|
| 1 | Demolishing cement concrete manually by mechanical means including disposal of material within 50 meters lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). DSR No. 15.2.1 |
| 2 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In Cement Mortar. DSR No. 15.7.4 |
| 3 | Dismantling the old rusted MS pipe delivery header of 600mm dia along with stub connection 400mm dia by cutting with the help of gas cutter in parts including the cost of cutting of nuts and bolts MS flanges along with T&P required at site complete in all respects. |
| 4 | Dewatering with the help of 2no. Dewatering pumps for 6 hours including the cost of diesel and transportation (2No.@ 6hour each =12 Hour.) |
| 5 | Supply, Etraction & commissioning of following Pipes & specials made H.R. coil/sheet duly arc welded including cutting, welding, jointing including anti- corrosive epoxy painting inside and outside complete in all respects. (make of sheet for pipe shall be TATA/SAIL/WELLSPUN.)(NSI) |
| 6 | 100mm dia MS Pipe, 6mm thick |
| 7 | 400mm dia MS Pipe, 8mm thick |
| 8 | 500mm dia MS Pipe, 8mm thick |
| 9 | 600mm dia MS Pipe, 8mm thick |
| 10 | Extra for fabricating/manufacturing bend of required degree by means of cutting, sizing, welding etc. including fixing of same on pipeline with the help of arc welding, including cost of T&P complete in all respect to entire satisfaction of EIC. (Note: cost of barrel/MS pipe required for making bend/Tee and Reducer etc. shall be paid under Item No.5) |
| 11 | 500mm dia MS bend of any degree required as per site requirement (cost is to considered 40% over and above Item No.5.3) |
| 12 | Fabricating, Providing and fixing of slip on flange made out of MS plate including cost of jointing of slip flange on MS pipe with the help of arc welding as per site requirement |
| 13 | 100mm i/d 12mm thick |
| 14 | 400mm i/d 25mm thick |
| 15 | 500mm i/d 25mm thick |
| 16 | 600mm i/d 25mm thick |
| 17 | P/F of 5mm thick rubber sheet between slipon flanges along with packing of reqired number of nut and bolts along with warshers including cost of cutting of rubber packing to make acurate size and tigtning of nut and bolt complete in all respect. |
| 18 | For 100mm dia slip on flanges |
| 19 | For 400mm dia for slip on flanges |
| 20 | For 500mm dia for slip on flanges |
| 21 | For 600mm dia for slip on flanges |
| 22 | P/F 600 mm inner dia puddle collar 10 mm thick including fixing on pipe by means of welding on complete circumferential length having outer diameter of 900mm complete in all respects. (NSI) |
| 23 | P/F 600mm dia mild steel blind plate made from MS plate 25mm thick for end of delivery header along with facing and making holes etc. |
| 24 | Making stub connection of on existing MS pipe line including cost of cutting, gas welding, labour etc. complete job |
| 25 | 100mm dia stub connection in 600mm dia pipe line |
| 26 | 400mm dia stub connection in 600mm dia pipe line |
| 27 | 600mm dia stub connection in 600mm dia pipe line |
| 28 | Providing and replacement of non-repairable double flanged DI Resilient Seated sluice valves(with cap) PN 16 according to En 1563 EN GSJ-400-15. No single part of the valve shall not be manufactured from cast iron material. The Characteristics of DI material should be as under :Resistance Strength(minimum) :400N/mm²2% 0.2 Yield Point(minimum) : 250N/mm²% Elongation(minimum) :%15Brinell Hardness Range :135-185 HBMicro Nodular Distribution(minimum) : 80pcs/mm²etc complete in all respect including the cost of loading, unloading, carriage, Nut Bolt, Rubber insertions etcMake: DVD /AVK /KIRLOSKAR /IVC /TALIS (NSI) |
| 29 | Providing and laying in position specified grade of reinforced cement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size): DSR No.5.1.2 |
| 30 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)(6.1.1) |
| 31 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm thick (As per DSR I. No. 13.9.1) |
| 32 | 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1 mm to 4 mm nominal size, laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume, including cement slurry etc. complete : |
| 33 | Dark shade pigment with ordinary cement29 x 4'-8\\" x 2'-0\\" = 270.28 Sqft or 25.11 Sqm |
| 34 | Dismantling of complete pump set along with base frame, MS reducer of delivery and suction side, cutting of reducers with the help of gas torch, dismantling of all cables, vacuum lines and taking out complete pump set out of bed for further carrying out the foundation work complete in all respect. |
| 35 | P/F of 25mm dia anchor bolts minimum 300mm long complete with double nut and washers including grouting on same with the special chemicals and drilling in concert complete in all respect to entire satisfaction EIC. |
| 36 | Refixing of complete base frame, electric motor, pump set along with rejointing MS reducer with the help of arc welding, reconnection of all cables, vacuum lines and making proper alignment of pump sets complete in all respect. |
| 37 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete (As per DSR I. No. 5.9.1) |
| 38 | Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe- 500D or more. (As per DSR I. No. 5.22.6) |
| 39 | CREDIT FOR DISMENTALED OLD PIPES AND OTHER ITEMS |
| 40 | 400mm dia meter MS Pipe |
| 41 | 500mm dia meter MS Pipe |
| 42 | 600mm dia meter MS Pipe |
| 43 | 400mm dia meter MS flange |
| 44 | 500mm dia meter MS flange |
| 45 | 600mm dia meter MS flange Please Enable Macros to View BoQ information |
