|
| 1 | Providing, supplying and placing of Single Bed.Overall Size:Width - 2050.0 mm Depth - 973.0 mm Height - 720.0 mmMaterial:Headboard panels are made of 18 mm thick Prelaminated Particle Board.All the exposed edges are edge banded with 2 mm thick PVC edge banding. Bed leg frame structure consist of metal frames made of M.S. 50 x 25 mm box section in 1.2 thickness Internal Pipes made of 19 x 19 mm box section in 0.9 mm thickness. Headboard pipes are made of 25 x 25 mm box section in 0.9 mm thickness. Mattress holding bkt is made of 0.6 mm CRCA SHEET . Hardware :The high quality hardware used .Construction:Knock Down construction. Packets:1 packet. Finish: 18 mm thick Prelaminated Particle Board is in 4501, make — GODREJ (SHIRVAL).Bed leg frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/G CHARBROWN.REF NO. 9000605 to thickness of 50 microns (+-10).The product should be certified by Greenpro. |
| 2 | Four shelves offer more compartments and better organisation of clothes and accessories.• Comes in dual colour tones with a variety of combinations to choose from.• Apt for compact spaces and small families 900W * 1950H *500D |
| 3 | Width - 900.0 mm Depth - 450.0 mm Height - 750.0 mm Material : Top panel is made of 18 mm thick Prelaminated Particle Board All the exposed edges are edge banded with 2 mm thick PVC edge banding. Structure consist of metal frames made of M.S. 25 mm Square Pipes in 0.9 mm Thickness. Drawer assembly consists of drawer front made of 0.6mm CRCA sheet, drawer tray of 0.8mm CRCA sheet. Hardware : The high quality hardware used .Construction: Knock Down construction. Packets: 3 packets. Finish: 18 mm thick Prelaminated Particle Board is in 4501, make – GODREJ (SHIRVAL). Side frame structure and Back frame structure are powder coated in shade : MATT TAUPE WHITE. REF NO. 9001904 to thickness of 50 microns (+-10). Rest all metals are powder coated in shade : S/GCHARBROWN. REF NO. 9000605 to thickness of 50 microns (+-10). |
| 4 | Providing, supplying and placing of Visitor Chair. CHAIR UPPERSTRUCTURE: It is a single shell 1.2 ±0.1cm. thick hot pressed plywood with moulded polyurethane foam on top & backing foam on rear side. It is upholstered with option of knitted & leatherette fabric.The seat has extra thick foam on front edge to give comfort topopliteal area.The foam backing done in back ( Executive chairs only) for extra fluffiness and comfort in chair.SEAT & BACK HIGH RESILIENCE (HR) POLYURETHANE FOAM :The HR polyurethane foam for seat and back is moulded with density 45 +/-2 kg/m³ and Hardness load 16 ± 2 kgf as perIS:7888 at 25% compression. M.S. VISITOR TUBULAR FRAME (For Thrill Visitore chair): The powder coated (DFT 40-60micron) tubular frame is cantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube.ARMRESTS:The armrest top is moulded from polyurethane(PU) with metal insert and mountedon to a tubular frame.WIDTH (W): 60.5 CM.DEPTH (D): 65.0 CM.HEIGHT (H): 86.5 CM.SEAT HEIGHT (SH): 46.0 CM.The product should be certified by BIFMA Level 2,IAQ Gold , GreenPro. |
| 5 | Providing, supplying and placing of Bed side table.Overall Size :Depth — 461.0 mm Width — 460.0 mm Height — 510.0 mmMaterial:Body panels of Bed side table are made of 18 mm thick Prelaminated Particle Board 1S:12823 Class E1 (as per EN13986) .All the exposed edges are edge banded with 0.8 mm thick PVC edge banding glued with Hot Melt EVA glue.Drawer front are made of 18 mm thick Prelaminated Particle board 1S:12823 Class E1 (as per EN13986). Hardware:The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich.Construction:Knock Down construction.Packets :1 packet.Finish :.18 mm thick PrelaminatedParticle Board 1S:12823 Class E1 (as per EN13986) is in Imperial Oak shade.Lipping shade is 299P MAKE REHAUThe product should be certified by Greenpro. |
| 6 | 4 Ft Wide OHSU Unit – Technical SpecificationDimensions (4' W Unit):Door: 1198 mm (W) × 420 mm (H)Body: 1198 mm (W) × 315 mm (D) × 410 mm (H)Construction & Materials:Door fabricated from 0.6 mm thick mild steel (MS) sheet, conforming to IS 513 standards, mounted on overhead pocket sliding mechanism.Body constructed from 0.8 mm thick mild steel (MS) sheets, as per IS 513, with painted finish.Back Panel Arrangement:The unit is designed to be installed flush against a wall.No separate back panel is provided; the wall itself functions as the back support surface.Locking System:Cam lock mechanism provided. |
| 7 | Ortho Plus 78 36 5 ---------------FeaturesComes with a combination of convoluted foam with bonded foam to best suit your individual body type.Premium double jacquard fabric for top surface, with a contrasting side fabric.The convoluted design promotes blood flow and circulation, reducing pressure points and discomfort.Available in thickness of 10 cm and 12.5 cm.Cross SectionPre-Quilted Fabric: Premium knitted double jacquard fabric with high GSM offers aesthetic appeal.Convoluted Foam: Convoluted foam promotes airflow and breathability in the mattress with its egg-crate design, reducing the chance of heat retention during sleep.PU Foam: High-density PU foam ensures both comfort and durability in the mattress.Bonded Foam: Bonded foam maintains mattress stability, evenly distributing weight to prevent sagging.PU Foam Quilt: Adds soft cushioning and aesthetic appeal to the mattress. |
| 8 | Hostel Room Single Bed sheet welspun cotton |
| 9 | Providing, supplying and placing of Pillow.Size ( in cm) : 43 x 69• Open cell structure that reacts to body heat and weight by moulding to the sleeper’s body• Organic Cotton Fabric for extra comfort• Anti-fungal & Anti-allergic• Excellent neck support• Outstanding elasticity• Durable |
| 10 | TABLE TOP:- TABLE TOP IS MADE OF 25 mm THK PLB. FOR DINING APPLICATION & TO PROTECTIT FROM WATER, TOP IS WRAPPED WITH BRUSHED FINISH SS 304 SHEET 1 mm THK.UNDERSTRUCTURE:- SIDE FRAMES ARE MADE OF MS SQ TUBE 40 X 1.6 THK & SQ 25.4 X 1.2 THK.CROSS MEMBERS AT BOTTOM ARE CONNECTED WITH SIDE FRAMES . 4 mm THK MS PLATES AREFIXED AT THE TOP OF THE FRAMES FOR FIXING TABLE TOP. NYLON COVER CAP ARE PROVIDEDAT THE LEGS WHICH WILL PROTECT LEGS FROM WATER & RUBBING AGAINST FLOOR.COMPLETE TABLE IS KNOCK DOWN & FIXED WITH MACHINE SCREW FOR STRENGTH & DURABILITY.FINISH:- UNDERSTRUCTURE IS POWDER COATED (DFT 50±10 MICRON) |
| 11 | Providing, supplying and placing of Café Chair. The Seat and Back should be made up of injection moulded indoor grade PolyPropylene compound SEAT SIZE : 52.5 cm. (W) x 53.2 cm. (D) BACK SIZE : 51.6 cm. (W) x 40.5 cm. (H) The powder coated ( DFT 50±10 microns ) welded tubular frame should be made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm and 3.5 ± 0.03 cm x 1.5 ± 0.03 cm x 0.16 ± 0.0128 cm MSERW tube. The shoes should be made of indoor grade PolyPropylene compound and snap fitted with tubular frame. Overall Dimensions of ChairSeat Height - 45.0 cm.Height - 84.5cm.Width-52.5 cm and Depth-55.8 cm.The product should be certified by BIFMA Level 2, IAQ Gold, GreenPro |
| 12 | Providing, supplying and placing of Queen Bed.Overall Size :Length - 2060.0 mm Width - 1733.0 mm Height - 945.0 mmMaterial:Bed Structure consist of metal frames made of M.S. Channels in 1.0 mm Thickness.Horizontal plinths and bottom pliilth are made of 25 mm Thick Prelaminated Particle Board. Plinth support assembly is made of M.S. 25 mm square pipe in 1.2 mm thickness. Head board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it. Tail board is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed to it.Side rail is made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trims fixed on to it. Mattress panels of Bed are made of 18 mm thick Prelaminated Particle Board with all the exposed edges are edge banded with 0.8 mm thick PVC edge banding.Construction:Knock Down construction. Packets:1 Bed in 2 packets. Finish:18 mm thick Prelaminated Particle Board is in Walnut shade. Metal frames are powder coated in shade Mat Black to the thickness of 50 microns(+-10).The product should be certified by Greenpro. |
| 13 | Providing, supplying and placing of Bed Side Table.Overall Size : Depth - 450.0 mm Width - 440.0 mm Height - 510.0 mmMaterial : Body and drawer panels of Bed side table are made of 18 mm thick Prelaminated Particle Board. All the exposed edges are edgebanded with 0.8 mm thick PVC edge banding. Side panels are made of 18 mm thick Prelaminated Particle board with imported H.D.F. foil wrapped decorative trim fixed on to it. Hardware : The high quality hardware used like Roller slides, Hinges , minifix, dowels is of make Hettich..Construction : Knock Down construction.Packets : 1 packet. Finish :. 18 mm thick Prelaminated Particle Board is in Walnut shade.The product should be certified by Greenpro. |
| 14 | Overall Size (W x H x D):Main Unit: 1000 x 1980 x 550Height is excluding levelerNet weight: 98 kg1. Body:a) Aesthetically appealing plain, made from CRCA 0.8 mm.b) Hanging rod made of 1.0 mm thick MS ERW oblong tube having chrome plating & nickel plating.c) M10 screw type leveler with hex plastic base.2. Construction:Welded outer shell including hinges and overriding shutters.3. Finish:All MS sheet metal and metal frame components are powder coated with epoxy polyester powder to the thickness of 50 microns (±10 microns). Shutters having option of MS sheet and precoated sheet.4. Hardware:Main shutter lock: 3 way 9 wafers barrel lock with wave type key, integrated with the handle.Drawers: 4 digit numeric lock with compass type, integrated drawer pull and lock knob.Hinges for skirting: Spring loaded self-closing type with easy snap on fixing.Bumpers for doors & drawer, screw and washer for fixing shelf.Shelf supports for fixing shelves. |
| 15 | Main WorktopMade of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access flap provided on work surface for wire managementReturn WorktopMade of 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lippingModesty PanelMade of 18mm Thick Pre-laminated twin board (PLT) of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lippingLegsCube legs are fabricated from MS ERW Tube of 50 mm x 25 mm x 1.2mm thick and 40 mm x 40 mm x 1.2 mm thick (as per IS: 7138). At the top surface of leg, support brackets of 3 mm thick HR (as per IS: 2062) are welded for fixing worktop. These are welded together by argon shield welding. This welded structure is coated with 50 micron epoxy polyester coating. At the base, a plastic cap with M8 molded insert is fixed, on to which a straight M8 leveler fitted which allows for adjustment of the height upto 50mmCross MembersCross Members in Unitized T-2 Desk Series are made from 50mm X 25mm X 1.2mm thick ERW tube (as per IS:7138). These are coated with 50 micron epoxy polyester coating. Cross Members are assembled by friction fit PDC joinery and grub screws. There are always two cross members for one tableAccess FlapSoft closing access flap is used in Unitized T-2 Desk Series. Provision for standard size of 8 module electrical (Anchor Roma) is offered. Access flap is made from Aluminum extrusion, PDC parts made from Aluminum Alloy and plastic parts are made from Nylon 6 and wire brush with nylon bristlesPower BoxPower box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8 Module cutout provision for Anchor Roma). This is fixed with worktop along the depth at Access Flap positionIntegrated Hinge Door Storage with DrawerMade of 18mm Thick Pre-laminated twin board & 25mm Thick Pre-laminated board (PLB) of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Door is fixed with slide on hinges and handle is provided for ease of opening. Drawer is provided with metabox slide and lock for security including Integrated part ERU of T-25 Table |
| 16 | Providing & placing in position office table with with CPU Hanger with overall size shall be 1500 Width mm x 750 Depth mm x 728 Height mm . Top shall be 18 mm thick Pre laminated particle board all work surface edges shall be having duly sealed with 2 mm thick PVC edgebanding. Understructure Modesty Panel 18 mm thick Pre laminated particle board . The Rectangular frame shall be fabricated component in 1.2 mm thick CRCA , Finish : powder Coat( epoxy polyster) . Leg shall be fabricated component in 38 mm x 25 mm 1.2 mm thick MS ERW ATube ,finish powder coat ( epoxy polyster).The plastic cap for cable travel shall be injection moulded polypropylene and leveler glide for shall be nylon 6 & MS bolt. The storage shall be having shell and drawer tray 0.6 mm thick CRCA Finish powder coat (epoxy polyster) plus the drawer front shall be 0.8 mm thick CRCA Finish powder coat (epoxy polyster) plus lock with 10 lever and handle and leveller. The wire management shall be horizontal wire carrier 0.7 mm thick CRCA Finish powder coat (epoxy polyster) and vertical wire carrier 0.8 mm thick CRCA Finish powder coat (epoxy polyster) . The product should be certified by GreenGuard, IAQ Gold & GRIHA. |
| 17 | Providing, supplying and placing of Mesh Chair. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric.The Back is injection moulded in glass filled Polypropylene which is upholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having an adjustmentof 3.0 ±0.1 cm.* Mesh Back Size : 45.5 cm. (W) x 54.0 cm. (H)* Seat Size : 48.5 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and back cushion is moulded in Density Min 48 kg/m³, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression.TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offersimpact cushioning while sitting and synchronises with the back movement during posture changes. The \\"S\\" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion.The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit feature which is inbuilt in seat base and the tension (return force) is user weight dependent. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide. The height adjustment feature is button operated having adjustment of 6.6±0.5cm. The Armrest Top is made up of integral skin PU moulded over plastic inner moulded in glass-filledPoly-amide. PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift havingan adjustment stroke of 9.2 ± 0.3 cmPEDESTAL ASSEMBLY: The pedestal is injection moulded in glass-filled Poly-amide and fitted with 5 nos.twin wheel castors. The pedestal is 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors.TWIN WHEEL CASTORS: 5 nos. twin wheel castors are injection moulded in Poly-amide having 5.0±0.1cmwheel diameter and assembled to the pedestal.The product should be certified by BIFMA Level 2,IAQ Gold,GreenPro,GRIHA. |
| 18 | Body: Aesthetically appealing plain, made from combination of CRCA 0.6 mm &0.8 mm Thickness.3. Construction: Assembled.4. Finish: Epoxy Powder coated.5. Hardware: High quality standard hardware like screws, rivets, bushes, bangers,washers, etc.6. Door & Locking: Combination door opening. Common Cam lock fitted to the top most compartment door. Body: Aesthetically appealing plain, made from combination of CRCA 0.6 mm &0.8 mm Thickness.3. Construction: Assembled.4. Finish: Epoxy Powder coated.5. Hardware: High quality standard hardware like screws, rivets, bushes, bangers,washers, etc.6. Door & Locking: Combination door opening. Common Cam lock fitted to the top most compartment door. Please Enable Macros to View BoQ information |
