|
| 1 | Shifting and loading of 1.0 MT 40mm dia MS round bar on trailer/truck at Central Strore Sarnath |
| 2 | Proper and safe carriage of 1.0 MT 40mm dia MS round bar from Central Store Sarnath to 220 KV substation Gajokhar by private trailer/truck, distance approx. 42 KM. |
| 3 | Unloading and shifting of 1.0 MT 40mm dia MS round bar from trailer/truck at 220 KV S/S Gajokhar and its proper stacking there. |
| 4 | Laying of 40 mm dia MS round bar 0.7 Meter below ground level including cutting, bending, straightening, welding, and painting, excavation, back feeling & all other associated work to complete the job satisfactorily as per direction of Engineer in charge (M.S. round bar shall be provided by department). |
| 5 | Fabrication of electrode by 40 mm dia MS rods in length of 3 mtr by making an edge at one end for ease in piercing below 1200mm into the ground using wooden hammer completely at all the junction points along with welding & painting at outer periphery of earth mat as per relevant IS (M.S. round bar shall be provided by department). |
| 6 | Interconnection of the earth mat laid with the existing earth mat of the 220 KV S/S Gajokhar at 10 specified point by welding as that complete earth mat acts in coherent manner to provide proper earthing of the substation. |
| 7 | Sorting counting shifting of GI structure to loading point and loading on private vehicle at EFU Naini, Prayagraj ( 4 MT Approx.). |
| 8 | Safe Carriage of GI structure(4 MT Approx.) from EFU Naini Prayagraj to 220 KV S/S Gajokhar (Approx distance 180KM) through private vehicle to be provided by the contractor. |
| 9 | Unloading of structure(4 MT Approx.) from vehicle, its sorting counting and proper stacking at the premises of 220 KV substation Gajokhar at suitable place. |
| 10 | Erection of structure parts of Main & Auxiliary structure. The job consist to shifting of all material, structure parts, nut bolts washers etc from store to work site, erection of structure as per relevant drawing and practices. |
| 11 | Dismantling of old security fencing and horizontal angle pales, including gas cutting of stay and upright for extension of switchyard, including dismantling base of above ground level and shifting material at safe place. |
| 12 | Erection of following equipments including shifting from stores under this division to erection site including all other associated works to complete the job satisfactorily. |
| 13 | 36 KV VCB |
| 14 | 36 KV CT ( Metering ) |
| 15 | 36 KV CT Junction Box (Metering) |
| 16 | 36 KV CT(Protection) |
| 17 | 36 KV CT Junction Box (Protection) |
| 18 | 36 KV PT |
| 19 | 36 KV PT Junction Box |
| 20 | 36 KV LSI |
| 21 | 36 KV LSI Junction Box |
| 22 | 36 KV BSI |
| 23 | 36 KV BSI Junction Box |
| 24 | 33 KV C&R Panel (Numerical Type) |
| 25 | Erection of 33 KV Main Bus bar of Single Moose conductor including stringing of bus bar with disc insulators cutting bending shifting and all other associated work for completion of work satisfactorily. |
| 26 | Laying of D/C 33 KV XLPE Power cable of size 3Cx300 sq.mm below 1000mm from ground level including excavation of trench and laying of cable and putting Ist class bricks on its 75mm edge along with cable on both side. Filling the same with ganga sand and then putting bricks on 380mm/patiya to cover the trench and then filling with earth including cost of bricks sand miscellaneous and all other associated work to complete the job satisfactorily. |
| 27 | Hoisting of 33 KV 3Cx300 sq.mm cable on pole/structure through GI pipe of size 6\\"(150mm) dia 3 mtr long including its jumpering with the help of suitable size of aluminium lugs. |
| 28 | Termination of jointing of above power cable by 3Cx300 sq.mm cable jointing kit O/D type and all other associated works to complete the work satisfactorily as per technical specification |
| 29 | Fabrication fixing and fitting of cable structure in shape of H-pole, 3 mtr long including its grouting with RCC of size 150x150x150mm in ratio 1:4:8 including all men material except structure/angle. |
| 30 | Jumpering of following bay equipments with the help of ACSR Panther conductor including cutting bending clamping with all other associated work from main bus to outgoing isolators for all phases. |
| 31 | Laying of following sizes of control cable in the cable trenches from C&R Panel to various type of equipments, junction boxes in switch yard as per cable schedule, its clamping/binding at every two meter distance with aluminium sticks 25x1mm size including carriage of cable drums from store to laying site and shifting back to store and all other associated work to complete the job satisfactorily as per tech. specification: |
| 32 | 2x2.5mm²Control Cable |
| 33 | 4x2.5mm²Control Cable |
| 34 | 6x2.5mm²Control Cable |
| 35 | Termination of following size of cable as laid above as per cable schedule including making necessary holes in glands plate or boxes where ever required. Supply and fixing of cable glands of appropriate size. Supply and providing ferrules and No. for each core of cable and its termination with crimping type lugs of Dowell/Tension and all other associated work to complete the job satisfactorily as per tech. specification: |
| 36 | 2x2.5mm²Control Cable |
| 37 | 4x2.5mm²Control Cable |
| 38 | 6x2.5mm²Control Cable |
| 39 | Cutting straitening bending laying of 75x10 mm MS flat for earthing of main structures including welding with main earth mat below 500-700 mm of ground level with object to earth excavation of trenches its back filling, painting with one coat of red oxide primer and two coats of synthetic enameled green colour with all cost of MS flat, Paint, T&P required for completion of work. |
| 40 | Earthing of trench along with 50x6mm MS flat after cutting and welding with cable rack and trench with all cost of MS flat, including painting with one coat of red oxide primer and two coats of synthetic enameled paint. |
| 41 | Fabrication of display board made of M.S. angle iron 50x50x6mm, 3 long support and M.S. board of 2'x1' M.S. sheet 18 gauge and M.S. flat iron 25x6mm size 2'x1' welded on M.S. sheet after then M.S. pipe of 1.5\\" dia. fitted around M.S. flat on the sheet board and 0.5\\" dia M.S. pipe 4\\" long welded in M.S. angle iron from two places at one side and two at other to complete the display board. Digging pit size 2'x2'x3' and grouting above board with 1:2:4 cement, ballast, sand ratio and making plinth of size 1'x2'. Board shall duly painted by yellow color and equipment name shall be written in black. |
| 42 | Supply & fixing of 250W outdoor type flood light complete fitting with all fixing accessories including bracket and clamps of Philips/Crompton/Havells/Bajaj/Halonix make. Original warranty card should also be submitted along with above material. |
| 43 | Supply |
| 44 | Tension type gun fitting suitable for 70kN disc insulator complete with all accessories suitable for Moose conductor. |
| 45 | Suspension type gun fitting suitable for 70kN disc insulator complete with all accessories suitable for Moose conductor. |
| 46 | PG clamp Moose to Panther made of LM-6 alloy four bolted type complete with good quality nut bolt washer and spring washer exactly as per sample in ready to use condition. |
| 47 | PG clamp Panther to Panther made of LM-6 alloy four bolted type complete with good quality nut bolt washer and spring washer exactly as per sample in ready to use condition. |
| 48 | PG clamp Moose to Moose made of LM-6 alloy four bolted type complete with good quality nut bolt washer and spring washer exactly as per sample in ready to use condition. |
| 49 | Supply of GI Nut bolt of Size 16x40mm |
| 50 | Supply of GI Nut bolt of Size 16x45mm |
| 51 | Supply of GI Nut bolt of Size 16x50mm |
| 52 | 36kV HT Power Cable 3Cx300 sq.mm Al. XLPE cable |
| 53 | Outdoor Cable Jointing Kit 3Cx300 sq.mm XLPE cable |
| 54 | Supply of GI pipe B class of size 6\\"(150mm) dia. |
| 55 | supply of 50x6 mm m s flat |
| 56 | supply of 75x10 mm m s flat Please Enable Macros to View BoQ information |