|
| 1 | Dismantling existing plaster including disposal of refuse as directed by the Engineer-in-charge within a distance of 60 metre (200 feet). (DSR15.56 ) |
| 2 | Scraping old painted surface inculding disposal of all scraped material to distance of 30 Meters (200 ft) as dirceted by Engineer in charge (DSR.N.13.88) |
| 3 | M.S. or iron work of small sizes and section such as MS gril holding down bolts, hold fast, tie rods grating etc. wrought to required from including supply of steel bolts, nuts wastage etc. and their fixing required for proper completion of the work. For varandha closing (DSR.N.10.1) |
| 4 | Supply & fixing of Indian Commercial flush shutters 35 mm. thick including supply & fixing of wooden cleats and stops and including fixing & adjustment of hinges, bolts, locks, handles spring and or other fittings also including their supply and including painting with two coats of black Japan on all iron fitting if necessary.(DSR.N.9.21.1) |
| 5 | 12 cm thick plaster with cement and corse sand of 1.25 fineness modules in 1:4 over brick work minimum thickness not to be less than 1cm. including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (DSR.N.13.4) |
| 6 | Providing wall putty on old surface with approved quality material of Berger/J.K./Birla or similar make 2 coats (DSR.N.13.8) |
| 7 | Supply and fixing Galvanized Mosquitos proof heavy quality iron wire gauge or expended metal heavy quality over windows and including supply of of C.P. teak wood batten 8 cmx1cm.(3''x3/8'')/Flat iron 25 mmx4mm and including supply of all materials labour Tool & plants etc. required for proper completion of the work.(DSR.N.9.51.1) |
| 8 | Providing and fixing Glass panes with teak wood beading in doors and windows as desired by the Engineer incharge including cost of all materials, fittings, hinges, labour, T&P all etc. required for proper completion of the work.(DSR.N.9.9.1.2) |
| 9 | Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of (SI No 9.88) |
| 10 | Providing and fixing aluminium handles lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: (DSR.No 9.100.1) |
| 11 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or byed to required colour or shade with necessary screws etc complete (DSR.N 9.97.1) |
| 12 | Providing and laying ivory or light shad vitrefied tiles in different size in flooring or skirting finishing with cement slurry and with pigment grouting and polishing complete including supply of all matrials labour T&P etc. requred for porper completion of works, (DSR.N.11.47.2) |
| 13 | Painting or varnishing work in small areas or new wood work with two coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. (DSR.N.13.58) |
| 14 | Distempering two coats with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (DSR.N.13.41.1) |
| 15 | Finishing wall with water proof weather coat of approved make and quality on new work with two coat to give an even shade including supply of all materials, labour, Tools & plant etc. required for proper completion of the work (DSR.N.13.44.1) |
| 16 | P/L ( white coloured ) kajaria tiles, Romano tiles 300X300mm or more over walls or in flooring over 20 mm thick base of cement mortar in 1:4( one cement : 4Coarsened Lead and Jointed with white cement with pigment slurry including ribbing and polishing complete in all respected complete (DSR.N.11.37) |
| 17 | Providing and fixing water closet squattaing white Vitreous china Orissa pattern W.C. pan of size 580x440mm Hindware or Equivalent with integral type foot rests and 1 piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white 5 litre P.V.C. automatic flushing cistern, with fitting, standard size G.I. flush pipe for back and front flush with standard spreader pipes with fittings, G.I. clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required (DSRN.17.1.1) |
| 18 | Supply and fixing of CP brass bib cock/stop cock including supply of all material labour T&P etc complete (DSR.N.18.49.1) |
| 19 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet and 150mm diameter DSR No. 18.22.2 |
| 20 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps(DSR17.7.1) |
| 21 | Supply and fixing of mirror of atul make with indian polish of 600x450 mm dia size with bevelled edge including hard board sheet for mirror with clips & glass self 7/32'' thick 600x357mm size with cp gurd ail of standerd size and brakets (DSR.17.32.2) |
| 22 | Providing and fixing PTMT towel rail complete with brachkets fixed to wooden cleats with C.P. brass screws with concealed fittings arrangement of approved quality and colour. (DSR No. 17.73) DSR no. 17.73.2 600mm long tower rail with total length of 645mm, width 78 mm and effective height of 88mm, weighing not less than 190 gms. |
| 23 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required Range of three squatting plates with 10 litre P.V.C (DSR 17.6.3) automatic flushing cistern |
| 24 | Providing & Fixing Satinless steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets, and stainless steel plug 40mm including painting the fittings and bracket cutting and making good the walls wherever required. Kitchen sink with drain borad 510x1040mm bowl depth 250mm (DSR No. 17.10.1.1) |
| 25 | providing and placing on terrace (at all floor levels)polyethylene water storage tank.IS:12701 marked with cover and suitable locking arrangement and making necessary hole for inlet,outlet and overflow pipe but without fittings and the base supports for the tank as DSR.N.18.48 |
| 26 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing,curing and polishing etc. all complete as specified and as directed bythe Engineer-in-Charge a. Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent (DSR No 8.2.1.2) |
| 27 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 15mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR.N.18.9.1) |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20mm dia having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (DSR.N.18.9.2) |
| 29 | Supply and fixing of 110 mm dia PVC pipe including supply of all materil labour T&P etc complete (DSR.N.12.41.2) |
| 30 | Supply and fixing of 75 mm dia PVC pipe including supply of all materil labour T&P etc complete (DSR.N.12.41.1) |
| 31 | Providing and laying intergral cement based water proofing treatment including prepration of surface as required for tretment of roofs,balconies etc.all same as DSR.N.22.7 to 22.7.1 |
| 32 | Providing and fixing 15mm dia CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (DSR-17.22b) |
| 33 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:2;4 in lintels of door & windows excluding supply of reinforcement and its bending, but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. (DSR.N.5.1.3) |
| 34 | M.S. (tor steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire.DSR.N.5.22A |
| 35 | Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polimer coated J or L hooks,bolts and nuts 8mm diameter with bitumen and G.I limpet washera all same as DSR No 12.1.1 |
| 36 | Providing & fixing UV stabillised fiberglass reinforced plastic shrrt roofing up to any pitch,including fixing with polymer coated J or L hooks,bolts & nuts 8mm dia all same DSR.No.12.47.1 Please Enable Macros to View BoQ information |