|
| 1 | Periodical maintenance and inspection/checking of following size /capacity of DG sets and ensuring smooth functioning of DG sets and replacements of unsv parts of DG sets of following capacities : - Note:- Spare parts required shall be measured and paid separately . |
| 2 | 15 KVA DG SET |
| 3 | 20 KVA DG SET |
| 4 | 30 KVA DG SET |
| 5 | 35 /40KVA DG SET |
| 6 | 62.5 KVA DG SET |
| 7 | 75 KVA DG SET |
| 8 | 100 KVA DG SET |
| 9 | 160 KVA DG SET |
| 10 | 250 KVA DG SET |
| 11 | 320 KVA DG SET |
| 12 | Supply and fixing in Replacement bypass filter element with O ring of Kirloskar /Crompton greeves/Mahindra DG Sets as required at site as per make and model for the following capacities of DG Sets :- |
| 13 | 15 KVA DG SET |
| 14 | 20 KVA DG SET |
| 15 | 30 KVA DG SET |
| 16 | 35/40 KVA DG SET |
| 17 | 62.5 KVA DG SET |
| 18 | 75 KVA DG SET |
| 19 | 100 KVA DG SET |
| 20 | 160 KVA DG SET |
| 21 | 250 KVA DG SET |
| 22 | 320 KVA DG SET |
| 23 | Supply and fixing in Replacement luberication oil filter element with 'O' ring of Kirloskar /Crompton greeves/Mahindra DG Sets as required at site as per make and model for following capacities of DG Sets :- |
| 24 | 15 KVA DG SET |
| 25 | 20 KVA DG SET |
| 26 | 30 KVA DG SET |
| 27 | 35 /40KVA DG SET |
| 28 | 62.5 KVA DG SET |
| 29 | 75 KVA DG SET |
| 30 | 100 KVA DG SET |
| 31 | 160 KVA DG SET |
| 32 | 250 KVA DG SET |
| 33 | 320 KVA DG SET |
| 34 | Supply and fixing in Replacement Air filter element inner and outer as required filter element at site with 'O' ring of Kirloskar /Crompton greeves/Mahindra DG Sets as required at site as per make and model for following capacities of DG Sets :- |
| 35 | 15 KVA DG SET |
| 36 | 20 KVA DG SET |
| 37 | 30 KVA DG SET |
| 38 | 35/40 KVA DG SET |
| 39 | 62.5 KVA DG SET |
| 40 | 75 KVA DG SET |
| 41 | 100 KVA DG SET |
| 42 | 160 KVA DG SET |
| 43 | 250 KVA DG SET |
| 44 | 320 KVA DG SET |
| 45 | Supply and fixing in Replacement fuel filter element with 'O' ring of Kirloskar /Crompton greeves/Mahindra DG Sets as required at site as per make and model for following capacities of DG Sets :- |
| 46 | 15 KVA DG SET |
| 47 | 20 KVA DG SET |
| 48 | 30 KVA DG SET |
| 49 | 35/40 KVA DG SET |
| 50 | 62.5 KVA DG SET |
| 51 | 75 KVA DG SET |
| 52 | 100 KVA DG SET |
| 53 | 160 KVA DG SET |
| 54 | 250 KVA DG SET |
| 55 | 320 KVA DG SET |
| 56 | Supply and fixing in Replacement of Fan belt of Kirloskar /Crompton greeves/Mahindra DG Sets as per given sample for10 KVA to 62.5 KVA DG Sets. |
| 57 | Supply and fixing in Replacement of Fan belt of Kirloskar /Crompton greeves/Mahindra DG Sets as per given sample for100 KVA to 200 KVA DG Sets. |
| 58 | Supply and fixing in Replacement of Fan belt of Kirloskar /Crompton greeves/Mahindra DG Sets as per given sample for1 320 KVA DG Sets. |
| 59 | Taking of FIP from the Engine and Calibration of FIP (Fuel Injection Pump) 35 to 160 KVA DG Set Make : Ashok Leyland /Kirloskar / Cummins/Crompton Greaves Jyoti at admissible pressure including minor spares etc testing and refitting all as specified and directed. |
| 60 | Taking of FIP from the Engine and Calibration of FIP (Fuel Injection Pump) 250 to 320 KVA DG Set Make : Ashok Leyland /Kirloskar / Cummins/Crompton Greaves Jyoti at admissible pressure including minor spares etc testing and refitting all as specified and directed. |
| 61 | Supply and fixing in Replacement distilled water to be filled in batteries ,complete all as specified and directed by Engineer-in-charge. |
| 62 | Supply and fixing in Replacement ignition switch with key in repair for DG sets of any capacities, complete all as specified and directed by Engineer-in-charge. |
| 63 | Material & Labour for replacement of battery cable of size 40 sqmm PVC insulated multi stranded copper conductor single core cable with necessary lugs, complete all as specified and directed by Engineer-in-charge. |
| 64 | Supply and filling in Replacement top up coolent for DG set radiator |
| 65 | Supply and fixing in Replacement Water temperature gauge for 320 KVA DG set complete all as specified and as directed. |
| 66 | Supply and fixing in Replacement Water temperature gauge for 250 KVA DG set complete all as specified and as directed. |
| 67 | Supply and fixing in Replacement Water temperature gauge for 160 KVA DG set complete all as specified and as directed. |
| 68 | Supply and fixing in Replacement oil pressure gauge assembly for 40 KVA DG set complete all as specified and as directed. |
| 69 | Supply and fixing in Replacement oil temperature gauge for 160 KVA DG set complete all as specified and as directed. |
| 70 | Supply and fixing in Replacement cable for Techno meter for 35/40 KVA DG set complete all as specified and as directed. |
| 71 | Supply and fixing in Replacement Techno meter assembly for 160/320 KVA DG set complete all as specified and as directed. |
| 72 | Supply and fixing in Replacement flexible braided hydraulic hose 5/8\\" dia x 600 mm length including suitable check nuts & washers, complete all as specified and directed by Engineer-in-charge. |
| 73 | Supply and fixing in Replacement RPM metre with cable (0-3000 RPM),, complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply and filling in Replacement lube oil 20 W - 40 for Top up and filling up the oil in the sump after completely flushing the old oil out of the tank and cleaning of the tank for fresh filling, complete all as specified and directed by Engineer-in-charge. Make : Castrol/Power Supreme |
| 75 | Supply and filling in Replacement lube oil SAE 15 W - 40 for Top up and filling up the oil in the sump after completely flushing the old oil out of the tank and cleaning of the tank for fresh filling, complete all as specified and directed by Engineer-in-charge. Make : Castrol/Power Supreme |
| 76 | Supply and filling in Replacement lube oil SAE 15 W - 40 for Top up and filling up the oil in the sump after completely flushing the old oil out of the tank and cleaning of the tank for fresh filling, complete all as specified and directed by Engineer-in-charge. |
| 77 | Supply and fixing in Replacement complete 12 V 180 AMPH maintenance free battery and initial charging complete including inbuilt charger including required electrolyte /distilled water etc and fixing as required at site to the concerned DG Set, complete all as specified and directed by Engineer-in-charge. |
| 78 | Supply and fixing in Replacement of self starter assembly for DG set of 40 KVA 12 volts DC including, complete fixing and testing, complete all as specified and directed by Engineer-in-charge. Make:-Lucas-TVS |
| 79 | Supply and fixing in Replacement of self starter assembly for DG set of 160 KVA 12 volts DC including, complete fixing and testing, complete all as specified and directed by Engineer-in-charge. Make:-Lucas-TVS |
| 80 | Supply and fixing in Replacement of self starter assembly for DG set of 200 KVA to 320 KVA, 24 volts DC including, complete fixing and testing, complete all as specified and directed by Engineer-in-charge. Make:-Lucas-TVS |
| 81 | Supply and fixing in Replacement Rubber hose set for DG set radiator by replacing the unserviceable hose set ,for 40 KVA DG set complete all as specified as directed by Engineer-in-charge. |
| 82 | Supply and fixing in Replacement PLC system for DG sets of 35/40 KVA capacities , complete all as specified as directed by Engineer-in-charge. |
| 83 | Supply and fixing in Replacement PLC system for DG sets of 62.5 KVA capacities , complete all as specified as directed by Engineer-in-charge. |
| 84 | Supply and fixing in Replacement PLC system for DG sets of 160 KVA capacities , complete all as specified as directed by Engineer-in-charge. |
| 85 | Supply and fixing in Replacement PLC system for DG sets of 320 KVA capacities , complete all as specified as directed by Engineer-in-charge. |
| 86 | Taking out the radiator assembly from DG Set of capacity 40 KVA to 160 KVA for cleaning/servicing and cleaning the radiator externally/internally and reinstallation after carrying out the job work:- |
| 87 | (a) Externel Cleaning :- Removel of light deposits by using low pressure hot stream jet with addition of detergent and incase stuuborn deposits experienced the radiator to be immersed in a heated Alkali degreasent solution for 30 minutes and then washing off with hot water hose complete all as specified and directed |
| 88 | (b) Internel Cleaning:-Internel cleaning be done by prepration of solution of inhivited acid solvent with fresh water and circulation of acid solution in radiator for severel times descaling the acid solution by adding 700 gm of soda with 20 ltrs boiling water .Refining be done after pressure check complete all as specified and directed. |
| 89 | Supply and fixing in Replacement of turbo charger Suitable for 10 KVA to 160 KVA, complete all as specified as directed by Engineer-in-charge. Make:- Holest or equivalent as approved. |
| 90 | Supply and fixing in Replacement of turbo charger,Suitable for 200 KVA to 320 KVA complete all as specified as directed by Engineer-in-charge. Make:- Holest or equivalent as approved. |
| 91 | Taking out the radiator assembly from DG Set of capacity 200 KVA to 320 KVA for cleaning/servicing and cleaning the radiator externally/internally and reinstallation after carrying out the job work:- |
| 92 | (a) Externel Cleaning :- Removel of light deposits by using low pressure hot stream jet with addition of detergent and incase stuuborn deposits experienced the radiator to be immersed in a heated Alkali degreasent solution for 30 minutes and then washing off with hot water hose complete all as specified and directed |
| 93 | (b) Internel Cleaning:-Internel cleaning be done by prepration of solution of inhivited acid solvent with fresh water and circulation of acid solution in radiator for severel times descaling the acid solution by adding 700 gm of soda with 20 ltrs boiling water .Refining be done after pressure check complete all as specified and directed. |
| 94 | Inspection/checking of AMF panel of DG set of capacity 40 KVA to 100 KVA installed at various installations of any make and shape and rectify the defects, replacement of unserviceable part as required at site and cleaning of AMF panel as detecting during inspection or pointed out by users/department and carry out maintenance , complete all as specified as directed by Engineer-in-charge. Note:- Spare parts required shall be measured and paid separately . |
| 95 | Inspection/checking of AMF panel of DG set of capacity 160 KVA to 320 KVA installed at various installations of any make and shape and rectify the defects, replacement of unserviceable part as required at site and cleaning of AMF panel as detecting during inspection or pointed out by users/department and carry out maintenance , complete all as specified as directed by Engineer-in-charge. Note:- Spare parts required shall be measured and paid separately . |
| 96 | Supply and fixing in Replacement 4 Pole power contactor with AC coil 160 Amps, 3 phase 415 volt 50 HZ suitable for AMF panels complete all as specified as directed by Engr-in-Charge Make:-Havells model No-IHPAC065500 or equivalent make given in Appx \\"B\\" |
| 97 | Supply and fixing in Replacement engine start relay 12 volt DC suitable for AMF panels Complete all as specified as directed by Engr-in-Charge Make:- Eagle Man/PIC |
| 98 | Supply and fixing in Replacement frequency meter 45 to 55 HZ AC 415 volt of size Sqmm suitable for AMF panels complete all as specified as directed by Engineer-in-Charge. Make:- AE/Premier. |
| 99 | Supply and fixing in Replacement selector switch for volt/ampere metre 415 volt four stage suitable for AMF panels Complete all as specified as directed by Engr-in-Charge Make:- L&T/CONCORD/KAYCEE/C&S |
| 100 | Supply and fixing in Replacement cranking relay 12/24 volts DC 8/11 stage suitable for AMF panels complete all as specified as directed by Engineer-in-Charge. Make:- Eagle Man or equivalent as approved |
| 101 | Supply and fixing in Replacement indicator lamp assembly LED type with red/green/blue for phases R,Y,B suitable for AMF panels complete all as specified as directed by Engineer-in-Charge. |
| 102 | Supply and fixing MCCB in replacement of 100 Amps, 3 pole, 415 volts, 50 HZ, rupturing capacity 16KA, connection with proper size of thimbles complete including taking out defective/ unserviceable MCCB all as specified and directed. |
| 103 | Supply and fix MCCB in replacement with thermal magnetic release adustable type DN2-250D, 250A, 415 Volts 4 pole 36KA all as specified & directed. |
| 104 | Supply and fix MCCB in replacement with thermal magnetic release adustable type DN3-400D, 400A, 415 Volts 4 pole 36KA all as specified & directed. |
| 105 | Supply and fixing in replacement of on load change over switch 200 Amps 4 Pole 415 Volts housed in sheet metal enclosure complete all as specified and directed by Engineer-in-Charge. Make-Havelles/standared/Indo Asian. |
| 106 | Supply and fixing in replacement of on load change over switch 100 Amps 4 Pole 415 Volts housed in sheet metal enclosure complete all as specified and directed by Engineer-in-Charge. Make-Havelles/standared/Indo Asian. |
| 107 | Supply and fixing in replacement off load change over switch 200 Amps 4 Pole 415 Volts complete all as specified and directed by Engineer-in-Charge. Make-Havelles/standared/Indo Asian. |
| 108 | Supply and fixing in replacement of off load change over switch 100 Amps 4 Pole 415 Volts complete all as specified and directed by Engineer-in-Charge. Make-Havelles/standared/Indo Asian. |
| 109 | Supply and fixing of battery12 V, 150 AH complete all as specified and directed. Make :- Exide Xpress / Mico or equivalent. |
| 110 | Supply and fixing of battery12 V, 100 AH complete all as specified and directed. Make :- Exide Xpress / Mico or equivalent. |
| 111 | M/L for Repairs to out door LT panel including taking down for repair as follows :-( a ) Supply and fixing of MS sheet 16 SWG( 1.6 mm ) and fabrication of back side cover of LT panel including cutting to required size and shape fixing in position by bending, welding all as required for proper functioning of LT panel shutters including two coats of coats of synthetic enamel paint over a coat of red oxide.(b ) Supply and fixing of hinges , tee type stove enamelled black medium weight , cold rolled and mild steel 30 mm size and fixed door shutters ( c ) Supply and fixing of locking arrangement with MS sliding door bolts hasp and suitable for use with pad lock of size 200 mm( d ) Mild steel work conforming to Fe-410-0 or Fe-310-0 as in angle iron frame work , cut to size including bending and welding angles as necessary and re -fixing of MS sheet of panel including a shop coat of red oxide prime |
| 112 | Supply and fixing of copper thimbles using crimping tool for electrical connections with cable and connecting with suitable size of nuts / bolts and washers of size 120 sqmm to 185 sqmm LT cable size. |
| 113 | Supply and fixing of copper thimbles using crimping tool for electrical connections with cable and connecting with suitable size of nuts / bolts and washers of size 25 sqmm to 95 sqmm LT cable size. |
| 114 | Supply and fixing in replacement of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with standed aluminium conductor 4 core 16 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge. |
| 115 | All as per itme No 8 above but 4 core 25 Sqmm |
| 116 | All as per itme No 8 above but 4 core 50 Sqmm |
| 117 | All as per itme No 8 above but 4 core 70 Sqmm |
| 118 | All as per itme No 8 above but 4 core 150 Sqmm |
| 119 | All as per itme No 8 above but 4 core 240 Sqmm |
| 120 | Excavation in trenches in soft/loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for route of cable and getting out complete all as specified and as directed by the Engineer-in-Charge. |
| 121 | Returning, filling in soft/loose soil including spreading, leveling, watering and well ramming, in layers not exc 25 cm complete all as specified and as directed by the Engineer-in-Charge. |
| 122 | Removing of surplus soil to a distance not exc. 50 meter and depositing where directed at a level not exc.1.5 metre above the starting point complete all as specified and as directed by the Engineer-in-Charge. |
| 123 | M/&L for stone slab 40 to 50 mm thick rough dressed Jodhpur stone slab cover in trenches for protection of cable 25 to 30 cm wide and not less then 50 cm in length laid dry abutting each other with gap between adjacent slab not exceeding 10 mm over sand cushioning all as specified and directed by Engr-in-Charge. |
| 124 | supply and laying of Local tibba dry sand cushioning and cover (8 cm thick layer of sand before laying of cable and 15 cm thick layer of sand after laying of cable) for protection of cable, material and labour complete all as specified and as directed by Engineer-in-Charge. |
| 125 | Material and labour in repair for earthing complete with copper plate electrode 60cmx60cmx3.15mm thick, buried directly in ground, vertically to a dpeth not less than 2.25 mtr deep below ground level with top edge of the earth plate at depth not lss than 1.5 mtr below ground level earth plate surrounded by 15 cm thick and packed layers of charcoal, dust and common salt, earth lead copper strip 20 x 3 mm by means of bolts, nuts, check-nuts and wahsers of galvanised iron and thimbles and of earth wire protected by galvanised iron pipe light grade 40mm bore and water pipe 20mm bore GI medium grade with funnel and wire mesh complete 1:3:6 type C-1 using 20mm graded stone aggregate in lieu of CI cover and frame etc all as specified and directed. |
| 126 | Dismantling of self starter and remove of defected parts and replace suitable for DG set of 35 to 160 KVA and fixing the same including testing.(Defective spares part to be paid seprately) |
| 127 | Supply only Solenoid Switch |
| 128 | Supply only Armature |
| 129 | Supply only Field coil copper |
| 130 | Supply only Carbon Brush |
| 131 | S&F fuel pipe from filter to FIP with benzo bolt as per sample suitable for DG sets upto 110 KVA complete all as specified and directed. Make:- Kirloskar, Mico |
| 132 | S&F self Starter 12V as per sample suitable for DG set 12v operated. Make:- Kirloskar, Locus. |
| 133 | S&F copper strip of size 20 x3 mm as earth continuity conductor buried in ground or fixed to wall/floor/ground provided with porcelain insulators space no less than 0.5 mtrs complete all as specified and directed. |
| 134 | Routine maintenance of DG set of capacity 35 KVA to 320 KVA by carrying out the test check for belt tensioin,adjustment of valve clearance with clearance gap o 0.4 mm for both inlet and exhaust valve and adjustment of tapped with filer gauge,replacement of changing gear and Flywheel and oil,cleaning of injector/Nozzles and spray check,servicing of self starter by replacement of carbon bushes,Terminal wires including cleaning with vaccum cleaner to wipe out unwanted materials/dust from alternator and other minor repairs/servicing of Emgine complete all as specified and directed by Engineer-in-Charge. ( Make of engine Kirloskar/Greaves). |
| 135 | Supply and Fixing in Replacement of Voltage monitring Relay 415 Volt, 2 NO, NC 50 Hz suitable for AMF Pannel complete all as specified and directed by Engineer-in-Charge. |
| 136 | Supply and Fixing in Replacement Alternator AVR for following capacities of DG Sets Make- National/Kirloskar /Crompton greeves |
| 137 | 15 KVA To 75 KVA DG SET |
| 138 | 100 KVA To 200 KVA DG SET |
| 139 | 200 KVA To 400 KVA DG SET |
| 140 | Supply and fixing in Repalcement of on line Fuel Solenoid Switch 12 V DC |
| 141 | Supply and fixing in Repalcement of on line Fuel Solenoid Switch 24 V DC |
| 142 | Supply and fixing in Repalcement of Off line Fuel Solenoid Switch 12 V DC |
| 143 | Supply and fixing in Repalcement of Off line Fuel Solenoid Switch 24 V DC |
| 144 | Supply and fixing Procom Controller 6 Module 12 Volt & 24 Volt DC Complete all as specified and directed by Engineer-in-Charge. Make:- Procom/GE/STANDARD |
| 145 | Supply and fixing in Repalcement of Relay Card 2 plush 3 suitable for 12 V DC Complete all as specified and directed by Engineer-in-Charge |
| 146 | Supply and fixing in Repalcement of Relay Card 2 plush 3 suitable for 24 V DC Complete all as specified and directed by Engineer-in-Charge |
| 147 | Supply and fixing Battery Charger in AMF Panel Capacity 12 v 10 Amps with SMPS base Complete all as specified and directed by Engineer-in-Charge |
| 148 | Supply and fixing Battery Charger in AMF Panel Capacity 24 v 10 Amps with SMPS base Complete all as specified and directed by Engineer-in-Charge |
| 149 | Supply and Fixing in replacement Control Cable 6 Core 2.5 Sqmm Complete all as specified and directed by Engineer-in-Charge |
| 150 | Supply and fixing in replacement 12\\" Fuel Pipe 8mm Bore pressure 8 Kg /Cm Squire |
| 151 | Supply and fixing in replacement 24\\" Fuel Pipe 8mm Bore pressure 8 Kg Cm Squire |
| 152 | Supply and fixing in replacement 36\\" Fuel Pipe 8mm Bore pressure 8 Kg Cm Squire |
| 153 | Supply and fixing in replacement 48\\" Fuel Pipe 8mm Bore pressure 8 Kg Cm Squire |
| 154 | Supply and fixing in replacement 72\\" Fuel Pipe 8mm Bore pressure 8 Kg Cm Squire |
| 155 | S&F and testing in replacement of energy efficient LED street light fitting of 60 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed. |
| 156 | S&F and testing in replacement of energy efficient LED street light fitting of 70/72 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed. |
| 157 | S&F and testing in replacement of energy efficient LED street light fitting of 90 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed. |
| 158 | S&F and testing in replacement of energy efficient LED street light fitting of 120 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection complete all as specified and as directed. |
| 159 | S&F and testing in replacement of energy efficient LED Flood light fitting of 150 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection of complete all as specified and directed . |
| 160 | S&F and testing of energy efficient LED Flood light fitting of 200 watt pole mounting comprising a diecast aluminium houing with heat resistant toughened glass with frame IP 66 protection of complete all as specified and directed . |
| 161 | M&L for disconnecting electric connection and dismantling U/S LED driver form led light fittings and fixed new driver50/ 60 watt complete all as specified and as directed. |
| 162 | M&L for disconnecting electric connection and dismantling U/S LED driver form led light fittings and fixed new driver 70/72 watt complete all as specified and as directed. |
| 163 | M&L for disconnecting electric connection and dismantling U/S LED driver form led light fittings and fixed new driver 90/100 watt complete all as specified and as directed. |
| 164 | M&L for repair of mechanism of highmast and rewinding of three phase high mast tower motor 440 volt AC 1HP 1425 RPM if burnt and incl dismantling form highmast transportation to workshop for rewinding with existing size of super enamlled copper wire replacing of gear,bearing bush ,greashing varnishing etc for running of rope at satisfactory level and reinstalation complete all as specified and as directed. |
| 165 | M & L for PVC insulated copper conductor 4 sqmm 10 core complete all as specified and as directed. |
| 166 | Supply and fixing in replacement of high mast panel with complete copper wiring ,ML contractor 4 pole AC3 18Amp 9 KW -03 Nos ,Timer 32 Amp , TPN MCB 63 Amp with complete busbar and including taking down old panel complete all as specified and as directed by Engineer-in-Charge. |
| 167 | Supply and fixing MCCB in replacement of 63 Amps, 3/4 pole, 415 volts, 50 HZ, rupturing capacity 16KA, connection with proper size of thimbles complete including taking out defective/ unserviceable MCCB all as specified and directed. |
| 168 | Supply and fixing MCCB in replacement of 160Amps, 3/4 pole, 415 volts, 50 HZ, rupturing capacity 36KA, connection with proper size of thimbles complete including taking out defective/ unserviceable MCCB all as specified and directed. |
| 169 | S & F in repair GI Bracket for mounting street light fittings made out of light grade 32mm GI pipe and have angle of 120 degree incl fixing arrangement complete all as specified and as directed by engr-in-charge. |
| 170 | Supply and fix single core PVC insulated FR cable with multi stranded copper conductor 1.5 sq mm cross sectional area 3 core ,1100 volts grade all as specified and as directed. |
| 171 | Supply and fixing in replacement of automatic street light switch using Nature switch for automatic switching of street light based on LUX level of natural light. The sensor (nature switch) along with suitable power contactor , MCB and support terminals should be encloused in pole/wall mountable enclosure made of rust proof, electric shock proof, termite proof and FR grade SMC juction box (sintex make) conorming to IP 54. The contactor, MCB and copper circuit should suitable enough to take 3 phase load of 5 KW, contactor rating 25-32 Amps per phase, MCB SP rating of 32 Amps (03 Nos) |
| 172 | M/L for Repairs to out door LT panel including taking down for repair as follows :-( a ) Supply and fixing of MS sheet 16 SWG( 1.6 mm ) and fabrication of back side cover of LT panel including cutting to required size and shape fixing in position by bending, welding all as required for proper functioning of LT panel shutters including two coats of coats of synthetic enamel paint over a coat of red oxide.(b ) Supply and fixing of hinges , tee type stove enamelled black medium weight , cold rolled and mild steel 30 mm size and fixed door shutters .( c ) Supply and fixing of locking arrangement with MS sliding door bolts hasp and suitable for use with pad lock of size 200 mm.( d ) Mild steel work conforming to Fe-410-0 or Fe-310-0 as in angle iron frame work , cut to size including bending and welding angles as necessary and re -fixing of MS sheet of panel including a shop coat of red oxide primer. |
| 173 | M&L in replacement HERITAGE LED Post Ideal to lit up parks, garden ways and heritage sites 20 Watts complete all as directed by Engr-in -Charge Make :Crompton cat pat no -LPTH-20-CDL or eqult Havells/Bajaj/Surya |
| 174 | M&L in replacement of Inverted Tripod type LED bollard light 10 watt with soft light disturbution complete all as directed by Engr-in -Charge Make :Crompton cat pat no -LBLSN-10-CDL or eqult Havells/Bajaj/Surya |
| 175 | Supply and fixing in Replacement Digital Ammeter and Voltmeter set with connected wiring complete all as directed by Engr-In-Charge |
| 176 | Supply and fixing of copper thimbles using crimping tool for electrical connections with cable and connecting with suitable size of nuts / bolts and washers of size 120 sqmm to 185 sqmm LT cable size. |
| 177 | Supply and fixing of copper thimbles using crimping tool for electrical connections with cable and connecting with suitable size of nuts / bolts and washers of size 25 sqmm to 95 sqmm LT cable size. |
| 178 | Supplying and fixing in replacement of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with stranded aluminium conductor 3.5 core 25 sqmm laid in duct/ pipe including all electrical connection with required lugs and nuts, bolts complete incl taking down old cable all as specified and directed by Engr-in-Charge. |
| 179 | M & L GI tubing Light grade 50 mm incl all accessories for protection cable complete all as specified and directed in engr-in-chage |
| 180 | S & F in replacement Change over main switch, on load, four poles, 100 Amps, 415 Volts, with enclosure, fixed in the existing LT panel board/ sheet metal enclosure including connecting up incoming/ out going cables with suitable lugs and testing complete all as specified and as directed. |
| 181 | Material and labour for painting above the copping upto 1.5 mtr in alternatively black and white strips of 30 cm each & rest of the portion with two coats of silver/aluminium paint on steel tubular LT pole of any height after scrapping/removing the existing paint and the preparation the surface of steel tubular pole LT including painting of the channel cross arms, nut, bolts & washer, street light bracket and clamps complete all as specified and directed |
| 182 | S & F in repairs Mild steel work in framed work such as grills, Gates, Framed guard bars, gratings, ladders, Cable trays, Fencing etc., with ends of bars soldered/welded and/ or riveted, or forged into spikes, and similar work confirming to Fe 410 - O or Fe 310 - O incl two coats of mettallic paint over a coat of mettallc primer incl taking down old rusted steel work as directed. |
| 183 | Supplying and fixing in replacement of under ground cable XLPE insulated, 1100 volt grade heavy duty armoured with standed aluminium conductor 2 core 10 sqmm laid in trenches/ duct/ pipe including all electrical connection with required lugs and nuts, bolts complete all as specified and directed by Engr-in-Charge. |
| 184 | S & F double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 (Part I and II ) for protection of underground cable .Outer dia of pipe 50 mm with all fitting laid in trenches/road/nallah or fixed along wall ,poles or laid under floor (including cutting floor /Road and making good to match with existing adjointing surface etc for cable protection all as specified and as directed. |
| 185 | S&F in replcement FRP junction box for street light central with linked door control incl 6 amp MCB SP with aluminium bus bar-04 nos for controling street light/garden light complete as directed by Engr-in-Charge. |
| 186 | Supply and fixing LED Solar street light fitting 36 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. |
| 187 | Material and labour for substation yard spreading levelling with 20 mm graded coarse aggregate /gravells laid approximately 75 mm thick layer near VCB/Transformer /2/4 pole structure and plateform etc complete all as specified and as directed. |
| 188 | Surface cleaning by removing the roots completely from the earth, shrubs, vegetation, grass, bushes, weeds by excavation not exceeding 15cm deep including sweeping removing the same to distance not exceeding 50m away from the installation and burning the same all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |