|
| 1 | Earth work in excavation in foundation in ordinary soil including all lead and lift and cost of all labour and T&P etc. required for proper completion of work as per direction of Engineer in- charge. |
| 2 | Providing and laying of P.C.C. work in 1:4:8with cement, coarse sand and 20 mm crushed stone grit including cost of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer in -charge. |
| 3 | Providing and filling Ganga sand including cost of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer in -charge. |
| 4 | Providing and laying of R.C.C. in foundation work in 1:1.5:3 with cement, coarse sand and 20 mm crushed stone grit including cost of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer in -charge. |
| 5 | Centring and shuttering for R.C.C. work including rent of shuttering material, labour and T&P etc. required for proper completion of work as per direction of Engineer in -charge. |
| 6 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. / above plinth level.(Thermo-Mechanically Treated bars of grade Fe-500D or more.) |
| 7 | Providing and laying M-150 Brick work in 1:4 C.M.including cost of all material, labour and T&P etc. required for proper completion of work as per direction of Engineer in -charge. |
| 8 | Providing and applying 10 mm to 15 mm Cement Plaster in 1:4 cement mortar including all cost of material, labour, T&P etc. for proper completion of the work . |
| 9 | Providing and applying 10 mm to 15 mm Cement Plaster in 1:6 cement mortar including all cost of material, labour, T&P etc. for proper completion of the work . |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Including supply of material ,labour, T&P etc. required for proper completion of the work. |
| 11 | Finishing wall with premium Acrylic smooth exterior paint with silicone additives of required shade New/old work ( Two or more coats applied @ 1.43 ltr/10 sqm) over existing cement paint surface ( apex Ultima, weather coat all guard ) asian, berger. Including supply of material ,labour, T&P etc. required for proper completion of the work. |
| 12 | Finishing wall with two coat oil bound distemper on new work including all T&P requared for completion of the work. |
| 13 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. |
| 14 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) Charge. 35 mm thick |
| 15 | Painting two coat of synthetic enamel paint on old/new surface with superior quality approved make as mentioned in including cost of all material, labour T&P etc. required for Proper Completion of Work. |
| 16 | Providing and fixing factory made ISI marked steel glazed windows and ventilators, side /top /centre hung, with beading and all members including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment).10.11.2 |
| 17 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes (weights not less than 10 kg/ sqm) |
| 18 | Tile Work in Skirting, Risers of Steps and dado up to 2m height over 12 mm thick bed of Cement mortar 1:3 and jointed with grey cement slurry @ 3.3 kg/sqm , including pointing in white cement mixed with pigment of matching shade complete. |
| 19 | Providing and laying Vitrified tiles in floor with different sizes ( thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622. of approved brand & manufacturer, in all colours and shade laid with cement based high polymer modified quick set tile adhesive ( water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints |
| 20 | Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level.300 mm dia |
| 21 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge. 100 mm nominal size dia |
| 22 | Supplying, Installation, Testing and Commissioning of three phase open well ISI Marked submersible pumpset of 1.5H.P. capacity suitable for operation on 415V(+-10%), 3- phase AC supply compatible for operations on dynamic variable frequency / speed having IP 68 Protection including providing required no's of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required. and making of flexible IP68 cable connections etc. complete of suitable head and discharge etc. complete as required. |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work) 40 mm nominal dia Pipes |
| 24 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work) 15 mm nominal dia Pipes |
| 25 | Providing and laying chromium plated bib cock, complete with all materials. |
| 26 | Fixing C.P. brass soap dish with C.P. brass brackets fixed to wooden plugs, plastic sleeves with C.P. brass screws. |
| 27 | Providing and laying Indian type white glazed Providing and laying earthen ware 1st quality ISI marked W.C. pan size 580 mm Indian make of approved quality including cost of all material. |
| 28 | P/F European type white glazed Providing and laying earthen ware W.C. pan (Indian make) of approved 1st quality ISI marked Bakelite seat cover & lid with C.P. brass hinges and rubber buffers. |
| 29 | Providing and laying wash basin with single hole/number of holes for pillar tap with C.I. or M.S. brackets painted white including cutting hole & making good the same but excluding fittings. 630X450 MM |
| 30 | Providing and laying mirror of 450x350 size of approved make with teak wood moulded frame and 6 mm thick hardboard backing including cost of all material, labour, T&P etc. |
| 31 | Polyethylene water storage tank with cover and suitable locking arrangement. |
| 32 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes of Dia 110 mm with 6 Kg preesser ISI make.all as Speacified and directed. |
| 33 | White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS:255 |
| 34 | Providing and fixing square mounth sw 150x100mm size p type trap class sp-1 complete.direction of engineer in charge |
| 35 | Wiring for light point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 36 | Providing and fixing hexagonal G.I. box for ceiling fan clamp, of internal dia 140 mm, 73 mm height , top lid of 1.5 mm thick G.I. Sheet with its top surface hacked for proper bonding , top lid shall be screwed into the G.I. box by means of 3.3 mm. dia Round Headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing . |
| 37 | Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. (1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 38 | Wiring for fan point/ exhaust fan point/point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 39 | Wiring for power plug with 2x4 sq. Mm FRLS PVC insulated copper conductor single core in surface/ recesed steel conduit alongwith 1 no. 4 sq. mm FRLS PVC inulated copper coductor single core cable for loop esrting as required. |
| 40 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, ncluding painting of fittings and brackets, cutting and making good the walls wherever required : including painting of fittings and brackets, cutting and making good the walls wherever required : 510x1040 mm bowl depth 250 mm |
| 41 | Providing and fixing PVC waste pipe for sink wash basin urinal including PVC waste fitting complete. |
| 42 | Providing and laying Ceramic glazed anti skid floor tiles of size 300x300 mm laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 43 | Providing and brick coba 12 mm thick laid with M150 class brick bat coba 75 mm thick with gap of 15 mm to each other over 20 mm thick base of cement mortar 1:4 cement sand mixed with water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse with top finished plaster mixed with acetic water proofing compound @ 2% by weight & ncluding supply of all material , labour , t&p tc complete for proper completion of work . |
| 44 | Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design In 75x75 mm deep chase |
| 45 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400 micron, finished with 12mm cement plaster 1:3 (1 cement :3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 46 | Providing and fixing in position uPVC Nahni trap conforming to IS:13592 including providing necessary steel support and as per Specification. set in cement concrete mix 1:2:4 complete as required. 100 mm inlet and 100 mm outlet. |
| 47 | Providing and fixing toilet paper holder : C.P. brass |
| 48 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 49 | Providing and laying C.P. brass angle valve for cistern, wash basin, Gyger etc. 15 mm nominal hole size including cost of all material, labour, T&P etc. |
| 50 | Providing and laying pedestal for wash basin complete recessed at the back for the reception of pipes and fittings |
| 51 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm |
| 52 | Supplying and fixing metal box of 200 mm X 300 mm X 60 mm deep sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. |
| 53 | Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work. |
| 54 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws . 35 mm thick shutters, Second class teak wood |
| 55 | Fabrication of mild steel / iron work in grill, gates , railings, door and window frames including cutting, drilling, weldings/reveting and hinges, where necessary and fixing in position including cost of all materials, labour T&P etc. Required for proper completion of work with one coat of red oxide primer. |
| 56 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (1.00 mm thick with zinc coating not less than 275 gm/m2) Please Enable Macros to View BoQ information |