|
| 1 | CIVIL WORK |
| 2 | Rising Main and Bye Pass Arrangement |
| 3 | Supply of ISI marked S&S Centrifugally Cast (Spun) Ductile Iron pipes as per IS : 8329-2000 suitable for Push on jointing by compatible rubber gasket confirming to IS : 9523 : 1980 at divisional store including all taxes |
| 4 | 150 mm dia - Class K-9 PH TO OHT TW-1 |
| 5 | Supply of DI specials as per conformation to I.S.S. suitable for above DI pipes F.O.R. destimation including all taxes and insurance |
| 6 | 150 mm dia DI-K-9 |
| 7 | Excavation for pipe line trenches in ordinary soil (loam, clay or sand) including lift upto 1.5m and refilling, watering, ramming of excavated earth into trenches and disposal of surplus earth up to 50m from the center of thefoundation trenches. |
| 8 | Carting of following sizes D.I. pipes class K-7/9 and specials to the site of work lowering them in to trench and laying true to alignment including testing of pipeline but excluding cost of trenching and cutting of pipes etc. for makingof length but including making joints. |
| 9 | 150 mm dia |
| 10 | Supply of following size screwed down type C.I. single ball air valves. |
| 11 | 50 mm dia |
| 12 | Carting from store to site of works (upto 8Km. or within municipal limit which is more) of following sizes screwed down air valve to site of work, fixing in position including boring and threading in the main etc.complete including cost of boring the water main and subsequent back filling but excluding cost of air valve. |
| 13 | 50 mm dia. |
| 14 | Supply of all materials, labour T&P etc. and construction of air valve chamber complete required for proper completion of the work as per type design (with RCC cover) |
| 15 | Provision of construction of RCC thrust block of grade M-20 for water hammer at bends of pipe. |
| 16 | Supply of reinforcement including cutting bending etc complete for surface reinforcement. |
| 17 | R.C.C. Over Head tank (OHT) |
| 18 | Design, Supply of all materials, labour, T&P etc required for construction of Intz type RCC Over Head Tank including various works like -Ventilator and Water level indicator, Lightening conductor, D.I. D/F Verticle pipes (Inlet Pipe, Outlet Pipe, Overflow Pipe & Washout Pipe), duck foot bend, puddle collers and bell mouths, Sluice valve on inlet, outlet & washout pipe and Valve Chamber, Bye-pass arrangement of OHT, Flooring, Apran & Drain (100 mm thick PCC of 1:2:4 & 100 mm thick RCC of 1:1.5:3), Floor shall be 30 cm above the finished ground level of Campus, Two coat apex painting over one coat primer of approved colour after finishing of RCC surface with grinder, repair of pin holes, unevenness., Railings - G.I. Pipe railing around stair case (both sides), balcony & top dome periphery, S.S ladder from opening of top dome to bottom dome, Stair case (Seperate two column based RCC staircase and 1 m wide balcony with arrangement of M.S Gate and Jali), Food grade epoxy coating of FOSROC / Ciba-Geigy or reputated brand on inside surface area of water container after testing for water tightness, of capacity and staging mentioned as under: For bidding purpose, bearing capacity of soil shall be considered as 8t/sq.m. Working design shall be based on the SBC determind after soil investigation / 8 tonne/sqm.Note :- The bid price of Over Head Tanks is to be submitted considering netsafe allowable bearing capacity as 8 t/m2, keeping the minimum foundation depth to be 2.5 m below existing ground level at the site of work. |
| 19 | The successful bidder will be required to investigate the soil bearing capacity. If net safe allowable bearing capacity is found to be equivalent or more than 8 t/m2, the design of OHT will be based on 8 t/m2 capacity. However, in case the net safe allowable bearing capacity is found to be below 8 t/m2, then the design of OHT will be based on the actual bearing capacity.The contractor has to accommodate for the additional cost required, in the eventuality of net safe allowable bearing capacity falling below 8 t/m2. |
| 20 | Construction OHT of 350 Kl Capacity / 24 m Staging in Zone P.M.AWAS Yojna including Testing of Bearing Capacity of Soil from a recognized Govt, Engineering College or as directed by department. In case of change in staging is done,Then the rate of change is taken @ 25000.00/m staging. |
| 21 | Construction Of Pump House |
| 22 | Construction of pump House as per type and Design including supply of all materials labours T&P etc Complete |
| 23 | Distribution Network (90-450mm) HDPE and DI K-7 |
| 24 | Supply of following sizes and type of pipes with all jointing materials such as socket, rubber gasket as per IS 4984/1995 and IS-8329/2000 or their latest amendment including F.O.R. destination and all taxes and insurance etc.with loading, unloading and stacking all complete. |
| 25 | HDPE Pipe |
| 26 | 90 mm dia HDPE Pipe PN-6, PE:100 |
| 27 | 110 mm dia HDPE Pipe PN-6, PE:100 |
| 28 | 140 mm dia HDPE Pipe PN-6, PE:100 |
| 29 | 160 mm dia HDPE Pipe PN-6, PE:100 |
| 30 | Supply of specials for above Pipes. |
| 31 | HDPE pipe @5% |
| 32 | 90 mm dia HDPE Pipe PN-6, PE:100 |
| 33 | 110 mm dia HDPE Pipe PN-6, PE:100 |
| 34 | 140 mm dia HDPE Pipe PN-6, PE:100 |
| 35 | 160 mm dia HDPE Pipe PN-6, PE:100 |
| 36 | DI K-7 Pipe |
| 37 | 200 mm dia DI Pipe K-7 |
| 38 | D.I. Pipe @10% |
| 39 | 200 mm dia |
| 40 | Supplying the following dia DI butterfly /sluice valves, class I, working pressure 10 Kg/cm2 confirming to IS: 780/1969 or its latest amendments, including valve fittings & Dismantling Joints as per requirement F.O.R. destination, and lowering them into the already prepared trenches, complete and also including supply of jointing materials etc. complete .including all taxes and insurance, as per instructions of Engineer -in -charge. |
| 41 | Sluice valve |
| 42 | 80 mm dia |
| 43 | 100 mm dia |
| 44 | 150 mm dia |
| 45 | 200 mm dia |
| 46 | Scoure valve |
| 47 | 80 mm dia |
| 48 | Supply of single / double ball type air valve conforming to latest/relevent I.S. specifications including all taxes and insurance, complete (including supply of jointing materials and Valve fittings etc complete) as per instructions of Engineer. |
| 49 | 50 mm |
| 50 | Supply of under ground sluice value type fire hydrant consisting of 80 mm dia sluice valve, 80mm dia tail pieces, 80mm dia duck foot bend and 80 mm dia standard makes iron coupling with cap and etc. complete conforming to latest/relevent I.S. specifications including all taxes and insurance up to site of work (including supply of jointing materials and Valve fittings etc. complete as per instructions of Engineer ‐in ‐ charge. |
| 51 | Excavation for pipeline work in Ordinary Soil with lift up to 1.5 M and lead up to 50 M including filling back the excavated earth into the trenches with watering, ramming and disposal of surplus earth with in 50 M lead.As perDesign |
| 52 | In ordinary soil |
| 53 | Carting of following size & type of pipes and specials from departmental store to site of work and lowering them into the trenches and laying true to alignment and gradient and jointing etc. complete including testing of pipelines and cutting of pipes. |
| 54 | HDPE Pipe |
| 55 | 90 mm dia HDPE Pipe PN-6, PE:100 |
| 56 | 110 mm dia HDPE Pipe PN-6, PE:100 |
| 57 | 140 mm dia HDPE Pipe PN-6, PE:100 |
| 58 | 160 mm dia HDPE Pipe PN-6, PE:100 |
| 59 | DI K-7 Pipe |
| 60 | 200mm dia |
| 61 | Carting of following sizes C.I.D./F Sluice Valve and specials from departmental store to site of work and lowering them into the trenches, fixing in position and jointing them with pipelines and testing etc. completeincluding supply of jointing materials. |
| 62 | Sluice valve |
| 63 | 80 mm dia |
| 64 | 100 mm dia |
| 65 | 150 mm dia |
| 66 | 200 mm dia |
| 67 | Scour Valve |
| 68 | 80 mm dia |
| 69 | Carting from store to site of works(upto 8Km. or within municipal limit which is more) of 80mm dia size flanged fire hydrant to site of work, fixing them in position for flanged joints . |
| 70 | Carting from store to site of works (upto 8Km. or within municipal limit which is more) of following sizes screwed down air valve to site of work, fixing in position including boring and threading in the main etc.complete including cost of boring the water main and subsequent back filling but excluding cost of air valve. |
| 71 | 50 mm |
| 72 | Supply of all materials, labour, T&P etc. and construction of sluice valve/scour valve chamber as per type design. |
| 73 | Surface box type including supply and fixing of 150mm x 150 mm size surface box. (upto 125 mm dia valve) |
| 74 | Masonry type with RCC cover (more than 150 mm dia valve) |
| 75 | Supply of all materials, labour T&P etc. and construction of air valve chamber complete required for proper completion of the work as per type design (with RCC cover) |
| 76 | Supply of all materials, labour, T&P etc. and construction of fire hydrant chamber complete required for proper completion of the work as per type design (with RCC cover) |
| 77 | Design and construct Thrust Block made in R.C.C. with cement, coarse sand & 20 mm gauge stone ballast in proportion of 1:1.5:3, for pipe line, including supply of MS reinforcement wrought to required shape as necessary ,its bending, fixing & binding the same with 0.50 mm thick binding wire in position & necessary centering & shuttering including curing and supply of all materials, labour, T & P etc. required for proper completion of the work and as per specifications for RCC work as per instructions of Engineer -in -charge. |
| 78 | Providing reinforcement of Thrust block for reinforced concrete work including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with wire at every inter-section, complete as per drawing and direction. |
| 79 | Dismantling of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. and also including temporary reinstatement of road by old materials. |
| 80 | CC Road |
| 81 | Inter locking tile Road |
| 82 | Permanent reinstatement of following type of road surface including sorting out and stacking of serviceable materials and disposal of unserviceable materials upto distance of 50m. |
| 83 | CC Road |
| 84 | Inter locking tile Road |
| 85 | Shifting (Payment made to other department) of existing services like electric pole, telephone pole, gas pipe line, etc during the execution of work as per requirement |
| 86 | Houseconnection (Rate taken as average of Houseconnection in detailed estimate without road dismantling) |
| 87 | Boundary Wall, Gate & Approach Road |
| 88 | Supply of all materials, labour T&P etc. for construction of boundary wall as per departmental type design at water works required for proper completion of work. |
| 89 | Supply and fixing of 3.60 m wide main gate & 1.20 m wide wicket gate including construction of pillars as per departmental type design including supply of all materials, labour, T&P etc. required for proper completion of works. |
| 90 | Provide all meterial, labour, T&P etc. required for proper completion of work including leveling, dressing for development of water works site. |
| 91 | Filling of carted earth in water works campus. |
| 92 | Supply of all materials, labour T&P etc. and construct Interlocking road in water works compound. |
| 93 | Construction of 300x300 mm size drain |
| 94 | Construction of Artificial Recharging of Ground water hrough roof top rain water of pump house, bypass chamber’s water & overflow of O.H.T. supplying of all material, pipes, grates, etc. complete in all respect. (Unit Estimate Attached) |
| 95 | Provision of Lighting in campous as per direction of Engineer-in-charge including all materials , labour T&P etc complete. |
| 96 | Water Campus |
| 97 | Provision of land ecapping and aboriculture in campus as per direction of Engineer-in- charge including all materials, labour T&P etc complete. |
| 98 | E/M WORK |
| 99 | Drilling of Borehole for Tubewell construction by RC/DC Rig Machine including transportation, erection, dismantling of Rig and assosiated T&P complete in all respect including requried all material, labour etc. |
| 100 | Transportation, Erection, Dismantling of Rig Machine |
| 101 | Drilling of 600 mm. dia bore from G.L. to 72 m |
| 102 | 0 to 72 M. BGL |
| 103 | Drilling of 500 mm. dia bore from 72 M to 100 m |
| 104 | 72 M to 100 M. BGL |
| 105 | Drilling of 500 mm. dia. Bore from 101 M to 200 M |
| 106 | 101 M to 200 M. BGL. |
| 107 | Drilling of 500 mm. dia. Bore from 201 M to 300 M |
| 108 | 201 M to 300 M. BGL. |
| 109 | Drilling of 500 mm. dia. Bore from 301 M to 400 M |
| 110 | 301 M to 400 M. BGL. |
| 111 | Logging of bore hole by departmental/Approved electric logger |
| 112 | Zone Testing |
| 113 | Zone Testing in water quality problem areas including all required material, labour, T&P etc. complete in all respect. |
| 114 | Cement Sealing of Contaminated accufer/Zone including all required material, labour, T&P etc. complete in all respect. |
| 115 | Cement Sealing Work |
| 116 | Supply & Lowering of 90 mm dia UPVC gravel feed pipe in both side of T.W. assembly. |
| 117 | Tubewell assembly : |
| 118 | M.S. tubewell assembly with all required parts like plain, slotted pipe (as required upto 50% of plain pipes) rings, well cap, bail plug, clamp, reducer, central guide, support structure etc. as required & per typed design complete in all respect. As per IS- 4270 |
| 119 | 300 MMØ Housing Pipe,(Plain pipe/slotted pipe) 7.1 mm thick |
| 120 | 200 MMØ Plain Pipe 7.1 mm thick |
| 121 | 200 MMØ Slotted Pipe 7.1 mm thick |
| 122 | Lowering of Tube Well assembly duly welded including welding electrode and shrouding of pea Gravel complete in all respect. |
| 123 | 300 mm. dia. Housing Pipe, (Plain pipe/slotted pipe)from G.L to 66 M BGL |
| 124 | 0 M to 66 M. BGL |
| 125 | 200 mm. dia Plain/Slotted Pipe 66 M. BGL to 100 M BGL |
| 126 | 66 M to 100 M. BGL |
| 127 | 200 mm. dia Plain/Slotted Pipe |
| 128 | 101 M. BGL to 200 M. BGL |
| 129 | 200 mm. dia Plain/Slotted Pipe |
| 130 | 201 M. BGL to 300 M. BGL |
| 131 | 200 mm. dia Plain/Slotted Pipe |
| 132 | 301 M. BGL to 370 M. BGL |
| 133 | Pea Gravel |
| 134 | Transportation, Installation Dismantling of 600 PSI Compressor |
| 135 | Charges for Development by 600 PSI Compressor per hour |
| 136 | Transportation, Erection Dismantling of 1 Cusec OP Unit and Yield test. |
| 137 | Charges for Development of TW by 1 Cusec OP Unit |
| 138 | Chemical and Bacteriological Test of water sample from departmental/ approved Lab. |
| 139 | Watch & Ward during construction period. |
| 140 | Barricading around the pit to prevent any posible Accident |
| 141 | Pumping plant for above T/W- |
| 142 | SITC of 1000 LPM, 57 M head (both tentative) for tubewells Pumping plant consisting of control panel having soft starter (item as mentioned below) alongwith by pass star delta Starter, capacitor bank, breakers , cable, Main Piping (150mm,7.1mm thickness) & reflux valves with 24 mtr. Column pipe, Electronic type Chlorinating plant Power wiring, earthing, painting, Tools sets, wiring of pump house (internal & External) Chain Pulley block and gauges complete in all respect with all required material, T&P and labour etc. |
| 143 | Spare Column Pipe 3 M Long heavy Duty |
| 144 | SITC of servo Stabilizer 30 KVA or suitable capacity |
| 145 | Sluice valves with motor operated actuator valves of size 150 mm or suitable size |
| 146 | CE/UL Certified electromagnetic flowmeter of size 150mm or suitable size |
| 147 | Bypass S/D Soft starter 25 HP or suitable capacity |
| 148 | CE/UL Certified hydrostatic type sub soil watel levei transmitter for T/W |
| 149 | CE/UL Certified Pressure transmitter |
| 150 | SCADA Compatible Automatic chlorinator for OHT |
| 151 | CE/UL Certified Radar type tramsmitter for OHT |
| 152 | Residual chlorine analyzer |
| 153 | Trial Run for operating staff including all consumables i.e. chlorine etc. excluding electricity for 03 months |
| 154 | AUTOMATION OF UNIT OF T/W (SCADA)- |
| 155 | CE & UL Certified RTU/PLC in IP 54 enclosure suitable to communicate with GSM based modem unit with CPU & power supply with analog & digital parameters & features as specified for T/W to store and transmit data on GSM Backbone.RTU/PLC designed with logic to transfer data at multiple stations as specified in tender documents(Including of ONLINE UPS SYSTEM, Single Phase 230 V, 50 Hz with 2 hour backup SMF battery bank as per specification- 1 KVA Capacity). |
| 156 | GSM/GPRS based wireless communication 4G modem for RTUs/PLC capable to transfer data from remote site to CS with all accessories included with signal enhancer antenna made for pumping plant internet charges as specified in tender documents. |
| 157 | CE/UL Certified Intelligent energy meters |
| 158 | Auto phase reversal Unit 100 Amp or suitable capacity |
| 159 | CE/UL Certified Surge Protector for control panel |
| 160 | CE/UL Certified 7\\" HMl touch screen suitable to communicate with PLC/RTU for Local display and control of Process Parameters |
| 161 | Control panel with IP 54 protection, industrial grade for all equipments( Separate for control 24 V and power equipments |
| 162 | Complete cabling of tubewell including all power & control cable for T/W |
| 163 | Installation,Testing and commissioning |
| 164 | Trial run 3 months |
| 165 | FLUORIDE REMOVAL PLANT ( to be supplied only after confirmation of presence of fluoride after yield test) |
| 166 | Supply, Installation, Commissioning and 2 Yrs O&M of Fluoride removal plant (Vendor have to select Technology based on capacity Electrolytic de-fluoridation plant or Media based system or nano technology) of desired capacity for treatment of TubeWell water to desirable quality as per BIS: 10500, as per satisfaction of engineer-in-charge and carrying the treated water to OHT for distribution of potable water to households through the distribution network water supply schemes. During O&M all consumables for continous effective running of plant to be provided by contractor for which no claim in this regard will be admissible |
| 167 | Treatment Unit of 1000 LPM capacity for treatment of Iron/Arsenic and Nano Fluoride Removal Plant |
| 168 | Civil Foundation Works (11x8x1) m3 including shed and MS Fencing Works Complete Please Enable Macros to View BoQ information |
