BRR:9919126 Tender for Reinforced Cement Concrete Road Pratham Tal Kahar Dharmshala Ke Paas Mandleshwar

BRR:9914125 Tender For construction of memorial gate -Block Kaisarganj G.P. Kundasar Me Wajirganj Jaitapur Marg Se Suwatali Mod Ke Paas Chahlari Naresh Balbhadra Singh Smiriti Duwar_06

BRR:9909206 Bids Are Invited For Custom Bid For Services - Cloud Telephony Service

BRR:9901080 Tender For Interlocking Repair, Rcc Slab Repair, And Cc Road Work From Saas Bahu Saree Shop To Anil SharmaS House In Mu. Ali Nagar Ward No. 11.

BRR:9899801 Bids Are Invited For On-Premises Private Cloud Infra Setup Total Quantity : 1

BRR:9895323 Provisioning, Installation, Configuration,Testing, Commissioning, Operations And Maintenance Of Cloud Based Email And Office Collaboration Solution For Bmc

BRR:9894716 Bids Are Invited For Design, Development And Maintenance Of A New Fully Dynamic Website Including Cloud Hosting , Middleware Platform System Software Website Application Security Platform Software Total Quantity : 1

BRR:9893424 Tender For Continuous Inviting Applications For Empanelment Of Agencies For Providing Ai Services On Cloud

BRR:9891065 Tender For Supply And Installation Of Cctv Camera , Confidential Section , 32 Ch Nvr Supports Smart H.265+, H.265, Smart H.264+, H.264 And Mjpeg Decoding Formats. ž Max. Decoding Capability: 8 × 1080P@30 Fps Or 2 × 8 Mp@30 Fps. ž Max. 160/160/80 Mbps Incoming/Recording/Outgoing Bandwidth. ž Supports Ip Cameras With A Resolution Up To 12 Mp. ž Ai By Recorder Supports 4-Channel Smd Plus. ž Ai By Camera Supports Face Detection And Recognition, Perimeter Protection, Smd Plus, People Counting, Stereo Analysis And Heat Map. ž Supports Eptz, And One-Click Arming And Disarming ] Or Latest And Higher , Hard Disk ; Supply & Installation Of Hdd-4Tb Capacity With Connection, Testing And Commissioning In Security Cabin. (As Directed By Engineer In Charge/ Electrical Consultant) Skyhawk 4 Tb Surveillance, Internal Hard Drive Hdd - 3.5 Inch Sata 6 Gb/S 64 Mb Cache For Dvr Nvr Security Camera System With Drive Health Management , Switch : 8+2 Port Poe Switch Gigaoutput, Supplying, Fixing, And Configuring, Web Smart Power Over Ethernet, Switch Of 8+2 Ports On Provided Rack, Suppling, Erecting & Testing Commissioning. , Camera: Dome Ip Camera 4-Mp 1/3 Cmos Image Sensor, Low Luminance, And High Definition Image. • Outputs Max. 4 Mp (2560 × 1440)@25/30 Fps. • H.265 Codec, High Compression Rate, Ultra-Low Bit Rate. • Built-In Warm Light, And The Max. Illumination Distance Is 15 M. • Roi, Smart H.264+/H.265+, Flexible Coding, Applicable To Various Bandwidth And Storage Environments. • Rotation Mode, Wdr, 3D Nr, Hlc, Blc, Digital Watermarking, Applicable To Various Monitoring Scenes. • Abnormality Detection: Motion Detection, Video Tampering, Audio Exception, Network Disconnection, Ip Conflict, Illegal Access, And Voltage Detection. • Built-In Mic. • 12 Vdc/Poe Power Supply Or Latest And Higher , Surface Box: Surface Box Square 4X4 Inches (White) For Cctv Cameras , Monitor : 32 Led Monitor 80 Cm (32 Inches) G Series Hd Ready Smart Led Google Tv (Black) , Wireless Mouse : Wireless Mouse 130 Wireless Compact Mouse, 1K Dpi Optical Sensor, 2.4Ghz Wireless Nano Usb, 10M Range, 3Button(Left,Right,Scroll) Up To 3M Left/Right Clicks, 10Month Battery, Ambidextrous, Ergonomic, Gy51L52638 , Cable: Cat-6 Cable Per Ft With Pipe Fitting .Heavy 0.51Mm Copper Gauge.Ec Grade Copper. International Standard Twisting .Outer Hdpe Jacket. Fluke Tested (In Rft) , Connectors: Connectors With Networking D-Link(India) Rj45 Connector Module Plugs. All Networking Clip, Rj45 Connector Colour White , Camera Installation Charges , Tv Stand: Tv Stand 18-55.. Sk Expertise Wooden Wall Mounted Tv Unit, Tv Cabinet. , Switch: 8 Port Desktop Switch Gigabyte Up To 2000 Mbps. Ieee 802.3X Flow Control.Plug And Play Installation. , Central Administrative Service Unit. , 8 Ch Hd Dvr , 1000Gb Hard Disk (Sv 35) Sata Hd , Dome Hd Camera Latest And Higher , Installation Charges , Boys Hostel , Ip Camera Dome 2 Mp: Image Sensor-1/2.8 Progressive Scan Cmos, Min. Illumination-Color: 0.002 Lux @ (F1.4, Agc On), B/W: 0 Lux With Ir, Shutter Speed-1/3 S To 1/100,000 S, Wide Dynamic Range -120 Db, Day & Night-Ir Cut Filter, Angle Adjustment-Pan: 0° To 360°, Tilt: 0° To 90°, Rotate : 0 To 360, Lens Type-Fixed Focal Lens, 2.8, 4, And 6 Mm Optional, Itis Types-Fixed, Aperture-F1.4, Supplement Light Type-Ir, Ir Range-Up To 40 Mtrs, Ir Wavelength-850 Nm, Smart Supplement Light-Yes, Max Resolution-1920 X 1080, Video Bit Rate -32 Kbps To 8 Mbps, Environment Noise Filtering - Yes, Audio Sampling Rate-8 Khz/16Khz/32Khz/44.1 Khz/48Khz, Built-In Mic-Yes, Audio Compression-G.711Alaw/G.722.1/G.722.1/G.726/Mp2L2/Pcm/Mp3/Aac-Lc, Ethernet Interface - 1 Rj45 10 M/100 M Self-Adaptive Ethernet Port, On Board Storage - Built In Memory Card Slot, Support Micro Sd/Sdhc/Sdxc Card, Up To 512 Gb, Basic Event-Motion Detection (Human And Vehicle Targets Classification), Video Tampering Alarm, Exception, Face Capture - Yes, Perimeter Protection-Line Crossing Detection, Intrusion Detection, Region Entrance Detection, Region Exiting Detection, Protection Ip67 (Iec 60529-2023), Ik10 (Iec 62262:2002). Or Latest And Higher , Ip Camera Bullet 2 Mp Image Sensor-1/2.8 Progressive Scan Cmos, Min. Illumination-Color: 0.002 Lux @ (F1.4, Agc On), B/W: 0 Lux With Ir, Shutter Speed-1/3 S To 1/100,000 S, Wide Dynamic Range -120 Db, Day & Night-Ir Cut Filter, Angle Adjustment-Pan: 0° To 360°, Tilt: 0° To 90°, Rotate: 0° To 360° ,Lens Type-Fixed Focal Lens, 2.8, 4, And 6 Mm Optional, Iris Type -Fixed,Aperture-F1.4,Supplement Light Type-Ir,Ir Range-Upto 40 Mtrs, Ir Wavelength-850 Nm, Smart Supplement Light-Yes, Max Resolution-1920 X 1080,Video Bit Rate- 32 Kbps To 8 Mbps, Environment Noise Filtering- Yes, Audio Sampling Rate- 8 Khz/16 Khz/32 Khz/44.1 Khz/48 Khz, Audio Compression- G.711Ulaw/G.711Alaw/G.722.1/G.726/Mp2L2/Pcm/Mp3/Aac-Lc, Ethernet Interface -1 Rj45 10 M/100 M Self-Adaptive Ethernet Port, On-Board Storage -Built-In Memory Card Slot, Support Microsd/Sdhc/Sdxc Card, Up To 512 Gb, Basic Event-Motion Detection (Human And Vehicle Targets Classification), Video Tampering Alarm, Exception, Face Capture- Yes, Perimeter Protection-Line Crossing Detection, Intrusion Detection, Region Entrance Detection, Region Exiting Detection, Protection -Ip67 (Iec 60529-2013)Or Latest And Higher , 32 Channel Network Video Recorder 2 Mp: Up To 32-Ch Ip Camera Inputs H.265+/H.265/H.264+/H.264 Video Formats Up To 12 Mp Resolution, Hdmi 1 -4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 2K (2560 × 1440)/60Hz, 1920 ×1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 ×768/60Hz, Hdmi1/Vga Simultaneous Output, Hdmi 2-1920 × 1080/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz,Hdmi2/Vga Independent Output, Network Protocol-Tcp/Ip, Dhcp, Ipv4,Hikconnect , Dns, Ddns, Ntp, Rtsp, Sadp, Smtp, Snmp, Nfs, Iscsi, Isup, Upnp™, Http, Https,4 Hdds For Continuous Video Recording, Up To 10Tb Capacity For Each Disk,4 Sata Interfaces Supporting Hot-Plug, Up To 256 Mbps Incoming Bandwidth, Network Interface -2, Rj-45 10/100/1000 Mbps Self-Adaptive Ethernet Interfaces, Audio Compression -G.711Ulaw/G.711Alaw/G.722/G.726/Acc/Mp2L2,Audio Output-1-Ch, Rca (2.0 Vp-P, 1 Kω, Using The Audio Input ),Audio Input -1-Ch, Rca (2.0 Vp-P, 1 Kω),Facial Detection And Analytics-Face Picture Comparison, Human Face Capture, Face Picture Search, Face Picture Library-Up To 16 Face Picture Libraries, With Up To 10,000 Face Pictures In Total (Each Picture≤ 512 Kb, Total Capacity ≤ 150 Mb),Face Picture Comparison-4-Ch Face Picture Comparison Alarm, Performance Of Facial Detection And Analytics-1-Ch Human Face Capture (Hd Network Camera, Up To 4 Mp, H.264/H.265), False Alarm Protection (Perimeter Protection) - Up To 4-Ch 2 Mp (H.264/H.265) Video Analysis For Human And Vehicle Recognition To Reduce False Alarm; Up To 12 Rules In Total,Or Latest And Higher , Surveillance Hard Disk 6 Tb , Network Switch Poe 16 Port, 16X10/100/1000 Base-T Poe Port With 2 Sfp Uplink. 1610/100/1000 Mbps Gigabit Ethernet Ports 2 Sfp Port, 150 Watts Available Poe, Flow Control For Protection Against Data Loss, Maximum Distance Of 250M, Light Protection (6Kv), Operating Temperature : 0 To 400 C (32 To 104 Deg F)Or Latest And Higher , Dome Camera Wall Mount Pvc Stand , Pvc Junction Box , 32 Let Tv (An Reputed Brand) , Cat6 Cable (Approx. 1525 Mtrs) (In Rmt) , Cable Laying Charges (Cat6 Cable) (Approx. 1525 Mtrs) (In Rmt) , Conduit Pipe / Casing Patti With Saddled Fitting ( Approx. 400 Mtrs.) , Single Mode Six Core Optic Fiber Cable (Armored) (Approx. 800 Mtrs.) , Optic Fiber Cable Paying Charges (Overhead) (Approx. 800 Mtrs.) , 1000 Base - Mini Gigabit Interface Converter , Fiber Patch Cord With Splicing Charges , Hdmk Cable 4K( 15Mtrs. ) , Network Rack 6U With Fan, Pdu & Standard Accessories. , Network Rack 15U With Fan, Pdu & Standard Accessories. , Setup, Installation, Crimping, Punching & Supervision Charges With One Year Warranty & Support. , Adiwasi Girls Hostel , Setup & Installation Of Ip Dome /Bullet 2 Mp,1/2.8 Progressive Scan Cmos,Icr,Color 0.028 Lux @(F2.0:Agc On),0 Lux With Ir ,1920X1080:25Fps/30Fps (50/60Hz), 2.8Mm/4Mm Lens Fixed,H.265+/H.265/H.264/ Mjpeg, Dc12V &Poe, 3D Dnr, Blc, Roi, Hlc, Wdr, Ir Range: Up To 30M, Cloud Service. 3-Axis Adjustment, Rj45 Ethernet Interface, Line Crossing Detection, Intrusion Detection, Scene Change Detection, Audio Exception Detection, Face Detection, Ip67, Onvif (Profile S, Profile G), Isapior Latest And Higher , Hard Surveillance Disk 6 Tb , Network Switch: 16 Port Network Switch Poe 16X10/100 Base-T Poe Port , 2 X Giga Rj45Or Latest And Higher , Network Switch:: 10 Port Network Switch Poe 8 X 10/100/1000 Base-T Poe Port, 2 X Giga Rj45Or Latest And Higher , Network Rack: 6U Network Rack With Standard Accessories , Pvc Junction Box , Metal Pole Clamp , Cat6 Cable (Rmt) , Cable Laying Charges (Rmt) , Conduit Pipe/Casing Patti With Pvc Clip Fitting (Mtr) , Setup,Installation ,Crimping ,Punching & Supervision Charges With One Year Warranty & Support

BRR:9886631 Bids Are Invited For Bulk Email Services - Transactional; Text Based; Cloud Based

BRR:9886435 Bids Are Invited For Virtual Machine (Compute) - Virtual Private Cloud (Vpc); Ubuntu Operating System; 16; 4; 1:2; Application; Primary Dc; 400

BRR:9885780 Bids Are Invited For Nucleic Acid Sequencing And Genotyping Service - Dna Sequencing; Animal; Human / Animal Tissue; To Be Collected By The Service Provider From The Buyer; Illumina; 95% And Above; 10X; High Throughput; Primary Analysis; Cloud Storage; 30 Days; Machine B..

BRR:9920219 Providing And Installation Of Desktop Computer, Laptop, Laser Printer, High Speed Scanner, Ups, Usb, Ssd For Office Use Of Rd 6Th Circle, Khowai, R.D Teliamura, Khowai Division And R.D Sub-Divisional Offices Under Khowai District During The F.Y 24-25 , Desktop Computer Set (Dell/Hp/Acer/Lenovo) Specification:- ? Processor: Intel Core I5, 12Th Generation. ? Os: Pre-Loaded Windows 11 Preferable. ? Pre-Installed: Ms Office. ? Memory: 8Gb Ram Ddr4, ? Expandable Up To 16Gb ? Storage: 512Gb Ssd ? Display: 19.5// Led Monitor. ? Keyboard : Usb Keyboard ? Mouse : Usb Mouse ? Connectivity : Wi-Fi ? Warranty: 1 Year Warranty From The Date Supply. , Laptop(Dell/Hp/Acer/Lenovo) ? Processor : Intel Core I5, 12Th Generation. ? Os: Pre-Loaded Windows 11 Preferable. ? Pre-Installed: Ms Office. ? Memory: 8Gb Ram Ddr4, ? Expandable Up To 16Gb ? Storage: 512Gb Ssd ? Display: 15.6 Inch. ? Connectivity : Wi-Fi ? Warranty: 1 Year Warranty From The Date Supply. , High-Speed Document Scanner (Hp/Canon/Epson) ? 600 Dpi ? Warranty: 1 Year Warranty From The Date Supply. , Digital Multifunction Laser Printer (Hp/Canon/Epson): ? Functions : Print, Scan, Copy ; ? Printer Output : Monochrome ; ? Connectivity : Usb, Ethernet, Wi-Fi, Wi-Fi Direct ; ? Scanner : Yes ; ? Scanner Resolution : 600 X 600 Dpi, ? Driver Enhanced - Up To 9600 X 9600 Dpi; ? Duplex : Auto ? Page Size: A4, B5, A5, A6, Letter, Legal. ? Os Compatibility: Windows, Windows Server, Mac Os, Linux, Chrome Os. ? Maximum Print Speed (Monochrome) : High Speed ? Warranty - 1 Year Onsite Warranty From The Date Of Supply. , Ups For Desktop Pc 600/650Va (Foxin/Zebronics/Microtek) , Usb Wi-Fi Dongle Adapter 300 Mbps (1 Year Warranty) (Tp- Link/Ant Esport/D-Link) , Ssd 128 Gb, 2.5 Inch, 1 Year Warranty (Western Digital/Lapcare/Foxin/Consistent ) , Led Monitor (Dell/Hp/Acer) - 19.5//. Warranty Period: 1 Year Manufacturer Warranty. , High Definition Projector For Office, Dust-Proof Redefined Projector With Auto Focus & Keystone(Brabenq/Wzatco/E- Gate/Agaro) Display Resolution : 4096 X 2160, Hardware Interface : Usb, Hdmi, Bluetooth Image Contrast Ratio : 100000:1 Compatible Devices : Smartphones, Tablets, Laptops, Desktop. Max Throw Distance : 5-7 Meters

BRR:9918783 Tender for Supply & Installation Of Office Furniture And Fixtures At Dum Dum Motijheel Rabindra Mahavidyalaya, 208/B/2 Dum Dum Road, Kolkata 700074. , Linear Workstation Make : Aglobia Dimension : 1200Mm X 600Mm Sharing 3 Sides Each ( Total - 6 Persons ) , Technical Specification 1. Make : A-Globia Creations : Model : Agc60 Workstation 2. Dimensions: 1200Mm X 600 Mm X750 Mm ( Per Person) 3. Worktop - Made Of 25 Mm Thick Prelaminated Particle Board With Machine Pressed Pvc Edge Band On All Sides. 4. Gablend - Made Of 25 Mm Thick Prelaminated Particle Board With Machine Pressed Pvc Edge Band On All Sides. 5. Front Partition System - The Main Partition 60Mm Thick And 1200Mm Ht. With Top Tile In Pinup Board And Laminate Marker Board/ Fabric Of Approved Shade And Color Per Workstation , Lower Tile In Prelaminated Finish On Both Sides. All Metal Component Is In Powder Coated Finish With The Thickness Of 50-60 Μ Dft. All Vertical Component Are Made Up Of Aluminium Extrusions.Partition System Have Adequate Raceway At Single And Double Level For Running Data & Power Cables. Raceway Above Table Top And At Skirting Considered (Main Spine Only). 6. End/Side Partition System - The Return Partition 28Mm Thick And 1200Mm Ht. With Top Panel In Fabric Of Approved Shade And Color Per Workstation , Lower Panel In Laminated Finish On Both Sides. All Trims In Powder Coated Finish With The Thickness Of 50- 60 Μ Dft. 7. Separator Panel - Glass Separator 8Mm(Clear) Panel With D Clamp 600L X 450H. 8. Keyboard Tray - Key Board Tray Without Mouse Tray Powder Coated. 9. Cpu Trolly - Cpu Trolley Powder Coated. , Auditorium Chair , Technical Specification Preferred Make : Audichair Auditorium Tip-Up Chair With Padded Handle. Outer To Outer : 21 Inch And Height From Ground To Tip Of Back Rest : 40 Inch , Carpet For Auditorium , Technical Specification 4 Mm Loop Pile Square Carpet Make : Tulip International , Outdoor Signage With Sensors , Technical Specification Outdoor Signage, Rgb Video Wall With Ip65 Grade, Metal Frame Structure And Canopy To Display Weather Data Pixel Pitch : 6 Mm Size Of Video Wall : 6Ft X 4Ft Pixel Density : 27666 Dot/M2, Unit Pixel : Smd Rgb 3 In 1 Brightness: = 6500 Cd/ M2, Frame Frequency : 60Hz Cms Based Offline Controller, Able To Display Only Offline Contents On The Display From A Pc Along With Weather Data Certification : Bis, Iso 9001-2015, Iso 20000-1, Iso 14001 Iso 27001, Nabl, Reach, Fcc, Ce Rohs Oshas 45001 Display Supported Format : Text, Video, Image Data Entry Lan, Usb, Wifi From Pc / Laptop Cabinet : Ip65 Black Matt Powder Coated Weather Sensors For Date & Time / Temperature / Humidity/Pm 2.5 /Pm10/Co2/O2 Preferred Make : Addsoft , Chair With Caster Wheel , Technical Specification Preferred Make : Iafa Furniture , High Wall Ac With Installation , Technical Specification Make : Panasonic 2 Ton Invertor , 2 Star Rating With Instasllation Considering Necessary Cu Pipe And Accessories , Wooden Dais For Class Room ( Custtomized ) , Technical Specification Made Of 19Mm Bwr Grade Ply Structure And Top. 3 Side .8Mm Laminate And Top Paint. Dimension - 8Ft X 6Ft ( Height : 12) , Principal Table (Customized ) , Technical Specification Made Of 19Mm Bwr Grade Ply Structure 6Mm Ply Back Cover. Outer And Inner Side Laminate With 0.8Mm . U Shape, Drawer, Cupboard, Cpu, Ups Stand And Key Board Tray Total : 40 Sqft , Cctv Considering Installation ,Integration , Technical Specification Cctv Considering 22 Nos Of Camera / 1 No 36 Channel Nvr 6Tb Hdd , 55 Led Display , Necessary Lan Connectivity , Installation ,Integration Preferred Make : Sparsh / Lg

BRR:9916821 Bids Are invited for Next Generation Firewall Utm , 24 Ports Core Switch , 10G Sfp Plus Transceiver , 24 Ports Poe Switch , Windows Server 2025 Standard License , 42U Rack With All Its Accessories , 24 Port Patch Panel Loaded , 6 Core Ofc Cable , 1 Mtr Lc To Lc Fiber Patch Cord , 12 Ports Lc Liu , 24 Ports Lc Liu , Supply Installation Testing And Commissioning Charges , Wi-Fi 6 Indoor Access Point , Network Controller , 24 Ports Poe Switch , 12U Rack With Its Accessories , 24 Port Patch Panel Loaded , Cat6 Patch Cord 1 Mtr , Cat6 Cable Utp 305 Mtr Bundle , Pvc Conduit , Supply Installation, Testing And Commissioning Charges Total Quantity : 896

BRR:9915617 Bids Are Invited For Camera With All Field Equipment Ie Pole Switch Junction Box Ups Earthing Etc , Software Analytics For Anpr Camera To E Vahan Integration , Optical Fiber In Meter Lumpsum , Local High End Workstation Or Server , Work Station , Display Fifty Five Inch , Five Kva Online Ups , Video Management Software For Camera Minimum Three Hundrund Numbers For All Ten Locations , Video Analytics Software Like Crowd Management Parking Other As Per Requirement Minimum Three Hundrud Numbers For All Ten Locations , Central Server , Video Wall , Fourty Two U Rack , Twenty Four Port Poe Switch , Firewall , Installation Testing Commissioning With All Essential Accessories In All Locations , Internet Lease Line Connectivity In Each Location As Per Required Band Width For Complete Three Years , Manpower Operational Support For Minimum Three Years , Artifical Intelligence (Ai) Based Video Analytics Software Total Quantity : 46127

BRR:9915612 Bids Are Invited For Internet Bandwidth And Replication Service - Internet Leased Line; Private Service Provider; Na; Na; 10

BRR:9915177 Supply Of a set of hardware items for cybersecurity at the pcme & cwm/nbqs office 1. supply & commissioning of all in one highly programmed pc with 1 set python & java script windows 11 original pre loaded screen 24 , a set of hardware items for cybersecurity at the pcme & cwm/nbqs office 1. supply & com missioning of all in one highly programmed pc with 1 set python & java script windows 11 original pre lo ded screen 24 inch uhd graphics 770 15 13700 gen model 16 core 16 gb rom support upto 40 gb 1tb s sd storage support upto 100 gb with wifi & along with power backup system (1. nos) up to 30 minutes w ith sql & python for with lan or enabled all hardware are configure with pro encryption & pki offline ser ver installed all device clint connected with ctms system in res-berry-pl sb module v-0.12 make-customiz ed hp/lenovo//beng/dell -for 10 devices. 2. supply & commissioning of xg5 108 hw application fan-less d esktop 1 set firewall hardware along with 12,500 mbps throughout 2.5 ge interfaces with zero day protec tion model-xg108297uizzpcus with installation setup for-10 devices & license for 12 months. make soph os/fortinet/cisco. 3. supply & commissioning of x-stream protection base hardware firewall network prot ection web protection with installation, full configuration & license for 12 months, 10 devices. make-soph os/cisco/rab. 4. supply & commissioning of central intercept x-advance xdr chico network data fetch ha rdware with central dashboard with offline-nt server hardware installation & customization for end point security and license for 12 months-10 devices. make-sophos/cisco/rabil [ warranty period: 30 months after the date of delivery ] ]

BRR:9915072 Supply Of smart monitor, 4k, 32 inch. make: samsung, lg or similaras per specification:-1. product must be a smart monitor & not smart tv. 2. screen size - 32 inch.3. resolution - 4k (uhd 3840 x 2160)4. monitor must be designed for desk-based computer usage (2-3 feet viewing distance)5. connectivity ports :- hdmi-2 nos; usb-2.0 or above - 2 nos.; usb c -1 minimum.6. inbuilt wi-fi 5.0 or above and bluetooth 5.2 or above.

BRR:9915059 Supply Of Set Consisting Of 02 Items. 1) Point To Point Cpe Device 2) Ups For Power Backup Input 220-240V.Set Consisting Of 02 Items. 1) Point To Point Cpe Device 2) Ups For Power Backup Input 220-240V.,Set Consisting Of 02 Items. 1) 5 Ghz Point To Point Cpe Device (5Km) = 24 Nos. 2) Ups For Po Wer Backup Input 220-240V, Output 12V, 7.5Mah = 12 Nos. Make: Tenda Or Any Equivalent Reputable Make. ]

BRR:9913723 Tc For Certain Artificer Works In Ocs Area And Other Otm Area Under Zone B At Ota Gaya; 1 Distribution Switch - Layer 3 2 Access Switch - Layer 2/3 PoE+ (24 Port) 3 Wi-Fi Access Point - Indoor (Wi-Fi 7) 4 SFP Module - 10GE SFP+ 5 6U Network Rack (800 mm depth) 6 24U Network Rack (1000 mm depth) 7 UTP Patch Cord 0.5m (Cat-6) 8 UTP Cat-6 Cable 9 24-Port Patch Panel (Fully Loaded) 10 OFC Armored Fibre Cable - 12 Core 11 PVC Duct - 32 mm 12 PVC Conduit - 25 mm 13 FDMS - 12 Port 14 FDMS - 06 Port 15 Fibre Patch Cord SC-LC (1m Duplex) 16 Fibre Patch Cord SC-LC (2m Duplex) 17 Joint Coupler - 32 mm 18 Joint Chamber 19 Laying of Cat-6 UTP Cable with Conduit 20 OFC Laying with Trenching 21 OFC Laying with RCC Road Cutting & Restoration 22 OFC Laying with Bitumen Road Cutting & Restoration 23 OFC Laying Inside Building with Conduit 24 Installation, Testing & Commissioning (Complete Wi-Fi System) 25 Comprehensive AMC/CAMC (Post Warranty)

BRR:9913302 Tender for Setting Up Work Stations And Internet Connectivity For It Staff At 6Th Floor In The New Civil Sectt. Building, Sec.-17, Chandigarh. (Pdg. E.I, Vrv/Vrf System And Elv Services I.E Lan, Epabx, Fire Alarm And Cctv System) (Pdg. Cctv System And Allied)

BRR:9911750 Tender for Supply, Installation, Commissioning And Maintenance Of 100 Mbps Enterprise Internet Leased Line Over Optical Fibre

BRR:9911581 Supply Of supply of interactive monitor 75 inches , supply and installation of 75 inches interactive touchscreen as per attached annexure. diago nal size: 75 inches (1.89 m).resolution: 3840 x 2160 pixels.panel type: ips.brightness: 400 nits.contrast r atio: 1200:1.touch technology: infrared (ir).touch pen type: passive pen..operating system: android 14 (f lash memory size: 64 gb).processor: octa-core (a73 x 4 + a53 x 4).memory: 8 gb ram, 64 gb internal stor age..connectivity: wi-fi 5 (802.11ac), bluetooth..media player option type: ops slot support.no. of touch: 40 points.audio in/out: stereo mini jack.stand type: wall mount..accessories included: power cord, remote controller, hdmi cable, touch pen, usb cable. warranty: 03 years. bidder should provide oem authorizatio n or dealership certificate or proof of purchase from oem or oem authorized vendor along with supply. sup plier to ensure that the offered product is supplied with valid oem`s warranty certificate. [ warranty peri od: 36 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

BRR:9910633 Bids Are invited for Nvr 32 - Nvr 32 Ch High Quality , Ip Camera - Ip Camera Hybird 8 Mp , Ptz Camera - Ptz Camera 8 Mp , Poe Switch 8 Port - Poe Switch 8 Port Giga , Hard Disk 10Tb - Hard Disk 10Tb Survillance , Cat 6 Cable 305 Mtr , Rj45 Connector , Poe Rack Big Size , Nvr Rack 24U , Junction Box , Installation , Fire Security Equipments Balls , Fire Security Equipment Fire Extinguisher , 25Kva Ups With Battery , Wifi Extender , Tv 65Inch Total Quantity : 655

BRR:9910572 Bids Are Invited For Wireless Access Point (V2) (Q2) Total Quantity : 50

BRR:9909599 Bids Are invited for Single Lane Flap Barrier , Multilane Flap Barrier , Mounting Pole , Face Finger Device Wifi , Rfid Encoder And Updater , Thin Proximity Card , Software With Perpetual License , Installation As Per Site Requirement Included In The All Products Total Quantity : 114

BRR:9909569 Bids Are Invited For Internet Bandwidth And Replication Service - Leased Line( Point To Point); Goverment Service Provider, Private Service Provider; Na; National Long Distance (Nld); 100

BRR:9909322 Bids Are Invited For Internet Bandwidth And Replication Service - Internet Leased Line; Private Service Provider, Goverment Service Provider; Class A, Unified; Unified; 300

BRR:9909137 Bids Are Invited For Windows Laptops With 1 Year Warranty , Laptop With Macos Operating System And 16 Gb Ram 256 Gb Ssd , Tablet With Ios Operating System And Wifi Plus Cellular , Bag For Windows Laptop , Bag For Macos Laptop Total Quantity : 13

BRR:9909105 Bids Are Invited For Internet Bandwidth And Replication Service - Internet Leased Line; Goverment Service Provider, Private Service Provider; Class A, Class B, Class C, Na; Na; 100

BRR:9908764 Bids Are Invited For Uno R3 Board , Arduino Nano , Esp32-Wroom-32D , Xiao Esp32c3 , Esp32 Cam , Nodemcu Esp8266 , Raspberry Pi 4B , Raspberry Pi Pico , Raspberry Pi Zero 2W , Teensy 4.1 , Camera Module 3 , Smart Vision Sensor , Temp And Humidity Sensor , Pir Motion Sensor , Ultrasonic Sensor , Ldr Sensor , Combustible Gas Sensor , Alcohol Sensor , Air Quality Sensor , Methane Sensor , Lpg Sensor , Propane Or Butane Sensor , Co Sensor , Hydrogen Sensor , Multi Gas Sensor , Soil Moisture Sensor , Barometric Sensor , Rc522 Rfid , As608 Fingerprint , 1Ch Relay , 4Ch Relay , 8Ch Relay , L298n Driver , Bts7960 Driver , Sg90 Servo , 150Rpm Dc Motor , Tb6600 Driver , Ws2812b Led Strip , Smart Wifi Bulb , Smart Plug , Smart Door Lock , Imx219 Camera , Zigbee Dongle , Hm-10 Ble , Rylr998 Lora , Sx1278 Lora , Portenta Gnss Shield , Male-Male Wires , Female-Female Wires , Male-Female Wires , Breadboard 830Pt , Power Module Mb102 , Microsd , Usb Cable A-B , Gpio Breakout , Uno Enclosure , Rework Station , Digital Multimeter , Logic Analyzer , 30V 5A Psu , Glue Gun 60W , Rc Tool Kit , Nvme Ssd , Sd Card Reader , 18650 Battery , Battery Charger , Lipo Battery , Bms Board , Tp4056 Module , Charger Discharger , A9g Gsm Board , Esp32s3 Sense , Esp32s3 Board , Voice Module , Rtl8720dn , Sma Wireless Transceiver Antenna , E220 Lora Uart , Bg95 Dev Board , 800L Gsm Module , Xiao Esp32s3 Gnss , 2.4 Inch Tft Touch , P1s Printer , Xiao Esp32s3 Ai , Esp32-C5 Devkit , Lcd1602 , Max30102 , Flex Sensor , Solenoid Lock , Push Button , Self Lock Switch , Toggle Switch On-On , Dpdt Toggle , Rocker Switch Led , Rocker Switch , Bo Motor , Dc Motor , Wifi Antenna , Wifi Router , Industrial Usb Hub , Industrial Switch , Ssd , Dual Usb Pendrive , Sd Reader Module , Pla Filaments , Abs Filaments , Asa Filaments Total Quantity : 1479

BRR:9908252 Bids Are Invited For Sitc Of Network Upgradation Devices Wireless Network Controller , Wi-Fi 6 Wireless Access Point , Cat 6 Utp Cable - Roll Of 305Mtr , Cat6 Rj45 Connector Box Of 100 Nos , 6 Core Single Mode Armoured Fiber Optic Cable , 10Gsfpfiber Module , 10Gsfpcopperrj45trans , Fiber Line Interface Unit , 9U Wall Mount Network Rack , 22U Network Rack Floor Standing , Single Mode Fiber Optic Pigtail , Lc To Lc Sm Ofc Patch Cord -1Mtr , Sc To Lc Sm Ofc Patch Cord - 1Mtr , Sitc Total Quantity : 2324

BRR:9907272 Supply Of adsl2+wifi(wireless) modem router wi , adsl2+wifi(wireless) modem router with following minimum specifications- wireless speed 150 mbps, support standard protocols such as ieee 802.11b, ieee 802.11n, ieee 802.11g, ieee 802.1d mac bridge, should have interface 4 numbers of 10/100mbps rj45 ports and 1 rj11 port, led indicators for lan, wan, power, internet. accepted make- d-link, tp-link or similar. [ warranty period: 30 months after the date of delivery ] ]

BRR:9906807 Tender for Installation And Commissioning Of New Lan Or Intranet Connectivity At Different Locations In Dhori Area With Ofc And Utp Cable Using I O Box , Managed Switches Etc With Firewall Used For Vpn Connectivity For The Officials With Maintenance Or Camc Fo

BRR:9905285 Tender for Estimate No. 1277/Ngp/2025-26: Providing Renovation To E.I, Lan & Networking, Epabx System, Cctv System, Fire Fighting System, Air Conditioning System, Heat Pump, Supply Arrangement & Lift To Superspeciality Hospital (G+4) Wing ‘A & Wing ‘C At Nagpur.

BRR:9905106 Installation Of Internet Cable, Cctv, Server, With All Necessary Equipment As A Part Of Re-Construction Of Office Premises Of Alipore Division, Phe Dte.- 1 Digital 16 Channel NVR with Multi port and remote acess 2 16 Channel poe switch with Gigabyte lan facility. 3 4TB Survilance HDD 4 LAN cable CAT 6E Camera and Network 5 CCTV Camera (Dome type) 6 CCTV Camera (Bullet type) 7 Labour charges for fitting all CCTV camera with wi-fi access points with all cable network necessary for both internet and CCTV installation. 8 CCTV special camera 9 AXE 95 as primary Router 10 AXE 75 as access to Point Router 11 Network Adopter 12 Internet wi-fi Router and NVR rack for wall mounting 13 One UPS 1.5 KV. For CCTV network during power break down. 14 Supply of 48 OLED Monitor Screen for CCTV survilance including charges for instalation etc. all complete, of Sony/Samsung/L.G./M.I 15 Supply , fitting and fixing of Stand fanof 4000 rpm of approved make and brand including the cost of fan, installation charges, and carriage etc. all complete as per direction of EIC.( rates to be quoted including the cost of fan, installation charges, carriage etc. but excluding GST. & Labour Welfare CESS) 16 Supply , fitting and fixing of cabin fan (wall mounted) of 4000 rpm of approved make and brand including the cost of fan, installation charges, and carriage etc. all complete as per direction of EIC.( rates to be quoted including the cost of fan, installation charges, carriage etc. but excluding GST & Labour Welfare Cess.) 17 Add 18% GST Rs. 18 Add 1% Cess Rs.

BRR:9903168 Tender for Purchase Of Function Generator, Dual Power Supply , Digital Multimeter, Digital Storage Oscilloscope, Digital Ic Trainer Kit , Purchase Of Function Generator, Dual Power Supply , Digital Multimeter, Digital Storage Oscilloscope, Digital Ic Trainer Kit , Function Generator: 0.2 Hz To 10 Mhz, Sine , Squire Triangle, Ramp, Pulse, Invert Ramp, Invert Pulse, Ttl, Dc, Output Voltage Amplitude 20 Vpp In All Waves, Symmetric Function, Sweep Function Control, Maximum Attenuation 60 Db, Modulation, Am, Fm, Pwm, Pam, Ask, Fsk, Amplitude And Frequency Display, Seperate Amplitude And Frequency Knobs , Dual Power Supply : Input 230V Ac, Output (-30V 0 +30V) Or 0-60V/3A, Internal And External Short Circuit Protection, Overload Protection, Output Display , Digital Multimeter : Voltage : Dc : 1000 Volts; Ac:1000 Volts; Accuracy: +_ 0.5% +3 Digit ; Ac Accuracy : +_ 1% + 3 Digit Current : Dc :10 Amps; Ac:10 Amps; Dc Accuracy: +_ 1.5% + 3 Digit; Ac Accuracy +_ 1.5% + 3 Digit Resistance : 40 M Ohm; Resistance Accuracy : +_ 1.5% + 3 Digit Capacitance : 1000 F; Capacitance Accuracy : +_5% + 5 Digit Cat Iii 600 Volts Safety Rating Bigger Display With Bright White Backlight Over Voltage Indicator Frequency And Temperature Measurement Voltage , Resistance, Continuity, Capacitance Measurement Input Terminal For Ac And Dc Current Measurements Upto 10 A Current Diode Test, Data Hold, Min/Max Ammeter And Voltmeter Included , Digital Storage Oscilloscope Bandwidth ::Dc To 50 Mhz No: Of Channels : 2+Ext Trig Memory Depth :2.5K At All Time Bases Sampling Rate : 1Gsa/S On All Channels Vertical Resolution: 8 Bits Input Sensitivity Range 2 Mv To 5V/Div Input Impedance : 1 M In Parallel With 2 providing fixing Measurements : Automated Measurements Of Common Parameters , Cursor Measurements And Fft Analysis Dedicated Keys : Quick Pan And Zooming , Math , Fft, Reference. Time Base Range : 5Ns To 50S/Div Time Base Accuracy : 50Ppm Frequency Counters : Counter Mode With Numeric Display , 10 Hz To 50Mhz, 6 Digit Resolution , 2 Channels Display : 7 In.(180 Mm) Widescreen Tft-Lcd Colour Display. Resolution : 480 Horizontal X 800 (Wvga) Active Tft Lcd Display System : Interpolation Sin (X)/X, Waveform Styles Dots, Vectors Persistance Off, 1 S, 2S, 5S Infinite Formate Yt And Xy. Connectivity : Usb Host And Device Maximum Usb Flash Drive Size ; 64 Gb Provision To Store Waveforms To Usb Flash Drive Warranty : 5 Years Standard Accessories To Be Supplied Along With The Instrument: One 10X Passive Probe Per Channel , Installation And Safety Manual , Documentation Cd, Applicable Desktop Software & Pc Course Software And Power Cord , Digital Ic Trainer Kit/Bread Board- 2 Nos , 14 Pin Zif Socket 2 Nos (Including Vcc & Gnd)- Logical Input Switches With Indicators - 10 Nos, Logical Output Indicators - 10 Nos , Ttl Clocks 1 Hz, 10 Hz, 1 Khz And Mono Pulse , Dc Power Supply, -5V +5V, +12V, 2 Digit Bcd To Seven Segment Display , Built-In Power Supply & Clock Generators , High Bright Leds For Input/Output Indication, Internal And External Protection

BRR:9902697 Supply Of Supply Of Materials Required For Replacement Of Damaged Part During Maintenance Of Internet Connectivitysupply Of Materials Required For Replacement Of Damaged Part During Maintenance Of Internet Connectivity,Supply Of Materials Required For Replacement Of Damaged Part During Maintenance Of Interne T Connectivity Of Jamalpur Workshop And Railway Main Hospital, Details Specifications As Per Annexure-A. [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:9902239 Supply Of all in one pc , supply of multi functional device make - hp intel core i5 processor 11th generation, model | hp 600 g6 aio i5 10500 win 11p 85123 odd wifi 21.5 or similar or better. [ warranty period: 30 months after the date of delivery ] ]

BRR:9901927 Supply Of Multi Sim Aggregator/High Speed Internet Bonding Routermulti Sim Aggregator/High Speed Internet Bonding Router,Multi Sim Aggregator/High Speed Internet Bonding Router With Low Latency, Supporting 4 Sim ( Any Isp), Wi-Fi Lan & Wi-Fi Output Plug & Play Service, Ethernet Port, With Accessories Like Dongle (04 Nos.) Compatible For Various Service Providers Or 04 Nos. Of Inbuilt Slot For Sim. Monitored And Controlled Through Tablets, Smart Phones & Laptops Over Wi-Fi/Lan Networks. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9901848 Tender for Providing Internet Connection Facility In Connection With The West Bengal Lagislative Assembly Election-26.

BRR:9901653 Bids Are Invited For Wireless Access Point (V2) (Q2) Total Quantity : 100

BRR:9901412 Bids Are Invited For Custom Bid For Services - Renewal Of Accops Web Vpn Software Licenses (Pac)

BRR:9901331 Bids Are Invited For Computer And Printer Accessories Cables, Converters And Adapters (Q3) , Usb Mouse , Wireless Mouse , Full Hd Web Camera , Speaker For Video Conf , Cctv Power Supply 16 Ch , Formatter Card For Brother Printer L 2320D , Duplex Tray For Brother Printer L2320d , Fuser Unit For Canon Printer , Teflon With Pressure Roller For Hp 1108 Printer , Ssd Card 256 Gb , Wifi Dongle , Led Monitor Power Supply Card Total Quantity : 24

BRR:9901197 Bids Are Invited For Broadband Internet And Wifi System With Ups Online Ups (?10 Kva) With Battery Conforming To Is 16242 (Part 1) (Q2) , P2p Wireless System , Self-Supporting Tower , Industrial Switch , Wifi Router , Fiber Cabling , Ups , Offgrid Solar Total Quantity : 16

BRR:9900648 Bids Are Invited For Wi-Fi Access Point (Ap) And Wireless Controller , Network Access Control Total Quantity : 201

BRR:9900638 Tender For Supply Of Electrical. Electronics, Miscellaneous Furniture & Chemical Glassware Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder Rs. P Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Total Amount With Taxes Total Amount In Words , Laying And Jointing Pvc Pipe. Heading , Electrical, Electronics & Miscellaneous Items , Inverter Ac 1.5 Ton With Stabilizer , A.C. 2 Ton With Stabilizer , Xerox Machine , Xerox Machine With Scanner , Printer With Scanner , Small Printer With Scanner , Distilled Water Plant , Smart Tv 65 , Smart Board , Celling Fan , Wall Fan , R.O. (Water Purifier) , Desktop 15 With Ups, Keyboard Mouse Complete Set. , Laptop I5 (Minimum 7 Gen.) , Provision Of Video-Conferencing Room In The Department To Give Evidence In The Court , Pencil Carbon Paper Blue, Size 42Cm X 33Cm , Paper A4 Size , Sealing Wax , Monitor Projector, Podium Projector Screen. (Seminar Room) , New Cartridge Laserjet M1136 Mfp , Refrigerator 9 Cu.Ft. 02 (Rhtc. 1+ C.M . Deptt. 1) , Multimedia Projector With Screen , Public Address System (2 Portable For Field Based , Fridge 654 Ltr , Refrigerator , Voltage Stabilizer , Stepdown Transformers , Audio Visual System For Physiology Lab , Xerox Machine Big Size , Image Class Mf Wifi All In Colour Laser Photo Copier Machine Printer , Alkaline R.O. , White Board With White Board Marker And Duster Set , Anti-Virus , Net Connection , Video Camera Memory Card -32Gb , Video Camera Battery , Video Camera Belt , Photo Printer With Scanner , Pencil Battery Charger , Travel Charger , Pen Drive-32 Gb , Glossy Paper-1000 Pcs (A4 Size) , Glossy Paper - (4 × 6) 1000 Pcs , Bluetooth (Hd) , Nikon D 85 Digital Camera , Hard Disk , Camera Battery D-3300 P2 , Inverter- Exide Tubular , Inverter Battery , Scanner , Tube Light 20 Watt , Led Cfl Bulb 20 Watt , Geyser (25 Liter) Robust Type , Tablet (Computer) , Water Chiller (20 Liter) Robust Type , Computer With Printer & Scanner , High-Definition Tv 75 , Furniture & Miscellaneous Items , Book Shelve (Steel Glass Almirah) , Executive Table , Table , Steel Almirah , Cabinet Locker (20 Cabinet Size) , Chairs , Office Table , Executive Chair , Waiting Chair 3 Seater , Student Desk For Postmortem Demonstration , Single Bed Iron Cot , Single Bed Mattress , Study Table With Storage , Chair For Students , Iron Rack For Book , Sofa 3+2 , Dining Table & Chair , Metal Almirah , List Of Doctors Board , Chair (Comfortable) , Toilet Bucket & Mug , Apron , Chemicals & Glassware , Eosin 250Ml , Haematoxylene 250Ml , Xylene 500Ml , Parafin Wax (580-600C) 2 Kg , Absolute Iso Propyl Alcohol 2.5L , Dpx Mount 250Ml , Formalin 5 L , Distilled Water 10 L , Rapid Pap Stain Kit , Geimsa Stain 250 Ml , Surgical Spirit 2.5Lit , Egg Albumin Powder 500 Gm , Glucose Powder 500 Gm , 1% Ammonium Oxalate 500Ml , Wbc Diluting Fluid 500Ml , Rbc Diluting Fluid 500Ml , Xylocaine 1% Injection 30Ml , Glass Slide 50 , Cover Slip (22 X 60 Mm) Pkt , Disposable Syringe (10 Ml) Box , Carbolic Acid Litre , Lead Oxide Bottle , Cotton Bundle , Spirit Ltr , Glycerol Ltr. , Formalin Ltr. , Scalpel Blade , Surgical Mask , Hand Wash , Surgical Gloves , Size- No. 7 , Hand Sanitizer , Thread For Body Stitching , Bleaching Powder Kg , Castor Oil Ltr. , Organo Phosphorus Sample Pack , Iodine Solution Lime Ml , Lime Kg , Dropping Bottles: 60 Ml , Coverslip: 18 Mm , Capillary Tube , Glass Slides , Syringe: 5 Ml , Syringe: 2Ml , Annual Maintenance Contract % , Cmc % Total In Figures 0.0 0.0 Inr Zero Only 4.0 Construction Of Chamber For 100Mm Sluice Plates Item5 10.0 Nos Quoted Rate In Figures Select 0.0 0.0 Zero Only Quoted Rate In Words Inr Zero Only

BRR:9899150 Bids Are Invited For Upgradation C Us Network Wifi Access Point And Access Switch Total Quantity : 1

BRR:9898864 Bid Are Invited For Short Term Cab & Taxi Hiring Services - Premium Suv; Local; From Tezpur Or Solmara Of Charduar Or Misa Camp Local Duties Including Missamari 12Hrs Or 120Kms , Short Term Cab & Taxi Hiring Services - Sedan; Local; From Tezpur Or Solmara Of Charduar Or Misa Camp Local Duties Including Missamari 12Hrs Or 120Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Anywhere (Plain/ Hill) (One Way/Both Way) Outstation Duties 250 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Anywhere (Plain/ Hill) (One Way/Both Way) Outstation Duties 250 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Anywhere (Plain/ Hill) (One Way/Both Way) Outstation Duties 400 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Anywhere (Plain/ Hill) (One Way/Both Way) Outstation Duties 400 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Anywhere & Back (Plain/ Hill) (One Way/Both Way) Outstation Duties 400 To 700 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Anywhere & Back (Plain/ Hill) (One Way/Both Way) Outstation Duties 400 To 700 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Guwahati Or Narangi Cantt Or Guwahati Airport/ Sadilpur/ 240 Transit Camp (One Way) Outstation Duties 200 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Guwahati Or Narangi Cantt Or Guwahati Airport/ Sadilpur/ 240 Transit Camp (One Way) Outstation Duties 200 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Misa Camp To Guwahati Or Narangi Cantt Or Guwahati Airport/ Sadilpur/ 240 Transit Camp & Back (Both Way) Outstation Duties 400 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur Or Solmara Or Misa Camp To Guwahati Or Narangi Cantt Or Guwahati Airport/ Sadilpur/ 240 Transit Camp & Back (Both Way) Outstation Duties 400 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Changsari Or Rangiya (One Way) (Plain/ Hill) Outstations Duties 200 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur Or Solmara Or Misa Camp Or Charduar To Changsari Or Rangiya (One Way) (Plain/ Hill) Outstations Duties 200 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Charduar Or Thakurbari Of Misa Camp To Tenga Or Bomdila/ Rupa/ Gaccham (One Way) (Plain/ Hill) (Via Bct/ Oksrt) Outstations Duties 250 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solmara Or Charduar Or Missamari/ Misa Camp To Tenga Or Bomdila/ Rupa/ Gaccham & Back (Both Way) (Plain/ Hill) (Via Bct/ Oksrt) Outstations Duties 500 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solamara Or Charduar Or Thakurbari Or Misa Camp To Tawang Or Km- 6 (One Way) (Plain Or Hill) (Via Bct/ Oksrt) Outstations Duties 450 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur Or Solamara Or Charduar Or Thakurbari Or Misa Camp To Tawang Or Km-6 & Back (Both Way) (Plain Or Hill) (Via Bct/ Oksrt) Outstations Duties 900 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Itanagar To Tezpur/Solmara/Charduar/Misa Camp Outstations Duties 150Kms (One Way) , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Itanagar To Tezpur/Solmara/Charduar/Misa Camp Outstations Duties 150Kms (One Way) , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur To Hattigor (Point To Point) Outstation Duties 115 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur To Hattigor (Point To Point) Outstation Duties 115 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur To Tamulpur Or Darranga (Point To Point) Outstation Duties 155 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur To Tamulpur Or Darranga (Point To Point) Outstation Duties 155 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur To Rangiya Or Changsari Or Borjhar Outstation Duties 250 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur To Rangiya Or Changsari Or Borjhar Outstation Duties 250 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Solmara To Guwahati (Point To Point) Outstation Duties 220 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Solmara To Tawang (Point To Point) Outstation Duties 425 Kms , Short Term Cab & Taxi Hiring Services - Premium Suv; Outstation; From Tezpur To Umroi (Point To Point) Outstation Duties 220 Kms , Short Term Cab & Taxi Hiring Services - Sedan; Outstation; From Tezpur To Umroi (Point To Point) Outstation Duties 220 Kms

BRR:9898444 Bids Are Invited For Esm Waiting Room And Office , Pvc Paneling , Electric Work Including Labour Charges , Ceiling Led Lights , Flooring Tiles With Installation , Ac One And Half Ton Split Hot And Cold With Stablizer And Installation , Office Table , Office Revolving Chair , Visitor Chair , Notice Board Three And Two , Glass Boards Printed With Hd Vinyl , Water Dispenser With Two Bottles , News Paper Stand And Magazine Rack , Aluminium Doors With Glass , Glass Windows With Aluminium Framing , Mason Works Including Minor Repairing , Roller Zebra Blinds , Sofa Two Seater , Sofa Three Seater , Centre Table , Peg Table , Paint Work Interior And Exterior , Digital Wall Clock , Foot Mats , Smart Led Tv , Wooden Mobile Charging Station , Electrical Work Incl Labour Fittings , Name Plate , Pvc Planters With Plants , Small Table Plants With Planters , Fire Extinguisher One Kgs , Abc Powder First Aid Box , Fire Alarm Sensor Based , Wifi Router And Extender , Carpet Seven And Five Feet , Inverter Twenty Four Volts , Battery , Inverter Trolly , Calendar Framing , Automatic Air Fresher Machine , Washroom Tiles , Ceiling Lights , Toilet Sheet , Washbasin With Pedestal , Pvc Including Installations , View Cutter Of Fiber Sheet And Iron Pipes Total Quantity : 3080

BRR:9898208 Purchase Of Machine & Equipment, Misc. Item,Book And Journal,Chemical,Glassware,Chart And Model, Other Equipment And Furniture &Repaire Maintenance. - Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Principal, Shaheed Nirmal Mahto Medical College, Dhanbad Name Of Work: Repair Maintenance Contract No: 487/Snmmc Bidder Name : Price Schedule(This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl.No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Basic Rate In Figures To Be Entered By The Bidder Rs. P Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Total Amount Total Amount With Taxes Total Amount In Words Laying And Jointing Pvc Pipe. Heading Mortuary Freezer Tube Light Inverter+Battery Servicing Online Ups – 2 Kva Online Ups – 4 Kva 30 Kva Generator Repair And Change Of Battery Water Purifier Computer Laptop Xerox Machine Samsung Multi Xpress 2200 Xerox Hp Laserjet 1020 Plus Printer Printer Steriliser 17 Ophthalmoscope 18 Retinoscope 19 Indirect Ophthalmoscope 20 Schiotz Tonometer 21 Change Of Lan Switch 22 Provision Of Internet Connection 23 Inverter Point Wiring With All Accessories Per Mtr. 24 Point Wiring With All Accessories 1.5 Sq.Mm/Mtr. 25 Point Wiring With All Accessories 2.5 Sq.Mm/Mtr. 26 Point Wiring With All Accessories 4 Sq.Mm/Mtr. 27 Point Wiring With All Accessories 6 Sq.Mm/Mtr. 28 Point Wiring With All Accessories 10 Sq.Mm/Mtr. 29 3 Ph. Cable Wiring For Machine Equipments 25 Sq.Mm/Mtr. 30 3 Ph. Cable Wiring For Machine Equipments 35 Sq.Mm/Mtr. 31 3 Ph. Cable Wiring For Machine Equipments 95 Sq.Mm/Mtr. 32 3 Ph. Cable Wiring For Machine Equipments 120 Sq.Mm/Mtr. 33 3 Ph. Cable Wiring For Machine Equipments 300 Sq.Mm/Mtr. 34 Chemical Earthing For Machine Equipments 35 Copper Strip For Earthing Connection Per Mtr. 36 Name Plate Rewriting Per Sq. Inch 37 Pvc Pipe ½” For Bathroom With Supply And Fixing 38 Pvc Pipe ¾” For Bathroom With Supply And Fixing 39 Pvc Pipe 1” For Bathroom With Supply And Fixing 40 Pvc Pipe 2” For Bathroom With Supply And Fixing 41 Supply And Fixing Of Valve ½” 42 Supply And Fixing Of Valve ¾’” 43 Supply And Fixing Of Valve 1” 44 Supply And Fixing Of Valve 2” 45 Drain Pipe For Wash Basin

BRR:9898019 Tender for Supply Of Computer & Accessories. , Supply Of Computer & Accessories. Dekstop Computer Form Factor-Micro Tower Or Bigger, Processor-Intel Core Tm I5- 14-Th Generation (14 Cores, 20 Threads) With Intel Uhd Graphics Or Higher (Preferable 14600), Memory-16Gb (2*8 Gb) Ddr5-5600 Mhz Or Better, Memory Expandability Up To 64 Gb With 2 Dimm Slots, Chipset-H670, H770and Q670 Or Higher, Storage-512Gb Nvme M.2 Ssd Or Better, Graphics-Integrated, Audio-Integrated Audio Controller With Internal Speaker Of At Least 2W , Operating System-Dos/Linux, Networking-Integrated 10/100/1000 Ethernet Controller/Wi-Fi 6 Rtl8t Ac2x2 +Bt 5.3Ww, Ports-Video: 1 Hdmi 1.4, 1 Vga/1 Display (Video Ports Should Be Functional Inspite Of Installation Of Graphic Card If Required)/Total Usb Port 8 NoS, Minimum 6 Usb In Front Of Cpu, 2 Usb 3.2 Gen 2 (Min 10 Gbps Port 3 Sata Ports, 1 Type C Port, 1 Serial Port, Slots Bays-Minimum 4 Including 1 Pci And 2 M.2 Slots 2X3.5 Internal, 1 External Bay, Keyboard-Usb Wired Keyboard, Mouse-Usb Optical Wired Mouse , Power Supply-180 W-260 W With 92% Efficiency Or Better , Volume And Weight-No More Than 16 L And Less Than 5Kg, Security-Tpm 2.0/Integrated Intrusion Sensor/Integrated Cable Lock Slot For Keyboard And Mouse/Drive Lock For Hard Disk, Certification-Fcc, Ce, Rohs, Ul, Epeat, Energy Star/Iso 9001, 14001, 20001, 27001, 45001, 50001 For Oem/Top 3 Oem As Per Latest Ids Report, Display-21.5 Monitor With Resolution Of 1920X1080 Same Make As Desktop With Hdmi, Vga And Tco 09, Warranty-3 Years Onsite, Additional Storage In Each Desktop-Ssd:Wd 512 Gb Sata Blue , Lan-Tp-Link 24 Port Gigabyte Switch- Tl- Sg1024de + Lan Installation For 10 Computers , Ups -Apc 1000 Va ,

BRR:9896174 Tender for Purchase Of Sports Item , Purchase Of Wifi , Vinex Gymnastic Spring Board - Super Vgym - Spbsup

BRR:9895321 Tender For Work Of Establishment Of War Room In The Conference Hall Of Dmc (Infra), Bmc, At Head Office - Work of establishment of War Room in the conference Hall of DMC (infra), BMC, at Head office. 2 Procurement of Television of 86 inch size as per technical specification attached seperately 3 Procurement of Television of 32 inch size as per technical specification attached seperately 4 Procurement of Desktop Computer with keyboard & mouse as per technical specification attached seperately 5 Router 6 Wifi 7 System analyst (2shift per day for 6 months). required for monitoring andpreparing the report for a period of 6 months(for 2 nos =2*6=12)

BRR:9895205 Tender for Supply Of Computer And Printer And Other For Gp Office Under 15 Fc At Pilkhod Tal Chlisgaon Dist Jalgaon , All In One Core I3 13Th 8Gb 512Gb 27 Inch Win 11 Led 2Gb Graphics 1 Yr Warranty With Gst , Printer Blazing Speed -Prints At 34 Pages Per Minute Eco-Friendly -Automatic Two-Sided Printing Saves Paper Effortlessly Seamless Connectivity - Supports Usb 2.0, Lan, Wifi, Wifi Direct, Air Print, Mopria,And Mobile Connect Incre , Mobail 5G,6Gb,128Gb

BRR:9894756 Bids Are invited for Solar Panel - Supply Of Solar Panels Required For 15Kwp On-Grid Solar Power Plant, Comprising Of Monocrystalline Bifacial Topcon/Hjt Glass-Glass Modules,Salt-Mist Resistant Shall Have High Efficiency And Superior Performance In Limited Space, As They Are Manufactured Using Single-Crystal Silicon, Resulting In Uniform Structure And Improved Electron Mobility. , On Grid Inverter - Supply Of 15Kw Grid Tie Inverter Suitable For 15 Kw Solar Power Plant,Is Typically A Three-Phase,One Neutral Transformerless Inverter Designed To Efficiently Convert The Dc Output Of The Solar Panels Into Ac Power Compatible With The Grid.The Inverters Shall Operate At High Efficiency,Support A Wide Mppt Voltage Range Around 500 To 1000 V Dc And Have Multiple Mppt Trackers To Optimize Power Output From Different Panel Strings With Built-In Protections Such As Anti-Islanding,Overvoltage,Overcurrent,And Temperature Monitoring To Ensure Safe Operation With Communication Options Like Wifi, Ethernet, Or Rs485 Allow Remote Monitoring And Data Logging. , Mounting Structure - Supply And Fabrication Of Mounting Structure For The Above, Is Made Of Hot-Dip Galvanized Iron C Channel Width 40Mm,Thickness-5Mm, Which Offers Excellent Corrosion Resistance And Mechanical Strength Withstand The Wind At Coastal Area. The Galvanization Thickness Is Typically Above 80 Microns With A Zinc Coating Of Graster Than Or Equal To 550 Gsm, Making It Suitable For Long Term Outdoor Use Under Various Climatic Conditions.The Structure Is Designed For Fixed Installations, Depending On The Site. It Supports Both Landscape And Portrait Orientations For Monocrystalline Pv Modules, Typically . The Design Complies With Relevant Is Codes For Structural Safety And Solar Application Standards.Inclusive Of Suitable Ss Bolts, Nuts, Accessories Etc). , Pedestal - Civil Work For Constructing Reinforced Concrete Pedestals Approx 300Mmx300mmx450mm Each Above Ground Level And 450Mmx450mmx600mm Each Below Ground Level T

BRR:9894555 Bids Are Invited For Distribution Switch With 24X10g Sfp Port With 03 Years Warranty , Wireless Controller With 3 Years Warranty , Networking Rack , 48 Ports Managed Non Poe Access Switch With 1 Year Warranty , 24 Ports Managed Non Poe Access Switch With 1 Year Warranty , 24 Ports Managed Poe+ Access Switch With 1 Year Warranty , Controller Based Indoor Wireless Access Point With 1 Year Warranty Total Quantity : 65

BRR:9893873 Bids Are Invited For Annual Maintenance Service - Desktops, Laptops And Peripherals - Projector; Sony , Annual Maintenance Service - Desktops, Laptops And Peripherals - Projector; K- Yan(Community Computer) , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Dell , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Hp , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Acer , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Foxtrot (I5, 16Gb Ram, 1 Tb Hdd , Annual Maintenance Service - Desktops, Laptops And Peripherals - All In One Pc; Hlbs Intel Core I7 , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer; Canon Mf 226 Dn , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer; Canon Mf 3010B , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer; Canon Mf 237W , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer; Hp Color Laser Jet , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer; Samsung Proxpress Sl-M4030 Nd , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer; Brother All In One Color (E79051d3n382425) , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner; Kodak , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner; Epson , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laptop; Dell , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laptop; Asus , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laptop; Apple Ipad Pro 11 , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laptop; Hp , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laptop; Acer , Annual Maintenance Service - Desktops, Laptops And Peripherals - Lan System; Network Points , Annual Maintenance Service - Desktops, Laptops And Peripherals - Lan System; Switches (24 Port) , Annual Maintenance Service - Desktops, Laptops And Peripherals - Lan System; Switches (45 Port) , Annual Maintenance Service - Desktops, Laptops And Peripherals - Lan System; Wi Fi Points , Annual Maintenance Service - Desktops, Laptops And Peripherals - Epbax; 45 Points, 4 Port Voice Mail (Nfc) And Mail Distribution Frame) , Annual Maintenance Service - Desktops, Laptops And Peripherals - Online Ups 15 Kva; R S Power Ltd , Annual Maintenance Service - Desktops, Laptops And Peripherals - Hp Server; Mid Range Server Hp Dl 360 , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups; Ups 230V , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups; Ups 600Va , Annual Maintenance Service - Desktops, Laptops And Peripherals - Digital Writing Tablet; Xp Pen Sharptech Av , Annual Maintenance Service - Desktops, Laptops And Peripherals - Interactive Panel With Cpu; Senses 86 Inch Display Interactive Panel , Annual Maintenance Service - Desktops, Laptops And Peripherals - Video Conferencing Camara; Firstouch Point To Point Non Upgradable Video Conferencing End Point

BRR:9893826 Bids Are Invited For Custom Bid For Services - Item Code 1058533 Hiring Of New Wifi Set Top Box And Related Accessories As Per Scope Of Work (Bidder Has To Quote Lumpsum Price For Estimated Qty Of 1073 Nos Including Gst) , Custom Bid For Services - Item Code 1042126 Providing The Dth Services Of Fta Channels As Per Trai Guidelines As Per Scope Of Work (Bidder Has To Quote Lumpsum Price For Estimated Qty Of 2030 Nos Including Gst) , Custom Bid For Services - Item Code 1042127 Providing The Dth Services Of Hd Channels As Per Trai Guidelines As Per Scope Of Work (Bidder Has To Quote Lumpsum Price For Estimated Qty Of 116 Nos Including Gst) , Custom Bid For Services - Item Code 1058219 Annual Maintenance Charges For Dth Connections As Per Scope Of Work (Bidder Has To Quote Lumpsum Price For Estimated Qty Of 2146 Nos Including Gst)

BRR:9893731 Bids Are Invited For Internet Bandwidth And Replication Service - Internet Leased Line; Private Service Provider; Class A, Class B, Class C; Na; 50

BRR:9892707 Bids Are Invited For Custom Bid For Services - Internet Bandwidth Services With Microwave Connectivity Between Two Sites

BRR:9892560 Bids Are Invited For Dark Fiber Lease Service - Point To Point Based - Dry Lease; Single Mode; Intracity; 1; Aerial, Underground; Na; Na

BRR:9892247 Bids Are Invited For Layer 2 Access Switch (V2) , Wireless Access Point (V2) , Cat 6 Information Outlet Total Quantity : 407

BRR:9890885 Supply Of All In One Desktop Pc Intel Core I5all In One Desktop Pc Intel Core I5,All In One Desktop Pc Intel Core I5 Configuration :Processor: Intel 12Th Generation Core I5-12400T, 1. 7 Ghz, 18 Mb Cache, 6 Cores Chipset: Intel B660 Series, Graphics: Intel Integrated Uhd Graphics 730 Memory: 16 G B, Ddr4, 2666Mhz Ram Expandability Upto 64 Gb Ssd: 512 Gb, Webcam: Fhd, Speakers: 2 Nos. Monitor: 21.5? No N Touch Ips 1920 X 1080 Pixels Wireless Connectivity: Wi-Fi 802.11Ac, Bluetooth: 4.2 Version Ethernet: 10/100/100 0 On Board Integrated Gigabit Port Bluetooth: 4.2 Version Ports: 6 Usb Ports, 1 Serial Port, 1 Hdmi Port And 1 Dp Por T Mouse: Wired, Optical Scroll; Keyboard: Wired, Standard Operating System: Windows 11 Professional, Certification S: Windows Oem Warranty: 3 Years [ Warranty Period: 36 Months After The Date Of Delivery ] ]

BRR:9890771 Supply Of supply of qled smart television set , qled smart television set, with size minimum 50 inches, with google os, bluetooth, wifi con nectivity, dolby audio suitable for video conferencing in sony, lg, samsung or similar brand with one year warranty period. the following make and models of smart tvs are preferred. (1) sony 126 cm (50 inches) b ravia 2m2 series 4k ultra hd smart led google tv k-50s22bm2. (2) samsung 138 cm (55 inches) vision a i 4k ultra hd smart qled tv qa55qef1aulxl. (3) lg 139 cm (55%u201d) 4k uhd ai ua8250 smart tv wi h %u03b17 ai processor gen8, filmmaker mode with dolby atmos, 2025 or similar. bidders to provide exa ct make and model of the offered product. [ warranty period: 12 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

BRR:9890517 Tender for Providing Internet Facility At Training Center, Commissioning, Dcrc And Counting Venue For Tamluk Sub-Division In Connection With Parliamentary General Election -2024 , Providing Internet Facility At Commissioning, Dcrc And Counting Venue For Tamluk Sub-Division In Connection With West Bengl Lagislative Election -2026 , Internet Leased Line- 300 Mbps , Fiber Optic Cable , Ethernet Cable Cat 6 , Fiber Optic Connector , Rj45 Connector , Ethernet Gigabit Switch 4 Port , Ethernet Gigabit Switch 8 Port , Ethernet Gigabit Switch 24 Port , Router 300 Mbps , Load Balancer , Gigabit Router , Patch Cord , 1*8 Plc , Manpower Support

BRR:9890514 Tender for Providing Internet Facility At Training Center, Commissioning, Dcrc And Counting Venue For Tamluk Sub-Division In Connection With Parliamentary General Election -2024 , Providing Internet Facility At Commissioning, Dcrc And Counting Venue For Tamluk Sub-Division In Connection With West Bengl Lagislative Election -2026 , Internet Leased Line- 300 Mbps , Fiber Optic Cable , Ethernet Cable Cat 6 , Fiber Optic Connector , Rj45 Connector , Ethernet Gigabit Switch 4 Port , Ethernet Gigabit Switch 8 Port , Ethernet Gigabit Switch 24 Port , Router 300 Mbps , Load Balancer , Gigabit Router , Patch Cord , 1*8 Plc , Manpower Support

BRR:9890512 Tender for Providing Internet Facility At Training Center, Commissioning, Dcrc And Counting Venue For Tamluk Sub-Division In Connection With Parliamentary General Election -2024 , Providing Internet Facility At Commissioning, Dcrc And Counting Venue For Tamluk Sub-Division In Connection With West Bengl Lagislative Election -2026 , Internet Leased Line- 300 Mbps , Fiber Optic Cable , Ethernet Cable Cat 6 , Fiber Optic Connector , Rj45 Connector , Ethernet Gigabit Switch 4 Port , Ethernet Gigabit Switch 8 Port , Ethernet Gigabit Switch 24 Port , Router 300 Mbps , Load Balancer , Gigabit Router , Patch Cord , 1*8 Plc , Manpower Support

BRR:9888010 Supply Of 3D Printer With Ams/Cfs (Automatic Material System Or Creality Filament System, Including Filament Material)3D Printer With Ams/Cfs (Automatic Material System Or Creality Filament System, Including Filament Material),3D Printer With Ams/Cfs (Automatic Material System Or Creality Filament System, Including Filament Materi Al) Or Equivalent. Additionally, Tpu Filament Of 1 Kg Each For Four Colors (Total 4 Kgs), With 2 Year Extended Warranty. Spec Ifications: Body: Build Volume: 256 X 256 X 256 Mm3 Or Higher, Shell: Plastic & Glass Or Premier , Toolhead: Extruder Ge Ars: Steel, Nozzle: Stainless Steel, Speed Of Print: Top Speed Of 500 Mm/S Or Higher. Heat Bed: Max Build Plate Temperatur E: 100 Centigrade Or Higher. Cooling: Part Cooling Fan: Closed Loop Control, Hot End Fan: Closed Loop Control, Mc Board C Ooling Fan: Closed Loop Control, Chamber Temperature Regulator Fan: Closed Loop Control, Auxiliary Part Cooling Fan: Cl Osed Loop Control, Air Filter: Activated Carbon Filter Or Equivalent. Supported Filament: Pla, Petg, Tpu, Pva, Abs, Asa, P A, Pc, Pet With Multi-Color Capability Of Minimum 16 Colors. Sensors To Be Available: Filament Runout Sensor, Filament O Dometry, Power Loss Recover Chamber Monitoring Camera: Low Rate Camera 1280 X 720 Time Lapse Supported Or Equiv Alent. Electronics: Display: 2.7-Inch 192 X 64 Screen Or Bigger Screen, Connectivity: Wi-Fi/ Bluetooth/Wired Connection, Sto Rage: Micro Sd Card, Control Interface: Button, Mobile App, Pc Application Led Lights: Should Be Available. Software Update Support: Guaranteed Bug Fixes And Feature Updates. Guaranteed Security Patch Updates. (Specification Enclosed In Docu Ment ) [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9887816 Supply Of supply & fitment of wireless controlled advanced conferencing system chairman unit(1 nos.) along with wireless micriphone (14 nos.) model-dcw8501cx & dcw8502dw, mixing wi-fi lifier (1 nos) dcw8503r along with model ps 4009d wall mount speaker with all connected with 8k hdmi cable with arc supported splitter 8 port (6 nos.), make ahuja, philips or simillar. , supply & fitment of wireless controlled advanced conferencing system chairman unit(1 nos .) along with wireless micriphone (14 nos.) model-dcw8501cx & dcw8502dw, mixing wi-fi amplifier (1 n os) dcw8503r along with model ps 4009d wall mount speaker with all connected with 8k hdmi cable wit h arc supported splitter 8 port (6 nos.), make ahuja, philips or simillar. [ warranty period: 30 months aft er the date of delivery ] ]

BRR:9887390 Tender for Purchase Of Vc System & Other Accessories , Vc System & Other Accessories , Point To Point Video Conferencing System , Projector , 21 Inch Touch Monitor , Host Usb-C & Usb-A 3.0 100M Extender Over Hdbaset , Hdmi 40M Extender Over Ethernet , 4K 4X4 Hdmi Matrix Switcher

BRR:9886629 Bids Are invited for Optically Bonded Smart 4K Interactive Display With Superior Touch Sizes 75 Inch - Hardness I Anti Glare And Anti Fingerprint Glass In Built Android 8 0 Ram 4Gb Rom 64Gb 10 Points Touch In Android 20 Points Touch In Windows Smart Object Recognition And Responsive Multi Touch In Glass Touch Technology Wide Angle Cameras Fhd With Fov Of 90 Degrees Four Microphones With Pickup Range 8 Mtr Having Eco Cancellation Beamforming Noise Reduction 2 X 15W Speakers In Built Wi Fi Multiple Inputs Outputs For Connectivity Inbuilt Software For Casting Broadcasting Display Remote Management All Os Compatible Win Ios Android Advance Whiteboarding Features With Onscreen Annotation 3 Years Warranty , Ops 1 - 4K Resolution Intel I5 12Th Gen With Intel Uhd Graphics Or Better 16 Gb Ram X 1 Ddr4 256 Gb Ssd Memory Pre Install Win 11 Pro English With License , Wireless Presentation Solution 1 - Ready To Project Min Two Devices At Once Hdmi Dongle No Software Agent Driver Installation Independent Network Use Or Can Able To Connect To Arai Network Platform Independent Supported Pc Resolution Xga Wxga Wxga Uxga Hd Fhd Uhd Hdmi 720P 1080P 2160P 4K Supported Os Windows 7 8 10 Mac Osx 10 9 10 10 10 11 Certificate Fcc Ce Warranty 3 Years Make Model Cloud Walker Airstream Duo Hdmi Benq Aver , Desktop Cable Cubbies 1 - Hydraulic Mechanism With Smooth Opening Includes 2 Power 2 Data Hdmi 4K Audio Usb , Hdmi Cables 10 Mtr 1 - Cables Must Be With Connectors Mountable In Cable Cubby , Installation Charges 1 - Installation Charges , Optically Bonded Smart 4K Interactive Display With Superior Touch Sizes 65 Inch 2 - Hardness I Anti Glare And Anti Fingerprint Glass In Built Android 8 0 Ram 4Gb Rom 64Gb 10 Points Touch In Android 20 Points Touch In Windows Smart Object Recognition And Responsive Multi Touch In Glass Touch Technology Wide Angle Cameras Fhd With Fov Of 90 Degeers Four Microphones With Pickup Range 8 Mtr Having Eco Cancellation Beamforming Noise Reduction 2 X 15W Speakers I

BRR:9886447 Bids Are invited for Wireless Access Point , 24 Port Poe Switch , Installation , Could Based Controller Subscription For Ap Switches For 1 Year , Any Small Pin Standard Adapter With 12V Dc, 2.5A Rating For Access Point Total Quantity : 26

BRR:9886012 Bids Are Invited For Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Fault Repair Teams (Frt) For Maintenance Of Ofc Routes In Km Under Madikeri Gonikoppa (Virajpet) Areas Of Madikeri Oa; Refer Details In Atc , Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Hdd Machine In Frt Areas, For Maintenance Of Ofc Routes Under Madiker Gonikoppa (Virajpet) Areas Of Madikeri Oa On Kilometer Basis; Refer Details In Atc , Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Earth Excavator Machine In Frt Areas, For Mtce Of Ofc Routes Under Madikeri Gonikoppa (Virajpet) Areas To Deploy On Hourly Basis For 20 Hours Per Month ..

BRR:9886011 Bids Are Invited For Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Fault Repair Teams (Frt) For Maintenance Of Ofc Routes In Km Under Hunsur, Kuvempunagar, Chamarajanagar And Nazarbad Areas Of Mysuru Oa; Refer Details In .. , Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Hdd Machine In Frt Areas, For Maintenance Of Ofc Routes Under Hunsur, Kuvempunagar, Chamarajanagar And Nazarbad Areas Of Mysuru Oa On Kilometer Basis; Ref.. , Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Earth Excavator Machine In Frt Areas, For Mtce Of Ofc Routes Under Hunsur, Kuvempunagar, Chamarajanagar And Nazarbad Areas Of Mysuru Oa To Deploy On Hourl..

BRR:9886010 Bids Are Invited For Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Fault Repair Teams (Frt) For Maintenance Of Ofc Routes In Km Under Mandya Oa Areas; Refer Details In Atc , Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Hdd Machine In Frt Areas, For Maintenance Of Ofc Routes Under Mandya Oa Areas On Kilometer Basis; Refer Details In Atc , Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network - Hiring Of Earth Excavator Machine In Frt Areas, For Mtce Of Ofc Routes Under Mandya Oa Areas To Deploy On Hourly Basis For 20 Hours Per Month Over Contract Period: ..

BRR:9885653 Bids Are Invited For Internet Bandwidth And Replication Service - Internet Leased Line; Goverment Service Provider, Private Service Provider; Class A; National Long Distance (Nld); 1000 Mbps (1Gbps) Internet Bandwidth (1:1) And High-Quality Symmetric Bandwidth

BRR:9885634 Bids Are invited for Upgradation Of Alcatel Lucent Oxe Epabx From V 11.2 To V R 100 Or Latest , Clip Licenses Addon To Alcatel Lucent Epabx Analog Lines , Operator Console Software Pc Based With Associated Handset , Pc For Operator With Associated Headset , Sip To Pri Gateway With Soft Ether Vpn , Line Man Test Phone Total Quantity : 312

BRR:9885623 Bids Are Invited For Annual Maintenance Contract For Network Security Devices Annual Maintenance Service - Desktops, Laptops And Peripherals Cluster Outsourcing For Maintenance Of Landline And Broadband Network – Ofc Network

BRR:9885308 Bids Are Invited For Pt Wi Fi Camera , Cctv Camera , Foldable Ladder 6 Point 2 Mtr , Foldable Ladder 3 Point 8 Mtr , Foldable Multi Purpose Ladder , Rope Plastic 3 Cm , Rope Plastic 2 Cm , Vehicle Siron , Roof Mounted Universal Totating Light , Nail Base Vehicle Stopper , Poket Body Camera , Bolt Cutter , Night Vision Glass , Gas Mask Total Quantity : 25

BRR:9885276 Bids Are Invited For Nvr Or Dvr Dvr 4 Channel , Nvr 16 Channel , Wireless Access Point , Dc To Ac Converter , Cat 6 Cable , Poe Switch , Output Connector , Hdmi To Av Convertor , Smart Box Total Quantity : 133

BRR:9885199 Bids Are Invited For Tools And Equipment Chair And Table For The Instructor , Crimping Tool Rj-45 , Digital Web Cam High Resolution 3.1 Megapixel Or Higher , Digital Multimeters 3.5-Digit Handheld Type. , Lan Tester Utp Cat5 Cable Tester Rj 45 , Mini Dongle For Bluetooth Devices Connection Usb , Wi Fi Router With Wireless Connectivity , External Hard Disk 1 Tb , Patch Panel 24 Port , Punching Tool For Punching Rj 45 Socket With Cat 5 Cable , All In One Printer A4 Size , Headphone Mic Set Wired , Screwdriver Set , Switch 24 Port Total Quantity : 81

BRR:9885072 Bids Are Invited For Poe Switch 8 Port Poe Switch 8 Port , Rj 45 Ethernet Cable , Ip Cameras , Dc To Ac Converter , Switch Board 4 Plug 5A , Electric Wire Single Core , Nvr 16 Channel , Wifi Extender Total Quantity : 126

BRR:9884801 Bids Are Invited For Projector 4K Laser 5500 Ansi Lumens 440 Watt , Wall Roof Mount Heavy Duty Projector Mounting Stand , Projection Screen Fixed Frame , High Definition Multimedia Interface Cable , Power Cable Copper 3 Core 1 And Half Mm , Amlifier 250 Watt , Speakers 150 Watt , Speaker Signal Wire , Presenter , Wifi Dongle For Projector , 5 Kva Online Ups With 30 Min Backup 16 X 42 Ah Batteries With Rack Cabling , Lecture Stand , Installation Of Projector Ups Speakers Wiring With Caping Casing Mcb Switch Board Control Panel Total Quantity : 446

BRR:9884634 Bids Are Invited For Qnp Bas Desktop With Arm Cortex Ote , D Link Dgs 16 Port Switch , Wi Fi Router , Hdmi Splitter 8 Port , Lc Patch Cord , Qnp Bas Desktop With Arm Cortex A55 , Presenter , Lan Extendor , 1.5Mm 90Mtr , 2.5Mm 90Mtr Total Quantity : 14

BRR:9914083 Supply, Installation/Upgradation, Testing And Commissioning Of Centralised Data Centre At Thavakkara Campus, Kannur University. , Network Firewall , Wan Switch , Core Switch , Distribution Switch , Tor Switch , Access Switch , Sfpmodules , Network Monitoring Software , Server , Storage , Virtualization Software , 42U Rack , 10Kva Ups With Battery , Fiber Optic Cable Singlemode 6 Core , Fiber Optic Cable Multimode 12 Core , 24 Port Liu (Server Room) , 24 Port Liu (Backbone) , Fiber Patch Panel Dc , Fiber Patch Panel Admin & Library , Fiber Patch Cord Single Mode 2.5Mtr , Cable Laying , Termination/Splicing, Fluke/Otdr/Olts Testing Including Digging And Other Services For Outdoor Cabling, 25 Year Performance Warranty Certificate , Isi Pvc/Gi Conduits Pipes , Automatic Modular Types Fire Fire Extinguisher , Split Ac With Timer Switch , Fire Retardant Door For The Data Center Room Entrance , Rodent Repellant , Room Biometric , Thermal Insulation , Room Light 40W Led Fitting (2X2 Feet) , Water Leak Detection System , Fire Retardant Paint For The Room , Raised Floor , False Ceiling

BRR:9910395 Bids Are Invited For Annual Maintenance Service -Data Center Assets - Amc Of Dell Vxrail Server And Dell Emc Switch; Dell Vxrail Server And Dell Emc Switch; Oem Authorised Service Provider

BRR:9910222 Bids Are Invited For Hardware System For Mine Warfare Data Centre Total Quantity : 1

BRR:9909780 Bids Are Invited For Request For Proposal For Renewal Of Software Assurance Agreement (Sa) For Microsoft Licenses Under Select Plus Plan For Three Years; Windows Remote Desktop Services CAL SLng LSA UCAL SQL Server Enterprise Core SLng LSA 2L Windows Server Datacenter Core SLng LSA 16L Windows Server CAL SLng LSA UCAL

BRR:9908878 Bids Are Invited For Procurement Of 02 Nos Servers For Main Data Center Nd(V) Total Quantity : 2

BRR:9903063 Tender for Appointment Of Service Provider And Consultant For Property Survey, Assessment And Digitization Of Property And Allied Taxes And Relevant Services For Entire Properties (Lands & Buildings) And Billing Within The Limits Of Kulgaon-Badlapur Municipal Council. (Third Call) , Property Tax Department.(Numbering(Geo-Sequencing),Door To Door Property Survey Of All Properties(Lands And Buildings), Data Collection For Evaluation And Assessment For Capital Value, Computerization Of All Collected Data And Link All Data To Software. Providing Services And Carrying Out All Detail Work Mentioned In Scope Of Work As Per Section 8.1 To 8.6 , Providing Software Executable File License & Services For 5 Year- Integrated Copyright Registered Mainframe And Advance Online Web Based Software For The Purpose Of Property Tax Assessment And Computerisation Of Municipal Counter Payment For Property Tax Collection And Online Property Tax Collection, Receipt, Daily Challan Generation, Arrears Posting, Data Enrty, Bills Of Taxes, Demand And Collection Regesters Etc Computerisation For Municipal Counter Payment Software Exporting,Importing The Required Data And Generating The Reports Of Transactions And Copyright Registerd Android Based Mobile Application For Door To Door Property Tax Collection In Hand Held Mobile Device With Bluetooth Receipt Printing Facility For Property Tax Dept.Training And Capacity Building Of Municpal Staff For One Year As Per Section Mentioned In The Tender Doc 8.7 , Providing Annual Operation & Maintenance And Supply For The Property Tax Dept As Providing Yearly Tax Collection Postings, Bills Of Taxes, Demand Registers And Collection Register Etc With Preprinted Multicolor Stationary And Maintaining The Database, Etc As Per Tender Document Scope Of Work For 5 Years As Per Section 8.8 , Providing Mobile Tablet Devices ,Bluetooth Printer, Hardware With Warranty And One Year On Site Servise Against Any Fault.Training And Capacity Building For Municipal Staff As Per Section 8.9 (If And As Ordered) , Maintainance Of The All Above Software License And The Database,Installation-Reinstallation As Required By Municipal Council,Upgradation Of Software And Database For Reconciliation Of The Next Financial Year For One Year As Per Section 8.10 , Providing License Based Data Services To Maintain And Manage Data Of Kulgaon Badlapur Municipal Council Related To Property Tax Department On AgencyS Data Center For Various Online Activities Related To Property Tax Software And Application As A Host Server And Database Server As Data Center With Appropriate Backup System At Selected Agency Office As Per Section Mentioned In The Tender Doc 8.11. (If And As Ordered) , Data Entry Of Property Data Collected During Survey In The Software Provided By Kbmc

BRR:9902932 Tender for Supply Installation Testing and Commissioning of 1250 Amps On-Load Lt Changeover Switch By Replacing Of The Exisisting 1250 Amps On-Load Lt Changeover Switch Installed At 33Kv/415V 2X1 Mva Electric Sub Station Data Centre

BRR:9893428 Supply, Installation And Commissioning Of Rack Servers, Network, Storage, Software Stack And Data Center Infrastructure Solution

BRR:9892981 Bids Are Invited For Annual Maintenance Service -Data Center Assets - Storage Backup Devices; Storage-System; Oem Authorised Service Provider

BRR:9886896 Bids Are Invited For Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Hp , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Dell , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Acer , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Lenovo , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer (Monochrome , Laser , Composite Cartridge ); Canon , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner; Epson , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups (Offline 600-650 Va); Intex , Annual Maintenance Service - Desktops, Laptops And Peripherals - All In One Pc; Hp , Annual Maintenance Service - Desktops, Laptops And Peripherals - All In One Pc; Lenovo , Annual Maintenance Service -Data Center Assets - Network Devices; Layer-2- Access-Switch; Neither Oem Nor Asp , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner; Hp , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner; Canon , Annual Maintenance Service - Desktops, Laptops And Peripherals - Printer (Monochrome , Laser , Composite Cartridge ); Hp , Annual Maintenance Service - Video Conferencing System - Video Conferencing Camera; Logitech; Neither Oem Nor Asp , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups (Offline 600-650 Va); Microtek , Annual Maintenance Service - Desktops, Laptops And Peripherals - Vc Mic; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Micro Cpu; American Megatrends , Annual Maintenance Service - Desktops, Laptops And Peripherals - Patch Panel; 24 Port , Annual Maintenance Service - Desktops, Laptops And Peripherals - Network Nodes; Network Nodes

BRR:9918405 Supply Of Supply Of Probe For Utm 9 Digital Ultrasonic Thicknessupply Of Probe For Utm 9 Digital Ultrasonic Thicknes,Supply Of Probe For Utm 9 Digital Ultrasonic Thickness Gauge Having Specification 1. Probe -5 Mhz And Diameter 10Mm ,2. Measurement Range - 0 To 600Mm, 3. Accuracy-0.5% And 4. Resolution- 0.01 Mm [ Warranty Period: 12 Months After The Date Of Delivery ] ] => Limited

BRR:9916885 Bids Are Invited For Firewall - Ngfw (Q2) ( Pac Only ) Total Quantity : 1

BRR:9916358 Bids Are Invited For Server For Cyber Security Total Quantity : 2

BRR:9915995 Bids Are Invited For Hardware Firewall Total Quantity : 3

BRR:9908454 Bids Are Invited For Firewall - Ngfw Total Quantity : 1

BRR:9907955 Bids Are Invited For Firewall - Ngfw , Usb A To C Fiber Optical Cable 20Mtr , 8 Gb Graphic Card , Hdmi Splitter 1 In To 6 With Power Adaptor Total Quantity : 6

BRR:9905802 Tender for Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete As Per Morth Spacification No. 803. Including Cost Of All Material And Labour, All Taxes And Labour Cess Etc But Excluding Cost Of Gst , Supply/Fixing Of Pavement Maker (Cat Eye) Type X-Astmd-4956-04 Avery Dennison/3-M (Usa Make) Consisting Of Asa Plastic Housing Fitted With Tightly Adherent Ploting Compound. The Housing Shall Contain Prismatic Two Glass Covered Prismatic Reflective Face To Reflect Incident Light I/C All Taxes.(Without Shank) Including All Material, Labour, T&P, Labour Cess Etc All Taxes Etc But Excluding Gst , Providing And Fixing Of Standard Metal Delineator As Per Irc 79-2019 Consisting Of Minimum Retro Reflective Unit Exposed Area Of 330 Square Cm In White Color, Full Cube Corner Micro Prismatic Non-Metallic Retro Reflective Sheeting On Each Side Conforming With Irc 67 2012 And Meeting The Coefficient Of Retro Reflection Values As Per Astm D 4956 Type Xi Table Specification. The Delineator Shall Be Painted With Powder Coat Of Minimum 40 Microns Thickness, On Top Of Which Retro Reflective Sheeting Shall Be Pasted On Both Sides. The Structure Shall Be Manufactured In Roll Forming Process And Shall Have Height Not Less Than 800 Mm Above The Ground, Width Not Less Than 100 Mm And Shall Extend Not More Than 300Mm Below The Ground While Being Installed. The Report Shall Be Submitted While Quoting The Tender. The Delineator Is Meant For Application On Gaps In Median, Traffic Islands, Dangerous Bends, Roundabouts, Narrow Bridges Etc. Or As Desired By Site Engineer. As Per Sor Ch-26 Item No.-1. Delinator Including All Material, Labour, T&P, Labour Cess Etc All Taxes Etc But Excluding Gst , Traffic Signs- Single Chevron (Normal) Providing And Fixing Of R

BRR:9905801 Tender for Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete As Per Morth Spacification No. 803. Including Cost Of All Material And Labour, All Taxes And Labour Cess Etc But Excluding Cost Of Gst , Supply/Fixing Of Pavement Maker (Cat Eye) Type X-Astmd-4956-04 Avery Dennison/3-M (Usa Make) Consisting Of Asa Plastic Housing Fitted With Tightly Adherent Ploting Compound. The Housing Shall Contain Prismatic Two Glass Covered Prismatic Reflective Face To Reflect Incident Light I/C All Taxes.(Without Shank) Including All Material, Labour, T&P, Labour Cess Etc All Taxes Etc But Excluding Gst , Providing And Fixing Of Standard Metal Delineator As Per Irc 79-2019 Consisting Of Minimum Retro Reflective Unit Exposed Area Of 330 Square Cm In White Color, Full Cube Corner Micro Prismatic Non-Metallic Retro Reflective Sheeting On Each Side Conforming With Irc 67 2012 And Meeting The Coefficient Of Retro Reflection Values As Per Astm D 4956 Type Xi Table Specification. The Delineator Shall Be Painted With Powder Coat Of Minimum 40 Microns Thickness, On Top Of Which Retro Reflective Sheeting Shall Be Pasted On Both Sides. The Structure Shall Be Manufactured In Roll Forming Process And Shall Have Height Not Less Than 800 Mm Above The Ground, Width Not Less Than 100 Mm And Shall Extend Not More Than 300Mm Below The Ground While Being Installed. The Report Shall Be Submitted While Quoting The Tender. The Delineator Is Meant For Application On Gaps In Median, Traffic Islands, Dangerous Bends, Roundabouts, Narrow Bridges Etc. Or As Desired By Site Engineer. As Per Sor Ch-26 Item No.-1. Delinator Including All Material, Labour, T&P, Labour Cess Etc All Taxes Etc But Excluding Gst , Traffic Signs- Single Chevron (Normal) Providing And Fixing Of R

BRR:9905800 Tender for Providing And Laying Of Hot Applied Thermoplastic Compound 2.5 Mm Thick Including Reflectorising Glass Beads @ 250 Gms Per Sqm Area, Thickness Of 2.5 Mm Is Exclusive Of Surface Applied Glass Beads As Per Irc:35 .The Finished Surface To Be Level, Uniform And Free From Streaks And Holes. Complete As Per Morth Spacification No. 803. Including Cost Of All Material And Labour, All Taxes And Labour Cess Etc But Excluding Cost Of Gst , Supply/Fixing Of Pavement Maker (Cat Eye) Type X-Astmd-4956-04 Avery Dennison/3-M (Usa Make) Consisting Of Asa Plastic Housing Fitted With Tightly Adherent Ploting Compound. The Housing Shall Contain Prismatic Two Glass Covered Prismatic Reflective Face To Reflect Incident Light I/C All Taxes.(Without Shank) Including All Material, Labour, T&P, Labour Cess Etc All Taxes Etc But Excluding Gst , Providing And Fixing Of Standard Metal Delineator As Per Irc 79-2019 Consisting Of Minimum Retro Reflective Unit Exposed Area Of 330 Square Cm In White Color, Full Cube Corner Micro Prismatic Non-Metallic Retro Reflective Sheeting On Each Side Conforming With Irc 67 2012 And Meeting The Coefficient Of Retro Reflection Values As Per Astm D 4956 Type Xi Table Specification. The Delineator Shall Be Painted With Powder Coat Of Minimum 40 Microns Thickness, On Top Of Which Retro Reflective Sheeting Shall Be Pasted On Both Sides. The Structure Shall Be Manufactured In Roll Forming Process And Shall Have Height Not Less Than 800 Mm Above The Ground, Width Not Less Than 100 Mm And Shall Extend Not More Than 300Mm Below The Ground While Being Installed. The Report Shall Be Submitted While Quoting The Tender. The Delineator Is Meant For Application On Gaps In Median, Traffic Islands, Dangerous Bends, Roundabouts, Narrow Bridges Etc. Or As Desired By Site Engineer. As Per Sor Ch-26 Item No.-1. Delinator Including All Material, Labour, T&P, Labour Cess Etc All Taxes Etc But Excluding Gst , Traffic Signs- Single Chevron (Normal) Providing And Fixing Of R

BRR:9900562 Bids Are Invited For Renewal Of Trend Micro Apex One End Point Security With Inbuilt Dlp+ End Point Sensor , End Point Protection Software / Appliances (V3) Total Quantity : 1000

BRR:9899637 Bids Are Invited For Cyber Security Audit - As Per Tender Document

BRR:9899500 Bids Are Invited For Hiring Of Agency For Iso Certification Service - Iso 27001 - Information Security Management System (Isms); Re- Certification Audit; As Per Scope Of Nit

BRR:9898627 Bids Are Invited For Utm Firewall Utm Firewall All In One Utm , Canon Cartridge 072 , Quickheal Total Security 10 User Pkt Of 01 , Computer Ups 1 Kva Make Zebronic , Quick Heal Total Security 5 User Pkt Of 01 Total Quantity : 22

BRR:9897644 Tender For Info. Tech. Services Online Aadhaar Compliance Audit And Security Audit Of The Msme Departments E-Seva Portal (Https.Msme.Up.Gov.In) And Its Sub-Domain (Https.Msme.Api.Up.Gov.In), Including The Sub-Aua, Sub-Kua, And Aua/Kua Related Portals, Under The Commissioner For Dir

BRR:9894288 Bids Are invited for Universal Testing Machine 1000Kn Capacity - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Shear Test Attachment 5,6,10,12,16, 20 - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Flexure Test Attachment For Utm - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Compression Testing Machine With Digital Readout Unit - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Digital Torsion Testing Machine 100 Nm - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Spring Testing Machine 2000 N - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Rockwell Cum Brinell Hardness Testing Machine - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Continuous Beam Deflection Setup - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Propped Cantilever Beam Apparatus - Specifications And Accessories Shall Meet The Bid Specification Document Criteria , Simply Supported Beam Setup - Specifications And Accessories Shall Meet The Bid Specification Document Criteria Total Quantity : 10

BRR:9893702 Bids Are invited for M365appsforopenfac Shrdsvr Alng Subsvl Olv E 1Mth Acdmc Ap For One Year , Wineduperdvc Alng Upgrdsapk Olv E 1Y Acdmc Ent For One Year , Winsvrstdcore Alng Licsapk Olv 2Lic E 1Y Acdmc Ap Corelic For One Year , Winsvrcal Alng Licsapk Olv E 1Y Acdmc Ent Usrcal For One Year - Winsvrcal Alng Licsapk Olv E 1Y Acdmc Ent Usrcal For One Year Note - Microsoft Open Value Subscription Education Solutions Current Agreement Number V6501021 , Acrobat Pro Dc For Education Named License For One Year , Creative Cloud For Teams All Apps Education Named License For One Year. - Creative Cloud For Teams All Apps Education Named License For One Year. Note - Adobe Account Number - A401d02a4199a60d5b8a. All Licenses -All Apps 7 Qty, Acrobat 22 Qty - Should Be Linked To This Account , Kaspersky Endpoint Security For Business - Select Or Kaspersky Next Edr Optimum - Kaspersky Endpoint Security For Business - Select Or Kaspersky Next Edr Optimum With On-Premises Central Management For One Year. Note - Kaspersky Endpoint Security For Business - Select License Current Id - 14B2-250414-075415-373-143 Total Quantity : 452

BRR:9893649 Bids Are Invited For Next Generation Firewall Total Quantity : 1

BRR:9893370 Tender For Rate Contract For Providing On Premises Security Audit Services From Cert In Empanelled Information Security Audit Agencies

BRR:9891018 Tender For Provision Of Security Infrastructure And Allied Work In The Aor Of Age B/R-I And Age E/M Under Ge 969 Ews (Job No Adm/16/Amwp/02/Med Regt/Fy 2025-26)

BRR:9886638 Bids Are Invited For Vulnerability And Penetration Testing - Network, Web Application, Mobile Applications, Iot Devices; Security Infrastructure Review, Data Communications And Network Control Review, Secure Configuration Review (Devices/Os), Application Security Audit (..

BRR:9886618 Bids Are Invited For Custom Bid For Services - Operation Of Mechanical Properties Evaluation Facilities & Testing Of Samples Using Utm As Per Spec No Hemrl Idea Gen Spec 2026 01

BRR:9886411 Bids Are invited for Firewall - Next Generation Firewall , Network Switch-1 - 26X 10 G Sfp Switch , Network Switch-2 - 4 X 10 G Sfp Switch , Microphone , Speaker - Speakers , Audio Dsp - Digital Signal Processor Total Quantity : 6

BRR:9884601 Bids Are Invited For Firewall Device And Computer Hardware Fingers Computer Mouse , Sophos Xgs 108 , Quick Heal Pro , Sophos Xgs 108 Software , Rj 45 Patch Cable Total Quantity : 6

BRR:9918019 Tender for Supply Of It Related Materials For Upcoming West Bengal Legislative Assembly Election, 2026 , Cctv 2.0-Megapixel Camera Dome , Cctv 2.0-Megapixel Camera Bullet , 8 Channel Hd Dvr , 16 Channel Hd Dvr , 32 Channel Hd Dvr , Cctv Smps 10 annual periodical maintenance , Cctv Smps 20 annual periodical maintenance , Surveillance Hdd 1Tb , Cctv Cable 90 Mtrs , Bnc Connector , Dc Connector , C1c Cctv Wi Fi Cam , Ezykam Cam 2Mp , Per Cctv Cam Installation Charges , Desktop Set (Minimum Ups-600Va, Intel -I3 Processor, 4Gb Ram, 1 Tb Hdd, 18.5 Monitor) , Laptop Standard Brand (Minimum 4 Gb Ram, Intel -I3 Processor, 1 Tb Hdd, 14 Monitor) , Usb Keyboard (Standard Brand) , Usb Mouse (Standard Brand) , Ups 600Va (Standard Brand) , Ups 1Kva (Standard Brand) , Wireless Keyboard (Standard Brand) , Wireless Mouse (Standard Brand) , Standalone Laser Printer (Standard Brand) , Laserjet Printer Cum Scanner (Standard Brand) , Multifunction Laser Printer With Duplex (Standard Brand) , Scanner (Minimum A4 Size Flat Bed) , 50 Led Tv Set (Standard Brand) , 52 Led Tv Set (Standard Brand) , 32 Led Tv Set (Standard Brand) , Hd Setup Box (Tata Sky/ Airtel/Dish Tv) , Hp 12A Toner Cartridge , Hp 78A Toner Cartridge , Hp 88A Toner Cartridge , Hp 79A Toner Cartridge , Hp 30A Hp Toner Cartridge , Hp 103A Toner Cartridge , Hp 110A Toner Cartridge , Hp Printer Head , Epson Ink (664/003) , Epson Ink (005/001) , Hp 15A Toner Cartridge , Compatible Toner (12A/88A/78A/925/110A/) , Hp Ink 319/525/520 , Pantum Pc-210Ek Toner Cartridge , Samsung Ml1710d3els Toner Cartridge , Hp Ink Gt52/53(Black & Color) , Canon 328 Toner Cartridge , Canon 332 Toner Cartridge , Canon 925 Toner Cartridge , Cannon Npg 28 Toner Cartridge , Cannon Npg-51 Toner Cartridge , Cannon Npg-20 Toner Cartridge , Cannon Npg-59 Toner Cartridge , Cannon Ink (790/71) , Konica 160 Toner Cartridge , Konica 164 Toner Cartridge , Xerox 5325 Toner Cartridge , Xerox 5335 Toner Cartridge , Xerox 5225 Toner Cartridge , Drum -Xerox Work Centre 5335 , Drum -Xerox Work Centre 2535 , Drum -Xerox Work Centre 5325 , Drum -Xerox Work Centre 5225 , Compatible Toner Cartridge , Pen Drive (32 Gb) Standard Brand , Pen Drive (64 Gb) Standard Brand , Pen Drive (128 Gb) Standard Brand , Otg Pen Drive 64 Gb Usb 3.0 Standard Brand , Blank Cd -(Sony/Moserbaer) , Blank Dvd -(Sony/Moserbaer) , External Hard Disk (1Tb) Standard Brand , External Hard Disk (2Tb) Standard Brand , Quick Heal Antivirus (Single User) , Quick Heal Antivirus (Multi User) , Wireless Microphone (Minimum Frequency Response:10,000 Hz ) , Wireless Microphone (Minimum Frequency Response:10,000 Hz ) On Hiring Per Day , Hd Usb Web Cam With Mic (Minimum 1.3 Mp Image Resolution) , Wired Headphone With Mic (Standard Brand) , Wireless Headphone With Mic (Standard Brand) , Dvd Player With Computer Compatibility (Standard Brand) , External Usb Dvd Writer (Standard Brand) , Mobile Power Bank 10000 Mah (Standard Brand) , Mobile Power Bank 20000 Mah (Standard Brand) , Mobile Power Adaptor (Power Charger) , Mobile Data Cable (Type B And Type C) , Usb Computer Speaker (Standard Brand) , Computer Power Cable Cord , Compatible Laptop Charging Cord , Compatible Laptop Battery , Memory Card 32Gb Micro , Memory Card 64Gb Micro , Memory Card Reader With Adapter Support , Cat-6 Lan Cable Rate Per Meter , Cat-6 Lan Cable 1 Box (Aprox. 305 Mtr) , Rj 45 Connector (1 Pic) , Patch Cable (Minimum 3Ft.) , Patch Cable (Minimum 5Ft.) , Lan Switch 4 Port (D-Link) , Lan Switch 8 Port (D-Link) , Lan Switch 16 Port (D-Link) , Unmanaged Gigabit Switch 24 , Managed Gigabit Switch 24 , Modular Plug Crimper , Wire Cutter Tool , Lan Tester , Hdmi Cable , Hdmi To Vga Adapter , Vga Cable (Male To Male) , Vga Cable (Male To Female) , Usb To Ethernet Connector , Usb Hub (4 Ports) , Usb 3.0 Extension Cable (Both Type M/F ) , Wireless Router (Minimum Speed 867Mbps/5 Ghz+ 300Mbps /2.4Ghz) , Usb Wireless Adapter (Minimum 2.4Ghz Frequency) , Technical Manpower On Hiring For Any Kind Of Technical Works For Up To 8 (Eight) Hrs. A Day , Technical Manpower On Hiring For Any Kind Of Technical Works For Up To 4 (Four) Hrs. A Day , Repairing Of Desktop/Laptop On Need Basis , Internet Connection (Using Cat6 Cable With R45 Connector) Rate Per Point , Spike Buster (Minimum 4 Socket With Cable Length 5 Mtr. ) , Standard Wireless Dongle Compatible With All Sims Card , Landline Phone Receiver (Standard Brand) , Rj45 Cat6 Lan Installation Of Network Keystone Jack, Gang Box And Face Plate(Single Set ) , Lan Cable Coupler Adapter Connector (Female To Female) , Splitter For Telephone And Broadband Modem Lan Adapter , Rj45 Splitter Adapter Connector 1 To 2 Female Ports , Portable Sound System With Microphone , Handheld Barcode Scanner (Minimum Speed 70 Scan Per Sec.) , Handheld Barcode Scanner (Minimum Speed 70 Scan Per Sec.) , Sd Card Class 10 64Gb Memory Card , Usb Sound Card , Hp Toner 335X , Hp Mfp E82540 , Mobile Phone (One Plus Nord Ce3 5G) , Memory Card-128 Gb , Airpode , Memory Card-256 Gb , Mouse Pad , New Sim Card With Recharge (Three Month) , Mobile Data Pack (Three Month) , High Speed Internet (100 Mbps) , Drum Cartridge (Canon Ir 2006N) , Hp Toner A3 Lje82500 , Hp Toner 158X , Epson Ink Bottle 673 , Surveillance Hdd 4Tb , Ssd 128Gb , Ram 16 Gb , Ssd 512Gb , Printer Cable , Intel Cpu I3 4Th Gen , Ram 4Gb , Telephone Line With New Connection , Tonner 228A , Hp 680 Black Original Ink Cartridge , Hp 680 Colour Original Ink Cartridge , Ssd 256 Gb , Surveillance Hdd 8 Tb , Toner Cartridge 337 , Colour Printer With Ink Tank

BRR:9912174 Tender For Purchase And Repair Of Computer Stationery In Nagar Palika Office.- 1 All In One Desktop (12Th Gen Core I5/ 8Gb/ 1Tb Hdd/256Gb Ssd/ Winl 1+Ms Office/Webeam/Wireless Keyboard & Mouse/Wlan/ Bt 4.0/ 27\ Fhd Display & Ir Camera/Lntel Hd Graphic Card) Complete In All Respect 2 Hp Laserjet Tank Mfp 1005W Printer 3 Canon Laser Shot Lbp2900/2900B Printer 4 Epson L32 10 Multi-Function Ink Color Printer 5 Hp Laserjet Tank Mfp 1005W Printer Toner Cartridge 6 Canon Laser Shot Lbp2900/2900B Printer Toner Cartridge 7 Epson L3210 Multi-Function Ink Tank Color Printer Ink Cartridge 8 Canon Laser Shot Lbp2900/2900B Printer Drum 9 Canon Laser Shot Lbp2900/2900B Printer Teflon 10 Toner Refilling Charges (Per Refill) 11 Ink Refilling Charges (Per Refill) 12 Antivirus 1 Year With Licence Key (Quick Heal/Norton360/Kaspersky) 13 Pen Drive 128 Gb (Hp/Sandisk/Samsung/Sony/ Kingston)

BRR:9910715 Supply Of Stationery Items -2 Xerox Paper A-4 size75gsm 21.0x29.7cm (500 sheets per Ream) red color 3 Xerox Paper A-375 gsm 29.7x42 cm(500 sheets per ream)Red color 4 Xerox Paper legal size75 gsm 21.5x34.5 cm(500 Sheets per ream)Red Color 5 Green Ledger Paper75 gsm 21.5x 34.5 cm(500 sheets per ream)Green Color 6 Carbon Blue Paper210 mm x330 mmColor blue/black 7 Register Delux/1Quire Full size33 cm x 20 cm 8 Register Delux/2 Quire Full size33 cm x 20 cm 9 Register Delux/3 Quire Full size33 cm x 20 cm 10 Register Delux/4 Quire Full size33 cm x 20 cm 11 Outward/ Inward Register Delux 4 quire full size33 cm x 20 cm 12 Note PadSize 8.5‖x 5.5‖50 Pages 13 Steno Note BookSize 8.5‖x 5.5‖50 Pages 14 Plastic Clip File A4 Size 30.5 cmX 24.8 Cm) 15 Plastic Clip File Full Size 35.5 cmX23 Cm 16 Plastic L FolderA4 Size(31.1 cmX 22 Cm) 17 Plastic L FolderFull Size(37 cmX24 Cm) 18 Plastic Strip File A4 Size(30.5x24.8) 19 Plastic Strip File FS Size(35.5x23Cm) 20 Bandi Pad/ Pad File4 mm36cmx24cm 21 Tag Bundle Red colour Steel Point Length 8 22 File White laceThick , Length 22 23 Tocha Plastic Length 6 24 Pin holder box6.8 CM x5.3 cm 25 Pin Cushion Net weight 30 grm 26 U Clip 35 mm Gross weight 68 grm 27 Binder Clip (1 Pkt 12 Pcs)25mm 28 Binder Clip (1 Pkt 12 Pcs)51mm 29 Correction Ink 7 ml white colour 30 Stapler HD.45 11 cm 31 Stapler K-10 9 cm 32 Stapler PinNo :- 10 -1M 33 Stapler PinNo :- 24 / 6 34 Working Cutter 18 mm 35 Call Bell Electric 36 Table Call Bell Manual 37 Punching Machine.280-5.5 cm 38 Punching MachineNo.600- 8 cm 39 Plastic Scale 6 Length 40 Plastic Scale 18 Length 41 Pencil CellAA Red (1015 R6 P) 42 Pencil Cell AAA Red (1012 R03) 43 GP High Voltage battery 12 Volt ( 23 A) 44 cloth for Basta Cotton- Color Red/white /yellow/ green 45 Sealing Wax400 GMS 46 Candle Big sizePckt of 6 pics of 9‖ length 47 Paper WeightGlass weight 48 Dak Pad FolioRexin with covering flap 15 x 10 thickness 1‖ 49 Kharda File Size 15‖X10.2‖ 50 Pad Ink50 ML 51 Ink pad Plastic 109 mmX67 mm 52 Ink Pad Extra large Plastic 168 mm x96 mm 53 Envelope Khaki 6 X 4 54 Envelope Khaki 6 x 14Per Nos 55 Envelope Khaki 6 X 16 56 Envelope Khaki 11 X 5 57 Envelope Khaki 16 X 12 58 Envelope Light Green (Cloth binding) 10 x 11 59 Envelope Light Green (Cloth binding) 10 x 14 60 Envelope Light Green (Cloth binding) 11 x 5 61 Envelope Light Green (Cloth binding) 12 X 16 62 Envelope Light Green (Cloth binding) 14 X 12 63 Envelope Light Green (Cloth binding) 18 X 14 64 Scissors9.5‖/ 235 mm 65 Calculator12 Digit 66 Pencil Sharpener ( Small 67 Rubber Eraser (Small) 68 Ball pen Blue/Black/Red 0.5 69 Ball pen Refill Blue/Black/Red 0.5 70 Refillable water proof ink system Pen Blue/Black/Red 0.5Color Pen 71 Refillable water proof ink system refil Blue/Black /Red 0.5Color refeil 72 CD/DVD Marker Pen Blue/Black /RedColor Pen 73 HighlighterProduct No. 887N( super fluorescent color) 74 Highlighter Multicolor 75 White Board Marker PenProduct no.1223Blue/Black/Red/Greencolors 76 Pencil Black1 Pkt. 10 pcs 77 Sketch Pen (1PKT = 10 PCS) Black Colors 78 Sketch Pen (1PKT = 10 PCS)Multi Colors 79 Glue Stick15 Gm 80 Gum Bottle300 M.L. 81 Sticky note pad(Flag) 3‖x1‖ (Three colurs) 82 Cello Tape White / Brown1‖ 30 MTRS 83 Cello Tape White / Brown2‖ 30 MTRS 84 Cello Tape White / Brown3‖ 30 MTRS 85 Notice BoardFibre 4 ft x 3 ft 86 Notice Board3ft x 2ft 87 Table Glass Complete Finishing with Polish12mm thick per sq. ft 88 Adustable Table Top24‖x18‖ 12 mm 89 Lock6 lever 90 Lock9 lever 91 NapkinTurkish White24‖ x 16‖ 92 NapkinTurkish White39‖ x 20‖ 93 Towel Full SizeTurkish White 94 Plastic Dustbin10‖ diameter x 9‖height 95 Plastic Tray ( Dongi ) Transparent15‖x11‖ 96 Pen drive 16 GB USB 3.0 97 Pen drive 32 GB USB 3.0 98 Mouse Pad 99 USB Port mouseUSB mouse 100 USB Port keyboard 101 Wireless Optical Mouse Bluetooth 102 Wireless Optical Keyboard Bluetooth 103 Spike Guard5 MTRS 6 Socket With USB 104 C.D.Blank700 MB -52 X writing speed 105 DVD- 4.7 GB / 8.5 GB - 16X writing speed 106 DVD Writer SATA CD and DVD writer 107 Key Board Stickers (Eng/ Marathi)Plastic quoted 108 Antivirus with installation 10 User Pack 109 USB Cable for printer3 Mtrs 110 RAM 2 GB DDR 3 111 RAM 4 GB DDR 2 112 RAM 4 GB DDR 3 113 RAM 4 GB DDR 4 114 2 GB RAM DDR-1 for laptop 115 2 GB RAM DDR-2 for laptop 116 2 GB RAM DDR-3 for laptop 117 1 TB HDD (Internal HDD SATA) 3.5‖5400/7500 RPM 118 1 T.B. External Hard disk driveUSB 3.0 119 2 T.B. External Hard disk driveUSB 3.0 120 4 T.B. External Hard disk driveUSB 3.0 121 Sata cableHDD and DVD writer 122 VGA Cable 5 mtr 123 HDMI Cable 5 Mtr 124 USB Cable Router 5 mtr 125 S.M.P.S.( 20pins) 126 S.M.P.S.( 24pins) 450 Watt 127 Motherboard MCT Battery Micro lithium BatteryCR 2032-3 Volt 128 Plastic Damper Clear damper 129 Electric Kettle 2.0 ltr. 130 Officer Glass Set 6 each 131 Steel Bottle 1 Ltr 132 Plastics Bottle 1 Ltr. Set (6 each) 133 Steel Spoon Per dozen (size medium) 134 Service Tray Big Size 12‖ x 18‖ Fiber 135 Service Tray Small Size 27 cm x 36 cm Fiber 136 Tea Cup & Saucer Bone china (6 each) Set Regular size 137 Steel Spoon Big Size Per dozen 138 Serving Breakfast Plate 15cm – 18 cm 139 Lunch or dessert plates 9 inches (23 cm) 140 Dinner plates: large 12 inches (30 cm) 141 Calculator Cell - 142 Duracell Alkaline AA Battery - 143 Duracell Alkaline AAA Battery - 144 Duracell GP Ultra alkaline Battery 23A 12VHigh Voltage 145 Power Cable CPU, Printer & LCD- 3 Meter 146 Use and Throw ball PenUniversal (Each Box 20 Pens)- 147 Fevi quick 5 ml 148 Stapler pin No. 23/17 149 White Board duster Medium size 150 Printer Cartridges Canon 925 Compatible and refielable 151 Printer Cartridges Canon 912 Compatible and refielable 152 Printer CartridgesHP 88 A Compatible and refielable 153 Printer Cartridges HP12A Compatible and refielable 154 Printer CartridgesHP 388 A Compatible and refielable 155 Printer CartridgesCanon 326 Compatible and refielable 156 Printer CartridgesSamsung MLTD111-S Compatible and refielable 157 Printer CartridgesKyocera TK 1114 Compatible and refielable 158 Printer CartridgesCanon 328 Compatible and refielable 159 Printer Cartridges 30A Compatible and refielable 160 Printer Cartridges 32A ( Drum Unit) Compatible 161 Printer Cartridges 110A Compatible and refielable 162 Printer Cartridges 137A Compatible and refielable 163 Monthly presenty register Full size 164 1 TB Laptop internal Hard disk SATA 5400 RPM/7200 RPM6.0 GB /Sec 165 1 TB Laptop internal Hard disk Solid State Drive 166 Box file Standard size A4 167 Box file Standard Full size A4 168 USB HUB , 4 Ports USB 2.0 169 Stick Pad Single Color Yellow Color Size 3 X 3 Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

BRR:9908163 Bids Are Invited For Computer Intel Core I5 Desktop 512 Ssd Min 8Gb Ram Preinstalled Latest Window 10 Operating System Monitor 19Point5 Min Wired Keyboard Mouse Make Hpordelloreqvl , Ups 1 Kva With 15 Min Battery Backup Make Cyber Power Or Eqvt , Computer Intel Core I3 Desktop 512 Ssd Min 8Gb Ram Preinstalled Latest Window 10 Operating System Monitor 19Point5 Min Wired Keyboard Mouse Make Hpordelloreqvl , 650 Va With 15 Min Battery Backup Make Cyber Power Or Eqvt , Quick Heal Total Shield License Anti Virus Software 1 User Total Quantity : 21

BRR:9907022 Supply Of antivirus , antivirus with installation including maintenance (10 user 03three) quick head total security 01 one year [ warranty period: 12 months after the date of delivery ] ]

BRR:9902828 Tender For Suppyl Of Artical Items - Raghunathpur Sd/Ss Hospital, Purulia , 150 Gsm Rim Paper For Birth Certificate , 680 Black Hp Cartridge (Orginal) , A3 Paper Per Rim , A4 Size Ecg Paper , A4 ¼ Page Printing (70 Gsm) , A4 ½ Page Printing (70 Gsm) With Numbering And Perforation , A4 Both Size Page Printing (70 Gsm) With Numbering And Perforation , A4 Paper Jk Max Copier 70 Gsm , A4 Single Size Page Printing (70 Gsm)With Numbering And Perforation , Abg Paper Rool , Alpin Box - Best Quality (T- Sape) , Quick Heal Total Security, 5 User, 1 Year, Anti Virus , Attendance Register (Best Quality 50 Pages) , Bagha Range 12 Enchi , Ball Pen (Red, Blue & Black) Agni , Battery For Digital Thermometer , Battery Medium 935 Nippo , Big Envelope (Cloth Coated) 18 X 12 , Binder Clip 25 Mm , Binding Admission Register (58 Gsm) , Binding Discharge Register (58 Gsm) , Binding Gpf Ledger (58 Gsm) , Binding Indoor In-Patient Central Register For Maternity Ward (58 Gsm) , Binding Indoor In-Patient Central Register For Medical & Surgical Wards (58 Gsm) , Binding Maternal Death Register (58 Gsm) , Binding O.T. Intimation Register (58 Gsm) , Binding Operation Register (58 Gsm) , Binding Referral Register (58 Gsm) , Binding Register (Line) No. (18/30/6) , Binding Sub Stock Register (58 Gsm) , Birth ,Death Details Paper(Pink And Yellow) , Blade Topaz Best Quality , Blotting Paper (100 Pcs) , Blue Contoiner 20 Ltr. , Broom Stick Best Quality , Brown Paper Roll Water Froof , Bucket 170 Ltr. With Lid , Calculator Orpat /Ot 512T , Calling Bell Battery(Electronics) , Candle Big Size (Per Pkd Of 6 Pcs) , Carbon Paper Royal Blue (Pkd Of 100 Sheets) , Cash Book 500 Pages , Cash Book (200 Page) , Cd Permanent Marker (Blue, Black, Red Best Quality) , Cello Tape Size 1 Inchi , Cello Tape Size 2 Inchi Brown Colour , Chargeable Torch 2 Cell (Jiban Sathi) , Charger-C Type , Chair Towel Band Best Quality , Chair Towel Best Quality , Clamp Board (Pitch Board) , Clamp Board (Pitch Board)-Fiber Board , Cleaning Bursh For Toilet (Best Quality) , Colin Liquid (Best Quality 500Ml) , Color Step Paper (100 Pc) , Cover File Plastic Coated (Best Quality) , Cover File With Printed , Crochet Thread White , Diet Register 4 Cloor Page/400 Pages Per Reg. , Digital Wall Clock-Ajanta , Digital Weight Machine Adult , D-Link Cat -6 Cable , Doctor-Pataint File With Printed , Door Mat(Fiber) , Dot Pen Reputed Company (Blue, Black Red & Green) , Dry Mop Big Size , Dustbin (Big Size) For Outdoor Use 60 Ltr. Foot Opareted , Electric Kettle 1 Ltr. , Envelope 10 X 4.5 (Pkd Of 50) , Envelope 6 X 12 (Pkd Of 50) , Epson -005 Ink Orginal , Epson Dmp Ribon Cessette Lq 310 , Epson L 3210 Colour Ink , Eraser , Executive Gel Pen Refill (Gree Best Quality) , Executive Stamp Pad Gripex (Big Size) , Executive Stamp Pad Gripex (Small Size) , Extension Cord With 15 Ft Wair , Flask 1 Tlr. Milton , Floor Cleaning Brush , Flower Broom (Best Quality) , Foot Operated West Bin Bucket (Yellow, Blue, Red & Black) 30 Lt. , Foot Operative Dust Bin Plastic (Big Size) Offices Use 15 Lts. , Fridge Thermometer , Gate Pass ( Size-A4 -1/8 Page Color ) , Glucometer Battery (Round) Nippo , Gum Boot 6 No. , Gum Boot 7 No. , Gum Boot 8 No. , Gum Paste (700 Ml) Bottle - Euro , Gum Stick - Small , Hand Dryer Automatic -1800W , Hand Wash Lifebuoy (500 Ml With Spray) , Harpic Liquid (1 Lt.) , Highlighter Pen (Luxor Yellow, Green, Blue & Red) , Hit Proof Gloves , Hit Spray Blck (Mosquito Killer) Big Sixe 500 Ml , Iron Chain 3Mm , Issue Register 16 No. , Jems Clips Good Qulaity , Kangara Hp-45 (Stupler) , Laryngoscope Battery , Lock & Key (Godrej 7 Lever) , Lock & Key (Houseking 60 Mm ) , Log Book (100 Page) , Laundry Bag , Magic Mop , Magnifying Glass , Master Tailor Scissor , Match Box , Measuring Tape , Medicine Envolope , Measuring Jug , Microhphone , Microphone Cord , Milk Feeding Spoon (Jhinuk/Godhol)Steel , Mini Pencil Battery , Motrin Liquidator 100Ml For Mosquito With Machine , Mouse Pad (Best Quality) , Napthalene Ball (Best Quality 200 Gm) , Net Bucket 30 Lt , New Born Baby Identity Belt , Note Sheet File (Reputed Company) , Notice Board , Paper Weight , Pen Drive Hp 64 Gb (Steel Body) , Pen Reputed Company (Red,Green) , Pen Stand Wooden , Pencil Battery (Aa Size) Nippo Iron Body , Pencill Battery (Aaa Size) Nippo Iron Body , Peon Book (Reputed Company 500 Pages) , Phool Jharu , Pin Cushion (Reputed Company) , Plastic Belcha - Big Size , Plastic Bin With Cover (Big Size 20 Ltr.) , Plastic Bowl (Medium Size) , Plastic Bucket 20 Ltr. , Plastic Envelop File , Plastic Jug 2 Ltr (Best Quality) , Plastic Mug , Plastic Transparent Box -10 Inchi/14 Inci , Plastic Transparent Box -5 Inchi/8 Inci , Printer Cartridge 12A (Hp Original) , Printer Cartridge 78A (Hp Original) , Printer Cartridge 88A (Hp Original) , Printer Cartridge Canon 925 (Original) , Printer Cartridge 12A (Compatible) , Printer Cartridge 78A (Compatible) , Printer Cartridge 88A (Compatible) , Printer Cartridge Canon 925 (Compatible) , Pumping Ball For Bloodbank , Puncture Proof Container (White & Blue) , Puncture Proof Container (White & Blue 5 Lt.) , Razor Blade , Rechargeable Battery (750 Mah Duracell) , Rechargeable Machine , Rechargeble Emergency Light (Philips) Big Size , Register Big (Reputed Company) Per No. 18 & 30 , Register Small (Reputed Company) 6 No , Resper Tebile ( Size 30X18 Inches) Premium Quality 8Mm With 1 Year Warranty) , Ring File Big Size (Reputed Company) , Room Freshener (300 Ml) , Router -D Link Double Entana , Rubber Stamp , Safty Razor (Plastic) , Sanitizer Bottal Holder(Steel) Bed Side , Scale Wooden (Big) , Scale Plastic Big , Scotch Brite , Sealing Wax / Gala Seal (Best Quality 6 Per Pkd) , Sharpener , Shoe Rack (Best Quality) , Soap (Lifebuoy Small) , Soda Powder (Reputed Company 1 Kg) , Spill Kit Box , Ssd 256 Gb , Stamp Pad (Faber Castell) , Stamp Pad Ink (Euro Best Quality) , Stapler (Kangaro) Big Size , Stapler (Kangaro) Medium Size , Stapler (Kangaro) Small Size , Stapler Pin (Kangaro) Big Size , Stapler Pin (Kangaro) Medium Size , Stapler Pin (Kangaro) Small Size , Stapler Jumbo Size , Static Duster , Steel Container For Cheatle Forcep (Best Quality) , Steel Hangar With Fitting , Sticky Note (Per Pkt In 3 Pc) , Sutli (Jute Best Quality) , Swab With Stick Big Size , Switch 8 Port , Table Glass 12Mm , Tag (Reputed Company) , Termite Killer Spray 500 Ml , Thread Ball , Thread For Stitching Dead Bodies , Three Bucket System , Tin Cutter - Best Quality , Tissue Paper Roll - Weather Tissues , Tonar Cartridge 925, 12A, 78A & 88A , Toner (Ricoh), Mp2014Hs , Torch Battery (2Cell) 950 - Nippo , Torch Two Cell - Jiban Sathi , Tourniquet Belt For Blood Bank , Tray Plastic - 10 Inchi X 16 Inchi , Sterile Urine Container 100 Ml , Utility Gloves , Vaccum Cleaner -1600 W , Wall Cleaning Brush , Wall Clock - Ajanta , Washing Powder (Wheell) 1 Kg , Water Botte Milton -1 Ltr. , White Board , White Board Duster (Fiber) , White Board Marker , White Paper F.C. Paper, 16Cm X 26Cm (Dista Paper) , Whitener , Wiper Big Size , Wooden Pencil , Zipper Bag 6X8 Inchi , Cotton Swab Stick , Steel Bwol Small Size With Lid , 003 Color Ink Epson Orginal(Three Pcs Set) , Haemoglobinometer (Mission) , Haemoglobinometer Strip (Mission) , Plactic Folder , Plastic Jacket , Feeding Katori For Babies Steel , Crockery Set (Cup And Saucers) , Crockery Set (Dinner) , Sanitizer Holder , Blood Culture Bottle (Paediatrics & Adult) , Five-S Activity Format , Emergency And Fire Exit Glow-Signs

BRR:9901899 Supply Of Supply Of Sintex Cylindrical Vertical Tanksupply Of Sintex Cylindrical Vertical Tank,Supply Of The Cylindrical Vertical Tank 1000 Liters Features 4P Protection With Active Silver Technolo Gy, Offering Superior Antimicrobial Benefits-Anti-Virus, Anti-Bacteria, Anti-Fungus, And Anti-Algae. Made From 100% Fo Od-Grade Virgin Plastic, It Ensures Safe And Clean Water Storage. The Tank Is Uv-Protected, Durable, And Compliant W Ith Rohs European Standards. Its Multi-Layer Design Provides Added Strength And Flexibility. Available In White, Blue , Yellow, And Green, It Comes With A 15-Year Warranty, Making It A Reliable Choice For Health-Conscious Water Storag E. Supply As Per Annexure Specifications [ Warranty Period: 24 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 La Cs ] ] , Supply Of The Cylindrical Vertical Tank 1000 Liters Features 4P Protection With Active Silver Technolo Gy, Offering Superior Antimicrobial Benefits-Anti-Virus, Anti-Bacteria, Anti-Fungus, And Anti-Algae. Made From 100% Fo Od-Grade Virgin Plastic, It Ensures Safe And Clean Water Storage. The Tank Is Uv-Protected, Durable, And Compliant W Ith Rohs European Standards. Its Multi-Layer Design Provides Added Strength And Flexibility. Available In White, Blue , Yellow, And Green, It Comes With A 15-Year Warranty, Making It A Reliable Choice For Health-Conscious Water Storag E. Supply As Per Annexure Specifications [ Warranty Period: 24 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 La Cs ] ] => Limited

BRR:9893073 Bids Are Invited For Procurement Of It Software Adobe Photoshop 2026 , Adobe Acrobat Pro Dc , Quick Heal Antivirus 3 Years Single Pack , Coral Draw Graphics Suite 2022 , Ms Office Professional Plus 2024 Oem Pack , Filmora Perpetual Total Quantity : 20

BRR:9886227 Bids Are invited for Anti Virus 1 - Kapersky Or K7 , Anti Virus 2 - Kapersky Or K7 , Anti Virus 3 - Kapersky Or K7 , Anti Virus 4 - Kapersky Or K7 , Anti Virus 5 - Kapersky Or K7 Total Quantity : 10

BRR:9885095 Bids Are Invited For Stationery Demand Kaspersky Antivirus , Steel Blade Cutter , Sharp Bp-20M22 Toner , 12A Cartridge , 88A Cartridge Total Quantity : 104

BRR:9884821 Procurement Of Endpoint Protection Software Anti-Virus To Desktop Systems Of Bhoomi, Ajsk & Mojini Projects - Antivirus

BRR:9921536 Tender For Material Supply, Spares & Special Tools - RGC - Construction of 33/110kV Step Up GIS at Pushpakandam-- 1 Design, Engineering, Manufacture, Testing at manufacturers works, Delivery at site including all materials, accessories such as OLTC,RTCC, with Transformer Oil and 10% extra Oil, spares,Gaskets, OTI,WTI,MOLG indicators with transducers and Tools as per specification , loading and unloading, transportation, handling, proper storage at siteThree Phase Two Winding Transformer33/110kV, 60MVA Capacity with optical sensors and Remote Data Transfer facility with optical communication media, and all other accessories complete, with SAS Integration Scope , all required valves and flanges for NIFPS shall be provided for transformer at the time of transformer design itself,inclusive of necessary connectors/clamps suitable for Aluminium tube/ACSR conductor(All other items as per technical specification / Layout drawings) - intended for Renewable Energy Evacuation 2 Design, Manufacture, Testing at Manufacturers works, Transportation and Delivery of 110 kV, 3 Phase Encapsulated Double Busbar Indoor Gas Insulated Switchgearequipmentand other accessories at Substation siteand as per respective Technical Specifications, Single Line Diagram, General Arrangement Drawings, IS/IEC standards, approval of KSEBLand relevant special conditions applicable. The quote for each bay shall include necessary interconnecting GI bus ducts within the building. The supply include all accessories of GIS bay, earthing materials for forming the earth grid inside the GIS hallas per standards of GIS earthing (Cu/Al), including RF Earthing, Cable tray, control cable from GIS to LCC, LCC panel, ladder etc. complete. 3 110 kV GIS Feeder Bay with PT(40kA/ 1250A min) 4 110kV GIS Double Bus bar arragement with PT(40kA/ 2500A min) 5 110kV GIS Bus Coupler Bay(40kA/2500A min) 6 110kV GIS Transformer Bay (40kA/1250A min) 7 Polymer housedSurge Arrester suitable for 110kV, 10kA, Class 3 withclamps, terminal connectors suitable for connection of any type of conductor or Al/cu pipe bus as per requirement, leakage current measuring meter with counter, flexible copper cable of required size and all accessories complete 8 110kV composite solid core station post insulator , clamps, connectors etc suitablefor Al/ Cu Pipe Bus /Conductors. 9 Neutral CT (NCT) 36kV 3150Afor 60 MVA 110/33kV, Power Transformer with structure including clamps,terminal connectors and 36kV composite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete-Ratio 1200-600/1-1 Amps(33 kV side) 10 Neutral CT (NCT) 36kV 3150A for 60 MVA 110/33kV, Power Transformer with structure including clamps,terminal connectors and 36kV composite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete-Ratio 400-200/1-1 Amps(110 kV side) 11 UG power cable- 110kV, Single core, 630sqmm, Aluminium conductor,XLPE insulated,Aluminium Corrugated sheathedandHDPE Outer jacket under ground cable having rated short circuit capacity for both conductor and armourwith necessary Non - Magnetic , Metalic Trefoil/flat formation clamps atminimum 3 metre interval, steel/nylon cable ties wherever necessary 12 Outdoor termination kit suitable for 110kV, 630 Sqmm Single core Copper/ Aluminium UG cable for yard structure mountinginclusive of all accessories like earthing cable, suitable Non - Magnetic, Metalic clamp for fixing cable to support structure etc at 1m interval complete. 13 Indoor Plug in Type GIS termination kit for 110kV 630 Sqmm XLPE Single coreCopper/ Aluminium UG cable,inclusive of all accessories like earthing cable, suitable Non - Magnetic , Metalic clamp for fixing cable to support structure etc at 1m interval complete. 14 Supply of 4IPS Schedule 40 Al. Tube including requiredJointing Sleeves, Expansion joints, etc. withnecessary fixing clamp and all accessories complete for 110kV,33kV equipment to equipment connection 15 Three Phase Link Box 6.6kV withoutSVL for 110kV cable with copper bonding cable(minimum cross-section 300sq.mm) including all accessories 16 Three Phase Link Box 6.6kV withSVL for 110kV cable with copper bonding cable(minimum cross-section 300sq.mm) including all accessories 17 33kV Indoor composite VCBPanels having bus capacity 31.5 kA for 3sec, 3150A at STC continuous rating, 4 nos feeder bays having capacity not less than 1250A ,2 nos transformer feeder bays (for 33/110kV transformer) having capacity not less than 2000A ,1 nos transformer feeder bay ( for 33/11 kV5MVA Transformer ) having capacity not less than 1250A and1 nos bus coupler with bussection panel not less than 3150A, two bus PT panel at both side of the bus .Every feeder/incomer/ bus coupler shall have CT, E/S, synchro check, SEM Energy Meter, Ammeter, Voltmeter, Control and Protectionincluding earthing as per standards(Cu), cable tray, control cables etc completeand as per SLDand specifications. 33/110 kV 60 MVA Transformer feeder shall have provision for termination of cable size 3 runs per phase of 630 sqmm Aluminium cable. Each incomer panel (transformer) shall be provided with additional special protection class CT cores for differential protection scheme M1 and M2 at 110kV transformer C&R panel. All the feeders shall be remote controlled from SCMS and from the local console of the numerical relays with Bay Control Unit and protection unit including supply of the same. The supply includes one number VCBfor each ratings as spare (2000A, 1250A) and two numbers of service trolley for VCB , E/S, PT and spares (as per attached list clause 6.6 & 6.7 of volume 2, Chapter 27). 18 Polymer housedSurge Arrester suitable for 33kV, 10kA, Class-3 with clamps, terminal connectors etc. suitable for connection ofany type of conductor or Al /Cu pipe bus as per requirement, including leakage current measuring meter with counter, flexible copper cable of required size and all accessories complete (33kV Feeder/ Transformer) 19 33kV 800A Triple Pole Line Isolator with Structure, clamps, terminal connectors etc. suitable for connection of any type of conductor or Al/Cu pipe bus as per requirement 20 33kV Pin insulator with pin 21 33kV composite solid core station post insulator with high level structure with clamp & connectors suitable for Al pipe/conductor. 22 UG power cable- 33kV 1Cx630sqmm Aluminium 33kV, XLPE Aluminium armoured having rated short circuit current capacity for both conductor and armour and HDPE outer jacket for 33/110kV 60MVA transformer incomer with necessary Non-magnetic, metallic, Trefoil/flat formation clamps at minimum 3 metre interval and steel/nylon cable tie wherever necessary 23 Outdoor Heat shrinkable termination kit suitable for 33kV, 630 Sqmm XLPE Single core Aluminium UG cablewith necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesincluding cost of bimetallic strip etc. and suitable Non-magnetic, metallic clamps for fixing cable to support structure at 1m interval complete. 24 Indoor Heat shrinkable termination kit suitable for 33kV, 630 Sqmm XLPE Single core AluminiumUG cablewith necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesincluding cost of bimetallic strip etc. and suitable Non-magnetic, metallic clamps for fixing cable to support structure at 1m interval complete. 25 Design, Engineering, manufacturing, testing at Manufactures worksite, supply, delivery,loading and unloading, transportation, handling, proper storage at site,supervisionof erection, testing and commissioning of 33/11kV, 5MVA three phase two windingtransformer as per technical speciationsincluding all materials, accessories such as Off Load Tap Changer, Transformer Oil and 10% extra Oil, spare Gaskets, OTI,WTI,MOLG indicators with transducers as per specification and Remote Data Transfer facility with optical communication media, with SAS Integration Scope , inclusive of necessary connectors/clamps suitable for Aluminium tube/ACSR conductor(All other items as per technical specification / Layout drawings) - intended for Renewable Energy Evacuation 26 Neutral CT (NCT) for 5 MVA 33/11kV Power Transformer with structure including clamps,terminal connectors andcomposite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete -Ratio 200/1-1 Amps (33kV side) 27 Neutral CT (NCT) for 5 MVA 33/11kV Power Transformer with structure including clamps,terminal connectors andcomposite solid core post insulator with structure for support of GI earthing conductor/strip with terminal connector and all other accessories complete -Ratio 300/1-1 Amps (11kV side) 28 Alumimium UG Cable- 33kV, 3Cx300 sq.mm XLPE insulated, Galvanised steel strips armoured power cable for feeders / Aux Tfr with necessarymetallic, non magnetic clamps atminimum 3 metre interval, steel/nylon cable tie wherever necessary 29 Outdoor Termination kit Heat Shrinkable Type for 3Cx300sqmm Aluminium 33kV, XLPE Galvanised steel strips armoured power cable with necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesetc. and suitable clamps for fixing cable to support structure at 1m interval complete 30 Indoor Termination kit Heat Shrinkable Type for 3Cx300sqmm Aluminium 33kV, XLPEGalvanised steel strips armoured power cable with necessary clamps, connectors suitable for connection ofany type of conductor or Al /Cu pipe buswith all accessoriesetc. and suitable clamps for fixing cable to support structure at 1m interval complete 31 Distribution Transformer 11kV/433V, 250 kVA, Star rated (BEE Latest notification as on date of tender)with 11kV & 433V outdoor cable entry box, suitableDistribution Box with LT cable (Trfr to LT box) with 500Amps Fuse and MCCB including all accessories like Busbar, Metering Cabinets etcand its fixing -mounting arrangement on plinth 32 11kV Outdoor type RMU withcombination of 2( two) numbers ofSF6 insulated/arc quenching motorized Load Break Switches and one Vacuum/SF6 breaker suitable for 11KV/433V Auxillary Transformer/ Outgoing feederas per the KSEBL approved make with CT, VT, Control and Protection Relays - Overcurrent/REF etc. and Metering, Indications complete (SCADA compatable) as per the technical specification 33 11kV Outdoor type RMU withcombination of 2( two) numbers ofSF6 insulated/arc quenching motorized Load Break Switches as per the KSEBL approved make with CT, VT, Control and Protection Relays - Overcurrent/REF etc. and Metering, Indications complete (SCADA compatable) as per the technical specification 34 Supply of 11kV indoor VCB 5 panel set with combinations of Incomer feeder panel with PT (1 number), Outgoing feeder panel (3 number) and transfomer panel (1 number) with bay control and protection unit (BCPU) for integration with upstream Substation Automation System (SAS) through HSR/PRP topology (IEC 61850 edt 2 compliant) with protection philosophy specified in technical specification along with supply of accessories necessary for operational spares and special tools (as per attached list clause 37.6 & 38 of volume 2, Chapter 30). Bus Bar ratings are 2000A. Circuit breaker shall be E2 M2 C2 class as per IEC 62271-200. Feeder, transformer and incomer panel shall have capacitive voltage indicators (CVI) and only incomer panel BPCU will have PT inputs. Feeder,transfomrer and incomer panels shall house one each multi-function meter (MFM) and DLMS compatible energy meters. Each Incoming and outgoing feeders shall be equipped with split core type CBCT for Sensitive Earth Fault Protection 35 Supply of Polymeric type LA suitable for 11kV 36 3Cx300sqmm 11kV Aluminium XLPE insulated under ground armoured cable, with necessaryclamps for fixing with support structure at 3 m interval 37 3Cx300sqmm11kV Aluminium XLPE Under ground cable Termination Kit Outdoor Heat Shrinkable 38 3Cx300mm2 11kV Aluminium XLPE Under ground cable Termination Kit Indoor Heat Shrinkable 39 Supply of Hot dip Galvanised LatticeStructurefor 33kV,11kV& 110 kV Switch Yard, Columns/Beams/Pre fabricated Cable Supports in Trenches/lightning mast structure/ lighting mast structure/ equipment structures unless otherwise not specified else where in the BOQ etcinclusive of N&Betc(as per respective Technical Specifications, standards and relevant special conditions). 40 EOT Crane of suitable capacity (minimum 5T safe working load) with single hook and double girder arrangement for GIS Hall. Contractor shall submit the capacity calculation of the crane incorporating 25% additional load considering erection and maintenance of largest GIS component / assembly. 41 DG set 125 kVA silent type, Outdoor plinth mounted withAMF panel, Auto Load Change over module and panels, Battery and its charger, Diesel Tank etc with SAS integration facilities including all accessories complete 42 Battery Set - 110 V, 400Ah , Lead Acid plante Battery SetC10 Duty cycle (Rating is tentative and final sizing as per the load calculation shall be under bidder scope) & Installationwith Battery Racks made with acid proof material ,two number of indsutrial type flame proof exhaust fan and all necessary arrangements including tool kit like hydro meter, chemical gloves, multimeter etc. 43 48V, 200 AH VRLA Battery Set with all associated accessories for reliable communication & data acquistion project complete as per specifications 44 SCADA compatible 110V Dual mode (FC+ BC) Battery Charger, with independent Float (FC)and Boost charging (BC) (2 number rectifier unit) min-FC-80A, BC-80A, suitable for 110V Battery bank as per design and shall charge Battery set as per technical requirement during float /boost mode without interruption to load. The charger shall have two independent incomer supply.(Battery charger shall meet the full DC load during boost condition and the Bidder shall propose the final sizing of the battery charger during detailed engineering for approval)(Both set shall be of different make ) 45 Battery Charger - 48 V Dual mode (FC+BC) (Float - 30A/Boost - 60A) - SCADA compatible, SMPS based,Suitable to VRLA Battery set and shall be able to charge Battery set as per requirement during float /boost mode as well as it shall supply to load as per rated voltage of load components inclusive of necessary power, communication and control cables with all accessories complete -Compact type 46 SCADA compatible DCDB-110 V with minimum 20 + 20 Outgoing feeders duplex type (Floor Mountable) with changeover panel having interlock facility with 20% spare feeder breakers for station control and protection systems as per the station requirement, facility shall be there to charge any battery set with any of the battery chargerwith interlock. Ratings shall be as per the battery sizing calculation. 47 DCDB 48 V with change over facility and min 20 Nos. of Distribution Outlets( 2 Nos.- 10A and 18 Nos. 6A)-DUPLEX Type-SCADA/SAS Compatible-Wall mountable 48 SCADA compatible LT 3 phase 50Hz Panel Boardwith Insulated Aluminium Bus Bar, 2 nos incomers (Auxillary Transformer / DG Set), automatic interlock/load change over facilty, two sets of outgoing,panel with LED indications, panel meters,ACB /MCCB(incomers), MCCB (feeders), Earth Bus bar etc., for LT Power Distribution to Control room/equipments including all accessories complete as perspecifications having minimum 20% spare feeders.Remote operation shall be possible for incomers and DG set.(Panel sizing and rating to be proposed by the bidder during detailed engineering for approval). 49 SCADA compatible LT MLDB/LDB/Street light control DB with Lighting Transformer, Surge Protection Devices, MCCB, MCB, RCCB, ELCB and all accessories complete as per technical specifications for Control Room and Yard lighting including all sub distribution boards, and SCADA compatible ACDB/Sub ACDB for Air Conditioners & AHU with soft starting feature etc. including MCCB, MCB, RCCB, ELCB. (The DB sizing and rating shall be proposed by the bidder, with 20% spare capacity, during detailed engineering for KSEBL approval) 50 SCADA compatible LT Emegency Lighting Distribution Board (ELDB) with 63A Incomer and minimum 12Nos 10A Outgoing Feeders and DC Emegency Lighting Distribution Board (DC ELDB) and related accessories including MCCB/MCB,RCCB/ ELCB as perstandard specifications for Emergency lighting in the substation / Switchyard, charges including all sub distribution boards 51 LT A.C Three Phase Self mounted Indoor Power Kiosk IP 42 with 1 incomer MCCB 63A including indicating lamps,single phase and three phaseindustrial type16A sockets etc. at GIS hall 52 LT A.C Three Phase Self mounted Outdoor Power Kiosk (IP 56) with 1 incomer MCCB 250A, 2 Outgoing MCCB 160A & 100A including indicating lamps,3 phase and singlephase industrial type 16A sockets etc. complete for Transformer oil filteration unit, welding purpose etc. 53 Supply of Protection Panels/Equipments, Substation Automation System and materials as per technical specifications, IS/IEC Standards applicable 54 Control and Protection panel for Transformer with Differential Protection,REF (Transformer management relay) for HV and LV [M1 and M2 relay shall be of different make / platform and each shall have-87, 67/67N, 64R-Low Impedance, Transformer Mechanical Protection- Bucholz, OLTC Bucholz, OLTCPanel Control & signal interfacing with RTCC panel, OTI, WTI, PRD1 &2 through high impedance tripping relays, MOLG Alarms etc.,] 33/110kV 60MVA, with BCU , IEC 61850 Edition 2compatible and provision for interface to SCADA system. Energy meters as per technical specifications and suitable for GIS switchgear modules 55 Busbar Protection panel for8 bays (110kV Bus) as per specifications -with zone segregated tripping, LBB, end zone protection, local HMI for displaying differential current, SLD, Isolator Position etc., with output tripping relays (drawout type) and provision for interface to SCADA/SAS system 56 Control and Protection panels (main 1 and 2- 87L,21,67/67N,50N,59,PSB, 79A/R,49,81 O/U) for 110kV Feeders with BCU , IEC 61850 Edition 2compatible and provision for interface to SCADA systemas per tech specifications and suitable for GIS switchgear modules (M1 and M2 relay shall be of different make / platform and the combination shall exactly suit with the remote end M1 and M2 relays). Over and above the normal Tri-Vector Meter, the contractor should supply SEM Meters as per SRLDC/PGCIL Standards, additionally. 57 Control and Protection panel for 110kV Bus Coupler with BCU and additional Common BCU for Auxiliary control System and Monitoring including the panel as per standard and requirement of 110kV GIS 58 Design, Manufacture and Supply of Complete SAS system for 110kV GIS , as per detailed technical specification , SAS system Architecture andSLD , Reduntant Servers, Reduntant Gateway, Reduntant Routers with Hardware Firewalls,2 Nos Operator Work Station with HMI -Desktop (one operating work station with extended HMI at Nedumkandam (10Km away)) , 2 Nos. Engineering Work Station(Lap top and Desk top) , one metering PC with DCU for SAMAST metering and Remote Station Controls, necessary Panels and Furnitures etc completewith all necessary accessories, cables,converters, GPS based Time Syncronising Unit IEC compatible to cater data to and from all bays and transformer, SCADA compatible panels,interfacing /intergating line differential relay in CR panel, SAS gateway server panel etc to FODP/Communication equipment in communication room as per specification, including supply of all necessary converters for interfacing with the communication equipment , unarmoured OF cable , 40mm PLBHDPE pipe duct , all interconnecting cables , Patch chords devices etc. complete. The scope include integrating 33kV and 11 kV systems.SAS Architecture should be suitable for plug and play integration of future bays. [Including mandatory Spares as specified in volume 2 - Technical Specfications, Chapter 11, Annexure C] 59 Design, Manufacture and Supply of materials / item for Power Cable, Control Cables and instrumentation cable, Supply of various sizes of 1.1 kV FRLS-0H PVC armoured copper cable for control , Aluminum/ Copper LT power cable as per approved cable schedule (to be prepared by contractor and got approved), and provision of all types of cables from Power and Auxilliary Transformer and other equipments/switchgears, for the substation (Aluminium cables of size 185 mm2 and above shall be XLPE type) includingties , tags etc. supply of suitable size PVC pipe and accessoriesfor drawing exposed cables as per the technical specifications, IS/IEC Standards applicable. 60 12x4mm2 Control CableCopper 61 4x6mm2 Control CableCopper 62 4x4mm2 Control Cable Copper 63 2x4mm2 Control Cable Copper 64 19x2.5mm2 Control CableCopper 65 12x2.5mm2 Control Cable Copper 66 7x2.5mm2 Control Cable Copper 67 4x2.5mm2 Control Cable Copper 68 3x2.5mm2 Control Cable Copper 69 2x2.5mm2 Control Cable Copper 70 2x1.5mm2 Control Cable Copper 71 4x0.5mm2 instrumentation Cable Copper 72 4x10mm2 PVC InsulatedLT copper cables 73 2x10mm2 PVC Insulated LT copper cables 74 2x1.5 sq.mm or higher size PVC Insulated shielded copper cables for Transformer OTI & WTI wiring 75 20/25 mm dia FRLS PVC Rigid/Flexible Conduit including all clamps, clips etc. for Fire Alarm Panel and sensor wiring purpose 76 3 1/2C x300 Sqmm 1.1kV LTXLPE insulated armoured Aluminium cable 77 3 1/2C x 240 Sqmm 1.1kV LT XLPE insulated armoured Aluminium cable 78 3 1/2C x 120 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 79 3 1/2C x 90 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 80 3 1/2C x 70 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 81 3 1/2C x 50 Sqmm 1.1kV LT XLPE insulated armoured Aluminium cable 82 3 1/2C x 35 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 83 3 1/2C x 25 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 84 4C x 16 Sqmm1.1kV LT XLPE insulated armoured Aluminium cable 85 1x 95 sqmm DC cable (stranded and flexible) NFPA category FRLSLH Copper Cable for battery. 86 1x 70 mm2 DC cable (stranded and flexible) NFPA category FRLSLH Copper Cable for battery. 87 1x35 mm2 DC cable (stranded and flexible) NFPA category FRLSLH Copper Cable for battery. 88 Supplying aluminium cable tags with punching number and alphabets up to 7 digits or higher as per requirement for 220/33/11kV power cables including cost of all materials as per the technical and standard specifications 89 Hot dip galvanized ladder type cable tray with joint plate and N&B size300x100x2 with all accessories complete 90 Hot dip galvanized ladder type cable tray with joint plate and N&B size 450x100x2and with all accessories complete 91 Hot dip galvanized ladder type cable tray with joint plate and N&B size600x100x2 and with all accessories complete 92 Design, Manufacturere, Testing at Manufacturs works, transporation and Delivery of the Conductor/ Earthing Materials and associated materials for Gas Insulated Substation as per technical Specifications and IS/IEC Standards applicable 93 Aluminium Bus bar 120*10mm 94 ACSR Wolf Conductor 95 110 kV 90kN Silicon Composite Longrod Insulator 96 110 kV 70kN Silicon Composite Longrod Insulator 97 110 kV Single Tension H/W and Accessories suitable for Single Wolf 98 110 kV Single Suspension H/W and Accessories suitable for Single Wolf 99 wedge – connector suitale for wolf/Kundah 100 wedge with paddlesuitale for wolf/Kundah 101 Earth Wire 7/3.15 mm Galvanised Steel wire with required hardwares accessories and earthbond 102 Tension Clamp and Tail Clamp for 7/3.15 mm Earth Wire 103 32/40mm MS rod for earthing 104 GI strip all sizes as per requirement for earthing 105 Clamp and saddle for GI strip/wire 106 Test link for lightning protection 107 1.5m GI lightning spike with fixing clamps 108 Design and supply ofVentilation system for GIS hall(positive pressure type)with prefilters and fine filters of washable type for 100% capacity of GIS hall, with air displacement of 5 times the volume of GIS hall per hour (one operating + one standby , consisting of two units each having capacity 5 times air changes per hourof GIS hall workingcyclically for 50% of time)with soft starting feature,comprising of GI ducts( with provision for nitrile rubber insulation if taken externally), fire dampers, exhaust dampers, grills, noise reduction system etc. complete.The system shall be monitored via SCADA including necessaryelectrical panels. 109 Design, Manufacturere, Testing at Manufacturs works, transporation and Delivery of the Fire and Safety Equipments and materials for 33/110kV Gas Insulated Substation as per technical Specifications and IS/IEC Standards applicable- Portable and wheel/ trolley mounted fire extinguishers for Control room 110kV GIS Hall, 110kV Switchyard Relay panel room of GIS Hall,Transformers and other Strategic locations including its installation at site 110 Dry chemical powder of 9kg capacity 111 Dry chemical powder of 25kg capacity 112 Dry chemical powder of 50kg capacity 113 CO2 gas type of capacity 6.5kg 114 CO2 gas type of capacity 22.5kg 115 Mechanical foam type capacity 9LT 116 Mechanical foam type capacity 50LT - 117 Fire Stand with 4 buckets(Including Concreting as per drawings) 118 SCADA compatible - Main Fire Alarm Control Panel (Zone of protection as per approved scheme) complete with Charger, Rectifier, Visual Display, battery back up complete as per the station requirement 119 Photo Electric type Smoke detector with base compatable for Fire Alarm Panel 120 Photo Electric type Heat detector with base compatable for Fire Alarm Panel 121 Supply of Beam Detector and Reflector for GIS with base compatable for Fire Alarm Panel 122 Audio Alarm with Hooters cum Speakers compatable for Fire Alarm Panel 123 Manual Call point of Break Glass Type with hammer and chain 124 Insulating Mat (Size 2000x1000x2mm) class A including its fixing at site as per Technical Specification and IS 125 Safety Chart for First Aid, Electric Shock & Fire and Fire Fighting Equipments including its fixing accessories complete 126 Lighting and General / Miscellaneous Items 127 Optical Fibre Cable (12F Single Mode and 12F Multimode) , SM and MM Patchcords, all necessary connectors complete, as per site requirement for extended HMI, bus bar protection other than SASas per site requirement and technical specification 128 Ground Enhancement Material (GEM) ( Per Bag -11.33 Kgs ) - Conforms IEC 62561-7 Standard. The GEM shall have Resistivity of less than 20 Ohm-cm and Environmental friendly 129 Visual Monitoring System (VMS) with surveilliancecamera as per technical specification and layout drawing (Including local PC monitoring set up having sufficient storage capacity, remote end PC monitoring if necessary set up shall be in the scope of supply) including necessary power and communicationcables, interconnecting hardwares, PVC pipes and all other accessoriesetc complete as per the technical specifications (minimum requirement : Fixed Camera : min 8 Nos, Pan Tilt Zoom Camera : min 2 Nos, Fixed Variable Focus: min 4 Nosand storage >8TB) 130 Design of Air Conditioning system and Supply of5 Star rated (as per latest BEE notification)2TR or higher capacity split type inverter Air Conditioners, with stabilizer, Power Isolator etc.for Control & Relay panel room, Communication room, SCADA room, Bay Control Room (each room has got minimum one unit of redundancy, cyclically operated with Room temperature indicator) as per detailed engineering and approval. Temperature indicators shall be integrated to SCADA 131 SPARES for GIS - 220/110kV 132 Tripping & closing coil(Each Breaker type Module) 133 Motor for disconnector of each type of equipment 134 Motor for CB spring charging (each Breaker Type) 135 SF6 Pressure Guage for Circuit Breaker 136 SF6 Pressure Guage for other compartments 137 SF6 Pressure Relief Device 138 Auxillary contact assembly for Circuit Breaker 139 Auxillary contact assembly for Disconnector/Isolator-each type 140 SF6 gas 141 Moisture absorbant catridge 142 NRV gas filling valve for equipment 143 Indication lamps and lamps for semaphores & annunciators- one for each type & colour 144 Annunciator full set each type with one set of relay card 145 Special tools for Installation and Maintenance -220/110kV 146 Gas Leakage detector - DILO make 147 Special spanners for General maintenance for supplied GIS 148 SF6 gas bottle locking , measuring and filling assembly with whole hose 149 Measuring Instruments 150 Clamp on meter- capable to measure mA range .• High sensitivity, miniature AC/DC clamp meter.Range: 200mA/2/20A AC, 2/20A DCMin. resolution for AC: 0.1mAMin. Resolution for DC: 1mAJaw size: 7.5mm all required accessories from following make and model Fluke,MEGGER,KYORITSU 151 Phase Sequence meter with Standard accessories -Fluke,MEGGER,KYORITSU 152 Digital Multimeter 279FC TRMS Thermal or advancedFluke,MEGGER Model 153 Analog Multimeter, with Standard accessories - Fluke,MEGGER,KYORITSU 154 SF6 gas Analyser including DEW point,purtity & Hygrometer etc.

BRR:9921366 Tender for Supply Of 11Kv, 630Amps, 50Hz, 3Way (2Lbs+1Cb) Non-Extensible Two (2) Motor Operated Lbs With Manual Operated Earth Switch, Outdoor, Sf6, Ring Main Unit. , 3 Way Rmu, 11Kv, 630A, 21 Ka 3Sec, Sf6 Outdoor Rmu - 2Lbs + 1Cb,Non-Extensible Two (2) Motor Operated Load Break Switches (Lbss) With Manual Operated Earthing Switches In Sf6 And One (1) Vacuum Circuit Breaker With Electrical Closing And Tripping Along With Disconnector And Earthing Switches Scada Compatible And Base Channel. Battery Charger Along With Batteries Required For Electrical Operations Of Rmu Is In The Scope Of The Bidder. Each Module Shall Consist Of Vpis, Fpi In Lbs Module (N-1) But Not Less Than 1 NoS Per Rmu. Suitable Arrangement For Mounting Frtu, Modem Or Ethernet Switch/Liu Along With Battery, Battery Charger Shall Be Provided In Rmu.

BRR:9921338 Tender For Carrying out various repair works at Vastam Sports Complex S.No.90, Dhanori Pune 411015=-ITEM NO: 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No: 21.02) (PMC Bhavan) Unique No (702) Rate List Year (2023-2024) ITEM NO: 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (SSR Item No: 21.06) (PMC Bhavan) Unique No (706) Rate List Year (2023-2024) ITEM NO:3 Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 24.16) (PMC Bhavan) Unique No (816) Rate List Year (2023-2024) ITEM NO: 4 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 25.13) (PMC Bhavan) Unique No (818) Rate List Year (2023-2024) ITEM NO: 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 25.52) (PMC Bhavan) Unique No (828) Rate List Year (2023-2024) ITEM NO: 6 Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (SSR Item No: 25.33) (PMC Bhavan) Unique No (823) Rate List Year (2023-2024) ITEM NO: 7 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (SSR Item No: 26.33) (PMC Bhavan) Unique No (852) Rate List Year (2023-2024) ITEM NO: 8 Providing fly ash brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR Item No: 27.13) (PMC Bhavan) Unique No (881) Rate List Year (2023-2024) ITEM NO: 9 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. (SSR Item No: 32.11) (PMC Bhavan) Unique No (944) Rate List Year (2023-2024) ITEM NO: 10 Providing and applying priming coat on concrete/ masonary/Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. (SSR Item No: 35.21) (PMC Bhavan) Unique No (1071) Rate List Year (2023-2024) ITEM NO: 11 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete (SSR Item No: 46.19) (PMC Bhavan) Unique No (1526) Rate List Year (2023-2024) ITEM NO: 12 Glass mosaic tile: Providing and fixing glass mosaic tile (Fixing in gray cement and filling joint with white cement) PALADIO/PINO/ELIMENT (SSR Item No: 60.01-A) (PMC Bhavan) Unique No (16453) Rate List Year (2024-2025) ITEM NO: 13 Providing and erecting Y type barbed wire fencing with seven rows of wire with 2.45 mm dia G.I. pipe (Rezan / concenti Deleted ire 0.75 mm dia) with hot dip and G.I. coated hooks as per drawing supported on M.S. angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and fastening with wire, painting M.S. angles with one coat of red lead primer and two coat of oil paint etc. complete. (SSR Item No: 40.5) (PMC Bhavan) Unique No (15776) Rate List Year (2024-2025) ITEM NO: 14 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon)coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre) with COLORBOND (R) steel quality super durable polyester paint (SSR Item No: 38.34) (PMC Bhavan) Unique No (1155) Rate List Year (2023-2024) ITEM NO: 15 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting. erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No: 23.01) (PMC Bhavan) Unique No (797) Rate List Year (2023-2024) ITEM NO: 16 Providing & fixing plain glass of 8 mm thickness for window and wherever necessary as per dept, instructions, it includes providing & using glezing clips, Putty of Kumbh Company etc. complete. (SSR Item No: 69.04) (PMC Bhavan) Unique No (3127) Rate List Year (2023-2024) ITEM NO: 17 Black Kadappa (one side polish) (Machine cut) 25 mm thick (SSR Item No: 49.M-11) (PMC Bhavan) Unique No (17403) Rate List Year (2024-2025)

BRR:9920747 Tender for Tender For Configuration Of Siemens Relay To Compatibility With Scada System At 33/11 Kv, 2X1.6 Mva S/Stn. Bhutti Under Electrical Sub- Division No-Ii Hpsebl, Kullu.

BRR:9910081 Bids Are Invited For Calibration Services - Calibration Of Furnace With Scada System; Calibration Of Furnace With Scada System; Nabl Labs; As Per Buyer Requirement

BRR:9910069 Bids Are invited for Wave And Surface Current Measurement System With Accessories As Per The Specification Incuding Mounting Frame And Cables - Wave And Surface , Data Acquisition And Processing System With Necessary Software As Per The Specification - Data Acquisition , Peripherals System Rack Remote Display Isolation Transformer And Online Ups Ethernet Switch - Rack Remote Display , Installation And Commissioning Of The Wave And Surface Current Measurement System Payment Will Be Done Based On The Actual Number Of Days Utilized On Pro Rata Basis - Installation And Commissioning , Training For Data Acquisition Collection And Processing And Validation - Training Total Quantity : 15

BRR:9907775 Tender for Request For Proposal (Rfp) For Configuration, & Deployment Of Scada-Based Remote Monitoring Systems With Lorawan/Mqtt Including Integration And Go Live Services For Installed And New Remote Monitoring Systems With Upgradation And Integration Of Existing State Level Portal & National Level Portal Of Pm-Kusum Scheme Component-B , Along With Establishment Of Unified Monitoring And Information Management System For Customer Grievances Handling, Performance Oversight And Operational Reporting With Five (5) Years O&M Contract For Jharkhand Renewable Energy Development Agency (Jreda), Ranchi

BRR:9907557 Tender For Supply And Work Of Upgradation Of Existing Scada System And Integration Of New Bay In Updated Scada System Of 400Kv/220Kv Switchyard At Katpp, Jhalawar - Industrial grade PC with Windows 11 Operating system.Server: 02 nos.OWS: 03 nos.OWS cum Engg PC: 01 no.Gateway: 02 nos.( • 4URack mount Chassis with Visual Alarm Notification, Lockable front door prevents unauthorized access• LGA115 19thGeneration Intel®Core™i7ATXDD R4,SATA3.0,USB3.1&6COMs.• Chip set H310• 400W ATX Power supply• CPUIntelCorei7-9700(3.0GHz,8Core,8Threads,12MBCache)9th generation with industrial CPU cooler• 32GB DDR4 RAM 1600/2400 Max Support(32GB)• 1TB SATAHDD Enterprises• Support s Dual display DVI,VGA• 4USB(2xUSB3.1Gen1,2xUSB2.0)• 2XRJ45Lanport10/100/1000MBPS• 2xRS-232,4forG2version(3xRS-232,boxheader;1xRS- 232/422/485 with auto-flow control, box-header)• PCI5(32-bit/33MHz), 1xPCIex4(Gen2) , 1xPCIex16(Gen3)• DVDR/W• Windows11Pro64bit) 3 SCADA software loaded in PC (All Softwares required to complete upgradation work) 4 Laptop for remote access ( 15 Inches i7 processor, 8GB Window 11) 5 27” Monitor( LED, HP/ DELL/Equivalent make) 6 Printer A4 size( HP/cannon/Equivalent make. Wireless Print copy ,SCAN , Hi-Speed USB 2.0, Ethernet, Up to 21 PPM, Black& White) 7 Cards for Upgradation of existing BCU (if required)400KV bay: 12 nos.220KV Bay: 05 nos.Auxliary BCU: 01 no.( Compatible for existing BCU, model micom C264, make Areva) 8 Cards for Upgradation of existing busbar relays (if required)400KV: CU 04 nos.220KV: CU 02nos. & PU 10nos.( Compatible for existing Busbar CU, model P741 and P746, make Areva/ Schinder) 9 GPS Master Clock along with Antenna and 30-meter Coaxial Antenna Cable( • Masibus/Equivalent make 19”Rackmount• GPS Master Clock along with Antenna and30-meter Co axial Antenna Cable.•Model: MC-1-U-1-1-0-U1-2 Having IRIG-B (Modulated) – 1 port• IRIG-BTTL– 1port• RS232–1portRS485–1portNTP–1portPPM/ PPH–1port Aux. Supply: 90-370V DC, 85-260VAC, 47-55Hz,) 10 WorksDesign, engineering, writing, testing, configuration, Integration work or any other work related to upgradation of existing SCADA system 11 Hardware Replacement & Integration work of existing BCU 12 Integration work of new 220KV bay 13 Installation, testing, Commissioning work of GPS system including time synchronizing of existing equipments and SCADA system 14 Hardware Replacement & Integration work of existing Busbar scheme

BRR:9906764 Tender For Tender For Online Monitoring System Of E.T.P For Data Transfer To C.P.C.B & H.S.P.C.B , Description Con::Lytepro Terminal 1. S::Can Terminal 2. Display Up To 6 Parameters 3. Setup And Calibration Of All S::Can Monitoring Systems 4. Interface To Scada Via 4-20 Ma Analog Outputs 5. Digital In- And Outputs, Analog Inputs 6. Control Of Cleaning Valves 7. Logbook Available Specifications: Display: Lcd Functional Display:2 X Led Operation Via: Keypad Onboard Memory: 512 Mb Interface To Scada:4-20 Ma, Analog Inputs:1 X 0/4-20 Ma Outputs For Automatic Cleaning:2 Digital Inputs:2 Relay Outputs:2 X 6A (600 Vac) Power Supply:85-264 Vac (47-63Hz Power Consumption (Max.): 30 W System Error Relay:1 X 6A (600 Vac) Dimensions (Wxhxd):235.6 X 213 X 117.3 Mm Housing Material:Pc Weight (Min.):1300 G Operating Temp: -20... 50°C Storage Temperature: -20 ... 50 °C Protection Class:Ip 65 Conformity-Emc:En 61326-1 Conformity-Safety En61010-1 Integration Of:S::Can G::Series, I::Scan, S::Can Sensors, S::Can Ise Probes Interface Connection To S::Can Spectrometrics Probes: 1Xmil(Ip67),Rs485 Interfac

BRR:9905684 Tender for Annual Maintenance Contract (Amc) For Siemens Make Scada System Of 400Kv Switchyard Of Csctpp, Chhabra

BRR:9903133 Tender For Fanning At Mauje Valivali Chowk In Kulgaon Badlapur Municipal Council Area.-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. Lift upto 1.5 m.) By Mechanical Means Excavation for foundation in Hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc.complete. Providing and laying Cast in situ/Ready Mixcement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. columns as per detailed designs and drawing or as directed including Steel centering formwork, cover blocks laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork,cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Providing and laying in position flooring of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand) Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete. of aluminium composite panel cladding in approved shape made out of 4 mm thick ACP sheet material consisting of 3mm thick FR grade mineral core following NBC part IV Fire and life safety (having 2 hours fireresistance in accordance to ASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminium sheets (each 0.5 mm thick of AA 5005/AA3105 grade) The aluminium composite panel cladding sheet shall be coil coated with kynar 500 basedPVDF/Lumiflon based fluropolymer resin (having 70:30 ratio of PVDF and acrylic) coating of approved colour and sg=hade on top face and polymer (service) coating of bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats,weathersilicon sealent,backer rods etc .overall weight of the ACP shall not be less than 7.5 Kilogram/ One Square Metre) Engraving the letters of sizes specified below ingolden or any other approved colour on granite stoneetc. complete as directed by Engineer In Charge. Letters upto 30mm in any language as directed. Letters above 30mm and upto 50mm in any language as directed. Border line upto 12mm thk. TOTAL AMOUNT WORK DESCRIPTION Supplying and erecting circular flexible/rigid PVC pipe duct of size 40mm dia, 4mm thickness with required couplers, reducers, T-joints, Yjoints elbows and necessary supports etc. with sealing with provided control/air flow regulating valves/dampers, filters at position complete. Supplying and erecting unbreakable concealed type modular switch box with double mounting plate for 12 module duly erected flush to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. Supplying, erecting & marking SPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB Supplying and erecting single pole and neutral distribution board (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB Supplying and erecting shockproof 3 pin plug socket 6A with porcelain base / flush type erected on filled polypropylene board or polished thick varnished double wooden block / folded or screwed board with top of either wooden / 3 mm thick hylam sheet/ 4mm thick plywood pasted with 1.5 mm thick laminate with S M screws and duly connected. Supplying and erecting modular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. Point wiring for light/fan/bell in 20 mm FRLS grade HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire with flush type switch and required accessories as per specification No: WG-PW/SW Supplying and erecting mains with 2x1.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW Supplying and erecting mains with 2x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW LED Spot Light Supplying and erecting LED Strip light 5m Length Max. 95 W IP20 class having minimum lumens output of 1600 Lumens/m, min. efficacy of 90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%, p.f.>0.95, operating range of 230-270V, Life class of 30,000 Hrs. at L70B50 including driver with 1 year warranty.. Supplying and erecting white footlight with 4 modules concealed modular box and LED lights with cover complete erected on wall /flush to wall with necessary chiselling in wall and finishing with cement and mortar / POP as per required and duly connected. Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP Supplying and erecting GI strip of high purity required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint with joints required. As per specification no EAEP. Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. Supplying and erecting static energy meter with 240V 50 Hz. AC supply 10 to 60 A, ISI mark, accuracy class 1.0 with backlit LCD display, measuring and display kWh, kVAh, V,I,PF, frequency, kW, kVA, six months history of Energy & MD in kW & kVA ) with transparent hinge type box complete erected on polished teak wood board duly wired with required size of weather proof PVC wires duly tested by electric supply company.

BRR:9903125 Tender For Construction Of Machinery Shed 151 Sq.M- 1 BUILDING STRUCTURE 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation andnecessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 3 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming,atering etc. complete. 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal foroundation and bedding including bailing out water, Steel centering, formwork,laying/pumping, compacting,ughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 5 Providing and laying in situ /Ready Mix cement concrete M-20 oftrap / granite /quartzite/ gneiss metal for R.C.C. work in foundationslike raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structuralteel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 9 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 10 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints onnexposed faces, raking out joints on exposed faces and watering etc. Complete. 11 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 12 Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 14 Providing and fixing mild steel grill work for windows, ventilators etc. 20 kg/sqm as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. 15 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) 16 Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete. 17 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 18 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 19 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. 20 Providing structural steel work of rectangular hollow steel section for steel trusses, other similar trussed items like purlin and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted/bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting ofpproved quality and shade complete. Spec. No. : As directed by Engineer-in-charge. 21 Providing and fixing G.I. Precoated Metacolour Sheet of 0.50 MM Thick and 930 profile for roof including roof bolt and necessary fixing arrangement (prior approval of sample and brand by Ex.Engineer is necessary befor use) 22 Providing & Fixing TURBO VENTILATOR … etc. 23 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / essages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 24 ROYALTY CHARGES 25 Royalty for Sand 26 Royalty for murum and Other material 27 QUALITY CONTROL & LAB TESTING 28 M10 CONCRETE: Concrete cube Test 29 M20 CONCRETE: Concrete cube compressive strength (M15 & M30 both) 30 BRICKS :Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks),Efflorescence (Set of 5 Bricks) 31 TMT STEEL :Yield Stress, Ultimate Tensile Stress, Elongation, Weight per running meter. 32 Sand :- i) Fineness Modulus, II) Silt content 33 Murum :- ii) Atterberg Limit 34 iii) Density of compacted layer 35 Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess 36 Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct

BRR:9903039 Tender for Item No.1: Excavation For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area & Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting Etc. Complete. (Lift Upto 1.5 M.) By Mechanical Means , Item No.2: Providing And Laying Cast In Situ/Ready Mix Cement Concrete In M-10 Of Trap/ Granite/ Quartzite/ Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Formwork, Laying/Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade) , Item No.3: Providing And Laying In Situ/Ready Mix Cement Concrete M-20 Of Trap / Granite /Quartzite/ Gneiss Metal For Reinforced Cement Concrete Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Reinforced Cement Concrete Columns And Steel Stanchions Etc. Including Bailing Out Water, Formwork, Laying/Pumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided (Excluding Reinforcement And Structural Steel) Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) , Item No.4:Providing And Laying Cast In Situ/Ready Mix Cement Concrete M-20 Of Trap / Granite /Quartzite/ Gneiss Metal For Reinforced Cement Concrete Columns As Per Detailed Designs And Drawing Or As Directed Including Centering, Formwork, Cover Blocks, Laying/Pumping, Compaction Finishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete,(Excluding Reinforcement And Structural Steel).With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) , Item No.5:Providing And Laying Cast In Situ/Ready Mix Cement Concrete M-20 Of Trap / Granite /Quartzite/ Gneiss Metal For Reinforced Cement Concrete Beams And Lintels As Per Detailed Designs And Drawings Or As Directed Including Steel Centering, Formwork, Cover Blocks, Laying/Pumping, Compactionand Roughening The Surface If Special Finish Is To Be Provided And Curing Etc. Complete. (Excluding Reinforcement And Structural Steel). With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) , Item No.6:Providing And Laying Cast In Situ/Ready Mix Cement Concrete M-20 Of Trap/ Granite/ Quartzite/ Gneiss Metal For Reinforced Cement Concrete Chajja As Per Detailed Design And Drawings Including Centering, Formwork, Cover Blocks Compacting , Curing , Finishing And Roughening The Surface If Special Finish Is To Be Provided And Curing Complete. (Excluding Reinforcement And Structural Steel).With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) , Item No.7: Providing And Laying Cast In Situ/Ready Mix Cement Concrete M-20 Of Trap/ Granite / Quartzite/ Gneiss Metal For Reinforced Cement Concrete Slabs And Landings As Per Detailed Designs And Drawings Including Centering, Formwork, Cover Blocks, Laying/Pumping, Compactionfinishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete,(Excluding Reinforcement And Structural Steel).With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate ( Crushed Sand Vsi Grade ) , Item No.8Providing And Laying Cast In Situ/Ready Mix Cement Concrete In M-20 Of Trap/ Granite/ Quartzite/ Gneiss Metal For Reinforced Cement Concrete Pardi Of Required Thickness Including Centering, Formwork, Cover Blocks, Laying/Pumping, Compacting , Curing , Finishing And Rougheningthem If Special Finish Is To Be Provided And Curing Complete.(Excluding Reinforcement And Structural Steel).With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate (Crushed Sand Vsi Grade F) , Item No.9: Providing And Fixing In Position Tmt - Fe - 500 Bar Reinforcement Of Various Diameters For Reinforced Cement Concrete Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches Etc. As Per Detailed Designs, Drawings And Schedules. Including Cutting, Bending, Hooking The Bars, Binding With Wires Or Tack Welding And Supporting As Required Complete. , Item No.10: Providing Second Class Burnt Brick Masonry With Conventional/ I.S. Type Bricks In Cement Mortar 1:6 In Foundations And Plinth Of Inner Walls/ In Plinth External Walls Including Bailing Out Water Manually , Striking Joints On Unexposed Faces, Raking Out Joints On Exposed Faces And Watering Etc. Complete. , Item No.11: Filling In Plinth And Floors With Contractors Material/Brought From Outside And Approved By Engineer Incharge In Layers Of 15Cm. To 20Cm. Including Watering And Compaction Etc. Complete. , Item No.12: Providing Second Class Burnt Brick Masonry With Conventional/ I.S. Type Bricks In Cement Mortar 1:6 In Superstructure Including Striking Joints, Raking Out Joints, Watering And Scaffolding Etc. Complete , Item No.13:Providing And Fixing Mild Steel Grill Work For Windows, Ventilators Etc. 20 Kg/Sqm As Per Drawing Including Fixtures, Necessary Welding & Painting With One Coats Of Anticorrosive Paint & Two Coats Of Oil Painting Complete. , Item No.14:Providing And Fixing In Position. (As Per I.S.1868 / 1982) Aluminium Sliding Window Of Two Tracks With Rectangular Pipe Having Overall Dimension 63.50 X 38.10 X 1.02 Mm At Weight 0.547 Kg/Rmt. And Window Frame Bottom Track Section 61.85 X 31.75 X 1.20 Mm At Weight 0.695 Kg/Rmt. Top And Side Track Section 61.85 X 31.75 X 1.30 Mm At Weight 0.659 Kg/Rmt. The Shutter Should Be Of Bearing Bottom 40 X 18 X 1.25 Mm At Weight 0.417 Kg/Rmt. Inter Locking Section 40 X 18 X 1.10 Mm At Weight 0.469 Kg/Rmt. And Handle Section 40 X 18 X 1.25 Mm At Weight 0.417 Kg/Rmt. And Top Section 40 X 18 X 1.25 Mm At Weight 0.417 Kg/Rmt. As Per Detailed Drawings And As Directed By Engineer In Charge With All Necessary Aluminium Sections Fixtures And Fastenings Such As Roller Bearing In Nylon Casting And Self Locking Catch Fitted In Vertical Section Of Shutter Including 5 Mm Thick Plain Glass With All Required Screws And Nuts Etc, Complete. With Powder Coating With Box , Item No.15: Providing And Fixing Steel Frame Door Of Angle 50 X 50 X 6 Mm With Mild Steel Bars 16 Mm Dia. Horizontally At 10Mm C/C For Ventilator Portion Including Iron Hold Fast Boxes For Fixing Shutters Including Welding, Finishing, Painting Etc. Complete. , Item No.16:Providing And Fixing Steel Window Of Various Sizes As Per Detailed Drawing Without Hot Dip Zinc Coating, Without Ventilators, Including Fabricating / Glazing With Plain / Obscured Glass Panels Of Approved Type And Quality, Iron Oxidised Fixtures And Fastenings, Oil Painting Two Coats Complete. , Item No.17: Providing Internal Cement Plaster 12Mm Thick In Single Coat In Cement Mortar 1:4 Without Neeru Finish To Concrete Or Brick Surfaces, In All Positions Including Scaffolding And Curing Etc. Complete. , Item No.18: Providing Internal Cement Plaster 12Mm Thick In Single Coat In Cement Mortar 1:5 Without Neeru Finish To Concrete Or Brick Surfaces, In All Positions Including Scaffolding And Curing Etc. Complete. , Item No.19:Providing And Applying Two Coats Of Wall Care Putty On Plastered Surface And Ceiling And Walls To Prepare Surface Even And Smooth Of Approved Make, Etc Complete. , Item No.20:Providing And Laying Vitrified Mirror / Glossy Finish Tiles Decorative Type Having Size 590 Mm To 605 Mm X 590 Mm To 605 Mm Of 8 To 10 Mm Thickness And Confirming To Is. 15622-2006 ( Group Bla) Of Approved Make, Shade And Pattern For Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortar Including Neat Cement Float, Filling Joints, Curing And Clearing Etc. Complete. , Item No.21:Providing And Applying Priming Coat On Concrete/ Masonary/ Asbestos Cement Plastered Surfaces Including Scaffolding If Necessary, Preparing The Surface By Thoroughly Cleaning Oil, Grease, Dirt And Other Foreign Matter And Sand Papering As Required Etc. Complete. , Item No.22: Providing And Laying Telephone Black / Amba White / Cadburybrown / Ruby Red / Ocean Brown Granite Stone Of 18 To 20 Mm Thick For Door Frame/ Dado/ Window Boxing Etc. On C.M. 1:6 Including Filling Joints With Polymer Base Filler Nosing The Sharp Edges Wherever Necessary, Curing, Etc. Complete. , Item No.23 : Royalty Charges For Sand , Royalty For Other Minirals , Laboratory Testing Charges Compressive Strength Of C.C.Cube (Set Of 3 Cubes) , Add Ii- 18 % For Gst , Add 0.5% For Labour Insurance

BRR:9900844 Tender For Construction Of Processing Shed 144.37 Sqm-2 Excavation for foundotion in earth, soil of all types, sand, grovel and soft murum, including removing the excavated material up to a distance of 50m. beyond the building oreo and stocking and spreading as directed, dewotering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting efc. complete. (Lift upto 1.J m.) By Mechanical Means. (INo21-02, PgNo 153) (STATE SSR ) Item Spec: (Bd-A.1 Page No. 259) 3 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and struning etc. complete. (Lift upto 1.50 m) By Mechanical Mean. (INo 21-06, PgNo 153) (STATE SSR ) Item Spec: (Bd.A.2 Page No. 259) 4 Providing and laying Cost in situ/Ready Mix cement concrete in M-10 of trap/ granitel quartzitel gneiss metal for foundation and bedding Including boiling out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) (I. No 24-01, PgNo 226) ( STATE SSR ) Item Spec: (Bd. E.Page No. 287) 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, gri||age and footings of R.C.C. columns and steel stonchions efc. including bailing out water, Steel centering, formwork , cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement ond structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixerj etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc. 6 Providlng and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailled designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed efc) 7 Providing and laying Cost in situ/Ready Mix cement concrete M-20 of trap / Granite / quartzite / gneiss metal for RCC beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surfoce if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structurol steel). with fully automatic micro professor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plont (Pan mixer) etc. complete. With fine aggregate (Natural Sond / Crushed sond VSI Grade finely woshed etc) (I NO. 25-50, PgNo 234) (STATE SSR ) ltem Spec: (Bd.F.6 Page No. 300 and B.7, Poge NO. 38) 8 Providing and costing in situ cement concrete M-20 of trap/Granite / quartzite/ gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand. Bd.F.8 Page No.302 and B.7,Poge No.38 9 Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen etc. complete. SSR 2019-20 Item No. 33.30. 10 Providing and fixing In position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting,bending, hooking the bass, binding with wires or tack welding and supporting as required complete (INo 26-33, PgNo 245)(STATE SSR ) Item Spec: (Bd.F.17, Poge No. 306) 11 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking outjoints on exposed faces and watering etc. Complete. 12 Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joint, raking out joints, watering and scaffolding etc. Complete Bd.G.5 Page No.315 13 Filling in plinth and floors with contractors material/broughtfrom outside and approved by Engineer incharge in layers of 15cm, to 20cm, including watering and compaction etc.complete. (IN0 21-37, PgNo 201 ) (STATE SSR ) Item Spec. (Bd.A.11 Page No. 283) 14 Providing soling using 80 mm size trap metal in 15 cm. layerincluding filling voids with Crushed sand/grit, ramming, watering etc. Complete 15 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (INo 32-04. PgNo 268) ( STATE SSR ) ltem Spec: (Bd.L.2 Page No. 368) 16 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete...... (lNo32-11), PgNo 269) ( STATE SSR) ltem Spec: (Bd.L.7 Poge No. 369) 17 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.e... (lNo36-11, PgNo 291) (STATESSR ).Item Spec: (Bd.PI Poge No. 413 18 Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to new plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete..Spec.No.: Bd.0.8/Page No.406 19 Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting, fabricating, hoisting, erecting fixing in position, Making riveted/bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc. complete. 20 Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center- to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/ One Square Metre)...(As directed by Engineer in Charge) 21 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar,suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast ironor mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (Without mechanical gear) (INo39-24, PgNo 318) (STATE SSR) ltem Spec: (Bd.T.55, Poge No. 510) 22 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing withouf hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil point 2 coats etc. complete.BrJ. T. .’iñ, Pmge No, 509 & As directed by Engineer in charge. 23 ROYALTY 24 Royalty for sand 25 Royalty Charges for HARD MURUM 26 Royalty Charges for RUBBLE 27 MATERIALS LAB TESTS 28 Cement - Fineness, Standard Consistency,Setting Time (Initial & Final ), Compressive strength, Soundness 29 M-20 Mix Design with all tests on basic materials 30 M-20 Concrete cube compressivestrength (Set of 3 Cubes) 31 Bricks Water absorption, Specific gravity,Impact value, Crushing value 32 TMT Steel - Tensile strength ,Yield stress, ultimate tensile stress, %elongation, weight per running meter,Bend/Rebend test.(Set of 3Bars) 33 Sand - Fineness Modulus, silt & clay content. 34 Murum Plasticity Index 35 Electrification Work 36 Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia.CSR 2022-23 Item No 1-3-1/5 Additional specification No: WG- MA/PC. 37 Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia.CSR 2022-23 Item No 1-3-2/5 Additional specification No: WG- MA/PC. 38 Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia,CSR 2022-23 Item No 1-3-3/5 Additional specification No: WG- MA/PC. 39 Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.CSR2022-23 Item No 1-5-7/7 40 Supplying and erecting hylam sheet/ ebonite sheet 3 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete. CSR 2022-23 Item No 6-1-9/106 41 Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways on iron / GI frame (horizontal busbar type) CSR2022-23 Item No 5-4- 1/91 Additional specification no. SW-SWR/MCBDB 42 Supplying, erecting & marking FPMCB 63A in provided distribution board. CSR 2022-23 Item No 5- 3-16/91 Additional specification No. SW-SWR/MCB 43 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board. CSR 2022-23 Item No 5-3-7/90 Additional specification No. SWSWR/ MCB 44 Supplying & erecting conventional spike Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results. CSR 2022-23 Item No 9-1-3/160 Additional specification No. EA-EP 45 Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. CSR 2022-23 Item NO 7-1-30/128 Additional specification No CB-LT/AL 46 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 2022-23 Item No 7-6-10/140 47 Supplying & erecting Siemens type brass cable glands for 4 core 35 sq. mm./3 core 50 sq. mm. for XLPE armoured cable. CSR 2022-23 Item No 7-7- 4/141 Additional specification No. CB-GL 48 Supplying & erecting crimping type copper lugs for cable 25 sq. mm. complete. CSR 2022-23 Item No 7-9-2 / 142 Additional specification No. CB-CL/CU 49 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 2 ways for outgoing SPMCBs on iron/ GI frame. CSR 2022-23 Item No 5-4-1/91 Additional specification No. SW-SWR/MCBDB 50 Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete .CSR 2022-23 Item No 2-5-4 /28 Additional specification No . FGODF/FLS2. 51 Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads. CSR 2022-23 Item No 2-7-2 /32 Additional specification No. FG-BKT/BPC 52 Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple points head 1.2 mt. long ( Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 mm diaof requiired length with M.S. round bnase plate 25 Cm diam and 10mm thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 cm diam x 45 cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kg charcoal and salt with altemate layers of charcoal and salt and G.I.pipe 40mm dia 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note- Copper strip fropm lightening conductor is not considered in this item. OWD SSR 2022-23 Item No 44.18 / 295 Additional Spec No:BDW 1 pAGE No 581 53 Providing and fixing copper strip 25mm wide and 3mm thick for lightening conductor including fixing with screws required scaffolding etc.complete Note- Lightening conductor and earthinf pits is not considered in this item. PWD SSR 2022-23 Item No 44.19 / 595 Additional Spec No :BDW 1 Page No 581 & As directed by Engineer in Charge 54 ESHS Compliance 55 Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct Please Enable Macros to View BoQ information

BRR:9900843 Tender For Construction Of Processing Shed 91.02 Sqm-2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto1.5 m.) By Mechanical Means.... (INo21-02, PgNo153) (STATE SSR) Item Spec: (Bd.A.1 Page No. 259) 3 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift up to1.50 m) By Mechanical Mean....(INo21-06, PgNo153) (STATE SSR) Item Spec: (Bd.A.2 Page No. 259) 4 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite quartzite gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc)....(INo24-01, PgNo226) (STATE SSR) Item Spec: (Bd. E. 1 Page No. 287) 5 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering, formwork, cover blocks, laying/pumping, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc.complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc 6 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks compacting and roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled Crushed sand VSI Grade finely washed etc) reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / 7 Providing and laying Cast in situ/Ready Mix cement concrete M 20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand/Crushed sand VSI Grade finely washed etc).... (INo25-50, PgNo234) (STATE SSR) Item Spec: (Bd.F.6 Page No. 300 and B.7, Page No.38) 8 Providing and casting in situ cement concrete M-20 of trap/Granite/quartzite/gneiss metal for R.C.C. slabs and landings canopy as per detailed designs and drawings including centering, formwork, cover blocks compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc.complete, (Excluding reinforcement and structural steel). With fully automatic micro processor based PLC with SCADA enabled reversible drum type concrete mixer With natural sand.Bd.F.8 Page No.302 and B.7, Page No.38 9 Providing and laying in situ cement concrete M-20 with tremix treatment for 100 mm thickness for flooring with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen etc. complete.SSR2019-20 Item No. 33.30. 10 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, linteispardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bass, binding with wires or tack welding and supporting as required complete.... (INo26-33, PgNo245) (STATE SSR) Item Spec: (Bd.F.17, Page No. 306) 11 Providing second class Burnt Brick masonry with conventional/1.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 12 Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. CompleteBd.G.5 Page No.315 13 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15cm, to 20cm, including watering and compaction etc. complete.....(IN021-37, PgNo201) (STATE SSR) Item Spec. (Bd. A.11 Page No. 283) 14 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. Complete 15 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete....(INo32-04. PgNo268) (STATE SSR) Item Spec: (Bd. L.2 Page No. 368) 16 Providing sand faced plaster extemally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete..... (INo32-11, PgNo269) (STATE SSR) Item Spec: (Bd.L.7 Page No. 369) 17 Providing & applying washable oil-bound distemper of approved colour and shade to old & new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.....(INo36-11, PgNo291) (STATE SSR Item Spec: (Bd.P.5 Page No. 413 18 Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to old plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete.Spec.No.: Bd.O.8/Page No.406 19 Providing structural steel work in trusses, other similar trussed purlins and members with allbracing, gusset plates etc. as per detailed designs and drawings or as directed includingcutting, fabricating, hoisting, erecting fixing in position, Making riveted/bolted/weldedconnection and one coat of anticorrosive paint and over it 2 coats of oil painting approvedquality and shade etc. complete 20 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. Total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 Mpa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) váth COLORBOND (R) steel quality with thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 coat on back surface. Profile sheet shall have nom. 950-1050 mm width and nominal 25-30mm deep ribs with subtle square fluting in shall be designed for anti-capillary groove. & return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. Fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. Complete. (weight of profile 4.52 kg/sqm)..(As directed by Engineer in charge.) 21 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angie section fitted with Sliding bolts and handles for both sides, deep M. S. channel section of respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 6248-1979) (Without mechanical gear)....(INo39-24, PgNo318) (STATE SSR) Item Spec: (Bd.T.55, Page No. 510) 22 Providing and fixing steel ventilator fully glazed partly fixed as per detailed drawing without hot dip zinc coating including fabricating glazing with plain / obscured glass panes and approved type and quality and iron oxidized fixtures and fastening oil paint 2 coats etc. complete.Bd. T. 53, Page No. 509& As directed by Engineer in charge. 23 ROYALTY 24 For Sand 25 For Murum 26 For Rubble 27 MATERIALS LAB TESTS 28 Cement - Fineness, Standard Consistency,Setting Time (Initial & Final ), Compressive strength, Soundness 29 M-20 Mix Design with all tests on basic materials 30 M-20 Concrete cube compressive strength (Set of 3 Cubes) 31 Bricks Water absorption, Specific gravity,Impact value,Crushing value 32 TMT Steel - Tensile strength , Yield stress, ultimate tensile stress, % elongation, weight per running meter, Bend/Rebend test. (Set of 3 Bars) 33 Sand - Fineness Modulus, silt & clay content. 34 Murum in plinth Plasticity Index 35 SUBWORK II :- ELECTRIFICATION Work 36 Supplying & erecting mains with 2x1.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire, in HMS PVC conduit min. 20mm dia.CSR 2022-23 Item No 1-3-1/5 Additional specification No: WG- MA/PC. 37 Supplying & erecting mains with 2x2.5 sq.mm. and earth wire 1.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia.CSR 2022-23 Item No 1-3-2/5 Additional specification No: WG- MA/PC. 38 Supplying & erecting mains with 2x4 sq.mm. and earth wire 2.5 sq.mm FRLSH PVC copper wire in HMS PVC conduit min. 20mm dia,CSR 2022-23 Item No 1-3-3/5 Additional specification No: WG- MA/PC. 39 Supplying and erecting Ceiling rose / Batten holder / Slanting holder / hanging cord switch / hanging bell push / pendent holder bakelite base 6A. erected on filled polypropylene board or polished double wooden block/ PVC junction box.CSR2022-23 Item No 1-5-7/7 40 Supplying and erecting hylam sheet/ ebonite sheet 3 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete. CSR 2022-23 Item No 6-1-9/106 41 Supplying and erecting triple pole and neutral distribution board (TPNDB) surface/ flush mounted suitable for SPMCB of 12 ways on iron / GI frame (horizontal busbar type) CSR2022-23 Item No 5-4- 1/91 Additional specification no. SW-SWR/MCBDB 42 Supplying, erecting & marking FPMCB 63A in provided distribution board. CSR 2022-23 Item No 5- 3-16/91 Additional specification No. SW-SWR/MCB 43 Supplying, erecting & marking DPMCB 6 A to 32 A B- series (for lighting) in provided distribution board. CSR 2022-23 Item No 5-3-7/90 Additional specification No. SWSWR/ MCB 44 Supplying & erecting conventional spike Providing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover complete with all materials, testing & recording the results. CSR 2022-23 Item No 9-1-3/160 Additional specification No. EA-EP 45 Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe. CSR 2022-23 Item NO 7-1-30/128 Additional specification No CB-LT/AL 46 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 75 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. CSR 2022-23 Item No 7-6-10/140 47 Supplying & erecting Siemens type brass cable glands for 4 core 35 sq. mm./3 core 50 sq. mm. for XLPE armoured cable. CSR 2022-23 Item No 7-7- 4/141 Additional specification No. CB-GL 48 Supplying & erecting crimping type copper lugs for cable 25 sq. mm. complete. CSR 2022-23 Item No 7-9-2 / 142 Additional specification No. CB-CL/CU 49 Supplying and erecting single pole and neutral distribution board (SPNDB) surface/flush mounted with 2 ways for incoming and 2 ways for outgoing SPMCBs on iron/ GI frame. CSR 2022-23 Item No 5-4-1/91 Additional specification No. SW-SWR/MCBDB 50 Supplying and erecting LED Street light fitting suitable for above 40W to 48W lamp, including lamp, with PF > 0.95 class IP 65 and above housing of pressure die cast aluminium alloy and heat sink extruded aluminium complete .CSR 2022-23 Item No 2-5-4 /28 Additional specification No . FGODF/FLS2. 51 Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads. CSR 2022-23 Item No 2-7-2 /32 Additional specification No. FG-BKT/BPC 52 Providing and fixing lioghtening conductor system comprising of erecting Air-Termination consisting of tubular copper rod of 25mm dia. 1.2 mm thick with multiple points head 1.2 mt. long ( Heavy Duty) welded or clamped to G.I. pipe pole B grade 50 mm diaof requiired length with M.S. round bnase plate 25 Cm diam and 10mm thick at bottom embeded in cement concrete 1:3:6 dfoundation of size 45 cm diam x 45 cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cadmium plated nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 kg charcoal and salt with altemate layers of charcoal and salt and G.I.pipe 40mm dia 2 meter length burried in earthe upto earthling plate remining portion above ground level for watering and refilling comcpete Note- Copper strip fropm lightening conductor is not considered in this item. OWD SSR 2022-23 Item No 44.18 / 295 Additional Spec No:BDW 1 pAGE No 581 53 Providing and fixing copper strip 25mm wide and 3mm thick for lightening conductor including fixing with screws required scaffolding etc.complete Note- Lightening conductor and earthinf pits is not considered in this item. PWD SSR 2022-23 Item No 44.19 / 595 Additional Spec No :BDW 1 Page No 581 & As directed by Engineer in Charge 54 ESHS Compliance 55 Management Strategies and Implementation Plan (MSIP) to manage Environmental, Social , Health and Safety (ESHS) Risk and ESHS Code of Conduct Please Enable Macros to View BoQ information

BRR:9900523 Tender for Survey, Soil Investigation, Design, Supply Of All Materials, Labour, T&P Etc. For Construction, Erection, Completion, Testing & Commissioning Of Water Supply Works Such As Over Head Tank, Tube Well, Rising Main, Distribution System, Pump House, Boundary Wall, Gate, Site Development, Renovation Of Existing Facilities, Including Plc Scada Automation And Other Appurtenant Works Of Water Supply As Specified In Tender Document Of Chhitauni Nagar Panchayat Water Supply Reorganization Scheme, District- Kushinagar On Turnkey Basis. The Scope Of Work Also Includes Trial & Run Of 3 Months And Defect Liability Period Of 12 Months For Civil Works & 24 Months For E&M Works After Completion Of Successful Trial & Run. All Completed And Commissioned Works Of Above Scheme Shall Be Handed Over To Concerned Ulb.

BRR:9899414 Bids Are Invited For Upgradation Of Steam And Water Analysis System For 210 Mw , Scada For Remote Monitoring System In Centralized Control Room , Design, Engineering, Installation Commissioning, Testing Handing Over Of Steam And Water Analys , Comprehensive Maintenance Contract Of Swas U# 1 To 4 And Scada System For Remote Monitoring At Cent Total Quantity : 18

BRR:9898415 Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - 220Kv Substation Chhata; Suppy Of 32 Inch Led For Scada Of Samasung/Lg Or Standard Make; Na

BRR:9896377 Cathodic Protection Work For Pp Unit For Pdh-Pp Plant With Ethane And Propane Storage And Handling Facilities At Petronet Lng Limited, Dahej, Gujarat , Cathodic Protection , Permanentcathodic Protectionsystem For Rcc Piles , Survey,Design,Detailedengineering,Installation,Testingand Commissioningof Impressedcurrentcathodicprotection(C.P)Systemforsoil Side Corrosion Prevention Of Rebars In Rcc Piles As Per Details Given In The Specificationvide Documentno. B862-000-06-45-Cps-8003 Rev.0 And Iccp System For Ug Piping, Vesselsand Tanksas Per Specificationno. B862-000-06-45-Csp-01. This Will Include Testing/Commissioningof Completecp Systemand Interferencetests Includingsupply Of All Materials,Laboursalong With Preparationand Submissionof Detail Engineeringpackagewith Locationdrawings,Constructiondrawings, C.P.Systemequipment/Material Drawingsand Boqfor Procurementpurpose.All Approvedas-Builtdrawingsincludingsoftcopiesforauto Cad Drawings, Operation & Maintenancemanual For C.P. System Including Commissioningreport Shall Also Be Submitted.All Work Shall Be Carried Out Conformingto The Scope Of Work, Designbasis, Data Sheets,Specification,Standardsas Per The Tender And Provisionsof Gcc, Scc , Eil / Ow Ner Approvedsurvey Report/Design Package, Including All Materials, Equipment, Consumables,Spares, Transportation,Storage Of Materials At Site, Manpower, In Line With Direction Of Engineer-In-Charge. , Supply And Installationof Automaticcurrentcontrolled,Outdoortype, Oil Cooled,Plinth Mountedtransformerrectifierunit(T/Runit) With Integral Rtu Module, Complete With Its Accessoriesand Auxiliariesincludingearthing Arrangement,Related Civil/ Foundation/ Structural Works And Input/Outputcable Connectionand Glandingof Incomingand Outgoingcablesinside T/R Unit And Includingall Labourand Materialsas Per Specifications,Drawingsand Directionsof Engineer-In- Charge. , 75V/75A , Supplyandinstallationofoutdoortype,Plinth/Structuremountedip-55,C.P.Systempowerdistributionboard(Pdb),Completewithits Accessoriesand Auxiliariesincluding Earthing Arrangement,Related Civil/ Foundation/ Structural Works And Input/Outputcable Connectionand Glanding Of Incoming And Outgoing Cables And Also At Owner Switch Board Complete In All Respectsand Including All Labour And Materialsas Per Specifications,Drawingsand Directionsof Engineer- In-Charge. , 63Amps , Supply And Installationof Mmo Anode In Deepwell/Semideepwell Arrangementand Backfilling With Cokebreeze,Sand/ Soil Including Brick Cover After Laying As Per Specification,Drawing And Direction Of Engineer-In Charge. , 8A Rated Mmo Anode , Cokebreeze For Mmo Anode As Per Specification , 1.5Mmti-Mmo,Factorycoke Backfilledfabricjacketedmixed Metal Oxide Coatedtitaniumwire Anode With Kynar Insulationand Hmw Pe Sheathingas Per Spec. No. B862-000-06-45-Csp-01 , Supplyand Installationof Junctionboxes,Layingof Cables,Connection,Terminationand Glandingof Cablesat Junctionbox End For +Ve Header,-Ve Header, Drainage,Measurement,Referencecell,Anodeleadcablesincludingsupportingand Mountingarrangementsforjunctionbox Relatedcivil/Foundation Works, Excavation Of Concrete Pavement/Soil Whichever Existing For Installation, Backfilling And Restoration Of The Concrete Pavement Wherever Existing After Completion Of Works Etc. Complete And Including All Labour/ Materials As Per Specifications,Drawings And Direction Of Engineer-In-Charge. , Anode Junction Boxes (Ajb) Suitable For Classified Areas , Cathode Junction Boxes (Cjb) Suitable For Classified Areas , Monitoring Junction Box (Mjb) Suitable For Non-Classified Areas , Power Distribution Box (Pdb) Suitable For Non-Classified Areas , Supply And Laying Of Following Cables Including Back Filling, Arrangement Of Nullah/Road Crossing By Using Proper Size Pvc Conduit Pipe For Each Cable Including Restoration Of Any Damage Of Nullah/Roadcrossing, Clamping Cables At Cable/Pipe Racks And Structureswherever Existing, Laying Through Gi/Pvc Conduit Under Rcc Pavement,Laying Through Existing Cable Trench Or Cable Tray Inside/Outsidesubstation Building, Supply And Installation Of All Accessoriesrequired For Cable Laying Including Cable Markers Etc. Complete And Including All Labours And Materials As Per Specification And Instructionsof Engineer-In-Charge. Gi/Pvc Conduit Pipe To Be Used Shall Be 50 Mm N.B.,2.9Mm W .T & 25 Mm N.B.,2.65Mm W .T , 1C X 95Sq.Mm - Anode & Cathode Header Cable (Al, Al Wire Armoured, Pvc Insulated And Pvc Sheathed) , 1C X 50Sq.Mm - Drainage Cable (Cu, Al Wire Armoured, Pvc Insulated And Pvc Sheathed) , 4C X 50Sq.Mm - Power Cable Between Power Source And Pdb (Al, Pvc Insulated And Pvc Sheathed, Armoured) For 63Amp Pdb , 3C X 25Sq.Mm - Power Supply Cable Between Power Pdb & Tr Unit (Al, Al Wire Armoured, Pvc Insulated And Pvc Sheathed) , 1C X 35Sq.Mm - Earthing Cable (Al, Unarmoured, Pvc Insulated And Pvc Sheathed) , 1C X 10Sq.Mm - Anode Lead Cable Between Anode To Ajb (Cu, Unarmoured, Pvdf Insulated, Hmw Pe Sheathed) , 1C X 4Sq.Mm - Reference Cell / Measurement Cable (Cu, Pe/Pvc Insulated And Pvc Sheathed, Screened And Armoured Cable) Between Ref Cell /Vessel To Mjb , 10C X 2.5Sq.Mm- Referencecell / Measurementcable Betweenmjb To Tru& Cjb To Mjb (Cu,Pe/Pvcinsulatedand Pvcsheathed,Screenedand Armoured) , 24C X 2.5Sq.Mm- Referencecell / Measurementcable Betweenmjb To Rtu & Tru To Rtu (Cu,Pe/Pvcinsulatedand Pvcsheathed,Screenedand Armoured) , 3C X 16Sq.Mm - Power Supply Cable Between Pdb To Rtu/Plc For Central Monitoring (Al, Pvc Insulated And Pvc Sheathed, Al Wire Armoured) , Rs485 Network Cable, 1.0Mm2, 2-Pair, Each Pair Twisted And Laid, Numbered Or Colour Coded, Solid Copper Conductor, Pe/Pc Insulated And Sheathed, Provided With Polyester Tape Over It, Screened With Poly Aluminium Tape Of 0.3Mm And Armoured With One Layer Of Gi Wire Cable, To Be Laid Between Rtu & Fo Junction Box Located At Each Tru Shed And Master Computer & Fo Junction Box Located At S/S , Fibre Optic Cable, 6 Core, Single Mode, For Central Monitoring System To Be Laid Between The Fo Junction Box Located At Each Tru Shed And The Fo Junction Box Located At S/S , Cp Bonding Cable 1Cx10 Sq. Mm , Supply & Making Cable To Rebar Joint By Thermitwelding Method Or Pin Brazing Method Includingexcavationof Concrete Pavement/Soilwhereverexisting And Including Supply Of All Consumables, Labours And Materials As Per Specifications,Drawings And Directions Of Engineer-In-Charge. , For 50Mm2 Cable , For 4Mm2 Cable , Supply And Installation Of Permanent Reference Cells (Cu/Cuso4 Type) Or (Ag/Agcl) Type , Soil Resistivity Survey: Conducting Soil Resistivity Survey At Plant Locations(At Differentdepths, Till Bottom Level Of The Pile) Including Supply Of All Necessarymaterial And Labour And As Per Specifications,Drawings And Instructions Of Engineer-In-Charge. , Computerised Central Monitoring & Control System , Supply And Installation Of Cp System Central Monitoring And Control Consideringrs485 Over Fibre Optics As The Communicationnetwork Between Rtu/Plc & Master Computer Located At Central Control Room Along With Its Scada Soft Ware / Hardware And Supply Of Central Monitoring Pc Along With Accessories As Per Specificationfor Central Monitoring & Control Of Tr Unit, Gps Based Synchronisedswitching On /Off Of Tr Units & On/Off Potential Monitoring Of Permanent Reference Cells For Rcc Piles In Real Time, All Tru Located In Each Shed At Each S/S Along With All Ref.Cell Within The Influence Of Zone Of Protection For Each Tru For Rcc Piles Shall Be Monitored And Controlled Through Central Monitoring And Control System As Per Specification And Direction Of The Engineer-In-Charge. , Supplyand Installationof Test Point,With Installationof 4 Hdpe/Pvcperforatedpipe Verticallyupto Pipe Depth By Suitabledrilling Methodfor Installationof Permanent Reference Cells As Per Specification & Drawing & Direction Of Engineer-In-Charge. , Cp Monitoring Coupons With Cables As Per Specification , Supply Of Instruments For O & M Of Cp System As Specification B862-000-06-45-Cps-8003 Rev.0 And B862-000-06-45-Csp-01. , Supply And Installation Of Common Sun/Rain Shed In Non -Classified Area For T/R Units, Pdb, Mjb & Rtu/Plc Etc. , Mandatory Spares For C.P System As Given In Doc No. B862-000-06-45-Cps-8003 Rev.0 And B862-000-06-45-Csp-01. , Supply And Installationof Test Point, With Installationof 4 Hdpe/Pvcpipe Vertically Upto 10M Depth By Suitable Drilling Method For Potential Measurementby Manual Method Using Portable Reference Cells As Per Specification & Drawing & Direction Of Engineer-In-Charge. , Note:- The Above Rate Shall Be Inclusive Of All Taxes & Duties, Royalties, Cess, Fee, Enviormental & Pollution, Fitness & Safety Clearance Charges (If Any), Or Any Other Incidental Charges Etc But Excluding Gst. => Limited

BRR:9894729 Tender for Sirsa Town- Construction Of 25.00 Mld Mps For 10.00 Mld Stp With Peak Factor 2.50 At Kelnia Road Sirsa Town On Sbr Technology Consisting Of Main Pumping Station, Inlet Chamber, Mechanical Coarse Screen, Mechanical Fine Screen And Channel, Grit Chambers, Sbr Basins, Fibre Disc Filter, Mechanical Sludge Dewatering Device (Centrifuge)/ Belt Filter Press, Chlorinators, Chlorine Contact Tank, Di Pipe Gravity Main For Disposal Of Treated Effluent Upto Existing Effluent Channel Along With Bye Pass Arrangement, Centrifuge Feed Sump, Polyelectrolyte Dosing System, With Plc Scada, Cctv Cameras Including Pumping Machinery And Lab Equipment And Replacement Of 1100 Mm Reinforced Cement Concrete Pipe With Hdpe Liner Along Rania Mini Bypass To Stp, Replacement Of Pumping Machinery At Mps Nattar Etc. Including Roads And Pathway And Other Items Fully Described In The Nit Including Oand M For 12 Months During Defect Liability Period After Successful Trail Run Of 3 Months And Five Years Thereafter At Sirsa Town

BRR:9893953 Bids Are Invited For Digital Multi-Channel Analyzer With Software Support And Data Acquisition System Total Quantity : 1

BRR:9893813 Bids Are invited for Providing For Foundation In Earth, Soil Of All Types, Sand - Providing For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Providing, Ramming, Watering Including Shoring And Strutting Etc. Complete. Lift Upto 1.5 M. By Mechanical Means , Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids - Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids With Crushed Sandgrit, Ramming, Watering Etc. Complete. , Providing And Laying Cast In Situready Mix Bond Strong - Providing And Laying Cast In Situready Mix Bond Strong In M10 Of Trap Granite Quartzite Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Layingpumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixerstrong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed Sand Vsi Grade Finely Washed Etc , Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite - Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite Gneiss Metal For Rec Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Rec Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Layingpumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided Excluding Reinforbond And Structural Steel Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer Strong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed San

BRR:9893812 Bids Are invited for Providing For Foundation In Earth, Soil Of All Types, Sand - Providing For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Providing, Ramming, Watering Including Shoring And Strutting Etc. Complete. Lift Upto 1.5 M. By Mechanical Means , Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids - Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids With Crushed Sandgrit, Ramming, Watering Etc. Complete. , Providing And Laying Cast In Situready Mix Bond Strong - Providing And Laying Cast In Situready Mix Bond Strong In M10 Of Trap Granite Quartzite Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Layingpumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixerstrong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed Sand Vsi Grade Finely Washed Etc , Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite - Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite Gneiss Metal For Rec Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Rec Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Layingpumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided Excluding Reinforbond And Structural Steel Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer Strong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed San

BRR:9893811 Bids Are invited for Providing For Foundation In Earth, Soil Of All Types, Sand - Providing For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Providing, Ramming, Watering Including Shoring And Strutting Etc. Complete. Lift Upto 1.5 M. By Mechanical Means , Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids - Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids With Crushed Sandgrit, Ramming, Watering Etc. Complete. , Providing And Laying Cast In Situready Mix Bond Strong - Providing And Laying Cast In Situready Mix Bond Strong In M10 Of Trap Granite Quartzite Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Layingpumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixerstrong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed Sand Vsi Grade Finely Washed Etc , Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite - Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite Gneiss Metal For Rec Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Rec Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Layingpumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided Excluding Reinforbond And Structural Steel Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer Strong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed San

BRR:9893810 Bids Are invited for Providing For Foundation In Earth, Soil Of All Types, Sand - Providing For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Providing, Ramming, Watering Including Shoring And Strutting Etc. Complete. Lift Upto 1.5 M. By Mechanical Means , Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids - Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids With Crushed Sandgrit, Ramming, Watering Etc. Complete. , Providing And Laying Cast In Situready Mix Bond Strong - Providing And Laying Cast In Situready Mix Bond Strong In M10 Of Trap Granite Quartzite Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Layingpumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixerstrong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed Sand Vsi Grade Finely Washed Etc , Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite - Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite Gneiss Metal For Rec Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Rec Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Layingpumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided Excluding Reinforbond And Structural Steel Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer Strong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed San

BRR:9893809 Bids Are invited for Providing For Foundation In Earth, Soil Of All Types, Sand - Providing For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Providing, Ramming, Watering Including Shoring And Strutting Etc. Complete. Lift Upto 1.5 M. By Mechanical Means , Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids - Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids With Crushed Sandgrit, Ramming, Watering Etc. Complete. , Providing And Laying Cast In Situready Mix Bond Strong - Providing And Laying Cast In Situready Mix Bond Strong In M10 Of Trap Granite Quartzite Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Layingpumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixerstrong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed Sand Vsi Grade Finely Washed Etc , Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite - Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite Gneiss Metal For Rec Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Rec Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Layingpumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided Excluding Reinforbond And Structural Steel Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer Strong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed San

BRR:9893787 Bids Are invited for Providing For Foundation In Earth, Soil Of All Types, Sand - Providing For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Providing, Ramming, Watering Including Shoring And Strutting Etc. Complete. Lift Upto 1.5 M. By Mechanical Means , Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids - Providing Soling Using 80 Mm Size Trap Metal In 15 Cm. Layer Including Providing Voids With Crushed Sandgrit, Ramming, Watering Etc. Complete. , Providing And Laying Cast In Situready Mix Bond Strong - Providing And Laying Cast In Situready Mix Bond Strong In M10 Of Trap Granite Quartzite Gneiss Metal For Foundation And Bedding Including Bailing Out Water, Steel Centering, Formwork, Layingpumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing If Required And Curing Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixerstrong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed Sand Vsi Grade Finely Washed Etc , Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite - Providing And Laying In Situ Ready Mix Bond Strong M20 Of Trap Granite Quartzite Gneiss Metal For Rec Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of Rec Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering Formwork, Layingpumping Cover Blocks, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided Excluding Reinforbond And Structural Steel Etc. Complete, With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer Strong Batch Mix Plant Pan Mixer Etc. Complete. With Fine Aggregate Natural Sand Crushed San

BRR:9887905 Supply Of Supply, Design, Installation & Commissioning Of Fully Automated Computerized Scada Based Rmpu Microprocessor Testing Test Bench. As Per Annexure-Asupply, Design, Installation & Commissioning Of Fully Automated Computerized Scada Based Rmpu Microprocessor Testing Test Bench. As Per Annexure-A,Supply, Design, Installation & Commissioning Of Fully Automated Computerized Scada Based Rmpu Microprocessor Testing Test Bench. As Per Annexure-A [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9886819 Bids Are Invited For Annual Maintenance Contract (Amc) Of Data Acquisition And Post Processing Systems Shall Cover Quarterly Service And Maintenance Of All The Subsystems Including Hardware And Software

BRR:9886684 Bids Are Invited For Software Support Services 2.0 - Supply And Installation Of Latest Scada Software (Including Modification Of Graphic /Logic In New Facilities) Having Dual Redundancy License Along With Redundant Serverfor Tas System And Supervision Of Dismantling And..

BRR:9919329 Tender for Purchase Of Computer Table & Chairs - 2 Sets For Internet Of Things Laboratory , Purchase Of Computer Table & Chairs ( As Per Nit ) , Purchase Of Computer Table & Chairs

BRR:9904006 Tender for Supply Of Electronics And Telecommunication Engineering Branch Lab Equipment And Accessories Items , Lab Equipment Item , Pcb Prototype Machine , Electronics Work Bench , Internet Of Things Trainner Kit , Electric Pcb Bench Drill Machine , Pn Junction/Zener Diode Characteristics , Mosfet Fet Characteristics , Rectifier And Filter Circuit Trainer , Universal Plc Platform With Hmi And Plc Meter , Pid Controller Trainer Kit , Control System Simulator , 8051 Microcontroller Training Kit , 8085 Microprocessor Training Kit , Local Area Network (Lan) Trainer Kit , Lvdt Trainer Kit , Dc Slide Wire Potentiometer (Calibration Of Voltmeter And Ammeter , Strain Gauge Trainer , Global System For Mobile Communication , Ask, Fsk, Bpsk, Dbpsk Modulator & Demodulator , Delta, Adaptive Delta, Sigma Delta Modulator & Demodulator , Pcm, Dpcm, Cvsd Modulator & Demodulator , Radar Trainer , Digital Logic Kit , Booelan & Demorgans Theorem Trainer , Adder & Subtractor Trainer , Multiplexer & Demultiplexer Trainer Kit , Flip Flop Trainer Kit , Shift Register Trainer Kit , Frequency Modulation & Demodulation Trainer Kit , Dsb/Ssb Am Receiver , Optical Fiber Communication , Lab Accessories Items , Digital Multimeter , Bench Power Supply , Soldering Station , Solder Wire (Lead-Free) , Desoldering Pump / Solder Wick , Breadboard , Jumper Wires , Resistor Kit , Capacitor Kit , Leds Kit , 7 Segment Display , Switches / Push Buttons , Wire Strippers / Cutters / Pliers , Tweezers (Anti-Static) , Esd Mat & Wrist Strap , Storage / Component Organizer Boxes , Safety Gear , Heat-Shrink Tubing Assortment , Heat Gun , Multimeter Test Leads / Probes , Magnifying Lamp / Bench Microscope , Pcb Etching Kit , Crimping Tool , Digital Thermometer / Temperature Sensor , Arduino Uno Development Board , Raspberry Pi , Dc Motors (Small) , Relay Module , Sensors Kit , Logic Ic Kit , Function Probe Set , Transformer Set , Zero Pcb , Tool Kit Set , First-Aid Kit , Battery , Soldering Paste Flux , Eeprom Chi

BRR:9884762 Bids Are Invited For Package No. 1 - Atal Tinkering Lab Of Niti Aayog Electronics Development, Robotics, Internet Of Things And Sensors (Q3) Total Quantity : 1

BRR:9921517 GENERAL-Chottanikkara GP - SHE Gym Chottanikkara-Elefn. ofSHE Gym Chottanikkara-General Electrical work --- 1 electrification 2 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point 3 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point 4 90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point 5 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points 6 90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 7 90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps 8 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. 9 OD195768/2025-2026:supply and providing LED bulb 9/12watts philips/equivalent 10 90.3.19.3:Supply conveyance, installation, testing and commissioning the light fittings of following types made from CRCA sheet 0.5mm thickness with all accessories andlamps directly on wall and giving connections with 16/0.20 mm 3 core PVC insulated and sheathed round copperconductor flex wire or extending the original wiring and giving connections as required1200 mm 1X20W LED Lamp with box type fixture 11 90.4.3:Conveyance installation testing and commissioning ceiling fan of all sizes using standard accessories excluding resistance type regulator wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire or extending the original wiring etc. as required. 12 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. 13 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply 14 90.4.10:Conveyance, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan. 15 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 16 OD195972/2025-2026:Supply, conveyance, installation, testing and commissioning Exhaust fan of the following sizesand giving connection with existing wire.-250 mm light duty with self opening lowers working in single phase 230V AC supply. 17 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 18 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm 19 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 20 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm 21 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 22 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 23 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 24 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 25 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 26 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) 27 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door 28 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 29 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 30 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 31 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 32 OD195942/2025-2026:Supply and installation of Hot press moulded SMC single phase meter box of size 350x250x150mm- sintex make GS-MB-3425 or equivalent

BRR:9917290 Bids Are Invited For Custom Bid For Services - 200150114 Third Party Protection Audit Of Electrical System Of Ntpc Rihand

BRR:9917001 Bids Are Invited For Special Grade - Indian Teak Wood Scantling 304Mm X 300Mm X 4000 Mm As Per Tts Inclusive Third Party , Special Grade - Indian Teak Wood Scantling 100Mm X 375Mm X 4000Mm As Per Tts Inclusive Third Party I , Special Grade - Indian Teak Wood Scantling 300Mm X 300Mm X 4000 Mm As Per Tts Inclusive Third Party Total Quantity : 1196

BRR:9916180 Bids Are Invited For Hiring Of Consultants - Milestone/Deliverable Based - T4s Audit Pngrb Acrediatd Tpia Unnao Lpg Plant; T4s Audit Pngrb Acrediatd Tpia Unnao Lpg Plant; No; Onsite , Hiring Of Consultants - Milestone/Deliverable Based - T4s Audit Pngrb Acrediatd Tpia At Gorakhpur Lpg Plant; T4s Audit Pngrb Acrediatd Tpia At Gorakhpur Lpg Plant; No; Onsite , Hiring Of Consultants - Milestone/Deliverable Based - T4s Audit Pngrb Acrediatd Tpia At Gonda Lpg Plant; T4s Audit Pngrb Acrediatd Tpia At Gonda Lpg Plant; No; Onsite , Hiring Of Consultants - Milestone/Deliverable Based - T4s Audit Pngrb Acrediatd Tpia At Patna Lpg Plant; T4s Audit Pngrb Acrediatd Tpia At Patna Lpg Plant; No; Onsite , Hiring Of Consultants - Milestone/Deliverable Based - T4s Audit Pngrb Acrediatd Tpia At Ch Aran Lpg Plant; T4s Audit Pngrb Acrediatd Tpia At Ch Aran Lpg Plant; No; Onsite , Hiring Of Consultants - Milestone/Deliverable Based - T4s Audit Pngrb Acrediatd Tpia Purnea Lpg Plant; T4s Audit Pngrb Acrediatd Tpia Purnea Lpg Plant; No; Onsite

BRR:9915440 Bids Are Invited For Event Or Seminar Or Workshop Or Exhibition Or Expo Management Service - National; Conferences; Marketing And Promotion, Venue Development, Coordination And Staffing, Complete Execution Of Activity; Third-Party Premise; Full Day

BRR:9912282 Tender For Har-Ki-Pauri Revitalisation (Haridwar)- 1 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead. 2 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved. 3 40 Mm Thick Fine Dressed Stone Flooring Over 20 Mm (Average) Thick Base Of Cement Mortar 1:5 (1 Cement : 5 Coarse Sand), Including Pointing With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) With An Admixture Of Pigment To Match The Shade Of Stone 4 Red Sand Stone 5 Extra For Pre Finished Nosing In Treads Of Steps Of Kota Stone/ Sand Stone Slab. 6 Providing & Laying Of Makrana White Marble Superior Quality Stone Flooring With 40 Mm Thick, As Per Sample Of Marble Approved By Engineer-In-Charge, Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Grey Cement Slurry, Including Rubbing And Polishing Complete. 7 40 Mm Thick Makrana Marble White Superior Quality 8 Providing And Laying 40 Mm Thick Granite Z-Black Superior Quality Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 40 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. 9 40 Mm Thick Granite Z-Black Superior Quality 10 Dismantling Steel Work In Single Sections Including Dismembering And Stacking Within 50 Metres Lead In: 11 Channels, Angles, Tees And Flats 12 Dismantling Steel Work Manually/ By Mechanical Means In Built Up Sections Without Dismembering And Stacking Within 50 Metres Lead As Per Direction Of Engineer-In-Charge 13 Demolishing R.C.C. Work By Mechanical Means And Stockpiling At Designated Locations And Disposal Of Dismantled Materials Up To A Lead Of 1 Kilometre, Stacking Serviceable And Unserviceable Material Separately Including Cutting Reinforcement Bars 14 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 15 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 16 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form Work For : 17 Foundations, Footings, Bases For Columns 18 Providing And Fixing Stainless Steel ( Grade 304) Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purposes Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). 19 Providing And Fixing Isi Marked Ss Tower Bolt (Plate Type) With Necessary Screws Etc. Complete (Copper Oxidised As Per Is 1378): Size 200X10Mm 20 Providing And Fixing Stainless Steel Door Latch With Necessary Screws Etc. Complete :: Size 300X16Mmx5Mm 21 Providing And Fixing Stainless Steel ( Grade 304) 6Mm Dia Solid Chain Made Of Soild Rod Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature (Wherever Required) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I/C Fixing The Railing & Pcc/Rcc With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Under Of The Floor Or The Side Of Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, (For Payment Purposes Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc.). 22 Drilling Suitable Holes In Reinforced Or Plain Cement Concrete With Power Driven Drill Machine To A Minimum Depth Of 100 Mm Upto 200 Mm In Rcc Beams, Lintels, Columns And Slabs To Introduce Steel Bars For Sunshades/ Balconies Including Fixing The Steel Bars In Position Using Epoxy Resin Anchor Grout Of Approved Make But Excluding The Cost Of Reinforcement, All Complete As Per Direction Of Engineer-In-Charge. 23 Upto And Including 12 Mm Dia. 24 Providing And Laying In Position Specified Grade Of Reinforced Cement Concrete, Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement - All Work Up To Plinth Level : 25 1:1.5:3 (1 Cement : 1.5 Coarse Sand (Zone-Iii) Derived Fromnatural Sources : 3 Graded Stone Aggregate 20 Mm Nominalsize Derived From Natural Sources) 26 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 27 Walls (Any Thickness) Including Attached Pilasters, Butteresses, Plinth And String Courses Etc. 28 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth Level. 29 Thermo-Mechanically Treated Bars Of Grade Fe-500D Ormore. 30 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 31 Applying Priming Coats With Primer Of Approved Brand And Manufacture, Having Low Voc (Volatile Organic Compound ) Content. 32 With Water Thinnable Cement Primer On Wall Surface Having Voc Content Less Than 50 Grams/Litre 33 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 34 New Work (Two Or More Coat Applied @ 1.67 Ltr/10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre/10 Sqm) 35 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. 36 All Kinds Of Soil 37 Filling Available Excavated Earth (Excluding Rock) In Trenches, Plinth,Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth,Consolidating Each Deposited Layer By Ramming And Watering, Lead Upto 50 M And Lift Upto 1.5 M. 38 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work; Using Coarse Aggregate And Fine Aggregate Derived From Natural Sources, Portland Pozzolana / Ordinary Portland /Portland Slag Cement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge, For The Following Grades Of Concrete.: Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 110% Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. 39 All Works Upto Plinth Level 40 Concrete Of M35 Grade With Minimum Cement Content Of 370 Kg /Cum 41 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 42 Foundations, Footings, Bases Of Columns, Etc. For Mass Concrete 43 Suspended Floors, Roofs, Landings, Balconies And Accessplatform 44 Stairs, (Excluding Landings) Except Spiral-Staircases 45 Construction Of Embankment With Material Obtained From Borrow Pits Construction Of Embankment With Approved Material Obtained From Borrow Pits With A Lift Upto 1.5 M, Transporting To Site, Spreading, Grading To Required Slope And Compacting To Meet Requirement Of Tables 300.1 And 300.2 With A Lead Upto 1000 M As Per Technical Specification Clause 301.5 46 For Additional 19 Km Carriage.For Above Item No.3-4 (Mord) 47 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres) 48 Steel Work In All Types Of Sections Upto A Height Of 5 M Above Plinth Level Excluding Cutting Of Rivet. Including Dismembering 49 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres) 50 Lime /Cement Concrete: By Mechanical Means For Items No. 2.04( B) & ( C): Cement Concrete Grade M-15 & M-20 51 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres) Lime /Cement Concrete: By Mechanical Means For Items No. 2.04( B) & ( C): Prestressed / Reinforced Cement Concrete Grade M-20 & Above. 52 Plain Cement Concrete 1:3:6 Nominal Mix In Foundation With Crushed Stone Aggregate 40 Mm Nominal Size Mechanically Mixed, Placed In Foundation And Compacted By Vibration Including Curing For 14 Days. 53 Furnishing And Placing Reinforced/Prestressed Cement Concrete In Super-Structure As Per Drawingand Technical Specification 54 Rcc Grade M25: Using Batching Plant, Transit Mixer And Concrete Pump: For Solid Slab Super-Structure, Height 5M To 10M 55 Supplying, Fitting And Placing Hysd Bar Reinforcement In Super-Structure Complete As Per Drawing And Technical Specifications 56 Providing And Laying 40Mm Sand Blasted (Lakshmi Brown) Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 40 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : 57 Providing And Laying Sand Blasted (Sera Grey) Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18-20 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : 58 Providing And Laying Sand Blasted (Steel Grey) Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18-20 Mm Thick Stone Slab Over 20 Mm (Average) Thick Base Of Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing, Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge : 59 52 Mm Thick Cement Concrete Flooring With Concrete Hardener Topping, Under Layer 40 Mm Thick Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20 Mm Nominal Size) And Top Layer 12 Mm Thick Cement Hardener Consisting Of Mix 1:2 (1 Cement Hardener Mix : 2 Graded Stone Aggregate 6 Mm Nominal Size) By Volume, Hardening Compound Mixed @ 2 Litre Per 50 Kg Of Cement Or As Per Manufacturer’S Specifications. This Includes Cost Of Cement Slurry, But Excluding The Cost Of Nosing Of Steps Etc. Complete. 60 Rubbing On Existing Stone Flooring And Filling Of Grooves With Cement Mortar 1:2 (1 Cement : 2 Stone Dust) Admixed With Pigment To Match The Shade Of Stone Etc. Complete In All Respect As Per Direction Of Engineer-In-Charge. 61 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 62 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 63 Protection To Substructure By Using Coal Tar Epoxy-Providing And Applying Two Coats Of Two Comonent,High Build,100% Solid Content,Low Voc,Polycyclin, Aromatic Hydrocarbon Based,Pot Life2Hrs@72 Degreef,Tack Free-4-6 Hrs,Dft Per Coat 80-120 Microns(Dry) Coal Tar Epoxy Coating With Coal Tar. 64 Finishing Walls With Water Proofing Cement Paint Of Required Shade : 65 New Work (Two Or More Coats Applied @ 3.84 Kg/10 Sqm) 66 Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 67 In Gratings, Frames, Guard Bar, Ladder, Railings, Brackets, Gates And Similar Works 68 Finishing With Epoxy Paint (Two Or More Coats) At All Locations Prepared And Applied As Per Manufacturer’S Specifications Excluding Appropriate Priming Coat, Preparation Of Surface, Etc. Complete 69 On Steel Work 70 Extra For Making Chequers Of Approved Pattern On Cement Concrete Floors, Steps, Landings, Pavements Etc. 71 Steel Work Welded In Built Up Sections/ Framed Work, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer Using Structural Steel Etc. As Required. 72 In Stringers, Treads, Landings Etc. Of Stair Cases, Including Use Of Chequered Plate Wherever Required, All Complete 73 Plastering With Cement Mortar (1:4), 15 Mm Thick On Brickwork In Substructure As Per Technical Specification Clauses 613.4 & 1204 74 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 75 Designing, Enlarging, Supplying, Execution, Transportation, Fixing And Installation Of 2 Panels At Har Ki Pauri, At Haridwarsize: 18Ft X 13Ft = 234 Sftwt: 280 To 300 Kgs Per Panelfasteners: 5’ – 24 To 30 Pcs 76 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Naturalsources, Portland Pozzolana / Ordinary Portland /Portland Slagcement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete. Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 1.10 Times Of The Specified Minimum Cement Content, The Contractor Shall Havediscretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. 77 All Works Above Plinth Level Upto Floor V Level 78 Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum 79 Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 80 Distempering With 1St Quality Acrylic Distemper (Ready Mixed) Having Voc Content Less Than 50 Gram/Litre, Of Approved Manufacturer And Of Required Shade And Colour All Complete To Achieve Even Shade And Colour : 81 New Work (Two Or More Coats) Over And Including Water Thinnable Priming Coat With Cement Primer Having Voc Content Less Than 50 Gram/Litre 82 Finishing With Deluxe Multi Surface Paint System For Interiors And Exteriors Using Primer As Per Manufacturers Specifications : 83 Two Or More Coats Applied On Walls @ 1.25 Ltr/10 Sqm Over And Including One Coat Of Special Primer Applied @ 0.75 Ltr /10 Sqm 84 Earth Work In Excavation By Mechanical Means (Hydraulic Excavator)/ Manual Means Over Areas (Exceeding 30 Cm In Depth, 1.5 M In Width As Well As 10 Sqm On Plan) Including Getting Out And Disposal Of Excavated Earth Lead Upto 50 M And Lift Upto 1.5 M, As Directed By Engineer-Incharge. 85 Ordinary Rock (5% L.S) 86 Supplying And Filling In Plinth With Sand Under Floors, Including Watering, Ramming, Consolidating And Dressing Complete. 87 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 88 1:4:8 (1 Cement : 4 Coarse Sand (Zone-Iii) Derived From Natural Sources : 8 Graded Stone Aggregate 20 Mm Nominal Size Derived From Natural Sources) 89 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 (1 Cement: 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stoneaggregate 20 Mm Nominal Size Derived From Natural Sources) Over 75Mmthick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation,Levelling & Dressing & Finishing The Top Smooth. 90 Providing And Laying In Position Ready Mixed Or Site Batched Design Mix Cement Concrete For Reinforced Cement Concrete Work;Using Coarse Aggregate And Fine Aggregate Derived From Naturalsources, Portland Pozzolana / Ordinary Portland /Portland Slagcement, Admixtures In Recommended Proportions As Per Is: 9103 To Accelerate / Retard Setting Of Concrete, To Improve Durability And Workability Without Impairing Strength; Including Pumping Of Concrete To Site Of Laying, Curing, Carriage For All Leads; But Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement As Per Direction Of The Engineer-In-Charge; For The Following Grades Of Concrete.Note: Extra Cement Up To 10% Of The Minimum Specified Cement Content In Design Mix Shall Be Payable Separately. In Case The Cement Content In Design Mix Is More Than 1.10 Times Of The Specified Minimum Cement Content, The Contractor Shall Have Discretion To Either Re-Design The Mix Or Bear The Cost Of Extra Cement. 91 5.33.1 All Works Upto Plinth Level 92 Concrete Of M25 Grade With Minimum Cement Content Of 330 Kg /Cum 93 All Works Above Plinth Level Upto Floor V Level 94 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For 95 Columns, Pillars, Piers, Abutments, Posts And Struts 96 5.30 Add For Plaster Drip Course/ Groove In Plastered Surface Or Moulding To R.C.C. Projections. 97 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 98 Cement Mortar 1:6 (1 Cement : 6 Coarse Sand) 99 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:6 (1 Cement: 6 Fine Sand) 100 12 Mm Cement Plaster Of Mix : 101 1:6 (1 Cement: 6 Fine Sand) 102 Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Door/Window/Clerestory Windows & Other Frames/ Chowkhat Comprising Of Virgin Pvc Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/ Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Fabricated With Miter Joints After Applying Pvc Solvent Cement And Screwed With Full Body Threaded Star Headed Ss Screws Having Minimum Frame Density Of 750 Kg/Cum, Screw Withdrawal Strength Of 2200 N (Face) & 1100 N (Edge), Minimum Compressive Strength Of 58 N/Mm2, Modulus Of Elasticity 900 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixed In Position With M.S Hold Fast/Lugs/Ss Dash Fasteners Of Required Dia And Length Complete As Per Direction Of Engineer-In- Charge. (M.S Hold Fast/Lugs Or Ss Dash Fasteners Shall Be Paid For Separately).Note: For Wpc Solid Door/Window Frames, Minus 5 Mm Tolerance In Dimensions I.E Depth And Width Of Profile Shall Be Acceptable. Variation In Profile Dimensions On Plus Side Shall Be Acceptable But No Extra Payment On This Account Shall Be Made. 103 Frame Size 65 X 125 Mm 104 Providing And Fixing Factory Made Single Extruded Wpc (Wood Polymer Composite) Solid Plain Flush Door Shutter Of Required Size Comprising Of Virgin Polymer Of K Value 58-60 (Suspension Grade), Calcium Carbonate And Natural Fibers (Wood Powder/ Rice Husk/Wheat Husk) And Non Toxic Additives (Maximum Toxicity Index Of 12 For 100 Gms) Having Minimum Density Of 650 Kg/Cum And Screw Withdrawal Strength Of 1800 N (Face) & 900 N (Edge), Minimum Compressive Strength 50 N/Mm2, Modulus Of Elasticity 850 N/Mm2 And Resistance To Spread Of Flame Of Class A Category With Property Of Being Termite/Borer Proof, Water/Moisture Proof And Fire Retardant And Fixing With Stainless Steel Butt Hinges Of Required Size With Necessary Full Body Threaded Star Headed Counter Sunk S.S Screws, All As Per Direction Of Engineer-In- Charge. (Note: Stainless Steel Butt Hinges And Necessary S.S Screws Shall Be Paid Separately) 105 35 Mm Thick 106 Providing And Laying Four Courses Water Proofing Treatment With Bitumen Felt Over Roofs Consisting Of First And Third Courses Of Blown Bitumen 85/25 Or 90/15 Conforming To Is : 702 Applied Hot @ 1.45 Kg Per Square Metre Of Area For Each Course, Second Course Of Roofing Felt Type 3 Grade-I (Hessian Based Self Finished Bitumen Felt) And Fourth And Final Course Of Stone Grit 6 Mm And Down Size Or Pea Sized Gravel Spread At 6 Cubic Decimeter Per Square Metre, Including Preparation Of Surface But Excluding Grading Complete With : 107 Bitumen Felt (Hessian Base) Type 3 Grade I Conforming To Is : 1322 108 Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) 109 For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges/ Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required (Fittings Shall Be Paid For Separately) 110 Anodised Aluminium (Anodised Transparent Or Dyed To Required Shade According To Is: 1868, Minimum Anodic Coating Of Grade Ac 15) 111 Providing And Fixing Glazing In Aluminium Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And The Directions Of Engineer-In-Charge .(Cost Of Aluminium Snap Beading Shall Be Paid In Basic Item): 112 With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) 113 Providing And Fixing Brass 100Mm Mortice Latch And Lock With 6 Levers Without Pair Of Handles (Best Make Of Approved Quality) For Aluminium Doors Including Necessary Cutting And Making Good Etc. Complete. 114 Providing And Fixing Aluminium Round Shape Handle Of Outer Dia 100 Mm With Ss Screws Etc. Complete As Per Direction Of Engineer-Incharge 115 Anodized (Ac 15 ) Aluminium 116 Providing And Fixing Chromium Plated Brass Butt Hinges With Necessary Chromium Plated Brass Screws Etc. Complete. 117 50X40X2.5 Mm (Ordinary Type) 118 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 1 0 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete: 119 200X10 Mm 120 Providing And Laying Vitrified Floor Tiles In Different Sizes (Thickness To Be Specified By The Manufacturer) With Water Absorption Less Than 0.08% And Conforming To Is: 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 (1 Cement : 4 Coarse Sand),Jointing With Grey Cement Slurry @ 3.3 Kg/ Sqm Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete 121 Size Of Tile 600X600 Mm 122 Supplying & Erection Of Porta Cabin Consist Of With 1 Room Only Size 3.05M X2.44Mx 2.59M As Per Design, Drawing & Specifications Complete In All Respect And Direction Of Engineer-In-Charge. 123 Supply, Installation, Testing & Commissioning Of Door Metal Detector 16 Zones Size As Per Design/Drawing/Specifications Complete In All Respect And Direction Of Engineer-In-Charge. Etc. Compelte In All Respect And Direction Of Engineer-In-Charge. 124 Supply, Installation, Testing, And Commissioning Drinking Water Atm Reverse Osmos Is (Ro) 100 500 Lph Specifications As Per Manufacture, Etc. Complete In All Respect As Per Direction Of Engineer-In-Charge. 125 Brick Work With Common Burnt Clay F.P.S. (Non Modular) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : 126 Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) 127 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix : 1:4 (1 Cement: 4 Fine Sand) 128 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres)By Mechanical Means For Items No. 2.04( B) & ( C): Dismantling Stone Masonry By Manual Means 129 Rubble Stone Masonry In Cement Mortar. 130 Dismantling Of Structures (Dismantling Of Existing Structures Like Culverts, Bridges, Retaining Walls And Other Structure Comprising Of Masonry, Cement Concrete, Wood Work, Steel Work, Including T&P And Scaffolding Wherever Necessary, Sorting The Dismantled Material, Disposal Of Unserviceable Material And Stacking The Serviceable Material With All Lifts And Lead Of 1000 Metres)By Mechanical Means For Items No. 2.04 (Iii) 131 Dismantling Brick / Tile Work/ Rubble Masonary/ Pitching/ Etc By Mechanical Means 132 With Ready Mixed Red Oxide Zinc Chromate Primer Of Approved Brand And Manufacture On Steel Galvanised Iron/ Steel Works 133 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade : 134 Two Or More Coats On New Work 135 White Washing With Lime To Give An Even Shade : 136 Old Work (Two Or More Coats) 137 Finishing Walls With Acrylic Smooth Exterior Paint Of Required Shade : 138 Old Work (Two Or More Coat Applied @ 1.67 Ltr/ 10 Sqm) On Existing Cement Paint Surface 139 Repair Of Steel Railing To Bring It To Original Shape Cleaning And Repainting As Per Drawing And Technical Specification Clause 1911 140 Portable Barricade In Construction Zone (Installation Of A Steel Portable Barricade With Horizontal Rail 300 Mm Wide, 2.5 M In Length Fitted On A A Frame Made With 45 X 45 X 5 Mm Angle Iron Section, 1.5 M In Height, Horizontal Rail Painted (2 Coats) With Yellow And White Stripes, 150 Mm In Width At An Angle Of 450, A Frame Painted With 2 Coats Of Yellow Paint, Complete As Per Irc:Sp:55-2001 ) 141 Making Sleeves And Cut-Outs In Rcc Walls, Beams And Slabs Of Any Shape And Size By Way Of Core Cutting As Per Requirement Ofarchitectural Instructions Inluding Necessary Tools And Machinaries, Scaffolding, Watering, Rate Also Included Carting Away The Debris From Site Time To Time Or Disposing The Material As Directed And Specified By The Architect / Client Core Cutting Width 400Mm And Depth=300Mm To 600Mm As Per Direction Of Engineer. 142 Supplying, Assembling, Lowering And Fixing In Vertical Position In Bore Well, Unplasticized Pvcmedium Well Casing (Cm) Pipe Of Required Dia, Conforming To Is: 12818, Including Required Hireand Labour Charges, Fittings & Accessories Etc. All Complete, For All Depths, As Per Direction Ofengineer -In-Charge. 143 100Mm Diameter 144 200Mm Diameter 145 Constructing Masonry Chamber 30X30X50 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement :4 Coarse Sand) For Stop Cock, With C. I.Surface Box 100X100 X75 Mm (Inside) With Hinged Cover Fixed In Reinforced Cement Concrete Slab 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand : 3 Gradedstone Aggregate 20 Mm Nominal Size), Including Necessary Excavation, Foundation Concrete 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stoneaggregate 40 Mm Nominal Size ) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design :With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Classdesignation 7.5 146 Constructing Masonry Chamber 60X60X75 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mmdeep ( Inside) With Chained Lid And Rcc Top Slab 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size), Includingnecessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : With Common Burnt Clay F.P.S.(Non Modular) Bricks Of Class Designation 7.5 147 Constructing Masonry Chamber 120X120X100 Cm Inside, In Brick Work In Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) For Sluice Valve, With C.I. Surface Box 100 Mm Top Diameter, 160 Mm Bottom Diameter And 180 Mm Deep ( Inside) With Chained Lid And Rcc Top Slab 1:1.5:3 Mix (1 Cement : 1.5 Coarse Sand : 3 Graded Stone Aggregate 20 Mm Nominal Size), Including Necessary Excavation, Foundation Concrete 1:5:10 (1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size) And Inside Plastering With Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) 12 Mm Thick, Finished With A Floating Coat Of Neat Cement Complete As Per Standard Design : 148 Demolishing R.C.C. Work Manually/ By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. 149 Supplying ,Installation , Testing , Commissioning Of Vertical Position Submersible Sewage Dewatering Unclog Pump Set For Capacity 05 Hp / 1450 Rpm , Ac 3 Ph , 440V , 50 Hz Having 100 Mm Delivery , Head 12 Meter , Discharge 500 Lpm With Cutter Plate , Sewage / Solid Handling Capacity Size 40 Mm Along With Control Panel ,15 Meter 100 Mm Pvc Hose , C.I. Bends And 15 Meter Submersible Cable Etc. 150 Supplying And Installing Pressure Gauge Of 100 Mm Ø., 0-300 Psi Or 0-21 Kg Per Cm Square Fitted With 12/15 Mm Ø. Pad Cock Valve, And G.I. Pipe, Elbow Etc. As Per Requirement In Approved Manner. 151 Supply, Erection, Jointing, Testing & Commissioning Of \C\ Class Ms Pipes (As Per Is: 1239) Including Necessary Specials Such As Tees, Bends, Flanges Reducers Etc., Complete On Wall/ Ceiling. The Pipes To Be Erected On Wall Or Suspended From Beams, Rcc Roof Slabs With Suitable Size Ms Bars/ Angle Irons Including Painting Of Metal Part Except Pipe Line. 152 80Mm Dia. 153 100Mm Dia. 154 Painting (Two Or More Coats) On Rain Water, Soil Waste And Vent Pipes And Fittings With Aluminium Paint Of Approved Brand And Manufacture Over A Priming Coat Of Ready Mixed Zinc Chromate Yellow Primer On New Work : 155 75 Mm Diameter Pipes 156 100 Mm Diameter Pipes 157 Providing And Fixing C.I. Sluice Valves (With Cap) Complete With Bolts, Nuts, Rubber Insertions Etc. (The Tail Pieces If Required Will Be Paid Separately) : 158 Sluice Valve/Scour Valve 159 100 Mm Dia. Pn-1.6. 160 Providing And Fixing Gun Metal Non- Return Valve Of Approved Quality (Screwed End) : 161 80 Mm Dia. (Class -Pn 1.0 Rating) Flanged Type 162 Providing & Fixing Following Cast Iron Double Acting Air Valves, Flanged Without Inbuilti Solating Valve As Per Is : 14845-2000 Including Jointing &Testing With Cost Of Jointing Material And Rubber Insertion All Complete Asper Is :13095-1991 163 80 Mm Dia Pn-1.6 164 Providing, Laying, Jointing, Testing And Commissioning Of Brass/ Gun Metal Gate Valve With C.I. Wheel Of Approved Quality (Screwed End) All Complete As Per Technical Specifications And As Per Direction Of Engineer. 165 32 Mm Nominal Bore 166 Excavation For Structures (Earth Work In Excavation Of Foundation Of Structures As Per Drawing And Technical Specification, Including Setting Out, Construction Of Shoring And Bracing, Removal Of Stumps And Other Deleterious Matter, Dressing Of Sides And Bottom, Backfilling The Excavation Earth To The Extent Required And Utilising The Remaining Earth Locally For Road Work.) 167 Ordinary Rock (Not Requiring Blasting) Upto 3 M Depth. Mechanical Means 168 Plain/Reinforced Cement Concrete In Sub-Structure Complete As Per Drawing And Technical Specifications 169 Rcc Grade M35 170 Height Upto 5M With Batching Plant, Transit Mixer And Concrete Pump 171 Supplying, Fitting And Placing Un-Coated Hysd Bar Reinforcement In Foundation Complete As Per Drawing And Technical Specifications 172 Filler Joint: Providing & Fixing 20 Mm Thick Compressible Fibre Board In Expansion Joint Complete As Per Drawing & Technical Specification 173 Stone Work (Machine Cut Edges) For Wall Lining Etc. (Veneer Work) Upto 10 Metre Height, Backing Filled With A Grout Of Average 12 Mm Thick Cement Mortar 1:3 (1 Cement : 3 Coarse Sand) Including Pointing In White Cement Mortar 1:2 (1 White Cement : 2 Stone Dust) With An Admixture Of Pigmentmatching The Stone Shade : (To Be Secured To The Backing And The Sides By Means Of Cramps And Pins Which Shall Be Paid For Separately) : 174 Red Sand Stone - Exposed Face Machine Cut And Table Rubbed With Rough Backing.40 Mm Thick 175 Construction Of Rock Fill Embankment With All Lifts And Lead Upto 5 Km- Construction Of Rock Fill Embankment From Roadway Excavation With Broken Hard Rock Fragments Of Size Not Exceeding 300 Mm Laid In Layers Not Exceeding 500 Mm Thick Including Filling Of Surface Voids With Stone Spalls, Blinding Top Layer With Granular Material, Rolled With Vibratory Road Roller, All Complete As Per Clause 313 176 Supplying, Fitting And Placing Un-Coated Hysd Bar Reinforcement In Foundation Complete As Per Drawing And Technical Specifications. 177 Supplying, Fitting And Placing Hysd Bar Reinforcement In Sub-Structure Complete As Per Drawing And Technical Specifications 178 Plain/Reinforced Cement Concrete In Open Foundation Complete As Per Drawing And Technical Specifications 179 Pcc Grade M15 180 With Batching Plant, Transit Mixer And Concrete Pump 181 Providing Weep Holes In Brick Masonry/Plain/Reinforced Concrete Abutment, Wing Wall/Return Wall With 100 Mm Dia Ac Pipe, Extending Through The Full Width Of The Structure With Slope Of 1V :20H Towards Drawing Foce. Complete As Per Drawing And Technical Specifications 182 Providing And Laying Of Filter Media With Granular Materials/Stone Crushed Aggregates Satisfying The Requirements Laid Down In Clause 2504.2.2. Of Morth Specifications To A Thickness Of Not Less Than 600 Mm With Smaller Size Towards The Soil And Bigger Size Towards The Wall And Provided Over The Entire Surface Behind Abutment, Wing Wall And Return Wall To The Full Height Compacted To A Firm Condition Complete As Per Drawing And Technical Specification. 183 Gabian Structure For Erosion Control, River Training Works And Protection Works (Providing And Constructing Gabain Structures For Erosion Control, River Training Works And Protection Works With Wire Crates Of Size 2 M X 1 M X 0.3 M Each Divided Into 1M Compartments By Cross Netting, Made From 4 Mm Galvanised Steel Wire @ 32 Kg Per 10 Sqm Having Minimum Tensile Strength Of 300 Mpa Conforming To Is:280 And Galvanizing Coating Conforming To Is:4826, Woven Into Mesh With Double Twist, Mesh Size Not Exceeding 100 Mm X 100 Mm, Filled With Boulders With Least Dimension Of 200 Mm, All Loose Ends To Besecurely Tied With 4 Mm Galvanised Steel Wire.) 184 Providing And Laying Pitching On Slopes Laid Over Prepared Filter Media Including Boulder Apron Laid Dry In Front Of Toe Of Embankment Complete As Per Drawing And Technical Specifications 185 Stone/Boulder 186 Geotextile Filter (Laying Of A Geotextile Filter Between Pitching And Embankment Slopes On Which Pitching Is Laid To Prevent Escape Of The Embankment Material Through The Voids Of The Stone Pitching/Cement Concrete Blocks As Well As To Allow Free Movement Of Water Without Creating Any Uplift Head On The Pitching.) 187 Sitc Of 20W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 20W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >400Mm. 188 Sitc Of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 189 Sitc Of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 150W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 190 Sitc Of High Quality Multi Color Neon Flexible Light, Protection Rating : Ip67, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 12W, Cct : Rgb/Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. 191 Sitc Of Aluminium Profile For Neon Flex 192 Sitc Of Porta Cabin Ms Structure Base Frame \C Channel Of Size 50X100X50Mm With Ms Tubular Pipe Of 75X40Mm,50X50Mm & 25X 25Mm Interconnecting Ms Pipes 6 Raised Legs Of Size100X100Mm Corner Of Size 75X75Mm. Ms Cabin Rpcc Make Manufactured Using 19 Gauge With Inner Layer Of Action Teasa Laminated Mdf Board 6Mm Thick & Insulation Of Glass Wool. The Cabin Will Be Duly Painted Outside And Inside. These Are A Water Proof, Termite; Heat And Fire Resistant And Comfortable In Extreme Hot Or Cold Climate With Lifting & Shifting Arrangement. Window Size 3X3 Aluminum Bombay Sliding Glass Window With Ms Grill & Locking Arrangements & Rain Shed, Internal Wall Paneling Will Be Done By 6Mm Laminated Board, False Ceilling Will Be Done 6 Mm Laminated Board In Wooden Finish With Glass Wool Of Density 36Kg/M3. Flooring Will Be Done By 18Mm Cement Fiber Board With Lh Vinyl Flooring. Ms Door For Main Entrance With Locking Arrangement (Eldrop Only) All Electrical Fittings Of (Ancor/ Havells) Make Including Pvc Pipe With Internal Wiring (Ancor/ Havells) External Wiring Is Out Of Our Scope 1 Nos.Bulkhead Light (Outside), 4 No. Light Point, 4 No. Fan Point, 4 Nos. 6 Amp Switch & Socket (Extra), 1 No.32 Amp Mcb Box, 1 No. 16 Amp Ac Point Paint Will Be Done By Outside Enamel Paint Of Desired Color.Split Type Airconditioner 1.5 Ton, 3 Star Bee, Inverter Technology With Stablizer. 193 Sitc Of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 80W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 194 Sitc Of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 50W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 195 Sitc Of High Quality Long Through Multi Color Linear Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 30W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik07, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Moulded Connector Having The Length >300Mm. 196 Sitc Of Dc Power Driver For The Above Lights, Power : 200W, Input : Ac 110-240V Ac, 50Hz, Output : Dc 12/24V, Protection Rating, Ip67, Surge Protection : Ll 4Kv, Le 6Kv 197 Sitc Of High Quality Dmx Decoder, Power Input : Dc 24V, 198 Sitc Of Ip Driver Box Made Up Of Pvc / Upvc For The Internal Terminations And External Outgoing Connecting Points, With Required Pvc / Brass Glands, Optional Suitable Size Mcb Fitted For Control Outgoing Circuits. 199 Sitc Of Pvc Insulated Multi Core Electrical Un Armored Flexible 5C X 0.5Sq Mm Power Cable Having Less Electrical Losses. (As Per Actuals Depending Upon The Site Condition) 200 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required 201 3C X 1.5 Sq.Mm 202 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required 203 3C X 2.5 Sq.Mm 204 Sitc Of 5 Core Dmx Cable Comprises Twisted Pairs With Shield Support For Carrying Of Data. Dmx512 Cable Is Used For Connecting All Light Consoles That Use Dmx 512 Standard Data Transmission. (As Per Actuals Depending Upon The Site Condition) 205 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 206 4C X 25 Sq.Mm 207 Supplying And Laying Of Following Size Dwc Hdpe Pipe Isi Marked Along With Allaccessories Like Socket, Bend, Couplers Etc. Conforming To Is 14930, Part Iicomplete With Fitting And Cutting, Jointing Etc. In The Existing Trench, Complete As Required 208 90Mm Dia ( Od -90Mm & Id 76Mm Nominal ) 209 Supplying And Fixing Of Following Sizes Of Medium Class Pvc Conduit Along Withaccessories In Surface/Recess Including Cutting The Wall And Making Good Thesame In Case Of Recessed Conduit As Required 210 25Mmdia 211 Sitc Of Ip65 \I\ Power Connectors Having 3/4 Pole Cable Connector, Chuck Type Strain Relief, Current Rating 20 A Rms Continuous, Easy And Extremely Precise Locking System \Quick Lock\ High Impact Materials - Long-Lasting And Reliable 212 Sitc Of Ip65 \I\ Dmx Connectors Having 3/5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, \Solder Stop\ For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. 213 Sitc Of Dmx Signal Amplifier For Improving/Amplifying The Input Signals Through Longer Distances. 214 Sitc Of Dmx Isolator Or Splitter Provides Isolated Optical Dmx Splitter Provides 8 Outputs From A 1 Input And Input Voltage: Ac 110 To 220 V, 50 Hz, Product Features: Group 1 & Group 8 Dmx Signal Change. 215 Sitc Of 5 Pin Xlr Male Connectors Having 5 Pole Cable Connector, Male/Female Connector With Improved Latch, Cage Type Contacts, \Solder Stop\ For Easy Soldering, And Additional Ground Contact For Best Contact Integrity Between Chassis And Cable Connector. More Durable Housing For Maximum Reliability. 216 Sitc Of Power Main Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options.- 8 Nos Of 32A Tpn Mcb Outgoing McbS.- 1No Of 100A Tpn Incoming Mcb. 217 Sitc Of Sub Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options.- 12 Nos Of 6/10A Sp Outgoing McbS.- 1No Of 32A Tpn Incoming Mcb. 218 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Lockingarrangement And Watering Pipe Of 2.7 Metre Long Etc. (But Without Charcoal/Coke And Salt) As Required 219 Sitc Of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory.Usb Connection • 1024 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. 220 Earth Excavation Work For Cable Laying. 221 Sitc Of Programming Charges 222 Sitc Of Supplying And Erecting Iron Work, Sheet Metal Work Consisting Of Crca Sheets, Various Sections Of Iron, Plates, Chequered Plates, Rods, Bars, Ms Pipes, Etc. For Panel Board Or Any Other Purpose With Bending, Cutting, Drilling And Welding Complete Erected At The Position With Necessary Materials Duly Painted With One Coat Of Red Oxide And Two Coats Of Enamel Paint To Match The Switchgears. 223 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 224 1:3:6 (1 Cement : 3 Coarse Sand (Zone-Iii) Derived From Natural Sources : 6 Graded Stone Aggregate 20 Mm Nominalsize Derived From Natural Sources) 225 Sitc Of 9W Mono Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 09W, Cct : 1800/3000/4000/6000K, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 15º/25º/45º/60º, Control : On/Off, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Ac 110-230V, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. 226 Sitc Of 12W Multi Color Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 12W, Cct : Rgbw, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik05, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >400Mm. 227 Sitc Of 17W Mono Color Projector Spot Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Yoke Arrangements For Fixing The Lights. Power Consumption : 17W, Cct : 1800/3000/4000/6000K, (As Per The Design Approval) Optics : Pmma With Holder, Beam Angle : 15º/25º/45º/60º, Control : On/Off, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Dc 24V(External Driver) Or Ac 110-230V, 50Hz. Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Glare : Specially Designed Glare Free Round Shape 360 Deg / 3 Unit. Focussing Area/Led Will Be Kept 90 Deg Perpendicular Below The Glare Free Optic. Size Of The Led Optic & Glare Unit Must Be Equal Or +/-2% Higher To Achieve The Maximum Intensity And Less Glare. This Additional Arrangement Can Be Fixed Or Removed On The Application. Glare Free Optical Design For Human Viewing Angle From A Distance Within 2-3 Mtr. Toughened Transparent Glass Having The Ik Protection Up To Ik05 Sealed Above The Glare Free Unit. Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik05, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. 228 Sitc Of High Quality Long Through Multi Color Wash Light, Protection Rating : Ip66, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Surface Mount Yoke Arrangements For Fixing The Lights Having The Rotation Degrees Embosed In The Die Cast. Power Consumption : 100W, Cct : Rgbw(6000-7000K), (As Per The Design Approval), Optics : Pmma With Holder, Beam Angle : 25º/45º/60º, Control : Dmx512 Channel : 4 Ch, Body : Die Casted / Extruded Aluminium With Embossed Manufacturer Logo, Seperate Compartment For Keeping The Decoder/Driver In The Housing Which Can Be Easily Removable For Service Without Disturbing The Leds/Optics, Hot Spot And Light Distribution : Optics Designed To Minimize Hot Spots & Fringing In Color Mixing Applications. Power Input : Constant Dc 24V With External Driver To The Constant Current Decoder, Surge Protection : Inbuilt Surge Protection In The Driver 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Toughened Transparent Glass Having The Ik Protection Up To Ik08, Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C, The Light Fixtures Are Having Ip68 Air Vent Made Of Stainless Steel Which Helps To Desiccate & Prevent From Forming Moisture Inside The Light Fixture At Worst Environmental Condition. Led Life Should Be At Least 50,000 Burning Hours At L70 At 35 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Pcb Thickness Must Be 1.6Mm, 35 Micron Copper, 2W Tc With Black Or White Masking, Copper /Osp Finish. Lm79, Ik07, Ip66, Hv Certificates From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Ip67 Connector Having The Length >300Mm. 229 Sitc Of High Quality Multi Color Linear Profile Light, Protection Rating : Ip65, Complying To Bis Standard \Is 10322 (Part 5/Sec 1): 2012\ And Having Ce Certification Against Standard \Low Voltage Directive & Protective Equipment - En 60598-1:2015\, And \Electromagnetic Compatibility Directive - En 61547: 2009\, Mounting Structure : Adjustable Wall Mount Ss Clips For Fixing The Lights. Power Consumption : 15W, Dimension :23Mm, Cct : Rgbw, (As Per The Design Approval) Beam Angle : 120º, Control : Dmx512 Channel : 4 Ch, Body : Extruded Aluminium With Milkwhite Diffuser, Power Input : Dc 24V With External Driver, Surge Protection : Inbuilt Surge Protection 2Kv-4Kv(Additional If Required Will Be Added As Per The Requirement), Painting : Chemical 3/7 Tank Processed Treatment Before The Powder Coat Black/Ash/Approved Color Coat. Fixture Will Be Suitable To Operate In A Temperature Range Of 0°C To 50°C , Led Life Time Should Be At Least 50,000 Burning Hours At L70 At 25 Degree Centigrade. Luminaire Is Inclusive Of Integral Male/Female Waterproof Connectors With Structures In Pre Wired Conditions As Per Is Standard. Lm79, Ip65, From Nabl Acrediated Laboratory. Led Makes Should Be Cree, Lumilled, Osram, Seoul, Epistar, Nichia Or Equivalent With The Engineer Or 3Rd Party Testing Laboratory Approval. Power & Dmx Loop In/Out Along With Connector Having The Length >100Mm. 230 Sitc Of Gi Cage For Light Protection, Gi Cage Made Of Mesh With Back Openable Door And Suitable Hinges, Light Fixing Provision With Bolting Option, Base Concrete Foundation. 231 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 232 4C X 16 Sq.Mm 233 Sitc Of Factory Fabricated And Wired Metal Clad Dust And Vermin Proof Floor Mounting Panel Tpn Switchboard Complete. The Instrument Chamber Shall Be Separate And Shall Comprise A Multifunction Meter And Current Transformer Etc. The Board Shall Have Suitable Capacity Electrolytic Aluminum Bus Bars As Per Is:8623 Insulated With Heat Shrink Sleeving And Mounted On Non-Hygroscopic Supports Such As Cmc /Dmc Supports With Detachable Side Covers And Shall Be Suitable For An Extension On The Sides. The Switches Shall Be Complete With Cable And Boxes, Pedestal-Type Cable Socket Compression Glands And Indicating Lamps On Incoming Etc. The Power Panel Shall Be Fabricated With Crca Sheet With A Minimum Thickness Of 1.6Mm/2Mm With The Following Incoming And Outgoings Incoming Mccb-150Amp Tpn-01 Multifunction Meter-01 Ryb Indicators-01Set, Outgoing 63 Amp Tpn Mcb- 04 No, 10Amp Sp Mcb - 6Nos. 234 Sitc Of Sub Power Distribution Board Made Up Of Ms Sheet Metal Fabricated Housing Black Powder Coated And Ivery Connectors For The Internal Terminations And External Outgoing Connecting Points, Fibre / Brass Glands Of Suitable Size Fitted Mcb Control For Outgoing Circuits. Timer With Required Contactor For Auto Switching. Power Panel Suitable For Indoor/Outdoor Applicable And Floor Mount / Wall Mount Options.- 22 Nos Of 6/10A Sp Outgoing McbS. - 1No Of 63A Tpn Incoming Mcb. 235 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Of 2.7 Metre Long Etc. (But Without Charcoal/ Coke And Salt) As Required. 236 Sitc Of Din Rail Mount Dmx Controller Can Be Used To Control A Wide Variety Of Different Dmx Systems- From Rgb/Rgbw To More Advanced Moving And Color Mixing Luminaires, Dmx Audio Players And Fountains. The Controller Comes With A Variety Of Features, Iphone/Ipad/Android Remote Control, Wi-Fi Facilities, Dry Contact Port Triggering And Flash Memory. Usb Connection • 2048 Dmx Channels Universe In Live Mode (Computer) • 8 Dry Contact Trigger Ports Via He10 Connector • Stand Alone Mode With 5 Area And 90+ Scenes, Mac Osx 10.6/10.7/10.8 - Windows Xp/Vista/Seven/8 32/64 Bits And Usb 2.0, Xlr3, Mini Usb, 1 He10, Power From 5V To 5.5V Dc (Ac/Dc Adapter In Option. 237 Supplying And Drawing Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In The Existing Surface/Recessed Steel/ Pvc Conduit As Required 238 3C X 1.5 Sq.Mm 239 Supplying And Making End Termination With Brass Compression Gland And Aluminium Lugs For Following Size Of Pvc Insulated And Pvc Sheathed / Xlpe Aluminium Conductor Cable Of 1.1 Kv Grade As Required. 240 4C X 16 Sq.Mm 241 Earthing With G.I. Earth Plate 600 Mm X 600 Mm X 6 Mm Thick Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Lockingarrangement And Watering Pipe Of 2.7 Metre Long Etc. (But Without Charcoal/Coke And Salt) As Required 242 Sitc Of Programming Charges 243 Supply, Installation, Testing & Commissioning Of - Double Arm7000Mm Pole Made Of Circular Mild Steel Pipe Of Two Section (Grade Yst 210), Bottom Section 139.7Mm Dia X 3.6Mm Thick With 1607Mm Height & Top Section 114.3Mm Dia X 3.2Mm Thick With 1858Mm Height. Decorative Base Made Of Gravity Die-Cast Aluminium (504Mm Dia X 1324Mm Height). Decorative Die Cast Aluminium Cone (230Mm Dia X 150Mm Height) Covered On The Both Section Joint Area. The Double Arm Pelican Orna Eva Bracket Is A Split Constructed Type, Bracket Stem Made Of Ms Pipe 60.3Mm Dia X 2.6Mm Thick, Emerging From A Split Collar Upto A Height 1379Mm Crowned At The Top With A Decorative Eva Made Of Gravity Die Cast Aluminium In Single Piece Of 682Mm Height. The Artistically Curved Double Arm Made Of Ms Pipe 38.1Mm X 2Mm Thick, Spruced Up With Ms Scroll With Gravity Die Cast Aluminium Leaf And Ms Floral Embellishment, Is Firmly Held To The Stem By Way Of Cast Iron Clamps And The Arm Bears Cast Iron Knobs At One End And Other End Facilitates The Fitment Of Pendant Luminaire At 890Mm On Either Sides From The Vertical Axis Of The Bracket Stem. Pole Section Welded By Certified Welders Using High End Mig Welding Processes. Pdc Aluminium Service Door 348Mm Height X 110Mm Width Shall Be Provided With The Company Logo Embossed On The Bottom Of The Door And Safety Rope. The Control Gear Tray Is Prewired With 2.5 Sq.Mm Cable, 6A Sp Mcb And 32A Ramanuj Stud Type 4 Way Terminal Block For Loop-In / Loop-Out Arrangement, 5A 2 Way Terminal Connector And Provision For Earthing. Any Other Internal Cables And Connections Shall Not Be Covered In The Scope Of Supply. Mild Steel Mounting Plate 300Mm Square X 16Mm Thick Steel Of Grade E250 To Is 2062 : 2011 With 4 Elongated Holes 48 X 24 To Suit M20 X 500Mm Bolts Of Grade 4.6 At Cc 215. The Base Plate Have A Cable Entry Hole As Per The Base Pipe Size. This Mounting Steel Plate Along With Foundation Bolts Of Suitable Size To Be Used For Ensuring Firm Grouting Into The Specially Designed Foundation. All Dimension Are Within +/- 5% Tolerance. The Pole Is Coated With Zinc Rich Primer & Pure Polyester Powder Coating Or Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint (Coating Thickness 60- 80 Microns). The Pole Shall Be Provided With Graphite Grey / Anthracite Grey / Black As Standard Colour Options. 244 Supply, Installation, Testing & Commissioning Of Input Power : 90W Ledtechnical Description Pendant Mounted Compact Street Light. Type Iv (Asymmetrical Light Distribution). Luminaire Made Of Specially Contoured Spun Aluminium Body Of High Corrosion Resistance With A Neck Design For Unique And Better Aesthetics And Non Corrosive Stainless Steel Fasteners. Clear Acrylic / Clear Polycarbonate Diffuser. The Luminaire Have Extruded Aluminium Heatsink For Thermal Management With Vertical Fin Design For Longer Life Of The Leds. The Mounting Arrangement Nipple, Coupling & Hex Nut Made Of Stainless Steel 304 Suitable For Mounting To Internally Threaded Pipe Of Designation M30. Protection Class Ip65. Mechanical Resistance Ik05 (Acrylic Diffuser) & Ik09 (Polycarbonate Diffuser). Pure Polyester Powder Coated Graphite Grey / Anthracite Grey / Jet Black. Available Colour Temperature 3000K / 4000K / 5700K, Colour Rendering Index (Cri)>70. K-Lite Led Module With Expected Service Life Of At Least 72,000 Operating Hours. Prewired With Led Driver And Suitable For Operating On 240V, 50Hz Single Phase Ac Supply. Driver Efficiency >85%, Power Factor >0.95, Thd 245 Supply, Installation, Testing & Commissioning Of - Single Arm7000Mm Pole Made Of Circular Mild Steel Pipe Of Two Section (Grade Yst 210), Bottom Section 139.7Mm Dia X 3.6Mm Thick With 1607Mm Height & Top Section 114.3Mm Dia X 3.2Mm Thick With 1858Mm Height. Decorative Base Made Of Gravity Die-Cast Aluminium (504Mm Dia X 1324Mm Height). Decorative Die Cast Aluminium Cone (230Mm Dia X 150Mm Height) Covered On The Both Section Joint Area. The Single Arm Pelican Orna Eva Bracket Is A Split Constructed Type, Bracket Stem Made Of Ms Pipe 60.3Mm Dia X2.6Mm Thick, Emerging From A Split Collar Upto A Height 1379Mm Crowned At The Top With A Decorative Eva Made Of Gravity Die Cast Aluminium In Single Piece Of 682Mm Height. The Artistically Curved Single Arm Made Of Ms Pipe 38.1Mm X 2Mm Thick, Spruced Up With Ms Scroll With Gravity Die Cast Aluminium Leaf And Ms Floral Embellishment, Is Firmly Held To The Stem By Way Of Cast Iron Clamps And The Arm Bears Cast Iron Knobs At One End And Other End Facilitates The Fitment Of Pendant Luminaire At 890Mm From The Vertical Axis Of The Bracket Stem. Pole Section Welded By Certified Welders Using High End Mig Welding Processes. Pdc Aluminium Service Door 348Mm Height X 110Mm Width Shall Be Provided With The Company Logo Embossed On The Bottom Of The Door And Safety Rope. The Control Gear Tray Is Prewired With 2.5 Sq.Mm Cable, 6A Sp Mcb And 32A Ramanuj Stud Type 4 Way Terminal Block For Loop-In / Loop-Out Arrangement, 5A 2 Way Terminal Connector And Provision For Earthing. Any Other Internal Cables And Connections Shall Not Be Covered In The Scope Of Supply. Mild Steel Mounting Plate 300Mm Square X 16Mm Thick Steel Of Grade E250 To Is 2062 : 2011 With 4 Elongated Holes 48 X 24 To Suit M20 X 500Mm Bolts Of Grade 4.6 At Cc 215. The Base Plate Have A Cable Entry Hole As Per The Base Pipe Size. This Mounting Steel Plate Along With Foundation Bolts Of Suitable Size To Be Used For Ensuring Firm Grouting Into The Specially Designed Foundation. All Dimension Are Within +/- 5% Tolerance. The Pole Is Coated With Zinc Rich Primer & Pure Polyester Powder Coating Or Epoxy Zinc Phosphate Primer And Finished Using Environmentally Stable Polyurethane Based Paint (Coating Thickness 60-80 Microns). The Pole Shall Be Provided With Graphite Grey / Anthracite Grey / Black As Standard Colour Options. 246 Supply & Installation Of 3Phase ,15Kva Outdoor Type Ccms Panel Equipped With 1 No Street Light Controller, 1 No Energy Meter,1 No Tpn Mcb, 3 Nos 3 Pole Contactors, 3 Nos 1Pole Mcb’S, Battery, Smps, 3 Nos Current Transformers & Toggle Switches 247 Supplying And Fixing Of Sheet Steel Enclosure On Surface/Recessalong With 25Amps,Double Pole ,240V,10Ka, C Curve Mcb Complete With Connections Testing & Commissioning As Required 248 Supply Of 2C X 4Sqmm Copper Armoured Cable 249 Laying Of 2Cx4Sqmm Copper Armoured Cable 250 Aluminium Armoured Cable 251 4 X 16 Sq. Mm Aluminium Armoured Cable 252 Providing And Fixing 6 Swg Dia G.I. Wire On Surface Or In Recess For Loop Earthing As Required. 253 Providing, Laying And 80 Mm Dia G.I. Pipe (Medium Class) In Ground Complete With G.I. Fittings Including Trenching (75 Cm Deep)And Re-Filling Etc As Required. Dsr No 254 Supply & ;Laying Of 63Mm Dia Dwc Hdpe Pipe Isis Marked Along With All Accessories Like Socket,Bend,Couplers Etc.Conorming To Is 14930 Part Ii Complete With Fitting And Cutting ,Joining,Etc.Direct In Gorund (75Cm Below Ground Leve;) Inclsuing Excavation And Refilling The Trench But Excluding Sand Cushioning And Protective Covering Etc,Complete As Required. 255 Supplying And Making End Termination With Brass Compression Gland And Aluminum Lugs For Following Size Armoured Aluminum Conductor Power Cable Of 1.1 Kv Grade As Per Specification. . 256 4 X 10 Sq. Mm (25 Mm) 257 4 X 16 Sq. Mm (28 Mm) 258 Supplying And Making Straight Through Joint With Heat Shrinkable Joint Kit Including Aluminium Ferrules For Following Size Of Frls Pvc Insulated And Pvc Sheathed / Xlpe Aluminum Conductor Cable Of 1.1 Kv Grade As Per Specification. . 259 4 X 16 Sq. Mm 260 Mdb -1 ( Near Ccr Building ) 261 Sitc Of Wall/Free Standing Floor Mounted Dust And Vermin Proof Compartmentalised Cubical Panel For Electrical Works, Made Out Of Crca Sheet. Other Parameters Required As Per Point (A) Thickness Of Sheet Shall Not Be Less Than 1.6 Mm Up To 600 Mm Length/Width Of Any Compartment And Be Of 2.0 Mm Above 600 Mm. Load Bearing Structure Shall Be Of 2.0 Mm Thick Sheet Supported By Base M.S. Channel If Required. Side Walls And Cable Alley Compartment Shaving Bolted Type Doors With/Without Detachable Extension Type Structure (B) Panel Shall Be Duly Treated For Derusting In 7 Tank Process With De Phosphating And With Powder Coating Of Minimum 70 Microns On Both Side Of Panel In Desired Shade The Panel Having Pu/ Neoprene Rubber Gasket Of Not Less Than 3Mm Thickness, Required Hardware, Separate Detachable Gland Plate M.S. Base Channel (Min 75Mm), Hinged Door With Locking Arrangement For Equipment/Switchgear (C) Interconnection Between Bus Bar And Switch Gears/Cable Shall Be Rigidly Supported And Made Out By Flexible Copper Wires (Upto 125 Amp) And By Solid Bus Bar(>125 Amp). 262 Incomer 263 4P Mccb, 200A As Out Going 36Ka 264 Metering & Indication 265 1 Set Of Phase Indicating Lamps (Red/Yellow/Blue) 266 200/5A Ct 267 0-200 Amps Ammeter Analog 268 0-500 Amps Voltmter Analog 269 Selector Switch For Voltmeter 270 Selector Switch For Ammeter 271 Bus-Bar 272 1 Set Of 200A 4P Aluminium Bus Bar With Colour Coded Pvc Sleeves (4X800Mm)

BRR:9910063 Bids Are Invited For Custom Bid For Services - Hiring Of Third-Party Inspection Agency Manpower Outsourcing Services - Man-Days Based

BRR:9909908 Bids Are Invited For Hiring Of Third-Party Inspection Agency - Professional Services, Msme Unit; Cmegp Beneficieries Unit; Government Test Agency

BRR:9909615 Bids Are Invited For Hiring Of Third-Party Inspection Agency - Please Refer Tender Document Sow & Scc; Please Refer Tender Document Sow & Scc; Please Refer Tender Document Sow & Scc

BRR:9908451 Bids Are Invited For Assets Insurance Service - Mega Risk Policy For All Hydro Power Stations Of Nhpc; Mega Cover That Is Fire; Optional , Assets Insurance Service - Mega Risk Policy For All Hydro Power Stations Of Nhpc; Earthquake; Optional , Assets Insurance Service - Mega Risk Policy For All Hydro Power Stations Of Nhpc; Mbd (Machinery Breakdown) Cover; Optional , Assets Insurance Service - Mega Risk Policy For All Hydro Power Stations Of Nhpc; Business Interruption That Is 12 Months For Parbati-Ii And Subansiri And 18 Months For Other 20 Power Station; Optional , Assets Insurance Service - Terrorism Cover For All Hydro Power Stations Of Nhpc; Terrorism Cover That Is Md Plus Bi That Is Bi For 12 Months For Parbati Ii And Subansiri And 18 Months For Other 20 Power Station; Optional , Assets Insurance Service - Third Party Liability For All Hydro Power Stations Of Nhpc; Third Party Liability Cover For Property Damage (Aoa:Aoy); Optional , Assets Insurance Service - Third Party Liability For All Hydro Power Stations Of Nhpc; Third Party Liability Cover For Bodily Injury/Loss Of Life (Aoa:Aoy); Optional

BRR:9904913 Empanelling Agencies for conducting Third Party Inspection for procurement of Pipes, Specials, other Materials, Pumpsets and Equipments required for implementing in Water Supply Schemes and Sewerage Schemes to ensure Quality Assurance under fixed rate contract methodology for Vellore Region (Contract Period upto 31.12.2026)

BRR:9899772 Bids Are Invited For Hiring Of Third-Party Inspection Agency - Oil And Gas; T4s Audit Of Hpcl Yediyur Lpg Plant; Pngrb , Hiring Of Third- Party Inspection Agency - Oil And Gas; T4s Audit Of Hpcl Mysore Lpg Plant; Pngrb

BRR:9893894 Bids Are Invited For Hiring Of Third-Party Inspection Agency - Oil And Gas; For Inspection And Supervision Of Coat And Wrap Refurbishment Work At Various Sites Of Gujarat & Rajasthan Sector Of Wrpl; As Per Tender

BRR:9893782 Bids Are Invited For Custom Bid For Services - Third Party Stack Emission Monitoring

BRR:9889982 STANDARD FIRE, SPECIAL PERILS, LIFT (THIRD PARTY) LIABILITY PUBLIC LIABILITY, BURGLARY AND HOUSEBREAKING INSURANCE AND FIDELITY GUARANTEE AND MACHINERY BREAK DOWN,ELECTRONIC EQUIPMENT, PLATE GLASS, SPECIAL CONTINGENCY ALL RISK AND LED SIGNAGE POLICIES FOR IT PARK (SEZ); 1 Policy 2 Standard Fire and Special Perils Insurance Policy (including All Add on covers as per tender document) 3 Burglary and Housebreaking Policy 4 Machinary Breakdown 5 Electronic Equipment 6 Plate glass 7 Special Contingency All Risk 8 LED Signage 9 Lift (Third-Party) Liability Insurance Policy 10 Fidelity Guarantee Policy 11 Public Liability Insurance Policy 12 Premimum working 13 Property Value including Plinth and Foundation including stores stock but excluding Escalation. Premium including Fire, STFI, EQ & Terrorism with all Add on covers as per the tender 14 Debris Removal Premium including Fire, STFI, EQ & Terrorism 15 Loss of Rent (3 months) 16 Escalation 10% 17 Add on covers as per tender document 18 Final Premium 19 Fire rate including STFI 20 Occupancy should be Software park under Section 21 Risk code 22 Rate code as per erstwhile AIFT 23 Deduct STFI rate 24 Net Fire rate 25 Applicable discount 26 Fire Rate after discount 27 STFI Rate 28 EQ Rate 29 Terrorism Rate 30 Total applicable Rate

BRR:9919117 Tender for Empanelment Of Consultant For Survey, Preparing detail project report And Providind Consultancy Survices For Different Civil Works At Different Places Under Municipal Council Sehore Fy2026-27

BRR:9910236 Bids Are Invited For Hiring Of Consultants - Milestone/Deliverable Based - Subject Matter Experts, Procurement Management Consultant, Management Consultants; Dpr,Rfp Preparation & Bid Process Management, Procurement / E Procurement Management, Public Procurement/ E-Procu..

BRR:9909541 Bids Are Invited For Hiring Of Consultancy Services - Percentage Based - Technology Consultants, Management Consultants; Project Management, Engineering Design, Contract Management, Building And Construction; No; Hybrid(As Specified In Scope Of Work)

BRR:9901817 Request For Proposal From Agencies Eligible Under Gfr133(3) And 192 To 194 For Providing Project Management Consultancy Services For Construction Of Infrastructure For Overhauling Of T-Series Tanks At Vfj, Jbp On Deposit Mode Of Work Execution Basis

BRR:9896181 Tender for Project Management Consultancy (Pmc) (Right From Planning, Scheduling, Initial Level Survey Checking, Execution, Quality Control Assurance And Completion Up To Bill Submission Services For (Earthen Road) Formation Of 124 Nos Of New Bt, cement concrete & Ilp Roads In Zone-1, 3, 7, 11, 14 & 15. (Tentative Project Cost Of Rs. 17.00 Crores) (Including Gst)

BRR:9894721 Tender for Expression Of Interest For Consultancy Services For Examine The Possibilities For Construction Of 12.00 Mld Canal Based Water Treatment Plant(Wtp) Instead Of 6.00 Mld Wtp (As Per Decision Of The Competent Authority) In Hansi, Sector-3, Hansi.(Haryana) And Preparation Of Detailed Estimate-Cum-Detailed Project Report For 12.00 Mld Water Treatment Plant (Wtp) Including Transformer, Dg Set,Electrical, Mechanical Instrumentation Work Complete In All Respects In Sector-3, For Sector 3,5,6 P-1, P-11 Etc At Hansi Complete In All Respect And All Other Works Contingent Thereto

BRR:9893686 Bids Are Invited For Custom Bid For Services - Consultancy Services For Preparation Of Design Vetting Of Dpr For Sewage Treatment Facility Including Planning Topo Survey Hydraulic Design Preparation Of Master Plan Architectural Structural Drg For Stp At Belgavi Militar..

BRR:9893345 Tender For Construction Of Administrative Block And Quarter Master Store Building At 11Th Bn Itbp, Pengong, North Sikkim. Sh Consultancy Services For Preparation Of Dpr Of 11Th Bn Itbp Force, Pegong, North Sikkim.