|
| 1 | Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm. |
| 2 | Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead. |
| 3 | Dismantling doors, windows and clearestory windows (steel or wood) shutters including chowkhats architrave holdfast etc. complete and staking within 50 mt. Lead (a)Of area 3 sq.m. and below |
| 4 | Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within 50 mts. lead |
| 5 | Dismantling wooden boarding in linings of walls & partitions excluding supporting members but including stacking within 50 meters lead. Thickness above 19mm and upto 25mm |
| 6 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 mts. lead. |
| 7 | Demolishing cement concrete 1:3:6 or richer mix including disposal of material within 50 m lead |
| 8 | Dismantling steelwork in single sections in channels, angles, tees and flats including dismembering and stacking within 50 mts. lead |
| 9 | Dismantling of existing sanitary fitting of all size including disposal of dismantled materials from site or as per direction of Enginneer -in- charge. |
| 10 | Disconnecting damaged overhead PVC water storage tank of any size from water supply line and removing from the loft including shifting at ground level as per direction of Engineer -in-charge. |
| 11 | TRANSPORTATION AND CARRIAGE OF MATERIALS (C) Manual labour including loading, unloading and stacking for lead less than .50km, murrum building rubbish |
| 12 | TRANSPORTATION AND CARRIAGE OF MATERIALS (A) By tipper truck including loading, unloading and stacking upto lead of 10 km ( i ) Lime,moorum, building rubbish |
| 13 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface and filling cracks (if any), applying EPCO ACR wherever necessary, Providing and Moistening the surface with water to render it saturated. Mix Cement and Monobond WF in the ratio of 1.25 kg to 1 by weight and stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 14 | Providing water proofing treatment over the new R.C.C. roofs terrace toilet by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 find sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg/sq.m. |
| 15 | Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases and making good the walls etc. 20 mm dia nominal outer dia pipes. |
| 16 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. 32mm outer dia. |
| 17 | Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall. 110mm outer dia. |
| 18 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:110 mm dia |
| 19 | Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:75 mm dia |
| 20 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 110 mm dia |
| 21 | Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating. 75 mm dia |
| 22 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 110 mm dia |
| 23 | Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door : 75 mm dia |
| 24 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110 mm dia |
| 25 | Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 75 mm dia |
| 26 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, with door: 110 mm dia |
| 27 | Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, with door: 75 mm dia |
| 28 | Providing and fixing nahani trap of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door : 110 mm dia |
| 29 | Providing and applying on a well prepared vertical surface Masterseal 550EL of BASF make or equivalent elastomeric flexible, two component polymers modified cementitious composite system that requires no addition of water at the site. The product shall be applied in minimum two coats to achieve total DFT of 1mm. The material shall be mixed and applied fully in accordance with the manufacturer's instructions. The product shall exhibit at least 40% elongation at ambient & 30% elongation in under water condition with tensile strength greater then 20 Kg/cm2. The product shall resist 1.5 bars pressure when tested as per DIN 1048 at 2mm DFT. When applied at 2mm DFT, elastomeric coating shall be able to bridge crack up to 0.5mm width. All scaffolding, ladders, supporting materials etc. complete. Rates shall be inclusive of all labour, materials, tools and plant etc. complete. |
| 30 | Providing and laying Autoclave Aerated cement blocks masonry (Light Weight Foam Concrete Blocks) with 100 mm thick AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work. |
| 31 | 15mm cement plaster 1: 3 (1 cement: 3 coarse sand) on the rough side single or half brick wall. |
| 32 | Cuddappah stone slab machine cut flooring over 20mm (average) thickness of cement mortar 1:4 (1 cement : 4 coarse sand laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete - 25 mm thick. |
| 33 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade, area of slab over 0.50 sqm/. a. Jet Black |
| 34 | Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 35 | Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996. 500 lit. capacity, to be placed on floor seven (6th Floor Roof) |
| 36 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm. nominal size) excluding cost of centering, shuttering and finishing in: All works upto plinth level |
| 37 | Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc. Small lintels not exceeding 1.5 m clear span, including coping and the like requiring form work to the suspended portions. |
| 38 | Providing and fixing Quartz Single Bowl Kitchen Sink (24 x 18 x 9 Inches) Crafted from 14mm thick quartz and resin, this rectangular single-bowl sink offers durability, hygiene, and a pristine Crystal White finish with Air Square Flat Cut 304-Grade Floor Drain with Lock, Hole & Cockroach Trap (5 x 5 Inches) |
| 39 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 40 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type (BWP), core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 41 | Providing and fixing 1.00mm high pressure decorative Laminates (glossy/ matt) on wooden surfaces like doors, windows. The laminate should comprise of layers of specially selected paper, impregnated with melamine and phenolic resins pressed and hardened under heat and high pressure and should ensure strong bonding, resistance to boiling water and chemical and increase dimensional stablilty. Including cost of adhesive, nails during fixing etc. complete |
| 42 | Providing and fixing first class Indian teak wood moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surfaces etc. 50 x 12 mm |
| 43 | SOLID PVC WINDOW FRAME AND SHUTTER: Frame: of size 50mm x42mm consisting of frame made out of M.S. tube of 19 gauge of size 15mm x 15mm and Solid PVC sections made from 4.25mm thick sheet (4mm (±0.3) PVC foam sheet laminated with 0.25mm Rigid PVC sheet) of density 900 kg/cbm density manufactured by an ISO-9000 certified company, suitably joined using PVC solvent cement so as to prefixed in wall. In wall using hold fasts M.S. window grill should be fixed suitably with Solid PVC sections mitre cut on corners complete as per direction of Engineer-in-charge and manufacturer's specification. Shutter: consisting of frame made out of M.S. tube of 19 gauge of size 15mm x 15mm for style, top, bottom rail. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 4.25mm thick sheet (4mm (±0.3) PVC foam sheet laminated with 0.25mm rigid PVC sheet) of density 900 kg/cbm density manufactured by an ISO-9000 certified company, white colour rigid heat moulded PVC 'C' Channel of size 62mm x 25mm x 50mm of the window shutter forming stiles & rails. Glass panel and Wire mesh will be fitted externally in the clear space available between stiles and rails and fixed using window shutter PVC beading of size 12mm x 8mm complete as per direction of Engineer-in-charge and manufacturer's specification. |
| 44 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers. |
| 45 | Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main \\"T\\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main \\"T\\" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. |
| 46 | Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 47 | Wall painting (two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade. |
| 48 | Providing and fixing vitrified antiskid tiles (320x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete. |
| 49 | Colour glazed tiles 6 mm thick in skirtings risers of steps, dado laid on a bed of 12 mm thick cement plaster 1:3 (1 cement : 3 coarse sand ) jointed with white cement slurry. |
| 50 | Supply & Installation of Following Sanitaryware of Jaquar Make Orissa Pan with L Bend & extension |
| 51 | Supply & Installation of Following Sanitaryware of Jaquar Make Rimless Wallhung WC - SLS-6953BIUFSM N |
| 52 | Supply & Installation of Following Sanitaryware of Jaquar Make Single Piece Slim Concealed Cistern with Full Stand - JCS-2400FS |
| 53 | Supply & Installation of Following Sanitaryware of Jaquar Make Control Flush Plate - JCP-152415 |
| 54 | Supply & Installation of Following Sanitaryware of Jaquar Make Health Faucet - ALD-573. |
| 55 | Supply & Installation of Following Sanitaryware of Jaquar Make 2 Way Bib Cock - OPP-15041PM |
| 56 | Supply & Installation of Following Sanitaryware of Jaquar Make Half Thread Waste Coupling - ALD-709L130 |
| 57 | Supply & Installation of Following Sanitaryware of Jaquar Make Bottle Trap with Internal Partition - ALD-769L300X300 |
| 58 | Supply & Installation of Following Sanitaryware of Jaquar Make Table Top Basin - CNS-905 |
| 59 | Supply & Installation of Following Sanitaryware of Jaquar Make Pillar Cock - OPP-15001PM |
| 60 | Supply & Installation of Following Sanitaryware of Jaquar Make Angular Stop Cock - OPP-15053PM |
| 61 | Supply & Installation of Following Sanitaryware of Jaquar Make Urinal -URS-13261 |
| 62 | Supply & Installation of Following Sanitaryware of Jaquar Make Auto Closing urinal Valve - PRS-077 |
| 63 | Supply & Installation of Following Sanitaryware of Jaquar Make Flash Touch Free Infrared Hand Dryer - HDR-SSF-AK2807 |
| 64 | Supply & Installation of Following Sanitaryware of Jaquar Make Toilet Roll Holder |
| 65 | Supply & Installation of Following Sanitaryware of Jaquar MakeLiquid Soap Dispenser |
| 66 | Supply & Installation of Following Sanitaryware of Jaquar Make Sink Cock |
| 67 | Supply and Installation of VEGA SS Series Washroom Cubicles with 12mm thick boards and laminate as per selected shade and accessories of SS 304 Grade such as Coat Hook, Privacy thumb occupancy indicator, hinges with cover, door knob, adjustable foot, door stopper channel, top rail, U channel, F Channel, SS Screws and PVC Wall Plug in single colour as selected by client |
| 68 | Supply & Installation of Urinal Modesty Panel with SS 316 hardware on 12mm Board and laminate, size of urinal Partition 450mm(W) x 900mm(H) |
| 69 | Supply and Installation of Wash Basin Counter with Board and SS Accessories such as Hinges with cover, door knob, rubber door stopper lining, door stopper channel, U channel, etc. |
| 70 | Supply and Installation of Sanitary Napkin Incinerator (NB-02) with Accessories (Smoke Exhaust Flexible Tube), Capacity-2 Napkins at a time, Napkins Burning-20per day, Heating-Electric, Weight-08 Kgs, Input Voltage-1 Ph, 230V, 50Hz, Power-1000W, Mounting -wall, Dimension: 200*200*400 |
| 71 | Supply and Installation of Internal Wall Cladding system with 12mm thick board of high density woth single colour as per selection by client installed on aluminium channel |
| 72 | Providing and fixing the Scaffolding system on th exterior side, upto seven story heigh with GI pipe/MS tube with 1.5m centre to centre, horizontal & vertical pipe/tube jointing for plumbing and waterproofing purpose. |
| 73 | 12mm thick WPC Board Wall Panelling with Flutted sheet on Aluminium Framing as per drawing and pattern as per direction of architrect |
| 74 | Design, Supply and Installation of 20 Seater Conference Table made of HDHMR particle board fixed with approved laminate & fluted sheets as per the direction of engineer - in - charge. |
| 75 | Design, Supply and Installation of Coffee Table Counter with HDHMR and laminate admeasuring 48\\"x24\\" |
| 76 | Design, Supply and Installation of TV unit Counter for Amplifier, PA System Controller with HMHMR sheet and laminate admeasuring 48\\"x16\\" |
| 77 | L shaped tables (Size: 2.10m+1.8 m):- Providing and fabricating L- shaped work table of size: 2100mm x 750mm x 750mm and 1050mm x 750mm x 750mm as per drawing, top made of 25mm thick BWP ply and other members made of 19mm thick BWP ply or of the approved thickness as per drawing, all exposed surfaces to be covered with 6.00 mm thick Veneer of approved make/ teak wood beading and french polish (min. 3 coats) to be applied on all internal surfaces complete with 12mm plain glass with edge polish provided on desk top, keyboard holder and all hardware like hinges, handles, telescopic channels, lock, magnets, cable managers etc. complete as per design and approval of the engg. |
| 78 | FILE RACK: Supplying and placing in position file rack of size 43\\"x 16\\"x 7\\" using 18mm thk Marine ply with 1mm MATT laminate, Sliding Shutters, shelves, Handles, Lock provided. |
| 79 | Supplying and placing in position armed revolving high back chairs of approved make and colour, BIFMA (The Business & Institutional furniture manufactures association) compliant with features like front pivot synchro tilt mechanism having seat & back tilt option,5 position locking with anti shock back mechanism & seat depth adjustment, PU Armrests, neck rest, branded leatherite for Seat and Back, Die Cast Aluminium Base with buffing finish & nylon twin Castors as per approved image and make etc. Rate shall include of all iron mongeries hardware,fittings,fixtures etc. All material shall be of approved make. All works complete as per the drawing/ Image, technical specification and direction of the Engineer. |
| 80 | Providing & Fixing Training chair medium back with flip scratch resistance membrane and MS legs with powder coating . Chair should have cushioned seat & back support. Should have provision of using writing pad on RH side. The chair should be stable and stakable. |
| 81 | Supplying and placing in position armed revolving medium back chair of approved make and colour with HR foam fabric upholstery seat and mesh fabric type back , BIFMA complaint syncro tilt mechanism with locking facility, PU arms, nylon base with PU castors, class 3 DIN Gas lift, height adjustable arm rest complete with all necessary hardware . |
| 82 | Supplying and placing in position armed medium back chair of approved make and colour with HR foam fabric upholstery seat and mesh fabric type back , BIFMA complaint , PU arms, metal powder coated base, complete with all necessary hardware . |
| 83 | Providing & fixing False Ceiling Yashashri make or equivalent, made out of 2” x 1” M.S sq tube frame support structure & 20mm x 155mm x 1.2mm multi-cavity upvc section, 30mm x 40mm x 2mm Upvc multi-cavity section with hidden screwing system. The average weight of False Ceiling is 8.50 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods. |
| 84 | Providing and fixing 15mm thick densified tengular edged eco friendly light weight Calcium Silicate false ceiling tiles (like Aerolite Brand or Equivalent) of approved texture Spintone/ Cosmos/ Fine Fissured or equivalent of size 595mm x 595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanizing @ 120 grams per square metre. including both side) consisting of main \\"T\\" runner suitably spaced at joints to get required length and of size 24x38mm made from 0.33mm thick (minium) sheet, spaced 1200mm center to center, and cross \\"T\\" of size 24x28mm made of 0.33mm thick (Minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grid of size on a Perimeter wall angle precoated steel of size 600x600mm, resting on periphery walls/ partitions (24x24x300mm) made of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm and laying 15mm thick densified edges calcium silicate ceiling tiles of approved texture light fittings, fixture, smoke detectors etc., wherever required. Main \\"T\\" runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to celing using with 12.5mm dia and 50mm long dash fastners, level clips of size 85x30x0.8mm, spaced at 1200mm center to center along main \\"T\\" bottom exposed with 24mm of T-section shall be pre-painted with polyester baked paint, for all heights, as per specifications, drawings etc. complete. |
| 85 | Supply and application of Roofex 2000 a single component Modified Polymer based waterproofing elastomeric membrane high build coating for external wall waterproofing. Apply Priming coat after application of Zentrifix GSE first between the joint & then apply two coats of Roofex 2000 Modified Polymer based one component waterproofing elastomeric membrane excellent bonding to the substrate thoroughly with a brush. The scope of work includes treatment of joint on surface which will be built up with High performance, self-curing repair Mortar Zentrifix GSE to achieve an even and uninterrupted waterproofing application. Applying Roofex 2000 2 Coats embedded with Unbiodegradeble mesh between each coat all along the Cracks to form a highly flexible coating. |
| 86 | Providing and fixing vertical blackout blinds of approved colour and make; made with 100% polyester woven opaque fabric type. Having thickness of 0.55 mm & 100 mm in width. Acrylic coating is to be done for the fabric to resistance for cracking and fraying. |
| 87 | Supplying and installing in position at all level Compactor/Optimizer Storage System of approved manufacturer made of Rigid Knock Down construction made of 0.8mm thick CRCA (Cold rolled close annealed) steel conforming to IS: 513 Gr.D & powder coated with epoxy polyester powder coating of approved color & shade with a Dry Film Thickness of minimum 40 microns.Each body block (SS/SL/TM) building consists of 1 Main unit & then Add-on units . Each unit has 5 loading levels formed by 4 nos. adjustable shelves. Body unit shall be bolted to undercarriage which rolls onto the channels, which, shall be firmly embedded to the ground.The under structure shall be welded frame made of HR (hot rolled) steel fixed on rails. The sliding track on the floor shall be supported by ramps on either side .Body units shall be bolted to undercarriage.Sliding movement of each unit shall be controlled on rotating circular handle ( Mechanical drive). |
| 88 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. -- Group C - with Cat A Modular Acessories |
| 89 | Wiring for group controlled light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 90 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 91 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 92 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required. (c) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm Conduit) |
| 93 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/ 6 A modular switch connection painting etc. as required.(a) Cat A |
| 94 | Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required.(a) Cat A |
| 95 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor single core cable in the independent PVC casing capping of appropriate size as required d) 2 x 6 sq.mm + 1 x 6 sq.mm earthwire (25mm casing ) |
| 96 | Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required (but without MCB/RCCB/Isolator) (g) 12 way double door Cat A |
| 97 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (a) SP, Cat A |
| 98 | Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required. (c) DP, Cat A |
| 99 | Supplying and fixing following rating double pole (single pole and neutral) 240 V RCCB having a sensitivity current upto 300mA in the existing MCB DB complete with connections testing and commissioning etc as required (b) 40 A, Cat A |
| 100 | Supply and erecting of 12 inch (300 mm sweep) exhaust fan with double ball bearings, 1400 rpm, complete with all accessories.(a) Cat A |
| 101 | Supplying and erecting LED square / circular Max. 11 W down lighter/PanelLight having pressure die-cast aluminium housing, polystyrene diffuser havingsystem lumens output of Min. 1200 Lumens, min. efficacy of 110 lumen/W,CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%,THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV,Life class of 50,000 Hrs at L70B50 including driver, having mountingarrangement with board for surface type or spring loaded mounting clipscomplete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 102 | Providing and fixing Jaguar 2 Light Frosted Glass with Chrome finishing Wall Lamp 7w Cat no ;DWL-CHR-MB160275212A |
| 103 | Providing and fixing Jagaur 1 Light clear globe glass - Rose Gold with chrome finish pendant fixture Cat no :-DPN-RDG-MD160030111A |
| 104 | Supplying, erecting, testing and commissioning Conference Systems Delegate Unit with adjustable gooseneck microphone having minimum length (excluding pedestal) of 18.5' (470 mm) 7.5 mV/Pa, current consumption <50mA max, mic auto switch off time 75 seconds, input - line, output - line, headphone, speaker -max input 300 mW, Controls - talk switch, speaker, volume control, headphone volume control, with accessories such as foam windshield, 2.5m interconnecting cables complete as per specification no. PA-CSDU |
| 105 | Supplying, erecting, testing and commissioning Conference Systems Chairman Unit with adjustable gooseneck microphone having minimum length (excluding pedestal) of 18.5' (470 mm) long , 7.5 mV/Pa, current consumption <50mA max, mic auto switch off time 75 seconds, input - line, output - line, headphone, speaker - max input 300 mW, Controls - Priority switch, talk switch, speaker, volume control, headphone volume control and facilities like After pressing the Priority Switch mute all active delegate unit, with accessories such as foam windshield, 2.5m interconnecting cables complete as per specification no. PACSCU |
| 106 | Supplyig erecting, testing and commissioning Conference Controller Unit controlles up to 50 disscusion units with 50W PA Amplifier with robust metal case, Line o/p - 17.5V DC/3A Max.; -34dBV (20mV), minimum 2 or more inputs, Headphone output, 60-14000 Hz frequency response, S/N ratio >60dB, Speaker output 4?, 8?/(Low Impedence) and 70V & 100V/(High Impedence) Digital recorder with LED indication bar, can playback the pre-recorded messages, suitable for 230V AC & 24V DC, on provided 19\\" rack. Unit shall have the facility of feeding two independent groups of Delegate Units complete as per specification no. PA-CCU |
| 107 | Supplying, erecting, testing & commissioning Mixer Amplifier 120W RMS Power with Built-in MP3 player with remote control for USB, SD/MMC card reader, with min 5 Mic & 2 Aux Input, bluetooth facility, frequency response 50-15,000Hz ±3dB, Signal to noise ratio between 60dB to 65dB min 5 LED array for output level monitoring. It Shall have Line Output to connect a Booster Amplifier and Preamplifier Output. The Amplifier shall have Speaker Outputs - 4?, 8?, (Low Impedence) and 70V & 100V/(High Impedence), and can operate on 220-240V Power Supply & DC : 12V (facility to instant transfer to DC power if AC power fails) complete as per specification no. PA-MA |
| 108 | Supplying, installing, testing & commissioning 2-Way flush mount Ceiling Speakers with input power 30W RMS power, with power taps on 30/15/7.5W, 100V & 70V line, frequency response 90-18000Hz, stylish metal mesh grill and plastic frame, operates on 100V line for excellent reproduction of both speech and music, wide frequency response and adjustable tweeter complete as per specification no. PA-FMCS |
| 109 | Supplying, installation and testing of suitable size modular GI box , modular plate and cover complete with RJ-45 connector(modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required. a) CAT-A |
| 110 | Supplying, erecting & terminating 20 m HDMI cord low voltage grade minimum 4k compliant to be laid in provided conduits with male/female 19pinHDMI connectors complete. |
| 111 | Supplying and drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required a) CAT-6 |
| 112 | Supplying, erecting, testing and commissioning of multistrand annealed bare copper conductor, transparent PVC insulated 2C x 1.5 sqmm speaker wire in provided trunking/conduit etc.complete as per specification no. PA-TSPWR |
| 113 | Supplying and fixing of following sizes of rigid PVC conduit alongwith accessories in surface(medium)/recess(heavy) including cutting the wall and making good the same in case of recessed conduit as required (a) 20 mm |
| 114 | Supplying, installing, testing and commissioning of 2500 VA Digital pure sine wave inverter based on Insulated Gate Bipolar Transistor (IGBT) technology single phase 230V,50 Hz complete as per specification no. AP-INV (Without batteries |
| 115 | Supplying and erecting 12 V/200Ah Tubular battery with battery terminal wire, duly charged complete with 36 months warranty complete |
| 116 | Supplying and erecting LED square / circular Max. 18 W down lighter / Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2000 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B0 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 117 | Supplying and erecting LED flexible strip light 5m length upto 75W conforming IP 65 of any colour with driver complete. |
| 118 | Linear hanging profile light of 25w warm white 1200x50x80mm AC ON/OFF Make:-Jaguar |
| 119 | Linear hanging profile light of 50w warm white 2400x50x80mm AC ON/OFF Make:-Jaguar |
| 120 | Supply of 11TR High Static Ceiling Mounted Duct Type (Corded remote) 2 Outdoor Units (5.5TR) of LG Make |
| 121 | Installation of Ceiling Mounted Duct Type Indoor unit with supporting material |
| 122 | Supply & installation of DGT joints for piping |
| 123 | Supply & installation of heavy guage refrigerant copper piping with 19mm thick tubular insulation. |
| 124 | Supply & laying of 2.5 sqmm 6 core electrical cable with conduits inter connecting IDUs and ODU . |
| 125 | Supply,fabrication,and installation of 24-guage galvanized iron (GI) ductwork including all necessary fittings and supports |
| 126 | Supply & installation of 13mm thick nitrile rubber thermal insulation for ductwork. |
| 127 | Supply,fabrication and installation of canvas connection for machine outlets to reduce noise and vibration. |
| 128 | Supply and installation of powder-coated aluminium linear grilles for supply and return air systems. |
| 129 | Supply and installation of 13mm Armasound acoustic insulation on duct discharge point to mitigate noise transmission |
| 130 | Supply & installation of aluminium powder coated dampers for supply air |
| 131 | supply & installation of collar damper |
| 132 | Supply & fixing of 32mm hard PVC drain pipe with 10mm thick nitrile insulation. |
| 133 | Lifting & positioning of outdoor & indoor units |
| 134 | Supply & Fabrication of M S stand for mounting outdoor units. |
| 135 | Supply & charging of R 410A Gas. |
| 136 | Installation & commissioning of outdoor units |
| 137 | Providing and fixing precast reinforced concrete door frames of ASTRA make or equivalent in M25 grade concrete and reinforced with minimum three bars of 6 mm dia and confirming to IS:6523. The frames shall be manufactured in approved factory with all the necessary arrangements for fixing hinges, tower bolts by way of inserted PVC blocks and holes for receiving sliding bolts as specified. Sectional size of frame with single rebate : 60X 100 mm |
| 138 | Supply and Installation of Inlight Cineview Home Theatre Motorised Projector Screen 100\\" Diagonal 4:3 Ratio Format 7 Feet-Width x 5 Feet-Height Supports Ultra HD-3D-4K Technology(White) |
| 139 | Supply and Installation of Fully Automatic Native 1080P Android Smart Projector, Auto Focus, Auto 4D Keystone, 4X Brighter, 4K HDR Support, Rotatable Design, WiFi, USB & BT, Screen Mirroring, ARC Please Enable Macros to View BoQ information |
