|
| 1 | Conversion of Charpoy GI Pipe 32 mm Newar to Charpoy GI 32 mm plywood top as shown in draing No. FD-220. |
| 2 | (i) Removing old, torn Nylon Newar from existing charpoy GI pipe. (ii) Supply of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’.(iii) Supply of 03 (Three) nos of extra stiffener of size 40mmx06mm MS flat iron of 85cm( +/- 2cm) length with three holes of size 10mm (One in the centre and one each on both side of centre hole at a distance of 12’’).(iv) Fixing of all three M S square pipe 25mm x 25mm iron stiffener into the exiting gaps between long rails which may vary in each case (one in the centre & other two at 6” distance from each short rails) by welding ensuring that the stiffeners fit tight against the inner walls of both long rail. Care must be taken to ensure that stiffeners & upper crest of GI pipe long rails are at same level. (v) Fixing of 7 layer12mm BWR plywood to the holes made on the M S flat iron stiffener with 9 counter-sunk flat head scres/locks nuts & bolts as directed by Engr-in-Charge.(vi) Corners of plywood shall be rounded off and suitably holed with rose bit to prevent heads of nuts/bolts from protruding out in case bolts other than flat head are used. All four corners & bottoms of plywood to be chiselled/suitably sheared off to the extent to ensure housing of raised portion of elbow and chuk nuts, to make the plywood seat flat on rails & stiffener evenly throughout. Remaining details all as directed by Engr-in-Charge. |
| 3 | M&L for dismantling of u/s GI long rail of 25 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium grade ISI marked duly both end threaded and fixed all as shown on drawing. |
| 4 | Dismantling of u/s GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 1.02 above and all as shown on drawing. |
| 5 | Dismantling of u/s GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI short rail obtained from item No 1.02 and 1.03. Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set rest as shown on drawing. |
| 6 | S & F in replacement of UNSV GI elbow 3 way of 32 mm dia from charpoy GI pipe 32 mm dia, medium grade with ISI marked shall be provided and rest as shown on drawing. |
| 7 | S & F in replacement of UNSV GI check nut 32 mm dia from charpoy GI pipe 32 mm dia 6 mm thick of best quality as approved by GE and rest as shown on drawing. |
| 8 | Supply and replacement of Gutkha made of 1st class hard wood for legs. |
| 9 | Repair of GI Charpoy Pipe 32 mm with hardtop /plywood top as shown in drawing No. FD-220. |
| 10 | Supply & fixing of 7 layer 12mm BWR ISI marked plywood of size 6’6”x3’ all as per drawing and directed by Engr in Charge. |
| 11 | Supply & fixing of three M S square pipe 25mm x 25mm iron stiffener into the exiting gaps between long rails which may vary in each case (one in the centre & other two at 6” distance from each short rails) by welding ensuring that the stiffeners fit tight against the inner walls of both long rail. Care must be taken to ensure that stiffeners & upper crest of GI pipe long rails are at same level |
| 12 | M&L for dismantling of u/s GI long rail of 32 mm dia from charpoy GI pipe 32 mm dia, supply and fixing of new GI long rail of 32 mm dia medium grade ISI marked both end threaded and fixed all as shown on drawing. |
| 13 | M&L for dismantling of u/s GI short rail of 32 mm dia from charpoy GI pipe 32 mm dia, providing by cutting, threading both end and forming of short rail from retrieved of 32 mm dia GI long rail obtained from item Sl No 2.03 above and all as shown on drawing. |
| 14 | M&L for dismantling of u/s GI leg 32 mm dia from Charpoy GI pipe 32 mm dia, providing by cutting, threading one end and forming of leg from retrieved 32 mm dia GI Long Rail/short rail obtained from item No 2.03 and 2.04 Welding of 3 mm thick 50 mm dia MS plate to the bottom, face of the leg & 25 x 3 mm flat iron made to shape and size of clamp with 16 guage washer at the bottom of clamp for fixing MNF set incl rest as shown on drg. |
| 15 | S & F in replacement of UNSV GI elbow 3 way of 32 mm dia from charpoy GI pipe 32 mm dia, medium grade with ISI marked shall be provided and rest as shown on drawing. |
| 16 | S & F in replacement of UNSV GI check nut 32 mm dia from charpoy GI pipe 32 mm dia 6 mm thick of best quality as approved by GE and rest as shown on drawing. |
| 17 | Supply and replacement of Hardwood blocks made out of 1st Class hard wood. |
| 18 | CHAIR REVOLVING HIGH BACK/LOW BACK/ EXECUTIVE /COMPUTER /NET SEAT & BACK CHAIR (Drawing No. TP) |
| 19 | S & F in replacement of maintenance free Gas lift for all type of chairs revolving rest all as directed by Engr-in-Charge. |
| 20 | S & F in replacement of Padestal assy. Injection moulded in black 30% glass filled nylon , 50mm MS castor pin is of press fitted to each prong for holding the castor,for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge. |
| 21 | S & F in replacement of twin wheel castors for all type of chairs revolving rest all as shown on drg and as directed by Engr-in-Charge (Set of 5 twin castor wheels will be measure as 1 set). |
| 22 | S & F in replacement of PU/Fabric seat & back duly upholstered with best quality Acrylic/polyester febric complete for all type of chairs revolving rest all as directed by Engr-in-Charge. (Set of 1 seat and 1 back will be measured as 1 set) |
| 23 | S & F in replacement of arm rest of chair revolving made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest rest all as directed by Engr-in-Charge. |
| 24 | Repair of Chair PVC with Arms Cushion on Seat and Back (Drawing No. TP) |
| 25 | S & F in replacement of PU/Fabric seat & back duly upholstered with best quality Acrylic/polyester fabric complete for all type of chairs PVC with arms rest all as directed by Engr-in-Charge. (Set of 1 seat and 1 back will be measured as 1 set) |
| 26 | Chair dining cushioned seat/ Chair dining Long Back Special/ Chair Dinin Carving Legs/ Chair dining Model No 205/4 (Drawing No. TP) |
| 27 | Replacement of UNSV Cushion with cover with new 2\\" thick 40 dencity make Sleepwell/ Kurlon/ Smart as approved for back of Chair dining duly covered with tapestry cloth of approved quality and shade by Engr in Charge. |
| 28 | Replacement of UNSV Cushion with cover with new 3\\" thick 40 dencity make Sleepwell/ Kurlon/ Smart as approved for Seat of chair dining duly covered with tapestry cloth of approved quality and shade by Engr in Charge. |
| 29 | Stiffner made out of Teak wood duly finished & match with existing item as per directed by EIC. |
| 30 | Nylon buffer |
| 31 | Chair Visitor with arms model-Seina/ Chair Visitor mesh back & seat CP Palted strecture Make-Stellar/ Chair Visitor cushion S type without handle model No 304 Make-Flex (TP) |
| 32 | S & F in replacement of PU/Fabric seat & back duly upholstered with best quality Acrylic/polyester fabric/ Net Fabric complete for all type of chairs Visitor rest all as directed by Engr-in-Charge. (Set of 1 seat and 1 back will be measured as 1 set) |
| 33 | S & F in replacement of arm rest of chair visitor made of black integeral skin polyurethane reinforced with MS insert scratch proof complete for all type of chairs revolving with arm rest rest all as directed by Engr-in-Charge. |
| 34 | Nylon buffer |
| 35 | Double bed with 2 beds side tables (TP) |
| 36 | S & F in replacement of UNSV head board of double bed made out of plywood 18 mm thick duly fixed with sunmika/ Formika as per sample approved and directed by by Engr in charge |
| 37 | S & F in replacement of UNSV head foot board of double bed made out of plywood 18 mm thick duly fixed with sunmika/ Formika as per sample approved and directed by by Engr in charge |
| 38 | S & F in replacement of UNSV Side Board of double bed made out of plywood 18 mm thick duly fixed with sunmika/ Formika as per sample approved and directed by by Engr in charge |
| 39 | S & F in replacement of UNSV plywood top of double bed made out of plywood 18 mm thick duly as per sample approved and directed by by Engr in charge |
| 40 | S & F in replacement of UNSV Side Side of Bed side Table made out of plywood 18 mm thick duly fixed with sunmika/ Formika as per sample approved and directed by by Engr in charge |
| 41 | S & F in replacement of UNSV Top of Bed side Table made out of plywood 18 mm thick duly fixed with sunmika/ Formika as per sample approved and directed by by Engr in charge |
| 42 | S & F in replacement of UNSV Drawers of Bed side Table made out of plywood 18 mm thick duly fixed with sunmika/ Formika mounted on telespoic channels as per sample approved and directed by by Engr in charge |
| 43 | Sofa Set 5 (3+1+1) Seater Fully cushioned (TP) |
| 44 | S & F in replacement of UNSV PU foam with new Pu Foam of 100mm thick 40 density (Make:Kurlon/Sleepwell) and new leatherite upholstery superior quality (rate not less then Rs 800/- per mtr) and as per sample approved by GE and duly stitched by machine and hand for sofa set five seater (3+1+1) special type fully upholstry duly cushioned on seat,back,side arms and back complete all as specified and directed by Engr-in-charge.(Drg-TP) |
| 45 | Sofa Set 4 Seater Fully cushioned (TP) |
| 46 | S & F in replacement of UNSV PU foam with new PU Foam of 100mm thick 40 density (Make:Kurlon/Sleepwell) and new leatherite upholstery superior quality (rate not less then Rs 800/- per mtr) and as per sample approved by GE and duly stitched by machine and hand for sofa set four seater (2+1+1) special type fully upholstry duly cushioned on seat,back,side arms and back complete all as specified and directed by Engr-in-charge.(Drg-TP) |
| 47 | Sofa Set 2 Seater Fully cushioned (TP) |
| 48 | S & F in replacement of UNSV PU foam with new PU Foam of 100mm thick 40 density (Make:Kurlon/Sleepwell) and new leatherite upholstery superior quality (rate not less then Rs 800/- per mtr) and as per sample approved by GE and duly stitched by machine and hand for sofa set two seater special type fully upholstry duly cushioned on seat,back,side arms and back complete all as specified and directed by Engr-in-charge.(Drg-TP) |
| 49 | Sofa Set Single Seater Fully cushioned (TP) |
| 50 | S & F in replacement of UNSV PU foam with new PU Foam of 100mm thick 40 density (Make:Kurlon/Sleepwell) and new leatherite upholstery superior quality (rate not less then Rs 800/- per mtr) and as per sample approved by GE and duly stitched by machine and hand for sofa set single seater special type fully upholstry duly cushioned on seat,back,side arms and back complete all as specified and directed by Engr-in-charge.(Drg-TP) |
| 51 | Table T8 size of 1199W x 590D x 750mmH,Make Godrej (TP) |
| 52 | Top shall be made out of 18mm thick prelaminated Superior quality MDF board with 4mm thick teak wood beading all around duly french polished. |
| 53 | Drawer lock best quality |
| 54 | Nylon buffer |
| 55 | Brunee three seater cushioned tenden with arms (TP) |
| 56 | Seat foam cushion 32 density duly covered with tapestry approved by GE/Engr-in-charge. |
| 57 | Back foam cushion 32 density duly covered with tapestry approved by GE/Engr-in-charge. |
| 58 | S & F in replacement of UNSV Steel legs of of Brunee three seater complete all as specified and directed by Engr in Charge |
| 59 | S & F in replacement of UNSV Arm Rest of of Brunee three seater complete all as specified and directed by Engr in Charge |
| 60 | Removal of existing worn out paint from outside including preparation of surface complete of the following Brunee three seater and M&L for applying two coats of 1st quality synthetic enamel paint over a coat of red oxide primer, rest all as directed by Engr-in-Charge |
| 61 | Bench steel 3 seater silver color with arms (TP) |
| 62 | S & F in replacement of UNSV Steel legs of of Bench steel 3 seater complete all as specified and directed by Engr in Charge |
| 63 | S & F in replacement of UNSV Arm Rest of of Bench steel 3 seater complete all as specified and directed by Engr in Charge |
| 64 | Peg table glass top (TP) |
| 65 | S & F in replacement of UNSV Glass Top toughen 8 mm thick of of Peg Table complete all as specified and directed by Engr in Charge |
| 66 | Table Corner / Table Centre with Glass top (TP) |
| 67 | S & F in replacement of UNSV Glass Top toughen 8 mm thick of Table corner/ Table Centre all as specified and directed by Engr in Charge |
| 68 | Meterial & labour after cleaning/scrapping off the following items of furniture & polishing the same with one coat of french polish duly preparing the smooth surface to the entire satisfaction of Engr-in- Charge/GE. |
| 69 | Table dining 8 pers with carving legs |
| 70 | Double bed special with carving legs |
| 71 | Bed side table with carving legs |
| 72 | Table 900 x 600 with marbal top and carving legs |
| 73 | Table dressing ladies with carving legs |
| 74 | Table centre special with carving legs |
| 75 | Peg Table glass top |
| 76 | Centre Table Glass Top |
| 77 | Note : 1. Rerformance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |
