|
| 1 | Providing and applying tack coat using bitumen emulsion conforming to IS: 8887, using emulsion pressure distributer including preparing the surface and cleaning with mechanical broom. With rapid setting bitumen emulsion On W.B.M. /W.M.M. @ 0.4 Kg/sqm. |
| 2 | Providing and laying 50mm thick bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer in charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch /Drum Type Hot Mix Plant of 100-120 TPH /60-90 TPH capacity Complete. |
| 3 | Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Batch /Drum Type Hot Mix Plant of 100-120 TPH /60-90 TPH capacity Complete. |
| 4 | Providing and laying seal coat of premixed fine agg. (Passing 2.36mm and retained on 180 micron sieve) with bitumen using 128 Kgs, of bitumen of grade VG - 10 bitumen per Cum of fine aggregate and 0.60 Cum of fine aggregate per 100 Sqm of road surface including rolling and finishing with road all complete Incld: all carriages |
| 5 | Providing, laying, spreading and compacting 75 mm thick graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge including all leads, lifts, loading, unloading carriage of all materials Complete |
| 6 | P/L of Ms pipes 8`` in proper position/ grade including cutting of road surface upto required depth providing reqisite cushion including carriage of all |
| 7 | Protection Work at different spots |
| 8 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches forfoundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil : |
| 9 | Providing and laying of stone soling nallah (hand packed) including compacting in foundation trenches. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 11 | Centring and shuttring incld.strutting proping and removal of form work for foundation founting bases of columns all work upto pilnth level |
| 12 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | 40mm thick cement concrete flooring in 1 :2:4 mix incld: curing using 20mm nominal size of crushed stone agg: with floating neat cement slurry incld: cost and carriage of all material involved complete |
| 14 | Providing/fixing of 75mm dia PVC Weep holes in proper line and gradient complete Job |
| 15 | Carriage of matyerial from source to site of work incld: loading/unloading etc complete |
| 16 | Sand for an avg lead of 15 kms |
| 17 | Stone agg for an avg lead of 15 Kms Please Enable Macros to View BoQ information |
