|
| 1 | Earth work in excavation in ordinary soil in all of foundation trenches including dressing of the side and ramming of bottom. Lifts upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. |
| 2 | Dry brick on edge flooring in required pattern with bricks of class designation 150 including filling joints with Jamuna sand (with F.P.S. bricks) complete. |
| 3 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 4 | Cement concrete with 4cm Guage Approved Stone ballast , Coarse Sand& Cement in the proportion of 8:4:1 including Supply of all material, Labour, Tools & Plants etc required for Proper completion of the work. UPPWD/SOR/281/P-17 |
| 5 | M-150 brick work in 1:4 cement and Coarse sand of ( 2.20 fineness modulous) mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work . UPPWD/SOR/303+(305) |
| 6 | concrete with 2cm Guage Stone grit , Coarse Sand& Cement in the proportion of 4:2:1 including Supply of all material, Labour, Tools & Plants etc required for Proper completion of the work. UPPWD/SOR/279a/P-17 |
| 7 | M-150 brick work in 1:4 cement and Coarse sand of ( 2.20 fineness modulous) mortar in plinth level upto floor V including supply of all material, labour and tools and plants. ect. required for proper completion of work . UPPWD/SOR |
| 8 | Providing and laying in position Specified Grade of reinforced cement Concrete, Excluding the Cost of Centering, Shuttering, Finishing and reinforcement - all work up to plinth level: (Cast In Situ) 1:1.5:3 (1 Cement : 1.5Coarse Sand: 3 Graded Stone Aggregete 20mm Nominal Size). |
| 9 | Reinforced Cement concrete work in walls (any Thickness ), including attatched Pilasters, Buttresses, plinth and String courses , fillets , columns, pillars piers, abutments , posts and struts etc. upto Floor V Level, Excluding the cost of Centring , Shuttring, Finishing and Reinforcement: (Cast in situ) 1:1.5:3 (1 Cement : 1.5Coarse Sand: 3 Graded Stone Aggregete 20mm Nominal Size). |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: (a) Foundations, footings, bases of columns, etc. for mass concrete. |
| 11 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 12 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 13 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to Plinth Level. Thermo-Mechanically Treated bars |
| 14 | 12 mm cement plaster of mix: 1:6 (1 cement: 6 coarse sand) |
| 15 | Steel work welded in builtup sections/ framed work, including cutting , hoisting, fixing in position and applying a priming Coat of Approved steel primer using Structural Steel etc. as Required In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 16 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: |
| 17 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 18 | Supplying sand Filling in plinth with jamuna sand under floors, including watering, ramming, Consolidating and dressing complete. |
| 19 | Supply and fixing of Indiamark Handpump including making chabutara of dia 2mtr and 45mtr lowering (depth) and Pvc assembling, Blinding Pipe strainer and 63mm/110mm dia PVC Pipe etc. (Pressure 6.0kg/cmsqr) including all labour & material and T&P complete as required as per direction of engineer-in charge. Please Enable Macros to View BoQ information |