|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in charge. |
| 2 | In cement mortar |
| 3 | Demolishing cement concrete manually/ by mechanical means including refiling and disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 4 | 1:3:6 or richer mix |
| 5 | Trimming of the tree branches (above ground level and up to the height of two stroy building) by mechanical /manual means which are causing damage to the adjacent structure and the branches which are about to fall including stacking of the cut branches in the premises with a lead and lift up to 100 m etc. complete as per the direction of the Engineer in charge. |
| 6 | Branches of diameter up to 100 mm |
| 7 | Branches of diameter up to 200 mm |
| 8 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in substructure all upto plinth level : |
| 9 | Cement mortar 1:4 (1 cement : 4coarse sand) |
| 10 | Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in : |
| 11 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 12 | 12mm cement plaster of mix: |
| 13 | 1:4 (1 cement: 4 fine sand) |
| 14 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement: 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge |
| 15 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation, trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.- |
| 16 | All kinds of soil |
| 17 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including getting out and disposal of excavatedearth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. |
| 18 | All kinds of soil |
| 19 | Supplying and laying boulder soling (soling stone 125 to 45 mm)and voids filled with murum below floor and plinth including watering compacting and consolidating in layer not more than 150mm thick etc. complete |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level. |
| 21 | 1:2:4(1 cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) |
| 22 | 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) |
| 23 | Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriagefor all leads; but excluding the cost of entering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for thefollowing grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mixor bear the cost of extra cement. |
| 24 | All works upto plinth level concrete of M-25 grade |
| 25 | All works above plinth level concrete of M-25 grade |
| 26 | Add for extra cement in the items of design mix over and above the specified cement therin |
| 27 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 28 | Foundations, footings, bases of columns etc. for mass concrete. |
| 29 | Lintels, beams, plinth beams, girders, bressummers and cantilevers. |
| 30 | Columns, Pillars, Piers, Abutments, Posts and Strut |
| 31 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 32 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 33 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25mm thick |
| 34 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than0.08% and conforming to IS:15622, of approved brand & manufacturer,in all colours and shade, laid with cement based high polymer modifiedquick set tile adhesive (water based) conforming to IS : 15477, in average6 mm thickness, including grouting of joints.( Matt/Antiskid) |
| 35 | Vitrified tiles of size 800x800mm |
| 36 | Providing and laying Vitrified tiles in different sizes (thickness to bespecified by anufacturer), with water absorption less than 0.08 % andconforming to I.S. 15622, of approved make, in all colours & shade, inskirting, riser of steps, Dado over on cement based high polymermodified quick-set tile adhesive (Water based) conforming to IS: 15477 in average 6mm thickness including grouting the joint with white cement & matching pigments etc. complete. |
| 37 | Vitrified tiles of size 800x800mm |
| 38 | Providing and fixing 15-18 mm thick gang saw cut mirror polished and prepolished machine cut of any colour shade and size for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing and polishing, edge full moulding on both side or wherever necessarry as per drawing and instruction of Engineer Incharge etc. complete at all levels. |
| 39 | Granite of any colour and shade |
| 40 | Providing and fixing aluminium work for windows and ventilators with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 41 | For fixed portion: including Powder coated aluminium (minimum thickness of powder coating 50 micron) shade as approved by the Engineer in charge. |
| 42 | For shutters: of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required (Fittings shall be paid for separately) including Powder coated aluminium (minimum thickness of powder coating 50 micron)shade as approved by the Engineer in charge. |
| 43 | Providing & preparing Laboratory platform 600-800 mm wide out of 16-18 mm thk. Black granite supported over 12 mm thk. Cement Board including double moulding on the edges, with 25 x 50 mm size Aluminium hollow pipes (TW inserted) for framing etc. complete. 18 mm thk. plywood Panel shutters with 1m sunmica sheet on both the faces shall be screwed to Aluminium framework, via hinges. Intermediates shelves & pull-out working tray operating on telescopic channels shall be out of 18 mm thk. laminated plywood sheet. Necessary hardware like S.S. Handles, magnets, locks, etc. shall be considered. All edges shall be finished with 10mm thk.t.w. beadings. All beadings shall have 03 coats of acrylic emulsion paint after relevant coat of wood primer, with finishing etc. complete. (All Hardware-Ebco or equivalent make) |
| 44 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the rchitectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 45 | With float glass panes of 5 mm thickness |
| 46 | Providing and fixing stainless steel grade 304 mosquito net/wire gauze of average width of aperture 1.2-1.4mm with wire of 26 gauge mm with powder coated suitable aluminimum section (8X18 mm), 1.2mm th. for doors, windows in aluminium window etc. complete of make as approved by the Engineer in charge. |
| 47 | Providing and fixing aluminium/SS sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : |
| 48 | 300x16 mm |
| 49 | Providing and fixing aluminium handles/SS ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 50 | 125 mm |
| 51 | Providing and fixing aluminium/SS hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. |
| 52 | Twin rubber stopper |
| 53 | Providing and fixing aluminium/SS tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 54 | 250x10mm |
| 55 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight 36 kg to 80kg and door width 701mm to 1000mm) (make- Godrej or as approved) with double speed adjustment with necessary accessories and screws etc. complete. |
| 56 | Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction ofEngineer-in-charge complete. Upto 5mm depth and 5 mm width |
| 57 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 58 | Finishing with Deluxe Multi surface paint system for interiors using Primer as per manufacturers specifications including scafolding : |
| 59 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm |
| 60 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 61 | Two or more coats on new work |
| 62 | Steel work welded in built up sections/ framed work, including cutting, hoisting, bending fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 63 | In gratings, frames, guard bar, ladder, railings, brackets, gates, plates, sheetsand similar works |
| 64 | Steel work in built up tubular (round, square or rectangular hollow tubes, purlin etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 65 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps,i/c making good the walls etc. concealed pipe, including paintingwith anti corrosive bitumastic paint, cutting chases and making good the wall etc. |
| 66 | 15 mm nominal outer dia Pipes |
| 67 | Providing and fixing G.I. pipes complete with all G.I. fittings and clamp including including painting with anti corrosive bitumastic paint cutting and good the wall etc |
| 68 | 25 mm nominal outer dia Pipes |
| 69 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 70 | 25 mm nominal bore |
| 71 | Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : |
| 72 | 25 to 40 mm nominal bore |
| 73 | Providing and fixing on wall face/floor with clips unplasticised - PVC (SWR type 'A',working pressure 4 Kgf per sq cm ) pipes conforming to IS: 13592 including all fittings like Tee, Bend,cleaning type,Y etc.conforming to IS: 14735,scafolding & jointing with seal ring/ solvent cement and testing of joints complete, conforming to IS: 5382 leaving gap for thermal expansion of make Supreme/Kissan classic/Prince as approved by the Engineer in charge. |
| 74 | Single socketed pipes 110 mm diameter |
| 75 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : |
| 76 | Size 600x450x200 mm |
| 77 | Providing & Fixing 15mm C.P. brass angle cock with C.P copper connecting pipe 375mm long & nuts, washer & C.P. brass flange complete, including cutting & making good the wall wherever required. As per list of approved make or Equivalent |
| 78 | Bench/wall Mounted 3 Way swan neck Column With Swiveling Spout, Water Flow Around 40i/min At 3 Bars Pressure, Surface Protection:epoxy Powder Coating Ral 7035 Materials:brass / Handle In Pp Head work Sealing. |
| 79 | Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in approved by Engineer-in-charge) 0.05 mm. 240 mpa mm steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal or with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 80 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 81 | Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. |
| 82 | Relaying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost).. |
| 83 | Providing and fixing vertical blinds with 100mm Louver width, quality of approved make fabric made of 100% polyester woven fabric thickness 0.40mm with Acrylic coating resistance to Cracking & Fraying and treated for dust repellency, UV proof , virtually maintenance free having plastic bottom chain thickness of chain-0.50mm and diameter-3mm, Plastic with metal bottom weight - 116.20mmX48.30mm and suitable coating on exterior, including all fixtures and fittings complete in all respect as per design/color/shade including requisite installation brackets etc as required for installation at site with anchoring arrangements complete as directed by engineer incharge. |
| 84 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). |
| 85 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm +/- 5% total coated thickness (TCT), Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete : |
| 86 | Gutter .(600 mm over all girth) Please Enable Macros to View BoQ information |
