Indian Tenders

Tender Notice
TDR 55934613
Tendering Authority Bharat Heavy Electricals Limited
Tender No 2026Q2STEELPLTSHT
Tender ID 2026_BHEL_62155_1
Tender Brief Tender For Steel Rate Contract - Qtr Ii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils
City AS PER NIT
State Uttar Pradesh
Document Fees Refer document
EMD Refer document
Tender Value Refer document
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Steel Rate Contract - Qtr Ii 2026 - 27- Requirement Of Steel Plates, Sheets & Coils , Cr Coil 0.63X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.63 X 850 X Coil Form [T X W X L] [Mm] , Cr Coil 0.63 X 450 Is 513 Dd; Tdc:Rta:408:R04; 0.63 X 450 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X850 Is 513 Cr3 Dd Pos Tol Tdc:Rta:410:R00; 0.8 X 850 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X850 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.8 X 850 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X750 Is 513 Cr3 Dd Pos Tol Tdc:Rta:410:R00; 0.8 X 750 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X300 Is 513Cr3 Dd Pos Tol Tdc:Rta:410:R00; 0.8 X 300 X Coil Form [T X W X L] [Mm] , Cr Coil 0.80X300 Is 513 Cr3 Dd Tdc:Rta:408:R04; 0.8 X 300 X Coil Form [T X W X L] [Mm] , Cold Rolled Coil 1.25 X 903 Is 513 Gr.Cr3; 1.25 X 903 X Coil Form [T X W X L] [Mm] , Cr Sheet 1.6 Mm Is 513 Cr2 - Kld; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , 1.6 Mm X 1250 Mm X 2500 Mm Crc Steel Sheets Annealed To Specification Aa 10115 Rev-09 (Is 513 Cr2 Kld); 1.6 X W=1250 X L=2500 [T X W X L] [Mm] , Hr Sheets 1.6 Mm Is 1079 Gr.Hr2 Sk/K; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 2 Mm Is 5986 Gr 205; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Cr Sheet 2.0 Mm Is 513 Cr2 - Kld; 2 X 1250 X 2500 [T X W X L] [Mm] , Hr Sheets 2 Mm Is 1079 Gr.Hr1 Sk/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 2 Mm Is 1079 Gr.Hr2 Sk/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 2.5 Mm Is 5986 Gr 205; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 2.5 Mm Is 1079 Gr.Hr2 Sk/K; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , 3.0 Mm X 1250 Mm X 2500 Mm Crc Steel Sheets Annealed To Specification Aa 10115 Rev-09 (Is 513 Cr2 Kld); 3 X W=1250 X L=2500 [T X W X L] [Mm] , Hr Sheet 3.15 Mm Is 5986 Gr 205; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr1 Sk/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheets 3.15 Mm Is 1079 Gr.Hr2 Sk/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Hr Sheet 4.0Mm Is 5986 Gr 205; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K; Tdc:301 ; 5 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 5 (T) X 2000 (W) X (6300-12000) (L); 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 5 Mm Is2062 E250 Gr Br/K Tdc:386; 5 (T) X 1500 ≤ W ≤ 1800 (W) X (6300-12000) (L) [Mm]; 5 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is 2062 E 250 Gr A/Br/Sk/K; 6 X W ≤ 1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E350 Gr Br/K Tdc:301; 6 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E350 Gr B0/K Tdc:386; 6 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 6 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Cq Pl 6 Mm Is 3502; 6 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 6 (T) X 2000 (W) X (6300-12000) (L) Mm; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 6 Mm Is2062 E250 Gr Br/K Tdc:386 Rev 03; 6 (T) X 2500 (W) X (6300-12000) (L) Mm; 6 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E250br/K Tdc:6:386, Width 2000Mm, Length 12000Mm; 8 X 2000 X 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 8 X 2900 X 10000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E350 Gr B0/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Cq Pl 8 Mm Is 3502; 8 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:301; 8 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc 301; 8 (T) X 2600 (W) X 10000 (L) [Mm]; 8 X 2600 X 10000 [T X W X L] [Mm] , Pl 8 Mm Is2062 E250 Gr Br/K Tdc:386; 8 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 8 Mm Is 2062 E250br/K Tdc:6:386,; 8 X 2500 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 10 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 10 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/Sk/K Tdc 301 + Ust As Per Astm A578 Level B, Width 2500 Mm, Length 10000 Mm; 10 X W = 2500 X L = 10000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc 301 , Width 2000Mm, Length 12000 Mm; 10 X 2000 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc:6:386, Width 2000Mm, Length 12000Mm; 10 X 2000 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 10000Mm; 10 X 2500 X 10000 [T X W X L] [Mm] , Pi 10 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 10Mm Is2062 E350b0 Tdc:6:386 Rev 03; 10 X 2500 X 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr B0/K Tdc:386; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:301; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E350 Gr Br/K Tdc:301; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is2062 E250 Gr Br/K Tdc:386; 10 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 10 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 6000-8000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 10 X 2500 X 6000 ≤ L ≤ 8000 [T X W X L] [Mm] , Pl 10 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 10 X 2500 X 6500 [T X W X L] [Mm]; 10 X 2500 X 6500 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 12 X W= 2500 X 1000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr Br/K Tdc:301; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;12 Mm 2500 Mm 10000 Mm : T X W X L (Mm); 12 X 2500 X 10000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 12 X 2500 X 12000 [T X W X L] [Mm] , Pi 12 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E250 Gr Br/K Tdc:301; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12 Mm Is2062 E350 Gr B0/K Tdc:386; 12 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 12Mm A516 Gr. 70; Tdc: Aa10403 Rev 01 + Supplementry Rquirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure- 1)+Bend Test (Sl. No. 5 Of Annexure-1) .; 12 X 3000 X 8000 L 12000 [T X W X L] [Mm] , Pl 12 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 12 X 2500 X 6300 [T X W X L] [Mm] , Pl 12.7 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [Mm] , Pl 14 Mm Is2062 E250 Gr Br/K Tdc:386; 14 (T) X 2500 (W) X (6300-12000) (L) [M]; 14 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 14 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 14 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 14 X 2500 X 6500 [T X W X L] [Mm] , Plt Bq 14 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) +Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 14 X 2000 X 8000 [T X W X L] [Mm]; 14 X 2000 X 8000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12; 16 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr B0/K Tdc:301; 16 (T) X 2000 (W) X (6300-12000) (L) [Mm]; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr B0/K Tdc:301; 16 (T) X 2500 (W) X (6300-12000) (L); 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;16 Mm 2500 Mm 8000 Mm : T X W X L (Mm); 16 X 2500 X 8000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 16 X 2500 X 12000 [T X W X L] [Mm] , Pi 16 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 16 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 16 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:301; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr Br/K Tdc:301; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 (T) X 2500 (W) X (6300-12000) (L) Mm; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm Is2062 E350 Gr B0/K Tdc:386; 16 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70- Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 16 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [Mm] , Pl 16 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 16 X 2500 X 5700 [T X W X L] [Mm]; 16 X 2500 X 5700 [T X W X L] [Mm] , Pl 16Mm A516 Gr. 70; Tdc: Aa10403 Rev 01 + Supplementry Rquirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1)+Bend Test (Sl. No. 5 Of Annexure-1) .; 16 X 3000 X 10000 L 12000 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2000 X 10000 [T X W X L] [Mm; 16 X 2000 X 10000 [T X W X L] [Mm] , Plt Bq 16 Mm (Sa516 Gr 70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 16 X 2500 X (6300 ≤ L ≤ 10000) [T X W X L] [Mm]; 16 X 2500 X 6300 ≤ L ≤ 10000 [T X W X L] [Mm] , Plate 18.0 Mm; Is2062e350 Gr B0; Tdc:6:386:Rev:03: 18 X 2500 X (10000-12000) (T X W X L) Mm; 18 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 18Mm Is2062 E250 Gr B0/K Tdc:386; 18 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 18 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 18 Mm Is2062 E350 Gr Br/K Tdc:301; 18 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 18 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr Br/K Tdc:386; 20 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 20 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 20 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 20 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 + Ust As Per Astm A435, Width 2500 Mm, Length 12500 Mm; 20 X W= 2500 X L = 12500 [T X W X L] [Mm] , Pi 20 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 20 X W= 2500 X L = 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;20 Mm 2500 Mm 10500 Mm : T X W X L (Mm); 20 X 2500 X 10500 [T X W X L] [Mm] , Plate 20.0 Mm; Is2062e350 Gr B0; Tdc:6:386:Rev:03: 20 X 2500 X (10000-12000) (T X W X L) Mm; 20 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 20 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 20 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr. Br Tdc 301; 20 (T) X 2500 (W) X 11375 (L) [Mm]; 20 X 2500 X 11375 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr. Br Tdc 301; 20 (T) X 2500 (W) X 8230 (L) [Mm]; 20 X 2500 X 8230 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 16 (T) X 2500 (W) X (6300-12000) (L) Mm; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 20 X 2500 X 7100 [T X W X L] [Mm]; 20 X 2500 X 7100 [T X W X L] [Mm] , Pl 20 Mm Is2062 E350 Gr B0/K Tdc:386; 20 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 20 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 6000-8000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 20 X 2500 X 6000 ≤ L ≤ 8000 [T X W X L] [Mm] , Pl 20 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 20 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 20 X 2500 X 6500 [T X W X L] [Mm] , Plate 20 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 20 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl Bq 20 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 20 X 2500 X 12000 [T X W X L] [Mm]; No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 20 X 2500 X 12000 [T X W X L] [Mm] , Pl 22 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B; 22 (T) X 2500 (W) X 6000 (L) [Mm]; 22 X 2500 X 6000 [T X W X L] [Mm] , Pl 22 Mm Is2062 E350 Gr.B0 Tdc 386; 22 X 2500 X 12000 [T X W X L] [Mm] , Plate 22 Mm; Is2062 E250grbr; Tdc:6:386:Rev:03: 22 X 2500 X (10000-12000) (T X W X L) Mm; 22 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 22 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 22 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Plt Bq 22 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 22 X 2500 X 13500 [T X W X L ] [Mm]; 22 X 2500 X 13500 [T X W X L] [Mm] , Plt Bq 22 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403)+Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403)+Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403); 22 X 3000 X 10600 [T X W X L] [Mm]; 22 X 3000 X 10600 [T X W X L] [Mm] , Pl 25 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 25 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12; 25 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435; 25 X W = 3200 X L = 7000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435; 25 X 2500 X 8000 L 12500 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr Br/K Tdc:301; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.; 25 (T) X 2800 (W) X 8500 (L) [Mm]; 25 X 2800 X 8500 [T X W X L] [Mm] , Pi 25 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 25 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 25 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 25 X 2500 X L= 6300 [T X W X L] [Mm] , Pl.25 X 2500 X 12000 Is 2062 E250 Gr. Br. Tdc 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 25 (T) X 2500 (W) X (6300-12000) (L) Mm; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is2062 E350 Gr B0/K Tdc:386; 25 (T) X 2500 (W) X (6300-12000) (L) [Mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 25 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 3100 ; L= 6700;[Thickness, Length (L) & Width (W) Are In Mm]; 25 X 3100 X 6700 [T X W X L] [Mm] , Plate 25 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 25 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Plt Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 25 X 3000 X 13500 [T X W X L] [Mm]; No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 25 X 3000 X 13500 [T X W X L] [Mm] , Pl Bq 25 Mm (Sa516 Gr70) Tdc: Aa10403 +Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 25 X 2500 X 10000 [T X W X L] [Mm]; No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 25 X 2500 X 10000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 28 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 28 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 28 X W= 2500 X L= 12000 [T X W X L] [Mm] , Plt Bq 28 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 28 X 2500 X 13000 [T X W X L] [Mm]; No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr..; 28 X 2500 X 13000 [T X W X L] [Mm] , Pl 30 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435; 30 X 2500 X 8000 L 12500 [T X W X L] [Mm] , Pl 30 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.; 30 (T) X 2500 (W) X 6000 (L) [Mm]; 30 X 2500 X 6000 [T X W X L] [Mm] , Pi 30 Mm Is2062 E250 Gr Br Tdc:6:386 Rev 03; 30 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 30 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 30 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 30 Mm Is 2002 Grade-2; Tdc: Aa10401; W = 2500 ; L= 8000; [Thickness, Length (L) & Width (W) Are In Mm]; 30 X 2500 X 8000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 32 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 32 Mm Is 2062 E 250 Gr A/Br/Sk/K Tdc:301 Rev 12; 32 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate-32 Is2062 E250br Tdc:301 Rev 12; 32 X 2500 X 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc 301 Rev 12 + Ust As Per Astm A435,Width 2500 Mm, Length 12500 Mm; 32 X W = 2500 X L = 12500 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B; 32 (T) X 2500 (W) X 7500 (L) [Mm]; 32 X 2500 X 7500 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 32 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr Br/K ;Tdc 301 Rev 12; (Impact Test At Room Temperature Is Mandatory); Ut As Per Astm A435: 32 X 2500 X 6300 ; T (Mm) X W (Mm) X L (Mm); 32 X 2500 X L= 6300 [T X W X L] [Mm] , Pl 32 Mm Is2062 E250 Gr. Br/K Tdc 301; 32 (T) X 2500 (W) X 7500 (L) [Mm]; 32 X 2500 X 7500 [T X W X L] [Mm] , Pl 32 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 32 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [Mm] , Pl 32 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 32 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 32 X 2500 X 6500 [T X W X L] [Mm] , Pl 32 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 32 X 2500 X 6300 ≤ L ≤ 10500 [T X W X L] [Mm] , Pl Bq 32Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test (Sl. No. 5 Of Annexure-1 Of Aa10403) + Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 32 X 2500 X 10000 [T X W X L] [Mm]; No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 32 X 2500 X 10000 [T X W X L] [Mm] , Pi 34 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 34 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 34 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 34 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 34 Mm; Is2062 E250grbr; Tdc::301:Rev:12: 34 X 2500 X (10000-12000) (T X W X L) Mm; 34 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 35 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;35 Mm 1500 Mm 8000 Mm : T X W X L (Mm); 35 X 1500 X 8000 [T X W X L] [Mm] , Plate 35 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 35 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 36 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435, Width 2500Mm, Length 12500Mm; 36 X W=2500 X L =12500 [T X W X L] [Mm] , Pi 36 Mm Is2062 E350 Gr Br/K Tdc 301 Rev 12; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [Mm] , Pl 36 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 36 X W= 2500 X L= 12000 [T X W X L] [Mm] , Pl 36 Mm Is2062 E250 Gr. Br/K Tdc 301; 36 (T) X 2500 (W) X 9000 (L) [Mm]; 36 X 2500 X 9000 [T X W X L] [Mm] , Pl 36 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 3100 ; L= 6700 ;[Thickness, Length (L) & Width (W) Are In Mm]; 36 X 3100 X 6700 [T X W X L] [Mm] , Pl 36 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 36 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [Mm] , Plate 38 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 38 X 2500 X (10000-12000) (T X W X L) Mm; 38 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435, Width 2500Mm, Length 12000Mm; 40 X W=2500 X L =12000 [T X W X L] [Mm] , Pi 40 Mm Is2062 E350 Gr Br Tdc 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [Mm] , Pl 40 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 40 X 2500 X 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 40 X W= 2500 X L= 12000 [T X W X L] [Mm] , Plate 40.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 40 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 40 Mm; Is2062 E250grbr; Tdc:6:386:Rev:03: 40 X 2500 X (10000-12000) (T X W X L) Mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 40 Mm Is2062 E350 Gr Br/K Tdc 301 + Ust As Per Astm A435; 40 (T) X 2500 (W) X 12000 (L) [Mm]; 40 X 2500 X 12000 [T X W X L] [Mm] , Pl 40 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 40 X 2500 X 6000 L 12000 [T X W X L] [Mm] , Plate 40 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 40 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 40 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 Of Annexure-1) + Bend Test( Sl. No. 5 Of Annexure-1); 40 X 2500 X 8400 [T X W X L] [Mm] , Plt Bq 40 Mm (Sa516 Gr70) Tdc: Aa10403 + Ibr (Sl.No. 3.6.1 Of Aa10403) + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Bend Test( Sl. No. 5 Of Annexure-1 Of Aa10403)+ Simulation Heat Treatment (S5 + Sl.No.8 Of Annexure 1 Of Aa10403); 40 X 2500 X 9000 [T X W X L] [Mm]; No. Of Cycles Required In Sht: 01 Cycle For 3 Hrs Or 3 Cycles For 1 Hr.; 40 X 2500 X 9000 [T X W X L] [Mm] , Pl 42 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.; 42 (T) X 2500 (W) X 6000 (L) [Mm]; 42 X 2500 X 6000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br.K Tdc 301 Rev 12;45 X 2500 X 6300-12000; ( T X W X L) Mm; 45 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 45 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 45 X 2500 X 12000 [T X W X L] [Mm] , Pl 45 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 45 X 2500 X 12000 [T X W X L] [Mm] , Plate 45.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 45 X 2500 X (10000-12000) (T X W X L) Mm; 45 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 45 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 45 X 2500 X (10000-12000) (T X W X L) Mm; 45 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 45 Mm Is2062 E350 Gr B0; Tdc:386; 45 (T) X 2000 (W) X (10000-12000) (L) [Mm]; 45 X 2000 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 45.0 Mm - A515gr70 + Ibr Requirement; 45 X 1000-2500 X 5000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 50 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.; 50 (T) X 2500 (W) X 6000 (L) [Mm]; 50 X 2500 X 6000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 50 Mm Is 2062 E250br/K Tdc:6:386, Width 2500Mm, Length 12000Mm; 50 X 2500 X 12000 [T X W X L] [Mm] , Pi 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [Mm] , Plate 50.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 50 X 2500 X (10000-12000) (T X W X L) Mm; 50 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Plate 50 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 50 X 2500 X (10000-12000) (T X W X L) Mm; 50 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 50 Mm Is2062 E350 Gr B0; Tdc:386; 50 (T) X 2000 (W) X (10000-12000) (L) [Mm]; 50 X 2000 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 50 Mm (Sa 516 Gr 70) Tdc : Aa10403; 50 X 1820 X 10750 [T X W X L] [Mm]; 50 X 1820 X 10750 [T X W X L] [Mm] , Pl 50 Mm (Sa 516 Gr 70) Tdc : Aa10403; 50 X 2600 X 10000 [T X W X L] [Mm]; 50 X 2600 X 10000 [T X W X L] [Mm] , Pl 55 Mm Is2062 E350 Gr.B0 Tdc 386; 55 X 2500 X 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 56 Mm Is2062 E250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 56 X W=2500 X L =8000 [T X W X L] [Mm] , Plate-56 Is2062 E250br Tdc:301 Rev 12; 56 X 2500 X 12000 [T X W X L] [Mm] , Pi 56 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 56 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 56 X 2500 X 12000 [T X W X L] [Mm] , Plate 56 Mm; Is2062 E350gr Br; Tdc::301:Rev:12: 56 X 2500 X (10000-12000) (T X W X L) Mm; 56 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 60 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 60 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 63 X W=2500 X L =8000 [T X W X L] [Mm] , Pi 63 Mm Is2062 E350 Gr Br/K Tdc 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;63 Mm 2500 Mm 9500 Mm : T X W X L (Mm); 63 X 2500 X 9500 [T X W X L] [Mm] , Pl 63 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 63 Mm Is2062 E350 Gr B0 Tdc:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is 2062 E350b0 Tdc:6:386, Width 2500Mm, Length 12000Mm; 63 X 2500 X 12000 [T X W X L] [Mm] , Pl 63 Is 2062 E250gr-Br/K Tdc:301, 63 X 2150 X 12000 [T X W X L] [Mm]; 63 X 2150 X 12000 [T X W X L] [Mm] , Pl 63 Is 2062 E250gr-Br/K, Tdc:301, 63 X 1875 X 9000 [T X W X L] [Mm]; 63 X 1875 X 9000 [T X W X L] [Mm] , Plate 63.0 Mm; Is2062e250 Gr Br.; Tdc:6:386:Rev:03: 63 X 2500 X (10000-12000) (T X W X L) Mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 63 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) Are In Mm]; 63 X 3600 X 7800 [T X W X L] [Mm] , Pl 63 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 63 Mm X 2500 Mm X 6500 Mm : T X W X L (Mm); 63 X 2500 X 6500 [T X W X L] [Mm] , Pl 63 Mm (Sa 516 Gr 70) Tdc : Aa10403; 63 X 1800 X 12000 [T X W X L] [Mm]; 63 X 1800 X 12000 [T X W X L] [Mm] , Pl 70 Mm Is 2062 E 250 Gr A/Br/Sk/K; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 70 Mm Is 2062 E 250 Gr Br/K Tdc 301, Width 2500Mm, Length 8000Mm; 70 X W=2500 X L =8000 [T X W X L] [Mm] , Pl 70 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;70 Mm 2000 Mm 8500 Mm : T X W X L (Mm); 70 X 2000 X 8500 [T X W X L] [Mm] , Pl 70 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 70 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) Are In Mm]; 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Plate 70 Mm ; Tdc: Aa10404-05 + Supplementary Requirements: Ut (S12); 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [Mm] , Pl 70 Mm (Sa 516 Gr 70) Tdc : Aa10403; 70 X 1820 X 10750 [T X W X L] [Mm]; 70 X 1820 X 10750 [T X W X L] [Mm] , Pl 70 Mm (Sa 516 Gr 70) Tdc : Aa10403; 70 X 2600 X 10000 [T X W X L] [Mm]; 70 X 2600 X 10000 [T X W X L] [Mm] , Plate 75.0 Mm; Is2062e350grb0; Tdc:6:386:Rev:03: 75 X 2500 X (10000-12000) (T X W X L) Mm; 75 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 80 Mm Is 2062 E 250 Gr A/Br/Sk/K; 80 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 80 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12; 80 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B.;80 Mm 2500 Mm 7000 Mm : T X W X L (Mm; 80 X 2500 X 7000 [T X W X L] [Mm] , Pl 80 Is 2062 E250gr-Br/K, Tdc:301, 80 X 2500 X 7650 [T X W X L] [Mm]; 80 X 2500 X 7650 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc 301 + Ust As Per Astm A435; 80 (T) X 2500 (W) X 10000 (L) [Mm]; 80 X 2500 X 10000 [T X W X L] [Mm] , Pl 80 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 80 X 2850 X 10700 [T X W X L] [Mm]; 80 X 2850 X 10700 [T X W X L] [Mm] , Pl 80 Mm A516 Gr.70; Tdc: Aa10403 + Impact Test (S5 + Sl.No. 3 Of Annexure 1 Of Aa10403) + Ibr (Sl.No. 6 Of Annexure 1 Of Aa10403); 80 X 2500 X 6300 [T X W X L] [Mm] , Pl 90 Mm Is 2062 E 250 Gr A/Br/Sk/K; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 90 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B; 90 (T) X 2500 (W) X 10000 (L) [Mm]; 90 X 2500 X 10000 [T X W X L] [Mm] , Pl 90 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 100 Mm Is 2062 E250 Gr Br; 100 X 2500 X 6000 L 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;100 Mm 2500 Mm 12000 Mm : T X W X L (Mm); 100 X 2500 X 12000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E350 Gr C; Tdc:301 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Bend Test + Ut: Astm A 578 Level B + Through Thickness Tension Testing To Quality Class Z25 (As Per En10164); 100 (T) X 2500 (W) X 11000 (L) [Mm]; 100 X 2500 X 11000 [T X W X L] [Mm] , Pi 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X W= 4400 X L= 4600 [T X W X L] [Mm] , Pl 100 Mm Is2062 E250 Gr Br/K Tdc:6:386 Rev 03; 100 X 2500 X 6000 [T X W X L] [Mm]; 100 X 2500 X 6000 [T X W X L] [Mm] , Pl 100 Mm Is2062 E250 Gr Br/K; Tdc:386; 100 (T) X 3500 (W) X 7000 (L) [Mm]; 100 X 3500 X 7000 [T X W X L] [Mm] , Pl 100 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) Are In Mm]; 100 X 2200 X 4800 [T X W X L] [Mm] , Pl 100 Mm Is 2002 Grade-2; Tdc: Aa10401; 100 (T) X 4000 (W) X 4000 (L) [Mm]; 100 X 4000 X 4000 [T X W X L] [Mm] , Pl 100 Mm Sa515 Grade-70 Aa10404-05 + Supplementary Requirements: Impact Test At Room Temperature+Orientation Of The Test Specimen In Longitudinal Direction(S5); 100 X 2200 X 4800 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 250 Gr A/Br/Sk/K; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 110 Mm Is2062 E250 Gr A/Br/Sk/K Tdc 301 Rev 12;110 X 2500 X 6300-12000; ( T X W X L) Mm; 110 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 110 Mm Is 2062 E 350 Gr B0 Tdc:6:386 Rev 03; 110 X 2000≤ W ≤ 2500 X 6000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 110 Mm Is2062 E250 Gr Br./K Tdc:386; 110 (T) X 2500 (W) X 10000 (L) [Mm]; 110 X 2500 X 10000 [T X W X L] [Mm] , Pl 110 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 1100 ; L= 12000;[Thickness, Length (L) & Width (W) Are In Mm]; 110 X 1100 X 12000 [T X W X L] [Mm] , Pl 110 Mm A516 Grade-70; Tdc : Aa10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 Of Annexure-1); 110 X 2000≤ W ≤2500 X 6000 ≤ L ≤ 8000 [T X W X L] [Mm] , Pl 115 Mm Is 2062 E 250 Gr A/Br/Sk/K; 115 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 120 Mm Is 2062 E 250 Gr A/Br/Sk/K; 120 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 120 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;120 Mm 2500 Mm 6300 Mm : T X W X L (Mm); 120 X 2500 X 6300 [T X W X L] [Mm] , Pl 120 Mm Is2062 E250 Gr Br./K Tdc 301 Rev 12;120 X 2500 X 6300-12000; ( T X W X L) Mm; 120 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 120 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 10000;[Thickness, Length (L) & Width (W) Are In Mm]; 120 X 2500 X 10000 [T X W X L] [Mm] , Pl 125 Mm Is 2062 E 250 Gr A/Br/Sk/K; 125 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pi 125 Mm Is2062 E250 Gr Br Tdc 301 Rev 12; 125 X 3250 X 6500 [T X W X L] [Mm] , Pl 130 Mm Is2062 E350 Gr C; Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A 578 Level B.;130 Mm 2500 Mm 6000 Mm : T X W X L (Mm); 130 X 2500 X 6000 [T X W X L] [Mm] , Pl 130 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 130 X 1800 X 5600 [T X W X L] [Mm] , Pl 130 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2000 ; L= 11500;[Thickness, Length (L) & Width (W) Are In Mm]; 130 X 2000 X 11500 [T X W X L] [Mm] , Pl 140 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) Are In Mm; 140 X 2000 X 10500 [T X W X L] [Mm] , Pl 150 Mm Is 2062 E 250 Gr A/Br/Sk/K; 150 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [Mm] , Pl 150 Mm Is 2002 Grade-2; Tdc: Aa10401 Rev. 17 ; W = 2500 ; L= 8000;[Thickness, Length (L) & Width (W) Are In Mm]; 150 X 2500 X 8000 [T X W X L] [Mm] , Pl 155 Mm Is 2062 E 250 Gr Br/K Tdc:6:386 Rev 03; 155 X 1800 X 5600 [T X W X L] [Mm] , Pi 160 Mm Is2062 E250 Gr Br Tdc 301 Rev 12;Astm A435; 160 X 2500 X 6000-12000 [T X W X L] [Mm] , Pl 190 Mm Is2062 E350 Gr C Tdc:301 Rev 12 + Charpy V-Notch Impact Test In Both Longitudinal & Transverse Specimen + Ut: Astm A435, 190 Mm 2250 Mm 6300 Mm T X W X L (Mm); 190 X 2250 X 6300 [T X W X L] [Mm]

Key Dates
Publish Date 11-06-2026
Last Date of Bid Submission 22-06-2026
Tender Opening Date 22-06-2026

Contact Information
Company Name Bharat Heavy Electricals Limited
Contact Person N C Sharma
Address Noida

BOQ Items
Name of Work:- STEEL RATE CONTRACT - Qtr II 2026 - 27- Requirement of Steel Plates, Sheets & Coils
Sl. No. Item Description
1CR COIL 0.63X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.63 X 850 X Coil form [T X W X L] [mm]
2CR COIL 0.63 X 450 IS 513 DD; TDC:RTA:408:R04; 0.63 X 450 X Coil form [T X W X L] [mm]
3CR COIL 0.80X850 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 850 X Coil form [T X W X L] [mm]
4CR COIL 0.80X850 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 850 X Coil form [T X W X L] [mm]
5CR COIL 0.80X750 IS 513 CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 750 X Coil form [T X W X L] [mm]
6CR COIL 0.80X300 IS 513CR3 DD POS TOL TDC:RTA:410:R00; 0.8 X 300 X Coil form [T X W X L] [mm]
7CR COIL 0.80X300 IS 513 CR3 DD TDC:RTA:408:R04; 0.8 X 300 X Coil form [T X W X L] [mm]
8COLD ROLLED COIL 1.25 X 903 IS 513 GR.CR3; 1.25 X 903 X Coil form [T X W X L] [mm]
9CR sheet 1.6 mm IS 513 CR2 - KLD; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
101.6 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 1.6 X W=1250 X L=2500 [T X W X L] [mm]
11HR Sheets 1.6 mm IS 1079 Gr.HR2 SK/K; 1.6 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
12HR Sheet 2 mm IS 5986 Gr 205; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
13CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
14CR sheet 2.0 mm IS 513 CR2 - KLD; 2 X 1250 X 2500 [T X W X L] [mm]
15HR Sheets 2 mm IS 1079 Gr.HR1 SK/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
16HR Sheets 2 mm IS 1079 Gr.HR2 SK/K; 2 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
17HR Sheet 2.5 mm IS 5986 Gr 205; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
18HR Sheets 2.5 mm IS 1079 Gr.HR2 SK/K; 2.5 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
193.0 MM X 1250 MM X 2500 MM CRC STEEL SHEETS ANNEALED TO SPECIFICATION AA 10115 REV-09 (IS 513 CR2 KLD); 3 X W=1250 X L=2500 [T X W X L] [mm]
20HR Sheet 3.15 mm IS 5986 Gr 205; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
21HR Sheets 3.15 mm IS 1079 Gr.HR1 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
22HR Sheets 3.15 mm IS 1079 Gr.HR2 SK/K; 3.15 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
23HR Sheet 4.0mm IS 5986 Gr 205; 4 X 900 ≤ W ≤ 1250 X L = 2500 [T X W X L] [mm]
24Pl 5 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
25Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
26Pl 5 mm IS2062 E250 Gr BR/K; TDC:301 ; 5 (T) x 2000 (W) x (6300-12000) (L) [mm]; 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
27Pl 5 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 5 (T) x 2000 (W) x (6300-12000) (L); 5 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
28Pl 5 mm IS2062 E250 Gr BR/K TDC:386; 5 (T) x 1500 ≤ W ≤ 1800 (W) x (6300-12000) (L) [mm]; 5 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
29Pl 6 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
30Pl 6 mm IS 2062 E 250 Gr A/BR/SK/K; 6 X W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
31Pl 6 mm IS2062 E350 Gr BR/K TDC:301; 6 (T) x 2000 (W) x (6300-12000) (L) [mm]; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
32Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 X 1500 ≤ W ≤ 1800 X L ≤ 6300 [T X W X L] [mm]
33Pl 6 mm IS2062 E350 Gr B0/K TDC:386; 6 (T) x 2500 (W) x (6300-12000) (L) [mm]; 6 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
34CQ Pl 6 mm IS 3502; 6 X 900 ≤ W ≤ 1250 X L ≤ 6300 [T X W X L] [mm]
35Pl 6 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 6 (T) x 2000 (W) x (6300-12000) (L) mm; 6 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
36Pl 6 mm IS2062 E250 Gr BR/K TDC:386 Rev 03; 6 (T) x 2500 (W) x (6300-12000) (L) mm; 6 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
37Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
38Pl 8 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 8 X 2000 X 12000 [T X W X L] [mm]
39Pl 8 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 8 X 2900 X 10000 [T X W X L] [mm]
40Pl 8 mm IS2062 E350 Gr B0/K TDC:386; 8 (T) x 2000 (W) x (6300-12000) (L) [mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
41Pl 8 mm IS2062 E350 Gr B0/K TDC:386; 8 (T) x 2500 (W) x (6300-12000) (L) [mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
42CQ Pl 8 mm IS 3502; 8 X 900 ≤ W ≤1250 X L ≤ 6300 [T X W X L] [mm]
43Pl 8 mm IS2062 E250 Gr BR/K TDC:301; 8 (T) x 2000 (W) x (6300-12000) (L) [mm]; 8 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
44Pl 8 mm IS2062 E250 Gr BR/K TDC 301; 8 (T) X 2600 (W) X 10000 (L) [mm]; 8 X 2600 X 10000 [T X W X L] [mm]
45Pl 8 mm IS2062 E250 Gr BR/K TDC:386; 8 (T) x 2500 (W) x (6300-12000) (L) [mm]; 8 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
46Pl 8 mm IS 2062 E250Br/K TDC:6:386,; 8 X 2500 X 12000 [T X W X L] [mm]
47Pl 10 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 10 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
48Pl 10 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 10 X 2500 X L= 6300 [T X W X L] [mm]
49Pl 10 mm IS2062 E250 Gr BR/SK/K TDC 301 + UST as per ASTM A578 Level B, width 2500 mm, length 10000 mm; 10 X W = 2500 X L = 10000 [T X W X L] [mm]
50Pl 10 mm IS 2062 E250Br/K TDC 301 , width 2000mm, length 12000 mm; 10 X 2000 X 12000 [T X W X L] [mm]
51Pl 10 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
52Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2000mm, length 12000mm; 10 X 2000 X 12000 [T X W X L] [mm]
53Pl 10 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 10000mm; 10 X 2500 X 10000 [T X W X L] [mm]
54PI 10 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 10 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
55PLATE 10mm IS2062 E350B0 TDC:6:386 Rev 03; 10 X 2500 X 12000 [T X W X L] [mm]
56Pl 10 mm IS2062 E350 Gr B0/K TDC:386; 10 (T) x 2500 (W) x (6300-12000) (L) [mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
57Pl 10 mm IS2062 E250 Gr BR/K TDC:301; 10 (T) x 2500 (W) x (6300-12000) (L) [mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
58Pl 10 mm IS2062 E350 Gr BR/K TDC:301; 10 (T) x 2500 (W) x (6300-12000) (L) [mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
59Pl 10 mm IS2062 E250 Gr BR/K TDC:386; 10 (T) x 2500 (W) x (6300-12000) (L) [mm]; 10 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
60PL 10 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 6000-8000 ;[Thickness, Length (L) & Width (W) are in mm]; 10 X 2500 X 6000 ≤ L ≤ 8000 [T X W X L] [mm]
61PL 10 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 10 x 2500 x 6500 [T x W x L] [mm]; 10 X 2500 X 6500 [T X W X L] [mm]
62Pl 12 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 12 X W= 2500 X 1000 ≤ L ≤ 12500 [T X W X L] [mm]
63Pl 12 mm IS2062 E350 Gr BR/K TDC:301; 12 (T) x 2500 (W) x (6300-12000) (L) [mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
64Pl 12 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;12 mm 2500 mm 10000 mm : T X W X L (mm); 12 X 2500 X 10000 [T X W X L] [mm]
65Pl 12 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
66Pl 12 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 12 X 2500 X 12000 [T X W X L] [mm]
67PI 12 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 12 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
68Pl 12 mm IS2062 E250 Gr BR/K TDC:301; 12 (T) x 2500 (W) x (6300-12000) (L) [mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
69Pl 12 mm IS2062 E350 Gr B0/K TDC:386; 12 (T) x 2500 (W) x (6300-12000) (L) [mm]; 12 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
70PL 12MM A516 GR. 70; TDC: AA10403 REV 01 + SUPPLEMENTRY RQUIREMENTS: IMPACT TEST (S5 + SL. NO. 1 & 2 OF ANNEXURE- 1)+BEND TEST (SL. NO. 5 OF ANNEXURE-1) .; 12 X 3000 X 8000< L < 12000 [T X W X L] [mm]
71PL 12 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 12 X 2500 X 6300 [T X W X L] [mm]
72Pl 12.7 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 12.7 X 3750 X 5850 [T X W X L] [mm]
73Pl 14 mm IS2062 E250 Gr BR/K TDC:386; 14 (T) x 2500 (W) x (6300-12000) (L) [m]; 14 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
74PL 14 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 14 mm x 2500 mm x 6500 mm : T X W X L (mm); 14 X 2500 X 6500 [T X W X L] [mm]
75PLT BQ 14 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403)+Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) +Bend Test( Sl. No. 5 of Annexure-1 of AA10403); 14 X 2000 X 8000 [T X W X L] [mm]; 14 X 2000 X 8000 [T X W X L] [mm]
76Pl 16 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 16 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
77Pl 16 mm IS2062 E250 Gr B0/K TDC:301; 16 (T) x 2000 (W) x (6300-12000) (L) [mm]; 16 X 2000 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
78Pl 16 mm IS2062 E350 Gr B0/K TDC:301; 16 (T) x 2500 (W) x (6300-12000) (L); 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
79Pl 16 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;16 mm 2500 mm 8000 mm : T X W X L (mm); 16 X 2500 X 8000 [T X W X L] [mm]
80Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
81Pl 16 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 16 X 2500 X 12000 [T X W X L] [mm]
82PI 16 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 16 X 1500 ≤ W ≤ 1800 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
83Pl 16 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 16 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 16 X 2500 X L= 6300 [T X W X L] [mm]
84Pl 16 mm IS2062 E250 Gr BR/K TDC:301; 16 (T) x 2500 (W) x (6300-12000) (L) [mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
85Pl 16 mm IS2062 E350 Gr BR/K TDC:301; 16 (T) x 2500 (W) x (6300-12000) (L) [mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
86Pl 16 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
87Pl 16 mm IS2062 E350 Gr B0/K TDC:386; 16 (T) x 2500 (W) x (6300-12000) (L) [mm]; 16 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
88PL 16 MM A516 GRADE-70- Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 16 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
89PL 16 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 16 x 2500 x 5700 [T X W X L] [mm]; 16 X 2500 X 5700 [T X W X L] [mm]
90PL 16MM A516 GR. 70; TDC: AA10403 REV 01 + SUPPLEMENTRY RQUIREMENTS: IMPACT TEST (S5 + SL. NO. 1 & 2 OF ANNEXURE-1)+BEND TEST (SL. NO. 5 OF ANNEXURE-1) .; 16 X 3000 X 10000< L < 12000 [T X W X L] [mm]
91PLT BQ 16 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403)+Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403); 16 X 2000 X 10000 [T X W X L] [mm; 16 X 2000 X 10000 [T X W X L] [mm]
92PLT BQ 16 MM (SA516 GR 70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403)+Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403); 16 X 2500 X (6300 ≤ L ≤ 10000) [T X W X L] [mm]; 16 X 2500 X 6300 ≤ L ≤ 10000 [T X W X L] [mm]
93PLATE 18.0 MM; IS2062E350 GR B0; TDC:6:386:REV:03: 18 x 2500 x (10000-12000) (T x W x L) mm; 18 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
94Pl 18mm IS2062 E250 Gr B0/K TDC:386; 18 (T) x 2500 (W) x (6300-12000) (L) [mm]; 18 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
95Pl 18 mm IS2062 E350 Gr BR/K TDC:301; 18 (T) x 2500 (W) x (6300-12000) (L) [mm]; 18 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
96Pl 20 mm IS2062 E350 Gr BR/K TDC:386; 20 (T) x 2500 (W) x (6300-12000) (L) [mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
97Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 20 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
98Pl 20 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 20 X 2500 X L= 6300 [T X W X L] [mm]
99Pl 20 mm IS2062 E250 Gr A/BR/SK/K TDC 301 + UST as per ASTM A435, width 2500 mm, length 12500 mm; 20 X W= 2500 X L = 12500 [T X W X L] [mm]
100PI 20 mm IS2062 E350 Gr BR TDC 301 Rev 12; 20 X W= 2500 X L = 12000 [T X W X L] [mm]
101Pl 20 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;20 mm 2500 mm 10500 mm : T X W X L (mm); 20 X 2500 X 10500 [T X W X L] [mm]
102PLATE 20.0 MM; IS2062E350 GR B0; TDC:6:386:REV:03: 20 x 2500 x (10000-12000) (T x W x L) mm; 20 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
103Pl 20 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 20 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 20 X 2500 X L= 6300 [T X W X L] [mm]
104Pl 20 mm IS2062 E250 Gr. Br TDC 301; 20 (T) x 2500 (W) x 11375 (L) [mm]; 20 X 2500 X 11375 [T X W X L] [mm]
105Pl 20 mm IS2062 E250 Gr. Br TDC 301; 20 (T) x 2500 (W) x 8230 (L) [mm]; 20 X 2500 X 8230 [T X W X L] [mm]
106Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 16 (T) x 2500 (W) x (6300-12000) (L) mm; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
107Pl 20 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 20 x 2500 x 7100 [T X W X L] [mm]; 20 X 2500 X 7100 [T X W X L] [mm]
108Pl 20 mm IS2062 E350 Gr B0/K TDC:386; 20 (T) x 2500 (W) x (6300-12000) (L) [mm]; 20 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
109PL 20 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 6000-8000 ;[Thickness, Length (L) & Width (W) are in mm]; 20 X 2500 X 6000 ≤ L ≤ 8000 [T X W X L] [mm]
110PL 20 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 20 mm x 2500 mm x 6500 mm : T X W X L (mm); 20 X 2500 X 6500 [T X W X L] [mm]
111PLATE 20 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 20 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
112Pl BQ 20 mm (SA516 GR70) TDC: AA10403 +IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403) + SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 20 X 2500 X 12000 [T X W X L] [mm]; No. of cycles required in SHT: 01 cycle for 3 hrs or 3 cycles for 1 hr.; 20 X 2500 X 12000 [T X W X L] [mm]
113Pl 22 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B; 22 (T) X 2500 (W) X 6000 (L) [mm]; 22 X 2500 X 6000 [T X W X L] [mm]
114PL 22 MM IS2062 E350 Gr.B0 TDC 386; 22 X 2500 X 12000 [T X W X L] [mm]
115PLATE 22 MM; IS2062 E250GRBr; TDC:6:386:REV:03: 22 x 2500 x (10000-12000) (T x W x L) mm; 22 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
116PLATE 22 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 22 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
117PLT BQ 22 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403)+Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403); 22 x 2500 x 13500 [T X W X L ] [mm]; 22 X 2500 X 13500 [T X W X L] [mm]
118PLT BQ 22 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403)+Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403)+Bend Test( Sl. No. 5 of Annexure-1 of AA10403); 22 x 3000 x 10600 [T X W X L] [mm]; 22 X 3000 X 10600 [T X W X L] [mm]
119Pl 25 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 25 X 2500 X L= 6300 [T X W X L] [mm]
120Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12; 25 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
121Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435; 25 X W = 3200 X L = 7000 [T X W X L] [mm]
122Pl 25 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435; 25 X 2500 X 8000< L < 12500 [T X W X L] [mm]
123Pl 25 mm IS2062 E350 Gr BR/K TDC:301; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
124Pl 25 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.; 25 (T) X 2800 (W) X 8500 (L) [mm]; 25 X 2800 X 8500 [T X W X L] [mm]
125PI 25 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 25 X W= 2500 X L= 12000 [T X W X L] [mm]
126Pl 25 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 25 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 25 X 2500 X L= 6300 [T X W X L] [mm]
127PL.25 x 2500 x 12000 is 2062 E250 Gr. Br. TDC 6 386 Rev.03; 25 X 2500 X 12000 [T X W X L] [mm]
128Pl 25 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 25 (T) x 2500 (W) x (6300-12000) (L) mm; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
129Pl 25 mm IS2062 E350 Gr B0/K TDC:386; 25 (T) x 2500 (W) x (6300-12000) (L) [mm]; 25 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
130PL 25 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 3100 ; L= 6700;[Thickness, Length (L) & Width (W) are in mm]; 25 X 3100 X 6700 [T X W X L] [mm]
131PLATE 25 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 25 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
132PLT BQ 25 MM (SA516 GR70) TDC: AA10403 +IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403) + SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 25 x 3000 x 13500 [T X W X L] [mm]; No. of cycles required in SHT: 01 cycle for 3 hrs or 3 cycles for 1 hr.; 25 X 3000 X 13500 [T X W X L] [mm]
133Pl BQ 25 MM (SA516 GR70) TDC: AA10403 +IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403) + SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 25 X 2500 X 10000 [T X W X L] [mm]; No. of cycles required in SHT: 01 cycle for 3 hrs or 3 cycles for 1 hr.; 25 X 2500 X 10000 [T X W X L] [mm]
134Pl 28 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
135PI 28 mm IS2062 E350 Gr BR TDC 301 Rev 12; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
136Pl 28 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
137Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 28 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
138Pl 28 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 28 X W= 2500 X L= 12000 [T X W X L] [mm]
139PLT BQ 28 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 28 x 2500 x 13000 [T X W X L] [mm]; No. of cycles required in SHT: 01 cycle for 3 hrs or 3 cycles for 1 hr..; 28 X 2500 X 13000 [T X W X L] [mm]
140Pl 30 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435; 30 X 2500 X 8000< L < 12500 [T X W X L] [mm]
141Pl 30 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.; 30 (T) X 2500 (W) X 6000 (L) [mm]; 30 X 2500 X 6000 [T X W X L] [mm]
142PI 30 mm IS2062 E250 GR BR TDC:6:386 Rev 03; 30 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
143PLATE 30 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 30 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
144PL 30 mm IS 2002 GRADE-2; TDC: AA10401; W = 2500 ; L= 8000; [Thickness, Length (L) & Width (W) are in mm]; 30 X 2500 X 8000 [T X W X L] [mm]
145Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
146Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 32 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
147Pl 32 mm IS 2062 E 250 Gr A/BR/SK/K TDC:301 Rev 12; 32 X 2500 X L= 6300 [T X W X L] [mm]
148Pl 32 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
149PLATE-32 IS2062 E250BR TDC:301 Rev 12; 32 X 2500 X 12000 [T X W X L] [mm]
150Pl 32 mm IS2062 E250 Gr BR/K TDC 301 Rev 12 + UST as per ASTM A435,width 2500 mm, length 12500 mm; 32 X W = 2500 X L = 12500 [T X W X L] [mm]
151PI 32 mm IS2062 E350 Gr BR TDC 301 Rev 12; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
152Pl 32 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B; 32 (T) X 2500 (W) X 7500 (L) [mm]; 32 X 2500 X 7500 [T X W X L] [mm]
153Pl 32 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
154PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 32 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
155PI 32 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 32 X W= 2500 X L= 12000 [T X W X L] [mm]
156Pl 32 mm IS2062 E250 Gr BR/K ;TDC 301 Rev 12; (Impact test at room temperature is mandatory); UT as per ASTM A435: 32 x 2500 x 6300 ; T (mm) x W (mm) x L (mm); 32 X 2500 X L= 6300 [T X W X L] [mm]
157Pl 32 mm IS2062 E250 Gr. Br/K TDC 301; 32 (T) x 2500 (W) x 7500 (L) [mm]; 32 X 2500 X 7500 [T X W X L] [mm]
158PL 32 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 32 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
159PL 32 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 32 mm x 2500 mm x 6500 mm : T X W X L (mm); 32 X 2500 X 6500 [T X W X L] [mm]
160PL 32 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 32 X 2500 X 6300 ≤ L ≤ 10500 [T X W X L] [mm]
161Pl BQ 32MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test (Sl. No. 5 of Annexure-1 of AA10403) + SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 32 X 2500 X 10000 [T X W X L] [mm]; No. of cycles required in SHT: 01 cycle for 3 hrs or 3 cycles for 1 hr.; 32 X 2500 X 10000 [T X W X L] [mm]
162PI 34 mm IS2062 E350 Gr BR TDC 301 Rev 12; 34 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
163Pl 34 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 34 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
164PLATE 34 MM; IS2062 E250GRBr; TDC::301:REV:12: 34 x 2500 x (10000-12000) (T x W x L) mm; 34 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
165Pl 35 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;35 mm 1500 mm 8000 mm : T X W X L (mm); 35 X 1500 X 8000 [T X W X L] [mm]
166PLATE 35 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 35 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
167Pl 36 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 36 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
168Pl 36 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12500mm; 36 X W=2500 X L =12500 [T X W X L] [mm]
169PI 36 mm IS2062 E350 Gr BR/K TDC 301 Rev 12; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
170Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
171Pl 36 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 36 X 4500 X 8500 [T X W X L] [mm]
172Pl 36 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 36 X W= 2500 X L= 12000 [T X W X L] [mm]
173Pl 36 mm IS2062 E250 Gr. Br/K TDC 301; 36 (T) x 2500 (W) x 9000 (L) [mm]; 36 X 2500 X 9000 [T X W X L] [mm]
174PL 36 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 3100 ; L= 6700 ;[Thickness, Length (L) & Width (W) are in mm]; 36 X 3100 X 6700 [T X W X L] [mm]
175PL 36 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 36 X 2000≤ W ≤2500 X 8000 ≤ L ≤12500 [T X W X L] [mm]
176PLATE 38 MM; IS2062 E350GR Br; TDC::301:REV:12: 38 x 2500 x (10000-12000) (T x W x L) mm; 38 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
177Pl 40 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
178Pl 40 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435, width 2500mm, length 12000mm; 40 X W=2500 X L =12000 [T X W X L] [mm]
179PI 40 mm IS2062 E350 Gr BR TDC 301 Rev 12; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
180Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X W= 3800 X L= 5700 [T X W X L] [mm]
181Pl 40 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
182Pl 40 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 40 X 2500 X 12000 [T X W X L] [mm]
183Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 40 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
184Pl 40 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 40 X W= 2500 X L= 12000 [T X W X L] [mm]
185PLATE 40.0 MM; IS2062E350GRB0; TDC:6:386:REV:03: 40 x 2500 x (10000-12000) (T x W x L) mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
186PLATE 40 MM; IS2062 E350GR Br; TDC::301:REV:12: 40 x 2500 x (10000-12000) (T x W x L) mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
187PLATE 40 MM; IS2062 E250GRBr; TDC:6:386:REV:03: 40 x 2500 x (10000-12000) (T x W x L) mm; 40 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
188Pl 40 mm IS2062 E350 Gr BR/K TDC 301 + UST as per ASTM A435; 40 (T) x 2500 (W) x 12000 (L) [mm]; 40 X 2500 X 12000 [T X W X L] [mm]
189PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 6000< L < 12000 [T X W X L] [mm]
190PLATE 40 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 40 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
191PL 40 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 1 & 2 of Annexure-1) + Bend Test( Sl. No. 5 of Annexure-1); 40 X 2500 X 8400 [T X W X L] [mm]
192PLT BQ 40 MM (SA516 GR70) TDC: AA10403 + IBR (sl.no. 3.6.1 of AA10403) + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + Bend Test( Sl. No. 5 of Annexure-1 of AA10403)+ SIMULATION HEAT TREATMENT (S5 + sl.no.8 of Annexure 1 of AA10403); 40 x 2500 x 9000 [T X W X L] [mm]; No. of cycles required in SHT: 01 cycle for 3 hrs or 3 cycles for 1 hr.; 40 X 2500 X 9000 [T X W X L] [mm]
193Pl 42 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.; 42 (T) X 2500 (W) X 6000 (L) [mm]; 42 X 2500 X 6000 [T X W X L] [mm]
194Pl 45 mm IS2062 E250 Gr Br.K TDC 301 Rev 12;45 x 2500 x 6300-12000; ( T x W x L) mm; 45 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
195Pl 45 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 45 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
196Pl 45 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 45 X 2500 X 12000 [T X W X L] [mm]
197Pl 45 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm; 45 X 2500 X 12000 [T X W X L] [mm]
198PLATE 45.0 MM; IS2062E350GRB0; TDC:6:386:REV:03: 45 x 2500 x (10000-12000) (T x W x L) mm; 45 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
199PLATE 45 MM; IS2062 E350GR Br; TDC::301:REV:12: 45 x 2500 x (10000-12000) (T x W x L) mm; 45 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
200Pl 45 mm IS2062 E350 GR B0; TDC:386; 45 (T) x 2000 (W) x (10000-12000) (L) [mm]; 45 X 2000 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
201PLATE 45.0 MM - A515GR70 + IBR requirement; 45 X 1000-2500 X 5000 ≤ L ≤ 10000 [T X W X L] [mm]
202Pl 50 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 50 X W= 2500 X 10000 ≤ L ≤ 12500 [T X W X L] [mm]
203Pl 50 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.; 50 (T) X 2500 (W) X 6000 (L) [mm]; 50 X 2500 X 6000 [T X W X L] [mm]
204Pl 50 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
205Pl 50 mm IS 2062 E250Br/K TDC:6:386, width 2500mm, length 12000mm; 50 X 2500 X 12000 [T X W X L] [mm]
206PI 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
207Pl 50 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 50 X W= 2500 X L= 12000 [T X W X L] [mm]
208PLATE 50.0 MM; IS2062E350GRB0; TDC:6:386:REV:03: 50 x 2500 x (10000-12000) (T x W x L) mm; 50 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
209PLATE 50 MM; IS2062 E350GR Br; TDC::301:REV:12: 50 x 2500 x (10000-12000) (T x W x L) mm; 50 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
210Pl 50 mm IS2062 E350 GR B0; TDC:386; 50 (T) x 2000 (W) x (10000-12000) (L) [mm]; 50 X 2000 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
211Pl 50 mm (SA 516 GR 70) TDC : AA10403; 50 X 1820 X 10750 [T X W X L] [mm]; 50 X 1820 X 10750 [T X W X L] [mm]
212Pl 50 mm (SA 516 GR 70) TDC : AA10403; 50 X 2600 X 10000 [T X W X L] [mm]; 50 X 2600 X 10000 [T X W X L] [mm]
213PL 55 MM IS2062 E350 Gr.B0 TDC 386; 55 X 2500 X 12000 [T X W X L] [mm]
214Pl 56 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
215Pl 56 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 56 X W=2500 X L =8000 [T X W X L] [mm]
216PLATE-56 IS2062 E250BR TDC:301 Rev 12; 56 X 2500 X 12000 [T X W X L] [mm]
217PI 56 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 56 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
218Pl 56 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm; 56 X 2500 X 12000 [T X W X L] [mm]
219PLATE 56 MM; IS2062 E350GR Br; TDC::301:REV:12: 56 x 2500 x (10000-12000) (T x W x L) mm; 56 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
220PI 60 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 60 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
221Pl 63 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
222Pl 63 mm IS2062 E250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 63 X W=2500 X L =8000 [T X W X L] [mm]
223PI 63 mm IS2062 E350 Gr BR/K TDC 301 Rev 12; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
224Pl 63 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;63 mm 2500 mm 9500 mm : T X W X L (mm); 63 X 2500 X 9500 [T X W X L] [mm]
225Pl 63 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
226PI 63 mm IS2062 E350 Gr B0 TDC:6:386 Rev 03; 63 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
227Pl 63 mm IS 2062 E350B0 TDC:6:386, width 2500mm, length 12000mm; 63 X 2500 X 12000 [T X W X L] [mm]
228PL 63 IS 2062 E250GR-BR/K TDC:301, 63 X 2150 X 12000 [T X W X L] [mm]; 63 X 2150 X 12000 [T X W X L] [mm]
229PL 63 IS 2062 E250GR-BR/K, TDC:301, 63 X 1875 X 9000 [T X W X L] [mm]; 63 X 1875 X 9000 [T X W X L] [mm]
230PLATE 63.0 MM; IS2062E250 GR Br.; TDC:6:386:REV:03: 63 x 2500 x (10000-12000) (T x W x L) mm; 63 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
231PL 63 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 3600 ; L= 7800;[Thickness, Length (L) & Width (W) are in mm]; 63 X 3600 X 7800 [T X W X L] [mm]
232PL 63 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 63 mm x 2500 mm x 6500 mm : T X W X L (mm); 63 X 2500 X 6500 [T X W X L] [mm]
233Pl 63 mm (SA 516 GR 70) TDC : AA10403; 63 X 1800 X 12000 [T X W X L] [mm]; 63 X 1800 X 12000 [T X W X L] [mm]
234Pl 70 mm IS 2062 E 250 Gr A/BR/SK/K; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
235Pl 70 mm IS 2062 E 250 Gr BR/K TDC 301, width 2500mm, length 8000mm; 70 X W=2500 X L =8000 [T X W X L] [mm]
236Pl 70 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;70 mm 2000 mm 8500 mm : T X W X L (mm); 70 X 2000 X 8500 [T X W X L] [mm]
237Pl 70 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 70 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
238PL 70 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 8000-10000 ;[Thickness, Length (L) & Width (W) are in mm]; 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
239PLATE 70 MM ; TDC: AA10404-05 + Supplementary requirements: UT (S12); 70 X 2500 X 8000 ≤ L ≤ 10000 [T X W X L] [mm]
240Pl 70 mm (SA 516 GR 70) TDC : AA10403; 70 X 1820 X 10750 [T X W X L] [mm]; 70 X 1820 X 10750 [T X W X L] [mm]
241Pl 70 mm (SA 516 GR 70) TDC : AA10403; 70 X 2600 X 10000 [T X W X L] [mm]; 70 X 2600 X 10000 [T X W X L] [mm]
242PLATE 75.0 MM; IS2062E350GRB0; TDC:6:386:REV:03: 75 x 2500 x (10000-12000) (T x W x L) mm; 75 X 2500 X 10000 ≤ L ≤ 12000 [T X W X L] [mm]
243Pl 80 mm IS 2062 E 250 Gr A/BR/SK/K; 80 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
244PI 80 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12; 80 X W= 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
245Pl 80 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B.;80 mm 2500 mm 7000 mm : T X W X L (mm; 80 X 2500 X 7000 [T X W X L] [mm]
246PL 80 IS 2062 E250GR-BR/K, TDC:301, 80 X 2500 X 7650 [T X W X L] [mm]; 80 X 2500 X 7650 [T X W X L] [mm]
247Pl 80 mm IS2062 E250 Gr BR/K TDC 301 + UST as per ASTM A435; 80 (T) X 2500 (W) X 10000 (L) [mm]; 80 X 2500 X 10000 [T X W X L] [mm]
248Pl 80 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 80 x 2850 x 10700 [T X W X L] [mm]; 80 X 2850 X 10700 [T X W X L] [mm]
249PL 80 mm A516 Gr.70; TDC: AA10403 + Impact test (S5 + sl.no. 3 of Annexure 1 of AA10403) + IBR (sl.no. 6 of Annexure 1 of AA10403); 80 X 2500 X 6300 [T X W X L] [mm]
250Pl 90 mm IS 2062 E 250 Gr A/BR/SK/K; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
251Pl 90 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B; 90 (T) X 2500 (W) X 10000 (L) [mm]; 90 X 2500 X 10000 [T X W X L] [mm]
252Pl 90 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 90 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
253Pl 100 mm IS 2062 E250 Gr BR; 100 X 2500 X 6000< L < 12000 [T X W X L] [mm]
254Pl 100 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + UT: ASTM A 578 Level B.;100 mm 2500 mm 12000 mm : T X W X L (mm); 100 X 2500 X 12000 [T X W X L] [mm]
255Pl 100 mm IS2062 E350 Gr C; TDC:301 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + Bend Test + UT: ASTM A 578 Level B + Through thickness tension testing to Quality class Z25 (as per EN10164); 100 (T) X 2500 (W) X 11000 (L) [mm]; 100 X 2500 X 11000 [T X W X L] [mm]
256PI 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 100 X W= 4400 X L= 4600 [T X W X L] [mm]
257Pl 100 mm IS2062 E250 Gr BR/K TDC:6:386 Rev 03; 100 x 2500 x 6000 [T X W X L] [mm]; 100 X 2500 X 6000 [T X W X L] [mm]
258Pl 100 mm IS2062 E250 Gr BR/K; TDC:386; 100 (T) x 3500 (W) x 7000 (L) [mm]; 100 X 3500 X 7000 [T X W X L] [mm]
259PL 100 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2200 ; L= 4800;[Thickness, Length (L) & Width (W) are in mm]; 100 X 2200 X 4800 [T X W X L] [mm]
260Pl 100 mm IS 2002 GRADE-2; TDC: AA10401; 100 (T) x 4000 (W) x 4000 (L) [mm]; 100 X 4000 X 4000 [T X W X L] [mm]
261PL 100 MM SA515 GRADE-70 AA10404-05 + Supplementary requirements: Impact test at room temperature+orientation of the test specimen in longitudinal direction(S5); 100 X 2200 X 4800 [T X W X L] [mm]
262Pl 110 mm IS 2062 E 250 Gr A/BR/SK/K; 110 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
263Pl 110 mm IS2062 E250 Gr A/BR/SK/K TDC 301 Rev 12;110 x 2500 x 6300-12000; ( T x W x L) mm; 110 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
264Pl 110 mm IS 2062 E 350 Gr B0 TDC:6:386 Rev 03; 110 X 2000≤ W ≤ 2500 X 6000 ≤ L ≤ 12000 [T X W X L] [mm]
265Pl 110 mm IS2062 E250 Gr Br./K TDC:386; 110 (T) x 2500 (W) x 10000 (L) [mm]; 110 X 2500 X 10000 [T X W X L] [mm]
266PL 110 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 1100 ; L= 12000;[Thickness, Length (L) & Width (W) are in mm]; 110 X 1100 X 12000 [T X W X L] [mm]
267PL 110 MM A516 GRADE-70; TDC : AA10403 + Supplementary Requirements: Impact Test (S5 + Sl. No. 2 & 3 of Annexure-1); 110 X 2000≤ W ≤2500 X 6000 ≤ L ≤ 8000 [T X W X L] [mm]
268Pl 115 mm IS 2062 E 250 Gr A/BR/SK/K; 115 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
269Pl 120 mm IS 2062 E 250 Gr A/BR/SK/K; 120 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
270Pl 120 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + UT: ASTM A 578 Level B.;120 mm 2500 mm 6300 mm : T X W X L (mm); 120 X 2500 X 6300 [T X W X L] [mm]
271Pl 120 mm IS2062 E250 Gr BR./K TDC 301 Rev 12;120 x 2500 x 6300-12000; ( T x W x L) mm; 120 X 2500 X 6300 ≤ L ≤ 12000 [T X W X L] [mm]
272PL 120 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 10000;[Thickness, Length (L) & Width (W) are in mm]; 120 X 2500 X 10000 [T X W X L] [mm]
273Pl 125 mm IS 2062 E 250 Gr A/BR/SK/K; 125 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
274PI 125 mm IS2062 E250 Gr BR TDC 301 Rev 12; 125 X 3250 X 6500 [T X W X L] [mm]
275Pl 130 mm IS2062 E350 Gr C; TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + UT: ASTM A 578 Level B.;130 mm 2500 mm 6000 mm : T X W X L (mm); 130 X 2500 X 6000 [T X W X L] [mm]
276Pl 130 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 130 X 1800 X 5600 [T X W X L] [mm]
277PL 130 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2000 ; L= 11500;[Thickness, Length (L) & Width (W) are in mm]; 130 X 2000 X 11500 [T X W X L] [mm]
278PL 140 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2000 ; L= 10500;[Thickness, Length (L) & Width (W) are in mm; 140 X 2000 X 10500 [T X W X L] [mm]
279Pl 150 mm IS 2062 E 250 Gr A/BR/SK/K; 150 X 2000 ≤ W ≤ 2500 X 8000 ≤ L ≤ 12000 [T X W X L] [mm]
280PL 150 mm IS 2002 GRADE-2; TDC: AA10401 Rev. 17 ; W = 2500 ; L= 8000;[Thickness, Length (L) & Width (W) are in mm]; 150 X 2500 X 8000 [T X W X L] [mm]
281Pl 155 mm IS 2062 E 250 Gr BR/K TDC:6:386 Rev 03; 155 X 1800 X 5600 [T X W X L] [mm]
282PI 160 mm IS2062 E250 Gr BR TDC 301 Rev 12;ASTM A435; 160 X 2500 X 6000-12000 [T X W X L] [mm]
283Pl 190 mm IS2062 E350 Gr C TDC:301 Rev 12 + Charpy V-Notch Impact Test in both Longitudinal & Transverse Specimen + UT: ASTM A435, 190 mm 2250 mm 6300 mm T X W X L (mm); 190 X 2250 X 6300 [T X W X L] [mm] Please Enable Macros to View BoQ information

Other Detail
Information Source https://eprocurebhel.co.in/nicgep/app
Download FileName File Description File Size
Download 076453b7-3398-465f-993d-6e13ddef76ce.html Tender Documents 0 KB
Download BOQ_67387.xls Tender Documents 0 KB
Download Tendernotice_1.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.