|
| 1 | HT Metering |
| 2 | Red Oxide |
| 3 | Prov. ST Pole 9 mtrs long |
| 4 | Prov. RCC Muff with concerete filling |
| 5 | Prov. X- Arm{Channel iron (100x50x6mm) Length :-2800mm x 2Nos for incomer line |
| 6 | Prov MS Angle iron (50x50x6mm), length:(2800mm)x1No for LA's |
| 7 | Prov. X- Arm ( Channel iron ( 75x40x6mm), Length :- (2800 mm x4 No.) for supporting DO fuse unit & GO Switch |
| 8 | Prov. X-arm : [Channel iron (100x50x6 mm) , length : 2800 mmx2 Nos ] |
| 9 | Prov X-Arm [ Channel iron (100x50x6 mm), Length : (460 mm)x2 No for supporting main channel of transformer |
| 10 | Prov. MS Angle Iron (50x50x6 mm), Length :- 2800 mm x 2 Nos |
| 11 | Prov. MS Angle Iron (35x35x5 mm), Length :- 460 mm x 2 Nos |
| 12 | Prov. MS Angle Iron (50x50x6 mm), Length :- 950 mm x 2 Nos for Bed Knee Bracing |
| 13 | GO Switch Handle Supporting:[ Channel iron (75x40x6 mm) , Length : 460 mm |
| 14 | Belt Set MS Angle Iron (50X50x6 mm), Length : (2800 mm) x 2 Nos for CT-PT. |
| 15 | CT PT Unit 25/5A |
| 16 | Control cable 12 core 2.5 Sqmm Copper Cable. |
| 17 | HT Energy Meter (3-Phase, 4-Wire) DLMS compliant -/5 A CT Type. |
| 18 | Prov. GO AB Switch unit (11 KV,400A,25 KA ) Tripple pole O/D type |
| 19 | AAAC 7/3.15mm for Earthing |
| 20 | Prov. Disc insulator sets (complete 1 No Disc ( Porcelain, BS,12 KV,90 KN including Dead End clamps etc ) |
| 21 | Suspension Assembly |
| 22 | Fecade hooks |
| 23 | Prov. Pipe earthing set |
| 24 | Prov. Half clamp (M.S. Flat 50x6 ) |
| 25 | Prov. Full clamp (M.S. Flat 50x6 ) |
| 26 | Prov. Nut & Bolts of various Sizes ( Galvanised / Coated ) [ Preferably 16mm or more ( With flat and spring washer ) |
| 27 | Prov. Aluminium Thimble |
| 28 | Prov Danger plate |
| 29 | Prov. barbed wire |
| 30 | Anchoring assembly |
| 31 | Prov. Aluminium Paint |
| 32 | 11kV XLPE Cable 3Cx35sqmm |
| 33 | End termination kit for HT cable |
| 34 | Transportation Charges complete in all respect. |
| 35 | Erection Charges complete in all respect. Please Enable Macros to View BoQ information |
