|
| 1 | Demolition of Unreinforced Cement Concrete of any description and in any position not otherwise specifically provided for incl removal of debris etc complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete in ground floors and paving not exceeding 15 cm thickness( below or above ground level) (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 3 | Demolition of concrete block walling, brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles etc complete all specified and directed. |
| 4 | Taking down cement plaster on Brick/Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish of the MD Land complete all as directed and directed |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 6 | M&L for broken stone or boulders Hard core of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick watered and well rammed to a true surface complete all as specified and directed. |
| 7 | M & L for PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed |
| 8 | M&L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) as in sub base of flooing etc complete all as specified and as directed |
| 9 | M&L for coloured machine pressed pre-cast concrete interlocking paver block of any size and shape conforming to IS-15658-2006 of 60mm thickness M-35 grade with grey cement and pigment laid over sand cushioning etc including dismantling of existing complete all as specified and directed.Note Sand filling/cousning shall be measure and paid separately. |
| 10 | M & L for coloured machine pressed pre-cast concrete interlocking paver block of any size and shape conforming to IS-15658-2006 of 80mm thickness M-40 grade with grey cement and pigment laid over sand cushioning etc including dismantling of existing complete all as specified and directed. |
| 11 | M & L for stone dust or sand filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and compacted/rammed to a true surface for laying interlocking blocks including watering etc complete all as specified and directed.Note : compacted thickness shall be measured and paid separately |
| 12 | M&L for chequered cement concrete tiles 40CmX40CmX30 mm thick, machine pressed, (with grey cement & no pigments), set jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bedding layers in CM 1:6 including dismantling of existing and dispose off debries where directed complete all as specified & directed |
| 13 | M&L for chequered cement concrete tiles 30CmX30CmX25 mm thick, machine pressed,(with grey cement & pigments), set jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bedding layers in CM 1:6 including dismantling of existing and dispose off debries where directed complete all as specified & directed |
| 14 | M&L for providing precast cement concrete block masonary with solid blocks exc 10 cm width, type C-1 (1:3:6) using 20mm graded aggregate and set in cement mortar (1:6) complete all as specified and directed. |
| 15 | Description all as per item No.14 herein before but except precast blocks masonryNote : Old precast blocks obtained from item No 3 shall be re-used. |
| 16 | M & L for walling of random rubble, masonary uncoursed, well bonded, bedded and solidly hearted built in cement mortar 1: 6 all as specified and directed. |
| 17 | Description all as per item No. 16 herein before but except stone complete all as specified and directedNote : Old Stone obtained from demolition will be re-sued. |
| 18 | M & L Flush pointing to block in course or ashlar masonry on concrete block walling in CM 1:4 complete all specified and directed |
| 19 | M& L for rendering 15 mm thick in cm (1:4) on fair faces of concrete surfaces or block masonry work and finished even and smooth without using extra cement including necessary scafolding and safety measures as required complete all as specified and directed. |
| 20 | M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregate) set in cement mortar (1:6) work for landings, cover slabs, manholes, chajjas, water troughs, manger shleves and similar articles with plain faces complete all as specified and as directed |
| 21 | M&L mild steel TMT bars 10mm dia and over cut to length bent shape as required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-410-S complete all as specified and as directed |
| 22 | S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 23 | M&L for preperation of new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed. |
| 24 | Demolition of kerb stone of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 25 | M &L for laying at or near ground level factory made kerbstone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves ( thickness of joints except sharp curve shall not to more than 5mm), including making drainage opening where required complete all as specified and directed. |
| 26 | M&L for preparation of newly plastered or concrete surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed. |
| 27 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed. |
| 28 | M&L for 18-20mm thick Sadherhali stone slab flooring, steps, jambs, pillars, window- cills, steps/stairs, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granit including 15 mm thick screed bed in CM 1:4 and Rounding to edges complete all as specified and directed. |
| 29 | M&L for Plain cement concrete type C-2 , 1:3:6 using 40mm graded stone aggregate as in surface channel and drains including necessary formwork complete all as specified and directed. Please Enable Macros to View BoQ information |
