|
| 1 | Dismantling of asbests cement (corrugated, semi corrugated, etc) sheets/steel sheets in roof coverings complete all as specified and directed. |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strenght of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensil strenght of 550Mpa as in roof covering/cladding wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 5 | S&F Rolled section as in main and cross beam hip and jack rafters purlins where connected to common fafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates including welding etc. Gde Fe 410-S including one shop coat of zinc chrome primer complete all as specified and directed. |
| 6 | All as per item No 5.00 above but except steel.Note: Old sheet obtained from dismantling shall be reused |
| 7 | S&F Mild steel for roof trusses (framed), trussed purlins, crane gantires, rails and fasternings and heavy bracket framming (beam, tee, angle, channel or flat sections) including distance pieces, clats including welding etc. and confirm to Gde- Fe-410-0 or Fe 310-0 including one shop coat of zinc chrome primer complete all as specified and directed. |
| 8 | S&F mild steel gusset plates (Plain or chequered) channels, square cut or notched (ordinary and counter sunk foring holes, without any attachement to Fe-290 (Gde E-165) complete all as specified and directed. |
| 9 | S&F mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long dia of neck in exc 12 n exc 20mm complete all as specified and directed. |
| 10 | M&L for PCC 1:2:4 type B2 (using 40mm graded stone agreegate) as in Bed block complete all as specified and directed. |
| 11 | M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 12 | Demolition of brickwork or stone/boulder masonry, built in cement mortar cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast oncrete articles complete all as specified and directed. |
| 13 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solided and slidly hearted, built in CM (1:6) completed as specified and directed. |
| 14 | All as per item No 13.00 above but except stone.Note: Old stone obtained from dismantling shall be reused |
| 15 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed. |
| 16 | S&F mild steel Plate/sheet work such as valley gutter , wind tie, guard bars of window, weapon rack stand and similar work with ends of bars shouldered and/ or riveted, or forged into spikes conforming to Fe 290(Gde E-165) complete all as specified and directed. |
| 17 | M&L for preparation of old painted Steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying a coat of sythetic enamel paint complete all as specified and directed. |
| 18 | M&L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed. |
| 19 | M&L for machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 of 60 mm thickness ,M-35 Grade ,with grey cement & pigment interstion filled with sand and bedded over and including 50 mm thick sand cousion laid uniformly and duly compected with plate vibrator complete all as specified and directed. |
| 20 | S&F fibre glass reinforced translucent corrugated sheeting 3 mm thick with two corrugations side lap fixed with coach screw/J bolt and washer in roof, wall etc. complete all as specified and directed. |
| 21 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame ) complete all as specified and directed. |
| 22 | S&F second class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. |
| 23 | S&F 100 mm size butt hinges, extruded aluminium alloy with galvanised stainless steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed. |
| 24 | S&F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 25 | S&F 300 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. |
| 26 | S&F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed. Please Enable Macros to View BoQ information |
| 27 | S&F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed. Please Enable Macros to View BoQ information |
