|
| 1 | Manufacturing, supplying and fixing in repair retro reflective Cautionary /warning sign boards of equilateral triangular /circle /rectangle /square shape having each side of 600 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge. |
| 2 | Supply and fixing in repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed |
| 3 | Supply and fix in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed. |
| 4 | S&F in repair Undirectional reflective pavement marker (RPM) or Cats eye (road stud), white/red colour, high intensity ABS Plastic road stud moulded from ASA (Acrylic styrene Acrylonitrate) or (HIPS) High impact polysterene of size varying from 100x100x20mm to 110 x 90x17mm and colour of body amber, red or white, two way reflective 180 degree and fixing of stud with approved high intensity thermoplast adhesive bond & nailing the same on specified section of the road with MS anodised pin of standard pattern of manufacturers 8 x 37 mm long including cutting making holes on road for proper fixing of the same complete all as specified and as directed. Make : 3M (290 series)/Dark eye. Notes: (i) The RPM or road studs shall be tested in accordance with ASTM D 4280. (ii) The road studs shall conform to the Technical speciofications of NHAI (clause No A-8). |
| 5 | S&F in repair Convex Safety Mirror 32inches/80Cm Polycarbonated Traffic Mirror Unbreakable Round Wide-Angle Driveway Mirror,With Adjustable Bracket&Nuts Bolts For Installation . all as specified and directed by Engineer-in-charge. |
| 6 | M & L for preparing bituminous surfaces of road including removal of old loose paint by burning /scraping method and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. inclusive glass bids at the rate of 300 gm/sqm on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed. |
| 7 | Demolition of cement concrete surface in any description |
| 8 | Dismatling Stone slabs,paver block and tiles of any description or thickness in floors, aprons etc. |
| 9 | M&L cement concrete 1;4:8 type D2 (40mm aggregate) 75 mm thick as in sub base |
| 10 | M&L for 50 mm sand cushioning under interlocking in floors including watering and consolidation. |
| 11 | M&L for Machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 with grey cement and pigment grade all as specified and directed. |
| 12 | M&L for filleting in any position and to any shape in cement mortar 1:4 including all mitres, stops etc section of fillet exc 25 but n.exc 50 Sqcm Please Enable Macros to View BoQ information |
