|
| 1 | PEG TABLE GLASS TOP DRG NO. TP Supplying, and placing in position of side table as per Image.The side table made of solid wood (steam beech) in pu matt polish.The plain glass placed the top of the table in 8mm thk. The glass table top is made with strong glass and is inlaid onto the solid wood frame. The designer wooden legs are turned for a sleeker look. The framed edges slope inwards to the table top with defined edges. Material & Subtype:Solid Wood - Beech Wood ( spc:steam beach), Colour & Colour Family:Brown - Dark Oak, Legs:Solid Wood, Finish:Glossy, Style:Contemporary. The product should be from the manufacture of approved make Godrej/ Akoustikos/Durian/ HNI/Steelcase under the guidance of project consultant and engineer in charge. |
| 2 | TABLE CENTRE BRASS FRAME & GLASS TOP DRG NO. FD-375All as shown on drg. Overall size shall be 900mm x 450mm x 400mm. All wood shall be of first-class hard wood teak well-seasoned free from cracks, dead knots and others blemishes. Top shall be 7/8mm thick glass top with high quality. Irrespective whatever shown on drg. Two nos top side rails of size 20mm x 50mm shall be provided and 02 Nos. Side stiffeners and one no in centre making H shape of size 50mm x 20mm shall be provided at 100mm from bottom of legs. Four Nos PVC shoes shall be provided at the bottom of the legs fixed with screws. All exposed wooden surfaces shall be polished upto required shining. Rest all as specified and shown of drg or directed by Engr-in-Charge. |
| 3 | SOFA SET 5 SEATER TEAK WOOD DRG No. TP |
| 4 | THREE SEATER SOFASupplying and placing in position of 3 seater sofa size : 1905mm l x890mm dx 870mm h . The material : premium leatherette , the sofa colour is in black-eerie black-coffee brown, brown-burnt umber / finish : matte. Construction includes moisture content shall be less than 10-12%. Thickness of plywood used mm shall be 12 mm grade is 303 Indian standard for commercial common and moisture proof plywood tentative. Under structure frame is 18 mm thick kiln-dried German beech wood framing. Structure covered with p. U. Foam fixed with adhesive glue ,frame padded with high resilience polyurethane foam having 28 +/- 5 density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 +/- 5 density foam, cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 20 +/- 5. Stack foam structure covered with premium leatherette in black-eerie black-coffee brown, brown-burnt umber colour, legs are made by round shape in PVC material. Seat : 510 mm d x 445mm h , arms height @ 620mm / back height @ 460mm. |
| 5 | ONE SEATER SOFA:Supplying and placing in position of 1 seater sofa size : 960mm l x890mm dx 870mm h . The material : premium leatherette , the sofa colour is in black-eerie black-coffee brown, brown-burnt umber / finish : matte. Construction includes moisture content shall be less than 10-12%. Thickness of plywood used mm shall be 12 mm grade is 303 Indian standard for commercial common and moisture proof plywood tentative. Under structure frame is 18 mm thick kiln-dried German beech wood framing. Structure covered with p. U. Foam fixed with adhesive glue ,frame padded with high resilience polyurethane foam having 28 +/- 5 density in seat it shall be stack foam of 50mm thik,40mm thick back foam having 20 +/- 5 density foam, cushion arm 40mm thick provided padded with high resilience polyurethane foam having density 20 +/- 5. Stack foam structure covered with premium leatherette in black-eerie black-coffee brown, brown-burnt umber colour, legs are made by round shape in PVC material. Seat : 510 mm d x 445mm h , arms height @ 620mm / back height @ 460mm. |
| 6 | TABLE BED SIDE DRG NO. FD-240/260/28 (M)/276Over all size as shown on Drg. Sides and shelves shall be made of 12 mm thick pre-laminated particle board interior grade ISI marked having one side teak veneered and other side white. Top shall be made of 18 mm thick pre-laminated particle board interior grade ISI marked having one side teak veneered and other side white. Back shall be made of 6 mm thick ply wood commercial ISI marked Rest all as shown on Drg and as directed by Engr-in-Charge/GE. |
| 7 | SIDE BOARD DRG NO. FD-241Over all size as shown in drg. All wood work shall be used of first class seasoned hard wood. 19mm Pre-laminated particle board exterior grade BWR IS 12823 shall be used for frame work through out. 433 thick teak wood beading shall be fixed top, side, bottom, shutter and front of drawer of the side board. 6mm plywood commercial exterior grade BWR IS-303 shall be used for sides, bottom, and back for the drawer including long MS powder coated handle shall be used for shutter and drawer. All exposed wooden surfaces shall be French polished with high gloss finish. Rest all as per drawing and as directed by Engr-in-Charge. |
| 8 | TEAPOY WOODEN DRG NO. FD-232Over all size as shown on Drg. All wood shall be of first-class hard wood teak well-seasoned free from cracks, dead knots and others blemishes. Top shall be made of 18 mm thick pre-laminated particle board interior grade ISI marked having one side teak veneered and other side white. 4mm thick half round teak wood beading shall be provided al-round the top of table. Rest all as shown on Drg and as directed by Engr-in-Charge/GE. |
| 9 | CHAIR DINING SPECIAL DRG NO. TP Providing /supplying chair size is 530mm (w) x 500mm (d) x 980mm (h). The chair frame made in 45mm x 40mm thick. The four supported leg in 45mm x 45mm thick with carving design. The dining chairs wrapped in sumptuous fabric, it is perfect for dining and elegant evenings alike. Masterfully crafted of premium solid wood in oak finish. Kiln-dried solid wood makes it warp and scratch-resistant. Crafted of premium solid wood in oak finish. Soft seat with gently curved padded backrest offer a comfortable seating experience. |
| 10 | BED HARD WITHOUT MNF SET DRG NO. FD/E6/MAP/08(R)Shape and size all as shown on drg. All frame work including legs shall be of 38mm (18 gauge) M S II square pipe. Head board & foot board shall to be 18 mm thick both sides. Pre laminated particle board bonded with phenol formaldehyde as per IS 12823 exterior grades. BWP type shade oxford cherry N/Bhutan Board or equivalent and as approved by GE. Plywood top of bed shall be 12 mm thick BWP type commercial facing both side bounded with phynol formaldehyde BWP type. Rest all as specified and shown on drawing or as approved by GE. |
| 11 | TABLE DINING 06 PERSONS DRG NO. FD-273Overall size as shown on Drg. All wood work shall be made of 1St class seasoned hard wood. Top shall be made of 18mm thick pre-laminated particle board BWR exterior grade IS code 12823 in teak veneered shade. 4mm thick teak wood beading shall be used around the top. PVC hard rubber shoe shall be provided at the bottom of all legs. All wood surface exposed to view shall be French polished with high gloss finish. Rest all as per drawing as as directed by Engr-in-Charge. |
| 12 | BOOK CASE STEEL DRG NO. FD-1028Size:- 838(W) * 305(D) *1675(H) Finish :- POWDER COATSPCIFICATION: - Book case almirah made in CRCA sheet (Tata). Steel book case almirah Body & shelves made of 0.8mm thick and front door 1mm thick CRCA sheet. Front made of 4 transparent glass doors of 4 mm thickness having sliding shutters. The book case is fitted with cam lock with duplicate SS keys. Scissor mechanism has provided in each door receding inside the top of every compartment and it shall ensure parallel and smooth movement Full height steel upper sliding door to be provided. Height wise 3 nos fixed shelf to be provided with uniformly distributed load capacity. Metal pieces shall be welded properly strongly, Co2 welding shall be used.Provided high quality cold rolled close annealed (CRCA) sheet anticorrosion treated components, duly power coated with ten tank phosphating procedure with 60 to 70 microns. |
| 13 | MATTRESS OF SIZE 1905X914X102MM DRG NO. TP Shall be made to shape as per trade pattern. One side coir and other side foam. And as per sample approved by GE. |
| 14 | CHAIR REVOLVING EXECUTIVE WITH BACK DRG NO. TPSupplying and placing in position of high back leatherette chair in black colour with matte finish specification : durian- office seating- poise chair , type : * high back 360㸠degree revolving chair, * all over size is : 640mm (l)x 500mm (d)x 1210mm (h) , *the chair made of full leatherette in black colour . It will comes in matte finish in contemporary style . Details : * arms : fixed chrome finish arms with PU padding . * use of ply: 12 mm thick hot pressed BWR plywood (is grade - 303 for seat and back) . * seat: 40 ã± 2 mm thick polyurethane foam with density 32 (ã±3) kg per cu meter for best quality cushioning in seat , * back : 40 ã± 2 mm thick polyurethane foam with density 32 (ã±3) kg per cu meter for best quality cushioning in back . Backrest support foam design based on symmetrical lumbar support * mechanism : Centre tilt mechanism . * only seat size is 665mm (l)x 500mm (d)x 580-495mm (h) & the back size is 665mm (l)x 580mm (h) , seat maximum height is 635mm & minimum height is 540mm & back height from floor maximum height is 1210mm & minimum height is 1110mm * gas lift 85mm telescopic hydraulic * base : 650 mm shiny chrome base with nylon castors shall be 65. 0 +/- 0. 5 cm pitch-centre-dia (75. 0 +/- 1. 0 cm with castors). |
| 15 | ALMIRAH LARGE STEEL WITH SHELVES DRG NO. FD-1031Size:- 1980(h)x915(w)x480(d)mm Finish :- POWDER COATSPCIFICATION :- Almirah having size of 1980(h)x915(w)x480(d)mm with 4 adjustable shelves make five compartments. The thickness of door sheet is 20 guage and rest body 22 guage. Providing shelf made of 0.8 mm crca sheet bending 25x15 c type. It holds have height wise adjustable.Providing bracket holder 2mm duly power coated. Three-way bolting device and six lever lock with high hinges an overlapping door with mazak handle/ SS finish & 3 way locking mechanism. Provided high quality cold rolled close annealed (CRCA) sheet anticorrosion treated components, duly power coated with ten tank phosphating procedure with 60 to 70 microns. |
| 16 | CHAIR CB STEEL WITH ARM & CUSHION DRG NO. FD-360 (i) Shape & size shall be all as shown on drg. (ii) Seat and back form shall be designed with contoured member support for extra comfort & 20mm thick hot pressed plywood upholstered with fabric and moulded polyurethane foam with PVC lapping all round & the polyurethane foam shall be 50 mm thick and shall abe moulded with density 50-55 Kg per cubic mtr thick and harness 20+1-2 Kg on hampelen machine. (iii) PVC hard rubber stopper shall be provided with to the bottom of legs. (iv) Frame work shall be cantilever type powder coated MS tubular frame made out of 25 mm x 10 mm Sec. (v) Rest all as specified and shown on drg or as approved by GE. |
| 17 | TABLE OFFICE CLK STEEL DRG NO. FD-1004Size:- 2100Wx1800DX750H Finish :- LAMINATE FINISHSPCIFICATION :- Table top made of PLPB Board(BSL/OSL) with 2/.8mm thick PVC edge banding tape with as per approved laminate shade INTERIOR GRADE. EXECUTIVE TABLE WITH SIDE UNIT all made in PLPB Board, Top made in 36mm thick PLPB board. Gabelend made in 25mm thick PLPB board. Side unit made in 18mm thick PLPB All exposed edges covered with 2 mm PVC edge banding tape and non exposed edges covered with .8mm thk PVC edge banding tape. |
| 18 | PVC CHAIR WITH ARMS DRG NO. TPTrade Pattern and as per sample approval by GE/ Engr-in-Charge. |
| 19 | CHAIR VARANDHA DRG NO. FD-256The frame shall be made of 19/20mm dia Ms conduit pipe of well thickness 1.6mm Canning shall be done with 4mm wide in Godrej Pattern or as directed by Engineer-in-Charge in the seat, back, PVC/hard rubber toes shall be provided to the bottom of all legs. All stell surfaces exposed to view when placed in position shall be painted with two coat of red oxide primer after preparation of surfaces as directed by Engr-in-Charge. Painting shall be done with spray machine. Rest all as specified and shown on drg or as directed by Engr-in-Charge. |
| 20 | CHAIR EASY DRG NO. FD-229Over all size as shown on Drg. First class seasoned hard wood shall be used for complete wood work. 12mm thick exterior grade BWR phenol- bonded plywood, commercial veneered both sides shall be fixed to rails with steel nails. The seat ply shall be covered with removable 75mm thick 32 density foam with upholster with letherised rexine of approved shade and texture. 3mm thick plywood commercial shall be fixed over the wooden frame of the back rest over which 50mm thick 32 density foam with upholster with letherised rexine of approve shade and texture. Cushion foam upholstered and leatherised rexine shall also be provided over the wooden arm as shown on drawing. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish. Hard rubber toes shall be provided to bottom of legs. Rest all as per drg and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
