|
| 1 | Sch 'A' |
| 2 | Taking down chowkhat or frame exc. 1.5 sqm but n.exc 4 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 3 | Taking down chowkhat or frame n .exc. 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 4 | Taking down shutter of any description exceeding 1 Sqm and n exc 2 sqm each complete all as specified and as directed. |
| 5 | Taking down shutter of any description exceeding 2 Sqm each complete all as specified and as directed. |
| 6 | S&F for Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc., complete all as specified and directed. |
| 7 | S&F for Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, tarring back of chowkhats & holdfast etc, complete all as specified and directed. |
| 8 | M&L cement concrete 1:3:6 type Co (using 12.5 mm thick stone aggregate) as filled in door frame chamfered angles, Hold Fast and throating, complete all as specified and directed. |
| 9 | S&F of 2nd class hardwood factory made plain framed pannelled door shutters 35mm thick (two layer panel) with lock rail and panel of 9mm BWP commercial ply or 12mm verneering on both faces. The size of rail and stile as per IS-1003, SSR Pt-I kiln seasoned and chemically treated all as specified and as directed. |
| 10 | M&L for 35mm thick factory made glazed and skeleton shutters,2nd class hardwood, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 11 | Cutting holes in brick wall built in cement mortar exc. Half brick but not exc. one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 as required complete all as specified and directed. |
| 12 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening all as specified and directed. |
| 13 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement all as specified and directed.. |
| 14 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 15 | S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed. |
| 16 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.. |
| 17 | S&F Sheet glass 5.5mm , ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane all as specified & directed. |
| 18 | Taking down existing Aluminum door shutter and adjusting the floor spring, locking devices, towerbolts and oiling the components and refixing the same on same opening and making smooth function of the door etc complete all as specified and directed. |
| 19 | Taking down shutter of any description exc 1 Sqm but not exc 2 sqm and refixing the same opeing after resecuring or easing and adjusting etc complete all as specified and directed. |
| 20 | Ditto all as per item No 18.00 above but exceeding 2 sqm complete all as specified and directed. |
| 21 | S&F in repairs Pre-laminated particle board 18/19mm thick, interior grade, pre laminated one side decorative choice lamination and side balancing white,fixed in frame, complete all as specified and as directed. |
| 22 | S&F steel window & ventilator 1.25mm thick box type ERW hollow P section of size 60mm x 25mm, 1.25 thick sheet single rebated comprises glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 Four Nos for each window including following fitting welded to frame shutter :(a) Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window.(b) Handles of z section 100mm long(c) Stopper - 01 No per leaf(d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf(e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf (f) Fabrication & fixing arrangement .Note : Glass , guard bar and painting shall be measured and paid separately under appropriate item etc complete all as specified and directed. |
| 23 | S&F steel window and ventilator 1.25mm thick box type ERW hollow P section of size 60mm x 25mm, single rebated comprises gauzed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with one or two openable leaf consisting two Nos sash bar of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:3:6) type C-1 Four Nos for each window including following fitting welded to frame shutter : (a) Mild Steel Hold fast, 150mm long of 12mm square bar made to shape-04 Nos per window (b) Handles of z section 20mm x 100mm long (c) Stopper - 01 No per leaf (d) Cleat 55mm long of hollow square 15mm x 20mm x 63mm welded to hinges - 01 No per leaf (e) MS Pintal hinges of size 75mm x 75mm x 12mm-02 Nos per leaf complete all as specified and shown on drawings. Note : Wire mesh , guard bar and painting shall be measured and paid separately under appropriate item etc complete all as specified. |
| 24 | M&L for framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks ,cooler stand and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 25 | Hacking out old broken glass ( any thickness, size, quality or description ) from metal/steel frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 26 | M&L for 3mm thick Sheet glass, ordinary quality and glazing with silicon sealant in square n exc 0.5 sq.m in each pane complete fixed in repair all as specified and directed. |
| 27 | S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 28 | S&F in Aluminium handles, cast type, anodised 150mm long completed all as specified and directed. |
| 29 | S&F 300 mm long ordinary rat tail rod paltren spring incl roller and roller plate (Mild steel) complete all as specified and directed. |
| 30 | S&F 100mm size Butt hinges, medium weight, cold rolled mild steel bright finish complete all as specified and directed. |
| 31 | S&F 150mm aluminium anodised tower bolts of extruded section fixed with screw, complete all as specified & directed. |
| 32 | S&F door closer aluminium (Die cast) body hydraulically regulated designation No. 2 universal type, suitable for door shutters of 36 to 60 Kg (Cast iron body) etc complete all as specified and directed. |
| 33 | S&F in Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolts 200 mm complete all as specified and directed. |
| 34 | S&F in repair 25 mm dia fancy type mild steel, chromium plated curtain rod fixed in position with fixing brackets , stops, rollers, etc. complete all as specified and directed. |
| 35 | M&L for preparation of new or previously untreated wooden surface of any description two coats of synthetic enamel paint over a coat of pink primer including prepration to new wooden surfaces exc.10cm in width or girth complete all as specified and directed. |
| 36 | M & L for preparation of new or previously untreated steel surface of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 37 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 38 | M&L for brick work with sub class \\"B\\" bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 39 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 40 | M&L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as directed. |
| 41 | Complete all as above but as in skirting over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 42 | M&L for glazed ceramic coloured tiles in vertical surface 300x450x7mm thick, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed. |
| 43 | Taking down cement plaster on brick wall etc incl racking out joints hacking for key scrubbing down with water etc. complete all as specified & directed. |
| 44 | M&L rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cm 1:6 finished even and smooth with out using extra cement complete all as specified & directed. |
| 45 | M&L 15mm thick rendering on fair faces of brickwork or concrete surfaces of wall in cement mortar 1:4 finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 46 | M&L two coats of cement base paint including preparation of newly plastered surfaces complete all as specified and directed. |
| 47 | M&L for preparation of new plastered surfaces of walls of any description and applying two coats of distempering of wall with distemper oil emulison (any tint) complete all as specefied and directed. Please Enable Macros to View BoQ information |
