BRR:7499217 Bids Are Invited For High Speed Pmsm Tacho Generator , Function Generator Digital Tachometer Total Quantity : 3

BRR:7494161 Bids Are Invited For W96414400025 Stroboscope , Light Emitting Diode Driver Total Quantity : 16

BRR:7494002 Bids Are Invited For Vibration Meter , Ph Meter Total Quantity : 1

BRR:7493132 Tender For For The Supply Of Veterinary Instrument, Equipments & Others Item From Manufactures, Stokist And Authorized Distributors-- 1 A.I guns French mini with container (As per specifications) (Sample) 2 A.I Kit(As per specifications) (Sample) 3 A.I sheaths French Mini (As per specifications) (Sample) 4 A.I.Crate Cum Travis (As per specifications)(Sample) 5 Disposable A.I Gloves (As per specifications)(Sample) 6 Straw Cutter round Plastic body(As per specification) (Sample) 7 P.V.C. Goblets made of Virgin Plastic Round Size 35mm X118mm (Sample) 8 P.V.C. Goblets made of Virgin Plastic Round Size 65mm X118mm (Sample) 9 Rubber Gum BootSize 9 No(Sample) 10 Rubber Gum BootSize 10 No (Sample) 11 Nitrile Examination Gloves Medium(Sample) 12 Nitrile Examination Gloves Large(Sample) 13 Disposable Latex surgical gloves no. 6.5sterilized ISI Marked(Sample) 14 Disposable Latex surgical gloves no. 7.5 sterilized ISI Marked(Sample) 15 Allies Tissue forcepssize 8 (Sample) 16 Long Forceps size 20 (Sample) 17 Long Curved Throat Forceps(Sample) 18 Dressing Forceps Straight30cms (Sample) 19 Dressing Scissors Curved 8 (Sample) 20 Dressing Scissors Straight 8 (Sample) 21 Artery Forceps Straight 8 (Sample) 22 Artery Forceps Curved 8 (Sample) 23 Clipper scissors size 20 cm curved (Sample) 24 Mayo Scissors Straight 7.5 (Sample) 25 Mayo Scissors Curved7.5 (Sample) 26 Suture cutting forcepssize 6(Sample) 27 Suturing needle straight traumatic and afraumatic size No. 1 (pkt of six) (Sample) 28 Suturing Straightcurved traumatic andafraumatic size No.5 (pkt of six) (Sample) 29 B.P Blades sterilized with ISI mark (pkt of 100 blades) size 15 (Sample) 30 B.P Blades sterilized with ISI mark(pkt of 100 blades) size 24 (Sample) 31 B.P handle size 4 (Sample) 32 B.P handle size 3 (Sample) 33 Disposable needle 16 Gauge 1.5 (Sample) 34 Disposable needle 18 Guage 1.5 (Sample) 35 Disposable needle 20 Guage 1.5 (Sample) 36 Disposable2 ML Syringe With Needle (As per specification) (Sample) 37 Disposable 5ml Syringe With needle (As per specification) (Sample) 38 Disposable10 ml SyringeWith needle (As per specification) (Sample) 39 Disposable 20 ML Syringe With Needle 40 Disposable syringe without needle 2 ml (As per specification) (Sample) 41 Disposable syringe without needle 5 ml (As per specification) (Sample) 42 Disposable syringe without needle 10 ml (As per specification) (Sample) 43 Disposable syringe without needle 20 ml (As per specification) (Sample) 44 Disposable syringe without needle 50 ml (As per specification) (Sample) 45 5 ml Disposable syringes with needle 21” (As per specification) (Sample) 46 Automatic breaking single use vaccination syringe 2 ml 16G, 3/4 Inches needle (Sample) 47 Automatic breaking single use vaccination syringe 5 ml 18G, 3/4 Inches needle (Sample) 48 Disposable I.V set sterilized, non-pyrogenic, with double filter and needle 16 1/2 guage (Sample) 49 Operation Table for large animals (Hydraulic) (As per specification) (Catalouge) 50 Operation Table Hydraulic for small animal with Remote(As per specification)(Catalouge) 51 Working Table for Hospital and Labs(As per specification) (Sample) 52 Examination Table(As per specification) (Sample) 53 Veterinary Surgical equipment kit (for Largeanimals) (As per specification) (Sample) 54 Veterinary Surgical equipment kit (for Small animals(As per specification) (Sample) 55 Vaccination Kit (as per specifications) (Sample) 56 Polyglact in 910 with Igracare Coating 3-0 Round body 57 Polyglact in 910 with Igracare Coating 1-0 reverse cutting 58 Absorbent Pad (size 20x8 cm) sample 59 Absorbent Pad (Size 12x12cm) Sample 60 Chromic 1 , RB (AS per specification) (Sample) 61 BB Silk 2-0 RB(AS per specification) (Sample) 62 Surgical Tray SS with cover12x10 (Sample) 63 Instrument Sterilizer (As per specification) (Sample) 64 Autoclave 10 Lit. withDressing Drum Bin SS (AS per speification) (Sample) 65 Face Mask(Pkt of 100 Nos.) (As per Specification) (Sample) 66 Bouffant CapsIndividually 50Caps/ Pack (Sample) 67 Hoof cutterdouble action (Sample) 68 Instrument Cabinet (As per specification) (Sample) 69 Instrument Trolley (As per specification) (Sample) 70 Hoof Trimming Set(As per specification) (Sample) 71 Docking Machine for Large animals, chrome plated (Sample) 72 Bowls stainless steel size 20 cms (Sample) 73 Small range Vaccine CarrierPortable 1.6 to 2.0 Lit. (As per specification) (Sample & Catalogue) 74 Medium range Vaccine Carrier 8 Lit. (As per specification) (Sample & Catalogue) 75 Long range Vaccine Carrier20 Lit. (As per specification) (Sample & Catalogue) 76 Vaginal Speculum for small animals size 6 (Sample) 77 Vaginal Speculum for large animals size 14 (Sample) 78 Trocar and Cannula for large animals with metal handle SS(Sample) 79 I.V. Catheter (As per specification)(Sample)(Sample & Catalogue) 80 Teat surgery set complete (As per specifications)(Sample) 81 Dystokia Set (as per specification)(Sample) 82 Stethoscope(As per specification)(Sample) 83 Infra Red Thermometer(As Per Specification)(Sample) 84 PPE Kit Small Size (Personal protective equipment) (As Per Specification)(Sample) 85 PPE Kit Large Size (Personal protective equipment) (As Per Specification)(Sample) 86 Ultrasound Machine (As per specification)(Catalogue) 87 Veterinary Digital thermometer (As per specification) (Sample) 88 Natural Abosorable Virtual Monofilament non needle chromic Gut 1-0 & 152 cm (Sample) 89 Skin Stapler with 35 stapplinng pin of stainless steel (Sample) 90 30 kw high frequency x-ray machine (as per specification) 91 X-RAY Machine 600mA (As per specification)( Catalogue) 92 100 mA HIGH FREQUENCY MOBILE X-RAY MACHINE 93 Digital Radiography Machine (Catalouge) As per Specification) 94 Air Curtain(As Per Specification) (catalouge & Sample) 95 Surgical Mask (As per specification) (sample) 96 GlovesSize 8 (As Per Specification)(Sample) 97 GlovesSize 6 (As Per Specification)(Sample) 98 Parafin Bath (As per Specification)(Catalouge) 99 Water Bath (As per Specification)(Catalouge) 100 Automatic Macro block PC Compatible Digestion System for Nitrogen / Protin estimation for 12 sample (As per Specification)(Catalouge) 101 Automatic Scrubber System (As per Specification)(Catalouge) 102 Glass Slide, Fine smooth edges, Clean(Sample) 103 Sterile cotton swab in tube(Sample) 104 Serum collection vial 2 ml, inner screw cap, leak proof graduated, writable external surface(Sample) 105 Cryo Vial, Sterile, Graduated,Polypropyline, 2/1.8ml capacity(Sample) 106 Vaccuitainer Plain 10 ml with clot activator , with 20 Gauze needle and Holder(Sample) 107 Immunoplate96 well,Maxisorp,(Sample) 108 Automated Identification and Antibiotic Susceptibility System (As per specification) (Catalouge) 109 12 Channel Stepper Electronic micro pipete 100-120 µl (As per specification) (Catalouge) 110 12 Channelmicro pipete 05-50 µl (As per specification) (Catalouge) 111 Single Channel Micropipette Variable Volume (100-100 µl) (As per specification) (Catalouge) 112 Single Channel Micropipette Variable Volume (0.2-2 µl) (As per specification) (Catalouge) 113 All Quartz Single Distillation water plant Vertical (As per Specification) 114 All Quartz Double Distillation water plant Vertical (As per Specification) 115 ELISA plate Reader (As per Specification) 116 Elisa Plate washer (As per Specification) 117 Fluorescence And Bright Field Tronocular Microscope(Catalouge) As per Specification 118 Debeaker Machine (As per specifications) (Sample) 119 Electric Debeaker Blade (As per specifications) (Sample) 120 Bird Transportation Cages (As per specifications) (Sample) 121 Automatic Vaccinator (As per specifications) (Sample) 122 Chick guard (As per specifications) (Sample) 123 Flame Gun (As per specifications) (Sample) 124 Flame Gun(Baby) (As per specifications) (Sample) 125 Pressure washer cleaner (As per specifications) (Sample) 126 Electric brooder (As per specifications) (Sample) 127 Gas Brooder (As per specifications) (Sample) 128 Chick Drinker (As per specifications) (Sample) 129 Chick feeder(As per specifications) (Sample) 130 Grower feeder (Jumbo Feeder)(As per specifications) (Sample) 131 Jumbo drinker (As per specifications) (Sample) 132 Grower drinker (As per specifications) (Sample) 133 Fogger(As per specifications) (Sample) 134 Parent feeder (male/female) (As per specifications) (Sample) 135 Chick feeder tray (As per specifications) (Sample) 136 Chick transportation Cages(As per specifications) (Sample) 137 Hanging Balance (Salter) (As per specifications) (Sample) 138 Air circulation fan(As per specifications) (Sample) 139 Exhaust Fan (As per specifications) (Sample) 140 Egg Candling Portable Type (As per specifications) (Sample) 141 Spray Machine (As per specifications) (Sample) 142 Thermometers (As per specifications) (Sample) 143 Bell drinker (As per specifications) (Sample) 144 Hanging Scale (As per specifications) (Sample) 145 Dry and Wet Thermometer(As per specifications) (Sample) 146 Portable digital weighing scale (50kg, 88 LBS) (As per specifications) (Sample) 147 Digital Weighing Machine 300Kg (As per specifications) (Sample) 148 Digital Weighing Machine 500Kg(As per specifications) (Sample) 149 Repromatic chain feeding system- layer shed (As per specifications) (Sample) 150 Augerment feeding system with winching system - brooder shed (As per specifications) (Sample) 151 Automatic nipple with drip cup for drinking -Layer shed(As per specifications) (Sample) 152 Automatic nipple with drip cup for drinking -Brooder shed (As per specifications) (Sample) 153 Semi-automatic feed mill capacity 2 tonn/hr (As per specifications) (Sample) 154 Farm Equipments (lump sum) (As per specifications) (Sample) 155 Generator Set 63 KV (Specification) (As per specifications) (Sample) 156 Generator 45 kv (As per specifications) (Sample) 157 Silo & other equipments for Layer shed (As per specifications) (Sample) 158 Silo & other equipments for Brooder shed (As per specifications) (Sample) 159 Semi automatic feed mill capacity 2 ton/hr (As per specifications) (Sample) 160 Farm Equipments (lump sum) (As per specifications) (Sample)

BRR:7487194 Bids Are Invited For Bp Appratus Mercury,Stethoscope,Measuring Scale,Weight Machine,Aprons,Aprons Paramedical,Pulse Oxim Total Quantity : 136

BRR:7486009 Tender For Purchase Of Medical Equipment - Laying And Jointing Pvc Pipe. Heading , Glucometer Along With Strips, Cotton Swabs & Sharp Container , Bmw Bins , Stethoscope , Thermometer , Weighing Machine (Adult) , Weighing Machine (Infant) , Muac Tape , Digital Bp Apparatus , Fetal Doppler , Pulse Oxymeter , Nebulizer , Ambu Bag , Artery Forceps , Kidney Tray

BRR:7482513 Bids Are Invited For Acoustic Stethoscope (V2) (Q2) Total Quantity : 226

BRR:7481721 Bids Are Invited For Boq 2 Item 1 , Item 2 , Item 3 , Item 4 , Item 5 , Acoustic Stethoscope (V2) Total Quantity : 8

BRR:7481627 Bids Are Invited For 1 Pneumabort K Vaccine 60 2 Paper Tape 1 inch 1 3 Stethoscope 2 4 Digital Thermometer 10 5 HDPE 50ml Sample Container 50 Total Quantity : 123

BRR:7498515 Bids Are Invited For Alignment Bar To Drg. No 8021610085 , Wheel Alignment Equipment Total Quantity : 2

BRR:7477627 Bids Are Invited For Mt 40 Repair Of Radiator Assy , Injector Assy Repair , Rear Door Repair And New Beading Fitting , Crank Shaft Grinding , Ac Gas Refilling And Service Charge , Wheel Alignment Repair Of Radiator Assy, Injector Assy Repair, Rear , Heavy Vehicle Driving Simulator (Mha) Total Quantity : 9

BRR:7500186 Bids Are Invited For Coil Type Adjustable Induction Heater , Coil Tubular Heater Induction Heater Total Quantity : 1

BRR:7482843 Bids Are Invited For Bearing Induction Heater (Q3) Total Quantity : 1

BRR:7477773 Bids Are Invited For 1000070252_ Portable Induction Heater For Ers , Portable Single Operated Rectifier Type Dc Arc Welding Total Quantity : 1

BRR:7500237 Bids Are Invited For Procurement Of Hp Air Compressor Spares Valve 3 4 Bsp Or Obs Del Ul Valve 3By4 Inch Bsp , Gasket Valve Flat To 50 Head , Gasket Flyendts 10 , Auto Drain Valve , O Ring Ss 15Ts Or O Ring Ss 15 Ts12 15 , Ring O 10X2 Duv , V Belt Or Belt C98 , Drain Valve Or Drainage Valve 037680 , Flexible Gear Rim For Coupling Or Flexible Coupling Element , Pressure Guage , Flexible Gear Rim E Coupling Or Flexible Coupling Element , O Ring Ist Stage Or Reed Valve , Cylinder Foot Packing Or Gasket Cylinder Foot Packing , Drive Belt Or V Belt , Pressure Switch , Solenoid Valve Or Drainage Valve 037680 , N-Ring Or Nose Ring , Oil Scraper Ring Or Slotted Oil Control Ring , Lamellar Valve Or Reed Valve , Rectangular Ring Or , G-Ring Or Double Beveled Oil Control Ring , Non Return Valve , Air Filter , Filxible Gear Rim Or Flexible Coupling Element , Cylinder Foot Packing 1St Stage Or Gasket Cylinder Foot Gasket , Cylinder Foot Packing 2St Stage Or Gasket Cylinder Foot Gasket Nrv Assy 11-2 Bsp, Connecting Rod & Crankshaft Aasy, Obs Gasket Hp20, Piston Assy 100 Ss-T, Obs Piston Rings Dia 100, Obs Piston Ring Dia 60, Piston Assy Dia60 Ts, Flat Valve Dia 60 Cyl Hp07-10, Ind Oil Level 1 1-4 Bsp, Valve Finger Type Dia60 Cyl, Gasket Big Cyl To Dn Dia 1, V Belt C-85, Pressure Transmiter (0-50 Bar), A-C Assy Sp10-12-15-20, I-C Pipe 1 St Sp 10-12-15-20, I-C Pipe 2 St Sp 10-12-15-20, Piston & Gp Dia 127 P, Cyl Dia50, Sp M-C Sp Series, Duv Assy 3-4 Bsp, Bearing, Souv Assy 220V G114 No 312, Sv Assy 3-8 Bsp, Total Quantity : 208

BRR:7499396 Bids Are Invited For Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 1 Removal of insulation along with mineral wool, wire mesh, binding wires and cladding sheet on sodium pipelines; As per tender document , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 2 Refixing of insulation along with mineral wool screws and cladding sheet on sodium pipelines, wire mesh, binding wires, fixing; As per te.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 3 Re-fixing of insulation along with supply of mineral wool, wire mesh, binding wires, fixing screws and Aluminium cladding sheet on sodium.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 4 Re-fixing of insulation along with supply of mineral wool, wire mesh, binding wires, fixing screws and SS cladding sheet on sodium pipeli.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 5 Deficiency attending of different sizes of Wire type leak detectors on pipelines and tanks including removal and re-fixing of FTB s; As p.. , Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) - As per tender document; Sl No 6 Installation & removal of scaffolding including supply; As per tender document Total Quantity :

BRR:7497461 Bids Are Invited For Gloves Provision Of Medicines Medical Kits , Movement And Administration Of Veterinary Team On Site Arrangements , Thermometer , Gloves , Banner And Other Advertising Charges Provision Of Medicines & Medical Kits, Movement And , Disposable Surgical Rubber Gloves (V2) Infrared Medical Thermometer For Measuring Body Total Quantity : 128

BRR:7497457 Bids Are Invited For Pressure Pipe , Transfer Case Oil Seal , Gear Box Oil Seal , Tie Rod End , Accelerator Cable , Field Coil Assy , Self Starter Bush , Rear Door Lock Assy , Blower With Motor , Injector Nozzle , Toggle Switch Pressure Pipe , Transfer Case Oil Seal, Gear Box Oil Seal, Tie Rod End , Accelerator Cable , Field Coil , Asbestos Cement Pressure Pipe And Joints (V2) As Per Is 1592 Total Quantity : 18

BRR:7497399 Bids Are Invited For Cyl Head Assy Complete , Oil Cap , Electronic Avr , Lubrication Pressure Switch , Lub Oil Filter Element , Portable Power Generators Total Quantity : 25

BRR:7494187 Bids Are Invited For Load Cell For 2400 Mm Conveyor Drive Head , Load Cell For 2000 Mm Conveyor Drive Head , Belt Tension Meter (Microprocessor) - Range 0 To 1000 Kn , Conveyor Roller Total Quantity : 16

BRR:7494014 Bids Are Invited For Procurement Of Ultrasonic Leak Detector Total Quantity : 1

BRR:7493587 Bids Are Invited For Gov Spares Of Rotork Make Actuator Fluido Impianti Firenze Gr Rtr 002 , Solenoid Switch Rgs Oswalltdwistle Ep000 D Tb Bas02 Atex2145 , Solenoid Switch Rgs Oswalltdwistle Ep000_D_Tb Bas02 Atex2145 , Differential Pressure Switch Delta Controls , Open Close Indication Soldo Controls , Motorized Actuator (V2) Total Quantity : 6

BRR:7493279 Bids Are Invited For Power House Of Chamera Power Station 1 Mse Card For Annunciation Panel , 22 Pin Jack For Annunciation Card , Pressure Switch Male Thread With Single Element 10A 415V Ac 1A 250V Dc 1Noplus1nc. , Pressure Switch Female Thread With Single Element 10A 415V Ac 1A 250V Dc 1Noplus1nc. , Flow Switch Outer Dia. 34Mm At Thread Spdt 1A 220V Dc 130-300Lpm For Pressure Upto 10 Bar , One Side 1By2inch Bsp One Side 3By8inch Flare Elbow Brass , One Side 1By8inch Bsp One Side 1By4inch Flare Elbow Brass , Clapper Screw For Piston Of Deluge Valve , Centre Plate Screw For Deluge Valve , Kit For Deluge Valve 100Nb Wet Pilot Type , Kit For Deluge Valve 100 Nb Dry Pilot Type , Actuator Assembly Wet Pilot Type 100 Nb , Actuator Assembly Dry Pilot Type , Detector Air Control Dry Pilot Type Deluge Valve Regulator Left Hand , Charging Valve For Deluge Valve , Ss Stem With Ss Piston And O-Ring For 100Nb Deluge Valve Pressure Switch (Male Thread) With Single Element 10A 415V , Swing Check Type Reflux Valves For Water Works Purposes (Single Door Pattern) (V2) As Per Is 5312 (Part1) Total Quantity : 105

BRR:7492127 Bids Are Invited For Proc Of Mt Spares 352 Dia Clutch Disc Assy , Cover Assy 1.75 Spline Dia , Assy Clutch Pressure Plate 330 Dia , Assy Release Bearing , Assy Combination Switch , Repair Kit Frt Spring Brake Actuator , Oil Seal , Fuel Shut Off Solenoid , Disc Clutch , Cover Assy Clutch , Suspension Bush Kit 352 Dia Clutch Disc Assy Spline, Cover Assy, Assy Clutch Pressure Plate, Assy Release Brg, Assy Combination Switch, , Pressure Plate Total Quantity : 13

BRR:7492021 Bids Are Invited For Mt004 Kit Shoe , Clutch Master Cyl , Regulatorsr , Injector , Air Filter , Spark Plug , Wiper Motor Assy , Coil Assy Ignation , Damper Assy , Combination Switch , Pressure Plate , Clutch Release Brg , Clutch Plate , T Map Sensor , Discharge Hose , Condenssor Assy , Compressior Clutch , Carburator Hose , Shout Cover Kit Shoe, Clutch Master Cyl, Regulatorsr40, Injector, Air Filter, Spark Plug, Wiper Motor Assy, Coil Assy Ignation, Damper Assy, Combination , Pressure Plate Total Quantity : 40

BRR:7491885 Bids Are Invited For Circuit Breaker Knob , Circuit Breaker , Pressure Gauge Plug , Oil Seal , Assy Flywheel , Cross , Assy Cable Set , Drying Distri Unit Hi Pr Voss , Bolt U , Tank Coolant Vehicular , Mounting Pad Rear , Assy Timing Belt Tensioner Complete , Knob Gear Shift Lever , Tie Rod End Rh , Tie Rod End Lh , Assy Clutch Cisak 330 Dia , Assy Clutch Pressure Plate 330 Dia , Assy Clutch Release Bearing With Sleeve , Needle Roller Bearing , Assy U J Steering , Pinion Starter , Assy Universal Joint , Clutch Master Power Unit , Speed Sensor Agb Knob, Circuit Breaker (Battery Cut Off Switch), Pressure Gauge Plug, Oil Seal, Assy Flywheel, Cross, Assy Cable Set (Cab Lamp), Drying & Distri Unit Hi Pr Voss, Bolt U, Tank Coolant Vehicular, Mounting Pad Rear, Assy Timing Belt Tensioner , Fabricated Special Purpose Vehicle On Truck/Van Total Quantity : 40

BRR:7490130 Procurement Of Spares For Rexorth Hydraulic Power Pack Of Stacker Reclaimer And Plough Feeder Of Chp 210 Mw Atps, Mppgcl, Chachai , Float S / W: Ripa50-09 / L=500 L1=400 Al2=80 A Sdn-102 Pls See Detail As Per Technical Schedule , Check Valve S10 A 1.0 Pls See Detail As Per Technical Schedule , 9 / Counter Balance Vlv : - Cbca-Lin-Ecv Make : Sun Pls See Detail As Per Technical Schedule , Dbl, Pilot Check Valve : Z2s6-1-6X Pls See Detail As Per Technical Schedule , Z / Hose Break Valve : Rbe R 1 / 4 - X-25Pls See Detail As Per Technical Schedule , 9 / Housing Pls See Detail As Per Technical Schedule , Pressure Relief Valve : Dbds10k 1X / 315Pls See Detail As Per Technical Schedule , Pilot Op. Check Valve : Sl 10 Pls See Detail As Per Technical Schedule , Minimess Hose : Ab20pls See Detail As Per Technical Schedule , Return Line Filter ( Ripa 2-15-330 ) Pls See Detail As Per Technical Schedule , Return Line Filter ( Ripa 2-15-060 ) Pls See Detail As Per Technical Schedule , Butterfly Valve Ripa 40-06 / 65 Mm Ibf2js Limit Switchpls See Detail As Per Technical Schedule , Flexible Pipe Conn : Ripa60 18 / 065 Pls See Detail As Per Technical Schedule , Cartridge Check Valve : Size 20Pls See Detail As Per Technical Schedule , Cartridge Check Valve : Size 10 Pls See Detail As Per Technical Schedule , Float S / W With Thermo Well : Ripa 50-11 / Rt-101Pls See Detail As Per Technical Schedule , Temp S / W With Thermo Well : Ripa 50-11 / Rt-101Pls See Detail As Per Technical Schedule , Wheel Valve Ripa 40-05Pls See Detail As Per Technical Schedule , Filter Element 0160-Rpls See Detail As Per Technical Schedule , Pressure Switch Hed-8 Oa1x / 200Z14-7N003pls See Detail As Per Technical Schedule , Unloading Relief Valve Db-10 Pls See Detail As Per Technical Schedule , Directional Control Valve 4Wepls See Detail As Per Technical Schedule , Throttle Valve Z2fs10 Pls See Detail As Per Technical Schedule , Pressure Reducing Valve Zdr6pls See Detail As Per Technical Schedule , Directionnel Control Valve 410-Ipls See Detail As Per Technical Schedule , Pilot Operated Check Valve Z256pls See Detail As Per Technical Schedule , Flow Control Valve Zfrm6 Pls See Detail As Per Technical Schedule , Unloading Relief Valve Db10 Pls See Detail As Per Technical Schedule , Double Throttle Check Valve Z2fs Pls See Detail As Per Technical Schedule , Cartridge Check Valve M-Sr10pls See Detail As Per Technical Schedule

BRR:7487673 Bids Are Invited For Gps Based Speed Measurement Device , Satellite Navigation System Based Time Sync Ntp Server Total Quantity : 1

BRR:7487483 Bids Are Invited For Mt Spares Pressure Plate , Field Coil , Fuel Cut Off Switch , 4St Relay , Ignition Switch , Combination Switch , Pressure Plate Total Quantity : 16

BRR:7487233 Bids Are Invited For Mt Grant Gasket Valve Cover , Assy Nozzle Holder , Nozzle , Switch Pressure , Weather Strip Sliding , Protective Bag , Hose Fmo 16X1200 Dkl Dkl M27x2 , Brake Shoe Linner Gasket Valve Cover, Assy Nozzle Holder, Nozzle, , Spiral Wound Metallic Gasket Total Quantity : 48

BRR:7487098 Bids Are Invited For Water Saprator Sensor X-7413400 , F-0232610 , P-3600651 , P 1305642 , L01402000035 , 2752-2520-0106 , 2573-4620-0108 , 2510- 2930-0102 Water Saprator Sensor, Rear Brake Shoe Plate, Pressure , Occupancy Sensor Total Quantity : 18

BRR:7487039 Bids Are Invited For Mt02 Alternator Alternator , Clutch Master Booster , Water Pump , Horn , Injector , Gear Lever Rep Kit , Clutch Release Brg , Rear Back Shoe , Steering Knuckle Kit , Sensor Throttle Body , Wheel Cyl Lh , Sensor Map , Water Pump Sensor , Oil Seal , Temp Sensor , Speedometer Drive , Wheel Cyl Assy , Silencer Circlip , Clutch Cable , Hose Carburator , Bush Carburator Alternator, Clutch Master Booster, Water Pump, Horn, Injector, Gear Lever Rep Kit, Clutch Release Brg, Rear Back Shoe, Steering Knuckle Kit, Sensor , Pressure Plate Total Quantity : 46

BRR:7486613 Supply Of Spares Parts Required For M And M Touristor Excello Mini Bus Vehicles Of Panjrapur Garage Under Executive Engineer Transport Wssd Supply Of Spares Parts Required For M And M Touristor Excello Mini Bus Vehicles Of Panjrapur Garage Under Executive Engineer (Transport) Wssd. , Fuel Pipe Line Full Set , Common Rail Assly , Spring Leaf Frt Lh & Rh , Spring Leafrear Lh & Rh , Shackle Kit With Bush , Shock Absorbr Front , Shock Absorbr Rear , Gear Top Cover Assly , Steering Pump , Steering Box Assly , Accelarator Padel Sensor Assly , Flasher 12V Interface , Radiator , U.J. Cross Bearing , Co-Driver Seat , Flywheel , Tie Rod End Assly , Tie Rod End Rh , Clutch Cover Assembly Dia 240 Mm , Clutch Disc Assembly Dia 240 Mm , Clutch Slave Cylinder (Dia 23.81 Mm) , Iso Micro Relay 12V , Belt 5Pk-1165 , Turbo Charger Assly , Element Oil Filter , Gasket Water Pump , Pump Assembly Water 4 Pk-Mdi Tc Cd , Cooling Fan-Modulating Assy , Element Fuel Filt , Belt 4Pk 1050 Mdi T C Cd , Diesel Filter , Mirror Assy Outside Lh , Mirror Assy Outside Rh , Stub Axle Rh , Bearing Kit Centre , Hub Brg Inner , Rear Axle Assy , Brake Line Shoe Assy Fr , Kit Lining Set Std Fr , Air Filter Assy. , Door Lock Driver , Brake Drum Front , Brake Drum Rear , Wheel Nut , Clutch Release Bearing Assy. , Door Hinges , Cable Shift Gear Box , Cable Select Gear Box , Door Lock Inner , Gasket Rocker Arm Cover , Belt Power Steering 735 , Assy Cylinder Head , Injector Mdi Cr , Turbocharger , Kit Gasket , Gasket Oil Pan , Piston Kit Assy , Boost Pressure Sensor , Rear Axle U Bolt , Nut Hex M16*1.5 , Bolt Hub Rear , Final Drive Assy 6.143 Ratio , Servo And Master Cylinder Assy , Clutch Hose Slave Cylinder , Spring Washer M12 , Stg Wheel Assy With Horn , Hose Vac-Vac Tank To Vac Servo Tube , Bush Spring , Washer Brake Drum , Bearing Outer , Cup Bearing Rear Wheel Inner , Bearing Assy , Bolt Fix Rear Shaft Axle , Hose Vaccum , Seal Grease Hub , Bolt Clip Spring Fr , Rr Spring Bkt Rr Rh , Rr Spring Bkt Rr Lh , Bush Rubber Shock Abs , Bush Pin Kit , Assy Propeller Shaft T25 Mdi , Bush , Bush Front , Bush Rear , Kingpin Repairable Kit 25 Lcv , Iso Micro Relay 12V Oen , Kit Five Locks , Jk Door Hinge With Handle , Bulb 12V 21 W , Hose Vaccum-(Nrvto Tube) , Arm Knuckle Strg Rh , Driver Grabh Handle Excelo All Pcoated

BRR:7481894 Bids Are Invited For Boq Boq Hydreleaf Valve , Pressure Sensor , Pre Fuel Filter Assy , Proximity Sensor , Cyl Head Gkt Hydreleaf Valve Of Yuktirath Part No Nk-Pl400016, Pressure Sensor Of Yuktirath Part No Nk-Pf400007, , All Terrain Vehicle (Mha) Total Quantity : 5

BRR:7478009 Bids Are Invited For Pr 22631 Spares For Thickener Del-3942-22-Hppy-18 , Manually Operated Directional Control Valve ,Part Code No Del-3942-22-Hppy-19 , Shuttle Valve Cartrige ,Part Code No Del-3942-22-Hppy-20 , Pressure Switch ,Part Code No Del-3942-22-Hppy-21 , Remote Control Relief Valve ,Part Code No Del-3942-22- Hppy-24 , Cartridge Type Check Valve ,Part Code No Del- 3942-22-Hppy-25 , Solenoid Operated Directional Control Valve ,Part Code No Del-3942-22-Hppy-26 , Pilot Operated And Check Modular Valve ,Part Code No Del-3942-22-Hppy- 27 , Pressure Gauge ,Part Code No Del-3942-22-Hppy-30 , Hand Pump ,Part Code No Del-3942-22-Hppy-31 , In-Line Check Valve ,Part Code No Del-3942-22-Hppy-32 , Minimess Coupling ,Part Code No Del-3942-22-Hppy-33 , In-Line Check Valve ,Part Code No Del-3942-22-Hppy-34 , Adaptor Block ,Part Code No Del-3942-22-Hppy-37 , Suction Strainer ,Part Code No Del-3942-22-Hppy-38 , Gear Pump ,Part Code No Del-3942-22-Hppy-39 , Flexible Drive Coupling Us-O-10 ,Part Code No Del-3942-22-Hppy-40 , Bell Housing Casting ,Part Code No Del-3942-22-Hppy-41 , Temperature Guage ,Part Code No Del-3942-22-Hppy-45 , Pressure Gauge ,Part Code No Del-3942-22-Hppy-48 2 34 , Universal Indicator Total Quantity : 49

BRR:7477209 Bids Are Invited For Custom Bid for Services - Undertaking serviceability checks of three window wipers in view of getting stuck intermittently, Job involves repair of window wiper motor, renewal of belt and alignment of motor with railing Repair and Overhauling Service Repair, Maintenance, and Installation of Plant/ Systems/Equipments (Version 2) Repair, Maintenance and Installation of Plant/ Systems/Equipments Total Quantity :

BRR:7477115 Bids Are Invited For Field Coil Assy Field Coil Assy , Bty Cut Off Switch , Brush Gear Assy , Combination Switch , Air Pressure Horn , Wabco Clutch Booster , Switch Lock Iginition , Major Kit For Caliper , Assy Vaccum Hose For Tc , Assypipe Coolent By Pass Field Coil Assy, Bty Cut Off Switch, Brush Gear Assy, Combination Switch, Air Pressure Horn, Combination , Tripping Coil Total Quantity : 15

BRR:7477063 Bids Are Invited For Mt Lpd 09 Air Filter Primary , Timer Solenoid , Electronic Flasher , Door Trim Pannel Rh , Fan Leaf Assy10 Blade 520Mm Dia , Clutch Magnetic Non Vehicular Over , Light Marker Clearance Roof Lamp Rh , Clutch Booster , Clutch Booster Vg 3284 , Fuel Filter Fj 4A4 , Electromagnetic Switch Km 311 , Switch Box9502 , Pressure Switch , Cable Safety , Fuel Filter , Bulb 24V 70W H3 Pk 22S , Solenoid , Assy Cable Complete , Belt V Ribbed , Assy Prop Shaft Complete Air Filter Primary, Timer Solenoid, Electronic Flasher, Door Trim Pannel Rh, Fan Leaf Assy10 Blade 520Mm Dia, Clutch Magnetic Non Vehicular Over, Light Marker Clearance Roof Lamp Rh, Clutch , Troop Carrier Police Vehicles (V2) Total Quantity : 380

BRR:7488644 Bids Are Invited For Custom Bid for Services - Lump sum Charges Incl GST for First Year PM and Service of Rockwell and Micro Hardness Tester , Custom Bid for Services - Lump sum Charges Incl GST for Second Year PM and Service of Rockwell and Micro Hardness Tester , Custom Bid for Services - Lump sum Charges Incl GST for Third Year PM and Service of Rockwell and Micro Hardness Tester Customized AMC/CMC for Pre-owned Products Customized AMC/CMC for Pre-owned Products Total Quantity :

BRR:7488588 Bids Are Invited For Pile Integrity Tester , Portable Or Mobile Surface Roughness Tester Total Quantity : 1

BRR:7482110 Tender For Construction Of 5 Tpd Micro Compost Centre (Mcc) In Ward No 7; 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil,wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil otherthan sand in layers of 15cm thick well rammed and cleaning and levelling the site etc.,complete 2 Plinth Beam short wall 3 Supplying and filling in foundation andbasement with filling sand in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 4 Plain Cement concrete 1:4:8 (one cement, four sand, eight aggregate) using 40mm gauge hardbroken granitestone jelly for foundation including dewatering if foundnecessary and laid in layers of not more than 15cmthick and compacted,etc., complete complying withstandard specification. 5 Supplying and filling the basement with Good Earth filling in layers of not more than 15cmthick well rammed watered and compacted - etc., complete complying with standard specification. 6 Providing and laying, spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. 7 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation 8 a) Without Strutting 9 b) With Strutting 10 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. (No separate payment will be made by the Department for the excess usage of materials) - Upto Basement 11 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors as per standard specification. 12 Plain Cement Concrete 1:1.5:3 (one cement, one and half fine aggregates and three coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification 13 Brick work in CM 1:5 (one cement & five sand) using Fly ash bricks size of 230 x 110 x 70mmincluding finishing, curing, etc., complete complying with standard specification 14 Plastering with cement mortar 1:5 (One Cement, Five Sand) 12mm thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications. 15 Painting two coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, preparing the surface and curing etc., complete. 16 Supplying and erecting pull and push type rolling shutter with I.S.I. make of approved size and section using 18 gauge G.I.sheet with manually operated type. The Shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc, complete as per standard specification. 17 Paintingwith Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. 18 Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification 19 Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. 20 Supplying laying and jointing G.I. Pipes of approved quality and best varity of B Class pipe of the following sizes including fixing G.I specials but excludingcost of such specials cutting threading of pipes andfixing to wall with necessary teak wood plugs, clamps and screws masking holes on the wall or drilling holesin roof and making good the dismandled portions to original conditions with necessary brick work and concrete and plastering where ever necessary with necessary scafolding charges. The pipes are to be painted with two coats of good variety and best approved quality of synthetic enamel paint over a priming coat of red-oxide primer etc., complete. 21 20MM dia,G.I pipe 22 25MM dia,G.I pipe 23 Supplying and fixing in position first quality and approved variety of Gun Metal Gate Valve (Heavy type ) with I.S.I.mark of the following sizes including cost of Shellac , thread etc,.including labour for cutting and threading of G.I.Pipes etc.,complete complying with standard specifications for both internal and external water Supply arrangements. 24 25mm dia G.M.Gate Valve 25 R.C.C.Jolly by a new of followingsize in R.C.C. 1:1.5:3 using 20mm gauge hard broken granite stone jelly and river sand excluding cost of reinforcement but includingcharges,fabrication chargescuring neat finishing and labour charges for fixing the jolly in position with standard spefication 26 Plastering in Cement Mortar 1:3 Mix (one Cement, Three sand ) 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete . complying with std. specifications as per TNDSS No.56 & 57 27 Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges. 28 32MM dia,PVC pipe 29 25mm dia.PVC pipe 30 Suppling and fixing in position15mm.diameter brass screw down tap(heavy duty) of approved make conforming to I.S.specifications and quality including cost of shellac, thread etc.complying with standard specifications and including cutting and threading wherever necessary. 31 Supply and fixing of following Plumbing G.I.materials 32 20mm dia G.I coupling 33 20mm dia G.I Tee 34 20mm dia G.I Elbow 35 20mm dia G.I Bend 36 25mm dia G.I coupling 37 25mm dia G.I Tee 38 25mm dia G.I Elbow 39 25mm dia G.I Bend 40 25mm dia G.I union 41 20mm X 15mm dia G.I Reducer 42 20mm X 15mm dia G.I Reducer Elbow 43 Supplying and fixing in position P.V.C. specials such as plain bend, door bend, plain tee, door tee, offsets,Y-junction, plain or with door of various sizes best quality confirming to I.S.S and providing leakproof joints including fixing to wall and giving connection to the P.V.C, soil stacks, dismadling the brick masonry or R.C.C.floor or Roof slab and redoing the dismandled portion to original condition etc., complete complying with standard specifications. 44 110mm dia PVC Elbow 45 110mm dia PVC Tee 46 Supplying and fixing in position best quality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providing leakproof joints including fixing to the wall with P.V.C/ M.S clamps etc., and making connection to all sanitaryfittings, dismandling masonry/R.C.C. works wherever necessary and making good the dismandled portion to the original condition, complying with standard specifications. 47 110mm dia PVC 6KSC Pipe 48 Supply and delivery of 1000 lit capacity and fixing of HDPE tank as per IS 12701/1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,complete as per standard specification. 49 Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for PVC Open light point / Fan point (For Electronic regulator). SD 22 50 Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. SD 54 51 Supply and fixing of single box type 436 W flu fitting complete with Electronic ballast and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting SD 87 52 Earthing as per P.W.D. standard with an earth electrode of 2Mtr. Class B GI pipe of dia not less than 32mm complete with necessary masonry work.SD 234 53 Supply and run of 2 of No.8 SWG GI wire for guarding with cradle with No.8 SWG GI wire at the equal interval of 1.5mSD.75 54 Supply and run of 4 X 6 sq.mm (84/0.3) 7/20sqmm PVC unshealed copper cable in suitable PVC rigid pipe concealed on wall and ceiling withcontinuos earth wire connection of 14 SWG TCwire with painting of suitable colour SD 68 55 Wiring with 2 x 4sqmm (56 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for15A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire for Open PVC power plug point.SD 41 56 Supply and fixing of TNEB Board suitable for 3 Phases 63A service connection made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2 x 1 1/2 x 1/4 rigidly fixed on wall covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos 63A fuse units(500V) 1 No. Neutral link, copper earth flat of size 1 x 1/4 with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.SD 129 57 Supply, fixing and commissioning of Shredder machine only for segregation garbage should have using MS plate 20mm, 10mm, 3mm & channel 120 X 65 X 50, channel 75 x 40, L angle 40 x 60 & shaft 60mm dia. Capacity of 1Mt to 1.5Mt / Hour with single shaft cutter, stell grade blade, 10Hp motor, size 600mm X 800mm X 600mm, chute - yes (Feeding & discharge) with mannual feeding, Electrical - 10HP starter only without cable, total machine height is 2000mm and width 1200mm feeding conveyor - 1 No (Mannual) etc, complete.

BRR:7501801 Procurement Of Flood Fighting Materials And Watching Guarding Both Bank Of River Bansloi In Block Murarai-I And Murarai-Ii, Dist- Birbhum Under Bansloi (E) Section Of Nalhati (I) Sub-Division Of Mnc Division During The Year 2025-26- 1 Cutting uprooting and clearing jungles including shrubs, water weeds, bushes, trees, plants, upto 30 cm. girth including removing as directed by Engineer-in-charge. 2 Earthwork in closing ghoges in embankments including cutting, filling, puddling with water and ramming including all leads and lifts, if necessary. 3 Supplying to site empty cement polythene bags (capacity 50kg) in good condition including stacking, incedental charges etc. all complete(capacity 50 kg). 4 Labour charges for filling empty cement gunny bag / polythene bag (capacity 50 kg) with all kinds of earth (wet or dry), sand or agreegates(stone / brick) and sewing as done in case of cement bags ,(tying with a knot after filling will not be accepted ) , and stacking within a lead of 30 metre as per direction of Engr-in-charge (cost is excluding the cost of any types of filling materials).NB:- Volume of earth/ sand filled bags should not be less than 0.028 cum/ bag. 5 Dumping in position earth / sand filled gunny / poly bags (capacity 50 kg) within a lead of 30 metre inclusive of all lifts. 6 Supplying, dressing and stacking at site bamboo pins above 5 cm. diameter and upto 7.5 cm. diameter. (Dia. to be Measured at mid length). 7 Driving bamboo pins in standing or flowing water including scaffolding and driving appliances.(a) Where boats are not necessary. 8 Supplying, fitting and fixing with iron nails half split bamboo wailing pieces (av. dia. of bamboo not less than 5.0 cm.) 9 Earthwork in excavation in all kinds of soil for making embankments, repairs to the embankment, closing breaches etc. as per profile including supply and transporting the earth by truck or tractor or any other mechanical means on land , including loading, transporting, unloading and stacking with all lifts bothways and head load where necessary and depositing the same on embankments, clannels, filling depressions in requisite profile, levelling as per direction of the Engineer-in-charge withina lead of,A) Beyond 500 metre and upto 1.00 km

BRR:7499966 Cleaning ,Removing Bushes And Other Ancilary Civil Work At Bhatchala Record Room Compound Premises In Ward -80.

BRR:7497919 Tender For Other Work And Patch Repair In Vr Road Under Block Badhokharkhurd Part-B - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 (Excluding Cost of Bitume) 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508 (Excluding Cost of Bitume) 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510 (Excluding Cost of Bitume) 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7497914 Tender For Other Work And Patch Repair In Odr Road Under Block Badhokharkhurd - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492385 Tender For Patch Repairs And Other Miscellaneous Works In The State Highways Identified Under The Section - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @4.5 Percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. 3 Providing and applying tack coat with bitumen VG-10 bitumen pressure distributor at the rate of 0.20 kg per sum on the prepared bituminous surface cleaned with mechanical broom.As per MORT&H Clause 503 4 Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 Percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specificationclause No. 507 complete in all respects 5 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492380 Tender For Other Work And Patch Repair In Odr Road Under Tindwari Block - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492374 Tender For Other Work And Patch Repair In Vr Road Under Block Jaspura Part-A - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492369 Tender For Other Work And Patch Repair In Vr Road Under Block Jaspura Part-B - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 (Excluding Cost of Bitumen) 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508. (Excluding Cost of Bitumen) 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510. (Excluding Cost of Bitumen) 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492365 Tender For Other Work And Patch Repair In Vr Road Under Block Tindwari Part-A - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492360 Tender For Other Work And Patch Repair In Vr Road Under Block Tindwari Part-B - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 (Excluding Cost of Bitumen) 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508. (Excluding Cost of Bitumen) 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510. (Excluding Cost of Bitumen) 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7492355 Tender For Other Work And Patch Repair In Vr Road Under Block Badhokharkhurd Part-A - Clearing and grubbing road land including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300 mm, removal of stumps of such trees cut earlierand disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specification Clause 201. By Manual Means 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadem specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100kN in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-3 as per technical specification clause-405 3 Providing and applying tack coat with Bitumen VG-10 using bitument distributor at the rate of 0.30kg per sqm on the prepared bituminious surface cleaned with Hydraulic broom as per Technical Specification clause 503 4 Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per technical specification clause 508 5 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per technical specification clause 510 6 Renewing Patries 3 meters wide (1.50 m. both side) including dressing surface, filling up to 8cm depth & making namunas at ever 15.00m apart on either side slopes of 1 : 2 etc trenches for taking earth to be so dug that they form a continous side drain at road boundary

BRR:7487793 Bids Are Invited For Bearing Housing Sn-50 Grease Lub. - 90 Mm Shaft Dia. With V-Felt Seal. , To Be Supplied With Grease Ni Bearing Housing Sn-520 Grease Lub.- 90 Mm Shaft Dia. With V-Felt Seal.,To Be Supplied With Grease Nipple & Adaptor For Rtd Fixing As Per Ys-68-1 With , Plummer Block Assembly Total Quantity : 2

BRR:7486838 Establishment Of Open Gymnasium At Various Places Under Tourism Department - Supply And Installation Of Outdoor Gym Equipment Supply And Installation Of Outdoor Gym Equipment , Supply & Installation Of Outdoor Gym Equipments , Od91983/2023_2024 : Air Walker - Supply And Installation Of Air Walker Having The Following Specifications: Dimensions: (L X W X H) 1190 X 380 X 1244 Mm. Main Frame- Ø 88 Mm Od “B” Class Gi Pipe Dually Bending Design. Foundation Plate –M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Paddle– Ø 42 Mm Od Round Gi Pipe. Handle – Ø 33 Mm Od “B” Class Gi Pipe. Footrest - Cast Iron 124 X 296 X 5 Mm Thick And M.S. Plate Of 2 Mm Thick Use To Support It. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap’S - Pp / Nylon / Hdpe Material. Bracket - 8 Mm Thick Laser Profile Is Use To Support Paddle Frame. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Pin’S – Ø 25Mm M.S. Bright Bar Pin. Circlips– A 24 Circlips Are Used For Assembly. Bearing Bushes -Ø 60 Mm Od Seamless Pipe. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91984/2023_2024 : Chest Press (Double) - Supply And Installation Of Double Chest Press Having The Following Specifications: Dimensions: (L X W X H) 1955 X 710 X 1900 Mm. Main Center Pipe - Ø 114 Mm Od “B” Class Gi Pipe. Foundation Plate –M.S. Round Plate Of Ø 250Mm & 8 Mm Thick. Foundations Cover Cap- Dome Shape Of Pp / Nylon / Hdpe Material. Remaining Frame - Made Up Of Ø 48 Mm Od “B” Class G.I. Pipe. Handle - Made Up Of Ø48mm Od “B” Class G.I. Pipe. Link - Made Up Of Ø 48 Mm Od “B” Class G.I. Pipe. Seat & Back Rest – 380 X 275 X 60 Mm Thick High-Density Polyethylene (Hdpe) Blow Molded With M10 In-Sert Wall Thickness 3 To 4 Mm. Bearing Bush Closing Cap’S– Pp / Nylon / Hdpe Material. Handle Must Be Connected With Frame By 8 Mm Laser Cutting Ms Profile. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brands. Pin – Made Up Of Ø 25 Mm M.S. Bright Bar Pin. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Grips - High Quality Rubber Ø 46 Mm Od. Circlips–A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91985/2023_2024 : Triple Twister - Supply And Installation Of Triple Twister (Standing Position - 2 And Seating Position - 1) Having The Following Specifications: Dimensions: (L X W X H) 1500 X 1500 X 1420 Mm. Main Frame – Ø 114 Mm Od “B” Class Gi Pipe. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Seat Plate Support – Ø 60 Mm Od “B” Class G.I Pipe. Seating Ring - Ø 33 Mm Od “B” Class G.I Pipe Made By Rolling. Seating Ring Support - Ø 33 Mm Od “B” Class G.I Pipe. Remaining Frame – Is Made By 100 X 50 X 2.5 Mm Rectangular Pipe. Standing Plate- Ø 300 Mm Od X 10 Mm Thick M.S. Plate. Seating Plate- Ø 300 Mm Od X 10 Mm Thick M.S. Plate. Seating Seat Position And Other Two Standing Position Plates Are Fixed 120 Degrees Each From Other. Handle – Ø 33 Mm “B” Class G.I. Pipe Made By Rolling. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Used Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Pin – Made Up Of Ø 25Mm M.S. Bright Bar. Circlips– A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80 -120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91986/2023_2024 : Leg Press (Double) -Supply And Installation Of Double Leg Press Having The Following Specifications: Dimensions: (L X W X H) = 1676 X 400 X1500 Mm. Main Frame - Ø 114 Mm Od “B” Class Gi Pipe. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Foundations Cover Cap - Dome Shape Of Pp / Nylon / Hdpe Material. Link - Is Ø 60 Mm Od “B” Class Gi Pipe. Seat Frame - Ø 42 Mm Od “B” Class Gi Pipe. Leg Press Back Rest Should Be Angled In 120 -130 Degree. Foot Rest - Cast Iron 124 X 296 X 5 Mm Thick And M.S Plate Of 2 Mm Thick Use To Support It. Seat & Back Rest – 380 X 275 X 60 Mm Thick High-Density Polyethylene (Hdpe) Blow Molded With M10 In-Sert Wall Thickness 3 To 4 Mm. Link Connected With Frame By 8 Mm Thick Laser Cutting Ms Profile. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap’S- Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded At Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Pin– Ø 25 Mm M.S. Bright Bar Pin. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Circlip– A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80 -120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91987/2023_2024 : Rower - Supply And Installation Of Rower Having The Following Specifications: Dimensions: (L X W X H) = 1472 X 915 X 1040 Mm. Upper And Bottom Pipes - Ø 88 Mm Od “B” Class Gi Pipe. Foundation Plate –M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Handle - Ø 33 Mm Od “B” Class G.I Pipe. Angle Between Handle And Horizontal Surface Is 75 - 80 Degree. Linkages – Ø 48 Mm Od “B” Class G.I. Pipe. Seat & Back Rest – 380 X 275 X 60Mm Thick High-Density Polyethylene (Hdpe) Blow Molded With M10 In-Sert Wall Thickness 3 To 4 Mm. Foot Resting Pipe - Ø 60 Mm Od “B” Class G.I. Pipe. End Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Caps – Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø250 Mm & 8Mm Thickness Is Welded At Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Pin – Ø 25 Mm M.S. Bright Bar Pin. Circlips– A 24 Circlips Are Used For Assembly. Bearing Bushes - Ø 60 Mm Od Seamless Pipe / Bar. Bearing- Use Is 6005 Permanent Lubricated Reputed Brands. Grips – High Quality Rubber 46 Mm Od. Coating - Best Quality Of Powder Coating 80 -120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91988/2023_2024 : Shoulder Builder (Double) - Supply And Installation Of Double Shoulder Builder Having The Following Specifications: Dimensions: (L X W X H) 890 X 558 X 1500 Mm. Main Frame - Made From Ø 114 Mm Od “B” Class G.I. Pipe. Foundation Plate –M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Foundation Cover Cap - Dome Shape Of Pp / Nylon / Hdpe Material. Shoulder Ring Pipe - Ø 33 Mm Od “B” Class G.I Pipe. Shoulder Ring Pipe Support – Ø 25 Mm Od “B” Class G.I Pipe. Nylon Knob With Bearing – Is Fixed On Shoulder Ring Pipe For Rotating Purpose (2 Set To Be Fixed In A Position For Kids And Adults). Top Closing Cap’S- Pp / Nylon / Hdpe Material. Closing Cap – Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded At Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brands. Pin – Ø 25 Mm M.S. Bright Bar Pin. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick.
Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Circlips – A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80 -120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91989/2023_2024 : Sit-Up Board - Supply And Installation Of Sit-Up Board Having The Following Specifications: Dimensions: (L X W X H) 1570 X 450 X 660 Mm. Main Frame - Made From Ø 33 Od “B” Class G.I. Pipe Bending Design. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Leg Support - Ø 60 Mm Od “B” Class G.I Pipe. Remaining Frame - Ø 60 Mm Od “B” Class Gi Pipe And 100 X 50 Ms Pipe. Backrest Seat - Made Of M.S Checkered Plate Sheet Of 3 Mm Thickness Size 1100 Mm X 310 Mm. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80 -120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91990/2023_2024 : Sky Walker - Supply And Installation Of Sky Walker Having The Following Specifications: Dimensions: (L X W X H) 1720 X 910 X 1700 Mm. Main Frame - Made Of Ø 88 Mm Od “B” Class Gi Pipe Dually Bending Design. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Paddle Vertical Support - Ø 42 Mm Od “B” Class Gi Pipe. Handle - Ø 33 Mm Od “B” Class Gi Pipe Dually Bending Design. Leg Movement Frame – 50 Mm X 50 Mm X 2 Mm Thick Square Pipe. Footrest - Cast Iron 124 X 296 X 5 Mm Thick And M.S. Plate Of 2 Mm Thick Use For To Support It. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap’S– Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm M.S Pipe. And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Grips - High Quality Rubber Ø 46 Mm Od. Bearinguse Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Pin –Made Of Ø 25Mm M.S. Bright Bar. Circlips – A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91991/2023_2024 : Surfboard - Supply And Installation Of Surfboard Having The Following Dimensions: (L X W X H) 1090 X 890 X 1390 Mm. Main Frame – Made From Two Pipes Of Ø 114 Mm Od “B” Class Gi Pipe. Foundation Plate –M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Connecting Pipe - Ø 88 Mm Od “B” Class Gi Pipe Is Used To Connect Both Main Frame Pipes At Top End And Ø 42 Mm Pipe Is Used To Connect At Bottom End. Handle - Ø 42 Mm And Ø 33 Mm Od “B” Class Gi Pipe. Support Pipe – Ø 60 Mm Must Be Used To Support Leg Movement Frame. Leg Movement Frame– Ø 42Mm Od “B” Class Gi Pipe. Footrest - Cast Iron 325 X 270 X 8 Mm Thick And M.S. Plate Of 250 X 200 X 2 Mm Thick Use For To Support It. Bracket - 8Mm Thick Laser Profile Is Use To Support Leg Movement Frame. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap’S– Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded At Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Grips - High Quality Rubber Ø 46Mm Od. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Pin – Made Of Ø 25Mm M.S. Bright Bar. Circlips – A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80 -120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91992/2023_2024 : Cross Trainer (Double) - Supply And Installation Of Double Cross Trainer Having The Following Specifications: Dimensions: (L X W X H) 2280 X 550 X 1650 Mm. Main Frame- Made Of Ø 88 Mm Od “B” Class Gi Pipe Dually Bending Design. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Paddle Vertical Support - Ø 42 Mm Od “B” Class Gi Pipe. Handle - Ø 33 Mm Od “B” Class Gi Pipe Dually Bending Design. Leg Movement Frame – 50 Mm X 50 Mm X 2 Mm Thick Square Pipe. Footrest - Cast Iron 124 X 296 X 5 Mm Thick And M.S. Plate Of 2 Mm Thick Use For To Support It. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap’S– Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od B Class G.I. Pipe. And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Grips - High Quality Rubber. Bearing- Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - Ø 60Mm Od Seamless Pipe. Pin –Made Of Ø 25Mm M.S. Bright Bar. Circlips – A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80-100 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91993/2023_2024 : Back Extension - Supply And Installation Of Back Extension Having The Following Specifications: Dimensions: (L X W X H) 1060 X 730 X 990 Mm. Main Frame - Made From Ø 88 Mm Od “B” Class G.I. Pipe. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Leg Support - Ø 42 Mm Od “B” G.I Pipe. Seat Rest Pipe – Ø 42 Mm Od “B” Class G.I Pipe. Handle Pipe – Ø 33 Mm Od “B” Class G.I Pipe. Footrest - Cast Iron 124 X 296 X 5 Mm Thick And M.S Plate Of 3 Mm Thick Used To Support It. Footrest Pipe – Ø 42 Mm Od “B” Class G.I Pipe And 80 X 40 Mm Ms Rectangular Pipe. Closing Cap – Pp / Nylon / Hdpe Material. Seat – 360 X 300 X 2 Mm Thick M.S. Seat With Corner Fillet For Safety. Grips - High Quality Rubber Ø 46 Mm Od. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing.. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91994/2023_2024 : Push-Up Bar And Dip Station - Supply And Installation Of Push-Up Bar And Dip Station Having The Following Specifications: Providing And Fixing Push Up Bar Made From G.I. Pipe. Dimensions: (L X W X H) 1220 X 530 X 1500 Mm. Main Frame - Ø 88 Mm Od “B” Class Gi Pipe. Leg & Hand Support - Ø 33 Mm Od “B” Class Gi Pipe. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Top Closing Cap – Dome Shape Made By Pp / Nylon / Hdpe Material. Closing Cap’S- Plastic Molded. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80 - 120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91995/2023_2024 : Arm And Paddle Bike - Supply And Installation Of Arm And Paddle Bike Having The Following Specifications: Dimensions: (L X W X H) 990 X 500 X 880 Mm. Main Frame –100 Mm X 50 Mm X 2.5 Mm Rectangular Cr Pipe With Bending Design. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Handle – Ø 33 Mm Od “B” Class Gi Round Pipe Dully Bending Design. Side And Top Cover – 1.6 Mm Thick Ms Laser Cutting Profile Is Used. Seat – 380 X 275 X 60 Mm Thick Hdpe Blow Moulding. Paddle –100 Mm X 50 Mm Capsule Pipe And 40 X 16 Mm Ms Flat Should Be Used For Connecting The Paddle And Shaft. Closing Cap’S – Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing Bushes - Ø 60 Mm Od Seamless Pipe. Bearing - Use Is 6005 Permanent Lubricating Sealed Reputed Brand. Shaft -Made Up Of Ø25mm Od Ms Bright Bar. Circlips– A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 80 - 120 Micron. Safety Instructions And Exercise Chart - Start & Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing.. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91996/2023_2024 : Horse Rider - Supply And Installation Of Horse Rider Having The Following Specifications: Dimensions: (L X W X H) 1140 X 400 X 1400 Mm. Main Frame - Ø 114 Mm Od “B” Class Gi Pipe. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Foundation Cover Cap - Dome Shape Of Pp / Nylon / Hdpe Material. Remaining Frame – Is Made By Ø 48 Mm Od “B” Class Gi Pipe. Seat Frame – Is Made By Ø 48 Mm Od “B” Class Gi Pipe. Seat Position Must Be Horizontal To 110 -120 Degree. Link - Made Up Of Ø 48 Mm Od “B” Class G.I. Pipe. Angle Between Link And Ground Position Is 10-20 Degree. Handle - Ø 33 Mm Od “B” Class Gi Pipe. Paddle Vertical Support - Ø 60 Mm Od “B” Class Gi Pipe. Handle Frame- Ø 42 Mm Od “B” Class Gi Pipe Dually Bending Design. Foot Pipe - Ø 33 Mm Od “B” Class Gi Pipe. Support Frame – 10 Mm Thick Ms Flat Is Used. Seat- Dimension 320 X 270 X 100 Mm Blow Moulded Wall Thickness 4Mm Material Hdpe. Bearing Bush Closing Cap – Pp / Nylon / Hdpe Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded At Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Bearing - Use Is 6005 Permanent Lubricated Reputed Brand. Bearing Bushes - Ø 60Mm Od Seamless Pipe. Pin – Made Of Ø 25 Mm M.S. Bright Bar. Grips - High Quality Rubber Ø 46 Mm Od. Circlips – A 24 Circlips Are Used For Assembly. Coating - Best Quality Of Powder Coating 60 To 70 Micron. Safety Instructions And Exercise Chart - Start &Finish Position Stick On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment) , Od91997/2023_2024 : Single Bar - Supply And Installation Of Single Bar Having The Following Specifications: Dimensions: (L X W X H) 3550 X 2590 Mm. Main Frame - Made From Ø 48 Mm Od “B” Class G.I. Pipe. Frame Of Single Bar – Ø 33 Mm Od “B” Class G.I. Pipe. Foundation Plate – M.S. Round Plate Of Ø 250 Mm & 8 Mm Thick. Top Closing Cap’S - Decent Design Size Pp / Hdpe / Ms. Material. Foundation Stool: Made From Main Pipe Ø 88 Mm Od M.S Pipe And Top Support Of M.S. Round Plate Of Ø 250 Mm & 8 Mm Thickness Is Welded Top. Square Tube Of 30 X 30 X 2 Mm Must Be Used To Support Center Pipe. Height Of Stool Is 3 Ft. Foundation Stool Is Embedded In C.C. Stock Below Ground Level. Coating - Best Quality Of Powder Coating 80-120 Micron. Safety Instructions And Exercise Chart – Made From Aluminum / Stainless-Steel Stick-On Product. All Joints Must Be Robotic Welded And Zinc Primer Paint Should Be Applied At All The Welding Points Prior To Finishing. (Should Be Ce Certified For General Product Safety Directive En-16630 & Din En 16630:2015 Safety Requirement & Test Methods Permanently Installed Outdoor Fitness Equipment)

BRR:7485701 Sale Of Condemned Scrap , Ts101-Cond.Iron Seat Frames,Luggage Carriers,Ladders,Side Angle Cutting Pieces,Railpipes,Gi & Ms Pipe Cuting Pieces , Ts118-Cond.Old Empty Plastic Barrels , Ts120-Cond.Iron Clutch Spares (Clutch Springs,Fingers,Withdrawal Plates Etc) , Ts126-Cond.Wooden Scrap And Wood Cutting Pieces,Plywood Pieces, Reepers Etc., , Ts156-Cond.Alltypes Of (Rexins,Seat Cushions,Rubbers,Filter,Plastic Parts,Hoses,Fanbelts,Gaskets,Linings,Damaged Plywoods,Sweeping Dust Etc., , Ts159-Cond.All Types Of Air Filters Etc., , Ts160-Cond.Iron All Types Of Clutch Disc (Ley & Tata) , Ts166-Cond.Iron-All Types Of Slack Adjuster , Ts219-Cond.Iron Broken Spring Leaves , Ts221-Cond.Alltypes Of (Rexins,Seat Cushions,Rubbers,Filter,Plastic Parts,Hoses,Fanbelts,Gaskets,Linings,Damaged Plywood,Sweeping Dust Etc., , Ts240-Cond.Old Empty Plastic Barrels , Ts261-Cond.All Types Of Water Seperators, Stainers Etc., , Ts269-Cond.Iron All Types Of Front & Rear Brake Shoe With Or Without Linings , Ts279-Cond.Iron All Types Of Front & Rear Brake Drum , Ts280-Cond.Used Electrical Items All Types Of (Inverter,Damaged Tube Lights,Switches,Bulbs,Chokes,Light Fittings, Digital Board Etc) , Lp001-L.P. Articles (White Metal) Silver Chain (Approx Weight-21.690 Mgm)-01 No , Ts291-Cond.Used Old & Waste Oil With Barrel (210 Ltrs Capacity) , Ts306-Cond.Electronicitem-Monitors(Lcd-61,Crt-5),Keyboard-47,Scanner-1,Cpu-29,Mouse-28,Smps-27,Ups-4,Printer(Laser-4,Dot Matrix-30),Com.Printer Board-14,N.W.Switch-5 , Ts308-Cond.Rubber 10X20cclass Tyres-175 Nos; 10X20aclass Tyres-01 No; Tubless C Class Tyres-03 Nos; , Ts309-Cond.Polythene Papers And Plastic Gunny Bags , Ts310-Cond.25P 12V 180-Ah Plastic Battery-56 Nos; 21P 12V 150-Ah Plastic Battery-02 Nos; , Ts311-Cond.Iron - Cylinder Liner And Broken Pieces , Ts312-Cond.Iron Water Pump Bearings,Other Bearings,Cones,Balls & Sleeves Etc., , Ts313-Cond.Aluminium Alloys,Piston,Cooler Plate,Filter Body & Alum.Spares Etc , Ts314-Cond.All Types Of Iron Spares (Bolts,Nuts,Bushes,Cutshaft,Yoke,Valve,Joint & Gear Spares Items Etc.,) , Ts315-Cond.Iron-Gi Sheet Cutting Pieces,Damaged Paint Tins And Damaged Barrels Etc., , Ts316-Cond.Used Waste Old Invoices / Waybills , Ts317-Cond.Bus Body Shell Removed From Tn72n2013 , Ts318-Cond.Bus Body Shell Removed From Tn72n2021 , Ts246-Cond.Iron M.S Angle,Seat Frames,Luggage Carriers,Ladders,Side Angle Cutting Pieces,Gi,Ms Pipes,Seat Cushions,Window Glass And Aluminium With Iron Etc.,

BRR:7485553 Repairing Of Cabin, Cabin Door, Seat, Glass Frame Replacement Of All Pins And Bushes Etc For Ace Crane (9T) Sl. No. Jh10bc-6333/Ace-6160329228 Of Dahibari Ocp, Cv Area.

BRR:7485297 Procurement Of Spare Parts Of Rotary Breakers, Apron Feeders And Travelling Trippers Of Chp-Iv, Stps, Sarni. Procurement Of Spare Parts Of Rotary Breakers, Apron Feeders And Travelling Trippers Of Chp-Iv, Stps, Sarni. , Driven Sprocket–Double Strand, 2” Pitch, 50 Teeth, Suitable For Chain#160 For Rotary Breakers , Driven Sprocket–Double Strand, 2” Pitch, 21 Teeth, Suitable For Chain#160 For Rotary Breakers , Fabricated Sprocket–Single Strand, 4.063” Pitch, 100 Teeth, Suitable For Chain#1240 For Rotary Breakers , Drive Sprocket–Single Strand, 4.063” Pitch, 15 Teeth, Suitable For Chain#1240 For Rotary Breakers , Idler Sprocket – Single Strand, 4.063” Pitch, 21 Teeth, Suitable For Chain#1240 For Rotary Breakers , Sprocket Segment– Single Strand, 215.9 Mm ( 8.5” ) Pitch, 5 Teeth, ( Moc: 4140 Steel, Flame Hardened Surface ) Suitable For Crawler Type Chain For Apron Feeders. , Traction Wheel – Single Flange, Dia. 740 Mm, Width 210 Mm ( Moc:Is:2707 Gr-1, ( Flame Hardened Surface ) , Suitable For 215.9 Mm ( 8.5” ) Pitch Crawler Type Chain Of Apron Feeders. , C.S Track Wheel – Double Flange Dia. 500 Mm, Moc: Is:1030 Gr: 280-520 W ( Non-Drive ) For Travelling Trippers , C.S Track Wheel – Double Flange Dia. 500 Mm Moc: Is:1030 Gr: 280-520 W ( Drive ) For Travelling Trippers , Track Wheel Shaft Assembly ( Non-Drive ) Consist Of Shaft ( 2455 Mm Length X 110 Mm Dia., Moc:En-19 / 709M40 Bs:970 ) , 2 Nos. Double Flange Wheel Of Dia. 500Mm ( Moc: Is:1030 Gr: 280-520 W ) , 2 Nos. Bearings 22222K Fitted In Plummer Block Snh-522 , Track Wheel Shaft Assembly ( Drive ) Consist Of Shaft ( 2770 Mm Length X 110 Mm Dia., Moc:En-19 / 709M40 Bs:970 ) , 2 Nos. Double Flange Wheel Of Dia. 500Mm ( Moc: Is:1030 Gr: 280-520 W ) , 2 Nos. Bearings 22222K Fitted In Plummer Block Snh-522

BRR:7484181 Tender For Rm/2024-25-Rc-2 Phase 2 Cluster Ii ,One Year Running Contract For Various Road Stretchers For A Length Of 19.03 Km Works Under Kanhangad Section In Kasararagod District The Major Provisions Included In The Estimates Are Surface Rectification Using Mss, Bc Patchwork, Pothole Filling Using 36Mm Broken Stone, Pothole Filling Using Ready Mixed Macadam Pothole Filler, Jungle Clearance, Road Safety Items Etc. - GENERAL-RM/2024-25-RC-2 Phase 2, Cluster II ,One year running contract for various roadsfor 4 road stretchers for a length of 19.03 Km - EST(3)- works under Kanhangad section in Kasararagod District .-General Civil Work Sl. No. Item Description 1 Appendix A - Initial Rectification 2 55.4:Supplying and stacking 36mm size hard broken stone in standard heaps for measurement. 3 55.2:Supplying and stacking 12mm hard blue granite broken stone in standard heaps for measurement(IRC 3.2.1.a) 4 55.8.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 36mm departmental broken stone and compacting with power roller to get a compact surface. 5 55.9.a:Filling up pot holes (cut and formed to regular shapes and all loose and defective materials removed) after supplying a prime coat of hot bitumen using 12mm departmental broken stone and compacting with power roller to get a compact surface. 6 55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete. 7 8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes. 8 3.15:Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material with in all lifts and lead upto 1000 metres by Mechanical Means 9 4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 10 5.1.a:Providing and applying primer coat with bitumen emulsion ( SS) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 - 1.0 kg/sqm using mechanical means. 11 5.2.a:Providing and applying tack coat with bitumen emulsion( RS) using emulsion pressure distributor at the rate of 0.20 - 0.30 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. 12 OD23048/2024-2025:Provding,laying and rolling of close-graded premix surfacing material 20mm thickness composed of 11.2 mm to 0.9 mm (type-A) aggregates using penetration grade bitumen to required line grade and level to serve as wearing course om a previously prepared base, including mixing in a suitable plant , laying and rolling with a three wheel 8-10 kN static roller and finishing to required level and grades as per Technical specifications clause 509 of MORD 13 10.5.1a:Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 - For grading I Material 14 Appendix B- PRE-MONSOON WORKS 15 10.2:Maintenance of Earthen Shoulder (filling with fresh soil) Making up the loss of material/ irregularities on the shoulder to the design level by adding fresh approved soil and compacting it with appropriate equipment. 16 10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor 17 2.3.1.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thicknessIn area of light jungle - By Manual Means 18 OD23049/2024-2025:Engaging man mazdoor whenever required. 19 OD23050/2024-2025:Engaging Mate 20 OD23051/2024-2025:Engaging hydraulic excavator 0.9 cum capacity 21 OD23052/2024-2025:Engaging truck 22 Appendix C - Preventive Maintenance 23 OD23053/2024-2025:Supplying ready mixed tar macadam pothole filler (Bag of 50.00 kg) including all cost materials from trivandrum to PWD roads section office kanhangad 24 OD23054/2024-2025:CARRYING AND LAYING READY MIXED TAR MACADAM POTHOLE FILLER FROM PWD SECTION OFFICE STORE TO VARIOUS PWD ROADS INCLUDING ALL LABOUR AND CONVEYANCE CHARGES ETC COMPLETE 25 OD23055/2024-2025:Engaging labour as per requirement for conducting/reporting routine inspections and to take neccessary instructions as applicable following the guidelines of running contract all along the route for a day of inspection covering entire reach specified in the agreement and as directed by the departmental officer at site 26 OD23056/2024-2025:Hiring of inspection vehicle; wherein charges applicable as per utilization per km run to and fro at a frequency as detailed in the guidance of running contract along the route convenient to cover entire reach specified in the agreement and as directed by the departmental officer at site. 27 Appendix D- Proactive Maintenance with Emergency Works 28 12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical SpecificationsRCC Grade M20 - Using Concrete Mixer - (Without formwork) 29 12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical SpecificationsRCC Grade M20 - Using Concrete Mixer 30 12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications 31 12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. 32 8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 33 8.4.2:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 60 cm equilateral triangle 34 8.4.3:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 60 cm circular 35 8.4.4:Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign with 7years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting vide clause 801.3.3 fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with suitable back supporting frame of MS angle 25x25x3 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc. 80 mm x 60 mm rectangular

BRR:7482012 Bids Are Invited For Bearing Housing Saf-22 Grease Lub. - 120 Mm Dia. With V-Felt Seal With 4 Nos. Fixing Hole. , Drg. No. : , Plummer Block Assembly Total Quantity : 4

BRR:7481741 Engagement Of Manpower And Jcb For Cleaning Of Bushes Below The Conveyor Area And Other Miscellaneous Works At Tnpl Unit-Ii - 1 8240900001JCB EXCAVATOR WITH OPERATOR 2 8240500009UNSKILLED HELPER-PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS

BRR:7480902 Supplying Electrical Material For Nagar Panchyat Renapur Tq. Renapur Dist. Latur-1 Supplying, Erecting & Terminating Pvc Armoured Cable 4 Core 10 Sq Mm Aluminium Conductor With Continuous 5.48 Sq Mm ( 12 Swg ) G.I. Earth Wire Complete Erected With Glands & Lugs, On Wall / Trusses / Pole Or Laid In Provided Trench / Pipe As Per Specification No. Cb-Lt / Al Specification No. Cb-Lt / Al 2 Supplying & Erecting G.I. Pipe ‘A’ Class 40 Mm Dia. Erected For Enclosing Pvc Armoured Cable On Wall / Pole As Per Specification No. Cw-Plb / Gp, Para 4.2.1 & 4.2.2 ( Chapter 17.5 ) 3 Supply And Erecting 9M ( Clear Height ) Fixed Type High Mast ( Top-100Mm, Bottom- 200Mm ) With Hexagonal / Round Bracket And Foundation Bolts Suitable For Max. 4Nos Floodlight Fixtures On Provided Foundation As Per Specification No. Oh-Pl / Opl ( Excluding Luminaries ) . ( New ) 4 Supply And Erecting 12.5M ( Clear Height ) Fixed Type High Mast ( Top-110Mm, Bottom- 242 Mm ) With Hexagonal / Round Bracket And Foundation Bolts Suitable For Max. 6 Nos Floodlight Fixtures On Provided Foundation As Per Specification No.Ohpl / Opl ( Excluding Luminaries ) 5 Providing Pipe Type Earthing With 40Mm. Dia. G.L. Pipe Or 20 Mm Dia. G.L. Rod Complete With All Materials As Per Specification No. Ea-Ep 6 Making Trench In Soft Soil Of Suitable Width And Depth As Per Is For Laying Provided L.T Cable Up To 25 Sq Mm Complete. As Per Specification No. Cw-Exn-Ctr 7 Providing & Casting Of M- 20 Grade Reinforced Cement Concrete ( Rcc ) Foundation Suitable For 11M & 12.5M High Octagonal / Conical G.I. Pole Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Emplate As Per Design In An Approved Manner 8 Providing & Casting Of M- 20 Grade Reinforced Cement Concrete ( Rcc ) Foundation Suitable For 9M & 10M High Octagonal / Conical G.I. Pole Considering The Safe Soil Bearing Capacity At Site As 10 T / Sq M At 1.5 M Depth Including Supply Of Steel, Concrete, Excavation And Fixing Provided Nut Bolts With The Help Of Template As Per Design In An Approved Manner. 9 Supplying And Erecting Street Light Wall Bracket Made From 25 Mm.Dia ‘B’Class G.I. Pipe 1.2 M In Total Length Complete As Per Specificationno. Fg-Bkt / Wb 10 Supplying And Erecting Iron, Sheet Metal Work Consisting Of Crca Sheets, Various Sections Of Iron, Plates, Chequered Plates, Rods, Bars, Ms Pipes, Etc. For Panel Board Or Any Other Purposes Complete With Bending, Cutting, Drilling And Welding Complete Erected At The Position With Necessary Materials Duly Painted With One Coat Of Red Oxide And Two Coats Of Enamel Paint To Match The Switchgears Or As Per Directions By The Authority 11 Providing And Erecting Galvanised 1000Mm Single Arm Sword Type Bracket With Frp Dome And Ball As Per Specification No. Oh-Pl / Pbkt 12 Providing & Erecting 9 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 155 Mm A / F, Top 70 Mm A / F On Provided Foundation As Per Specification No.Ohpl / Opl 13 Providing & Erecting 9 M High ( Clear Height ) Galvanised Octagonal Pole With Foundation Bolts Having Bottom Of 155 Mm A / F, Top 70 Mm A / F On Provided Foundation As Per Specification No.Ohpl / Opl 14 Supplying And Erecting All Aluminium Stranded Conductors 7 / 2.48 Mm.Complete. ( Lris ) ( 91.8 Kg / Km ) As Per Specification No. Oh-Con / Aac 15 Supplying And Erecting Hard Drawn G.I. Wire 8 Swg Complete Erected For Overhead Line With Proper Size Of G.I. Wire For Binding With Jumpering Etc. 16 Supplying And Erecting Pin Type Lt Medium Insulator 100 Mm X 62 Mm Dia. With Suitable G.L. Spindle, Nut, Bolts Complete Erected 17 Supplying And Erecting Porcelain Shackle Type Lt Medium Insulator 75X115 Mm Dia. With G.L. Strips, Nuts And Bolts, Complete. 18 Supplying And Erecting Porcelain Shackle Type Lt Medium Insulator 50 X 89 Mm Dia. With G.L. Strips, Nuts And Bolts, Complete. 19 Supplying And Erecting Aluminium Bobbin With G.L. Strip, Nuts Complete. 20 Providing And Fixing Earthing Stud With Necessary Materials. 21 Supplying And Erecting G.L. Stay Set For Poles, Including Loop Insulators At Inaccessible Height Complete With Anchor Plate 300 X 300 X 6 Mm., Straining Screws, G.L. Stay Wire 7 / 8 Swg, G.L. Stay Rod 20 Mm X 1.8 M Length And Pole Clamps Duly Erected In Provided Cement Concrete Foundation. 22 Supplying And Erecting Pole Clamp Made From 50 X 6 Mm Ms Flat For Pole Or Pipe, Post Complete Erected With 15 Mm Bolts And Nuts, Complete Duly Painted With One Coat Of Red Oxide And Two Coats Of Aluminium Paint. 23 Supplying And Erecting Rolled Steel Joist ( Girder ) Pole 175 X 85 Mm ( 19.6 Kg / M ) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj 24 Supplying And Erecting Rolled Steel Joist ( Girder ) Pole 100 X 116 Mm ( 23 Kg / M ) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj 25 Supplying And Erecting Rolled Steel Joist ( Girder ) Pole 125 X 70 Mm ( 13.3 Kg / M ) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj 26 Supplying And Erecting Rolled Steel Joist ( Girder ) Pole 125 X 70 Mm ( 13.3 Kg / M ) With Provided Base Plate In Provided Foundation As Per Specification No. Oh-Pl / Rsj 27 Supplying And Erecting Psc Rectangular Pole Of Top 105 X 115 Mm & Bottom Of 105 X 315 Mm 9 M Long ( 510 Kg ) Complete Erected In Provided C. C. Foundation & Muffing ( Square / Round ) As Per Specification No. Oh-Pl / Psc 28 Supplying Ms Pole Bracket For Guarding, Fabricated From Angle Iron 50X50x6 Mm And 1100Mm Long For 4 Insulators, And Erecting On Pole With 50X6mm Clamp Complete As Per Specification No. Oh-Pl / Bkt 29 Supplying And Erecting Led Street Light Fitting 12 To 18 W, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-Odf / Fls-2 30 Supplying And Erecting Led Street Light Fitting Suitable For 20 To 25W, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-Odf / Fls-2. 31 Supplying And Erecting Led Street Light Fitting Suitable Above 26W To 36W Lamp, Including Lamp, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-O 32 Supplying And Erecting Led Street Light Fitting Suitable For Above 40W To 48W Lamp, Including Lamp, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg 33 Supplying And Erecting Led Street Light Fitting Suitable For 60W Lamp, Including Lamp, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete As Per Specification No Fg-Odf / Fls-2. 34 Supplying And Erecting Led Street Light Fitting Suitable For Above 70W-75 Lamp, Including Lamp, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg-Odf / 35 Supplying And Erecting Led Street Light Fitting Suitable For Above75 -90W Lamp, Including Lamp, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg-Odf 36 Supplying And Erecting Led Street Light Fitting 100W, Including Lamp, With Pf > 0.95 Class Ip 65 And Above Housing Of Pressure Die Cast-Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg-Odf / Fls-2. 37 Supplying And Erecting Led Flood Light Fitting Of 120W, Including Lamp, With Pf > 0.95, Class Ip 65 And Above Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg-Odf / Fl 38 Supplying And Erecting Led Flood Light Fitting Of 150W, Including Lamp, With Pf > 0.95, Class Ip 65 And Above Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg-Odf / Fl 39 Supplying And Erecting Led Flood Light Fitting Of 200W, Including Lamp, With Pf > 0.95, Class Ip 65 And Above Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded Alluminium Complete Per Specification No Fg-Odf / Fl 40 Supplying & Erecting Led Solar Street Light Of Appropriate Size Suitable For Lumen Efficacy 90Lumen / Watt At Ground Level With Mounting Height Of Fitting 5-7 M Height From Ground With Ip 65 Ingress Protection With 24 / 26W, Lux Level At Ground Min 50 Lux, With P.F. > 0.95 With Transparent Lens As Per Specification No Esd-Led / Odf 41 Supplying, Erecting & Marking Tpn Mcb 40A To 63A, C- Series In Provided Distribution Board As Per Specification No. Sw-Swr / Mcb 42 Supplying & Erecting Crca Sheet Metal One Way Enclosures Suitable For D.P.M.C.B. / T.P. M.C.B. / F.P M.C.B. Complete Erected On Angle Iron Frame. 43 Supplying & Erecting Mains With 2X2.5 Sq.Mm F.R Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Other Places. As Per Specification No: Wg-Ma / Bw 44 Supplying And Erecting Street Light Wall Bracket Made From 25 Mm.Dia ‘B’Class G.I. Pipe 1.2 M In Total Length Complete As Per Specificationno. Fg-Bkt / Wb 45 Supplying & Erecting On Line Ups Pure Sine Wave Of 2 Kva Capacity Complete With Standard Features, Along With Necessary Smf Batteries For 30 Mins Battery Backup, As Per Specification No. Ap-Ups 46 Supplying & Erecting On Line Ups Pure Sine Wave Of 3 Kva Capacity Complete With Standard Features, Along With Necessary Smf Batteries For 30 Mins Battery Backup, As Per Specification No. Ap-Ups 47 Pvc Flexible Conduit 20 Mm In Dia.Supplying And Erecting Upvc Reinforced Flexible Conduit 20 Mm In Dia. Conforming To I.S. And Approved Make With Required Number Of Couplings, Pvc Bushes, Heck Nuts Etc. Complete. 48 Pvc Casing 25 Mm - Supplying And Laying Pvc Trunking ( Pvc Casing-N-Capping ) Of Size 25 Mm. With Accessories On Wall / Ceiling As Per Specification No: Wg-Ma / Con, 49 Pvc Casing 32 Mm - Supplying And Laying Pvc Trunking ( Pvc Casing-N-Capping ) Of Size 32 Mm. With Accessories On Wall / Ceiling As Per Specification No: Wg-Ma / Con 50 Bunch Of Wire 2X1.5 Sq. Mm.-Supplying & Erecting Mains With 2X1.5 Sq.Mm F.R. Solid Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Other Places As Per Specification No: Wg-Ma / Bw 51 2X2.5 Sq. Mm Bunch-Supplying & Erecting Mains With 2X2.5 Sq.Mm F.R. Stranded / Solid Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Other Places. As Per Specification No: Wg-Ma / Bw 52 1X2.5 Sq. Mm Bunch - Supplying & Erecting Mains With 1X2.5 Sq.Mm F.R. Stranded / Solid Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Other Places. As Per Specification No: Wg-Ma / Bw 53 Bunch Of Wire 4X6 Sq. Mm.-Supplying & Erecting Mains With 2X6 Sq.Mm F.R Copper Pvc Insulated Wire Laid In Provided Conduit / Trunking / Inside Pole / Bus Bars Or Any Other Places As Per Specification No: Wg-Ma / Bw 54 6A Moduler Switch-Supplying And Erecting Modular Type Switch 6A / 10A Isi Mark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete. 55 16A Moduler Switch-Supplying And Erecting Modular Type Switch 16 / 20 A With Indicator Isi Mark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete. 56 6A Moduler Socket-Supplying And Erecting Modular Type 3 Pin 6A Multi Socket With Safety Shutter Isi Mark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete. 57 16A Moduler Socket-Supplying And Erecting Modular Type 3 Pin 6 / 16A Multi Socket With Sefty Shutter Isi Mark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections 58 Step Regulator-Supplying And Erecting Modular Type Electronic Step Regulator For Fan Two Module Isi Mark Approved Make Duly Erected On Provided Plate And Box With Wiring Connections Complete. 59 Moduler Box 8 Module-Supplying And Erecting Pvc Surface Modular Switch Box With Double Mounting Plate For 8 Module Duly Erected In An Approved Manner. 60 Blanking Plate-Supplying And Erecting Modular Type Blanking Plate One Module Isi Mark Approved Make Duly Erected On Provided Plate & Box. 61 Plug Point-Point Wiring For Plug On Board Of Light Or Fan As Per Specification No:Wg-Pw / Sw 62 Point Wiring In Pvc Casing With Moduler Switch-Point Wiring In Pvc Trunking ( Casing-Capping ) With 1.0 Sqm Fr Grade Copper Wire Switches.And Required Accessaries As Per Specification No: Wg-Pw / Sw 63 Fluo.Tube Rod 36 Watt.-Supplying And Erecting T8 Fluroscent Tube Triphosper / Turband Phosper 36 W. 64 Led Lamps-Supplying & Erecting 2W-3W, 230V Integral Type Led Lamp Suitable B-22 / E-27 Base. 65 Bulkhead Fitting-Supplying And Erecting Bulkhead Fitting Suitable For Integral Cfl Upto 11W Fixed On Wall. As Per Specification No.Fg-Idf / Bhf 66 Fluo.Tube Fitting 36 Watt.Supplying & Erecting Approved Make 1 X T8 40 / 36 Watt White Stove Enamelled / Powder Coated Box Type Fluo.Fitting With 40 Watts. Electronic Ballast, Fixed At Ceiling Or On Wall. As Per Specification No.Fg-Idf / Bff 67 Fluo.Tube Fitting 2X36 Watt.-Supplying And Erecting Approved Make 2 X 36 / 40W Fluo Fitting Recess / Surface Mounting Mirror Optic Type With One 40W Electronic Ballast Having Pf > 0.90 Fixed In False Ceiling Or At Ceiling Or On Wall As Per Specification No. Fg-Idf / Mop 68 Led 18 W Ceiling Fitting-Supplying And Erecting Square / Round Shaped Crca / Die-Cast Aluminium Powder Coated Housing Led Panel ( Slim Edge-Lit ) Light Suitable For 13 To18w With Provision For Plane Front Frame With Translucent Cover Fixed To The Housing Complete. 69 Led 36 Wpanel Fitting-Supplying And Erecting Square Shaped Crca / Die-Cast Aluminium Powder Coated Housing Led Panel Light ( Slim Edge-Lit ) 600X600mm Suitable For 36 W-40W With Provision For Plane Front Frame With Translucent Cover Fixed To The Housing Complete. 70 Led 100 W Flood Light Fitting-Supplying And Erecting Led Flood Light Fitting Of 90-100W, Including Lamp, With Pf > 0.95, Class Ip 65 And Above Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded-Alluminium Complete Per Specification No Fg-Odf 71 Led 120 W Flood Light Fitting-Supplying And Erecting Led Flood Light Fitting Of 120W, Including Lamp, With Pf > 0.95, Class Ip 65 And Above Class Ip 65 And Above Housing Of Pressure Die Cast Alluminium Alloy And Heat Sink Extruded-Alluminium Complete Per Specification No Fg-Odf / Fl 72 Energy Saving Ceiling Fan-Supplying And Erecting Five Star Rated Energy Saving Ceiling Fan230 V A.C. 50 Cycles 1200 Mm Complete Erected In Position As Perspecifcation No. Fg-Fn / Cf 73 Exhaust Fan-Supplying And Erecting Fresh Air Cum Exhaust Fan Of Light Duty 250 V A.C. 50 Cycles 225Mm. 1400 Rpm Rust Proof Body & Blades, Wire Mesh, Duly Erected In An Pproved Manner And Marking Sr. No. And Date Of Erection. 74 Spmcb 6A To 32 A.-Supplying, Erecting & Marking Spmcb 6 Amp To 32 Amp C Series ( For Motor / Power ) In Provided Distribution Board As Per Specification No. Sw-Swr / Mcb 75 Spmcb 6A To 32 A.-Supplying, Erecting & Marking Spmcb 6 Amp To 32 Amp B- Series ( For Lighting ) In Provided Distribution Board As Per Specification No. Sw-Swr / Mcb 76 Tpmcb-Supplying, Erecting & Marking Tpmcb 40A To 63A In Provided Distribution Board As Per Specification No. Sw-Swr / Mcb 77 M.C.B. 12 Way-Supplying & Erecting Triple Pole And Neutral Distribution Board ( Tpndb ) With Door Surface / Flush Mounted Spmcb Of 12 Ways, On Iron Frame / Laminated Board. ( Horizontal Type ) As Per Specification No. Sw-Swr / Mcbdb 78 Tp Mcb Db Vertical 4 Way-Supplying & Erecting Triple Pole And Neutral Distribution Board ( Tpndb ) With Door Surface / Flush Mounted Sp ( 12 Poles ) / Tp ( 4 Poles ) Mcb Of 4 Ways ( 12 Poles ) , On Iron Frame / Laminated Board. ( Vertical Busbar Type ) As Per Specification No. Sw-Swr / Mcbdb 79 Tpmcb Db 8 Way-Supplying & Erecting Triple Pole And Neutral Distribution Board ( Tpndb ) With Door Surface / Flush Mounted Suitable For 3 Pole Mccb As Incommer & Outgoing Sp Mcb ( 24 Poles ) Or Tp Mcb Of 8 Ways ( 24 Poles ) , On Iron Frame. ( Vertical Busbar Type ) As Per Specification No. Sw-Swr / Mcbdb1 80 Mccb 100 A.-Providing & Erecting 3 Pole Mccb Upto 100A, 415V Capacity With S.C. Rating 25 Ka ( Ics=100% Of Icu ) , Thermal Setting With Provided Leads On Iron Frame / Laminated Board As Per Specification No. Sw-Swr / Mccb 81 Plate Type Earthing-Supplying And Erecting Galvanised Cast Iron Earth Plate Size 60 X 60 X 0.6 Cms. Complete With All Materials, Testing & Recording The Results As Per Specification No. Ea-Ep 82 Fluroscent Tube 40 W 83 Fluroscent Tube 36 W 84 Cfl36 W 85 Tube Starter 40 W 86 Starter Brass 87 Rotor Holder 88 Cfl Tap 40W Holder 89 Copper Choke 40 W 90 Electronic Ballast 36 To 40 W 91 Led 18Wtube Light Set 92 Led 20Wtube Light Set 93 Led 18W Bulb 94 Led 20W Bulb 95 Solar Led Street Light Luminarire Assembly 96 Led 20-25Wstreet Light Driver Circuit 97 Led 26-36Wstreet Light Driver Circuit 98 Led 40-48Wstreet Light Driver Circuit 99 Led 48-60Wstreet Light Driver Circuit 100 Led 70-75Wstreet Light Driver Circuit 101 Cut Out 32A 102 Cut Out 63A 103 Cut Out 200A 104 Insulation Tape 105 12 V / 40Ah Tubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 106 12 V / 80Ah Tubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 107 12 V / 150Ah Tubular Battery With Battery Terminal Wire, Duly Charged Complete With 36 Months Warranty Complete 108 Supplyingtwo Pole Power Contactor 250V 32A For Time Switch Complete 109 Supplying4 Pole Power Contactor 440V 40A For Time Switch Complete 110 Supplyingprogrammable Digital Almanac Timer Micro-Controller Based With Real Time Clock To Operate On Derived Switching “On” & Switching “Off” Street Light As Per Daily Sunset And Sunrise Respectively Automatically Having 4 Digit Led Continuous Time Display, Relay Output 230V / 10A With 10 Hrs Battery Backup And Manual Over Drive Facility Capable To Drive Different Capacity Contactors Timer 111 Pvc Cable 2 Core 10 Sq Mm Aluminium Conductor 112 Pvc Cable 2 Core 2.5 Sq Mm Aluminium Conductor 113 30 / 40 Flexible Wire 114 4Mm Multi Stand Wire 115 2.5Mm Multi Stand Wire 116 1Mm Multi Stand Wire 117 Led Type Indicating Pilot Lamp With Led Colours Red / Yellow / Green, 230 / 250V On Provided Box / Panel With Necessary Material, Wiring & Connections Etc. 118 Electronic Control Kit For Over Voltage Cut Off ( 170-270 Vac ) 119 Short Time Delay Circit With Ic 55 ( For Linr Reactor ) 120 Gi Wire 121 Relay Insulator 122 Street Light Bracket Made From 25 Mm Dia B Class G.I.Pipe, 0.6Min Length 123 Street Light Bracket Made From 40 Mm Dia B Class G.I.Pipe, 0.6Min Length C. Bracket Clamp 4 Inch Thick 1½ Inch Strip With Nutbolts Crab Bracket Clamp 4 Inch Thick With 1½ Inch Strip Nutbolt 15 Amp. Power Plate 15 Amp. Top Pin 5 Amp. Switch 5 Amp. Anchor Company 3 Pin Plug Socket 30 Amp. Indicator D. P. Switch 16 Amp. Single Phase Mcb 32 Amp. Shree Phase Mcb T-5 Tubelight Complete Set Fan Regulator Electronics Angle Holder Ceiling Rose Casing Capping Strip 7 Foot 35×8 Screw One Box 25×8 Screw One Box Rawal Plug 8×10 Sunmic Board Pedant Holder ( Studded ) Point Wages For Light Fitting Per Liter Of Distilled Water Battery Rates Per Battery Change Current Meter Digital Electronics Electric Drill Machine Single Phase Machine Heavy Gauge Repairing Of 9 Meter And 12.5 Meter Highmast Pole Labor Rate Per Pole Cfl Tube 24W Copies Cfl Tube 24W Holder Over Cfl Tube 24W Choke Cfl 4 Tube 24W Complete Set Copies Cfl Tube 24W 4 Tube Fiber Cover Copies Cfl 36W Per Bulb Cfl Complete Set Braket Per Cfl Holder Screw 2 Inch Per Cfl Sugar Holder 36W Each 1 18 Wire Copper Bundle Copy 8 Inch Clamp Raparia Copies 6-Inch Tongs Per Taparia Screw Driver Set Tester Copies Per Strip Pan Set 20 Foot Aluminum Ladder Fuse Wire Bundle 18Mm Fuse Wire Bundle 22Mm Part-Iv : Speakersut With Vehicle For Aulasing Pavilion Awning Stage 10X10 ( Per 100 Sq.Ft. ) Speaker Set Ear Number Of Generators Per Day Rent Per Day Per Maccury 250W Watt Mattelite Focus Price 1000W Focus Badhorti Installation Per Number Per Day Rent 500W Focus Halogen Floor Installation Per Numbers Per Day Rent Installation Of 1000W Metalite Bhodtri Per No. Per Day Rent Decoration Garland Hire Hire Per Nos Per Day Supplying Materials For Led Light Repair 60W Kir 60W Plate 60W Complete Set 180W Kit 80W Plate 80W Complete Set 100W Kit 100W Plate 100W Complete Set 120 W Flood Light 150 W Burst Light 120W Kit 120W Plate 150W Kit 150W Plate

BRR:7480744 Maintenance & Repair to PWSS @ Buttibori, Hingna, Kalmeshwar & Bhandara Industrial Area.. Removal of grass bushes and Rubbish from the premises @ WTP Jackwell, ESR & staff quarter premises and along the pipelinecharges etc complete

BRR:7480639 Tender For Special Repair Of Go S Mess Upper Campus At Gc Crpf, Kathgodam; 1 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: All kind of soil 2 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. 3 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres / sqm of the vertical surface of the substructure to a depth of 300mm including excavation channel along the wall & rodding etc. complete: With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration 4 Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Along the external wall below concrete or masonry apron us ing chemical emulsion @ 2.25 litres per linear metre includ ing drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration 5 Treatment of soil under existing floors using chemical emul sion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration 6 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. 7 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 9 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) 10 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. 11 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size de rived from natural sources) 12 Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete 13 Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement con crete in lintels, beams and bressumers, including setting in cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering and shuttering but , excluding the cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) 14 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. 15 Providing and fixing sheet covering over expansion joints with iron screws as per design. Aluminium fluted strips 3.15 mm thick. 200 mm wide 16 Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. 17 Providing and fixing of expansion joint system related with wall joint (internal/external) location as per drawings and direction of Engineer-In Charge. The joints shall be of extruded aluminum base members, self aligning / centering arrangement and support plates as per ASTM B221- 02. The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System.The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063). Wall Joint of 100 mm gap 18 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge. The joints shall be of extruded aluminum base members with, self aligning and self centering arragement support plates asper ASTM B221-02. The system shall be such that it provides watertight roof to roof/roof to corner joint cover expansion control system that is capable of accommodating multidirectional seismic movement without stress to its components. System shall consist of metal profile that incorporates a universal aluminum base member designed to accommodate various project conditions and roof treatments. The cover plate shall be designed of width and thickness required to satisfy movement and loading requirements and secured to base members by utilizing manufacturer’s pre-engineered self-centering arrangement that freely rotates / moves in all directions. The Self centering arrangement shall exhibit circular sphere ends that lock and slide inside the corresponding aluminum extrusion cavity to allow freedom of movement and flexure in all directions including vertical displacement. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063). Roof Joint of 100 mm gap 19 Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 20 Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand) : With Modular bricks 21 Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) 22 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) 23 Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand) 24 Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. Area of slab upto 0.50 sqm 25 Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite work 26 Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. 27 Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete. 28 Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete. 8mm thick. Raj nagar plain white marble/ Udaipur green marble/ Zebra black marble 29 Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade 30 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre-laminated one side decorative lamination and other side balancing lamination Grade I, Type II, IS : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 18 mm thick 31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 32 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes. 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). 33 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading 34 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 35 Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. Overall width 35 mm 36 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete : 200x10 mm 37 Providing and fixing bright finished brass door latch with necessary screws etc. complete : 300x16x5 mm 38 Providing and fixing bright finished brass cylindrical latch and lock of approved quality including necessary screws etc. complete. 39 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 50mm 40 Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. 75mm 41 Providing and fixing bright finished brass handles with screws etc. complete: 125 mm, 42 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. 43 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. 44 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete : 150 mm, 45 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. 46 Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. 47 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. 48 Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre- aminated particle board as per direction of Engineer-in-charge. 49 Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type 50 Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer in-charge. 51 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) 52 Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). 53 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws : 35 mm thick shutters. With ISI marked stainless steel butt hinges of required size. Second class teak wood 54 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. 55 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587 56 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately). Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick confirming to IS:14587 57 Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 12 mm thick 58 Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. 18mm thick 59 Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete.125 mm 60 Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) 61 Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes, shelves, racks, almirah, cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in charge. 62 Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm 63 Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. 64 Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per directions of Engineer- in-charge. 65 Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. 66 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 67 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces 68 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) 69 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Electric resistance or induction butt welded tubes 70 Welding by gas or electric plant including transportation of plant at site etc. complete. 71 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides 72 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. 73 Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with Jamuna sand, with common burnt clay non modular bricks. 74 Extra for making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. 75 Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Udaipur green marble 76 Extra for pre finished nosing to treads of steps of marble stone. 77 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick 78 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. 79 Cleaning including rubbing and polishing on existing kota stone floor & marble chips flooring work where ever required to give clean & bright finish complete. Existing kota stone floor 80 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 81 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. 82 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size. Size of Tile 600x600 mm 83 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size. Size of Tile 800x800 mm 84 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm includinggrouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size. Size of Tile 600 x 1200 mm 85 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 86 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent 87 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² 88 Providing valleys of 90 cm wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete : 1.60 mm thick with zinc coating not less than 350 gm/m² 89 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. 90 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase 91 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. 92 Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 100 mm diameter 93 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter 94 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 95 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer in-charge and as permanufacturers specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 96 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) 97 12 mm cement plaster of mix : 1:6 (1 cement:6 coarse sand) 98 20 mm cement plaster of mix : 1:6 (1 cement:6 coarse sand) 99 Neat cement punning. 100 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. 101 Extra for providing and fixing 250 mm vide GI chicken mess with nails or scrues before plastering on exisiting vertical & horizontal joints of RCC & brick walls. 102 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 103 Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : Flush / Ruled/ Struck or weathered pointing 104 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer 105 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 106 Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works. 107 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work 108 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 109 French spirit polishing : Two or more coats on new works including a coat of wood filler 110 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 111 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats 112 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete 113 Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : Old work (one or more coats) 114 Painting (one or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : 100 mm diameter pipes 115 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work 116 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work 117 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work 118 French spirit polishing : one or more coat on Old work 119 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface 120 Fixing chowkhat in existing opening in brick/ RCC wall with dash fasteners/Chemical fasteners of appropriate size (3 nos on each vertical member of door chowkhat and 2 nos on each vertical member of window chowkhats), including Cost of dash fasteners/ chemical fastener. 121 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge. For door/ window/ clerestory window 122 Supplying and fixing new wooden fillets wherever necessary: 2nd class teak wood fillets 123 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 124 Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm diameter. 125 Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete 126 Providing and fixing bright finished brass helical door spring (superior quality). 127 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer in-charge .The elevationalarea of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 128 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. 129 Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge. 130 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in Charge. 131 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 132 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 133 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) 134 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. 135 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar 136 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): From brick work in cement mortar 137 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below 138 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 139 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : 140 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 141 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 142 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore 143 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge:Up to 150 mm diameter 144 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. 145 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres Up to 150 mm diameter 146 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 147 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 148 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 149 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 150 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 151 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board. 510x1040 mm bowl depth 250 mm 152 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : White solid plastic seat with lid 153 Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. 154 Providing and fixing CP Brass 32/38mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. 155 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia 156 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe.40 mm dia 157 Providing and fixing 100 mm CP brass grattings with or without hole fixed with white cement or adhesive for gully trap & waste pipe as required by Engineering Incharge. 158 Providing and fixing beveled edge mirror of superior glass (of approved quality) and required shape & size complete with 6 mm thick hard board ground fixed and covered with decorative wooden moulded frame to wooden cleats with C.P. brass screws and CP round headed cap & washers complete. 159 Providing and fixing 600x120x5 mm CP glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 160 Providing and fixing toilet paper holder : C.P. brass. (Soil, waste and vent pipes) WASTE WATER SUPPLY LINE 161 Providing and fixing soil, waste and vent pipe: 100 mm dia. Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 162 Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : for 100 mm dia pipe 163 Providing and filling the existing & old joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes after proper cleaning and removal of damaged lead filling as required by Engineering Incharge: for 100 mm dia pipe 164 Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast Iron / Cast Iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : For 100 mm dia pipe 165 Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia. Sand cast iron S&S as per IS - 3989 166 Providing and fixing plain bend of required degree.100 mm dia. Sand cast iron S&S as per IS - 3989 167 Providing and fixing heel rest sanitary bend.100 mm dia. Sand cast iron S&S as per IS - 3989 168 Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : 100x100x100x100 mm.Sand cast iron S&S as per IS - 3989 169 Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm. Sand cast iron S&S as per IS - 3989 170 Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts andnutscomplete. 100x100x100 mm.Sand cast iron S&S as per IS - 3989 171 Providing and fixing single equal plain junction of required degree . 100x100x100 mm. Sand cast iron S&S as per IS - 3989 172 Providing and fixing single equal plain invert branch of required degree : 100x100x100 mm. Sand cast iron S&S as per IS - 3989 173 Providing and fixing sand cast iron S&S off sets as per IS: 3989: 150 mm off sets. With 100 mm dia pipe 174 Providing and fixing door piece, insertion rubber washer 3mm thick, bolts & nuts complete : 100 mm.Sand cast iron S&S as per IS - 3989 175 Providing and fixing terminal guard : 100 mm. Sand cast iron S&S as per IS - 3989 176 Providing and fixing collar : 100 mm. Sand cast iron S&S as per IS - 3989 177 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter : 100 mm 178 Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter : 100 mm 179 Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors:100 mm inlet and 100 mm outlet. Sand cast iron S&S as per IS: 3989 180 Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1:4 (1 cement : 4 coarse sand) : 100 mm 181 Painting sand cast iron / centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work:100 mm diameter pipe 182 Providing and fixing CP Brass Waste Coupling for wash basin, sink and urinal, of approved quality and colouras per IS : 2556 Waste coupling 31/38 mm dia of 79 mm length and 62mm breadth weighing not less than 600 gms 183 Providing and fixing CP brass towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 400 gms. 184 Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 500 gms 185 Providing and fixing CP brass towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 600 gms. 186 Providing and fixing CP brass towel rod with total length of 600 mm 150 mm vide, weighing not less than 300 gms omplete in all respect as per direction of En. In-Charge. 187 Providing and fixing white vitreous china battery based infrared sensor operated urinal of Jaquar Make ( urinal Item code URS-WHT-13255 andsensor flushing valve item code SNR-CHR-51097) of approved size & shape having pre & post flushing with water, having water inlet from back side, including fixing to wall with suitable brackets and CP brass waste coupling all as per manufacturers specification and direction of Engineer-in-charge. 188 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 189 Providing and fixing Extended Wall Mounted water closet of Jaquar make (Cat. No.: S1013143CADMUS) or equivalentwith PP Soft Closing Seat Cover, Hinges, Accessories and Fixing Accessories Set and Cistern with Lid and fittings Size: 375 x 660 x 760mm and Cistern with cistern fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction of En. In-Charge. 190 Providing and fixing Central Hole Basin Mixer of Jaguar make (cat. No.: QQT-7167B) or equivalent with Regular Spout without Popup Waste System with 450mm Long Braided Hoses complete in all respect as per direction of En. In-Charge. 191 Providing and fixing liquid soap Dispenser (Jaguar ACN-1135N Soap Dispenser with Glass Bottle or equivalent) with snap fittings of approved quality and colour and complete in all respect as per direction of En. In-Charge. 192 Providing and fixing Sensor based Faucet for wash basin (Jaguar make code: SNR-CHR-51021) complete in all respect as per direction of En. In-Charge. 193 Providing and fixing hand Shower multi flow (Make Jaquar item code: HSN-CHR-5541) complete in all respect as per direction of En. In-Charge. 194 Providing and fixing LED overhead shower (Make Jaquar item code: OHS-CHR-1743) complete in all respect as per direction of En. In-Charge. 195 Providing and fixing overhead shower (Make Jaquar item code: OHS-CHR-35497) complete in all respect as per direction of En. In-Charge. 196 Providing and fixing 15 mm nominal bore C.P. brass 2 way angle valve for hand shower & connection pipe of approved quality conforming to IS:8931 197 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes 198 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes 199 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 32 mm nominal dia Pipes 200 Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete. 25 to 40 mm nominal bore 201 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm dia nominal bore 202 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm dia nominal bore 203 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm dia nominal bore 204 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:25 mm dia nominal bore 205 Providing and fixing uplasticised PVCconnection pipe with brass unions:30 cm length 15 mm nominal bore 206 Providing and fixing uplasticised PVCconnection pipe with brass unions:45 cm length 15 mm nominal bore 207 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter 208 Providing flanged joints to double flanged C.I./ D.I. pipes and specials, including testing of joints : 100 mm diameter pipe 209 Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paidseparately) : 100 mm diameter. Class I 210 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 15 mm nominal dia Pipes 211 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 20 mm nominal dia Pipes 212 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 25 mm dia nominal bore 213 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 32 mm dia nominal bore 214 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 40 mm nominal dia Pipes 215 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 50 mm dia nominal bore 216 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 65 mm dia nominal bore 217 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 80 mm dia nominal bore 218 Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : 100 mm dia nominal bore 219 Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required : 100 mm dia nominal bore 220 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore 221 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore 222 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 223 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore 224 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge 225 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 30cm length 226 Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45cm length 227 Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay F.P.S. (non modular) bricks 228 Cutting holes up to 100 mm dia & 150 mm deeep in RCC floors/roofs/walls by machanical machine or mannual mean and fixing 50 mm dia MS pipes for create dewatering system from ducts but covered with RCC slab to passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. 229 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 230 Taking out existing damaged & loosed Aluminium shutters of door, window, ventilators & partitions and repair & replacement by opening all joints, closing all joints of Aluminium & glass with SS scrues & EPDM rubber / neoprene gasket, Al cleats etc. and refixing of repaired Al door shutters to existing door frames, including replacement of all SS scrues etc as required, all complete as per direction of the Engineer incharge. Door, window/ventilator shuuter of area up to 2.50 Sqm. 231 Providing and fixing fully invisible & waterproof crystal window privacy glass film on existing glasses of Aluminium shutters of door & windowsetc. complete as per directions of engineer in-charge. 232 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 233 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness 234 Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width 235 Providing and fixing stainless steel (SS 304 grade) adjustable friction windows stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer in-charge complete. 255 X 19 mm 236 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 237 Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.Polyester powder coated minimum thickness 50 micron aluminium 238 Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in charge. Polyester powder coated minimum thickness 50 micron aluminium 239 Providing and fixing Powder coated minimum thickness 50 micron aluminium tower bolts, ISI marked,transparent or dyed to required colour or shade, with necessary screws etc.complete : 250x10 mm 240 Providing and fixing Powder coated minimum thickness 50 micron aluminium tower bolts, ISI marked,transparent or dyed to required colour or shade, with necessary screws etc.complete :200x10 mm 241 Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand andmanufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor springtype fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete asper direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). 242 Providing and fixing Stainless Steel tubular handle bar 25 mm outer dia. & 300 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. 243 Grading roof for water proofing treatment with Cement mortar 1:4 (1cement : 4 coarse sand) 244 Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. 245 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed in position with M.S hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge.(M.S hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/ window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Frame size 50 x 125 mm 246 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately). 30 mm thick 247 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch (Make ABB) 248 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 Amp Switch (Make ABB) 249 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 Pin 5/6 amp socket outlet (Make ABB) 250 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 Pin 15/16 amp socket outlet (Make ABB) 251 Supplying and fixing suitable size 18 watt& 250 mm dia false ceiling light after cutting hole on ceiling with completeelectric fitting at any height and connecting wire to existing point on as required by Engineer Incharge. (Make- Phillips/ Havells / Jaquar / Lighting Technology) 252 Taking out existing ceiling fan and refixing with 600 mm long MS pipe after cutting hole on ceiling with completeelectric fitting at any height and connecting wire to existing point on as required by Engineer Incharge. 253 Taking out existing smoke deductor (roof bottom) and refixing on false ceiling after cutting hole on ceiling with completeelectric fitting at any height and connecting wire to existing point on as required by Engineer Incharge. 254 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. GroupC 255 Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessedsteel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 256 Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessedsteel conduit along with 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 257 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessedsteel conduit as required. 2 X 1.5 sqmm + 1 X 1.5 sqmm earth wire 258 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 4 Module (125 mm X 75 mm) 259 Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required. 6 Module (200 mm X 75 mm) 260 Supplying an fixing following modular base & cover plate on existing modular metal boxes etc as required. 8 Module 261 Supplying an fixing following modular base & cover plate on existing modular metal boxes etc as required. 6 Module 262 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 263 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

BRR:7479001 Trimming of Tree Branches, Cutting of Dead Trees, and Removal of Vegetation and Bushes Along the Mumbai Monorail Alignment and Depot Premises

BRR:7478162 Bids Are Invited For Self-Aligning Ball Bearing; Bearing Designation Number: 2314; Make: Skf - Fag - Ntn; For Power R , Angular Contact Ball Bearing, Bearing Designation - Number: Angular Contact Ball Bearing,Bearing Designation - Number: Total Quantity : 24

BRR:7477755 Bids Are Invited For Facility Management Services - LumpSum Based - Residential; Trimming of tree branches and bushes; Consumables to be provided by service provider (inclusive in contract cost) Total Quantity :

BRR:7498751 Bids Are Invited For Non Sparking Tools Kit As Per Is 4595 (Q3) Total Quantity : 1

BRR:7498613 Bids Are Invited For Pu Pipe And Other Spares For Frl Fittings Tm7201402030 , Tm7201403010 , Tm7201403028 , Tm7201402048 , Tm7201402056 , Tm7201402064 , Tm7201402072 , Tm7201402099 , Tm7201402081 Frl Brass Nipple 1-2 Male Thread For Connecting To Frl And To 8 Mm Pu Pipe With Locking Arrangement., Pu Tube 8 Id X 12 Od Mm, Working Pressure 135 Psi And Burst Pressure 400 Psi As Per Din 53504- Iso 14743 For Use With Pneumatic Power Tools. The Same Is To Be Printed On Pipe Body., Pu Spiral Coil Od = 12 Mm, Id = 8 Mm, Length = 10 Meters Each, Working Pressure 135 Psi And Burst Pressure 400 Psi As Per Din 53504- Iso 14743 For Use With Pneumatic Power Tools. The Same Is To Be , Cutting Tools Total Quantity : 665

BRR:7494742 Bids Are Invited For Rh Boring Bar With Carbide Shank Entry Dia(5.00 To 6.00 Mm) , Wl-25 Mm, Oal-120 Mm, Sd-8 Mm Rh Boring Bar With Carbide Shank Entry Dia(5.00 To 6.00 Mm) ,Wl-25 Mm,Oal-120 Mm,Sd-8 Mm,Part No.- , Cutting Tools Total Quantity : 1

BRR:7493687 Bids Are Invited For Sow Ingot Skimming Tool , Cutting Tools Total Quantity : 120

BRR:7492421 Bids Are Invited For Misc Items Torque Wrench 100 To 350 Nm , Heavy Duty Socket Set , T Handle Socket Set 10Mm To 17Mm , Allen Key Long Size Shape As Per Design , Stud Remover , Heavy Duty Adjustable C Type Spanner , Impact Screw Driver , Drive Impact Bolt Remover 1 By 4 Inch To 3 By 8 Inch 13 Pc Maxi , Tap 10 Into 1 Point 5 , Die 10 Into 1 Point 5 , Allen Key Comlete Socket Set , Screw Extractors Set , 23 Piece Metric Full Polish Long Combination Spanner Set , Slotting Cutter 6 Into 4 Point 0 Mm Into 1 Inch Torque Wrench 100-350Nm, Heavy Duty Socket Set, T Handle Socket Set 10Mm-17Mm, Allen Key Long Size Shape As Per Design, Stud Remover, Heavy Duty Adjustable C , Allen Key Total Quantity : 37

BRR:7492216 Bids Are Invited For 6 Mm Round Grooving Insert For Radial Grooving Solution Kit , 6 Mm Flat Grooving Insert For Radial Grooving Solution Kit , Cutting Tools Total Quantity : 1000

BRR:7488265 Bids Are Invited For Lv7t-815 (4X4) , 131-600-050-000, Hydraulic Cylinder (Hydraulic System Complete) , Hydraulic Puller Total Quantity : 32

BRR:7497442 Bids Are Invited For Rust Remover , Soldering Wire , Tape Insulation , Taflon Tape , Flux Soldering Paste , Rust Remover Solution Total Quantity : 100

BRR:7494846 Bids Are Invited For 1 DELIVERY VALVE COMPLETE 2 GASKET 3 LAMELLAR VALVE 3RD STAGE 4 PRESSURE WASHER FLYWHEEL 5 SWITCH 6 STUD 7 SUCTION VALVE COMPLETE 8 VALVE CAGE ZB 9 GASKET 10 CYLINDER HEAD PACKING 3RD STAGE 11 ROLLER BEARING 12 BEARING CENTRE 13 DISCHARGE VALVE III STAGE 14 GASKET CU A52 X 60 DIN 7603 15 RING OIL SCRAPER 195 X 180 X 8 16 COIL 17 CYLINDER LINER STAGE II 18 CYLINDER HEAD COMPLETE 19 RING SEALING 20 CYLINDER LINER STAGE I 21 PACKING RING 22 GASKET 23 SIGHT GLASS FLOW INSPECT 24 DELIVERY VALVE COMPLETE 25 SUCTION VALVE COMPLETE 26 SEALING SET FOR SOLENOID VALVE 27 PISTON I/III 28 GASKET A10 X 16 29 WASHER 30 PACKING 31 MOTOR CIRCUIT BREAKER 32 DELIVERY VALVE COMPLETE 33 RESILIENT MOUNT 34 CYLINDER HEAD PACKING 1ST STAGE 35 GASKET 36 SHAFT SEAL 37 O RING 20X35X2.5 38 GASKET 39 CRANK SHAFT BEARING 40 GASKET A16 X 22 41 GASKET 42 SCREW PLUG R 1 2 (LOCKING BOLT) 43 STUD 44 ANODE SACRIFICIAL ZINK 45 GASKET A45 X 52 DIN 7603 46 RING PISTON IV 28/25 0 X 3 L.H. 47 SUCTION VALVE III STAGE 48 MAGNETIC STRAIGHT WAY 49 GASKET 50 CYLINDER LINER STAGE III 51 GASKET 52 FILTER INSERT 53 GASKET A32 X 40 DIN 7603 54 CUTTING RING Total Quantity : 288

BRR:7491419 Tender For Annual Maintenance Of Electric Department For Year 2025-26 - Supplying anderecting HMS PVC conduitFRLS grade 20 mm dia. with PVC accessorieson wall / ceiling as per specification No: WG-MA/CON. 3 Supplying and erecting HMS PVC conduit FRLS grade25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON. 4 Supplying and erecting HMS PVC conduit FRLS grade 32 mm dia. with PVC accessorieson wall / ceiling as per specification No: WG-MA/CON. 5 Supplying anderectingPVCtrunking (PVC casing-n-capping)ofsize20 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 6 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize25 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 7 Supplying anderectingPVCtrunking (PVCcasing-n-capping)ofsize32 mm with accessorieson wall/ceiling as per specification No: WG-MA/CON. 8 Supplying and erecting mains with 2x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 9 Supplying and erecting mains with 1x1.5 sq.mm FRLSHcopperPVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 10 Supplying and erecting mains with 2x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 11 Supplying and erecting mains with 1x2.5 sq.mmFRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 12 Supplying and erecting mains with 2x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 13 Supplying and erecting mains with 1x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 14 Supplying and erecting mains with 2x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places. as per specification No: WG-MA/BW 15 Supplying and erecting mains with 2x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 16 Supplying and erecting mains with 3x2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 17 Supplying and erecting mains with 3x4 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 18 Supplying and erecting mains with 3x6 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 19 Supplying and erecting mains with 3x10 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 20 Supplying and erecting mains with 4x16 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 21 Supplying and erecting mains with 4x25 sq.mm FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW 22 Supplying and erecting PVC insulated PVC round sheathed 1.5 sq.mm (30 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV 23 Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no. x 0.25 mm dia.) 3 core flexible multi strandedcopper Industrial cable for voltage grade up to 1.1 kV 24 Supplying and erecting mains with WP 2 x 2.5 sq. mm. 1100 V grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire. 25 Supplying and erecting mains with WP 2 x 4 sq. mm. 1100 V grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire. 26 Supplying and erecting mains with WP 2 x 6 sq. mm. 1100 V. grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire. 27 Supplying and erecting mains withWP 3 x 4 sq. mm. 1100 V. grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire. 28 Supplying and erecting mains withWP 3 x 6 sq. mm.1100 V. grade aluminium PVCinsulatedandPVC sheathed wires on G.I. bearer wire No. 8 SWG complete erectedwith required size ofporcelainreelinsulators and 16 SWG G.I. binding wire. 29 Supplying and erectingmodular type switch 6A / 10A duly erected on provided plate and box with wiring connections complete. 30 Supplying and erectingmodular type switch 16Aduly erected on provided plate and box with wiring connections complete. 31 Supplying and erectingmodular type bell-push 6A / 10A duly erected on provided plate and box with wiring connections complete. 32 Supplying and erectingmodular type bell-push with indicator 2 modules 6A / 10A, duly erected on provided plate and box with wiring connections complete. 33 Supplying and erecting modular type Two way switch 6A / 10A (2 Module),duly erected on provided plate and box with wiring connections complete. 34 Supplying and erectingmodular type switch 16 / 20 Awith indicator,duly erected on provided plate and box with wiring connections complete. 35 Supplying and erectingmodular type switch one way 16 / 20 A,duly erected on provided plate and box with wiring connections complete with neon indicator. 36 Supplying and erectingmodular type D.P. switch 32A with indicator, duly erected on provided plate and box with wiring connections complete. 37 Supplying and erectingmodular type 3 pin 6Amultisocket with safety shutter, duly erected on provided plate and box with wiring connections complete. 38 Supplying and erectingmodular type 3 pin 6 / 16Amultisocket with safety shutter,duly erected on provided plate and box with wiring connections complete. 39 Supplying and erectingmodular type (two module) electronic step regulator for fan, duly erected on provided plate and box with wiring connections complete. 40 Supplying and erecting PVC Surface modular switch box with double mounting plate for 1 module complete duly erected. 41 Supplying and erecting PVC Surface modular switch box with double mounting plate for 2module duly erected. 42 Supplying and erecting PVC Surface modular switch box with double mounting plate for 3module duly erected. 43 Supplying and erecting PVC Surface modular switch box with double mounting plate for 4 module duly erected. 44 Supplying and erecting PVC Surface modular switch box with double mounting plate for 6module duly erected. 45 Supplying and erecting PVC Surface modular switch box with double mounting & front plate for 8 module complete duly connected. 46 Supplying and erecting PVC Surface modular switch box with double mounting plate for 12module duly erected. 47 Supplying and erecting PVC Surface modular switch box with double mounting plate for 16 / 18 module duly erected. 48 Supplying and erectingmodular pop up Box 8 module erected with providedAV/ HDMI , RJ 45,6 A electricalsockets and switch on provided table. 49 Point wiring for ceiling fan in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthingand required accessories as per specification No: WG-PW/SW 50 Point wiring for independent plug in PVC trunking (casing-capping) with 1.5 sq.mm(2+1E) FRLSH grade copper wire, modular type switch,earthing and required accessories as per specification No: WG-PW/SW 51 Wiring for plug on board withSwitch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG-PW/CW 52 Supplying and erectingLED square / circular Max. 18 W down lighter/ Panel Light having pressure die-cast aluminium housing,polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50, including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 53 Supplying and erectingrectangular shaped LEDPanel Light(1200mm X 300mm) Max. 35 Whaving CRCA powder coated housing,polystyrene diffuser havingsystem lumens output of Min. 4200 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50,including driver,having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. 54 Supplying and erectingbulk head LED fittingmax. 10Wwith high transitivity diffuser withsystem lumens output of min. 1100 lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg.,THD<10%,p.f. >0.95, operating range of140-260V, in built surge protection of 2.5 kV, Life class of50,000 Hrs. at L70B50, including driver, IP66, IK09 rated on provided PVC Block / wooden board with 3 years warranty. 55 Supplying and erecting CRCA powder coated corridor/passage light LED fitting (4 feet) Max. 17Wwith high transitivity diffuser withsystem lumens output of Min. 2000 lumens , min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%,p.f. >0.95, operating range of120-270V, surge protection of 4 kV, Life class of50,000 Hrs. at L70B50, includingdriver, with end caps on provided PVC Block / wooden board with 3 years warranty. 56 Supplying and erecting anodized aluminium corridor / passage light LED fitting (4 feet) Max. 22Wwith high transitivity diffuser withsystem lumens output ofMin.2200 lumens , min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%,THD<10%,p.f. >0.95, operating range of200-270V, surge protection of 2 kV, Life class of 50,000 Hrs. at L70B50, including driver, with end caps on provided PVC Block / wooden board with 3 years warranty. 57 Supplying and erecting condenser 4 microfarad for fluo. Fitting as per specification no FG-FG/AS7. 58 Supplying and erecting integrated LED street light fitting18 to 22W IP65 & IK08 class having single piece pressure die-cast aluminium housing,having system lumens output of Min. 1800 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 59 Supplying and erecting integrated LED street light fitting 23 to 25W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 2300 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3Years warranty as per specification NoFG-ODF/FLS2. 60 Supplying and erecting integrated LED street light fitting26 to 30W IP65 & IK08 class having single piece pressure die-cast aluminium housing ,having system lumens output of Min. 2600 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50,including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 61 Supplying and erecting integrated LED street light fitting 40 to 50W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 4400 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 62 Supplying and erecting integrated LED street light fitting 60W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 6600 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 63 Supplying and erecting integrated LED street light fitting 70-75W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 7700 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50,including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 64 Supplying and erecting integrated LED street light fitting 85-90W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 9300 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 65 Supplying and erecting integratedLED street light fitting 100-110W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 11000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50,including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 66 Supplying and erecting integrated LED street light fitting 120W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 13000 Lumens, min. efficacy of 110 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 67 Supplying and erecting integrated LED street light fitting 130-140W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 15600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50, including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 68 Supplying and erecting integrated LED street light fitting 160-170W IP65 & IK08 class having single piece pressure die-cast aluminium housing,havingsystem lumens output of Min. 19000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K,THD<10%, p.f. >0.95, operating range of140-270V, inbuilt surge protection of 10 kV, Life class of 50,000 Hrs. at L70B50,including driver complete with 3 Years warranty as per specification NoFG-ODF/FLS2. 69 Supplying and erecting integrated LED flood light fitting Max. 30W IP65 & IK07 class having pressure die-cast aluminium housing,havingsystem lumens output of Min. 3000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50, including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 70 Supplying and erecting integrated LED flood light fitting Max. 50W IP65 & IK07 class having pressure die-cast aluminium housing,havingsystem lumens output of Min. 5000 Lumens, min. efficacy of 100 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50,including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 71 Supplying and erecting integrated LED flood light fitting Max. 70W IP65 & IK07 class having pressure die-cast aluminium housing,having system lumens output of Min. 8400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50,including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 72 Supplying and erecting integrated LED flood light fitting Max. 100W IP65 & IK07 class having pressure die-cast aluminium housing,having system lumens output of Min. 12000 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50,including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 73 Supplying and erecting integrated LED flood light fitting Max. 120W IP65 & IK07 class having pressure die-cast aluminium housing,havingsystem lumens output of Min.14500 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50,including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 74 Supplying and erecting integrated LED flood light fitting Max. 155W IP65 & IK07 class having pressure die-cast aluminium housing,having system lumens output of Min. 18600 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50,including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 75 Supplying and erecting integrated LED flood light fitting Max. 195W IP65 & IK07 class having pressure die-cast aluminium housing,havingsystem lumens output of Min. 23400 Lumens, min. efficacy of 120 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-270V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L70B50,including driver with U shaped bracket with 3 Years warranty as per specification NoFG-ODF/FLS2. 76 Supplying and erecting integrated LED Post Top45W IP65 & IK10 class having die cast aluminium housing with UV protected polycarbonate diffuser,having system lumens output of Min.4500 Lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 2 kV, Life class of 30,000 Hrs. at L50B50 , including driver complete with 2 Year warranty as per specification NoFG-ODF/FLS2. 77 Supplying and erecting Gate/garden light fitting with 200mm dia. glass bowl suitable for upto 12W LED Lampon provided pipe as per specification No. FG-ODF/GLT 78 Supplying and erecting Gate/garden light fitting with 300mm dia. glass bowl suitable for upto 12W LED Lamp on provided pipe as per specification No. FG-ODF/GLT 79 Supplying & erecting integral post top lantern fixtures (mushroom type) suitable for LED lamp upto 12 W consisting of clear acrylic top cover, cast aluminium pole cap complete with accessories on provided pole /bracket as per specification no. FG-ODF/PTL 80 Supplying & erecting integral post top lantern fixtures (globe type) suitable for LED lamp upto 12 W consisting of aesthetic round clear acrylic top cover, cast aluminium pole cap on provided pole /bracket as per specification no. FG-ODF/PTL 81 Supplying & erecting integral post top lantern fixtures (light house type) suitable upto LED 18 W Lamp consisting of combination of spun aluminium canopy & clear acrylic top cover, cast aluminium pole cap on provided pole/ bracket as per specification no. FG-ODF/PTL 82 Supplying and erecting integrated LED Highbay Fitting70W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics,having system lumens output of Min.10000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification NoFG-ODF/FLS2. 83 Supplying and erecting integrated LED Highbay Fitting100W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics,having system lumens output of Min. 15000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 4 kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification NoFG-ODF/FLS2. 84 Supplying and erecting integrated LED Highbay Fitting135W IP65 & IK08 class having die cast aluminium housing with polycarbonate diffuser with integrated optics,havingsystem lumens output of Min. 20000 Lumens, min. efficacy of 145 lumen/W, CRI>70, CCT upto 6500K, THD<10%, p.f. >0.90, operating range of140-240V, inbuilt surge protection of 4kV, Life class of 50,000 Hrs. at L50B50 , including driver complete with 3 Year warranty as per specification NoFG-ODF/FLS2. 85 Supplying and erecting Street light bracket made from 25 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC 86 Supplying and erecting Street light bracket made from 40 mm. dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads as per specification no. FG-BKT/BPC 87 Supplying and erecting street light Wall bracket made from 25 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB 88 Supplying and erecting street light Wall bracket made from 40 mm. dia ‘ G.I. pipe 1.2 m. in total length complete as per specification no. FG-BKT/WB 89 Supplying and erecting Street light bracket for erection of Single fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC 90 Supplying and erecting Street light bracket for erection of Double fitting made from 40 mm. dia ‘B’ class G.I. pipe 1.0 m. in length along with pole cap of 300 mm length 100 mm dia duly welded as per specification no. FG-BKT/BPC 91 Supplying and erecting Street light bracket for erection of Single fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC 92 Supplying and erecting Street light bracket for erection of Double fitting on tubular welded pole with 40 mm. dia 1.0 m. length “B” class G.I .pipe along with pole cap of 125mm dia 600 mm long duly welded as per specification no. FG-BKT/BPC 93 Supplying and erecting Control gear 1x250W for HPSV/MH lamp with all accessories for NON Integral Flood light fittings suitable for complete 94 Supplying and erecting Control gear for NON Integral Flood light fittings suitable for 1x400W HPSV/MH lamp with all accessories complete. 95 Supplying and erecting Control gear for NON Integral Flood lightfittings suitable for 2x250W HPSV/MH lamp with all accessories complete. 96 Supplying and erecting Control gear for NON Integral Flood light fittings suitable for2x400W HPSV/MH lamp with all accessories complete. 97 Supplying and erecting electronic type Driver for Outdoor LED Fittingsupto 25W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 98 Supplying and erecting electronic type Driver for Outdoor LED Fittings 26W-45W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 99 Supplying and erecting electronic type Driver for Outdoor LED Fittings 46W-75W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 100 Supplying and erecting electronic type Driver for Outdoor LED Fittings 76W-100W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 101 Supplying and erecting electronic type Driver for Outdoor LED Fittings 101W-150W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 102 Supplying and erecting electronic type Driver for Outdoor LED Fittings151W-200W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 103 Supplying & erecting 0.5W, 230V integral type LED Lamp suitable for B-22/E-27 base. 104 Supplying and erecting Pigmy /candle lamp miniature type coloured / white. 105 Supplying & erecting 3W, 230V integral type LED Lamp suitable for B-22 / E-27 base. 106 Supplying & erecting 5W-7W, 230V integral type LED Lamp suitable for B-22 / E-27 base. 107 Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22 / E-27 base. 108 Supplying & erecting 14W, 230V integral type LED Lamp suitable for B-22 / E-27 base. 109 Supplying & erecting18W, 230V integral type LED Lamp suitable for B-22 / E-27 base. 110 Supplying and erecting bracket fan 400 mm. sweep A. C. 230 volts 50 cycles 1350 RPM. Oscillating type, plastic or metal blades chrome plated guard with speed regulator and moisture proof treatment to winding and with ‘E’ class insulation. 111 Supplying and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPMwithoutspeedregulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation. 112 Supplying pedestal type air circulator 450 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM with speed regulator, metallic blades, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 meter length and hand shield type 3 pin 5A. plug top complete with moisture proof treatment and ‘E’ class insulation. 113 Supplying pedestal type air circulator 600 mm. sweep oscillating type suitable to work on 230 Volts 50 cycles 1440 RPM without speed regulator, metallic blades, overhead protection unit, totally enclosed, flame proof motor with additional 3 core wire, 5 meter length and hand shield type 3 pin6A. plug top complete with moisture proof treatment and ‘E’ class insulation. 114 Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation. 115 Supplying and erectingenergy saving ceiling fan 230 V A.C. 50 cycles 1200 mm complete erected in position as per specification no. FG-FN/CF 116 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, max. energy consumption of28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control/compatible speed regulator, Temperature Rise of Max. 40 deg. C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF 117 Supplying and erecting condenser 2.5 micro farad for ceiling fan 118 Erection ofdepartmentallysupplied ceiling fan with necessary materials complete. 119 Erectionofdepartmentallysupplied exhaust fan with necessary materials complete. 120 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 12mm complete. 121 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigeranthaving 22SWG thickness and inner dia/size 16mm complete. 122 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 22mm complete. 123 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 32mm complete. 124 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 35mm complete. 125 Supplying & erecting seamless outside & inside, smooth, dry and clean copper pipe with ROHS compliant suitable for refrigerant having 22SWG thickness and inner dia/size 42mm complete. 126 Supplying and erecting 12V/130Ah to 135Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. 127 Supplying and erecting 12V/150Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete. 128 Supplying and erecting 12V/180Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete 129 Supplying and erecting 12V/200Ah tubular battery with battery terminal wire, duly charged with 36 months warranty complete 130 Providingservicing of 1/1.5/2/3 TR capacity split/window air conditioning unit with all necessary material. job includes checking of performance of unit, cleaning of filters of indoor unit, cleaning of outdoor unit with blower, checking of electrical connection of indoor as well as outdoor unit complete and submitting report to Engineer incharge. 131 Providing annual comprehensive maintenance contract for 1 TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job excludes sheet metal work and plastic material. 132 Providing annual comprehensive maintenance contract for 1.5TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. 133 Providing annual comprehensive maintenance contract for 2TR split/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material. 134 Providing annual comprehensive maintenance contract for 3TR to 4.5TRsplit/tower/window air conditioning unit complete as per terms and conditions. Job includes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work and plastic material 135 Providing replacement of existing unserviceable rotary/scroll compressor of air conditioner 1TRby new one of same capacity with guarantee for one year with provided refrigerant complete. 136 Providing replacement of existing unserviceable rotary/scroll compressor of air conditioner 1.5TR by new one of same capacitywith guarantee for one year with provided refrigerant complete. 137 Providing replacement of existing unserviceable rotary/scroll compressor of air conditioner 2TR by new one of same capacitywith guarantee for one year with provided refrigerant complete. 138 Providing replacement of existing unserviceable rotary/scroll compressor of air conditioner 2.5TR to 4.5TR by new one of same capacitywith guarantee for one year with provided refrigerant complete. 139 Providing flushing out cooling coil and condenser coil of airconditioner unit refrigerant pipes internally with dry Nitrogen pressure, complete. 140 Providing brazing pipes and checking leakages in the split/window unit duly with dry nitrogen pressure, complete. 141 Providing replacement of unserviceable starting relay for AC unit. 142 Providing replacement of unserviceable starting capacitor for AC unit. 143 Providing replacement of unserviceable running capacitor for AC unit. 144 Providing replacement of unserviceable fan motor capacitor for AC unit. 145 Providing replacement of unserviceable PCB for AC unit upto 3TR capacity. 146 Providing repair of faulty PCB for AC unit upto 3TR capacity. 147 Supplying and installing of new fan motor for condenser for air conditioning unit 148 Supplying and installing of new fan motor for indoor unit of air conditioner up to 3TRsuitable to operate on 230/250V,A.C. or 280-340V DC supply having 4 to 8 poles as per requirement. 149 Supplying and installing new fan blade outdoor unit for AC unit. 150 Providing replacement of blower of indoor unit for AC unit. 151 Providing replacement of remote of indoor unit for AC unit. 152 Providing vaccumising the airconditioner system and charging with refrigerant R32 for AC unit. 153 Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 for AC unit. 154 Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 for 1TR window/split AC unit. 155 Providing vaccumising the airconditioner system to 200 micron and charging with R32 refrigerant for 1.5TR window/split AC unit. 156 Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 for 2TR window/split AC unit. 157 Providing vaccumising the airconditioner system to 200 micron and charging with refrigerant R32 refrigerantfor 3TR window/split AC unit. 158 Providing replacement of existingunserviceablecompressor of 40 litre cooling capacity water cooler by new one of same capacity along with suitable refrigerant with guarantee for one year. 159 Providing replacement of existingunserviceablecompressor of 60 litre cooling capacity water cooler by new one of same capacity along with suitable refrigerant with guarantee for one year. 160 Providing replacement of existing unserviceable compressor of 150 litre cooling capacity water cooler by new one of same capacity along with suitable refrigerant with guarantee for one year. 161 Providing replacement of existingunserviceable condenser coil of 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and along with guarantee for one year with suitable refrigerant. 162 Providing replacement of existing unserviceable SS water tap of 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and along with guarantee for one year with suitable refrigerant. 163 Providing replacement of existingunserviceable relay40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and along with guarantee for one year with suitable refrigerant. 164 Providing replacement of existingunserviceablethermostat of 40/80/150 litre cooling capacity water cooler by new one of same capacity, testing to the satisfaction of site engineer for cooling and along with guarantee for one year with suitable refrigerant. 165 Supplying and erecting candle filter with filter pot for water cooler. 166 Supplying and erecting connector pipe for candle filter of water cooler. 167 Providing replacement of base tray of water cooler of any capacity. 168 Supplying and erecting quartz electronic timeswitchhaving 24 hour dial to work on 250 V 50 cycle AC having built in rechargeablenickel cadmium batteries to run the time switch on failure of supply having switch contact rating up to 16A to use independently or in conjunction with contactor. 169 Supplying and erecting two pole power contactor 230 V, 32 A for time switch complete erected on provided wooden block/ box, with necessary materials. 170 Supplying and erectingfour pole power contactor 430 V, 16 Afor time switch complete erected on provided wooden block/ box, with necessary materials. 171 Supplying and erectingfour pole power contactor 430 V, 40 Afor time switch complete erected on provided wooden block/ box, with necessary materials. 172 Supplying and erecting programmable digital almanac timer microcontroller based with real time clock to operate on derived switching “ON” and switching “OFF” street light asper dailysunset and sunrise respectively automatically having 4digitLEDcontinuous time display, relay output 230 V / 10A with 10 hrs. battery backup and manual over drive facility capable to drive different capacity contactors timer erected in provided M.S. box. 173 Supplying &erecting four poleON LOAD changeover switch, 415V,100A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. 174 Supplying &erecting four poleON LOAD changeover switch, 415V, 200A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. 175 Supplying &erecting four poleON LOAD changeover switch, 415V, 315-320A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. 176 Supplying &erecting four poleON LOAD changeover switch, 415V, 400A, open execution having staggered termination, phase barrier, shroud termination and terminal cover along with auxiliary contacts and ready to upgrade with fuse protection kit,rotary handle, operational current category AC23A complying to IS/IEC 60947-3 Part-1/3. 177 Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 100-125A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging,connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 . 178 Supplying and erecting ON LOAD four pole automatic transfer switch, 415V, 200A, 50 Hz with enclosure, flexibility of neutral connection, line and load reversibility, changeover with phase barriers, source separator, terminal covers along with staggered termination for cable connection and ATS controller with provision of time delay protection of OV, UV, phase sequence changing, single phasing and event logging,connected with provided leads complete complying to IS/IEC 60947-3 Part-1/6 . 179 Supplying, erecting & marking SPMCB 0.5A to 5A, C-series with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB 180 Supplying, erecting & marking SPMCB 6A to 32A, C-serieswith rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 181 Supplying, erecting & marking SPMCB 6A to 32A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 182 Supplying, erecting & marking SPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 183 Supplying, erecting & marking SPMCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 184 Supplying, erecting & marking DPMCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 185 Supplying, erecting & marking DPMCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 186 Supplying, erecting & marking DPMCB 40A to 63A, C-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 187 Supplying, erecting & marking DPMCB 40A to 63A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 188 Supplying, erecting & marking TPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 189 Supplying, erecting & marking TPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 190 Supplying, erecting & marking FPMCB 6A to 32A, with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR/MCB 191 Supplying, erecting & marking FPMCB 40A to 63A, with rated short - circuit breaking capacity (Icn) 10kAin provided distribution board as per specification no. SW-SWR/MCB 192 Supplying, erectingand marking double pole isolator only switch version of miniature circuit breakerof40Awith required wiring connections and lugs etc. in provided distribution board. 193 Supplying, erectingand marking triplepoleisolatorsonlyswitch versionofminiaturecircuitbreaker of 40A with required wiring connections and lugs etc. in provided distribution board. 194 Supplying, erecting and markingtriple pole isolators only switch version of miniature circuit breaker of 63Awith required wiring connections and lugs etc. in provided distribution board. 195 Supplying, erecting and markingtriple pole isolators only switch version of miniature circuit breaker of 100Awith required wiring connections and lugs etc. in provided distribution board. 196 Supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 40A in provided distribution board. 197 Supplying, erecting and markingfour pole isolators only switch version of miniature circuit breakers of 63Ain provided distribution board. 198 Supplying, fixing and commissioning MCB type change over switch 4 pole, 40A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS 199 Supplying, fixing and commissioning MCB type change over switch 4 pole, 63A with 3 positions (I-O-II) with centre off position as per specification no. SW-SWR / MCBCOS 200 Supplyingand erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 2 ways (2 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB 201 Supplyingand erecting single pole and neutral distributionboard (SPNDB), with 2 ways for incoming and 6 ways (6 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface / flush mounted, IP 43 Protection on iron / GI frame as per specification no. SW-SWR/MCBDB 202 Supplying & erecting CRCA sheet metal enclosures of 1.2mm thickness with 20A, 2 pin plug & earth socket and 20A, 3 pin plugtop with 20A/30A single pole MCB having rated short - circuit breaking capacity (Icn) 10kA complete erected on angle iron/ GI frame. 203 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thickness suitable for DP MCB /TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 204 Providing & erecting 4 Pole MCCB, 415 V, 100A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact.MCCB with phase barriers on both sides, insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 205 Providing & erecting 3 Pole MCCB, 415V, 200A, rated short-circuit breaking capacity 25 kA (Ics=100% of Icu), adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 206 Providing & erecting 3 Pole MCCB 415V, 250A, rated short-circuit breaking capacity 36 kA (Ics=100% of Icu) adjustable thermal (overload) setting and adjustable magnetic setting with provided leads, provision for installation of shunt/UV/trip alarm contact and MCCB should have phase barriers both sides, with insulation withstand capacity 800V, no line-load bias in provided enclosure/panel as per specification no. SW-SWR/MCCB 207 Supplying, erecting & commissioning 2 pole RCCB 63A, electromagnetictype with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB/RCCB 208 Supplying, erecting & commissioning 4 pole RCCB 63A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication completeas per specification no. SW-RCCB/RCCB 209 Providing, erecting & commissioning 4 pole RCCB 40A, with added immunity to avoid DC pulse tripping with 30/100/300 mA sensitivity complete as per specification no. SW-RCCB/RCCB 210 Providing, erecting & commissioning 4 pole RCCB 63A, with added immunity to avoid DC pulse tripping with 30/100/300 mA sensitivitycomplete as per specification no. SW-RCCB/RCCB 211 Providing, erecting& commissioning 4 pole RCCB 100A, with added immunityto avoid DC pulse tripping with 30/100/300 mA sensitivitycompleteas per specification no. SW-RCCB/RCCB 212 Supplying and erecting porcelain base iron clad cut out HC type 415V, 16A erected on polished wooden block. 213 Supplying and erecting porcelain base iron clad cut out HC type 415V, 32Aerected on polished wooden block. 214 Supplying and erecting porcelain base iron clad cut out HC type 415V, 63Aerected on polished wooden block. 215 Supplying and erecting porcelain base iron clad cut out HC type 415V, 100Aerected on polished wooden block. 216 Supplying and erecting porcelain base iron clad cut out HC type 415V, 200A erected on polished wooden block. 217 Supplyinganderectingiron work, sheet metal work consisting of CRCAsheets, varioussectionsofiron,plates, chequeredplates,rods,bars,MSpipes,etc. forpanel board or any other purpose with bending, cutting, drilling and welding completeerectedatthepositionwith necessarymaterialsdulypaintedwith one coat of red oxide and two coats of enamelpaint to match the switchgears or as per directions by the authority. 218 Supplying and erecting metal work in CRCA sheet including Iron work for supportswith fabrication ofboxes,panelboards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment andduly powder coated or paintedwith one coat of red lead paint and 2 coats of enamel paint complete. 219 Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V, 100A having 15mm (Width) X 3 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade& Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint,with suitable number of ways andwith SMC/DMC Insulators and accessories of suitable ratingcomplete as per specification no. CP-BB 220 Supplying and erecting bus bar chamber triple pole with neutral with four aluminium bars, 500V 200A having 25mm (Width) X 5 mm (Thickness), with 99.9 % aluminium purity as per E91E Grade& Current Density 0.8 A per sq. mm. compliance to IS 5082 and Enclosure fabricated with 16 SWG CRCA sheet and epoxy paint,with suitable number of ways andwith SMC/DMC Insulators and accessories of suitable ratingcomplete as per specification no. CP-BB 221 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core25 sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 222 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core35sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 223 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core50 sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 224 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core70sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 225 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core95sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 226 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 3½ core120sq. mm. aluminiumconductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 227 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core4sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 228 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 229 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 230 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core16sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 231 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core25sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 232 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core35sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 233 Supplying, erecting & terminatingFR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 4 core 50sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 234 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wirearmoured (strip) cable 1100 V 2 core 4sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 235 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 6sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 236 Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable 1100 V, 2 core 10sq. mm. aluminium conductor completeerected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipeas per specification no. CB-LT/AL 237 Supplying & erecting G.I. pipe‘A’ class 50 mmdia.erectedfor enclosingXLPEarmouredcable on wall/poleas per specification no. CB-CE 238 Supplying andlaying (including excavation of suitable width & depth up to 90 cm) 50 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete. 239 Supplying andlaying (including excavation of suitable width & depth up to 90 cm) 90 mmoutside dia. double wall corrugatedpipes(DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete. 240 Supplying and laying (including excavation of suitable width & depth up to 90 cm) 120 mmoutside dia. double wall corrugatedpipes (DWC) ofHDPE for enclosing cable below ground/road surface, to required depth complete. 241 Supplying & erecting FRP box of size 250mm x 200mm x 100 mm, 2.7 mm thick complete on pole/wallas per specification No. CB-SB 242 Supplying & erecting crimping type copper lugs for cable up to 16 sq mm completeas per specification No. CB-CL/CU 243 Supplying & erecting crimping type aluminium lugs for cable up to 16 sq mm completeas per specification No. CB-CL/AL 244 Supplying & erecting crimping type aluminium lugs for cable25 sq mm completeas per specification No. CB-CL/AL 245 Supplying & erecting crimping type aluminium lugs for cable35 sq mm completeas per specification No. CB-CL/AL 246 Supplying & erecting crimping type aluminium lugs for cable50 sq mm completeas per specification No. CB-CL/AL 247 Supplying & erecting crimping type aluminium lugs for cable70 sq mm completeas per specification No. CB-CL/AL 248 Supplying & erecting crimping type aluminium lugs for cable95 sq mm completeas per specification No. CB-CL/AL 249 Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 250 Providing & erecting 7 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 251 Providing & erecting 8 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 135 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 252 Providing & erecting 9 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 155 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/OPL 253 Providing & erecting 11 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 210 mm A/F, top 90 mm A/F on provided foundation as per specification no. OH-PL/OPL 254 Providing and erecting galvanised 1000mm single arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT 255 Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/PBKT 256 Supplying and erecting 3 phase 5 core 16 sq.mm. (3x16+1x25+1x16) Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC 257 Supplying and erecting 3 phase 5 core 25 sq.mm.(3x25+1x25+1x16) Aerial bunched aluminium cable along with necessary accessories for LT distribution on provided LT pole as per specification no. OH-CBL/ABC 258 Supplying and erecting 12 Way AB cable distribution box on provided pole with necessary accessories as per specification no. OH-ABC/JBS 259 Providng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results asper specification no. EA-EP 260 Providingpipetype earthing with 40mm. dia. G.I. pipe or 20 mm dia. G.I. Rodcomplete with all materials testing and recording the results as per specification no. EA-EP 261 Supplying and erecting GI wire of high purity of required sizes used for earthing or any other purposes on wall with necessary G. I. Clamps fixed on wall/cable/ conduit with screws complete. 262 Carrying out Servicing of DG set from 62.5 kVA to 200 kVA with/without AMF Panel of any make to ensure smooth running of DG set for 30 mins Checking for abnormal sound and leakages, Carry out visual inspection of all moving parts, oil levels, oil filters, fuel filters, air filters and clean them properly, rectify the minor leakages if any. Inspect alternator, stator and rotor for normal speed & proper frequency, Examine battery charging with monitoring system and recording voltages, checking battery cells gravity and topping up with Distilled water,Checking V belts with necessary adjustment, Checking and retightening of nut bolts including coupling bolts of engine and alternator, Checking & cleaning of radiator and leakage testing Checking of radiator & fuel supply hose pipes, Checking of AVR, excitation diodes, its connections confirming proper output voltage. Checking & resetting of valve tappets, Cleaning of DG set internally using blower, cleaning radiator, Attending breakdowns as and when required during One month period or during VIP visit within 2 hours of intimation and Submit the servicing report to engineer in charge.(Non Comprehensive) as per specification No. GEN-SER-AMC 263 Supplying & erecting Fully Automatic Star/delta starter suitable for12.5 H.P to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron frame. 264 Supplying & erecting flat flexible 3 core 4 sq.mm PVC sheathed submersible type copper cable suitably clamped at fixed intervals with column pipe assembly complete. 265 Making trench in soft soil having 0.75 m depth and minimum0.3 m widthfor laying providedcables up to voltage level of 1.1kV complete As per specification No. CW-EXN-CTR 266 Making trench in Hard murum/Tar roadhaving 0.75 m depth and minimum0.3mtr width as per IS for laying provided cables up tovoltage level1.1Kv cable complete as per specification No. CW-EXN-CTR 267 PVC Insulation Tape 268 Supplying and erecting electronic type LED Strip for Outdoor LED Fittingsupto 25W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 269 Supplying and erecting electronic type LED Strip for Outdoor LED Fittings 26W-45W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 270 Supplying and erecting electronic type LED Strip for Outdoor LED Fittings 46W-75W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 271 Supplying and erecting electronic type LED Strip for Outdoor LED Fittings 76W-100W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 272 Supplying and erecting electronic type LED Strip for Outdoor LED Fittings 101W-150W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 273 Supplying and erecting electronic type LED Strip for Outdoor LED Fittings151W-200W suitable to operate on 230V A.C. 50 Hz. Having pf>0.95 and THD<10%. 274 SUPPLY ofman power - electrician/wireman ( technician/lineman)for fault finding ,street light maintenance, garden maintenance, office maitenance, new light installation/replacement , mini Highmast light maintenanace.installation and replacing of street phase and underground cable, street light point on off 275 Supply ofman power - ( helper) for light chekerand tohelp technician/lineman

BRR:7487378 Bids Are Invited For Supply Of Sight Flow Glass And Tw Gantry Supply At Lpg Plant Sight Flow Glass , Painting Of Pipeline , Structural Steel Painting , Providing And Applying 2 Coats Of White Wash , Structural Steel Works , Wooden Stopper , Sply Of Pressure Guages 0 To 25 Kg Range 4 Inch Glycrn Ss , Supply Of 4 Core 2.5 Sq Mm Copper Cable With Laying , Supply Of Metalic Gasket 2 Inch And 3 Inch , Supply Of Copper Jumper , Priming (V2) As Per Is 2074 Total Quantity : 11310

BRR:7483169 Bids Are Invited For Reflex Type Liquid Level Gauge, 3300X1805x994, Fo Day Tank , Reflex Type Liquid Level Gauge- 1050X1050x1750, Lo Tank , Top Mounted Magnetic Level,Indicator- 2200X2075x1397, Black Water Tank , Top Mounted Magnetic Level , Indicator- 2200X2075x1397, Black Water Tank , Rectangular Type Sight Glass-650Lx550wx600h, Machinery Cooling System , Rectangular Type Sight Glass- 650Lx550wx600h, Machinery Cooling System , Temperature Gauge-Temp. Range 0 To 80 Deg C, Working Pressure -8 Bar,Lube Oil System , Temperature Gauge-Temp. Range 0 To 80 Deg C, Working Pressure -2 Bar,Machinery Cooling System , Pressure Gauge,Max Operation Pressure 0-10 Bar, Fuel Oil System , Pressure Gauge,Max Operation Pressure 0-10 Bar,Machinery Cooling System, Fresh,Sea Water , Pressure Gauge,Max Operation Pressure 0-10 Bar,Machinery Cooling System, Fresh, Sea Water , Pressure Gauge,Max Operation Pressure 0-10 Bar,Lube Oil System , Pressure Gauge,Max Operation Pressure 0-10 Bar,Dispersant System , Pressure Gauge,Max Operation Pressure 0-10 Bar,Potable Water System , Pressure Gauge,Max Operation Pressure 0-15 Bar, Fire Fighting System, Fresh Water , Pressure Gauge,Max Operation Pressure 0-30 Bar,Compressed Air System , Vacuum Pressure Gauge- Max . Operating Pressure 2 To -1 Bar, Fire Fighting System , Vacuum Pressure Gauge- Max . Operating Pressure 2 To -1 Bar,Machinery Cooling System , Vacuum Pressure Gauge- Max . Operating Pressure 2 To -1 Bar,Potable Water System 1 31 , Disposable Pressure Transducer Kits Total Quantity : 164

BRR:7482156 Bids Are Invited For Demand Of Plant Spare Parts Strainer , Valve Fuel Shut Off , Hose , Cable Assembly , Universal Joint Assy , Pin Master , Screw , Washer Spring , Gauge Oil Level , Bolt , Nut , Pin Strainer , Valve Fuel Shut Off, Hose , Cable Assembly , , Hose Assembly Total Quantity : 193

BRR:7500231 Bids Are Invited For Repair and Overhauling Service - REPAIR OF HYDRAULIC JACK; REPAIR OF HYDRAULIC JACK; Yes; Buyer Premises Total Quantity :

BRR:7498942 Bids Are Invited For Pum, Hyd, Pvh074r01aa10a25000000200100010a , Hydraulic Pumps - Floating Pump Total Quantity : 8

BRR:7498423 Bids Are Invited For Hydraulic Hose 1 Inch _25_0 Min _26_4 Max_ Mm Id Sae 517 R13 Type At 350 Bar_ 35 Mpa,Steel Round Ba Total Quantity : 285915

BRR:7498411 Bids Are Invited For Mt Spare 4 22 Rear View Mirror , Transfer Case Kit , Window Lock , Cyl Assy Rr Wheel , Fuel Filter , Head Light Bulb , Bearing , Belt Tensioner , Clucth Lever , Brake Lever Front , Gear Lever , Engine Mounting Front , Oil Filter , Fuel Pump Motor , Fuel Tank Cap , Clutch Release Brg , Clutch Disc , Pressure Plate , Door Clip , Spark Plug , Cord Set High Tension , Knuckle Kit , Chain Sprocket Set , Axle Bolt , Brake Shoe Rear , Hose Rear View Mirror, Transfer Case Kit, Window Lock, Cyl Assy Rr Wheel, Fuel Filter, Head Light Bulb, Bearing, Belt Tensioner, Clucth Lever, Brake Lever Front, Gear Lever, Engine Mounting Front, Oil , Oil Filter Assembly For Wheel Loader Total Quantity : 39

BRR:7497852 Bids Are Invited For Tools For Techicians Socket Set 32Pcs , Oil Filter Clamp , Screw Driver Set , Combination Spanner Set 23 Pcs , Hydraulic Jack 3 Ton , Star Key Set , Spark Plug Spanner Mg , Allen Key Set , Stmt One Half Inch 6 Point Deep Socket , 812 Screw Driver Set , Aluminum Tray , Digital Clamp Meter , Fitter Trainee Tool Kit (Skill Development India) Total Quantity : 56

BRR:7497551 Bids Are Invited For Mt Store Shock Absorber Assy , Clutch Release Bearing , Fuel Feed Pump , Solenoid Coil , Hydraulic Pipe , Piston Ring , Oil Seal Shock Absorber Assy, Clutch Release Bearing, Fuel , Hydraulic Hose Feeding Pump Total Quantity : 15

BRR:7497343 Bids Are Invited For Ord Spare Hydraulic Head , Camplate , Valve Pressure Relief , Solenoid Valve , Drive Shaft , Td Piston , Vane Pump , Oil Seal , Hydraulic Gear Pump Total Quantity : 15

BRR:7496274 Supply Of Hydraulic Cylinder Manifold Assembly For Wagon Tippler 5 And 6 3 Items , Hydraulic Cylinder Manifold Assembly With I) Check Valve Ii) Pressure Relief Valve And Iii)Flow Control Valve Etc Complete,Part No.R983039079 , Hydraulicmanifold Assembly Withi) Check Valve Ii) Directional Spool Valveand Iii)Throttle Checkvalve Etc Complete -1No.Part No. R 983045394, R 98301523, R 9830311478 & 983032428 , Hydraulic Manifold Assembly Withi) Check Valve Ii) Pressure Relief Valve And Iii)Flow Control Valve Etc Complete,Part No.R983045909

BRR:7494035 Bids Are Invited For Double Gear Pump , Hydraulic Gear Pump Total Quantity : 1

BRR:7494029 Bids Are Invited For Wash Point-Pump Water Working Pressure 45Kg Per Cm2 , Hydraulic Ram , Tyre Removing Machine , Tyre Inflater , Co2 Extinguisher , Air Compressor , Nylon Wire Bride Hose , Gi, B Class Pipe , Sliding Jack-Hydraulic Trolley Jack For Light And Heavy Duty Vehicles , Pneumatic Operated Greasing Machine -50 Kg Drum Capacity , Pneumatic Operated Greasing Machine -25 Kg Drum Capacity , Battery Charger , Electric Welding , Gas Welding Set , Puncture Repair Machine , Grinding Machine , Bench Vices-Size 10 Inch , Digital Insulation Tester-Megger , Wheel Balancing Machine , Battery Cell Tester , Hydrometer , Tool Box Trolley , Battery Operated Trolley , Vacuum Cleaner , Foot Pump , Clamp Meter , Portable Spray Or Jet Hot Water Washer , Installation Testing And Commissioning Charges , Vehicle Lift Vehicle Servicing And Repairing Kit (Gujarat Govt) Total Quantity : 500

BRR:7493965 Bids Are Invited For Lp Turbine Compensators And Jacking Oil Hoses St020210670 - Compensator Nd350 L268 For Lp Extraxtion A1 And A3 For 125Mw Turbine , St020210669 - Compensator Nd400 L268 For Lp Extraxtion A2 For 125Mw Turbine , St020290225 - High Pressure Hose 16X1200 For Jack Oil Of Bearing 2 And 3 , St020290226 - High Pressure Hose 16X2200 For Jack Oil Of Bearing 2 And 3 , St020290227 - High Pressure Hose For Jack Oil Of Bearing 1 Compensator Nd350 L268 For Lp Extraction A1 And A3 Of 125Mw, Compensator Nd4000 L268 For Lp Extraction A2 Of , Hydraulic Hose Total Quantity : 14

BRR:7493899 Bids Are Invited For Hydraulic Hose Mse 1 0 Metre Length Hoses , 1 0 Metre Length Hoses With One Side End Fitting , 1 0 Metre Length Hoses With End Fitting , 0 5 Metre Length Hoses , 1 0 Metre Length Hoses With One Side End Fitting Stainless Steel , 0 5 Metre Length Hoses With One End Fitting , 0 5 Metre Length Hoses With End Fitting , 0 5 Metre Length Hoses With End Fitting Stainless Steel , 2 0 Metre Length Hoses , 2 Metre Length Hoses , Hydraulic Hose Total Quantity : 84

BRR:7493416 Bids Are Invited For Supply, Installation And Commissioning Of Hydraulic Hose-Tube Proof Pressure Test Rig , Hydraulic Hose Total Quantity : 1

BRR:7492943 Bids Are Invited For Hydraulic Jack 20 Ton Total Quantity : 66

BRR:7492653 Bids Are Invited For Procurement Of Repair Kit For Hydraulic Jack Spare Repair Kit For Vankos Make Hydraulic Jack Of 10T , Spare Repair Kit For Vankos Make Hydraulic Jack Of 20T , Spare Repair Kit For Vankos Make Hydraulic Jack Of 50T , Spare Repair Kit For Vankos Make Hydraulic Jack Of 50T Capacity Type Spsr 50 By 200 , Spare Repair Kit For Vankos Make Hydraulic Hand Pump , Jacks Hydraulic Total Quantity : 31

BRR:7492350 Bids Are Invited For Mt Stores Disc Clutch , Cover Assy Disc , Piston Ring , Big And Bering Set , Crank Shaft Bearing , Cylinder Head Gasket , Oil Pump , Water Pump Assy , Fan Belt Tensioner , Set Of Main Bearing 0 25Mm R S-I Over Si , Bush Con Rod , Gasket Cylinder Head , Main Bearing Cell , Anabond Al 673 350 Gms , Oil Pump Assembly , Push Rod , Fuel Feed Pump , Clutch Sleeve Cylinder Disc Clutch , Cover Assy Disc , Piston Ring , Big & Bering Set , Crank Shaft Bearing , Cylinder Head Gasket , Oil Pump, Water Pump Assy, Fan Belt , Feeding Pump Total Quantity : 33

BRR:7492146 Bids Are Invited For Accelerator Cable , Stopper Cable , Oil Pressure Pipe , Hydraulic Pump Assembly , Drive Shaft Assy , Brake Masater Cylinder , Hydraulic Pipe , Self Starter , Flange , Clutch Plate , Leather Cloth Black , Sr 998 , Automationtestcategory_Donotuse Total Quantity : 56

BRR:7492136 Bids Are Invited For Boq Based Bid Timing Belt , Water Pump Assy , Idler Pully Assy , Timing Tensioner , Kit Pad Front , Assy Tail Lamp Rh , Door Lock Lh , Rear Axle Shaft , Major Rep Kit Air Comp , Tapper Roller Bearing , Assy Combination Switch Timing Belt, Water Pump Assy, Idler Pully Assy, Timing , Roller Bearing (Bhel) Total Quantity : 17

BRR:7491999 Bids Are Invited For Mt007 Spark Plug , Carburator Assy , Carburator Hose , Carburator Bush , Hose Clip , Wiper Blade , Door Trim Set , Rear View Mirror , Clutch Cyl Assy , Convoy Light , Bendex Drive , Tube Fues , Door Trim Lock Pkt , Radiator Assy , Oil Sending Unit , Nozzle For Pump , Throttle Hose , Gasket Spark Plug , Timing Belt , Air Filter Primary , Air Filter Safety , Wheel Brg , Nozzle Rotary , Cross Disc , Roller Brg , Timing Device Piston , Vain Pump , Hydraulic Head , Roller , Roller Pin Spark Plug, Carburator Assy, Carburator Hose, Carburator Bush, Hose Clip, Wiper Blade, Door Trim Set, Rear View Mirror, Clutch Cyl Assy, Convoy Light, Bendex Drive, Tube Fues, Door Trim Lock Pkt, , Spark Plugs Total Quantity : 193

BRR:7491959 Bids Are Invited For Boq Based Bid Timing Tensioner , Control Valve , Rubber Coupling , Injector Nozzle , Engine Gasket Set , Piston Assy , Main Bearing Cell , Fuel Flexible Pipe , V Belt , Oil Filter Timing Tensioner, Control Valve, Rubber Coupling, Injector , Oil Filter Cartridges Total Quantity : 17

BRR:7491899 Bids Are Invited For Boq Boq Hose Formed 1 , Hose Formed , Hose Hydraulic , Hose 1 , Hose Hose Formed Of Bobcat Part No 61-Dbin-7226152, Hose Formed Of Bobcat Part No 61-Dbin-7226151, , All Terrain Vehicle (Mha) Total Quantity : 5

BRR:7487661 Bids Are Invited For Production Hydraulic Hoses Sae 100 R2a 14 , Production Hydraulic Hoses Sae 100 Rat 38 , Production Hydraulic Hoses Sae 100 R12 1-2 , 3-4 Hydraulic Hose , Production Hydraulic Hoses Sae 100 Rat 1 , Hydraulic Hose Id 1 1-4 , Multipara Monitor - Low End Hand Operated Hydraulic Pipe Bender Total Quantity : 640

BRR:7487572 Bids Are Invited For Repair Kit For Air Pressure Governor , Alternator , Revers Light Switch , Wheel Cyl Repair Kit , Oil Seal , Clutch Cyl Repair Kit Repair Kit For Air Pressure Governor, Alternator, , Hydraulic Cylinder Seal Kit Total Quantity : 12

BRR:7487317 Bids Are Invited For Tools Combination Spanner Set 10Mm To 24Mm , Nose Plier 0Mm , Oil Filter Plier , 16 Inch Hoteche Groove Joint Plier , Stanley 254Mm Curved Locking Plier , Hand Gloves For Technician , Scorpio Check Nut Spanner , Lithium Ion Portable Cordless Lamp , 3 Ton Hydraulic Jack , Taparia Small Socket Set , Elak Mark I Auto Electric Test Bench , Clamp Meter Combination Spanner Set 10Mm To 24Mm, Nose Plier 200Mm, Oil Filter Plier, 16 Inch Hoteche Groove Joint Plier, Stanley 254Mm Curved Locking Plier, Hand Gloves For , Combination Wrench Open Jaw Wrenches (Spanners) As Per Is 2028 Total Quantity : 20

BRR:7487306 Bids Are Invited For Procurement Of Engineer Spares Hose For Pump , Hose , Hose Nylon , Wiper Motor Assy , Lock Assy , Control Cable , Pipe Sa , Hose Hyd , Element Air Filter Safety , Element Air Filter Primery , Air Filter Outer , Air Filter Inner , Pre Cleaner , Engine Oil Filter , Pilot Filter , Hyd Filter , Pipe For Boom Cyl , Adaptor , Bushing , Rubber Hose , Pipe Boom Cyl 1 25 , Hydraulic Hose Total Quantity : 84

BRR:7487131 Bids Are Invited For Hydraulic Pump, Pr. Gauge, Hp Flexible Hose And , Hydraulic Ladder Total Quantity : 4

BRR:7487083 Bids Are Invited For Bty Cut Off Switch , Ignition Cum Lock Switch , Emergency Valve , Hydraulic Pump , Injector Nozzle , Utility Vehicle Total Quantity : 10

BRR:7487026 Bids Are Invited For Mt 001 Hand Pump , Hydraulic Cylinder Ram , Door Mechanism , Fuel Return Tube , High Pressure Hose , Valve Relay Air Pressure , Dia 8Mm Hose , Needle Roller Bearing Hand Pump, Hydraulic Cylinder Ram, Door , Needle Valve Total Quantity : 17

BRR:7486989 Bids Are Invited For Boq Ord Hydraulic Pump Assy , Radiator With Cool And Cap Comp , Field Coil Assy , Universal Joint , Pressure Plate Assy , Rh Wheel Cylinder , Lh Wheel Cylinder , Cable Engine Stop , Air Filter , Gear Pump , Power Steering Seal Kit , Silencer , Clutch Disc Assy 30 D Hydraulic Pump Assy, Radiattor With Cool And Comp, Field Coil Assy, Universal Joint, Pressure Plate Assy, , Oem Spares For Automobiles Total Quantity : 34

BRR:7486969 Bids Are Invited For Boq Mt Assy Head Lamp Rh , Brush Gear Assy , Stator Assy , Rectifire Assy , Drive Pinion , Assy Hub Front , Drying And Distri Unit , Hub Whee , Assy 2 Dia Driven Plate , Tensioner Belt , Clutch Release Bearing , Spring Brake Chamber , Nozzle , Graduated Hand Brake Valve , Gasket , Strut Assy Assy Head Lamp, Brush Gear Assy, Startor Assy, Rectifire Assy, Drive Assy, Assy Hub Front, Drying , Oem Spares For Automobiles Total Quantity : 28

BRR:7485143 Tender For Inviting Rates For Vehicle Spare Parts With Repairing For The Financial Year 2025-26; 1 Inviting rates forvehicle spare parts with repairingfor the financial year 2025-26 2 Tractor Parts 3 Spade Bush 4 Shaft Pin Bush 5 Chain Pin Bearing 6 Bearing Seats 7 Front Wheel Seat 8 Bearing 32208 9 Bearing 30305 10 Boser 11 Check Nut 12 Chirma Pin 13 Cap 14 Refrigerator Mesh 15 Hosepipe Kit 16 Hosepipe Quillamp 17 Water Wadi Repairing 18 Refrigerator Rod 19 Tepid Chamber Rod 20 Tepid Oring 21 Gas Kit 22 Air Cleaner Hose Pipe 23 Air Cleaner Rod 24 Chamber Packing 25 Ring 26 CR Piece 27 Slip Oring 28 Head packing kit 29 Ball guides 30 Gazelle pin 31 Gazelle bus 32 Gazelle piston 33 Liner diesel filter 34 Overflow pipeline 35 Main pipe line 36 Gear wax packing kit 37 Interlock spring 38 Gear hose 39 Gear bearing 40 Reverse gear 41 Main shaft 42 Clutch shaft 43 Gear lever hose 44 Brake belt 45 Brake shoe 46 Brake spring 47 Wheel cylinder 48 Wheel ore 49 Wheel cylinder complete 50 Ring rod 51 Front ring 6-16 size 52 Lifter hydraulic pump 53 Hydraulic shaft 54 Male female 55 Hub Bolt Front Rear 56 Hitch Pin 57 Hitch 58 Trolley Hitch Pin 59 Trolley U Bolt 60 Trolley Hub Bearing 1316 61 Trolley Bolt 62 Trolley Axle 63 Trolley Dicks 64 Steering Bearing 65 Steering Rod 66 Side Plate Packing 67 Side Plate Stud 68 Steering Wheel Bush 69 Center Pin Bush 70 Front Spender 71 Rear Half Axle 72 Rear Axle 73 Tyre 6-16 Size 74 Tyre Set 12-04-28 Size 75 Tyre 9-16 Size 76 Shaft Bolt, 13 Nos. 77 Shaft Bolt, 17 Nos. 78 Rear Axle Stud 24 Nos. 79 Center swing rubber 80 Center swing 81 Axle packing 82 Crank advector volt rear 83 Arm volt big 84 Arm volt small 85 Flywheel chain 86 Crank bearing 6204 87 Tata S Chota Hathi 88 Clutch plate 89 Pressure plate 90 Release bearing 91 Brake pad 92 Hub 93 Bearing 30204,32/32 94 Spring main second 95 Spring 3, 4 number 96 Main second front 3 number 97 Swing leaf 98 Pin single nut - double nut 99 Fiber washer 100 Center volt 101 Buss spring K U volt 8 inch rear 102 Front spring K U volt 103 Cross out Lock wale 104 Accelerator wire 105 Clutch wire 106 Hose pipe of radiator 107 Oil filter / Diesel filter 108 Small and big ends 109 Oil pressure socket 110 Hydraulic pump 111 Ring piston 112 Brass gas kit 113 Terminal 114 Alternator plate 115 Carbon bush 116 Cutout 117 Stretcher coil seal 118 Brake belt complete 119 Rear seal 120 Front seal 121 Dictator shaft 122 Axle rear 123 Crick 124 Gudgeon pin 125 Connecting 126 First gear 127 Second gear 128 Third gear 129 Fourth gear 130 Reverse gear 131 Gear counter 132 Main shaft 133 Top shaft 134 Steering wax bearing 135 Inner steering rod 136 Outer steering rod 137 Tie rod end 138 Front wheel pin 139 Fuel pump lifter 140 Filter body 141 12 volt battery 142 Tyre set 14 no. 143 Welding work 144 Sheet fitting work 145 Tata 407 146 Clutch plate 147 Pressure plate 148 Figure 149 Release bearing 150 Gear wax 151 Gear hinge set 152 Cross 153 Holder 154 Flanch gear 155 Flanch 156 Gear Chillum 157 Oil Filter 158 Diesel Filter 159 Gas Kit 160 Head Gas Kit 161 Teflon Packing 162 Chamber Packing 163 Front Hub Bearing 164 Crowl Bearing 165 Pinion Seal 166 Soft Chillum 167 Soft Gulla 168 Center Swing Bearing 169 Center Swing Riveter 170 Flanch Check Nut 171 Soft Cross 172 Soft Bolt 173 Center Bolt 174 Spring Washer 175 Spring Hanger 176 Spring Swinger 177 Spring U-Bolt 178 Wheel Oil Seal 179 Corn Basin 180 Lock Washer 181 Crown Packing 182 Steering 183 Steering tiread end 184 Bush rod end 185 Main second front rear 186 Steering bearing 187 Steering worm rod 188 Headlight complete 189 Brakelight complete 190 Horn 191 Engine foundation ballast 192 Gear wax 193 Foundation ballast 194 Banjo washers 195 Return valve 17,19,number 196 Main diesel pipe line 197 HV volt 198 HV gaff plate 199 Front HV cover 200 Axle stud rear 201 Axle packing 202 Heger volt 203 Cross 204 Chamber volt 205 Radiator cap 206 Radiator Hose Pipe 207 Hose Pipe Clamp 208 Cooling Water 209 Battery Terminal 210 Headlight Bulb 211 Battery 12 Volt 212 Tyre 7-50-16 Size 213 Ghetto Lock

BRR:7482112 Bids Are Invited For Spring Lock-Locking Unit , Inner Tube , Jacks Hydraulic Total Quantity : 19

BRR:7481980 Bids Are Invited For Hydraulic Pump For Nose Jack , Caster Wheel , Caster Wheel Total Quantity : 27

BRR:7481936 Bids Are Invited For Ord Grants Hose Connection 322 , Sealing Ring , Casing , Tappet Cover Gasket , Solenoid Valve , Cable 139 , Hub Seal , Hydraulic Hose Total Quantity : 12

BRR:7481722 Bids Are Invited For Hydraulic Cylinder And Hand Pump Set (Q3) 2 Year (S) Total Quantity : 3

BRR:7481546 Bids Are Invited For Mt Lpd 11 Minor Rep Kit For Clutch M Cyl Consistin , Assy Tail Lamp Lh , Assy Mudflap Rear , Assy Wiper Blade , Relay , Stainer Fuel Switch , Repair Kit , Master Cylinder Repair Kit Consisti , King Pin , Pressure Plate Assy , Ignition Cum Steering Lock , Assy Head Lamp Lh , Assy Sunvisor Lh , Centre Bolt M12x200 Is9484 , Arm Windshield Wiper , Speedo Cable 3Pt2 Dia 4300 Mm Long , Cartridge , Starter Solenoid Switch , Lever Accelerator , Hose Assy , Assy Tail Lamp Rh , Relay Solehoid Engine Starter Electrical , Air Filter Element Primary , Field Coil Assy , Drive Assy , Assy Timing Belt Tensioner Complete , Solenoid Switch , Air Filter Element Safety Minor Rep Kit For Clutch M Cyl Consistin, Assy Tail Lamp Lh, Assy Mudflap Rear, Assy Wiper Blade, Relay, Stainer Fuel Switch, Repair Kit, Master Cylinder Repair Kit Consisti, King Pin , Pressure Plate Assy, Ignition Cum Steering Lock, Assy Head Lamp Lh , Assy Sunvisor Lh, Centre Bolt M12x200 Is9484, Arm , E - Tourist Vehicle Passenger (V3) Total Quantity : 712

BRR:7481341 Bids Are Invited For Cover Assy , Cover Assy-S , Ram Hydraulic Ram Assy , Release Bearing Butee Dm 86P , Seal Kit Piston Rack , Hydraulic Cylinder Seal Kit Total Quantity : 12

BRR:7478710 Bids Are Invited For 0-5210-415477 Jack Hydraulic Hand , Hydraulic Jack Cylinder Total Quantity : 28

BRR:7478573 Bids Are Invited For 1 PUMP HYDRAULIC RAM HAND DRIVEN 2 SPRING ASSY FRONT 3 FUEL SHUT OFF SOLENOID 4 WATER FILTER 5 REGULATOR VEHICLE WINDOW 6 FILTER FLUID 7 DIRECTION INDICATOR 8 HOSE CLAMP TB-146 9 RETRO-FITMENT OF REAR VIEW MIRROR FOR 10 LOCK ASSY STEERING 11 PRIMARY ELEMENT 12 WIPER BLADES 13 JACK ASSY 14 LEVER MANUAL CONTROL 15 RING BEARING RETAINER 16 LINK ASSY WIPER 17 HARNESS ASSY WIRING ENG 18 REAR HUB BEARING 19 LEVER GEAR SHIFTING CONTROL 20 WATER PUMP 21 PINION DIFFERENTIAL FRONT 22 OIL SEAL 23 CABLE ASSY ACCELERATOR 24 SWITCH ASSY STARTING MOTOR 25 RELAY ASSY 26 REGULATOR ASSY FUEL PRESSURE

BRR:7478293 Repairing Of 02 Nos. Hydraulic Tandem Pump Of Water Sprinklers Sl. No. 28199 And 28298 Working At Ilbl Ocp, Lakhanpur Area, Mcl.

BRR:7477758 Bids Are Invited For Hydraulic Unit Sma05-426.0-C20-55. F-B4602400, Pn. R335c9601b1a For Tajmac H63 Contour Model Cnc Hydraulic Unit Sma05-42-16.0-C20-55.F-B46-02400 , Hydraulic Gear Pump Total Quantity : 1

BRR:7477201 Bids Are Invited For Variable Vane Hydraulic Pump Tech. Specification Of Pump: Max. Operating Pressure: 70 Kgf-Cm2 Displa Variable Vane Hydraulic Pump Tech. Specification Of Pump: , Variable Displacment Vane Pump(Bhel) Total Quantity : 2

BRR:7477189 Bids Are Invited For Jack 10 Ton Capacity Single Piston Trolley Jack (Tj-10) , Jacks Hydraulic Total Quantity : 1

BRR:7477023 Bids Are Invited For Passenger Fan 09 Mse 1527-2008Cn Passenger Fan , 6220-004450 Indicator , 2157-5440-0115 Head Light Assy , 278901155306 Head Cyl Gasket , 2573-4242-0101 Hand Brake Assy , 279705140105 Assy Rff And Hla , 2763-2520-0116 Clutch Plate , 2752- 2540-0105 Pressure Plate , 278905110110 Assy Auto Tensioner 1527-2008Cn Passenger Fan , 6220-004450 Indicator , 2157-5440-0115 Head Light Assy , 278901155306 Head Cyl , Pressure Plate Gasket Cylinder Head Total Quantity : 34

BRR:7494030 Bids Are Invited For Intrinsic Safe Mobile Phone , Intrinsically Safe Mobile Phones Total Quantity : 44

BRR:7488492 Bids Are Invited For Supply Of Instrinsically Safe Phone At Vvspl Srs , Intrinsically Safe Mobile Phones Smart Phone Total Quantity : 1