|
| 1 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, manholes, etc n.exc 10 Sqm plan and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning, filling in, including spreading levelling, watering and well ramming in layers n.exc 25 cm using soils complete all as specified & directed. |
| 3 | Removal of surplus excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point as in soft/loose soil complete all as specified and directed. |
| 4 | Demolition of stone/brick masonry built in cement mortar incl all quions,Arches, pillers etc complete all as specified and directed. |
| 5 | M&L for brick work with using sub class 'B' brick ,straight or curved on plan exc. 6 meter radius, built in CM (1:6) for wall complete all as spfd and directed. |
| 6 | Taking down cement plaster of any description on brick or stone walls or from concrete surface incl racking out joints hacking for key scrubbing with water etc all as specified. |
| 7 | M&L for rendering 15mm thick with CM 1:4 on fair face and other than fair faces of brick work, finishing fair and even without using extra cement complete all as spfd & directed. |
| 8 | M&L rendering 5 mm thick in C M 1:3 on concrete surfaces as in ceiling and finished even and smooth without using extra cement including taking down of existing plaster complete all as specified and directed. |
| 9 | M&L for applying three coats of white wash on ceilings surfaces of old/new, any description complete all as specified including preparation of old concrete/plastered surface complete all as specified and directed |
| 10 | M&L for preparation of old/ newly plastered surfaces of wall and applying two coats of weather proof exterior paint or apex (any colour) silicon based over a coat of water based suitable primering as a base course as per manufacturer's instructions including necessary scaffolding upto any height complete all as specified and directed by Engr- in Charge. |
| 11 | M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description complete all as specified including preparation and complete removal of existing treatment complete all as specified and directed |
| 12 | Preparation of old painted wooden and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) complete all as specified and directed. |
| 13 | Preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamperwith 1mm thick wall vare putty complete all as specified and directed |
| 14 | Preparing old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed. |
| 15 | Demolition Reinforced cement concrete (reinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 16 | M&L Providing cover slab 1:2:4 type B 1 using 20 mm graded aggregate set in cement mortar 1:6 as in cover slab including placing in position complete all as spfd and directed ( Note : - reinforcement shall be measured and paid separtely under respective item of sch A). |
| 17 | M&L for TMT 10 mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, beam and Fdn, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips complete all as specified & directed. |
| 18 | Demolition Cement concrete(unreinforced) of any description and any position, & thickness (below or above ground level) complete all as specified and directed. |
| 19 | M&L for cement concrete (Nominal mix with mixture machine) Type B1 1:2:4 (20mm graded stone aggregate) in Beams, lintel/roof beam, similar work etc complete all as specified and directed. |
| 20 | M&L for Plain cement concrete 1:5:10 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, sunken floor,filling and mass concrete complete all as spfd and directed. |
| 21 | M&L for PCC 1:3:6, type C1 ( using 20 mm graded stone aggregate ) as in leveling course, coping, benching, flooring,surface channel / sub base drain finishing cement concrete surface incl forms / mould complete all as spfd and directed. |
| 22 | Supply and applying in sunken portion two component elastomeric acrylic polymer modified cementitious waterproofing coating,smart damp block 2k suprema or approved equivalent,having 100% elongation as per ASTM D412.resisting 5 bars hydrostatic pressure as DIN 1048,reduction to rapid chloride shall be 70 as per have food grade certificate from laboratories like CFTRI coverage is 1.5 kg/sqm the mixing ratio of the coating shall be 2 parts of powder & I part of liquid without any water addition in the mixing including epoxy type material for joints of pipes of any type in floor or wall as per site requirement etc complete as per manufactures specifications. complete all as spfd and directed by engr -in -charge. |
| 23 | M&L for Providing and Repairing the damaged concrete portion / Surface preparation with single component ready to use, repair mortar SMARTCAE REPAIR MORTAR capable of applying 20 mm avg. thick in single layer initially by hand and finishing with trowel, carefully compacting the same around the rebars and finishing to bring it in line with existing concrete surface complete all as specified and directed by engr-in charge.. |
| 24 | M& L for cement concrete padding 1:2:4 type B0 (12.50 mm graded stone aggregate ) 40 mm thick in sunken of bath /toilet /Kitchen etc with and including WPC as per manufacture's instruction complete all as spfd and directed by engr -in -charge. |
| 25 | Supplying only liquid water proofing compound ISI Makrs (used 200ml / bag of cement complete all as specified and directed. |
| 26 | M&L for 15mm thick plastering in CM 1:4 with WPC on concrete surfaces of finishing the surface even & smooth complete all incl water proofing compound all as specified and directed. |
| 27 | M&L prepolished, machine pressed chequred cement concrete coloured tiles 30cm x 30cm x 25 mm thick, set , jointed and pointed in neat cement slurry with mixer of white cement and pigmenet as in floors/pavements/ paths laid over screed bed or bedding layer in cement mortar 1:4, 20 mm thick screed bed complete all as specified and directed. |
| 28 | M&L PCC 75 mm thick (1:3:6) type C-1 using 20 mm graded aggregate, plinth protection / sub base etc complete all as specified and directed. |
| 29 | S&F pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, washer as specified. |
| 30 | M&L roof truss (framed) trussed, purlins, crane gantries, rails , box type section and fasterning and heavy bracket framing (Beam, tee, angle, M S plates etc including steel primer coat, welding, distnace pieces cleats etc confirming to Fe290 grade E-165 complete all as specified and directed. |
| 31 | M&L for applying two coats of synthetic enamel paint on new steel surfaces over a coat of primer of any description complete all as specified including preparation complete all as specified and directed |
| 32 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRCO.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm,with semi perforated 12mm thick micro tegular edged GRG false ceiling suspended from ceiling using galvanized mild steel items. (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded. hanger rod upto 1000mm length and L- shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 33 | M&L for PVC SHEET WALL PANELLING of thickness 5mm Solid consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site) |
| 34 | S&F PVC (SWR) pipes 110 mm bore, single socketed, in any length with rubber ring joints, fixed to walls/ floor etc. complete all as specified and directed. |
| 35 | S&F PVC (SWR) bends/ T any radius, with access door, for 110 mm bore of pipe complete all as specified and directed. |
| 36 | S&F PVC (SWR) pipes 75 mm bore, single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 37 | S&F PVC (SWR) bends/T any radius, with access door, for 75 mm bore of pipe complete all as specified and directed. |
| 38 | Cleaning and removing all scale and dirt, etc. from tanks and form mouths of circulating pipes, etc., capacity of tank exc 250 & n exc 500 litres including writing date of cleaning on the tank with suitable synthetic enamel paint etc complete all as specified and directed. |
| 39 | M&L for Cleaning of septic tank up to 25 users by removing sludge in semi solid sate or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 40 | M&L for Cleaning of septic tank exc 25 users and not exc 50 users by removing sludge in semi solid sate or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5 km but n exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 41 | M&L for Cleaning of septic tank exc 50 users and n.exc 100 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 42 | M&L for Cleaning of septic tank exc 100 users and n.exc 200 users by removing sluge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 KM but n. exc 2 KM out of MOD land and buried into ground by digging pits spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 43 | M&L for cleaning with suitable chemical of P/S trap of EWC/IWC etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out ofMOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 44 | M&L for cleaning of Nahani/floor trap of Bath/kitchen/urinal/ wash basin incluing Ist gully trap etc by removing all blockage of any description in any situation in the system and removal of sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc1.5km but nexc 2KM out of MOD land and buried into ground by digging pits and spray a layer of bleaching @ 0.50 kg per sqm area to avoid any type of infection in enviornment complete all as specified and directed. |
| 45 | Dismantling floor, heart wall tiling including cement and sand mortar bedding ( but not backing ) including rubbish off the premises complete all as specified and directed. |
| 46 | M&L for non- skid coloured creamic tiles (1st quality/ premium quality) 7 to 8 mm thick, ( square/ rectangular) area of each tiles exc 0.11 sqm but n exc 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in coloured or white cement to match the colour of tiles as in floor over 10 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 47 | M&L for glazed coloured ceramic tile ,first quality( of approved class , colour and design/ dark shade ) of size 300 x 450x7 / 350x450x7 / 350x250x7 thick in vertical surfaces, as in dado / skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over with and including 10 mm thick rendering in cement mortar (1:4), rough finish to receive the tiles complete all as specified and directed. |
| 48 | M&L for repair of old aluminium doors any type and size, with extruded built up standard tubular sections/ appropriate Z sections and other sections including taking down and refixing in same opening of door shutter or frame/ chowkhat n exe. 3.0 sqm, fixing with dash fasteners of required dia and size, hinge 150 mm size, 02 no of aluminium door handle, required necessary tower bolt, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge. Note:- Required glass, Double action floor spring hydraulically regulate, automatic hydraulic door closer, mortic lock for aluminium door shall be paid separately complete all as directed. |
| 49 | M&L for repair of old aluminium/ window any type and size ( double/three track), ventilator with shutter, and partition (fixed portion), with extruded built up standard tubular sections/ appropriate Z sections and other sections including taking down and refixing in same opening of window, ventilator, and partition orshutter, frame/ chowkhat n exe. 1.50 sqm, fixing with dash fasteners of required dia and size, hinge 150 mm size, 02 no of aluminium door handle, required necessary tower bolt, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per directions of Engineer-in-Charge. Note:- Required glass shall be paid separately complete all as directed. |
| 50 | Re-securing or easing and adjusting without taking down shutters of any description exc. 1.0 sqm but n exc 2.0 sqm each complete all spcified and directed. |
| 51 | M&L welding in repairs exc. 2.5 cm but n exc 5.0 cm in length and not exc 6.0 mm thick complete all specified and directed. |
| 52 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) not exc 1.5 Sqm each complete all as specified and directed. |
| 53 | Taking down chowkats or frame with shutter (without taking off shutters from the frame) exc 1.5 Sqm but n.exe 4.00 Sqm each complete all as specified and directed. |
| 54 | Taking down shutters of any description exc 1 Sqm but n. exc 2 Sqm each complete all as specified and directed. |
| 55 | S&F framed work such as guard bars, grills , hold fast, door frame etc and similar work confirming to Fe-410-0 or Fe-310-0 complete all as specified and directed. |
| 56 | M&L factory made 30 mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, provided with stiles and rails as specified in SSR Part-I Section-8 clause 8.20 (a) fixed to chowkats complete all as specified and directed |
| 57 | M&L factory made 30 mm thick flush shutter, solid core contruction, with block board core and plywood face panels commercial type on both side fitted to chowkats complete all as specified and directed |
| 58 | S&F factory made 35 mm thick 2nd class HW plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed |
| 59 | S&F PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet etc.complete all as specified and directed. |
| 60 | S&F factory made solid panel pvc door shutter with 30 thick (style) consisting of frame made out of M.S tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stiles and plain colour pvc sheet for top rail, lock rail, bottom rail on eigther side and gap insert top rail and bottom rail; Panelling of plain colour pvc sheet to be fitted in ms frame welded/sealed to stiles & rails with suitable PVC sheet beading, and joint togther with solventcement, as per drawing specification complete all as specified and directed, |
| 61 | S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 62 | M&L for PCC 1:3:6, type C-1 (using 20mm graded stone aggregate) for embedding of hold fast etc including desterb surfase of existing pogition complete all as specified and directed |
| 63 | M&L for preparation of new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 64 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated steel surfaces complete all as specified and directed |
| 65 | S&F in repair SS butt hinges, medium weight, cold rolled mild steel, and fixed (Size of hinges in 125 mm) complete all as specified and directed. |
| 66 | S&F in repairs 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 67 | S&F 150mm long aluminium handles, cast type, anodized and fixed complete all as specified and directed. |
| 68 | S&F in repairs alunimium sliding door bolt 300 mm long stove enamealled black with bright bolt not less than 16 mm dia with and including and minimum of 6 boalts and nuts four on bolt plat and two on staple plate and fixed etc complete all as spfd and directed. |
| 69 | S&F in repair 300 mm long , mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as spfd & directed. |
| 70 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised. (30mm Width of flaps when open) complete all as specified and directed. |
| 71 | S&F in repair 18 to 20 mm thick solid PVC Board for cupboard/cabinet shutters with one side 1 mm thick printed PVC sheet other side plain PVC sheet of approved pattern as per specification and drawing and incl necessary beading in matching colour, magnetic ball catcher, 1 brass 2 lever lock of 50 mm complete all as specified and directed. |
| 72 | S&F aluminium body as per requred mortice lock, verticle type, size 100 mm aluminium door 4 lever complete all as specified and directed |
| 73 | S&F in Repair of double action floor spring hydraulically regulated for aluminium door, made up of minimum 1.25 mm thick aluminium alloy steel sheet foundation box , main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 74 | S&F in repair automatic hydraulic door closer, heavy duty with pivot , aluminium body, ISI marked, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 kg 80 kg complete all as specified and directed. |
| 75 | M&L for refixing of old glass panes with putty and nails etc complete all as spfd and directed by engr-in charge. |
| 76 | M&L for renewal of old putty of glass pane complete all as specified and directed. |
| 77 | M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed or bedding layer in cm (1:6) complete all as specified and directed. |
| 78 | M&L for 18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms , wash hand basin slab, urinal partition etc and like over and including 15 mm thick bedding in cement mortar (1:4) pointing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including Dismentling of stone slabs and tiles of any description or thickness in floors, approns etc,laid bedded and pointed in any mortar complete all as specified and directed by Engr-in charge. |
| 79 | M&L for 15mm thick rendering in CM 1:6 on surfaces of wall finished surface fair & even complete all as specified and directed. |
| 80 | M&L Repairs to plaster with cement mortar 1:4 of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 81 | M&L Preparation of old/newsurfaces of Ceiling, plastered on un plastered by brooming down or steel wire brushing, and applying one coat of white wash complete all as specified and directed. |
| 82 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 83 | S&F Kitchen Plate rack with & including shelves and hanging arrangements for utensil for kitchen , made of stainless steel sheet 0.63 mm thick ,size 900 mm x 600mm x 250mm complete all as specified and directed. |
| 84 | S&F floor door stopper double leg of aluminium alloy body of 70 mm length with aluminium base plate of size 50 mm x 40mm complete all as specified & directed. |
| 85 | S&F in repair fancy type angle cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. |
| 86 | S&F in repair fancy type, stop cock regular body 15 mm nominal bore with flange, brass, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed. |
| 87 | S&F in repair 20 mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 88 | S&F in repair pillar taps,with capston heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and directed. |
| 89 | S&F in repair 125 mm size chromium plated brass shower rose with swivel joints and swivel arms for fixing with 15 mm pipe complete all as specified and directed. |
| 90 | S&F in repair 125 mm size chromium plated grating complete all as specified and directed. |
| 91 | S&F in repair towel rail ,D type, brass, chromium plated, fancy type, 60 cm long between flanges fixed with and including CP brass screws, rawl plug etc complete all as specified and directed. |
| 92 | S&F in repair Chromium plated brass wall mixer for mixing hot & cold water screwed down for iron pipe complete with wall Flange (without Hand & over head Shower) screwed down for 15 mm bore GI pipe complete all as specified and directed. |
| 93 | S&F in repair Chromium plated brass central hole Basin Mixer without Popup Waste system complete screwed down for 15 mm bore GI pipe complete all as specified and directed. |
| 94 | S&F in repair SS fancy type curtain rod shall be 25 mm dia of including bracket rings,fancy knob , curtai ring 08 Nos minimum including all fixing arrangement complete all as specified and directed. |
| 95 | S&F in repair 20 mm dia bore ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/2 0mm-210gms./25mm-455gms/ 40mm- 690 gms) complete all as specified and directed. |
| 96 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 97 | Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed. |
| 98 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15mm dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing or Concealed work, i/c cutting chases and making good the wall etc. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. |
| 99 | M&L for Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills sunshades, shelves lintels etc and cutting chases for concealed water pipe etc and making good cutting not exc 10cm.complete all as specified and directed. |
| 100 | Supply, fixing, laying & testing 15 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 101 | S&F door seal bottom, rubber shield, anti rust, brown colour black rubber as per required door size including necessary screws etc., all as specified as directed. |
| 102 | Supply, fixing, laying & testing 20 mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 103 | S&F in repair Waste coupling to WHB/ kitchen and laboratory sink of 32/40 mm dia complete all as directed by Engr in Charge, |
| 104 | S&F in repair PVC Waste pipe( streachable) to WHB/ kitchen sink of 32 mm dia complete all as directed by Engr in Charge, |
| 105 | S&F in repair GI Elbow/Tee/Socket of 15 mm dia to be fixed in any position and at any height complete all as directed by Engr in Charge, |
| 106 | S&F in repair GI Union of 15 mm dia to be fixed in any position and at any height complete all as directed by Engr in Charge, |
| 107 | S&F PVC water tank covers for 500/1000 ltr capacity. |
| 108 | Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc.500 liter and removing from site complete and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed. |
| 109 | S&F in repair for 600x450mm beveled edge looking mirror of selected quality glass 4 mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified & directed. |
| 110 | S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 111 | S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed. |
| 112 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm with & including one waste fitting with long screwed shanks and fly nuts, flange end bedded in red lead cement ,with PVC coupling, PVC waste pipe 40mm bore 750mm long complete all as specified and directed. |
| 113 | Surface excavation in soft/loose soil n.exc 30cm deep and averaging 30cm deep and getting out, including cutting to required gradient and camber as for formation of roads berms complete all as specified & directed. |
| 114 | M&L for hard core of broken stones or boulders of gauge not exc 63mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified. |
| 115 | M&L for PCC 1:5:10 (75mm thick) Type E-2 using 40 mm graded aggregate as in floor & subbase, similar work etc complete all as specified and directed.. |
| 116 | M&L for 25 mm thick sand cushion layer for laying interlocking pavers complete all as specified and directed. |
| 117 | M&L for 80 mm thick precast PCC interlocking coloured paver rubber moulded block factory made of grade M 40 single layer monolithic high density manufactured by electro vibro hydraulically operated block making maching conforming to IS -15658- 2006 laid and jointed over sand cushion layer complete all as specified and directed. Note : Sand cusion shall be measured & paid separately |
| 118 | Demolition Cement concrete(unreinforced) of any description and any position, n exe 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 119 | M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 120 | M&L preparation of newly concrete surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of priming paints plaster coat etc. complete all as specified and directed. . Please Enable Macros to View BoQ information |
| 121 | M&L preparation of newly concrete surfaces of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint (any tint) over a coat of priming paints plaster coat etc. complete all as specified and directed. . Please Enable Macros to View BoQ information |
