BRR:8292830 Bids Are Invited For Supply Inst. Site Hardware Ground Mounted , Deployment One Time Ground Mounted , Supply And Inst. Site Hardware Rooftop , Deployment One Time Rooftop , Supply Of Led Tv Screens , Service Charges Reports And Config , Technical Support , Saas Based License Ground Mount And Rooftop , Cloud Charges Upto 250 Mw Per Month , Cloud Charges 250 Mw To 500 Mw Per Month , Cloud Charges 500 Mw To 1 Gw Per Month , Cloud Charges 1 Gw To 1.8 Gw Per Month Total Quantity : 1460450

BRR:8292121 Bids Are Invited For Cloud-Based Video Conferencing Services 2.0 - As Per The Atc; No; Yes, No; As Per The Atc; Ip Address, All, E.164, Url

BRR:8291709 Bids Are invited for Providing And Fixing Of False Ceiling Using A Combination Of Gypsum Board And Pvc Panels In The Center And Finished With Putty And Painting , Providing And Fixing Of Wall Panel On Both The Commanding Officer Room Using 19 Mm Plywood And Finished With Pvc Louvers And 1 Mm Thick Acrylic Sheet Including Profile Lighting Caps - Providing And Fixing Of Wall Panel On Both The Commanding Officer Room Using 19 Mm Plywood And Finished With Pvc Louvers And 1Mm Thick Acrylic Sheet Including Profile Lighting Caps Stand As Shown In The 3D Design Given By The Architect , Fixing Of All Lighting Fixtures Like Spot Lights Hanging Lights Rope Lighting Neon Lighting Ceiling Lighting As Shown In The 3D View , Laying Of Fire Retardant Electrical Cables Using Finolex Wires Legrand Make Metal Boxes And Legrand Switches And Sockets Inclusive Of All Necessary Fixtures And Fittings Panel Boards Metal Boxes - Laying Of Fire Retardant Electrical Cables Using Finolex Wires Legrand Make Metal Boxes And Legrand Switches And Sockets Inclusive Of All Necessary Fixtures And Fittings Panel Boards Metal Boxes With All Accessories As Per The Design Given By The Architect , Providing And Fixing Of Wall Upvc Lovers Wall Pane Line Using 19 Mm Plywood And Finished With Laminate Up To Tiles Level And Pvc Louvers For The Rest Of The Area Design Given By The Architect , Providing And Fixing Of Trophy Display Unit Two No Using 19 Mm Plywood And Finished With 1 Mm Thickness Laminates Sheet Inclusive Of Mural Art On Acrylic Sheet Display Unit With Profile - Providing And Fixing Of Trophy Display Unit Two No Using 19 Mm Plywood And Finished With 1 Mm Thickness Laminates Sheet Inclusive Of Mural Art On Acrylic Sheet Display Unit With Profile Doors Lighting With Hardware As Shown In The Design Given By The Architect , Providing And Fixing Of Cloud Theme Based Stretch Ceiling As Per The Design Given By The Architect , Providing And Fixing Of Acp Panel For Entrance Canopy With Aluminum Grid As Pe

BRR:8291647 Bids Are Invited For Annual Maintenance Service -Data Center Assets - Cloud Services; Cloud Services; Oem Authorised Service Provider

BRR:8291360 Bids Are invited for Cloud Space , Cloud Server , Cloud Space , Server , Software , Software , Required Software For Interactive Class , Microsoft Power , Editing And Graphics Software , Math Works Matlab Total Quantity : 22

BRR:8289000 Tender For Installation Of Cloud Server System At Municipal Building With Annual Maintenance Contract For The Period Of One Year And Migration Of Existing Server Data To The New One At Guskara Municipality.

BRR:8285350 Bids Are Invited For Nucleic Acid Sequencing and Genotyping Service - DNA sequencing; Plant; Leaf; To be collected by the service provider from the buyer; Illumina, Oxford Nanopore, Hi-C; 90% and above; 100x; High throughput; Raw data, Primary analysis; Cloud storage; 90..Total Quantity :

BRR:8283173 Bids Are Invited For Cloud-Based Video Conferencing Services 2.0 - 1000; Yes; Yes; 500; All

BRR:8283147 Bids Are invited for 48 Port Tor Switch , Indoor Wireless Access Point , High-Performance Gpu Compute Server , 48 Gb Ar Vr Ai Tensor Core Gpu , Graphics Drawing Tablet With Smart Pen , 42U Server Rack , 20 Tb Ip San Drive , Apple Vision Pro , Metaquest Pro Headset , Monochrome Laserjet Printer , Unity Pro Build Server License And Setup , Unity Devops Automation Suite , Container Runtime And Kubernetes Cluster Setup , Ci Cd Automation Environment , Network And Cloud Monitoring System , 10 Kva Online Ups , Cloud Instances For Rendering And Elastic On Demand Services Total Quantity : 59

BRR:8277753 Bids Are Invited For Facility Management Services - LumpSum Based - Commercial; GRAM PANCHAYAT DHILWASI MAIN TIKALNATH PASIQILA KE PAAS WATER COOLER KI STHAPANA KA KARYA; Consumables to be provided by service provider (inclusive in contract cost) Total Quantity :

BRR:8277749 Bids Are Invited For Facility Management Services - LumpSum Based - Commercial; GRAM PANCHAYAT NAROSA CHAURAHA MANOJ KI DUKAAN KE PAAS WATER COOLER KI STHAPANA KA KARYA; Consumables to be provided by service provider (inclusive in contract cost) Total Quantity :

BRR:8275917 Bids Are Invited For Custom Bid For Services - Comprehensive Annual Maintenance Contract For 2 Nos Of Automatic Hot Box Detector With Cloud Server Habd Hot Axle Box Detector Installed At Lc Gate Nn 100 And Lc Gate Nn 73 In Apdj Division, For A Period Of Three Years

BRR:8271966 Bids Are Invited For Facility Management Services - LumpSum Based - Commercial; GRAM PANCHAYAT CHAKPRITHVIPUR KE MAJRA ARJUNPUR MAIN IMLA BABA MANDIR KE PAAS WATER COOLER KI STHAPANA KA KARYA; Consumables to be provided by service provider (inclusive in contract cost) Total Quantity :

BRR:8271964 Bids Are Invited For Facility Management Services - LumpSum Based - Commercial; GRAM PANCHAYAT PARSEHIYA MAIN MEWA LAL KE GHAR KE PAAS WATER COOLER KI STHAPANA KA KARYA; Consumables to be provided by service provider (inclusive in contract cost) Total Quantity :

BRR:8271963 Bids Are Invited For Facility Management Services - LumpSum Based - Commercial; GRAM PANCHAYAT KUNAURA SHAHPUR MAIN SHAHPUR KUNAURA BAZAAR CHAURAHE KE PAAS WATER COOLER KI STHAPANA KA KARYA; Consumables to be provided by service provider (inclusive in contract cost)

BRR:8264689 Bids Are Invited For Virtual Machine (Compute) - Virtual Private Cloud (Vpc); Microsoft Windows Server; 12; 2; 1:1; Web Server; Primary Dc; 500 Total Quantity :

BRR:8264358 Bids Are Invited For Custom Bid For Services - Aws Sagemaker Studio

BRR:8295702 Supply Of Design, Manufacture, Supply, Installation, Testing, Commissioning And Maintenance Of Heavy Duty Elevator Of Machine Room Less Type And Gear Less Type 08 No. Persons Capacity With A Speed Of 1.0 M/S Centre Opening Sliding Door, Double Door Type With Four Stops And Four Openings (G+3 Floors) As Per Rdso Specification Rdso/2013/Em/ Spec/0016 (Rev 1) -2019 Or Latest With A Warranty Of Two Years And Comprehensive Annual Maintenance Contract For A Period Of 10 Years After Completion Of Warranty Period Of Two Years. (Rate For Comprehensive Annual Maintenance Contract For A Period Of 10 Years After Completion Of Warranty Period Of Two Years To Be Quoted Separately Apart From Rate Of Elevator). The Elevator Should Be Suitable To Be Connected To Irniyantrac Software. The Elevator Should Be Equipped With Lift Working /Failure Information Through Gprs Enabled Sms Alert System, Cctv Inside The Lift Car Connecting To Security Systems Through Wireless / Wifi And Audio Announcement Features. Warranty-Two Years After Successful Commissioning And Acceptance Of The Elevators.Design, Manufacture, Supply, Installation, Testing, Commissioning And Maintenance Of Heavy Duty Elevator Of Machine Room Less Type And Gear Less Type 08 No. Persons Capacity With A Speed Of 1.0 M/S Centre Opening Sliding Door, Double Door Type With Four Stops And Four Openings (G+3 Floors) As Per Rdso Specification Rdso/2013/Em/ Spec/0016 (Rev 1) -2019 Or Latest With A Warranty Of Two Years And Comprehensive Annual Maintenance Contract For A Period Of 10 Years After Completion Of Warranty Period Of Two Years. (Rate For Comprehensive Annual Maintenance Contract For A Period Of 10 Years After Completion Of Warranty Period Of Two Years To Be Quoted Separately Apart From Rate Of Elevator). The Elevator Should Be Suitable To Be Connected To Irniyantrac Software. The Elevator Should Be Equipped With Lift Working /Failure Information Through Gprs Enabled Sms Alert System, Cctv Inside The Lift Car Connecting To Security Systems Through Wireless / Wifi And Audio Announcement Features. Warranty-Two Years After Successful Commissioning And Acceptance Of The Elevators.,Design, Manufacture, Supply, Installation, Testing, Commissioning And Maintenance Of Heavy D Uty Elevator Of Machine Room Less Type And Gear Less Type 08 No. Persons Capacity With A Speed Of 1.0 M/S C Entre Opening Sliding Door, Double Door Type With Four Stops And Four Openings (G+3 Floors) As Per Rdso Spe Cification Rdso/2013/Em/ Spec/0016 (Rev 1) -2019 Or Latest With A Warranty Of Two Years And Comprehensiv E Annual Maintenance Contract For A Period Of 10 Years After Completion Of Warranty Period Of Two Years. (Ra Te For Comprehensive Annual Maintenance Contract For A Period Of 10 Years After Completion Of Warranty Peri Od Of Two Years To Be Quoted Separately Apart From Rate Of Elevator). The Elevator Should Be Suitable To Be C Onnected To Irniyantrac Software. The Elevator Should Be Equipped With Lift Working /Failure Information Th Rough Gprs Enabled Sms Alert System, Cctv Inside The Lift Car Connecting To Security Systems Through Wirel Ess / Wifi And Audio Announcement Features. Warranty-Two Years After Successful Commissioning And Accept Ance Of The Elevators. [ Warranty Period: 24 Months After The Date Of Delivery ] ] , Comprehensive Annual Maintenance Contract For Heavy Duty Elevator Mentioned At Item.No.1. [ Warranty Period: 2 Years, Amc Period: 10 Years, Rate Of Discounting: 10 % ] ] At (Location) Sse/E/M/Ckl, Scr Telangana 2.00 Numbers Page 1 Of 11 Run Date/Time: 15/09/2025 15:41:01Stores/South Central Rly

BRR:8295512 Supply Of Three Points Digital Inside Micrometer With Setting (Calibrating) Ring And Extension Rod, With Wi-Fi Recording System, Range: 150-250 Mm, L.C.: 0.001Mm. Firm Should Send Mtc & Mgc And Calibration Certificate Of Nabl Approved Lab Along With Supply.Three Points Digital Inside Micrometer With Setting (Calibrating) Ring And Extension Rod, With Wi-Fi Recording System, Range: 150-250 Mm, L.C.: 0.001Mm. Firm Should Send Mtc & Mgc And Calibration Certificate Of Nabl Approved Lab Along With Supply.,Three Points Digital Inside Micrometer With Setting (Calibrating) Ring And Extension Rod, With Wi-Fi Recording System, Range: 150-250 Mm, L.C.: 0.001Mm. Firm Should Send Mtc & Mgc And Calibration Certificate Of Nabl Approved Lab Along With Supply. [ Warranty Period: 30 Months After The Date Of Delive Ry ] ] => Limited

BRR:8294792 Supply Of Firewall/Vpn Devicesfirewall/Vpn Devices,Firewall/Vpn Devices - Supply, Installation And Commissioning Of Firewall With One Year Warranty Similar To Sophos Xg S 106 Or Better Make. [ Warranty Period: 12 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitted: Max 8 Lacs ] ]

BRR:8293493 Deposit-C Ward, Govt. Medical College , Kalamassery-Supply And Installation Of Wi-Fi Access Point. -General Electronics Work Deposit-C Ward, Govt. Medical College , Kalamassery-Supply And Installation Of Wi-Fi Access Point. -General Electronics Work

BRR:8293122 Bids Are Invited For Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; Dell , Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; hp , Annual Maintenance Service - Desktops, Laptops and Peripherals - Desktop PC; Lenovo , Annual Maintenance Service - Desktops, Laptops and Peripherals - Monitors; Lenovo , Annual Maintenance Service - Desktops, Laptops and Peripherals - Monitors; hp , Annual Maintenance Service - Desktops, Laptops and Peripherals - Monitors; Dell , Annual Maintenance Service - Desktops, Laptops and Peripherals - Laptop; Dell , Annual Maintenance Service - Desktops, Laptops and Peripherals - Servers; IBM x3650 M2 series (STOA Linux & Symantec,Wsus Server) , Annual Maintenance Service - Desktops, Laptops and Peripherals - Servers; IBM x3650 M4 Series (Storage Data Server) , Annual Maintenance Service - Desktops, Laptops and Peripherals - Servers; VNX5400 Storage , Annual Maintenance Service - Desktops, Laptops and Peripherals - Multifunction Printer ( Monochrome , Laser , Separate Drum & Tonner, High range); hp , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco Catalyst 3850 L3 48 Port switch , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco Catalyst 3750 L3 switch , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco Catalyst 2960s 48 TS-LL L2 switch , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco SG300 PoE Switch , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco Catalyst 2960-S 48 TS-LL , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco SG350X-24 Port , Annual Maintenance Service - Desktops, Laptops and Peripherals - Switches; Cisco SG350XG-2F10 , Annual Maintenance Service - Desktops, Laptops and Peripherals - Wi-Fi Devices; Cisco CT-2504-K9 , Annual Maintenance Service - Desktops, Laptops and Peripherals - Wi-Fi Devices; Cisco 2700I Series , Annual Maintenance Service - Desktops, Laptops and Peripherals - Providing Services of FMS Resident Engineer at WRLDC Office, GRIDINDIA, Mumbai, as per the detailed Scope of Services mentioned in bid documents and as per the directions of Engineer-.. Total Quantity :

BRR:8292422 Purchase Of Smart Led Projectorfor Civil Department Purchase Of Smart Led Projector For Civil Department , 1010233440 - Building Planning , I) Smart Led Projecter Specifications : • Screen Size: 96.5 – 569 Cm • Native Resolution : 1920 * 1080 Fhd • Max. Supported Resolution : 1080P (Max) • Ram : 1 Gb • Core Processor : Quad Core Processor • Storage (Rom): 32 Gb • Android Version : 9.0 • Wi-Fi Connectivity : Dual Band (2.4 Ghz & 5Ghz) • Bluetooth Version: V5.1 • Display Technology: Led • Lifespan : 30,000H • Brightness: 13,000 Lumens • Contrast Ratio : 1000:1 • Projection Distance : 1.2M – 6.5M • Port Interface: Aux Out, Usb * 2, Hdmi * 2, Video File Format : Hevc/H.265, Mpeg1/2, Mpeg4, Divx 3.11, Divx 4.12, Divx 5.X, Divx 6, Xvid, Sorenson H.263, H.263, H.264, Avs, Avs+, Avs2, Vc1, Motion Jpeg, Pv30/Rv40 • Input Voltage : Ac 100 – 240V, 50/60Hz • Product Dimension (W*D*H) : 290 * 225 * 100 Mm • Package Dimension (W*D*H) : 390 * 130 * 265 Mm • Net Weight : 2.3 Kg Ii) Smart Class Board • Screen Type: Matte White Board • Size: 120 Inches (16:9 Aspect Ratio) Iii) Ceiling Mount Iv) Hdmi Cable – 15 M V) Power Cable – 15 M

BRR:8291630 Bids Are Invited For Internet Bandwidth And Replication Service - Internet Leased Line; Goverment Service Provider, Private Service Provider; Class A; Unified; 20

BRR:8291114 Bids Are invited for Wireless Access Points , Hardware Fire Wall - Hardware Firewall , Testing , Commissioning , Installation Total Quantity : 19

BRR:8291078 Bids Are Invited For Facility Management Services - Lumpsum Based - Pm Shri Jawahar Navodaya Vidyalaya; Enhancement Of School Facilities And Aesthetics,Atal Lab Material Procurement And Setup And Atal Lab Materials And Digital Software Hardware Internet Facility Victory ..

BRR:8290754 Bids Are Invited For As Per Attached Product Switch , As Per Attached Product Patch Cord , As Per Attached Product Wifi Router , As Per Attached Product Cat 6 Cable Roll 305 Mtr , As Per Attached Product Giga Port Switch , As Per Attached Product Specification Total Quantity : 122

BRR:8290704 Bids Are Invited For Custom Bid For Services - Integration And Up gradation Of Cctv System For Safeguarding Of Cg Assets At Cgdhq-9; Wall Mount enclosures specially designed for small networking, domestic applications, Audio Video, Telecom and Lab applications. Enclosures are fabricated out of CRCA steel, CNC programmed, punched, bended, welded and powder coated with highest quality standards Size 6U Rack Mount Power Strip Heavy Duty Surge Protector with Overload 2 Protection for Server Rack, Home & Office (Black) Display 32 Inch 2 HDMI ports to connect Set-Top box/DTH, Blu Ray players, Gaming Console and other compatible external devices 1 USB ports to connect hard drives and other USB devices WI-FI | 1 Composite In (AV) Port | 1 Ethernet (LAN) Port 1 Digital Audio Out (Optical) Port | RF In (Terrestrial/Cable input) | Anynet+ (HDMI-CEC) Support HDMI A / Return Ch. Support HDMI Quick Switch 600VA Line Interactive UPS with Compact Size & lightweight Inbuilt Automatic Voltage Regulator (AVR) For Boost and Buck. 600VA is a superior microprocessor. Poe Extender, 1 in 4 Out PoE Repeater, 10/100Mbps, Extends 250m, 60W Comply with IEEE802.3af/at for PoE Switch/Injector and Security POE Camera Over Cat5/B Cable, IP66. Supply and Installation 4MP (4-megapixel) IP security camera. that captures and transmits high-definition video over an internet protocol (IP) network. With a resolution of 2560 x 1440 pixels (or 1440p), produces footage that is clearer and more detailed than standard 1080p (2MP) cameras, offering enhanced digital zoom capability Ingress Protection IP67. Supply and Installation of BMP 64 Channel 2 SATA NVR 64 Channel Network Video Recorder, Two-Way Audio: With voice Intercom support, carry two-way conversations while watching. your feed from anywhere. Suitable for management. 1 HDD Interface (up to 16 TB): Stores up to 16 TB on a SATA hard drive, keeping your data storage secured locally. ONVIF Ensure Compatibility, H.265+: Without using any extra bandwidth 4MP IP PTZLens type: PTZ, Effective Pixels: 2884 x 1624 Focal length: 4.8-120mm, Resolution: 4MP, IR distance: 8160m, Material: Metal (Newly) Supply and Installation and Configuration of & Port Outdoor PoE Switch with Port PoE+, 2 Ethernet UpLink, 10/100Mbps, 120W 802.3af/at PoE, Weatherproof Fanless Plug & Play Network Switch 9 with SFP+ Port with SFP Module SM type. Supply and Installation of surveillance hard drive embodies cutting-edge technology specifically designed for the evolving demands of moden surveillance systems. This hard drive is optimised for 24/7 video recording environments, handling intense workloads with ease and reliability. Efficient power and Seagates Health Management System ensures ultra-reliable performance. SkyHawk drives support up to 180 TB of data per year, with features like built-in rotational vibration (RV) sensors to maintain performance even in multi-bay systems. This ensures scalable and flexible surveillance setups. 8TB Video Internal Hard Drive HDD 3.5 Inch SATA 6 Gb/s 256 MB Cache for DVR NVR Security Camera System. Enhanced performance cable for transmission of high speed data signals on LANs. Supports Gigabit Ethernet (1000 baseT) standard. Operates at bandwidth of 250 MHz. Cable will be compliant to TIA/EIA-568-C2 channel performance up to 70 meter. Conductor Diameter 23AWG, Conductor Resistance (DC): 93.57/1000 mtr @20°c Max Resistance Unbalance: 5% Max Mutual Capacitance: 5.6 nf/100 mtr Max NVP: 69% Impedance: 100±15% Worst Case cable skew: Orange-White with Orange Brown-White with Brown Blue-White with Blue Green-White with Green 1-24-57-83-6 CAT 6 Twisted Pair Armored Cable. Enhanced performance cable for transmission of high speed data signals on LANs. Supports Gigabit Ethernet (1000 baseT) standard. Operates at bandwidth of 250 MHz. Cable will be compliant to TIA/EIA-568-C.2 channel performance up to 70 meter Aluminium Wire Armoring Insulation Conductor Jacket Cross Separator Inner Jacket Size of Wire: 0.80mm Thickness of Outer Jacket: 0.85mm (Nom.) Capacitance Unbalance Pair/Ground: 330PF/100M Max Supply and installation Fiber Network 8 Strand armed cable for Single Mode 1310 nm and 1550 nm for single-mode fiber over 12 longer distances. Installation and Upgradation of existing Video Surveillance System and Network Device into single Network for centralised Monitoring at MSO, with all accessories Fiber Patch cord, R345 Patch Card, Fiber JB, Camera ABS 38

BRR:8290626 Bids Are invited for Telephone Set Digital Binatone , Telephone Set Betel , Battery 12V For Gun , Network Booster , Wifi Tp Link Router , Speaker , Web Camera , Seedometer , Pipe Angle Total Quantity : 41

BRR:8290125 General-Supply And Installation Of Wifi Access Points For The Courtrooms In The High Court Of Kerala-Wifi Access Points-General Electronics Work General-Supply And Installation Of Wifi Access Points For The Courtrooms In The High Court Of Kerala-Wifi Access Points-General Electronics Work

BRR:8288244 Estimate For Installation Of Cctv Cameras At Various Points Of Rsd Colony Shahpurkandi Township , 4 Mp Or Higher Ip Bullet Camera Of Reputed Make With 60 Mtrs Light Range, 2560X1920 Resolution, 4 Mm Lens, Built In Mic With Environmental Filtration , 4 Port Nvr With 4 Tb Hdd Of Reputed Make Up To 8 Mp Resolution, Video Input, Incoming 40 Mbps And Outgoing Bandwidth 80 Mbps, Hdmi Output 4 K, Hdd Capability Upto 6 Tb Or Higher , 8 Port Nvr With 6 Tb Hdd Of Reputed Make Up To 8 Mp Resolution Video Input, Incoming And Outgoing Bandwidth 80 Mbps, Hdmi Output 4 K, Hdd Capability Up To 6 Tb Or Higher , 4 U Rack With Tray And Fully Loaded With 5 Port Power Strip 5 Amp. , Utp Cable Of Reputed Make 305 Mtrs Roll 23 Awg Bare Copper 99.9%, Hdpe Insulation 1 Mm Approx., 4 Twisted Pairs , 4 Port Poe Switch Of Reputed Make Poe Ports (1000 Mbps) & 2 Uplink Ports (100 Mbps),Max. 30W Output Of Single Poe Port Poe Ports (1000 Mbps) & 2 Uplink Ports (100 Mbps),Max. 30W Output Of Single Poe Port 4 Port Poe Switch Of Reputed Make Poe Ports (1000 Mbps) & 2 Uplink Ports (100 Mbps),Max. 30W Output Of Single Poe Port , Monitor 19.5 Inch Or Higher Of Reputed Make Fhd 1920X1080, 100 Hz Refresh, 250 Nits Poe Ports (1000 Mbps) & 2 Uplink Ports (100 Mbps),Max. 30W Output Of Single Poe Port Poe Ports (1000 Mbps) & 2 Uplink Ports (100 Mbps),Max. 30W Output Of Single Poe Port , Wire Less Mouse Of Reputed Make High Power Long Distance Up To 10 Mtrs Or Higher , Ups 600 Va With 28 Ah Battery 650Va/360 Watt, 140-300 Input Voltage Range, Sine Wave , Media Convertor Transmission Speed 10/100 Mbps, Single Mode Single Fibre , Ofc 6 Core With Stay Wire Clipping With Frp Rod Oft, Loose Tube Hope, Tensile Strength 400 N Hope, Tensile Strength 400 N (A) Size 450Mm X 450Mm Inside With Rcc 455Mm X 455Mm Cover And Frame Light Duty Double Seal , Reputed Make Switch 5 Port Gigabit And Additional Extra 0.30Mtr Depth Of Inspection Chamber , Wireless Link 2 Km Distance Or Higher, Processor Atheros Mips 74Kc, 533 Mhz,64 Mb Ram, 10/100 Mbps Data Transmission , Extension Board (Two Switch & Two Socket) 533 Mhz,64 Mb Ram, 10/100 Mbps Data Transmission , Adapter 12 V 2 Amp , Copper Wire 1 Mm ( One Rolllength 90 Meter) , Installation And Commissioning Of Cameras

BRR:8285388 Bids Are Invited For Custom Bid for Services - IT Facility Management Services including comprehensive maintenance of computer hardware and network devices and system software and OFC/UTP /RF networking, help desk management and Video Conferencing System Management Annual Maintenance Services for Video Conferencing System (Software Based) Annual Maintenance Service - Desktops, Laptops and Peripherals Annual Maintenance Contract for Networking Devices (Version 2) Facility Management Services - LumpSum Based Cluster Outsourcing for Maintenance of Landline and Broadband network – OFC Network Total Quantity :

BRR:8284073 Bids Are Invited For Wireless Access Point (V2) (Q2) Total Quantity : 10

BRR:8283902 Bids Are Invited For Tablet Ultra Retina Xdr Display, 256 Gb, 12Mp Front Camera / 12Mp Back Camera, Lidar Scanner, Wi-Fi Total Quantity : 2

BRR:8283773 Bids Are invited for Gigabit Ethernet - Description , Wifi 6 Access Point - Description , Wall Mount Steel Enclosure - Description , 24 Port Cat 6 - Description , Cable Manager - Description , Rj 45 - Description , Cat6 Type Utp Cable - Description , 1 Mtr Long Lszh Cat 6 - Description , 2 Mtr Long Lszh Cat 6 - Description , 3 Mtr Long Lszh Cat 6 - Description , 25Or32 Mm Sizes Of Medium Class Pvc Conduit - Description , New Electrical Switch Board - Description Total Quantity : 962

BRR:8283076 Bids Are invited for Computer With Ups , Keyboard , Mouse , Pendrive , Wi-Fi Adopter Total Quantity : 19

BRR:8282748 Bids Are Invited For 5 Kva Ups Switching Technology Igbt Pwm, Input Voltage Ac Single Phase 160V 260V 50Hz, Output Voltage Ac Single Phase 230V 1 Percent 50Hz, Type Of Design Oblique Construction Floor Standing , Battery 12V 42Ah, Smf Vrla Conforming To Jisc 8702 Pt I, Ii And I, Stationary Lead Acid Batteries In Monobloc Container Conforming To Is 13369 1992 Latest , Iron Rack 3 Feet Into 3 Feet With 4 Layer , Mcb 40 Amp , 8 Channel Nvr Video And Audio Ip Video Input 8 Channel, Incoming Bandwidth 80 Mbps, Outgoing Bandwidth 160 Mbps, Hdmi Output 4K And 2K, Video Output Mode Hdmi Oblique Vga Total Quantity : 42

BRR:8282258 Supply Of Led Smart Tv 65 Inchled Smart Tv 65 Inch,Supply And Installation Of 65 Inch Led Smart Tv Of Maximum Resolution Of 4K Ultra Hd (3840* 2160), Display Type: Led, Speaker Audio Output - Min. 20W, Aspect Ration- 16:9, Connectivity: Hdmi- Min. 4 Nos., Usb- Min. 2 Nos., Ethernet And Wifi, Accessories, Remote Control, Mounting: Table Mount (Legs) And W All Mounting Bracket, Warranty: 3 Years Oem Warranty (Make- Samsung/Lg/Sony). Product Shall Be Accepte D From Oem Or Their Authorized Dealers Only. [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8282136 Supply Of Supply Of Wireless Router/Modem, With Oem Make And Spec Certificate, With 1 Year Warranty, Similar To Make Or Brand Of Tplinkax23-Ax1800-Dual- Band-Wifi-6/Netgear-Rax10-Ax1800/Linksys- E1200-N300 Or Better.Supply Of Wireless Router/Modem, With Oem Make And Spec Certificate, With 1 Year Warranty, Similar To Make Or Brand Of Tplinkax23-Ax1800-Dual- Band-Wifi-6/Netgear-Rax10-Ax1800/Linksys- E1200-N300 Or Better.,Supply Of Wireless Router/Modem, With Oem Make And Spec Certificate, With 1 Year Warranty, Similar To Make Or Brand Of Tplinkax23-Ax1800-D Ual- Band-Wifi-6/Netgear-Rax10-Ax1800/Linksys- E1200-N300 Or Better. [ Warranty Period: 12 Months After The Date Of Delivery ] ] => Limited

BRR:8281273 Supply Of Supplying, Installation, Testing And Commissioning Of Philips Pse0501 Or Similarsupplying, Installation, Testing And Commissioning Of Philips Pse0501 Or Similar,Supplying, Installation, Testing And Commissioning Of Philips Pse0501 Or Similar Smart Meeti Ng Wireless Conference Microphone With Sembly Meeting Assistant Specifications Microphones, Number Of Microphones: 6 Arrangement: Ring Type: Digital Silicon Microphone Sesitivity:-29 Db Sampling Rate/Samplin G Bits:48 Khz/16 Bit Recording Distance: About 6M/Up To 12 People Recording Coverage Angel: Horizontal 36 0 Signal-To-Noise Ratio:65 Db Communication Mode: Full Duplex Loudspeakers Number Of Speakers:4 Speake R Output Power: 4X5 W Battery Type: Li-Ion Capacity:5000 Mah Runtime: Up To 10 Hours Charging Time: 4 H Ours Connectivity Usb:Usb-C 2.0 Compatible With 5.8 G Wifi Dongle System Requirements Operating System : Macos 12, Windows 10 Or Later Green Specifications Compliant To 2011/65/Eu (Rohs) Lead-Free Soldered Product Operation Conditions Temperature: 5-45 C/41-113 F Dumidity: 10%-90% Dimensions And Design Pr Oduct Dimensions (Wxdxh):30X14x6.12 Cm/11.8X5.5X2.4 In Weight: 980 G/34.6 Oz Color: Dark Grey Or Simil Ar [ Warranty Period: 36 Months After The Date Of Delivery ] ] => Limited

BRR:8278829 Tender For Maintenance Of Peripheral & Printer Reefling; 1 Acer,HP,IBM, Lenovo, Hcl,Dell All in One 2 Ram(DDR-2)Ram 2 GB 10600Hz, 12800Hz 3 Ram(DDR-3)Ram 2 GB 12800Hz 4 Ram(DDR-3)Ram 4 GB 12800Hz 5 Ram(DDR-3)Ram 8 GB 12800Hz 6 Ram(DDR-4)Ram 4 GB 12800Hz 7 Ram(DDR-4)Ram 8 GB 12800Hz 8 Ram(DDR-4)Ram 16 GB 12800Hz 9 Ram(DDR-4)Ram 32 GB 12800Hz 10 Hard Disk (SATA 500 GB 7200 RPM) 11 Hard Disk 16 TB (Lacie Thunderbolt) 12 Hard Disk (SATA 1TB 7200 RPM) 13 Hard Disk (SATA 2TB ) 14 Hard Disk (SATA 4TB) 15 PCI SATA CARD 16 Processor Fan (For Dual Core) 17 Processor Fan (i3,i5,i7) 18 SMPS 450W 19 SMPS 500W 20 PCI VGA Display Card (8 MB/16 MB) 21 All in one Screen 22 Acer 22 All in One Processer i5, 12 GenerationAcer 23 All in One Processer i7, 12 Generation 24 All in One Screen 24 Acer 25 All in one Adoptor 65 volt 26 Mother Board 8 Generation 27 Mother Board 10 Generation 28 Mother Board 12 Generation 29 Power Cable 1.5 m 30 VGA Cable 10m 31 VGA Cable 20m 32 VGA Cable 1.5m 33 HDMI Cable 10m 34 HDMI Cable 30m 35 HDMI Cable 15m 36 Audio jack Cable 30m 37 Audio jack Cable 10m 38 Rs-232 Cable (1.5m) 39 Key Board USB 40 Key Board Wireless 41 Mouse USB 42 Mouse Wireless 43 ATX Cabinet with SMPS 44 ATX Cabinet without SMPS 45 DVD Writer SATA 46 Mother Board H61 47 Mother Board H91 48 Mother Board H570 49 MSI Mother Board H-760 13thGeneration 50 MSI Mother Board i7 13thGeneration 51 Processor Intel Dual Core 52 Processor Intel Core i3 12thGeneration 53 Processor Intel Core i5 12thGeneration 54 Processor Intel Core i712thGeneration 55 Presenter R-5 56 Operating System Window 11 Professional 57 M.S. Office Professional 2023 58 Graphic Card 10 gb 59 Graphic CardRx 3060 60 SSD 512 gb 61 TFT 18.5 62 TFT 20.5 63 TFT 21.5 64 HDD Cable SATA 65 SATA Power Connector 66 CMOS Battery AA, AAA 67 Wifi Network Card 68 Mouse Pad 69 USB Card 70 USB LAN Card 71 OPC DRUM (HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 72 Network Card(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 73 PCR Roller (HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 74 Chip Replacement(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 75 Wiper Blade(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 76 Doctor Blade(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 77 Printer Toner with Printer Servicing(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 78 TEFLON Paper for Laser Printer (HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 79 Pressure Roller(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 80 Fuser Unit(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 81 Gear Assembly(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 82 Paper Pickup Assembly(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 83 Power Supply Card(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 84 Logic Card(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 85 Cartridge Sensor(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 86 Scanner Unit for Laser Printer(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 87 Magnetic Rod(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 88 Laser Units(HP 1022, 108 Samsung 4521, Canon 244, HP Laser jet, Brother 7065) 89 New Cartridge(HP MFP 329) 90 Logic Card(HP MFP 329) 91 Power Supply Card(HP MFP 329) 92 Laser Unit(HP MFP 329) 93 Fuser Unit(HP MFP 329) 94 Drum Unit (Brother 7610) 95 Switch 16 Port,10/100mbps/gbps fast ethernet 96 Switch 32Port,10/100mbps/gbps fast ethernet 97 RJ 45 Connector 98 Crimping tool of RJ 45 Connector 99 Lan Card PCI 10/100 MBPS 100 Telephone Connector cable with rj 11 101 Lan Cable 100 m 102 Lan Cable 305 m 103 Wi-fi Modem + Router ADSL24-Port,8 Port 16 Port 32 Port 104 Wi-fi Router ADSL 4-Port,8 Port 16 Port 32 Port 105 Cartridge Canon Image class mf 244 106 Canon Image class mf 244 Paper Tray 107 Cartridge HP Laser jet Pro MFP 329dw All in One 108 Cartridge HP 108A 109 HP 108 A Paper Tray 110 Cartridge Brother B7640DWB 111 Paper Tray (Brother) 112 500 GB External HDDSegate/Western Digital 113 1 TB External HDD Segate/Western Digital 114 2 TB External HDDSegate/Western Digital 115 5 TB External HDDSegate/Western Digital 116 10 TB External HDDSSegate/Western Digital 117 2TBSSD Samsung 118 Computer Screen 4 K Samsung 119 External DVD WriterSamsung/HP/LG/Dell 120 Blank DVD Pack of 25 Sony/Moserbear 121 Blank DVD Pack of 50 122 Blank CD Pack of 25 123 Blank CD Pack of 50 124 HDMI Splitter 4 Port 125 VGA Splitter 4 Port 126 HDMI Splitter 8 Port 127 VGA Splitter 8 Port 128 VGA to HDMI Converter Cable 10 metre 129 VGA to HDMI Converter Cable 20 metre 130 HDMI to VGA Converter Cable 10 metre 131 HDMI to VGA Converter Cable 20 metre 132 HDMI Cable 5 metre 133 DVR 4 Channel , 8 Channel, 16 Channel 134 HDMI Cable 15 metre 135 HDMI Cable 20 metre 136 Y - Type VGA Cable 137 Blower for Cleaning Dust in COmputer 138 Cooling Fan 420 Amp 139 Wireless Mic and Set_up Machine (Dual Antenna) 140 Formatting of Computer ,Re-Installation, of OS and relevant Software 141 Servicing and Repairing of TFT Monitor (Damaged not included) 142 Motherboard Repair 143 Servicing and Repairing of CRT Monitor (Damaged not included) 144 Servicing Charge for Data Recovery 145 Antivirus Quickheal Total Security 1 User

BRR:8278093 Tender For supply installation testing and commissioning Of Led Scroll Display Signage Board For Visualization Of Toilet In C Ward In Swachha Survekshan 2025-LED Scrolling display board with Wi-Fi1.MaterialAluminium,LED,Dimensions Variable,Brightness High, Power 12V Lifespan50000 hours, Warranty 1 Year, IPrating IP65Features- Bright display, Durable, Easyinstall, Attractive design,Weatherproof,Customizable,Highvisibility, Energy efficientScrolling display board with Wi-Fi -Mobile App/pc (Red, 42 FT X 06 FT)Backlight BlackPower Requirement 200-240V

BRR:8277785 Bids Are Invited For Cluster Outsourcing For Maintenance Of Landline And Broadband Network Ofc Network - Optical Fib

BRR:8277728 Bids Are Invited For Internet Bandwidth and Replication Service - Internet Leased Line; Government Service provider; Class A; National long Distance (NLD); 512

BRR:8277664 Tender For Purchase Of Artec 3D Leo Laser Scanner , Artec 3D Leo Laser Scanner , Artec 3D Leo Laser Scanner With Artec Studio 17 3D Point Accuracy: Up To 0.1 Mm, 3D Resolution: Up To 0.2 Mm, 3D Accuracy Over Distance: Up To 0.1 Mm + 0.3 Mm/M Hd Mode, Hybrid Geometry And Texture Tracking, Geometry And Texture-Based Data Processing Algorithms, Automatic Background Removal Working Distance: 0.35 - 1.2 M, Volume Capture Zone: 160,000 Cm3, Linear Fov (H×W @ Closest Range): 244 × 142 Mm, Linear Fov (H×W @ Furthest Range): 838 × 488 Mm, Angular Fov (H×W): 38.5° × 23° Texture Resolution: 2.3 Mp, Colour Depth: 24 Bpp, Ability To Use Photo Texture Real-Time Fusion: Up To 22 Fps, 3D Video Recording: Up To 44 Fps, 3D Video Streaming: Up To 80 Fps, Data Acquisition: Up To 35 Million Points/S, 3D And 2D Exposure Time: 0.0002 S 3D: Vcsel, 808 Nm, Class 1 Laser, 2D: White 12 Led Array Position Sensors: Built-In 9 Dof Inertial System, Wireless System Without Need For A Computer. Builtin Ai For Less Post Processing Integrated 5.5 Half Hd Touchscreen Optional Wi-Fi/Ethernet Video Streaming To External Device Multi-Core Processing Using Nvidia® Jetsontm Tx2 (Quad-Core Arm Cortex-A57 Mpcore, Maxwell Gpu With 256 Cuda Cores, 1 Tflops) Interfaces: Wi-Fi, Ethernet, Internal Ssd: 512 Gb 3D Mesh: Obj, Ply, Wrl, Stl, Aop, Asc, Ptx, E57, Xyzrgb Cad: Step, Iges, X_T Measurements: Csv, Dxf, Xml Power: Built-In Exchangeable Battery, Optional Ac Power, Dimensions (H×D×W): 231 × 162 × 230 Mm, Weight: 2.6 Kg (5.7 Lb) Please Enable Macros To View Boq Information

BRR:8276949 Bids Are invited for Usb To Rj45 , Usb Cables Extender , Wire Tracker , Visual Fault Locator , Battery , Rj 45 Connector , Screwdriver Kit , Screwdriver Kit , Power Cable , Wifi Adapter , Io Ports , Keyboard And Mouse And Mouse Pad , Mouse , Volt Meter , Ethernet Extender Adapter , Mouse Pad , Cpu Stands , Usb Multi Hub Connector , Hdmi Cable , Pendrive , Unmanged Switch 8 Ports , Wifi Booster Total Quantity : 408

BRR:8276825 Bids Are Invited For 50 Mbps Internet Lease Line Connectivity For Tld-Iv Power Station , Fiber Optic Patch Cord Total Quantity : 1

BRR:8276725 Bids Are invited for Periodical Repair Maintenance And Operation Of Power Supply - Periodical Repair Maintenance And Operation Of Power Supply Equipment Dg Sets And Sub Station Equipments Ups Installed At New Power House Phase I And Phase Ii And Other Lt Ht Network At The Airport Nav Aids Site Etc Involving Repair Maintenance And Operation Attending To Complaints Fault Break Downs And Taking Rectification Action Ensuring Serviceability Satisfactory Working Condition Of The System Preventive Maintenance Of System And Maintenance Of Records Documentation Etc As Per Detailed Specification Terms And Condition Covered Under This Contract On All Days Including Sundays And Holidays , Operation And Maintenance Of Roof Top Solar Plant - Operation And Maintenance Of Roof Top Solar Power Plant Of Total Capacity 400 Kwp With Plants Of Varying Capacities Installed At Roof Tops Of Different Buildings City Side Operational Area Including Proper Cleaning Of Solar Pv Modules Tightening Of Module Mounting Structure Maintenance Of Electrical Equipment Logging Of Data Recharging Of All Sim Cards Of Wi Fi System Including Its Maintenance For Remote Monitoring Maintenance Of Lightning Arrestor System And Earthing System , Repair Of Earth Pits - Repair Of Earth Pits Including Supply Of Funnel Ci Ms Cover Plate Reducer And Masonary Work As Required And Marking With Paint On Earth Pits As Directed By Aai Complete In All Respect And Submitting Test Report To Aai , Supply Of Transformer Oil - Supply Of Transformer Oil Suitable For Transformers Ranging From 63 Kva To 2000 Kva And Conforming To Relavant Specifications , Dehydration And Filtration Of Transformer Oil - Dehydration And Filtration Of Transformer Oil At Site Including Testing The Bdv Dielectric Strength Prior And After Testing At Site Including Topping Up If Required And Submission Of Test Report Transformer Oil For Toping Up Will Be Supplied By Department , Provision Of Silica Gel , Service Charges For Locating Pin Pointing Of Faul

BRR:8276023 Bids Are Invited For Cluster Outsourcing For Maintenance Of Landline And Broadband Network €“ Ofc Network - Optical Fibre Cable; Sla Based Ofc Route Mtce Of Jorhat Ba Bsnl Assam

BRR:8275860 Bids Are Invited For Entry And Mid Level Desktop Computer , Layer 2 Access Switch (V2) , Networking / Server Rack , Fiber Media Converter , Sfp Module 10G Sfp+ , Power Board , 65 Inch Led Lfd , 20 Kva 1+ 1 Single Battery Bank , Hdmi Splitter 1 X 2 , Matrix Switcher 8 X 8 , Usb 3.0 Powered Cable 25M , Multiviewer 4 X 4 , Hdmi Fiber Convertor , Visualiser Hdmi Output , Ptz Camera 12X , Quad Speakerphone 12 Mics , Speaker 30 W Wall Mounted , Mixer 10 Channel , 21 Inch Touch Screen , 250 W Amplifier , Hydraulic Monitor Mounts , Speaker Cable , Installation And Commisionin , Interactive Panels With Cpu , Multimedia Projector (Mmp) , Ups 1 Kva , Hdmi Cable 25 M , Hdmi Cable 15M , Hdmi Cable 5M , Earthing Chemical , Cat - 6 Utp Ethernet Cable For Wifi Indoor Use (Mtnl) Total Quantity : 297

BRR:8275349 Bids Are invited for Supply Of Airmedia Receiver With Wifi With 3 Years Warranty - Description1 , Supply Wall Mount Power Pack, 24 Vdc, 1.25 A With 3 Years Warranty - Description2 , Supply Airmedia Series 3 Connect Adaptor With 3 Years Warranty - Description3 , Installation Of All The Above Items - Description4 , Testing And Commissioning Of All The Above Items - Description5 Total Quantity : 11

BRR:8275157 Bids Are invited for Bluetooth Speaker , Mobile Phone , Table 18X24 , Wifi Dongle , Usb Hub 4 Port Total Quantity : 11

BRR:8268080 Supply Of Procurement Of Materials For Uninterrupted High Speed Internet Connectivityprocurement Of Materials For Uninterrupted High Speed Internet Connectivity,Procurement Of Materials For Uninterrupted High Speed Internet Connectivity At Chambers Of A Ll Branch Officers And Renovation Of Networking At Personnel Department, Details Specifications As Per Anne Xure - A Attached [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8266665 Supply, Installation, Configuration And Testing Of The Expanded Campus Wi-Fi Network

BRR:8264369 Request For Empanelment Rfe Of Agencies As Service Providers Engaged In The Event Management And Related Services Tentage Stage Light Sound And Wifi Set Up Arrangements For Events Melas Organized By Htc For Category B

BRR:8264286 Bids Are Invited For Custom Bid For Services - Hiring Of P2p Leased Lines

BRR:8263003 Bids Are invited for Wireless Access Point- Indoor Access Point Wifi-6 - Specification Of Wireless Access Point - Indoor Access Point Wifi-6 , 24 Port Poe 2.5 G Managed Switch - Specification Of 24 Port Poe 2.5 G Managed Switch , 24 Port Poe Managed Switch - Specification Of 24 Port Poe Managed Switch , 10G Small Form- Factor Pluggable Transceiver Fiber Module - Specification Of 10G Small Form- Factor Pluggable Transceiver Fiber Module , Wlc Controller For Access Point - Specification Of Wlc Controller For Access Point , Cat 6 Utp Cable - Specification Of Cat 6 Utp Cable , Cat 6A Cable Lszh - Specification Of Cat 6A Cable Lszh , Patch Cord 0.5 Meter Length - Specification Of Patch Cord 0.5 Meter Length , 9U Rack - Specifiaction Of 9U Rack , Rj45 Utp Connector Or Plug For Cat 6 Cable - Specification Of Rj45 Utp Connector Or Plug For Cat 6 Cable , Monitor 24 Inch - Specification Of Monitor 24 Inch , Online Ups 5Kva - Specification Of Online Ups 5Kva , Cctv Bullet Camera Full Color 4Mp - Specification Of Cctv Bullet Camera Full Color 4Mp , Flap Barrier For Security At Girls Hostel Gate With Accessories And Installation - Specification Of Flap Barrier For Security At Girls Hostel Gate With Accessories And Installation Total Quantity : 1159

BRR:8262830 Bids Are invited for Usb Blockers Fifty Pack - Fifty Pack , Imageking Toner - Na , Sublimation Printing Machine With Assesary - Na , Sim Card Router - Na , Wifi Modem - Na Total Quantity : 6

BRR:8262621 Bids Are Invited For Facility Management Services - Lumpsum Based - Pm Shri Jawahar Navodaya Vidyalaya; Enhancement Of School Facilities And Aesthetics, Atal Lab Material Procurement And Setup And Atal Lab Materials And Digital Software Hardware Internet Facility Victory..

BRR:8262416 Bids Are Invited For Layer 2 Access Switch (V2) , Cat - 6 Utp Ethernet Cable For Wifi Indoor Use (Mtnl) , Cat 6 Patch Panel (V2) , Fiber Optic Patch Cord , Networking / Server Rack Total Quantity : 7211

BRR:8292359 Bids Are Invited For Annual Maintenance Service -Data Center Assets - Renewal Of Existing Red Hat Operating System Licenses For The Erp&It Data Center Powergrid; Operating System Software; Oem Authorised Service Provider

BRR:8284969 Bids Are Invited For Custom Bid For Services - O&M Of 20 Tpd Co2 Capture Plant At Vindhyachal For Three Months Operation & Maintenance of Data Centre Assets Annual O&M Contract of 1 year period for 20 TPD CO2 Capture Plant NTPC Vindhyachal Total Quantity :

BRR:8284256 Bids Are Invited For Annual Maintenance Service -Data Center Assets - Comprehensive Annual Maintenance Contract (Inclusive Of Consumables) For Hp Enterprises Proliant Dl380p Servers; Computer-Servers; Oem Authorised Service Provider

BRR:8283484 Bids Are Invited For Operation & Maintenance Of Data Centre Assets - Enterprise; Tier-2

BRR:8276861 Bids Are Invited For Annual Maintenance Service - Desktops, Laptops And Peripherals - Service Engineer; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Desktop Pc; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laptop; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - All In One Pc; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Laserjet Printer Colour And Black And White; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Mfp Laserjet Heavy Duty Printer; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Scanner Heavy Duty; Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups (Online 10 Kva); Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups (Online 5 Kva); Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups (Online 11 Kva); Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Ups( Offline 1 Kva); Other , Annual Maintenance Service - Desktops, Laptops And Peripherals - Data Center Assets - Computer, Blade-Server; Blade-Server

BRR:8276584 Bids Are invited for Rack Mount, Security And Environmental Appliance Integrated Sensing - Rack Mount, Security And Environmental Appliance Integrated Sensing, Access Control And Advanced Alerting For It Environments Of All Sizes, From Single-Rack Edge Network To Large Data Centers , Power Accessories - Power, Accessory,Universal 24Vdc Output , Wired Universal Sensor - Wired Universal Sensor With Cable Length And Rj45 Connection , Rack Mount, Pod Rack Sensor - Rack Mount, Pod Rack Sensor, Designed For Rack Mounting Installations , Wired, Sensor,Detect Early Warning Signs Of Fluid - Wired, Sensor, Detect Early Warning Signs Of Fluid In Your Data Center Or Network Closet & Wired Universal Sensor With 15 Feet Cable Length And Rj-45 Connection , Visible Alarm Signal - Visible Alarm Signal For Critical Personnel Alerts & Extendable Length, Using An Rj-45 Coupling And Standard Cat- Cabling , Early Warning Signs Of Smoke And Fire - Detect Early Warning Signs Of Smoke And Fire In Your Data Center Or Network Closet Sensor Supplements Existing Building Life Safety Systems Already In Place , Services - Hardware On-Site Configuration , Centralized Monitoring - Centralized Monitoring - Unified View Of Connected Devices In Your Data Center,License, Digital, Perpetual, Virtual Machine Activation , Software Support - 2 Year Vm Software Support , Data Center Management Software Configuration Suite , Service, Customzation, Ddf Creation - Service, Customzation, Ddf Creation, For Single Ddf As Per Customer Environment. Total Quantity : 32

BRR:8264907 Bids Are Invited For Custom Bid For Services - Operation & Maintenance Of Canteens At Power House Khep Canteen Service - Percentage Model Operation And Maintenance Of Substation Operation And Maintenance Of Switchyard Operation And Maintenance Of Lifts (Elevators) Operation And Maintenance Of Gas Compressor Station Operation And Maintenance Of Water Supply Systems Operation & Maintenance of Data Centre Assets Operation And Maintenance Of Fire Alarm System Operation and Maintenance of Effluent/Sewage Treatment Plant Operation and Maintenance Services of Power Generator(DG-Set) Operation and Maintenance Power House / Power Plant Total Quantity :

BRR:8264154 Bids Are Invited For Hiring Of Consultants - Milestone/Deliverable Based - Consultant For End-To-End Assistance In Selection Of Co- Location Service Provider For Relocation Of Data Centre And Near Data Centre At Bengaluru And Establishment Of New Near Disaster Recovery Ce..

BRR:8293011 Bids Are Invited For NCN-9U Rack 12651 Ref Tech Spec Sr No 10NCN-L3 Switch Tejas TJ 1400 12651 Ref Tech Spec Sr No 20NCN-TMFOC 400M 12651 Ref Tech Spec Sr No 30NCN-Cisco Video Phone 8800 Series 12651 Ref Tech Spec Sr No 40NCN-Cisco IP Phone 7800 Series 12651 Ref Tech Spec Sr No 50NCN-VC Equipment Room Kit 12651 Ref Tech Spec Sr No 60NCN-Passive Components 12651 Ref Tech Spec Sr No 70NCN-Next Generation Firewall 12651 Ref Tech Spec Sr No 80NCN-Optical Termination Box OTB 12651 Ref Tech Spec Sr No 90NCN-LIU O6 Port 12651 Ref Tech Spec Sr No 100NCN-UPS And Accessories 12651 Ref Tech Spec Sr No 110Services Of Engineers - Connectorisation 12651 Ref Tech Spec Sr No 120STW Setting To Work 12651 Ref Tech Spec Sr No 130Trials 12651 Ref Tech Spec Sr No 140Training 12651 Ref Tech Spec Sr No 150Services Of Engineers - Warranty 12651 Ref Tech Spec Sr No 160NCN-OBS-CAT 6 STP Cable With LFH 12651 Ref Tech Spec Sr No 170NCN-OBS-2 Port IO 12651 Ref Tech Spec Sr No 180NCN-OBS-1 Mtr UTP Patch Cord 12651 Ref Tech Spec Sr No 190NCN-OBS-Optical Power Meter 12651 Ref Tech Spec Sr No 200NCN-9U Rack 12652 Ref Tech Spec Sr No 210NCN-L3 Switch Tejas TJ 1400 12652 Ref Tech Spec Sr No 220NCN-TMFOC 400M 12652 Ref Tech Spec Sr No 230NCN-Cisco Video Phone 8800 Series 12652 Ref Tech Spec Sr No 240NCN-Cisco IP Phone 7800 Series 12652 Ref Tech Spec Sr No 250NCN-VC Equipment Room Kit 12652 Ref Tech Spec Sr No 260NCN-Passive Components 12652 Ref Tech Spec Sr No 270NCN-Next Generation Firewall 12652 Ref Tech Spec Sr No 280NCN-Optical Termination Box OTB 12652 Ref Tech Spec Sr No 290NCN-LIU O6 Port 12652 Ref Tech Spec Sr No 300NCN-UPS And Accessories 12652 Ref Tech Spec Sr No 310Services Of Engineers - Connectorisation 12652 Ref Tech Spec Sr No 320STW Setting To Work 12652 Ref Tech Spec Sr No 330Trials 12652 Ref Tech Spec Sr No 340Training 12652 Ref Tech Spec Sr No 350Services Of Engineers - Warranty 12652 Ref Tech Spec Sr No 360NCN-OBS-CAT 6 STP Cable With LFH 12652 Ref Tech Spec Sr No 370NCN-OBS-2 Port IO 12652 Ref Tech Spec Sr No 380NCN-OBS-1 Mtr UTP Patch Cord 12652 Ref Tech Spec Sr No 390NCN-OBS-Optical Power Meter 12652 Ref Tech Spec Sr No 400NCN-9U Rack 12653 Ref Tech Spec Sr No 410NCN-L3 Switch Tejas TJ 1400 12653 Ref Tech Spec Sr No 420NCN-TMFOC 400M 12653 Ref Tech Spec Sr No 430NCN-Cisco Video Phone 8800 Series 12653 Ref Tech Spec Sr No 440NCN-Cisco IP Phone 7800 Series 12653 Ref Tech Spec Sr No 450NCN-VC Equipment Room Kit 12653 Ref Tech Spec Sr No 460NCN-Passive Components 12653 Ref Tech Spec Sr No 470NCN-Next Generation Firewall 12653 Ref Tech Spec Sr No 480NCN-Optical Termination Box OTB 12653 Ref Tech Spec Sr No 490NCN-LIU O6 Port 12653 Ref Tech Spec Sr No 500NCN-UPS And Accessories 12653 Ref Tech Spec Sr No 510Services Of Engineers - Connectorisation 12653 Ref Tech Spec Sr No 520STW Setting To Work 12653 Ref Tech Spec Sr No 530Trials 12653 Ref Tech Spec Sr No 540Training 12653 Ref Tech Spec Sr No 550Services Of Engineers - Warranty 12653 Ref Tech Spec Sr No 560NCN-OBS-CAT 6 STP Cable With LFH 12653 Ref Tech Spec Sr No 570NCN-OBS-2 Port IO 12653 Ref Tech Spec Sr No 580NCN-OBS-1 Mtr UTP Patch Cord 12653 Ref Tech Spec Sr No 590NCN-OBS-Optical Power Meter 12653 Ref Tech Spec Sr No 600NCN-9U Rack 12654 Ref Tech Spec Sr No 610NCN-L3 Switch Tejas TJ 1400 12654 Ref Tech Spec Sr No 620NCN-TMFOC 400M 12654 Ref Tech Spec Sr No 630NCN-Cisco Video Phone 8800 Series 12654 Ref Tech Spec Sr No 640NCN-Cisco IP Phone 7800 Series 12654 Ref Tech Spec Sr No 650NCN-VC Equipment Room Kit 12654 Ref Tech Spec Sr No 660NCN-Passive Components 12654 Ref Tech Spec Sr No 670NCN-Next Generation Firewall 12654 Ref Tech Spec Sr No 680NCN-Optical Termination Box OTB 12654 Ref Tech Spec Sr No 690NCN-LIU O6 Port 12654 Ref Tech Spec Sr No 700NCN-UPS And Accessories 12654 Ref Tech Spec Sr No 710Services Of Engineers - Connectorisation 12654 Ref Tech Spec Sr No 720STW Setting To Work 12654 Ref Tech Spec Sr No 730Trials 12654 Ref Tech Spec Sr No 740Training 12654 Ref Tech Spec Sr No 750Services Of Engineers - Warranty 12654 Ref Tech Spec Sr No 760NCN-OBS-CAT 6 STP Cable With LFH 12654 Ref Tech Spec Sr No 770NCN-OBS-2 Port IO 12654 Ref Tech Spec Sr No 780NCN-OBS-1 Mtr UTP Patch Cord 12654 Ref Tech Spec Sr No 790NCN-OBS-Optical Power Meter 12654 Ref Tech Spec Sr No 800 Total Quantity : 616

BRR:8292902 Bids Are Invited For Manpower Outsourcing Services - Fixed Remuneration - It- Technical; Network Administrator; Engineering Graduate Or Mca Or Mit Or Diploma In Mcse Or Ccna Or Ccnp Or Mcp , Manpower Outsourcing Services - Fixed Remuneration - It- Technical; Server Administrator; Engineering Graduate Or Mca With Experience In Management Of Server And Having Working Knowledge Of Various Os , Manpower Outsourcing Services - Fixed Remuneration - It-Technical; Tech Lead/Data Monitoring Analyst; Engineering Graduate Or Mca Or Mit With Experience In Data Monitoring Analyst Or Cyber Security , Manpower Outsourcing Services - Fixed Remuneration - It-Technical; Network Engineer; Engineering Graduate Or Polytechnic Diploma Engineers In It Or Computer Science Or Electrical Or Electronics Or Graduate With Ccna Or Ccnp Cisco Or Mcp Or Mcse , Manpower Outsourcing Services - Fixed Remuneration - It-Technical; Hardware Engineer; Degree Or Diploma Or Certificate In Computer Hardware Or It In Computer Engineering , Manpower Outsourcing Services - Minimum Wage - Highly- Skilled; Diploma Or Certificate Course In Audio Visual Technology; It-Technical , Manpower Outsourcing Services - Minimum Wage - Highly-Skilled; Graduate Engineers In It Or Computer Science With Experience In Software Management In A Reputed Organization; It-Technical Total Quantity :

BRR:8292788 Bids Are invited for Cpu , 24 Inch Tft Monitor , 8 Port Ip Router , 24 Port Lan Switch , Dot Matrix Printer , 8 Port Voip Switch , Telephone Instruments , Multi Function Printer , Single Port Rj45 Ethernet Surge Protector , Cat 6 Cableroll , Multi Media Speaker Sets , Serial To Ip Converters , Firewall Total Quantity : 344

BRR:8292130 Bids Are Invited For Amc Of Integrated Security And Surveillance System - Remote Video Monitoring, Cwan And Cctv Surveillance; Comprehensive; Hardware, Software, Wireless System, Networking System, License, Firewall And Cctv System; Consumables To Be Provided By Service ..

BRR:8292029 Bids Are Invited For Endpoint Detection And Response (Edr) Appliance / Software (Q2) ( Pac Only ) Total Quantity : 850

BRR:8291969 Bids Are Invited For Static Application Security Testing (Sast) Tool (On Premises) Total Quantity : 350

BRR:8290927 Bids Are Invited For Cyber Security Audit - Security And Compliance Audit

BRR:8290760 Bids Are Invited For Hiring Of Professionals For Cloud, Network And Security - As Per Atc Of Bid; As Per Atc Of Bid; As Per Atc Of Bid

BRR:8290630 Bids Are Invited For Custom Bid For Services - Renewal Of License For Xgs 87 Firewall Xstream Protection For 3 Years

BRR:8289651 Supply Of Lcd Ultrasonic Thickness Gauge & Probe Utm 9 Ultrasonic Thickness Gaugelcd Ultrasonic Thickness Gauge & Probe Utm 9 Ultrasonic Thickness Gauge,Lcd Ultrasonic Thickness Gauge, Measurement Range: 1.2-225 Mm. [ Warranty Period: 30 Months After The Date Of Delivery ] ] , Probe Utm 9 Ultrasonic Thickness Gauge , Probe - 5Mhz, 10Mm Diameter & Measurem Ent Range - 0 To 500Mm [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8284528 Bids Are Invited For Endpoint Detection And Response (Edr) Appliance / Software Total Quantity : 5000

BRR:8284498 Bids Are Invited For Vulnerability And Penetration Testing- VAPT for the Network assets and IT assets deployed for CISF Officials at Chennai Airport

BRR:8284367 Bids Are Invited For Vulnerability And Penetration Testing - Network; Security Infrastructure Review; Vulnerability Addressing

BRR:8283050 Bids Are Invited For Cyber Security Audit - Security And Compliance Audit

BRR:8282798 Bids Are Invited For High End Desktop Computer , Fixed Computer Workstation , Network Printer Mfd Colour , Network Attached Storage Nas , Switch , Firewall , 1Kva Line Inetractive Ups Total Quantity : 31

BRR:8280883 Supply Of Tefc Slip Ring Induction Motor Foot Mounted.Tefc Slip Ring Induction Motor Foot Mounted.,Tefc Slip Ring Induction Motor Foot Mounted Capacity- 3.5 Hp With Following Spe Cification 3 Phase Supply Voltage- 415V, 50 Hz Frame Size- Dw 132 S, 960 Rpm Duty S 4, Ip- 55 Pro Tection Standard Class F Insulation With Temperature Rise Limited To Class B Suitable For A Mbient 50 Degree Centigrade Make/Brand- Cg Power Industrial Solution Ltd/Kirloskar/Abb/Siem Ens Or Similar [ Warranty Period: 30 Months After The Date Of Delivery ] ]

BRR:8279897 Annual Ash Compliance Audit At Ntpc Talcher Kaniha For Fy 2024 25 In Compliance To Meef And Cc Notification => Limited

BRR:8277073 Bids Are invited for Io Information Outlet , Dual Face Plate With Back Box , 24 Port Patch Pannel Loaded , 6 Port Liu Fully Loaded Sm , 12 Port Liu Fully Loaded Sm , 24 Port Liu Fully Loaded Sm , Fiber 24 Core Sm Cable , Fiber 12 Core Sm Cable , Fiber Sm Patch Cards 2 Mts , Cat 6 Patch Cards 1M , Cat 6 Patch Cards 2M , Cat 6 Cable , Layer 3 Switch With 3 Yrs Warranty , 24Port Sfp And 4Port Sfp56 Switch , Transceivers For Firewall Connectivity10g Sfp Lc Sr 300M Om3 Mmf Transceiver , Transceivers For Wlc Connectivity1g Sfp Rj45 100M Cat5e Transceiver , Transceivers For All Racks Connectivity10g Sfp Lc Lr 10Km Smf Transceiver , 48 Port Poe Switch With 3 Yrs Warranty , 48G Class4 Poe 4Sfp 740W Switch With 3 Years Warranty , 10G Sfp To Sfp 1M Direct Attach Copper Cable , 24 Port Poe Switch With 3 Yrs Warranty , 24G Class4 Poe 4Sfp370w Switch , 10G Sfp To Sfp1m Direct Attach Copper Cable , 12 Port Poe Switch With 3 Yrs Warranty , 12G Class4 Poe 2G 2Sfp 139W , Wlc With 3 Yrs Warranty , 12 Gbe 6 Poe Branch 2K Clients 32 Aps Gateway With 3 Yrs Warranty , Lic Ap Controller Per Ap Capacity License E Ltu , Ic Pef Controller Policy Enforcement Firewall Per Ap License E Ltu , Lic Rfp Controller Rfprotect Per Ap License E Ltu , Access Pointstype1 With 3 Yrs Warranty , Access Pointstype 2 With 3 Yrs Warranty , Nacaaa With 3 Yrs Warranty , Next Gen Firewall , 42U Rack Frame 800 1000 Steel Nrs Ckd Casters Type 3 Black , 6U 600 Rack Welded Wm Off White , 9U 600 Rack Weldedwm Off White , 12U 600 Rack Welded Wm Off White Total Quantity : 13719

BRR:8277054 Bids Are invited for Optimux 4E1 4Eth 20 Km , Otdr , Nas 32Tb , Ssd 1Tb Sata , Firewall , Quad Core Processor E2224 , Laptop Corei5 12Th Gen 16 Gb 512Gb Win 11 , Switch 8 Port Total Quantity : 14

BRR:8277051 Bids Are invited for Utp Plus License For 3 Years , Exchange Server 2019 Std , Seqrite End Point Security Enterprise Suit 2 Years , Ms Office 2021 Home Business , Ai Video Editor Software Total Quantity : 318

BRR:8277020 Bids Are Invited For Hiring Of Agency For Iso Certification Service - Iso 27001 - Information Security Management System (Isms); Consulting, Initial Audit, Surveillance Audit, Re-Certification Audit; Workshop On Awareness Of Iso Certification For Employees, Guidance For .. Total Quantity :

BRR:8276647 Bids Are Invited For Custom Bid For Services - Ccr Xdr 201 Heater Bundle Refurbishment

BRR:8275884 Bids Are Invited For Vulnerability And Penetration Testing - Network; Secure Configuration Review (Devices/Os), Security Infrastructure Review, Data Communications And Network Control Review; Vulnerability Addressing, Plug-In Solution To Be Recommended

BRR:8275555 Bids Are Invited For Cyber Security Audit - Security And Compliance Audit

BRR:8272011 Bids Are Invited For 1600570966 Motor Induc 0.7 415 80M 1La908 Siem T , 1600570967 Motor Induc 5.5 415 132S 1Le100 Siem T , 1600570968 Motor Induc 3 415 100L 1Le100 Siem T , Induction Motor As Per Is 12615, Is 325 Hydraulic Motors Total Quantity : 3

BRR:8266231 Tender For E- Tender For A17endpoint Protection Solution (Epp With Antivirus And Dlp) - Endpoint Protection Solution Antivirus Licenses for 3 Years.(Protects 400 endpoints) 2 DLPESubscription for 3 years per endpoint, advanced data protection (Protects sensitive data on 400 endpoints) 3 Enterprise virtualization server2U Rack, Up to 2× Intel Xeon 6th Gen (up to 64 cores), Up to 128 GB DDR5 RAM, Up to 24 × SFF or12× LFF NVMe/SAS/SATA 4 Windows Server 2022 StandardCore-based (16-core pack), 2 VMs per 16-core license total 32 cores. 5 Implementation, Configuration and Training at Head Office & All Branches and Onsite Support for Three Years. 6 Terms and Conditions:1. Payment Terms: 100% payment after successful Installations.2. Support: Bidder will provide onsite support for EPP with Antivirus & XDR

BRR:8264754 Bids Are Invited For All In One Pc (V2) , Mfp Printers , Scanner , Extra Monitor Plus Hdmi Splitter , Ups 500 Va , Lan Nodes , Display Monitor , Digital Signature Token , Server-2 U Rack , Firewall , Microphone Cum Speaker , Ptz Camera , Display Unit , Ups 1000 Va Total Quantity : 1309

BRR:8264620 Bids Are Invited For Supply And Installation Of Enterprise Grade Next Generation Firewall In Ha Mode , Networking / Server Rack Total Quantity : 1

BRR:8264102 Bids Are Invited For Upgradation Of The Existing Radial Compressor Axstream Software For Design And Development Of The Ac , Endpoint Detection And Response (Edr) Appliance / Software Total Quantity : 1

BRR:8263467 Bids Are Invited For Cyber Security Audit - Security And Compliance Audit

BRR:8263189 Bids Are Invited For Cyber Security Audit - Security And Compliance Audit

BRR:8263174 Bids Are Invited For Comsol Multi-Physics Software , Language / Multilingual Software Foreign Language Software Multi Factor Authentication Software Total Quantity : 1

BRR:8263119 Bids Are Invited For Endpoint Detection And Response (Edr) Appliance / Software (Q2) Total Quantity : 140

BRR:8263085 Bids Are Invited For Integrated Security Surveillance System Service - Remote Video Monitoring, Theft Prevention, Outdoor Perimeter Security; Network Attached Storage, Recording Devices; High Media Quality, Maximum Security Footage; Buyer’S Premises; Mandatory Access Con..

BRR:8262374 Bids Are Invited For Desktop I5 8Gb 512Gb 24 Inch , Aio I5 8Gb 512Gb 24 Inch , Desktop I7 16Gb 1Tb 24 Inch , Desktop I7 16Gb 2Tb 27 Inch 6Gb Gf Card , Single Function Printer A3 Colour , Colour Printer With Scanner Ink Tank , Black And White Printer With Scanner , Printer A4 Laser Duplex B And W , Mfp Printer , Mfd Printer , Ups 6Kva With Battery , Ups 1Kva , Qnap Nas Drive With 16Tb , Cat6 Cable Low Smoke Halogen Cable , L2 Switch 24 Port , Firewall 100 User , Network Rack Loaded , Cat 6 Information Outlet Io Box , Conduit , Rj45 Tester And Tool , Nikon Camera With Card Z50 Total Quantity : 167

BRR:8283585 Bids Are Invited For Autodesk Revit And Collaborate Pro360 , Antivirus Software Total Quantity : 1

BRR:8276008 Bids Are invited for All In One Pc , Laptop , Printer , Vc , Ups , Antivirus , Pendrive Shredder Total Quantity : 30

BRR:8275691 Bids Are Invited For Security And Protective Software Including Antivirus Total Quantity : 25

BRR:8275400 Bids Are Invited For 1 SFTP Server 2 Windows Server 2025 3 Network Attached Storage NAS 4 Monitor 32 inches Curved 5 Antivirus 6 Desktop PC i9 with Monitor 7 Multi Function Printer 8 Wireless Keyboard and Mouse 9 Speaker 10 Visual Presenter 11 Monitor 32 inches 12 Delivery and Installation Total Quantity : 43

BRR:8275261 Bids Are invited for Window 10 Pro Key Licence With Cd Single User Bios , Window 11 Pro Key Licence With Cd Single User Bios , Ms Office 21 Key With Cd , Ms Office 19 Key With Cd , Anti Virus Quick Heal Total Security 1 Yrs For 5 Users Total Quantity : 28

BRR:8270839 Bids Are invited for Drone Simulator Software , Qc Mission Planer , Anti Virus 10 User , Beta Flight Software , Filmora Software Total Quantity : 10

BRR:8262860 Bids Are Invited For Facility Management Services - Lumpsum Based - Panagarh Military Cantt; Antivirus Quickheal For 3 Years 10 Users (3 Nos); Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) , Facility Management Services - Lumpsum Based - Panagarh Military Cantt; Operating System Windows 11 (19 Nos); Consumables To Be Provided By Service Provider (Inclusive In Contract Cost) , Facility Management Services - Lumpsum Based - Panagarh Military Cantt; Ms Office Standard 2024 (17 Nos); Consumables To Be Provided By Service Provider (Inclusive In Contract Cost)

BRR:8262610 Bids Are Invited For Quick Heal Antivirus 1 User For 3 Years With Full Security Offline And Online Total Quantity : 8

BRR:8294850 Supply Of Supply Installation And Commissioning Of Computerized (Automated) Distributor Valvesupply Installation And Commissioning Of Computerized (Automated) Distributor Valve,Supply Installation And Commissioning Of Computerized (Automated) Distributor Valve (Dv) E Ndurance Test Bench ( For All Make) With Digital Pressure Gauge And Timers And Pc Based Data Acquisition System As Per Annexure-A And Drawing No.- G/Sd 8-260 Attached. [ Warranty Period: 24 Months After The Date Of Delivery ] ]

BRR:8293948 Surveying, Soil investigation, design and Supply of all materials, labour, T&P etc. complete required for completion of following works of Augmentation & Strengthening of Kumarganj Nagar Panchayat Water Supply Scheme on turn- key basis: i) Construction/ Repairing of Over Head Tank, Pump house, Boundary wall, staff quarter, gate, Site development. ii) Laying & Jointing of rising main, distribution system. iii) Construction of New/ Rebore tube wells including PLC SCADA automation of all tube wells as per specifications in tender document complete in all respect. The scope of work includes commissioning, testing, trial & run, defect liabilities and handing over the complete works to Kumarganj Nagar Panchayat, District- Ayodhya

BRR:8292834 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Plc System; Rockwell Automation India Private Limited; Annual Maintenance Contract (Amc); Quarterly; Yes Preventive Maintenance for Rockwell make PLC /SCADA system for Fire Pump House & Foam Pump House of BTPS-A Emergency Maintenance Contract for Rockwell make PLC /SCADA system for Fire Pump House & Foam Pump House of BTPS-A Total Quantity :

BRR:8286725 Tender For Conservation And Repair To Siddhivinayak Temple At Siddhatek, Tal Karjat, Dist. Ahilyanagar- 1 Dismantling the R.C.C. Work 1:2:4 and sorting out the materials such as steel etc. as directed and stacking them within the specified lead as directed etc. complete. 2 Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts, complete. 3 Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 4 Raking out cement or lime pointing or any other hard material used and repointing to walls externally and internally in lime mortar 1:3 (1 lime, 3 sand, mix to be approved by consultants before application) & filling in any holes/damage area of stone that may have to be filled in lime mortar. The cost to include preparation of batches of sample upto 20 samples of colour matched lime mortar for approval by Architect. The contractor to ensure use of making tape and sharp specialzed spatula & tools to ensure clear line and high level of workmanship on site. 5 Removing iron pipe raling having wooden R.C.C. or C.C. or iron post and stacking the materials as directed etc. complete 6 Specialised stone cleaning to remove oil or emulsion paint, stains or dark patches from surface of stone with paper pulp, chemicals, thinners, solvents, or soft Teepol type soap solution or by pressure jet machine. Plain paper mixed with lemon juice and caustic soda for making paper pulp . apply the paper pulp to surface which is need to be clean and remove it after paint removed from surface, apply again , if paint not removed in first attempt .ame shall be provided and will be paid under relevant item) 7 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 0.00 to 1.50 m.) By Manual Means. 8 Excavation for foundation in hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5to 3.0m) By Manual Means 9 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 10 Providing and laying cast in situ 1:2:4 Lime Concrete of trap/ granite/ quartzite/ gneiss metal for foundation and bedding as per detailed specifications and drawings or as directed including bailing out water, centring, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required with fine aggregate, preparing the lime mortar in lime miller and then mixing with coursed aggregate in drum mixer as per specifications including bailing out water, watering etc. complete. 11 Stabilization of Soil or Sub-Base/ Base Course or Existing Pavement Crust upto the required depth by In-Situ Stabilization method using Cement /Cementitious additives/ Chemical additives /Combination:- Providing and pre-spreading of Binder (Cement/Cementitious additives/ Chemical additives/ combination) at rate of required quantity (%byweight) as per job mix design in accordance with IRC37-2018 using a truck-mounted automated binder spreader with micro-process or controlled weighing and spreading system. The binder spreader shall have variable working width upto 2.4 m to efficiently manage the width of the whole pavement.T he in-situstabilization process shall be carried out using a self-propelled wheeled Stabilizer/ Reclaimer with a minimum working width of 2 mor 2.4m and minimum engine horse power of 305k Whaving in-built automated water-spraying and depth control systems with variable working depth of upto 500mm.The entire in-situ process shall be carried out in a single pass in cluding pulverizing of soil/ aggregates/ combination or millin go f existing as phalt pavement and simultaneous mixingwithpre-spreadbinder (cement/additive) and water to the desired depth.There s ultantstabilized mix shall be compacted using a vibratory pad foot compactor of14-20 tonne weight as per designd e pth and then graded to ther equired profile, levela nd thickness usingamotor grader.The graded surface shall be then compacted usinga smooth vibratory roller to achieve the desired proctor density as per IRC37-2018 and complete in all respects including curing with water as required including all materials,labor,machinery,etc.Necessary graded stone aggregates shall be added by pre-spreading with cement to achieve desired gradation and profile of the road.The minimumun confined compresssive strength(UCS) of stabilized sub-base should be 4.5/7M P aafter 7/28 day scuring as per IRC37-2018.Also,durability aspects(wet-drycycles) of stabilized sub base should besatis fied as perIRC37-2018.The gradation mixes and materials should be as per IRC 37-2018. As directed byEngineer incharge One Cubic Metre 3627 Page 12 Filling in plinth and floors with excavated material in 15 cm . To 20 cm. layers including watering and compacting etc. complete. 13 Providing and laying insitu/ readymix M-30 controlled reinforced cement concrete of trapmetal for raft slab includingVhaunches,formwork,scaffolding,compactionbyvibrating,finishingcuringetc.complete.concrete batch mixplant /pan mixer with fine agreegates of required specifications (VSI sand finely washed etc) etc.complete.(excluding reinforcement). a) RCC Grade with reversible drum type mixer/ concrete batch mix plant (pan mixer). 14 Providing Lime Pointing to stone work in lime mortar 1:1 in superstructure, as per detailed specifications and drawings or as directed including all face or visible work shall be pointed, unless otherwise specified and shall be done while the mortar is fresh, the mortar shall consists of lime and fine sand shall not be ground fine but sand should be finer, the joints of the pointed work shall be neatly defined by the pointing, the lines shall be regular and uniform in breadth and the joints shall be raised or flat as may directed, preparing the lime mortar with 640 gram pulp of wood apple (Belfruit) per cubic metre of lime mortar as a bonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete 15 Providing & fixingBlack basalt stone of first sort flooring ,Minimum size of stone (0.45 x 0.30) M. as per design & detailed drawing & size, from approved source of & quality, including transportation & conveyance to specific location, layingat a slope of 1 : 40 in line, level over layer of 20 mm. thick 1 : 1 lime mortar, with joints not exceeding 3 MM thick, specialadhesive material like araldite, adding Bonding ingredients like Bel fruit (30Kg), Black Gur (jaggery)(20Kg) and other materials as per requirement against the quantity of lime mortar of 1.00 Cu.M, etc. with watering, curing, etc. complete. The sides of the stone are to be dressed true and square for atleast half the depth from the face, and the joints shall be set in lime for 1 in from face. 16 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite/quartzite/ gneiss metal for R.C.C.work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steelstanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC withSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade 17 Providing and laying Cast insitu / Ready Mix cement concrete in M-25 of trap /granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible DrumTypemixer / concrete Batchmixplant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 18 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 19 Providing and fixing corrugated galvanised Iron sheet of 0.63 mm thick (24B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). 20 ProvidingandfixingCountry(Half-round)single-tiledRoofing,asperdetailedspecifications and drawings or as directed over corrugated G.I. sheet roofing,theroofcovering tobeconsistsofa single layer sound well-burnt half-round country tiles of uniform colour and size, free from flaws and defects, the tile to ring clearly when struck together, they should be so turned as to allow of an overlap of at least 75 mm.(3″) and should be carefully and truly laid at right angles to the eaves, the tiles must about closely at the ridge, scaffolding etc. complete. 21 Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone size (0.40*0.40*0.70) M. in plinth (Talkhada) as perdetailed specifications and drawings or as directed includingthe stones be of approved quality, colour, hard and free from defect of any kind, dressing everystones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curvesor twists if required, the stones shall be set in fine mortar, the beds or joints being in no case morethan 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″) in heightaveraging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the limemortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 22 Providing and fixing Ist quality (Superior Quality) Indian Teakwood in structural members likeBeams and columns, wooden membersof size (10 inch x 10 inch x 157 inch) etc. including removing damage or decayed wood members, fixing stainless steel screws, cutting, sawing, making proper wood joinery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete (It is mandatory to use 1st quality seasoned teak wood) 23 Teakwood in kadipat ceiling, wall cladding,flooring : Providing and fixing Ist quality (Superior Quality) Teakwood in kadipat ceiling, wall cladding,flooring or any other wooden members etc. including removing damage/decayed wood members,fixing stainless steelscrews, cutting, sawing,making groove, making rounding on edges if required, making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete. For wood size = 9 x 1.5 to 10 x 1.5 24 Providing and applying melamine polish of required finish to the woodwork by spraymachine including knotting and preparing the even surface by scrapingapplyingFrench polish , scaffolding if required etc. complete. Note: The work to be executed on prior approval of Superintending Engineer will benecessary. 25 Providing, laying and fixing P.V.C.pipe of 110mm.dia.with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the sameinPWD chowky or as directed etc. complete. 26 ProvidingandfixingTeak wood Eaves Board 15cm.(6″)wide and25mm.(1″)thick, asper detailed specifications and drawings or as directed including the planks to be best Moulmein teak to be 25 mm. (1″) thick and 15 cm.(6″) in width, of a uniform colour and planed, the planks to be laid truly parallel to the floor so as to cover the end rows of the tiling and to be fixed with screws of the proper length driven countersunk, all joints to be neat and close, scaffoldingetc. complete. 27 Providing Ashlar Fine Masonry of trap / granite stones in lime mortar 1:1 with size of stone 0.3m x 0.3m x 0.6m. in superstructureas per detailed specifications and drawings or as directed including the stones be of approved quality, colour, hard and free from defect of any kind,dressing every stones fine tooled on all beds, joints and faces, full true if the surface are plane or to uniform curves or twists if required, the stones shall be set in fine mortar, the beds or joints being in no case more than 3 mm. (⅛″), the stone shall be laid in regular course not less than 30 cm. (12″)in height averaging 4½ c. ft., the face stone shall be laid header and stretcher alternately, preparing the lime mortar in lime miller, scaffolding, wateringandall masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 28 Teakwood for COMPLEX CARVING : Providing and fixing Ist quality (Superior Quality- Indian) Teakwood for COMPLEX CARVING like decorative arches, decorative columns,decorative design structural members like beams,columns,joist,rafters,purlins,purlin cleats,hip rafters, jack rafters, ridges, wall plates, post plates and posts, pedestals or any other wooden members etc. including removing damage/decayed wood members,fixing stainless steel screws, cutting, sawing,making proper wood jonery, scaffolding if necessary all iron work and applying one coat of primer or as directed by Enginner Incharge etc. complete For wood size = 6 x 7 to 6 x 8( It is mandatory for contractor to use well seasones Indian teak wood from forest departments FDCML) 29 Providing Ashalar fiiniishing and Pointing to existing khandaki flooring in 1:3 proportion as directed by the engineer in charge. Note: After removal of paver block contractor needs to ask a consultant and archeology officials to visit for inspect and check the existing flooring condition, before further flooring work. (consultant and archeology officials visit is compulsary) 30 Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete 31 Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. 32 Providing/Re-setting Stone Paving,First Sort ofreuse-stones in lime mortar 1:1, as per detailed specifications and drawings or as directed including the joints running true, the stones to be laid with joints not exceeding 6 mm. (¼″) thick and to be evenly and firmly bedded flush in mortar on the concrete and no hollow left, preparing the lime mortar in lime miller, watering and all paving workwhen handed over to be perfectly clean and free from all mortar stains etc. complete. 33 Galvanised iron sheet 0.8 mm (22 B.W.G.) eaves precoated gutter 200 mm to 230 mm wide and 100 mm to 125 mm deep moulded or half round girth up to 600mm including iron rods, on the edges (throughout the length) and galvanised iron sheet ferrules with fixtures, for outlets wherever required clamped using W.I. clamp 38 mm x 3mm fixed 1.0 m C/C including making necessary connections with rain water pipes etc complete and as directed. 34 Filling in plinth and floors with approved excavated material in 15cm. To 20 cm. Layers including watering and compacting etc. complete. 35 Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. 36 Providing Un-coursed Rubble Masonry of trap / granite stones in lime mortar 1:1½, in superstructureas per detailed specifications and drawings or as directed including the stones to be set in the work as received from the quarry, after merely knocking off weak corners and edges with the masons hammer, the stones shall be carefully laid so as to break joints, no joint shall exceed 12.5 mm. (½″) in thickness, every stone shall be set flush in mortar, the face stone shall be for greater size, and good beds, one through stone shall be inserted at least every 0.80 sq. mete (1 square yard), the joints shall be racked out carefully at least 25 mm. (1″)where pointing or plastering tobe done, striking joints where no pointing or plastering is to be done, preparing the lime mortar in lime miller, scaffolding, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 37 Providing Coursed Rubble Masonry Second Sort of trap / granite stones in lime mortar 1:1½, size ofstone(0.45x0.30x0.20m)inplinthasperdetailedspecificationsanddrawingsoras directed including the stones shall be laid in horizontal course, the face of the stones to be hammered and bushing not to be project more than 3.8 cm. (1½″), all stones to be set full in mortar, all side jointsshallbeverticalandbedshorizontalandnotjointsshallbemorethan12.5mm.(½″),the through stones shall be inserted 5 and 6 feet apart in every course, preparing the lime mortar in lime miller, bailing out water, watering and all masonry work when handed over to be perfectly clean and free from all mortar stains etc. complete. 38 Providing Ashlar Rough-tooled Stone Steps of trap / granite stones in lime mortar 1:1½ with size ofstone (0.30m x 0.45m x 0.20 m)asperdetailedspecificationsanddrawingsorasdirected including the stones be of approved quality, colour, hard and free from defect of any kind, the stones shall be of exact size and shape, the shall berough-tooled on exposed surface,holes for balusters should be cut in the steps before they are laid, each stone shall rest at least 3.8 cm. (1½″) on that below it, the beds or joints being in no case more than 3 mm. (⅛″), preparing the lime mortar in lime miller, watering and all steps work when handed over to be perfectly clean and free from all mortar stains etc. complete. 39 Providing 10 mm.thick RoughCastLimePlasterinsinglecoatinlimemortar1:1in superstructure,asperdetailedspecificationsanddrawingsorasdirectedincludingalljointsin masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even anduniformcoat wellpressedintothe jointsandto bewellbeatenfor1½dayswithhand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kgJaggaryand640grampulpofwoodapple(Belfruit)in90to135litreofwater,theplaster being wetted occasionally with fresh water while the beating is in progress, all exposed angles and junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendiorjute)percubicmetreoflimemortarasabondingmaterial,oflimeasabonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete. 40 Providing 12mm.thickRoughCastLimePlasterinsinglecoatinlimemortar1½:1in superstructure,asperdetailedspecificationsanddrawingsorasdirectedincludingalljointsin masonry and brick work are to be racked out to a depth of at least 20 mm. and the wall to be washed with fresh water and thoroughly wetted for six hours before plastering, the plaster to be applied in an even anduniformcoat wellpressedintothe jointsandto bewellbeatenfor1½dayswithhand tappers, the plaster should also be well sprinkle during the proses of beating with a mixture of 1.10 kg jaggary and 640 gram pulp of wood apple (Belfruit) in 90 to 135 litre of water, the plaster being wettedoccasionallywithfreshwaterwhilethebeatingisinprogress,allexposedanglesand junctions with door frame to be carefully finished, all mouldings shall be worked true to template and drawn neat, clean and level, soffits of arches must true arch of circle, preparing the lime mortar in lime miller with 1.60 kg Gugal (a kind of fragrant gum) and 960 gram chopped hemp (fibre of bhendiortag)percubicmetreoflimemortarasabondingmaterial,oflimeasabonding material, scaffolding, watering and all work when handed over to be perfectly clean and free from all mortar stains etc. complete. 41 Dutchmen repairs of stone sections that severely distresses, reinstallation of new Black basalt stone piece to match existing stone as a facia of minimum 75mm depth of similar colour and texture and size. The size of the atone piece would be approx of 150 x 300 mm. The fixing of the new stone would employ mortar grout and anchoring technique after neatly cutting out damaged stone profile using one of the following techniques: a) stainless stell pins of 6mm dia threaded at end b) Helifix treatment. 42 ProvidingFineCoatOf Limeover roughcastplasterinsuperstructure,asperdetailed specifications and drawings or as directed including the finishing coat is to be applied over rough castplasterandwell-polishedwithtrowel,preparingthelimemortar,scaffoldingandwatering complete. 43 Conveying the excavated materials, debris of brick or stone masonry, R.C.C. slab, water proofing, stone members/ materials, cement/ lime concrete, tiles/marbles/ stone slab/ brick bat coba etc. upto 5 km. away from the site and cleaning the site properly. 44 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/or pointing and/or applying chemical and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:-(1) The elevational area of the scaffolding shall be measured for payment purpose. (2)The payment will be made once only for execution of all items for such works. 45 Numbering the monument elements in proper order before lowering down with approved colour and shade as directed by Engineer in-charge, including ladder, scaffolding etc. complete. 46 Loweringdowncarefullyexistingstonemasonryofthemonumentmanuallyinproperorder including shifting the stone elements up to a distance of 50 meter beyond the monument area and stackingthemasdirectedby Engineerin-charge,removingbuilding rubbishandcleaning thesite etc. complete. 47 Providing Carving to Wooden Members like Columns, Arch, Railing Etc. 48 ProvidingSoil Bag Support to the monument with contractor´ssoil in proper layers carefully as directed by Engineer in-charge including filling, tying and conveying the bags,removing the soil bags after work up to a distance of 50 meter beyond the monument area and cleaning the siteetc. 49 Signages 50 Preparation of 5-10 min documnetary film on Conservation of Siddheshwar Temple precinct, of which will include script development, shooting, voice over, post production wherever required as per the script 51 Documentation (Still Photography & Videography) of the conservation Process (before, after and every 3 months during process)

BRR:8284602 Bids Are invited for Workstation Pc , Scada Software With 1500 Tags , Development Of Scada Graphics , 21 Inches Hmi With Enclosure And Smps , Development Of New Hmi Screen C Modification Of Old Hmi Screen , Plc Component Ios C Other Required Components With Terminal Block And Accessories , Installation Integration And Development Of Logic , Sitc Of Necessary Hardware And Software For Data Integration With Iris As Per Bpcl Requirement , Integration Of Tank Farm Management System , Sitc Of Necessary Hardware And Software For Data Sharing With Bpcl Sap Total Quantity : 10

BRR:8284154 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - Amc Services Of Terminal Automation System (Tas) And Scada System, Re Support, Troubleshooting Of Tas And Scada Whenever Required, Maintaining Adequate Spare Parts Compatible With Existing System Of Both Ha..

BRR:8283823 Bids Are Invited For Advanced Data Acquisition And Visualisation System , Mechanical System With Integration Of Advanced Sensors Total Quantity : 2

BRR:8283583 Bids Are Invited For Site Survey, Supply, Delivery, Erection, And Commissioning Of Scada Display System Total Quantity : 1

BRR:8278824 Tender For Estimate For P.S. To 1 No. 3 Kw Single Phase New Bsnl Connection To Sdo Pch 4 G Towers At Village-Pura Under Khaniyadhana R D/C Dn.. Pichhore.. (234343) - 280 Kg.,9.1 Mtrs. long PCC pole 2 33 KV Pin Insulator Polymer Composite (10 KN) 3 M S ANGLE 75X75X6 mm 4 WPB160x160mm,30.44 Kg/Meter H beam,13 mtr long 5 (v) ACSR Dog conductor 0.10 sq. inch (100 sq.mm. Al.Eq.), (6/4.72 + 7/1.57 mm) 6 33 KV (45KN) Composite Polymer Disc Insulators 7 33 KV Strain hardware (T&C type) fittings 8 M S Channel 100X50x6 mm 9 200 Kg., 9 Mtrs. long PCC pole 10 11 KV Pin Insulator Polymer Composit (5 KN) 11 M S Angle 65X65X6 mm 12 AAAC Raccoon conductor 0.075 sq. inch (80 sq.mm. Al.Eq.) 13 11 KV(45KN) Composite Polymer Disc Insulators 14 11 KV Strain hardware (T&C type) fittings 15 33/11 KV Power transformer , OFTC Type , 5000 KVA (LOSS 4KW + 23 KW) 16 33 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 17 33 KV control & relay panel with static relay for Transformer protection 18 11 KV VCB, Outdoor Porcelain clad type with complete structure and accessories excluding CT & pannel 19 11 KV.C.Ts.(Outdoor dry type) 200-100/5 Amps 20 11 KV.C.Ts.(Outdoor dry type) 300-150/5-5 Amps 21 11 KV control & relay panel with static relay for Transformer protection 22 11 KV control & relay panel with numerical static relay for double feeder protection 23 30 V 200 Amp Hour Battery Set in Transparent SAN Container 24 9 KV Gapless type(5 KA) polymer lightening arrestor 25 33 KV/110 V 3-Phase 4 Wire CT/PT Ratio 400 -200 / 5 Amp Outdoor Oil Immersed Type, Class 0.2S 26 11KV/110V, CT/PT 200-100 / 5 Amp, Outdoor Oil Immersed Type 27 33 KV Single Phase PTs. 28 H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-9 mtr. Long= 333.9 kg 29 H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-11 mtr. Long = 408.1 kg 30 BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 100 KVA Distribution Transformer 31 11 KV D.O. Fuse Unit Polymer type 32 R S joist 175x85mm 19.6kg/mtr 9.3 mtr long = 182.28 Kg 33 Copper Control Cable 12 Core. 2.5 Sq.mm. (Unarmoured) 34 Copper Control cable 10 core, 4 sqmm PVC , Armoured 35 11 KV LA POLYMER TYPE GAPLESS /METAL OXIDE 9 KV , 10 KA SUBSTATION TYPE 36 XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts 37 11 KV Isolator complete with insulators 600 Amp. w/o earth switch 38 DLMS Compliant LT THREE Phase Whole Current Static Energy Meters (10-60A) with Optical Communication Port Duly fitted in meter box 39 Copper Control Cable 8 Core. 2.5 Sq.mm. (Unarmoured) 40 3Ph 4W 3x63.5V lb=5A Imax=10A, HT trivector meter,0.5s,(For Consumer metering) 41 11 KV 1500 KVAR AUTO SWITCH CAPACITOR BANK INCLUDING ASSOCIATED EQUIPMENTS with SCADA Compatible 42 33 KV CT Outdoor Oil immersed type 300-150/5-5 Amp 43 PVC insulated 2 core armoured 2.5 sqmm Aluminium conductor 1100 Volts 44 33 KV Polymer Lightening arrestor Gapless type, Station type 45 PVC insulated 4 core armoured 16 sqmm Aluminium conductor 11000 Volts 46 Copper Control Cable 2 Core. 2.5 Sq.mm. (Unarmoured) 47 AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.) 48 XLPE Cable 1 core unarmoured 150 sqmm Aluminium conductor 1100 Volts 49 ACSR Panther conductor 0.20 sq. inch (200 sq.mm Al.Eq.) 50 33 KV Isolator complete with insulators 600 Amp. w/o earth switch 51 33 KV Strain hardware (T&C type) fittings suitable for Panther 52 30 V -10Amp Battery Charger rectifier type 53 11 KV PT Single Phase 54 Copper Control Cable 4 Core. 2.5 Sq.mm. (Unarmoured) 55 Back Clamp for 280 Kg PCC Pole of MS Flat 65x8mm.(Each weight 1.92 Kg) 56 Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire 57 Jointing Sleeves suitable for Dog (100Sq.mm.Al. Eq. ) AAAC conductor 58 Clamp 65X8 MM of MS Flat for pcc Pole 280Kg. (Each weight 3.04 kg ) 59 Stay Insulators 90X65mm 60 Back filling of poles with boulders. 61 Stone Block/Pre cast block for base pedding(450X450X75MM) 62 Concreting of structures & foundation (1:3:6) 63 Red oxide paint 64 Aluminium paint 65 Danger Boards Enamelled 33 KV 66 Aluminium Binding wire and tape 67 M.S.Nuts with Bolts 68 Stay Wire 7/4.00 mm.(7/8 SWG) 69 Back Clamps for H-Beam of MS Flat 65x8mm (Each weight 1.92 Kg) 70 Concreting of stay (20 mm / 25 mm) @ 0.3 cmt. per stay 71 Stay set complete without Stay wire 20 mm. (Hot Dipped galvenised) 72 G.I. Wire 4.0 mm. (8 SWG) 73 Guarding for line/ Road crossing with 6 SWG GI wire & lacing of 8 SWG GI wire 74 Anti climbing devices ( Barbed wire 2.24 mm dia, 14 SWG) 75 MS strain plate 65x8mm 250mm long 76 M.S.Angle 50x50x6 mm 77 G.I. WIRES 4.0 MM. (8 SWG) 78 Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay 79 Danger Boards Enamelled 11 KV 80 Stay set complete without Stay wire 16 mm. (Hot Dipped galvenised) 81 Stay Wire 7/3.15 mm.(7/10 SWG) 82 Stay set complete without Stay wire 16 mm. (Painted) 83 Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole 84 Fencing of S/s land with barbed wire 85 Yard fencing with chain link mesh over brick wall 86 MS main and wicket gate on RCC column 87 MS Sheet Shine Board, bay indication board & RYB phase indication board 88 Ctrl room & Internal electrification work for Size 6.00 X 11.70 M for rural ar. 89 Yard leveling and metalling 90 Laying of Metal in yard:100 mm thick metalling with 40 mm size B.T. 91 Pro. avoid grass in sub-station yards detailed in (e-1) and (e-2) in Civil Stock 92 Approach road with hume pipe culvert (WBM) 93 App road(RCC 1:2:4)main gate to power xmer found size(20x3M)Black soil 94 App road 60mm thick concr paver block M-30 grade along trench upto various equip 95 ADD DIGGING 150 MM DIA TUBE WELL, CASING BEYOND 60 MTR 96 1000L P/F Sintex OH tank & GI pipe fitting,water tap near X-mer neutral earthing 97 Providing and fixing 5HP submersible pump 98 P&F perfo cable tray 300 wide,2 thick fix 45x45x5 MS angle grouted CC 1:24 99 ing brick massonery 0.6x0.6M inner,flag stone cover:18 no. earth pit 100 Fire extinguisher cartridge CO2 10 kgs 101 Cost of retaining wall 1.5 M high as per site requirement 102 Marshelling box with 10 no. connectors 103 SHEET METAL METER BOX SUITABLE FOR H.T. STATIC TRAVECTOR METERS WITH TTB 104 Direct Curent Distribution Board (DCDB) 24 Volts Indoor floor/ wall 105 ACDB 415 V, along with three phase-neutral voltmeter, three phase ammeter 106 LED Lamp with 90 Watt (Complete) for Streetlight luminaire with pressure die cast aluminium housing body output Rated life Burning Hrs 50000 Hr CCT>5500K, IP66 OIR of IS10322/IEC60598, LM79&LM80 LED Efficiency>130 Lm/w,nominal CRI >75, 2 Yr warranty 107 T CLAMP FOR 33KV & 11KV BUS, SUBSTATION upto DOG 108 Bi Metallic Clamp for Power Transformer of Brass Flat 50x50x10MM 109 Clamp 65X8 mm Flat of MS Flat for H-Beam ( Each weight 3.2 kg) 110 Clamp A type 65x8mm of MS Flat for R.S. Joist(175x85mm) 111 Concreting of foundation of VCB (1:3:6) @ 3.5 cmt per VCB plinth 112 PTR Fndn.Cncrt.:1:1.5:3 Rio 5.634,1:5:8 Rio 7.545 cmt&M.S.Flat/rod 324.87 kg 113 Furniture for control room Table 600mmx 900mm- 1no., Chair- 3no., 114 Galvanized Iron (GI) Flat 50X6 MM 115 Galvanized nut & bolt with washer 116 M S Channel 75X40x6 mm 117 EARTHING SET (40MM , 3 METER GI PIPE , GI WIRE, EARTHING CLMAP AND NUT BOLT) 118 G.I. STRIP 25X3 MM 119 Erection charge for bore 12 d 15 deep murrum by dril & feeling bore using black cotton/agr soil. After that soil making bore3 dia 10 deep and earth mat 1 rod, 2 GEM bag & I H-Clamp&I/C of all earth pits for mesh of PTR-N, VCB,ME,LA,ABs & Isolator 120 LT distribution box with 1.2 mm thick MS powder coated sheet, 200 A MCB on incoming & 6 no. 125 A HRC fuse base including 100 A HRC fuse , For 100 KVA Transformer 121 Maintenance free earthing system set consisting of 1 cu bonded electro 14.2 mm dia, 3 mtr long with min 250 micron cu bonding with UL marking on the rod along with 2bags (11.3 kg/bag) of GEM-Ground enhancement material, as per IEC62561-7with1 H-Clamp 122 Lebour Charge for Compny Side Material 123 Lebour Charge for Compny Side Material paide to Cont. % 124 SGST @ 9% 125 CGST @9%

BRR:8278052 Tender For Construction Works Relating To Revival Of Traditional Pond/Tank At Nimgaon Tal.Malegaon Dist.Nashik-Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming watering including shoring and strutting ete. complete. (Lift from 1.5m To 3.0 m.) By Mechanical MeaneRd A Pane in 250 (SSP21161 Providing and fixing 12 mm dia. mild steel bar upto 0.5 M. length for anchor rods with necessary threading nuts and bolts etc. complete. As directed by Engineer in charge. (SSR-I.No.-38.32) Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. As directed by Engineer in charge. (SSR 1.No.-21.4) Providing and laying in situ / ready mix cement concrete of M-10 proportion with trap/ granite/quartzite/ gneiss metal in foundation including necessary form work, compacting and curing etc. complete. (with reversible drum type mixer with SCADA with fine agreegates of required specifications (Natural sand/VSI sand finely washed etc )CD.-3 Page.No. 160 (SSR-1.No.-11.02) Providing and casting in situ / ready mix PCC M15 grade of trap metal for coping to head walls/parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )Bd-E-7 (SSR-I.No.-11.3) Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.Bd.F.17, Page No. 306 (SSR-J.No.-26.33) P.V.C.pipe 110mm dia.4kg/cm2 pressure (class 11) Providing selected hard murum filling including laying in layers of 15 to 20cmwith watering and compacting etc. complete.CD. 14 Page.No. 167 (SSR-I.No.-11.24) Providing and fixing informatory sign boards of size 60 cm x 80 em made out of 14 guage Aluminum sheet bonded with IRC Specified colour of retro reflective sheeting of Type IV High Intensity Micro-Prismatic Grade Sheeting (IIP) having pressure sensitive/heat activated adhesive, IRC Specified colour retro reflective cutout border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour Royalty charges As per Government of Maharashtra, Revenue and Forest Departments Gazette No. 67 Dt. 15 May 2015, States that the Royalty charges of Rs. 400/Brass (i. e. Rs. 141.34/cum.) are considered. In DSR for items of supply of Rubble, Murum, Soil, 60mm./40mm, metal (Hand broken), royalty charges are not included in the rates. Prevalent Royalty charges shall be separately considered while preparing estimate and shall be part of Schedule-B of tender. Any revision in Royalty charges shall be included in the prize variation clause which will be operative both ways. Bd.W.4 Page No.583 (SSR-I.No.-GN iv) v)) Royalty For sand Quality Control Charges.

BRR:8277540 Bids Are Invited For Supply Of Vfd 1200Kw/690V/3Ph/Ip42 Supply Of Vfd 1200Kw, 690V, 3Ph, Ip42 Ingress Protection Panel C , Supply Of Ac Induction Motor Supply Of Ac Induction Motor 1200Kw, 3Ph, 690V, Water Or Oil Cooled, Co , Supply Of Plc Panel And Scada Supply Of Plc Panel And Scada For Drive & Motor Control, System Contro , Installation, Commissioning & Testing Of Vfd, Motor, Plc, Scada As Per Edt-2149 , Supervisory Control And Data Acquisition (Scada) Lab Kit Total Quantity : 53

BRR:8277432 AUGMENTATION OF POWER TRANSFORMER CAPACITY FROM (3X6.3) MVA TO (2X6.3+1X10) MVA AND OTHER ALLIED WORKS AT MD BAZAR 33/11 KV SUBSTATION UNDER SURI DIVISION, WBSEDCL.- 1 ERECTION OF H/L ISOLATOR STRUCTURE WITH 8MTR PCC POLE 2 ERECTION OF CABLE SUPPORT STRUCTURE WITH LA TRAY INCLUDING SUPPLY OF NECESSARY 100X50 GI CHANNELS, 75X40 GI CHANNELS, 65X6X6 GI ANGLES AND 65X6 GI FLATS 3 ERECTION OF 33KV, 400A, CENTRE ROTATING ISOLATORS H.L. W/O E.S. INCLUDING SUPPLY OF NECESSARY PG CLAMPS, CONNECTORS ETC 4 ERECTION OF 33KV VCB, SCADA COMPATIBLE WITH NECESSARY CONNECTORS 5 ERECTION OF33KV,C&R PANEL .SCADA COMPATIBLEFORINDIVIDUAL CONTROL OFPOWER TRANSFORMERSWITH DIFFERENTIALRELAY WITH NECESSARY CONTROL CABLE CONNECTIONS FOR COMMISSIONING 6 ERECTION OF33KV.200-100/1-1-LA, CT WITH NECESSARY CONTROL CABLE CONNECTIONS INCLUDING SUPPLY OF CT JUNCTION BOX 7 LAYING & JOINTING OF 1.1KV 4C X 2.5SQMM COPPER CONTROL CABLE WITH SUPPLY CABLE LUGS, GLANDS, TAPES, SOCKETS ETC 8 LAYING & JOINTING OF 1.1KV 8C X 2.5SQMM COPPER CONTROL CABLE WITH SUPPLY CABLE LUGS, GLANDS, TAPES, SOCKETS ETC 9 LAYING & JOINTING OF 1.1KV 12C X 2.5SQMM COPPER CONTROL CABLE WITH SUPPLY CABLE LUGS, GLANDS, TAPES, SOCKETS ETC 10 INSTALLATION OF 30V, 100 AH BATTERY 11 INSTALLATION OF 30V, 35A AUTOMATIC FLOAT CUM BOOST BATTERY CHARGER 12 ERECTION OF 42KV CLASS GAPLESS LIGHTNING ARRESTOR INCLUDING SUPPLY OF NECESSARY GI BASE PLATE AND LA CONNECTOR 13 LAYING OF 11KV 3C X 300SQMM XLPE CABLE 14 JOINTING OF O/D TYPE HEAT SHRINKABLE END TERMINATION JOINTING KIT FOR 11KV, 3C X 300SQMM XLPE CABLE 15 JOINTING OF I/D TYPE HEAT SHRINKABLE END TERMINATION JOINTING KIT FOR 11KV, 3C X 300SQMM XLPE CABLE 16 FIXING OF 12KV GAPLESS LIGHTNING ARRESTOR (3 NOS = 1 SET) 17 INSTALLATION OF AC SWITCH BOARD INCLUDING SUPPLY OF COMPLETE AC SWITCH BOARD AND NECESSARY CONNECTIONS 18 INSTALLATION OF DC SWITCH BOARD INCLUDING SUPPLY OF COMPLETE DC SWITCH BOARD AND NECESSARY CONNECTIONS 19 ERECTION OF 10 MVA 33/11 KV POWER TRANSFORMER INCLUDING SUPPLY OF NECESSARY BIMETALLIC CONNECTORS 20 ERECTION OF RTCC PANEL FOR 10 MVA 33/11 KV POWER TRANSFORMERWITH NECESSARY CONNECTION 21 DISMANTLING OF 6.3 MVA 33/11 KV POWER TRANSFORMER & RETURN TO STORE 22 DISMANTLING OF 400-200/1-1A CT AND RETURN TO STORE 23 EARTHING LABOUR WITH NECESSARY EARTHING MATERIALS 24 RISING OF 11KV 3C X 300SQMM CABLE WITH SUPPLY OF 150 MM DIA GI PIPE 25 ERECTION OF33KV,C&R PANEL .SCADA COMPATIBLEFORINDIVIDUAL CONTROL OFPOWER TRANSFORMERSWITH DIFFERENTIALRELAY WITH NECESSARY CONTROL CABLE CONNECTIONS FOR COMMISSIONING 26 FIXING OF 33KV DISC INSULATOR INCLUDING SUPPLY OF NEESSARY EYE BOULT 27 FIXING OF 33KV PIN INSULATOR 28 Fixing /FittingsTension clamp to panther with compression joint 29 STRINGING SAGGING OF ACSR 200SQMM (PANTHER) CONDUCTOR INCLUDING NECESSARY DROPPER ARRANGEMENT AND SUPPLY OF NECESSARY T CONNECTOR, ALUMINIUM TAPE AND PG CLAMP

BRR:8277430 AUGMENTATION OF POWER TRANSFORMER CAPACITY FROM (3X6.3+1X10) MVA TO (2X6.3+2X10) MVA AND OTHER ALLIED WORKS AT SURI 33/11 KV SUBSTATION UNDER SURI DIVISION, WBSEDCL- 1 ERECTION OF CABLE SUPPORT STRUCTURE WITH LA TRAY INCLUDING SUPPLY OF NECESSARY 100X50 GI CHANNELS, 75X40 GI CHANNELS, 65X6X6 GI ANGLES AND 65X6 GI FLATS 2 ERECTION OF33KV,C&R PANEL .SCADA COMPATIBLEFORINDIVIDUAL CONTROL OFPOWER TRANSFORMERSWITH DIFFERENTIALRELAY WITH NECESSARY CONTROL CABLE CONNECTIONS FOR COMMISSIONING 3 ERECTION OF33KV.200-100/1-1-LA, CT WITH NECESSARY CONTROL CABLE CONNECTIONS INCLUDING SUPPLY OF CT JUNCTION BOX INCLUDING SUPPLY OF CT CONNECTOR 4 LAYING & JOINTING OF 1.1KV 4C X2.5SQ. MM COPPER CONTROL CABLE WITH SUPPLY OFCABLE LUGS, GLANDS. TAPES,SOCKETS ETC 5 LAYING &JOINTING OF1.1 KV8C X2.5SQ. MM COPPER CONTROL CABLE WITH SUPPLY OFCABLE LUGS,GLANDS,TAPES,SOCKETS ETC 6 LAYING & JOINTING OF1.1KV 12C X2.5SQ. MM COPPER CONTROL CABLE WITH SUPPLY OFCABLE LUGS. GLANDS,TAPES. SOCKETS ETC 7 ERECTION OF ACSR 200SQMM (PANTHER) CONDUCTOR (3 WIRE) INCLUDING LAYING HOISTING JOINTING ETC 8 MAKING COMPRESSION JOINT FOR ACSR PANTHER CONDUCTOR 9 ERECTION OF 42KV CLASS GAPLESS LIGHTNING ARRESTOR INCLUDING SUPPLY OF NECESSARYGI BASE PLATE AND LA CONNECTOR 10 LAYING OF 11KV 3C X 300SQMM XLPE CABLE 11 JOINTING OF O/D TYPE HEAT SHRINKABLE END TERMINATION JOINTING KIT FOR 11KV, 3C X 300SQMM XLPE CABLE 12 JOINTING OF I/D TYPE HEAT SHRINKABLE END TERMINATION JOINTING KIT FOR 11KV, 3C X 300SQMM XLPE CABLE 13 FIXING OF 12KV GAPLESS LIGHTNING ARRESTOR (3 NOS = 1 SET) 14 FIXING OF 11KV PIN INSULATOR 15 ERECTION OF 10 MVA 33/11 KV POWER TRANSFORMER INCLUDING SUPPLY OF NECESSARY BIMETALLIC CONNECTOR 16 ERECTION OF RTCC PANEL FOR 10 MVA 33/11 KV POWER TRANSFORMER 17 DISMANTLING OF 6.3 MVA 33/11 KV POWER TRANSFORMER & RETURN TO STORE 18 DISMANTLING OF 400-200/1-1A CT AND RETURN TO STORE 19 DISMANTLING OF C&R PANEL AND RETURN TO STORE 20 EARTHING LABOUR INCLUDING SUPPLY OF NECESSARY EARTHING MATERIALS

BRR:8274194 Providing Necessary Facility In Premises Of Smashanbhumi At, Umari Tq.Parbhani, Dist.Parbhani (Under Jan Suvidha, 2025-26) - 1 Supplying trap/granite/quartzite/gnesiss stone over size metal of requred size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders/Rubble and stacking broken metal etc.complete. (Prior approval of sample stack of broken metal by the ex engineer in necessary the date of approval will from part of the measuement) a) 80 mm metal, By breacking rubble obtained by blasting.Complete.SSR Item No.50.55 & Page no.24 2 Supplying soft murum at the road side including conveying and stacking etc. as directed by Engineer in charge 3 Spreading 80/40 mmmetal including sectioning etc.completeas directed by Engineer in charge 4 Spreadinghard murum / soft murum/ gravel or kankar for side width complete. 5 Provding and cast in situ/Ready Mix cement concrete in M-10/ of trap/ granite/ quartzite/ gneiss metal for foundation and bedding inlcuding bailling out water,steel centering formwork,laying /pumping, Compacting. Roughening them if special finishis to be provided. finishing if required and curingcomplete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum type mixer/concrete Batch mix plant (Pan Mixer)etc.complete. 6 Providing RCC Garden Benches (Concrete Bench) 7 Providing and fixing made Hydraulic pressed Mechanically vibrated and compacted precast inter locking cement concrete paving blocks 80 MM thick in M-40 grade of approved size and shape for city street small /medium market roads,low volume roads utillity cuts o arterial roads etc.as specified and as per IS 15658:2006 including cost of all materials etc. 8 Provding and fixing board diaplying information.such as Name of work,Tender cost,name of contractor,work compltion and liability period etc,having rectangular shape of 1.20mx0.9m size made out 18 gauge (1.25mm) thick mild steel sheet paited with one coat etc. 9 Providing Quality Control Test 1) Cube Test 10 Royalty Charges

BRR:8272243 Civil Work For Transfer Station And Mrf Center At Chh.Sambhajinagar- 1 clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness 2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 3 filling in plinth and floors with approved excavated material in 15cm. to 20cm. layers including watering and compacting etc. complete. 4 providing selected hard murum filling including laying in layers of 15 to 20cmwi the watering and compacting etc. complete 5 Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. 6 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 7 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 9 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. pardi of required thickness including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishingand rougheningthem if special finish is to be provided and curingcomplete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 12 ProvidingandlayinginsitucementconcreteM30withtremixtreatmentfor200mm thicknessforflooringwithgroovecuttingof4mmwideand20mmdeepwithnecessary refilling with bitumenetc. complete. 13 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete 14 Providing and erecting structural steel for sakav with all bracing gusset plates etc. as per detailed design and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/welded connection and oil painting with 2 coats of approved quality and shade etc. complete. 15 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). 16 Providing and fixing valley gutter of 22 B.W.G. (0.8 mm) plain galvanised iron sheets 120 cm wide with teak wood planking 20 mm thick including two coats of coaltarring the upper surface of plank etc. complete. (excluding painting to underside of plank). 17 Providing and fixing P.V.C. Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete 18 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. 19 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 20 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placedat every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete. 21 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. 22 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. 23 Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. 24 Providing and applying two coats of textured synthetic paint of approved shade and quality and one coat of primer before applying textured paint including scaffolding if necessary preparing surface by thoroughly cleaning oil, grease, dirt and other materials as required, etc. complete. 25 Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. 26 Providing and fixing frame with / without ventilator of size as specified with Country cutteak wood for doors and windows including chamfering, rounding, rebating, ironholdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete 27 Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. 28 Providing and fixing 30mm thick PVC FLUSH L DOOR SHUTTER consisting of panel of hollow PVC profile of 20 mm thickness consisting frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mminserted inside the hollow section of stiles rails top ?and bottom rails and two 19x 19 mm MS tubes inserted horizontally inside the hollow profile section using 4/5 mm sheet using screws hollow profile shall be lipped with 10 mm (5mm x2) thick x 20 mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof waterproof plain /prelam PVC sheet using solvent cement on the both sides of the panel including stainless steel fixtures and fastening etc. Complete as per direction of Engineer incharge, manufacturers specification and drawing 29 Providing & fixing factory-made steel door of Single leaf Internal Plain Wood finish type with a.) frame of size 100x58 mm conforming to IS : 4351-2003 , 1.2 mm thick pre galvanized sheet with mitred and welded cones , frame stretches, hinge reinforcing plates , fixing plates and hardware mounting plates and Polyurethane foam infill b.) Shutter of thickness 46mm made of 0.8 mm thick slip coated pre galvanized steel sheet on both sides conforming to ASTM A527/ASTM A525, BS 2989 1994, IS 277 , Zinc coating 120 GSM . Lock formed panels with internal stiffeners of 3mm thick made of galvanized sheet, 3 mm thick hinge r-einforcing hardware mounting plates and lock protection with Honey-comb craft paper infill of thickness 150 GSM of load bearing capacity 500 Kilogram/ One Square Metre. c.) Finish: Powder coated surface finished with thermosetting polyurethane paint of Aliphatic grade of thickness 60-micron d.) Accessories: Min 8 Anchor fastener of HILTI make, min 3 SS Ball Bearing Butt Hingesof Dorset make, 30 Providing soak pit of size 120cm x 120cm x 120cm including excavating andfilling with brick-bats 31 Providing and fixing hume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying) 32 Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x45cm size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs andbrass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trapup to the outside face of the wall. 33 Providing and fixing Anglo Indian type white glazed earthenware water closet pan with trap with UPVC seat and lid with chromium plated brass hinges and rubber buffers including UPVC and vent pipe up to the outside face of wall with flushing cistern and necessary fittings including cutting and making good to the walls and floors testing etc. complete.( prior approval of sample and brand by Ex. Engineer isnecessary before use) 34 Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters 35 RWH - Shallow Percolation Pit providing, constructing 2.0m deep shallow depthpercolation pit comprising of 1.0m dia pre-cast RCC rings, 300mm thick side fillingaround outside of RCC rings (annular space) with 40mm size boulders including filling ofpercolation pit up to 0.5m depth (from bottom up) with 25-75mm clean washed gravelsfollowed by 0.5m depth of 10-25mm of clean washed stones followed by 0.5m of washedriver fine aggregate (natural sand/crushed sand VSI grade finely washed etc.)including netlon mesh between each gravel/fine aggregate (natural sand/crushed sandVSI grade finely washed etc.) media layer including covering with RCC slab,manhole frame & cover, PVC rungs etc. including arrangement for inlet & outletpipe, excavation & backfilling as shown in the drawing. The rate shall be inclusive ofall labour, material, wastage, scaffolding, transportation, taxes, including all leads,lifts at all levels. All material should be of approved make. All works complete asper the drawing, technical specification and direction of the Engineer in charge 36 Boring/drilling bore well of 300mm dia for casing/ strainer pipe, by suitablemethod prescribed in IS: 2800 (part I), including collecting samples from different strata,preparing and submitting strata chart/ bore log, including hire & running chargesof all equipments, tools, plants & machinery required for the job, all complete as perdirection of Engineer in charge, upto 90m depth below ground level. 37 Supplying,assembling,loweringandfixinginverticalpositioninborewell,unplasticized PVCmedium well-casingpipe of150mm dia,conforming toIS:12818,includingrequired hireandlabourcharges,fittings&accessoriesetc.allcomplete,foralldepths,asperthe direction of Engineer in charge. 38 Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader / Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401-- Plant Mix Method and Grading - III Material 39 Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. 40 Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, , cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant/ Weigh batch mixer, transported to site with all leads and lifts, laid with a paver with electronic sensor /by suitable means as approved by Engineer-incharge , compacting with vibratory roller, finishing, curing and including preparation of sub-grade surface if required etc. complete. with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. 41 Providing and laying in-situ M40 Grade unreinforced plain cement concrete pavement with max 20% fly Ash ( Fly-ash upto 20% by weight of Cement) over a prepared sub base with 43 grade cement , coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation as per Table 600-3 of MORTH Specification 2013, mixed in a batching and mixing plant/ non tilting mixer and Weigh batcher as per approved mix design, admixtures, transporting to site, spreading, laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and grades as directed by Engineer-in-charge and curing by curing compound /by providing cement vata in cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottom and 40 mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-in-charge. 42 Providing and fixing in position TMT FE 500, 32 mm dia dowel bars precoated withanticorrosive epoxy paint of required Dia. 60 cms. Long and at 30.00 cm. C/C andwherever directed including handling, straightening, necessary cutting supported byTMT FE 500, chairs with proper alignment by using properly designed assembly ofBulkheads lubricating half length with bituminous paint as directed etc. complete. 43 Providing and fixing M.S. grill door 24 Kilogram/ One Square Metre of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc 44 Turbo ventilator 24 45 20 ton Weiht Bridge 46 Standard Consistancy,Fineness, Specific Gravity,Setting Time ( Initial & Final ), CompressiveStrength, Soundness. 47 Water Absorption, Specific Gravity,Impact Value, Crushing Value. 48 Sieve Analysis. 49 Abrasion Value. 50 Flakiness Index & Elongation Index. 51 Stripping Value. (for Bituminous Work) 52 Soundness. 53 GSB Mix Design./Cement Treated Sub Base ( CTSB) 54 Wet Mix MacadamMix Design. 55 Fineness Modulus ( Sieve Analysis ),Silt & Clay Content 56 Chloride& Sulphate Content. 57 Silt Factor. 58 Compressive Strength OF C.C. Cube (Set of 3 cubes). 59 Concrete Mix Design (With all Tests onbasic materials) 60 Flexural strength of Beam. 61 Resistance to applied Voltage. ( 1 Hr. Test ) (Set of 2 Bars) 62 Resistance to applied Voltage.( 30 Days Test )( Set of 2 Bars ) 63 Thickness of Coating. (Set of 2 Bars) 64 Chemical Resistance Test.( Set of 8 Bars ) 65 Hardness of Coating Test . 66 Salt Spray Test ( 4 Cycles ) ( Set of 2 Bars ) 67 Upto 16 mm(Set of 3 Bars) 68 Above 16 mm (Set of 3 Bars) 69 Nitrol Solution Test. (Set of 3 Bars)

BRR:8271188 Bids Are Invited For Data Acquisition Sys For Deviation Analysis Total Quantity : 1

BRR:8270215 Tender For Kaushalya Vikas Kendra Building At Saoner Dist Nagpur-Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation anp necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 m.to 3.00 m) By Mechanical Means Providing soling using 80 mm size trap metal in 15 cm. layer including filling voids with Crushed sand/grit, ramming, watering etc. complete. |Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/granite/ quartzite/gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typе mixer/concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.l. quality Artificial Sand Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap /granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) - Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) etc

BRR:8268658 Construction Of Processing Shed 760 Sq. Mt-2 EXCAVATIONExcavation for foundation in earth, soil of all types, sand, gravel, and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation, and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.5 m.) By Mechanical Means 3 Excavation for foundation in earth, soil of all types, sand, gravel, and soft murum, including removing the excavated material up to a distance of 50 meters beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting, etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Filling in plinth and floors with approved excavated material in 15cm to 20cm layers, including watering and compacting, etc. Complete. 5 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer in charge in layers of 15cm to 20cm including watering and compaction etc. complete. 6 Providing soling using 80mm size trap metal in 15cm layer including filling voids with crushed sand/grit, ramming, watering, etc. complete. 7 Providing pre-constructional anti-termite treatment as per I.S. 6313 (Part-II) treatment by treating the backfill in immediate contact with foundation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorpyrifos per one square metre of vertical surface area covering 10 years guarantee on bond paper 8 FOUNDATION & FOOTING(P.C.C. FOR FOOTING ) Providing and laying cast in-situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, and curing complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 9 (FOOTING CONCRETE ) Providing and laying cast in-situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage, and footings of R.C.C. columns and steel stanchions, etc. including bailing out water, steel centering, formwork, cover blocks, laying/pumping, compaction, and curing, roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 10 ( COLUMNS CONCRETE )Providing and laying Cast in situ/Ready Mix cement concrete M-25 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed, including steel centering, formwork, cover blocks, laying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided, and curing, etc. complete, (Excluding reinforcement and structural steel). with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 11 ( PLINTH BEAMS CONCRETE )Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed, including steel centering, formwork, cover blocks, laying/pumping, compaction, and roughening the surface if special finish is to be provided, and curing, etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 12 ( PLATFORM LANDING CONCRETE )Providing and laying Cast-in-situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings, including steel centering, formwork, cover blocks, laying/pumping, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel). With fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 13 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches, etc. as per detailed designs, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding, and supporting as required, complete. 14 ( TREMIX FLOOR CONCRETE WORK ) Providing and layingin situ cement concrete M20 with TREMIX TREATMENT for 100 MM thickness for flooring with groove cutting of 4mm wide and 20 mm deepwith necessary refilling with bitumen etc. complete. 15 (Brick Work) Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls, including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces, and watering, etc. Complete 16 ( BRICK WORK ) Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 17 ( INTERNAL PLASTER ) Providing internal cement plaster 12mm thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing, etc. complete. 18 ( EXTERNAL PLASTER ) Providing sand-faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag, curing the same for not less than 2 days, and keeping the surface of the base coat rough to receive the sand-faced treatment 6 to 8mm thick in cement mortar 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding, etc. Complete. 19 Providing and applying white-wash in two coats on old/newplaster do rmasonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing and brooming down etc. complete. 20 Providing and applying colour-wash ..of approved colour and shade in one coat to old surfaces which are to be recoloured including scaffolding, brushing and brooming down. (excluding base coat of white wash) etc. complete. 21 Providingandfixingmildsteelgrillworkforwindows,ventilators,etc.15Kilogram/OneSquareMetreasperdrawingincludingfixturesnecessaryweldingandpaintingwith one coat of anticorrosive paint and two coats of oil painting complete. 22 PEB WORK Supplying, fabricating, erecting and fixing in position of steel structures at all elevations using fusion welding quality steel E-350 (Fe490) conforming to IS:2062 - 2006. Rate shall include cost of cutting, welding, splice plates and packing plates, transporting,straightening, cleaning, fabricating and erecting in position welded/bolted Structural steelwork in columns, beams, trusses, purlins,platforms, ladders, monorails, staircases ,supports, strengthening of steel membersetc. at site to line and level, supply of approved bolts/nuts/washers etc. complete as per drawings includingpainting as per G4/G5/G6 before erection and all materials and labour charges etc., complete andincluding Sand blasting & painted with 1 coats of enamel paint (Berger EPILUX SG – HHI 664002) of 35-50 micron each coat with air less spray gun over a coat of zinc chromate primer - 35-50 micron etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / Construction Manager. (The rate quoted shall include cost of bolts,nuts, washers, welding and electrodes required for the complete work). 23 Supplying, fabricating and erecting of Cold Formed Light Gauge structural steel members conforming to IS:801/ IS:811 hot-dip galvanised to IS:4759 - 96 including cutting, welding or bolting, splice plates and packing plates,transporting,straightening, cleaning, fabricating and erecting in position. 24 Supply & Fixing of PPGI sheets of 0.5 mm thick as shown in drawing or as directed by engineer incharge with all necessary accessories.(Essar) Make) 25 Supply & Fixing of 0.5 mm thk PPGL roof accessories as per drawing or as directed by engineer incharge-CORNER FLASHING,Center Ridge,Gable flashing 26 Supplying, fabricating and erecting in position PPGI Eaves Gutter of required size with stop ends,all fixing accessories, drop ends, etc., at all elevations levels & heights including aligning, leveling, providing and fixing bolts, nuts, washers etc., conforming to latest specification including straightening, cutting, welding, bending to shape, bolting etc., complete and as directed as per engineer incharge 27 Providing and fixing of the rain water down take pipes of PPGI, the sectional area of rain water down take pipes provided shall be generally at the rate of 1 square cm per 70 to 80 square decimetre of roof area drained. No spout shall be less than 80 mm in diameter. The spacing of spouts shall be arranged to suit the position of openings in the wall including necessary accessories for fixing the pipe and including all materials and labour charges etc., complete as shown in drawings, as per specifications and as directed by the Engineer-in-Charge / 28 Supply & Fixing of 2mm thkpolycarbonate sheets as per drawing & as directed by engineer in-charge. 29 Supply & Fixing of turbo ventilator with 610 mm throat, having base ring & top plate in stainless steel of 0.8 mm thick, rotated using twin bearings of SKF - 600122 & 600322 permanently lubricated & sealed. Fixed in FRP base plate of2mm thk clear 1.020mtr wide & 1.7 mtr long. 30 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness, reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with holdfast arrangements, M.S. Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high-grade cast iron or mild steel and one coat of red lead primer, etc. complete. (I.S. 6248-1979) (Without mechanical gear) 31 ROYALTY CHARGESFOR SAND 32 FOR METAL 33 FORMUROOM 34 LAB TESTING CHARGES Cement - Fineness,Standard Consistency, Setting Time (Initial & Final ), Compressive strength, Soundness 35 Concrete M-25 - Mix Design with all tests on basic materials 36 Concrete M-25, M20 and M-10 grade - Concretecompressive strength 37 Crushed metal - Water absorption, Specific gravity,Impact value,Crushing value 38 Brick - Crushing value, Water absorbation, & Specific Gravity 39 Steel - Tensile strength ,Yield stress, ultimate tensile stress, %elongation, weight per running meter,Bend/Rebend test.(Set of 3 Bars) 40 Murum - Plasticity Index 41 Murum - Field Density of compacted layer 42 Murum - ( Proctor Density Test ) 43 Sand Test -Sieve Analysis 44 ELECTRICAL WORKS Providing and fixing lioghtening conductor system comprising of erecting Air - Termination consisting of tubular copper rod of 25 mm dia.1.2 mm thick with multiple point shead 1.2mt.long (Heavy Duty)welded or clamped to G.I. pipe pole B grade 50 mm dia of required length with M.S . round base plate 25 Cm diamand 10 mm thick at bottom embeded in cement concrete 1:3:6 foundation of size 45 cm dia m x 45 cm Height and providing earthing with copper earth plate of size 60 x 60 x 0.3 cms with cad mium plate nut bolts to fix earthing strip burried in specially prepared earth pits 1.5 metre below ground level with 40 Kilogram charcoal and salt with altemate layers of charcoal and salt and G.I. pipe 40 mm dia2 meter length burried in earthing plate remining portion above ground level for watering and refilling comcpete Note-Copper strip from lightening conductor is not considered in this item. 45 Providing and fixing copper strip 25 mm wide and 3 mm thick for lightening conductor including fixing with screws required scaffolding etc.complete Note-Lightening conductor and earthin pits is not considered in this item 46 Supplying and errecting HMS PVC conduit FRLS Grade 25 mm dia. With pvcaccessorieson wall/ ceilling as per specification No. WG-MA/ CON 47 Supplying and errecting mains with 1X1.5 sq. mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Buss bars or any otherplaces as per specification No. WG-MA/CON 48 Supplying and errecting mains with 2X1.5 sq. mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Buss bars or any otherplaces as per specification No. WG-MA/CON 49 Supplying and errecting mains with 2X2.5 sq. mm. FRLSH copper PVC insulated wire laid in provided conduit/trunking/inside pole/Buss bars or any otherplaces as per specification No. WG-MA/CON 50 Supplying and errecting modular type 3pin 6/16 A multy sockets with safety shutter, duly errected on provided plate and box with wiring connectionscomplete 51 Supplying and errecting PVC surface maodular switch box with doublemounting plate for 6 module duly errected 52 Supplying and errecting PVC surface maodular switch box with doublemounting plate for 12 module duly errected 53 Supplying and errecting street light wall bracket made from 40 mm dia G I pipe1.2 m in total length complete as per specification no FG- BKT/WB 54 Supplying, errecting and marking SPMCB 6A to 32 A, C series with rated short -circuit braking capasity 10kA in provided distribution board as per specification no SW-SWR/MCB 55 Providing earthing with galvnised iron earth plate size 60 X 60 C 0.6 cm complete with all materials, testing and recording the resuilt as perspecification no EA-Ep 56 Prviding and managing 20 Trees in the same premises, under Management Strategies And Implementation Plan ( MSIP ) to ManageEnvironmental , Social , Health And Safety.

BRR:8268636 Baramati Industrial Area Providing Erecting Testing and Commissioning Pumping Machinery for Phase II I/A at WTP Baramati and allied works- 1 Providing Erecting Testing and Commissioning Pumping Machinery 2 Providing, installing, commissiong and testing pumpset having VERTICAL TURBINE / VERTICAL MIXED FLOW PUMP of self water lubricated, above floor type pump capable of discharging Pure water at the rate of 135 Cum/ Hr. at the duty point head of 62 M and operating within the head range of 58 to 64 M including stainless steel basket strainer , bowl assembly , column assembly, discharge head of 200 mm dia, base plate, connecting stool etc. complete. The column pipes shall be manufactured from pipes of 8mm thick and each of 1.5 m length and all line shafts and impellers shafts of stainless steel AISI 410 and impellers of CF8M, including all consumable materials, accurate glycerein filled pressure gauge to read entire range of pressure from 0 to 100 m complete with necessary tubing.The pump should be operating at 1450 RPM speed and shall be complete as per the detailed specifications & also having VERTICAL SOLID SHAFT SQUIRREL CAGE 3 PHASE INDUCTION MOTOR as a prime mover, developing 50 HP / 37.5 KW with F class insulation and B class temperature rise with thermister protection embedded in stator winding complete with RTD and BTD operating on 415 V, 50Hz, 3 Ph, 1470 RPM AC power supply suitable to drive the pump complete with all accessories required as per detailed specifications complete. 3 Providing, erecting, commissioning of LT Set switchgear panel, cubical type, MS sheet fabricated from 14 gauge CRCA sheet including all accessories, switchgear, Copper busbar, foundation channel this item includes Designing, providing, erecting, testing & commissioning of FCMA starter without any active electronic component, moving parts & totally harmonics free, FCMA starter lifted with all accessories including providing & applying painting to frame with international orange colour & two doors & covers siemens gray etc. The starter shall be suitable for 200 HP induction motor operating at 415/440 Volts, 3 phase 50 Hz AC supply. The starter shall be flux compensated magnetic amplifier type (FCMA type). The details list of material required for L.T. Starter panel required for L.T. Starter panel are mentioned in itemwise specification consist of material quantity and make. The main components of panel are as below. 1) 315 A, 4 pole MCCB - 1 Nos. for Incomer 2) Starter Feeders with 150 A MCCB for motor feeder with FCMA Starter for 50 HP motor. - 2 Nos. 3) Auxillary Feeder -- 100 A X 1 No., 63 A X 2 Nos. & 32 A x 1 No. ; 4) Common Capacitor Bank with copper bus bar - 20 + 20 KVAR for indutual starter in the step of (5 x 2 No. + 3 x 2 No. + 2 x 2 No.) 4 Supplying, erecting, commissioning & Testing of full bore ELECTRO- MAGNETIC flow meter of 300 mm diameter as per ISO 4064, having IP68 sensors, data Logger having facility of onboard Data Logging, web server facility with LED Display, etc complete suitable including Dismanling joint of suitable size with slipon flanges and working on power supply of 85-260 VAC and 45-65 Hz inclusive of transportation to worksite, loading, unloading and hoisting and carefully fixing in position etc. complete. (rate to include flanges, MS pipe, clearing the site by providing machineries and jointing new flow meter with accessories i.e flanges, gaskets, Nut bolts with labour, Machineries and double welding work to all welding joints & any other material required for jointing etc complete. 5 200 mm diameter 1.6 RatingSupplying erecting testing and commissioning DI D/F non-rising spindle soft seated glandless Gate Valves with electrically operated actuators body with dismantling joint and bonnet of Ductile cast iron of grade GGG-50, wedge with fully encapsulated EPDM rubber (approved for drinking water ) and seals of NBR. The valves should be with replaceable stem nut and replaceable sliding shoes. Valve stems shall be of single piece thread rolled type. Valve shall have 3 “O” rings of NBR for stem sealing. Gate valve shall be compatible for buried application without valve chamber. Face-to- face dimensions as per BS 5163-89/IS 14846 – PD/EN 558 F4 and flange connections as per EN1092-2/IS 1538, Maximum valve operating less than the torque as stated in the standard EN 1074. Electrostatic epoxy power /liquid coating (EP-P) inside and outside color blue RSL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy coating should be potable water certified. Material of construction :- Body, Bonnet :- Ductile Iron GGG50 (EN-JS-1030) Wedge, (Fully rubber encapsulated):- Ductile Iron GGG 40(EN-JS-1030) encapsulated with EPDM rubberPortable water certified. Spindle / Stem: - SS: AISI 420 Stem Nut:- Brass Bonnet Gasket: - EPDM rubber potable water certified Internal fasteners: - Stainless Steel SS304 Stem Sealing :- Toroidal NBR sealing rings (Min 03 ‘O’ Rings) Coating: - Inside & Outside epoxy powder coated; DFT minimum 250 micron, shade RAL, 5005 (Signal Blue) potable water certified. excluding GST) 6 200 mm diameter PN 1.6 RatingSupplying erecting testing and commissioning DI/D/F Slanted seat swing rubber flap check valve (Non Return Valve) similar to RETO STOP Non return Valve including requred size and number of Slipon Flanges having body of ductile cast iron GGG-40 and disc of ductile cast iron GGG-40 with fully encapsulated with EPDM Rubber (Potable water certified). Slanted seat is fixed for easy opening and quick closing. Full bore opening to achieve high discharges & reduced pressure drops. Check valve Electrostatic epoxy power /liquid coating (EP-P) inside and outside color blue RAL 5005 with minimum coating thickness of 250 microns. The EPDM rubber & Epoxy coating should be potable water certified. Face to face dimensions as per EN558-1, series 48 and flange connections as per EN 1092-2/IS 1538 including all labour, material complete. PN rating 1.6 Material of Construction :- Body & Cover :- Ductile iron to EN-JS 1030 (GGG-40) Disc :- Ductile iron to EN-JS 1030 (GGG-40, fully coated with EPDM rubber (portable water certified) Hinge Pin/Shaft :- Stainless Steel [ AISI 431] Cover Screws Nuts : - Stainless Steel [ AISI 304] Plug :- Brass Surface Protection :- Epoxy powder coating, min.-250 microns, color: RAL 5005 signal blue (potable water certified) 7 Providing erecting and commissioning the 80 mm dia dynamic air release valve for PN 1 etc complete as per detailed specifications. 8 Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. 9 Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for foundation and bedding / steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing, cutting, bending, hooking, tying and laying in position TMT FE 500 steel bars for reinforcement for all RCC works as per detailed drawings etc. complete. 12 Providing M. S. Slipon Flanges at departmental store or work site, finished smoothly on one side including drilling of holes as per B.S. Table or IS: 1537-1976 including cost of MS plates. (Rates excluding GST)200 mm dia - 12 mm thk - 7 Kg 13 300 mm dia - 12 mm thk - 9 Kg 14 Providing M. S. Slipon Flanges at departmental store or work site, finished smoothly on one side including drilling of holes as per B.S. Table or IS: 1537-1976 including cost of MS plates. (Rates excluding GST)LT Cables (Aluminum) (CB-LT/AL)Supplying, erecting & terminating FR XLPE insulated, galvanised steel formed wire armoured (strip) cable, 1100 V 3½ core 70 sq. mm. aluminium conductor complete erected with glands & lugs on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB-LT/AL 15 HT Cables (CB-HT)Supplying , erecting & terminating XLPE insulated, galvanised steel formed wire armoured (round ) cable 11 kV(UE), 3 x 95 sq. mm. aluminium conductor laid in provided trench / pipe as per specification no. CB-HT 16 Cable Joints & End Termination Kits (HT Cables) (CB-JT/HT)Providing and erecting Heat shrinkable outdoor termination kit for 11 KV (E) XLPE HT cable 3 x up to 95 sq. mm. with necessary material as per specification No. CB-JT/HT 17 Providing and erecting Heat shrinkable straight through joint kit for 11 KV (E) XLPE HT cable 3x up to 95 sq. mm. with necessary material as per specification no. CB-JT/HT 18 Cable Enclosures (CB-CE)Supplying & laying (including excavation) half round reinforced cement concrete pipe of NP-2 class of 150 mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. 19 Steel Poles (OH-PL)Supplying and erecting rolled steel joist (girder) pole 100 x 116 mm (23 kg/m) with base plate in provided foundation as per specification no. OH-PL/RSJ 20 Brackets (OH-BKT)Supplying & erecting inline D.P. Structure for 11/0.415kV, 63kVA Transformer with RSJ pole 2 nos. of size 100x116mm x 11m long with suitable distribution box of CRCA sheet 16 SWG with 4 pole MCCB 100A as incomer & 6 nos. 63A kitkat/MCCB for outing circuits. Transformer D.P. Structure includes the A.B. switch 200A, D.O. fuse set & L.A. set. 2 nos. top channel of size 100x50mm for erection of A.B. Switch & 2 nos. base channel of size 100x50mm for erecting Transformer channel of size 75x40mm for erecting D.O. fuse set, L.A., A.B. switch handle etc. Angle of size 50x50x6mm for erecting distribution box, Transformer belt etc. as per drawing (min. 124 Kg. iron work ) with necessary clamps, Nut-bolts. V cross arm, top clip, insulators etc. with caution board & barbed wire, D.P. structure shall be erected in c.c.. foundation complete. 21 Conductors (OH-CON)Supplying and erecting ACSR conductor of size - 6/1-4.09 mm (Raccon) complete. (318.00 kg/km) as per specification No. OH-CON/ACSR 22 Insulators (OH-INS)Supplying and erecting porcelain disc type insulator 70 KN with necessary hardware suitable for 11kV line, complete as per specification no. OH-INS/DI 23 Supplying and erecting porcelain pin type insulator with GI pin suitable for 11kV line, complete as per specification no. OH-INS/PN 24 AccessoriesSupplying and erecting G.I. stay set for poles, including loop insulators at inaccessible height with anchor plate 300x300x6mm., straining screws, G.l. stay wire 7/10 SWG, G.l. stay rod 20mmx1.8m length and pole clamps duly erected in provided cement concrete foundation complete. 25 C.C. FoundationMaking Cement concrete foundation including excavation (60 x 60)cm x deep 1/6 of pole length in 1:3:6 cement concrete 20 x 25 mm stone metal, 45cm x 45cm x 45cm/ 45cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete. (for above 9m poles) 26 Making Cement concrete foundation including excavation (60 x 60 x 150)cm deep in 1:3:6 cement concrete, (20 to 25) mm stone metal with necessary curing and finishing complete.(for stay). 27 Plate, Pipe type Earthing (EA-EP)Supplying, installing and testing earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm with funnel with a wire mesh for watering and brick masonry block C.I. cover complete with all accessories of G.I. materials & recording the results as per specification no. EA-EP 28 Supplying, installing and testing pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.I. Rod complete with all accessories of GI materials & recording the results as per specification no. EA-EP 29 AccessoriesSupplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with bituminous paint in an approved manner with joints required as per specification no EA-EP. 30 Supplying and erecting GI earth conductor of required sizes used for earthing or any other purposes on wall with necessary GI clamps fixed on wall/cable/ conduit with screws complete.

BRR:8268587 Supply Of Material To Construction Of Bachatbhavan Under Mregs Convergence At Asona Gp Talani Tq. Morshi, Dist. Amravati-2 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthebuildingareaand stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means 3 Excavation for foundation in earth, soils of all types, sand,gravel and soft murum, including removing the excavated material upto a distance of 50 metres beyond the building area and stackingandspreadingasdirected,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5m to 3.0m) By Mechanical Means 4 Providingsoling using80mm sizetrapmetalin15cm.layerincludingfilling voidswith Crushed sand/grit, ramming, watering etc. complete. 5 ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM-10oftrap/granite/ quartzite/gneissmetalforfoundationandbeddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfullyautomaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) 6 Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations,grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailingoutwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 7 Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineerincharge inlayersof15cm to20cmincludingwateringandcompactionetc. complete. 8 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 9 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or asdirectedincludingsteelcentering,formwork,coverblocks,laying/pumping, compactionandrougheningthesurfaceifspecialfinishistobeprovidedandcuringetc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 10 ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/ gneiss metal for R.C.C.slabs andlandingsasper detaileddesigns anddrawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 11 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabledreversibleDrum Typemixer/concreteBatchmixplant(Panmixer)etc.complete.Withfineaggregate (Crushed sand VSI Grade) 12 Providing andlaying Castinsitu/ReadyMixcement concrete M-15oftrap/ granite/quartzite/gneissmetalforcoping to plinthorparapet,mouldedorchamferedasper drawingorasdirectedincludingsteelcentering,plywood/steelformworkcompacting, rougheningthemifspecialfinishistobeprovided,finishingunevenandhoneycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade) 13 Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C.pilecaps,footings,foundations,slabs,beamscolumns,canopies,staircase,newels, chajjas,lintelspardis,copings,fins,archesetc.asperdetaileddesigns,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 14 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates oranglecleatsinmainandcrossbeams,hipandjackrafters,purlinsconnectingtotruss members andthe like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil paintingofapproved quality and shade etc. complete. 15 Providing and fixing GI precoated metacular sheet of 0.50 mm thick and 930 profile for roof including roof bolt and necessary fixing arrangement (prior sample and brand by Ex. Engineer is necessary before use) As directed by Engineer incharge.SE Corrigendum and schedule 6720 Dt. 18/12/2018. 16 Providing and fixing plain zinc sheeting of 0.80 mm thick (22 B.W.G.) over the ridge hip or valley to galvanized iron sheet roofing including all fastening and bolt galvanised iron screws and bolts, lead and bitumen washers etc. complete.(Weight of 6.8 Kilogram/sq.m.). 17 Providing and fixing self supporting steel roofing systemfor a Godown or alike made up of structural grade steel sheet of 912 millimeter width ( tolerance +/- 2 millimeter ), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 15.30 meter having arch rise as 3.06 meter, arch length 17.75 meter. The base material made up of importedgalvalume steelcomplying to ASTM A792having base metal thickness of 0.80 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as per approved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2 x 7 and turbo ventilator of 24 diameter to be installed at every 30 feet along the length of roof including finishing, testing and cleaning etc. complete. 18 Providing and fixing in position after hoisting, precast 1:2 cement mortar reinforced jali 50 mm thick with 3 mm diameter mild steel bar reinforcement, of approved design on both side, fixing in cement mortar 1:3 and curing etc. complete 19 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar 1:6 in plinth as backing in composite masonry including bailing out water manually, striking joints, raking out joints and watering etc Complete. 20 Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksincement mortar1:6insuperstructureincludingstrikingjoints,rakingoutjoints,wateringand scaffolding etc. Complete 21 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positionsincludingbasecoatof15mmthickincementmortar1:4usingwaterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 days and keeping thesurfaceofthebasecoatroughtoreceivethesandfacedtreatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingoutgrainsandcuringforfourteendays scaffolding etc.complete. 22 Finishing the terrace slab integrally mixed with water proofing compound in c.m.1:3 proportion with 12mm thick layer including curing, finishing using water proofing compound at the rate of 1kg per bag of cement etc. complete.As per SSR 2020-21 SE Corrigendum I.No.1 23 Providinginternalcementplaster12mm thickinsinglecoatincementmortar1:4without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 24 Providing and laying polished hand cut Kotah Stone flooring 25mm to 30mm thick and 45cm to 55cm wide in plain/diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. 25 Providingandfixingmachinecutmirrorpolished18mm to20mm thicktelephoneblack granite / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc.complete . Both side polish 26 Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Cat bary brown / RBI red / Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade withfullmoulding and three grooved line forthetreadsonbedof1:4Cementmortarincludingfloatfilling jointswithneatcement slurry curing polishing and cleaningetc. complete. 27 ProvidingandfixingheavydutyinterlockingconcreteRUBBERMOULDGLOSSY PAVING BLOCKS of 60 millimeter thickness of having a strength of 400 Kilogram/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 millimeter thick including striking joints and cleaningetc. complete. (using 100% crushed sand) 28 Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting withone coatsof anticorrosive paint and two coats of oil painting complete. 29 Providing and Fixing mat finish stainless steel (of 302 grade ) railing with toppipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75mmdiameteretc.complete(PriorapprovalofsampleandbrandbyEx.Engineeris necessary before use) 30 Providing andfixing onwalls/ceiling/floor 20mm dia.CPVC pipe withnecessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 31 Providing and fixing on walls/ ceiling/ floor 25 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 32 Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. 33 Providing and applying two coat of Polymer Based External paint of standard manufature like Apex from Asian paints, Excel from Nerolac paints, Promise from Dulux of approved color to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface etc. for specified buildings complete.(including primer coat)As directed by Engineer-in-chargeAs per SSR 2020-21 SE Corrigendum I.No.8 34 Providingandapplying2Coatsofhighqualityacryliccopolymermattapprovedlow VOC emulsion paint of approved shadethat gives smooth, flat and washable and durable finishing of approvedmake. Paint should have good flow levelling property with good colour retention andincanantibacterialproperty.Painthastobeappliedonsmoothanduniformsurface prepared by an acrylic copolymer low VOC & Odour putty. This surface should be primed with water based low VOC acrylic copolymer based primer sealer that has incan antibacterial property.Theworkactivityshouldcoverallaspectsofapplyingpaintsfromsurface preparation,fillingtoerectinganddismantlingofscaffolding,finishingthesurfaceetcas directed by Engineer in charge. 35 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S. Bracket plate 300 x 300 x 3.15 mm minimum size and shape with square bar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high grade cast iron or mild steel and one coat of red lead primer etc. complete. (I.S. 62481979) (With mechanical gear) 36 Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two trackswithrectangularpipe having overalldimension63.50x38.10x1.02mm atweight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695Kilogram/One Running Metre.Topandside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/One Running Metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Runningmetre.AsperdetaileddrawingsandasdirectedbyEngineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box. 37 Providingandfixing90cmx60cm Graniteplateengraving10cm.Height letter,figures including painting the lefters/figures with approved colour and shade complete

BRR:8265943 Construction of M.H. 105 To Kasalkhand Road , V.R. 58, Panvel- 1 Item No.1:-Supplying hard murum/ kankar at the road site, including conveying and stacking complete. 2 Item No.2:- Spreading hard murum for side width etc. complete 3 Item No3:- Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering etc. complete. 4 Item No.4:- Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. . 5 Item No.05:- Removing Np-2 and Np-3 class pipes including stacking at road side as directed by the Engineer in charge. Upto 900mm dia. etc complete. 6 Item No.6:- Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. 7 Item No.7:-Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately etc. complete. 8 Item No 8:-Providing and laying in situ / ready mix / ready mix M10 cement concrete of trap/ granite/ quartzite/ gneiss metal in foundation including necessary centering, formwork, bailing out water, compacting and curing etc. complete. (with fully automatic micro processor based PLC with SCADA enabled with reversible drum type mixer/ concrete batch mix plant (pan mixer)with natural /artifical sand) 9 Item No 9:-Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 900mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete 10 Item No.10:-Providing cast in situ / ready mix M10 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing andcuring etc. complete. (withreversible drum type mixer/concretebatchmixplant(panmixer) withSCADAwithfine agreegatesofrequiredspecifications (Natural sand / VSI sand finely washed etc ), cement 4.05 bags/cumt) 11 Item No.11:-Prividing and fixing pressure relief pipes of 100 mm diametre of AC / PVC as per drawing for R.C.C Raft,galaries returns, abutments, wing wall etc complete. 12 Item No.12:- Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader/ Paver on prepared surface and compacting with vibratory roller to achieve the desired density, complete as per clause 401 -- Plant Mix Method and Grading - I Material 13 Item No.13:-Wet Mix Macadam -- Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Laying By Grader/Paver. 14 Item No.14:- Providing and laying in situ cement concrete M -30 with tremix treatment for 200 mm thickness for Concrete Road is including laying plastic sheet for 125 micron thickness with groove cutting of 4 mm wide and 20 mm deep with necessary refilling with bitumen ( excluding reinforcement) with coarse and fine aggregate ( natural sand/ VSI grade finely washed crushed sand) etc. complete 15 Item No.15:- Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge 16 Item no-16:-Rates for material testing in lab. 1)cement 17 2)For Concrete m30- Compressive Strength 18 3)For Concrete m20- Compressive Strength 19 4)Rubble 20 5 Aggregate 21 Item No.43 :- Royalty charges other materials 22 Item No 44:-Add 1% For work Insuramce 23 Item No 45:-Add18% for GST Charges 24 Item No 46 :-Add 1% for SQM Charges

BRR:8264540 Bids Are Invited For Strong Motion Accelerograph (Integrated Sensor And Data Acquisition System) , Vibrometer - Induced Ground Vibration Monitoring Total Quantity : 10

BRR:8284962 Bids Are Invited For Customized Advanced Internet Of Things Kits , Things And Sensors Total Quantity : 15

BRR:8264138 Bids Are Invited For Flexible Manufacturing System With Cnc Machines And Iot Solutions , Cnc Simulator Total Quantity : 1

BRR:8263625 Bids Are Invited For Package No. 1 - Atal Tinkering Lab Of Niti Aayog Electronics Development, Robotics, Internet Of Things And Sensors (Q3) Total Quantity : 1

BRR:8295720 Supply Of Flange For Fixing Shock Absorberflange For Fixing Shock Absorber, Flange For Fixing Shock Absorber / Bg-Icf Drawing No : T-0-5-640 Alt.K/1 3. Material Spec : As Per Drawing. [ Warranty Period: 30 Months After The Date Of Delivery ] ] Dbrt Workshop Depot, Nfr Assam 2016.00 Numbers Consignee Nbq Workshop Depot, Nfr Assam 1470.00 Numbers Inspection Stage Inspection Not Required Details 3. T And C F.O.R Description Destination Delivery Period Description Delivery /Completion Rate Of Supply For All Items Completion : Within 60 Days --- Payment Terms S.No Description Payment Terms 1 As Per Railway Standard Payment System Through Neft Only. It Is Mandatory To ϬRm To Furnish Their Neft Details Regarding Bank Name, Branch Name And Branch Code, Firms Bank Account Number, Micr Code, Ifsc Code And Pan Number Statutory Variation Clause Page 1 Of 6 Run Date/Time: 16/05/2025 17:59:14Stores/N F Rly Tender Document Tender No 30250091 Closing Date/Time 19/05/2025 11:30 S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Delivery At Single Point Is Not Normal Applicable To Yes Yes Allowed Acceptable. In Case Tenderer Quote All Bidders (Optional) For Delivery Of Entire Tendered Quantity To One Consignee Against Railways Present Requirement Of Delivery To Multiple Consignees, Such OffEr Shall Be Considered Valid Only For Quantity Required As Per Tender Schedule By The Consignee To Whom Delivery Is OffEred By The Tenderer And It Shall Be Considered That There Is No OffEr For The Remaining Consignees. Page 2 Of 6 Run Date/Time: 16/05/2025 17:59:14Stores/N F Rly Tender Document Tender No 30250091 Closing Date/Time 19/05/2025 11:30 2 Railway Reserved The Right To Procure Normal Applicable To Yes Yes Not Allowed The Item Only From Manufacturer Or All Bidders Its Authorized Agent Having Proven Performance. Bulk Procurement, At- Least 80 Percent Of The Procurable Quantity, Will Be Covered Invariably On The Past Proven Suppliers. The Tenderer Must Have Supplied The Same Item To N.F. Rly Or Other Zonal Railways And Documentary Evidence Of The Performance Must Be Furnished Along With Their Offer. (A) The Tenderer With Past Performance Of Satisfactory Execution Of Contracts For Supply Of The Same Item For A Quantity Of 20% Or More Of Tender Quantity Against A Single Contract. The Period To Be Reckoned To Consider The Above Performance Will Be Current ϬNancial Year Up To The Tender Opening Date Of The Tender Under Consideration And Preceding 3 ϬNancial Years. Credential (Receipt Note And /Or Inspection Certiï¬Cate) Must Be Uploaded Along With The OffEr For The Same Item Otherwise The OffEr Is Liable To Be Ignored. (B) If Such Past Performance Level Is Lower Than The OffEr May Be Considered As Responsive To N.F. Railways Requirement For Placement Of Developmental Order Not Exceeding To 20% Of The Net Procurable Quantity. (C) The Tenderer Who Have No Past Performance As Above May Also Be Considered For Such Developmental Order, But For Consideration Of Such OffErs, Tenderer Must Submit The- Details Of M&P, Testing Facility, Qap And Iso 9000 / 14000 / 18000 Certiï¬Cates If Available, Technical Manpower Available With Them Or Nsic Registration Certiï¬Cate For Same Item Along With Their Offer. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 A ) Delivery Period OffEr Should Be Normal Applicable To No No Not Allowed Within Proposed Delivery Period. All Bidders B) Delivery Of The Material Is Required Directly To The Consignee By Road Transport. Commercial-Compliance Page 3 Of 6 Run Date/Time: 16/05/2025 17:59:14Stores/N F Rly Tender Document Tender No 30250091 Closing Date/Time 19/05/2025 11:30 S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Please Enter The Percentage Of Local Normal Applicable To Yes Yes Not Allowed Content In The Material Being Offered. All Bidders Please Enter 0 F O R Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy 2 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being Offered. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 By Tpi Normal Applicable To No No Not Allowed All Bidders Page 4 Of 6 Run Date/Time: 16/05/2025 17:59:14Stores/N F Rly Tender Document Tender No 30250091 Closing Date/Time 19/05/2025 11:30 2 Conditions W.R.T Para 10D Normal Applicable To Yes Yes Not Allowed In Respect Of Para 10D Of Revised All Bidders Public Procurement (Preference To Make In India), Order 2017 Dated 04.06.2020, No OffEr From Bidder From A Foreign Country Will Be Considered Eligible For Order For The Tendered Item If The Said Foreign Country Does Not Allow Indian Suppliers To Participate And/Or Compete In Procurement Of The Same Item In That Foreign Country. The Supplier Or Bidder Shall Be Considered To Be From A Foreign Country If (I) The Country Is Incorporated In That Country Or (Ii) A Majority Of Its Share Holding Or EffEctive Control Of The Entity Is Exercised From That Country Or (Iii) More Than 50Percent Of The Value Of The Item Being Tendered/Supplied Has Been Added In That Country. Indian Suppliers Shall Be Those Entities Which Need Any Of These Tests With Respect To India. The Para 10D Of Revised Public Procurement (Preference To Make In India),Order 2017 Dated 04.06.2020 Shall Be Applicable In Respect Of Items/Countries Notiï¬Ed By The Ministry Of Railways Relating To The Tendered Item .If An Indian Supplier Has Information Of Any Such Notiï¬Cation In Respect Of Tendered Item, It Will Be Necessary For Him To Submit Copy Of Such Notiï¬Cation Along With His OffEr. In Case, The Indian Supplier Does Not Have Copy Of Notiï¬Cation, He Shall Provide Documentary Evidence Of Such Restrictions Placed By The Foreign Country For The Railway To Act Upon. No OffEr Of A Supplier Or Bidder From A Foreign Country Will Be Considered Unless He Furnishes A Declaration (With Regard To Para 10D Of Revised Public Procurement (Preference To Make In India), Order 2017 Dated 04.06.2020)That His Country Does Not Disallow Indian Suppliers To Participate And/Or Compete In Procurement Of The Tendered Item In That Country.` Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Validity Of OffEr Should Not Be Less Normal Applicable To No No Not Allowed Than 60 Days. All Bidders 6. Documents Attached With Tender S.No. Document Name Document Description 1 5344798.Pdf Instructions To Tenderer 2 5398568.Pdf Drawing 3 4973092.Pdf Irs Terms And Condition Page 5 Of 6 Run Date/Time: 16/05/2025 17:59:14Stores/N F Rly Tender Document Tender No 30250091 Closing Date/Time 19/05/2025 11:30 4 4972782.Pdf Annexure-Ii For Tpi Inspection The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/ C And W ( Prasad Shinde ) , Flange For Fixing Shock Absorber / Bg-Icf Drawing No : T-0-5-640 Alt.K/1 3. Material Spec : As Per Drawing. [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8295584 Supply Of Design, Manufacturing, Supply, Installation And Commissioning Of Cnc Surface Wheel Lathe Machine As Per Attached Specificationdesign, Manufacturing, Supply, Installation And Commissioning Of Cnc Surface Wheel Lathe Machine As Per Attached Specification,Design, Manufacture, And Supply, Installation, Testing, Commissioning And Proving Of Cnc Surf Ace Wheel Lathe Machine On Turnkey Basis As Per Specification Appended With The Tender. It Shall Also Includ E Installation And Commissioning Of Related Equipment, Training Of Personnel In Operation And Maintenance O F Machine And Supply Of Technical Documentation. It Shall Also Include Leading Parameters (Schedule 1) As P Er Clause 2.2 Of Section Iv Of Specification Appended With This Tender. The Machine Shall Have The Provisions Of Industrial 4.0. The Firm Needs To Provide Inbuilt Hardware (For Industrial 4.0) Capable Of Communicating Vit Al Parameters For Operations And Preventive Maintenance Of The Machine. Moreover, The Firm Will Connect Th E Machine To The Existing Industry 4.0 System At Carriage Workshop, Ajmer. ] , A Set Of Concomitant Accessories As Per Para 4.2 Of Section Iv Of Specification Appended With The Tender. Bidders Are Required To Attach The Price Break Up Of These Accessories In Pdf File Along With Sub Mitted Bid. ] , Camc For 5 Years After Completion Of 02 Years Warranty Period From The Date Of Commissioning & Proving Out Of Machine By Supplier. The Details Of Camc As Defined In Clause 17 Of Section V Of Specificati On Appended With This Tender. [ Warranty Period: 2 Years, Amc Period: 5 Years, Rate Of Discounting: 1 0 % ] ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr Page 1 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly , A Set Of Optional Accessories As Per Para 4.3 Of Section Iv Of Specification Appended With The T Ender. Bidders Are Required To Attach The Price Break Up Of These Accessories In Pdf File Along With Submitted Bid. ] , Consumables: Defined At Clause 6 Of Section V Of Specification Appended With This Tender. The List Of Consumable Spares Shall Be Furnished And Quoted Along With Their Unit Rates. Bidders Are Required To A Ttach The Price Break Up Of These Consumables In Pdf File Along With Submitted Bid ] , Turnkey Charges: Foundation, Installation And Commissioning And Proving And Handing Over O F Machine On Turnkey Basis. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr 7 6510005215226 Essential Non Stock --- Yes Consignee Inr (Cnc1) Services (Y) Preventive Maintenance: The Details Of Comprehensive Preventive Maintenance To Be Provide D During Warranty Period Shall Be Indicated By The Bidder Giving Details Of Type Of Preventive Schedule, Perio Dicity On Items To Be Checked, Items To Be Replaced And Expected Plant Down Time. Details May Be Referred A T Clause 16 Of Section V Of Specification Appended With This Tender. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr 8 6510005215227 Essential Non Stock --- Yes Tpi Agency Inr (Cnc1) Spares (Y) A Set Of Any Other Accessory Which In The Opinion Of Supplier Is Essentially Required For Making The Machine Fully Functional. Bidders Are Required To Attach The Price Break Up Of These Accessories/Spares In Pdf File Along With Submitted Bid. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers Consignee Ajmer, Nwr Inspection Details Stage Inspection Not Required 9 6510005215228 Essential Non Stock --- Yes Consignee Inr (Cnc1) Services (Y) Concomitant Works:- The Firm Will Also Construct A Room (Along With Suitable Ventilation, Floorin G And Lighting) Having Dimensions 5 Meter X 5 Meter X 4 Meter (L X B X H) And Structure Will Made In Rcc Column With Brick Wall And Rcc Roof As Per Clause 4 Of Section Iv Of Specification Appended With This Tender. The Cost Of These Works Shall Be Quoted Separately And The Cost Shall Be Included For The Purpose Of Commer Cial Evaluation. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr 3. T And C F.O.R Description Destination Delivery Period Page 2 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 0 Days Of Issue Of Contract, Completion Delivery Should Be : Within 607 Days Thereafter Completed With In 607 Days From Issue Of Loa Which Will Include Supply, Installation And Commissioning Work As Per Delivery Schedule Chart As Per Clause 7 Of Section Iv Of Specification Appended With This Tender. Payment Terms S.No Description Payment Terms 1 Payment Terms For Basic Machine And Accomapnied Supply Items(Spares Etc.): The Standard Payment Terms Subject To Recoveries, If Any, By Way Of Liquidated Damages Will Be As Under: (A) 80% Payment Will Be Made On Receipt Of The Material Duly Pre Inspected And Receipted At Site By The Consignee In Good Condition. (B) I) Balance 20% Payment Will Be Made On Furnishing A Bank Guarantee For An Amount Equal To 10% Of The Contract Value, Fully Indemnifying The Purchaser Against All Losses Incurred By The Purchaser During The Warranty Period Within 30 Days Of The Receipt Of Bill Alongwith Proving Test Certiï¬Cate After Successful Completion Of Proving Test In Which The Machine Performance Would Have Been Demonstrated By The Supplier Or His Agent After Its Commissioning At The Consignee Premises. Where, However, The Installation And Commissioning Of The Machine Is Delayed Or Put Off Beyond 90 Days Of The Receipt Of The Goods At The Ultimate Destination Due To Express Written Instructions Of The Purchaser/Consignee, The Balance 20% Payment Shall Be Released To The Supplier On His Furnishing The Necessary Bank Guarantee Of Equal Amount I.E. Balance 20% Valid For The Period As Asked By The Purchaser.Ii) The Bank Guarantee As Mentioned Above Should Be From A Nationalised Indian Bank/Schedule Commercial Bank In India. 2 Payment Terms For Turnkey Charges: As Per Ptc Of Specification Appended With This Tender. 3 Payment Of Civil Work: Payment For Construction Of A Room (Alongwith Suitable Ventilation, Flooring And Lighting) Shall Be Claimed By The Contractor As Follows:- (I) 80% Payment Of The Cost Of Construction Of Room As Per Speciï¬Cation Will Be Made On Issue Of Completion Certiï¬Cate By Consignee And Receipt Of Machine Of Site. (Ii) 20% Payment Of The Cost Will Be Made Upon Issue Of Ptc For Cnc Surface Wheel Lathe Machine. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 2 The Contract Shall Be Governed By The Conditions Of Tender Inquiry , Irs Conditions Of Contract, Speciï¬Cation Attached With This Tender. The Tender Inquiry Conditions, Speciï¬Cation & Special Conditions Of Contract (If Attached) Will Have Precedence Over The Irs Conditions And Conditions Specified In Tender Annexures. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 3 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 1 1.Bulk Or Full Order Will Be Placed On Normal Applicable To Yes Yes Allowed Manufacturers Or Its Authorized Agents Who All Bidders (Mandatory) Are Either Registered With Railway For Tendered Item Or Who Has Successfully Supplied (Supply Here Interprets To Supply, Installation & Commissioning Being M&P Item) Tendered Or Similar Item* (For Similarity Purpose Cnc Surface Wheel Lathe For A Railway Application. However, The Track Gauge And Wheel Diameter May Vary) To Zonal Railway/Pu/ Core/Psu/Other Govt. Department /Public Listed Company ( With Any Revision Of Speciï¬Cation/Drawing Or With DiffErent Size) In Last ϬVe ϬNancial Year And Current ϬNancial Year Up To Date Of Tender Opening. * For The Purpose Of Similarity Cnc Surface Wheel Lathe For A Railway Application. However, The Track Gauge And Wheel Diameter May Vary%U201d 2 .Performance Certiï¬Cate:- Performance Normal Applicable To Yes Yes Allowed Certiï¬Cate Of At Least One (01) No Of Such All Bidders (Mandatory) Machine (Which Are Counted For The Purpose Of Meeting Qualifying Criteria) Supplied (Supply Here Interprets To Supply, Installation & Commissioning Being M&P Item) In Last ϬVe Financial Year And Current ϬNancial Year Up To Date Of Tender Opening And Working Satisfactorily (However The Machine Must Have Completed One Year Of Satisfactory Working After Date Of Commissioning As On Original Date Of Closing Of Tender) Shall Be Enclosed With Clear Signature And Address Of The Purchaser/Firm Using The Machine Where It Is Installed And Commissioned. The Performance Certiï¬Cate Shall Not Be Older Than 01 Years From The Original Date Of Opening Of Tender. 3 All Necessary Information/ Supporting Normal Applicable To Yes Yes Allowed Documents Required For Establishing All Bidders (Mandatory) Performance Eligibility Criteria, As Proof Of Past Supply Credentials Shall Be Submitted By The Bidder Along With Original OffEr Itself And The Onus To Prove Successful Supply And Commissioning In The Stipulated Time Frame Lies On The Bidder. In Case No Information Or Incomplete Information Is Furnished By The Bidder Or Offers Submitting Credential Orders Unaccompanied With Proof Of Supply, Commissioning And Installation, Their OffEr Will Be Liable To Be Ignored. 4 In Case The Tenderer Is An Agent Of The Normal Applicable To Yes Yes Allowed Manufacturer, They Should Clearly Indicate All Bidders (Mandatory) The Same And Also Enclose Tender Speciï¬C Current Authorization Certiï¬Cate From The Manufacturer To This EffEct On The Letter Head Of Manufacturer And Also Mention The Place Where The Equipment Will Be OffEred For Pre Inspection Before Dispatch. 5. Compliance Conditions Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 1 All The Bidders/Tenders Should Ensure That Normal Applicable To No No Not Allowed They Are Gst Compliant And Their Quoted All Bidders Tax Structure/Rates Are As Per Gst Law. In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst/Utgst/Sgstact, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. 2 Sd Condition: Security Deposit Will Be 5% Of Normal Applicable To No No Not Allowed The Contract Value . Other Conditions Of Sd All Bidders Will Be As Per Clause 12 Of Section-Ii Of Nwr Tender Conditions 3 Emd Condition: As Per Clause 3 Of Section-I Normal Applicable To No No Not Allowed Of Nwr Tender Conditions All Bidders 4 Warranty Obligations: 1. The Warranty Normal Applicable To No No Not Allowed Obligations Shall Stand For 2 Years From All Bidders Installation, Commissioning And Proving Out Of Machine By Supplier (Details Shall Be Referred At Clause 7 Of Section Iv And Clause 16 Of Section V Of Speciï¬Cation Appended With The Tender. 5 Prove Out And Penalties Regarding Normal Applicable To No No Not Allowed Productivity Drop: As Per Clause 2.5 & 2.6 All Bidders Of Section Iv Of Specification Appended With This Tender. 6 Ca Certiï¬Cate: In Cases Of Procurement For Normal Applicable To Yes Yes Allowed A Value In Excess Of Rs. 10 Crores, The All Bidders (Optional) Class-I Local Supplier/ Class Ii Local Supplier Shall Be Required To Provide Certiï¬Cate From The Statutory Auditor Or Cost Auditor Of The Company (In The Case Of Companies) Or From A Practicing Cost Accountant Or Practicing Chartered Accountant (In Respect Of Suppliers Other Than Companies) Giving The Percentage Of Local Content. The Certiï¬Cate Should Have Valid Udin Mentioned In Certificate. 7 Micro And Small Enterprises ϬRms In Order Normal Applicable To No No Allowed To Avail Themselves Of Beneï¬Ts And All Bidders (Optional) Preferential Treatments, The Mses Must Be Registered With Any Of The Following: - (A) Udyam (Udyam Registration Certiï¬Cate). (B) Udyog Aadhar Memorandum (Note :- Terminal Date For Consideration Of This Certiï¬Cate Was Till 30.06.2022 Or As Extended By Ministry Of Micro, Small & Medium Enterprises From Time To Time. Thus This Certiï¬Cate (Udyog Aadhar Memorandum) Can Only Be Considered If The Above Terminal Date Is Further Extended Beyond 30.06.2022). Mses Registered With Above Agency/Agencies Must Attach (In The Template - Attach Documents On Techno-Commercial Bid Details Form, As Scanned Copy In Pdf Format) Their Current & Valid Registration Certiï¬Cate Along With Their OffEr. Other Conditions Shall Be As Per Para 4 Of Section-I Of Nwr Tender Condition Document 8 For ϬRms Not Seeking/Eligible For Earnest Normal Applicable To No No Not Allowed Money Exemption, Earnest Money As All Bidders Stipulated In The Notice For Invitation Of Tenders (Nit) Will Have To Be Paid Only Online Through Payment Gateway Link. No Other Mode Of Payment For Emd Is Acceptable. Page 5 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 9 Tenderer Should Mention In Their OffEr: - 1. Normal Applicable To No No Allowed Name Of Manufacture With Complete All Bidders (Optional) Address. 2. Place Of Inspection Be Indicated With Complete Address, Option For Inspections At Godowns/Outstation/Multiple Places Be Strictly Avoided, And Preferably Be Permitted Only At Manufacturers Place. 10 1. For Railway Speciï¬C Items Tender Speciï¬C Normal Applicable To Yes Yes Allowed Authorization Of Oem Is Required And For All Bidders (Optional) Other Than Railway Speciï¬C Items General Dealership/Authorization Of Oem Is Also Acceptable.The Tendered Item Is Non- Railway Specific Item 2. For Traders, Non Submission/Uploading Of Valid Oem Authorization Letter Will Make Their OffEr Invalid And OffEr Will Be Summarily Rejected. 11 Please Enter The Percentage Of Local Normal Applicable To No No Not Allowed Content In The Material Being OffEred. All Bidders Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. 12 1.Bidders Have To Quote Rates Of Each Of Normal Applicable To Yes Yes Allowed The Mentioned Items Individually In Pdf ϬLe All Bidders (Optional) Such As Concomitant Accessories, Any Other Concomitant Accessories, Spares For Two Year Normal Operation, Concomitant Works Etc (Whichever Applicable ) And The Quoted Cost Will Be Included For The Purpose Of Inter-Se Ranking And Commercial Evaluation Except For Optional Services/Spares/Consumable & Camc. 2. The Price Break Up Quoted By ϬRm Will Be Binding For The Purpose Of Post Contract Management/ Entering Into Separate Contract Based On This Contract. 13 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Machine Shall Be Inspected And Tested Normal Applicable To No No Not Allowed During DiffErent Stages Of Its Manufacture All Bidders Starting From Raw Material Till The Completion Of Machine, By The Purchaser Or His Authorized Representative At The Suppliers Or His Sub-Suppliers Works. The Quality Assurance Plan As Per Annexure-I Of Section Vi Shall Be Submitted Along With The Bid. The Bidder Must Submit The Exhaustive Qap Incorporating The Tests As Given In Annexure-I Along With Other Tests /Stage Inspection As Followed By Them. 2 Railway Reserves The Right To Modify The Normal Applicable To No No Not Allowed Requirement Regarding Staged Inspection As All Bidders Per Applicable Str/Speciï¬Cation At Later Stage. 3 Bidders Are Required To Furnish Details Of Normal Applicable To No No Not Allowed Bought Out Items As Per Clause 14 Of All Bidders Section V Of Speciï¬Cation Appended With This Tender. Page 6 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 4 The Detailed Norms Regarding Insepction Normal Applicable To No No Not Allowed Shall Be Referred At Clause 9 Of Secton V Of All Bidders Specification Appended With This Tender. 5 Inspection Clause- 1. Inspection -Third Party Normal Applicable To No No Not Allowed Inspection (Tpi) For Indigenous All Bidders Product/Make . 2. Third Party Inspection Against Gc/Tc May Be Considered For Foreign Make/Brands, Indian Vendors Supplying Foreign Goods Or Goods Having Large Foreign Content. Documentary Evidence Will Be Required To Be Produced At The Time Of Inspection For The Part/Whole Assembly Which Has Been Claimed As Foreign Part/Whole Assembly. 6 The Applicable Testing/ Quality Assurance Normal Applicable To No No Not Allowed Program Will Be As Per Annexure-I (Quality All Bidders Assurance Plan) Contained In The Annexure- Speciï¬Cation (Corresponding To Each Demand/Item) Uploaded With The Nit. 7 Wherever The Inspecting Authority Is Normal Applicable To No No Not Allowed Speciï¬Ed In The Tender Documents, Bidders All Bidders Are Advised To Quote Accordingly. Offer With Any Deviation From Inspection Clause (As Per Applicability Detailed In Inspection Clause) Mentioned In Tender Will Be Summarily Rejected 8 Railway Reserves The Right To Modify The Normal Applicable To No No Not Allowed Requirement Regarding Staged Inspection As All Bidders Per Applicable Str/Speciï¬Cations At Later Stage. 9 In Case Of Tender Item Cannot Be Split Or Normal Applicable To No No Not Allowed Divided, Etc. The Mse Quoting A Price Within All Bidders The Band L1+15% May Be Awarded For Full/Complete Supply Of Total Tendered Value To Mse, Considering The Spirit Of The Policy For Enhancing Govt. Procurement From Mses. 10 F.O.R.:- Destination Normal Applicable To No No Not Allowed All Bidders 11 Service Facility In India And Techncial Normal Applicable To Yes Yes Allowed Support: The Tenderer Will Clearly Spell Out All Bidders (Optional) In The OffEr The Facilities Available With Him Or His Agent For Providing Adequate After- Sales Service In India During Warranty Period . The Complete Details Such As Organization For After Sales Service, Availability Of Technically Competent Engineers And Warehousing Facilities For Spares Should Be Clearly Indicated. Bidders Not OffEring Complete Servicing/Repair Facilities In India To Ensure Quick Response To Maintenance/ Servicing Calls Are Not Likely To Be Considered. Detailed Condition As Para Clause 13 Of Section V Of Specification Appended With The Tender 12 Purchaser Reserves The Right To Verify At Normal Applicable To Yes Yes Not Allowed Any Time, The Details Submitted By The All Bidders Bidder By Actual Site Visit. If The Information Furnished In The Bid Is Found To Be Incorrect During Veriï¬Cation, The Bid Shall Be Considered Invalid And Their Emd Shall Be Forfeited, And Necessary Action Will Be Initiated Including Suspending Business With North Western Railway. It Is The Bidders Responsibility To Ensure That The Information In The OffEr Remains Unchanged For The Validity Of The OffEr And Must Be Verifiable During This Period. Page 7 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 13 This Tender Complies With Public Normal Applicable To No No Not Allowed Procurement Policy Order,2017(Along With All Bidders Revisions/Addendums/Additions Issued From Time To Time ) With Respect To Make In India Policy. 14 The Delivery Speciï¬Ed In Tender Schedule Normal Applicable To No No Not Allowed Covers The Complete Time Period Required All Bidders For Supply, Installation & Commisssioning. 15 Foundation And Related Drawing, Approvals Normal Applicable To Yes No Not Allowed Of Ga, Foundation And Related Drawings: As All Bidders Per Clause 11 Of Section V Of Speciï¬Cation Appended With The Tender. 16 The Bidder Shall Furnish Along With The OffEr Normal Applicable To Yes Yes Allowed A List Of All Critical Items/ Sub- Assemblies All Bidders (Optional) Which Are Bought Out By The Bidder And Proposed To Be Used, Along With The Manufacturers Name, Brand Model Etc.The Manufacturer Shall Produce Invoices Of Bought Out Items/Sub-Assemblies To Ensure Genuineness Of Such Products / Veriï¬Cation By The Inspecting Agency. 17 Training:- Contractor Shall Train The Railway Normal Applicable To Yes Yes Not Allowed Staff Regarding Operation And Maintenance All Bidders Of Equipment During Commissioning Of M&P.(Detailed Training Norms Shall Be Referred At Clause 10 Of Section V Of Specification Appended With This Tender) Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 In Case The Clause Of Nit Instructs For Normal Applicable To No No Not Allowed Submission Of Requisite Document And The All Bidders Document Uploading Tab Corresponding To That Clause Has Been Deï¬Ned As -Not Allowed/Allowed(Optional) Shall Be Ignored And The Bidders Are Instructed To Upload The Requisite Document Invariably Along With Submitted Bid At Another Available Field For Document Uploading. 2 1. The Tenderer Should Quote Camc Rates Normal Applicable To No No Not Allowed Separately At The Designated ϬElds For The All Bidders Period Of 5 Years 2. For Tenders Containing Camc, The Charges Of Camc For ϬVe Years Would Also Be Included In The For Destination Price Quoted For M&P For The Purpose Of Comparative Evaluation Of Offer. 3.Tenderers Shall Note That Railway Reserves The Right To Settle And Place Purchase Order For Tendered Item With Or Without Camc Decision Of Railways Shall Be Final In This Regard. 4. With Reference To Post Contract Maintenance, This Tender Has Been Ϭ‚Oated Exclusively For Camc Requirement . Amc/Camc If Speciï¬Ed Elsewhere In Tender Document /Annexures Shall Be Read As Camc And Prices Are To Be Quoted Accordingly. 3 Speciï¬Cation For Cnc Surface Wheel Lathe Normal Applicable To No No Not Allowed Shall Be As Per The Speciï¬Cation Appended All Bidders With This Tender 4 The Section I, Ii & Iii(Sbd Nwr Document) Normal Applicable To No No Not Allowed Are Meant For Generalised Application All Bidders Wherein The Situation/Condition Has Been Not Deï¬Ned Elsewhere In Electronic Sor And Speciï¬Cation Appended With The Tender . Page 8 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 5 For Condition Speciï¬Ed In Electronic Sor, Normal Applicable To No No Not Allowed The Condition Speciï¬Ed In Elctronic Sor Will All Bidders Have Precedence Over Conditions Speciï¬Ed Elsewhere In Nit I.E Annexures Appended With The Tender. For Conditions Not Speciï¬Ed In Electronic Sor, The Conditions Specified In Annexures Will Prevail. 6 Delivery Schedule Chart: As Per Clause 7 Of Normal Applicable To No No Not Allowed Section Iv Of Speciï¬Cation Appended With All Bidders This Tender. 7 No Deviation Shall Be Permitted Against Normal Applicable To No No Not Allowed Leading Parameters Speciï¬Ed At Clause 2.2 All Bidders Of Section Iv Of Specification Appended With This Tender. Deviations Other Than The Leading Parameters, For Deviation If Any, (Other Than Leading/ Major Parameters Of Machine For Which No Deviations Shall Be Permissible) Bidders Are Required To Quote The Same Indicating Clause No. And Relevant Documents In The Statement For Commercial And Technical Deviations. Any Deviation Quoted Elsewhere Shall Not Be Considered And It Will Be Presumed That The Bid Meets/Complies The Tender Conditions. Bidders Need Not Quote Clause Wise Comments Against Various Clause Of Bid Document And May Only Quote Deviations Except For The Detail As Per Technical Bid Annexure-A Of Section Vi If Any, In The Respective Deviation Statement (This Condition Will Supersede The Corresponding Conditions Mentioned Elsewhere In Tender Documents). 8 For Traders, Non Submission/Uploading Of Normal Applicable To No No Not Allowed Valid Oem Authorization Letter Will Make All Bidders Their OffEr Invalid And OffEr Will Be Summarily Rejected. 9 The Price Break Up Quoted By ϬRm Will Be Normal Applicable To No No Not Allowed Binding For The Purpose Of Post Contract All Bidders Management/Entering Into Separate Contract Based On This Contract. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Whenever, Standard Technical Requirement Normal Applicable To No No Allowed Document Has Been Appended With The All Bidders (Optional) Tender Document, The Participants Are Required To Conduct Comprehensive Study Of The Technical Speciï¬Cations And Deviations If Any, Shall Be Indicated In The Designated Data Entry ϬEld Of Ireps Bid Submission Form. Technical Deviations Quoted Elsewhere Are Liable To Be Ignored. Page 9 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 2 Supply, Installation & Commissioning: The Normal Applicable To No No Not Allowed Contractor Shall Arrange Commissioning Of All Bidders The Equipment At The Consignee Premises. The Tenderers Shall Carry Out Necessary Proving Test To Demonstrate The Performance Of Equipment, After Its Successful Commissioning, To The Entire Satisfaction Of The Consignee Detail Mentioned In Clause 12 Of Section V Of Speciï¬Cation Attached With Tender. The Tenderer Should Quote Total Lump Sum Commission & Installation Charges For Each Unit Of Equipment. This Commission & Installation Charges Will Also Be Added In Their Quoted Total Unit Rate For The Purpose Of Inter-Se Ranking, Where Commission & Installation Is Required To Be Borne By The Tenderer As Per Tender Specification. 3 1 In Case Bidders Intends To Submit/Attach Normal Applicable To Yes Yes Allowed Catalogue (A Line Of Conï¬Rmation To Be All Bidders (Optional) Mentioned In The Ireps Bid That Supply Will Be As Per Attached Catalogue)Of The Offered Product. The Same May Be Attached Along With Submitted Bid For Better Appreciation Of Offered Product. 2 The Quality Assurance Programme As Per Annexure-I Shall Be Submitted Along With The Bid. The Bidder Must Submit The Exhaustive Qap Incorporating The Tests As Given In Annexure-I Along With Other Tests /Stage Inspection As Followed By Them. 3 Whenever, Standard Technical Requirement Document Has Been Appended With The Tender Document, The Participants Are Required Conduct Comprehensive Study Of The Technical Speciï¬Cations And Deviations If Any, Shall Be Indicated In The Designated Data Entry ϬEld Of Ireps Bid Submission Form. Technical Deviations Quoted Elsewhere Are Liable To Be Ignored. 4 Firm Shall Conduct Exhaustive Study Of The Annexures Present In The Attached Speciï¬Cation And Shall Submit Duly Signed Annexures Which Are Required At Bid Submission Stage. In Case The Same Is Not Submitted And No Deviation Has Been Submitted In The Designated ϬEld,As Mentioned Above, It Will Be Presumed That The ϬRm Has Signed All The Annexures And Agrees To Abide With All The Conditions Speciï¬Ed In Annexures. The Proformas Meant For Post Contract Stage May Be Ignored At Current Stage And Shall Be Utilized For Post Contract Activities 4 Tenderer Must Submit Clause Wise Normal Applicable To Yes Yes Allowed Compliance Of Technical Speciï¬Cations While All Bidders (Optional) Filling The Tender. Page 10 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 5 The Scope Of Supply Shall Include Design, Normal Applicable To Yes No Not Allowed Manufacture, And Supply, Installation, All Bidders Testing, Commissioning And Proving Of Machine On Turnkey Basis. It Includes All The Concomitant Accessories/Equipments As Detailed In The Speciï¬Cation And Other Concomitant Accessories/ Equipment, Which The Manufacturer Considers Essential To Make The Machine Fully Operational, When Installed And Commissioned. It Shall Also Include Installation And Commissioning Of Related Equipment, Training Of Personnel In Operation And Maintenance Of Machine And Supply Of Technical Documentation. The Machine Shall Have The Provisions Of Industrial 4.0. The ϬRm Needs To Provide Inbuilt Hardware (For Industrial 4.0) Capable Of Communicating Vital Parameters For Operations And Preventive Maintenance Of The Machine. Moreover, The ϬRm Will Connect The Machine To The Existing Industry 4.0 System At Carriage Workshop, Ajmer. The ϬRm Will Also Construct A Room (Along With Suitable Ventilation, Flooring And Lighting) Having Dimensions 5 Meter X 5 Meter X 4 Meter (L X B X H) And Structure Will Made In Rcc Column With Brick Wall And Rcc Roof. 6 Firm Shall Conduct Exhaustive Study Of The Normal Applicable To No No Allowed Annexures Present In The Annexure- All Bidders (Optional) Speciï¬Cation And Shall Submit Duly Signed Annexures Which Are Required At Bid Submission Stage. The Proformos Meant For Post Contract Stage May Be Ignored At Current Stage And Shall Be Utilized For Post Contract Activities. 7 List Of Components To Be Loaded On The Normal Applicable To Yes Yes Allowed Machine: As Per Annexure F Of Section Vi Of All Bidders (Optional) Specification Appended With The Tender. 8 The Bidder Must Submit The Technical OffEr Normal Applicable To Yes Yes Allowed As Per The Format Given In Annexure-A In All Bidders (Optional) Section - Vi. All The Information As Asked For, In The Format Must Be Given Accordingly E.G Wherever A Parametric Value Is Asked It Should Be Furnished, If A Write Up Is Asked For This Should Be Provided And If A Brochure Or Drawing Or Sketch Is Expected This Should Be Provided. In Case Of Incomplete/Sketchy/Illegible Information, The Technical OffEr Will Be Considered As Incomplete And Liable To Be Ignored. 9 Proving Test: As Per Clause 2.5 & 2.6 Of Normal Applicable To No No Not Allowed Section Iv Of Speciï¬Cation Appended With All Bidders This Tender. Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Participating Firm Undertakes That It Normal Applicable To No No Not Allowed Has Been Not Black All Bidders Listed/Suspended/Banned By Railways For Business Purpose. 2 Firm Undertakes That Careful Examination Normal Applicable To No No Not Allowed The Contents Of Po/Loa ( Whichever Is All Bidders Issued ϬRst) Will Be Conducted By ϬRm Within Ten Days Of The Issue Date Of Loa/Po And In Case Any Discrepancy Noted, Shall Make A Representation Within Ten Days Of The Date Of Po/Loa. Any Representation Thereafter For Dp Re- ϬXation On This Ground Will Not Be Entertained. Page 11 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 3 Participation In Tender Will Be Considered Normal Applicable To No No Not Allowed That Following Certiï¬Cate Has Been Signed All Bidders By All The Bidders Unless Otherwise Speciï¬Cally Mentioned In Its OffEr I Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India; I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered With The Competent Authority, I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. Note: Any False Declaration And Non-Compliance Of The Above Would Be A Ground For Immediate Termination Of The Contract And Further Legal Action In Accordance With The Law. 4 Participating ϬRm Undertakes That Quoted Normal Applicable To No No Not Allowed Technical Deviation With Respect To All Bidders Quantity/Parameter/Any Other Technical Speciï¬Cation Will Not AffEct The Smooth Operation, Functionality And Reliability Of The Equipment 5 We Hereby Declare That In Quoting The Normal Applicable To No No Not Allowed Above Price, We Have Taken Into Account All Bidders The Full EffEct Of Input Tax Credit Available Under Gst. We Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser (Railway) Accordingly. We Also Undertaken That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. The Contractor Shall Be Gst Complaint And Claim The Applicable Gst In Their Bills, Which Will Be Paid By The Railways 6 4. I/We Have Carefully Gone Through The Irs Normal Applicable To No No Not Allowed Conditions Of Contract (Included And All Bidders Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining ToCode Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That Our No Aï¬Ƒliates/Sister Concerns As Indicated By Rdso Have Participated In This Tender Which Can Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Aï¬Ƒliates/Sister Concerns Including Ours Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Conditions. I/We, Affirm That We Shall Abide By The Code Of Integrity In General, With Speciï¬C Reference To ConflIct Of Interest [Para 2502 (E)], Anti Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected, At Any Stage. 6. Documents Attached With Tender S.No. Document Name Document Description 1 4390879.Pdf Irs Condition 2 5229965.Pdf Specification 3 5337592.Pdf Nwr Sbd Page 12 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm2 ( Rajendra Solanki ) , Preventive Maintenance: The Details Of Comprehensive Preventive Maintenance To Be Provide D During Warranty Period Shall Be Indicated By The Bidder Giving Details Of Type Of Preventive Schedule, Perio Dicity On Items To Be Checked, Items To Be Replaced And Expected Plant Down Time. Details May Be Referred A T Clause 16 Of Section V Of Specification Appended With This Tender. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr 8 6510005215227 Essential Non Stock --- Yes Tpi Agency Inr (Cnc1) Spares (Y) A Set Of Any Other Accessory Which In The Opinion Of Supplier Is Essentially Required For Making The Machine Fully Functional. Bidders Are Required To Attach The Price Break Up Of These Accessories/Spares In Pdf File Along With Submitted Bid. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers Consignee Ajmer, Nwr Inspection Details Stage Inspection Not Required 9 6510005215228 Essential Non Stock --- Yes Consignee Inr (Cnc1) Services (Y) Concomitant Works:- The Firm Will Also Construct A Room (Along With Suitable Ventilation, Floorin G And Lighting) Having Dimensions 5 Meter X 5 Meter X 4 Meter (L X B X H) And Structure Will Made In Rcc Column With Brick Wall And Rcc Roof As Per Clause 4 Of Section Iv Of Specification Appended With This Tender. The Cost Of These Works Shall Be Quoted Separately And The Cost Shall Be Included For The Purpose Of Commer Cial Evaluation. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr 3. T And C F.O.R Description Destination Delivery Period Page 2 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 0 Days Of Issue Of Contract, Completion Delivery Should Be : Within 607 Days Thereafter Completed With In 607 Days From Issue Of Loa Which Will Include Supply, Installation And Commissioning Work As Per Delivery Schedule Chart As Per Clause 7 Of Section Iv Of Specification Appended With This Tender. Payment Terms S.No Description Payment Terms 1 Payment Terms For Basic Machine And Accomapnied Supply Items(Spares Etc.): The Standard Payment Terms Subject To Recoveries, If Any, By Way Of Liquidated Damages Will Be As Under: (A) 80% Payment Will Be Made On Receipt Of The Material Duly Pre Inspected And Receipted At Site By The Consignee In Good Condition. (B) I) Balance 20% Payment Will Be Made On Furnishing A Bank Guarantee For An Amount Equal To 10% Of The Contract Value, Fully Indemnifying The Purchaser Against All Losses Incurred By The Purchaser During The Warranty Period Within 30 Days Of The Receipt Of Bill Alongwith Proving Test Certiï¬Cate After Successful Completion Of Proving Test In Which The Machine Performance Would Have Been Demonstrated By The Supplier Or His Agent After Its Commissioning At The Consignee Premises. Where, However, The Installation And Commissioning Of The Machine Is Delayed Or Put Off Beyond 90 Days Of The Receipt Of The Goods At The Ultimate Destination Due To Express Written Instructions Of The Purchaser/Consignee, The Balance 20% Payment Shall Be Released To The Supplier On His Furnishing The Necessary Bank Guarantee Of Equal Amount I.E. Balance 20% Valid For The Period As Asked By The Purchaser.Ii) The Bank Guarantee As Mentioned Above Should Be From A Nationalised Indian Bank/Schedule Commercial Bank In India. 2 Payment Terms For Turnkey Charges: As Per Ptc Of Specification Appended With This Tender. 3 Payment Of Civil Work: Payment For Construction Of A Room (Alongwith Suitable Ventilation, Flooring And Lighting) Shall Be Claimed By The Contractor As Follows:- (I) 80% Payment Of The Cost Of Construction Of Room As Per Speciï¬Cation Will Be Made On Issue Of Completion Certiï¬Cate By Consignee And Receipt Of Machine Of Site. (Ii) 20% Payment Of The Cost Will Be Made Upon Issue Of Ptc For Cnc Surface Wheel Lathe Machine. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 2 The Contract Shall Be Governed By The Conditions Of Tender Inquiry , Irs Conditions Of Contract, Speciï¬Cation Attached With This Tender. The Tender Inquiry Conditions, Speciï¬Cation & Special Conditions Of Contract (If Attached) Will Have Precedence Over The Irs Conditions And Conditions Specified In Tender Annexures. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 3 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 1 1.Bulk Or Full Order Will Be Placed On Normal Applicable To Yes Yes Allowed Manufacturers Or Its Authorized Agents Who All Bidders (Mandatory) Are Either Registered With Railway For Tendered Item Or Who Has Successfully Supplied (Supply Here Interprets To Supply, Installation & Commissioning Being M&P Item) Tendered Or Similar Item* (For Similarity Purpose Cnc Surface Wheel Lathe For A Railway Application. However, The Track Gauge And Wheel Diameter May Vary) To Zonal Railway/Pu/ Core/Psu/Other Govt. Department /Public Listed Company ( With Any Revision Of Speciï¬Cation/Drawing Or With DiffErent Size) In Last ϬVe ϬNancial Year And Current ϬNancial Year Up To Date Of Tender Opening. * For The Purpose Of Similarity Cnc Surface Wheel Lathe For A Railway Application. However, The Track Gauge And Wheel Diameter May Vary%U201d 2 .Performance Certiï¬Cate:- Performance Normal Applicable To Yes Yes Allowed Certiï¬Cate Of At Least One (01) No Of Such All Bidders (Mandatory) Machine (Which Are Counted For The Purpose Of Meeting Qualifying Criteria) Supplied (Supply Here Interprets To Supply, Installation & Commissioning Being M&P Item) In Last ϬVe Financial Year And Current ϬNancial Year Up To Date Of Tender Opening And Working Satisfactorily (However The Machine Must Have Completed One Year Of Satisfactory Working After Date Of Commissioning As On Original Date Of Closing Of Tender) Shall Be Enclosed With Clear Signature And Address Of The Purchaser/Firm Using The Machine Where It Is Installed And Commissioned. The Performance Certiï¬Cate Shall Not Be Older Than 01 Years From The Original Date Of Opening Of Tender. 3 All Necessary Information/ Supporting Normal Applicable To Yes Yes Allowed Documents Required For Establishing All Bidders (Mandatory) Performance Eligibility Criteria, As Proof Of Past Supply Credentials Shall Be Submitted By The Bidder Along With Original OffEr Itself And The Onus To Prove Successful Supply And Commissioning In The Stipulated Time Frame Lies On The Bidder. In Case No Information Or Incomplete Information Is Furnished By The Bidder Or Offers Submitting Credential Orders Unaccompanied With Proof Of Supply, Commissioning And Installation, Their OffEr Will Be Liable To Be Ignored. 4 In Case The Tenderer Is An Agent Of The Normal Applicable To Yes Yes Allowed Manufacturer, They Should Clearly Indicate All Bidders (Mandatory) The Same And Also Enclose Tender Speciï¬C Current Authorization Certiï¬Cate From The Manufacturer To This EffEct On The Letter Head Of Manufacturer And Also Mention The Place Where The Equipment Will Be OffEred For Pre Inspection Before Dispatch. 5. Compliance Conditions Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 4 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 1 All The Bidders/Tenders Should Ensure That Normal Applicable To No No Not Allowed They Are Gst Compliant And Their Quoted All Bidders Tax Structure/Rates Are As Per Gst Law. In Case The Successful Tenderer Is Not Liable To Be Registered Under Cgst/Igst/Utgst/Sgstact, The Railway Shall Deduct The Applicable Gst From His/Their Bills Under Reverse Charge Mechanism (Rcm) And Deposit The Same To The Concerned Tax Authority. 2 Sd Condition: Security Deposit Will Be 5% Of Normal Applicable To No No Not Allowed The Contract Value . Other Conditions Of Sd All Bidders Will Be As Per Clause 12 Of Section-Ii Of Nwr Tender Conditions 3 Emd Condition: As Per Clause 3 Of Section-I Normal Applicable To No No Not Allowed Of Nwr Tender Conditions All Bidders 4 Warranty Obligations: 1. The Warranty Normal Applicable To No No Not Allowed Obligations Shall Stand For 2 Years From All Bidders Installation, Commissioning And Proving Out Of Machine By Supplier (Details Shall Be Referred At Clause 7 Of Section Iv And Clause 16 Of Section V Of Speciï¬Cation Appended With The Tender. 5 Prove Out And Penalties Regarding Normal Applicable To No No Not Allowed Productivity Drop: As Per Clause 2.5 & 2.6 All Bidders Of Section Iv Of Specification Appended With This Tender. 6 Ca Certiï¬Cate: In Cases Of Procurement For Normal Applicable To Yes Yes Allowed A Value In Excess Of Rs. 10 Crores, The All Bidders (Optional) Class-I Local Supplier/ Class Ii Local Supplier Shall Be Required To Provide Certiï¬Cate From The Statutory Auditor Or Cost Auditor Of The Company (In The Case Of Companies) Or From A Practicing Cost Accountant Or Practicing Chartered Accountant (In Respect Of Suppliers Other Than Companies) Giving The Percentage Of Local Content. The Certiï¬Cate Should Have Valid Udin Mentioned In Certificate. 7 Micro And Small Enterprises ϬRms In Order Normal Applicable To No No Allowed To Avail Themselves Of Beneï¬Ts And All Bidders (Optional) Preferential Treatments, The Mses Must Be Registered With Any Of The Following: - (A) Udyam (Udyam Registration Certiï¬Cate). (B) Udyog Aadhar Memorandum (Note :- Terminal Date For Consideration Of This Certiï¬Cate Was Till 30.06.2022 Or As Extended By Ministry Of Micro, Small & Medium Enterprises From Time To Time. Thus This Certiï¬Cate (Udyog Aadhar Memorandum) Can Only Be Considered If The Above Terminal Date Is Further Extended Beyond 30.06.2022). Mses Registered With Above Agency/Agencies Must Attach (In The Template - Attach Documents On Techno-Commercial Bid Details Form, As Scanned Copy In Pdf Format) Their Current & Valid Registration Certiï¬Cate Along With Their OffEr. Other Conditions Shall Be As Per Para 4 Of Section-I Of Nwr Tender Condition Document 8 For ϬRms Not Seeking/Eligible For Earnest Normal Applicable To No No Not Allowed Money Exemption, Earnest Money As All Bidders Stipulated In The Notice For Invitation Of Tenders (Nit) Will Have To Be Paid Only Online Through Payment Gateway Link. No Other Mode Of Payment For Emd Is Acceptable. Page 5 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 9 Tenderer Should Mention In Their OffEr: - 1. Normal Applicable To No No Allowed Name Of Manufacture With Complete All Bidders (Optional) Address. 2. Place Of Inspection Be Indicated With Complete Address, Option For Inspections At Godowns/Outstation/Multiple Places Be Strictly Avoided, And Preferably Be Permitted Only At Manufacturers Place. 10 1. For Railway Speciï¬C Items Tender Speciï¬C Normal Applicable To Yes Yes Allowed Authorization Of Oem Is Required And For All Bidders (Optional) Other Than Railway Speciï¬C Items General Dealership/Authorization Of Oem Is Also Acceptable.The Tendered Item Is Non- Railway Specific Item 2. For Traders, Non Submission/Uploading Of Valid Oem Authorization Letter Will Make Their OffEr Invalid And OffEr Will Be Summarily Rejected. 11 Please Enter The Percentage Of Local Normal Applicable To No No Not Allowed Content In The Material Being OffEred. All Bidders Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. 12 1.Bidders Have To Quote Rates Of Each Of Normal Applicable To Yes Yes Allowed The Mentioned Items Individually In Pdf ϬLe All Bidders (Optional) Such As Concomitant Accessories, Any Other Concomitant Accessories, Spares For Two Year Normal Operation, Concomitant Works Etc (Whichever Applicable ) And The Quoted Cost Will Be Included For The Purpose Of Inter-Se Ranking And Commercial Evaluation Except For Optional Services/Spares/Consumable & Camc. 2. The Price Break Up Quoted By ϬRm Will Be Binding For The Purpose Of Post Contract Management/ Entering Into Separate Contract Based On This Contract. 13 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being OffEred. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Machine Shall Be Inspected And Tested Normal Applicable To No No Not Allowed During DiffErent Stages Of Its Manufacture All Bidders Starting From Raw Material Till The Completion Of Machine, By The Purchaser Or His Authorized Representative At The Suppliers Or His Sub-Suppliers Works. The Quality Assurance Plan As Per Annexure-I Of Section Vi Shall Be Submitted Along With The Bid. The Bidder Must Submit The Exhaustive Qap Incorporating The Tests As Given In Annexure-I Along With Other Tests /Stage Inspection As Followed By Them. 2 Railway Reserves The Right To Modify The Normal Applicable To No No Not Allowed Requirement Regarding Staged Inspection As All Bidders Per Applicable Str/Speciï¬Cation At Later Stage. 3 Bidders Are Required To Furnish Details Of Normal Applicable To No No Not Allowed Bought Out Items As Per Clause 14 Of All Bidders Section V Of Speciï¬Cation Appended With This Tender. Page 6 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 4 The Detailed Norms Regarding Insepction Normal Applicable To No No Not Allowed Shall Be Referred At Clause 9 Of Secton V Of All Bidders Specification Appended With This Tender. 5 Inspection Clause- 1. Inspection -Third Party Normal Applicable To No No Not Allowed Inspection (Tpi) For Indigenous All Bidders Product/Make . 2. Third Party Inspection Against Gc/Tc May Be Considered For Foreign Make/Brands, Indian Vendors Supplying Foreign Goods Or Goods Having Large Foreign Content. Documentary Evidence Will Be Required To Be Produced At The Time Of Inspection For The Part/Whole Assembly Which Has Been Claimed As Foreign Part/Whole Assembly. 6 The Applicable Testing/ Quality Assurance Normal Applicable To No No Not Allowed Program Will Be As Per Annexure-I (Quality All Bidders Assurance Plan) Contained In The Annexure- Speciï¬Cation (Corresponding To Each Demand/Item) Uploaded With The Nit. 7 Wherever The Inspecting Authority Is Normal Applicable To No No Not Allowed Speciï¬Ed In The Tender Documents, Bidders All Bidders Are Advised To Quote Accordingly. Offer With Any Deviation From Inspection Clause (As Per Applicability Detailed In Inspection Clause) Mentioned In Tender Will Be Summarily Rejected 8 Railway Reserves The Right To Modify The Normal Applicable To No No Not Allowed Requirement Regarding Staged Inspection As All Bidders Per Applicable Str/Speciï¬Cations At Later Stage. 9 In Case Of Tender Item Cannot Be Split Or Normal Applicable To No No Not Allowed Divided, Etc. The Mse Quoting A Price Within All Bidders The Band L1+15% May Be Awarded For Full/Complete Supply Of Total Tendered Value To Mse, Considering The Spirit Of The Policy For Enhancing Govt. Procurement From Mses. 10 F.O.R.:- Destination Normal Applicable To No No Not Allowed All Bidders 11 Service Facility In India And Techncial Normal Applicable To Yes Yes Allowed Support: The Tenderer Will Clearly Spell Out All Bidders (Optional) In The OffEr The Facilities Available With Him Or His Agent For Providing Adequate After- Sales Service In India During Warranty Period . The Complete Details Such As Organization For After Sales Service, Availability Of Technically Competent Engineers And Warehousing Facilities For Spares Should Be Clearly Indicated. Bidders Not OffEring Complete Servicing/Repair Facilities In India To Ensure Quick Response To Maintenance/ Servicing Calls Are Not Likely To Be Considered. Detailed Condition As Para Clause 13 Of Section V Of Specification Appended With The Tender 12 Purchaser Reserves The Right To Verify At Normal Applicable To Yes Yes Not Allowed Any Time, The Details Submitted By The All Bidders Bidder By Actual Site Visit. If The Information Furnished In The Bid Is Found To Be Incorrect During Veriï¬Cation, The Bid Shall Be Considered Invalid And Their Emd Shall Be Forfeited, And Necessary Action Will Be Initiated Including Suspending Business With North Western Railway. It Is The Bidders Responsibility To Ensure That The Information In The OffEr Remains Unchanged For The Validity Of The OffEr And Must Be Verifiable During This Period. Page 7 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 13 This Tender Complies With Public Normal Applicable To No No Not Allowed Procurement Policy Order,2017(Along With All Bidders Revisions/Addendums/Additions Issued From Time To Time ) With Respect To Make In India Policy. 14 The Delivery Speciï¬Ed In Tender Schedule Normal Applicable To No No Not Allowed Covers The Complete Time Period Required All Bidders For Supply, Installation & Commisssioning. 15 Foundation And Related Drawing, Approvals Normal Applicable To Yes No Not Allowed Of Ga, Foundation And Related Drawings: As All Bidders Per Clause 11 Of Section V Of Speciï¬Cation Appended With The Tender. 16 The Bidder Shall Furnish Along With The OffEr Normal Applicable To Yes Yes Allowed A List Of All Critical Items/ Sub- Assemblies All Bidders (Optional) Which Are Bought Out By The Bidder And Proposed To Be Used, Along With The Manufacturers Name, Brand Model Etc.The Manufacturer Shall Produce Invoices Of Bought Out Items/Sub-Assemblies To Ensure Genuineness Of Such Products / Veriï¬Cation By The Inspecting Agency. 17 Training:- Contractor Shall Train The Railway Normal Applicable To Yes Yes Not Allowed Staff Regarding Operation And Maintenance All Bidders Of Equipment During Commissioning Of M&P.(Detailed Training Norms Shall Be Referred At Clause 10 Of Section V Of Specification Appended With This Tender) Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 In Case The Clause Of Nit Instructs For Normal Applicable To No No Not Allowed Submission Of Requisite Document And The All Bidders Document Uploading Tab Corresponding To That Clause Has Been Deï¬Ned As -Not Allowed/Allowed(Optional) Shall Be Ignored And The Bidders Are Instructed To Upload The Requisite Document Invariably Along With Submitted Bid At Another Available Field For Document Uploading. 2 1. The Tenderer Should Quote Camc Rates Normal Applicable To No No Not Allowed Separately At The Designated ϬElds For The All Bidders Period Of 5 Years 2. For Tenders Containing Camc, The Charges Of Camc For ϬVe Years Would Also Be Included In The For Destination Price Quoted For M&P For The Purpose Of Comparative Evaluation Of Offer. 3.Tenderers Shall Note That Railway Reserves The Right To Settle And Place Purchase Order For Tendered Item With Or Without Camc Decision Of Railways Shall Be Final In This Regard. 4. With Reference To Post Contract Maintenance, This Tender Has Been Ϭ‚Oated Exclusively For Camc Requirement . Amc/Camc If Speciï¬Ed Elsewhere In Tender Document /Annexures Shall Be Read As Camc And Prices Are To Be Quoted Accordingly. 3 Speciï¬Cation For Cnc Surface Wheel Lathe Normal Applicable To No No Not Allowed Shall Be As Per The Speciï¬Cation Appended All Bidders With This Tender 4 The Section I, Ii & Iii(Sbd Nwr Document) Normal Applicable To No No Not Allowed Are Meant For Generalised Application All Bidders Wherein The Situation/Condition Has Been Not Deï¬Ned Elsewhere In Electronic Sor And Speciï¬Cation Appended With The Tender . Page 8 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 5 For Condition Speciï¬Ed In Electronic Sor, Normal Applicable To No No Not Allowed The Condition Speciï¬Ed In Elctronic Sor Will All Bidders Have Precedence Over Conditions Speciï¬Ed Elsewhere In Nit I.E Annexures Appended With The Tender. For Conditions Not Speciï¬Ed In Electronic Sor, The Conditions Specified In Annexures Will Prevail. 6 Delivery Schedule Chart: As Per Clause 7 Of Normal Applicable To No No Not Allowed Section Iv Of Speciï¬Cation Appended With All Bidders This Tender. 7 No Deviation Shall Be Permitted Against Normal Applicable To No No Not Allowed Leading Parameters Speciï¬Ed At Clause 2.2 All Bidders Of Section Iv Of Specification Appended With This Tender. Deviations Other Than The Leading Parameters, For Deviation If Any, (Other Than Leading/ Major Parameters Of Machine For Which No Deviations Shall Be Permissible) Bidders Are Required To Quote The Same Indicating Clause No. And Relevant Documents In The Statement For Commercial And Technical Deviations. Any Deviation Quoted Elsewhere Shall Not Be Considered And It Will Be Presumed That The Bid Meets/Complies The Tender Conditions. Bidders Need Not Quote Clause Wise Comments Against Various Clause Of Bid Document And May Only Quote Deviations Except For The Detail As Per Technical Bid Annexure-A Of Section Vi If Any, In The Respective Deviation Statement (This Condition Will Supersede The Corresponding Conditions Mentioned Elsewhere In Tender Documents). 8 For Traders, Non Submission/Uploading Of Normal Applicable To No No Not Allowed Valid Oem Authorization Letter Will Make All Bidders Their OffEr Invalid And OffEr Will Be Summarily Rejected. 9 The Price Break Up Quoted By ϬRm Will Be Normal Applicable To No No Not Allowed Binding For The Purpose Of Post Contract All Bidders Management/Entering Into Separate Contract Based On This Contract. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Whenever, Standard Technical Requirement Normal Applicable To No No Allowed Document Has Been Appended With The All Bidders (Optional) Tender Document, The Participants Are Required To Conduct Comprehensive Study Of The Technical Speciï¬Cations And Deviations If Any, Shall Be Indicated In The Designated Data Entry ϬEld Of Ireps Bid Submission Form. Technical Deviations Quoted Elsewhere Are Liable To Be Ignored. Page 9 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 2 Supply, Installation & Commissioning: The Normal Applicable To No No Not Allowed Contractor Shall Arrange Commissioning Of All Bidders The Equipment At The Consignee Premises. The Tenderers Shall Carry Out Necessary Proving Test To Demonstrate The Performance Of Equipment, After Its Successful Commissioning, To The Entire Satisfaction Of The Consignee Detail Mentioned In Clause 12 Of Section V Of Speciï¬Cation Attached With Tender. The Tenderer Should Quote Total Lump Sum Commission & Installation Charges For Each Unit Of Equipment. This Commission & Installation Charges Will Also Be Added In Their Quoted Total Unit Rate For The Purpose Of Inter-Se Ranking, Where Commission & Installation Is Required To Be Borne By The Tenderer As Per Tender Specification. 3 1 In Case Bidders Intends To Submit/Attach Normal Applicable To Yes Yes Allowed Catalogue (A Line Of Conï¬Rmation To Be All Bidders (Optional) Mentioned In The Ireps Bid That Supply Will Be As Per Attached Catalogue)Of The Offered Product. The Same May Be Attached Along With Submitted Bid For Better Appreciation Of Offered Product. 2 The Quality Assurance Programme As Per Annexure-I Shall Be Submitted Along With The Bid. The Bidder Must Submit The Exhaustive Qap Incorporating The Tests As Given In Annexure-I Along With Other Tests /Stage Inspection As Followed By Them. 3 Whenever, Standard Technical Requirement Document Has Been Appended With The Tender Document, The Participants Are Required Conduct Comprehensive Study Of The Technical Speciï¬Cations And Deviations If Any, Shall Be Indicated In The Designated Data Entry ϬEld Of Ireps Bid Submission Form. Technical Deviations Quoted Elsewhere Are Liable To Be Ignored. 4 Firm Shall Conduct Exhaustive Study Of The Annexures Present In The Attached Speciï¬Cation And Shall Submit Duly Signed Annexures Which Are Required At Bid Submission Stage. In Case The Same Is Not Submitted And No Deviation Has Been Submitted In The Designated ϬEld,As Mentioned Above, It Will Be Presumed That The ϬRm Has Signed All The Annexures And Agrees To Abide With All The Conditions Speciï¬Ed In Annexures. The Proformas Meant For Post Contract Stage May Be Ignored At Current Stage And Shall Be Utilized For Post Contract Activities 4 Tenderer Must Submit Clause Wise Normal Applicable To Yes Yes Allowed Compliance Of Technical Speciï¬Cations While All Bidders (Optional) Filling The Tender. Page 10 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 5 The Scope Of Supply Shall Include Design, Normal Applicable To Yes No Not Allowed Manufacture, And Supply, Installation, All Bidders Testing, Commissioning And Proving Of Machine On Turnkey Basis. It Includes All The Concomitant Accessories/Equipments As Detailed In The Speciï¬Cation And Other Concomitant Accessories/ Equipment, Which The Manufacturer Considers Essential To Make The Machine Fully Operational, When Installed And Commissioned. It Shall Also Include Installation And Commissioning Of Related Equipment, Training Of Personnel In Operation And Maintenance Of Machine And Supply Of Technical Documentation. The Machine Shall Have The Provisions Of Industrial 4.0. The ϬRm Needs To Provide Inbuilt Hardware (For Industrial 4.0) Capable Of Communicating Vital Parameters For Operations And Preventive Maintenance Of The Machine. Moreover, The ϬRm Will Connect The Machine To The Existing Industry 4.0 System At Carriage Workshop, Ajmer. The ϬRm Will Also Construct A Room (Along With Suitable Ventilation, Flooring And Lighting) Having Dimensions 5 Meter X 5 Meter X 4 Meter (L X B X H) And Structure Will Made In Rcc Column With Brick Wall And Rcc Roof. 6 Firm Shall Conduct Exhaustive Study Of The Normal Applicable To No No Allowed Annexures Present In The Annexure- All Bidders (Optional) Speciï¬Cation And Shall Submit Duly Signed Annexures Which Are Required At Bid Submission Stage. The Proformos Meant For Post Contract Stage May Be Ignored At Current Stage And Shall Be Utilized For Post Contract Activities. 7 List Of Components To Be Loaded On The Normal Applicable To Yes Yes Allowed Machine: As Per Annexure F Of Section Vi Of All Bidders (Optional) Specification Appended With The Tender. 8 The Bidder Must Submit The Technical OffEr Normal Applicable To Yes Yes Allowed As Per The Format Given In Annexure-A In All Bidders (Optional) Section - Vi. All The Information As Asked For, In The Format Must Be Given Accordingly E.G Wherever A Parametric Value Is Asked It Should Be Furnished, If A Write Up Is Asked For This Should Be Provided And If A Brochure Or Drawing Or Sketch Is Expected This Should Be Provided. In Case Of Incomplete/Sketchy/Illegible Information, The Technical OffEr Will Be Considered As Incomplete And Liable To Be Ignored. 9 Proving Test: As Per Clause 2.5 & 2.6 Of Normal Applicable To No No Not Allowed Section Iv Of Speciï¬Cation Appended With All Bidders This Tender. Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Participating Firm Undertakes That It Normal Applicable To No No Not Allowed Has Been Not Black All Bidders Listed/Suspended/Banned By Railways For Business Purpose. 2 Firm Undertakes That Careful Examination Normal Applicable To No No Not Allowed The Contents Of Po/Loa ( Whichever Is All Bidders Issued ϬRst) Will Be Conducted By ϬRm Within Ten Days Of The Issue Date Of Loa/Po And In Case Any Discrepancy Noted, Shall Make A Representation Within Ten Days Of The Date Of Po/Loa. Any Representation Thereafter For Dp Re- ϬXation On This Ground Will Not Be Entertained. Page 11 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 3 Participation In Tender Will Be Considered Normal Applicable To No No Not Allowed That Following Certiï¬Cate Has Been Signed All Bidders By All The Bidders Unless Otherwise Speciï¬Cally Mentioned In Its OffEr I Have Read The Clause Regarding Restrictions On Procurement From A Bidder Of A Country Which Shares A Land Border With India; I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country, Has Been Registered With The Competent Authority, I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. Note: Any False Declaration And Non-Compliance Of The Above Would Be A Ground For Immediate Termination Of The Contract And Further Legal Action In Accordance With The Law. 4 Participating ϬRm Undertakes That Quoted Normal Applicable To No No Not Allowed Technical Deviation With Respect To All Bidders Quantity/Parameter/Any Other Technical Speciï¬Cation Will Not AffEct The Smooth Operation, Functionality And Reliability Of The Equipment 5 We Hereby Declare That In Quoting The Normal Applicable To No No Not Allowed Above Price, We Have Taken Into Account All Bidders The Full EffEct Of Input Tax Credit Available Under Gst. We Further Agree To Pass On Any ϬNancial Gain/Beneï¬T As May Become Available In Future In Respect Of All The Input Tax Credit On The Date Of Supply By Way Of Reduction In Price And Advise The Purchaser (Railway) Accordingly. We Also Undertaken That We Are Aware Of The Provisions Of Section 171 Of The Cgst Act And Consequences Thereof If We Fail To Comply With The Same. The Contractor Shall Be Gst Complaint And Claim The Applicable Gst In Their Bills, Which Will Be Paid By The Railways 6 4. I/We Have Carefully Gone Through The Irs Normal Applicable To No No Not Allowed Conditions Of Contract (Included And All Bidders Uploaded Along With The Bid Document) Particularly Para 2500 Pertaining ToCode Of Integrity, Misdemeanor And Penalties. I/We Hereby Certify That Our No Aï¬Ƒliates/Sister Concerns As Indicated By Rdso Have Participated In This Tender Which Can Give Rise To A ConflIct Of Interest Or Fall Under Anti-Competitive Practices. We Understand That The OffErs Of All Such Aï¬Ƒliates/Sister Concerns Including Ours Are Liable To Be Rejected As Per Relevant Provisions Of Irs Terms And Conditions. I/We, Affirm That We Shall Abide By The Code Of Integrity In General, With Speciï¬C Reference To ConflIct Of Interest [Para 2502 (E)], Anti Competitive Practices [Para 2502(C)] And Obligation To Proactive Disclosures [Para 2503]. I/We Understand That We Are Fully Responsible For The Above Declaration And It Shall Not Be The Railways Responsibility To Verify The Same. I/We Are Aware That We Shall Be Liable For All Consequences Of Violation Of Code Of Integrity, If Detected, At Any Stage. 6. Documents Attached With Tender S.No. Document Name Document Description 1 4390879.Pdf Irs Condition 2 5229965.Pdf Specification 3 5337592.Pdf Nwr Sbd Page 12 Of 13 Run Date/Time: 07/04/2025 15:41:48Stores/North Western Rly Tender Document Tender No 65245040 Closing Date/Time 14/05/2025 14:25 The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm2 ( Rajendra Solanki ) , A Set Of Any Other Accessory Which In The Opinion Of Supplier Is Essentially Required For Making The Machine Fully Functional. Bidders Are Required To Attach The Price Break Up Of These Accessories/Spares In Pdf File Along With Submitted Bid. ] , Concomitant Works:- The Firm Will Also Construct A Room (Along With Suitable Ventilation, Floorin G And Lighting) Having Dimensions 5 Meter X 5 Meter X 4 Meter (L X B X H) And Structure Will Made In Rcc Column With Brick Wall And Rcc Roof As Per Clause 4 Of Section Iv Of Specification Appended With This Tender. The Cost Of These Works Shall Be Quoted Separately And The Cost Shall Be Included For The Purpose Of Commer Cial Evaluation. ] Sse/Wheel Shop Carriage Rajasthan 1.00 Numbers At (Location) Ajmer, Nwr

BRR:8295369 Engagement Of Third-Party Inspection Agency (Tpia) For 4 Nos Of Jobs At Ongc, Hazira. => Limited

BRR:8293019 Bids Are Invited For Custom Bid For Services - Third Party Re-Certification Audit For As9100d & Issuance Of As9100d Certification To Ade And Two Surveillance Audit ( One Full Certification Cycle) Hiring Of Agency For ISO Certification Service Total Quantity :

BRR:8292881 Bids Are Invited For Customized Amc/Cmc For Pre-Owned Products - As Per Scope Of Work; As Per Scope Of Work; Comprehensive Maintenance Contract (Cmc); As Per Scope Of Work; Yes LG 55 Inches Video Wall at Directors Conference Room-QTY 06 пов Make LG A 55inches Display Screen ATR- Panel Technology IPS, Aspect Ratio 16:09. Native Resolution 1920x1080 (FHD), Pixels (Hx V x 3): 6 x220x800, Brightness 700cd/m2, Contrast Ratio 1,400 1. Пупamic CR 500,000 1. Color gamut 72%, Viewing Angle (HxV) 178 x 178 Color depth: 1.00 Billion, Response Time lims Back to Back OEM AMC-OEM Authorization is Essential Polycom Video conference Equipment VC Model 1)Group-500-720 HD codec EagleEyelV-12x camera- Qty Of 2)Group 500-720 HD codec EagleEyelV-12x camera- Oty 01 3)Group 500-720 HD codec EagleEyelV-12x camera Qty 01 4)Group 500-720 HD codec EagleEyelV-12x camera- Qty 01 5Group-700 Comprehensive AMC ill End of Life declared by Manufacturer P002 Group 700,720,EE4-12.IN (P/N: 7200-64270-036)-Qty 01 6)Group-500 Comprehensive AMC till End of Life declared by Manufacturer-01 P001 Group 500,UK,720 (P/N: 7200-63430-102)-Qty 01 Back to Back OEM AMC-OEM Authorisation is Essentia Manpower Required 2 Engineers for maintenance of Audio Video Equipment Drona VC. Seminar Hall One Senior Engineer having BTech Qualification with 7 Years of experience to maintain Video Conference Room Equipment, Professional Cameras, Studio Editing Software tools, Digital Signage & Live streaming Software & Knowledge of Photoshop. In case of engineer is on leave backup engineer need to be provided One Senior Engineer having BTech Qualification with 5 Years experience to maintain Video Conference Room Equipment, Professional Camera & Knowledge of Networka, Switching, In case of engineer is on leave backup engineer need to be provided Scope of work & Terms and condilions Back-to-Back OEM Maintenance contract and immediate Backup support is mandatory with same Make and Models in case of any product repairs for the following products as it being used by highest authorties. Hardware and software support directly from the manufacturer in case of repairs and preventive maintenance, Attach OEM Authorized Certificate Manufacturers authorization for LG Video wall from LG India & HP Poly letter for VC for Set Up Ink signed authorization letters from OEM are to be enclosed along with the technical bid. The same shall be verified with the respective OEM for authenticity. Any deviation shall be treated as disqualification E All the equipment (hardware) preventive maintenance to be done during 1st week of every month along E with necessary software upgrades by OEM Only Transfer and Sub-letting: Bidder shall not engage any third party for support services other than equipmerit manufacturers. The bidder has no right to give, assign or sublet or otherwise dispose of the Contract or any part thereof, as well as to give or to let a third party lake benefit or advantage of the contract. Availability of Office of Service Provider: An Office of the service provider must be located in the state of Consignee in Hyderabad. Documentary Evidence To be Provided E In case of the break down/could not be rectified Manufacturers shall provide backup with the equivalent E or higher spare Only in exceptional cases maximum of 48 hours break down shall be allowed and the AMC period shall be extended proportionately without any additional charge, in addition, the AMC charges shall be deducted in proportion to every week of breakdown period or part thereof from the date. On site VC issues resolution from Monday to Saturday, Professional displays & video walls maintenance, RDP Media Players integration issues, Streaming and recording issues, network troubleshoot, network clocks should be resolve within 24 hours. In case of Engineer absence backup Engineer need to be provided. Any deviation to this will be attracted penalty. AMC Period: 2 Years Onsite AMC AMC shall be extended with the same terms and conditions, If found satisfactorily The payment will be made on Quarterly Basis Total Quantity :

BRR:8287094 Tender For Annual Plan-227/26 Electrification of Koliyottumala samskarika nilayam-Electrification of Koliyottumala Samskarika Nilayam under Nanmanda Grama panchayath-General Electrical Work - Electrification of Koliyottumala Samskarika Nilayam - Nanminda GP 2 1.10.2:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group B 3 1.11:Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 4 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire 5 1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 6 1.14.3:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire 7 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 8 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 9 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 10 1.25:Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 11 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 12 1.31:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 13 1.32:Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 14 1.33:Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 15 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. 16 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 17 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 18 90.3.21.3:Supply & installation of light fittings on C/U shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories andlamps etc. directly on wall using 2 nos. C/U brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture 19 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. 20 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply 21 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 22 90.5.1.4:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Musical bell with bird sound 23 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 24 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 25 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 26 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door 27 90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 28 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 29 1.56:Supplying and fixing suitable size Gl box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlets and 2 Nos. 5/6 A modular switches, connection etc. as required. (For light plugs to be used in non residential buildings). 30 90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator 31 OD294289/2025-2026:Charges for procurement, preparation and submission of application for availing single phase KSEB service connection with necessary sketch, Test and completion report, stamp fee etc including necessary liaison work as required. 32 OD294290/2025-2026:Supply and providing suitable iron hook grouted on wall for binding the service wire 33 OD294292/2025-2026:Supply, conveyance, installation, testing and commissioning of LED Bulk head fittings IP 65 directly on wall including cutting necessary holes, giving connections with the extended original wiring, making good the damages colour washing etc as required. (Philips/Bajaj/Havels/wipro) 34 OD294293/2025-2026:Supply, installation, testing and commissioning of the exhaust fans in the existing opening fixing necessary bolts and nuts making good the damages etc. as required including giving connections with required length of 24/0.20mm PVC insulated and PVC sheathed3 core round copper conductor flex wire conforming to relevant ISS.200mmlight duty exhaust fan in plastic body with self opening covers on 230V A/C supply 35 OD294296/2025-2026:Supplying and fixing 32 A, 2 Way neutral links mounted on DMC/SMC base with connections, in existing meter board and giving connection as required. 36 OD294297/2025-2026:Supplying and fixing 32A HRC Fuse with HRC Fuse link with connections, in existing meter board and giving connection as required. 37 OD294298/2025-2026:Supply and installation of dust and vermin proof, single phase syntax meter board (GS MB 3525)and to fix KSEB meters, fuse unit as required including fixing it on wall, making good the damages ,colour washing etc as required 38 OD294299/2025-2026:Supply and fixing 9 watt LED bulb in the existing batten holder as required 39 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 40 5.3:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. 41 5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) 42 2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts C curve DP MCB complete with connections, testing and commissioning etc. as required. 43 OD315726/2025-2026:Providing and fixing 2 x 25 x 3mm GI strip test joint for earthing system 44 2.10.3:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole 45 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 46 2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door 47 1.14.4:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 6 Sq.mm + 1 x 6 sq.mm earth wire 48 1.24.8:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.Bell push 49 1.21.3:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm 50 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

BRR:8286623 Tender For Rate Contract For The Period Of 2 Years For Availing Services Of Third-Party Inspection Agency (Tpi) For Inspection Of Various Materials For Cgd Network Of Mngl

BRR:8285889 Annual Plan- S0071/26 Mattool FHCRe-wiring-Mattool GP, Kalliyasseri Block -General Electrical Work -- 1 Mattool FHC Re-wiring-Mattool GP, Kalliyasseri Block 2 90.2.1.8:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Medium Point 3 90.2.1.10:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Medium point 4 90.2.1.11:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator - Medium Point. 5 90.2.1.13:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. 6 90.2.1.14:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent Plug - Medium Point 7 90.2.1.19:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Long point 8 90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps 9 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture 10 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. 11 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply 12 90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell 13 90.5.1.11:Bell indicator without box and cover 14 90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator 15 90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket 16 90.12.1.1:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium powercable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).2 core 4 sq mm 17 90.12.24.2:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.4 sq mm 18 90.12.7.1:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.2 core 4 sq mm with factory made clamp 19 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 20 90.15.4.5:Supply Conveyance, installation, testing and commissioning of 40W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 21 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 22 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 23 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire 24 1.14.2:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 25 1.14.3:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2 X 4 sq. mm + 1 X 4 sq. mm earth wire 26 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 27 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 28 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 29 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 30 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 31 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 32 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 33 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 34 1.27.5:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm) 35 1.38:Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required. 36 1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required. 37 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door 38 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 39 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 40 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 41 5.3:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required. 42 OD37090/2025-2026:Supplying , installing, testing and commissioning of 18 W (white)LED down light fittings round/square, surface/recess mountingwith lamp in ceiling and giving connections with3 core 16/0.2mm PVC insulated and sheathed round copper conductor flex wire as per the direction including charges for cutting, making holes in the false celing and make in good condition as required. 43 OD37091/2025-2026: Supply, conveyance, installation, testing and commissioning wall mounting fan of 400mm sweep sizes (Alminard or eqvt) using mounting brackets supplied along with the fan and giving connection with existing wire. 44 OD37304/2025-2026:Supplying and fixing of 10W LED lamp in existing batten holder (Havellsadore B22 cool day light LHLDERUEML8X010 or equivalent make, philips, osram, syska).

BRR:8284416 Bids Are Invited For Custom Bid For Services - Limited Tender For Providing Third Party Quality Assurance (Tpqa) For The Establishment Of Integrated Township, Administrative Office And Other Allied Infrastructures In Sambalpur District, Odisha Empanelment of Consultants/Service Providers Hiring of Consultancy Services - Percentage based Project Management Consultancy (PMC) Service Total Quantity :

BRR:8280335 Supply Of Oh Kit For Constant Contact Polymer Side Bearer Assembly To Drg. No. Aal - 021101, Alt-8 Consisting Of Following Items Conforming To Rdso Spec. No. Wd-38 Misc-2004, Rev-2 Of Nov-2022 (With Marking Details) Sl. No. 1 Description : Round Plate (Steel) With Stopper Spring, Item No. - 3 & 6, Qty. - 02 Nos. Sl. No. 2 Description : Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Description : Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101, Items 3,4,5 & 6, Alt : 8.Oh Kit For Constant Contact Polymer Side Bearer Assembly To Drg. No. Aal - 021101, Alt-8 Consisting Of Following Items Conforming To Rdso Spec. No. Wd-38 Misc-2004, Rev-2 Of Nov-2022 (With Marking Details) Sl. No. 1 Description : Round Plate (Steel) With Stopper Spring, Item No. - 3 & 6, Qty. - 02 Nos. Sl. No. 2 Description : Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Description : Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101, Items 3,4,5 & 6, Alt : 8.,Round Plate (Steel) With Stopper Spring, Item No. - 3 & 6, Qty. - 02 Nos. Sl. No. 2 Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101, Items 3,4,5 & 6, Alt : 8. 2. , Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101, Items 3,4,5 & 6, Alt : 8. 2. , Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101, Items 3,4,5 & 6, Alt : 8. 2. , Oh Kit For Constant Contact Polymer Side Bearer Assembly To Drg. No. Aal - 021101, Alt-8 Consisting Of Following Items Conforming To Rdso Spec. No. Wd-38 Misc-200 4, Rev-2 Of Nov-2022 (With Marking Details) Sl. No. 1 Round Plate (Steel) With Stopper Sp Ring, Item No. - 3 & 6, Qty. - 02 Nos. Sl. No. 2 Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101 , Items 3,4,5 & 6, Alt : 8. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Mechanical&General/Gtpl, Andhra Pradesh 8345.00 Set Consignee Scr Uvam Item Ref. ( Item Id :- 3100354 - Constant Contact Side Bearer For Rolling Stock , Sub Item Id:-3100354001 - Constant Contact Side Bearer For Casnub 22Hs Bogies, Casnub 22Hs(Mod-I) Bogies, Casnub 22Hs(Mod-Ii) Bogies ) Inspection Stage Inspection Not Required Details 3. T And C F.O.R Description Destination Delivery Period Page 1 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 1 Days Of Issue Of Contract, Supply To Be Completion : Within 12 Months Thereafter Completed In 04 Equal Installments Within 3/6/9/12 Months From The Date Of Issue Of Contract. Delivery Schedule Indicated In The Tender Schedule Is Tentative And May Vary As Per The Requirement Of Railway At The Time Of Releasing Purchase Order. Payment Terms S.No Description Payment Terms 1 95 Percent Payment Against Inspection Certiï¬Cate & Receipted Challan Duly Countersigned By Gazetted Officer And Balance 5 Percent On Acceptance Of Material. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 The Purchaser Shall Be Entitled To Vary The Order Quantity Upto(+)30% Anytime Within The Delivery Period(Including Extended Delivery Period) On The Same Terms And Conditions. The Increase In Quantity With Respect To The Tender Quantity Can Be Done Even At The Time Of Ordering And The Tenderer Shall Be Bound To Accept The Quantity So Ordered On The Basis Of His Original OffEr. The Purchaser Shall Be Entitled To Exercise (+)30% Option Clause In One Or More Than One Instalment As Long As The Total Variation In Quantity Does Not Exceed The Limit Of 30% Of Ordered Quantity. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 2 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 1 Bulk Purchase [Minimum 80 Percent Normal Applicable To Yes Yes Allowed Of Net Procurement Quantity] Will Be All Bidders (Optional) Made Only From Those Sources Who Are Appearing As Approved Vendors Of Rdso As Available On Uvam Against Rdso Sub Item Id : 3100354001. Wherever, Approving Agency Has Assessed The Capacity Cum Capability Of The ϬRm And Has Cleared The Source As Developmental Vendor For Placement Of Developmental Order, Developmental Order Up To 20% Of Npq May Be Placed On Such Sources Subject To Their Name Appearing As Developmental Vendors Of Rdso As Available On Uvam. The Status Of The ϬRm Will Be Reckoned As On The Date Of Tender Opening. Note: For Detailed Instructions Refer Para 3, General Tender Conditions (Updated Latest) Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/South Central Railway. 2 In Keeping With The Public Normal Applicable To Yes Yes Allowed Procurement (Preference To Make In All Bidders (Optional) India) Order, 2017, As Amended, It Has Been Found That There Is Suï¬Ƒcient Local Capacity And Competition In Supply Of The Tendered Item Of Required Quality And Therefore Public Procurement Of The Item Is Restricted To Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Please Go Through Tender Eligibility Normal Applicable To No No Not Allowed Criteria Before Submission Of Offer. All Bidders 2 Please Go Through Instructions To Normal Applicable To No No Not Allowed Tenderers And General Conditions Of All Bidders Tender Before Submission Of Offer. 3 Please Check That The OffEred Normal Applicable To No No Not Allowed Description Is Exactly As Per Tender All Bidders Description. Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 F.O.R. Destination. Normal Applicable To Yes Yes Allowed All Bidders (Optional) Page 3 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Goods And Service Tax Will Be Normal Applicable To Yes Yes Allowed Applicable As Per Para 22.1 To 22.8 Of All Bidders (Optional) Instructions To Tenderers For E-Tenders Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/South Central Railway. 3 Validity: OffEr Should Be Kept Valid Normal Applicable To Yes Yes Allowed For 120 Days. All Bidders (Optional) 4 Have You Attached Any Performance Normal Applicable To Yes Yes Allowed Statements With Your Offer? All Bidders (Optional) 5 Firm Willing To Avail Beneï¬Ts Of Micro Normal Applicable To Yes Yes Allowed And Small Enterprises, Must Submit All Bidders (Optional) Documentary Evidence Of Being Micro Or Small Enterprises For Tendered Item In The Certiï¬Cate Issued By Nodal Agencies As Per Public Procurement Policy, Failing Which ϬRms OffErs Will Be Treated As Non-Mse Firm. For Detailed Instructions Refer Para 15 Of General Tender Conditions Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/Scr. 6 Udyam Registration Certiï¬Cate Must Normal Applicable To Yes Yes Allowed Be Attached With OffEr If You Want To All Bidders (Mandatory) Claim Beneï¬Ts Under Public Procurement Policy For Micro/Small Enterprise. 7 Address Of Inspection To Be Normal Applicable To Yes Yes Not Allowed Mentioned In OffEr For Inspection By All Bidders Inspection Agency. 8 Splitting Clause: With Regard To Normal Applicable To Yes Yes Not Allowed Splitting Of Quantity Being Ordered On All Bidders More Than One Source As Indicated In General Tender Conditions, Is Applicable For This Tender. For Details Refer Para 2.2 Of General Tender Conditions. 9 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being Offered. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Inspection By Tpi. Purchaser Reserves Normal Applicable To No No Not Allowed The Right To ϬNalize The Tender With All Bidders Third Party Inspection As Per Annexure Indicating Special Conditions For Inspection Attached As Tender Document. Page 4 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Existing General Tender Conditions Normal Applicable To No No Not Allowed Covered For Inspection Of Product All Bidders Vide Para No.7.0 To 7.2. As Per Railway Board Guidelines, Para No. 7.3 Is Added Newly Duly Attaching As Annexure Iii For Operationalization Of Engagement Of Third-Party Inspection (Tpi) Agencies. 3 All Other Terms And Conditions As Per Normal Applicable To Yes Yes Allowed Irs Conditions Of Contract With Latest All Bidders (Optional) Amendments And Latest General Tender Conditions, Instructions To Tenderers As Attached With Nit And/Or Available In Public Documents Of South Central Railway Stores Department On Ireps Website Updated Latest As On Tender Opening Date. 4 If You Are Not A Mse Or A Consortia Of Normal Applicable To Yes Yes Allowed Mses Formed By Nsic, Please All Bidders (Optional) Indicate Percentage Of Sub Contracts In Execution Of This Tender That Will Be From Micro And Small Enterprise (In Percent Of Order Value) With Further Of Mse Owned By Sc/St. (Information Will Be Provided In % Terms With 6 ϬElds; Micro Owned By Sc, Micro Owned By St, Micro Owned By Others, Small Industry Owned By Sc, Small Industry Owned By St, Small Industry Owned By Others, Women Owned Mses). Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 It Will Be The Endeavour Of The Normal Applicable To No No Not Allowed Railways To Make Payments To ϬRms All Bidders Within 45 Days, From The Date Of Receipt Of Bills, Complete In All Respects & Submitted Alongwith All The Relevant/ Required Documents Including Modification Advice (If Any), Required For Passing Of The Bills. No Re-Scheduling/Re-ϬXation Of Delivery Period Will Be Granted, On Account Of Delay In Settlement Of Previous Payments, Due To The ϬRm. Firm Has To Ensure Supply Of Materials As Per The Delivery Schedule Given In The Purchase Order. Page 5 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Payment Of Emd Is Mandatory Normal Applicable To No No Not Allowed Except For Exemptions As Per Tender All Bidders Conditions For Emd W.E.F. 01.01.2022. Payment Of Emd Is Also Mandatory Where The ϬRm Has Been Disqualiï¬Ed From Exemption From Submission Of Emd/Sd, For All Tenders For Procurement Of Goods Issued By Any Unit Of Indian Railway, Due To Withdrawal Or Modiï¬Cation Of Bids During The Period Of Validity, Or If Being Called Upon To Submit The Performance Security/ Security Deposit, Fail To Submit The Performance Security/ Security Deposit Before The Deadline Deï¬Ned In The Request For Bid Document/Notice Inviting Tender As Per Extant Instructions. For Details See Para 13 Of Instructions To Tenderers 3 Security Deposit: Security Deposit Normal Applicable To No No Not Allowed (Sd)/Performance Security For Stores All Bidders Contracts Will Be Applicable As Under: (A) The Security Deposit Amount For This Tender Shall Be 5% Of The Value Of The Contract Subject To Max. Rs. 50 Lakhs. (B) There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Exemptions As Per Tender Conditions Attached With This Tender: (C) In Case Of Failure By Contractor To Meet Deliveries For Any Lot, Railways May Cancel The Contract For Defaulted Part By Forfeiting Sd Commensurate To That Lot. (D) Wherever Sd Has Been Exempted, For Any Reason, And The Supplier Fails To Supply Goods As Per Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By Way Of Penalty, An Amount Equal To Sd Amount, As Would Have Been Applicable If The Contract Was With A Non-Exempted Vendor. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 4 Warranty : 30 (Thirty) Months Normal Applicable To No No Not Allowed From The Month And Year Of All Bidders Manufacturing. 5 Bidders Quoting Abnormally Longer Normal Applicable To No No Not Allowed Delivery Periods Are Liable To Be All Bidders Rejected 6 OffErs With Longer Delivery Period Normal Applicable To No No Not Allowed And OffEring For Other Than For All Bidders Destination Are Liable To Be Passed Over. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 6 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 1 The OffEred Description Shall Be Normal Applicable To Yes Yes Allowed Exactly Same As Per Tendered Item All Bidders (Optional) Description Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Bidder Agrees To Supply The Normal Applicable To No No Not Allowed Tendered Stores At The Rates Quoted All Bidders By Him In Accordance With The Irs Conditions Of Contract And [Or] Special Conditions And [Or] Other Conditions Speciï¬Ed/Attached With The Tender. 2 The Bidder Conï¬Rms That Rates And Normal Applicable To No No Not Allowed Other ϬNancial Terms Quoted In All Bidders Relevant Columns Of ϬNancial Bid Will Only Be Ruling Terms For Acceptance And Such Terms Quoted Anywhere Else Will Be Ignored. 3 All The Bidders / Tenderers Should Normal Applicable To No No Not Allowed Ensure That They Are Gst Compliant All Bidders And Their Quoted Tax Structure / Rates Are As Per Gst Law. 4 All Vendors Should Have Gst Normal Applicable To No No Not Allowed Registration Number, (B) Gst Act All Bidders And Rules As Applicable From Time To Time Is Applicable, (C) No Bills Will Be Accepted Without Gst Registration. 5 Restrictions Under Rule 144(Xi) Of Normal Applicable To No No Not Allowed Gfrs-2017: All Bidders A) I Have Read The Clause Regarding Restrictions Under Rule 144(Xi) Of Gfrs- 2017 On Procurement From A Bidder Of A Country Which Shares A Land Border With India And As Detailed In Tender Documents. B) I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country,Has Been Registered With The Competent Authority. C) I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. [Wherever Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached]. Note: If The Tenderer Are Not Agreeable To Above Declarations, They Have To Categorically Mention About The Disagreement In Techno Commercial Deviation. Page 7 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 6 The Following Undertaking To Be Normal Applicable To No No Not Allowed Conï¬Rmed By Bidder While Submitting All Bidders The Bid. I/We Hereby Certify That None Of Our Allied/Sister Concerns/Aï¬Ƒliated ϬRms Have/Had Participated Other Than The Current Bid In This Tender For Item Wise-Consignee Wise Evaluation. I/We Understand That As Per Irs Clause 2500, The Involvement Of The Bidding ϬRm Or Any Of Its Aï¬Ƒliates In More Than One Bid For The Same Item/Consignee In The Procurement Is Considered A ConflIct Of Interest And A Violation Of The Code Of Integrity. I/We Have Read And Understood The Special Condition Related To Irs Clause 2500 In The Tender Document. If I Am/We Are Found To Violate The Said Clause, I/We Understand That I Am/We Are Liable To Face Penalties As Stipulated In Irs Clause 2505, Which Includes Rejection And Exclusion From The Tender Process, Apart From Other Penalties. 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration 3 To The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are 6 Fully Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department 7 Of Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided 8 In The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time 9 After The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With 10 The Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5359543.Pdf Instructions To Tenderers 2 5384561.Pdf Drawing 3 5359544.Pdf Third-Party Inspection Annexure - Iii 4 5283421.Pdf General Tender Conditions 7. Responsiveness Page 8 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 S.No. Description Firms, Who Are Eligible For Bulk Orders, Are To Quote For A Quantity Not Less Than 50% Of The Tendered 1 Quantity. OffErs For Quantity Less Than 50% Of Tendered Quantity Will Be Considered Unresponsive And The Offer Will Be Summarily Rejected. Validity Of OffEr: No Deviation From The OffEr Validity Period Stipulated In The Tender Is Permitted. 2 Validity Will Be Reckoned From The Closing Date Of Tender. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/M ( G Chiranjeevi Vidyasagar ) Page 9 Of 9 Run Date/Time: 04/06/2025 14:52:55 , Round Plate (Steel) With Stopper Sp Ring, Item No. - 3 & 6, Qty. - 02 Nos. Sl. No. 2 Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101 , Items 3,4,5 & 6, Alt : 8. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Mechanical&General/Gtpl, Andhra Pradesh 8345.00 Set Consignee Scr Uvam Item Ref. ( Item Id :- 3100354 - Constant Contact Side Bearer For Rolling Stock , Sub Item Id:-3100354001 - Constant Contact Side Bearer For Casnub 22Hs Bogies, Casnub 22Hs(Mod-I) Bogies, Casnub 22Hs(Mod-Ii) Bogies ) Inspection Stage Inspection Not Required Details 3. T And C F.O.R Description Destination Delivery Period Page 1 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 1 Days Of Issue Of Contract, Supply To Be Completion : Within 12 Months Thereafter Completed In 04 Equal Installments Within 3/6/9/12 Months From The Date Of Issue Of Contract. Delivery Schedule Indicated In The Tender Schedule Is Tentative And May Vary As Per The Requirement Of Railway At The Time Of Releasing Purchase Order. Payment Terms S.No Description Payment Terms 1 95 Percent Payment Against Inspection Certiï¬Cate & Receipted Challan Duly Countersigned By Gazetted Officer And Balance 5 Percent On Acceptance Of Material. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 The Purchaser Shall Be Entitled To Vary The Order Quantity Upto(+)30% Anytime Within The Delivery Period(Including Extended Delivery Period) On The Same Terms And Conditions. The Increase In Quantity With Respect To The Tender Quantity Can Be Done Even At The Time Of Ordering And The Tenderer Shall Be Bound To Accept The Quantity So Ordered On The Basis Of His Original OffEr. The Purchaser Shall Be Entitled To Exercise (+)30% Option Clause In One Or More Than One Instalment As Long As The Total Variation In Quantity Does Not Exceed The Limit Of 30% Of Ordered Quantity. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 2 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 1 Bulk Purchase [Minimum 80 Percent Normal Applicable To Yes Yes Allowed Of Net Procurement Quantity] Will Be All Bidders (Optional) Made Only From Those Sources Who Are Appearing As Approved Vendors Of Rdso As Available On Uvam Against Rdso Sub Item Id : 3100354001. Wherever, Approving Agency Has Assessed The Capacity Cum Capability Of The ϬRm And Has Cleared The Source As Developmental Vendor For Placement Of Developmental Order, Developmental Order Up To 20% Of Npq May Be Placed On Such Sources Subject To Their Name Appearing As Developmental Vendors Of Rdso As Available On Uvam. The Status Of The ϬRm Will Be Reckoned As On The Date Of Tender Opening. Note: For Detailed Instructions Refer Para 3, General Tender Conditions (Updated Latest) Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/South Central Railway. 2 In Keeping With The Public Normal Applicable To Yes Yes Allowed Procurement (Preference To Make In All Bidders (Optional) India) Order, 2017, As Amended, It Has Been Found That There Is Suï¬Ƒcient Local Capacity And Competition In Supply Of The Tendered Item Of Required Quality And Therefore Public Procurement Of The Item Is Restricted To Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Please Go Through Tender Eligibility Normal Applicable To No No Not Allowed Criteria Before Submission Of Offer. All Bidders 2 Please Go Through Instructions To Normal Applicable To No No Not Allowed Tenderers And General Conditions Of All Bidders Tender Before Submission Of Offer. 3 Please Check That The OffEred Normal Applicable To No No Not Allowed Description Is Exactly As Per Tender All Bidders Description. Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 F.O.R. Destination. Normal Applicable To Yes Yes Allowed All Bidders (Optional) Page 3 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Goods And Service Tax Will Be Normal Applicable To Yes Yes Allowed Applicable As Per Para 22.1 To 22.8 Of All Bidders (Optional) Instructions To Tenderers For E-Tenders Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/South Central Railway. 3 Validity: OffEr Should Be Kept Valid Normal Applicable To Yes Yes Allowed For 120 Days. All Bidders (Optional) 4 Have You Attached Any Performance Normal Applicable To Yes Yes Allowed Statements With Your Offer? All Bidders (Optional) 5 Firm Willing To Avail Beneï¬Ts Of Micro Normal Applicable To Yes Yes Allowed And Small Enterprises, Must Submit All Bidders (Optional) Documentary Evidence Of Being Micro Or Small Enterprises For Tendered Item In The Certiï¬Cate Issued By Nodal Agencies As Per Public Procurement Policy, Failing Which ϬRms OffErs Will Be Treated As Non-Mse Firm. For Detailed Instructions Refer Para 15 Of General Tender Conditions Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/Scr. 6 Udyam Registration Certiï¬Cate Must Normal Applicable To Yes Yes Allowed Be Attached With OffEr If You Want To All Bidders (Mandatory) Claim Beneï¬Ts Under Public Procurement Policy For Micro/Small Enterprise. 7 Address Of Inspection To Be Normal Applicable To Yes Yes Not Allowed Mentioned In OffEr For Inspection By All Bidders Inspection Agency. 8 Splitting Clause: With Regard To Normal Applicable To Yes Yes Not Allowed Splitting Of Quantity Being Ordered On All Bidders More Than One Source As Indicated In General Tender Conditions, Is Applicable For This Tender. For Details Refer Para 2.2 Of General Tender Conditions. 9 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being Offered. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Inspection By Tpi. Purchaser Reserves Normal Applicable To No No Not Allowed The Right To ϬNalize The Tender With All Bidders Third Party Inspection As Per Annexure Indicating Special Conditions For Inspection Attached As Tender Document. Page 4 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Existing General Tender Conditions Normal Applicable To No No Not Allowed Covered For Inspection Of Product All Bidders Vide Para No.7.0 To 7.2. As Per Railway Board Guidelines, Para No. 7.3 Is Added Newly Duly Attaching As Annexure Iii For Operationalization Of Engagement Of Third-Party Inspection (Tpi) Agencies. 3 All Other Terms And Conditions As Per Normal Applicable To Yes Yes Allowed Irs Conditions Of Contract With Latest All Bidders (Optional) Amendments And Latest General Tender Conditions, Instructions To Tenderers As Attached With Nit And/Or Available In Public Documents Of South Central Railway Stores Department On Ireps Website Updated Latest As On Tender Opening Date. 4 If You Are Not A Mse Or A Consortia Of Normal Applicable To Yes Yes Allowed Mses Formed By Nsic, Please All Bidders (Optional) Indicate Percentage Of Sub Contracts In Execution Of This Tender That Will Be From Micro And Small Enterprise (In Percent Of Order Value) With Further Of Mse Owned By Sc/St. (Information Will Be Provided In % Terms With 6 ϬElds; Micro Owned By Sc, Micro Owned By St, Micro Owned By Others, Small Industry Owned By Sc, Small Industry Owned By St, Small Industry Owned By Others, Women Owned Mses). Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 It Will Be The Endeavour Of The Normal Applicable To No No Not Allowed Railways To Make Payments To ϬRms All Bidders Within 45 Days, From The Date Of Receipt Of Bills, Complete In All Respects & Submitted Alongwith All The Relevant/ Required Documents Including Modification Advice (If Any), Required For Passing Of The Bills. No Re-Scheduling/Re-ϬXation Of Delivery Period Will Be Granted, On Account Of Delay In Settlement Of Previous Payments, Due To The ϬRm. Firm Has To Ensure Supply Of Materials As Per The Delivery Schedule Given In The Purchase Order. Page 5 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Payment Of Emd Is Mandatory Normal Applicable To No No Not Allowed Except For Exemptions As Per Tender All Bidders Conditions For Emd W.E.F. 01.01.2022. Payment Of Emd Is Also Mandatory Where The ϬRm Has Been Disqualiï¬Ed From Exemption From Submission Of Emd/Sd, For All Tenders For Procurement Of Goods Issued By Any Unit Of Indian Railway, Due To Withdrawal Or Modiï¬Cation Of Bids During The Period Of Validity, Or If Being Called Upon To Submit The Performance Security/ Security Deposit, Fail To Submit The Performance Security/ Security Deposit Before The Deadline Deï¬Ned In The Request For Bid Document/Notice Inviting Tender As Per Extant Instructions. For Details See Para 13 Of Instructions To Tenderers 3 Security Deposit: Security Deposit Normal Applicable To No No Not Allowed (Sd)/Performance Security For Stores All Bidders Contracts Will Be Applicable As Under: (A) The Security Deposit Amount For This Tender Shall Be 5% Of The Value Of The Contract Subject To Max. Rs. 50 Lakhs. (B) There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Exemptions As Per Tender Conditions Attached With This Tender: (C) In Case Of Failure By Contractor To Meet Deliveries For Any Lot, Railways May Cancel The Contract For Defaulted Part By Forfeiting Sd Commensurate To That Lot. (D) Wherever Sd Has Been Exempted, For Any Reason, And The Supplier Fails To Supply Goods As Per Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By Way Of Penalty, An Amount Equal To Sd Amount, As Would Have Been Applicable If The Contract Was With A Non-Exempted Vendor. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 4 Warranty : 30 (Thirty) Months Normal Applicable To No No Not Allowed From The Month And Year Of All Bidders Manufacturing. 5 Bidders Quoting Abnormally Longer Normal Applicable To No No Not Allowed Delivery Periods Are Liable To Be All Bidders Rejected 6 OffErs With Longer Delivery Period Normal Applicable To No No Not Allowed And OffEring For Other Than For All Bidders Destination Are Liable To Be Passed Over. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 6 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 1 The OffEred Description Shall Be Normal Applicable To Yes Yes Allowed Exactly Same As Per Tendered Item All Bidders (Optional) Description Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Bidder Agrees To Supply The Normal Applicable To No No Not Allowed Tendered Stores At The Rates Quoted All Bidders By Him In Accordance With The Irs Conditions Of Contract And [Or] Special Conditions And [Or] Other Conditions Speciï¬Ed/Attached With The Tender. 2 The Bidder Conï¬Rms That Rates And Normal Applicable To No No Not Allowed Other ϬNancial Terms Quoted In All Bidders Relevant Columns Of ϬNancial Bid Will Only Be Ruling Terms For Acceptance And Such Terms Quoted Anywhere Else Will Be Ignored. 3 All The Bidders / Tenderers Should Normal Applicable To No No Not Allowed Ensure That They Are Gst Compliant All Bidders And Their Quoted Tax Structure / Rates Are As Per Gst Law. 4 All Vendors Should Have Gst Normal Applicable To No No Not Allowed Registration Number, (B) Gst Act All Bidders And Rules As Applicable From Time To Time Is Applicable, (C) No Bills Will Be Accepted Without Gst Registration. 5 Restrictions Under Rule 144(Xi) Of Normal Applicable To No No Not Allowed Gfrs-2017: All Bidders A) I Have Read The Clause Regarding Restrictions Under Rule 144(Xi) Of Gfrs- 2017 On Procurement From A Bidder Of A Country Which Shares A Land Border With India And As Detailed In Tender Documents. B) I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country,Has Been Registered With The Competent Authority. C) I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. [Wherever Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached]. Note: If The Tenderer Are Not Agreeable To Above Declarations, They Have To Categorically Mention About The Disagreement In Techno Commercial Deviation. Page 7 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 6 The Following Undertaking To Be Normal Applicable To No No Not Allowed Conï¬Rmed By Bidder While Submitting All Bidders The Bid. I/We Hereby Certify That None Of Our Allied/Sister Concerns/Aï¬Ƒliated ϬRms Have/Had Participated Other Than The Current Bid In This Tender For Item Wise-Consignee Wise Evaluation. I/We Understand That As Per Irs Clause 2500, The Involvement Of The Bidding ϬRm Or Any Of Its Aï¬Ƒliates In More Than One Bid For The Same Item/Consignee In The Procurement Is Considered A ConflIct Of Interest And A Violation Of The Code Of Integrity. I/We Have Read And Understood The Special Condition Related To Irs Clause 2500 In The Tender Document. If I Am/We Are Found To Violate The Said Clause, I/We Understand That I Am/We Are Liable To Face Penalties As Stipulated In Irs Clause 2505, Which Includes Rejection And Exclusion From The Tender Process, Apart From Other Penalties. 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration 3 To The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are 6 Fully Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department 7 Of Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided 8 In The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time 9 After The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With 10 The Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5359543.Pdf Instructions To Tenderers 2 5384561.Pdf Drawing 3 5359544.Pdf Third-Party Inspection Annexure - Iii 4 5283421.Pdf General Tender Conditions 7. Responsiveness Page 8 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 S.No. Description Firms, Who Are Eligible For Bulk Orders, Are To Quote For A Quantity Not Less Than 50% Of The Tendered 1 Quantity. OffErs For Quantity Less Than 50% Of Tendered Quantity Will Be Considered Unresponsive And The Offer Will Be Summarily Rejected. Validity Of OffEr: No Deviation From The OffEr Validity Period Stipulated In The Tender Is Permitted. 2 Validity Will Be Reckoned From The Closing Date Of Tender. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/M ( G Chiranjeevi Vidyasagar ) Page 9 Of 9 Run Date/Time: 04/06/2025 14:52:55 , Pu Lining (Top& Bottom), Item No. - 4, Qty. - 01 Set. Sl. No. 3 Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101 , Items 3,4,5 & 6, Alt : 8. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Mechanical&General/Gtpl, Andhra Pradesh 8345.00 Set Consignee Scr Uvam Item Ref. ( Item Id :- 3100354 - Constant Contact Side Bearer For Rolling Stock , Sub Item Id:-3100354001 - Constant Contact Side Bearer For Casnub 22Hs Bogies, Casnub 22Hs(Mod-I) Bogies, Casnub 22Hs(Mod-Ii) Bogies ) Inspection Stage Inspection Not Required Details 3. T And C F.O.R Description Destination Delivery Period Page 1 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 Description Delivery /Completion Rate Of Supply For All Items Commencement : Within 1 Days Of Issue Of Contract, Supply To Be Completion : Within 12 Months Thereafter Completed In 04 Equal Installments Within 3/6/9/12 Months From The Date Of Issue Of Contract. Delivery Schedule Indicated In The Tender Schedule Is Tentative And May Vary As Per The Requirement Of Railway At The Time Of Releasing Purchase Order. Payment Terms S.No Description Payment Terms 1 95 Percent Payment Against Inspection Certiï¬Cate & Receipted Challan Duly Countersigned By Gazetted Officer And Balance 5 Percent On Acceptance Of Material. Statutory Variation Clause S.No Description 1 Statutory Variation In Taxes And Duties, Or Fresh Imposition Of Taxes And Duties By State/ Central Governments In Respect Of The Items Stipulated In The Contract (And Not The Raw Materials Thereof), Within The Original Delivery Period Stipulated In The Contract, Or Last Unconditionally Extended Delivery Period Shall Be To Railways Account. Only Such Variation Shall Be Admissible Which Takes Place After The Submission Of Bid. No Claim On Account Of Statutory Variation In Respect Of Existing Tax/Duty Will Be Accepted Unless The Tenderer Has Clearly Indicated In His OffEr The Rate Of Tax/Duty Considered In His Quoted Rate. No Claim On Account Of Statutory Variation Shall Be Admissible On Account Of Misclassification By The Supplier/ Contractor. Option Clause S.No Description 1 The Purchaser Shall Be Entitled To Vary The Order Quantity Upto(+)30% Anytime Within The Delivery Period(Including Extended Delivery Period) On The Same Terms And Conditions. The Increase In Quantity With Respect To The Tender Quantity Can Be Done Even At The Time Of Ordering And The Tenderer Shall Be Bound To Accept The Quantity So Ordered On The Basis Of His Original OffEr. The Purchaser Shall Be Entitled To Exercise (+)30% Option Clause In One Or More Than One Instalment As Long As The Total Variation In Quantity Does Not Exceed The Limit Of 30% Of Ordered Quantity. Standard Governing Conditions S.No Description 1 Irs Conditions Of Contract: The Contract Shall Be Governed By Latest Version (Along With All Correction Slips) Of Irs Conditions Of Contract, And All Other Terms And Conditions Incorporated In The Tender Documents. 4. Eligibility Conditions Special Eligibility Criteria S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 2 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 1 Bulk Purchase [Minimum 80 Percent Normal Applicable To Yes Yes Allowed Of Net Procurement Quantity] Will Be All Bidders (Optional) Made Only From Those Sources Who Are Appearing As Approved Vendors Of Rdso As Available On Uvam Against Rdso Sub Item Id : 3100354001. Wherever, Approving Agency Has Assessed The Capacity Cum Capability Of The ϬRm And Has Cleared The Source As Developmental Vendor For Placement Of Developmental Order, Developmental Order Up To 20% Of Npq May Be Placed On Such Sources Subject To Their Name Appearing As Developmental Vendors Of Rdso As Available On Uvam. The Status Of The ϬRm Will Be Reckoned As On The Date Of Tender Opening. Note: For Detailed Instructions Refer Para 3, General Tender Conditions (Updated Latest) Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/South Central Railway. 2 In Keeping With The Public Normal Applicable To Yes Yes Allowed Procurement (Preference To Make In All Bidders (Optional) India) Order, 2017, As Amended, It Has Been Found That There Is Suï¬Ƒcient Local Capacity And Competition In Supply Of The Tendered Item Of Required Quality And Therefore Public Procurement Of The Item Is Restricted To Class I Local Suppliers Only And The Vendors Who Do Not Qualify To Be Class I Local Suppliers Should Not Quote In The Tender As Their OffErs Shall Not Be Considered For Any Ordering. In Case Any Vendor Who Does Not Qualify To Be A Class I Local Supplier For The Tendered Item Participates In The Tender It Does So At Its Own Risk And Cost And Railways Shall Not Be Liable For Any Loss Or Damage Caused To The Vendor. 5. Compliance Conditions Check List S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Please Go Through Tender Eligibility Normal Applicable To No No Not Allowed Criteria Before Submission Of Offer. All Bidders 2 Please Go Through Instructions To Normal Applicable To No No Not Allowed Tenderers And General Conditions Of All Bidders Tender Before Submission Of Offer. 3 Please Check That The OffEred Normal Applicable To No No Not Allowed Description Is Exactly As Per Tender All Bidders Description. Commercial-Compliance S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 F.O.R. Destination. Normal Applicable To Yes Yes Allowed All Bidders (Optional) Page 3 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Goods And Service Tax Will Be Normal Applicable To Yes Yes Allowed Applicable As Per Para 22.1 To 22.8 Of All Bidders (Optional) Instructions To Tenderers For E-Tenders Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/South Central Railway. 3 Validity: OffEr Should Be Kept Valid Normal Applicable To Yes Yes Allowed For 120 Days. All Bidders (Optional) 4 Have You Attached Any Performance Normal Applicable To Yes Yes Allowed Statements With Your Offer? All Bidders (Optional) 5 Firm Willing To Avail Beneï¬Ts Of Micro Normal Applicable To Yes Yes Allowed And Small Enterprises, Must Submit All Bidders (Optional) Documentary Evidence Of Being Micro Or Small Enterprises For Tendered Item In The Certiï¬Cate Issued By Nodal Agencies As Per Public Procurement Policy, Failing Which ϬRms OffErs Will Be Treated As Non-Mse Firm. For Detailed Instructions Refer Para 15 Of General Tender Conditions Attached With Nit And/Or Available As Public Document On Ireps Website Goods And Services/Scr. 6 Udyam Registration Certiï¬Cate Must Normal Applicable To Yes Yes Allowed Be Attached With OffEr If You Want To All Bidders (Mandatory) Claim Beneï¬Ts Under Public Procurement Policy For Micro/Small Enterprise. 7 Address Of Inspection To Be Normal Applicable To Yes Yes Not Allowed Mentioned In OffEr For Inspection By All Bidders Inspection Agency. 8 Splitting Clause: With Regard To Normal Applicable To Yes Yes Not Allowed Splitting Of Quantity Being Ordered On All Bidders More Than One Source As Indicated In General Tender Conditions, Is Applicable For This Tender. For Details Refer Para 2.2 Of General Tender Conditions. 9 Please Enter The Percentage Of Local Normal Applicable To No Yes Allowed Content In The Material Being Offered. All Bidders (Optional) Please Enter 0 For Fully Imported Items, And 100 For Fully Indigenous Items. The Deï¬Nition And Calculation Of Local Content Shall Be In Accordance With The Make In India Policy As Incorporated In The Tender Conditions. Other Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 Inspection By Tpi. Purchaser Reserves Normal Applicable To No No Not Allowed The Right To ϬNalize The Tender With All Bidders Third Party Inspection As Per Annexure Indicating Special Conditions For Inspection Attached As Tender Document. Page 4 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Existing General Tender Conditions Normal Applicable To No No Not Allowed Covered For Inspection Of Product All Bidders Vide Para No.7.0 To 7.2. As Per Railway Board Guidelines, Para No. 7.3 Is Added Newly Duly Attaching As Annexure Iii For Operationalization Of Engagement Of Third-Party Inspection (Tpi) Agencies. 3 All Other Terms And Conditions As Per Normal Applicable To Yes Yes Allowed Irs Conditions Of Contract With Latest All Bidders (Optional) Amendments And Latest General Tender Conditions, Instructions To Tenderers As Attached With Nit And/Or Available In Public Documents Of South Central Railway Stores Department On Ireps Website Updated Latest As On Tender Opening Date. 4 If You Are Not A Mse Or A Consortia Of Normal Applicable To Yes Yes Allowed Mses Formed By Nsic, Please All Bidders (Optional) Indicate Percentage Of Sub Contracts In Execution Of This Tender That Will Be From Micro And Small Enterprise (In Percent Of Order Value) With Further Of Mse Owned By Sc/St. (Information Will Be Provided In % Terms With 6 ϬElds; Micro Owned By Sc, Micro Owned By St, Micro Owned By Others, Small Industry Owned By Sc, Small Industry Owned By St, Small Industry Owned By Others, Women Owned Mses). Special Conditions S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 It Will Be The Endeavour Of The Normal Applicable To No No Not Allowed Railways To Make Payments To ϬRms All Bidders Within 45 Days, From The Date Of Receipt Of Bills, Complete In All Respects & Submitted Alongwith All The Relevant/ Required Documents Including Modification Advice (If Any), Required For Passing Of The Bills. No Re-Scheduling/Re-ϬXation Of Delivery Period Will Be Granted, On Account Of Delay In Settlement Of Previous Payments, Due To The ϬRm. Firm Has To Ensure Supply Of Materials As Per The Delivery Schedule Given In The Purchase Order. Page 5 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 2 Payment Of Emd Is Mandatory Normal Applicable To No No Not Allowed Except For Exemptions As Per Tender All Bidders Conditions For Emd W.E.F. 01.01.2022. Payment Of Emd Is Also Mandatory Where The ϬRm Has Been Disqualiï¬Ed From Exemption From Submission Of Emd/Sd, For All Tenders For Procurement Of Goods Issued By Any Unit Of Indian Railway, Due To Withdrawal Or Modiï¬Cation Of Bids During The Period Of Validity, Or If Being Called Upon To Submit The Performance Security/ Security Deposit, Fail To Submit The Performance Security/ Security Deposit Before The Deadline Deï¬Ned In The Request For Bid Document/Notice Inviting Tender As Per Extant Instructions. For Details See Para 13 Of Instructions To Tenderers 3 Security Deposit: Security Deposit Normal Applicable To No No Not Allowed (Sd)/Performance Security For Stores All Bidders Contracts Will Be Applicable As Under: (A) The Security Deposit Amount For This Tender Shall Be 5% Of The Value Of The Contract Subject To Max. Rs. 50 Lakhs. (B) There Shall Be No Exemption From Submission Of Security Deposit (Sd) For Any Tender Or By Any Tenderer Except Exemptions As Per Tender Conditions Attached With This Tender: (C) In Case Of Failure By Contractor To Meet Deliveries For Any Lot, Railways May Cancel The Contract For Defaulted Part By Forfeiting Sd Commensurate To That Lot. (D) Wherever Sd Has Been Exempted, For Any Reason, And The Supplier Fails To Supply Goods As Per Conditions Of Contract, As Amended From Time To Time, Purchaser Shall Have Right To Levy Damages From The Supplier For Failing To Comply With The Contractual Conditions, Not By Way Of Penalty, An Amount Equal To Sd Amount, As Would Have Been Applicable If The Contract Was With A Non-Exempted Vendor. These Damages Shall Be Treated As Recoveries Outstanding Against The Vendor And Dealt With Accordingly. 4 Warranty : 30 (Thirty) Months Normal Applicable To No No Not Allowed From The Month And Year Of All Bidders Manufacturing. 5 Bidders Quoting Abnormally Longer Normal Applicable To No No Not Allowed Delivery Periods Are Liable To Be All Bidders Rejected 6 OffErs With Longer Delivery Period Normal Applicable To No No Not Allowed And OffEring For Other Than For All Bidders Destination Are Liable To Be Passed Over. Technical-Compliances S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading Page 6 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 1 The OffEred Description Shall Be Normal Applicable To Yes Yes Allowed Exactly Same As Per Tendered Item All Bidders (Optional) Description Undertakings S.No. Description Template Condition Confirmation Remarks Documents Applicability Required Allowed Uploading 1 The Bidder Agrees To Supply The Normal Applicable To No No Not Allowed Tendered Stores At The Rates Quoted All Bidders By Him In Accordance With The Irs Conditions Of Contract And [Or] Special Conditions And [Or] Other Conditions Speciï¬Ed/Attached With The Tender. 2 The Bidder Conï¬Rms That Rates And Normal Applicable To No No Not Allowed Other ϬNancial Terms Quoted In All Bidders Relevant Columns Of ϬNancial Bid Will Only Be Ruling Terms For Acceptance And Such Terms Quoted Anywhere Else Will Be Ignored. 3 All The Bidders / Tenderers Should Normal Applicable To No No Not Allowed Ensure That They Are Gst Compliant All Bidders And Their Quoted Tax Structure / Rates Are As Per Gst Law. 4 All Vendors Should Have Gst Normal Applicable To No No Not Allowed Registration Number, (B) Gst Act All Bidders And Rules As Applicable From Time To Time Is Applicable, (C) No Bills Will Be Accepted Without Gst Registration. 5 Restrictions Under Rule 144(Xi) Of Normal Applicable To No No Not Allowed Gfrs-2017: All Bidders A) I Have Read The Clause Regarding Restrictions Under Rule 144(Xi) Of Gfrs- 2017 On Procurement From A Bidder Of A Country Which Shares A Land Border With India And As Detailed In Tender Documents. B) I Certify That This Bidder Is Not From Such A Country Or, If From Such A Country,Has Been Registered With The Competent Authority. C) I Hereby Certify That This Bidder Fulï¬Lls All Requirements In This Regard And Is Eligible To Be Considered. [Wherever Applicable, Evidence Of Valid Registration By The Competent Authority Shall Be Attached]. Note: If The Tenderer Are Not Agreeable To Above Declarations, They Have To Categorically Mention About The Disagreement In Techno Commercial Deviation. Page 7 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 6 The Following Undertaking To Be Normal Applicable To No No Not Allowed Conï¬Rmed By Bidder While Submitting All Bidders The Bid. I/We Hereby Certify That None Of Our Allied/Sister Concerns/Aï¬Ƒliated ϬRms Have/Had Participated Other Than The Current Bid In This Tender For Item Wise-Consignee Wise Evaluation. I/We Understand That As Per Irs Clause 2500, The Involvement Of The Bidding ϬRm Or Any Of Its Aï¬Ƒliates In More Than One Bid For The Same Item/Consignee In The Procurement Is Considered A ConflIct Of Interest And A Violation Of The Code Of Integrity. I/We Have Read And Understood The Special Condition Related To Irs Clause 2500 In The Tender Document. If I Am/We Are Found To Violate The Said Clause, I/We Understand That I Am/We Are Liable To Face Penalties As Stipulated In Irs Clause 2505, Which Includes Rejection And Exclusion From The Tender Process, Apart From Other Penalties. 6. Bidders Shall Confirm And Certify On The Behalf Of The Tenderer Including Its Constituents As Under: S.No. Description 1 I/We The Tenderer (S) Am/Are Signing This Document After Carefully Reading The Contents. 2 I/We The Tenderer(S) Also Accept All The Conditions Of The Tender And Have Signed All The Pages In Confirmation Thereof. I/We Hereby Declare That I/We Have Downloaded The Tender Documents From Indian Railway Website Www.Ireps.Gov.In . I/We Have Verified The Content Of The Document From The Website And There Is No Addition, No Deletion Or No Alteration 3 To The Content Of The Tender Document. In Case Of Any Discrepancy Noticed At Any Stage I.E. Evaluation Of Tenders, Execution Of Contract Or Payment, The Master Copy Available With The Railway Administration Shall Be Final And Binding Upon Me/Us. I/We Declare And Certify That I/We Have Not Made Any Misleading Or False Representation In The Forms, Statements And 4 Attachments In Proof Of The Qualification Requirements. I/We Also Understand That My/Our Offer Will Be Evaluated Based On The Documents/Credentials Submitted Along With The 5 Offer And Same Shall Be Binding Upon Me/Us. I/We Declare That The Information And Documents Submitted Along With The Tender By Me/Us Are Correct And I/We Are 6 Fully Responsible For The Correctness Of The Information And Documents, Submitted By Us. I/We Certify That I/We The Tenderer(S) Is/Are Not Blacklisted Or Debarred By Railways Or Any Other Ministry / Department 7 Of Govt. Of India From Participation In Tender On The Date Of Submission Of Bids, Either In Individual Capacity Or As A Huf/ Member Of The Partnership Firm/Llp/Jv/Society/Trust. I/We Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be Forged/False At Any Time During Process For Evaluation Of Tenders, It Shall Lead To Forfeiture Of The Emd And May Also Lead To Any Other Action Provided 8 In The Contract Including Banning Of Business For A Period Of Upto Two Year. Further, I/We And All My/Our Constituents Understand That My/Our Offer Shall Be Summarily Rejected. I/We Also Understand That If The Contents Of The Certificate Submitted By Us Are Found To Be False/Forged At Any Time 9 After The Award Of The Contract, It Will Lead To Termination Of The Contract, Along With Forfeiture Of Security Deposit And May Also Lead To Any Other Action Provided In The Contract Including Banning Of Business For A Period Of Upto Two Year. I/We Have Read The Clause Regarding Restriction On Procurement From A Bidder Of A Country Which Shares A Land Border With India And Certify That I Am/We Are Not From Such A Country Or, If From Such A Country, Have Been Registered With 10 The Competent Authority. I/We Hereby Certify That I/We Fulfil All The Requirements In This Regard And Am/Are Eligible To Be Considered (Evidence Of Valid Registration By The Competent Authority Is Enclosed) 7. Documents Attached With Tender S.No. Document Name Document Description 1 5359543.Pdf Instructions To Tenderers 2 5384561.Pdf Drawing 3 5359544.Pdf Third-Party Inspection Annexure - Iii 4 5283421.Pdf General Tender Conditions 7. Responsiveness Page 8 Of 9 Run Date/Time: 04/06/2025 14:52:55Stores/South Central Rly Tender Document Tender No 38252120 Closing Date/Time 30/06/2025 14:30 S.No. Description Firms, Who Are Eligible For Bulk Orders, Are To Quote For A Quantity Not Less Than 50% Of The Tendered 1 Quantity. OffErs For Quantity Less Than 50% Of Tendered Quantity Will Be Considered Unresponsive And The Offer Will Be Summarily Rejected. Validity Of OffEr: No Deviation From The OffEr Validity Period Stipulated In The Tender Is Permitted. 2 Validity Will Be Reckoned From The Closing Date Of Tender. The Tenderers In Their Bid Shall Indicate The Details Of Their Gst Jurisdictional Assessing Officers (Designation, Address & Email Id). In Case Of A Contract Award, A Copy Of Purchase Order Shall Be Immediately Forwarded By Purchaser To The Gst Jurisdictional Assessing Officer Mentioned In Tenderers Bid This Tender Complies With Public Procurement Policy (Make In India) Order 2017, Dated 15/06/2017, Issued By Department Of Industrial Promotion And Policy, Ministry Of Commerce, Circulated Vide Railway Board Letter No. 2015/Rs(G)/779/5 Dated 03/08/2017 And 27/12/2017 And Amendments/ Revisions Thereof. As A Tender Inviting Authority, The Undersigned Has Ensured That The Issue Of This Tender Does Not Violate Provisions Of Gfr Regarding Procurement Through Gem. Digitally Signed By Dy.Cmm/M ( G Chiranjeevi Vidyasagar ) Page 9 Of 9 Run Date/Time: 04/06/2025 14:52:55 , Poly Rings - 3, Item No. - 5, Qty. - 03 Nos. To Aal Drg No : Aal-021101 , Items 3,4,5 & 6, Alt : 8. [ Warranty Period: 30 Months After The Date Of Delivery ] [Quantity Tolerance (+/-): 5 %Age , Item Category : Normal , Total Po Value Variation Permitt Ed: Max 8 Lacs ] ] Mechanical&General/Gtpl, Andhra Pradesh 8345.00 Set

BRR:8279894 tender for Annual Operation Maintenance And Emergent Repair Of Pipe Line Of Distribution System And Rising Main And Iep Of Uttar Chandipur Zone-Ii At Manikchak Dev. Block Under Malda Division, Phe Dte. In The District Of Malda For 1 (One) Year. - Annual Operation Maintenance & Emergent repair of pipe line of distribution system & Rising main and IEP of UTTAR CHANDIPUR ZONE-II at Manikchak Dev. Block under Malda Division, PHE Dte. in the District of Malda [For 1 (one) Year]. Sl. No. Item Description 1 Daily operation and maintenance by opening and closing different diameter Sluice valve for smooth water supply from R.C.C. Elevated Reservoir or by direct pumping to different places along the alignment of the rising main and distribution main at different places over the command area daily as and when required for regulating the supply of water and distributing water all over the command are smoothly including changing and restoration of gland packing of sluice valve, air valve if required including opening the cap/plug of wash out point or opening the sluice valves including de-jointing flange joints including pipe line reparing works and cleaning the pipeline or changing of gate, spindle or liner etc. of sluice valves all complete, restoration works to be done including earth work in excavation bailing out of water, re-filling the excavated earth, taking out of RCC slab or slab cover and refaxing true to position etc. all complete as per the specification and direction of EIC.Note:- 1) Contractor have to pay Rs. 465.00/head/day to the Labourers engaged as Pump Operator/ Valve Operator/ Guards excluding 8.33% Bonus.2) Bonus @ 8.33% should be given as per rules.Rate Analysis for ESIC & EPF with Ref Addendum No 01/2023 dated 21.02.2023 of CE-Planning & WQM, PHED.(Rate Analysis Attached)3) Final Rate will be based onactual EPF & ESIC remmited. 2 Operation and Maintenance of IRP plant (Pressure type including providing an experienced operator including regular back wash by operation of compressor and blower machine etc. complete as per direction of EIC. Note:- 1)Contractor have to pay Rs. 487.00/head/day to the Labourers engaged as Pump Operator/ Valve Operator/ Guards excluding 8.33% Bonus.2) Bonus @ 8.33% should be given as per rules.Rate Analysis for ESIC & EPF with Ref Memo No PHE/1095/O-5/16(Pt.) dated 22.05.20253) Final Rate will be based onactual EPF & ESIC remmited. 3 Reimbersement of operators/Guard payment as per EPF & ESIC rules.Note:- 1) Pump Operator/ Valve Operator/ Guards are entitled to get a weekly day of with a prior approval of the JE/AE in charge or will be paid as per the existing rules.2) Payment will be made as per actual basis. Duly approved leave details & vouchers (if required) need to be submitted for payment. (Rate Analysis Attached) 4 Earth work in filling in compound tank, low land, ditches etc. with good earth in layers not exceeding 15cm. Including breaking clods light ramming and dressing on desired profile (Payment to be made on profile measurement before and after work).(a) With carried earth supplied by the Contractor within a radius of 3 K.M. including cost of carried earth. 5 Bituminous pucca road (approx. 450mm depth) cutting by using gaiti, chisel, hammer etc. and picking up the withdrawing excavated materials and remove the same within distance of 30mtr. at least all complete for fixing/crossing all dia of pipe line as per direction of EIC. 6 Dismantling all type of plain cement concrete works, stacking serviceable materials of site and removing rubbish as directed within a lead of 75mtr. for laying all dia pipe line in ground floor, a) upto 150mm thick. 7 b) above 150 mm thickness 8 Ordinary Cement concrete (Mix 1:2:4) with graded stone chips (20mm. down) excluding shuttering and rainforcement if any in ground floor as per relevent IS.(a) Pakur Variety. (Rate Analysis assuming 50km distance) (Payment will be based on actual distance) 9 Disinfecting of the whole distribution system with bleaching powder solution of proper consistency with supply of bleaching powder labour all complete as per direction of E.I.C.(Not exceeding four times in a year). 10 HORIZONTAL ROAD CROSSING:Horizontal road crossing by Augor-boring including boring charge, pipe laying and jointing, making baricates, lighting arrangement etc. all complete as per direction of E.I.C.: For 80 mm dia. to 200 mm dia. pipes. 11 Carrying CI/DI pipes with specials and valves and lowering placing in position and laying carefully inside the trenches in proper alignment and gradient etc. including earth work in excavation of adequate width as per specification having min. clear cover from top of pipe is 1.10mtr. below existing ground level in any kind of soil including mixed with boulder, road sub-grade and its flank,but excluding moorum and laterite and stone etc.without damaging the exisiting telephone/electric cable etc.(in case of damaged if any type of cable line during excecution , necessary damaged charges as applicable by the respective authority will be borne by the agency in his own cost) preparing the bottom surface for continuous bedding of pipe line and laying pipes, fitting, fixing specials and valves with bailing out water if any including carriage of pipes, specials and valves from local deptt. store within 8KM and back filling the trenches with excavated earth in layers to original condition as per specification and direction of EIC. The surplus materials after execution of work are to be return to the deptt. store.N.B: i) Any deviation from required clear cover of 1.10mtr., due to site adverse condition, prior permission is to be obtained from the EIC in exceptional situation and payment will be made on prorate basis over the rate of entire item.ii) No payment will be made without hydraulic test of the pipe line either part or fulliii) The pipes, specials and valves , rubber gasket will be supplied deptt. free of cost. 12 (a) 100 mm. dia. 13 (b) 125 mm. dia. 14 (c) 150 mm. dia. 15 (d) 200 mm. dia. 16 (e) 250 mm. dia. 17 (f) 300 mm. dia. 18 (g) 350 mm. dia. 19 Cutting DI pipe (all class & type) to required length with cutting device etc. and grinding the cutting portion with file as per direction and satisfaction of EIC. 20 a) 80 mm dia to 125 mm dia. 21 b) 150 mm dia to 200 mm dia. 22 c) 250 mm dia to 350 mm dia. 23 Chamfering the spigot end of all type/class of DI pipe for proper using of push joint by means of grinder set at site for proper joint etc. all complete as per direction of EIC. 24 (a) 80 mm. dia. 25 (b) 100 mm. dia. 26 (c) 125 mm. dia. 27 (d) 150 mm. dia. 28 (e) 200 mm. dia. 29 (f) 250 mm. dia. 30 (g) 300 mm. dia. 31 (h) 350 mm. dia. 32 Making flange joint to DI/CI pipes, specials and valves where necessary with supply of required rubber insertion and nut bolts, washers etc. of approved quality and type all complete as per specification and direction of EIC (Nut and bolts shall be of TATA/GKW rate). 33 (a) 80 mm. dia. 34 (b) 100 mm. dia. 35 (c) 125 mm. dia. 36 (d) 150 mm. dia. 37 (e) 200 mm. dia. 38 (f) 250 mm. dia. 39 (g) 300 mm. dia. 40 (h) 350 mm. dia. 41 Repairing of flange joint after dismantling the joints, removing the unserviceable rubber insertion and supply new rubber insertion and supply upto 50 % of new nuts and bolts all complete including necessary earth work dewatering & supply of washer etc. all complete as per direction of EIC. 42 a) 80 mm dia. to 100 mm dia. 43 b) 125 mm dia. to 200 mm dia. 44 c) 250 mm dia to 350 mm dia. 45 d) 400 mm dia to 500 mm dia. 46 Making rubber gasket joint to CI/DI pipes maintaining proper alignment level etc. by mechanical arrangement with or without using mobile cranes where necessary and with help of all other equipments tools and tackles etc. as required providing lubricants of approved quality and direction of EIC. (rubber gasket will be supplied deptt. free of cost) 47 (a) 150 mm. dia. 48 (b) 200 mm. dia. 49 (c) 250 mm. dia. 50 (d) 300 mm. dia. 51 (e) 350 mm. dia. 52 Making bolted gland collar joint to C.I. pipe as per specification and direction of E.I.C. including all materials). 53 (a) 150mm. to 250mm. dia. 54 (b) 300mm. to 450mm. dia. 55 Supply and delivery of 10 mm NB Gum-metal Ferrule conforming to IS 2692:1989 with latest amendments. 56 Laying casing pipe line excavation of trenches and refilling the same. 57 (a) 150 mm. dia. 58 (b) 200 mm. dia. 59 (c) 250 mm. dia. 60 (d) 300 mm. dia. 61 Brick work in cement mortar (1:6) in foundation and Plinth. 62 15mm. Thick plaster (6:1) with sand and cement mortar rounding off corner or chamfering corner etc. roughening concrete surface including chipping cement slurry etc. 63 Neat cement punning in wall etc. 64 Single layer brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand including cost of sand or earth. 65 Reinforcement for R.C.C. work including distribution bars, stirrups binders etc. including supplying rods of any dia. and removal of loose rust cutting requisite length hooking bending binding with 1.685mm. Plank annealed wire at every intersection complete as per direction of E.I.C. 66 Supplying and fitting, fixing of nuts & bolts as requiredduring execution as per E.I.C.(a) Nut & bolts(with washer) of TATA/GKW make with long threaded end of any diameter and length.: 10 to 25mm dia 67 Supply, fitting, fixing the following Specials as required during execution as per E.I.C. 68 G.I. Socket of TATA make: 15 mm. dia. 69 G.I.Nipple of I.S.I. brand 50 mm long:15 mm. dia. 70 Supplying, fitting, & fixing alloy iron with brassspindle Bib cock/stop cock of approved brand and make, spray painted and tested to 21 Kg per Sq.cm.: 15 mm. dia. 71 G.I. Union I.S.I. brand.: 15 mm. dia. 72 G.I. plain equal elbow of I.S.I. brand and make: 15 mm. dia. 73 Supply of G.I. pipes of TATA make including necessary sockets.: 15mm. dia. Medium quality 74 Carriage of different type of departmental pipes from Divisional/Sub-divisional store to the work site by truck including loading, unloading, stacking etc. including cost of fuel, lubricant and also cost of driver, helper etc. and all other taxes and charges as applicable as per direction of EIC 75 a) Any distance upto 5 Km 76 b) Above 5 Km upto 10 Km 77 c) Above 10 Km upto 20 Km 78 d) Above 20 Km upto 30 Km 79 e) Above 30 Km upto 40 Km 80 f) Above 40 Km upto 50 Km 81 g) Above 50 Km (Extra cost per Km) 82 Carrying charges of materials M.S. Rod, D.I. Pipe, G.I. Pipe, TW materials, C.I.Dt. Joints, A.C. Coupling, Brass Strainer, H.D.P. Strainer, A.C. Pressure Pipes, M.S. Pipes etc. by road from different stack yard to any places within West Bengal including loading (upto a lead of 20 mtr. from loading point), packing, unloading and stacking charges etc. complete as per direction 83 For distance 0 Km. to 5 Km. 84 For distance (above) 5 Km.to 10 Km. [Subject to minimum of Rs. 222.10/MT] 85 For distance (above) 10 Km.to 15 Km. [Subject to minimum of Rs. 248.70/MT] 86 For distance (above) 15 Km.to 25 Km. [Subject to minimum of Rs. 348.00/MT] 87 For distance (above) 25 Km.to 50 Km. [Subject to minimum of Rs. 496.00/MT] 88 For distance (above) 50 Km.to 100 Km. [Subject to minimum of Rs. 784.00/MT] 89 For distance (above) 100 Km.to 125 Km. [Subject to minimum of Rs. 1407.00/MT] 90 For distance (above) 125 Km.to 150 Km. [Subject to minimum of Rs. 1642.00/MT] 91 For distance (above) 150 Km.to 200 Km. [Subject to minimum of Rs. 1648.00/MT] 92 Carriage of pipe and specials from Depttl. Store including loading and unloading and stacking at store of any PWSS. ( By Van or other means ) 93 Supplying, fitting, fixing M.S. clamp including drilling holes cutting to requisite length supplying nut bolts all complete etc. by cement concrete (1:2:4) as per direction (cost of concrete will be separately).(a) 40mm.x 6mm. above 250mm. upto 350mm. length. 94 Re-fixing G.I. pipes with fittings after cleaning where necessary.: 15 mm. dia. G.I. Pipes 95 Labour for fitting, fixing G.I. pipes above ground in structures with holder bat clamps including cost of jointing materials holder bat clamps etc. as necessary including cutting pipes making threads etc. complete in all respect with two coats of painting with approved paint any height (Payment will be made on the center line measurement of the total pipe line including G.I. Specials Payment of painting will be paid separately).: 15 mm. dia. 96 Labour for fitting & fixing G.I. pipes for under ground work including cost of jointing materials, cutting pipes, making threads etc. complete in all respect including cutting trenches upto 1.5 m. below surface in all sorts of soil and refitting the same as directed with two coats of painting to G.I. pipes and specials with bituminous paint. (Payment will be made on the centerline measurement of the total pipeline including specials Payment of painting to be paid separately).: 15 mm. dia. 97 Labour for fitting & fixing high density polythene pipes or PVC pipes for above ground work including cost of jointing materials, points etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or RC floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost of fitting and fixing holder but clamps (any floor) or for under ground work including cutting trenches up to 1.5 m. and refilling the same complete as per direction of the E.I.C. (Payment will be made on center line measurement of the total pipeline including specials): 15 mm. dia. 98 Supplying, laying, fiting, fixing and jointing of UPVC pipes conforming to IS:4985-2000 with latest revision and amendments, if any, with necessary UPVC/CI specials, CIDF sluice valves, as per relevant I.S. specification including labour charges for earth work in excavation in any kind of soil including mixed soil with boulder ,road sub-grade and its flanks but excluding moorum and laterite or sand stonehard arock including cutting of brick payment without damaging the existing telephone/electrical cable line etc.(in case of damage of any type of cable line during excavation, necessary damaged charges as applicable by the respaective authority will be borne by the agency in his own cost. Loading, unloading, carrying of pipes, specials, valves from the local store to work site and lowering laying of pipes specials valves carefully in trenches maintaining proper levels and alignment ,jointing the pipe and specials including supplying of good quality/approved brand solvent cement (as per IS:14182-1994 including cost of all fabricated PVC fitting i.e.tees, bend, reducers, adopter etc.as per IS:101-1988 and making flange joints including supplying required quantity of nuts, bolts and rubber insertion (CIDF sluice valves will be supplied by the department free of cost) as required at site by adopting suitable method so as to facilate the maintenance of pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150mm thk. with maintaining an average depth of cushion of 1.10mtr. from the top of pipe line including making interconnection with distribution pipes etc. all complete as per drawing direction and satisfaction of the E.I.C. 99 N.B. i) Manufacturer’s test certificate for UPVC pipe & specials to be produced before laying of pipe line. ii) 3rd party inspection of UPVC pipe & specials to be done by CEPET (India) /SGS/NTH Kolkata or as per direction of EIC as per approved vender list.iii) No part payment at any stage on account of supply of materials shall be entertained.iv)Payment will be made on actual consumption of materials.v) UPVC pipes for the works to be supplied as per approved vendor list and as per direction & satisfaction of EIC. No pipes will be allowed beyond recommend dated vendor list. vi) Submission of drawing of pipe line with statement of materials consumed between node to node points against each R.A. & final bill. if so. vii) Any deviation from required clear cover of 1.10mtr.due to site. 100 pipe line locally as per conventional method including back filling the trenches with good earth obtained from excavation of trenches including consolidation with watering in layer not exceeding 150mm thk. with maintaining an average depth of cushion of 1.10mtr. from the top of pipe line including making interconnection with distribution pipes etc. all complete as per drawing direction and satisfaction of the E.I.C. adverse condition, prior permission is to be obtained from EIC and payment for such work will be made on prorate basis over the rate of entire item.viii) All pipe connection shall be completed in all respect and as per direction of EIC. Decision of EIC in this respect is final & binding. In case of any deviation/or any left out pipe connections an amount of Rs.10,000.00 for each pipe connection will be realized/recovered from the bill. 101 (a) 63mm O.D. Dia 102 (b) 75mm O.D. Dia 103 (c) 90mm O.D. Dia 104 (d) 110mm O.D.Dia 105 (e) 125 mm O.D.Dia 106 (f) 140mm O.D. Dia 107 (g) 160mm O.D.Dia 108 (h) 180mm O.D.Dia 109 (i) 200mm O.D. Dia 110 (j) 250 mm O.D. Dia 111 (k) 280 mm O.D. Dia 112 Labour charges for repairing the bursting/damage/leakage of 80 mm. dia, to 200 mm. dia. A.C. Pipeline with detachable joints including earth work in excavation tracing out the actual position of burst/leak, cutting pipe of required length, refitting the same with new pipes and old/new detachable joints after chiseling and shaping the pipe, bailing out water from the trenches and refilling the trenches to its original condition all complete as per direction of E.I.C. (Extra A.C. Pipes and detachable joints with rubber ring, nuts and bolls etc. will be supplied from the scheme store, Surplus and unserviceable pipes and specials will have to be returned to the same store. The rates are inclusive of carriage to site of work and back carriage of materials to and from scheme store as mentioned above.) 113 (i) 80 mm dia. to 125 mm dia. 114 (ii) 150 mm dia. to 200 mm dia. 115 Extra repairing charges for changing of gland packing of sluice valve/air valve with supplying of gland packing grease etc. bailing out of water including removing the top cover slab of vaIve chamber and refixing the same after completion of work as per direction of EIC. 116 (a) 80 mm dia. to 125 mm dia. 117 (b) 150 mm dia. to 250 mm dia. 118 (c) 300 mm dia. to 350 mm dia. 119 Making lighting arrangement for continuation of work during night including all charges. 120 Repairing of air valves by changing the ball with changing the requisite nuts and bolts and rubber insertion all complete as per direction of EIC. 121 Making barricading for protecting the trench to avoid any accident including making arrangement of rod light during the night. 122 Rectification or repairing of existing FHTC connection from C.I./D.I./PVC/HDPE /G.I./A.C. distribution pipeline with labour cost for cutting trench (1m X 0.9m X 1.2m) carefully without damaging the existing distribution pipe line, (in case of damaged if any pipe line during eexecution, necessary damaged should be repairing by the agency in his own cost) removing carefully old damage / good condition saddle piece, brass/gunmetal and refitting saddle pice and ferrul and all accessories, after connection work filling the trenches by earth all labour work are complete (Excluding all necessary Materials) as per direction of EIC. 123 Dismantling existing ferule with fitting and refixing the same after cleaning and washing of pipe line upto stand post. 124 Charges for day to day conveyance towards reporting related to operation and maintenenace of smooth water supply from the scheme including cost of tele-communication charges etc. all complete whatsover required for the purpose as per direction and satisfication of the E.I.C. 125 Supplying Bleaching Powder of approved brand (DCM/Modi/Kanoria) including all charges and free delivery at site. 126 Supplying of UPVC coupler 6Kg, class-III conforming to IS: 4985-2000 with latest revision and amendments ( This item is applicable for maintenance/repairing work pipe line only). 127 a) 63 mm dia. (OD) 128 b) 75 mm dia. (OD) 129 c) 90 mm dia. (OD) 130 d) 110 mm dia. (OD) 131 e) 140 mm dia. (OD) 132 f) 160 mm dia. (OD) 133 Cleaning silt (every month) from the over head reservoir,cleaning washing and disinfecting the same with bleaching powder, including machinery, tools and plants as per direction of EIC complete (Bleaching powder will be supplied by the agency). 134 a) Upto 1.50 lakh gallon capacity OHR. 135 b) Above 1.50 lakh gallon and upto 2.5 lakh gallon capacity OHR 136 Withdrawing and relaying of DI/CI Pipes/AC Pipe after excavation of earth and with the help of chain pulley derrick etc. by dismentling & jointing by rubber gasket joint or lead joint or flange joint and stacking the withdrawing pipes and specials at site store/road flank, godown etc. all complete in the excavated same trench & as per direction of EIC. 137 (a) 80mm. To 125mm.dia. A.C./D.I./C.I.pipe 138 (b) 150mm. To 200mm.dia. A.C./D.I./C.I.pipe 139 (c) 250mm. To 350mm. dia. A.C./D.I./C.I.pipe 140 Labour charges for repairing of UPVC pipe by using UPVC socket and solvent cement including earth work in excavation with dewatering and necessary tracing out the actual position of brusting /leakage, cutting the pipe to required length in the trenches and replacing the same with new pipe ( as per required length) including fitting, fixing after roughing the UPVC surface & supplying and applying solvent cement, back filling the trenches with excavated earth upto the same as per direction of EIC all complete (UPVC pipes and specials solvent cement to be supplied by the Agency). Unserviceable broken withdrawn surplus materials are to be deposited to the deptl. store. 141 (a) 63 mm. dia 142 (b) 75 mm. dia 143 (c) 90 mm. dia 144 (d) 110 mm. dia 145 e) 125 mm dia. 146 (f) 140 mm. dia 147 (g) 160 mm. dia 148 h) 180 mm dia. 149 (i) 200 mm. dia 150 Opening the cap/plug of washout point and opening sluice valve to clean the pipe cleaning the cap/plug and sluice valve after completion of the work including earth work in excavation and refilling the same, draining out washed water etc. as per direction of EIC and replacing RCC Top slab cover where necessary including refixing the opened cap / plug in position complete.a) Cap Opening 151 Bailing or pumping out water from foundation trenches. This item should be executed on the specific direction of the Engineer-in-charges when he is satisfied in hisn absolute discretion, that this has not been necessitated due to any fault on the part of the contractor. (Payment, if permitted, will be made on the quantity of water calculated on the basis of initial and final water calculated on the basis of initial and final water level measured before starting and completion of each days work which necessitates a bailing / pumping of water from the trench. The final level of water to be measured, will depend on the level at which the days work will be taken up. The rate includes any seepage water that may percolate in the trench during pumping) 152 Dewatering from the excavated trenches for repairing any type of pipe line including hire charges of pump/Carriage /Fuel & lubricant/Operator etc. for big dia. pipes more than 200 mm dia. all complete as per direction of EIC. This item will be executed after the permission of EIC. 153 Charges for health check up for water borne disease of the workers depuhted in mainhtenance work (including testing of blood (T.C., D.C., ESR, HB%), Urine(R/E), Stool (R/E) by a registered Medical Practioner.NB:-(i) This item to be completed within a month from date of receiving of work order and applicable for once in a year.(ii) All test report in original to be submitted within 45 days from date of receiving of work order. 154 Cleaning the chokage of AC/DI/CI/UPVC Pipes in the existing line by split bamboo passing through the new pit on the line and cleaning silt, bats or any obstructed materials in the line and cleaning by washed water (Work to be executed as per prior approval and direction of EIC) 155 Taking out of old and damaged valve of any type from the existing line after dismantling of flange joint or socket joint and fitting, fixing of new valve.(Cost of dismantling of joint and renewing the same to be added with this item to complete the job in all respect.) 156 a) 80 mm dia to 100 mm dia. 157 b) 125 mm dia to 150 mm dia. 158 c) 200 mm dia to 250 mm dia. 159 d) 300 mm to 350 mm dia. 160 Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir. 161 Cleaning and disinfecting above 2000 litre Water Tank including masonry reservoir. 162 Sundry and petty repair including periodical charges of Engine oil, Gear oil, required for Lubrication of all parts & periodical inspection and servicing by bonafide technician as required as perdivision of EIC. 163 Repairing of unserviceable spares of IRP in sluice valve, gunmetal valve etc. including supply of Nuts & Bolts & Washers, gland packing etc.; blower & Compressor petty repair work in case of immediate remedial measured to keep the maintenance work in order including hire charges of machine, the cost of replacement of any part in any of the unit of the plant spares (Elec. / Mech. / Hardware) : if for any occurrence, for replacing the Elec. / Mech. / Hardware spare the cost of which is more than Rs. 250/- (Rupees Two Hundred Fifty) only to be supported with cash memo from authorized dealer / manufacturer the extra payment would be made as per the actual cost 10% profit +2 % contingency charges towards transportation and handing it, as per direction of E.I.C. & his satisfaction.In the event of – N.B.:- Spare parts if any required for above item ,will be procured fromlocal market with supply vouchers and the vouchers should be certified by the AE concerned for authenticity. 164 (a) Normal Maintenance. 165 b) Purchase of spares above Rs.250/- only if require. 166 Scraping the outer surface of shells of IEP and all other parts of IRP with brush, charcoals and painting the outer surface with enamel painting of approved quality including inlet, outlet pipe, sluice valve, oxidation chamber etc. (onetime/year) 167 Working Amount 168 Provisional arrear payment, if labour wages gets enhanced by the competent authority for daily operation of valves & pipe line inspection/IRP maintenance (This item will be paid only on production of the paid amount to the labour by the contractor based on order. 169 Add Includng GST @18% 170 Add Includng CESS @1%

BRR:8276297 Bids Are Invited For Hiring Of Third-Party Inspection Agency - Health Facilities & Social Works, Health Insurance; Health Insurance Claims; Irda

BRR:8275517 Bids Are Invited For Event Or Seminar Or Workshop Or Exhibition Or Expo Management Service - National; Navlal Band Performance At Trivandrum As Part Of Op Demo 25; Venue Development; Third-Party Premise; Full Day

BRR:8272504 GENERAL-2361958/2025-Electrification to Park in Perumpadapu, Division 18, Kochi Municipal Corporation -General Electrical Work-- 1 SITC OF STREET LIGHT 2 90.15.1.1:Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 8 Meters 3 90.15.4.6:Supply Conveyance, installation, testing and commissioning of 70W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 4 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. 5 14.9:Providing and laying in position cement concrete 1 :3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required. 6 14.10:Providing and laying in position reinforced cement concrete 1 :2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc. including form work etc. as required (excluding reinforcement). 7 OD82352/2025-2026:Reinforcement of RCC work .bend,tied,and and placed in position (plain grill requiring bend cold) using for steel 8 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels 9 OD82348/2025-2026:Earthing with G.I. earth pipe 2 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required 10 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 11 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 12 OD82350/2025-2026:Supply and providing out door terminal box 140x140x95mm(GSJB 1414 Sintex make) 13 OD82349/2025-2026:Supply and fixing of Neutral link 32 A, 2 Way neutral links mounted on DMC/SMC base 14 OD82346/2025-2026:Supply and providing 12x3mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes 15 OD82347/2025-2026:Supply and providing 25x6mm brass bolt and nut with washers on the existing MS box/earth bus etc as required including drilling necessary holes 16 90.12.5.3:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm 17 90.12.9.2:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size 18 9.1.2:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm) 19 OD82351/2025-2026:Supply and providing earth clamp of 12mm thick suitable for 4/6/10 sq mm Cable 20 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 21 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 22 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 23 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 24 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 25 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole 26 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 27 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 28 2.3.2:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door 29 OD82378/2025-2026:Supply and fixing Time switch 240 V AC DIN/BASE mounting type and giving connection 30 OD82379/2025-2026:Supply and fixing 40A AC1 MNX 4 pole power contractor (L&T)in the existing enclosure and giving connection 31 OD82393/2025-2026:Supply and providing post top luminaire 25WIP65 protection fixing it on existing GI pole or concrete pillar with GI pipe of suitable size and length welded or concreting ,neatly painted with suitable colour enamel paint over a coat of epoxy primer and giving connection ( Havells 25W Ruby Clear Landscape Lightor Crompton CHAPLET make ) 32 OD82437/2025-2026:Supply and fixing spot light for existing name board fixing it on suitable bracket and giving connection (Havells,Cromption,Philips make) 33 OD82455/2025-2026:Supply andproviding Sintex boxof size 600x500x250mmfor fixing DB,Contactor,Timer,etccomplete (Sintex 6050or equivalent ) 34 OD82456/2025-2026:Supply and installation of dust and Vermin proof wall mounding meter box 350x250x150mm SINTEX make GSMB 3525or equilentwith base plate suitable to fixing1 phase energy meter and cut out 35 OD82517/2025-2026:Supply fabrication conveyance and installation of lamp post 63 mm dia B class GI pipe of 4 M with 12mm thick 150x150mm base plate with 4 nos foundation bolt , nut and washer fixed on RCC foundation of required quantity neatly painted with suitable colour enamel paint over a coat of epoxy primer including providing necessary bracket for fixing flood lights .For fixing LED flood lights in front of open air stage 36 OD82345/2025-2026:Fee to be remitted to KSEB as supervision charges . Amount shall be reimbursed according to the original receipt

BRR:8272294 Tender For Annual Maintenance Of Mini Mast At Kunnathukal Grama Panchayth- 1 Karakonam Hospital Junction 2 90.15.4.9Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factorgreater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 3 od166608/2024_2025Supply and fixing of Digital timer, 4 Kunnathukal Junction 5 od166608/2024_2025Supply and fixing of Digital timer, 6 90.15.4.9Supply Conveyance, installation, testing and commissioning of 150W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 7 Elluvila Junction 8 90.15.4.7Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 9 od166637/2024_2025Supply and fixing of 1 no. of 25 A 2 Pole AC 1 rated power contractor, 1 nos of Digital timer. 10 90.12.5.13Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.3 core 6 sq mm 11 Aruviyode Market Junction 12 90.15.4.7Supply Conveyance, installation, testing and commissioning of 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

BRR:8268559 Tender For Provision Of Roof Top Solar Plants 125 Kw At Certain Buildings At Mil Station Gaya; 1 Design, procure, erection, installation, testing and commissioning including connecting to local utility grid; Roof top On-grid Solar Photovoltaic Plant of 50kWp capacity including Solar Photovoltaic Modules, DC Cabling, Module Mounting Structures, Array Combining Boxes, Lightning Protection of SPV modules and other accessories, Central Inverter as Power Conditioning Unit, Weather Station and Data Monitoring System all as per detailed specifications given in Particular Specification, latest MNRE/IREDA guidelines and directions, meeting the Domestic Content Requirement (DCR), consisting of all requisite accessories (BOS-Balance of System) and incuding the following main componenets:-Make In India: Solar Panel & Solar Cell: Monocrystalline PV Modules & PV Cells : TATA / BHEL / HMV / Waaree Energies Ltd / Vikram / Adani / Emmvee / Premier Energies Solar Invertor/ Power Conditioning Unit (PCU) : DELTA / SUNGROW / GROWATT / POLYCAB / HAVELLS / FIMER.Note: 50 KWp (i.e. 50 KW AC out put) (02 Nos) solar roof top plant will be installed at Demo Coy and DSC Bldg including annualmaintenance cost 2 years till completion of defect liability period. The completion of work (Phase-I ) after installation ,testing and and commissioning of plant.During defect liability period, contractor will carry out following activity:-The scope include:(i). Cleaning once in a month. (ii). CompetentpersonsthroughAuthorizedServicecentrewillalwaysbe deputed to respond the calls who are aware of safety and statutory norms.(iii). For monthlycleaningand preventivemaintenanceactivity - team of one expert Engineer &two semi-skilled technicians will be deputed and they will submit monthly report. (iv).sensors & Data Logger once in 2 month:- (a) Sensor healthiness.(b). Optical Fibre Communication loop healthiness(c). Data logging accuracy(d). Frequency- Monthly (v). Reliability Centred Maintenance once in a month:- (a).Preventivemaintenance ofthecompleteplant-Stringhealthiness, presenceof burnmarksorlocalhotspots,Inverterchecking, checkingof healthiness of power distribution panels etc. (b). Integrity improvement (proper identification of strings and all cables)(c). Frequency-Monthlyvi. Breakdown Calls:- (a).Toberespondedwithintwohrsandresolutionwithin24to48hrsfor minor issues like string problem etc. on a working day.(b). Call log notification time will start from the time a mail has been triggered by the Solar Log system or Customer reports any abnormality(c). Visits of any OEM Engineer will be organized vendor/contractor wherever specialized input is required for addressing the breakdowns at site without any extra cost after completion of 2 years of Defect Liability Period,contractor will provide additional maintenance of the Solar Plant for further 3 years as per scope of maintenance referred above (i.e. total maintenance period 2+3 years).Note:- (Inverter capacity 25/ 50KW as applicable with 05 years warranty) 2 Sl Item 1 Contd….(A) Mono Crystaline Silicon Solar Photovolaic Modules of500 Wp or more (module power and number of modules to be selected according to available roof top area & adequate walkway), having cell efficiency more than18% under standard conditions, form fill factor more than 0.76, plant performance ratio > 75%, made of high transmitivity glass front surface and it shall give high encapsulation gain (transmittance above 90% and bending less than 0.3%). The modules shall have the folling features :-(a)The electrical parameters of SPV modules under standard test condition of irradiance 1000 W/sqm, AM 1.5 Spectrum and temp 25 degree Celsius shall be as under:-(i) Max Peak Power Pmax : 500 Wp or more(ii)Voltage at Max Power : > 39 V(iii) Current at Pmax : > 9 A(iv) Short Circuit Current : > 10 A(v)Open Circuit Voltage : > 47 V(vi) Module Efficiency : > 19 %(b) Rated output of the modules shall have positive tolerance of 3-5% and no negative tolerance is allowed.(c) It shall perform satisfactorily in RH 85% with temperature up to +85 degree C and should withstand wind of 200 kmph on the surface of panel.(d) PV modules shall be warrented for their output peak watt capacity, and it shall not fall of its initial value below 90% in first 10 year end and 80% after the end of 25 years. 3 Sl Item 1 Contd….(e) Each module shall have RFID tag encapsulated with solar cell bearing following details :- (i)Name of Manufacturer of SPV Module(ii) Name of Manufacturer of Solar Cell(iii)Month and year of Manufacturing (seperately for cell and module)(iv) Country of Origin (both cell and module)(v)Peak wattage, Im, Vm and fill factor of the module(vi) Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate.(vii)Unique serial no and model no of module(viii)IV curve of module(f)The temperature coefficient of power for the module shall not be more than 0.50% per degree Celcius.(g) Every module must have bypass diode of suitable capacity.(h) PV module must confirm to latest edition of IEC 61215/ IS 14286. In addition the modules must confirm to IEC 61730 Part I and II for construction and testing & safety qualifications and confirming to IEC 62804 PID.(j) It shall also be in confirmity to latest minimum technical specification issued by MNRE & IREDA from time to time. Modulesshould be of MNRE & IREDA approved companies and as per latest IEC/IS standards.(k)Provision of earthingand earth strip / cable etc for earth of solar PV module/ array etc as per latest IS/MNRE & IREDA norms to be provided and cost of the same is deemed to be included in the item and no extra amount will be paid to the contractor on this account. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474). 4 Sl Item 1 Contd….(l)RFID reader is to be provided by contractor(m)Both PV cells and SPV modules shall be make in India. 5 (B)Junction Boxes : Supply and fix junction boxes of suitable Nos (as per design)/ OEM recommendations inputs and suitably rated output having separate DC fuses for both (+) & (-) on input and isolator on output terminal for each string. Each junction box must have a spare input terminal. The junction boxes shall be dust and vermin proof and water proof made of FRP/ Thermo Plast with IP 65 protection in compliance with IEC 62208 and shall be UV resistant, fire retardant. It shall have surge protection and maintenance free earthing as per relecant standard. The junction box shall have suitable arrangement of the following :-(a)The strings are required to be connected to the copper bus bar through individual fuses.(b) Provide arrangement for disconnection (DC dis-connection switch) for each SJB/ SCB.(c)Provide a test point for each sub group for quick fault location and to provide group array isolation.(d)Each array box shall be of relevant IEC standard.(e) Each array junction box shall have suitable bypass & reverse blocking diodes for maximum DC blocking voltage of 1000V with suitable arrangement of its connection. Reverse blocking and bypass diodes shall work for extreme temperaturesand shall have efficiency of 99.98% confirmed by appropriate IEC standard.Make : As per OEM 6 Sl Item 1 Contd…(C)DC Cables : Suitable size of XLPE insulated tinned Copper cable (min 6 sqmm of size) of Solar grade, 1100 Volts and UV resistant for outdoor installations confirming to IEC : 60227/15694 & 60502/ IS : 1554 (Pt I&II) and shall be as under :-(a) All cables and connectors for use of installation shall be of Solar grade which can withstand harsh enviromnetal conditions including high temperature, UV radiations, rain, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/ IS.(b) All the cables / wires shall be provided with UV resistant printed ferrules for DC side.(c) The size of the cable shall be such that avearage voltage drop at full power from PV module to inverter shall be less than 1.5%.(d)Cable batch No, drum No, IS code and size and make shall be metioned on every one meter or as per OEM practice.(e) The wiring of the module interconnection shall be in UPVC/HDPE pipe of suitable size. (f) The cost of interconnecting DC Copper cable, MS cable trays, and earth work for trenches/ MS cable trays suitable to accommodate Solar grade cables from SPV module upto inverters are included in the item. 7 Sl Item 1 Contd….(D)Module Mounting Structure (MMS) : Design, procure, fixing, support structure made of hot dipped galvanised with min 85 micron thickness including necessary PCC foundation and associated work (cutting, grouting, PCC filling, dispoing waste material, etc., complete) and fixing mounting arrangement suitable for SPV modules so as it can withstand wind speed of 200 km per hour. The mounting structure is to be installed at RCC Roofs and the array structure has to be so designed that maximum load is directly on roof beams and columns. It shall also occupy minimum space without sacrificing the output of SPV panels & adequate space between the arrays shall be available for easy cleaning and maintenance. Nuts, bolts, mounting structure including module mounting structure shall have to be adequately protected from the atmosphere and weather prevailing in the area. All the fastners shall be of Stainless Steel of grade SS316. Notes : (a) Two numbers of anti theft fastners of Stainless Steel on two diagonally opposite corners of each module shall be provided. (b) The modue mounting structure shall be of fixed to provide maximum generation. (c) MMS design shall be supported with Stadpro Report vetted by Third Party (Gov Institute) and submitted for the approval of the Acepting Officer. (d) The height of Roof top MMS shall be as per latest MNRE & IREDA guidelines. 8 Sl Item 1 Contd….(E) Lightning Protection for PV Array : Design, procure and fix lighting arrestor system cofirming to IS/ IEC-62305 (Part 1 - 4) on the roofs. The air terminalshall be fixed at the top of GI elevation pole with base so as to be at least two meter above the structure to be protected. Its height above roof level shall be depend upon the level of protection and protection radii required. Notes : (a) The cost of all equipments, Copper strip upto earth test point, etc., shall be deemed to be included in this item. (b)The cost ofearthing for lightning protection (F) Power Conditioning Unit : Procure, fixing, testing and commissioning of 50 KW AC (nominal power), Solar power inverter suitable to convert DC power of Solar PV module/ array to AC for further feeding to grid confirming to IEC : 61683 for efficiency, IEC : 62109-1 or equivalent for safety and IEC : 62093 for reliability. The input DC & output AC technical specification of Inverter are as under :-.Input (DC)(a)Max Absolute DC input Voltage : 1000 Vb)Start-up DC input voltage : 360 - 500 V (Default 420V)c)Operating input DC voltage range : 300 - 950 V(d)No of independent MPPT : One(e)MPPT input DC voltage range at Pacr :480 - 800 V DC(f) Max input DC Current : 110 A(g)Maximum input short circuit current : 160 A(h)No of Protected DC inputs : 8-20 9 Sl Item 1 Contd….(G)Output AC(a)AC grid connection type :3Phase (4W + PE)(b)Nominal Power at unity PF : 50 kW(c)Max AC output power : 50 KW(d)Max AC output Apperant power : 50 KVA(e)Max AC output Current : 70 A(f) Max AC fault current : 1.25 to 2.5 times of rated current(g)Nominal Output Voltage : 415 V(h)Output voltage range : 415 V ± 20%(j) Output Frequency : 50 Hz± 3Hz(k)Power factor : > 0.995(l) Harmonic Distortion Current : < 3%(m) Efficiency : > 98%(n)Standby operation consumption : < 1.5 W 10 (p)Operating temperature upto 85 degree centigrade(q)The inverter shall have minimum IP-67 protection, ground fault monitoring, grid monitoring, protection for anti-islanding, DC reverse polarity, AC and DC short circuit current and over current, AC and DC over voltage and over temperature. (r) The inverter shall adjust voltage and frequency levels to suit the grid.(s)The inverter shall be self commulated with Pulse Width Modulation (PWM) technology and shall be capable of synchronise maximum with in one min.(t) Maximum Power Point Tracker (MPPT) confirming to IEC 62093 shall be integrated in the inverter to maximise the energy drawn from the PV array(u)Monolithic design of inverter is not permitted.(v)The inverter shall have suitble nos of protected inputs (asper design) and outgoing shall be protected by ACB/MCCB. 11 Sl Item 1 Contd….(x)The inverter should have MODBUS, PROFIBUS, ETHERNET common ports.(y) The inverter shall include appropriate self protection and self diagnostic feature to protect itself and the PV array from the damage in the event of inverter componant failure or from parameters beyond the inverters safe operating due to internal and/ or external causes. Inverter shall have protection arrangement against ground leakage faults, over voltage, (SPD) & over current. Inverter shall have arrangement for adjustment for adjusting DC input current and shall trip against sustainable fault down stream and shall not restart till fault is rectified.(z)The inverter should have provisions of Galvanic isolation, anti-islanding protection (IEEE 1547/UL 1741) equivant IS and lightening.(aa) PCU must have the feature to work in tandem with other similar PCUs and be able to be successively switched ON and OFF automatically based on solar radiation variations during the day. 12 Sl Item 1 Contd…. (H) Balance of System (BOS) Items/ Components :- The BOS items/components of the SPV power plants/ systems deployed under this project shall conform to the latest edition with certificate of IEC or equivalent BIS Standards/ MNRE specifications/ as specified in Para 1.01 of Minimal Technical Requirements/ Standards for SPV System/ Plants to be deployed during this financial year under the programmes of MNRE available on MNRE website as on last date of quoting of tender.Notes : (a)The contractor must visit the site before quoting the rates for this item to asses the site condition so as to decide up on location and layout of SPV, placement of inverter, length of DC cables, lightning arresters, etc., complete.(b) The contractor shall submit complete scheme including electrical diagram of the work, schematic diagram, SPV module layout, placement of LAs, Civil work,etc., complete as per IREDA latest guidelines as applicable, Relevant IEC/IS norms to the GE for approval with in one month of date of commencement of the work. 13 Sl Item 1 Contd…. (c) The rate quoted is deemed to be inclusive of the all protection system including surge, lightning arresters and necessary earthing all as specified and directedd) Quoted rates inclusive of necessary faciility for monitoring of solar power generation through app along with necessary sim card and recharge for 2 years(e)Training : On successful commissioning of the plant, training shall be provided on plant operation and maintenance to a team (Engineers and technicians/ operators) as nominated by department for minimum one month. 14 (J) Operation and Maintenance for preventive maintenanceof 50 kwp x 2 plants (Demo ii coy & 5 DSC pln) Roof top solar plant for a period Year of 3 years after 2 year Defect liability periodfrom project completion date:The scope include:i. Cleaning once in a month. (ii). CompetentpersonsthroughAuthorizedServicecentrewillalwaysbe deputed to respond the calls who are aware of safety and statutory norms.(iii). For monthlycleaningand preventivemaintenanceactivity (one expert engineer and two semi-skilled technicians will be deputed and they will submit monthly report.(iv). sensors & Data Logger once in 2 month a.Sensor healthinessb. Optical Fibre Communication loop healthinessc. Data logging accuracyd. Frequency- Monthlyv. Reliability Centred Maintenance once in a montha.Preventivemaintenance ofthecompleteplant-Stringhealthiness, presenceof burnmarksorlocalhotspots,Inverterchecking, checkingof healthiness of power distribution panels etc.b. Integrity improvement (proper identification of strings and all cables)c. Frequency-Monthlyvi. Breakdown Callsa.Toberespondedwithintwohrsandresolutionwithin24to48hrsfor minor issues like string problem etc. on a working day.b. Call log notification time will start from the time a mail has been triggered by the Solar Log system or Customer reports any abnormality c. Visits of any OEM Engineer will be organized vendor/contractor wherever specialized input is required for addressing the breakdowns at site (without any extra cost).vii. Rate to be included for( 02+03) years Operation andMaintenance.viii.Retain 5% of amount quoted against this item till Total 02+03=05 yearsafter completion of date .However this amount could be released after submission of FDR/BGB in favour of concerned GE.Note:- For items : Solar cell and Solar Panel shall be Make In India.- The output specified will be AC output of Solar Power Plant.-The system/ RMU/ Busbar will be compatible with infrastructure of State Electricity Board.-MNRE/NSRE approved vendor will vet the design, supervise execution and will commission Solar Plant Work and will also certify the design output (agreement between authorised vendor and contractor to be submitted).-Necessary compatibility certificate of healthiness of Solar Power Plant infrastructure with State Electricity Board infrastracture shall be submitted by representative of State Electricity Board through the contractors.- During defect liability period one expert engineer and two semi skilled techicians will also monthly visit to provide service and shall submit monthly report to Engineer-in-charge.- The Contractor isrequiredto quotedthierRatefor Operation and Maintenance of Total 02+03=05 years andNo extraamount shall be paid on this acount. 15 Design, procure, erection, installation, testing and commissioning including connecting to local utility grid; Roof top on car parking structure, On-grid Solar Photovoltaic Plant of 25 kWp capacity including Solar Photovoltaic Modules, DC Cabling, Module Mounting Structure, Array Combining Boxes, Lightning Protection of SPV modules and other accessories, Central Inverter as Power Conditioning Unit, Weather Station and Data Monitoring System all as per detailed specifications given in Particular Specification, latest MNRE/IREDA guidelines and directions, meeting the Domestic Content Requirement (DCR), consisting of all requisite accessories (BOS-Balance of System) and incuding the following main componenets:-Make : (MAKE IN INDIA)Monocrystalline PV Modules & PV Cells : TATA / BHEL / HMV / Waaree Energies Ltd / Vikram / Adani / Emmvee / Premier EnergiesSolar Invertor/ Power Conditioning Unit (PCU) : DELTA / SUNGROW / GROWATT / POLYCAB / HAVELLS / FIMERNote:including annualmaintenance cost 2 years till completion of defect liability period. The completion ofmain work after installation ,testing and and commissioning of plant.(25KW AC O/P)Note:- (Inverter capacity 25/ 50KW as applicable with 05 years warranty) 16 Sl Item 1 Contd….(A) Mono Crystaline Silicon Solar Photovolaic Modules of500 Wp or more (module power and number of modules to be selected according to available roof top area & adequate walkway), having cell efficiency more than18% under standard conditions, form fill factor more than 0.76, plant performance ratio > 75%, made of high transmitivity glass front surface and it shall give high encapsulation gain (transmittance above 90% and bending less than 0.3%). The modules shall have the folling features :-(a)The electrical parameters of SPV modules under standard test condition of irradiance 1000 W/sqm, AM 1.5 Spectrum and temp 25 degree Celsius shall be as under:-(i) Max Peak Power Pmax : 500 Wp or more(ii)Voltage at Max Power : > 39 V(iii) Current at Pmax : > 9 A(iv) Short Circuit Current : > 10 A(v)Open Circuit Voltage : > 47 V(vi) Module Efficiency : > 19 %(b) Rated output of the modules shall have positive tolerance of 3-5% and no negative tolerance is allowed.(c) It shall perform satisfactorily in RH 85% with temperature up to +85 degree C and should withstand wind of 200 kmph on the surface of panel.(d) PV modules shall be warrented for their output peak watt capacity, and it shall not fall of its initial value below 90% in first 10 year end and 80% after the end of 25 years. 17 Sl Item 2 Contd….(e) Each module shall have RFID tag encapsulated with solar cell bearing following details :- (i)Name of Manufacturer of SPV Module(ii) Name of Manufacturer of Solar Cell(iii)Month and year of Manufacturing (seperately for cell and module)(iv) Country of Origin (both cell and module)(v)Peak wattage, Im, Vm and fill factor of the module(vi) Date of year of obtaining IEC PV module qualification certificate including the test lab issuing IEC certificate.(vii)Unique serial no and model no of module(viii)IV curve of module(f)The temperature coefficient of power for the module shall not be more than 0.50% per degree Celcius.(g) Every module must have bypass diode of suitable capacity.(h) PV module must confirm to latest edition of IEC 61215/ IS 14286. In addition the modules must confirm to IEC 61730 Part I and II for construction and testing & safety qualifications and confirming to IEC 62804 PID.(j) It shall also be in confirmity to latest minimum technical specification issued by MNRE & IREDA from time to time. Modulesshould be of MNRE & IREDA approved companies and as per latest IEC/IS standards.(k)Provision of earthingand earth strip / cable etc for earth of solar PV module/ array etc as per latest IS/MNRE & IREDA norms to be provided and cost of the same is deemed to be included in the item and no extra amount will be paid to the contractor on this account. (The earthing shall be of copper earth plate and having specification as per SSR Item Sr 19474). 18 Sl Item 2 Contd….(l)RFID reader is to be provided by contractor(m)Both PV cells and SPV modules shall be make in India.(n) The minimum Net Annual Generation shall be 1,460 units per Kilo Watts. 19 (B)Junction Boxes : Supply and fix jucntion boxes of suitable Nos (as per design)/ OEM recommendations inputs and suitably rated output having separate DC fuses for both (+) & (-) on input and isolator on output terminal for each string. Each junction box must have a spare input terminal. The junction boxes shall be dust and vermin proof and water proof made of FRP/ Thermo Plast with IP 65 protection in compliance with IEC 62208 and shall be UV resistant, fire retardant. It shall have surge protection and maintenance free earthing as per relecant standard. The junction box shall have suitable arrangement of the following :-(a)The strings are required to be connected to the copper bus bar through individual fuses.(b) Provide arrangement for disconnection (DC dis-connection switch) for each SJB/ SCB.(c)Provide a test point for each sub group for quick fault location and to provide group array isolation.(d)Each array box shall be of relevant IEC standard.(e) Each array junction box shall have suitable bypass & reverse blocking diodes for maximum DC blocking voltage of 1000V with suitable arrangement of its connection. Reverse blocking and bypass diodes shall work for extreme temperaturesand shall have efficiency of 99.98% confirmed by appropriate IEC standard.Make : As per OEM 20 Sl Item 1 Contd…(C)DC Cables : Suitable size of XLPE insulated tinned Copper cable (min 6 sqmm of size) of Solar grade, 1100 Volts and UV resistant for outdoor installations confirming to IEC : 60227/15694 & 60502/ IS : 1554 (Pt I&II) and shall be as under :-(a) All cables and connectors for use of installation shall be of Solar grade which can withstand harsh enviromnetal conditions including high temperature, UV radiations, rain, dirt, burial and attack by moss and microbes for 25 years and voltage as per latest IEC/ IS.(b) All the cables / wires shall be provided with UV resistant printed ferrules for DC side.(c) The size of the cable shall be such that avearage voltage drop at full power from PV module to inverter shall be less than 1.5%.(d)Cable batch No, drum No, IS code and size and make shall be metioned on every one meter or as per OEM practice.(e) The wiring of the module interconnection shall be in UPVC/HDPE pipe of suitable size. (f) The cost of interconnecting DC Copper cable, MS cable trays, and earth work for trenches/ MS cable trays suitable to accommodate Solar grade cables from SPV module upto inverters are included in the item. 21 Sl Item 1 Contd….(D)Module Mounting Structure (MMS) : Design, procure, fixing, support structure made of hot dipped galvanised with min 85 micron thickness including necessary welding and associated work (cutting, grouting, PCC filling, dispoing waste material, etc., complete) and fixing mounting arrangement suitable for SPV modules so as it can withstand wind speed of 200 km per hour. The mounting structure is to be installed at MS car parking structure and the array structure has to be so designed that maximum load is directly on main supporting structure of car parking coumns. It shall also occupy minimum space without sacrificing the output of SPV panels & adequate space between the arrays shall be available for easy cleaning and maintenance. Nuts, bolts, mounting structure including module mounting structure shall have to be adequately protected from the atmosphere and weather prevailing in the area. All the fastners shall be of Stainless Steel of grade SS316. Notes : (a) Two numbers of anti theft fastners of Stainless Steel on two diagonally opposite corners of each module shall be provided. (b) The modue mounting structure shall be of fixed to provide maximum generation. (c) MMS design shall be supported with Stadpro Report vetted by Third Party (Gov Institute) and submitted for the approval of the Acepting Officer. (d) The height of Roof top MMS shall be as per latest MNRE & IREDA guidelines. 22 Sl Item 2 Contd….(E) Lightning Protection for PV Array : Design, procure and fix lighting arrestor system cofirming to IS/ IEC-62305 (Part 1 - 4) on the car parking roofs. The air terminalshall be fixed at the top of GI elevation pole with base so as to be at least two meter above the structure to be protected. Its height above roof level shall be depend upon the level of protection and protection radii required. Notes : (a) The cost of all equipments, Copper strip upto earth test point, etc., shall be deemed to be included in this item. (b)The cost of sufficient earthing for lightning protection is also included in this item and no extra payement will be made to the contractor on this account.(F) Power Conditioning Unit : Procure, fixing, testing and commissioning of 25 KW AC (nominal power), Solar power inverter suitable to convert DC power of Solar PV module/ array to AC for further feeding to grid confirming to IEC : 61683 for efficiency, IEC : 62109-1 or equivalent for safety and IEC : 62093 for reliability. The input DC & output AC technical specification of Inverter are as under :-.Input (DC)(a)Max Absolute DC input Voltage : 1000 Vb)Start-up DC input voltage : 360 - 500 V (Default 420V)c)Operating input DC voltage range : 300 - 950 V(d)No of independent MPPT : One(e)MPPT input DC voltage range at Pacr :480 - 800 V DC(f) Max input DC Current : 110 A(g)Maximum input short circuit current : 160 A(h)No of Protected DC inputs : 8-20 23 Sl Item 2 Contd….(G) Output AC(a)AC grid connection type :3Phase (4W + PE)(b)Nominal Power at unity PF : 25 kW(c)Max AC output power : 25 KW(d)Max AC output Apperant power : 25 KVA(e)Max AC output Current : 44 A(f) Max AC fault current : 1.25 to 2.5 times of rated current(g)Nominal Output Voltage : 415 V(h)Output voltage range : 415 V ± 20%(j) Output Frequency : 50 Hz± 3Hz(k)Power factor : > 0.995(l) Harmonic Distortion Current : < 3%(m) Efficiency : > 98%(n)Standby operation consumption : < 1.5 W 24 (p)Operating temperature upto 85 degree centigrade(q)The inverter shall have minimum IP-67 protection, ground fault monitoring, grid monitoring, protection for anti-islanding, DC reverse polarity, AC and DC short circuit current and over current, AC and DC over voltage and over temperature. (r) The inverter shall adjust voltage and frequency levels to suit the grid.(s)The inverter shall be self commulated with Pulse Width Modulation (PWM) technology and shall be capable of synchronise maximum with in one min.(t) Maximum Power Point Tracker (MPPT) confirming to IEC 62093 shall be integrated in the inverter to maximise the energy drawn from the PV array(u)Monolithic design of inverter is not permitted.(v)The inverter shall have suitble nos of protected inputs (asper design) and outgoing shall be protected by ACB/MCCB. 25 Sl Item 2 Contd….(x)The inverter should have MODBUS, PROFIBUS, ETHERNET common ports.(y) The inverter shall include appropriate self protection and self diagnostic feature to protect itself and the PV array from the damage in the event of inverter componant failure or from parameters beyond the inverters safe operating due to internal and/ or external causes. Inverter shall have protection arrangement against ground leakage faults, over voltage, (SPD) & over current. Inverter shall have arrangement for adjustment for adjusting DC input current and shall trip against sustainable fault down stream and shall not restart till fault is rectified.(z)The inverter should have provisions of Galvanic isolation, anti-islanding protection (IEEE 1547/UL 1741) equivant IS and lightening.(aa) PCU must have the feature to work in tandem with other similar PCUs and be able to be successively switched ON and OFF automatically based on solar radiation variations during the day. 26 Sl Item 2 Contd…. (H) Balance of System (BOS) Items/ Components :- The BOS items/components of the SPV power plants/ systems deployed under this project shall conform to the latest edition with certificate of IEC or equivalent BIS Standards/ MNRE specifications/ as specified in Para 1.01 of Minimal Technical Requirements/ Standards for SPV System/ Plants to be deployed during this financial year under the programmes of MNRE available on MNRE website as on last date of quoting of tender.Notes : (a)The contractor must visit the site before quoting the rates for this item to asses the site condition so as to decide up on location and layout of SPV, placement of inverter, length of DC cables, lightning arresters, etc., complete.(b) The contractor shall submit complete scheme including electrical diagram of the work, schematic diagram, SPV module layout, placement of LAs, Civil work,etc., complete as per IREDA latest guidelines as applicable, Relevant IEC/IS norms to the GE for approval with in one month of date of commencement of the work. 27 Sl Item 2 Contd…. (c) The rate quoted is deemed to be inclusive of the all protection system including surge, lightning arresters and necessary earthing all as specified and directedd) Quoted rates inclusive of necessary faciility for monitoring of solar power generation through app along with necessary sim card and recharge for 2 years(e)Training : On successful commissioning of the plant, training shall be provided on plant operation and maintenance to a team (Engineers and technicians/ operators) as nominated by department for minimum one month. 28 (J) Operation and Maintenance for preventive maintenanceof 25 kwp plants (Demo ii coy & 5 DSC pln) Roof top solar plant for a period Year of 3 years after 2 year Defect liability periodfrom project completion date:The scope include:i. Cleaning once in a month. (ii). CompetentpersonsthroughAuthorizedServicecentrewillalwaysbe deputed to respond the calls who are aware of safety and statutory norms.(iii). For monthlycleaningand preventivemaintenanceactivity (one expert engineer and two semi-skilled technicians will be deputed and they will submit monthly report.(iv). sensors & Data Logger once in 2 month a.Sensor healthinessb. Optical Fibre Communication loop healthinessc. Data logging accuracyd. Frequency- Monthlyv. Reliability Centred Maintenance once in a montha.Preventivemaintenance ofthecompleteplant-Stringhealthiness, presenceof burnmarksorlocalhotspots,Inverterchecking, checkingof healthiness of power distribution panels etc.b. Integrity improvement (proper identification of strings and all cables)c. Frequency-Monthlyvi. Breakdown Callsa.Toberespondedwithintwohrsandresolutionwithin24to48hrsfor minor issues like string problem etc. on a working day.b. Call log notification time will start from the time a mail has been triggered by the Solar Log system or Customer reports any abnormality c. Visits of any OEM Engineer will be organized vendor/contractor wherever specialized input is required for addressing the breakdowns at site (without any extra cost).vii. Rate to be included for( 02+03) years Operation andMaintenance.viii.Retain 5% of amount quoted against this item till Total 02+03=05 yearsafter completion of date .However this amount could be released after submission of FDR/BGB in favour of concerned GE.Note:- For items : Solar cell and Solar Panel shall be Make In India.- The output specified will be AC output of Solar Power Plant.-The system/ RMU/ Busbar will be compatible with infrastructure of State Electricity Board.-MNRE/NSRE approved vendor will vet the design, supervise execution and will commission Solar Plant Work and will also certify the design output (agreement between authorised vendor and contractor to be submitted).-Necessary compatibility certificate of healthiness of Solar Power Plant infrastructure with State Electricity Board infrastracture shall be submitted by representative of State Electricity Board through the contractors.- During defect liability period one expert engineer and two semi skilled techicians will also monthly visit to provide service and shall submit monthly report to Engineer-in-charge.- The Contractor isrequiredto quotedthierRatefor Operation and Maintenance of Total 02+03=05 years andNo extraamount shall be paid on this acount. 29 Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size95 Sqmm x 3.5 Core. 30 Supply and lay cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size70 Sqmm x 3.5 Core. 31 M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. 32 Supply and fix microprocessor based three phase electronic temper proof solar net meter CT operated, energy meter for net metering LT supply and grid solar with communication port, accuracy class 0.5, 3 phase, 240 Volts 100/5 A confirming to IS:13779. 33 Supply, fixing & laying GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittingsfor laid in trenches/ wall/ceiling/ floor/ all as specified and directed of25 mm bore GI pipe size 34 Supply, fixing & laying GI tubing medium grade with one socket both end threaded in any length including cutting threading connection in new or old position and all type of GI new fittingsfor laid in trenches/ wall/ceiling/ floor/ all as specified and directed of 20 mm bore GI pipe size 35 S & F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedingfor 20mm bore size 36 S & F Gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedingfor 25 mm bore size 37 M&L for Rotational polyethylene water storage tank of capcacity 1000 Ltrs (cylindrical vertical top) hoisted and fixed on round base of PCC1:2:4 in position all as specified 38 Supply installation of ball brass valve high pressure with polyethen float and planet complete screwed for for GI pipe 20 MM . 39 Supply install testing and commissioning offix pressure pump up to 1 H.P 40 Supply and fix installation testingPVC hose pipe type-1, 25 mm dia, 30 mtr long for cleaning of panels with spray Jet . 41 M&L for tapping/ cutting from GI/DI pipe any diameter including suitable size tee/fitting for 25 mm dia GI pipe complete all as specified. 42 M & L for sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etcone run of PVC insulated with 6.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit. 43 S & F sheet metal enclosure MCB DB SPN 2 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. 44 S & F for MCB Single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, C curve complete all as specified and as directed. 45 M&L for mild steel framed work such as grills,gratingsetc with endsof bars shoulderedand or riveted,or forged into spikes,framed guard bars,barred iron doors ,ladders,walkwaysand similarworks conforming to fe290,gde E-165 ( iron ladder for 3 buildings) 46 Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft /loose soil complete all as specified and as directed for laying of under ground cable/pipe etc. complete all as specified and as directed 47 Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc 25 cm thick in soft/loose soil,complete,all as specified and directed. 48 Removing surplus excavated material to a distance not exc 50 meter and depositing where directed at level not exc 1.5m above the starting point,complete,all as specified and directed. 49 Material and labour for providing sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed. 50 Supplying & laying burnt clay bricks, sub class B, designation 75,old size laid in trenches over cable protection complete all as specified and directed. 51 S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S. 1161-1998

BRR:8268343 Tender For Construction Of Bituminous Road From Silhari Mod To Ratanpurunder Csr.; 1 Dismantling the existing black top bituminous road upto WBM depth /soling depth including stacking of serviceable material, filling of this serviceable materials in the pot holes or disposal of this serviceable material andunserviceable material upto 15 km lead including compacting the dismantled material by suitable roller, compactor to reduce its volume at the site of disposal as required all completeas per direction of Engineer-in-charge. 2 Earth work in excavation, disposal of earth, filling around foundation, plinth, other purposes asper following itemsincluding taking levels by bringing total station, DGPS leveling machine making grid pillar etc. as per requirement and direction of EIC all complete Note-1) Contractor has to arrange for environmental clearance, all other statutory clearance such as excavation /mining/fillingas may be required from all concerned government agencies before start of excavation/fillingwork including payment of all charges, royalties etc. Any penalty arising on account of non compliance of government regulations shall be the responsibility of the contractor. 3 Earth work in excavation, taking out of excavated earth etc for foundation, drainsub gradeetc.in steps as per siteupto required depth, includingproviding required camber in soil for sub grade as required including shoring, shuttering and dewatering as required,side protection, and stacking on the sides of the existing road and disposing surplus earth to any other location within a distance of 15 km. 4 Note:- 1) Contractor has to carry out survey and leveling using total station , DGPSand prepare and submit plan , longitudinal and cross section profile (at every 10 mtr. center to center and 2 mtr. in transverse direction) in hard copy and in AUTO-CAD formatalong the entire length before starting any excavation/filling and then after completion of excavation/fillingand comparison of before and after curves in autocad for volumetric calculation ,including establishing of benchmarks at various points.2) Cleaning, grubbing, surface dressing of excavated area is deemed to be included in the cost of excavation. No separate payment will be made for cleaning, grubbing, surface dressing of excavated area. 3) For excavation work of drain Contractor has to make arrangement for diversion of flow of drain by making temporary bund / drain at his own cost including mobilizing and making use of tanker, pump, pipe etc. as requiredfor sucking the waste water and disposal upto lead of 15 km. No extra payment will be made for this. 5 Filling of excavated earth (Excavated as per item no. 2.1)for foundation, drainplinth, other purposes (except for use as per item no. 3.2)in layers not exceeding 150 mm in thickness watering and consolidation by rammer, suitable compaction equipment etc. disposing surplus earth as per directed by Engineer-In-Charge to a lead upto 15 km. Note- Payment will be on the basis of compacted volume of earth at site. 6 Fillingand construction of sub grade/ embankment/shoulders/any otherfilling as per site requirementfor road construction as per below with material obtained / supplied by contractor as per below (with approved material/selected soil having CBR>6 for subgrade / embankment/any other filling as per site requirement) obtained from borrow pitsor any other approved source with all lifts and leads ,transporting to site ,cleaning and grubbing of area to be filled , surface dressing ,spreading , grading to required slopes, camber , watering, rolling and compacting by required Power / vibratory roller etc. as required, including dewatering at required low-lying areas all complete as per specifications and filling materials obtained as follows: 7 Note- 1) Contractor has to submit test reportof filling materials complying to parameters as mentioned above testedin NABL and NPCIL approved 3rd party labs at his own cost, prior to start of filling.2) Contractor has to carry out survey and leveling using total station, DGPSand prepare and submit longitudinal and cross section(at every 10 mtr. center to center and 2 mtr. spacing in transverse direction) profile in hard copy and in AUTO-CAD formatalong the entire length before starting any fillingand then after completion of filling and and comparison of before and after curves and road profile as per drawingin auto cad formatfor volumetric calculation including establishing of benchmarks at various points. 3) Contractor has to arrange for environmental clearance , all other statutory clearance from all concerned government agencies before start of filling work including payment of all charges , royalties etc. Any penalty arising on account of non compliance of government regulations shall be the responsibility of the contractor. 4) Payment will be on the basis of compacted volume at site complying to specifications 8 5) Contractor has to submit report ofNABLapproved 3rd party testing of compacted sub grade / embankment / shoulder / any other filling including determination of OMC and MDD by NABL approved lab and submission of reportfor compliance to field density and CBR value and requirements of table 300-1 and 300-2as per MORTH specification attached herewithbefore clearance is given for laying of GSB.Compacted Field density (as per IS 2720)and CBR shall be checked @ of 1 sample (comprising of 3 trials/specimen) (bysand replacement method for density and for CBR ) at every 1500 square mtr. and every second layer of filling (i.e. every 400 mm depth) . Only when required compliance is achieved for all the 3 samples, the 1500 sq. mtr shall be considered compacted for payment and further clearance of work. In case only one layer of filling is required ,then the same needs to be got verified by the contractor through NABL approved lab 6)Cleaning, grubbing, surface dressing ofarea to be filledis deemed to be included in the cost of filling work. No separate payment will be made for cleaning, grubbing, surface dressing of area to be filled. 9 Filling materials in layers of 200mm obtained / supplied by contractor from borrow area or any other approved source(except excavated from site) complying to above specifications, rolling, watering and compacting as mentioned above all complete.Note- Payment will be on the basis of compacted volume of earth at site. 10 Filling materials in layers of 200mm obtained and shifted by contractor from excavated materials obtained from item no. 2.1 of SOQR complying to above specifications, rolling , wateringand compacting as mentioned above.Note- Payment will be on the basis of compacted volume of earth at site. 11 Supplying and laying Bricks masonry using locally available approved brick (minimum compressive strength 70Kg/Sqcm) of uniform shape {average size- 225mm x 105mm x 65mm (± 5mm)} cement mortar 1-6 (Mix ratio of -One part Cement and Six part Sand)at all elevation including, simultaneous pointing below plinth level and racking out joints above ground level, curing etc. complete as per specifications. 12 Providing, Laying and Casting Plain Cement Concrete (PCC) of M10 grademinimum cement 220Kg/ CuMincluding all Formwork,Placing, Compacting by using suitable means such as surface vibrators, needle vibratorsetc.Curing by hessian , curing compound etc . and Finishingthe entire exposed surface all complteas per as perspecifications. Note: Contractor has to ensure availability of total station leveling machine with operator for verification of levelduring the work ofPCC of drain at his own cost. 13 Providing 15 mm thick cement plaster in cement mortar 1-4 (Mix ratio of -One part Cement and Four part Sand) to brick or concrete surface etc. including preparation of surface hacking, removing of loose materials, cleaning of joints, finishing curing complete all as per direction of EIC. including disposal of rubbish. 14 Supplying & Laying 80mm thick (± 3 mm) cement concreteinterlocking paver block of M-40 grade as per technical specification (minimum compressive strength as per M-40 grade& water absorbtion should not be more than 6% by mass) having smooth finish and of approved size and design/ shape laid in required colour and pattern over brick soling by providing 50mm thick compacted bed of Ganga Sand / Natural Sand / Other approved sand and filling the joints with same all complete as per the direction of Engineer - in - charge. Note- The manufacturer interlocking tiles should meet technical specifications requirements.Concrete testing lab facility is also required in manufacturersfactory. Each tile should be trade mark of manufacturer. 15 Supplying reinforcement steel bars as per IS-1786 of TATA, SAIL , VIZAG/RINL, JINDAL make , transporting and placing in positionfor all concrete including bending, cutting, binding fabricating, fixing, tying in position with 16 gauge wire soft draw binding wire with chairs, supports etc. complete as per specification including cost of binding wire as per specification. (Binding wire will not be measured for payment).Note:Tie rods, chairs , supports etc . will be considered for payment in this item. 16 Supplying structural steel flat, angle ,pipes, all sections etc. and fabrication with cutting, welding and fixing in position of all type structural steel as per direction of engineer including painting with two coat ofS.E. paint of make Berger Luxol / Asian apoclite / Nerolac - kansaiNerolac over one coat of red oxide primer for misc. structural steel fabrication work etc. complete. 17 Providing and fixing Black granite stone 18mm thick (Approx.) ofrequired size for Inauguration board with writing Golden colour letters 1 to 2 in height 75 Nos. (Approx.), maximum 1 Golden border all around complete as per requirement at various locations.Writing matter will be provided by NAPS. (Note- Brick pedestal for fixing Inauguration board will be made separately and paid in relevant items). 18 Construction of granular sub-base (GSB) by providing close graded Material ofrequired Grade conforming to table 400-1 and 400-2 of MORTH specifications, mixing in a mechanical mix plant at required moisture content determined as per clause 401 of MORTH specification , carriage of mixed materialto work site, for all leads & lifts, spreading in uniform layers of specified thicknessand compacting with vibratory roller or power roller in places of bituminous road construction and other locations where space permits use of such rollers and vibratory compactors at other locations where space for operating the rollers is not feasible as requiredto achieve the desired density, complete as per following: Note-1) Contractor has to submit test reportofmaterials complying to parameters as mentionedabovetestedin NABLapproved 3rd party labs at his own cost, prior to start of GSB laying. 2)Compacted Field density (as per IS 2720)shall be checked (sand replacement ) in the field. Contractor has to make arrangement for the same. 19 With material conforming to Grade- I /II of MORTH specification having CBR Value-30 as per above by spreading the material with motor grader/paver in layers as per drawing on prepared surface and compacting with vibratory power roller etc. as required to achieve the desired density, complete as per clause 401 of attached MORTH specifications and directions of Engineer-in-Charge, all complete as per site requirement. Note-1) Compacted Field density (as per IS 2720) of GSB @ of 1 sample per layer (comprising of 3 trials/specimen)(bysand replacement) at every 1500 square mtr. Only when required compliance is achieved, the 1500 Sq. mtr. shall be considered compacted for payment and further clearance of work. Contractor has to arrange the equipment himself for the field testing of the same. 20 Providing and laying non-pressure 150mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 21 Supplying and laying Reinforced / unreinforced cement concrete grade M-25 machine batched and machine mixed with arrangement for conveying of concrete etc. M-25 grade concrete shall comprise of graded stone aggregate of 20 mm maximum size for different worksof RCC walls, slab, cover etc. including mixing,conveying using suitable means, consolidation, finishing, application of vibrator providing of cover block and curing casting of precast covers, keeping the precast covers in position, providing EP in concreteetc. as per drawings issue all complete.(Minimum cement content is 360 Kg/M3)as mentioned in Technical Specification. The design mix shall be obtained from approved NABL concrete testing lab as per IS:10262 and submitted to EIC before start of work. Admixture to be addedshall be complying to IS:9103. Note- 1) Steel reinforcement will be paid separately in relevant items. 2) Contractor has to submit NABL approved 3rd party report of cubes tested at 7 days and 28 days in timely manner, 30% payment for concrete shall be withheld and will be released only after submission of test reports indicating compliance to grade of concrete. Sampling frequency will as stipulated in technical specification. 3) It shall be ensured that while conveying concrete , segregation does not occur and height of free fall of concrete shall not be more than as allowed by IS 456. 4) Contractor has to ensure availability of total station leveling machine with operator for verification of levelduring the work ofconcreting of drain at his own cost. 22 Dismantling/breaking of existing plain cement concrete / brick work/WBM/any stone layercleaning of bricks etc. including removal of drain cover, stacking serviceable material and disposal of rubbishfor a lead of 15km. as directed by engineer. 23 Providing and laying Wet Mix base course Macadam (WMM) (as per MORTH specification attached in technical specification) in 2 layers using machine crushed chips as per required gradation premixed with required optimum quantity of water conveying the mix to site and spreading to grade and camber with mechanical grader/paver consolidated by vibratory road roller of 80 to 100 KN capacity or other roller as per specification to achieve density as per MORTH specification attached all completeincluding material, labour, plant and machinery and equipments etc. complete and as directed by Engineer in charge. Note-1) Compacted Field density (as per IS 2720) of WMM @ of 1 sample per layer (comprising of 3 trials/specimen)(bysand replacement) at every 1500 square mtr. shall be checked. Only when required compliance is achieved, the 1500 Sq. mtr. shall be considered compacted for payment and further clearance of work. Contractor has to arrange the equipment himself for the field testing of the same. 2) Contractor has to submit mix design of WMM from reputed Government university or private lab having NABL accreditation including determination of OMC etc. all complete. 24 Providing and applying primer coat using bituminous emulsion of grade SS-1 (Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol ) (as per IS :8887) over prepared surface of WMM with a temperature between 20 - 60 deg. C and applying a uniform coat with the aid of self propelled bitumen pressure spraying bar with nozzles of constant volume of pressure system @10 Kg/10 Sqm including all materials, labour, machinery with all leads and lifts etc. complete (as per MORTH specification attached in technical specification) as directed by Engineer in charge. 25 Providing and applying Tack Coat just before placing DBM/BC over the dry and cleaned/prepared road surface using hot straight run bitumen of grade VG-10 Grade conforming to IS: 73from(Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol) including heating the bitumen to specified temperature and liberally spraying with mechanically operated spray unit fitted on bitumen boiler @ 0.30 Kg/Sqm. of surface all in lineas per MORTH specificationattached with technical specification and as per direction of Engineer & technical specification. 26 Providing & layingDense Bituminous Macadam (Consolidated) in layers of 50-100mm using bitumen of paving grade VG-30 (Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol ) as per IS-73-2006,with aggregate as per MORTH specification, @ 45.00kg / M.T. i.e. 4.50 % of total mix, heating the aggregate and asphalt inhot mix plant and spreading the same by paver finisher and consolidation with vibratory roller, tandem roller, smooth wheeled roller, all complete as per MORTH specification attached in technical specification including rolling by pneumatic tyre roller of 12 -15 tonne weightand providing all material equipment, tools and plants, fire wood oil, kerosene, labour charges etc. complete using machinery hot mix plant, paver finisher etc. complete as directed by Engineer in charge. Note: (1) Design of mix to be obtained reputed Government university or private lab having NABL accreditation (2) Weight of each truck will be taken at IIIrd party weighing machine at contractors cost. 27 Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site, laying with paver finisherto the required grade, level and alignment and rolling with smooth wheeled, vibratory , tandem rollers and finally with 12-15 tonne weight pneumatic tyre roller to achieve the desired compaction and density completeas per MORTH specification attached in technical specification and as per directions of Engineer-in-Charge. Note: (1) Design of mix to be obtained reputed Government university or private lab having NABL accreditation (2) Weight of each truck will be taken at IIIrd party weighing machine at contractors cost. 28 40 mm compacted thickness with bitumen of grade VG-30 (Indian oil corporation, Hindustan Petroleum, Bharat Petroleum & Hincol) @ 5.5% (percentage by weight of total mix) and filler prepared in Hot Mix Plant. 29 Preparation and consolidation of existing sub grade / W.B.M/soil surface by power road roller of 8 to 12 tone capacity, vibratory roller etc. as required to achieve required compaction of sub grade in line with MORTH specification table 300-2,cleaning and grubbing as required , surface dressing ,dressing to camber, watering, consolidating with road roller including making good the undulations etc. and rolling the existing WBM/sub grade/soil surface to achieve the required compaction as per technical specification all complete as required. 30 Note: 1) Contractor has to carryout the testing of field dry density of soil/sub grade/stone layerbefore laying the GSB for bituminous road at his own cost @ 1 sample (comprising of 3 trials/specimen) (bysand replacement) at every 1500 square meters. Only if FDD >97 % of MDD is achieved, the 1500 square mtr. shall be considered compacted for payment and further clearance of work. Contractor has to arrange the equipment himself for the field testing of the same. 2) Contractor has to carry out determination of OMC and MDD of sub grade/ WBM / Stone layer/soil surface by NABL approved lab @ 1 sample (comprising of 3 trials/specimen) at every 1km for determination of OMC and MDD. 3) Cleaning, grubbing, surface dressing of area to be compactedis deemed to be included in the cost of excavation. No separate payment will be made for cleaning, grubbing, surface dressing of area to be compacted. 31 Breaking of RCC & cutting of reinforcement and disposal of all rubbish up to a lead of 15 Km. by tractor, trolley along with driver & required manpower will be provided by the contractor at his own cost all as per direction of EIC. 32 Providing and laying non-pressure 300mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 33 Providing and laying non-pressure 600mm dia NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 34 Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material with primerby thermoplastic paint applicator machine fitted with profile shoe, glass beads dispensor , heater ,etc all accessories, driven byoperator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 35 Providing, fixing and embedding in concrete 110 mm diaUPVC Pipes conforming to IS 13592 Type A in Drain wallsduring construction of drain walls, Pipes shall be placed as per specification and direction of Engineer-In-Charge. 36 Providing and preparing New Form-work using steel plates , timber planks, shuttering ply, steel supports, bamboos, battens etc . as per requirement for concreting including strutting, propping, staging , fixing,cutting of formwork in curvature as per drawing, and removal includingfinishing of concrete surface forwall, etc asdirected by engineer. Note: Tie rod used for form work will be paid in Re bar item for the length of tie rod which will remain inside concrete 37 Providing and fixing Glow studs of(Approx.) min. size 95mm x15 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) of HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I :809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive. The studs shall beconforming to clause 804 of MORTH specification, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.

BRR:8264573 Bids Are Invited For Custom Bid For Services Hiring of Third-Party Inspection Agency COMPREHENSIVE TESTING OF ALL EQUIPMENT IN KALYANI BP AS PER FACTORY RULE FOR THREE YEARS Total Quantity :

BRR:8263474 Tender For General-Pallivasal Gramapanchayath Project Number-So161/26-She Lodge Electrification -General Electrical Work - Maintenance 2 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point 3 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point 4 90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point 5 90.2.1.5:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Short point 6 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points 7 90.2.1.7:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent plug - Short point 8 OD81418/2025-2026:Supply, conveyance, installation, testing and commissioning of 18 W LED SURFACE SQUARE CEILING LIGHTfittingwith seek surface mounted pressure die- castaluminium luminaire in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver (model-Havevells make- EDGESURFACESQDLR18WLED840S)and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required , Havells or equallant make. 9 OD81419/2025-2026:Supply, conveyance, installation, testing and commissioning of 12 W LED SURFACE SQUARE CEILING LIGHTfittingwith seek surface mounted pressure die- castaluminium luminaire in powder coated white finish in square profile with optimized heat sink for efficient heat dissipation and independent electronic LED driver (model-Havevells make- EDGESURFACESQDLR12WLED857S)and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required , Havells or equallant make. 10 OD81511/2025-2026:Supply Installation testing and commissioning of indoorwall washers fancy light, model number8000131 Philips make TRUMPET black and brass wall light with MS& polycarbonate ,black and brass body with white diffuser colour facncy fittings with 9 W LED E-27 bulb etc as required 11 OD81415/2025-2026:Supply, conveyance, installation, testing and commissioning of Bulk head light fittings with 7/9 W LED bulb directly on wall including giving connections with required length of 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS making good the damages, colour washing etc as required. 12 OD81436/2025-2026:Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished shade with 9W LED and giving connection etc as required 13 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 14 90.15.4.1:Supply Conveyance, installation, testing and commissioning of 20W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 15 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 16 90.4.1:Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required. 17 90.4.5.4:Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply 18 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 19 OD81779/2025-2026:Supply, conveyance, installation, testing and commissioning of 200 mm, single phase, light-duty exhaust fan in plastic bodyin the existing opening, fixing necessary bolt and nuts, making good the damages, etc. as required including giving connections with the required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 20 90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell 21 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 22 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm 23 1.14.1:Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2x1.5 sq.mm + 1x1.5 sq.mm earth wire 24 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm 25 1.17.5:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 X 1.5 Sq. mm 26 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 27 1.17.14:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 2.5 sq. mm 28 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm 29 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 30 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 31 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 32 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 33 90.10.3.14:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A SP switch with indicator 34 90.10.3.32:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3 pin plug top with indicator 35 90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket 36 OD81755/2025-2026:Supplying and fixing DP main swich with PC keyring Tag 2 module 32 A 240 v Key Tag switchfollowing size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 2 Module (75mmX75mm) 37 1.27.1:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.1 or 2 Module (75mmX75mm) 38 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 39 1.27.3:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm) 40 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 41 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door 42 90.11.1.11:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - three phase double cover (IP 42/43) 43 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 44 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 45 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 46 2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 47 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 48 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 49 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps 50 2.16:Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts C curve DP MCB complete with connections, testing and commissioning etc. as required. 51 90.12.7.42:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 52 9.1.34:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) 53 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 54 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 55 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) 56 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 57 OD81422/2025-2026:Supply and Installation of dust and vermin proof , wall mounting , Sintex 3 Phase meter box of size 650x350x250 mm suitable for fixing KSEB meter ,fuse units etc, hinged door connection for the front side with compartments if necessary , providing vision panel for the meter component , knock out for cable entry and exit.( GSMB-6535 ) 58 OD81420/2025-2026:Supply and fixing 63 A 415 V , 2 way neutral link mounted on DMC / SMC base in the existing meter board and giving connection etc. 59 OD81417/2025-2026:Supply and fixing 63 A backelite fuse base with HRC fuse link in the existing meter board and giving connections etc 60 OD81413/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required. 61 OD81414/2025-2026:12x3mm brass bolt with hexagonal/square head, nut and washer 62 OD81416/2025-2026:Supply and providing iron hook for binding service wire 63 OD81762/2025-2026:Supply Installation testing and commissioning of Wall Mounting type Storage water heater ,15 liter capacity ,1.5 KW 230V single phase AC supply , VENUS SPLASH GL 5 star or equallant make etc as required.

BRR:8263393 Tender For General-Devikulam Block Panchayath Project Number- So245/26-Devikulam Block Panchayath Rental Building Electrification-General Electrical Work - Maintenance 2 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point 3 90.2.1.2:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Twin Control light point with 6A, plate ceiling rose - Short point 4 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point 5 90.2.1.5:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Call bell point with 6 A bell push at one end and 6 A, 3 plate ceiling rose at other end - Short point 6 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLSPVC insulated stranded single core copper conductor cable 650V grade, including providingswitch boardmain and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DBs shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points 7 OD86553/2025-2026:Supply, conveyance, installation, testing and commissioning of Bulk head light fittings with 7/9 W LED bulb directly on wall including giving connections with required length of 16/0.20mm 3 core round copper conductor flex wire conforming to relevant ISS making good the damages, colour washing etc as required. 8 90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thicknesscomplete with all accessories andlamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture 9 OD86560/2025-2026:Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm polished shade with 9W LED and giving connection etc as required 10 90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps 11 90.15.4.2:Supply Conveyance, installation, testing and commissioning of 36/40W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) 12 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. 13 OD86550/2025-2026:Supply, conveyance, installation, testing and commissioning of 150 mm, single phase, light-duty exhaust fan in plastic bodyin the existing opening, fixing necessary bolt and nuts, making good the damages, etc. as required including giving connections with the required length of 24/0.20mm PVC insulated and PVC sheathed 3 core round copper conductor flex wire conforming to relevant ISS. 14 90.5.1.3:Supply and fixing the following types of superior quality 250V A.C call bell on existing M.S. box and giving connections with required length of 3 core, 16 / 0.20mm 650/1100V grade PVC insulated and PVC sheathed round copper conductor flex wire conforming to relevant ISS or with the extended original wiring, earthing the MS box and making good the surface as required.Ding dong bell 15 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 16 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm 17 90.6.10.3:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required32 mm 18 1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm 19 1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm 20 1.17.14:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.5 x 2.5 sq. mm 21 1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm 22 1.24.1:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch 23 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 24 1.24.4:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet 25 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 26 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) 27 1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm) 28 90.11.1.10:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - three phase double cover (IP 42/43) 29 90.11.1.14:Supply and installation ofsheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) 30 2.11:Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 31 2.10.1:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 32 2.10.4:Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Triple pole 33 2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps 34 2.13.1:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 35 2.15.2:Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps 36 90.12.7.42:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 25 sq mm with factory made clamp 37 90.12.7.41:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.4 core 16 sq mm with factory made clamp 38 9.1.33:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm) 39 9.1.34:Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 25 sq. mm (28mm) 40 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 41 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) 42 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) 43 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) 44 OD86558/2025-2026:Supply and Installation of dust and vermin proof , wall mounting , Sintex 3 Phase meter box of size 650x350x250 mm suitable for fixing KSEB meter ,fuse units etc, hinged door connection for the front side with compartments if necessary , providing vision panel for the meter component , knock out for cable entry and exit.( GSMB-6535 ) 45 OD86549/2025-2026:Supply and fixing 63 A 415 V , 2 way neutral link mounted on DMC / SMC base in the existing meter board and giving connection etc. 46 OD86556/2025-2026:Supply and fixing 63 A backelite fuse base with HRC fuse link in the existing meter board and giving connections etc 47 OD86554/2025-2026:Supply and providing 25x3mm brass nut and bolt etc. as required. 48 OD86552/2025-2026:12x3mm brass bolt with hexagonal/square head, nut and washer 49 OD86559/2025-2026:Supply and providing iron hook for binding service wire

BRR:8292914 Bids Are Invited For Custom Bid For Services - Pmc Services - Site Supervision , Custom Bid For Services - Providing Resident Engineer For Additional Period , Custom Bid For Services - Site Visit Of Specialist Engineer Hiring of Consultants - Milestone/Deliverable Based Hiring of Consultants Per Person Per Month Based Manpower Outsourcing Services - Man-days based Hiring of Consultants -Milestone/Deliverable Based Hiring of Multimedia Creative Consultants Manpower Based Vehicle Hiring Service Per Vehicle-Day basis Hiring of custom broker - Per Container based Hiring of custom Broker - Per Bill of Entry based Energy Audit Service - Per Resource Per Month Based Hiring of Consultancy Services -Percentage based Hiring, operation and management of ATM - per transaction based Total Quantity :

BRR:8292494 Tender For Selection Of Core Project Management Consulting Agency For Providing Project Management Consulting Support Services To Rsldc Selection Of Core Project Management Consulting Agency For Providing Project Management Consulting Support Services To Rsldc

BRR:8278828 01 Project Management Consultancy For Infrastructural Development Works For Tds-03,04(Phase-Ii) And Tds-05,06(Phase-I) Of Uda, At Ujjain.

BRR:8278772 Invitation for Consultancy Services for Road & Bridges Construction, Four lane Construction, Garden Development, Parking Space Development, Hakarszone Development, Beautification, Building Construction, Commercial Buildings, Public Building, Play Grounds, Sewerage Work and Other Infrastructure Development Work Planning, Drawing, Designing, Preparation of DPR) at Nagar Parishad Gautampura, Dist. Indore

BRR:8274332 Providing Consultancy Services For Preparing Dpr For Development And Beautification Works Atramtek, Dist. Nagpur, Maharashtra

BRR:8273157 Providing Consultancy Services For Preparation Of Comprehensive Drainage Master Plan And Detail Project Report For Storm Water Drainage System Of Notified Area Council, Binka, In The District Of Subarnapur, Odisha

BRR:8272939 Request For Proposal (Rfp) For Project Management Consultancy Services For Construction Of River Bridge Across River Kanh And Along Mr-12 Road Indore

BRR:8271180 Bids Are Invited For Hiring Of Consultancy Services - Percentage Based - Management Consultants; Dpr,Rfp Preparation & Bid Process Management, Project Management; Yes; Hybrid(As Specified In Scope Of Work)

BRR:8295439 Supply Of 1) Anastomotic Stricture Biliary Stent (Fully Covered Stent For Post Liver Transplant, Stent Diameter 6 8 And 10Mm, Short Stent Length 4 5 And 6Cm, Delivery System Profile Not Exceeding 8.5Fr) & 2) Colonic Metal Uncovered Stent (Various Lengths 6 Or 8 Or 10Cm, 30Mm Flare And 25Mm Body)1) Anastomotic Stricture Biliary Stent (Fully Covered Stent For Post Liver Transplant, Stent Diameter 6 8 And 10Mm, Short Stent Length 4 5 And 6Cm, Delivery System Profile Not Exceeding 8.5Fr) & 2) Colonic Metal Uncovered Stent (Various Lengths 6 Or 8 Or 10Cm, 30Mm Flare And 25Mm Body),Srphc293116-Anastomotic Stricture Biliary Stent: A) Biliary Fully Covered Stent For Post Liver Transplant A Nastomotic Strictures. B) Waist Shape Stent For Strong Radial Force And To Prevent Migration. C) Should Have Long Pla Tinum Radiopaque Retrieval String. D) Stent Diameter 6 8 And 10Mm. E) Short Stent Length 4 5 And 6Cm. F) 3 Ro Markers At Both Ends And 2 In The Middle. G) Delivery System Profile Not Exceeding 8.5Fr. Unit:No The Item May Be Supplied With Brand: Wi Lson Cook Medical Inc/Boston Scientific Pvt Ltd/Olympus Medical Systems India Pvt Ltd/Ovesco Endoscopy Ag/Java Stent Or Si Milar ] , Srphc293120-Colonic Metal Uncovered Stent Should Be Made Of Alloy Material To Allow Greater Flexibility And Use In Tortuous Anatomy. Should Have Various Lengths 6 Or 8 Or 10Cm. Should Have A 30Mm Flare And 25Mm Body An D Reconstrainable Even After 70 % Of Deployment. Unit:No The Item May Be Supplied With Brand: Wilson Cook Medical Inc/Boston Scientific Pvt Ltd/Olympus Medical Systems India Pvt Ltd/Ovesco Endoscopy Ag/Java Stent Or Similar ]

BRR:8294766 Supply Of Cordless & Powerstate Brushless 1/2 Inch Digital Torque Wrenchcordless & Powerstate Brushless 1/2 Inch Digital Torque Wrench,Cordless & Powerstate Brushless 1/2 Inch Digital Torque Wrench ( Battery Operated) Providin G 16.9 - 203.4Nm Of Torque Range And Accuracy Within +/-2% & Ccw+/-3% With Following Specifications. Bl Uetooth Enabled Tool With The Mobile App Helps In Tool Tracking, Geo Fencing, Remote Tool Lock Out In Case Of Theft, Digital Inventory. Four Measurement Modes (Ft-Lb, In-Lb, Nm, Kg-Cm) And 15 Available Presets. Adju Stable Run-Down Torque To Control The Tools Output Torque Via The Motor To Prevent Over Torque. Durable Des Ign To Withstand The Most Demanding Job Site Environments. Four Notification Modes That The Tool Is Reachin G, Meeting Or Exceeding The Torque Target (Audible, Led,Lcd, And Vibratory). Accessories: 12 V, 2 Ah Batter Y- 2 Nos. With Suitable Charger - 1 No. Make: Milwaukee Part No: 4933464970 (Or) In Festool (Or) Hinti Only. [ Warranty Period: 30 Months After The Date Of Delivery ] ] => Limited

BRR:8293206 Improvement To Road From Vr 58 Ar Waghi To Umra Taluka Border Km 1/00 To 2/500 Tq. Basmath

BRR:8293044 Bids Are Invited For , Virtual Reality System Total Quantity : 5

BRR:8293030 Bids Are Invited For Custom Bid For Services - Duct Cleaning Work By Robotic Means At Ats Complex, Mumbai Cleaning, Sanitation and Disinfection Service - Outcome Based Total Quantity :

BRR:8292756 Bids Are invited for 2 Year Itext 7 Java Core Instance Subscription License , 2 Year Itext 7 Java Pdfhtml Instance Subscription License , 2 Year Non-Production Itext 7 Java Core Instance Subscription Licence , 2 Year Non-Production Itext 7 Java Pdfhtml Instance Subscription , 2 Year Itext 7 Java Pdfcalligraph Instance Subscription License , 2 Year Non-Production Itext 7 Java Pdfcalligraph Instance Subscription License Total Quantity : 6

BRR:8285354 Bids Are Invited For , Virtual Reality (Vr) Classroom Set Up Total Quantity : 1

BRR:8284268 Bids Are Invited For Amc For Vr Based Training Software Module Of Dornier Aircraft , Virtual Reality (Vr) Classroom Set Up Total Quantity : 1

BRR:8283269 Bids Are Invited For Custom Bid For Services - Development Of 3D Animation Videos For Pilot Projects Of Netra

BRR:8276911 Bids Are Invited For Calibration Services - Research And Development Department; Calibration Of Hot Air Oven Thermometer Weights And Balance; Nabl Labs; Buyer Premises (Onsite)

BRR:8266801 Providing, Laying, Jointing, Testing And Commissioning Of 315 Mm Dia Hdpe Pipeline At From Mahima Smart City Super Corridor Road Of Zone No.16 Ward No.15 (As Per Schedule)

BRR:8264580 Bids Are Invited For Hybrid Wet Filament Winder , Advanced Manufacturing And Robotics Total Quantity : 1

BRR:8263901 Bids Are Invited For Insert Drg. No. 2A26-02-319 , Advanced Manufacturing And Robotics Total Quantity : 100

BRR:8263894 Bids Are Invited For Hex Screw N2-161-10X30 As Per Drg. No. 10809495 , Advanced Manufacturing And Robotics Total Quantity : 40

BRR:8263488 Bids Are Invited For Custom Bid For Services - Lumpsum Rates For 24 Months For Trading Margin For Energy Exchange Trading Gst Not Applicable For Total Qty Of 875825 Mwh , Custom Bid For Services - Lumpsum Rates For 24 Months For Charges For Monthly Energy Settlement Including Gst For Total Qty 24 Ea , Custom Bid For Services - Lumpsum Rates For 24 Months For Obtaining St 11 As Per Statutory Requirement From Transco And Discom Including Gst For Total Qty 10 Ea , Custom Bid For Services - Lumpsum Rates For 24 Months For Obtaining Other Approvals For Stoa Upsldc Or Noar Website Quarterly Or Monthly Registration And Monthly Application Approval Including Gst For Total Qty 24 Ea , Custom Bid For Services - Lumpsum Rates For 24 Months For Coordination With Statutory Agencies For Oa Infrastructure Updation Including Gst

BRR:8263341 Bids Are Invited For Hex Screw N2.161-12 X 100 As Per Drg. No. 10809552 , Advanced Manufacturing And Robotics Total Quantity : 200

BRR:8263319 Bids Are Invited For Procurement Of Ar/Vr Set , Virtual Reality (Vr) Classroom Set Up Total Quantity : 1

BRR:8263276 Bids Are Invited For Stop Bolt Drg. No. 6349435 , Advanced Manufacturing And Robotics Total Quantity : 40

BRR:8263275 Bids Are Invited For Locking Washer N5-41-17 As Per Drg. No. 10658186 , Advanced Manufacturing And Robotics Total Quantity : 80

BRR:8293106 Bids Are Invited For Network Essential Network Rack , Networking / Server Rack Total Quantity : 1

BRR:8292397 Bids Are Invited For Networking / Server Rack (Q2) Total Quantity : 2

BRR:8291706 Bids Are Invited For Custom Bid For Services - Facility Management For Domain And Networking Services