|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: CWE WELLINGTON NAME OF WORK: SPECIAL REPAIR/REPLACEMENT OF HT UG CABLE FROM SUB STATION NO. 01 TO SUB STATION NO. 02 AND ALLIED WORKS UNDER GE DSSC WELINGTON Contract No: CWE/ WEL/ OF 2025-26 Bidder Name : SCHEDULE 'A' (BOQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Item of Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Conversion against each Item Quoted Currency in INR / Other Currency Rate in Figures to be entered by the Bidder including all Taxes etc.Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category Total amount TOTAL AMOUNT With Taxes Total amount in words |
| 2 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 3 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in hard/dense soil complete all as specified and directed. |
| 4 | Removing excavated soil not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 5 | Supply & Spreading clean dry riddled sand in trenches for cushioning for under ground cables protections (below, above and around the cable laid in trenches) complete all as specified and directed.(Note: Thickness after punning down shall be measured for payment) |
| 6 | Supplying and laying un-reinforced precast concrete cable cover, class HV, type 1 flat, size 300mm x 180mm x 40mm complete all as specified and directed. |
| 7 | M & L for 100 mm bore, steel tubes, galvanised, light grade with all fittings, laid in trenches, laid under road/ fixing on wall/crossing drain/nallah etc as in cable protection including all fittings and fixing accessories complete all as specified and directed. |
| 8 | M & L for cutting existing roads/ hard standing/ PCC/WBM etc for laying LT cables through pipes of any size n.exc 45cm depth and 25cm width and making good the damaged surfaces complete as per the existing specifications of roads/ hardstanding/ path etc to match with the existing surfaces or with PCC 1:2:4, type B-1 (Using 20mm graded stone aggregate) complete all as specified and directed. |
| 9 | Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 11000 volts grade with stranded aluminium conductor of size 95 Sqmm 3 core including taking up or down existing unserviceable UG cable and removing from the site complete all as specified and directed. (Note: Excvation and earth work shall be measured and paid seperately) |
| 10 | S & F Cable jointing kit for 11 KV (Earthed) grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed (Excavation and earth work shall be measured and paid seperately) |
| 11 | S & F Cable jointing kit for 11 KV (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as specified and directed (Excavation and earth work shall be measured and paid seperately) |
| 12 | S & F Cable path indicator for HT 11 KV, made of MS Cast iron round die cast 4 inch dia round plate, 2 mm thickness fixed on MS angle iron of suitable size of length 2.5 feet, brown colour, very clear front and clean moulding fixed on ground with provn of PCC 1:3:6, type C-1 (using 20mm graded aggregate) block of suitable size including necessary excavation and earth work complete all as specified and as directed. Total in Figures 0.0 0.0 Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
