|
| 1 | PSC Pole 200 Kg WL(8mtr). |
| 2 | ACSR Rabbit Conductor (50 mm2) |
| 3 | LT Bracket Vertical formation |
| 4 | LT Back clamp (50x6mm) for LT angle (non galvanized)(0.55Kgs each) |
| 5 | L.T XLPE AB Cable 3Cx50+35sq.mm for overhead LT line complete job as per direction of E/I . |
| 6 | Suspension clamp suitable for 70-95 Sq.mm Bare messenger (Including 1 No Suspension clamp with Bracket +2 Mtr SS Strap+ 2Nos SS buckle. |
| 7 | Dead end clamp suitable above 70 sq.mm Bare messenger (Including 1 No Dead End Bracket + 1 No Dead End +2 Mtr SS Strap + 2 Nos. ss buckle) |
| 8 | Stainless steel strip strip of 20mm X1mm X1000mm with buckle clip. |
| 9 | Aluminium binding wire |
| 10 | Supplying and errection of stay set complete (galvanized) with 19/20 mm dia X 1.8 meters long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble stay clamps, bow tightner, 7/4.00 mm dia G.I stay wire and strain insulator in cement concrete 1:3:6 foundation including excavation and refilling as required. |
| 11 | Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required. |
| 12 | Dismantling of over head lines comprising of copper/aluminiumoverheadconductor , G.I wire , cross arms , insulators etc as required.(considering sqirrel 4 wire 1.0 Km @ 85 kg/Km) |
| 13 | Dismantling of pole/ street light standard /strut embedded in brick ballast foundation etc as required |
| 14 | Providing and fixing following rating and breaking capacity MCCB with thermmagneticreease and terminal spreaders in existing cubicle panel board including drilling holes in metal board ,making connection etc as required. 250 Amp ,35 KA ,fixed thermal setting |
| 15 | Supplying and fixing following way single pole and neutral ,sheet steel, MCB distribution board ,240 volt on surface/recess complete with tinned copper bus bar etc as required.(without MCB /RCCB/ISOLATOR) 16 way, Double door (for MCCB) |
| 16 | Supplying and fixing following way single pole and neutral ,sheet steel, MCB distribution board ,240 volt on surface/recess complete with tinned copper bus bar etc as required.(without MCB /RCCB/ISOLATOR) 4 way, Single door |
| 17 | Supplying and fixing 6 amps to 32 amps rating 240 volts ,10 KA C curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection ,testing and commissioning etc as required. 50/63 amps,TPN |
| 18 | Providing and fixing following capacity busbar chamber with 4 strips of length 300mm made of copper suitable for following capacity complete with all accessories including connection ,earthing the body etc as required. 200 amps |
| 19 | Providing and fixing following capacity 4 pole ON/OFF load changeover switches with side handle operation ,in sheet enclosure in existing metal board including drilling holes in metal board ,maxingconnection ,earthing the body etc as required. 100 amps ,4 pole |
| 20 | FR PVC insulated 3 core 4 sq.mm copper wire (for temporary arrangement in field ) |
| 21 | 50 mm dia Earthing Electrode 3 mtr length & Backfill compound chemical 4 Bag (per bag 25 Kg) |
| 22 | Providing and fixing 4.00 mm dia copper wire on surface/ recess for loop earthing as required. |
| 23 | Supplying following sizes and core PVC/XLPE insulated PVC sheated ,heavyduty , electric cable with for working voltage upto and including 1100 volt. Make –Havells/ Polycab or equivalent. 50 sq.mm,3.5 core |
| 24 | Supplying following sizes and core PVC/XLPE insulated PVC sheated ,heavyduty , electric cable with for working voltage upto and including 1100 volt. Make –Havells/ Polycab or equivalent. 35 sq.mm,3.5 core |
| 25 | Laying of one number PVC insulated and PVC sheated /XLPE power cable of 1.1 KV grade of size exceeding 35 sq.mm but not exceeding 95 sq.mm direct in ground including excavation ,sandcushioning,protectivecovering and refilling the trench etc as required. |
| 26 | Errection of RCC/pcc pole of following length in brick ballast and ramming the foundation ,finishing with 150mm thick cement concrete (1:3:6)layers on top with including excavation and refilling etc as required |
| 27 | SITC of following rating LED street lighting luminarie with pressure die cast housing and toughned glass cover (ip 66 protection) in existing pole/pipe for supply voltage 100-270 V AC ,50Hz .luminaries shall confirm to IS:10322 part-5/section -3and shall be complete with all necessary accessories as required. 90/100 W LED street light |
| 28 | Overhead & C.P @ 14.95% of (Sl.No. 1 to 9) |
| 29 | Add GST @ 18% |
| 30 | Add LWF @1 % Please Enable Macros to View BoQ information |
