|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. DSR No. 2.6.1 including all labour, material, T&P etc complete but excluding GST. |
| 2 | 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources). DSR No. 4.1.8 including all labour, material, T&P etc complete but excluding GST. |
| 3 | 1:2:4 (1 Cement : 2 coarse sand (zone-lll) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) DSR-4.1.4 including all labour, material, T&P etc complete but excluding GST. |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand). DSR No. 6.1.2 including all labour, material, T&P etc complete but excluding GST. |
| 5 | Cement mortar 1:2 (1 cement : 2 coarse sand).dsr-3.7 including all labour, material, T&P etc complete but excluding GST. |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand). DSR No. 6.4.1 including all labour, material, T&P etc complete but excluding GST. |
| 7 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). DSR No. 5.2.2 including all labour, material, T&P etc complete but excluding GST. |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR No. 5.22A.6 including all labour, material, T&P etc complete but excluding GST. |
| 9 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) DSR No. 13.4.1 including all labour, material, T&P etc complete but excluding GST. |
| 10 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to 1.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 1000x1000 mm. DSR No. 11.46.1 including all labour, material, T&P etc complete but excluding GST. |
| 11 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part 1) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 150 SUB 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws dsr-9.21.2 including all labour, material, T&P etc complete but excluding GST. |
| 12 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats. DSR No. 13.83.2 including all labour, material, T&P etc complete but excluding GST. |
| 13 | Providing and fixing chlorinated polyviny chlride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one stoep CVPC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge concealed work including cutting chases and making good the wall etc. 25 mm nominal outer dia pipes DSR no. 18.7.3 including all labour, material, T&P etc complete but excluding GST. |
| 14 | Providing and fixing chlorinated polyviny chlride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing This includes jointing of pipes & fittings with one stoep CVPC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer in charge concealed work including cutting chases and making good the wall etc. 20 mm nominal outer dia pipes DSR no. 18.7.2 including all labour, material, T&P etc complete but excluding GST. |
| 15 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: 17.68.1 White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend DSR No. 17.68 including all labour, material, T&P etc complete but excluding GST. |
| 16 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps DSR No. 17.7.2 including all labour, material, T&P etc complete but excluding GST. |
| 17 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia DSR No. 17.28.1 including all labour, material, T&P etc complete but excluding GST. |
| 18 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. DSR No. 17.31 including all labour, material, T&P etc complete but excluding GST. |
| 19 | Providing and placing on terrace (at all floor levels) Polyethylene water storage tank ISI 12701 maked with cover and suitable locking arrangement and making necessary holes for intel outlet and overflow pipes but without fittings and the base support for tank. S.I. No. 18.48 including all labour, material, T&P etc complete but excluding GST. |
| 20 | Providing and fixnig CP brass long nose bib cock of approved quality conforming to IS standard and weighting not less than 810 gms. S.I. No. 18.50.1 including all labour, material, T&P etc complete but excluding GST. |
| 21 | Supply and fixing of 10 cm internal dia P.V.C. down pipe everest or charminar make or any standard company complete with bands with door at top and plain at bottom and grating and including supply of necessary M.S. clamps 2.5 cm x 3 mm fixed to walls with and including supply of 10 cm long 6 mm dia Nuts and bolts including washers of required size. all materials, labour and T&P etc. required for proper completion of the work and also including repair of plaster, pointing etc. if damaged during fixing of the pipe. including all labour, material, T&P etc complete but excluding GST. Please Enable Macros to View BoQ information |