both The Coronary Arteries. Available In 5, And 6 F, 100 Cm Long And Available In Different Curve Length Of 3.5 To 4 Cm And With The Option Of Having Side Holes. , Radial Guide Catheter, Ikari Left Curve. 3.5, 4, 4.5, 5 Size, 5F / 6F For Radial Angioplasty. , Radial Guide Catheter, Ikari Right Curve. 1.0 / 1.5 / 2.0 / 2.5 Size, 5F / 6F For Radial Angioplasty. , Radial Guide Catheter, Tiger Type Curve. 5F / 6F Size For Radial Angioplasty. , Radial Hydrophilic Sheath-Less Guide Catheter, 7 / 7.5F Size. , Radial Guide Catheter, Mac Curve. 3.0, 3.5, 4 Size, 5F / 6F For Radial Angioplasty. , Angiographic Guide Wire , Angiographic Guide Wire 0.035”, Ptfe Coated, ‘J’ Tip, Standard Length ( 150-160 Cm ) , Angiographic Guide Wire 0.035”, Ptfe Coated, ‘Straight’ Tip, Standard Length ( 150-160 Cm ) , Angiographic Guide Wire, Ptfe Coated, ‘J’ Tip, Extra Length Of ( 250-260 Cm ) . Diameter ( I ) 0.038” ( Ii ) 0.035” ( Iii ) 0.032” ( Iv ) 0.025” ( V ) 0.021” , Radifocus Angiographic Guide Wire ( Terumo ) , Hydrophilic Polymer Coated; J Tip, Standard Length ( 150-180 Cm ) , Diameter ( I ) 0.021” ( Ii ) 0.025 ( Iii ) 0.032” ( Iv ) 0.035” ( V ) 0.038” , Radifocus Angiographic Guide Wire ( Terumo ) , Hydrophilic Polymer Coated; ‘Straight’ Tip, Standard Length ( 150-180 Cm ) , Diameter ( I ) 0.021” ( Ii ) 0.025 ( Iii ) 0.032 ( Iv ) 0.035 ( V ) 0.038” , Radifocus Angiographic Guide Wire ( Terumo ) ; Hydrophilic Polymer Coated; ‘Straight’ Tip, Exchange Length ( 250-260 Cm ) , Diameter ( I ) 0.021” ( Ii ) 0.025 ( Iii ) 0.032 ( Iv ) 0.035 ( V ) 0.038” , Amplatzer Super Stiff Guide Wire, Long Length Of 260 Cm To 300 Cm Of 0.035” Size. , Amplantz Extra Stiff Guide Wire, Long Length Of 260 Cm To 300 Cm Of 0.035” Size.. , Amplantz Ultra Stiffguide Wire, Long Length Of 260 Cm To 300 Cm Of 0.035” Size. , Ptca Guidewire , Stainless Steel Core Workhorse Ptca Guidewire 0.014” With Soft Shaping Ribbon Tip And Hydrophilic Or Hydrophobic Coating, Length 175-190 Cm , Stainless Steel Core Workhorse Ptca Guidewire 0.014” With Medium / Intermediate Support With Soft / Floppy Tip 175 - 190 Cm , Stainless Steel Core Workhorse Ptca Guidewire 0.014” With Extra Support With Soft / Floppy Tip 175-190 Cm , Hybrid Core Workhorse Ptca Guidewire With Soft / Floppy Tip 175-190 Cm , Hybrid Core Workhorse Ptca Guidewire With Medium / Intermediate Support With Soft / Floppy Tip 175 - 190 Cm , Hybrid Core Workhorse Ptca Guidewire With Extra Support With Soft / Floppy Tip 175-190 Cm , Ptca Guide Wires, 0.014”, 180-190 Cm Long, Nitinol Distal Super Elastic Core For Kink Resistance And Shape Retention, Silicon Coating For Distal 2 Cm And Hydrophilic Coating Of Rest Of The Wire Length With Tip Loadof 1.0 Gm., 0.6 Gm., And 3.6 Gm. , Steerable Ptca Guide Wire With Floppy Tip, Elastinite Nitinol Core, Soft Shaping Ribbon Tip And Hydrophilic Or Hydrophobic Coating. , Steerable Ptca Extra Support Guide Wire With Durasteel Core Material, Core To Tip Design, Floppy Tip. With Hydrophobic Coating And With Hydrophilic Coating. , Steerable Ptca 0.014” Guide Wire, Distal Nitinol Core And Rest Stainless Steel, Double Coil Tip For Shape Retention, Hydrophilic Coating. , Ptca Guide Wire With Polymer Coated, Hydrophilic, Steel Core And Transitionless Tip With Various Tip Strength And Tip Load For Torturous Vessels. , Ptca Guide Wire With Ptfe Coating Over Shaft, Polymer Sleeve Length Of 16-20 Cm, Tip Load Of 0.8 Gm., Tip Size Of 0.014”, Tip Radiopacity Of 3 Cm Or More , Ptca Guide Wire With Ptfe Coating Over Shaft, Polymer Sleeve Length Of 16-20 Cm, Tip Load Of 0.8 Gm., Tip Size Of 0.009”, Tip Radiopacity Of 16 Cm. , Ptca Guide Wire 0.014” With Ptfe Coating Over Shaft, Polymer Jacket And Hydrophilic Coating Length Of 17 Cm, Tip Load Of 1.0 Gf, Tapered Tip Size 0.010”, Stainless Steel Spring Coil Of 16 Cm Length And Tip Radiopacity Of 16 Cm, Length 190Cm , Ptca Guide Wire 0.014” With Ptfe Coating Over Shaft, Polymer Jacket And Hydrophilic Coating Length Of 17 Cm, Tip Load Of 0.6 Gf, Tapered Tip Size 0.010”, Stainless Steel Spring Coil Of 16 Cm Length And Tip Radiopacity Of 16 Cm, Length 190 And 300 Cm , Ptca Extra-Support Guide Wire With Ptfe Coating Over Shaft, Tip Load Of 0.7 Gm., Tip Size Of 0.014”, Spring Coil Of 4 Cm And Tip Radiopacity Of 4 Cm. , Ptca Guide Wire For Cto With Ptfe Coating Over Shaft, Tip Size Of 0.014”, Tip Radiopacity Of 11 Cm And Spring Coil Of 11 Cm, Length Of 180-190 Cm. Various Tip Loads ( 3, 4.5, 6, 12 ) , Ptca One Piece Core Wire With Joint Less Spring Coil Length 15 Cm With Cone Tip, 180-190 Cm Long, Tip Radiopacity 15 Cm, Wire Diameter 0.010” With A Tip Load Of 1.7 Gm., Wire Diameter 0.011” With A Tip Load Of 3.5 Gm., And Wire Diameter 0.012” With A Tip Load Of 4.5 Gm. , Ptca Guide Wire For Cto With Extra-Support, Tip Load Of 9 Gm., Tip Size Of 0.009”, Length 180-190 Cm, With Spring Coil And Tip Radiopacity Of 11 Cm And Spring Coil And Tip Radiopacity Of 20 Cm. , Ptca Guide Wire For Cto With Stainless Steel Core, Hydrophilic Tapered Tip With Radiopacity Of 16 – 20 Cm Of Varying Tip Load ( 9-20 Grams ) , Ptca Guide Wire For Septal Collateral Surfing, Joint Less Spring Coil 0.014” One Piece Core Ptca Guide Wire With Tip Radiopacity 3 Cm, Length 180 Cm, Tip Load Of 0.5 Gm. And 0.7 Gm. , Ptca Guide Wire For Epicardial Collateral Surfing, With Hydrophilic Coating, Spring Coil Of 19Cm Length, 0.3 Gf Tip Load, Distal 3 Cm Single Wire Rope Coil, Core Connected To Tip With Twist Wire, 3Cm Tip Radiopacity, Length 190 And 300 Cm , Dedicated Externalization 0.010” Guidewire, 8 Cm Spring Coil Length, 3.0 Gf Tip Load, Tip Radiopacity Of 3 Cm With Length >300 Cm. , 0.014” Extension ( Doc ) Wire Of At Least 165 Cm For Exchange Of Micro Catheters And Other Over The Wire Devices , Ptca Balloon Catheters , Predilatation Semicompliant Balloon Ptca Pre-Dilatation, Monorail / Rapid Exchange Balloon ( Semi Compliant ) . Low Entry Profile ( =0.017” ) And 5F Guide Catheter Compatibility. Radio-Opaque Markers At Both Ends. Diameters ( Mm ) : 1.0, 1.25, 1.5, 2.0, 2.5, 3, 3.5, =4.0. Length: =10 Mm To =30 Mm. ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Predilatation Semicompliant Balloon: Ultralow Entry Profile Ptca Pre-Dilatation Semi-Compliant Balloon, Monorail / Rapid Exchange. Ultra-Low Entry Profile ( =0.016” Inch ) With 5F Guide Catheter Compatible, Hydrophilic Coating Of The Distal Monorail Part. Radio-Opaque Marker For Visibility. Diameters ( Mm ) : 1.0, 1.2 / 1.25, 1.5, 2.0. Length: =10 Mm To =20 Mm. ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered ) , Predilataion Sc Balloon: Ultralow Entry Profile Ptca Pre-Dilatation Semi-Compliant Balloon, Lowest Tip Entry Profile Of =0.016”, Crossing Profile Of =0.021”, Zero Fold Or Minimum Fold With Low Profile And Marker For Better Visibility, Stepwise Transition Stiffening For More Pushability For Difficult To Cross Lesions. Radio-Opaque Marker ( Single ) At The Center Of The Balloon In Small Diameter Balloons. Diameter ( Mm ) : 1.2 / 1.25, 1.5, 2.0. Length: Minimum 6-8 Mm To 12-15 Mm. ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Pre-Dilatation Sc Over The Wire Balloon Ptca Pre-Dilatation Semi-Compliant Over The Wire Balloon ( Otw ) With Short Balloon Taper, Low Entry Profile ( =0.016” ) . Diameter –1.2 / 1.25, 1.5, 2.0, 2.5, 3.0 Mm Or More Length – Minimum 6-8 Mm To 20Mm Or More. , Ptca Predilation Cto Balloon Ptca Pre-Dilatation Non Compliant, Monorail / Rapid Exchange Balloon With Lowest Crossing Profile For Crossing Difficult To Cross Cto Lesions, Having Smallest Balloon Size Of 0.8±0.1 Mm Diameter And Length Of 8±2 Mm. , Post-Dilatation High Pressure Nc Balloon ( Rbp 16 Atm ) High Pressure Non-Compliant Balloon With Low ( <0.018” ) Lesion Entry Profileand =16 Atm Rbp, 5F Guiding Compatible, Smooth, Rounded Distal Tip And No Edge Over-Dilatation At Higher Pressure; With Least Balloon Overhang At The Edges. Available Diameter ( Mm ) : 2.0, 2.5, 2.75, 3.0, 3.5, =4. Length ( Mm ) : =10 To =30. ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Post-Dilatation High Pressure Nc Balloon ( Rbp 20 Atm ) High Pressure Non-Compliant Balloon With =20 Atm Rbp, 5F Guiding Compatible, Smooth, Rounded Distal Tip And No Edge Over-Dilatation At Higher Pressure. Available Diameter ( Mm ) : 2.25, 2.5, 2.75, 3.0, 3.25, 3.5, 3.75, 4, 4.5, 5.0. Length ( Mm ) : Minimum 6 / 8 Mm To =20 Mm. ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Ultra-High Pressure Non-Compliant Balloon Ultra-High Pressure Non-Compliant Balloon With =30 Atm Rbp For Highly Fibrotic Or Calcific Vessels, No Edge Over-Dilatation At Higher Pressure; With Least Balloon Overhang At The Edges. Diameter ( Mm ) : 2.0, 2.5, 3.0, 3.5, =4. Length ( Mm ) : Minimum 6-8Mm To =20 Mm. ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) A ) Balloon Only B ) Balloon With Dedicated Inflation Device To Inflate Balloon Upto 45 / 50 Atm. , Coronary Balloon For Controlled Plaque Modification Scoring Balloon Catheter With Flexible Nitinol Scoring Element In A Helical Fashion / Dual-Wire For Plaque Modification On A Balloon For Coronary Applications, Of Various Lengths And Diameters , Ptca Cutting Balloon Ptca Cutting Balloon With Blades Or Such New Cutting Device At The Surface Of The Balloon, Blades / Cutting Devices Arranged With Hinges In Every 5 Mm Of Balloon For Better Trackability. Diameter 2.0Mm-4.00 Mmlength 6-15 Mm , Cto Balloon For Retrograde Approach Ptca Balloon For Retrograde Approach Of Cto: Should Be Available In Both Regular And Long Lengths For Retrograde Approach, Should Be Available As Over The Wire ( Otw ) , Available In All Sizes And Lengths , Perfusion Balloon Rapid Exchange Low Pressure Atraumatic Microporous Ptfe Balloon Catheter For Local Infusion Of Drugs, Catheter Length > 130 Cm. Size1.5- 4.0Mm , Drug Eluting Coronary Balloons , Deb Coronary Paclitaxel Eluting Balloon Dilation Catheter, 0.014” Wire Compatible, Rapid Exchange. Diameter ( Mm ) 2.0, 2.5, 2.75, 3.0, 3.5, 4.0. Length ( Mm ) 12 / 15 Mm Upto 40 Mm In Various Lengths. , Deb Coronary Sirolimus Eluting Balloon Dilation Catheter, 0.014” Wire Compatible, Rapid Exchange. Diameter ( Mm ) 2.0, 2.5, 2.75, 3.0, 3.5, 4.0. Length ( Mm ) 12 / 15 Mm To=40 Mm In Various Lengths. , Microcatheters , Coronary Microcatheter With Distal Diameter Of 1.9 Fr Or Less, Proximal Diameter 2.6F, Ptfe Coated Inner Layer, And Distal Hydrophilic Coating At The Outer Layer, Flexible Tip With Outer And Inner Taper With Gold Marker At Distal Tip For Enhanced Distal Visibility To Cross Difficult Lesions, From 130-160 Cm Length , Complex Channel Or Micro-Channel Crossing Catheter With Hydrophilic Coating Of Distal Segment, Kink Resistant Tapered Tip Of 0.016”, Tungsten Braiding, +10 Elliptical Stainless Steel Braids For Better Support, From 130-160 Cm Length. , Coronary Wire Braded Micro-Catheter For Channel Dilatation With Platinum Marker At Distal Tip For Clear Visibility. Having 8× 0.12 Mm Wire Embedded In The Shaft, Long Taper Tip Of 15 Cm, Tip 1.7-1.8 Fr., Mid Shaft Of 2.1-2.2 R. And Proximal End Of 3.3-3.4 Fr., Length 130-140 Cm. , Double Lumen Microcatheter Double Lumen Microcatheter With Hydrophilic Coating, Proximal Outer Diameter 2.9F, Tip Entry Diameter < 1.5 F, Radiopaque Markers At Both Exit Port, 0.014” Guidewire Compatibility, 6F Guide Compatibility. Length 135-145Cm , Coronary Microcatheter With Distal Outer Diameter Of 2.7 F And Proximal Outer Diameter Of 2.9 F, With Guidewire Compatibility Of 0.021” For Microcoil Embolization. , Thrombosuction Catheters , Intra-Coronary Thrombus Extraction Catheter, Short Tip Monorail Segment With Removable Stiffening Stylet For Pushability, Hydrophilic Coating, Big And Round Suction Lumen, 0.014” Wire Compatibility – Available In 6F And 7F , Coronary Thrombus Extraction Catheter With Full Length Braided Shaft With Hydrophilic Coating Without Stiffening Stylet – Size 6F , Coronary Thrombus Extraction Catheter With Full Length Braided Shaft With Hydrophilic Coating With Embedded Wire For Enhanced Deliverability And Kink Resistance – Size 6F , Coronary Thrombus Extraction Catheter Compatible With 5 French Guiding Catheter. , Guide Catheter Extension , Guide Extension Catheter, 5F / 5.5 F / 6F / 7F / 8F, Coil-Reinforced Extension, Kink Resistant, Rapid Exchange With 150 Cm Working Length, Soft Tip With Radiopaque Marker. , Guide Extension Catheter, 6F / 7F / 8F, Rapid Exchange, 150 Cm Working Length With Short Hypotube Transition For Reducing Stent Interaction / Deformation And Having Dedicated Catheter For Using In Transradial Pci, Soft Tip With Radiopaque Marker At Both End. , Special Large Lumen Rapid Exchange Guide Extension Catheter Compatible With 6 / 7 / 8 F Guiding Catheter With Ids For 6 F: 0.057 Inch; 7F: 0.063 Inch And 8F: 0.072 Inch; Soft Tip With Radiopaque Marker. All Sizes Should Be Available , Mother And Child Catheter Assembly For Using Smaller Guide Catheter Inside Large Guide Catheter. , Cto Re-Entry Balloon Catheter , Over The Wire, Blunt Microdissection Catheter With 1-Mm Rounded Tip For Antegrade Dissection Re-Entry , Flat Re-Entry Balloon For Cto With Two Exit Port For Wire Entry In To The True Lumen , Penetrating Wire For Antegrade Dissection And Reentry , Vascular Closure Device , Femoral Percutaneous Closure Device ( Thrombin / Collagen Mediated Closure ) . , Femoral Percutaneous Suture Mediated Closure Device For > 8F Closure. , Radial Closure Device Comprising Of Compression Pad ( Pneumatically Inflated With A Syringe ) With Anatomic Soft-Wrist Support Pad. , Temporary Pacing Leads , Balloon-Flow Assisted Bipolar Temporary Pacing Electrode Catheter, Must Have Marking On Catheter, With Depth Marker Sizes-5F / 6F , Bipolar Temporary Pacing Lead, With Central Removable Stellate For Maintaining Support And Tip-Curve. 5F / 6F / 7F. , Calcified Lesion Modification , Rotational Atherectomy Catheter Burr For Rotational Coronary Atherectomy, 1.25- 2.5 Mm With Rotational Atherectomy Catheter Burr With Advancer Rota Burr And Advancer With Floppy / Extrasupport / Drive Rota Guide Wire 0.009 With Tip.014 , Ivl-Rapid Exchange Ballon Intravascular Lithotripsy Intuitive Catheter With Rapid Exchange System For Treating Highly Calcified Lesions, - In Various Sizes And Diameters , Intravascular Lithotripsy Intuitive Catheter With Over The Wire System For Treating Highly Calcified Lesions, - In Various Sizes And Diameters , Intravascular Lithotripsy Connector Cable , Iabp Consumables , Iabp Balloons With Accessories For Insertion, Compatible With The Existing Model Ac3 Optimus – Iabp And Autocat ( Arrow International Inc ) ( With Required Connector ) . Sizes Available In 20, 24 / 25, 30 / 32, 34 / 36, 40 Ml. , Refilling Of Helium Gas Cylinders From Time To Time For The Existing Iabp Machine Of Arrow. , Impella , Impella Pump Catheters With All Accessories For Use, 2.5 Liter Pump , Intracoronary Imaging And Physiology Catheters , Intracoronary Pressure Wire Catheter ( Ffr & Ifr ) For Ptca With Wireless Connectivity Compatible With Philips Ivus Machine In Cath Lab. , Ivus Catheter With Pullback Sledge: High Resolution, Rapid Exchange, Phased Array Ivus Catheter With Operating Frequency 20 Mhz / 64 Element With 5F / 6F Guide Compatibility, 0.014” Guide Wire Compatible, Tip To Transducer Length 2.5 To 10 Mmfor Coronary And Peripheral Intervention Transducer Compatible With Philips Ivus Machine Available In Cath Lab Catheter With Pullback Sledge For Automatic Pullback , Ivus Catheter With Pullback Sledge: High Resolution, Rapid Exchange, Mechanical Ivus Catheter With Operating Frequency 45 Mhz / Single Element With 5F / 6F Guide Compatibility, 0.014” Guide Wire Compatible For Coronary Intervention Transducer Compatible With Philips Ivus Machine In The Cath Lab. Catheter With Pullback Sledge For Automatic Pullback , Embolization Coils / Particles , Embolization Coils Of 0.014” Diameter, Different Lengths , Embolization Coils Of 0.018 Diameter, Different Lengths , Embolization Coils Of 0.021 Diameter, Different Lengths , Embolization Coils Of 0.035 Diameter, Different Lengths , Embolization Coils Of 0.038 Diameter, Different Lengths , Microcoil ( 0.018 Diameter ) Delivery System A ) Coil Delivery Micro Catheter B ) Coil Pusher , Sterile Pva Particle For Intravascular Embolization, 300-1000 ?M Diameter. , Coronary Filter / Protection Devices , Rapid Exchange Coronary Low-Profile Protection Filter Device 2.5-5.0Mm , Distal Protection Device 0.014 Basket Type. , Distal Protection Device .014 Wire Umbrella Type Coronary Filter. , Snare / Retrieval System , Snares: Dual Plane Snare System With Radio-Opaque Loop, Small And Large Loop , Amplatz Goose Neck Snare Kit Of Small And Large Size. , Intra-Coronary Foreign Body Retrieval Forceps , Radio Opaque Micro Snare, Small Loop, 90 Degree With Kink Resistant Shaft. , Intra-Vascular Retriever Set. , Cardiac Bioptomes For Endomyocardial Biopsy. 4F, 5F. 6F. A ) 100+5 Cm For Femoral Approach B ) 45+5 Cm For Internal Jugular Approach. , Peripheral Balloons , Peripheral Long Balloon, Semi Compliant, Various Diameters Of 4 To 24 Mm. Length: 20 To =100 Mm. Otw Over 0.035 Guide Wire. , Peripheral Long Balloon, Semi Compliant, Various Diameters Of 4Mm To =8 Mm. Length: 20 To =100 Mm. Otw Over 0.018 Guide Wire. , Peripheral Balloon, Semi Compliant, Various Diameters Of 4Mm To 8Mm. Length: 20 To 40 Mm. Monorail, Compatible Over 0.014 Guide Wire. , Scoring Balloon Catheter Scoring Balloon Catheter, With Two / Three Rectangular Spiral Sheets / Wires ( Nitinol Scoring Element ) On A Semi-Compliant Balloon For Peripheral Applications. Otw Over 0.014 / 0.018 Guide Wire. Diameter ( Mm ) : 4.0 To 8.0 Mm. Length ( Mm ) : 20 To 100 Mm Working Length: 50 Cm, 90 Cm, 155 Cm ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Peripheral Cutting Balloon Peripheral Cutting Balloon With Blades At The Surface Of The Non-Compliant Balloon, 5.0 To 8.0 Mm Diameter Length Up To 20 Mm. Otw Over 0.018 Guide Wire. Working Length: 50 Cm, 90 Cm, 135 Cm ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Paclitaxel Eluting Peripheral Drug Eluting Balloon Catheter , Sirolimus Eluting Peripheral Drug Eluting Balloon Catheter , Peripheral Guidewires , Steerable Pta 0.035 Guide Wire With Core To Tip Design, Hydrophobic Coating, Soft Atraumatic Tip, Supportive. Lengths: 145 Cm, 190 Cm And 300 Cm , Steerable Pta Guide Wire With Floppy Tip, Scitanium Stainless Steel Alloy Core, Extra-Support Of 0.018 Diameter, =300 Cm Long. Tip Non-Hydrophilic Or Tip Hydrophilic. , Steerable Pta High Support Guide Wire Of 0.018, Body Ptfe / Hydrophobic Coated, Distal Hydrophilic Coating, Distal Radiopacity Of 2 Cm, =300 Cm Long. , Torque Device For Large Wires ( 0.018 To 0.038 ) , Contra-Lateral Femoral Sheath With Dilator, 30-55 Cm Long. 6F, 7F, 8F, 9F, 10F , Carotid Angiography / Angioplasty Catheters , Carotid Angioplasty 90 Cm Sheath With Hydrophilic 20 Coating, Radiopaque Band, Soft Tip. Size: 5 To 9 F , Dedicated Guiding Catheter For Carotid With Flexible Shapable Tip. Size:6, 7, 8 F , Cobra Catheter ( C1, C2, C3 ) : 4 / 5 / 6 F. , Picard Catheter, 5F. , Head Hunter Catheter: 5 / 6 F. , Shepherd Crook Catheter ( 0.8 & 1 ) : 5 / 6 F. , Simmons Catheter, 5 / 6 F, ( Sim1, Sim2 ) , Sidewinder Catheter, 5 / 6 F. , Bernstein Curve Angiography Catheter , Vtk ( Vitek ) Catheter For Carotid Angiography, 125 Cm Long, 5F , Filter Type Rapid Exchange Cerebral Protection Device Compatible With 0.014 Wire, 4-8 Mm Diameter. , Polyurethane Nitinol - Basket Type Rapid Exchange Cerebral Protection Device Compatible With 0.014 Wire, 4-8 Mm Diameter. , Renal Angioplasty Catheters , Guiding Cath With Attached Valve, Renal Double Curve. Size: 6 - 8 F , Guiding Cath With Attached Valve, Multipurpose 55 - 95 Cm. Size: 7-9 F , Guiding Cath With Attached Hemostasis Valve, Contralateral 55- 95 Cm. Size: 7-9 F , Renal Guiding Cath. Length 55Cms / 65Cms. Size: 6, 7, 8F , Ptmc / Pbmv , Mullins Sheath With Side Arm For Adult Procedure Size: 9-14 F. , Mullins Sheath With Side Arm For Pediatric Procedure Size: 4-8 F. , Trans-Septal Puncture Needle, Curved, For Atrial Septal Puncture. For Adult Use. , Trans-Septal Puncture Needle, Straight, For Atrial Septal Puncture. For Adult Use. , Trans-Septal Puncture Needle, Curved, For Atrial Septal Puncture. For Pediatric Use. , Ptmc Accessory - Spring Coil Wire, Extra Stiff, Metallic For Ptmc / Bmv. , Ptmc Accessory - 14 F Dilator For Ptmc / Bmv , Ptmc Accessory - Stylet Or J Shaped Lv Entry Wire During Ptmc / Bmv. , Noodle Wire, 0.035 Diameter, 300 Cm Long. , Mitral Valvuloplasty Double Lumen Ptmc Balloon With Vent Tube And Hole In The Outer Layer Of The Balloon, Different Sizes, Without Accessories. , Ptmc Double Lumen Balloon With No Hole On The Balloon Wall, No Vent Tube, Different Sizes, Without Accessories. , Mitral Valvuloplasty Double Lumen Ptmc Balloon With Vent Tube And Hole In The Outer Layer Of The Balloon, Different Sizes, With All Accessories. , Ptmc Double Lumen Balloon With No Hole On The Balloon Wall, No Vent Tube, Different Sizes, With All Accessories. , Bpv , Percutaneous Pulmonary Valvuloplasty Balloon Catheters Of Different Sizes; Available In Sets Containing Balloon Catheter, Dilator, Guide Wire, Caliper With Technology For Stable Position Of Balloon Across Pulmonary Valve During Dilatation. , Bav , Percutaneous Aortic Valvuloplasty Balloon Catheters Of Different Sizes; Available In Sets Containing Balloon Catheter, Dilator, Guide Wire, Caliper With Technology For Stable Position Of Balloon Across Aortic Valve During Dilatation. , Percutaneous Valvuloplasty Balloon Catheter For Adult Use, Of Different Sizes Available Upto 30Mm And Length Upto 60Mm, With Higher Rbp ( 3-6 Atm ) , Percutaneous Valvuloplasty Balloon Catheter For Adult Use With Dumbbell Shaped Narrowing Of The Central Part For Precise Positioning Across A Valve, Of Different Diameter Of Mid-Size Available Upto 25 / 26 Mm And Length Upto 40 / 50 Mm, With Higher Rbp ( 3-5 Atm ) . , Nucleus Dilatation Balloon With Three Markers, Initial Expansion Of Ends And Later Expansion Of Central Part. , Coarctoplasty , Percutaneous Transluminal Dilation Balloon With Markers For Coarctation Of Aorta With High Rbp. All Sizes And Various Lengths. , Ultra-High Pressure Valvuloplasty Balloon Dilation Catheter With Multiple Markers. , Percutaneous Valvuloplasty Bib ( Balloon-In-Balloon ) Balloon Catheter Of Different Length And Diameter. , Atrial Septostomy Catheter , Atrial Septostomy Catheter Dual Lumen Shaft, Radio Opaque Catheter Body, Marker In The Balloon For Balloon Positioning, 30-45° Angulated Tip. Over The Wire. , Fogarty Catheter For Atrial Septostomy, 5F- 6F , Asd / Vsd / Device Delivery System , Asd / Vsd / Pda Delivery System Kit Containing I ) Delivery Sheath -Flex Kink Resistant With Back Bleed Prevention Hemostatic Valve And Side Port, Ii ) Dilator, Iii ) Delivery Cable, Iv ) Loader 6 / 7 / 8 / 9 / 10 / 11 / 12 / 13 / 14F. , Sizing Balloon For Asd Device Closure: Oval Shaped , Sizing Balloon For Asd Device Closure: Circular Shape , Sizing Plate For Balloon Sizing Of Asd , Cardiac Catheterization Catheters , Balloon Flotation Angiography Catheter ( Berman Type ) With Side Holes. 5F, 6F, 7F. , Balloon Flotation Angiography Catheter ( Berman Type ) With Side Holes And End Hole At The Tip For Wire Access. 5F, 6F, 7F. , Pigtail Catheter For Neonatal And Pediatric Use, Short Length Of 70-80 Cm: 4F, 5F. , Pigtail Catheter, 6-12 Side Holes, High Flow Rate For Adult Use. Straight Pigtail: 4, 5, 6 , 7 F. , Pigtail Catheter, 6-12 Side Holes, High Flow Rate For Adult Use. Marker Pigtail ( With Radio Opaque Markers ) : 6, 7 F. , Pigtail Catheter, 6-12 Side Holes, High Flow Rate Foradult Use. Angled Pigtail ( With 145-155 Degree Angle ) : 5, 6 F. , Nih Catheter, With End Hole And Side Holes, 5 / 6 F. , Nih Catheter, With Side Holes Only, 5 / 6 F. , Single Lumen Balloon Flotation Wedge Pressure Catheter ( Swan Ganz Type ) With End Hole. 4F, 5F, 6F. 7F. , Goodale-Lubin Catheter, 4F / 5F / 6F. , Multi Track Angiography Catheter For Angiography While Catheter Is Over The Wire By Short Monorail Part At Distal Tip, Size 5-7 F. , Angiographic Vessel Sizing Catheters Of Various Configuration, Non-Braided, 6-10 Side Holes, 0.035 Wire Compatible, With 10-20 Radiopaque Marker Bands 1 Cm Apart, Length Between 65 - 100 Cm, Size: 4 / 5 / 6 F , Specialized Sheaths , Steerable Long Sheath With Hemostatic Valve And Deflectable Tip, 6F To 14 F, Length 50Cm, 70 Cm And =80 Cm. , Bidirectional, Steerable Soft-Tip Design, Guiding Sheath With Small And Large Curve And Variable Reach, Auto Lock ( Between 8-12F ) , Total Length =90 Cm. , Special Braided Long Sheaths With Side Arm: Other Than Mullins Curve: All Standard Sizes And Curve , Long Sheaths Of Various Sizes With Side Arm ( Balkan / Hausdorff Type ) , For Pediatric Interventions. 4F, 5F, 6F. 30 To 50 Cm Long. , Long Sheaths Of Various Sizes With Side Arm ( Balkan / Hausdorff Type ) , For Adult Interventions. 6F, 7F, 8F. 60 To 80 Cm Long. , Shuttle Sheath, With Flexor Tuohy Borst Side Arm, 60 Cm Long, 6F, 7F, 8F, 9F. , Shuttle Sheath, With Flexor Tuohy Borst Side Arm, 80 Cm Long, 6F, 7F, 8F, 9F. , Pealway Introducer Sheath, 0.035 Compatible, 6F / 7F / 8F / 9F , Lv Wires , 0.035 Stiff Guide Wire With Ptfe Coated Stainless Steel Core, Tapering Gradually To The Tip; With A Pre-Shaped Curve Of Diameter 30Mm At The End. The Wire Should Have An Smooth Transition Phase From Stiff To Soft That Commences At The Start Of The Curvature. 260 Cm Length , 0.035 Extra Stiff Ptfe-Coated Stainless Steel Guide Wire, Should Have 4 -7 Cm Of Flexible Tip, Should Have Enhanced Visibility. Lengths Of = 260 Cm , 0.035” Ptfe-Coated Stainless Steel Guide Wire. Smooth Tapered Core Design, Pre-Shaped Curve At The End Where The Curve Performs At Least One Revolution Or Loop With A Decreasing Radius. Curve Size: Extra Small, Small And Large. Length = 260 Cm , Pre Bav / Pd Balloons , Over The Wire Balloon Valvuloplasty Catheter – Non-Compliant With Rapid Inflation And Deflation, Rupture Resistant, With Two Radiopaque Markers At Each End, 0.035” Guidewire Compatible, With Two Lumen And Luerlock Hub One Each For Placement Over The Wire And Balloon Inflation / Deflation. Shaft Length 110 Cm Balloon Diameter: 18, 20, 21, 22, 23, 24, 25, 26, 28 Mm Length: 4.5 Cm Sheath Compatibility: 11- 14 F ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Over The Wire Balloon Catheter For Temporary Occlusion Of Large Vessels Like Aorta-Compliant Balloon Made Up Of Polyurethane Material, 0.035” Guidewire Compatible, With Two Lumen One Each For Placement Over The Wire And Balloon Inflation / Deflation, With Two Radiopaque Markers At Each End. Balloon Diameter: 32, 46 Mm Catheter Length: 100, 120 And 140 Cm Sheath Compatibility: 12- 14 F ( Only Manufacturers / Firms Having All Mentioned Diameters And Lengths Will Be Considered. ) , Miscellaneous Consumables , Radiolucent Ecg Electrode , Pressure Bag With Manometer For Iv Infusion , Pressure Domes With Cables Compatible With Philips Allura Fd10 / 20 , Disposable Image Intensifier Cover For Philips Fd10 / 20 , Dvd With Rgssh Printed ( 4-5 Gb Storage ) , High Performance 9V Alkaline Battery For Use In Temporary Pulse Generator
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 14
Delhi View Result →
43.
Housing Urban and Rular Development #10522829 Price Bid
Rmo Electrical And Mechanical Services At Various Aam Aadmi Mohalla Clinic . ( Sh - Maintenance Of Electrical Services ) , Maintenance & Upkeep On Monthly Basis Of All Internal And External Electrical Installations In Aamc Office Building . Including Attending/Rectification Of Complaints Received , Round The Clock On All Days In A Month Including Sundays And Holidays , Complete With All Materials , Labour , T&P Etc . As Required As Per Details Of Aamc Buildings And External Installations Given Below And As Per Terms And Conditions Attached Herewith . ( I ) Internal / External Electrical Installations Comprising Of Main Boards , Dbs , Earthing , Wiring Including Conduits , Channels , Switches , Socket Outlets Rewinding/Repair Of Ceiling Fans/Exhaust Fans , Air Conditioner , Water Dispencer , Invertor , Regulators , Condensers , Mcbs , Mccbs Isolators , Bulb Holders/All Type Of Lamp/Fittings Including Lamps , Tubes Replacement In Following Quarters/Buildings- Kabir Basti Malka Ganj ( Within Premise Of Raghushalla , Delhi , Timarpur , Malka GanjDjb Site , A Block , Nehru Vihar , Mukherjee Nagar , Timarpur , Djb Se Office Lucknow Road , TimarpurNear Crossing Under Sangam Vihar Flyover , TimarpurDjb Site , Mukundpur Part 1 , Near Transport Authority Burari . BurariDjb Site , Pradhan Enclave , Badarpur Majra . BurariBurari Jogi Chopal , Vijay Colony , Delhi , BurariJharoda , Milan Vihar , BurariBurari , Uttrakhand Enclave , BurariNear Pwd Office , Awtar Singh Marg , Gopal Pur . TimarpurMandeliya Road Mohalla Clinic , Kamla NagarNathupura Mohalla Clinic , BurariHardev Nagar Mohalla Clinic , Burari
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Delhi View Result →
44.
Housing Urban and Rular Development #10514981 Price Bid
Construction of Air - conditioned Bus Stand at different places in the district of paschim Bardhaman. . Location: Burnpur Road Crossing, Nos.-1
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Local Bodies No of Bidders 1
West Bengal View Result →
45.
Agriculture #10435392 Price Bid
Fht/8-3/2020-21/Field Job Tender For Various Services For Farm Field And Lab Work ( Unskilled Nature ) At Fht Division Iari Nd , Agricultural Practices ( A ) , Preparation Of Basin , Application And Mixing Of Manures In Pits , Polythene/Organic Mulching In Basins Of Mango , Citrus , Guava , Grape And Other Fruit Plants , Application Of Plastic Mulch In Different Plots , Pit Filing With Soil : Fym Mixture , Cutting Of Weeds / Grasses By Sword / Rapier / Blade , Preparation Of Fertilizer And Micronutrients Mixture And Application In Beds Under Polyhouse Or Nethouse/Open Field , Leveling Of Experimental Field , Harvesting Of Fruit Crop/Intercrops , Mannual Weeding In Intercrops /Fruits Plants Row/Basin , Preparation Of Mango , Guava , Citrus Plots For Intercropping And Application Of Organic And Inorganic Manures And Fertilizers , Pit Digging For Planting/Replanting/Gap Filling , Cleaning And Removal Of Grasses/Weeds On Bunds/Irrigation Channel , Road Etc . , Assistance For Irrigation In Different Blocks From Hydrant Water Through Channel , Removal Of Drip Pipeline During Ploughing In Plots , Assistance In Ploughing Through Tractor/ Power Tiller , Bed Preparation For Experimental Block , Laying Of Dripline , Application Of Salinity Treatment , Making Of Irrigation Channel And Basin Around Fruit Tree , Pruning , Plant Protection And Harvesting Etc . ( B ) , Control Of Caterpillar/Borer In Mango , Citrus And Guava By Cleaning Of Holes , Application Of Insecticide Followed By Sealing , Application Of Bordeaux Paste Or Any Other Chemicals On Tree Trunk Of Fruit Plants Upto ( 1M Height ) , Removal Of Pruned , Dead And Fallen Wood , Leaves And Dry Grasses From The Research Bock/Farm Area To Collection Point , Tying Of Polythene Strip ( 30 Cm ) Around The Tree Trunk Of Mango And Application Of Grease , Pruning In Ber , Phalsa , Grapes And Other Fruit Trees , Removal / Removal Of Dead Branches / Crushes Branches In Mango , Citrus , Grapes , Ber Etc& Other Fruit Trees , Pruning /Removal Of Water Sprouts /Dying Twrigs In Fruit Plant , Application Of Bio-Fertilizer/Bioagent In Fruit Trees , Thatching And Plastic Covering Of Fruit Plants During Winter ( 1-3 Years Old Plants ) , Staking Of Newly Established Fruit Trees , Spraying Of Chemical In Papaya , Phalsa And Nursery Plants , Spraying Of Chemical In Mango , Citrus , Guava Grape , Nursery Operation And Nethouse /Polyuhouse ( C ) , Shifting Of Seedling Into Polyhouse And Net House ( 4X 6 ) , Shifting Of Seedling From Primary Nursery To Polybags ( 4X 6 ) , Praparation Of Mixture For Filling Of Polybags ( 4X 6 ) , Filling Of Polybag , Portrays With Potting Media And Sowing ( 4 X 6 ) , Praparation Of Soil : Sand: Fym Mixture And Filling Of Polythene Bags ( 4 X 6 ) With Mixture And Sand : Soil : And Fym And Planting Of Saplings , Weeding/Removal Of Grasses From Sapling In Polybags / Portrays / Pots , Extraction Of Stone From Fruit , Washing And Cleaning Of Mango For Rootstock Raising , Making Of Cuttings For Plant Multiplication , Air Layering In Fruit Crops , Grafting In Fruit Plants , Budding In Fruits Plant , Seed Extraction Of Fruits In Citrus , Gauva , Papaya & Grape , Digging And Lifting Of Grafted/Budded/Layerd Saplings , Hybridization ( D ) , Assistance During Crossing ( Hybridization ) In Following Crops ( Approx . 2000 Flower In Each / Season ) I . E . Mango , Citrus , Grape , Guava , Papaya
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 3
Delhi View Result →
46.
Health and Family Welfare #10433257 Price Bid
Supply Of Machine, Equipment And Others , List Of Machine And Equipments , Laproscopic Hd Camera Brand - Karl Storz/Conmed/Olympus Technical Specification Resolution: 1920X1200 Pixes / 1900X1000 Pixes Cable Length: 300 Cm , Ultrasonic Harmonic Scalpel Brand - Johnson Technical Specification Dimensions: (Hxwxd) 5.3 14.5X15.2 Voltage: 100-240 Vac Frequency: 50/60 Hz Rated Current: 3 Amp , Ultrasonic Harmonic Scalpel Brand - Valley Lab Technical Specification Macrobipolar/Bipolar: 473 Khz Sinusoid, 100% Duty Cycle. Seal: 473 Khz Sinusoid Pulsed , Hand Instruments For Laproscopy Brand- Karl Storz/ Olympus Technical Specification I) Veress Needle: It Should Be With Spring Action Blunt Style -12 Cm: 1 No 10 Cm: 1 No 8 Cm: 1 No Ii) Trocar And Cannula:10 Mm: 2 Nos 7 Mm: 1 No. 5 Mm 6 Nos It Should Consists Of Trocar, Cannula With Insufflation And Multifunctional Valve And Must Have Pyramidal Tip. Iii) Reducer/Reduction Sleeve 5 Mm. 1 No Iv) Telescopes: 10 Mm- 0°- 1 Nos -30? - 1 Nos5 Mm-30? 1 Nos Rigid Rod Lens System Provides Good Resolution And The Better Dept Perception. It Should Have Uniform Image Brightness And Autoclavable. The 300 Forward Oblique Angle And Permits For Greater Latitude For Viewing Underlying Areas Under Difficult Anatomical Conditions. V) Suction Cannula: 10 Mm - 1 No 5 Mm -1 Nos Vi) Laparoscopic Scissors: Curved (Monopolar Metzenbaum Dissector 5Mm Diameter): 1 Nos Straight (Bipolar):1 Nosperitoneal Scissor: 1 Nosvii) Unipolar Forceps (Hook & Spatula): 2 Nos Viii) Bipolar Forceps : 2 Nos Ix) Atraumatic Forceps: Maryland Dissector Forceps: : 2 Nos. Fenestrated Forceps: : 2 Nos. X) Needle Holder (Flat Jaw) With Handle : 2Nos Xi) Monopolar Cable (Reusable):1 Nos. Xii) Bipolar Cable (Reusable): 1 Nos Xiii) Allis (Double Row Of Teeth) Grasper: 1 Nosxiv) Aspiration Needle: 1 Nos. Xv) Reducer/ Reduction Sleeve (5Mm): 1 Nos Xvi) Grasping Forceps (Toothed & Rachet 5Mm): 2 Nos Xvii) Laparoscopic Knot Pusher: 1 Nos Xviii) Clip Applicator (Reusable): 5Mm -: 1 Nos : 10 Mm: Ino Xix) Uterine Manipulator: 1 Nos Xx) Clips( Medium & Large) Xxi) Drilling Needle:1 Nos Xxii) Infiltration Needle: 1 Nos Xxiii) Biopsy Forceps (Toothed Punch Biopsy): 1 Nos Xxiv) Myoma Fixation Screw: 2 Nos Xxv) Tissue Morcellator With Base Unit & Accessories: 1 Nos , Dual Wavelenght Laser Brand- Zeiss Technical Specification Laser Type: Diode, Semiconductor Wavelength : 1470Nm+635Nm Max Power: 15 Watts/1470Nm+5Mv/635 Aiming Beam : 635Nm/1, 4Mw Max Or 515Nm/2, 5Mw Max Operation Mode : Continuous Or Modulated Pulsed Time : 0.05Ms-1000Ms Beam Delivery : Sma905 Connector Optic Fiber Compatible : Optic Fibers Having A Core From 200Um To 1000Um, Na=0.22~0.48 Beam Emission Initiation : Footswitch Controller :Microprocessor Display : 10.1 Ips With Touch Panel Medical Approved Cooling :Internal, Air And Thermoelectric Cooling Power Supply Of The Laser: Dc 24V/8.33A From The Separate Ac Power Supply Of Ac Adapter : Single Phase 100-240Va; 50-60Hz, Max 90W Ac Adapterdc 24V/8.33A Medical Approved Laser Dimensions: 27Cm*24,5Cm X 9Cm Laser Weight: 2.75Kg Laser Case Dimensions : 53Cm X 38Cm X 23Cm Weight Of Laser With Cases : 9Kg Environmental Conditions During Work : From +10 To 24°C Degree, Relative Humidity From 30% Up To 60% Cass Of Medical Deviceiib Laser Safety Class 4 Electric Safety Class I Type B Housing Protection Degree Ip20b , Hd Camera Set Brand- Karl Storz/ Olympus Technical Specification (I) Hopkinsa® Forward-Oblique Telescope 30A, Diameter 4 Mm, Length 30 Cm, A Utoclavable, Fiber Optic Light Transmission Incorporated, Color Code Ed :1 Nos (Ii) Telecam C3 : 1 Nos (Iii) Image1 St™ Hx One-Chip Full Hd Camera Head, 50/60 Hz, Fixed Focus, Prog Ressive Scan, Soakable, Gas-And Plasmasterilizable, Focal Length F = 16 Mm, 2 Freely Programmable Camera Head Buttons, For Use With Image1 X-Link Tc301, Tele Pack + And Tp101 : 1 Nos (Iv) Medical Grade Surgical Monitor - Fhd : 1Nos (V) Cold Light Fountain Power Led 175 Scb, With Integrated Karl Storz-Scb, High-Performance Led And One Karl Storz Light Outlet, Power Supply 11-240 Vac, 50/60 Hz Including: 400 A Mains Cord 20090170 Scb Connecti G Cable : 1Nos (Vi) Fiber Optic Light Cable, With Straight Connector, Extremely Heat-Resi Stant, With Safety Lock, Diameter 4. 8 Mm, Length 250 Cm :1 Nos , T U R P Set Brand-Olympus Technical Specification (1) Cystoscope-Urethroscope Sheath, 22 Fr :1 Nos (2) Telescope Bridge, With 1 Lockable Channel, For Use With Cystoscope Sheaths : 1Nos (3) Working Element, E 1 Working Element (Also For Use With Optical Urethrotome) 2 Cutting Loops2 Coagulat Ng Electrodes 2 High Frequency Cords 1 Protection Tube . The Thumb Support Is Movable. In Rest Position Th Electrode Is Inside The Sheath.:1 Nos (4) Resectoscope Sheath, 26 Fr, 1 Nos (5) Schmiedt Visual Obturator, : 1 Nos (6) Cutting Loop Angled, 24/26 Fr., Units Of 6 : 1Nos Ellik Evacuator:1 Nos (7)Urethrotome Sheath, 21 Fr. Urethrotome Sheath And 2 Luer-Lock Cones.:1 Nos (8) Obturator, For Urethrotome Sheath, 21 Fr.1 Nos Sachse Cold Knife, Straight, Not To Be Used With Hf Current This Artic Le Is Only Available In Units Of 6 :1 Nos , Flexible Cystoscope Brand-Olympus Technical Specification Cysto-Urethro-Fiberscope, With Contrapositive Deflection Mechanism, De Flection Of Distal Tip 210°/140, Direction Of View 0°, Angle Of View 10, Working Channel Inner Diameter 7 Fr., Sheath Size 15.5 Fr., Worki G Length 37 ??, Consisting Of: 11272 Cu1 Cystourethro-Fiberscope 2767 A Case 27023 Fe Grasping Forceps 27023 Ze Biopsy Forceps 13242 Xl Lea Age Tester 11025 E Pressure Compensation Cap 27651 B Cleaning Brush 27 14 Y Lueradaptor , Echocardiography Brand-Ge Healthcare/ Philips / Siemens Healthcare/Bpl Technical Specification A) 2D, M-Mode, Colour M-Mode B) Colour Flow Doppler Imaging C) Fully Steerable Pulsed Doppler D) Fully Steerabie Continuous Wave Recall E) Digital Cine Replay Of All Imaging And Doppler Modalities. F) On Screen Cine Storage & Image Recall G) Digital Image Storage And Patient Archive With True Scanner Frame Rates. H) Full Measurement And Analysis Capabilities. Both On Line And Offline Preferable. I) Imaging Frequencies From 1 Mhz To 15 Mhz J) Review Of Stored Ultrasound Images. K) User Adjustable B Colorization Maps, Gain Settings, Colour Doppler Baseline, Angle Correction And Other Important Parameters With Live/Frozen/Archived Images/Loops. , 12 Lead Ecg Machine (Brand - Bpl/Maestros) Technical Specification Electrocardiograph Should Have Capability Of Recording 12-Lead Ecg And Should Have The Following Features: 1. Should Have Simultaneous Acquisition Of 12 Leads 2. Should Have A Display To Preview The Ecg Waveform Before Printing 3. Should Have 7 Inch Or More Display With High Resolution Screen 4. Should Be Compact, Portable And Easy To Operate 5. Should Have Keyboard For Manual Entry Of Patient Data 6. Should Have Provision For Providing Hospital Name On The Printed Record7. Should Work On Li-Ion Battery8. Should Have A Frequency Response Of 0.01-300 Hz 9. Should Have Sampling Frequency Of 15,000 Hz Or More10. The Device Should Weigh Less Than 5.5 Kgs With Battery11. Should Have A Special Arrhythmia Triggered Mode Of Printing12. Should Have Pacemaker Detection Facility 13. Should Be Able To Record On Different Modes Of Sensitivity: 2.5,5,10,20 Mm/Mv & Agc14. Should Have Different Recording Speeds: 5, 10, 12.5, 25 And 50 Mm/Sec15. Should Have Different Filters Available For Smoothing Of Waveform16. Should Have Ac Filter, Emg Filter: 25 Or 35 Or 45 Hz Or Off17. Should Have Anti-Drift Filter18. Should Have Different Print Formats: 3/6/12, 3X4 With Rhythm Leads, 6X2, 12X119. Should Have A Large Storage Of 700 Ecgs Or More20. In Case Of Error In Lead Connections, The Machine Should Display The Change In Color Of Particular Lead.21. Should Be Able Transfer Data Directly In Pdf Format To Usb22. Should Be Able To Printout Records On Thermal Paper As Well Z-Fold23. Should Have Facility Of Printing In Automatic/ Manual/ Rhythm/ R-R Mode Of Printing24. Should Have Facility For Interpretations And Measurements25. Should Provide Detailed Printout Of Patient Data26. Should Have Paper Of Minimum Width Of 210Mm27. Should Have The Capability To Generate Any Number Of Ecg Copies For Distribution28. Should Be Able To Connect To Pc 29. Should Be Able To Operate To A Maximum Of 4 Hours On A Newly Charged Battery30. Should Have Direct External Printer Connectivity31. The Unit Should Be Portable And Should Be Able To Carry With Help Of A Handle.32. The Product Should Be Ce Certified33. The Manufacturer Should Be Iso Certified34. The Device Should Be Provided With Standard Accessories:A) Ecg Cable (Adult)-1 Nob) Gel Bottle- 1 Noc) Chest Electrodes (Set Of 6)- 1 Nod) Limb Electrodes (Set Of 4)- 1 Noe) Z-Fold Paper - 1 Packf) User Manual-1 No , Multipara Patient Monitor(Brand - Drager/Penlon/ Bpl) Technical Specifications For Multipara Monitor 1. Multiparameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,(Massimo),Nibp (Suntech) Temperature.3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have12-Inchcolor Lcd Display.5. Should Have Dual Modes Of Operation: Rotary Knob.6. Should Display 7 Waveforms Or More7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen.8. Ecg: Should Be Able To Monitor Ecg Through 5-Lead Patient Cab Should Have Manual St Analysis Window ,Should Detect 20 Arrhythmias And Generate Alarms. , The Priority Of Arrhythmia Alarms Can Be Configurable, Should Measure Pvc &Pac Should Be Able To Monitor Heart Rate From 10-300 Bpm Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etcshould Have Pacemaker Detection Facility Respiration: Measurement Range Of 0 To 150 Breaths Per Minshould Have Gain Selection: ×0.25, ×1, ×2, ×4 Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S Should Have Apnea Detection Facility Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10 Spo2: Should Have Massimo Technologyshould Have Measurement Range Of 0~100 % Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: Must Be Of Suntech Medicaltechnology For Clinical-Grade Blood Pressure Measurement Have Auto, Manual, And Stat Modes Of Operation For Nibp. Should Have A Measuring Range Of 0-280 Mmhg Should Have 2 Channels For Temperature Monitoring Should Have Data Storage Capabilities:72 Hours Of Trend Data Storage. , Bp Machine Brand - Pagoda/ Omron/ Platinium/ Dr Trust/Bpl Technical Specification Should Be Able To Measure Blood Pressure And Pulse Rate In Adult As Well As Pediatric Patients. Should Be Based On Oscillometric Measurement Technology, Using Dynamic Linear Deflation Method. Should Have Backlight Lcd Display With Easy To View Readings In Dim Light. Pressuremeasurement Range Should Be 60 To 250Mm Hg Systolic, And 40 To 200Mm Hg Diastolic. Pressure Display Accuracy Of +/- 3 To 5 Mm Hg Pulse Rate Measurement Range Of 40 To 200 Per Minute Pulse Measurement Accuracy Of Within 5% Should Include Ac Adapter (Input Range 100-240V And Output Voltage Dc 6V), Preferably With Rechargeable Battery (3.6V To 4.8V, 1900 To 2400Mah) Cuff (22 To 32 Cm Size) Should Be Supplied With Standard Adult Size Single Button Operation For Start And Stop Functions With Auto-Inflation Of Blood Pressure Cuff. , Ventilator Brand - Drager/Bpl/Medisys Technical Specification 1. The Ventilator Should Be High-Endventilator Suitable For Ventilating To Adult And Pediatric Application. Should Have Advanced Microprocessor Control System With Individual Selection Of Various Ventilation Parameters. 2. The Unit Should Be With Altitude Compensation For Volume And Btps Correction For Monitoring3. The Unit Should Be Of Wall Independent Gas Delivery System. Demonstration Of The Equipment Is A Must Demonstration Of The Equipment Is A Must4. Should Have Facility For Invasive And Non-Invasive Ventilation;5. The Ventilator Should Have 12” Or More Lcd Screen With Touch Facility For Display Of Waveforms. Should Have Brightness Modes Like Day/Night-Mode. The Real Time Display Of All Parameters/Waveforms Should Be Clearly Visible From All Angles6. Should Have Modes Of Ventilation Equipped With Newer Modes Of Ventilation:A) Assist/ Controlb) Volume Control Modes: Vcv, Vc-Simv, Plvc) Pressure Control Modes: Pcv, Pc-Simv, Bi-Level, Bilevel-St, Pc-Aprvd) Spontaneous Ventilation Modes: Psv, Cpap, Bilevel /Similar, Bilevel St / Similare) Prvc/Pcv-Vg/Dynamic Bilevel/Or Its Equivalent Modef) Closed Looplung Protective Mode- Asv/Nava/Wobov/Alpv/Smart Care (At Least 1 Of The Mentioned Mode Is Mandatory)G) Should Have Pav (Proportional Assist Ventilation) / Pps (Proportional Pressure Support)/ Paps (Proportional Adaptive Pressure Support)H) Cpr (Resuscitation Mode),I)Niv In All Pressure Modes7. Hfot /Nasal Cpap Breathing Therapy Should Be Capable Of Adjusting The Range Up To 60Lpm8 A) Apnea Backup Ventilation In All Modes8 B) It Should Have Weaning Analyzer Tools : Sat & Sbt9. Should Have In-Built Nebulizer With Capability To Deliver Fine Particle Size Of To Be Used In Line10. Should Have Facility To Measure And Display The Following Parameters:A) Airway Pressure (Peak & Mean)B) Tidal Volume (Inspired & Expired)C) Minute Volume (Expired)D) Spontaneous Minute Volumee) Total Frequencyf) Fio2 Dynamicg) Intrinsic Peep, V Trap & Time Constant (Rcexp)H) Resistance & Compliance11. Automatic Compliance And Leakage Compensation For Circuit And Et Tube 12. Should Have Facility Of Logbook, For Events And Alarms With Date & Time 13. Should Have Following Setting & Monitored Parametersa) Tidal Volume; Pre-Set Range For Both Pediatric & Adult Modes To Be Providedb) Inspiratory Pressure (Up To 100Cm Of H2o);C) Respiratory Rate 1 To120 Bpm;D) Apnea Back Up Rate;E) Peep: 0-50 Cmh2of) Inspiratory Flow: 0-120 Lpmg) Max Peak Flow : 280 Lpm Or Betterh) O2 Concentration: 21-100%I) Pressure Support: 1-(100-Peep) Cmh20j) Fio2 Setting Range Between 21% And 100%;K) Pressure Flow & Volume Curves;L) Loop For V-Flow, Flow-P, Flow-Paw And At Least 5 Storage Spaces For Reference Loopsm) I: E Ratio: 150:1 To 1: 299N) Ramp Time: Up To 3 Seco) Inspiratory Time: 0.2 To 15Sp) Pause Time; Exp/Insp Holdq) Pressure Trigger: Up To -10Cmh2o And Flow Trigger Up To 20 Lpm;R) I Flow/T Plateaus) Resistance & Compliance (Cdyn & Cstat)T) Leakageu) P Plateau 14. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw15. Should Have Weaning Parameters;Rsbi,Vt Spont, R Spont ,Vt/Ibw16. Facility To Calculate Lower And Upper Inflection Point (P/V Flex Points)Should Have Recruitment Manoeuvre17. Should Have Automatic Suction Routine & O2 Flush18. Should Have A Dedicated Bronchoscopy Function To Allow & Compensate Ventilation While Performing Bronchoscopy19. Should Have Trend Of 7 Days And Above With Facility To Transfer Through Usb Interface20. Alarms Should Be User Friendly, Audio And Visual With Text Message, System Alarm Should Be For:A) Pressure Changes (High/Low)B) Tidal Volume Changesc) Minute Volume Changesd) High Peepe) High/Low O2 Concentrationf) Power Failure And Low Batteryg) Patient Disconnectionh) Apnea 21 A) The Ventilator Should Have Facility For Co2 Monitoring. Should Have Inbuild Etco2 Interface & Software To Accommodate External Optional Volumetric Etco2 In Future21 B) Should Be Upgradable To :Metabolic Monitoring (Indirect Calorimetry).Price To Be Quoted As Optional.22. The Ventilator Should Not Weigh More Than 12 Kgs 23. Ventilator Should Have In Built Non- Consumable Paramagnetic Oxygen Sensor That Shouldnot Require Change For At Least 5 Years.24. Flow Sensor Should Be Differential Pressure Technology, Or Ultrasonic.Flow Sensor Must Be At Expiratory End. Should Be Maintenance Free, Reusable And Autoclavable.The Flow Sensor, Inspiratory Port, Expiratory Port Should Be Easily Removable Without Using Any Tools & Should Be Autoclavable.25. Should Have Usb /Serial Interface For Communications With Networked Devices26. The Ventilator Should Have On Screen Help Menu For Alarm, Ventilation Mode & Ventilator Settings. The On Screen Help Menu Should Guide User On Solving The Alarms; Providing Information On Ventilation Modes & Settings. 27. Should Support Dual Limb Circuits Of Any Make And Not Ventilator Model Specific Circuits28. The System Should Have Inbuilt Rechargeable Battery With Backup With Minimum 2 Hours29. Power And Gas Requirements: A) Power Input To Be 220-240Vac, 50Hz (100-240 Vac) B) Gas Input (Air And Oxygen) - 29-100 Psi (29-87 Psi)30. The Ventilator Should Be European Ce Certified Or Us Fda Approved, And The Manufacturing Company Should Be Iso Certified.Accessories/Consumables To Be Supplied With Main Unit I. Icu Ventilator With Trolley – 1Nosii. Reusable Adultcircuit - 1 Nos Iii. Hinged Support Arm – 1 Nosiv. Hme Filters—5Nosv. Bacterial Filters-5Nos Vi. Hepa Filetr-1Nos Vii. Test Lung -1Nos Viii. High Pressure Oxygen Inlet Hose – 1Nos , Projector With Screen Brand - Epson / Benq / Lg Cinebeam Technical Specification Ce Marked, Power Supply: 220-240 V Ac, 50/60 Hz, Transparent Lcd Panel Display System, Minimum 5200 Hours Lamp Life, Min. 5800 Lumens Brightness, Contrast Ration 10000: 1, Aspect Ratio 16: 10, Resolution Xga (1024 X 786) With Hdmi And Vga In, Lan & Usb Support, Wireless Support, Light Weight, Remote Control Etc. , Phaco Emulsifier Machine Brand-Alcon Legion / Zeiss Technical Specification 1. Operating Frequency Should Be Approx. 40 Khz 2. Handpiece: Ultralight Ultrasound 4 Crystal Piezoelectric Hand Piece. 3. Us Modes: Continuous, Pulse, Single Burst, Multi Burst, Continuous Burst, Automated Programmable Modulation (Apm) 4. Automated Ultrasound Power On Demand: Ultrasound Management Technology That Automatically (De)Activates Ultrasound Us Delivered Only When Needed Ept Up To 50% Less & Better Followability. 5. Type Of Infusion: Iop Controlled, Synchronized Fluid Exchange System That Directly Measures And Simultaneously Controls Both Infusion And Aspiration Volumes In Real-Time. It Actively Compensates For Incision Leakage. Quattro Controlled Forced Infusion. 6. Display: 24 Inches Touch Screen. 7. Iop Range: 30-120 Mmhg 8. Vacuum Range 0 To 700 Mmhg 9. Aspiration Flow Rate 0 To 120 Cc/Min 10. Aspiration Control Modes: Vacuum Controlled Mode, Flow Control Mode 11. Chamber Stability: Irrespective Of Type Of Cataract, Surgical Conditions, Leakage (0 -12 Ml/Min) It Keep Chamber Stable & Maintain Targeted Iop Throughout Procedure. 12. Iop Recovery Time After Occlusion Break 200-250Ms For Vacuum In Range Of 200 -600Mmhg. 13. U/S Tips: Coaxial Phaco With Incision Size 2.2 Mm 14. Vitrectomy: Pneumatic Cutting Device15. Type Of Vitrectomy Cutter: 23G Anterior Vitrectomy Cutter16. Anterior Vitrectomy Range:Cut Rate 30 To 5000 Cuts Per Minute. 17. Actuation Medium For Vitrectomy: Compressed Air From Internal Source 18. Diathermy: Bipolar With Fixed And Linear Control Via Foot Pedal. 19. Type Of Diathermy Handpiece: Diathermy Forceps And Diathermy Pencil Eraser. 20. Instrument Tray Arm Length: Should Be 800Mm Or More. 21. Dual Linear Footswitch 22. Should Be Usfda And Ce Approved 23. Online Ups Should Be Providedaccessories: Phaco Hand Piece(Coaxial) -2 Coaxial Handpiece Tip I – 2 I/A Bi Manual Hand Piece – 2Phaco Tip (2.2 Mm)- 10 Phaco Sleeve (Silicone)(2.2Mm) – 10 Test Charnber- 10 Tubing And Cassettes (Disposable) – 100 Diathermy Cable With Forceps – 2 Phaco Wrench-2 Vit Cutter- 23 G; Single Use – 6Sterilization Container/ Tray , Autorefractometer & Keratometer (Ark) Brand-Zeiss- Visuref 150 Technical Specification (A)Device Data.(A) Refraction(1) Sphere -25.00D To +22.00D (In Steps Of 0.12D/0.25D)(Ii) Axix 0 To 180*) (B) Keratometer(A) Corneal Curvature 5.00 To 10.20Mm (In Steps Of 0.01Mm)(B)Corneal Redraction-33.000 ?? 67.50D (In Steps Of 0.12D/0.25D)(C) Corneal Astigment-0.00D To-15.00D50d (In Steps Of 0.12D/0.25D)(D)Axis 0 To 180* (In Seps Of 1*) (E) Corneal Diameter (2.00 To 1200Mm (In Steps Of 0.10Mm) , Humphrey Fied Analyzer ( Hfa3) Brand-Zeiss Technical Specification • High Quality Goldman Standard Automated Full Field Perimetry Of International Standard With Bowl Size Radius = 30Cm. • Computer & Monitor Should Be Integrated In The Perimeter (No External Computer). • Stimulus Size I, Ii, Iii, Iv & V.• Background Illumination 31.5Asb.• Maximum Temporal Range 80Deg.Suitable For Central 30, Neurological Tests As Well As Full Field Testing. • Central Field Test Patterns 30-2, 24-2,10-2, Macula.• Peripheral Field Test Pattern 60-4, Nasal Step, Custom Test. • Threshold Test Strategies Full Threshold, Sita Standard, Sita Fast , Full Threshold, Fast Pack, Sita - Swap.• Screening Field Test P-60, Ff-80, Ff-120, Ff-240,Nasal Step For Periphery .• Screening Test Strategies Two Zone, Three Zone And Quantify Defects.• Glaucoma Hemi Field Test, Heijl –Krakau Blind Spot Monitor• Video Eye Monitoring, Gaze Tracking Monitoring System, .. Vertex Monitoring And Head Tracking. • Touch Screen On Crt Monitor, Keyboard & Provision Of External Monitor & Keyboard.•Internal Hard Disk Drive.• Stimulation Duration 200Ms, Wavelength Broad Band Visible Light• Stimulus/Background Colour White On White.• Swap (Blue On Yellow) Perimetery. • Auto Pupil Measurement. • Kinetic Testing & Custom Kinatic Testing. • Motorised Chinrest, Motorised Table, Laser Jet Printer • Glaucoma Progression Analysis ( Gpa ) Software For Monitoring Disease Progression. With Visit Wise Graph &Visual Field Index (Vfi).• Releye Monitor.• Forum Software For Archiving & Offline Analysis Of Patient Data & Gpa Analysis Etc.• Hfa Dicom Gateway. , Laser Dcr Brand-Medfin Technical Specification Applicationsdacryocystorhinostomy Amplifying Medium Diode Ergonomics Tabletop Wavelength-980Nm Average Power -8W Weight -1.2Kg (2.65Lb) , Automatic Tourniquet System With Hose Cuffs Brand - Zimmer Biomet (Model Ats-5000) Number Of Ports Dual Port Number Of Potential Cuffs Dual Cuff Dual Cuff Mounting Options Table Or Pole Mount Table Or Pole Mount Battery Type And Life Lithium Ion 6 Hrs Lithium Ion 6 Hrs User Interface Touchscreen Touchscreen International Alarm Standard 60601-1-8 Compliant Compliant Display 10.1” Color 7.0 Color Minimum/Maximum Pressure 20/600 Mmhg 50/600 Mmhg Pressure Accuracy ±3 Mmhg (20–600 Mmhg) ±4 Mmhg (50-600 Mmhg) Limb Occlusion Pressure (Lop) Allows For Patient Specific Pressure, Which Allows For The Minimum Pressureto Be Used.Yes Noline Occlusion Detection (Acoustic Reflectometry)A Kinked Pneumatic Tube Can Prevent An Inflated Cuff From Deflating, Resulting In Unintentional Tourniquet Pressure. This Alarm Alerts Or Staff That There Is An Occlusion In The Line To The Cuff.Yes , Battery Opreated Heavy Duty Drill & Saw Brand -Manman/Biotech Specifications--- Drill And Reamer Hand Piece Attachments, Oscillating/S Reciprocating Saw Hand Piece Charger And Sterilization Handpiece For Drilling & Reamingtrigger Type Single Modes Available - Reverse & Forward Modedrill Speed 1000 Rpm Approxdrill Torque 4 Nm (35+ In Lbs)Ream Torque 16.5 Nm (145+ In. Lbs)Weight Of Hp With Batteries 1250 Gms Drilling And Reaming Attachments Hudson/Zimmer/Trinkle Reamer Attachment - Yesao Reamer Attachment - Yesao Type Drill Attachment With Quick Coupling - Yesjacobs Chuck With Minimum 6 Mm - Yeskeyless Chuck -Yes Wire Driver Attachment - Yespin Driver Attachment - Yes Dhs Reamer Attachment With Quick Coupling - Yesoscillating/Sagital Saw Hand Pieceergonomic Pistol Grip Design For Maximum Comfort And Control Yes Weight Of Hp With Batteries.- 1350 Gmssaw Speed - 15000+ Cpmcutting Arc - Between 4 To 5 Degreenoise Level - 60-85 Dblspecial Blades Each For Tkr And Thr (Nos) - 10 Battery Specifications Type Of Battery Lithium Ion (Li-Ion) Number Of Batteries 2 , Electric Cautery Machine Brand - Shalya/Enertech/Eclipse/Valley Lab 1) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology 2) Unit Should Have No Of Bipolar Modes Available 3) Unit Should Have Pure Sinusoidal Output Waveform In Hf Power Output In Cut And Bipolar Modes. 4) Type Of Display Should Be Lcd Touch Screen 5) It Should Adjust Power Level Automatically Depending On Tissue Type. 6) It Should Have Two Monopolar Output Channels. 7) Bipolar Current Meter Bipolar Current Meter 8) Unit Should Deliver Two Coagulation Output At A Time With Independent Control Over Each Output For On & Off. 9) Both Channels Should Work By Foot And Hand Control. 10) It Should Complete Self Testing During Power On. 11) Power Efficiency 98 Or More Than 98 12) Availability Of Advance Cutting Modes For Regular Open Surgery 13) It Should Accept Disposable And As Well As Reusable Patient Plate. 14) Unit Should Have Tissue Feedback, Pulsed Interval-Controlled Pulse Cut Function. 15) It Should Accept Dual Area And Single Area Patient Return Electrode. Should Give Green Indication If Dual Area Patient Plate Applied To Patient & Red Indication With Alarm Tone If The Patient Plate Is Not Applied. 16) Bipolar Should Work Without Patient Plate Or Patient Plate Error Condition. 17)Bipolar Should Have Auto Facility To Start & Stop Working Without Footswitch. 18) Unit Should Have Adjustable Delay Activation In Auto-Bipolar. 19)It Should Have Randomized Spray Coagulation For Larger Area Coverage.20)It Should Be Upgradeable For Argon Delivery Module From The Same Oem.21) Unit Should Be Useful For Underwater Procedures. 22) It Should Have Alarm Facility After Completion Of Bipolar Coagulation. 23) Unit Should Have Time Out Function For Automatic Stop The Hf Output If Prolong Unintended Activation. (Optional)24) Unit Should Have Touch Key Pad For Power And Mode Selection.25) System Should Give Error For Faulty Handswitch Of Footswitch In Monopolar & Bipolar.26) Unit Should Give Error For Faulty Keypad. 27) It Should Have No Of Segments Of Display 3. 28) Unit Should Operate From 180 V To 265 V Without Using External Stabilizer. 29) It Should Have Independent Foot Switch For Monopolar Two Paddle. 30) It Should Have Independent Foot Switch For Bipolar Single Paddle. 31) Unit Should Have Facility To Connect Either Monopolar & Bipolar Footswitch.32) Unit Should Have Remote Power Setting Facility From Sterile Field With Conventional Hand Switching Pencil. 33) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. 34)Manufacturer Iso 9001: 2008 & En Iso 13485:2012 Certified Company.35) Warranty Must Be 3 Years Or Higher 36) It Should Be Supplied With Following Reusable And Autoclavable Accessories: -1. Patient Return Electrode …………………….1 No.2. Hand Switching Pencil………………………. 1 No.3. Foot Switching Pencil…………………………1 No.4. Bipolar Forceps …………………………………1 No.5. Cable For Bipolar Forceps……………………1 No.6. Monopolar Footswitch ………………………1 No.7. Bipolar Footswitch ……………………………1 No. 8. Universal Adaptor …………………………….1 No.Set Of Electrode (Angled, Ball And Needle).1No10. Trolley With Lockable Castor Wheel Should Be Supplied1. Unit Should Be Eu Ce (4 Digit Notified Body Certified)2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode 3. Availability Of Test Report From Central Govt/ Nabl/Ilac Accredited Lab Covering All Parameters. And Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification. , Arthroscopy Set (Brand- Smith +Nephew / Karl Storz) Arthroscopy Set 30° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscope. Light Guide Insertion On Definitione Direction View With A J-Lock Fixation For Cannula.Working Length Of Not More Than 160Mm Optimal Centre-To-Edge Resolution For Enhanced Picture Quality Angle Of View: 30 Degree Diameter: 4Mm Arthroscopies Should Be Supplied With Compatible Cannulas High Flow, Double Valve, Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator, Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopy Set 70° (Arthroscopic, Sheath And Obturator) Wide Angle, Direct View 4K High Definition Arthroscopic Light Guide Insertion On Opposite Side Of The Direction Of View With A J-Lock Fixation For Cannula. Fully Rotatable With Fenestrated Tip & Conical And Blunt Tip Obturator. Sheath- 5.95 To 6.0Mm, High Flow Diagnostic Cannula, Double Valve, Fully Rotatable Cannula With Fenestrated Tip. Trocar-4.5Mm Conical Obturator To Fit With Cannula. Arthroscopic Power Shaver System: Input Voltage Of 100 To 240V, 50/60 Hz Power Consumption Not More Than 350Va. Two Separate Receptacles For Motor Drive And Powered Instrumentation. Shaver Should Have 2 Modes Of Oscillation For Aggressive Cutting Shaver Should Have Button For Flush Lavage Of Joints On Footswitch. Autoclavable Ultra-Light Hand Piece With Suction Facility, With 3 Hand Control Buttons And Replaceable Cable Long 10Ft (3 M). Maximum Torque Should Not Be Less Than 32Oz.In And Weight Should Not Be More Than 212 Gms Pedal Style Footswitch With 3 Operating Modes I.E. Forward, Reverse And Oscillation. On-Line Lcd Display For Speed And Direction Referral. Should Communicate With The Fluid Management System Once Connected With The Cable. Camera Control Unit: System Must Have Inbuilt 4K Uhd Camera Console, Led Light Source & Wifi Enabled Image Management System With Recording Via Usb Port Along With Recording In App Through In Built Wifi. Camera Resolution Must Be 3840*2160 (Native) 4K Camera Head: Camera Head Should Have 4K, 3 Chip Mos Video Sensor Technologymust Have Transport Shock And Vibration Compliance With Ista 3Avideo Field Rate 60 Hz Must Have C-Mount Autoclavable Coupler With 19.5 Mm Coupler Length Opt For 4Mm Scopes Must Have Digital Zoom Video Data Transmission High-Speed, Low-Voltage Differential Serial (Lvds), Digital Transmission Via 12-Foot Camera Cablevideo Output Format Full Uhd 2160P, 100% Compatible With Smpte St-425-5 When Used With The Ccu Altitude: 3000 Meters Maximum 4K Monitor: Monitor Should Have Resolution 4096 * 2160 Pixels Monitor Should Support Picture Size (Diagonal) 789.06 Mm (31 1/8 Inches) 1387.8 Mm (54 3/4 Inches) Monitor Should Support Effective Picture Size 698 * 368.1 Mm (27 1/2 * 14 1/2 Inches)Monitor Should Support Pixel Pitch 0.1704 X 0.1704 Mm Monitor Should Have Aspect Ratio Of 17:09Monitor Should Have Pixel Efficiency Of 0.9999 Size Is -125Mb 1300 Seconds Video / Gigabyte Storage 10000 Images/Gigabyte Storage Airprintt Is Required. , Fess Instruments Set Nus Surgery Fess & Dcr Surgery Instruments Brand -Kalelkar / Besco Blakesley Forceps 0 Blakesley Forceps 45Blakesley Forceps 90° Thrucut Forceps 0Thrucut Forceps 45° Thrucut Forceps 90 Maxillary Sinus Forceps 30, 90, 120Hewiser Forceps Tubular Rotatable Kerrison Punch Straight Kerrison Punch Curved Backbiting Forcep Tubular Rotatable Stammberger Ostrum Punch (Mushroom Forceps)Giraffe Forceps Upturned 55, 70, 90, 110 With Vertical Or Horizontal Opening Fronntal Sinus Bougie Set Of 4Sickle Knife Sharp/Blunt Ball Probe Double Ended Right Angledball Probe With J Hook Double Endedantrum Curette Oval Or Round Cup Suction Canulla 45 Or 90° , Micro Ear Surgery Instrument Set (Ear Surgery Instruments) (Stapedectomy Instruments) Brand -Kalelkar / Besco Technical Specification Sickle Knife , Circular Knife Flag Knife , Sickle And Flag Knife Double Ended , Sickle And Circular Knife Double Ended Circular And Flag Knife Double Ended , House Curette Double Ended, Elevator Pick Straight/Curved/Right Angled , Fisch Perforator 0.3 Mm To 0.8 Mm. Hand Burr , Piston Depth Guage , Stapedectomy Instruments , Piston Cutting Jig Piston Autoclaving Box , Teflon Pistonspistion Crimper Micro Ear Scissor Belluchi Operative Ear Speculam Set Of 4 Black Slotted Or Plain Endural Retractor 2X2endural Retractor Left/Right Plester Micro Suction Canulla 116 To 24Gmicro Suction Canulla Adaptor Silicone Suction Tubecartilage Slicer , Tonsillectomy Instruments Set Brand -Kalelkar / Besco Technical Specification Davis Boyles Mouthgag With 5 Blades Davis Boyles Mouthgag With 5 Slotteddraffin Bipod Stand With Plate Tonsil Holding Forceps Tonsil Dissector Cum Pillar Retractortonsil Dissection Forceps Tonsil Artery Forceps Straighttonsil Artery Forceps Curvedtonsil Artery Forecps Negustonsil Scissor Tonsil Snare Tonsil Snare Wire +Quincy Foreps +Adenoid Curette With Cage + Adenoid Currette Without Cage + Younker Suction Canulla +B.P.Handle No 7 + Negus Knot Tier +Thrroat Instruments Tracheatomy Surgery Instruments + Tracheatomy Tube Chevalier Jackson/Fuller + Mosquito Artery Forceps + B.P.Handle No 3 + B.P. Blade No 11 + Fine Scissor 4 +Tracheal Dilating Forceps + Kilner Catpaw Retractor +Skin Hook + Single Hook Retractor +Double Hook Retractor , Nasal Surgery Instruments Set (Septoplasty Instruments) Brand -Kalelkar / Besco Technical Specificationkillians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Specularm Set Of 4 B.P. Handle No 3+Freersdouble Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator Symes Double +Suction Elevator + Lucs Forceps Round Or Heart Shape + Jensen Middleton Septum Cutting Forceps + Jensen Middleton Septum Punch Forceps + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or. Plain + Hammer (Mallet) + Submucosal Diathermy+ Needle/Ball Probe + Nasal Packing Forceps + Spring Scissor + Catspaw Retractor + Tongue Depressor + Rhinoplasty Surgery Instruments + Raps + Cricoid Hook + Jenkins Chisel + Alar Retractor + Aufritch Nasal Retractor + Ash Septum Forceps + Walsham Septum Forceps + Gillies Osteotome + Nasal Packing Forceps + Silver Nasal Chisel With Guard Left/Right + Skin Hook + Cottle Retractor + S.M.R Instruments + Killians Nasal Speculam 2 To 3.5 + St. Clair Thomson Nasal Speculam Set Of 4 + Freers Double Ended Mucopericondrial Elevator + Symes Double Ended Mucopericondrial Elevator + Howarth Double Ended Mucopericondrial Elevator + Suction Elevator + Turbinectomy Scissor + Ballenger Swivel Knife Bayonet Shape + Tilleys Nasal Gouge Bayonet Shape With V Cut Or Plain + Hammer (Mallet) , Micro Laryngeal Surgery Instruments Set Brand -Kalelkar / Besco Laryngoscope Mls Black Finish Adult/Child/Paediatric With Fiber Optic Carrier Chest Supportlaryngoscope Distending Operating Type Laryngoscope For Filling With Endoscopemls Forceps Cup Type Straight/Left/Right/Upward/Downward Mls Forceps Serrated Type Straight/Left/Right/Upward/Downwardmls Scissor Straight/Left/Right/Upward/Downward Mls Vocal Cord Spreader Mls Mini Larygeal Forceps Triangular End Mld Needle Holdermls Ssickle Knife Mls Circular Knifemls Flag Knifemls Probe 45°, 90°Mls Curettemls Handle For Use With Straight Instumentssuction Tube With Thumb Control Insulated Probe For Coagulationbronchoscope/Esophagoscope & Instrumentsbronchoscope Negue Type Any Size With Fiber Optic Carrier Esophagoscope Any Size With Fiber Carrierhypopharyngoscope (Esophageal Speculam) With Fiber Optic Carrier Forceps Alligator Grasping Single Actionforceps Peanut Soft Tissue Single Actionforceps Cub Biopsy Type Single Action Forceps Patterson Type Single Actionforceps Universal Biopsy & Grasping Single Actionforceps Alligator Grasping Double Actionforceps Peanut Soft Tissue Double Actionforceps Cup Biopsy Type Double Actionforceps Patterson Type Double Actionforceps Universal Biopsy &Ngrasping Double Action Suction Tube Rigid With Thumb Conntrol , Mastoid Surgery Instruments Set Brand -Kalelkar / Besco B.P. Handle No 4 Kilner Catspaw Retractormollison Mastoid Retractor 3X3 Mollison Mastoid Retractor 4X4mahadevaiah Modified Mastoid Retractor Left/Right Jensen Retractorjolls Retractor Periosteal Elevatoroperative Ear Speculam Set Of 4 Black Slotted Or Plain Micro Suction Canulla 11G To 24Gmicro Suction Canulla Adaptor Mastoid Suctioncanulla Set Of 4 With Thumb Grip Sickle Knifecircular Knifeflag Knife House Curette Double Ended Elevator Adsons Toothed Forceps Adsons Non Toothed Forceps Needle Holder 6 Fine Scissor 4Micro Ear Crocodile Serrated Forceps Micro Ear Crocodile Cup Forceps Micro Ear Crocodile Scissors Malleus Nipper Ball Probe 45 Degree/90 Deegre Vien Graft Pressossicle Holding Forceps , Fiberoptic Flexible Video Laryngoscopy System Brand -(Penlon / Karl Storz) Specification 1) It Should Be Very Portable And Light Weight Device With Minimum Display Size Should Be 4 Inch With High Resolution Anti Reflective Display. 2) Should Have 180 Degree Horizontal Screen Rotation With Vertical Movement For Betterclinical Assistance. 3) It Should Be A Lithium Ion Rechargeable Battery-Operated Device With Low Battery Indicator. 4) Minimum Operation Item Should Be 130 Mins. 5) It Should Have Led Light Source At The Tip Of The Blade With Minimum 2 Megapixel Cmos Camera For Better View. 6) It Should Have Channelled And Without Channelled Blade Option. 7) Should Have 4Gb Inbuilt Memory For Continuous Recording & Image Capturing. 8) Blades Sizes Should Be Size 1,2, 3, 4,5 . 9) Blade Should Be Affordable, Sterile Which Connect Laryngoscope Handle With Lock. 10) Battery Life Cycle Should Be Minimum 300 Times. 11) It Should Have Iso & Conformity To Ce. , Fiber-Optic Video Bronchoscope(Brand - Karl Storz /Olympus ) Specification Fiber-Optic Video Bronchoscope Required With Video Illumination To Visualize And Document The Operational Area On Screen. It Should Consist Of Following Features: Monitorscreen 8 To 12 Inch In Size For Display With Touch Screen To Control Features With Hdmi Output For Connecting To A Big Screen Which Can Display Picture Simultaneously On Both Screens.Monitor Should Have Two Ports To Connect Two Video Endoscopes At One Time And Pictures Can Be Swapped Using Touch Screen. Monitor Should Be Chargeable, To Be Supplied With Charger And Should Have Facility To Be Used While Charging. Monitor Resolution Should Be Minimum 1920 X 1200 Pixels In 16:9 Format.Integrated Recording Of Video & Still Images Should Be Possible On Data Card Or Usb Drive With Jpeg And Mpeg Format Which Can Be Easily Transferred To The Computer/Laptop. Documented Videos & Still Images Should Be Easily Recalled On The Monitor. Monitor Should Have A Facility To Connect Flexible Scope Directly Without Any Special Coupler Or Accessory. Monitor Should Have Picture-In-Picture & Side-By-Side Mode To View Images From Flexible Video Scopes. Monitor Should Be Splash Proof According To Ip 54 And Should Be Shock Resistant.Monitor Should Have Lithium-Ion Rechargeable Batteries And Run For At Least 100 Mins. When Fully Charged. Soft Bag From Same Manufacturer Should Be Supplied To Place The Monitor And System Can Also Be Operated Without Taking Monitor Out From The Bag. Same Monitor Should Be Compatible With All The Below Mentioned Scopes Of Same Manufacturing Principal Company .Reusable Fiber Optic Video Bronchoscope.Single Use Flexible Intubation Video Endoscope A Fiber Optic Bronchoscope Is A Medical Device Used To Visualize The Airways During Bronchoscopy, A Procedure Where A Thin, Lighted Tube Is Inserted Into The Lungs To Examine Them. The Specifications Of A Fiber Optic Bronchoscope Typically Include Its Outer Diameter, Working Length, Field Of View, Angulation Capabilities, And The Diameter Of Its Working Channel. Key Specifications:Diameter: Bronchoscopes Come In Various Sizes, With Outer Diameters Ranging From 2.5 To 10 Mm. Smaller Diameters (E.G., 4.9 Mm) Are Suitable For Smaller Patients, While Larger Diameters May Offer Better Image Quality And Suction Capabilities. King Length: The Working Length, Which Is The Distance From The Distal End Of The Bronchoscope To The Insertion Point, Typically Ranges From 30 Cm To 60 Cm. View: This Refers To The Angle Of Vision That The Bronchoscope Offers. A Wider Field Of View (E.G., 110-120 Degrees) Allows For A Broader View Of The Airways. Angulation: The Ability To Bend The Tip Of The Bronchoscope Allows For Maneuvering Into Various Airways. Up And Down Angulation Capabilities Are Typically Around 180 Degrees And 130 Degrees Respectively King Channel Diameter: The Working Channel Is The Passage Through Which Instruments Like Forceps For Biopsies Or Suction Devices Can Be Passed. It Is Typically 1.2-2.3 Mm In Diameter Other Notable Specifications: 26/25 All Above Equipment Should Be From Same Manufacturers And Usfda & Ce Approved , Anaesthesia Workstation Complete With Anaesthesia Gas Delivery System, Vaporiser, Circle Absorber System With Built In Anaesthesia Ventilator & Withmultipara Monitor Brand - -Drager/Penlon/Bpl General • Should Have Provision For Delivery Of Oxygen, Nitrous Oxide And Medical Air • The Machine Should Be Capable Of Delivering Low Flow Anaesthesia. • The Anaesthesia Machine With Circle Absorber, Ventilator And Vaporiser Should Be From Same Manufactureranaesthesia Machine Should Be Ce Notified Body Approved. • Anaesthesia Machine Should Be Cdsco Approved. Vaporizer Should Be Us Fda Approved.Should Have Independent Attachments For Connecting Central Gas Supply And Pin Indexed Cylindershould Have Non-Interchangeable Pipeline Hose Inlet Connection To Pipelines For Medical Oxygen, Nitrous Oxide, And Medical Air Should Have Large Size Pressure Gauges, For Easy Visibility, Colour Coded, Two Each For Oxygen And Nitrous Oxide; One For Airanaesthesia Machine Frame Shall Be Manufactured In Strong But Lightweight Material.The Machine Shall Have A Maximum Of Four Castors/Wheels For Manoeuvrability With Front Two Castors Having Brakesshould Have Minimum Two Non-Lockable And Spacious Drawers For Storing Accessoriesthe Frame Shall Have Gcx Compatible Channels Incorporated For Mounting Other Accessories. • The Option For An Integrated Independent Oxygen Flow Meter For Oxygen Delivery Is Mandatory. Frame Shall Accommodate Up To Two Backup Cylinders One Each For Oxygen And Nitrous Oxideon Activation Of The System On/Off Switch Gas Flow And Vaporization Shall Immediately Be Availableshould Have Selector Switch For Selecting Open And Close Circuit Operation • The Common Gas Outlet Shall Be Mounted At The Front Of The Machine (Not Rear Or Side) To Be Easily Accessible In The Event Of An Emergency And For Use Of Alternate Breathing Circuits • The Option For Illumination Of The Writing Table/Work Surface Is Mandatory • The Frame Should Have Integrated Power Outlets To Supply A Minimum Of Three External Devices • Should Have Top Shelf, Manoeuvring Handle And Footrest • Machine Should Have Table Topwork Space To Keep Drugs. • The Unit Should Have A Battery Back-Up Facility For The Ventilator In The Event Of Power Loss. Minimum 90 Minutes Battery Backup Required. • Input Power :100 – 240 Vac Gas Flow • Antistatic And Cascaded Dual Flow Tubes Should Be Available For All Gases (O2, N2o& Air) To Allow Suitable Resolution And Accurate Control At Low Total Fresh Gas Flows. • The Flow Range Shall Be 150Ml-10 Lpm • Should Have N2o Cut Off Facility If O2 Supply Fails. • Should Have Oxygen Failure Alarm Both Visual And Audible. • Should Have Oxygen Flush Facility Bypassing Vaporiser. O2 Flush Switch Should Be Conveniently Placed For Easy Accessibility. O2 Flush Switch Should Be Non-Lockable. • The Unit Shall Have A Mechanical Anti-Hypoxic Device (Ahd) System To Control The Ratio Of Oxygen And Nitrous Oxide. A Completely Mechanical Ahd System, That Requires No Electricity, Is Mandatory • The Mechanical Ahd System Must Limit Minimum Oxygen Levels To Approximately 25% • Should Have Minimum Mandatory Oxygen Flow Of 100 Ml When Switched On • It Shall Be Possible To Deliver Air With Only Basal Flow Oxygen Independent Of The Abovementioned Hypoxic Control. • Gas Flow Shall Be Controlled Mechanically Only • Visual Display Of Individual Gas Flows Is Mandatory, This Shall Be By Physical Means Such As Glass Flowmeters Independent Ofelectrical Power • Flow Meters Should Have The Option Of Backlight Illumination • In The Event Of Complete Power Loss And Battery Failure It Shall Still Be Possible To Set The Fresh Gas Flow Accurately For Each Gas, Manually Ventilate (With Bag) And Continue To Keep The Patient Anaesthetized. • Anaesthesia Machine, Vaporizer And Ventilator Should Be From Same Oem. • Provide Isoflurane And Sevoflurane Vaporizer With Themachine. Vaporizers • The Unit Should Accommodate At Least Two Vaporizers For Anaesthetic Agent Delivery. • The Manifold Should Only Accept Vaporizers With Approved Back Bar Connections And Prevent Usage Of More Than One Vaporizer Simultaneously. Preferably Selectatec Compatible Back Bar. • Vaporizers Supplied With The Unit Shall Be Routine Maintenance Free For The Life Of The Product • Vaporizers Supplied With The Unit Shall Be Manufactured From Lightweight Materials To Aid In Fitting & Removal • Should Have An Operating Flow Range Of0.2 – 15 L/Min And Nominal Capacity 250 Ml Ventilator • Ventilator Shall Cater For A Diverse Range Of Patient Groups From Neonates To Adult Patients With Restrictive Airways • Ventilator Should Be Pneumatically Driven And Controlled Electronically • Ventilator Shall Have A Large 8.4” Colourtft Display, For Exclusive Use Of Ventilator Control And Monitoring. • Control Ofthe Ventilator User Interface Shall Be By Touch Screen And Rotary Dialventilator Shall Have The Following Ventilation Abilities, Volume Control (Vcv), Pressure Control Ventilation (Pcv), Simv-V And Simv-P ,Spont/Pressure Support Ventilation (Psv),Manuaassisted Modes Of Breathing Shall Be Flow Triggered. Ventilator Shall Compensate For Fresh Gas Flow And Compliance Of The Entire Circuit. Should Have User Adjustable Alarms For Major Parameters Such As Tidal Volume, Minute Volume,Fio2,Airway Pressure, Frequency Apnea Alarms Must Be User Adjustableto Allow For All Operating Conditions And Phases During Anaesthesia Ventilator Should Have The Ability To Display Patient Spirometry Loop Ventilator Should Also Display Waveforms For Flow, Volume And Airway Pressure Stem Absorber & Not Remoted Via Tubes Or Channelsvolume Measurement Sensors Should Not Be Disposable Typeventilator Parameterstidal Volume- 10Ml-1600 Mlfrequency- 4-100 Bpm I:E Ratio- 4:1 To 1:10 Inspiratory Pause - 0-60% Of Ti Peep - Off, 3-30 Cmh2o Pressure Limit - 5-70 Cmh2o Minute Volume-0.5 To 60 Lpm Breathing System • The Breathing System Designed So That It Can Be Removed & Replaced As A Complete Unit Without The Use Of Tools • All Parts Of The Breathing System That Are In Contact With Patient Gas Shall Be Latex Free And Autoclavable Except For Non Autoclavableremovable Part Like O2 Sensor And Pressure Manometer. • Bag/Vent Switch Shall Be Integrated On The Absorber And Should Activate Ventilator In Vent Mode And Vice Versa (One Step Operation). • Breathing System Should Have Heater System To Avoid Water Condensation. • Should Have Quick Release Canister For Sodalime , Capacity Minimum 1.5 Litre • The Breathing System Absorber Canisters Shall Have A Bypass System To Allow For Canister Change Mid-Case Without Loss Of Ventilation Pressure. The Requirement For An Automatic Bypass Without Extra Input From The User Is Mandatory • The Ventilator Bellows Shall Be Clearly Visible And Be Of Upright Design.The Bellows Should Ascend On Expiration To Provide A Quick Visual Indicator For Assisted Breathing, Spontaneous Breathing And System Leaks. • Same Bellows Shall Be Used For Adult And Pediatric Application • Should Have Provision For Fio2 Monitoring Cell And Fio2 Value Should Be Monitored On The Main Screen. • A Bag Arm With Positional Adjustment Shalmulti Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Massimo),Nibp (Suntech) Temperature,Dual Ibp, Agm ( Massimo) Mainstream. 3. Should Have 12-Inch Color Lcd Display. 4. Should Have Dual Modes Of Operation: Rotary Knob. 5. Should Display 7 Waveforms Or More 6. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 7. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 8. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 9. Spo2: ? Should Have Massimo Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 10. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 11. Should Have 2 Channels For Temperature Monitoring 12. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. O 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 13. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 14. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. 19.Monitor Should Be Able To Directly Connect With Hospital Information System (His 20.Should Have Standby And Night Mode 21.Should Have Li-Ion Battery 22.Battery Should Have 3.5 Hrs Of Operation 23.Monitor Should Be Ce Certified 24.Manufacturer Should Be Iso Certified 13485:2016 , Bi-Phasic Defibrillator Brand - Bpl/Maestros Technical Specifications For Bi-Phasic Defibrillator • The Machine Should Have Facility For Ecg Monitoring, Bi-Phasic Defibrillation,With Facility To Print Ecg Through In-Built Thermal Printer,• Should Be Extremely Light-Weight (Less Than 10 Kgs) • Should Have Monitoring Facility Through Color Tft Display With Screen Size At Least 7” Or Better. • Should Have Both Synchronous And Asynchronous Mode. • The Defibrillator Should Be Biphasic Technology Based Having Energy Selection Of 2-300 Joules• It Must Be Capable Of Monitoring Ecg Through Ecg Cables, Multi-Function Electrodes And External Paddles. • The Machine Should Be Able To Defibrillate Adult, Paediatric Patients. • The Machine Should Have Ecg Wave Form Display On Bright Screen Along With Other Vital Numeric Information. • Should Be Able To Monitor Ecg• Should Have Facility For Auto Testing When Switched On And During Operations. • The Machine Should Be Compact, Portable With Built In Rechargeable Battery. • Should Have External Pacemaker With Fixed Or Demand Mode. • Should Be Able To Deliver A Maximum Of 300J In Aed Mode • Should Have A Minimum 2 Hours Battery Capacity For Monitoring And 1 Hour Battery Capacity For Giving Minimum Of 100 Shocks.• Energy Selectiononfront Panel Button And External Paddle Buttons • Charge Control On Front Panel Button And External Paddle Buttons • Charge Indicator Charging Tone, End Of Charge Tone, Led In Charge• Shock Control Buttons On The External Paddles • Should Have External Defibrillator Adult And Paediatric Paddles.• Charging Time - Less Than 8 Seconds At 300 J With A New And Fully Charged Battery • The Machine Should Have User Selectable Alarm Settings• The Machine Should Store At Least 24 Events For Viewing Or Recording.Ecg: • Should Be Able To Monitor Ecg Through 5-Lead Patient Cable • Should Be Able To Display Lead I,Ii,Iii, Avr, Avl, Avf And One Of The Chest Leads• Should Be Able To Monitor Heart Rate From 15-300 Bpmgeneral Specifications• The Machine Should Work On Mains As Well As Rechargeable Battery. • The Device Should Be Manufactured From An Iso Certified Organization• Machine Should Be Supplied With Standard Accessories• System Should Be Easy To Operate With Facility To Give Print Command, Charge And Energy Selection On Both External Paddles And On The Main Unit.• Should Have Upgradable Facility For Masimo Etco2.• Should Have Upgradable Facility For Spo2.• Should Have Upgradable Facility For Nibp.• Should Have Upgradable Facility For Pacer Also. , Multi Para Monitor With P, Nibp, Ecg Facility (Brand - Bpl/Maestros/Drager)) Technical Specifications For Multipara Monitor 1. Multi Parameter Patient Monitor, Which Is Suitable For Use In Operation Theatres, Icu & Wards. 2. Standard Configuration Of Ecg, Respiration, Spo2,( Oxyset+), Nibp (Suntech) Temperature. 3. Optional Parameter Etco2, Dual Ibp, Agm 4. Should Have 12-Inch Color Lcd Display. 5. Should Have Dual Modes Of Operation: Rotary Knob. 6. Should Display 7 Waveforms Or More 7. Waveform Colour Can Be Changed From Screen Setup Of The Corresponding Layout Screen. 8. Ecg: ? Should Be Able To Monitor Ecg Through 5-Lead Patient Cable ? Should Have Manual St Analysis Window ? Should Detect 20 Arrhythmias And Generate Alarms. ? The Priority Of Arrhythmia Alarms Can Be Configurable ? Should Measure Pvc & Pac ? Should Be Able To Monitor Heart Rate From 10-300 Bpm ? Should Have User Selectable Modes Like Monitor, Surgery And Diagnosis For Operation In Icu, Ot’S Etc ? Should Have Pacemaker Detection Facility 9. Respiration: ? Measurement Range Of 0 To 150 Breaths Per Min ? Should Have Gain Selection: ×0.25, ×1, ×2, ×4 ? Should Have Sweep Speed Selection Of 6.25Mm/S, 12.5Mm/S, 25Mm/S ? Should Have Apnea Detection Facility ? Apnea Monitoring Limit Range: 10S, 15S, 20S, 25S, 30S, 35S, 40S, 45S, 50S, 55S, 60S 10. Spo2: ? Should Have Nellcor Technology ? Should Have Measurement Range Of 0~100 % ? Should Have On Screen Display Of Numeric Value For Spo2, Pr With Signal Strength Bar And Plethysmograph ? Should Be Able To Select Sat Sec To Avoid False Alarm 11. Nibp: ? Must Be Of Suntech Medical Technology For Clinical-Grade Blood Pressure Measurement ? Should Have Auto, Manual, And Stat Modes Of Operation For Nibp. ? Should Have A Measuring Range Of 0-280 Mmhg 12. Should Have 2 Channels For Temperature Monitoring 13. Should Have Data Storage Capabilities: O 72 Hours Of Trend Data Storage. 2000 Sets Of Nibp Measurement Data. O 200 Alarm Events O Physiological Alarms Can Be Reviewed With 16 Sec Of Associated Waveform Along With Other Parameter Values. Even Print Out These Waveforms With Optional Recorder O 7 Leads Of Ecg Waveform Disclosure At Least Of 1-Hour O Should Have Facility To Transfer The Trend Data To Usb 14. The Monitor Should Have Drug Dose Calculator And Oxy-Crg View Screens 15. Snapshot Facility With Usb Transfer. 16.Should Have Alarm Settings For All Parameters. 17.Should Have Color Coded Alarms And Alarms Priority Can Be Configurable. 18. Should Have Cns Connectivity Of Same Make. , Fully Functional Automatic Dental Chair With Inbuilt Suction And Compressor (Brand- Confident / Chamundi) Programmable Dental Chair, Unit Fitted With Floor Mount Light With Led(Faro, Maia) Operating Light Having, On/Off And Intensity Control By Non-Touchsensor Monitor Mounting Arm High And Low Vacum Motorized Crs Suction System Autocalvable 2 Nos Beecool Ii Light Cure Cordless-1 No Modular Trolley System Over The Patient Airotor Points- 2 Nos Supreme Micromotor 35,000Rpm With Digital Display Of Speed Three Way Syringe- 1 Nos Supreme Optic Scaler With Five Scaling Tips With Endo Chuck 1 No Ss Instrument Tray X-Ray Viewer Multi Function Foot Control Comfort Dental Operators Stool Compressor Monobloc Oil-Free Medical Grade Airotor Air Compressor 1.5/2 Hp With Radiator Cooler, Condensor, Silicon Column Filter For Moisture, Dust Filter Microbial Filter Fitted On Ms Tank. , Dental Aerotor(Brand - Nsk) Push Button With Led Light , Dental Micromotor Contrangle(Brand - Nsk) Latch Type , Dental Micromotor Straight With Led Light (Brand - Nsk) , Round, Straight Surgical Bur For Straight Hand Piece Micromotor Carbide Burs(Brand - Nsk/Prima) , Round, Straight, Inverted Cone And Tapered Fissure Burs For Aerotor Diamond Fg (Brand- Dent Ark) , Rotary Files Niti Files Sx, S1 S2 F1 F2 And F3 (Brand- Dent Ark /Nsk) , Ultraound Color Doppler System (Brand -Samsung Hs30/ Ge Logiq / Mindray Mx7 (3D,4D)/Bpl) Technicalspecification 1. The Units Should Be Latest State Of The Art Digital Color Doppler With Broadband Beam Forming For Cardiac, Abdominal,Vascular And Ob/Gynapplication. The Models With Following (Or Higher) Specifications Need To Be Quoted. 2. The Machines Should Be Usa Fda And European Ce Certified And Should Be Latest In Technology And Launched In 2016 Or Later. The Manufacturing Company Should Be Iso Certified. 3. They Should Have At Least 750000 Digital Processing Channels For High –Resolution Imaging. 4. Imaging Modes : 2D, M- Mode, Color Flow Imaging, Pulse Doppler, Power Doppler, Continuous Wave Doppler And Directional Color Flow Mapping, 3D/4D Imaging Modes 5. The Machine Should Be Supplied With Dedicated 3D/4D Package 6. The Machines Should Have Facility For Simultaneous Dual/ Duplex/ Triplex Mode Display 7. Tissue Harmonic Imaging Should Be Available On All The Transducers. 9. Machines Should Be Capable Of Advanced Real Time Compound Imaging. 10. Should Have Frame Rate 1500 Fps Or More 11. Scanning Depth Should Be 40 Cms Or More 12. High Dynamic Range Of 250 Db Or More. 13. The Machines Should Have 256 Grey Shades (8 Bit) Or More. 14. One Touch Image Optimization Should Be Available In 2D Mode With One Button Automatic Adjustment Of Tgc And Receiver Gain And Compression Curve Based On The Range Of Detectable Tissue Signals. 15. There Should Be One Button Automatic Adjustment Of Doppler Prf, Baseline, Dynamic Range And Gain In Doppler Mode. 16. Pulsed Wave Doppler Should Be Available On All Imaging Transducers With Adjustable Sample Volume Size, Simultaneous Or Duplex Mode Of Operation, Simultaneous, 2D, Colour Doppler, Pulsed Doppler, High Prf Capability In All Modes Including Duplex And Triplex And Automatic Adjustment Of Scale And Baseline. The System Should Have Option To Adjust The Color Flow Mode For High Or Low Flows In One Touch. 17. Machines Should Support Broad Band/ Wide Band High Density Probes Spanning With Frequency Range From 1-20 Mhz (+/- 1 Mhz). The System Should Support Latest Technology Single Crystal Probe Or Matrix Array Probes For Better Resolution And Penetration. 18. Automatic Doppler Analysis Should Be Available With Automatic Real Time Calculation Of At Least Sixof Following User Selectable Parameters Peak Systolic Velocity End Diastolic Velocity, Mean Diastolic Velocity, Volume Flow, Time Average Mean Velocity, Time Average Peak Velocity, Resistive Index, Pulsatility Index, Systolic/ Diastolic Ratio, Acceleration/ Deceleration Times. 19. The Machine Should Have Up To 500000 Images Storing Facility And Cine Loop Review Facility With Memory Up To Minimum Of 25,000 Frames 20. The Machines Should Have Facility Of Direct Storage And Retrieval Of B/W And Color Images (Both Frozen And Cine Loop) In The Inbuilt Hard Disk Drive. In Built Hard Disk Storage Should Be Equal To Or More Than 1Tband Solid State Device In Addition With Capacity 120Gb. 21. The Machines Should Support Four Or More Transducers With Universal Ports Allowing Any Transducer To Be Connected To Any Port. 22. Machines Should Have A High Resolution Fully Articulating Non-Interlaced Flicker Free, Anti-Glare Led Display Of 21 Inches Or More With Resolution 1,920X 1,080 Or Better.In Addition, The Machine Should Have 10” Or More Touch Control Panel For Easy Access. 23. The System Should Have Image Enhancement Options Like Speckle Reduction, Spatial Compounding And Filtered Tissue Harmonics. The System Should Have Adaptive Blending Color To Maintain The 2D Resolution While Working In Color Mode. 24. Zoom Facility (Upto 8 Times Or More Magnification) With High Resolution Results And Pan Capacity In Both Real Time And Frozen Images. 25. The System Should Have Cd-Dvd And Usb Archival (Dicom And Pc Format).There Should Be 4 Or More Usb Ports. 26. Machine Should Be Offered With The Following Broadband Probes (I) Cardiac Package Along With Adult Phased Array Transducer With Frequency Ranging 1.0 - 5.0Mhz (+/- 1.0Mhz). (Ii) Convex Transducer Frequency Ranging ( C1-6Ct) Mhz. (Iii) Liner Transducer Frequency Ranging (L3-12T ) Mhz (Iv) Tvs Transducer Frequency Ranging (Ec3-10T) 27. Online 1Kva Upsand Color Inkjet Printer 28. Preference Would Be Given To Products Manufactured In India, Japan, Korea, Europe, Us. , Laproscopic Surgery Set With Hysteroscope And Resectoscope (Brand Ethicon/ Mindray Medical Pvt Ltd/ Karl Storz/ Conmed/Olympus) Unit And Camera Head The System Should Have The Full Hd Resolution-1920 X1080 Internal Medical Grade Recorder For Capturing Full Hd Videos And Full Hd Stills With Storage Capability Internal Of 50 Gb Or External Medical Grade Recorder Should Be Provided From The Same Manufacturer. System Should Have The Facility Of Controlling The Recording Device From The Camera Head. Video Scopes Can Be Connected To The Same. The Camera System Should Be Able To Provide With 1080 P Lines For Hd Resolution Image. Technical Specifications: Image Sensor: 1 Xcmos Agc: Microprocessor Controller Weight: 130Gm Focal Length: 16Mm Control Buttons: 3 (2 Of Them Freely Programmable) Input: Keyboard Input For Character Generator. Power Supply:-100-240 Vac 50/60 Hz Certified To: Iec 601-1, 601-2-18, Csa 22.2 No. 601, Ul 2601 And Ce According To Mdd, Protection Class1/Cf 2 High-Definition Medical Grade Monitor Led Crystal Display. Max. Resolution Of 1920X1080. Screen Diagonal - 27Inches Desk Top With Pedestal. Should Have The Facility Of Pip Mode. Accessories External 24Vdc Power Supply, Mains Cord, Pedestal. Certified To: En 60601-1, Protection Class Ipx 1 Led Light Source With Fiber Optic Cable Color Temperatures 6400K External Light Source Light Outlets - 1 Light Intensity Adjustment: - Continuously Adjustable Manually From Light So Should Be Supplied With Light Cable, Diameter 4.8Mm, Length 250Cm. Certified To :- Iec 601-1 & Ul 544 Ce According To Mdd, Protection Class 1/C Telescopes Forward Oblique 30 Degree Telescope, Diameter 10 Mm, Autoclavable, Length Optic Light Transmission Incorporated. Forward Oblique 30 Degree Telescope, Diameter 5 Mm, Autoclavable, Length 2 Optic Light Transmission Incorporated Co2 Insufflator Technical Specifications: Gas Flow: 0-400 L/Min Cv 625 Laprascopy Set Pressure: 0-30 Mmhg (4000Pa). High Flow Mode (0 To 40 L/Min.) Sensitive Mode Pressure 15 Mm Hg & Flow 15 L/Min For Sensitive Application Electronic Control And Colour Touch Screen, Following Data Are Displayed On Touch Screen: -Insufflation Mode. Set Value Pressure (0-30 Mmhg). Current Patient Pressure. Set Value Gas Flow (0-40 L/Min). Current Gas Flow. Gas Consumption (0-999 1). Reusable Insufflation Tube For Co2 Gas Up To Patient Body. High Flow Mode With Flow Performance Up To 40 L/Min. Easy And Intuitive Use With User Friendly Color Touch Screen 7 Inch For Easy And Precise Setting Of Set Values For Pressure And Flow And Of Insufflation Mode, As Well As For Clear Display Of Corresponding Set Values And Actual Values. Optical And Acoustic Alarm Signals In The Event Of Patient Overpressure Should Have Hose Pipe. Equipment Cart From The Same Manufacture Should Be Quoted With 4 Or More Helves Isolation Transformer Co2 Cylinder Holder Laparoscopic Instruments- Detailed Description • Veress Pneumoperitoneum Needle With Spring Blunt Stylet, Luer-Lock, Length 13 Cm & 15 Cm –2 Nos • Trocar, Size 11 Mm, Color Code: Green, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel, With Washers Pack Of 10 – 4 Nos • Trocar, Size 6 Mm, Consisting Of: Trocar Only, With Pyramidal Tip Cannula Without Valve, With Insufflation Stop-Cock, Length 10.5 Cm Multifunctional Valve, Three Part Dismantel With Washers Pack Of 10 – 4 Nos • Reduction Sleeve, 11/5 Mm – 1 Nos • Reducer 11/5 Mm– 1 Nos • Telescope, Diameter 10 Mm, Length 32 Cm, Autoclavable, Variable Direction Of View From 0°-90, Adjustment Knob For Selecting The Desired Direction Of View, Fiber Optic Light Transmission Incorporated- 1 Nos •Injection Needle, Luer-Lock, Diameter 1. 2 Mm, Size 5 Mm, Length 36 Cm - 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 3 6 Cm, Right Angled, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert, And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Long, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Dissecting- And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Alligator Jaws, Double Action Jaws, Consisting Of: Plastic Handle Without Ratchet, With Larger Contacact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Siz E 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Jaws With Multiple Teeth, Fenestrated, Long, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, 2 X 4 Teeth, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle With Manhes Style With Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Bowel Grasper, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Double Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube, Insulated., Three Parts Dismantle 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Cleaning, Single Action Jaws, Atraumatic, Fenestrated, Curved, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet Metal Outer Sheath, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Three Piece Laparoscopic Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Atraumatic, Fenestrated, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Insert And Outer Tube, Three Part Dismantel. 1 Nos • Three Plece Laparoscopic Dissecting And Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, Heavy, Double Action Jaws, Consisting Of: Plastic Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel – 1 Nos • Three Plece Scissor, Rotating, Dismantling, Insulated, With Connector Pin For Unipolar Coagulation, With Luer-Lock Connector For Deaning, Double Action Jaws, Curved, Length Of Blades 15 Mm, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Insulated, Without Ratchet Metal Outer Sheath, Insulated Scissors Insert For Use With Trocars Size 6 Mm Three Part Dismantel 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) 1 Nos • Three Piece Laparoscopic Hook Scissors, Rotating, Size 5 Mm, Length 36 Cm, Jaws Not Crossing With Connector Pin For Unipolar Coagulati On, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area, Outer Tube, Insert, Three Parts Dismantel 1 Nos • Three Plece Laparoscopic Autoclavable Grasping And Dissecting Forceps, Single Action Jaws, Fenestrated, 360 Degree Rotational Sheath, Size 5 Mm, Length 36 Cm, Long, Ergonomic Metal Handle With Plastic Finger Rings With Larger Contact Area At The Finger Ring To Avoid Pressure Sores, Can Be Dismantled With The Press Of A Button. 1 Nos • Suction And Irrigation Tube, Anti-Reflex Surface With Two-Way Stopcock, For Single Hand Control, Size 5 Mm, Length 36 Cm 1 Nos • Olsen Suction Or Irrigation Tube, With Protection Basket, With Trumpet Valve, Size 10Mm Length 36Cm. 1 Nos • Dissecting-Electrode, L-Shaped, Size 5 Mm, Length 36 Cm, With Connector Pin For Unipolar Coagulation, Consisting Of: Outer Tube, Insulated Plastic Handle Electrode L-Shaped With Trumpet Handle 1 Nos • Coagulating And Dissecting Electrode, L-Shaped, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Coagulating And Dissecting Electrode, Spatula-Sheaped, Blunt With Connector Pin For Unipolar Coagulation, Size 5 Mm, Working Length 36 Cm 1 Nos • Macro Needle Holder, Ergonomic Axial Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Left Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Macro Needle Holder, Ergonomic Pistol Handle With Disengage Able Ratchet, Ratchet Release On The Right Side, Right Curved Jaws, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm 1 Nos • Dismantling Needle Holder, Ergonomic Pistol Grip With Disengage Able Ratchet, Ratchet Release On The Left Side, Jaws Curved Left, With Tungsten Carbide Insert # 5 Mm, Length 33 Cm Consisting Of: Insert, Outer Tube, Handle 1 Nos • Unipolar Hf Cord With 4Mm Banana Plug And Length 300 Cm 1 Nos • Clip Applicator, For Use With Ethicon Titanium-Clips Lt-300 (Medium Large), Dismantling, Rotating, With Ratchet To Lock The Jaw Part Holding The Clip, Size 10 Mm, Length 36 Cm, Consisting Of: Metal Handle, With Ratchet Metal Outer Tube Insert, Three Part Dismantel, 1 Nos • Claw Forceps, Rotating, Size 10 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Metal Handle, With Manhes Style Ratchet Outer Tube, Insulated Forceps Insert, Three Part Dismantel. 1 Nos • Claw Grasping Forceps, Rotating, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 36 Cm, 2 X 3 Teeth, Single Action Jaws, Consisting Of: Plastic Handle, Without Ratchet, With Larger Contact Area Outer Tube 1 Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Especially Suitable For Dissection, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1Nos • Rotatable Bipolar Grasping Forceps, Rotating, Dismantling, With Connector Pin For Bipolar Coagulation, Double Action Jaws, Fine Atraumatic Serration, Fenestrated, Size 5 Mm, Length 36 Cm Consisting Of: Plastic Handle, Without Ratchet, Color Code: Light Blue Outer Sheath Forceps Insert, Three Part Dismantel. – 1 Nos • Bipolar Hf Connecting Cable Length 300 Cm, Compatible With All Standard Cauteries – 1 Nos • Fascial Closure Instrument For Sub Cutaneous Ligature Of Trocar Incisions – 1 Nos • Myoma Fixation Instrument, Screw Shaped, 5 Mm. – 1Nos • Dismantling Fan Retractor, Distendable, Size 5 Mm, Length 36 Cm.- 1 Nos • High Frequency Needle, For Splitting And Coagulation, Insulated, Retractable, With Connector Pin For Unipolar Coagulation, Size 5 Mm, Length 31 Cm. 1 Nos • Single Use Scissor Insert Pack Of 10 (1X10) - 1 Nos • Uterine Manipulator: Uterine Manipulator For Providing Tissue Tension Needed For Anatomical Surgery. The Manipulator Should Have Application In Tlh, Lash, Lavh And Hysterectomies For Malignant Pathologies 1 Nos • Sterilization Tray For 2 Telescopes (Same Manufacturer) • Sterilization Tray For Instruments (Same Manufacturer) Hysteroscopy Set Hysteroscope Sheath For Diagonostic Continuous Irrigation Size 6.1-6.3Mm Outer Sheath And 5.1-5.3 Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. Hysteroscope Sheath For Operative Continuous Irrigation Size 5.9-6.1Mm Outer Sheath With Operating Channel 5Fr, Leur Lock Adaptor And 5.3-5.5Mm Inner Sheath For Use With 4Mm Hysteroscope Telescope. With Stopcock & Leur Lock Adaptor And Inflow And Outflow Channe Semi Rigid Instruments For Use With Operating Hysteroscope Scissors Semi Rigid, Blunt Tips, 5 Fr., Length 36-40Cm, Single Action Jaws Scissors Semi Rigid, Pointed Jaws, 5 Fr., Length 36-40Cm, Single Action Jaws, Semi-Rigid Biopsy- And Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Tenaculam Grasping Forceps Semi Rigid, 5 Fr., Length 36-40Cm, Double Action Jaws Bipolar Vaporization Electrode, Semirigid, 5 Fr., Needle Electrode Angled 90°, Length 42Cm Bipolar High Frequency, Should Fit In Most Of The Standard Electrosurgical Unit Having Bana Plug One Side, Length Should Be Not Less Than 250Cm Telescope 12, Enlarged View, Diameter 4 Mm, Length 30 Cm, Autoclavable, Fiber Optic Light Transmission Incorporated Bipolar Working Element To Be Used With 26 Fr Resectoscope Sheath: Motion By Means Of A Spring. The Thumb Support Is Movable. Return Of The Loop Is Control By The Thumb And In Rest Position The Electrode Should Rest Inside The Operating Sheath, To Be Used With 4Mm Hysteroscopy Telescope. Should Work In Saline Bipolar Cutting Loop 24 Fr Should Work In Saline Cutting Electrode 24Fr, Bipolar, Pointed, Should Work In Saline Coagulating Electrode 24Fr, Bipolar, Ball End Should Work In Saline Continuous Flow Resectoscope Sheath 26 Fr., For Bi-Polar, Including Connection Tubes For And Outflow, 2 Luer-Lock Adaptors, 26Fr, Oblique Beak, Rotating Inner Tube, With Ceramic Insulation, For Use With Working Element. Should Work In Saline Obturator, For Use With The Resectoscope Sheath. Fluid Management System (Irrigation & Suction Unit) Pressure Regulated Suction And Irrigation System For Use In Laparoscopy And Gynaecology Unit Should Have Touch Screen As User Interface. Unit Should Have Feature Of Automatically Fixing Maximum Parameters For Laparoscopy And Hysteroscopy Mode By The Choice Of Tubing Unit Should Have Feature Of Simultaneous Display Of Set Values And Actual Values Enabling User For Continuous Monitoring Of Suction And Irrigation Parameters Unit Should Have Feature Of Use Of Disposable/Reusable Cassette Tubing Set For Laparoscopy/Hysteroscopy Procedures. Unit Should Be Supplied With Glass Suction Bottle 5 Lite Unit Should Have Pressure Settings: Hysteroscopy Mode: 0-200 Mmhg Laparoscopy Mode: 100/300/500 Mmhg Unit Should Have Flow Settings: Hysteroscopy Mode: 200/400/600 Ml/Min Laparoscopy Mode: 0-1300Ml/Min Suction Pressure Regulated: Hysteroscopy Mode: 0.1-(-)0.8Bar (-80Kpa) Laparoscopy Mode: 0.1-(-)0.8Bar(-80Kpa) Power Supply: 100-240Vac, 50/60Hz Certified To: Iec 601-1, Ce Nach Mdd Certified To: Iec 601-1, Ce Acc. To Mdd Note: - All The Above Items Should Be Usfda And European Ce Certified And From Same Manufacturer For Better Compatibility And Maintenance , Integrated Electrosurgical Unit And Vessel Sealer Brand -Ensurge/ Hti Digital / Kls Martin / Enertech/Shalya Specifications For Integrated Electrosurgical Unit And Vessel Sealer 1) Advanced Electro Surgical Unit With Vessel Sealing System Have Mono Polar Cut & Coagulation, Bipolar And Vessel Sealing Technology, All Integrated In Single System 2) Type Of Display Should Be Lcd Touch Screen 3) Display Size Should Be 5” Or More 4) Unit Should Have Microprocessor-Controlled Tissue Feedback Technology. 5) The System Should Have Capability To Convert Electrical Energy To Radio Frequency Energy Thus Providing Radio-Frequency Seal 6) Number Of Tissues Sensed Per Sec Should Be 4000 Or Higher 7) Vessel Fusion System Must Be Able To Seal Artery, Veins Along With Tissue Bundle Up To & Including 7Mm In Diameter & Sealed Vessels Should Be Able To Withstand At Least 3 Times The Systolic Blood Pressure. 8) Low Frequency Leakage Should Be 50 Or Higher (In Ma) 9) High Frequency Leakage (Rf) Must Be Less Than 100Ma In Mono Polar And Vessel Sealing Mode And Less Than 70Ma In Bipolar Mode 10) Should Be Provided With Rs 232 Data Input Port For Software Upgrade Facility 11) System Must Have Recall Facility To Recall The Last Setting Used By User Before Turning Off The Power Directly Or Through User Programs. User Can Use Pen Drive With Their Setting To Recall The Setting Saved By Them. 12) System Should Have Bipolar Resection Including Under Water Cutting. 13) The System Should Be Provided With Twin Monopolar Socket (Only One Socket To Be Activated At A Time) With Independent Power Setting 14) 5 Or More Numbers Of Cutting Modes Available In Monopolar 15) Maximum Power Should Be 400W Or Higher 16) Maximum Power Of Blend Mode For Cutting With Homeostasis Should Be Not Less Than 250W 17) Fulgurate/Forced Mode, Spray Mode, Soft Mode Of Monopolar Coagulation Should Be Available. 18) Unit Should Be Supplied With 4 Or More Nos. Of Monopolar Coagulation Modes 19) Coagulation Mode Power (Monopolar) Should Be 150W Or Higher 20) Coagulation Mode Power (Bipolar) Should Be 120W Or Higher 21) Number Of Bipolar Cutting Modes Should Be Or Greater Than 5 22) Maximum Power For Ligation Not Less Than 100W 23) Maximum Power For Resection Not More Than 300W 24) Equipment Should Have On Screen Review Of Error Codes And Diagnostics. 25) System Should Have Patient Plate Contact Quality Monitoring System Giving Audio-Visual Alarm And Deactivating Output If Contact Between Patient And Patient Plate Is Not Proper To Eliminate The Risk Of Patient Burns. It Should Be Mandatory, Should Have Contact Quality Monitoring With Split Style Patient Return Electrode And Deactivates Output If Contact Between Patient And Patient Return Electrode Is Not Proper To Eliminate The Risk Of Patient Burns, Manufacturing By Same Oem 26) Auto Bipolar Start And Stop Along With User Configurable Auto Start Facility Should Be Available 27) Power Output Of Vessel Sealing System (Vss) Not More Than 150W 28) Vessel Sealing System Should Be Able To Seal Vessels Or Tissue Bundles Faster Than Any Conventional Devices (Preferably Within 2-4 Seconds) 29) Product Should Be Ce Certified (4 Digit Notified Body). 30) It Should Have Iec-60601-1-1, Iec 60601-2-2 Safety And Design Standards Certification & Iso 9001: 2008 & Iso 13485:2003 Certified Company. 31) Warranty Of The Unit Should Be 5 Years 32) It Should Be Supplied With All Following Accessories, Should Be Reusable And Autoclavable: - O Patient Return Electrode --- 1 No. O Cable For Return Electrode --- 1No. O Hand Switching Pencil --- 1 No. O Foot Switching Pencil --- 1 No. O Double Pedal Footswitch With Toggle Function (Common/Individual For Monopolar, Bipolar And Vessel Sealing) - 3 No. O Universal Adaptor --- 1 No. O Bipolar Forceps --- 1 No. O Cable For Bipolar Forceps --- 1 Nos. O Set Of Electrode (Angled, Ball And Needle) ------ 1No. O Reusable Sealing Clamp With Cable--- 1 No. O Curved Jaw Vessel Sealer 5 Mm, 32 To 37 Cm -- 1 No. O Autoclavable Reusable Cutting Instrument – 1 No. Additional Terms & Conditions: 1. Vessel Sealing Laparoscopy Instruments Should Have Both Hand And Foot Activation Mode And Should Be Eu Ce (4 Digit Notified Body Certified) Or Usfda Approved. 2. All Sockets Should Be Of Blinking Light Type When In Use To Identify The Used Mode. 3. R.F. Frequency Should Be In Between 350-500Khz For All Modes. 4. It Should Have Bipolar Rf Scalpel Mode For Dissection & Desiccation. Rf Bipolar Scalpel Instruments Should Have Hand Control Button For Coagulation & Cut. 5. Equipment Should Be Usfda Approved/ Eu Ce (4 Digit Notified Body Certified). It Should Have Iec-60601-1- 1, Iec 60601-2-2 Safety And Des , Ctg Machine Brand - Bpl/Maestros/Bistos Specification Foetal Monitor With Display And Printer Should Have 12.1” High Resolution Colour Tft Display With Tiltable Screen For Better Viewing. Should Display Fhr, Toco, Foetal Movementin Numeric Values . Should Display 2 X Fhr And Toco Graphs In Different Colours. Should Have The Facility For Data Save With Play Back & Print Facility Should Have Facility To Monitor Information Of Last 25 Hours Should Have Special High Sensitive Watertight Probe For Better Durability Should Have The Low Ultrasound Power For The Safety Of The Foetus Should Have Automatic Foetal Movement Detection Should Have Event Marking Facility By Mother And User Thermal Printer With Minimum 152Mm Paper Width Is Essential For Broader Printouts Standard Configuration Should Be Fhr, Toco, And Foetal Movement Should Have Volume Control For Fhr Beep Sound And Alarm. Should Have Alarm Setting For Weight Should Be Less Than 4 Kg For Easy Portability. Should Have Foetal Stimulator Built In To Fhr Probe And Activation Key Should Be There On The Front Panel. Stimulation Should Be Recorded On The Recording Paper And Should Be Displayed On The Screen. Built In Rechargeable Li-On Battery For Backup Should Work With Input 200 To 240Vac 50 Hzsupply Central Monitoring System Software Upgradability Should Be Possible (Optional) Should Be Supplied With The Following Standard Accessories: Power Cord- 01 Fhr Probes – 01 Nos Toco Probe -01 Patient Event Marker Belts – 02 Nos Gel – 1 Bottle Thermal Paper- 02 No , Digital Video Colposcope Brand - Bpl/Maestros/Bistos Specification 1. Should Have Led Cold Lighting System Reproduces An Original View Of Tissue. 2. Led Lights Are Replaceable. 3. Should Have Advanced And Fast Auto-Focusing System To Ensure Clear Image. 4. Should Have Remote Capture Control And User-Friendly Keyboard Layout For One Handed Operation. 5. Should Have Electronic Green Filter That Enhances Vascular Image Display Without Compromise Of Illumination. 6. Should Have Working Distance Of 6.7 - 11.8 (170 - 300 Mm). 7. Should Have Magnification Of 1X - 36X. 8. Should Have Resolution Of 3,80,000 Pixels Or More 9. Should Have Horizontal Resolution Of > 470 Lines. 10. Should Have Field Of View Of 0.4 - 5.9 (10 - 150 Mm). 11. Signal/Noise Ratio Should Be = 50 Db. 12. Should Have Signal Output Of S-Video, Pal/Ntsc. 13. Should Have Acetic Acid And Iodine Reaction Test Timer To Precisely Detect Low/High Grade Cin. 14. Should Have Real-Time Display Of Magnification. 15. Should Have Powerful Colposcopic Findings Gallery For Comparison Analysis. 16. Should Have R-Way Evaluation Program Supports Cervical Disease Diagnosis Guidance For Clinical Users. 17. Should Have Dicom 3.0 Supportive. 18. Should Be Manufactured By An Iso Certified Company , Vessel Sealing Device For Open Surgery Shaft Length-23Cm Curved Tip (Box Of 6)(A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology. Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A} Curve Jaw Vesselsealer B) Should Be Able To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. C) Sealing Should Withstand 3 Times Systolic Pressure. D) Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 23 Cm; Shaft Diameter 5 Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. Technical Specification For , Vessel Sealing Laparoscopic Surgery, Shaft Diameter-5Mm, Length-37 Cm Jaw Type Curved Jaw Double Action With Contoured Tips, Shaft Rotation 350 Degrees, Jaw Surface-Textured Ceramic Stops.Jaw Aperture-13Mm Seal Plate Length- 20.3(Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Blunt Tip Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Sealing Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm D) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness:Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. E) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Instrument For Open Surgery, Instrument Length 20.6Cm-21 Cm, Curved Jaw, Hand And Foot Switching(Box Of 6). Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Exact Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 21 Cm. D) Curved Jaw In 28 Degrees, Seal Length 19.3Mm, Cut Length: 18.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device Laparoscopic Surgery. Shaft Diameter-5 Mm, Maryland Jaw Curved Device Length 37Cm (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Curved Jaw Vessel Sealer Hand Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec B) Sealing Should Withstand 3 Times Systolic Pressure. Scaling Length 20 Mm; Cutting Length 18 Mm, Shaft Length 37 Cm; Shaft Diameter 5 Mm C) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation D) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Vessel Sealing Device For Open Surgery With Shaft Length 18.8 Cm, Jaw Type-Curved Jaw (Box Of 6) Brand - Enertech/Ensurg/Hti Digital/ Kls Martin A) Small Jaw Open Instrument Working Based On Tissue Impedance Sensing Technology, Capable To Seal Any Vessel Of 7 Mm Diameter With Automatic Sealing Time 2-4 Sec. B) Sealing Should Withstand 3 Times Systolic Pressure. C) Instrument Length Should Be 18.8 Cm. D) Curved Jaw In 28 Degrees, Seal Length 16.5Mm, Cut Length: 15.5Mm E) Jaw Surface Should Be Nano Coated For Faster Cooling And Less Stickiness; Jaw Temperature Should Not Exceed 91 Degrees Celsius After Multiple Activation. F) It Should Have Cable With Rf Id And Compatible With Existing Rf Generator. , Ethelene Oxide Sterlization Machine ( Brand - Steri Techno Fab/ Map Industries) 1) Eto Gas Sterilizer Should Be Fully Automatic Type With Software-Controlled Operation System For Low Temperature Sterilization Of Heat And Moisture Sensitive Medical And Surgical Items. 2) The Chamber Should Be Preferably Rectangular With Capacity Of 250 Litters Or 9 Cu. Ft. & Dimension 48”(L) X18”(W)X18”(H). 3) The Operating System Should Be Programming Logical Controller Based And Should Have Touch Screen Human Machine Interface From Where User Should Operate And Observe The Cycle . 4) The Inner Surface Should Be Smoothly Finished To Minimize Gas Deposits. 5) Manufacturer Should Provide The Test Report To Prove Conformity To Specification And Ability Of Eto Unit To Achieve Complete Pathological/Microbiological Elimination. The Test Of Report Has To Be Attached With Technical Bid Document. 6) Surface Heaters Should Mount On The Chamber For Uniform Temperature In Chamber Throughout Cycle. 7) Less Noisy And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 8) The Machine Should Be Provided With Plc Based Automation Along With Lcd Hmi Which Allows The Operator For: (A) Change And Set The Parameters (B) Run The Cycle According To Pre-Selected Cycles. (C) Monitor Various Phases / Individual Parameters During The Process. (D) View On/Off Status Of The Various Components Of The Machine While The Cycle Is In Progress. 9) It Should Have Password Protection For Unauthorized Access & Analogue Input Of Process Pressure/Vacuum. 10) It Should Have Digital/Analogue Input For Temperature & Temperature Should Be Indicated In The Sterilization Area, By The Use Of A Temperature Sensor. 11) One Pressure/Vacuum Sensor For Display Of The Current Pressure/Vacuum, That The Load Should Be Subjected To, At All Times During The Process. 12) The Software Should Provide & Maintains Total Records Required For Process Parameters During The Sterilization Cycle. These Records Are Necessary For Meeting Ce Or En 1422 Norms Of Sterilization. 13) All The Fittings For The Accessories And The Main Vessel Should Be Fabricated From Ss 304 Stainless Steel. All The Valves Used In The Process Lines Should Be Ss 304/Brass/Teflon Construction Ball Valves. (All Standard Makes) 14) Pressure Testing And Vacuum Testing As Per Specified Standards. (1.5 Times The Working Pressure) 15) Automatic Operations As Well As Manual Operations In Case Of Technical Problems Should Be In Plc/Hmi. 16) Machine Should Not Open During Sterilization Process, It Should Be Open Only After Complete Cycle Of Sterilization. 17) It Should Be Plc Based Automation System. Plc Should Be Honeywell Or Siemens. System Should Be 21 Cfr Compliances. 18) Automation Should Be 7’’ Touch Screen Display Of Schneider Or Proface Or Equivalent. 19) The Construction Of Chamber Should Be Of Ss316 Grade Stainless Steel. 20) There Should Be Interlocks With Door Mechanism So Cycle Should Start Only After Closing Of Door. 21) Cartridge Puncture Operation Should Be Automatic Into The Chamber No Need Of Manual Puncturing. 22) In Case Of Cartridge Puncture There Should Be Alarm System. 23) One Complete Cycle Should Be Containing All Phases. Time Based Parameter Should Be Mention In Non-Editable Data Sheet. 24) Temperature, Pressure, Humidity, And Other Parameters Should Be Display In Hmi Screen. 25) It Should Be Noise Proof And Vibration Proof Vacuum Generator Should Be Provided For Vacuum Instead Of Vacuum Pump. 26) It Should Be In Built Aeration Phase To Remove Residual Gas Out From Sterile Item. 27) Pre-Requisite Sequence Phases Should Define To Run Cycle In Auto Mode. 28) Pre-Sterilization Phases Should Define To Create Proper Condition For Sterilization (I.E. Humidity& Temperature). 29) Post-Sterilization Phases Should Define To Remove Residual Gas From The Product. 30) Machine Should Have Manual Override Operating Facility. 31) Accessories Needs To Be Supplied With Machine: - ? Suitable Air Compressor Of 1 Hp Capacity. Air Compressor Should Be Oil Free And Less Noisy As Compared To The Traditional Oil-Based Compressor. ? 1 Nos Wire Mesh Type Basket For Loading & Un-Loading Of Sterilization Materials. ? Manual Sealing Machine Suitable Medical Use Sealing. Machine Should Operate On 240 V/50 Hz Operated And Make In India Product. Eto Gas Cartridge Of 1 0 0 Grams- 1 0 Nos. Eto Cartridge Should Be Of Same Make Of Machine. Bidder Must Have To Attach Msds Sheet Of Eto Gas Cartridge With Bid Document. 32) The Manufacturer Shall Have Below Listed Certification To Prove His Eligibility And Copy Of The Certificates Should Be Enclosed With The Offer. ? Iso 9001:2015 For Quality Management System. ? Ce Certificate For Eto Sterilizer & Eto Cartridge Compliance With The Requirement Of Directive Council Directive On Medical Devices 93/42/Eec As Amended 2007/47/Ec. ? Quality Management System For Medical Devices Iso 13485:2016 For Eto Sterilizer & Eto Cartridge. ? Risk Management To Medical Devices Iso 14971:2007 For Eto Sterilizer & Eto Cartridge. ? Safety Requirements For Electrical Equipment For Measurement, Control, And Laboratory Use - Part 2-040: Requirements For Sterilizers And Washer Disinfectors Used To Treat Medical Materials Iec 610102-040:2020 & Iec 61010-1- 040:2020. ? As Eto Gas Toxic And Carcinogenic Properties Environment Management System Certificate. ? Medical Electrical Equipment Iec– Part 1-2: Requirement For The Basic Safety And Essential Performance Of Multifunction Patient Monitoring Equipment. ? Iso 45001:2018 For Occupational Health And Safety Management System. ? Iso 20857:2010 And Rohs Directive (2011/65/Eu) On The Restriction Of Use Of Certain Hazardous Substances In Electrical And Electronic Equipment. ? Fda & Who-Gmp Certificates To Prove Standard Of Manufacturing Practice , Ot Light ( Brand - Shalya/Mattrix/Surgident) Description Of Function Led Surgical Lights Illuminate The Surgical Site For Optical Visualization Of Small Low Contrast Objects At Verifying Depths In Incisions And Body Cavities. 1. General Requirements 1.1. The Light Shall Adopt Led Technology To Create A Homogenous Light Patch Without Emitting Any Infrared Rays. 1.2. The Light System Shall Be Dual Light Heads, One Major And One Satellite. 1.3. Light Should Have Electronic Focusing From Control Panels Without Any Motorized Or Mechanical Movement Of Light Panels. 1.4. All Dome Should Have 2 Colour Led Lamps, White (Cool White) & Amber (Warm White) To Achieve High Cri And Get The Required Shade Of Light As Per Different Surgical Requirements. 1.5. High Power Leds Of 5Watts & Above Should Be Used To Provide High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area <2 Deg. 1.6. Lights Should Have Higher Watts Leds To Achieve High Lumen To Watt Ratio Which Leads To Lesser Energy Consumption And Low Heat At Surgical Area. 1.7. Pulse Width Modulation-Controlled Led Driving To Ensure Less Heating Of Led Which Increases Life Of Leds And No Change In Light Colour Output And Light Colour Temperature Throughout Life. 1.8. The Major System Shall With Automatic Illumination Control System With Sensors On The Light Head. When Some Part Of Led Is Masked By Surgeon’S Head Or Shoulders, The Remaining Led’S Will Become Brighter Automatically To Compensate For The Losing Illumination. 1.9. Light Intensity Shall Be Adjustable Between 30% -100% And Should Have Low Intensity Light For Endoscopy Mode. Light Intensity, Light Field Diameter And Color Temperature Should Be Controlled From Electronic Touch Control Panel Mounted On Light Arm And Wireless Wall Mount Electronic Touch Control Panel. It Should Also Have Provision To Control The Intensity, Electronic Focus, Depth From Sterile Field Though Capacitive Touch Control Handles. 1.10. The Light Head Shall Be Of Petalled / Winged Shape To Avoid Obstruction To Laminar Flow On Surgical Field. 1.11. The Color Temperature Shall Be Synchronized & Controlled By Either Light Head Control Panel. 1.12. The Light Shall Be Mountable To Ceiling From Single Center With 360-Degree Rotation Of All Arms. Spring Arms Shall Be Rotatable At Least 360 Degrees Around Its Own Axis. Each Dome Head Should Be Rotatable With 360 Degree At Connecting Joint With Spring Arm And At Least 300 Degrees Around Its Own Axis. This Feature Should Be Applicable With A Camera Mounted Dome Also. 1.13. The Maximum Movement Angle Of The Spring Arm Shall Be At Least Up 45°And Down 50 1.14. The Thickness Of The Light Head Shall Be No More Than 70 Mm. 1.15. Each Led Shall Be Replaceable Individually To Save Cost In Case Of Failure, Instead Of Replacing The Module With Several Leds. 1.16. The Surgical Light Should Be Complete With All Components For Celling Mount And Electrical Feed-In, Including Finalized Installation. 1.17. Detachable & Auto Cleavable Handle (3 Nos.) For Each Light Should Be Provided. 2. Technical Requirements Of Both Domes: 2.1 It Should Have 2 Colour Led Lamps, White ( Cool White) & Amber( Warm White) 2.2 The Central Illuminance Should Be 160,000 Lux 2.3 Light Field Diameter Should Be Adjustable From 150Mm To 300Mm 2.4 D10: 300Mm & D50 :160Mm 2.5 Color Temperature (K), Adjustable From 3500-5000K 2.6 Color Rendering Index Ra Should Be 95 Or More And R9 Should Be 93 Or More 2.7 Depth Of Illumination (L1+L2) As Per Iec 60601-2-41 (Ver 2003) Should Be 650Mm And As Per Iec 60601-2-41 (Ver 2008) Should Be 1200Mm. 2.8 Dimming Range Should Be Between 25-100% 2.9 Endoscopy Mode Illumination Should Be Less Than 5% Of 160,000 Lux 2.10 Number Of Led Bulbs The Light Head Should Not Be More Than 70 2.11 Led Service Life Should Be Minimum 60000Hrs 2.12 Light Head Dimension Should Be 700Mm (=/- 20Mm) 2.13 Max. Power Consumption Of All Light Sources Should Be Less Than 100W At Maximum Setting. 2.14 Power Supply Should Be 100-240V Ac, 50-60Hz 2.15 One Dome Should Be Ready For The Wireless Camera Attachment. 3.Standards • Iso 9001:2008 • Iso 13485:2003, • European Ce With 4 Digit Notified Body / Eu Ce With Eu Free Sale Certificate /Us Fda Registered . • Should Compliance With: Iec 60601-1, Iec 60601-2, Iec 60601-2-41, Certificate From Any Nabl Accredited Lab / Any Lab From Country Of Origin For Imported Brands , Suction Machine (Electrical) (Brand -Supreme / Goley) Type: Electrical Pump Type: Oil Immersed Rotary Vane Capacity: High Vacuum Voltage: 220 Vac, 50 Hz, 1 Ph Number Of Wheels: 04 (Antistatic) Air Flow: 35 Ltrs/Min Current: 1.8A Noise (Decibel): 30~35 Dba Power Consumption: 370W Weight: 25 Kgs Flow Rate: 35 Lpm Vacuum Gauge: 100Mm Reservoir Volume: 5000Ml Tubing: Non-Collapsible Suction Tubing Max Vacuum: -720Mmhg Motor:½Hp, Fhp 100% Copper Winding Rpm: 1440 Jars: Polycarbonate 2X2.5 Liters Capacity Filter: Bacterial Filter Autoclavable /Reusable Suction Machine Should Be Is I Marked , Fully Automated Biochemistry Analyser Brand (Erba Transia/ Meril) Random Access System With Stat Capability. Analytical Principle Spectrophotometry & Photometry, Turbidometry Principles. Assay Type End Point, Rate, Fixed Point, Kinetic, Ise (Optional). On Board Parameter - Present. Programmable Tests - Present. On Board Cooling For Reagent Present. Through Put - 200 Test/Hour Or More, Continuous Loading Facility. Sample Types Serum, Plasma, Urine & Other Body Fluids. Sample Volume 0-70 Micro Litres (Approx). Sample Quality Analysis, Clot Detection & Probe Crash Protection - Present. Reagent Volume 10 Microlitre To 300 Microlitre (Approx.). Total Reaction Volume 90 Microlitre To 350 Microlitre. Reaction Cuvettes - Permanent Glass Cuvettes With On Board Laundry. Possibility Of Replacement Of Individual Cuvette. Photometric Range 0-3.0 Od. 15. Wavelength-340-800 With Minimum & Standard Wavelengths (340, 405, 505, 546, 578, 600, 700 Nm) Calibration Autocalibration, Cooled Calibration Position, History Of Graphical Calibration Data Stored. Quality Control At Minimum 4 Level Qc Plot Westgard Rules, Twin Plot, Levey Jennings Graph, Cooled Qc Position. Data Storage Of Patient Present Proper System Of Storage Minimum Water Consumption. Warranty 5 Years Warranty Power Back Up Facility For Instrument. Autopipettes To Be Provided With Instrument 10 Micro Litre (Fixed) 01 Nos. 1000 Micro Litre (Fixed) 01 Nos. 0-100 Micro Litre (Variable) 01 Nos. 0-500 Micro Litre (Variable) 01 Nos. 100-1000 Micro Litre (Variable) 01 Nos. Demo Kit With Instrument Reagents Kits Provided With Instrument: Creatinine, Urea Uric Acid, Triglyceride, Sugar Cholesterol, Tp, Albumin, Sgpt, Sgot, Alkaline Phosphatase, Bilirubin Instrument: Usfda Registered And Ce Ivd Approved , Cbc Machine Brand -(Accurex / Erba/ Meril) Measurement Principle Electrical Impedance For Counting Rbc Wsc & Plateletscolorimetric Estimation Of Hgb At 540 Nm Parameterswbc, Ly#, Mid, Gr, Ly%, Mid%, Gr, Rbc, Hgb, Hct, Mcv, Mch, Mchc, Rdw-Cv, Rdw-Sd, Plt, Mpv, Pdw, Pct, P-Lcr, P-Lcc Throughput- 60 Samples/Hour Micro-Aperturewbc: 100 ?M Rbc/Plt:68 ?M Sample Typewhole Blood Or Pre-Diluted Sample Sample Volumewhole Blood (Venous Blood): 10 ?Lpre-Diluent (Capillary Blood) : 20 ?L Chamberdual Chamber: Rbc/Platelets & Wbc/Hgb Reagents- 3 Reagent System: Diluent, Detergent & Lyse (Non-Cyanide) Measurement Range Linearity Range Acceptable Limits Wbc0x10/L-10.0×109/L<= Plus/Minus 0.3 * 10 ^ 9 / L 10.1×109/L-99.9×109/L 0X102/L-1.00×102/L <= (Plus/Minus 5)%<= Plus/Minus 0.05 * 10 ^ 12 / L Rbc 1.01X102/L-9.99X102/L<= (Plus/Minus 5)% Quality Control - 4 Qc Options: L-J, X-B, X-R & X Qc Graphs Plotted With 31 Data Points Data Memory - Upto 100,000 (With Histogram) Display - 10.4 Inch Color Lcd With 640 * 480 Resolution Printer Built-In Thermal Printer Interface:Support Rs-232C, Standard Network Port And Usb; Keyboard And Mouse Operating Environment - Temperature: 15°C-35°C Electrical Specification-Fuse Specification: 250V/3A Humidity: = 85% Rh Frequency: 50/60 Hz Low: 1 X 3Ml/Normal: 1 X 3Ml/High: 1X3 Ml , Sthetoscope Brand- Bpl/Littman , Pulse Oxymeter Brand - Dr Trust /Beurer/ Bpl Specification Finger Chamber With Smart Spring System Accommodates A Wide Range Of Finger Sizes Pop-Up Menu To Setup Alarm Limits For Spo2 And Pulse Rate Low Battery Indicator Pule Rate: Yes Auto Power-Off: Yes Bright, Large Display For Better Visibility In Daylight Anti-Movement Feature Sturdy, Portable And Light-Weight Very Easy To Operate With Single Switch Operation Warranty ( Only Checking Warranty ) , Nebulizer Machine ( Brand -Bpl/Dr Trust) Operation Mode Table Top Size Compact Application Clinical Purpose, Hospital Medicine Cup Capacity 50 Ml Particle Diameter 1-5 Um , Pns ( Pereferal Nerve Stimulator For Nerver Block) Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Should Be Suitable To Identify Peripheral Nerves And Giving Percutaneous Stimulation In Neuro Muscular Block. - Should Have A Percutaneous Monopolar/Bipolar Stimulating Handle For Localization Of Nerves Without Puncturing The Nerve Which Should Be Autoclavable. - Should Have Selectable Stimulation Intensity Ranging From 0-60Ma In Steps 0.1Ma With Stimulating Handle And Stimulation Impulse Width From 0.3Ms, 0.5Ms And1.0Ms - Should Continuously Measure & Display Actual Current Passing Through The Patient And Selected Current -Should Have Pause Function To Interrupt Stimulation Without Delivering Impulses Test Function -Should Automatically Switch Off With A Acoustic Warning If Not Operated Over A Period Of 20 Mins -Should Have Lcd Display For Stimulation Current, Impulse Pattern, Pulse Width, Impulse Amplitude. - Should Have Analog And Digital Display Of Selected Current And Actual Current. - Should Have Membrane Touch Pads For Choosing Stimulation Function -Should Be Small (Pocket Size) & Light Weight. Should Be Ce Certified Or Usfda Certified , Nerve Locator With Needle Brand- B Braun / Vygon Sas/ Stimuplex Hns/2 Separate Output For Nerve Stimulator - Mapper And Locator For Safety. Automatic Switch Over From Mains Power Adaptor To Rechargeable 9Vbattery With Low Battery Warning Indicator. Feather-Touch Keypad For Easy Operation, Simple Setting And Extended Reliability. Variable Current Range As Per The Selected Mode(Impedane:0 To 5 Kohm). User Programmable Pulse Width And Frequency. Alphanumeric Lcd Display With Back Light. Automatic Shutdown For Power Saving. Audio And Back Light On-Off Option. Alarm: Audio-Visual-Alarm Is Activated If Flow Of Oxygen Falls Below 1Lpm. , Percussion Hammer Ss 304 , Tuning Fork 128 Hz Satinless Steel , Laryngoscope A Laryngoscope Is A Device Used In Medical Procedures To Visualize The Trachea By Inserting A Blade With A Small Light Into The Patients Mouth , Oxygen Concentrator Brand- Philips/Bpl/Deck&Mount 1. Flow Rate :-0-5L/Min 2. Purity 93+3% 3. Outlet Pressure(Mpa):-0.04-0.07 4. Sound Level :-<50 Dba , High Flow Nasal O2 Cannula (Brand- Drager / Niceneotech ) High-Flow Nasal Oxygen (Hfno) Therapy Delivers Heated And Humidified Oxygen At High Flow Rates (Up To 60 Liters Per Minute) Through A Nasal Cannula , Electric Needle And Syringe Destroyer Hub Cutter Stainless Steel With Auto-Cut Protection , Clinical Thermometer(Digital) , Medical Labrotary Refrigrator ( Brand- Remi / Vav Intruments) Capacity 600 Litres Temperature Range 2°C To 8°C Internal Configuration Adjustable Shelves And Storage Bins For Optimal Space Utilization Cooling Type Uniform Cooling For Consistent Temperature Distribution Display & Controls Digital Display With User-Friendly Controls Power Supply Energy-Efficient Performance , Refrigrator Domestic Single Door Godrej/ Kelvinator/ Bluestar Capacity 200 Litres To 265 Liters Temperature Range 2°C To 8°C , Wieghing Scale Mannual , Knee Hammer , Sahli,S Heamoglobinometer , Artery Forcef Staright 6 (Brand - Jj Instrument) , Double Hook Retractor Standard Size (Brand - Jj Instrument) , B.P Handleno 3 (Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 4 Mosquito(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 6 Medium(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 8 Long(Brand - Jj Instrument) , Artery Forceps Curved (Fine Tip) 9 Long(Brand - Jj Instrument) , Allies Forceps Big (Brand - Jj Instrument) , Allies Forceps Medium (Brand - Jj Instrument) , Allies Forceps Small (Brand - Jj Instrument) , Mayo Scissior Str 5 ½ Sttilette Edge(Brand - Jj Instrument) , Mayo Scissiorcvd 6 ¼ Sttilette Edge(Brand - Jj Instrument) , Scissors Straight 6 Medium(Brand - Jj Instrument) , Scissors Straight 5 Small(Brand - Jj Instrument) , Scissors Straight 8 Big(Brand - Jj Instrument) , Steinman Pin Introducer Ss(Brand - Jj Instrument) , Towel Clip 6 Big(Brand - Jj Instrument) , Towel Clip 4 Small(Brand - Jj Instrument) , Wire Cutter 9 Standard Size(Brand - Jj Instrument) , Detnal Wire Standard(Brand - Jj Instrument) , Langenbeck Retractor Medium(Brand - Jj Instrument) , Langenbeck Retractor Small(Brand - Jj Instrument) , Langenbeck Retractor Big(Brand - Jj Instrument) , Cats Paw Retractor Standard Size(Brand - Jj Instrument) , K-Wire Cutter With Tungsten Carbide Tip 7 Standard(Brand - Jj Instrument) , Hintermann Distractor Medium(Brand - Jj Instrument) , Mippo Wire Passer For Long Bone Large(Brand - Jj Instrument) , Wire Bender Standard Size(Brand - Jj Instrument) , Kocher Clamp 8 Standard Size(Brand - Jj Instrument) , Glucometer (Brand-Dr Trust / Dr Morphen/Accucheck/Accurex) Fast Result In 5 Seconds Small 0.5Ul Blood Sample Size Large Memory. 10 Lancets Minimum Blood Sample: 0.5 Microlitre ; It Features A Large Display Screen That Can Store Up To 300 Test Results , Vortex Mixture (Brand -Remi /Borosil/ Benchmark) Type Of Product Cyclomixer Shaking Movement Orbital Orbital Diameter (Mm) 4 Motor Type Shaded-Pole Motor , Bio Saftey Cabinet Type-Ii A Microflow (Brand - Microflow / Thermofisher) Specification Material Of Construction (Main Body) Crca/Gi Powder Coated/Stainless Steel 304 Material Of Construction (Work Table) Stainless Steel 304 Dimensions External (Wxdxh) -1950 X 900 X 2250 Mm Internal (Wxdxh) - 1830 X 610 X 610 Mm Average Air Velocity - 90 ± 20% Fpm Hepa/Ulpa - Efficiency 99.997%/99.999% Class Level - Iso 3/5 (Class 100) Noise Level - 65 ± 5 Db Electrical - 230 V, 50 Hz, Single Phase Special Features - Motor Driven Front Door, Alarm, Hepa Filter Blockage, Timer For Uv Light, Power Socket Inside The Cabinet Pressure Sensor Monitoring, Digital Airflow Verification, Interior Eye Level Display, Display Parameters Including Down Flow Air Velocity, Total Operating Hours. Standards Us Fed Std 209 E, Iso 14644-1, Iest-Rp-Cc-002-2, Bsi Certifications- Ce & Iso , Co2 Incubator (Brand - Remi / Thermofisher) Specification Chamber Volume (150 Liters) Sensor Infrared Co2 Heating Method Air-Jacketed, Pid Control Co2 Range 0~20% V/V Co2 Control Resolution ± 0.1% (Ir Sensor) Temperature Range Rt+5~55°C Temperature Stability ± 0.1°C Humidity Method Natural Vaporization > 95% Co2 Recovery (Door Open 30S, Recovery To 5%) = 3 Min Temperature Recovery (Door Open 30S, Recovery To 37°C) = 8 Min Shelves 2 3 Interior Dimension (Mm) (W X D X H) 400 X 450 X 500 480 X 530 X 610 Exterior Dimension (Mm) (W X D X H) 590 X 687 X 790 670 X 767 X 880 Supply:220-240 Volts, 50 Hz Single Phase , Binocular Microscope - Olympus( Model Ch21i) / Magnus (Model- Pzb 22) (Specification) Optical System: - High Contrast Finite Colour Corrected Optical System Magnification:- 40X To 1000X Visual Magnification. Stand: Aluminium Die-Cast Stand With Hand Rests For Enhanced Comfort And Stability. Observation Head: - Sidentopf Binocular/Trinocular Head, 360° Rotatable, Interpupillary Distance 53-75Mm, With Dual Diopteric Adjustment. Eye-Piece: - Wide Field 10X F.O.V 22Mm, Anti-Fungal & Anti- Reflection Hard Coated (Optional 10X/18Mm). Nosepiece: - Reverse Angle Quadruple Nosepiece (Ball Bearing Type) With Precise Click Stops. Objective: - Qusp Series High-Contrast Flat Shield Plan Din Achromatic Objective 4X, 10X, 40X (S) And 100X Oil, (S), Anti-Fungal & Anti-Reflection Hard Coated. Mechanical Stage: - Rack-Less X Axis Double Plate Stage, Size 190 X 125Mm (+-5Mm) With Cross Travel 90 (X) X 50Mm (Y) On Ball Bearing With Co-Axial Controls. Hard Coated Surface For Scratch Resistance. Double Specimen Holder Clip. Focusing Control: - Co-Axial Coarse And Fine Focusing On Gear Systems For Smooth Operation. Fine Adjustment 0.2Mm/Rotation With Maximum 2-Micron Scale Increment. Condenser: - Sub-Stage Moveable Abbe Condenser, Centerable, Na 1.25 With Aspheric Lens. Iris Diaphragm And Special Frosted White Filter, Swing-In, And Swing-Out Filter Holder. Light Source: Led 3.5W 3V Illumination With Variable Illumination Control Universal Power Supply 110V-240V, Ce Approved. Supply With: Power Cable, Immersion Oil, Spare Bulb (In Led Only) User Manual, Vinyl Dust Cover, Cleaning Cloth, And 01 Units Fuses Optional Accessories: - Wooden Carrying Case, Pointers & Micrometre Reticules , Penta Head Microscope(Brand- Micron/Magnus/Weswox) Optical System- Infinite Optical System Viewing Head Inclination 30 Degree, Ipd: 48-75. 01 Piece Trinocular Head, Inclined At 30°, 360° Rotatable, Phototube With 100:0/50:50 Light Split With Sliding Prism. 04 Piece Compensation Free Binocular Head, Inclined At 30°, 360° Rotatable With Diopter Adjustment. Eyepiece-10 Pairs Of Wide Field Eyepiece Wf10x/22Mm Nosepiece- Inverse Quintuple Nosepiece. Objective Plan Achromatic Objective 4X Plan Achromatic Objective 10X Plan Achromatic Objective 20X Plan Achromatic Objective 40X Plan Achromatic Objective 100X Condenser - Swing Out Condenser N.A.0.9/1.25 Focusing-Coaxial Coarse And Fine Adjusting System With Tightness Adjustment And Upper Limited, Coarse Adjustment Range 30Mm. Fine Adjustment Precision: 0.002Mm Attachment- Multi Head Attachment And Support Stand. Stage- Ceramic Coated Double Layers Mechanical Stage Of 185X142 Mm With Capacity To Hold Two Slides At A Time With Slide Catcher On Left And Motion Control On Right Hand Side Illumination- External Illumination, Led 12V 100W Pointer - Multi Colored Ponters With Intensity Controllable Led Colored Indicator (Blue, Green And Red Led) Pointer 360 Rotatable, Brightness Adjustable, Arrow Control Sticks And Color Selection Dial. Video Adapter C Mount 0.5X Camera - 8Mp Hd Camera 4K Resolution With Removable Hd Card With Sd Card And Compatible Software. Display-43 Inch Hd Display Connected To Penta Head Camera For Live Display With Suitable Stabilizer For Display. Certifications - Ce(Notified), Ios 9001 (Iaf Accredited), Ios 13485 Warranty: 1 Year , All In One Pc ( Brand- Hp/Dell/Lenovo) All-In-One Pc 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, 710 White Wireless Keyboard And Mouse Combo (Windows 11 Home, Mso 21, Shell White, 6.72 Kg) 27-Cr0407in , Desktop ( Brand- Hp/Dell/Lenovo) 13Th Gen Intel Core I5 27 (68.6Cm) Fhd 16Gb Ram, 1Tb Ssd, Intel Uma Graphics, Wired Keyboard And Mouse Combo (Windows 11 Home, Mso 21) 27-Cr0407in , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 1.5 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Air Conditioner( Brand- Hitachi/ Bluestar/ Daikin/ Carrier) Ac 2 Ton05star Smart Inverter Ac With Installation & Extra Wire /Pipe , Lithium Battery 1500Wh Battery 48W 120Ah ( Brand- Luminous /Amaron) , Executive Premium Office Chair, Leather “Adjustable Arms Ergonomic Chair Must Behigh Back ( Brand- Godrej) , Office Table4x3 Feet( Brand- Godrej) , Mid Back Office Chiar ( Brand- Godrej) , Revolving Stool ( Brand - Aliza /Godrej) 3 Leg Ss Top Powder Coated Thicknessminimum- 14 Gauge , Steel Almirah W X H X D: 91.44 Mm X 197.866 Mm X 485.140 Feet For Office Use(Brand- Godrej) , Xerox Machine (Hp/Canon/Ricoh) Print Duplex, Copy, Scan, A3 Black And White Laserjet Printer, Enterprise Departments/ Distributed Workforce, Laser Printers Print Speed Is Up To 22 Pages Per Minute (Ppm) For Black And White Printing , Imcubator Electrical 23 Lts Thermostat , Centrifuge Machine Clinical ( Brand - Remi /Benchtop) , Salters Baby Wieghing Machine , Oto Scope , Chloroscope , Horrock,S Appratus Portable , Sound Level Meter Decible Meter With Lcd Display , Water Depth Sampler , Vaccine Carrier , Mosquito Catching Kit , Craft Water Testing Kit
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 8
Jharkhand View Result →
47.
Power #10432291 Price Bid
tender for DISMANTLING OF 315MVA, 400/220KV TRANSFORMER, ERECTION OF 500MVA, 400/220KV TRANSFORMER ALONGWITH ASSOCIATED WORKS AT 400KV SUB STATION SARNATH, VARANASI Sl. No. Item Description 1 Dismantling of following old & used equipment by opening of nut - bolts, opening of jumpers, removal of earthing and safe shifting of LA upto store and all other associated works. 2 390KV LA 3 198KV LA (alongwith dismantling of structure & its shifting to storage place. 4 Shifting of following equipments from store to site, its erection alongwith required base modification of structure and all associate works, earthing etc. 5 390 KV LA 6 198 KV LA (alongwith structure) 7 Removal of HV / LV jumper pipe, Neutral earthing strip electrical connection including cutting of channel / angle iron and removal from foundation. 8 Complete dismantling the accessories of 315MVA Transformer (BHEL make AVAL repaired)after opening of jumpers, removal of earthing and opening of cable connection, draining out the T/F oil upto required level in 209 Lit. capacity of oil drum / tanker, removal of all radiators, conservator tank, oil pipe line, all bushings, turrets, fan motors, marshalling boxes, OLTC panel etc., blanking the radiator, oil pipe lines, conservator tanks, turret etc. with proper gasket alongwith nuts & bolts to complete the job satisfactorily including proper stacking. Blanking plates, nuts & bolts shall be provided by the department. All necessary labour T&P etc. shall be arranged by the contractor at his own cost. 9 Dismantling all water and air pipelines of Mulsifire system of 315MVA Transformer, it’s safe shifting to storage place. 10 Complete drain out of the Transformer oil in 209 Lit. capacity oil drums of 315MVA Transformer. 11 Create the vacuum in main tank and filling of nitrogen in 315MVA T/F main tank. 12 Shifting of main tank of 315MVA Transformer (BHEL make AVAL repaired) from plinth to storage platform upto 20 Meter distance. 13 Additional shifting of main tank of 315MVA Transformer (BHEL make AVAL repaired) as actual including all T&P and all other work required to complete the job satisfactorily. 14 After dismantling of 315MVA Transformer shifting of 400KV bushing, 220 KV & 33 KV bushing of Transformer, all fan & oil pump, motor, conservator tank, radiator to store including stacking of radiator to store including stacking of radiators. 15 Re-filling of Transformer oil in 315MVA main tank from 209 Lit. capacity oil drums by help of centrifuging machine after shifting of transformer at desired place. 16 Shifting of main tank of 500MVA T/F from storage place to plinth upto 20 meter distance. 17 Additional shifting of 500MVA T/F as actual including all T&P and all other work required to complete the job satisfactorily. 18 Providing of Dry Air at the time of opening of blanking plate for erection of 500MVA Transformer Main Tank and filling of dry air of dew point -400 C or better for completion of work. The work shall include connecting pipe as required for measurement of dew point values of dry air. 19 Complete erection of 500MVA Transformer by erection of Radiator, conservator tank, all bushings, their turret, connecting oil pipe, cooling fan, Motor drive mechanism of tape changer, RTCC panel, Oil pumps and associated oil pipelines etc. to complete the job satisfactorily including Vacuuming the main tank of the 500MVA Transformer and sustaining the required vacuum for complete removal of the moisture in main tank. Then 1st filling of oil and topping up of Transformer oil in tank, radiator, oil pipe lines, conservator tank etc. and attending the oil leakage if any and all other associated works for satisfactory completion of work, no T&P shall be provided by the department. 20 Complete evacuation of 500MVA Transformer main tank and filling of Dry Air of dew point - 400C or better in vacuum up to pressure of 0.25 Kg/Cm2 and the again. 21 Create the vacuum inside the Transformer Tank and sustain it for 24 Hrs. filling the oil step by step in 500MVA Transformer. 22 Filling the Transformer oil in oil tanker from drums by centrifuging machine to increase the BDV value in 500MVA Transformer (Approx. 110 KL) 23 Circulation of Transformer oil of 500MVA Transformer Tank or oil tanker by connecting centrifuging machine to be provided by the contractor, taking BDV value of oil and IR value of periodically, till the required BDV and IR value is obtained as per direction of supervising engineer (Approx. 110 KL). Centrifuging machine with operator and oil testing set shall be provided by the contractor at his own cost. 24 Fresh earthing of 500MVA Transformer body from two different points to Neutral bushing of Transformer with 75 x 10 mm / 50 x 6 mm M.S. Flat at a depth of 2200mm in the ground along with complete earthing of radiator, Marshling Box, OLTC Cubicle and other points at 2 points Neutral Bushing of transformer including painting by Green color paints in 2 coats. (M.S. Flat will be provided by the Department). 25 Connection of 500MVA T/F with laying of cable and termination in between Turrets, WTI, OTI, Buchholz relays, PRV, cooling fans, pumps, OLTC, Marshalling Box etc. with proper ferruling as per drawing. 26 Laying of control cable of various sizes from 500MVA Transformer marshalling Box, C.T., OLTC to relay / control panel including associated works as shifting from store. 27 Inter connection of L.A, of 400KV, 220 KV equipment of 500MVA Transformer of different type connectors, HV / IV Jumpers and clamp / P.G. clamp etc. including proper bending & jointing of 4” IPS Al. pipes and all other associated works to complete the job. Bending machine shall be arranged by the contractor. 28 Remodelling of mulsifyre for 500MVA, 400/220/33KV Transformer by using and laying of existing pipe lines of size 25mm, 40mm, 50mm, 65mm & 80mm GI Pipe Lines in overhead and using other useful components like deluge valve, QB detector, High Velocity Nozzle used in mulsifyre installed at existing 315MVA Transformer as per specification and site requirement, complete with associated work. 29 Supply & laying of following ‘B’ Class (IS: 1239) GI Pipe Lines overhead/ underground in addition to above item (1A) as per site requirement specification andcomplete with associated tees, Elbows / Bends, sockets, flanges etc. by due cutting, bending, fabricating and welding etc. of pipe lines including digging of earth trench 1 meter below ground level as well as below the bed of cable trenches & road crossing alongwith anticorrosive treatment by bituminous painting on outer surfaces and wrapping hot dipped bitumen jute in 2 layers of underground pipe lines & 2 coats painting of overhead pipe lines in P.O. red colour after applying of one coat of red oxide primer. Finally filling & levelling of earth including repairing / concreting of road crossing as per details below : 30 Supply & laying of 25 mm dia ‘B’ class GI pipe 31 Supply & laying of 40 mm dia ‘B’ class GI pipe 32 Supply & laying of 50 mm dia ‘B’ class GI pipe 33 Supply & laying of 65 mm dia ‘B’ class GI pipe 34 Supply & laying of 80 mm dia ‘B’ class GI pipe 35 Supply & laying of 100 mm dia ‘B’ class GI pipe 36 Supply & laying of 150 mm dia ‘B’ class GI pipe 37 Supply & erection of Pylon support of M.S pipe ‘B’ Class 80 mm dia with angle iron, U Bolts, flanges & nuts & bolt for new Mulsifire System. 38 Construction of Pylon support base for new Mulsifire System. 39 Dismantling of existing Shed and reconstruction of shed for new Mulsifire System using materials of existing shed for deluge valve of 315MVA. 40 Supply & fixing of pressure gauges for new Mulsifire System. 41 Supply & fixing of pressure switches for new Mulsifire System. 42 Supply & fixing of sluice valve 150 mm dia for new Mulsifire System. 43 Supply & fixing of ‘Y’ strainer of 150 mm dia for new Mulsifire System. 44 Supply & fixing of QB detectors of 790 C for new Mulsifire System addition to detectors of existing mulsifyre. 45 Supply & fixing of HV Nozzles K-18x800 for new Mulsifire System. 46 Providing & fixing of 150NB Deluge valve for new Mulsifire system 47 Supply of Bimetallic 220 KV CT Clamp suitable for twin Moose conductor complete with hot dip galvanized nut, bolt, spring, flat washer. 48 Supply of Bimetallic 220 KV Standard / Tandem Isolator clamp suitable for twin Moose conductor complete with hot dip galvanized nut-bolt, spring, flat washer. 49 Dismantling of old 245KV 1000/800/500 Amp. Current Transformer including removal of cable, earthing etc. and shifting to store safely. 50 Dismantling of old 245KV CT Junction Box including removal of cable, earthing etc. and shifting to store safely. 51 Erection of 220KV Main lattice type structure (BXM) required for twin moose Jack Bus Bar. The job. consist of shifting of structure parts, Nut & Bolts from store to erection site in switchyard, its erection as per relevant drawing and practice using flat washers etc. with each bolt. 52 Carriage of 220KV Main lattice type structure (BXM) from other Sub Station / Place (Distance approx. 150 Km.) 53 Erection of 245 KV 2000/1600/1000 A Current Transformer in 220 KV Bay of 500MVA transformer as per instruction manual of various equipment and technical specification, proper earthing and shifting of material from store to site including all other associated works to complete the job. 54 Erection of 245 KV CT Junction Box in 220 KV Bay of 500MVA transformer as per instruction manual of various equipment and technical specification, proper earthing and shifting of material from store to site including all other associated works to complete the job. 55 Providing and fixing of 245KV S&S make male contact arm assembly for 2000 Amp. made of Aluminium Rod on side connecting the male contact solid core with U type housing and another side connecting the contact finger matching another side 20x6 mm copper fingers including dismantling of old 1250 Amp. 220Kv arm assembly and fixing new 2000 Amp. assembly proper checking alignment and Adjustment. 56 Providing and fixing of 245KV S&S make female contact arm assembly for 2000 Amp.made of Aluminium Rod one side connecting the fixing Jaw assembly with 20x6mm copper finger complete with main arm, another side connecting the contact finger matching wit rotary rod including dismantling of old 1250 Amp. assembly, proper checking alignment and adjustment. 57 Providing and fixing of 245KV S&S make Rotary head assembly made of aluminium alloy housing-mounting arranged up on insulator in centre connecting clamp including dismantling of old Rotary head assembly and fixing of new rotary 2000 Amp. proper checking alignment and adjustment. 58 De-Stringing & dismantling of existing 220KV Jack Bus Bar (Approx. length 75 Meter) of single ACSR Moose conductor of 220KV Bay of existing 315MVA Transformer - IV including De-hoisting of Disc Insulator strings of Tension & fittings from gantry alongwith shifting of the old conductors and fittings etc. from switchyard to sub station stores. (1 Job. for each Bays of each section of the Bus Bar). 59 Stringing & proper sagging of 220KV Jack Bus Bar section (R, Y & B phase) for 500 MVA, 400/220/33 KV Transformer by twin Moose conductor, the work includes carriage of conductor from store to site, straightening, cutting & bending fitting of hardware, spacers etc. alongwith hoisting of 120 KV disc insulator string etc. with all cost of men and T&P required for the job. Approx. length 75 Meter (R, Y & B phase) 60 Bay wise interconnection of equipment with twin moose conductor of R, Y & B phase at 220 KV Bus Bar to standard Isolator of Bus - I ( 1E/S), Tandem Isolator of Bus- II, Line Isolator (2E/S) and Tandem Isolator of Transfer Bus including cutting, bending to proper shape, size fixing with clamp and all associated works as per specification. 61 Breakdown Voltage Test, Water Content Test, Dielectric Dissipation Factor Test, Resistivity and Dissolved Gas Analysis (as per IS Norms) along with collection charges of 1 No. Oil Samples (1st Oil Sample for testing will be taken before charging) of new 500MVA, 400/220KV Transformer. Dissolved Gas Analysis (as per IS Norms) along with collection charges of 3 No. Oil Samples (2nd Oil Sample for testing will be taken after 24 hrs. of charging) of new 500MVA, 400/220KV Transformer, 3rd Oil Sample for testing will be taken after 7 days of charging and 4th Oil Sample for testing will be taken after 1 month of charging. 62 Providing Electrical Safety clearance from Office of the Director Electrical Safety, Gomti Nagar, Lucknow by submitting Electrical inspection fees through Challan for Energisation of 1 no. 500MVA, 400/220KV Transformer.
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Boards / Undertakings / PSU No of Bidders 5
Uttar Pradesh View Result →
48.
Educational and Research Institute #10430952 Price Bid
Tender For Renovation Of Lab No. 204 A And B Of Old Core Lab; 1 ROOFING 2 Providing and fixing tiledfalseceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main T runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross T of size 24x25 mm made of 0.30 mm thick (minimum) sheet,1200 mm long spaced between main T at 600 mm center to center to form a grid of 1200x600 mm and secondary cross T of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like difusers, grills, light fittings, fixtures, smoke detectors etc. Main T runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 3 12.5mmthicksquareedgePVCLaminatedGypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. 4 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. 5 FINISHING 6 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour: 7 New work(twoormorecoats)over andincludingwater thinnable priming coat with cement primer having VOC content less than 50 gram/litre 8 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 9 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand andmanufacturerincluding applying additional coats wherever required to achieve even shade and colour 10 Old work (one or more coats) 11 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 12 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 13 One or more coats on old work 14 REPAIRS TO BUILDING 15 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 16 With cement mortar 1:4 (1cement: 4 coarse sand) 17 Dismantling and Demolishing 18 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 19 Of area beyond 3 sq. metres 20 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : 21 Up to 10 mm thick 22 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer- in-charge. 23 ALUMINIUM WORK 24 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : 25 For fixed portion 26 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 27 Forshuttersofdoors,windows&ventilatorsincluding providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 28 Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) 29 Providingandfixingdoubleglazedhermeticallysealedglazingin aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete. 30 Minor Civil Maintance Works 31 Providing and fixing vertical blinds VISTA make dustgaured ( class / select) or approvel equivalent make & Quality complete as per direction of Engineer-in-charege 32 Extra for providing Toughengin glass instead of float claar glass of 6mm thick
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 2
Uttar Pradesh View Result →
49.
Housing Urban and Rular Development #10429628 Price Bid
Providing Of Microcontroller Based Wireless Controller System For Water Level Management And Other Accessories Etc. For The Existing Water Supply System At Transport Authority, 5/9 Under Hill Road, Delhi.- 1 Supply, installation, testing, and commissioning of a microcontroller based wireless controller system designed for managing water levels and pressure across multiple remotely situated tanks. The wireless controller communicates on 865~868Mhz band for long range communication. This control system integrates microcontroller technology with wireless data reception capabilities to receive various sensor data wirelessly to indicate & control water automation system. It will indicate water level in Percentage with One percent resolution alongwith tank ID through 4-digit LED/LCD display (minimum 56mm height) for real-time visualization of water levels and sensor data, alongside four potential-free relays that enable the system to operate single or dual motors (three-phase) based on specific conditions. The controller starts the motors when water levels in any linked tank drop below predetermined thresholds and stopping them when all tanks reach capacity. It also responds to data from pressure transmitters, ensuring motors operate within defined pressure ranges in pipeline. It must have a built-in RTC with timer functions, enabling automated motor control based on configurable schedules, while providing comprehensive runtime statistics for monitoring purposes. There should be an audio & visual alarm, if water level in any tank cross threshold limit for overflow level. It should also give visual indication for various fault conditions. Operating voltage single phase 180~260Vac. It can also indicate status of motorized valve and minimum number of opened valves can be set beyond which it will stop the motor to avoid excessive pressure in pipeline. It will also indicate rising/ falling trend of water level in overhead/ underground. 2 Supply, Installation, Testing & Commissioning of Battery operated (to power minimum 8Year) RF based ultra low powered wireless water level data top transmitter (minimum 15dBm power) operating in frequency band 865~868mHZ, confirming to EN 300 220 and ingress protection IP68, with scale and corrosion free capacitance based level sensor to measure water level percentage from 0% to 100% (± 5% with 1% resolution for tanks upto 10mtr depth with auto calibration sensor. It should also calculate trend & rate of rise/ fall of water level and transmit the data alongwith water level data. It will have input for detection of conductivity based flow in pipeline and on/off status of motorized valve and send the data wirelessly. It should have a technique to avoid collision of RF signal and minimize corruption of data. It should have CRC check in transmitted data to detect error in block of data. (Underground sump) 3 Supply, Installation, Testing & Commissioning of Battery operated (to power minimum 8Year) RF based ultra low powered wireless water level data sump transmitter (minimum 15dBm power) operating in frequency band 865~868mHZ, confirming to EN 300 220 and ingress protection IP68, with scale and corrosion free capacitance based level sensor to measure water level percentage from 0% to 100% (± 5% with 1% resolution for tanks upto 10mtr depth with auto calibration sensor. It should also calculate trend & rate of rise/ fall of water level and transmit the data alongwith water level data. It will have input for detection of conductivity based flow in pipeline and on/off status of motorized valve and send the data wirelessly. It should have a technique to avoid collision of RF signal and minimize corruption of data. It should have CRC check in transmitted data to detect error in block of data.(overhead tank) 4 Supply, Installation, Testing & Commissioning of 230Vac/ 5V DC operated RF signal booster operating in Frequency band 865~868mHZ confirming to EN.300.220 to relay/ transmit the RF signal received from multiple transmitters to further distance with LED based instant indicator. It should have a technique to avoid collision of RF signal and minimize corruption of data. A mechanism should be there to avoid circular transmission of data between repeaters. LED based visual indication should be there to indicate signal strength of received wireless data. It should have RF receiving sensitivity of minimum -125dBm and transmission power of minimum 15dBm. It should be configurable to filter out RF signal of particular transmitters to reduce the transmission signals in Air. It should have shock proof ABS body with IP65 rating and must have suitable mounting arrangements on wall or stand. 5 Supply, Installation, Testing & Commissioning of 12V DC operated wireless RTU to receive data wirelessly from remote sensor data transmitters/ RF boosters and push the data to BMS/ controller unit through UART and to the server through 4G/ 5G GSM network. This device will be equipped IOT sim of cellular network service providers. It should have LCD/ OLED screen to display various parameters and status of network/ connectivity. The enclosure should be IP65 rating with suitable mounting arrangements. It should be equipped with wifi module to connect with server through available wifi network. Various settings should be configurable through common web browser using wifi feature. 6 Providing web based remote Controller/ Water level monitoring system by providing access to control/ information panel at Central server of minimum Tier-III level data centre in India. It will trigger SMS alerts for various events on crossing limits. The cost include only for access to server/ application and it does not include the cost of required hardware. The cost of hardware will be charged separately but the cost of running the services is included .For access to Motor controller/ Valve Controller to operate - For 12 months 7 Supplying & Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. 8 4 x 16 sq.mm 9 Supplying & Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power aluminum conductor armoured cable of 1.1 KV grade of following size on surface as required. 10 3.5 x 25 sq.mm
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 4
Delhi View Result →
50.
Drinking Water Supply and Sanitation #10406233 Price Bid
Tender For Nagar Panchayat Suchittaganj (Khirauni) Water Supply And House Connection Scheme District-Ayodhya - DISTRIBUTION SYSTEM 2 Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destinationand all taxes and insurance etc. with loading, unloading and stacking all complete. 3 HDPE PipePN-6 PE-100 4 90 mm dia 5 110 mm dia 6 140 mm dia 7 160 mm dia 8 DI Pipe Class K-7 9 200 mm dia 10 250 mm dia 11 300 mm dia 12 Carting of following size & type of pipes and specials to site of work and lowering them into the trenches and laying true to alignmentand gradient and jointing etc. complete including testing of pipe lines and cutting of pipes. 13 HDPE PipePN-6 PE-100 14 90 mm dia 15 110 mm dia 16 140 mm dia 17 160 mm dia 18 DI Pipe Class K-7 19 200 mm dia 20 250 mm dia 21 300 mm dia 22 Excavation for pipeline work in ordinary Soil (loam, clay orsand) with lift up to 1.5 M and lead up to 50 M including filling back the excavated earth into the trenches with watering, ramming and disposal of surplus earth with in 50 M lead. 23 Supply of following sizes D.I.D./F Sluice valve including F.O.R. destination and taxes and insurance etc. complete as per relevant IS. 24 D. I. D/F Sluice Valve 25 80 mm dia 26 100 mm dia 27 125 mm dia 28 150 mm dia 29 200 mm dia 30 Scour valve 80 mm dia 31 Fire Hydrant 80 mm dia 32 C.I. Single ball type Air Valve 25 mm dia 33 Carting of following sizes D.I.D./ F Sluice Valve and specials from departmental store to site of work and lowering them into the trenches, fixing in position and jointingthem with pipelines and testing etc. complete including supply of jointing materials. 34 D. I. D/F Sluice Valve 35 80 mm dia 36 100 mm dia 37 125 mm dia 38 150 mm dia 39 200 mm dia 40 Scour Valve 80 mm dia 41 Fire Hydrant 80 mm dia 42 C.I. Single ball type Air Valve 25 mm dia 43 Supply of all materials and construct following chambers as per type design with supply of all labour, T&P etc. complete. 44 Masonary Type 45 Fire Hydrant Chamber 46 Air Valve Chamber 47 Surface Box Type 48 Dismentling of following type of road and stacking of useful materials including supply of all materials, labour, T&P etc. complete. 49 BOE Road 50 C.C. Road 51 Bitumen Road 52 Interlocking 53 Reinstatement of following type road As per PWD specification 54 BOE Road (with40 % New Bricks and 60 % old Undamaged serviceable bricks) 55 C.C. Road (with 150 mm PCC base of 1:4:8 cement: coarse sand: 40 mm Stone Aggregate and 100 mm Cement Concrete course of 1:1.5:3 cement: coarse sand: 20 mm Stone Aggregate) 56 Bitumen Road PWD1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.3. Providing, laying, Spreading & Compacting graded stone aggregateto wet mix macadam. (150 mm thickness)4. Providing & applying PrimeCoat with medium bitumen VG 10 on prepared surfacespreading primer at the rate of 0.75 Kg./Sqm.5.P/L of 40mm thick BC with 100-120 TPH batch type HMP Producing and Avg. Output of 75 TPH using crushed aggt. Of specified grading premixed with bituminous binder VG 30 @ 5.5 %6.Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size7. Providing all necessary barricating and road painting work. 57 Interlocking Tile Road (40 % New interlocking tile 80 mm thick M 35 Grade and 60 % old serviceable tiles , Plain cement concrete in 75 mm thickness 1:6:12 cement :coarse sand: 40 mm stone aggregate in base) 58 Provision for following types of Culvert crossing along the alignment of pipe line complete as per instructions of Engineer ‐in ‐charge. (casing of pipe is done by concreting) 59 Nala/Culvert Crossing ( width ‐3.5 m) 60 Making house connection should be done atleast 2 m inside the boundary wall with provision of tap from distribution line to outer wall of house with supply of 1 m above GL G.I. pipe ( 15 mm ) ( above ground ) & average 5 mtr. MDPE Pipe ( 20 mm) ( below ground) including specials saddle Tapetc. of suitable size T&P etc. including excavation laying and jointing for proper completion of work as per instructions of Engineer as per Dwg 12 (including dismantling and reinstatement of road) 61 In C.C. roads 62 For 90 mm to 110 mm dia 63 For 125 mm to 160 mm dia 64 For 180 mm to 250 mm dia 65 For 250 mm to 300 mm dia 66 In bituminous roads 67 For 90 mm to 110 mm dia 68 For 125 mm to 160 mm dia 69 For 180 mm to 250 mm dia 70 For 250 mm to 300 mm dia 71 In BOE roads 72 For 90 mm to 110 mm dia 73 For 125 mm to 160 mm dia 74 For 180 mm to 250 mm dia 75 For 250 mm to 300 mm dia 76 In C.C. Interlocking Tiles roads 77 For 90 mm to 110 mm dia 78 For 125 mm to 160 mm dia 79 For 180 mm to 250 mm dia 80 For 250 mm to 300 mm dia 81 In Kachcha roads 82 For 90 mm to 110 mm dia 83 For 125 mm to 160 mm dia 84 For 180 mm to 250 mm dia 85 For 250 mm to 300 mm dia 86 LAYING OF RISING MAIN 87 Supply of D.I. pipes (K-9)offollowing size/wall thickness with I.S. 8329/2000 or its latest amendments with jointing materials including FOR destination and all taxes and insurance and including all specials of rising mainetc. complete. 88 150mm dia DI K-9 89 200mm dia DI K-9 90 Excavation of earth for pipe line trenches in ordinary soil (loam, clay or sand) with lift upto 1.5 and lead upto 50M filling back the earth into trenches including watering, ramming and disposal of surplus material with in 50M lead etc. complete. 91 Carting of following sizes D.I. pipes class K-7/9 and specials to the site of work loweering them in to trench and laying true to alignment including testing of pipeline but excluding cost of trenching and cutting of pipes etc. for making of length but including making joints. 92 DI Pipe Class K-9 93 150mm dia DI K-9 94 200mm dia DI K-9 95 Dismentling of following type of road and stacking of useful materials including supply of all materials, labour, T&P etc. complete. 96 BOE Road 97 C.C. Road 98 Bitumen Road 99 Reinstatement of following type road As per PWD specification 100 BOE Road (with40 % New Bricks and 60 % old Undamaged serviceable bricks) 101 C.C. Road (with 150 mm PCC base of 1:4:8 cement: coarse sand: 40 mm Stone Aggregate and 100 mm Cement Concrete course of 1:1.5:3 cement: coarse sand: 20 mm Stone Aggregate) 102 Bitumen Road PWD1.granular sub-base With material conforming to Grade-I (size range 75 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.2.granular sub-base With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 125 mm layer thickness.3. Providing, laying, Spreading & Compacting graded stone aggregateto wet mix macadam. (150 mm thickness)4. Providing & applying PrimeCoat with medium bitumen VG 10 on prepared surfacespreading primer at the rate of 0.75 Kg./Sqm.5.P/L of 40mm thick BC with 100-120 TPH batch type HMP Producing and Avg. Output of 75 TPH using crushed aggt. Of specified grading premixed with bituminous binder VG 30 @ 5.5 %6.Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set spraying using 98 kg of bitumen of grade VG - 10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size7. Providing all necessary barricating and road painting work. 103 Supply of all material, labour, T&P and construct RCC thrust blocks at the bends etc. complete. 104 From 150 mm 105 Supply of following sizes D.I.D./F sluice value as per I.S. 14846:2000 working presure 10 kg/cm^2F.O.R. destination and all texes and insurance 106 D. I. D/F Sluice Valve 107 150 mm dia 108 200 mm dia 109 Carting of following sizes D.I.D./F Sluice Valve and specials to site of work and lowering them into the trenches, fixing in position and jointingthem with pipelines and testing etc. complete including supply of jointing materials. 110 D. I. D/F Sluice Valve 111 150 mm dia 112 200 mm dia 113 Supply of all material labour, T&P etc. Required and construct of Sluice Valve Chamber Masonry Type as per type design. 114 Provide all materials labour T&P etc. complete and construct Pump house size (3.6x3.0x3.0)m Chlorinating room size (2.60x1.80x3.0)m as per departmental type design and drawing (drawing No‐D‐2) and as per the specifications for civil work given in the bid document including supply of all material labour and T&P etc complete as per instructions of Engineer ‐in-charge. 115 Construction of O.H.T. 116 Supply of all materials labour T&P etc. complete and construction of R.C.C. (M-30 Grade) Over Head Tank of following capacity and staging above ground level with all work complete, including cost of soil testing. All the components of OHT will be casted in M-30 concrete with cement, coarse sand and approved stone grit as per I.S. 11682, I.S.3370 part (I) & (II) and I.S.456.Minimum depth of foundation below original ground level will be 2.5M. Seismic effects and wind load should be taken into consideration as I.S. 1893 for earthquake resistance and as per I.S. 875 part-III for wind load on structure (this area is in seismic Zone IV and high damage risk zone for wind).The cost of OHT should be quoted assuming the bearing capacity of soil as 8 M.T.per sqm. including 1M wide RCC staircase from ground level to balcony. M.S. ladder made of 50x50x6 mm angle section and 20mm plain M.S. bars(specification of M.S. should be as per IS 800-2007)with hand rails of 20mm medium class G.I. pipes on both sides in three rows from 117 balcony to top dome resting on an RCC platform (75cmx75cm and 10cm thick) projecting from top ring beam and one aluminum ladder inside the tank body (from manhole in top dome to bottom as per design and specification approved by Engineer in charge. 1 m wide R.C.C. M-30 balcony around the tank at the junction point of vertical wall and conical wall. Proper railing of 20mm diamedium class G.I. pipe (in 3 rows) on both sides of stair case, around the balcony, at each landing and from landing with top ring beam upto manhole on the top dome and at the periphery of top dome. The G.I. Pipes will be supported on M.S. posts made ofor RCC post,spaced at intervals not more than 1.5m.Proper ventilator at top dome in circular shape of 1.2 m dia. along with an R.C.C. cover of minimum 1.50m dia and with mosquito net of standard quality along withexpanded metaled jali between top dome and RCC cover. Water level indicator fabricated with good quality minimum45mm x 45mm section, of 3mm thick M.S. plate should have a clear width of minimum 25cm painted with good paint with brass wire rope, pulley, copper ball float, pointer etc.Lightening conductor should be as per I.S.S.2309 or its latest amendments of latest electricity rules. C.I. manhole cover of min 60x60cm size with locking arrangement, Supply, fixing & jointing of D.I.D./F Pipes (for inlet, outlet, washout and overflow pipes) and specials, duck foot bend and fixing of the sluicevalve at outlet and wash out pipe with all specials; construction of sluice valve chamber, floor and apron with semi circular drain around the apron with 25mm PCC 1:2:4 over 75 mm PCC 1:4:8, Apex painting on outer surface of OHT, painting on MS ladder, railing, vertical pipe etc. as per approved make; excavation in all type of soil and all other works required for proper and complete construction of OHT, testing of tank for water tightness as per the satisfaction of Engineer In-Charge. 118 Zone 1, 700Kl Capacity / 20M staging 119 Zone 2, 800Kl Capacity / 22M staging 120 Zone 3, 900Kl Capacity / 22M staging 121 CONSTRUCTION OF NEW BOUNDARY WALL, APPROACH ROAD AND GATE 122 Construction of boundary wall around pumphouse and O.H.T as per type design including supply of all Materials, Labour, Tools and Plants etc. complete. 123 Supply & fixing of 3.60 M & 1.20 M wide MS Gate including fabrication and supply of steel and construction of boundary pillars all complete. 124 Supply Earth filling in plingth including filling, dressing and ramming earth or sand or bajari or ballast or kankar or shingle. 125 Construction of interlocking approach road with both side brick Eadge and earth filling including supply of all materials, labour, tools and plants etc. complete. 126 Construction of MCS, centralized control room including supply of all materials, labour, T & P complete. 127 Construction of chlorine dosing room including supply of all materials, labour, T & P etc. complete. 128 E / M works 129 For Zone - 01 (New TW -02 Nos.) 900 LPM 130 Transportation of Rig Machine & its T&P/equipments to the site of work including loading & unloading, baricating, erection & dismantling etc. 131 Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc. 132 Transportation of OP Unit and its T&P including loading & unloading. erection &dismantling etc. 133 DC Drilling upto 165M 134 Drilling of 600 mm. dia bore from G.L. to 60 m BGL. 135 Drilling of 500 mm. dia bore from 60 mto 100 m BGL. 136 Drilling of 500 mm.dia bore from 100 M bglto 165 m BGL. 137 LOWERING OFTUBE WELLASSEMBLYAND SHROUDINGOF TW BY GRAVEL 138 Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 150mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165 m BGL. 139 300mm dia MS ERW pipe from G.L. to 54 mBGL 140 150 mm.dia M.S ERWplain/ slotted pipe from 54 m BGL to 100 m BGL 141 150 mm.dia M.S ERWplain/ slotted pipe from 100 m BGL to 150 m BGL 142 TUBE WELL ASSEMBLY : Supply including loading & unloading of TW assembly of MSERW pipe. 143 M.S. Tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) well cap, bail pliug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect. 144 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick ,required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect . 145 150mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mmthick , 1 noM.S. bail plug , required center guide etc comp in all respect. 146 PEA- GRAVEL 147 Supply of 1.6 mm to 4.8 mm size pea gravel duly screened and washed as per IS 4097 148 DEVELOPMNET OF TUBE WELL 149 Development of Tube well by 250 PSI Compressoras per IS-11189 including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 150 DEVELOPMENT OF TUBE WELL BY 3 Cusec O.P. UNIT AS PER IS 2800 :- 151 Development of Tube well by 3 Cusec O.P. Unit including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 152 TEST : 153 Chemical and Bacteriological test of water sample from departmental approved lab 154 Electrical Logging of the Bore 155 Barricading Arrangement at Site during construction of TW & Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development( Compressor & O.P.Unit) of work. 156 Pumping Plant including Servo Stablizer and Chlorinating Plant 900 LPM/55 M Head - 02 Nos( 02 Nos. for New TW) 157 SITC of900 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900rpm, 20 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), earthing, painting, Toolset, Power wiring of pump house internal and external, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing etc. 158 Fully automatic ServoVoltage Stabilizer having(25 KVA or suitable capacity as per actual site requirements and as per direction of Engineer in Charge) fully copper winding 3- phase A.C. Supply 50 Hz.input voltage 200 V output voltage 470 V with T/F oil ,power cable & earthing etc.complete in all respect or as per direction of engineer in charge/ as per site requirement. 159 SCADA compatable chlorinatingSystem 160 CE / UL certified Intelligent smart energy meter 161 Motor OperatedActuator with Sluice Valve (150mm) 162 CE / UL certified Electromagnetic flowmeter of size:150mm 163 Digital Soft starter (15 KW) 164 Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (100 Amps) 165 CE / UL certified Hydrostatatic type sub soil water level transmitter 166 CE / UL certified Pressure Transmitter 167 CE / UL certified Surge protector for control panel 168 CE / UL certified 7 HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters 169 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 170 Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse upto meter 171 Fully Automation of TW & OHT through SCADA complete in all respect including mobile based app development and interconnection with MCS and central control room Lucknow with CE&UL Certified PLC/RTU in IP54 including GSM/GPRS based wireless communication with 4G modem for RTU/PLC or as per direction of engineer in charge/ as per site requirement. 172 Automation ofESR Through SCADA For Zone - 1 173 Double Solenoid Flow Control Valve 200 mm dia 174 Double Solenoid Flow Control Valve 250 mm dia 175 CE / UL certified Pressure Transmitter 176 CE / UL certified Electromagnetic flowmeter of size 200 mm dia 177 CE / UL certified Electromagnetic flowmeter of size 250 mm dia 178 Resedual Chlorine Analyser 179 Required Equipments to br install at OHT 180 Motor operated Sluice Valve with Actuator 300 mm dia Size 181 Electromagnetic Flowmeter 300 mm dia Size 182 Ultrasonic Level Sensor 183 For Zone - 02 (New TW -02 Nos.) 900 LPM 184 Transportation of Rig Machine & its T&P/equipments to the site of work including loading & unloading, baricating, erection & dismantling etc. 185 Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc. 186 Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc. 187 DC Drilling upto 165M 188 Drilling of 600 mm. dia bore from G.L. to 60 m BGL. 189 Drilling of 500 mm. dia bore from 60 mto 100 m BGL. 190 Drilling of 500 mm.dia bore from 100 M bglto 165 m BGL. 191 LOWERING OFTUBE WELLASSEMBLYAND SHROUDINGOF TW BY GRAVEL 192 Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 150mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165 m BGL. 193 300mm dia MS ERW pipe from G.L. to 54 mBGL 194 150 mm.dia M.S ERWplain/ slotted pipe from 54 m BGL to 100 m BGL 195 150 mm.dia M.S ERWplain/ slotted pipe from 100 m BGL to 150 m BGL 196 TUBE WELL ASSEMBLY : Supply including loading & unloading of TW assembly of MSERW pipe. 197 M.S. Tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) well cap, bail pliug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect. 198 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick ,required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect . 199 150mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mmthick , 1 noM.S. bail plug , required center guide etc comp in all respect. 200 PEA- GRAVEL 201 Supply of 1.6 mm to 4.8 mm size pea gravel duly screened and washed as per IS 4097 202 DEVELOPMNET OF TUBE WELL 203 Development of Tube well by 250 PSI Compressoras per IS-11189 including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 204 DEVELOPMENT OF TUBE WELL BY 3 Cusec O.P. UNIT AS PER IS 2800 :- 205 Development of Tube well by 3 Cusec O.P. Unit including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 206 TEST : 207 Chemical and Bacteriological test of water sample from departmental approved lab 208 Electrical Logging of the Bore 209 Barricading Arrangement at Site during construction of TW & Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development( Compressor & O.P.Unit) of work. 210 Pumping Plant including Servo Stablizer and Chlorinating Plant 900 LPM/55 M Head - 02 Nos( 02 Nos. for New TW) 211 SITC of900 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900rpm, 20 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), earthing, painting, Toolset, Power wiring of pump house internal and external, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing etc. 212 Fully automatic ServoVoltage Stabilizer having(25 KVA or suitable capacity as per actual site requirements and as per direction of Engineer in Charge) fully copper winding 3- phase A.C. Supply 50 Hz.input voltage 200 V output voltage 470 V with T/F oil ,power cable & earthing etc.complete in all respect or as per direction of engineer in charge/ as per site requirement. 213 SCADA compatable chlorinatingSystem 214 CE / UL certified Intelligent smart energy meter 215 Motor OperatedActuator with Sluice Valve (150mm) 216 CE / UL certified Electromagnetic flowmeter of size:150mm 217 Digital Soft starter (15 KW) 218 Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (100 Amps) 219 CE / UL certified Hydrostatatic type sub soil water level transmitter 220 CE / UL certified Pressure Transmitter 221 CE / UL certified Surge protector for control panel 222 CE / UL certified 7 HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters 223 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 224 Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse upto meter 225 Fully Automation of TW & OHT through SCADA complete in all respect including mobile based app development and interconnection with MCS and central control room Lucknow with CE&UL Certified PLC/RTU in IP54 including GSM/GPRS based wireless communication with 4G modem for RTU/PLC or as per direction of engineer in charge/ as per site requirement. 226 Automation ofESR Through SCADA For Zone - 2 227 Double Solenoid Flow Control Valve 200 mm dia 228 Double Solenoid Flow Control Valve 250 mm dia 229 CE / UL certified Pressure Transmitter 230 CE / UL certified Electromagnetic flowmeter of size 200 mm dia 231 CE / UL certified Electromagnetic flowmeter of size 250 mm dia 232 Resedual Chlorine Analyser 233 Required Equipments to br install at OHT 234 Motor operated Sluice Valve with Actuator 300 mm dia Size 235 Electromagnetic Flowmeter 300 mm dia Size 236 Ultrasonic Level Sensor 237 For Zone - 03 (New TW -02 Nos.) 1100 LPM 238 Transportation of Rig Machine & its T&P/equipments to the site of work including loading & unloading, baricating, erection & dismantling etc. 239 Transportation of Air Compressor and its T&P including loading & unloading, erection & dismantling etc. 240 Transportation of OP Unit and its T&P including loading & unloading. erection & dismantling etc. 241 DC Drilling upto 165M 242 Drilling of 600 mm. dia bore from G.L. to 60 m BGL. 243 Drilling of 500 mm. dia bore from 60 mto 100 m BGL. 244 Drilling of 500 mm.dia bore from 100 M bglto 165 m BGL. 245 LOWERING OFTUBE WELLASSEMBLYAND SHROUDINGOF TW BY GRAVEL 246 Welding and lowering of TW Assembly (including electrodes welding set and generator etc. required for completion of work) as per following : Lowering of 300mm X 200mm dia (tube well assembly in bore hole and shrouding of pea gravel between annular space of bore hole and T.W. assembly from G.L. to 165 m BGL. 247 300mm dia MS ERW pipe from G.L. to 54 mBGL 248 200 mm.dia M.S ERWplain/ slotted pipe from 54 m BGL to 100 m BGL 249 200 mm.dia M.S ERWplain/ slotted pipe from 100 m BGL to 150 m BGL 250 TUBE WELL ASSEMBLY : Supply including loading & unloading of TW assembly of MSERW pipe. 251 M.S. Tubewell assembly with all required parts like plain pipe, slotted pipe (as required upto 50% of plain pipes) well cap, bail pliug, clamp, reducer, centre guide, support structure etc as required & as per typed design complete in all respect. 252 300mm dia size MSERW housing pipe 7.1mm thick including with 1 no 200 X 150mm dia M.S reducer 16mm thick, 1 noM.S. well cap 12mm thick ,required M.S. ring 100X12mm thick, M.S. S/I clamp ,T.W. Support (I Section) etc complete in all respect . 253 150mm dia MSERW 7.1mm thick plain /slotted pipe including with required M.S ring 100X12mmthick , 1 noM.S. bail plug , required center guide etc comp in all respect. 254 PEA- GRAVEL 255 Supply of 1.6 mm to 4.8 mm size pea gravel duly screened and washed as per IS 4097 256 DEVELOPMNET OF TUBE WELL 257 Development of Tube well by 250 PSI Compressoras per IS-11189 including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 258 DEVELOPMENT OF TUBE WELL BY 3 Cusec O.P. UNIT AS PER IS 2800 :- 259 Development of Tube well by 3 Cusec O.P. Unit including Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development of work. 260 TEST : 261 Chemical and Bacteriological test of water sample from departmental approved lab 262 Electrical Logging of the Bore 263 Barricading Arrangement at Site during construction of TW & Cutting of T.W. cover by gas cutter, re-welding of T.W. cover by Electric welding after complete development( Compressor & O.P.Unit) of work. 264 Pumping Plant including Servo Stablizer and Chlorinating Plant 1100 LPM/55 M Head - 02 Nos( 02 Nos. for New TW) 265 SITC of1100 LPM, 55 m head or suitable head as per site condition and direction of engineer in charge 2900rpm, 25 HP submersible clear water pumping plant suitable to operate on 415+ %5 volt, 50 Hz, 3 phase A.C. supply (as per IS 8034-1989) with 150 mm dia size 24 meter column pipe, 150 mm dia NRV, 150 mm dia CI D/F Bend 90 Degree, 150 mm dia CI A/F Tee, 150 mm dia D/F pipe (1.5 m long 2 nos. and 1 m long 1 no.), earthing, painting, Toolset, Power wiring of pump house internal and external, 2 Tonne chainpully block P-type indef make, and all pumping plant accessories with nut bolts and rubber packing etc. 266 Fully automatic ServoVoltage Stabilizer having(25 KVA or suitable capacity as per actual site requirements and as per direction of Engineer in Charge) fully copper winding 3- phase A.C. Supply 50 Hz.input voltage 200 V output voltage 470 V with T/F oil ,power cable & earthing etc.complete in all respect or as per direction of engineer in charge/ as per site requirement. 267 SCADA compatable chlorinatingSystem 268 CE / UL certified Intelligent smart energy meter 269 Motor OperatedActuator with Sluice Valve (150mm) 270 CE / UL certified Electromagnetic flowmeter of size:150mm 271 Digital Soft starter (22 KW) 272 Auto phase reversal unit with inbuilt time delay & enclosure conforming to IEC: 60947-1 & IEC:60947-b-1) (125 Amps) 273 CE / UL certified Hydrostatatic type sub soil water level transmitter 274 CE / UL certified Pressure Transmitter 275 CE / UL certified Surge protector for control panel 276 CE / UL certified 7 HMI touchscreen suitable to communicate with PLC/RTU, for local display & control of process parameters 277 Control panel with IP 54 protection, industrial grade fro all equipments (separate for control (24V) and power equipments. 278 Complete Cabling for tubewell including all power & control cables of all equipment at pumphouse upto meter 279 Fully Automation of TW & OHT through SCADA complete in all respect including mobile based app development and interconnection with MCS and central control room Lucknow with CE&UL Certified PLC/RTU in IP54 including GSM/GPRS based wireless communication with 4G modem for RTU/PLC or as per direction of engineer in charge/ as per site requirement. 280 Automation ofESR Through SCADA For Zone - 3 281 Double Solenoid Flow Control Valve 300 mm dia 282 Double Solenoid Flow Control Valve 250 mm dia 283 CE / UL certified Pressure Transmitter 284 CE / UL certified Electromagnetic flowmeter of size 300 mm dia 285 CE / UL certified Electromagnetic flowmeter of size 250 mm dia 286 Resedual Chlorine Analyser 287 Required Equipments to br install at OHT 288 Motor operated Sluice Valve with Actuator 300 mm dia Size 289 Electromagnetic Flowmeter 300 mm dia Size 290 Ultrasonic Level Sensor 291 Supply, installation,testing & Commissioning of SCADA LCS For Zone 01 to 03 292 Scada LCS (Local Control Station) complete in all respector as per direction of engineer in charge/ as per site requirement. 293 Three Month Trial & Run of TW, LCS, Pumping plant with consumable items till handing over includingwatch & ward .
Contract Date: Ref. Documents Contract Value : ₹ Ref. Document
Government Departments No of Bidders 6
Uttar Pradesh View Result →
TenderDetail
Loading tenders