Indian Tenders

Tender Notice

TDR 55919327
Tendering Authority Uttar Pradesh Power Corporation Limited
Tender No GEM/2026/B/7643876
Tender ID GEM/2026/B/7643876
Tender Brief Bids Are invited for Custom Bid For Services - Installation Of New Additional 63/100 Kva Dt Installation Of 11 Kv Rmu Work On Semi Turnkey Basis In Business Plan 2025- 26 Under The Area Of Edd Bah - (Part-A) Supply & Erection Providing & Fixing Of Db
City Agra
State Uttar Pradesh
Document Fees Refer document
EMD INR 9000.0 /-
Tender Value INR 9 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Bids Are invited for Custom Bid For Services - Installation Of New Additional 63/100 Kva Dt Installation Of 11 Kv Rmu Work On Semi Turnkey Basis In Business Plan 2025- 26 Under The Area Of Edd Bah - (Part-A) Supply & Erection Providing & Fixing Of Db Box , Providing & Fixing Of Stone Pad , Providing & Fixing Of Dropper Channel , Providing & Fixing Of Lt Incoming Pannel , Providing & Fixing Of Suspension Cl With I Hook , Providing & Fixing Of Suspension Cl , Providing & Fixing Of X Arm Cl , Providing & Fixing Of Dead End Cl , Providing & Fixing Of T Off Channel With Cl , Providing & Fixing Of Eye Hook , Providing & Fixing Of Chemical Earthing Of 11 Kv Rmu , Providing & Fixing Of Ms Top Channel 125*65*2240Sqmm , Providing & Fixing Of Cl For T Channel , Providing & Fixing Of Nut & Bolt Off Size , Providing & Fixing Of Lt Pole Cl With Nut & Bolts , Providing & Fixing Of Earthing Complete , Providing & Fixing Of Gi Pipe 6 Dia , Providing & Fixing Of Dp Cl , Providing & Fixing Of Danger Board , Providing & Fixing Of Ms Angle 75*75*6*2228Mm With Cl , Providing & Fixing Of Gaurding Angle , Providing & Fixing Of Gaurding Angle Cl , Providing & Fixing Of Db Cl , (Part-B) Carriage & Erection Construction Of Plinth For 11 Kv Rmu Of Size 6*6*3 Above Around Level On Ft Below The Ground Level Of 9 After Exavation Of 4 Earth Brick Ballast Shall Be Provided And Remmering Will Be Done Properly After Ballast Shall Be Provided And Rammering Will Be Done Properly After That A Retaining Wall 9 Width By First Class Brick In Ratio 1:4 Of Cement & Sand Shall Be Made The Earth Shall Be Filled Up To One Ft Below The Top Of The Plinth After This Brick Ballast Shall Be Provided Upto 6 From The Earth Level And Proper Rammering Shall Be Done One No. Jall Of 12 Mm Ms Tar Sgakk Ve Fixed In The Hollow Of Plinth And One Ft. Thick Rcc In Ration Of Cement Sand & Stone Ballast Shall Be Laid On The Top Of The Plinth. The 12 Mm Thick Plastering Shall Be Done All Round The Plinth In 1:4 Ratio Of Cement And Sand. (All Material Provided By The Contractor At His Won Cost For Proper Completion Of Work) , Carriage Of Pcc Pole 8.5 Mtr. Long. From Electricity Store Centretajganj Agra To Work Of Site Through Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work..(Distance 00-70Kms.) , Carriage Of 11Kv Rmu Set 3 Way From Electricity Store Centretajganj Agra To Work Of Site Through Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work..(Distance 00-70Kms.) , Carriage Of 63 Kva T/F Fromelectricity Store Centretajganj Agra To Work Of Site Through Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work..(Distance 00-70Kms.) , Carriage Of 100 Kva T/F From Electricity Store Centretajganj Agra To Work Of Site Through Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work..(Distance 00-70Kms.) , Cartiage Of 11Kv Xlpe Cable 3*185 Sqmm (200 Mtr), Lt Xlpe Cable 3.5X150sqmm (64 Mtr) From Electricity Store Centretajganj Agra To Work Of Site Through Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work.(Distance 00-70Kms.) , Carriage Of Following Material From Electricity Store Centretajganj Agra To Dump Site Through The Kacha And Pakka Road Including The Work Of Its Loading And Unloading At The Respective Ends Including The Cost Of Arrangement Of Labour, T&P, Carrier Etc. Required For Proper Completion Of Work.(Distance 00-50 Kms.) J) Jointing Kit Outdoor/Indoor 3X185 Sqmm (16 No), Line Material Viz. Lt Abc (3X95)+(1X70)+(1X16) Sqmm (1100 Mtr), Lt Abc (3X95)+(1X70)+(1X16) Sqmm (435 Mtr), A.C.S.R Weasal Conductor (820 Mtr), 11 Kv Disc Insulator (39 Nos.), 11 Kv Pin Insulator (42 Nos), 3 Phase Fuse Set (8 No.), Stay Set (26 No) And Other Line Material, If Required, , Erection And Grouting Of Single Pole 8.5 Mtr. Long Pcc Poles In 1:2:4 Ratio (Cement, Sand And Bricks Balast) Including Fixing Of All Accessories Alongwith Stone Pad As Per Respo Norms Labour, T &P And Carrier, Grouting Material Etc. Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Erection And Grouting Of Double Pole 8.5 Mtr. Long Pcc Pole In 1:2:4 Ratio (Cement, Sand And Bricks Balast) Including Fixing Of All Accessories Alongwith Stone Pad As Per Respo Norms Labour, T &P And Carrier, Grouting Material Etc. Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Installation, Testing & Commissioning Of 11Kv Rmu Set 3 Way With Power Back Including Fixing Of All Accessories T&P And Labour As Per Respo Norms And Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Fencing Of 11 Kv Rmu Shall Be 1150*1200Mm Made Of 35*35Mm Ms Angle Covered By Expended Metal 14 Swg Up To Full By Ms Flat By And 8 Swg Dia Bolt & Nut, (All Meterial Provided By The Contractor At His Won Cost) , Mounting & Installation Of 63 Kva T/F On Existing Double Pole In Proper Alignment Direction & Making Ht/Lt Connection All Cost Of Labour And T&P Which Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Mounting & Installation Of 100 Kva T/F On Existing Double Pole In Proper Alignment Direction & Making Ht/Lt Connection All Cost Of Labour And T&P Which Required Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Laying, Sagging, Stringing, Binding And Jumpering Of Line Material Viz. Lt Abc (3X95)+(1X70)+(1X16) Sqmm (1100 Mtr), Lt Abc (3X95)+(1X70)+(1X16) Sqmm (435 Mtr), A.C.S.R Weasal Conductor (820 Mtr), In Ht Line As Per Respo Manual And As Per Direction Of Supervising Engineer. It Includes The Cost Of Labour, T & P, Carrier Etc Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Laying Sagging Stringing And Binding And Jumpering Of 11Kv Xlpe Cable 3*185 Sqmm (200 Mtr), Lt Xlpe Cable 3.5X150sqmm (64 Mtr) In 11Kv/ Lt Line As Per Respo Manual And As Per Direction Of Supervising Engineer. It Includes The Cost Of Labour, T & P, Carrier Etc Required For Proper Completion Of Work Shall Be Done By The Contractor At His Own Cost. , Filling Of 33 Kv Jointing Kit 3X185 Sqmm Id/Od And Making Connection As Per Direction By Supervising Engineer. , Installation Of Stay Set Complete As Direction By Supervising Engineer. , Installation Of Lt Fuse Set As Direction By Supervising Engineer.

Key Dates

Publish Date 10-06-2026
Last Date of Bid Submission 25-06-2026
Tender Opening Date 25-06-2026

Contact Information

Company Name Uttar Pradesh Power Corporation Limited
Address 283111,EDC-II Fatehabad, Agra

BOQ Items

Sl. No. Item TitleItem Description
1(Part-A) Supply & Erection Providing & Fixing of DB Box(Part-A) Supply & Erection Providing & Fixing of DB Box
2Providing & Fixing of Stone padProviding & Fixing of Stone pad
3Providing & Fixing of Dropper ChannelProviding & Fixing of Dropper Channel
4Providing & Fixing of LT Incoming PannelProviding & Fixing of LT Incoming Pannel
5Providing & Fixing of Suspension Clamp with I HookProviding & Fixing of Suspension Clamp with I Hook
6Providing & Fixing of Suspension ClampProviding & Fixing of Suspension Clamp
7Providing & Fixing of X Arm ClampProviding & Fixing of X Arm Clamp
8Providing & Fixing of Dead End ClampProviding & Fixing of Dead End Clamp
9Providing & Fixing of T off channel with clampProviding & Fixing of T off channel with clamp
10Providing & Fixing of EYE HookProviding & Fixing of EYE Hook
11Providing & Fixing of chemical earthing of 11 KV RMUProviding & Fixing of chemical earthing of 11 KV RMU
12Providing & Fixing of MS TOP CHANNEL 125*65*2240sqmmProviding & Fixing of MS TOP CHANNEL 125*65*2240sqmm
13Providing & Fixing of clamp for T ChannelProviding & Fixing of clamp for T Channel
14Providing & Fixing of Nut & Bolt off sizeProviding & Fixing of Nut & Bolt off size
15Providing & Fixing of LT Pole Clamp with Nut & BoltsProviding & Fixing of LT Pole Clamp with Nut & Bolts
16Providing & Fixing of Earthing CompleteProviding & Fixing of Earthing Complete
17Providing & Fixing of GI Pipe 6\\" DIAProviding & Fixing of GI Pipe 6\\" DIA
18Providing & fixing of DP clampProviding & fixing of DP clamp
19Providing & Fixing of Danger BoardProviding & Fixing of Danger Board
20Providing & Fixing of MS Angle 75*75*6*2228mm with clampProviding & Fixing of MS Angle 75*75*6*2228mm with clamp
21Providing & Fixing of Gaurding AngleProviding & Fixing of Gaurding Angle
22Providing & Fixing of Gaurding Angle clampProviding & Fixing of Gaurding Angle clamp
23Providing & Fixing of DB ClampProviding & Fixing of DB Clamp
24(Part-B) Carriage & Erection Construction of Plinth For 11 Kv RMU of size 6*6*3 above around level on ft below the ground level of 9\\" after exavation of 4\\" earth brick ballast shall be provided and remmering will be done properly after ballast shall be provided and rammering will be done properly after that a retaining wall 9\\" width by first class brick in ratio 1:4 of cement & sand shall be made the earth shall be filled up to one ft below the top of the plinth after this brick ballast shall be provided upto 6\\" from the earth level and proper rammering shall be done one No. jall of 12 mm MS tar sgakk ve fixed in the hollow of plinth and one ft. thick RCC in ration of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand. (All material provided by the contractor at his won cost for proper completion of work)(Part-B) Carriage & Erection Construction of Plinth For 11 Kv RMU of size 6*6*3 above around level on ft below the ground level of 9\\" after exavation of 4\\" earth brick ballast shall be provided and remmering will be done properly after ballast shall be provided and rammering will be done properly after that a retaining wall 9\\" width by first class brick in ratio 1:4 of cement & sand shall be made the earth shall be filled up to one ft below the top of the plinth after this brick ballast shall be provided upto 6\\" from the earth level and proper rammering shall be done one No. jall of 12 mm MS tar sgakk ve fixed in the hollow of plinth and one ft. thick RCC in ration of cement sand & stone ballast shall be laid on the top of the plinth. The 12 mm thick plastering shall be done all round the plinth in 1:4 ratio of cement and sand. (All material provided by the contractor at his won cost for proper completion of work)
25Carriage of PCC Pole 8.5 Mtr. Long. from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)Carriage of PCC Pole 8.5 Mtr. Long. from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)
26Carriage of 11kv RMU Set 3 way from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)Carriage of 11kv RMU Set 3 way from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)
27Carriage of 63 KVA T/F fromElectricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)Carriage of 63 KVA T/F fromElectricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)
28Carriage of 100 KVA T/F from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)Carriage of 100 KVA T/F from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work..(Distance 00-70Kms.)
29Cartiage of 11kv XLPE CABLE 3*185 SQMM (200 mtr), LT XLPE Cable 3.5x150sqmm (64 mtr) from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.)Cartiage of 11kv XLPE CABLE 3*185 SQMM (200 mtr), LT XLPE Cable 3.5x150sqmm (64 mtr) from Electricity Store CentreTajganj Agra to work of site through Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.)
30Carriage of following material from Electricity Store CentreTajganj Agra to dump site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50 Kms.) J) Jointing Kit Outdoor/Indoor 3x185 sqmm (16 No), Line material viz. LT ABC (3x95)+(1x70)+(1x16) SQMM (1100 mtr), LT ABC (3x95)+(1x70)+(1x16) SQMM (435 mtr), A.C.S.R Weasal conductor (820 mtr), 11 kv Disc Insulator (39 Nos.), 11 kv Pin insulator (42 nos), 3 Phase Fuse Set (8 No.), Stay set (26 No) and other line material, if required,Carriage of following material from Electricity Store CentreTajganj Agra to dump site through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-50 Kms.) J) Jointing Kit Outdoor/Indoor 3x185 sqmm (16 No), Line material viz. LT ABC (3x95)+(1x70)+(1x16) SQMM (1100 mtr), LT ABC (3x95)+(1x70)+(1x16) SQMM (435 mtr), A.C.S.R Weasal conductor (820 mtr), 11 kv Disc Insulator (39 Nos.), 11 kv Pin insulator (42 nos), 3 Phase Fuse Set (8 No.), Stay set (26 No) and other line material, if required,
31Erection and grouting of Single Pole 8.5 Mtr. long PCC poles in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories alongwith stone pad as per RESPO norms Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.Erection and grouting of Single Pole 8.5 Mtr. long PCC poles in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories alongwith stone pad as per RESPO norms Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.
32Erection and grouting of Double Pole 8.5 Mtr. long PCC Pole in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories alongwith stone pad as per RESPO norms Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.Erection and grouting of Double Pole 8.5 Mtr. long PCC Pole in 1:2:4 ratio (cement, sand and bricks balast) including fixing of all accessories alongwith stone pad as per RESPO norms Labour, T &P and carrier, grouting material etc. required for proper completion of work shall be done by the contractor at his own cost.
33Installation, Testing & Commissioning of 11kv RMU Set 3 way with Power Back Including Fixing of All accessories T&P and Labour as per RESPO norms and required for proper completion of work shall be done by the contractor at his own cost.Installation, Testing & Commissioning of 11kv RMU Set 3 way with Power Back Including Fixing of All accessories T&P and Labour as per RESPO norms and required for proper completion of work shall be done by the contractor at his own cost.
34Fencing of 11 KV RMU shall be 1150*1200mm made of 35*35mm MS Angle covered by expended metal 14 SWG up to full by MS Flat by and 8 SWG dia bolt & nut, (all meterial provided by the contractor at his won cost)Fencing of 11 KV RMU shall be 1150*1200mm made of 35*35mm MS Angle covered by expended metal 14 SWG up to full by MS Flat by and 8 SWG dia bolt & nut, (all meterial provided by the contractor at his won cost)
35Mounting & Installation of 63 KVA T/F on existing Double Pole in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for proper completion of work shall be done by the contractor at his own cost.Mounting & Installation of 63 KVA T/F on existing Double Pole in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required for proper completion of work shall be done by the contractor at his own cost.
36Mounting & Installation of 100 KVA T/F on existing Double Pole in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required required for proper completion of work shall be done by the contractor at his own cost.Mounting & Installation of 100 KVA T/F on existing Double Pole in proper alignment direction & making HT/LT connection all Cost of labour and T&P which required required for proper completion of work shall be done by the contractor at his own cost.
37Laying, sagging, stringing, binding and jumpering of Line material viz. LT ABC (3x95)+(1x70)+(1x16) SQMM (1100 mtr), LT ABC (3x95)+(1x70)+(1x16) SQMM (435 mtr), A.C.S.R Weasal conductor (820 mtr), in HT line as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work shall be done by the contractor at his own cost.Laying, sagging, stringing, binding and jumpering of Line material viz. LT ABC (3x95)+(1x70)+(1x16) SQMM (1100 mtr), LT ABC (3x95)+(1x70)+(1x16) SQMM (435 mtr), A.C.S.R Weasal conductor (820 mtr), in HT line as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work shall be done by the contractor at his own cost.
38Laying sagging stringing and binding and jumpering of 11kv XLPE CABLE 3*185 SQMM (200 mtr), LT XLPE Cable 3.5x150sqmm (64 mtr) in 11KV/ LT line as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work shall be done by the contractor at his own cost.Laying sagging stringing and binding and jumpering of 11kv XLPE CABLE 3*185 SQMM (200 mtr), LT XLPE Cable 3.5x150sqmm (64 mtr) in 11KV/ LT line as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T & P, carrier etc required for proper completion of work shall be done by the contractor at his own cost.
39Filling of 33 KV Jointing Kit 3x185 sqmm ID/OD and making connection as per direction by supervising engineer.Filling of 33 KV Jointing Kit 3x185 sqmm ID/OD and making connection as per direction by supervising engineer.
40Installation of Stay Set Complete as direction by supervising Engineer.Installation of Stay Set Complete as direction by supervising Engineer.
41Installation of LT Fuse Set as direction by supervising Engineer.Installation of LT Fuse Set as direction by supervising Engineer.

Other Detail

Information Source https://gem.gov.in/
Download FileName File Description File Size
Download e9be75fd-9b19-4dad-a000-86576c67ae9c.pdf Tender Documents 0 KB
Download 1781093849.pdf Tender Documents 0 KB
Download 1781094423.pdf Tender Documents 0 KB
Download 1781094436.pdf Tender Documents 0 KB
Download 1781094833.xlsx Tender Documents 0 KB
Download 1781094846.pdf Tender Documents 0 KB
Download 1781094853.pdf Tender Documents 0 KB
Download 1781094860.pdf Tender Documents 0 KB
Download 1781094867.pdf Tender Documents 0 KB
Download 1781094955.pdf Tender Documents 0 KB
Download 1781094963.pdf Tender Documents 0 KB
Download 1781095012.pdf Tender Documents 0 KB
Download 1781095140.pdf Tender Documents 0 KB
Download 1781095146.pdf Tender Documents 0 KB
Download pqc_c1235581-5a49-4353-bbaf1781095492765_EDC2FATEHABADBUYER.pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.