|
| 1 | M & L for complete removal of existing treatment from surface of wall all as specified and as directed by the Engineer-in-Charge |
| 2 | M & L for one coat of acrylic water based exterior grade primer @ 0.9 litre (undiluted)/ 10sqm diluted with water in 1:1 ratio on old surface for painting of subsequent coats complete all as specified and directed. |
| 3 | Taking down cement or cement lime plaster on brick or concrete surface including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.. |
| 4 | M&L for rendering 10mm thick on fair faces of wall even and smooth finish without using extra cement on conc/brick surfaces in CM 1:6, complete all as specified and as directed |
| 5 | M&L for preperation of new plastered surface and applying three coats of white wash on newly plastered surfaces of ceiling/wall complete all as directed. |
| 6 | M & L for preparation of existing surface of walls by brush, sand paper, surface repair required and applying 1mm putty on old plastered or un-plastered surface of wall/ceiling all as specified and as directed by the Engineer-in-Charge |
| 7 | M & L for applying two coat of oil bound distemper all as specified and as directed by the Engineer-in-Charge |
| 8 | M&L for preparation of existing surface of walls by brush, sand paper, surface repair if required , filling putty in holes etc and applying one coat of oil bound distemper white or any tint complete all as specified and directed. |
| 9 | M&L for preparation of old plastered or un-plastered surface of walls and applying one coat of white wash (lime) complete all as specified and directed . |
| 10 | M&L for preparation of old plastered or un-plastered surface of ceiling and applying one coat of white wash (lime) complete all as specified and directed . |
| 11 | M&L for preparation of old plastered surfaces and applying a coat of cement based paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed. |
| 12 | M&L for preparation of existing surface and applying two coats of cement based paint upto 16 meter height of the bldg, complete all as specified and directed. |
| 13 | M&L for preparation old treated surface of wall of OH Tank upto height of 12m to 18M and and applying a coat cement based paint including necessary scaffolding/ staging and formwork complete all as specified and directed complete all as specified and directed. |
| 14 | M&L for preparation old treated surface and applying a coats of exterior emulsion acyrlic weather proof antifungal paint upto 16 meter height of the bldg, complete all as specified and directed. |
| 15 | M&L for complete removal of existing treatment and preparation of surfaces of walis by scrapping /sand preparing / rubbing and finally washing with watering and applying a coats of interior emulsion acyrlic paint over a coat of exterior grade arimer, complete all as specified and directed. |
| 16 | M&L for preparation of existing surface and applying a coats of terracotta paint on walls, facia , cornice, chajja upto 16 meter height of the bldg, complete all as specified and directed. |
| 17 | M&L for preparing old or previously treated surfaces of wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint to match the existing surfaces, complete all as specified and directed. |
| 18 | M&L for preparing old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 19 | Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed. |
| 20 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 21 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 22 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 23 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 24 | M&L for writing or repainting letters or figures (Block, Roman, Italic, Indian) exc 15cm but n.exc 30 cm in height and line of letters figures n.exc 2cm wide (Bldg No / Name ) etc with one coat of synthetic enamel paint all as specified and as directed. |
| 25 | S&F in repair 3 mm thick sheet glass, Ordinary quality and glazing in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass(any thickness, size, quality or description) from wooden or steel frame surround complete all as specified and as directed |
| 26 | S&F, in repair galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 27 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 28 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed. |
| 29 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 30 | M&L for Vitrified Ceramic tiles 600x600mm, 7-8 mm thick (square/ rectangular) polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 31 | M&L Vitrified Ceramic tiles 600x600mm, 7-8mm thick as in skirting fixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 32 | M&L non skid ceramic colour tiles 400x400mm, 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm set and jointed in neat cement slurry and pointed in colour cement to match as in floor complete all as specified and as directed |
| 33 | Material and labour for colour printed glazed ceramic tiles (300x 450mm, 6 to 7mm thick as in wall,dado/skirtings set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement plaster in cement mortar (1:4) complete all as specified and as directed by the Engr-in-Charge. |
| 34 | Dismantling of asbestos/ CGI cement (corrugated, semi-corrugated) etc sheets in roof covering including ridges etc complete all as directed. |
| 35 | S & F for pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 36 | S & F for pre-painted galvalume aluminum zinc coating GI based double ribbed trapezoidal profile steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |