|
| 1 | Excavation in foundation in ordinary soil (loam clay or sand) including lift upto 1.50 meter and lead upto 30 meter and including filling, watering and ramming of excavated earth into the trenches or into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of sur-plus earth as directed by the Engineer incharge up to a distance of 30 meters from the foundation trenches. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge.All kinds of soil |
| 3 | Filling of carted earth |
| 4 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineerin- Charge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 |
| 5 | Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 kms. from the site of work and including watering, dressing etc rate to include cost of all materials labour T & P etc required for proper completion of work. |
| 6 | M-150 brick work in 1:6 cement and coarse sand of 2.25 fineness modulus) mortar in foundation & plinth including supply of all materials, labour, T & P etc reqiored for proper completion of the work. |
| 7 | Providing and laying Polished Granite stone flooring in required designand patterns, in linear as well as curvilinear portions of the building allcomplete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab of colour Black, Cherry/RubyRed or equivalent |
| 8 | 40 mm thick rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement : 5 coarse sand) with joints 3 mm thick, side buttered with cement mortar 1:2 (1 cement : 2 stone dust) admixed with pigment to match the shade of stone and pointing with same mortar.Red sand stone |
| 9 | Providing and laying machine cut, mirror polished Marble stone flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. . 18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc. |
| 10 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : Red sand stone -design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor exposed face fine dressed with rough backing . 60mm thick |
| 11 | Providing, fabricating, supplying, transporting and erecting prefabricated Electric Safety Chamber of overall size 4.85 m x 4.85 m and height 3.30 m from finished plinth level, having internal clear size approximately 4.04 m x 3.815 m, constructed with fire-retardant treated seasoned hardwood/chemically treated sal wood framework including base frame not less than 100 mm x 75 mm anchored to RCC plinth with suitable anchor fasteners and anti-termite treatment, wall panels comprising outer cladding with minimum 0.50 mm thick pre-painted galvanized iron sheet, inner lining with 12 mm thick BWR grade plywood/cement fibre board and 50 mm thick fire-retardant mineral wool/PUF insulation with aluminium foil vapour barrier complete with trims, flashing and PU sealant, prefabricated sloping roof consisting of treated wooden rafters, 12 mm thick BWR plywood underdeck, waterproof membrane, 50 mm thick thermal insulation and country clay tile roofing fixed over GI battens including ridge and edge tiles complete, providing and fixing one insulated door of size approximately 1000 mm x 2100 mm with wooden frame and GI sheet cladding on both sides including all fittings and locking arrangement, providing two nos. GI louvered ventilators with insect proof mesh, making provision for cable entry with rubber grommets, earthing of all GI sheet components, providing flame retardant insulation, internal surface finished with primer and enamel paint and external surface in factory pre-painted finish, including all fittings, fixtures, hardware, sealants, transportation, labour and incidental works complete,design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. |
| 12 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) |
| 13 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 14 | Concrete of M25 grade with minimum cement content of 330 kg /cum |
| 15 | Foundations, footings, bases of columns, etc. for mass concrete |
| 16 | Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. |
| 17 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 18 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 19 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.. |
| 20 | Providing and laying perforated sand stone 70-150 mm thick including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), CNC cutting, moulding, etching, buffing and polishing. The molding work shall be of very good quality. The work to be fixed in line, level in all respect with cement slurry with matching pigment .design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor |
| 21 | Providing and fixing Glass mossaic tiles on finished plain wall surfaceof size 20 mm x 20 mm x 4 mm in all colour, design , fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material. design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor.(Nuvocotto/Prayag clay tile or equivalent) |
| 22 | Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. Red sand stone |
| 23 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. White / Pink/Gray sand stone - exposed face fine dressed with rough backing .60mm thick |
| 24 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. |
| 25 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. |
| 26 | Providing & fixing White River (Stone) Pebbles size of 2\\" to 2.5\\" dia in natural colour at site of work including loading, unloading, carriage and all taxes paid etc.and as per direction of officer in charge. The cost is inclusive of preparation of sample preparation and approval from the Architect in charge. |
| 27 | i) Research: Undertaking complete and comprehensive research on the life, contributions, political journey, public service, and legacy of Babu Kalyan Singh, based on the advisory note and tender requirements. The scope of work shall include, but not be limited to, engagement of expert research personnel, consultation with historians, subject experts, and associates, travel, boarding, lodging, meetings, collection and study of reference materials, identification and compilation of archival resources, preparation of drafts, documentation, printing, stationery, consumables, and development of a detailed Content Document for submission to and approval by the Architect/Engineer-in-Charge. Archival Acquisition:Procurement and acquisition of all relevant archival materials related to Babu Kalyan Singh and associated historical, political, social, and cultural events, including photographs, films, manuscripts, letters, diaries, speeches, sketches, working drafts, records, artifacts, and other reference materials from government, institutional, and private sources. The scope shall include obtaining necessary usage rights and permissions for museum display and exhibition purposes, along with digitization, editing, restoration, image correction, touch-up, reproduction, and documentation, complete as approved by the Architect/Engineer-in-Charge |
| 28 | The scope shall include concept development, research-based visualization, artwork preparation, graphic design, digital illustration, image treatment, compositing, content layouting, text integration, fabrication-ready artwork preparation, and installation coordination complete in all respects. All graphical content and illustrations shall be developed in consultation with subject experts and shall be complete, accurate, aesthetically curated, and approved by the Engineer-in-Charge (EIC) |
| 29 | Filtration Plant bobbin Wound made with Thermoplastic resin , complete with Six way Multiport Valve , internal distrubution system, Dual grade FilterMedia with granulometry 0.4 mm -6 mm. Capable to cater a flow rate of 14 m3/hr @50 m3/hr/m2 filtration velocity. Make : Pentair/Certikin (Astral) |
| 30 | Recirculation Pump with in-built hair strainer of 1.0 H.P Capacity. Make : Pentair/Certikin (Astral) |
| 31 | Chemical Dosing System for Chlorine and Alum Dosing @ 0-5 LPH dosing with Suction and Injection Pipes and 100 Litres Chemical Tank Make : Pentair / Certikin (Astral) |
| 32 | Inlet Nozzles made in white ABS For Pool. Make : Pentair |
| 33 | Main Drain grates made of ABS of size 300 mm X 300 mm With frame . |
| 34 | Cleaning set Comprising of Anodised Aluminium Vaccum head, telescopic pole, curved brush, straight brush, algae brush, leaf skimmer, butterfly skimmer , test kit , vaccum hose 15 m long . |
| 35 | overflow grating 245 mm width ABS plastic UV stabilized (make-pentair/Equiv) |
| 36 | Providing and Fixing of complete Hydraulic system of pool interconnecting main pool , Balancing tank and Filteration Plant room with required valves and specials . Make Supreme/Finolex (06 Kg Pressure rating) |
| 37 | EXPERIENTIAL MURAL WALL |
| 38 | Providing and laying at or near ground level factory made kerb stone of Sandstone of approved shape and size as per Architect in charge in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm),including making drainage opening wherever required complete etc. as per direction of Engineerin- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Stone shall be approved by Engineer-in-charge and Architect in charge).The cost is inclusive of preparation of sample preparation and approval from the Architect in charge. |
| 39 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 40 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly leveling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 41 | Supplying and stacking of good earth at site including royalty but including carriage 1km (earth measusred in stacks will be reduced by 20% for payment). |
| 42 | Supplying and stacking at site dump manure from approved source, including carriage up to 1 km (manure measured in stacks will be reduced by 8% for payment) : Screened through sieve of I.S. designation 16 mm |
| 43 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge.. |
| 44 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 45 | Rough dressing the trenched ground including breaking the clods. |
| 46 | Fine dressing the ground |
| 47 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) :Holes 90 cm dia, and 90 cm deep |
| 48 | Providing and stacking of Mimusops elengi (Maulsri) of height 180-195 cm., well developed with thick stem in big in big size HDPE bag as per direction of the officer-in-charge. |
| 49 | Providing and stacking of Ficus benjamina (green) of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge. |
| 50 | Providing and stacking of Plumeria alba of height 165-180 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 51 | Providing and stacking of Largerstroemia indica of height 90-105 cm multibranched in poly bags of size 25 cm as per direction of the officer-in-charge. |
| 52 | Providing and stacking of Plumeria rubra of height 120-150 cm. with 3-4 branches and thick stem in big size HDPE bags as per direction of the officer-in-charge. |
| 53 | Providing and stacking of Cassia fistula (Amaltash) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 54 | Providing and stacking of Tabebuia sp. of height 150-165 cm. in big polybags of size 25 cm as per direction of the officer-in-charge. |
| 55 | Providing and stacking of Lagerstroemia flosreginae of height 150-165 cm.in big poly bag of size 25 cm as per direction of the officer-in-charge. |
| 56 | Providing and stacking of Bauhinia blakeana (Kachnar) of height 120-150 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. |
| 57 | Providing and stacking of Putranjiva roxburghii of height 90-105 cm. in big polybag of size 25 cm as per direction of the officer-in-charge. |
| 58 | Providing and displaying of Rhapis Palm plant, having ht. 75 cm to 90 cm with 15 to 18 equal suckers, well developed, full of fresh and healthy leaves from bottom to top in 35 cm PVC Pots/C.Pots & as per direction of the officer-in-charge. |
| 59 | Providing and stacking of Phoenix sylvestris Roxb. (Wild date palm/khajur) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge. |
| 60 | Providing and Displaying Bamboo Buddha Valley with fresh & healthy 5 to 6 suckers 1.80 m to 2.10m ht umbrella type plant well developed in 50 cm Cement Pot as per direction of the officer-in-charge. |
| 61 | Providing and Displaying Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot as per direction of the officer-in-charge. |
| 62 | Providing and Displaying Cycus revoluta specimen , having 45 to 50 fresh and healthy, leaves having 30cm to 35cm circumfrance of base stem well developed in 40 cm challi, as per direction of the officer-in-charge. |
| 63 | Providing and displaying of Aglaonema Butterfly having ht.30 cm 10 to 12 fresh, healthy and attractive colorful leaves, well developed in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 64 | Providing and stacking of Chandni dwarf of height 15-20 cm., well branched in earthen pots of size 20 cm as per direction of the officer-in-charge. |
| 65 | Providing and stacking of Tabernaemontana divaricata (Chandni double) of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 66 | Providing and stacking Mogra of height 25 to 30 cm., 2 to 3 branch in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer in-charge. |
| 67 | Providing and stacking of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge |
| 68 | Providing of Schefflera Green (three in one), mounted on moss stick 90 cm, well developed with full of fresh & healthy leaves from bottom to top with rich foliage in 25 cm size of Earthen pot/Plastic pot.as per direction ofofficer-in-charge. |
| 69 | Providing and stacking of Ficus panda of height 60-90 cm, with 8-10 branches, and healthy foliage, bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 70 | Providing and stacking of Murraya exotica of height 45-60 cm. in poly bags of size 15 cm as per direction of the officer-in-charge. |
| 71 | Providing and stacking of Hibiscus rosasinensis of height 90-105 cm., bushy in big size HDPE bag as per direction of the officer-in-charge. |
| 72 | Providing and stacking of Ficus long Island of height 15 cm to 20 cm, full of branches and foliage in 20 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 73 | Providing and Displaying of Schefflera green 3 in 1 well developed with fresh, healthy and attractive foliage from having 45 cm to 60 cm ht. in 25 cm size Earthen pot/Plastic pot/as per direction of officer-in-charge. |
| 74 | Providing and stacking of Duranta Golden, having ht.15 to 20 cm bushty shape with fresh and healthy leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 75 | Providing and stacking of Alternanthera species of height 15 cm to 20 cm, full of branches and foliage in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 76 | Providing and Displaying Acalypha Different colour well developed, fresh & healthy with good foliage, multi branch 30 to 45 cm ht. in 20 cm size of Earthen Pot/ Plastic Pot bushy plant as per direction of the officer-in-charge. |
| 77 | Providing and stacking of Wedelia trilobata, full of leaves in 15 cm size of Earthen Pot / Plastic Pot & as per direction of the officer-in-charge. |
| 78 | Providing and stacking of Daniella variegated, with 3 to 4 variegated leaves in 20 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 79 | Providing and displaying of Philodendron Xanadu having 15 to 20 leaves, well developed with full of fresh & healthy leaves in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 80 | Providing and stacking of Tradescantia zebrina having in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 81 | Providing and stacking of Asparagus marrie, well developed 15 to 20 leaves, full of branches and foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 82 | Providing and stacking of Syngonium miniature dwarf, having height 30-45 cm. with 2-3 suckers healthy foliage in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge |
| 83 | Providing and Displaying Portulaca hybrid in different colour with bloom well developed fresh & healthy in 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge. |
| 84 | Providing and stacking of Ophiopogon, Green/Black full of leaves in 15 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge. |
| 85 | Providing and stacking of Ophiopogon jaburan ( variegated ),full of variegated leaves in Earthen Pot/Plastic Pot of size 20 cm. as per direction of the officer-in-charge. |
| 86 | Providing and Stacking of Lemon grass of ht. 30cm with multi branches in Poly bag of size 20 cm. as per direction of the officer-in-charge |
| 87 | Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions |
| 88 | Providing and stacking of Clerodendrum splendens of height 30 cm to 45cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 89 | Providing and stacking of Tecoma grandiflora of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. |
| 90 | Resting Areas for Tourist (Benches) Providing & fixing of red Sandstone/MS bench size 1500mm length and 450mm and height 600 mm including foundation & support with all necessary T&P etc all complete as per design of direction in Engineer/ Architect in charge. |
| 91 | Urban Litter Bins Providing & fixing of RAILA LIITER BIN The body of the litter bin is made up of galvanized steel structure treated with powder coating. There is a lockable hinged door on the front part. The sheathing consists of 10 solid wooden lamellas. Inside of the litter bin there is a removable SS container with volume of 50 litres. Also includes the cost of preparationof shop drawing, and sample preparation and approval from Architect in charge (make Chevron/MMCITE or equivalent) |
| 92 | Directional & Informative Signages Providing and fixing outdoor free-standing directional/information signage of overall size 750mm x 1050mm fabricated using 3mm thick aluminium sheet, complete with internal structural framework, rear side boxing, pedestal base, etching work, and powder coated finish as per approved drawings and specifications. The signage panel shall be machine cut and edge finished with internal stiffening framework made of minimum 25mm x 25mm x 2mm thick MS square tube sections to ensure proper rigidity and to prevent bending or deformation. Rear side aluminium/MS boxing of minimum 50mm depth shall be provided for concealed support and structural stability. The signage shall include CNC/laser etched graphics, maps, text, symbols, and directional details with approved paint infill/engraving finish. The complete surface shall be properly cleaned, treated, and finished with exterior grade powder coating of approved shade and texture with minimum 60–80 micron coating thickness along with protective UV/weather resistant clear coating suitable for outdoor conditions.The signage shall be mounted on a pedestal/base fabricated from minimum 50mm x 50mm x 3mm MS box sections with adequate internal structural framing, base plate, anchor fasteners, concealed connections, welding, grinding, and finishing complete. The pedestal shall include outer metal cladding/finished surface as approved and shall be fixed over RCC foundation with necessary grouting and alignment. All nuts, bolts, screws, and fixtures shall be in SS 304 grade. Shop drawings, fabrication details, structural details, fixing methodology, and finish samples shall be prepared by the specialized vendor assigned through the contractor and shall be submitted for approval from the Architect-in-Charge prior to fabrication and installation. The item includes all materials, labour, fabrication, transportation, loading/unloading, installation, testing, finishing, and commissioning complete in all respects as per approved drawing and direction of Architect-in-Charge.. Also includes the cost of preparationof shop drawing, and sample preparation and approval from Architect in charge. |
| 93 | Providing and fixing outdoor free-standing directional/information signage of overall size 750mm x 1800mm fabricated using 3mm thick aluminium sheet, complete with internal structural framework, rear side boxing, pedestal base, etching work, and powder coated finish as per approved drawings and specifications. The signage panel shall be machine cut and edge finished with internal stiffening framework made of minimum 25mm x 25mm x 2mm thick MS square tube sections to ensure proper rigidity and to prevent bending or deformation. Rear side aluminium/MS boxing of minimum 50mm depth shall be provided for concealed support and structural stability. The signage shall include CNC/laser etched graphics, maps, text, symbols, and directional details with approved paint infill/engraving finish. The complete surface shall be properly cleaned, treated, and finished with exterior grade powder coating of approved shade and texture with minimum 60–80 micron coating thickness along with protective UV/weather resistant clear coating suitable for outdoor conditions. The signage shall be mounted on a pedestal/base fabricated from minimum 50mm x 50mm x 3mm MS box sections with adequate internal structural framing, base plate, anchor fasteners, concealed connections, welding, grinding, and finishing complete. The pedestal shall include outer metal cladding/finished surface as approved and shall be fixed over RCC foundation with necessary grouting and alignment. All nuts, bolts, screws, and fixtures shall be in SS 304 grade. Shop drawings, fabrication details, structural details, fixing methodology, and finish samples shall be prepared by the specialized vendor assigned through the contractor and shall be submitted for approval from the Architect-in-Charge prior to fabrication and installation. The item includes all materials, labour, fabrication, transportation, loading/unloading, installation, testing, finishing, and commissioning complete in all respects as per approved drawing and direction of Architect-in-Charge.. Also includes the cost of preparationof shop drawing, and sample preparation and approval from Architect in charge |
| 94 | Outdoor Drinking Water : Supply, installation, testing, and commissioning of a water dispensing station, model FS2-F140R by OASIS or an approved equivalent. The unit shall be designed for robust, continuous public use and must be suitable for indoor or outdoor installation depending on the site requirement. The system should be a floor-mounted, bottle-filling station integrated with a bubbler, constructed using high-quality stainless steel or powder-coated galvanized metal that ensures durability, corrosion resistance, and vandal protection. The unit must be equipped with either a sensor-based or manual push-button bottle filler activation system to ensure user convenience and hygiene. The water station should be capable of delivering a minimum of 8 gallons per hour of cooled drinking water, supported by a sealed refrigeration system utilizing eco-friendly refrigerants such as R134a or R600a. The unit must include a filtration mechanism featuring carbon or equivalent filters certified as per NSF/ANSI standards, ensuring clean and safe drinking water. A clearly visible LED-based indicator system should be provided to indicate filter status and power connection. The integrated drain tray must be anti-splash and designed to prevent clogging. Electrical power requirements for the unit shall be 230V ±10%, 50 Hz, single phase, with maximum power consumption not exceeding 0.5 kW. Installation will include firm anchoring of the unit on a level surface with proper connection to water supply lines and drainage systems, and electrical connection with MCB protection and grounding as per safety norms. The product offered must be from a manufacturer with CE, RoHS, and ISO 9001 certifications and must comply with all relevant BIS/NSF/ANSI hygiene and safety standards. The bidder shall provide all necessary documentation, including product datasheets, operation manuals, warranty certificates, and details of service support centers. A minimum of one year of onsite comprehensive warranty shall be provided by the supplier, and bidders must also quote separately for Annual Maintenance Contracts (AMC) post-warranty. The supplier shall ensure availability of genuine spare parts for at least five years from the date of installation.(Make - OASIS/Voltas or Equivalent) |
| 95 | Supply & Erection of factory fabricated & wired metal clad dust and vermin proof mounting, M.S Channel Base with botom and top cable entreis Electrical control panel with TPN ACB (65KA, 4 Pole Elect draw out Micor Processer Release IPR2) and TPN MCCB's (four Pole 36 KA with thermal magnatic release) switches and instrument chamber etc. complete in all respect. The instrument chamber shall be separate and shall comprise of flush type/digital ammeter Voltmeter, Selector switches for ammeter and Voltmeter, instrument fuses current transformer etc. The Board shall have suitable capacity electrolytic aluminium busbars as per IS8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches enty boxes shall be complete with suitable cable end boxes reverse. The job includes the grounting of the board as per directions of Architect-in-Charge. All out goings of 100 Amp. and above will be provided with Amp. Metre, curent transformer and selector switches etc. and insurment fuse The switch board shall be fabicated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubical type switch board shall be of cat A & B only. STREET LIGHT FEEDER-1 (OUTDOOR TYPE) IP 65 Incoming : One (1) No 63 Amp. 4P MCCB of 25KA Breaking capacity Metering : One (1) No. Sets Multifunction Meter each incoming One (1) No. of Phase Indication Lamp each incoming Bus Bar : One (1) No. 100 Amp.TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 2 No. 32 Amp DP MCB. (10 KA) 15 No. 16 Amp DP MCB. (10 KA) Space for spare-2 Nos. Panel described as above |
| 96 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. Details of cost for one each |
| 97 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required |
| 98 | Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories , and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. (but with charcoal or coke and salt) as required. |
| 99 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 100 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
| 101 | Providing and fixing 25 mm x 5 mm G.I. strip on surface or in recess for connections etc. as required. |
| 102 | Laying of one number PVC insulated and PVC sheathed / XLPE power Cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Up to 35 sq.mm. |
| 103 | Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, rotective covering and refilling the trench etc as required Up to 35 sq.mm. |
| 104 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required Up to 35 sq.mm. |
| 105 | Supply of following siz of 1.1KV grade multicore aluminium conductor XLPE insulated and PVC shethed armoured cable as per IS 7098:1988 with up to date amendment 3.5 x 25 sq.mm. |
| 106 | 4 x 16 sq.mm |
| 107 | 3 x 6 sq.mm, |
| 108 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for following size of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required. 2 X 6 sq. mm (19mm) |
| 109 | 3½ X 25 sq. mm (28mm) |
| 110 | 4 X 16 sq. mm (28mm) |
| 111 | Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required 100 mm dia |
| 112 | Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 100mm dia |
| 113 | 150 mm dia |
| 114 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 115 | Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks ofclass designation 7.5 |
| 116 | Providing, fabricating, and erecting 5.0 m high by (K-Lite, Twinkle,Philips or approved equivalent) decorative street lighting pole fabricated from high-grade steel sections, designed as per bracket configuration and loading requirements. Pole sections shall be welded using special V-groove technique with high-end MIG welding process by certified welders to ensure structural strength and durability. The pole shall be provided with an inbuilt control box and prewired control gear tray complete with MCB and terminal connectors for loop-in/loop-out arrangement. Base plate shall be manufactured from steel grade E250 and supplied with foundation bolts of grade 4.6. Base plate holes shall be elongated for proper alignment during installation. The complete pole shall be factory treated and finished with approved anti-corrosive coating and paint finish suitable for outdoor applications. The pole shall be CE certified/conformity marked and supplied complete with all accessories, erection, alignment, installation, testing, and commissioning as per approved drawings and specifications by the Architect in charge. |
| 117 | Providing and fixing decorative post-top LED luminaire ((K-Lite, Twinkle,Philips or approved equivalent)) with 50W LED module, suitable for mounting on Ø50 mm OD pipe. Luminaire housing shall be made of gravity die-cast aluminium with decorative top cover, supporting arm, and mounting base complete with textured/translucent acrylic diffuser for symmetrical light distribution (60° beam angle). The luminaire shall have IP65 protection, IK09 impact resistance, and powder-coated finish in approved RAL shades. All external fasteners shall be of stainless steel. Fixture shall be available in 2700K/3000K/4000K/5700K CCT with CRI >70 and LED life of minimum 60,000 burning hours. The fitting shall be complete with prewired high-efficiency LED driver suitable for 240V, 50Hz single-phase AC supply, having PF >0.95, THD <10%, driver efficiency >88%, and surge protection up to 6kV. Luminaire size shall be approximately 325mm × 325mm × 545mm height, complete with all accessories, installation, testing, and commissioning as per approved specifications and direction of Architect-in-Charge. |
| 118 | Providing and fixing K-Lite recessed wall/stair LED luminaire (K-Lite, Twinkle,Philips or approved equivalent) complete with 12W LED module and forward asymmetrical light distribution, suitable for wall and stair illumination applications. The luminaire shall be manufactured from pressure die-cast aluminium alloy with high corrosion resistance and provided with non-corrosive A2 grade stainless steel fasteners. The fixture shall be supplied with ABS plastic installation housing for recessed mounting in wall/stair and clear acrylic diffuser for uniform light output. The luminaire shall have single cable entry through M10 cable gland, IP65 ingress protection, and IK09 impact resistance suitable for outdoor applications. The luminaire shall be finished with pure polyester powder coating in approved RAL shades including RAL 9004 Black, RAL 9007 Grey Aluminium, RAL 7016 Anthracite Grey, or Graphite Grey. Fixture shall be available in 2700K/3000K/4000K/5700K CCT with CRI >80 and LED life of minimum 60,000 operating hours. The fitting shall be prewired with high-efficiency LED driver suitable for 240V, 50Hz single-phase AC supply with driver efficiency >85%, power factor >0.90, THD <10%, and surge protection up to 2.5kV. Luminaire dimensions shall be approximately 255 mm (L) × 87 mm (W) × 76 mm (H) with recessed cut-out dimensions of approximately 240 mm (L) × 83 mm (W) × 70 mm (H). The product shall be CE & BIS certified and tested in NABL accredited laboratory, complete with all accessories, installation, testing, and commissioning as per approved specifications and direction of Architect-in-Charge. |
| 119 | Providing and fixing K-Lite LED bollard luminaire (K-Lite, Twinkle,Philips or approved equivalent) suitable for surface-mounted outdoor landscape lighting applications, complete with 12W LED module and symmetrical light distribution. The luminaire shall be manufactured from square extruded aluminium tube with aluminium components and non-corrosive stainless steel fasteners, complete with inner toughened glass and bespoke laser-cut design pattern as approved. The luminaire shall be provided with pressure die-cast aluminium mounting plate of size 150 mm × 150 mm × 4 mm thick, having 3 elongated holes of size 20 mm × 12 mm suitable for M10 foundation bolts at 90 mm PCD, along with central cable entry hole of 35 mm dia for concealed wiring arrangement. The mounting plate and foundation bolts shall ensure rigid fixing and proper grouting into foundation. The fixture shall have IP65 ingress protection and IK10 impact resistance. Housing shall be finished with pure polyester powder coating in approved RAL shades including RAL 9004 Black, RAL 9007 Grey Aluminium, RAL 7016 Anthracite Grey, or Graphite Grey. The luminaire shall be available in 2700K/3000K/4000K/6500K CCT with CRI ≥90 and LED life of minimum 60,000 operating hours. The fitting shall be prewired with LED driver suitable for 240V, 50Hz single-phase AC supply with driver efficiency >80%, power factor >0.95, THD <10%, and surge protection up to 4kV. Overall luminaire dimensions shall be approximately 150 mm × 150 mm × 1000 mm height. The product shall be CE & BIS certified and tested in NABL accredited laboratory, complete with all accessories, installation, testing, and commissioning as per approved specifications and direction of Engineer-in-Charge |
| 120 | Providing and fixing K-Lite recessed in-ground LED luminaire (K-Lite, Twinkle,Philips or approved equivalent) complete with 8W LED module and asymmetrical beam angle of 35° × 45°. The luminaire shall comprise pressure die-cast aluminium housing with SS 316 grade stainless steel top ring and 8 mm thick clear toughened glass. Fixture shall be supplied with ABS plastic installation housing for recessed ground mounting. The luminaire shall have single cable entry through M10 cable gland, with all external screws made of stainless steel. The fitting shall have IP67 ingress protection and IK08 mechanical impact resistance. Fixture shall be available in 2700K/3000K/4000K/5700K CCT with CRI >80 and LED life of minimum 60,000 operating hours. The luminaire shall be prewired with LED driver suitable for 240V, 50Hz single-phase AC supply. Overall luminaire size shall be approximately 116 mm dia × 153 mm height. The product shall be CE & BIS certified and tested in NABL accredited laboratory, complete with all accessories, installation, testing, and commissioning as per approved specifications and direction of Architect-in-Charge. |
| 121 | Providing and fixing Linear recessed in-ground wall grazer LED luminaire (K-Lite, Twinkle,Philips or approved equivalent), suitable for floor-mounted outdoor applications, complete with 24W LED system and 100° beam angle. The luminaire shall be manufactured from high corrosion-resistant extruded aluminium alloy (6063) with SS 316 grade stainless steel top plate and non-corrosive stainless steel external fasteners. The fixture shall be provided with 6 mm thick translucent toughened glass and powder-coated aluminium profile installation housing for preparing recessed ground opening. The luminaire shall have IP67 ingress protection and IK05 impact resistance suitable for outdoor use. The fitting shall be available in 2700K/3000K/4000K/5700K CCT with CRI >80. The luminaire shall operate on constant voltage 24V DC non-integral power supply for enhanced operational safety. Luminaire dimensions shall be approximately 1025 mm (L) × 68 mm (W) × 83 mm (H) with cut-out dimensions of approximately 1015 mm (L) × 68 mm (W) × 80 mm (H). The product shall be CE & BIS certified and tested in NABL accredited laboratory, complete with all accessories, drivers, installation, testing, and commissioning as per approved specifications and direction of Architect-in-Charge. |
| 122 | Providing and fixing K-Lite recessed in-ground Pathway LED luminaire “In-Ground – One Way” (Make-K-Lite, Twinkle,Philips or approved equivalent) complete with 9W LED module and 1-way light distribution suitable for outdoor landscape applications. The luminaire shall be manufactured from pressure die-cast aluminium housing with SS 316 grade stainless steel top ring and translucent polycarbonate diffuser. The fixture shall be supplied with ABS plastic installation housing for recessed ground mounting and single cable entry through M10 cable gland. All external screws and fasteners shall be of stainless steel. The luminaire shall have IP67 ingress protection and IK09 impact resistance suitable for exterior applications. The fitting shall be available in 2700K/3000K/4000K/6500K CCT with CRI ≥90 and LED life of minimum 60,000 operating hours. The luminaire shall be prewired with LED driver suitable for operation on 240V, 50Hz single-phase AC supply with driver efficiency >80%, power factor >0.90, THD <10%, and surge protection up to 2kV. |
| 123 | Providing and fixing of compact LED spotlight luminaire (Make-K-Lite, Twinkle,Philips or approved equivalent) suitable for spike-mounted outdoor landscape lighting applications, complete with 12W LED module and symmetrical light distribution. The luminaire shall be manufactured from extruded aluminium (grade 6063) with pressure die-cast aluminium top cover and non-corrosive stainless steel external fasteners. The fixture shall be provided with 4 mm thick clear toughened glass and black polypropylene mounting spike suitable for surface/spike mounting applications. The luminaire shall have IP65 ingress protection and IK08 impact resistance suitable for outdoor use. The housing shall be finished with pure polyester powder coating in approved RAL shades including RAL 9004 Black, RAL 9007 Grey Aluminium, RAL 7016 Anthracite Grey, or Graphite Grey. The fitting shall be available in 2700K/3000K/4000K/6500K CCT with CRI ≥90 and LED life of minimum 60,000 operating hours.The luminaire shall be prewired with LED driver suitable for operation on 240V, 50Hz single-phase AC supply with driver efficiency >80%, power factor >0.90, THD <10%, and surge protection up to 3kV. |
| 124 | Providing and fixing of LED Stix luminaire (Make-K-Lite, Twinkle,Philips or approved equivalent) suitable for surface-mounted or spike-mounted outdoor landscape lighting applications, complete with 6W LED module and symmetrical light distribution. The luminaire shall be manufactured from SS 304 grade stainless steel pipe with pressure die-cast aluminium pyro top and non-corrosive stainless steel fasteners. The fixture shall be provided with clear acrylic diffuser and polypropylene spike/base mounting arrangement or die-cast aluminium mounting base of 60 mm diameter with fixing holes suitable for coach screws and cable entry provision. The housing shall be finished with pure polyester powder coating in approved RAL shades including RAL 9004 Black, RAL 9007 Grey Aluminium, RAL 7016 Anthracite Grey, or Graphite Grey. The luminaire shall be available in 2700K/3000K/4000K/5700K CCT with CRI >80. The fitting shall operate on constant voltage 24V DC non-integral power supply for enhanced operational safety and shall be supplied with suitable external DC-to-DC converter complete with IP-rated junction box. |
| 125 | Providing and fixing of LED spotlight luminaire (Make-K-Lite, Twinkle,Philips or approved equivalent) complete with 60W LED module, suitable for outdoor architectural and landscape lighting applications. The luminaire shall be manufactured from pressure die-cast aluminium housing with high corrosion resistance and non-corrosive stainless steel fasteners, complete with clear tempered glass and adjustable mounting bracket for precise aiming and focusing. The fixture shall have 40° optics (15°, 25°, and other beam options available on request) with CRI >80 and colour temperature of 3000K. The luminaire housing shall be finished with powder coating in RAL 9005 Jet Black or approved shade suitable for exterior applications. The luminaire shall be prewired with LED driver suitable for operation on 240V, 50Hz single-phase AC supply and provided with cable entry arrangement for through-wiring of mains supply cable. |
| 126 | Supply of 150W BIS Approved Potted Driver of IP 66/67 rating made of extruded aluminium to make it more thermal efficient, Led Driver should have Operating input voltage range: 90-305VAC, PF > 0.90 and must have safety operation range form 90V - 176Vac. Led driver must have Case temperature i.e. Tc > 90°C. Driver should be compatible with Stix and as approved by Architect in charge |
| 127 | Supply, Installation, Testing and Commissioning of IP Connectors required for connecting all the Luminaire as well as drivers, KL-8276, IP67 End Cap Male & Female Connectors - 2P, KL-8278, IP67 Leader Cable and Two Way - 3 Pin IP68 Connector KL-8160 Dimension: Ø20 x 66. as approved by Architect in charge |
| 128 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole |
| 129 | Supplying,installation,testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply |
| 130 | Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required 32 mm dia |
| 131 | Boring with hydraulic piling rigs with power units, providing and installing cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete, to carry a safe working load notless than specified, excluding the cost of steel reinforcement but including the cost of boring with bentonite solution and the length of the pile to beembedded in pile cap etc. all complete. (Length of pile for payment shall be measured upto to the bottom of pile cap) : |
| 132 | Note: 1. Initial and Routine Load Test shall not be carried out by Dynamic method of testing. Note: 2. Testing agency shall submit the design of loading platform for the approval of Engineer-in-charge. Initial test (Test Load 2.5 times the Safe capacity |
| 133 | Routine test (Test Load 1.5 times the Safe capacity) |
| 134 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.Cement mortar 1:4 (1 cement :4 coarse sand) |
| 135 | 1Extra for forming cavity 5 cm to 11.5 cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. ties 300 mm long of 25x3 mm section at not less than 3 ties per sqm as per approved design. |
| 136 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) :Design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. Red sand stone - exposed face fine dressed with rough backing . 40mm thick |
| 137 | Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required. |
| 138 | Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases. |
| 139 | Supplying, designing, fabricating, transporting, hoisting and fixing in position mural works in good quality of 100-200 mm Sandstone, of desired shade and multistone insertion of approved thickness (Marble/Granite/Italian of any shade etc.) and 6-10mm powder coated MS sheet in various elements for all levels. Stone shall be free from cracks, lines stains and even in shade for each element. The stone shall be fine grained and reddish or buff-colored (locally available). The work shall be carried out as per attached drawings with different process of i.e carving (manual/ by machine), ornamental work, traditional work, figure work (any type, any size), CNC cutting, moulding, etching, buffing and polishing. The carving and molding work shall be of very good quality. The work to be fixed in line, level and plumb in all respect with the use of brass clamps, pins, (to be paid separetely) dowels, cement slurry with matching pigment and Epoxy of Akemi Germany, Ardex Endura, MYK laticrete , design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. |
| 140 | Design, Fabrication, Supply, Installation, Testing and Commissioning of Single leaf Electrically operated Sliding gate suitable for a clear opening of 6.0 mtrs clear width and 1.8mtr clear height, over all width of 8.0 mtr min as per following specifications suitable for movement on track of MS Solid bright bar fixed on C channel i/c complete civil works for installation of gates and all associated works etc. complete as required. a. Outer main frame will be M.S rectangular/square section of size 100X100X3.0 mm thickness. b. Vertical and horizontal support pipe will be M.S rectangular section of size 100X50X3.0 mm thickness. c.Cross supports for wheel will be of M.S rectangular section with suitable size and thickenss. d. Top supports will be M.S rectangular section of suitable size . e. M.S wheels of 125 mm dia/suitable size and design with double ball bearing, self lubricated bearings (Make SKF/NBC) f. Shaft of wheels and bracket as per site requirement g. Coupling arrangement as required at site. h. Double railing of suitable size with hole fast and 25 mm dia solid bright bar. i.Drive unit with suitable capacity 3 Phase motor of minimum 1 HP with suitable gear assembly as per site requirement. Limit switches/sensors etc.. control panel for operation, control wires of suitable size between drive unit and control panel including Additional three station push button for operaton of opening and closing. j. Gate shall be fabricated as per the specifications and Painting with one coat of epoxy primer and two coats of polyurethane spray paint of approved colour and make etc.. complete as required. k. M.S angle of size 50X50X5 SWG in M.S U channel of size 100mmX50mmX5 SEG i/c cutting of bituminous/concrete road, fixingof track with concrete, all electrcial necesaary works and making good the same as per site condition as per design adn drawing approved by Architect in charge. |
| 141 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 142 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 143 | Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade,design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. (make Metaguise/Citadel/ Woodform Architectural or equivalent) Please Enable Macros to View BoQ information |
| 144 | Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade,design and drawing to be approved by the Architect in charge by the means of shop drawing and sample preparation by the contractor. (make Metaguise/Citadel/ Woodform Architectural or equivalent) Please Enable Macros to View BoQ information |