|
| 1 | DESCRIPTION OF ITEMS |
| 2 | Chair Easy FD-1108/229S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 3 | (b) Front leg |
| 4 | (c) Arms |
| 5 | (d) Rear/front/Side rail duly made holes for caning as per drg of seat as to match with the existing, made of Teak wood all as specified and directed |
| 6 | Recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed. |
| 7 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Easy as specified & directed by Engr-in-charge |
| 8 | Polishing : Material and Labour for High Glossy Melamine Polishing of Wooden furniture Surfaces of Chair Easy duly removed the old surfaces with Sand / Emery paper using Electric Grinder & removing the Stains rectifying Cracks and Dents with Filling Materials like Bees wax, Chalk Powder etc mixed with Melamine Polish (One or more coats as required) alongwith required border in Black colour in Furnitures of Mahogany Colour , Finish Shall be uniform Texture highly Glossy complete all as specified and directed. (Make : Asian / Shalimar/Berger) |
| 9 | Chair Writing/Chair CB Office with Arms FD-202/ 250/280S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 10 | (b) Front leg |
| 11 | (c) Rear/front/Side rail duly made holes for caning as per drg |
| 12 | (d) Arms. |
| 13 | (e) Back rest |
| 14 | (f) Stiffener |
| 15 | (g) S & F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed. |
| 16 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair writing as specified & directed by Engr-in-charge |
| 17 | All as per item no. 7.00 above but Polishing of Chair Writing . |
| 18 | Chair Dining PBOR (FD/MAP-II/04) S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed. (a) Front leg |
| 19 | b) Rear legs |
| 20 | c) Front/rear rail |
| 21 | d) Side rail |
| 22 | e) Stiffener |
| 23 | f) Taking out and removing old U/S worn out plastic sheet and S & F new PVC Plastic sheets fixing of Bottom of plastic sheets |
| 24 | S & F new 25x3 mm flat iron in (two nos in each chair) 38cm Long to the bottom base of PVC seat for the durability of PVC Seat all as specified and as directed. |
| 25 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Dining as specified & directed by Engr-in-charge |
| 26 | All as per item no. 7.00 above but Polishing of Chair Dining PBOR (FD/MAP-II/04) |
| 27 | Trolley for TV (FD/E6/MAP/04 (R)) a) Removing of old unserviceable 18 mm prelaminated particle board and S&F new prelaminated MDF board 18mm thick, pre-laminated particel board (three sides & top with edge of top moulded as shown in drg |
| 28 | b) Removing of old unserviceable 5.5 mm thick openable unserviceable glass shutter with unserviceable magnetic catcher and S&F new glass shutter with magnetic catcher on fron side as per drawings. |
| 29 | c) Removing of old unserviceable existing castores wheels and supply and fix new castores wheels as per drawing. |
| 30 | Dressing Mirror Gents (FD/E6/MAP/16 ) a) Removing of old broken Looking Mirror from Dressing Mirror Gents & S&F New Looking Mirror, 5mm thick for Dressing Mirror Gents as shown in drawing with 4mm thick 1st class hard wood teak beading all around the Mirror with suitable size of screws Complete all as shown in drgs & as directed. |
| 31 | b) Removing of old broken shelves of Dressing Mirror Gents of 5mm thick plain glass including aluminium brackets and S&F new shelves with aluminium brackets for holding the shelves all as shown in drgs and as directed. |
| 32 | All as per item no. 7.00 above but for Dressing Mirror Gents (FD/E6/MAP/16 ) |
| 33 | Table Dressing Ladies with Mirror & Cushioned Stool ( FD/MAP-II/07) a) Removing of old broken unserviceable existing Looking Mirror from Table dressing Ladies and S&F New Looking Mirror of 5 mm thick for Table Dressing Ladies all as shown in drgs and as directed. |
| 34 | b) Removing of old broken unserviceable existing heavy duty revolving nylon double wheels from stool cushioned and S&F new heavy duty revolving nylon double wheels in stool cushioned all as shown in drgs and as directed. |
| 35 | c) Removing of old broken unserviceable existing top and cushioned seat of the stool and supply and fix new top 12mm thick BWP plywood openable and Cushioned Seat as shown in drg. The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth as approved by Engr-In-charge/GE. |
| 36 | d) Removing of old u/s sides of the cushioned Stool and S&F new sides as all as shown in drgs and as directed by Engr in Charge. |
| 37 | All as per item no. 7.00 above but Polishing of Table Dressing Ladies with Mirror & Cushioned Stool ( FD/MAP-II/07) |
| 38 | Table Dining 06/8 Person (Officer)(FD/E6/MAP-II/03) a) Removing of old unserviceable existing top of table & S&F new top of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 39 | b) Removing of old UNSV front/rear rail of Table Dining and S&F new front/rear rail as per existing shape & size made out of Ist class hard wood Teak duly Melamine polished to match the existing surface glossy finish complete all as specified and as directed and shown on drg. |
| 40 | c) All as per item No 38.00 (b) above but side rail of Table Dining complete all as shown and directed. |
| 41 | d) All as per item No 38.00 (b) above but legs of Table Dining. |
| 42 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge |
| 43 | All as per item no. 7.00 above but Polishing of Table Dining 06/8 Person (Officer)(FD/E6/MAP-II/03) |
| 44 | Table Dining 1200x900x760mm(FD/E6/MAP-II/03) a) Removing of old unserviceable existing top of table & S&F new top of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 45 | b) Removing of old UNSV front/rear rail of Table Dining and S&F new front/rear rail as per existing shape & size made out of Ist class hard wood Teak duly Melamine polished to match the existing surface glossy finish complete all as specified and as directed and shown on drg. |
| 46 | c) All as per item No 44.00 (b) above but side rail of Table Dining. Complete all as shown and directed. |
| 47 | d) All as per item No 44.00 (b) above but legs of Table Dining. |
| 48 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 49 | All as per item no. 7.00 above but polishing of Table Dining 1200x900x760mm(FD/E6/MAP-II/03) |
| 50 | Table Peg (FD- 277 & 236/384)(FD/MAP-II/11)S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 51 | (b) Top rail (Rear/front) |
| 52 | (c) Stiffeners |
| 53 | (d) Replacement of existing unserviceable table top for Table peg made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 54 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs as specified & directed by Engr-in-charge |
| 55 | All as per item no. 7.00 above but polishing of Table Peg (FD- 277 & 236/384)(FD/MAP-II/11) |
| 56 | Sofa sets 4/5 seater (FD-281, FD-373, MAP )S&F New components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Front Legs |
| 57 | (b) Rear legs |
| 58 | (c) Batterns |
| 59 | (d) Back rail (3 seater) |
| 60 | (e) Front rail (3 seater) |
| 61 | (f) Back rail (single seater) |
| 62 | (g) Front rail (single seater) |
| 63 | (h) Hand rest |
| 64 | (j) Providing new cushion of 40 densityPU foam of size 560 x 530x100mm thick complete of (Make-Sleepwell, Kurlon, Godrej) all as specified and as directed. |
| 65 | (k) Providing new tapestry cloth cover for seat foam and back foam of sofa sets of approved shade & quality to cover the foam of size 560 x 530x100mm thick complete all specified and as directed. Note : 1. A suitable Zip with matching color to one side of cushion shall be provided. |
| 66 | All as per item no. 7.00 above but polishing of Sofa Set 04 Seater. |
| 67 | All as per item no. 7.00 above but polishing of Sofa Set 05 Seater. |
| 68 | Chair Dining Cushioned FD/E6/MAP/10 (R)& Long back TPS&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Rear leg duly curved as per existing leg |
| 69 | (b) Front leg |
| 70 | (c) Side/back/front rails |
| 71 | (d) Stiffener/duly Curved back rests as per exisitng drg |
| 72 | (e) Providing new Cushion of appropriate size of 40 density PU foam complete with dismantling old one as per sample held with GE Make- Sleepwell, Model-Primo Cool/Godrej. |
| 73 | (f) New tapestry cloth cover for cushion of approved shade & quality as per sample held with GE to cover the foam of appropriate size and dismantling old one. |
| 74 | M & L for fixing of PVC shoes nylon buffers superior quality of 25mmx25mm dia with 30mm long screws in the legs as specified & directed by Engr-in-charge |
| 75 | All as per item no. 7.00 above but polishing of Chair Dining Cushioned FD/E6/MAP/10 (R)& Long back TP |
| 76 | Bed Plywood Top (FD-245 & 246)S&F new components comprising of following outer member made of Teak Wood , covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one all as specified and as directed.(a) Head board |
| 77 | (b) Foot board |
| 78 | S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed.(a) Long rail of size 90 x 35 mm |
| 79 | (b) Stiffner of size 60 x 40 mm |
| 80 | (c) Wooden bracket |
| 81 | (d) Removing of old U/S and broken existing 12mm thick commercial plywood from Bed Hard PlyTop and supply and fix new 12mm thick BWP plywood as per existing shape and size of Make- Archidply (Classic Marine 710) /Century Ply (Bond 710)/Greenply (Gold 710) fixed to Bed Hard PlyTop with suitable size of steel nut & bolt with washer rest all as per drg and as directed. |
| 82 | All as per item no. 7.00 above but polishing of Bed Plywood Top (FD-245 & 246) |
| 83 | Table Dining for 08 persons FD-30(M)/ 273 & 239 S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 84 | (b) Top rail (long/front) |
| 85 | (c) Top rail (short/side) |
| 86 | (d) Replacement of existing unserviceable table top for Table dining 8 pers made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohogini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 87 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 88 | All as per item no. 7.00 above but polishing of Table Dining for 08 persons (FD-30(M)/ 273 & 239) |
| 89 | Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 90 | (b) Top rail (long/front) |
| 91 | (c) Top rail (short/side) |
| 92 | (d)Replacement of existing unserviceable table top for Table dining 6 pers made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 93 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 94 | All as per item no. 7.00 above but polishing of Table dining for 06 persons (FD-30(M)/ 273 & 239) |
| 95 | Teapoy (FD-382/ 232 & 278)S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 96 | (b) Top rail (long/front) |
| 97 | (c) Top rail (short/side) |
| 98 | (d)Replacement of existing unserviceable table top for Teapoy made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 99 | All as per item no. 7.00 above but polishing of Teapoy (FD-382/ 232 & 278) |
| 100 | Table Centre & Table Centre Two Tier (FD-274 & 235)S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 101 | (b) Top rail (long/front) |
| 102 | (c) Top rail (short/side) |
| 103 | (d)Replacement of existing unserviceable table top for Table Centre made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 104 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs as specified & directed by Engr-in-charge |
| 105 | All as per item no. 7.00 above but polishing of Table Centre & Table Centre Two Tier (FD-274 & 235) |
| 106 | Chair Dining (FD-1105/279/203/228)S&F new components of 1st class HW (Teak) including dismantling unservicable one complete all as shown in drgs and as directed by Engr-in-Charge. all as specified and as directed.(a) Rear leg |
| 107 | (b) Front leg |
| 108 | (c) Rear/front/side rail |
| 109 | (d) Stiffener |
| 110 | (e) Back rest |
| 111 | (f) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed. |
| 112 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs of Chair Dining as specified & directed by Engr-in-charge |
| 113 | All as per item no. 7.00 above but polishing of Chair Dining (FD-1105/279/203/228) |
| 114 | Table 900 x 600 mm with/ without drawer (FD- 223 & 224)S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 115 | (b) Top rail (long/front) |
| 116 | (c) Top rail (short/side) |
| 117 | (d) Replacement of existing unserviceable table top for Table 900x600 mm made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 118 | (e) Drawer made out of 12 mm thick BWP Plywood and front side of 18 mm thick prelaminated MDF board both side laminated having one side teak finish and other side balancing white. Including provision of brass Knob complete all as specified and directed. |
| 119 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 120 | All as per item no. 7.00 above but polishing of Table 900 x 600 mm with/ without drawer (FD- 223 & 224) |
| 121 | Table 900 x 900 x 760 mm (FD-273)S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 122 | (b) Top rail (long/front/back) |
| 123 | (c) Replacement of existing unserviceable table top for Table 900x900 mm made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 124 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 125 | All as per item no. 7.00 above but polishing of Table 900 x 900 x 760 mm (FD-273) |
| 126 | Side board (FD-372)(a) S & F door shutter made of 18/19mm thick Pre-laminated MDF board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed.Note :- (i) Knob shall be made of Brass. (ii) Hinges shall be 50 mm of approved quality. |
| 127 | (b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminated particle board with laminated finish and knob including dismantling unserviceable one all as specified and as directed. |
| 128 | (c) New top made out of 18/19mm thick Pre-laminated MDF board with laminated finish duly providing 4mm thick teak wood beading all round including dismantling unserviceable one all as specified and as directed. |
| 129 | (d) 3.5mm thick one side teak face plywood on sides including dismantling unserviceable one all as specified and as directed. |
| 130 | (e) Back made out of 8 mm thick BWP ply wood including dismantling unserviceable one all as specified and as directed. |
| 131 | (f) Preparation of old/new wooden exposed surfaces by way of scrapping, rubbing, cleaning & applying two coat of high class French polish till glossy finish Complete all as shown in drgs and as directed. |
| 132 | Table writing (FD-249 & 275)(a) Replacement of existing unserviceable table top for Table writing made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohigini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 133 | S&F new components of 1st class HW (Teak) including dismantling unservicable one all as specified and as directed.(b) Leg |
| 134 | (c) Front rail/Back/Side rail |
| 135 | (d) Side/bottom rail |
| 136 | (e) Back made out of 6 mm thick BWP plywood including dismantling unserviceable one all as specified and as directed. |
| 137 | (f) Side made out of 18/19 mm thick MDF board one side laminated finish including dismantling unserviceable one all as specified and as directed |
| 138 | (g) Stiffner |
| 139 | (h) Drawer made out of 18/19 mm thick MDF board one side laminated finish including provision of knob including dismantling unserviceable one all as specified and as directed.Note :- Knob shall be Brass of approved size and quality |
| 140 | (j) Complete cupboard from the table writing and made of 18 mm thick pre-laminated MDF board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed.Note :- (i) Knob shall be Brass of approved size & quality. (ii) Hinges shall be 50 mm of approved quality. |
| 141 | All as per item no. 7.00 above but poishing of Table writing (FD-249 & 275) |
| 142 | Table Dressing Gents with mirror (FD-230)(a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directNote : Make of Mirror should be of Modiguard/ST Gobain |
| 143 | (b) Drawer made of 12mm thick BWP plywood and front side made of 18mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed. |
| 144 | All as per item no. 7.00 above but polishing of Table Dressing Gents with mirror FD-230 |
| 145 | Table Dressing Ladies with mirror ( FD-251)(a) Looking mirror with frame of 5mm thick of appropriate size with frame along with 6mm thick commercial plywood back of the mirror and minor repairs including dismantling unserviceable one all as specified and as directed.Note : Make of Mirror should be of Modiguard/St Gobain |
| 146 | (b) Drawer made of 12mm thick BWP plywood and front side made of 18/19mm thick pre-laminated particle board one side laminated finish and provision of knob including dismantling unserviceable one all as specified and as directed. |
| 147 | All as per item no. 7.00 above but polishing of Table Dressing Ladies with mirror (FD-251) |
| 148 | Locker Bed Side (FD-54(M))(a) CP Handle 100mm of standard quality including dismantling unserviceable one all as specified and as directed. |
| 149 | (b) Hasp & Stapple of standard quality including dismantling unserviceable one all as specified and as directed. |
| 150 | (c) S&F 3.5/4mm thick Teak Face plywood to Top and both sides including dismantling unserviceable one all as specified and as directed. |
| 151 | (d) Partition made of 18/19mm thick shisham wood planks (not more than 3 pieces) including dismantling unserviceable one all as specified and as directed. |
| 152 | (e) Shelf made of 18mm thick shisham wood planks including dismantling unserviceable one all as specified and as directed. |
| 153 | (f) S& F 18/19mm thick prelaminated MDF board on front side of the doors (both) including dismantling unserviceable one all as specified and as directed. |
| 154 | All as per item no. 7.00 above but polishing of Locker Bed Side FD-54(M) |
| 155 | Stool Dressing CB (FD-252/374) S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one Complete all as shown in drgs and as directed by Engr-in-Charge. (a) legs |
| 156 | (b) Stiffeners rail. |
| 157 | (c) Side rail duly drilled holes for caning as per drg. |
| 158 | (d) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed. |
| 159 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs as specified & directed by Engr-in-charge |
| 160 | All as per item no. 7.00 above but polishing of Stool Dressing CB (FD-252/374) |
| 161 | Table Bed Side (FD-248/210/276/157) S&F new components of S&F new components of 1st class HW (Teak wood) or 18/19mm thick prelaminated MDF board as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Top |
| 162 | (b) Sides |
| 163 | (c) Shelves |
| 164 | All as per item no. 7.00 above but polishing of Table Bed Side (FD-248/210/276/157) |
| 165 | Hat Stand with Mirror (FD- 206 /233 ) S&F new components of 1st class HW (Teak Wood) or 04mm thick plywood commercial as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Looking Mirror of 5 mm thick. (Make Modiguard/Saint Gobain/Atul) |
| 166 | (b) Brass hooks for hanging the Hat Stand as per drawing. |
| 167 | All as per item no. 7.00 above but polishing of Hat Stand with Mirror (FD- 206 /233 ) |
| 168 | All as per item no. 7.00 above but polishing of Table Office Clerk Wooden (DB-3129) |
| 169 | All as per item no. 7.00 above but polishing of Table Office Officer Wooden (DB-3128) |
| 170 | All as per item no. 7.00 above but polishing of Book Case Wooden |
| 171 | All as per item no. 7.00 above but polishing of Tray Wooden 03 Space |
| 172 | Chair Wooden Bottom (FD-285 ) S&F new components of 1st class HW (Teak Wood) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Front Legs |
| 173 | (b) Rear Legs |
| 174 | (c) Stiffeners |
| 175 | (d) Seat (08 mm BWP Plywood) |
| 176 | M & L for fixing of PVC shoes superior quality of 25mmx25mm dia with 30mm long screws in the legs as specified & directed by Engr-in-charge |
| 177 | All as per item no. 7.00 above but polishing of Chair Wooden Bottom (FD-285 ) |
| 178 | Charpoy Wooden Plytop (FD -56/227) S&F new components of 1st class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Long Rails |
| 179 | (b) Short Rails |
| 180 | (c) 12mm thick Commercial Plywood BWR |
| 181 | (d) Legs |
| 182 | All as per item no. 7.00 above but polishing of Charpoy Wooden (FD -56/227) |
| 183 | TSR Wooden (FD-86M)) S&F new components of 1st class HW (Saal) as shown in drg and as directed by Engr-in-Charge including dismantling unservicable one. (a) Long Rails |
| 184 | (b) Short Rails |
| 185 | (d) Legs |
| 186 | All as per item no. 7.00 above but polishing of TSR Wooden (FD-86M)) |
| 187 | Bin Linen Multipurpose (FD/E6/MAP/09)(a) S & F door shutter made of 18 mm thick Pre-laminated MDF board exterior grade duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed.Note :- (i) Knob shall be brass of approved size & quality). (ii) Hinges shall be 50 mm of approved quality. |
| 188 | (b) Front portion of the drawer as to match with the existing shade made out of 18mm thick Pre-laminated MDF board with laminated finish and brass knob including dismantling unserviceable one all as specified and as directed. |
| 189 | (c) New top made out of 18/19mm thick Pre-laminated MDF board having 1.5 mm thick PVC beading all around as to match with the existing shade including dismantling unserviceable one all as specified and as directed. |
| 190 | (d) Removing of old unserviceable telescopy channel and S & F New telescopy channel of Make-Ebbco/Hettich/Rinox for smooth movement of the drawer. |
| 191 | (e) Back made out of 08 mm thick BWP plywood including dismantling unserviceable one all as specified and as directed. |
| 192 | All as per item no. 7.00 above but polishing of Bin Linen Multipurpose (FD/E6/MAP/09) |
| 193 | Table 1520x860x760 mm (Wooden) S&F new components of 1st class HW (Teak Wood) including dismantling unservicable one all as specified and as directed.(a) Leg |
| 194 | (b) Top rail (long/front) |
| 195 | (c) Top rail (short/side) |
| 196 | (d) Replacement of existing unserviceable table top for Table 1520x860x860 mm made out of 18 mm thick MDF board exterior grade duly post-formed with 0.6 mm thick laminate in Mohogini/Walnut colour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of Make-Rehau/Pegasus/Kynes shall be fixed on two sides with strong bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Engineer-in-charge. |
| 197 | S&F in repairs Triangular wooden bracket 100X100X20mm thick between leg & rail for extra strength complete, rest all as shown on drg and as directed by Engr-in-Charge. |
| 198 | All as per item no. 7.00 above but polishing of Table 1520x860x760 mm (Wooden) Please Enable Macros to View BoQ information |
