Name of Work:- SITC of CCTV Camera System for Security purpose at malviya Nagar Ward No:-131 Hansh Marg (Part-2) Malviya Nagar Jaipur | Sl. No. | Item Description | |
| 1 | Supply, Drawing and OLTS Testing, of stranded OS2 Single mode (9/125 µm) glass optic fiber cable G652D as per latest ammendments of TIA/EIA 568/ISO/IEC with outer sheath, cable should be used for LAN and WAN back bones, for indoor/outdoor installations these sheathed cable be placed in existing MS/PVC /HDPE Conduits/ slotted channels with ferruling at both ends for identification complete in all respect. | | 2 | 6 fiber | | 3 | Supply, Installation, OTDR / OLTS Testing & Fusion Splicing of Fiber Singlemode Pigtail (9/125 µm (OS2) made of glass fiber optic, with semi-tight buffer PA/PBT, Ø 0.9 mm, yellow, singlemode G652.D (9/125 µm (OS2), should have length of min 1.5m, should be fitted at one end with any one type of single SC/LC/SN/CS type connector in acc. with IEC 61754-20, Should be delta IL < 0.2 dB after 500 mating cycles, It should be Zirconia (ceramic) ferrule with a PC polished endface geometry connector qualified in acc. with IEC 61753-1 for category U (uncontrolled environment). and qualified in acc. with IEC 61753-1, Performance acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, Standard Specification as per requirements. | | 4 | Supply, Installation, & Testing of Indoor duplex Singlemode patch cord (9/125 µm (OS2) made of glass fiber optic with LSZH jacket, F8 2.0x4.1 mm, yellow, singlemode G652.D (9/125 µm (OS2) Mounted on both sides with SC/LC/SN/CS type Duplex connectors in acc. with IEC 61754-20. Zirconia (ceramic) ferrule with a PC polished endface geometry, connectors should be tuned in accordance with IEC 61755-3-1 and qualified in acc. with IEC 61753-1 for category U (uncontrolled environment, duplex clip and white plastic dust cover, should comply to delta IL < 0.2 dB after 500 mating cycles, there should be an optional Visual coding, mechanical coding and lock protection on the patch cords which can be added on later stage. patch cords's performance should be acc. to IEC 61753-1 (Table A.12) as per latest ammendments of TIA/EIA 569B.3, as per requirements. | | 5 | Single Mode Patch Cord 1 Mtr. | | 6 | Supplying, Installation, Testing and commissioning of small form-Pluggable (SFP) for Network Switches. Must be hot Pluggable, RoHS Complaint, etc. complete as required.(For Each SM Fiber) all switches & related Fiber modules should be of same make & category for seamless integration with each other of Enterprise class. | | 7 | 1G SFP Single Mode/Multi Mode | | 8 | SITC of IP based 8MP 4K Ultra HD Bullet camera with 1/2.8\\" or larger Progressive Scan CMOS Sensor with resolutions up to 3840 × 2160 (4K) @30 fps, Should Support H.264, H.265, MJPEG, Quad/Triple streaming profiles, Frame rate upto 1-30 fps, , 120dB WDR, 2DNR/3DNR, BLC. Camera should support Open standard to support ONVIF (PROFILE S, PROFILE G, PROFILE T), 1/1 Audio In/Out or better and 1/1 Alarm In/Out or better, onboard storage upto 512GB (SD card not included). The camera supports advanced Video Analytics (VA) including motion detection and alarm should be trigger on Tampering, Network disconnect, IP address conflict. CCTV should have password protection, privacy mask, IP address filtering, Metal Housing, Vandal-proof housing, IP67, IK10, DC 12V & PoE, Complete with Junction box for cable management. Operating Conditions within -20°C to 60°C or better. The MAC address of Camera/NVR must be registered in the name of OEM. Regulatory approvals include FCC, BIS/UL, CE. CCTV cameras must be BIS Registered Cyber Security Certified by STQC as per IoTSCS and meet the Essential Requirement (ER) issued by MeitY for security. The CCTV OEM should have its service/ support center in Rajasthan. | | 9 | 2.8/3.6/4/6/8 mm lens with IR Range - 50mtr or higher | | 10 | SITC of 3.5\\" internal HDD for cctv recording ,capable for 24x7 operation, hdd rpm capacity shoud be 7200 rpm or better, Buffer should be 512 MB as required of following size. | | 11 | Supply, Installation, & Testing of 19\\" 1U Rack Mounted/ surface mounted aluminum/ CRCA powder coated, OS2 Single mode glass Fiber Optic Cable Patch panel/LIU loaded with flangeless/screwable duplex adapters for SC/LC/SN/CS type, It should have easy removable Top plate with push buttons, there should be a splice tray installed in the Patch panel/LIU which can handle the fiber cores, splice tray should be PC+ABS material, it should include accessories like mounting hardware, gormetts, heat shrink tubes/sleeves, screws, nuts to install the panel for rackmount applications as per requirement complete in all respect. All as per pre approved by Engineer in charge. | | 12 | 6 Ports | | 13 | Supply & fixing of GI pipes confirming to IS : 1239 P - 1 ( 2004 ) with socket,elbow,tee, flanges duly screwed & welded including rubber washer, nuts & bolts of 8mm dia complete in all respect. ( If Pipe Laid Underground Excavation and refilling cost will be paid extra) | | 14 | 100 mm dia. | | 15 | Providing & Laying XLPE insulated & P.V.C. sheathed Armoured Copper cable confirming to IS :7098 P - I of 1.1 KV with electrolytic grade Copper made of copper rods confirming to IS 613-1964, of purity >99.7 %, round / flat strip armouring, Inner / outer sheath confirming to IS:5831 in existing RCC / Hume / Stoneware / PVC pipe/ open duct/cable trench / Cable tray(with cable tie) including testing etc. as required of following size. | | 16 | 1.5 Sq. mm | | 17 | 3 core | | 18 | P / L of Double wall corrugated HDPE pipe confirming to IS : 16205 P-24, Stiffness Class 750 N, Externally corrugated and having smooth surface inside with HDPE Coupler, Elbow, Tee at required Depth below the ground for laying cable of following Nominal Outer dia. MFR Test report from NABL accrediated is to be submitted.(Excavation of trench, CC Haunching, Back filling of Earth with compaction is to be Paid Extra). | | 19 | 50 mm | | 20 | Add extra in item no. 11.1 to 11.4 for Laying Charges for cable through Manual Boggi by making pit at regular interval and repairing the pit after laying of cable with PCC/ Bitumin as required. | | 21 | SITC of 4MP Motorised VF ANPR Camera: 1/1.8'' CMOS Sensor; 2688 × 1520, Mainstream (2688 ×1520@25fps/30 fps or better; 0.0001 Lux. Illumination or better; H.265 compression; Electronic Shutter 1/50–1/1,00,000, auto or manual; HLC/BLC/WDR 140db or better; motorized vari-focal 10~50mm lens; vehicle capture, Max IR Distance 30m; Vehicle Detection Vehicle capture rate ≥99%; Supports recognizing vehicle type, vehicle logo, vehicle color, license plate, Vehicle recognition rate ≥95%; 10/100/1000mbps network port; dual RS485 port; RS 232 port; Alarm In/Out: 3In/2out; audio 1 In/1 Out; Onboard storage up to 512GB (SD card not included), Working Temperature −30°C to +65°C; Power Supply: 12V DC or PoE; IP67 or better; complete with mounting accessories, The MAC address of Camera/NVR must be registered in the Name of OEM it and should originate from India. Regulatory approvals include FCC, CE, CCTV camera must be BIS Registered Cyber Security Certified by STQC as per IoTSCS and Meet the Essential Requirement (ER) issued by MeitY for Security. Ther CCTV OEM should have its office and Service/Support centre in Rajasthan, ISO9001:2015, ISO 14001:2015, ISO 27001:2013, ISO 45001:2018, IEC27032:2012, CMMI Level 5.The CCTV OEM should have its office and service/ support center in Rajasthan. AII as per site requirement & pre approved by Engineer in charge. | | 22 | SITC of 8 port Giga PoE Switch with dual uplink : unmanaged PoE switch; 8X10/100/1000 mbps Base-T PoE; 2*10/100/1000 Base-T (Uplink) or 2*1000 Base-X (uplink); PoE Power Consumption per Port: ≤30W; power budget: minimum 96 W; PoE Protocols: IEEE802.3af, IEEE802.3at ; Switching Capacity: 20 Gbps or better; MAC Table Size 2K or better; Working Temperature: -5°C~55°C; Power supply: DC48~57V Certificate of compliance: CE/FCC. All as per pre approved by Engineer in charge. | | 23 | Supply ,Installation, testing & commisioning of Outdoor Metal Rack IP66 Rating along with Power Board, 19\\" provsion for mounting network PoE switch and Fiber termination LIU with proper glanding, should be protectd from dust, water and insects etc.All as per pre approved by Engineer in charge. | | 24 | GST@18 % Please Enable Macros to View BoQ information |
|