|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: GE (ARMY) AHMEDABAD NAME OF WORK : REPAIR AND MAINT OF STEEL FURNITURE INCL PAINTING UNDER BSO AT AHMEDABAD CANTT CONTRACT AGREEMENT: GE (A)/ABD/ OF 2026-2027 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item of Work Item Code / Make Quantity Unit Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT (in Words) |
| 2 | S&F of follwing parts of Almirah Med/small steel with overall Size 4275 sqmm 1270H x 765W x 440D including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete. (FD-67M, FD-1032) |
| 3 | Lock of 50 mm 6 lever as per Drg. |
| 4 | Handle of size 150 mm as per Drg. |
| 5 | Welding (in lieu of stopper) shelves of Almirah med steel complete all as directed. |
| 6 | Hinges of 150 mm as per Drg. |
| 7 | M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Med/small steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed. |
| 8 | S&F of follwing parts of Almirah Steel Large with Shelves of size 1085x920x485 including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete.FD-1031 |
| 9 | Lock of 50 mm 6 lever as per Drg |
| 10 | CP Handle of 150 mm as per Drg. |
| 11 | Welding (in lieu of stopper) shelves of Almirah Large steel complete all as directed. |
| 12 | Hinges of size 150 mm as per Drg. |
| 13 | M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Large with shelves. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed. |
| 14 | S&F of follwing parts of Almirah Steel Large 1/2 H x 1/2 S of size 1085x920x485 including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete.FD-1033 |
| 15 | Lock of 50 mm, 6 lever as per Drg. |
| 16 | CP Handle of 150mm per Drg. |
| 17 | Welding (in lieu of stopper) shelves of Almirah Large steel complete all as directed. |
| 18 | Hinges of size 150 mm as per Drg. |
| 19 | M&L Spray painting one coat with synthetic enamel paint in side and out side of Almirah Large 1/2H x 1/2S steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed. |
| 20 | S&F of follwing parts of chair CB steel with arms and Chair CB Steel without arms including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Overall size 2696 sqmm 535W x 560D x 900H FD-75(M) |
| 21 | Seats of second class hardwood duly cushioned with 40 density Cushion Foam of Kurlon/Sleepwell covered with Cloth/raxine (quality approved by Engr-in-Charge) supported with 12mm Ply and Stiffner of size 50x5 mm welded on Frame all as specified and shown on Drg of CBA Cushioned |
| 22 | Back of second class hardwood duly cushioned with 40 density Cushion Foam of Kurlon/Sleepwell covered with Cloth/raxine (quality approved by Engr-in-Charge) supported with 12mm Ply and Stiffner of size 50x5 mm welded on Frame all as specified and shown on Drg of CBA Cushioned |
| 23 | Arms rest of PVC of 350 mm complete as per Drg. |
| 24 | Top cap of 25 mm of best quality in the same position complete and all as specified. |
| 25 | Welding to damages/decayed steel frames of chair CB steel with arms complete all as directed. |
| 26 | M&L for spray painting to steel frame of chair CB steel with arms and without arms with one coat of synthetic enemal paint best quality after preparation of steel surface complete all as specified and directed. |
| 27 | S&F of follwing parts of Charpoy folding IP with Hard Top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Over all Size - 1980x900x400 FD-388(R) |
| 28 | Plytop 12mm thick of BWR grade ISI marked confirming to IS-303 of size 1980x900 mm Make : Greenply/Kitply/Century in two pieces of size as shown in Drg and fixed with 10 nos. nut and bolts to charpoy folding IP with hard top all as specified and shown in Drg. |
| 29 | M&L for spray painting one coat of synthetic enamel paint OG/Black to all steel surface after preparation of old painted surface by applying sand paper and filling with putty wherever required to charpoy folding IP hard top all as specified and directed. |
| 30 | S&F of follwing parts of Locker Bed Side steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of over all size-1100x760x440 (FD-1029) |
| 31 | CP handle of 150mm as per Drg. |
| 32 | Welding (in lieu of stopper) shelves of Locker bedside steel complete all as directed. |
| 33 | Hasp and Staple as per drg. |
| 34 | Hinges of 150mm as per Drg. |
| 35 | M&L Spray painting one coat with synthetic enamel paint in side and out side of Locker Bedside steel. Painting work all shall be done after removing old paint from the article and smoothing the surface including denting work (dents) where necessary complete all as directed. |
| 36 | S&F of follwing parts of Table Office Clerk Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of overall size- 1230x760x600 mm FD-84(M) & 1004 |
| 37 | Table top of 1230x600 mm , 18 mm thick prelaminated Particle board, one side decorative lamination and other side balancing white lamination, exterior grade with 4 mm thick Teak wood beading duly French polished complete all as specified and as directed. |
| 38 | Drawers of 450x320x100 mm made out of MS sheet of 20 gauge as per existing pattern and size complete all as specified and as directed. |
| 39 | Rubber shoes PVC superior quality to legs of table offfice clerk steel all as specified and shown on Drg n directed |
| 40 | M&L for applying one coat of synthetic enamel paint, olive green/gray colour to Table office clerk steel rest including preparation of old surfaces complete all as specified and as directed. |
| 41 | Charpoy IP hard Top : S&F of following parts of Charpoy hard top including dismantling of old unserviceable parts without disturbing the other parts made to shape and size as shown on drg. Complete all as specified and directed. Overall Size-1980x900x440 cm. FD/MAP-II/11 |
| 42 | Top : M&L for removing of old u/s plywood top from Charpoy IP Hard Top and S&F new plywood top 12mm thick of BWR grade ISI marked confirming to IS 303 Make : Kitply/Archidply/Century in one piece of size as shown in drg and fixed with 08 Nos. nut & bolts to bed hard all as specified and shown in Drg and as directed. |
| 43 | Paint : M&L for spray painting one coat of synthetic enamel paint OG/Black to all Charpoy IP Hard Top steel surface after preparation of old painted surface by applying snd paper and filling with putty wherever required to bed hard all as specified and directed. |
| 44 | S&F new ms complete frame of charpoy IP Hard Top consist of two long rails of size 1980x32x32mm(16 Gauge) and 2 short rails of size 900x25x60mm(16 Gauge). legs of size 440x32mmx32mm (16 Gauge) to be welded to long rails and short railsalong with two stiffeners of size 25mmx25mm (16 Gauge) as shown drawing . |
| 45 | S&F of follwing parts of Bed Hard Steel with ply wood top including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete.Over all size - 2050x980x830 mm FD/E6/MAP/08(R) |
| 46 | Head rest of 830x250 mm with 18mm thick pre-laminated Particle board Exterior Grade Make : Greenlam/Century/Kitply, all as specified and shown in drg and as directed . |
| 47 | Foot rest of 830x250 mm with 18mm thick pre-laminated Particle board Exterior Grade Grrenlam/Century/Kitply ISI all as specified and shown in drg and as directed. |
| 48 | Plywood top from bed hard of 12mm thick of BWR grade ISI marked confirming to IS 303 of size 2050x980 mm Make : Greenply/Kitply/Century as shown in drg and fixed with 08 Nos. nut & bolts to bed hard all as specified and shown in Drg and as directed. |
| 49 | S&F new ms complete frame of Bed Hard Steel consist of two long rails of size 2000x90x35mm(16 Gauge) and 2 short rails of size 900x45x60mm(16 Gauge). to be welded to long rails and short railsalong with three stiffeners of size 25mmx25mm (16 Gauge) as shown as per drg Bed Hard Steel . |
| 50 | M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all bed hard steel surface after preparation of old painted surface by applying sand paper and filling with putty wherever required to bed hard complete all as specified |
| 51 | S&F of follwing parts of Table Bed Side Steel including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing Overall Size-550x550x330 mm FD-157 |
| 52 | Top of size 550x330 mm made out of 18/19mm thick Prelaminated Particle Board complete all as specified and shown on Drg. |
| 53 | M&L spray painting with one coat of black/white/Gray/OG enamel paint best quality to all exposed steel surface of table bed side steel complete all as specified and shown on Drg. |
| 54 | Welding to broken frame of Table Bed Side steel complete all as directed. |
| 55 | Repair to Chair Varandah Cane as per following descriptionOverall size- 760X600 mm (FD-256) complete. |
| 56 | M&L for welding to broken steel frame of chair verandah by welding machine complete. |
| 57 | Removing an scratching of old paint and repainting the chair completely with spray painting one coats of paint white synthetic enamel over a coat of primer all as specified and complete. |
| 58 | Chair School With Hand Board 738X585 MM FD/E6/MAP/05 |
| 59 | Removing existing Hand board from existing chair school with hand board and S&F Hand board of size 585 mm x 300 mm made out of 18 mm thick pre-laminated MDF board, exterior grade duly covered along with providing 4 mm thick teakwood beading all around all as specified and complete. |
| 60 | Removing existing Openable hinges Table to slide ROD of 25mm for adjustable from existing chair school with hand board and S&F new hinges and complete as per drg. |
| 61 | Removing existing PVC Back & Seat from existing chair school with hand board and S&F new PVC back & Seat of 738x585 mm all as specified and complete. |
| 62 | Provide pvc shoes superior quality as approved and complete. |
| 63 | M&L for spray painting one coat of synthetic enamel paint Black to all steel surface after preparation of old painted surface by applying sand paper and filling with putty wherever required to chair school with hand board all as specified and complete. |
| 64 | S&F of follwing parts of Repair to SHOE RACK STEEL (MAP DRG) including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing of over all size 880x700x300 mm FD/E6/MAP/02( R ) complete. |
| 65 | Welding to frame of shoe rack with welding machine after scratching and cleaning the steel surfaces all as directed complete. |
| 66 | Rubber shoes PVC superior quality to legs of shoe rack all as specified and shown on Drg and directed complete. |
| 67 | M&L spray painting with one coat of black enamel paint best quality to all exposed steel surface of shoe rack complete all as specified and shown on Drg n directed complete. |
| 68 | S&F of follwing parts of Chair Varandah including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete Over all size- 940x455 mm Map Drg FD No-(FD/MAP-II/06) complete. |
| 69 | PVC sheet of 460x460 mm superior quality ie 1st quality white colour shall be mat pattern complete all as specified, shown on drawing and complete. |
| 70 | PVC back of 460x460 mm superior quality ie 1st quality white colour shall be mat pattern complete all as specified, shown on drawing and complete. |
| 71 | PVC rubber shoes all as per existing and complete. |
| 72 | M&L for preparing of old surface of chair verndah & applying one coat of synthetic enamel white paint and complete. |
| 73 | S&F of follwing parts of chair writing including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size all as shown on drawing complete of Overall size 0.0149cm 500x950 mm (FD/E6/MAP/12) complete. |
| 74 | Handle with inner and outer size of 210mm and 230mm respectively and fixed to chair writing all as specified in drg and complete. |
| 75 | Cushion seat of 530x450 mm of foam density of 32 D of Make : Sleepwell/Kurlon covered with fabric cloth of not less than Rs 300/meter and all as specified in drg and complete. |
| 76 | Cushion back of 530x450 mm of foam density of 32 D of Make : Sleepwell/Kurlon/Dunlop covered with fabric cloth of not less than Rs 300/meter and all as specified in drg and complete. |
| 77 | M&L for painting to steel frame of chair writing with spray painting one coat of black synthetic enamel paint best quality after preparation of steel surface complete all as specified and complete. Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
