Indian Tenders

Tender Notice

TDR 55883504
Tendering Authority Yamuna Expressway Industrial Development Authority
Tender No YEA/GM(PROJECT)/2026/517 DT-04/06/2026
Tender ID 2026_YEIDA_1157329_8
Tender Brief Corrigendum : Tender For Construction Of Chabutara With Shed And Approch Road For Shamshan Ghat In Village- Mukeempur Shevara , Yea
City YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY
State Uttar Pradesh
Document Fees INR 840 /-
EMD INR 23900.0 /-
Tender Value INR 11.91 Lakhs /-
Tender Type Tender
Bidding Type Open Tender
Competition Type Indian

Tender Details

Tender for Construction Of Chabutara With Shed And Approch Road For Shamshan Ghat In Village- Mukeempur Shevara , Yea

Corrigendum Details

Sr No CorrigendumDate Corrigendum CorrigendumType NewSubmissionDate
1 18-06-2026 Corrigendum Date 25-06-2026

Key Dates

Publish Date 18-06-2026
Last Date of Bid Submission 25-06-2026
Tender Opening Date 29-06-2026

Contact Information

Company Name Yamuna Expressway Industrial Development Authority
Contact Person GM(P)
Address YAMUNA EXPRESSWAY INDUSTRIAL DEVELOPMENT AUTHORITY

BOQ Items

Name of Work:- Construction of chabutara with shed and Approch Road for shamshan ghat in village- Mukeempur shevara , YEA
Sl. No. Item Description
1Cleaning jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1m aboveground level and removal of rubbish up to distance of 50m out side the periphery of the area cleared DAR-18/2.31
2Item code morth 301 Excavtion in soil using hydraulics excavator and tippers with disposal upto 1000 meters. Excavation for road work in soil with hydraulics excavator including cutting and loading in tippers, trimming bottom and side slopes in accordance witrequiremements of lines , grades and cross section and transportation to the embankment location within all lifts and lead upto 1000 meters
3Earth work in rough excavation , banking excavaated earth in layers not exceeding 20 cm in depth, breaking clods watering, rolling each layer with 1/2 tonnes roller or wooden or steel rammer and rolling every 3rd and top most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, all leads as per ( A.R. ) For all kind of soil. Construction of embankment with approved material obtained from borrow pits with all lift and leads transporting to site spreading ,grading to required slope and compacting to meet requirement of table 300-2 up to 5 km Morth 2019/3.16/305
4Cement Concrete with 4 cm gauge approved stone ballast coarse sand & cement in the proportion of 8:4:1 including supply of all materials labour tools & plants etc reguired for proper complection of the work -UPPWD SOR /281/P-17
5M-150 brick work in 1:4 cement & fine sand 1.25F.M mortar in foundation and plinth including supply of all materials labour complection of the work UPPWD SOR 303 Same as item no 305 but in 1:4 one ceement & four coarse sand of 2.20 F.M mortar UPPWD SOR 2020/305a
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : \\"1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size).(UPPWD/SOR-2020/361)
712mm cement plaster of mix:1:6 (1 cement : 6 coarse sand) UP PWD SOR-2020
8Dry brick on edge flooring in required pattern with bricks of class designation150 on a bed of earth including fillingcompressed with M-150Bricks (DAR/11.2/AR/YEIDA/BasedonUPPWD/SOR-2020)
9Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm)New work (three or more coats) (DAR/13.44.1//BasedonUPPWD/SOR-2020)
10Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.l. limpet washers or with G.l. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00mm thick with zinc coating not less than 275gm/m2 (DAR/12.1.1//BasedonUPPWD/SOR-2020)
11Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) UPPWD/SOR-2020/284)
12Reinforced cement concrete work in walls (any thickness), including attached piLasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level excluding cost of centering, shuttering, finishing and reinforcement:1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) UPPWD/SOR-2020/285)
13Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns, etc. for mass concrete. (DAR/5.9.1/BasedonUPPWD/SOR-2020)
14Lintels, beams, plinth beams, girders, bressumers and cantilevers.(DAR/BasedonUPPWD/SOR-2020)
15Columns, Pillars, Piers, Abutments, Posts and Struts.(DAR/5.9.6/Based on UPPWD/SOR-2020)
16Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to Plinth Level.Thermo-Mechanically Treated bars.(DAR/5.22.6/BasedonUPPWD/SOR-2020)
17Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position andapplying a priming coat of approved steel primer, including welding andbolted with special shaped washers etc. complete.(DAR/10.25.2/BasedonUPPWD/SOR-2020)
18Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work (DAR/13.61.1/BasedonUPPWD/SOR-2020)
19construction of grnular sub- base by providing close graded material ,mixing in mechanical mix plant at OMC Carriage of mixed material to work at site spreading uniform layers with motor grader on prepared sursace and compacting with vibrator rollar to achieve the desired density,complete as per clause 401 for grade-I MATERIAL (AR/YEIDA/BasedonUPPWD/SOR-2020)
20Providing and laying 80mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of Coarse sand, filling the joints with Coarse sand etc. all complete as per the direction of Engineer-in-charge. (AR/YEIDA/BasedonUPPWD/SOR-2020)
21Supply and fixing of Indiamark Handpump including making chabutara of dia 2mtr and 45mtr lowering (depth) and Pvc assembling, Blinding Pipe strainer and 63mm/110mm dia PVC Pipe etc. (Pressure 6.0kg/cmsqr) including all labour & material and T&P complete as required as per direction of engineer-in charge. Please Enable Macros to View BoQ information

Other Detail

Information Source https://etender.up.nic.in
Download FileName File Description File Size
Download 46023837-fa86-496e-bad8-c349b00e19da.html Tender Documents 0 KB
Download 8.pdf Tender Documents 0 KB
Download BOQ_2168657.xls Tender Documents 0 KB
Download Tendernotice_1 (19).pdf Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.