|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and as directed. |
| 3 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed. |
| 4 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid of size 45X90 MM made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 5 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid of size 65X125 MM made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid of size50X100 MM made out of 5mm thick wood grain printed PVC sheet reinforced with MS Square tube fixing in opening as per specifications and drgs complete all as specified & directed. |
| 7 | Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specification & drawings complete all as specified and as directed. |
| 8 | S &F for factory made solid panel PVC door shutter 30mm thick ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 9 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 11 | S &F for factory made solid panel PVC door shutter 30mm thick but wire gauge panel i.e panel should be wire gauge in lieu of PVC sheet panel .wire gauge shall be wraped on a additional squre tube 8 mm M.S. solid tube shall be welded to M.S tube and wire guage shall be strechtd tightly firmed ( style) consisting to frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Penelling of plain colour PVC sheet to be fitted in the MS. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. complete all as specified and as directed. |
| 12 | S&F Stainless steel wire cloth 0.36 mm nominal dia and wire and average width of aperture 1.40 mm fixed with stainless steel staples complete all as specied and directed. |
| 13 | S&F 30 mm thick Flush shutters ,Loclally available soild core construction ,with paticle board core and plywood face panels , commercial type both face is covered with decorative face veneer with lipping /frame to match and complete all as specified and directed. |
| 14 | M & L for 35 mm 2nd class Hard Wood, plain framed Loclally available panelled shutters ( two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board medium density, wood particle board with commercial veneering on both face IS 1003 ( Part-I) kiln seasoned and chemically pressured treated complete all as specified and directed. |
| 15 | S&F 30mm thick 2nd class hard wood Glazed and skeleton shutters ( Loclally available panelled shutter FOR WINDOW), open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (B) fitted to chowkhats complete all as specified and as directed by the Engr-in-Charge. |
| 16 | S&F, 2nd class hard wood (Sal), plain, solid, straight, chowkat and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed. |
| 17 | M&L preparing new surfaces of wood & wood based material over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all asspecified and directed. |
| 18 | S&F Butt hinges medium weight cold rolled mild steel of 100 mm and fixed with screw complete all as specified & directed. |
| 19 | S&F Stainless steel butt hinges 100 mm and fixed with screw complete all as specified and directed |
| 20 | S&F Aluminium alloy, anodised, sliding door bolt, 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 21 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 200 mm and fixed with machine made screws complete all as specified & directed. |
| 22 | S&F extruded aluminium alloy handles 125 mm size, fabricated type anodised, fixed with machine made screws complete all as specified & directed. |
| 23 | S&F in repair mild steel 150 mm, single action spring hinges, mild steel with steel wire spring, stove enamelled, black complete all as specified and directed. |
| 24 | S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc. |
| 25 | S&F 3mm thick, plain glass pin head type and glazing with oil putty,silicone or wooden beads, in square not exceeding 0.5 sqm in each pane including hacking out old broken glass of any thickness and any description from wooden/ steel frame/ stone,concrete or brick surrounds complete all as specified and directed. |
| 26 | S&F in repair galvanised wire cloth, 0.48 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised staples complete all as specified and directed |
| 27 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Area not exceeding 2.00 sqm each (Note: The unit rate quoted by contractor included cost of glass and includes all other connected accessories.) etc complete all as specified and direcetd. |
| 28 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors , windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 29 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium window and ventilator (adequate track) without sash, aluminium section weighing 0.55 kg/m including joining cleats, glazing clips, rubber neoprene packing, necessary powder coated hardware ie. handles, barrel tower bolts, hinges etc, powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board, wire mesh etc. shall be measured and paid for separately. |
| 30 | S&F 4.00 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 31 | S&F 4.00 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 32 | S&F IN REPAIR 4.00 mm thick tinted glass of selected quality in square not exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 33 | S&F IN REPAIR 4.00 mm thick tinted glass of selected quality in square exceeding 0.5 sqm in each pane, fixed to aluminum frame with and including suitable rubber beading complete all as specified and directed |
| 34 | S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 35 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-Charge. |
| 36 | M & L for Powder coated (minimum thickness of powder coating 50 micron) aluminium door shutters of aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, powder coated aluminium handles 150mm size 2 Nos, 3 Nos powder coated aluminium hinges heavy duty and 02 Nos 150mm long powder coated aluminium tower bolts in each door shutter with powder coated aluminum snap beading, screws etc. complete all as specified and directed Note : Panel filling ie. glass, fibre sheet, board etc. shall be measure and paid for separately. |
| 37 | S & F for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and complete all as specified and directed |
| 38 | S&F for 4 mm thick ACP board both side lamination fixed with screws complete all as specified . |
| 39 | S&F 12mm thick tuffended designer glass fixed on steel pivot all as approved sample with engravings/ designs/ symbols to the pattern and style as approved and directed by Engineer-in-Charge. Make : PILKINGSTON/ULTRA CLEAR/MODI GUARD/SAINT GOBAIN/ATUL as approved. |
| 40 | S&F 'D' type stanless steel handle decorative type 300mm long bright finished all as per design/ pattern approved by Engineer-in-Charge |
| 41 | S&F for framed work such as grills gratings, etc, with ends of bars shouldered and or riveted , or forged into spikes, framed guard bars , barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290,E-165 , complete all as specified and directed. |
| 42 | M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on surfaces of any description over 10cm width or girth on new steel surfaces including preparation of surfaces complete all as specified and directed |
| 43 | S&F 25 mm bore SS Pipe curtain rods including SS brackets & SS decorative dome, suitable for door/widows curtain with fancy type SS decorative dooms with ss brackets fitted to each end and fixed to wall with wooden battens incl. removal of existing rod and making good complete all as specified and directed. |
| 44 | S&F in repair 18/19mm thick WPC board, prelaminated both face with decorative choice laminations one side and other side balancing white, fixed with screws to timber frame work including beading on cutting /exposed edges, polishing for cupboard shutter complete all as specified & directed. MAKE RAJSHREE ,BLACK COBRA, NAVRATAN AS APPROVED. |
| 45 | S&F 100 mm long Hasp and Staple, safety type aluminium with MS hinge pin incl bolt to hinge plate and fixed with stainless steel screws complete all as specified and directed. |
| 46 | S&F continuous (piano) hinges, width of flaps (when open) 30mm stainless steel, bright finish or electrogalvanised complete all as specified and directed. |
| 47 | S&F 100 mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 48 | S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 150 mm and fixed with machine made screws complete all as specified & directed. |
| 49 | S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed. |
| 50 | Demolation of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and directed. |
| 51 | M&L for brick work with sub class 'Fly ash brick, in cement mortar 1:4, straight or curved on plan to any radius in half brick thick wall complete all as specified & directed. |
| 52 | M&L Brickwork with fly ash Modular bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in built cement mortar 1:4 in complete all as specified and as directed |
| 53 | S&F in repairs 5mm thick hollow wall panelling plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of solvent cement and fixing at site including disconnecting and refixing of electric light board complete all as specified and as directed. |
| 54 | S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling (At the spacing of 1 feet centre to centre) inclusive of fixing on to wall to make PVC Frame as per secification and drawing comlplete all as specified and directed. |
| 55 | S&F Solid PVC Wall Lining consisting of 5mm thick Plain wood grain printed PVC sheet inclusive of solvent cement and fixing at site on to wall to make PVC Frame as per specification and drawing comlplete all as specified and directed.MAKE BLACK COBRA , RAJSHREE , NAVRATNA OR EQUIVALENT |
| 56 | M&L two coat of synthetic enamel paint over coat of Red oxide primer over Old steel surfaces nexc 10 cm width or girth complete. |
| 57 | Taking down cement or cement lime plaster any description on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc and rubbish off the premises complete all as specified & directed. |
| 58 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. |
| 59 | M&L for prepration of newly plastered wall surfaces & applying necessary levelling course to the surfaces of walls and applying two coat of interior of oil emulsion over a coat of wall primer incuding wall care putty complete all as specified & directed. |
| 60 | M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed. |
| 61 | Material and labour for Preparation of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying TWO coat of white wash complete all as specified and directed by Engineer -in-Charge. |
| 62 | Material and labour for Preparing of old decorated surface of walls of plastered or unplastered surfaces by brooming down or steel wire brushing, scarping down smoke soot, moulds, moss and efflorescent salts treating oil and greasy spots and applying TWO coat of oil distemper complete all as specified and directed by Engineer -in-Charge. |
| 63 | Material and labour for prepration old or untreated surfaces of wood or wood based surfaces and applyingone coat of synthetic enamel paint over a prime coat of pink primer on surfaces of any desription, not otherwise described, over 10 cm width or girth complete all as specified and directed by Engineer -in-Charge. |
| 64 | Material and labour for applying one coat of synthetic enamel paint on steel or iron surfaces of any decription, over 10 cm in width or grith, not othewise described including preparation of surfaces and over a coat of red oxide complete all as specified and directed by Engineer -in-Charge. |
| 65 | M&L for preparation surfaces for building Nos and applying one coat of synthetic enamel paint and writing letters or figures (Block, Roman, Italic or Indian) of n exc 10cm height, width of letter shall not be less than 15mm, including stops, commas, lines, brackets and making outer boarder with approved tint of synthetic enamel thick paint complete all as specified and as directed. |
| 66 | Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado, pcc tiles at roof etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 67 | M&L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graged stone aggregate as in floors, etc complete all as specified and directed.. |
| 68 | M&L 18-20 mm thick pre-polished Granite slab, machine cut, for floors/ shelves, cooking platforms, window cills, steps, jambs and pillar top laid over & including 20mm thick screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone complete all as specified & directed. |
| 69 | M&L for rounding, chamfer, splays or arris and smooth finishing at the edges of stone as in steps, cooking platform and other similar locations complete all as specified and directed. |
| 70 | S&F IN REPAIRS Aluminium alloy, anodised, sliding door bolt, 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed. |
| 71 | S&F IN REPAIRS aluminium anodised barrel tower bolts of extruded section, length of bolt 200 mm and fixed with machine made screws complete all as specified & directed. |
| 72 | S&F IN REPAIRS extruded aluminium alloy handles 125 mm size, fabricated type anodised, fixed with machine made screws complete all as specified & directed. |
| 73 | S&F IN REPAIRS for door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed |
| 74 | S&F IN REPAIRS door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc. |
| 75 | S&F for peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed. |
| 76 | S&F in stainless steel plate rack of Size 900mm x 600mm x 250mm made of 1mm thickj stainless steel sheet complete all as specified and directed. |
| 77 | S&F for in repairs Looking mirror 5 mm to 6 mm thick with fixing brackets ,screws, pvc rawal plugs etc. complete all as specified and directed |
| 78 | S&F in repairs 600x450 mm looking mirror of selected quality glass mounted on 4mm thick PVC building board or commercial plywood and fixed to wooden plug with chromiun plated screws complete all as specified and directed |
| 79 | Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 80 | M&L for non skid ceramic Coloured tiles, 300mmx300mmx 6 mm to 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match with the colour of tiles, over and including 15 mm thick screed bed or bedding layer of cement mortar( 1:6) complete all as specified and directed. |
| 81 | M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600 mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 10 mm thick backing coat in cement mortar (1:3) complete all as specified and directed. |
| 82 | M&L 2 ND CLASS HARDWOOD EXC 3 AND N EXC 6 SQ CM Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or bradsLnosed, splayed,chamfered or rounded on one edge or face,complete all as specified |