|
| 1 | Dismantling the existing electrical installations (2 Nos. old SPNDB, 21 Nos. old ceiling fans, 26 Nos. old tubelight fittings, few unused cable) in the room and checking thoroughly the existing lines before disconnecting and dismantling using 1 No. Semi-Skilled & 1 No. Unskilled person for 2 day using co's own tools & tackles. |
| 2 | S & F 2+10 way double door SPN MCB distribution board with IP-42/43 protection including 40A DP MCB isolator, 10 Nos. 6-32 A SPMCB concealed in wall after cutting the wall and mending good the damages to original finish incl.inter connection with suitable size of copper wire and netural link & provision for earthing attachment as required all MCB's are C-Curve and having 10 kA breaking capacity. (Make: Legrand) |
| 3 | S & F 240 V, 3 Nos. 6 A, 3 pin Modular type plug socket with 3 Nos. 6A Modular type switch & 1 No. 16 A, 3 pin Modular type plug socket with 1 No. 16A Modular type switch on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall complete with 2 No. suitable size \\"Ph & N\\" copper bar incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Make: Legrand) |
| 4 | S & F 240 V 6 A Piano key type switch (Brand approved by EIC) (Make: Anchor) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required. |
| 5 | S & F Socket type fan regulator (Step type) (Brand approved by EIC) (Make: Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by screw incl. making necy. connections etc. |
| 6 | S & F of 240V, 9 Watt LED Bulb, colour temperature as per choice of EIC. (Make: Philips / Crompton / Havells) |
| 7 | S & F 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. |
| 8 | Supply & Delivery of 240V, 18 W, 4 Ft. long single / double polycarbonate body LED tubelight with fittings incl. necessary accessories. |
| 9 | (i) Philips TMC 502 2xT-LED 22W with 2 No. Mas LEDTube 1200mm 18W 865 T8 I – 2100lm / Eqv. Crompton, Wipro. |
| 10 | Fixing only single / twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.single / double polycarbonate body LED tubelight with fittings incl. necessary accessories. |
| 11 | Fixing only single / twin fluorescent light fitting complete with all accessories directly on wall / ceiling / HW round block and suitable size of MS fastener. |
| 12 | S & F of 240V, 50Hz, 1200 mm (48 inch) sweep AC, antidust ceiling fan having minimum speed of 320 rpm or higher, minimum air delivery of 230 CMM or higher and electric consumption of 74W or lower including all its accessories. (Make: Crompton Aura Prime Antidust / Orient Quasar Ornamental / Havells Eq.) |
| 13 | Extra for supplying additional wire for down rod & painting the rod exceeding 30 cm by 2x1.5 sqmm flexible copper wire. |
| 14 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire. |
| 15 | Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) (Make: Polycab / KEI / Gloster / Havellls) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate and 2 no. suitable size “Ph & N” copper bar & earthing attachment fixed on wall incl. mending good damages to original finish. |
| 16 | (i) Average run 12 mtr |
| 17 | (ii) On board. |
| 18 | S & F of 20 mm size PVC Rigid Conduit 'FR' [Precision Make] on wall, ceiling with saddles and other accessories as required and mending good damages to building works. |
| 19 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Make: Polycab / KEI / Gloster / Havells) (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required. |
| 20 | (i) 3 x 1.5 Sqmm. |
| 21 | (ii) 2 x 2.5 sqmm + 1 x 1.5 sqmm. |
| 22 | (iii) 2 x 4 sqmm + 1 x 2.5 sqmm. |
| 23 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 24 | (i) 3 x 1.5 Sqmm. |
| 25 | (ii) 2 x 2.5 sqmm + 1 x 1.5 sqmm |
| 26 | (iii) 2 x 4 sqmm + 1 x 2.5 sqmm |
| 27 | S & F 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment. |
| 28 | S & F 240 V, 40A MCB Isolator on din rail of existing DBs and necessary connection. (Make: Legrand) |
| 29 | S & D of 45W, IP66 LED street light fittings made up of pressure die cast aluminium housing with toughened glass (efficiency>110/120 LPW) equipped with IP66 protection & 10KV SPD complete with all accessories incl. making necy. connections. (Make: Crompton Wanderer Plus TRP-417-45-57-SL-LM-NBK / Eqv. Philips / Havells) |
| 30 | Fixing only outdoor / street light type fluorescent light fitting or MV light fitting complete with all accessories to be fixed /projected from the wall of the building incl. making holes/providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. |
| 31 | S & F waterproof looping cable end box (Make: Sintex, Cat No. GSJB 2014) of size 200 x140 x 90mm deep having 4 mm thick gasketted hinged type top cover comprising of 1 no. 3 way AC/DC terminal bar for connecting incoming & outgoing cable, 1 no 16A capacity Kitkat fuse on din rail with earthing terminal incl. S & F 40x6 mm thick MS clamp with bolts etc. for fixing the box as per direction of EIC. |
| 32 | Supply and Laying 1.1 Kv gr. 2 Core 10 sq.mm XLPE/PVC Al Armoured cable (Make: Havells / Polycab / Gloster / Havells) on wall / surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 33 | S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of 2 Core 10 sqmm XLPE/PVC armoured cable. |
| 34 | Finishing the end of 2 Core 10 sqmm XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. |
| 35 | S & F 2(+1) Module IP-65 rated waterproof cabinet on wall including necessary accessories with S&F 240V, 32A DP MCB Isolator incl. necy. connections, socketing etc. as per direction of EIC. (Make: Legrand) |
| 36 | S & F 240V, OLP-3+, 25A Starter with digital display including S&F of 4 module GI box including necessary connections of starter. (Make: Electron) |
| 37 | S & F suitable size 4/8 Way Copper bar in the existing Switch Board after opening the switch board where necessary as per the direction of EIC. |
| 38 | (i) 8 Way Copper bar. |
| 39 | (ii) 4 Way Copper bar. |
| 40 | Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works. |
| 41 | (i) 300 mm x 200 mm x 65 mm |
| 42 | (ii) 415 mm x 200 mm x 65 mm Please Enable Macros to View BoQ information |