BRR:7640578 Est For Providing Shifting Ic Erecttest, Comm Of Various Infra Hpsebl Smart City Shimla Project Sub Head Rewiring By Replacement Of Complete Old And Damaged Al Wiring With Copper Conductor Wiring In Chief Engineer South Block I Vidyut Bhawan Complex Est For Providing Shifting Ic Erecttest, Comm Of Various Infra Hpsebl Smart City Shimla Project Sub Head Rewiring By Replacement Of Complete Old And Damaged Al Wiring With Copper Conductor Wiring In Chief Engineer South Block I Vidyut Bhawan Complex

BRR:7630833 Tender For Building Of Smart Class Room At Rautara Mansatala-Vi

BRR:7627958 Selection Of Branding Agency For Labelling Of The Projects Through Installation Of Signage As Per The Specifications Under Smart City Mission Jalandhar Selection Of Branding Agency For Labelling Of The Projects Through Installation Of Signage As Per The Specifications

BRR:7619242 Improvement Of Road From Fire Brigade Chowmuhani To Icp Under Agartala Smart City Mission. Phase-Iii. 2Nd Call

BRR:7640115 supply installation testing and commissioning of Hyper-Converged Infrastructure Solution at Cochin International Airport, Name of Work: SITC of Hyper-Converged Infrastructure Solution at Cochin International Airport Sl. No. Item Description 1 SITC of Hyper-Converged Infrastructure Solution 2 Supply of HCI Node (As per the Technical Specification) 3 ITC ofHCI Node (With Enclosure, Mounting Accessories and all other accessories required for the completion of work) 4 Supply of HCI License(As per the Technical Specification) 5 ITC ofHCI License (With License Key and all other accessories required for the completion of work) 6 HCI Node to TOR Switch Network Connectivity 7 Supply of Top-of-Rack Switch(As per the Technical Specification) 8 ITC ofTop-of-Rack Switch (With Enclosure, Mounting Accessories, Cable,Optical transceivers, and all other accessories required for the completion of work) 9 Supply of 25G BASE Active Optical SFP28 Cable, 10M (Same Make as TOR Switch) 10 Supply of25G BASE Active Optical SFP28 Cable, 3M (Same Make as TOR Switch) 11 Supply of 100G QSFP28 100G-LR, 10km SMF, duplex, LC Connector (Same Make as TOR Switch) 12 Supply of Back Up cum Witness Server(As per the Technical Specification) 13 ITC ofBack Up cum Witness Server(With Enclosure, Mounting Accessories and all other accessories required for the completion of work) 14 Supply of Backup Software (As per the Technical Specification) 15 ITC ofBackup Software (With License Key and all other accessories required for the completion of work) 16 Supply of Microsoft Windows Server 2025 Data Centre (As per the Technical Specification) 17 ITC ofMicrosoft Windows Server 2025 Data Centre(With License Key and all other accessories required for the completion of work) 18 Miscellaneous Items 19 Comprehensive Annual Maintenance Contract for 2 years, inclusive of spares and accessories. AMC starts after the warranty period of 5 years. All amounts in Rs inclusive of all taxes, levies, transportation, etc.

BRR:7638364 Bids Are Invited For Supply, Instalaltion, Testing And Commissioning Of 80Tb Nas Storage For Polix Datacenter , Hyper Converged Infrastructure For Data Center (V2) Total Quantity : 1

BRR:7634824 Bids Are Invited For Server Room Roofing , Servo Stabilizer , Cables To The Additional Panel(70 Sqmm) , Cables To The Additional Panel (95 Sqmm) , Additional Electrical Panels For Data Centre , Electrical Plug Total Quantity : 1205

BRR:7633935 Bids Are Invited For Custom Bid for Services - CAMC of Modular Integrated Rack for the period of 3 years As per Scope of Work ANNUAL MAINTENANCE SERVICE -DATA CENTER ASSETS Total Quantity :

BRR:7633173 Bids Are Invited For Custom Bid for Services - COMPREHENSIVE MAINTENANCE CONTRACT OF IT ASSETS WITH RESIDENTIAL ENGINEER ANNUAL MAINTENANCE SERVICE -DATA CENTER ASSETS Annual Maintenance Service - Desktops, Laptops and Peripherals Total Quantity :

BRR:7628443 Bids Are Invited For Boq292025 Mse Server , Backup Appliance , Virtualization Software , , Hyper Converged Infrastructure For Data Center (V2) Total Quantity : 5

BRR:7627096 Bids Are Invited For Custom Bid for Services - Repair of Palladi-M module M(C)- 32M Repair And Overhauling Service Operation And Maintenance Of Lifts (Elevators) Operation And Maintenance Of Substation Operation & Maintenance of Data Centre Assets NIC Empaneled MSP For O&M of IT Infrastructure Operation and Maintenance Services of Power Generator(DG-Set) Repair, Maintenance, and Installation of Plant/Systems/Equipments (Version 2) Hiring of Boats Refilling of Industrial Gases in Cylinders Operation And Maintenance Of Fire Alarm System Operation And Maintenance Of Electro-Mechanical Installations Total Quantity :

BRR:7620405 Bids Are Invited For Custom Bid for Services - For Procurement of GCC Cloud and SOC Services Security Operations Centre Database Licences Managed Database as a Service (Advance) Virtual Machine (Compute) Operation & Maintenance of Data Centre Assets Total Quantity :

BRR:7619089 Bids Are Invited For ANNUAL MAINTENANCE SERVICE -DATA CENTER ASSETS - Storage & Backup Devices; Storage-Server; As OEM, OEM Authorised Service Provider Total Quantity :

BRR:7619043 Bids Are Invited For Integration Of Tank Farm Management System With Sap ((3 3 )) 17 Lakh (S) Tfms Integration With Sap At Hpcl Mazgaon , Tfms Integration With Sap At Hpcl Silvassa , Tfms Integration With Sap At Hpcl Chennai , Tfms Integration With Sap At , System Integration For Networking And Computing Devices Total Quantity : 17

BRR:7635580 Tender For Provision Of Annual Maintenance Contract Without Spares For Scada Control Centre Rtus And Frtus Of Scada Tirunelveli For One Year In Respect Of Tirunelveli Edc

BRR:7634345 Bids Are Invited For Subscription To Market Intelligence Platform & Services Related To Indian Space Sector For A Perio Subscription To Market Intelligence Platform & Services , Business Intelligence And Data Analysis Software (V2) Total Quantity : 1

BRR:7634003 Bids Are Invited For Siemens And Mitsubishi Training Kit Mistsubishi Plc Trainer Kit Consisting Of 32 Mt Plc, Hmi, Vfd, Scada, Plc Software , Plc Based X Y Cartesian System - 1 No , Plc Based Electro Pneumatic Sorting - 1 No, Stamping System - 1 No , Plc Based Motor Control Module - 1 No , Plc Based Ac Drive - 1 No, Vfd Control System - 1 No , Plc Based Water Heater - 1 No, Water Level Kit - 1 No , Plc Based Conveyor System - 1 No, Elevator Kit - 1 No , Plc Based Car Parking - 1 No, Scada System - 1 No , Cascade And Feed Forward Control - 1 No, Field Bus System - 1 No, Acyclic Communication System - 1 No, Ethernet And Lan Technology - 1 No , Siemens Plc Trainer Kit Consisting Of S71500 Plc, Hmi, Vfd, Scada, Plc Software Plc Based X-Y Cartesian, Plc Based Scada, Plc Car , Programmable Logic Controller (Plc) Total Quantity : 18

BRR:7633802 Bids Are Invited For Computers For Data Acquisition And Detector Data Analysis , High End Desktop Computer Total Quantity : 2

BRR:7633776 Bids Are Invited For Custom Bid For Services Data Analytics Service Similar Category Data Analytics Service (Version 2) Work of Data Acquisition, Data Processing and Report Preparation of instruments installed for Monitoring of Dam & Power House appurtenant structures at KHEP, Koteshwar- Tendering regarding Total Quantity :

BRR:7632386 Work Of Augmentation Of Water Supply System Of Pali Birsinghpur Under Amrut 2.0-Survey, Soil Investigation, Design and execution of various works for augmentation of water supply system including construction of a Anicut at Johila River.Providing, Laying, Jointing, Testing and Commissioning of Distribution network including excavation, refilling, road cutting /dismantling, restoration to its original condition, providing and fixing required valves (Sluice, Air, Scour, PRV etc.)Specials, fittings, flowmeters. Construction of valve chambers, thrust blocks and Automation (PLC-SCADA) complete as required as per scope of work

BRR:7631335 Supply of Materials For Construction of Pandhan Road From Sarangpur To Jawalgaon Shiv Farm At.G.P. Sarangpur Tq.Ner Dist.Yavatmal-Supplying trap /granite /quartzite / gneiss stone metal of required size by bringing the boulders at the road side breaking them to required gradation including conveying the boulders and stacking the broken metal etc. complete. (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary, the date of approval will form par b. By Breaking boulder (Hand broken) II. 80 mm metal 2 Supplying trap /granite /quartzite / gneiss stone metal of required size by bringing the boulders at the road side breaking them to required gradation including conveying the boulders and stacking the broken metal etc, complete. (Prior approval of sample stack of broken metal by the Ex Engineer is necessary, the date of approval will form par b. By Breaking boulder (Hand broken) II. 40 mm metal. Spec.No. Rd. 3 Supplying murum having PI < 6 at the road side, including conveying and stacking complete 4 Supplying soft murum at the road side, including conveying and stacking complete. 5 Compacting the subgrade/gravel/over size metal (200mm loose) layers for all width with Power roller having weight 8 to 10 MT. Including necessary, labour, materials and artificial watering complete 6 Compacting the sub grade/gravel/ size metal (100 mm loose) layers for all widths with static roller including necessary, labour, materials and artificial watering complete. 7 Compacting the hard murum / kankar for all widths (200 mm. loose) with static roller including necessary artificial watering complete. 8 Providing and fixing Road junction / Information sign board of size 0.90 m x 0.60 m. prepared on 16 gauge M.S. sheet with angle iron frame of size 35x35x5 mm including painting with one coat of zinc cromate stoving primer and two coats each of green/ white back ground and back side gray stove enamelled, bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows, coated with non pealable crystal clear protective coat retaining 100% reflection including two angle iron post of size 50x50x5 mm of 3.65 m. long inflated at bottom drilled on top and painted in white and black bands of 30 cm. with 4 Nos. high strength G.I. bolts and nuts of size 10 mm dia, and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc. complete. Mild Steel Board with Engineering Grade. PWD SSR 2022-23 IT. NO. 6.47 9 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA PWD SSR IT. NO 24.01 10 Providing cast in situ / ready mix M10 grade cement concrete for head walls of CD work/ retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with Natural / VSI standard Artificial Sand, cement 4.05 bags/cumt). (PWD CSR 2022-2023 IT. NO.11.28) 11 Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 800mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. (PWD CSR 2022-2023 IT. NO.11.10)800 MM DIA 12 450 MM DIA

BRR:7629897 Tender For Providing Basic Amenities To Tourist Devottes At Shri.Chandika Mata Mandir Thl.Mohadi Dist.Bhandara.=-1 84.08 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means.. 2 2.52 Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete. 3 202.15 Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263 4 6.98 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 15of trap/ granite/ quartzite/ gneiss metal for steps including steel centering, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). Providing and laying cast in situ / Ready Mix Cement Concrete Mix-25 for double rim bored pile of 450 milimetre diameter each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade) by tremie arrangement, compaction of concrete including chipping and dressing including chipping and dressing if required etc. complete. (Excluding steel reinforcement). (185) Providing and laying cast in situ / Ready Mix Cement Concrete Mix-25 for double rim bored pile of 600 milimetre diameter each of load capacity as per design and of specified diameter of pile and bulb as directed, sunk to the required depth through all strata except rock,excluding provision of reinforcement including placing with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade) by tremie arrangement, compaction of concrete including chipping and dressing including chipping and dressing if required etc. complete. (Excluding steel reinforcement). Providing and casting in situ cement concrete Mix-25 of trap metal for Reinforced Cement Concrete pile caps as per detailed designs and drawings, including bailing out water manually, centering, formwork, compacting, finishing and curing etc. complete. (Excluding steel reinforcement). Spec. No.: BdF-1 Page No. 297 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (186) Providing and laying cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap / quartzite /granite /gneiss metal for Reinforced Cement Concrete Waist Slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, plywood/ steel formwork, steel props, laying/ pumping, compaction, finishing uneven and honeycombed surface with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (Excluding einforcement, including cover block).(Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin ). Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). Providing and laying Cast in situ/ Ready Mix cement concrete Mix-15 of trap/ granite/ quartzite/ gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood/ steel formwork compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed). With fine aggregate (Crushed sand V.S.I. Grade). Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. Providing fly ash brick masonary with conventional /Indian Standardtype fly ash bricks in cement mortar 1:6 in foundation and plinth including bailing out water manually, striking joints, racking out joints, watering and scaffolding complete. Providing fly ash brick masonary with conventional /Indian Standard type fly ash brick in cement mortar 1:6 for superstructure including striking joints, racking out joints, watering and scaffolding complete. Providing Second class fly ash brick masonry with conventional /Indian Standard type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of two bars of 6 milimetre diameter/ two hoop iron strips 25 milimetre x 1.60 milimetre at every third course, properly bent and bounded at ends scaffolding raking joints and watering complete. Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etc. complete. Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:4 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (189) Providing internal cement plaster 20 milimetre thick in two coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. Providing and fixing chicken mesh of 22 gauge, with about 30 centimetre width at the junction of Reinforce Cement Concrete members and brick work, of approved quality including fixing mesh in position by necessary drilling in concrete/ Burnt Brick Masonry and or tying by binding wire etc. complete. Providing and applying impression 24 carrat Luxury paint of approved make & approved brand Emulsion paint to interior walls and ceilings of approved quality, colour and shade to new surface in two coats, including sub surface prparation by Acrylic putty and Acrylic primer coats including scaffolding, preparing the surface. etc. complete (Low VOC). Providing and applying antipeel paint of approved make & approved brand exterior Emulsion paint of approved quality, colour and shade to and new surface in two coats, including exterior acrylic primer coat, scaffolding, preparing the surface etc. complete (Heat Reflective Paint). Providing and laying vitrified mirror/ glossy finish tiles for Flooring of decorative type having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to Indian Standard 15622: 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed 1:4 cement mortar including neat cement float, filling joints, curing clearing etc. complete. Providing and laying vitrified mirror / glossy finish tiles for Skirting having size 590 milimetre to 605 milimetre x 590 milimetre to 605 milimetre of 8 to 10 milimetre thickness and confirming to IS. 15622- 2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and conforming to Indian Standard 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 centimetre x 45 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etc. complete. Providing and fixing machine cut machine polished 18 milimetre to 20 milimetre thick telephone black/ Amba White/ Cat bary brown/ Ruby Red/ Ocean Brown granite stone for treads and risers of steps and staircases of approved colour and shade with rounded moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete. Providing and laying telephone black/ Amba White/ Cadbury Brown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. Providing and fixing 900 milimetre high S.S. 304 Grade Stainless steel railing with 40 milimetre diameter and 1.5 milimetre thick at top, 40 milimetre diameter and 1.5 milimetre thick vertical supports spaced at 1.5 m center to center and 8 milimetre thick toughened glass including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe complete. (191) Providing and fixing frame with / without ventilator of size as specified with teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting complete. Providing and fixing the country cut teak wood double or single leaf second class fully pannelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick pannels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre, including stainless steel fixtures and fastening and finishing the wood work with oil panting 3 coats. (192) Providing and Fixing 30 milimetre thick both side Prelaminated Solid Panel Poly Venyl Chloride Door Shutter consisting of frame made out of Mild Steel tubes of 19 guage thickness and, size 19 x 19 milimetre for styles and 15 x15 milimetre for the top and bottom rails, Mild Steel frame shall have a coat of metel primer of approved make and manufacture. Mild Steel frame shall be covered with heat mouled Poly Venyl Chloride C channel made from 5 milimetre (+/- 0.25) thick prelaminated sheet of density 600 kilogram per cubic metre, of size 30 milimetre thickness 70 milimetre width out of which 50 milimetre shall be flat and 20 milimetre shall be tapered in 45 degree angle on either side forming stiles and 5 milimetre thick, 95 milimetre wide Poly Venyl Chloride sheet out of which 75 milimetre shall be falt and 20 milimetre shall be tapered in 45 degree angle on the inner side to form top and bottom rail and 115 milimetre wide Poly Venyl Chloride sheet out of which 75 milimetre shall be falt and 20 milimetre shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 milimetre (+/- 0.25) thick Poly Venyl Chloride strip of 20 milimetre width is to be stuck on the bottom side of the c channel prelaminated paneling of 5 milimetre (+/- 0.25) thick Poly Venyl Chloride sheet to be fitted inside the mild steel frame welded/ sealed to the styles and rails with 5 milimetre (+/- 0.25) x 30 milimetre Poly Venyl Chloride sheet beading on either side and joined together with solvent cement adhesive etc ,10 milimetre thickness (5 milimetre (+/- 0.25) x 2 nos ) 20 milimetre wide cross Poly Venyl Chloride sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with 3 nos mild steel powder coated but hinges of size 100 milimetre x 25 milimetre x 2 milimetre using 32 milimetre long steel screws drilled suitable to pass through both the walls of the Mild Steel tube. Other hardwares should be fixed with 19 x 6 milimetre size steel screws including fixture fasting complete as per direction of engineer -in -charge. Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats oil painting complete. (193) Providing and fixing in position (as per I.S.1868:1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 milimetre at weight 0.695 kilogram per running metre.Top and side track section 61.85 x 31.75 x 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts etc, complete with powder coating without box. Providing and fixing in position powder coated aluminium louvered windows ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality complete. Providing and fixing European type white glazed earthenware water closet pan with Unplasticised Poly Venyl Chloride seat and lid with chromium plated brass hinges and rubber buffers including Unplasticised Poly Venyl Chloride and vent pipe up to the outside face of wall without flushing cistern with flush cock and with water Jet and necessary fittings including cutting and making good to the walls and floors testing complete. ( prior approval of sample and brand by Ex. Engineer is necessary before use). Providing and fixing Oval Type Under Counter Wash Hand Basin of 16 x 22 inch size and of special colour shade having Telephonic Black Colour Granite of 180 milimetre thick fixed on Black Kadappa Framework, including Chromium Plated coupling Bottle-Trap using CERA company or equivalent Oval Type Wash basin Model No. 3448 per detailed drawing or as directed by Engineer-In-Charge etc. Complete. 8805.00 Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete. Providing and fixing C.P. 2 Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed Engineer in charge. 2399.00 Providing and fixing Crome Plated BIB cock with wall flange of approved make including necessary sockets/union nut etc. complete. 1108.00 Providing and fixing Crome Plated Angular stop cock with wall flange of approved make including necessary sockets/ union nut etc. complete. 2687.00 Providing and fixing Crome Plated pillar cock long neck with aerator of approved make including necessary sockets/union nut etc. complete. 1625.00 Providing & fixing 15 milimetre diameter Poly Vinyl Chloride Aqua kraft of approved make super jet spray with flange 2 in 1 faucet 1.50 metre long including all accessories etc. complete. Providing and fixing Shower Head, with shower arm of approved make mixer of including all necessary pipe fittings and connections etc. complete as directed by Engineer in charge. 5485.00 Providing and fixing 15 milimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete. Providing and fixing chromium plated towal rod 16 milimetre diameter 75 centimetre in length including all accessories complete. (195) Providing and fixing 10 centimeter Poly Venyl Chloride nahani trap with grating complete. Providing and fixing on walls / ceiling / floor 15 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. Providing and fixing on walls / ceiling / floor 20 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. Providing and fixing on walls / ceiling / floor 25 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. Providing and fixing on walls / ceiling / floor 32 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. Providing and fixing on walls / ceiling / floor 50 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion complete. Providing and fixing 75 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete. Providing and fixing 100 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete. Providing and fixing in position Unplasticised Poly Venyl Chloride ultra violet stabilized 110 milimetre outer diameter cowl dome confirming to Indian Standard - 4985 including making joints with solvent cement complete. Providing and fixing Glass shelf 125 milimetre wide and 600 milimetre long with necessary chromium plated brackets providing T.W. gutties complete. Providing and fixing Poly Venyl Chloride Rain Water pipes of 110 mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with Poly Venyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 mm to 40 mm from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on cement concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Venyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete. Providing and fixing Poly Venyl Chloride Rain water pipes of 160 milimetre outer diameter and having wall thickness of 2.2 to 2.7 milimetre confirming to Indian Standard 13592-1992 including proper rainwater receiving recess with Poly Venyl Chloride plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25 milimetre to 40milimetre from face of wall a fixing with clips of approved quality and number, filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on Cement Concrete or masonry blocks, including necessary scaffolding and maintenance for 3 years for any leakages or dislocations of pipes. All the Poly Venyl Chloride fittings and additional 2 piece socket clips shall be got approved from engineer in charge complete. (The contractor shall give 3 years guarantee bond for payment). Providing and laying in trenches 50 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary excavation, fittings, refilling trenches. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. Providing, laying and fixing, jointing Eco-drain 160 milimetre SN 4 Nu- Drain Unplasticised Poly Venyl Chloride pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per Indian Standard 15328 with fittings such a bends, tees, coupler, etc. jointing with rubber lubricant including necessary excavation, trench refilling with selective excavated material complete. Providing and fixing 15 milimetre. diameter Ball cock medium type with Poly Venyl Chloride float including sockets and necessary fittings and tested as per municipal requirement complete. Providing and fixing 40 milimetre. diameter Ball cock medium type with Poly Venyl Chloride float including sockets and necessary fittings and tested as per municipal requirements complete. Providing and fixing 25 milimetre diameter water meter with non return valve including strainer, sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber ]. Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap. (198) Providing, constructing and fixing 450 milimetre diameter Inspection Chamber made up of Polypropylene/ polyethylene material of thickness 3.5 milimetre and height of 388 milimetre with 160 or 200 milimetre main inlet(s) outlet and 110 and/ or 160 milimetre branch inlets, with 450 milimetre diameter Ultra shaft pipe of HDPE material having height of 460 milimetre, having Reinforced Cement Concrete cover and frame fixing in 150 milimetre thick in Cement Concrete 1:2:4, having crushed sand bed of 150 milimetre thick of size 750 milimetre diameter including excavation and refilling the sides of chamber by sand crushed cushioning 150 milimetre thickness, connecting all required Unplasticised Poly Venyl Chloride fittings with rubber lubricant complete. 10170.00 Providing and fixing High Density Polymer container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 1000 to 20000 liters. Providing and laying concrete pipe of Indian Standard Non Pressure class of 225 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. Providing and fixing 90 centimetre x 60 centimetre Granite plate engraving 10 centimetre height letter, figures including painting the letters/ figures with approved colour and shade complete. 8627.00 Providing and fixing in position aluminium strips of size 50 milimetre x 3milimetre for nosing the steps including fixing with screws and raval plugs, bending and cutting to the required shape and size, finishing with paint, necessary mortar bedding of 1:3 cement mortar to get exact line and level including watering and curring complete Providing and installing Bio Digester unit based on DRDO technology made of fibre reinforced plastic (FRP) having composition and following technical specifications and including necessary pipe and accessories up to 3 meter length, excluding the necessary excavation for installing the bio digester. Percentage of fibre glass (glass content in fibre glass should be minimum 30 percent): -33.33 percent Percentage of polyester resin: - 66.67 percent, Water absorption (as per ASTM):-0.30 percent, Flammability as per ASTM, Tensile strength:- 115 MPA Specific Gravity at 25 degree centigrade 1.45, Izod impact strength:- 65KJ/M2, Heat defection/distort temperature:-65deg C, Corrosion resistance (Non Corrosive) fitted with Inlet pipe size rigid PVC: -100mm Outlet pipe size rigid PVC:-80mm, Gas outlet rigid PVC with Valve: 20mm, Bacteria immobilization PVC mattes (on all partition) With DRDO TOT licensee and latest batch certificate(month & year of supply) and capacity as below Up to 15 user size (1.0mx1.0mx1.0m), Capacity of biodgester:-1000 liters, Area of top, bottom and side walls: - 6 sq.m, Area of partition walls: 2 sq.m, Total weight of frp: - 54 kg, Bacteria inoculums quantity: 400 liters, Minimum thickness of side walls / top and bottom: 4mm, Number of inside partitions: - 3, Minimum thickness of partition wall: 3mm Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc., having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 milimetre x 35 milimetre x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation and labour etc. complete. Testing Charges for conducting BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test. Testing Charges for conducting BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of Bricks) test. Testing Charges for conducting CERAMIC TILES / VITRIFIED TILES Water Absorption, Moduls of Rapture (Set of 6 Tiles) test. Testing Charges for conducting CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test. Testing Charges for conducting STEEL BAR TESTING Upto 16 mm Set of 3 Bars) Testing Charges for conducting STEEL BAR TESTING Above 16 mm Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight- Per Meter, Bend / Rebend Test, Proof Stress).

BRR:7629895 Providing Basic Amenities To Tourist Devottes(Parking) At Renukadevi Mandir Thl.Mahoor Dist.Nanded.=-Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 milimetre thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etc. complete using 100 percent crushed sand. (186) Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc., having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 milimetre x 35 milimetre x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation and labour etc. complete. Testing Charges for conducting CONCRETE PAVING BLOCKS Compressive Strength,Water Absorption test (Set of 8 Blocks).

BRR:7629893 Providing Basic Amenities To Tourist/Devotees At Biroba Ban Arewadi, Tal-Kavtheel Mahaakaal, Dist- Saangli.=-1 224.39 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 metre beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means.. 2 1042.97 Supplying hard murum at the road site including conveying and stacking complete. 3 1042.97 Spreading the hard murum for side width complete. 4 2607.44 Compacting the hard murum side widths including laying in layers on each side with power roller including artificial watering complete. 5 503.28 Providing soling using 80 milimetre size trap metal in 15 centimetre layer including filling voids with crushed sand/ grit, ramming, watering etc. complete. 6 335.53 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). 7 2895.58 Providing and fixing heavy duty inter locking concrete Grey Shot Blasted (150×150×60 mm, 200×100×60 mm) paving blocks of 60 mm thickness of having a strength of 300 kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 8 152.40 Providing and fixing heavy duty inter locking concrete Coloured Red Shot Blasted (150×150×60 mm, 200×100×60 mm) paving blocks of 60 mm thickness of having a strength of 300 kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete 9 335.09 Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etc. complete. (187) 10 335.09 Providing leather finished polishing to Granite Stone slab by continuous grinding in 4 coats of different bits to receive rough and matt finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete. 11 895.70 Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering Incharge. Using Concrete Batching and Mixing Plant. 12 1.00 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc., having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 milimetre x 35 milimetre x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation and labour etc. complete. 13 1.00 Testing Charges for conducting BASIC TEST OF CEMENT.Standard Consistancy Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength and Soundness test. 14 1.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test. 15 2.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Sieve Analysis test. 16 2.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test.(189) 17 1.00 Testing Charges for conducting FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. 18 10.00 Testing Charges for conducting CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test. 19 5.00 Testing Charges for conducting CONCRETE PAVING BLOCKS Compressive Strength,Water Absorption test (Set of 8 Blocks). 20 3.00 Testing Charges for conducting SOIL / MURUM Sieve Analysis test. 21 3.00 Testing Charges for conducting SOIL / MURUM Liquid limit & plastic Limit test. 22 1.00 Testing Charges for conducting SOIL / MURUM C.B.R. Test (Lab) Excluding compaction test. 23 1546.25 Royalty Charges 24 1546.25 Surcharge 2% on Royalty Charges

BRR:7629892 Providing Basic Amenities To Tourist At Nandani, Tal- South Solaapur, Dist- Solaapur-1 1125.00 Removing grass, gazer grass and disposing off out of building premises including making clean the ground by shovel and phavaras etc. complete. 2 73.87 Excavation for foundation in hard murum and boulders including removing the excavated material up to a distance 50 metres, beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting, dewatering etc. complete. (Lift upto 1.5 metre) by Mechanical Means. 3 79.91 Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 metre) by Mechanical Means. 4 59.10 Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete. Spec. No. : Bd.A. 11/Page No. 262 5 177.94 Filling in plinth and floors with contractors material/ brought from outside and approved by Engineer incharge in layers of 15 centimetre to 20 centimetre including watering and compaction etc. complete. Spec. No. : Bd.A. 11/Page No. 263 6 135.58 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete. 7 70.08 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix- 10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). (187) 8 54.79 Providing and laying in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 9 24.10 Providing and laying cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). (188) 10 85.72 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). 11 19.86 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-30 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 12 3.42 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 13 2.14 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Chajja as per detailed design and drawings including centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (190) 14 2.83 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-25 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Canopy as per detailed designs and drawings including centering, formwork, laying/ pumping, compacting and roughening the surface if special finish is to be provided and curing etc. complete (excluding reinforcement), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 15 1.69 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including centering, formwork, cover blocks, laying/ pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (191) 16 15.22 Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. 17 32.31 Providing second class Burnt Brick masonry with conventional /Indian Standard type bricks in cement mortar 1:6 in foundations and plinth of inner walls /in plinth external walls including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering complete. 18 119.44 Providing second class Burnt Brick masonry with conventional / Indian Standard type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding complete. ( 19 99.09 Providing cement based water proofing treatment terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer cement mortar 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with cement mortar1:3 admixed with approved water proofing compound and finally top finishing with average 20 milimetre thick layers of same mortar added with jute fiber at 1 kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300 milimetre x 300 milimetre making the junctions at the parapet rounded and tapered top for required height, with drip mould the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs. 500/- including ponding test etc. complete. 20 627.46 Providing internal cement plaster 12 milimetre thick single coat in cement mortar 1:4 without neeru finish concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 21 520.83 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. 22 133.68 Providing internal cement plaster 6 milimetre thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. 23 582.63 Providing and laying polished Tandur Stone flooring 25milimetre to 30milimetre thick and of reqd.width in plain / diamond pattern on a bed of 1:6 C.M. including cement float, filling joints with neat cement slurry, curing, polishing and cleaning complete. 24 8.13 Providing sills of Granite other than makrana 20 milimetre to 25 milimetre thick, on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing, polishing, rounding edges and cleaning complete. 25 50.00 Providing and fixing on walls/ ceiling/ floors, 50 milimetre diameter heavy grade having embossed as Indian Standard Institute Mark galvanised iron pipes of 6.33 kilogrames per metre with necessary fitting, remaking good the demolished portion and applying primer of anti-corrosive oil paint in 2 coats complete. 26 8.77 Providing and fixing in required position skirting or dado of polished Kotah Stone slab 25 milimetre to 30 milimetre thick fixed on base on plaster of cement mortar 1:4 including cement float, filling joints with cement slurry, curing rubbing, polishing and cleaning complete. 27 25.00 Providing and fixing on walls / ceiling / floor 50 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion complete. 28 30.00 Providing and fixing on walls / ceiling / floor 40 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. 29 25.00 Providing and fixing on walls / ceiling / floor 25 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. 30 15.00 Providing and fixing on walls / ceiling / floor 15 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. 31 2.00 Providing and fixing 15 milimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete. (195) 32 2.00 Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete. 33 4.00 Providing and fixing 10 centimeter Poly Venyl Chloride nahani trap with grating complete. 34 2.00 Providing and fixing European type white glazed earthenware water closet pan with Unplasticised Poly Venyl Chloride seat and lid with chromium plated brass hinges and rubber buffers including Unplasticised Poly Venyl Chloride and vent pipe up to the outside face of wall 10 litre enameled low level flushing cistern with fittings pipe stop tap brackets for fixing cistern 32 milimetre diameter Unplasticised Poly Venyl Chloride flush pipe with fittings and clamps, 20 milimetre diameter Unplasticised Poly Venyl Chloride overflow pipe, mosquito proof couplings Galvanised Iron chain and pulley, with water Jet and fitting including cutting and making good to the walls and floors testing complete. ( prior approval of sample and brand by Ex. Engineer is necessary before use). 35 2.00 Providing and fixing wall hung white wash basin of size 350x450x165 milimetre with approved make pillar cock, C.P. Angular stop cock long thread approved make continental including SS bottle trap of approved make having necessary pipe connection up to the outside face of the wall etc complete as directed by Engineer in charge. 36 2.00 Providing and fixing C.P. a 2-Way BIB cock with wall flange of approved make including necessary sockets/ union nut etc. complete as directed by Engineer in charge. 37 3.00 Providing and fixing 15 centimetre x 10 centimetre salt glazed stoneware gully trap in cement concrete 1:4:8 out side the building including cast iron grating in the sink, connecting glazed stonewre pipe brick masonry chamber with cast iron lid and cast iron grating for the gully trap. 38 6.00 Providing & constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre with Reinforced Cement Concrete raft in Black Cotton soil area including cost of reinforcement, 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and airtight 75 milimetre thickReinforced Cement Concrete cover medium duty 100 kilogram etc. complete. 39 10.00 Providing and fixing 75 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete. 40 6.00 Providing and fixing 100 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete. 41 25.00 Providing and laying concrete pipe of Indian Standard Non Pressure class of 150 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete. 42 1.00 Providing and fixing hume pipe septic tank 900 milimetre diameter with vent pipe and cap including necessary (excluding excavation and laying) 43 1.00 Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brick-bats. 44 28.93 Providing and laying ceramic tiles of RAK/ Kajaria/ Nitco/Asian or equivalent make having size 30 centimetre x 45 centimetre for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 45 6.93 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 centimetre x 30 centimetre and conforming to Indian Standard 15622-2006 (Group- B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. 46 6.00 Providing and Fixing mat finish stainless steel (of 302 grade) railing with top pipe of 50 milimetre diameter and vertical pipe of 38 milimetre diameter at 0.60 metre center to center or as required and horizontal pipes of 25 milimetre diameter in three rows, all pipes of 2 milimetre thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 milimetre diameter above newel post of 75 milimetre diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use). 47 180.00 Painting letters upto 20 centimetre height complete, brushes, coir brushers dusting cleaning including cost of paint complete. (198) 48 761.14 Providing and applying priming coat over concrete/Masonry/Asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, greese, dirt and other foreign matter and sand papering as required complete. 49 761.14 Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. complete. 50 520.83 Providing and applying two coats of exterior acraylic emulsion paint conforming to corresponding I.S.of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days etc. complete. 51 559.76 Providing and fixing self supporting steel roofing system (Proflex) for a Godown or alike made up of structural grade steel sheet of 912 milimetre width ( tolerance + / - 2 milimetre ), moulded at site using mechanical press dies to the desired curve and shape to form 605 milimetre wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 21.30 metre having arch rise as 4.26 metre, arch length 25.13 metre.The base material made up of imported galvalume steel complying to ASTM A792 having base metal thickness of 1.00 milimetre ( tolerace + / - 0.02 milimetre ) with alloy coating AZ 150 and paint coating of regular modified polyster, top coat 25 micron and bottom coat 12 micron as per approved colour, including fixing hangers, clamps as may be necessary of Proflex standard, including fixing sky light of 2 milimetre thick polycarbonate sheet of size 2 feet x 14 feet and turbo ventilator of 24 inch diametre to be installed at every 30 feet along the length of roof including finishing, testing and cleaning complete. 52 0.47 Providing and fixing frame with / without ventilator of size as specified with non teak wood for doors and windows including chamferring, rounding, rebating, iron holdfast size 300 milimetre x 40 milimetre x 5 milimetre with oil painting, complete. 53 25.13 Providing and fixing the country cut teak wood double or single leaf second class fully pannelled door shutter with 35 milimetre thick style and rail with 25 milimetre thick pannels with openable fan light as per detailed drawings. Excluding the door frame 60 milimetre x 100 milimetre, including stainless steel fixtures and fastening and finishing the wood work with oil panting 3 coats. 54 1.80 Providing and laying telephone black/ Amba White/ Cadbury Brown/ Ruby red/ Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete.55 3.15 Providing and Fixing 30 milimetre thick both side Prelaminated Solid Panel Poly Venyl Chloride Door Shutter consisting of frame made out of Mild Steel tubes of 19 guage thickness and, size 19 x 19 milimetre for styles and 15 x15 milimetre for the top and bottom rails, Mild Steel frame shall have a coat of metel primer of approved make and manufacture. Mild Steel frame shall be covered with heat mouled Poly Venyl Chloride C channel made from 5 milimetre (+/- 0.25) thick prelaminated sheet of density 600 kilogram per cubic metre, of size 30 milimetre thickness 70 milimetre width out of which 50 milimetre shall be flat and 20 milimetre shall be tapered in 45 degree angle on either side forming stiles and 5 milimetre thick, 95 milimetre wide Poly Venyl Chloride sheet out of which 75 milimetre shall be falt and 20 milimetre shall be tapered in 45 degree angle on the inner side to form top and bottom rail and 115 milimetre wide Poly Venyl Chloride sheet out of which 75 milimetre shall be falt and 20 milimetre shall be tapered on both sides to form lock rail.Top,bottom and lock rail shall be provided either side of the panel. An additional 5 milimetre (+/- 0.25) thick Poly Venyl Chloride strip of 20 milimetre width is to be stuck on the bottom side of the c channel prelaminated paneling of 5 milimetre (+/- 0.25) thick Poly Venyl Chloride sheet to be fitted inside the mild steel frame welded/ sealed to the styles and rails with 5 milimetre (+/- 0.25) x 30 milimetre Poly Venyl Chloride sheet beading on either side and joined together with solvent cement adhesive etc ,10 milimetre thickness (5 milimetre (+/- 0.25) x 2 nos ) 20 milimetre wide cross Poly Venyl Chloride sheet as gap insert for the rail and bottom rail. Door to be fixed to frames with(202) 3 nos mild steel powder coated but hinges of size 100 milimetre x 25 milimetre x 2 milimetre using 32 milimetre long steel screws drilled suitable to pass through both the walls of the Mild Steel tube. Other hardwares should be fixed with 19 x 6 milimetre size steel screws including fixture fasting complete as per direction of engineer -in -charge.56 74.12 Providing and fixing mild steel grill work for windows, ventilators 20 kilogram per square metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete. 57 74.12 Providing and fixing in position (as per I.S.1868:1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 milimetre at weight 0.695 kilogram per running metre, Top and side track section 61.85 x 31.75 x 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre . As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts etc, complete with colour Anodising with box. 58 33.65 Providing and applying a base coat comprising of kilogram Polydee-MC and 1 kilogram fresh cement after wetting the surface followed by drying the surface for 2 days, apply primer coat of TP-40 and after drying, applying Polydee-11 two component (mixing ratio 2 A: 1 B) Antibactorial food grade coating inside drinking watertank in two coats with time interval of minimum hours covering 7 years guarantee on Court Fee Stamp Paper of Rs.100/- etc complete. 59 402.41 Providing and laying in situ cement concrete M30 with tremix treatment for 200 millimeter thickness for flooring with groove cutting of 4 millimeter wide and 20 millimeter deep with necessary refilling with bitumen complete. 60 151.49 Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 milimetre thickness of having a strength of 400 kilogram per square centimetre of approved quality and shape on bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etc. complete using 100 percent crushed sand. 61 1.00 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc., having rectangular shape of 1.20 metre x 0.90 metre size made out 18 gauge (1.25 mm.) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border/ messages/ symbols etc. with approved colour shade paint complete, on Mild Steel angle of size 35 milimetre x 35 milimetre x 3 milimetre frame with properly cross braced Mild Steel angles of size 35 milimetre x 35 milimetre x 3 milimetre duly painted including Two Mild Steel angle iron posts of size 65 milimetre x 65 milimetre x 6 milimetre, 3.65 metre long painted with alternate black and white bands of 25 centimetre width including all fixtures etc. and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation and labour etc. complete. 62 2.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Sieve Analysis test. 63 2.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test. 64 4.00 Testing Charges for conducting FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. 65 3.00 Testing Charges for conducting BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test. 66 1.00 Testing Charges for conducting CERAMIC TILES / VITRIFIED TILES Water Absorption, Moduls of Rapture (Set of 6 Tiles) test. 67 26.00 Testing Charges for conducting CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test. 68 1.00 Testing Charges for conducting Concrete Mix Design (With all Tests on basic materials). 69 1.00 Testing Charges for conducting CONCRETE PAVING BLOCKS Compressive Strength,Water Absorption test (Set of 8 Blocks). 70 10.00 Testing Charges for conducting MORTAR Compressive Strength ( Set of 3 Cubes) test. 71 2.00 Testing Charges for conducting STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) 72 2.00 Testing Charges for conducting STEEL BAR TESTING Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress).73 313.52 Royalty Charges 74 313.52 Surcharge 2% on Royalty Charges

BRR:7629891 Tender For Providing Basic Tourist Amenities At Machal, Tal- Lanjaa Dist Ratnaagiri=1 950.00 Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grass along roadside making the ground clean by showel and phavaras etc. complete. 2 30.00 Removal of plants/ ficus grown by pulling out root system embedded in masnory, cutting stem and application of high/ gur/ lime formulation as specified by the Architect or other patented chemical biocide treatment such as biocide Glycel (iso proplamine salt of glyphosate) or other chemical as specified by the Engineer in charge etc. complete. 3 259.13 Excavation for foundation in laterite rock (soft or hard) including trimming and levelling the bed for the foundation, removing the excavated material up to a distance of 50 metres beyond the building area, stacking as directed, dewatering and back filling with available murum, watering, ramming etc. complete, (Lift upto 1.5 metre) by Mechanical Means. 4 158.85 Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 centimetre to 20 centimetre thick including hand packing and compacting etc. complete. 5 120.00 Providing & erecting 6 m high (clear height) galvanised octagonal pole with foundation bolts having bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OHPL/ OPL (187) 6 103.06 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-15of trap/ granite/ quartzite/ gneiss metal for steps including steel centering, plywood/steel formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1: plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.),with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisition enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand V.S.I. Grade). 7 37.08 Providing and laying in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete work in foundations like raft, strip foundations, grillage and footings of Reinforced Cement Concrete columns and steel stanchions etc. including bailing out water, formwork, laying/ pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided, (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). (188) 8 5.39 Providing and laying cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/ pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). 9 19.06 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/quartzite/ gneiss metal for Reinforced Cement Concrete Beams and Lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete with fine aggregate (Crushed sand V.S.I. Grade). (189) 10 120.00 Providing and erecting galvanised 1000mm double arm sword type bracket with FRP dome and ball as per specification no. OH-PL/BKT 11 61.20 Providing and laying Cast in situ/ Ready Mix cement concrete in Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Pardi of required thickness including centering, formwork, cover blocks, laying/ pumping, compacting, curing, finishing and rougheningthem if special finish is to be provided and curing complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 12 9.55 Providing and fixing in position Thermo Mechanically Treated (TMT) FE -500 bar reinforcement of various diameters for Reinforced Cement Concrete pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. (190) 13 251.21 Providing internal cement plaster 12 milimetre thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. 14 755.91 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 milimetre thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to milimetre thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. complete. 15 78.41 Providing and Laying of polished Chira Brick masonry with conventional type bricks in cement mortar 1:6 in plinth including bailing out water manually, striking joints on unexposed faces, pointing with cement mortar 1:3 on exposed face and watering complete 16 72.73 Providing and laying ceramic tiles having size 30 centimetre x 30 centimetre conforming I.S.15622/2006 (group D II-A) and 7 to 8 milimetre thick for flooring required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/ colour cement slurry cleaning curing etc. complete. 17 47.70 Providing and laying ceramic tiles having size 30 centimetre x 30 centimetre for dado and skirting required position with readymade adhesive mortar approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. 18 1007.12 Providing and applying priming coat over concrete/Masonry/Asbestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, greese, dirt and other foreign matter and sand papering as required complete. 19 275.61 Providing and applying pearl/ luster finish paint of approved colour and shade to the existing plastered surface including scaffolding preparing the surface applying acrylic wall putti etc. complete. 20 18.75 GARDEN SOIL: -Supplying on site garden soil well sieved 80 % to pass through I.S. sieve of 10 mm size free from stones rubbish like dried grass roots and other such materials. The soil should be fresh from quarry. The color of the soil generally is red. The soil will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc. (Lead charges per 70 km. considered. Excluding Royalty) 21 14.76 Providing and fixing partition with kadappa stone of all sizes and 25 milimetre thick polished on both side and edges to original including fixing in position in cement mortor 1:4 curing polishing, cleaning etc complete. 22 19.08 Providing and laying in position flooring of telephone black/ Amba White/ Cat bary brown/ Ruby red/ Ocean Brown granite stone of approved shade and size 18 milimetre to 20 milimetre thick on bed 1:6 cement mortar including cement floats striking joints, pointing in Cement Mortar 1:3 curing and cleaning etc. complete. 23 9.00 Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 milimetre with lock plate of 3.15 milimetre thickness reinforced with 35 x 35 x 5 milimetre angle section fitted with sliding bolts and handles for both sides, deep Mild Steel channel section of depth and thickness not less than 65 milimetre and 3.15 milimetre respectively with hold fast arrangments, Mild Steel Bracket plate 300 x 300 x 3.15 milimetre minimum size and shape with square bar suspension shaft of minimum 32 milimetre diameter, hood cover of Mild Steel sheet not less than 0.9 milimetre thickness and of any size at top and safety devices including mechanical gear operation arrangementconsisting of worm gear whwwls and worms of high grade cast iron or mild steel and one coat of red lead primer complete. (I. S. 6248 - 1979) with mechanical gear. 24 8.40 Providing and fixing in position, Single shuttered aluminium extruded powder coated openable door of overall size 0.90 metre x 2.40 metre with aluminium door frame of powder coated section 101.60 x 44.75 milimetre, 3.18 milimetre thick and shutter compr Indian Standard Institute ng of powder coated section having bottom and lock rail of size 150 milimetre x 44.5 milimetre, 2.90 milimetre thick top rails 47.62 x 44.45 milimetre, 3.18 milimetre thick, vertical style 47.62 x 44.45 milimetre, 3.00 milimetre thick and for shutter plain glass panes 5 milimetre thick for top panels and 12 milimetre thick both side laminated phenol bonded particle board panels for bottom panels, Indian Standard Institute mark, heavy duty, Hydraulic floor spring of 150 kilogram capacity, having heavy duty concealed lock, necessary beeding, glazing clips, Poly Venyl Chloride gaskets, 250 milimetre length tower bolts, 150 milimetre diameter pad handle, as per detailed design and drawing or as directed by engineer in charge including all materials, labours and equipments etc. complete. 25 13.23 Providing and fixing 32 milimetre thick one piece single moulded puff ABSTRONE BUTADYNE STYRINE (ABS) Door shutter for internal use including toilets, made up of outer ABS sheet of 1.2 milimetre thick having puff insulation of 35 to 40 kilogram per cubic metre density and 10 milimetre diameter tor steel bars 2 Numbers, wooden block to receive fixtures, having Mild Steel hinges 100 milimetre length, Mild Steel handles 150 milimetre length and 10 milimetre diameter sliding door bolt complete. (195) 26 1.08 Providing and fixing in position (as per I.S.1868:1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 milimetre at weight 0.547 kilogram per running metre and window frame bottom track section 61.85 x 31.75 x 1.20 milimetre at weight 0.695 kilogram per running metre, Top and side track section 61.85 x 31.75 x 1.30 milimetre at weight 0.659 kilogram per running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre. Inter locking section 40 x 18 x 1.10 milimetre at weight 0.469 kilogram per running metre and handle section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre and top section 40 x 18 x 1.25 milimetre at weight 0.417 kilogram per running metre . As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 milimetre thick plain glass with all required screws and nuts etc, complete with colour Anodising with box. 27 2.16 Providing and fixing in position powder coated aluminium louvered windows ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 milimetre x 1.22 milimetre box type, 5 milimetre thick sheet glass louvers, of approved quality complete. (196) 28 1.32 Providing waterproofing in Water Closet and bath including brick bat coba in all position including providing and laying 12 milimetre bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound at the rate of 1kg/ per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kilogram per bag of cement grouting and finishing the top layer with 20 milimetre thick brick bedding in cement mortor 1:3 with waterproofing compound 1 kilogram per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etc. complete. 29 60.00 Providing and fixing on walls / ceiling / floor 20 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed complete. 30 5.02 FARMYARD MANURE: -Supplying on site well decayed, well dried, well powdered, without clods and free from stones, dried grass and other rubbish material. The color of the manure generally is black. The manure will be measured by measuring box. (Farma) Item includes Transporting, loading -unloading etc ( Lead charges per 50 km. considered.) 31 50.00 Providing and fixing 75 milimetre diameter stabiliser pipe /Poly Venyl Chloride soil vent /waste pipe and with necessary fixtuers and fiting such as bends, tees, single junctions slotted vent, clamps complete.32 5000.00 Providing and fixing High Density Polymer container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters. 33 120.00 Providing and fixing 20 milimetre diameter screw down bib/ stop tap of brass including necessary socket union nut complete. 34 10.00 Providing and fixing 100 milimetre diameter chromium plated brass showers rose to 15 milimetre diameter supply pipe including necessary bend and socket complete. 35 96.00 Providing and fixing 25 milimetre diameter concussion push button type brass/ gun metal self-closing tap including necessary socket complete.36 3.00 Providing and fixing White Glazed Earthenware full stall type Urinal with Poly Venyl Chloride flushing cistern of 5 litre capacity with fittings, inlet pipes and stop tap, brackets for fixing the cistern, 32 milimetre diameter Poly Venyl Chloride flush pipe with fittings and flushing arrangement including lead soil pipe, lead trap and soil pipe connection up to the outside face of the wall. 37 4.00 Providing and fixing White glazed earthenware Wash Hand Basin of 63 x 45 centimetre size with bottle trap including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete. 38 3.00 Providing and constructing Brick Masonry Inspection Chamber 60 centimetre x 45 centimetre and 90 centimetre including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round Glazed Stone Ware pipes, Brick Masonry, plastering from inside and air tight cast iron C. I. cover of 75 Kg with lid and frame fixed in cement concrete etc. complete. 39 120.00 40-Watt Philips Solar Light with Solar Panel – 4-Year Warranty40 4.00 Providing and fixing 450 milimetre x 550 milimetre size superior type Belgium mirror with 16 milimetre diameter nickel plated towel rod complete. 41 10.00 Providing and fixing 10 centimeter Poly Venyl Chloride nahani trap with grating complete. 42 3.00 Providing and fixing reinforced cement concrete Medium duty (100 kilogram) cover of size 60 centimeter x 45centimeter with frame over inspection chamber complete. 43 10.00 Providing and fixing Crome Plated Angular stop cock with wall flange of approved make including necessary sockets/ union nut etc. complete.44 10.00 Providing and fixing Crome Plated Two way BIB cock of approved make including necessary sockets/ union nut etc. complete. 45 4.00 Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 milimetre size of of approved make including soil pipe, vent pipe up to outside face of wall, 100 milimetre diameter Galvanised Iron plug bend inlet pipe all fittings, cutting and making good walls, floors complete. 46 2.00 Providing and fixing Orissa type white glazed earthenware 575 milimetre water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories complete. 47 45.00 Providing & fixing BENCH IN CEMENT MORTOR/CONCRETE WITH Rmt WOODEN FINISHING ON ALL EXTERNAL SURFACE. Bench should have min. 2.1m to max. length 2.4m with 0.55m wide seat & 0.40m high back for resting. beach should have 4 to 6 supports/Legs as per requirement from ground in 1:1.5:3 ratio Concrete with 4 bar 12mm as a main & distribution 8mm Tor steel at 150mm c/c. Rate includes proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including Cement. Sand, Aggregate, chemical, adhesive, chickenmesh, primer, paint, polish, paper, etc. all material labor. scaffolding, excavation, pcc, for steel etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. 48 44.45 Providing and laying polished Kotah stone flooring 25 millimeter to 30 millimeter thick and of reqd. width in plain/ diamond pattern on a bed of 1:6 cement mortar including cement float,filling joints with neat cement slurry,curing,polishing and cleaning complete.49 750.00 Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 60 milimetre thickness of having a strength of 300 kilogram per square centimetre of approved quality and shape on a bed of crushed sand of 25 to 30 milimetre thick including skirting joints and cleaning etc. complete 50 175.00 Providing and fixing in position Guard Railing as per Drawing Number 15 Type C, dated 20-4-79, with three rows of 50 milimetre diameter Galvanised Iron pipe 30 centimetre apart and fixed in Mild Steel channels of section 125 x 65 x 6 milimetre spaced 2.5 m center to center 1:2:4 cement concrete bedding of size 45 x 30 centimetre as per detailed drawing, with 3 coats of approved yellow and black paint including necessary excavation in any strata. 51 1.00 Providing soak pit of size 120 centimetre x 120 centimetre x 120 centimetre including excavating and filling with brickbats.52 150.00 Providing and fixing on walls / ceiling / floor 40 milimetre diameter Chlorinated Poly Venyl Chloride pipe with necessary fittings, remaking good the demolished portion. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or directed complete. 53 13.90 Providing and fixing green marble of 18 to 20 milimetre thick for door frame/ dado/ window boxing etc. on Cement Mortar 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. 54 25.00 Providing and laying concrete pipe of Indian Standard Non Pressure class of 225 milimetre diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.55 4055.00 Providing and casting in situ or precast tapering Reinforced Cement Concrete Mix-20 Barrier type Kerb without gutter (as per IRC:86-1983) embedded 125 milimetre below ground level over Mix-10 Plain Cement Concrete finished neatly with Cement Mortar 1:2, setting the same in Cement Mortar 1:2, including the required excavation in any strata and removing the excavated stuff anywhere in city and redoing the surface as specified and directed by Engineering In-charge. Using Concrete Batching and Mixing Plant.56 9.00 Providing and fixing of retro- reflectorised informatory sign board rectangular/Square in shape having area less than 0.9 square meter made out of 4 mm aluminum composite panel with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting- HIP) having pressure sensitive adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25mm x 25mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on one no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt ~ 3.9 mtlong firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including fixures and transportation etc.complete.The nut bolts of board with angle iron post/supporting structure after fixing at site has to be electrically welded. Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer including the Digitally Printed areas with Latex printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate along with sheeting manufacturer attested 3 years outdoor weathering test report from Indian govt lab must be submitted to the Engineer in charge by the contractor/supplier. (206) 57 285.00 Providing & fixing BAMBOO FINISH RAILING IN CEMENT MORTOR of 1:3 proportion with appropriate thickness resembling bamboo of diameter 2 1/2 to 3 inch. Railing clear Height 1.0m with underground support of minimum 0.45m depth of 1:1.5:3 ratio concrete of size 0.3 x 0.3 x 0.6m. vertical supports should be at min. 1.0 m intervals & with 10mm Tor steel 2nos in each horizontal member & 3nos in each vertical member. Railing will have three horizontal & two diagonal members in each panel. All external surfaces will have bamboo finish. Rate includes proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apex Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including cement, Sand, chemical, adhesive, chikenmesh, primer, paint, polish, paper, etc. all material, labor, scaffolding, etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. 58 4.32 Providing and fixing board displaying information, such as Name of work, Tender cost, Name of Contractor, Work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made up of 4 mm aluminum composite pannel sheet with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of Class B (Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive adhesive. Retro reflective sheeting with specified background, border and back side reto reflective symbols, letters, numerals, arrow as per IRC: 67-2012 Table No 8.3,on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Class B (Type IV High intensity microprismatic grade sheeting- HIP) shall have 7 years written warranty from the manufacturer including the Digitally Printed areas with Latex printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier. Supply, fixing and installation of 4 mm thick Aluminium Composite Panel (ACP) of approved colour for external cladding in combination of solid and metallic colours, including all necessary Framework, support and complete weather sealing as per architectural drawing. The Aluminium Composite Panel (ACP) should be made out of thermoplastic core of low-density polyethylene LDPE (100% virgin mix), sandwiched between two aluminium sheets of ALLOY GRADE- 5000 series, each not less than 0.50 mm thick, total thickness of aluminium composite panels not to be less than 4 mm, the exposed surface thereof shall have Stove lacquered finishing coat not less than (26 + - 2) micron (containing minimum 70% kynar 500 based PVDF) of colour and shade as per architectural design. The inside surface (facing the building exterior surface)shall have polyster based powder coating not less than 25 Micron with protective peel-off foil on the exterior face (peel off film will in no case leave any adhesive mark over the composite panel surface after it is peeled off). The supporting framework shall be made out of 50 mm X25mm X 3mm thick Aluminium section to be spaced horizontally and vertically for fixing of panel of size 900 mm X 1200 mm and fixed to the building structure as per design through 50mm X50mm X5 mm MS angle clamps prefixed to masonry or slab, columns with Hilti make anchor fastener screws. The fixing of panel to be done with the help of VHB tapes and screws and all the sealing of joints to be done with weather sealent Silicon as directed by Engineer-in-charge. (Prior permission of S.E. is necessary before inclusion of this item in estimate) Providing tuck pointing with cement mortar 1:3 for stone/ Brick masonry including scaffolding and curing etc. complete. Labour charges for providing groove in external plaster having width and spaced as directed by engineer incharge etc. complete. Providing and fixing hume pipe septic tank 900 milimetre diameter with vent pipe and cap including necessary (excluding excavation and laying)Filling in plinth and floors with approved excavated material in 15 centimetre to 20 centimetre layers including watering and compacting etc. complete. Spec. No. : Bd.A. 11/Page No. 262(210) 64 11.00 Providing & fixing Gazebo IN CEMENT MORTOR/CONCRETE WITH WOODEN FINISHING ON ALL EXTERNAL SURFACE Gazebo should have min. 3m square in size 3.5m height at centre and 3m height at periphery with 4 Vertical supports at edge. Gazebo should have 8 rafters (1 to connect cach outer support to central support and 4 to connect each other) and 3 purlins between each rafter to support slab. Vertical supports should comprises of 100mm square MS pipe of C-class with total size of 200mm (including outer concrete), rafter should comprises of 50mmX100mm MS box pipe 6mm thick with total size of 150mm X 200mm (including outer concrete), purlins should comprises of 30mmX50mmX6mm MS angle section with total size of 75mmX 100mm (including outer concrete). Outer concrte around every element should be in 1:1.5:3 ratio Concrete. The concrete for slab above purlins should be of 100-120mm thick in 1:1.5:3 ratio RCC with 8mm Tor steel at 150mm c/c bothways. Rate includes proper cleaning of surface by sand paper application of 1 coat of Apex exterior grade primer above that 2 coat of exterior grade Apes Paint as a base coat & 1 coat of Apex Paint for making wooden finish/grains & with 2 final coat of Apex clear polish including Cement. Sand, Aggregate, chemical, adhesive, chickenmesh, primer, paint. polish, paper, etc. all material, labor. scaffolding, excavation, pec, for steel etc. all complete. Work done should be as per a approved sample & the instructions of engineer incharge. 65 8.10 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 66 3240.00 Excavation for roadway in hard murum and boulder including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50 metre and spreading for embankment or stacking as directed. 67 1242.00 Supplying hard murum at the road site including conveying and stacking complete. 68 810.00 Providing, laying and spreading soil on a prepared sub grade, pulver Indian Standard Institute ng, mixing the spread soil in place with rotavator with 3 percent of slaked lime with minimum content of 70 percent of of CaO, grading with motor grader and compacting with the road roller at Optimum Moisture Content to the desired density to form a layer of improved sub base. 69 1080.00 Construction of granular sub-base by providing close graded Material,spreading in uniform layers with Motor Grader/ Paver on prepared surface, mixing by mix in place method with rotavator at Optimum Moisture Content and compacting with vibratory roller to achieve the desired density complete as per clause 401. For Grading I Material. 70 540.00 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting with vibratory roller to the required density. By Mechanical Means Grading-I, using Screening Type-B (11.2 milimetre Aggregate). 71 5400.00 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials & bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen at the rate 0.98 kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 metric tonne etc. complete. 72 5400.00 Providing and applying tack coat on the prepared surface heating by flames in boiler and spraying bitumen with sprayer on Granular surface with primer at 2.75 kilogram per 10 Square Metre using VG-30 grade bulk bitumen. 73 540.00 Providing and laying Bituminious Macadam using crushed aggregate of Grading 1, premixed with bituminious binder, transported at site with Vehicle Tracking System, laid over a previously prepared surface, finished to the required grade, level, alignment and rolling to achieve the desired density for 80/100 milimetre compacted thickness with using Drum Mix type hot mix plant with Superwisery Control and Data Acquisition, having complying essential features of hot mix plant as per IRC-27:2009 specified conditions and attachments such as electronic load sensor based belt conveyers, automatic synchronization of bitumen and aggregate fedder, built in dust controller system and Programmable Logic Controller for Drum Mix plant, Sensor Paver and Vibratory Roller excluding prime/Tack coat complete with VG-30 grade Bitumen of dose 3.30 percent. 74 120.00 Excavating Hard murum/Stone metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete. (214) 75 755.91 Providing and applying two coats of exterior acraylic emulsion paint conforming to corresponding I.S.of approved manufacture and of approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applying primer coat, scaffolding if necessary and watering the surface for two days etc. complete. 76 5.40 Providing and laying Cast in situ/ Ready Mix cement concrete Mix-20 of trap/ granite/ quartzite/ gneiss metal for Reinforced Cement Concrete Slabs and Landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/ pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based Programmable Logic Controller with Superwisery Control and Data Acquisitionenabled Reversible Drum Type mixer/ concrete Batch Mix plant (Pan mixer) etc. complete, with fine aggregate (Crushed sand V.S.I. Grade). 77 120.00 Making Cement concrete foundation including excavation (45 x 45 x 120)cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45)cm/45cm dia. x 45cm height plinth duly plastered, with necessary curing and finishing complete. (for 6m pole) (215) 78 375.00 Providing on site required variety of Shrubs (free from weeds /diesease etc.) 30 cms.8 X 10 , Well Developed ,Fresh, Healthy half in bloom, free from pest and diseases 79 4.00 Providing and fixing FRP Model of statues Complete. statue Having Size - 5ft x 7ft wiith necessary fittings and fixtures, including Transporation and Installation. Design As Directed by Engineer - In Charge 330,000.00 80 6.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Water Absorption, Specific Gravity,Impact Value Crushing Value test. 81 13.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Sieve Analysis test. 82 8.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Flakiness Index/ Elongation Index test. (216) 83 2.00 Testing Charges for conducting BASIC TEST OF AGGREGATE. Stripping Value test. 84 1.00 Testing Charges for conducting G.S.B. Mix Design test. 85 2.00 Testing Charges for conducting FINE AGGREGATES. Fineness Modulus (Sieve Analysis),Silt & Clay Content test. 86 1.00 Testing Charges for conducting BRICKS Water Absorption (Set of 5 Bricks), Compressive Strength ( Set of 5 Bricks), Efflorescence (Set of 5 Bricks) test. 87 27.00 Testing Charges for conducting CONCRETE Compressive Strength OF Cement Concrete Cube (Set of 3 cubes) test.88 1.00 Testing Charges for conducting Concrete Mix Design (With all Tests on basic materials). 89 2.00 Testing Charges for conducting MORTAR Compressive Strength ( Set of 3 Cubes) test. 90 5.00 Testing Charges for conducting SOIL / MURUM Sieve Analysis test. 91 6.00 Testing Charges for conducting SOIL / MURUM Liquid limit & plastic Limit test.(218) 92 1.00 Testing Charges for conducting SOIL / MURUM Compaction Test (Proctor Density). 93 2.00 Testing Charges for conducting SOIL / MURUM C.B.R. Test (Lab) Excluding compaction test. 94 15.00 Testing Charges for conducting SOIL / MURUM Field Density test by Sand Replacement Method. 95 6.00 Testing Charges for conducting BITUMEN Penetration, Softening Point, Flash & Fire Point and Specific Gravity test.(219) 96 6.00 Testing Charges for conducting BITUMEN Viscosity test. 97 3.00 Testing Charges for conducting BITUMEN Extraction Test. 98 1.00 Testing Charges for conducting BITUMEN B.M.Job Mix Design (Excluding bitumen). 99 2.00 Testing Charges for conducting Sieve analysis and extraction of Bituminous mix. 100 16.00 Testing Charges for conducting Density test of Bituminous core. 101 2.00 Testing Charges for conducting STEEL BAR TESTING Upto 16 mm (Set of 3 Bars) 102 1285.20 Royalty Charges 103 1285.20 Surcharge 2% on Royalty Charges

BRR:7629147 Bids Are Invited For Scada System Replacement At Mpspl Sply Scada Serv Mms-Trombay , Sply Scada Serv Bms- Pakni , Sply Gprs Server , Sply History Server , Sply Web Servers , Sply Server Rack , Sply Netwrk Rack , Sply Gps Time Serv , Sply Router , Sply L2 Eternet Swtch , Sply Firewall , Sply Ews Trombay , Sply Ows Dtandrt , Sply Of Rws , Slpy A3 Plus A4 Printer , Sply Type 2 Rtu Sv Stn , Sply Type 1 Rtu , Sply Type 2 Rtu Mov Stn , Sply Mini Rtu , Sply Pdb , Sply Pdt , Sply Gprs Dual Sim Modem , Sply Gprs Single Sim Modem , Sply Spare , Ins And Comm Scada Serv Mms-Trombay , Ins And Comm Scada Serv Bms-Pakni , Ins And Comm Gprs Server , Ins And Comm History Server , Ins And Comm Web Server , Ins And Comm Server Rack , Ins And Comm Netwrk Rack , Ins And Comm Gps Time Serv , Ins And Comm Router , Ins And Comm L2 Eternet Swtch , Ins And Comm Firewall , Ins And Comm Ews Trombay , Ins And Comm Ows Dtandrt , Ins And Comm Of Rws , Ins And Comm A3 Plus A4 Printer , Ins And Comm Type 2 Rtu Sv Stn , Ins And Comm Type 1 Rtu , Ins And Comm Type 2 Rtu Mov Stn , Ins And Comm Mini Rtu , Ins And Comm Pdb , Ins And Comm Gprs Dual Sim Modem , Ins And Comm Gprs Single Sim Modem , Training , Un-Install Existing Equ At Dt-Trombay , Un-Install Existing Equ At All Locs , Shifting Of Uninstall Equip , Pwmc 1St Year , Pwmc 2Nd Year , Pwmc 3Rd Year , Pwmc 4Th Year , Pwmc 5Th Year , Pwmc 6Th Year , Pwmc 7Th Year , Pwmc 8Th Year , Server Supervisory Control And Data Acquisition (Scada) Lab Kit Total Quantity : 206

BRR:7629098 Bids Are Invited For Supply & Installation Of Hardware And Licensed Software For Real-Time Data Capture, Analysis, Visual Supply & Installation Of Hardware And Licensed , Cnc Simulator Total Quantity : 1

BRR:7625925 Construction Of Scada Room And Chlorine Room At Manbazar-Ii (Zone - Vii Viii) Of Purulia Pipe Water Supply Scheme(Southern Sector) Within Purulia District Under Purulia Division, Phe Dte.

BRR:7624766 Bids Are Invited For Instrument Setup For Magnetic Sensor Calibration Three-Axis Helmholtz Coil , Amplifier For Three-Axis Helmholtz Coils , Open Loop Control Unit For Helmholtz Coil System , Closed Loop Control Unit System For Helmholtz Coil System , Three-Axis Magnetic Field Sensor, Data Acquisition Unit, Control Software, Cables And Accessories , Helmholtz Coil Breakout Box , Magnetic Susceptibility Meter Three-Axis Helmholtz Coil, Amplifier For Three-Axis Helmholtz Coils, Open Loop Control Unit For Helmholtz Coil , Digital Storage Oscilloscope Total Quantity : 7

BRR:7621470 Tender For Maintenance & Repair to Roads……..Pot hole filling and resurfacing of roads in Old Jalna Industrial Area - Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stoneProviding and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone layers metal 100% crusher broken metal with conical crusher plant , heating and spraying the bitumen of specified grade @ 2 kg / sqm , spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates) 2 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to siteOpen Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING Batch mix type hot mix plant without SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) 3 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) 4 Excavator (JCB JS 80 ) Providing,supplying Excavator / Loader/ JCB with fuel and operator etc.complete. 5 Carrying out below mentioned tests on BITUMEN as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete.Penetration, Softening Point, Flash & Fire Point, Specific Gravity 6 Viscosity 7 Ducility/Elastic Recovery 8 Carrying out below mentioned tests on MPM AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete.Water Absorption, Specific Gravity, Impact Value, Crushing Value 9 Sieve Analysis 10 Flakiness Index & Elongation Index

BRR:7621469 Tender For Pot Hole Filling And Resurfacing Of Roads In Bhokardan Industrial Area. ; 1 Providing and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stoneProviding and constructing 75 mm. thick Modified Penetraction Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 mm. stone layers metal 100% crusher broken metal with conical crusher plant , heating and spraying the bitumen of specified grade @ 2 kg / sqm , spreading 12mm.size chips compacting with three wheel static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat of specified grade of bitumen at the rate of 0.30 Kg Sqm. on existing bitumen surface. (VG-30 bulk bitumen rates are considered to arrive at rates) 2 Open Graded Premix Surfacing- Providing and Laying OGC 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates premixed with bituminous binder transported to site with VTS , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but excluding prime / tack and Seal coat. For Bitumen of specified grade--USING Batch mix type hot mix plant without SCADA, Paver and Vibratory roller ( Over MPM Surface) (VG-30 bulk bitumen rates are considered to arrive at rates) 3 Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT. etc. complete. (VG-30 bulk bitumen rates are considered to arrive at rates) 4 Excavator (JCB JS 80 ) Providing,supplying Excavator / Loader/ JCB with fuel and operator etc.complete. 5 Penetration, Softening Point, Flash & Fire Point, Specific Gravity 6 Viscosity 7 Ducility/Elastic Recovery 8 Carrying out below mentioned tests on MPM AGGREGATE as per frequency, in the Govt. laboratory as per relevant standards. Submitting test results and retesting if required including all charges etc complete.Water Absorption, Specific Gravity, Impact Value, Crushing Value 9 Sieve Analysis 10 Flakiness Index & Elongation Index

BRR:7619504 Tender For Construction Of220/132 Kv, 1X160 Mva Gss At Dalot (Upg.) [Distt.- Pratapgarh]Including Supply Of All Equipments/Materials, Erection (Including Civil Works), Testing And Commissioning - MAIN MATERIAL/ ITEMS 2 Auto Transformer: 3 220/132kV, 160 MVA AutoTransformer with all accessories (excluding transformer Oil) as per technical specification 4 Insulating Oil for 160 MVA 220/132 kV Auto Transformer as per S-I , (1) above 5 Digital RTCC Panel consisting of Digital RTCC relay as per technical Specification for transformers at S-I (1) above 6 Circuit Breakers 7 220 kV Circuit Breakers 8 220kV circuit breakers (3 Ph.) Along with support Structure 9 2500 A, 50 kA 10 132 kV Circuit Breakers 11 132 kV circuit breakers (3 Ph.) Along with support Structure 12 1250 A, 40 kA 13 Instrument Transformers 14 Capacitor Voltage Transformer 15 Single-Phase, 220 kV, 4400 pf CVT 16 Current Transformer (1-Phase) 17 220 kV CT 18 1000/1 A, 5C 19 132 kV CT 20 1000/1 A, 3C 21 C&R Panels & SAS system (Complete in all respect, refer Section-V A, B, Part-III, Volume-II) 22 New Substation 23 Control Panel for 220 kV Transformer (220 kV Side) Type: SAS-THCB 24 Relay Panel for 220 kV Transformer (for both HV & MV) Type: SAS-THRB 25 Control Panel for 220 kV Feeder Type: SAS-FCB 26 Relay Panelfor 220 kV Feeder Type: SAS-FRB 27 Control Panel for 220 kV Bus Coupler Type: SAS-BCCB 28 Relay Panel for 220 kV Bus Coupler Type: SAS-BCRB 29 220 kV Busbar Protection Relay Panel Type: SAS-BBRB 30 Control Panel for 220 kV Transformer (132 kV Side) Type: SAS-TLCB 31 Relay Panel for 220 kV Transformer (132 kV Side) Type: SAS-TLRB 32 Station HMI [Industrial grade Computer with 21TFT monitor as per specification requirements] 33 Station HMI (Hot Standby)[Industrial grade Computer with 21TFT monitor as per specification requirements] 34 HMI View Node[Industrial grad Computer with 21TFT monitor as per specification requirements] 35 A3 Size B&W Laser Printer 36 Substation Automation System Network Panel Type SAS-NW 37 Modems (both sending and Receiving End) for communication to RCC & Sub SLDC for PLCC] 38 Data Concentrator Unit (DCU) at Substation for RAS mounted in suitable enclosure & fully wired 39 Software: Application as well as System Software as per specification requirements for various hardware elements for meeting of functional requirement of the specification. 40 Substation Auxiliary Monitoring Panel Type SAS-SAMP 41 Other Items: 42 Fiber optic cables, connectors, ethernet cables, jack panels connectors, patch cords etc. for completing the Substation LAN as per specification requirements. 43 Transducers, Sensors etc. (if not considered in the respective equipment/ items) for accumulating monitoring data as per the specification requirements for switchyards. 44 Surge Arresters 45 220 kV LA 46 132 kV LA 47 Batteries & Battery Charger 48 Batteries (Sizing shall be as per requirement of technical specification) 49 220 V [Min. 600 AH] 50 48 V [Min. 600 AH] 51 Battery Charger System 52 220 V Float and Boost 53 50 V Float and Boost 54 Lighting System 55 Outdoor Lighting & other Works 56 Lighting Fixture Type FL-1 57 Lighting Fixture Type FL-2 58 Outdoor Receptacle 59 Type-RP 60 Type-RO 61 Substation Premises Lighting 62 Lighting poles 63 Type-L1 64 Type-D1 65 Street Lighting Type-SL-L1 for mounting on poles 66 Street Lighting Type-SL-D1 for mounting on Poles 67 Sub-Lighting Boxes/Panels Type -SLP at Lighting Mast and Other Loaction as designated complete with all controgears and accessories, items etc. 68 Lighting PanelType ACP-2 as per technical specification 69 Lighting PanelType ACP-3 as per technical specification 70 Indoor Lighting & Other Works 71 Electrification 72 Electric Fitting (if not covered under Civil Works) with G.I. Conduit, Junction Boxes, pull out boxes, copper wiring, Modular Switchboards, Modular Switches, GI Wire (16SWG) etc. for control room,Hall and administrative office building as per the requirements of the specifications 73 Illumiation 74 Lighting fixtures and Receptacles (including accessories/ materials etc. as per requirement alongwith complete accessories andmounting arrangements) 75 Indoor Lignting Panels 76 Lighting Panel (Indoor)Type ACP-1 as per technical specification 77 Lighting Panel (Indoor)Type DCP as per technical specification 78 Wall mounted fans Approx. 400 mm sweep 79 Ceiling Fan - Approx. 1400mm sweep with electronic Step regulator 80 Exhaust Fans 81 Fire Fighting System 82 Nitrogen Injection Fire Protection System for Auto Transformer (160 MVA ) complete in all respects. 83 DCP Type 84 i) 5 Kg. 85 ii) 10 Kg. 86 Carbon di oxide type – 6 Liters. 87 Foam Type- 9 Liters 88 Sand type 89 i) GI Buckets 9 liters capacity 90 ii) Steel Stands for four buckets 91 Air Conditioning System 92 Air Conditioning for the Rooms specified in the specifications 93 1.1kV Grade PVC insulated Al. conductor FRLS power cables and copper conductor armoured FRLS control cables [Excluding the wiring required for electrical & Lighting fittings/fixtures installation in control room and other building] 94 Control Cable (PVC) 95 4 CX4 Sq. mm 96 19Cx2.5 sq.mm 97 Substation Structures 98 Standard Lattice Structure [Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for lattice steel structure as per specification requirements]: 99 Non-Standard type Pipe Support Structure [Design, engineering, procurement of materials, fabrication galvaising, proto-assembly, FOR destination delivery & erection including nuts, bolts, gusset plates, base plates, foundation bolts, fixing arrangement for control cabinets/MB of equipments and other accessories for Pipe Support structure as per specification requirements] 100 Isolators 101 220 kV (3-Phase) (Horizontal DOUBLE BREAK) 102 1600A, 50KA, isolator with one E/S 103 Post insulators for above Isolator 104 1600A, 50KA, isolator with two E/S 105 Post insulators for above Isolator 106 1600A, 50KA, isolator without E/S 107 Post insulators for above Isolator 108 1600A, 50KA, isolator without E/S (TANDEM Type) 109 Post insulators for above Isolator 110 132 kV (3-Phase) (Horizontal DOUBLE BREAK) 111 1250Aisolator without E/S 112 Post insulators for above Isolator 113 Switchyard Erection 114 Busbar & Interconnections 115 New Substation/ Switchyard 116 220 kV Switchyard Works: 117 Main-I Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/PorcelainLong Rod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays] 118 Main-II Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Pocelain Long Rod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays] 119 Aux Bus: 220 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string(DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, hardware, Clamps, Connectors, spacers, corona shields etc. as per Layout arrangment of the subsation and specification requirements [for 3 bays] 120 220 kV Overhead Jack Bus (for DMT Layout) on Twin ACSR Zebra(Bus-Coupler Bay)/ Single ACSR Zebra (Transformer/ Line on ACSR Zebra) with conductor, busbar material, insulator string (DT/SS), AF Type Disc Insulators/ Porcelain Longrod Insulators, clamps, connectors, spacers etc. as per Substation Layout arrangementand specification requirements[ for 1 Bay] 121 Twin ACSR Zebra 122 Single ACSR Zebra 123 Equipment Interconnections to Main Bus, Overhead Bus including Single ACSR Zebra (for Line), Twin ACSR Zebra (forTransformer bay & B/C Bay), bus-bar materials, clamps,connectors, spacers, corona shields, including equipment connectors, Junction box including of all accessories etc. for the following: 124 220 kV DMT-type layout 125 Line bay 126 Transformer bay 127 Bus-Coupler 128 Bus CVT Interconnections to Main Buses including Single ACSR Zebra, clamps,connectors, junction box including of all accessories etc. 129 132 kV Switchyard Works: 130 Main Bus: 132 kV Twin ACSR Zebra Bus with conductor, busbar material, insulator string (DT/DS), AF Disc Insulators/ Porcelain Longrod Insulator, hardware, Clamps, Connectors, spacers etc. as per Layout arrangment of the subsation and specification requirements [for 4 bays] 131 Aux Bus: 132 kV Single ACSR Zebra Bus with conductor, busbar material, insulator string (DT/DS), AF Disc Insulators/ Porcelain Longrod Insulators, hardware, Clamps, Connectors, spacers etc. as per Layout arrangment of the subsation and specification requirements [for 4 bays] 132 132 kV Overhead Jack Bus (for Main & Aux Layout) on Twin ACSR Zebra(220 kV Transformer/Bus-Coupler Bay),Single ACSR Zebra(132 kV Transformer/Bus-Coupler Bay) Single ACSR Panther (Line on ACSR Panther) on Single Panther ( with conductor, busbar material, insulator string, Disc Insulators, hardware, clamps, connectors, spacers etc. as per Substation Layout arrangementand specification requirements[ for 1 Bay] 133 Twin ACSR Zebra 134 Equipment Interconnections to Main Bus, Overhead Bus including Twin ACSR Zebra (Bus Sectionalizer/ 220 kV Transformer /Bus-Coupler Bay)/ Single ACSR Zebra (132 kV TransformerBay) Single ACSR Panther ( Line on ACSR Panther), bus-bar materials, clamps,connectors, spacers including equipment connectors, Junction box including of all accessories etc. for the following: 135 132 kV Main & Aux-type layout 136 Line bay 137 Transformer bay 138 Bus Post Insulators (BPI) 139 220 kV 140 132 kV 141 Earthing & Lightning Protection System 142 Main, Auxilary Earthmats, Risers etc. for complete earthing in the Switchyard Area 143 28 mm Dia MS Rod 144 50X12 mm GS Flat 145 Earth Enhancing Compound for treated pits as above and other requirement as per specification 146 Cleat type clamps(8mm thick) for earthing down conductor (10.98 mm dia), 50x12 mm GS Flat and 50x6 mm GS flat 147 Cu/Al Flexible braids Grounding Conductor connection to MS/GS Flats 148 Earth Wire for Shielding Protection of Switchyard 149 7/3.15 Galvenized Steel Wire 150 Earthwire tension clamps with D Shackle assembly 151 PG calmp to suit 7/3.15 mm GS earth wire 152 Cleat clamp on structure to suit 7/3.15 mm GS earth wire/ 50 X 12 mm GS Flat 153 Pad clamp on structure to suit 7/3.15 mm earth wire and 75 x 12 GS flat 154 Lug to suit 7/3.15 mm earth wire 155 Other Clamps, Copper Earth Bond etc. as per layout diagram for erection of Earth Wire 156 GI Channel 100x50x6 mm 157 Bay Marshalling KIOSK 158 200 way (Stud Type Connectors) 159 AC Distribution Boxes (Outdoor Type) 160 Conduits, Cable Trays [Perforated and Ladder Type], Cable Tags, Cable Clamps, Cable Lugs,Cable sealing system, Gland Plates, Junction Boxes, PVC pipes, hume Pipes, Nylon type Trefoil Clamps etc.[Excluding the conduits, junction boxes etc. required for electrical & Lighting fittings/fixtures installation in control room and other building] 161 Other Steel Structures/ members [items such as Galvenized/ Mild Steel Channels, Angles, Plates, round, joist, Hot dip galvenized Nut-Bolts, Electro Galvenized Spring Washersetc. considered for this component of price schedule] to be designed/ provided by the bidder for the completion of project [This shall not include the steel to be used in the civil works] 162 LT Switchgear 163 220VDCDB 164 48V DCDB 165 PLCC EQUIPMENTS 166 220 kV Wave trap (2000A, 0.5 mH, 40 kA) 167 SSB single Channel Carrier Set (40 W) suitable for transmitting Data and super imposed channels along with Remote subscriber facility and emergency calling set. 168 A.F. Protection coupler microprocessor based suitable for Four commands. 169 Coupling Devices for Phase to Phase coupling having Band width programmable at site with protective Device & balancing transformer matching with line impedance of respective voltage level. 170 HF Armoured Coaxial cable having 75 Ohms unbalanced impendance. 171 Microprocessor based 32/16 line Electronic Private Automatic Exchange (EPAX) with PLCC interphasing facility 172 Telephone Sets (Push Button Type) 173 5 Pair jelly filled armoured telephone cable having copper conductor of Dia. 0.5 mm 174 5 Pair jelly filled un armoured telephone cable having copper conductor of Dia. 0.5 mm 175 TESTING & MEASURING INSTRUMENTS, TOOLS & TACKLES AND MISCELLANEOUS ITEMS 176 (A) TESTING EQUIPMENT/ INSTRUMENTS [This shall consist of all the standard accessories, cables, software etc. required for satisfactory operation of equipment meeting functional requirements] 177 Insulation Tester (5000 Volts, Digital) 178 SF6 Leakage Detector 179 Digital Multimeter 180 Digital Clamp Meter 181 PLCC Maintenance/Testing Equipments: 182 200Hz to 620KHz selective level meter including impedance return loss measuring attachments compatible with level generator (at sl.ii below) 183 Level generator with a range at 50Hz to 620kHz including facility for synchronization with SLM 184 8 digit time interval & frequency counter with the frequency range of 10 Hz to 10MHz & timer range of 1 microsec to 1 sec in decade steps. 185 Dual range 15 MHz oscilloscope with a display screen 8x10 sq.cm and the input impedance of 1 M ohm/25 pF with a deflection coefficient of 5Mv/div to 20 V/div. 186 4-1/2 digit LCD Multimeter with input impedance of 10Mohm & with a range of 0.1 mV to 1000 V DC, 0.1mV to 600v AC, 0-10 AMP AC,(40hz to 10KHz) & 0-20 Mohm With builtin power –supply. 187 Print testing Kit for PLCC terminal, protection coupler, EPAX , As per specifications appended at Annexure- V2-P3-S19-2, Volume-II, Part 3, Section-XIX 188 (B) Maintenance Tools& Tackles 189 Oil Sampling Bottle (1 Liter Capacity) 190 Vaccum Cleaner 191 Telescopic ladder aluminium 6 meter height 192 Ring spanner set 193 Tube spanner set 194 Pipe wrench 24 inch 195 Pipe wrench 18 inch 196 Hydraulic crimping tools up to 630 sq.mm 197 Threading die set for pipe threading 198 Welding machine (arc welding) 10kVA 199 Heavy duty drilling machine 200 Bench Vice 201 Insulated cuttingplier 12 inch 202 Insulated cuttingplier8 inch 203 Screw driver 18 inch 204 Screw driver 12 inch 205 Hammer 8 lbs 206 Hammer 2 lbs 207 Chain pulley block 5 ton 208 Pipe derrick 209 Allen Keys 210 Box Spanners 211 (C )Office and Miscellaneous Equipments/ Items 212 Insulation Rubber mat (1mX2mX 12 mm) 213 Isulation Rubber Gloves (15 kV Tested) 214 Furniturefor Control Room Building: 215 SCADA Room Furniture (Control Desk for specified consoles and Revolving Chair) matching with the overall interiors as per specification 216 Executive Desk bulit in wood and steel with lockable drawings on both side (6 feetX2 ½ feetx 2 ½ feet) 217 Junior executive table with three drawings on right side One Cup board left side with prelaminated decolam top 20mm thick over painted M.S. Frame ( 4 ½ feet x 2 ½ feetx 2 ½ feet). 218 Library Shelf with Glass Door (min 4 Shelf) 219 Steel tubular “S” type with continuous and one feet dia 14guage pipe, cane seat backing, teak wood with quality cane. 220 Archival Storage 4 Drive Type 221 Lateral Filing Cabinets 222 3 Drawer Unit 223 4 Drawer Unit 224 Steel Almirah of size 6 ½ feetx 3 feet x 19 inch with four shelves making five compartments in 22 guage or better with two way locking system. 225 Steel Almirah (with Glass doors) of size 6 ½ feetx 3 feet x 19 inch with four shelves making five compartments in 22 guage or better with two way locking system. 226 Minor Almirah of size 4 ½ feet x30 inch x 17 inch with three shelves making four compartments in 22 guage or better with two waylocking system. 227 Steel rack of size 5 feet x 3 feet x 16 inches with six shelves making five compartments (22 guage). 228 Steel file trays of size 16 inches x11 inches x 3 inches of guage 14 SWG. 229 Steel stools of size 15 inch x15 inch x 18 inch square pipe 16 guage 230 Steel waste paper baskets of size 12 inch (H) and Approx. 10 inch Dia Round. 231 Key board (wooden) with Glass door 232 First Aid Box 233 Shock Treatment Chart [Laminated with Frame] 234 Safety Instruction Boards [ Laminated with Frame] 235 (D) Drinking Water Arrangement 236 Water Cooler (Storage type, Storage Capacity 40 Ltr, Cooling Capcity 20 Ltr./hr) 237 RO/ Water Purifier 238 Refrigirator (380 Lt.) 239 Substation Name Board [1 No. Glow Type & 1 No. Painted Type] [Size and Color etc. be got approved from owner] 240 Danger Plate [Size and Color etc. be got approved from owner] 241 MANDATORY SPARES 242 (A) 220/132 kV TRANSFORMER 243 Bushing with metal parts & gaskets of each rating including Neutral bushing 244 Local and remote winding temperature indicator complete with sensing device & contacts 245 Oil temperature indicator with contacts & sensing device 246 Oil cooler pump with motor 247 Cooler fan with motor 248 Set of starter, contactor, relays and switch for electrical control panels (1 set of each type and range) 249 Buchholz relay complete with floats & contacts 250 (B)Circuit Breakers 251 220 KV 252 (One pole of circuit breaker with grading capacitor complete with pole column and interrupter with M.B. but without support structure and operating mechanism. 253 Rubber gaskets, ‘O’ rings and seals 254 Fixed Contacts 255 Moving Contacts 256 Terminal pads and connectors 257 Closing Assembly Valve 258 Trip Assembly Valve 259 Auxiliary Switch Assembly 260 Operation Counter 261 Closing Coils 262 Tripping coils 263 Support insulator complete for one pole of breaker 264 145 kV 265 One pole of circuit breakerwithout support structure and operating mechanism. 266 Rubber gaskets, ‘O’ rings and seals 267 Fixed Contacts 268 Moving Contacts 269 Terminal pads and connectors 270 Closing assembly valve 271 Trip assembly valve 272 Auxiliary switch assembly 273 Operation counter 274 Closing Coils 275 Tripping coils 276 Support insulator (set complete for one pole of breaker) 277 (C) Instrument Transformer 278 Spare of 245kVCapacitive Voltage Transformer 279 (i)Complete CVT 280 Spare of 245kVCurrent Transformer 281 (i)Complete CT [1 No. each type supplied) 282 Spare of 145kVCurrent Transformer 283 (i)Complete CT (1 No. each type supplied) 284 (D) C&R panels (similar items as used in the quoted panels) 285 Bay Control Unit (220 kV Side of offered type) 286 Bay Control Unit (132 kV Side of offered type) 287 Bay Unit (For 220 kV Busbar Protection of offered type) 288 Bay Protection Unit (Distance for 220 kV Feeders of offered type) 289 Bay Protection Unit (Line Distance cum Differential for 220 kV Feeders of offered type) 290 Bay Protection Unit (Distance for 132 kV Feeders of offered type) 291 Bay Protection Unit (Differential for 220 kV Transformers of offered type Main-I) 292 Bay Protection Unit (Differential for 220 kV Transformers of offered type-Main-II) 293 Self reset trip relay 294 Hand reset trip relay 295 Timer relay 296 DC supervision relays 297 Flag relays 298 Auxiliary relays 299 Multifunction Panel Meter 300 Fiber Optic Cable with Connectors 301 Transducers (Each Type used in the autoamtion system) 302 Ethernet Switch (of offered type) 303 (E) Surge Arrester 304 220kV class 198 kV rating LA complete as specified. 305 132kV class 120 kV rating LA complete as specified. 306 2 Nos. Terminal connector of each type as spare 307 (F) Battery & Battery Charger 308 220 V& 48 V Type Battery 309 Spare battery cell without electrolyte 310 Terminal connectors with bolts & Nuts 311 Float level indicators 312 Vent Plugs 313 220V/ 50V Battery Chargers 314 Set of Control Cards 315 Set of relays 316 Set of contactor 317 Micro-switches 318 Filter Capacitors 319 Thyristor/ Diode 320 Set of switches 321 Set of wound resistors 322 Potentiometers 323 Fuses of Thyristor with indicators 324 (G) LIGHTING SYSTEM 325 Single Pole MCB 326 Triple pole MCB 327 Fluorescent tube & Starter 328 a) Choke 329 b) Bottom Strips 330 c) Top covers & reflector (if applicable) 331 d) Holders 332 e) Complete fittings 333 Sodium vapour/Mercury vapour Lamps a) Lamp 334 b) Ballast 335 c) Condenser/ Igniter 336 d) Lamp holder 337 e) Lamp holder 338 f) Complete fittings 339 Incandescent lamp 340 a) Bulbs 341 b) Holders 342 c) Complete fittings 343 Switches and sockets 344 Junction box 345 Celing Fan 346 (H) Clamps & Connectors Set 347 (I) Fire Protection System 348 NIFPES System 349 Fitted Nitrogen Cylinder [48 Lit Water Capacity] 350 Hose Pipe with Fittings 351 Heat Sensor Assembly 352 Fire Survival Cable [sufficient for 1 system] 353 PNRV 354 Limit Switches for Fire Detector 355 Fire Detector (for NIFPES System) 356 Thermostat 357 Heating Element 358 (J) Isolators 359 220 kV 360 Solid core Insulator Stacks (Requirement of one Isolator) 361 Relays, power contactors, MCB’s switch fuses, push buttons and resistors, timers, key interlock for electrical control circuit as per approved schematic --- Each set containing one number of each type and rating as offered. 362 Limit switches & aux.switches--Each Set containing one no. of each type and rating as offered 363 Motor with gear assembly and bevel gear assembly. 364 Bearings (Requirement of one Isolator) 365 Current carrying assembly total (Requirement of one Isolator) 366 132 kV 367 Solid core Insulator Stacks (Requirement of one Isolator) 368 Relays, power contactors, MCB’s switch fuses, push buttons and resistors, timers, key interlock for electrical control circuit as per approved schematic --- Each set containing one number of each type and rating as offered. 369 Limit switches & aux.switches--Each Set containing one no. of each type and rating as offered 370 Motor with gear assembly and bevel gear assembly. 371 Bearings (Requirement of one Isolator) 372 Current carrying assembly total (Requirement of one Isolator) 373 Add: Any other supply item, if any, bidder may require completing the substation as per specification requirements.

BRR:7618561 Bids Are Invited For Business Intelligence And Data Analysis Software (V2) (Q2) Mse Total Quantity : 704

BRR:7631611 Management Of Non-Network Tanker With The Help Of Gprs System , Management Of Non-Network Tanker Including Installing The Gprs Instrument , Integrate The New System With Old , Installation & Maintenance Of Computer , Printer , Stationery & Latest Internet Service , Human Resources For Operating The System , Software For Operating The System , Prepare Of Tanker Card , Small Maintenance Of Gprs Instruments , Monitoring The Tanker Movement By Gprs System , Generations Of Reports As Per Requirement Maintain Hydrnat Register Etc .

BRR:7628792 Bids Are Invited For Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle Gandhinagar/ Ahmedabad to Local duty rates Swift Dzire Hire Charges per day Duty for 12 hrs / 120 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar / Ahmedabad to Local duty rates - Swift Dzire - Hire Charges per day Duty for 08 hrs/ 80 Km; Round Trip , Vehicle Hiring Service - Per Vehicle- Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle Gandhinagar/Ahmedabad to Local duty rates Swift Dzire Hire Charges per day Duty for 04 hrs / 40 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle Gandhinagar/Ahmedabad to Local duty rates Swift Dzire Extra Rate per Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - Swift Dzire - Additional Rate for running the vehicle per KM; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle- Gandhinagar/Ahmedabad to Local duty rates - EtiosorAccentorVernaorTigororany similar sedan - Hire Charges per day Duty for 12 hrs/120 Km; Round Tri.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle- Gandhinagar/Ahmedabad to Local duty rates - EtiosorAccentorVernaorTigororany similar sedan - Hire Charges per day Duty for 04 hrs/40 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - EtiosorAccentorVernaorTigororany similar sedan - Extra Rate per Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025 Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - EtiosorAccentorVernaorTigororany similar sedan - Extra rate for Hrs; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - EtiosorAccentorVernaorTigororany similar sedan - Additional Rate for running the vehicle per KM; Round T.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - Toyota Innova Crysta or any XUVs Car - Hire Charges per day Duty for 12 hrs/120 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle- Gandhinagar/Ahmedabad to Local duty rates - Toyota Innova Crysta or any XUVs Car - Hire Charges per day Duty for 08 hrs/80 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - Toyota Innova Crysta or any XUVs Car - Hire Charges per day Duty for 04 hrs/40 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - Toyota Innova Crysta or any XUVs Car - Extra Rate per Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - Toyota Innova Crysta or any XUVs Car - Extra rate for Hrs; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle- Gandhinagar/Ahmedabad to Local duty rates - Toyota Innova Crysta or any XUVs Car - Additional Rate for running the vehicle per KM; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Swift Dzire - Hire Charges per day Duty for 12 hrs/120 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Swift Dzire - Hire Charges per day Duty for 08 hrs/80 Km; Round Trip , Vehicle Hiring Service - Per Vehicle- Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Swift Dzire - Hire Charges per day Duty for 04 hrs/40 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle- Gandhinagar/Ahmedabad to Outstation Duty Rates - Swift Dzire - Extra Rate per Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Swift Dzire - Extra rate for Hrs; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle- Gandhinagar/Ahmedabad to Outstation Duty Rates - Swift Dzire - Additional Rate for running the vehicle per KM; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle- Gandhinagar/Ahmedabad to Outstation Duty Rates - EtiosorAccentorVernaorTigororany similar sedan - Hire Charges per day Duty for 12 hrs/120 Km; R.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - EtiosorAccentorVernaorTigororany similar sedan - Hire Charges per day Duty for 08 hrs/80 Km; Ro.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan 2023, 2024, 2025; Outstation; Plain; AC vehicle- Gandhinagar/Ahmedabad to Outstation Duty Rates - EtiosorAccentorVernaorTigororany similar sedan - Hire Charges per day Duty for 04 hrs/40 Km; Ro.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - EtiosorAccentorVernaorTigororany similar sedan - Extra Rate per Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle- Gandhinagar/Ahmedabad to Outstation Duty Rates - EtiosorAccentorVernaorTigororany similar sedan - Extra rate for Hrs; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - EtiosorAccentorVernaorTigororany similar sedan - Additional Rate for running the vehicle per KM.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Toyota Innova Crysta or any XUVs Car - Hire Charges per day Duty for 12 hrs/120 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle- Gandhinagar/Ahmedabad to Outstation Duty Rates - Toyota Innova Crysta or any XUVs Car - Hire Charges per day Duty for 04 hrsor40 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Toyota Innova Crysta or any XUVs Car - Extra Rate per Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Toyota Innova Crysta or any XUVs Car - Extra rate for Hrs; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Toyota Innova Crysta or any XUVs Car - Additional Rate for running the vehicle per KM ova Crysta.. , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-GNLU to Airport & Airport to GNLU - Swift Dzire; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-GNLU to Railway Station & Railway station to GNLU - Swift Dzire; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-GNLU to Airport & Airport to GNLU - EtiosorAccentorVernaorTigororany similar sedan; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-GNLU to Railway Station & Railway station to GNLU - EtiosorAccentorVernaorTigororany similar sedan; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-GNLU to Railway Station & Railway station to GNLU - Toyota Innova Crysta or any XUVs Car; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - Swift Dzire - Extra rate for Hrs; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain; AC vehicle-Gandhinagar/Ahmedabad to Local duty rates - EtiosorAccentorVernaorTigororany similar sedan - Hire Charges per day Duty for 08 hrs/80 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Outstation; Plain; AC vehicle-Gandhinagar/Ahmedabad to Outstation Duty Rates - Toyota Innova Crysta or any XUVs Car - Hire Charges per day Duty for 08 hrs/80 Km; Round Trip , Vehicle Hiring Service - Per Vehicle-Day basis - Sedan; 2023, 2024, 2025; Local; Plain 1. The Contractor shall provide a cost-effective, comfortable, safe, and secure transport system to GNLU. 2. The vehicle shall be petrol/diesel/CNG operated and shall be complied with Bharat Stage VI (BS VI)/ latest emission norms. and well equipped with air conditioning system, music system, luxurious interiors, neat and clean seat covers, air suspension, first aid box, air freshener spray, reverse camera & horn and all other accessories that are required to ensure comfort of employees of the owner. 3. The vehicle must be maintained by the Contractor in good and sound working condition, regularly serviced, daily cleaned & freshened with perfumed air freshener, maintained and equipped with all mandatory safety requirements and fittings. Seats shall be always covered with neat and clean seat covers, the vehicle shall have good quality foot mat and good quality music system required to ensure comfort of the 4. The Contractor must deploy vehicles and services that are energy efficient, less polluting, environment friendly and have eco-friendly waste disposal mechanisms. 5. The vehicle shall be equipped with the following specifications/ features:- a) Air Conditioning (AC) Inbuilt/ Company Fitted b) Tubeless Tyres and Tyre Retreading is strictly prohibited c) Neat and clean seat covers d) One set of Music system & speakers e) Provision of Mobile charger for Passengers f) Seat belt for every seat g) One set of rear-view cameras with display h) Fixing of a Fire extinguisher (1 KG in SUV) near driver compartment i) One no. of First Aid Box near driver compartment j) GPRS tracking system in the vehicle (Provided by Owner) k) Valid Fast Tag with adequate balance in Fast Tag l) Horn & Reverse Camera m) Retro reflective 50 mm tapes on Front face, both sides & rear face n) Vintage of Vehicle maximum ageing of vehicle shall be 3 Years as on date of deployment of vehicles at site i.e. 31.01.2025. 6. The vehicle deployed by the Contractor must be maintained in trouble-free working conditions during the contract period. If the vehicle goes breakdown, the contractor shall provide immediate replacement of an equivalent good quality vehicle without any additional cost to the owner. 7. No private vehicle shall be allowed for making the alternate arrangements. If the Contractor fails to make the alternate arrangement, then the GNLU reserves the right to make an alternate arrangement. The additional cost incurred by the owner towards making such alternate arrangement (at actual) alongwith applicable penalties shall be recovered from the Contractors monthly bills. 8. The vehicle shall be deployed on all calendar days of the month including Sundays and holidays during the contract period on 24 hours/ day basis as per the requirement raised by GNLU from time to time. Total Quantity :

BRR:7640959 Installation Of Children Play Equipment At Vidyasagar Colony Park, In Ward No -01, Under Kalyani Municipality- 1 MULTI PLAY STATION:Supplying, fitting and fixing of INO FRP Made Tube slide, FRP 6 mm- thickness INO FRP Made Wave slide, FRP 5 mm thicknessTotal Cover Area-15’x 13’ Iron part-2’.6” X 2’.6” inch Sq Bar, 3 X 1 Sq Hollo Tube, 1’ X 1’ Sq Hollo Tube 2’.6” thicknessMulti play with one Slide,one tunnel slide, one no shed, Platform height-4.5’, Structural parts made of MS hollow section (including cutting, fitting, welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26, 33 ,48,60,76,50x25mm, thickness of metal parts: max 3mm, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 2 PARK BENCH WITH CASTING HANDLE:Supplying, fitting and fixing of SIZE: Length –5’,Handle –C.I. casting ,Seat: wood or Hollow section or frp. Entire product is assembled with nut bolts. SEAT parts:75X25mm,50x25mm,.Color:multicolor ASPA finish paint on 2 coats of primer. 3 Seesaw Supplying, fitting and fixing of 4 Seat see-saw, 4 No. FRP Made seat, FRP 6 mm thicknessIron part-2’.6” X 2’.6” inch Sq Bar, Thickness 2’.6” mmCover Area-9’ X 5’, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 4 FRP GiraffeSupplying, fitting and fixing of FRP Giraffe Slide: Hight of Giraffe 8 Fit, Platform height 5’ slide lengh 10’ Structural parts made of GI pipe and MS hollow section (including cutting,fitting,welding,bolting and smoothing grinding etc. Completer) Entire product in assembled with nut bolts. Outer diameter of metal parts:60mm,48mm,42mm thickness of metal parts min2.9mm, ERP thickness: 4mm to 5mm, ERP DENSITY: 1600KG/M3. Color multicolor ASPA finish paint on 2 coats of primer. 5 Circular Swing Supplying, fitting and fixing of 4 seat circular swing, FRP Portion Thickness 5 mmIron part-2 inch Round pipe, 1 inch Round pipe, 2no Bearing, Iron thickness 2’.6” mm Cover Area-8’ X 8’,FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 6 ATOM SWING WITH 6 SEAT Supplying, fitting and fixing of hexagonal shape Height:8.5ft.,length-6’each side,The chain link 8mmand take the load of 80 kg(each). . Structural parts made M.S Hollow pipes (including cutting, fitting, welding, Bolting and smooth grinding etc. Outer Diameter of Metal Parts-60mm, Thickness of Metal Parts- min. 2.2mm-3.0 mm, FRP thickness: 6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer. 7 GST 18 % 8 CESS 1 %

BRR:7640947 Construction Of Cement Concrete Road From Kalimata Hardware Shop To Gurudwara More Andul Road, P.K.Roy Chowdhury Lane, Po-B.Garden, Howrah-711103 Under Ward No-39 (Beup)

BRR:7640914 Service Contract For Miscellaneous Maintenance Job Of Unit3 And Unit4 For Ahpmm Stageii For Four Months At Sgtpp Wbpdcl -- 1 Misc. Maintenance Job of AHP Unit#3 & 4 2 Replacement of Vacuum pump 3 Replacement of HP/LP/Eco pumps 4 Replacement/Overhauling of Blower(ESP Blowers & Silo Blowers) 5 Replacement of Ash slurry disposalpump/BAOTP Pump 6 Fabrication of platform 7 BA Feed gate actuator cylinder dismantling, cylinder seal kit checking if require replacement, gasket fitting and cylinder fitting, if require then cylinderreplacement. 8 BA Clinker grinder overhauling 9 Rotation of 250NB BA SlurryPipeline from BA Hopper area to ash slurry sump 10 Replacement of Collector tank cone => Limited

BRR:7640904 tender for Annual Maintenance For Repairing And Renovation Of Sahid Bandana Smriti Balika Abas, Cooch Behar For The Year 2025-26.- 1 Washing and cleaning with oxalic acid powder using 33gms./sq.m.b) Floor/ dado other than marble. 2 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992.(A) (i)Single Socketed 3 Meter Length110 mm 3 (B) Fittings x)Bend 87.5º110 mm 4 xi)Door Bend (T.S.)110 mm 5 xvi) Pipe Clip110 mm 6 Clearing compound premises of shurbs, plants, jungles etc. by cutting and removing as directed (Specific permission of Engineer-in-Charge prior to execution will be necessary).(Payment to be made on area cleared) 7 (II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. VarietyIn ground floor(a) 1:3:6 proportion 8 Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. 9 Plaster(towall, floor, ceilingetc.)with sand and cement mortarincluding rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excludingcost of chipping over concrete surface](i) With 1:4 cement mortar b) 20 mm thick plaster In FirstFloor 10 Supplying best Indian sheet glass panes setinputtyandfittedandfixed withnailsandputtycomplete. (Inall floorsforinternalwall&upto6 m height for external wall) (i) 3 mm thick (weighing 7.4 kg/Sq.m) 11 Applying Interior grade Acrylic Primer of approved quality and brand on plastered or concrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification andas per direction of the EIC. (a) One Coatii)Solvent based interior grade Acrylic Primer.In firstfloor 12 Applying Acrylic Emulsion Paint of approved make and brand on wallsand ceiling including sandpaperingin intermediate coats including putty(to be done under specific instruction of Superintending Engineer) :(Two coats)i) Standard Quality 13 Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: i) 75 mm. Dia. 14 (ii) 110 mm. Dia. 15 c) Bend 87.5 degree (i) 75 mm. Dia. 16 (ii) 110 mm. Dia. 17 Supplying, fitting&fixingZn-Alalloy(55%Al&45%Zn) coating of 150 grams per sq. metre (followed by colour coatedonbothside) steel sheetworkhavingminimumyield strengthof550Mpaof trapizoidalprofileofapprovedmake (excludingthesupportingframework) fittedandfixedwith 55mm&25mmself tappingscrew,EPDMWasher16mm dia&3mmth.washeretc. completewith150mmendlap andonecorrugationminimumsidelap.(Payment tobemade on area of finished work). (i) In Roof:-a) With 0.5 mm thick sheet 18 M.S. structural works with hollow sections (square or rectangularshape) conforming to IS: 806-1968 & IS:1161-1998) connected toone another with bracket, gusset, cleat as per design, drawing &direction of Engineer-in-Charge complete including cutting torequisite shape & size, fabrication including metal arc weldingconforming to IS: 816-1969 & IS: 9595 using electrodes of approvedmake and brand conforming to IS:814- 2004, haulage, hoisting anderection all complete.Payment to be made on the basis of calculated weight of structuralmemebrs of MS Holow Section as specified in relevent IS code infinished work. Payment for gusset, bracket, cleat may be made byadding the actual weight of such items with weight of finishedstructural members. The rates are considered for a hight of erection8 m. / 2nd floor level from the ground. Add 1.5 % extra over the ratefor each additional floor or 4m. beyond the initial 8 m. or partthereof.The rate includes the cost of all M.S. Hollow section, allconsumables such as electrodes, gas and hire charges of all toolsand plants and labour reqired for execution and all incidentalchages (such as electricity, labour insurance) etc. complete. i) For roof truss works a) Span up to 12 Mtr 19 Uprooting and removing plants from the surface of walls parapet etc and making good damages. (Repairing of damages to be paid separately).(a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. 20 Brick work with 1st class bricks in cement mortar (1:4) (b) In superstructure, ground floor. 21 Supplying, fitting&fixing1st qualityCeramic tiles inwalls and floors tomatchwith theexistingwork&4nos. of key stones (10mm) fixedwitharalditeat thebackof each tile& finishing the jointswithwhite cementmixedwithcolouring oxide if required to match the colour of tiles including rougheningof concrete surface, if necessaryorby syntheticadhesive & grout materials etc. (B) Wall (a) Area of each tile upto 0.09 Sq.m(ii) Other than Coloured decorative including white in First Floor 22 Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In Charge. (Payment will be made on finished length of the work).j) Fixed partitions. (Unsupported length of vertical member upto 1.5 mtr. Height of both ends of vertical member restrained but panels within 0.9 sq.m.)i) Top , bottom & side member. 23 ii) Intermediate member. 24 iii) Glazing clip. 25 k)Movable door shutter.i) Door frame. (Top & sides). 26 ii)Shutter : Top rail. 27 Bottom rail. 28 Lock rail 29 Door vertical. 30 Glazing cleap. 31 Providing and fixing exterior quality Aluminium Composite Panel(ACP)wall cladding on existing Al./MS frame work with GIbrackets, ACP fixedon the existing frame work by folding the edges of ACP panel (Engravingthe rear surface of ACP sheet) with CP angles, cleat sand strain less Steelscrewsforming grovesattheperiphery of ACP panel. Such grooves filled with foamand silicon sealant etc. complete with all materials (butincluding thecost of siliconsealant), labour, scaffoldingandall otherincidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Modeofpayment isonfinishedsurfacearea of ACP) (a) 3mm thick (0.25mm Al.+2.5mm LDPE +0.25mm Al. PVDF coating) 32 Supplying, fitting and fixing gunmetal wheel valve of approved brandandmake tested to 35 kg per sq. cm. (for gas line only). (iv) 50 mm dia 33 Removing chokage in G.I. pipe including cleaning pipe.v) 40 mm 34 vi)50 mm 35 Renewing P.V.C. clip with necessary screws.(i) 15 mm 36 iii) 25 mm 37 v) 40 mm 38 Dismantling and refixing bib cock or stop cock.(i) 15 mm 39 Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD -1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).(A) PVC Pipes15 mm 40 25 mm 41 40 mm 42 (B) Socket 15 mm 43 25 mm 44 40 mm 45 (C) Elbow 15 mm 46 25 mm 47 40 mm 48 (I) Union 15 mm 49 40 mm 50 E) Tee 15 mm 51 25 mm 52 40 mm 53 Cleaning and disinfecting upto 2000 litre Water Tank including masonry reservoir. 54 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible,with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 450 mm long 55 Supplying, fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps. (ii)750 mm long 56 Supplying, fitting and fixing low-down cistern parts.(i) Internal fittings for cistern complete of approved make. 57 ii) Outlet Assembly 58 (iv) Rubber Kid 59 Supplying, fitting and fixing yard gully with approved H.C.I. grating complete.(ii) 150 mm X 100 mm with 150 mm gratings 60 Supplying, fitting and fixing Orissa pattern water closet in white glazedvitreous chinaware of approved make in position complete excluding P orS trap (excluding cost of concrete for fixing).i) 580 mm X 440 mm 61 Supplying, fitting and fixing Squating plate with integral flushing in whitevitreous chinaware of approved make in cement concrete (6:3:1) withjhama chips complete. (Payment of concrete will be paid seperately).(i) 450 mm X 350 mm 62 Dismantling Orissa patternW.C. including takingoutof base concrete, ifnecessary, complete. 63 Refixing Orissa pattern W.C. Including cost of base concrete, if necessary, complete.Payment of concrete to be paid seperatly. 64 Removing sludge from septic tank, soak well etc. by methor labour includingdisposal of the same outside the compound as directed.(b) Upto 30 users:-(ii) Beyond a lead of 150 metre and outside the Municipal limit 65 Cleaning silt of inspection pit. 66 ADD GST @ 18.00% ON SUM OFAMOUNT Sl-01 to SL- 33. 67 ADD Cess @ 1.00% ON SUM OFAMOUNT Sl-01 to SL- 34.

BRR:7640704 Installation And Finalization Of Single Phase And Three Phase Check Meter In Etl, Rudrapur Under Etd Rudrapur.

BRR:7640630 Supply Of Acsr Panther Conductor And Accessories For 132Kv Baghjap-Ctps And 132Kv Baghjap-Hpc Transmission Line , Acsr Panther Conductor , 90 Kn Disc Insulator ( Tension) , 70 Kn Disc Insulator (Suspension) , Single Tension Hardware Fitting For Acsr Panther , Suspension Type Hardware Fitting For Acsr Panther , Supply Of Upg For Panther Conductor

BRR:7640278 Annual Rate Contract For Supply Of Electrical Items At Mamc Agroha , (Rate To Be Quoted As Per Make For Sr. No.01 To 117 Attached In The Dnit) Switch 6 Amp. 1 Way , Switch 6 Amp. 2 Way , Switch 15 Amp. 1 Way , 5 Pin 6 Amp. Multi Socket , 6 Pin 15 Amp. Multi Socket , Fan Regulator Step Type Switch Size , Modular Switch 10 Amp. 1 Way , Modular Switch 10 Amp. 2 Way , Modular Switch 16 Amp. 1 Way , Modular Socket 6 Amp. With Shutter , Modular Socket 16 Amp. With Shutter , Modular Fan Regulator Step Type Switch Size , Straight Batten Holder , 1.5 Sqmm Frls Pvc Unsheathed Copper Conductor Cable Single Core90 Mtr Roll , 2.5 Sqmm Frls Pvc Unsheathed Copper Conductor Cable Single Core90 Mtr Roll , 04 Sqmm Frls Pvc Unsheathed Copper Conductor Cable Single Core90 Mtr Roll , 6.0 Sqmm Frls Pvc Unsheathed Copper Conductor Cable Single Core 90 Mtr Roll , 10.0 Sqmm Pvc Unsheathed Copper Conductor Cable Single Core 100 Mtr Roll , 16.0 Sqmm Pvc Unsheathed Copper Conductor Cable Single Core 100 Mtr Roll , 25.0 Sqmm Pvc Unsheathed Copper Conductor Cable Single Core 100 Mtr Roll , 35.0 Sqmm Pvc Unsheathed Copper Conductor Cable Single Core 100 Mtr Roll , 50.0 Sqmm Pvc Unsheathed Copper Conductor Cable Single Core 100 Mtr Roll , Led U-Type Tube 18Watt 4 Pin , Flexible Wire (0.75Sqmm 2 Core Copper Conductor) 100 Mtr. Roll , Self-Adhesive Pvc Electrical Insulation Type , M.C.B 10 Amp. S.P. 10 Ka (Cat – C) , M.C.B 25 Amp. S.P. 10 Ka (Cat – C) , M.C.B 32 Amp. S.P. 10 Ka (Cat – C) , M.C.B 32 Amp. D.P. 10 Ka (Cat – C) , M.C.B 32 Amp.10 Ka Tp (Cat – C) , M.C.B 32 Amp.10 Ka Tpn (Cat – C) , M.C.B 63 Amp. T.P. 10 Ka (Cat – C) , M.C.B 63 Amp. Tpn10 Ka (Cat – C) , 2 Pin Top 6 Amp. Male Female , 3 Pin Top 6 Amp. , 3 Pin Top 16 Amp. , 70 Mm Aluminium Lugs Heavy Duty Crimping Type , 120 Mm Aluminium Lugs Heavy Duty Crimping Type , 150 Mm Aluminium Lugs Heavy Duty Crimping Type , 25 Mm Aluminium Lugs Heavy Duty Crimping Type , 35 Mm Aluminium Lugs Heavy Duty Crimping Type , 50 Mm Aluminium Lugs Heavy Duty Crimping Type , Telephone Pvc Wire Single Pair 0.5 Mm Conductor , Telephone Instrument Model No. M-53 , Pvc Wall Gitti 35 Mm Long , 4.0 Mm Pvc Gitti Clamp Type , 6.0 Mm Pvc Gitti Clamp Type , 10.0 Mm Pvc Gitti Clamp Type , 20 Mm Pvc Gitti Clamp Type , 25 Mm Pvc Gitti Clamp Type , Pvc Batten Gitti , Remote Control Door Bell , Bell Push Switch , Bed Switch , Mccb 100 Amp. 25 Ka 3 Pole With Enclosure , Mccb 100 Amp. 25 Ka 4 Pole With Enclosure , Mccb 160 Amp. 25 Ka 3 Pole With Enclosure , Mccb 200 Amp. 25 Ka 3 Phase 3 Pole With Enclosure , Mccb 315 Amp. 36 Ka 3 Phase 3 Pole With Enclosure , Mccb 400 Amp. 50 Ka 3 Phase 3 Pole With Enclosure , Capacitor 1.5 Mfd , Capacitor 2.5 Mfd , Capacitor 3.15 Mfd , Capacitor 4.0 Mfd , Capacitor 6.0 Mfd , Led Blub 15 Watt , Led Blub 20 Watt , Led Flood Light 60 Watt , Led Flood Light 100 Watt , Led Flood Light 200 Watt , Pvc Pipe 25Mm Dia 2Mm Thick (10 Feet Length) Havey Pipe , Pvc Bend 25Mm Dia , Ceiling Fan Rod 30” 15Mm Dia 2Mm Thickness , Ceiling Fan Rod 36” 15Mm Dia 2Mm Thickness , Ceiling Fan Rod 48” 15Mm Dia 2Mm Thickness , Ceiling Fan Clamp (Chidi) , Pvc Gang Box Power (1+1) , Pvc Gang Box 6 Amp. (1+1) , Pvc Gang Box 6 Amp. (2+2) , Pvc Gang Box 6 Amp. (2+1) , Pvc Batten Fati 0.75” , Fastener Ms 4” , Fastener Ms 5” , Fastener Ms 6” , Screw 35X8 Ms , Screw 50X10 Ms , Screw 60X10 Ms , Brass Screw 2” , Brass Screw 3” , Brass Screw 4” , Black Screw 1 Inch , Black Screw 1.5 Inch , Black Screw 2 Inch , Black Screw 3 Inch , Black Screw 4 Inch , Black Screw 5 Inch , Cooler Water Pump Rubber Pipe , 35Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 50Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 70Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 95Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 120Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 240Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 300Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 400Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Lt , 70Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Ht , 95Sqmm 3.5 C Straight Joint Kit Heat Srinkable Type Ht , Energy Meter Single Phase 10-60 Amp. Class-1 , Energy Meter Three Phase 10-60 Amp. Class-1 , Fly Killer Tube Rod 24” , Fly Killer Tube Rod 36” , Led Tube Light Set20 Watt 1200Mm Long , Pvc Fan Sheet Heavy , Gyser Element 2Kw (Triangular Base Type) , Cooler Regulator Three Step , Cooler Pump Switch , Cooler Water Pump

BRR:7640221 Dumper Vehicles Are Required To Hire Drivers Of 10 Cubic Meters And 15 Cubic Meters And Diesel For A Minimum Of 08 Hours Per Day.

BRR:7640218 Supply Of Isi Marked,Dlms Compliant,Lt Single Phase Whole Current Static Energy Meters (5-30A)With Optical Communication Port

BRR:7640120 Tender For Construction Of Vrb At Km 7.700 Of Hulwana Mr - Earth work in excavation of foundation in ordinary soili/c all lead & reqd lifts with proper compaction as per site requirement and proper disposel of excavated surplus earth as directed by engineer in chargeincluding cost of alllabour T&P etc. required for proper completion of work 2 Laying of cement concrete M10 A40 (1:3:6) with Cement, Coarse Sand, Stone Grit (A-40) laid in foundation of abutment including cost of all material, labour, T&P, Machanical Mixing, Curing etc complete or as directed Byfor proper completion of work Engineer-in-charge 3 Laying of Cement Concretein M7.5 A40 (1:4:8) mix with Cement, Coarse Sand, Stone Grit (A-40)including cost of all material, labour, T&P, Machanical Mixing, Curing etc complete for proper completion of work 4 Ist class Brick work in 1:4, Cement Coarse Sandmortar inwarpingincluding cost of allmaterial labour T&P etc. complete for proper completion of work 5 Struck Pointing in 1:2 Cement mortorincluding cost of all material, labour, T&P, Curing etc complete for proper completion of work 6 Providing centering & shuttering for bridge slab, bed block, dirt wallcement concrete work in foundation and transitions i/c all cost of labour & T&P etc complete for proper completion of work 7 Laying of reinforeced cement concrete in M20 A20 (1:1.5:2) mix with Cement, Coarse Sand, Stone Grit (A-20) in slab including cost of all material, labour, T&P, Machanical Mixing, Curing etc complete for proper completion of work 8 S/L of two coat tar Felt Painting including cost of all material, labour, T&P complete for proper completion of work 9 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) supply of all labour material and T&P required for proper completion of work. 10 Making cutting, bending, binding & placing in position ofsteel reinforcement with all wastage, carriage and including all labour material and T&P etc complete for proper completion of work 11 Dismantling of Brick / Stone work in cement masonry work including all labour material and T&P etc and disposalof dismantled material within a distance of 60 m. 12 Providing and fixing of 75 mm Dia P.V.C. Pipeincluding cost of all material, labour, T&P etc for proper completion of work 13 Supplying and fixing of 1000 mm inner Dia NP-3 socket Hume Pipeincluding placing in position with cost of all material, labour, T&P etc for proper completion of work 14 Providing and Fixing of year Plate for proper completion of work 15 Providing and fixing of B.M Plate for proper completion of work 16 Supply and Fixing wheel Guard stone (Size 150mmx150mmx1500mm)for proper completion of work 17 Providing & Filling 20 mm thick expansion joint with bitumen & Sand i/c all cost of material, labour T&P etc. for proper comp. of work. 18 E/w in filling for making diversion, strenthening of banks, making approaches of VRB in ordinary soil in layers i/c cost of all labours T& P with ramming drassing required lead up to 200 meter and lift up to 1.50 meter. The earth from cutting or removing of diversion, to be used in making embankment or to be deposited is spoil bank within 30m distence as per directed by Engineer-in-charge, including cost of all labour and T&P etc. complete 19 Providing and laying of RBM below 80 mm thick paved block as granular base for making approaches of VRB in ordinary soil with ramming drassing required, or as per directed by Engineer-in-charge, including cost of all labour and T&P etc. complete 20 Providing and Laying 80mm thick cement concrete interlocking mechanically comprased paved block over 50 mm thick ordinary sand laid as cusion after preparing hard base of 150 mm thick river bed material including cost of all material, labour and T&P etc. complete required for proper complition of work. 21 Earth work in cutting or removing of diversion in ordinary soil including lead up to 30 meter and lift up to 1.50 meter including cost of all labour and T&P etc. complete 22 Supply and Fixing Sign Boardfor proper completion of work

BRR:7640102 Supply, Delivery And Maintenance Of Robotics Hardware Kits For Implementation Of Coding And Robotics Education In Schools (Cares) Scheme In The State Of Goa.

BRR:7640062 supply of Essential Drugs, Consumable Items And Laboratory Kits, Essential Drugs,Consumable Items And Laboratory Kits, Chemicalsand Other Items , Lignocaine Hci I.P Inj.2% 30Ml Vial , Lignocaine Hydrochloride Ip With Dextrose Hyperbaric (Heavy) Inj 5%.2Ml , Lignocaine With Adrenaline Inj.30Ml Vial , Bupivacaine Heavy Mixed With Glucose Solution Inj.4Ml , Propofolinj 1% 20Ml , Propofol Inj 2% 10Ml , Isoflurane 100Ml , Midazolam Inj.1Mg/Ml,10Ml Vial , Ranitidine Hcl 25Mg Inj.2Ml Amp , Ranitidine Tab 150Mg , Sy. Antacid 170Ml , Omeprazole Cap 20 Mg , Pantoprazole 40Mg Inj/10Ml , Pantoprazole 40Mg Tab. , Ondansetron Inj I.P 2Ml , Ondansetron Syrup 30Ml , Zinc Sulphate Or Gluconatesyrup 50Ml , Cetrizine Hydrochloride 10Mg Tab , Cetrizine Syrup 30Ml , Chlorpheniramine Maleate 4Mg Tab , Paracetamol 500Mg Tab , Paracetamol Drops 150Mg/Ml 15 Ml Bottle , Sy. Paracetamol250 Mg/5 Ml 60 Ml , Inj. Diclofenac Sodium 25 Mg/Ml - 3 Ml Amp , Tab. Diclofenac Sodium50 Mg , Diclofenac Gel 30Gm Tube , Tab. Tramadol 50 Mg , Inj. Trammadol 50 Mg / Ml - 2 Ml Ampoule , Inj. Pentazocin Lactate 30 Mg/Ml - 1 Ml Ampoule , Trimethoprim + Sulphamethoxazole Susp.50Ml , Cap.Ampicillin Trihydrate 250 Mg , Cap.Ampicillin Trihydrate500 Mg , Sy. Ampicillin 125 Mg/ 5 Ml - Bottle Of60 Ml , Ampicillin Inj 500Mg Vial , Cap. Amoxycillin Trihydrate 250 Mg , Cap. Amoxycillin Trihydrate 500 Mg , Sy. Amoxycillin Trihydrate 125 Mg / 5 Ml- Bottle Of 60 Ml , Sy. Amoxicillin 200 Mg + Clavulinic Acid 28.5 Mg / 5 Ml Dry Syrup - Bottle Of 40 Ml , Tab. Amoxycillin I P 250 Mg + Clavulanic Acid I P 125Mg - Strip Of 10 Tablets , Tab. Amoxycillin I P 500 Mg + Clavulanic Acid I P 125 Mg - Strip Of 10 Tablets , Amoxycillin + Clavulanic Acid Inj 600Mg , Inj. Amoxycillin + Clavunic Acid 1.2Gm Inj. Amoxycillin Sodium 1000 Mg + Clavuanic Acid As Potasium Salt 200 Mg I.E.1.2 Gm(1.2 Gm) In Vial , Ceftriaxoneinj 500Mg , Ceftriaxoneinj 1000Mg , Ceftazidime Inj 500Mg , Cefotaxime Inj 500Mg , Cefotaxime Inj 1Gm , Meropenem Inj.1Gm , Meropenem Inj.500Mg , Cap. Doxycycline 100 Mg , Amikacin Inj 250Mg , Inj. Amikacine Sulphate 500 Mg - 2 Ml , Inj. Vancomycin 500 Mg, , Tab. Ciprofloxacin 250 Mg , Tab. Ciprofloxacin 500 Mg , Ciprofloxacin Inj 100Ml Bottle , Azithromycin Tab.250Mg , Azithromycin Tab.500Mg , Sy. Azithromycin 200 Mg Per 5 Ml 15Ml , Ofloxacin Tab 200Mg , Tab. Metronidazole 200 Mg , Tab. Metronidazole 400 Mg , Metronidazole Syp 200Mg/ 5Ml 60Ml , Inj. Cepoforazone+Salbactum1gm Inj. Cepoferazone Sodium 500 Mg + Sulbactum Sodium 500 Mg Uspi.E. 1Gm , Cefoperazone And Sulbactum For Inj.2Gm , Norfloxacin Tab.400Mg , Inj Piperacillin400gm+Tazobactam 0.5Gm , Tab. Flucanazole 150 Mg , Cap. Itraconazole 100 Mg , Tab. Griseofulvin 125 Mg , Inj Artesunate 60 Mg Im/I.V , Inj. Atropine Sulphate0.6 Mg/Ml - 1 Ml Amp , Heparin Sodium Inj. 1000 Iu/Ml , Inj. Heparin Sodium 5000 I U/Ml - 5 Ml Vial , Tab Losartan Potassium 25 Mg , Tab Losartan Potassium 50 Mg , Amlodepin Tab 2.5Mg , Amlodepin Tab 5Mg , Amlodepin Tab 10 Mg , Nifedipine Cap (Liquid) 5Mg , Labetalol Tab 100Mg , Inj. Labetalol Hcl 20 Mg , Atenelol Tab 25Mg , Atenelol Tab50 Mg , Inj. Frusemide - 2 Ml Each 1 Ml Contains 10 Mg Furosemide , Methyldopa Tab.250Mg , Dopamine Inj.5Ml , Inj. Nor Adrenaline 4 Mg In 2 Ml Ie. 2 Mg Per Ml , Tab. Atrovastatin 10 Mg , Tab. Atrovastatin 20 Mg , Tab. Gliclazide 80Mg , Tab Glibenclamide 5Mg + Metformin 500Mg , Tab. Glibenclamide 5 Mgaluminium Blister - Strip Of 10 Tab , Tab. Metformin 500 Mg , Tab Glimepiride 2Mg , Etofylline + Theophylline Inj , Tab. Etophyllin + Theophyillin Sr , Salbutamol Rotacaps Powder Puff , Aminophylline Inj , Cough Expectorant Diphenhydramine Hydrochloride 15 Mg (Ip) +Ammonium Chloride 150 Mg (Ip) + Sodium Citrate Ip - 60 Mg + Menthol -1 Mg (Ip , Tab. Phenytoin Sodium 100 Mg , Phenytoin Inj 50Mg/Ml 2Ml , Sodium Valporate Tab 200 Mg , Clobazamtab10 Mg , Carbamezapine Tab100 Mg , Carbamezapine Tab 200 Mg , Cabergoline Tab 0.5 Mg , Trihexyphenidyl Hydrochloride Tab 2 Mg , Clopidogrel Tab 75 Mg , Low Molecular Weight Heparin (Enoxaparin) 0.4 Iu Pfs , Tranexemic Acid Inj 500 Mg , Sodium Bicarbonate Inj. 7.5 Mg/Ml , Ethamsylate Inj125 Mg/Ml – I.E250 Mg In2 Ml Ampoule , Antisnake Venom Serum Strerile Powder With Strerile Water, Lyophilized Sterile Solution 10Ml , Rabies Immunoglobin - Anti Rabies Serum 150 I U Per Ml - I.E. 300 Mg Per 2 Ml Vial ( Humman Rabbies Immunoglobulin) , Inj Anti Rabies Serum 300Iu(Ars) (Rabbies Antiserum ) , Antiscorpion Venum Serum Inj , Anti Rabies Vaccine Id /Im (Human Tissue Culture) , Anti Rabies Vaccine Im(Human Tissue Culture) , Anti Rabies Vaccine Id (Human Tissue Culture) , Hydroxyethyl Starch (Hetastarch) Inj 6% 500Ml , Lactulose Syrup100 Ml , Liquid Paraffin Bottle 500Ml , Carbimazole Tab 5Mg , Erythropoetin Recombinant Inj 2000Iu , Erythropoetin Recombinant Inj 4000Iu , Erythropoetin Recombinant Inj 10000Iu , Inj Inj. Iron Sucrose 50 Mg In 2.5Ml Ampoule , Anti-D Immunoglobulin 300 Iu Inj Mono/Polyclonal , Inj Magnesium Sulphate 50% W/V 2Ml , Oxytocin Inj 5Iu 1Ml Amp , Inj Carboprost Tromethamine 250Mcg/Ml - 1 Ml Carboprost Inj 1Ml , Hydrocortisone Sodium Succinate Inj.100Mg , Dexamethasone Inj. 2Ml , Sodium Chloride - Normal Saline 0.9% Inj. I.V 500Ml , Sodium Chloride - Normal Saline 0.9% Inj. I.V 100Ml , Dextrose Inj I.V 500Ml , Dextrose 5% With Normal Saline 0.9% Inj I.V 500Ml , Ringer Lactate Inj. I.V 500Ml , Multiple Electrolytes & Dextrose Injection Type Iiiip For Maintenance , Misoprostol Tab 200Mcg , Metronidazole I.V Inj. 100Ml , Multiple Electrolytes & Dextrose Injection Type Iipfor Pediatric Use 500Ml , I.V. Mannitol Inj. I.V 100Ml , Water For Injection 5Ml , Water For Injection 10Ml , Gluteraldehyde Solution With Activator 5Liter , Hydrogen Peroxide Ip 500Ml , Surgical Spirit B.P.500Ml , Calcium Carbonate Tab + Vit D3 , Syrup Calcuim With Phosphate200ml , B Complex Injection 10Ml , Vitamin B Complex Tablets N.F.I. , I.V. Amino Acid 100 Ml , Ascorbic Acid (Vitamin C)500Mg , Oint. Povidone Iodine 5%W/W 15 Gm , Povidone-Iodine 5% W/V Solution , Povidone Iodine 7.5% W/Vtopical Solutionscrub 500 Ml , Clotrimazole Cream : Cream Clortimazole 1% W/W- 15 Gm , Clotrimazole Lotion 1% V/V - 15 Ml , Clotrimazole Mouth Paint1% W/V - 15 Ml , Clotrimazole Dusting Powder 1% W/W - 30 Gm , Miconazole Cream: Miconazole Nitrate 2% W/W 15 Gm , Cream Permethrine: Cream Permenthrine 5% W/W 30 Gm , Fusidic Acid 2% W/W - 10 Gm (Fusidic Acid 20Mg Per Gm) , Turpentine Oil Jar Of 0.5 Ltrs , Oint. Framycetin Skin 1 % W/W100 Gm , Oint. Framycetin Skin 1 % W/W30 Gm , Fluconazole 0.5% W/V - 15 Gm , Silversulphadiazine Cream : Cream Sivlersulphadiazine 1% W/W 15Gm Tube , Silversulphadiazine Cream : Cream Sivlersulphadiazine 1% W/W 250 Gm , Benzyl Benzoate Application 25 % W/W 100 Ml , Calamine 8% W/V, Diphenhydramine Hcl 1% W/V, Camphor 0.1% W/V, Specially Denatured Spirit 2.37% V/V , Gammabenzene Hexachloride 1% W/V , Benzoic Acid 6% W/W+ Salicylic Acid 3 % W/W Ointment - Tube Of 50 Gm , Fluocinolone Acetonide Topical Ointment 0.025% Ointment - 15 Gm , Betamethasone Dipropionate 0.05% W/W - 15 Gm , Oint/Cream Clobetasol Propionate 0.05% W/W , Glycerin 500 Mlglass Bottle , Ciprofloxacin 0.3% W/Veye Drop (5Ml.Vial) , Ciprofloxacin 0.3% W/V Dexamethasone 0.1% W/V E/D (5Ml.Vial) , Inj. Pralidoxime Chloride 500 Mg/ 20 Ml , Inj. Pralidoxime Chloride 1G/ 20 Ml , Inj. Acetylcysteine-200 Mg In 2 Ml , Tab. Dicyclomine 10 Mg , Inj. Dicyclomine 10 Mg / Ml - 2 Ml , Tab. Clonezepam 0.5 Mg , Tab. Clonezepam 2 Mg , Tab. Amitryptillin Hydrochloride 25 Mg Fc , Dinoprostone 0.5Mg Gel , Sitagliptine 100 Mg Tab , Acetyl Salicylic Acid Tab. 75Mg I.P , Acetyl Salicylic Acid Tab. 150Mg I.P , Escitalopram Tab. 10Mg , Divalproex Sodium Tab 500 Mg , Fluoxetine Cap 20Mg. , Imipramine Tab 25Mg , Mirtazapine Tab 15Mg , Sertraline Tab 50Mg , Lithium Carbonate Tab 300 Mg. , Lamotrigine Tab 50 Mg. , Tab. Sertraline 50Mg , Inj. Haloperidol 5 Mg/Ml - 1 Ml , Tab. Haloperidol 1.5 Mg , Tab. Haloperidol 5 Mg , Tab. Olanzapine 5 Mg , Tab. Olanzapine 10 Mg , Tab. Clozapine 50Mg , Tab. Resperidone 2 Mg , Tab. Trifluperazine Hcl 5 Mg +Trihexyphenidyl Hcl2 Mg , Tab. Quetiapine 100 Mg , Potasium Permagnet Crystals500 Gm , Tab. Trypsin + Chemotrypsine C1,00.000 I.U Aluminium Blister Of 10 Tablets , Inj. Nitroglycerine 5 Ml Each Mlto Contain : Nitroglycerine Trinitrate 5 Mg , Formaldehyde500 Ml , Benzylkonium Chloride 50% W/V . - 500 Ml , Antiseptic Solution Containing = Cetrimide 3% W/V Chlorohexidine 1.5% W/V = 5 Ltr Jar , Dichlorometxynol 1.88% + Terpineol 2% ( Soap Solution Base) 5 Ltr Jar , Sodium Hypochlorite Sol. Contains Not Less Than 4% And Not More Than 6% Sodium Hypochlorite. , Sodium Hypochlorite Sol. Contains Not Less Than 4% And Not More Than 6% Sodium Hypochlorite. , Inj Hepatitis B Immunoglobulin Human 100 Iu/0.5Ml , Inj Hepatitis B Immunoglobulin Human 200 Iu/0.5Ml , Linezolidtab 600Mg. , Linezolidinj 100 Mg/100 Ml , Inj. Livipril5ml , Inj L Ornithine,L Asparate 5Gm /10Ml Like( Hepamerz) , Protein Tonic With Iron,Vitamin&Minerals 200Ml , Multivitamin Syrup With Mineral Supplements 200Ml Bottle , Immunity Boosting Suppliment(For Diabetic Person) , Immunity Boosting Supplement(For Non- Diabetic Person) , Syr Multivitamin 200Ml , Inj Ivig , Inj Albumin 100Ml , Inj Piperacillin 400Gm Vials , Oral Rehydration Powder 20.5Gm , I.V. Paracetamol 100Ml , Hand Rub Sanitizer 500Ml(Antiseptic Solution) , Hand Rub Sanitizer 100Ml(Antiseptic Solution) , Inj. Tetanus Toxide 0.5 Ml (Adsorabed) , Albendazole Tab 400Mg , Albendazole Susp. 200Mg/5Ml, 10Ml Bottle , Inj. Drotravarine , Calcium Gluconate Inj. 100Mg/Ml , Inj Traxemenic Acid , Ferrous Fumarate Syrup100 Ml Bottle , Iron + Folic Acid Tab (100 Mg Of Elemental Iron + Folic Acid I P 0.5 Mg) , Iron + Folic Acid Tab (30 Mg Of Elemental Iron + Folic Acid 250Mcg) , Ferrous Fumarate Tab 210 Mg , Tab. Ifa Containing 45 Mg Elemetal Iron & 400 Mcg Folic Acid , Iron Folic Acid Liquid 200Ml , Iron Folic Acid Liquid 15Ml (Paediatric) , Ifa Syrup With Auto Dispenser 50 Ml Bottle , Folic Acid Tab 5Mg , Tab. Ifa Containing 45 Mg Elemetal Iron & 400 Mcg Folic Acid , Tab. Telmisartan 20Mg , Tab. Telmisartan 40Mg , Capsule Oseltamivir 30Mg , Capsule Oseltamivir 45Mg , Capsule Oseltamivir 75Mg , Syp. Oseltamivir 75Ml Bottle , Tab. Telmisartan 80Mg , Adhesive Plaster (Zinc Oxide ) 7.5 Cm X 5 Mtr- Cotton Basedroll Of 7.5 Cm X 5 Mtr , Adhesive Plaster (Zinc Oxide ) 10 Cm X 5 Mtr - Cotton Basedroll Of 10 Cm X 5 Mtr , Adhesive Tape - Paper Based Hypoallergenic Microscopically Porous1X 5 Mtr , Adhesive Tape - Paper Based Hypoallergenic Microscopically Porous 2X 5 Mtr , Elastic Adhesive Bandage (With 20% Zinc Oxide) With Adhesive Masss Weight 10 Cmx4mtr , Elastic Adhesive Bandage (With 20% Zinc Oxide) With Adhesive Masss Weight 6 Cmx4mtr , Bandage Cloth As Per Schedule Fii 100 Cm X 20 Mtr , Absorbent Surgical Gauze F Iidrug And Cosmectic Act 1940 (50Cmx18 M) In Than , Bivalve Connection - Plastic ( 3 Way) , Rubber Makintosh Double Colour 110Cm Mtr , Rubber Makintosh Double Colour 90Cm Mtr , Sterile Disposable Surgical Gloves No 6 Powder Free Gloves , Sterile Disposable Surgical Gloves No 6.5,Powder Free Gloves , Sterile Disposable Surgical Gloves No 7Powder Free Gloves , Sterile Disposable Surgical Gloves No 7.5 Powder Free Gloves. , Rubber Gloves 6 Operation Gloves (Non-Sterilised) 6 Pre-Powdered , • Rubber Gloves 6.5 Operation Gloves (Non-Sterilised) 6.5 Pre-Powdered , Rubber Gloves 7 Operation Gloves (Non-Sterilised)7 Pre-Powdered, , • Rubber Gloves 7.5 • Operation Gloves (Non-Sterilised) 7.5, Pre-Powdered , Disposable Umbilical Cord Clamp , Sterile Pvc Latex Free Tube For Suction.Reusable , Disposable Negative Suction Drain Set No.10, 12 G , Triple Layer Face Mask , Hiv Kits Disposable (Aidskit) , Plastic Apron , Ryles Tube Polythene(P.V.C) Pre-Sterile Sizes 7,8,12,14 , Disposable Non Traumatic Razors , Disposable Sterile Spinal Needle Size: 23 G , Disposable Sterile Spinal Needle Size: 24 G , Disposable Sterile Spinal Needle Size: 25 G , Disposable Sterile Spinal Needle Size: 26 G , Disposable Syringes 2Ml With Needle 21G-24G X 1 Inch , , Disposable Syringes 5Ml With Needle 21G-24G X 1 Inch , Disposable Syringes 10 Ml With Needle 21G X 1½ Or 22G X 1¼ Inch , Endotracheal Tube Cuff- Pvc & Rubber 2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5,10,10.5,11 , Endotracheal Tube Plain - Pvc & Rubber Sizes 2.5,3,3.5,4,4.5,5,5.5,6,6.5,7,7.5,8,8.5,9,9.5,10,10.5,11 , Disposable Cap , Disposable Delivery Kit - , B Tset (Blood Transfusion Set) , Disposable Sterile Needle No. 211 To 1.5 , Disposable Sterile Needle No. 22 1 To 1.5 , Disposable Sterile Needle No. 23 1 To 1.5 , Disposable Sterile Needle No. 241 To 1.5 , Disposable Sterile Needle No. 251 To 1.5 , Disposable Sterile Needle No. 261 To 1.5 , Chromic Catgut With Needle 3/8 Circle Round Body40mm.Size 1 Length 76 Cm , Chromic Catgut With Needle 3/8 Circle Round Body40mm.Size 1/0 Length 76 Cm , Chromic Catgut With Needle 3/8Circle Round Body Heavy Needle 40Mm. Size 1/0 Length 100 Cm , Chromic Catgut With Needle 3/8Circle Round Body 30Mm. Size 2-0, 76Cm , Chromic Catgut With Needle 1/2 Circle Round Body 45 Mm.Size 2 Length 76 Cm Heavy , Chromic Catgut With Needle 1/2Circle Round Body 20Mm. Size 3-0, 76Cm , Synthetic Polyglycolic Acid With Needle ½ Circle Round Body 40Mm. Size 1 , Length 90 Cm , Synthetic Polyglycolic Acid With Needle ½ Circle Round Body40mm. Size 1/0 , Length 90 Cm , Synthetic Polyglycolic Acid With Needle 1/2 Circle Round Body 20 Mm Size 3-0 Length 76 Cm. , Syntheticpolyglactin Acid With Needle ½ Circle Round Body 40 Mm. Size 1 , Length 90 Cm , Absorbable Surgical Suture U.S.P. Suture Length 90 Cm, 1 Round Bodied , Absorbable Surgical Suture U.S.P. Suture Length 90 Cm, 1.0 Round Bodied , Absorbable Surgical Suture U.S.P. Suture Length 90 Cm, 2.0 Round Bodied , Absorbable Surgical Suture U.S.P. Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm ,1 , Absorbable Surgical Suture U.S.P. 1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm, 1 , Absorbable Surgical Suture U.S.P1/2 Circle Ct Round Bodied 40Mm, Gs Needle, Suture Length 90 Cm, 1-0 , Absorbable Surgical Suture U.S.P. 1/2 Circle Round Bodied 30Mm, Suture Length 90 Cm,2-0 , Absorbable Surgical Suture U.S.P1/2 Circle Reverse Cutting,Os 40Mm, Suture Length 90 Cm ,1 , Black Braided Silk2-0 With Needle , Black Braided Silk3-0 With Needle , Nylonmonofilament Nonabsorbable Needle (Loop Suture) 40 Mm Size1/0 Length150 Cm , Nylon Monofilament Nonabsorbable Circle Needle Reverse Cutting 50Mm Size 2-0 Lenth 76 Cm , Polypropylene Suture ½ Circle Round Body.Size 1/0 , Length 90 Cm , Polypropylene Suture½ Circle Round Body30mm.Size 1/0 , Length 90 Cm , Polypropylenesuture 3/8 Circlecutting Needle 30 Mm 70Cm. Size 2-0 , Dental X-Ray Films , All Purpose Sonography Jelly 250Gm , Ecg Jelly Tube 200Gm , Acid Concentrates For Hemodialysis 5Liter , Haemodialysis Fluid –10Liter , A.V. Fistula Needles Size: 15G, 16G, 17G , Hemodialysis Blood Tubing Set , F6 Dialyser , F8 Dialyser , F5 Dialyser , Citric Acid 1-Hydrate, Lactic Acid, Malic Acid, Adjuvants. Ph Value 1.7 To 2.0 , Soft Plastic Nasal Airways , Wax Coated Electro Cardi Graphic Paper Size 50 Mm X 30Mm Or 60Mmx20mm (Superior Quality) , Wax Coated Electro Cardi Graphic Paper Size 80 Mm X 20Mm Or 60Mmx20mm (Superior Quality) , Wax Coated Electro Cardi Graphic Paper Size 10 Cm X 20Mm Or 60Mmx20mm (Superior Quality) , Autoclave Indicatortape , Elastic Crape Bandage 10 Cm X 2.5 Mtr , Elastic Crape Bandage 15 Cm X 2.5 Mtr , Folleys Urinary Catheter (3 Way) , Folleys Catheter No. 6 ,(2Way) , Folleys Catheterno. 8 ,(2Way) , Folleys Catheterno. 12,(2Way) , Folleys Catheterno. 14 ,(2Way) , Folleys Catheterno. 16,(2Way) , Folleys Catheterno. 18,(2Way) , I.V.Cannula 18 G , I.V.Cannula 20 G , I.V.Cannula 22 G , I.V.Cannula 24 G , I.V.Cannula 26 G , I.V. Cannula With Integrated 3 Way Stop Cock.No. 18G , I.V. Cannula With Integrated 3 Way Stop Cock. No. 20G , I.V. Cannula With Integrated 3 Way Stop Cock. No. 22G , I.V. Cannula With Integrated 3 Way Stop Cock. No. 24G , Folleys Catheterno. 10 ,(2Way) , I.V.Sets With Hypodermic Needle 21 G Of 1.5 Inch Length , Intercostal Draining System With Trocar And Bag , Microdrip I.V. Sets With Volumetric Chamber , Oxygen Tube With Nasal Prongs , Plaster Of Parisbandages 10 Cm X 2.7 M (Ready Made) , Plaster Of Parisbandages 20 Cm X 2.7 M (Ready Made) , Plaster Of Parisbandages 15 Cm X 2.7 M (Ready Made) , Rolled Cotton Bandage As Per Schedule F-Ii10 Cm X 4 Mtr , Rolled Cotton Bandage As Per Schedule F-Ii15 Cm X 4 Mtr , Rolled Cotton Bandage As Per Schedule F-Ii 7.5 Cm X 4 Mtr , Soft Cotton Roll 50Gm , Absorbent Cotton Wool 100Gm , Absorbent Cotton Wool500gm , Urine Collection Bag , Biodigrable Bio Medical Wastage Bags Colour Yellow/White/Black/Blue/Red(27” X 33”/Variable Size) , Albumin Kit (Auto) Kit , Alkaline Phosphates (Manual Kit) , Bilirubin Kit (T&D)Kite (Auto) , Bilirubin Kit (Manual) , Cholesterol (Manual) Wybenga Method , Hdl Cholesterol Kit(Inclusive Of Total & Hdl Cholesterol Manual) , Total Cholesterol Auto Kit , Creatinine Kit (Manual) , Gluco-Stix For Urine Sugar Reagent Covered/ Protected With Nylon Mesh , Glucose Kit (God/Pod ) Auto/Manual , Ketostix (For Sugar & Ketone In Urine) , Malaria Staining Kit , Sgot (Manual Kit ) Dnph , Sgpt (Manual Kit) Dnph , Urea (Dam Method ) Kit (Manual) , Urea Auto Kit (Gldh/Kinetic) , Uric Acid (Manual) (Uricase Enzymatic Colorimetric ) , Urine Strips For Albumin & Sugar Reagent Covered /Protected With Nylon Mesh , Urine Strips For Sugar Albumin, Ph ,Ketone &Blood Reagent Covered/ Protected With Nylon Mesh , Vdrl Test Kit Carbon , Widal (Slide Test) , Triglyceride Kit (Manual) Enzymatic (Gpo-Pap)(4*100) , Triglyceride Kit (Auto)(4*100) , Hbsaglatex Aggleutination Test , Hbs Ag Spot Test Kit , Hbs Ag Elisa Test Kit 96 Test , Anti Abd Kit , Vaccum Tube Edta With Adaptor & Needle 3Ml , Vaccum Tube Plain 4 Ml , Starile Evacuated Fluoride & Edtatube 3Ml , Starile Evacuated Sodium Citrate Tube 3.8% 3Ml , A Vacutainer Blood Collection Tube Is A Sterile Glass Or Plastic Tube With A Closure That Is Evacuated To Create A Vacuum Inside The Tube Facilitating The Draw Of A Predetermined Volume Of Liquid. Most Commonly Used To Draw A Blood Sample Directly From The Vein, These Also Are Used To Collect Urine Samples. , Test Tube Disposible With Cap , Test Tube Disposible Without Cap , Big Yellow Tips , Small Yellowtips , Cholesterol – God- Pod Kit (Kinetic / Enzymatic) , Hdl Cholesterol Direct Homogenous M , Ldl –Cholesterol Direct Homogenous M , Liquid Hand Wash Containgnon Lonic Surfactant (Akyl Sodium Benzene Sulfonate) 10% Buffered Ph7 (+)1) With) Fragrance And Colourq.S. , Field Stain A , Field Stain B , Hydrochloric Acid- Ar Grade N/10 , Edta Solution , Laboratory Cleaning Solution For Glass Plastic Floors Or Other Laboratory Utensilscontaning : Non Lonic Surfactant (Akylsodium Benzene Sulfonate ) 12% Buffered Ph 7 ( + ) , Micro Slides Size -75 Mm, Long 25 Mm (In The Packet Of 50 Slides) , Dengue Spot Test Kit (Rapid) Ns1 ( Igg + Igm) , Dengue Eliza Test Kit 96 Test , Malaria Rapid Test Kit (Antigen Based) , Hiv Rapid Test Kit , Hcv Rapid Test Kit , Micropipettes 20 To 200 Ul, 10 - 100 Ul, 50 - 100 Ul , Blood Group Sera A 10 Ml , Blood Group Sera B10 Ml , Blood Group Sera D 10 Ml , Leptospirasis Test Kit (Spot Method) , Fully Automatic Analyser Kits , Albumin Kit 10 X 44 Ml , Bilurubin Kit Total , Bilurubin Direct 6 X 44 Ml , Cholesterol Kit , Sgot Kit , Sgpt Kit , Urea Kit , Creatinine Kit , Crp Kit , Glucose Kit , Erbanorm Kit , Erbamultical Kit , Erba Xl Wash 4 X 100 Ml , Aso Test Kit , Alkaline Phosphates , Deionised Water , Semi Automatic Analyser Kits , Bilurubin Kit Total , Cholesterol Kit , Sgot Kit , Sgpt Kit , Urea Kit , Creatinine Kit , Crp Kit , Glucose Kit , Aso Test Kit , Excel Wash Kit , R A Factor , Path Kit , Triglucoride Kit , Pregeancy Test Kit (Rapid) , Lancet Ncd (Sterile Single Use Lancing Devicet-Type) , Lancet Neonatal , Lancet Ncd (Sterile Single Use Lancing Deviceround Type) , Glucometeriso Mark+ Glucomstrips , Alkaline Phosphates , Abxminidil10 Ltr , Abx Lysbio 400 Ml , Abx Cleaner 500 Ml , Abx Mintrol 2.5 Ml , Abs Minitral Solution 5Ml , Dilucel Plus , Lysel Plus , Rincel Plus , Washing Solution For Automatic Cell Counter Model Midray Bc 302 , Diluent 5 Ltr , Rinse 5 Ltr , Lyse 500 Ml , E-Z Cleanser 50 , Prbob Cleaner 50 Ml , Thermal Paper Roll For Printing , Adgelectrolyte Pack Ise , Adg Diluent 20 Ltr , Agd Lyse 500 Ml , Adg Soak Solution , Abg Cartriage Eg7 , Abg Ccg4 Cartriage

BRR:7639900 Special Repair To Ci Di Gi Water Supply Pipe Line From Oht 11 To Abdul Hameed Lines And Other Connected Areas Under Ge Utility Ambala Cantt

BRR:7639892 Provision Of Ct Pt And Ct Operated Meter In Trv And Technical Area At Icgas Daman

BRR:7639887 Certain Misc Br Repair Maint In Water Supply And Sewage Installation At Sector B Under Ge Utility Ambala

BRR:7639886 Comprehensive Repair Maint And Attending Day To Day Complaints Of External Water Supply At Sector C1 And C2 Under Ge Utility Ambala

BRR:7639817 Bids Are Invited For Custom Bid for Services - Measurement of Tower Footing Impedance of Towers in various transmission lines under POWERGRID Odisha Projects System Integration Service to Implement IoT Sensor- Based Measurement and Monitoring of Rural Water Supply Systems Total Quantity :

BRR:7639621 Overhauling Of Boiler Pressure Parts Of 250 Mw Thermal Power Plant Of Unit8-1. Supply &Fitting of scaffolding at Furnace zone, PLSH By Couplok scaffolding. 2. Scaffolding of FSH, RH, LTSH & Economizer. 3. Cleaning of furnace (Boiler first pass), PLSH, FSH RH zone by HP water jet. 4. Cleaning of LTSH, Economiser, Pent house including roof, roof top, inside pent house accumulated ash, Dog House, Dead chamber, all Boiler area Buck stay including duct area inside & outside. 5. Boiler External cleaning from pent house elevation to zero meters by air & fire water. (Upto Coal Feeder Building including fans duct,ccp APH) 6. Arrangement & Assistance for Furnace Gas tightness test. 7. Hanger & Supports checking of critical pipings including air and flue gas duct area up to ID Fan (excluding ESP) & Boiler Buck stay checking. 8. DE metering of pressure parts ,Area to be covered: Furnace tubes at soot blower, burner mouth area gooseneck area, LTSH, Economiser, Steam cool wall, manhole areas, FSH, RH,Screen tubes etc. 9. a) Removal, fabrication & fitting of guard tube for Screen tube,scw, LTSH, Economiser, furnace wall. b) Removal, fabrication & fitting Cassette baffle for, LTSH, Economiser 10 Lifting & refitting of LTSH coil including terminal joints, and hanger tube joint. 11. DP test of stub joints 12 Insert in furnace wall tube.(including radiography) 13 Insert in LTSH ,Economiser,SCW tube. (including radiography) 14 Insert in FSH, PLSH, RH tube(including radiography) 15 Insert in screen tube (including radiography) 16 Deposition of weld metal on Boiler tubes, stubs, doors, headers etc. 17 Radiography of erection welding joints (single shot) 18 Skin casing welding. 19 Servicing for safety valves & Trevi test and actual popping of Drum-3, SH-2,RH-5 safety valves 20 Safety valve seat cutting 21 Servicing of soot blower safety valve. 22 Lifting & refitting of ECO coil including terminal joints 23 Stress relieving for pressure parts welding joint. 24 Roof loose tube proper clamping. 25 Fabrication of different size cold bends. 26 Economiser header stub joint replacement. 27 LTSH inlet header stub joint replacement. 28 Overhauling of Boiler Drum and drum internals. 29 Fins welding 30 Pressure parts area Miscellaneous job. 31 LTSH coil replacement. 32 Boiler Inspector Sundry expenses (other than fees) 33 MAGNETIC PARTICLE TEST (MPT) 34 Servicing of Man holes of boiler 35 Servicing of Peep holes of boiler 36 Hiring of reciprocating pump for departmental & inspector hydro test at 250kg/cm2 (B) INSPECTION & REPAIR OF PENT HOUSE, DEAD CHAMBER & DOG HOUSE: Inspection & Repair of pent house, dead chamber & house. LS 1 (C1) HIGH PRESSURE VALVE SERVICING: Overhauling of HP valve size above 25 mm & up to (class 2500 & 3000) Nos 20 Overhauling of HP valve size above 50 mm & up to mm (class 2500 & 3000) Nos 15 Overhauling of HP valve size above 100 mm & up to mm (class 2500 & 3000) Nos 2 Overhauling of HP valve size above 200 mm (class 3000) Nos 2 Overhauling of pneumatic operated Spray control Nos 19 Overhauling of Manual Operated spray control valve Nos 22 (C2) HP VALVE ACTUATOR CLEANING,GREASING & TIT-BIT MAINTENANCE: Servicing of Valve Actuator, size up to 50mm No 6 Servicing of Valve Actuator, size above 50mm &upto mm No 8 Servicing of Valve Actuator, size above 200mm &upto mm No 4 (D)REFRACTORY: Removal re-application of refractory MT 20 (F) BURNER SYSTEM (COAL & OIL BURNERS, WIND BOX, SADC, BURNER TILT WORK,BURNER ISOLATING GATE) 1 Coal Burner Servicing/Replacement Nos 24 2 Oil Burner servicing/ replacement Nos 16 2 SADC, Burner tilt Servicing & Wind box repairing. LS 1 3 Burner Isolating gate servicing NO 24

BRR:7639619 Re E-Tender For Procurement Of Consumable Items For Two Years From The Date Of Award Of Contract (Aoc) , Adhesive (Copolymer) Based Silk Tape, Non-Elastic Tape With Strong Tensile Strength, 7.50 Cm (Minimum) X 9M (Minimum) . , Adhesive Elastic Bandage (10Cm X 6 Mtr.) , Adhesive Plaster Plain 10 Cm X 10 M , Adhesive Plaster Plain 5 Cm X 10 M , Adhesive Plaster Plain 7.5 Cm X 10 M , Adhesive, Paper Adhesive Plaster 5.00 Cm (Minimum) X 9M (Minimum) , Breathable And Comfortable, Non Woven Adhesive Tape , Adhesive, Paper Adhesive Plaster 7.50 Cm (Minimum) X 9M (Minimum) , Breathable And Comfortable, Non Woven Adhesive Tape , Adhesive, Transparent Polyethylene Surgical Tape : Perforated, Breathable, Polyethylene, Transparent Backing With Straight And Easy Bi-Directional Tear, Coated With Pressure Sensitive, Hypoallergenic Acrylate With High Adhesive Strength Tape (6.5Cm - 8 Cm X 8.5M - 10M) , Adhesive, Transparent Polyethylene Surgical Tape : Perforated, Breathable, Polyethylene, Transparent Backing With Straight And Easy Bi-Directional Tear, Coated With Pressure Sensitive, Hypoallergenic Acrylate With High Adhesive Strength Tape 4.5Cm - 5.5 Cm X 8.5Cm - 10Cm , Epidural Kit, Assorted Size. 16/18, 17/19 & 18/20 : Complete Epidural Kit Wit Epidural Catheter Made Of Polyamide + Plyurethane Having 3/ 6 Lateral Eyes, 3 Embedded Line For X Ray Visibility, Tuhey Needles, 0.2 Micron Filter, Lor Syringe. , Portable Spot Light And Stand With Led Lamps, Min 35,000 Lux , Resuscitation Bags 220Ml-240Ml/500Ml -635Ml/750Ml - 1475Ml Quantity Technical Specification: 1.Self Inflating Bag 2. Provided With Closed Ended Reservoir (Autoclavable) With Two Valves 3. Face Masks: 3 Sizes: 0&1/ 2&3 /4&5: 2 Of Each Size Per Bag Making 2 Set 4. Its Fitted With Safety Valve Set At 40 Cm H2o, Has An Outlet For Pressure Monitoring 5. Bag Should Be Made Of Sterilisable Medical Grade Synthetic Material Like Silicone Etc.6. Patient Valve Should Be Well Sealed, Have Minimum Dead Space And No Forward Or Backward Leaks 7. The Bag Should Have An Oxygen Inlet Which Fits Into The Standard Oxygen Tubing Both From A Cylinder And Central Supply. 8.Reusable Face Masks Should Be Transparent, Fit The Patient Outlet Of The Bag Easily And Have Minimum Dead Space. 9. The System Should With Stand Washing Scrubbing And Autoclaving Procedures, Chemical Sterilization. , Scissor, Sharp-Blunt Scissors. One Pointed & One Blunt Tips Screw Joint, Ring Handle. Very Sharp Edges With Tc Insert. 8 Inch. Curved, Made Of German Ss , Scissor,Metzenbaum Scissors, Screw Joint, Ring Handle, Very Sharp Edges With Tc Inserts, Size 9, Curved, Made Of German Ss. , Suture Material, Double Armed Polyester, 1/2 Circle Tapercut, 17-25Mm, Multistrand (5 Green And 5 White) With Pledget, Size - 2/0, Length Min 75 Cm. , Suture Material, Silk, Black, Fine In Reels Of 25 Mtrs Size 4/0 And 5/0 , Artificial Discs Titanium With Flange,Low Profile. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Balloon Flow Assisted Temporary Pacing Electrode, Size : 4 & 5 Fr.• Depth Marking Aid In Positioning Electrode.• Should Be Balloon Tip. , Billiary Uncovered Stent- Special Design For Low Migration. Non-Traumatic Ends Of The Stent. Highly Flexible And Kink Resistant Braided Catheter. Lower Shortening, Ro Markers At The Middle And Both Ends. Stent Dia : 10 Mm, Stent Length: 60Mm, 80Mm, 100 Mm. , Capd Adapter (Titanium) , Capd Minicap. , Capd Transfer Set. , Control Cable Detacher (Electrical/Hydraulic) Thermoelectric Detachment Cable For Detaching Coils. Hydraulic Detachment Cable For Detaching Coils. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Cranial Stent Device With Delivery System And Retrieval System Close Cell Design Intracranial Stent Delivered Through 0.021” Microcatheter & For One Diameter Fits Arteries 2Mm-4Mm. Stent Retriever System With Closed Distal End Basket. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Cutting Balloon-2,2.5 & 3.• Diameter – 2, 2.5, 2.75, 3.0 Mm.• Scoring The Plaque By Severing The Elastic And Fibrotic Continuity Of The Vessel Wall• Dilating The Lesion At Lower Pressures With Less Recoil• Lumen Gain Through Plaque Compression Instead Of Vessel Wall Expansion. , Ecg Gel, Accessories Of Ecg Machine- Gel Hypoallergic 250 Ml Container With Nozzle , Extra Wide Spherical Microcoil For Aneuysm Platinum Frame Spherical Coils For Medium To Wide Neck Aneurysms, 10 & 18 System Coils 2Mm To 18Mm Extrawide. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Guiding Sheath Size : 5,6,7Fr. Length -45,65,90Cm.• Soft Atraumatic Tip.• Cross-Cut Hemostasis Valve. , Handle, Bp Various Sizes For Interchangeable Blades, Is 3319/Iso/Qms Certificate From The Nabcb Accredited Bodies , Microscope, Binocular, Complete With 2 Eye Pieces And 3 Or 4 (Scanner) Objectives Including Oil Immersion Is: 4381 Along With Is:15269, Is: 8725 And Is: 15268 , Microscope, Ent Operating Microscope : • Apochromatic Optics With Magnification Range 0.4X2.5X Or More. • Working Distance : F=200Mm To 400Mm) • Fine Focusing Range Upto 14Mm Motorize Or Manual. • Straight Binocular Tube F=170Mm Interpupillary Distance Adjustment From 55Mm To 75Mm Or • 180 Degree Tiltable Tube F=170Mm Or Straight Binocular Tube F=170Mm • Pair Of Widefield Push-In Eyepieces 10X12.5X With Sleeves And Magnetic Lock, Diopter Setting From -8D To +5D • 120 Degree Coupling(Usp Point Can Also Use E.G Swivel Coupling Depending On The Need) • Lateral Double Handgrips • Coaxial Fiber Optic Illumination System With Proper Back Up. • Dual Lamp System With Quick Change Over. • Continuously Lamp Intensity Adjustment By Control Knob Near To The Surgeon. • Automatic Lamp Cut Off By Moving Up The Carrier Arm Ensuring Optimal Usage Of Bulb • Stable And Sturdy Floor Stand On Found Lockable Castors, Column(Height : Minimum 1.7M) • Spring Balance Articulated Arm, Carrier Arm, Power Supply Unit, Light Guide 2M, Power Cable. • Sterilization Rubber Caps For All Knobs, Dust Cover. • Co2 Laser Adaptability Should Be Possible. (Usfda/Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/Cdsco Is Not Available) , Microtips 2-200 Micro Litre • Length -50Mm • Should Be Dnase, Rnase And Pyrogen Free • Should Have Very Low Coefficient Of Friction. • Should Be Made Of Medical Grade Polypropylene • Should Be Free Of Lubricants, Dyes And Heavy Metals. , Miniplates For Bone Flap Fixation Titanium,2.5Mm Width + Length Various Sizes, Compatible With 3-25Mm Screws , Refrigerators 210 ± 5 Litres, Bee 5 Star Energy Consumption Rating, Complete With Automatic Voltage Stabiliser Is 302 : Part 2 : Sec 24, Is:15750, Is 1476, Is 10542/Iso/Qms Certificate From The Nabcb Accredited Bodies , Renal Stent -4,5,6 & 7Mm.• Stent Base Should Be Cobalt Chromium.• Should Be Rapid Exchange Delivery System (0.014” / 0.36Mm)• Should Be Shaft Size 80 & 120 Cm. , Sheath Femoral Size : 5/6/7/8 & 9 Fr.• Sheath Length 10 Cm / 11Cm.• Should Be Available Entry Needle 18G. , Silver Ion Impregnated Or Hydrophilic And Benzalkonium Chloride Impregnated Triple Lumen Central Venous Catheter : Triple Lumen Pur Catheter, Polymerized With Biguanide Materials Having Antimicrobial Efficacy, Nitinol Guidewire, Valve Needle & Safesite Connector For Needle Free Injection. , Sterilizer, Instrument Sterilizer Table Model, Size: 430X200x150 Mm. Ø Electric Instrument Sterilizer & Boiler- Made Of High Quality Stainless Steel Seamless Used For Sterilization/ Disinfection Of Surgical Instruments. Ø It Is Fitted With Thermostat & Tray Lifting Arrangement. Ø Material: Rust Proof Stainless Steel 304 Grade. Ø Electric Instrument Sterilizer & Boiler. Ø Stainless Steel 304-Grade, Seamless Construction Fitted With Thermostat & Tray Lifting Arrangement. Ø Instrument Sterilizer: Bis Marked, Is: 5022. Ø Size: Medium Size: 430X200x150 Mm. , Sterilizer, Instrument Sterilizer Table Model, Size: Large Size: 510X200x150 Mm. Ø Electric Instrument Sterilizer & Boiler- Made Of High Quality Stainless Steel Seamless Used For Sterilization/ Disinfection Of Surgical Instruments. Ø It Is Fitted With Thermostat & Tray Lifting Arrangement. Ø Material: Rust Proof Stainless Steel 304 Grade. Ø Electric Instrument Sterilizer & Boiler. Ø Stainless Steel 304-Grade, Seamless Construction Fitted With Thermostat & Tray Lifting Arrangement. Ø Instrument Sterilizer: Bis Marked, Is: 5022. Ø Size: Large Size: 510X200x150 Mm. , Sterilizer, Portable, Vertical, Pressure Type Is 8462 , Stethoscope For Neonates Is 3391/Iso/Qms Certificate From The Nabcb Accredited Bodies , Temporary Pacing Electrodes, Size :5Fr.,6Fr & 7Fr.• Should Be Depth Marking Aid In Positioning Electrodes. , Trachael Intubation Stylet : 1. Intubatio Stylet Having A Walking Stick Design For Insertion Into The Endotrcheal Tube Prior To Intubation. 2. Choices Of Length From 225, 335, 365Mm To Fit Most Adult And Paediatric Tracheal Tubes. 3. Made Of Malleable Aluminium To Easily Adapt To Any Desired Shape. 4. Single Use, Sould Be Available In A Sterile Package, Latest Free. , Tracheostomy Tube : Tracheostomy Tube Non-Cuffed, Size 4, 4.5,5,5.5,6,6.5. Smooth Rounded Tip Obturator. Should Be Soft, Flexible Tube Free Of Plasticizers And Latex. , Transradial Diagnostic Catheter. Size : 5 Fr. & 6Fr• Double Mesh Constriction .• Shape Should Be Tigher Right.• Catheter Length Should Be 100Cm. , Basic Set – Procedure Pack Contains Essential Items Needed For A Number Of Common Procedures Including Lumber Puncture, Spinal Anaesthesia, Epidural Anaethesia, Liver Biopsy, Paediatric Surgery, Oncology Etc. (Also Offers Custom Made Service) I. Tray Ii. Syringe Luerslip Iii. Aperture Drape Iv. Galipot V. Prep Forceps Vi. 4 Ball Swab (Small) Vii. 2 Ball Swab (Large) Viii. 1 Filter Needles 5 Um Ix. 3 Hypodermic Needles 18G, 21G & 25G X. 1 Outer Wrap 75 X 70 Cm Xi. Absorbent Towel 33 X 38 Cm , Cuff Manometer (Cuff Inflator Pressure Gauge): 1. Allows Controlled Initial Cuff Inflation. 2. Intermittend Pressure Monitoring Facility. 3. Instant Visual Confirmation Of Intra-Cuff Pressure. 4. Simple Operation Of Pressure Adjustment Without Need For Disconnection Or Introduction Of Syringe Into System. 5. Solid Green Zone Indicates Ususal Cuff Pressure Range For Tracheal & Tracheostomy Tubes. 6. Connecting Tube Is Supplied With The Gauge For Convenient Positioning. 7. Portable Gauge And Clips Easily Into Pock. , Disposable Fluid Warmer Tubing, * Blood And Iv Fluid Warmer Set With Injection Port. , Disposable Suction Pod Stabilisation System For Cabg, The Pod Should Rotate 3600 , Ear Speculas Specification : A. Troeltschs Ear Specula, Adult Size, Set Of 3. B. Troeltschs Ear Specula, Infant Size, Set Of 3. , Intubating Stylate – Small, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Intubating Stylet – Large, Malleable, Aluminium Tubating Stylets. Each Stylet Is Enclosed In A Pvc Sheath Having Blunt Ends To Reduce The Risk Of Trauma . , Jobson Horne Probes Specification : A. Double Ended – Serrated Tip & Smooth Ring, Length 140 Mm. B. Made Up Of Good Quality Rust Free Stainless Steel Materials. , Mono Leaflet Mechanical Prosthetic Mitral / Aortic Valve With Elevated Pivot Guards • Mono Leaflet Rotatable Or Tilting Disc Rotatable • Swing Ring Hence-25 Alloy • Disc Made Of Uhmpe • Swing Ring Made Of Polyester , Mouth Gag , Mox (Connector) With Pressure Gauge , Mox-26 Oxygen Pressure Reducing Valve , Multiple Clip Applicator - Should Be 20 Titanium Clips Of Different Sizes With Precise Angled Jaws. Anti Drop Rachet. Latteral Transverse Inner Grooves. , O2 Recovery Kit For Tracostomy With Separet Valves And Star Lumen Crush Technology O2 Tube , Oxygen Cylinder - Fine Adjustment Valve Only , Oxygen Cylinder Key For Valve Bull Nose Type , Pediatric Shunt, Size - 3, 3.5, 4 & 5 Mm, * Shunt Should Be Made By Ptfe. * Shunt Length Should Be 10Cm,* Shunt Should Be Used In Cardiac Procedures. , Pin Index Valve For O2 And N2o For Anaesthetic Apparatus , Positive Airway Pressure System : 1. 22Mm Od Patient End To Accommodate Mounthpiece. 2. Scalloped Ambient Air Inlet With Gaps To Resist Occlusion. 3. Pressure Port With White Sealing Cap, To Allow Connection To A Gauge For Easy Monitoring. 4. Gas Inlet Port To Allow Connection To O2 Source With A Flow Meter. 5. Can Be Used In Conjunction With Aerosol Medication (E.G Nebulizer) Via 22Mm Connection. 6. Available With A Disposable Manometer. 7. Transparent Design For Visual Monitoring Of Contaminants. , Ptfe Membrance Patch For Reconstraction In Congenital Cardiac Surgery , Ptfe Vascular Graft Of Different Sizes (5Mm To 8Mm) - Plain , Ptfe Vascular Graft Of Different Sizes (6Mm To 8Mm) – Ring Reinforce , Reusable Introducer : 1. Reusable Introducer To Have A Coude/Angled Tip To Easily Identify Tracheal Rings In Difficult Intubatiions. 2. Clear Gratuaded Markings To Indicate Intubation Depth. 3. Size : 15Ch, 60 Cm 4. Should Be Latex Free. , Laryngeal Mask Airway With Integrated Gastric Access Port (Second Generation), Sizes- 2, 2.5, 3, 4 I) Reusable Upto 30 Times Ii) Autoclavable Iii) Soft, Should Be Made Of Silicon/ Pvc Iv) Integrated Gastric Channel For Drainage Of Gastric Contents V) Provided With Introducer Vi) Inflatable Dorsal Cuff Which Should Withstand Esophageal Pressure Of 50 Cm H2o , Uncuffed Fenestrated Tracheostomy Tube Kit : 1. Should Have Uncuffed Tracheostomy Tube Kit. 2. Should Have 2 Fenestrated Inner Cannulae That Has A Pull Ring That Aids Which Aids In Smooth Insertion And Removal From Tube, Minimizing Patient Trauma. 3. Should Have A Cleaning Brush To Clean The Tracheostomy Tube And Inner Cannula. 4. Should Have A Tracheostomy Tube Holder. , Advance Vaccum Stabilization: Stabilizer With Ball Attachment , Suction 360 Degree Articulation Maximizes Vessel Access And Stabilization , Malleable Footprint. , Catheter, Pulmonary Balloon Angioplasty Catheter , Endoscopic Universal Cutter Cum Stapler, Size : 30 Mm Powered Endocutter With Dual Safety System That Includes A Manual Over Ride System, Can Accomodate All Sizes Of Cartridges. Articulating , Shaft Length -4.4 To 6 Cm Firing Stroke Indicator And Must Have Interchangable 6 Rows Of Staple. , Important Note: 1. All Prospective Bidders Are Requested To Quote The Rate In Boq As Per Accounting Unit (Au) Repeat As Per Accounting Unit (Au) & Item Specifications As Mentioned In The Table-1. Wrong Quoting Of The Rate In Boq Will Be Dealt With As Per Penal Provisions Of The T&C Of The Tender. 2. Quality Of The Product Supplied, May Be Ascertained By Testing / Physical Examination By The Experts At Any Stage Of The Tender Period. 3. The Equipment Should Be Us Fda/ Ce/ Bis/ Cdsco Approved (Us Fda/ Ce Requirements Will Be Applicable Only When The Indian Standards Like Bis/ Cdsco Is Not Available). 4. The Prospective Bidders Of The Said Tender Are Requested To Make A Declaration In Affidavit Under Annexure Vi(B)In Case Of Sole Manufacturer/Importer (I.E. Proprietary In Nature). 5. If The Item(S) Under Sole Manufacturer / Importer Is (Are) Proprietary In Nature, Quarterly Intimation Is Solicited From The Approved Bidders Positively Regarding The Status Of Their Item(S) Proprietary In Nature, Otherwise Their Item(S) Will Be Blocked In The Smis. 6. In Case Of Tie Bid, Decision Will Be Taken By The Tia As Per G.O. No. 2320-F(Y), Dated 07.06.2022 Issued From Finance Department Audit Branch (Group T).

BRR:7639605 Bids Are Invited For Magnetic Pump Model No Mp-150, Inlet & Outlet Size 26Mm, Max Head 14 Meters, Max Flow 160 Lpm, Press Magnetic Pump Model No Mp-150, Inlet & Outlet Size Total Quantity : 2

BRR:7639565 Installation Of Children Play Equipment At A-8 Play Gound In Ward No -16, Under Kalyani Municipality- 1 MULTI PLAY STATION:Supplying, fitting and fixing of INO FRP Made Tube slide, FRP 6 mm- thickness INO FRP Made Wave slide, FRP 5 mm thicknessTotal Cover Area-15’x 13’ Iron part-2’.6” X 2’.6” inch Sq Bar, 3 X 1 Sq Hollo Tube, 1’ X 1’ Sq Hollo Tube 2’.6” thicknessMulti play with one Slide,one tunnel slide, one no shed, Platform height-4.5’, Structural parts made of MS hollow section (including cutting, fitting, welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26, 33 ,48,60,76,50x25mm, thickness of metal parts: max 3mm, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 2 PARK BENCH WITH CASTING HANDLE:Supplying, fitting and fixing of SIZE: Length –5’,Handle –C.I. casting ,Seat: wood or Hollow section or frp. Entire product is assembled with nut bolts. SEAT parts:75X25mm,50x25mm,.Color:multicolor ASPA finish paint on 2 coats of primer. 3 Seesaw Supplying, fitting and fixing of 4 Seat see-saw, 4 No. FRP Made seat, FRP 6 mm thicknessIron part-2’.6” X 2’.6” inch Sq Bar, Thickness 2’.6” mmCover Area-9’ X 5’, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 4 FRP Giraffe SlideSupplying, fitting and fixing of FRP Giraffe Slide: Hight of Giraffe 8 Fit, Platform height 5’ slide lengh 10’ Structural parts made of GI pipe and MS hollow section (including cutting,fitting,welding,bolting and smoothing grinding etc. Completer) Entire product in assembled with nut bolts. Outer diameter of metal parts:60mm,48mm,42mm thickness of metal parts min2.9mm, ERP thickness: 4mm to 5mm, ERP DENSITY: 1600KG/M3. Color multicolor ASPA finish paint on 2 coats of primer. 5 Circular Swing Supplying, fitting and fixing of 4 seat circular swing, FRP Portion Thickness 5 mmIron part-2 inch Round pipe, 1 inch Round pipe, 2no Bearing, Iron thickness 2’.6” mm Cover Area-8’ X 8’,FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 6 ATOM SWING WITH 6 SEAT Supplying, fitting and fixing of hexagonal shape Height:8.5ft.,length-6’each side,The chain link 8mmand take the load of 80 kg(each). . Structural parts made M.S Hollow pipes (including cutting, fitting, welding, Bolting and smooth grinding etc. Outer Diameter of Metal Parts-60mm, Thickness of Metal Parts- min. 2.2mm-3.0 mm, FRP thickness: 6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer. 7 GST 18 % 8 CESS 1 %

BRR:7639564 Installation Of Children Play Equipment Bibutibhushan Park In Ward No -2, Under Kalyani Municipality-1 MULTI PLAY STATION:Supplying, fitting and fixing of INO FRP Made Tube slide, FRP 6 mm- thickness INO FRP Made Wave slide, FRP 5 mm thicknessTotal Cover Area-15’x 13’ Iron part-2’.6” X 2’.6” inch Sq Bar, 3 X 1 Sq Hollo Tube, 1’ X 1’ Sq Hollo Tube 2’.6” thicknessMulti play with one Slide,one tunnel slide, one no shed, Platform height-4.5’, Structural parts made of MS hollow section (including cutting, fitting, welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26, 33 ,48,60,76,50x25mm, thickness of metal parts: max 3mm, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 2 PARK BENCH WITH CASTING HANDLE:Supplying, fitting and fixing of SIZE: Length –5’,Handle –C.I. casting ,Seat: wood or Hollow section or frp. Entire product is assembled with nut bolts. SEAT parts:75X25mm,50x25mm,.Color:multicolor ASPA finish paint on 2 coats of primer. 3 Seesaw Supplying, fitting and fixing of 4 Seat see-saw, 4 No. FRP Made seat, FRP 6 mm thicknessIron part-2’.6” X 2’.6” inch Sq Bar, Thickness 2’.6” mmCover Area-9’ X 5’, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 4 FRP Giraffe SlideSupplying, fitting and fixing of FRP Giraffe Slide: Hight of Giraffe 8 Fit, Platform height 5’ slide lengh 10’ Structural parts made of GI pipe and MS hollow section (including cutting,fitting,welding,bolting and smoothing grinding etc. Completer) Entire product in assembled with nut bolts. Outer diameter of metal parts:60mm,48mm,42mm thickness of metal parts min2.9mm, ERP thickness: 4mm to 5mm, ERP DENSITY: 1600KG/M3. Color multicolor ASPA finish paint on 2 coats of primer. 5 Circular Swing Supplying, fitting and fixing of 4 seat circular swing, FRP Portion Thickness 5 mmIron part-2 inch Round pipe, 1 inch Round pipe, 2no Bearing, Iron thickness 2’.6” mm Cover Area-8’ X 8’,FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 6 ATOM SWING WITH 6 SEAT Supplying, fitting and fixing of hexagonal shape Height:8.5ft.,length-6’each side,The chain link 8mmand take the load of 80 kg(each). . Structural parts made M.S Hollow pipes (including cutting, fitting, welding, Bolting and smooth grinding etc. Outer Diameter of Metal Parts-60mm, Thickness of Metal Parts- min. 2.2mm-3.0 mm, FRP thickness: 6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer.

BRR:7639563 Installation Of Children Play Equipment At Prayes Club Play Gound In Ward No -13, Under Kalyani Municipality- 1 MULTI PLAY STATION:Supplying, fitting and fixing of INO FRP Made Tube slide, FRP 6 mm- thickness INO FRP Made Wave slide, FRP 5 mm thicknessTotal Cover Area-15’x 13’ Iron part-2’.6” X 2’.6” inch Sq Bar, 3 X 1 Sq Hollo Tube, 1’ X 1’ Sq Hollo Tube 2’.6” thicknessMulti play with one Slide,one tunnel slide, one no shed, Platform height-4.5’, Structural parts made of MS hollow section (including cutting, fitting, welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26, 33 ,48,60,76,50x25mm, thickness of metal parts: max 3mm, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 2 PARK BENCH WITH CASTING HANDLE:Supplying, fitting and fixing of SIZE: Length –5’,Handle –C.I. casting ,Seat: wood or Hollow section or frp. Entire product is assembled with nut bolts. SEAT parts:75X25mm,50x25mm,.Color:multicolor ASPA finish paint on 2 coats of primer. 3 Seesaw Supplying, fitting and fixing of 4 Seat see-saw, 4 No. FRP Made seat, FRP 6 mm thicknessIron part-2’.6” X 2’.6” inch Sq Bar, Thickness 2’.6” mmCover Area-9’ X 5’, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 4 FRP GiraffeSupplying, fitting and fixing of FRP Giraffe Slide: Hight of Giraffe 8 Fit, Platform height 5’ slide lengh 10’ Structural parts made of GI pipe and MS hollow section (including cutting,fitting,welding,bolting and smoothing grinding etc. Completer) Entire product in assembled with nut bolts. Outer diameter of metal parts:60mm,48mm,42mm thickness of metal parts min2.9mm, ERP thickness: 4mm to 5mm, ERP DENSITY: 1600KG/M3. Color multicolor ASPA finish paint on 2 coats of primer. 5 Circular Swing Supplying, fitting and fixing of 4 seat circular swing, FRP Portion Thickness 5 mmIron part-2 inch Round pipe, 1 inch Round pipe, 2no Bearing, Iron thickness 2’.6” mm Cover Area-8’ X 8’,FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 6 ATOM SWING WITH 6 SEAT Supplying, fitting and fixing of hexagonal shape Height:8.5ft.,length-6’each side,The chain link 8mmand take the load of 80 kg(each). . Structural parts made M.S Hollow pipes (including cutting, fitting, welding, Bolting and smooth grinding etc. Outer Diameter of Metal Parts-60mm, Thickness of Metal Parts- min. 2.2mm-3.0 mm, FRP thickness: 6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer. 7 GST 18 % 8 CESS 1 %

BRR:7639562 Supply, Fittings And Fixing Of Paver Block Platform(Play Equipment) At Play Ground, In Ward No -02, Under Kalyani Municipality.- 1 Paver Block Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.(c) 50 mm thick interlocking designer concrete paver block M-35 grade for light-traffic zone,commercial & office complex, tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) (i) Grey 2 cement concrete kerbs Providing and fixing at or near ground level precast cement concrete in kerbs (size: 450 mm x 350 mm x width 150 mm at bottom with bevelled nosing at top) of cement concreat M20 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.Ref.Page -228, Item -8 ,PWD SOR Vol-I w. e. f. 1.11.2017 3 Add 18 % GST 4 Add 1 % Cess

BRR:7639547 Construction Of Platform For Statue Near Bediapara Indira Mancha In Ward No-11.

BRR:7639540 Electrification With Necessary Electrical Works At Swm Godown Located At Milanpally Sarkari Abasan, Ward No. 25.= 1 Supply installation testing & commissioning of flat type wall/ floor mounted indoor wooden Panel board with dust and vermin proof powder painted 100 AMPS MS sheeted Main Switch board having |fixed accommodate the following mountings complete with coper bus bar of 100 Amp capacity & channel base at the bottom connection & interconnection by coper wire & strip along with necessarynut & bolts complete as requred(C&S/Simmens/ABB/L&T make. a) 100 Amp rating 415 Volt ,b) 100 A capacity 415 Vole 4 bar CU busbar of bars size 25mmX 6mmX Imtr-Ino,c) 415Volt 100 amps 3 nos Cut Out with all required items and iron Angel 1.5x1.5 with Electric 10 rft meter frame 2x2 (1.5x1.5 ms angle) 2 Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for TPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment, 8 Way Make Legrand. PWD Electrical 2017 SOR,Page: D-12,Sl no. 16 3 Supplying and fixing 240/415 V MCB of Breaking capacity &C characteristics on din rail of existing DBs and necessary10kA connection 6-32 A Make Legrand. PWD Electrical 2017 SOR, Page: D-6, SI no.7 4 Supplying and Drawing 1.1 KV grade single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precisionmake) incl. necy. PVC clips, fittings etc, a)2 x 36/0.3 (2.5 samm) + lx 22/0,3 (1.5 sgmm). PWD Electrical 2017 SOR, Page: E-11, Sl no. 1(c) 5 Distribution wiring in 1.J KV grade 2x22/0.3 (1.5 sqmm) single core stranded FR PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with lx22/0.3 (1.5 sqmm) single core stranded FR PVOC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. Connections and making earthing attachment and mending good damages to building Works. (PVC casing-capping and Switch board both on surface]. PWD Electrical 2017 SOR, Page: E-11, Sl no.2(g) 6 (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate Jand making necy. connections with PVC Cu wire and earth continuity wire etc, on Board. PWD Electrical 2017 SOR, Page: E-18, Sl no.9(b) . 7 Supplying & Fixing of Round Reces type 10 W LED Downlighter Ceiling including making necessary connections etc. as required. (Make : Philips. Model : DN 296 B LED 15S-6500 PSE WH S1 or equivalent) 8 Supply and fixing of LED Batten T8 4 FLARE SQUARE 20 Wtt. CW-/6500K/F3SNK4CY 6A2C900 ( Make HPL-Jonex Plus (sq) 33 OW/Havells/Bajaj/Crompton/Philips 9 Suppluy and Fixing of Batten Holder and 12wt LED Lamp 10 LED STREET LIGHT SET 110 WT PHILIPS. SMC Pur Rate. 11 Fixing of LED STREET LIGHT SET 110 WT on Wall 12 Supply of 1.5 DIA G. I PIPE TATA MEDIUM. SMC Pur Rate. 13 GI PIPE BENDING 1.5. SMC Pur Rate. 14 Supplying IRON CLAMP 1.5 (PCC & RAIL POLE)DIA BEST QUALITY. SMC Pur Rate. 15 Suppiyng of wALL FAN 16 BAJAJ/CROMPTON /HAVELLS/USHA OR Equivalent. SMC Pur Rate. 16 Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts&washers (6 mm dia x 62 mm long) or as regd. incl. S&F 24/0.20 PVC insulated flexible copper wire 0.5 mt. length. PWD Electrical 2017 SOR, Page: C-4, SI no.29 17 Add GST @ 18% 18 Add Cess @1%

BRR:7639383 Installation Of Tubewell With Platform At Icds No 300 At Madhya Khairbari Code-109423588

BRR:7639272 Bids Are Invited For High Density Thickner Design, Engineering, Supply And Supervision Of Erection & Commissioning Of 4M Dia *3 M Swd High Density Thickener , Density Meter Total Quantity : 1

BRR:7639244 Bids Are Invited For 01. Synthetic Lube Oil, Ir, Techtrol Gold Iii Reference Number: Techtrol Gold I , Transmission Oils Total Quantity : 3120

BRR:7639237 Bids Are Invited For Goods Transport Service – Per KM Based Service - Transportation of Railway material ie Traction Machines Motorized Wheel Sets Motorized Truck Assembly and other Railway material; Open Platform Truck or Trailer; 25 MT Total Quantity :

BRR:7639214 Bids Are Invited For Welding Rod , Brush electrical contact , Rectifier 1400 PIV 10 A bridge rectifier slip ring AVR 380 VCD Transformer repalcement , Core assy transformer , Board Terminal bakelite 1900mm x 70mm x 6mm thick , strip terminal 12 ways , Mounting antivibration resilient doble U shear , Voltmeter MI type 0 to 300V AC 96Sqmm 1 point 5 flush mtd , Socket Electrical 3 pole 30 Amp 500V with cap and chain , Socket Electrical 3 pole 15 Amp 250V with cap and chain , Socket Electrical 2 pole 5 Amp 250V with cap and chain , Switch Rotary 2 pole 16 A 250VAC , Switch Rotary 4 pole 40 A 250VAC , AC Ammeter moving iron type 0 to 40 Amp 96 Sqmm class 1 point 5 , Meter Electrical frequency reed type 47 to 50 to 53 Hz 96 Sqmm , Switch push button green star Push button NO to NC Green , Switch push button Red star Push button NO to NC Red , Time Totalizer 50Hz 5 digit with reset to recd hours , Indicating lamp supply ON 230 V AC and set running , Indicating lamp for Charging Failure 12V AC , Indicating lamp LOP 12 VAC , Shourd Panel Lamp 12 VDC 3 point 5 W , Cable Control Assy for Eng stop stopper cable , Fuse 32A 250 VAC HRC , Fuse 16A 250 VAC HRC , Fuse link Electrical cartridge 440V 6A , Relay Armature plug in type miniature 2 Co 12 VDC 8 Pin Relay with socket 12 VCD , Transformer step down 0 to 220 to 230 to 240 to 250v primary and 0 to 15VAC 5 Amp supply Secondary , Semiconductor device diode type 20USSR6 6Amp , Disc flexible LF to 225 , Wheel Ball valve 1 oblique 4 inch BSP thread , fuel gauge Elect float type , Lead secondary battery positive 933 point 5mm long , Lead secondary battery negative 933 point 5mm long , Fuse link Electrical cartridge 440VAC 6A , Pipe flexible 60 inch long , Tape insulation 1 point 25mm and 10 m long , Element lub oil filter spin on type , Element fuell filter pre , Element secondary fuel filter , Pipe flexible 12 point 5 inch long , Fuel Pipe flexible 30 inch long , Fuel Pipe flexible 35 inch long , DC ON oblique OFF switch 16 Amp 2 Pole , Decompressor shaft and lever assy , Eng OH Gasket set complete , Anti Vibration mtg Pad rubber MS Plate , Oil Seal FWE , Oil seal GE , Silencer exhaust , Nozzle Fuel Injector , Pump Fuel Injection , Plunger fuel Pump Tappet , Joint Fuel Pump , 4 ST Relay , Engine Protection Unit Engine Safety Unit , Engine Stop Solenoid 12 VDC , PVC Chanels for cables Caping and Casing , Din Rail , Screw For Rail Total Quantity : 116

BRR:7639213 Bids Are Invited For Operation and Maintenance Of Electrical Systems/Electrical Installations - ANNUAL MAINTENANCE AND SERVICE CONTRACT AMC FOR PREPAID POSTPAID METERS INSTALLATION UNDER CA NO GE CHE 24 OF 20182019 AS Per ATC Total Quantity :

BRR:7639161 Bids Are Invited For Film Sound Equipments Merging Technologies Anubis Pro Sps , Pro Tools Ultimate Annually Paid Subscription For Edu Students New For Five Years , Pace Ilok 3 , Avid S1 Control Surface Including Hardware Coverage Plan , Pro Tools Or Dock Control Surface , Dante Avio 2 Ch Output Adapter , Waves Mercury Bundle , Nugen Post Bundle With Adds Isl Dsp Halo Upmix 3D Halo Downmix 3D , Fabfilter Pro Bundle , Audio Ease Speaker Phone 2 , Audio Ease Altiverb 8Xl , Izotope Post Production Suite 7.5 , Benq 27 Inch Usb C Display Full Hd Or Equivalent , Netgear Av Line M4250 Gsm4230p 24 Port Gigabit Poe Plus Complaint Managed Network Swith With Sfp 300 W , Promise Pegasus 3 48 Tb , Sonnet Thunderbolt To Dual Dp , Waves Update Plan For 4 Nos Of 360 Surround Tools And 11 Nos Of Diamond Bundle , Altiverb 7Xl To Altiverb 8Xl Upgrade , Rx Post Production Suite 7.5 , Ozone 11 Advanced Upgrade From Any Ozone Advanced , Accentize Chameleon 2 Reverb , T Power Converter To 48V 1 23 , Audio Digital Signal Processor Total Quantity : 60

BRR:7639098 Bids Are Invited For Dew Point Meter With Sensor_ Schedule-1_ Item_ 10_ M9476257137_ 100254961 , Dew Point Meter Total Quantity : 2

BRR:7639089 Bids Are Invited For Powder Feeder Hose - 5 Meter Length (Part No. Mf4- 500.001) , Tip Nozzle (Part No. 3Me-210) , Dual Powder Port Clamp (Part No. 9Mbm-961) , Mounting Block T2 Type (Part No. 9Mbm-982) , Tranqulizer Gun Total Quantity : 39

BRR:7639065 Bids Are Invited For Procurement Of Tubes For Utility Boilers In Cpp 3 1000180315 , 1000180316 , 1000180317 , 1000180318 , 1000180319 , 1000180320 , 1000180321 , 1000180322 , 1000180323 , 1000180324 , 1000180325 , 1000180326 , 1000180327 , 1000180328 , 1000180329 Cpp-3, Ub, Furnace Roof Panel-1, Sa-192 , Cpp-3, Ub, Furnace Roof Panel-2, Sa-192 , Cpp-3, Ub, Furnace Roof Panel-3, Sa-192 , Cpp-3, Ub, Furnace Roof Panel- 4, Sa-192 , Cpp-3, Ub, Furnace Roof Panel-5, Sa-192 , Cpp-3,Ub,Furnace Roof Tube,Var-14,Sa-192, Cpp- , Boiler, Superheater And Heat Exchanger Tubes ( As Per Astm A 213 ) Total Quantity : 108

BRR:7639053 Bids Are Invited For 1 - M3101152605 - 100255654 , Submersible Pumps For Slurry Application Total Quantity : 2

BRR:7639012 Bids Are Invited For Facility Management Services - LumpSum Based - DAE Anupuram Township; Recording of Energy Meter Readings and carrying out other electrical engineering activities in Anupuram Township during the year 2025-2026; Consumables to be provided by service pr... Total Quantity :

BRR:7638996 Bids Are Invited For Supply Of Double Capstan Winch Machine Of 5 Ton Or Higher Capacity For Application In Ehv Tl , Multicable Winch Total Quantity : 27

BRR:7638972 Bids Are Invited For Coriolis Mass Flow Meter (Q3) Total Quantity : 2

BRR:7638967 Bids Are Invited For Paper-based Printing Services - Printing with Material; Loan Application Form; Offset , Paper-based Printing Services - Printing with Material; Surrender value Form; Offset , Paperbased Printing Services - Printing with Material; Claim Form Number 3816; Offset , Paper-based Printing Services - Printing with Material; Change of nomination Form no 3750; Offset , Paper-based Printing Services - Printing with Material; Endorsement Form number 5198; Offset , Paperbased Printing Services - Printing with Material; NEFT forms; Offset , Paper-based Printing Services - Printing with Material; Register BCR; Offset , Paper-based Printing Services - Printing with Material; Register Attendance register; Offset , Paper-based Printing Services - Printing with Material; Book/Booklet; Offset Total Quantity :

BRR:7638951 Bids Are Invited For Jumbo Platform Trucks,Installation And Commissioning For Platform Trucks Total Quantity : 6

BRR:7638828 Bids Are Invited For Dew Point Meter_ Schedule 1_ Item_ 10_ M943840600_ 100255970 , Dew Point Meter Total Quantity : 2

BRR:7638726 Bids Are Invited For Ma Range Ac Dc Current Measurement Tools Electrical Measurement Tools-1 , Electrical Measurement Tools-2 , Electrical Measurement Tools-3 , Electrical Measurement Tools-4 , Electrical Measurement Tools-5 , True Rms Clamp Meter Total Quantity : 25

BRR:7638605 Tender for Providing Monthly Manual and spot billing of 11052 (11052x5=55260) consumers per month ( July. 2025, Aug. 2025, Sep. 2025, Oct. 2025 and November 2025 )by loading of SBM, meter reading preparation of energy hills, delivery of energy bills to the consumers duly acknowledged, downloading of SBM, under electrical Sub-Division HPSEBL Rehan. (Ch. To R/M of Consumer Billing section under ESD Rehan.))

BRR:7638572 Building Works For Avu And Dcu Revamp New Hgu And Offsite Utilities And Other Facilities For Dr 1 Expansion Project At Digboi Refinery Of Indian Oil Corporation Limited Building Works For Avu And Dcu Revamp New Hgu And Offsite Utilities And Other Facilities For Dr 1 Expansion Project At Digboi Refinery Of Indian Oil Corporation Limited

BRR:7638571 Construction Of Pre-Engineered Building And Associated Civil And Electrical Works For Storage Warehouses For Avu And Dcu Revamp, New Hgu And Offsite Utilities And Other Facilities For Dr 1.0 Expansion Project At Digboi Refinery Of Iocl

BRR:7638469 Bids Are Invited For , Pick And Carry Hydraulic Mobile Crane As Per Is 4573 (Old Generation Hydra Crane With Rear Mounted Cabin) Total Quantity : 1

BRR:7638428 Procurement Of Hydrogen Gas Refer Tender Documents , Supply Of Hydrogen Gas , Hydrogen Gas Technical Specification: 1 Cylinder = 7 Cubic Meter Purity Of 99.9%, V/V Pressure: 140 Ksc

BRR:7638381 Bids Are Invited For Fabrication, Testing And Supply Of Gamma Count Rate Meters And Shielded Probe Interface Units Total Quantity : 1

BRR:7638254 Bids Are Invited For Gym Equipments Multi Adjustable Bench , Treadmill , Barbell Rack , Elliptical Cross Trainner , Cycling Machine , Battle Rope , Wheel Roller For Abdomnial Workout , Vertical Dumbell Rack , Pectoral Fly Machine , Leg Extension Machine , Leg Curl Machine , Leg Press Or Hack Squat Machine , Abdominal Exercise Machine , Functional Traiiner , Smith Machine , Multi Adjustable Bench For Bench Press , Deadlift Platform , Trap Bar , Barbell , Ez Curl Barbell , Straight Barbell 4 Ft , Weight Plates 1 Kg , Weight Plates 2.5 Kg , Weight Plates 5 Kg , Weight Plates 7.5 Kg , Weight Plates 10 Kg , Weight Plates 15 Kg , Dumbbell 1 Kg , Dumbbell 2.5 Kg , Dumbbell 5 Kg , Dumbbell 7.5 Kg , Dumbbell 10 Kg , Dumbbell 12.5 Kg , Dumbbell 15 Kg , Dumbbell 17.5 Kg , Dumbbell 20 Kg , Kettle Bell 2 Kg , Kettle Bell 4 Kg , Kettle Bell 8 Jkg , Kettle Bell 12 Jkg , Yoga Mat , Medicine Ball 2 Kg , Medicine Ball 4 Kg , Weight Lifting Belt Small , Weight Lifting Belt Med , Weight Lifting Belt Large , Weight Lifting Belt Xtra Large , Exercise Or Yoga Ball , Mat Inerlock , Locker , Leg Pull Down Machine , Squad Rack With Plate Holder , Power Sled , Dumbbell 22.5 Kg , Dumbbell 25 Kg , Dumbbell 27.5 Kg , Dumbbell 30 Kg , Dumbbell 35 Kg , Dumbbell 40 Kg , Chest Press (Version 2) Total Quantity : 3839

BRR:7638241 Bids Are Invited For Platform Truck As Per Is 10311 (Latest) Total Quantity : 1

BRR:7638142 Bids Are Invited For Platform Truck As Per Is 10311 (Latest) Total Quantity : 1

BRR:7638086 Bids Are Invited For Pride Supreme 15 W 40,Synthetic 5 W 30,4T Zoom 10 W 30,Ultra Kb 30,Gear Super 80 W 90,Transmission Total Quantity : 12100

BRR:7638006 Bids Are Invited For Oil Temperature Indicating Alarm Meter , Level Alarm/Switch (Bhel) Total Quantity : 60

BRR:7637972 Bids Are Invited For Customized Intelligent Electronic Electromechanical Platform&Highend Auxiliary For Gynec Procedures Total Quantity : 1

BRR:7637779 Bids Are Invited For Panel Meter Calibrator Total Quantity : 1

BRR:7637768 Bids Are Invited For 4C X 35 SQMM PVC INSULATED/SHEATHED ARMOURED AL. CABLE 4CX35 SQMM HR PVC INSULATED ARMOURED AL. POWER CABLE WITH COLOUR CODING HAVING FOLLOWING SPECIFICATIONS. 1)VOLTAGE GRADE: 1.1 KV ARMOURED CABLE. 2)CONDUCTOR: 4CX35 SQMM STRANDED EC GRADE ALUMINUM CONDUCTOR. 3)INSULATION: HR PVC TYPE-C PROVIDED WITH FILLER AS PER IS 5831. 4)INNER SHEATH: EXTRUDED HR PVC TYPE ST-2. 5)ARMOURING: SINGLE LAYER GALVANIZED FLAT STEEL STRIP. 6)OUTER SHEATH: EXTRUDED HR PVC TYPE ST-2. 7)APPLICABLE STANDARD: IS 1554(PART-1)/1988 WITH LATEST AMENDMENT. 8)PACKING: CABLE SHALL BE SUPPLIED IN A SINGLE LENGTH OF 1000 METERS WITH SEQUENCIAL METER MARKING AT AN INTERVAL OF 1 METER. 9)MANUFACTURES NAME, VOLTAGE GRADE, YEAR OF MANUFACTUR, SIZE OF CABLE, ISI MARK SHALL BE EMBOSSED ON THE BODY OF THE CABLE. 10)THE CABLE ENDS SHALL BE SEALED AGAINST ENTRY OF WATER. 11)APPLICATION: OUTDOOR INSTALLATION (CATEGORY-02). 12)PARTY TO SUBMIT DETAIL SPECIFICATION OF THE QUOTED CABLE DURING SUBMISSION OF OFFER. 13)PARTY TO SUBMIT ALL TEST REPORT (TYPE TEST AND ROUTINE TEST) BEFORE DESPTACHING THE MATERIAL. Total Quantity : 4000

BRR:7637672 Bids Are Invited For Transmission Oil (Hyx-330),Priming Pump Oil (20W40),Hydraulic Oil (Hyspin-68),Pump Gear Box Oil (Sa Total Quantity : 420

BRR:7637629 Bids Are Invited For Windows Operating System,Red Hat Linux,Virtualisation Software With Cloud Management Platform,San S Total Quantity : 75

BRR:7637551 Bids Are Invited For Image Based Sensing Platforms For Detection Of , Electronics & Hardware Kit Total Quantity : 1

BRR:7637510 Bids Are Invited For Truck Mounted Boom Lift Platform (Q2) Total Quantity : 1

BRR:7637468 Bids Are Invited For Supply And Application Of Thermal Insulation Of Equipment And Piping- Fixed Type Insulation. Refer Total Quantity : 27840

BRR:7637422 Bids Are Invited For Desktop And Application Virtualisation Software (Q3) Total Quantity : 17

BRR:7637379 Bids Are Invited For Custom Bid For Services - Construction Work Repair, Maintenance, And Installation Of Plant Similar Category Systemsequipments (Version 2)-Dismantling of brick work coping , Demolishing brick work manually/by mechanical means including stacking of serviceble material and disposal of unserviceble material within 50 meters lead as per direction of Engineer-in- charge in cement mortar Cum 4.67 2 15.25 Dismantling stone flooring , floor cutting dismantaling stone slabflooring laid in cement mortar including stacking serviceble material and disposalof unserviceble material within 50 meters lead . Sqm 65.46 3 MR Re-baring 16mm dia bar column with epoxy-based chemical adhesives Each 80 4 5.3 P/L RCC 1:1.5:3 For Beams Reinforced cement concrete work in beams suspended floors ,roofs having slope up to 15 landings balconies shelves ,chajjas,lintels ,bands,plain window sills staircases and spiral staircasesabove plint level up to floor V level excluding the ost of centering shuttering finishing and reinforcement with 1.1.5.3 1 (cement 1.5 (ZoneIII) 3 Graded stone aggregate 20 mm nominal size) Cum 14.8 5 5.22.6 P/L Reinforcement steel reinforcement for R.C.C work including straightening ,cutting, bending placing in position and binding all complete up to plint level (5.22.6) TMT Bars of 500 grade Kg 2654 6 5.9.5 Centering & Shuttering for beams etc centring & shuttering including strutting prop[ping etc ..and removal form are all heights (5.9.5) lintels beams , plint beams griders brussmers and cantilivers floor beam Sqm 132.12 7 5.9.6 Columns ,Pillars, Piers , Abutments ,Posts and Struts Sqm 30.14 8 6.4.2 Brick work with common burnt clay F.P.S (non modular) bricks of class designetion 7.5 in superstructure above plint level in all shapes and sizes in cement mortar1:6(1cement 6 coarse sand) Cum 85.04 9 6.22 Brick tile clading The brick masonary work 5 cm thick with common burnt clay F.P.S (non modular) tile bricks of class designetion 10 in cement mortar 1:3(1 cement3 coarse sand ) in superstructure above plinth up to floor V level Sqm 176.4 10 9.1 P F Teak wood frame , Providing wood work in frames of doors windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasterners of requireddia and length( hold fastlugs or dash fastenershall be paid for separetely

BRR:7637367 Bids Are Invited For True Rms Clamp Meter,Digital Earth Resistance Meter,Insulation Tester,Insulation Tester Total Quantity : 8

BRR:7637309 Bids Are Invited For Repair, Maintenance, And Installation Of Plant/ Systems/Equipments (Version 2) - Office Space; Networking System; Service Provider To supply, install, test and commission a structured cabling system using CAT 6 UTP cables and related components across designated location to support voice and data network. 3.1 Cabling infrastructure with CAT 6 UTP cables of approx. 1058 meters from briefing room to various destinations. 3.2 Installation of Voice keystone jacks of total 13 units, Data keystone Jacks of 12 units, I/O boxes of total 113 units. 3.3 Installation of 2 Fibre Optical Cable from briefing room to switch box of approx. 70 meters length. 3.4 Perform cable continuity and signal integrity testing using a cable certifier. Total Quantity :

BRR:7637300 Bids Are Invited For Custom Bid For Services Handling ,Transport And Other Mining Services - Percentage Quote Based Cleaning, Sanitation And Disinfection Service - Similar Category Outcome Based Backup As A Service Support Services Calibration Services Expenditure on Ships vehicle following works: a) Fabrication of seat covers. b) Application of anti rust paint coat in ships vehicle. Total Quantity :

BRR:7637294 Bids Are Invited For Custom Bid for Services - DESIGN, SUPPLY & SUPERVISION OF RETRACTABLE TYPE SWING PLATFORM AT TANK LORRY FILLING GANTRY & TANK LORRY CALIBRATION TOWER AT BPCL PATNA TOP Support Services Total Quantity :

BRR:7637277 Bids Are invited for Nk000777 Flexible Pipe , Nk100002 Axc Contact , Nk000486 Fuel Filter , Nk000489 Primary Filter , Nk000915 Exhaust Manifold , Nk000739 Avr , Nk Air Filter , Nk000636 Digital Meter , Nk000701 Hours Meter , Nk100001 4 Pole Connector Total Quantity : 15

BRR:7637150 Bids Are Invited For Desktop And Application Virtualisation Software (Q3) Total Quantity : 10

BRR:7637142 Bids Are invited for Jack 10 Ton , Soldering Kit , Multimeter , Cutting Player , Screwdriver 165Mm , Star Ln Key Set , Filter Clamp Als And 2.5 Ton , Filter Clamp Belt Type , Hydro Meter Total Quantity : 15

BRR:7637017 Bids Are invited for Castrol Gtx Supper 1000Tm , Castrol Redicool , Gear Oil Ep 80 , Ht Atf Type A , Hp Atf Dex 111 , Hp Atf Dex 11 , Hp Oxle Oil 80W 150 , Sae 75W90 Gl 3 , Castrol Brake Fluid Dot 4 , Shell Make Spirax S3 Atf Md3 , Mahindra Maximile Log Genuine Wb , Mahindra Maximile Feo New Generation Genuine Engine Fluid Total Quantity : 108

BRR:7636939 Bids Are Invited For Desktop And Application Virtualisation Software Total Quantity : 25

BRR:7636887 Bids Are invited for Clutch Master Cylinder - For Tata , Door Lock - For Hmv , Door Mechanism - For Hmv , Air Vent Plug - For Hmv , Solenoid Switch - For Hmv , Door Lock Lh - For T815 , Cable - For Av15 , High Pressure Hose - For Hmv , Wiper Blade - For Safari , Armature - For Tata , Brg Bush - For Tata , Pinion With Bearing Steel - For Tata , Rectifier Assy - For Tata , Regulator Assy Rh - For Stln , Stop Light Switch - For Tata , Blade Assy Wiper - For Mg , Batter Cut Off Switch - For T815 , Self Lubricating Bush - For T815 , Gasket Oil Drain - For Tata , Clutch Booster Alternate - For Stln , Engine Speed Sensor - For Stln , Flasher Change Over Switch - For Hmv , Rpm Meter - For Stln , Oil Filter - For Scorpio , Fuel Filter - For Scorpio , Air Filter - For Scorpio Total Quantity : 28

BRR:7636875 Bids Are invited for Starter Motor 12V Complete , Carbon Bush , Fuel Flexible Pipe , Hours Meter , Ol Filter Total Quantity : 5

BRR:7636850 Bids Are Invited For Hp Pump Repair And Servicingcarried Out , Utility Vehicle Total Quantity : 1

BRR:7636762 Supply Of Different Types Of Hardware Material, Hand Tools And Cleaning Tools Under Wwd On Rate Contract Basis. , Pig Lead Caulking Lead Ingot With Minimum 99.8% Purity Lead Level Confirm To Is: 782:1978 , Lead Wool Grade A 99.8% Purity Level , Spunyarn 21 Ply , M-Sealmakemahindra Or Equivalent , Neoprene Rubber Sheet 3Mm/ 6Mm Thick Confirm To Is 3400 , M.S. Nut Bolt Full Threats 2 To 6 Three Soot To Six Soot Confirm To Is 800 , M.S. Washer All Type And Sizes , Lock, 6 Levers Make Link/ Godrej/ Navtal , Bombay Nail (All Size Mix) , Ms Clip , Screw All Size , Square Shape Gland Rope 08 To 16Mm Graphite Gland Packing Rope Reinforced With Synthetic Fiber. Champion/ Pacman/ Sigma/ Turner Make , Supply Of 63Mm Dia Non-Percolating Flexible Fire Hose Synthetic Fiber Circular Woven Jacketed Rubber Bearing As Per Following Specification- 1) Is: 636-88 Type A Mark In 30 Meter Length 2) Burst Pressure 50 Kg/Cm2/Bar 725 Psi(Mid) 3) Working Pressure 17 Kg/Cm2/Bar 250 Psi 4) Mass Per Meter 425 Gross (Max) 5) Heat Resistance 8 Sec (Min) , Pickaxe Heavy Duty Big Size Confirm To Is 273 , Spade (Phawada) Heavy Duty , Crow Bar 25Mm Dia 1Mtr. Long Make Everest/ Tata/ Taparia , Wooden Handle For Spade, Best Quality , Wooden Handle For Pickaxe, Best Quality , Iron Pan Gi Sheet 18 Dia Heavy Heavy Gauge Wt. 1.50Kg , Chisel 150Mm Long 25 Mm Cutting Edge, Confirmng To Is:5663-1970 Make Everest/ Tata/ Taparia , Chisel 250Mm Long 25 Mm Cutting Edge, Confirmng To Is:5663-1970Make Everest/ Tata/ Taparia , Sledge Hammer Head Only Heavy Duty900g Make Everest/ Tata/ Taparia , Sledge Hammer Head Only Heavy Duty 5400G Make Everest/ Tata/ Taparia , Hack Saw Frame Heavy Duty , Hack Saw Blade Double Edge , Pipe Wrench 10 Inch (250Mm) Length(Stillson Type) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Pipe Wrench 12 Inch (300Mm) Length(Stillson Typ) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Pipe Wrench 14 Inch (350Mm) Length(Stillson Type) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Pipe Wrench 18 Inch (450Mm) Length(Stillson Type) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Pipe Wrench 24 Inch (600Mm) Length(Stillson Type) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Pipe Wrench 36 Inch (900Mm) Length(Stillson Type) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Pipe Wrench 48 Inch (1200Mm) Length(Stillson Type) , Confirming To Is:4003-1978 Isi Mark Make Everest/ Tata/ Taparia , Chain Pipe Wrenches 80Mm Dia Isi Mark Make Everest/ Tata/ Taparia , Chain Pipe Wrenches 100Mm Dia Isi Markmake Everest/ Tata/ Taparia , Chain Pipe Wrenches 150Mm Dia Isi Mark Make Everest/ Tata/ Taparia , Chain Pipe Wrenches 200Mm Diaisi Mark Make Everest/ Tata/ Taparia , Allen Key Complete Set Pack Of 10 1/16, 5/64, 3/32, 1/8, 5/35, 3/16, 7/32, 1/4, 5/16, 3/8 , Double Sided Open Jaw Spanner Drop Forged Chrome Plated (Fix Panna) Sizes 6X7, 8X9, 10X11, 12X13, 14X15, 16X17, 18X19, 20X22, 21X23, 24X27, 25X28, 30X32 Complete Set. Confirming To Is:2028-2004. Taparia/ Everest/ Tata Agrico Make , Hexagonal Ring Spanner Set Complete Drop Forged Chrome Plated Sizes: 6X7, 8X9, 10X11, 12X13, 14X15,18X19, 20X22, 21X23, 24X27, 25X28, 30X32 Complete Set. Confirming To Is:2029-1998. Taparia/ Everest/ Tata Agrico Make , Combination Plier 8 Inch (200 Mm) Length, Confirming To Is:3650-1981. Make Everest/ Tata/ Tapariaisi Mark , Nose Plier 200Mm Isi Mark , Screw Driver Multi 2 In 1, 250Mm Length, Confirming To Is: 844-1979. Make Everest/ Tata/ Tapariaisi Mark , Kadahi 18 Dia 10 Gauge Sheet , Chammach With Ms Rod 4 Feet Long 2.5Mm Thick , Die Set 15Mm To 25Mm Make Everest/ Tata/ Taparia , Die Set 32Mm To 50Mm Make Everest/ Tata/ Taparia , Die Set 65Mm To 80Mm Make Everest/ Tata/ Taparia , Die Set 100Mm Make Everest/ Tata/ Taparia , Pipe Viceisi 40Mm Dia Make Everest/ Tata/ Taparia Or Equivalent , Pipe Viceisi 50Mm Dia Make Everest/ Tata/ Tapariaor Equivalent , Pipe Viceisi 80Mm Dia Make Everest/ Tata/ Tapariaor Equivalent , Pipe Viceisi 100Mm Dia Make Everest/ Tata/ Tapariaor Equivalent , Belcha With Handle Of Standard Size Make Tata Or Equivalent , Chain Pulley Block, 2 Ton, 3 Meter Lift, Capacity: 2.0 Ton, Lift: 3 Meter Hand Operated Chain Pulley Block With Hook Suspension And Without Trolley, Isi Certified, Specifications As Per Is:3832/1986 With Load Test Certificate As Per Factories Act.Capacity = 2 Ton, Lift = 3 Meters Indef/ Kepro/ Bemco/ Ferreterro Make , Oil Paint As Per Required Shade Make Apolite/ Nerolac/ Asian , Bomboo 16 Feet Long 25Mm To 32Mm Dia , Bomboo 16 Feet Long 32Mm To 40Mm Dia , Wooden Primer Make Apolite/Nerolac/ Asian , Turpentine Oil (Tarpin) Make Apcolite/ Nerolack/ Asian , Painting Brush25mm Size Make Jyoti Or Wilson , Painting Brush 50Mm Size Makejyoti Or Wilson , Painting Brush 65Mm Size Make Jyoti Or Wilson , Painting Brush 80Mm Size Make Jyoti Or Wilson , Painting Brush 100Mm Size Make Jyoti Or Wilson , Painting Brush 125Mm Size Make Jyoti Or Wilson , Glender Machine 670 Watt, Arbor Size 5/ 8, Rpm- 12000 Make Bosch/ Stanley/ Planet Power Or Equivalent , Drill Machine 700 Watt,Chuck Size 13Mm, With Reverse Rotation Isi Mark Make Bosch/ Stanley/ Planet Power Or Equivalent , Hammer Machine (Concrete Breaker) Heavy Duty 3600 Watt, 65Mm Chuck Size With 2 Chisel , Blade For Glinder Machine For Cutting Metal Best Quality , Blade For Glinder Machine For Cutting Concrete Best Quality , Hydraulic Crimping Tool Wire Battery Electrical Cable Lug Terminal Hose Crimper Crimping Tool Complete Set 10Mm To 300 Mm , Plastic Bucket 15 Ltr. Make Milton/ Nayasa/ Cello Or Equivalent , Plastic Mug 1Ltr. Make Milton/ Nayasa/ Cello Or Equivalent , Plastic Glass 250Mlmake Cello Or Equivalent , Grease , Ply Board 10Mm Isi Mark , Ply Board 16Mm Isi Mark , Rapid Hardening Admixture Hardcrete 20 Liter , Phenyl White And Black (Packing Size 1 Liter Bottle) High Qualitydettol Magic/ Harpic/ Lizol/ Equivalent Make , Floor Cleaner (Packing Size 1 Liter Bottle) High Qualitydettol Magic/ Harpic/ Lizol/ Equivalent Make , Wiper 2 Feet Blade With Long Handle Cello/ Gala/ Vimal Or Equivallent Make , Wet Mop Cello/ Gala/ Vimal Or Equivallent Make , Seek Broom Milton/ Chand Suraj/ Gala Make , Phool Broom Milton/ Chand Suraj/ Gala Make , Napthalene Ball (Packing Size 1 Kg) Absorbia/ Chandan/ Tajmahal Make. , Alcohol Based Germ Killing Hand Sanitizer 5 Liter. Make Savlon/ Dettol/ Himalaya. , G.I. Wire Brush Best Quality , Washing Brush Best Quality , Gear Oil No. 40 , Gear Oil No. 90 , Black Compound , Tochan Rope 08Mm Isi Mark Make Kisan/ Texmo , Tochan Rope 12Mm Isi Mark Make Kisan/ Texmo , Liquid Hand Wash 200Ml Pump Dispenser Bottle Of Dettol/ Lifeboy/ Santoor/ Godrej Make , Liquid Hand Wash Refill 750 Ml Of Dettol/ Lifeboy/ Santoor/ Godrej Make , Hiring Of 200 Liter Capacity Water Storagedrum , Detergent Poweder Rin/ Wheel/ Ghadi/ Mr. White/ Equivalent Make , Toilet Brush Of Best Qaulity , Platic Dustbin 12 Liter Capcity Of Best Quality Milton/ Nayasa/ Cello Make , Room Freshner Sprey Bottle 200 Ml , Plastic Dust Pan Of Best Quality , Disinfectant Toilet Cleaner Bottle 500Ml Make- Harpic/ Domex/ Lizol/ Mr. Muscle Or Equivalent , Glass/ Table Surface Cleaner Spray Bottle 500Ml Make- Colin/ Lizol/ Mr. Muscle Or Equivalent , Supply Of Bathroom Air Freshner50grams Make - Odonil/ Godrej Or Equivalent , Suplly Of Mosquito Repellent Liquid Vaporizer Make- All Out/ Godrej Or Equvallent Machine With 2 Nos 45Ml Liquid , Table Cleaning Cloth (Pocha) , Supply Of Paper Glass Of 250Ml Capacity Best Quality , Supply Of Steel Jug Capacity 2 Liter. Heavy Duty. , Supply Of Transparent Glass Of 300Ml Capacity Of 6 Nos Borosil Make , Supply Of Stainless Steel Glass Holder Of Capacity To Hold Minimum 12 Glass Weight Minimum 1 Kg Approx. , Supply Of Stainless Steel Glass 250 Ml Capacity. Best Quality Set Of 06 Glass. , Supply Of High Density Plastic Tray/ Crate With Capapcity To Hold Minimum 12 Glass, Best Quality. Make Aristo/ Cello , Supply Of Plastic Chair, Medium Back With Arm Rest. Make- Nilkamal/ Cello/ Supreme , Supply Of Plastic Plate Small Size. Best Quality , Supply Of Flex/ Banner. Matter/ Content As Per Per Direction Of Engineer Incharge

BRR:7636673 Tender For Construction Work Of Bar Bhawan In Nav Yuvak Advocate Samiti Tehsil Complex Chunar - Clearing jungle including up rooting of rank vegetation grass bush wood trees and sapling of girth upto 30cm. Measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50m. outside the periphery of area cleared as per SI.No. 2.31 2 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1 3 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. (Under Floor) as per SI.No. 2.25 (a) 4 Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. as per SI no 2.27 5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per SI no. 4.1.8 6 Brick work with common burnt clay (non modular) bricks of class -150in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) as per SI No- 6.1.2 7 Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level in :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) as SI No-5.1.2 8 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Upto Plinth Lvl as SI No-5.1.2 9 Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)Above Plinth Lvl as SI No-5.2.2 10 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Upto Plinth Lvl as SI No-5.1.2 11 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). Above Plinth Lvl as SI No-5.3 12 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). as per SI No. 5.3 13 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (Slab) as per SI No. 5.3 14 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per SI. No.- 5.22 B.1 15 Brick work with common burnt clay bricks of M-150 Class in super structure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 ( 1 cement : 6 coarse sand ) as per SI no 6.4.2 16 Steel work welded in built up sections / framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc.In grantings, frames, guard bar, ladder, railing, brackets, gates and similar works as per SI no. 10.25.2 17 Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. M.S. Angle 35x35x5 for door frames as per SI no. 10.31 18 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Outer Side as per IS 13.4.2 19 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. As SI No. 11.3.1 20 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per Sl no. -13.62.1 21 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre as per Sl no. -13.41.1 Two Coats 22 Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per Sl no. -13.46.1 Two Coats 23 Centering and shuttering including stutting, propping etc. and removal of form.Beam /Band as per SI- 5.9.5 24 Centering and shuttering including stutting, propping etc. and removal of form.Column as per SI- 5.9.6 25 Centering and shuttering including stutting, propping etc. and removal of form.Foundation as per SI- 5.9.1 26 Centering and shuttering including stutting, propping etc. and removal of form.Slab as per SI- 5.9.3

BRR:7636509 Tender For General-Ground Water Dept.-Supply And Installation Of Lan In District Office, Palakkad.-General Electronics Work - Supply and installation of LAN in District Office, Palakkad.-General Electronics Work 2 OD59853/2024-2025:Supply and installation of 8 port Gigabit ethernet switch with 8 x 10/100/1000 Gigabit ports having up to 40 Gbps of switching capacity, with all necessary accessories, 3 years onsite warranty. (Preferred make: Dlink /Netgear) 3 OD6408/2024-2025:Supply and installation of 24 port patch panel ( fully loaded ) and Termination of existing UTP cables on patch panel with wire manager including all other charges. (Preferred make: Molex/DLink) 4 OD59836/2024-2025:Supply and installation of 19 inch 6 U rack for switches with covered wire manager, AC distribution box, coolingfan, lockable front door, with glass pannel etc. and all accessories. (Make: Netrack / Valrack) 5 OD6405/2024-2025:Supply and fixing of standard graded LAN IO box with spring shutter front access, single port RJ45 and making good the damages, colour washings etc (Make: Molex /D Link) 6 OD6407/2024-2025:Supply and Installation of CAT-6 , 1 meter Patch cord for inter connecting patch pannel and switch. Accepted model: Molex/ D-Link 7 OD6406/2024-2025:Supply and Installation of CAT-6 , 3 meter Patch cord for interconnecting information outlet and computers . (Preferred make: Molex/D Link) 8 1.53.1:Supplying and drawn of UTP 4 pair CAT 6 LAN cable in the existing surface/recessed steel/PVC conduit as required1 run of Cable 9 OD6411/2024-2025:Supply and Installation of ISO Certified 1 KVA/ 24V line interactive UPS with built inbatteryhaving minimum 45 minutes backup on Full Load with wall mountable accessories.Warranty: 1 year on site for UPS Recommended:V-Guard, Numeric, APC or equivalent 10 1.21.1:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.20 mm 11 1.21.2:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 12 OD6412/2024-2025:Supply and installation 802.11ax 4x4:4 Wi-Fi 6 Access Point, 3.55Gbps aggregate wireless throughput, 3.5Gbps aggregate wired throughput, Dual-band 4x4:4 MU-MIMO with DL/UL OFDMA technology, Up to 175-metercoverage range. Warranty: 3 Year. (Make: GrandStream/ Ubiquiti /Equivalent) 13 OD59806/2024-2025:Supply and Installation of dual band WiFi Router with Wi-Fi Speed Up to 867 Mbps/5 GHz + 300 Mbps/2.4 GHz, 4 antennas and 4 LAN Points. Recommended make: Tp link, Netgear or equivalent 14 OD59837/2024-2025:Supply and installation of 480 X 400 mm rack mountable powder coated steel tray for mounting new switch, existing switch and Patch panel in rack. 15 OD6487/2024-2025:Cost for Rearranging existing LAN cable through new conduit and termination of existing LAN cable to I/O ports

BRR:7636367 Supply And Installation Of Jowar Processing Unit 0.3 Tph , Supply & Installation Of Jowar Processing Unit 0.5 Tph , Multi Purpose Pre-Cleaner With Aspiration-Capacity – 0.5 Tph Grains – Jowar , Bajra , Ragi, Foxtail, Little, Kodo, Browntop, Barnyard Proso Etc. Motor- 2 Hp & 0.5 Hp , 3 Phase, Screen – Top , Bottom Outlet – 3 Sieves – Changeable (Movable) Structure – Ms Steel , Pulley – V Belt Base – Structure C Channe;, Aspiration – Blower Type, Working – Shanking Type , Size 6*3*5 Ft. , Destoner Machine (3 In 1) Capacity -0.5 Tph Motor – 2 Hp & 0.5 Hp , 3 Phase Structure – Ms Sheet , Pulley – V Belt Base – Structure C Channel , Attached Grader 2 Outlet Aspuration – Centrifugal , Size – 10*3*5 Ft , Grain Polisher - Motor – 5 Hp , Structure – Ms Sheet ,Pulley – V Belt Emery Roller Size – 5*3*5 Ft , Rawa Machine -Motor – 3 Hp , 3 Phase , Grinding Hammer Type Structure- Ms Steel, Pulley – V Belt Chamber – 12 Inches , Attached Grader With Blower Centrifugal Sieves – Changeable , Size 5*3*5 Ft , Centrifugal Grain Roster Drum - Motor – 2 Hp , 3 Phase – Gear Type. Drum Standard Steel 304 Outer Insulated , Glass Wood , Moving – Centrifugal. Gas Type Burner , Discharge – Tilting Type, Controlled Temperature Through Control Panel 5*4*5 Fit. , Dehulling Machine -Motor – 5 Hp & 0.5 Hp.Chamber – 10 Inches Model – Impeller Type 2 Stage Structure – Ms Steel Square Pipe , Pully – V Belt Round Hopper , Attached Grader 2 Outlet Sieves – Changeable , Aspiration Blower Dust Collector With Cyclone Size 8*3.5*7 Fit. , Vibration Flour Shifter 2 Outlet - Motor – 1 Hp, 3 Phase Vibration Type Size 36 Inches, Body – Standard Steel 304 Sieves Changeable (Movable) , 3 Side Outlets Vibrating Type Central Flaunch Type Motor , Digital Control Pannel & Machine Accessories- Dual Starter , Mcb, Auto Relay, Vfd Controller, Cut Off, Ams Meter, Digital Lights. , Installation And Commissioning Charges

BRR:7636343 Tender For Dd - Mumbai City-Marol (Mmr Zone- I) Industrial Area...Dc Work… Refurnishing Work Of Mitl Office At B Wing First Floor In Udyog Sarathi, Andheri - Demolition & Civil works 2 Removing doors and windows with frames and stacking thematerials as directed withall leads, lifts etc. complete. 3 Removing wooden, glass or A.C.partition including frame work and stacking the materials as with all leads, lifts etc. complete. 4 Removing false ceiling in all types of ceiling i.e. Gypsum, Accoustical, Calcium silicate board, metal etc. including stacking the materials as directed with all leads & lifts. 5 Dismantling Brick Masonry in lime or cement mortar and stacking the material as directed with all leads & lifts complete. 6 Removing the existing cement plaster with POP/Putty of any thickness without causing dust nuisance and stacking the debris upto a distance of 50 metres or spreading in the compound and cleaning the site etc. complete. 7 Removing brick bat coba including stacking the spoils as directed with all leads, liftsetc, complete. 8 Removing cement tiles, or marble or polished shahabad floor or dado or platform without bed concrete including stacking the materials as directed with all leads, lifts etc. complete 9 Dismantling old electrical fixures of all types i.e. switch boards, lights, smoke detectors etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. 10 Dismantling old sanitary fixures of all types i.e. W.C., urinals, wash basin etc. including its pipes and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. 11 Dismantling old Sprinkler Sysytem and Air condition (any types) unit indoor, out door, all types Ducting, Grills,diffuser,fastner,rods,of all types of various sizespipes Fexible pipes, etc. including its wiring and stacking of serviceable material and disposal of unserviceable material with all lead and lifts. 12 Carrying out core cutting of size 3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner and finishing the site as original. 13 Providing second class Burnt Brick masonry with conventional / I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete 14 Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1Kilogram/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 Kilogram/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 Kilogram/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years guarantee on requisite stamp paper including curing etc. complete. 15 Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 Kilogram. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete. 16 Providing and laying in position Cement Concrete 1:3:6 (one cement : 3 coarse sand : 6 graded stone aggregates of 12/20 mm nominal size). transported to site of work in Mannulfor all leads and lifts on 5th floor, having continuous agitated mixer, Mamanufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the EIC/Architect. 17 Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. 18 Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10mm thickness and confirming to IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. 19 Providing and laying 4 mm to 6.5 mm thick PVC plank flooring of approved make,made of 100% virgin PVC/ SPC backing with minimum 0.30 to 0.50 mm thick wear layer in required design and pattern in linear and curvilinear portions of the building. The planks are to be connected with glue free click connect joinery system and junction of the adjoining floors are to be finished with T or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturers specifications. The entire work is to be completed as per the direction of the EIC/Architect. 20 Providing and laying vitrified mirror / glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. 21 Providing & fixing 100% Nylon based solution dyed tufted loop pile carpet tiles of approved size, make & pattern having minimum pile weight of 600 gm per sqm and minimum pile thicknesss of 2.5 mm in flooring over smoth & damp proof base using rubber based adhesive of approved quality & make completewith T or any other approved profile of aluminum/ wooden/ S.S. of approved make as per manufacturers specifications. The entire work is to be done as per manufacturers specifications & directions of the EIC/Architect. Basic rate of Carpet: Rs.1800/- Per Sqmt 22 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm / 300 x 600 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. complete 23 Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/moulding the sharp edges wherever necessary, curing, etc. complete. 24 Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) 25 Sub Estimate No. 2 - Plumbing Works 26 Providing and fixing chlorinated Poly Vinyl Chloride (CPVC) Pipes, having thermal stability for hot and cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 mtr spacing.This includes jointing of pipe 27 15mm nominal OD pipe 28 20mm nominal OD pipe 29 Providing and fixing 15 mm dia Piller cock with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. 30 Providing and fixing European type commode including outlet, inter connections through walls including all fittings etc. complete.As per direction of Engineer - in - Charge. 31 Providing and fixing Table top white wash basin of size 120x635x405mm rubber plugs and brass chain, C.P.Angular stop cock long thread, continental including S.S. bottle trap of approved make having necessary pipe connection up to theoutside face of the wall.etc complete as directed by Engineer in charge. 32 Providing and fixing in position UPVC Nahani Trap includingSS grating,fixing in cement concrete M-15 etc. complete.. b) 110 mm. size 33 Providing and fixing soap dish with all types of fixtures including labour charges including transport charges etc. complete. 34 Providing and fixing 15 mm dia 2 Way BIB cock long body with flange,guarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge. 35 Providing and fixing Jet Spray withguarantee against any manufacturing defect including socket, union nuts etc. complete.As per direction of Engineer - in - Charge. 36 Providing and Fixing of Mirrors in TOILETS of approved Indian quality,with under layer foam (hitlon) with S.S.bracket /studs 12mm thickdia top & bottom in the masonry etc. complete.As per direction of Engineer - in - Charge. 37 Supplying, Providing and fixing in position of approved make first quality, recessed, roller type or box type white glazed toilet paper holder 150 mm x 150 mm size etc. 38 Providing and laying UPVC pipes of standard make in line and level including necessary labour, bends, tees, fixtures etc. and testing the pipes complete. 39 100 mm diameter 40 75 mm diameter 41 62 mm dia 42 Providing and fixing Chromium Plated Alluminium Towel Rail 750 mm (26) long, 20mm (3/4) dia and of approved quality fixed on chromium plared bracket including providing teak wood gutties in masonry etc complete as per direction of Engineer - in - charg 43 Providing and fixing 15 mm dia Angle cock with guarantee against any manufacturing defect including socket, union nuts etc complete as per direction of Engineer - in - charge. 44 Providing and fixing in position Double coat hooks as per instructions from EIC/Architect 45 Providing and fixing in position Hand dyrer as per instructions from EIC/Architect 46 Providing and fixing in position SS sink for kitchen / pantry as per instructions from EIC/Architect 47 Providing and fixing 15 mm dia Piller cock for Sink with guarantee against any manufacturing defect including socket, union nuts etc. complete. As per direction of Engineer - in - Charge. 48 Providing and fixing in position CP brass concealed stop-cock with adjustable wall flange etc., complete as per drawings and instructions of EIC/Architect. 49 Providing and Fixing White glazed vitreous Chinaware urinals with integrated sensor including all fittings like CP brass flush pipe, CP brass spreaders with unions and clamps (all in CP brass), CP brass waste coupling 40 mm dia, inlet connection, concealed Z CI brackets etc., all complete including cutting and making the good the walls and floors wherever required as per the architectural drawings, manufacturers specifiaction and as directed by the EIC / architect complete in all respects. 50 Providing and fixing frameless urinal partition of approved make made of 8 mm thick toughned glass. Rate includes patch fittings etc., as directed by the EIC / Architect. 51 Providing and fixing in position brass heavy duty gate valve 20 mm dia of zoloto make confirming to IS:778 with sockets, nuts and bolts etc., complete. 52 Sub Estimate No. 3 - Painting work 53 Providing & Applying Plaster of Paris Punning in average 12 to 25mm thickness to walls, ceiling, beams & columns to bring the surface in plumb Line & Level including making the surface smooth, providing required grooves on top of skirting etc. complete as per directions of Engineer - In - Charge. 54 Providing & Applying superior quality of Luster Paint of approved make & shade, using roller to get approved textured surface in 3 or more coats including preparation of surfaces, applying cement primer of approved make & shade etc. complete as per directions & manufacturers specifications & instructions of Engineer - In - Charge. 55 Providing and applying plastic emulsion paint conforming to IS:5411-1991 part I of superior quality of approved make, colour and shade to the old & new surfaces in two coats over primers, including scaffolding, preparing the surfaces to receive the paint and applying putty etc. complete. 56 Finishing with Multi surface Zinc paint After surface preparationapplyingone or more coats of zinc based coat comprising of Zinc powder mixed with suitable medium in proportion1: 2 (One part of medium : 2 parts of zinc powder)@ 2.5 litre/10 sqm or as directed by Engineer-in-Charge andone coat of special primer applied @ 0.75 ltr /10 sqm over zinc coat. Top layer with two or more coats of approved luster paint/multi surface paint @ 1.25 ltr/10 sqm including preparation of surface even and smooth etc complete as per direction of Engineer-in-Charge 57 Providing and applying wash able oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete. 58 Sub Estimate No. 4 - Carpentry Works. 59 Providing and fixingin position Aluminium Frame Work of Square hollow sections of given size for partitions, paneling, boxing, soffits etc. with vertical & horizontal members at not more than 600 mm center to center. All complete including necessary additional supports, bracing, runner etc. so that lateral movement is arrested. as per instructions of Architect. Frame work will be measured and paid as per actual measurement on site. Rates quoted shall include the cost of providing and fixing supports up to ceiling. All complete as per detail drawing, as specified and as directed by Architect. 60 Size 50 x 25 x 1.62 mm 61 Size 50 x 50 x 1.62 mm 62 Providing & Fixing in position on existing frame work including all materials, labour etc complete. Item to be completed in all respects as per drawings & instructions from Engineer - In - Charge. 63 9mm thk Marine plywood 64 12 mm thk Marine plywood 65 19 mm thk Marine plywood 66 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 30 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge. 67 Providing and fixing 3mm - 4mm thick group matching Decorative Veneer of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .The item includes finishing the surface with 3 or more coats of melamine polish, molding, lipping patti of all size etc and any material required to complete works as per the direction by Architect. (Basic Rate for veneer: Rs.180 per sft.) 68 Providing and fixing 1.5 MM thick group matching Laminate of approved quality and make, of required size and width as per site condition including surface preparation pasting with approved adhesive and finishing it evenly to get flat surface. The cost of openings for switches, AC Facia, any other cutout etc. shall be included in the rates quoted. complete as per detail drawing & directions by Architect. No extra payment will be made towards providing any pattern .(Basic Rate for laminate: Rs.55 per sft.) 69 Providing & fixing in position 460 mm deep storage / Wardrobe unit along with partitions etc with 1) sides,top,bottom shelves made out of 19 mm marine plywood 2)6 mm thk. marine ply backing panels3) Shutters made out of 19 mm thick block board &6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish / PU coating.4) Finish 1mm thk laminate inside &4mm thk veneer out side as per below mention, hardwares such as heavy duty hinges of size 100 x 19 x 25 mm, brass body locks(Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles of dia 12mm x 128mm, towerbolt 150mm etc. All exposed woodwork to be finished with 3 coats of melamine polish / PU coating & all internal surface finished with approved 1 mm thk laminate. All as per detailed drgs and instructions of EIC / Architect. Size in front elevelation will be measured for payment. 70 Full height storage with veneer finish (FST) 71 Low height storage with Veneer finish (LST) 72 Over Head Storage with Laminate finish 73 Consul-unit 450MM Deep. 74 Full height storage with Laminatefinish (FST) 75 Low height storage with Laminatefinish (LST) 76 wardrobe storage 77 Compactor 78 Storages Providing & fixing in position 460 mm deep storage/Wardrobe unit alongwith partitions etc with 1) sides, top, bottom shelves made out of 19 mm marine plywood for all inside surfaces 2) 6 mm thk. marine ply backing panels 3) Shutters made out of 19 mm thick ply finish with material & 6 mm thick teakwood leaping with egde moulding of approved profile if any shall be provided in all exposed ply edge surfaces & be finished with melamine polish. 4) hardwares such as heavy duty hinges, brass body locks (Elpro make) with extra large group key of approved quality, magnetic ball catchers, handles, towerbolt etc. All exposed woodwork to be finished with 3 coats of melamine polish & all internal surface finished with 3 coats of french polish. The exposed surfaces shall be finished with 1.5 mm thk. laminate of approved shade & colour. All as per detailed drgs and instructions of EIC / Architect. 79 Sub Estimate No. 5 -Doors & Windows Works 80 Providing and fixing in position (as per 1868/1982) Alluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 Kilogram/One Running Metre. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram/One Running Metre.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer incharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With colour Anodising with box. 81 Providing and fixing best quality superior Indian teak wood frame for doors, windows and ventilators including all moulding, rebating, jointing, hold fasts of MS flats of minimum size 20 x 3 mm, having length of 225 mm for doors & 150 mm for windows and finishing with 3 coats of French polish or one coat of primer and synthetic enamel paint in two coats as directed etc. complete. 82 Providing & fixing 35mm thk. Phenol bonded Flush door finish with one side 1.5 mm thk. Laminate and one side 3 - 4 mm thk Veneer as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. 83 Providing and fixing trap door made of aluminumpowder coated inner/outer frames/corner fittings finished with gypsum board liner,sealing strips between inner and outer frames including concealed hinges, snap touch latch etc., complete. with 50x50mm alu.frame work support from ceiling to the trap door .The entire item is to be completed in totality as per manufactures specifications and directions of the EIC/Architect. 84 Providing & fixing 35mm thk. Phenol bonded Flush door finish with 3 - 4 mm thk. Veneer on both sides as per approved pattern. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, latches etc. as required. 85 Providing & fixing door in position Partly Glazed Partly Solid door made up Phenol bonded of 35 mm thk approved flush door of approved size & 12 mm toughened glass approved beading, grooves, approved moulding including necessary hardware, approved adhesive, fitting & fixture Handel, Lock, Floor Spring etc. melamine polish to all exposed surfaces etc complete as per detail drawing as specified & as directed by Engineer-incharge. 86 Providing & fixing 35mm thk. Phenol bonded Flush door finish with 1 mm thk. Laminate on both sides as per approved designs. All edges should finish with teak wood lipping with melamine polish. All complete as per instructions & approval of EIC. Note: The rate of all doors shall include all hardware such as door handles, hinges, door closures/floor spring, dead lock, PVC door buffer, door stopper, Panic door Handel, latches etc. as required. 87 Sub Estimate No. 6 -False Ceiling 88 Providing & fixing in position Gypsum Board False Ceiling as per manufacturers specifications & instructions with 12.5mm thick Gypboard Screw-fixed to the underside of suspended G.I. grid. G.I. grid should be constructed & suspended from the main ceiling as per manufacturers instructions & specifications.G.I.grid should consist of ceiling sections at maximum centre to centre distance 450mm, Perimeter channel intermediate channels at maximum centre to centre distance 1200mm. The ceiling sections should be fixed to intermediate channels with connecting clips. G.I.grid should be fixed to R.C.C. slab above with the help of 25mm x 0.5mm strap hanger & soffit cleat. The joints between soffit cleat & strap hanger and G.I.grid & strap hanger should be with 6.4 x 12.7 mm nut & bolt. Soffit cleats should be fixed to R.C.C.ceiling with W.E. type 12mm dia, 17/16 long steel Rawl plug maximum center to center distance (both ways) of strap hangers should be 1200mm. The Gypboard should be fixed to G.I.grid with 25mm long Drawall screws. 89 Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with Optra (Microlook) EDGE TILES WITH ARMSTRONG 15mm Exposed GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ≥85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 66% GW & 74% RW%. The tile shall be laid on Armstrong Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2.Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 90 grams per M2 & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 15 year warranty. (Contractor should submit a performance certificate from Armstrong /Ecophone). 90 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, 91 Providing and fixing Wooden rafter at ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge 92 Providing and fixing Wooden ceiling at all height including providing and fixing of aluminium frame work and rafter made up of ply using9/12/19 mm with complete hardware fitting etc complete as per direction of Engineer - in - charge 93 Sub Estimate No. 7 -Loose Furniture 94 Providingandfixinginposition Meeting Room Table of approved shapeshownindrawing.Tabletop made out of 19 X 19 mm & 50 X 38 mm T.W. frame work with both side 6mm thk marine plywood in two layers finished with approved veneer. Apron made out of 50 X 50 mm T.W. frame work with both side 9 mm thk marine plywood finished with approved Veneer. Edge of Table finished with 50 X 50 mm T.W. mouldingwithmelaminepolish. Footrest&skirtingmadeoutof19 mm thk marine plywood finished with approvedVeneer.Edgeoffootrest finished with 25 mm thk wooden half roundmouldingwithmelamine polish.50x50mmwooden connectingmembers.Rateincluding cost of wooden beadings, mouldings, inlays,etc.Topshouldbefinished with approved Veneer. Sides finished withapprovedveneer&melamine polish.completeasperdetail drawing, as specified and as directed by Architect. 95 Providing & arranging in position ExecutiveCabinTableFinishedwith Veneer in table size 2500 mm x 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in19mmthk.Marineplywood includingsideunit,drawerunit,tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mminfront&12mmthkinrear& sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts&sidestobefinishedasper drawings.Thefrontmodestypanel etc shall be finished as per drawings &instructionsoftheEIC/Consultant all complete. All trays in writing desks,sideunitstohaveconcealed stoppers.Allpenciltraysshallhave smallcompartmentsforkeeping miscellaneous stationaries. All beadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching veneer all molding shall be finish in 3 coatsofmelaminepolish.Allthe tables shall have keyboard drawers to accommodatekeyboardsandmouse wherevernecessaryasperdrawing. Rateincludeofallhardware,like hinges, drawer channel, handles, lock, moulding, lipping patti etc. drawingsandalsoshallincludeCPU unit as shown in the drawings approvedbyEIC.Noseperate payment shall be made for this. Tablesallexposedsurfacefinished with a approved veneer in approved pattern as per drawings. All exposed surfaceofsideunittobefinished with a approved veneer. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, with shelves, drawers, shutters etc. as per drawings, finished with approved veneer from outside & laminate from inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With veneer of approved shade and make. Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 96 Providing&arranginginpositionJt. ExecutiveCabinTableFinishedwith Laminateintablesize2500mmx 1200 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk unitsin19mmthk.Marineplywood includingsideunit,drawerunit,tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mminfront&12mmthkinrear& sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawer unit fronts&sidestobefinishedasper drawings.Thefrontmodestypanel etc shall be finished as per drawings &instructionsoftheEIC/Consultant all complete. All trays in writing desks,sideunitstohaveconcealed stoppers.Allpenciltraysshallhave smallcompartmentsforkeeping miscellaneous stationaries. All beadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finishedwithaapprovedlaminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, withshelves,drawers,shuttersetc. asperdrawings,finishedwith approvedlaminatefromoutside& inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With laminate of approved shade and make.Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 97 Providing & arranging in position PA Cabin Table Finished with Laminate in table size 1300 mm x 600 mm x 750 mm) side table (size 900 mm x 450 mm x 700 mm) desk units in 19mm thk.Marineplywoodincludingside unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawerunitfronts&sidestobe finishedasperdrawings.Thefront modesty panel etc shall be finished as perdrawings&instructionsofthe EIC/Consultant all complete. All trays inwritingdesks,sideunitstohave concealedstoppers.Allpenciltrays shallhavesmallcompartmentsfor keeping miscellaneous stationaries. Allbeadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finishedwithaapprovedlaminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, withshelves,drawers,shuttersetc. asperdrawings,finishedwith approvedlaminatefromoutside& inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With laminate of approved shade and make.Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 98 Providing and placing in position ReceptionTableofrequiredshape andsize,vertical,topandbottom made of 19mm thk BWP marine grade plywood finished with approval Veneer on both side,the edge of top finished12x30MMthickmatching wood beading,the top finished in PU above 18mm thick glass top. The Reception table verticle,flap,Foot restarein19mmthkBWPmarine grade plywood finished with Approval Veneer internal side and external above6mmthicktoughfnedcolor back painted glass the edge of finished 12 x30 MM thick veneer matching beading. provision Flap shutter shall be provided for Services, electrical, cabling cutouts as per the drawing. All the exposed wood work are to be finished with three or more coatsmelaminepolish.Theentire item is to be completed in totality as per the drawing and directions of the EIC/Architect. 99 Providing & arranging in position Printer Table Finished with Laminate in table size 2000 mm x 600 mm x 750mm)deskunitsin19mmthk. Marineplywoodincludingsideunit, drawerunit,teatray,penciltray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawerunitfronts&sidestobe finishedasperdrawings.Thefront modesty panel etc shall be finished as perdrawings&instructionsofthe EIC/Consultant all complete. All trays inwritingdesks,sideunitstohave concealedstoppers.Allpenciltrays shallhavesmallcompartmentsfor keeping miscellaneous stationaries. Allbeadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finished with a approved laminate. 100 Providing & arranging in position Cabin Table Finished with Laminate in table size 1500 mm x 750 mm x 750 mm) side table (size 1100 mm x 450 mm x 700 mm) desk units in 19mm thk.Marineplywoodincludingside unit, drawer unit, tea tray, pencil tray, pullout tray, footrest. All drawers to be in plywood with 19 mm in front & 12mm thk in rear & sides and bottom in 6 mm thk. Plywood Internal surfaces to be laminate. Table tops, drawerunitfronts&sidestobe finishedasperdrawings.Thefront modesty panel etc shall be finished as perdrawings&instructionsofthe EIC/Consultant all complete. All trays inwritingdesks,sideunitstohave concealedstoppers.Allpenciltrays shallhavesmallcompartmentsfor keeping miscellaneous stationaries. Allbeadings,mouldings&exposed woodworktobeinteakwood.Foot restshallbemadeoutof19mm plywood frame work with 6 mm top andshallbefinishedwithmatching laminateandallmoldingshallbe finish in 3 coats of melamine polish. Allthetablesshallhavekeyboard drawerstoaccommodatekeyboards andmousewherevernecessaryas per drawing. Rate include of all hardware, like hinges, drawer channel, handles, lock, moulding, lippingpattietc.drawingsandalso shall include CPU unit as shown in the drawingsapprovedbyEIC.No seperate payment shall be made for this. Tables all exposed surface finished with a approved laminate in approved pattern as per drawings. All exposedsurfaceofsideunittobe finishedwithaapprovedlaminate. Providing & fixing in position side unit made out of 19 mm thk. Marine ply, withshelves,drawers,shuttersetc. asperdrawings,finishedwith approvedlaminatefromoutside& inside.Itemtobecompletedinall respects as per drawing & instructions from EIC. The item shall include a set of drawer and openable shutters,asperthedrawingand details. All shelves, openable shutters,drawerbox,drawerfront etc. shall be made out of 19 mm thick plywood. Drawer sides shall be in 12 mm thk Plywood. Drawer bottom shallbein6mmthk.Plywood.All exposed surfaces to be finished With laminate of approved shade and make.Allcompletewithnecessary hardware,likekeyboard,CPU,Trolly, cable manger etc complected as per drawing & approval of Engineer - In - charge. 101 Modularworkstationsconsistoflow ht. partition screen, work tops, Pedastalunit,filingstoarges(onlyin fewcases),keyboardtray&CPU trolleyasperspecifications mentionedbelow.Theprofilesofthe Aluminium partition frame should be as per the Work top - 25 mm hk. Pre laminated particle board cut to size & shapeasperdesign&drawings. Edges to be fixed with 2mm thk PVC edgebindingofapprovedmake& matching to laminate Key board tray &CPUTrolley-Eachworkstation shallhavePVCmouldedkeyboard tray&M.S.powdercoatedCPU Trolleywithcastors.Pedastalunit- 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made outof18/16mmprelaminated boardforcaracus&12mm prelaminated board for drawers. Top drawer to be on roller slides and two lowerdrawerstobeof3extens Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board andwhiteboard.Screeninfrontof the table to have frosted glass panel above 102 Modularworkstationsconsistoflow ht. partition screen, work tops, Pedastalunit,filingstoarges(onlyin fewcases),keyboardtray&CPU trolleyasperspecifications mentionedbelow.Theprofilesofthe Aluminium partition frame should be as per the Work top - 25 mm hk. Pre laminated particle board cut to size & shapeasperdesign&drawings. Edges to be fixed with 2mm thk PVC edgebindingofapprovedmake& matching to laminate Key board tray &CPUTrolley-Eachworkstation shallhavePVCmouldedkeyboard tray&M.S.powdercoatedCPU Trolleywithcastors.Pedastalunit- 3 drawer pedastal unit of overall size 450 deep X 450 wide X 725 ht made outof18/16mmprelaminated boardforcaracus&12mm prelaminated board for drawers. Top drawer to be on roller slides and two lowerdrawerstobeof3extens Partition screen: 60mm thick to have one cable channel along main spine, MFC (Melamine Finish Chipboard) on both side upto table top ,each workstation with one tackable board andwhiteboard.Screeninfrontof the table to have frosted glass panel above 103 Tea Table 900mm X 750mm X 450mm for m.s. ante chamber ProvidingAndFixingOfTeaTable 900mmX750mmX450mmWith 12mm Thick Colour Eitched Tempered GlassWithBevelledDrawingMade OutOf18mmThickWaterproofing Ply. The Outer Laces To Be Finished With High Quality 4 Mm Thik Veneer Or 1 Mm Thik Mica Etc. 104 Sub Estimate No. 5 - Chairs And Sofa Works 105 Providing & Arrangemnt of High Back,SynchronizedMechanismwith Multiple Locking, Adjustable Armrest, GasliftforSeatheightadjustment, Standard 5-prong P/Nylon Base with Leatherite Upholstery 106 Providing & arrangemnt of High back chair - tilt mechanism with multilocking, high density cushion on seatcompositeleatherwithmetallic silver finish base and arms with P.U.castors, Gaslift for height adjustment. 107 Providing & arrangemnt of High back chair - tilt mechanism with multilocking, high density cushion on seatcompositeleatherwithmetallic silver finish base and arms with P.U.castors, Gaslift for height adjustment. 108 Providing & Arrangemnt of MId Back, NormalSyncroMechanism,Fixed Armrest , Gaslift for Seat height adjustment,Standard5-prong/Nylon Base with Leather Upholstery 109 Providing & Arrangemnt of Mid Back, Normal Syncro Mechanism, Fixed Armrest, Gaslift for Seat height adjustment,Standard5-prong/Nylon Base with Leather Upholstery 110 Single Seater Lounge / Sofa in Fabric1. Varnished wooden base, skilfully crafted with finest hardwood for strength & durability. 2. Quality upholstery & fine stitching workmanship. 3. High Density Polyurethane Foam Come With Pocket Spring,toensurealonglasting Shapeofthesofa,providesoftand cushiony seating feeling and provide resilience for greater support and bestseatingcomfortevenforlong seating hours. 111 Providing & supplying multi seater sofas with teakwood internal frame out of size min. 70x40mm as mentioned in drawing with necessary spring /rubberised coir/32 density polyurethene foam/100% latex rubber foam of appropriate quality & thickness as shown in the drawing with melamine polish on all exposed wooden surface. 75mm thk. for seat & 50mm thk for back. 25mm polyurethene in it to give required shape. The rate to include upholstry material of approved velvet(fabric) on outer side & on the inner side white cloth of approved qulaity shade etc. The contractor shall use appropriate size of frame work instead of mentioned to achieve desired shape & comfort as shown. All as per instructions of Engineer-incharge. 112 Single Seater Sofa Fabric finish 113 b) Two Seater Sofa Fabric finish 114 C) Three Seater Sofa Fabric finish 115 Sub Estimate No. 9 - Miscellaneous Works 116 Supplying, Providing & fixing in position of required size pelmets / jamblining made out of 19mm thick marine plywood finished with approved finish mention below and 3 coats of French polish for inside surface as per the direction by Architect. Item to be completed in all respect as per the drawing & instruction from Architect. 117 Veneer Finish. 118 1.5 mm thk Laminate Finish 119 Providing and fixing in position 19mm thk. Marineplywood for soffit finished with below mention including 25 x 25mm thk 2nd class TW wooden frame work (including paint)/ supports & mouldings, groove. Item to be completed in all respects as per drawings & direction by Architect. 120 Laminate Finish 121 Veneer finish 122 Providing and fixing in position 12mm thk soft board panelling with approved adhesive, partition surface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect. 123 Providingandfixinginposition 12mmthksoftboardpanellingwith approvedadhesive,partitionsurface including fabric cover, wood beading finished with melamine polish of approved shade etc. complete as per drawings & directions by Architect. 124 ProvidingandsupplyingArmstrong ‘Optra Acoustical Wall Panelling’ with squareedgesmadeoffibreglass substrate25mmthickandwrapped on the front side with an acoustically transparentandfire-resistantfabric with an option of colours as per the choiceoftheArchitect/Person in-chargeofsize2100x600or 600x600mmprovidingaminimum sound absorption level of 0.90 NRC to beaffixedtowallusingWallpanel impalerssuppliedbyM/sArmstrong IndustriesIndiaPvt.Ltdand construction adhesives as per the instructionslaiddownbythe manufacturer. 125 Providing and Fixing Rollar Blinds AMI Make or approved make & shade of38mmroundAluminiumchannel withBlackoutfabric&teltingwith chain (Ball) system with all necessary fixtures and fitting etc. complete. (Sample to be final by Engineer In-charge prior execution of work) 126 The fabric shall be Pre-stressed compositematerialofHighTenacity Polyester Yarn with PVC Coating, Aluminium Backing, & Fungistatic Treatment. Fabric shall be of Soltis~B99-alu, Micro-Aerated - coated fabric to provide subtle view and should block thelightflux&offereliminationof glare and sunlight / heat radiance. Composit. Weight: 540 g/m2 (+/-5%) Thickness: 0.47 mm (+/-5%)FabricOpenessFactor:3%Visible Light Transmission: 0%(N-N) Solar Transmission : 0% Solar Reflectance : 25% - 69%Solar Absorption : 28% - 31% Tensile Strength (Warp/Weft): 160/170 daN / 5cmTearingStrength(Warp/Weft): 11/13 daN Fungistatic Treatment: Degree 0, Excellent (EN ISO 846-A) Fire Retardancy:M1/NFP92507, B1-s2,d0/EN 13501-1, CLASS A/ASTME84.ManagementQuality/ Environment – ISO 9001/ ISO 14001 Greenguard Certificate–UL2818 Gold Certification Program for ChemicalEmissionsforBuilding Materials,Finishes&Furnishings Roller Tube shall be of extruded Aluminium alloy 38mm O.D (or as per system dimension) with a minimum wallthicknessof1.0mmduly anodised for long life. Clutch shall be wrap spring design with high strength fibreglassreinforcedpolyster assembly and high carbon steel springs to transmit motion from drivingtodrivenmembersofclutch mechanism.Clutchshalloperateby directionally with the use of an endless beaded chain. Clutch mechanism shall be crash proof, prevent slippage and shall raise and lowersmoothlytoanydesired height.Clutch shall never need adjustment.Idlershallbeofhigh strength fibreglass reinforced polyster,consistingofanoutside sleeve and centre shaft. Sleeve shall provide bearing surface for roller tube androtatefreelyoncentreshaft, providing smooth, quiet and long wearing operation. Brackets shall be of tomised steel powdercoated to give superiorfinish.Bracketshall accommodateoverhead,sideorface mountingwithclutchassemblyon either end of the roller. Bottom of the blind shall be provided with aluminiumtubepowdercoatedina colourmatchingtothefabric.The fabric shall be enclosed in the suitably created pocket along with the tube.Thetubeshallbeclosedfrom sideswithendcapstogiveaneat look. 127 Providing, fixing, applying by CompanyTrainedTechnicians, premium Wall Covering (WallFabric), asperdetailsinattached specifications, or as per detailed specificationsandcoloursattached, or approved equivalent, of approved colour, texture and design, including base and sub-base preparation(on topofexistingP.O.Psurface),all complete, in a neat and workman like manner,asperdirectionsof Engineer-In-Charge. 128 Providing & fixing Artificate like ArtificalPlant,PictureFrameetc.as pershownindrawing& manufacturers specification. Picture Frame / Plant 129 Providingandfixinginposition mouldings out of T.W Moulding complete as per profile given in the detail drawing or as explained out of wooden sections of sizes given below. All should be finished with melamine polish of approved shade & color with minimum 3 coats. This item will operate only for those mouldings which are to be fixed independent of anyotheritemasmentionedinthe BillofQuantitiesandnotmeasured underanyotheritemetc.complete asperdetaildrawing,asspecified and as directed by Architect / Engineer 130 SIZE 15 X 15 MM 131 SIZE 50 X 50 MM 132 SIZE 90 X 12 MM 133 SIZE 25 X 38 MM 134 PolishingwithPUcoatingabovethe veneerwithrequiredcoatsincluding knotting,preparingthesurfaceetc complete as per direction of Engineer - in - charge. 135 Supply&Installationof3MCrystal Glass film Frosted/DUSTED/ effect with approved artwork, cut using digitalplotter.Self-adhesive, bubble-free installation to be done on clean glass , by Authorized Installers only.3M Architectural Markets. 3M interiorWarrantyforaperiodof5 years for interior application. 136 Providing and fixing modular aluminiumanodizedskirtings-1.5 mmthickness(minimum)of approvedprofilesuitablefor partitions,panellingandwalls.The profilesshallbemadefromfinest quality aluminium extrusions and anodizedminimum40micronsfor highdurabilityandcorrosion resistance including all necessary fittingsandaccessoriesfor installationasperthedirectionsof the EIC/Architect. Height 100 MM 137 6mmthkcolouredtoughened lacquered glass (back painted) 138 ProvidingSupplyingandfixining WPC (Wood Plastic Composite) fluted panels are Various colour, Shape and Sizeas per the directions of the EIC/Architect. 139 Providing,aupplying,fabricating and fixingpanel of aluminium composite panel cladding in approved shape madeout of 4mmthickACPsheet material consistingof 3mmthickFR grademineralcorefollowingNBCpart VFireandlifesafety(having2hours fireresistanceinaccordancetoASTM E119-12 and BS476 part 6 and 7 class O) sandwitched between two aluminiumsheets(each0.5mmthick of AA 5005/AA3105 grade) The aluminiumcompositepanel cladding sheetshallbecoil coatedwithkynar 500 based PVDF/Lumiflon based fluropolymer resin (having 70:30 ratioofPVDFandacrylic)coatingof approvedcolourandsg=hadeontop faceandpolymer(service)coatingof bottom face as specified using stainless steel screws,nuts,bolts,washers,cleats, weather silicon sealent,backer rods etc .overall weight of theACPshall not be less than 7.5 Kilogram/Sq.m) 140 Providing & Fixing of 6mm thk Corean Table Top with polishin of Approved make and colour as directed by Engineer in Charge. (Rates excluding GST) 141 Sub Estimate No. 10 - Electrical Works 142 LT Cables (Aluminum) (CB-LT/AL) 143 Supplying, erecting & terminatingFRXLPE insulated, galvanised steelformedwirearmoured (strip) cable,1100 V 3½ core 70 sq. mm. aluminium conductor complete erectedwithglands& lugsonwall/ trusses/pole or laid in provided trench/pipeasperspecification no. CB-LT/AL 144 Supplying, erecting & terminatingFRXLPE insulated, galvanised steelformedwirearmoured (strip) cable,1100 V 3½ core 25 sq. mm. aluminium conductor complete erectedwithglands& lugsonwall/ trusses/pole or laid in provided trench/pipeasperspecification no. CB-LT/AL 145 Bunch of Wires (WG-MA/BW) 146 Supplying & erecting mains with4x16 sq.mm FRLSH copper PVCinsulated wire laid in provided conduit/trunking/insidepole/busbars or any other places as per specification no.WG-MA/BW 147 LT Cables (Copper) (CB-LT/CU) 148 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel formedwirearmoured(strip)cable 1100 V, 4 core 10 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole orlaidinprovidedtrench/pipeas per specification no. CB-LT/CU 149 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V, 4 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in providedtrench/pipeasper specification no. CB-LT/CU 150 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V, 4 core 4 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/ pole or laid in providedtrench/pipeasper specification no. CB-LT/CU 151 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V,3core2.5sq.mm.copper conductor complete erected with glands & lugs, on wall/ trusses/ pole orlaidinprovidedtrench/pipeasper specification no. CB-LT/CU 152 Supplying, erecting & terminating FRXLPEinsulated,galvanisedsteel wire armoured (round) cable 1100 V, 2 core 6 sq. mm. copper conductor complete erected with glands & lugs, on wall/ trusses/pole or laid in providedtrench/pipeasper specification no. CB-LT/CU 153 PANELANDDISTRIBUTIONBOARDs MAINLOWTENSIONPANELGeneral Specification for Power Panels i)The Electricalpanelsshouldbeprocured from Central Power Research Institute(CPRI)approvedPanel manufacturer.ii)Electricalpanels shallbesubjectedtoMeggertests and HV tests at site in the presence of Client/ Consultant as per the requirementofClient/Consultant. iii)TheContractorshouldsubmit3 sets of as built drawings of the Electrical panels. iv)The Electrical panelsfeedersshouldbeproperly labelled using engraved black anodized labels. Also, night glow radiumlabelsshallbeprovidedfor eachfeederspecifyingthenameof the load. v)The detailed specifications missing in the BOQ should be followedfromtheSpecificationsand Electrical Single line diagram in ACAD format.vi)Contractorshouldsubmit thefabricationdrawing,singleline diagram and control logic system to Consultant for approval before fabrication of all panels. vii)The Electricalpanelsmainbody,doors, partitions should be fabricated out of 2mm thick MS steel sheet. vii)Appropriatesizeknockoutholes should be provided in the panels as perthesizeoftheincomingand outgoingcables.Designasper technical specifications and obtain approval of drawings, prior to manufacturing, manufacture, insure, pack with PVC sheets, transport to site, store, erect in proper position, testing and commissioning of Indoor DutyandhavingIP52RatingLT panel cubicle and extendible type front and back operated having Top/Bottom Bus-Bars and Top/bottom Cable/BusDuctentry,&fabricated using14gauge,CRCAsheetsteel for main frame, door and partitions, dust and vermin proof lockable doors and carrying the controlwiringusingapprovedmake FRLS colour coded Wires of minimum 2.5 sq.mm and using approved make pushonterminals.Thepanelshall be floor mounting type, all complete with interconnections by using electrolyticgradetinnedcopperBus Bars of 99.95% purity for Main, submain LT Panels and Cu/ Al busbars forotherpanels,colourcodedheat shrinkablePVCsleeves.ThePanel shall be painted with Powder Coated granularfinishedpaintingwith7 tank painting process with shade No. RAL 7032 from inside and outside all completeasperdrawings,technical specificationsandfinalapprovalof Consultant. 154 Providing & erecting floor/wall mounting,PanelBoard,withdoor, suitableforfourpoleincoming4P MCCB and outgoings up to 63A MCCBs/MCBs on iron frame, as below (Includingallrequiredcomponents, busbar, wiring, metering, cable alley etc.) Incomer : 100A, 4P MCCB 18kA Thermal Magnetic Trip Unit Busbar : 100A,TPNCopperIndicator:LED typeRYBphaseindicatorsMulti FunctionMetertoreadVAHzKW KWh PF and with suitable set of CTs, 2AconnectorwithFuseOutgoings: 40A, 4P MCB 10kA x 2Nos. 32A, 4P MCB10kAx5Nos.32A,2PMCB10kA x 3Nos. Capacitor Bank of total25 KVAR capacity in steps as (5*4 + 3+2KVAr)toworkinautomode (APFC),completewithallnecessary accessories to maintain power factor near unity. 155 LT - MCBDBs (SW-MCBDB) 156 Supplying&erectingtriplepoleand neutraldistributionboard(TPNDB), SPMCBof4ways/phase(12poles), with door, 1.2mm thickness, surface/flush mounted, IP 43 protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. 157 Supplying&erectingtriplepoleand neutraldistributionboard(TPNDB), SPMCBof8ways/phase(24poles), withdoor,1.2mmthickness surface/flush mounted, IP 43 Protection on provided iron/GI frame (horizontal busbar type) as per specification no. SW-MCBDB. 158 Supplyinganderectingsinglepole and neutral distribution board (SPNDB),with2waysforincoming and 10 ways (10 poles) for outgoing SP MCBs, with door, 1.2mm thickness surface/flush mounted, IP 43 Protection provided on iron/GI frame as per specification no. SW-MCBDB 159 LT - MCBs/ MCB Change Over Switch (SW-MCB) 160 Supplying, erecting & marking FP MCB6Ato32A,withratedshort- circuit breaking capacity (Icn) 10kA in provideddistributionboardasper specification no. SW-MCB 161 Supplying, erecting & marking FP MCB 40A to 63A, with rated short - circuitbreakingcapacity(Icn)10kA in provided distribution board as per specification no. SW-MCB 162 Supplying, erecting & marking SP MCB 6A to 32A, C-series with rated short - circuit breaking capacity (Icn) 10kAinprovideddistributionboard as per specification no. SW-MCB 163 Supplying,erecting&markingDP MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kAinprovideddistributionboard as per specification no. SW-MCB 164 RCCB / RCBO (SW-RCCB/RCBO) 165 Supplying, erecting & commissioning 2 pole RCCB 16/25A, electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. 166 Supplying, erecting & commissioning 2poleRCCB40A,electromagnetic type with 30/100/300 mA sensitivity with earth leakage trip indication complete as per specification no. SW-RCCB. 167 Supplying & erecting CRCA sheet metal one way enclosures of 1.2mm thicknesssuitableforDPMCB/TP MCB/FP MCB/RCCB/RCBO complete erected on angle iron/GI frame. 168 Supplying,fixingandcommissioning 4 pole RCBO 32/40A, with overcurrent,ratedshort-circuit breaking capacity (10 kA) and earth leakageprotection,with30/100/300 mAsensitivityandshortcircuitand earthleakagetripindicationasper specification no SW-RCCB/RCBO 169 Supplying&erectingfourpoleON LOAD change over switch, 415V, 100A, open execution having staggered termination, phase barrier, shroudterminationandterminal coveralongwithauxiliarycontacts and ready to upgrade with fuse protection kit, operational current category AC23A complying to IS/IEC 60947-3Part-1/3.(ProvisionforDG Change over) 170 Point wiring for light/bell in min. 20 mmFRLSgradeHMSConduitwith1.5 sq.mm (2+1E) FRLSH grade copperwires,modulartypeswitch, earthing and required accessories as per specification No: WG-PW/SW. (Avg. length 6 mtr. from Switch Board) 171 Point wiring for light/bell in min. 20 mm FRLS grade HMS PVCconduit with1.5 sq.mm (2+1E) FRLSH grade copperwires,modulartypeswitch, earthing and required accessories as per specification No: WG-PW/SW.(Avg. length 8 to 10 mtr. from Switch Board) 172 Point Wiring (WG-PW) 173 Secondary point wiring for additional light/bellpointinmin20mmPVC conduit with 1.5 sq.mm (2+1E) FRLSHgradecopperwirewith requiredaccessoriesasper specification no.WG-PW/SW 174 Point wiring for ceiling fan concealed type in min 20 mm HMS PVC conduit with 1.5 sq.mm. (2+1E) FRLSH grade copperwires,modulartypeswitch, earthing and required accessories as per specification no.WG-PW/CW 175 Point wiring for light/bell/exhaust fan in minimum 20 mm HMS PVC conduit with 1.5 sq.mm (2+1E) FRLSH grade copperwire,modulartypeswitch, earthing and required accessories as per specification no.WG-PW/SW 176 Pointwiringforindependentplugin minimum20mmHMSPVCconduit with1.5sq.mm(2+1E)FRLSH grade copper wire, modular type switch, earthing and required accessoriesasperspecificationno. WG-PW/SW 177 Concealing ofConduits (WG-MA/CC) 178 Supplying&erectingHMSPVC conduit20mmdia.withnecessary accessories in wall/floor with chiselling appropriately as per specification no.WG-MA/CC. 179 Supplying & laying HMS PVC conduit 20mm dia. with necessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 180 Supplying & erecting HMS PVC conduit25mmdia.withnecessary accessories in wall/floor with chiselling appropriately as per specification no.WG-MA/CC. 181 Supplying & laying HMS PVC conduit 25mm dia with necessary accessories in RCC work/false ceiling/false flooring as per specification no. WG-MA/CC. 182 Supplying&erectingHMSPVC conduit32mmdia.withnecessary accessories in wall/floor with chiselling appropriately as per specification no.WG-MA/CC. 183 Supplying & laying HMS PVC conduit 32mm dia. with necessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 184 Supplying & erecting rigid steel conduit16SWG20mmdia.with necessary accessories in wall/floor withchisellingappropriatelyasper specification no. WG-MA/CC. 185 Supplying & laying rigid steel conduit16SWG20mmdia.withnecessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 186 Supplying & erecting rigid steel conduit16SWG25mmdia.with necessary accessories in wall/floor withchisellingappropriatelyasper specification no.WG-MA/CC. 187 Supplying & laying rigid steel conduit 16SWG25mmdia.withnecessary accessories in RCC work/false ceiling/falseflooringasper specification no.WG-MA/CC. 188 Supplyinganderectingmainswith 2x1.5 sq.mm FRLSH copper PVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 189 Supplyinganderectingmainswith 2x2.5 sq.mm FRLSH copper PVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 190 Supplyinganderectingmainswith 1x2.5 sq.mm FRLSH copper PVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 191 Supplyinganderectingmainswith 2x4sq.mmFRLSHcopperPVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 192 Supplyinganderectingmainswith 3x2.5sq.mmFRLSHcopper PVCinsulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 193 Supplyinganderectingmainswith 3x4sq.mmFRLSHcopperPVC insulatedwirelaidinprovided conduit/trunking/inside pole/Bus bars oranyotherplacesasper specification No: WG-MA/BW 194 Supplying and erecting PVC insulated PVC round sheathed 2.5 sq.mm (50 no.x0.25mmdia.)3coreflexible multi stranded copper Industrial cable for voltage grade up to 1.1 kV 195 ELV Cabling (WG-ELVC) 196 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6cablesuitablefornetworking compliantwithANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC 197 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6Acablesuitablefornetworking compliantwithANSI/TIA-568.2-D standards in provided conduit/ casing-n-capping as per specification no. WG-ELVC/NC 198 Telephone,AudioandVideoWiring (WG-TW/TW) 199 Supplying & erecting 20 pair, 0.5 mm dia.jellyfilledarmouredtelephone coppercablewithpoly-allaminate moisture barrier, polythene sheathed,G.S.Tapearmouredpolythene jacketed having laid in provided trenchasperspecificationno.WG-TW 200 Telephone Accessories (WG-TW/TA) 201 Supplying, erecting & commissioning20 pairs FR junction box with moulded plastic enclosure as per specification no. WG-TA 202 Supply & laying RG 6 wire in prelaid surface/ recessed PVC conduits 203 Supply & laying RG 11 wire in prelaid surface/ recessed PVC conduits 204 Modular switches and Accessories 205 Supplyinganderectingmodular type USB Charger socket of 1 module with nominal output voltage of 5V DC±5%andnominaloutputcurrentof 5V, 2-3A, on provided plate and box with wiring connections complete. 206 Supplying and erecting modular pop up Box 8 module with provided AV/ HDMI , RJ 45,6 A electrical sockets and switch on provided table . 207 Supplyinganderectingmodular type switch 6A/10A on provided plate and box with wiring connections complete. 208 Supplyinganderectingmodular typeswitch16Aonprovidedplate and box with wiring connections complete. 209 Supplying and erecting modular type3pin6Amultisocketwithsafety shutteronprovidedplateandbox with wiring connections complete. 210 Supplying and erecting modular type 3 pin 6/16A multi socket with safety shutteronprovidedplateandbox with wiring connections complete. 211 Supplying and erecting modular type (two module) electronic step regulatorforfan,onprovidedplate and box with wiring connections complete. 212 Supplying and erecting modular typeT.V. socket single outlet on provided plate and box with wiring connections complete. 213 Supplying and erecting modular type telephone socket one gang with safety shutter on provided plate and boxwithwiringconnections complete. 214 Supplying and erecting modular type computer Jack RJ 45 with safety shutter,onprovidedplateandbox with wiring connections complete. 215 Supplying and erecting modular type bellindicatoronprovidedplateand boxwithwiringconnections complete. 216 Supplying and erecting modular type buzzer220/250Vonprovidedplate and box with wiring connections complete. 217 Supplying and erecting modular type blankingplateonemodule,on provided plate & box. 218 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor1 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 219 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor2 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 220 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor3 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 221 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor4 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 222 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor6 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 223 Supplyinganderectingunbreakable concealedtypemodularswitchbox withdoublemountingplatefor8 module duly flushed to wall with required chiselling and finishing with cement mortar / POP as per required to match the background. 224 Networking Components (WG- NWC) 225 Supplying, fixing, and configuring 24 ports, PoE switch compliant with IEEE802.3 standards with min. 193W PoE capacity with 4GE SFP uplink in provided rack as per specification no.WG-NWC/ENS 226 Networking Accessories (WG-NAS) 227 Supplying and fixing Cat 6A 24 port patch panel with keystone jacks compliant with ANSI/TIA/EIA 568.C.2 &ISO/IEC11810completeasper specification no. WG-NAS/PP 228 Supplying and fixing 12U wall mount rack (Dimension-DxWxH – 500x550x613mm)asper specification no. WG-NAS/RAK 229 Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in providedconduitswithmale/female 19pin HDMI connectors complete. 230 Indoor LED Fittings (FG-IDF/LED) 231 Supplying and erecting LED square / circular Max. 11 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuserhavingsystemlumens outputofMin.1200Lumens,min. efficacyof110lumen/W,CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f.>0.95,operatingrangeof 120-270V, surge protection of 2.5 kV, Lifeclassof50,000HrsatL70B50 including driver, having mounting arrangementwithboardforsurface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. 232 Supplying and erecting LED square / circularMax.18Wdownlighter/ PanelLighthavingpressuredie-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K,BeamAngleof120deg., max.rippleof5%,THD<10%,p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of50,000HrsatL70B0including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum2yearswarrantyasperspecification No. FG-IDF/LED. 233 SupplyinganderectingLEDPanel Light (600mm X 600mm) Max. 35 W having CRCA powder coated housing, polystyrenediffuserhavingsystem lumens output of Min 4200 Lumens, min.efficacyof120lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50includingdriver,having mounting arrangement with board for surfacetypeorspringloaded mounting clips complete with minimum2yearswarrantyasperspecification No. FG-IDF/LED. 234 Supplying and erecting decorative pre-wiredboxtypefitting/batten suitable for 4 feet, T8 LED tube light (excluding tube light). 235 Supplyinganderectinganodized aluminium mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K,BeamAngleof110deg., Ripple<5%,THD<20%,p.f.>0.95,operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specificationNo. FG-IDF/LED. 236 Supplying and erecting CRCA powder coated light LED fitting (4 feet) Max. 33Wwithhightransitivitydiffuser withsystemlumensoutputofMin. 4000lumens,min.efficacyof120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., Ripple<5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 4 kV, Life class of 50,000 Hrs at L70B50 , IP20 rated including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. 237 Supplying and erecting LED Strip lightMax.45WIP20classhaving minimum lumens output of 800 Lumens/m,min.efficacyof90 lumen/W, CRI>80, CCT upto 5000K, Beam Angle of 110 deg., THD<10%,p.f.>0.95,operatingrangeof 230-270V, Life class of 30,000 Hrs at L70B50includingdriverwith minimum1yearwarrantyasperspecification No. FG-IDF/LED. 238 DMXController5-in-1LEDlighting Control System, Easy to operate, CompatiblewithavarietyofLED drivingIC.Reliablecommunication, support WiFi wireless network transmission and real-time simultaneousdisplay.Alsocanuse internet’sremotecontroltoachieve real-timesimultaneousdisplay. Achieving synchronization/offline seamlessly switch, no need any splitter. 239 DMXloopcontrolcablesuitablefor above controller & dimmable lighting system in suitable size PVC conduit, including all accessories, support etc. 240 Supplying and erecting LED square / circular Max. 18 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1200 Lumens, min. efficacy of110 lumen/W, CRI>80, CCT upto 6500K,BeamAngleof120deg., max.rippleof5%,THD0.95, operatingrangeof120-270V,surge protectionof2.5kV,Lifeclassof 50,000 Hrs. at L70B50, including driver suitable for Dimming Purpose, havingmountingarrangementwith board for surface type or spring loaded mounting clips complete with 3 years warranty. 241 SupplyinganderectingLEDPanel Light (1200mm X 300mm) Max. 33 W having CRCA powder coated housing, polystyrenediffuserhavingsystem lumens output of Min 4200 Lumens, min.efficacyof120lumen/W, CRI>80, CCT upto 6500K, BeamAngle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50includingdriversuitablefor DimmingPurpose,havingmounting arrangementwithboardforsurface type or spring loaded mounting clips complete with minimum 2 years warranty, similar to specification No. FG-IDF/LED but suitable for Dimming application. 242 Supplying and erecting Energy Saving BLDC Ceiling fan 230 V A.C.50cycles1200mm,Max.Energy Consumptionof28Whavingservice ratio(CMM/W)ofMin.8,PF>0.9, THD<10%withIRremotecontrol, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as perspecification no. FG-FN/CF. 243 OnlineUninterruptiblePowerSupply (UPS)(AP-UPS) 244 Supplying, erecting, testing & commissioning of 10 kVA capacity on line pure sine wave,PWM,IGBT based UPSwith0.9tounityoutputpf,3 phase input & 3 phase output completewithallprotectionsasper specification no. AP-UPS(Without batteries) 245 Supplying, erecting, testing & commissioning of 3 kVA capacity on line pure sine wave,PWM,IGBT based UPSwith0.8tounityoutput pf,singlephaseinput&1phase outputcompletewithallprotections as per specification no. AP-UPS (Without batteries) 246 Batteries for Inverter & UPS 247 Supplyinganderecting12V/100Ah SMFbatterywithbatteryterminal wire, duly charged complete with 24 months warranty complete. 248 Cable Tray (CB-CT) 249 Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG (1.2 mm thick) GI sheet of 150 mm width & 20 mmheightcompletewithnecessary hardware. 250 Providing & erecting hot dipped galvanised cover suitable for ladder/perforated type Cable tray manufactured from 18 SWG GI sheet of200mmwidth&20mmheight complete with necessary hardware. 251 Supply&Installationofunderfloor Raceways,rectangularprofile& Junctionbox.Thecostshallinclude Chiselling/floorCuttingasrequired tofixtheu/fRacewayswith supporting and fixing accessories including Joint sleeves, fasteners etc. (Refilling and Making good, finish floor will be in Civil scope) 252 GI Trunking, 75mm (wide) x 38 mm (height), single compartment 253 GI Trunking, 100mm (wide) x 38 mm (height), single compartment 254 GI Junction Box with cover, Adjustable 150mm X 150mm x 65-90mm 255 GI Junction Box with cover, Adjustable 225mm x 225mm x 65-90mm 256 Supplying and erecting PVC box trunkingofsize50x50mm.with accessories on wall/ceiling as per specification No: WG-MA/BOX. 257 Supplying and erecting PVC box trunkingofsize100x50mm.with accessories on wall/ceiling as per specification No: WG-MA/BOX . 258 Intelligent Addressable Fire Alarm System (FF-AFAS) 259 Supplying, installing, testing and commissioning of micro processor based intelligent addressable main firealarmpanel,centralprocessing unitwiththe1loopcapacityand capableofsupportingnotlessthan250devicesanddetectorsperloop, with on-board LCD alphanumeric backlitdisplaysuitableforminimum 80 characters, operating at 230 V 50 Hz - AC with inbuilt Battery Backup of a minimum 24 hours in normal conditionand30minutesinalarm condition, The panel shall have suitable provision for network connectivity&compatibleforthird party integration(Open Protocol to communicate)viaa MODBUS/BACNET interface etc. conforming to IS 15908:2021, IS 2189: 2008, NFPA-72, EN 54 / VdS/FM & UL 864(10th edition) with3yearsreplacementwarrantyand inclusiveoflifetimesoftwarelicense validity, as per specification no FF-AFAS/CP. 260 Supplying, installing, testing and commissioning of Addressable Optical Photo Smoke Detector. The detector shall have multi co-operative sensing technology for faster response & avoid false alarms. The detector shall havesingle/twinbi-colourLEDfor 360degviewing.Thedetectoris conformingtoIS2189:2008, 11360_1985_Reff2020_EN 54 /VdS / UL & FM approved with 3 years equipmentreplacementwarranty,Designed to meet UL268, 7th Edition. FF-AFAS/SD. 261 Supplying, installing, testing and commissioningofintelligent addressable thermal/heat detector with fixed temperature thermistor with 0°C to 88°C temperature range, complete with base as required, single/twinLED’swith360degree view,in-builtlockingmechanismto checktheremovalandpilferageof thedetector,.DetectorShall conformingtoIS:2175-1988 reaffirmed 2000, IS 15908:2021 / EN 54 / VdS / UL & FM approved with 3 years equipment replacement warranty,DesignedtomeetUL268, 7th Edition, , as per specification no FF-AFAS/HD - ROR. 262 Supplying, installing, testing and commissioning of Addressable Multisensor/MulticriteriaPhoto Thermal(Smoke+Heat)Detector. The detector shall have twin bi-colour LED for 360 deg viewing. The intelligent multi criteria detection deviceshallincludetheabilityto combinethesignalofthethermal sensorwiththesignalofthe photoelectricsignalinaneffortto reacthastilyintheeventofafire situation.Itshallalsoincludethe inherent ability to distinguish between a fire condition and a false alarm condition by examining the characteristicsofthethermaland smoke sensing chambers and comparingthemtoadatabaseof actual fire and deceptive phenomena. Thisitemisreferredfor Non-conditioning Area conforming to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty,DesignedtomeetUL268, 7th Edition. 263 Supplying, installing, testing and commissioning of addressable fire control/relay module for AHU, Access Control,Lifts,Staircase Pressurization, Fire Suppression & otherThirdPartyOutputsetc., Module shall conforming to IS 5051 Part2(Sec1to3):1982reed relays / EN 54/VdS / UL & FM approved with3yearsequipment replacement warranty, as per specification no FF-AFAS/CRM-FCM 264 Supplying, installing, testing and commissioning of addressable fire monitormoduleforflowswitches, Panic Bars & other Third Party Inputs. Themonitormoduleshallmonitor potentialfreecontacts.Thedevice shall have an LED which shall blink in normal state & get steady on activation to monitor the health status of the device complete as required. Module shall conforming to IS 5051 Part 2 (Sec 1 to 3) : 1982Reedrelays,EN54/VdS/UL&FM approved with3yearsequipmentreplacement warranty, as per specification no FF-AFAS/MM 265 Supplying, installing, testing and commissioning of addressable fire isolatormoduleforisolatingshort/ dewired / loose circuits with automaticresettingarrangement. IsolatorBasecanalsobeproposed, howeverinthatcaseneedstobe considered with each detector & module. The device shall have an LED whichshallblinkinnormalstate& getsteadyonactivationtomonitor the health status of the device. module complete as required. ModuleshallconformingtoIS5051 Part2(Sec1to3):1982,,EN 54/VdS/UL&FMapprovedwith3 years equipment replacement warranty, FF-AFAS/ISM 266 Supplying, installing, testing and commissioning of addressable manual callpoints(breakglasstype/pull stationtype),madeofaddressable breakglassplasticsquareinshape surface/flushmounted withBreak Glassmassageembeddedonthe glass,completeerectedwith mountingbaseandrequired accessories, Module shall conform to EN 54/VdS / UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/MCP. 267 Supplying, installing, testing and commissioning of Addressable SoundercumStroberatedat minimum75dB@3mforAudible annunciation and minimum 75cd flashing at 1 Hz for visual indication. Module shall conforming to IS 2189: 2008, IS 15908:2021 / EN 54/VdS /UL & FM approved with 3 years equipment replacement warranty, as per specification no FF-AFAS/ S-ST 268 ConventionalFireAlarmSystem (FF-FAS) 269 Supplying, installing, testing and commissioning remote response indicators suitable to operate on 5 - 28VdcsupplyhavingFRPolymer ABSHousingcompleteasper specification no. FF-FAAS/RRI 270 Supplying, installing, testing and commissioningFR,XLPEarmoured cable2core1.5sq.mm.copper conductor complete erected on wall/ ceiling complete as per specification no. CB-LT/CU 271 Public Address Systems (PA) 272 Supplying, erecting, testing & commissioning Mixer Amplifier 250W RMS Power with Built-in Digital Player, MP3 Player with USB/ SD/ MMC Card Reader,Bluetoothwithremoteand having min 6 Mic & 2 Aux Inputs with Box Speaker/DriverUnitselectorswitch. Frequencyresponse50-15,000Hz ±3dB. The unit shall have Preamplifier and Line Output for connecting to a Booster Amplifierandforrecordingthe programme with Resettable circuit breaker for protection against overload and short circuit.Theunitshallhavespeaker output range of 4?, 8?/(Low Impedence) and 70V&100V/(HighImpedence)&It can instanttransfertoDCpowerifAC power fails. Signal to noise ratio between60dB to 65dB complete as per specification no. PA-MA 273 Supplying, installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 20W RMS power, with power taps on 20/10/5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response andadjustabletweetercompleteas per specification no. PA-FMCS 274 Supplying,erecting,testingand commissioning of multistrand annealed bare copperconductor,transparentPVC insulated2Cx1.5sqmmspeaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR 275 Supplying, Installing, testing and commissioningofSupercardioid professional WiredDynamicmicrophonewith noiselessmagneticreadswitch, frequency Response : 50-18,000Hz, Sensitivity : 2.5mV/Pa,Impedance:300?,with quick detachableholderwith3-pin professionalXLRconnector&10m twin core shielded low noise cable onprovided stand complete as per specification no. PA-WDM 276 Supplying & erecting Microphone table/floor stand with height 350-530 mm, base dia. min 150 mm, min. weight 1.8 kg with superior quality of chrome plating/powdercoating(resistantto rust & corrosion) having sturdy mechanism forensuringtroublefreemovement and positioning ofmicrophone complete as per specification no. PA-MTS 277 Supplying,erecting,Volumecontrol withfaceplatandconcealedmetal box for PA speaker. 278 CCTVSystems(CCTV)Cameras (CCTV-CAM) 279 Supplying&erectingofHigh definition2MegapixelIPIRBullet Camera with following features : Image Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutions,WDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 30m, Lens Type : 2.8/4/6 mm Lens, fixed focal, Field of View : 2.8 mm, horizontal FOV 107°, vertical FOV 57°, diagonal FOV 129°4mm,horizontalFOV86°,vertical FOV 47°, diagonal FOV 102°6mm,horizontalFOV55°,vertical FOV 29°, diagonal FOV 65°Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0Lux(IR)NightVisionDistance minimum IR - 30m. Camera minimum Adjustment Angles -Pan:350°,Tilt:72°,Rotate: 350°.PowerSupply:Support12VDC& PoE, IP67, IK10 - Vandal Resistant.BuiltinmicroSD/SDHC/SDXCcard slot of minimum 128 GB,Built in microphone. minimum Input/Output - Audio in × 1,AudioOut×1,Alarmin×1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance. ImageEnhancements : Day/Night-Auto(ICR)/Color/Black& White, 3D DigitalNoise Reduction, Automatic White Balance, Automatic Gain Control, Backlight Compensation,Highlight Compensation. Events : Privacy Masking, Motion detection,Scenechangedetection, Facecapture,Videotampering,audio exception detection, Region entrance detection, Region exiting detection. Operatingtemperature(-30to60° C ) .Security- User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log,TLS1.2,AES-256,SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS,TCP/IP,SecureReal-Time Transport Protocol (SRTP), Bonjour, SNMPandSecureshell(SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACH compliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting heightnotmorethan5meter)etc withallaccessoriesetccompleteas per specification no.CCTV-CAM. 280 Supplying&erectingofHigh definition 2 Megapixel IP IR varifocal Bullet Camera with following features, Image Sensor : minimum 1/2.8 Progressive Scan CMOS, Video Resolution : minimum 1920 x 1080Video Compression : H.264, H.265 or higher, at least Three individually configurable stream, Frame rate : minimum 25 fps at all resolutionsWDR : minimum 120 dB Wide Dynamic Range, ONVIF profile conformant, minimum IR distance : 50m, LensType:2.8-13mmLens, auto/motorized varifocal focal, Field of View :horizontal FOV 103° to 32°, vertical FOV 73° to 24°, diagonal FOV 142° to 40° Lux sensitivity - minimum 0.2 Lux at color, minimum 0.05 Lux at Black & White, 0.0Lux(IR)NightVisionDistance Min IR- 50m, Camera minimum Adj ustment Angles -Pan:350°,Tilt:72°,Rotate: 350°. PowerSupply:Support12VDC& PoE,IP67, IK10 – Vandal Resistant. BuiltinmicroSD/SDHC/SDXCcard slot of min 128 GB, Built in microphone. minimum Input/Output - Audio in × 1, Audio Out × 1, Alarm in× 1, Alarm Out × 1. Image Settings : Rotate mode, saturation, brightness, contrast, sharpness, gain, white balance.ImageEnhancements:Day/Night- Auto (ICR)/Color/Black & White, 3D Digital Noise Reduction, Automatic WhiteBalance,AutomaticGain Control, BacklightCompensation,Highlight Compensation.Events : Privacy Masking, Motion detection,Scenechangedetection,Face capture,Videotampering,audio exception detection, Region entrance detection, Region exiting detection. Operatingtemperature(-30to60° C ) . Security - User account and password protection, HTTPS, IP filter, IEEE 802.1X, digest authentication, user access log, TLS1.2, AES-256, SSH/Telnet closed, FTP disabled. Protocol - DHCP, UDP, HTTP, HTTPS, NTP, DNS, RTP, RTSP, SMTP, SSL/TLS,TCP/IP,SecureReal-Time Transport Protocol (SRTP), Bonjour, SNMPandSecureshell(SSH) supported protocol. RoHS, WEEE, ISO-14001 and REACHcompliant, UL/EN OR equivalent BIS/TECH/STQC or any indian standards as applicable, CE, FCC certified. duly erected in position on wall/ceiling/false ceiling/provided pole (mounting heightnotmorethan5meter)etc withallaccessoriesetccompleteas per specification no. CCTV-CAM. 281 Supplying, installing, testing & commissioningof8/10Ch.Network Video Recorder(NVR),suitablefor2MP cameras only with HDMI/VGA outputs provided HDMI output of 4K resolution or VGA output with output up to 1920x1080. Support H.265 or higher, H.264, MJPEG,Incoming Bandwidth 80Mbps with minimum 2 SATA Hard Disks,ANR Technology, 2SATAinterfacesfor2HDDsand capacity of each HDD up to 8TB, minimum02USBport,AlarmI/O 4/1, RJ-45 10 /100/1000 Mbps self-adaptive Ethernet interface, supportmultibrandnetwork Cameras, ONVIF conformance, Multiple network monitoring: Web viewer . support protocol TCP/IP, DHCP, DNS, DDNS, NTP, SADP, SMTP, NFS, iSCSI, UPnP™, HTTPS. RoHS, UL, CE, FCC certified. duly erected in provided U Rack with wiring connections, tagging and programmingetccompleteasper specifications no. CCTV-NVR 282 Supplying&erecting4TBinternal SurveillanceHDDsuitableforSATA Port of NVR, interface transfer rate 6 GB/S,Maximumsustainedtransfer rate 150MB/Secto180MB/S.Drivebay supported08+,Camerassupported up to 64, Cache (MB) 64, Load/Unload Cycle-3000000,WorkLoadRating per Year 180TB,MTBF1000000Hrs.HTTPS. RoHS, UL, CE certified, duly erected in position in provided NVR as per specification no. CCTV-HDD 283 Supplying & erecting 32 professional LED Monitor with 1920*1080 (Full HD) Display, suitable for 16 channel NVR and following features Brightness: minimum 250 Cd/m2 Contrast Ratio: minimum 1000:1 Viewing angle: 178/178 deg. Response time: maximum 8 ms Inputs: HDMI, VGA, BNC, USB, Audio In, Built-in speakers maximum 2 W, Suitable to operate on 100-240 V 50 HzACsupplyand24/7DutyCycle dulyerectedonwallortabletopwith standard accessories like wall mount stand and wiringconnectionsetc.completeas per specifications no. CCTV-MON 284 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6 armoured cable suitable for networking compliant with ANSI/TIA-568.2-Dstandardsasper specification no. WG-ELVC/NC 285 Supplying and erecting 6 fibers LSZH armoured multimode optical fiber cable with, core dia 50/125 µm (OM3),suitableupto10GBPS, complianttoIEC60793/IEC60794 standards,onwall/ceilingorlaidin providedpipe/trenchasper specification no. WG-ELVC/OFC 286 Supplying, fixing, and configuring 8-ports managed gigabit, layer-2 switch, 10/100/1000 base-T, PoE smartswitchplus2SFPerectedin providedrackcompliantwithIEEE 802.3 standards complete. 287 Supplying, Installing, Testing & CommissioningofRodentRepellent system consisting of the following: 288 TransducersAbove/BelowFalse Ceiling (approx coverage area 150sq.ft) 289 TransducersBelowFalseCeiling (approx coverage area 300sq.ft) 290 DigitalTypeMicroprosserbased MasterControllerwithGraphicLCD display for controlling the parameters suchaswavespeed,wavedensity, frequency,Transducertesting.The controller should support upto 20 transducers in dedicated connection & 24transducersinsingleloop @300/150sq.fteach.Thecontroller shall be networkable on RS 485 havingfacilitytosupportHardwired Third Party BMS integration via Modbus. The system shall use UL and CE approved transformers for power supply. 291 Testing,Commissioning& Verification Kit comprising of UltrasoundWave Analyzer (Software and Hardware) that can do the following: a. Capture,Record and Report (in pdf format) One Third Octave Ultrasound BandFrequenciesemittedfromthe transducers thereby ensuring HUMAN SAFETYasperIRPA(International Radiation Protection Association, Geneva) Guidelines. b. Capture,Record and Report (in pdf format) ultrasound output from each transducerdepictingindividual frequencypeaksalongwith corresponding sound pressure levels, current operating band and the Controller Name for verifying the product. 292 Supplying and installing FR PVC sheathedHDPEinsulatedcopper cat-6cablesuitablefornetworking compliantwithANSI/TIA-568.2-D standards in provided conduit/casing-n-capping as per specification no. WG-ELVC/NC 293 Supplying, Installation & commissioning of Sony make 85” 4K LEDTVhavingmodelno. FW-85BZ40H with bracket and proper installation etc. complete, as per directionofengineer-in-charge. (Rates Excluding GST) 294 Supplying, Installation & commissioning of Sony make 65” 4K LEDTVhavingmodelno. FW-65BZ30J with bracket and proper installation etc. complete, as per directionofengineer-in-charge. (Rates Excluding GST) 295 Supplying, Installation & commissioning of Sony make 43” 4K LEDTVhavingmodelno. FW-43BZ30J with bracket and proper installation etc. complete, as per directionofengineer-in-charge. (Rates Excluding GST) 296 Supplyinganderectingmodularpop up Box 8 module with provided AV/HDMI , RJ 45,6 A electrical sockets and switch on provided table 297 Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in providedconduitswithmale/female 19pin HDMI connectors complete 298 Sub Estimate No. 11 - Fire fittings System 299 Pipes (FF-PP) 300 Supplying and erecting G.I. pipe ‘C’ class ERW 20 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 301 Supplying and erecting G.I. pipe ‘C’ class ERW 25 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 302 Supplying and erecting G.I. pipe ‘C’ class ERW 32 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 303 Supplying and erecting G.I. pipe ‘C’ class ERW 40 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 304 Supplying and erecting G.I. pipe ‘C’ class ERW 50 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 305 Supplying and erecting G.I. pipe ‘C’ class ERW 65 mm dia with necessary fittings duly painted with two coats of syntheticenamelpaintoffirered colouroveracoatofprimer(ISC code536asperIS2932of2003) complete as per specification no. FF-PP 306 Supplying and erecting G.I. pipe ‘C’ class ERW 75/80 mm dia with necessaryfittingsdulypaintedwith twocoatsofsyntheticenamelpaint offireredcolouroveracoatof primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP 307 Supplying and erecting G.I. pipe ‘C’ classERW100mmdiawith necessaryfittingsdulypaintedwith twocoatsofsyntheticenamelpaint offireredcolouroveracoatof primer (ISC code 536 as per IS 2932 of 2003) complete as per specification no. FF-PP 308 Supplying and erecting 100 mm dia. castirondoubleflangesluicevalve complete with PN16 pressure rating, as per specification no. FF-VL/SV 309 Valves (FF-VL) 310 Supplyinganderecting50mmdia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV 311 Supplying and erecting 100 mm dia. cast iron double flange butterfly valve of size complete with PN16 pressure rating, as per specification no. FF-VL/BFV 312 Supplyinganderecting75/80mm dia cast iron double flange ball type NRVcompletewithPN16pressure rating, as per specification no. FF-VL/NRV 313 Supplying and erecting 100 mm dia cast iron double flange ball type NRV complete with PN16 pressure rating, asper specification no. FF-VL/NRV 314 Supplyinganderecting75/80mm diaCastIronendlinestrainerof Y-type flanged end pattern, PN16 pressure rating, SS screen, end connection with Flanged / Screwed / Socket Weld / Butt Weld End etc with standardOAR(openareaRatio)for positive suction complete as per specification no. FF-VL/ELS 315 Supplying and erecting 100 mm dia Cast Iron end line strainer of Y-type flangedendpattern,PN16pressure rating,SSscreen,endconnection withFlanged/Screwed/Socket Weld / Butt Weld End etc with standardOAR(openareaRatio)for positive suction complete as per specification no. FF-VL/ELS 316 Supplyinganderecting25mmdia gun metal gate valve complete with PN16pressurerating,asper specification no. FF-VL/GV 317 Supplyinganderecting50mmdia gun metal gate valve complete with PN16pressurerating,asper specification no. FF-VL/GV 318 Sprinklers (FF-SPR) 319 Supplying,erecting,testingand commissioningofUpright/Pendent quartzoid bulb sprinkler, 15 mm (½) dia. NBCM Body chrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR./UP 320 Supplying,erecting,testingand commissioningofhorizontalsidewall quartzoid bulb sprinkler,15 mm (½) dia quartzoid bulb. NBCM Body chromefinished,68ºCfixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/SS 321 Supplying,erecting,testingand commissioning of concealed quartzoid bulb sprinkler, 15 mm (½) dia quartzoidbulb.NBCMBodychrome finished, 68º C fixed temperature rating with deflector disc of conventional construction complete as per specification no. FF-SPR/CON 322 Supplyingerecting,testingand commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximumworkingpressureof175 PSI test pressure of 875 PSI (Burst) withbranchline(Inlet)25mmNPT malethreadtosprinklerhead (Outlet)15mmNPTfemalethread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1000 mm size (UL Listed) complete as requiredas per specification no. FF-SPR/FHP 323 Supplyingerecting,testingand commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximumworkingpressureof175 PSI test pressure of 875 PSI (Burst) withbranchline(Inlet)25mmNPT malethreadtosprinklerhead (Outlet)15mmNPTfemalethread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1200 mm size (UL Listed) complete as required as per specification no. FF-SPR/FHP 324 Supplyingerecting,testingand commissioning of sprinkler flexible pipe of stainless steel complete with 15 NPT on reducer thread with maximumworkingpressureof175 PSI test pressure of 875 PSI (Burst) withbranchline(Inlet)25mmNPT malethreadtosprinklerhead (Outlet)15mmNPTfemalethread with reducer, nipple, 2 side brackets, center bracket, stockbar of 1500 mm size(ULListed)completeas required as per specification no. FF-SPR/FHP 325 Fire Fighting Accessories (FF-FFA) Priming Tank 326 Supplying and erecting 100 mm dia. pressure gauge , 0-300 PSI or 0-14 kgpercmsquarefittedwith12/15 mm dia. pad cock valve, erected with providedG.I.pipe,elbowetc. complete as per specification no. FF-FFA/PG 327 Supplying and fixing of self expanding,readytouse polyurethane(PU) foam sealant of minimum750mlbottle,suitableto sealtheopeningsofallkindsof cables, pipes and cable support system in steel, aluminium and plasticprofiles(excepthollowcore conductors).Sealantshallhave minimum2hourfirerating, conforming to EN 1366-4:2021 as per specification no FF-FRS. 328 Fire Extinguishers 329 Supplying & erecting Carbon Dioxide (CO2)fireextinguisherof4.5kg. capacity cartridge type conform to IS 2878/15683completeerectedwith necessaryclampmadefrom50x6 mm. M. S. flat with nut & bolts routed in wall complete. 330 Clean Agent Fire Suppression System (FF-FSS) 331 Supplyingerecting,testingand commissioning of Direct Low Pressure (DLP),automaticelectricalcabinet fire suppression system kit comprises of the mild steel cylinder, hydraulic tested to 30kg/cm2tocheckforleakages& burst pressure above 110kg/cm2. duly hot phosphate & epoxy powder coated internally and externally more than65micronsorpaintedwith1 coatofprimerand2coatsofred enamelpaintallcomplete.The Cylinder assembly is filled with 4 kg to 4.54 kgs of clean agent gas (FK-5-1-12 UL listed) and pre-pressurized to 15/16 Bar having storage & operating temperature rangeof(-)17.8deg.Cto54.4deg.C withallimportantaccessoriese.g. brassassemblyvalvewithpressure gauge, end of line plug with pressure gauge suitable to connect with provided Linear heat detection tube, completewithmountingbracket assembly,requiredsizerubber grommets,plasticloopclamps, pressureswitchandcaution& cylinder Labels etc. 332 ABC type fire extinguishers of 6 kg. capacity having IS certification mark shall be provided & spread over each floor 333 Removal of Existing (non suitable piping&sprinklersfornewInterior Plan)Sprinklersystem,completein allresepctsforproposedrenovation area. 334 Sub Estimate No. 12- HVAC Works (High Side & Low Side) 335 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.4TR (512 cfm) to 2.0TR (618 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete.The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (MD -2 & Meeting Room -2) 336 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 1 way cassetteroom/indoor unit (IDU-compact / standard size) of nominal cooling capacity 1.0TR (441 cfm) to 1.3TR(512 to 530 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation. (Jt.MD Cabin-2, Waiting area-1) 337 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassetteroom/indoor unit (IDU-compact/standard size) ofnominal cooling capacity 1.0TR (441 cfm) to 1.3TR (512 cfm) having EER as per BEE standards andspecifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDUwith drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, andfresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, ACsupply complete. The unit consisting with any additional refrigerant and oilcharge as per requirement during installation. (Ante Room, Serverroom) 338 Supply, installation, testing andcommissioning of VRF/VRV based ceiling suspended 1 way cassette room/indoor unit (IDU-compact / standard size) of nominal cooling capacity 0.6TR (420 cfm) to 0.8TR (441 cfm) having EER as per BEE standards and specifications, suitable as per site requirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anticorrosive coating suitable for costal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil charge as per requirement during installation.(PA Cabin-1 & Typical Cabins-1) 339 Supply, installation, testing and commissioning of VRF/VRV based ceiling suspended 2 Way cassette room/indoor unit (IDU-compact/standard size) of nominal cooling capacity 1.0TR (441cfm) to 1.3TR (512 cfm) having EER as per BEE standards and specifications, suitable as per siterequirement with swing louvers and adjustable blades from sides. IDU with drainage arrangements, fan, refrigerant liquid and refrigerant piping, cordless remote control, and fresh air port etc. IDU shall have anti corrosive coating suitable for coastalarea in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oilcharge as per requirement during installation. (Server area) 340 Supply, installation, testing and each commissioning of VRF/VRV based Hi-wall type room/indoor unit (IDU) of nominal cooling capacity 1.0TR (358 cfm) to 1.25TR (417 cfm) having EER as per BEE standards and specifications with multiple speed evaporator fan with motor, copper tube aluminium fin evaporator coil, washable air filter, insulated drain tray, in built drain pump, expansion device, cordless remote control with necessary controls and electrical terminal to receive power supply, etc. IDU shall have anti-corrosive coating suitable for coastal area. Unit shall be of decorative slim dimension suitable indoor wall mounting. The indoor unit shall also have an electronic control console. The unit shall be suitable for wall mounting and provided with suitable mounting brackets with any additional refrigerant and oil charge as per requirement during installationcomplete. (Printer Area) 341 Supply,installation,testingand commissioning of VRF/VRV based ceiling suspended 2Waycassette room / indoor unit (IDU-compact/standardsize)of nominal cooling capacity 1.4TR (512 cfm) to 1.7TR (618 cfm) having EER as per BEE standards and specifications,suitableaspersite requirementwithswinglouversand adjustablebladesfromsides.IDU with drainage arrangements, fan, refrigerantliquidandrefrigerant piping,cordlessremotecontrol,and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil chargeasperrequirementduring installation. (Reception-1 & Staff Area-5) 342 Supply,installation,testingand commissioning of VRF/VRV based ceiling suspended 4Waycassette room/indoor unit (IDU-compact/standardsize)of nominal cooling capacity 2.6TR (918 cfm) to 2.8TR (1100 cfm) having EER as per BEE standards and specifications,suitableaspersite requirementwithswinglouversand adjustablebladesfromsides.IDU with drainage arrangements, fan, refrigerantliquidandrefrigerant piping,cordlessremotecontrol,and fresh air port etc. IDU shall have anti corrosive coating suitable for coastal area in all respects suitable to operate on 1-phase, 230V, 50Hz, AC supply complete. The unit consisting with any additional refrigerant and oil chargeasperrequirementduring installation. (Lobby Area-Stilt Floor) 343 Supplying,erecting,testingand commissioning of 18HP, VRF/VRV air conditioning system outdoor unit (ODU) complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable greenequivalentrefrigerant,for minimum cooling capacity as delivering100%capacityat47° C, non stop cooling even at 56° C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air dischargesuitableforlongerpiping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRVtechnologymicroprocessor basedcontrol compressor starter/controlpanelwithscroll compressor, air cooled copper condensercoilofsuitableshapefor increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver,coppertubealuminiumfin aircooledcondenser,condenserfan withmotorsuitablefor415V±10%, 50Hz,3phasepowersupply(all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housedinpowdercoatedweather proof cabinet complete. 344 Supplying,erecting,testingand commissioning of 22HP, VRF/VRV air conditioning system outdoor unit (ODU)complies type-IV OEM standards working on HFC refrigerant R410A or other required/suitable greenequivalentrefrigerant,for minimumcooling capacity as delivering100%capacityat47° C, non stop cooling even at 56°C and coefficient of performance (COP) 3.00 to 4.00, modular type vertical hot air dischargesuitable for longer piping range upto 1000 metre operation in cooling mode with inverter/digital VRF/VRV technologymicroprocessor based control compressor starter / controlpanelwithscroll compressor, air cooled copper condensercoilofsuitableshapefor increasing maximum heat transfer area, rain protection cover, built in oil separator, accumulator and oil receiver, coppertubealuminiumfin aircooledcondenser, condenserfan withmotorsuitablefor415V±10%, 50Hz,3phasepowersupply(all suitable for high ambient conditions), internal copper refrigerant piping, internal wiring and refrigerant, etc. all housedinpowdercoatedweather proof cabinet complete. 345 Supplying and installation of high pressuregraderequiredsizecopper connection Y or T- Joints/refnet complete erected on wall/ceiling with supports/raceways,Nitrilerubber insulation, painting etc. with brazing andtestingforleakagesconfirming the normal operation of the VRV/VRF air conditioning system. 346 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerantcopperpipeof28.6mm dia(OD)forliquidline/suctionline supplyandreturnpipingofsuitable gauge(hardcopperpipeforliquid mainlineandsoftcopperpipefor refrigerant) along with necessary supports,hangers,clamps,vibration isolators and fittings such as bends, tees,valves,gauges,strainerswith insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread,waterpermeanceandultra violet radiations with OEM standards ofVRV/VRFairconditioningsystem complete. 347 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerantcopperpipeof15.9mm dia(OD)forliquidline/suctionline supplyandreturnpipingofsuitable gauge(hardcopperpipeforliquid mainlineandsoftcopperpipefor refrigerant) along with necessary supports,hangers,clamps,vibration isolators and fittings such as bends, tees,valves,gauges,strainerswith insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 348 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerantcopperpipeof12.7mm dia(OD)forliquidline/suctionline supplyandreturnpipingofsuitable gauge(hardcopperpipeforliquid mainlineandsoftcopperpipefor refrigerant) along with necessary supports,hangers,clamps,vibration isolators and fittings such as bends, tees,valves,gauges,strainerswith insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 349 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerant copper pipe of 9.5 mm dia (OD) for liquid line/suction line supply andreturnpipingofsuitablegauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) alongwithnecessarysupports, hangers,clamps,vibrationisolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 350 Supplying,laying/fixing,testingand commissioning of appropriate nominal refrigerant copper pipe of 6.4 mm dia (OD) for liquid line/suction line supply andreturnpipingofsuitablegauge (hard copper pipe for liquid main line and soft copper pipe for refrigerant) alongwithnecessarysupports, hangers,clamps,vibrationisolators and fittings such as bends, tees, valves, gauges, strainers with insulation of 19mm thick elastomeric nitrile rubber along with application of multicoatingofVRV/VRFpipingfor protection against mechanical damages,fungalgrowth,flame spread, water permeance and ultravioletradiationswithOEM standards of VRV/VRF air conditioning system complete. 351 Supply, Installation, Testing & Commissioning of Rectangular shape SoundAttenuatorswithhighquality galavlanized sheet of min 22 G includinghighqualityperforated galvanizedsteelsheetsplitters/ baffles with Inorganic, fire resistant, vermin and moisture proof sound absorbent rock wool of 50kg/m³ density, with liner, duct connections to be made with required slip on PVC jointssizeofattenuator600mmx 450 mm x 150 mm 352 Supply & Installation of Factory Pre-cutSMARTPre-InsulatedINDUS PIR Panels complete CFC & HCFC Free 17mm thick with 80 micron Embossed Aluminium foil (Anti microbial, Anti fungal, Anti corrosion and UV Protection coating) on outer sidesandFSKfoilininternalsides withclosecellnotlessthan95% Rigid Cellular foam insulation of thickness (17mm for Internal Ducting) and material shall be Class O as per BS 476 Part 6 & Part 7 with 2 hours fire rating, with Density of 45± 3 kg/m3 and should have Thermal Conductivity0.023W/mK,Water absorptionshallbenotmorethan 0.03% as per EN 13403 standard and panel should be GreenPro , GRIHA & EPD&SGBCcertifed.Theductwork shouldbecapableofhandling pressures upto 2000 Pascals. The joint between the ducts shall be with Polymerslideintypejointbetween the ducts and all other polymer accessories to be of the same manufacturer. Measurement would be done on outer to outer. Supporting of ThreadedRod(6mm)&CChannel/ Wire supporting of reputed make recommended by Manufacturer to be provided.Manufacturertohave experience of more than 10 years of producing the same material in India. (Approved Makes : Asawa Insulation,AURA, P3) 353 For Duct sizes below 1200 mm (Ducting in Rectangular shape, above false ceiling areas) 354 Supply, installation of GI ducting work with necessary mounting supports as per SMACNA Standards 355 22 Gauge 356 20 Gauge 357 Drain piping: Providing and fixing of 25mmDiaHardPVCdrainwater piping with fittings, support and insulated with 6mm thick closed cell elastomericnitrilerubberinsulation complete as per specifications 358 Outdoor Stand Fabrication for OutdoorSplitUnits:Supply, fabrication and erection of Angle/channel/Flat iron stand, hangingarrangementforair conditioningmachinesincludingnut bolts of required size, making holes, fabrication, welding, cutting, etc. and paintingwithonecoatofredoxide paint & two coat of enamel paint as required as per specifications. 359 Bunch of Wires (WG-MA/BW) 360 Supplying and erecting PVC insulated PVCroundsheathedFR2.5sq.mm (50 no. x 0.25mm dia.) 3 core flexible multi stranded copper industrial cable for voltage grade up to 1.1 kV 361 VRV/VRF Air conditioning 362 Supplying, erecting, testing & commissioning fresh air intake system, ductable circular inline fresh air fan inlet unit having 300cfm capacitywithmaintainingthestatic pressure minimum 20mm suitable to operate on 1 phase, 230V, 50Hz, A.C. supply complete. 363 Existing wall /Core cut outs and otherassociatedworktoinstallref net piping from IDU to ODU complete is all respects 364 Carryingoutcorecuttingofsize3 to 5 dia x 15 length in the C.C./rock/stone wall with the help of specializedcorecuttingmachinein proper manner and finishing the site as original. 365 Supply,installation,testingand commissioningwirelessremote control having colour LCD panel, real time clock, temperature limitation (16 to30°C,functionslikefilterclean reminder timer suitable to communicate with wired controller complete. 366 Sub Estimate No. 13 -Structural strengthening of parking slot slab 367 Chipping of all loose and Spalling of concretetobottomofslab,beams etc.(whereverrequired),cleaningof reinforcement, carrying out thorough sandblasting,applicationof anti-corrosive zinc rich epoxy primer toexposedreinforcementincluding costofmaterial,labour,equipment, tools, scaffolding etc. complete. 368 Providing and applying one pack bondingcoatbetweenconcrete memberslikeRCCslabs,columns, beams,chajjas,pardisetcand cement mortar plaster using Hack Aid Plast of approved make & approved byEngineerincharge.Cleanthe concrete surface thoroughly to remove dust, dirt, grime, deshuttering oils and rub down to a cleansurface.ApplyHackAidPlast ofapprovedmake&approvedby Engineerinchargebysprayonthe entireconcretesurface.Providea leancement-sanddashcoatover the same. Allow the dash coat to set foraround24hours.Further plasteringasperspecificationscan continue. 369 ProvidingRepairingofhoneycombs and minor damages with Polymer ModifiedMorterincluding material,labour complete in all respect. 370 P/fixing of carbon 100 mm x 1.4 mm carbon laminate with adhesive includingofallmanpowerand equipments complete in all respect 371 Providingsandfacedplaster externallyincementmortarusing approvedscreenedsand,inall positions including base coat of 15 mmthickincementmortar1:4 using waterproofing compound at 1Kilogramper cement bag curing the samefornotlessthan2daysand keepingthesurfaceofthebase coatroughtoreceivethesand faced treatment 6 to 8 mm thickin cement mortar 1:4 finishing the surfacebytakingoutgrainsand curing for fourteen days scaffoldingetc.complete. 372 Providing and applying two coats of exterior acraylic emulsion paint confirmingtocorrespondingI.S.of approved manufacture andof approved colour to the plastered surfaces including cleaning, preparing the plaster surface, applyingprimer coat ,scaffolding if necessary , and watering the surface for two days etc complete. 373 Epoxy for joint sealing of tiles 374 Sub Estimate No. 14 - Architectural Consultancy charges 375 Preparing layout, drawings, plans, detail drawings, colour combinations, sample chart preparation etc. All designing work required for the work including the preparation of electrical layout all complete.

BRR:7636286 Supplaying Electrik Material At Kasurdi Kheba Material , Pvc Cfl Holder , Procelin Holder 2 Slot , Pendent Holder , Anchor 5A Switch , Anchor 5A 2 In 1 Socket , G.I Pipe 1 - 2 , Anch Fan Regulator , Pc 32A Dp Switch , Kitkat Fuse 16A , Kitkat Fuse 32A , Kitkat Fuse 63A , Kitkat Fuse 100A , Kitkat Fuse 200A , Service Insulator , Wire 1.0*2 Core Cu Flex , 1 Sqmm Wire , 2.5 Sqmm Service Wire , 4 Sqmm Service Wire , 6 Sqmm Service Wire , 10 Sqmm Service Wire , 25 Sqmm * 3.5 Alu Armd Cable , Gi Wire , Led Lamp 20W , Led Lamp 45W , Contractor , Streetlight Timer , Led Streetlight 30W , Led Streetlight 36W , Led Streetlight 40W , Led Streetlight 50W , Led Chip 50W / 48W , Led Chip 36W , Led Driver 36W , Led Driver 48 / 50W , Pcb 30W , Halonix Led Lamp 20W , Led Batten 22W , Pvc Tapes , Lugs 95Mm , Plier 8 Taparia , Taparia Tester 813 Yellow , Screw Driver Taparia , Mccb 100/3 Pole , 7 Meter Ms Pole With Bracket , 9 Meter Ms Pole With Bracket , 9 Meter G.Ioctagonal Pole With Bracket , Mcb 6 - 32 A Single Pole , Mcb 16 - 32 A Double Pole , Mcb 32 - 40 A Three Pole , Mcb 63 A Three Pole , Mcb 40 - 63 A Four Pole , Mcb Box 1 - 2 Way , Mcb Box 4 Way

BRR:7636244 Comprehensive Maintenance And Certain Misc B/R Works In Tech Area At Af Stn Palam Under Ge (Af) Palam, Delhi Cantt - 10; 1.00 Taking down cement plaster on brick, stone or concrete surfaces of walls etc incl racking out joints hacking for key scrubbing down with water etc and removing the debris from site to out site MoD Land complete all as specified and directed by Engr-in-Charge . 2.00 M&L for 10mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equilent. 3.00 M&L for 15mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on external walls, finished the surface even and fair without using extra cement by using Dr. fixit (WPC) @ 3% of wt of cement content complete all as specified and as directed. Note:- Water proofing Compound shall be measured and paid seprately. 4.00 M&L for 5mm thick cement plater of Ready Mix Mortar of approved make as on ceiling & plastering to be finished even & smooth without using extra cement complete all as specified and as directed. Make- Birla (HIL) or its equilent. 5.00 Supply only Integral water proofing compound complete all as specified and as directed. 6.00 M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed 7.00 M&L for applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10 sqm over new surfaces complete all as specified and as directed. 8.00 M&L for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper over a coat of alkalic resistent primer complete all as specified and as directed. 9.00 M&L for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed. Note:- Payment for providing grooves shall be measured and paid separately. 10.00 M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications complete all as specified and as directed. 11.00 Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing the debris from site to out site MoD Land complete all as specified and as directed. 12.00 M & L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as specified and as directed. 13.00 M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path and paving, finished even and smooth without using extra cement complete all as specified and as directed. 14.00 M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, finished even and smooth with using extra cement complete all as specified and as directed. 15.00 M&L for plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in surface channel/drain complete all as specified and as directed. 16.00 Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and as directed. 17.00 Supply and Fixing in repairs, SFRC drain cover any size, 75mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent as approved by GE. (ii) Contractor will provide manufacturer test certificate of SFRC cover . 18.00 Dismantling wall and ceiling boards ( fibre, pulp, insulation etc.) or insulation boards / slabs / blankets, any thickness, including fillets complete all as specified and as directed. 19.00 M & L for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber accountic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600x600) mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped aglvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24x24) mm of thickness 0.45 of mm c/c universal main runner of T Shape with double rotary siticing of size (38x25) mm of lenght 1200mm made from 0.33GS steel of lenght 3.60 mtr to be spced at 600x 600mm size) c/c cro runner T shape wtih double rotary siticing of size (30x24)mm of length 1200mm made 0.25 thick GS sheet spaced @ 600mm c/c (600mm 600mm) size complete all as specified and directed by Engineer -in- Charge. 20.00 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. 21.00 Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. 22.00 Taking down shutters of any description of size n. exc 1 Sqm each complete all as specified and as directed. 23.00 Taking down shutters of any description of size exc 1 sqm and n exc 2 sqm each complete all as specified and as directed. 24.00 Taking down shutters of any description exc 1 sqm and n exc 2 sqm each and re-fixing in the same opening after necessary repairing viz shifting of hinges/tower bolt / handle position etc complete all as specified and as directed. Note:- Cost of screws/nails and minor items shall be deemed to be included in the unit quoted rates. 25.00 S&F anodised aluminium powder coated frame for door, windows, ventilators, partition wall with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed 26.00 S&F anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips, rubber neoprene packing, aluminium handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc. complete all as specified and as directed. 27.00 S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised, handle 2 nos in each window, aluminium fittings such as peg stays150mm long (1 no.), hinges type B-21100mm long (2 no.), suitable handle (1no.) complete all as specified and as directed. 28.00 S&F aluminium anodised with powder coating (minimum thickness of powder coating 50 micron) grill of design and parttern as approved by GE including aluminium beading complete all as specified and as directed. 29.00 S&F 5.50mm thick tinted, sheet glass of selected quality fixed to aluminium frame work complete all as specified and as directed. 30.00 M&L for 12mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & fixed with screws to timber/aluminium frame complete all as specified and as directed 31.00 S & F door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width of Aluminum body (die cast) weight between 61 to 80 kg complete all as specified and as directed. 32.00 M&L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty complete all as specified and as directed. 33.00 S & F mild steel mortic lock vertical type size 100mm 4 levers complete all as specified and as directed. 34.00 S&F aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws complete all as specified and as directed. 35.00 S&F aluminium door stopper double legged with rubber shoe 75mm long fixed to door shutters complete all as specified and as directed. 36.00 M & L 2nd class hard wood plain, solid, straight chowkhats, and frame wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. 37.00 S&F for 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and as directed. 38.00 S&F for factory made single extruded WPC (wood polymer composit) solid door/window and other frames/chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade) calcium carbonte and natural fibers (wood powder/rice husk/wheat husk) and non toxic aditives(maximum toxicity index of 12 for 100 gms) fabricated with full body threaded star headed SS screws having minimum frame density of 750 kg/cum screw withdrawl strength of 2200 N(face) & 1100N(Edge) minimum compressive strength of 58 N/sqmm modules of ealsticity 900 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ss dash fasteners of required dia and length complete as per direction of Enger-in-charge. Make- M/s Rajshree plastiwood ltd or its equivalent as per list of make. 39.00 S&F for factory made single extruded WPC (wood polymer composit) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (suspension grade) calcium carbonte and natural fibers (wood powder/rice husk/wheat husk) and non toxic aditives(maximum toxicity index of 12 for 100 gms) fabricated with full body threaded star headed SS screws having minimum frame density of 650 kg/cum screw withdrawl strength of 1800 N(face) & 900N(Edge) minimum compressive strength of 50 N/sqmm modules of ealsticity 850 N/sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hotmelt adhesiv on both faces of shutter and fixing with stailess steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as direction of Enger-in-charge. Make:- M/s Rajshree plastiwood ltd or its equivalent as per list of makes. 40.00 Dismantling of floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles and rubbish off the premises complete all as specified and as directed. 41.00 M&L for vitrified ceramic tiles 8-10 mm thick, 1st quilaty (Square/rectuangular) polished, double charge shade, area of each tiles exceeding 0.36 Sqm but not exc. 0.42 Sqm, as in floors etc. set and jointed with neat cement slurry and pointed in white or coloured cement to match with and including over15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed. 42.00 Description all as per srl item No. 39.00 bove but as in skirting over 10mm thick plastering with CM (1:4) complete all as specified and as directed. 43.00 M &L for ceramic coloured/ printed non-skid tiles of size 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.06 Sqm but n exc 0.16 Sqm laid as in floors, set and jointed with neat cement slurry with and including over 15 mm thick screed bedding layers of cement sand mortar (1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed. 44.00 M&L for glazed ceramic coloured tiles (colour & shade as approved) of size (450x350)mm x 7mm thick as in vertical surfaces as in skirting and dado, set and jointed in neat cement slurry with amd including over 15mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and as directed. 45.00 S&F in repair wash hand basin, vitreous China, flat back (550x400)mm size, white including PVC waste coupling 32mm size, PVC waste pipe 32mm bore, pair of brackets of mild steel (35 x 35 x 6)mm size including one mixer cast copper alloy 15mm bore, one brass stop valve 15mm bore and one PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and as directed by Engineer-in-Charge. 46.00 Supply & fixing in repair vitreous china EWC super constellation including flushing cistern of size (83x37x66)cm with S trap complete all as specified and as directed. 47.00 Supply & fixing in repair vitreous china Urinal pot white including partition, waste pipe, screw with wall fixing complete all as specified and as directed. 48.00 S&F in repairs two way wall mixer with popup waste system, hot and cold facilites and 450 mm long braidaed hoses chromium plated complete all as specified and as directed . 49.00 S&F in repair health faucet with double lock 1 meter brass plated stainless steel flexible hose and wall hook complete all as specified and as directed. 50.00 S & F in repair copper alloy CP toilet paper holder complete all as specified and as directed. 51.00 M&L for replacement of 100mm CI floor/nahani trap with grating including jointing and breaking/ dismantling any type of floor and making good cement concrete Type B-1 (1:2:4) and testing after repairs and taking down existing trap etc complete all as specified and as directed. 52.00 S&F in repair, brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed. 53.00 Taking up or down 15mm steel tubing and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed. 54.00 M&L for GI tubing, 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed. 55.00 M&L for cutting chases, pinning in making good to facings where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc, and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good cutting not exc 10 cm girth as in wall complete all as specified and as directed. 56.00 S&F in repair 15mm bore cast copper alloy, CP angle cock, screwed down, high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. 57.00 S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm and fixed complete all as specified and as directed. 58.00 S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm and fixed complete all as specified and as directed. 59.00 S&F in repair cast copper alloy CP Soap dish complete all as specified and directed. 60.00 S&F in repair bib taps with wall flange 15mm bore, chromium plated, fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. 61.00 S&F in repair pillar cock, foam flow cast copper alloy, chromium plated, fancy type, 15 mm dia, capastan heads, screwed down high pressure complete all as specified and as directed. Make:- Cat No 8304 of make Prayyag or equivalent as per list of makes. 62.00 S&F in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed. 63.00 S&F in repair PVC valveless, syphonic action type, flushing cistern low level, 10 litre capacity , white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed. 64.00 S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm / 40 mm dia complete all as specified and as directed. 65.00 S&F in repair (600 x450) mm fancy type or bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. 66.00 S&F in repairs 15 mm bore Bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed. (Minimum weight 90 gms). 67.00 S&F in repairs 15 mm two in one angle valve cast copper alloy, chromium plated with wall flange and fancy type with high pressure screwed down and with CP flange of same make complete all as specified and as directed . 68.00 M&L for 18-20mm thick Granite (of jet black ) work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed. Note:- The cost of half round moulding shall be deemed to be included in unit rate. 69.00 Dismantalling water tanks and removal from site of capacity exc 250 ltr and not exc 500 ltr complete all as specified and as directed. 70.00 M &L for 500 litres capacity rotational moulded polyethene water storage tank (cylindrical vertical with closed top), white, three layers, hoisted and fixed in position complete all as specified and as directed. 71.00 Supply and fixed ball brass valve high pressure with polythene float and fly nut complete to bore of pipe 20mm complete all as specified and as directed. 72.00 Demolition of brick work or stone buillder built in cement mortar of any description complete all as specified and as directed. 73.00 M&L for brick work with sub class B works, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete complete all specified and as directed. 74.00 Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed. 75.00 S&F mild steel work such as angle iron post, flat iron in fencing including cutting as making doubble swan neck i.e. Y shaped including welding with proper overlapping & welding MS Plate with angle iron bottom as directed, drilling holes notching for wire etc embedded in concrete fixed vertically conforming to Fe 290 grade E-165 complete all as specified and as directed. Note:- Embedded portion of Angle Iron post shall be treated with tar of coat of tar black paint and cost of the same shall be deemed to be included in unit rate. 76.00 M&L for preparation of newly steel surfaces of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer of any height complete all as specified and as directed. 77.00 S&F for concertina coil with punched tape of 600 mm dia (when stretched), centre core wire of minimum 2.5 mm dia of mild steel wire conforming to IS 280-2006 with galvanised coating of steel concertina coil as per requirements laid down for medium coated wire in IS : 4826 Hot dipped galvainsed coating of round steel wires. Conretina coil shall be fixed in diamond shape with the help of dovetail two handle and spikes shall be fixed at both end of coil,minimum straight length of the wire 150 RM for 10 RM of work ,minimum weight 13.5 Kg for 10 RM of work including dismantling of existing concertina coil complete all as specifed and directed by Engr-in-Charge. (Note:- The actual weight of concertina coil brought by the contractor at site shall be ascertained by BOO as ordered by GE). 78.00 S&F for concertina coil with punched tape of 900 mm dia (when stretched), centre core wire of minimum 2.5 mm dia of mild steel wire conforming to IS 280-2006 with galvanised coating of steel concertina coil as per requirements laid down for medium coated wire in IS : 4826 Hot dipped galvainsed coating of round steel wires. Conretina coil shall be fixed in diamond shape with the help of dovetail two handle and spikes shall be fixed at both end of coil,minimum straight length of the wire 180 RM for 10 RM of work ,minimum weight 16.5 Kg for 10 RM of work including dismantling of existing concertina coil complete all as specifed and directed by Engr-in-Charge. (Note:- The actual weight of concertina coil brought by the contractor at site shall be ascertained by BOO as ordered by GE). 79.00 Dismantling of fencing wire, barbed wire any type and description complete all as specified and as directed. 80.00 Supply and fixing galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2 mm dia barbed of 75mm spacing and straining and fixing to any type of standard rail, straining bolt including securing or tying at crossings with and provision of galvanised mild steel wire staples or steel pins etc as directed (each line wire to be measured) complete all as specified and as directed. 81.00 M&L for cuting holes in brick walls exc half brick but n.exc one brick, built in cement mortar for fixing holdfasts in jambs of existing opening and making good complete all as specified and as directed. 82.00 M&L PCC (1:3:6) type C1 (using 20 mm graded stone aggregates) as in hold fast block including necessary form work complete all as specified and as directed. 83.00 S&F mild steel work framed such as grill, gratings, etc with ends of bars shouldered and /or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe.290.Gde-E-165. complete as specified and as directed. 84.00 Dismantling of fencing wire mesh, any type of any description complete as specified and as directed. 85.00 Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete as specified and as directed. 86.00 Supply only Chain link MS galvanised fencing, 4mm dia GI wire mesh size 100mm x 100mm complete as specified and as directed. 87.00 S&F mild steel screw bolts 12 mm dia (machine made) with hexagonal heads at one end and screwed other end to be fitted with washers (02 nos.) and one hexagonal nut, length of bolt exe 5 cm and n exe 10 cm complete as specified and as directed. 88.00 S&F mild steel fabricated round bars 10mm dia as in horizontal bars for chain link fencing incl necessary hooking at ends all as complete as specified and as directed. 89.00 Excavation in post hole (or similar holes) each n.exc 0.50 Cum getting out returning, filling in and ramming earth around in layers n. exc 25cm watering and removed surplus soil to a distance n. exc 50m and making good surface in soft/loose soil complete as specified and as directed. 90.00 Supply and fixing in repairs, pre cast cement concrete jallies, 35 mm thick, type B0 1:2:4 (using 12.5 mm graded crushed stone aggregate) including wire fabric set and jointed in cement mortar (1:4) complete as specified and as directed. 91.00 S&F in repair Aluminium Composit Panel (ACP) sheet with 1x1.5 aluminium tube over the framed/ beam of gates. ACP shall meet under mentioned technical requirements:- (i) Coating on front : high quality polymer resin.(ii) Core : FR Core (Fire retardant)(iii) Thickness : 4mm(0.5 mm+3.0mm+0.5mm) (iv) Weight : 7.50Kg/Sqm(v) Width: 1200mm(vi) Length: 1200 to 2400mm(vii) Structure: aluminium panel are protective film,clear coating PVDF,primer coating,antirust layer,aluminium skin and polyethylene.(viii) Temp Resistance : Between -50C to +80C(Note:- The quoted rate is deemded to be included necessaryy scaffolding required and joint sealing) 92.00 S & F in repair 12mm thick toughened glass fixed with double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other party made of mild steel heavy duty and stainless steel handle purpose made on both side with locking machanism and with necessary stopper etc complete all as specified and as directed. 93.00 Demolition and breaking up drain pipe 75/100mm dia ( Salt glazed ware, AC or PVC) of any type complete all as specified and as directed. 94.00 S&F 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. 95.00 S&F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and as directed. 96.00 S&F in repairs PVC(SWR) bends any radius, 75 mm bore complete all as specified and as directed. 97.00 S&F in repairs PVC(SWR) bends any radius, 110 mm bore complete all as specified and as directed. 98.00 Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or steel, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed. 99.00 S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or rubeer bedding in square n. exc 0.5 Sqm in each pane complete all as specified and as directed. 100.00 S&F in repairs of sink with drainage board, made out of stainless steel 1mm thick, kitchen or laboratory with plugs, washes and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size (915X460)mm with bowl size (410X330X160)mm complete all as specified and as directed. 101.00 S&F in repair brass chromium plated shower rose,125 mm size fixed to 15 mm bore iron pipe complete all as specified and as directed. 102.00 S&F in repair water closet vitreous china squatting pan, Orissa pattern size (580x440)mm white with integral foot rests (excluding flushing cistern and flush pipe) and including with P or S trap complete including provison of lime concrete bedding fixed in repair complete all as specified and as directed. 103.00 M&L for gunniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm tied to existing reinforcement with nails,adhesive plaster grade for concrete and providing gunniting pressure 2.0/2.5kg/sqm with admixture 1 part of cement and 3.5 part of sand with average thickness 40 mm and making the surface even including 15mm thick plastering in CM 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work to be carried out,complete all as specified.(Note.- Wherever reinforcement required shall be measured and paid seperately) 4. STRUCTURAL STEEL Steel Authority of India Limited (SAIL) Brand: SAIL / Rashtriya Ispat Nigam Limited (RINL) Brand: RINL / Tata Iron & Steel Company (TISCO, or Tata Steel) Brand: TATA / M/sJindal Steels and Power Ltd. Brand: JINDAL 5 Factory made Paneled/ Glazed /Gauged door Shutters M/s MP Wood Product Indore, M/s Jain Doors Pvt Ltd Sonipat, Goyal Industiral Corporation New Delhi, Shri Krishna industries, Panchkula, 6 Factory made Flush door Shutters M/s Green Ply Industries, M/s Centuary Ply, M/s dura Ply. Mysore Chip Board, Archid, Swastik Ply Wood, M/s Jain Doors Pvt Ltd 7 PVC Door Frame/Shutters Sintex, Rajshri Plastiwood Ltd, M/s Dura Plast Extraction PVt Ltd, M/s Fenesta, Ecocell,ACCUCELL 8 FRP Door frame and Shutter Selected Products Co., Sintex, Rajshri Plastiwood Ltd, Accure Polytec Pvt Ltd ,Ecocell, Fiberways 9 UPVC Window/Doors Fenesta, NCL Veka, MADHU Industries, H2O solutions, YASHPOLY,ACCUCEL, OKOTECH, ASECO (M/s Ashish Industries) 10 Iron Mongery Mowjee, M/s Kitch Architectural Product Pvt Ltd, RS Industries. 11 Hydraulic Door Closer Everest, Universal, Godrej 12 Particle Board(Veneered & Unveneered Laminated)/ Block board Kitply, Nova Pan Industries, New Delhi, M/s Green Ply Industries Ltd, Archid Ply, Bhutan Board, Dura Board Mysore Chip Board Ltd 13 Plywood for General Purposes Dura Ply, Archid ply, Bhutan Board,Archid Board, Century, Durian, Mysore Chip Board Ltd 14 Decorative Laminates Archid Lam, Sunmica, Merino, Lam, Mysore Chip Board,Greelam 15 Terrazzo Tiles NTC, NITCO, Eurocon, Duracrete 16 Glazed Ceramic/non Skid Wall/Floor Tiles Kajaira, Johnson, AGL, QUTONE , Somany, NITCO, Orient bell ,VITERO, SUNHEARRT CERAMIK, VARMORA 17 Vitrified Tiles (Polished, unpolished & Glazed, Normal/ Anti skid) Kajaira, Johnson, AGL, QUTONE , Somany, NITCO, Orient bell,VITERO,SUNHEARRT CERAMIK, VARMORA 18 HDPE Storage Water Tanks SINTEX, SUPREME,PLASTO,POLYCON 19 Sanitary appliances /fittings(Chinaware) Hindware,Parryware,Cera,Jaquar, KOHLER, PRAYAG APROYALE,Somany 20 water Closet Seats and cover (Solid Bakelite) Thermostat Moulded toilet seat cover Parryware, Jaquar, Prayag Somani,Commander,CERA,Neycer 21 PVC Flushing cisterns Hindware, Commander, Parryware, CERA ,Jaquar, Johnson Pedar, Neycer 22 Stainless Steel Kitchen Sink with or without draining Board, Plate Rack NIRALI,CERA,DIAMOND,JAINCO,SHAKTI PRAYAG, (SILVER SHINE) M/s Bluestar Sanitary Industries 23 Ball Valves (Horzontal Plunger type) Dripless Faucets India, Flowjet , Ball Valves Inida. 24 Shower Roses Chromium plated (Swivel Type) GEM,JAQUAR, Jal 25 Bath room Fancy fittings JAQUAR,GEM,MARC, Jalangi 26 Bib Taps and Stop Taps (CP),Pillar tap, Fancy fittings JAQUAR, PARKO, GEM, Marc 27 Bathroom Cabinets Jaquar, Cera, Commander, Parryware .... more in document

BRR:7636081 Procurement of Lab items along with consumable items under District Tuberculosis Programme under Dept. of H&FW, Jalpaiguri district Procurement Of Lab Items Along With Consumable Items Under District Tuberculosis Programme Under Dept. Of Hfw, Jalpaiguri District , Broom Stick @ 100 Nos/Bundle (One Bundle 100 Stick) , Basic Fuchsine @ 25 Gm Each (Chemical Name: Parasaniilne Bydrochioride, Chemical Structure: C2oh10c1n3, Mol Wt-337.86 Dye Content: Approx 85%-88% (Dye Content Must Be Mentioned ) Color: Metallic Green)-25Gm Pkt With Msds) , Filter Paper @100 Nos /Packet , Lens Cleaning Paper (A4 Size ) , Methyline Blue@ 25 Gm Each (Msds) , Methyline Spirit @ 5 Ltr Jar (Msds) , Sputum Container (Sputum Container Specification- Cups Made Of Special Medical Grade Polypropylene, This Plastic, Translucent, Diameter -4Cm , Capacity 30Ml, Screw Able Cap Should Also Be Made Of Special , Medial Grade Polypropylene And Should Be Air Tight, Leak Proof With Label. ) , Sulfuric Acid (Conc) @ 500 Ml Each (S2so4, Density: 1.83 G/Cm3, Boiliing Point: 337 Oc, Melting Point 10.31 Oc, Molar Mass 98.079 G/Mol, Msds) , Falcon Tube (Falcon Tube (Sterile) Material: Polypropylene, Capacity 50Ml, Tube Style: Centrifuge, Bottom Style: Conical, Neck Style: Wide, Top Style: Threaded Max Rcf: 15500Xg, Graduations: Yes, Graduation Range: 5-50Ml, Graduation Interval: 2.5Ml , Color: Clear, Cap Style: Seal, Cap Material: High Density Polyethylene, Cap Diameter 35.2Mm (Approx), Sterile: Yeas, Outer Diameter: 29.1Mm(Approx) Self Standing: No, Length : 114.4 Mm(Aprox), Feature: Disposable, Rack: No, Sterile Tube, Falcon Tube Should Be Able Withstand A Temperature Of 121 Degree Celsius At 15 Lbs Per Inch Square For 15Min. (Tarson/Bd) , Crystal Phenyle @500 Gm Each (Msds) , Dimond Marker (Glass Marker ) , Tissue Paper (Good Quality, Oil Absorbing 200Gm Not ) , Spirit Lamp (Steel Material) , Food Operator Paddle Bukket 20 Ltr (20 Litre Capacity) , Funnel Small 2 (Borosil) , Drop Dottle (100 Ml Plastics Bottle) , Glass Rod @ 2Ft Each , Binocular Microscope Bulb , Distilled Water 5 Ltr Jar (5 Litre Capacity) , Liquited Paraffin Heavy 500Ml (Heavy) , Timer , Annexure-A (Ose) Each Set Contain 8 Page (60 Gsm Demy, Set Of 4 Sheets (3 Sheet Both Side And One Sheet Single Side Print) Size 21.5 Cm X 27.5 Cm) , Identity Card Dstb (70 Gsm, Both Side Printing , Size = 21.5 Cm X 14 Cm) , Identity Card Drtb (70 Gsm, Both Side Printing , Size = 21.5 Cm X 14 Cm) , Treatment Card Dstb (Cemtury Board 165 Gsm Both Side Print, Size = 27.5 Cm X 23 Cm) , Lab Form 15A (400 Book (Each Book Contain 100 Pages 70 Gsm Single A4 Sheet Both Side Printing,Pad Binding Size - 21 Cm X 29.5 Cm)) , Tb Register (Dfc Conquest, 70 Gsm Cover Hard Board 32 Ounce, 75 Sheet Both Side Print, Size = 21 Cm X 33 Cm With Page No (10 No. Book)) , Lab Register (Dfc Conquest, 70 Gsm Cover Hard Board 32 Ounce, 75 Sheet Both Side Print, Size = 21 Cm X 33 Cm With Page No (100 No. Book)) , Naat Register (Dfc Conquest, 70 Gsm Cover Hard Board 32 Ounce, 75 Sheet Both Side Print, Size = 21 Cm X 33 Cm With Page No (100 No. Book)) , Para Film Roll (One Roll) (2 In X 250 Ft Roll) , Auramin O (1,1,Bis (P-Dimethylaminophenyl) Methylenimine Hydrochloride, Formula C17h21n3hcl, H2o, Mol Wt 321.85 Appearance: Yellow To Borrow Powder, Potency (Dye-Content) Approx 85% Absorbent: 435M (Uom-50Gm Packet) With Msds) , Hcl (Hydrochloric Acid) @ 500 Ml Each (Msds) , Potasium Permanganate @ 500 Gm Each (Potassium Permanganate, Formula: Kmn04, Mol Wt 158.04:>=99%, Appecerance Purple Solid. Each Jar Contain 500 Gm With Msds) , Ethanol, Absolute (99.9%) @ 500 Ml Each (Msds) , Cellotape (2 Inc Width 65 Meter) , Zipper Bag Small Size (17.5 X 12.5) , Zipper Bag Medium Size (23.5 X 18 Cms)

BRR:7636033 REPAIRING OF POT HOLES OF ASPHLATUM ROADS AT DIFFERENT PLACES IN WARD NO- 21. N.B.- 1) THE QUANTITY AS REFERRED IN THE BOQ FORMAT IS A HYPOTHETICAL QUANTITY HAVING NO RELATION WITH ACTUAL QUANTITY QUOTED RATE WILL BE ONLY CRITERIA TO SELECT THE L1 BIDDER.WORK WILL BE TAKEN UP AS PER REQUIREMENT AS AND WHEN REQUIRED. WORK AND TECHNICAL SPECIFICATION OF THE WORK WILL BE THE PART AND PARCEL OF THE CONTRACT AND THE BIDDER WILL HAVE AS PER THE DIRECTION OF ETC.2) BILL WILL BE DRAWN ON ACTUAL EXECUTION OF WORK AND ESTIMATE WILL BE PREPARED AS PER ACTUAL ITEMS OF WORK EXECUTED AT BILLING STAGE

BRR:7636006 Installation Of Children Play Equipment At Kalyaniya Park In Ward No -09, Under Kalyani Municipality- 1 MULTI PLAY STATION:Supplying, fitting and fixing of INO FRP Made Tube slide, FRP 6 mm- thickness INO FRP Made Wave slide, FRP 5 mm thicknessTotal Cover Area-15’x 13’ Iron part-2’.6” X 2’.6” inch Sq Bar, 3 X 1 Sq Hollo Tube, 1’ X 1’ Sq Hollo Tube 2’.6” thicknessMulti play with one Slide,one tunnel slide, one no shed, Platform height-4.5’, Structural parts made of MS hollow section (including cutting, fitting, welding, bolting and smoothing grinding etc. complete). Entire product is assembled with nut bolts. Outer diameter of metal parts: 26, 33 ,48,60,76,50x25mm, thickness of metal parts: max 3mm, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 2 PARK BENCH WITH CASTING HANDLE:Supplying, fitting and fixing of SIZE: Length –5’,Handle –C.I. casting ,Seat: wood or Hollow section or frp. Entire product is assembled with nut bolts. SEAT parts:75X25mm,50x25mm,.Color:multicolor ASPA finish paint on 2 coats of primer. 3 Seesaw Supplying, fitting and fixing of 4 Seat see-saw, 4 No. FRP Made seat, FRP 6 mm thicknessIron part-2’.6” X 2’.6” inch Sq Bar, Thickness 2’.6” mmCover Area-9’ X 5’, FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 4 FRP GiraffeSupplying, fitting and fixing of FRP Giraffe Slide: Hight of Giraffe 8 Fit, Platform height 5’ slide lengh 10’ Structural parts made of GI pipe and MS hollow section (including cutting,fitting,welding,bolting and smoothing grinding etc. Completer) Entire product in assembled with nut bolts. Outer diameter of metal parts:60mm,48mm,42mm thickness of metal parts min2.9mm, ERP thickness: 4mm to 5mm, ERP DENSITY: 1600KG/M3. Color multicolor ASPA finish paint on 2 coats of primer. 5 Circular Swing Supplying, fitting and fixing of 4 seat circular swing, FRP Portion Thickness 5 mmIron part-2 inch Round pipe, 1 inch Round pipe, 2no Bearing, Iron thickness 2’.6” mm Cover Area-8’ X 8’,FRP thickness: 6mm to 8mm, FRP density: 1600kg/m^3.Color:multicolor ASPA finish paint on 2 coats of primer. 6 ATOM SWING WITH 6 SEAT Supplying, fitting and fixing of hexagonal shape Height:8.5ft.,length-6’each side,The chain link 8mmand take the load of 80 kg(each). . Structural parts made M.S Hollow pipes (including cutting, fitting, welding, Bolting and smooth grinding etc. Outer Diameter of Metal Parts-60mm, Thickness of Metal Parts- min. 2.2mm-3.0 mm, FRP thickness: 6 mm to 8 mm, colour: multicolour ASPA finish paint on 2 coats of primer. 7 GST 18 % 8 CESS 1 %

BRR:7635947 Tender For Renewal Of Software Licenses And Up-Gradation Of Existing It Hardware At Training Centre In Asian Continent; 1 RAM 16GB for HP EliteDesk 800 Mini Desktop PC 2 Discrete Graphic Card (internal/ external) 2GB or higher for HP EliteDesk 800 Mini 3 Hard Disk Drive 1TB for HP EliteDesk 800 Mini Desktop PC 4 Access Data FDK 5 Stellar Data Recovery 6 Cellbrite UFED 7 Oxygen Detective 8 IDA Pro (Floating Rate) 9 Belkasoft Evidence Center (Dongle based or Portable License) 10 F-Response Tactical 11 Nessus Pro Edition with minimum 128 IPs 12 BurpSuit 13 vCenter Server 7 Standard 14 vSphere 7 Enterprise Plus 15 Red Hat Enterprise Linux Server Standard 16 Watch Guard Subscription for M470 17 VM Ware Workstation 16 Pro 18 vRealise Operation 8 Standard CPU 19 Acunetix Standard - 5 Targets (by invicti) 20 Invicti (Formerly Netsparker)

BRR:7635792 Construction Of Plain Cement Concrete Road From Dhalai Road To Alam Mallik Hardware To Junior High School Maradighi Under Dadpur Gp. Aap No-93/2025-26.

BRR:7635738 Tender For Sinking Of Tubewell Near Ho Tapan Sing New Sinking If 100Mm X 40Mm Dia Tubewell With Pvc Pipe And Deep Well Pump With Platform In Fornt Of Tapan Sing Under Dhablat Gram Panchayat, Sagar Development Block In The District Of South 24 Parganas

BRR:7635718 Tender For Supply Of Equipments For State Food Labs. , Decription , Chiller Apparatus , Centriguge , Micro Filtration Assembly , Microscope With Digital Camera Display , Platinum Dishes 100 L , Chopper Grinder , Sulphur-Di-Oxide Apparatus , Refracto Meter With Sugar Scale , Karl Fisher Titator , Hplc With Dad Fld Ri Detector , Multi Tube Vortex Mixer

BRR:7635635 Tender forManual and spot billing of 48000 consumers per month by loading of SBM, meter reading, preparation of energy bills, delivery of energy bills to the consumers duly acknowledged, down loading of SBM, under Electrical Division,HPSEBL,Palampur (Time period 3 months)(SEOP 06/2025-26

BRR:7635632 Providing Of 1 No. Diesel Driven Vehicle Mahindra Utility/ Mahindra Camper (Latest Model ) As Pooled Attached Vehicle For All 3 Nos. Electrical Sub-Division Under (E) Division No.1, Uhl Stage-Iii, Bvpcl, Chullah For Fy 2025-26.

BRR:7635581 Supply Of 500Nos Of Safety Helmet With Voltage Sensor , Supply Of Silicagel Blue , 0.6Kva Ups , Safety Helmet With Voltage Detcetor( Quote Price For One Unit Only) , Silicagel Blue 10 To 12Mm , Pole Pit For 9.0M And 9.14 M Psc/Rcc / All Metal Poles (Each Pit) 1.25 X 0.6 X 1.83 Mtr , Ordinary Soil , Semi Rocky Soil , Heavy Rocky Soil Where Blasting/ Cheseling Required [Specific Approval Should Be Obtained From Concerned Ee] , Stay Pit , In Ordinary Soil [0.95 X 0.6 X 1.2M] , Semi Rocky Soil , Stay Pit In Heavy Rocky Soil Where Blasting/ Cheseling Reqiured [Specific Approval Should Be Obtained From Concerned Ee] , Erection Of Poles & Stays (Including Refilling Of Excavated Earth) , Erection Of 7.5M / 8.0M Poles [Rcc / Psc] , Erection Of 9.00M / 9.14M Rcc / Psc/Rail Pole, Tubular Pole And All Metal Poles , Stay Set , Erection Stay Set Complete , Stay Erection Without Rod And Pit , Replacement Of Stay Rod Only. (Including Stay Pit Excavation & Refilling & Erection) , Replacement Of Guy Shackle Only In Existing Stay , Erection Of Line Materials , Fixing Of Lt 1 Ph X Arm , Fixing Of Lt/Ht Ti Fitting , Fixing Of Lt 3 Ph X Arm , Fixing Of 3[1/2] V` X Arm , Fixing Of4[1/2] V` X Arm , Fixing Of 5 V X Arm , Fixing Of Tapping Channel / Guarding X Arm , Providing Of Line Spacers In Lt Lines 1 Phase , Providing Of Line Spacers In Lt Lines 3 Phase , Erection Of Ab Switch With Pt Insulator & Jumpering Complete , Erection Of Centre Rotating Switch Ab Switch Complete , Fixing Of Ht Pin Insulator / Strain Disc , 11 Kv Pin Insulator With Pin , 11 Kvstrain Disc / Polymer Disc With Hardware , 22 Kv Pin Insulator With Pin , 22 Kv Strain Disc / Polymer Disc With Hardware , 33 Kv Pin Insulator With Pin , 33 Kv Pinstrain Disc/Polymer Discwith Hardware , Fixing Of Lt Pin Insulator With Pin , Lt Shakle With Hardware , Fixing Of Aluminium Knob , Paving Stringing And Sagging Of Conductor Including Binding Of Pin And Proper Tight [Including Transport Of Condutor From Road Side To Work Spot] Per Run , Upto 7/2.59 Mm Acsr, 7/2.50 Aaac Including Pvc Cable Upto 25 Sqmm , Acsr 7/3.35Mm & 7/ 3.15 Aaac Including Pvc Cable Above 25 Sqmm , Acsr 7/4.09 Mm , Above 7/4.09 Mm Acsr & Dog Conductor , Earthing Wiring And Connection Including Transporting Of Earth Pipe And Excavation Of Pit] , Transformer Structure Earthing 10Ft Depth - 3 Nos Of Pipe Throughtubes , Dp Earthing Including All Works [Double Side Earthing] , Erection Of 4Th Earth Pipe Including Earthing , Earthing Of Poles , Earth Pit Masonary Work 3 Nos Earth Pits Or Using 3 Nos Concrete Tub. , Replacement Of Detoriated Earth Pipe Per Location , Concreting With Mixture 1:3:6 [Including All Materials]. , Mass Concreting For Centre Support For 2 Feet Including All Materials , Mass Concreting For Pole0.6X0.6X1.25M.With Coping , Sleeve Concreting For Pole 0.6 M X 0.6M X 0.3 M With Coping , Sleeve Concreting For Stay Set 0.3 M & 0.75 Long , Erection Of Distribution Transformer Structure Complete , Excavation Of Structure Pole Pits 0.9 X0.9 X 1.83 Mtr , Transporting Of Pole To Pit Location 2 Nos. , Erection Of Poles 2 Nos , Excavation Of Stay Pit 4 Nos , Erection Of Stay Set (4 Sets) , Mass Concreting (Cement:Sand:Jelly Supplied By The Contractor) 2 Nos. , Erection Of 22 Kv Ab Switch , Ttransformer Structure Earthing 10Ft Depth - 3 Nos Of Pipe Through Earth Tubes , Erection Of Top Channel , Bed Channel [2 Nos Channel] Erection , Cross With Stud For Bed Channel Erection , Erection Of Belting Angle / Hg Fuse Angle , Erection Ofhg Fuse Set , Erection Of Ht Las With Jumpering And Earthing , Erection Of Lt Las With Jumbering And Earthing , Erection Of Jumpering [Ht Side] , Transformer Wiring In Lt Side Including Jumpering Bus Bar Etc. , Erection Lt Open Type Fuse Unit Arrangement Single , Erection Lt Open Type Fuse Unit Arrangementdouble , Painting Of Stru. Complete Excluding Dt [Two Coat Of Red Oxide] All Metal Parts(Excluding Cost Of Paint). , Painting Of Stru. Complete Excluding Dt [One Coat Alu Paint, Excluding Cost Of Paint) , Colour Washing Of 2 Numbers Structure Pole [Excluding Cost Of Distember / Snowsem] , Painting Name Of Ss At Seating Channel Including Paint. , Painting Of Dt Alone [Excluding Painting] With Red Oxide And Double Coating Of Aluminium Paint. , Dt Metering Arrangement (Without Materials) , Erection Of Distribution Transformer /Dismantling Of Dt , Upto 100 Kva , Above 100 Kva And Upto 250 Kva , 500 Kva , Colour Washing Of Rcc / Psc Poles , Numbering Of Poles Including Cost Of Paint / Loc [Black Background And Yellow Letters] , Painting Of Sc Details In The Meter Board / Agl Boxes / Hut Scs Including Paint. , Service Connection , Transporting Of Required Materials From Road Side To Work Spot And Erection Of Street Light Fixture Including Wiring Clamping Of Pipe Aerial Board Assembling , Transporting Of Required Materials From Road Side To Work Spot And Erection Of 250 Ws.V. Lamp / Mercury Lamp/Led Yard Light Fittingincluding Wiring, Clamping Of Pipe, Serial Board Assembling Etc. , Fixing Of Street Light Fitting With 2 Cfl/ 4 Cfl , Provision Of St. Lt. Switching Arrangements Including Fixing Meters, Wiring, Service Board Etc. , Erection Of Hut Service Connection Complete With / Without Meter Including Transport Of 5Materials From Section Store To Work Spot , Erection/Dismantling Of Metering Set 11 Kv / 22 Kv/33 Kv , Fabrication Works. , Labour Charges For Alteration Of Back Clamp / Stay Clamp To Suitable For Works. , Providing Of Holes. , All Size Angles / Channel Upto 5/8 , All Size Angles / Channel Above 5/8 , Slot Holes In Flat / Angles / Channel Upto 3/4 , Slot Holes In Flat / Angles / Channel Above 3/4 , Fabrication Of Centre Support Only For Dt Structure , Cutting Of Rs Joist / Angles / Ms Channels , Welding Of Rs Joist / Angles / Ms Channels , General , Set Right The Leaning Pole In Both Ht & Lt[ Pin Point ] Location , Set Right The Leaning Pole In Both Ht & Lt[ Cut Point ] Location , Resagging Of Lines For All Sizes Cut Point Location , Converting Pin Point Into Cut Point Ht Lines , Converting Pin Point Into Cut Point Lt Lines , Clearing Tree Branches Ofcoconut Tree , Clearing Tree Branches Of Neem, Tamarind, Countrytree Etc., , Releasing And Erection 1 Ph Sc Wire [During Conductor Or Support Change] , Releasing And Erection 3 Ph Sc Wire [During Conductor Or Support Change] , Destruction Of Pole Concerting At Site. , Retrieving Grill From Detoriated Pole [Grill Separate From Damaged Pole] , Re Earthing Of Structure Completely Including Earthpipe Changing If Any 3Nos Earth Pipe , Re Examination Of Dt Earthing ( Digging , Inspection And Making Connection In Between Extg. 3Nos Earth Pipe ) , Guarding Arrangement :- , Cradle Guarding Including Earthing And Earth Pit Excavation [Railway & P&T Crossing ] , Flat Guarding With 4 Wire , Split Netural Guarding , Loading And Unloading : , Loading Of 7.5 Mtr / 8.0 Mtr Rcc / Psc/ Metal Pole [Per Pole ] , Loading Of [ 9.14 Mtr ] 9.0 Mtr Poles Rcc /Psc Pole / Metal Pole [ Per Pole ] , Unloading Of Psc / Rcc / Metal Poles , Transporting From Road Side To Workspot , Transport 7.5 Mtrs / 8.00 Mtrs Of Poles Including R.S.Joist And Rail Poles Upto 1.0 Km , Transport 7.5 Mtrs / 8.00 Mtrs Of Poles Including R.S.Joist And Rail Poles Above Additional 1.0 Km Or Part Thereof[ Certified By Aee ] , Transport Of 9.0 Mtr And Above Poles Including R.S. Joist And Rail Poles Upto 1.0 Km , Transport Of 9.0 Mtr And Above Poles Including R.S. Joist And Rail Poles Upto Above Additional 1.0 Km Or Part Thereof , Transport Of Line Materials , Transport Of Line Materials [ Minimum 1 Mt ]From Sub Stores To Section Pocket Store Ornear To Work Spot At Road Side By Using Private Vehicleor Vice Versa Excluding Loading And Unloading Upto 8 Kms , Transport Of Line Materials [ Minimum 1 Mt ]From Sub Stores To Section Pocket Store Ornear To Work Spot At Road Side By Using Private Vehicleor Vice Versa Excluding Loading And Unloading Above 8 Kms And For Every Addl. 1 Km , Transport Of Equipements , Transporting Of Distribution Transformer/Metering Set By Using Private Vehicleload Of One No.Minimumup To 30 Km , .Transporting Of Distribution Transformer/Metering Set By Using Private Vehicleload Of One No.Minimum Above 30 Km For Every Addl .1 Km , Dismantling Works , Dismantling Of 7.5M / 8.0M Poles [Rcc / Psc] , Dismantling Of 9.00M / 9.14M Rcc / Psc/Rail Pole, Tubular Pole And All Metal Poles , Dismantling Stay Set Complete , Dismantling Of Lt 1 Ph X Arm / Lt/Ht Ti Fitting , Dismantling Of Lt/Ht Ti Fitting , Dismantling Of Lt 3 Ph X Arm , Dismantlingof 3[1/2] V` X Arm , Dismantlingof Tapping Channel And Guarding X Arm , Dismantling Of 11 Kv Strain Disc/Polymer Disc With Hardware , Dismantling Of 22 Kv Pin Insulator With Pin , Dismantling Of 22 Kvstrain Disc With Hardware , Dismantling Of 33 Kv Pin Insulator With Pin , Dismantling Of 33 Kvstrain Disc With Hardware , Dismantlingof Lt Pin Insulator With Pin , Dismantlingof Lt Shackle With Hardware , Dismantling Of Aluminium Knob , Dismantling Of Conductor7/2.59 Mm Acsr, 7/2.50 Aaac Including Pvc Cable Upto 25 Sqmm , Dismantling Of Conductoracsr 7/3.35Mm & 7/ 3.15 Aaac Including Pvc Cable Above 25 Sqmm , Dismantling Of Conductoracsr 7/4.09 Mm , Single Phase Meter &3 Phase Meter , Fixing Of Single Phase Meter , Fixing Of 3 Phase Meter , Dismantling Of Single Phase Meter , Dismantling Of 3 Phase Meter

BRR:7635527 Tender For Sivagangai Dccb H.O. Admin Building; 1 Earth work excavation for foundation in all classes of soils (including soft rock)except hard rocks and refilling of foundation and basement, carting away the excess soil as directed. 2 Laying of P.C.C. 1:5:10 for foundation using using 40mm hard broken aggregate including the cost of materials, transport charge, labour for curing all leads and lifts etc. 3 Pouring of R.C.C 1:1.5:3 M20 grade concrete for foundation using 20mm hard broken aggregate including the cost of materials, admixture, transport, labour charges on barbending, Fabrication, shuttering, Centering, Concreting etc., but excluding the cost of steel. 4 Footing: 5 Plinth Beam: 6 Columns: 7 Tie Beam: 8 Floor Beam: 9 Lintel Beam: 10 Stilt Roof Beam: 11 First Floor Roof Beam: 12 Second Floor Roof Beam: 13 Third Floor Roof Beam: 14 Headroom Roof Beam: 15 Floor Slab: 16 Stilt Floor Roof Slab: 17 First Floor Roof Slab: 18 Second Floor Roof Slab: 19 Third Floor Roof Slab: 20 Headroom Roof Slab: 21 Safe Room: 22 Staircase: 23 Compound Wall: 24 Sump: 25 Septic Tank 26 Filling of excavated earth and gravel for basement in layers not more than 15 cm including the cost of Gravel, transport charges,labour for filling, watering, ramming with surface vibrator, consolidating etc., 27 Brick work in C.M 1 :5 for using First Class flyash bricks for substructure including the cost of all materials, transport, hire charge, scaffolding, charge for curing etc. 28 Brick work in C.M 1 :5 for using First Class Burnt Clay Chamber / Wire Cut bricks for supersturcture including the cost of all materials, transport, hire charge, scaffolding, charge for curing etc. 29 Plastering in C.M 1 :5 including the cost of all materials, transport, hire charge for scaffolding, charge for curing, admixtureetc. 30 Ceiling Plastering in C.M 1 :3 including the cost of all materials, transport, charge for curing, admixtureetc. 31 Outer Plastering in C.M 1 :5 including the cost of all materials, transport, charge for curing, admixtureetc. 32 Hire charge for steel prop scaffolding for ceiling plastering including the cost of all labour for installation, dismantling and tranport charges. 33 Hire charge for steel prop scaffolding for outer plastering including the cost of all labour for installation, dismantling and tranport charges. 34 Flooring in cm 1 :3 using Double charged virtified tiles 600mmx 600mm x 8mm including cost of all material, labour& lead lift charges. (The make and brand of the tiles should be approved by the authority before use on works) 35 Bathroom Flooring in cm 1 :3 using virtified tiles with 2-3mm spacers and filling the joints with MYK Lacticrete SP-100 epoxy grout including cost of all material, lead lift & labour charges.(The make and brand of the tiles should be approved by the authority before use on works) 36 Waterproofing of bathroom by applying of 2 coats of Fosroc brushbond RFX after cleaning up of the surface with wire brush and moisting the surface before application including cost of all material & labour charges. 37 Bathroom Filling using broken AAC blocksin cm 1 :8 upto required depth and placing of drain pipes with slits including cost of all material, lead lift & labour charges. 38 Supplying of UPVC Windows (Open Type), Ventilator as per Indian Standards including cost of all materials,fitting & transportation charges etc., 39 Fixing of Rolling Shutter (Flat Type) with Gear per Indian Standards including cost of all materials,fitting & transportation charges etc., 40 Providing of S.S Hand rails using 304L grade Stainless steel pipes including the cost of all materials and labour., 41 Colour wash on the plastered surface after applying 2 coats of wall putty, 1 coat of primer, 2 coats of emulsion (First quality)including cost of all materials & labour charges Etc., 42 A1-WIRING 43 Supply, Installation, testing and commissioning of surface/concealed type of point wiring with modular type switches, sockets and all materials as per the point wiring chart. The item including cost of supply and installation of 19mm(in wall) or 25mm(ceiling/wall) dia PVC conduits, couplers, junction boxes, bends, ceiling/wall plates, metal boxes, switches, sockets, draw boxes & top cover plate (3mm hylam sheet), 3 run of 1.5sq.mm FRLS copper wires, bakelite connectors, crimping type ferrules, copper lugs, brass cup washers & brass screws, clamps & screws and bolt & nuts etc. All the points shall be terminated with 300mm length of additional wires along with connector terminal blocks. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer. 44 One light / exhaust fan / wall mounting fan point controlled by one No. 1-way 6 Amps switch. (upto 6m) 45 One fan point (with regulator) controlled by one No. 1-way 6 Amps switch. The item including cost of fan hook with metal box, top round sheet/plate and 2M stepped regulator etc. (upto 6m) 46 One light / wall mounting point controlled by two Nos. 2-way 6 Amps switch. (upto 9m) 47 One 6A dependent 5-pin socket point controlled by one no of 6A switch. (switch & socket are mounted in a dependent switch box) 48 One 16A dependent 5-pin socket point controlled by one no of 16A switch. (switch & socket are mounted in a dependent switch box) 49 One 6A independent 5-pin socket point controlled by one no of 6A switch. (switch & socket are mounted in a independent switch box) 50 One 16A 5-pin socket point controlled by one 16A switch . (switch & socket are mounted in a seperate switch box ) 51 One 20A 5-pin socket point controlled by one 32A switch with indicator. (switch & socket are mounted in a seperate switch box for AC) 52 A2-Main Switch Board Panal 53 Supply, Erection, Testng and Commissioning of Indoor type Main Panel, Floor mounting tyoe, dust and vermin proof by construction of 14/16 swg CRCA sheets Compartmentalised, modular type IP 42 Protection with powder coated panel as specification below. 54 Digital Meter with Indicators Buzzer to be provided. 55 EB Incomer : 1 No - 125A, 4P, MCCB, 25KA Rating 56 DG Incomer : 1 No - 63A, 4P, MCB, 10KA Rating 57 ATS : 1 No - 125 A, 4P, ATS (Socomec - ATYSS) 58 Necessary single phasing preventer, LVMs and control contactors are giving due preference to the EB supply 59 Necessary timers are provided in all outgoings for ON DELAY feature at EB and DG supplies while changeover from one source to another 60 125A Aluminium Bus Bar 61 Outgoing : 40A, 4P, MCB, 10KA Rating - {Ground Floor Automation DB} 62 40A, 4P, MCB, 10KA Rating - {First Floor Automation DB} 63 40A, 4P, MCB, 10KA Rating - {Second Floor Automation DB} 64 63A, 4P, MCB, 10KA Rating - {Ground Floor Automation DB} 65 63A, 4P, MCB, 10KA Rating - {First Floor Automation DB} 66 63A, 4P, MCB, 10KA Rating - {Second Floor Automation DB} 67 63A, 4P, MCB, 10KA Rating - Terrace VTPN DB 68 32A, DP, MCB, 10KA Rating - Main [ELDB] 69 32A, DP, MCB, 10KA Rating - Main UPS DB 70 63A, 4P, MCB, 10KA Rating - {Lift} 71 63A, 4P, MCB, 10KA Rating - SPAREA 3 Nos 72 25A, DP, MCB, 10KA Rating - Ground Floor A/C DB 73 25A, DP, MCB, 10KA Rating - Second Floor A/C DB 74 25A, DP, MCB, 10KA Rating - Third Floor A/C DB 75 25A, DP, MCB, 10KA Rating - Bore Well 76 25A, DP, MCB, 10KA Rating - Sump 77 25A, DP, MCB, 10KA Rating - Gate Motor 78 25A, DP, MCB, 10KA Rating - Outdoor Utility DB 79 25A, DP, MCB, 10KA Rating - SPAREA 4 Nos 80 Cabling Top & Bottom Entry, All MCCBs shall be with Operating Handle 81 A3-Supply, Installation, testing and commissioning of surface/concealed type of main circuit wiring from panel/DB to DBs, DB to switch boxes and switch box to other switch boxes using 1100V grade PVC insulated multistranded FRLS copper wires, to be drawn through existing conduits. The items including cost ofbakelite connectors, crimping type ferrules, copper lugs, brass cup washers & brass screws, clamps & screws and bolt & nuts etc. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer. 82 3 runs of 1.5 sq.mm. FRLS copper wiring through PVC conduits. 83 2 runs of 2.5 sq.mm. & 1 run of 1.5 sq.mm. FRLS copper wiring through PVC conduits. 84 2 runs of 4.0 sq.mm. & 1 run of 2.5 sq.mm. FRLS copper wiring through PVC conduits. 85 A4-Supply, Installlation of surface/recessed type PVC/MS, rigid/flexible, conduits of the following sizes with required couplers, junction boxes, bends, ceiling/wall plates, metal boxes, draw boxes & top cover plate (3mm hylam sheet), clamps, screws, bolt & nuts and necessary fixing accessories etc. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer: 86 20mm dia 2mm thick rigid PVC conduits. 87 25mm dia 2mm thick rigid PVC conduits. 88 32mm dia 2mm thick rigid PVC conduits. 89 20mm dia 1.6mm thick rigid PVC conduits. 90 25mm dia 1.6mm thick rigid PVC conduits. 91 B1-DISTRIBUTION BOARD 92 Supply, Installation, testing and commissioning of three phase, phase segregated, compartmentalised 8 way TPN MCB DB WITH PPI KIT Double door type with IP 43 powder coated. 93 Incomer - 63A, 4P, MCB - 1 No 94 Sub Incomer - 63A, dp, RCCB (30mA) - 3 Nos 95 Outgoings - 6A, SP, MCB - 8 Nos 96 Outgoings - 16A, SP, MCB - 8 Nos 97 Outgoings - 20A, SP, MCB - 2 Nos 98 PPI KIT - 1 No 99 Including all interconnections and other associated fixing accessories and all as required as per the site conditions 100 8way 101 B2-Supply, Installation, testing and commissioning of following ways of surface/flush mounting, SPN MCB DBs of sheet steel, powder coated, IP43 protection, metal door and cable end box etc. The item including terminal connectors for all incoming and outgoing circuits, duly pre-wired with suitable size of FRLS PVC copper wires upto terminal blocks, tinned copper bus bar of suitable rating, neutral links, earth bars, detachable gland plate, interconnections by using crimping type ferrules & copper lugs, and engraving of laminated as-built circuit drawings in the door inside etc. The item including necessary chipping/cutting the wall and making good the same in case of flush mounting as required. All complete as per specifications, drawings and / or as directed by the Engineer: 102 12way 103 B3-Supply, Installation, Testing and Commisioning of single phase, 12way SPN MCB DB Double Door typr, with IP 43 powder coated 104 Incomer - 25A, DP, MCB - 1 No 105 Outgoings - 10A, Single Pole - 8 Nos 106 Including all interconnections and other associated fixing accessories & all as requited as per the site conditions 107 4way 108 C1-LUMINAIRES AND FIXTURES 109 Supply, Installation, testing and commissioning of following sizes of ceiling fan/wall fan, all complete as per specifications, drawings and / or as directed by the Engineer. 110 1200mm sweep 111 2 x 2 LED Lamp 112 D1-LT PANELS 113 Supply,Installation, testing and commissioning of 415V Metering board fabricated with 16G CRCA sheet steel, complete with 100Amps cut-out fuse carriers and outgoing as 125 Amps fuse switch unit. The item including the provision for multifunction meter and proper sealing arrangements etc. all complete as required by TNEB. 114 E1-LT CABLING 115 Supply, Laying, testing and commissioning of following 1.1KV grade multicore aluminium/copper conductor XLPE/PVC insulated GI round(upto 10sqmm) / flat(16sqmm and above) armoured PVC sheathed cables (without any cable joint) drawn through tray or steel supports or clamping on the ceiling/wall or pre-excavated / pre-formed trenches or GI pipe sleeves / hume pipes with suitable clamping arrangement and fixing accessories, cable routemarkers, cable ties, identification tags etc. all complete as per specifications, drawings and / or as directed by the Engineer. 116 3.5C x 16 sq.mm Copper Ar. XLPE cable 117 E2-Supply, Termination of the following sizes of 1.1KV XLPE/PVC insulated Al/Cu conductor cables with single compression brass cable glands and tinned copper lugs including gland earth clips, adequate size of bare copper wire connecting to the main bus bars etc. all complete as per specifications, drawings and / or as directed by the Engineer. 118 3.5C x 16 sq.mm Aluminium Ar. XLPE cable 119 G1-EARTHING 120 G2-Supply, Installation, testing and commissioning of earth station comprising of 50mm outer diameter and 3 meter length of GI earth electrode, including approved clamps, bolts & nuts, 450m x 450mm brick masonary chamber, heavy duty CI cover, homogeneous layers of earth enhancing backfilling materials (bentonite/fly ash) are placed around the earth pipe as per standards (IS 3043), the items including cost of excavation, backfilling of earth etc. all complete as per specifications, drawings and / or as directed by the Engineer. 121 25x3mm copper flat. QRO 122 8 SWG copper wire. 123 H1-TELEPHONE SYSTEM A) Supply, Fixing of RJ-11 modular type telephone outlet mounted on suitable zinc-passivated metal box complete with metal box, front plate, screws and fixing accessories etc.,The item including necessary chipping/cutting the wall and making good the same incase of recessed mounting and all complete as per specifications, drawings and / or as directed by the Engineer. 124 B) Supply, Laying and termination of high quality 2pair 0.5sq.mmcable preferably with FR PVC insulation to be laid in existing 19mm/25mm dia 1.6mm/2mm thick PVC pipe from individual telephone to krone connector box.The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer. 125 I- DATA & CCTV SYSTEM a) Supply, Fixing of RJ-45 modular type telephone outlet mounted on suitable zinc-passivated metal box complete with metal box, front plate, screws and fixing accessories etc.,The item including necessary chipping/cutting the wall and making good the same incase of recessed mounting and all complete as per specifications, drawings and / or as directed by the Engineer. 126 b) Supply, Laying and termination of high quality CAT 6 cable preferably with FR PVC insulation to be laid in existing 19mm/25mm dia 1.6mm/2mm thick PVC pipe from individual telephone to krone connector box. The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer. 127 J1-TELEVISION SYSTEM 128 a) Supply, Fixing of modular type television socket mounted on suitable zinc passivated metal box complete with metal box, front plate, screws and required fixing accessories etc.The item including necessary chipping/cutting the wall and making good the same in case of flush mounting as required. All complete as per specifications, drawings and / or as directed by the Engineer. 129 b) Supply, Faying and termination of closed circuit television co-axial RG6 cable laid in existing 1.6mm/2mm thick 19mm/25mm dia PVC conduit & accessories from dish to individual TV.The item including necessary chipping/cutting the wall and making good the same in case of recessed conduit as required. All complete as per specifications, drawings and / or as directed by the Engineer. 130 A:SANITARY FIXTURES AND CP FITTINGS: 131 Collecting from stores fixing, testing and commissioning of glazed white vitreous wall mounted European water closetMS / CI chair brackets, fischer bolts with CP bolts / nuts and with PVC flush tank , solid plastic seat and lid with heavy duty CP hinges and rubber buffers and flap etc. The work shall include cutting making of walls and floors etc. Notes:EWC with accessories will be provided by Client necessary consumables like brass screws, CP extension nipple of approved make, dia and length, wooden plugs, white cement, sealants etc.,Only drilling machines shall be used for making the holes in the walls for fixing, no wall jumper and hammer will be allowed. 132 Supply: 133 Fixing : 134 Collecting from stores, shifting to the place of installation and fixingtesting and commissioning of glazed white colourvitreousRectangularwash basin installed below granite/ marble with CI / MSbrackets, 15mm dia CP pillar cock fitting, 32mm dia CP waste coupling with plug and chain,32mm dia CP brass bottle trap,1 nos15 mm dia- 450mm long PVC / CPcold watersupply connecting pipe, 1 no of 15mm dia CP angle stop cock forcold watersupply liness with wall flange etc., The works shall include cutting in walls and making good the walls & floors. Size of wash basin 55 x 40cm.(Granite / Marble counter will be installed by other agency) 135 Supply: 136 Fixing : 137 Collecting from stores, shifting to the place of installation and fixing, testing and commissioning ofCP health faucet consisting of: 138 CP angle stop cock with wall flange. 139 PVC flexible tube. 140 Hand operated spray unit (instant type) 141 Supply: 142 Fixing : 143 Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of 15mm dia CP long body bib cock with CP wall flange etc. 144 Supply: 145 Fixing : 146 Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of15mm diaCP sink cock with swinging spout (wall mounted model) for kitchen sink with CP wall flange etc. Notes: Conditions mentioned in item no.1 shall be applicable. 147 Supply: 148 Fixing : 149 Collecting from stores, shifting to the place of installation and fixingtesting and commissioning of 15mm dia CP brass angle stop cock with wall flange and 15mm dia PVC connecting pipe for aquaguard & washing machine as specified in the drawings. 150 Supply: 151 Fixing : 152 Collecting from stores, shifting to the place of installation and fixing, testing and commissioning ofCP brass concealed stop cock with adjustable wall flange for master control in first floor toilets. Notes: Conditions mentioned in item no.1 shall be applicable. 153 20 mm dia 154 Supply: 155 Fixing : 156 B : CPVC / UPVC PIPES AND FITTNGS (INTERNALAND EXTERNAL WATERSUPPLY): 157 Providing, fixing, testing and commissioning ofCPVC / jindal composite pipes confirming to ASTM standard including all CPVC / jindal composite fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 4 hours etc. making holes,including chasing in solid block masonry walls with groovecutting machine to required width and depth, making bores in walls,foundations and RCC slabs, making good the walls and bores in CC or CM 1:3 as applicable clearing the debris, grouting of concealed pipes, MS hooks for fixing pipes and making good the walls and floors. 158 Note: Strictly use SDR-11 grade Flow guard - CPVC pipe and fittings for internal cold water supply up to 50 mm dia. 159 Notes: Rate Quoted shall be inclusive of cost of other consumables like hacksaw blade, solvent for CPVC pipeof make IPS - Flow guardup to 50 mm dia etc. 160 INTERNAL (CONCEALED IN WALL): 161 COLD WATERSUPPLY - HI & LOW PRESSURE 162 20 mm dia(SDR-11 /COMPOSITE PIPES )Supply: 163 Fixing: 164 INTERNAL (CONCEALED IN WALL): 165 HOT WATERSUPPLY 166 Note: Strictly use SDR-11 grade Flow guard - CPVC pipe and fittings for internal hot water supply up to 50 mm dia. 167 Notes: Rate Quoted shall be inclusive of cost of other consumables like hacksaw blade, solvent for CPVC pipeof make IPS - Flow guard up to 50 mm dia etc. 168 20 mm dia (SDR-11 /COMPOSITE PIPES )Supply: 169 Fixing : 170 Providing, fixing, testing and commissioning ofCPVC & UPVC pipes confirming to ASTM standard including all CPVC & UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. The work shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 4 hourshours etc., fixed on to the wall in vertical shafts / terrace with fabricated MS brackets of suitable size with GI U clamps, bolts, nuts and GI washers includingMS brackets including making good the walls and floors. 171 SHAFT / TERRACE & RING MAIN PIPING:COLD WATER SUPPLY - CPVC & UPVC 172 20 mm dia -(SDR-11)Supply: 173 Fixing : 174 25 mm dia -(SDR-11) Supply: 175 Fixing : 176 32 mm dia -(SDR-11) Supply: 177 Fixing : 178 40 mm dia -(SDR-11)Supply: 179 Fixing : 180 50 mm dia -(SDR-11)Supply: 181 Fixing : 182 25 mm dia- SCH 40 pumpingSupply: 183 Fixing : 184 32 mm dia- SCH 40 pumpingSupply: 185 Fixing : 186 40 mm dia - SCH 40 (gravity supply GF) Supply: 187 Fixing : 188 50 mm dia - SCH 40 (gravity supply GF) Supply: 189 Fixing : 190 HOT WATER SUPPLY& RETURN -CPVC 191 20 mm dia - SDR-11Supply: 192 Fixing : 193 25 mm dia - SDR-11Supply: 194 Fixing : 195 32 mm dia- SDR-11 Supply: 196 Fixing : 197 AC DRAIN STACK 198 32 mm dia (Type B / 6kg / sq.cm) Supply: 199 Fixing : 200 Providing, fixing, testing and commissioning ofFlow guard CPVC & UPVC pipes confirming to ASTMstandard including all CPVC & UPVC fittings like tees, elbows, bends, unions, coupling, reducer tees, collars etc. Thework shall include cutting jointing with solvent cement pressure testing the joints / pipeline for 10 kg/sq.cm hydraulic pressure, for 4 hours etc., laid burried underground. 201 UNDER GROUND BURRIED PIPING:GARDEN & PUMPING LINE 202 COLD WATER SUPPLY - UPVC 203 20 mm dia - SCH 40 Supply: 204 Fixing : 205 25 mm dia - SCH 40Supply: 206 Fixing : 207 32 mm dia- SCH 40 (pumping)Supply: 208 Fixing : 209 40 mm dia- SCH 40 (gravity supply & garden GF) Supply: 210 Fixing : 211 25 mm dia - SDR-11(GF Burried)Supply: 212 Fixing : 213 Providing, fixing, testing and commissioning ofball valves of brass body nickel plated with stainless steel ball, lever operatedand tested to 20kg / sq.cm. 214 20 mm dia Supply: 215 Fixing : 216 25 mm dia Supply: 217 Fixing : 218 32 mm dia UPVC Supply: 219 Fixing : 220 40 mm dia Supply: 221 Fixing : 222 50 mm dia Supply: 223 Fixing : 224 Providing, fixing, testing and commissioning ofslimseal flap type check valve / NRV with CI body and cast steel disc pressure rating PN-10 Kg / sq.cm make Intercalve. 225 20 mm dia Supply: 226 Fixing : 227 25 mm dia Supply: 228 Fixing : 229 32 mm dia Supply: 230 Fixing : 231 50 mm dia Supply: 232 Fixing : 233 Providing, fixing,testing and commissioning of suction `Y / pot stainer with MS flange of suitable length fabricated from 16 gauge brass sheet with 3mm slots. 234 32 mm dia Supply: 235 Fixing : 236 40 mm dia Supply: 237 Fixing : 238 50 mm dia Supply: 239 Fixing : 240 C: PVC SOIL,WASTE,VENT PIPES AND FITTINGS ( INTERNAL & EXTERNAL) 241 Providing, fixing,testing and commissioning of PVC soil, waste and vent pipe confirmingto IS 13592 of SWR quality Type B /6 kg / sq.cm pressure rated including all fittings, like Bends, Tees, Elbows, Collars, junction, offsets, access pipes, jointing withsolvent cement followed by application of leak proof adhesive like FRP paste & laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete 1:2:4 as applicable, curing etc., complete. 242 Notes: 243 Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw bladeetc. 244 INTERNAL: 245 75mm dia (Type B / 6kg / sq.cm) 246 Supply: 247 Fixing: 248 110mm dia(Type B / 6kg / sq.cm) 249 Supply: 250 Fixing: 251 Providing ,fixing,testing and commissioning of PVC soil, waste and vent pipe confirming to IS 13592 of SWR quality type B /6 kg / sq.cm pressure rated, including all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed byapplication of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for soil and waste pipe lines laid in vertical shafts. 252 Notes: 253 Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw bladeetc. 254 EXTERNAL : 255 75mm dia (Type B / 6kg / sq.cm) 256 Supply: 257 Fixing: 258 110mm dia (Type B / 6kg / sq.cm) 259 Supply: 260 Fixing: 261 Providing ,fixing,testing and commissioning of PVC soil and waste pipes for underground drainage line layed under the soil with required slops, confirming to IS 4985 of Agricultural series - 6 kgs / sq.cm pressure rated with necessary specials of required size jointing withsolvent followed by application leak proof adhesivesof FRP paste, including haunching / covering the joints with cement concrete 1:3:6 at all the joints and testing of joints etc. complete 262 Notes: 263 Rate is excluding for earthwork and backfilling. It shall be measured separate and paid for. 264 Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw bladeetc. 265 160mm dia(6kg / sq.cm / foam core - SN8) 266 Supply: 267 Fixing: 268 Providing, fixing,testing and commissioning of PVC multi inlet floor trap of self cleansing design moulded or fabricated, if not available in size mentioned below, with or without vent armjointing withsolvent cement followed by application of leak proof adhesive like FRP paste including encasing all round fixing the floor trap in cement concrete1:2:4 ratio of size 300 x 300 mm x 250 mm height (approx) and making good the floors. 269 110mm dia inlet 75mm dia out let 270 Supply: 271 Fixing: 272 110mm dia inlet 110mm dia out let - P TRAP 273 Supply: 274 Fixing: 275 Providing and fixing CP grating of 6mm thick with rim including setting in floor with white cement mortar and making good the floor (Chilli Make). 276 Cock roch trap grating 277 125mm diaSupply: 278 Fixing: 279 Ordinary grating 280 125mm diaSupply: 281 Fixing: 282 Providing and fixing testing and commissioning of PVC waste pipe of agricultural sereis confirming to IS 4985 including all fittings like tees, elbows, bends, collars, coupling, etc jointing with solvent cement followed by application of leak proof adhesive like FRP paste laid on floors inside the toilets to the required slope including making necessary bores in walls / foundations / concrete slab as applicable, making good the bores with CM 1:3 or cement concrete as applicable, curing etc., complete. 283 Wall chasing shall be done with chasing machine to required lines and levels. 284 Rate Quoted shall be exclusive of cost of cement, sand and other consumables like hacksaw bladeetc. 285 40 mm dia (15kg / sq.cm) Supply: 286 Fixing: 287 50 mm dia (15kg / sq.cm) Supply: 288 Fixing: 289 D: PVC RAIN WATER PIPES AND FITTINGS 290 Providing ,fixing,testing and commissioning of PVC rain waterpipe confirming to IS 13592 of SWR quality 6 kg / sq.cm pressure ratedincluding all fittings, like Bends, Tees, Elbows, Collars, junction, inspection doors, cowls, offsets, access pipes, jointing with rubber ring / solvent cement followed by application of leak proof adhesive like FRP paste, fixed to wall with properly fabricated MS bracket of suitable size, GI U clamps with bolts, nuts and GI washers complete, for rain water pipe lines laid in vertical shafts. 291 75mm dia (Type B / 6kg / sq.cm) 292 Supply: 293 Fixing: 294 110mm dia(Type B / 6kg / sq.cm) 295 Supply: 296 Fixing: 297 E: OTHER PLUMBING EQUIPMENTS 298 Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of Booster pump(1 to 3 HP)with pressure tank, including a set of inlet , outlet connections, ball valve, NRV,suitableflanges,, bolts, nuts GI washers, etc., complete. 299 Fixing: 300 Collecting from stores, shifting to the place of installation and fixing, testing and commissioning of Open well sub water transfer pump (1 to 3 HP) with auto level control, including a set of inlet , outlet connections, ball valve, NRV,suitableflanges,, bolts, nuts GI washers, etc., complete.for municipal water & Filter water 301 Fixing: 302 As per IS: 13592-1992, TYPE A pipes are recommended for use in ventilation pipe work and rain water application and TYPE B pipes are recommended for use in soil and waste discharge system. 303 Laying of weathering coarse in cm 1 :5 using red clay tiles including cost of all material & labour charges. 304 Laying of paver block on outer area using un-polished cement blocks of approved design over a layer of baby chips and compacting the same using plate compactor including cost of all materials and labour charges etc., 305 Supplying of TMT Steel for all RCC works including cutting, bending, tying and placing in position including cost of materials and transport. 306 Providing, fabricating & installing in position 4mm thickness 0.25mm skin aluminium composite cladding of PIONEER, ALUTECH, ALSTRONG are protected with self adhesive protection film by erecting over the wall using aluminium frames @ desired levels made with 50 x 25 x 1.2mm extruded channel sections confirming to IS-7333 mechanical properities. The frame shall be fixed on external wall surface with necessary brackets, bolt nut arrangements with screws aluminium L cleats, backer rod, wacker / dowcorning silicon sealant etc.,@all levels & heights & silicon sealant is filled in complete as per specification & design approved by the authority. 307 Front and Side Elevation 308 Designing, Fabricating, Protection, Cleaning, installing and Fixing in position Semi - Glazing System / Glass Curtain using using aluminium frames @ desired levels,The frame shall be fixed on external wall surface with necessary brackets, bolt nut arrangements with screws aluminium L cleats, backer rod, wacker / dowcorning silicon sealant etc.,@all levels & heights & silicon sealant is filled in complete as per specification & design approved by the authority. 309 Front and Side Elevation

BRR:7635426 1. Repairing Of Mast Ladder, Welding Work Of Cabin Mtg. And Mast Body, Repair Work Of Compressor And Engine Mounting With Fitment Work, Platform Crack Welding Mtg. Hole Making And Drive Shaft Opening Material Depositing Work. 2. Repair Of Chassis Eye

BRR:7635369 Tender For PROVIDING FIXING Water Supply Connection from GMDA pipeline including installation of water meter for gurugram university, Sector-87 Gurugram

BRR:7635261 Special repair works in the damaged parts between chainage 0.673 to 2.545 at the places of flood erosion on the additional approach road of the bridge on Devha river on the old Bisalpur road near Nagariya Fatehpur and 4 box culverts of 2 cells (3x3 meter span) at different places between chainage 1.41 to 2.506, approach road and protective works.

BRR:7635259 Widening And Strengthening Work In Chainage 0.000 To 18.800 Of Atarra Oran Chausad Road -Length 18.800 Km- Utility Shifting -Work Of Removal Of Electric Poles Etc-

BRR:7635113 Short Limited Tender For Supply, Installation And Commissioning Of Cctv Surveillance Cameras, Two Way Radio System And Body Worn Cameras On Rental Basis And Supply Of Communication Equipments-4MP Dome IR Varifocal 2 4MP Bullet IR Varifocal 3 PTZ Camera 4 3MP 4G Camera 5 NVR 8 SATA-64CH 6 128 Chanel NVR with 8 SATA HDD Support of 8TB 7 128 Chanel NVR with 8 SATA HDD Support of 10TB 8 Desktop Computer Intel core i5(with Windows Pro) 9 Smart semi-managed POE Switch 8 Port 10 Smart semi-managedPOE Switch 24 Port 11 Pole with concreate 12 RACKS 17U 13 STORAGE 8 TB Surveillance SATA HDD 14 STORAGE 10 TBSurveillance SATA HDD 15 HDMI cable 16 SOLID CABLE CAT 6,4 PAIR,UTP-per Mtrswith laying, termination& installation 17 1 Meter Dual Ended Mounting UTP Cat 6 patch Cord 18 3 core 2.5sq.mm. ElectricCable with installationper mtr. 19 Power extension Box with 4 socket 20 25 mm Casing Caping 21 4 Way MCB Box withinstallation 22 MCB- 63 Amp 23 MCB- 40 Amp 24 Outdoor Installation Box 25 Outdoor enclosure/Rack 26 SFP Trancereciver sm 27 Patch Cord,SM(OS2),Duplex LC-SC,PC Type3M 28 LIU 24 Port Rack Mount 29 Pigtail,SM, Simplex SC Type 1M 30 256 GB Micro SD Memory Card 31 6 Core outdoor armored cable –SM 32 Fibre Cable Laying 33 Display Units 40/43 LED TV 34 60 KVA UPS 35 Fibre Termination 36 Installation for CCTV(Per Camera) 37 Service Engineer 38 16 Chanel NVR 39 Camera : High quality imaging with 4 MP resolution 40 Video Software 41 75 Interactive Display with Stand 42 PTZ Camera Camera with 10X Optical Zoom 43 ALL IN ONE SPEAKERPHONE 44 1 KVA ONLINE UPS => Limited

BRR:7634966 PROVN AND INSTALLATION OF PREPAID ELECTRICITY METERS FOR JODHPUR MIL STATION. Job No. 002/AMWP/12C/2023-24 vide HQ 12 Corps Q(Wks) Br A/A letter No. 5701/Instln/Pre-Paid Meters/Jpur/23-24/Q3W dt 06 Nov 2023

BRR:7634952 Tender For Special Repair To Roof Treatment In Plot No 02, Sector 37-A Chandigarh; 1 Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises complete all as specified and directed 2 Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:4) complete all as specified and directed 3 All as per serial item no. 2.00 above but except bricks -ditto- 4 Demolishing cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. 5 Material and labour for cement concrete 1:2:4 type B-0 using 12.5mm graded asin coping as in brick wall duly rounded or chamfered on edges complete all as specified and directed. 6 Material and labour for cement concrete 1:2:4 type B-1 using 20mm graded as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed. 7 Taking down cement plaster on brick or stone or concrete walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. 8 Material and labour for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4) using WPC with fair finish without using extra cement complete all as specified and directed.Note : WPC shall be measured and paid for separately 9 Material and labour for finishing walls with Acrylic Smooth exterior paint of required shade for new work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. 10 Demolishing of brick tiles or terracing tiles in single layer on roofs complete all as specified and directed. 11 Demolition of mud phuska of any thickness, including plastering and leaping complete all as specified and directed. 12 Material and labour for ready mix concrete (low density thermal insulative concrete of density 1200 kg/cum) grade (M-25) obtained from plant approved with MES as in roofs, terraces, sunken and other locations as per site requirements laid through RMC with suitable arrangements of pumping etc complete all as specified and directed. 13 Material and labour for screed bed or bedding in two layer (each layer of 10mm thick) 20 mm thick screed bed or bedding layer in CM (1:4) mixed with WPC in second layeras per manufacturer instruction for laying of APP membranecomplete all as specified and directed. Note : WPC shall be measured and paid for separately 14 Supply only integral water proofing compound (ISI Marked) of best quality complete all as specified and directed. 15 Material and labour for wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown bitumen of any penetration applied hot @ 1.7 kg per sqm. blinded with grit or pea size gravel @ 0.006 cu. m per sqm, and lightly tampered (area of flashings, etc., shall be added to the roof area and priming surfaces and apply normal treatment for moderate conditions, using glass fibre base bitumen felt, grade 2 and material and labour for APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced with polyester non-woven fabric (weight not less than 150 gms/sqm) laid on primed surface by forced application and finally finished with one coat of bituminous aluminium primer at 100 gm per sqmtop of the membrane, including dismantling existing felt complete all as specified and directed. 16 Material and labour for 0.71 mm thick plain aluminium sheeting, alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) for covering the crumple/expansion joints fixed with aluminium alloy screws complete all as specified and directed. 17 Dismantling water tanks (exc 500 and n. exc 1000 ltrs) and removing from site complete all as specified and directed. 18 Supply and fixing for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top with threaded lid) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs.20 mm dia ball valves high pressure of brass with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed and tank nipple of suitable size & check nuts complete all as specified and directed. 19 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed 20 Fixing only in steel tubing and connection 15 mm dia bore complete all as specified and directed. 21 Supply and fixing forGI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. 22 Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed. 23 Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and directed. 24 Supply and fixing forGI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed. 25 Supply and fixed in repair 15 mm stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 26 Supply and fixed in repair 20 mm Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. 27 Material and labour for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) etc Fe-410W (gde E 250) quality A complete all as specified and directed. 28 Material and labour for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not other wise described and apply two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. 29 Supply and fixed in repair PVC (SWR) 110 mm bore of pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 30 Supply and fixed in repair PVC (SWR) 110 mm bore of bends any radius complete all as specified and directed. 31 Supply and fixed in repair PVC (SWR) 75 mm bore of pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. 32 Supply and fixed in repair PVC (SWR) 75 mm bore of bends any radius complete all as specified and directed. 33 Removing building material exc. 1.50 km but n exc. 5 km and depositing where directed complete all as specified and directed.

BRR:7634947 Repair/Maintenance Of Lt Infrastructure And Connected Services At Water Supply Installations Under Ge (Utilities) Udhampur

BRR:7634923 Smart Periodical Services For Various Areas At Guwahati Under Ge Guwahati; 1 Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. 2 M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surfaces of wall complete all as specified and as directed. 3 Preparation of old decorated surfaces on ceilings and applying one coat of white wash complete all as specified and as directed. 4 M&L for preparation of old distempered surfaces of wall including cornices etc. by washing, rubbing down, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade complete all as specified and as directed. 5 M&L for preparation of old distempered surfaces of wall including cornices etc. by washing, rubbing down, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade complete all as specified and as directed. 6 Material and labour for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturers instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat of the prepared mix with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI. Step3) Allow 6-8 hrs time to dry the putty surface. NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c)The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work.The authorisation letter needs to be valid for the complete period of execution of the painting work. (d)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate. 7 Material and labour for one coat of acrylic water based exterior grade primer @0.9 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c)The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work.The authorisation letter needs to be valid for the complete period of execution of the painting work. (d)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate. 8 Material and labour for one coat of acrylic water based interior grade primer @0.8 ltr (undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c)The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work.The authorisation letter needs to be valid for the complete period of execution of the painting work. (d)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate. 9 Material and labour for two coats of water based premium acrylic smooth exterior emulsion of approved colourwith silicon additive & Colour stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algae properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as specified and directed. NOTES :- (a) The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (b) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (c)The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work.The authorisation letter needs to be valid for the complete period of execution of the painting work. (d)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (e) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (f) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (g) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (h) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (j) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate. 10 M & L forpreparation of old treated plastered surfaces of wall and applying two coats of cement base paint using auto roller for making the surface uniform complete all as specified and as directed. 11 M&L for preparation of old painted surfaces of wood and wood based materials of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tintedcomplete all as specified and as directed. 12 M&L for preparation of old painted surface of steel and iron of any description, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tintedcomplete all as specified and as directed. 13 Material and labour for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surfacecomplete all as specified and directed. Note: Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication). NOTES:- (a) Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer. Proper masking to be carried out before primer and paintapplication). (b)The work pertaining to periodical services & Water Proofing shall be executed by authorized applicator through manufacturer of which the materials i.e. Paint, Distemper,Putty etc. is proposed to be used by the contractor and approved by GE. (c) The cost of scaffolding upto 10m height of building shall be included in the quoted rate. (d)The contractor shall upload MOU letter with any one of manufacturer and also with their authorised applicator mentioned in the tender alongwith their bid in cover-I failing which his bid will be rejected. Authorised applicator shall have valid authorisation letter from the manufacturer (Minimum regional HQs) and shall have been issued not less than 30 days from the date of commencement of the work. The authorisation letter needs to be valid for the complete period of execution of the painting work. (e)After preparation of the surface, Engr-in-Charge shall approve the same before applying primer and finishing coats. (f) Building wise stage passing register shall be maintained and shall be signed by Engr-in-Charge and contractor. (g) The equipments to be used in the work shall be certified by the manufacturer with whom the MOU been entered into. (h) Contractor shall submit approved company generated 05 years warranty card at the time of submission of RAR & Final Bill. 15% amount of this item will be retained in FB for a period of 05 years from the certified date of completion. (j) Masking of windows / doors during spray painting using polythene film is inluded in the quoted rates. (k) Cleaning and clearing of site of painting, mats etc after completion of work is included in the quoted rate. 14 Taking down cement plaster, any description, on brick or stone walls, etc.including racking out joints, hacking for key, scrubbing down with water, etc. including removal of rubbish material away from site, complete all as specified and as directed by Engineer-in-charge at site. 15 Material and labour for plastering 10 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed. 16 Material and labour for plastering 15 mm thick (in two layers of 10mm and 5mm thk) on other than fair faces of brick wall or concrete surfaces upto 03 storied height in cement mortar 1:4 with liquid water proofing compound @ 200ml/ 50kg cement finished even and fair complete all as specified and directed. Note: Water proofing compound shall be measured and paid for separately. 17 M&L for preparing of newly plastered wallsurface andapplying two coats of cement base paint with auto roller for making the surface uniform over a coat of Suitable primer complete all as specified and as directed. 18 M & L for preparation of newly plastered surface of wall and applying two coats of distemper oil emulsion with auto roller for making the surface uniform over one coat of chalk whitening primer complete all as specified and as directed 19 M&L for preparingold decorated plasteredsurfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and as directed. 20 Supply only liquid water proofing compound. 21 M & L for preparation of old painted wood or wooden surfaces, of any description, not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying one coat of synthetic enamel paint complete all as specified and as directed. 22 Preparation of old steel surface of any description not exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. 23 M & L for writing letters or figures in (Roman/ Indic Script) (Bold/ Italic/ Capital/ Smaller type) not exceeding 30 cm in height with synthetic enamel paint complete all as specified and as directed. 24 M & L for writing punctuations marks (stops, commas, dashes, hyphens, brackets, paragraph marks etc.) in (Roman/ Indic Script) (Bold/ Italic type) with synthetic enamel paint complete all as specified and as directed.

BRR:7634878 Bids Are Invited For Purchase Of 3 Phase 4 Wire Digitalelectronic Tri- Vector Energy Meter For Measuring Units Generation Purchase Of 3 Phase 4 Wire Digital-Electronic Tri- Total Quantity : 8

BRR:7634861 Bids Are Invited For Conductivity Meter With Sensor Total Quantity : 10

BRR:7634820 Bids Are Invited For Da Fuze Generation Of Specifications Qap And Mqap , Cost Of Testing Charges , Cost Of Tooling Dies And Fixtures , Srgm Heda Ammunition Prototype , Srgm Heda Ammunition Ioq , Bracket (Defence) Total Quantity : 163

BRR:7634819 Bids Are Invited For Element Part No- 80001771 , Element Part No- 23040988 , Element (Transmission) Part No- 452Ptb0027 , Element Filter Compressor Aluminium Conductors For Overhead Transmission Total Quantity : 36

BRR:7634798 Bids Are Invited For Supply Of Electrical Items For Maintenance Frlsh Copper Wire , 1.5 Sq. Mm. Frls Copper Wire , 2.5 Sq. Mm Frls Copper Wire , 4 Sq. Mm. Fels Copper Wire , 3 Core 6 Sq. Mm Btc Cable , 3 Core 1.5 Sq. Mm Unarmoured Copper Cable , 3 Core 2.5. Sq. Mm Unarmoured Copper Cable , 3 Core 4 Sq. Mm Unarmoured Copper Cable , Single Pole C Miniature Circuit Breaker , 2.5 Mfd Fan Capacitor , 3.15 Mfd Fan Capacitor , Pvc Black Tape , Empire Tape , 33 Kv Lightening Arrestor Gl Clamps Bolts And Nuts With Washers , 33 Kv Pin Insulator With Pin Washers And Nuts , 33 Kv Drop Out Fuse Element , Single Phase Energy Meter , 3 Phase Energy Meter , 9 10 Watt Led Mirror Light Fiting , Heating Element Of 15 25 Ltrs Capcity Water Heater , Brass Batten Holder , 15 16 A 3 Modular Switch Socket Combined Box , 2 Pin Male Female Adapter Plug Top , Casing Pin , 6 Mm X 75 Mm Steel Fastner , 40 Amps Dp C Miniature Circuit Breaker , 63 Amps Tpn C Curve Miniature Circuit Breaker , 20 A Wire Connector , 400 Amps 33 Kv Drop Out Fuse Connector 2 52 , Modular Electrical Enclosure Switch Board Boxes For Modular Type Accessories Total Quantity : 4863

BRR:7634590 Tender For Maintenance Works Of Administrative Building Staff Quarter And Other Buildings Of Jalpaiguri Govt Engineering College Under Jalpaiguri Construction Division Pwd During The Year 202526 Sp Work 2Nd Call - 1 Labour for dismantling G.I. pipe with fittings.(i) 15 mm 2 (ii) 20 mm 3 (iii) 25 mm 4 (v) 40 mm 5 (vi) 50 mm 6 Refixing G.I. pipe with fittings after cleaning where necessary.(i) 15 mm 7 (ii) 20 mm 8 (iii) 25 mm 9 (v) 40 mm 10 (vi) 50 mm 11 Removing chokage in G.I. pipe including cleaning pipe.(i) 15 mm 12 (ii) 20 mm 13 (iii) 25 mm 14 (v) 40 mm 15 (vi) 50 mm 16 Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm dia 17 Uprooting and removing plants from the surface of walls parapet etc and making good damages. Repairing of damages to be paid separately.(a) Small plant of girth of exposed stem upto 75 mm. lift upto 6 mtr. 18 Supplying, fitting & fixing UPVC pipes AType and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.A) UPVC Pipes:(ii) 110 mm. Dia. 19 B) UPVC Fittings:a) Plain Tee(ii) 110 mm. Dia. 20 c) Bend 87.5 degree110 mm dia 21 Removal of rubbish,earth etc. from the working site and disposal of the same beyond thecompound, in conformity with the Municipal / Corporation Rules for such disposal, loading intotruck and cleaning the site in all respect as per direction of Engineer in charge 22 Supplying, fitting and fixing bib cock or stop cock.(a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 23 (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar 24 (d) (i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 25 (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent)15 mm 26 Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges.(i) 450mm x 300mm 27 Supplying, fitting and fixing towel rail with two brackets.(a) C.P. over brass(i) 25 mm dia. and 450 mm long 28 Supplying, fitting and fixing soap holder.(a) PTMT(Prayag or equivalent) 29 Supplying, fitting and fixing pillar cock of approved make.a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model - Tropical / Sumthing Special of ESSCO or similar brand). 30 f) (ii)CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (CodeNo.5041 & Model - FLORENTINE of JAQUAR or similar brand) 31 Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.450 mm long 32 Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps.900 mm long 33 Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. 34 Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C.(ii) Plastic (hallow type) white 35 Supply of galvanised iron socket with I.S.I. mark.15 mm dia 36 20 mm dia 37 25 mm dia 38 Supply of G.I. plain equal elbow of approved brand and make.15 mm dia 39 20 mm dia 40 25 mm dia 41 Supply of G.I. plain tee of approved brand and make15 mm dia 42 20 mm dia 43 25 mm dia 44 Supply of G.I. nipple standard 50 mm long.15 mm 45 20 mm dia 46 25 mm dia 47 Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm15 mm 48 20 mm dia 49 25 mm dia 50 Labour for fitting and fixing G.I. specials including cost of jointing materials.(b) Socket, Reducing socket, Bend, Plain equal elbow, Reducing elbow, Nipple, Short piece.(i) Upto 25 mm dia. 51 c) Plain tee, Reducing tee, Pendent tee, Jamnut, Socket and Nipple.(i) Upto 25 mm dia. 52 Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992(A) (i) Single Socketed 3 Meter Length(b) 110 mmPVC Pipes 100 mm dia 53 Renewing C.I. clamp for pipe including cutting hole in wall etc. and mending good all damages with cement concrete(4:2:1) with jhama chips and cement plaster (6:1) to match with and curing.(ix) 100 mm 54 Supplying, fitting & fixing approved patent vent cowl I.C.I. conforming to I.S.S and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately).(ii) 75 mm dia. 55 Cleaning I.P.W.C. with acid. 56 Cleaning urinal with channel with acid. 57 Cleaning wash basin/ sink with acid. 58 Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(i) 15 mm dia. medium quality 59 (ii) 20 mm dia. medium quality 60 (iii) 25 mm dia. medium quality 61 Supplying, fitting and fixing shower of approved brand and make.(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 62 (a)(iii) Chromium plated shower arm 240 mm long (Equivalent to Code No.536(A) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 63 (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). 64 (h) Polythene overhead shower of approved make15 mm X 125 mm 65 Cleaning silt of inspection pit. 66 Cleaning and disinfecting upto 2000 litre Water Tank including masonryreservoir. 67 Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets.(i) 450 mm X 300 mm size 68 Add GST @ 18% 69 Add Labour Welfare Cess@ 1%

BRR:7634574 Temporary Electrical Installation Work Including Hiring Of Dg Sets For Utility And Broadcasting In Connection With The Upcoming 134Th Durand Cup Tournament 2025 To Be Held At Vivekananda Yuba Bharati Krirangan Salt Lake

BRR:7634530 Supply Of Stationary And Sanitary Articles At Jalpaiguri Zilla Parishad Office Jalpaiguri , Peon Book- Neelgagan (15.50 Cm X 19.50 Cm) , Godrej Red Hit (200 Ml) , Godrej Black Hit (200 Ml) , Odonil Air Freshener , Alpin (100 Gms) - King , Eveready Ultimaalkaline Battery (Aa Size) , Eveready Ultima Alkaline Battery (Aaa Size) , Oddy Binder Clips (19 Mm - 12 In A Box) , Oddy Binder Clips (25 Mm - 12 In A Box) , Supermax Blade , Bleaching Powder - 500 Gm , Oxford Board File , Board Pin (Colour) - Good Quality , Board Pin (Steel) - ­ Good Quality , Oxford Bound Register No.4 (Ruled) , Oxford Bound Register No.6 (Ruled) , Oxford Bound Register No.8 (Ruled) , Oxford Bound Register No.10 (Ruled) , Oxford Bound Register No.12 (Ruled) , Oxford Bound Register No.14 (Ruled) , Oxford Bound Register No.16 (Ruled) , Oxford Bound Register No.18 (Ruled) , Oxford Bound Register No.20 (Ruled) , Godrej Nav-Tal (5 Liver) , Godrej Nav-Tal (7 Liver Deluxe) Brass Padlocks , Godrej Sherlock (70 Mm) Brass Padlocks , Broom (Coconut Jharu) - Good Quality , Broom (Phool Jharu) - Good Quality , Bucket (Balthi) - Good Quality (20 Lit) , 16 Inch Busket (Dustbin) , Orpat (12 Digit) Calculator , Orpat (12 Digit) – Desktop Calculator , Ambi Pur Car Freshener , Carbolic Acid (Indian Drug House - 100 Ml) , Kores Super 503 (210 Mm X 330 Mm) Carbon Paper , Primaxinch Cello Tape (50 Meter Brown) , Primaxinch Cello Tape (50 Meter White) , Channel File (A4 Size) - Good Quality , Channel File (Fs Size) - Good Quality , Citronella Oil (100 Ml) - Banaja (W.B.F.D.C.Ltd.) , Clear File - Good Quality , Cloth Bound Envelop (10 Inch X 12 Inch) , Faber - Castell Correction Pen , Cotton Duster (36X36) - Good Quality , Cotton Tag (Length - 22 Cm) , Oxford Plastic Coated Cover File , La Opala Cup & Saucer , Neelgagan Dak Pad (Thick Pvc Flap) , Desk Calendar - Good Quality , Desk Calendar Stand - Good Quality , Times Documents File , Bilt Double Foolscap White Paper , Apsara Eraser (Rubber) , Printed File Cover - Good Quality (26 Cm X 35.50 Cm) , Floor Cleaner Liquid Lizol (1000 Ml) , Miltonfloor Cleaner Mop With Steel Handle , Galvanized Trunk (Big Size - Good Quality) , Gala (50 Cm X 55 Cm) Garbage Bag (20 Micron) , Colin Glass Cleaner (500 Ml) , Pidilite Fevi Stick (25 Gm) , Guard File - Ambassadar , Gum Paste - Camel (700 Ml) , Highlighter Pen - Luxor (Gloliter) , 8 Inch Knife With Plastic Handle - Good Quality , Lever Arch File - Jyoti (Export Quality) , Lever Arch File (Pvc Cover)- Jyoti (Export Quality) , Lifebuoy Hand Wash (190 Ml) , Good Knight Liquid Vaporizers , Good Knight Liquid Vaporizers Machine , Good Knight Low Smoke Coil , Measurement Tape (100 Metre) , Measurement Tape (200 Metre) , Measurement Tape (50 Metre) , Oxfordmeasurement Book , Camlin Multipurpose Marker , Doctors Jadu (1000 Ml) - Muriaticacid Bottle , Naphthalene Balls (Bengal Chemical) , Spiral Note Book (Times - 18 Cm X 24 Cm) , Chamak Oxalic Acid , P.P. Clear Folder (L/Folder) , Paper Clips - Novex (26 Mm) , Paper Weight - Round Glass , Agni 4G Pen (Blue, Black, Red & Green) , Cello Pointec Pen , Parker Im Rollerball Pen , Flair Glass Gel Pen , Pen Stand - Good Quality , Apsara (Hb) Pencil , Kangaro Shp - 30 Punching Machine , Kangaro 480 – G Punching Machine , Camel Permanent Marker Pen , Nimyle 1 Ltr Phenyl , G.V.S. Plastic Bodkine (Forani) , Plastic Mug - Good Quality , Plastic Soft Cover Envelop File -Good Quality , Jk Copier Premium Ledger Paper (Fs - 90 Gsm) , Infinity Presentation Folder (A4) , Infinity Punchless Long Clip File (A4) , Infinity Punchless Long Clip File (Fs) , Infinity Push Pin , Push T Pin - Gem (Globe India) , Godrej Aer Room Freshener , Rubber Band (Guarder) - Tiger (Medium Size) , Camel Scale (30 Cm) , Casio Scientific Calculator , Kangaro Munix Scissors (Stainless Steel - Sl - 1160) , Coloured Self Adhesive Notes - Post-It Brand (3M India Ltd.) , Nataraj Sharpener , Neelgagansignature Pad (Pvc Pasted) , Camel Black Sketch Pen , Lifebuoy Soap (60 Gm) , Infinity (Inf - Sc513) Spring & Board Clip File (A4) , Infinity (Inf - Sc513f) Spring & Board Clip File (Fs) , Camel Stamp Pad (157 Mm X 96 Mm) , Camlin Stamp Pad Ink (100 Ml) , Kangaro Hs-45P Stapler Machine , Kangaro Mini – 10 Stapler Machine , Staples For Kangaro Hs-45P (24/6) , Staples For Kangaro 10 , Steno Note Book - Neelgagan (12.50 Cm X 19.00 Cm) , Synthetic Gum - Fevi Gum (Pidilite) (18 Ml) , Synthetic Resin Adhesive - Fevicol (Pidilite) , Tape Dispenser - Kangaro (Td- 18) , 24 Inch Toilet Brush (Both Side - Good Quality ) , Toilet Cleaner - Harpic (1000 Ml) , Cottontowel (160 Cm X 100 Cm) , Cottontowel (130 Cm X 70 Cm) , Cottontowel (90 Cm X 50 Cm) , Cottontowel (30 Cm X 30 Cm) , Umbrella (29 Inch X 8K) - K. C. Paul & Sons , Ajanta Wall Clock (Analog) , Ajanta Wall Clock (Digital) , Vim Washing Powder (500 Gm) , Gripex Water Sponge , Xerox Paper A3 - Jk Copier (75 Gsm) , Xerox Paper A4 - Jk Copier (75 Gsm) , Xerox Paper A4 - Replica (Pink) , Xerox Paper A4 - Replica (Yellow) , Xerox Paper Fs - Jk Copier (75 Gsm) , Cipla Hand Sanitizer (100 Ml) , Face Mask (Ear Loop Disposable 3 Ply) , Surgical Gloves (Disposable Latex Sterile) , Surface Disinfectant Spray - Savlon - 170 Ml , Clothes Disinfectant Spray - Savlon - 230 Ml

BRR:7634414 Bids Are Invited For Platform Swing - Rbsk (Q3) Total Quantity : 365

BRR:7634333 Bids Are Invited For Dosimetric Grade Cr-39 Detectors , Radiation Protective Lead Aprons With Accessories Radiation Survey Meter Total Quantity : 2500

BRR:7634311 Bids Are Invited For Chemical Engineering Equipment Analytical Weighing Balance , Di Water , Hot Plate Magnetic Stirrer With Sensor , Ph Meter , Water Bath With Multiple Holes , Chemical Refrigerator , Sonicator Bath , Descaling Chemical Total Quantity : 8

BRR:7634280 Bids Are Invited For Acoustic Trigger (At01) For Doppler Radar System Model-Drs 1, Make- Prototypa, As Per Afk Specificat , Signal Cable Connecting Fd01 M Or At01 To Sau-2U (Length 15 Meter) And Power Supply Cable Connecting Signal Cable Connecting Fd01 M Or At01 To Sau - 2U(Length 15Meter),And Power Supply Cable , Poly Carbonate Shield (Mha) (V2) Total Quantity : 2

BRR:7634175 Bids Are Invited For Conductivity Sensor, Spec: Tg60196 Rev: 08, Mat. Code- W96415203339 , Conductivity Transmitter, Spec: Tg60196 Rev: 08, Mat. Code- W96415206940 , Digital Conductivity Meter Total Quantity : 2

BRR:7634142 Bids Are Invited For Ph Tester , Conductivity Meter , Infrared Thermometer , Infrared Medical Thermometer For Measuring Body Total Quantity : 10

BRR:7634117 Bids Are Invited For Instrumentation Spares 1. Forbes Marshall Make Dhx 6 Cooler , 2. Forbes Marshall Make Dhx12 Cooler , 3. Forbes Marshall Make Ph Sensor , 4. Forbes Marshall Make Isolation Valve , 5. Forbes Marshall Make Rotameter , 6. Forbes Marshall Make Sample Filter , 7. Forbes Marshall Make Solenoid Valve , 8. Forbes Marshall Make Cooler Water Inlet Outlet Flexible Hoses Inlet Hose , 9. Forbes Marshall Make 4 Wire Conductivity Meter Aqua4trans Wall Mounted , 10. Forbes Marshall Make 4 Wire Ph Meter Aqua4trans Wall Mounted , 11. Forbes Marshall Make Dual Channel 4- Wire Conductivity Transmitter , 12. Forbes Marshall Make Ph Transmitter , 13. Forbes Marshall Make Electrode For Conductivity Measurement System - Fm 8311 Of Cell Constant K- 0.01 , 14. Forbes Marshall Make Ph Electrode For Ph Measurement System , 15. Forbes Marshall Make Electrode For Conductivity Measurement System - Fm 8311 Of Cell Constant K- 0.1 , 16. Forbes Marshall Make Electrode For Conductivity Measurement System - Fm 8311 Of Cell Constant K- 1 , 17. Forbes Marshall Make Conductivity Transmitter , Ph Meter Total Quantity : 41

BRR:7634094 Bids Are Invited For INTEGRATED SECURITY SURVEILLANCE SYSTEM SERVICE - To carry out the comprehensive installation of a surveillance camera system, including all required hardware and software components, along with their maintenance at various locations; Recording Devic.. Total Quantity :

BRR:7634064 Bids Are Invited For Hiring of Professionals for Application Development and Maintenance - Data Science and Analytics Role; AI/ML Expert; 3 years and Less than 6 years Total Quantity :

BRR:7634054 Bids Are Invited For Conductivity Sensor, Spec: Tg60196 Rev: 08, Mat. Code- W96415203339 , Conductivity Transmitter, Spec: Tg60196 Rev: 08, Mat. Code- W96415206940 , Digital Conductivity Meter Total Quantity : 2

BRR:7633971 Bids Are Invited For ATM Replenishment and Managed Services - Cash Dispenser(CD); Mobile ATM, Onsite; Rural, Semi-urban; AMC of Hardware/Software; Not Applicable; Not Applicable; Add Cash Method; Chhattisgarh Total Quantity :

BRR:7633925 Bids Are Invited For Calibration Services - Electrical; Resistance, Voltage, Current, Power (AC/DC), Insulation Monitor Device; NABL Labs; Lab , Calibration Services - Electrical, Mechanical; Density and Viscosity, Digital Inclinometer; NABL Labs; Lab , Calibration Services - Electrical; Temperature, Hygrometer, Specific heat & Humidity; NABL Labs; Lab , Calibration Services - Electrical; Voltage, Current, Power (AC/DC), Protection Meter; NABL Labs; Lab Total Quantity :

BRR:7633900 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) Total Quantity : 67

BRR:7633899 Bids Are Invited For Lighting Pole Or Post And Hardware - Tubular Street Light Poles (V2) (Q3) , Led Luminaire For Floodlight (V2) Conforming To Is 10322 (Part 5Section 5) (Q3) Total Quantity : 175

BRR:7633872 Bids Are Invited For Supply, Installation, Commissioning, And Testing Of Cgwa Complied Digital Water Flowmeter With Telem Supply, Installation, Commissioning, And Testing Of Cgwa , Turbidity Meter Total Quantity : 1

BRR:7633825 Bids Are Invited For Multiparameter Ph Or Mv Or Ise Or Temp Meter (Q3) Total Quantity : 2

BRR:7633753 Bids Are Invited For Vortex Flowmeter Nb15, Spec: Tg60665 Rev: 09, Material Code- W96415002767 , Vortex Flow Meter Total Quantity : 45

BRR:7633725 Bids Are Invited For Ladder Providing Access To Built In Gun , Platform Step Ladder Total Quantity : 6

BRR:7633641 Bids Are Invited For Subsea Cable Of 65 Meters For Dds , Laying And Termination Of Subsea Cable And Cleaning Of Dds 2 , Brass Glands For Pvc Cables Of Voltage Grade Up To And Including 3.3 Kv As Per Is:12943 Total Quantity : 2

BRR:7633618 Construction Of New Tank Lorry Decantation Shed ,Tt Checking Platform And Associated Facilities Including Work Of Dismantling Of Old Tank Lorry Decantation Shed Etc At Iocl Pune Afs Construction Of New Tank Lorry Decantation Shed, Tt Checking Platform And Associated Facilities Including Work Of Dismantling Of Old Tank Lorry Decantation Shed Etc At Iocl Pune Afs

BRR:7633613 Bids Are Invited For Internal Combustion Engine Crankcase Oils For Automotive Application (Diesel And Gasoline) As Per I Total Quantity : 1680

BRR:7633603 Bids Are Invited For Portable Hydrogen Purity Analyser_ Schedule _ , Hydrogen (H2) Detector (V1) Water Quality Meters / Analyzers Total Quantity : 1

BRR:7633539 Tender For Supplying Street Light Materials For Annual Maintenance In Mangalampettai Town Panchayat From 01-04-2024 To 31-03-2025; 1 40 Watts Tube light 2 40 Watts VPIT Copper choke 3 40 Watts Electronic Choke Industrial 4 40 Watts Starter 5 40 Watts - Side Holder 6 4’ 18 W Crystal Glass LED Tube Light 7 INCANDESCENT BULBS (15W/25W/40W/60W/100W) 8 Insulation Tape Roll 9 150 W Sodium Vapour Lamp bulb 10 150 W Sodium Vapour lamp choke 11 150 W Sodium Vapour Lamp Condenser 12 150 W Sodium Vapour Lamp Igniter 13 150 W Sodium Vapour Lamp holder 14 250 W Sodium Vapour Lamp bulb 15 250 W Sodium Vapour Lamp choke 16 250 W Sodium Vapour Condenser 17 250 W Sodium Vapour Lamp Igniter 18 250 W Sodium Vapour Lamp Holder 19 250W MH lamp 20 250W MH choke 21 250W MH igniter 22 250W MH condenser 23 400 W MH Lamp 24 400 W MH Choke 25 400 W MH Igniter 26 400 W MH Condenser 27 400 W MH Holder 28 1/18 VIR PVC insulated Copper Wire 29 3/20 VIR PVC insulated Copper Wire 30 7/16 VIR PVC insulated Copper Wire 31 7/20 VIR PVC insulated Copper Wire 32 Hook up wire (Patty Wire) 33 1/18 Aluminum Wire 34 3/20 Aluminum Wire 35 7/20 Aluminum Wire 36 7/20 GI Green Wire (Service Wire) 37 1.0 sq.mm. flex copper m/s wire 38 1.5 sq.mm. flex copper m/s wire 39 2.5 sq.mm. flex copper m/s wire 40 4.0 sq.mm. flex copper m/s wire 41 2.5 sq.mm. 3 core flat cable heavy 42 4.0 sq.mm. 3 core flat cable heavy 43 4.0 sq.mm. 4 core flat copper power cable 44 4 core 6 sq.mm. PVC Armoured Aluminum UG Cable 45 4 core 10 sq.mm. PVC Armoured Aluminum UG Cable 46 4 core 16 sq.mm. PVC Armoured Aluminum UG Cable 47 16 amps Fuse Unit 48 32 amps Fuse Unit 49 63 amps Fuse Unit 50 100 amps Fuse Unit 51 200 amps Fuse Unit 52 500 amps Fuse Unit 53 DB Switch 54 16 amps Main Switch 55 32 amps Main Switch 56 63 amps Main switch 57 100 amps Main switch 58 6 amps to 32 amps 1P MCB 59 40amps1P MCB 60 16 amps 2P MCB 61 32amps 2P MCB 62 32amps 4P MCB 63 63 amps 3P MCB 64 63 amps 4P MCB 65 100 amps 4P MCB 66 3/4”G.I bended pipe for 40W Tube fitting 67 1”G.I bended pipe for 40W Tube fitting 68 1 ¼” G.I bended pipe for 40W /150W / 250W Sodium Vapour lamp fitting 69 40W TL Fitting clamp set 70 Tube fitting screw 71 E.B RCC Pole Clamp set with bolts & Nuts 72 BI- Metallic Clamp 3/20 73 BI – Metallic Clamp 7/20 74 Choke Screw 75 EB Service G.I Box (1 ½ x 1 metal box) 76 2 ½ x 2 ½ metal box 77 G.I Switch Box 78 Wooden plank for Meter Board 79 Wooden plank for Ariel Board 80 1” PVC Wiring Pipe 81 1” PVC Wiring Bend 82 11 W CFL bulb 83 11 W CFL choke 84 18 W CFL lamp 85 18 W CFL Electronic choke 86 25W CFL Lamp 87 35 W Spiral CFL Lamp 88 45 W CFL Lamp 89 65 W CFL lamp 90 85W CFL Lamp 91 45 watts, 65 watts, 85 watts CFL holder 92 36 W CFL 4 Pin Lamp 93 36W Electronic Ballast 94 36 W CFL 4 Pin Holder 95 18 W LEDBULB 96 23 W LED BULB 97 30 W LED BULB 98 40 W LED BULB 99 Pendent Holder 100 Aluminum Shade Heavy ( Round) 101 200A Fuse Wire 102 500A Fuse Wire 103 1 x 36 W CFL fittings with complete set 104 2 x 36 W CFL fittings with complete 105 2 x 36 W CFLHolder 106 2 x 36 W CFL Lamp 107 4 x 36 W CFL fittings with complete set 108 45 watts CFL power saver street light fittings 109 4 x 55 CFL Fitting with Complete Set 110 65 watts CFL power saver street light fittings 111 85 watts CFL power saver street light fittings 112 1*40W Street Light Aluminum Fitting without chokes, Bulb & Starter 113 1*40W Street light Aluminium fitting set with bulb, choke, Starter - accessories set 114 1*40W Watts Electronic fittings 115 1*40 W street light acrelic cover 116 1*40 W Side Holder base 117 70 W SV Light fittings set with choke, igniter, condenser etc without bulb 118 150 W Metal Halide fitting set with choke, igniter, condenser, lamp complete set 119 250 Watts Sodium Vapour fitting set with choke igniter, condenser, complete without lamp 1 set. 120 250W / 70W SV Lamp Cover 121 5000 W Street Light Automatic on/off switch ISO: 9000 – 1 Set. 122 LED fittings Accessories 123 20 W LED Fitting with Complete Set 124 24 W LED Fitting with Complete Set 125 30 W LED Fitting with Complete Set 126 36 W LED Fitting with Complete set 127 45 W LED Fitting With Complete set 128 50 w LED Fittings with complete set 129 70 W LED street light fitting complete set 130 150 W LED street light fitting complete set 131 200 W LED Street Light Fitting complete set 132 Gong Bell 12 size suitable for 250V 133 48 Ceiling Fan Crompton High Speed (without Regulator) 134 Fan Step Regulator 100W 135 5 Amps Switch 136 5 Amps 3 Pin & 2 PinWall Socket 137 20 W LED 4 feet Glass Tube Light 138 24W LED 4 feet Tube Light Fittings 139 28W LED 4 feet Tube Light Fittings 140 36W LED 4 feet Tube Light Fittings 141 Street Light Aluminium Fitting with Chocks, Bulb & Starter 142 70W Sodium Vapour Lamp 143 70W Sodium Vapour Lamp Choke 144 70W Sodium Vapour Lamp Holder 145 70W Sodium Vapour Lamp Igniter 146 70W Sodium Vapour Lamp Condenser 147 70 W SV Light fittings set with choke, igniter, condenser Including 148 72 W LED Street Light fitting 149 80 W LED Street Light fitting 150 100 W LED Street Light fitting 151 50W Flood Light 152 100W Flood Light 153 150W Flood Light 154 2000W Flood Light 155 300W Flood Light 156 400W Flood Light 157 250 W Street Light Accessories 158 1*40 W street light fitting Cover 159 125 W Mercury Lamp 160 125 W Mercury Lamp Chock 161 125 W Mercury Lamp Condencer 162 125 W Mercury Holder 163 125W MH choke 164 125W MH igniter 165 125 W MH condenser

BRR:7633501 Supply Of 11 Kv 30 Kn Straindisc Hardware Suitable For Rabbit And Weasel Conductor Supply Of 11 Kv 30 Kn Straindisc Hardware Suitable For Rabbit And Weasel Conductor , Supply Of 11 Kv 30 Kn Strain Disc Hardware Suitable For Rabbit And Weasel Conductor , Supply Of 11 Kv 30 Kn Strain Disc Hardware Suitable For Rabbit And Weasel Conductor

BRR:7633476 Bids Are Invited For Automatic Gate Barrier - 6 Meters,Automatic Gate Barrier - 4 Meters Total Quantity : 18

BRR:7633440 Bids Are invited for Resin Cast Spout Assembly Cg8060 , Spout Fitting With Connector Cg8061 , Front Insulator Connector R Phase Cg2421 , Front Insulator Connector Y Phase Cg2422 , Front Insulator Connector B Phase Cg2423 , Rear Insulator Connector R Phase Cg2821 , Rear Insulator Connector Y Phase Cg2822 , Rear Insulator Connector B Phase Cg2823 , Instrument Control Box Consisting Of Indication Lamp Selector Switch And Analogue Meters Cg2070 , Vertical Isolating Vcb Trolley Complete With All Accessories Including Operating Mechanism Cgv008 , Earth Leakage Relay With Cbct Cg0172 , Power Converter 110V Ac To 110V Dc Cg4949 Total Quantity : 25

BRR:7633394 Jjm Scheme In Kathalia Rd Block Under Sepahijala District/ Construction Of Cement Concrete Platform , G.I. Post Including Necessary Fittings Attached To Swtp Srimantapur

BRR:7633388 Maintenance Of Ci/Di/Pvc Pipe Line In/C Construction Of Sluice Valve Chamber, Hydrant Post Platform Etc. Complete At Different Existing Dtw Schemes Of Manu R.D Block Under Dws Sub-Division Manu(Gr-I)

BRR:7633315 Bids Are Invited For Desktop And Application Virtualisation Software (Q3) ((3 3 )) 1 Lakh (S) Total Quantity : 38

BRR:7633169 Bids Are Invited For 1200550E 1 Year (S) Full Body Tinkering And Denting Work , Full Body Painting Work , Underbody Coating , Front Bumper Change , Rear , Utility Vehicle Total Quantity : 10

BRR:7633163 Bids Are Invited For Platform Truck As Per Is 10311 (Latest) (Q3) Mse Total Quantity : 1

BRR:7633127 Bids Are Invited For Access Control System Access Control System_Item 1 , Access Control System_Item 2 , Access Control System_Item 3 , Access Control System_Item 4 , Access Control System_Item 5 , Access Control System_Item 6 , Access Control System_Item 7 , Access Control System_Item 8 , Access Control System_Item 9 , Access Control System_Item 10 , Access Control System_Item 11 Matrix Make Fingerprint And Rf Card Based Time- Attendance And Access Control Solutions, Supply Of Cat 6 Utp Cable (Per Running Meter), Supply Of 3 Core 1.5Mm , Embedded Linux Based Biometric Attendance System (V3) Total Quantity : 32

BRR:7633099 Bids Are Invited For Lpmt2 Mse Combi Switch , Solenoid Operated Valve , Solenoid Switch , S A Wiper Arm And Blade , Brkt Assy Wiper Spin , Fuse Fifteen , Utility Vehicle Total Quantity : 274

BRR:7633098 Bids Are Invited For Clamp Hose Hose For Radiator Pipe , Air Compressor , Field Coil Assy , Pinion With Bearing Steel , Rubber Stopper Front , Rubber Stopper Rear , Rpm Meter , Clutch Assy Fan , Clutch Release Bearing , Disc Clutch , Fly Wheel Engine , Pump Assy Water , Gasket Cylinder Head , Button Horn , Arm Assy Kick Starter , Pipe Intake S A Of Fuel Hose 500 Long , , E - Tourist Vehicle Passenger (V3) Total Quantity : 33

BRR:7633097 Bids Are Invited For Lpmt1 Mse Front Brake Chamber Assy , Oil Seal For Crank Shaft Rear , Radiator Cap Assy , Ball Bearing , Ring Set , Gasket Exhaust Manifold , Plate Shackle Inner , Horn Assy High , Bearing , Utility Vehicle Total Quantity : 49

BRR:7633051 Bids Are invited for Desktop Pc , Workstation , Projector Ultra Short Throw , Projector Short Throw , Motorised Screen8by 6 - Motorised Screen 8 By 6 , Motorised Screen 12By 7 - Motorised Screen 12 By 7 , Interactive Touch Panel Led 98 Inchs , Ups 10 Kva , Splitter , Nas 10Tb 2Way , Layer 2 Switch 24 Port With Poe 120Km Sfp Modules , Layer 2 Optical Switch 24 Port With Opticals , Ote 1G 80Km , Hdmi Cable 25 Meter , Quadrop , Hd Camera 12X , Led 75 Inch , Utp Cable Outdoor , Optimux Sfp Module 10Km , Ofc 4 Core Cable Total Quantity : 15716

BRR:7632894 Supply Installation, Testing And Commissioning Of Different Dia Bulk Flow Meter At Different Locations Inside Kantabaji Town

BRR:7632878 Bids Are Invited For Custom Bid for Services - Calibration of Doble Make automatic relay test kit , Model No F6150, Sl No 021003779 of CRITM Division through GeM Calibration Services Selection of Laboratories for Testing of Products/Material Hiring of Boats Testing of Water Quality Refilling of Industrial Gases in Cylinders Leasing in of Commercial Properties Hiring of Third-Party Inspection Agency Hiring of Professionals for Application Development and Maintenance Total Quantity :

BRR:7632871 Bids Are Invited For AMC of Integrated Security and Surveillance System - Remote Video Monitoring; Comprehensive; Hardware, Software, Networking System, License; Consumables to be provided by Service Provider (included in the contract cost); Defence Establishments; Contr.. Total Quantity :