|
| 1 | 1) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 2 | a) 1:1½:3 (1 cement : 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 3 | 2) Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 4 | a) 1:5:10 (1 cement : 5 coarse sand(zone-III) including manufactured sand derived from Recycled concrete aggregate (RCA) up to 25% : 10 graded stone aggregate 40 mm nominal size including Recycled aggregate (RA)). |
| 5 | 3) Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
| 6 | 4) Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 in superstructure above plinth level up to floor V level. |
| 7 | a) Cement mortar 1:4 (1 cement :4 coarse sand) |
| 8 | 5) Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.ird course of half brick masonry. |
| 9 | 6) Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 10 | a) 250x16 mm |
| 11 | 7) Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 12 | a) 250x10 mm |
| 13 | 8) Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: |
| 14 | a) 100 mm |
| 15 | 9) Providing and laying Ceramic glazed floor tiles of size 300x300 mm(thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc.,., complete. |
| 16 | 10) Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kgper sqm including pointing the joints with white cement mixed with pigment of matching shade complete. |
| 17 | 11) 12 mm cement plaster of mix : |
| 18 | a) 1:6 (1 cement: 6 fine sand) |
| 19 | 12) 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 20 | a) 1:6 (1 cement: 6 fine sand) |
| 21 | 13) Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 22 | a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 23 | 14) Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 24 | a) Old work (one or more coats) |
| 25 | 15) Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 26 | 16) Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 27 | a) One or more coats on old work. |
| 28 | 17) Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 29 | a) With cement mortar 1:4 (1 cement : 4 fine sand). |
| 30 | 18) Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 31 | a) Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 32 | 19) Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 33 | 20) Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer in-charge |
| 34 | 21) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 35 | a) Of area 3 sq. metres and below |
| 36 | 22) Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 37 | a) For thickness of tiles 10 mm to 25 mm |
| 38 | 23) Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 39 | a) 75 to 80 mm dia pipe. |
| 40 | b) 100 mm dia pipe |
| 41 | 24) Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 42 | 25) Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 43 | 26) Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 44 | 27) Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 45 | a) W.C. pan with ISI marked white solid plastic seat and lid |
| 46 | 28) Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 47 | a) White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap |
| 48 | 29) Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 49 | 30) Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 50 | a) 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 51 | 31) Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 52 | a) 20 mm nominal outer dia. Pipes. |
| 53 | b) 25 mm nominal outer dia .Pipes. |
| 54 | 32) Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 55 | a) 25 to 40 mm nominal bore |
| 56 | 33) Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 57 | a) 30 cm length |
| 58 | (i) 15 mm nominal bore |
| 59 | 34) Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 60 | a) 15 mm nominal bore. |
| 61 | 35) Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 62 | a) 15 mm nominal bore. |
| 63 | 36) Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight RCC precast. cover with frame of 300 x300 mm size (inside) as per standard design: |
| 64 | a) 100x100 mm size P type |
| 65 | (i) With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 66 | 37) Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : |
| 67 | a) Inside size 90x80 cm and 45 cm deep including pre-cast R.C.C. manhole cover and frame (LD-2.5) Rectangular shape 600x450 mm internal dimensions internal dimensions |
| 68 | (i) With common burnt clay F.P.S. (non modular) bricks of class designation 3.5 |
| 69 | 38) Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: |
| 70 | (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. |
| 71 | (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. |
| 72 | (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. |
| 73 | (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 74 | 39) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window /Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). |
| 75 | Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variationin profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 76 | a) Frame size 65 x 100 mm |
| 77 | 40) Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 78 | a) 30 mm thick |
| 79 | 41) Dismantling 20 to 25mm dia GI pipeline incl stacking of dismantled pipes within 50m lead as per irection of Engineer in charge. |
| 80 | 42) Rebate for taking away the unserviceable water supply lines/fittings including removing from the existing position . etc., complete. |
| 81 | a) GI pipes 15mm/20mm/ 25mm/ 32mm /40mm |
| 82 | 43) Providing and fixing unplasticised Rigid PVC floor trap conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, including cost of cutting and making good the walls and floors : (a) 100 mm inlet and 75 mm outlet |
| 83 | 44) Providing & fixing Type B SWR PVC pipes by cutting, removing, replacing including jointing with 'T' shaped seal/rubber ring conforming to IS : 5382 and with solvent cement or rubber lubricant as the case may be with pipes of outer dia (concealed pipe joints to be jointed with rubber ring and solvent cement and exposed joints to be jointed with rubber ring and rubber lubricant. |
| 84 | a) 110mm diameter |
| 85 | b) 75mm diameter |
| 86 | 45) Providing & fixing sanitary fittings/ accessories with new PVC SWR fittings /accessories including cutting,replacing,jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
| 87 | a) Plain Bend |
| 88 | i) 110mm diameter |
| 89 | ii) 75mm diameter |
| 90 | b) Tee with door |
| 91 | i) 110X110X110 |
| 92 | ii) 75X75X75 |
| 93 | c) Y- with door |
| 94 | i) 110mm diameter |
| 95 | ii) 75mm diameter |
| 96 | 46) Providing and fixing CPVC ball valve in CPVC pipe line including cutting and jointing with CPVC solvent cement etc complete as per directions of Engineer in charge. |
| 97 | a) 25 mm nominal bore |
| 98 | 47) Providing and fixing 32 mm dia PVC rigid pipe for wash basin as waste pipe. The pipe shall be of length upto 600mm including P.V.C. waste fittings, P.V.C bend, union etc and fixing the pipe with clamps on wall surface, all as per site requirement, . All complete as directed by the Engineer in charge. |
| 99 | 48) Dismantling anodized aluminium partitons and other frames including proper numbering, loading and unloading and stacking by placing at the required place in the building premises etc. all operations complete as directed by the Engineer-in-charge . (Area of partition is measured for payment) |
| 100 | 49) Making and fixing anodized aluminum partitions for ventilators at all levels & heights using available materials powder coated aluminum sections , particle board, glass panels and snap on beading including fixing with rawl plug, screws or with fixing clips, or with expansion hold fasteners etc wherever required including necessary filling up of gaps at junctions at top, bottom and sides wherever required etc, all operations complete as per the directions of the Engineer-in-charge. (Aluminiu partitions, particle board, glass, gaskets and snap beading will be supplied by BSNL at no cost). Area of aluminium partition making glass/boards is measured for payment. |
| 101 | 50) Providing aluminium louvers for ventilators with operating system for required adjustment of size 450mm length and 100mm width for fixing glass etc complete as per directions of Engineer in charge. |
| 102 | 51) Charges for arranging carpenter / plumber/mason along with helper whereever required for attending minor repair works in the compound etc., complete as directed by the Engineer-in-charge.(The required fittings & fixtures exept screws/nails, drilling etc.shall be paid separately and measured for each half day) |
| 103 | 52) Cleaning of existing T- III/T-IV staff quarter at all heights by removal of cob web, pigeon droppings, debris, unwanted, un serviceable abandoned material etc from all the rooms, dusting of walls,windows, doors ,cubboards etc, washing the flooring of all rooms with detergent,washing the flooring and dado of toilets and bath room with the acid etc.,making them into useable/liveable conditions complete etc for immediate occupation of quarter as directed by Engineer-in-charge.Each quarter cleaning is measured as one job. |
| 104 | 53) Providing, laying and jointing unplasticised PVC Eco-drain unique wall structure (Number of \\"holes\\" in the wall thickness in longitudinal direction) pipes/ Manhole chambers/ Gully chambers of Type SN4 of Aashirwad Make or Equivalent conforming to IS : 16098, including joints & fittings with one step CPVC solvent cement, with solvent weld and rubber sealing rings including filling alround pipes up to required thickness with Stone dust/ robo sand/ river sand & testing of joints complete as per direction of Engineer in Charge. |
| 105 | a) Pipes |
| 106 | i) 160 mm diameter |
| 107 | 54) Providing and fixing PTMT health faucet with PVC pipe including holder complete etc., as directed by the Engineer-in-charge. |
| 108 | 55) Providing and fixing C.P. brass two in one bib cock 15 mm nominal bore. of approved quality conforming to IS:8931: complete etc., as directed by the Engineer-in-charge Please Enable Macros to View BoQ information |
