|
| 1 | Earth work in excavation of foundation for structures for bridge in all depths as per drawing and MoRTH technical specification section 300 and clause 304 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal in all leads and lifts including dressing of sides and bottom and back filling in trenches with excavated suitable materials. All work of rock cutting by blasting shall be carried out by taking all necessary precautions against soil erosion damage to hill side water pollution etc. and to protect stability of hill side rock shall be excavated with chiselling and wedging out rock (where blasting is prohibited). All earth work in cutting/excavation including rock excavation shall be carried out true to lines, grades, side slopes, width, camber super elevation and levels as shown on the drawings or as directed by the Engineer-in-Charge hauling and stacking of materials useful for construction at suitable sites and safe disposal of unsuitable cut materials in specified manner filling of unevenness blind age and finishing of the road to specified dimension or as directed by the Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 2 | Providing and laying concrete mechanically mixed and vibrated mix for plain/reinforced cement concrete grade M-15 (Fifteen) in open foundation as per drawing and MoRTH technical specification Section 1500, 1700 & 2100 including carriage of materials with-in all leads and lifts and other incidental and as per entire satisfaction and direction of Engineer-in-Charge. The rate is including octroi, royality, Malkana, toll tax or any other imposed by the Government but excluding GST. |
| 3 | Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-30 (thirty) in foundation including form works but excluding reinforcement in any height complete as per drawing and technical specifications and curing complete as per MoRTH Section 1500, 1700 and 2100. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST within all leads, lifts carriage of material and other incidentals as per entire satisfaction and direction of the Engineer-in-Charge. |
| 4 | Supplying, fitting and placing un-coated HYSD bar reinforcement in foundation complete as per drawing and MORTH technical specifications Section 1600 & 2100 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 5 | Providing and laying mechanically mixed and vibrated reinforced cement concrete Grade M-35 (thirty five) in sub structure including form works but excluding reinforcement in any height complete as per drawing and technical specifications and curing complete as per MoRTH Section 1500, 1700 and 2200. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST within all leads, lifts carriage of material and other incidentals as per entire satisfaction and direction of the Engineer-in-Charge. |
| 6 | Supplying, fitting and placing HYSD bar reinforcement in substructure complete as per drawing and MORTH technical specifications Section 1600 & 2200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 7 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification clause 710.1.4 of IRC: 78 and 2504 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 8 | Supplying, fitting and fixing in position true to line and level POT-PTFE bearing consisting of a metal piston supported by a disc or unreinforced elastomer confined within a metal cylinder, sealing rings, dust seals, PTFE surface sliding against stainless steel mating surface, complete assembly to be of cast steel/fabricated structural steel, metal and elastomer elements to be as per IRC: 83 part-I & II respectively and other parts conforming to BS: 5400, section 9.1 & 9.2 and clause 2006 of MoRTH Specifications complete as per drawing and approved Technical Specifications section 2000 & clause 2200 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 9 | Furnishing and Placing Reinforced/Prestressed cement concrete in super-structure RCC Grade M50 (Fifty) for any height, as per drawing and MORTH technical specifications section 1500, 1700 & 2300 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 10 | PCC M15 (Fifteen) Grade leveling course below approach slab complete as per drawing and Technical specifications clause 2700 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 11 | Providing and laying reinforced cement concrete grade M-30 (thirty) in approach slab including reinforcement and formwork complete as per drawing and Technical specifications as per MoRTH Section 1500, 1600, 1700 and clause 2704 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 12 | Supplying, fitting and placing HYSD bar Reinforcement in superstructureas per drawing and technical specifications as per MoRTH Section 1600 & 2300 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 13 | High tensile steel wires/strands including all accessories for stressing, stressing operations and grouting complete as per drawing and MoRTH Technical Specifications section 1800 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 14 | Providing and laying Cement concrete wearing coat M-30 (Thity) grade including reinforcement complete as per drawing and MORTH Technical Specifications section 2702 and as per the direction of the Engineer-in-Charge including the cost of form work and carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 15 | Drainage Spouts with G.I (Galvanized Iron) pipe 100 mm dia (One hundred millimetre diametre) complete as per drawing and Technical specifications section 2705 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including octroi, Royality, Malkana, toll tax, or other taxes imposed by the Government but excluding GST. |
| 16 | Strip Seal Expansion Joint (Providing and laying of a strip seal expansion joint catering to maximum horizontal movement upto 70 mm (Seventy millimetre), complete as per approved drawings and standard specifications to be installed by the manufacturer/supplier or their authorised representative ensuring compliance to the manufacturer's instructions for installation.)as per drawing and MORTH Technical specification section 2607 as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 17 | Provision of an RCC (Reinforced cement concrete) crash barrier at the edges of the road, approaches to bridge structures and medians, constructed with M-20 grade concrete with HYSD reinforcement conforming MoRT&H Specification clause 2703 and as per details given IRC:5 including dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH - 33022/1/94-DO III dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 18 | Construction of RCC railing of M30 (thirty) grade cast-in-situ with 20 mm (twenty millimeter) nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500 (one in five hundred), centre to centre spacing between vertical post not to exceed 2000 mm (two thousand millimeter), leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications as per MoRTH clause 2703 and section 1600, 1500 and 1700 including the cost of form work and carriage of material within all leads, lifts, as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 19 | Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drain and Parapets etcetra in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rock chiseling/wedging out rocks (Where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 and as per direction of the Engineer-in-Charge including setting out, construction of shoring, bracing, removal of stumps and other deleterious materials and disposal of materials upto any leads and lifts including dressing of sides, bottom and back filling in trenches with excavated suitable approved material to the original surface in layer not executing 150 mm (one hundred fifty millimetre) compacted thickness including shoring, strutting, pumping and bailing out water (surface and sub soil water) upto any depth any quantum of water including cleaning of slush which may arise out during dewatering complete as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 20 | Providing and laying concrete mechanically mixed and vibrated mix 1:4:8 (one cement: four sand: eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size) for plain/reinforced concrete in foundation and plinths or similar works complete as per drawings and MoRD technical specification section 800, 900, 1200 & 1600 and curing complete including the cost of form work and hauling of material within all leads and lifts as per the entire satisfaction and direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 21 | Back filling with granular material behind abutments, wing walls, return walls and retaining walls complete as per drawing and MORD technical specifications section 1200, 1600 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 22 | Providing and laying 100mm dia (One Hundred millimetre diametre) PVC pipe weep holes in brick masonry/stone masonry, plain reinforced concrete, abutments, wing walls, return walls and retaining/breast walls extended through the full width of the structure with slope 1 (V):20 (H) (One vertical : Twenty Horizontal) towards draining face complete as per drawing and MORD technical specification section 700, 1200 and as per direction of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 23 | Loosening of the ground upto a level of 300 mm (three hundred millimetres) below the subgrade level, watered, graded with motor grader and compacted in layers to meet requirement of Tables 300. 1 and 300. 2 of MORD with three wheel 80-100 kN (eighty to one hundred kiloNewton) static roller for subgrade construction as per MORD Technical Specification section 300 as per direction of Engineer-in-Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 24 | Construction of Granular Sub-Base (Grade-1) by providing well graded materials, spreading in uniform layers with tractor mount grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with three Wheel 80-100 kN (Eighty-hundred kilonewton) static roller to achieve the desired density, complete as per MORD Technical Specification section 400 for grading-I Material, as per the entire satisfaction and directions of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 25 | Providing and laying, spreading and compacting graded stone aggregate to wet mix macadam 150 mm (One hundred Fifty millimetre) thick specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub- base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN (eighty to hundred kilo newton) weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per MORD Technical Specification section 400 as per direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government excluding GST. |
| 26 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm (Zero point Eighty Five kilogramme per square meter) using mechanical means as per MORD Technical specification clause 502 including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 27 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.275 kg/sqm (zero point two hundred seventy five kilogramme per square meter) on the prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification clause 503 including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 28 | Providing and laying bituminous macadam with 40-60 TPH hot mix plant producing an average output of 50 (Fifty) tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder @ 3.3 percent of mix, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compactionas per MORTH specification clause No. 504 complete in all respects & direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 29 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg/sqm (zero point two hundred twenty five kilogramme per square meter) on the prepared bituminous surface cleaned with Hydraulic broom as per MORD technical specification clause 503 including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction of Engineer-in-Charge. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 30 | Providing and laying bituminous concrete 40-60 TPH batch type hot mix plant producing an average output of 50 (Fifty) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5 per cent of mix and filler, with anti stripping agent zycotherm @ 0.1 percent by weight bitumen or equivalent transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects & direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate is including Octroi, Royalty, Malkana, Toll Tax or any other imposed by the Government but excluding GST. |
| 31 | Providing and erecting W metal beam crash barrier comprising 3 mm (three millimetre) thick corrugated sheet metal beam rail 70 cm (seventy centimetre) above road/ground level fixed on ISMC series Channel vertical part of 150 mmx75 mmx 5 mm (one hundred fifty millimetre into seventy five millimetre into five millimetre) special 2. 00 (two point zero zero) metre centre to centre 1.80 (one point eight zero) metre high 1.10 (one point one zero) metre below ground road level all steel parts and filaments to be galvanized by hot dip process, a fitting to confirm to IS:1367 and IS:1364 metal beam rail to be fixed on the vertical post with a space of channel section 150 mmx75 mmx5 mm (one hundred fifty millimetre into seventy five millimetre into five millimetre) 330mm (three hundred thirty millimetre) long complete as per MORTH Specification section 800 & clause 811 including hauling of materials in all leads and lifts as per entire satisfaction and direction of Engineer-in- Charge. The rate is including Octroi, Royality, Malkana, Toll Tax or any other Taxes imposed by the Government but excluding GST. |
| 32 | Preparation of detail design of substructure and superstructure and approved from IIT/NIT i.e @0.50% of Bridge cost = 8,61,44,333X0.50% = Please Enable Macros to View BoQ information |
