BRR:9706611 Bids Are Invited For Facility Management Services - Lumpsum Based - Mega Contract For Operation And Maintenance Of Ash Handling Plant Stage 1 At Ntpc-Solapur; O&M Of Mechanical Work; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost)

BRR:9703293 Bids Are Invited For Custom Bid For Services - Modification Work For Erection & Fabrication Of Additional Pressure Conveying System In Esp Hopper For Ahp, Rtps-Dvc

BRR:9692664 Bids Are Invited For 100267726 Procurement Of 3Inch Equalizing Valves For Daes For Stage-2 Ash Handling System, Ntpc Vind Total Quantity : 18

BRR:9692332 Bids Are Invited For Custom Bid For Services - Biennial Service Contract For Schneider Electric India Pvt Ltd Make Plc System Of Coal Handling Plant Ash Handling Plant Fire Water Pump House Of Dstps Damodar Valley Corporation

BRR:9687191 Work Contract For Round The Clock Complete Operation And Maintenance Of Ash Handling System Of Unit 1 To 4 (4 X 210 Mw) Of Ph-I And Ph-Ii At Sgtps, Mppgcl, Birsinghpur

BRR:9686161 Tender For Supply Of Bags For Vent Filter Assembly Of Silo And Bag Filter Assembly Ofbuffer Hopper For Ash Handling System Of 210Mw,Atps, Mppgcl, Chachai. - Bags for vent filter assembly of silo of DryAsh handling SystemTotal length-3050 mmCollar dia- 172.00 mmBag dia-152.00 mmFiber-100% polysterType Snap Type, made of spring steelContinuous operating -140°C temperatureMaximum temperature- 150°CWeight -550 (± 7.5%)g/m2 Thickness- 2 (± 10%) mmAir permeability-150 (± 10%)LTS/DM2/MIN at 20 mm W.G. Bags should be silicon coated having egg finished Fabric should be free from pin holes. 2 BAG FILTER ASSEMBLY ofBuffer HopperTotal length - 2500 mmCollar dia- 172.00 mmBag dia - 152.00 mmFiber - Nomex stainless steelContinuous operating temperature - 140°CMaximum temperature- 200°CDensity- 1.38g/Cm3 Tenacity - 33CN/ TEX Weight - 550 (± 7.5%)g/m3Thickness- 2 (± 10%) mmAir permeability-150 (± 10%)LTS/DM2/MIN at 20 mm W.G

BRR:9681679 Bids Are Invited For Custom Bid For Services - Painting Of Adl And Awrc Pipes And Structures In Ash Handling System At Ntpc Simhadri

BRR:9703637 Bids Are invited for Beacon Orange , Clutch Booster , Control Valve , Condensate Sump , Feed Pump Total Quantity : 8

BRR:9701817 Bids Are invited for Beacon Orange , Clutch Booster , Control Valve , Condensate Sump , Feed Pump Total Quantity : 8

BRR:9700702 Tender for Nctps - I - Se/Mi Circle - Aoh (25-26) - Bm Dn. - Unit Iii - Esp Bottom Hopper - Reconditioning Of Damaged / Eroded Portion Of Esp Bottom Hopper Patch Up And Strengthening Works During Annual Overhaul For The Year 2025-26

BRR:9693578 Bids Are Invited For Fluidising Pad Element For Air Lock Tank Of Fae Tower, Small Round, Size-95 Mm, Thickness-25Mm Thick , Fluidising Tiles For Esp Hopper, Square Straight Edge, Size: 300Mm X 300Mm, Thickness: 25Mm Thick, T Total Quantity : 344

BRR:9682114 Bids Are Invited For Flushing Apparatus-100265416_ M5660090100 Total Quantity : 12

BRR:9702245 Bids Are Invited For Nozzle For Air Washer Plant Made Of Brass With Bright Chrome Polish. As Per Attached Drawing In Anne Total Quantity : 500

BRR:9697967 Supply Of Manual Hydraulic Pressure Testingmanual Hydraulic Pressure Testing,Manual Hydraulic Pressure Testing Machine For Testing Pressure Of Fire Extinguishers And Air Receiver With Technical Specification:- Capacity- 70Kg/Sq.Cm, Fitted With Triple Wire Braided Hydraulic Hose Of Length 15Ft. Working Pressure - 100Kg/Sq.Cm. And End Connections At Both Ends To Suit 5Kg And 6Kg, 9Kg Capacity Dcp Type Fire Extinguisher Exit Point, Along With Pressure Gauge Of Range 0-100Kg/Sq.Cm. And Grad Uation 1/2(Half) Kg Per Sq.Cm. Calibration Certificate Of Pressure Gauge Is To Be Supplied. Make-Safety Plus/I Nder/Ona. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9697787 Supply Of Kit Of Fastenerskit Of Fasteners,Kit Of Fasteners & Spring Washer For Air Brake Equipments Consisting Of 15 Items Treated As One Set. (Details As Per Annexure Attached). Specification For Stud Is: 1 862; 1975, Type: A (For All Four Studs) And Pitch For Studs M10 X 50- 1.50, M12 X 30- 1.75 & M12 X 40- 1.75 And M16 X 45- 2.00. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9682868 Tender for 1 Supply of Seamless Carbon steel pipes As per ASTM A 106 Gr B, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50 NB, Schedule 40 2 Supply of Seamless Carbon steel pipes As per ASTM A 106 Gr B, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65 NB, Schedule 40 3 SUPPLY OF SEAMLESS BUTT WELDED ENDS 90 DEG ELBOW AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, LONG RADIUS 1.5D, COMPLYING TO SPECIFICATIONS IN Section 2 of size 15 NB, Schedule 40, 150 CLASS 4 SUPPLY OF SEAMLESS BUTT WELDED ENDS 90 DEG ELBOW AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, LONG RADIUS 1.5D, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25 NB, Schedule 40, 150 CLASS 5 SUPPLY OF SEAMLESS BUTT WELDED ENDS 90 DEG ELBOW AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, LONG RADIUS 1.5D, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50 NB, Schedule 40, 150 CLASS 6 SUPPLY OF SEAMLESS BUTT WELDED ENDS 90 DEG ELBOW AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, LONG RADIUS 1.5D, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65 NB, Schedule 40, 150 CLASS 7 SUPPLY OF SEAMLESS BUTT WELDED ENDS EQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 15 NB, Schedule 40, 150 CLASS 8 SUPPLY OF SEAMLESS BUTT WELDED ENDS EQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25 NB, Schedule 40, 150 CLASS 9 SUPPLY OF SEAMLESS BUTT WELDED ENDS EQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50 NB, Schedule 40, 150 CLASS 10 SUPPLY OF SEAMLESS BUTT WELDED ENDS EQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65 NB, Schedule 40, 150 CLASS 11 SUPPLY OF SEAMLESS BUTT WELDED ENDS UNEQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25X25X15 NB, Schedule 40, 150 CLASS 12 SUPPLY OF SEAMLESS BUTT WELDED ENDS UNEQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50X50X25 NB, Schedule 40, 150 CLASS 13 SUPPLY OF SEAMLESS BUTT WELDED ENDS UNEQUAL TEE AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65X65X50 NB, Schedule 40, 150 CLASS 14 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25X15 NB, Schedule 40, 150 CLASS 15 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50X15 NB, Schedule 40, 150 CLASS 16 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50X25 NB, Schedule 40, 150 CLASS 17 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65X50 NB, Schedule 40, 150 CLASS 18 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 80X65 NB, Schedule 40, 150 CLASS 19 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 80X50 NB, Schedule 40, 150 CLASS 20 SUPPLY OF SEAMLESS BUTT WELDED ENDS CONCENTRIC REDUCER AS PER ANSI B 16.9, MOC CARBON STEEL-CS, ASTM A 234 Gr WPB-SEAMLESS, COMPLYING TO SPECIFICATIONS IN Section 2 of size 100X65 NB, Schedule 40, 150 CLASS 21 SUPPLY OF Seamless BUTT WELDED pipe nipple One End Threaded-OET 100 mm long as per ASTM A403, COMPLYING TO SPECIFICATIONS IN Section 2 of size 15NBX0.5 INCH NPT Schedule 40, 150 CLASS 22 SUPPLY OF Seamless BUTT WELDED pipe nipple One End Threaded-OET 100 mm long as per ASTM A403, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25NBX1 INCH NPT Schedule 40, 150 CLASS 23 SUPPLY OF Seamless BUTT WELDED pipe nipple BOTH End Threaded-BET 100 mm long as per ASTM A403, COMPLYING TO SPECIFICATIONS IN Section 2 of size 15NBX0.5 INCH NPT Schedule 40, 150 CLASS 24 SUPPLY OF Seamless BUTT WELDED pipe nipple BOTH End Threaded-BET 100 mm long as per ASTM A403, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25NBX1 INCH NPT Schedule 40, 150 CLASS 25 SUPPLY OF CARBON STEEL-CS FORGED FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 15 NB, Schedule 40, 150 CLASS 26 SUPPLY OF CARBON STEEL-CS FORGED FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25 NB, Schedule 40, 150 CLASS 27 SUPPLY OF CARBON STEEL-CS FORGED FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50 NB, Schedule 40, 150 CLASS 28 SUPPLY OF CARBON STEEL-CS FORGED FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65 NB, Schedule 40, 150 CLASS 29 SUPPLY OF CARBON STEEL-CS FORGED FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 80 NB, Schedule 40, 150 CLASS 30 SUPPLY OF CARBON STEEL-CS FORGED FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 100 NB, Schedule 40, 150 CLASS 31 SUPPLY OF CARBON STEEL-CS FORGED BLIND FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 15 NB, Schedule 40, 150 CLASS 32 SUPPLY OF CARBON STEEL-CS FORGED BLIND FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 25 NB, Schedule 40, 150 CLASS 33 SUPPLY OF CARBON STEEL-CS FORGED BLIND FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 50 NB, Schedule 40, 150 CLASS 34 SUPPLY OF CARBON STEEL-CS FORGED BLIND FLANGES AS PER ASTM A105, DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH, COMPLYING TO SPECIFICATIONS IN Section 2 of size 65 NB, Schedule 40, 150 CLASS 35 SUPPLY OF 15 NB MANUAL BALL VALVES, COMPLYING TO SPECIFICATIONS IN Section 2 36 SUPPLY OF 25 NB MANUAL BALL VALVES, COMPLYING TO SPECIFICATIONS IN Section 2 37 SUPPLY OF 50 NB MANUAL BALL VALVES, COMPLYING TO SPECIFICATIONS IN Section 2 38 SUPPLY OF 65 NB MANUAL BALL VALVES, COMPLYING TO SPECIFICATIONS IN Section 2 39 SUPPLY OF SAFETY RELIEF VALVES-SRV with inlet end of 25 NB flanged connection, COMPLYING TO SPECIFICATIONS IN Section 2 40 SUPPLY OF AUTO DRAIN VALVES-ADV, with inlet end of 25 NB flanged connection, COMPLYING TO SPECIFICATIONS IN Section 2 41 SUPPLY OF PRESSURE FILTERS ASSEMBLY WITH FILTER ELEMENTS OF 15 MICRONS with 50 NB flanged ends complying with DIMENSIONAL STANDARD ANSI B 16.5, SORF, RF, 150 CLASS, CON.SERR. FINISH., COMPLYING TO SPECIFICATIONS IN Section 2 42 SUPPLY OF PRESSURE GUAGES COMPLYING TO SPECIFICATIONS IN Section 2 43 SUPPLY OF Carbon Steel electro galvanized fully threaded studs with two numbers of hexagonal nuts and two numbers of washers - one set consists of 1 no of stud and 2 nos. of nuts and 2 nos. of washers FOR 15 NB COMPLYING TO SPECIFICATIONS IN Section 2 44 SUPPLY OF Carbon Steel electro galvanized fully threaded studs with two numbers of hexagonal nuts and two numbers of washers - one set consists of 1 no of stud and 2 nos. of nuts and 2 nos. of washers FOR 25 NB COMPLYING TO SPECIFICATIONS IN Section 2 45 SUPPLY OF Carbon Steel electro galvanized fully threaded studs with two numbers of hexagonal nuts and two numbers of washers - one set consists of 1 no of stud and 2 nos. of nuts and 2 nos. of washers FOR 50 NB COMPLYING TO SPECIFICATIONS IN Section 2 46 SUPPLY OF Carbon Steel electro galvanized fully threaded studs with two numbers of hexagonal nuts and two numbers of washers - one set consists of 1 no of stud and 2 nos. of nuts and 2 nos. of washers FOR 65 NB COMPLYING TO SPECIFICATIONS IN Section 2 47 SUPPLY OF Carbon Steel electro galvanized fully threaded studs with two numbers of hexagonal nuts and two numbers of washers - one set consists of 1 no of stud and 2 nos. of nuts and 2 nos. of washers FOR 80 NB COMPLYING TO SPECIFICATIONS IN Section 2 48 SUPPLY OF Carbon Steel electro galvanized fully threaded studs with two numbers of hexagonal nuts and two numbers of washers - one set consists of 1 no of stud and 2 nos. of nuts and 2 nos. of washers FOR 100 NB COMPLYING TO SPECIFICATIONS IN Section 2 49 Supply of Compressed Asbestos Fiber gasket for SORF flanges as per ANSI B 16.5 FOR 15 NB COMPLYING TO SPECIFICATIONS IN Section 2 50 Supply of Compressed Asbestos Fiber gasket for SORF flanges as per ANSI B 16.5 FOR 25 NB COMPLYING TO SPECIFICATIONS IN Section 2 51 Supply of Compressed Asbestos Fiber gasket for SORF flanges as per ANSI B 16.5 FOR 50 NB COMPLYING TO SPECIFICATIONS IN Section 2 52 Supply of Compressed Asbestos Fiber gasket for SORF flanges as per ANSI B 16.5 FOR 65 NB COMPLYING TO SPECIFICATIONS IN Section 2 53 Supply of Compressed Asbestos Fiber gasket for SORF flanges as per ANSI B 16.5 FOR 80 NB COMPLYING TO SPECIFICATIONS IN Section 2 54 Supply of Compressed Asbestos Fiber gasket for SORF flanges as per ANSI B 16.5 FOR 500 NB COMPLYING TO SPECIFICATIONS IN Section 2 55 Supply of Electro Galvanized U Clamps with 2 nuts, 2 lock nuts and 2 washers COMPLYING TO SPECIFICATIONS IN Section 2 FOR 15 NB PIPE 56 Supply of Electro Galvanized U Clamps with 2 nuts, 2 lock nuts and 2 washers COMPLYING TO SPECIFICATIONS IN Section 2 FOR 25 NB PIPE 57 Supply of Electro Galvanized U Clamps with 2 nuts, 2 lock nuts and 2 washers COMPLYING TO SPECIFICATIONS IN Section 2 FOR 50 NB PIPE 58 Supply of Electro Galvanized U Clamps with 2 nuts, 2 lock nuts and 2 washers COMPLYING TO SPECIFICATIONS IN Section 2 FOR 65 NB PIPE 59 SUPPLY OF ANCHOR FASTNERS FOR RCC WALL COMPLYING TO SPECIFICATIONS IN Section 2 60 SUPPLY OF ANCHOR FASTNERS FOR BRICK WALL COMPLYING TO SPECIFICATIONS IN Section 2 61 CONSTRUCTION OF Civil Pedestals for pipe support, COMPLYING TO SPECIFICATIONS IN ANNEXURE-d of Annexure-1 and pedestal drawing no LSSF GSSF PEDESTAL 003 Rev No 01 62 SUPPLY OF MS structural material consisting of channels, angles, MS plates etc., as per IS 2062 of reputed makes like TATA or SAIL or RINLor VSP - Rerolled structures are not acceptable along with fabrication works for pipe supports COMPLYING TO SPECIFICATIONS IN Section 2 63 Carbon steel welding, Butt welding of pipes, fittings by GTAW welding process for Root and SMAW for subsequent passes for road crossings with weld consumables, with 100 percent DP testing, 10 percent Radiography, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 65 NB joints 64 Carbon steel welding, Butt welding of pipes, fittings by GTAW welding process for Root and SMAW for subsequent passes for road crossings with weld consumables with 100 percent DP testing,10 percent Radiography, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 50 NB joints 65 Carbon steel welding, Butt welding of pipes, fittings by GTAW welding process for Root and SMAW for subsequent passes for road crossings with weld consumables with 100 percent DP testing, 10 percent Radiography, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 25 NB joints 66 Carbon steel welding, Butt welding of pipes, fittings by GTAW welding process for Root and SMAW for subsequent passes for road crossings with weld consumables with 100 percent DP testing, 10 percent Radiography, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 15 NB joints 67 Carbon steel Socket welding of fittings, Slip on flanges etc by GTAW welding process for Root and SMAW for subsequent passes road crossings with weld consumables, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 100 NB joints 68 Carbon steel Socket welding of fittings, Slip on flanges etc by GTAW welding process for Root and SMAW for subsequent passes road crossings with weld consumables, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 80 NB joints 69 Carbon steel Socket welding of fittings, Slip on flanges etc by GTAW welding process for Root and SMAW for subsequent passes road crossings with weld consumables, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 65 NB joints 70 Carbon steel Socket welding of fittings, Slip on flanges etc by GTAW welding process for Root and SMAW for subsequent passes road crossings with weld consumables, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 50 NB joints 71 Carbon steel Socket welding of fittings, Slip on flanges etc by GTAW welding process for Root and SMAW for subsequent passes road crossings with weld consumables, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 25 NB joints 72 Carbon steel Socket welding of fittings, Slip on flanges etc by GTAW welding process for Root and SMAW for subsequent passes road crossings with weld consumables, COMPLYING TO SPECIFICATIONS IN Section 1 and 2 of Annexure 1 for size of 15 NB joints 73 CS piping erection, Installation of flow components like manual ball valves ETC., providing adequate support, clamping, hydro-testing, painting, numbering and commissioning, as per specification of Annexure 1 74 Pickling and passivation of full CS piping COMPLYING TO SPECIFICATIONS IN ANNEXURE-b of Annexure-1 75 Supply and Application of Wrapper coating tape of 4 mm thick AWWA C 203 tape, Size of Pipe is 50 NB and 65 NB, as per specification of Annexure 1 76 Erection, Hydro testing of the air receivers - 9 nos. of air receivers of capacity 3 cu.m and 2 nos. of 5 cu.m and integration within the air piping system COMPLYING TO SPECIFICATIONS IN Section 1 77 Internal pickling & passivation of air receivers - 9 nos. of air receivers of capacity 3 cu.m and 2 nos. of 5 cu.m COMPLYING TO SPECIFICATIONS IN Section 1 and ANNEXURE-b 78 Paint supply and painting of 11 nos. of air receivers - inclusive of working plat forms COMPLYING TO SPECIFICATIONS IN Section 1

BRR:9692783 Bids Are Invited For Custom Bid For Services - 200151425 Job Contract For Mill Reject System Of Stage 1 And Mill Reject Compressor At Nstps

BRR:9686160 Tender for Work Contract For O&M Of Plc Based Coal Mill Reject Handling System Including Shifting And Transportation Of Mill Reject Of Unit 10 & 11 Stps Sarni.

BRR:9704004 Bids Are invited for Closed Impeller, Single Stage, Horizontal Centrifugal Pump - Closed Impeller, Single Stage, Horizontal Centrifugal Pump For Oesc Domestic Water Supply, Rated Capacity-30 Cu. M/H, Head At Rated Capacity-30Mwc, Design Pressure-10.0 Kg/Cm2(G),Type Of Casing-End Suction Top Discharge Back Pull Out,Shaft Sealing-Gland Packing, Service-Domestic Water Along With Mating Prime Mover(3 Phase, Squirrel Cage Induction Motor, Efficiency Class-Ie2),Base Plate& Associated Accessories And Mandatory Spares As Per Attached Technical Specifications & Data Sheets , 3 Phase, Squirrel Cage Induction Motor, Efficiency Class-Ie2 - 3 Phase, Squirrel Cage Induction Motor, Efficiency Class-Ie2 Spare For Item No. 1, Horizontal Centrifugal Oesc Pump As Per Attached Technical Specifications And Data Sheets. , Spare Impeller - Spare Impeller For Oesc Domestic Water Pump , Spare Shaft Sleeve - Spare Shaft Sleeve For Oesc Domestic Water Pump , Spare Shaft With Keys And Circlips - Spare Shaft With Keys And Circlips For Oesc Domestic Water Pump , Spare Coupling Set - Spare Coupling Set For Oesc Domestic Water Pump , Spare Casing Wear Rings Set - Spare Casing Wear Rings Set For Oesc Domestic Water Pump , Spare Impeller Wear Rings - Spare Impeller Wear Rings Set For Oesc Domestic Water Pump , Spare Stuffing Box Packing - Spare Stuffing Box Packing Set For Oesc Domestic Water Pump , Spare Gaskets Set For Pumps - Spare Gaskets Set For Oesc Domestic Water Pump , Spare Pump Bearings Set - Spare Pump Bearings Set For Oesc Domestic Water Pump , Spare Motor Bearings Set - Spare Motor Bearings Set For Oesc Domestic Water Pump Total Quantity : 21

BRR:9703143 Bids Are invited for P3 - Shim Fr600-D Stand Pvc -2Mm- 36St , P39 - Distance Sleeve Fr600 Fzv 1.0045 , Pd702010-Casing Hm250hc , W3 - Pump Impeller Hm250 C5 Hc , Back Liner Fr600 Hc , W17 -Gasket- 3 Inch Impeller 0. 25Mm Polyes , W18 - O-Ring 427.00X5.50-Nbr70, 3500-500 , W19 - Bolt For Backliner Fr600 Fzv , G1 - Lantern Ring Fr600 , G2 - Shaft Sleeve Fr600 Hc , G5 - Packing Fr600 16 Sq Nominal, 25 Bar , G22 - Stuffing-Box Fr600 3 Port ,Plate, Sc - G22 - Stuffing-Box Fr600 3 Port, Plate, Sc , G17 - O-Ring 434.00X3.53-Nbr70 , G24 - Spacer Fr600 Fzb , G58 - Gasket Sleeve 0.25 Mm Polyester , B1 - Flinger Fr600 , B3 - Shim Set End Cover Fr600 , B6 - Shaft Spacer Fr600 1.7225 , B11 - Shaft Fr600 Inch Bsw Dwe 1.6582 , B15.1 - Brng Spacer Fr600 Inner Dde-Dwe , B15.2 - Brng Spacer Fr600 Outer Dde-Dwe , B16 - O-Ring Sms1586-114.50X3.00-Nbr70 , W6 - O-Ring Sms1586-588.00X8.40-Nbr70 Total Quantity : 85

BRR:9702729 Bids Are invited for 135150151029 Bowl Bearing Impeller Shaft - Refer Technical Specification Sheet , 135150151047 Bowl Bearing Impeller Shaft - Refer Technical Specification Sheet , 135150151003 Line Shaft Rubber Bearing - Refer Technical Specification Sheet , 135150151017 Intermediate Shaft Sleeve - Refer Technical Specification Sheet , 135150351052 Shaft Sleeve Under Impeller - Refer Technical Specification Sheet , 135150351064 Transmission Shaft Sleeve - Refer Technical Specification Sheet , 135150351019 Transmission Bearing Raw - Refer Technical Specification Sheet , 135150351035 Column Pipe - Refer Technical Specification Sheet , 135150351006 Shaft Sleeve Under Stuffing Box - Refer Technical Specification Sheet , 135150351030 Impeller Shaft - Refer Technical Specification Sheet , 135150351032 Head Shaft - Refer Technical Specification Sheet , 135150351031 Inter Mediate Shaft - Refer Technical Specification Sheet , 135150251007 Impeller Shaft Sleeve - Refer Technical Specification Sheet , 135150251006 Impeller Shaft Sleeve - Refer Technical Specification Sheet , 135150251001 Casing Wear Ring - Refer Technical Specification Sheet , 135150251044 Head Shaft - Refer Technical Specification Sheet , 135150251009 Shaft Sleeve Under Transmission Bearing - Refer Technical Specification Sheet , 135150251021 Transmission Bearing - Refer Technical Specification Sheet , 135150251030 Intermediate Shaft - Refer Technical Specification Sheet Total Quantity : 54

BRR:9692768 Bids Are Invited For Stuffing Box, Sa500653-1, Metso Full Flow Stuffing Box, Material: Jl1030, For Scrubber Recycle Pump , Stuffing Box, Sa500655-1, Metso Material: Jl1030, For Slag Granulation Water Supply Pump , Back Liner, Pd770041, Metso Material: Jn3049, For Pump Sgp Water Sup Total Quantity : 7

BRR:9692559 Bids Are Invited For Solar Operated Bird Expeller Total Quantity : 5

BRR:9691043 Tender for Repairing Submersible Motar,Jet Pump, Various Water Pump And Hand Pump For M C Parli V

BRR:9681634 Supply Of Spare Of Ash Slurry Pump , Suction Side Cover,Ash Slurry Pump , Wear Plate (Bside),Ash Slurry Pump , Wear Plate (Sside),Ash Slurry Pump , Suction Adopter, Ashslurry Pump , Delivery Adopter , Impeller With Nut

BRR:9703706 Bids Are Invited For Custom Bid For Services - Repair, Replacement And Maintenance Of Electrics Of Battery, Coal & Coke Handling Plant And By-Product Plant Area Of Cob 10 Complex Including Shops Eot Cranes

BRR:9682710 Bids Are Invited For Custom Bid For Services - Annual Maintenance Contract Of 03 Nos Mekaster Make Elevators 01 Nos Installed At Chimney And 02 Nos At Coal Handling Plant Of Rtps Dvc

BRR:9707278 Bids Are invited for St020120313 - Acid Transfer Pump With Motor Cpu Njrp40 , St020120329 - Volute Casing Acidtransferpump Cpu , St020120318 - Casing Frame Acid Transferpump Cpu , St020120319 - Casing Cover Acid Transferpump Cpu , St020120328 - Shaft With Key And Locking Washer Cpu , St020120315 - Impeller With Cap Acidtransferpump Cpu , St020120316 - Deflector 2.125 Acidtransferpump Cpu , St020120326 - Set Of Assembly Kit Acidtransferpump Cpu , St020120323 - Bearing Bracket With Lantern And Leg Cpu , St020120321 - Bearing Cover (Ib And Ob) 10065250 Cpu , St020120320 - Body O Ring Acid Transferpump Cpu , St020120325 - Oil Seal(Ib&Ob)Acidtransferpump Cpu , St020120314 - Locating Flange(Sealcover)Size 2.125 Cpu , St020120322 - Mechanical Seal Set Size 2.125 Cpu , St020120327 - Shaft Sleeve Size 2.125 Acidtransferpump , St020120324 - Base Frame With Frpcoat Foundn Bolts Cpu , St020120317 - Coupling Set Bush Acid Transfer Pump Cpu Total Quantity : 75

BRR:9706850 Bids Are invited for O Ring Vition Gland Gasket , Gasket Vition Pt. No. G , Carbon Insert No.5 , Mechanical Seal Ring Tc Drive End , Seal Ring Tc Non Drive End , Complete Mechanical Seal Assembly Nde P2005 , Complete Mechanical Seal Assembly De P2005 , Nde Shaft Sleeve , De Shaft Sleeve , Duraflex Shaft Packing De , Duraflex Shaft Packing Nde , Viton O Ring Sleeve Packing Nde , Insert Mounting Duraflon De , Insert Mounting Duraflon Nde , Carbon Insert No.5 Nde Total Quantity : 67

BRR:9705128 Bids Are invited for Std Piston , Piston Ring , Big End Bearing , Crank Shaft , Sleeve Cyl , Packing Kit , Head Guide Set , Head Valve Set Total Quantity : 20

BRR:9703958 Bids Are Invited For Vacuum Pump Body , Puppet Valve Assembly , Air Ballast For Vacuum Pump , Eccentric Rotor For Vacuum Pump , Slider For Vacuum Pump , Hinge Bar For Vacuum Pump , Piston Pipe For Vacuum Pump , Oil Cooling Chamber Cover For Vacuum Pump , Side Cover For Valve Chamber Of Vacuum Pump , Valve Top Cover For Vacuum Pump , Shaft For Vacuum Pump , Shaft Sleeve For Vacuum Pump , Cooling Coil For Vacuum Pump Total Quantity : 1830

BRR:9703258 Bids Are Invited For Impeller Ej2030v Kgec 12.6 0120 , Flap Valve Ej2030v Kgec 12.6 0210 , Mechanical Seal Ej2030v- Kgec-12.6-0310 , Sw Pump Ball Bearing Ej2030v- Kgec-12.6-1170 , Intermediate Cover Ej2030v- Kgec-12.6-0140 , Impeller Ew6000b-Ao603395-3 , Shock Absorber Sr1199d Akcc 40 I , Capnut Ej3220d Clb0601u90102 , Set Screw Ej3220d Clb0601u90102 , Spring Ring Ej3220d Clb0601u90102 , Washer Ej3220d Clb0601u90102 , Gasket Set Ej3220d Clb0602u90102 , Set Screw Ej3220d Clb0602u90102 , Impeller Ej3220d Clb0602u90102 , Stub Shaft Ej3220d Clb0602u90102 , Spring Ring Ej3220d Clb0602u90102 , Washer Ej3220d Clb0602u90102 , Gasket Set Ej3220d Clb0601u90102 , 5 By 8 Inch Coupling Flanges Pump Side Ee6120b 22202 , 7 By 8 Inch Coupling Flang Motor Side Ee6120b 22238 , Power Modules Ee6120b 61051 , Flate, Electrode 12M Bipolar Ee6120b 77031Rt , Gasket Tank V2 12Mx Ee6120b 100006 , Gasket Tank V1 15Mx Ee6120b 100007 , Paint Sigma 300 Black 60 Micron Es7518d Pa S 300 , Avsm Ej2030v Cv65 250 0980 , Pump Shaft Eb6001k S450012 , Mechanical Seal Fire Main Pump Ac Sw And Ac Cw Pump Eg9064b Sb S 43 0450 M , Circlip Light Series B90x3 Eb1005v C913 4 58 , Impeller Eb1005v V3803n25 , Mechanical Seal Fw Domestic And Booster Pump Eg9064b Ers 5 0240 L , Reamer Bolt Dia 92Mm X 295 Length , Split Pin Dia 13Mm X 100 Length , O Ring Dia 270Mm Cord Dia 10Mm , Shock Absorber Or Damper Akcc 120M Sr6001d 949 03 064 , Bearing 21308E , Teflon Bush Id 45Mm X Od 80Mm X 300Mm , Power Spray Torch Along With Accessories , Mechanical Seal , Impeller , Shaft Sleeve , Oil Seal 40X63x10 , Wear Ring Total Quantity : 259

BRR:9697935 Supply Of Set Of Bush Bearings For Horizontal Canned Motor Pumpset Of Bush Bearings For Horizontal Canned Motor Pump,Set Of Bush Bearings For Horizontal Canned Motor Pump Of M/S Flowwell Model No. Ba3 2-125/1.8H/Rc/02 Suitable For Bhel Igbt Converter. (Set Consists Of Bush Bearing, Shaft Sleeve With Co Llar). [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ]

BRR:9695587 Bids Are invited for Metal O-Ring Part No.717 - Metal O-Ring Part No. 717-For Details Refer Attached Specification , Spacer Part No.46 - Spacer Part No. 46-For Details Refer Attached Specification , Nut Stopper Part No.492 - Nut Stopper Part No. 492-For Details Refer Attached Specification , Stopper Nut Part No.491 - Stopper Nut Part No. 491-For Details Refer Attached Specification , Wear Ring Part No.901 - Wear Ring Part No. 901-For Details Refer Attached Specification , Adjust Collar Part No.907 - Adjust Collar Part No. 907-For Details Refer Attached Specification , Shaft Sleeve Part No.45 - Shaft Sleeve Part No. 45-For Details Refer Attached Specification , Thrust Washer Part No.47 - Thrust Washer Part No. 47-For Details Refer Attached Specification , Bolts For Nut Locker Part No.7291 - Bolts For Nut Locker Part No. 7291-For Details Refer Attached Specification Total Quantity : 81

BRR:9693694 Bids Are Invited For Shaft And Sleeve As Per Drawings And Specifications Total Quantity : 1

BRR:9693576 Bids Are invited for New Control Panel Assembly With Up To 750 Ma , Regulator, Ke600,6260416, Wldng, Knob , Oil Ring For Bearing De 100 X 125 Mla 368 , Shaft Sleeve D.S. Bronze , Bevel Pulley, Ci, 5 In, 7.355 In, Rpe Sz 22Mm , Auxiliary Contactor 3 No. , Bush, Gm, Od-6 In, Id-4In, L-8 In, F-Haulage Total Quantity : 35

BRR:9693473 Bids Are invited for Bearing Housing De And Nde , New Control Panel Assembly With Up To 750 Ma , Balancing Disc , Balancing Ring , Shaft Sleeve Ds , Ms Block, 16 In, 10 In, 1.5 In, With Gm Bush , Bush Gm, Od-6 In Id-4 In, L-8 In, , Power Contactor, 415V, 3P, 170A, 3 No , Power Contactor 525V, 3P, 200A Total Quantity : 31

BRR:9682860 Bids Are invited for Bearing End Cover Set With Specifications As Per Gem Technical Sheet , Bearing Housing De With Specifications As Per Gem Technical Sheet , Bearing Housing Fe With Specifications As Per Gem Technical Sheet , Neck Ring With Specifications As Per Gem Technical Sheet , Thrust Bearing Cage With Specifications As Per Gem Technical Sheet , Locking Washer With Specifications As Per Gem Technical Sheet , Lock Nut With Specifications As Per Gem Technical Sheet , Logging Ring With Specifications As Per Gem Technical Sheet , Sleeve Nut With Specifications As Per Gem Technical Sheet , Oil Ring Brass With Specifications As Per Gem Technical Sheet , External And Internal Circlip With Specifications As Per Gem Technical Sheet , Bearing Housing With Specifications As Per Gem Technical Sheet , Brg End Cover De And Nde With Specifications As Per Gem Technical Sheet , Spacer Sleeve With Specifications As Per Gem Technical Sheet , Shaft Sleeve With Specifications As Per Gem Technical Sheet , Impeller Wear Ring With Specifications As Per Gem Technical Sheet , Back Cover With Specifications As Per Gem Technical Sheet , Neck Ring With Specifications As Per Gem Technical Sheet Total Quantity : 36

BRR:9682111 Bids Are Invited For 2042920073 CASING RING DELIVERY SIDE, P/N 19100 2 2042920083 CASING RING SUCTION SIDE, P/N 19000 3 2042920253 IMP. SHFT, P/N 18600 4 2042920263 INTERMEDIATE SHFT, P/N 18400 5 2042920273 HEAD SHFT, P/N 18500 6 2042920553 IMP. RING DELIVERY SIDE, P/N19300 7 2042920563 IMP. RING SUCTION SIDE, P/N 19200 8 2042920753 SHFT SLEV PUMP SIDE, P/N 31100 9 2042923103 THRUST BRG CARRIER, P/N 24700 10 2042923253 IMP. NUT, P/N 33000 11 2042924273 SCREWED CPLG, P/N 39500 12 1899400853 CASING RING SUCTION SIDE,P/N19000 13 1899401313 SCREWED COUPLING,P/N39500 14 1899403063 IMPELLER NUT,P/N33000 15 1899403073 IMPELLER RING SUCTION SIDE,P/N19200 16 1899403083 ENCLOSED IMPELLER,P/N15100 17 1899405953 IMPELLER SHAFT,P/N18600 18 1899405973 HEAD SHAFT,P/N18500 19 1899405993 INTERMEDIATE SHAFT,P/N18400 20 1899406153 SHAFT SLEEVE PUMP SIDE,P/N31100 21 2042930073 CASING RING DELIVERY SIDE, P/N19100 22 2042930083 CASING RING SUCTION SIDE, P/N 19000 23 2042930203 THRUST BRG CARRIER, P/N 24700 24 2042930253 IMP. SHFT, P/N 18600 25 2042930283 INTERMEDIATE SHFT, P/N 18400 26 2042930553 IMP. RING DELIVERY SIDE,P/N19300 27 2042930563 IMP. RING SUCTION SIDE, P/N 19200 28 2042933073 IMP. NUT, P/N 33000 29 2042936153 SHFT SLEV PUMP SIDE, P/N 31100 Total Quantity : 104

BRR:9681772 Bids Are invited for Key Part No 3210201 For Bhm 50 Btrdt Pump , Key Part No 3280101 For Bhm 50 Btrdt Pump , Shaft Sleeve Part No 3100101 For Bhm 50 Btrdt Pump , Distance Sleeve Part No 3170101 For Bhm 50 Btrdt Pump , Head Shaft Part No 1850101 For Bhm 50 Btrdt Pump , Muff Coupling Part No 3450101 For Bhm 50 Btrdt Pump , Key With Fastner Part No 3210101 For Bhm 50 Btrdt Pump , Trans Bearing Part No 3570101 For Bhm 50 Btrdt Pump , Intermidiate Shaft Sleeve Part No 3120101 For Bhm 50 Btrdt Pump , Impeller Shaft Part No 1860101 For Bhm 50 Btrdt Pump , Bowl Bearing Part No 3540101 For Bhm 50 Btrdt Pump , Impeller Shaft Sleeve Part No 3160101 For Bhm 50 Btrdt Pump , Key With Fastner Part No 3200101 For Bhm 50 Btrdt Pump , Lock Washer Fastner Part No 4100101 For Bhm 50 Btrdt Pump , Bearing Bush Part No 3530101 For Bhm 50 Btrdt Pump , Bush Part No 4000101 For Bhm 50 Btrdt Pump , Washer Part No 4090101 For Bhm 50 Btrdt Pump , Coupling Pin Part No 4040101 For Bhm 50 Btrdt Pump , Coupling Pin Nut Part No 4080101 For Bhm 50 Btrdt Pump , O Ring Part No 5250101 For Bhm 50 Btrdt Pump , Bearing Bush Part No 3520101 For Bhm 50 Btrdt Pump , O Ring Part No 5240101 For Bhm 50 Btrdt Pump , Intermidiate Shaft Part No 1840101 For Bhm 50 Btrdt Pump , O Ring Part No 5220201 For Bhm 50 Btrdt Pump , Bell Mouth Part No 2110101 For Bhm 50 Btrdt Pump , Impeller Guide Piece Part No 2120101 Total Quantity : 146

BRR:9681537 Bids Are Invited For 1 300 NB PLATE VALVE 2 200 NB DOME VALVE COMPLETE ASSY 3 PLUG VALVE DIA 400 4 GUIDE BUSH 5 RUBBER SEAL 6 200 NB EXPANSION JOINT 7 300 NB DOUBLE BELLOW EXPANSION JOINT 8 WATER VALVE ASSY FOR 150 TPH ASH CONDIT 9 COMPLETE BIFURCATING CHUTE 10 SHAFT SLEEVE SET 11 SHAFT SLEEVE SET 12 DRIVE SPROCKET 13 DRIVEN SPROCKET 14 DRIVEN ROLL INTREGAL WITH SHAFT 15 DRIVE ROLL INTREGAL WITH SHAFT Total Quantity : 51

BRR:9680671 Bids Are invited for 1 St Gear Main Shaft , 2 Nd Gear Main Shaft , 3 Rd Gear Main Shaft , Shift Sleeve Constan , Assy Sait Shaft , Hub Front Wheel , Steering Gasket , Fork Rev And 4Th , Fork 2 Nd And 3 Rd , Fork 4Th , Screw Fork Lock , Fly Wheel Assy , Driven Plate , Duel Clutch Assy Total Quantity : 70

BRR:9708017 Supply Of Set Of Special Tools For M/S Elgi Air Compressor Model Rr20100 Cg (M) Ob, Consisting Of 06 (Six) Items As Follows: (1) Ring Of Gauge 127 Dia As Per Elgi Pt. No. 020482550 Qty/Set: 01 No. (2)Ring Gauge 100 Dia As Per Elgi Pt. No 00415240 ,Qty/Set: 01 No. (3) Cat Nut Cum Valve Tool As Per Elgi Pt. No. 000328120 Qty/Set: 01 No. (4) Unloader Valve Cap Nut Torque Tool As Per Elgi Pt. No. 070409930 Qty/Set: 01 No. (5) Valve Cap Nut Torque Tool As Per Elgi Pt. No. 070409940 Qty/Set: 01 No. (6) Valve Plug Torque Tool As Per Elgi Pt. No.070409960 Qty/Set: 01 No Make/Brand- Elgiset Of Special Tools For M/S Elgi Air Compressor Model Rr20100 Cg (M) Ob, Consisting Of 06 (Six) Items As Follows: (1) Ring Of Gauge 127 Dia As Per Elgi Pt. No. 020482550 Qty/Set: 01 No. (2)Ring Gauge 100 Dia As Per Elgi Pt. No 00415240 ,Qty/Set: 01 No. (3) Cat Nut Cum Valve Tool As Per Elgi Pt. No. 000328120 Qty/Set: 01 No. (4) Unloader Valve Cap Nut Torque Tool As Per Elgi Pt. No. 070409930 Qty/Set: 01 No. (5) Valve Cap Nut Torque Tool As Per Elgi Pt. No. 070409940 Qty/Set: 01 No. (6) Valve Plug Torque Tool As Per Elgi Pt. No.070409960 Qty/Set: 01 No Make/Brand- Elgi,Set Of Special Tools For M/S Elgi Air Compressor Model Rr20100 Cg (M) Ob, Consisting Of 06 ( Six) Items As Follows: (1) Ring Of Gauge 127 Dia As Per Elgi Pt. No. 020482550 Qty/Set: 01 No. (2)Ring Gaug E 100 Dia As Per Elgi Pt. No 00415240 ,Qty/Set: 01 No. (3) Cat Nut Cum Valve Tool As Per Elgi Pt. No. 00032 8120 Qty/Set: 01 No. (4) Unloader Valve Cap Nut Torque Tool As Per Elgi Pt. No. 070409930 Qty/Set: 01 No. ( 5) Valve Cap Nut Torque Tool As Per Elgi Pt. No. 070409940 Qty/Set: 01 No. (6) Valve Plug Torque Tool As Per Elgi Pt. No.070409960 Qty/Set: 01 No Make/Brand- Elgi [ Warranty Period: 30 Months After The Date Of D Elivery ] ]

BRR:9704853 Bids Are invited for Clutch Release Brg , Mounting Pad Rear , Pressure Plate , Fog Light , Carburator Assy , Pipe Assy , Main Brake Valve , Spark Plug , Valve Assy , Vent Pipe , Hydraulic Aggregate Total Quantity : 17

BRR:9702678 Bids Are Invited For 250Nb Knife Gate Valve(Kgv) Total Quantity : 12; VALVE,GATE DESIGN SPEC : MSS-SP-81 END CONNECTION : FLANGED MATERIAL,BODY : CAST IRON MATERIAL SPEC,BODY : EN-JL1040 BORE : 250 MM PRESSURE DESIGNATION : PN6 NOMINAL SIZE : 250 MM ADDITIONAL INFORMATION : BI-DIRECTIONAL KNIFE EDGE GATE V/V BODY:JL1040 (WAFER TYPE SEMI LUG DESIGN CAST IRON-SL1040-EPOXY POWDER COATING)(10 MM THICK), GATE:1.4301 NITRITED-STAINLESS STEEL(ASTM A240 GRADE 304) NITRITED (HARDNESS IS APPROX 1000 HV), FLANGE DRILLING STANDARD: PN 10 EN 1092/DIN 2501,FACE TO FACE:EN-558-1/ISO 5752 BASIC SERIES 20/DN 3202 K1, MAXIMUM WORKING PRESSURE:3.0 KG/M2(G) WITHOUT POWER CYLINDER

BRR:9700770 Procurement Of Motor Operated Concentric Butterfly Valves (4Inx150) For Hvlr Monitors And Api 6D Plug Valves(10Inx150) For Separator Filters At Nrpl Bijwasan And Associated Service Jobs During Installation.

BRR:9705368 Bids Are Invited For Led Batten , Sluice Valve For Water Works Purposes (50 To 1200 Mm Size) (V2) As Per Is 14846 , Bathroom Or Toilet Mirror (V3) , Cable Joint Kit Suitable For Cables Up To And Including 33 Kv (V2) , Led Luminaire (Recessed Luminaire) (V3) Conforming To Is 10322 (Part 5/Section 2) , Led Luminaire For Floodlight (V2) Conforming To Is 10322 (Part 5/Section 5) , Ball Valves Ptmt Aluminium Rod And High Density Plastic Ball For 15 Mm , Ball Valves Of Ptmt Aluminium Rod And High Pressure Plastic Ball For 15Mm , Float Valve Pvc 20 Mm With Pvc Float , Wire Meshobliquecloth Ss Wire Dia 0.36Mm Width 1.4Mm Four Feet Wide 15 Mtr Long , Gi Gate Valve 20 Mm , Float Valve Pvc 15 Mm With Pvc Float , Float Valve Pvc 25 Mm With Pvc Float , Gate Valve 50 Mm , Aluminium Body Door Closer Hydraulically Regulated Designation , Cold Emulsion For Road , Pre Painted Galvalume Al Zi Gi Steel Sheet 0.5Mm Tensile Str 550 Mpa , Chloropyriphos Ec-20 Chemical For Att In 20 Ltr Pack , Stainless Steel Plat Rack 36Inchby30inchby10inch Of 1Mm Thickness , Pvc Bathroom Mirror Cabinet 330X430 , Rotational Polyethylene Triple Layer Water Storage Tanks Capacity 500 Litres , Rotational Polyethylene Triple Layer Water Storage Tanks Capacity 1000 Litres , Hydraulic Door Closer Design Number 03 Universal Type , Cp 15Mm Dia Bore Bib Cock Of With Clutch Or Butterfly Handle But Fancy Type , Cp 15Mm Dia Borevpillar Cock With Capstan Head Fancy Type. , Cp 15Mm Dia Bore Angle Cock , Cp Brass Wall Mixer And Basin Mixer For Hot And Cold Water For 15Mm , Cushion Of Sofa Set With Cover Cushions Size 21Inchby22inchby4inch Of 40 Density Total Quantity : 12654

BRR:9705176 Bids Are Invited For Manual Control Valve Mcv Assy Two Way , Adaptor For Mcb , Hydraulic Hose Pipe Wire Braided Size Head 27Mm, Length-300Cm, Pressure 4000Psi , Hydraulic Hose Pipe Wire Braided Size Head 36Mm, Length 234Cm, Pressure 4000Psi , Hydraulic Hose Pipe Wire Braided Size Head 36Mm Length-160Cm Pressure 4000Psi , Hydraulic Hose Pipe Wire Braided Size Head 36Mm Length 100Cm Pressure 4000Psi , Hydraulic Hose Pipe Wire Braided Size Head 36Mm Length 130Cm Pressure 4000Psi , Gate Way Valve Two Way 01 Inch , Hydraulic Jack Adaptor 70 Mm , Bottle Screw Withlock And Lock Pin Heavy Duty Length-45Cm, Dia 6Cm , T Type Adaptor With Elbow 30 Mm Dia , M S Channel Make Tata 5 Inch X 2 Pt 5 Inch X 6 Mm , M S Channel Make Tata 6 Inch X 3 Inch X 6 Mm , M S Sheet Make Tata 8 Feet X 4 Feet X 3.15Mm , M S Sheet Make Tata 8 Feet X 4 Feet X 06Mm , M S Sheet Make Tata 8 Feet X 4 Feet X 08Mm , M S Sheet Make Tata 8 Feet X 4 Feet X 10Mm , M S Angle 1 Pt 5 Inch X 1 Pt 5 Inch X 5 Mm , Pin For Reinforcement Rod 4Inch X 25Mm , Hydraulic Jack 5 Ton Double Acting Cylinder With Pin Cylinder Length 45Cm , Adaptor For Gate Valve , Grinding Wheel 6 Inch , Red Oxide , Paint Yellow , Ms Welding Rod Make Esab 400 X 4Mm , Nut And Bolt Self Lock Nut With Washer Make Tv M12 X 1 Pt 75 Length 40 Mm Head 18 Mm , Nut And Bolt Self Lock Nut With Washer Make Tvs M14 X 1 Pt 75 Length 50 Mm Head 21 Mm , O Ring 116 , O Ring 111 Total Quantity : 144

BRR:9703597 Bids Are invited for Bricks , Cement Bag 50 Kg , Steel Bar Iron Rod , Cgi Sheet 4 Inch X10 Inch , Iron Angles For Cgi Sheet 20 Feet , Pvc Door , Water Tank Syntex 500 Ltrs , Wall Paint And Distamper 40 Ltrs , L Bend Cast Iron Pipe Fitting , Pvc Pipe 6 Mtr , Pvc Pipe 3 Mtr , Drainage Pipe , Pvc Gate Valve , Water Tap , Toilet Seat Indian Style , Flush Tank , Wash Basin , Looking Mirror , Aggregate , Sand , 1.5 Sq Mm Wire , Led Bulb With Holder , Switch Board , Labour Charge For Construction Work 02X Skilled Labour , Labour Charge For Construction Work 03X Non Skilled Labour , Labour Charge For Plumbing Work 02X Skilled Labour , Labour Charge For Electrician Work 02X Skilled Labour , Labour Charge For Painting Work 02X Skilled Labour , Labour Charge For Digging Work 02X Non Skilled Labour Total Quantity : 5741

BRR:9702633 Bids Are Invited For Copper Alloy Taps/Stop Valves (V2) Conforming To Is 8931 , Plastics Bib Taps Pillar Taps Angle Valves And Stop Valves As Per Is 9763:2000 (Latest) , Bathroom Water Shower (V2) , Water Fittings - Copper Alloy Float Valves (Horizontal Plunger Type) As Per Is: 1703 , Copper Alloy Gate Valve For Waterworks Purpose As Per Is 778 , Stainless Steel Shelf Rack , Connection Pipe With Nuts (V2) , Soap Dish - Case , Floor Drain Traps , Waste Pipe Total Quantity : 3537

BRR:9702419 Bids Are Invited For VALVE,GATE _ M1897731119 Vv, Ga: Mss-Sp81, Fg300, Cl150, 200Nb, Kgv Total Quantity : 80

BRR:9702046 Bids Are invited for Pump With Flp Motor - Flame Proof Pump With Motor, Capacity 5Hp, Pressure 5 Kgs , Nrv 2 Inch - Flange Type Nrv 2 Inch Class 150 , Staner 3 Inch - Flange Type Staner 3 Inch Class 150 , 3 Inch Gate Valve - Flange Type 3 Inch Gate Valve Class 150 , 2 Inch Gate Valve - Flange Type 2 Inch Gate Valve Class 150 , Sitc Water Tank 750L - Supply And Installtion With Civil Structure Sintex/Patton/Vectus Make Plastic Water Tank 750 L , Sitc Of 3 Inch Gi Pipe - Supply And Fabrication Of 3 Inch Gi Pipe Class 150 , Sitc Of 2 Inch Gi Pipe - Supply And Fabrication Of 2 Inchgi Pipe Class 150 Total Quantity : 130

BRR:9699170 Tender For Special Repairs To Bldg No P-16, P-17 And P-199 At Pao Quarters, S Of A, Under Ge Devlali; 1 Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stone work and precast concrete articles complete all as specified and as directed. 2 M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed. 3 All as per item No.02 above but except burnt bricks. 4 Taking down cement plaster any description on brick or stone cement concrete surfeaces/walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. 5 M & L 10 mm thick rendering in cement mortar 1:6 on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. 6 M&L for 1.5mm thick wall care putty on wall complete all as specified and as directed incl sanding rubbing for smoothness of surfaces. 7 M&L for rendering 15mm thick in cement mortar 1:4on brick work or stone masonry/concrete /RCC surfaces rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. 8 M&L for rendering 5mm thick in cement mortor 1 :3 as in ceilingplaster on concrete surfaces,rendering is to be finished even and smooth without using extra cement complete all as spd and directed at any height. complete all as specified and as directed. 9 M&L for preparing new plastered or unplastered surfaces of ceiling, and applying three coats of white wash complete all as specified and directed. 10 M&L for preparing new plastered or unplastered surfaces of walls, and applying three coats of white wash complete all as specified and directed. 11 M&L for preparing new plastered or unplastered surfaces of walls, and applying two coats of oil emulsion distemper over a coat of interior wall primer complete all as specified and directed. 12 Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed. 13 M&L for joint free coloured glazed ceramic tiles in vertical surface of size 300X 600X7 to 8 mm thick of different shade colour and pattern as approved, over and including 10 mm thick rendering in CM 1:4 as backing coat finished to receive wall tiles, set and jointed in neat cement slurry and pointed in white or colour cement to matchetc complete all as directed and specified. 14 M&L Vitrified tiles 8- 9 mm thick (square/rectangular) polished, area of each tilesexceeding 0.42 Sqm but not exceeding 1.00 Sqm, in floors including screed bed 15mm thick in cement mortar 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. 15 All as per Sl item No 14 above but in skirting over 10mm thick backing coat in cement mortar (1:4) complete all as specified and directed. 16 M&L for non skidjoint free ceramic tiles (of size 7 to 8mm thick (coloured) (Square/rectangular) area of each tile exc 0.06 but n exc 0.18 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. 17 M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. 18 All as per item No 17 above,but as in skirtingover 10mm thick backing coat in CM (1:4). 19 M&L machine cut cudappa stone slab 20-25mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. 20 M&L for Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting andpolishing types including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed. 21 M&L for Machine cut kota stone slab on steps as inriser/tradein single piece of any size 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing complete including screed bed 15mm thick in cement mortar (1:6) complete all as specified and as directed. 22 M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including 15mm thick screed bed in cement mortar (1:6), complete all as specified and as directed by Engineer-in-charge. 23 Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. 24 M&L for chequered cement concrete tiles 30cm x30cmx 20mm thick Rubber moulded with grey cementandpigment, over and including 15mm thick screed in cement mortar (1:6), set jointed & pointed in neat cement slurry in floors complete all as specified and as directed. 25 M&L for precast cement concrete interlocking tiles 60mm thick Rubber moulded with strength 30 N/sqmm as in floor/pavement laid on 30 mm thick stone dust cushioning laid dry to the profile complete all as specified and as directed. 26 Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 27 M&L for 30mm thick PCC (1:2:4) Type B1 with 20mm graded stone aggregate as in levelling course as in floor complete all as specified and as directed. 28 M&L for cement concrete (1:4:8) type D 2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed. 29 M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection including making joint at every 3mtr interval and and corner finished even and fair and laid in alternate bays complete all as specified and directed. 30 Taking down carefully existingunserviceable bitumen felt/ APP membrane including plaster (any number of layers ofanythickness) etc and removing of the rubbish to a distance not exceeding500m from the building and depositing where directed complete all as spd and directed. 31 M&L for rendering 10 mm thick cementplaster in cement mortar 1:4 on RCC/concreteroof/terrace surfaces mixed with water proofing liquid complete all as specified and as directed. Note: Water Proofing liquid shall be measured and paid separately. 32 M&L for providing plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) for filleting, benching,coving of chajjah top/junctions, padding concrete below roof treatment etcslightly rounded or chamfered on edges wherever required includingnecessary form work/moulds etcincluding applying cement slurry on surface area @2.50 Kg/Sqm completeall as specified andas directed . 33 M&L for cleaning the newly plastered surfaces of concrete (roof etc) with wire brushes and applying water proofing treatment as under :-i) Apply one coat of oil bound bituminous primer @ 0.25 kg/Sqm.ii) Providing and laying3 mm thick APP modified water proofing membrane weighing not less than 3.5 Kg/Sqm reinforced with non woven polyester mat weighing not less than 160 gm/Sqm all as specified procured from any one of the approved manufacturers.iii)Apply one coat of solar reflective bituminous aluminium paint @ 0.15 Kg/Sqm over membrane over non assesible roof surfaces complete all as per manufacturers instructions and as directed . 34 Demolition of RCC cement concrete (reinforced) in roofs, floors(other than ground floors), beams staircases, landing, chajjas, and similar suspended work. 35 M&L for RCC (nominal mix) Type B1 1:2:4 (20 mm graded aggregate) in chajjas. 36 Formwork to chullah hoods, chajjas, troughs and similar items including edges, flat rough finished surfaces of concrete 37 M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. 38 All as per item No. 37 above but 6mm to 8mm dia. 39 Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sq. m each complete all as specified and directed. 40 Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq m each complete all as specified and directed. 41 S&F for Factory made single extruded WPC (Wood Polymer composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65x125 mm double rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be madeMake : ECHON/Sintex/Rajshree/Navaratan Note : Rate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 42 S&F for 35mm thickfactory made flush door shutter, solid core construction, with particle board core and plywood face panels ,commercial type on both faces including teak wood beading 6mm thick all around complete all as specified and as directed. 43 S&F 2nd class H.W. glazed & skeletonshutter 35mm thick factory madeopen rebated & prepared to receive glass gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,gauge etc size of members of shutter as specified in SSR part-I , section 8, clause 8.24 (a) complete all as specified and as directed. 44 Supply for Pipe Supporting Clamping - Single Pipe of PVC dia 75 mm (3) down take pipe fixing done with Clamping System consists of Profile Bracket + Continuous Slotted C Channel + U Bolt Rubber Sleeve mounted System running vertically with wall distance100 mm (4):Pipe Support Clamping made of : 1. Profile Bracket having Wall Distance 100 mm (4) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Continuous Slotted C Channel with ribs to be used of size 250 mm (10) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied+ Zn Al Flake coated with material thickness of 3mm.(Contd/...) 45 Item No 44 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set as per DIN 6923 - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit : 1. Profile Bracket Wall distance 75 mm (3) - 2 Nos. 2. Continuous Slotted C Channel of Size 250 mm (10) - 1 No.; 3. U Bolt Rubber Sleeve mounted for 75 mm (3)PVC Pipe Dia. - 1 No.; and 4. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. 46 Dismantling of boarding any description fixed in any position with nails complete all as specified and as directed 47 M&L for preparation of new untreated wood and wood based surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. 48 M&L for preparation of new untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. 49 S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x100 mm single rebate comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be pincl in quoted rate).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made Make : ECHON/Sintex/Rajshree/NavaratanRate of MS hold fast/Fasteners/SS Dash fastener deemed to be included in quoted rates . 50 S&F 30 mm thick moulded Prelaminatedboth side WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on front side with wood grain texture on front and plain on back side with density not less than 600 Kg/cum.Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fireretardant and having screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50N/ mm2, modulus of elasticity 850N /MM2 and resistance to spread of flame of Class A category with property of being termite/ bore proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S. screws, all as per direction of Engineer-in-Charge. (Note : Stainless steel butt hinges and necessary SS screws shall be paid separately) . 51 M & Lfor fabrication & fixing tohorizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc forModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR boards (Water/termite proof) with white laminated colour on both sides, of approved qualityincluding paste to all exposed edge byedge Binding Tape to match the colour of boardincluding provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) 52 M & Lfor Fabrication & fixing to front side /all exposed sides ofModular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 18mm thick HDHMR UV, glossy/maat finish boards front side and other side white UV boards edges duly bonded with PVC taping to match the colour of UV boards all around including provision of cabinet for keeping baskets/ drawers etc andincluding taking down existing shutter/panel/partition and all other accessories in any type and any position complete all as specified and as directed. (Make :Action tesa/kitply or Archid) 53 S&F powder coated sliding window, three trackshutters with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass of 4mm thick black tinted and stainless steel wire loth 0.36mm nominal dia of wire andaverage width of aperature 1.40mm, size ofside rails, top rails , bottom rail 30x10mm and size of three track chowkat frame 90 x 30mm and thickness of aluminium member shall be 1.40mm thick complete all as specified in MES SSR, Part-I clause 10.37complete all as specified and as directed. 54 S&F for powder coated aluminium ventilator shutters with frame not less than 0.55Kg/Rm, half bottom portion fixed with 4mm thick glass with fixed type shutter and top half portion lower type with 4mm thick frostedglass and outer side fixed with stainless steel wire mesh, shutters aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, necessary aluminium fittings etc complete all as specified and directed. 55 S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0all as specified and as directed. 56 S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and as directed. and directed. 57 S&F hasp and staple aluminium anodished safety type with mild steel hinges pin incl bolt to hinge plate and fixed with screw 125mm size. 58 S&F for door/shutter ball catches with 8 mm dia steel ball and brass body and striking plate incl magnetic with striking plate for WPCcabinets, cupboard shutters complete all as specified. 59 S&F 100mm long butt hinges stainless steel complete fixed with full body threaded Star headed counter sunk SS screws all as specified and as directed. 60 S&F 140 mm aluminium floor door stoppers double legged with hard drawn steel spring fitted in floor complete all as specified and as directed. 61 S&F 150mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and as directed. 62 S&F continuous (piano) hinges, stainlesssteel, bright finishedwith 30 mm flaps handle complete all as specified and as directed. 63 S&F 150mm size aluminium anodized handle complete all as specified and as directed. 64 M&L for 300mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. 65 S&F in repair 25 mm dia and 1 to 1.50 mm thick stainless steel curtain rodincluding stainless steel brackets, stops, end knobs/ side globe, wall to wall bracket ect. complete all as specified and directed by Engr-in-charge. 66 S&F in repair PVC cabinet 450x600mm overall size with looking mirror of selected qality 5mm thick glass mounted over PVC framingcomplete all as specified of Make Prayag/Polytuf/Somany 67 Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. 68 S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. 69 S&F in repairs stainless steel plate rackof size not less than 90cmx75cm fixed with stainless steel screw including taking out old unserviceable wooden plate rack as approved by GE complete all as specified. 70 S&F in repairs glazed earthen ware viterous china wash down water closet (pedestal pattern) white coloured with and including plastic water closed seat, white, closed pattern with recessed bottom, and cover and mild steel chromium plated hinging device etccomplete all as directed. Make somany Cat Part No. SMART EWC P or Equivelent in Cera/Hindware/Parryware. 71 S&F in rep vitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests and trap (excluding flushing cistern and flush pipe) including provn of cement concrete bedding complete asfixed complete all as specified. 72 S&F in repairs glazed earthen ware viterous china wash basin white coloured (flat back or angle back type), size 550x400 mm and including CI brackets, outlet of 32 mm bore HDPE outlet pipe with necessary fittings, 32 mm bore brass CP waste couplings and bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed etc complete all as directed. 73 S & F in repair 15 mm bore, fancy type, bib taps, long body, cast copper alloy, 15mm bore with fancy chromium plated screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engr-in-Charge. Make : Cat Part No FLR- 5047 N of Jaquar or equivalent in kohlar, grohe and Roca 74 S & F in repair 15 mm bore, fancy type, angular valve, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed by Engr-in-Charge. Make : Cat Part NoFLR-5053 N of Jaquar or equivalent in kohlar, grohe and Roca 75 S&F for 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends as fixed in repairs complete all as specified and as directed.. 76 S&Fin repair Health Faucet (ABS Body) with 1.20 M Long PVC Tube and wall Hook screwed down to GI pipe or union/angle valve complete all as specified and directed by Engr-in-charge Make Jaquar Code No- ALD-CHR-583 or equivalent in kohlar, grohe and Roca 77 S & F in repair CP, soap dishcomplete all as specified and as directed by Engr-in-Charge. Make Jaquar Code No- AKP -35731 P or equivalent in kohlar, grohe and Roca 78 S&F in repair fancy type Toilet paper holder, steel chromium plated approximate size 140X140X50mm complete all as specified and as directed. 79 S&F in repair Overhead Shower 120mm round shape, Single Flow (Face Plate Stainless Steel and ABS body with Chrome Finish) with Rubit Cleaning System including shower arm of size 190mm long flat shape for wall mounted shower with flenge complete all as specified and directed. Make Jaquar Cat Part No. OHS-1663 & SHA483 or equivalent in kohar, grohe and Roca. 80 S&F sheet glass corner wall mounted shelf assembly consisting of 8mm thick sheet glass 220mmX220mm size with chromium plated bracket guard and railing 50mm high complete all as specified and as directed. 81 S&F in repair brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges. 82 S&F in repairs 15mm bore CP Sink mixer with regular swinging spout (Wall mounted model) with connecting legs and wall flenge complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5309N or equivalent in kohar, grohe and Roca. 83 S & F in repair for 15 mm bore, fancy type, Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange and including Telephone Shower complete all as specified and as directed by Engr-in-Charge Make Jaguar Cat Part No: FLR-5281N, Hand shower HSH 1715, flexible tube SHA-549D12or equivalent in kohlar, grohe and Roca. 84 S&F in repair 15mm dia brass chromium plated two waybib cock with long flange screwed down for 15 mm dia bore GI Pipe complete all as specified and directed. Make Jaguar Cat Part No: FLR 5041 Nor equivalent in kohlar, grohe and Roca . 85 S&F in repair PVC valveless flushing cistern, low level white with inlet ball valve float and handle including brackets complete fixed capacity of flush 10 ltrs complete all as specified and as directed. 86 Dismantling/Disconnectingof water tanks (RCC hume Pipe/PVC)including disconnecting all connections etc 1000 ltrs capacity. complete for following capacity of tanks . 87 Refixing the old rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. 88 S&Fnew rotational moulded polythylene water storage tank 1000 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks. 89 Dismantling/Disconnecting of water tanks (RCC hume Pipe/PVC)including disconnecting all connections exc 250 and n exc 500 ltrs capacity. complete for following capacity of tanks . 90 S&Fnew rotational moulded polythylene water storage tank 500 ltrs capacity (cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-Iincluding providing and fixing ball brass valve high pressure with polythene float and fly nut, 20mm bore complete for following capacity of tanks 91 S & F 16mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) 92 S & F 25mm dia (internal dia) CPVC pipes with all fittings SDR 11 & Plain CPVC SDR 11fixedto walls and ceilings with adequate nos of clamps or laid in floors including cutting chases in stone,concrete block or slab wall pinning in making good to facing where ever required to the sufraces for concelled water supply including CPVC brass fitting such as elbow, socket, nipple required for fixing of plumbing items complete all as specified and as directed. (Note : No extra payment shall be made for cutting chases & CPVC fittings) 93 Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 94 Taking up or down 20mm bore steel tubing and connections, including cleaning for re-fixing or removal to store complete all as specified and as directed. 95 Cutting chases in Stone, concrete block or slab walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth all as specified and as directed. 96 S&F in repairs 25mm bore CPVC gate valves screwd both ends for CPVC pipescomplete all as specified and directed. 97 Taking down of PVC Pipes with fittings upto 75mm to 110mm dia/eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc.,complete all as specified and as directed. 98 S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. 99 All as per item No 97 but except pipe complete all as specified and directed. 100 S&F for 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall with clamp complete all as specified and as directed. 101 All as per item No 99 but except pipe complete all as specified and directed 102 S&F PVC (SWR) bend with access door any radius 110mmcomplete all as specified and directed. 103 S&F PVC (SWR) bend any radius 110mmcomplete all as specified and directed. 104 S&F PVC (SWR) bend with access door any radius 75mm complete all as specified and directed. 105 S&F PVC (SWR) bendany radius 75mm complete all as specified and directed. 106 S&F forn110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 107 S&F for 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed. 108 S&F 110 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 109 S&F 75 mm PVC (SWR) junction single T equal or unequal complete all asspecified and directed . 110 S&F 75 mm PVC (SWR) vent cowl complete all asspecified and directed . 111 S&F 100 mm PVC (SWR) vent cowl complete all asspecified and directed . 112 S&F in repairs 75 mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. 113 Complete removal of existing treatment and applying three coats of white wash on surfaces of ceiling, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. 114 Complete removal of existing treatment and applying two coats of white wash on surfaces of walls, including removal of unnecessary nails and filling of holes/cracks by crack filler, complete all as specified and directed. 115 Complete removal of existing treatment and applying two coats of oil emulsion distempering over a coat of interior wall primer over 1.5mm thick wall care putty, including removal of unnecessary nails and filling of holes/cracks by crack filler on surfaces of walls, complete all as specified and directed. 116 M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately). 117 S & F and Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium U channel of size 15 mm x 15 mm and 1.40 mm thick and fixed on wall , with screw to the under layer , repair to the edges of panels and finishing the aluminium U channel while cement is green complete all as per specifications and direction of the Engineer-in-charge. 118 Supply for Pipe Supporting Clamping - Single Pipe of dia 20 mm (3/4) down take pipeline fixing done with Clamping System consists of Mono Bracket + U Bolt Rubber Sleeve mounted system running vertically with wall distance 100 mm (4):Pipe Support Clamping made of: 1. Mono Bracket for 20 mm (3/4) pipe having Wall Distance 100 mm (4) made of Low Carbon Hot Roll Gauge Corrected Oil Pickled and Drawn (HROP D) Steel (IS 1079); material size 48 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs.2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing semi transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration set - Zn Al Flake coated.Hotdip Galvanizing: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns).Material Grade : IS 1079 used as per MTC confirms to EN 10204 3.1. Material Qty. for one unit: 1. Mono Bracket for 20 mm (3/4) pipe, Wall distance 75 mm (3) - 1 Nos. 2. U Bol Rubber Sleeve mounted for 20 mm (3/4) GI / UPVC/ CPVC pipe Dia. - 1 nos and 3. Fixing Nail Zn coated of thickness 6.5 mm and length 63 mm (2 1/2) - 2 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make : Shaivi or equivalent as approved by GE. 119 Supply of Pipe Supporting Clamping System having Profile Bracket+ Slotted C Channel + U Bolt System for Five Pipelines (110mm + 75mm + 25mm + 20mm + 15mm) running Vertical Fixed line with wall distance 4 (100 mm):Pipe Support Clamping made of:1. Profile Bracket Wall Distance 100 mm (4) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079); material size 32 mm x 3 mm with ribs and notch are Hot Dip Galvanzied + Zn Al Flake coated having Salt Spray Test (Test method - ASTM B-117-2019) result 2000 hrs with SS304 Hex Flange Bolt with Serration 5/16 x 3/4 (A/F 13mm) as per DIN 6921and SS304 Hex Flange Nut BSW 5/16 x 18 x 8 x 13 with Serration as per DIN 6923.2. Slotted C Channel B3 Type to be used of size 712mm (28) (Continuous Slotted C Channel with ribs) made of Low Carbon Hot Roll gauge corrected Oil Pickeled & Drawn (HROP D) Steel (IS 1079) are Hot Dip Galvanzied + Zn Al Flake coated with material thickness of 3mm. (Contd/...) 120 Item No 118 Contd/...3. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn Al Flake coated with noise absorbing transparent ribbed silicon rubber sleeve; with Hex Flange Nut BSW 5/16 Hotdip Galvanizing: As per x 18 x 8 x 13 with Serration set as per DIN 6923-Zn Al Flake coated.Material Grade: IS 1079 used as per MTC IS 2629 (1985)-610 grams/m2 (>85 microns). confirms to EN 10204 3.1.Material Quantity for one unit: 1. Profile Bracket of Wall distance 3 (75 mm)-2 Nos. 2. Slotted C Channel of Size 28(712mm) - 1 No.; 3. U Bolt Rubber mounted for 4 (110 mm) Pvc pipe Dia. -1 nos. ; 4. U Bolt Rubber mounted for 3/4 (20mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 1/2(15mm) Pvc Pipe Dia -1 nos.; U Bolt Rubber mounted for 3(75mm) Pvc Pipe Dia -1 nos. ; U Bolt Rubber mounted for 1(25mm) Pvc Pipe Dia -1 nos. ;5. Fixing Nail thickness 6.5 mm approx and length 62 mm (2 1/2) Zn coated-4 nos. Fixing Details: Pipe Support Clamping Unit to be fixed at every metre distance in the duct as specified in Chief Engineer Pune Zone Technical Drawing (TD) of Factory Made Pipe Supporting System : CEPZ/2023/TD/03 and CEPZ/2024/01.Make: Shaivi or equivalent as approved by GE. 121 Supply only integral liquid water proofing compound complete all as specified & as directed by Engineer-in-Charge. Make : Pidilite/Sika 122 M&L for special treatment to floor/wall sunken portion with demolition of PCC with plaster of entire sunken area (bottom & sides upto dado level) including removal of demolished material exc 250m and n exc 500m, prepration of surface by cleaning to remove loose particles, dust, latance etc, replacement of floor trap of PVC SWR 100 mm boreand applying 10mm thick plaster in CM (1:4) with WPC liquid Conplast 421,and applying one coat each of Nitoproof 100 priming coat@1Ltr/5Sqm, after the priming coat applying Nitoproof 120 on plastered surfaces @1Ltr/2.5Sqm, filling the sunken floor with PCC (1:5:10) using brick bat and WPC Conplast - 421, rendering again 40mm thick in CM (1:4) mixed withWPC Conplast - 421, area offloor/kitchen/toilet/bathupto 3..00 Sqm complete all as specified and as directed. 123 S&F LDPE pipe 40mmbore fixed to wall/ceiling with bends/elbow complete all as specified. 124 S&F in repair mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed. 125 M&L for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in concrete bed to 150mm bore drain pipes including packing under & haunching against the sides of pipes after they are laid & tested for 150mm bore pipe including demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement concrete mortar complete all as specified and as directed. 126 M&L for 150 mm bore PVC SWR drain pipe laid in floor or in trenches incl connecting with solvent cement and jointing complete with socket , complete all as specified and as directed. 127 M&L for precast cement concrete 1:2:4 type B-1 using (20mm aggreates) set in CM (1:4) as in cover slabs (for manhole etc) & simillar articles with plain faces complete (Reinforcement will be measured and paid separatly)all as specified and directed. 128 Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dense soil. 129 Returning, filling in including spreading, levelling, watering & well ramming in layers n.exc 25cm. 130 Removing excavated material (surplus soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed by Engineer-in-charge. 131 S&F Stainless steel Z type hinges 75 mm longmedium weight fixed with SS star headed screw complete all as spd and directed as in Kitchen cabinet cupboardshutters all as spd and directed. 132 S&F auto closing hinges 35 mm of 0 crank( KH-001) OR 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters Make :Hexa, Hettich, Hafele 133 S&F Ball bearing runners 45 mm Telescopic channel (KTS-20) full extension load capacity 50 kgs, Make :Hexa, Hettich, Hafele 134 S&F chrome plated stainless steel wire basket (storage basket) pull out type for large utensils, size 480 x 500 x 150 mm of Grade 304 with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.Make :Hettich, Hafele, Butterfly 135 S&F chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make :Hettich, Hafele, Butterfly 136 S&F chrome plated stainless steel wire basket (plate basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by Engineer-in–charge. Make :Hettich, Hafele, Butterfly 137 S&F chrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 x 100 mm Grade 304with necessary fixing clips etc. complete in all respect as specified and as directed by engineer- in – charge.Make : Hettich, Hafele, Butterfly 138 S&F chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 480 x 500 x 200 mm Grade 304with necessary slidingchannel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in - charge. Make : Hettich, Hafele, Butterfly 139 Supply chrome plated stainless steel wire basket (Bottle pull out) pull out type two self, size 120 x 500 x 432 mm with necessary sliding channel frame structure, fixing clips etc. complete in all respect as specified and as directed by Engineer- in – charge.” Make : Hettich, Hafele, Butterfly 140 S&F in repairs 15mm bore CP central hole basin mixer with regular spout without popup waste system with 450mm long braided hoses, 20mm Cartridge size complete all as specified and as directed. Make Jaquar Cat Part No. FLR-5167NB or equivalent in kohar, grohe and Roca. 141 S&F 100 mm long extruded brass handles, fabricated type polished for modular kitchen as specified and directed. 142 Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridges etc complete all as specified and directed. 143 S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. 144 S&F Pre-painted galvalume aluminium zinc coating GI based plain steelsheet 0.50 mm thick of Red colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screwscomplete all as specified and as directed. 145 S&F steel work (tubular/hollow) in trusses, rafters, beams, purlins etc, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and as as directed. 146 M&L for providing and fixing in repair Stainless steel (Grade 304)railing made of hollow tubes, channels, plates etc. , including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangemnet and its components including levelling, grouting, providing holes as required for services etc. complete all as specified and direction of Engineer-in-Charge. 147 S & F powder coated aluminium sections for doors, windows, partition including fabrication of frame and shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc. including all accessories such as glazings clips, provn of AC opening and rubber beadings for fixing glass panes in frame complete all as specified by Engr-In- Charge. Note : (i) Glass panes/wire cloth will be measured & paid separately . (ii)The quoted rate shall be inclusive of cost of rubber beading and glazing clips,hinges, handle. However it will be not be weighed and not paid separately.(iii) All other minor details including cost of locking arrangement shall be included in the quoted rate.Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India 148 S&F 4.80 mm thick black tinted glassof any size in each pane complete all as specified and directed 149 Taking down copper/aluminium point wiring(light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. 150 Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth 151 M&L Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cableand one single core 1.5 sqmmsizecopper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of mild steel modular type terminal boxes of suitable module made with mild steel sheet duly galvanised and suitable for fixing modular type switches / sockets / regulators / AC starters etc.fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-(a) 152 One light point/ exhaust fan point controlled by one switch 153 One fan point controlled by one switch 154 One 5 pin socket outlet. 5 Amps on the same board. 155 One 5 pin socket outlet. 5 Amps on the independent. board 156 One bell/ buzzer point controlled by one push button 157 One light point controlled by two two way switches. 158 All as per item No- 149 above but One 15 A socket outlet independent with 2.5 sq mm PVC cable and 2.5 sqmm cable as earth continuity wire. 159 Supply and fix switch piano modularsingle pole one way 6 Amps one module complete all as specied . 160 Supply and fix switch piano modularsingle pole one way 16 Amps one module complete all as specied . 161 Supply and fix Modular switch 2 way 6A, 1 modulee complete all as specied . 162 Supply and fix Modular Bell push 6A 1 module complete all as specified . 163 Supply and fix Bell electric AC 230 Volts single pole ding dong type complete all as specified and as directed. 164 Supply and fixmodular socket outlet6A - 2/3 pin combined 2 module (multi purpose ) complete all as specified and as directed. 165 Supply and fix modular socket outlet6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed. 166 Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed. 167 S & F in replacement oflampangle/batten holderBakelite complete all as specified and as directed. 168 S & F Decorative wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LED Lamp B22 base.. Make Havels, model- LHDL06160099 (CITY 3) 169 S&F in replacement LED tube light 20 Watt fitting white powder coated slim box type batten made of formed CRCAsheet with snap on installer sutable fordouble side connection LED tube in and including batten and tube etc complete in all respect. Make- Havells Model-Fixture REGALBATTENT 8UPTO1X22WSSBSWH, Tube-CRYSTAL 1213T8D STL 20W LED 865S GLASS or equivalent in Wipro/ Philips/Bajaj 170 S &F New E-Lite LED Pride Plus Neo. Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack With 10watt LED tube 171 Supply and fix fan step regulator, 120W - 2 module for ceiling fan of size 900 mm to 1400 mm sweep working on 230 Volts AC supply with all necessary connections etc completeall as specified and as directed. 172 Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 12 Ways 173 Supply and fix sheet metal enclosure DBs SPN, 240V with 200 Amps rated bus barsdouble door complete all as specified and as directed of 4 Ways 174 Supply and fix in replacement MCB SP 6 to 32 Amps, 240 volts complete all as specified and as directed. 175 Supply and fix in replacement MCB SPN32Amps, 240 volts complete all as specified and as directed. 176 Supply and fix MCB SPN 40 Amps, 240 volts complete all as specified and as directed. 177 M & L sub main wiring with 2 single core, 10 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FRcable 1100 Volts grade incl 10 Sqmm PVC insulated unsheathed multi stranded copper conductor FRLSas continuous earth wire and connecting to common earth terminals completeall as specified and directed in PVC conduitsNote :-(i) Two run of copper cable and one run of earth wire and PVC conduit shall be measured as one length. 178 Ditto all as per item No - 169 above but with 2 runs of 4 Sqmm cable with one run of 4.0 Sqmm cable for earthing. 179 S & F Plug & socket enclosure in sheet metal enclosure with 20A SP MCB complete all as specified and as directed. 180 Supply,install, testing & commissioning of factory made LT panel wall mounted board made outof CRCA sheet 2 mm thick indoor type toltally enclosed weather,dust and vermin proof compartment type with front hinged door and locking arrengement mounted on M S flat iron clamp welded to panel body duly grouted on wall 415 V, 3 phase, 4 wire AC, 50 Hz having aluminium bus bar 160 Amps for pfase-03 Nos & neutral- 01 No with 02 Nos Earth Terminals. insulated with PVC sleeves, space for fixing single phse KWH Emergy meter 04 Nos 40x40x6 mm size angle iron hold fast, fastener bolts, copper lugs, spacers channels,rubber gaskets, locking knob, hylem sheet piece,PVC shrinkable sleeves, nut and bolts, washers etc suitable single core copper wire connectors, suitable compartments and epoxy power spray paint with primer complete all as specified including the following accessoriesincluding taking down old unservicable LT panel boardINCOMING- a) MCCB 415 V 4 POLE 25 KA breaking capacity of 63 Amps- 01 No b) R-Y-B phase LED indicating lamp-03 NosOUTGOING-a) MCB SPN 40 Amps, 230V, 10 KA, C curve - 05 Nosb) Providing space for and refixing existing single phase KWHelectric enery meter-04 Nos c) Copper wire 10 Sqmm wire and open terminals for all meters totaly pre wired. d) Glass windows for all meter for taking meter readingNote:-1. Cost of taking down electric meters from old unserviceable penel board keeping in safe custody, and refixing the same electric meters in new panel is deemed to be includede in rate quoted. 181 Taking down old unserviceable Exhaust fans, depositing to AGE E/M store & Supply and fix new exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm. (cutting hole in wall for instalation of exhaust fan is deemed to be included in rate quoted) 182 Taking down old unserviceable ceiling fans, depositing to AGE E/M store & supply and fixingnew ceiling fans complete with blades, down rods, accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) 183 Taking down old unserviceable storage type water heater, depositing to AGE E/M store & supply and fixingnew electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc 184 M&L earthing GI4mm GI wire complete with galvanized steel plate electrode 600 mm x 600 mm x 6.0 mm thick, burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI wire 4 mm size by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 3 of SSR-2009 Part I and includingnecessary excavation and earth work in any type of strata, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc., complete all as specified.

BRR:9697984 Supply Of Isi Marked Gate Valve (Leaded Tin Bronze) Nominal Size - 20 Mm, Class -2, Screwed End, Screwed On Bonnet Integral Seat, Design Horizontal Straight Way Type Confirming To Is:778/1984 Reaffirmed2010.Isi Marked Gate Valve (Leaded Tin Bronze) Nominal Size - 20 Mm, Class -2, Screwed End, Screwed On Bonnet Integral Seat, Design Horizontal Straight Way Type Confirming To Is:778/1984 Reaffirmed2010.,Isi Marked Gate Valve (Leaded Tin Bronze) Nominal Size - 20 Mm, Class -2, Screwed End , Screwed On Bonnet Integral Seat, Design Horizontal Straight Way Type Confirming To Is:778/1984 Reaff Irmed2010. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:9692548 Bids Are Invited For Stainless Steel Sinks For Domestic Purposes (V3) As Per Is 13983 , Cp Towel Rail 20Mm Dia X 600Mm Long , Float Valve 20Mm Complete Hdpe Heavy , Looking Mirror 600 X 450 X 5Mm Thick With Aluminium Frame With Hanging Support , Pvc Flushing Cistern 10Ltrs Complete As Per Is 7231 2021 , Pvc Toilet Mirror Cabinet 330 X 430 Mm , Ss 204 Thickness 0 Point 85 Mm Plate Rack With 5 Shelf Size 24 X 36 X 10 , Ss Wire Mesh 204 Grade 4 Feet Ms Wire Mesh 0 Point 56Mm X 1 Point 18Mm , Cp Towel Rail 20 Mm Dia X 600 Mm Long , Ptmt Float Valve 20Mm Complete Set Hdpe Heavy , Looking Mirror 5Mm Thick 600Mmx450mm Aluminium Framed , Pvc Flushing Cistern Kit Complete , Pvc Cabinet Mirror 355Mmx455mm , Ss Wire Mesh 204 Grade 3 Feet Ms Wire Mesh 0 Point 56Mm X 1 Point 18Mm , Brass Gate Valve 25Mm Isi Marked , Brass Gate Valve 15Mm Isi Marked , Brass Gate Valve 20Mm Isi Marked , Gi Pipe 20Mm Med Grade Isi , Gi Pipe 15Mm Med Grade Isi , Hydraulic Door Closer As Per Is 3564 1995 Tubular Weight Carring 70 Kgs Of Door , Cp Towel Rail 20 Mm X 600 Mm Long , Pvc Float Valve 20 Mm , Pvc Kit For Low Level Flashing Cistern , Pvc Cabinet Mirror 330 X 430Mm Total Quantity : 1047

BRR:9691690 Bids Are Invited For LED Batten , XLPE Cable for Working Voltages up to and Including 1.1 KV as per IS 7098 (Part 1) , LED Luminaire for Road and Street Lights (V2) Conforming to IS 10322 (Part 5 / Section 3) , Self Ballasted LED Lamps (LED Bulb) (V3) Conforming to IS 16102 (Part 2) (Under BIS Scheme - II) , MCB - Miniature Circuit - Breakers for A.C. Operation as per IS / IEC 60898 (Part 1) , Molded Case Circuit Breakers (MCCB) as per IS / IEC 60947 , LED Garden Light (V2) , Flat Cable, Copper Conductor with PVC Insulation and Sheathed ISI Marked To IS 694 , PVC Insulated Unsheathed Cable with Flexible Conductor ISI Marked To IS 694 , LED Bulkhead Light , Capacitors for Electric Fan Motors as per IS 1709 (V2) , Non Modular Piano Type Domestic Electrical Switches ISI Marked To IS 3854 , Non Modular Piano Type Domestic Electrical Sockets ISI Marked To IS 1293 , Electrical Plugs (V2) ISI Marked to IS 1293 , LED Tube Rod 4 feet with fitting , Cable Joint Kit for 11 kv Earthing Indoor termination head shrinkable 3 core 240 SQMM to 300 SQMM , Cable Joint Kit for 11 kv Grade straight through heat shrinkable 3 core 120-185 SQMM , LED Rod 15 watt 4 pin type , Copper lugs 95 sqmm , Sheet Metal enclosure with 2 pin PLUS earth plug and socket with SP MCB 32 Amp , Cable joint kit for 11 KV indoor termination 3 core heat shrinkable xlpe 50 AND 95 sqmm , Onload change over four pole 100 Amp H D , Service Cable 2 Core 10 Sqmm , Service Cable Alluminium 2 Core 16 Sqmm , Desert cooler Fan Motor 1400 RPM With Fan Blade , Cable joint kit for 11 kv indoor termination 3 core heat shrinakble 120-185 Sqmm , On load changeover 4 pole 200 Amp H D , Gate Valve 20 MM , PVC Tape 20 MM X 25 Mtr , Cable Joint Kit 11 kv Outdoor termination 3 core shnk XLPE 120 AND 185 Sqmm , Copper lugs 35 Sqmm , Aluminum Lugs 35 Sqmm , PVC Tape 25 x 25 Total Quantity :

BRR:9691604 Bids Are Invited For Copper Alloy Taps/Stop Valves (V2) Conforming To Is 8931 , Bathroom Water Shower (V2) , Stainless Steel Shelf Rack , Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To Is 778 , Cast Copper Alloy Screw Down Bib Taps And Stop Valves For Water Services Conforming To Is 781 , Ceramic ( Vitreous China ) Flushing Cisterns For Water Closets And Urinals Conforming To Is 774 , Towel Ring , Towel Rail , Bathroom Or Toilet Mirror (V3) Total Quantity : 671

BRR:9691042 Tender For Municipal Council Parli Vaijnath Water Supply Department To Supply Miscellaneous material =1 MS Flange 2 2 MS Flange 2 1/2 3 MS Flange 3 4 MS Flange 4 5 Ball Valve 1/2 6 Ball Valve 3/4 7 Ball Valve 1 8 Ball Valve 1 1/4 9 Ball Valve 1 1/2 10 Ball Valve 2 11 Ball Valve 2 1/2 12 Ball Valve 3 13 Ball Valve 4 14 Gate Valve 1/2 15 Gate Valve 3/4 16 Gate Valve 1 17 Gate Valve 1 1/4 18 Gate Valve 1 1/2 19 Gate Valve 2 20 Gate Valve 2 1/2 21 Gate Valve 3 22 Gate Valve 4 23 Sluice Valve 1/2 24 Sluice Valve 3/4 25 Sluice Valve 1 26 Sluice Valve 1 1/4 27 Sluice Valve 1 1/2 28 Sluice Valve 2 29 Sluice Valve 2 1/2 30 Sluice Valve 3 31 Sluice Valve 4 32 Non-Return Valve 1/2 33 Non-Return Valve 3/4 34 Non-Return Valve 1 35 Non-Return Valve 1 1/4 36 Non-Return Valve 1 1/2 37 Non-Return Valve 2 38 Non-Return Valve 2 1/2 39 Non-Return Valve 3 40 Non-Return Valve 4 41 Steel Valve 1/2 42 Steel Valve 3/4 43 Steel Valve 1 44 Steel Wall 1 1/4 45 Steel Wall 1 1/2 46 Steel Wall 2 47 Steel Wall 2 1/2 48 Steel Wall 3 49 Steel Wall 4 50 GI Pipe 1/2 51 GI Pipe 3/4 52 GI Pipe 1 53 GI Pipe 1 1/4 54 GI Pipe 1 1/2 55 GI Pipe 2 56 GI Pipe 2 1/2 57 GI Pipe 3 58 GI Pipe 4 59 GI Elbow 1/2 60 GI Elbow 3/4 61 GI Elbow 1 62 GI Elbow 1 1/4 63 GI Elbow 1 1/2 64 GI Elbow 2 65 GI Elbow 2 1/2 66 GI Elbow 3 67 GI Elbow 4 68 GI Coupling 1/2 69 GI Coupling 3/4 70 GI Coupling 1 71 GI Coupling 1 1/4 72 GI Coupling 1 1/2 73 GI Coupling 2 74 GI Coupling 2 1/2 75 GI Coupling 3 76 GI Coupling 4 77 GI Union 1/2 78 GI Union 3/4 79 GI Union 1 80 GI Union 1 1/4 81 GI Union 1 1/2 82 GI Union 2 83G EYE UNION 2 1/2 84 G I UNION 3 85 G Ay Union 4 86g Income Close Butch 1/2 87G Income Close Butch 3/4 88G Income Off Butch 1 89g Income Close Butch 1 1/4 90g Eye Off Butch 1 1/2 91G Income Off Butch 2 92g Eye Off Butch 2 1/2 93G Income Off Butch 3 94 G Income Off Butch 4 95 Toti Plastic 1/2 96 Toti Plastic 3/4 97 Toti Plastic 1 98 Toti G I 1/2 99 Toti Ji Ay 3/4 100 toti g ay 1 101 BANGDI PIPE 1/2 102 BANGDI PIPE 3/4 103 Bangdi Pipe 1 104 BANGDI PIPE 1 1/4 105 BANGDI PIPE 1 1/2 106 Bangdi Pipe 2 107 BANGDI PIPE 2 1/2 108 Bangdi Pipe 3 109 Bangdi Pipe 4 110 Rubber Pipe 1/2 111 Rubber Pipe 3/4 112 Rubber Pipe 1 113 Rubber Pipe 1 1/4 114 Football 1/2 115 Football 3/4 116 Football 1 117 Football 1 1/4 118 Football 1 1/2 119 Football 2 120 Football 2 1/2 121 Football 3 122 Football 4 123 for grease pump 124 grease pump 125 PVC Pipe 4kg Pressure 1/2 126 PVC Pipe 4kg Pressure 3/4 127 PVC Pipe 4kg Pressure 1 128 PVC Pipe 4kg Pressure1 1/4 129 PVC Pipe 4kg Pressure 1 1/2 130 PVC Pipe 4kg Pressure 2 131 PVC Pipe 6kg Pressure 1/2 132 PVC Pipe 6kg Pressure 3/4 133 PVC Pipe 6kg Pressure 1 134 PVC Pipe 6kg Pressure 1 1/4 135 PVC Pipe 6kg Pressure 1 1/2 136 PVC Pipe 6kg Pressure 2 137 PVC Pipe 6kg Pressure 2 1/2 138 PVC Pipe 6kg Pressure 3 139 PVC Pipe 6kg Pressure 4 140 PVC Elbow 1/2 141 PVC Elbow 3/4 142 PVC Elbow 1 143 PVC Elbow 1 1/4 144 PVC Elbow 1 1/2 145 PVC Elbow 2 146 PVC Elbow 2 1/2 147 PVC Elbow 3 148 PVC Elbow 4 149 PVC Tee 1/2 150 PVC Tee 3/4 151 PVC Tee 1 152 PVC Tee 1 1/4 153 PVC Tee 1 1/2 154 PVC Tee 2 155 PVC Tee 2 1/2 156 PVC Tee 3 157 PVC Tee 4 158 PVC Braider Coupling 1/2 159 PVC Braider Coupling 3/4 160 PVC Braider Coupling 1 161 PVC Braider Coupling 1 1/4 162 PVC Braider Coupling 1 1/2 163 PVC Braider Coupling 2 164 PVC Braider Coupling 2 1/2 165 PVC Braider Coupling 3 166 PVC Braider Coupling 4 167 PVC Closed Butch 1/2 168 PVC Closed Butch 3/4 169 PVC Closed Butch 1 170 PVC Closed Butch 1 1/4 171 PVC Closed Butch 1 1/2 172 PVC Closed Butch 2 173 PVC Closed Butch 2 1/2 174 PVC Closed Butch 3 175 PVCClosed Butch 4 176U PVC Pipe 4kg Pressure 1/2 177U PVC Pipe 4kg Pressure 3/4 178U PVC Pipe 4kg Pressure 1 179 u pvc Pipe 4kg Pressure 1 1/4 180U PVC Pipe 4kg Pressure 1 1/2 181U PVC Pipe 4kg Pressure 2 182 UPVC Elbow 1/2 183 UPVC Elbow 3/4 184 UPVC Elbow 1 185 UPVC Elbow 1 1/4 186 UPVC Elbow 1 1/2 187 UPVC Elbow 2 188 UPVC Elbow 2 1/2 189 UPVC Elbow 3 190 UPVC Elbow 4 191 UPVC Tee 1/2 192 UPVC Tee 3/4 193 UPVC T1 194 UPVC Tee 1 1/4 195 UPVC T 1 1/2 196 UPVC T2 197 UPVC T 2 1/2 198 UPVC T3 199 UPVC T4 200 uPVC Union 1/2 201 UPVC UNION 3/4 202 UPVC UNION 1 203 UPVC UNION 1 1/4 204 UPVC UNION 1 1/2 205 uPVC Union 2 206 UPVC UNION 2 1/2 207 UPVC UNION 3 208 UPVC UNION 4 209 uPVC Threader 1/2 210 UPVC Threader 3/4 211 UPVC Threader 1 212 UPVC Threader 1 1/4 213 UPVC Threader1 1/2 214 UPVC Threader 2 215 UPVC Threader 2 1/2 216 UPVC Threader 3 217 UPVC Threader 4 218 UPVC Threader Coupling 1/2 219 UPVC Threader Coupling 3/4 220 UPVC Threader Coupling 1 221 UPVC Threader Coupling 1 1/4 222 UPVC Threader Coupling 1 1/2 223 UPVC Threader Coupling 2 224 UPVC Threader Coupling 2 1/2 225 UPVC Threader Coupling 3 226 UPVC Threader Coupling 4 227 UPVC Reducer 1/2 228 UPVC Reducer 3/4 229 UPVC Reducer 1 230 UPVC Reducer 1 1/4 231 UPVC Reducer 1 1/2 232 UPVC Reducer 2 233 UPVC Reducer 2 1/2 234 UPVC Reducer 3 235 UPVC Reducer 4 236 UPVC Closed Butch 1/2 237 UPVC Closed Butch 3/4 238 UPVC Close Butch 1 239 UPVC Close Butch 1 1/4 240 UPVC Closed Butch 1 1/2 241 UPVC Closed Butch 2 242 gland rope 8mm 243 gland rope 10mm 244 gland rope 12mm 245 gland rope 14mm 246 gland rope 16mm 247 Adjustable Spanner 1/2 248 Adjustable Spanner 3/4 249 Adjustable Pan 1 250 Adjustable Spanner 1 1/4 251 Adjustable Spanner 1 1/2 252 Adjustable Pan 2 253 Pan Set Ring & Band 1/2 254 Pan Set Ring & Strip 3/4 255 Pana Set Ring & Band 1 256 Pan Set Ring & Strip 1 1/4 257 Pana Set Ring & Band 1 1/2 258 Pana Set Ring & Band 2 259 Pan Set Ring & Band 2 1/2 260 Pana Set Ring & Patti 3 261 Pana Set Ring & Band 4 262 Pakkad Vegvegali Size 263 screwdriver set 264 Pipe Wrench 265 hexablade 266 Sulochan Daba 267 M.Seal 268 wiser 269 ​​nutbolt velocity gauge 270 Voicer Velocity Size 271 rubber seat 272 Hatodi Vegvegali Size 273 teplon tape 274 chainblock 2 to 5 tons 275 hand pump set complete 276 Carter Paine 277 Hatampache Foundation Nut 278 Plunger and Tickle 279 1HP Single Phase Submersible Pump 280 2HP Single Phase Submersible Pump 281 3HP Single Phase Submersible Pump 282 4HP Single Phase Submersible Pump 283 5HP Single Phase Submersible Pump 284 1 HP 3 Phase Motor 285 2 hp 3 phase motor 286 3 HP 3 Phase Motor 287 4 HP 3 Phase Motor 288 5 HP 3 Phase Motor 289 6HP 3 Phase Motor 290 7 hp 3 phase motor 291 7.5 HP 3 Phase Motor 292 single phase motor 293 1 HP to 7.5 HP 3 Phase Motori Karita Sutte Sahitya 294 Starters for Velocity HP Motors 295 Bearing SKF Company Different Numbers 296 gain switch velocity ampere 297 carbon brush 298 carbon holder 299 oil for transformer 300 sleep ring 301 Copper Lug 100/200 Amp 302 polished paper 303 oil paper 304 panel box with starter and other literature 305 20hp 135hp brass bush 306 service wire 2 core velocity size 307 kitkat veggie size 308 capacitor/base 110 and 225 Amp 309 Submersible pump cable 310 Adhesive tape 311 2 X 6 Nipple 1/2 312 2 X 6 Nipple 3/4 313 2 X 6 Nipple 1 314 2 X 6 Nipple 1 1/4 315 2 X 6 Nipple 1 1/2 316 2 X 6 Nipple 2 317 2 X 6 Nipple 2 1/2 318 2 X 6 Nipple 3 319 2 X 6 Nipple 4 320 2 X 9 Nipple 1/2 321 2 X 9 Nipple 3/4 322 2 X 9 Nipple 1 323 2 X 9 Nipple 1 1/4 324 2 X 9 Nipple 1 1/2 325 2 X 9 Nipple 2 326 2 X 9 Nipple 2 1/2 327 2 X 9 Nipple 3 328 2 X 9 Nipple 4 329 2 X 4 Nipple 1/2 330 2 X 4 Nipple 3/4 331 2 X 4 Nipple 1 332 2 X 4 Nipple 1 1/4 333 2 X 4 Nipple 1 1/2 334 2 X 4 Nipple 2 335 2 X 4 Nipple 2 1/2 336 2 x 4 Nipple 3 337 2 x 4 Nipple 4 338 2 x 3 Nipple 1/2 339 2 x 3 Nipple 3/4 340 2 x 3 Nipple 1 341 2 x 3 Nipple 1 1/4 342 2 x 3 Nipple 1 1/2 343 2 x 3 Nipple 2 344 2 x 3 Nipple 2 1/2 345 2 x 3 Nipple 3 346 2 x 3 Nipple 4 347 1 1/4 x 6 Nipple 1/2 348 1 1/4 x 6 Nipple 3/4 349 1 1/4 x 6 Nipple 1 350 1 1/4 x 6 Nipple 1 1/4 351 1 1/4 x 6 Nipple 1 1/2 352 1 1/4 x 6 Nipple 2 353 1 1/4 x 6 Nipple 2 1/2 354 1 1/4 x 6 Nipple 3 355 1 1/4 x 6 Nipple 4 356 1 1/4 x 9 Nipple 1/2 357 1 1/4 x 9 Nipple 3/4 358 1 1/4 x 9 Nipple 1 359 1 1/4 X 9 Nipple 1 1/4 360 1 1/4 X 9 Nipple 1 1/2 361 1 1/4 X 9 Nipple 2 362 1 1/4 X 9 Nipple 2 1/2 363 1 1/4 X 9 Nipple 3 364 1 1/4 X 9 Nipple 4 365 1 1/4 X 4 Nipple 1/2 366 1 1/4 X 4 Nipple 3/4 367 1 1/4 X 4 Nipple 1 368 1 1/4 X 4 Nipple 1 1/4 369 1 1/4 X 4 Nipple 1 1/2 370 1 1/4 X 4 Nipple 2 371 1 1/4 X 4 Nipple 2 1/2 372 1 1/4 X 4 Nipple 3 373 1 1/4 X 4 Nipple 4 374 1 1/4 X 3 Nipple 1/2 375 1 1/4 X 3 Nipple 3/4 376 1 1/4 X 3 Nipple 1 377 1 1/4 X 3 Nipple 1 1/4 378 1 1/4 X 3 Nipple 1 1/2 379 1 1/4 X 3 Nipple 2 380 1 1/4 X 3 Nipple 2 1/2 381 1 1/4 X 3 Nipple 3 382 1 1/4 X 3 Nipple 4 383 1 1/2 X 6 Nipple 1/2 384 1 1/2 X 6 Nipple 3/4 385 1 1/2 X 6 Nipple 1 386 1 1/2 X 6 Nipple 1 1/4 387 1 1/2 X 6 Nipple 1 1/2 388 1 1/2 X 6 Nipple 2 389 1 1/2 X 6 Nipple 2 1/2 390 1 1/2 X 6 Nipple 3 391 1 1/2 X 6 Nipple 4 392 1 1/2 X 9 Nipple 393 1 1/2 X 9 Nipple 3/4 394 1 1/2 X 9 Nipple 1 395 1 1/2 X 9 Nipple 1 1/4 396 1 1/2 X 9 Nipple 1 1/2 397 1 1/2 X 9 Nipple 2 398 1 1/2 X 9 Nipple 2 1/2 399 1 1/2 X 9 Nipple 3 400 1 1/2 X 9 Nipple 4 401 1 1/2 X 4 Nipple 1/2 402 1 1/2 X 4 Nipple 3/4 403 1 1/2 X 4 Nipple 1 404 1 1/2 X 4 Nipple 1 1/4 405 1 1/2 X 4 Nipple 1 1/2 406 1 1/2 X 4 Nipple 2 407 1 1/2 X 4 Nipple 2 1/2 408 1 1/2 X 4 Nipple 3 409 1 1/2 X 4 Nipple 4 410 1 1/2 X 3 Nipple 1/2 411 1 1/2 X 3 Nipple 3/4 412 1 1/2 X 3 Nipple 1 413 1 1/2 X 3 Nipple 1 1/4 414 1 1/2 X 3 Nipple 1 1/2 415 1 1/2 X 3 Nipple 2 416 1 1/2 X 3 Nipple 2 1/2 417 1 1/2 X 3 Nipple 3 418 1 1/2 X 3 Nipple 4 419 1 X 6 Nipple 1/2 420 1 X 6 Nipple 3/4 421 1 X 6 Nipple 1 422 1 X 6 Nipple 1 1/4 423 1 X 6 Nipple 1 1/2 424 1 X 6 Nipple 2 425 1 X 6 Nipple 2 1/2 426 1 X 6 Nipple 3 427 1 X 6 Nipple 4 428 1 X 9 Nipple 1/2 429 1 X 9 Nipple 3/4 430 1 X 9 Nipple 1 431 1 X 9 Nipple 1 1/4 432 1 X 9 Nipple 1 1/2 433 1 X 9 Nipple 2 434 1 X 9 Nipple 2 1/2 435 1 X 9 Nipple 3 436 1 X 9 Nipple 4 437 1 X 4 Nipple 1/2 438 1 X 4 Nipple 3/4 439 1 X 4 nipple 1 440 1 X 4 Nipple 1 1/4 441 1 X 4 Nipple 1 1/2 442 1 X 4 Nipple 2 443 1 X 4 Nipple 2 1/2 444 1 X 4 Nipple 3 445 1 X 4 Nipple 4 446 Gy Bend 1/2 447 GI Bend 3/4 448 Gy Bend 1 449 GI Bend 1 1/4 450 Gy Bend 1 1/2 451 Gy Bend 2 452 Gy Bend2 1/2 453 Gy Bend 3 454 Gy Bend 4 455 clamp 1 456 clamp 1 1/4 457 clamp 1 1/2 458 clamp 2 459 1 1/4 GI Bend 1/2 460 1 1/4 GI Bend 3/4 461 1 1/4 GI Bend 1 462 1 1/4 GI Bend 1 1/4 463 1 1/4 GI Bend 1 1/2 464 1 1/4 GI Bend 2 465 1 1/4 GI Bend2 1/2 466 1 1/4 GI Bend 3 467 1 1/4 GI Bend 4 468 1 GI Bend 1/2 469 1GI Bend 3/4 470 1 GI Bend 1 471 1 GI Bend 1 1/4 472 1 GI Bend 1 1/2 473 1 GI Bend 2 474 1 GI Bend2 1/2 475 1 GI Bend 3 476 1 GI Bend 4 477 Boar Cap 1 478 Boar Cap 1 1/4 479 Boar Cap 1 1/2 480 Boar Cap 2 481 clear bottle 482 2 X 1 1/4 GI Reducer 1/2 483 2 X 1 1/4 GI Reducer 3/4 484 2 X 1 1/4 GI Reducer 1 485 2 X 1 1/4 GI Reducer 1 1/4 486 2 X 1 1/4 GI Reducer 1 1/2 487 2 X 1 1/4 GI Reducer 2 488 2 X 1 1/4 GI Reducer 2 1/2 489 2 X 1 1/4 GI Reducer 3 490 2 X 1 1/4 GI Reducer 4 491 2 X 1 1/2 GI Reducer 1/2 492 2 X 1 1/2 GI Reducer 3/4 493 2 X 1 1/2 GI Reducer 1 494 2 X 1 1/2 GI Reducer 1 1/4 495 2 X 1 1/2 GI Reducer 1 1/2 496 2 X 1 1/2 GI Reducer 2 497 2 X 1 1/2 GI Reducer 2 1/2 498 2 X 1 1/2 GI Reducer 3 499 2 X 1 1/2 GI Reducer 4 500 1 1/2 X 1 1/4 GI Reducer 1/2 501 1 1/2 X 1 1/4 GI Reducer 3/4 502 1 1/2 X 1 1/4 GI Reducer 1 503 1 1/2 X 1 1/4 GI Reducer 1 1/4 504 1 1/2 X 1 1/4 GI Reducer 1 1/2 505 1 1/2 X 1 1/4 GI Reducer 2 506 1 1/2X 1 1/4 GI Reducer 2 1/2 507 1 1/2 X 1 1/4 GI Reducer 3 508 1 1/2 X 1 1/4 GI Reducer 4 509 1 1/2 X 1 GI Reducer 1/2 510 1 1/2 X 1 GI Reducer 3/4 511 1 1/2 X 1 GI Reducer 1 512 1 1/2 X 1 GI Reducer 1 1/4 513 1 1/2 X 1 GI Reducer 1 1/2 514 1 1/2 X 1 GI Reducer 2 515 1 1/2 X 1 GI Reducer 2 1/2 516 1 1/2 X 1 GI Reducer 3 517 1 1/2 X 1 GI Reducer 4 518 2 X 1 GI Reducer 1/2 519 2 X 1 GI Reducer 3/4 520 2 X 1 GI Reducer 1 521 2 X 1 GI Reducer 1 1/4 522 2 X 1 GI Reducer 1 1/2 523 2 X 1 GI Reducer 2 524 2 X 1 GI Reducer 2 1/2 525 2 X 1 GI Reducer 3 526 2 X 1 GI Reducer 4 527 1 1/2 Hose Nipple 1 1/4 528 1 1/2 Hose Nipple 1 1/2 529 1 1/2 Hose Nipple 2 530 1 1/2 Hose Nipple 2 1/2 531 1 1/2 Hose Nipple 3 532 1 1/2 Hose Nipple 4 533 1 1/4 Hose Nipple 1 1/4 534 1 1/4 Hose Nipple 1 1/2 535 1 1/4 Hose Nipple 2 536 1 1/4 Hose Nipple 2 1/2 537 1 1/4 Hose Nipple 3 538 1 1/4 Hose Nipple 4 539 1 Hose Nipple 1 1/4 540 1 Hose Nipple 1 1/2 541 1 Hose Nipple 2 542 1 Hose Nipple 2 1/2 543 1 Hose Nipple 3 544 1 Hose Nipple 4 545 Bushing 546 Rubber Bush Coupler 547 Fiber Plate 548 Brass Elbow 1/2 549 Brass Elbow 3/4 550 Brass Elbow 1 551 Brass Elbow 1 1/4 552 Brass Elbow 1 1/2 553 Brass Elbow 2 554 Brass Elbow 2 1/2 555 Brass Elbow 3 556 Brass Elbow 4 557 Brass Tee 1/2 558 Brass Tee 3/4 559 Brass Tee 1 560 Brass Tee 1 1/4 561 Brass Tee 1 1/2 562 Brass Tee 2 563 Brass Tee 2 1/2 564 Brass Tee 3 565 Brass Tee 4 566 fillbox 567 FLANS JOINT 2 568 fillbox add 569 connector/pipe 570 gt nipple serve size 571 150/200 hp pump 572 150/200 HP Pump and other literature 573 Service Wire Three Phase 7.42/7.48 574 Sulochan Tube 575 1 Flank 576 1 1/4 Flank 577 1 1/2 Flank 578 2 Flank 579 claw base 580 leaf kit 581 Starter Button 582 Polo Tuty PVC 583 Polo Tuty CPVC 584 Fuse Roll 585 Capacitor 36 MFD 586 Capacitor 50 MFD 587 Capacitor 150 MFD 588 Capacitor 200 MFD 589 HDPE Pipe and other materials 590 The Total value of Schedule 4 591 110 mm H.D.P. Coupler 592 110 mm H.D.P. Tee 593 110 mm H.D.P. Bend 594 110 mm H.D.P. Tailpiece 595 4 Iron Philox 596 160 mm H.D.P. Coupler 597 160 mm H.D.P. Tee 598 160 mm H.D.P. Bend 599 160 mm H.D.P. Tailpiece 600 4x6 H.D.P. Reducer 601 6 Iron Philox 602 10 mm thick Nut Bolts 3 and 4 inches long 603 10 mm thick Nut Bolts 6 and 4 inches long 604 110 mm H.D.P. End Plug Cap 605 160 mm H.D.P. End Plug Cap 606 110 mm H.D.P. Pipe (per meter) 607 160 mm H.D.P. Pipe (per meter)

BRR:9690952 Tender for Item Rate Boq Boq_Ver3.0 Item Rate Normal Inr Only Inr Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Executive Engineer, Mechanical & Hospital Division Gmch Jammu. Replacement Of Gate Valves Of Different Sizes In Plumbing Section Of Govt. Smgs Hospital, Jammu Mhdj/E-Nit 334 Of 2025-26 Dated: 23.1.2026 Due : 30.01.2026 Bidder Name : Price Schedule (This Boq Template Must Not Be Modified/Replaced By The Bidder And The Same Should Be Uploaded After Filling The Relevent Columns, Else The Bidder Is Liable To Be Rejected For This Tender. Bidders Are Allowed To Enter The Bidder Name And Values Only ) Number # Text # Text # Number # Text # Number Number Text Text # Number # Text# Text # Number # Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number Number Text Text Number Number Number # Number # Text Text Number # Number # Date Number # Number # Text # Sl. No. Item Code / Make Quantity Units Estimated Rate Addition / Deduction Rate Including Gst To Be Quoted By The Bidder Rs. P Currency Convertion Against Each Item Quoted Currency In Inr / Other Currency Rebate On Old Parts In Percentage (%) If Any Excise Duty Vat Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 Iiird Party I.E Dgs&D / Rites Etc Inspection Charges @0.34%+Service Tax Less For Cenvat Credit,If Any Respect Of Supplies Under Full Excise Duty Category Net Cost Of Item Rs. P Total Amount Total Amount With Taxes Total Amount In Words , Replacement Of Gate Valves Of Different Sizes In Plumbing Section Of Govt. Smgs Hospital, Jammu. The Job Involves Dismantling Of Old/Worn-Out Gate Valves Of Different Sizes Viz. Of 2 - 3 Nos., 3 - 1 No. And 1.5 - 1 No. Installed At Different Locations Of Plumbing Section Of Govt. Smgs Hospital Jammu Using Manual Labour And Special Tools And Tackles Including Angle Cutter, Drill Machines Etc. The Job F

BRR:9690470 Tender for Hire Charges, Fitting, Fixing Of 1 No. 1000 Ltr. Capacity Pvc Water Tank Over Mechanised Van For Supply Of Drinking Water As When Required In Different Village Of Different Gps To Overcome The Drought Like Situation With Necessary Arrangement I.E. Pump With Motor, Gate Valve, Delivary Pipe, Eletric Cable,Pvc Pipes & Specials Etc. All Complete Including Labour Charges As Per Direction Of The Eic. For Ruiya Mangal Paney, Ruiya Basakpara Main Road, Ruiya Paschimpara, Patulia Malirbagan, Ruiya Purbapara Nalirmath, Patulia Santipally & Adjacent Area At Patulia Gp, Barrackpore-Ii Block Under North 24 Pgs Water Supply Division-I, P.H.E. Dte. (For 30 Days.)

BRR:9688812 Supply Of Water Supply Materials , Full Pump India Mark Ii Deep Well Hand Pump With 30 Meters (10 Nos. * 3 Mtr) Connecting Rods With Telescopic Stand And Cylinder Assembly. , India Mark Ii Extra Deep Well Hand Pump With 60 Meters (20 Nos. * 3 Mtr) Connecting Rods With Telescopic Stand And Cylinder Assembly. , India Mark Iii (Vlom) Hand Pump With 30 Meters (10 Nos. * 3 Mtr) Connecting Rods With Telescopic Stand And Cylinder Assembly. , Hand Pump Spares , Hexagonal Bolt M 12 * 40Mm Longs. , Flange Bolt Unit (1 No. M 12 * 40Mm Bolts Plus 2 Nos. Of M 12 Nuts. , 3 Hexagonal Nut M 12 , Third Plate (Additional Flange) , Front Cover , Hexagonal Bolt M 12 * 20 Mm Long. , Head Weldment (Without Cover And Third Plate) , Head With Cover And Third Plate (Including For Extra Deep Well Hand Pump) , Handle Bar Weldment (Without Above Accessories) For Mark Ii And V.L.O.M. , Handle Bar Weldment For Extra Deep Well Hand Pump , Handle Axle (S.S.) , Ball Bearing 6204 Z , Spacer (Handle) , Special Washer M 12*4 Mm Thick Galvanized , Chain With Coupling , High Tensile Hexagonal Bolt M 10 * 40 Mm , Chain Bolt Unit ( M 10 * 40 Mm Long Bolt With M 10 : Nylon Net) , Hexagonal Nylon Nut M 10 , Handle Bar Assemble Complete With Bearing Chain Coupling, Handle Axle , High Tensile Bolt, Nylon Nut & Spacer For Mark Ii And Vlom Pumps. , Handle Bar Assembly Complete For Extra Deep Well Hand Pumps , Head Assembly With Handle Assemble (Complete With Cover, Chain Coupling And Third Plate) , Raiser Pipe (B-Class – 32 Mm Nb – Galvanized Pipe) Fitted With Heavy Coupler At One End , Pipe Socket (32 Mm Nb _ Galvanizedheavy Coupler) , Water Tank ( Galvanized) For Mark Ii And Extra Deep Well Hand Pump) , Water Tank For Vlomhand Pump , Stand (Telescopic) (Gal) For Mark Ii And V.L.O.M Pumps , Stand (Telescopic) For Extra Deep Well Hand Pump , Connecting Rod M.S. (12 Mm Dia * 3 Mtr Long) , Hexagonal Coupler ( M 12 * 50 Mm Long) Electro Galvanized , Cylinder Assemble (Complete Is Withplunger Rod) For Mark Ii And Hand Pumps. , Cylinder Assembly For Extra Deep Well Hand Pump , Cylinder Assembly For V.L.O.M Hand Pump , Cylinder Body Fitted Brassliner And Reducer Cap , Reducer Cap , Upper Valve Assembly Complete Set Consisting Of Plunger Rod, Plunger Yoke Body, Rubber Seating (Small) Upper Valve Guide, Spacer, Follower & Pump Buckets. , Lower Valve Assembly Complete Set Consisting Of Check Valve Guide , Check Valve Guide, Retainer And Rubber Seating (Big) , Follower , Plunger Yoke Body , Check Valve Guide , Check Valve Seat , Rubber Seat Retainer , Pump Bucket ( Veg. Tanned Leather) , Sealing Ring ( Chrome Tanned Leather) , Rubber Seating (Small) For Upper Valve , Rubber Seating (Big) , Plunger Rod (450Mm Long) , Modified Spacer , Pump Bucket (Nit Rile Rubber Only To Be Used With Modified Spacer). , Upper Valve Guide Fitted With Rubber Seating (Small) , Sealing Ring Nit Rile Rubber , Sealing Ring Washer , Pvc Pipes ¾” 25 Mm Pvc Pipe 15 Ksc , 1 ¼” 40 Mm Pvc Pipe 6 Ksc , 1 ½” 50 Mm Pvc Pipe 6 Ksc , 2” 63 Mm Pvc Pipe 4 Ksc , 2” 63 Mm Pvc Pipe 6 Ksc , 2 ½” 75 Mm Pvc Pipe 4 Ksc , 2 ½” 75 Mm Pvc Pipe 6 Ksc , 3” 90 Mm Pvc Pipe 4 Ksc , 3” 90 Mm Pvc Pipe 6 Ksc , 4” 110 Mm Pvc Pipe 4 Ksc , 4” 110 Mm Pvc Pipe 6 Ksc , 5” 140 Mm Pvc Pipe 4 Ksc , 5” 140 Mm Pvc Pipe 6 Ksc , 6” 160 Mm Pvc Pipe 4 Ksc , 6” 160 Mm Pvc Pipe 6 Ksc , 6” 160 Mm Pvc Pipe 10 Ksc , 7” 180 Mm Pvc Pipe 6 Ksc , 8” 200 Mm Pvc Pipe 6 Ksc , Solvent Cement 1 Litre , ½ Litre , 100 Ml , Saddle Set 50 * 20 , 63 * 20 , 75 * 20 , 90 * 20 , 110 * 20 , 140 * 20 , 160 * 20 , Pvc Reducer Coupler 63 * 50 , 75 * 63 , 90 * 63 , 90 * 75 , 110 * 63 , 110 * 75 , 110 * 90 , 140 * 63 , 140 * 90 , 140 * 110 , 160 * 110 , 160 * 140 , Pvcreducer Multi Stage 90 * 63 , 110 * 63 , 110 * 75 , 110 * 90 , 140 * 90 , Pvcreducer Fabricated 75 * 63 , 90 * 75 , 110 * 90 , 140 * 110 , 160 * 140 , Pvccoupler 25 Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Pvclong Coupler 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , Pvcbend 25 Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Pvctee 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Pvc End Cap 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Pvcelbow 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Pvc M.T.A 25 Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Pvcf.T.A 25Mm , 32 Mm , 40 Mm , 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Th. Elbow 25 * 20 , 32 * 25 , R.Elbow 25 * 20 , 32 * 25 , R.Brush 25 * 20 , 32 * 25 , 40 * 32 , 50 * 40 , Half Bend 63 Mm , 75 Mm , 90 Mm , 110 Mm , S – Bend 63 Mm , 75 Mm , 90 Mm , 110 Mm , G.I. Specials – Elbow 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , G.I.Bend 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , G.I. Tee 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , G.M. Gate Valve 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , G.I.Coupler 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , G.I. Union 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , G.I. Hex – Nipple 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Air Valve 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , Flange Washer 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Flange With Bolt& Nut 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Non Return Valve 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , Heavy Bore Well Coupler 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , Repair Coupler 50 Mm , 63 Mm , 75 Mm , 90 Mm , 110 Mm , 140 Mm , 160 Mm , 180 Mm , 200 Mm , Cid Joint 80 Mm , 100 Mm , 125 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , Sulice Valve 50 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , 350 Mm , A.C. Pipe 80 Mm , 100 Mm , 125 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , 350 Mm , 400 Mm , 450 Mm , A.C Coupler 80 Mm , 100 Mm , 125 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , 350 Mm , 400 Mm , 450 Mm , Pa.Nipple 15 * 300 , 20 * 300 , 25 * 300 , 32 * 300 , 40 * 300 , 50 * 300 , 65 * 300 , 80 * 300 , 100*300 , Gi- Reducing Tee 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Gi- Reducing Elbow 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Gi – Reducing Socket 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Gi- Reducing Bush 20 * 15 , 25 * 20 , 32 * 25 , 40 * 32 , 50 * 40 , 65 * 50 , 80 * 65 , Hdpe Hose Black1” , 1 ¼” , 1 ½” , 2” , 2 ½” , 3” , Hose Green 1” , 1 ¼” , 1 ½” , 2” , 2 ½” , 3” , Hosecollar1” , 1 ¼” , 1 ½” , 2” , 2 ½” , 3” , Dummy Cap 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , Ci Tap 15 Mm , 20 Mm , 25 Mm , Gi Pipes 15 Mm , 20 Mm , 25 Mm , 32 Mm , 40 Mm , 50 Mm , 65 Mm , 80 Mm , 100 Mm , 125 Mm , 150 Mm , Red Rock Block 5 Kg , Shellac 50 Ml , 1” Blade , M – Seal , Cascade Sheet , Tafflon Tape , 500 Lit Hdpe Water Tank , 1000 Lit Hdpe Water Tank , 2000 Lit Hdpe Water Tank , 3000 Lit Hdpe Water Tank , 5000 Lit Hdpe Water Tank , 500 Lit Hdpe Water Tank Lid , 1000 Lit Hdpe Water Tank Lid , 2000 Lit Hdpe Water Tank Lid , 3000 Lit Hdpe Water Tank Lid , 5000 Lit Hdpe Water Tank Lid , Ductile Iron Socket Pipe 100 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , 350 Mm , 400 Mm , 450 Mm , Ductile Iron Flanged Pipe , 4 M Length Of Pipes 80 Mm , 100 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , 350 Mm , 400 Mm , 450 Mm , 5 M Length Of Pipes 80 Mm , 100 Mm , 150 Mm , 200 Mm , 250 Mm , 300 Mm , 350 Mm , 400 Mm , 450 Mm , Ductile Iron Specials , All Socket 100Mm - 200Mm Dia , 250Mm - 300 Mm Dia , 350Mm - 450 Mm Dia , All Flange 100Mm - 200Mm Dia , 250Mm-300Mm Dia , 350Mm - 450 Mm Dia , ½”Ferrule , ¾”Ferrule , ½”Main Cark , ¾”Main Cark , Submercible Motor Jet Clamp , 8”Bore Dummy , 1 32 Mm Pvc Pipe 15 Ksc , 1 1 Kvar Power Capacitor , 20 Lpm X 125 Mtr Isi Marked Submersible Pump Set (1.5 Hp – I Phase) , 20 Lpm X 150 Mtr Isi Marked Submersible Pump Set ( 2 Hp – I Phase ) , 50 Lpm X 175 Mtr Isi Marked Submersible Pump Set ( 5 Hp – Iii Phase) , 75 Lpm X 200 Mtr Isi Marked Submersible Pump Set( 7.5 Hp –Iii Phase ) , 75 Lpm X 225 Mtr Isi Marked Submersible Pump Set(7.5 Hp – Iii Phase) , 75 Lpm X 275 M Head 10 Hp Isi Marked Submersible Pump Set , Ms Kiosk Box Of Size0.75 M X 0.45 M X 0.75 M A. 1Hp , B. 1.5 Hp , C. 2Hp , 3 Phase Panel Board – D.O.L With 2 Level Guard & Auto Start A. 1Hp , B. 1.5 Hp , C. 2 Hp , D. 3 Hp , E. 4 Hp , F. 5 Hp , G. 6 Hp , 3 Phase Panel Board Star – Delta With 2 Level Guard & Auto Start A.6Hp , B.7.5 Hp , C.10 Hp , D.12.5 Hp , E. 15 Hp , F. 20 Hp , G. 25 Hp , 1.5Sq. Mm Flat Cable , 2.5Sq. Mm Flat Cable , 4.0Sq. Mm Flat Cable , 6.0 Sq. Mm Flat Cable , 10.0Sq. Mm Flat Cable , 16.0Sq. Mm Flat Cable , 25.0Sq. Mm Flat Cable , Yarn Bundle , Rope , Grease , 2”Upvc Pipe , 11/2” Upvc Pipe , 11/4” Upvc Pipe , 2”Upvc Adapter , 11/4”Upvc Adapter

BRR:9686562 Dismantling Brick Masonry In Cement Mortar And Removing The Debris Away From The Site As Directed By The Engineers At Site. , Dismantling Doors & Windows Including Removal Of Frames, Hinges & Fastenings, Etc. And Stacking At Site. , Supply And Fixing 50Mm Dia Pvc 6Kg/Cm2 Sewage Pipe Including Cost Of Materials Lead, Lift, Etc., Complete. , Supply And Fixing 20Mm Dia Pvc Pipe 10Kg/Cm2 For Water Supply Line Including Cost Of Specials,Labour Etc., Complete. , Supply And Fixing 110Mm Dia Pvc 6Kg/Cm2 Sewage Pipe Including Cost Of Materials Lead, Lift, Etc., Complete. , Supply And Fixing G.M Gate Valve Best Qualityisi Make Including Cost Of Materials Lead, Lift, Etc., Complete - 20Mm Dia. , Supply And Fixing 20Mm Thick Granite Slabs For Partition In Between Urinals Including Cost Of Materials Lead, Lift, Etc., Complete. , Supplying And Fixing Oriya Type Indian Water Closet 580Mm X 440Mm With P Or S Trap, White Colour Including Cost Of Materials, Lead, Lift, Labour For Fixing, Etc. Complete. , Supplying And Fixing In Position White Glazed European Water Closet With Health Faucet Of Best Quality And Approved Make With 100 Mm P Or S Trap With Health Faucet Connecting With Ci Pipe Of 100Mm Dia / Pvc Pipe Of 110Mm Dia, Double Flapped Rigid Pvc Black Seat And Seat Cover With Cp Brass Hinges Including Cost Of White Cement, Cement For Packing, Spun Yarn, Teak Wood Plugs, Brass Screws, Etc., Including Supplying And Fixing 10 Litres Capacity Pvc Low Level Flushing Tank Etc., Complete With All Fittings Such As 15Mm Brass Ball Valve With Polythene Float With Brass Handle, Union, Coupling Connected By Means Of 40Mm White Pvc Flush Hand Using Indian Adopter Joint Including All Internal Fittings..... Such As 15Mm Brass Connections, 15Mm Gm Wheel Valve, 15Mm Brass Nipple (2 Nos.), 15Mm Nylon Connection, Tw Plugs, Screws And Also Giving Necessary Connection To The Pvc Pipe Including Cost Of 600Mm Length Of 110Mm Dia Pvc Pipe And Painting With 2 Coats Of Approved Paint Over One Coat Of Red Oxide Primer, Dismantling The Masonry And Re-Doing The Dismantled Masonry To Original Condition Etc. Complete Complying With Standard Specifications. , Supplying And Fixing Of Lipped Mouth Porcelin Flat Back Urinal With All Accessories Such As 32 Mm Dia Bell Mouth Pvc Connection,15 Mm Dia Gm Wheel Value, 15Mm Dia B Class Gi Waste Pipe,15Mm Dia Brass Nipple, Urinal Push Valve Etc. Complete. , Suplying And Fixing Wash Hand Basin Of Size 550Mm X 400Mm With All Accessories Such As Cast Iron Brackets, 32Mm Dia Cp Waste Coupling, Rubber Plug And Chain, 32Mm Dia B Class Gi Waste Pipe, 15Mm Dia Gm Wheel Valve, 15Mm Dia Nylon Connection, 15Mm Dia Brass Nipples, 15Mm Cp Pillar Tap, Mirror And Soap Tray, Etc. Complete. , Supply And Fixing Screw Down Pvc Bib Cock Of Best Quality Including Cost Of Materials Lead, Lift, Etc., Complete. , Brickwork In Cm 1:5 Mix Using Iind Class Chamber Burnt Brick Of Size 9X 4?X 2¾ Including Cost Of Materials, Labour, Lead, Lift, Curing Etc,Complete. , Supplying And Fixing Anodised Aluminium Ventilators Of Size 50Cmx45cm Louver Type Asper Standard Specification With Approved Section For Frame And Glass 4Mm Thick Including Cost Of All Materials, Labour, Lead, Lift Etc Complete. , Supply And Fixing Of Ac Exhaust Fan 300Mm (12) Sweep (Light Duty) Complete. , Plastering With Cement Mortar1:3,12Mm Thick For Ceiling Including Cost Of All Materials,Super Plasticizer, Lead, Lift,Scaffolding Charges Etc Complete. , Supply And Fixing Solid Panel Pvc Door With Frame Including Cost Of Materials Lead, Lift, Etc., Complete. , Laying Flooring With First Quality Ceramic Tiles Of Size 305 X 305 X 6Mm With Cm 1:2, 20Mm Thick For Toilet Floors After Chipping And Roughtening The Surface Of The Existing Mosaic Tiles. , Dadooing Walls With Colour Designed Glazed Tiles 300 X 200 X 6Mm Premium Quality In Cm 1:2, 10Mm Thick After Chipping And Roughtening The Existing Osaic Tiles Including Cost Of Materials, Lead, Lift, Labour For Laying Fixing And Finishing Neatly As Per Standard Specification As Directed By The Engineer At Site. , Supply And Fixing 100X50mm Pvc Floor Trap With One Pvc Door,Bend, Shoe Of 50Mm Dia Including Cost Of Materials Lead, Lift, Etc., Complete. , White Washing Two Coats For Inside Wall & Ceiling Including Cost Of All Materials, Lead, Lift Scaffolding Charges Etc Complete. , Providing Pcc1:3:6 Using Op/Pp Cement With 20To 12 M Machine Crushed Hbg Metal Including Cost Of All Materials ,Labours ,Lead ,Lift ,Curring ,Etc.Complete-For 10Cum , Supply And Fixing Hand Rail For Disabled Persons Using 1¼ B.Classg.I Pipe For Horizondal And Verticals As Per Drawing And Specification Including Cost Of Material , Labour, Lead, Lift Etc Complete. , `Painting Two Coats With Ready Mixed Enamel Paint For The New Steel Surface With Primer Including Cost Of All Materials, Scaffolding Charges, Labour, Lead Lift Curing Etc. Complete. , Supply And Fixing Pvc Water Tank Isi Make -1000 Litre Capacity.

BRR:9682983 Bids Are Invited For Cs Bolted Bonnet Size: 8 Inch, 200 Nb , Cs Bolted Bonnet Size: 6 Inch, 150 Nb , Cs Bolted Bonnet Size: 4 Inch, 100 Nb , Cs Gate Valve As Per Api 602 Total Quantity : 12

BRR:9680996 Bids Are Invited For Trainer On Basic Digital Electronics I E Logic Gates , Trainer On Power Suppliers Half Wave Rectifier , Scr Driven Or Controlled Power Supply Trainer , Potentiometer Or Thermocouple Test Set , Auto Transformer , Calibration Test Bench For Ac And Dc Voltmeter , Bourdon Tube Type Gauges Of Various Ranges , Dead Weight Tester And Comparator , Differential Pressure Transmitter Electronic- Hart Or Field Bus Type , Pressure Transducers Training Kits , Experimental Set Up For Pressure Measurement , Hart Device Communicator And Calibrator , Pneumatic Calibrator , Pressure Switches Of Various Ranges , P To I Converter And I To P Converter , Vacuum Tester With Pump , Simple Tank Quantity Meter , Impeller Type Flow Meter , Helical And Turbine Flow Meter , Magnetic Flow Meter , Vortex Flow Meter , Flow Control Loop Set With Flow Controller Recorder , Experiment Closed Loop Set Up Solid Flow Measurement And Control , Corioils Mass Flow Meter , Flow Nozzle , Static Pressure And Air Type Purge Type Level Indicator , Level Transmitter Interface Hart Compatible , Level Control Set Up With Transmitter And Level Recorder , Level Measurement Eequipments For Solid , Experimental Set Up For Measuring And Controlling Of Temperature , Paper Less Lcd Or Led Recorder Setup , Real Pid Controller Trainig Kit , Programmable Logic Controller , Hart Or Filed Devices , Hydrauilc Actuators , Different Type Of Control Valves Such As Gate Valves , Valve Positioner , Hart Or Filed Bus Final Control Elements , Data Acquisiton Syastem , Adc To Dac Cards , Digital I Or O Cards , Conductivity Meter And Tds Meter , Experimental Set Up For Online Conductivity Measurement , Experimental Set Up For Online Ph Measurement , Experimental Set Up For Online Dissolved Oxygen Measurement Total Quantity : 114

BRR:9680936 Bids Are invited for Kitchen Sink Ss 1Mm Thick Without Drainage Board Overal Size 495 X 420Mm With Bowl Size 410Mm X 300Mm X 160Mm Isi Marked , Kitchen Sink Ss 1Mm Thick Without Drainage Board Overal Size 495 X 420Mm With Bowl Size 410Mm X 300Mm X 160Mm Isi Marked , Kitchen Sink Ss 1Mm Thick With Drainage Board Overal Size 915Mm X460mm With Bowl Size 410Mmx330mm X160mm Isi Marked , Kitchen Sink Ss 1Mm Thick With Drainage Board Overal Size 915Mm X460mm With Bowl Size 410Mmx330mm X160mm Isi Marked , Kitchen Sink Ss Without Drainage Board Size 24 Inch X 20 Inch Isi Marked , Waste Pipe Pvc 32 Mm Dia X 800Mm Long Isi Marked , Waste Pipe Pvc 32 Mm Dia X 800Mm Long Isi Marked , Waste Pipe Pvc 32 Mm Dia X 800Mm Long Isi Marked , Plastic Seat Cover For Ewc White Isi Marked , Plastic Seat Cover For Ewc White Isi Marked , Plastic Seat Cover For Ewc White Isi Marked , Spindle For Bib Cock 20Mm Isi Marked , Spindle For Concealed Stop Cock 20Mm Isi Marked , Bottle Trap 32Mm , One Piece Syphon Kit 8 Inch , Waste Coupling With Washer Cp Brass 40 Mm Isi Marked , Waste Coupling With Washer Cp Brass 40 Mm Isi Marked , Gate Valve Brass 15Mm With Iron Wheel Head Screwed Both End For Iron Pipe And Fixed Isi Marked , Gate Valve Brass 15Mm With Iron Wheel Head Screwed Both End For Iron Pipe And Fixed Isi Marked , Gate Valve Brass 15Mm With Iron Wheel Head Screwed Both End For Iron Pipe And Fixed Isi Marked , Jet Spray With Connection Pipe Isi Marked , Jet Spray With Connection Pipe Isi Marked , Jet Spray With Connection Pipe Isi Marked , Pvc Connection Pipe 15Mm X 300Mm Long Isi Marked , Pvc Connection Pipe 15Mm X 450Mm Long Isi Marked , Pvc Connection Pipe 15Mm X 450Mm Long Isi Marked , Pvc Connection Pipe 15Mm X 450Mm Long Isi Marked , Pvc Connection Pipe 15Mm X 600Mm Long Isi Marked , Pvc Connection Pipe 15Mm X 600Mm Long Isi Marked , Pvc Connection Pipe 15Mm X 600Mm Long Isi Marked , Corner Glass Shelf Size 12 Inch With Cp Railing Isi Marked , Corner Glass Shelf Size 12 Inch With Cp Ra

BRR:9680867 Bids Are Invited For 80 Nb Size Cast Carbon Steel Gate Valve , 80 Nb Size Cast Carbon Steel Globe Valve , 80 Nb Size Forged Carbon Steel Swing Type Check Valve , 50 Nb Size Forged Carbon Steel Gate Valve Total Quantity : 34

BRR:9679797 Bids Are Invited For Copper Alloy Gate Valve For Waterworks Purpose (V2) Conforming To Is 778 , Copper Alloy Taps/Stop Valves (V2) Conforming To Is 8931 , Health Faucet , Bathroom Water Shower (V2) , Waste Fittings For Washbasin And Sinks As Per Is 2963 , Ball Cock With Rod And Ball 15Mm Float Valve , Ball Cock With Rod And Ball 20Mm Float Valve , Ball Cock With Rod And Ball 25Mm Float Valve , Gi Pipe 25Mm , Gi Pipe 40Mm , Gi Pipe 50Mm , Gi Pipe 80Mm , Bathroom Shelf Chromium Plated Of Sheet Glass With Bracket Corner , Brass Spindle 3 No For Bib Tap , Ewc Seat Cover Plastic With Fitting , Gi Elbow 20Mm , Gi Pipe 15Mm , Gi Pipe 20Mm , Gi Union 20Mm , Gi Wiremesh Of Standard Width Each Roll 15 Mtrs , Glass 3Mm , Glass 4Mm , Glass 5Mm , Kitchen Plate Rack Rectangular Stainless Steel Of Size 24Inch By 24Inchby 10Inch , Kitchen Plate Rack Rectangular Stainless Steel Of Size 31Inch By 36Inch By 10Inch , Kitchen Sink Size 3Feet By 1.5Feet Bowl Size 1.35Feet By 1.08Feet By 0.52Feet Drainage Ss 1Mm , Ms Wire Mesh Of Standard Width As Per Sample , Peg Set Of Six , Pvc Connections 15Mm Size With Ptmt Nuts Of Length 450Mm , Pvc Connections 15Mm Size With Ptmt Nuts Of Length 600Mm , Pvc Connections 15Mm Size With Ptmt Nuts Of Length 900Mm , Ready Mix Plaster , Shower Rose 125Mm Chromium Plated , Toilet Seat Box Rim Type European Pattern 1 S Trap , Toilet Seat Open Rim Type European Pattern 1 P Trap , Towel Rack Chromium Plated , Towel Rail 600Mm Long Of Chromium Plated , Towel Rail 600Mm Long Of Ptmt , Towel Rail 900Mm Long Of Chromium Plated , Towel Ring Of Chromium Plated , Wash Basin, Vitreous China Flat Back Or Angle Back Type , Waste Pipe 32 By 750Mm Pvc Total Quantity : 3604

BRR:9679651 Bids Are Invited For Copper Alloy Taps/Stop Valves (V2) Conforming To Is 8931 , Bathroom Or Toilet Mirror (V3) , Health Faucet , Glass Plane 4 Mm Thick , Water Storage Tank Cover Oblique Lid Pvc For 500 Ltr Tank , Water Storage Tank Cover Oblique Lid Pvc For 1000 Ltr Tank , White Cement , Float Valve Pvc 15 Mm With Pvc Float , Pvc Waste Pipe 32 Mm X 750 Mm Long , Gi Tubing 20 Mm Med Gde , Towel Rail 900 Mm Long, 20Mm Dia, Cp , Towel Rail 600 Mm Long, 20Mm Dia, Cp , Towel Rail 450 Mm Long, 20Mm Dia, Cp , Glass Putty , Ptmt Pvc Connection Pipe 15 Mm 600Mm , Gi Tubing 100 Mm Med Gde , Gi Tubing 40 Mm Med Gde , Gi Nipple 20X600 Mm , Glas Corner , Pvc Low Level Flushing Systern 10 Ltrs Capacity , Pillar Cock Pvc 15 Mm , Doorstoper , Hydraulic Door Closer , Curtain Rod Bracket 25 Mm Dia Ss , Curtain Rod 25 Mm Dia Ss , Float Valve 20 Mm , Towel Ring Cp , Gate Valve 50 Mm , Gate Valve 20 Mm Total Quantity : 3820

BRR:9703338 Bids Are invited for Plate Mending , Lock Nut Drive Sprocket , Rear Sprocket , Rear Chain 58 X38 94 Piches , Disc Front Brake , Absorber Assy Rear Shock , Rotary Switch Pto , Fuel Pump Motor , Disc Front Brake , Clutch Release Bearing , Gear Lever Top Kit , Cross Assy , Regulator Engine Generator , Weather Strip Back Door Opening Total Quantity : 20

BRR:9702924 Bids Are invited for Valve Assly 3Inch Ansi 600 Smart Set Vlv Intnls Inlet Dia55 Vx91vx0100 01 , Valve Internal Assly 104058 , Valve Disc And Stem Assly Inlet Dia55 1040581 , Valve Seat Assly Inlet Dia55 14040582 , Valve Stem Guide Assly 1040583 , Disc Pressure Ctrl Valve Stem Guide Assly Be 857 , Spring Valve Valve Intnl Assly Be 893 , Nut Adjusting Valve Intnl Assly Be 860 , Key Horseshoe Valve Intnl Assly 3320 , Lock Plate Weldment Be 866 , Vent Valve Assly 6518 , Elbow Equal Valve Assly 5388 , Chain Pinion Pi 23300 , Gearbox Drive Sprocket Pl 23838 , Neck Ring 37 42 Mm Feed Tube Ri 22148 , Packing Ring 37 42 Mm Feed Tube Ri 22150 , Feed Tube Packing Pa 22149 , Operating Nut Nu 23235B , Operating Nut Or Leadscrew Nu 23646 , Thrust Bearing Bbtbb204014 , Thrust Bush Bu 23606 , Spur Gear Sg 23272 , Spur Gear Sg 23275 , Blower Carriage Trigger Pin Pi 24051 , Copper Joint Jjodb1185135 , Lubricating Nipple Slnxg14 , Lance Roller Support Assly Cold End 1Ls K24708 , Lance Roller Support Assly Hot End 1Ls K24019 , Cl14 Clip Cliprollsupp Fh E3 , Spring Sp 23339 , Seal Ring Ri 23340A , 3 By 4 Inch Duplex Chain Fchga34d , Chain Connecting Link Fclga34d , Valve Operating Mechanism 1Vm K 23332A , Lance Tube Steam Hpw Cold End 114880 L , Blowing Tube Steam Hpw Cold End114880 L 1 , Feed Tube Steam Hpw Cold End Tu 24157 , Steam And Lpw Lance Tube Hot End 114880 L 2 , Blowing Tube Steam Lpw Hot End 114880 L 3 , Blowing Tube Water Lpw Hot End 114880 Lpwl 3 , Feed Tube Steam Lpw Hot End Tu 23612 , Split Rings Ri 22072 , Copper Joint Jo 22079 , Lance Tube Joint Jo 22668 , Counter Flange Gasket 132958 Total Quantity : 74

BRR:9697760 Supply Of Drive Sprocket, Intermediate Driven Teeth- 19, Teeth- 16 & Jockey Sprocketdrive Sprocket, Intermediate Driven Teeth- 19, Teeth- 16 & Jockey Sprocket,Drive Sprocket On Gear Box Output Shaft, Pitch-1.5 Inch,Teeth-16 Nos., Pcd- 195.00 Mm, Make-Not Applicable. [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Intermediate Driven Sprocket , Pitch-1.5 Inch,Teeth-19 Nos., Pcd- 231.48 Mm, Make-N Ot Applicable. [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Intermediate Drive Sprocket , Pitch-1.5 Inch,Teeth-16 Nos., Pcd- 195.00 Mm, Make-No T Applicable. [ Warranty Period: 12 Months After The Date Of Delivery ] ] , Jockey Sprocket , Pitch-1.5 Inch,Teeth-13 Nos., Pcd- 157.65 Mm, Make-Not Applicable. [ Warranty Period: 12 Months After The Date Of Delivery ] ] => Limited

BRR:9693961 Bids Are Invited For SUPPLY OF FLARING UNIT MANUAL 6 HEAD ONLINE , SUPPLY OF VALVE OPENING UNIT MANUAL ONLINE HYDRAULIC 3 HP FLP , SUPPLY OF DEGASSING UNIT 5 HEAD AUTO PLC BASED ONLINE CLOSED LOOP , SUPPLY OF CHAIN CONVEYOR WITH ALL SECTIONS LEG SUPPORTS HAND RAILING DRIVE SHAFTS SPROCKETS SHAFTS BEARINGS SOAP TRAY CHAIN COUNTER WEIGHTS , SUPPLY OF DRIVE UNITS 5 HP NORD MAKE HOLLOW SHAFT GEAR UNIT WITH FLP MOTOR FLP PUSH BUTTON WITH STAND , SUPPLY OF CAUSTIC SODA WASHING TANK S.S 1.5x1.2x1.0 MTR 3 MM THICK , SUPPLY OF WATER WASHING TANK MS 1.5x1.2x1.0 MTR 6 MM THK , SUPPLY OF HYDROTESTING UNIT 10 HEAD NON TILTING INDIVIDUAL Pr.GAUGE WITH ISOLATION VALVE BOTTOM MIRROR WITH ROVS SIGHT FLOW INDICATOR AIR AND WATER VESSELS WATER PUMPS , SUPPLY OF INTERNAL CLEANING VACCUM CLEANER 3 HP WATER COLLETION TANK , SUPPLY OF OVER HEAD CONVEYOR , SUPPLY OF CATERPILLAR DRIVE UNIT 5 HP , SUPPLY OF OVEN 2.5 x 1.5 x2.5 MTR 15 KW , SUPPLY OF PRIMER PAINT BOOTH WATER CURTAIN 5 HP BLOWER 25 LTR PRESSURISED FEEDER TANK SPRAY GUN HOSES , SUPPLY OF FINISH PAINT BOOTH WATER CURTAIN 5 HP BLOWER 25 LTR PRESSURISED FEEDER TANK SPRAY GUN HOSES , SUPPLY OF VALVE TIGHTENING ONLINE HYDRAULIC 3 HP , SUPPLY OF CHECK SCALE 100 KG CAPACITY ELECTRONIC JISL , SUPPLY OF TARE WT PUNCHING HYDRO PNEUMATIC , SUPPLY OF HIGH PRESSURE COMPRESSOR 15 KG PRESSURE , SUPPLY OF PNEUMTIC TESTING 5 HEAD ONLINE AUTO PPLC BASED , SUPPLY OF G.I BOTTOM CONVEYOR TRAY OF 1.6 MM THK , SUPPLY OFSERVICE WATER PIPE LINE 1.5 INCH WITH FLANGES BENDS COLLARS BALL VALVES , SUPPLY OF SERVICE AIR PIPE LINE 1 INCH WITH FLANGES BENDS COLLARS BALL VALVES , ERECTION AND COMMISSIONING OF FLARING UNIT MANUAL , ERECTION AND COMMISSIONING OF VALVE OPENING UNIT MANUAL , ERECTION AND COMMISSIONING OF DEGASSING UNIT , ERECTION AND COMMISSIONING OF CHAIN CONVEYOR , ERECTION AND COMMISSIONING OF DRIVE UNITS 5 HP , ERECTION AND COMMISSIONING OF CAUSTIC SODA WASHING TANK , ERECTION AND COMMISSIONING OF WATER WASHING TANK , ERECTION AND COMMISSIONING OF HYDROTESTING UNIT 10 HEAD , ERECTION AND COMMISSIONING OF INTERNAL CLEANING VACCUM CLEANER , ERECTION AND COMMISSIONING OF OVER HEAD CONVEYOR , ERECTION AND COMMISSIONING OF CATERPILLAR DRIVE UNIT 5 HP , ERECTION AND COMMISSIONING OF OVEN 2.5 x 1.5 x2.5 MTR 15 KW , ERECTION AND COMMISSIONING OF PRIMER PAINT BOOTH , ERECTION AND COMMISSIONING OF FINISH PAINT BOOTH , ERECTION AND COMMISSIONING OF VALVE TIGHTENING , ERECTION AND COMMISSIONING OF CHECK SCALE , ERECTION AND COMMISSIONING OF TARE WT PUNCHING , ERECTION AND COMMISSIONING OF HIGH PRESSURE COMPRESSOR , ERECTION AND COMMISSIONING OF PNEUMTIC TESTING , ERECTION AND COMMISSIONING OF G.I BOTTOM CONVEYOR TRAY , ERECTION AND COMMISSIONING OF SERVICE WATER PIPE LINE 1.5 INCH , ERECTION AND COMMISSIONING OF SERVICE AIRLINE PIPE LINE 1 INCH , DISMANTTLING OF CHAIN CONVEYOR , DISMANTTLING OF DRIVE UNITS , DISMANTTLING SHIFTING AND RELOCATION OF VALVE TIGHTENING Machine , DISMANTTLING SHIFTING AND RELOCATION OF CHECK SCALE , DISMANTTLING SHIFTING AND RELOCATION OF TARE WT PUNCHING , DISMANTTLING SHIFTING AND RELOCATION OF HIGH PRESSURE COMPRESSOR , DISMANTTLING SHIFTING AND RELOCATION OF PNEUMTIC

BRR:9707460 Supply Of Safetop Bump Cap(Shortsafetop Bump Cap(Short,Safetop Bump Cap(Short Peak), Color: Navy Blue With Following Specifications. 1.Bump Ca P With Integrated Shock Absorbing Elements For Protection Against Impacts, 2. Lightweight Construction Wit H Maximum Wearer, 3. Outer Material Poly Cotton, 4. Color Fluorescent Green With Reflective Tape Comfort, 5. Ergonomically Shaped With Flexible Curve Sides Shell, 6. Inner Shell Made Of Abs With Comfort Padding, 7. Velcro Closure For Tight Fit, 8. Tested And Marked In Accordance To En 812: 2012, 9. Weight: 200Gm. [ Warr Anty Period: 30 Months After The Date Of Delivery ] ]

BRR:9706783 Bids Are Invited For Custom Bid For Services - Spraying Of Water For Dust Suppression Through Water Tanker In Coal Transportation Road From Railway Siding No 05 To Seam -Ii Via Under Pass Cement Concrete Road Via Triveni Chhak Of Anant Ocp, Ja For A Period Of One Year

BRR:9705240 Bids Are invited for Camshaft Roller Chain , Asm Caliper Brake Rear Lh , Oil Filter , Gasket Tensioner , Seal Flange , Seal Caliper Inner 1 375 Inch , Square Ring Molded Point 094 , Square Ring Molded Point 103 X Point 134 , Cv Joint Total Quantity : 17

BRR:9705073 Bids Are Invited For Truck Mounted Fog Cannon / Anti Smog Gun / Dust Suppression System Total Quantity : 2

BRR:9704511 Supply Of Filter Paper Roll For Grinding Machinesfilter Paper Roll For Grinding Machines,Filter Paper Roll For Grinding Machines Length 100 Mtrs X 1000Mm Width,Non Wo Ven, Cellulose To Filter 30 To 50 Micron Particles,Weight Of Paper 50 Gms/Square Mtrs. ] => Limited

BRR:9703944 Bids Are Invited For Gear Pump, Viking, Gp0711g00, Vgo Chrg Pmp , Spares For Tripper And Apron Feeder Total Quantity : 4

BRR:9703835 Bids Are Invited For 6Kg Dcp Fire Extinguisher (Stored Pressure Type) , Fire Extinguisher’ S Inspection Tag , Fire Extinguisher’ S Floor Stand , Spares For 6Kg Dcp Extinguishers , Spares For Tripper And Apron Feeder Total Quantity : 10010

BRR:9702846 Bids Are Invited For Facility Management Services - Lumpsum Based - Industrial; Changing Of Spares Of Apron Feeder Of Package B And Steel Structural Work; Consumables To Be Provided By Service Provider (Inclusive In Contract Cost)

BRR:9702712 Bids Are Invited For Cable Drag Chain Set-1 , Cable Drag Chain Set-2 , Simplex Roller Chain Total Quantity : 2

BRR:9702645 Bids Are Invited For Custom Bid For Services - Spraying Of Water Through Water Tanker For Dust Suppression

BRR:9701807 Bids Are Invited For Truck Mounted Fog Cannon / Anti Smog Gun / Dust Suppression System Total Quantity : 1

BRR:9699197 Tender For Provision Of Deficient Md Accommodation For Dsc At Borgad Under Ge (Af) Ojhar.; 10 SCH A PART XI (MISC B/R & E/M ITEMS) Note:- Excavation and earthwork to the extent required for execution of relevant item under this schedule unless otherwise specified shall be measured and paid under relevant items of Schedule A Part-II. 11 INTERNAL WATER SUPPLY 12 Supply and fixing Health Faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia fixing in pipe with 1.25 meter long flexible tube and ABS wall hook including making connection and fixed to 15 mm bore complete all as specified and as directed. 13 Supply and fixingangle valve of cast coper alloy chromium plated fancy type screwed down high pressure with crutchor butterfly handle screwed both ends for cpvc pipe or for unions and fixed to 15 mm diabore (concealed) complete all as specified and directed. 14 Supply and fixing 15mm dia. size Two way Bib taps, fancy type,,cast copper alloy with crutch or butterfly handle screwed down for CPVC pipe or for brass ferrule and fixed complete all as specified and as directed. 15 Supply and fixingBrass CP Mixer for mixing hot & cold water screwed down for CPVC Pipe of 15 mm dia bore and fixed all as specified and as directed. 16 INTERNAL ELECTRIFICATION 17 Supply and fixing switch modular type,2 module, 20 A DP Switch with indicator230 volts one way complete all as specified and directed.( For Acs) 18 Supply and fixenergy efficient LED lamp 5 watt capacity complete all as specified and directed 19 Supply and fixing energy efficient 20 watt (4.0 feet)LEDintegrated batten type luminairessuitable for wall or ceiling mounting with built in LED Chip & integral LED driver 20 watt,Aluminiumchannel housing & Polycarbonate diffuser of length 1200 mm (approx.),Color temperature 6500 K or as directed, CRI between 80-85,Low THD,PF-0.90(mimium),efficacy not less than 100 lumen/watt or total lumen output not less than 2000 lumen per 20 watt, operating range 200-270V ,surge protection of 2 kV,over voltage protection and other safety tests as per IS 15885 Part-2/Part-3,estimated life span of 25,000 hrs with all accessories, complete with fixing arrangement, fitting shall be internally prewired and conforming to LM 79 & LM 80 standard, making all connection using 1.5 sqmm copper conductor multistrand PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting complete all as specified and directed by Engr–in-charge.Note: (i) LED fitting shall be provided for 3 years warranty. (ii) Location for Installation of LED fitting shall be as per approved drawing) 20 Supply and fixing energy efficient 10/12 watt (2.0 feet)LEDintegrated batten type luminairessuitable for wall or ceiling mounting with built in LED Chip & integral LED driver 10/12 watt,Aluminiumchannel housing & Polycarbonate diffuser of length 600 mm (approx.),Color temperature 6500 K or as directed,efficacy not less than 100 lumen/watt or total lumen output not less than 1000 lumen per 10 watt, operating range 200-270V ,surge protection of 2 kV,estimated life span of 25,000 hrs with all accessories, complete with fixing arrangement, fitting shall be internally prewired and conforming to LM 79 & LM 80 standard, making all connection using 1.5 sqmm copper conductor multistrand PVC insulated 3 core flexible cable from ceiling rose to fitting drawn through PVC flexible conduit complete fixed in position & connecting complete all as specified and directed by Engr–in-charge. Note:(i) LED fitting shall be provided for 3 years warranty. (ii) Location for Installation of LED fitting shall be as per approved drawing. 21 Supply and fixing LED Bulk Headtype with high out put , 10 watt ,220 V AC,Color temperature 6500 K or as directed,or as directed,efficacy not less than 100 lumen/watt or total lumen output not less than 1000 lumen/10 watt, estimated life span of 50,000 hrs with all accessories, complete with fixing arrangement, fitting shall be internally prewired and conforming to LM 79 & LM 80 standard ,IP 65 protection dust and water resistant ,surge protection up to 2.5kV, PC opal high efficiency diffuser , die cast aluminium housing with complete assembly, suitable for surface/wall mountedwith driver holder including connecting up using 1.5 sqmm copper conductor multistarnd PVC insulated with three core flexible copper conductor cable of suitable sizecomplete all as specified and directed. 22 Supply and Fix distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with appropriate Amps rated copper busbar, neutral bar,internalearth bar and cable ties for cable management,reversible door forIP 43 & IP 54,IK 09 impact resistance, single pole and neutral 250 Volts, flush to wall including chasescutting in wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed.DB shall be designed with provision for MCB SPN as incomer &MCB SP as outgoing as per requirement. Cost of the DBs will be without MCBs complete all as specified and as directed .Note - Rates are inclusive for flush(Concealed ) mounting of DB SPN . 23 Supply and fixVerticalTPN distribution board (DB), double door type, as per as per IS 8623- 1 & 3 / IEC 61439- 1 & 3. made out of sheet metal enclosure (CRCA sheet) dust and vermin proof , TPN 4 way with inbuiltMCCB 125 amp 4 pole as incomer,suitableAmps rated copper busbar, 415 Volts suitable for TPN MCB/ 4 pole Isolator, 2 neutral bar and 2earth bar and blanking plates, IP 54 protection, IK 09 impact resistance, with detachable gland plate, terminal connectors and other required hardware & fasteners cable ties for cable management(Fully insulated busbar and shrouded neutral bars),reversible door for IP 43 & IP 54 ,flush mounted to wall complete.DB shall be designed with provision for MCCB as incomer & SP / SPN MCB as outgoing as per requirement. Cost of the DBs will be with MCCB complete all as specified and as directed.Note : Rates are inclusive for flush(Concealed ) mounting of Vertical DB TPN . 24 Supply and fixing 1200 mm sweep,BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos.blades, 30 cm long down rod/down rod as per height available at site , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.0,Air delivery minimum 210 CMM,350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm,suitable for 230 V, 50 Hz, single phase AC Supply etc , complete with fixing arrangement anchor tpe fastener hook including connection with 1.5 sqmm mutistrand copper conductor flexiblewire from ceiling rose to fan drawn through PVC flexible conduit complete including taking down old and deposited to MES store yard all as specified and directed. 25 Supply and Fix Exhaust Fanmade of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm( for toilet),06 nos blades,with guard,opaque finish Aerodynamically designed & Blanced Blades,860 m³/h air delivery,Noise level less than 44db complete with outside louvers withnecessary fixing arrangment and making good to disturbed surface complete all as specified and directed . 26 Supply and Fix Exhaust Fanmade of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm( for kitchen),06 nos blades,with guard,opaque finish Aerodynamically designed & Blanced Blades,860 m³/h air delivery,Noise level less than 44db complete with outside louvers withnecessary fixing arrangment and making good to disturbed surface complete all as specified and directed . 27 Supply and fixing LED building security Light fitting 60 watt, for opearting voltage between 140V to 270V system luminious efficacy not less than 100 lumen / watt ,PF-0.95 minimum, IP65/66 & IK 08 class ofprotection, 5700CCT(K),CRI between 80-85,confirming to LM79 and LM 80 standards or as per IS-16104:2012 and IS-16106:2012,for estimated life span ofminimum 50,000 hrs consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits SMPS based constant current supplywith phase to phase protection,over voltage protection , surge protection and other safety tests as per IS 15885 Part-2/Sec13, Low THD, PMMA grade high quality Transmittance lens, LED street optics LENS for uniform light distribution,weather proof gasket for lamp & driver compartment, Heat resistance toughened UV stabilized glass fitted in pressure die cast aluminium housing with SS screws with IP 65/66 protection, complete all as specified and asdirected by Engr-in-charge.Note: (i) LED fitting shall be provided for 3 years warranty. (ii) Location for Installation of LED fitting shall be as per approved drawing) 28 Supply,installation ,testing and commissioning of storage typeelectric water heater 25 Ltrs capacity , AC 240 volt, 50 Hz, 5 star rated, vertical wall mounting type made out of CRCA outer body, stainless steel storage tank, titanium enamelled heating element, thermostate, thermal cutout, glass wool incl 15mm, 450 mm long (cold water pipe) with copper cuch and 15mm 450 mm long armourd pipe (hot water pipe ) etc. complete including making necessary electrical and water connections with 2.5 sqmm 3 core copper (multistranded) cable with top indicator plug top 15 amp from geyser connnection to socket incl hold fast for fixing of new geyser and writing the MES No etc complete as specified and directed by Engr in charge. Note: (i) Cutting of wall and making good of disturbed surface in wall/roof shall be deemed to be included in the quoted rates. (ii) Wiringshall be independent from main DB to power socket located near the geyser whereas the controlled switch shall be placed outside the bath room shall be deemed to be included in quoted rates. 29 EXTERNAL WATER SUPPLY 30 Material and labour for construction of valve chamber of size 600x600mm deep dimensions (Over all internal dimension) with PCC Foundation,random rubble uncoarsed brick masonry walls, Plastering, PCC coping, white washing, mild steel chamber cover, painting to chamber cover including excavation and earthwork in any type of soil complete all as specified below : -Valve chamber shall be provided with the following specifications :-(i) Cement concrete for foundation (1:4:8) type D2 using 40 mm graded stone aggregate 150mm thick extnded up to 150mm beyond the outer face of brick masonry.(ii) Walls of valve chamber 23mm thick with precast cement concrete (1:5:8) (using 20mm graded stone aggregate) using brick masonry setting in CM 1:6 complete.(iii) Internal and exposed surfaces of valve chamber both concrete and brick masonry surface shall be plastered with CM(1:4), 15mm thick finished even and smooth. (iv) 50mm thick coping in PCC 1:3:6 type C1 over brick masonry wall.(v) Entire plastered surfaces shall be treated with 3 coat of white wash. (vi) Chamber cover shall be of 3.15mm thick MS sheet with 40x40x6mm size angle iron frame with hold fast and locking arrangement.Steel surface shall be painted with two coats of synthetic paint of fist quality over one coat of red oxide primer complete all a specified and as directed by Engr-in-Charge. 31 EXTERNAL ELECTRIC SUPPLY 32 Material and Labour for boring of holes under road, pavement, runway, taxi track, hard standing by trenches technology using ultrasound technique and necessary machine including HDPE pipe of 150 mm nominal dia PE 80 grade 0.4 Mpa working pressure for cable protection complete all as directed. Note : HDPE pipe shall be laid min 90 cm below the surface. 33 Material and Labour for Earthing complete with galvanised steel earth electrode plate of size 600x600x6mm thick, buried directly in ground(earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.50m below normal ground level, connected to galvanised iron strip of size 32 x 6 mm as earth lead up to test point with suitable GI nuts/bolts and brazed properly up to main board including earth pit in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregates,40mm thick precast RCC cover in 1:2:4 reinforced with expanded metal(weight not less than 4 kg/sqm), and frame of angle iron 25x25x6mm with lugs 02 nos with 6mm dia MS bar handle made to shape, excavation and earth work in any type of soil and including medium grade GI watering pipe 20mm bore with funnel andwire mesh and medium grade GI earth wire protection pipe 40mm bore up to main board complete as shown in electrical plate no 3 of MES schedule Part-I , connected to earthing testing point and testing on completion complete all as specified anddirected by Engr-in-charge. Note: (i) The unit rate includes GI pipe up to 7.5m for protection of earth lead. For any additional length the same shall be adjusted through deviation order.(ii) The unit rate includesmain earthing lead/strip from earth electrode to test point up to 7.5 meter. (iii) In case measured value of earth resistance is recorded more than 1.0 ohms then the earthing shall be re done by the contractor without any extra cost to the department. 34 Supply,installation,testing and commissioning of LT Feeder pillar outdoor type confirming of IS 5039, CPRI approved, totally enclosed vermin proof suitably ventilated for 3 phase,wire 415 Volts, 50 Hz, AC supply, outer sheet shall be made out of 3.15mm thick CRCA sheet & MS angle section of suitable size for frames, factory fabricated, compartmentalized inner shell shall be made of out of 2.0 mm thick CRCA sheet for controlgear. Front and back door operating with locking arrangement at front. Panel shall be provided with proper ventilation arrangement from both sides including ventilation fan etc. Protection of enclosure IP 54 with pre-treatment through 7 tank hot chemical process prior to powder coated with minimum 50-70 micron of approved colour. The bottem of outer shell contains a detachable plate having provision for entry of armoured cable of adequate size. Computer cut self adhesive vinyl danger notice plate having conventional symbol of bones and skull to be provided. The panel shall be provided with manufacturer name plate, heavy duty SS cable glands of adequate size for incoming and outgoing cable. EPDM gasket of appropriate shape and size provided at all joints, door and covers including uitable size angle iron/flat iron frame work/support required with four legs 60cm long using angle iron 40x40x6mm duly painted with anti corrosive paint, air passing holes and locking arrangement at front with duplicate keys and making connection of incoming and outgoing cable using proper cable lug,4x legs 40 cm grouted in PCC 1:2:4 and making good disturbed surface complete and comprising of the following :- 35 (A) (i) TPN Aluminium electroytic grade bus bar of capacity 150 Amps for phases & 200 Amps for neutral and auxillary bus bar to support main bus bar duly suported on SMC/DMC, bus bar supports and insulated with colour coded heat shrinkable sleeve (ii) Digital muitifiunction meter (V,A,KW,KWH), 415 AC alongwith C.Ts of suitable ratio (set of three) complete (iii) Indication lamps LED type (RBY)= 01 set of three(iv) Internal wiring with suitable size of FRLS copper conductor cable. (B) Incomer(i) MCCB 100 Amps 4 pole confirming shall confirm to IS : 13947 (Part 3, 1993) and IEC- 60947 (Part-2), 36 KA, thermal magnetic release, adjustable overload release 64-100% of nominal current and adjustable short ckt release 3.5 to 10 in setting complete with phase separetor -01 nos.(C) Outgoing(i) MCCB 75 Amp 4 pole confirming shall conform to IS: 1394/(Part3, 1993) and IEC- 60947 (Part-2), 36 KA, thermal magnetic release, adjustable overload release 64-100% of nominal current and adjustable short ckt release 3.5 to 10 in setting complete with phase separetor -01 nos. (ii) MCB SPN 32 Amp -02 Nos. D)platform for feder pillar/LT Panel shall be of suitble size as directed, 450 mm height above ground level, the foundation shall be usingPCC 1:2:4 type B-1 , 15 cm thick, brick (sub class B) work in CM 1: 6on exposed surfaces and100 mm thick PCC 1:3: 6 type C1using20 mm graded stone aggregate as in padding on top and grouting legs of panel.Note- (i) Contractor shall subit the following Test report i.e. IP Test Report and verification of short circuit withstand test report issued by CPRI in respect of LT Panel (ii) contractor shall submit drawing for approval prior to place order. 36 Supply, installation and erection in true vertical position or to be planted a strut steel tubular swaged welded poles complete with MS base plate of 6mm thick of size 300mmx300mm at bottom duly welded and MS pole cap at top,pole shall made out of ERW MS tubing confirming to IS-1161 Part-II, type 410 SP-31 (9.0 m long) including drilling of holes of required size and nos for fixing of cross arms/clamps, pole shall be painted internally throughout using anto corrosive black bituminous paint conforming to IS: 158-1968 and externally painted with two coat of red oxide primer and two coats of aluminium paint for expose surface and two coats of black biuminous paint for portion embedded in concrete, painting three black/white bands at lower portion of pole each of 300mm height at 300mm spacing, writing pole no. with black paint in yellow paint circle 10cm dia at suitable height complete all as specified and directed by Engr-in-charge. Note : Earthwork, PCC 1:4:8 and PCC 1:2:4 shall be measured and paid seperately. 37 Supply and fixing hot pressed moulded glass reinforced polyester sheet moulding compound (SMC) junction box of dimensions 225mmx295mmx120mm, SMC confirming to IS- 13410:1992 Grade S1,IP 55, thickness of SMC sheet not less than 1.5mm, outdoor type, single door hinged with front side opening, weather proof, suitable locking arrangment at front, arrangement for incoming and outgoing cable entry at the bottom, earthing arrangement using one No. of earthing bolt of MS with 2 nuts and 2 washers provided on RH side of box,Earthing sign ha to be provided near to earthing blt complete all as pecified and comprising of the followings items as under :(a) Single phase and neutral bus bar uly colour coded of capacity 30 amps using aluminium strips of size 15mmx2mm mounted on epoxy resin base insulators, drilled holes for cable connection on bus bar including provision of PVC cable of suitable size and length from bus bar to MCB,nos cable glands. (b) MCB SP 06 Amps - 01 No.(c) Provision of clamp for monting on pole/wall,clamp made from 20mmx1.5mm flat iron of suitable shape and length duly fixed with nuts & bolts on the rear side of box. 38 Supply and fix LED street light fittings 60 watt for operating voltage between 140V to 270V system luminious efficacy not less than 110 lumen/watt, PF -0.95 minimum, IP66 protection, 5700CCT(K),CRI between 80-85 confirming to LM79 and LM 80 standards or as per IS:16104:2012 and IS:16106:2012 for estimated life span of minimum 50000 hrs consisting of high/low voltage cutt off,maintenance free isolated Electronic driver circuits SMPS based constant current supply with phase to phase protection , over voltage protection,surge protection and other safety tests as per IS:15885 Part-2/Sec13, Low THD, PMMA grade high quality transmittance lens, LED street optics LENS for uniform light distribution, weather proof gasket for lamp & driver compartment. Heat resistance toughened UV stabilized glas fitted in pressure die cast aluminium housing with SS screws with IP 65/66 protection, complete all as specified and as directed by Engr-in-Charge 39 SEWAGE DISPOSAL 40 Supply, laying in trenches and jointing of 200 mm dia bore double wall corrugated polyethelene (HDPE) pipe of stiffness class designation SN8 including all necessary jointing material and fittings such as couplers, connectors,bends, elbows ,Tees and end caps etc complete all as specified and as directed. 41 Total amount of Schedule A Part X carried over to General Summary 42 Blank 43 Blank 44 Blank 45 GENERAL SUMMARY 46 Lumpsum price worked out by the contractorfor “BUILDINGS & STRUCTURES” as listed inSchedule ‘A Part I representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part I on Srl Page No. 24 47 Lumpsum price worked out by the contractorfor “EXCAVATION,EARTHWORK & SITE CLEARANCE (FOR SCHEDULES OTHER THAN SCHEDULE A PART-I)” as listed inSchedule ‘A Part II representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part II on Srl Page No. 26 48 Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A Part III representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part III on Srl Page No. 28 49 Lumpsum price worked out by the contractor for “INTERNAL ELECTRIFICATION ” as listed in Schedule ‘A Part IV representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part IV on Srl Page No. 34 50 Lumpsum price worked out by the contractor for “ROAD/ PATH/ CULVERT” as listed in Schedule ‘APart V representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part V on Srl Page No. 35 51 Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A Part VI representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part VI on Srl Page No. 37 52 Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A Part VII above/below the lumpsum price as inserted by MES for Schedule ‘A’ Part VII on Srl Page No. 39 53 Lumpsum price worked out by the contractor for “SEWAGE DISPOSAL ” as listed in Schedule ‘A Part VIII above/below the lumpsum price as inserted by MES for Schedule ‘A’ Part VIII on Srl Page No. 41 54 Lumpsum price worked out by the contractor for “AREA DRAINAGE” as listed in Schedule ‘A Part IX representingabove / below the lumpsum price as inserted by MES for Schedule ‘A’ Part IX on Srl Page No. 43 55 Total amount of SCHEDULE A PART X (MISC ITEMS) (B/R & E/M ITEMS) brought forwarded from Serial Page No. 55

BRR:9691529 Bids Are Invited For Truck Mounted Fog Cannon / Anti Smog Gun / Dust Suppression System Total Quantity : 1

BRR:9691435 Bids Are invited for Asm Cylinder , Cam Shaft Roller Chain , Pickup Oil Pump Wet Sump , Asm Caliper Brake Double Bore Rh , Asm Caliper Brake Double Bore Lh Total Quantity : 6

BRR:9689689 Tender For PROCUREMENT OF CEP ITEMS, (I) Casing(Suct&Disch)Assy-144Rnd 660&800Mw (Ii) Column Pipe Lower Assy-144Rnd (Iii) Column Pipe Upper Assy-144Rnd (Iv) Thrust Bearing Base Pedestal- 144Rnd (V) Thrust Bearing Base Plate- 144Rnd , (I) Outer Casing-144Rnd 660&800Mw (Ii) Sole Plate - 144Rnd 660Mw&800Mw => Limited

BRR:9683011 Bids Are invited for G00580040300220032 - Oil Seal Synthetic Neoprene, Spring Loaded Lip Type, Without Outer Metallic Casing, Shore Hardness 65 Deg. Size- Id 22 X Od 32 X Width 7 Mm , G00580040300320047 - Oil Seal Synthetic Neoprene, Spring Loaded Lip Type, Without Outer Metallic Casing, Shore Hardness 65 Deg. Size- Id 32 X Od 47 X Width 7 Mm , G00580040800750095 - Oil Seal Synthetic Neoprene, Spring Loaded Lip Type, Metallic Casing, Shore Hardness 65 Deg. Size- Id 75 X Od 95 X Width 12 Mm , G00580030901150140 - Oil Seal Synthetic Neoprene, Spring Loaded Lip Type, Without Outer Metallic Casing, Shore Hardness 65 Deg. Size- Id 115 X Od 140 X Width 13 Mm , G00580030400550080 - Oil Seal Synthetic Neoprene, Spring Loaded Lip Type, Without Outer Metallic Casing, Shore Hardness 65 Deg. Size- Id 55 X Od 80 X Width 12 Mm Total Quantity : 70

BRR:9682422 Bids Are Invited For Conveyer Roller Chain , Simplex Half Connecting Link , Simplex Full Connecting Link Total Quantity : 44

BRR:9680830 Bids Are Invited For Handling ,Transport And Other Mining Services - Percentage Quote Based - Dust Suppression Through Mobile Water Tanker Enabled With Pump Based Mechanical Spraying Arrangement From Pwd Road Via Chat Ghat Road Upto Water Filling Point Of Mkd I Ocm Of Um..

BRR:9678995 Bids Are invited for Field Coil , Pull Cable Acc , Combination Switch , Hose Assy Air Brake , Belt Water Pump , Flange Joint Rubber , Clutch Disc , Starter Kit Drive Assy , Cyl Block Assy , Timming Roller Cam Chain , Chain Sprocket Set , Lock Ignition , Cap Fuel Filter , Kick Starting , Plate Rear Drum , Chain Sprocket Set , Sensor , Wheel Cyl Total Quantity : 28

BRR:9706252 Bids Are Invited For Reflector,104949,Carousel Kosncris - Part Name- Reflector Round 83_Part Number-104949_Manufacturer- Kosan Crisplant_Equipment Name-Carousel_Equipment Manufacturer-Kosan Crisplant , Gas Stop Valve Service Kit,961148,Carou - Part Name-Service Kit_ Part Number-961148_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant_ For Gas Stop Valve , Suspension,106294,Carousel Kosncris - Part Name-Suspension_ Part Number-106294_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Part Material-Rubber_ Equipment Manufacturer-Kosan Crisplant , Roller,203800,Carousel Kosncris - Part Name-Roller_ Part Number-203800_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Part Material-Teflon With Bush , Nut & Bolt , Screw,111A352,Carousel Kosncris,M10x40mm - Part Name-Adjustment Screw_ Part Number-111A352_ Manufacturer-Kosan Crisplant_ Part Size-M10 X 40 Mm_ Equipment Name-Carousel , Brg,Ball,Radial,6301-2Z 12Mm,37Mm, Make - Ball Bearing_ Type-Radial Contact_ Series-6300 2Z_ Rows-Single_ Design Spec-Din 625_ Style-Deep Groove With Two Shield_ Material,Cage-Pressed Steel_ Designation (Skf,Rhp Number)-6301 2Z_ Type Of Bore-12 Mm_ Diameter,Od-37 Mm_ Width Height-12 Mm , Brg,Ball,Radial,6304 Skf Zz Round,52Mm, - Ball Bearing_ Type-Radial Deep Groove_ Material,Cage-Steel_ Designation (Skf,Rhp Number)-6304 Skf Zz_ Type Of Bore-Round_ Diameter,Od-52 Mm_ Width Height-15 Mm , Brg,Ball,Radial,6024-2Z 120Mm,180Mm, Mak - Ball Bearing_ Type-Radial Contact_ Series-6000 2Z_ Rows-Single_ Design Spec-Din 625_ Style-Deep Groove With Two Shield_ Material,Cage-Pressed Steel_ Designation (Skf,Rhp Number)-6024 2Z_ Type Of Bore-120 Mm_ Diameter,Od-180 Mm_ Width Height-28 Mm , Brg,Ball,Radial,6016-2Z 80Mm,125Mm, Make - Ball Bearing_ Type-Radial Contact_ Series-6000 2Z_ Rows-Single_ Design Spec-Iso 15_ Style-Deep Groove With Two Shield_ Material,Cage-Pressed Steel_ Designation (Skf,Rhp Number)-6016 2Z_ Type Of Bore-80 Mm_ Diameter,Od-125 Mm_ Width Height-22Mm , Sprocket 8 Teeth - Teeth Sprocket 8 Teeth Fitted With Teflon Bush With Internal Diameter Of 40 Mm, Teeth Hardness 170 To 190 Bhn, Pitch 2.5 Inch , Wear Plate,334B749,Carousel Kosncris,2Mm - Part Name-Wear Plate, Base Plate For Filling Scale_ Part Number-334B749_Manufacturer-Kosan Crisplant_ Part Size-2 Mm_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Wheel,215B931,Carousel Kosncris Gd Pt C - Part Name-Wheel,Tt-Md_ Part Number-215B931_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant_ Tt-Md , Arm Complete Left,256B433.V Kosncris - Part Name-Arm Complete Left_ Part Number-256B433.V_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Arm Complete Right,256B433.H Kosncris - Part Name-Lever Complete_ Part Number-256B433.H_ Manufacturer-Kosan Crisplant_ Equipment Name-Gd Pt Centring Arm_ Equipment Manufacturer-Kosan Crisplant , Chain Conveyor - Part Name-Conveyor Chain_ Part Number-N A_ Manufacturer-Ti Diamond Rolon_ Equipment Name-N A_ Equipment Model-N A_ Type-Riveted_Chain Pitch-63.5 Mm (Approx.)_ Distance Between Chains-112 Mm (Approx.)_ Number Of Chain Links-16 Per Mt (Approx.)_ Working Strength-3000 Kg Strand_ Breaking Strength-6500 Kg Strand_ Factor Of Safety-2 (Min)_ Chain Life-4 Yrs Minimum_ Chain Material-En8_ Hardness-200 To 220 Bhn_ Ultimate Strength-6500Kgs Strand_ Tension Arrangement-Hinged Weight And Counter Weight Balanced_ Chain Height-32 Mm (Approx)_ Chain Length-43 Mm (Approx)_ Pin Length-43 Mm_ (Approx) Leaf Thickness-6 Mm (Approx) Material-Bush, Medium Carbon Steel-En 8_ Leaf-Medium Carbon Steel-En 8_ Pin-High Tensile Ni-Cr-Mo Alloy Steel En-24 , Chain,Duplex,Size-1In Diamond - Chain_ Type-Duplex_ Pitch-1 In_ Size Capacity-25.40 X 17.02 X 15.88 Mm_ Manufacturer-Ti Diamond_ Model Number-D16002 120C-16D-2. 3 Meter Length Each , Cuc Card Cover,Leather Size-250X150mm - Item Description-Cuc Card Cover_ Material-Synthetic Leather_ Manufacturer-N A_ Size Capacity-250 X 150 Mm_ Type- Front Side Transparent , Sealing Unit Gun,Hot Air,Ms Type 1 - Tool Name-Sealing Unit Gun_ Type-Hot Air_ Material-Mild Steel_ Size-As Specified Ny Office-In-Charge_ Length-As Specified Ny Office-In-Charge_ Should Be Suitable For Sealing Pvc Seal On Lpg Cylinders , Sealing Unit Gun,Hot Air,Ms Type 2 - Tool Name-Sealing Unit Gun_ Type-Hot Air_ Material-Mild Steel_ Size-As Specified Ny Office-In-Charge_ Length-As Specified Ny Office-In-Charge_ Should Be Suitable For Sealing Pvc Seal On Lpg Cylinders , Drive Chain Pin - Supply Of Chain Conveyor Pin Riveted Type. En 24 Material. , Lock Pin,Chain Conveyor Duplex Chain - Type-Duplex,Master Lock_ Material-Wear Resistant Steel_ Dimension-1 In_ Application-Duplex Drive Chain_ Make-Ti Diamond Rolon_ Hardness-350 Bhn (Min)_ Pitch-1 Inch_ Working Strength-7500 Kg_ Breaking Strength-15000 Kg_ Factor Of Safety-2_ Each Unit Length-3 Meters , Flex Coupling,138A801,Kosncris Carousel - Part Name-Flex Coupling,Qm 8050 38_ Part Number-138A801_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant_ Equipment Model-N A , Flex Coupling,137A860,Kosncris Carousel - Part Name-Flexible Coupling_ Part Number-137A860_ Manufacturer-Kosan Crisplant_ Part Size-M12 X 1.25 Mm_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Brg Unit,Plumber Block,P212 Size-60Mm - Bearing Unit_ Type-Plumber Block_ Designation-P212_ Brand- Ntn Skf_ Diameter,Shaft-60 Mm_ With Housing_ Drive Unit Bearing , Brg Unit,Pillow Block,P213 Dia-65Mm - Bearing Unit_ Type-Pillow Block_ Designation-P213_ Brand- Ntn Skf_ Diameter,Shaft-65 Mm_ With Housing_ Drive Unit Bearing , Strip,Conveyor Pe,5X50mm For Connveyor - Part Name-Strip_ Part Number-N A_ Manufacturer-N A_ Part Material-Polyethylene Teflon_ Part Size-Thk-5 X Wd-50 Mm_ Equipment Name-Conveyor_ Equipment Model-N A_ Railing, Ultra High Molecular Weight. Polyethylene (Uhmwpe), Length-3 Mt. , Wear Strip,Chain Conveyor Uhmwpe Teflon - Part Name-Wear Strip_ Part Number-N A_ Manufacturer-N A_ Part Material-Uhmwpe Teflon_ Part Size-50 X 6 Mm_ Equipment Name-Chain Conveyor_ Equipment Model-N A_ Additional Information-For Laying_ Colour-Black, Length-3 Mt. , Taper Strip,Conveyor Teflon,1850X32x13 8 - Part Name-Taper Strip_ Part Number-N A_ Manufacturer-N A_ Part Material-Teflon_ Part Size-1850 X 32 X 13 8 Mm_ Part Rating-90 Deg_ Equipment Name-Conveyor_ Equipment Model-N A_ For Bends For Conveyor System. The Material Of Construction Will Be Ultra High Molecular Weight (Uhmw), Length-3 Mt , Rubber Matsz-2X1x0.025Mt - 2 Mx1 Mx0.025 M Isi Marked Rubber Mat Of Approved Manufacturer And As Per Is 15652 _ 2006. , Swivel Arm Set,Conveyor, Left - Part Name-Swivel Arm Set Left_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Conveyor_ Equipment Model-N A_ For Double Stopper Set , Swivel Arm Set,Conveyor, Right - Part Name-Swivel Arm Set Right_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Conveyor_ Equipment Model-N A_ For Double Stopper Set , Lpg Lot 47.5 Kg Filling Gun - Filling Gun For Lot Type 47.5 35 Kg Cylinders , Material- Brass , Lpg Filling Gun 425 Kg - Filling Gun For Lot Type 425 Kg Sumo Cylinders _ Material- Brass , Manual Cvt Cylinder,5 14.2 19Kg - Part Name-Manual Cvt_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Cylinder_ Equipment Model-N A_ Equipment Capacity-5 14.2 19 Kg_ For Filled Cylinder Valve Leak And O-Ring Leak Checking Complete With All Accessories With Pneumatic On Off Switch, Testing And Commissioning , Manual Cvt Cylinder For Lot Valves - Part Name-Manual Cvt_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Cylinder_ Equipment Model-N A_ Equipment Capacity-47.5 35 Lot Type Cylinders Kg_ For Filled Cylinder Valve Leak And O-Ring Leak Checking Complete With All Accessories With Pneumatic On Off Switch, Testing And Commissioning , Manual Cvt Cylinder For 425 Kg Sumo Cyli - Part Name-Manual Cvt_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Cylinder_ Equipment Model-N A_ Equipment Capacity-425 Kg Sumo Cylinders_ For Filled Cylinder Valve Leak And O-Ring Leak Checking Complete With All Accessories With Pneumatic On Off Switch, Testing And Commissioning , Stopper Set Cylinder W - Part Name-Stopper Set_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Cylinder_ Equipment Model-N A_ Stoppers Shall Be Rigid Enough To Contain The Load Of The Cylinders In That Particular Section Where It Is Installed. Both The Arms Shall Be Operated By Independent Pneumatic Cylinders Mounted On Each Arm. The Unit Shall Include Air Service Units And Necessary Pneumatic Depending On The Operational Requirements. 3.1. 10Wear Plates The Wear Plates Shall Be Made Of Ultra High Molecular Weight-Poly Ethylene Uhmw-Pe Of Thickness 10 Mm And 6 Mm As Per The Requirement. The Tenderer Shall Furnish Necessary Catalogues For The Wear Plate. The Tenderer Shall Also Furnish Details Like Manufacturers Name, Previous Locations Where It Has Been Installed In Chain Conveyors Attaching Copies Of Letters Confirming Satisfactory Running Of The System In Those Location , Diverter,Chain Conveyor Ms,800X90x40mm - Part Name-Diverter_ Part Number-N A_ Manufacturer-N A_ Part Material-Mild Steel_ Part Size-800 X 90 X 40 Mm With Hollow Tubes 450Mm C C For Hinging_ Equipment Name-Chain Conveyor_ Equipment Model-N A , Lifting Disc,230B890,Carousel Kosncris - Part Name-Lifting Disc_ Part Number-230B890_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Wheel,714903,Kosncris Carousel - Part Name-Wheel,Travelling_ Part Number-714903_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant_ Equipment Model-N A , Spray,Wd-40 - Oil And Lubricant_ Item Name-Spray_ Brand Name-Wd-40_ Viscosity Grade-N A_ Form Of Supply-400 Ml Bottle , Crc Spray - Oil And Lubricant_ Item Name-Crc Spray_ Brand Name-N A_ Viscosity Grade-N A_ Form Of Supply-200 Ml , Mounting Plate,Kosan Ms,Filling Gun - Part Name-Mounting Plate_ Part Number-N A_ Manufacturer-Kosan_ Part Material-Mild Steel_ Part Size-150 X 150 X 6 Mm_ Equipment Name-Filling Gun_ Equipment Manufacturer-Kosan_ Equipment Model-N A , Stabilizer,Kosan Rbr,Filling Gun - Part Name-Stabilizer_ Part Number-N A_ Manufacturer-Kosan_ Part Material-Rubber_ Equipment Name-Filling Gun_ Equipment Manufacturer-Kosan_ Equipment Model-N A , Guide,105248300,Carousel Kosncris - Part Name-Guide_ Part Number-105248300_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Oil Seal, Gear Box - Supply Of Helical And Worm Gear Box Oil Seal, From 4 Inch To 7 Inch As Per Requirement, Suitable For Crompton, Premier, Etc. , Hand Gloves - Part Name- Safety Hand Gloves_ Part Number- Na_ Manufacturer- Na _ Equipment Name- Na_ Specification- Polyster, Latex Coated Industrial Glove , Oring Remover - Part Name- Oring Remover_ Part Number- Na_ Manufacturer- Na _ Equipment Name- Na_ Specification- Oring Remover Tool For Lpg Self Closing Valve. , Purging Adaptor - Part Name- Oring Remover_ Part Number- Na_ Manufacturer- Na _ Equipment Name- Purging Adater_ Specification- Purging Adapter Compatible With Lpg Sc Valve. , Evacuation Adaptor - Part Name- Oring Remover_ Part Number- Na_ Manufacturer- Na _ Equipment Name- Evacuation Adater_ Specification- Evacuation Adapter Compatible With Lpg Sc Valve. , Dead Man Switch - Part Name- Dead Man Switch_ Part Number- Na_ Manufacturer- Janatics _ Equipment Name- Dead Man Switch_ Specification- Dead Man Switch For Telescopic Conveyor Boom , Cvt Verifier - Part Name- Cvt Verifier_ Part Number- Na_ Equipment Name- Cvt Verifier_ Specification- Can Verifiy Lpg Dom Vot Sc Valve, Lot Valve, Sumo Valve. , Ejection Arm - Part Name-Ejection Arm _ Part Number-327B114_ Manufacturer-Kosan Crisplant_ Equipment Name- Carousel Ejection Arm , Double Stopper Straight Type , Double Stopper Spindle Type - Part Name-Swivel Arm Set Right_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Conveyor_ Equipment Model-N A_ For Double Stopper Set , Push Button - Part Name- Pneumatic Push Button_ Part Number-Na_ Manufacturer-Kosan Crisplant_ Equipment Name- Push Button_ Equipment Manufacturer- Janatics , Brass Block - Part Name- Brass Block_ Part Number-230B938_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Needle Valve - Part Name- Brass Block_ Part Number-136A408_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Lifter Cylinder Pad - Kosan Part Number- 230B890_ Name- Lifting Plate For Rotary Unit , Lifting Unit - Kosan Part Number- 237B990copy_ Name- Lifting Unit_ Included Parts- 139A381 Cyl Compact Double Rod Dia 63-40 Ex, 141A415 Screw Din912 M8x90-8.8 Elz, 138A073 Straight Coupl 1 4Mp-Dia 8 Elz, 139A173 Throttle Valve, 9 237B991 Base For Lifting Unit, , Toggle Joint - Part Name- Toggle Joint_ Part Number-159A459_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , U Plate Yoke - Part Name- U Yoke Plate_ Part Number-230B956_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Cuc Card Keypad Mk4 , Back Mounting - Part Name- Back Mounting (Part Number 4 In The Picture) _ Part Number-140A074_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , L Mounting , S.S Wheels For Telescopic Boom - Traction Wheel,Conveyor Ss, Part Name-Traction Wheel_ Part Material-Stainless Steel Mild Steel_ Equipment Name-Telescopic Conveyor_ Dimension- Provided By Location. , Cable Drag Chain - Part Name-Drag Chain_ Part Number-N A_ Manufacturer-N A_ Equipment Name-Telescopic Conveyor_ Equipment Model-N A_ Job Includes Supply Of Drag Chain For Installing Pneumatic Hoses , Kosan Filling Gun Assembling Tool Kit - Part Name- Kosan 24H Carousel Filling Gun Assembly Tool Kit_ Part Number-960423_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Ucp Bearing P216 Dia-65Mm , Kosan Eld Block - Part Name- Eld Ms Block_ Part Number-230B955_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Bearing,262B350 - Part Name- Check Scale Toggle Joint Bearing_ Part Number-262B350_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Kosan Swivel Joint,262B358 - Part Name- Check Scale Toggle Joint Bearing_ Part Number-262B538_ Manufacturer-Kosan Crisplant_ Equipment Name-Carousel_ Equipment Manufacturer-Kosan Crisplant , Vision Unit Tubelight Philips Master Tl- , Countersunk Allen Screws, M10x25mm, Mak - Countersunk Allen Screws, M10x25mm, Make- Unbrako Or Equivalent , Hex Nut Bolt With Double Washer M6 To M - Hex Nut Bolt With Double Washer M6 To M16, Length- 20Mm To 100Mm In Kgs , M10 X 30Mm Hex Bolt And Nut, Hot Dip Gi - M10 X 30Mm Hex Bolt & Nut, Hot Dip Gi , M10 X 25Mm Hex Nut Bolt, Hot Dip Gi , M10 X 40Mm Hex Nut Bolt, Hot Dip Gi , M3 X 60Mm Allen Screws With Nut, Make- - M3 X 60Mm Allen Screws With Nut, Make- Unbrako Or Equivalent , Nylon Inserted Lock Nut, M10, Make- Unb - Nylon Inserted Lock Nut, M10, Make- Unbrako Or Equivalent , Nylon Inserted Lock Nut, M12, Make- Unb - Nylon Inserted Lock Nut, M12, Make- Unbrako Or Equivalent , Nylon Inserted Lock Nut, M8, Make- Unbr - Nylon Inserted Lock Nut, M8, Make- Unbrako Or Equivalent , Sealing Unit Hose, 0.5 Inchx1000mm, Fiber - Type-Hose_ Material-Teflon_ Length-1 Mt_ Pressure Designation-N A_ Dimension-N A_ Additional Information-Sealing Unit_ Fiber Wrapped Hose , Sealing Unit Hose, 0.5 Inch X600mm, Fiber W - Type-Hose_ Material-Teflon_ Length-600 Mm_ Pressure Designation-N A_ Dimension-N A_ Additional Information-Sealing Unit_ Fiber Wrapped Hose , L Bend And Z Bend - Part Number- 359B577 Or 100264 As Demanded By The Po Placement Body. , M.S E Plate 8 Mm Thickness , Teflon E Plate 8 Mm Thickness , Portable Hand Sealing Gun , Telescopic Boom Detachable Chain Pin Total Quantity : 11662

BRR:9706232 Bids Are invited for Ci D Joint 110 Mm Long Collar , Ci D Joint 140 Mm Long Collar , Ci D Joint 160 Mm Long Collar , Ci D Joint 200 Mm Long Collar , Ci D Joint 225 Mm Long Collar , Ci D Joint 250 Mm Long Collar , Ci D Joint 315 Mm Long Collar , Ci D Joint 355 Mm Long Collar , Hand Pump Pedestal , Hand Pump Water Chamber , Hand Pump Conversion Set , Hand Pump Link Rod 12 Mm Total Quantity : 660

BRR:9705060 Bids Are Invited For Repair Of Oil Chamber And Water Pump Of Bofors Gun 155Mm Total Quantity : 1

BRR:9690176 Tender for Construction Of Double Soling Bp Road From The House Of Mrityunjay Maity Towards The Sluice Gate River Embankment At Gobindapur Abad

BRR:9690168 Tender for Construction Of Pucca Drain From Baro Culvert Towards Sluice Gate At Gobindapur Abad

BRR:9688801 Tender for Ttps - Operation Circle - Cad- Unit-Ii Cw Pump 6.6Kv, 500 Kw Jyothi Make Cw Pump Motor Top Bearing Oil & Water Chamber And Side Air Cooler Pipes Cleaning, And Complete Cleaning Of Converging And Diverging Type Fan And Fan Cover By Using Soap Oil And Painting Works At Cwph-I

BRR:9678976 Bids Are invited for Pipe Flexible , Fuel Pipe , Belt , Bolt , Element Micro Filter , Filter , Pipe Tail , Fuse Box , Ball Bearing , Solenoid Switch , Armature , Starter , Rubber Hose , Hinge Total Quantity : 54

BRR:9706181 Bids Are Invited For Auxiliary Terminal Box (For Rtd/Btd) To Drg. No. 14022340001, Var. 14, Rev. 07 Total Quantity : 1600

BRR:9697694 Supply Of Terminal Box Complete With Cover As Per Drg.No. Sr.Dee/Rs/Gzb/291/3Phase/2013Terminal Box Complete With Cover As Per Drg.No. Sr.Dee/Rs/Gzb/291/3Phase/2013,Terminal Box Complete With Cover As Per Drg.No. Sr.Dee/Rs/Gzb/291/3Phase/2013 [ Warran Ty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:9690099 Tender For Replacement Of Electrical Cables, Terminal Boxes And All Fuse Career Units At Cift Residential Complex, Thevara

BRR:9682831 Bids Are Invited For Main Terminal Box Assy. To Drg. No 14032140023, Var. 00, Rev. 02. Total Quantity : 100

BRR:9707097 Bids Are invited for Hammer Bar , Hammer Bar Bolt With Double Nut And Washer , Side Liner Plate Bolts , Breaker Liner Bolts With Double Nut , Spring , Machine Pulley , End Lock Washer , Spacer Pulley Inside , Hinge Pin With Lock Plate , Slide , Rubber Seal , Screw , Coller , Eyelet , Pin , Washer , Spring Guide Rod , Bracket , Rubber Cover , Rubber Cover Washer , Sphere Guide Convex , Sphere Guide Concave , Hex Tr. 75 X 4 , Lock Nut , Bearing Housing , Inner Bearing Cover , Outer Bearing Cover , Inner Labyrinth , Outer Bearing Labyrinth Total Quantity : 430

BRR:9706727 Bids Are Invited For Blower 4000 Cfm Capacity To Drg No 17188801011. Greese Nipples To Be Fitted On Bearing Housing Total Quantity : 2

BRR:9706406 Bids Are Invited For E5153273 - Fan As Per Drg. No. 34464099044 (Nabl) V00 Rev. 02. , E5153273 - Commutator Cover With Bearing Housing As Per Drg. No. 34461799010 (Nabl) V00 Rev. 03 Total Quantity : 20

BRR:9706116 Bids Are invited for Cooling Fan , Wheel Bearing , Housing , Driving Flang , Self Housing Kit , Gear Lever Kit , Rear Hub Bearing Inner , Air Cleaner Hose , Gear Lever End , Pressure Plate , Air Dryer With Unloader Valve Total Quantity : 20

BRR:9701295 Bids Are Invited For Deflector Link Lever Var-03 As Per Drg. 36139600305/04 With Matl. As Per Sepcn. Aa10119/15 , Bearing Housing (Hy-307.01) Fully M/Cd Item As Per Drg. 36139600302/01 With Matl As Per Specn. Aa102 , Stud-Bowl Hub To Gear Box (Hy-375.40) As Per Drg. 36110002922/01 With Matl. As Per Specn. Hy10664/06 Total Quantity : 10

BRR:9688895 Procurement Of Centrifugal End Suction Pump With Motor - 1 No , Centrifugal End Suction Pump With Motor, Make : Kirloskar Brothers, Pump Model:Shm 200/32 N, Capacity:600 M3/H, Total Head:16.00 M, Motor Kw:45, Rpm : 1445, Material Test Certificate & Pump, Performance Test Report To Be Furnished, At The Time Of Delivery. Pump Serial Number;1460895002,Motor;45Kw,3Phase Induction Ie2 Motor,Pump Suction/Discharge;200/200Mm,Pump Moc,Castiron;Casing,Gland,Impeller,Bearing Housing,End Covers,Back Plate,Shaft;Carbon Steel,Sleeve;Aisi 410(H),Lubrication;Oil Or Grease,Impeller;Two Vane Enclosed, Gland Packing;Inmarco Style 102,Coupling;Tyre F90 For Pump/Motor. Note;Pump With Motor Fixed,Aligned,Coupled Condition On Base Frame(Ms)Assembled With Grouting Bolts,Coupling Gaurd. Along With Quote;Gad,Csd With Moc,Performance Curve. Along With Supply;Mfrs Tc,Mtc,Guarantee,Manual. Pump Make;Kirloskar Brothers Ltd,Wilo,Spx Flow Technology,Goulds,Grundfos,Crompton,Ksb. Motor Make;Kirloskar,Crompton Greaves,Siemens,Havells,Bhel.Above Horizontal,Solid Handling (Non Clog) Sewage Pump,Single Stage,Single Suction With Back Pull Out Type Design Class 150#Urgently Required For Kstp Plant

BRR:9691346 Bids Are Invited For Hp Pump Oil , Cartridge Filter Element 20 Inch Long , Fuel Filter Element , Lube Oil Filter , Turbidity Meter , Module Bypass Nozzle 316 , Blank Plug , Charging Device With 3 By 4 Inch Bsp F Third Make Epf , Valve Kit , Seal Kit , Anode Plug , O Ring Bearing Cover 70D , O Ring Drain Plug , O Ring Bearing Oil Filter Cap 70D , Adopter Male , Adopter Female , Ball Bearing 6305 22 04 Syn , Ball Bearing , Seal Ring Stationery Carbon , Neck Ring , Sleeve , Spacing Pipe , Bag Filter Strainer , Cartridge Filter Housing , O Ring Connector , Hp Connector Feed Oblice Brain , Membrane Cushion , Hydraulic Disk , Hp Hose 3 By 8 Inch Id 580 , Grove Ring Gasket , O Ring Hydraulic Disc , Transparent Pipe Pu4 , Transparent Pipe Pu3 , Pressure Transmitter , 3 Way Ball Valve , Pressure Switch , Level Switch Size 318 Bsp M , Flow Switch Gk Ii , Circuit Breaker 20 Point 25 Amp , Cartridge Filter Housing , 3 Phase Induction Motor 415 V 50 Hz Total Quantity : 408

BRR:9679809 Bids Are Invited For Bag Filter (Q3) Total Quantity : 1600

BRR:9703893 Bids Are Invited For Repair And Overhauling Service - Reconditioning Of Coal Nozzle Compartments; 500 Mw Thermal Power Plant; Yes; Buyer Premises

BRR:9695757 Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Thermal Power Plant; Loudo Phone System Repairing & Maintenance; Service Provider repairing and maintenance of complete loudo-phone system at GTPS Total Quantity :

BRR:9695073 Bids Are Invited For Spare Coal Flow Jam Switches , Toggle Switches Spares For Coal Mills Of Thermal Power Stations Total Quantity : 18

BRR:9694058 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Non Comprehensive Bmc For Servicing Of Dry Ash System Air Compressors For The Year 2025 To 27 In Tps Ii; Thermal Power Plant; Annual Maintenance Contract (Amc); As Per Scope; Yes

BRR:9693530 Bids Are Invited For Pourable Insulation For Coal Fired Thermal Power Plant Mel Mahan Total Quantity : 75000

BRR:9692860 Bids Are Invited For Repair And Overhauling Service - Bmc Works On Renewal Of Beater Wheels And Connected Works In Mill System And Pf Duct Maintenance Works In Boilers Of Stage I Units Of Tps Ii For The Year 2026 To28; Thermal Power Plant; No; Buyer Premises

BRR:9692172 Bids Are Invited For Portable High Power Thermal Delivery System Total Quantity : 1

BRR:9688471 Protective Coating On Boiler Tubes Metal Spray Work For 300 Mw Thermal Power Plant Of Unit7

BRR:9707682 Supply Of Sprocket For Simplex Chain Simplexsprocket For Simplex Chain Simplex,Sprocket For Simplex Chain Simplex Part No:-C100000113.040.06.02 B, Make:-Simplex [ Warranty Period: 9 Months After The Date Of Delivery ] ]

BRR:9706182 Bids Are Invited For Custom Bid For Services - Service For Completed Manufacturingshearing Including Press Work, Welding And Assembly Of Bracket Side Box C51a As Per Drg No Ofbc1363

BRR:9705498 Bids Are Invited For Cover Kick Start Shaft , Oil Filter Cartridge , Axle Oil Seal , Tensioner Pull , Hose Assy Air Filter Outlet , Bearing Assembly Front , Mounting Pin (Lower Wishbone Rear) , Assy Link Front Rh , Assy Kit Lined Shoe (Rear) , Lined Shoe Assy (Trailing) Lh , Obj Assy , Bulb 12H7 55W (Head Lamp) , Brake Shoe Front Side , Wiper Blade , Solenoid , Spark Plug (Champion Rc 8 Yc) , Centre Bolt M12x200 Is9484 , Bearing Input Shaft , Cable Assy Acceleration , Oil Filter Assy , Cover Assy Clutch , Disc Clutch , Cable Assy Clutch , Parts Kit Universal Joint , Speedometer Cable , Brake Shoe Front , Brake Shoe Rear , Halde Door , Cable Assemble Speedometer , Breather Pipe , Air Filter Element , Filter Element Intake Air Cleaner , Cable Hood Latch , Cable Parking Brake No 1 , Ball Bearing 6001 , Bearing Clutch Release (2326570 Coo) , Chain And Sprocket Kit , Mounting Engine Front , Element Oil Filter , Assembly Oil Filter , Front & Rear Door Beading Set , Switch Assembly , Hose , Hooter Assembly , Suspension Bush , Fuel Filter , Air Filter , Oil Filter , Release Bearing Butee Dm 86P , Regulator Assembly Rh , Regulator Assembly Lh Total Quantity : 84

BRR:9705481 Bids Are invited for Hose - Spares For Size Ii Dozer Bd 80 , Hose - Spares For Size Ii Dozer Bd 80 , Clutch Seal Oil - Spares For Size Ii Dozer Bd 80 , Booster Gasket - Spares For Size Ii Dozer Bd 80 , Main Soft Seal - Spares For Size Ii Dozer Bd 80 , O Ring Sprocket - Spares For Size Ii Dozer Bd 80 , Seal Ring Assembly - Spares For Size Ii Dozer Bd 80 , Gasket Sprocket - Spares For Size Ii Dozer Bd 80 , Steering O Ring - Spares For Size Ii Dozer Bd 80 , Seal Oil Steering Pump - Spares For Size Ii Dozer Bd 80 , Seal Recoil Spring - Spares For Size Ii Dozer Bd 80 , Air Cleaner Filter - Spares For Size Ii Dozer Bd 80 , Engine Oil Filter - Spares For Size Ii Dozer Bd 80 , Fuel Filter - Spares For Size Ii Dozer Bd 80 , Hybrid Oil Filter - Spares For Size Ii Dozer Bd 80 , Dipstick For Clutch Oil Level - Spares For Size Ii Dozer Bd 80 , Cylinder Head Gasket - Spares For Size Ii Dozer Bd 80 Total Quantity : 78

BRR:9704977 Bids Are invited for Speedometer Head - Tatra , Becon Orange - Tatra , Brake Cylinder - Tatar , Gasket Set Full - Hh , Disk Clutch Vehicular - Als , Brearing Roller Cylinder - Als , Sealing Compound Anabond - Als , Horn Signal Air Horn - Als , Chain And Sprocket Kit - Re , Pneumatic 6 Mm Tube - Tata Bus , High Pressure Hose - Tatra Total Quantity : 20

BRR:9704961 Bids Are invited for Chain Sprocket , Rr Unit , Clutch Plate , Reservior , Timing Belt Tensioner , Handle Brake Cable , Rear Door Shocker , Gear Shifting Arm , Breake Hose Front Side Total Quantity : 9

BRR:9704641 Bids Are invited for Assy Rubber Bush Lower , Rubber For Vacuum Pump , Assy Pipe Coolant , Steering Pump To Gear , Door Beading , Speedometer Cable , Hose Assy , Engine Speed Sensor , Hose , Parts Kit Power Steering , Engagement Clutch , Pinion Drive Self Starter , Hyd Pipe , Chain Sprocket Set , Carburetor Bs 29 , Fuel Motor , Cover Timing Belt Outside , Speedo Drive Complete Plastic Total Quantity : 26

BRR:9704622 Bids Are invited for Gasket - Mg , Valve Plate Compressor - Als , Chain Sprocket Kit - Hh , Pressure Hose Pipe - Tatra , Hose Engine To Radiator - Tata Bus , Gasket Push Rod Cover - Tata , Dust Boot Cover - Tatra , Hose - Tatra Total Quantity : 11

BRR:9702669 Bids Are Invited For Conveyor Deck Assy 67 Tg 1600Mm R-2 Part No.Tb0555 , Conveyor Roller Group Part No.Ta6785 , Conveyor Return Roller Grp With Bracket Part No.Ta3627 , Sprocket Part No.Ta7684 , Conveyor Counter Shaft Assy Part No.Tb0551 , Take Up Housing Assy Part No.Tb0034 , Take Up Housing Assy Part No.Tb0035 , Conveyor Tail Wheel Assy Part No.Tb0554 , Bolt Sprocket Part No.Ta1587 Total Quantity : 131

BRR:9702573 Bids Are Invited For Spring For Self Centering - Mechanical Spares 1 , Hot Air Sealing Gun - Mechanical Spares 2 , Plumber Block W Brg,213 65Mm,Conveyor - Mechanical Spares 3 , Plumber Block W Brg,212 60Mm,Conveyor - Mechanical Spares 4 , Ucp 213 Bearing - Mechanical Spares 5 , Ucp 212 Bearing - Mechanical Spares 6 , Bearing 6204 - Mechanical Spares 7 , Bearing 6305 - Mechanical Spares 8 , Bearing7216 - Mechanical Spares 9 , Bearing 6313 - Mechanical Spares 10 , Bearing 32213 - Mechanical Spares 11 , Bearing 32016 - Mechanical Spares 12 , Bearing 31309 - Mechanical Spares 13 , Bearing 32212 - Mechanical Spares 14 , Bearing 30311 - Mechanical Spares 15 , Bearing 32017 - Mechanical Spares 16 , Uhmw Strip 40Mmx10mmx3000mm - Mechanical Spares 17 , Uhm Taper 13By 8X32x1550mm - Mechanical Spares 18 , Uhm Taper 13By 8X32x1850mm - Mechanical Spares 19 , Cvt Heads - Mechanical Spares 20 , Teflon Roller For Twin Arm Angle Stopper - Mechanical Spares 21 , Pressur Gauge 0-16 Kg 6 Inch - Mechanical Spares 22 , Pressur Gauge 0-10 Kg 6 Inch - Mechanical Spares 23 , Pressure Gauge 0-28Kg, Dial 6 Inch - Mechanical Spares 24 , Pressure Gauge 0-70Kg, Dial 4 Inch - Mechanical Spares 25 , Pressure Gauge 0-16 Kg, Dial 4 Inch - Mechanical Spares 26 , Conveyor Chain Detachable Chain - Mechanical Spares 27 , Pin,Chain,En-24,Conveyor - Mechanical Spares 28 , Ms 60 Mm Bore 32 Teeth Duplex Gear - Mechanical Spares 29 , Ms 60 Mm Bore 38 Teeth Duplex Gear - Mechanical Spares 30 , Sprocket 8 Teeth With Self Lub. Bush Bore 40Mm - Mechanical Spares 31 , 14 Teeth Conveyor Chain Sprocket Hole Dia 65Mm Cast Steel , Grade 1030 As Per Iocl Sample - Mechanical Spares 32 , Duplex Sprocket 65Mm X 32 Teeth - Mechanical Spares 33 , Duplex Sprocket 65Mm X 34 Teeth - Mechanical Spares 34 , Duplex Sprocket 65Mm X 36 Teeth - Mechanical Spares 35 , Duplex Sprocket 65Mm X 30 Teeth - Mechanical Spares 36 , Duplex Sprocket 58 Mm X 18 Teeth - Mechanical Spares 37 , Duplex Sprocket 58Mmx 20 Teeth - Mechanical Spares 38 , Duplex Sprocket 58 Mm X 24 Teeth - Mechanical Spares 39 , Introduction Assembly With Roller - Mechanical Spares 40 , Hex Nipple 0.5 X 0.5 Inch - Mechanical Spares 41 , Ci Coupling 110 No - Mechanical Spares 42 , Ci Coupling 150 No - Mechanical Spares 43 , 1 Inch Pitch Duplex Chain-1 Set Of 10 Ft Length - Mechanical Spares 44 , Triplex Chain 1 Inch - Mechanical Spares 45 , Chain Lock Duplex - Mechanical Spares 46 , Ms 2.5 Mtr C Channel For Conveyor - Mechanical Spares 47 , M.S Iron Sheet 8Inch By 4 Inch - Mechanical Spares 48 , Ms Angle For Conveyor 40Mm X 40Mm X 6Mm Of 6 Mtr Each - Mechanical Spares 49 , Ms Angle For Conveyor 50Mm X 50Mm X 6Mm - Mechanical Spares 50 , Lock Nut M16x40mm With Washer - Mechanical Spares 51 , Csk Bolt 8X1.5 Inch With Nut Washer - Mechanical Spares 52 , Csk Bolt 10X1.5Inch With Nut Washer - Mechanical Spares 53 , O Ring Inserter Tool - Mechanical Spares 54 , 40 Mm Bore Shaft Of 420 Mm Length - Mechanical Spares 55 , 40 Mm Bore Shaft Of 400 Mm Length - Mechanical Spares 56 , 40 Mm Bore Shaft Of 380 Mm Length - Mechanical Spares 57 , 40 Mm Bore Shaft Of 480 Mm Length - Mechanical Spares 58 , 40 Mm Bore Shaft Of 350 Mm Length - Mechanical Spares 59 , 40 Mm Bore Shaft Of 460 Mm Length - Mechanical Spares 60 , Shaft For Helical Gear 60 Mm Bore Length 840Mm Key Slot As Per Requirement Material Grade En 8 By 9 - Mechanical Spares 61 , Conveyor Shaft With Key -65 Mm Dia Length 810Mm By 850Mm With Step Down At One End As Per Iocl Requirement Key Solt As Per Iocl Requirement Material Grade En 8 By 9 - Mechanical Spares 62 , Alen Bolt M6x 25 - Mechanical Spares 63 , Alen Bolt M6x 40 - Mechanical Spares 64 , Alen Bolt M8 X 25 - Mechanical Spares 65 , Alen Bolt M8 X 40 - Mechanical Spares 66 , Supply Of Crc - Mechanical Spares 67 , Supply Of Antenna Valve Rod - Mechanical Spares 68 , 0.75 Inch Inch Ball Valve Class 300 - Mechanical Spares 69 , 0.5 Inch Inch Ball Valve Heavy Duty Class 800 Threaded - Mechanical Spares 70 , 1Inch Inch Ball Valve Heavy Duty Class 800 Threaded - Mechanical Spares 71 , 0.5 Inch Spiral Wound Matellic Gasket Class 300 - Mechanical Spares 72 , 0.75 Inch Matellic Gasket Class 300 - Mechanical Spares 73 , 1Inch Matellic Gasketclass 300 - Mechanical Spares 74 , 2Inch Matellic Gasketclass 300 - Mechanical Spares 75 , 2.5 Matellic Gasket Class 300 - Mechanical Spares 76 , 3 Inch Matellic Gasket Class 300 - Mechanical Spares 77 , 4Inch Matellic Gasket Class 300 - Mechanical Spares 78 , 6Inch Matellic Gasket Class 300 - Mechanical Spares 79 , 8Inch Matellic Gasket Class 300 - Mechanical Spares 80 , Seal Kit Gear Box 78-100-10 - Mechanical Spares 81 , Seal Kit Gear Box 75-55-09 - Mechanical Spares 82 , Seal Kit Gear Box 55-42-8 - Mechanical Spares 83 , Seal Kit Gear Box 78-100-13 - Mechanical Spares 84 , Seal Kit Gear Box 45-65-10 - Mechanical Spares 85 , Seal Kit Gear Box 80-100-10 - Mechanical Spares 86 , Seal Kit Gear Box 60-75-8 - Mechanical Spares 87 , Seal Kit Gear Box 90-110-12 - Mechanical Spares 88 , Seal Kit Gear Box 58-72-8 - Mechanical Spares 89 , Seal Kit Gear Box 90-70-10 - Mechanical Spares 90 , Star 95 Mm - Mechanical Spares 91 , Star 100 Mm - Mechanical Spares 92 , Star 110 Mm - Mechanical Spares 93 , Star 150 Mm - Mechanical Spares 94 , Fastner 12Mm X 125Mm - Mechanical Spares 95 , Fastner 16Mm X 150Mm - Mechanical Spares 96 , 6Mm Nut Bolt Taper Head - Mechanical Spares 97 , 10 Mm X 32Mm Nut Bolt Taper Head - Mechanical Spares 98 , 12 Mm X 40 Mm Nutwith Double Washer Bolt Taper Head - Mechanical Spares 99 , Boom Tyre 3.50.8 - Mechanical Spares 100 , Tube For Boom Tyre 3.50.8 - Mechanical Spares 101 , Earthing Brush For Kosan Carousel - Mechanical Spares 102 , Sealing Machine Gun - Mechanical Spares 103 , Manual Hot Air Sealing Gun With Pneumatic Control - Mechanical Spares 104 , Rexroth Bearing Linear For Ejection Kosan - Mechanical Spares 105 , Gas Stop Valve Seal Kit - Mechanical Spares 106 , Gas Stop Valve - Mechanical Spares 107 , Hex Nipple 1By 2 X 3By 8 Inch - Mechanical Spares 108 , Bushing 1By 2 X 3By 8 Inch - Mechanical Spares 109 , Bushing 1By 4 X 1By 2 Inch - Mechanical Spares 110 , Welding Rod Bundle Of 5 Packets Of Grade E6013 8Mm - Mechanical Spares 111 , Cutting Wheel 5 Inch - Mechanical Spares 112 , Cutting Wheel 4 Inch - Mechanical Spares 113 , Cutting Wheel 14 Inch - Mechanical Spares 114 , Grinding Wheel 4 Inch - Mechanical Spares 115 , Conveyor Section Standard 2.5M Long - Mechanical Spares 116 , Centrally Located Drive Section - Mechanical Spares 117 , Y-Section,Conveyor,Pam - Mechanical Spares 118 , Hydraulic Motor For Valve Screw Machine - Mechanical Spares 119 , Freight - Mechanical Spares 120 Total Quantity : 13918

BRR:9701772 Bids Are invited for Clutch M Cyl Assy , Door Lock Assy Rh , Glass Assy Windscreen , Clutch Release Brg With Sleeve , Head Fuel Filter , Plate Locking Plate , Solenoid Switch 24V , Reverse Light Switch , Door Regulator Lh , Drive Shaft , Selector Shaft Brg , Bearing Sre , Bearing De , Winch Gear Selector Plate 3Rd , Side Cover Seal Kit , Disc Pad , Oil Seal Gear Box , Chain Sprocket , Front Hub Lock , Selector Shaft Brg , Fuel Cock Assy , Oil Seal Total Quantity : 23

BRR:9701634 Bids Are invited for Nk-3786 - Spark Plug , Nk - Rear Wheel Brg , Nk - Chain Sprocket Brg , Nk000766 - Cdi Unit , Nk000845 - Acc Cable , Nk-1012 - Ignition Key , 0603Bab02941na - Brake Pad , X-7423500 - Fuel Filter , 3923600 , 2651-6210-2306 - Wind Shield Glass Total Quantity : 12

BRR:9701564 Bids Are invited for Pump Assy Fuel Part No 15100M830a1 - Maruti , Mounting Engine Front Part No 5340-135143 - Maruti , Proxmity Sensor Part No Ff403300 - Stln , Chain Sprocket Lit Part No 20-K-110 - Hh , Cam Chain Kit Part No 22-K-130 - Hh , Battery Cotoff Switch Part No 2573-5450-9931 - Tmb , Isolator Switch Part No 2920-72-0000349 - Stln Vf , Arm Assy Comp Kick Starter Part No 29620-72-0000349 - Hh , Lens Tail Lamp Part No 6220-004467 - Re , V Belt 12-5X900 Part No 008618 - Mpvc , Drive End Flange Assy Part No P-9900600 - Stln Vf , Clutch Drive Part No P-1324239 - Stln Vf Total Quantity : 17

BRR:9701280 Bids Are invited for Fuel Lift Pump Mico , Gear Shifter Shaft , Chain And Sprocket Kit , Shift Cyl Body , Pressure Control Valve Total Quantity : 6

BRR:9701064 Bids Are invited for Wheel Brg Outer , Double Lever Combination Switch , Starter Push Button Switch , Steering Coloum Bush , Front Hub Oul Seal , Ignition Coil Mpfi , Chain Sprocket , Assy Clutch Booster , Temp Sensor Unit , Oil Seal Self Starter Total Quantity : 17

BRR:9697615 Supply Of Specification Of Computer Paper 15 Inch X 12 Inch , 2 Part. 1. Description: Computer Paper Size: 15 Inch X 12 Inch , 2 Part. 38.1 X 30.5 Cms., 70 Gsm, Is No:12766/97. 2. Carbon Paper Quality: Base Paper Shall Be Type - A To Is 9055/79 With Amendment. The Base Paper Shall Be Coated On One Side With Suitable Carbon Ink Necessary To Give The Required Manifolding Characteristics. 3. Perforation: Sprocket/Round Holes On Both Sides And Free From Chips.4. Monogram: Ir Logo With Diameter -2.5 Cm. 5. Colour Scheme:The Monogram Of Indian Railway Should Be Printed At The Top Left Hand Corner Keeping 2.5Cm Space From The Left Edge And 1.0 Cm From The Top Edge In 3 Solid Colours Red, Yellow And Black. 6. Printing And Text Matter: A) S.E.Railway [In English] Should Be Printed At The Left Hand Bottom Corner Keeping 2.3 Cms Space From The Left Edge And 1.0 Cms From The Bottom Edge. Font Size 18 Points. B)S.E.Railway [In Hindi] Should Be Printed At The Right Hand Bottom Corner Keeping 2.3 Cms Space From The Right Edge And 1.0 Cms From The Bottom Edge. Font Size 26 Points. C) The Printing In Light Blue Ink. The Impression Should Be Faint But Legible.Specification Of Computer Paper 15 Inch X 12 Inch , 2 Part. 1. Description: Computer Paper Size: 15 Inch X 12 Inch , 2 Part. 38.1 X 30.5 Cms., 70 Gsm, Is No:12766/97. 2. Carbon Paper Quality: Base Paper Shall Be Type - A To Is 9055/79 With Amendment. The Base Paper Shall Be Coated On One Side With Suitable Carbon Ink Necessary To Give The Required Manifolding Characteristics. 3. Perforation: Sprocket/Round Holes On Both Sides And Free From Chips.4. Monogram: Ir Logo With Diameter -2.5 Cm. 5. Colour Scheme:The Monogram Of Indian Railway Should Be Printed At The Top Left Hand Corner Keeping 2.5Cm Space From The Left Edge And 1.0 Cm From The Top Edge In 3 Solid Colours Red, Yellow And Black. 6. Printing And Text Matter: A) S.E.Railway [In English] Should Be Printed At The Left Hand Bottom Corner Keeping 2.3 Cms Space From The Left

BRR:9695173 Bids Are Invited For Custom Bid For Services Repair, Maintenance and Installation of Plant/ Systems/Equipment Replacement of Chain Sprocket Assembly and Leadscrew Assembly in Horizontal Borer Machine 5/A/71 of TXM BL-9 Replacement of Chain Sprocket Assembly and Leadscrew Assembly in Horizontal Borer Machine. Machine Name: Richards England Make, Horizontal Borer Machine No: 5/A/71 Location: Bay-I, Block-IX, TPTN Department

BRR:9691379 Bids Are invited for Tmb 000 545 0208J Ignition Switch , Tmb 2574 1511 0111 Pinion Bendix , Tmb 2574 5420 9987 Horn 12 V , Tata 2636 1540 0001 Regulator 12 V , Stln 2920 72 0000349 Isolator Switch , Tata 2751 1540 0111 Fd Coil Assy , Tata 2920 005250 Armature , Stln F 0244610 Front Hub Bearing , Tata 2573 5450 9931 Bty Isolator Switch , Tmb 3110 003190 Wheel Bearing , Mg 38860M76m00 Main Relay , Tata 2751 1540 9903 Solenoid Switch , Re 2530 001104 Chain Sprocket , Re 570282 Carburetor Assy , Tata Strome G278918130104 Assy Oil Filter , Tata Strome 278914110322 Assy Vaccum Hose Pipe , Tata 2064 5450 4901 4 St Relay 24 V , Tmb 2574 5420 9998 Speedometer Cable , Stln F 0636500 Speedometer Cable , Tata Strome 540882400120 Wiper Blade Front , Tata Strome 287054209902 Front Kit Pad Assy , Tata Strome 278909110121 Fuel Filter Cum Water Separator , Tata 2574 4215 0113 Wheel Cyl Assy , Scorpio Nk000004 Fuel Filter , Scorpio Nk000005 Horn 12 V Total Quantity : 41

BRR:9691243 Bids Are invited for Cross Assy , Air Compressor Kit , Locking Plate , Assy Release Cable , Battery Cut Off Switch , Fuel Tank Cap , Sprocket 15T , Brush Gear Assy , Drive Assy , Field Coil Assy , Mounting Engine Front , Handle Door Lock Total Quantity : 14

BRR:9686264 Tender for Removal Of Old/Worn-Out Undercarriage Assembly, Repairing Of Damaged Grove Of Track And Carrier Roller Mounting In Track Frame, Sprocket Holes And Other Track Frame Areas Etc., Assembly And Fitment Of New Undercarriage Assembly In 13 Nos. Bd355 Dozers And 2 Nos. D475a Dozer Deployed At Kusmunda Project.

BRR:9685449 Tender For Annual Plan 2025-26- Support To Farm Mechanisation Establishment Of Farm Machinery Clinic- Purchase Of Tools And Equipments For Agri Clinic At Chc Kozha , Hand Tools , A) Screwdriver Bits (26 Pcs, 25 Mm Length, S2 Steel) B) Phillips (Ph): Ph0, Ph1, Ph2, Ph3 C) Pozidriv (Pz): Pz0, Pz1, Pz2, Pz3 D) Slotted (Sl): Sl4, Sl5.5, Sl7 E) Hex (H): H2, H3, H4, H5, H6, H7, H8, H10 F) Torx (T): T10h, T15h, T20h, T25h, T27h, T30h, T40h G) Bit Holder (1 Pc) - 1/4 Hex H) Hexagonal Sockets (9 Pcs) - Sizes: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10 Mm I) Star Sockets (5 Pcs) - Sizes: E4, E5, E6, E7, E8 J) Ratchet Wrench (1 Pc) - 1/4 Drive, 45 Teeth (Reversible) K) Extension Bars (3 Pcs) - Lengths: 50 Mm (2), 100 Mm (4), 150 Mm (6) L) Universal Joint (1 Pc) - 1/4 Drive M) Three-Way Adaptor (1 Pc) - 3/8 Female × 1/4 Male N) Spinner Handle (1 Pc) - 1/4 × 150 Mm O) Flexible Extension Bar (1 Pc) - 1/4 × 150 Mm 4. Combination Spanners (17 Pcs) - Sizes: 6, To 24 Mm 5. Flare Nut Spanners (5 Pcs) - Sizes: 8×10, 10×12, 11×13, 12×14, 17×19 Mm 6. Hex Key Set (10 Pcs) - Sizes: 2.5, 3, 4, 5, 6, 7, 8, 10, 12, 14 Mm 7. Machinist Hammer (1 Pc) - 300 G With Fiberglass Or Wooden Handle 8. Combination Pliers (1 Pc) - 7 9. Locking Pliers (1 Pc) - 10 Curved Jaw Lock Wrench 10. Slotted Screwdrivers (2 Pcs) - Sl6.5 × 100 Mm And Sl6.5 × 150 Mm 11. Phillips Screwdrivers (2 Pcs) - Ph2 × 100 Mm And Ph2 × 150 Mm 12. Stubby Screwdrivers (2 Pcs) - Ph2 × 38 Mm And Sl6.5 × 38 Mm All Sockets, Spanners, And Ratchets Shall Be Made From Chrome Vanadium Steel (Cr-V), Heat-Treated, And Chrome-Plated For Corrosion Resistance. Screwdriver Bits Shall Be Of S2 Alloy Steel For High Torque Resistance. Ratchets Shall Have A Minimum Of 45 Teeth With A Quick-Release And Reversible Mechanism. All Tools Shall Conform To Din / Iso Standards Or Equivalent. Suitcase Colour Should Be Standard Industrial Colour (Black / Blue / Grey Or Similar) , Tee Spanner Set Including Spanners Ranging From 8 Mm To 19 Mm Made From Chrome Vanadium Steel (Cr-V), Hardened And Tempered For Durability, The Handle Shall Be T-Shaped, Providing Maximum Torque And Grip And Surface Finish Shall Be Nickel-Chrome Plated For Corrosion Resistance. , Deep Socket Set Consist Of Sockets From 8 Mm To 22 Mm, Made Of Chrome Vanadium Steel, Fully Hardened, Tempered, And Chrome-Plated, The Sockets Shall Have Six-Point Or Twelve-Point Configurations For High Torque Applications, Suitable For Use With Ratchet Handles And Extension Bars. , Combination Plier 6 Manufactured From High-Grade Alloy Steel, With Precision Machined Jaws, Cutting Edges Induction-Hardened For Long Life. Handles Shall Be Double-Dipped With Insulated Grips For Comfort And Safety. , Combination Plier 8 Manufactured From High-Grade Alloy Steel, With Precision Machined Jaws, Cutting Edges Induction-Hardened For Long Life. Handles Shall Be Double-Dipped With Insulated Grips For Comfort And Safety. , Circlip Plier Internal 7 Made Of High-Grade Alloy Steel, With Spring-Loaded Return And Polished Tips For Easy Installation And Removal Of Internal Retaining Rings, Handle Grips Shall Be Pvc Or Rubber-Coated. , Circlip Plier External 7 Made Of High-Grade Alloy Steel, With Spring-Loaded Return And Polished Tips For Easy Installation And Removal Of Internal Retaining Rings, Handle Grips Shall Be Pvc Or Rubber-Coated. , Locking Plier (Vice Grip Type) 10 With Drop-Forged Steel Jaws With Heat-Treated Teeth For Firm Gripping, Include An Adjustable Screw And Quick-Release Lever, Nickel-Plated Surface For Corrosion Protection. , Diagonal Cutting Pliers, 6, Made Of Forged Alloy Steel, With Induction-Hardened Cutting Edges And Insulated Handles Suitable For Cutting Wires And Small Metal Parts. , Long Nose Plier 6 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 6 Overall Length, With Insulated Handles. , Long Nose Plier 8 Made Of Forged Alloy Steel With Slim Tapered Jaws For Precision Gripping And Cutting In Confined Spaces, 8 Overall Length, With Insulated Handles. , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 40 Mm Diameter Made Of Cast Iron Body With Drop-Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated. , Adjustable Pipe Wrench Suitable For Gripping Pipes Up To 75 Mm Diameter Made Of Cast Iron Body With Drop-Forged Steel Jaws, Serrated And Induction-Hardened And Handle Painted Or Powder-Coated. , Heavy-Duty Pipe Wrench With Jaw Opening Up To 110 Mm Made Of Forged Alloy Steel, Precision-Machined Teeth For Firm Grip, Designed For Mechanical And Plumbing Use. , Heavy-Duty Filter Wrench With High-Tensile Rubber Or Nylon Strap And Steel Handle For Removing Large Oil/Fuel Filters, Handle Length: Minimum 300 Mm. Suitable For Heavy Machinery Maintenance. , Medium-Duty Filter Wrench With Adjustable Steel Band And Handle, Suitable For Medium-Sized Oil Filters. Chrome-Plated Finish With Non-Slip Grip. , Ball Pein Hammer With 300 Gm Forged Steel Head, Hardened And Tempered. Fitted With A Strong Fiberglass Handle Suitable For Riveting, Striking, And Metal Forming. , Soft Face Hammer With Dual Rubber Striking Faces To Prevent Surface Damage. Head Weight Approx. 300-500 Gm, Handle Made Of Fiberglass , Non-Marring Mallet Hammer With Rubber Or Plastic Head 40 Mm And Sturdy Handle. Head Weight Approx. 1 Kg. Suitable For Precision Fitting Without Metal Deformation. , Sledge Hammer With 500 Gm (2 Lb) Drop-Forged Steel Head, Hardened And Tempered. Handle Of Strong Wooden Or Fiberglass Construction, Securely Fixed To Head. , Cold Chisels Made Of Chrome Vanadium Or Carbon Steel (18 Mm Dia Approax) , Hardened And Tempered To 58-60 Hrc. Size 25 Mm, Length 300 Mm, Approax Weight 500 Gm Ground Cutting Edge With Anti-Slip Striking End. , Steel Wedges, Hardened And Ground, Used For Splitting Or Aligning. Made Of Forged Alloy Steel With A Rust-Resistant Finish 230 Mm Length 1.5 Kg. , Adjustable Torque Wrench With Working Range 25-135 Nm. Drive Size 3/8 Or 1/2, Accuracy ±4% Of Indicated Value With Reversible Ratchet And Quick-Release Mechanism. , Heavy-Duty Adjustable Torque Wrench, Range 70-340 Nm. 1/2 Drive, Accuracy ±4%, Chrome Vanadium Construction With Calibration Certificate. , High-Capacity Torque Wrench, Range 135-540 Nm. 3/4 Drive, Accuracy ±4%, Knurled Handle For Non-Slip Grip, Supplied With Protective Case And Calibration Certificate. , Measuring Tools , Steel Scale Set (5 Nos) Made Of High-Quality Tempered Stainless Steel With Etched And Permanently Engraved Graduations In Both Metric (Mm/Cm) And Inch Units. Straight, With Accurately Ground Edges And Smooth Surfaces, Graduation Accuracy Shall Conform To Is 1481:1970 Or Equivalent. Lengths : 150 Mm, 300 Mm, 600 Mm, 450 Mm, 1000 Mm. Each Scale Shall Have Clear Visibility Markings And Corrosion-Resistant Satin Chrome Finish. , Vernier Calipers Made Of Stainless Steel, Precision-Ground And Finished, With A Measuring Range Of 0-200 Mm And Least Count 0.02 Mm / 0.001 Inch Capable Of Internal, External, Depth, And Step Measurements. Vernier Scale And Main Scale Markings Shall Be Clearly Etched For Long-Term Readability. The Instrument Shall Conform To Is 3651:1981 Or Din 862 Standards. A Locking Screw Shall Be Provided For Measurement Retention, And The Tool Shall Be Supplied In A Protective Case. , Outside Micrometer (0-25 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Outside Micrometer (25-50 Mm Range) Of Mechanical Analog Type, Conforming To Is 2967:1975 Or Din 863 Standards. The Frame Shall Be Rigid And Heat-Insulated, With Carbide-Tipped Measuring Faces, A Friction Thimble, And A Ratchet Stop For Consistent Measuring Pressure. The Least Count Shall Be 0.01 Mm, And The Thimble And Sleeve Shall Have Clearly Graduated Markings. The Micrometer Shall Be Supplied With A Setting Standard And Calibration Certificate. , Feeler Gauges Made Of Hardened And Tempered Spring Steel, Precision-Ground To Required Thickness, And Permanently Marked With Size Values. The Set Shall Include Multiple 75 Mm Long Blades Of 30 Different Thicknesses 0.03 Mm To 1.00 Mm Assembled In A Steel Holder With Pivot. Each Blade Shall Be Rust-Resistant And Polished For Smooth Operation. The Gauge Shall Conform To Is 3179:1982 Or Equivalent Standards. , Wire Gauge (Standard Bs 1505 Type) Manufactured From Hardened And Tempered Steel With Precisely Cut Slots For Wire Sizes 1 To 36 Swg. The Gauge Shall Be Circular Or Rectangular In Shape With Permanent Engraved Markings. The Tool Shall Comply With Bs 3737 / Is 3177 Standards For Accuracy. Surface Shall Be Satin Chrome Or Nickel Plated To Resist Corrosion Suitable For Measuring Diameters Of Wires, Rods, And Drill Bits. , Inside Calipers Shall Be Made Of Forged Steel Or Stainless Steel, Polished And Hardened. The Legs Shall Have Finely Ground Points With A Pivot Joint And Tension Adjustment For Smooth Movement. Measuring Range: 20-170 Mm Suitable For Measuring Internal Dimensions And Bore Diameters. Shall Conform To Is 3564:1985 Standards. , Outside Calipers Made Of High-Grade Carbon Or Stainless Steel With Hardened Tips, Spring Joint, And Knurled Adjustment Nut For Precision. Shall Conform To Is 3564:1985 Or Equivalent Standards. Surface Finish: Polished Or Chrome-Plated. 12 Inch Size , Centre Punch Manufactured As Per Is 7177 - 1999 Or Equivalent, Made Of High Carbon Or Alloy Tool Steel, Hardened And Tempered At The Striking End And Point. Length: Approximately 150 Mm, Approximate Weight 160 Gm With Point Angle Of 60° ± 2°. The Striking End Shall Be Chamfered To Prevent Mushrooming. Surface Finish Shall Be Black Oxide Or Polished. Suitable For Marking Centers On Metal Surfaces Before Drilling Operations. , Portable Digital Non-Contact Tachometer Of Reputed Make, With A Non-Contact Measuring Range Of Approximately 10 To 99,999 Rpm And Accuracy Not Inferior To ±0.04% ±2 Digits. Equipped With A Digital Lcd Display, Data Hold, Counting Function, And Computer/Usb Interface For Data Transfer, A Working Distance Of Around 0.2 M With A ±30° Working Angle, Reflective Tape, Interface Cable, And Carrying Case. Conforming To Iec 61010-1 / Is 13875. , Auto Electrial And Pump , Portable True-Rms Digital Multimeter Of High-Accuracy, Capable Of Measuring Ac/Dc Voltage Up To 1000 V, Ac/Dc Current Up To 10 A, Resistance, Capacitance, Frequency, Diode, And Continuity. The Meter Should Have Features Like Auto-Ranging, Data-Hold, Min/Max, And Relative Measurement Functions With A Large Back-Lit Display Of Minimum 4000 Counts Or Higher. The Instrument Shall Have Overload Protection, Fused Input Terminals, And Comply With Safety Category Cat Iii 1000 V Or Cat Iv 600 V As Per Iec 61010-1. The Unit Shall Be Housed In A Protective Insulated Casing Suitable For Field Use And Supplied Complete With Test Leads, Batteries, Protective Case, And Calibration Certificate. , Handheld Clamp Meter (True-Rms Type) Designed For Measurement Of Ac And Dc Currents Up To 1000 A, With Additional Functions For Ac/Dc Voltage, Resistance, Frequency, And Continuity. The Jaw Opening Shall Accommodate Conductors Up To 40-60 Mm In Diameter. The Meter Shall Feature A Large Digital Display, Auto-Range Selection, Data-Hold And Peak Capture Functions, And Have An Accuracy Of ±2 % Or Better. It Shall Meet Cat Iii 1000 V / Cat Iv 600 V Safety Standards, Include Overload And Transient Protection, And Be Built In A Shock-Resistant Insulated Body. The Clamp Meter Shall Be Supplied With Test Leads, Carrying Pouch, And Calibration Certificate. , Handheld Vibration Meter Shall Be Capable Of Measuring Vibration Velocity, Displacement, And Acceleration Within A Frequency Range Of 10 Hz To 1 Khz Or Higher Complying Iso 2954. The Instrument Shall Display Rms Or Peak Values In Standard Engineering Units (Mm/S, ?M, M/S²). It Shall Feature A Detachable Accelerometer Probe, Communicate With Pc Computer For Statistics And Printing By The Optional Cable And The Software. The Device Shall Be Compact, Battery-Operated, And Suitable For Predictive Maintenance Of Rotating Machinery. It Shall Be Supplied With Transducer, Magnetic Base, Extension Cable, And Carrying Case. , Wire Strippers Suitable For Removing Insulation From Copper Conductors Ranging From 0.5 Mm² To 6 Mm² , Ratchet-Type Crimping Tool Designed For Insulated And Non-Insulated Terminals 1.5 Mm² To 10 Mm², With Interchangeable Dies And Ergonomic Handles.Alloy Steel Duly Hardened & Tempered , Heavy-Duty Mechanical Or Ratchet Type Cable Cutters Suitable For Cutting Copper And Aluminium Cables Up To 300 Mm² , Soldering Iron Shall Be Of 40 W Capacity Insulated Handle. Cable Lugs And Ferrules Shall Be Of Tinned Copper, Crimp Type, Conforming To Din 46234/46235 Standards , Infrared Thermometer (Ir Gun) Shall Measure From -50 °C To +550 °C With Laser Targeting And Digital Display. Should Have Rugged, Insulated Housings And Be Supplied With Charger, Carry Case, And Calibration Certificate. , Battery Load Tester (12V) Shall Provide Controlled Load Up To 2-200 Ah To Assess Battery Condition By Measuring Voltage Drop And Internal Resistance Instruments Shall Have Clear Displays, Polarity Protection, Insulated Clamps, And Rugged Enclosures For Workshop Use. , Smart Battery Charger Shall Provide Automatic Multi-Stage Charging For 12 V Batteries With Protections For Overcharge And Polarity Reversal. , Tractor And Automobile , Manual Engine Stand Fabricated From High-Strength Heavy-Duty Mild Steel Tubular Sections, Finished With Powder Coating For Corrosion Resistance And Durability With A Lifting Capacity Of 2000 Lbs (Approximately 900 Kg), A Manual Locking Mechanism For Secure Positioning, And Four Swivel Casters For Easy Mobility And Stability. The Equipment Shall Conform To The General Safety And Design Provisions Of Is 8610:1977 (Automobile Service Equipment - Engine Stand) Or Equivalent International Standards, Ensuring Mechanical Stability, Ease Of Rotation, And Operator Safety. , Spring Compressor - Head Valve Type, Of Reputed Make Made Of High-Strength Carbon Steel With A Corrosion-Resistant Finish, Having An Overall Length Of Approximately 750 Mm And Weight Around 700 G Conforming To Relevant Standards For Hand Tools Such As Is 5781 / Is 6131 / Iso 6787 Or Equivalent. , Piston Ring Compressor (Set Of 3) Of Reputed Make, Made Of Hardened And Tempered Alloy Or Carbon Steel With A Polished Or Chrome-Plated Corrosion-Resistant Finish, And Provided With A Ratchet Or Key-Type Locking Mechanism For Uniform Compression And Easy Releasewith An Adjustable Diameter Range Suitable For Standard Engine Pistons (50 Mm To 125 Mm With 75 Mm Height, 90 Mm To 175 Mm With 100 Mm Height, And 90 Mm To 175 Mm With 150 Mm Height), Conforming To Relevant Standards Such As Is 7347 / Iso 1174 To Be Supplied Complete With Necessary Tightening Wrench Or Handle. , Portable Diesel Injector Nozzle Pop Tester, With A Dual-Scale Pressure Gauge (0-400 Bar / 0-6000 Psi), A Manual Hydraulic System With An Oil Cup Capacity Of 0.8 Litres, Constructed From High-Grade Plastic, And A Rugged Metallic Pump Body, Approximate Weight Of 4.25 Kg, Conforms To Iso 4113 (Calibration Fluid For Diesel Injection Equipment) And Iso 4008-1 / Iso 4008-2 (Diesel Fuel Injection Test Equipment - Testing Of Injection Pumps And Injectors). , Injector Puller Set (8 Pcs), Including Eight Precision-Engineered Oxidized Carbon Steel Components Comprising An Inertia Hammer, A Joint For Accessing Hard-To-Reach Areas, And Six Threaded Adapters With Sizes M12×1.75, M17×1, And M27×1, Ensuring Compatibility With Injectors From Major Manufacturers, Hammer Length Of 350 Mm All Conforms To Iso 6789:2017 (Torque Tools - Requirements And Test Methods) And Din 3122 (Hand-Operated Tools For Mechanical Drive). , Mechanical Puller (3?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 3 Inch (76.2 Mm), With A Spread Of Approximately 76 Mm, Reach Of About 65 Mm, And Working Diameter Range From 15 Mm To 80 Mm, Threaded Spindle Length 125 Mm, Conforming To Is 6149 / Iso 2985 Standards. , Mechanical Puller (8?, 2/3-Jaw, Double Ended) Of Reputed Make Made Of Hardened And Tempered Alloy Or Carbon Steel And Finished With Corrosion-Resistant Coating, With Interchangeable 2-Jaw And 3-Jaw Configuration, Allowing Both Internal And External Gripping Applications, Nominal Jaw Size Shall Be 8 Inch (203.2 Mm), With A Spread Of Approximately 203 Mm, Reach Of About 177 Mm, And Working Diameter Range From 30 Mm To 210 Mm, Threaded Spindle Length 174 Mm, Conforming To Is 6149 / Iso 2985 Standards. , Clutch Alignment Tool Of Reputed Make, Made Of Durable Carbon Steel, Resistant To Wear And Corrosion, And Capable Of Withstanding Repeated Workshop Use. The Tool Shall Be Adjustable Or Provided In A Set To Suit Various Pilot Bearing And Clutch Plate Diameters (Approximately 14 Mm To 28 Mm Or Equivalent Range), Conforming To Is 7347 / Iso 1174 Or Equivalent For Hand Tools, , Valve Seat & Face Cutter Set Of Seat Cutters, Face Cutters, Arbors, And Pilots (20 Nos) Of High-Grade Alloy Steel With Precision-Ground Cutting Edges, Hardened And Tempered To Maintain Cutting Efficiency, Conforms To Is 5517:1993 (Specification For Cutting Tools - General Requirements) And Iso 513 (Classification And Application Of Cutting Tool Materials) , T-Handle Spark Plug Socket Wrench (21 Mm) Carbon Steel With A Chrome-Plated Finish, With A 360-Degree Swivel Head For Flexible Operation, A Plastic Grip On The T-Handle, A Rubber Insert Within The Socket, An Approximate Weight Of 110 Grams, And Conforming To Relevant Standards For Hand Tools. , 10Pcs Carburetor Adjusting Tool Kit Including: 21-Teeth Splined, 7-Teeth Splined, Single D, Small Head Single D, Double D, Pac Man, Small Head Pac Ma,N Hexagon Shaped, Six Star, And Carburetor Cleaning Tools All Made Of High-Quality Stainless Steel Wear Resistant And Long Lasting With Ergonomic Handle Comfortable To Grip And Stable To Use. , The Heavy-Duty Spark Plug Cleaner And Tester Designed To Clean And Test Spark Plugs Under Simulated Engine Conditions, Operates On A 220 V Ac Supply And Incorporates A 12 V / 12 Kv Ignition Coil For Spark Generation And A 220 V / 12 V Electronic Vibrator For Cleaning Including A Pressurized Testing Chamber With A Working Pressure Of Up To 12 Kgf/Cm² And A Separate Abrasive Cleaning Chamber Equipped With A Double-Acting Valve For Blasting And Dust Removal, Should Be Compatible With Spark Plug Sizes M10, M12, M14, And M18 Through Interchangeable Rubber Adapters And Features A Pressure Regulator For Maintaining Safe And Consistent Operation. Product Should Conform To General Standards For Electrical Safety And Workshop Equipment, Such As Is 302 (Part 1): Safety Of Electrical Equipment, Is 10326: Automotive Service Equipment - Spark Plug Testers, Or Equivalent International Standards , Portable Fuel And Vacuum Gauge Tester Kit For Testing Fuel Pump Pressure, Fuel Pump Vacuum, Carburettor Intake, And Manifold Vacuum Systems In Petrol Engines With Dual Gauges - A Pressure Gauge Ranging From 0 To 10 Psi (0-0.7 Kg/Cm²) And A Vacuum Gauge Ranging From 0 To 28 In-Hg (0-70 Cm-Hg) - For Accurate Measurement Of Engine Fuel And Air System Performance, With Standard Automotive Fittings For Quick Connection To Various Fuel And Vacuum Lines And Conforming To Is 1446: Automotive Test Equipment - Pressure And Vacuum Gauges Or Equivalent International Standards Like Sae J1812 For Fuel System Testing Instruments. , Petrol Engine Compression Tester Kit (400 Mm) Including Threaded Adaptors In Sizes M10, M12, M14, And M18, Along With Two Rubber Cone Ends For Both Threaded And Non-Threaded Testing, Equipped With Straight And Angled Push-On Connectors And A 400 Mm Flexible Hose, To Diagnose Issues Related To Piston Rings, Valves, Or Head Gaskets, Suitable For Cars, Motorcycles, And Small Petrol Engines. , Heavy-Duty Sprocket Chain Breaker And Splitter Tool Suitable For Breaking, Splitting, And Repairing Chains Of Size 420 To 530 Made Of High-Grade Carbon Steel , Compact Chain Saw Grinder For Precise Grinding Of Chain Saw Blades For A Rated Voltage Of 220-230 V At 50/60 Hz, With An Input Power Of 300 W And A No-Load Speed Of 8400 Rpm, Equipped With A 100 Mm Grinding Wheel Suitable For Most Standard Chain Saw Chains, Weighing Around 2.5 Kg, Conforming To General Safety And Performance Standards Such As Is 302 (Part 2/Sec 201): Electrical Safety For Hand-Held Tools And Iec 60745-2-4 , Soldering Station Operating On A 220-240 V Ac, 50/60 Hz Supply, Input Power Of 60 W, With A Preheat Time Of Approximately 1 Minute, Digital Temperature Display, Adjustable And Thermostatic Temperature Control Via A Rotary Knob, Built-In Ceramic Heating Element, A Straight Tip Head, A Durable Stand For Iron Placement, Packed In A Color Box, Conforms To Iec 60335-2-45: Household And Similar Electrical Appliances - Safety Of Portable Heating Tools And Iec 61340-5-1: Protection Of Electronic Devices . , Compact, Durable, And Easy To Operate Portable High-Pressure Hand-Operated Portable Grease Pump With A 10 Kg Grease Capacity And Delivers A Material Output Of Approximately 3 Grams Per Stroke, Maximum Block Pressure Of 140 Kg/Cm², A 2-Meter High-Pressure Rubber Hose Fitted With End Connections. , Double Piston Lever Grease Gun Delivering Up To 2.4 Grams Of Grease Per Stroke, Pressures Up To 6000 Psi, With A Double-Piston Mechanism, Compact And Lightweight (Approx. 2 Kg). , Durable And Easy-To-Use Steel Lubrication Oil Dispenser Can For Smooth And Controlled Lubrication With A 500 Ml Capacity, Made From High-Quality Steel With A Powder-Coated Finish, The Can Is Lightweight (Approx. 200 G), Waterproof, And Ergonomically Designed For Comfortable Handling And Precise Oil Flow. , Power Tools And Equipment , Corded Type Electric Impact Wrench Conforming To Is 7151:1983 / Iec 60745-2-2 [Vibration (=11.5 M/S²), And Noise (104 Db(A))], With A Continuous Input Rating Of 400 W,. It Shall Provide A Maximum Fastening Torque Of 350 N·M, With A No-Load Speed Of 2000 Rpm And Impact Rate Of 2000 Blows Per Minute, 12.7 Mm (½) Square Drive, A 2.5 M Power Supply Cord. The Housing In Impact-Resistant Polymer With Reinforced Internal Metal Gear Casing, Suitable For Tightening And Loosening Ensuring Efficient Operation For Both Standard (M12-M22) And High-Strength Bolts (M12-M16) In Vehicle And Machinery Maintenance Applications , Heavy-Duty Angle Grinder, Of Reputed Make, Single Phase 220-240 V, 50/60 Hz Ac Supply, Input Power 2200 W No-Load Speed 8500 Rpm To Use With 180 Mm (7) Diameter Abrasive Wheels, And Equipped With Side Handle, Wheel Guard, And Spindle Lock A 2.0 M Power Supply Cord And Conforming To Is 7554 / Iec 60745-2-3 / Iso 11148-7 Or Equivalent Standards (Low Vibration Level (=6.5 M/S²), Sound Pressure Level Not Exceeding 91 Db(A)). , Electric Power Drill (Corded Type) Of Reputed Make, Single Phase 220-240 V, 50 Hz Ac Supply, 350 W And Variable Speed Range Up To 3000 Rpm (No Load). Including A Pistol-Grip Body, Keyed Or Keyless Chuck, And A 2.0 M Power Supply Cord Complying With Is 7554 / Iec 60745 / Iso 11148 Or Equivalent Standards, [Low Vibration (=3.0 M/S²) And Sound Pressure Level Below 80 Db(A)] Supplied Complete With Chuck Key, Side Handle (If Applicable), And Instruction Manual. , Portable Electric Heat Gun Powered By An 1800 W Motor Operating At 230 V Ac, For Adjustable Airflow Between 350-550 L/Min And A Working Temperature Range Of 60°C To 550°C, Selectable In Three Stages (60/350/550°C), Achieves Full Heat-Up Within 1 Minute, With A Heat-Resistant Plastic Body And Heat Isolation Cap, Weighs 750 G And Features A 2 M Cord Length And Conforming To Iec 60335-2-45: Household And Similar Electrical Appliances - Safety Of Portable Heating Tools And Iec 61000-3-11/12: Electromagnetic Compatibility Standards. , Portable Air Compressor, Of Reputed Make, Single Phase 230 V, 50 Hz Ac Supply, Fitted With An Electric Motor Of 2.0 Hp (1.5 Kw) A Maximum Working Pressure Of 8 Bar, Free Air Delivery Not Less Than 200 Lpm (7.2 Cfm), And A Motor Speed Of 2850 Rpm. Air Receiver Tank Of 50 Liters Capacity, Conforming To Is 5456 / Is 2825 Standards And The Compressor Shall Conform To Is 10437 / Iso 1217, And Fitted With Pressure Gauge, Safety Valve, Drain Valve, And Automatic Pressure Switch. The Complete Unit Shall Be Portable, Vibration-Damped, And Equipped With Wheels And Handle For Easy Movement. , Single Phase Annual Rate Contract Welding Machine Of Reputed Make, With Inverter-Based Igbt Technology To Be Operated On Ac 220V ±15%, 50/60 Hz Single Phase Supply And Deliver A Welding Output Current Up To 400 Annual Periodical Maintenance With A Duty Cycle Of Not Less Than 60%, An Efficiency Of Minimum 80% And Power Factor Not Less Than 0.73, With Insulation Class F And Protection Grade Ip21 As Per Is 2879 / Is 3024 Or Equivalent International Standards. And Necessary Accessories Such As Welding Cable, Electrode Holder, And Earth Clamp Etc. Should Be Included. , Mig (Metal Inert Gas) Welding Machine Of Reputed Make, Operate On Single Phase Ac 220V ±15%, 50/60 Hz Having An Output Current Range Of 20-300 Annual Periodical Maintenance With A Duty Cycle Not Less Than 60%, No-Load Voltage Of Approximately 60 V Rated Input Current Of About 19.8 A, Power Factor Not Less Than 0.93, Efficiency Of At Least 85%, Housing Protection Shall Be Minimum Ip21 Conforming To Class F, And, As Per Is 10178 / Is 2879 / Is 3024 , Bench Grinder, Of Reputed Make, Single Phase 220-240 V, 50 Hz Ac Supply Equipped With A 350 W Induction Motor Of 2950 Rpm. Two 200 Mm Diameter Grinding Wheels Each Provided With Eye Shields And Wheel Guards, Heavy-Duty Aluminum Base With Tool Rest, Tool Storage Box, And Safety Accessories Etc. Complete Conforming To Is 302 / Is 6932 / Iec 61029 Or Equivalent. , Furniture And General , Bench Vice Of Heavy-Duty Engineers Type, Suitable For Fitting And General Workshop Applications With Jaw Width 125 Mm (5 Inches), With Replaceable Serrated Hardened Steel Jaws For A Firm Grip On Workpieces, The Body And Sliding Jaw Shall Be Made From High-Grade Cast Iron Or Forged Steel, Precision Machined To Ensure Smooth Operation And Alignment. The Vice Shall Be Equipped With A Large-Diameter Acme-Threaded Spindle And Steel Handle With Knurled Ends For Easy Tightening (1600 Kg Tightening Force) And Release. The Vice Includes A 360° Swivel Base With Locking Mechanism, Allowing Positioning And Adjustment As Required During Work. The Anvil Surface On The Rear Shall Be Machined And Hardened, Suitable For Light Hammering Operations. The Vice Shall Have A Clamping Capacity Of At Least 150 Mm, And All Moving Parts Shall Be Protected Against Rust And Corrosion By Paint Or Plating. The Bench Vice Should Be Suitable For Mounting On Heavy-Duty Wooden Or Steel Workbenches And Capable Of Withstanding Heavy Mechanical Use In Workshops And Maintenance Facilities. It Shall Conform To Is: 2586 (Specification For Bench Vices, Heavy Duty) Or Equivalent Standard. , Removable And Corrosion-Resistant Drip Tray Of Size 1200 Mm (L) × 600 Mm (W) × 40 Mm (H) Fabricated From Galvanized Steel Sheet Of Minimum 1.6 Mm Thickness Or 304-Grade Stainless Steel, Ensuring Long Service Life And Resistance To Rust And Chemical Attack, Suitable To Collect Oil, Fuel, And Coolant Spills During Small Engine Maintenance Operations. The Edges Should Be Folded And Reinforced To Prevent Deformation And Improve Rigidity, The Corners Shall Be Welded And Leak-Proof, And The Base Shall Be Slightly Inclined (1-2° Slope) To Facilitate Drainage. It Should Include A Removable Drain Plug Or Outlet Provision (½ Bsp) For Easy Cleaning And Disposal Of Collected Fluids. The Surface Shall Be Smooth, Easy To Clean, And Oil-Resistant, Suitable For Workshop Environments Handling Petrol And Diesel Engines. , Heavy-Duty Roller Tool Cabinet With 4 Drawers And One Cupboard Suitable For Use In Mechanical, Workshops For Organized Storage Of Hand Tools, Instruments, And Accessories Made Of High-Quality Cold-Rolled Steel Sheet With A Cabinet Body Thickness Of 0.8-1.0 Mm And Drawer Sheet Thickness Of 0.7 Mm, With An Overall Size Of 765 Mm (L) × 465 Mm (W) × 812 Mm (H) And An Overall Height Of 976 Mm Including Casters. Drawers Of Size 536 Mm (L) × 410 Mm (W) × 74.5 Mm (H), Mounted On Precision Ball-Bearing Slides And The Top Panel Area Should Be Suitable For Tool Placement During Maintenance Work. The Unit Should Be Mounted On Four Heavy-Duty Casters Of Size 5? × 2?, Two Of Which Shall Be Swivel Casters With Locking Brakes For Easy Mobility And Stability During Use. The Cabinet Shall Include A Central Locking System For All Drawers, Should Be Surface-Treated With Powder Coating For Corrosion Resistance And A Smooth Finish. The Tool Cabinet Shall Conform, Where Applicable, To The General Guidelines Of Is 7155 (Industrial Trolleys And Cabinets) And Iso 9001:2015 Quality Manufacturing Standards. , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 16 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants. , Oil Drain Pan Made Of High-Density Polyethylene (Hdpe) With A Capacity Of 8 Litres Including Integrated Handles, A Pouring Spout, And Anti-Spill Lips To Prevent Leakage During Draining Suitable For Chemical Resistance To Engine Oil, Transmission Fluids, And Coolants. , Rack For Batteries, Made Of Well-Seasoned Hardwood Or Marine Plywood With Sturdy Ms Frame Or Wooden Supports. Includes 3-4 Ventilated Shelves With Acid-Resistant Coating And Removable Rubber Or Pvc Mat. Designed To Hold Multiple Batteries Safely And Prevent Corrosion. Approx. Size: 1500 Mm × 1000 Mm × 450 Mm. , Rack For Lubricants Constructed From Treated Wood Or Plywood Frame With Raised-Edge Shelves To Contain Spills. Each Shelf Shall Carry At Least 100 Kg And Be Coated With Oil-Resistant Paint. Suitable For 1-20 L Containers. Approx. Size: 1800 Mm × 1200 Mm × 450 Mm. , Rack For Spares Fabricated From High-Quality Wood Or Plywood With Ms Reinforcement. Includes Adjustable Or Fixed Shelves (3-5 Tiers), Each Supporting Up To 150 Kg (Udl). Finished With Protective Paint Or Polish For Workshop Use. Approx. Size: 2000 Mm × 900 Mm × 450 Mm. , Industrial Wet And Dry Type Vacuum Cleaner With A Power Rating Of 1500 W And Operating Voltage Of 220-240 V, 50 Hz, Suitable For Workshop And Service Bay Cleaning Applications With A Capacity Of 35 Litres, A Vacuum Suction Pressure Of 200 Mbar And An Airflow Rate Of 53 L/S, Ensuring High-Efficiency Dust And Liquid Removal. The Tank Should Be Made Of Corrosion-Resistant Stainless Steel (Minimum Ss 304 Grade) With Heavy-Duty Caster Wheels For Mobility. It Should Be Provided With A Flexible 5 M Power Cable, Washable Filters, Blower Function, And Accessories For Both Wet And Dry Operation. The Vacuum Cleaner Shall Conform To Iec 60335-2-69 (Safety For Wet And Dry Vacuum Cleaners For Commercial Use) Or Equivalent Indian Standard Is 11621:1986, And Include Overload And Thermal Protection Features For Motor Safety. , Portable, Electric-Operated Industrial Pressure Washer Conforming To Iec 60335-2-79 / Is 8442 With A Power Rating Of 1700 W (230 V, 50 Hz Single-Phase Supply) And A Maximum Working Pressure Of 130 Bar And A Flow Rate Of 7 Litres Per Minute, With Self-Priming Capability Of 0.5 M, High-Pressure Foam Detergent System, 6 M Pvc Hose, Manual Hose Reel, 5 M Power Cable, 3-In-1 Nozzle And Ergonomic Handle , Industrial Locker Cabinet (24-Door Type), Fabricated From 22-Gauge Mild Steel Sheet Pre-Treated And Powder-Coated For Corrosion Resistance And Smooth Finish With A Rigid Frame Structure, Each Locker Compartment With Individual Mechanical Key Locks Shall Measure Approximately 18 (D) × 12 (W) × 12 (H), With A Total Cabinet Size Of About 18 (D) × 48 (W) × 78 (H). A Load Capacity Of Minimum 10 Kg Including Ventilation Slots And Numbering Provision For Each Compartment , Safety , Abc Powder Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4 Kg Suitable For Class A Fires. Dry Chemical Powder (Mono Ammonium Phosphate) Based, Stored Pressure Type With Working Pressure Of 15 Bar, Suitable For Electrical And Combustible Material Fires.Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Co2 Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 4.5 Kg Suitable For Class B Fires . Carbon Dioxide Gas Type With Seamless High-Pressure Steel Cylinder Conforming To Is 7285, Discharge Hose With Horn, And Designed For Electrical And Flammable Liquid Fires. Extinguisher Sould Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Foam Type Fire Extinguishers, Is 15683:2018 Compliant, Portable Type With A Minimum Capacity Of 9 L, Suitable For Class C Fires. Stored Pressure Or Cartridge Type Using Aqueous Film-Forming Foam Suitable For Flammable Liquid Fires. Extinguisher Should Have Isi Certification, Pressure Gauge, Discharge Nozzle, Wall Mounting Brackets, And Color Coding As Per Is 2190. They Shall Be Factory-Filled, Tested At Twice Working Pressure, And Supplied With Inspection Tag And Instruction Label. , Fire Blanket Shall Be Made Of 840 Gsm Glass Fiber Or Kevlar-Coated Woven Fabric, Resistant To Temperatures Up To 550°C, Conforming To Is 11871 / Bs En 1869, And Provided In A Quick-Release Wall-Mount Case. Standard Blanket Size: 2.00 M × 1.00 M For Personnel Protection And Small Fire Suppression. , First Aid Box Of Size 32.5(H) X 28.5(W) X 8(D) Cmshall Conform To Is 13154 (Part 1-3), Made Of Powder-Coated Metal, Gi Or Abs Plastic, Waterproof And Corrosion Resistant, To Keep All Essential Medical Supplies For Industrial Workshops (Bandages, Antiseptics, Gauze, Adhesive Strips, Scissors, Burn Cream, Splints, Sterile Pads, And Cpr Mask). , Eye Wash Station Wall Mount Type, Made Of Stainless Steel Push Plate 12.7 Mm (1/2 Inch Bsp) Inlet, 4810 Ss, Providing Continuous Flow At 1.5 L/Min Per Outlet, Operated By A Push Plate, Complying With Ansi Z358.1 / Is 10592. , Foldable Stretcher Shall Be Lightweight Aluminum Or High-Tensile Steel Frame With Washable Canvas Sheet, Capable Of Carrying 120 Kg Load, Fitted With Safety Straps And Rubber Handles, Conforming To Is 1904 / En 1865. , Ppe: Helmets Hdpe Or Abs Shell, Is 2925 Compliant, Chin Strap, Sweatband, Impact-Resistant Up To 50 Joules. , Ppe: Goggles Polycarbonate Lenses, Anti-Scratch And Uv-Resistant, Is 5983 / En 166 Compliant, Side Shields. , Ppe Industrial Gloves: For Mechanical Work-Leather Or Nitrile (Is 6994); For Chemical Work-Pvc/Neoprene (En 374); For Electrical Insulation-Rubber Class 0 (Is 4770). , Ppe: Safety Boots Confirming To Is 15298 / En 20345 Compliant, Steel/Composite Toe Cap (200 J Impact), Oil- And Slip-Resistant Sole, Steel Mid Sole Antistatic. , Ppe: Protective Overalls With 100% Cotton 210 Gsm Or Fire-Retardant Fabric, Full-Sleeve, High-Visibility Reflective Tapes Per Is 15748 / En 20471. , Electrical Insulated Gloves Conforming To Is 4770 / Iec 60903, Suitable For Class 0 (1000 V Ac / 1500 V Dc) Electrical Protection, Made Of High-Dielectric Natural Rubber, Seamless, And Rolled Cuff Type. Each Glove Shall Undergo Routine Dielectric Test At 5 Kv For 1 Minute With No Puncture Or Flashover. The Gloves Shall Be Category Rc (Resistant To Acid, Oil, Ozone, And Low Temperature) And Provided With A Cotton Inner Liner And Storage Pouch. Supplied With Test Certificate Indicating Batch Number, Test Voltage, And Date. , Welding Face Shield Suitable For Full-Face Protection During Welding, Grinding, And Metal Fabrication Works With A Shield Size Of Approximately 9 X 12, Made Of Durable Polypropylene Providing High Impact, Heat, And Corrosion Resistance. The Face Shield Shall Include An Adjustable Ratchet-Type Headgear With Multiple Adjustment Positions To Ensure A Secure And Comfortable Fit For Prolonged Use. The Approximate Weight Shall Be 1.5 Kg Or Less, And The Product Shall Be Supplied As One Complete Unit. The Face Shield Should Conform To General Industrial Safety Standards Suitable For Use In Workshops. , Industrial-Grade Welding Gloves Suitable For Providing Protection, Comfort, And Dexterity During Welding, Cutting, And Metal Fabrication Operations, Made From Premium Split Leather (Cowhide Or Goatskin) With A Minimum Thickness Of 1.2 Mm, Offering High Resistance To Heat, Sparks, And Mechanical Abrasion. The Inner Lining Shall Be Made Of Soft Flame-Retardant Cotton Or Fleece, Providing Insulation Against Heat And Comfort For Prolonged Use. Each Glove Shall Have Reinforced Palm And Finger Patches For Added Durability And Better Grip While Handling Tools And Hot Metal Objects. The Gloves Should Be Stitched With Heat-Resistant Thread To Prevent Seam Failure During Exposure To High Temperatures. The Length Shall Not Be Less Than 14 Inches (350 Mm), Ensuring Full Hand And Wrist Protection, With Extended Cuffs To Safeguard The Lower Forearm Against Welding Spatter And Radiant Heat. The Gloves Should Be Conformed To En 388 (Mechanical Risks) And En 407 (Thermal Hazards) Or Equivalent Indian Standards (Is 6153). They Shall Be Suitable For Mig, Tig, Arc, And Gas Welding Operations. Should Be Heat And Flame-Resistant, Puncture And Tear-Resistant, And Designed For Repeated Use In Demanding Industrial Environments. The Pair Shall Be Supplied In Standard Size (Large/Universal Fit) And Shall Bear Proper Labeling Indicating Brand, Size, And Conformity To Relevant Standards. , Lifting And Hoisting , Heavy-Duty, Low-Profile Type Hydraulic Trolley Jack Suitable For Lifting Vehicles Or Machinery Up To A Rated Capacity Of 3 Tons. The Jack Shall Be Constructed From High-Grade Steel With Welded Frame For Superior Strength And Stability, A Lifting Range From Approximately 130 Mm To 465 Mm, Operated Through A Hydraulic Lifting Mechanism Actuated By A Detachable Pump Handle. Should Be Equipped With A Safety Overload Valve To Prevent Lifting Beyond Rated Capacity, And Precision Hydraulic Seals To Prevent Oil Leakage. The Unit Shall Feature A 360° Swivel Rear Caster And Wide Front Wheels For Easy Maneuverability. The Saddle Shall Be Grooved Or Rubber-Coated For Secure Load Contact. The Jack Shall Conform To Is 7620 / Asme-Pase Or Equivalent Standards, And Shall Be Finished With Corrosion-Resistant Powder Coating. Supplied Complete With Hydraulic Oil Filled And Ready For Use. , Industrial-Grade, Floor-Operated Type Hydraulic Trolley Jack Suitable For Lifting Heavy Vehicles, Machinery, Or Agricultural Equipment Up To A Maximum Capacity Of 5 Tons. The Construction Shall Be Of Robust, All-Steel Design With Reinforced Chassis And Welded Seams For Durability. It Shall Have A Lifting Range From Approximately 150 Mm To 500 Mm, Operated By A Long Detachable Handle Providing Sufficient Leverage For Smooth Lifting. The Hydraulic System Shall Incorporate A Safety Overload Bypass System, Precision Machined Piston And Pump For Consistent Performance, And A Reliable Lowering Control Valve For Controlled Descent. The Jack Shall Be Equipped With Steel Swivel Casters, Wide Stance For Stability, And A Saddle Plate With Anti-Slip Surface. The Surface Finish Shall Be Rust-Resistant Enamel Or Powder Coating. The Unit Shall Comply With Relevant Is/Ansi/Ce Safety Standards, Factory-Tested For Rated Load, And Supplied Ready For Workshop Service. , The Hydraulic Bottle Jack Of 10-Ton Rated Capacity, Suitable For Lifting Tractors, Vehicles, Or Heavy Structures. The Jack Body Shall Be Made Of High-Tensile Steel With Precision Machining For Durability And Stability. It Shall Have A Lifting Range From Approximately 200 Mm To 400 Mm, Incorporating A Screw Extension On The Ram For Height Adjustment. The Hydraulic System Shall Be Fitted With A Built-In Safety Overload Valve And High-Quality Seals To Prevent Leakage. The Operating Handle Shall Be Detachable And Designed For Easy Pumping Action. The Base Shall Be Wide And Stable To Ensure Safety During Lifting Operations. The Jack Shall Conform To Is 10672 / Asme B30.1 Or Equivalent Standards, And Finished With Corrosion-Resistant Paint. Supplied Fully Assembled, Tested, And Filled With Hydraulic Oil. , The Jack Stands Shall Be Of Heavy-Duty Ratchet Or Pin-Lock Type, Designed To Support Loads Up To 3 Tons Per Pair. Each Stand Shall Be Fabricated From High-Grade Steel With A Broad, Stable Base And A Ratcheting Support Column Providing Positive Load Engagement. The Height Adjustment Range Shall Be Approximately 290 Mm To 430 Mm, With Fine-Tooth Ratchet Mechanism Or Pin-Lock System Ensuring Secure Positioning. Each Stand Shall Include A Safety Locking Mechanism To Prevent Accidental Lowering Under Load. The Saddle Shall Have A Contoured Top For Stable Seating Under Vehicle Lifting Points. All Structural Components Shall Be Fully Welded And Finished With Corrosion-Resistant Powder Coating. The Stands Shall Meet Asme-Pase / Ansi Pald Or Equivalent Safety Standards. Supplied As A Matched Pair, Factory-Tested For Load Stability And Mechanical Integrity. , The Hydraulic Engine Hoist Shall Be A Foldable, Mobile Workshop Crane With A 2 Ton Rated Lifting Capacity, Suitable For Lifting, Removing, And Installing Vehicle Engines Or Heavy Assemblies. The Frame Shall Be Made Of High-Strength Steel Sections With A Reinforced Boom, Hydraulic Lifting Ram, And Heavy-Duty Castor Wheels For Mobility. The Boom Shall Have Adjustable Reach Positions (E.G., 500 Kg, 1000 Kg, 1500 Kg, 2000 Kg) With A Lifting Range Of Approximately 0 - 2300 Mm. The Hydraulic Ram Shall Be Operated Via A Detachable Handle And Equipped With A Safety Overload Valve To Prevent Overloading. The Hoist Shall Feature A Folding Design For Space-Saving Storage, And A 360° Swivel Hook With Safety Latch For Secure Load Handling. The Finish Shall Be Industrial Enamel Or Powder-Coated For Corrosion Protection. The Equipment Shall Comply With Is 7631 / Asme B30.20 / Ce Standards And Supplied Ready For Operation. , The Tractor Splitting Stand Shall Be Designed For Safe Splitting And Assembly Of Tractors During Clutch Or Transmission Repairs. The Unit Shall Consist Of Two Independent Rolling Stands, One Front And One Rear, Each With Adjustable Height And Wheel-Mounted Base To Facilitate Easy Alignment And Movement Of Tractor Halves. The Front Cradle Shall Support The Clutch Housing Or Engine Section, While The Rear Stand Supports The Transmission Or Rear Axle Section. Both Stands Shall Be Constructed From Heavy-Duty Fabricated Steel Sections With Mechanical Screw Or Hydraulic Lifting Arrangements Providing A Height Range Of 400 Mm - 800 Mm. The Stands Shall Be Fitted With Locking Pins, Adjustable Supports, And Safety Chains To Prevent Accidental Movement. Load Capacity Shall Be Minimum 2 Tons Per Pair. The Entire Unit Shall Be Powder-Coated For Durability And Conform To Workshop Safety Standards For Agricultural Machinery Maintenance. , The Transmission Jack Shall Be A Hydraulic Telescopic Type Suitable For Removing And Installing Vehicle Transmissions Or Gearboxes From Underneath The Lift. The Rated Load Capacity Shall Be 0.5 Ton, With A Lifting Range Of Approximately 1100 Mm To 1900 Mm. The Lifting Mechanism Shall Be Actuated By A Foot-Operated Hydraulic Pump For Hands-Free Operation. The Tilting Head Plate Shall Provide Front, Rear, And Side Adjustment Through Fine-Thread Screws To Aid Alignment During Installation. The Base Shall Be Wide And Equipped With Four Swivel Castor Wheels For Stability And Maneuverability. The Unit Shall Have A Safety Overload Valve, Heavy-Duty Hydraulic Seals, And A Controlled Lowering Valve. It Shall Conform To Asme Pase / En 1494 Standards And Be Supplied Fully Assembled And Oil-Filled. , The Chain Block Shall Be A Manual, Hand-Operated Lifting Device Of 2 Ton Rated Capacity, Suitable For Workshop And Field Lifting Applications. It Shall Have A Mechanical Gear System Enclosed In A Steel Casing, Operating A Load Chain Made Of Grade 80 Alloy Steel With High Tensile Strength. The Standard Lift Height Shall Be 3 M - 6 M, With An Option For Extended Lift Lengths. The Mechanism Shall Incorporate A Load Brake With Dual Pawls For Positive Load Holding And Safety Hooks With Safety Latches At Both Ends. The Hand Chain Shall Run Smoothly On Precision-Machined Sprockets. The Unit Shall Conform To Is 3832 / Asme B30.16 / En 13157, With Load Testing Certificates And Corrosion-Resistant Paint Finish.

BRR:9679012 Bids Are invited for Knuckle Assy - Knuckle Assy For Xenon Amb , Hub Assy - Hub Assy For Xenon Amb , Fly Wheel Bearing - Fly Wheel Bearing For Xenon Amb , Snap Ring - Snap Ring For Xenon Amb , Shock Absorber Rh - Shock Absorber Rh For Scorpio , Brake Cable - Brake Cable For Re , Chain Sprocket - Chain Sprocket For Re , Brake Shoe Rear - Brake Shoe Rear For Re , Brake Shoe Front - Brake Shoe Front For Re , Clutch Cable - Clutch Cable For Re , Front Wheel Bearing - Front Wheel Bearing For Re Total Quantity : 28

BRR:9678937 Bids Are invited for Clutch Master Cyl Assy - Chain And Sprocket Kit , Sleeve Cyl Assy - Cyl Head Gasket , Sleeve Cyl Rep Kit - Hose Pipe , Clutch Cyl Rep Kit - Field Coil , Spider Brg - Pole Screw , Shaft Seal - Clutch Plate , Axle Needle Brg - Clutch Plate Assy , Axle Oil Seal - Cover Assy , Wheel Cyl Assy Kit 38 No - Rep Kit Brake , Wheel Cyl Assy 38 No - Brake Pad Frt , Pilot Brg - Brake Pad Rr Total Quantity : 62

BRR:9699875 Tender For Biennial Maintenance Contract Of Ahp Mech Maintenance Btps-1 MANDATORY JOB AMC AHPMM 1.01 WAGES: Lobour cost without PPE (Please enter Basic Rate in Rs.725981.84 for this item.) 1.02 PPE-Liveries, Consumables, Tools&Tackles and Profit & Overhead 1.03 WC & GPA INSURANCE 1.04 ODD HOURS DUTY 2 OPTIONAL JOB AMC AHPMM 2.01 OPTIONAL JOB PART-I Replacement of the Ash Slurry Pipe Line at critical position insidefoutside Plant including SoilfAsh excavation, Jungle Cutting, Dewatering, Conveniance, Diesel Generator(where electricity is not available etc.) 2.02 OPTIONAL JOB PART-II Ash Pond Change over(Ash Pond-1to2 or Ash Pond-2 to1) including Convenience, tool tackles etc.

BRR:9699872 Different Types Of Job To Be Done During Upcoming Overhauling At Ahp Mm Area Of U5 215 Mw Btps

BRR:9695291 Bids Are invited for Bare Shaft Twin Lobe Blower Model Rl 110 Ac Of Swam Make Without Accessories And Motor For Ahs - As Specified In The Item Specification Document , Accessories For Twin Lobe Blower Model Rl 110Ac Of Swam Make For Ahs Btpp - As Specified In The Item Specification Document , Floated Bearing - As Specified In The Item Specification Document , Drain Plug - As Specified In The Item Specification Document , Filling Plug - As Specified In The Item Specification Document , Oil Level Indicator Assembly - As Specified In The Item Specification Document , Oil Seal - As Specified In The Item Specification Document , Antivibration Mountings Pads For Rl 110 Blower Part No 1058 - As Specified In The Item Specification Document , Distance Ring Nde - As Specified In The Item Specification Document , Suction Filter For For Swam Make Blowers Of Model Rl 110 Ac - As Specified In The Item Specification Document Total Quantity : 108

BRR:9692173 Bids Are invited for Title 470501009778 - V Belt Spc 2000 Poly F Plus Make Fenner For Clarifier Sludge Pump , Title 470501009777 - V Belt Spb 3000 Poly F Plus For Vent Fan Silo In Ahp Of 600Mw Rtps Dvc , Title 470501009775 - V Belt Spb 2700 Poly F Plus For Bottom Ash Over Flow Transfer Pump In Ahp Of 600Mw Rtps Dvc , Title 470501009763 - V Belts Spc 4250 For Recovery Pumps And Ash Slurry Pumps , Title 470501009774 - V Belt Spc 4650 Poly F Plus Make Fenner For Slurry Pump In Ahp Of 600 Mw Rtps Dvc , Title 470501009770 - V Belt Spa 1700 Poly F Plus For Slurry Pump Area Drain Pump In Ahp Of 600Mw Rtps Dvc , Title 470501009769 - V Belt Spb 1700 Poly F Plus For Vacuum Pump Area Drain Pump In Ahp Of 600Mw Rtps Dvc , Title 270240019992 - V Belt Spc 2240 , Title 150803031019 - Connecting Hose Pipe Oil Service Dia 1 1By2inchbsp Length 3 M For Fluid Coupling Model 500 Pst Make Petl , Title 360200000000 - Rubber Hose For Pulse Jetting System , Title 470501009767 - V Belt Spb 1700 Poly F Plus For Vacuum Pump In Ahp Of 600Mw Rtps Dvc , Title 470520010001 - V Belt Spz 1077 , Title 270240019991 - V Belt Spc 4500 , Title 470501009786 - V Belt B1820by B 70 Poly F Plus Make Fenner For Degasser Blower , Title 400511111134 - Oil Seal Neoprene Typesize 22 Mm X 35 Mm X 7 Mm , Title 400511129881 - Oil Seal C Size 75 X 100 X 12 Mm Thk Total Quantity : 462

BRR:9688664 Tender for Insurance Of Fazi Hydel Power Project,Wbsedcl Under Mini Micro Hydel Division, Kurseong.

BRR:9688373 Limited Re-Tender Notice For Insurance Of Sidrapong Hydel Power Project Of Wbsedcl; 2 COVERAGES 3 EARTH QUAKE 4 TERRORISM 5 MACHINERY BREAK DOWN

BRR:9686597 Tender for Nctps-Ii - M-Ii Circle - Ahp Dn - Fahs - Unit-Ii- Pdfac System Supply, Erection, Dismantling Of Deteriorated/Corroded 200 Nb Pipe In Pipe Of Conveying Line From Esp D Pump To Intermediate Silo And Erection Of New 200 Nb Pipe In Pipe In The Plc Operated Pdfac System Including Cost Of Leading & Lifting, Transportation & Hire Charges To Drawn And Devolution In Store