|
| 1 | Dismantling of old and Damage Brick work including Stacking of Materials. SI. No. 692 |
| 2 | Exacavation in foundation in ordinarry soiel. [SI.No.273] |
| 3 | Laying base concrete in 1:6:12 c/fs/bb mortar[SI.No.273] |
| 4 | RCC work in 1:1:5:4 c/cs/sg mortar. (Column) [SI.No.289] |
| 5 | RCC work in 1:2:4 c/cs/sg mortar (beam) [SI.No.285] |
| 6 | MS or iron work such as reinforecement |
| 7 | M&150 class Brick work in foundation in 1:4 mortar 1cement and 4 coars sand complete all work.{[SI.No.305] |
| 8 | M&150 class Brick work in superstructure in 1:4 mortar 1cement and 4 coars sand complete all work.{[SI.No.309] |
| 9 | 12mm thick Plaster in 1:4 c/cs mortar[SI.no.584a] |
| 10 | Earth work in Filling with ordinary soil including soil in |
| 11 | Providing and fixing MS iron gate & Grill of mild steel Tee-sections Square bars, joint mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steek primer |
| 12 | S/L 80 thick interlocking tile complete work all complete with T&P etc. [SI.No.1, new item 14 ch.no.20] |
| 13 | Disposal of surplus dismantled material up to 2 kms.[SI.no.231a] |
| 14 | S/Fixing of statue with padustell all work complete with T&P.etc |
| 15 | Providing wall puttu on new surface [SI.No.662 new item] |
| 16 | Finishing wall with water proof cement paint [SI.No.662 new item] |
| 17 | Painting work [SI.No.641+643] |
| 18 | Supply and installation of Decorative Ornamental Pole Totalheight of the pole shall be 4.5 m nominal above the ground The pole is made out of grooved mild steel tube and castIron in two steps Cast Iron embellishments are fitted with the help of provided to accommodate a 6amp SP MCB and 32 amp heavy duty connector for mains conection in the bottom part of the pole as shown in attached drawing The different section of the pole are joinded together by means of welded ioints MS Pipe power coating the decorative pole Shall be machined and Polish properly to give it a smooth surface. The Decorative Pole is duly pre-treated by shot Blasting Process and Painted in U.V. rav resistant PU Coating in approved colour shade. Decorative pole shall be installed at desired location Including foundation of the pole by main Cement Concrete foundation of 1:2:3 (1 Cement: 3 Course sand 6 Rated stone aggregate 40 mm nominal size with the help of anchor bolts and 38 min G.L. sleeve complete in all respect as required. (Make: Phillips.Crompton/Wipro Twinkle Lite)S/Fixing decorative ornamental pole hight up to 4.5 M nominal above the ground, made of grooved mild steel tuhe and.cast |
| 19 | mild steel tuhe and cast Supply and Installation of 72-84 W, LED based Decorative Luminaire. The Luminaire is made of Spun Aluminium A Polycarbonate Diffuser shall be fitted in the Luminaire. Luminaries should be IP 67, IK 08 rated Integrated suitable BIS approved LED Driver shall be fitted inside, luminous efficacy more than 120lm/W total more than 9000 lumens,the Led Post top light having efficiency> 85%, power factor shall be > 0.9. THD <=IOP> with driver standard voltage withstand range of 100-300 V AC and inbuilt surge protection of Min. 4 kv. Theluminarie shall have external surge protection device of IOkV.A Suitable Led Driver shall be Fitted inside the Luminaire. The Luminaire body should be machined and polished properly to give it a smooth surface. The Luminaire shall be Suitable for the fitment on the required Single are brackets. The Luminaire shall be duty pre-treated and painted in U.V. rav resistant polyurethane paint in approved colour shade. A two way connector is provided for the mains connections. The Luminaire is suitable for 240v, single phase, AC, Decorative Luminaire shall be installed at the desired location on the Double arm brackets equivalent to (MakPhillips/ Crompton/Wipro/Twinkle Light) |
| 20 | Supply and instalation of decorative single arm bracket the decorative bracket is made of mild steel cast iron and alluminium the mild steel cast iron and alumistum part are Joined together & are fabricated to design. The bracket shall be machined and pollished properly ghe it proper smooth surface. The decorative bracket is dully prepared by shot blasting process painted in UV PL. zoating in appproved colour shade. The decorative bracket should hav arrangment suitable to be fitte on the required pole compleate in all respect. |
| 21 | Supply and laying of alluminium PVC insulated armoured served sheathed cables 1100 volts grade at drpth of 750 mm bellow ground levei aver a cushion of 75 mm thick sand all arround and protected with burnt bricks on side and on top. On the surface the cable shall be fixed on MS clamps etc of suitable size of as directed by the Engineer-In-Charge 10 sq mm x4 core OWD SOR 2017-18 S No 501.(b) Labour Charges. |
| 22 | Providing and fixing 6 SWG dia GI wire on surface or in exces for loop carthing along with existing surface/recessed conduct/submain wiring/cable as required. |
| 23 | S/F and following capacity of automatic street lightcubicle control pannel painted with anticorossive alkali and acid proof paint consisting of time switch TSO 100 series with contractor, HRS Fuse isolating switch metering instrument & instrument box with CTs etc in case of TPN, Comleate in all respect40 A SPN PWD SOR 2017-18 SNo.807 (c)II |
| 24 | S/Burring of sale earthing electrode T-19 Zn Zinc coated lenth up to 2000 mm outer pipe 48.4x3.2 mm,inner pipe 26.9mmx2.6 mm terminal dia 12 mm,coating 80-100 micron folled with crystallin conductive mixture (CCM) having anticorossive &conductive with properlywith50 kgs. activated soiel (BFC) capable of reducing the coll resistivitywith good mixture of retaing capacity along with 30 cm squarare C.I. frame with hinged cover &masonary housing.(Frome electrode terminal to switch board.cost of 25x3 G.I. stin will he Make as approved in up pwd cpri certified pwd SOR 2017-18 SI 725-B |
| 25 | Providing and fixing 25mmx5mm G.L. striff in 40 mm dia G.L.pipe from earth electrode including connecon with GL eut.bolt.spring. washer excavation and refilling etc as required. |
| 26 | Supplying and laying of followong size DWC HDPE pipe ISI Marked along with all accessories like sockets bends.couplers etc.confirming tols 14930.part licompleate with fitting and cutting.jointing etc.compleate as required 63mm dia (od-63 mm&ID 51mm nominal). |
| 27 | Supplying and fixing of plain type copper cable socket (Lug)S.No.504. |
| 28 | Supply and wiring of submains with two nos of 2.5 sq.mm FR PVC insulated 1100 V grade single ccore multistrand copper conductor cable in existing conducter compleate with supply of all material labour and T&P required for proper compleation of work as directed at site by Engineer in charge.PWD SOR 2014 S.L.No.289 |
| 29 | Electric fitting as per necessaryof site |
| 30 | Grass rooting all work complete |
| 31 | Child friendly equipments all work complete. |
| 32 | S/Fixing of park benches all work complete. |
| 33 | Plantation & Horticulture all work complete. bogen beliya |
| 34 | faicus |
| 35 | saycus |
| 36 | unifrass |
| 37 | labour charge |
| 38 | S/Fixing of LED Decorative bollard light all work complete. |
| 39 | S/F Fixing of 1.5 mm wire all work complete |
| 40 | fixing of main switch with box all work complete |
| 41 | S/F of Naming sign board at site |
| 42 | cleaning of site during work dismanting ramps photo of site Please Enable Macros to View BoQ information |