BRR:7524157 SITC of 10 Mtr Solar High Mast with 4 nos luminaries at Different location under Coochbehar District.; Supply of Solar High Mast, with 2 Day Autonomy, having 4 Luminaries of 60W each with Colour Temperature of 3000K/6000K. 10 Meter GI High mast, designed to sustain a wind speed of 180 KM/hr, with 4Pcs of 60W Led fixture enclosed in Pressure die cast Aluminum Housing, powder coated in silver grey and with Toughened glass, The 240W of Light will be backed up and powered by More than 2150 Wh of Lithium Ferrous Phosphate Based Battery Backup and the system will be charged by 670Wp of Solar PolyCrystalline PV Modules. (335Wp X 2 Modules) 10 Meter Polygonal Pole, GI with necessary mounting arrangement for Solar PV Module & Light Fittings Mounting arrangement should be such that it is easy to maintain 4 Units of 60W LED Light with secondary Lens, in Aluminum Die Casting, IP66 Protection, Auto Switching Dask to Dawn, Led Driver cum charge controller should be equipped with the following features, MPPT based charge controller with Three stage battery charge monitoring algorithm, Greater than 90 percent efficiency, Short Circuit Protection, Battery Over- charge Protection, Battery Deep Discharge Protection, PV Reverse Voltage Polarity Protection, Battery Reverse Voltage Polarity Protection, Software Watch-dog for LED Over-current Protection, (Zero Dark Spot at ground level) LiFePO4 Battery should be BIS approved, with easily replaceable mounting and wiring arrangement; having no mid wire joins. Specifications of Pole: 1. 20-Sided Polygonal Pole 2. Bottom - 350mm; Top - 150mm; Thickness - 5mm; Base Plate – 520mm; PCD – 440mm 3. 4-Sided Header with 8mm SS Rope Earthing Details: 50mm X 6Ft Earthing Pipe (Pipe in Pipe Model) with Chemical Backfill Compound Display Board of size 3ft X 2 ft with pole mounting arrangement. 2 Units of 335Wp in 24V Voc Solar PV Modules Polycrystalline with RFID Tag All wirings with the modules should be made using 4Sqmm Solar cables, the connection with the Modules to be made using MC4 Connectors. System must have an inbuilt Remote Monitoring System, integrated with MPPT charge controller and it would record the parameters at a fixed interval of 10 Minutes, Recorded data should be available in the PDF, XLS, JPED, PNG & SVG Format with the Data logging of the following parameters 1. Battery: Voltage/Current/Power 2. Solar PV Module: Voltage/Current/Power 3. Load: ON-Off Status/Voltage/Current/Power 4. Fault description5. Site Co-ordinates

BRR:7515123 Supply Of Led Spares To Amc Procurement Of 90/110 Watt Led Street Light Materials For Street Light Maintenance In Amc Area Including Agartala Fly Over Bridge, Radhanagar Bridge Area Under Agartala Municipal Corporation , Heading , Procurement Of 110Watt Led Driver With Complete Housingof Current Capacity- 0.7 A, Uin- 240Vac,Frequency -50 Hz, Lin-0.29 Aac, Powerfactor-0.95,Uout -43-140Vdcof Makephilips/ Crompton/K-Lite /Vis Certified Company.110 Watt Led Driver Of Integratedhousing ( Materials Are To Be Supplied As Per Sample Kept In The Electrical Store Andand As Per Direction Of Engineer-In-Charge) Warranty -02 Years , Procurement Of 90 Watt Mcpcb Of Make Philips/ Cormpton /K-Lite/Vis Certified Company. 90 Watt Mcpcb Of Size 150Cm X100mm= 175 Nos; 125Mmx125mm = 120 Nos; 125Mm X 100Mm =70 Nos. (85Mm X 40Mm ) X2=65 Nos (Materials Are To Be Supplied As Per Sample Kept In The Electrical Store And As Per Direction Of Engineer-In-Charge). Replacement Warrenty 02 Years , Procurement Of 110 Watt Mcpcb Of Make Philips/ Crompton/ K-Lite /Vis Certified Company . 110Watt Mcpcb Of Size 200Mm X145mm = 1450Nos ( Materials Are To Be Supplied As Per Sample Kept In The Electrical Store And As Per Direction Of Engineer-In-Charge). Replacement Warrenty 02 Years

BRR:7514366 Tender For Addn/Altn To Qtr At Bhagat Road, Fafa Under Ge (W) Jalandhar Cantt; 1 Demolition of cement concrete in ground floor and paving n.exc 15 cm thick (below or above ground level complete all as spd and directed . 2 Demolition of brick or stone masonary built in cement mortar complete all as spd and directed. 3 Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc 4 M&L brick work with sub-class B bricks, straight or curved on plan exceeding 6 M mean radius built in CM 1:6 complete all as spd and directed 5 M&L brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as spd and directed. 6 M&LCement concrete type D 2, 1:4:8 (using 40 mm gradedstone aggregate) in sub base of flooring, hard standing,Manhole, drain etc. 7 M&L 75mm thick PCC 1:3:6 type C2 (using 40mm graded stone aggr) as in plinth protection/path finishing the surface even and smooth without using extra cement complete all as spd and directed. Note : Plinth protection shall be laid in (1:20) slope. The concrete shall be laid at a stretch not exceeding 3metre in length. Joint gap between adjoining slab, at corners and at junctions ofwalls shallnot exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen 85/ 25 grade mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3 metre interval at corner and as junction of walls complete all as spd and directed. 8 M&L 10mm thick rendering in CM 1:3 onbrick/concrete surfaceas in ceiling and finishing the surface even and smooth with out using extra cement. complete all as spd and directed. 9 Removing old lime wash (if any), hacking for key, raking out joints of old brick work or stone work built in lime or mud mortar; not previously plastered;and scrubbing down with water etc. to receive plaster, walls are built in cement or cement lime mortar.complete all as spd and directed. 10 M&L 15mm thick rendering with water proofing liquid as per manufacturere instruction of approved make : Like : Sica/Dr Fixit/Fosroc on wall in CM 1:4 onbrick/concrete surfaceand finishing the surface even and smooth with out using extra cement complete all as spd and directed. 11 M&L 15mm thick rendering on wall in CM 1:6 onbrick/concrete surfaceand finishing the surface even and smooth with out using extra cement complete all as spd and directed. 12 Demolition of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish of the premises complete all as spd and directed. 13 M&L colouredGlazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over 10 mm thick cement plaster in CM 1:4 complete all as spd and directed. 14 Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as spd and directed. 15 M & L for applying neat cement slurry with 3.0kg of cement per sq. metre complete all as spd and directed. 16 M & L Non skid Coloured ceramic tiles 7 to 8 mm thick (squre or rectangle) area of each tile exce 0.11 SqM but not exceeding 0.18 SqMinfloors etc, set and jointed in neat cement slurry and pinted in white or coloured cement to match with including 15mm thick screed bed in CM 1:6. complete all as spd and directed. 17 M&L Machine cut kota stone slab flooring 18 - 20mm thick over 20mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finished complete all as spd and directed. 18 M&L Machine cut kota stone slab flooring 18 - 20mm thick as in skiritng, riser of steps etc laid over 10mm thick cement plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing upto mirror finished complete all as spd and directed. 19 Demolition of re-inforced cement concrete of any description and in anypositionnot otherwise specifically provided for complete all as spd and directed. 20 Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as spd and directed. 21 M & L for Reinforced cement concrete type B1 1:2:4 (20 mm graded aggregate) (nominal mix) inSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd and directed. 22 M&L mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips confomring to GdI IS-432 complete all as spd and directed. 23 Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortercomplete all as spd and directed. 24 M&L 20mm Granite (of any type) work(table rubbed and polished) in steps, jambs , pillars, window cills, cooking platforms, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement screed bed in CM 1:4 complete all as spd and directed. 25 Rounding/mouldingto edges of Kota stone slabs, marble stone, granite stone slabs one edge, such as in steps, cooking platform , and other similar situations etc complete all as spd and directed. 26 M&L for 15mm thickrenderingin1:3 CMwith water proofing liquid as per manufacturere instruction of approved make : Like : Sica/Dr Fixit/Fosroc as in sunken portion complete all as directed. 27 M&L for applying evenly a tack coat of industrial bituminous 85/25 @ 1.20 Kg per sqmincluding cleaning surfaces.complete all as directed. 28 M&L APP based polymeric membrance minimum weight not less than 3.0kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less than 150gms/sqm) land on primed surface by forced application(complete area sealed by gas flame)with over lap of 15 cm complete all as specified and directed complete all as spd and directed. 29 M& L Cement concrete type E-2, 1:5:10 using 40mm graded brick aggregate in foundations filling and mass concrete as in sunken floorcomplete all as spd and directed. 30 Cutting holes into or through brick walls built, in cement mortar Superficial area N.exc 150 sq. cm upto 23cm of depth of wall, complete all as spd and directed. 31 M & L for 50mm dia GI pipe,med grade beveled cut at both ends by making hole in walls sunken portion aprox above the RCC slab and ceiling finished the hole with cement plaster 1:2 to match with existing surface complete etc.(Measured for cutting holes shall be paid in concerned sch item) complete all as spd and directed. 32 Taking down chowkats or frames with shutters (without taking of shutter from the frame)of any description alongwith fittings n.exc 1.5sqm eachcomplete all as spd and directed. 33 Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm eachcomplete all as spd and directed. 34 Taking down shutters any description exc 1 sqm but n.exc 2sqm each and all as specifiedand directed . 35 Taking down shutters of any description not exc 1 Sqm and not exc 2 sqm each and refixing in same opening after necessary all repairingcomplete all as spd and directed. Note : Change of old wiremesh will be measured in connected supply only items. 36 S&F pressed steeldoor framewith one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 105 x60mm complete all as spd and directed. 37 S&F pressed steeldoor framewith one or more rebate including necessary fixing lugs, hinges, lock stricking plate of size 125 x60mm complete all as spd and directed. 38 M&L for PCC Type B0-1:2:4 using 12.5mm graded aggregate as in filling of pressed steel frame, hold fasts and similars articlescomplete all as spd and directed. 39 S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 65x 100 mm, one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as spd and directed. 40 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistur proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. 41 Cutting holes in brick walls incement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required built in cement motar in brick wall depth of embedded portion of holdfast exc half brick but n exc one brickcomplete all as spd and directed. 42 S&F2nd class hardwood rail and style, factoy made plain,framed,panelled shutters (two panel) 35mm thick, with lock rails and panel of 9mm B. W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stile as per IS : 1003 (Part-I), kiln seasoned and chamically pressure treatedcomplete all as spd and directed. 43 S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numberscomplete all as spd and directed. 44 Dismantling of unframed timber scantlingsin fillets, rails, posts, rafters, purlins,etc. under 40 sq. cm in section in any positioncomplete all as spd and directed. 45 Dismantling boarding, any description, fixed in any position with nailsComplete all as spd and directed. 46 S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size Frame size 50 x 100 mm for wardrobe, one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as spd and directed. 47 S & F Factory Made Solid PVC Moulded Door Shutter With Core free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawingcomplete all as spd and directed. 48 Solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube 49 S&F factory made solid panel pvc door shutter 30mm thick (style) consisiting of frame made out ofM.S.Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement,fixing in the frame at the site as per specification & drawing. 50 M & L Powder coated aluminium (minimum thickness of powder coating 50 micron) for sliding window shutters including providing and fixing roller, three track system, locking arrangement fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws where necessary all complete as per architectural drawings and the directions of Engineer-in-charge. 51 S & F powder coated of any colour (Thickness or powder coating not less than 50 micron).aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1 no.)complete all as spd and directed. 52 S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spickes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, rallings, framework of water tanks and similar work conforming to Fe-290 Gde-E-165complete all as spd and directed. 53 S&F Galvanisedmild steel wire cloth, 0.56mm nominal dia of wire and avg erage with aperature 1.18 mm fixed with tinned tacks, or galvanised wire staplescomplete all as spd and directed. 54 M&L for 4.80mm thick sheet glass ordinary quality glazing with oil puttyin squares not exceeding 0.50 Sqm in each pane complete all as specified and directed. 55 Supply only Galvanisedmild steel wire cloth, 0.56mm nominal dia of wire and any width of aparture 1.18mm fixed with alu wire staples fixed to wood/steel framescomplete all as spd and directed. 56 S&F Butt hinges, medium weight cold rolled 100 mm size ISI markedcomplete all as spd and directed. 57 S&F aluminium anodised barrel tower bolts of extruded section 150mm longcomplete all as spd and directed. 58 S&F Extruded aluminium alloy handles fabricated type anodised 150mm sizecomplete all as spd and directed. 59 S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified. 60 S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller platecomplete all as spd and directed. 61 S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150 mmcomplete all as spd and directed. 62 S & F in repair for mild steel pipe 25 mm dia Harrison rails, mild steel, chromium plated with fixing brackets, stops,rollers etc as approved complete all as specified. 63 S&F in replacement 100 mm hasp and staple aluminium anodised including bolt to hinge plate and fixed with screw complete all as specified. 64 Providing and fixing solid PVC Kitchen Cabinet of size 1845 x 770 x 620mm at site made out of 18mm thick one side decorative lamination and other side balancing lamination sheet consisting of car case 18mm thick pvc sheet and provision of shutter made out of 18mm thick one side decorative lamionated PVC sheet all required brackets SS screw etc. the panel shall be febricated using adhessive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish as per make and specification mentioned as per drawing and specification approved by Engr in Charge. 65 S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45x 70 mm for kitchen shelf, one or more rebates comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp- ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madecomplete all as spd and directed. 66 Providing and fixing factory made 18mm thick solid, decorative, WPC(Wood Polymer Composite) laminated board of required size as in shutter comprising of virgin polymer of K value 57-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives made from extrusion process WPC foam sheet single extruded (inner with having minimum density not less than650 kg/cum and screw withdrawal strength of 2000 N (Face) & 1100 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. 67 Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc.including welding grinding,buffing,polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete including fixing the railing with necessary accessories and stainless steel dash fasteners,stainless steel bolts etc,of required size, on the top of floor or the side of waist slab with suitable arrangementcomplete all as spd and directed. 68 Taking up or down 15 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. 69 Taking up or down 20 mm bore steel tubing and connection including cleaning for re-fixing or removal to store complete all as specifed and directed. 70 S&F 15mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. 71 Refixing 15mm old GItubing and connections in new or old position (Walls, ceiling, floors, etc.)complete all as spd and directed. 72 S&F 20 mm bore GI tubing medium grade fitting complete to wall and ceiling or laid in floor complete all as specifed and directed. 73 Refixing 20 mm old GI tubing and connections in new or old position (Walls, ceiling, floors, etc.)complete all as spd and directed. 74 Cutting chases, pinning in making good to facings where reqd and pointing in cement mortar1:3 to ends or edges of shelves , for water tubing etc andmaking good, cutting exc 10cm girth but not exc 20cm girth in stone wallscomplete all as spd and directed. 75 Dismantiling of water tanks of capacity exc 250 & n exc 500 ltrs incl all necessary fittingscomplete all as spd and directed. 76 S&F 500 ltrs PVC rotational moulded polyethylene water storage tanks double layer made (cylindrical vertical with closed top ) hoisted and fixed in position all as spd in SSR part-I complete all as spd and directed. 77 Disconnecting existing tanks, setting aside (or loweringif required)for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning of over head tank 500ltr capacity of any description and capacity, descaling, washing with detergent powder, removing vegetation around the over head tank/plat form complete all as specified and directed. 78 S&F 20mm Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in repair complete all as spd and directed. 79 S&F ball float valve brass with epoxy coated aluminimum rodfor 20 mm bore pipe high pressure with polythelene high density float and complete screwed for iron pipe in repair. complete all as spd and directed. 80 S&F in repair 15mm dia long body Bib taps cast copper alloywith fancy type chromium lated crutch or butterfly handle screwed down, scewed for iron pipes or for brass ferrule complete all as spd and directed. 81 S&F in repair 15mm brass CP bath mixer for mixing hot & cold water screwed down for iron pipe and fixedcomplete all as spd and directed. 82 S&F in repair 15mm brass CP WHB/Sink mixer swan neck for mixing hot & cold water screwed down for iron pipe and fixed.complete all as spd and directed. 83 S&F 15mm dia Brass stop valves chromium plated, fancy type with long shank and cup concealed type screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlori as specified and fixed in repairs. complete all as spd and directed. 84 S&F 15mm dia Brass stop valves chromium plated, fancy type with cup screwed down, highpressure with crutch or butterfly handle, screwed both ends for iron pipe or for unlons as specified and fixed in repairs. 85 S&F 600x450 bevelled edged looking mirror 2mm thick of selected quality glass, mounted on 4 mm thick PVC sheet and with aluminnium frame work fitted with chromium plated brass screws and cup washers including taking old one in repaircomplete all as spd and directed. 86 S&F in Vitreous china corner wash hand basin (385X385X150mm) white, angular back excluding taps,including brackets &32mm waste cuppling complete all as specifed and directed. 87 S&F Vitreous China wash down Water closet pan (pedestal pattern) with plastic water closet seatcover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging divice (excluding flusing cistern and flush pipe) in repairscomplete all as spd and directed. 88 S&F Vitreous China Water closet (Squatting pattern) Orissa Pattern size 580x 440 mm white with P or S trap, front or back inlet and foots rests any pattern (excluding flusing cistern and flush pipe) in repairscomplete all as spd and directed. 89 S&F 10 Litre PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dis for low level cistern in repairscomplete all as spd and directed. 90 S&F 15mm PVC connection 450mm long with PTMT nuts of superior quality as specified in repair. complete all as spd and directed. 91 S&F in toilet paper holder of brass chromium platedfixed to walls with brass screws complete all as spd and directed. 92 Supply and fixed CP Soap dish, any type fixed to walls with plugs with chromium plated brass screwscomplete all as spd and directed. 93 Supply and fixing for glass Shelf with stainless steel railing and 8mm premium quality black glass shelf of size 450mm x 150mm complete all as specified and directed. 94 S&F for brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete all as spd and directed. 95 Supply and fixing for glass Corner Shelf with stainless steel railing and 8mm premium quality black glass shelf of size 12 dia complete all as specified and directed. 96 S&F Health faucet mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified. 97 M&L 75mm PVC (SWR) floor trap , plain with CP grating including jointing with solvent cement complete all as spd and directed. 98 S&F in replacement CP grating 100-125mm dia circularof approved make and fixing with cement mortar 1:3 on Nahani Trap or floor trap complete all as specified. 99 S&F in repair brass chromium plated shower rose 125mm size complete all as spd and directed. 100 Supply in fixing in repairs sink with drainage board made Stainless steel 1mm thickkitchen or laboratory with plugs, washer and wastes pipe , including bedding in cement mortar on dwraf wall orincluding fixing cantilever brackets and connecting union pipe, over all size 915mm x 460mm bowl size 410mm x330mm x160mm.complete all as spd and directed. 101 S & F in replacement stainless steel kitchen plate rack, made out of 1mm thick stainless steel size 30 x 24 x 10 (Miinimum weight 7 Kg) with shelves and plate position as approved complete all as specified and directed. 102 Dismantlingof brick tiles single layer as in roofcovering complete all as specified 103 Demolition of mud in roofs any thicknessincludingplastering and leeping(whether full thickness removed or only a part thereof)complete all as spd and directed. 104 Cleaning/Roughening surfaces of old concerete floor/roof by picking , sweeping clean and washing down with water to romove the dust etc complete all as spd. 105 (i) M&L for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges and PCC pedding with cement concrete type B-1, 1:2:4 (using 12.50mm graded stone aggregate) to top surface of slab in slop 1:40,with using water proofing liquid as per manufacturere instruction of approved make : Like : Sica/Dr Fixit/Fosroc,finishing the surface even and smooth without using extra cement complete all as specified. 106 (ii) M&L 15mm thick rendering with water proofing liquid as per manufacturere instruction of approved make : Like : Sica/Dr Fixit/Fosroc on wall in CM 1:4 onbrick/concrete surfaceand finishing the surface even and smooth with out using extra cement (iii) Providing and applying Epoxy primer (02 fast component resin of hardner) on the prepared surfacev @200gm per Sqm.(iv) Providing and applying Liquid Polyurea - PU based hybrid elestomeric water proofing membrane at existing/newly constructed roofs. Double coat is required on the smooth and cleared surface @ 1.50Kg per Sqm. (v) After coating of primer of two coats of ULTRON (US) a proper protective plaster/layer is to be done by laying Geo textile and 40mm screed on the top of final coating. (Make - Asian Paints, BASF & SIKA) Note:- Ser No (i) to (v) : The application shall be done by the authorised applicator of the manufacture with a letter of proof stating the authenticity of the applicator firm. 107 Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)complete all as spd and directed. 108 Dismantling of cast iron or reinforced concrete drain pipes of size 75-100mm dia, jointed in cement mortarandtakingout of trenches, if required.complete all as spd and directed. 109 S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to wallscomplete all as spd and directed. 110 S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wallscomplete all as spd and directed. 111 S&F110mmPVC (SWR) bendscomplete all as spd and directed. 112 S&F75 mmPVC (SWR) bends complete all as spd and directed. 113 S & F for PVC 110mm (SWR) vent cowlcomplete all as spd and directed. 114 M&L for repairing of R.C.C projections, chajjias, roof slab, facia etc in patches not exceeding 3 Sqm in each patch by necessary preparation. Scarpping, cutting, chiseling derusting and cleaning exposed reinforcement, surfaces of damaged, loose R.,C.C surfaces and applying one coat of rust stop solution of approved make and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggreagates and reinforced with welded TMT bars/mesh (If Reqd) of weight exc 2 kg per sqm but n.exc 3kg/sqm with or without facia and finished with cement and sand motar (1:3) using coarse sand and thickness of R.C.C member n.exc 100mm including necessary form work and applyingtwo coats of finishes to match with the existing surfaces in at any height complete all as specified and directed by Engr-in-charge. (Note : Cost of form work and welded mesh shall be deemed to be included in unit rate quoted by the contractor complete all as specified and as directed. 115 Excavation in trenches not exc 1.5m wide and not exc 1.5m deep for foundation etcfor shafts, wells, cesspits , manholes pier holes, etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soilcomplete all as specified and directed. 116 Demolition and breaking up drain pipes 150mm bore (salt glazed ware, AC or Reinforced) set in cement mortar all as spd and directed 117 M &L for 150mm bore SGSW drain pipe (Grade-A) laid in trenches and jointed in CM 1:1 and tested complete all as spd and directed 118 M&L for concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and testedcomplete all as specified and directed. 119 Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benchingcomplete all as spd and directed. 120 Demolition of re-inforced cement concrete of any description and in anypositionnot otherwise specifically provided forcomplete all as spd and directed. 121 M&L RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in precast RCC manhole / septic tanks ,drain,covers including all form work and setting in CM 1:4 all as specified and shown on drgs. 122 M&L mild steel TMT bars 8mm dia and over cut to length bent to shape required including cranking bending and binding with and including mild steel wire annealed not less than 0.9 mm dia or securing with clips confomring to GdI IS-432complete all as spd and directed. 123 Material and labour for cement concrete 1:2:4 Type B-1using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by the Engineer-in-Charge. 124 M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge 125 M & L for applying one coat of synthetic enamelled paintincluding preparation of old treated wood surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge 126 M & L for applying two coat of synthetic enamelled paintover one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge 127 M & L for applying one coat of synthetic enamelled paintincluding preparation of old decoratedsteel surfaces of any description not otherwise described over 10 CM girth or width all as directed by the Engr in charge 128 M & L for applying white wash of 3 coats on ceiling incl preparation newly plastered surfaces as specified and directed. 129 Complete removal of existing treatment andapplying Two coat of white wash on ceiling incl preparation old plastered surfaces as specified and directed. 130 M & L for applying white wash of 3 coats on wallsincl preparation newly plastered surfaces as specified and directed. 131 Complete removal of existing treatment on wall andapplying Two coat of white wash incl preparation old plastered surfaces as specified and directed. 132 Material and labour for preparation of new plastered surfaces on walls and applying two coats of oil distemper over one coat of chalk whitening complete all as specified. 133 Complete removal of existing treatment on wall andapplying Two coat of Oil distemper (white or tinted) on old plastred surfaces incl preparatory to distempering on walls etc (Surface finished even and smooth) complete all as specified and as directed by Engineer-in-Charge. 134 Material and labour for preparation of new plastered surfaces on walls and applying two coats of cement base paintover one coat of cement primer complete all as specified. 135 Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out soft/ lose soilcomplete all as spd and directed. 136 Excavation in post holes each nexc 0.50 cum , getting out, returning filling in and ramming earth or broken rubble mixed with earth in layers not exceeding 25cm in soft/loose soilcomplete all as spd and directed. 137 M & L for PCC (1:2:4) typeB-2 (using 40mm graded crushed stone aggregates ) lean concrete as in foundation, filling and mass concrete of post complete all as specified . 138 M&L Broken stone or boulders as in hardcore of gauge n.exc 63mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered, rammed to a true surface etc complete all as specified and directed 139 M/L 100mm thick cement concrete 1:4:8, type D-2 using 40mm graded stone aggregatecomplete all as spd and directed. 140 M & L for 25mm thick Sand coushening under paver block complete all as specified and directed. 141 M&L machine pressed precast coloured concrete coloured interlocking paver blocksany shape and size confirming of IS 15658: 2006 of 60mm thick , M-35 laid and jointed with grey cement and pigment.complete all as spd and directed. 142 M & L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm gradedstone aggregate) cast in situ inkerbs or mud stops, rounded or chamfered on edges of paving blocks as directed including use and waste of form work.complete all as spd and directed. 143 S&F Steel work as in tubular section for Post, Purline etc including special shaped washer , angle cleat, holdfast, gussete plate etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240cut or notched forming holes, without any attachment including drilling, fitting, riveting and or welding or connecting with bolts and nuts (incl rivet or nut and bolts) providing and fitting angle cleats Gussete plates etc also for welding plumbing, truing up and fixing complete as directed by Engr-in-Charge. 144 M&L pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with J or L type or cranked hookbolts complete as directed by Engr-in-charge. 145 M & L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with J or L type or cranked hookbolts complete as directed by Engr-in-charge. 146 M & L for Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters,nosingtosteps includingembedinginconcrete and screwing etc. wind ties for roofincluding securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling,boltingor riveting, etc., and similar work conforming to Fe-290 Gde E-165complete all as spd and directed. 147 M&L for prepration of new steel surface of any description, over 10cm in width or girth,not otherwise described and apply two coat of synthetic enamelpaint over a coat of red oxide primer etc complete all as specified and directed. 148 M & L for prepration of new steel surface of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint and apply two coat of synthetic enamelpaint over a coat of red oxide primer etc. complete all as spd and directed. 149 Returning, filling in , including spreading, levelling , watering and well ramming in layers not exc 25 cm thick by using hard/dense soil as in low line area as directed by Engr-In-Charge . 150 Removing excavated soils n.exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point.complete all as spd and directed. 151 Taking down carefully aluminium / copper point wiring (light / fan / socket or power) complete including fitting such as switches, ceiling roses, socket, light fittings, regulators etc complete and making good disturbed surfaces of walls, floors 152 Taking down unserviceable Submain/Cableof any size as directed by Engineer-In-Charge. 153 Taking down main switch / DB as directed by Engineer-In-Charge. 154 M & L for sub main wiring with two single core PVC insulated and unsheathed cable 6 sqmm with multi stranded copper conductor , FRLS type cable drawn throughand including PVC concealed conduit of not less than 25mm in size complete with all accessories alongwith provn of 6 sqmm PVC insulated and unsheathed ,multi stranded copper conductor , FRLS type cable as earth wire.(Three runs of cable and one run of conduit shall be measured as one length) 155 M & L for concealed point wiring complete with 1.5 sqmm single core multistranded copper conductor FRLS, PVC insulated and unsheathed cable 650 /1100 volts grade drawn through & including PVC conduit ,medium grade with accessories like bends, tees, junction boxes etc fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS type , copper multistrandedcable as earth wire including sunken type pressed steel terminal boxes of thickness 1.6 mm thick and plastic laminated white / coloured top sheet cover 3.0 mm thick for: complete all as spd and directed. 156 One light / fan/bell pointcontrolled by one, one way switch. complete all as spd and directed. 157 One 3 pin socket out let 5 Amps on same board with other switches.complete all as spd and directed. 158 One 3 pin socket out let 5 Amps on the independent board.complete all as spd and directed. 159 Dittoall as per item No.5 about but with 2.5 sqmm multistranded copper multistranded conductor FRLS cable with 2.5 sqmm earth wire for one 6 pin socket outlet 15 amps on independent boardcomplete all as spd and directed. 160 S & F switch Piano 5 Amps, flush button type, SP, one way, 230 Volts, ACcomplete all as spd and directed. 161 S & F switch Piano 1 5 Amps, flush button type, SP, one way, 230 Volts, ACcomplete all as spd and directed. 162 S & Fsocket out let multipurpose 5 pin 5 Amps,230 Voltscomplete all as spd and directed. 163 S & Fsocket combination ,6 pin ,15 amps, flush type, multipurpose, 230 Vcomplete all as spd and directed. 164 Supply and fix bell push flash piano type 5 amps.complete all as spd and directed. 165 Supply and fix bell ding dong 230 Volts AC single pole.complete all as spd and directed. 166 M & L ceiling rose surface bakelite 65 x 50 mm three terminals complete all as specified. 167 Supply and fix DB,double door,SPN 8 way for MCB, 240 volt with 200 amps rated bus bar.complete all as spd and directed. 168 S & F MCB SPN40 to 63 Amps 240 voltscomplete all as spd and directed. 169 S & F MCB SP 6-32 Amps 240 voltscomplete all as spd and directed. 170 Supply and Fixingstepped socket type electronic fan regulator and connecting up complete all as directed by Engineer-In-Charge. 171 M & L Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.complete all as spd and directed. 172 S&F in replacement LED tube light fitting 20Wbox type including LED lamp 20 W with 2200 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixturesand connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed. 173 Supply & fixing in replacement LED street light fitting 35W including LED lamp pressure die cast aluminum IP66 with surge protection device of 10KV, IK7 LED6500K and connecting electrical to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed including bracket and fixing clamps etc.complete all as spd and directed. 174 Supply and fix LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size all as specified and directed. 175 Taking down existing Ceiling fan/Exhaust fancapacity/type carefully and refixing the same with gutties, nuts boltss if required complete all as specified and directed. 176 Taking down existing Geyser any capacity/type carefully and refixing the same with replacement of PVC connection/Steel connection and anchor fastenerpipe if required complete all as specified and directed. 177 Supply and laying GI Tube Med grade 50mm dia all as specified and directed. 178 Supply and fix MCCB 63 Amps 4 pole415 Volt,16 KA breaking capacity . complete all as spd and directed. 179 M&L for earthing complete with GI steel earth plate electrod 60x60cmx6.00mm thick bouried directly in ground /earth pit not less than 2.25m deep below the ground level with top edge of the plate not less than 1.5 m below the normal ground level connected to test point by using GI wire of dia 4 mm as earthing lead soldering/revated to earth plate at one end and connected DBby means of nut, bolts etc complete with PCC pit (1:3:6) type GI cover with handle funnel with watering pipe wire mess GI protection pipe for earthing lead all complete as specified and as per electric plate No.5 of SSR Part Icomplete all as spd and directed. 180 M& L for XPLE UG Cable of size 35 Sqmm 4 Core all as specified and directed. 181 M & L river sand in trenches as cable cushioning 8 cm below the cables and 15cm above the cable which is to be punned down to 10m all as specified and directed.only punned thickness will be measured.complete all as spd and directed. 182 Supply and lay burnt bricks sub class B standard size laid across the cable in trenches as protection to the cable all as specified and directed.

BRR:7513946 Supplying And Installation Electrical Materials And Appliances At A.P.J. Abudul Kalam Meeting Room (P-2) At Bolpur Municipality Office Building.- Supply of Powder coated Industrial regular 1×1 Batten for 28 W LED 6000 K mounted panel Light with integral LED driver. [Model - PLUTOSURFACE1X1PLS15WLED840S] [Make - Havells] 2 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works(a) 4 Module[PWD Schedule Page No-E-17, Iteam No-1] 3 (f) 2 Row 18 Module[PWD Schedule Page No-E-17, Iteam No-1] 4 Supply 1200 mm 3 blade celling fan [Make-Crompton/Havells] 5 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC[PWD Schedule Page No-E-9, Iteam No-1(s)] 6 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC[PWD Schedule Page No-E-9, Iteam No-1(v)] 7 ADD 18 % GST 8 ADD 1% CESS

BRR:7513943 Supplying And Installation Electrical Materials And Appliances At A.P.J. Abudul Kalam Meeting Room (P-3) At Bolpur Municipality Office Building.- 1 Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI U hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles19 mm dia 3 mm thick polythene pipe with 1x14 SWG GIearth continuity wire[PWD Schedule Page No-E-3, Iteam No-6(b)] 2 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.[PWD Schedule Page No-C-3, Iteam No-21(a)] 3 Supply of Powder coated Industrial regular LED FLEXI STRIP for 28 W LED 6000 K mounted panel Light with integral LED driver. [Model - FLEXISTRIP5MIP2024V/2ALED830MOD V1 ] [Make - Havells] 4 Supplying of 1.1 KV. Grade PVC insulated Conductorof following cables (make: Polycab/ Gloster/Havells/): 10 sqmm 4 core alluminium[Electrical-Mechanical Works (Volume-1);Iteam No-c)/3] 5 Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [Page No-F-2;Iteam No-1(a)] 6 ADD 18 % GST 7 ADD 1% CESS

BRR:7513942 Supplying And Installation Electrical Materials And Appliances At C-I-C Guest Room And With Attached Toilet At Bolpur Municipality Office Building.- 1 Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish[light pts+exhaust fan pts+outdoor light pts+ceiling fan pts+tube light pts] [PWD Schedule Page No-E-14;2(a)]Average run 5 mtr 2 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection6-32A SP MCB[PWD Schedule Page No-D-6;Iteam No-7] 3 Supply of Powder coated Industrial regular Batten for 10 W LED 6000 K mounted panel Light with integral LED driver. [Model - INTEGRANEODLR10WLED830S] [Make - Havells] 4 Fixing only single/twin fluroscent light fitting complete with all accessories directly on wall/ceiling by screws etc[PWD Schedule Page No-C-2;Iteam No-14a] 5 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works(a) 4 Module[PWD Schedule Page No-E-17, Iteam No-1] 6 (f) 2 Row 18 Module[PWD Schedule Page No-E-17, Iteam No-1] 7 Supply 1200 mm 3 blade celling fan [Make-Crompton/Havells] 8 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC[PWD Schedule Page No-E-9, Iteam No-1(s)] 9 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC[PWD Schedule Page No-E-9, Iteam No-1(v)] 10 Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI U hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles19 mm dia 3 mm thick polythene pipe with 1x14 SWG GIearth continuity wire[PWD Schedule Page No-E-3, Iteam No-6(b)] 11 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.[PWD Schedule Page No-C-3, Iteam No-21(a)] 12 Supply, fixing 43 (108cm) UHD (4K) LED TV[Make-Sony UHD (43W880K)] 13 Supply of9 (225mm)SWEEP. TRANS AIR -[Make-Crompton/Havells] 14 Supplying of 1.1 KV. Grade PVC insulated Conductorof following cables (make: Polycab/ Gloster/Havells/): 10 sqmm 4 core alluminium[Electrical-Mechanical Works (Volume-1);Iteam No-c)/3] 15 Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed [Page No-F-2;Iteam No-1(a)] 16 Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: (a) 22.5 cm ( 9 ) [Page No-C-4;Iteam No-28(b)] 17 Fixing only louver shutter/cowl on wall with necy. bolts & nuts (6 mm dia x 62 mm long) (a) For 322.5 cm(9) Exhaust fan [PWD Schedule Page No-C-4;Iteam No-28(b)] 18 S/F 240V 25A Modular type starter (brand approved by EIC)with 25 A. Modular switch DP MCB (C-Curve)and 4 Module G.I. Moduar type switch board with 4 Module Top Cover Plate flushed in wall incl. S/F switch board and Cover Plate and making necy. Connections with PVC Copper wire and earth connectivity wire etc. as per schedule [for AC][PWD Schedule Page No-E-19, Item No-17] (Please follow in details) 19 Supply, fixing & complete installation along with out door wall mounted stand of split type Air-conditioner of 2 ton 3 star BEE cooling capacity suitable indoor and out door unit of make Bluestar (IB324VNU) Inverter Split AC. 20 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[PWD sch P-E/18 , I - 9(B] 21 ADD 18 % GST 22 ADD 1% CESS

BRR:7513941 Supplying & Installation electrical materials and appliances at Executive Officer room at Bolpur Municipality Office Building.- 1 Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit FR (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish[light pts+exhaust fan pts+outdoor light pts+ceiling fan pts+tube light pts][PWD Schedule Page No-E-14;2(a)]Average run 5 mtr 2 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection6-32A SP MCB[PWD Schedule Page No-D-6;Iteam No-7] 3 Supply of Powder coated Industrial regular Batten for 10 W LED 6000 K mounted panel Light with integral LED driver. [Model - INTEGRANEODLR10WLED830S] [Make - Havells] 4 Fixing only single/twin fluroscent light fitting complete with all accessories directly on wall/ceiling by screws etc[PWD Schedule Page No-C-2;Iteam No-14a] 5 Supplying & Fixing GI Modular Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works(a) 4 Module[PWD Schedule Page No-E-17, Iteam No-1] 6 (f) 2 Row 18 Module[PWD Schedule Page No-E-17, Iteam No-1] 7 Supply 1200 mm 3 blade celling fan [Make-Crompton/Havells] 8 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2x36/0.3 (2.5 sqmm) + 1x22/0.3 (1.5 sqmm) as ECC[PWD Schedule Page No-E-9, Iteam No-1(s)] 9 Supplying and Drawing 1.1 KV single core stranded FR PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC[PWD Schedule Page No-E-9, Iteam No-1(v)] 10 Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI U hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles19 mm dia 3 mm thick polythene pipe with 1x14 SWG GIearth continuity wire[PWD Schedule Page No-E-3, Iteam No-6(b)] 11 Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.[PWD Schedule Page No-C-3, Iteam No-21(a)] 12 S/F 240V 25A Modular type starter (brand approved by EIC)with 25 A. Modular switch DP MCB (C-Curve)and 4 Module G.I. Moduar type switch board with 4 Module Top Cover Plate flushed in wall incl. S/F switch board and Cover Plate and making necy. Connections with PVC Copper wire and earth connectivity wire etc. as per schedule [for AC][PWD Schedule Page No-E-19, Item No-17] (Please follow in details) 13 Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.[PWD sch P-E/18 , I - 9(B] 14 ADD 18 % GST 15 ADD 1% CESS

BRR:7510896 Annual Tender For Year 2025-26 Of Supply, Erecting , Commissioning And Maintenance Of Electrical Material And Appliance In Municipal Councils Office,Hospital, Schools,Garden, Buildings And Other Places As Per Requirement.- 1 Tube Rod 4 36/40 Watt (Bajaj) 2 Electronic chock 40 watt 3 Pliar (taparia) 4 Tester (taparia) 5 Wire Cutter 6 Screw driver standard with + and - Head 7 Handgloves (electrical) 8 Brass point kit-kat 16 amp (Anchor) 9 Brass point kit-kat 32 amp (Anchor) 10 Brass point kit-kat 63 amp (Anchor) 11 Brass point kit-kat 100 amp(Anchor) 12 Isolator 40A 13 Isolator 63A 14 Power plug with switch 16 amp, 5 pin socket with indicator 15 Electronic fan regulator (Anchor) 16 Electric school bell 10 17 Electric office bell ding-dong 18 Cordless electronic bell (ISI Mark) 19 Bell push lock type (ISI Mark) 20 Lamps and Lights 21 LED lamp 3 watt 22 LED lamp 5 watt 23 LED lamp 7 watt 24 LED lamp 9 watt 25 LED lamp 12 watt 26 LED lamp 18 watt 27 LED lamp 23 watt 28 LED Concealed light 3W 29 LED Concealed light 5W 30 LED Concealed light 7W 31 LED Concealed light 10W 32 LED Concealed light 12W 33 LED Concealed light 14W 34 LED Concealed light 16W 35 LED Panel Light 36/40 watt 36 LED Batten light 20-22 W 37 Retrofit LED Tubelight 20-24 watt 38 Bulkhead LED LIght 10 Watt 39 LED Strip light 5m Length Max. 45 W IP20 class including Driver 40 LED Strip light 5m Length Max. 95 W IP20 class including Driver 41 PVC pipe heavy duty 3/4 1 42 PVC L-bow 3/4 1(cello, modi) 43 PVC T 3/4 1(cello, modi) 44 PVC bend 3/4 1 (cello, modi) 45 PVCsaddle /clip 20 to 25 mm 46 GI Saddle 25mm 47 Cableclip 6mm 48 Cableclip 10mm 49 Cableclip 16mm 50 Cableclip 20mm 51 Casing clip 52 PVC junction box one-way 3/4 1 (cello, modi) 53 PVC Junction box two-way 3/4 1 (cello, modi) 54 PVC Junction box three-way3/41(cello, modi) 55 PVC Junction box four-way 3/4 1 (cello,modi) 56 Casing-capping heavy duty 1/2 1 (cello,modi) 57 Casing-capping Capling 1/2 1(cello, modi) 58 Casing-capping T 1/2 1 (cello, modi) 59 Casing-capping L-bow 1/2 1(cello, modi) 60 Casing-capping Corner 1/2 1(cello, modi) 61 wooden board 12x15 62 PVC board4x4 (cello, modi) 63 PVC board 4x6(cello, modi) 64 PVC board 4x8(cello, modi) 65 PVC board 6x8(cello, modi) 66 PVC board 8x10(cello, modi) 67 PVC board 12x16 (cello, modi) 68 Modular Surface switchboard 2 module 69 Modular Surface switchboard 4 module 70 Modular Surface switchboard 6 module 71 Modular Surface switchboard8 module 72 Modular Surface switchboard 12 module 73 Modular Surface switchboard 18 module 74 Modular electronic ceiling fan regulator 75 Modular Switch 6A 76 Modular Switch 16A 77 Modular DP Switch 32 A 78 Modular Socket 6 A 79 Modular Socket 16 A 80 Modular single phase motor/AC starter 25A 81 Modular MCB 16 A 82 Modular MCB 25 A 83 wooden gitti 84 Screw 1 inch 85 Screw 1.5 inch 86 Screw 2 inch 87 Screw 3 inch 88 G.I. Earthing wire 89 G.I. Earthing plate 60×60×0.6 cm 90 Earthing Pipe 40 mm dia 91 nut-bolt set 92 Insulation tape 3/4 x 5 mtr. (ISI Mark) 93 Piano Switch 5 A 94 Piano Switch 16 A 95 pendant switch 96 5 pin Socket5 amp (cello,Anchor ) 97 ceilling rose (cello, modi) 98 Angal holder (cello, modi) 99 Button holder (Anchor) 100 2 pin Top 6A 101 3 pin Top 6A 102 3 pin Top 16A 103 Plastic Wall plug 6mm 104 automatic line Voltage stabilizer,for Air Conditioner of 1.5 TR 105 automatic line Voltage stabilizer,for Air Conditioner of 2 TR 106 Wires & Cables 107 PVCCu. wire multistand 1sq mm 108 PVCCu. wire multistand 1.5 sq mm 109 PVCCu. wire multistand2.5 sq mm 110 PVCCu. wire multistand 4 sq mm 111 PVCCu. wire multistand 6 sq mm 112 PVCCu. wire multistand 10 sq mm 113 PVCCu. wire multistand 16 sq mm 114 PVC copper 3 core 1.5 sq.mm cable 115 PVC copper 3 core 2.5 sq.mm cable 116 PVC copper 3 core 4 sq.mm cable 117 PVC copper 3 core 6 sq.mm cable 118 PVC copper 3 core 10 sq.mm cable 119 Service wire 4mm(ISI Mark) 120 Service wire 6mm (ISI Mark) 121 Service wire 10mm (ISI Mark) 122 Pvc Aurmod Allu. cable 2c, 4 sq.mm.(ISI Mark) 123 Pvc Aurmod Allu.cable 2c, 6 sq.mm. (ISI Mark) 124 Pvc Aurmod Allu.cable 2c, 10 sq.mm. (ISI Mark) 125 Pvc Aurmod Allu.cable 3c, 2.5 sq.mm. (ISI Mark) 126 Pvc Aurmod Allu.cable 3c, 4 sq.mm. (ISI Mark) 127 Pvc Aurmod Allu.cable 4c, 6 sq.mm. (ISI Mark) 128 Pvc Aurmod Allu.cable 4c, 10 sq.mm. (ISI Mark) 129 Pvc Aurmod Allu.cable 4c, 16 sq.mm. (ISI Mark) 130 DWC pipe 50 mm dia 131 G.I pipe A grade 25 mm (ISI Mark) 132 G.I pipe A grade 40 mm (ISI Mark) 133 G.I pipe A grade 50 mm (ISI Mark) 134 MCB ,RCBO & MCCB 135 SPMCB 10 Amp 136 SPMCB 16 Amp 137 SPMCB 25 Amp 138 SPMCB 32 Amp 139 SPMCB 40 Amp 140 SPMCB 63 Amp 141 DPMCB 10 Amp 142 DPMCB 16 Amp 143 DPMCB 20 Amp 144 DPMCB 32 Amp 145 DPMCB 40 Amp 146 DPMCB 63 Amp 147 TPMCB 32 Amp 148 TPMCB 40 Amp 149 TPMCB 63 Amp 150 FPMCB 40 Amp 151 FPMCB 63 Amp 152 2 Pole RCBO 40 Amp 153 2 Pole RCBO 63 Amp 154 4 Pole RCBO 40 Amp 155 4 Pole RCBO 63 Amp 156 4 Pole MCCB 100 Amp 157 4 Pole MCCB 125 Amp 158 Fitting and Point wiring 159 Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessoriesas per specification No: WG-PW/SW 160 Point wiring for light/bell/exhaust fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW 161 PVC pipe fitting (single point) 162 Casing-capping fitting 163 MCB fitting 164 Power plug 15 amp fitting 165 Earthing plate complete fitting 166 Tube light complete fitting. 167 Celling/Wall fan set fitting 168 Fan regulator fitting with wiring 169 Elecrical bell fitting 170 Fans ,Cooler & UPS 171 Celling fan 1200 mm. 172 BLDC Celling fan 28Watt 1200 mm. 173 Celling fan 1400 mm. 174 Anchor Bolt for ceiling fan 175 Wall fan 400 mm(crompton, bajaj ) 176 Exhuast fan 300 mm(crompton, bajaj ) 177 Exhuast fan 380 mm(crompton, bajaj ) 178 Fresh air fan 225 mm(crompton, bajaj ) 179 Desert cooler 5 feet 180 Desert cooler 4 feet 181 Desert cooler 3 feet 182 Iron work with fabriccation in Kg. 183 Iron sheet Fabrication work of 1.6 mm in kg. 184 Extention Box strip 4 pin socket (ISI Mark) 185 UPS 230V. AC 1/P, 800VA/360 watt capacity (ISI Mark) 186 STREET LIGHT BOX 187 Terminal box 1.6 mm (16 guage) CRCA sheet of size 200 x150x150 mm. (ISI Mark) 188 Terminal box 1.6 mm (16 guage) CRCA sheet of size 200 x150x150 mm. (ISI Mark) 189 Terminal box cast iron of size 200x150 x150 mm. 190 Terminal box cast iron of size 200x150 x150 mm. 191 FRP box of size 250x250x100 mm (ISI Mark) 192 FRP box of size 150x125x100 mm (ISI Mark) 193 Automatic street Panel 6 kw capacity with 24 Hours Timer 194 Iron flat 1 1/4x 6 mm clamp with nut-bolt. For street light 195 Round pole clamp. 196 cement (r.c.c) pole clamp. 197 Rail Pole Clamp 198 GI bracket 40 mm dia 199 Digital timer 24 Hours contact rating up to 16A 200 12 Volt 10Amp Power Supply 201 12 Volt 20Amp Power Supply 202 DIN Rail Patti 203 4 Pole contactor 9 Amp 204 4 Pole contactor 18 Amp 205 4 Pole contactor 32 Amp 206 4 Pole contactor 40 Amp 207 CABLE LUGS 208 Copper lugs up 16 sq mm (ISI Mark) 209 Copper lugs up 25 sq mm (ISI Mark) 210 Aluminium Lugs up to 16 sq mm (ISI Mark) 211 Aluminium Lugs up to 25 sq mm (ISI Mark) 212 LED STREET LIGHT and Flood light FITTING 213 Outdoor LED street fitting 24 to 36 watt 214 Outdoor LED street fitting 36 to 48 watt 215 Outdoor LED street fitting 48 to 60 watt 216 Outdoor CFL street fitting 36 watt 217 Flood light fitting 30 W 218 Flood light fitting 50 W 219 Flood light fitting 100 W 220 Flood light fitting 150 W 221 BATTERY 222 dry cell 1.5 v 223 9 volt battery 224 12volt 7 Ah SMF battery 225 SMF battery12V/80AH. 226 SMF battery 12V/110AH. 227 Tubular Inverter battery 12V/100Ah 228 Tubular Inverter battery 12V/150Ah 229 DISTRIBUTION BOARD 230 Metal MCB Box 2 way 231 Metal MCB Box 4 way 232 250 V, 4 way 16 amp. (ISI Mark) 233 250 V, 8 way 16 amp. (ISI Mark) 234 250 v, 16 way 16 amp. (ISI Mark) 235 415/500 V, 24 way 16 amp. (ISI Mark) 236 415/500 V, 32 way 32 amp. (ISI Mark) 237 CABLE 238 PART-2 :- MAINTENANCE OF ELECTRICAL APPLIANCE. 239 A) Celling Fan/Wall Fan/Exuast Fan, Maintenance. 240 Rewinding 1200 & 1400 mm Fan. 241 Bearing Replacement 242 Bush Replacement 243 condenser.2.5 um 244 1200mm Ceiling fan blade 245 Wall fan new blade 246 Exuast fan new blade 247 B) Cooler Maintenance. 248 Motor Rewinding 249 Bearing Replacement 250 Bush Replacement 251 condenser. 252 stud rod 253 Water Tank For3 cooler 254 Water Tank For4 cooler 255 Water Tank For5 cooler 256 khash wooden plate with fitting 257 woodwool with fitting 258 regulator replacement 259 Pvc 3 core 1.5 mm flexible wire 260 Air diverter 261 Semi Exhaust new motor 900 to 1400 rpm 262 Full Exhaust new motor 900 to 1400 rpm 263 Summersible Pump for 3 cooler 264 Summersible Pump for 4 cooler 265 Summersible Pump for 5 cooler 266 Diesel Generator Maintenance Rate(15 KVA) 267 Armature winding 268 Starter Motor 269 flywheel gear ring 270 oil filter 271 Diesel filter 272 A.V.R 273 Service Charge 274 Battery charger 275 Hour meter 276 Battery 12v/120Ah 277 Air Conditioner Maintanace Rate. (for 1.5 TR) 278 New Fan Motor 279 Fan Motor rewinding 280 Thermostate 281 relay 282 Capacitor 283 New Blower motor 284 Compressor 285 Gas Charging 286 P.C.B. Kit 287 Service Charge

BRR:7510756 Tender For Addn/Altn To Building No T-77 At 24 Ed Af Station Manauri; 1 Excavating soft/loose soil in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan andexc 1.5 m in depth and getting out complete all as specified and directed by Engineer -In-Charge. 2 Returning, filling of soft/loose soil in, including spreading, levelling,watering and well ramming in layers not exc 25 cm.complete all as specified and directed by Engineer -In-Charge. 3 Removing excavated material (soils) exc. 250 m but nexc. 500 m and depositing where directed complete all as specified. 4 Removing excavated material (soils)n exc. 50 m and depositing where directed complete all as specified. 5 Removing excavated material (soils) exc. 50 m but n exc. 250m and depositing where directed complete all as specified. 6 M&L for Cement concrete type C2 (1:3:6 ) using 40 mm grade stone gradedaggregate in foundations, filling and mass concrete complete all as specified and directed. 7 Demolition of brickwork built in cement mortar including all quoins, archers, pillars,etc excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed. 8 M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in in cement mortar (1:6) complete all as specified. 9 M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete finished fair even surfaces.complete all as specified and directed. 10 M&L for rendering 15 mm thick in cement mortar (1:4) with mixed water proofing compound (liquid) other than fairfaces of brick or concrete surface finished even and smooth without using extra cement as complete all as specified & directed.Note:- Water proofing compound (liquid) seprately shall be measured paid saprately. 11 Supply only liquid water proofing compound @ 200 ml per bag of cement as complete all as specified. 12 Dismantling of Stone slabs in roofs, floors, chajjas, landings, etc., any thickness, jointed in any mortar complete all as specified and directed by Engg-in -charge. 13 Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Eng-in-Charge.. 14 M & L for brushing neat cement slurry with 3.0kg of cement per sq. metrecomplete all as specified and directed by Eng-in-Charge.. 15 M & L for 75mm thick Cement concrete type C-1, 1:3:6 (20mm graded stone aggregate) in Plinth Protection etc. complete all as specified and directed by Eng-in-Charge. 16 M&L for hardcore of broken stone or boulders gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed. 17 M&L for Cement concrete type D2 (1:4:8 ) using 40 mmgraded stone aggregate in foundations, filling and mass concrete complete all as specified and directed. 18 M&L for 50mm ThickCement concrete type A-1, (1:1.5:3)(20mm graded stone aggregate) finished even and fair complete all as specified and directed. 19 M&L for Granolithic concrete 1:1:2 floor topping 30mm thick laid over cement concrete sub floors etc. and finishedto an even and fair surface complete all as specified and directed. 20 M&L for 30 mm thick wearproof topping of metallic floor (40kg of cement ,10 kg hardener and 0.034cum of granite chips for per sqm area of floor)as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smoothcomplete all as specified and directed.Note:- Metalic hardner shall be measured and paid separately as supply only. 21 M & L for Treating cement concrete or granolithic concrete surfaces with three dressings of sodium silicate solution complete all as specified and directed by Engineer-In-Charge. 22 Supply only metallic floor hardener complete all as specified and directed. 23 M&L for forming 12 mm thick expansion joint filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound grade A for 110 mm thick concrete floor complete all as specified and directed. 24 M &L for cement concrete using 20mm grade stone aggregateas , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, type B1 (1:2:4) including necessary form work complete all as specified and directed. 25 M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in rcc band and rcc precast slab complete all as specified. 26 All as per item No 25 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified. 27 M&L for PCC 1:2:4 Type B1 using 20 mm graded stone aggregate as in coping/holdfastcomplete all as specified and directed. 28 Use and waste formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc.for rough finished surface of concrete also splays between floors and beams, etc.complete all as specified and directed. 29 M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over & including 15 mm thick screed bed in cement mortar (1:4) complete all as specified and directed. 30 S&F for mild steel framed work such as grills , gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. 31 S&F for anodised sliding Aluminium door shutter including anodised Aluminium frame aluminium section weighing 0.55 kg /per meterand including necessary joining cleats , glazing cleats , rubber Neoprene packing handles , anodized Al. snaps beading , screws including 5.00 mm thick glass panes, floor door spring necessary tower bolt, lock with locking arrangement complete all as specified and directed. 32 S & F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer in charge. 33 S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m includingnecessary joining cleats, glazing clips, rubber packing, anodised aluminiumsnap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed . 34 S&F aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staplescomplete all as specified and directed . 35 S&F sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane of 5.5 mm thick complete all as specified and directed . . 36 S&F aluminium composite panel overall 3mm thick panel, aluminium sheet thickness 0.5mm minimum width 1.22 metre, minimum length 2.44 metre weight 4.5 Kg/Sqm external faces coil coated with PVDF and internal face coil coated polyster for cladding wall, column, beams and ceiling etc fixed with and including to frame work as per manufacturers instructionscomplete as specified and directed. Note : Colour of ACP shall be approved by AGE(I). 37 Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings valley guttercomplete all as specified and directed 38 Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and ridgescomplete all as specified and directed 39 Dismantling structural steel work including doors, gates but excluding framed truss etc.complete all as specified and directed 40 S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing of Fe 410 -W (GdeE- 250) quality A complete all as specified and directed 41 Dismantling expanded metal, weight not exceeding 4.0 kg/Sqm any thickness or mesh, fixed with steel or wood fillets, if any complete all as specified & directed. 42 S&F for expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members complete all as specified and directed . 43 S&F Pre-painted galvalume sheet aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge or similar work fixed with self tapping screws complete all asspecified and directed. 44 S & F 12 mm thick gypsum plaster board flame proof conforming to IS-2095 1982 to fix as suspended celling with on step and including frame consisting perimeter powder coated GI sheet channelI 20X27X30.5 mm intermediate channel 45 (WEB) X 1. 5 ( flange ) X 0.9 mm @ 1.22 M C/C with ceiling angle 2 5 X10X0.5 MM fixed to soffit with GI cleat and steel expansion fastner , celing section 51.5 ( Knurled web X 26 ( flange) with lips of 10.5 mm X 0.5mm @ 610 mm C/C nec clip , screw , nylon sleeves etc complete and apply two coats of oil bound distemper over a coat of putty on celling over preparation surface complete all as specified and directed. 45 Demolition and breaking up drain pipes of 150 mm dia (Salt glazed ware, AC ,PVC orreinforced concrete) set in cement mortar complete all as specified and directed . 46 S & F 150mm PVC (SWR) pipes single socketed in any length laid in trenches or in floor & walls with MS clamps etc complete all as specified and directed 47 S & FPVC (SWR) bends any radius 150mm dia complete all as specified and directed. 48 M & L for preparation of old steel surface exceeding 10 cm width or girth and apply two coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. 49 M&L for applying two coats of syntheticenamel over a coat of redoxide primer and prepartion of on new steel or iron surfaces of any description, over 10cm in width or girth not otherwise described complete all as specified. 50 Taking down steel window frame with shutters (without taking off shutters from the frames) not exc. 150 sqm complete all as specified and directed.. 51 M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces incl. preparation of new surfaces.as percomplete all as specified and directed.. 52 M & L for mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. compete all as specified and directed by E-in-Charge. (Fe- 410W Grade-E-250 quality A). 53 M&L fro distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturers Specification. Two or more coats on new workincl. preparation of new surfaces.as percomplete all as specified and directed.. 54 M& L for 3 mm thick wall care putty on plaster surfacecomplete all as specified and directed. 55 M&L for 60 mm thick PUF roof sheet manufactured in computerised plant and come with pre-painted Galvalume steel sheet and the density of Poly urethane foam sandwiched between two fascias ( thickness of top fasciasGalvalume steel sheet is 0.5 mmand thickness of bottom fasciasGalvalume steel sheet is 0.4 mm) is 40 + 2 kg/cum and featured with weather proof , flame retardation with self extinguishing property , environment friendly , resistant to corrosion , termites and fungus. includingfixing with suitable screws etc. and as per manufacturers instructioncomplete all as specified and directed... 56 M&L for 100 mm thick PUF wall panel manufactured in computerised plant and come with pre-painted Galvalume steel sheet having 320 MPa for Gr80 and the density of Poly urethane foam sandwiched between two fascias of Galvalume steel sheet0.5 mm thick is 40 + 2 kg/cum, and featured with weather proof , flame retardation with self extinguishing property , environment friendly , resistant to corrosion , termites and fungus. including with fixing with u channel with dash fastener of size (M6 x 65 mm) ,L-angle (50x50x0.6/1.2mm),100 mm with plain strip,pop rivet and self drilling screw of size 12-14 x 140mm etc. and as per manufacturers instructioncomplete all as specified and directed. 57 Providing precast cement concrete type B-1 (1:2:4) using 20 mm graded stone aggregate set in 1:4 cement mortar in but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces,complete all as specified and directed.. 58 M&L for treating the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface areacomplete all as specified and directed.. 59 M&L for treating the backfill in contact with foundation at the rate of 7.5 litres ofemulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified & as directed. 60 M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & as directed. 61 M&L for Treating the soil under plinth protection earth at therate of 5 litres of emulsion per square metre of surfacecomplete all as specified and directed.. 62 M&L for Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, cmplete all as specified and directed.. 63 M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate,asin surface channels and drains filling & mass concrete etc complete all as specified and directed. 64 M&L for brick work with sub class B bricks(old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1 : 4 and external face of brick work pointed flush in the same mortar as the work proceeds, complete as specified and directed. 65 M&L for PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses, acing courses, parapets and railings upto 60 cm in height, copings,benching, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles and throating,including necessary form workcomplete all as specified and directed.. 66 M&L for rendering 15 mm thick in cement mortar 1:4 with WPC/water proofing liquid on fair faces of brick or concretesurfaces finished even and fair complete all as specified and as directed.Note WPC/liquid shall be measured & paid seprately. Complete all as specified and directed.. 67 M&L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement,including forms, moulds, mi- tred/stopped ends etc.complete all as specified & as directed 68 Add or deduct for each 25 mm girth or part thereof over or under 30cm inner girth in cement concrete, using ex tra cement,including forms, moulds, mi- tred/stopped ends etc.complete all as specified & as directed. 69 450mm dia and 6.0m long Hume pipe culvert-01 Nos 70 Excavating soft/loose soil in trenches, n exc 1.5 m wide andexc 1.5 m in depth but not exc. 3 mtr depthfor foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc.nexc 10 sq m on planand getting out complete all as specified & as directed.. 71 M&L for RCC Hume pipe 450mm bore class NP-2 laid and jointed complete with collars including for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified. 72 M&L for preparing new surface and applying two coats of cement based paint over a coat of primer complete all as specified & as directed. 73 Surface excavation in soft / loose soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting outcomplete as specified and directed. 74 Removing excavated (soil) material exc. 50 m andupto a total distance of 250 m. of soil,complete as specified and directed. 75 M&L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate,including necessary formwork and finishing the surface of concrete,even & rough to receive the topping layer complete all as specified and directed. 76 M&L for 150 mm thick cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using400 kg of cement per cubic metre, including necessary use & wasteof formwork for laying pavement concrete/ hardstanding in bays between joints & contraction ,expansion joints or between the two contraction jointscomplete all as specified and directed. 77 M & L for finishing surface of concrete roads , by brooming, complete all as specified and directed. 78 M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ of thickness of concrete slab in 150 mm,complete all as specified and directed. 79 Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade A ,complete all as specified and directed. 80 M & L for Earthing complete with galvanised steel earth electrode plate of size 600x600x6.0 mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron strip of size 32 x 6 mm as earth lead up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with expanded metal(weight not less than 4 kg/sqm), and frame of angle iron 25x25x6mm with lugs 02 nos with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel and strip mesh and light grade GI earth wire protection pipe 40mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete including taking down of old existing one all as specified anddirected by Engr-in-charge.Note: (i) The unit rate includes GI pipe up to 7.5m for protection of earth lead andany additional lengthshall be measured separately .(ii) The unit rate includesmain earthing lead/strip from earth electrode to test point up to 7.5 meter and any additon length shall be measured and paid separately (iii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. 81 M & L for Air termination single pointed aluminium rod 12 mm dia and 300 mm long completeincluding taking down old unsv all as specified and directed by Engr-in- Charge. 82 M &L for test point terminal block made of gun metal or phosphorus bronze 75x75x25mm , drilled and screwed including 3 nos , 8mm dia, 25mm long hex head screw complete including taking down old unsv complete all as specified and directed 83 M&L for aluminium strip 25 x3.15mm with saddles and fixing screws etc for roof conductors and down conductors above ground for lightening conductor complete with provision for fixing on epoxy insulatorsincluding taking down old unsv complete all as specified and directed. 84 Supply & Fixing ofGI pipe, light grade 15 mm dia bore for installation of air termination rod including all fixing arrangements to walls and ceiling or laidcomplete all as specified and directed 85 Supply and fixing of Galvanised iron strip 32 x 6mm buried in groundor fixed to poles or any other indicated situation for loop earthing as ring main conductor complete including taking down old unsv acomplete all as specified and directed 86 Material and labour for precast cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate for support block of GI pipes and air termination rod complete all as specified and directed. 87 S & F GI pipe light grade 50 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole complete all as specified and as directed. 88 Supply and Fix epoxy insulator duly colouredwith necessary fixing arrangement on wall and roof for fixing of down conductor complete all as specified and directed 89 M&L for mild steel Cross arms bracings, support, clamps and back plates fabricated from structural steel section including nuts, bolts, washers etc, welding, bending cold or hot, drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminum paint complete all as specified and directed. 90 S & F plug type bib taps, cast iron, screwed for iron pipe and fixed for 15mm dia pipe complete including taking down old unsv complete all as specified and directed 91 Labour only for cutting to plinth protection/hard standing/road etc in 30 cm depth and 45 cm width to ensure laying/crossing of GI strip 32x6mm and repair to existing damaged/disturbed surface if any completeall as specified and directed by Engr-in- Charge. Note: The quoted rate shall include the cost of required material for repair to existing disturbed surface 92 Supply,installation,testing and commissioning of5-in-1 coolingsplit Air Conditioner of capacity 1.5 TR (smart cooling with energy saving) ,complete with HD Filter with Anti Virus Protection,Anti Allergy Filter, duly fitted DUAL Inverter Compressor with Varied Speed Dual Rotary Motor ,ADC Sensor ,Ocean Black Protection applied on Copper tubes of both Indoor & Outdoor unit , Refrigerant 410A/R32,4-way airswing operation,over load prtection,ISO – 9001 OEM Certification, suitable for operation on 220-240 volts single phase 50Hz Ac supply, comprising of following accessories with technical specification as under: 93 (a) Cooling Capacity Range (W) : 1100 to 7000 94 (b ) Power Input Heating/ Cooling : 1300W / 1270W 95 (c) ISEER Value : 3.2(Minimum) 96 (d )Star Rating :5 Star(Minimum) 97 (e) Noise Level (Indoor):Not more than 32db 98 (f) Air flow (Heating/Cooling) : 572 CFM /526 CFM 99 (g) Heating & Cooling Function Operation :-10°C to 54°C 100 (h) Air Throw : 16.0m (minimum) 101 (j) Type of condenser / evaporator : 100% Copper coil. (Aluminium coil / alloy shall not be accepted) 102 (l) Refrigerantcopper piping Minimum 0.8 mm wall thickness forsuction and discharge connections the indoor and outdoor units of suitable sizes complete with Nitrile Rubber insulation sleeves with preclad Aluminium & joints rapped with Aluminium tapesafter making of flares and joining with suitable size of flare nuts and saddling to the walls symmetrically as per common engineering practice. 103 (m) Providing of electric connection between outdoor and indoor units with suitable size of electric cables provided by the manufacturer along with the units 104 (n) Machine Control : With Battery Operated Remote Controller having LED / LCDdisplay complete with suitable size and capacity of batteries(cells). 105 (o) Features :AC shall be provided with atleast with certain features such as Sleep mode, turbo, swing, LCD / LED remote, lock, timer and temperature display. 106 (p) Drilling of suitable size of hole into wall alongwith 50mm PVC conduit (length equal to depth of hole) for passing of copper tubing (suction and discharge).Provisionand connecting wires flexible drain pipe of suitable dia of length as directed by Engr-in-Charge. 107 Note:(i)Connecting copper pipe (Minimum 6m length) ,Mounting bracket for indoor unit and Good quality PVC drain pipe of 25 mm dia included in the cost of item. 108 Supply and fix outdoor unit mounting brackets Factory made heavy duty floor anchored madeout of MS sheet bent to shape duly slotted for adjustment, powder coated GI/ aluminium stand for fixing Outdoor Condensing Units on the roof (or on the wall as required) of the room with serratedcomplete with s/sdash/hole fasteners of adequate length for fixing the bracket to wall for mounting of OutDoor unit complete all as specified and directed (Set of Two) 109 Supply and installation ofwater cooler Electric driven (single phase),having approx storage Capacity of 80 litres and nominal cooling capacity of 40 Litres per hour, with 02nos faucets,food grade stainless steel body and stainless steel tank,Refrigerant R134a,over load protection,suitable for 230V AC, 50Hz with stabilizer free operation.complete all as specified and directed by Engr-In-Charge. 110 M & L for AC point wiring using PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper with 4.0 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded coppercable confirming to IS:694(2010) using approved colour code for phase and neutralas per IS code drawn through ERW metallicrigid steel stove enamelled black medium dutyconduit ( Concealed) ISI Marked screwed and socket end ,corrosion resisitant, medium protection gradehaving wall thickness not less than 2.0 mm thick and minimum 25 mm external dia but shall be increased as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked)including conduit accessories like bends, tees, junction boxes etc fixed concealedwith all accessories including PVC insulated and unsheathed FRLSH 4.0 sqmm multi stranded copper conductor cable (green color) as continous earthlead wire connected to common earth and earth dollycomplete all as specified and directed by Engr-in-Charge. 111 Supply and fix sheet metal enclosure with socket plug top and MCBs single pole and neutral, enclosure with a two pin and earth plug andsocket complete with one single pole MCBof capacity20 Amps 240 volts (for Acs) 112 Supply, installation, testing and commissioning of LT panel outdoor type confirming of IS 8623 Part (one), CPRI approval, totally enclosed vermin proof suitably ventilated for 3 phase, 4 wire 415 Volts, 50Hz, AC supply, outer sheel shall be made out of 3.15mm thick CRCA sheet & MS angle section of suitable size for frame, factory fabricated, compartmentalized inner shell shall be made of out of 2.0 mm thick CRCA sheet for control gear. Front and back door operating with locking arrangement at front. Protection of enclosure IP 56 as per IS-2147 of 1962 with pre-treatment trhough 7 tank hot chemical process prior to powder coated with minimum 50-70 micron of approved colour. The bottom of outer shell contains a detachable plate having provision for entry of armoured cable of adequate size. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bones and skull to be provided. EPDM gasket of appropriate shape and size provided at all joints, door and covers including suitable size angle iron/flat iron frame work/support required with four legs 60cm long using angle iron 40x40x6mm, air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lugs, 4 x legs 40 cm grouted in PCC 1:2:4 and making good distrubed surface complete and comprising of the following:- 113 (A).INCOMER 114 (i) MCCB 350 Amp 4 pole, 36 KA, lcs =100% lcu,confirming to IS:13947(Part-3) 1993 andIS/IEC:60947(Part-2) with adjutsable magnetic and adjustable thermal release, adjustable overload 65% to100% and adjustable short circuit release from 3.5 to10 ln setting complete with phase seperator - 01 Nos 115 (ii) 1 No., 230V, AC operated integral type Digital multi function meter with RS-485 port for measuring Amps ,Voltage, Energy, kWH, kVAH, frequency,Maximum Demand & power factor etc with TOD facility conforming to specifications, latest IEC/ EMC and EMI standards/criterion, with necessary Circuit MCBs and suitable size summating CTs forincomer metering supporting SCADA/BMS connectivity. 116 (iii)1- set Red/Green ON/OFF indicating lamps (iv)1- set of three phase (red, yellow, blue) indicating lamps (v) Amber healthy trip indicating lamps(vi)3 nos. cast resin current transformers of suitable ratio withVA Burden &protection and Class 1.0 for measurement or CTs of suitable capacity as per panel designer. 117 (B).BUSBAR 118 (i) TPN + EAluminium electrolytic grade high conductivity bus bar of rating not less than the 1.5 times the rated capacity of incomer MCCB/ACBshall be insulated with colour coded heat shrinkable sleeves and mountedon suitable size F class insulators made of non hygroscopic , non combustable, track resistant, high strength FRP/MC/DMC material at an interval not more than 500mm through out the length of busbar along with extension and interconnected busbar.The extension link shall not be less than 300mm long supported on suitable size F class insulatorsfor termination of incoming and outgoing cables.All control wires shall be with 2.5sqmm FRLS multi strandedcopper conductor and shall be properly bunched , tied,ferruled for proper identification and crimped with adequate size of lugs. 119 (C). OUTGOING 120 (i) MCCB 125 Amp 4 pole, 25 KA, lcs =100% lcu,confirming to IS:13947(Part-3) 1993 andIS/IEC:60947(Part-2) with fixed magnetic and adjustable thermal release, adjustable overload 70-100% and fixed short ckt release suitable for 10 ln setting complete with phase seperator - 01 nos 121 (ii) MCCB 63 Amp 4 pole, 25 KA, lcs =100% lcu,confirming to IS:13947(Part-3) 1993 andIS/IEC:60947(Part-2) with fixed magnetic and adjustable thermal release, adjustable overload 70-100% and fixed short ckt release suitable for 10 ln setting complete with phase seperator - 02 nos 122 (iii) MCB SPN C series 16Amp/32Amp ,10KA -04 Nos (v) MCB TPN C series 32 Amp,10KA - 02 Nos (vi) Auto/Manual selector swicth -01 nos (vii) 1 sets (2 no.) of AC operated, 3.5 Digit, independent Digital Ammeter,Digital Volt meter with necessary Circuit MCBs and with suitable size CTs connections as required foreach outgoing feeders. 123 (D). PLATFORM 124 Platform for feeder pillar/LT Panel shall be of suitable size as directed,450mm height above ground level, the foundation shall be using PCC 1:2:4 type B1,15cm thick, brick (sub class B) work in CM 1:6, redering 1:6 on exposed surfaces and 100mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in padding on top and grouting legs of panel. 125 Supply,laying,jointing and testing, fixing to wall using clamps/pole/floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cableXLPE insulated,screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 70 sqmmconfirming to IS - 7098 Part-1 and its latest amendments complete all as specified and as directed by Engr-in-Charge. 126 Supply,laying,jointing and testing, fixing to wall using clamps/pole/floor or in air or passing through pipes/ducts/road/path/drain, laid in trenches, 1100 volts grade heavy duty electric cableXLPE insulated,screened ,PVC bedded, galvanised steel wire or wire armoured with electric power cable 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 sqmmconfirming to IS - 7098 Part-1 and its latest amendments complete all as specified and as directed by Engr-in-Charge. 127 S & F GI pipe light grade 80 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole complete all as specified and as directed. 128 S & F GI pipe light grade 40 mm dia as protection to cable along the pole / across road crossing/through culvert/passing through ceiling/walls with necessary clamps-02 nos(Flat iron 50x6mm) with ,nuts and bolts for fixing on pole complete all as specified and as directed.( For cable protection and GI earth lead) 129 Supply and fix CI cable route indicator 150mm dia , 5mm thick duly engraved with LT 1100 volts and bolted/welded to MS angle iron of size 40x 40x5 mm,70 cm long,50cm above ground level and 20 cm below ground, painted with 2 coats of synthetic enamel paint using approved colour over a coat of red oxide primer. The route indicator should begrouted in PCC using (1:2:4) type B-1 of size 150x100mm below the ground level completeall as specified and as directed by Engr-in-charge Note:- Route markers are to be fixed at a distance from each other all as directed. 130 Material and labour for boring of holes under road, pavement, runway, taxi track, hard standing by trenchless technolgy using ultrasound technique and necessary machine including HDPE pipe of 150 mm nominal dia PE 80 grade 0.4 Mpa working pressure for cable protection complete all as directed. Note: HDPE pipe shall be laid min 90 cm below the surface. complete all as specified and as directed. 131 M&L for sand cushioning to underground cable with dry sand locally available 8cm thick before laying of the cable and 15cm thick after laying and strectching the cable below the bricks/PCC cover, punning of sand using suitable T&P as per site condition, complete all as specified and as directed by Engr-in-Charge. Note : Punned thickness of sand to be consider for measurement purpose. 132 Supply and laying un-reinforced pre cast concrete cable coverconfirming to IS:5820 with minimum average breaking load capacity 200 kgs for unreinforced covers , class LV Type 1, flat, size 250mm x 150mm x 40mm complete all as specified and directed by Engr-in-Charge. 133 M&L for earth continuity conductor or main earthing lead/strip fixed to wall or buried in ground or drawn in conduit (pipe/fixed to poles) of any type or any other situation for loop earthing etc with GI Strip of size 32 x 6mm complete all as specified and as directed by Engr-in-charge. 134 Taking outLT cable any size from trenches/duct , stacking at site , checking by megger and shifting to other site for relaying complete all as specified and directed by Engr-in-Charge. 135 M & Lfor disconnectingincoming and out going cable connection of LT panel /Feeder Pillar Box of any sizeand taking out old unsv LT Panel and removal from sitecomplete all as specified and directed. 136 Taking down carefully (copper/aluminum) unsv point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point ,socket point or power point includingfixture and fitting such as switches , ceiling roses, pendants , regulators , sockets , light fitting etc. removing material to store for keeping in safe custody or for taking credit( credit for above items should be made asper conditions seperately) and making good the disturbed surfaces of wall/floor or ceiling to match with existing surfaceand finishing the surfaces with distemper/white washing/colour washing as per existingcomplete all as specified and directed. 137 Taking down carefully by unscrewing from main switch boards/cut out boxes/MCB DBs / complete sealing the cable end and making good disturbed surface by walls etc. 138 Taking down carefully by unscrewing from fitting and fixtures such as ceiling fittings,bulk head fittings, tube light fittings , street light , flood light/welglass/ high bayLED lights etc all as specified and directed. 139 M & L for Point wiring for one light point/fan point on wall on ceiling/roof/trusses with necessary fixing arrangementscontrolled by one single pole one way switch using 1.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded coppercable confirming to IS:694(2010) using approved colour code for phase and neutralas per IS code drawn through ERW metallicrigid steel stove enamelled black medium dutyconduit (Concealed) ISI Marked screwed and socket end ,corrosion resisitant, medium protection gradehaving wall thickness not less than 1.6 mm thickand minimum 20 mm external dia but shall be increased depending on No. of wires to be drawn as per actual site requirement in accordance with clause No 19.125 of SSR Part I including steel conduit accessories( ISI marked) like accessories like coupler lock,pipe hooks, nuts,girder clips or clamps bends, tees, junction boxes etcincluding PVC insulated and unsheathed FRLSH 1.5 sqmm multi stranded copper conductor cable (green color)as continous earthlead wire connected to common earth and earth dollycomplete all as specified and directed by Engr-in-Charge. 140 M & L for Point wiring for one power point on wallon ceiling/roof/trusses with necessary fixing arrangementscontrolled by one single pole one way switch using 2.5 sqmm PVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded coppercable confirming to IS:694(2010) using approved colour code for phase and neutralas per IS code drawn through ERW metallicrigid steel stove enamelled black medium dutyconduit ( Concealed) ISI Marked screwed and socket end ,corrosion resisitant, medium protection gradehaving wall thickness not less than 1.6 mm thickand minimum 20 mm external dia but shall be increased depending on No. of wires to be drawn as per actual site requirement in accordance with clause No 19.125 of SSR Part I ( ISI marked)including steel conduit accessories like bends, tees, junction boxes etc including PVC insulated and unsheathed FRLSH 2.5 sqmm multi stranded copper conductor cable (green color)as continous earthlead wire connected to common earth and earth dollycomplete all as specified and directed by Engr-in-Charge. 141 Note for item no.139 & 140 (a) Item cost includes cost of FRLSH copper cable,rigid stove enamelled conduit including accessories and cutting of wall for fixing of modular flush boxes.(b) Cutting chases for concealed wiring shall be measured and paid seperately.(c ) ERW steel conduit shall emboss the Standard Mark (ISI) and its licence number on the black pipes conforming to IS 1239 (Part-1) 142 M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting n . exc 10 cm girth complete all as specified and as directed. 143 M & L cutting chases, pinning in,making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps cills, sun shadows, sheves lintels etc and cutting chases for concealed water tubing or concealed wiring etc and making good cutting exc 10 cm girth but not exc 20 cm girth complete all a specified and as directed. 144 S & F flame proof switch rotary type direct entry single pole 16A 250V flame proof-Exd suitable for 240V AC, 50Hz supply,in aluminium die cast alloy in LM6 construction,IP 65 protection,confirming to IS-2148:2004 /IEC 60079-1 (2007) complete all as specified and as directed. 145 Supply and fixing Flame proof Ex d ,weather proof interlocked switch socket & plug combined, 16A, 250V, 2P+earth , in cast aluminium alloy LM6 construction suitable for 240V AC, 50Hz supply,,confirming to IS 2148:2004(IEC-60079-1/2007) complete all as specified and as directed 146 Supply and fixing LEDhigh bay luminaire light fitting80 Wattflame proof-Exd suitable for 240V AC, 50Hz supply, IP 65 protection with Grey Epoxy Powder Coated Pressure Die Cast LM6 Aluminium Alloy Housing with heat resistant toughened glass,Impact Resistance - IK08,LED driver (with built in voltage surge protection, short Circuit, & Over Voltage protections), holders, connector etc. including cradle to hang the fitting complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete all as specified and as directed 147 Supply & fixing of Flameproof Exd, weather proof MCB Distribution Box , TPN 4 way, 430V,50Hz,IP 66 weather proof protection with Grey Epoxy Powder Coated Pressure Die Cast LM6 Aluminium Alloy Housing ,suitable for flush mounting or surface mounting, including dissmantling existing one with its accessories, cutting chases to wall for fixing DB and making good the disturbed wall surface complete all as required at site and as directed comprising of following items as under :- 148 (a) Incomer - MCCB 4 Pole 63 A with Electronic Protection Unit Ics=100% Icu, Adjustable overload protection .4 to 1 x In, Protection against Short curcuit1.5 to 10 Ir, inbuilt instatneous protection,complete all as directed and specified Qty - 01 Nos 149 (b) Outgoing(i) MCB single pole 240 volts 10 Amps, C Curve, with rupturing capacity 10 KA ISI markedBiconnect lower terminals, IP 20 protected terminals, sliding shutters Qty -12 Nos (ii) MCB Tripple pole 415 volts 25 Amps, C Curve, with rupturing capacity 10 KA ISI marked Biconnect lower terminals, IP 20 protected terminals, sliding shuttersQty -01 Nos 150 S & F flame proof MCB DB SPN 8way with MCB 2P 32Amp -01 Nos (incomer) and MCB SP 10Amp -06 Nos(Outgoing) external protection metal clad suitable box with locking arrangements confirming to IP-66 with all necessary wiring connections and making good the distrubed surfaces to match with the existing complete all asspecifiedanddirectedby the Engineer-in-Charge 151 S & F flame proof / weather proof wall mountedair circulator fan 450mm sweep,0.25HP,1440RPM operating voltage range of 150V to 265Vwith a reputed driver, in aluminium die cast alloy LM6 construction of Gas Gr-IIA, IIB certified by CIMFR Dhanbad & CCOE (Pers) Nagpur, ISI marked including taking down old unsv fan and deposited to MES store yard complete all as directed. 152 Supply, install,commissioning and testing of commercial Air curtain unit of size 46 x 78 for prevention of dust and conditioned air losses, single phase, 220 V, 50HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS - CRC 18 gauge square perforated suction grills, Aluminium alloy fans and singlephase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5m/sec air velocity at floor level for door opening as specified. 153 M&Lfor Sub main wiring Using four single corePVC insulated and unsheathed fire retardant low smoke and halogen(FR-LSH) copper conductor single core multi stranded coppercable 6.0 sqmm( Phase and neutral) and two single core 6.0 sqmm copper conductor PVC insulatedFRLSHcable as continuous earth wire cable confirming to IS:694(2010) using approved colour code for phase and neutralas per IS code drawn through 32mm nominal outer diaERW metallicrigid steel stove enamelled black medium dutyconduit ( Concealed) ISI Marked screwed and socket end ,corrosion resisitant, medium protection grade inaccordance with IS:9537 (Part 2) having wall thickness not less than 1.6 mm thickand external dia as underbut shall be increased as per actual site requirement including conduit accessories( ISI marked) like coupler lock,pipe hooks, nuts,girder clips or clamps bends, tees, junction boxes etc fixedwith all accessoriescomplete all asspecified and as directed by Engr-in-charge. Note :4 runs of 6.0 sqmm copper cable & 2 run of 6.0sqmm copper cable in and including 32mm rigid steel stove enamelled conduit shall be measured as one unit 154 Supply & fix flameproof / weather proof 4 way junction box 2.5 sq mm of 120 mm diacomplete all as specified & as directed by Engineer-in-charge. 155 Supply & fix flameproof / weather proof Elbow M25 complete all as specified & as directed by Engineer-in-charge. 156 Supply & fix flameproof / weather proof bend M25 complete all as specified & as directed by Engineer-in-charge. 157 M&L for Earthing complete with GI earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to GI wire 4mm dia as earth lead up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with expanded metal(weight not less than 4 kg/sqm), and frame of angle iron 25x25x6mm with lugs 02 nos with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including light grade GI watering pipe 20mm bore with funnel andwire mesh and light grade GI earth wire protection pipe 15mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified anddirected by Engr-in-charge including taking down of old one.

BRR:7509408 Tender For Special Repairs To Building No P-106 At Ramnad Under Ge Tirunelveli(Tender Id:2025_Mes_ 697977_2); 1 Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and rubbish off the premises complete allas directed. 2 Material and labour vitrified ceramic tiles 10mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqmin floorsset and jointed in neat cement slurry and pointed in white or coloured cement to matchincluding screed bed or bedding layer of mortar 15 mm thick in CM 1:6complete all as specified. 3 All as per item no 02 above but in vertical surfaces including backing coat of 10mm thick in CM 1:4on brick walls for skirting/DADO complete all as specified and as directed. 4 Material and labour Non Skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 in floors etc complete all as specified and as directed. 5 Material and labour for 450x350x7mm thick glazed coloured ceramic tiles in vertical surfaces set and jointed in neat cement slurry pointed in coloured cement to match over backing coat of 10mm thick in CM 1:4complete all as specified and directed. 6 Material and labour Machine cutpre polished kota stone slab flooring 20-25mm thick over cement screedbase15mm thick in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 7 Material and labour kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed including backing coat of 10mm thick in CM 1:4on brick walls for skirting/DADO complete all as specified and as directed. 8 Supply and fixing 15mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,with all fittings including taking down old existing pipe complete all as specified and as directed. 9 Supply and fixing 20mm Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,with all fittings including taking down old existing pipe complete all as specified and as directed. 10 Supply and fixing in repair vitreous China wash down water closet pan (pedestal pattern) white, incl. P or Strap, connection to drain and flushing pipe including seat cover for pedestal pan complete all as specified and as directed. 11 Supply and fixing in repairs vitreous China wash basin white, flat back, size 550X400 mm including cutting for pinning in ends of brackets, complete all as specified and as directed. 12 Supply and fixing in repairs 10 litre capacity PVC low level flushing cisternwith all accessories complete fixed with WC including syphonic pipe, PVC flushing pipe of size 32mm dia complete all as specified and directed. 13 Supply and fixing in repairs 15mm dia bore stop cock/angle cock, cast fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions and fixed complete all as specified and as directed. 14 Supply and fixingPVC connection 15mm dia and 450mm long with PTMT nuts complete all as directed. 15 Supply and fixing in repairs CP brass chromium plated shower rose 125 mm size fixed to 15mm pipe of revolving type complete all as specified and as directed. 16 Supply and fixing as in repair grating square 100mm size of PTMT(minimum 100 gms) complete all as specified and as directed. 17 Supply and fixing in repairsbib taps fancy type 15mm dia bore, chromium plated,with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. 18 Supply and fixing in repairs pillar taps, fancy type 15mm dia bore, chromium plated, screwed down high pressure, with or without lettered `Hot or `Cold with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. 19 Supply and fixing in repairs 5.50mm thick of size600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. 20 Material and labour in repair 75 mm dia PVC(SWR) floor trap with grating including jointing with solvent cement complete all as specified and directed. 21 Material and labour in repair 110mm dia PVC(SWR) gully trap setting and hoisting with solvent cement complete all as specified and directed. 22 Supply and fixing rotational moulded polyethylene water storage tanks 500 ltrs capacity (White colour), three layer (cylindrical or vertical with closed top) hoisted and fixed in position, including dismantling the existing one and removing to MES store yard, including dismantling water tanks complete all as specified and as directed. 23 Supply and fixing in repair for 20 mm dia bore Ball brass valves, high pressure, with polythene float and fly nutscrewed for iron pipe or brass ferrule and fixed all as specified and as directed. 24 Supply and fixing in repairs 20 mmdia gun metal, globe or gate valves, with iron head, screwed both ends for iron pipe all as specified and as directed. 25 Supply and fixing in repairs Tubular towel rail aluminium anodised powder coated, 20mm dia, D type, 60cm long between flanges all as specified and as directed. 26 Taking down old door or window or cup board Chowkhats or frames n.exc 1.50 sqm each with shutters but without taking off shutters from the frames complete all as specified and directed. 27 Taking down door or window or cupboard Chowkhats of frames of size exc 1.5 sq.m but n exc 4sqm each with shutters (Without takingof shutters from the frame) complete all as specified and directed. 28 Supply and fixing powder coated Anodised aluminium window and ventilator shutters, sliding type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. 29 Supply and fixing anodised aluminium door shutters aluminium section 0.55kg/m including necessary joining cleats , glazing clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc with powder coating complete all as specified and directed. 30 Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. 31 Supply and fixing Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,as per specification & drawing. 32 Material and labour 18mm thick PVC cupboard Frames & shutters with decorative face veneers on both faces including necessary hinges, handles and locks fixed with screws all as specified and as directed. 33 Supply and fixing powder coated aluminium frame for doors, windows, ventilators, partitions with one or more rebates including anodised aluminium snap beading, stainless steel screws joining cleat for fixing etc complete all as specified and as directed 34 Supply and fixing 4.8mm thickfrosted sheet glass ordinary quality fixing with necessary rubber gasket and beadings etc in squares exc 0.50 sqm in each pane complete all as specified and as directed. 35 Material and labour for 12mm thk prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specifiedand as directed 36 Supply and fixing 100mm mild steel butt hinges medium weight including screws complete all as specified and as directed. 37 Supply and fixing aluminium anodisedbarrel tower bolts 150mm of extruded section complete all as specified and directed. 38 Supply and fixing aluminium handle 125 mm cast type anodised complete all as specified and directed. 39 Supply and fixing 250 mmlongAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. 40 Taking down cement plaster of any description on bricks or stone walls , RCC ceiling etc, including racking out joints, hacking for keys, scrubbing down with water etc, all as specified and as directed. 41 Material and labour for 15 mm thick cement plaster in two coats 5mm thk in CM 1:4 with WPC over 10mm thk in CM 1:6 on brick wall or concrete surfaceand finish the surface fair and even complete all as specified and directed. 42 Material and labour Preparation of new plastered surface on wall by and applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and as directed . 43 Material and labour for 10 mm thick cement plaster in CM(1:6) on brick wall or concrete surface finish the surface fair and even without using extra cement complete all as specified and directed. 44 Material and labour preparation ofnew plastered wall surfacesand applying two coats of oil bound distemperover a coat of primer and a coat of1mm wall care putty all as specified and as directed . 45 Material and labour for 5mm thickin CM(1:3) on ceiling and finish the surface fair and even without using extra cement complete all as specified and directed. 46 Material and labour preparation of newly plastered ceiling surfaces and applying two coats of oil bound distemper over a coat of primer all as specified and as directed . 47 Material and labour complete removal of existing painted wall surfaces and applying two coat or more of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm in camouflage pattern complete all as specified and as directed 48 Material and labour complete removal of existing painted wall surfaces and applying two coats of Oil bound distemperover a coat of primer and 1mm thk wall care puttycomplete all as specified and as directed. 49 Material and labour complete removal of existing painted ceiling surfaces and applying two coats of Oil bound distemper over a coat of primer complete all as specified and as directed. 50 Material and labour for preparation of old painted surfaces of wood or wood based surfaces over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surfaces complete all as specified and as directed. 51 Material and labour for preparation of old painted steel/roof surfaces any description over 10cm girth and applying one finishing coat of synthetic enamel paint on steel surfaces complete all as specified and as directed. 52 M& L for complete removal of existing roof treatmentfrom roof slabincluding taking down existingcement mortar, cleaning of the rubbishes and disposal of the same to a distance n exc 250 m. complete all as specified and as directed. 53 Supply only integral water proofing compound 54 Material and labour for complete removal of existing roof treatmentfrom roof slabincluding taking down existingcement mortar, cleaning of the rubbishes and disposal of the same to a distance n exc 250 m. and providing APP based membrane roof treatment in layers with the following course of treatment from bottom to top :-(a) Brushing neat cement slurry with 3.0 kg of cement per sqm(b) Screed bed or bedding layer of mortar 20mm thick in CM 1:4 with WPC @ 3% of weight of cement(c) Applying bituminous primer @ 0.40 Lit/Sqmover plastered surfaces of roof slab including parapet wall. (d) APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified. Polymeric membrane shall be taken to a height of 45 cm (minimum) and then inserted inside the groove of parapet wall and shall be filled with bitumen mastic filling.(e) Applying two coats of bituminous Aluminium paints on top of APP membrane surfaces @ rate of 0.10 Lit/Sqm for each coat. 55 Note :(i) The work in respect of water proofing treatment shall be carried out only by authorized / approved applicator of the manufacturers / firms of APP membrane. The contractor shall produce the evidence in support of work carried out by the authorized applicator as approved by manufacturers / firms before claiming payment.(ii) Laying APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions.(iii) A minimum overlap of 150mm and 100mm should be made at the end and side of the polymeric membrane respectively and sealed overlaps and joints as per manufacturers instructions. (iv) Coved fillets in PCC(1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces. 56 Demolition of cement concrete reinforced Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified and as directed. 57 Material and labour providing, RCC in Fins, fascias, louvers, parapets, and railings exc. 60cm in height, newels, balustrade, and the like using type B1(20mm graded aggregate) complete all as specified and as directed. 58 Formwork to fins, louvers, fascia complete all as specified and as directed. 59 Supply and fixing Mild steel bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends bindingand welded to existing bar with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips along with necessary formwork complete all as specified and as directed. 60 Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. 61 Supply and fixing 110mm in repairs PVC (SWR) pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. 62 Supply and Fix in repair Vitreous China bowl Urinal , flat back, size of 465 x 355 x 265mm white (minimum), with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs brass screws pointing around urinal for discharge pipe complete all as specified and directed. 63 Supply and fix Waste coupling of PTMT 32mm bore dia of discharge pipe (half or full threaded)(Minimum weight 32mm -45gms) for urinals fixed complete all as specified and as directed. 64 Supply and fixing PVC (SWR) Vent cowl of bore dia 110mm complete all as specified and as directed. 65 Supply and Fix door stopper of aluminium alloy,anodised with hard drawn steel spring of length 150mm complete all as specified and as directed. 66 Supply and fixing Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. 67 Supply and fix Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed. 68 Demolition Concrete in ground floors unreinforced and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. 69 Material and labour for 75mm thick cement concrete type C-2, ( 1:3:6) (40 mm graded aggregate) as in plinth protection finished fair and even without using extra cement etccomplete all as specified and as directed. 70 Supply and fixing in repairs Harrison curtain rails, mild steel, chromium plated with fixing brackets, stops, rollers etc. complete all as specified and as directed. 71 Supply and fix in repairs door closer hydraulically regulated aluminium extruded section, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. 72 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 73 Material and labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc.,including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the floor or the side of waist slab with suitable arrangement complete all as specified and as directed. 74 Supply and fixing 75mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed. 75 Supply and fixing 75mm dia PVC (SWR) pipes double socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed. 76 Supply and fixing 110mm dia PVC (SWR) bends complete all as specified and as directed. 77 Supply and fixing 110mm dia PVC (SWR) branch piece, double (double Y) equal or unequal complete all as specified and as directed. 78 Material and labour 25mm thk Cement concrete type B-1, 1:2:4 (20mm graded aggregate) complete all as specified and as directed. 79 Supply and fixing 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kg/ cm2 on wall complete all as specified and as directed. 80 Taking down copper/aluminium point wiring (light, fan, socket or power)including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc., removing materials to store for keeping in safe custody for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and as directed. 81 Material and labour for point wiring in replacement with two single core 1100 V grade FRLS-H conforming to IS-694 PVC insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor drawn through and including rigid PVC conduit and conduit accessories fixed on surface including breaking of walls and making good to disturbed surfaces in wall/roof/ceiling where required completean earth wire of PVC cable 1.5 Sqmm multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for the following :- 82 (a) One light point , controlled by one switch complete 83 (a) One light point , controlled by two switch complete 84 (b) One fan point, controlled by one switch complete 85 (c) One 3 pin 5 Amps switch socket combination on independent board 86 (d) One 3 pin 5 Amps switch socket combination on the same board with other switches, 87 All as per item No 80 above butwith 4.0 Sqmm single core PVC sheathed FRLS-H copper conductor cable, with PVC conduit for 3 pin socket outlet 15 amps on independent board 88 Supply and fixing ceiling rose in replacement , surface bakelite, 65x50mm, two to three terminals complete all as specified and as directed by the Engineer-in-Charge 89 Supply and fix in replacementswitch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed 90 Supply and fix in replacementswitch flush type single pole two way 5 A 240 Volts complete all as specified and as directed. 91 Supply and fix in replacement Socket outlet 3 pin, 5A, flush type complete all as specified and as directed. 92 Supply and fix in replacement switch Socketcombination 2 in 1,5 Amps Flush type 240 Voltscomplete all as specified and as directed. 93 Supply and fix in replacement switch Socketcombination 5 Amps / 16 amps, 5 in 1 flush type 240 Voltscomplete all as specified and as directed. 94 Supply and fixing in replacement of Stepped type Electronic Fan Regulator, Flush type on the existing phenolic laminated sheet complete all as specified and as directed. 95 Supply and fix in replacementfor Wiring for Circuit / Sub main Wiring of size 4x4.0 sq. mm along with earth wire of size 2 x 4.0 sq.mm, Single Core, PVC insulated copper conductor FRLS-H Cable in surface / recessed PVC Conduit of 32 mm dia complete all as specified and as directed.Note: Four runs of main cable, 2 runs of earth wire and one run of PVC conduit shall be measured as one unit for payment. 96 Supply and fixin replacement for Wiring for Circuit / Sub main Wiring of size 2 runs of 2.5 sq.mm along with earth wire of size 1 run of 2.5 sq.mm, Single Core, PVC insulated copper conductor FRLS-H Cable in surface / recessed PVC Conduit of 25 mm dia complete all as specified and as directed.Note: Four runs of main cable, 2 runs of earth wire and one run of PVC conduit shall be measured as one unit for payment. 97 Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board,TPN 6 way prewired DBsuitable forMCB Incomer IP 43 , IK 09 ,including disconnecting electric connections complete all as specified and as directed. 98 Supply and fix in replacement sheet metal enclosure powder coated double door for Distribution Board,TPN 4 way prewired DBsuitable forMCB Incomer IP 43 , IK 09 ,including disconnecting electric connections complete all as specified and as directed. 99 Supply and fix in replacement415V 10KA B curve miniature circuit breaker (MCB) of TPN 40 A in the DB complete including testing and commissioning complete all as specified and as directed. 100 Supply and fix in replacement415V 10KA B curve miniature circuit breaker (MCB) of TPN 16 A in the DB complete including testing and commissioning complete all as specified and as directed. 101 Supply and fixMCB SP 6 A, B curve, 10 kA including , disconnecting electric connections, dismantling from position unserviceable MCB for taking into credit completeall as specified and as directed. 102 Supply and Fix in replacementLED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed 103 Supply and fix in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. . 104 Supply and fix in replacement LED light fitting 1x9W/1X10Wbulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. 105 Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated complete all as specified and directed. 106 Supply and fix exhaust fan in replacement , steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louverscomplete all as specified and directed. 107 Material and labour for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; andconcealed conduit wiring, etc., and making good and painting to match with existing wall colour, cutting not exc 10cm girth in brick walls complete all as specified and as directed by the Engineer-in-Charge 108 Supply and fix in replacementGI bracket made out of 32 mm dia GI pipe length 1.2 mtr long bent to an angle 135 degreepainted with two coats of aluminium paint over a coat of zinc chromate primer along with clamps, bolts, nuts etc complete allas specified. 109 Supply , erection, testing ofmaintenance free chemical earthing byauguring & installation of copper bonded rod using machine bore and filling with backfill compound.The specification is (a) Low Carbon High Tensile Steel rod copper bonded rod of dia 20.2 mm with Copper Plated (250+ microns) , length 3m , with top end of the rodconnected with copper plated welded bus bar terminal of dimension 150mm x 50mm x 6 mm, complete conforms to IS : 3043 - 1987 (b) The earth pit bore dia should be 150 mm and length 3 m(c) Backfill compound with following specification has be filled in the bore after placing the copper bonded rod : - Carbon based, high conductive backfill compound Conductolite(50 kg per electrode to be filled around each electrode )with resistivity< 0.5 ohm-metre (In dry conditions) & resistivity is non-moisture dependant,pH Value : 8.0 - 9.0, electronic & ionic conduction, less susceptible to shrinkage, with hygroscopic & corrosion resistive properties (d)covering with Heavy duty Earth pit Chamber cover made of HDPE with high strength to weight ratio ( Capable of withstanding upto 8 ton) , Bottom opening dia - 348 mm Top opening dia - 256 mm, Height -260mm . Make : M/s Ashlok Safe Earthing Electrode Limited. Code : ASEEL CBR 203 250 WBB 110 Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 mm dia galvanised iron or steel wirecomplete all as specified and as directed by the Engineer-in-Charge 111 Supply and fixing in replacement LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

BRR:7502064 Providing, Erecting And supplying Various Different Electric Material For 1 Year@Grampanchayat Phulgaon -Electric Material This Rate Please Mentioned Include Gst Invoice Shall Be Prepared With Gst Tax Whatever Applicable On Material Rate Are Mentione With Gst , Pvc Tapes/G 8Mtr , Wire Servies 4Mm Isi Heavy , Led Driver 6-22W , Led Chip 15W , Led Chip 24W , Led Chip 30W , Led Chip 36W , Led Chip 50W , Led Driver 24W , Led Driver 36W , Led Driver 50W , Led Driver 60W , G.I.Pipe 1*1/2R , Pl Tube 36 Watt , Chock 36/40W Electronic , Led Lamp 09W , Led Lamp 15W , Led Lamp 20W , Led Lamp 45W , Led Streetlight 30W , Led Streetlight 36W , Led Streetlight 50W , Led Streetlight 60W , Led Streetlight 72W , Led Streetlight 100W , Led Streetlight 120W , Rawal Plug 25*8 , P.L. Holder 36W , Streetlight Ms Pole Round 6Mtr , Streetlight Ms Pole Round 7Mtr , Streetlight Ms Pole Single Arm Bracket , Led Pll 18W , Cob 06W , Connector Strip 15 Amp , Line Tester Industrial , Line Tester Mazboot , Plier 8 Taparia , Taparia Screw Driver 2 In 1 (903) , Mcb 20A Sp , Pvc Surf Box Amaze 1/2 M , Other Tansfortation Charges , Gst Charges Other Government Taxes

BRR:7501973 Tender For Comprehensive Maint To Central Amenities Under Age Br Ii At Rms; 1 M&L 15mm thick plastering in CM (1:4) on one side of lathing in two separate layers without using extra cement but using water proofing compound @ 3% by wt of cement and surface finished even and smooth including demolition of reed, lathing single or double, including battens and plaster or chicken wire lathing with and including M&L for GI wire netting 0.71 mm dia and 12 mm mesh lathing in to reed in walls incl all laps cutting and waste complete all as specified and as directed.Note:-WPC will be measured and paid separately. 2 M&L for rendering 12 mm thick in CM (1:6) on other side of lathing surface finished even and smooth without using extra cement complete all as specified and as directed. 3 M&L brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan to any radius in half brick thick walls built in CM (1:4) including demolition of old brick work complete all as specified and as directed. 4 M&L for brick work with sub class B bricks(using old size burnt bricks) straight or curved on plan exceeding 6 m mean radius, built in Cement Mortar (1:6) including demolition of old brick work complete all as specified and as directed. 5 S & F second class hardwood weather boarding, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20mm thick and fixed with 30mm laps complete all as specified and as directed. 6 M&L for second class hardwood as in scantlings clean sawn timberfixed including dismantling of old unsv timber scantling complete all as specified and as directed. 7 Taking down Chowkhat or frames not exceeding 1.5 Sqm each with shutters(Without taking off shutters from the frames complete all as specified and as directed. 8 Taking down chowkhat or frames exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed. 9 S&F Pressed steel frames of size 125 X 60mm (Thickness of MS Sheet 1.25mm) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified, supplied and fixed etc complete all as specified and directed. 10 S&F factory made 30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and as directed. 11 S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats complete all as specified and as directed. 12 S&F Powder Coated aluminium colour frame for doors, windows, ventilators and partition etc with one or more rebates including joining cleat for fixing complete all as specified and as directed. 13 S&F Powder Coated aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specifie 14 S&F for powder coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section of size 40 x 18 x 1.29mm thick including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and as directed. 15 S&F sheet glass 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed. 16 S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. 17 S & F 100 size stainless steel butt hinges complete all as specified and directed. 18 Supply & Fixing150 mm Aluminium handles, cast type, anodised complete all as specified and as directed. 19 S & F 200 mm Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed. 20 S & F 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and as directed. 21 M&L for preparation of new plastered or un plasteredsurface of walls including cornices, pilasters etc and applying two coats of cement base paint over and including a coat of primer complete all as specified and directed. 22 M&L for applying two coats of oil bound distemper on new plastered surfaces of walls including preparation of surface complete all as specified and as directed. 23 M&L for preparation of newsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying two coats of synthetic enamel paint over and including a coat of red oxide primer on new surfaces in any tint complete all as specified and as directed. 24 M&L for preparation of new untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 25 M&L preparation of old surfaces of wallsapplying one coat of cement base paint complete all as specified and as directed. 26 M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilbound distemper on walls complete all as specified and as directed. 27 Demolition, Cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge. 28 M&L for 75 mm thick PCC (1:3:6) type C-2 , (using 40 mm graded stone aggregate) in plinth protection/aprons/path laid to slope of 1:12, finished fair and even without using extra cement with and including all necessary formwork to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 10 mm wide joints throughout thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and as directed. 29 M&L for Vitrified Ceramic tiles (Light shade) of size 600mmx600mm x (9-10) mm thick (square/ rectangular) polished, laid in floorsover and including 15mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 30 All as per Item No. 29.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM (1:4). 31 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm,in floors laid over and including 15mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles includingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 32 All as per Item No. 30.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM (1:4). 33 M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile laid over and including baking coat of 10 mm thick in CM (1:4) includingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 34 M&L for Non Skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm,in floors laid over and including 15mm thick screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tilesincludingdemolition of old Stone slabs/tiles of any description removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. 35 All as per Item No. 34.00 (here-in-before) but on vertical surfaces such as skirting , dado risers to stepsover and including 10 mm thick bedding layer in CM (1:4). 36 S & F,Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed. 37 S&F Factory made solid panel pvc doorshutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing at site as per specification and drawing complete all as specified and as directed. 38 M&L for cement concrete type B-1 (1:2:4) (using 20 mm graded stone aggregate) as in surface channels and drains complete all as specified and as directed. 39 M&L for Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement incl firms mouldscomplete all as specified and as directed. 40 Demolition of cement concrete in reinforced of any description and in any position not otherwise specifically provided, complete all as specified & directed. 41 M&L for Cement concrete type B-1 (1:2:4), 40mm thick as in levelling course (using 20 mm graded stone aggregate),complete all as specified and as directed. 42 M&L for PCC (1:4:8) type D-2, 75 mm thick (using 20 mm graded stone aggregate) as in sub base of floor complete all as specified and as directed. 43 M&L for chequered cement concrete tiles of size not less than 300x300x25mm thick laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) etc, set, jointed and pointed in neat cement slurry with grey cement and pigments complete all as specified and directed. 44 M&L for TMT bars, 6 to 8mm, cut to length, bent to shape required including cranking,bending spirally for hooping for column, hooking ends and binding with and incl MS wire(annealed) not less than 0.9 mm dia complete all as specified and as directed. 45 M&L for precast cement concrete type B-1 (1:2:4)(Using 20 mm graded stone aggregate) as in cover slabs, manhole cover, chamber cover and drainge cover set in cement mortar 1:6 including necessary formwok complete all as specified and as directed. 46 S&F in repairstubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 15 mm bore complete all as specified and as directed. 47 S&F in repairs tubes medium grade, galvanised wih all fittings and fixed complete to walls and ceiling or laid on floors etc, 20 mm bore complete all as specified and as directed. 48 S&F in repairsvitreous china wash hand basin including brackets, white size (550 x 400) mm including cuttingfor and pinning in ends of brackets. Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and as directed. 49 S&F in repairsvitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as specified and as directed. 50 S&F in repairsVitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe incl Urinal spreader complete all as specified and directed. 51 S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and dual fluash type complete all as specified(Make Cera, F1020106) complete all as specified and directed. 52 S&F in repairs for 15mm dia of pipe CP bib taps cast copper alloy, fancy type, chromium plated with , screwed for iron pipe or for brass ferrule and fixed. 53 S& F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot or ‘Cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. 54 S&F in repairs for 15mm dia of pipe stopvalves,fancy type and chromium plated, screwed down high pressure ,screwed both ends for iron pipes or for Unions and fixed complete all as specified and as directed. 55 S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete all as specified and as directed. 56 S&F in repairs brass chromium plated shower rose 125 mm in size with or without swivel joints any size incl fixing to steel pipe or union, complete all as spfd & directed 57 Supply and fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed. 58 S&F grating doom 125mm dia with waste hole of PTMT (Min wt 40 gms) complete all as specified and as directed. 59 S&F in repairs 600mm long tubular towel rail brass chromium plated 20mm dia, D type 60cm long fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement mortor 1:3 with MS screws complete all as specified and as directed. 60 S& F in repairs PVC mounted 5mm thick bevelled edge looking mirror 600 x 450mm including taking down old fixed with chromium plated brass screws and cup washers complete all as specified and as directed. 61 S&F in repair 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed under floor complete all as specified and as directed. 62 S&F in repair 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed under floor complete all as specified and as directed. 63 S&F of 110mm dia PVC (SWR) bends complete all as specified and as directed. 64 S&F 75mm PVC(SWR) bends any radius with acess door complete all as specified and as directed. 65 S&F of 75mm dia PVC (SWR) Vent cowl complete all as specified and as directed. 66 S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. 67 S&F in repairs for 75mm bore dia pipe Stack clamps out of 50mm by 5mm flat iron & 16mm dia round iron stays, including bolts & nuts & securing ends of stay to wall or roof complete all as specified and as directed. 68 S&F in repairs rotational moulded polyethylene 500 Ltrs Capacity water storage tanks(cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I) including ball brass valve, with polythelene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and as directed. 69 S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping including dismantling of old unsv ceiling boards (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any location complete all as specified and as directed. 70 M&L for rendering 15mm thick in CM (1:6) on fair faces of brick work or concrete surfaces and finished fair and even without using extra cement including taking down old cement plastercomplete all as specified and as directed. 71 M&L for rendering 15mm thick in CM (1:4) other than fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement including taking down old cement plastercomplete all as specified and as directed. 72 Material & labour 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints including taking down old cement plastercomplete all as specified and as directed. 73 S & F Pre-painted galvatume aluminum zinc coated GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 74 S & F Pre-painted galvatume aluminum zinc coated GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws including dismantling of oldAsbestos cement sheet (Corrugated, semi corrugated etc ) in roof covering /plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. 75 M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to GDE Fe 410-0-or Fe 310-0 quality-Aincluding dismantling of wrought iron or mild steel work of any description complete all as specified and as directed. 76 M & L for PCC 25mm thick type B-0, (1:2:4) (using 12.5 mm graded stone aggregate)as in levelling corse of floor complete all as specified and as directed. 77 M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete laid over 20mm thick screed bed in CM 1:3 complete all as specified and as directed. 78 S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specificationcomplete all as specified and as directed. 79 M&L for Solid PVC Wall Lining consisting of 5mm thick Plain or coloured with wood grains printed PVC sheet inclusive of solvent cement and fixing at site on PVC frameincluding dismantling of old unsv wall panelling (fibre, pulp, insulation, etc.) any thickness including cover fillets of any description and at any locationcomplete all as specified and as directed. 80 M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. 81 S&F in repairs 20mm diaHarrison rails, mild steel, chromium plated with fixing brackets, stops, rollers complete all as specified and as directed. 82 S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position completein all respect as specified complete all as specified and as directed. 83 S&F 2 mm thick anodised aluminium composite panel fixed in aluminium frame including necessary rubber beading, jointing cleats complete all as specified and as directed. 84 S&F in repairs, One Piece Closets vitreous china water closet Padestal pattern (white)including fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as directed. 85 S&F in repairs WHB Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe complete all as specified and as directed. 86 S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Sheet cover complete all as specified and as directed. 87 M&L for Point wiring in repairs complete with two runs of 1.5 sqmm single core PVC insulated FR-LSH cable1100 volts grade with multi-stranded copper conductors, drawn throughand including PVC double locked Casing & caping/PVC Conduit pipe medium grade including provision of 1.5 sqmm, FR-LSH, PVC insulated copper cable as earth continuity conductor connected to common earth dolly, including PVC rectagular box for mounting switches / sockets / regulators complete all as specified and as directed. 88 Onelight controlled by one, one way switch. 89 One Ceiling fan/ Exhaust fan point controlled by one, one wayswitch. 90 One 3 pin socket outlet 5 Amps on the same board with other switches. 91 One 3 pin socket outlet 5 Amps on theIndependent board 92 One bell pointcontrolled by one, one way switch . 93 All as per item No- 88.00 here-in-before but with 2.5 Sq mm for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sq mm copper conductor green in colour as earth continuity conductor connected to common earth dolly complete all as specified and as directed. 94 S&F Switch Piano, flush type single pole, one way 5 Amps complete all as specified and as directed. 95 S&F Socket outlet, 2 in 1, 5 pin 5A flush type complete all as specified and as directed. 96 S&F Switch Socket combination, 2 in 1, 5 pin 6A flush type complete all as specified and as directed. 97 S&F Switch Socket combination, 2 in 1, 5 pin 6A/16A flush type complete all as specified and as directed. 98 S&F stepped type electronic fan regulator 100 Watt socket size flush type on the existing phenolic laminated sheet complete all as specified and as directed. 99 S&F in repair ceiling rose 3 terminal PVC/Polycarbonate isolated body with PVC round/squareblock complete all as specified and as directed. 100 S&F in replacement of Bell AC 230 volts musical type complete all as specified and as directed. 101 S&F in repair bell push switch 5 amps piano type flush typecomplete all as specified and as directed. 102 S&F in repairs 20W LED, 4, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fittingcomplete all as specified and as directed. 103 S&F in repairs 09 W LED, 2, Wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver.etc with all accessories internally pre-wired and fixing the same and connecting upwith flexible copper cable from ceiling rose to the light fittingcomplete all as specified and as directed. 104 S&F in repairs Lamp holder , PVC/ Polycarbonate type with PVC round/square block for lamp holder complete all as specified and as directed. 105 S&F in repairs LED lamp 9 Watt suitable for lamp holder fittings complete all as specified and as directed. 106 S&F in repair and testing of vertical type wall mounted storage water heater of Capacity 25 Ltrs BEE 5 Star rated or minimum Standing Loss of 0.511 kWh , 240V, 50Hz with Maximum power consumption of 2KW , dry powder fero glass line coating technologyfor inner tank with incoloy heating elementwith minimum4 years warranty , ABS outer body , 2 units of PVC connection pipe with length of 450mm length for hot and cold water supply with complete Accessories complete all as specified and as directed.Note:-Old wall mounted storage water heater shall be deposited to MES AGE(E/M) Store 107 S&F in repairs/replacement piano switch single pole 5A, one way complete all as specified and as directed. 108 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A Flush complete all as specified and as directed. 109 S&F in repairs/replacement switch socket combination 2 in 1, 3 pin 5 A/16A Flush complete all as specified and as directed. 110 S&F in repairs/replacement socket outlet 5 pin 6A, 230 volt flush type complete all as specified and as directed. 111 S&F in repairs/replacement fan regulator 100/120 wall step type AC 220 volt complete all as specified and as directed. 112 S&F in repairs PVC switch board 10x12 suitable for switch socket complete all as specified and directed. 113 S&F in repairs PVC switch board 8x10 suitable for switch socket complete all as specified and directed. 114 S&F in repairs PVC switch board 8 x 6 suitable for switch socket complete all as specified and directed. 115 S&F in repairs PVC switch board 7x4 suitable for switch socket complete all as specified and directed. 116 S&F in repairs PVC switch board 4 x 4suitable for switch socket complete all as specified and directed. 117 S&F in replacement of PVC cassing & caping 25 mm complete all specified and as directed. 118 S&F in replacement of PVC cassing & caping 32 mm complete all specified and as directed. 119 M&L for replacement of PVC conduit 20mmcomplete all as specified and as directed. 120 M&L for replacement of PVC conduit 25mmcomplete all as specified and as directed. 121 S&F in repairs for engagement LED 0.5w light red, green, complete all as specified and as directed. 122 M&L for sub main wiring Casing capingtwo run 4.0 Sq mm and one run of 4.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 4.0 Sq mm +one run of 4.0 Sq mm and one run of PVC casing caping and its accessories of suitable size shall be measured as one unit length including taking down old unsv one complete all as specified and directed. 123 M&L for sub main wiring Casing capingtwo run 6.0 Sq mm and one run of 6.0 Sq mm for earth wire with multi standard copper conductors, 1100 volts grade, drawn throughand includingcasing caping complete all as specified and as directed. NOTE:- Two runs of 6.0 Sq mm +one run of 6.0 Sq mm and one run of PVC casing caping and its accessories of suitable size shall be measured as one unit length including taking down old unsv one complete all as specified and directed. 124 S&F in repairs MCB Distribution board double door type TPN 4 way, sheet steel, powder painted, with copper bus bar neutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed. 125 S&F in repairs MCB TPN 63 Amps, 415 volts, 50 Hz suitable for fixing in MCB DB C series complete all as specified and as directed. 126 S&F in repairsMCB Distribution board double door type SPN 8 way, sheet steel, powder painted, withneutral link & earth bar etc. and fixing MCBs of various rating capacitycomplete all as specified and as directed. 127 S&F in repairs/ReplacementMCB SPN 32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioningcomplete all as specified and as directed. 128 S&F in repairs MCB SPN 40 to 63 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 129 S&F in repairs MCB SP 5-32 Amps, 230 volts, 50 Hz suitable for fixing in MCB DB C seriescomplete all as specified and as directed. 130 S&F in repairs LED luminaire 600 mm x 600 mm, 35/36 watt, white/warm colour 220 AC recessed surfaced type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling and connecting up with driver, three core flexible copper conductor of suitable size complete all as specified and as directed. 131 S&F in repairs LED Bldg Security light fitting of capacity 25 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete with and including 1.2 mtr GI bracket of 25mm bore light grade bent to shape and fixed on wall with metal fastners 2 Nos 10mm dia incl drilling of holes as reqd and connecting up with flexible copper cable of size 0.75 sqmm 3 core from ceiling rose to the light fitting complete all as specified and as directed. 132 S&F in repairs globe light 8 dia made up of high grade unbrekable polycarbonate material suitable for retrofit LED lamp B22 including base holder bracket, MS pipe 40mm dia 1.5 mtrs long complete with 9 Watt LED Bulb and all accessoriesmaking good to the disturded surfaces by providing cement conrete M-15 (1:2:4) 20mm aggregate complete all as specified and as directed. 133 S&F in repairs LED Post of light 15 Watt, IP65 energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source Opal cover offers soothing uniform illumination for defferent applications all accessories complete all as specified and as directed. 134 S&F in repairs flexible copper wire 23/76 wire complete all as specified and as directed. 135 S&F in repairs PVC Exhaust fan PVC200 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces areacomplete all as specified anddirected by Engr-in-Charge.Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store 136 S&F in repairs PVC Exhaust fan PVC250 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces areacomplete all as specified anddirected by Engr-in-Charge.Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store 137 S&F in repairs PVC Exhaust fan PVC300 mm sweep single phase 50 Hz AC, air flow rate of1350 RPM including fixing on wall with suitale fastners, making holes of suitable size and making good distrubed surfaces area complete all as specified anddirected by Engr-in-Charge.Note : Old Exhaust fan shall be deposited to MES AGE(E/M) Store 138 Supply and fixing1100 volts grade heavy duty cable PVC insulated aluminium conductor, 6 Sqmm served with inner sheathing of PVC tape and overall PVC sheathed in service connectionsall as specified and directed incl taking down complete all as specified and directed by Engr-in-Charge.

BRR:7526203 tender for Electrical Power Connection For 110 Nos. Smart Road Signage At Different Locations Of Nabadiganta Township Area Including Its Ancillary Works, Under Ndita, 1 Taking out carefully Paver blocks from old footpath and stacking properly at suitable nearer site etc. all complete.Analysis rate: 2 60 mm thick interlocking designer concrete paver block M-35 grade for light-traffic zone,commercial & office complex,tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base ,sub-base course & subgrade preparation.)(ii) Coloured Decorative 3 Relaying &resetting interlocking paver block 60 mmof any shade and of approved quality over 75 mm thick medium sand as per IS:1237 -1980 laid in pattern as directed in pavement,Footpath,drive way etc. including necessary underlay complete in all respect with all labour and materials (Border concrete if necessary to be paid seperately)Analysis Rate: 4 Filling in foundation or plinth by silver sand inlayers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)B) Do - by fine sand 5 Removal of rubbish,earth etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. 6 Supplying of 1.1KV grade PVC insulated armoured Aluminium conductor of Size: 6 Sqmm, 2 Core (Make: Polycab/Gloster/Havells). 7 Laying of one No. cable upto 35 Sqmm. In underground trench 460mm wide x 760mm average depth. With brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, levelling up and restoring surface duly rammed. 8 Supply and delivery of 40mm dia heavy gauge polythene pipe for mechanical protection of underground cable. 9 Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring or dust & moisture-proof entry of XLPE/PVC armoured cables.Size: 6 sqmm, 2 core. 10 Finishing the end of following XLPE/ PVC armoured cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste and jointing materials.For 2 core, 6 sqmm 11 Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection10 Amp DPMake: Legrand/Siemens/Schneider 12 Add GST@18% on Sl. No. 1 to 11 13 Add labour cess @1% on Sl. No. 1 to 12

BRR:7526155 Installation Of Solar Light 1) Dhanghori Mohalla Para Maszid Jl No-15, Plot No- 45, 2) Keshiapata Church, 3) Baburbani Pry. School And 4) Rashikananda Math

BRR:7526090 Supply And Delivery Of Led Fittings At Different Areas In Wd-28, Br-Iv, Kmc.- 1 SUPPLY AND DELIVERY OF 200 WATT LED STREET LIGHT FITTINGS ANY SUPERIOR MAKE AS PER DIRECTION OF EIC AND AS PER KMC LAST STORE PURCHASE RATE WITH THE SPECIFICATION MENTIONED BELOW. I/P VOLTAGE-AC 110-300 , IP-66, P.F GREATER EQUAL TO 0.95 , SURGE PROTECTION GREATER EQUAL TO 4KV, CCT-COOL(6500K),THD LESS THAN 10% 2 SUPPLY AND DELIVERY OF 200 WATT LED FLOOD LIGHT FITTINGS ANY SUPERIOR MAKE AS PER DIRECTION OF EIC AND AS PER KMC LAST STORE PURCHASE RATE WITH THE SPECIFICATION MENTIONED BELOW. I/P VOLTAGE-AC 110-300 , IP-66, P.F GREATER EQUAL TO 0.95 , SURGE PROTECTION GREATER EQUAL TO 4KV, CCT-COOL(6500K),THD LESS THAN 10% 3 SUPPLY AND DELIVERY OF 40 WATT LED STREET LIGHT FITTINGS ANY SUPERIOR MAKE AS PER DIRECTION OF EIC AND AS PER KMC LAST STORE PURCHASE RATE WITH THE SPECIFICATION MENTIONED BELOW. I/P VOLTAGE-AC 110-300 , IP-66, P.F GREATER EQUAL TO 0.95 , SURGE PROTECTION GREATER EQUAL TO 4KV, CCT-COOL(6500K),THD LESS THAN 10% 4 SUPPLY AND DELIVERY OF 150 WATT LED STREET LIGHT FITTINGS ANY SUPERIOR MAKE AS PER DIRECTION OF EIC AND AS PER KMC LAST STORE PURCHASE RATE WITH THE SPECIFICATION MENTIONED BELOW. I/P VOLTAGE-AC 110-300 , IP-66, P.F GREATER EQUAL TO 0.95 , SURGE PROTECTION GREATER EQUAL TO 4KV, CCT-COOL(6500K),THD LESS THAN 10% 5 Sub Total 6 CGST 9% 7 SGST 9%

BRR:7526063 Procurement Of Illumination Items For Corporate Office, Wbpdcl , Supply , 2X2 Led,36W, Recess Mounted Additional Data: Squareshapped, Panel Light, Make: Philips, Crompton, Bajaj , 18W Recess Mounted Led Additional Data: Round Shaped, Panel Light, Make: Philips, Crompton, Bajaj , 18W Led Baton Light,4 Feet Additional Data: Make: Havells, Bajaj, Crompton , 10W Led Baton Light, 2 Feet Additional Data: Make: Havells, Bajaj, Crompton , 9W Led Spot Round Light Additional Data: Recess Mounted, Make: Havells, Bajaj, Crompton , 5W Led Spot Round Light Additional Data: Recess Mounted, Make: Havells, Bajaj, Crompton , 2W Led Spot Round Light Additional Data: Recess Mounted, Make: Havells, Bajaj, Crompton , 10A Modular Switch Additional Data: Make: Anchor, Havells , 10A Modular Socket Additional Data: Make: Anchor, Havells , 16A Modular Switch Additional Data: Make: Anchor, Havells , 16A Modular Socket Additional Data: Make: Anchor, Havells

BRR:7524992 Construction Of Ottapalam Stadium In Palakkad District In Ottapalam Legislative Assembly Constituency - Retender Ground Development Works - Demolition Works, Retaining Wall, Compound Wall, Protection Wall Around Pond, Drain, Bore Well, Indoor Stadium, Security Cabin, Oh Tank, Sump Tank And Pump Room, Solar System, Flood Lighting Work And Electrification Works

BRR:7524848 Repair/Maint /Replacement Of Perimeter Light, Flood Lights, High Mast Light, Street Lights And Allied Items In Domestic Area At Af Stn Ambala Under Ge(Af) Ambala

BRR:7524824 Tender For Provn Of 01Xhigh Mast Light Set For Convoy Ground At Suranussi .; 1 Supply, erection, testing and commissioning of 16m high mast light system for 9 luminaires (raising & lowering type with motor and manual) having following specifications & accessories.(a)High Mast : The high mast light system of 16m high mast, (made up of 2 sections) entirely high mast structure (internally and externally) and all MS part shall be hot dip galvanized. The high mast shall be of continuously tapered polygonal cross section of 20 sides made up of two sections having sheet thickness 4mm min for lower section and 3 mm min for upper section. The mast shaft shall be manufactured from high tensile steel plate conforming to S355 grade as per BS-EN 10 025 having longitudinal welded seam only and without any circumferential weld joint. The minimum dimension across flats of top shall be 150mm and bottom (base) 360 mm or as recommended by OEM. The base plate shall have thickness 25mm and diameter 560mm min. It shall have door at suitable height of size 1200x250mm min or as recommended by OEM having vandal resistance, weather proof type with pad locking facility. The base flange shall be provided with supplementary gussets between the bolt holes. The door opening shall be carefully designed and reinforced with welded steel section, so that the mast section at the base shall be unaffected and undue buckling of the cut portion is prevented. 2 (b) Luminaires Carriage:Hot dip galvanized luminaire carriage of suitable diameter designed to install symmetrically 9 Nos luminaries fabricated from ERW tubes in two halves having bolted flanged joints at side with stainless steel bolts and nuts to permit removal from an erected mast. Holes are to be provided in the bottom side of the tubes to act as conduit for wiring cables. Luminaires fixing arms and plates are to be welded to the carriage. Carriage shall have fitted with buffer arrangements to prevent damage to the mast finish during movement. Suitable junction box (as applicable) shall be cast aluminium weather proof provided on the carriage assembly for terminating the trailing cable and power cable to luminaries.(c) Winch/ Power tool:The double drum winch shall be completely self-sustaining without the need for brake shoe, springs or clutches and self-lubricating type by means of an oil bath. The worm gear ratio shall be of suitable ratio and having safe working load 500 Kg min (breaking load 2350 Kg). The drums are to be grooved to provide the perfect seat for the stable and tidy rope lay arrangement for distortion free rope and termination. The winch shall have provision to operate electrically through power tool or manually in case of power failure. single speed, 415 volt /240 volt reversible, power motor of 1.5 HP rating min or as recommended by OEM suitable to lift the load mounted on plate to adjust the length of motor of chain shall be provided in base compartment. 3 Mechanical torque limiter mounted on motor shaft for start/ stop transmission of motion shall be provided. The power tool shall be supplied with required wiring & accessories suitable to match with High mast control panel.(d) Hot dip galvanized head frame as a capping unit of the mast of the weldedsteel construction and provided with guides and separators between the rope and cable complete with aluminium pulleys with bush bearing mounted through stainless steel shaft suitable to accommodate wire rope and multi core trailing cables. The head frame to be provided with guides and stops with PVC buffer for the locking of the luminaire carriage. The pulley shall be covered with a hot dip galvanized canopy. The suspension wires shall be made of stainless steel wires rope - 05 No ( 3 Nos for lantern carriage & 2 Nos for double drum) of AISI 316 grade, 7/19 construction with central core in the same material of 6mm dia. The breaking load capacity of wire rope should be 2350 Kg x 2 minimum or as recommended by OEM. The end termination luminaire carriage shall be with stainless steel thimble etc.(e) The multi core flexible power trailing cable 5 core minfrom base compartment to junction box at luminaries carriage shall be EPR insulated PCP sheathed 1100 volts grade copper conductor with male female connectors of 2.5 Sqmm having suitable cores for 9 Nos luminaires or above as required at site for control of these lights as directed by Engineer-in-Charge. The system shall have in-built facilities for testing the luminaries while carriage in lowered position. 4 (f) One number heavy duty hot dip galvanized lightning finial shall be provided for the mast. The lightning finial shall be minimum 1.2 M in length or as required so that the lantern carriage also comes within the safety zone and shall be provided at the centre of the head frame. It shall be bolted solidly to the head frame to get a direct conducting path to the earth through the mast. The lightning finial shall not be provided on the lantern carriage under any circumstances in view of safety of the system. A suitable space shall be provided at base of the mast to connect with earthing. The mast shall have single/double dome LED aviation light at the top of suitable capacity with necessary connection wire/cable.(g)Mast shall be erected with foundation bolt set comprises of anchor plate with 8 Nos high tensile studs/bolts with nuts. The foundation bolt shall be TS600, 24mm diameter, 750 mm long or as recommended by OEM.(h) Construction of shallow foundation with suitable grade RCC/concrete or as recommended by OEM for the high mast considering the safe soil bearing capacity at site as 10 T/ sqm at 2 metre depth with all materials and labour complete as per OEM drawing after approval of Engineer-in-Charge. The rate also include the cost of PVC/GI pipe 3 inch dia required to be fixed in foundation concrete for the passage of cable. 5 Notes :(i) The quoted rate include the cost any type of special T&P, tools, equipments required at site for erection, installation of the complete high mast light system. The quoted rate include the cost of any control/junction box for lights, foundation PCC/RCC work other accessories, items which is necessary for the satisfactory functioning of the high mast light system but not mentioned in here. (ii) The contractor shall provide genuineness/ authentication certificate from manufacturer to confirm that High mast is of make approved by deptt as specified in CA. No payment shall be released till contractor provide the same. 6 S&F 250 watt Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium Housing IP66 flood light suitable for highlighting architectural facade and general purpose lighting Havellsmodel No. JETAIRISMAXFL250WLED757PWBLTG HSN Code 9405or equivalent from other specified makes in Appendix of Paricular specifications, complete for high mast light aaplication complete with fixing arrangment & bolts all as specified and directed by Engr-in-Charge. 7 M&L for earthing complete with galvanized steel earth electrode 60 cm x 60 cm x 6mm buried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead 32x6 mm dia by means of bolts, nuts, chock nuts and washers and other end connected to earthing test point including funnel, watering pipe of 20 mm bore (Light grade) GI pipe wire mesh, charcoal or coke and common salt in alternate layers all around the earth electrode compacted thickness 15 cm, earthing pit in PCC (1:3:6) type C1, 50 mm thick pre cast RCC cover slab (1:2:4) type B1 set in CM (1:4), reinforced with 8 mm dia TMT bars @ 15 cm c/c and suitable handle of 10 mm dia MS round bars including earth work in excavation in soft/loose soil, desposal of soil not exc. 50 meter complete and testing on completion all as shown in electrical plate No-5 of MES schedule, part-I complete all as specified and directed by Engineer-in-Charge. 8 Supply, installation, commissioning and testing ofHigh Mast Timer Panel(CPRI Approved) out door type 415 Volts, 50 Hz, 3 Phase 4 wire supply Pedastal mounted center opening with locking arrangement , factory assembled,CPRI approved, weather and vermin proof (protection class IP-54) canopy on top, outer door made out of 3.15 mm thick CRCA sheetfor individual hinged type door for MCBs , powder coated and supported on 40 mm x 40 mm x 5 mm M.S angle iron frame, height of legs 1000 mm min complete with Al Bus bar 150 Amp, min complete to accommodate including the following:-(a) TPN MCB 32 Amp-01 No(b) TP Contactor 25 Amp-01 No(c) TP Contactor 09 Amp-02 Nos(d) Digital Timer Switch astronomical type-01 Nos(f) SP MCB 6 Apm-01 No (g) Push Button-02 Nos (h) Toggle Switch-01 No (j)Glass Fuse-01 No (k) Neutral Link-01 No (l) Terminals:- (a)Incoming Suitable 35 Sqm-01 No (b) Outgoing 16 Sqmm(Close Type)-04 Nos© Outgoing 6 Sqmm (Close Type)-03 NosNote:-Quoted rate includes cost of all item i.e Contactor ,timer ,reqrd for up & down motion of mast light auto ON/OFF of High Mast light with manual Provision. 9 Supply and laying Cable XLPE Insulated PVC Sheathed, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 4 core complete all as specified and directed. 10 Excavation intrenches in soft/Lose soilnot exceeding 1.5 mtrdeep and not exceeding 1.5 mtr wide for laying of cable and erection of poles all as specified and directed at site. 11 Returning, filling in including spreading, leveling, watering and well ramming excavated soft/lose soilin layers , all as specified and directed at site. 12 Removing excavated materials (soft / lose soil )to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and directed. 13 M&L for sand cushioning to under ground cable using tibba sand and gently punning to cushioning to cable complete all as directed by Engr-in-Charge. 14 M&L for providing of new sub class B bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed. 15 S&F LED Aviation Light single dome 30 watt suitable for High Mast Light complete with fixing arrangment & bolts all as specified and directed by Engr-in-Charge. 16 Supply and fix in replacement of Time light distribution board analog Time switch 230 volt three phase of 16 Amps rating with contactor fixed inside steel enclosure box and fixed to pole/LT Panel including clamps, nuts, bolts and washers etc complete all as specified and directed.

BRR:7524696 Bids Are Invited For Led Batten (Q2) , Led Luminaire (For Flood Light) As Per Is 10322, Is 16107 (Q3) Mse Total Quantity : 800

BRR:7524663 6 Supply, Installation, Commissioning And Trial Operation Of Electro-Mechanical Components Of Baje Bindoli Water Supply Scheme Tw No. Ii In The District Of Uttar Dinajpur Under Malda Mechanical Division, Phe Dte.-1 Supply And Delivery At Site Of Following Pumping Machinery And Electrical Accrssories: 2 Submersible Pump Directly Coupled With Water Proof Suitable Size Motor Having Following Specification And As Per Nit Specification:Pumpdischarge Of Clear Water = ( Q ) = 28 M3 / Hr.Total Head ( H ) = 60 M.Shaft- Stainless Steelimpeller- S.S / Gmoutlet Size-80 Mmmotorsubmersible Type 3 Phase, 50 Hz, 415V ± 10% , 2900 Rpmmotor Mustbe Suitable For Operation With Star-Delta Starter This Item Will Be Procured Based On Yield Test Report Of T / W And Best Efiiciency Point As Per Direction Of Eic.Test Certificate Along With Characteristic Curve Shoule Besubmitted At The Time Of Delivery. 3 1.1 Kv Grade 4 Sq.Mm X 3 Core Water Proofflat Submersible Cable For Above Motor. 4 1.1 Kv Grade 25 Sqmm 3.5 Core Xlpe Insulated Al. Ar. Cable Cable Conforming To Is-7098 ( Part-1 ) 1988 With Upto Date Amendment. 5 Supply, Delivery And Storage At Site Of Wall Mounted 2 Mm. Thick Epoxy Painted Sheet Steel Enclosed Front Open Fully Panel For Fully Automatic Cum Manual Control Centre For Operation Of The Pump Motor In Star-Delta Mode Ranging From 7.5 Hp To 12.5 Hp, Actuator With Dol Starter, Chlorinator With Dol Starter And Timer Operated Outdoor And Indoor Lighting And Also Spares Feeder As Per Approved Drawingand Nit Specification. 6 Supply And Delivery Of The Following Valves, Pipes, Gauges Etc. At Site. 7 80 Mm Dia M.S. Seamless Column Pipe ( Black ) 6.8 Mm To 7.1 Mm Thick With 150 Mm Long Heavy Type Socket At One End. 8 3.00 Mtr. Long Excluding Socket Having 8 T.P.I. Thread. 9 1.5 Mtr. Long Excluding Socket One End Having A Thread Of 11 T.P.I. & The Other End Having A Thread Of 8 T.P.I. 10 Heavy Type Suitabledia Ms Suspension Clamp Along With Nuts Bolts And Washer. 11 Cast Iron Wafer Type Three Phase Actuator ( Rotork Range, Three Phase 415 V, Multiturn Electrically Actuated ) Operated Butterfly Valve Of Dia 80Mm ( P.N-1.0 ) As Per ( Is-13095 Ip-68 ) Test Certificates From Both The Manufacturer Are To Be Submitted At The Time Of Delivery 12 80Mm Dia Cidf Sluice Valve-1 No., Non Return Valve-1 No., Cidf 90° Bend-1No., Ci Flanged Tee-1No. Blank Flange-1No., Ci / Ms Flanged Short Piece 0.50 Mtr.-1 No, Ci / Ms Flanged Pipe 1 Mtr.-1 No. Etc As Per Is Specification And Certification For Construction Of Delivery Pipe Line And Wash Out Line. 13 Heavy Type 250 Mm Dia Split Type Tube Well Cover With 12 Mm Thick Clamping Arrangement Including Holes Of Column Pipe, Air Pipe And Cable Entry With 2 Sets Heavy Type Suspension Clump, Nuts, Bolts And Washer As Per Departmental Design. 14 Depth Gauge 100Mm Dia With Steel Air Pipe Of Required Length With All Accessories For The Above Work Including Supply Of Good Quality Hand Pump. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 15 Pressure Gauge ( H.Guru / Febig ) 150Mm Dia ( 0-7Kg / Sq.Cm ) Brass Cock And Fitting Complete. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 16 50 Mm. Dia. Non Metalic Pipes ( Is:14930 ) And Specials For Protection Of Submersible Cable ( As Per Site Requirement ) 17 Anti Snapping Safety Device For Pump Set By Supplying Suitable Size Ms Clamps Two Sets And Nylon Rope Of Required Length Including Supplying Of Nuts, Bolts And All Other Materials. 18 Supply And Delivery Of 100 Amps Male Female Kit Katfuse Unit 19 100 Amp 415 V Rewireable Type Tpn Main Switch. 20 Laying Of 25 Sq. Mm. 3.5 Core Al. Ar. Cable In Wall / Floor By Supplying Of All Necessary Materials As Per Ie Rules And As Per Direction 21 Installation Of The Materials ( To Be Supplied Under Above Sl No 1.01 To 3.11 ) Such As Pump Motor Set With Column Pipes, Valves, Panel, Fiting Fixing Pressure Gauge, Depth Gauge, Non-Return Valve & Drawing Delivery Out-Let & Washout Line With The Supplied Specials / Accessories By Providing Antisnapping Cage Of Suitable Size Including Supply Of Cable Gland, Sockets Etc Including Brick, Sand, Cement Rod Etc As Required To Complete The Job As Per Direction And Up To The Entire Satisfaction Of The Eic. 22 Making Brick Pillar 0.25 Mtr X 0.25 Mtr. For Supporting Of Valves And Pipes With 12 Mm Thick Plaster And Net Cement Finish Complete. 23 Supply, Delivery Of M.S Kiosk Box Of 661Mm X 559 Mm ( Lxw ) Size Having Thickness Of 1.5 Mm With Angle Support At Four Legs Having Hight Of 661 Mm With Provision Of Locking Arrangement, Supply Of Lock, Cable Entry Point Incl Painting By One Coat Of Black Paint Over One Coat Of Primer All Complete. 24 Making Suitable Size Pump Foundation Including Erection Of Kiosk Box With Supplying Of Necessary Cement, Sand And Stone Chips Including Plastering And Net Cement Finish Complete. 25 Making Double Earthing Arrangement In Compliance With Ie Rules By G.I. Pipe Electrode Of 50 Mm. Dia 3 Mtr. Long 2 Nos For Panel And Pumping Machinery 25 Mm. X 6 Mm. G.I. Earth Strips From Earth Pit To Panel And All Other Accessories Required To Complete The Work. 26 Making Internal Electrification Of Pump House Consisting Of Two Bracket Point, One Tube Light Point, Two Bulk Head Point, One Fan Point And 1 No. 74 Watt Led Fixture With Arm Bracket At Outside And One Three Pin Plug Point Including Supply Of All Necessary Materials To Complete The Work As Per Ie Rules And As Per Direction ( All The Fittings And Lamp Should Be Led Type As Per Choice Of Eic ) 27 Supply And Delivery Ofpvc Moulded Chair. 28 Supply And Delivery Of Pvc Moulded Table. 29 Supply, Delivery & Installation Of The Following Fan As Directed By Eic.Ceiling Fan 1200Mm Sweep Including Fan Clamp As And When Required. 30 Supply And Delivery At Site Of 15 Kva, 3 Phase Oil Cooledtype Servo Motor Operated Copper Wound Line Voltage Corrector Conforming To Is-9815 ( Pt.-1 ) -1994 Suitable For Un-Balanced Input Voltage Phase To Phase 200V.-500V Including First Filling Oil As Per Is-335 Where Applicable As Per Approved Drawingand Nit Specification. 31 Supply And Delivery Of Following Materials At Site: 32 100 Amps, 415 V, 4 Pole On Load Change Over Switch. 33 100 Amps, 415 V Tpn Rewireable Type Mainswitch. 34 100 Amps Bus-Bar Chamber Having 4 Nos. Al. Bus-Bar. 35 1.1 Kv Grade 415 V, 25 Sqmm, 3.5 Core Pvc Insulated 1.1 Kvaluminiumarmoured Cable. 36 Making Brick Built Foundation With Supplying Of All Required Materials Suitable For The Above Voltage Stabilizer By ( 4:1 ) Cement Mortar Including Holding Down Foundation Bolts And 12 Mm Thick Plaster With Neat Cement Finish, Sloping All Complete As Per Direction Of Eic. 37 Fitting , Fixing Of Change Over Switch, Busbar Chamber And Main Switch As Mentioned In Item No. 15.01, 15.02 And 15.03 On The Iron Angle Frame Of Suitable Size Fixed At Suitable Position On Wall By Supplying All Necessary Fixing Materials All Complete As Per Direction Of Eic. 38 Installation Of The Above Voltage Stabilizer As In Item No.14.00 On The Foundation Including Making All Connection Complete As Per Direction. 39 Drawing And Connection Of Cable As In Item No. 15.04 On Wall / Surface From Change Over To Panel Via Voltage Stabilizer, Bus Bar And Main Switch Incl. S & Fitting-Fixing Of Required Nos. Of Ms Saddles With Earthing Attachment In 10 Swg Gi ( Hot Dip ) Wire, Making Holes Etc. As Necy. Mending Good Damages And Painting. 40 Making Joints Of The Cable By Supplying Compresion Type Gland Thimple, Socket Etc. As Per Requirement And As Per Direction Of Eic. 41 Double Earthing The Whole Installations Complying With Ir Rules Including Supplying Of All Necessary Earthing Materilas For Voltage Corrector Device To Complete The Job As Per Direction Of Eic. 42 Supply & Delivery Of Automatically Controlleddiaphargm Type Chlorinator For Accurate Dosing Of Chlorine Solution Into The Waterby Connecting Metering Pump ( Diaphargm Type ) Having Following Specification:- Pump Type ::Diaphargmliquid ::Chlorine Solutioncapacity ( Lph ) :: 0-100Pressure Kg / Cm2 ( Testing ) :: 10Pressure Kg / Cm2 ( Suction ) :: Floodedpressure Kg / Cm2 ( Hydro ) :: 15Connection Suction :: ½” Hose Holderconnection Discharge :: ½: Hose Holdermoc Liquid End :: Ppdiaphragm :: Ptfenrv :: Ppdrive Capacity :: 0.5Hp, 3 Phase, 50Hz, 415V, 1440 Rpmmotorcoupling Capacity :: Flexible Spiderstrainer :: Y Type, Pp, ½” Bsp ( F ) Pressure Relief Valve :: Inbuilt.Solution Tank :: 100 Ltr Capacity ( Including Making Provision For Inlet Line To The Actual Storage Tank Of Dosing Solution Of All Materials. Test & Warrantycertificatesare To Be Submitted At The Time Of Delivery 43 Installation Of Above Supplied Chlorinator With All Accessories, Pvc Tankand Drawing Of Power Line As Per Ie Rules By Supplying Pvccopper Wire & Continuous Earthing. This Includes The Cost Of All Necessary Cc Foundation ( At Least 200Mm Height ) With Concrete Mixture ( Sand, Cement, Stone ) And Neat Cement Finish By Supplying Of All Required Materials And Testing The Entire Set As Perentire Satisfaction Of The Eic. ( Power Will Be Fed From Plc Panel Of Pumping Machinery ) 44 Commissioning Of The Installation With Full Satisfaction Of Eic And Trial Opearation, Maintenance, Guarding Of The Installation Round The Clock For A Period Of 90 ( Ninety ) Days From The Date Of Receipt Of Service Connection By Engaging Personnel Having Sufficient Experience In Electrical Installation. 45 Make As Per Departmental Approved Vendor List Circulated Vide Memo No.Phe / Iv / 2277 / W-181 / 19 Dated- 25 / 09 / 2019

BRR:7524278 Provision Of 5 Mtr. Poles With Fitting At Sukhdev Park Lajpat Nagar-I In Ward No. 57-S Under Central Zone. - Earthing With G.I. Earth Pipe 4.5 Metre Long, 40 Mm Diaincluding Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 2 Providing And Laying Earth Connection From Earth Electrode With 6 Swg Dia G.I. Wire In 15 Mm Dia G.I. Pipe From Earth Electrode Including Connection With G.I. Thimble Excavation And Re-Filling As Required. 3 Providing And Fixing 6 Swg Dia Gi Wire On Surface Or In Recess For Loop Earthing Along With Existing Surface / Recessed Conduit / Submain Wiring / Cable As Required. 4 Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Masonry Open Duct As Required. Up To 35 Sqmm 5 Laying Of One Number Pvc Insulated And Pvc Sheathed / Xlpe Power Cable Of 1.1 Kv Grade Of Following Size In The Existing Rcc / Hume / Metal Pipe As Required. Up To 35 Sqmm 6 Supplying & Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required . ( A ) 3X2.5 Sqmm 7 S / L Of Following Size Dwc Hdpe Pipe Isi Marked Along With All Accessories Like Socket , Bend , Couplers Etc.Conforming To Is 14930 , Part Ii Complete With Fitting And Cutting , Jointing Etc .Direct In Ground ( 75 Cm Below Ground Level ) Including Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc, Complete As Required ( A ) 63Mm Dia ( Od-63Mm Id -51Mm Nominal ) . 8 Fabrication, Supplying & Erection Of Following Size Flange Mounted Hot Dip Galvanized Octagonal Pole Made From Ht Steel Plate Window With Flash Cover With Full Vertical Window Cover At Appropriate Hight From The Base Plate On Existing Cement Concrete Pedestal As Required I / E Supplying And Fixing Of 6 Mm Thick Laminated Mounted Sheet Inside The Window Mounted On And I / C Providing And Welding 3 Nos. G.I Strips 4 Mm Thick Of Suitable Length And Having Suitable Size Tapped Hole As Reqd., Terminal Block Suitable For 25 Sqmm Conductor-4 Nos & Shorting Links On Din Channels I / C P & F Din Channel Of Suitable Lenth, 6 Amps Sp Mcb C Characteristics, Earth Stud, Cable Support Clamp Suitable For For 4X25 Sqmm Cable. Logo / Name Of Manufacturer Shall Be Embossed On The Pole. Galvanization As Per Relevant Is. ( A ) 5.0 Mtr. Height, 3 Mm Thick, Bottom Dia Of 130 Mm & Top Dia Of 70 Mm, Base Plate Of Size 225 Mm X 225 Mm X 12 Mm Thick. 9 Providing And Laying In Position M25 Grade Reinfoced Cement Concrete Foundation Of Size450 Mm ( L ) X450mm Wide And 1000 Deep I / C Excavation Of Earh, Providing Cutting, Bending And Placing In Position, Reinforcement Of Cold Twisted Bars Of 12Mm Dia- 960 Mm Long ( Approx ) -8 Nos And Reinforcement Of Cold Twister Bar Of 8 Mm Dia1400mm ( Approx ) - 6 Nos ( With150 Mm Spacing ) As Required With Supplying And Positioning Of 4 Nos. Foundation Bolts Of Size 16Mm Dia, 600 Mm Long, J Type I / C 2 Nos. Template Anchor Plates Of Size 225X225x3mm And Providingdcw Hdpe Pipe For Cable Entry & Exit As Required For 3 Mtr And 5 Mtr Pole. 10 Fabrication, Supplying & Fixing Class B Galvanised Single Overhang Arm Bracket Made Out Of 250 Mm Long Galvanized Top Tube With Cap And 1000 Mm Long 32 Mm Dia Galvanized Pipe With Tightening Bolts Complete As Reqd. 11 Providing And Laying I / C Hdpe Pipe Of 40 Mm Outer Dia With Pn Rating 4 By Hand Molling / Manual Method Conforming To Is 4984 12 Dismantling Of Pole / Street Light Standard / Strut Embedded In Cement Concrete Foundation Etc. As Required. 13 Supply Of Xlpe Insulated And Pvc Sheathed Al. Conductor Armored Cable 1.1 Kv Grade Conforming To Is 7098 Of 2X6 Sqmm As Reqd.

BRR:7524203 Provision Of Lighting Poles (With Fittings) In Various Blocks Of New Friends Colony In Ward No. 187 (Sarita Vihar) Under Central Zone

BRR:7523970 Supply And Installation Of 39 Nos (7 Mtr Swagged Steel Tubular Pole And 1 No 100 Watt Led Flood Light Fittinge) Street Light At Ghatakpukur Bazar To Taleb Molla House, M- Gobindapur, Gp- Jagulgachhi

BRR:7523969 Supply And Installation Of 39 Nos (7 Mtr Swagged Steel Tubular Pole And 1 No 100 Watt Led Flood Light Fittinge) Street Light At Bhangar Bazar, M-Gobindapur, Gp-Jagulgachhi

BRR:7523966 Supply And Installation Of 39 Nos (7 Mtr Swagged Steel Tubular Pole And 1 No 100 Watt Led Flood Light Fittinge) Street Light At Bhangar Collage Bridge To Taleb Molla House, M- Gobindapur, Gp- Jagulgachhi

BRR:7523952 Installation Of 6 No. Solar Street Light At Ward No. 50, Ps No.-19 At Mouza Banipur, Gp-Banipur-Ii Under Sankrail Panchayat Samity Under 15Th Fc-25-26 (Activity Code-112819735)

BRR:7523893 Construction Of Children Park And Installation Of Solar Light At Sangsad Xx Active Code-109935413/25-26

BRR:7523887 Construction Of Children Park And Installation Of Solar Light At Sangsad X Active Code-109945188/25-26

BRR:7523740 Installation Of 10 Nos Solar Street Light At Balidapukur Under Kaniara-I Gp Of Bagdah Block

BRR:7523534 Tender For Supply And Erecting Of 16 Mtr Higt Mast Solar Light At Mambakkam Panchayat In Olakkur Block- Package 01

BRR:7522860 Bids Are Invited For Custom Bid for Services - Hiring of Heavy Duty Tug 40T Bollard Pull for Docking Undocking Shifting CST Mooring Berthing and other misc works of Yard 3022 Non It Professional Service (Version 2) Total Quantity :

BRR:7522531 Tender For Annual Rate Call For Tent For Rent - Tent Size 15x15 Feet complete 2 Water Proof Tent 3 Stage Parda 4 Green Carpet 5 Flower Printed Carpet 6 ChairFSize 7 Chair VIP 8 Welcome Gate Small 9 Welcome Gate Big 10 Net Jaali 11 Stage Complete 12 Dari 13 Rajai 14 Takiya 15 Gadi 16 White Chadar 17 Kanat 18 Sofa 3 Seater 19 Sofa 5 Seater 20 Stage Chadav 21 Table 22 Table Long 23 Table Chadar 24 Table Jhalar 25 Table Cloth 26 Takhat Big 27 Stand Fan Normal size 28 Stand Fan Big size 29 Tent Coolor 30 Coolor Normal size 31 LED Big For Live Telecast with All Required Equipment 8x8 Sq FT or Above Size 32 Decorative Series Light Length 5 mtrs. (unit per day) 33 Balli 10 Feet or above . 34 Coconut Rope (Rassi) 35 Sutali

BRR:7521695 Bids Are Invited For Repair Of Existing Hydraulic Bollards Sta-4 , Camera For Cctv System (V3) Total Quantity : 1

BRR:7521694 Bids Are Invited For As Per Bid Concrete Case Ground , Synthetic Surface On Concrete Base 10 Layer System , Basketball Pole , Flood Light , Chain Link Fencing , Scoring Board Laying Of Basketball Court With Synthetic Surface, Fiber Glass , Basketball Ring Total Quantity : 16492

BRR:7521226 Bids Are Invited For Sub Assy Ball And Socket Joint , Assy 3 8 Hose W Bulk Head , Trip E Speedometer Ratio , Assy Door Handle Outer , Tail Lamp Assy Lh , Tail Lamp Assy Rh , Brush Carrier Assy , Pump Switch 12V , Pole Screw , Speedocable 4300 Mm Sub Assy Ball And Socket Joint For Army Bus, Assy 3-8 Hose W Bulk Head For Tata 2.5 Ton, Trip E Speedometer Ration For Tata 10 Ton, Assy Door , Utility Vehicle Total Quantity : 11

BRR:7521208 Bids Are Invited For Led Lazorin Bollard Light 36 Watt Led Lazorin Bollard Light High 1000 Mm , Eleluke 40 Watt Led Bollard 1120 Mm , Humberto Pole With 60 Watt Led Quince Post Top Fixture 3 Mtr , 3Mtr Pole With 40 Watt Led Light And 157 No Holes , Rain Jacket With Integrated Hood And Trouser Large Jacket Large , Blocking Bollard (Mha) Rain Suit Total Quantity : 136

BRR:7520976 Bids Are Invited For Solar Lamps (Solar Home Lighting System With Batten Type Luminary) (Q3) Total Quantity : 14

BRR:7520751 Bids Are Invited For Mt0012 Assy Clutch Master Cyl 23 81Dia , Wheel Cyl With Citradelip 44 45 Mm Dia , Fan Belt Engine , Mounting Engine Front , Hinge Rear Gate , Tank Coolant Vehicular , Rep Kit Air Dryer Assy , Change Over Switch , Air Pressure Pipe , Passenger Driver Fan 24V , Assy Combination Switch , Trailer Control Valve , Speedo Cable 3 2Mm Dia 3000Mm Long , Dome Light , Key To Ignition Box Assy Clutch Master Cyl 23 81 Dia Tata 2.5 Ton, Wheel Cyl With Ci Tradelip 44 45Mm Dia Tata Fat 1210 Sd, Fan Belt Enging Tata Fat 1210 Sd, Mounting Engine Front Maruti Gypsy, Hinge Rear Gate Maruti Gypsy, Tank Coolant Vehicular Tata 2.5 Ton, Rep Kit Air Dryer Assy Tata Fat 1210 Sd, Change Over Switch , Toggle Switches Total Quantity : 20

BRR:7520732 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) ((3 3 )) 1 Lakh (S) Total Quantity : 140

BRR:7520682 Bids Are invited for Wire 2 Point 5 Mm - As Per Boq , Wire 1 Point 5 Mm - As Per Boq , Nails 3 Inch - As Per Boq , Wooden Board 18 Mm - As Per Boq , Sunmica - As Per Boq , Bnc Converter - As Per Boq , Hdmi To Audio Video Connector - As Per Boq , Hdmi Cable 15 Mtr - As Per Boq , Hdmi Cable 20 Mtr - As Per Boq , Colour Ink - As Per Boq , Focus Light - As Per Boq , Hp External Usb Dvd Rw Drive - As Per Boq , Binding Wire - As Per Boq , Crimping Tool - As Per Boq , Flood Light - As Per Boq , Transparent Sheet Roll - As Per Boq , Cpu Box - As Per Boq , Rechargeable Mosquito Rocket - As Per Boq , Wiper Blades - As Per Boq , Ambulance Clutch Pipe - As Per Boq , Hose Pipes - As Per Boq , Gypsy Gas Filling With Pipe - As Per Boq , Gypsy Fan Belt With Fan - As Per Boq , Jhumar Bulb - As Per Boq Total Quantity : 405

BRR:7520633 Bids Are Invited For Spares Regulator Sr 40 , Speedometer Cable , Acc Cable , Commander Light , Handle Door Lh , Wiper Blade Gypsy , Wiper Blade , Reverse Light Switch , Light Assy Indicator , Air Filter New , Kit Unloader Valve Regulator Sr 40, Speedometer Cable, Acc Cable, , Spares Tyre For Tyre Coupling Total Quantity : 43

BRR:7520333 Supply Installation Testing Commissioning Of Led Street Light Poles At Rashid Compound, Devripada, Srilanka, Adivasi Pada, Jubli Park And Charni Pada Area Under Diva Ward Committee.

BRR:7520331 Tender For Supply, Installation, Testing, Commissioning Of Led Street Light Poles At Bypass Toll Naka Road Under Diva Ward Committee.

BRR:7520315 Supply Of Various Type Material At Village Pangri Ugale Tq Sindkhed Raja Dist Buldhana , Name Of Items : , All In One Lager Printer , 25Lph Ro , 18 W Light , Solar Light , 24 W Light , 36 W Led Light , 1 Meter Wire 1Mm , Holder (1 Nos) , Clamp And Pipe Set , Tcl Power 25 Kg Bag , Weighing Scale 100Kg And Above , Hight Chart , Infrentometer , Stadiometer With Weighing Scale , Weighing Scale For Baby , Aakar Khelni Sanch 0 Te 5Yr With Chart , Anganwadi Karita Kothi 100 Kg , Anganwadi Karita Kothi 50 Kg , Kapat 4X3 Size , Kapat 7X3 Size , Kukar 10Kg , Kukar 25Kg , Palte Pavbhaji , Water Glass Ss , Table 2X4 Size , Khurchi Nilkamal Plastice , Hand Wash Station 1 Besin , Hand Wash Station 4 Besin , Led Smart Tv 32 , Led Smart Tv 40 , Led Smart Tv 50 , Cricket Set (2 Bat , 6 Ball, 2 Pair Stamp, Hand Glos 3 Pair, Pad 3 Pair , Helmet 3 Pair) , Sound System Withmick And Trolly (10) , Foot Ball , Pen Drive 64 , Medical Kit (Oximter, Turmameter, Bandez, Iodine,Cipladim) , B P Aprates (Isi Mark) , Saniterypad (6 Nos Set) , Suger Test Kit (Isi Mark) , Bebi Powder (Jonsun Baby) , Bebi Powder (Himalay) , Machardani For 0 Te 1 Yr Baby , Tharmameter , Preganews Kit , Kadahi 10Kg , Bhagune 10Kg , Baket 10Ltr , Topale 5 Kg , Bhat Wadi , Vaghral , Kavcha , Mat 12X20 Size , Mat 6X10 Size , Computer Set (500Gb Hhd,4Gb Ram, I3 Processer With Keybord Mouse, Vga And Power Supply) 1 Year Warranty , Moniter 22 , Moniter 15 , Laptop (1Tb Hhd,4Gb Ram, I3 Processer) 1 Year Warranty , Small Tractor For Rent Per Day With Fawarni Yantra With Driver , Deltafog 1 Ltr , Deskbench Small Size 1 To 5 Year Childern , Babay Chire 40X32x30x20 Size , Slide 58X18x36x54 Size , Super Swing 30X33x43 , Book For Laburary (1 Set Samaj Sudharak Yanche 5 Book, Bharat History 1Book, Othe R4 Book ) 10 Book Set , Water Jar 18 Ltr , Handicap Wheel Chire (For Handicap) , Balnket , Handicap Walker , Ciling Fan , Childer Dress 1 Yr , Childer Dress 2 Yr , Childer Dress 3 Yr , Childer Dress 4 Yr , Childer Dress 5 Yr , Wheel Chare

BRR:7520280 Providing And Fixing Of Electric Led Light Poles At New Vadavli Mhatre Ground In Ward No 1 Within Kbmc Premises

BRR:7520278 Providing And Fixing Of Light Poles In Eranjad And Sonivali Areas In Ward No 3 In Kbmcarea

BRR:7520277 Fixing Of Light Poles From Mohan Willows To Aditi Villa In Shirgaon In Kbmc Area

BRR:7520199 Tender For Electrification Work At Panjrapur Garage Under Executive Engineer (Transport) Wssd- 1 Removal of fixtures / fittings / ceiling fans / bulkhead / street light / gyeser etc. 2 Submains FRLSH Casing N Caping - 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire in 20 x 12 mm (1/2 in) 3 Light /Fan / Ex. fan Points with Modular switches & FRLSH wires 4 Outdoor LED Street Light fittings – 100-120 W 5 1x28W, T-5 Fixtures, comprises of M.S.Powder coated with end cap. The fixtures complete with high efficiency electronic ballast and PF= 0.98 complete with bright reflector & T-5 lamp 6 15 / 5 A / 6 A Combined Power Plug Socket Point with Fuse and Indicating Lamp, One 15 Amp SP Switch 7 3/5 Pin Independent Plug (IP) with Modular switches & FRLSH wires 8 Ceiling fan of 1200 mm sweep with all accessories including Electronic Regulator for completing installation 9 Exhaust fan of 305 mm sweep,900/1400RPM, with 750 CFM free air delivery, AC 230V/415V , 50 Hz, single phase / three phase complete with all necessary accessories for completing installation . 10 Pedestal fan of 400mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with guard and regulator 3 mtrs. of 3 core 1.5sqmm, PVC insulated , copper conductor , flexible wire and Hand shield type 3 pin plug top. 11 Wall mounting air circulator of 450mm sweep, 230 Volts,AC 50 Hz, oscillating type complete with all necessary accessories for completing installation.

BRR:7520185 Repairing, Replacing ,Erection And Commissioning Of Various Electricals Accessories Which Damaged At Kharda Barrage Project Tq Deoli Dist Wardha.-1 Supplying, erecting, testing and commissioning of microprocessor based AMF panel suitable for diesel generating set of above 25 kVA up to 35 kVA capacity Three phase, 415 Volts, 50Hz A.C. with all standard features, safeties etc as per specification no. GEN-AMF. 2 Supplying, installing, testing and commissioning C-10 battery with capacity of 12V, 150 Ah with duty cycle 10-12 hrs. suitable to charge on PV cell with necessary wiring connections, nut bolts on provided stand with five years warranty as per specification no. ESD-SL/BAT 3 Supplying & erecting four pole ON LOAD change over switch, 415V, 400A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. 4 Providing earthing with copper earth plate size 30 x 30 x 0.315 cm complete with all materials, testing & recording the results as per specification no. EA-EP 5 Providing & erecting 3 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 6 Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC 7 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing, having system lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of 140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification No FG-ODF/FLS2 8 Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 9 Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT 10 Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2. 11 Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel, concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole) 12 Providing pipe type earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rod complete with all materials testing and recording the results as per specification no. EA-EP 13 Providing & erecting hot dipped galvanised ladder type cable tray manufactured from 16 SWG (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware. 14 Providing & erecting hot dipped galvanised cover suitable for perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mm height complete with necessary hardware. 15 Making trench in soft soil having 0.75 m depth and minimum 0.3 m width for laying provided cables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR 16 Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete. 17 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 90 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. 18 Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 19 Supplying & erecting LED type indicating pilot lamp with LED colours red / yellow / green, 230 / 250V on provided box / panel with necessary material, wiring & connections etc 20 Supplying & erecting LED type indicating pilot lamp with LED colour blue, 230 / 250 V on provided box / panel with necessary material, wiring & connections etc. 21 Supplying and erecting self-locking arrangement with keys in duplicate, made of brass of grade 1 compliance to IS 729-1979 duly erected, flush with surface of panel / cupboard 22 Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for up to 250A MCCB 23 Supplying, installation and testing of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete, and recording the results Specification no. EA-MOBI 24 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 25 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 25 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 26 Supplying & erecting Fully Automatic Star/delta starter suitable for 12.5 H.P to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. 27 Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EA-EP. 28 Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete. (pole muffing or any other purpose) 29 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 10 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 30 Supplying & erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mm thick complete on pole/wall as per specification No. CB-SB 31 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 32 Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 33 Supplying & erecting G.I. pipe ‘A’ class 75 mm dia. erected for enclosing XLPE armoured cable on wall/pole as per specification no. CB-CE 34 Providing & erecting 3 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact. MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 35 Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 36 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 16 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 37 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing, having system lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of 140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification No FG-ODF/FLS2 38 Supplying and erecting outdoor stand mounted feeder pillar for high-mast of the same manufacturer with 32A TPN MCB incomer, 24hr astronomical time switch with minimum 5 years battery backup, IP 54 and IK10 protection, 25 A TP contactor for automatic switching of luminaires, 2 no. 9A contactors and raise/lower push button, and provision for termination of adequate size of incoming and outgoing cables complete erected in min. 14 SWG CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation complete 39 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core 300 sq. mm. aluminium conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 40 Providing and erecting Heat shrinkable out door termination kit for 11 kV ( E ) XLPE HT cable 3x240 to 300 sq. mm. with necessary material as per specification no. CB-JT/HT

BRR:7519881 Installation Of Solar Street Light From The House Of Ajit Mondal To The House Of Sasthicharan Das At Gobindatola In Gs No- V Under Kuthirampur Gram Panchaya (15Th Cfc)

BRR:7519880 Installation Of Solar Street Light From Puratan Nowdapara Jumma Masjid To Jalaluddin House In Gs No- Ix Under Kuthirampur Gram Panchayat (15Th Cfc)

BRR:7519879 Installation Of Solar Street Light From The House Of Swapan Das To The House Of Milon Das At Kalitalapara In Gs No- Ii Under Kuthirampur Gram Panchayat (5Th Sfc)

BRR:7519596 Maintenance Of Electrical Installation Govt Rb At Chandigarh (Providing Addition Bollard Fitting Etc In House No. 51, Sector 5, Chandigarh).

BRR:7518646 Supply And Erecting Street Light Pole And Lt Cable From Square To Kholeshwar Mandir Road And Petrol Pump To Main Chowk At Main Road Divider At Barshitakli Dist Akola

BRR:7518645 Supply And Maintenance Of Electrical Material And Appliance For Electrification Mc Office, Hospital, Schools, Garden, Buildings And Other Places , Tube Rod 4 36/40 Watt (Bajaj) , Electronic Chock 40 Watt , Pliar (Taparia) , Tester (Taparia) , Wire Cutter , Screw Driver Standard With × And - Head , Handgloves (Electrical) , Brass Point Kit-Kat 16 Amp (Anchor) , Brass Point Kit-Kat 32 Amp (Anchor) , Brass Point Kit-Kat 63 Amp (Anchor) , Brass Point Kit-Kat 100 Amp(Anchor) , Isolator 40A , Isolator 63A , Power Plug With Switch 16 Amp, 5 Pin Socket With Indicator , Electronic Fan Regulator (Anchor) , Electric School Bell 10 , Electric Office Bell Ding-Dong , Cordless Electronic Bell (Isi Mark) , Bell Push Lock Type (Isi Mark) , Led Lamp 3 Watt , Led Lamp 5 Watt , Led Lamp 7 Watt , Led Lamp 9 Watt , Led Lamp 12 Watt , Led Lamp 18 Watt , Led Lamp 23 Watt , Led Concealed Light 3W , Led Concealed Light 5W , Led Concealed Light 7W , Led Concealed Light 10W , Led Concealed Light 12W , Led Concealed Light 14W , Led Concealed Light 16W , Led Batten Light 20-22 W , Retrofit Led Tubelight 20-24 Watt , Retrofit Led Tubelight 28 Watt , Retrofit Led Tubelight 40 Watt , Bulkhead Led Light 10 Watt , Pvc Pipe Heavy Duty 3/4 1 , Pvc L-Bow 3/4 1(Cello, Modi) , Pvc T 3/4 1(Cello, Modi) , Pvc Bend 3/4 1 (Cello, Modi) , Pvcsaddle /Clip 20 To 25 Mm , Gi Saddle 25Mm , Cableclip 6Mm , Cableclip 10Mm , Cableclip 16Mm , Cableclip 20Mm , Casing Clip , Pvc Junction Box One-Way 3/4 1 (Cello, Modi) , Pvc Junction Box Two-Way 3/4 1 (Cello, Modi) , Pvc Junction Box Three-Way3/41(Cello, Modi) , Pvc Junction Box Four-Way 3/4 1 (Cello,Modi) , Casing-Capping Heavy Duty 1/2 1 (Cello,Modi) , Casing-Capping Capling 1/2 1(Cello, Modi) , Casing-Capping T 1/2 1 (Cello, Modi) , Casing-Capping L-Bow 1/2 1(Cello, Modi) , Casing-Capping Corner 1/2 1(Cello, Modi) , Sanmica Board 12X15 , Sanmica Board 10X12 , Sanmica Board 8X10 , Samica Board 6X8 , Sanmica Board 4X7 , Sanmica Board 4X4 , Wooden Board 12X15 , Pvc Board4x4 (Cello, Modi) , Pvc Board 4X6(Cello, Modi) , Pvc Board 4X8(Cello, Modi) , Pvc Board 6X8(Cello, Modi) , Pvc Board 8X10(Cello, Modi) , Pvc Board 12X16 (Cello, Modi) , Modular Surface Switchboard 2 Module , Modular Surface Switchboard 4 Module , Modular Surface Switchboard 6 Module , Modular Surface Switchboard8 Module , Modular Surface Switchboard 12 Module , Modular Surface Switchboard 18 Module , Modular Electronic Ceiling Fan Regulator , Modular Switch 6A , Modular Switch 16A , Modular Dp Switch 32 A , Modular Socket 6 A , Modular Socket 16 A , Modular Single Phase Motor/Ac Starter 25A , Modular Mcb 16 A , Modular Mcb 25 A , Wooden Gitti , Screw 1 Inch , Screw 1.5 Inch , Screw 2 Inch , Screw 3 Inch , G.I. Earthing Wire , G.I. Earthing Plate 60×60×0.6 Cm , Earthing Pipe 40 Mm Dia , Nut-Bolt Set , Insulation Tape 3/4 X 5 Mtr. (Isi Mark) , Piano Switch 5 A , Piano Switch 16 A , Pendant Switch , 5 Pin Socket5 Amp (Cello,Anchor ) , Ceilling Rose (Cello, Modi) , Angal Holder (Cello, Modi) , Button Holder (Anchor) , 2 Pin Top 6A , 3 Pin Top 6A , 3 Pin Top 16A , Plastic Wall Plug 6Mm , Wires & Cables , Pvccu. Wire Multistand 1Sq Mm , Pvccu. Wire Multistand 1.5 Sq Mm , Pvccu. Wire Multistand2.5 Sq Mm , Pvccu. Wire Multistand 4 Sq Mm , Pvc Copper 3 Core 1.5 Sq.Mm Cable , Pvc Copper 3 Core 2.5 Sq.Mm Cable , Pvc Copper 3 Core 4 Sq.Mm Cable , Pvc Copper 3 Core 6 Sq.Mm Cable , Pvc Copper 3 Core 10 Sq.Mm Cable , Service Wire 4Mm(Isi Mark) , Service Wire 6Mm (Isi Mark) , Service Wire 10Mm (Isi Mark) , Mcb ,Rcbo & Mccb , Spmcb 10 Amp , Spmcb 16 Amp , Spmcb 25 Amp , Spmcb 32 Amp , Spmcb 40 Amp , Spmcb 63 Amp , Dpmcb 10 Amp , Dpmcb 16 Amp , Dpmcb 20 Amp , Dpmcb 32 Amp , Dpmcb 40 Amp , Dpmcb 63 Amp , Tpmcb 32 Amp , Tpmcb 40 Amp , Tpmcb 63 Amp , Fpmcb 40 Amp , Fpmcb 63 Amp , 2 Pole Rcbo 40 Amp , 2 Pole Rcbo 63 Amp , 4 Pole Rcbo 40 Amp , 4 Pole Rcbo 63 Amp , 4 Pole Mccb 100 Amp , 4 Pole Mccb 125 Amp , Fitting And Point Wiring , Point Wiring In Pvc Trunking (Casing-Capping) With 1.5 Sq.Mm (2+1E) Frlsh Grade Copper Wire, Flush Type Switch, Earthing And Required Accessories As Per Specification No: Wg-Pw/Sw , Point Wiring For Light/Bell/Exhaust Fan In Pvc Trunking (Casing-Capping) With 1.5 Sq.Mm (2+1E) Frlsh Grade Copper Wire, Modular Type Switch, Earthing And Required Accessories As Per Specification No: Wg-Pw/Sw , Pvc Pipe Fitting (Single Point) , Casing-Capping Fitting , Mcb Fitting , Power Plug 15 Amp Fitting , Earthing Plate Complete Fitting , Tube Light Complete Fitting. , Celling/Wall Fan Set Fitting , Fan Regulator Fitting With Wiring , Elecrical Bell Fitting , Fans ,Cooler & Ups , Celling Fan 1200 Mm. , Bldc Celling Fan 28Watt 1200 Mm. , Celling Fan 1400 Mm. , Anchot Bolt For Ceiling Fan , Wall Fan 400 Mm(Crompton, Bajaj ) , Exhuast Fan 300 Mm(Crompton, Bajaj ) , Exhuast Fan 380 Mm(Crompton, Bajaj ) , Fresh Air Fan 225 Mm(Crompton, Bajaj ) , Desert Cooler 5 Feet , Desert Cooler 4 Feet , Desert Cooler 3 Feet , Iron Work With Fabriccation In Kg. , Iron Sheet Fabrication Work Of 1.6 Mm In Kg. , Extention Box Strip 4 Pin Socket (Isi Mark) , Ups 230V. Ac 1/P, 800Va/360 Watt Capacity (Isi Mark) , G.I Pipe A Grade 25 Mm (Isi Mark) , G.I Pipe A Grade 40 Mm (Isi Mark) , G.I Pipe A Grade 50 Mm (Isi Mark) , Pipe (Hdpe)5O Mm (Isi Mark) , Street Light Box , Terminal Box 1.6 Mm (16 Guage) Crca Sheet Of Size 200 X150x150 Mm. (Isi Mark) , Terminal Box 1.6 Mm (16 Guage) Crca Sheet Of Size 200 X150x150 Mm. (Isi Mark) , Terminal Box Cast Iron Of Size 200X150 X150 Mm. , Terminal Box Cast Iron Of Size 200X150 X150 Mm. , Frp Box Of Size 250X250x100 Mm (Isi Mark) , Frp Box Of Size 150X125x100 Mm (Isi Mark) , Automatic Street Panel 6 Kw Capacity With 24 Hours Timer , Iron Flat 1 1/4X 6 Mm Clamp With Nut-Bolt. For Street Light , Round Pole Clamp. , Cement (R.C.C) Pole Clamp. , Rail Pole Clamp , Gi Bracket 40 Mm Dia , Digital Timer 24 Hours Contact Rating Up To 16A , 12 Volt 10Amp Power Supply , 12 Volt 20Amp Power Supply , Din Rail Patti , 4 Pole Contactor 9 Amp , 4 Pole Contactor 18 Amp , 4 Pole Contactor 32 Amp , Cable Lugs , Copper Lugs Up 16 Sq Mm (Isi Mark) , Copper Lugs Up 25 Sq Mm (Isi Mark) , Aluminium Lugs Up To 16 Sq Mm (Isi Mark) , Aluminium Lugs Up To 25 Sq Mm (Isi Mark) , Led Street Light And Flood Light Fitting , Outdoor Led Street Fitting 24 To 36 Watt (Isi Mark) , Outdoor Led Street Fitting 36 To 48 Watt (Isi Mark) , Outdoor Led Street Fitting 48 To 60 Watt (Isi Mark) , Outdoor Cfl Street Fitting 36 Watt (Isi Mark) , Flood Light Fitting 30 W , Flood Light Fitting 50 W , Flood Light Fitting 100 W , Flood Light Fitting 150 W , Battery , Dry Cell 1.5 V , 9 Volt Battery , 12Volt 7 Ah Smf Battery , Smf Battery12v/80Ah. , Smf Battery 12V/110Ah. , Tubular Inverter Battery 12V/100Ah , Tubular Inverter Battery 12V/150Ah , Distribution Board , Metal Mcb Box 2 Way , Metal Mcb Box 4 Way , 250 V, 4 Way 16 Amp. (Isi Mark) , 250 V, 8 Way 16 Amp. (Isi Mark) , 250 V, 16 Way 16 Amp. (Isi Mark) , 415/500 V, 24 Way 16 Amp. (Isi Mark) , 415/500 V, 32 Way 32 Amp. (Isi Mark) , Cable , Pvc Aurmod Cable 2C, 4 Sq.Mm.(Isi Mark) , Pvc Aurmod Cable 2C, 6 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 2C, 10 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 3C, 2.5 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 3C, 4 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 4C, 6 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 4C, 10 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 4C, 16 Sq.Mm. (Isi Mark) , Pvc Aurmod Cable 3^1/2C, 10 Sq.Mm.(Isi Mark) , Dwc Pipe 50 Mm Dia , Automatic Line Voltage Stabilizer,For Air Conditioner Of 1.5 Tr , Automatic Line Voltage Stabilizer,For Air Conditioner Of 2 Tr , Part-2 :- Maintenance Of Electrical Appliance. , A) Celling Fan/Wall Fan/Exuast Fan, Maintenance. , Rewinding 1200 & 1400 Mm Fan. , Bearing Replacement , Bush Replacement , Condenser.2.5 Um , 1200Mm Ceiling Fan Blade , Wall Fan New Blade , Exuast Fan New Blade , B) Cooler Maintenance. , Motor Rewinding , Bearing Replacement , Bush Replacement , Condenser. , Stud Rod , Water Tank For3 Cooler , Water Tank For4 Cooler , Water Tank For5 Cooler , Khash Wooden Plate With Fitting , Woodwool With Fitting , Regulator Replacement , Pvc 3 Core 1.5 Mm Flexible Wire , Air Diverter , Semi Exhaust New Motor 900 To 1400 Rpm , Full Exhaust New Motor 900 To 1400 Rpm , Summersible Pump For 3 Cooler , Summersible Pump For 4 Cooler , Summersible Pump For 5 Cooler , Diesel Generator Maintenance Rate(15 Kva) , Armature Winding , Starter Motor , Flywheel Gear Ring , Oil Filter , Diesel Filter , A.V.R , Service Charge , Battery Charger , Hour Meter , Battery 12V/120Ah , Air Conditioner Maintanace Rate. (For 1.5 Tr) , New Fan Motor , Fan Motor Rewinding , Thermostate , Relay , Capacitor , New Blower Motor , Compressor , Gas Charging , P.C.B. Kit , Service Charge

BRR:7518589 Supply Of Electrical Material Supply At G.P. Khadgaon , Electrical Items : , Complete Cfl Bulb (Isi) 36 Wt Crompton , Complete Cfl Bulb (Isi) 45 Wt Crompton , Complete Cfl Bulb (Isi) 65 Wt Crompton , Complete Cfl Bulb (Isi) 85 Wt Crompton , 6 Amp Switch Modular Anchor , 6 Amp Socket Modular Anchor , 16 Amp Switch Modular Anchor , 16 Amp Socket Modular Anchor , 12 Mod Plate Modular Anchor , 8 Mod Plate Modular Anchor , 6 Mod Plate Modular Anchor , Complete Cfl Bulb (Isi) 85 Wt Havells , Complete Led Street Light Fitting 30 Wat Crompton , Complete Led Street Light Fitting 45 Wat Crompton , Complete Led Street Light Fitting 60 Wat Crompton , Complete Led Street Light Fitting 25 Wat Anchor , Complete Led Street Light Fitting 45 Wat Anchor , Complete Led Street Light Fitting 30 Wat Philips , Complete Led Street Light Fitting 45 Wat Philips , Complete Led Street Light Fitting 60 Wat Philips , Complete Led Street Light Fitting 36 Wat Syska With Day-Night Sensor , Complete Led Street Light Fitting 45 Wat Syska With Day-Night Sensor , Complete Led Street Light Fitting 30 Wat Havells , Complete Led Street Light Fitting 45 Wat Havells , Complete Led Street Light Fitting 60 Wat Havells , Complete Led Street Light Fitting 85 Wat Havells , Complete Led Street Light Fitting 100 Wat Havells , Cfl Holder , Cfl Bracket Pipe , Cfl Fitting 85 Wt Br & K2k , Cfl Fitting 36 Wt Br & K2k , Clamp Cement Pole , Clamp Iron Pole , Tep Roll Steel Grip , Wire Bundle( 1/18 Aluminium ) I.S.I., Jhonson , Wire Bundle( 1.00 Copper Jhonson ) , Wire Bundle( 1.50 Copper Jhonson ) , Wire Bundle( 2.50 Copper Jhonson ) , Wire Bundle( 3.20 Copper Jhonson ) , Service Wire I.S.I., National , Service Wire 4 Mm (2 Core) National , Service Wire 6 Mm (2 Core) National , Service Wire 8 Mm (2 Core) National , Service Wire 10 Mm (2 Core) National , Service Wire 10 Mm (4 Core) National , Led Bulb 30 Watt Crompton/Orient/Bajaj , Led Bulb 40 Watt Crompton/Orient/Bajaj , Led Bulb 50 Watt Crompton/Orient/Bajaj , Led Street Light 90 Watt Crompton/Orient/Bajaj , Led Choke 30 Watt , Led Choke 36 Watt , Led Choke 50 Watt , Led Choke 60 Watt , Led Plate 30 Watt , Led Plate 36 Watt , Led Plate 50 Watt , Led Plate 60 Watt , Contractor 70 Ap 3 Phase Lnt , Contractor 100 Ap 3 Phase Lnt , Armoured Cable 35 Sq Mm24 Core Isi Mark , Armoured Cable 25 Sq Mm24 Core Isi Mark , Armoured Cable 10 Sq Mm24 Core Isi Mark , Armoured Cable 16 Sq Mm24 Core Isi Mark , High Mast Light 100 Watt Cromton , High Mast Light 150 Watt Cromton , Aaliuminium Ladder 15 Ft , Aaliuminium Ladder 20 Ft , Main Switch - 63Amp ( Ashoka ) , Main Switch - 32Amp ( Ashoka ) , Solar Light Complete , Timer , Time Switch Repairing , Contractor Reparing , Kit Kat

BRR:7518113 Installation Of 4 Nos New Cluster Of Six Solar Light Duty Tube Well And 1 Nos New Cluster Of Seven Solar Sprinkler Irrigation System Including Supply Of All Materials At Different Blocks Under Barasat Ai Division In The District Of North 24 Pgs

BRR:7517986 Installation And Setup Of Solar Lights At Ukhradihi Village Samsan, Mouza - Ukhradihi, Jl No. 85

BRR:7517985 Installation Of High Mass Solar Light At Khayerboni Ashram, Mouza - Khayerboni, Jl No. 96

BRR:7517554 Bids Are Invited For Gear Esv Iv Servomotor M5006066033-Worm Of Barring Gear 32307000 44 Bhel , M5006066037-Rim Of Worm Wheel 32307000 7 Bhel , M5001991042-Spring 31504070C-1 2 Bhel , M5001991043-Spring 31504070C-1 3 Bhel , M5001991044-Spring 32504000C-1 41 Bhel , M5001991045-Spring 32504000C-1 42 Bhel , M5001991046-Piston Ring 32504000C-1 44 Bhel , M5003999015-Stellite Strip 32305000C-1 31 Bhel 27Stg , M5003999016-Stellite Strip 32305000C-1 32 Bhel 31Stg , M5003999017-Stellite Strip 32305000C-1 29 Bhel 26Stg , M5003036026-Stellite Strip 31305028 Bhel , M5003999018-Worm Wheel Shaft 32307000 4 Bhel Bg , M5003999019-Spring 32307000 101 Bhel Bg , M5003999020-Disc Coupling 32307000 54 Bhel Bg , M5003999021-Semi Coupling 32307000 55 Bhel Bg , M5002999099-Trnsvrskey Hpc Left 32427000C1 3 Bhel , M5002999100-Trnsvrskey Hpc Rgt 32427000C1 4 Bhel , M5002999103-Clamp 32427000C1 5 Bhel , M5041056032- Tension Spring 31509005 , M5001991080-Lever 3150900000065 Bhel , M5001991082-Spring 3251800000051 Bhel , M5001991083-Spring 3251800000052 Bhel , M5001991084-Piston Ring 3251800000059 Bhel , M5041036037-Piston Ring 32505000C-1 , Bulk Head Fitting(Bhel) Total Quantity : 2763

BRR:7517541 Bids Are Invited For Led Post Top Lantern (Q3) Total Quantity : 60

BRR:7517323 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) Total Quantity : 40

BRR:7517321 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) Total Quantity : 40

BRR:7516956 Bids Are Invited For 250W Led Flood Light Fittings As Per Bhel Spec. Or12648# It. 02 Total Quantity : 12

BRR:7516795 Bids Are Invited For 09 X Comn Bkr Ug Ordinary Portland Cement Grade 43 , Stone Aggregate Shall Be Crushed Stone 20Mm Graded , Coarse Sand , Stone Aggregate Shall Be Crushed Stone 40Mm Graded , Rr Stone , Tmt Steel Bar 16Mm Dia , Tmt Steel Bar 12Mm Dia , Tmt Steel Bar 10Mm Dia , Tmt Steel Bar 8 Mm Dia , Binding Wire 20 Gauge , Nails 2 Inch For Shuttering , Nails 3 Inch For Shuttering , Nails 5 Inch For Shuttering , Quick Setting Compound , Pbs Roll , Bitumen Blown Type , Water Proofing Compound , Loop Holes Of Size 600X500mm , Wooden Scantling 3 Point 20M Long Section 100X75mm , Steel Door Of Size 900X1800 Mm , Lightning Conductor , Earthing , 20 Watt Led Tube Rod And All Neccessary Fittings , Bulk Head Housing With Led Bulb , 18 W Led Bulb , Brown Matte Modular Electrical Switch 5 Amp , Brown Matte Modular Electrical Switch 5 Amp And Socket 3 Pin , Brown Matte Modular Electrical Switch15 Amp And Socket Multi Purpose , Pvc Round Or Square Block , Casing Capping Double Locked Box Type 1 Inchx 6 Feet Long , Casing Capping Double Locked Box Type 1 And Half Inch X 6 Feet Long , Gang Box 5 Switches 5 Amps , Gang Box 3 Switches 5 Amps , Gang Box 1 Switch 5 Amps , Self Drill Star Screw 1 Inch 200 Nos , Self Drill Star Screw 2 Inch 200 Nos , Wire 1 Sqmm , Wire 1 Point 5 Sqmm , Wire 2 Point 5 Sqmm , Mcb 6 Amp Single Pole , Mcb 16 Amp Single Pole , Mcb 32 Amp Single Pole , Isolator Double Pole 63 Amp , Insulation Tape 25Mm Width Of 9 Mtr Long , Distribution Box 12 Way , Light Gauge Steel Framed Super Structure Total Quantity : 41740

BRR:7516794 Bids Are Invited For 09 X Med Bkr Ug Ordinary Portland Cement Grade 43 , Stone Aggregate Shall Be Crushed Stone 20Mm Graded , Coarse Sand , Stone Aggregate Shall Be Crushed Stone 40Mm Graded , Rr Stone , Tmt Steel Bar 16Mm Dia , Tmt Steel Bar 12Mm Dia , Tmt Steel Bar 10Mm Dia , Tmt Steel Bar 8 Mm Dia , Binding Wire 20 Gauge , Nails 2 Inch For Shuttering , Nails 3 Inch For Shuttering , Nails 5 Inch For Shuttering , Quick Setting Compound , Pbs Roll , Bitumen Blown Type , Water Proofing Compound , Loop Holes Of Size 600X500mm , Wooden Scantling 3 Point 20M Long Section 100X75mm , Steel Door Of Size 900X1800 Mm , Lightning Conductor , Earthing , 20 Watt Led Tube Rod And All Neccessary Fittings , Bulk Head Housing With Led Bulb , 18 W Led Bulb , Brown Matte Modular Electrical Switch 5 Amp , Brown Matte Modular Electrical Switch 5 Amp And Socket 3 Pin , Brown Matte Modular Electrical Switch15 Amp And Socket Multi Purpose , Pvc Round Or Square Block , Casing Capping Double Locked Box Type 1 Inchx 6 Feet Long , Casing Capping Double Locked Box Type 1 And Half Inch X 6 Feet Long , Gang Box 5 Switches 5 Amps , Gang Box 3 Switches 5 Amps , Gang Box 1 Switch 5 Amps , Self Drill Star Screw 1 Inch 200 Nos , Self Drill Star Screw 2 Inch 200 Nos , Wire 1 Sqmm , Wire 1 Point 5 Sqmm , Wire 2 Point 5 Sqmm , Mcb 6 Amp Single Pole , Mcb 16 Amp Single Pole , Mcb 32 Amp Single Pole , Isolator Double Pole 63 Amp , Insulation Tape 25Mm Width Of 9 Mtr Long , Distribution Box 12 Way , Light Gauge Steel Framed Super Structure Total Quantity : 41740

BRR:7516789 Bids Are Invited For 09 X Cook House Bkr Ug Ordinary Portland Cement Grade 43 , Stone Aggregate Shall Be Crushed Stone 20Mm Graded , Coarse Sand , Stone Aggregate Shall Be Crushed Stone 40Mm Graded , Rr Stone , Tmt Steel Bar 16Mm Dia , Tmt Steel Bar 12Mm Dia , Tmt Steel Bar 10Mm Dia , Tmt Steel Bar 8 Mm Dia , Binding Wire 20 Gauge , Nails 2 Inch For Shuttering , Nails 3 Inch For Shuttering , Nails 5 Inch For Shuttering , Quick Setting Compound , Pbs Roll , Bitumen Blown Type , Water Proofing Compound , Loop Holes Of Size 600X500mm , Wooden Scantling 3 Point 20M Long Section 100X75mm , Steel Door Of Size 900X1800 Mm , Lightning Conductor , Earthing , 20 Watt Led Tube Rod And All Neccessary Fittings , Bulk Head Housing With Led Bulb , 18 W Led Bulb , Brown Matte Modular Electrical Switch 5 Amp , Brown Matte Modular Electrical Switch 5 Amp And Socket 3 Pin , Brown Matte Modular Electrical Switch15 Amp And Socket Multi Purpose , Pvc Round Or Square Block , Casing Capping Double Locked Box Type 1 Inchx 6 Feet Long , Casing Capping Double Locked Box Type 1 And Half Inch X 6 Feet Long , Gang Box 5 Switches 5 Amps , Gang Box 3 Switches 5 Amps , Gang Box 1 Switch 5 Amps , Self Drill Star Screw 1 Inch 200 Nos , Self Drill Star Screw 2 Inch 200 Nos , Wire 1 Sqmm , Wire 1 Point 5 Sqmm , Wire 2 Point 5 Sqmm , Mcb 6 Amp Single Pole , Mcb 16 Amp Single Pole , Mcb 32 Amp Single Pole , Isolator Double Pole 63 Amp , Insulation Tape 25Mm Width Of 9 Mtr Long , Distribution Box 12 Way , Light Gauge Steel Framed Super Structure Total Quantity : 41740

BRR:7516721 Bids Are Invited For Led Flood Light Led Flood Light 200 Watt , Jumper Wire 400 Mtr , 2 Core Power Cable 4 Sqmm , Conduit Pipe 2 Inch 15 Mtr , 24 Port Ethernet Patch Panel , 15 Watt Led Spot Light , Megaphone Led Flood Light 200 Watt, Jumper Wire 400 Mtr, 2 Core , Automationtestcategory_Donotuse Total Quantity : 29

BRR:7516697 Bids Are Invited For Assy Pull Cable Accel , Repair Kit , Hose Assy , Sleeve Cyl Rep Kit , Gear Lever Kit , Assy 3 Slace 8 Hose W Slace Bulk Head , Tapper Roller Bearing , Assy Nylon Pipe W Slace Crimped R Slace Hose Assy Pull Cable (Accel), Repair Kit, Hose Assy, Sleeve Cyl , Automationtestcategory_Donotuse Total Quantity : 33

BRR:7516573 Bids Are Invited For Temp Sending Unit , Clutch Plate , Insulation Tape , Clutch Bearing , Wheel Bearing , Self Armature , Shifting Sleeve , Sun Brass Ring , Wiper Blade , Head Light , Door Lock Rh Temp Sending Unit, Clutch Plate, Insulation Tape, Clutch , Thermowells Total Quantity : 43

BRR:7516484 Bids Are Invited For Diaphragm Chamber Brake , Assy 3 Slace 8 Hose W Slace Bulk Head , Clutch Disc 352 Dia , 352 Dia Clutch Cover Assy , Drive 24V Assy , Clutch Master Cyl 19 Point 05 Dia , Clutch Slave Cyl Diaphragm Chamber Brake, Assy 3-8 Hose W-Bulk , Automationtestcategory_Donotuse Total Quantity : 17

BRR:7516329 Bids Are invited for 36W Tube Lightphilips - Boq 1 , 2 5 Mfd Oil Capacitor Keltron - Boq 2 , 20W Led Fittingphilips - Boq 3 , 1 5 Sq Mm Wire Finolex - Boq 4 , Mk Fan Regulator Step Type - Boq 5 , Anchorfan Regulator - Boq 6 , 2 Model Mk Sheet - Boq 7 , Surface Fitting 23W Ledphilips - Boq 8 , 63 Amp 4 Pole Isolator Legrand - Boq 9 , Bulk Head Fitting - Boq 10 , 1 Inch Screw - Boq 11 , Night Lamp Holder - Boq 12 , Pvc Round Block - Boq 13 , 3 4 Inch Screw - Boq 14 , Long Body Tap Waterman Half Inch - Boq 15 , One Point Five Inchscrew - Boq 16 , 11W Led Lamp Philips - Boq 17 , Insulation Tape - Boq 18 , 5 Amp Mk Switch - Boq 19 , 20 Amp Mk Switch - Boq 20 , Mk Dummy - Boq 21 , 1 Model Mk Sheet - Boq 22 , 4 Model Mk Sheet - Boq 23 , 6 Model Mk Sheet - Boq 24 , 8 Model Mk Sheet - Boq 25 , 12 Model Mk Sheet - Boq 26 , 36W Electronic Choke Philips - Boq 27 , 5A 3 Pin Top Anchor - Boq 28 , 16 Amp S S Combined - Boq 29 , Pillar Cock Metro - Boq 30 , 1 Andquarterinch Waste Water Hose - Boq 31 , Night Lamp Pin Type - Boq 32 , 5 Amp Anchor Switch - Boq 33 , 5 Amp Anchor Socket - Boq 34 , Sink Cock Big Sizemetro - Boq 35 , 10 Amp Legrand Mcb - Boq 36 , Two Inch Connection Hose - Boq 37 , Hot Water Connection Hose - Boq 38 , Flush Tank Parry Ware - Boq 39 , Tube Lightside Holder - Boq 40 , 40 Amp 2 Pole Isolator Legrand - Boq 41 , 9 W Led Bulbphilips - Boq 42 , Fan Condensor 2.5 Mfdkeltron - Boq 43 , Bulb Holder - Boq 44 , 5 Amp Switch Great White Make - Boq 45 , 5 Amp Socket - Boq 46 , 15 Amp Switch - Boq 47 , 15 Amp Socket - Boq 48 , 10 Amp Mcb Legrand - Boq 49 , 25 Amp Mcb Legrand - Boq 50 , 32 Amp Mcb 2 Pole - Boq 51 , 63 Amp 4 Pole Isolator - Boq 52 , 63 Amp Rccb 4 Pole - Boq 53 , 40 Amp 4 Pole Isolator - Boq 54 , 40 Amp Rccb - Boq 55 , Regulator Great White 2 Model - Boq 56 , Single Model - Boq 57 , 20 Watt 2 Led - Boq 58 , 6 Amp Mcb - Boq 59 , 16 Amp Mcb - Boq 60 , Long Body Tap - Boq 61 , Angle Cock - Boq 62 , Half Inch Connection Hose - Boq 63 , One And Quarterinch Wast

BRR:7516316 Bids Are Invited For High Mast Lighting Octagonal Tower For Small Area With Led Flood Lighting System (V2) (Q2) Total Quantity : 6

BRR:7516255 Bids Are Invited For 1 TECH SPEC FOR SS 6 OD WATER TIGHT DK/BHD FITTING 2 12OD X 10OD SS STRAIGHT REDUCING CONNECTOR 3 40 NB SS SET IN FLANGE, DRG NO 2092166000 4 SS FLAP FOR EXHAUST PIPE 300 NB 5 15 NB,SS 304 BULKHEAD/DECK PIECE, DRG. 2092186010 Total Quantity : 57

BRR:7516137 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) ((3 3 )) 1 Lakh (S) Total Quantity : 54

BRR:7516118 Bids Are Invited For High Mast Lighting Octagonal Tower For Small Area With Led Flood Lighting System (V2) Total Quantity : 2

BRR:7516035 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) ((3 3 )) 5 Lakh (S) Total Quantity : 1

BRR:7516015 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) ((3 3 )) 5 Lakh (S) Total Quantity : 1

BRR:7516014 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) ((3 3 )) 5 Lakh (S) Total Quantity : 1

BRR:7515869 Installation Of 17 Nos Solar Street Lights At Different Booths Under Alipurduar Ii Panchayat Samity Zone 1 Within Alipurduar District

BRR:7515679 Supply Of Stationary Articles At S.P. Office, Purba Bardhaman=-2 Oval Glass Paper Weight for Office Desk (Glass Body) 3 3D square shapePaper Weightfor Office Desk(Plastic Body) 4 A4 size Paper Tray for Office Desk (Plastic Body)Best Quality 5 Open Plastic Waste Paper Bin without net (Dipak or equivalent) 6 Open Plastic Waste Paper Bin with net(Dipak or equivalent) 7 Metal Binder Clip 15 mm (Elfen or equivalent) 8 Metal Binder Clip 19 mm (Elfen or equivalent) 9 Metal Binder Clip 25 mm (Elfen or equivalent) 10 Metal Binder Clip 35 mm (Elfen or equivalent) 11 Metal Binder Clip 41 mm (Elfen or equivalent) 12 James Clip without Plastic coated (100 PCs in a box or equivalent) 13 James Clip with Plastic coated (100 PCs in a box or equivalent) 14 Short Hand Note Book- Apsara (50 Pages) 15 Thermal Paper Roll for Breath Analyser (40 mm/1.57 O.D.) Best quality 16 Fax Roll (Corex or equivalent) 17 White Envelop (5 X 12 Size) Best quality 18 White Envelop (6 X 9 Size) Best quality 19 White Envelop (5 X 7 Size) Best quality 20 White Envelop (A4 Size) Best quality 21 White Envelop with printing (6 X 12 Size) Best quality 22 White Envelop with printing (6 X 9 Size) Best quality 23 White Envelop with printing (5 X 7 Size) Best quality 24 White Envelop with printing (A4 Size) Best quality 25 Envelop Brown (6 X 12 Size) Best quality 26 Envelop Brown (5 X 11 Size) Best quality 27 Clothing Envelop (16 X 12) Best quality 28 Clothing Envelop (6 X 16) Best quality 29 Clothing Envelop (10 X 16) Best quality 30 Correction White Fluid Pen (Faber Castell) 31 Parker Vector Standard CT Roller Ball Pen (Black/Blue) 32 Cello Pinpoint Ball Pen (Black/ Blue) 33 Uni-ball eye pen (Different Colour) 34 ADD Gel Achiever Pen (Different Colour) 35 Use and Through Pen (Different Colour)Best Quality 36 Uni-ball Gel Pen Impact eyePen (Different Colour) 37 Uni-ball Micro Roller Pen UB 120 38 Meeting Gel Pen (Linc) 39 ADD Gel Refill (Achiever Different Colour) 40 Both sided Ball Pen (Best Quality) 41 Plastic Refill Small10 pcs in a packets (Black, Red, Blue) 42 Plastic Refill Big10 pcs in a packet (Black, Red, Blue) 43 Highlighter Pen Different Colour (Luxor/ Faber Castell/ Camlin) 44 Permanent Fine Marker Pen (Luxor/ Faber Castell/ Camlin) 45 PB Permanent Marker Pen Big Size (Luxor/ Faber Castell/ Camlin) 46 Fountain Pen Ink (Waterman or equivalent) 47 Agni Gel Ball Pen (Best Quality) 48 Cello Pen (Techno trip) 49 Uni Jetstream Pen101 (0.7 ballpoint) 50 Uni Jetstream pen Refill101 (0.7 ballpoint) 51 Hi-Tecpoint0.5 ballpoint Pen (Luxor/ Pilot) 52 Hitech Point Pen(V5) (Luxor/ Pilot) 53 Ball Pen ((Reynolds 045) 54 Pilot V7 (HI-Tecpoint 0.7) Pen 55 Pilot V7 (HI-Tecpoint 0.7) Pen Refill 56 Pilot V5 (HI-Tecpoint 0.7) Pen 57 Pilot V5 (HI-Tecpoint 0.7) Pen Refill 58 Refill(Reynolds 045) 59 Pen Stand Small(Best Quality) 60 Pen Stand Big (Best Quality) 61 Sketch Pen 12 colour packets (Luxor/ Pilot/ Camlin) 62 Permanent Marker Pen Small Size- Blue/ Black (Add gel) 63 Permanent Marker Pen Big Size- Blue/ BlackBest Quality 64 White Board Marker Pen (Luxor/ Pilot/ Camlin) 65 Tape Dispenser (Small) (Best Quality) 66 Tape Dispenser (Big) (Best Quality) 67 Wooden Pencil- HB 10 Pcs in a Box (Nataraj/Faber Castell/ Camlin) 68 Pencil Carbon (Kores or equivalent) 69 Short Hand Steno Pencils10 Pcs in a Box (Apsara/Nataraj) 70 Pencil Carbon Big Size (Kores or equivalent) 71 Pencil Sharpener- Nataraj/ Apsara 72 Pencil Battery AAA for remote control 1.5 volt (Duracell or equivalent) 73 Alkaline Pencil Battery AA 1.5 Volt (Duracell or equivalent) 74 Alkaline Pencil Battery AAA 1.5 Volt (Duracell or equivalent) 75 Pencil Battery AAA 1.5 Volt (Nippo or equivalent) 76 Pencil Battery AA 1.5 Volt (Nippo or equivalent) 77 Battery 9 volt (Duracell or equivalent) 78 Alkaline rechargeable Pencil batteryAA 1.5 Volt with machine 4 Pcs Battery (Best Quality) 79 Garden Outdoor Light (Philips /Havells) 80 Emergency Charger Light (Sunka or equivalent) 81 Laser Light (Best Quality) 82 Torch Light (with Small Pencil Battery) (Bajaj or equivalent) 83 Water Spongewith Plastic box (Best Quality) 84 Signature Pad (25 Sheets)(Best Quality) 85 D.O Pad 50 Pages (A4 Size 100 GSM excel Bond Paper) 86 D.O Pad Ambrosine 50 Pages (A4 Size 100 GSM excel Bond Paper) 87 Pin Steel-(King)100 Gram in a Pkt 88 Stamp Pad – Small (Faber Castell or equivalent) 89 Stamp Pad – Big (Faber Castell or equivalent) 90 Stamp Ink 120 Ml. (Griper or equivalent) 91 Gum (300 Ml Poloor equivalent) 92 Gum (1 Lt.Poloor equivalent) 93 Fevi-Stick (15 gm) 94 Fevi-Quick Small 95 Fevi-Gum Tube (300 Ml) 96 Fevicol Small Tube 97 Dendrite Tube (50 ml) 98 Sealing Wax-(Red)8 Sticks in a Pkt 99 Sealing Wax-(Green)8 Sticks in a Pkt 100 Tag bundle (white) 10 X100 (Best Quality) 101 Thread Ball (Best Quality) 102 Pin Cushion/ Stand Desk Container(Best Quality) 103 Wooden Scale (Dayal or equivalent) 104 Stainless Steel Scale12 inch(Dayal or equivalent) 105 Plastic Scale 12 inch(Dayal/ Doms or equivalent) 106 Duster- thickSize (24 X 24)(Best Quality) 107 Knife with Wooden Handle (Best Quality) 108 Knife with Fiber Handle (Best Quality) 109 Bodkin (Forna) with Wooden/ Plastic Handle (Best Quality) 110 File Cover (Four Fold) Best Quality 111 File Cover (Two Fold) Best Quality 112 Plastic Channel File-A4 (Best Quality) 113 File Flap (Best Quality) 114 Display File Big Size (Best Quality) 115 Duck File (Best Quality) 116 Executive File (Best Quality) 117 Plastic Button Folder- FS (Transparent/ Non transparent)Best Quality 118 Plastic Folder (Clear)- A4 (Best Quality) 119 Calculator 12 Digit (Citizen/ Casio or equivalent) 120 Remote Control Calling Bell (GM or equivalent) 121 Stapler Machine- Small (Kangaro or equivalent) 122 Stapler Pin- Small (Kangaro or equivalent) 123 Stapler Machine-medium (Kangaro or equivalent) 124 Stapler Pin- medium (Kangaro or equivalent) 125 Jumbo Stapler Machine (Kangaro or equivalent) 126 Jumbo Stapler Machine Pin (Kangaro or equivalent) 127 Punching Machine Small Size (Best Quality) 128 Punching Machine Big Size (Best Quality) 129 Punching Machine Jumbo (Best Quality) 130 Clip Board Plastic (Best Quality) 131 Scissors Big Size (Best Quality) 132 Mosquito Repellent Machine (Goodnight/Allout/Mortein Machine) 133 Mosquito Repellent Liquid 45ml (Goodnight/Allout/Mortein) 134 Mosquito Coil- (Mortein/Goodnight) 135 Rubber Stamp Pad- 110 MM X 69 MM- Luxor (Plastic Body) 136 Auto Ink StampPlastic Body(Best Quality) 137 Office Seal with Date Stamp (Best Quality) 138 Cello Tap Medium Size (Best Quality) 139 Cello Tap Big Size (Best Quality) 140 Brown Tape Big Size (Best Quality) 141 Drinking Water Glass (Local make) 142 Water Bottle 1L(Milton or equivalent) 143 Water Bottle 2L (Milton or equivalent) 144 Drinking Water Glass 6 Pc (Borosil or equivalent) 145 Plate Big Size (La-Opala) 146 Plate Medium Size (La-Opala) 147 Plate Small Size (La-Opala) 148 Bowl (Bone-China or La-Opala) 149 Soup Bowl (Bone-China or La-Opala) 150 Bowl Big Size(Bone-China or La-Opala) 151 Cooking 03 Pcs Set(Milton or equivalent) 152 Tea Tray (Big) Best Quality 153 Tea Tray (Small) Best Quality 154 Table Spoon Steel Crystal (06 Pcs Set) 155 Tea Spoon Steel Crystal (06 Pcs Set) 156 Fork Spoon Steel Crystal (06 Pcs Set) 157 Thermo-Flask Steel 1 Ltr (Cello/ Miltonor equivalent) 158 Thermo-Flask Steel 2 Ltr (Cello/ Miltonor equivalent) 159 Car Freshener (Air Wick or equivalent) 160 Tea set (Ceramic/ Bone-China) 161 Cups & Saucers white (La-Opala/Cello or equivalent) 162 Dinner Set white 4 Pcs in a Box (Bone-China or La-Opala) 163 Dinner Set white 6 Pcs in a Box (Bone-China or La-Opala) 164 Dinner Set white 8 Pcs in a Box (Bone-China or La-Opala) 165 Dinner Set white 12 Pcs in a Box (Bone-China or La-Opala) 166 Dinner Set white 18 Pcs in a Box (Bone-China or La-Opala) 167 Dinner Set white 24 Pcs in a Box (Bone-China or La-Opala) 168 Glass Tea Jar 500 ml (Borosil or equivalent) 169 Plastic Jug (Cello or equivalent) 170 Hit Spray Black (Size 400 ml Godrej) 171 Hit Spray red (Size 200 ml Godrej) 172 Room Air Freshener big (AmbiPur/ Godrej or equivalent) 173 Room Air Freshener big ( Riya Sandell) 174 Colin Spray 200 ml (Size 200 ml) 175 Hand Wash 200 Ml (Dettol or equivalent) 176 Table Cleaner 500ml (Calin or equivalent) 177 Vim Powder (500g) 178 Bleaching Powder (500g) 179 Phenyl 1L (Bengal Camicalor equivalent) 180 Odonil (50g) 181 Odonil (100g) 182 Lifebuoy Soap (100g) 183 Desk Calendar Stand (Best Quality) 184 Desk Calendar Refill (Best Quality) 185 Writing Pad Small (Best Quality) 186 Writing Pad Medium (Best Quality) 187 Writing Pad Big (Best Quality) 188 Sticky Notepad(Post-Itor equivalent) 189 Page Making 3 (Three) Colour (Best Quality) 190 Sketch Pen – All Colour (12 Pcs in a Pkt) 191 Cotton Mop with Stick (Best Quality) 192 Cotton Mop (Best Quality) 193 Latrine Brass (Best Quality) 194 Ajanta Quartz Clock (Best Quality) 195 Guarder Nylon Colour (Best Quality) 196 Plastic Glass Lid (06 Pcs Set.) 197 Lock 7 lever(Godrej or equivalent) 198 Lock 8 lever(Godrej or equivalent) 199 Wooden Duster (Best Quality) 200 Note Book Spiral Small/medium (Times or equivalent) 201 Note Book Spiral Big (Times or equivalent) 202 White Board Best Quality 203 Notice Board Best Quality 204 Notice Board with glass cover Best Quality 205 Push Dustbin Big Size(Cello or equivalent) 206 Push Dustbin Medium Size(Cello or equivalent) 207 Push Dustbin Small Size(Cello or equivalent) 208 Bed Sheet (Single)Bombay Dyeing or equivalent 209 Bed Sheet (Double)Bombay Dyeing or equivalent 210 Pillow Cover Big Size (Bombay Dyeing or equivalent) 211 Pillow Cover Small Size (1 X 1.5 Ft.)Bombay Dyeing or equivalent 212 Pillow (Bombay Dyeing or equivalent) 213 Side Pillow (Bombay Dyeing or equivalent) 214 Towel Big Size (Bombay Dyeing or equivalent) 215 Towel Small Size (Bombay Dyeing or equivalent) 216 Pillow Small Size (Bombay Dyeing or equivalent) 217 Cushion with Cover (Bombay Dyeing or equivalent) 218 Table Glass 8mm (Modiguard or equivalent) 219 Mirror (Modiguard or equivalent) 220 Gangi with printing (Best Quality) 221 T Shirt with printing (Best Quality) 222 Microvan Per Pc. (Best Quality) 223 Vertical Blinds (Best Quality) 224 Curtain Cloth (Best Quality) 225 Inch Tape 5 (Best Quality) 226 Electric Tester (JJ or equivalent) 227 Fountain Ink (Waterman or equivalent) 228 Electric Kettle Big Size (Bajaj/ MorphyRichards or equivalent) 229 Electric Kettle Small Size(Bajaj/ Morphy Richardsor equivalent) 230 Flag Stand (Steel Body) 231 Flag (6×4 Size Clothing) 232 Britannia Biscuits (400g Pkt) 233 Green Tea (100 Tea Bag in a Pkt) 234 Tea (Best Quality (1 Kg Pkt) Lipton 235 Sugar (Best Quality)1 Kg 236 Sugar Cube (Best Quality) 237 Paper Cup (50 ml 25 Pcs in a Pkt.) 238 Iron Machine (Bajaj or equivalent) 239 Mixer Grander (Bajaj or equivalent) 240 Door Mat (Best Quality) 241 Floor Mat (Best Quality) 242 Floor wiper with handle (Best Quality) 243 Glow Sign Board (Supply & fittings with Iron frame) 244 Face Mask (Three Layer Poplin Cloth) 245 Spike Booster (Best Quality) 246 Telephone Receiver (Bettel or equivalent) 247 Telephone Receiver with CLI (Bettel or equivalent) 248 Wireless Telephone Receiver (Bettel or equivalent) 249 Cordless Telephone Receiver (Panasonic or equivalent) 250 1+1 Plan Phone (Bettel or equivalent) 251 Telephone Wire (04 Pair) 252 Telephone Wire (02 Pair) 253 Plastic Bucket 10L (Cello or equivalent) 254 Plastic Bucket 16L (Cello or equivalent) 255 Plastic Bucket 20L (Cello or equivalent) 256 Plastic Mug (Cello or equivalent) 257 ORS 200g (Electoral or equivalent) 258 Glocon-D (200g Pkt) 259 Match Box (Litex or equivalent) 260 MCB 400 AMP (04 Pole) L&T or equivalent 261 4 Core Aluminium Cable (10 Sq. mm JJ) 262 Naphthalene (Bengal chemical or equivalent) 263 Savlon surface Cleaner Spray (200 ml) 264 Doctor (IN/OUT) Board (Best Quality) 265 Engagment Board (Best Quality) 266 Electric Extension Board (Skill or Equivalent) 267 Pen Drive Metallic Body 3.0 (32 GB) HP/SANDISK / SONY 268 Pen Drive Metallic Body 3.0 (64 GB) HP/SANDISK/ SONY 269 Pen Drive Metallic Body 3.0 (128 GB) HP/SANDISK / SONY 270 Ultra Dual USB Pen drive 64 Gb (One Side USB 3.1 And Other Side Type C) 271 Ultra Dual USB Pendrive 128 Gb (One Side USB 3.1 And Other Side Type C) 272 Ultra Dual USB Pendrive 32 Gb (One Side USB 3.1 And Other Side Type C) 273 Plastic Cover for Security Pass (Size 3” X 4”) 274 Ribbon (Blue Colour) for Plastic Cover of Security Pass (Size 28” Ribbon per Pc with clip) 275 Executive Dairy (As per Sample) 276 Normal Dairy (As per Sample) 277 Plastic Cover (4” X 6”) 278 Blank CD (Sony or equivalent) 279 Blank DVD (Sony or equivalent) 280 Tissue Paper 281 Room Hitter (Bazaj or Equivalent) 282 Door Closer (Godrej or Equivalent) 283 Gizer 3 Litter (Havells or Equivalent) 284 Gizer 5 Litter (Havells or Equivalent) 285 Gizer 6 Litter (Havells or Equivalent) 286 Gizer 10 Litter (Havells or Equivalent) 287 Gizer 15 Litter (Havells or Equivalent) 288 Normal Tiffin Packet (6 items in a packet) 289 Special Tiffin Packet (6 items in a packet) 290 Table Fan (Havells or Equivalent) 291 Ceilling Fan (Havells or Equivalent) 292 Cabin Fan (Havells or Equivalent) 293 Stand Fan (Havells or Equivalent) 294 Exhaust Fan (Havells or Equivalent) 295 Ribbon with cartridge (TVS or equivalent) 296 803 Toner Colour Cartridge for DeskJet Color Printer (HP or equivalent) 297 803 Toner Black (HP or equivalent) 298 Toner Cartridge - Model 110 HP (Original) 299 Photocopier Toner Cartridge Original (Sharp235/237) 300 Photocopier Toner Cartridge Original (Canon NPG 51) 301 Photocopier Toner Cartridge Original (Canon NPG 28) 302 Photocopier Toner Cartridge Original (Canon NPG 59) 303 Laser Toner Cartridge for Model- HP 88 A (Original) 304 Laser Toner Cartridge for Model- HP 12 A (Original) 305 Laser Toner Cartridge for Model- Canon 925 (Original) 306 Laser Toner Cartridge for Model- HP 18 A (Original) 307 Toner Cartridge (Model- Samsung 116S/116L Original 308 Toner Cartridge Konica (bizhub306i) 309 Toner Cartridge (Model- Pantum 210KEV) Original 310 Toner Cartridge Refilling (Model- Pantum 210KEV or equivalent) 311 Toner Cartridge - Model 110 HP (HP or equivalent0 312 Photocopier Toner Cartridge Refilling (Konica) 313 Photocopier Toner Cartridge Refilling (Sharp235/237) 314 Photocopier Toner Cartridge Refilling (Canon NPG 51) 315 Photocopier Toner Cartridge Refilling (Canon NPG 28) 316 Photocopier Toner Cartridge Refilling (Canon NPG 59) 317 Laser Toner Cartridge for Model- HP 88 A (Zebion or equivalent) 318 Laser Toner Cartridge for Model- HP 12 A (Zebion or equivalent) 319 Laser Toner Cartridge for Model- Canon 925 (Zebion or equivalent) 320 Laser Toner Cartridge for Model- HP 18 A (Zebion or equivalent) 321 Toner Cartridge (Model- Samsung 116S/116L or equivalent) 322 Toner Cartridge Konica (bizhub306i) 323 Toner Cartridge (Model- Sharp 235/237 or equivalent) 324 Drum Unit (Sharp Photo Copier Machine) 325 Pannel Bord (Sharp Photo Copier Machine) 326 Mother Board (Sharp Photo Copier Machine) 327 Bypass Tray (Sharp Photo Copier Machine) 328 LSU Unit (Sharp) 329 Pressure Roller (Sharp) 330 Power Supply Board (Sharp) 331 Holder (Sharp) 332 Developer (Sharp) 333 Heat Roller (Sharp) 334 Drive Unit (Sharp) 335 CCD Unit (Sharp) 336 Drum Unit (Konica) 337 Developer (Konica) 338 Charger (Konica) 339 Fusing Unite (Konica) 340 Mother Board (Konica) 341 Power Supply Board (Konica) 342 Toner Cartridge (Model- Konica Minolta 226i) 343 Toner Cartridge Refilling (Model- Konica Minolta 226i) 344 Toner Cartridge (Model- Konica Minolta 185en) 345 Toner Cartridge Refilling (Model- Konica Minolta 185en) 346 Laser Toner Cartridge for Model – HP Laser MFP 136nw 347 Laser Toner Cartridge for Model – PG-208K 348 Canon Ink Tank 790 Black 349 Canon Ink Tank 790 Yellow 350 Canon Ink Tank 790 Magenta 351 Canon Ink Tank 790 Cyne 352 Laser Toner Cartridge for Model – HP Laser W1110A 353 Laser Toner Cartridge for Model –Pantum M6500 Laser Multifunction Printer 354 Drum Konica (Model -185en) 355 Drum Konica (Model -226i) 356 DC Blade Konica (Model -185en) 357 DC Blade Konica (Model -226i) 358 Developer Konica (Model -185en) 359 Developer Konica (Model -226i) 360 Power Supply Bord Konica (Model -185en) 361 Power Supply Bord Konica (Model -226i) 362 Heat Roller Konica (Model -185en) 363 Heat Roller Konica (Model -226i) 364 Pressure Roller Konica (Model -185en) 365 Pressure Roller Konica (Model -226i) 366 Drum Cherger Konica (Model -185en) 367 Drum Cherger Konica (Model -226i) 368 By Pass Tray Konica (Model -185en) 369 By Pass Tray Konica (Model -226i) 370 BROTHER LASERJET PRINTER CAETRIDGE TN-2365 Original 371 BROTHER LASERJET PRINTER CAETRIDGE TN-2365 Refilling 372 BROTHER LASERJET PRINTER DRUM DR-2365 373 BROTHER LASERJET PRINTER CAETRIDGE TN-B021 Original 374 BROTHER LASERJET PRINTER CAETRIDGE TN-B021 Rifilling 375 BROTHER LASERJET PRINTER DRUM DR-B021 376 BROTHER DCP T220 INK CYAN COLOUR 377 BROTHER DCP T220 INK MAGENTA COLOUR 378 BROTHER DCP T220 INK BLACK COLOUR 379 BROTHER DCP T220 INK YELLOW COLOUR 380 DRESSING TABLE 3 X 13 381 DINING TABLE 10 X 3 X30 382 SECRETARIATE TABLE 54 X 30 X 30 383 SECRETARIATE TABLE 5 X 3 X 30 384 STOOL 12 X 12 X 18 385 OFFICE TABLE 47 X 29 X 30 386 BENCH WITHOUT ARMS 6 X 12 X 18C 387 OFFICE TABLE 47 X 29 X 30 CPT 388 SOFA (1 SEATER) 389 SOFA (2 SEATER) 390 SOFA (3 SEATER) 391 EXECUTIVE WOODEN CHAIR 392 PLASTIC CHAIR WITH ARM 393 PLASTIC CHAIR WITHOUT ARM 394 MOULDED CUSH. ARM CHAIR (Ornet) 395 EXECUTIVE TABLE 6 X 4 X 2.5 396 EXECUTIVES REVOLVING CHAIR 397 WOODEN CHAIR 398 COMPUTER CHAIR WITH ARMS 399 STEEL ALMIRAH WITH LOCKER 78 X 35 X 18 400 STEEL RACK 72 X 48 X 18 SIX SHELVS 401 STEEL ALMIRAH SMALL 402 STEEL RACK SMALL 403 VISITOR CHAIR 2 SEATER 404 VISITOR CHAIR 3 SEATER 405 WOODEN CABINET 406 CENTRAL TABLE 407 WOODEN TEA TABLE WITH GLASS 408 GLASS SMOOKE 6MM 409 GLASS WHITE 6MM 410 WOODEN SIDE UNITS 411 WOODEN ALMIRAH 412 WOODEN WORDDROP 413 Supply & Installation with fitting fixing of Wooden Partition 414 Supply & Installation with fitting fixing of Wooden Panelling 415 Supply of Barricade Tape 416 Supply of Book The Motor Vehicles Act, 1988 417 1. Supply of Book The Central Motor Vehicles Rules 1989 418 1. Supply of Book Bharatiya Surakhya Adhiniyam 2023 419 1. Supply of Book Bharatiya Nagarik Surakha Sanhita 2023 420 1. Supply of Book Bharatiya Nyaya Sanhita 2023 421 Supply of Book West Bengal Treasury Rules 2005 422 Supply of Book West Bengal Service Rules (Part-I & Part -II) 423 Supply of Book West Bengal Financial Rules (Volume-I & II ) 424 Supply of Book State Govt. Pension Problems & Solution 425 Supply of Book SC/ST Rules 426 Supply of Book the Arms Act-1959 427 Supply of Book Hand Book Central Govt.

BRR:7515677 Supply For Cctv, Computer Accessories And Electronic Appliance At S.P. Office, Purba Bardhaman.- 1 CCTV Articles 2 Supply & installation of USB Extention (Iball or equivalent) 3 Supply & installation of Bulet Colour Camera (Dahua) 4 Supply & installation of 5 Port POE Switch(Dahua) 5 Supply & installation of NVR 8 Port (Dahua) 6 Supply of wire CAT 6 (Finolex) 7 Supply & installation of fiber cable (Syrotech) 8 Supply & installation of Patch Cord(Syrotech) 9 Supply & installation of TG Box (Local Made) 10 Supply & installation of Media Connector Gigabit (Syrotech) 11 Supply & installation of 2 TB Hard Disk (Toshiba/WP) 12 Supply & installation of 8 Port POE Switch (Dahua) 13 Supply & installation of POE Box(Dahua) 14 Supply & installation of 4/4 Box(Preeti Plast) 15 Supply & installation of Spike(Bajaj) 16 Supply & installation of RJ 45 (D-link) 17 Supply & installation of CAT 6 to HDMI Connecter (LM) 18 Supply & installation of XVR 16 Port(Dahua) 19 Supply & installation of Bulet 3+1 Cable(CP Palus) 20 Supply & installation of BNC(Iball) 21 Supply & installation of DC(LM) 22 Supply & installation of IPC Bulet Colour Camera (Dahua) 23 Supply & installation of NVR 16 Port(Dahua) 24 Supply & installation of 4 TB Hard Disk (Toshiba/WP) 25 Supply & installation of CAT 6 Cable (Finolex 26 Supply & installation of Wireless Mouse (Logi Tech) 27 Supply & installation of Monitor 22(Dahua) 28 Supply & installation of Monitor 24(Dahua) 29 Supply & installation of Monitor 27(Dahua) 30 Supply & installation of Monitor 32(Dahua) 31 Supply & installation of HDMI Connecter 10 Mtr. 32 Supply & installation of NVR 32 Port (Dahua) 33 Supply & installation of NVR4216 16 Port (Dahua) 34 Supply & installation of ONU (Syrotech) 35 Supply 24 Port Indestrial Switch (D-Link) 36 Computer Accessories 37 Pen Drive Metallic Body 3.0 (32 GB) HP/SCADISK / SONY 38 Pen Drive Metallic Body 3.0 (64 GB) HP/SCADISK/ SONY 39 Pen Drive Metallic Body 3.0 (128 GB) HP/SCADISK / SONY 40 ULTRA DUAL USB PENDRIVE 64 GB ONE SIDE USB 3.1 AND OTHER SIDE TYPE C 41 ULTRA DUAL USB PENDRIVE 128 GB ONE SIDE USB 3.1 AND OTHER SIDE TYPE C 42 ULTRA DUAL USB PENDRIVE 32 GB ONE SIDE USB 3.1 AND OTHER SIDE TYPE C 43 OTG Pen Drive 3.0 (16 GB) HP/SCADISK / SONY 44 OTG Pen Drive 3.0 (32 GB) HP/SCADISK / SONY 45 OTG Pen Drive 3.0 (64 GB)HP/SCADISK / SONY 46 OTG Pen Drive 3.0 (Normal Port) (16 GB) HP/SCADISK/ SONY 47 OTG Pen Drive 3.0 [Normal Port) (32 GB) HP/SCADISK/SONY 48 OTG Pen Drive 3.0 [Normal Port](64 GB) HP/SCADISK / SONY 49 OTG Pen Drive 3.0 [Normal Port) (128 GB) HP/SCADISK / SONY 50 OTG Pen Drive 3.0 [Type C] (16 GB) HP/SCADISK / SONY 51 OTG Pen Drive 3.0 [Type C] (32 GB) HP/SCADISK / SONY 52 OTG Pen Drive 3.0 [Type C] (64 GB) HP/SCADISK / SONY 53 OTG Pen Drive 3.0 [Type C] (128 GB) HP/SCADISK / SONY 54 Sata Male/Female Power Comverter 55 Processor Fan (Intel) 56 M.2 256 GB for Laptop (Branded ) 57 M.2 512 GB for Laptop ( Branded ) 58 NVMe 256 GB for Laptop (Branded ) 59 NVMe 512 GB for Laptop (Branded ) 60 Graphics Card 2 GB (NVIDIA ) 61 Graphics Card 4 GB (NVIDIA ) 62 External Hard Disk USB 3.0 (1 TB) SEAGATE / TRANSCEND/SONY/SAMSUNG 63 External SSD ( 1 TB ) SEAGATE / TRANSCEND/SONY/SAMSUNG 64 External SSD (2TB ) SEAGATE / TRANSCEND/SONY/SAMSUNG 65 External Hard Disk USB 3.0 (2 TB) SEAGATE / TRANSCEND/SONY/SAMSUNG 66 External Hard Disk USB 3.0 (4 TB) SEAGATE/ TRANSCEND/SONY/SAMSUNG 67 Headphone Normal (HP /JBL /Boat ) 68 Multimedia Headphone Big (Sony /JBL ) quantum 100 wired 69 SATA HARD DISK FOR LAPTOP (I TB) SEAGATE /I TRANSCEND/ SONY 70 SATA HARD DISK FOR LAPTOP (2 TB) SEAGATE /TRANSCEND / SONY 71 Bluetooth Headphone (Sony/ JBL/ Boat) 72 Bluetooth Device 73 Router/Modem Double Aerial (Gigabyte / D-Link) 74 Router/Modem Four Aerial dual band (Gigabyte / D-Link) 75 DDR 3 RAM (8 GB) for Laptop (COMFORTABLE FOR LAPTOP) 76 DDR 3 RAM (16 GB) for Laptop (COMFORTABLE FOR LAPTOP) 77 DDR 3 RAM (32 GB) for Laptop (COMFORTABLE FOR LAPTOP) 78 DDR 5 RAM (8 GB) for Laptop (COMFORTABLE FOR LAPTOP) 79 DDR 5 RAM ( 16 GB) for Laptop (COMFORTABLE FOR LAPTOP) 80 DDR 5 RAM (32 GB) for Laptop (COMFORTABLE FOR LAPTOP) 81 DDR 4 RAM (4 GB) for Laptop (COMFORTABLE FOR LAPTOP) 82 DDR 4 RAM (8 GB) for Laptop (COMFORTABLE FOR LAPTOP) 83 DDR4 Motherboard 110(Gigabite/Asus) 84 DDR4 Motherboard250(Gigabite/Asus) 85 DDR4 Motherboard310 (Gigabite/Asus) 86 DDR4 Motherboard 410 (Gigabite/Asus) 87 DDR4 Motherboard 510 (Gigabite / Asus) 88 DDR4 Motherboard 610 (Gigabite / Asus) 89 DDR4 Motherboard 110 (Zebronics / Frontech) 90 DDR4 Motherboard250(Zebronics / Frontech) 91 DDR4 Motherboard310 (Zebronics / Frontech) 92 DDR4 Motherboard 410 (Zebronics / Frontech) 93 DDR4 Motherboard 510 (Zebronics / Frontech) 94 DDR4 Motherboard 610 (Zebronics / Frontech) 95 DDR3 Motherboard 61(Gigabite / Asus) 96 DDR3 Motherboard 81(Gigabite / Asus) 97 DDR3 Motherboard 110(Gigabite / Asus) 98 DDR3 Motherboard 61 (Zebronics / Frontech) 99 DDR3 Motherboard 81(Zebronics / Frontech) 100 DDR3 Motherboard 110(Zebronics / Frontech) 101 SATA SSD- 512 GB (Seagate/Trascend /WD) 102 SATA SSD – 256 GB (Seagate/Trascend /WD) 103 SATA SSD – 120 GB (Seagate/Trascend /WD) 104 SATA SSD – 1 TB (Seagate/Trascend /WD) 105 Power Cord/Cable - (Printer / Desktop) 106 Hard Disk -500 GB (Seagate/Trascend /WD) 107 Hard Disk -1 TB (Seagate/Trascend /WD) 108 Hard Disk -2 TB (Seagate/Trascend /WD) 109 Hard Disk -4 TB (Seagate/Trascend /WD) 110 Keyboard & Mouse (Logitech or equivalent) Combo 111 Keyboard & Mouse Cordless Combo (Logitech or equivalent) 112 Keyboard (Logitech or equivalent) 113 Mouse (Logitech or equivalent) 114 TVS Gold Keyboard 115 Cabinet With SMPS (Frontech or Equivalent) 116 Cabinet(Frontech or Equivalent) 117 SMPS(Frontech or Equivalent) 118 DDR4 RAM 8GB (Starlite/Corsair/Crucial) 119 DDR 5 RAM 8GB (Starlite/Corsair/Crucial) 120 DDR4 RAM 4GB (Starlite/Corsair/Crucial) 121 DDR 5 RAM 4GB (Starlite/Corsair/Crucial) 122 DDR2 RAM 2GB (Starlite/Corsair/Crucial) 123 DDR3 RAM 8GB (Starlite/Corsair/Crucial) 124 DDR3 RAM 4GB (Starlite/Corsair/Crucial) 125 DDR3 RAM 2GB (Starlite/Corsair/Crucial) 126 UPS- 650 VA (Microtech/Zebronics/APC Easy) 127 UPS- 1000 KV (Microtech/Zebronics/APC Easy) 128 Supportedi3 Processor 6th Generation 129 Supportedi3 Processor 7th Generation 130 Supportedi3 Processor 9th Generation 131 Supportedi3 Processor 10th Generation 132 Supportedi3 Processor 11th Generation 133 Supportedi3 Processor 12th Generation 134 Supportedi3 Processor 13th Generation 135 Supportedi5 Processor 6th Generation 136 Supportedi5 Processor 7th Generation 137 Supportedi5 Processor 9th Generation 138 Supportedi5 Processor 10th Generation 139 Supportedi5 Processor 11th Generation 140 Supportedi5 Processor 12th Generation 141 Supportedi5 Processor 13th Generation 142 Supportedi7 Processor 6th Generation 143 Supportedi7 Processor 7th Generation 144 Supportedi7 Processor 9th Generation 145 Supportedi7 Processor 10th Generation 146 Supportedi7 Processor 11th Generation 147 Supportedi7 Processor 12th Generation 148 Supportedi7 Processor 13th Generation 149 HP LaserJet Printer P1108 150 Canon LaserJet 6030B Printer 151 HP LaserJet Printer M1136w 152 HP LaserJet Printer 1020 Plus 153 HP Laserjet 126 Series 154 HP Laserjet 226 Series 155 Flatbed Scaner (HP /CANON ) 156 Fast Scaner ( HP /CANON ) 157 Canon Image Class MF3010 158 HP LaserJet Pro Printer M202dw 159 LED Monitor 24” (Dell/HP/Acer) 160 LED Monitor 27” (Dell/HP/Acer) 161 LED Monitor 32” (Dell/HP/Acer) 162 Supply of Computer Webcam with Microphone 163 Computer speaker 2.0 164 Teflon 165 Pressure Roller 166 Paper Pickup Roller 167 Relay Section 168 Paper Out Tray 169 Power Supply Unit 170 Logic Card 171 Drum Unit (HP Neverstop LaserJet Pro 1200W) complete 172 Printer Head (9 Pin) TVS MSP 250 Star DOT Matrix Printer 173 Logic Cadr TVS MSP 250 Star DOT Matrix Printer 174 Power Unit (9 Pin) TVS MSP 250 Star DOT Matrix Printer 175 Router /Modem Power Adapter 176 Drum Unit (HP Neverstop Laser MFP 120W Printer) 177 Scanner Cable 178 WiFi Adapter USB (300 Mbps) 179 WiFi Adapter USB (600 Mbps) 180 Switching Adapter (Output 9V) 181 VGA Cable 3 Mtr. 182 VGA Cable 5 Mtr. 183 RJ45 Jack connector 184 Anti-Virus 10 user one year (Quick Heal Total Shild/ Avast / QH Anti frud AI ) 185 Anti-Virus 1 user one year (Quick Heal Total Shild / Avast /QH Antifruad AI ) 186 Anti-Virus 1 user one year (Quick Heal Total Security ) 187 Dual-Core Processor 6th Generation 188 Dual-Core Processor 7th Generation 189 Dual-Core Processor 9th Generation 190 Dual-Core Processor 13th Generation 191 Ryzen Processor -3 12th Generation 192 Ryzen Processor -3 13 th Generation 193 Ryzen Processor -5 12th Generation 194 Ryzen Processor -5 13 th Generation 195 Ryzen Processor-7 12th Generation 196 Ryzen Processor-7 13th Generation 197 USB Audio Jack 198 USB Hub 4 Port 199 Mouse Pad 200 i3 Processor 12 generationfor Laptop(HP / Dell / Asus / Lenovo ) 201 i3 Processor 13 generation for Laptop (HP / Dell / Asus / Lenovo ) 202 i5 Processor 12 generation for Laptop(HP / Dell / Asus / Lenovo) 203 i5 Processor 13 generation for Laptop(HP / Dell / Asus / Lenovo) 204 i7 Processor 13 generation for Laptop(HP / Dell / Asus / Lenovo) 205 i9 Processor 13 generation for Laptop(HP / Dell / Asus / Lenovo ) 206 i3 Processor Supported Motherboard (HP / Dell / Asus / Lenovo Laptop) 207 i5 Processor Supported Motherboard (HP / Dell / Asus / Lenovo Laptop) 208 DDR4 RAM-16GB (For Laptop) 209 LED Display -15.6(HP / Dell / Asus / Lenovo Laptop) 210 LED Display -14.1(HP / Dell / Asus / Lenovo Laptop) 211 Laptop Keypad -15.6 (HP / Dell / Asus / Lenovo Laptop) 212 Laptop Keypad -14.1(HP / Dell / Asus / Lenovo Laptop) 213 i7 All-In-One Desktop 22(HP / Dell / Asus / Lenovo) 214 i7 All-In-One Desktop 2212 th GenRAM-8 GB/SSD-512GB/24/(HP / Dell ) 215 i7 All-In-One Desktop 22 12 th GenRam-16 GB/SSD-512GB/24/(HP / Dell ) 216 i7 All-In-One Desktop 2212 th Gen RAM-8 GB/SSD-512GB/24/(Asus / Lenovo ) 217 i7 All-In-One Desktop 2212 th Gen RAM-16 GB/SSD-512GB/24/(Asus / Lenovo ) 218 i7 All-In-One Desktop 2212 th Gen RAM-8 GB/SSD-1 TB/24/(Asus / Lenovo ) 219 i7 All-In-One Desktop 22 12 Gen Ram-8 GB/SSD-512GB/24/ (HP / Dell ) 220 i7 All-In-One Desktop 2212 GenRam-16 GB/SSD-512GB /24/(HP / Dell ) 221 i7 All-In-One Desktop 2212 Gen Ram-8 GB/SSD-512GB/24/(Asus / Lenovo) 222 i7 All-In-One Desktop 22 12 GenRam-16 GB/SSD-512GB /24/ (Asus / Lenovo ) 223 i7 All-In-One Desktop 24(HP / Dell ) Ram-8 GB/SSD-512GB/24/12 Gen 224 i7 All-In-One Desktop 24(HP / Dell ) Ram-16 GB/SSD-512GB /24/12 Gen 225 i7 All-In-One Desktop 24 (Asus / Lenovo) Ram-8 GB/SSD-512GB/24/12 Gen 226 i7 All-In-One Desktop 24 (Asus / Lenovo ) Ram-16 GB/SSD-512GB /24/12 Gen 227 i5 All-In-One Desktop 19(HP / Dell / Asus / Lenovo) 228 i5 All-In-One Desktop 19(HP / Dell ) Ram-8 GB/SSD-512GB/24/12 Gen 229 i5 All-In-One Desktop 19(HP / Dell ) Ram-16 GB/SSD-512GB /24/12 Gen 230 i5 All-In-One Desktop 19 (Asus / Lenovo) Ram-8 GB/SSD-512GB/24/12 Gen 231 i5 All-In-One Desktop 19 (Asus / Lenovo ) Ram-16 GB/SSD-512GB /24/12 Gen 232 i5 All-In-One Desktop 22(HP / Dell / Asus / Lenovo) 233 i5 All-In-One Desktop 22(HP / Dell ) Ram-8 GB/SSD-512GB/24/12 Gen 234 i5 All-In-One Desktop 22(HP / Dell ) Ram-16 GB/SSD-512GB /24/12 Gen 235 i5 All-In-One Desktop 22 (Asus / Lenovo) Ram-8 GB/SSD-512GB/24/12 Gen 236 i5 All-In-One Desktop 22 (Asus / Lenovo ) Ram-16 GB/SSD-512GB /24/12 Gen 237 i5 All-In-One Desktop 24(HP / Dell / Asus / Lenovo) 238 i5 All-In-One Desktop 24 12 Gen Ram-8 GB/SSD-512GB/24/ (HP / Dell ) 239 i5 All-In-One Desktop 2412 Gen Ram-16 GB/SSD-512GB /24/(HP / Dell ) 240 i5 All-In-One Desktop 2412 GenRam-8 GB/SSD-512GB/24/(Asus / Lenovo) 241 i5 All-In-One Desktop 2412 GenRam-16 GB/SSD-512GB /24/(Asus / Lenovo ) 242 i3 All-In-One Desktop 19 12 GenRam-8 GB/SSD-512GB/24/(HP / Dell ) 243 i3 All-In-One Desktop 19 12 GenRam-16 GB/SSD-512GB /24/(HP / Dell ) 244 i3 All-In-One Desktop 19 ,12 GenRam-8 GB/SSD-512GB/24/(Asus / Lenovo) 245 i3 All-In-One Desktop 19 ,12 Gen Ram-16 GB/SSD-512GB /24/(Asus / Lenovo ) 246 i3 All-In-One Desktop 22 ,12 Gen Ram-8 GB/SSD-512GB/24/ (HP / Dell ) 247 i3 All-In-One Desktop 22 ,12 Gen Ram-16 GB/SSD-512GB /24/ (HP / Dell ) 248 i3 All-In-One Desktop 22 12 Gen Ram-8 GB/SSD-512GB/24/(Asus / Lenovo) 249 i3 All-In-One Desktop 22 (Asus / Lenovo ) Ram-16 GB/SSD-512GB /24/12 Gen 250 i3 All-In-One Desktop 24 ,12 Gen Ram-8 GB/SSD-512GB/24/ (HP / Dell ) 251 i3 All-In-One Desktop 24, 12 Gen Ram-16 GB/SSD-512GB /24/(HP / Dell ) 252 i3 All-In-One Desktop 24 ,12 Gen Ram-8 GB/SSD-512GB/24/(Asus / Lenovo) 253 i3 All-In-One Desktop 24,12 Gen Ram-16 GB/SSD-512GB /24/ (Asus / Lenovo ) 254 i3 All-In-One Desktop 26,12 Gen Ram-8 GB/SSD-512GB/24/(HP / Dell ) 255 i3 All-In-One Desktop 26 ,12 Gen Ram-16 GB/SSD-512GB /24/ (HP / Dell ) 256 i3 All-In-One Desktop 26,12 Gen Ram-8 GB/SSD-512GB/24/ (Asus / Lenovo) 257 i3 All-In-One Desktop 26, 12 Gen Ram-16 GB/SSD-512GB /24/ (Asus / Lenovo ) 258 i3Tower Desktop 9th GenerationBranded 259 i3Tower Desktop 10 th GenerationBranded 260 i3Tower Desktop 12 th GenerationBranded 261 i3Tower Desktop 13 th GenerationBranded 262 i5Tower Desktop 9th GenerationBranded 263 i5Tower Desktop 10 th GenerationBranded 264 i5Tower Desktop 12 th GenerationBranded 265 i5Tower Desktop 13th Generation Branded 266 i7Tower Desktop 9th GenerationBranded 267 i7Tower Desktop 10 th GenerationBranded 268 i7Tower Desktop 12 th GenerationBranded 269 i3 Tower Desktop 13 th GenerationBranded 270 All-In One Desktop Display Change (HP / Dell / Asus / Lenovo) 271 RAM-8GB (All in One Desktop Computer HP) 272 RAM-16GB (All in One Desktop Computer HP) 273 i3 Laptop(Dell /HP) Ram-8 GB/SSD-512GB /24 12 th Gen 274 i3 Laptop(Dell /HP) Ram-16 GB/SSD-512GB /24 12 th Gen 275 i3 Laptop(Asus /Lenovo) Ram-8 GB/SSD-512GB /24 12 th Gen 276 i3 Laptop(ASUS /Lenovo ) Ram-16 GB/SSD-512GB /24 12 th Gen 277 i5 Laptop(Dell /HP) Ram-8 GB/SSD-512GB /24 12 th Gen 278 i5 Laptop(Dell /HP) Ram-16 GB/SSD-512GB /24 12 th Gen 279 i5 Laptop(Asus /Lenovo) Ram-8 GB/SSD-512GB /24 12 th Gen 280 i5 Laptop(ASUS /Lenovo ) Ram-16 GB/SSD-512GB /24 12 th Gen 281 i7 Laptop(Dell /HP) Ram-8 GB/SSD-512GB /24 12 th Gen 282 i7 Laptop(Dell /HP) Ram-16 GB/SSD-512GB /24 12 th Gen 283 i7 Laptop(Asus /Lenovo) Ram-8 GB/SSD-512GB /24 12 th Gen 284 i7 Laptop(ASUS /Lenovo ) Ram-16 GB/SSD-512GB /24 12 th Gen 285 i9 Laptop(Dell /HP) Ram-8 GB/SSD-512GB /24 12 th Gen 286 i9 Laptop(Dell /HP) Ram-16 GB/SSD-512GB /24 12 th Gen 287 i9 Laptop(Asus /Lenovo) Ram-8 GB/SSD-512GB /24 12 th Gen 288 i9 Laptop(ASUS /Lenovo ) Ram-16 GB/SSD-512GB /24 12 th Gen 289 Laptop Clener Kit 290 MS Office 365 291 Windows -11Original 292 DVD Ordinary with Pouch 293 DVD Writer ( Branded ) 294 Traffic Equipment 295 Body Camera (Model- Drive Pro) Trascend 296 Body Camera CP PlusHDB 20 (32GB) 297 Battery for Boady Camera (Drive Pro) Trascend 298 Battery for Body Camera CP PlusHDB 20- (32 GB ) 299 Power Adapter (USB Type C Cable) Trascend 300 Power Adapter (USB Type C to Type A) Trascend 301 Traffic Fluorecent Jacket 302 5 Mode Traffic Baton Light with Charger (Rechargable) 303 LED Jacket for Traffic Duty 304 LED Flashing Shoulder Light for Traffic Police 305 Traffic Helmet (Best Quality) 306 Officer Helmet (Best Quality) 307 Wheel Clamp (Best Quality) 308 Search Light (Best Quality) 309 Traffic Road Blinker (Best Quality) 310 Traffic Raincoat 311 Traffic Boot (Size as per requirment) 312 Traffic Umbrella (Big size) 313 AC Machine Accessories 314 2-Ton Composer of AC machine ( Best Quality ) 315 1.5-Ton Composer of AC machine ( Best Quality ) 316 1-Ton Composer of AC machine ( Best Quality ) 317 2-Ton Copper Cool Condenserof AC machine( Best Quality ) 318 1.5-Ton Copper Cool Condenser of AC machine ( Best Quality ) 319 1-Ton Copper Cool Condenser of AC machine ( Best Quality ) 320 2-Ton New Motor Condenser of AC machine( Best Quality ) 321 1.5-Ton New Motor Condenser of AC machine ( Best Quality ) 322 1-Ton New Motor Condenser of AC machine ( Best Quality ) 323 2-Ton New Indoor Motor of AC machine( Best Quality ) 324 1.5-Ton New Indoor Motor of AC machine ( Best Quality ) 325 1-Ton New Indoor Motor of AC machine ( Best Quality ) 326 2-Ton Running Capacitor of AC machine( Best Quality ) 327 1.5-Ton Running Capacitor of AC machine ( Best Quality ) 328 1-Ton Running Capacitor of AC machine ( Best Quality ) 329 2-Ton Relay of AC machine( Best Quality ) 330 1.5-Ton Relay of AC machine ( Best Quality ) 331 1-Ton Relay of AC machine ( Best Quality ) 332 2-Ton PCB of AC machine( Best Quality ) 333 1.5-Ton PCB of AC machine ( Best Quality ) 334 1-Ton PCB of AC machine ( Best Quality ) 335 Ranar for2-Ton AC machine ( Best Quality ) 336 Ranar for1.5-Ton AC machine( Best Quality ) 337 Ranar for1-Ton AC machine( Best Quality ) 338 Fan for 2-Ton AC machine ( Best Quality ) 339 Fan for 1.5-Ton AC machine ( Best Quality ) 340 Fan for1-Ton AC machine ( Best Quality ) 341 Split AC 1-Ton 3 star(VOLTAS /CARRIER/DIKIN) 342 Split AC 2 -Ton 3 star (VOLTAS /CARRIER/DAIKIN ) 343 Split AC 1.5 -Ton 3 star (VOLTAS /CARRIER/DAIKIN) 344 Quoted Rate in Figures

BRR:7515519 Supply And Installation Of Solar Street Light From The Head Of Amoresh Biswas, Head Of Avijit Biswas, Head Of Sujit Biswas, Head Of Sufal Biswas, Head Of Amal Biswas, Head Of Sukhen Biswas And Indaramore At Charshambhunagar Biswaspara San - Vi Under Ruipukur Gp

BRR:7515464 Supply And Installation Of Solar Street Light (5 Nos) Within Samsad No.- Ii Under Dakshin Bara Haldibari Gram Panchayat.

BRR:7515463 Supply And Installation Of Solar Street Light (5 Nos) Within Samsad No.- Iii Under Dakshin Bara Haldibari Gram Panchayat.

BRR:7515462 Supply And Installation Of Solar Street Light (5 Nos) Within Samsad No.- Iv Under Dakshin Bara Haldibari Gram Panchayat.

BRR:7515343 Construction Of Solar Street Led Bulb Light Each Of 25 Watt Along With Street Light Pole Near Gp Office To Paritosh Das House Side At Tilkhojat Concrete Road 39 To 45 No Sansad Area At Tilkhoja Gram Panchayat- Construction Of Solar Street Led Bulb Light Each Of 25 Watt Along With Street Light Pole Near Gp Office To Paritosh Das House Side At Tilkhoja

BRR:7515341 Construction Of Solar Street Led Bulb Light Each Of 25 Watt Along With Street Light Pole Near Rathtala Bazer To Bag Culvert At Tilkhoja

BRR:7515264 Installation Of Solar Light At Pukhuria And Mahatpur Sansad No I, Iii,Vi,V,Xvii, Under Mahatpur G.P

BRR:7515042 1.Various Safety Accessories At Ht N Lt Overhead Line 2.Ht Straight Through Cable Jointing At Ug Of Jk Pit Of Siduli Colliery. 3. Illumination Of Coal Transportation Roadways 4. Renovation And Installation Of Led Luminaries With Pole Light Set 1.Various Safety Accessories At Ht N Lt Overhead Line 2.Ht Straight Through Cable Jointing At Ug Of Jk Pit Of Siduli Colliery. 3. Illumination Of Coal Transportation Roadways 4. Renovation And Installation Of Led Luminaries With Pole Light Set

BRR:7514918 providing illumination and street light with all associated work including 3 years DLP of LED Flood/street lights (on site replacement) free of cost and maintenance and ON/OFF free of cost for 1st year and at Labour rate for remaining 2 Years, in Commercial site (Opp. Shubham Garden) sec-15, Sonipat.(Excluding GST) A/C

BRR:7514917 Providing 12.5 Mtr. Long High Mast With 200W Led Flood Lights In Parking Of Commercial Center Sector-9, Bahadurgarh

BRR:7514837 Supply And Installation Of Decorative Lighting With Bollards And Flood Lights Etc At Bhagwant Garden Indore Under Imc

BRR:7514835 Supply And Installation Of Decorative Lighting With, Bollards And Flood Lights Etc At Maharana Pratap Garden Supply And Installation Of Decorative Lighting With, Bollards And Flood Lights Etc At Maharana Pratap Garden, Indore Under Imc

BRR:7514465 Providing And Supplying Various Materials Providing And Supplying Various Materials At Changephal Tq Sidhkhed Raja Dist Buldana , Handicap Wheel Chire (For Handicap) , Handicap Walker , Fogging Machine , 20 W Led Light , 18 W Led Light , 24 W Light , Fingerprint Time & Attendance Device , Biometric Fingerprint Scanner Machine , Plastic Pedal Garbage Waste Dustbin 70 Ltr. , Stainless Steel Taki /Kothi/Leak Proof/Kitchen Storage/Atta /Grains 60 L Drum , Shoe Stand , Thor Netyanche Photo Frame All , Stainless Steel Round Handa, For Home , Hospital Bed , Computer Table , Window Curtains , Door Curtains , Wall Watch , Kids Seesaw Toy , Kids Pyramid Ring , Toy Drum , Puzzle , Kids Ball , Toy Horse , Toy Blocks , Skipping Rope , Chess Mat With Chess Coins , Sponge Rubber Ring , Carrom , Cub , Plastic Chatai Mat , Plastic Aasan Patti , Broom , Door Mat , Big Parat , Polpat Beln , Aarsa , Kangva , Steel Backet , Steel Jag , Steel Oil Cattle , Floor Cleaning Mop With Bucket , Steel Dabba , 36 W Led Street Light , 1 Meter Wire 1Mm , Holder (1 Nos) , Clamp And Pipe Set , Bleachingpowder(Tcl) 25 Kg Bag , Weighing Scale 100Kg And Above , Hight Chart , Infrentometer , Stadiometer With Weighing Scale , Weighing Scale For Baby , Aakar Khelni Sanch 0 Te 5Yr With Chart , Anganwadi Karita Kothi 100 Kg , Anganwadi Karita Kothi 50 Kg , Kapat 4X3 Size , Kapat 7X3 Size , Cooker 10Kg , Cooker 25Kg , Palte Pavbhaji , Water Glass Ss , Table 2X4 Size , Plastice Chair , Hand Wash Station 1 Besin , Hand Wash Station 4 Besin , Led Smart Tv 32 , Led Smart Tv 40 , Led Smart Tv 50 , Cricket Set (2 Bat , 6 Ball, 2 Pair Stamp, Hand Glos 3 Pair, Pad 3 Pair , Helmet 3 Pair) , Sound System Trolley Speaker With 2 Wireless Mic(12) , Foot Ball , Pen Drive 64 , Medical Kit (Oximter, Turmameter, Bandez, Iodine,Cipladim) , B P Aprates (Isi Mark) , Saniterypad (6 Nos Set) , Suger Test Kit (Isi Mark) , Bebi Powder (Jonsun Baby) , Bebi Powder (Himalay) , Machardani For 0 Te 1 Yr Baby , Tharmameter , Preganews Kit , Kadahi 10Kg , Bhagune 10Kg , Baket 10Ltr , Topile 5 Kg , Bhat Wadi , Vaghral , Kavcha , Mat 12X20 Size , Mat 6X10 Size , Computer Set (500Gb Hhd,4Gb Ram, I3 Processer With Keybord Mouse, Vga And Power Supply) 1 Year Warranty , Moniter 22 , Moniter 15 , Laptop (1Tb Hhd,4Gb Ram, I3 Processer) 1 Year Warranty , Small Tractor For Rent Per Day With Fawarni Yantra With Driver , Deltafog 1 Ltr , Deskbench Small Size 1 To 5 Year Childern , Babay Chire 40X32x30x20 Size , Slide 58X18x36x54 Size , Super Swing 30X33x43 , Book For Laburary (1 Set Samaj Sudharak Yanche 5 Book, Bharat History 1Book, Othe R4 Book ) 10 Book Set , Water Jar 18 Ltr , Plastic Tank 500 Lit , Balnket , Automatic Sanitary Napkinvending Mashine , 36 W Solar Light Inbuild Battary , 75 W Panel, Arm Bracket 6 M Gi Pole ( All Set ) , Minral Water Pot , Hikvision 16 Channel Dvr With 5 Mp ,6 Bullet &10 Drone Cameras With Audio Recording + 4Tb Hdd+ (3+1) Cable Roll+16 Ch Pawer Supply+ Usewell Bnc & Dc Full Combo Kit , Musical Harmonium , Tabla Set , Dholki , Bansuri , Damru , Walking Crutch , Walking Stick , Hearing Mashine , Trueview 3+3Mp 4G Mini Pt Solar Powered Linkage Security Camera, 1296P Advanced Cctv Surveillance Solution, Outdoor Camera, Water Proof, 2 Way Talk , Ceiling Fan , Wall Fan , Childer Dress 1 Yr , Childer Dress 2 Yr , Childer Dress 3 Yr , Childer Dress 4 Yr , All In Printer , Wheel Chare

BRR:7514417 Tender For Providing And Erecting Solar Street Light At Takali Tal.Malegaon Dist.Nashik

BRR:7514309 Tender For New Solar Light High Mass At Jiyara Near Durga Mandir

BRR:7513860 Installation Of Solar Light Near Bhabanipur Nayatola More Under Wbpdcl Csr At Bhabanipur Under Mahendrapur G.P.Installation Of Solar Light Near Bhabanipur Nayatola More Under Wbpdcl Csr At Bhabanipur Under Mahendrapur G.P. Installation Of Solar Light Near Bhabanipur Nayatola More Under Wbpdcl Csr At Bhabanipur Under Mahendrapur G.P.

BRR:7513858 Installation Of Solar Street Light Near I) Gabberia Molla Para Kabarstan,Ii) Dandapat Para Shiv Mandir, Iii) Mallik Para Jame Masjid, Iv) Dosotina Pwss, V)Head Of Abusiddik Mondal, Vi) Head Of Salauddin Molla, Vii) Head Of Akkash Sk, Viii) Head Of Nesar Ali Mallik,

BRR:7513610 Bids Are Invited For Solar Street Lighting System (Ntpc) (Q3) Total Quantity : 111

BRR:7513466 Bids Are Invited For Supply Of 95 Double Dome Ceiling Ot Light As Per Specification Attached , Ceiling Ot Light Total Quantity : 2

BRR:7513252 Bids Are Invited For Inst. Flame Proof Jb 12 Pair , Flameproof Plug, Socket And Hand Lamp-Is:5, Is:1248 Total Quantity : 70

BRR:7512628 Bids Are Invited For Electro Hydraulic Bollards,Tyre Shredder Or Axle Breaker,Drop Arm Barrier,Acessories,Installation Total Quantity : 8

BRR:7512231 Bids Are Invited For Electrification Of New Iq At Jaigad Lighthouse Modular Gi Box With Modular Base And Cover Plate , Modular Switch , Modular Socket Outlet , Tv Antenna Socket Outlet , Bell Push , Modular Blanking Plate , Angle Holder , 3 Pin 5A Ceiling Rose , Ceiling Fitting , Call Bell , Light Fittings , Exhaust Fan , 25A Modular Sp Mcb , Pvc Conduit , Frls Pvc Insulated Copper Conductor Single Core Cable , Coaxial Tv Cable , Laying Charges , 3 Phase Mcb Distribution Board , Miniature Circuit Breaker , Four Pole Rccb , Spn Industrial Type Socket Outlet , Earthing With Copper Earth Plate , Earth Connection From Earth Electrode , Battery Charger , Power Cable , Recess Led , Led Lamp , Led Tube Light , Alluminium Bulkhead Light , Wall Mounted Fan , Mirror Light , Holder , Air Conditioner Unit , Single Phase Voltage Stabiliser , Electric Geyser , Washing Machine , Refrigerator , Dth , Television 15W Round Recess Led Light, Supplying And Installation Of , Earthing Plate As Per Is 3043 Total Quantity : 1803

BRR:7512063 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System (Q3) ((3 3 )) 9 Lakh (S) Total Quantity : 2

BRR:7512062 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) , Led Luminaire For Floodlight (V2) Conforming To Is 10322 (Part 5Section 5) (Q3) ((3 3 )) 6 Lakh (S) Total Quantity : 25

BRR:7511937 Bids Are Invited For Led Bulb Pvc Insulated Aluminium Cable Twin Core , Led Flood Light With Clamp , Switch One , 3 Pin Top One , 3 Pin Top Two , Capacitor , Pvc Gang Box , Insulating Tape , Switch Two , Socket One , Socket Two , Led Bulb , Inverter Led Bulb , Electronic Meter Pvc Insulated Aluminium Cable Twin Core (10 Sq Mm), Led Flood Light With Clamp (50 Watt), Switch 6 Amp Pt, 3 Pin Top 16 Amp, 3 Pin Top 06 Amp, Capacitor 2.5 Mfd, Pvc , Led Bulb With Battery As Per Is 16102 Total Quantity : 808

BRR:7511901 Electrification And Maintenance Work Of (Office Building, Farmer Rest House, Canteen, Check Post, Sulabh Complex, Main Gate, Covered Shed, Trolley Shed, Pole Lights And High Mast ) At Mandi Yard Silwani

BRR:7511774 Bids Are Invited For Solar Water Heating System As Per Is 12976:1990,Solar Street Lighting System (Ntpc) Total Quantity : 143

BRR:7511731 Bids Are Invited For Mt Spares Grommet Timing Belt , Cover Fuse Box , Air Pressure Horn Relay , Reverse Light Switch , Side Door Glass , Spl Hose 0.375 Inch , Arm Wind Screen Wiper Sa Of Wiper And Blade , Rear View Mirror , Assy Wiper Blade , Assy Tail Light Four Chamber , Assy Tail Light Lh Or Rh , Fuel Filter , Light Assy Indicator Front , Blinker Lamp Rh 24V , Hose Pipe , Wiper Blade , Oil Filter Assy Grommet Timing Belt , Cover Fuse Box, Air Pressure Horn Relay , Reverse Light Switch, Side Door Glass, Spl Hose 3-8 Inch, Arm Wind Screen Wiper S-A Of Wiper And Blade, Rear , Oem Spares For Automobiles Total Quantity : 76

BRR:7511593 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System Total Quantity : 10

BRR:7511199 Tender For Ayurveda Sub Centre Electrification Puramattom G P - Ayurveda Sub Centre Electrification - Annual Plan-PURAMATTOM GP-AYURVEDA SUB CENTRE ELECTRIFICATION-General Electrical Work Sl. No. Item Description 1 PART 1- ELECTRIFICATION. ( List of materials used for the work approved by the DLTCE under LSGD Pathanamthitta is attached as separate document) 2 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point 3 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point 4 90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point 5 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points 6 OD287256/2024-2025:Supply and fixing cast aluminium stove enameled bulk head fitting with deep drawn anodised aluminium body, epoxy powder coated, heat resistant prismatic glass cover with 9 W LED to wall / ceiling including giving connections with required length of 16/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor fle x wire conforming to relevant ISS or extending the original wiring and making good the surface as required.(Mepro /Philips/Crompton/Bajaj make) 7 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 8 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 9 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture 10 OD287270/2024-2025:Supply, installation, testing and commissioning of recess mounting type Square LED panellight fittings 300 mm x 300mm square with light weight & energy efficient drivers 22W 6500K /4000K/30CCT,greater than 110 lumens per watt system output 50000 burning hours Ripple less than 5%, 130/320 voltage range of Crompton / Philips/Dewtonor equivalent make 11 90.4.2:Supply and installation of suitable size MS belt type fan clamp fabricated from flat iron 40 x 6 mm, 150mm long x 2 Nos with M.S. rod bent to shape, neatly painted with 2 coats of enamel paint over a coat of red oxide primer as per IS 732 as required. 12 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply 13 1.48:Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored) 14 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 15 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm 16 1.17.2:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 1.5 sq. mm 17 1.17.4:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 1.5 sq. mm 18 1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm 19 1.17.13:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 2.5 sq. mm 20 1.17.15:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm 21 1.17.31:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.4 x 6 sq. mm 22 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 23 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 24 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 25 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 26 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 27 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 28 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 29 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) 30 90.11.1.14:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) 31 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 32 2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 33 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 34 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 35 90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) 36 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 37 90.16.2.1:Supply and laying of the following sizes of B class GIpipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class) 38 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) 39 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 40 OD287261/2024-2025:Supply and providing 12x3 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 41 OD287259/2024-2025:Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required 42 OD287258/2024-2025:Supply and providing anchor bolt hook type on wall /parapet for binding KSEB Service connection cacable as required. 43 OD287398/2024-2025:Charges for preparing drawing of the complete Electrical installation after completion of the present work and preparing completion report with KSEB service connection application form and submitting to the consumer for availing 3 phase service connection/Load regularization 44 OD287399/2024-2025:Supply & installation of dust and vermin proof, wall mounting, Sintex meter box of size 515x240x145mm suitable for fixing KSEB meter,fuse units etc, hinged door construction for the front side with compartments if necessary, providing vision panel for the meter compartment, knock out for cable entry and exit.(GSMB-5628)with base plate suitable to fix three phase energy meter and fix to fix in the box Three set of 63 A,415 V HRC bakelite fuse fitting with HRC fuse link,63 A 2 way neutral link etc

BRR:7511011 One Panchayath One Playground - Development Of Playground At Gvhss, Nandikkara In Prappukkara Grama Panchayath In Puthukkad Lac, Thrissur - Retender Mud Football Court, Mud Volleyball Court, Mud Kho-Kho Court, Mud Badminton Court, Fencing, Step Gallery, Drain, Toilet Cum Office Room, Long Jump Pit, Inauguration Stone, Flood Lighting And Connected Works, Electrification - Toilet Cum Office Room

BRR:7510834 Tender For Providing And Erecting Solar Street Light Pole At Z.P Primary School Bundhate Tal Satana Dist Nashik

BRR:7510781 Tender For Provision Of 02 X Training Shed At Fatehgarh; 1 M & L for surface dressing n.exc. 15 cm deep and getting out in soft/loose soil complete all as specified and directed. 2 Excavation over areas, n exc 1.5 m deep for foundation and getting out in soft/loose soil complete all as specified and directed. 3 Excavation over areas,exc 1.50 m but not exc.3 m depth for footing in soft/loose soil etc cpmplete all as specified and directed. 4 Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm of soft/ loose soil complete all as specified and directed. 5 Removing excavated material (soil) n. exc. 50 m and depositing where directed at alevel n. exc. 1.5m above the starting point etc complete all as specified and directed. 6 M & L for PCC 1:3:6type C-2 (using 40 mm graded stone aggregate) as infoundations, filling and mass-concrete etc complete all as specified and directed. 7 M & L for RCC M-25 design mix (using 20 mm graded stone aggregate ) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed. 8 M & L for RCC M-25 design mix (using 20 mm graded stone aggregate)as in Columns, pillars, piers, posts and struts etc completeall as specified and directed. 9 M&Lfor RCC M-25 design mix (using 20 mm graded stone aggregate)as in Beams, cantilevers, bressummers, lintels over 1.5m span etc completeall as specified and directed. 10 M & Lfor RCC M-25 design mix (using 20 mm graded stone aggregate)as in Chajjas, Gutteretc completeall as specified and directed. 11 `M & LforRCC M-25 design mix (using 20 mm graded stone aggregate )as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves etc completeall as specified and directed. 12 M & Lfor RCC M-25 design mix (using 20 mm graded stone aggregate )as in stair ways including steps (square or spandril), string pieces, carriages, etc., complete, any section straightetc completeall as specified and directed. 13 M & L for flat, rough finished surface formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batteretc complete all as specified and directed. 14 M & L for for flat, rough finished surface form work as in sides of columns etc complete all as specified and directed. 15 M & L for for flat, rough finished surface form work as in roof beams ,lintel and intermediate beametc complete all as specified and directed. 16 M & L for flat, rough finished surface formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick(Horizontal or sloping etc complete all as specified and directed. 17 M & L forflat, rough finished surface formwork to chullah hoods, chajjas, Gutter and similar items including edgesetc complete all as specified and directed. 18 M & L for rough finished surface formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) etc complete all as specified and directed. 19 S & F for roof trusses (framed),crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed. 20 S & F for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc conforming to Fe 410-W (Gde E-250) quality B complete all as specified and directed. 21 S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. 22 S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge/valley gutter roof covering/ cladding to wall, fixed with self tapping screws as specified and directed. 23 S&F MS Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment (Fe 410-W (Gde E- 250) quality A ) complete all as specified and directed 24 S&F Mild steel screw bolts of 16-20 mm dia and length of bolt exc 5cm but n exc 10cm long (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square complete all specified and directed 25 M & L for preparation of new or previously untreated surfaces of steel over a coat of red oxide primer over and encluding two coat of synthetic enamel paint, surface of any description over 10cm in width or girth, not otherwise described complete all as specified and directed. 26 M & L for rendering 15 mm thick in CM 1:4 on bricksurfaces fair finished even and smooth without using extra cement complete all as specified and directed. 27 M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces fair finished even and smooth withoutusing extra cement complete all as specified and directed. 28 M & L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over one coat of putty complete all as specified and as directed. 29 M & L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc all as specified and directed. 30 M & L for PCC 75mm thick1:3:6 type C-1using 20 mm stone aggretate as in plinth protection including joint fillingand coarse sand mixture. 1:3 (by weight) at the joints complete all as specified and directed. 31 M & L hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface(Broken stones / boulders) etc complete all as specified and directed. 32 M & L for 75 mm thickPCC, 1:4:8 type D-2,(40mm graded stone aggregate) as in base /sub base of floor complete all as specified and directed. 33 M & L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed. 34 M & L for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders etc complete all as specified and directed. 35 M & L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 etc all as specified and directed. 36 M&L for machine cut kota stone with mirror polishingforflooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete.Including Screed bed or bedding layer of mortar 20 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. 37 M&Lfor green marble 18 to 20mm thick(table rubbedand polished)in steps,jambs,pillars, window cills, cooking platforms and border of kota stoneincludingpointing in white cement (1:2) usingmarble dust with admixture of pigment to match with marbleshadeincluding 15mm screed bed in cement mortar (1:4)complete all as specified and directed. 38 M&Lformarble matching with platformcolour 18 to 20mm thick(table rubbedand polished)in riser and vetrical face of brick /RCC wall includingpointing in white cement (1:2) usingmarble dust with admixture of pigment to match with marbleshadeincluding Rendering 10 mm thick in cement mortar (1:4)on fair faces of brick work or concrete surfaces complete all as specified and directed. 39 M&L for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, includingfixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed 40 S&F 15 mm bore tubes medium grade galvanised, with all fitting and fixed complete to wall and ceilings or laid in floor complete all as specified and directed. 41 S&F 20 mm bore tubes medium grade galvanised, with all fitting and fixed complete to wall and ceilings or laid in floor complete all as specified and directed. 42 S&F rotational moulded polyethylene water storage tanks 1000 ltr capacity in triple layer (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT Float valve complete all as specified and directed. 43 S&F gun metal glove or gate valve with iron wheel head, screwed both ends for 20 mm iron pipe and fixed screws complete all as specified and directed. 44 S&F15 mm dia bore stop angle cock chromium plated screwed down high pressure with crutch or butterfly handle,screwed both ends for iron pipe or for unions complete all as specified and directed. 45 S & F PVC ( SWR )pipe 75 mm dia single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. 46 S&F 110 mmbore PVC(SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. 47 S&F 110 mm bore PVC(SWR) bends any radius complete all as specified and directed. 48 S&F 75 mm bore PVC(SWR) bends any radius complete all as specified and directed . 49 M&L 75 mm dia. PVC floor trap with grating including joining to waste pipe fixed in solvent cement complete all as specified and directed. 50 S&Fvitreous chinawash hand basins, white , flat back of size 550 x 400 mm including 32mm bore waste coupling chromium plated including 32mm bore pvc waste pipe including fixing cantilever brackets connection unions to pipes etc fixed complete all as specified and directed . 51 S&F 15 mm bore bib taps fancy type cast copper alloy chromium plated long shank with crutch or butterfly handle screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed. 52 S&FPVC connnection 15mm size with PTMT nuts of length 450mm long complete all as specified and directed. 53 S&F 15mm bore pillar tap fancy type cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. 54 S&Fvitreous china urinal, half stall type (white) with grating and union for discharge pipe, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and directed. 55 S&F vitreous china urinal partition white of size 310 mm X 700 mm complete all as specified and directed. 56 M&L PCC 1:3:6 type C-2 (using 40 mm graded stone aggretate) concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested for 10 mm bore pipe complete all as specified and directed. 57 M&L for salt glazed stone ware drain pipes grade A of size 100 mm laid in trenches and jointed in CM (1:1) complete all as specified and directed. 58 M&L for non- kid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and directed. 59 M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10mm thick CM 1:3 on fair faces of brick work or concrete surfaces complete all as specified and directed. 60 S&F solid PVC door frame of size 50mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, as per SSR specification all as pecified and directed. 61 S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails, MS frame shall be covered with sheet molded plain colour PVC sheet fixed with 20mm width sturck in side with solvent cement for style and plain colour PVC sheet for top rail, lock rail and bottom rail on either side as in gap insert for top rail, botttom rail paneling or plain colour PVC sheet beading and jointed together with solvlent cement, fixing in the frame at site as per SSR specificationcomplete all as specified and directed. 62 S&F 150 mm aluminium anodized, barrlel tower bolts of extruded section complete all as specifed and directed. 63 S&F 200 mm long aluminium anodized, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. 64 S&F 100 mm long butt hinges, cast brass,with mild steel hinge pin, bright polished and fixed, type B-11 with steel screws as in pvc door complete all as specifed and directed. 65 S&F Steel windows or ventilators, fixed type, with glazing barscomplete all as specified and directed. 66 S&F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm complete all as specified and directed. 67 S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. 68 S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in steel window/ventilator complete all as specified and directed. 69 S&F 100mm aluminium handles, fabricatd type, anodised complete all asspecified and directed. 70 Surface excavation n.exc 35cm deep and averaging cm and averaging 15cm deep and getting outin soft/loose soil complete all as specified and directed 71 Rolling and consolidating formation surfaces in cutting with power roller exc 8 ton but n exc 12 ton complete all as specified and direcetd 72 M&L for soling (or sub base) 150mm thick (spread thickness) with granite, trap or basalt broken boulders or quarried stones, interstices filled, surface and rolled and consolidated to required gradient and camber 73 M&L for WBM 150mm thick (compacted thickness) in two layers of 75mm each with course aggregate of grading II (63 to 40mm) size, spread, leveled and rolled and consolidated to required gradient and camber using grainite, trap or, basalt stone complete all as specified and directed 74 M&L for preparing unsurfaced WBM surface by wire brushing with wire brushed for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dust etc complete all as specified and directed. 75 M&L for applying evenly a priming tack coat with bituminous primer @ 10Kg/10Sqm using paving bitumen complete all as specified and directed. 76 M&L for 75 mm thick (consolidated thickness) premix bituminious macadam with 4% binder contentusing paving bitumen of VG-30 grade by weight of total mix laid / rolled and compacted to required camber and gradient complete all as specifiied and directed.Note : (a) Premix bituminious macadam shall be obtained from hot mix plant and spreading shall be done with mechanical paver and asphaltic dense concrete work shall be done within 48 hours after completion of rolling and consolidation of bituminious macadam. (b) Contractor shall quote his rate on the basis of binder as mentioned in above item.If there is any variation in the actual binder content used,the rate shall be adjusted @ Rs. 45/- per Kg of the binder used.However no price adjustment shall be made if the binder content workout to more as specified in shedule A. 77 M&L bituminous premix asphaltic dense concrete 40mm consolidated thickness with 5.5% binder using paving bitumen content by weight of total mix, rolled and compacted to required camber and gradient complete content by weight of total mix rolled and compacted using 8 to 10 tonne capacity power road roller to achieve the required compaction camber and gradient complete all as specified and directed. 78 M&L continuous brick edging; with width equal to the depth of the brick, of whole sub-class B Bricks old sizelaid on end vertically complete all as specified and directed. 79 Removing excavated material (hard/dense soil) to a distance exceeding 50m and not exceeding 100m& depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. 80 Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed. 81 M & L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. 82 Surface excavation n. exc 30 cm deep and averaging 15 cm thick in soft/loose soil etc complete all as specified and directed. 83 M&L for 75mm thick PCC 1:4:8 type D-2(using 40 mm graded stone aggregate) as in lean concrete etc complete all as specified and directed. 84 Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of requiredshape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.etc complete all as specified and directed. 85 M&Lfor PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in kerb, benching etc complete all as specified and directed. 86 Excavation in trenches not exceeding 1.5 mtrs wide and not exceeding 1.5 mtrs in depth for foundation, etc or for shafts, wells, cesspits, manholes, laying of cables including getting out in soft/loose soil complete all as specified and directed. 87 Cutting existing CI/GI pipe line 40 mm dia for insertion of tee of size 40 x 40 x 40 mm for branch connection including excavation and earth work complete all as specified and directed. 88 Cutting existing CI/GI pipe line 40 mm dia for insertion of tee of size 40 x 40 x 25 mm for branch connection including excavation and earth work complete all as specified and directed. 89 Supply and fixing for 40 mm bore galvanised steel tubing, medium grade with all fittings and fixed to wall, ceilings or laid in floor, trenches complete all as specified and directed. 90 Supply and fixing for 25 mm bore galvanised steel tubing, medium grade with all fittings and fixed to wall, ceilings or laid in floor, trenches complete all as specified and directed. 91 Supply and fix gun-metal, globe or gate valvs, 25 mm dia with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. 92 S&F Mild TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bendingand binding with the mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed 93 M&L pre-cast RCC 1:2:4 Type B-1 (20mm graded stone aggregate) as in cover slab for drain and similar work complete all as specified and directed 94 M & L PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate)as in bed of surface channel of drain including providing necessary formwork complete all as specified and directed. 95 M&L extra for forming fair finished drain or channel 30 cm inner girth in cement concrete,using extra cement including forms,moulds, mitred/stopped ends etc. complete all as specified and directed 96 Removing excavated material exc. 100 m but n exc. 200 m and depositing where directed complete all as specified and directed. 97 M&L for soakage wells of size (3.0 M dia x 4.5 M effective depth) including excavation, in any type of soil, foundation in PCC 1:3:6 type C-1 (using 20 mm graded stone aggretate), walls of honey combed masonary in CM 1:4 with cover slab of M-25 precast concrete/SFRC cover, top ring RCC 1:2:4 type B-1 (using 20 mm graded stone aggretate), including intercepting chamber and screen chamber made ofbrick masonary in CM,interconnecting pipes of RCC/DWC complete filled with brick bats complete all as specified and directed. 98 Excavating post holes in soft/Loose soils (or similar holes ) nexc 0.50 Cum each and getting outand returning filling in balance portion (after PCC filling Ref note given below) with boulder and mixed with earthin layers exceeding 25 Cm thick complete all as specified and directed. 99 S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc; half round or other stock section, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. 100 Supply and fixing mild steel in flat,round or square bars in available legth complete all as specified and directed. 101 M & L for PCC 1:4:8 type D-2 (40mm gradedstone aggregates) in foundation filling and mass concrete complete all as specified and directed 102 M&L for RCC 1:2:4 type B-1, (20mm graded stone aggregate), nominal mix in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. 103 M & L for preparation of new or previous untreated steel and ironsurfaces of anyn. exc 10 cm in width or girth and applyingtwo coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed . 104 S&F for GIbarbed wire 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm barbs at 75 mm spacingand shallconfirming to IS-278-2001 &IS-280-2006 and straining and fixing to any type of standrad rails straining bolts including securing or tying at crosssing with and provision of Galvanized mild steel wire, staples or steel pins etc as directed complete all as specified and directed. 105 Supply only chain link MS galvanised fencing weight not more than 4 Sqm any size or type complete all as specified and directed. 106 Fixing only chain link fencing including line wires ,any mesh and any type of standrads rails, straining bolts etc including provisioning of binding wire complete as directed. 107 Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 Cm long but not exceeding11 to 15mm dia of neck complete all as specified and directed. 108 M&L for 5.5m steel gate complete all as shown on drg No. TD/104/11 complete all as specified and directed. 109 M&L for point wiring complete forOne light/Fan/Exhaust fan/Bell pointcontrolled by one switch with PVC insulated and unsheathed FRLSH cable 1.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable, 1100 volt grade including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 1.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and complete all as specified and directed.Note :-(i) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. (ii)The quoted rete is deemed to be included for the chases cutting. (iii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. 110 M&L for point wiring complete for One 5 pin 5 Amp switch socket out let point on an independent board with PVC insulated and unsheathed FRLSH cable1.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 1.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories complete for max four nos socket outlets all as specified and directed. Note :-(i) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. (ii)The quoted rete is deemed to be included for the chases cutting. (iii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. 111 M&L for point wiring complete for One 5 pin 5 Amp switch socket out let point on an same board with PVC insulated and unsheathed FRLSH cable1.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable 1100 volt grade, including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 1.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories complete for max four nos socket outlets all as specified and directed. Note :-(i) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. (ii)The quoted rete is deemed to be included for the chases cutting. (iii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. 112 M&L for point wiring complete forOne light/Fan/Exhaust fan/Bell point on an independent board controlled by one switch with PVC insulated and unsheathed FRLSH cable2.5 sqmm (nominal area), ISI marked,multi stranded copperconductor cable 1100 volt grade, including ISI marked not less than 20mm dia medium grade PVC conduit concealed in wall , MS conduit in roof/floors, factory made pressed steelconcealed terminal boxes not less than 1.6mm thick of reqd size and with top cover 3mm thick of plastic laminated sheets of required colour complete,including 2.5 Sqmm PVC ,FRLSH cableinsulated unsheathed multi stranded copper earth wire to the common earth and connecting to earth dolly,including colour coding of cable shall be Phase-red,Neutral-black and Earth- green with all accessories and complete all as specified and directed.Note :-(i) In case of roof/ceiling, heavy duty PVC pipe shall be used without any extra cost. (ii)The quoted rete is deemed to be included for the chases cutting. (iii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. 113 S&F switch flush type 5/6 Amps single pole one way complete all as specified and directed. 114 S&F Socket outlet, flush type 2 in 1, 3 pin, 5/6 Amps complete all as specified and directed. 115 S&F Switch socket combination 2 in 1flush type 5/6 Amp 5 Pin complete all as specified and directed. 116 S&F Switch socket combination 5 in 1, 15 Ampflush type complete all as specified and directed. 117 Supply and fix electronic fan regulator 5 stepped type complete all as specified and directed 118 S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed. 119 M&L submain wiring with two single core 6 sqmm FRLSH copper conductor, PVC insulated, multistranded, unsheathed cable ISI marked drawn in PVC conduit concealed in wallsurface / ceiling for sub main connection including one 6 sqmm FRLSH one single core PVC insulated multistranded unsheathed copper conductor used as earth wire to common earth and connection to earth dolly complete all as specified and directed. Note:- Two single core 6 sqmm copper conductor for phase / neutral, one run PVC conduit and one run of 6 sqmm earth wire shall be considered & measured as one unit. 120 Supply and fixing of VTPN DB 12 way suitable for Mounting MCCB as Incomer of rating 100 Amp with suitablerated bus bar having IP-43 protection and double metal door includingMCCB 100 Amps, AC, 415 Volt, 4 Pole, 16 KA with thermal magnetic trip unit (TMTU) adjustable thermal setting 0.7 - 1 x In, class II front face, Ics = 100% Icu as per IS/IEC 60947-2 including connection with aluminium thimbles as required complete all as specified. 121 Supply and fixing of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified. 122 S&F of MCB SPN 40-63 Amp 240 volt Ccurve 10 KA complete all as specifed and directed. 123 S&F of MCB SP 10 to 32 Amp 240 Volt C curve 10 KA complete all as specified and directed. 124 Supply and fixing LED lights fitting 4 Ft, 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. 125 S & F building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose with bracket size made of GI pipe medicum grade 40 mm dia 1.5 mtr long bend to shape as required and fixing with two nos MS Clamp of size 40x6 mm for fixing of builiding security light fittings completed all as specified and directed. 126 Supply and fixing ceiling fans complete with blades, down rods (as per site requirement), electronic regulator and accessories, 230 V, 1400 mm sweep min air delivery 245 CFM with service value 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and driected. (Note:- Additional length of down rods are also included.) 127 Supply and fixing of exhaust fan, steel body AC single Phase 230V of size 380m sweep with, blades, and frame and louvers including complete fitting into the wall and all as specified and directed. 128 Supply and Laying cable XLPE Insulated screened PVC bedded, galvanized steel strip armoured service cable pole to building electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 Core complete all as specified and directed. 129 S & F40 mm bore GI Tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection with suitable size of MS Clapms and nut and bolts/washer complete all as specified and directed. 130 Supply & laying sand cushioning to under ground cable in layers of 23 cm thick (8 cm before laying the cable and 15 cm thick after laying the cable, punned thickness shall be measured) in trenches complete all as specified and directed.Note: - Only punned thickness shall be measured and paid. 131 M&L for protection to cable with well burnt sub class B bricks laid dry flatbrick,width equal to length of brick complete all as specified and directed. 132 S&F of metal plug & socket DB with metal plug and MCBs single pole enclosere with a two pin earth plug and socket suitable for 20 Amp complete with one single pole MCB complete all as specified and directed. 133 M & L Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6 mm thick buried directly in ground.(earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr. belowground level connecting to galvanised earth lead wire 4.0 mm diaas earth lead upto 7.5 meters long connected by means of bolts, check nuts and washers of GI and earth wire protected by provision of GI pipe medium grade, 15 mm bore including provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 40 x 40 x 3mm fixingwith 6mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge plate, common salt and charcoal filling, with fixing arrangement, funnel, wire mesh and earth work in hard / dense soil, returning filling in and removal of surplus soil to a distance not exeeding 50 mtr, all as per electrical plate No 3 of SSR 2009 Part-I and connection all as specified and testing on completion. Note: The cost of excavation and earth work, PCC pit and pit covers, funnel and watering pipe, wire mesh, charcoal dust and common salt,20/ 40mm dia, medium grade, GI pipe as protection to GI wire 4.0 mm as main earthing lead from earth electrode to main TPN MCCBs DB/MCB DB/ test point length not less than 7.5mtrs) shall be deemed included in the unit rate for earthing and testing complete all as specified and directed .

BRR:7510755 Provision Of Electronic Meters At Cgom And Urc And Solar Street Lights At Icgs Kakinada Under Ge(I) (Cg) Vizag

BRR:7510498 Supply Of Miscellaneous Articles Of Departmental Store To This Office Of The S.A.P 10Th Bn., Dabgram, Jalpaiguri.- 1 ALUMINIUM BUCKET 2 ALUMINIUM DABBU SMALL 3 ALUMINIUM DABBU BIG 4 ALUMINIUM GAMLA SMALL 5 ALUMINIUM GAMLA BIG 6 ALUMINIUM HANDI 7 ALUMINIUM KORAI BIG 8 ALUMINIUM KORAI SMALL 9 ALUMINIUM LID 10 ALUMINIUM RICE JHAJRA BIG 11 ALUMINIUM RICE JHAJRA SMALL 12 ALUMINIUM SUSPEN BIG 13 ALUMINIUM SUSPEN SMALL 14 BOTHI BIG 15 BOTHI SMALL 16 BOWL (MELAMINE) 17 CHAKI BELNA 18 CUP-PLATE (06 PCS SET) (GOOD QUALITY) 19 DINNER SET 22 UNIT (CELLO/MILTON) 20 DINNER SET 34 UNIT (CELLO/MILTON) 21 DUSTBIN (10 LTR) 22 DUSTBIN(20 LTR) 23 DUSTBIN(50 LTR) 24 DUSTBIN(100 LTR) 25 BOARD DUSTER 26 FIRE BUCKET 14” 27 FLASK STEEL BODY 1 LTR (BOROSIL) 28 GAS OVEN,GLASS BODY 2 BURNER (PRESTIGE) 29 GAS OVEN,GLASS BODY 3 BURNER (PRESTIGE) 30 GAS OVEN,METAL BODY 2 BURNER (PRESTIGE) 31 GAS OVEN,METAL BODY 3 BURNER (PRESTIGE) 32 GLASS (BOROSIL) 33 HAMUL DISTA (STEEL) 34 HOT POT BIG 14 LTR (CELLO/MILTON) 35 HOT POT BIG 50 LTR (CELLO/MILTON) 36 HOT POT SMALL (CELLO/MILTON) 37 HOTTIIFIN CARRY 04 BOWL (STEEL) 38 HOTTIIFIN CARRY 04 BOWL (FIBER) 39 IRON KHUNTI BIG 40 IRON KHUNTI SMALL 41 IRON TAWA SMALL 42 IRON KARAI 43 LID (FOR GLASS) 44 MIXTURE GRINDER 350 WATT 45 MIXTURE GRINDER 750 WATT 46 MIXTURE GRINDER 1000 WATT 47 MIXTURE GRINDER 1250 WATT 48 MIXTURE GRINDER 1400 WATT 49 PRESSURE COOKER 04 LTR (PRESTIGE/HAWKINS) 50 PRESSURE COOKER 05 LTR (PRESTIGE/HAWKINS) 51 PRESSURE COOKER 14 LTR (PRESTIGE/HAWKINS) 52 PRESSURE COOKER 18 LTR (PRESTIGE/HAWKINS) 53 QUARTER PLATE (MELAMINE) 54 RICE PLATE (MELAMINE) 55 SIL NORA 56 STEEL SPOON(VIP) 57 TEA SPOON 58 STEEL FORK(VIP) 59 STEEL DABBU BIG 60 STEEL DABBU SMALL 61 STEEL HATA BIG 62 STEEL HATA SMALL 63 STEEL JHAJRA BIG 64 STEEL KHUNTI BIG 65 STEEL KHUNTI SMALL 66 STEEL MUG (01 LTR) 67 STEEL TIFFIN CARRY (04 BOWL) 68 TEA CONTAINER(15 LTR) 69 TRAY 70 NON STICK KARAI 71 NON STICK TAWA 72 NON STICK FRY PAN 73 AIR POCKET (GODREJ) 10 GMS 74 BASIN ACID (1 LTR) 75 BIOTIQUE SOAP 75 GMS 76 BASIN BRUSH 77 BED SHEET COLOUR (7’ * 4’) 78 BED SHEET COLOUR (8’ * 7’) 79 BED SHEET WHITE (7’ * 4’) 80 BED SHEET COLOUR (BOMBAY DYIENG) (DOUBLE BED) 81 DOOR CURTAIN (GOOD QUALITY) 82 WINDOW CURTAIN (GOOD QUALITY) 83 WINDOWCURTAIN (ORDINARY) 84 BLANKET ( NORMAL) 85 BLANKET (GOOD QUALITY) 86 BARBED WIRE 87 BROOM STICK (500 GM) 88 BLACK HIT BIG-400 ML 89 BLACK HIT SMALL-200 ML 90 CARBOLIC ACID 450 ML 91 CARBOLIC ACID 100 ML 92 CEMENT (ALL TYPE) 93 COIER MAT 94 CHALK 95 COLINE ( 250 ML) 96 COLINE ( 500 ML) 97 CITROLINA (LIQUID) 98 CITROLINA-05 LTR 99 COTTAN TWISTER MOP (PRESTIGE) 100 COTTAN ROPE 101 COW DUNG 102 DETTOL HAND WASH -200 ML 103 DETTOL LIQUID (ANTISEPTIC) 550 ML 104 HAND WASH – 5 LTR 105 HAND WASH CONTAINER 400 ML 106 DETTOL SOAP (100 GM) 107 DOVE SOAP(100 GM) 108 EXO BAR 500 GM 109 EZEE LIQUID 1 LTR 110 EARTHEN TOB BIG 111 EARTHEN TOB SMALL 112 ECONOMIC SHELF 113 FINIT GUN 114 FULL JHARU 115 FRESS FLUFF TISSUE (NAPKINS) 116 FRESS FLUFF (TOILET ROLL) 117 FOOT MAT PLASTIC QUIRE BIG 118 FOOT MAT COTTON SMALL 119 FOOT MAT COTTON MEDIUM 120 FLOOR VINYL CARPET 121 GOOD KNIGHT OIL (LIQUID) 122 GOOD KNIGHT MACHINE 123 GREEN CARPET 124 GALA ANGLE WIPER 125 HAND TOWEL (WHITE) 126 HARPIC BIG -500 ML 127 HARPIC SMALL- 200 ML 128 HARPIC -5 LTR 129 HAND SANITIZER 130 HAND GLOVES 131 LIZOL(500 ML) 132 LIFEBUOY SOAP (100 GM) 133 LUX SOAP (100 GM) 134 MARGO SOAP (100 GM) 135 MATTRESS (SINGLE BED) 136 MATTRESS (DOUBLE BED) 137 MOSQUITO NET (GOOD QUALITY) 138 MOSQUITO NET FOR WINDOW 139 NIMYLE (HERBAL) 1 LTR 140 ODONIL BIG 141 ODONIL SMALL 142 PEARS SOAP (100 GM) 143 PENCIL BATTERY 144 PLASTIC BROOM KHARATA (GALA) 145 PLASTIC BUCKET 16 LTR 146 PLASTIC BUCKET 20 LTR 147 PLASTIC GAMLA 14 LTR (UNBREAKABLE) 148 PLASTIC GAMLA 16 LTR (UNBREAKABLE) 149 PLASTIC GAMLA 20 LTR (UNBREAKABLE) 150 PLASTIC JHARU (GALA) 151 PLASTIC MUG 152 PLASTIC TABLE CLOTH 153 PILLOW 154 PILLOW COVER 155 RED HIT BIG-400 ML 156 RED HIT SMALL-200 ML 157 ROOM FRESHNER- 220 ML(GODREJ) 158 ROOM FRESHNER-220 ML(ODONIL) 159 ROOM FRESHNER-200 ML(RIYA) 160 ROOM WASHING CHEMICAL 161 RIN BAR 250 GRMS 162 SURF (NIRMA) 163 SURF EXCEL EASY WASH 164 SURF EXCEL QUICK WASH 165 SURF EXCEL BAR 250 GM 166 SURF EXCEL LIQUID (1 LTR) 167 SCOTCH BRITE 168 SOAP TRAY 169 STEEL JUTE 170 STAINLESS STEEL SCRUBER 171 SCRUB PAD (7.5 * 10 CM) 172 TOWEL BIG 173 TABLE CLOTH 174 TOILET BRUSH 175 UMBRELLA GENERAL 176 UJJALA BIG 177 GARDEN UMBRELLA 178 VIM BAR (300 GM) SOAP 179 VIM LIQUID (250 ML) 180 WHITE BOARD 181 WHITE BOARD STAND 182 WHITE CEMENT 183 WOODEN PLAGUE (MOMENTO) 184 WATER JUG PLASTIC(BIG) 185 WATER JUG GLASS (BIG) 186 SURGICAL FACE MASKS 187 FULL BODY PROTECTIVE GEAR BAG 188 PLASTIC TABLE COVER 189 WRAPPINGPAPER 190 ALUMINIUM FOIL CONTRANIER 191 SANITIZERGEL 50 ML 192 DISINFECTIVELIQUID 193 GARBAGEBAG 194 CURTAIN ROD 195 CURTAIN ROD HEAD 196 CLAMP FORCURTAIN ROD 197 WATERFILTER 198 TABLE BLAZER 199 ANGLE HOLDER 200 BATTEN HOLDER 201 BEARING FOR FAN 202 BULB 100 WATT 203 BULB 200 WATT 204 BULB 60 WATT 205 BULB HOLDER 206 BULB L.E.D 10 WATT 207 BULB L.E.D 14 WATT 208 BULB L.E.D 15 WATT 209 BULB L.E.D 5 WATT 210 BULB L.E.D 7 WATT 211 BULB L.E.D 9 WATT 212 BURNISH FOR FAN BINDING 213 BLACK TAPE BIG 214 WATER PROOF TAPE 215 BLACK TAPE SMALL 216 CALLING BELL(WIRELESS) 217 REMOTE BATTERY FORCALLING BELL 218 CASING 8’ 219 CASING 10’ 220 CASING PIN (100 PC) 221 CEILING BELL SWITCH 222 CEILING FAN CONDENCER 223 CEILING ROSE 224 CHINESE NAILS 1” 225 CHINESE NAILS 2” 226 CHINESE NAILS 3” 227 CHANGE LEVER 228 CHOKE (TUBE LIGHT) 229 COPPER WIRE 0.50 MM (BRANDED) 230 COPPER WIRE 1.00 MM (BRANDED) 231 COPPER WIRE 1.50 MM (BRANDED) 232 COPPER WIRE 2.50 MM (BRANDED) 233 COPPER WIRE 3.20 MM (BRANDED) 234 COPPER WIRE 4.00 MM (BRANDED) 235 COPPER WIRE FOR FAN BINDING 35 NO 236 CORD SCREW 1” (100 PC) 237 CORD SCREW 2” (100 PC) 238 CORD SCREW 3” (100 PC) 239 CUT-OUT 240 DATO FIXED 241 DRILL MACHINE 242 ELECTRIC IRON (GOOD QUALITY) 243 ELECTRIC PLUS BIG 244 FLIME 245 HEAT TUBE 246 LEAD WIRE FOR FAN 247 THREE PHASE BAR 248 ELECTRIC PLUS SMALL 249 EXTENSION CORD BIG (ANCHOR) 250 EXTENSION CORD SMALL (ANCHOR) 251 EXHAUST FAN 252 FIRST NUT-BOLT 253 FIVE PIN SOCKET SET WITH SWITCH 254 FLEXIBLE PIPE 255 FLEXIBLE WIRE 256 GI WIRE 257 GREEN PIPE FAN WIRING 258 HAMMER DRILL (IRON) BIT 259 HAMMER DRILL BIT 260 HAMMER (SMALL) 261 HAMMER DRILL MACHINE 262 ISOLATOR 263 INVERTER 600 WATTS(MICROTECH) 264 INVERTER 1200 WATTS(MICROTECH) 265 INVERTER 1500 WATTS(MICROTECH) 266 INVERTER BATTERY 12 VOLT (EXIDE) 100 AMP 267 INVERTER BATTERY 12 VOLT (EXIDE) 150 AMP 268 L.E.D DIODE 269 L.E.D HALOGEN LIGHT 100 WT 270 L.E.D HALOGEN LIGHT 32 WT 271 L.E.D TUBE LIGHT ROD (PHILIPS) 272 L.E.D ZERO (0) WATT 273 M.C.B BOX 274 M.C.B WITH BOX 10 AMP 275 M.C.B WITH BOX 12 AMP 276 M.C.B WITH BOX 16 AMP 277 M.C.B WITH BOX 25 AMP 278 M.C.B WITH BOX 32 AMP 279 M.C.B WITH BOX 40 AMP 280 M.C.B WITH BOX 06 AMP 281 MAIN SWITCH (63 AMP) 282 MICRO PHONE BATTERY 283 MILIMIX PAPER FOR FAN 284 PIPE FOR FAN COIL BINDING 01 NO 285 PIPE FOR FAN COIL BINDING 02 NO 286 PLUG 3 PIN 287 PLUG 5 PIN 288 POWER SOCKET WITH BOX 10 AMP 289 POWER SOCKET WITH BOX 16 AMP 290 PVC SWITCH BOARD 10’’ X 12” 291 PVC SWITCH BOARD 2’’ X 6” 292 PVC SWITCH BOARD 4’’ X 4” 293 PVC SWITCH BOARD 4’’ X 6” 294 PVC SWITCH BOARD 6’’ X 8” 295 PVC SWITCH BOARD 8’’ X 10” 296 PVC WIRING PIPE 6’ FTS 297 PVC WIRING PIPE 8’ FTS 298 SCREW BOX 1’’ (50 PC) 299 SCREW BOX 2’’ (50 PC) 300 SCREW BOX 3’’ (50 PC) 301 SCREW DRIVER SET 302 SERVICE WIRE 4mm 303 SERVICE WIRE 6mm 304 SHADDLE FOR WIRING PIPE (12 PC) 305 SOCKET 6 AMP 306 SOCKET16 AMP 307 STAND FAN HIGH SPEED (HAVELLS/CROMPTON) 308 SWITCH 6 AMP/16 AMP 309 TL WIRING CASING 310 TESTER 311 TESTER SET 312 LED TUBE LIGHTSET 20 WATT (PHILIPS/ CROMPTON) 313 LED TUBE LIGHT ROD 20 WATT (PHILIPS/ CROMPTON) 314 WALL FAN (HAVELS/CROMPTON) 315 50WATT LED FLOOD LIGHT 316 2.5MM PVC COPPER WIRE GOLDMEDAL90M 317 GIJJARWITHALL ACCESSORIES (HAVELLS) 318 140 WATTAMPLIFIER (AHUJA) 319 50 WATT SOUND BOX MONITER TYPE 320 DOUBLECHANNELMICROPHONE WIRELESS(AHUJA) 321 MIXTUREMACHINE FOR SOUND SYSTEM (9 CHANNEL) 322 MICROPHONE (ORDINARY) 323 MICROPHONE STAND (BIG) 324 MICROPHONE STAND (SMALL) 325 CABLE WIRE FOR MICROPHONE WITH JACK 326 BADMINTON NET (NYLON GOOD QUALITY) 327 BADMINTON RACKET 328 BADMINTONSHUTTLE COCK (NYLON) 329 BADMINTONSHUTTLE COCK (FEATHER) 330 CARROM BOARD 44” 331 CARROM COIN(GOTI) 332 CARROM STRIKER 333 CRICKETT TENNIS BAT 334 CRICKET WICKET SET WITH BELL 335 FOOTBALL ( BRANDED) 336 ( NIVIA/COSCO) 337 FOOTBALL NET OR GOAL POST NET 338 HIGH JUMP BAR 339 HOCKEY BALL 340 HOCKEY STICK 341 JAVLIN 342 KHANNA SUPER TENNIS BALL 343 MARKER 344 MASHAL 345 MEASUREMENT TAPE(30 MTR) 346 MEASUREMENT TAPE(50 MTR) 347 PLASTIC CONE 348 PUMPER 349 RIBON (ALL COLOUR) 350 SHORT HURDLES 351 SHOT PUT (5KG) 352 SHOT PUT (8KG) 353 STOP WATCH 354 TABLE TENNIS BALL 355 TABLE TENNIS BAT 356 TABLE TENNIS NET 357 CORNER STICK 358 TUG-OF-WAR ROPE 359 TWIST RING 360 VERTICAL ROPE 361 VOLLEYBALL NET ( NIVIA/COSCO) 362 VOLLEYBALL( NIVIA/COSCO) 363 WEIGHT MACHINE (AUTO) 364 GOLDSTAR SHOE 365 LIME MACHINE (IRON 366 LIQUID COMPASS 367 MESTIN SET 368 P.T HALF PANT 369 P.T SHOE 370 P.T VEST 371 YAMAHA MG 16X 372 AHUJA SRX-250DXM 373 MATTRESS CARLON(78*60*6) 374 PLASTIC SHEET (10’ * 8’) 375 SERVICE PROTECTOR 376 SOCKS (KHAKI) 377 SOCKS (WHITE) 378 SWIMMING GLASS 379 SWIMMING HALF PANT (CUSTOM) 380 TRACK PANT (LOWER) 381 TRACK SHUIT SET (UPPER + LOWER) 382 VEST JUNGLE PATCHES 383 BAMBOO (BIG) 384 CLOTH HASSAN 385 COCONUT ROPE 386 FEVICOL LIQUID 387 FIRE WOOD 388 GREEN CHOT 389 MAIDA 390 PICHING PAPER 391 PICHING STICKER 392 SALU CLOTH 393 SUTLI ROPE 394 TARGET PAPER 4’ * 4’ 395 TARGET PAPER 11 (FIGURE) 396 AUTOMATIC SPRAY MACHINE 397 BRUSH TUB 398 CAN JHURI 399 DHURMUSH 400 GARDEN PIPE 401 GRASS CUTTER BLADE 402 GRASS CUTTER HAND KACHI 403 GRASS CUTTER MACHINE 404 GRASS CUTTER WIRE 405 IRON BELCHA 406 IRON DAW 407 IRON GAITY 408 IRON HANSUWA 409 IRON KACHI DAW 410 IRON KARNI 411 IRON KHURPI 412 IRON KNIFE 413 IRON KODAL WITH HANDLE 414 IRON SABOL 3’ 415 IRON SABOL 6’ 416 SPRAY MACHINE (NORMAL) 417 SPRAY MACHINE REPAIRING 418 IRON PATI 419 IRONSHEETDRAIN 420 ALUMINIUM SHEET 421 AXE 422 BATALI SET 423 BRASS DOOR HASPBOLT 6” 424 BRASS DOOR HASPBOLT 8” 425 BRASS DOOR HASPBOLT 10” 426 BRASS DOOR HASPBOLT 12” 427 CHITKANI (DOOR) 428 CHITKANI WINDOW 429 CURTAIN PIPE (STEEL) 430 CURTAIN RING (50 PCS) 431 COPPER BRUSH 432 CARPET 433 COBZA(DOOR) 434 COBZA (WINDOW) 435 COLOUR TIN 436 DOOR MAT (3’ * 2’) 437 DOOR CLOSER 438 DENDRITE(100 GM) 439 EMERY PAPER (IRON) 440 EMERY PAPER (WOODEN) 441 FEVICOL 442 FLASE CELLING P.V.C BOARD WITH ALL ACCESSORIES INCLUDING FITTING AND FIXING 443 FLASE CELLINGJYPSUM BOARD WITH ALL ACCESSORIES INCLUDING FITTING AND FIXING 444 FLASE CELLING ADVESTER BOARD WITH ALL ACCESSORIES INCLUDING FITTING AND FIXING 445 FLEX 446 GLASS 3mm 447 GLASS 4mm 448 GLASS 5mmWITH POLISH 449 GLASS 6mmWITH POLISH 450 GLASS 8mmWITH POLISH 451 GLASS 10mmWITH POLISH 452 GLASS 12mmWITH POLISH 453 WALL MIRROR 454 WALL CLOCK (AJANTABIG SIZE) 455 OFFICEWALL CLOCK (AJANTA) 456 G.C SHEET TIN 6’ 457 G.C SHEET TIN 8’ 458 G.C SHEET TIN 10’ 459 G.C SHEET TIN 12’ 460 HAND SAW 461 HAKSO BLADE 462 HAKSO FRAME 463 IRON ANGLE 1.5” 464 IRON ANGLE 2” 465 IRON GRILL 466 IRON PIPE 1”/1” 467 IRON PIPE 1”/2” 468 IRON PIPE 2”/2” 469 IRON PIPE 1.5”/1.5” 470 IRON PIPE 3”/3” 471 IRON PIPE 3/4”/3/4” 472 IRON ROD 6mm 473 IRON ROD 8mm 474 IRON ROD 10mm 475 IRON ROD12mm 476 IRON ROD16mm 477 IRON SHEET 16 GAZE 478 IRON SHEET 18 GAZE 479 KARRAT (BIG) 480 KARRAT (SMALL) 481 PADLOCK (GODREJ) 6 LEVER 482 PADLOCK (GODREJ) 7 LEVER 483 PADLOCK (GODREJ) 8 LEVER 484 PADLOCK (ORDINARY) 6 LEVER 485 PADLOCK (ORDINARY) 7 LEVER 486 PADLOCK (ORDINARY) 8 LEVER 487 PLY WOOD 6mm 488 PLY WOOD 8mm 489 PLY WOOD 10mm 490 PLY WOOD 12mm 491 PLY WOOD 19mm 492 SLY WRENCH 12” 493 SLY WRENCH 16” 494 SLY WRENCH 20” 495 SCISSOR (BIG) 496 SCISSOR (SMALL) 497 PARTICAL BOARD 8mm 498 PARTICAL BOARD 19mm 499 WINDOW STOPPER 500 WOOD 501 BEUTIFICATION FLAG 8 FTS 502 BEUTIFICATION FLAG 16 FTS 503 BRIGADE FLAG WITH WRITING (6’ X 4’ ) 504 COMPANY FLAG WITH WRITING (6’ X 4’ ) 505 FLEX WITH WRITING 506 NATIONAL FLAG KHADI (6’ X 4’ ) 507 NATIONAL FLAG TERRY COTTON (6’ X 4’ ) 508 UNIT FLAG WITH BOTH SIDEEMBROIDERY 509 NATIONAL FLAG (6’ X 4’) WITH BOTH SIDEEMBROIDERY 510 UNIT EMBROIDERY FLAG (48’’ X 32’’) 511 T-FLAG 512 ANGLE STOP COCK 513 BALL VALVE (UPVC) 0.5’’ 514 BALL VALVE (UPVC) 1’’ 515 BALL VALVE (UPVC) 1.5’’ 516 BALL VALVE (UPVC) 2’’ 517 BASIN MIXTURE 518 BIB COCK (PVC) 519 BRUSH ELBOW 0.5” 520 BRUSH ELBOW 1.5’’ /0.5” 521 BRUSH ELBOW1’’ /0.5” 522 BRUSH FTA0.5” 523 BRUSH MTA 0.5” 524 BRUSH “T” 0.5’’ 525 BRUSH “T” 1.5” 526 BRUSH “T”)1” 527 BUSH 1” 528 BUSH 1.5” 529 CHECK VALVE 1” 530 CONNECTION PIPE 0.5” 531 COUPLING CUP 1.25“ 532 COUPLING CUP 2“ 533 DOOR “T” 4” 534 DOOR BAND 4” 535 ELBOW (UPVC) 0.5” 536 ELBOW (UPVC) 1” 537 ELBOW (UPVC) 1.5” 538 ELBOW (UPVC) 2” 539 EXTENSION NIPPLE 0.5” 540 FLOAT VALVE 1” 541 FLOAT VALVE 1.5” 542 FLOAT VALVE 2” 543 FOOT PUMP 544 FTA (UPVC) 0.5” 545 FTA (UPVC) 1” 546 FTA (UPVC) 1.5” 547 FTA (UPVC) 2” 548 G.I PIPE 1” 549 G.I PIPE 1.5” 550 G.I PIPE 2” 551 INCAPE 0.5” 552 INCAPE 1” 553 M-SEAL 100gm 554 M-SEAL 250gm 555 MTA (UPVC) 0.5” 556 MTA (UPVC) 1” 557 MTA (UPVC) 1.5” 558 MTA (UPVC) 2” 559 PILLER COCK 560 PLUG (UPVC) 0.5” 561 PVC “Y” 4” 562 PVC ELBOW 2” 563 PVC ELBOW 4” 564 PVC PIPE 2” 565 PVC PIPE 4” 566 PVC SHOWER 567 PVC SOCKET 4” 568 SADDLE HOOK 0.75” 569 SADDLE HOOK 0.5” 570 SADDLE HOOK 1” 571 SADDLE HOOK 1.5” 572 SADDLE HOOK 2” 573 SOCKET (UPVC) 0.5” 574 SOCKET (UPVC) 1” 575 SOCKET (UPVC) 1.5” 576 SOCKET (UPVC) 2” 577 SOLVEN CEMENT 578 STEEL BIB COCK 579 STEEL SHOWER 580 SUBMERSIBLE PUMP SERVICING WITH BRANDED PARTS 581 STOP COCK 582 T UPVC 0.5” 583 T UPVC 1” 584 T UPVC 1.5” 585 T UPVC 2” 586 TANK NIPPLE 1” 587 TANK NIPPLE 1.5” 588 TANK NIPPLE 2” 589 TAPLON TAPE 590 TOILET BANGLA PAN 591 TOILET COMMODE PAN 592 UPVC PIPE .75” 593 UPVC PIPE .5” 594 UPVC PIPE 1” 595 UPVC PIPE 1.5” 596 UPVC PIPE 2” 597 UPVC UNION 0.5” 598 UPVC UNION 1” 599 UPVC UNION 1.5” 600 URINAL POT 601 WALL MIXTURE 602 WATER DRUM 20Ltrs 603 WATER FILTER (PVC) 5Ltrs 604 WATER FILTER RO WITH FITTING & FIXING 605 WATER MOTKA 606 WATER STAND G.I 607 WATER TANK (SINTEX) 200 LTRS 608 WATER TANK (SINTEX) 500 LTRS 609 WATER TANK (SINTEX) 2 LAYER 610 WATER TANK (SINTEX) 3 LAYER 611 WROST PIPE 1.25” 612 CEILINGFAN FULLY REPAIRING 613 HELMET REPAIRING 614 SPRAY MACHINE (NORMAL) REPAIRING 615 STAND FAN REPAIRING 616 VAN REPAIRING 617 VATI (GAS OVEN) REPAIRING 618 WALL FAN REPAIRING 619 IRON COT REPAIRING 620 LIME (APPLE) 621 LIME (SURYA DUST) 622 LIME BRUSH 623 PRIMER (WATER) 624 PRIMER (WOODEN/IRON) 625 TARPIN OIL 626 ULTIMA (WHITE) 627 SNOWCEM 628 DISTEMPER 629 J.K PUTTING 630 ROBIN BLUE 631 FEVICOL GUM LIQUID 632 TAR BRUSH 633 PAINT (ALL COLOUR) 634 GOLDEN PAINT 635 SILVER PAINT 636 PUTTING BLADE 6” 637 PAINTING BRUSH 2” 638 PAINTING BRUSH 3” 639 PAINTING BRUSH 4” 640 STAINER 100 ML 641 WEATHER COURT WHITE 642 WEATHER COURT ALL COLOURS 643 WATER PAPER (50 NO.) 644 WATER PAPER (80 NO.) 645 BAZREE 646 BED MISALI 647 BRICKS 648 DHALAI RING 649 FLOOR TILES (2’ * 2’) 650 SAND 651 SOIL 652 STONE CHIPS 653 SEPTIC TANKCLEANING 654 REFILLING ABC FIRE EXTINGUISHER (STORE PRESSURE) 9KG 655 REFILLING ABC FIRE EXTINGUISHER (STORE PRESSURE) 6KG 656 REFILLING ABC FIRE EXTINGUISHER (STORE PRESSURE) 5KG 657 REFILLING ABC FIRE EXTINGUISHER (CARTRIDGE TYPE) 10 KG 658 REFILLING ABC FIRE EXTINGUISHER (CARTRIDGE TYPE) 5 KG 659 REFILLING ABC FIRE EXTINGUISHER (CARTRIDGE TYPE) 4.5 KG 660 BLECHINGPOWDER 661 WHITEPHYNAIL 662 COTTONCUSHIONWITH COVER 663 VINYLCARPET WITHFITTING 664 CALCULATOR(16 DIGIT) 665 CALCULATOR (20 DIGIT) 666 C.C.T.VCAMERA 667 CHAIR CUSION (KURL ON) 668 CHAIR CUSION (ORDINARY) 669 REAPIR AND LOCK CHANGING STEEL ALMIRAHBIG SIZE 670 REAPIR AND LOCK CHANGING STEEL ALMIRAH SMALL SIZE 671 REPAIR AND PAINTED WITH ASSIAN PAINTS COLOURS STEELALMIRAH BIG SIZE 672 REPAIR AND PAINTED WITH ASSIAN PAINTS COLOURS STEELALMIRAH SMALL SIZE 673 REAPIR FOR STEEL TABULAR FRAM TABLE 674 REPAIR AND PAINTED WITH ASSIAN PAINTS COLOURS STEELTABULAR FARM TABLE 675 REAPIR WITH POLISH OF WOODEN CHAIR 676 REAPIR WITH POLISH OF WOODEN TABLE 677 LAPTOPBAG LEATHER 678 OFFICE BAG LEATHER 679 RADIUM MARKING TAPE 680 INAUGURATION BOARD 681 WALL PAPER (BRANDED) 682 TILES2 FT*2 FT(ORDIANRY) 683 TILES2 FT*4 FT(ORDINARY) 684 TILES2 FT*2 FT(BRANDED) 685 TILES2 FT*4 FT(BRANDED) 686 PARKING TILES 25MM 687 PARKING TILES 60MM 688 KATA STONE 689 MARBLE 690 GRANITE 691 CURVE STONE 1 FEET 692 FARMET 693 WOODEN PANELLING WITH POLISH 694 RUFF TILES CLEANER

BRR:7510450 Supply And Installation Of Bollard Light Fixtures On The Walk Way Near Chemical Science Block, Central Dining Hall-1,Biological Science Block And Pushpagiri Hostel Areas At Iiser, Thiruvananthapuram

BRR:7510352 Installation Of Solar Light System At Uttar Khadalgobra Awc At Uttar Khadalgobra Sansad J.L. 86 Plot

BRR:7510217 Maintenance Of Electrical Installation In Residential/ Non-Residential Building At Chandigarh. (Painting Of Existing Street Light Poles, Ms Pedestal And Steel Shutters Installed In The Campus Of Gmch-32, Mhi-32, Ncc-31 And Griid-32 Etc. As Per Nit

BRR:7509831 Providing And Installation Of Traffic Lights At Arainpura Road Gharaunda(For L And C Society And Contractor Both) Providing And Installation Of Traffic Lights At Arainpura Road Gharaunda

BRR:7509792 Shifting Of Transformer Lt Light Pole For Scheme No. Tds 03 And 04 Neemanwasa, Dhatrawda , Lalpur And Kotimahal Ujjain Shifting Of Transformer Lt Light Pole For Scheme No. Tds 03 And 04 Neemanwasa, Dhatrawda , Lalpur And Kotimahal Ujjain

BRR:7509541 Supplying And Erecting Street Light Poles With Led Street Light At Mahadev Mandir , Behind Jawahar Nagar Nirankari Bhavan Of Ward No. 15 Under Dhule Municipal Corporation.

BRR:7509520 Tender For Supply And Erecting Street lighting Poles At Gorewada Main Road In Pr.No.11 Mangalwari Zone No.10

BRR:7509495 Providing And Erecting Led Solar Highmast And Solar Street Light In Banjara Tanda Vasti ( Sevalal Chowk Grampanchayat Samor) At Village Mauje Tanda Kundane Tal Dhule Dist Dhule -Under Vasantrao Naik Tanda Vasti Sudhar Yojana

BRR:7509376 Repair ,Maint To Lt External Electrifications, Repair, Maint Of Security And Perimeter High Mast Lights, Solar Lights, Garden Lights And Connected Items And Repair, Maint Servicing To Dg Sets, Lt Panels And Earthing At Along Mil Stn Under Ge 872 Ews

BRR:7509373 Tender For Repairs / Maint Of Street Lights, Security And Perimeter Lights, High Mast Fittings, Solar Lights, Garden, Gate Lights And Connected Items At Rayang Mil Stn Under Ge 872 Ews

BRR:7509258 Installation of Solar Mini Mast Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 at Ward-13, Beside Dinu babur Ghera under Raghunathpur Municipality in the District of Purulia

BRR:7509257 Installation of Solar Mini Mast Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 at Ward-1, Plot No.:4100 under Raghunathpur Municipality in the District of Purulia.

BRR:7509256 Installation of Solar Mini Mast Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 In between Ward -1 and Ward-13 near Block Office, PWD Road under Raghunathpur Municipalityin the District of Purulia.

BRR:7509255 Installation of Solar Mini Mast Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 at Ward-3, Municipality Road, Tantipara under Raghunathpur Municipality in the District of Purulia

BRR:7509254 Installation of Solar Mini Mast Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 at Ward-7, Bediapara under Raghunathpur Municipality in the District of Purulia.

BRR:7509253 /Gr_22 Installation Of Solar Mini Mast Lighting System. All Accessories Including Led Based Solar Light With Inbuilt Battery. 9M Gi Pole.

BRR:7509251 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at near Arandi Kali Mandir within Arandi-I GP under Arambagh Dev. Block in the District of Hooghly.

BRR:7509250 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at Talpur GPunder Tarekeswar Dev. Block in the District of Hooghly.

BRR:7509249 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at near Harinkhola Darbar Sharif within Harinkhola GP under Arambagh Dev. Block in the District of Hoog

BRR:7509248 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at Gouran Bus stop within Poll-II GP under Khanakul-I Dev. Block in the District of Hooghly.

BRR:7509247 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at Mainan Play Ground near Royal sportingClubwithin ThakuranichakGP under Khanakul-IDev. Block in the District of Hooghly.

BRR:7509246 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at Bandar Farighat within Dhannagari GP under Khanakul-II Dev. Block in the District of Hooghly.

BRR:7509245 Tender For Stand Alone Solar PV High Mast Installation of 12 Mtr. Octagonal Pole with 6X50 Watt. 100 Ah Solar Lights at Ramchandrapur Hospital East side within Rajhati 1GP under Khanakul-II Dev. Block in the District of Hooghly

BRR:7509241 Supply, Installation, Testing & Commissioning of 304 Nos 24-Watt Solar Street Light at different places under Bagnan-I,Bagnan-II, Uluberia-I, Domjur Blocks and 01 Rural Howrah within Howrah District.

BRR:7509239 New Solar Street Light for (1) Mohati near Hanuman Mandir JL No-126, Plot No-1979, (2) Krishna nagar, Near Rajbari JL No-123, Plot No-100/101, (3) Krishna Nagar near Sandhya Rani Pal Pond side JL No-123, Plot No-155, (4) Thakur Nagar Near Sitala Mandir JL No-134 Plot No 535, (5) Begunabari near Sitala Mandir JL No-135, Plot No-31, (6) Udakhali Near Hari Mandir JL No-135, Plot No-7640, (7) Begunabari near Banisansad Club JL No-135, Plot No-2141, (8) Kalaya chak, near Subodh Chandra Pond side JL No-133, Plot No-588, (9) Chatna Bari (Uttar Kalamdan), near Subrata Kumar Pradhan plot JL No-139, Plot No-4117, (10) Dakshin Kalamdan, Near Chandana Mahara plot JL No-2, Plot No-2553, (11) Uttar Kalamdan near Mukunda Kr. Maity Pond side JL No-139, Plot No-4244, (12) Chingurdania near Astam Prahar Mandir JL No-10, Plot No-283 within Khejuri-I Dev. Block,(13) Kakhuriabari near Bajkul Milani Sangha JL No-154, Plot No-1641, (14) Porachingra near Sabuj sathi Club JL No-155,Plot No-1627 within Bhagawanpur-II Dev. Block,(15) Kamarda(Bhunia More) near Bus stand JL No-16 ,Plot No-3721 within Khejuri-I Dev. Block,(16) Kartickkhali near Post Office JL No- 35 ,Plot No-1080, (17) Kartickkhali near Sitala Mandir JL No-35,Plot No-1172, (18) Narsullyachak near Sitala & Kali Mandir JL No-23,Plot No-169 within Khejuri-II Dev. Block in the District of Purba Medinipur.

BRR:7509238 New Solar Street Light for (1) Dekhali near Natun Bazar Mahamaya Kali mandir JL No-20, Plot No-1043, (2) Dekhali near Shyamashree Sangha JL No- 20, Plot No-3725/3685, (3) Alichak near ICDS center JL No-51, Plot No- 43, (4) Khejuril near Sabuj Sangha Club JL No-49, Plot No-2608, (5) Arakbari near pwd road (Bus stand) JL No-99, Plot No-175, (6) Kastala near Bus Stand (Salon More) JL No- 37, Plot No-432/433, (7) Kasaria near Kali Mandir JL No-59, Plot No 437, (8) Khejuri near Pry. School (Vidyamandir) JL No-49, Plot No-3842, (9) Kadirabad char near Laxmi Mandir JL No-120, Plot No-52, (10) Medakhali near Tufan gaji Mandir JL No-36 Plot No-1111, (11) Uttar Pankhai near Hari Mandir JL No-28, Plot No-550, (12) Uttar Pankhai near Manasa Mandir JL No-28, Plot No-2220, (13) Baratala near Shibalay Mandir JL No-29, Plot No-2752, (14) Ramchak near Manasa Mandir(D. Pally) JL No-30, Plot No-890, (15) Serkhanchak near Manasa Mandir JL No- 27, Plot No-1343, (16) Janka near Basuli Mata Mandir JL No-85, Plot No 734/735, (17) Muralichak near Pry School JL No-75, Plot No-12, (18) Sahapur near Sujit Das Plot JL No-63, Plot No-309, (19) Shyampur near Sitala mandir JL N-76, Plot No-1211within Khejuri-II Dev. Block in the District of Purba Medinipur.

BRR:7509119 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) , Mcb - Miniature Circuit - Breakers For A.C. Operation As Per Is Iec 60898 (Part 1) (Q2) Total Quantity : 2

BRR:7508913 Bids Are Invited For High Mast Lighting Octagonal Tower For Small Area With Led Flood Lighting System (V2) (Q2) ((3 3 )) 10 Lakh (S) Total Quantity : 3

BRR:7508888 Supply Of Food Grains And Others , Mustered Oil , Coal Steam Grade , Firewood , Khassi Ka Maans , Red Chilli , Haldi , Dhania , Jeera , Golki , Garlic , Adrakh , Imali (Without Seed) , Aamchur , Salt (Tata) , Maida , Besan (Jalan) , Refine (Fortun) , Suji , Wheat Grinding (Without Jalti) , Lacha Sewai , Ghee , Mahua Dahi , Tilkut , Papadh , Soyabin , Datwan (Neem/Babul) , Patuwa , Sutli , Geru Mitti , Ramras Mitti , Chuna Powder , Kali Chuna , Neel , Coconut Oil , Acid Bottle 450Ml , Nariyal Jharu , Vim Powder , Bleeching Powder , Gamaxin Powder , Finite Oil , Finite Pump , Drain Brush , Harpic 450Ml , Wipper , Phenile Goli , Earthern Pot , Revive , Dhumna , Pot Dhakan , Mitti Ka Diya Small , Mitti Ka Gamla , Plastik Balti , Empty Tina (15 Kg.) , Empty Dubba (5Kg) , Bamboo Tokri , Thin Iron Wire , Long Bamboo , Bamboo Soop , Khajur Ki Chatai , Tar Ka Pankha , Andi Oil , Karanj Oil , Phenile , Detergent Cake (Rin/Surf Excel/Tide) , Bathing Soap (Breez/Lifebouy/Rexona) , Tourch Battery (Eveready) , Tourch Bulb , Tourch 3 Cell , Switch (Hawels/ Anchor) , Electric Wire 3/20 , Holder (Bulb) Hawels/Anchor , Led Bulb 7 Watt , Led Bulb 9 Watt , Led Bulb 12 Watt , Led Bulb 15 Watt , Led Bulb 18 Watt , Led Tube Light 36 W , Led Flood Light 30 Watt , Led Flood Light 60 Watt , Register 4 Zista , Register 3 Zista , Register 2 Zista , Register 1 Zista , Small Copy , White Paper (Rim) , Whitener , Colour Paper / Jista , Carbon Packet (Cores) , Gum Bottle 700 Ml , Mahila Comb , Fevicol , Stamp Pad , Stamp Pad Ink , Paper Pin Packet Oddy , Tag Guchha , Paper A4 Size , Paper A3 Size , Cello Tape , Black Hit/Pcs , Fly Leaf , Cover File , Board File , Guard File , Stapler , Stapler Pin , Highlighter , Marker , Sanitary Napkin , Distil Water , Paint , Sulekh Copy , Chauk , Duster , Scall , Black Board Paint , Marking Chauk , Swing Needles , Slate , Refil , Wood Pencil , Slate Pencil , Pencil Cutter , Pencil Rubber , Tailor Tee Scale , Machine Oil , Machine Needles , Bobin , Nal , Pen , Hand Wash , Sanitizer , Spirit , Dettol

BRR:7508419 Bids Are Invited For Electrical Spares 1 11 1700001989 Fan Ceiling , 1600021418 Electronic Fan Regulator , 1700010041 Led Tube Fitting 4 Feet , 1700001269 Bell Musical 230V , 1700002244 Holder Batton 230V 5A , 1700003838 Bulk Head Fitting , 1700003077 Rccb 63A 3000Ma 2P , 1700002692 Mcb 25A 1P C Curve Lexic 603236 , 1700002660 Mcb 10A 1P C Curve 603233 , 1700002707 Mcb 32A 1P C Curve 603237 , 1700001287 Board Distribution Spn Mcb C Curve 8 Wa , Oem Spares For Automobiles Total Quantity : 11892

BRR:7508386 /Gr_1 Installation Of 1 (No.) Set Of Solar Street Lighting System. Ail Accessories Including Led Based Solar Light With Inbuilt Battery. 6M Gi Pole With 24 Watt Light

BRR:7508385 Tender For /Gr_10 Installation Of 1 (No.) Set Solar Street Light With Led Light With Battery Box Installation of 1 (No.) set of Solar Street Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 5980, JL No.: 194, Mouza: Paschim Bero, Bagicha, Block: Raghiunathpur

BRR:7508382 Installation of Solar Mini Mast Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 at Near Purnadisha Teacher training institute, Salka, Block: Raghunathpur-1under Purulia District

BRR:7508381 Installation of Solar Mini Mast Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 9M GI Pole. Light details: (40/45 watt light) x4 at Plot: 2582, JL No.:155, Mouza: Durmut, Block: Raghunathpur-1 under Purulia District.

BRR:7508379 Installation of 1 (No.) set of Solar Street Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot No.:9020, JL No.: 194, Mouza: Paschim Bero, Block: Raghunathpur-1 under Purulia District

BRR:7508378 Installation of 1 (No.) set of Solar Street Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 7216, (Bero) JL No.:194, Mouza: Paschim Bero, Block: Raghunathpur-1 under Purulia District.

BRR:7508377 Installation of 1 (No.) set of Solar Street Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 9660 (Godi Bero) JL No.:194, Mouza: Paschim Bero, Block: Raghunathpur-I under Purulia District.

BRR:7508376 Installation of 1 (No.) set of Solar Street Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 9601, (Puraton Bero) JL No.:194, Mouza: Paschim Bero, Block: Raghunathpur-1 under Purulia District.

BRR:7508375 Installation of 1 (No.) set of Solar Street Lighting system. AIl accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 10671, JL No.:127, Joichandipahar, Block: Raghunathpur-1 under Purulia District.

BRR:7508374 Installation of 2 (Nos.) set of Solar Street Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 205, JL No.:176, Mouza: Bankra , Block: Raghunathpur-1 under Purulia District.

BRR:7508373 Installation of 2 (Nos.) set of Solar Street Lighting system. All accessories including LED based Solar Light with Inbuilt Battery. 6M GI Pole with 24 watt light at Plot: 24, JL. No.:127, Nanduara, Manipur Leprosy, Block: Raghunathpur-1 under Purulia District.

BRR:7508372 Tender For Installation of 1 (No.) set Solar Street Light with LED Light with battery box, Light details: (18 watt light) x 2; 7M GI Pole at Plot: 1330, JL No.:155, Poddarpara, Mouza: Durmut, Block: Raghunathpur-1 under Purulia District

BRR:7508333 Supply Installation Of Solar Street Light At Different Location Within Raniganj Jamuria Barabani And Salanpur Block In The District Of Paschim Bardhaman Under Mplads Scheme For The Year 2025-2026

BRR:7508189 Bids Are Invited For Flameproof Led Light Fitting , Flameproof Led Emergency Light Led Luminaire (For Flood Light) As Per Is 10322, Is 16107 Total Quantity : 50

BRR:7507878 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) Total Quantity : 30

BRR:7507830 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System (Q3) Total Quantity : 2

BRR:7507828 Bids Are Invited For High Mast Lighting Octagonal Tower For Small Area With Led Flood Lighting System (V2) (Q2) Total Quantity : 1

BRR:7507640 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System Total Quantity : 30

BRR:7507585 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System (Q3) Total Quantity : 10

BRR:7507374 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System,Xlpe Cable For Working Volta Total Quantity : 231

BRR:7507087 Bids Are Invited For High Mast Lighting Octagonal Tower For Small Area With Led Flood Lighting System (V2) (Q2) Total Quantity : 3

BRR:7507085 Bids Are Invited For High Mast Lighting Octagonal Tower For Small Area With Led Flood Lighting System (V2) (Q2) Total Quantity : 3

BRR:7507077 Bids Are Invited For Solar Street Lighting System (Ntpc) (Q3) Mse Total Quantity : 7

BRR:7506934 Bids Are Invited For High Mast Lighting Tower For Large Area With Led Flood Lighting System Total Quantity : 30

BRR:7506774 Tender For Civil Maintenance Work In Type-5 And Type-6 Residences Located In Raj Bhavan Colony - Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes , having thermal stability for hot & cold water supply , including all CPVC plain & threaded fittings . This includes jointing of pipe & fitting with one step CPVC solvent cement trenching , refilling &testing joints complete as per direction of Engineer - in - charge: exposed on wall (25 mm nominal dia pipes)(18.7.3) 2 Providing and fixing 20mm diachlorinated polyvinyl chloride (cpvp )pipes , having thermal stability for hot & cold water supply including the supply with clamps at 1.00m spacing . This includes jointing of pipe and fiting with one step salvent cement and testing of joints complete as per direction of Engineer in charge -Internal work - Exposed on wall (dar-18.7.2) 3 ProvidingandfixingG.I.pipescompletewithG.I.fittingsandclamps, including cutting and making good the walls etc. Internal work- Exposed on wall 15 mm dia nominal bore(dar-18.10.1) 4 ProvidingandfixingG.I.pipescompletewithG.I.fittingsandclamps, including cutting and making good the walls etc. Internal work- Exposed on wall 20 mm dia nominal bore(dar-18.10.2) 5 Providing and fixing20 mm diaball valve(brass) of approved quality,high or low pressure , with plastic floats complete(dar-18.18.2) 6 Providing and fixing15mm diaball valve(brass) of approved quality,high or low pressure , with plastic floats complete(dar-18.18.1) 7 Providing and fixing c.p brass shower rose with 15 or mm inlet :150 mm dia meter (dar-18.22.2) 8 Providing and fixing G.I union in g.i pipe including cutting and threading the pipes ans making long screws etc complete - New work 15 mm nominal bore(18.46.1) 9 Providing and fixing G.I union in g.i pipe including cutting and threading the pipes ans making long screws etc complete - New work 20 mm nominal bore(18.46.2) 10 Providing and fixing c.p brass angle valve for basin mixer and geyser point of approved quality conforming to IS:8931 15 mm nominal bore (dar-18.53.1) 11 Providing and fixing PTMT Ball cock of approved quality , colour and making complete with epoxy aluminium rod with L.P/ H.P.H.D plastic ball :15 mm nominal bore , 105 mm long weighingnot less than 138gms(dar-18.62.1) 12 Providing and fixing 8 mm dia c.p / ss jet with flaxible tube upto 1 meter long s.s triangular plate to European type w.c of quality and make as approved by engineer in charge (DAR-17.16A) 13 providing and fixing p.v.c low level flushing cistern with manually controlled device (handle lever) conforming to is :7231 with all fitting and fixtures complete (10 litre capacity -white )(dar-17.18.1 14 Providing and fixing P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete . Semi rigid pipe ,32 mm dia /40 mm dia (dar-17.28.1.1) 15 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality ) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washers complete(dar-17.31) 16 Providing & fixing float glass panes :(5.00 mm thick glass panes ) wright not lessthen 12.50 kg/sqm dar - 9.7.7.2) 17 Provding and fixing ISI marked flush door shutters conforming to IS : 2202 (part-1) non- decorative type, core of block board contruction with frame of 1st class hard wood and well matched commercial 3 ply veneers on both faces of shutter :35 mm thick including isi marked stainless steel butt hinges with necessary (9.21.1) 18 Fly proof stainless steel grade 304 wire gauge with 0.50 mm dia wire and 1.4 mm wide aperture with matching wood beading (9.7.8) 19 Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screwswith ISI marked M.S. pressed butt hinges bright finished of required size 9.27.2.1 20 Providingandfixing600x120x5mmglassshelfwithedgesroundoff, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.DSR NO-17.33 21 Providingandfixingwhitevitreouschinapedestaltypewatercloset (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushingcistern,includingflushpipe,withmanuallycontrolleddevice (handlelever),conformingtoIS:7231,withallfittingsandfixtures complete, including cutting and making good the walls and floors wherever required : DAR NO-17.2.2 22 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting offittingsandbrackets,cuttingandmakinggoodthewallswherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer DAR No- 17.7.A 23 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubberplug,40mmC.P.brasswastecomplete,includingpaintingthe fittings and brackets, cutting and making good the walls wherever required: White glazed fire clay kitchen sink of size 600x450x 250 mm DAR NO:17.9.1 24 Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS :13983 with c.i brackets and stainless steel plug 40 mm including painting of fitting and brackets , cutting and making good the walls wherever requried (kitchen sink with drain board )(510x1040 mm bowl depth 250mm)(dar-17.10.1.1) 25 Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball.20 mm nominal bore, 120 mm long, weighing not less than 198 gms DSR NO-18.62.2 26 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.15 mm nominal dia DAR NO-1722 B 27 Providing and fixing brass curtain rods ofwall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter.DAR NO-14.28.2 28 Providing and placing on terrace (at all floor levels )polyethlene water storage tank . IS:12701 marked , with cover and suitable locking arrangement and making necessary holes or inlet , outlet and overflow pipes but without fitings and the base support for tank (Dar-18.48) 29 Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.DAR NO-17.22A 30 Providing and layeing in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level:1:5:10 (1 cement :5 coasre sand ( Zone-III) :10 graded stone aggregate 40 mm nominal size dar-4.1.10 31 ProvidingandlayingfactorymadechamferededgeCementConcrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory methodusingPUmould,laidinrequiredcolour&patternover50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 60 mm thick C.C. paver block of M-35 grade with approved DAR NO-16.91.1

BRR:7506268 Tender For Installation Of Solar Light At Ekbarna Health Center Untied

BRR:7506266 Tender For Installation Of Solar Light At Araidanga Kothibari Untied

BRR:7506265 Tender For Installation Of Solar Light In Front Of Purba Betaha Kali Mandir Untied

BRR:7506223 Installation Of Solar Lights 3 Nos Scheme Near Majharul House , At Dhamigachh Maddrassa And Near Anjar House Activity Name 114601846

BRR:7506222 Installation Of Solar Lights At Husenpur Chowk Activity Name 114599622

BRR:7506221 Installation Of Solar Lights At Tinmile Road Bazar Activity Name 114600237

BRR:7506220 Installation Of Solar Lights 3 Nos Scheme Near Sepir House , Near Faruq House And Near Jemir House Activity Name 114602605

BRR:7506078 Construction of Toilet at RM RM Govt Hr Sec School in Singampunari Town Panchayat.(5 Seat); 1 Earth work open excavation and depositing on bank with in the initial lead of 10m and a lift of 2m in hard stiff clay, stiff block cotton, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders etc., as per SS 20 A. TNDSS NO: 23 & 24 VI (S2) VI,VII 9,10with standard specifications. 2 Collection supply and filling of well gravel filling approved quarry including cost andConveyance of all materials to site and all labour charges for filling etc., Complete. 3 Plain Cement Concrete 1:4:8 Mix (one Part of cement, four Part of M- Sand and Eight Part ofaggrigate) using 40 mm size ISS HBG metal from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing. Laying and curing etc., complete as per TNDSS NO : 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge. 4 Supplying and erecting centering for sides and soffits including supports and strutting uptp 3.29m height for plane surfaces in all floors with all cross bracings using mild steel sheets of size 90cmx60cm and 10 gauge stiffened, welded with mild steel angles of size 25mmx25x3mm for boarding laid over silver oak (country wood) joist of size 10cmx6.5cm dia spaced about 90cm centre to centre and supported by casuarina props of 10cm to 13cm dia spaced at 75cm centre tocentre etc.complete complying with standard specification and as directed by the departmental engineers. TNBP No.30 5 For Grade Beam 6 For Roof Beam&Slab 7 For Column,Sunshade 8 Reinforced Cement Concrete 1:1½:3 Mix (One Part of cement, one and half Part of M- Sand and three Part ofaggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc.Complete with std.Specifications. TNDSS NO: 30 V, VI (S3), VII-3. 9 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 10 Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3. 11 Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9 X 43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100CFT 12 Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 10mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 13 Plastering in Cement Mortor 1:5 Mix (one cement, five M- Sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications. 14 Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete 15 Fabricating, supplying and fixing in positon of SOLID PVC DOORS with frames of different sizes as per the specifications given below: PVC door frames made out of best quality PVC extruded section of 40mm * 58 mm * 2.50 mm +/- 0.3 mm thick, having multichamber cross section and duly reinforced with steel to be mitre cut at the corners and welded including providing tie rod at the bottom and necessary weather seal etc., and PVC door shutters made out of extruded plastic section of 60 mm * 24 mm size in the configruation of an A section for shutter frames and multi-chamber hollow plastic section of 200 mm *200 mm*1 mm (average thickness) with tongue and groove section for panels etc., with necessary holdfasts, rubber beedings, furniture fittings, locking arrangements etc., complete including dimantling the masnery, making chippings, holes in the RCC column, beam etc., wherever necessary with power drill to the extent required and redoing the same to the original condition after fixing etc., complete as per specifications and as directed by the dePart ofmental officers. 16 Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick laid in-situ and pointed with same coloured cement 17 Dadooing walls withGlazed tiles of sizes 300mm X 200mm X 6mm size of approved make and quality and colour Set in cement mortar 1:2 (One part of Cement and two part of Plastering Sand (P- Sand)) over 10 mm base layer plastering and pointing with white cement neatly as directed. 18 Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set inbrick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete. 19 Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification 20 Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2. 21 Wiring with 2x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light (6 Points Per Coil) (For Rooms like Bath , Toilet,& Pump room etc..)(SD-26) 22 Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL.(PWD standard data No.SD.83).

BRR:7505880 Tender For Electrification Of 32 Person Hostel Barack (8 Female And 24 Male) At Thana Sherkot Dist.Bijnor. - Wiring for light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 2 Same as above Item No 1 but for Fan & Fresh Air Fan point 3 Same as above Item No 1 but for exhaust Fan point 4 Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. 5 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. 6 Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. 7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2X 1.5sq. mm + 1 X 1.5 sq. mm earth wire 8 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X 2.5sq. mm + 1 X 2.5 sq. mm earth wire 9 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 10 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X6 sq. mm + 1X4 sq. mm earth wire 11 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X10 sq. mm + 1X6 sq. mm earth wire 12 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 16 sq. mm + 1 X 6 sq. mm earth wire 13 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required. 4 X16sq. mm + 2 X 6 sq. mm earth wire 14 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 15 Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. 16 Supplying and fixing PVC batten/ angle holder including connections etc. as required. 17 Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required. 18 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door 19 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)12 way , Double door 20 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double door 21 Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . 4way (4 + 12), Double door 22 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 23 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 24 Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. .63 A 25 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 26 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 27 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation : B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. 28 Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. 29 Cost of 3 to 6 watt LED wall bracket Model No. 58071 as per Price listMake:- Philips 30 Add for Invertor Wiring in wiring Point for light/ Fan/ Plug with 1.5 mm FRLS PVC insulated wire. 31 Supply and laying of 2000×1000×2.5mm thickness checkered Electrical rubber matting of tested quality. 32 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 50 Sqmmx3.5 core 33 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 120 Sqmmx3.5 core 34 Providing and fixing circular/ hexagonal g.i. Box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick g.i. Sheet with its top surface hacked for proper bonding, top lid shall be screwed into the G.I. Box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia m.s. Bar bent to shape as per standard drawing. (DSR Civil-2014 item no. 10.18) 35 SupplyandlayingofaluminiumconductorPVCinsulatedarmouredservedsheathedcables1100Volts gradeatadepthof750mmbelowgroundlevelovera cushionof75mm.thicksandallaroundandprotected with burnt bricks on sides and on top. On surface the cable run shall be fixedon M.S. clamps etc. of suitable size or asdirectedbytheEngineer-Incharge, completeinall respect.Thearmouringofthecableshallbeproperly connected with the earth conductor by clamps etc. 150 sq. mm 3-1/2 core 36 Supply, Installation, Testing amd Commissioning of LT Panel vermin proof floor mounting , M.S. channel base with bottom and Fabricated out of 2.0/1.6mm thick CRCA sheet steel, painted with powder coated paint of shade as per the direction of Engineer In-Charge after proper sheet treatment process of sheet steel. The Bus Bar of panel shall be of Electrical grade High Conductive Aluminum alloy of appropriate cross section as per rating.The main bus bar shall run throughout the panel of rating as main incomer rating. The Bus Bar shall be supported by non hygroscopic SMC/DMC Bus Bar supports which shall be mounted on proper interval to ensure the bear the jerks of short Circuit of 50kA for panels having ACB as Incomer & 36kA for panels having MCCB Incomers. Panel shall be constructed in fully Segregated Compartment Design for Each Feeder as per 3b construction Format. The Panel shall be completed in all respect as per IS: 8623 Part-2&3. There shall be Separate Metering Compartment for incomer metering and outgoing meteringAll Incomer Feeders shall be provided with Multifunction Metering along with Phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. and all Outgoing Feeders 100A & above shall be provided with 3 phase Ammeter along with phase Indicating Lights and other associated components such as CT, control MCB Terminal Block etc. The Feeders above shall be provided a accommodated all Measuring Instruments shall be Digital type & all Indicating Lights shall be LED type. Wiring shall be done from 1100V Grade PVC Insulated copper flexible wire. All ACB shall be Electrically operated Draw-out type with Microprocessor Based O/L, S/C & E/F Release of Breaking/ Withstand Capacity (ICU/ICs/Icw) 50kA or more All MCCB shall be Thermal Magneetic/Microprocessor with O/L & S/C Protection along with Required Spreaders & Extended Rotary Handle with pad Locking facility of Breaking capacity (ICU/ICS) 36kA or more All MCB shall be Thermal 10kA C Curve. Cubicle type switch board shall be Cat-A and B only.Incoming 200 Amp MCCB -1 No& outgoing 100 A MCCB-2 nos. 37 Supply and fixing of 18-22W LED Batten fitting with Extruded Aiuninumn housing, special polycarbenate difluser for glare free light distnbution and suitable mounting for on both surface & suspended. Compelete in all respect. 1980-2420 syslem lumens, >110 Lm/W, PF>0.95, THD<10%, CRI >80, with 3 year warranty. 38 S/f of IP 20, Front Lit, Mid Power SMD type LED light, recessSurface mounting round 10 Watt to 15 Watt , Cut out Min 125 mm, Height Min 40 mm,, LED Down Lighter having Powder coated die cast aluminiun housing with heat sink, High purity transmisivity UV Stabilized Non yellowish diffuser Reflector for unifom light distribution, detachable driver set, stable for 24 Hr Continous Operation, Complete in All respect 1100-1650 system lumen, >110 Lm/W, PF>0.95, THD <10% at full loàd, CRI >80, with 3 years warranty. 39 S/F of Water tight oblong 10wLED Bulk Head luminaire havingDie cast Alluminium housingwithdriver set confirming to IP 65 and above protection ,suitable for 24 Hrs. Continuous operation,complete in all respect.1100 system lumens, 110 Lm/W. PF>0.95, CRI>70, with 3 year warranty.Cat AA 40 Supply and fixing of LED Street light Fitting withmandatory driver set having die cast aluminium body with toughend glass/ UV stabilized PC Cover and lenses suitablefor 75 Watt. to 90 Watt and Confirming to IP 66, and IK07 and above protection having Company LOGO Engraved complete in all respect including Labour.9000-10800 system lumens, High Power LED with lenses,120 Lm/W, PF>0.95, THD <10% at full load, CRI >70,,Potted driver Set in Metal housing (Not Circuitory) Phase to phase Protection at 440V & >300V auto cut and re-startfeature, with 5 years warrantee. 41 S/F of LED Bulb 10 Watt 42 Supply of Fresh Air Fan300 mm Sweep metalic Complete in all respect. 43 Supply of 450mm Heavy duty Exhaust fan 44 S/F of 3w to 6w LED Decorative Mirror Light (Spot Light) fittingconfirming to IP 65 and above protection,complete in all respect.330-660 system lumens, 110lm/W. PF>0.95, THD<20% at full load with 5 year warranty. 45 S&Fof63Amp.fourpolechangeoverswitchon40mmx 40mmx6mmangleironframe,includingthecostoflabour, T&P,paintingandothermaterialrequiredforproper completionoftheworkasperdirectionandsatisfactionof Engineer in charge. 46 S&F of 80to 100 Amp4 pole MCCB (16 KA)Thermal Magnetic release 47 Supplyandfixingof16SWGM.S.drumwithluvers dulypainted includingmaking hole inthe wall for exhaust fan and finishing properly complete in all respect. 48 Supplyandfixingoffireextinguisher,ABCType4.00 kg.capacity(ISIMarkedIS: 15683& TACapproved) complete with initial charge and wall bracket, along with supply of all materials andlabour for proper completion of work. 49 Supply andfixingofC02typefireextinguisher4.5kg. capacity (ISIMarkedIS:2878&TACapproved) complete with initial charge and wall bracket, along with supply of all materials andlabour for proper completionof work.

BRR:7505872 Tender For Annual Maintenance Work Of Non-Residential Buildings. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar As per DSR-2023 Sl. 15.7.4 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm As per DSR-2023 Sl. 15.23.2 3 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR-2023 Sl. 15.56 4 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. As per DSR-2023 Sl. 15.60 5 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). As per DSR-2023 Sl. 4.11 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).As per DSR-2023 Sl. 4.1.8 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) As per DSR-2023 Sl. 5.2.2 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars As per DSR-2023 Sl. 5.22A.1 9 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts As per DSR-2023 Sl. 5.9.6 10 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks. As per DSR-2023 Sl. 6.3.1 11 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) As per DSR-2023 Sl. 6.4.1 12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) As per DSR-2023 Sl. 6.13.2 13 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth. Granite Stone of approved shade As per DSR-2023 Sl. 8.10.2 14 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement andscrews etc. complete :12 mm thick As per DSR-2023 Sl. 8.26.1 15 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture As per DSR-2023 Sl. 8.28.1 16 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per DSR-2023 Sl. 9.20.1 17 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. As per DSR-2023 Sl. 10.16.1 18 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. As per DSR-2023 Sl. 10.29.2 19 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. As per DSR-2023 Sl. 10.31 20 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate As per DSR-2023 Sl. 11.3.1 21 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm As per DSR-2023 Sl. 11.46.2 22 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately). Size of Tile 600x600 mm As per DSR-2023 Sl. 11.47.2 23 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m* As per DSR-2023 Sl. 12.1.3 24 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter As per DSR-2023 Sl. 12.41.2 25 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) As per DSR-2023 Sl. 13.1.1 26 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre As per DSR-2023 Sl. 13.41.1 27 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm As per DSR-2023 Sl. 13.48.1 28 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. As per DSR-2023 Sl. 13.62.1 29 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR-2023 Sl. 13.80 30 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete As per DSR-2023 Sl. 13.88 31 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.As per DSR-2023 Sl. 13.91 32 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As per DSR-2023 Sl. 14.5.1 33 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. As per DSR-2023 Sl. 14.85 34 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturers specifications & direction of Engineer in-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. As per DSR-2023 Sl. 16.91.2 35 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As per DSR-2023 Sl. 17.1.1 36 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid As per DSR-2023 Sl. 17.3.1 37 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps As per DSR-2023 Sl. 17.7.1 38 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White As per DSR-2023 Sl. 17.18.1 39 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR-2023 Sl. 17.31 40 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. As per DSR-2023 Sl. 17.73.2 41 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 15 mm dia. nominal bore As per DSR-2023 Sl. 18.10.1 42 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 20 mm dia. nominal bore As per DSR-2023 Sl. 18.10.2 43 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore As per DSR-2023 Sl. 18.15.1 44 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore As per DSR-2023 Sl. 18.17.1A 45 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR-2023 Sl. 18.48 46 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) As per DSR-2023 Sl. 21.3.2 47 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. As per DSR-2023 Sl. 26.40

BRR:7505871 Tender For Annual Maintenance Work Of Transit Hostel. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar As per DSR-2023 (Item No. 15.7.4) 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm As per DSR-2023 (Item No. 15.23.1) 3 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.As per DSR-2023 (Item No. 2.8.1) 4 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). : As per DSR-2023 (Item No. 4.1.8) 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR-2023 (Item No. 6.1.2) 6 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) As per DSR-2023 (Item No. 6.4.2) 7 Half brick masonry with common burnt clay F.P.S. (non modular) bricksof class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand)As per DSR-2023 (Item No. 6.12.2) 8 12 mm cement plaster of mix : 1:6 (1 cement: 6 coarse sand) As per DSR-2023 (Item No. 13.4.2) 9 15 mm cement plaster on rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) As per DSR-2023 (Item No. 13.5.2) 10 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. As per DSR-2023 (Item No. 22.5) 11 Supply & filling of Brick Bats in sunken portion of building including breaking. As per DSR-2023 (Item No. 0362) 12 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. As per DSR-2023 (Item No. 11.3.1) 13 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. As per DSR-2023 (Item No. 17.1.1) 14 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc complete. Size of Tile 600x600 mm. As per DSR-2023 (Item No. 11.41.2) 15 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete. As per DSR-2023 (Item No. 11.40) 16 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid As per DSR-2023 (Item No. 17.2.1) 17 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 15 mm nominal outer dia. Pipes. As per DSR-2023 (Item No. 18.7.1) 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall 20 mm nominal outer dia. Pipes. As per DSR-2023 (Item No. 18.7.2) 19 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore As per DSR-2023 (Item No. 18.15.1) 20 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal boreAs per DSR-2023 (Item No. 18.17.1A) 21 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal boreAs per DSR-2023 (Item No. 18.17.1) 22 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White As per DSR-2023 (Item No. 17.18.1) 23 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. As per DSR-2023 (Item No. 10.29.2) 24 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete As per DSR-2023 (Item No. 13.88) 25 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. As per DSR-2023 (Item No. 13.41.1) 26 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) As per DSR-2023 (Item No. 13.46.1) 27 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As per DSR-2023 (Item No. 14.5.1) 28 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR-2023 (Item No. 13.80) 29 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. As per DSR-2023 (Item No. 13.62.1) 30 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter As per DSR-2023 (Item No. 12.41.2) 31 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter As per DSR-2023 (Item No. 12.41.1) 32 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per DSR-2023 (Item No. 9.21.1) 33 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. As per DSR-2023 (Item No. 10.31) 34 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturers specifications & direction of Engineer in-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. As per DSR-2023 (Item No. 16.91.2) 35 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR-2023 (Item No. 18.48)

BRR:7505870 Tender For Annual Maintenance Of Inspection House Buildings. - Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar As per DSR-2023 Sl. 15.7.4 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm As per DSR-2023 Sl. 15.23.2 3 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. As per DSR-2023 Sl. 15.56 4 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. As per DSR-2023 Sl. 15.60 5 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20mm nominal size derived from natural sources). As per DSR-2023 Sl. 4.11 6 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources).As per DSR-2023 Sl. 4.1.8 7 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) As per DSR-2023 Sl. 5.2.2 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars As per DSR-2023 Sl. 5.22A.1 9 Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts As per DSR-2023 Sl. 5.9.6 10 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With F.P.S.(non modular) bricks. As per DSR-2023 Sl. 6.3.1 11 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) As per DSR-2023 Sl. 6.4.1 12 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) As per DSR-2023 Sl. 6.13.2 13 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinalpartitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finishedsmooth. Granite Stone of approved shade As per DSR-2023 Sl. 8.10.2 14 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement andscrews etc. complete :12 mm thick As per DSR-2023 Sl. 8.26.1 15 Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture As per DSR-2023 Sl. 8.28.1 16 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. As per DSR-2023 Sl. 9.20.1 17 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. As per DSR-2023 Sl. 10.16.1 18 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. As per DSR-2023 Sl. 10.29.2 19 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. As per DSR-2023 Sl. 10.31 20 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate As per DSR-2023 Sl. 11.3.1 21 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make in all colours & shade in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm As per DSR-2023 Sl. 11.46.2 22 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately). Size of Tile 600x600 mm As per DSR-2023 Sl. 11.47.2 23 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gm/ m* As per DSR-2023 Sl. 12.1.3 24 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110 mm diameter As per DSR-2023 Sl. 12.41.2 25 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) As per DSR-2023 Sl. 13.1.1 26 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre As per DSR-2023 Sl. 13.41.1 27 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Two or more coats applied on walls @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm As per DSR-2023 Sl. 13.48.1 28 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. As per DSR-2023 Sl. 13.62.1 29 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As per DSR-2023 Sl. 13.80 30 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete As per DSR-2023 Sl. 13.88 31 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.As per DSR-2023 Sl. 13.91 32 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). As per DSR-2023 Sl. 14.5.1 33 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. As per DSR-2023 Sl. 14.85 34 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturers specifications & direction of Engineer in-Charge. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. As per DSR-2023 Sl. 16.91.2 35 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests As per DSR-2023 Sl. 17.1.1 36 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid As per DSR-2023 Sl. 17.3.1 37 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps As per DSR-2023 Sl. 17.7.1 38 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10 litre capacity - White As per DSR-2023 Sl. 17.18.1 39 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. As per DSR-2023 Sl. 17.31 40 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. As per DSR-2023 Sl. 17.73.2 41 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 15 mm dia. nominal bore As per DSR-2023 Sl. 18.10.1 42 Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. 20 mm dia. nominal bore As per DSR-2023 Sl. 18.10.2 43 Providing and fixing brass bib cock of approved quality : 15 mm nominal bore As per DSR-2023 Sl. 18.15.1 44 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore As per DSR-2023 Sl. 18.17.1A 45 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. As per DSR-2023 Sl. 18.48 46 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) As per DSR-2023 Sl. 21.3.2 47 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of L shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants as approved by Engineer-in-charge. As per DSR-2023 Sl. 26.40

BRR:7505823 Construction work of iron mesh under the solar light in Primary School Lavarchi, Ward No. 08, Lavarchi

BRR:7505444 Repair Replacement Of Street Light Fitting Security Light Fitting High Mast Flood Light Fittings And Allied Work At 750 Su Under Age E/M Ge Af No 2 Jodhpur, Repair Maint Of Lt Cable Lt Panel, Mccbs And Gi Earthing Chemical Earthing Pits Surge Protec

BRR:7505430 Instalation Of Solar Light Of Rangirpota Village Sansad-Viii,Under Maheshpur G.P ,Fund 5 Th.Sfc(T) /2024-25 (Sl-02)