|
| 1 | Part A Erection Part for 22/.4 KV 25 KVA Transformer |
| 2 | Erection of 25 kVA 22/0.4 kV Sub-station :- Digging of Pit for two no. Poles , Drilling of Holes In X Arms, Preparation of Platform Structure, Erection of Double Pole, Concreting 1:1.5:3 (1 cement : 1.5 coarse sand): 3 graded stone aggregate 20 mm nominal size),Erection of Platform,Erection of X-Arms, Drop-Out fuse unit ,Erection of Jumper ,Earthing for 3 Nos Earths ,Providing Earthing Conn. To G.O Switch, Lightning Arrestor Etc.& Poles,Prividing earthting to the Transformer, LT Box, Meter Box etc,Barbed Wire & Painting,Erection of 25kVA Transformer, LT Box, MCCB Switch, Cable, service Cable and Energy Meter etc. complete in all respects as directed by Engineer in-charge |
| 3 | Manual carriage of 25 kVA 22/.04 kV distribution Transformer with allied material charges for an Average Lead 1.000 Km. from Road Head to Site of Work as per Cost Data 2023-24. AVERAGE LEAD -1.00 Kms. |
| 4 | Part B Supply Part ( 22/.4 KV 25 KVA Transformer ) |
| 5 | Prov. 22/0.4 kV 25 KVA Distribution Transformer |
| 6 | Prov. S/T Pole 9.00 Mtr. Long |
| 7 | Prov. RCC Muff with C:C filling 2000 mm length |
| 8 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for incommer line |
| 9 | MS Angle Iron (50X50x6 mm), Length: 2800 x1 Nos for LA's |
| 10 | X-Arm: [Channel Iron (75x40x6 mm), Length : 2800 mm X 4 Nos] for supporting DO fuse unit & GO switch |
| 11 | Transformer Belting & Knee Bracing |
| 12 | X-Arm: [Channel Iron (100x50x6 mm), Length : 2800 mm X 2 Nos] for Transformer Bed |
| 13 | X-Arm [Channel Iron (100x50x6 mm), Length : (460 mm) x 2 Nos for supporting Main Channel of Transformer] |
| 14 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 15 | MS Angle Iron (35X35x5 mm), Length : 460 x 2 Nos |
| 16 | MS Angle Iron (50X50x6 mm), Length : 950 mm x 2 Nos for Bed Knee Bracing |
| 17 | Transformer LT Dist Box and GO Switch fixing Assembly |
| 18 | MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos |
| 19 | MS Angle Iron (50X50x6 mm), Length : (450 mm) x 1 Nos |
| 20 | GO Switch Handle Supporting: [Channel Iron (75x40x5 mm), Length : 460 mm |
| 21 | GO AB Switch Unit (11kV, 400A, 25 KA ) Tripple pole O/D typ |
| 22 | D.O Fuse Unit |
| 23 | Surge Arrester, 9 kV Station Class (Porcelain Type) |
| 24 | Discs insulator sets (comprising 1 No. Disc: ^^(Porcelain, BS, 12 kV, 90 kN) including Dead End Clamps etc.) |
| 25 | Stay set complete |
| 26 | Stay Wire (7/3.15 mm) (9.0 kg Per Stay Set) |
| 27 | Pipe Earthing Set |
| 28 | 6 SWG GI wire For Earthing |
| 29 | LT Distribution Panel Box with MCCB(50A, 25 kA, 4P) |
| 30 | Half Clamp (M.S. Flat 50X6 mm) |
| 31 | Full Clamps (M.S. Flat 50X6 mm) |
| 32 | Nuts and Bolts of Various Sizes (Galvanised / Coated) [Preferably 16 mm Φ or more (with flat and spring washers)] |
| 33 | Aluminium Thimble |
| 34 | Copper Thimble 200 Amp |
| 35 | Danger Plate |
| 36 | Barbed Wire |
| 37 | LT Cable (3.5 Core) 70 mm² |
| 38 | a)Aluminium Paint. |
| 39 | b) Red Oxide |
| 40 | Chain link fencing , angle iron , Gate etc. for transformer fencing ( Ref civil work at page no 176) Please Enable Macros to View BoQ information |