|
| 1 | Cement Concrete 1:2:4 with stone ballast or shingle.mixing by manual means |
| 2 | 115 mm thick brick wall laid in cement sand mortar 1:4 without reinforcement in super structure. |
| 3 | Screed of 50mm thick cement concrete 1:8:16 to be laid below the topping. |
| 4 | Extra for pre finished nosing to treads of steps of marble stone. ( Full gola, half round gola etc.) |
| 5 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 6 | Chowkhats of Yellow meranti Sinker (20 to 21 kg per cft. Approx.) confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc, complete fixed in position Single Rebate (60mm x 100mm) |
| 7 | Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position (Code : IS 2202-1 (1999)) Decorative with teak facing on both sides edges lipped with teak with laminated core 35mm thick |
| 8 | Providing ,laying, jointing, fixing and testing ISI Marked G.I. Pipe (as per IS 1239) B-Class Premium make such as (Jindal Hisar) including cost of specials (such as tees, bends, sockets, elbows etc.) ,painting with anti corrosive bitumastic paint, testing, cutting, threading Inside building complete. |
| 9 | 15mm i/d |
| 10 | 20mm i/d |
| 11 | Providing, fixing and jointing G.I Union Couplings(of approved make with the approval of EIC) as per IS 1879 in G.I. Pipe lines complete in all respect. |
| 12 | 15mm i/d G.I. Union |
| 13 | 20mm i/d G.I. Union |
| 14 | Providing, fixing and jointing ISI Marked Gun-Metal peet valves (Heavy Pattern) as per IS 778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. |
| 15 | 15mm i/d Gun Metal peet valve heavy pattern. |
| 16 | Making connection with the existing G.I. branch main up to 40mm size pipe including cutting of existing pipe line, threading of pipe lines from both ends and fixing of G.I Tee etc. in the pipe line (including cost of G.I Tee) complete in all respects. |
| 17 | Cutting holes up to 23 cm square through B.B. in cement walls or stone masonry wall in cement for pipes, and making good the same & finishing according to existing finish where required. |
| 18 | (b) Through wall 22.86 cm thick |
| 19 | Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect. |
| 20 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 21 | mixing by manual means |
| 22 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect |
| 23 | Rectangular Sink with Deluxe Border Single Bowl Overall Size 700 mm x 555 mm x 230 mm |
| 24 | Providing and fixing in position 32 mm dia G.I waste pipe embedded in wall upto floor level including cost of fittings complete as required by the Engineer-in-charge. |
| 25 | Providing and fixing in position C.P. Acrylic shelf with C.P.bracket and guard rails of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs and C.P brass screws complete in all respect. |
| 26 | CP brass Acrylic Shelf size 560mmx130mm |
| 27 | C.P. brass Glass Corner with rail 8 mm thickness and height 250 mm |
| 28 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 29 | Providing & Fixing in position mirror of superior glass Size 1500mm x600mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50mm size (of approved quality and shade) with 4mm thick hardboard backing fixed in with rawl plugs 50mm, C.P. brass screws and washers complete in all respect |
| 30 | Providing & Fixing in position C.P. Brass extension piece 25mm long to 50mm long of approved make (to the approval of Engineer-in-charge ) with various fixtures complete in all respect. |
| 31 | C.P. Brass extension piece, 25mm long to 50mm long |
| 32 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 33 | Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 34 | C.P. brass liquid soap container |
| 35 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 36 | C.P. Brass fittings: |
| 37 | C.P. brass Bib cock with wall flange |
| 38 | C.P.brass 15mm Angular stop cock with Wall flange |
| 39 | C.P. brass 15mm Concealed stop cock with adjustable wall flangewith seal.(Outer +Inner Body) |
| 40 | C.P. Brass Accessories: |
| 41 | C.P brass towel ring square |
| 42 | C.P. brass toilet roll holder with flap |
| 43 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 44 | (c) PVC tube connection of size 15 mm x 300 mm with PTMT nut |
| 45 | Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes as per IS -13592 of approved make (to the approval of Engineer-in-charge) including cutting, jointing, wastage, but excluding cost of lead jointing. |
| 46 | Type B |
| 47 | 110mm o/d SWR UPVC pipe line laid complete |
| 48 | 90mm o/d SWR UPVC pipe line laid complete |
| 49 | Providing and fixing in position S.S. Grating with frame of approved make (to the approval of Engineer-in-charge) complete in all respect (Previously item no.30.104) |
| 50 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 51 | Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes line and making good the same to its original condition. |
| 52 | Size 75 mm x 75 mm |
| 53 | Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge. |
| 54 | Eurpoean/Indian/Orissa W.C., |
| 55 | PVC / China Ware Cistern |
| 56 | Wash Hand Basin / Urinal Pot |
| 57 | CP Bib Cock/Angle Cock/Stop Cock/ Shower/ Bottle Trap |
| 58 | Wall mixer / Sink Mixer / Basin Mixer / Concealed Stop Cock |
| 59 | Bathroom Assessories such as Soap Dish, Towel Rail, Towel Ring, Towel Bracket, Mirror, Toilet Paper Holder, Seat Cover, Jet Pressure and all other accessories. |
| 60 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 61 | Dismantling of floor tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 62 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590 mm of approved make (to the approval of the Engineer-in-charge) consisting of C.P. brass Urinal waste Coupling dome type 32mm outer length 75 mm , C.P. brass Urinal Spreader Ocular-Regular and C.P. brass tube connection 300 mm long complete |
| 63 | Providing and fixing partition for different type of urinals. Toughned Glass Partition 8mm thickness size 450 x 900 mm C/S |
| 64 | Providing and fixing Wall Hung EWC Seat of Jaquar Make (Cat No.ARS-WHT-39953BIUFSM) including Viking Bolts, with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge |
| 65 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of Nitco/Somani/Kajaria or any other equivalent make or any other reputed make in all colours, shades except burgundy, bottle green, black of size 600x1200mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 25 mm thick bed of cement Mortar 1:2 (1 cement: 2 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 66 | Providing and laying vitrified floor tiles of size 600x600mm in light/dark/mossaq colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) |
| 67 | Providing and fixing PVC Floor trap 3\\" i/c i/c CC Block 1 : 2 : 4 complete in all respects. |
| 68 | Providing and fixing PVC Off set 4\\" complete in all respects. |
| 69 | Providing and fixing in position Table top basin of Jaquar make (Cat. No. LAS-WHT-91905) including labour and material complete in all respect. |
| 70 | Providing and fixing in position Table top basin of Jaquar make (Cat. No. CNS-WHT-903) including labour and material complete in all respect. |
| 71 | Providing and fixing in position Single Lever Pillar cock Jaquar make (to the approval of Engineer-in-charge) complete in all respect. |
| 72 | Providing & Fixing in position Vanity of approved make for Wash Hand Basin including labour and all necessary fittings complete in all respects |
| 73 | Providing and fixing in position C.P. Waste 6\\" long Jaquar make Allied model (Cat. No. ALD-CHR - 709) complete in all respect. |
| 74 | Making provision for making wall hung complete in all respect |
| 75 | Construction of RCC slab of 4'-0\\" x 2'-0\\" size complete in all respect. |
| 76 | Construction of RCC slab of 7'-5\\" x 2'-0\\" size complete in all respect. |
| 77 | Providing and fixing PVC socket 4\\" complete in all respects. |
| 78 | Providing and fixing PVC socket 3\\" complete in all respects. |
| 79 | Providing and fixing health faucet of jaquar make complete in all respect |
| 80 | Carriage of Malba from site of work to dumping ground. |
| 81 | Rebate on old material Please Enable Macros to View BoQ information |
