|
| 1 | Surface dressing n exc. 15 cm deep any type of soil complete all as specified and directed by Engineer-in-Charge |
| 2 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation,etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth in soft loose/ hard dense soil and getting out ,etc complete all as specified and directed by Engineer-in-Charge |
| 3 | excavating post hole (or similar holes ) each n exe .0.5 cum gettng out returing ,filling in and ramming earth or broken rubble mixed wit earth around ,in layer not exceeding 25cm ,watering and removing surplus soil to adistance n exe 50 m and marking good surface complete all as specified and directed by Engineer-in-Charge |
| 4 | M & L for hardcore of broken boulders of gauge exc. 63mm but n exc 100mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engineer-in-Charge |
| 5 | M & L for brickwork with subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engineer-in-Charge |
| 6 | M & L for 100 mm thick cement concrete type D2, 1:4:8 (40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed by Engineer-in-Charge |
| 7 | M & L for 75 mm thick cement concrete type B-1, 1:2 :4 (20mm graded stone aggregate) as in flooring complete all as specified and directed by Engineer-in-Charge |
| 8 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finish smooth & even without using extra cement complete all as specified and directed by Engineer-in-Charge |
| 9 | M&L for preparation of new plastered surfaces and applying three coats of white washing complete all as specified and directed by Engineer-in-Charge |
| 10 | M&L for 75mm thick cement concrete type C2 1:3:6 using 20MM aggregate as in plinth protection complete all as specified and directed by Engineer-in-Charge |
| 11 | M&L for providing ,cement concrete in roof kerbs or mud stops ,rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands , plinth courses, string courses lacing courses , papapets and railing upto 60 cm in height ,coping ,kneelers , apex stones ,bed plates kerbs note provided for in terms 04028 , water troughs and like including weathering ,slightly rounded or chamfered angles and throating as directed type C1 1:3:6 (20 MM aggregate) complete all as specified and directed by Engineer-in-Charge |
| 12 | S & F for Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. conforming to Fe.410.Gde-E-250 Quality A etc complete all as specified and directed by Engineer-in-Charge |
| 13 | S&F Mild steel rag or lewis bolts or anchor bolts, of average neck dia 12 mm screwed one end,with hexagonal or square nuts and washers, the other end enlarged and jagged or lewised, not exc 30cm ,etc complete all as specified and as directed by engineer incharge. |
| 14 | S&F roof trusses (framed ), trussed , purlin, crane gantried ,rails and fastening and heavy bracket framing (beam ,tee, angle, channel or flat sections ) including distance pieces ,cleats etc conforming to Fe.410.Gde-E-250 Quality A complete all as specified and directed by Engineer-in-Charge |
| 15 | S&F Pre painted galvanized corrugated mild steel sheeting 0.50 mm thick with coloured having tensile strength of 550 Mps as in roof covering with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge |
| 16 | S&F plain galvanised ,mild steel sheeting ,in ridges, hips ,valley gutters, drip and straight flashing (length and girth as fixed) complete all as specified and directed by Engineer-in-Charge |
| 17 | M & L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-Charge |
| 18 | Removing excavated material (any type ) n exc. 50m depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engineer-in-Charge |
| 19 | M&L for point wiring for light/fan/security light lt with FRLSH cable 1.5 sqmm PVC insulated (red for phase and black for neutral) unsheathed, multi stranded copper conductor 1100 volt grade in and incl not less than 2mm thick PVC casing/caping with all accessories and 1.5 sqmm green in colour PVC multistranded, copper conductor FRLSH cable for earth continuity connected to common earth dolly incl MS sunken box/PVC box, surface/ flush type with 3 mm thick pre laminated hylem sheet for mounting fittings such as switches, sockets, fan regulators etc complete all as specified and directed for one light/fan /bell point controlled by one switch & making good to disturbed surface of wall etc .(Make: Havells,Finolex, Polycab) complete all as specified and directed by Engineer-in-Charge |
| 20 | Supply and fixing surface & wall mounted LED 20W tube light fitting batten 4 feet, mirrorlite slim type with extruded aluminium housing alongwith 20W LED lamp PC body with all accessories complete all as specified and directed by Engineer-in-Charge. Make: Havells ,crompton,syska |
| 21 | S&F switch piano flush button single pole one way 5 amps. complete all as specified and directed by Engineer-in-Charge (Make: Havells,Anchor,Standard) Please Enable Macros to View BoQ information |
