|
| 1 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified and directed. |
| 2 | Demolition of brick work, stone/boulder masonry built in cement mortar complete all as specified and directed. |
| 3 | Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed |
| 4 | M&L for PCC 1:4:8 type D2, using 40mm graded crushed stone aggregate, as in foundation filing, and mass concrete , etc complete all as specified and directed. |
| 5 | M&L for PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggragate) as in surface channels and drains complete all as specified and directed. |
| 6 | M&L Brickwork with subclass ‘B’ bricks old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 CM complete all as specified and directed. |
| 7 | M&L Walling of polygonal rubble, uncoursed as wellbonded, bedded solidly hearted, built in built in cement mortar 1:4 CM except stone complete all as specified and directed. |
| 8 | M & L for Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, finished even and smooth without using extra cement complete all as specified and directed |
| 9 | M & L for raised pointing to random rubble masnoary in CM 1:4 etc complete all as specified and directed. |
| 10 | M & L for Providing, cement concrete Type B-0 1:2:4 (12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 11 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 12 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick rough finished surface (Horizontal or sloping) complete all as specified and directed. |
| 13 | M & L for TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 14 | M& L precast reinforced cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover, drain cover , etc incl. formwork complete all as specified and directed |
| 15 | M & L for Reinforced cement concrete (M-25 design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like (20 mm graded aggregate) complete all as specified and directed |
| 16 | M & L for Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed. |
| 17 | S&F Reinforced concrete pipes,600mm dia class NP2, laid and jointed complete with collars. complete all as specified and directed |
| 18 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation or etc, for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in hard dence soil, complete all as specified and directed. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed |
| 20 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point. complete all as specified and directed |
| 21 | M & L for plain cement concrete 1:4:8, type D2( using 40mm graded crushed stone aggregate) 75mm thick as in sub base of floor complete all as specified and directed . |
| 22 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed. |
| 23 | M & L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-40 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed. |
| 24 | M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 25 | M & L for machine cut Kota stone slab flooring 20-25 mm thick over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 26 | M & L for machine cut Kota stone slab flooring 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 27 | M & L in repair for exterior grade designer tiles of any size and design approved by Engr-in-Charge , cooured superior quality, 10mm thick as in wall verticle etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 28 | M & L for extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement including from moulds mitred/stopped ends etc. complete all as specified and directed. |
| 29 | M & L for Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified and as directed |
| 30 | Finishing surface of concrete roads, pavements, by brooming complete all as specified and as directed |
| 31 | M & L forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade A upto 100mm thick concrete slab provided complete all as specified and as directed |
| 32 | M&L Forming Contraction (Dummy) joints Grade 'A' 65mm deep x 10mm wide,filled with sealing compound complete all as specified and directed. |
| 33 | M & L PCC 1:3:6 type C2 using 40mm graded crushed stone aggregate (75 mm thick as in plinth protection & finishing the surface even & fair without using extra cement complete all as specified and directed. |
| 34 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying one coat of cement base paint on walls (upto three storeyed bldgs) complete all as specified and directed. |
| 35 | M & L preparing new plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed. Please Enable Macros to View BoQ information |
