|
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness including nanital or similar pattern from roof covering or in ridges, hips, valley gutter and similar works complete, all as specified and directed by Engineer-in-Charge. |
| 2 | S&F, 0.63mm thick galvanised, corrugated mild steel sheeting with grade of zinc coating of 275gms/square metre with two corrugation side lap and at least 150mm end lap, fixed with 'L' type or 'J' type or cranked hook bolts, in roof, walls etc. complete, all as specified and directed by Engineer-in-Charge |
| 3 | S&F, 0.80mm thick plain, Galvanised, mild steel sheeting (ISI marked) grade 'O' with minimum 120grams/sqm for zinc coating in ridges, hips, valley gutters, drip, and straight flashings, fixed with coach screws and washers complete, all as specified and directed by Engineer-in-Charge |
| 4 | S&F, Pre-painted galvalume aluminium zinc coating G.I based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete, all as specified and directed by Engineer-in-Charge |
| 5 | S&F Pre-painted galvalume aluminium zinc coating G.I based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering, fixed with self taping screws, complete, all as specified and directed by Engineer-in-Charge |
| 6 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exc 1.5 Sqm each complete, all as specified and directed by Engineer-in-Charge |
| 7 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm each complete, all as specified and directed by Engineer-in-Charge |
| 8 | Taking down Shutters of any description exc 1 sq. m and n exc 2 sq. m each complete, all as specified and directed by Engineer-in-Charge |
| 9 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete, all as specified and directed by Engineer-in-Charge |
| 10 | S&F 35 mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete, all as specified and directed by Engineer-in-Charge |
| 11 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete, all as specified and directed by Engineer-in-Charge |
| 12 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete, all as specified and directed by Engineer-in-Charge |
| 13 | S&F 150 mm long Aluminium anodised,handle of extruded section cast type anodised and fixed complete, all as specified and directed by Engineer-in-Charge |
| 14 | S&F 200 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete, all as specified and directed by Engineer-in-Charge |
| 15 | S&F 250 mm long Aluminium alloy ,anodised sliding door bolts with hasp staple (bolt type) and fixing clips of sheet, cast or extruded section and fixed bolts and sliding bolts of extruded section or cast aluminium alloy complete, all as specified and directed by Engineer-in-Charge |
| 16 | S&F butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, complete, all as specified and directed by Engineer-in-Charge |
| 17 | Supply & Fix 100 mm long Butt hinges, medium weight, cold rolled mild steel and fixed, complete, all as specified and directed by Engineer-in-Charge |
| 18 | S&F aluminium powder coated sliding windows with three sliding pane , two of glass and one of wiremesh , shutter glazing with and including 4 mm thick tinted glass fixed with rubber gasket with aluminium beading, clips, frame, with duco pattern grill of size 75mm x75mm and steel mosquito wire netting fixed with beading made with aluminium section suitable for three track slides including making good of wall surfaces to match with existing surfaces complete, all as specified and directed by Engineer-in-Charge |
| 19 | S&F alluminium alloy anodised door frame fixed with side hung shutters and glazing fixed with and including 4.80 mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete, all as specified and directed by Engineer-in-Charge :-(a) Frame 65x38x1.60mm thick with rawl plug(b) Middle and lock rail : 150x44x1.6mm thick(c) Bottom rail : 150x44x1.6mm thick(d) Top rail/sype : 85x44x1.6mm thick(e) Aluminium beading : 0.7mm thick(f) Aluminium handle D type 150mm long, 100 mm long steel butt hinge ,aluminium tower bolt 9.9mm dia shoot 200mm long brass mortice lock 100mm 4 leaver ,aluminium stopper, hydraulically regulated door closer ( Make Sandhu ISI marked or ites equivalent approved make)(g) Making good of wall surface to match with existing surface complete. |
| 20 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average aperture 1.40mm and fixed with stainless steel wire staples complete, all as specified and directed by Engineer-in-Charge |
| 21 | Dismantling wrought iron or mild steel work of any description not otherwise specifically provided for, complete, all as specified and directed by Engineer-in-Charge |
| 22 | S&F mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc. with ends of barsshouldered and / or riveted or forged into spikes, and similar work confirming to Fe 290.Gde-E-165 complete, all as specified and directed by Engineer-in-Charge |
| 23 | Taking up or down steel tubing 15 mm bore and connection including cleaning for refixing complete, all as specified and directed by Engineer-in-Charge |
| 24 | Fixing only old serviceable 15 mm GI tubing and connection in new or old position (wall, ceiling or floor etc.) including necessary fittings & fixtures etc. complete, all as specified and directed by Engineer-in-Charge |
| 25 | S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete, all as specified and directed by Engineer-in-Charge |
| 26 | Taking up or down steel tubing 20 mm bore and connection including cleaning for refixing complete, all as specified and directed by Engineer-in-Charge |
| 27 | Fixing only old serviceable 20 mm GI tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittings & fixtures etc. complete, all as specified and directed by Engineer-in-Charge |
| 28 | S&F 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete, all as specified and directed by Engineer-in-Charge |
| 29 | S&F in repair 15 mm bore bore Bib taps cast copper alloy chromim plated fancy type ,screwed down, screwed for iron pipe or for brass ferrule and fixed complete, all as specified and directed by Engineer-in-Charge |
| 30 | S&F in repair stop valve 15 mm dia, cast copper alloy,CP fancy type with screwd down,high pressure,screwed both ends for iron pipes or for unions and fixed in pipe complete, all as specified and directed by Engineer-in-Charge |
| 31 | S&F pillar tap 15 mm dia cast copper alloy with capstan head chromium plated fancy type, screwed down high pressure, screwed for iron pipe and fixed complete, all as specified and directed by Engineer-in-Charge |
| 32 | S&F in repair 20 mm bore gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete, all as specified and directed by Engineer-in-Charge |
| 33 | Supply & Fix in repair, 600 mm long PVC Connection 15mm size with PTMT nuts complete, all as specified and directed by Engineer-in-Charge |
| 34 | S & F in repair, Soap dish chromium plated any size fixed to plugs with chromium plated brass screws and wooden/ plastic cleats complete, all as specified and directed by Engineer-in-Charge |
| 35 | S & F in repair tubular towel rail brass chromium plated 20mm dia , 60 cm long between flanges complete, all as specified and directed by Engineer-in-Charge |
| 36 | S & F in repair, Vitreous china wash hand basin 550 x 450mm, white flat back including cast iron bracket, cutting for and pinning the ends of brackets or erecting on stand including 32mm bore brass chromium plated waste coupling with long screwed shank and fly nuts, PVC flexible waste pipe of bore 32mm and adequate length complete, all as specified and directed by Engineer-in-Charge |
| 37 | S&F , in repair Vitreous china squating pan, Orissa Pattern, size 580 x 440 mm white with integral foot rests and PVC P or S trap (excluding flushing cistern and flushing pipe) including connection to trap & flushing pipe etc complete including making good to floor complete, all as specified and directed by Engineer-in-Charge |
| 38 | S&F in repair, Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern ) including connection to drain (or outgoing pipe) and to flushing pipe , antisyphonage pipe , pvc cover sheet in same colour etc complete, all as specified and directed by Engineer-in-Charge |
| 39 | S&F in repair, Vitreous china bowl urinal flat back size 430X370X340 with grating and union for discharge pipe (excluding flushing cistern ,flush pipe and waste pipe) complete, all as specified and directed by Engineer-in-Charge |
| 40 | S&F in repair 10 litre capacity PVC valveless, Syphonic action type, fluhing cistern low level,white with inlet ball valve, float and handle, flush pipe etc complete, all as specified and directed by Engineer-in-Charge |
| 41 | S&F in repair, Brass CP wash basin mixer 15mm bore dia for mixing Hot or Cold water screwed down for iron pipe and fixed complete, all as specified and directed by Engineer-in-Charge |
| 42 | S&F in repair, water jet for EWC chromium plated with PVC connection complete, all as specified and directed by Engineer-in-Charge |
| 43 | S&F in repair, hand shower (health faucet) 1 mtr PVC tube with wall hook complete for EWC, complete, all as specified and directed by Engineer-in-Charge |
| 44 | S&F in repair, bevelled edge mirror of slected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete, all as specified and directed by Engineer-in-Charge Please Enable Macros to View BoQ information |
