Menu
    

Sand Filter Tenders from India

182 Sand Filtertenders are published by various Tendering Authorities & Private companies. 182 live Tender for Sand Filter are available in Sand Filter Tender section You can further filter Sand Filter tenders by Tender Value, Tender Submission Date or Project Location.

Search Result
Tender 1 - 10 of 182 from India
Sort By:
Closing Date
Jan162017
Closing Date
Jan302017

TDR: 11438577
Location: Rajasthan - India
Tender Value: Ref. Document

Supply Of Filter Sand Live


Closing Date
Jan252017

TDR: 11411033
Location: Jammu And Kashmir - India
Tender Value: Ref. Document

Supply Of Machinery And Equipments ( 1 Concrete Technology Laboratory 1.01 "Analogue Compression Testing Machine• Conforming To Is: 14858 ( 2000 ) And Calibrated With An Accuracy Of ± 1% As Per The Requirement Of 1828 ( Class1 ) •• Comprising Of Loading Unit, Pumping Unit, Digital Display. • Capacity - 2000Kn. • Lc-1Kn • Max Vertical 370Mm Clearance, • Max. Horizontal 340Mm Clearance, Platen Size • Dia 220 Mm And Piston Dia 222.25 Mm. • Piston Stroke 50 Mm • Specimen Size:- 100Mm & 150Mm Cube, 100Mm & Dia 150Mm Dia Cylinder • The Hydraulic Pumping Unit Should Be Electrically Operated. The Loads Should Be Measured On Bourdon Tube Type Load Gauges Which Should Be Calibrated Against Certified Proving Rings. The Load Gauges Should Be Fitted With A Maximum Load Pointer And Pumping Units Should Operate With Two-Speed Design. In The Electrically Operated Pumping Units, Load Gauge Should Be Fitted With Micro Switches To Switch-Off The Motor When The Load Approaches The Maximum Capacity Of The Gauge. • Suitable For Operation On 220V, 50Hz, Single Phase, Ac Supply • Complete With All Optional Accessories • Commissioning And Training Should Be Included In The Offer" 1.02 "Blaine’S Air Permeability Apparatus • Consisting Of Permeability Cell, U Tube Manometer Mounted On A Stand With A Stop Cock, Perforated Disk, Plunger Rubber Stopper, Rubber Tube 30 Cm Long, Packet Of Filter Paper Discs, And A Bottle Of 100 Cc Dibutyiphthalate Liquid Confirming To Is 4031, 5516, 1727 And 4828. • Complete With All Optional Accessories" 1.03 "Curing Tank. • Temperature Range: – 50 C To 1000 C. The Tank Should Accommodate150 Mm / 70.6 Mm Cubes Upto 36 / 72 Cubes And Fully Insulated Covered With A Hinged Lid, Heater, Thermostat And Recirculation Pump. Provision Of Two Removable Racks With Free Circulation Of Water Around Each Cube, Pump, Drain Valve Etc Complete• Complete With All Optional Accessories" 1.04 "Los Angeles Abrasion Testing Machine: • Consisting Of Hollow Cylinder Mounted On A Sturdy Frame On Ball Bearings. A Detachable Shelf Which Extends Throughout The Inside Length Of The Drum, Catches The Abrasive Charge And Does Not Allow It To Fall On The Cover. The Drum Is Rotated At A Speed Of 30 – 33 Rpm By An Electric Motor Through A Heavy Duty Reduction Gear With A Tray Provided For Sample Collection Etc Complete. • Complete With All Optional Accessories" 1.05 "Cube Moulds 1 ) Cube Mould ( 70.6 Mm ) With I.S.I Mark Is: 10080-1982 2 ) Cube Mould ( 150 Mm ) With I.S.I Mark, Is: 10086-1982 3 ) Cylinder Mould ( 150Mm X 300 Mm ) With Isi Mark 4 ) Beam Mould ( 150Mm X 150Mm X 700 Mm ) With Isi Mark 5 ) Beam Mould ( 100Mm X 100Mm X 500 Mm ) With Isi Mark" 1.06 "Slump Test Apparatus • Confirming To Is: 7320-1974 • Size:- 100 Mm Dia At The Top, 200 Mm Dia At The Bottom, And 300 Mm High With Two Cleats And Lifting Handles. • A Base Plate With Clamping Arrangement For The Slump Cone And A Swivel Handle Which Also Serves As The Datum For Measuring The Slump. • A Tamping Rod 1.6 Cm Dia And 60 Cm Long With One End Rounded And Graduated From 0 To 15 Cm In 0.5 Cm Spacing To Measure The Slump. • Complete With All Optional Accessories" 1.07 "Flakiness Index Test Gauge • Conforming To Is – 2386 ( Part I ) • Made Up Of Heavy Gauge Sheet Steel • Isi Certification Marked" 1.08 "Elongation Index Test Gauge • Conforming To Is – 2386 ( Part I ) • Made Up Of Heavy Gauge Sheet Steel Isi Certification Marked" 1.09 "Digital Balance • 5Kg, 10Kg, 20 Kg ( Platform Type ) Capacity Sensitivity 1Gm. • Complete With All Optional Accessories" 1.1 "Pan Balance • Capacity 20 Kg • Accuracy 2 Gm • Along With Standard Weights • Complete With All Optional Accessories" 1.11 "Vacate Apparatus, With Dashp • Conforming To Is: 5513-1976 • Consisting Of A Frame With A Vertically Movable Rod Having A Cap At The Top. • Vicat Mould In The Form Of Frustum Of A Cone With Internal Diameter Of 60 Mm At The Top, 70 Mm At The Bottom And A Height Of 40 Mm. • Glass Base Plate For The Mould. • Initial Setting Time Needle. • Final Setting Time Needle. • Consistency Plunger. • Complete With All Optional Accessories " 1.12 "Le Chatelier Mould • Conforming To Is: 5514-1969 • One Split Cylinder 30 Mm Dia X 30 Mm High Made Of Spring Brass With Two Indicator Arms, Two Glass Plates. • One Lead Weight Approximately 100 G. • Le Chatelier Water Bath. • Double Walled Water Bath Made From Heavy Gauge Copper Sheet For Maintaining The Temperature Of Water At 27+ 20 C. Glass Wool Insulation To Be Provided Between The Walls. An Immersion Type Heater, With Thermostat And A Sunvic Energy Regulator Provided For Controlling The Temperature. A Removable Rack To Hold Twelve Standard Le-Chatlier Moulds. • Suitable For Operation On 220 / 230 V, 50 Hz, Single Phase Supply. Complete With All Optional Accessories" 1.13 "Laboratory Oven • Heating Elements Made Up Of High Grade ( Kanthai ) Resistance Wire. Heaters Are Fitted / Wound Along All The Sides Of The Oven. Complete With Two Pilot Lamps, Plug Pins. • Temperature Range : - 50º To 250º ±1º C • Air Circulation Fitted For Proper Air Circulation. • Fitted With Digital Temperature Indicator Cum Controller. • Stainless Steel Chambers. • Size -600 X 600 X 600 Mm • No. Of Trays-3 • Rating-2.5Kw, Complete With All Optional Accessories " 1.14 "Standard Sieve Set For Coarse Aggregate• As Per Is 460 1962 • 30Cm Dia Made Of G.I Frame With Joint I.S Meshes Complete Set With Lid And Pan. • Size:- 63Mm, 50Mm, 40Mm, 31.5Mm, 25Mm, 20Mm, 16Mm, 12.5Mm, 10Mm, 6.3Mm, 4.75Mm • Complete With All Optional Accessories" 1.15 "Standard Set Of Sieve For Fine Aggregate• As Per Is 460 1962 • Made Of Polished Brass Frame 20 Cm Dia, Without Joint And Tightly Fitting With Each Other 4.75Mm To 75 Micron Is Sieve With Lid And Pan Complete. • 4.75, 3.35, 2.8, 2.36, 3.00, 1.70, 1.40, 1.18, 1.00Mm, 600 Μm, 300 Μm, 212 Μm, 180 Μm, 150 Μm, 125 Μm, 106 Μm, 90 Μm, 75 Μm • Complete With All Optional Accessories" 1.16 "Cement Mortar Cube Vibrator• Conforming To Is:4031, Is 10080-1982 • Mounted Over Coiled Springs Having A Revolving Eccentric Shaft • Motorized • Suitable For Operation On 220V, 50Hz, Single Phase Ac Supply • Having Supporting Springs, Springs For Fitting Mould, Belt, Belt Guard And Eccentric Shaft With Bearing • Having Time Switch One 7.06 Cm Isi Marked Cube Mould With Hopper. Complete With All Optional Accessories" 1.17 "Motorized Sieve Shaker• Sturdy Cast Iron Body, Inclined Sieve Table Which Can Accommodate A Maximum Of Eight Sieves Of 300 Mm Dia • Adoptor For 200 Mm Dia Sieves • Adjustable Top Clamping Plate To Hold The Sieves • Table Having A Gyratory Motion Inz Addition To Up And Down Jolting Action • Suitable For Operating On 220 V, 50 Hz, Single Phase Supply • Time Switch Adjustable From 0-60 Minutes, • Complete With All Optional Accessories" 1.18 "Compaction Factor Test Apparatus• Conforming To Is:7320 • Consisting Of Two Conical Hoppers With Trap Doors • Upper Hopper-Top Internal Dia = 25.4 Cm, Bottom Internal Dia = 12.7 Cm And Internal Ht.=27.9 Cm • Lower Hopper- Top Internal Dia = 22.9 Cm, Bottom Internal Dia = 12.7 Cm And Internal Ht.=22.9Cm • One Cylindrical Receiver - Internal Dia=15.2Cm, Internal Ht.30.5 Cm • A Welded Steel Stand For Mounting The Hoppers And The Receiver Co-Axially At Specified Distances • Two Trowels • One Hand Scoop • One Standard Tamping Rod 16Mm Dia And 60 Cm Long With One End Rounded • Complete With All Optional Accessories" 1.19 "Density Basket• Conforming To Is:2386 ( Iii ) • Made Up Of Galvanized Wire Mesh • Size 20Cm Dia X 20Cm Height • Complete With All Optional Accessories" 1.2 "Bulk Density Apparatus:-• Conforming To Is:2386 ( Iii ) , Is:1199 • Cylindrical Metal Measures – 3 Litres, 15 Litres, 30 Litres • Tamping Rod 16 Mm Dia – 60 Cm Long • Complete With All Optional Accessories" 1.21 Vee Bee Consist Meter:-As Per Is119 Consisting Of Vibrating Table 380Mm Long And 260Mm Wide. Resting Upon Elastic Support At A Height Of About 305Mm Above The Floor Complete With Start / Stop Switch, Cord And Plug. A Holder Is Fixed To The Base Into Which A Swivel Arm Is Telescoped With Funnel And Guide Sleeve. The Swivel Arm Is Also Detachable From The Vibrating Table. A Graduated Rod Is Fixed On A Swivel Arm And At Its End A Plastic Disc Is Screwed. The Divisions Of Scale On The Rod Record The Slump Of The Rod Record The Slump Of The Concrete In Millmeters. Supplied Complete With A Sheet Metal Container With Lifting Handles Which Can Easily Be Fixed To The Vibrating Table. A Slump Cone Open At Both Ends With Lifting Handles And A Tamping Rod Of Size 16Mm Dia And 600Mm Long, Rounded At One End. 1.22 Flow Table:-Consisting Of Flow Table Top 76.2 Cm Of Solid Brass Casting, Integrally Cast Ribs, Stand, Electric Geared Motor Confirming To Is 1199. 1.23 Vibrating Table:- Having Load Carrying Capacity Of 140 Kg, Consisting Of A Motor With Variable Pitch Pulley, Cross Arm, Speed Regulation Handle. 1.24 "Digital Rebound Hammer:- • Should Conform To Astm C-805, En 12 504-2, Bs -1881-202 And Other International Standards. • Should Features 16 Character Digital Read Out And Provide Automatic Calculation Of Mean Rebound Number, Compressive Strength • Should Come With Rechargeable Batteries. The Charger Should Be Provided • Should Provide For Calculating The Mean, The Median And Compressive Strength. Capability Of On-Board Data Storage And Transfer To A Personal Computer For Further Analysis Is Required. The Necessary Software And The Required Cables For Connecting To The Computer Should Be Provided. • A Calibration Anvil Should Be Provided" 1.25 "Ultrasonic Pulse Velocity Meter:- • Should Allow For Measurements In The Direct Transmission, Semi-Direct Transmission And Surface Transmission Modes. • Should Be Portable, Light Weight With Battery And A-C Power And Come With A Rugged And Splash Resistant Case. • Should Allow Direct Digital Read-Out Of Transit Time • Should Come With Built-In Wave Form Display On Lcd, Which Should Be A Daylight Visible Display • Simple Calibration; Preferably, No Special Bar Should Be Required. If A Calibration Bar Is Required, It Should Be Supplied With The V-Meter. • Should Provide Transmitter Output Voltage Up To 1000V. The Applied Pulse Width Should Not Be Greater Than 2 Micro-Seconds • The Transit Time Measurement Between 0.1 To 6500 Microseconds With A Measurement Accuracy Of 0.1 Microseconds • Direct Reading Of Calculated P-Wave Velocity And S-Wave Velocity Should Be Available • Direct Reading Of Calculated Modulus Of Elasticity And Poisson’S Ratio Should Be Available. • Should Have The Capability Of Recording Signals In The Instrument For Review On The Screen Or For Transfer To The Computer. • Signal And Trigger Output Option Should Be Available. Have The Capability Of Recording Measurements In The Main Memory And Transferring The Data To A Pc. Output For Uploading To Computer Should Be Available And Provided Preferably Over The Usb Interface. The Necessary Cable For Connecting To The Computer Should Be Provided. The Software For Uploading The Data To Pc Should Be Provded. Remote Control From Pc With Option To Produce Control Programs On A Pc For Different Application Is Prefered. Rechargeable Battery Should Allow For A Minimum Of 4 Hours Of Continuous Use. Specification For Transducer Pairs Of Compression And Shear Wave, Ultra Soic Transducers With Stainless Steel Housing For Testing Of Concrete And Other Coarse-Grained Materials Of The Following Frequencies Should Be Supplied With The Unit:54 Khz; 150Khz And 1 Mhz." 2 Soil Mechanic Laboratory 2.01 "Infra Red Moisture Meter:-• Conforming To Is:2720 ( Ii ) • Capacity – 10 G Approx • Sensitivity – 5 Mg Approx • Range Of The Stuff Gauge – 0 – 1 Gm • Reading Accuracy :– +, - 20 % • Range Of Thermoregulation – 75 – 160° • Dia Of Scale Pan – 100 Mm Complete With All Optional Accessories" 2.02 "Liquid Limit Apparatus:- • Conforming To Is:2720 ( V ) , Is:9259 • Consisting Of Hard Rubber Base Carrying Sliding Carriage Assembly With Brass Cup Hinged To It. • Casagrande Grooving Tool, Gauge Block • Manually Operated Counter. • Complete With All Optional Accessories" 2.03 "Plastic Limit Apparatus:- • Conforming To Is:2720 ( V ) – 1985 • Consisting Of Glass Plate, Brass Rod, Spatula, Moisture Tin And Porcelain Dish • Complete With All Optional Accessories" 2.04 "Shrinkage Limit Apparatus:-• Conforming To Is:2720 ( Vi ) , 10077 • Consisting Of Porcelain Evaporating Dish, Shrinkage Dish, Glass Cup, Perpex Plate With Three Metal Prongs, Perpex Plain Plate, Spatula, Graduated Glass Cylinder 25 Ml X 0.5 Ml, Mercury 750 Gm, Straight Edge Etc Complete • Complete With All Optional Accessories" 2.05 "Pycnometer:- • Conforming To Is:2386 ( Iii ) • Consisting Of 1 Kg Glass Jar With Brass Cone, Locking Ring And Rubber Seal Complete With All Optional Accessories" 2.06 "California Bearing Ration Test Apparatus ( Motorised ) :-• Conforming To Is:2720 ( Xvi ) – 1985 • Electrically Operated Of Motorised Load Frame, Capacity 5000Kg, • Two Speed Operation – 1.5, 1.25 Mm / Minute • Mould- Gun Metal 150 X 175 Mm • Perforated Base Plate, Penetration Piston, Extension Collar - Gun Metal 150 X 50 Mm • Metal Space Disc, Annular Metal Weight, Slotted Metal Weight, Proving Ring, Dial Gauges, Tripod Stand, Cutting Collar, Rammer 2.6 Kg Weight With Drop Of 310 Mm, Rammer 4.89 Kg Weight With Drop Of 450 Mm Etc Complete As Per Is 2720 ( Xvi ) Complete With All Optional Accessories" 2.07 "Core Cutter:- • Conforming To Is: 2720 ( Xxix ) • Consisting Of Cylindrical Core Cutter 100 Mm Dia And 130 Mm Long, Steel Dolly 25 Mm High, Rammer With Steel Rod Etc Complete • Complete With All Optional Accessories" 2.08 "Sand Replacement Test Apparatus:-• Conforming To Is: 2720 ( Part 28 ) • Consisting Of Sand Pouring Cylinder Fitted With Conical Funnel And Shutter – Capacity 3 Ltr. • Cylindrical Calibration Cylinder 150 Mm Id X 150 Mm Height. • Metal Tray – 300 X 300 X 40 Mm With 10 Cm Central Hole. • Complete With All Optional Accessories" 2.09 "Standard Proctor Test Apparatus:-• Consisting Of Compaction Mould 150 Mm Internal Dia X 127.3 Mm Height • Volume 2250 Ml • Collar, Base Plate All Made Of Mild Steel • Fixing Tie Rods Of Mild Steel With Nuts • Compaction Rammer – Heavy – Mild Steel – 4.89 Kg Weight, 50 Mm Face Dia, 450 Mm Controlled Free Vertical Fall. • Complete With All Optional Accessories" 2.1 Direct Shear Apparatus:-Electrically Operated Consisting Of Loading Unit Shear Box Assembly, Surcharge Weight Set, Proving Ring 2 Kn Capacity, Two Dial Gauges 0 – 25 X 0.01 Mm, Specimen Cutter Etc Complete As Per Is 2720 ( Viii ) 2.11 Unconfined Compression Testing Machine:- Electrically Operated Consisting Of A Screw Operated Load Frame Of Capacity 5000 Kg With A Gear Box And Motor Drive Giving 1.25, 1.5 And 2.5 Mm / Min Rates Of Strain, Cone Seating, Proving Ring, Dial Gauges Etc Complete As Per Is 2720 ( X ) 2.12 Triaxial Test Apparatus:-Confirming To Is 2720 Part Xi, Xii, Bs 1377, 1924. Electrically Operated, Motorised, Sample Dia 38 – 100Mm , Dial Gauges, Pore Pressure Apparatus, Proving Ring, Constant Pressure System Etc Complete. 2.13 Vane Shear Test:-Laboratory Purpose As Per Is 270 Part Xxx Electrically Operator Rates Of Rotation 1 / 60 Rpm Simple Phase Complete With Manual. 3 Highway Engineering Laboratory 3.01 "Cleveland Flash Point And Fire Point Apparatus:-• Conforming To Is: 1448 ( Part 69 ) . Consisting Of Cleveland Flash Cup In Brass With Insulated Handle, Metal Heating Plate With Circular Opening Covered With Abestos Board. An Electric Heater With Energy Regulator Gas Test Jet Assembly Suitable For Operation On 220V, 50Hz, Single Phase Supply. Complete With All Optional Accessories. " 3.02 Standard Tar Viscometer:-• Conforming To Is: 1206 • Consisting Of A Chrome Plated Copper Bath, With A Drain Valve And A Central Tube To Receive The Test Cup And To Position The Stirrer, And Is Mounted On A Stand With Levelling Feet. Stirrer Has A Curved Shield And Is Provided With An Insulated Handle, Thermometer Socket And A Swivel Support For The Valve. • Complete With 10Mm Cup And Ball Valve • Complete With All Optional Accessories. 3.03 "Bitumen Penetrometer:- • Conforming To Is: 1448 ( Part 60 ) • Consisting Of Steel Base, Adjustable Feet For Levelling. • Plunger Weighing 47.5 Gm And One Each Of 50 Gm And 100 Gm Weight Including Cone And Penetration Unit. • Automatic Inbuilt Timer • Penetration Needle, Copper Transfer Dish, Aluminium Sample Container – 2 Sets. Complete With All Optional Accessories" 3.04 "Ring And Ball Apparatus:-• Conforming To Is: 1205 • Consisting Of Magnetic Stirrer With Heating Facility And Digital Display Of Temperature. • Tapered Rings, Ball Centring Guide, Steel Balls 9.5 Mm Dia, Ring Roller And Electric Heater • Suitable For Operation On 220 V, 50 Hz, Single Phase Ac Supply • Complete With All Optional Accessories" 3.05 "Hot Plate:-• Rectangular With Energy Regulator, 300×450×180Mm, 2.0 Kw. • Complete With All Optional Accessories" 3.06 "Aggregate Crushing Value Apparatus:- • Conforming To Is: 9376 - 1979 • Consisting Of Steel Cylinder 150 Mm Dia, Plunger And A Steel Base Plate. • Surface Coming In Contact With Aggregate Should Be Case Hardened. Complete With All Optional Accessories" 3.07 "Aggregate Impact Test Apparatus:-• • Conforming To Is: 9377 - 1979 • Consisting Of Heavy Circular Base With Two Vertical Guides Fitted With A Cross Bar At Top • A Hammer Of 13.75 Kg Mass Which Can Be Raised And Allowed To Fall Freely Through 380 + - 5 Mm With Locking Arrangement • A Cylindrical Cup, Metal Measure And A Tamping Rod 10 Mm Dia X 230 Mm Long • Complete With All Optional Accessories" 3.08 Ductility Testing Apparatus:-Consisting Of Water Bath With Thermostatic Heater, Circulating Pump, Briquette Mould, Motor And Gears, Graduated Scale Etc Complete As Per Is 1958, 1028 3.09 Stripping Value Apparatus:- Consisting Of A Circular Tray Rotating In A Vertical Plane At A Rate Of Approximately 100 Rpm By An Electric Geared Motor, Four Bottles Mounted On Circular Tray, Time Switch Etc Complete. 3.1 Centrifuge Extractor:- Consisting Of A Removable Aluminium Rotor Bowl Of Capacity 1500 Gm With Cap And Tightening Nut, Electric Motor And Gear Etc Complete As Per Astm D2172 4 Surveying Laboratory 4.01 "Metric Chain:- Heavy Duty With Swivel Handle, Brass Talleys, Brass Rings Etc Complete Length - 20M And 30 M" 4.02 "Cross Staff:- • Open Type, Having 4 Vanes At Right Angles. • Leather / Wooden Case. • Pole ( Wooden / Steel ) With Heavy Duty Iron Shoe At The Base." 4.03 "Electronic Theodolite ( Including All Standard Accessories ) :- • Along With All Standard Accessories, Tool Kit With Case, Carrying Case, Rain Cover And Manual. • Telescopic Length : 149 Mm • Magnification : 30 X • Resolving Power : 3'' • Min. Focus : 1.35M • Field Of View : 1°30'' • Least Count : 1"" • Accuracy : 2"" • Compensating Range : ±3'' • Display : Both Side • Plate Level Senstivity : 30"" / 2Mm • Circular Level Senstivity : 8'' / 2Mm • Battery Back Up: 36 Hours • Rechargable Battery • Battery Charger • Battery Pack For 4Aa Batteies • Wooden Telescopic Tripod • Complete With All Optional Accessories" 4.04 "Reflector Less Electronic Total Station:-• Along With All Standard Accessories ( Power Cable, Lens Cap, Lens Hood, Tool Pouch, Screwdriver, Lens Brush, Adjustingpin X 2, Cleaning Cloth, Operation Manual, Laser Caution Sign-Board, Carrying Case & Carrying Strap ) . • Magnification : 30 X • Least Count : 1"" • Accuracy : 5"" • Reflectorless Range : 500 M • Distance Measuring Range With Single Prism ( Under Good Conditions ) : 5000 M • Distance Accuracy : ± ( 2Mm + 2Ppm X D ) M.S.E. • Display : Single Side • Data Storage : Internal Memory & Usb • Internal Memory : 10, 000 Points • Plug-In Memory Device : Usb Flash Upto 8Gb • Battery Backup: Approx.36 Hours. • Rechargeable Li-Ion Battery • Battery Charger • Wooden Telescopic Tripod • Single Prism Assembly, Consisting Of Prism With Holder And Target Plate, Prism Pole With Bubble , Prism Pole Tripod Complete With All Optional Accessories" 4.05 "Tilting Level:- • Internal Focusing Fitted With Horizontal Circle, Bubble Tube Complete. • Fibre / Leather Box. Aluminium Stand. Complete With All Optional Accessories" 4.06 "Tangent Clinometer:- • With Rack & Pinion Arrangement, Bubble & Leveling Screws. Complete In A Leather Sling Case. Complete With All Optional Accessories" 4.07 "Ghat Tracer:- • Cylone Type, With Rack Adjustment. • Divisions From 1 In 6 To 1In 120 Angle Of Elevation And Depression. • Complete In Box With Stand & Target. • Complete With All Optional Accessories" 4.08 "Pantograph:- • With Castors Or Spring Clips. Brass Type Graduated Arms. Size 600Mm / 24” • Complete With All Optional Accessories" 4.09 "Abney Level:-• Size: 125Mm Complete In A Durable Cover Complete With All Optional Accessories" 4.1 "Digital Planimeter:- • Roller Type With Computing Function, • Precision= .2%; • Internal Rechargeable Battery With 30 Hr Back Up; • 6 Digit Display • Carrying Case And Manual Complete With All Optional Accessories" 4.11 "Prismatic Compass:- • Consisting Of A Brass Metal Circular Box, Having A Diameter Of 125 Mm. • Highly Magnetized Needle On A Hard Steel Pointed Pivot Balanced At The Centre Of The Box. • Aluminum Circle Consisting Of A Needle, Which Is Graduated To 30 Min. ( 0. 50 ) With Engraved Inverted Figures. • Graduations Should Be Magnified By Sliding The Prism Fitted With Colored Glasses Having A Sighting Slit At The Top Complete With All Standard Accessories." 4.12 "Plane Table :- Complete With All Standard Accessories. Plane Table Board: 600 X 750 X 16Mm Plane Table Stand: Aluminium, Heavy Duty Plane Table Head: 151 Specification Ball And Socket Type. Magnetic Compass: 150Mm Brass Spirit Level: 150Mm Brass Alidade : Telescopic ( Isi Standard ) Pancake Coils Single Layer: Brass Plumb Bob : Brass Canvas Cover: Full " 4.13 Ranging Rod:- Made Of Mild Steel, 3 M High, Alternate Red And White Paint Strips, Flag At Top, And Metal Shoe. 5 Applied Mechanics Laboratory 5.01 "Universal Table:- • For Experimentally Verifying The Laws Of Triangle, Parallelogram And Polygon Of Forces. • Equal Circular 40Cm Dia Aluminium Disc, Graduated Into 360 Divisions ( Degree ) Complete With Levelling Screws Clamping Device To Fix The Table At Any Desired Angle, 5 Sliding Clamp Pulleys Central Ring String And Five Sets Of Iron Nickel Led Slotted Weights And One Hanger Of 15Gm Each. Complete With All Optional Accessories" 5.02 "Parallelogram Law Of Forces Apparatus:- • A Wooden Board 50X60cm With Wall Brackets, Two Frictionless Clamp Pulleys, And Three Set Of Slotted Weights Of Nickel Led Each Set Containing Nine Weight And One Hanger Of 50Gms Complete With All Optional Accessories" 5.03 "Polygon Law Of Forces Apparatus:- • Consisting Of Wooden Board Of 70X70cm Size, Provided With Two Wall Brackets And 4 Adjustable Frictionless Aluminium Pulleys And 5 Set Of Slotted Iron Nickel Led Each Set Containing 9 Weight And One Hanger Of 50Gms. Complete With All Optional Accessories" 5.04 "Simply Supported Beam Apparatus:- • Span Of 1.0M Consisting Of 2 Compression Thrust Type 10 Kg Tubular Spring Balances Fixed On Wooden Polished Board, A Wooden Bar With Steel Back Plate. Completed With Stirrups, Hooks And Two One Kg Weights. Complete With All Optional Accessories" 5.05 "Friction Slide Apparatus:- • Consisting Of A 15X60cm Wooden Board With A Glass Top Hinged On A Iron Base To Which A Sector With Graduated Arc And Vertical Scale Is Provided. The Plane May Be Clamped At Any Angle Up To 60.A 5Cm Frictionless Pulley Is Attached To The End By Means Of A Clamp Adjustable To Any Necessary Position. One Set Of Three Wooden Carriages With Different Bottom Surface ( Wooden, Glass, Iron ) Complete With All Optional Accessories" 5.06 "Worm And Worm Wheel Apparatus:-• Consisting Of A Machine Cut Worm Gear Of 25Cm Dia Carrying A Metal Drum Of 12Cm Dia And Machine Cut Worm On Steel Spindle Carried 12Cm Dia Pulley. The Whole Arrangement Is Fixed On Heavy Cast Iron Bracket Capable To Be Fixed To A Wall. Complete With Effort Pulley, String And Hooks • Complete With All Optional Accessories" 5.07 "Screw Jack:-• All Metallic Construction Accurately Machine Cut Screw With V Pitch Of 5Mm Carrying Double Flanged Turned Table Of About 20 Cm Dia.Fitted On A Heavy Cast Iron Base And Complete With 2 Adjustable Pulleys, Cord And Hooks. • Complete With All Optional Accessories" 5.08 "Winch Crab Single Purchase:- • Fitted With Heavy Cast Iron Ball Brackets. The Grooved Wheel Is Of 25Cm Dia And Gears Are Machine Cut. • Complete With All Optional Accessories" 5.09 "Winch Crab Double Purchase:- • Fitted With Heavy Cast Iron Ball Brackets. The Grooved Wheel Is Of 25Cm Dia And Gears Are Machine Cut. Double Set Of Gearing Arrangements. • Complete With All Optional Accessories" 5.1 "Moment Of Inertia Of A Fly Wheel Apparatus:- • 20Cm Dia Comprising Of Carefully Machine And Balanced Cast Iron Wheel And Steel Spindle In Support On Ball Bearing In Strong Iron Bracket .The Wheel Is Smoothly Painted Black And Is Marked With A Line.A Pointer Is Fixed To One Of The Brackets. Diametric Hole Is Drilled In The Shaft To Take A Pin And Cord The Base Is Provided With Holes So That The Apparatus Can Be Fixed To Wall • Complete With All Optional Accessories" 5.11 "Simple Jib Crane:- • Consisting Of A Tubular Compression Balance Pivoted About An Axis And Fitted To The Base. The Tie Chain Has An Adjustable Angle Bracket And Fitted With A 10Kg Extension Balance. Complete Wooden Base With 1.2M Jib. • Complete With All Optional Accessories" 5.12 "First System Of Pulley Apparatus:- • Complete Wall Fixing Set With 5 Nos Of Single Pulley. • Complete With All Optional Accessories" 5.13 "Second System Of Pulley Apparatus:- • Complete Wall Fixing Set With 2 Nos Of Triple Pulley Block. • Complete With All Optional Accessories" 5.14 "Searls Apparatus:- • Consisting Of Two Metallic Frames Suspended From A Rigid Support With The Help Of Experimental Wire And Compensating Wire. • Slotted Weights With Hanger • Spirit Level • Sphero Meter • Cross Bar • Complete With All Optional Accessories" 6 Environmental Engineering Laboratory 6.01 Clarrifloculator:-Electrically Operated, Motorized, Consisting Of Glass Jars, Agitators, Controlling Unit Etc Complete. 6.02 "Dissolved Oxygen Meter:-Range: 0.00 To 19.99Ppm Resolution: 0.01 Ppm Accuracy: ± 1.5% Fs Temperature Range Range: 0.0 To + 100.0°C Resolution: 0.1°C Accuracy: ± 0.2°C " 6.03 Total Dissolved Solids Meter:-Range 0 – 99.9 Ppm, Resolution 0.1 Ppm, Accuracy ± 2Ppm, Tds Factor User Adjustable 0.5 To 0.85, Automatic Shut Off Etc Complete 6.04 "Residual Chlorine Meter:-Display Range:0-2.000, 0-20.00 Ppm, Accuracy: ± 0.01 Ppm Repeatability: ± 0.01 Ppm Linearity: 0.1% Of F.S. Power: 115 / 230 Vac, 50 / 60 Hz., 10 Va, Operating Conditions: -20-60°C, 0-95% R.H. Non-Condensing" 6.05 Conductivity Meter:- Conductivity Range 6 Auto–Selected From 0 To 1999Ms, Conductivity Resolution 0.01Μs To 1Ms, Conductivity Accuracy ±0.5% ±2 Digits 6.06 "Digital P H Meter:- Graphic Display With On-Screen Instructions 50-Set Memory ( Ph, Temp, Date And Time Stamp ) Automatic Calibration And Buffer Recognition Ip67 Waterproof Housing User-Replaceable Single- Or Double-Junction Electrodes Digital Ph Range: 0.00 To 14.00 Units Temperature Range: 32.0 To 212 °F ( 0 To 100 °C ) Ph Resolution: 0.01 Units Temperature Resolution: 0.2 °F ( 0.1 °C Ph Accuracy: ±1 Unit Within 10 °C Of Calibration, ±0.2 Unit Within 20 °C Temperature Accuracy: ±0.6 °F ( ±0.3 °C ) " 7 Fluid Mechanic Laboratory 7.01 "Hydraulic Bench With Apparatus / Accessories:- Providing, Supplying And Installing A Self-Contained, Recalculating Hydraulic Bench Along With Necessary Attachable Accessories / Apparatus / Instrument Confirming To Following Requirements Along With Associated Lab Manuals ( Hard As Well As Soft Copy ) , Calibration Report If Any, Demonstration, Commissioning, Training By Technical Expert . A ) Hydraulic Bench The Unit Should Have A Fhp Centrifugal Pump Fitted For Water Circulation, Flow Control Valve And By-Pass Valve Fitted In Water Line To Conduct The Experiment For Different Flow Rates, Top Tray To Collect Water From Experimental Set-Up, Drains And Sump Tank Etc., The Dimensions And Specification Of Various Units Of Hydraulic Bench A ) Top Tray : Size 1000 X 700 X 100 Mm ( Approx ) B ) Water Circulation : 1 Hp Pump, C ) Flow Measurement: Using Measuring Tank, Capacity 40 Ltrs. D ) Sump Tank : Capacity 100 Ltrs. E ) Stop Watch : Electronic. F ) Control Panel Comprises Of Standard Make On / Off Switch, Mains Indicator, Etc. G ) Tanks And Top Tray Will Be Made Of Stainless Steel ( Ss-304 ) . The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. The Hydraulic Bench Is To Be Supplied With Following Accessories / Apparatus / Instrument As Per The Given Requirement Bernoulli''s Theorem Apparatus It Should Have A Test Section Made Of Acrylic, Convergent And Divergent Sections. Pressure Tapings Are Required At Different Locations In Convergent And Divergent Sect Ion. The Set-Up Is To Be Connected To Hydraulic Bench With Flexible Pipe Line. The Dimensions And Specification Of Various Units Of Bernoulli''s Apparatus A ) Test Section : Material Acrylic ( One Piece ) . Apparatus For Flow Over Orifice Meter And Venturimeter The Apparatus Should Consists Of Two Pipelines Emerging Out From A Common Manifold. One Pipe Line Contain A Venturi Meter And Other Contains An Orifice. The Pressure Tapings From The Venturi Meter And Orifice Meter Are Taken To Differential Manometer To Measure Pressure Difference. The Venturi Meter And Orifice Meter To Be Connected In Parallel So That Any One Of Them Can Be Put In Operation By Operating Valves Provided At The Downstream And The Flow Can Also Be Regulated At The Same Time. The Set-Up Is To Be Connected To Hydraulic Bench With Flexible Pipe Line. The Dimensions And Specification Of Various Units Of Orifice Meter And Venturi Meter Apparatus A ) Venturi Meter : Material Clear Acrylic Compatible To 1”Dia. Pipe. B ) Orifice Meter : Material Clear Acrylic Compatible To 1” Dia. Pipe. C ) The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. Iii Apparatus For Flow Over Notch The Setup Should Consist Of A Channel With Deepened Entry Section Having Sufficient Length And Width In Which Water Is Supplied From The Bottom. Required Notch Is Fitted At One End Of This Channel. A Gauge Well Is Provided Where A Hook Gauge Is Fitted. There Should Be An Arrangement For Fixing Interchangeable Notches. Set Of 3 Brass Notches, I.E. Rectangular Notch, 60° V Notch & 45° V Notch Is To Be Provided Along With The Set-Up. The Set-Up Can Be Connected To Hydraulic Bench With Flexible Pipe Lin The Dimensions And Specification Of Various Units Of Apparatus For Flow Over Notch A ) Channel Test Section : 600 X 250 X 180 Mm Made Of Stainless Steel. B ) Notches : Material Brass ( 3 Nos. ) 1. Rectangular Notch 2. 45° V Notch 3. 60° V Notch C ) Hook / Pointer Gauge : With Vernier Scale. D ) The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. Iv ) Apparatus For Flow Through Orifice And Mouth Piece It Should Consist Of A Tank Provided With Inlet Supply Diffuser, Overflow Outlet. Provision For Fitting Orifice Or Mouthpiece At The Same Position Is Has To Be Provided. An Arrangement Has To Be There To Vary Head And Keep It Constant At Desired Level. A Hook / Pointer Gauge Arrangement For Measuring X-Y Coordinates Of Jet Trajectory Is Also To Be Provided. The Set-Up Is To Be Connected To Hydraulic Bench By Flexible Pipe Line. The Dimensions And Specification Of Various Units Of Apparatus For Flow Through Orifice And Mouthpiece A ) Set Of Orifices : Material Acrylic ( 2 Nos. ) Dia. 10Mm And 15 Mm B ) Set Of Mouthpieces : Material Acrylic ( 3 Nos. ) Dia 10 Mm ( L / D = 2.5 ) Dia 10 Mm ( L / D = 4 ) Dia 10 Mm ( L / D = 1 ) C ) Hook / Pointer Gauge : To Measure X-Y Co Co-Ordinates Of Jet. D ) Water Tank: Suitable Capacity, Having Arrangement To Vary Water Head And Keep It Constant. E ) Tanks Will Be Made Of Stainless Steel. F ) The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. ) Apparatus To Determine Losses Due To Friction In Pipe The Setup Should Consist Of 2 Pipes Of Different Dia, Which Are Connected In Parallel. Pressure Tapings Are To Be Provided On Each Pipe To Measure The Pressure Losses With The Help Of A Differential Manometer. Control Valves Are To Be Fitted On Each Pipe, Which Enables To Use One Pipe At A Time For Experiment. The Set-Up Is To Be Connected To Hydraulic Bench By Flexible Pipeline. The Dimensions And Specification Of Various Units Of Apparatus To Determine Losses Due To Friction In Pipe A ) Pipes ( 2 Nos. ) : Material Gi Of ½” & 1” Diameter. B ) Pipe Test Section : Length 1 M. C ) The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. Vi ) Apparatus To Determine Losses Due To Pipe Fittings The Set Up Should Include 1 / 2"" Bend And Elbow, A Sudden Expansion & A Sudden Contraction Fitting From 15Mm To 25Mm, Ball Valve And Gate Valve. Pressure Tapings Are To Be Provided At Inlet And Outlet Of These Fittings Under Test. A Differential Manometer To Be Fitted In The Line To Derive Pressure Loss Of Individual Fittings. The Set-Up Is To Be Connected To Hydraulic Bench By Flexible Pipe Line. The Dimensions And Specification Of Various Units Of Apparatus To Determine Losses Due To Friction In Pipe Fittings A ) Sudden Enlargement : From 15Mm To 25Mm B ) Sudden Contraction : From 25Mm To 15Mm. C ) Bend : 1 / 2 “ D ) Elbow : 1 / 2 “ E ) Ball Valve : 1 / 2 “ F ) Gate Valve : 1 / 2 “ G ) The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. Vii ) Pitot-Tube Set-Up For Velocity Determination A Pitot Tube Of Standard Design Made Of Copper / Stainless Steel Is To Be Supplied And Is To Be Fixed Below A Vernier Scale. The Vernier Scale Should Be Capable Of Measuring The Position Of Pitot Tube In Transparent Pipe Section. The Pipe Should Have A Flow Control Valve To Regulate The Flow. An U-Tube Manometer Is To Be Provided To Determine The Velocity Head. The Dimensions And Specification Of Various Units Of Pitot-Tube Setup A ) Pitot Tube Material: Copper / Ss. B ) Hook / Pointer Gauge : With Vernier Scale. C ) Test Section Material: Clear Acrylic, Compatible To 1"" Dia. Pipe. D ) The Whole Set-Up Has To Be Well Designed And Arranged In A Good Quality Painted Structure. Viii ) Pressure Measurement Set-Up The Set-Up Is To Be Made Up Of Different Pressure Measurement Devices Fitted In A Pipe Line, In Which An Orifice Is Fitted To Create The Pressure." 8 Enngineering Models 8.01 "Building Construction Models:- • Dog Legged Stairs • Open Well Stair • Quarter Turn Stairs • Bifurcated Stairs • Geometrical Stairs • Lean To Roof • King Post Truss • Queen Post Truss • Steel Roof Truss • Roof Showing Hip And Valley • Spread Footing • Column Footing • Pile Foundation • Grillage Foundation • Bricklayer’S Scaffolding • Raking Shore • Flying Shore • Centering Of Arch • Carpentry Joints • Bricks, Closers, Bats • Two Room And Verandah • G+1 Building • Jack Arch Flooring • T Beam & Slab Reinforcement • Fully Paneled Door • Half Paneled & Half Glazed Door • Sash Door • Ledged & Braced Door • Flush Door • Louvred Or Venetain Window • Double Hung Window • Sliding Window • Casement Window, • Awning Window, Hopper Window, Bay Window " 8.02 "Water Supply & Waste Water Engineering Models• Slow Filter • Rapid Sand Filter • Pressure Filter • Safe Water Supply From A Pond • Safe Water Supply From A River • Sedimentation Tank • Flocculator • Trickling Filter • Indian Type Water Closet • European Water Closet • Septic Tank • Imhoff Tank • Automatic Flushing Tank Canal / River Intake" 8.03 "Engineering Drawing Models – Dissected And Non Dissected:-• Rectangular Prism • Rectangular Pyramid • Triangular Prism • Triangular Pyramid • Square Prism • Square Pyramid • Pentagonal Prism • Pentagonal Pyramid • Hexagonal Prism • Hexagonal Pyramid • Octagonal Prism • Octagonal Pyramid • Decagonal Prism • Decagonal Pyramid • Cube 20 X 20 Cm • Skeleton Cube 20 X 20 Cm • Cone • Cylinder • Carpentry Joints• Cylinder • Semi-Cylinder Quarter-Cylinder • Tetrahedron • Octahedron • Circle • Double Cross • Single Cross • Model Plates ( Set Of 7 ) Dissected Solids • Cube Cut In Two Right Angles • Sphere 10 Cm Dia Cut In Two Hemispheres • Cylinder Cut In Two Semi-Cylinders • Cone Cut At An Oblique Angle • Pyramid Triangular Cut In Two Parts • Triangular Prism Cut In Two Parts Parallel To Base • Tetrahedron Having Each Side 15 Cm & Cut In Two Parts Parallel To Base Parallel Piped Dissectable In Two Triangular Prisms" 9 Draughtsman Civil 9.01 "G.P.S • Channels – 220 • Positioning Output Rate: 1Hz~50Hz • Initialization Time: < 10S • Initialization Reliability: >99.99% • Signal Tracking O Bds B1, B2, B3 O Gps L1c / A, L1c, L2c, L2e, L5 O Glonass L1c / A, L1p, L2c / A, L2p, L3 O Sbas L1c / A, L5 ( Just For The Satellites Supporting L5 ) O Galileo Giove-A, Giove-B, E1, E5a, E5b O Qzss, Waas, Msas, Egnos, Gagan, Sbas • Positioning Precision O Horizontal: 0.25 M + 1 Ppm O Vertical: 0.50 M + 1 Ppm O Sbas Positioning Accuracy: Typically<5M 3Drms O Horizontal: 2.5 Mm + 0.5 Ppm O Vertical: 5 Mm + 0.5 Ppm O Horizontal: 8 Mm + 1 Ppm O Vertical: 15 Mm + 1 Ppm O Horizontal: 8 Mm + 0.5 Ppm O Vertical: 15 Mm + 0.5 Ppm • Dimension 12.9 Cm×11.2Cm • Weight - 970G ( Including Installed Battery ) • Material - Magnesium Aluminum Alloy Shell • Power Consumption – 2W • Battery - Rechargeable, Removable Lithium-Ion Battery • Battery Life - Single Battery: 7H ( Static Mode ) 5H ( Internal Uhf Base Mode ) 6H ( Rover Mode ) • I / O Port - 5Pin Lemo External Power Port + Rs232 7Pin Lemo Rs232 + Usb, 1 Network / Radio Data Link Antenna Port, Sim Card Slot • Wireless Modem Integrated Internal Radio Receiver And Transmitter 0.5W / 2W External Radio Transmitter 5W / 25W • Working Frequency 410-470Mhz • Cellular Mobile Network - Wcdma3.5G Network Communication Module, Gprs / Edge Compatible, Cdma2000 / Evdo 3G Optional • Double Module Bluetooth - Blebluetooth 4.0 Standard, Support For Android, Ios Cellphone Connection Bluetooth 2.1 + Edr Standard • Data Storage - 4Gb Internal Storage, More Than 3 Years Raw Observation Data ( About 1.4M / Day ) , Based On Recording From 14 Satellites Plug And Play Mode Of Usb Data Transmission Data Format - Differential Data Format: Cmr+, • Cmrx, Rtcm 2.1, Rtcm 2.3, Rtcm 3.0, Rtcm 3.1, Rtcm 3.2 Gps Output Data Format: Nmea 0183, Pjk Plane Coordinates, Binary Code Network Model Support: Vrs, Fkp, Mac, Supporting Ntrip Protocol • Quarter-Cylinder • Tetrahedron • Octahedron • Circle, Double Cross • Single Cross • Model Plates ( Set Of 7 ) Dissected Solids • Cube Cut In Two Right Angles • Sphere 10 Cm Dia Cut In Two Hemispheres • Cylinder Cut In Two Semi-Cylinders • Cone Cut At An Oblique Angle • Pyramid Triangular Cut In Two Parts • Triangular Prism Cut In Two Parts Parallel To Base • Tetrahedron Having Each Side 15 Cm & Cut In Two Parts Parallel To Base Parallel Piped Dissectable In Two Triangular Prisms " 9.02 "Automatic Level:- Magnification 32X, Standard Deviation Per Km ( Double Run Level ) = 2.0Mm Accessories: Stand: Aluminium ( Heavy Duty ) -1No Staff: Aluminium ( 4M Folding ) -1No" ) Live



Sample Tenders